X-Git-Url: https://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff_plain;f=misc%2Fterminfo.src;h=a0a69185ad4d5e636bfb3df9f366c56fe2a77e62;hp=0d6c109618c8177ca80253a3bce52354fadabde1;hb=45291421bee33c79ffb4c8f0e1b67ca5cc262114;hpb=491a3f08b795f494ae17179338c31a11b18fd433;ds=sidebyside diff --git a/misc/terminfo.src b/misc/terminfo.src index 0d6c1096..a0a69185 100644 --- a/misc/terminfo.src +++ b/misc/terminfo.src @@ -6,8 +6,8 @@ # Report bugs and new terminal descriptions to # bug-ncurses@gnu.org # -# $Revision: 1.312 $ -# $Date: 2007/10/13 17:26:29 $ +# $Revision: 1.721 $ +# $Date: 2018/12/15 21:41:48 $ # # The original header is preserved below for reference. It is noted that there # is a "newer" version which differs in some cosmetic details (but actually @@ -300,32 +300,32 @@ dumb|80-column dumb tty, am, cols#80, - bel=^G, cr=^M, cud1=^J, ind=^J, + bel=^G, cr=\r, cud1=\n, ind=\n, unknown|unknown terminal type, gn, use=dumb, lpr|printer|line printer, OTbs, hc, os, cols#132, lines#66, - bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, + bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n, glasstty|classic glass tty interpreting ASCII control characters, OTbs, am, cols#80, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, - kcud1=^J, nel=^M^J, .kbs=^H, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H, + kcud1=\n, nel=\r\n, .kbs=^H, vanilla|dumb tty, OTbs, - bel=^G, cr=^M, cud1=^J, ind=^J, + bel=^G, cr=\r, cud1=\n, ind=\n, # This is almost the same as "dumb", but with no prespecified width. # DEL and ^C are hardcoded to act as kill characters. # ^D acts as a line break (just like newline). # It also interprets -# \033];xxx\007 +# \033];xxx\007 # for compatibility with xterm -TD 9term|Plan9 terminal emulator for X, am, - OTnl=^J, bel=^G, cud1=^J, + OTnl=\n, bel=^G, cud1=\n, #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities # @@ -334,53 +334,65 @@ vanilla|dumb tty, # ANSI capabilities are broken up into pieces, so that a terminal # implementing some ANSI subset can use many of them. -ansi+local1, +ansi+local1|ANSI normal-mode cursor-keys, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, -ansi+local, +ansi+local|ANSI normal-mode parameterized cursor-keys, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, use=ansi+local1, -ansi+tabs, - cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g, -ansi+inittabs, +ansi+tabs|ANSI tab-stops, + cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, +ansi+inittabs|ANSI initial tab-stops, it#8, use=ansi+tabs, -ansi+erase, +ansi+erase|ANSI clear screen/line, clear=\E[H\E[J, ed=\E[J, el=\E[K, -ansi+rca, +ansi+rca|ANSI relative cursor-addressing, hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, -ansi+cup, +ansi+cup|ANSI absolute cursor-addressing, cup=\E[%i%p1%d;%p2%dH, home=\E[H, -ansi+rep, +ansi+rep|ANSI repeat-character, rep=%p1%c\E[%p2%{1}%-%db, -ansi+idl1, +ansi+idl1|ANSI insert/delete one line, dl1=\E[M, il1=\E[L, -ansi+idl, +ansi+idl|ANSI insert/delete lines, dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, -ansi+idc, - dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, -ansi+arrows, +ansi+idc1|ANSI insert/delete one character, + dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h, +ansi+idc|ANSI insert/delete characters, + dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1, +ansi+arrows|ANSI normal-mode cursor-keys, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, -ansi+sgr|ansi graphic renditions, +ansi+sgr|ANSI graphic renditions, blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, sgr0=\E[0m, -ansi+sgrso|ansi standout only, +ansi+sgrso|ANSI standout only, rmso=\E[m, smso=\E[7m, -ansi+sgrul|ansi underline only, +ansi+sgrul|ANSI underline only, rmul=\E[m, smul=\E[4m, -ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, +ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim, bold=\E[1m, - sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1; + %;%?%p7%t8;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, -ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, +ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold, dim=\E[2m, - sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2; + %;%?%p7%t8;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, -ansi+pp|ansi printer port, - mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, -ansi+csr|ansi scroll-region plus cursor save & restore, +ansi+csr|ANSI scroll-region plus cursor save & restore, csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, +# The normal (ANSI) flavor of "media copy" building block asserts that +# characters sent to the printer do not echo on the screen. DEC terminals +# can also be put into autoprinter mode, where each line is sent to the +# printer as you move off that line, e.g., by a carriage return. +ansi+pp|ANSI printer port, + mc5i, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, +dec+pp|DEC autoprinter mode, + mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, + # The IBM PC alternate character set. Plug this into any Intel console entry. # We use \E[11m for rmacs rather than \E[12m so the string can use the # ROM graphics for control characters such as the diamond, up- and down-arrow. @@ -388,7 +400,9 @@ ansi+csr|ansi scroll-region plus cursor save & restore, # will work with any Intel console, they all seem to have inherited \E[11m # from the ANSI.SYS de-facto standard. klone+acs|alternate character set for ansi.sys displays, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j + \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v + \301w\302x\263y\363z\362{\343|\330}\234~\376, rmacs=\E[10m, smacs=\E[11m, # Highlight controls corresponding to the ANSI.SYS standard. Most @@ -398,14 +412,16 @@ klone+acs|alternate character set for ansi.sys displays, klone+sgr|attribute control for ansi.sys displays, blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 + %t;1%;%?%p9%t;11%;m, sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, use=klone+acs, # Most Intel boxes do not treat "invis" (invisible) text. klone+sgr8|attribute control for ansi.sys displays, invis=\E[8m, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 + %t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=klone+sgr, # Highlight controls corresponding to the ANSI.SYS standard. *All* @@ -415,14 +431,18 @@ klone+sgr8|attribute control for ansi.sys displays, klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, rmul=\E[m, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 + %t;1%;%?%p7%t;8%;%?%p9%t;12%;m, sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, use=klone+acs, # KOI8-R (RFC1489) acs (alternate character set) # From: Qing Long , 24 Feb 1996. klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, - acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, + acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i + \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t + \206u\207v\210w\211x\201y\230z\231{\267|\274}L~ + \225, rmacs=\E[10m, smacs=\E[11m, # ANSI.SYS color control. The setab/setaf caps depend on the coincidence @@ -443,21 +463,29 @@ ecma+color|color control for ECMA-48-compatible terminals, colors#8, ncv#3, pairs#64, op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, +ecma+italics|ECMA-48 italics, + ritm=\E[23m, sitm=\E[3m, + # Attribute control for ECMA-48-compatible terminals ecma+sgr|attribute capabilities for true ECMA-48 terminals, rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, +ecma+strikeout|ECMA-48 strikeout/crossed-out, + rmxx=\E[29m, smxx=\E[9m, + # For comparison, here are all the capabilities implied by the Intel # Binary Compatibility Standard (level 2) that fit within terminfo. # For more detail on this rather pathetic standard, see the comments # near the end of this file. ibcs2|Intel Binary Compatibility Standard prescriptions, - cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, - cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, + cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, - hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, - indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, - smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, + hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, + rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g, + vpa=\E[%i%p1%dd, #### ANSI/ECMA-48 terminals and terminal emulators # @@ -487,7 +515,7 @@ ansi-mini|any ansi terminal with pessimistic assumptions, # ansi-mtabs adds relative addressing and minimal tab support ansi-mtabs|any ansi terminal with pessimistic assumptions, it#8, - ht=^I, use=ansi+local1, use=ansi-mini, + ht=^I, use=ansi-mini, use=ansi+local1, # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL # @@ -516,15 +544,15 @@ ansi-mtabs|any ansi terminal with pessimistic assumptions, # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. # # (Added vt100 , to quiet a tic warning --esr) -ansi77|ansi 3.64 standard 1977 version, +ansi77|ANSI 3.64 standard 1977 version, OTbs, am, mir, cols#80, it#8, lines#24, - bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, - kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, + kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, smso=\E[7m, smul=\E[4m, @@ -541,11 +569,11 @@ ansi77|ansi 3.64 standard 1977 version, pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), OTbs, am, mir, msgr, cols#80, it#8, lines#24, - bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, + bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, - hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g, + hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, use=klone+sgr-dumb, pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), lines#25, use=pcansi-m, @@ -576,7 +604,7 @@ ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, - s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g, + s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g, vpa=\E[%i%p1%dd, use=pcansi-m, ansi+enq|ncurses extension for ANSI ENQ, @@ -596,7 +624,7 @@ ansi|ansi/pc-term compatible with color, # underline, and reverse, which won't matter much if the terminal # can't do some of those. Padding is assumed to be zero, which # shouldn't hurt since xon/xoff is assumed. -ansi-generic|generic ansi standard terminal, +ansi-generic|ansiterm|generic ansi standard terminal, am, xon, cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, use=ansi+rca, use=ansi+erase, use=ansi+tabs, @@ -616,12 +644,48 @@ ansi.sys-old|ANSI.SYS under PC-DOS 2.1, cols#80, lines#25, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, - is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, - khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u, + is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, + khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, u7=\E[6n, use=klone+color, use=klone+sgr8, + +# Keypad: Home=\0G Up=\0H PrPag=\0I +# ka1,kh kcuu1 kpp,ka3 +# +# Left=\0K 5=\0L Right=\0M +# kcub1 kb2 kcuf1 +# +# End=\0O Down=\0P NxPag=\0Q +# kc1,kend kcud1 kc3,knp +# +# Ins=\0R Del=\0S +# kich1 kdch1 +# +# On keyboard with 12 function keys, +# shifted f-keys: F13-F24 +# control f-keys: F25-F36 +# alt f-keys: F37-F48 +# The shift/control/alt keys do not modify each other, but alt overrides both, +# and control overrides shift. +# +# capability for F1-F48 -TD ansi.sys|ANSI.SYS 3.1 and later versions, - el=\E[K, use=ansi.sys-old, + el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, + kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, + kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, + kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, + kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, + kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, + kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, + kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, + kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, + kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, + kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, + kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, + pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%< + %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t + %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p, + use=ansi.sys-old, # # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. @@ -637,9 +701,12 @@ ansi.sys|ANSI.SYS 3.1 and later versions, # Consequently the End keypad key could not be set (it is relatively safe and # actually useful because it sends ^@ O, which beeps and opens a line above). ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, - is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, - rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, - smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, + is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor + \svi\s9-29-86\n\E[;75;8p, + rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80; + 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, + smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p + \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, use=ansi.sys, # # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. @@ -651,11 +718,174 @@ nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, # See ansi.sysk and nansi.sys above. nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, - is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, + is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad + \sredefined\sfor\svi\s9-29-86\n\E[;75;8p, use=ansi.sysk, -#### ANSI console types +#### Atari ST terminals + +# From Guido Flohr . # +tw52|tw52-color|Toswin window manager with color, + bce, + colors#16, pairs#0x100, + oc=\Eb?\Ec0, op=\Eb?\Ec0, + setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 + %{48}%+%c, + setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 + %{48}%+%c, + setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 + %{48}%+%c, + setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 + %{48}%+%c, + use=tw52-m, +tw52-m|Toswin window manager monochrome, + ul, + ma#999, + bold=\Eya, dch1=\Ea, dim=\EyB, + is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, + rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, + smso=\EyQ, smul=\EyH, use=at-m, +tt52|Atari TT medium and high resolution, + lines#30, use=at-color, +st52-color|at-color|atari-color|atari_st-color|Atari ST with color, + bce, + colors#16, pairs#0x100, + is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, + setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} + %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 + %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\: + %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1 + %{14}%=%t6%e?, + setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} + %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 + %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\: + %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1 + %{14}%=%t6%e?, + setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} + %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 + %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e + %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%= + %t6%e?, + setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} + %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 + %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e + %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%= + %t6%e?, + use=st52, +st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, + am, eo, mir, npc, + cols#80, it#8, lines#24, + bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, + il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?, + kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, + kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, + kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, + kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, + kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, + rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, +tw100|toswin vt100 window mgr, + eo, mir, msgr, xon, + colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, + acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, + clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, + cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?, + kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, + kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, + kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, + kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, + knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, + oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, + rmso=\E[m, rmul=\E[m, + rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, + sc=\E7, + setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%= + %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6' + %=%t3%e7%;m, + setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%= + %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6' + %=%t3%e7%;m, + sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, +# The entries for stv52 and stv52pc probably need a revision. +stv52|MiNT virtual console, + am, msgr, + cols#80, it#8, lines#30, + bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, + cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", + dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, + ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, + kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, + kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, + kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, + kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, + op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, + rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, + smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, +stv52pc|MiNT virtual console with PC charset, + am, msgr, + cols#80, it#8, lines#30, + acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j + \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y + \363z\362{\343|\366}\234~\371, + bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, + cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", + dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, + ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, + kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, + kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, + kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, + kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, + rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, + rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, + smso=\Ep, smul=\EyH, + +# From: Simson L. Garfinkel +atari-old|atari st, + OTbs, am, + cols#80, it#8, lines#25, + clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, + ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, +# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode +# From: Paul M. Aoki +uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, + lines#49, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220, +# MiNT VT52 emulation. 80 columns, 25 rows. +# MiNT is Now TOS, the operating system which comes with all Ataris now +# (mainly Atari Falcon). This termcap is for the VT52 emulation you get +# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode +# From: Per Persson , 27 Feb 1996 +st52-old|Atari ST with VT52 emulation, + am, km, + cols#80, lines#25, + bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, + ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, + kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, + kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, + kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, + kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek, + ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, + smcup=\Ee, smso=\Ep, #### BeOS # @@ -663,20 +893,20 @@ nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi beterm|BeOS Terminal, am, eo, mir, msgr, xenl, xon, colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, - bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, + bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, + il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, - nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, + nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, @@ -712,25 +942,29 @@ beterm|BeOS Terminal, # linux-basic|linux console, am, bce, eo, mir, msgr, xenl, xon, - it#8, ncv#18, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, - el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, + it#8, ncv#18, U8#1, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, - kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, + kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;%?%p9%t;11%;m, smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, use=ecma+color, @@ -746,21 +980,65 @@ linux-m|Linux console no color, # 1.9.9. linux-c-nc|linux console with color-change, ccc, - initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x, + initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/ + %02x%p4%{255}%*%{1000}%/%02x, oc=\E]R, use=linux-basic, # From: Dennis Henriksen , 9 July 1996 linux-c|linux console 1.3.6+ for older ncurses, ccc, - initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, + initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255} + %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a' + %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a' + %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx + %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx + %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000} + %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx + %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx + %d%;, oc=\E]R, use=linux-basic, # The 2.2.x kernels add a private mode that sets the cursor type; use that to # get a block cursor for cvvis. # reported by Frank Heckenbach . -linux|linux console, +linux2.2|linux 2.2.x console, civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, cvvis=\E[?25h\E[?8c, use=linux-c-nc, +# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: +# http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html +# Although the kernel has mappings for these, they were not in the default +# font (tested with Debian and Fedora): +# '`' diamond +# '~' scan line 1 +# 'p' scan line 3 +# 'r' scan line 7 +# '_' scan line 9 +linux2.6|linux 2.6.x console, + acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx + xyyzz{{||}c~~, + enacs=\E)0, rmacs=^O, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, use=linux2.2, + +# The 3.0 kernel adds support for clearing scrollback buffer (capability E3). +# It is the same as xterm's erase-saved-lines feature. +linux3.0|linux 3.0 kernels, + E3=\E[3J, use=linux2.6, + +# This is Linux console for ncurses. +linux|linux console, + use=linux3.0, + +# Subject: linux 2.6.26 vt back_color_erase +# Changes to the Linux console driver broke bce model as reported in +# https://bugzilla.novell.com/show_bug.cgi?id=418613 +# apparently from +# http://lkml.org/lkml/2008/4/26/305 +# http://lkml.org/lkml/2008/10/3/66 +linux2.6.26|linux console w/o bce, + bce@, use=linux2.6, + # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file linux-nic|linux with ich/ich1 suppressed for non-curses programs, ich@, ich1@, use=linux, @@ -768,7 +1046,9 @@ linux-nic|linux with ich/ich1 suppressed for non-curses programs, # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. # acsc entry from Pavel Roskin" , 29 Sep 1997. linux-koi8|linux with koi8 alternate character set, - acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, + acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i + \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v + \211w\210x\201y\230z\231{\267|\274~\224, use=linux, use=klone+koi8acs, # Another entry for KOI8-r with Qing Long's acsc. @@ -778,14 +1058,17 @@ linux-koi8r|linux with koi8-r alternate character set, # Entry for the latin1 and latin2 fonts linux-lat|linux with latin1 or latin2 alternate character set, - acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, + acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i + \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u + \215v\301w\302x\205y\363z\362{\343|\330}\234~\376, use=linux, # This uses graphics from VT codeset instead of from cp437. # reason: cp437 (aka "straight to font") is not functional under luit. # from: Andrey V Lukyanov . linux-vt|linux console using VT codes for graphics, - acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz~~, rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, smpch@, use=linux, @@ -805,6 +1088,65 @@ kon|kon2|jfbterm|Kanji ON Linux console, initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, use=linux, +# FbTerm +# Another variant. There are two parts (src, src/lib) with the latter +# comprising the escape-sequence parsing. The copyright notice on that +# says it is based on GTerm by Timothy Miller. +# +# The original developer "dragchan" has left, but as of March 2017 there is +# (still dead) code from May 2015 here: +# https://github.com/izmntuk/fbterm +# +# The acsc string may be incorrect. +# +# Not used here, the program recognizes escapes for italic, underline and +# dim, rendering those as green, cyan and gray respectively. +fbterm|FbTerm for Linux with framebuffer, + colors#0x100, pairs#0x10000, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m, + setab=\E[2;%p1%d}, setaf=\E[1;%p1%d}, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;%?%p9%t;11%;m, + sgr0=\E[0;10m, smacs=\E[11m, use=linux, + +# 16-color linux console entry; this works with a 256-character +# console font but bright background colors turn into dim ones when +# you use a 512-character console font. This uses bold for bright +# foreground colors and blink for bright background colors. +linux-16color|linux console with 16 colors, + colors#16, ncv#42, pairs#0x100, + setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m, + setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m, + use=linux, + +# bterm (bogl 0.1.18) +# Implementation is in bogl-term.c +# Key capabilities from linux terminfo entry +# +# Notes: +# bterm only supports acs using wide-characters, has case for these: qjxamlkut +# bterm does not support sgr, since it only processes one parameter -TD +bterm|bogl virtual terminal, + am, bce, + colors#8, cols#80, lines#24, pairs#64, + acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n, + cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n, + kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, + kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, + op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, + rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, + #### Mach # @@ -812,12 +1154,12 @@ kon|kon2|jfbterm|Kanji ON Linux console, mach|Mach Console, am, km, cols#80, it#8, lines#25, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, - kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, + kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, @@ -830,6 +1172,27 @@ mach-color|Mach Console with ANSI color, dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, +# From: Samuel Thibault +# Source: git://git.sv.gnu.org/hurd/gnumach.git +# Files: i386/i386at/kd.c +# +# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD +mach-gnu|GNU Mach, + acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l + \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x + \263y\363z\362{\343|\330}\234~\376, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, + el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, + indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT, + sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; + 2%;%?%p6%t;1%;%?%p7%t;8%;m, + use=mach, + +mach-gnu-color|Mach Console with ANSI color, + colors#8, pairs#64, + op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, use=mach-gnu, + # From: Marcus Brinkmann # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ # @@ -858,11 +1221,12 @@ mach-color|Mach Console with ANSI color, # # Reading the source, RIS resets cnorm, but not xmous. hurd|The GNU Hurd console server, - am, bce, bw, eo, km, mir, msgr, xon, + am, bce, bw, eo, km, mir, msgr, xenl, xon, colors#8, it#8, ncv#18, pairs#64, - acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, + clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, @@ -870,7 +1234,7 @@ hurd|The GNU Hurd console server, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, - invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, + invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, @@ -878,290 +1242,269 @@ hurd|The GNU Hurd console server, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, - rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, - rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, - sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, - smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, - gsbom=\E[>1h, + kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, + rin=\E[%p1%dT, rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; + 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, + smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h, + use=ecma+italics, -#### OSF Unix +#### QNX # -# OSF/1 1.1 Snapshot 2 -pmcons|pmconsole|PMAX console, - am, - cols#128, lines#57, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, - ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - -# SCO console and SOS-Syscons console for 386bsd -# (scoansi: had unknown capabilities -# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ -# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: -# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ -# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ -# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ -# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based -# on the =\E[12m -- esr) +# QNX 4.0 Console +# Michael's original version of this entry had , , +# ; this was so terminfo applications could write the lower +# right corner without triggering a scroll. The ncurses terminfo library can +# handle this case with the capability, and prefers for better +# optimization. Bug: The capability resets attributes. +# From: Michael Hunter 30 Jul 1996 +# (removed: ) +qnx|qnx4|qnx console, + daisy, km, mir, msgr, xhpa, xt, + colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, + acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t + \303u\264v\301w\302x\263, + bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, + cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, + dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, + il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263, + kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, + kDL=\377\366, kEND=\377\301, kEOL=\377\311, + kEXT=\377\367, kFND=\377\370, kHLP=\377\371, + kHOM=\377\260, kIC=\377\340, kLFT=\377\264, + kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, + kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, + kRDO=\377\315, kRES=\377\374, kRIT=\377\266, + kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, + kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, + kclo=\377\343, kclr=\377\341, kcmd=\377\245, + kcpy=\377\265, kcrt=\377\305, kctab=\377\237, + kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, + kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, + ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, + kext=\377\270, kf1=\377\201, kf10=\377\212, + kf11=\377\256, kf12=\377\257, kf13=\377\213, + kf14=\377\214, kf15=\377\215, kf16=\377\216, + kf17=\377\217, kf18=\377\220, kf19=\377\221, + kf2=\377\202, kf20=\377\222, kf21=\377\223, + kf22=\377\224, kf23=\377\333, kf24=\377\334, + kf25=\377\225, kf26=\377\226, kf27=\377\227, + kf28=\377\230, kf29=\377\231, kf3=\377\203, + kf30=\377\232, kf31=\377\233, kf32=\377\234, + kf33=\377\235, kf34=\377\236, kf35=\377\276, + kf36=\377\277, kf37=\377\321, kf38=\377\322, + kf39=\377\323, kf4=\377\204, kf40=\377\324, + kf41=\377\325, kf42=\377\326, kf43=\377\327, + kf44=\377\330, kf45=\377\331, kf46=\377\332, + kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, + kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, + khlp=\377\350, khome=\377\240, khts=\377\342, + kich1=\377\253, kil1=\377\273, kind=\377\261, + kmov=\377\351, kmrk=\377\355, kmsg=\377\345, + knp=\377\252, knxt=\377\312, kopn=\377\357, + kopt=\377\353, kpp=\377\242, kprt=\377\255, + kprv=\377\302, krdo=\377\336, kref=\377\354, + kres=\377\360, krfr=\377\347, kri=\377\271, + krmir=\377\313, krpl=\377\362, krst=\377\352, + ksav=\377\361, kslt=\377\247, kspd=\377\335, + ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, + rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, + rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, + setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, + smso=\E(, smul=\E[, # -# klone+sgr-dumb is an error since the acsc does not match -TD # -# In this description based on SCO's keyboard(HW) manpage list of default -# function key values: -# F13-F24 are shifted F1-F12 -# F25-F36 are control F1-F12 -# F37-F48 are shift+control F1-F12 +qnxt|qnxt4|QNX4 terminal, + crxm, use=qnx4, # -# hpa/vpa work in the console, but not in scoterm: -# hpa=\E[%p1%dG, -# vpa=\E[%p1%dd, +qnxm|QNX4 with mouse events, + maddr#1, + chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, + mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, + mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, + smicm=\E/>2h, use=qnx4, # -# SCO's terminfo uses -# kLFT=\E[d, -# kRIT=\E[c, -# which do not work (console or scoterm). +qnxw|QNX4 windows, + xvpa, use=qnxm, # -# Console documents only 3 attributes can be set with SGR (so we don't use sgr). -scoansi-old|SCO Extended ANSI standard crt (5.0.5), - OTbs, am, bce, eo, xon, - colors#8, cols#80, it#8, lines#25, pairs#64, - acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, - civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, - dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, - ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, - hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, - ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, - kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, - kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, - kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, - kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, - kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, - kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, - kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, - kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], - kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, - kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, - kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, - rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, - rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, - smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, -scoansi-new|SCO Extended ANSI standard crt (5.0.6), - km, - civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, - cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, - rep=\E[%p1%d;%p2%db, rmm=\E[=11L, - sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, - smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, - smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, - smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, - smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, - wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, - use=scoansi-old, -# make this easy to change... -scoansi|SCO Extended ANSI standard crt, - use=scoansi-old, +# Monochrome QNX4 terminal or console. Setting this terminal type will +# allow an application running on a color console to behave as if it +# were a monochrome terminal. Output will be through stdout instead of +# console writes because the term routines will recognize that the +# terminal name starts with 'qnxt'. +# +qnxtmono|Monochrome QNX4 terminal or console, + colors@, pairs@, + scp@, use=qnx4, -# This actually describes the generic SVr4 display driver for Intel boxes. -# The isn't documented and therefore may not be reliable. -# From: Eric Raymond Mon Nov 27 19:00:53 EST 1995 -att6386|at386|386at|AT&T WGS 6386 console, - am, bw, eo, xon, - cols#80, it#8, lines#25, - acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, - clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, - cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, - indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, - kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, - kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, - kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, - knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, - ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, - sc=\E7, - sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, - sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, - tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color, -# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) -pc6300plus|AT&T 6300 plus, - OTbs, am, xon, - cols#80, lines#24, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, - clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, - cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, - dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, - home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, - invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, - kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, - nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, - smso=\E[7m, smul=\E[4m, tbc=\E[3g, +# From: Federico Bianchi , 1 Jul 1998 +# (esr: commented out and to avoid warnings.) +# (TD: derive from original qnx4 entry) +qnxt2|qnx 2.15 serial terminal, + am, + civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, + rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, -# From: Benjamin C. W. Sittler +# QNX ANSI terminal definition +qansi-g|QNX ANSI, + am, eslok, hs, xon, + colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, + acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, + fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, + ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, + is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, + kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, + kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, + kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, + kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, + kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, + kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, + kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, + kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, + kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, + kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, + kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, + kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, + kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, + kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, + kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, + khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, + kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, + kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, + kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, + ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, + rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, + rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, + tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, # -# I have a UNIX PC which I use as a terminal attached to my Linux PC. -# Unfortunately, the UNIX PC terminfo entry that comes with ncurses -# is broken. All the special key sequences are broken, making it unusable -# with Emacs. The problem stems from the following: +qansi|QNX ansi with console writes, + daisy, xhpa, use=qansi-g, # -# The UNIX PC has a plethora of keys (103 of them, and there's no numeric -# keypad!), loadable fonts, and strange highlighting modes ("dithered" -# half-intensity, "smeared" bold, and real strike-out, for example.) It also -# uses resizable terminal windows, but the bundled terminal program always -# uses an 80x24 window (and doesn't support seem to support a 132-column -# mode.) +qansi-t|QNX ansi without console writes, + crxm, use=qansi, # -# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a -# library which was a superset of SVr3.5 curses (called tam, for "terminal -# access method".) tam includes support for real, overlapping windows, -# onscreen function key labels, and bitmap graphics. But since the primary -# user interface on the UNIX PC was a GUI program (ua, for "user -# assistant",) and remote administration was considered important for the -# machine, tam also supported VT100-compatible terminals attached to the -# serial port or used across the StarLan network. To simulate the extra keys -# not present on a VT100, users could press ESC and a two-letter sequence, -# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, -# however, were not the same as those sent by the actual Undo key. The -# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. -# (If you're interested in adding some of the tam calls to ncurses, btw, I -# have the full documentation and several programs which use tam. It also -# used an extended terminfo format to describe key sequences, special -# highlighting modes, etc.) +qansi-m|QNX ansi with mouse, + maddr#1, + chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, + mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, + mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, + smicm=\E[>2h, use=qansi, # -# KEYS: This means that ncurses would quite painful on the UNIX PC, since -# there are two sequences for every key-modifier combination (local keyboard -# sequence and remote "VT100" sequence.) But I doubt many people are trying -# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the -# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) -# seem to have been built from the manual describing the VT100 sequences. -# This means it doesn't work for a real live UNIX PC. +qansi-w|QNX ansi for windows, + xvpa, use=qansi-m, + +#### SCO consoles + +# SCO console and SOS-Syscons console for 386bsd +# (scoansi: had unknown capabilities +# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ +# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: +# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ +# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ +# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ +# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based +# on the =\E[12m -- esr) # -# FONTS: The UNIX PC also has a strange interpretation of "alternate -# character set". Rather than the VT100 graphics you might expect, it allows -# up to 8 custom fonts to be loaded at any given time. This means that -# programs expecting VT100 graphics will usually be disappointed. For this -# reason I have disabled the smacs/rmacs sequences, but they could easily be -# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) -# manpage), should you wish to do so: +# klone+sgr-dumb is an error since the acsc does not match -TD # -# SGR10 - Select font 0 - ESC [ 10 m or SO -# SGR11 - Select font 1 - ESC [ 11 m or SI -# SGR12 - Select font 2 - ESC [ 12 m -# ... (etc.) -# SGR17 - Select font 7 - ESC [ 17 m +# In this description based on SCO's keyboard(HW) manpage list of default +# function key values: +# F13-F24 are shifted F1-F12 +# F25-F36 are control F1-F12 +# F37-F48 are shift+control F1-F12 # -# Graphics for line drawing are not reliably found at *any* character -# location because the UNIX PC has dynamically reloadable fonts. I use font -# 0 for regular text and font 1 for italics, but this is by no means -# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. +# hpa/vpa work in the console, but not in scoterm: +# hpa=\E[%p1%dG, +# vpa=\E[%p1%dd, # -# MISC: The cursor visible/cursor invisible sequences were swapped in the -# distributed terminfo. +# SCO's terminfo uses +# kLFT=\E[d, +# kRIT=\E[c, +# which do not work (console or scoterm). # -# To ameliorate these problems (and fix a few highlighting bugs) I rewrote -# the UNIX PC terminfo entry. The modified version works great with Lynx, -# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC -# attached by serial cable. In Emacs, even the Undo key works, and many -# applications can now use the F1-F8 keys. +# Console documents only 3 attributes can be set with SGR (so we don't use sgr). +scoansi-old|SCO Extended ANSI standard crt (5.0.5), + OTbs, am, bce, eo, xon, + colors#8, cols#80, it#8, lines#25, pairs#64, + acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM + NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB + x3yszr{c}\034~\207, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, + dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, + ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, + ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, + kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, + kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, + kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, + kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, + kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, + kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, + kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, + kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], + kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, + kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, + kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, + rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, + rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, + smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, +scoansi-new|SCO Extended ANSI standard crt (5.0.6), + km, + civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, + cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, + rep=\E[%p1%d;%p2%db, rmm=\E[=11L, + sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%? + %p7%t;8%;%?%p9%t;12%e;10%;m, + smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, + smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, + smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, + smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, + wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, + use=scoansi-old, +# make this easy to change... +scoansi|SCO Extended ANSI standard crt, + use=scoansi-old, + +#### SGI consoles + +# Sent by Stefan Stapelberg , 24 Feb 1997, this is +# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes +# for the application keypad mode. We have added iris-ansi-ap rather than +# change the original to keypad mode. # -# esr's notes: -# Terminfo entry for the AT&T Unix PC 7300 -# from escape(7) in Unix PC 7300 Manual. -# Somewhat similar to a vt100-am (but different enough -# to redo this from scratch.) -# -# /*************************************************************** -# * -# * FONT LOADING PROGRAM FOR THE UNIX PC -# * -# * This routine loads a font defined in the file ALTFONT -# * into font memory slot #1. Once the font has been loaded, -# * it can be used as an alternative character set. -# * -# * The call to ioctl with the argument WIOCLFONT is the key -# * to this routine. For more information, see window(7) in -# * the PC 7300 documentation. -# ***************************************************************/ -# #include /* needed for strcpy call */ -# #include /* needed for ioctl call */ -# #define FNSIZE 60 /* font name size */ -# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ -# /* -# * The file /usr/lib/wfont/special.8.ft comes with the -# * standard PC software. It defines a graphics character set -# * similar to that of the Teletype 5425 terminal. To view -# * this or other fonts in /usr/lib/wfont, use the command -# * cfont . For further information on fonts see -# * cfont(1) in the PC 7300 documentation. -# */ -# -# struct altfdata /* structure for alt font data */ -# { -# short altf_slot; /* memory slot number */ -# char altf_name[FNSIZE]; /* font name (file name) */ -# }; -# ldfont() -# { -# int wd; /* window in which altfont will be */ -# struct altfdata altf; -# altf.altf_slot=1; -# strcpy(altf.altf_name,ALTFONT); -# for (wd =1; wd < 12; wd++) { -# ioctl(wd, WIOCLFONT,&altf); -# } -# } -# -# (att7300: added /// from the BSDI entry, -# they're confirmed by the man page for the System V display---esr) -# -att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, - am, xon, - cols#80, it#8, lines#24, - bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, - clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, - cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, - ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, - il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, - kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, - kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, - kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, - kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, - kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, - kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, - ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, - kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, - kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, - kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, - kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, - kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, - ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, - rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, - smul=\E[4m, - -# Sent by Stefan Stapelberg , 24 Feb 1997, this is -# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes -# for the application keypad mode. We have added iris-ansi-ap rather than -# change the original to keypad mode. -# -# (iris-ansi: added rmam/smam based on init string -- esr) +# (iris-ansi: added rmam/smam based on init string -- esr) # # This entry, and those derived from it, is used in xwsh (also known as # winterm). Some capabilities that do not fit into the terminfo model @@ -1169,7 +1512,7 @@ att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, # # F1-F12 generate different codes when shift or control modifiers are used. # For example: -# F1 \E[001q +# F1 \E[001q # shift F1 \E[013q # control-F1 \E[025q # @@ -1193,8 +1536,8 @@ iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), am, cols#80, it#8, lines#40, bel=^G, bold=\E[1m, clear=\E[H\E[2J, - cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, - cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, + cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, @@ -1202,15 +1545,15 @@ iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, - kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, - kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, - kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, - kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, - knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, - kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, - rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, - sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q, + kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, + kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, + kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, + kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q, + kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q, + nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8, + rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, iris-ansi-ap|IRIS ANSI in application-keypad mode, is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, @@ -1221,210 +1564,78 @@ iris-ansi-ap|IRIS ANSI in application-keypad mode, iris-color|xwsh|IRIX ANSI with color, ncv#33, csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, - ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, - rmul=\E[24m, rs1=\Ec, + ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sitm=\E[3m, use=vt100+enq, use=klone+color, + use=ecma+italics, use=vt100+enq, use=klone+color, use=iris-ansi-ap, -# The following is a version of the ibm-pc entry distributed with PC/IX, -# (Interactive Systems' System 3 for the Big Blue), modified by Richard -# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, -# (the former is untrue, and the latter failed under UCB/man); standout and -# underline modes have been added. Note: this entry describes the "native" -# capabilities of the PC monochrome display, without ANY emulation; most -# communications packages (but NOT PC/IX connect) do some kind of emulation. -pcix|PC/IX console, - am, bw, eo, - cols#80, lines#24, - clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, - home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, - smul=\E[4m, - -# (ibmpcx: this entry used to be known as ibmx. -# It formerly included the following extension capabilities: -# :GC=b:GL=v:GR=t:RT=^J:\ -# :GH=\E[196g:GV=\E[179g:\ -# :GU=\E[193g:GD=\E[194g:\ -# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ -# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ -# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ -# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate -# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match -# what was there before. -- esr) -ibmpcx|xenix|ibmx|IBM PC xenix console display, - OTbs, am, msgr, - cols#80, lines#25, - clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, - kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, - kpp=\E[Z, use=klone+acs, use=klone+sgr8, - -#### QNX -# - -# QNX 4.0 Console -# Michael's original version of this entry had , , -# ; this was so terminfo applications could write the lower -# right corner without triggering a scroll. The ncurses terminfo library can -# handle this case with the capability, and prefers for better -# optimization. Bug: The capability resets attributes. -# From: Michael Hunter 30 Jul 1996 -# (removed: ) -qnx|qnx4|qnx console, - daisy, km, mir, msgr, xhpa, xt, - colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, - acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, - bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, - cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, - dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, - il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, - kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, - kDL=\377\366, kEND=\377\301, kEOL=\377\311, - kEXT=\377\367, kFND=\377\370, kHLP=\377\371, - kHOM=\377\260, kIC=\377\340, kLFT=\377\264, - kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, - kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, - kRDO=\377\315, kRES=\377\374, kRIT=\377\266, - kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, - kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, - kclo=\377\343, kclr=\377\341, kcmd=\377\245, - kcpy=\377\265, kcrt=\377\305, kctab=\377\237, - kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, - kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, - ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, - kext=\377\270, kf1=\377\201, kf10=\377\212, - kf11=\377\256, kf12=\377\257, kf13=\377\213, - kf14=\377\214, kf15=\377\215, kf16=\377\216, - kf17=\377\217, kf18=\377\220, kf19=\377\221, - kf2=\377\202, kf20=\377\222, kf21=\377\223, - kf22=\377\224, kf23=\377\333, kf24=\377\334, - kf25=\377\225, kf26=\377\226, kf27=\377\227, - kf28=\377\230, kf29=\377\231, kf3=\377\203, - kf30=\377\232, kf31=\377\233, kf32=\377\234, - kf33=\377\235, kf34=\377\236, kf35=\377\276, - kf36=\377\277, kf37=\377\321, kf38=\377\322, - kf39=\377\323, kf4=\377\204, kf40=\377\324, - kf41=\377\325, kf42=\377\326, kf43=\377\327, - kf44=\377\330, kf45=\377\331, kf46=\377\332, - kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, - kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, - khlp=\377\350, khome=\377\240, khts=\377\342, - kich1=\377\253, kil1=\377\273, kind=\377\261, - kmov=\377\351, kmrk=\377\355, kmsg=\377\345, - knp=\377\252, knxt=\377\312, kopn=\377\357, - kopt=\377\353, kpp=\377\242, kprt=\377\255, - kprv=\377\302, krdo=\377\336, kref=\377\354, - kres=\377\360, krfr=\377\347, kri=\377\271, - krmir=\377\313, krpl=\377\362, krst=\377\352, - ksav=\377\361, kslt=\377\247, kspd=\377\335, - ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, - rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, - rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, - setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, - smso=\E(, smul=\E[, -# -# -qnxt|qnxt4|QNX4 terminal, - crxm, use=qnx4, -# -qnxm|QNX4 with mouse events, - maddr#1, - chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, - mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, - mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, - smicm=\E/>2h, use=qnx4, -# -qnxw|QNX4 windows, - xvpa, use=qnxm, -# -# Monochrome QNX4 terminal or console. Setting this terminal type will -# allow an application running on a color console to behave as if it -# were a monochrome terminal. Output will be through stdout instead of -# console writes because the term routines will recognize that the -# terminal name starts with 'qnxt'. +#### OpenBSD consoles # -qnxtmono|Monochrome QNX4 terminal or console, - colors@, pairs@, - scp@, use=qnx4, - -# From: Federico Bianchi , 1 Jul 1998 -# (esr: commented out and to avoid warnings.) -# (TD: derive from original qnx4 entry) -qnxt2|qnx 2.15 serial terminal, - am, - civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, - rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, - -# QNX ANSI terminal definition -qansi-g|QNX ANSI, - am, eslok, hs, xon, - colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, - el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, - fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, - ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, - ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, - is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, - kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, - kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, - kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, - kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, - kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, - kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, - kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, - kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, - kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, - kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, - kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, - kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, - kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, - kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, - kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, - kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, - khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, - kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, - kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, - kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, - ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, - rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, - rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, - smul=\E[4m, tbc=\E[2g, - tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, +# From: Alexei Malinin ; October, 2011. # -qansi|QNX ansi with console writes, - daisy, xhpa, use=qansi-g, +# The following terminal descriptions for the AMD/Intel PC console +# were prepared based on information contained in the OpenBSD-4.9 +# termtypes.master and wscons(4) & vga(4) manuals (2010, November). # -qansi-t|QNX ansi without console writes, - crxm, use=qansi, +# Added bce based on testing with tack -TD +# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD +# Changed kbs to DEL and removed keys that duplicate stty settings -TD # -qansi-m|QNX ansi with mouse, - maddr#1, - chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, - mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, - mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, - smicm=\E[>2h, use=qansi, +# Notes from testing with vttest: +# fails wrapping test +# no 8-bit controls +# identifies as vt200 with selective erase, but does not implement DECSCA +# no vt52 mode +# also lacks these: +# ESC # 8 DEC Screen Alignment Test (DECALN). +# CSI ? 5 h Reverse Video (DECSCNM). # -qansi-w|QNX ansi for windows, - xvpa, use=qansi-m, +pccon+keys|OpenBSD PC keyboard keys, + kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~, + kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~, + kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + krfr=^R, +pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console, + acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y + #z#{*|!}#~o, + sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m, + sgr0=\E[m, +pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, + enacs=\E)0$<5>, rmacs=\E(B$<5>, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e + \E(B%;$<2>, + sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>, +# underline renders as color +pccon+colors|ANSI colors for OpenBSD PC console, + bce, + colors#8, ncv#2, pairs#64, + op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, +pccon+base|base capabilities for OpenBSD PC console, + am, km, mc5i, msgr, npc, nxon, xenl, xon, + cols#80, it#8, lines#24, + bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l, + rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, + u7=\E[6n, +pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics, + use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys, +pccon0|OpenBSD PC console with simple ASCII pseudographics, + use=pccon0-m, use=pccon+colors, +pccon-m|OpenBSD PC console without colors, + use=pccon+base, use=pccon+sgr+acs, use=pccon+keys, +pccon|OpenBSD PC console, + use=pccon-m, use=pccon+colors, #### NetBSD consoles # @@ -1442,16 +1653,17 @@ qansi-w|QNX ansi for windows, pcvtXX|pcvt vt200 emulator (DEC VT220), am, km, mir, msgr, xenl, it#8, vt#3, - acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, - is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, + is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, @@ -1527,12 +1739,12 @@ arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), cols#80, it#8, lines#30, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, - enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, @@ -1541,7 +1753,8 @@ arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, use=klone+color, @@ -1550,7 +1763,7 @@ arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), cols#132, lines#50, use=arm100, # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine -# manufactured by Sharp for the Japenese market. +# manufactured by Sharp for the Japanese market. # From Minoura Makoto , 12 May 1996 x68k|x68k-ite|NetBSD/x68k ITE, cols#96, lines#32, @@ -1563,20 +1776,21 @@ x68k|x68k-ite|NetBSD/x68k ITE, ofcons|DNARD OpenFirmware console, bw, cols#80, lines#30, - bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, + bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r, cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, - il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, + il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, - kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, + kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m, rmso=\2330m, rmul=\2330m, - sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, - sgr0=\2330m, + sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8 + %;%?%p1%p3%|%t;7%;m, + sgr0=\2330m, smso=\2337m, smul=\2334m, # NetBSD "wscons" emulator in vt220 mode. # This entry is based on the NetBSD termcap entry, correcting the ncv value. @@ -1593,15 +1807,53 @@ ofcons|DNARD OpenFirmware console, wsvt25|NetBSD wscons in 25 line DEC VT220 mode, bce, msgr, colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, - is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, + civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H, + kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, - kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm, - setaf=\E[3%p1%dm, use=vt220, + kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220, wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, km, use=wsvt25, +# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD +# +# TERM is by default vt100 for the console, wsvt25 for other ttys. +# Initial testing set TERM=xterm, based on comments by developers, found too +# many differences to continue in that path. However, test-results may be +# useful to people curious about compatibility with xterm. +# +# Testing with tack: +# ----------------- +# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis +# There is color-bleeding in the color-pairs screen. +# Attributes do not work with color +# Failed: vpa/hpa +# Failed: kf1-kf4, kf13-kf48, khome, kend +# (effectively xterm-r6 for function-keys) +# None of the function or cursor key-modifiers are encoded. +# Console hangs in the smm/rmm test if TERM=xterm, does not show test +# +# Testing with vttest: +# ------------------- +# Identifies as vt220 with selective erase +# (however, selective erase refers to DECSCA, SPA) +# Does not implement vt52 +# Uses spaces to simulate double-size characters +# Does not support 8-bit controls +# Does not support VT220 reports +# Does not support send/receive mode +# Supports ECH (like rxvt) +# Does not support DECSCA +# Does not support any of the ISO-6429 cursor-movement +# Does not support any of the ISO-6429 miscellaneous tests +# (SL/SR also leave unexpected char on screen too) +# Background does not change in menu 11.6.9 (SGR 22-27) +# None of the xterm special features tests work +netbsd6|NetBSD wscons in 25 line DEC VT100 mode, + kbs=^?, use=wsvt25, + # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and # DECstation/pmax. rcons|BSD rasterconsole, @@ -1616,11 +1868,11 @@ rcons-color|BSD rasterconsole with ANSI color, # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} # -- the setf/setb are probably incorrect, more likely setaf/setab -TD # -- compare with cons25w -mgterm, +mgterm|MGL/MGL2 MobileGear Graphic Library, OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, colors#8, cols#80, it#8, lines#18, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, - cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, @@ -1628,7 +1880,7 @@ mgterm, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, @@ -1669,7 +1921,7 @@ cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), am, bce, bw, eo, msgr, npc, colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, - cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, + cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, @@ -1677,7 +1929,7 @@ cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, @@ -1691,11 +1943,16 @@ cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, + sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%? + %p6%t;1%;m, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), - acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, + acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l + \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~ + \371, use=cons25w, +cons25-debian|freebsd console with debian backspace (25-line ansi mode), + kbs=^?, kdch1=\E[3~, use=cons25, cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), colors@, pairs@, bold@, dim@, op@, rmul=\E[m, setab@, setaf@, @@ -1718,12 +1975,15 @@ cons60|ansi80x60|freebsd console (60-line ansi mode), cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), lines#60, use=cons25-m, cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, - acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, + acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m + \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~ + \225, use=cons25w, cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), colors@, pairs@, op@, rmul=\E[m, setab@, setaf@, - sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, + sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;30;1%;%?%p6%t;1%;m, smul=\E[4m, use=cons25r, cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), lines#50, use=cons25r, @@ -1735,7 +1995,9 @@ cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), lines#60, use=cons25r-m, # ISO 8859-1 FreeBSD console cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, - acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, + acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k + \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u + \226v\227w\230x\231y\232z\233~\237, use=cons25w, cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), colors@, pairs@, @@ -1751,6 +2013,53 @@ cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), lines#60, use=cons25l1-m, +# Starting with FreeBSD 8, an alternative configuration for syscons is provided, +# which is intended to be xterm-compatible. See for example +# http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/ +# in particular scterm-teken.c +# +# For FreeBSD 9 and 10: +# -------------------- +# The /etc/ttys entries for console and other ttys are all configured to set +# TERM=xterm. +# +# Testing with tack: +# There is no VT100 line-drawing (uses +'s and -'s) +# Shifted f1-f12 give cons25 codes, rather than xterm function-keys +# +# Testing with vttest: +# Menu 2 diamonds don't work, blink ditto, light background ditto +# The terminal identifies itself as VT100 with AVO +# There is no VT52 support +# There is no doublesize character support +# The terminal supports ECH (like rxvt) +# The terminal does not support send/receive mode +# The terminal supports all of the ISO-6429 cursor-movement +# The terminal supports some of the ISO-6429 miscellaneous tests +# (SL/SR also leave unexpected char on screen too) +# +# Considering cons25 as a base, the line-drawing mostly works, but is missing +# the cells which happen to have ASCII control-character values: +# - ^X arrow pointing up +# . ^Y arrow pointing down +# i ^Y lantern +# ` ^D diamond +# +# Those are removed from this entry's acsc string to avoid confusion. +# The resulting description provides correct line-drawing and function-keys -TD +teken|syscons with teken, + bw@, mir, xenl, + acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q + \304t\303u\264v\301w\302x\263y\363z\362~\371, + civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG, + hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l, + smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, + u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25, + #### 386BSD and BSD/OS Consoles # @@ -1760,7 +2069,8 @@ cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), origpc3|origibmpc3|IBM PC 386BSD Console, OTbs, am, bw, eo, xon, cols#80, lines#25, - acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x + \263, bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, @@ -1772,10 +2082,10 @@ origpc3|origibmpc3|IBM PC 386BSD Console, oldpc3|oldibmpc3|old IBM PC BSD/386 Console, OTbs, km, lines#25, - bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, - ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M, + ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, - knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, + knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R, # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 # Note, the emulator supports many of the additional console features @@ -1786,7 +2096,8 @@ oldpc3|oldibmpc3|old IBM PC BSD/386 Console, # (Color support from Kevin Rosenberg , 2 May 1996) # Bug: The capability resets attributes. bsdos-pc|IBM PC BSD/OS Console, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 + %t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold, bsdos-pc-nobold|BSD/OS PC console w/o bold, @@ -1795,14 +2106,15 @@ bsdos-pc-nobold|BSD/OS PC console w/o bold, bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, OTbs, am, eo, km, xon, cols#80, it#8, lines#25, - bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, - il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, + il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, - kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, - sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, + kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7, + sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7 + %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, use=klone+sgr8, # Old names for BSD/OS PC console used in releases before 4.1. @@ -1819,6 +2131,7 @@ bsdos-sparc|Sun SPARC BSD/OS Console, bsdos-ppc|PowerPC BSD/OS Console, use=bsdos-pc, + #### DEC VT52 # (// capabilities aren't in DEC's official entry -- esr) # @@ -1840,11 +2153,11 @@ bsdos-ppc|PowerPC BSD/OS Console, vt52|dec vt52, OTbs, cols#80, it#8, lines#24, - acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M, + acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, - el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, + el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF, #### DEC VT100 and compatibles # @@ -2013,7 +2326,7 @@ vt102+enq|ncurses extension for vt102-style ENQ, # | | | | | | | | # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz # | | | 1-On | | | 1-50 Hz -# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits +# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits # | | 1-ANSI | | 1-8 Bits # | Keyclick 0-Off | Parity 0-Off # | 1-On | 1-On @@ -2032,29 +2345,39 @@ vt102+enq|ncurses extension for vt102-style ENQ, # # (vt100: I added / based on the init string, also . -- esr) vt100|vt100-am|dec vt100 (w/advanced video), - OTbs, am, mc5i, msgr, xenl, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + OTbs, mc5i, xenl, xon, + vt#3, + csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, + mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l, + rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;$<2>, + smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, + use=vt100+4bsd, use=vt100+fnkeys, +vt100+4bsd|dec vt100 from 4.0BSD, + am, msgr, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, + clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, - enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, - lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, - rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, - rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, - sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, - smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, - use=vt100+fnkeys, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>, + rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;$<2>, + sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>, + smul=\E[4m$<2>, tbc=\E[3g, vt100nam|vt100-nam|vt100 no automargins, - am@, xenl@, use=vt100-am, + am@, xenl@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am, vt100-vb|dec vt100 (w/advanced video) & no beep, - bel@, flash=\E[?5h\E[?5l, use=vt100, + bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100, # Ordinary vt100 in 132 column ("wide") mode. vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), @@ -2123,13 +2446,13 @@ vt131|dec vt131, OTbs, am, xenl, cols#80, it#8, lines#24, vt#3, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, - clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^J, cuf1=\E[C$<2/>, + clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, + kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, @@ -2152,13 +2475,14 @@ vt132|DEC vt132, # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. # PF1--PF4 are used as F1--F4. # +# added msgr -TD vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, - OTbs, OTpt, am, mir, xenl, xon, + OTbs, OTpt, am, mir, msgr, xenl, xon, cols#80, lines#24, vt#3, - OTnl=^J, + OTnl=\n, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, - clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, + clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, @@ -2172,40 +2496,50 @@ vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, # A much better description of the VT200/220; used to be vt220-8 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 # designation to accommodate bug in pcvt -TD +# +# Here's a picture of the VT220 editing keypad: +# +--------+--------+--------+ +# | Find | Insert | Remove | +# +--------+--------+--------+ +# | Select | Prev | Next | +# +--------+--------+--------+ vt220|vt200|dec vt220, - OTbs, am, mc5i, mir, msgr, xenl, xon, + OTbs, am, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, ind=\ED, - is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, - kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, - kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, - kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, - lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, - mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, - rmul=\E[24m, rs1=\E[?3l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, + nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, + rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + rs1=\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, - smso=\E[7m, smul=\E[4m, tbc=\E[3g, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp, + use=ansi+enq, vt220-w|vt200-w|DEC vt220 in wide mode, cols#132, rs3=\E[?3h, use=vt220, @@ -2213,28 +2547,29 @@ vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, OTbs, am, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, + bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, - cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, + cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, if=/usr/share/tabset/vt100, il=\233%p1%dL, il1=\233L, ind=\ED, - is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, + is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, - kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, - kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, - kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, - kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, - kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, - knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, - lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, - nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B, - rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m, - rs1=\233?3l, sc=\E7, - sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~, + kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~, + kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~, + kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~, + kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H, + kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~, + kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, + mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM, + rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m, + rmul=\23324m, rs1=\233?3l, sc=\E7, + sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m + %?