X-Git-Url: https://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff_plain;f=doc%2Fhtml%2Fman%2Fuser_caps.5.html;h=f241ea03e37f11f81cbb3947ebee9eab41b454c0;hp=ce284d30f1a871d3027381a0d36a2b46e2586953;hb=9f479192e3ca3413d235c66bf058f8cc63764898;hpb=a6eb34d7fec8170a8715f9e53ca2f96452dd30dd
diff --git a/doc/html/man/user_caps.5.html b/doc/html/man/user_caps.5.html
index ce284d30..f241ea03 100644
--- a/doc/html/man/user_caps.5.html
+++ b/doc/html/man/user_caps.5.html
@@ -1,6 +1,6 @@
-
@@ -41,7 +41,7 @@
-user_caps(5) File Formats Manual user_caps(5)
+user_caps(5) File Formats Manual user_caps(5)
@@ -51,40 +51,40 @@
- tic -x, infocmp -x
+ tic -x, infocmp -x
- Before ncurses 5.0, terminfo databases used a fixed repertoire of
+ Before ncurses 5.0, terminfo databases used a fixed repertoire of
terminal capabilities designed for the SVr2 terminal database in 1984,
and extended in stages through SVr4 (1989), and standardized in the
Single Unix Specification beginning in 1995.
- Most of the extensions in this fixed repertoire were additions to the
+ Most of the extensions in this fixed repertoire were additions to the
tables of boolean, numeric and string capabilities. Rather than change
the meaning of an existing capability, a new name was added. The
terminfo database uses a binary format; binary compatibility was
ensured by using a header which gave the number of items in the tables
for each type of capability. The standardization was incomplete:
- o The binary format itself is not described in the X/Open Curses
- documentation. Only the source format is described.
+ o The binary format itself is not described in the X/Open Curses
+ documentation. Only the source format is described.
Library developers rely upon the SVr4 documentation, and reverse-
engineering the compiled terminfo files to match the binary format.
- o Lacking a standard for the binary format, most implementations copy
+ o Lacking a standard for the binary format, most implementations copy
the SVr2 binary format, which uses 16-bit signed integers, and is
limited to 4096-byte entries.
The format cannot represent very large numeric capabilities, nor
can it represent large numbers of special keyboard definitions.
- o The tables of capability names differ between implementations.
+ o The tables of capability names differ between implementations.
- Although they may provide all of the standard capability names, the
+ Although they may provide all of the standard capability names, the
position in the tables differs because some features were added as
needed, while others were added (out of order) to comply with
X/Open Curses.
@@ -95,7 +95,7 @@
configured with tables which match the terminal databases for AIX,
HP-UX or OSF/1, rather than the default Solaris-like configuration.
- o In SVr4 curses and ncurses, the terminal database is defined at
+ o In SVr4 curses and ncurses, the terminal database is defined at
compile-time using a text file which lists the different terminal
capabilities.
@@ -115,60 +115,60 @@
(box1) box characters primary set
The memory lock/unlock capabilities were included because they were
- used in the X11R6 terminal description for xterm. The box1
+ used in the X11R6 terminal description for xterm. The box1
capability is used in tic to help with terminal descriptions
written for AIX.
During the 1990s, some users were reluctant to use terminfo in spite of
its performance advantages over termcap:
- o The fixed repertoire prevented users from adding features for
+ o The fixed repertoire prevented users from adding features for
unanticipated terminal improvements (or required them to reuse
existing capabilities as a workaround).
- o The limitation to 16-bit signed integers was also mentioned.
+ o The limitation to 16-bit signed integers was also mentioned.
Because termcap stores everything as a string, it could represent
larger numbers.
Although termcap's extensibility was rarely used (it was never the
- speaker who had actually used the feature), the criticism had a point.
+ speaker who had actually used the feature), the criticism had a point.
ncurses 5.0 provided a way to detect nonstandard capabilities,
determine their type and optionally store and retrieve them in a way
which did not interfere with other applications. These are referred to
- as user-defined capabilities because no modifications to the toolset's
+ as user-defined capabilities because no modifications to the toolset's
predefined capability names are needed.
- The ncurses utilities tic and infocmp have a command-line option "-x"
+ The ncurses utilities tic and infocmp have a command-line option "-x"
to control whether the nonstandard capabilities are stored or
- retrieved. A library function use_extended_names is provided for the
+ retrieved. A library function use_extended_names is provided for the
same purpose.