%p9%t\E(0%e\E(B%;$<2>, sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, smso=\2337m, smul=\2334m, tbc=\2333g, @@ -2270,16 +2605,18 @@ vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, # # From: Alexander Latzko , 30 Dec 1996 # (Added vt100 , to quiet a tic warning -- esr) +# added msgr -TD vt200-js|vt220-js|dec vt200 series with jump scroll, - am, + am, msgr, cols#80, - bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, - dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, - il1=\E[L, ind=\ED, - is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, + bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, + ht=^I, il1=\E[L, ind=\ED, + is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[ + ?25h\E>\E[m, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8, rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, @@ -2309,52 +2646,48 @@ vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, # From: Adam Thompson Sept 10 1995 # (vt320: uncommented --esr) vt320|vt300|dec vt320 7 bit terminal, - am, eslok, hs, mir, msgr, xenl, + am, hs, mir, msgr, xenl, cols#80, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, - home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, - il1=\E[L, ind=\ED, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, - kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, - mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, + kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[1$}\E[H\E[K, use=vt220+keypad, + use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq, vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, am@, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, - use=vt320, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320, # We have to init 132-col mode, not 80-col mode. vt320-w|vt300-w|dec vt320 wide 7 bit terminal, cols#132, wsl#132, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - use=vt320, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320, vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, am@, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, - use=vt320-w, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w, # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals # which are pretty much a superset of the VT320. They have the @@ -2381,23 +2714,25 @@ vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, - cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, - ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, + ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, - is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r + \E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, - lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, @@ -2428,53 +2763,61 @@ vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, + clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, - el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, + el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, - is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r + \E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, - lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[2$~\E[1$}\E[1;%dH, + tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, # (vt420: I removed , it collided with . I also restored # a missing -- esr) +# add msgr and other capabilities from vt220 -TD vt420|DEC VT420, - am, mir, xenl, xon, - cols#80, lines#24, vt#3, + am, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, - dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, - if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, - kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, - rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, - rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, + clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K, + enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300, + il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, + is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, + kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, + kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE, + rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, - sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, - smkx=\E=, smso=\E[7m, smul=\E[4m, + rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;$<2>, + sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h, + smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + use=ansi+pp, use=dec+sl, use=ansi+enq, # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) # takes two parameters, the key and the string. Translating the key is @@ -2493,33 +2836,35 @@ vt420|DEC VT420, # application has to know it. # vt420pc|DEC VT420 w/PC keyboard, - kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, - kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, - kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, - kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, - kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, - kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, - kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, - kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, - kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, - kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, - kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, - kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[H, + kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, + kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~, + kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~, + kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~, + kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~, + kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~, + kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~, + kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~, + kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~, + kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~, + kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, pctrm=USR_TERM\:vt420pcdos\:, - pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%> + %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+ + %d/%p2%s\E\\, use=vt420, vt420pcdos|DEC VT420 w/PC for DOS Merge, lines#25, - dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, + dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1 + %{127}%=%t\E\177%e%p1%c%;, pctrm@, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, - kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, @@ -2547,61 +2892,24 @@ vt510pcdos|DEC VT510 w/PC for DOS Merge, # terminal mode is being used. If Set-Up has been disabled or # assigned to an unknown key, Set-Up may be entered by pressing # [F3] as the first key after power up, regardless of keyboard type. -# (vt520: I added / based on the init string, also -- esr) vt520|DEC VT520, - am, mir, xenl, xon, - cols#80, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, - dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, - if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, - kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, - pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, - rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, - ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, - rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, - sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, - smso=\E[7m, smul=\E[4m, + use=ansi+rca, use=vt420, use=ansi+tabs, -# (vt525: I added / based on the init string; -# removed =\E[m, =\E[m, added -- esr) vt525|DEC VT525, - am, mir, xenl, xon, - cols#80, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, - dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, - if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, - is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, - kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, - pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, - rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, - ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, - rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, - sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, - smso=\E[7m, smul=\E[4m, + use=vt520, -#### VT100 emulations +# I just got a brand new Boundless VT520 with that company's "ANSI 2011" +# Keyboard, which replaces the old LK41R-AA keyboard. # +# In trying to get the function keys to work, I had to cobble my own +# terminfo.src entry, since the existing vt520 entry doesn't include most of +# the function keys. If I blend the entries for "vt420f" and "vt220+keypad" +# I seem to get them all -Mike Gran +vt520ansi|Boundless VT520 ANSI, + use=ansi+rca, use=vt420f, use=vt220+keypad, + use=ansi+tabs, + +#### VT100 emulations # John Hawkinson tells us that the EWAN telnet for Windows # (the best Windows telnet as of September 1995) presents the name `dec-vt100' @@ -2624,14236 +2932,16784 @@ dec-vt220|DOS tnvt200 terminal emulator, z340|zstem vt340 terminal emulator 132col 42line, lines#42, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, - use=vt320-w, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w, z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), am@, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, - use=z340, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340, -# CRT is shareware. It implements some xterm features, including mouse. -crt|crt-vt220|CRT 2.3 emulating VT220, - bce, msgr, - ncv@, - hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, +# expect-5.44.1.15/example/tkterm +# a minimal subset of a vt100 (compare with "news-unk). +# +# The missing "=" in smkx is not a typo (here), but an error in tkterm. +tt|tkterm|Don Libes' tk text widget terminal emulator, + clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, + kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, + smso=\E[7m, -# PuTTY 0.55 (released 3 August 2004) -# http://www.chiark.greenend.org.uk/~sgtatham/putty/ +######## APPLE + +#### Terminal.app + +# nsterm*|Apple_Terminal - AppKit Terminal.app # -# Comparing with 0.51, vttest is much better (only a few problems with the -# cursor position reports and wrapping). +# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and +# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X +# Server and Mac OS X operating systems. There is also a +# "terminal.app" in GNUstep, but I believe it to be an unrelated +# codebase and I have not attempted to describe it here. # -# PuTTY 0.51 (released 14 December 2000) +# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you +# are pretty much on your own. Use "nsterm-7-m" and hope for the best. +# You might also try "nsterm-7" and "nsterm-old" if you suspect your +# version supports color. # -# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as -# well as SCO and Atari, color palettes from Linux console). Reading the code, -# it is intended to be VT102 plus selected features. By default, it sets $TERM -# to xterm, which is incorrect, since several features are misimplemented: +# To determine the version of Terminal.app you're using by running: # -# Alt+key always sends ESC+key, so 'km' capability is removed. +# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION" # -# Control responses, wrapping and tabs are buggy, failing a couple of -# screens in vttest. +# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce") # -# xterm mouse support is not implemented (unrelease version may). +# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm") # -# Several features such as backspace/delete are optional; this entry documents -# the default behavior -TD +# For Apple_Terminal v71+/v100+, use "nsterm-bce". +# +# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s". +# +# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s". +# +# For all earlier versions (Apple_Terminal), try "nsterm-7-m" +# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s" +# might work too, but really you're on your own here since these +# systems are very obsolete and I can't test them. I do welcome +# patches, though :). -putty|PuTTY terminal emulator, - am, bce, bw, ccc, hs, mir, msgr, xenl, xon, - colors#8, it#8, ncv#22, pairs#64, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, - dch=\E[%p1%dP, dch1=\E[P, - dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, - dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX, - ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, - flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, - ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, - indn=\E[%p1%dS, - initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, - is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, - kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, - kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, - kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, - kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, - ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, - rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, - rmso=\E[27m, rmul=\E[24m, - rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, - s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, - smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq, -vt100-putty|Reset PuTTY to pure vt100, - rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, - use=vt100, -# palette is hardcoded... -putty-256color|PuTTY 0.58 with xterm 256-colors, - initc@, use=xterm+256color, use=putty, +# Other Terminals: +# +# For GNUstep_Terminal, you're probably best off using "linux" or +# writing your own terminfo. -# One of the keyboard selections is "VT100+". -# pterm (the X11 port) uses shifted F1-F10 as F11-F20 -putty-vt100|VT100+ keyboard layout, - kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, - kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, - kf9=\EOX, use=putty, +# For MacTelnet, you're on your own. It's a different codebase, and +# seems to be somewhere between "vt102", "ncsa" and "xterm-color". + +# For iTerm.app, see "iterm". -# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by -# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator -# (communication program) which supports: -# -# - Serial port connections. -# - TCP/IP (telnet) connections. -# - VT100 emulation, and selected VT200/300 emulation. -# - TEK4010 emulation. -# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and -# Quick-VAN). -# - Scripts using the "Tera Term Language". -# - Japanese and Russian character sets. # -# The program does not come with terminfo or termcap entries. However, the -# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no -# vt52 or doublesize character support; blinking is done with color). Besides -# the HPA, VPA extensions it also implements CPL and CNL. +# The AppKit Terminal.app descriptions all have names beginning with +# "nsterm". Note that the statusline (-s) versions use the window +# titlebar as a phony status line, and may produce warnings during +# compilation as a result ("tsl uses 0 parameters, expected 1".) +# Ignore these warnings, or even ignore these entries entirely. Apps +# which need to position the cursor or do other fancy stuff inside the +# status line won't work with these entries. They're primarily useful +# for programs like Pine which provide simple notifications in the +# status line. Please note that non-ASCII characters don't work right +# in the status line, since Terminal.app incorrectly interprets their +# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X +# versions) or only accepts status lines consisting entirely of +# characters from the first 256 Unicode positions (including C1 but +# not C0 or DEL.) +# +# The Mythology* of AppKit Terminal.app: +# +# In the days of NeXTSTEP 0.x and 1.x there were two incompatible +# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a +# shareware replacement for Terminal called "Stuart" which NeXT bought +# and used as the basis for the Terminal.app in NeXTSTEP 2+, +# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I +# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or +# capabilities for the early versions, but I believe that the +# TERM_PROGRAM_VERSION may have been reset at some point. +# +# The early versions were tailored to the NeXT character set. Sometime +# after the Apple acquisition the encoding was switched to MacRoman +# (initially with serious altcharset bugs due to incomplete conversion +# of the old NeXT code,) and then later to UTF-8. Also sometime during +# or just prior to the early days of Mac OS X, the Terminal grew ANSI +# 8-color support (initially buggy when combined with attributes, but +# that was later fixed.) More recently, around Mac OS X version 10.3 +# or so (Terminal.app v100+) xterm-like 16-color support was added. In +# some versions (for instance 133-1 which shipped with Mac OS X +# version 10.4) this suffered from the bug, but that seems to +# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+). +# +# In the early days of Mac OS X the terminal was fairly buggy and +# would routinely crash under load. Many of these bugs seem to have +# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but +# some may still remain. This change seems to correspond to +# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as +# it did previously. +# +# * This may correspond with what actually happened, but I don't +# know. It is based on guesswork, hearsay, private correspondence, +# my faulty memory, and the following online sources and references: +# +# [1] "Three Scotts and a Duane" by Simson L. Garfinkel +# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html +# +# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia +# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep # -# All of the function keys can be remapped. This description shows the default -# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys -# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad -# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, -# kfnd Insert -# kslt Delete -# kich1 Home -# kdch1 PageUp -# kpp End -# knp PageDown +# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to +# "nsterm" to comply with the name length and case conventions and +# limitations of various software packages [notably Solaris terminfo +# and UNIX.] A single Apple_Terminal alias is retained for +# backwards-compatibility. # -# ANSI colors are implemented, but cannot be combined with video attributes -# except for reverse. +# * Added function key support (F1-F4). These only work in Terminal.app +# version 51, hopefully the capabilities won't cause problems for people +# using version 41. # -# No fonts are supplied with the program, so the acsc string is chosen to -# correspond with the default Microsoft terminal font. +# * Added "full color" (-c) entries which support the 16-color mode in +# version 51. # -# Tera Term recognizes some xterm sequences, including those for setting and -# retrieving the window title, and for setting the window size (i.e., using -# "resize -s"), though it does not pass SIGWINCH to the application if the -# user resizes the window with the mouse. -teraterm|Tera Term Pro, - km, xon@, - ncv#43, vt@, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, - cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, - flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, - il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, - kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, - kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, - kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, - rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, - smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, - use=klone+color, use=vt100, +# * By default, version 51 uses UTF-8 encoding with broken altcharset +# support, so "ASCII" (-7) entries without altcharset support were +# added. -# Tested with WinNT 4.0, the telnet application assumes the screensize is -# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. +# nsterm - AppKit Terminal.app # -# Other notes: -# a) Fails tack's cup (cursor-addressing) test, though cup works well enough -# for casual (occasional) use. Also fails several of the vttest screens, -# but that is not unusual for vt100 "emulators". -# b) Does not implement vt100 keypad -# c) Recognizes a subset of vt52 controls. -ms-vt100|MS telnet imitating dec vt100, - lines#25, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, - kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, - -# Tested with Windows 2000, the telnet application runs in a console window, -# also using 'Terminal' font. +# Apple's Mac OS X includes a Terminal.app derived from the old NeXT +# Terminal.app. It is a partial VT100 emulation with some xterm-like +# extensions. This terminfo was written to describe versions 41 +# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X +# version 10.1) of Terminal.app. # -# Other notes: -# a) This version has no function keys or numeric keypad. Unlike the older -# version, the numeric keypad is entirely ignored. -# b) The program sets $TERM to "ansi", which of course is inaccurate. -ms-vt100-color|vtnt|windows 2000 ansi (sic), - bce, - dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, - use=ms-vt100, - -# Based on comments from Federico Bianchi: +# Terminal.app runs under the Mac OS X Quartz windowing system (and +# other AppKit-supported windowing systems.) On the Mac OS X machine I +# use, the executable for Terminal.app is: +# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal # -# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different -# scheme for PF keys. +# If you're looking for a description of the full-screen system +# console which runs under Apple's Darwin operating system on PowerPC +# platforms, see the "xnuppc" entry instead. # -# and PuTTY wishlist: +# There were no function keys in version 41. In version 51, there are +# four working function keys (F1, F2, F3 and F4.) The function keys +# are included in all of these entries. # -# The modifiers are represented as the codes listed above, prefixed to -# the normal sequences. If the modifier is pressed alone, its sequence -# is transmitted twice in succession. If multiple modifiers apply, -# they're transmitted in the order shift, control, alt. +# It does not support mouse pointer position reporting. Under some +# circumstances the cursor can be positioned using option-click; this +# works by comparing the cursor position and the selected position, +# and simulating enough cursor-key presses to move the cursor to the +# selected position. This technique fails in all but the simplest +# applications. # -# Shift \E^S -# Alt \E^A, -# Ctrl \E^C, -ms-vt100+|vt100+|windows XP vt100+ (sic), - kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, - kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, - kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, - kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, - kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, - kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, - kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, - kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, - kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, - kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, - kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, - kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, - kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, - kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, - knp=\E/, kpp=\E?, use=ms-vt100-color, - -ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, - use=ms-vt100+, - -# a minimal subset of a vt100 (compare with "news-unk). -tt|tkterm|Don Libes' tk text widget terminal emulator, - clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, - cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m, - smso=\E[7m, - -#### X terminal emulators +# It provides partial ANSI color support (background colors interacted +# badly with bold in version 41, though, as reflected in :ncv:.) The +# monochrome (-m) entries are useful if you've disabled color support +# or use a monochrome monitor. The full color (-c) entries are useful +# in version 51, which doesn't exhibit the background color bug. They +# also enable an xterm-compatible 16-color mode. # -# You can add the following line to your .Xdefaults to change the terminal type -# set by the xterms you start up to my-xterm: +# The configurable titlebar is set using xterm-compatible sequences; +# it is used as a status bar in the statusline (-s) entries. Its width +# depends on font sizes and window sizes, but 50 characters seems to +# be the default for an 80x24 window. # -# *termName: my-xterm +# The MacRoman character encoding is used for some of the alternate +# characters in the "MacRoman" entries; the "ASCII" (-7) entries +# disable alternate character set support entirely, and the "VT100" +# (-acs) entries rely instead on Terminal.app's own buggy VT100 +# graphics emulation, which seems to think the character encoding is +# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries +# are useful in Terminal.app version 51, which supports UTF-8 and +# other ASCII-compatible character encodings but does not correctly +# implement VT100 graphics; once VT100 graphics are correctly +# implemented in Terminal.app, the "VT100" (-acs) entries should be +# usable in any ASCII-compatible character encoding [except perhaps +# in UTF-8, where some experts argue for disallowing alternate +# characters entirely.] # -# System administrators can change the default entry for xterm instances -# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either -# case, xterm will detect and reject an invalid terminal type, falling back -# to the default of xterm. +# Terminal.app reports "vt100" as the terminal type, but exports +# several environment variables which may aid detection in a shell +# profile (i.e. .profile or .login): +# +# TERM=vt100 +# TERM_PROGRAM=Apple_Terminal +# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 +# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 +# +# For example, the following Bourne shell script would detect the +# correct terminal type: +# +# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] +# then +# export TERM +# if [ :"$TERM_PROGRAM_VERSION" = :41 ] +# then +# TERM="nsterm-old" +# else +# TERM="nsterm-c-7" +# fi +# fi # +# In a C shell derivative, this would be accomplished by: +# +# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then +# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then +# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then +# setenv TERM "nsterm-old" +# else +# setenv TERM "nsterm-c-7" +# endif +# endif +# endif -# X10/6.6 11/7/86, minus alternate screen, plus (csr) -# (xterm: ":MT:" changed to ":km:"; added / based on init string; -# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) -# as these seem not to work -- esr) -x10term|vs100-x10|xterm terminal emulator (X10 window system), - OTbs, am, km, mir, msgr, xenl, xon, - cols#80, it#8, lines#65, - bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, - il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, - rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, - smso=\E[7m, smul=\E[4m, -# Compatible with the R5 xterm -# (from the XFree86 3.2 distribution, removed) -# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD -# corrected typos in rs2 string - TD -# added u6-u9 -TD -xterm-r5|xterm R5 version, - OTbs, am, km, msgr, xenl, - cols#80, it#8, lines#24, - bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, - kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, - kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, - kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, - rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, - rmul=\E[m, - rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, - sc=\E7, - sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, - sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, use=vt100+enq, -# Compatible with the R6 xterm -# (from XFree86 3.2 distribution, and added, removed) -# added khome/kend, hts based on the R6 xterm code - TD -# (khome/kend do not actually work in X11R5 or X11R6, but many people use this -# for compatibility with other emulators). -xterm-r6|xterm-old|xterm X11R6 version, - OTbs, am, km, mir, msgr, xenl, +# The '+' entries are building blocks +nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, + am, bw, msgr, xenl, xon, cols#80, it#8, lines#24, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, - il1=\E[L, ind=^J, - is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, - kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, - kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, - rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, - rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, - sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, - smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - use=vt100+enq, -# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. -# The name has been changed and some aliases have been removed. -xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), - OTbs, am, bce, km, mir, msgr, xenl, - cols#80, it#8, lines#24, ncv@, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, - flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, - ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, - il1=\E[L, ind=^J, - is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, - kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, - kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, - kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, - kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, - kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, - kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, - kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, - memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, - rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, - rmso=\E[27m, rmul=\E[24m, rs1=^O, - rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, - smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, - use=ecma+color, use=vt220+keypad, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, + ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, + rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m, + sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, -# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 -# codes for F1-F4 except while in VT220 mode. -xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, +nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + enacs=\E(B\E)0, rmacs=^O, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, use=nsterm+7, -# This version was released in XFree86 3.3.3 (November 1998). -# Besides providing printer support, it exploits a new feature that allows -# xterm to use terminfo-based descriptions with the titeInhibit resource. -# -- the distribution contained incorrect khome/kend values -TD -xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), - mc5i, - blink=\E[5m, ich1@, invis=\E[8m, - is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, - mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, - rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, +nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, + acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i + \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{ + \271|\255}\243~\245, + enacs=\E(B\E)0, rmacs=^O, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, use=nsterm+7, -# This version was released in XFree86 4.0. -xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), - npc, - kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, - kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, - ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, - kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, - kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, - kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, - kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, - kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, - kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, - kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, - kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, - kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, - kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, - kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - smcup=\E[?1049h, use=xterm-xf86-v333, +# compare with xterm+sl-twm +nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, + wsl#50, use=xterm+sl-twm, -# This version was released in XFree86 4.3. -xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), - kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, - kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, - kbeg@, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - use=xterm-xf86-v40, +nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), + op=\E[0m, use=ibm+16color, -# This version was released in XFree86 4.4. -xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), - cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, - rin=\E[%p1%dT, use=xterm-xf86-v43, +nsterm+c41|AppKit Terminal.app v41 color support, + colors#8, ncv#37, pairs#64, + op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, -# This is the most common alias for xterm-new. -xterm-xfree86|xterm terminal emulator (XFree86), - use=xterm-new, -# use=xterm-old, +# These are different combinations of the building blocks -# This version reflects the current xterm features. -xterm-new|modern xterm terminal emulator, - npc, - indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, - kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, - kRIT=\E[1;2C, kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, kent=\EOM, khome=\EOH, - kich1=\E[2~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~, - kpp=\E[5~, kri=\E[1;2A, rin=\E[%p1%dT, use=xterm+pcfkeys, - use=xterm-basic, -# -# This fragment describes as much of XFree86 xterm's "pc-style" function -# keys as will fit into terminfo's 60 function keys. -# From ctlseqs.ms: -# Code Modifiers -# --------------------------------- -# 2 Shift -# 3 Alt -# 4 Shift + Alt -# 5 Control -# 6 Shift + Control -# 7 Alt + Control -# 8 Shift + Alt + Control -# --------------------------------- -# The meta key may also be used as a modifier in this scheme, adding another -# bit to the parameter. -xterm+pcfkeys|fragment for PC-style fkeys, - use=xterm+pcf2, use=xterm+pcc2, -# -# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) -# and revised in patch #167 (2002/8/24). Some other terminal emulators copied -# the earlier scheme, as noted in the "use=" clauses in this file. -# -# The original assignments from patch #94 for cursor-keys had some technical -# issues: -# -# A parameter for a function-key to represent a modifier is just more -# bits. But for a cursor-key it may change the behavior of the -# application. For instance, emacs decodes the first parameter of a -# cursor-key as a repeat count. -# -# A parameterized string should (really) not begin with SS3 (\EO). -# Rather, CSI (\E[) should be used. -# -# For these reasons, the original assignments were deprecated. For -# compatibility reasons, they are still available as a setting of xterm's -# modifyCursorKeys resource. These fragments list the modified cursor-keys -# that might apply to xterm+pcfkeys with different values of that resource. -xterm+pcc3|fragment with modifyCursorKeys:3, - kDN=\E[>1;2B, kDN5=\E[>1;5B, kDN6=\E[>1;6B, - kLFT5=\E[>1;5D, kLFT6=\E[>1;6D, kRIT5=\E[>1;5C, - kRIT6=\E[>1;6C, kUP=\E[>1;2A, kUP5=\E[>1;5A, - kUP6=\E[>1;6A, +# ASCII charset (-7) +nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), + use=nsterm+7, -xterm+pcc2|fragment with modifyCursorKeys:2, - kDN=\E[1;2B, kDN5=\E[1;5B, kDN6=\E[1;6B, kLFT5=\E[1;5D, - kLFT6=\E[1;6D, kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP=\E[1;2A, - kUP5=\E[1;5A, kUP6=\E[1;6A, +nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), + use=nsterm+s, use=nsterm+7, -xterm+pcc1|fragment with modifyCursorKeys:1, - kDN=\E[2B, kDN5=\E[5B, kDN6=\E[6B, kLFT5=\E[5D, - kLFT6=\E[6D, kRIT5=\E[5C, kRIT6=\E[6C, kUP=\E[2A, - kUP5=\E[5A, kUP6=\E[6A, +nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), + use=nsterm+c41, use=nsterm+7, -xterm+pcc0|fragment with modifyCursorKeys:0, - kDN=\EO2B, kDN5=\EO5B, kDN6=\EO6B, kLFT5=\EO5D, - kLFT6=\EO6D, kRIT5=\EO5C, kRIT6=\EO6C, kUP=\EO2A, - kUP5=\EO5A, kUP6=\EO6A, -# -# Here are corresponding fragments from xterm patch #216: -# -xterm+pcf0|fragment with modifyFunctionKeys:0, - kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, - kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, - kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, - kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, - kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, - kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, - kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, - kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, - kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, - kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, - kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, - kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, - kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, - kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, - kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, - kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, -# -xterm+pcf2|fragment with modifyFunctionKeys:2, - kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, - kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, - kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, - kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, - kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, - kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, - kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, - kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, - kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, - kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, - kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, - kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, - kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, - kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, - kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, - kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, -# -# This chunk is used for building the VT220/Sun/PC keyboard variants. -xterm-basic|modern xterm terminal emulator - common, - OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, - colors#8, cols#80, it#8, lines#24, pairs#64, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, - flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, - ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, - ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H, - kdch1=\E[3~, kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, - meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, - rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, - rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, - sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, - smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, +nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), + use=nsterm+c, use=nsterm+7, -# From: David J. MacKenzie , 14 Nov 1997 -# In retrospect, something like xterm-r6 was intended here -TD -xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, - rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, +nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), + use=nsterm+s, use=nsterm+c41, use=nsterm+7, -# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) -xterm-16color|xterm with 16 colors like aixterm, - use=ibm+16color, use=xterm-new, +nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), + use=nsterm+s, use=nsterm+c, use=nsterm+7, -# This is a compile-time feature of XFree86 xterm beginning with -# patch #111 (1999/7/10) -TD -xterm+256color|xterm 256-color feature, - ccc, - colors#256, pairs#32767, - initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, - setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, - setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, - setb@, setf@, +# VT100 alternate-charset (-acs) +nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), + use=nsterm+acs, -# This is a compile-time feature of XFree86 xterm beginning with -# patch #115 (1999/9/18) -TD -# -# Note that the escape sequences used are the same as for 256-colors - xterm -# has a different table of default color resource values. If built for -# 256-colors, it can still handle an 88-color palette by using the initc -# capability. -# -# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals -# which support the xterm+256color feature support the associated initc -# capability. So it is cancelled in the entries which use this and/or the -# xterm+256color block. -xterm+88color|xterm 88-color feature, - colors#88, pairs#7744, use=xterm+256color, +nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), + use=nsterm+s, use=nsterm+acs, -# These variants of XFree86 3.9.16 xterm are built as a configure option. -xterm-256color|xterm with 256 colors, - use=xterm+256color, use=xterm-new, -xterm-88color|xterm with 88 colors, - use=xterm+88color, use=xterm-256color, +nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), + use=nsterm+c41, use=nsterm+acs, -# These two are used to demonstrate the any-event mouse support, i.e., by -# using an extended name "XM" which tells ncurses to put the terminal into -# a special mode when initializing the xterm mouse. -xterm-1002|testing xterm-mouse, - XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, -xterm-1003|testing xterm-mouse, - XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, +nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), + use=nsterm+c, use=nsterm+acs, -# This is another variant, for XFree86 4.0 xterm (T.Dickey) -# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. -# To use it, your decTerminalID resource must be set to 200 or above. -# -# HTS \E H \210 -# RI \E M \215 -# SS3 \E O \217 -# CSI \E [ \233 -# -xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), - OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, - colors#8, cols#80, it#8, lines#24, pairs#64, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, - civis=\233?25l, clear=\233H\2332J, - cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, - cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, - cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, - cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, - dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, - ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, - flash=\233?5h$<100/>\233?5l, home=\233H, - hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, - il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, - is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, - ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, - kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, - kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, - kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, - kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, - kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, - kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, - kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, - kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, - knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, - meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, - ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, - rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, - rs1=\Ec, - rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, - sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, - setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, - smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, - smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, - u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, +nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), + use=nsterm+s, use=nsterm+c41, use=nsterm+acs, -xterm-hp|xterm with hpterm function keys, - kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, - kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, - kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, - knp=\ES, kpp=\ET, use=xterm-basic, +nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), + use=nsterm+s, use=nsterm+c, use=nsterm+acs, -xterm-sco|xterm with SCO function keys, - kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, - kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, - kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, - kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, - kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, - kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, - kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, - kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, - kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, - kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, - kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, - use=xterm-basic, +# MacRoman charset +nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), + use=nsterm+mac, -# The xterm-new description has all of the features, but is not completely -# compatible with vt220. If you are using a Sun or PC keyboard, set the -# sunKeyboard resource to true: -# + maps the editing keypad -# + interprets control-function-key as a second array of keys, so a -# 12-fkey keyboard can support vt220's 20-fkeys. -# + maps numeric keypad "+" to ",". -# + uses DEC-style control sequences for the application keypad. -# -xterm-vt220|xterm emulating vt220, - kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, - kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - use=xterm-basic, use=vt220+keypad, +nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), + use=nsterm+s, use=nsterm+mac, -xterm-vt52|xterm emulating dec vt52, - cols#80, it#8, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, - cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, - home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, +nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color), + use=nsterm+c41, use=nsterm+mac, -xterm-noapp|xterm with cursor keys in normal mode, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@, - rmkx=\E>, smcup@, smkx=\E=, use=xterm, +nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), + use=nsterm+c, use=nsterm+mac, -xterm-24|vs100|xterms|xterm terminal emulator (X Window System), - lines#24, use=xterm, +nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), + use=nsterm+s, use=nsterm+c41, use=nsterm+mac, -# This is xterm for ncurses. -xterm|xterm terminal emulator (X Window System), - use=xterm-new, +nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), + use=nsterm+s, use=nsterm+c, use=nsterm+mac, -# These entries allow access to the X titlebar and icon name as a status line. -# Note that twm (and possibly window managers descended from it such as tvtwm, -# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess -# with it. -xterm+sl|access X title line and icon name, - hs, - wsl#40, - dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, -xterm+sl-twm|access X title line (pacify twm-descended window managers), - hs, - wsl#40, - dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, +# In Mac OS X version 10.5 the format of the preferences has changed +# and a new, more complex technique is needed, e.g., +# +# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass( +# "NSUserDefaults");ud=NSUserDefaults.alloc(); +# ud.init();prefs=ud.persistentDomainForName_( +# "com.apple.Terminal");prefs["Window Settings"][ +# prefs["Default Window Settings"]]["TerminalType" +# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs, +# "com.apple.Terminal")' nsterm-16color +# +# and it is still not settable from the preferences dialog. This is +# tracked under rdar://problem/7365108 and rdar://problem/7365134 +# in Apple's bug reporter. +# +# In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog +# defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt, +# vt52, vt100, vt102 and xterm. +nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5, + bw@, mir, npc, + civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, + flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, + ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, + knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, + smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd, + kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs, +# The versions of Terminal.app in Mac OS X version 10.3.x seem to have +# the background color erase feature. The newer version 240.2 in Mac OS X +# version 10.5 does not. # -# The following xterm variants don't depend on your base version +# This entry is based on newsgroup comments by Alain Bench, Christian Ebert, +# and D P Schreber comparing to nsterm-c-s-acs. # -# xterm with bold instead of underline -xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, - smso=\E[7m, smul=\E[1m, use=xterm, -# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) -# (kterm should not invoke DEC Graphics as the alternate character set -# -- Kenji Rikitake) -# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics -# -- MATSUMOTO Shoji) -# kterm implements acsc via built-in table of X Drawable's -kterm|kterm kanji terminal emulator (X window system), - eslok, hs, - ncv@, - acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, - csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, - kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, - tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, -kterm-color|kterm-co|kterm with ANSI colors, - ncv@, use=kterm, use=ecma+color, -# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file -xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, - ich@, ich1@, use=xterm, -# From: Mark Sheppard , 4 May 1996 -xterm1|xterm terminal emulator ignoring the alternate screen buffer, - rmcup@, smcup@, use=xterm, - -# This describes the capabilities of color_xterm, an xterm variant from -# before ECMA-64 color support was folded into the main-line xterm release. -# This entry is straight from color_xterm's maintainer. -# From: Jacob Mandelson , 09 Nov 1996 -# The README's with the distribution also say that it supports SGR 21, 24, 25 -# and 27, but they are not present in the terminfo or termcap. -color_xterm|cx|cx100|color_xterm color terminal emulator for X, - OTbs, am, km, mir, msgr, xenl, - cols#80, it#8, lines#65, ncv@, +# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM +# can be set in Terminal.app, e.g., +# +# defaults write com.apple.Terminal TermCapString nsterm-bce +# +# and that it is not set in Terminal's preferences dialog. +# +# Modified for OS X 10.8, omitting bw based on testing with tack -TD +# +# Notes: +# * The terminal description matches the default settings. +# * The keyboard is configurable via a dialog. +# * By default khome, kend, knext and kprev are honored only with a +# shift-modifier. +# * There are bindings for control left/right arrow (but not up/down). +# Added those to nsterm-16color, which is the version used for OS X 10.6 +# * "Allow VT100 application keypage mode" is by default disabled. +# There is no way to press keypad-comma unless application mode is enabled +# and used. +# * 132-column mode stopped working during vttest's tests. Consider it broken. +# * CHT, REP, SU, SD are buggy. +# * ECH works (also in Leopard), but is not used here for compatibility. +# * The terminal preferences dialog replaces xterm-color by xterm-16color and +# xterm-256color. However, it adds "nsterm", so it is possible to use the +# nsterm entry from this file to override the MacPorts (20110404) or +# system (20081102) copy of this file. +# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences +# dialog defaults to xterm-256color. Alternative selections are ansi, +# dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However, +# the menu says "Declare terminal as" without promising to actually emulate +# the corresponding terminals. Indeed, changing TERM does not affect the +# emulation itself. This means that +# + the function-keys do not match for dtterm for kf1-kf4 as well as +# khome/kend +# + the color model is the same for each setting of TERM (does not match +# ansi or dtterm). +# + the shift/control/meta key modifiers from rxvt and xterm variants are not +# recognised except for a few special cases, i.e., kRIT5 and kLFT5. +# + the vt52 emulation does not give a usable shell because screen-clearing +# does not work as expected. +# + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color". +# + OSX 10.9 (Yosemite) added more extended keys in the default configuration +# as well as unmasking F10 (which had been used in the window manager). Those +# keys are listed in this entry. +nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce), + bce, use=nsterm-16color, + +# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11 +# TERM_PROGRAM_VERSION=309 +# Earlier reports state that these differences also apply to OS X 10.7 (Leopard), +# TERM_PROGRAM_VERSION=303 +nsterm-build309|Terminal.app in OS X 10.8, + use=xterm+256setaf, use=nsterm-bce, + +# removed bogus kDC7 -TD +nsterm-build326|Terminal.app in OS X 10.9, + kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z, + kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D, + kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309, + +# actually "343.7" +nsterm-build343|Terminal.app in OS X 10.10, + kend=\EOF, khome=\EOH, use=nsterm-build326, + +# reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD +# Using vttest: +# + no vt52 mode for cursor keys, though vt52 screen works in vttest +# + f1-f4 map to pf1-pf4 +# + no vt220 support aside from DECTCEM and ECH +# + there are no protected areas. Forget about anything above vt220. +# + in ECMA-48 cursor movement, VPR and HPR fail. Others work. +# + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce +# + but bce fails for 11.6.7.2 (test repeat). +# + SD (11.6.7.3) also fails, but SL/SR/SU work. +# + 11.6.6 (test insert/delete char/line with bce) has several failures. +# + normal (not X10 or Highlight tracking) mouse now works. +# + mouse any-event works +# + mouse button-event works +# + in alternate screen: +# mode 47/48 work +# mode 1047 fails to restore cursor position (do not use) +# mode 1049 fails to restore screen contents (do not use) +# + dtterm window-modify operations work (some messages are not printed) +# + dtterm window-report gives size of window in characters/pixels as +# well as state of window. +# Using tack: +# + there is no difference between cnorm/cvvis +# + has dim/invis/blink (no protect of course) +# + most function keys with shift/control modifiers give beep +# (user can configure, but out-of-the-box is what I record) +# + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between +# F8 and F9). +# + kLFT5/kRIT5 work, but not up/down with control-modifier +# + kLFT/kRIT work, but not up/down with shift-modifier +# + there are a few predefined bindings with Alt, but no clear pattern. +# + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape +# Using ncurses test-program with xterm-new: +# + no italics +# Using xterm's scripts: +# + palette for 256-colors is hardcoded. +# + no support for "dynamic colors" +# + no support for tcap-query. +nsterm-build361|Terminal.app in OS X 10.11, + XT, + kmous=\E[M, use=nsterm-build343, + +# reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD +# Comparing with build361, little has changed, except that italics work. +# Direct-color is not supported, by the way. +# +# Improved rmso/rmul -TD +nsterm-build400|Terminal.app in OS X 10.13, + rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006, + use=ecma+italics, use=nsterm-build361, + +# This is an alias which should always point to the "current" version +nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app, + use=nsterm-build400, + +#### iTerm, iTerm2 + +# iTerm 0.10 +# +# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more +# featureful) terminal emulator for Mac OS X. It is similar enough in +# capabilities to nsterm-16color that I have derived this description from that +# one, but as far as I know they share no code. Many of the features are +# user-configurable, but I attempt only to describe the default configuration +# (B. Sittler). +# +# According to its documentation, iTerm uses terminfo to obtain function key +# definitions. For example, if it is started with TERM=xterm, it uses key +# definitons from that terminal description from the local OSX machine. Those +# $TERM settings may be augmented using the bookmark and profile dialogs. +# However, the behavior seen with tack does not agree with either the terminfo +# description or the function keys in its "xterm" profile. +# +# NOTES: +# with vttest: +# reports primary DA as VT100 with AVO: \E[?1;2c +# reports secondary DA as "\E[>0;95;c" +# supports blink and underline +# displays bold text as red +# recognizes all dtterm controls for modifying/querying window +# resizing via escape sequence is very slow +# supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking) +# supports X11R5 alternate screen and XFree86 1049 (no 1047/1048) +# supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA +# with tack: +# . +# with ncurses test-program: +# ncurses 'k' has problem in second screen; light background does not fill +# with xterm scripts +# can display/alter xterm-256color cube +# can display/alter xterm-88color cube +iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X, + am, bce, hs, mir, msgr, npc, xenl, xon, + cols#80, it#8, lines#24, wsl#50, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, - is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, - kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, - kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, - rmso=\E[27m, rmul=\E[24m, - rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, - sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, - smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, - smul=\E[4m, use=ecma+color, use=vt220+keypad, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?, + kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8, + rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, + rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? + %p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H, + use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad, + use=xterm+x11mouse, use=xterm+256setaf, + +# iTerm2 3.0.15 +# +# https://www.iterm2.com/ +# https://github.com/gnachman/iTerm2 +# ~/Library/Preferences/com.googlecode.iterm2.plist +# "iTerm" stalled in 2009. A different set of developers began "iTerm2". +# +# NOTES: +# with vttest: +# reports primary DA as VT100 with AVO: \E[?1;2c +# reports secondary DA as "\E[>0;95;0c" +# numeric keypad application mode does not work +# by default, dtterm window-modifications are ignored +# by default, dtterm window-reports return, but icon as "L", window as "l" +# supports SD/SU, no REP, SL, SR +# supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR) +# no improvement to XFree86 1047/1048 modes +# with tack: +# in meta-mode, imitates xterm, sending UTF-8 +# special-key modifiers based on xterm use incompatible default for alt/meta +# with ncurses test-program: +# no italics +# no improvement to ncurses 'k' +# with xterm scripts: +# acolors.sh works +# +# Italic text did not work initially, apparently because upgrading did not +# add/change that preference (set in Preferences, Profiles, Text). A new +# install of iTerm 3.0.15 provides italics by default (blinking text is an +# option in the preferences dialog). +# +# 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5 +# 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD +iTerm2.app|iterm2|terminal emulator for Mac OS X, + blink=\E[5m, cbt=\E[Z, dim=\E[2m, indn=\E[%p1%dS, + kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, + kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, + kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, + kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, + kf23=\E[23;2~, kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, + nel=\EE, op=\E[39;49m, rin=\E[%p1%dT, rmso=\E[27m, + rmul=\E[24m, rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;m%?%p9%t\016%e\017%;, + kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B, + kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F, + kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H, + kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H, + kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D, + kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~, + kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C, + kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A, + kUP5=\E[1;5A, kUP6=\E[1;6A, use=xterm+alt+title, + use=ecma+italics, use=iterm, -# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of -# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support -# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This -# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except -# that each of those implements the home, end, delete keys differently. +# xnuppc - Darwin PowerPC Console (a.k.a. "darwin") # -# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce -# colors; note that this is not compatible with the 5.2 version. -# csw (2002-05-15): make xterm-color primary instead of nxterm, to -# match XFree86's xterm.terminfo usage and prevent circular links -xterm-color|nxterm|generic color xterm, - ncv@, - op=\E[m, use=xterm-r6, use=klone+color, - -# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 -gnome-rh62|Gnome terminal, - bce, - kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - use=xterm-color, - -# GNOME Terminal 1.4.0.4 (Redhat 7.2) +# On PowerPC platforms, Apple's Darwin operating system uses a +# full-screen system console derived from a NetBSD framebuffer +# console. It is an ANSI-style terminal, and is not really VT-100 +# compatible. # -# This implements a subset of vt102 with a random selection of features from -# other terminals such as color and function-keys. +# Under Mac OS X, this is the system console driver used while in +# single-user mode [reachable by holding down Command-S during the +# boot process] and when logged in using console mode [reachable by +# typing ">console" at the graphical login prompt.] # -# shift-f1 to shift-f10 are f11 to f20 +# If you're looking for a description of the Terminal.app terminal +# emulator which runs under the Mac OS X Quartz windowing system (and +# other AppKit-supported windowing systems,) see the "nsterm" +# entry instead. # -# NumLock changes the application keypad to approximate vt100 keypad, except -# that there is no escape sequence matching comma (,). +# NOTE: Under Mac OS X version 10.1, the default login window does not +# prompt for user name, instead requiring an icon to be selected from +# a list of known users. Since the special ">console" login is not in +# this list, you must make one of two changes in the Login Window +# panel of the Login section of System Prefs to make the special +# ">console" login accessible. The first option is to enable 'Show +# "Other User" in list for network users', which will add a special +# "Other..." icon to the graphical login panel. Selecting "Other..." +# will present the regular graphical login prompt. The second option +# is to change the 'Display Login Window as:' setting to 'Name and +# password entry fields', which replaces the login panel with a +# graphical login prompt. # -# Other defects observed: -# vt100 LNM mode is not implemented. -# vt100 80/132 column mode is not implemented. -# vt100 DECALN is not implemented. -# vt100 DECSCNM mode is not implemented, so flash does not work. -# vt100 TBC (tab reset) is not implemented. -# xterm alternate screen controls do not restore cursor position properly -# it hangs in tack after running function-keys test. -gnome-rh72|GNOME Terminal, - bce, km@, - civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, - sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, - -# GNOME Terminal 2.0.1 (Redhat 8.0) +# There are no function keys, at least not in Darwin 1.3. # -# Documentation now claims it implements vt220 (which is demonstrably false). -# However, it does implement ECH, which is a vt220 feature. And there are -# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display -# more of its bugs using vttest. +# It has no mouse support. # -# However, note that bce and msgr are broken in this release. Tabs (tbc and -# hts) are broken as well. Sometimes flash (as in xterm-new) works. +# It has full ANSI color support, and color combines correctly with +# all three supported attributes: bold, inverse-video and underline. +# However, bold colored text is almost unreadable (bolding is +# accomplished using shifting and or-ing, and looks smeared) so bold +# has been excluded from the list of color-compatible attributes +# [using (ncv)]. The monochrome entry (-m) is useful if you use a +# monochrome monitor. # -# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu -# operations. Shift-tab generates a distinct sequence so it can be argued -# that it implements kcbt. -gnome-rh80|GNOME Terminal, - bce@, msgr@, - ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, - kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, - -# GNOME Terminal 2.2.1 (Redhat 9.0) +# There is one serious bug with this terminal emulation's color +# support: repositioning the cursor onto a cell with non-matching +# colors obliterates that cell's contents, replacing it with a blank +# and displaying a colored cursor in the "current" colors. There is +# no complete workaround at present [other than using the monochrome +# (-m) entries,] but removing the (msgr) capability seemed to help. # -# bce and msgr are repaired. -gnome-rh90|GNOME Terminal, - bce, msgr, - hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, - kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, - vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, - use=gnome-rh80, +# The "standout" chosen was simple reverse-video, although a colorful +# standout might be more aesthetically pleasing. Similarly, the bold +# chosen is the terminal's own smeared bold, although a simple +# color-change might be more readable. The color-bold (-b) entries +# uses magenta colored text for bolding instead. The fancy color (-f +# and -f2) entries use color for bold, standout and underlined text +# (underlined text is still underlined, though.) +# +# Apparently the terminal emulator does support a VT-100-style +# alternate character set, but all the alternate character set +# positions have been left blank in the font. For this reason, no +# alternate character set capabilities have been included in this +# description. The console driver appears to be ASCII-only, so (enacs) +# has been excluded [although the VT-100 sequence does work.] +# +# The default Mac OS X and Darwin installation reports "vt100" as the +# terminal type, and exports no helpful environment variables. To fix +# this, change the "console" entry in /etc/ttys from "vt100" to +# "xnuppc-WxH", where W and H are the character dimensions of your +# console (see below.) +# +# The font used by the terminal emulator is apparently one originally +# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This +# file includes descriptions for the following geometries: +# +# Pixels Characters Entry Name (append -m for monochrome) +# ------------------------------------------------------------------- +# 640x400 80x25 xnuppc-80x25 +# 640x480 80x30 xnuppc-80x30 +# 720x480 90x30 xnuppc-90x30 +# 800x600 100x37 xnuppc-100x37 +# 896x600 112x37 xnuppc-112x37 +# 1024x640 128x40 xnuppc-128x40 +# 1024x768 128x48 xnuppc-128x48 +# 1152x768 144x48 xnuppc-144x48 +# 1280x1024 160x64 xnuppc-160x64 +# 1600x1024 200x64 xnuppc-200x64 +# 1600x1200 200x75 xnuppc-200x75 +# 2048x1536 256x96 xnuppc-256x96 +# +# The basic "xnuppc" entry includes no size information, and the +# emulator includes no reporting capability, so you'll be at the mercy +# of the TTY device (which reports incorrectly on my hardware.) The +# color-bold entries do not include size information. -# GNOME Terminal 2.14.2 (Fedora Core 5) -# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. -gnome-fc5|GNOME Terminal, - rs1=\Ec, - rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, - use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, +# The '+' entries are building blocks +xnuppc+basic|Darwin PowerPC Console basic capabilities, + am, bce, mir, xenl, + it#8, + bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, + el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, + rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, + rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, + sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, use=vt100+keypad, -gnome|GNOME Terminal, - use=gnome-fc5, +xnuppc+c|Darwin PowerPC Console ANSI color support, + colors#8, ncv#32, pairs#64, + op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, -# palette is hardcoded... -gnome-256color|GNOME Terminal with xterm 256-colors, - initc@, use=xterm+256color, use=gnome, +xnuppc+b|Darwin PowerPC Console color-bold support, + ncv#32, + bold=\E[35m, + sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, + use=xnuppc+basic, -# XFCE Terminal 0.2.5.4beta2 -# -# This is based on some of the same source code, e.g., the VTE library, as -# gnome-terminal, but has fewer features, fails more screens in vttest. -# Since most of the terminfo-related behavior is due to the VTE library, -# the terminfo is the same as gnome-terminal. -xfce|Xfce Terminal, - use=gnome, +xnuppc+f|Darwin PowerPC Console fancy color support, + ncv#35, + sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%; + m, + smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, -# Multi-Gnome-Terminal 1.6.2 -# -# This does not use VTE, and does have different behavior (compare xfce and -# gnome). -mgt|Multi GNOME Terminal, - indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, +xnuppc+f2|Darwin PowerPC Console alternate fancy color support, + ncv#35, + bold=\E[33m, + sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, + smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, -# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce -# or not is debatable). -kvt|KDE terminal, - bce, km@, - kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, +# Building blocks for specific screen sizes +xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels), + cols#80, lines#25, -# Konsole 1.0.1 -# (formerly known as kvt) -# -# This program hardcodes $TERM to 'xterm', which is not accurate. However, to -# simplify this entry (and point out why konsole isn't xterm), we base this on -# xterm-r6. The default keyboard appears to be 'linux'. -# -# Notes: -# a) konsole implements several features from XFree86 xterm, though none of -# that is documented - except of course in its source code - apparently -# because its implementors are unaccustomed to reading documentation - as -# evidenced by the sparse and poorly edited documentation distributed with -# konsole. Some features such as the 1049 private mode are recognized but -# incorrectly implemented as a duplicate of the 47 private mode. -# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad -# sends PC-style escapes rather than vt100. -# c) fails vttest menu 3 (Test of character sets) because it does not properly -# parse some control sequences. Also fails vttest Primary Device Attributes -# by sending a bogus code (in the source it says it's supposed to be a -# vt220, which is doubly incorrect because it does not implement vt220 -# control sequences except for a few special cases). Treat it as a -# mildly-broken vt102. -# -# Update for konsole 1.3.2: -# The 1049 private mode works (but see the other xterm screens in vttest). -# Primary Device Attributes now returns the code for a vt100 with advanced -# video option. Perhaps that's intended to be a "mildly-broken vt102". -# -# Updated for konsole 1.6.4: -# add konsole-solaris -konsole-base|KDE console window, - bce, km@, npc, - bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, - ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, - hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@, - kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, - kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, - kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, - rmso=\E[27m, rmul=\E[24m, - rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, - use=ecma+color, use=xterm-r6, -konsole-linux|KDE console window with linux keyboard, - kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, - kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, - kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - use=konsole-base, -konsole-solaris|KDE console window with Solaris keyboard, - kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, -# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather -# than testing the code. -konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, - kend=\E[4~, khome=\E[1~, use=konsole-vt100, -# The value for kbs reflects local customization rather than the settings used -# for XFree86 xterm. -konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, - kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, - kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, - kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, - kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS, - khome=\EOH, use=konsole-vt100, -# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but -# it is still useful for deriving the other entries. -konsole-vt100|KDE console window with vt100 (sic) keyboard, - kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, - kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[H, use=konsole-base, -konsole-vt420pc|KDE console window with vt420 pc keyboard, - kbs=^H, kdch1=\177, use=konsole-vt100, -konsole-16color|klone of