- When compiling a terminal database, if "-x" is set, tic will store a
+ When compiling a terminal database, if "-x" is set, tic will store a
user-defined capability if the capability name is not one of the
predefined names.
Because ncurses provides a termcap library interface, these user-
defined capabilities may be visible to termcap applications:
- o The termcap interface (like all implementations of termcap)
+ o The termcap interface (like all implementations of termcap)
requires that the capability names are 2-characters.
When the capability is simple enough for use in a termcap
application, it is provided as a 2-character name.
- o There are other user-defined capabilities which refer to features
+ o There are other user-defined capabilities which refer to features
not usable in termcap, e.g., parameterized strings that use more
than two parameters or use more than the trivial expression support
provided by termcap. For these, the terminfo database should have
only capability names with 3 or more characters.
- o Some terminals can send distinct strings for special keys (cursor-,
+ o Some terminals can send distinct strings for special keys (cursor-,
keypad- or function-keys) depending on modifier keys (shift,
control, etc.). While terminfo and termcap have a set of 60
predefined function-key names, to which a series of keys can be
assigned, that is insufficient for more than a dozen keys
multiplied by more than a couple of modifier combinations. The
- ncurses database uses a convention based on xterm to provide
+ ncurses database uses a convention based on xterm to provide
extended special-key names.
Fitting that into termcap's limitation of 2-character names would
@@ -181,28 +181,28 @@
terminfo database may have other extensions, ncurses makes explicit
checks for these:
- AX boolean, asserts that the terminal interprets SGR 39 and SGR 49
+ AX boolean, asserts that the terminal interprets SGR 39 and SGR 49
by resetting the foreground and background color, respectively,
to the default.
- This is a feature recognized by the screen program as well.
+ This is a feature recognized by the screen program as well.
- E3 string, tells how to clear the terminal's scrollback buffer.
- When present, the clear(1) program sends this before clearing the
+ E3 string, tells how to clear the terminal's scrollback buffer.
+ When present, the clear(1) program sends this before clearing the
terminal.
- The command "tput clear" does the same thing.
+ The command "tput clear" does the same thing.
RGB
- boolean, number or string, to assert that the set_a_foreground
- and set_a_background capabilities correspond to direct colors,
+ boolean, number or string, to assert that the set_a_foreground
+ and set_a_background capabilities correspond to direct colors,
using an RGB (red/green/blue) convention. This capability allows
- the color_content function to return appropriate values without
- requiring the application to initialize colors using init_color.
+ the color_content function to return appropriate values without
+ requiring the application to initialize colors using init_color.
The capability type determines the values which ncurses sees:
- boolean
+ boolean
implies that the number of bits for red, green and blue are
the same. Using the maximum number of colors, ncurses adds
two, divides that sum by three, and assigns the result to red,
@@ -212,50 +212,50 @@
multiple of three, the blue (and green) components lose in
comparison to red.
- number
+ number
tells ncurses what result to add to red, green and blue. If
ncurses runs out of bits, blue (and green) lose just as in the
- boolean case.
+ boolean case.
- string
+ string
explicitly list the number of bits used for red, green and
blue components as a slash-separated list of decimal integers.
Because there are several RGB encodings in use, applications
which make assumptions about the number of bits per color are
unlikely to work reliably. As a trivial case, for example, one
- could define RGB#1 to represent the standard eight ANSI colors,
+ could define RGB#1 to represent the standard eight ANSI colors,
i.e., one bit per color.
- U8 number, asserts that ncurses must use Unicode values for line-
+ U8 number, asserts that ncurses must use Unicode values for line-
drawing characters, and that it should ignore the alternate
character set capabilities when the locale uses UTF-8 encoding.
- For more information, see the discussion of NCURSES_NO_UTF8_ACS
- in ncurses(3x).
+ For more information, see the discussion of NCURSES_NO_UTF8_ACS
+ in ncurses(3X).
Set this capability to a nonzero value to enable it.
- XM string, override ncurses's built-in string which enables/disables
- xterm mouse mode.
+ XM string, override ncurses's built-in string which enables/disables
+ xterm mouse mode.
ncurses sends a character sequence to the terminal to initialize
mouse mode, and when the user clicks the mouse buttons or (in
certain modes) moves the mouse, handles the characters sent back
by the terminal to tell it what was done with the mouse.