xterm-16color, - ncv#32, use=ibm+16color, use=konsole, -# make a default entry for konsole -konsole|KDE console window, - use=konsole-xf4x, +xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels), + cols#80, lines#30, -# palette is hardcoded... -konsole-256color|KDE console window with xterm 256-colors, - initc@, use=xterm+256color, use=konsole, +xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels), + cols#90, lines#30, -# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD +xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels), + cols#100, lines#37, + +xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels), + cols#112, lines#37, + +xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels), + cols#128, lines#40, + +xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels), + cols#128, lines#48, + +xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels), + cols#144, lines#48, + +xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels), + cols#160, lines#64, + +xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels), + cols#200, lines#64, + +xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels), + cols#200, lines#75, + +xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels), + cols#0x100, lines#96, + +# These are different combinations of the building blocks + +xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome), + use=xnuppc+basic, + +xnuppc|darwin|Darwin PowerPC Console (color), + use=xnuppc+c, use=xnuppc+basic, + +xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold), + use=xnuppc+b, + +xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold), + use=xnuppc+b, use=xnuppc+c, + +xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome), + use=xnuppc+f, + +xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color), + use=xnuppc+f, use=xnuppc+c, + +xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome), + use=xnuppc+f2, + +xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color), + use=xnuppc+f2, use=xnuppc+c, + +# Combinations for specific screen sizes +xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25, + use=xnuppc+80x25, use=xnuppc+basic, + +xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25, + use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, + +xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30, + use=xnuppc+80x30, use=xnuppc+basic, + +xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30, + use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, + +xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30, + use=xnuppc+90x30, use=xnuppc+basic, + +xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30, + use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, + +xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37, + use=xnuppc+100x37, use=xnuppc+basic, + +xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37, + use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, + +xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37, + use=xnuppc+112x37, use=xnuppc+basic, + +xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37, + use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, + +xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40, + use=xnuppc+128x40, use=xnuppc+basic, + +xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40, + use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, + +xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48, + use=xnuppc+128x48, use=xnuppc+basic, + +xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48, + use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, + +xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48, + use=xnuppc+144x48, use=xnuppc+basic, + +xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48, + use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, + +xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64, + use=xnuppc+160x64, use=xnuppc+basic, + +xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64, + use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, + +xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64, + use=xnuppc+200x64, use=xnuppc+basic, + +xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64, + use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, + +xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75, + use=xnuppc+200x75, use=xnuppc+basic, + +xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75, + use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, + +xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96, + use=xnuppc+256x96, use=xnuppc+basic, + +xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96, + use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, + +######## DOS/WINDOWS +# CRT is shareware. It implements some xterm features, including mouse. +crt|crt-vt220|CRT 2.3 emulating VT220, + bce, msgr, + ncv@, + hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, + +#### PuTTY +# PuTTY 0.55 (released 3 August 2004) +# http://www.chiark.greenend.org.uk/~sgtatham/putty/ # -# It is nominally a vt102 emulator, with features borrowed from rxvt and -# xterm. +# Comparing with 0.51, vttest is much better (only a few problems with the +# cursor position reports and wrapping). # -# The function keys are numbered based on shift/control/alt modifiers, except -# that the control-modifier itself is used to spawn a new copy of mlterm (the -# "-P" option). So control/F1 to control/F12 may not be usable, depending on -# how it is configured. +# PuTTY 0.51 (released 14 December 2000) # -# kf1 to kf12 \E[11~ to \E[24~ -# shift kf1 to kf12 \E[11;2~ to \E[24;2~ -# alt kf1 to kf12 \E[11;3~ to \E[24;3~ -# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ -# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) -# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ -# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ -# control/shit/alt kf1 to kf12 \E[11;8~ to \E[24;8~ +# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as +# well as SCO and Atari, color palettes from Linux console). Reading the code, +# it is intended to be VT102 plus selected features. By default, it sets $TERM +# to xterm, which is incorrect, since several features are misimplemented: # -mlterm|multi lingual terminal emulator, - am, eslok, km, mc5i, mir, msgr, npc, xenl, - colors#8, cols#80, it#8, lines#24, pairs#64, - acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, - is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, - kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, - kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, - kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, - kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, - kf24=\E[24;2~, kf25=\E[11;5~, kf26=\E[12;5~, - kf27=\E[13;5~, kf28=\E[14;5~, kf29=\E[15;5~, kf3=\E[13~, - kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, - kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, - kf36=\E[24;5~, kf37=\E[11;6~, kf38=\E[12;6~, - kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, kf41=\E[15;6~, - kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, - kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, - kf48=\E[24;6~, kf49=\E[11;3~, kf5=\E[15~, kf50=\E[12;3~, - kf51=\E[13;3~, kf52=\E[14;3~, kf53=\E[15;3~, - kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, - kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, - kf60=\E[24;3~, kf61=\E[11;4~, kf62=\E[12;4~, - kf63=\E[13;4~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, - kpp=\E[5~, kslt=\E[4~, mc0=\E[i, nel=\EE, op=\E[39;49m, - rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, - rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, - rmso=\E[27m, rmul=\E[24m, - rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, - sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, - smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, - vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, - -# The insert/delete/home/end keys do not respond to modifiers because mlterm -# looks in its termcap to decide which string to send. If it used terminfo -# (when available), it could use the extended names introduced for xterm. -mlterm+pcfkeys|fragment for PC-style fkeys, - kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, - kDN=\EO1;2B, kDN5=\EO1;5B, kDN6=\EO1;6B, kIC5=\E[2;5~, - kIC6=\E[2;6~, kLFT5=\EO1;5D, kLFT6=\EO1;6D, - kNXT5=\E[6;5~, kNXT6=\E[6;6~, kPRV5=\E[5;5~, - kPRV6=\E[5;6~, kRIT5=\EO1;5C, kRIT6=\EO1;6C, kUP=\EO1;2A, - kUP5=\EO1;5A, kUP6=\EO1;6A, - -# From: Thomas Dickey 04 Oct 1997 -# Updated: Oezguer Kesim 02 Nov 1997 -# Notes: -# rxvt 2.21b uses -# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, -# but some applications don't work with that. -# It also has an AIX extension -# box2=lqkxjmwuvtn, -# and -# ech=\E[%p1%dX, -# but the latter does not work correctly. +# Alt+key always sends ESC+key, so 'km' capability is removed. # -# The distributed terminfo says it implements hpa and vpa, but they are not -# implemented correctly, using relative rather than absolute positioning. +# Control responses, wrapping and tabs are buggy, failing a couple of +# screens in vttest. # -# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. -# Since rxvt is not really compatible with xterm, it should be configured as -# "rxvt" (monochrome) and "rxvt-color". +# xterm mouse support is not implemented (unrelease version may). # -# removed dch/dch1 because they are inconsistent with bce/ech -TD -# remove km as per tack test -TD -rxvt-basic|rxvt terminal base (X Window System), - OTbs, am, bce, eo, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, +# Several features such as backspace/delete are optional; this entry documents +# the default behavior -TD +# +# PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen, +# but implements it incorrectly as mentioned here: +# http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114 +putty|PuTTY terminal emulator, + am, bce, bw, ccc, mir, msgr, xenl, xon, XT, + colors#8, it#8, ncv#22, pairs#64, U8#1, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, - hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, - ind=^J, is1=\E[?47l\E=\E[?1l, - is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, - kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, - rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, - rmul=\E[24m, - rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, - rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, - s0ds=\E(B, s1ds=\E(0, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, - smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, - use=rxvt+pcfkeys, use=vt220+keypad, -# Key Codes from rxvt reference: + cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + dch=\E[%p1%dP, dch1=\E[P, + dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G + \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e + %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G + \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@ + %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E + %%G\340\202\242\E%%@%e%p1%c%;, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, + il1=\E[L, ind=\n, indn=\E[%p1%dS, + initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/ + %02x%p4%{255}%*%{1000}%/%02x, + is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, + kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, + kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A, + kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, + rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>, + rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, + rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, + s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, + smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, + use=putty+fnkeys, use=vt102+enq, use=xterm+sl, +vt100-putty|Reset PuTTY to pure vt100, + rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, + use=vt100, +putty-256color|PuTTY 0.58 with xterm 256-colors, + use=xterm+256setaf, use=putty, +putty-noapp|putty with cursor keys in normal mode, + kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=, + use=putty, + +# One of the keyboard selections is "VT100+". +# pterm (the X11 port) uses shifted F1-F10 as F11-F20 +putty-vt100|VT100+ keyboard layout, + use=putty+fnkeys+vt100, use=putty, + +putty-sco|putty with SCO function keys, + use=putty+fnkeys+sco, use=putty, + +# PuTTY has more than one section in its Keyboard configuration: +# a) backspace/delete, which we ignore since that choice largely depends on +# whether one matches Unix and BSD or Linux. +# b) home/end keys, also ignored because the "rxvt" setting sends keys which +# are unrelated to rxvt's actual settings. +# c) function keys and keypad - this is the interesting part. None of the +# selections match any of their respective namesakes, but they are shown +# here to help users who expect that the selections do what is implied. +# +# This is the default setting for PuTTY +putty+fnkeys|fn-keys for PuTTY, + use=putty+fnkeys+esc, + +putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY, + kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, + kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + +putty+fnkeys+linux|Linux fn-keys for PuTTY, + kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, + use=putty+fnkeys+esc, + +putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + use=putty+fnkeys+esc, + +putty+fnkeys+vt400|VT400 fn-keys for PuTTY, + use=putty+fnkeys+esc, + +# Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct +# key is F20. +putty+fnkeys+vt100|VT100+ fn-keys for PuTTY, + kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, + kf9=\EOX, use=putty+fnkeys+esc, + +# Unlike xterm-sco, this leaves kmous ambiguous with kf1. # -# Note: Shift + F1-F10 generates F11-F20 +# Use modifiers to obtain function keys past 12: +# F1-F12 - normal +# F13-F24 - shift +# F25-F36 - control/alt +# F37-F48 - control/shift # -# For the keypad, use Shift to temporarily override Application-Keypad -# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock -# is off, escape sequences toggle Application-Keypad setting. -# Also note that values of Home, End, Delete may have been compiled -# differently on your system. +putty+fnkeys+sco|SCO fn-keys for PuTTY, + kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, + kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, + kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, + kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, + kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, + kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, + kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, + kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, + kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, + kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, + kich1=\E[L, knp=\E[G, kpp=\E[I, + +#### TeraTerm + +# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by +# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator +# (communication program) which supports: # -# Normal Shift Control Ctrl+Shift -# Tab ^I ESC [ Z ^I ESC [ Z -# BackSpace ^H ^? ^? ^? -# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ -# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ -# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ -# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ -# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ -# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ -# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ -# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ -# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ -# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ -# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ -# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ -# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ -# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ -# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ -# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ -# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ -# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ -# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ -# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ -# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ -# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ -# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ -# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ -# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ -# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ -# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ -# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ -# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ +# - Serial port connections. +# - TCP/IP (telnet) connections. +# - VT100 emulation, and selected VT200/300 emulation. +# - TEK4010 emulation. +# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and +# Quick-VAN). +# - Scripts using the "Tera Term Language". +# - Japanese and Russian character sets. # -# Application -# Up ESC [ A ESC [ a ESC O a ESC O A -# Down ESC [ B ESC [ b ESC O b ESC O B -# Right ESC [ C ESC [ c ESC O c ESC O C -# Left ESC [ D ESC [ d ESC O d ESC O D -# KP_Enter ^M ESC O M -# KP_F1 ESC O P ESC O P -# KP_F2 ESC O Q ESC O Q -# KP_F3 ESC O R ESC O R -# KP_F4 ESC O S ESC O S -# XK_KP_Multiply * ESC O j -# XK_KP_Add + ESC O k -# XK_KP_Separator , ESC O l -# XK_KP_Subtract - ESC O m -# XK_KP_Decimal . ESC O n -# XK_KP_Divide / ESC O o -# XK_KP_0 0 ESC O p -# XK_KP_1 1 ESC O q -# XK_KP_2 2 ESC O r -# XK_KP_3 3 ESC O s -# XK_KP_4 4 ESC O t -# XK_KP_5 5 ESC O u -# XK_KP_6 6 ESC O v -# XK_KP_7 7 ESC O w -# XK_KP_8 8 ESC O x -# XK_KP_9 9 ESC O y +# The program does not come with terminfo or termcap entries. However, the +# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no +# vt52 or doublesize character support; blinking is done with color). Besides +# the HPA, VPA extensions it also implements CPL and CNL. # -# The source-code for rxvt actually defines mappings for F21-F35, using -# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys -# are rare, so this entry uses the shift- and control-modifiers as in -# xterm+pcfkeys to define keys past F12. +# All of the function keys can be remapped. This description shows the default +# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys +# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad +# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, +# kfnd Insert +# kslt Delete +# kich1 Home +# kdch1 PageUp +# kpp End +# knp PageDown # -# kIC is normally not used, since rxvt performs a paste for that (shifted -# insert), unless private mode 35 is set. +# ANSI colors are implemented, but cannot be combined with video attributes +# except for reverse. # -# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD -# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD -rxvt+pcfkeys|fragment for PC-style fkeys, - kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, - kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, - kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, - kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, - kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, - kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, - kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, - kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, - kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, - kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, - kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb, - kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@, - kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^, - kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc, - kUP=\E[a, kUP5=\EOa, +# No fonts are supplied with the program, so the acsc string is chosen to +# correspond with the default Microsoft terminal font. +# +# Tera Term recognizes some xterm sequences, including those for setting and +# retrieving the window title, and for setting the window size (i.e., using +# "resize -s"), though it does not pass SIGWINCH to the application if the +# user resizes the window with the mouse. +teraterm2.3|Tera Term Pro, + km, + ncv#43, vt@, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, + cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, + il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, + rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, + smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, + use=klone+color, use=vt100, -rxvt|rxvt terminal emulator (X Window System), - ncv@, - hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, - vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, -rxvt-color|rxvt terminal emulator (X Window System), - use=rxvt, -rxvt-256color|rxvt 2.7.9 with xterm 256-colors, - use=xterm+256color, use=rxvt, -rxvt-xpm|rxvt terminal emulator (X Window System), - use=rxvt, -rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, - acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - use=rxvt, -rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, - acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, - use=rxvt-cygwin, +# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary +# to choose a Windows OEM font). +# +# Testing with tack: +# - it does not have xenl (suppress that) +# - underline seems to work with color (modify ncv). +# Testing with vttest: +# - wrapping differs from vt100 (menu 1). +# - it recognizes xterm's X10 and normal mouse tracking, but none of the +# other flavors. +# - it recognizes the dtterm window controls for reporting size in +# characters and pixels. +# - it passes SIGWINCH. +teraterm4.59|Tera Term Pro, + bce, xenl@, + ncv#41, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + kmous=\E[M, use=teraterm2.3, + +# Version 4.97 +# +# Testing with tack: +# - no bell (flash works) +# - bold is yellow, blink is red. +# - default keyboard sends ^? for Delete, can be configured for kdch1 +# - no meta mode +# Testing with vttest: +# + autowrap has problems... +# + color-tests for bce feature match xterm's behavior +# + handles most of xterm's mouse-controls other than highlight-tracking. +# xterm's SGR 1006 works. +# + partial support for DEC locator-events +# + implements ECMA-48 SD/SU, but not REP, SL/SR. +# + has a "Tek" window, but does not work with vttest's examples +# + supports the dtterm window modify/report controls +# + responds to DECRQM and DECRQSS controls, but not consistent with DSR +# e.g., for VT220 +# + VT220 screen-display tests are ok +# + no VT52 support +# Other tests: +# + recognizes xterm's original direct-colors sequences, but result is +# poor. +# + no UTF-8 apparent when UTF-8 is set, with font Lucida Control +teraterm4.97|Tera Term Pro, + XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59, +teraterm-256color|TeraTerm with xterm 256-colors, + use=xterm+256setaf, use=teraterm, + +teraterm|Tera Term, + use=teraterm4.97, -# This variant is supposed to work with rxvt 2.7.7 when compiled with -# NO_BRIGHTCOLOR defined. rxvt needs more work... -rxvt-16color|xterm with 16 colors like aixterm, - ncv#32, use=ibm+16color, use=rxvt, +# Tested with WinNT 4.0, the telnet application assumes the screensize is +# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. +# +# Other notes: +# a) Fails tack's cup (cursor-addressing) test, though cup works well enough +# for casual (occasional) use. Also fails several of the vttest screens, +# but that is not unusual for vt100 "emulators". +# b) Does not implement vt100 keypad +# c) Recognizes a subset of vt52 controls. +ms-vt100|MS telnet imitating dec vt100, + lines#25, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, + kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, -# From: Michael Jennings +# Tested with Windows 2000, the telnet application runs in a console window, +# also using 'Terminal' font. # -# Eterm 0.9.3 +# Other notes: +# a) This version has no function keys or numeric keypad. Unlike the older +# version, the numeric keypad is entirely ignored. +# b) The program sets $TERM to "ansi", which of course is inaccurate. +ms-vt100-color|vtnt|windows 2000 ansi (sic), + bce, + dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, + use=ms-vt100, + +# Based on comments from Federico Bianchi: # -# removed kf0 which conflicts with kf10 -TD -# remove cvvis which conflicts with cnorm -TD -# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT -# but does otherwise follow the rxvt+pcfkeys model -TD -# remove nonworking flash -TD -# remove km as per tack test -TD -Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), - am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, - btns#5, cols#80, it#8, lines#24, lm#0, ncv@, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, - is1=\E[?47l\E>\E[?1l, - is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, - kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, - kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, - mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, - rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, - rmso=\E[27m, rmul=\E[24m, - rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, - rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, - sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, - smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, - use=ecma+color, +# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different +# scheme for PF keys. +# +# and PuTTY wishlist: +# +# The modifiers are represented as the codes listed above, prefixed to +# the normal sequences. If the modifier is pressed alone, its sequence +# is transmitted twice in succession. If multiple modifiers apply, +# they're transmitted in the order shift, control, alt. +# +# Shift \E^S +# Alt \E^A, +# Ctrl \E^C, +ms-vt100+|vt100+|windows XP vt100+ (sic), + kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, + kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, + kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, + kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, + kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, + kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, + kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, + kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, + kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, + kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, + kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, + kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, + kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, + kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, + knp=\E/, kpp=\E?, use=ms-vt100-color, -# xiterm 0.5-5.2 -# This is not based on xterm's source... -# vttest shows several problems with keyboard, cursor-movements. -# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm -xiterm|internationalized terminal emulator for X, - km@, - kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, +ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, + use=ms-vt100+, -# These (xtermc and xtermm) are distributed with Solaris. They refer to a -# variant of xterm which is apparently no longer supported, but are interesting -# because they illustrate SVr4 curses mouse controls - T.Dickey -xtermm|xterm terminal emulator (monocrome), + +######## X TERMINAL EMULATORS +#### XTERM +# +# You can add the following line to your .Xdefaults to change the terminal type +# set by the xterms you start up to my-xterm: +# +# *termName: my-xterm +# +# System administrators can change the default entry for xterm instances +# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either +# case, xterm will detect and reject an invalid terminal type, falling back +# to the default of xterm. +# + +# X10/6.6 11/7/86, minus alternate screen, plus (csr) +# (xterm: ":MT:" changed to ":km:"; added / based on init string; +# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) +# as these seem not to work -- esr) +x10term|vs100-x10|xterm terminal emulator (X10 window system), + OTbs, am, km, mir, msgr, xenl, xon, + cols#80, it#8, lines#65, + bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, + il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, + smso=\E[7m, smul=\E[4m, +# Compatible with the R5 xterm +# (from the XFree86 3.2 distribution, removed) +# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD +# corrected typos in rs2 string - TD +# added u6-u9 -TD +xterm-r5|xterm R5 version, + OTbs, am, km, msgr, xenl, + cols#80, it#8, lines#24, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~, + kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, + kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, + sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 + %;m, + sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs, +# Compatible with the R6 xterm +# (from XFree86 3.2 distribution, and added, removed) +# added khome/kend, hts based on the R6 xterm code - TD +# (khome/kend do not actually work in X11R5 or X11R6, but many people use this +# for compatibility with other emulators). +xterm-r6|xterm X11R6 version, OTbs, am, km, mir, msgr, xenl, - btns#3, cols#80, it#8, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cols#80, it#8, lines#24, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, - home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, - kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, - kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, - knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, - rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, - rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, - smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, + el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, + il1=\E[L, ind=\n, + is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, + sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + use=xterm+kbs, use=vt100+enq, +xterm-old|antique xterm version, + use=xterm-r6, +# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. +# The name has been changed and some aliases have been removed. +xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), + OTbs, am, bce, km, mir, msgr, xenl, XT, + cols#80, it#8, lines#24, ncv@, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=\n, + is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, + kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, + ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, + sc=\E7, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq, + use=ecma+color, use=vt220+keypad, -xtermc|xterm terminal emulator (color), - colors#8, ncv#7, pairs#64, - op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - use=xtermm, +# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 +# codes for F1-F4 except while in VT220 mode. +xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, -# From: David J. MacKenzie 20 Apr 1995 -# Here's a termcap entry I've been using for xterm_color, which comes -# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the -# color stuff, I also have a status line defined as the window manager -# title bar. [I have translated it to terminfo -- ESR] -xterm-pcolor|xterm with color used for highlights and status line, - bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, - smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6, +# This version was released in XFree86 3.3.3 (November 1998). +# Besides providing printer support, it exploits a new feature that allows +# xterm to use terminfo-based descriptions with the titeInhibit resource. +# -- the distribution contained incorrect khome/kend values -TD +xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), + blink=\E[5m, ich1@, invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, + rmcup=\E[?1047l\E[?1048l, rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + smcup=\E[?1048h\E[?1047h, use=ansi+pp, + use=xterm-xf86-v33, -# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in -# from BSD termcap. (hpterm: added empty , we have no idea what ACS -# chars look like --esr) -hpterm|X-hpterm|hp X11 terminal emulator, - am, da, db, mir, xhp, - cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, - acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, - cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, - cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, - hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, - kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, - kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, - khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, - knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, - memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, - pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, - pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, - pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, - rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, - rmul=\E&d@, - sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, - sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, - smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, -# HPUX 11 provides a color version. -hpterm-color|HP X11 terminal emulator with color, - ccc, - colors#64, pairs#8, - home=\E&a0y0C, - initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, - op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, +# This version was released in XFree86 4.0. +xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), + npc, + kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, + kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, + ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, + kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, + kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, + kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, + kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, + kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, + kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, + kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, + kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, + kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, + kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, + kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? + %p9%t\016%e\017%;, + smcup=\E[?1049h, use=xterm-xf86-v333, -# This entry describes an xterm with Sun-style function keys enabled -# via the X resource setting "xterm*sunFunctionKeys:true" -# To understand / note that L1,L2 and F11,F12 are the same. -# The ... keys are L3-L10. We don't set -# because we want it to be seen as . -# The ... keys are R1-R15. We treat some of these in accordance -# with their Sun keyboard labels instead. -# From: Simon J. Gerraty 10 Jan 1996 -xterm-sun|xterm with sunFunctionKeys true, - kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, - kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, - kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, - kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, - kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, - kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, - kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, - kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, - kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, - kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, - kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, +# This version was released in XFree86 4.3. +xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), + kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, + kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, + kbeg@, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p7%t;8%;m%?%p9%t\016%e\017%;, + use=xterm-xf86-v40, + +# This version was released in XFree86 4.4. +xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), + cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, + rin=\E[%p1%dT, use=xterm-xf86-v43, + +xterm-xfree86|xterm terminal emulator (XFree86), + use=xterm-xf86-v44, + +# This version reflects the current xterm features. +xterm-new|modern xterm terminal emulator, + npc, + indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM, + rin=\E[%p1%dT, use=ansi+rep, use=ecma+strikeout, + use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux, use=xterm-basic, -xterms-sun|small (80x24) xterm with sunFunctionKeys true, - cols#80, lines#24, use=xterm-sun, -# This is for the extensible terminal emulator on the X11R6 contrib tape. -# It corresponds to emu's internal emulation: -# emu -term emu -# emu's default sets TERM to "xterm", but that doesn't work well -TD -# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD -# fixes: add civis, cnorm, sgr -TD -emu|emu native mode, - am, bce, mir, msgr, xon, - colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, - acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, - bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, - cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, - cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED, - cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, - dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, - ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, - hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, - is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, - kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, - kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, - kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, - kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, - kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, - kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, - op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, - rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, - setaf=\Er%i%p1%d;, - sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, - sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, - -# vt220 Terminfo entry for the Emu emulation, corresponds to -# emu -term vt220 -# with NumLock set (to make the keypad transmit kf0-kf9). -# fixes: add am, xenl, corrected sgr0 -TD -emu-220|Emu-220 (vt200-7bit mode), - am, xenl, xon, - cols#80, it#8, lines#24, vt#200, - acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, - blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, - clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, - cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, - dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, - ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, - hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, - il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, - kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, - kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, - kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, - kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, - kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, - kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, - kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, - knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, - ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, - rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, - sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, - smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, -# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, -# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings -# indicate that it emulates more than one terminal, but incompletely. +# This fragment is for people who cannot agree on what the backspace key +# should send. +xterm+kbs|fragment for backspace key, + kbs=^H, # -# This is adapted from a FreeBSD bug-report by Daniel Rudy -# It is based on vt102's entry, with some subtle differences, but also -# has status line -# supports ANSI colors (except for 'op' string) -# apparently implements alternate screen like xterm -# does not use padding, of course. -mvterm|vv100|SwitchTerm aka mvTERM, - am, eslok, hs, km, mir, msgr, xenl, - colors#8, cols#80, it#8, lines#24, pairs#64, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, - fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, - kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, - op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, - rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, - rmul=\E[m, - rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, - sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, - smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, +# This fragment describes as much of XFree86 xterm's "pc-style" function +# keys as will fit into terminfo's 60 function keys. +# From ctlseqs.ms: +# Code Modifiers +# --------------------------------- +# 2 Shift +# 3 Alt +# 4 Shift + Alt +# 5 Control +# 6 Shift + Control +# 7 Alt + Control +# 8 Shift + Alt + Control +# --------------------------------- +# The meta key may also be used as a modifier in this scheme, adding another +# bit to the parameter. +xterm+pcfkeys|fragment for PC-style fkeys, + use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, + use=xterm+pce2, +# +xterm+noapp|fragment with cursor keys in normal mode, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, + khome=\E[H, -### MTERM +xterm+app|fragment with cursor keys in application mode, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, + khome=\EOH, # -# This application is available by email from . +# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) +# and revised in xterm patch #167 (2002/8/24). Some other terminal emulators +# copied the earlier scheme, as noted in the "use=" clauses in this file. # -# "mterm -type ansi" sets $TERM to "ansi" -mterm-ansi|ANSI emulation, - am, bw, mir, msgr, - it#8, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, - cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, - dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, - el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, - il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, - invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, - ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, - rmul=\E[24m, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, - vpa=\E[%i%p1%dd, -# mterm normally sets $TERM to "mterm" -mterm|mouse-sun|Der Mouse term, - am, bw, mir, - it#8, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, - cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, - home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, - rmir=^O, rmso=^T, smir=^Q, smso=^V, -# "mterm -type decansi" sets $TERM to "decansi" +# The original assignments from patch #94 for cursor-keys had some technical +# issues: # -# note: kdch1, kfnd, kslt are in the source code, but do not work -TD -decansi|ANSI emulation with DEC compatibility hacks, - am, mir, msgr, xenl, - colors#8, it#8, pairs#64, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, - home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, - il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, - is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, - kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, - kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, - kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, - kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, - ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, - rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, - u7=\E[6n, vpa=\E[%i%p1%dd, - -#### MGR +# A parameter for a function-key to represent a modifier is just more +# bits. But for a cursor-key it may change the behavior of the +# application. For instance, emacs decodes the first parameter of a +# cursor-key as a repeat count. # -# MGR is a Bell Labs window system lighter-weight than X. -# These entries describe MGR's xterm-equivalent. -# They are courtesy of Vincent Broman 14 Jan 1997 +# A parameterized string should (really) not begin with SS3 (\EO). +# Rather, CSI (\E[) should be used. # - -mgr|Bellcore MGR (non X) window system terminal emulation, - am, km, - bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, - csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, - cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, - dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, - dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, - ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, - il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, - rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, - smul=\E4n, -mgr-sun|Mgr window with Sun keyboard, - ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, - kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, - kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, - kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, - kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, - kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, - kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, -mgr-linux|Mgr window with Linux keyboard, - ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, - kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, - kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, - -######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS +# For these reasons, the original assignments were deprecated. For +# compatibility reasons, they are still available as a setting of xterm's +# modifyCursorKeys resource. These fragments list the modified cursor-keys +# that might apply to xterm+pcfkeys with different values of that resource. # +# These entries will have warnings when checking with tic because the kri/kind +# capabilities duplicate the kUP/kDN extensions. This is intentional, though +# not part of the original plan. The changes for xterm patch #206 (2005/11/3) +# show that kri/kind were seen much later as part of a set including kLFT/kRIT: +# +# * modify xterm-new terminfo entry to use capabilities for shifted +# scroll forward/reverse as shifted cursor up/down. +# +# In the 1980s when terminfo was defined, the developers made more of +# a distinction between shifted up/down versus shifted left/right since most +# terminals can index (scroll up/down), while few can scroll left/right. +xterm+pcc3|fragment with modifyCursorKeys:3, + kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, + kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, + kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, + kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, + kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, + kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, + kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, + kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, + kUP7=\E[>1;7A, -# Columbus UNIX virtual terminal. This terminal also appears in -# UNIX 4.0 and successors as line discipline 1 (?), but is -# undocumented and does not really work quite right. -cbunix|cb unix virtual terminal, - OTbs, am, da, db, - cols#80, lines#24, lm#0, - bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, - el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, - smso=\Ea^D, smul=\Ea^A, -# (vremote: removed obsolete ":nl@:" -- esr) -vremote|virtual remote terminal, - am@, - cols#79, use=cbunix, +xterm+pcc2|fragment with modifyCursorKeys:2, + kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, + kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, + kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, + kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, + kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, + kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, + kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, -pty|4bsd pseudo teletype, - cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, - smso=\Ea$, smul=\Ea!, use=cbunix, +xterm+pcc1|fragment with modifyCursorKeys:1, + kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, + kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, + kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, + kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, + kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, + kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, -# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 -eterm|gnu emacs term.el terminal emulation, - am, mir, xenl, - cols#80, lines#24, - bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, - rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, - smul=\E[4m, +xterm+pcc0|fragment with modifyCursorKeys:0, + kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, + kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, + kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, + kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, + kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, + kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, -# Entries for use by the `screen' program by Juergen Weigert, -# Michael Schroeder, Oliver Laumann. The screen and -# screen-w entries came with version 3.7.1. The screen2 and screen3 entries -# come from University of Wisconsin and may be older. -# (screen: added on ANSI model -- esr) # -# 'screen' defines extensions to termcap. Some are used in its terminal -# description: -# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. -# AX (bool) Does understand ANSI set default fg/bg color -# (\E[39m / \E[49m). -# S0 (str) Switch charset 'G0' to the specified charset. -# E0 (str) Switch charset 'G0' back to standard charset. +# Here are corresponding fragments from xterm patch #216: # -# tested with screen 3.09.08 -screen|VT 100/ANSI X3.64 virtual terminal, - OTbs, OTpt, am, km, mir, msgr, xenl, G0, - colors#8, cols#80, it#8, lines#24, pairs#64, - acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, - cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, - flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, - nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, - rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, - rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, - smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, - S0=\E(%p1%c, use=ecma+color, -# The bce and status-line entries are from screen 3.9.13 (and require some -# changes to .screenrc). -screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, - bce, use=screen, -screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, - dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, +xterm+pcf0|fragment with modifyFunctionKeys:0, + kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, + kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, + kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, + kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, + kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, + kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, + kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, + kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, + kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, + kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, + kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, + kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, + kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, + kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, + kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, + kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, +# +xterm+pcf2|fragment with modifyFunctionKeys:2, + kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, + kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, + kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, + kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, + kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, + kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, + kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, + kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, + kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, + kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, + kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, + kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, + kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, + kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, + kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, + kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, +# +# Chunks from xterm #230: +xterm+pce2|fragment with modifyCursorKeys:2, + kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, + kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, + kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, + kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, + kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, + kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, + kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, + kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, + kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, + kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, + use=xterm+edit, + +xterm+edit|fragment for 6-key editing-keypad, + kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + use=xterm+pc+edit, + +xterm+pc+edit|fragment for pc-style editing keypad, + kend=\E[4~, khome=\E[1~, + +xterm+vt+edit|fragment for vt220-style editing keypad, + kfnd=\E[1~, kslt=\E[4~, + +# These variations for alternate-screen and title-stacking were introduced by +# xterm patch #331: +xterm+noalt|xterm without altscreen, + rmcup@, smcup@, + +xterm+alt1049|xterm 90 feature, + rmcup=\E[?1049l, smcup=\E[?1049h, + +xterm+titlestack|xterm 251 feature, + rmcup=\E[23;0;0t, smcup=\E[22;0;0t, + +xterm+alt+title|xterm 90 and 251 features combined, + rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t, +# +# Those chunks use the new-style (the xterm oldFunctionKeys resource is false). +# Alternatively, the same scheme with old-style function keys as in xterm-r6 +# is shown here (because that is used in mrxvt and mlterm): +xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, + kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, + kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, + kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, + kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, + kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, + kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, + kf63=\E[13;4~, use=xterm+pcf2, +# +# This chunk is used for building the VT220/Sun/PC keyboard variants. +xterm-basic|modern xterm terminal emulator - common, + OTbs, am, bce, km, mir, msgr, xenl, AX, XT, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El, + memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, + rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; + %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, + sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics, + use=ansi+pp, use=xterm+kbs, use=xterm+alt+title, + use=ansi+enq, -# ====================================================================== -# Entries for GNU Screen with 16 colors. -# Those variations permit to benefit from 16 colors palette, and from -# bold font and blink attribute separated from bright colors. But they -# are less portable than the generic "screen" 8 color entries: Their -# usage makes real sense only if the terminals you attach and reattach -# do all support 16 color palette. +# From: David J. MacKenzie , 14 Nov 1997 +# In retrospect, something like xterm-r6 was intended here -TD +xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, + rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, -screen-16color|GNU Screen with 16 colors, - use=ibm+16color, use=screen, +#### XTERM Colors -screen-16color-s|GNU Screen with 16 colors and status line, - use=ibm+16color, use=screen-s, +# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 +# (T.Dickey) +# +# If configured to support 88- or 256-colors (which is fairly common in 2009), +# xterm also recognizes the control sequences for initc -TD +xterm-16color|xterm with 16 colors like aixterm, + ccc, + initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* + %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, + oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color, + use=xterm-new, -screen-16color-bce|GNU Screen with 16 colors and BCE, - use=ibm+16color, use=screen-bce, +# 256-colors is a compile-time feature of XFree86 xterm beginning with +# xterm patch #111 (1999/7/10) -TD +xterm+256color|xterm 256-color feature, + ccc, + colors#0x100, pairs#0x10000, + initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* + %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, + oc=\E]104\007, + setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; + 5;%p1%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 + ;%p1%d%;m, + setb@, setf@, -screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line, - bce, use=ibm+16color, use=screen-s, +# palette is hardcoded... +xterm+256setaf|xterm 256-color (set-only), + ccc@, + colors#0x100, pairs#0x10000, + initc@, op=\E[39;49m, + setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; + 5;%p1%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 + ;%p1%d%;m, + setb@, setf@, -# ====================================================================== -# Entries for GNU Screen 4.02 with --enable-colors256. +# 88-colors is a compile-time feature of XFree86 xterm beginning with +# xterm patch #115 (1999/9/18) -TD +# +# Note that the escape sequences used are the same as for 256-colors - xterm +# has a different table of default color resource values. If built for +# 256-colors, it can still handle an 88-color palette by using the initc +# capability. +# +# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals +# which support the xterm+256color feature support the associated initc +# capability. So it is cancelled in the entries which use this and/or the +# xterm+256color block. +# +# The default color palette for the 256- and 88-colors are different. A +# given executable will have one palette (perhaps compiled-in). If the program +# supports xterm's control sequence, it can be programmed using initc. +xterm+88color|xterm 88-color feature, + colors#88, pairs#7744, use=xterm+256color, -screen-256color|GNU Screen with 256 colors, - ccc@, - initc@, use=xterm+256color, use=screen, +# These variants of XFree86 3.9.16 xterm are built as a configure option. +xterm-256color|xterm with 256 colors, + rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new, +xterm-88color|xterm with 88 colors, + rs1=\Ec\E]104\007, use=xterm+88color, + use=xterm-256color, + +# Emacs 26.1 and later support direct color mode in terminals, using a +# combination of user-defined capabilities and ncurses-dependent function +# calls. We will not include that here. +# +# Here is a first revision, which (disregarding the reuse of colors 1-7 which +# is of interest only to the numerically illiterate), is compatible with other +# terminal descriptions written for curses. It relies upon the extended range +# for numeric capabilities provided in ncurses 6.1: +xterm+direct2|xterm with direct-color indexing, + RGB, + colors#0x1000000, pairs#0x10000, + initc@, op=\E[39;49m, + setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1 + %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1 + %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m, + setb@, setf@, +xterm-direct2|xterm with direct-color indexing (old), + use=xterm+direct2, use=xterm+titlestack, use=xterm, + +# That in turn had a problem: in the original patch submitted for KDE konsole +# in 2006, the submitter and the developer alike overlooked a "color space +# identifier" parameter. This version provides for that parameter: +xterm+direct|xterm with direct-color indexing, + RGB, + colors#0x1000000, pairs#0x10000, + initc@, op=\E[39;49m, + setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1 + %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1 + %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m, + setb@, setf@, +xterm-direct|xterm with direct-color indexing, + use=xterm+direct, use=xterm, + +# Here are corresponding flavors for terminals which could use the feature: +iterm2-direct|iTerm2 with direct-color indexing, + use=xterm+direct, use=iterm2, +mlterm-direct|mlterm with direct-color indexing, + use=xterm+direct, use=mlterm, + +# Meanwhile, in KDE #107487, the patch submitter and the developer both saw +# that xterm's original implementation should have used colons for the +# subparameter separators, but chose not to correct this in konsole. As of +# late 2017, konsole still accepts only the nonstandard semicolon delimiters. +xterm+indirect|xterm with direct-color indexing (old), + RGB, + colors#0x1000000, pairs#0x10000, + initc@, op=\E[39;49m, + setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256} + %/%{255}%&%d;%p1%{255}%&%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256} + %/%{255}%&%d;%p1%{255}%&%d%;m, + setb@, setf@, +konsole-direct|konsole with direct-color indexing, + use=xterm+indirect, use=konsole, +st-direct|st with direct-color indexing, + use=xterm+indirect, use=st, +vte-direct|vte with direct-color indexing, + use=xterm+indirect, use=vte, + +# As for others: +# + Apple's Terminal.app does not recognize either form of the direct-color +# sequences. +# + Cygwin's mintty recognizes xterm's original implementation, does okay with +# the colors. Like vte, it is a subset of xterm, although different +# omissions/reservations of modified-keys are seen in testing. +# + PuTTY 0.70 seems to recognize xterm's original implementation but does +# nothing useful with the colors. +# + Teraterm 4.97, like PuTTY (no good). +# + terminology 0.91 recognizes xterm's original implementation, but does +# nothing useful with it. + +#### XTERM Features + +# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who +# asked for some of xterm's advanced features to be added to its terminfo +# entry. It defines extended capabilities not found in standard terminfo or +# termcap. These are useful in tmux, for instance, hence the name. +# +# One caveat in adding extended capabilities in ncurses is that if the names +# are longer than two characters, then they will not be visible through the +# termcap interface. +# +# Ms modifies the selection/clipboard. Its parameters are +# p1 = the storage unit (clipboard, selection or cut buffer) +# p2 = the base64-encoded clipboard content. +# +# Ss is used to set the cursor style as described by the DECSCUSR +# function to a block or underline. +# Se resets the cursor style to the terminal power-on default. +# +# Cs and Cr set and reset the cursor colour. +xterm+tmux|advanced xterm features used in tmux, + Cr=\E]112\007, Cs=\E]12;%p1%s\007, + Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, -screen-256color-s|GNU Screen with 256 colors and status line, - ccc@, - initc@, use=xterm+256color, use=screen-s, +# This is another variant, for XFree86 4.0 xterm (T.Dickey) +# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. +# To use it, your decTerminalID resource must be set to 200 or above. +# +# HTS \E H \210 +# RI \E M \215 +# SS3 \E O \217 +# CSI \E [ \233 +# +xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), + OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, + civis=\233?25l, clear=\233H\2332J, + cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr, + cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n, + cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, + cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, + dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, + ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, + flash=\233?5h$<100/>\233?5l, home=\233H, + hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, + il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m, + is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r + \E8, + ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q, + kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, + kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, + kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, + kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, + kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, + kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, + kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, + kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, + knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, + meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, + ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, + rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, + rs1=\Ec, + rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r + \E8, + sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, + setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1 + %{6}%=%t3%e%p1%d%;m, + setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1 + %{6}%=%t3%e%p1%d%;m, + sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p7%t;8%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, + smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, + smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, + u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c, + vpa=\233%i%p1%dd, use=xterm+kbs, -screen-256color-bce|GNU Screen with 256 colors and BCE, - ccc@, - initc@, use=xterm+256color, use=screen-bce, +xterm-hp|xterm with hpterm function keys, + kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, + kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, + knp=\ES, kpp=\ET, use=xterm-basic, -screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line, - bce, ccc@, - initc@, use=xterm+256color, use=screen-s, +xterm-sco|xterm with SCO function keys, + kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, + kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, + kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, + kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, + kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, + kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, + kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, + kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, + kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, + kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, + kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, + use=xterm-basic, -# ====================================================================== +# The xterm-new description has all of the features, but is not completely +# compatible with vt220. If you are using a Sun or PC keyboard, set the +# sunKeyboard resource to true: +# + maps the editing keypad +# + interprets control-function-key as a second array of keys, so a +# 12-fkey keyboard can support vt220's 20-fkeys. +# + maps numeric keypad "+" to ",". +# + uses DEC-style control sequences for the application keypad. +# +xterm-vt220|xterm emulating vt220, + kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, + use=xterm+app, use=xterm+edit, use=xterm-basic, + use=vt220+keypad, -# Read the fine manpage: -# When screen tries to figure out a terminal name for -# itself, it first looks for an entry named "screen.", -# where is the contents of your $TERM variable. If -# no such entry exists, screen tries "screen" (or "screen-w" -# if the terminal is wide (132 cols or more)). If even this -# entry cannot be found, "vt100" is used as a substitute. +xterm-vt52|xterm emulating dec vt52, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, + home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF, + use=xterm+kbs, + +xterm-noapp|xterm with cursor keys in normal mode, + rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, + use=xterm, + +xterm-24|vs100|xterms|xterm terminal emulator (X Window System), + lines#24, use=xterm-old, + +# This is xterm for ncurses. +xterm|xterm terminal emulator (X Window System), + use=xterm-new, + +# This entry assumes that xterm's handling of VT100 SI/SO is disabled by +# setting the vt100Graphics resource to false. +xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, + U8#1, use=xterm, + +# These building-blocks allow access to the X titlebar and icon name as a +# status line. There are a few problems in using them in entries: # -# Here are a few customized entries which are useful -TD +# a) tsl should have a parameter to denote the column on which to transfer to +# the status line. +# b) the "0" code for xterm updates both icon-title and window title. Some +# window managers such as twm (and possibly window managers descended from +# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you +# don't want to mess with icon-name when using those window managers. # -# Notes: -# (a) screen does not support invis. -# (b) screen's implementation of bw is incorrect according to tack. -# (c) screen appears to hardcode the strings for khome/kend, making it -# necessary to override the "use=" clause's values. -# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, -# which is NOT the same as the terminfo screen.. -# (e) when screen finds one of these customized entries, it sets $TERM to -# match. Hence, no "screen.xterm" entry is provided, since that would -# create heartburn for people running remote xterm's. +# The extension "TS" is preferable, because it does not accept a parameter. +# However, if you are using a non-extended terminfo, "TS" is not visible. +xterm+sl|access X title line and icon name, + hs, + dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;, +xterm+sl-twm|access X title line (pacify twm-descended window managers), + hs, + dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;, + +# In contrast, this block can be used for a DEC vt320 and up. There are two +# controls used. # -# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV -# since the default translations override the built-in keycode -# translation. They are suppressed here to show what is tested by tack. -screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, - bce@, bw, - invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@, - memu@, - sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, - use=xterm-new, -# xterm-r6 does not really support khome/kend unless it is propped up by -# the translations resource. -screen.xterm-r6|screen customized for X11R6 xterm, - bw, use=xterm-r6, -# Color applications running in screen and TeraTerm do not play well together -# on Solaris because Sun's curses implementation gets confused. -screen.teraterm|disable ncv in teraterm, - ncv#127, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - use=screen, -# fix the backspace key -screen.linux|screen in linux console, - bw, - kbs=\177, kcbt@, use=screen, +# DECSASD (select active status display) +# \E[0$} Main display +# \E[1$} Status line +# +# DECSSDT (select status line type) +# \E[0$~ No status line +# \E[1$~ Indicator status line +# \E[2$~ Host-writable status line +# +# The building block assumes that the terminal always shows something at the +# status line (either the indicator, or status line). That is because if no +# status line is used, then the terminal makes that line part of the user +# window, changing its size without notice. +# +# Because there is no "esl" (enable status line) capability, the "tsl" +# capability ensures that the status line is host-writable. A DEC terminal +# will clear the status line when changing from indicator to host-writable +# mode. +# +# Once on the status line, the row part of cursor addressing is ignored. Since +# tsl expects a parameter (to specify the column), the shortest addressing that +# can be used for this purpose is HPA, e.g., \E[5d to go to column 5. +# +dec+sl|DEC VTxx status line, + eslok, hs, + dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`, -screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, - cols#132, use=screen, +# +# The following xterm variants don't depend on your base version +# +# xterm with bold instead of underline +xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, + sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%| + %t;7%;m, + smso=\E[7m, smul=\E[1m, use=xterm-old, -screen2|old VT 100/ANSI X3.64 virtual terminal, - cols#80, it#8, lines#24, - cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, - il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, - kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, - nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, - rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, - smso=\E[3m, smul=\E[4m, tbc=\E[3g, -# (screen3: removed unknown ":xv:LP:G0:" -- esr) -screen3|older VT 100/ANSI X3.64 virtual terminal, - km, mir, msgr, - cols#80, it#8, lines#24, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, - cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, - kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, - rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, - sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, - smul=\E[4m, tbc=\E[3g, +# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file +xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, + ich@, ich1@, use=xterm, +# From: Mark Sheppard , 4 May 1996 +xterm1|xterm terminal emulator ignoring the alternate screen buffer, + rmcup@, smcup@, use=xterm, -# Francesco Potorti : -# NCSA telnet is one of the most used telnet clients for the Macintosh. It has -# been maintained until recently by the National Center for Supercomputer -# Applications, and it is feature rich, stable and free. It can be downloaded -# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, -# xterm+sl, and the docs at NCSA. It works well. -# -# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode -# The terminal options should be set as follows: -# Xterm sequences ON -# use VT wrap mode ON -# use Emacs arrow keys OFF -# CTRL-COMND is Emacs meta ON -# 8 bit mode ON -# answerback string: "ncsa-vt220-8" -# setup keys: all disabled -# -# Application mode is not used. -# -# Other special mappings: -# Apple VT220 -# HELP Find -# HOME Insert here -# PAGEUP Remove -# DEL Select -# END Prev Screen -# PAGEDOWN Next Screen -# -# Though it supports ANSI color, NCSA Telnet uses color to represent blinking -# text. -# -# The status-line manipulation is a mapping of the xterm-compatible control -# sequences for setting the window-title. So you must use tsl and fsl in -# pairs, since the latter ends the string that is loaded to the window-title. -ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, - am, hs, km, mir, msgr, xenl, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, - flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, - ich=\E[%p1%d@, if=/usr/share/tabset/vt100, - il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, - is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, - kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, - kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, - kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, - khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, - rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, - rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, - rmso=\E[27m, rmul=\E[24m, - rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, - smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, - u8=\E[?62;1;6c, use=ansi+enq, -ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, - use=ncsa-m, use=klone+color, -ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, - hs@, - dsl@, fsl@, tsl@, use=ncsa, -ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, - hs@, - dsl@, fsl@, tsl@, use=ncsa-m, -# alternate -TD: -# The documented function-key mapping refers to the Apple Extended Keyboard -# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style -# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on -# some keyboards and many applications require these as F1-F4. -# -ncsa-vt220|NCSA Telnet using vt220-compatible function keys, - kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, - kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, - kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, use=ncsa, +#### XTERM Mouse +# The xterm mouse protocol is used by other terminal emulators. +# In this section, two extended capabilities are used to illustrate the mouse +# protocol: XM and xm. The "XM" capability is recognized by ncurses to allow +# enabling/disabling other mouse protocols. The "xm" capability describes the +# mouse response; currently there is no interpreter which would use this +# information to make the mouse support completely data-driven. + +# Here is the "original" xterm mouse protocol. +# +# First seen in X10.3, February 1986, this likely dates from 1985 based on the +# copyright dates in the sources. A comment in charproc.c notes "MIT bogus +# sequence", referring to the fact that it does not correspond to a "real" +# terminal. The mouse responses for the X10 protocol are sent only for +# button-presses. +xterm+x10mouse|X10 xterm mouse protocol, + kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;, + xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c, +xterm-x10mouse|X10 xterm mouse, + use=xterm+x10mouse, use=xterm, + +# Here is the conventional xterm mouse protocol, introduced with X11R1 in +# September 1987. +# +# The mouse responses for the X11 protocol covered button releases, as well as +# modifiers: +# shift 4 +# alt/meta 8 (technically the "mod1" mask, because X11 has no such keys) +# control 16 +# +# The modifiers are not reflected in this description because as used in xterm +# they are normally inaccessible because the translations resources assign +# shift and control to other features. However, they are important because +# they take up space in the first byte of the response. The other bits of this +# byte are used to encode the button number for both presses and releases. +# In the X11 protocol, any button-release is encoded with "3" (the lowest 2 +# bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to +# provide additional features, e.g., wheel mouse. +# +# X11R1's xterm also supported an "emacs" mouse protocol, with final character +# "t" or "T", which was activated by double-clicking. The "t" response was +# used when the starting/ending positions were the same. +# +# X11R3 (February 1988) added the highlight/tracking mode. +# +# X11R4 (December 1989) added the control sequences document, listing the +# control sequences for the X10/X11 protocols without descriptions. It also +# mentioned the "emacs" ("T") response. Comments in button.c referred to the +# X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal. +# +# X11R5 (November 1993) gave a description of the mouse protocol. +# +# X11R6 (January 1995) moved the control sequences document out of the xterm +# source-directory to xc/doc/specs/xterm, polishing the formatting but adding +# no new information. +xterm+x11mouse|X11 xterm mouse protocol, + kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;, + xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c, +xterm-x11mouse|X11 mouse, + use=xterm+x11mouse, use=xterm, + +# Here is a suggested description of the xterm highlighting protocol. +# A more complicated example could be constructed to account for the "t" +# response. +xterm+x11hilite|X11 xterm mouse protocol with highlight, + kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;, + xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c + %p1%'!'