- The mouse protocol is enabled when the mask passed in the
- mousemask function is nonzero. By default, ncurses handles the
+ The mouse protocol is enabled when the mask passed in the
+ mousemask function is nonzero. By default, ncurses handles the
responses for the X11 xterm mouse protocol. It also knows about
- the SGR 1006 xterm mouse protocol, but must to be told to look
+ the SGR 1006 xterm mouse protocol, but must to be told to look
for this specifically. It will not be able to guess which mode
is used, because the responses are enough alike that only
confusion would result.
- The XM capability has a single parameter. If nonzero, the mouse
+ The XM capability has a single parameter. If nonzero, the mouse
protocol should be enabled. If zero, the mouse protocol should
be disabled. ncurses inspects this capability if it is present,
to see whether the 1006 protocol is used. If so, it expects the
- responses to use the SGR 1006 xterm mouse protocol.
+ responses to use the SGR 1006 xterm mouse protocol.
The xterm mouse protocol is used by other terminal emulators.
The terminal database uses building-blocks for the various xterm
@@ -263,29 +263,29 @@
descriptions.
The terminal database building blocks for this mouse feature also
- have an experimental capability xm. The "xm" capability
+ have an experimental capability xm. The "xm" capability
describes the mouse response. Currently there is no interpreter
which would use this information to make the mouse support
completely data-driven.
- xm shows the format of the mouse responses. In this experimental
+ xm shows the format of the mouse responses. In this experimental
capability, the parameters are
- p1 y-ordinate
+ p1 y-ordinate
- p2 x-ordinate
+ p2 x-ordinate
- p3 button
+ p3 button
- p4 state, e.g., pressed or released
+ p4 state, e.g., pressed or released
- p5 y-ordinate starting region
+ p5 y-ordinate starting region
- p6 x-ordinate starting region
+ p6 x-ordinate starting region
- p7 y-ordinate ending region
+ p7 y-ordinate ending region
- p8 x-ordinate ending region
+ p8 x-ordinate ending region
Here are examples from the terminal database for the most
commonly used xterm mouse protocols:
@@ -310,17 +310,17 @@
combinations of modified special keys. There is no standard for what
those keys can send.
- Since 1999, xterm has supported shift, control, alt, and meta modifiers
+ Since 1999, xterm has supported shift, control, alt, and meta modifiers
which produce distinct special-key strings. In a terminal description,
ncurses has no special knowledge of the modifiers used. Applications
- can use the naming convention established for xterm to find these
+ can use the naming convention established for xterm to find these
special keys in the terminal description.
- Starting with the curses convention that key names begin with "k" and
+ Starting with the curses convention that key names begin with "k" and
that shifted special keys are an uppercase name, ncurses' terminal
database defines these names to which a suffix is added:
- Name Description
+ Name Description
---------------------------------------------------------------
kDC special form of kdch1 (delete character)
kDN special form of kcud1 (cursor down)
@@ -334,7 +334,7 @@
These are the suffixes used to denote the modifiers:
- Value Description
+ Value Description
----------------------------------
2 Shift
3 Alt
@@ -352,32 +352,32 @@
15 Meta + Ctrl + Alt
16 Meta + Ctrl + Alt + Shift
- None of these are predefined; terminal descriptions can refer to names
- which ncurses will allocate at runtime to key-codes. To use these keys
+ None of these are predefined; terminal descriptions can refer to names
+ which ncurses will allocate at runtime to key-codes. To use these keys
in an ncurses program, an application could do this:
- o using a list of extended key names, ask tigetstr(3x) for their
+ o using a list of extended key names, ask tigetstr(3X) for their
values, and
- o given the list of values, ask key_defined(3x) for the key-code
- which would be returned for those keys by wgetch(3x).
+ o given the list of values, ask key_defined(3X) for the key-code
+ which would be returned for those keys by wgetch(3X).
- The "-x" extension feature of tic and infocmp has been adopted in
+ The "-x" extension feature of tic and infocmp has been adopted in
NetBSD curses. That implementation stores user-defined capabilities,
but makes no use of these capabilities itself.
- infocmp(1m), tic(1m).
+ infocmp(1M), tic(1M).
- The terminal database section NCURSES USER-DEFINABLE CAPABILITIES
+ The terminal database section NCURSES USER-DEFINABLE CAPABILITIES
summarizes commonly-used user-defined capabilities which are used in
the terminal descriptions. Some of those features are mentioned in
- screen(1) or tmux(1).
+ screen(1) or tmux(1).
- XTerm Control Sequences provides further information on the xterm
+ XTerm Control Sequences provides further information on the xterm
features which are used in these extended capabilities.
@@ -387,7 +387,7 @@
- user_caps(5)
+ user_caps(5)