%+%cT, +xterm-x11hilite|X11 mouse with highlight, + use=xterm+x11mouse, use=xterm, + +# The preceding were the sources from X Consortium. Other sources (or patches) +# were available. Starting in mid-1995, XFree86 developers collected some of +# those changes and began improvements, e.g., to support color. This was, by +# the way, around the same time that rxvt developers began implementing color, +# though dates (and attributions) are not well documented. I became interested +# in xterm in late 1995, and involved in early 1996. To complete the picture, +# CDE's dtterm was introduced around the same time, with no mouse protocol -TD + +# xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an +# "any-event" mouse mode. +xterm+sm+1002|xterm any-event mouse, + kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;, +xterm-1002|xterm any-event mouse, + use=xterm+sm+1002, use=xterm, + +xterm+sm+1003|testing xterm-mouse, + kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;, -#### Pilot Pro Palm-Top -# -# Termcap for Top Gun Telnet and SSH on the Palm Pilot. -# http://www.ai/~iang/TGssh/ -pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, - OTbs, am, xenl, - cols#39, lines#16, - bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, - cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, - ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, - rmso=\EB, smso=\Eb, +xterm-1003|testing xterm-mouse, + use=xterm+sm+1003, use=xterm, + +# xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC +# locator mode. + +# xterm patch #120 (1999/10/28) added my change to support wheel mouse, by +# dropping support for the X11 mouse protocol's shift-modifier and using +# available bits in the first byte of the response to encode buttons 4 and 5. +# xterm patch #126 (2000/2/8) amended that change to avoid conflicting with +# older configurations which might have used the obsolete modifiers. + +# xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode +# where the coordinates in the mouse response would be encoded in UTF-8, +# thereby extending the range of coordinates past 222=(255-33). This is the +# "1005" mouse mode. +xterm+sm+1005|xterm UTF-8 mouse, + kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;, + xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u, +xterm-1005|xterm UTF-8 mouse, + use=xterm+sm+1005, use=xterm, + +# xterm patch #277 (2012/1/7) provides a mode where the mouse response uses +# SGR-style parameters. +# +# Someone stated that the 1005 mouse mode would not be handled properly in luit. +# (By the way, this is a problem with the X11 protocol). A more plausible +# criticism is that the responses provided by the 1005 mode are not distinct +# from the non-1005 responses. +# +# As an alternative (and fixing the longstanding limitation of X11 mouse +# protocol regarding button-releases), I provided this: +xterm+sm+1006|xterm SGR-mouse, + kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;, + xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;, +xterm-1006|xterm SGR-mouse, + use=xterm+sm+1006, use=xterm, + +#### KTERM +# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) +# (kterm should not invoke DEC Graphics as the alternate character set +# -- Kenji Rikitake) +# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics +# -- MATSUMOTO Shoji) +# kterm implements acsc via built-in table of X Drawable's +kterm|kterm kanji terminal emulator (X window system), + eslok, hs, XT, + ncv@, + acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, + csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, + kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e + \E(B%;, + sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, + tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, +kterm-color|kterm-co|kterm with ANSI colors, + ncv@, use=kterm, use=ecma+color, -# From: Federico Bianchi -# These entries are for the Embeddable Linux Kernel System (ELKS) -# project - an heavily stripped down Linux to be run on 16 bit -# boxes or, eventually, to be used in embedded systems - and have been -# adapted from the stock ELKS termcap. The project itself looks stalled, -# and the latest improvements I know of date back to March 2000. -# -# To cope with the ELKS dumb console I added an "elks-glasstty" entry; -# as an added bonus, this deals with all the capabilities common to -# both VT52 and ANSI (or, eventually, "special") modes. +#### Other XTERM -elks-glasstty|ELKS glass-TTY capabilities, - OTbs, am, - cols#80, it#8, lines#25, - bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, - nel=^M^J, +# These (xtermc and xtermm) are distributed with Solaris. They refer to a +# variant of xterm which is apparently no longer supported, but are interesting +# because they illustrate SVr4 curses mouse controls - T.Dickey +xtermm|xterm terminal emulator (monocrome), + OTbs, am, km, mir, msgr, xenl, + btns#3, cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, + kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, + knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, + rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, + smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, -elks-vt52|ELKS vt52 console, - clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, - home=\EH, use=elks-glasstty, +xtermc|xterm terminal emulator (color), + colors#8, ncv#7, pairs#64, + op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + use=xtermm, -elks-ansi|ELKS ANSI console, - clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, - rmso=\E[m, smso=\E[7m, use=elks-glasstty, +# From: David J. MacKenzie 20 Apr 1995 +# Here's a termcap entry I've been using for xterm_color, which comes +# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the +# color stuff, I also have a status line defined as the window manager +# title bar. [I have translated it to terminfo -- ESR] +xterm-pcolor|xterm with color used for highlights and status line, + wsl#40, + bold=\E[1;43m, rev=\E[7;34m, + sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1 + %t;7;31%;%?%p3%t;7;34%;m, + smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6, -# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation -# instead of VT52, but the "elks" entry still refers to the latter. +# This describes the capabilities of color_xterm, an xterm variant from +# before ECMA-64 color support was folded into the main-line xterm release. +# This entry is straight from color_xterm's maintainer. +# From: Jacob Mandelson , 09 Nov 1996 +# The README's with the distribution also say that it supports SGR 21, 24, 25 +# and 27, but they are not present in the terminfo or termcap. +color_xterm|cx|cx100|color_xterm color terminal emulator for X, + OTbs, am, km, mir, msgr, xenl, XT, + cols#80, it#8, lines#65, ncv@, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, + is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, + rmso=\E[27m, rmul=\E[24m, + rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, + smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, + smul=\E[4m, use=ecma+color, use=vt220+keypad, -elks|default ELKS console, - use=elks-vt52, +# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of +# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support +# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This +# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except +# that each of those implements the home, end, delete keys differently. +# +# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce +# colors; note that this is not compatible with the 5.2 version. +# csw (2002-05-15): make xterm-color primary instead of nxterm, to +# match XFree86's xterm.terminfo usage and prevent circular links +xterm-color|nxterm|generic color xterm, + ncv@, + op=\E[m, use=xterm-r6, use=klone+color, -# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS -# one but in screen size +# This entry describes an xterm with Sun-style function keys enabled +# via the X resource setting "xterm*sunFunctionKeys:true" +# To understand / note that L1,L2 and F11,F12 are the same. +# The ... keys are L3-L10. We don't set +# because we want it to be seen as . +# The ... keys are R1-R15. We treat some of these in accordance +# with their Sun keyboard labels instead. +# From: Simon J. Gerraty 10 Jan 1996 +xterm-sun|xterm with sunFunctionKeys true, + kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, + kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, + kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, + kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, + kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, + kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, + kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, + kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, + kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, + kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, + kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, + use=xterm-basic, +xterms-sun|small (80x24) xterm with sunFunctionKeys true, + cols#80, lines#24, use=xterm-sun, -sibo|ELKS SIBO console, - cols#61, it#8, lines#20, use=elks-vt52, +#### GNOME (VTE) +# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 +gnome-rh62|Gnome terminal, + bce, + kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + use=xterm-color, -######## COMMERCIAL WORKSTATION CONSOLES +# GNOME Terminal 1.4.0.4 (Redhat 7.2) # - -#### Alpha consoles +# This implements a subset of vt102 with a random selection of features from +# other terminals such as color and function-keys. # +# shift-f1 to shift-f10 are f11 to f20 +# +# NumLock changes the application keypad to approximate vt100 keypad, except +# that there is no escape sequence matching comma (,). +# +# Other defects observed: +# vt100 LNM mode is not implemented. +# vt100 80/132 column mode is not implemented. +# vt100 DECALN is not implemented. +# vt100 DECSCNM mode is not implemented, so flash does not work. +# vt100 TBC (tab reset) is not implemented. +# xterm alternate screen controls do not restore cursor position properly +# it hangs in tack after running function-keys test. +gnome-rh72|GNOME Terminal, + bce, km@, + civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e + \017%;, + sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, -# This is from the OSF/1 Release 1.0 termcap file -pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, - am, xon, - cols#80, lines#25, - bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, - nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, - -#### Sun consoles +# GNOME Terminal 2.0.1 (Redhat 8.0) +# +# Documentation now claims it implements vt220 (which is demonstrably false). +# However, it does implement ECH, which is a vt220 feature. And there are +# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display +# more of its bugs using vttest. # +# However, note that bce and msgr are broken in this release. Tabs (tbc and +# hts) are broken as well. Sometimes flash (as in xterm-new) works. +# +# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu +# operations. Shift-tab generates a distinct sequence so it can be argued +# that it implements kcbt. +gnome-rh80|GNOME Terminal, + bce@, msgr@, + ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?, + kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, -# :is1: resets scrolling region in case a previous user had used "tset vt100" -oldsun|Sun Microsystems Workstation console, - OTbs, am, km, mir, msgr, - cols#80, it#8, lines#34, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, - dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, - ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, - is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, - rmso=\E[m, sgr0=\E[m, smso=\E[7m, -# From: Alexander Lukyanov , 14 Nov 1995 -# capability later corrected by J.T. Conklin -# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) -sun-il|Sun Microsystems console with working insert-line, - am, km, msgr, - cols#80, lines#34, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, - dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, - ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, - kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, - kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, - kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, - kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, - knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z, - kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s, - sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m, - u8=\E[1t, u9=\E[11t, -# On some versions of CGSIX framebuffer firmware (SparcStation 5), / -# flake out on the last line. Unfortunately, without them the terminal has no -# way to scroll. -sun-cgsix|sun-ss5|Sun SparcStation 5 console, - il@, il1@, use=sun-il, -# If you are using an SS5, change the sun definition to use sun-ss5. -sun|sun1|sun2|Sun Microsystems Inc. workstation console, - use=sun-il, +# GNOME Terminal 2.2.1 (Redhat 9.0) +# +# bce and msgr are repaired. +gnome-rh90|GNOME Terminal, + bce, msgr, XT, + hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, + kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, + vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, + use=gnome-rh80, -# From: Tue Sep 24 13:14:44 1985 -sun-s|Sun Microsystems Workstation window with status line, - hs, - dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, -sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, - hs, - dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, -sun-48|Sun 48-line window, - cols#80, lines#48, use=sun, -sun-34|Sun 34-line window, - cols#80, lines#34, use=sun, -sun-24|Sun 24-line window, - cols#80, lines#24, use=sun, -sun-17|Sun 17-line window, - cols#80, lines#17, use=sun, -sun-12|Sun 12-line window, - cols#80, lines#12, use=sun, -sun-1|Sun 1-line window for sysline, - eslok, hs, - cols#80, lines#1, - dsl=^L, fsl=\E[K, tsl=^M, use=sun, -sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, - ich1@, rmir@, smir@, use=sun, -sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, - lines#35, - rmcup=\E[>4h, smcup=\E[>4l, use=sun, -sun-type4|Sun Workstation console with type 4 keyboard, - kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, - kcuu1=\E[215z, use=sun-il, +# GNOME Terminal 2.14.2 (Fedora Core 5) +# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. +gnome-fc5|GNOME Terminal, + rs1=\Ec, + rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l + \E[?25h, + use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, -# Most of the current references to sun-color are from users wondering why this -# is the default on install. Details from reading the wscons manpage, adding -# cub, etc., here (rather than in the base sun-il entry) since it is not clear -# when those were added -TD -sun-color|Sun Microsystems Workstation console with color support (IA systems), - colors#8, pairs#64, - cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, - cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm, - setaf=\E[3%p1%dm, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - use=sun, +# GNOME Terminal 2.18.1 (2007 snapshot) +# +# For any "recent" version of gnome-terminal, it is futile to attempt to +# support modifiers on cursor- and keypad keys because the program usually +# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset +# of the keys (which more/less correspond to the termcap values), and will +# interpret those according to the $TERM value, but others not in the +# terminfo according to some constantly changing set of hacker guidelines -TD +vte-2007|VTE in GNOME Terminal snapshot 2.18.1, + use=xterm+pcc2, use=gnome-fc5, +gnome-2007|GNOME Terminal snapshot 2.18.1, + use=vte-2007, + +# GNOME Terminal 2.22.3 (2008 snapshot) +# +# In vttest, it claims to be a vt220 with national replacement character-sets, +# but aside from the identifier string, implements only a small fraction of +# vt220's behavior, which will make it less usable on a VMS system (unclear +# what the intent of the developer is, since the NRC feature exposed in vttest +# by this change does not work). +vte-2008|VTE in GNOME Terminal snapshot 2.22.3, + use=vte+pcfkeys, use=vte-2007, +gnome-2008|GNOME Terminal snapshot 2.22.3, + use=vte-2008, + +# GNOME Terminal 3.6.0 (2012) +# VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied +# in ncurses). It inherited from gnome-fc5, which broke the modified forms +# of f1-f4 -TD +# +# Testing with tack shows that flash does not/has not worked -TD +vte-2012|VTE 0.34.1, + ncv#16, + dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3 + %|%t;7%;m%?%p9%t\016%e\017%;, + use=ecma+italics, use=vte-2008, +# Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has +# 61 differences from a correct entry for gnome terminal. +gnome-2012|GNOME Terminal 3.6.0, + use=vte-2012, + +# Before 2008, GNOME terminal could automatically use the contents of the +# "xterm" terminfo to supply key information which is not built into the +# program. With 2.22.3, this list was built into the program (which addressed +# the inadvertent use of random terminfo data, though using a set of values +# which did not correspond to any that xterm produced - still not solving the +# problem that GNOME terminal hardcoded the $TERM variable as "xterm"). +# +# terminfo modifier code keys +# kf13-kf24 shift 2 F1 to F12 +# kf25-kf36 control 5 F1 to F12 +# kf37-kf48 shift/control 6 F1 to F12 +# kf49-kf60 alt 3 F1 to F12 +# kf61-kf63 shift-alt 4 F1 to F3 +# +# The parameters with \EO (SS3) are technically an error, since SS3 should have +# no parameters. This appears to be rote copying based on xterm+pcc0. +vte+pcfkeys|VTE's variation on xterm+pcfkeys, + kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, + kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q, + kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P, + kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S, + kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, + kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, + use=xterm+pcfkeys, +gnome+pcfkeys|VTE's variation on xterm+pcfkeys, + use=vte+pcfkeys, + +# deprecated - use "vte" for newer versions +gnome|GNOME Terminal, + use=vte-2012, +gnome-256color|GNOME Terminal with xterm 256-colors, + use=xterm+256color, use=gnome, + +# relevant changes were made in January 2014, and later. +# +# Originally VTE was promoted as a library able to emulate any terminal by +# reading its terminal description. In practice, that never got beyond the +# ability to read definitions of special keys (function-, editing-, cursor). +# +# Before 2014, VTE had a termcap reader (originally pointing to a private copy +# of a termcap file derived from xterm). That was incomplete because it did +# not have any of the modifier-key information used for xterm's function-, +# editing-, and cursor-keys. Having its own reader was unnecessary since +# ncurses provides that information; used since xterm patch #225 in 2007. +# +# During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900, +# gnome #730137) dealt with attempts to recast that termcap reader as library +# calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c), +# abandoning that and finally constructing a table to match xterm's default +# behavior, e.g., for "xterm+pcfkeys". +vte-2014|VTE 0.35.1, + ncv@, + cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, + ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT, + use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012, -#### Iris consoles -# +# As of January 2018, this was the most recent release, +# e.g., with gnome-terminal 3.26.2 +vte-2017|VTE 0.50.2, + use=ecma+strikeout, use=vte-2014, -# (wsiris: this had extension capabilities -# :HS=\E7F2:HE=\E7F7:\ -# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: -# See the note on Iris extensions near the end of this file. -# Finally, removed suboptimal =\EH\EJ and added & -# from BRL -- esr) -wsiris|iris40|iris emulating a 40 line visual 50 (approximately), - OTbs, OTnc, OTpt, am, - OTkn#3, cols#80, it#8, lines#40, - OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, - cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, - cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, - flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, - ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, - kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, - rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, - smul=\E7R2\E9P, +# VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY +# late in 2017 for changing the appearance of underlines, which was +# incorporated into Debian and Fedora testing-packages in February and March +# 2018, respectively. +vte-2018|VTE 0.51.2, + Smulx=\E[4\:%p1%dm, use=vte-2017, -#### NeWS consoles -# -# Console terminal windows under the NeWS (Sun's Display Postscript windowing -# environment). Note: these have nothing to do with Sony's News workstation -# line. -# +vte|VTE aka GNOME Terminal, + use=vte-2018, -# Entry for NeWS's psterm from Eric Messick & Hugh Daniel -# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) -psterm|psterm-basic|NeWS psterm-80x34, - OTbs, am, hs, km, ul, - cols#80, it#8, lines#34, - blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, - cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, - dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, - home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, - ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], - sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, - tsl=\EOl, -psterm-96x48|NeWS psterm 96x48, - cols#96, lines#48, use=psterm, -psterm-90x28|NeWS psterm 90x28, - cols#90, lines#28, use=psterm, -psterm-80x24|NeWS psterm 80x24, - cols#80, lines#24, use=psterm, -# This is a faster termcap for psterm. Warning: if you use this termcap, -# some control characters you type will do strange things to the screen. -# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) -psterm-fast|NeWS psterm fast version (flaky ctrl chars), - OTbs, am, hs, km, ul, - cols#80, it#8, lines#34, - blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, - cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, - dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, - il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, - rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, - smso=^Oo, smul=^Ou, tsl=^Ol, +vte-256color|VTE with xterm 256-colors, + use=xterm+256color, use=vte, -#### NeXT consoles -# -# Use `glasstty' for the Workspace application +# XFCE Terminal 0.2.5.4beta2 # +# This is based on some of the same source code, e.g., the VTE library, as +# gnome-terminal, but has fewer features, fails more screens in vttest. +# Since most of the terminfo-related behavior is due to the VTE library, +# the terminfo is the same as gnome-terminal. +xfce|Xfce Terminal, + use=vte-2008, + +# TERMITE +# +# https://github.com/thestinger/termite +# +# A review requires install of Arch Linux since Fedora and Debian don't have +# this program. It uses "vte3-ng" (a conflicting package), which is here: +# https://github.com/thestinger/vte-ng +# which (based on the default branch setting) seems to be a fork of vte +# 0.48.2, and is noted as such in Arch: +# https://www.archlinux.org/packages/community/x86_64/vte3-ng/ +# It won't be merged: +# https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10 +# https://bugzilla.gnome.org/show_bug.cgi?id=78291 +# but perhaps made obsolete. +# +# The entry as given was mislabeled "xterm-termite" (it is not xterm), and +# was mostly cut/paste from xterm-256color, but since VTE does not actually +# implement several of the features in that terminal description, this one is +# trimmed to eliminate those. Also, since it is a slightly older version of +# VTE, it lacks a few more features (again, trimmed). +termite|VTE-based terminal, + am, ccc, km, mir, msgr, npc, xenl, + cols#80, it#8, lines#24, ncv@, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, + bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ind=\n, indn=\E[%p1%dS, invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z, + kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, + rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;%?%p7%t;8%;m, + sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%i%p1%dd, use=ansi+idc, use=ansi+idl, + use=ansi+enq, use=ecma+italics, use=xterm+256color, + use=ecma+color, use=xterm+pcfkeys, use=xterm+sl-twm, -# From: Dave Wetzel 22 Dec 1995 -next|NeXT console, - am, xt, - cols#80, it#8, lines#24, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, - ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, - rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, -nextshell|NeXT Shell application, - am, - cols#80, - bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, - kcud1=^J, nel=^M^J, - -#### Sony NEWS workstations +#### Other GNOME +# Multi-Gnome-Terminal 1.6.2 # +# This does not use VTE, and does have different behavior (compare xfce and +# gnome). +mgt|Multi GNOME Terminal, + indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, -# (news-unk: this had :KB=news: -- esr) -news-unk|SONY NEWS vt100 emulator common entry, - OTbs, OTpt, am, xenl, - cols#80, - OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, - cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, - ed=\E[J, el=\E[K, home=\E[H, ht=^I, - if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, - is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, - kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, - rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, - sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, +#### KDE +# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce +# or not is debatable). +kvt|KDE terminal, + bce, km@, + kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color, + +# Konsole 1.0.1 (2001/11/25) +# (formerly known as kvt) # -# (news-29: this had :TY=ascii: --esr) -news-29, - lines#29, use=news-unk, -# (news-29-euc: this had :TY=euc: --esr) -news-29-euc, - use=news-29, -# (news-29-sjis: this had :TY=sjis: --esr) -news-29-sjis, - use=news-29, +# This program hardcodes $TERM to 'xterm', which is not accurate. However, to +# simplify this entry (and point out why konsole isn't xterm), we base this on +# xterm-r6. The default keyboard appears to be 'linux'. # -# (news-33: this had :TY=ascii: --esr) -news-33, - lines#33, use=news-unk, -# (news-33-euc: this had :TY=euc: --esr) -news-33-euc, - use=news-33, -# (news-33-sjis: this had :TY=sjis: --esr) -news-33-sjis, - use=news-33, +# Notes: +# a) konsole implements several features from XFree86 xterm, though none of +# that is documented - except of course in its source code - apparently +# because its implementors are unaccustomed to reading documentation - as +# evidenced by the sparse and poorly edited documentation distributed with +# konsole. Some features such as the 1049 private mode are recognized but +# incorrectly implemented as a duplicate of the 47 private mode. +# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad +# sends PC-style escapes rather than vt100. +# c) fails vttest menu 3 (Test of character sets) because it does not properly +# parse some control sequences. Also fails vttest Primary Device Attributes +# by sending a bogus code (in the source it says it's supposed to be a +# vt220, which is doubly incorrect because it does not implement vt220 +# control sequences except for a few special cases). Treat it as a +# mildly-broken vt102. # -# (news-42: this had :TY=ascii: --esr) -news-42, - lines#42, use=news-unk, -# (news-42-euc: this had :TY=euc: --esr) -news-42-euc, - use=news-42, -# (news-42-sjis: this had :TY=sjis: --esr) -news-42-sjis, - use=news-42, -# -# NEWS-OS old termcap entry -# -# (news-old-unk: this had :KB=news:TY=sjis: --esr) -news-old-unk|SONY NEWS vt100 emulator common entry, - OTbs, OTpt, am, xenl, - cols#80, vt#3, - OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, - cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, - home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, - rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, -# -# (nwp512: this had :DE=^H:, which I think means --esr) -nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, - OTbs, - lines#40, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, - use=news-old-unk, -# -# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) -nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, - lines#42, - is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, - use=news-old-unk, -# -# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as . --esr) -nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, - OTbs, - lines#40, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, - use=news-old-unk, +# Update for konsole 1.3.2: +# The 1049 private mode works (but see the other xterm screens in vttest). +# Primary Device Attributes now returns the code for a vt100 with advanced +# video option. Perhaps that's intended to be a "mildly-broken vt102". # -# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) -nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, - OTbs, - lines#31, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, - use=news-old-unk, +# Updated for konsole 1.6.4: +# add konsole-solaris # -# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as ; --esr) -# also the alias vt100-bm. -nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, - OTbs, - lines#33, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, - use=news-old-unk, +# Updated for konsole 1.6.6: +# add control-key modifiers for function-keys, etc. # -# (nwp513-o: had :DE=^H:, I think that's ; also the alias vt100-bm --esr) -nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, - OTbs, - lines#31, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, - use=news-old-unk, +# Updated for konsole 2.3 (October 2008): +# vttest menu 1 shows that both konsole and gnome terminal do wrapping +# different from xterm (and vt100's). They have the same behavior in +# this detail, but it is unclear which copies the other. # -# (news28: this had :DE=^H:, I think that's , and :KB=nws1200: --esr) -news28|sony vt100 emulator 28 lines, - OTbs, - lines#28, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, - use=news-old-unk, +# Updated for konsole 2.12.4 (late 2013): +# add sitm/ritm # -# (news29: this had :TY=ascii:KB=nws1200:\ --esr) -news29|news28-a|sony vt100 emulator 29 lines, - lines#29, - is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, - use=news-old-unk, +# Updated for konsole 16.07 (mid 2016): +# add dim, invis, strikeout +# (also overline, which is too rarely used to provide as an extension) # -# (news511: this had :TY=sjis: --esr) -nwp511|nwp-511|nwp-511 vt100, - OTbs, OTpt, am, xenl, - cols#80, lines#24, - clear=\E[;H\E[2J$<20/>, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, - ed=\E[J$<30/>, el=\E[K$<3/>, - flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, - il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, - kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, - ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, - rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, - smso=\E[7m$<2/>, smul=\E[4m$<2/>, -# (news517: this had :TY=sjis:. --esr) -nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, - eslok, hs, - cols#80, lines#30, - OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, - is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - tsl=\E[1$}\E[;%df, use=vt200, -# (news517-w: this had :TY=sjis:. --esr) -nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, - eslok, hs, - cols#132, lines#50, - OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, - is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, - tsl=\E[1$}\E[;%df, use=vt200, +# Updated for konsole 17.12.0 (late 2017): +konsole-base|KDE console window, + bce, km@, npc, XT, + ncv@, + bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m, + ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, + hpa=\E[%i%p1%dG, indn=\E[%p1%dS, invis=\E[8m, kbs=^?, + kdch1=\E[3~, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, + kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, + kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, + rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, + rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, + use=ecma+strikeout, use=ecma+italics, use=ecma+color, + use=xterm-r6, + +# The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and +# "vt100" key-table files along with a compiled-in default key-table. +# +# The main difference between the two keytabs was that the developer equated +# "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from +# that. For the same reason, the home/end keys differ. A VT100 had none of +# that. The otherwise identical keytabs have definitions to model the VT52 +# cursor-keys and the VT100 cursor-keys with application versus normal modes. +# +# An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January +# 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were +# dropped from the install in June 2008. +# +# The default keytab added in January 2000 was originally titled "X11 R6", +# and likewise retitled to "XFree 4". +# +# A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab +# and changing backspace to ^H, removing that keytab's attempt to model the +# VT100 keypad and VT52 (KDE #20459). +# +# The developers made changes to the default and linux keytabs. Comparing +# the original and 2018 versions using diffstat: +# default: 119 added, 147 deleted, 28 unchanged +# linux: 47 added, 28 deleted, 104 unchanged +# +# Most of the change for the default keytab was to make konsole act more like +# xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749 +# (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was +# made an external file (like "linux" and "solaris"), and some further +# refinement made. But there are still flaws in the scheme. +# +# Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for +# Shift into a placeholder in the table entries. That works well if all of the +# modified keys are modified in the same way. But xterm does not do that. The +# first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad +# keys. For example, F2 sends \EOQ in both terminals because of this feature. +# But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing: +# kf14: '\E[1;2Q', '\EO2Q'. +# +# In effect, a quarter of konsole's function-keys are different from xterm. +# +# It is not a simple blunder: +# a) xterm patch #121 (November 1999), providing the first version of the +# PC-style modifiers would send \EO2Q +# b) xterm patch #216 (July 2006) amended this and other details, provided +# better documentation for the modifiers and made the behavior configurable, +# e.g., using the modifyFunctionKeys resource. The reason why it sends +# \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The +# changelog points this out as "avoid sending SS3 with parameters". +# c) That came after AnyMod was introduced, but still early enough that one +# might expect konsole's developers to followup. Twelve years later that +# has yet to happen. +# +# As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux", +# "solaris"). +konsole-linux|KDE console window with linux keyboard, + kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@, + kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@, + kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, use=konsole-base, +konsole-solaris|KDE console window with Solaris keyboard, + kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, -#### Common Desktop Environment -# +# Obsolete: x11r5.keymap +# KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm +# terminfo at the time rather than testing the code. +konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, + kend=\E[4~, khome=\E[1~, use=konsole-vt100, -# This ships with Sun's CDE in Solaris 2.5 -# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov -dtterm|CDE desktop terminal, - am, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, lm#0, ncv@, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, - ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, - ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, - kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, - kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, - kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, +# The value for kbs (see konsole-vt100) reflects local customization rather +# than the settings used for XFree86 xterm. +konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, + kend=\EOF, khome=\EOH, use=konsole+pcfkeys, + use=konsole-vt100, + +konsole+pcfkeys|konsole subset of xterm+pcfkeys, + kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0, + use=xterm+pce2, + +# Obsolete: vt100.keymap +# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but +# it is still useful for deriving the other entries, since the developer +# provided function-keys based on xterm. +konsole-vt100|KDE console window with vt100 (sic) keyboard, + kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, + kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, - rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, - sc=\E7, - sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, + khome=\E[H, use=konsole-base, -#### Non-Unix Consoles -# +# Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in +# September 2008 and removed in June 2016. The developer who removed it stated +# that it was never installed. +konsole-vt420pc|KDE console window with vt420 pc keyboard, + kbs=^H, kdch1=^?, use=konsole-vt100, + +# make a default entry for konsole +konsole|KDE console window, + use=konsole-xf4x, + +# These were written for ncurses: +konsole-16color|klone of xterm-16color, + ncv#32, use=ibm+16color, use=konsole, +konsole-256color|KDE console window with xterm 256-colors, + use=xterm+256setaf, use=konsole, + +#### MLTERM +# http://mlterm.sourceforge.net/ + +mlterm|multi lingual terminal emulator, + use=mlterm3, + +# Tested mlterm 3.2.2: +# mlterm 3.x has made changes, but they are not reflected in the included +# mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD +# 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8 +mlterm3|multi lingual terminal emulator, + kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, + use=ecma+italics, use=xterm+app, use=xterm+pcf0, + use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse, + use=mlterm2, -### EMX termcap.dat compatibility modes +# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD # -# Keypad: Home=\0G Up=\0H PrPag=\0I -# ka1,kh kcuu1 kpp,ka3 +# It is nominally a vt102 emulator, with features borrowed from rxvt and +# xterm. # -# Left=\0K 5=\0L Right=\0M -# kcub1 kb2 kcuf1 +# The function keys are numbered based on shift/control/alt modifiers, except +# that the control-modifier itself is used to spawn a new copy of mlterm (the +# "-P" option). So control/F1 to control/F12 may not be usable, depending on +# how it is configured. # -# End=\0O Down=\0P NxPag=\0Q -# kc1,kend kcud1 kc3,knp +# kf1 to kf12 \E[11~ to \E[24~ +# shift kf1 to kf12 \E[11;2~ to \E[24;2~ +# alt kf1 to kf12 \E[11;3~ to \E[24;3~ +# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ +# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) +# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ +# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ +# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ # -# Ins=\0R Del=\0S -# kich1 kdch1 +mlterm2|multi lingual terminal emulator, + am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, + is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?, + kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH, + kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~, + kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE, + op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, + rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, + sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e + \E(B%;, + sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2, + +# The insert/delete/home/end keys do not respond to modifiers because mlterm +# looks in its termcap to decide which string to send. If it used terminfo +# (when available), it could use the extended names introduced for xterm. +mlterm+pcfkeys|fragment for PC-style fkeys, + kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, + kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, + kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, + kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, + kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, + kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, + kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, + kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, + kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, + +mlterm-256color|mlterm 3.0 with xterm 256-colors, + use=xterm+256color, use=mlterm, + +#### RXVT +# From: Thomas Dickey 04 Oct 1997 +# Updated: Oezguer Kesim 02 Nov 1997 +# Notes: +# rxvt 2.21b uses +# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, +# but some applications don't work with that. +# It also has an AIX extension +# box2=lqkxjmwuvtn, +# and +# ech=\E[%p1%dX, +# but the latter does not work correctly. # -# On keyboard with 12 function keys, -# shifted f-keys: F13-F24 -# control f-keys: F25-F36 -# alt f-keys: F37-F48 -# The shift/control/alt keys do not modify each other, but alt overrides both, -# and control overrides shift. +# The distributed terminfo says it implements hpa and vpa, but they are not +# implemented correctly, using relative rather than absolute positioning. # -# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the -# no_color_video to inform the application that standout(1), underline(2) -# reverse(4) and invisible(64) don't work with color. -emx-base|DOS special keys, - bce, bw, - it#8, ncv#71, - bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, - kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, - kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, - kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, - kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, - kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, - kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, - kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, - kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, - kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, - kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, - kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, - use=ansi.sys, - -# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, -# a Unix-style environment used on OS/2. (Note that the suffix makes some -# names longer than 14 characters, the nominal maximum). +# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. +# Since rxvt is not really compatible with xterm, it should be configured as +# "rxvt" or "rxvt-color". # -# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. -ansi-emx|ANSI.SYS color, - am, bce, eo, mir, msgr, xon, - colors#8, cols#80, it#8, lines#25, pairs#64, +# removed dch/dch1 because they are inconsistent with bce/ech -TD +# remove km as per tack test -TD +rxvt-basic|rxvt terminal base (X Window System), + OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, - cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, - dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, - home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, - kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, - rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, - rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, - smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, - u9=\E[c, use=emx-base, -# nice colors for Emacs (white on blue, mode line white on cyan) -ansi-color-2-emx|ANSI.SYS color 2, - clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, - rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, - setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, - smul=\E[1;36;44m, use=ansi-emx, -# nice colors for Emacs (white on black, mode line black on cyan) -ansi-color-3-emx|ANSI.SYS color 3, - clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, - rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, - setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, - smul=\E[0;36;40m, use=ansi-emx, -mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, - am, - cols#80, it#8, lines#24, - clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, - ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, - kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, - kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, - kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, - sgr0=\E[0m, - -# Use this for cygwin32 (tested with beta 19.1) -# underline is colored bright magenta -# shifted kf1-kf12 are kf11-kf22 -cygwinB19|ansi emulation for cygwin32, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, - kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, - kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, - kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, - use=ansi.sys, - -# Use this for cygwin (tested with version 1.1.0). -# I've combined pcansi and linux. Some values of course were different and -# I've indicated which of these were and which I used. -# Cheers, earnie_boyd@yahoo.com -# several changes based on running with tack and comparing with older entry -TD -# more changes from csw: -# add cbt [backtab] -# remove eo [erase overstrike with blank] -# change clear was \E[H\E[J now \E[2J (faster?) -# remove cols -# remove lines -# remove ncv#3 [colors collide with highlights, bitmask] not applicable -# to MSDOS box? -# add cub [cursor back param] -# add cuf [cursor forward param] -# add cuu [cursor up param] -# add cud [cursor down param] -# add hs [has status line] -# add fsl [return from status line] -# add tsl [go to status line] -# add smacs [Start alt charset] (not sure if this works) -# add rmacs [End alt charset] (ditto) -# add smcup [enter_ca_mode] (save console; thanks Corinna) -# add rmcup [exit_ca_mode] (restore console; thanks Corinna) -# add kb2 [center of keypad] -# add u8 [user string 8] \E[?6c -# add el [clear to end of line] \E[K -# Notes: -# cnorm [make cursor normal] not implemented -# flash [flash] not implemented -# blink [blink] not implemented very usefully in cygwin? \E[5m -# dim [dim] not implemented very usefully in cygwin? \E[2m -# cub1 [cursor back 1] typically \E[D, but ^H is faster? -# kNXT [shifted next key] not implemented -# kPRV [shifted prev key] not implemented -# khome [home key] really is \E[1~ NOT \E[H -# tbc [clear tab stops] not implemented -# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni -# smpch [Start PC charset] is \E[11m, same as smacs -# rmpch [End PC charset] is \E[10m, same as rmacs -# mir [move in insert mode] fails in tack? -# bce [back color erase] causes problems with change background color? -# cvvis [make cursor very visible] causes a stackdump when testing with -# testcurs using the output option? \E[?25h\E[?8c -# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c -# ech [erase characters param] broken \E[%p1%dX -# kcbt [back-tab key] not implemented in cygwin? \E[Z -# -# 2005/11/12 -TD -# Remove cbt since it does not work in current cygwin -# Add 'mir' and 'in' flags based on tack -cygwin|ansi emulation for Cygwin, - am, hs, mir, msgr, xon, - colors#8, it#8, pairs#64, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, - cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, - hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, - kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, - kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, - kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, - kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, - nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, - rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, - sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, - sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, - smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, - vpa=\E[%i%p1%dd, use=vt102+enq, - -# I've supplied this so that you can help test new values and add other -# features. Cheers, earnie_boyd@yahoo.com. -# -# Some features are from pcansi. The op value is from linux. Function-keys -# are from linux. These have been tested not to cause problems. xenl was in -# this list, but DOES cause problems so it has been removed -cygwinDBG|Debug Version for Cygwin, - am, eo, mir, msgr, xon, - colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, - cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, - il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, - kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, - kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, - kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, - knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, - rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, - rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, - sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, - smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq, - -# Key definitions: -# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the -# encodings used by other x86 environments. All others are invented for DJGPP. -# Oddly enough, while several combinations of modifiers are tabulated, there is -# none for shifted cursor keys. + il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l, + is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, + kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, + rmul=\E[24m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? + 25h, + s0ds=\E(B, s1ds=\E(0, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? + %p9%t\016%e\017%;, + sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, + smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, + use=rxvt+pcfkeys, use=vt220+keypad, +# Key Codes from rxvt reference: # -# F1 \E[[A -# F2 \E[[B -# F3 \E[[C -# F4 \E[[D -# F5 \E[[E -# F6 \E[17~ -# F7 \E[18~ -# F8 \E[19~ -# F9 \E[20~ -# F10 \E[21~ -# F11 \E[23~ -# F12 \E[24~ +# Note: Shift + F1-F10 generates F11-F20 # -# Delete \E[3~ -# Down Arrow \E[B -# End \E[4~ -# Home \E[1~ -# Insert \E[2~ -# Left Arrow \E[D -# Page Down \E[6~ -# Page Up \E[5~ -# Right Arrow \E[C -# Up Arrow \E[A +# For the keypad, use Shift to temporarily override Application-Keypad +# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock +# is off, escape sequences toggle Application-Keypad setting. +# Also note that values of Home, End, Delete may have been compiled +# differently on your system. # -# Shift-F1 \E[25~ -# Shift-F2 \E[26~ -# Shift-F3 \E[27~ -# Shift-F4 \E[28~ -# Shift-F5 \E[29~ -# Shift-F6 \E[30~ -# Shift-F7 \E[31~ -# Shift-F8 \E[32~ -# Shift-F9 \E[33~ -# Shift-F10 \E[34~ -# Shift-F11 \E[35~ -# Shift-F12 \E[36~ +# Normal Shift Control Ctrl+Shift +# Tab ^I ESC [ Z ^I ESC [ Z +# BackSpace ^H ^? ^? ^? +# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ +# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ +# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ +# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ +# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ +# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ +# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ +# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ +# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ +# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ +# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ +# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ +# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ +# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ +# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ +# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ +# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ +# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ +# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ +# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ +# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ +# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ +# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ +# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ +# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ +# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ +# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ +# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ +# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ # -# Ctrl-F1 \E[47~ -# Ctrl-F2 \E[48~ -# Ctrl-F3 \E[49~ -# Ctrl-F4 \E[50~ -# Ctrl-F5 \E[51~ -# Ctrl-F6 \E[52~ -# Ctrl-F7 \E[53~ -# Ctrl-F8 \E[54~ -# Ctrl-F9 \E[55~ -# Ctrl-F10 \E[56~ -# Ctrl-F11 \E[57~ -# Ctrl-F12 \E[58~ +# Application +# Up ESC [ A ESC [ a ESC O a ESC O A +# Down ESC [ B ESC [ b ESC O b ESC O B +# Right ESC [ C ESC [ c ESC O c ESC O C +# Left ESC [ D ESC [ d ESC O d ESC O D +# KP_Enter ^M ESC O M +# KP_F1 ESC O P ESC O P +# KP_F2 ESC O Q ESC O Q +# KP_F3 ESC O R ESC O R +# KP_F4 ESC O S ESC O S +# XK_KP_Multiply * ESC O j +# XK_KP_Add + ESC O k +# XK_KP_Separator , ESC O l +# XK_KP_Subtract - ESC O m +# XK_KP_Decimal . ESC O n +# XK_KP_Divide / ESC O o +# XK_KP_0 0 ESC O p +# XK_KP_1 1 ESC O q +# XK_KP_2 2 ESC O r +# XK_KP_3 3 ESC O s +# XK_KP_4 4 ESC O t +# XK_KP_5 5 ESC O u +# XK_KP_6 6 ESC O v +# XK_KP_7 7 ESC O w +# XK_KP_8 8 ESC O x +# XK_KP_9 9 ESC O y # -# Ctrl-Delete \E[43~ -# Ctrl-Down Arrow \E[38~ -# Ctrl-End \E[44~ -# Ctrl-Home \E[41~ -# Ctrl-Insert \E[42~ -# Ctrl-Left Arrow \E[39~ -# Ctrl-Page Down \E[46~ -# Ctrl-Page Up \E[45~ -# Ctrl-Right Arrow \E[40~ -# Ctrl-Up Arrow \E[37~ +# The source-code for rxvt actually defines mappings for F21-F35, using +# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys +# are rare, so this entry uses the shift- and control-modifiers as in +# xterm+pcfkeys to define keys past F12. # -# Alt-F1 \E[59~ -# Alt-F2 \E[60~ -# Alt-F3 \E[61~ -# Alt-F4 \E[62~ -# Alt-F5 \E[63~ -# Alt-F6 \E[64~ -# Alt-F7 \E[65~ -# Alt-F8 \E[66~ -# Alt-F9 \E[67~ -# Alt-F10 \E[68~ -# Alt-F11 \E[79~ -# Alt-F12 \E[80~ +# kIC is normally not used, since rxvt performs a paste for that (shifted +# insert), unless private mode 35 is set. # -# Alt-Delete \E[65~ -# Alt-Down Arrow \E[60~ -# Alt-End \E[66~ -# Alt-Home \E[41~ -# Alt-Insert \E[64~ -# Alt-Left Arrow \E[61~ -# Alt-Page Down \E[68~ -# Alt-Page Up \E[67~ -# Alt-Right Arrow \E[62~ -# Alt-Up Arrow \E[59~ +# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD +# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD +rxvt+pcfkeys|fragment for PC-style fkeys, + kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, + kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, + kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, + kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, + kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, + kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, + kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, + kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, + kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~, + kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, + kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@, + kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@, + kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^, + kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa, + +# rxvt was originally "xvt", first announced in April 1993: +# http://www.krsaborio.net/linux-desktops/research/1993/0416.html +#------------------------------------------------------------------------------ +# Article: 567 of comp.os.linux.announce +# Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu! +# caen!batcomputer!theory.TC.Cornell.EDU!mdw +# From: nation@rocket.sanders.com (Robert Nation) +# Newsgroups: comp.os.linux.announce +# Subject: xvt upload +# Date: 16 Apr 1993 18:13:07 GMT +# Organization: Cornell Theory Center +# Lines: 13 +# Approved: linux-announce@tc.cornell.edu (Matt Welsh) +# Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU> +# NNTP-Posting-Host: theory.tc.cornell.edu +# Keywords: xvt, xterm, Xwindows +# Originator: mdw@theory.TC.Cornell.EDU +# +# Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and +# rxvt.README on sunsite.unc.edu. +# +# Xvt is an xterm replacement which uses a little less memory, and is +# suitable for use on machines with small memories. Tek4010 support +# is removed. +# +# Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com) +# to make it a little more compact, and to add and remove certain features. +# +# +# -- +# Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu +#------------------------------------------------------------------------------ # -# Also: -# Alt-A \E[82~ -# Alt-B \E[82~ -# Alt-C \E[83~ -# Alt-D \E[84~ -# Alt-E \E[85~ -# Alt-F \E[86~ -# Alt-G \E[87~ -# Alt-H \E[88~ -# Alt-I \E[89~ -# Alt-J \E[90~ -# Alt-K \E[91~ -# Alt-L \E[92~ -# Alt-M \E[93~ -# Alt-N \E[94~ -# Alt-O \E[95~ -# Alt-P \E[96~ -# Alt-Q \E[97~ -# Alt-R \E[98~ -# Alt-S \E[99~ -# Alt-T \E[100~ -# Alt-U \E[101~ -# Alt-V \E[102~ -# Alt-W \E[103~ -# Alt-X \E[104~ -# Alt-Y \E[105~ -# Alt-Z \E[106~ -djgpp|ansi emulation for DJGPP alpha, - am, bce, msgr, xhp, xon, xt, - colors#8, it#8, pairs#64, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, - clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, - indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, - kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, - kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, - op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, - sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, +# Though its change-log does not mention this, John Davis has stated that he +# was the author of the changes to use the bce ("new color model") which was +# incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give +# dates, nor give developer's names. Initial color support was added for rxvt +# "2.0", which was sometime in 1994. +# +# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my +# work on vttest, as well as bug reports to Mark Olesen. For instance, the fix +# mentioned here +# https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J +# was from one of my bug-reports -TD +# +# While the color model both for xterm and rxvt was based on Linux console, +# Olesen (or possibly Davis) diverged in one respect from Linux's bce color +# behavior: inserting/deleting characters does not fill the newly empty cell +# with the default background color. +rxvt|rxvt terminal emulator (X Window System), + ncv@, + hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, + vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, +rxvt-color|rxvt terminal emulator (X Window System), + use=rxvt, +rxvt-256color|rxvt 2.7.9 with xterm 256-colors, + use=xterm+256color, use=rxvt, +rxvt-88color|rxvt 2.7.9 with xterm 88-colors, + use=xterm+88color, use=rxvt, +rxvt-xpm|rxvt terminal emulator (X Window System), + use=rxvt, +rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, + acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k + \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w + \302x\263y\363z\362{\343|\330}\234~\376, + use=rxvt, +rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, + acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k + \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w + \302x\263y\363z\362{\343|\330~\376, + use=rxvt-cygwin, -djgpp203|Entry for DJGPP 2.03, - OTbs, am, - cols#80, it#8, lines#25, - bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, - kcud1=^J, nel=^M^J, +# This variant is supposed to work with rxvt 2.7.7 when compiled with +# NO_BRIGHTCOLOR defined. rxvt needs more work... +rxvt-16color|rxvt with 16 colors like aixterm, + ncv#32, use=ibm+16color, use=rxvt, -djgpp204|Entry for DJGPP 2.04, - OTbs, am, AX, - colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, - clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, - cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, - dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, - home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, - il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, - kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, - kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, - ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, - setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, +#### MRXVT +# mrxvt 0.5.4 +# +# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which +# makes its function-keys different from other flavors of rxvt -TD +# +# Testing with tack: +# + made custom description (below) to work, though it sets TERM=xterm. +# +# Testing with vttest: +# + While "based on" rxvt, some of the basic functionality is broken. The +# window collapses to a single line when running several of the screens +# in vttest, e.g., the tests for cursor movement, screen features, +# double-sized characters. +# + The vt52 test works properly, but this is an exception. Due to the +# other bug(s) most of vttest is untestable. +# + the color test using ECH shows a gap in the bce model, like rxvt. +# +# Testing with xterm "vttest" scripts: +# + resize.pl does not work because mrxvt does implement CSI 18 t +# (not in rxvt, but not documented by mrxvt) but not CSI 19 t. +# + none of the "dynamic colors" (OSC colors) scripts work. +mrxvt|multitabbed rxvt, + XT, + kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, + kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, + kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, + kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, + kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, + use=rxvt, -# This is tested using U/Win's telnet. Scrolling is omitted because it is -# buggy. Another odd bug appears when displaying "~" in alternate character -# set (the emulator spits out error messages). Compare with att6386 -TD -uwin|U/Win 3.2 console, - am, eo, in, msgr, xenl, xon, - colors#8, it#8, ncv#58, pairs#64, - acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, - ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, - ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, - kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, - khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, - rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, - rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, - setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, - smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, +mrxvt-256color|multitabbed rxvt with 256 colors, + use=xterm+256color, use=mrxvt, -# This entry fits the Windows NT console when the _POSIX_TERM environment -# variable is set to 'on'. While the Windows NT POSIX console is seldom used, -# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP -# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating -# systems is not, and (surprise!) they match very well. -# -# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up -# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only -# are the installation instructions a pile of mind-numbing bureaucratese, -# but the termcap entry is actually broken and unusable as given; the :do: -# capability is misspelled "d". -# -# To use this, you need to a bunch of environment variables: -# -# SET _POSIX_TERM=on -# SET TERM=ansi -# SET TERMCAP=location of termcap file in POSIX file format -# which is case-sensitive. -# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap -# SET TMP=//C/TEMP -# -# Important note: setting the TMP environment variable in POSIX style renders -# it incompatible with a lot of other applications, including Visual C++. So -# you should have a separate command window just for vi. All the other -# variables may be permanently set in the Control Panel\System applet. -# -# You can find out more about the restrictions of this facility at -# . +#### ETERM +# From: Michael Jennings # -# From: Federico Bianchi , 15 Jan 1997 -ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, - am, bw, msgr, - cols#80, it#8, lines#25, - bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, - home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, - kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, - ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, -# From: jew@venus.sunquest.com -# Date: 19 Feb 93 23:41:07 GMT -# Here's a combination of ansi and vt100 termcap -# entries that works nearly perfectly for me -# (Gateway 2000 Handbook and Microsoft Works 3.0): -pcmw|PC running Microsoft Works, - am, xenl, - cols#80, it#8, lines#24, vt#3, - bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, - clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, - cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, - cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, - ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, - kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, - rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100, - ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, - tbc=\E[3g$<2/>, - -# From: Federico Bianchi -# This is the entry for the OpenNT terminal. -# The ntconsole name is for backward compatability. -# This is for OpenNT 2.0 and later. -# Later OpenNT was renamed to Interix. +# Eterm 0.9.3 # -# Presently it is distributed by Microsoft as Services For Unix (SFU). -# The 3.5 beta contains ncurses 4.2 (that is header files and executables, -# the documentation dates from 1.9.9e) -TD +# removed kf0 which conflicts with kf10 -TD +# remove cvvis which conflicts with cnorm -TD +# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT +# but does otherwise follow the rxvt+pcfkeys model -TD +# remove nonworking flash -TD +# remove km as per tack test -TD +Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), + am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, + btns#5, cols#80, it#8, lines#24, lm#0, ncv@, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, + is1=\E[?47l\E>\E[?1l, + is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, + kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, + kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, + mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, + rmso=\E[27m, rmul=\E[24m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? + 25h, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, + smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, + use=ecma+color, -interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, - am, bw, msgr, - colors#8, cols#80, lines#25, ncv#3, pairs#64, - acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234, - bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, - cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, - home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, - indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, - kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, - kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, - kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, - kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, - kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, - kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, - kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, - kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, - kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, - kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, - kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, - kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, - kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, - kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, - op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, - rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, - sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, - setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, - sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m, +Eterm-256color|Eterm with xterm 256-colors, + use=xterm+256color, use=Eterm, -opennt-35|ntconsole-35|OpenNT-term35 compatible with color, - lines#35, use=opennt, +Eterm-88color|Eterm with 88 colors, + use=xterm+88color, use=Eterm, -opennt-50|ntconsole-50|OpenNT-term50 compatible with color, - lines#50, use=opennt, +#### ATERM +# Based on rxvt 2.4.8, it has a few differences in key bindings +aterm|AfterStep terminal, + XT, + kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, -opennt-60|ntconsole-60|OpenNT-term60 compatible with color, - lines#60, use=opennt, - -opennt-100|ntconsole-100|OpenNT-term100 compatible with color, - lines#100, use=opennt, - -# OpenNT wide terminals -opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, - cols#125, use=opennt, - -opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, - lines#35, use=opennt-w, - -opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, - lines#50, use=opennt-w, - -opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, - lines#60, use=opennt-w, - -opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, - cols#132, use=opennt, +#### XITERM +# xiterm 0.5-5.2 +# This is not based on xterm's source... +# vttest shows several problems with keyboard, cursor-movements. +# see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm +xiterm|internationalized terminal emulator for X, + km@, + kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6, -# OpenNT terminals with no smcup/rmcup (names match termcap entries) -interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, - rmcup@, smcup@, use=opennt, -opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, - lines#35, use=opennt-nti, +#### HPTERM +# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in +# from BSD termcap. (hpterm: added empty , we have no idea what ACS +# chars look like --esr) +hpterm|X-hpterm|hp X11 terminal emulator, + am, da, db, mir, xhp, xon, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, + acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, + cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, + cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, + hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H, + kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, + kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, + knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, + memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, + pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, + rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, + rmul=\E&d@, + sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+ + %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, + sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A, + smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, +# HPUX 11 provides a color version. +hpterm-color|HP X11 terminal emulator with color, + ccc, + colors#64, pairs#8, + home=\E&a0y0C, + initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, + op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, -opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, - lines#50, use=opennt-nti, +#### EMU +# This is for the extensible terminal emulator on the X11R6 contrib tape. +# It corresponds to emu's internal emulation: +# emu -term emu +# emu's default sets TERM to "xterm", but that doesn't work well -TD +# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD +# fixes: add civis, cnorm, sgr -TD +emu|emu native mode, + am, bce, mir, msgr, xon, + colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, + acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s + \224t\225u\226v\227w\230x\231~\244, + bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, + cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, + cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, + cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, + dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, + ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, + hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, + is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, + kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01, + kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, + kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, + kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, + kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, + kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, + op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, + rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, + setaf=\Er%i%p1%d;, + sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6 + %t\EU%;, + sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, -opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, - lines#60, use=opennt-nti, +# vt220 Terminfo entry for the Emu emulation, corresponds to +# emu -term vt220 +# with NumLock set (to make the keypad transmit kf0-kf9). +# fixes: add am, xenl, corrected sgr0 -TD +emu-220|Emu-220 (vt200-7bit mode), + am, xenl, xon, + cols#80, it#8, lines#24, vt#200, + acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, + clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, + cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, + dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, + ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, + hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, + il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, + kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, + kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, + kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, + kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, + kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, + kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, + kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, + knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, + ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, + rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, + sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; + 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, + smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, -opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, - lines#100, use=opennt-nti, +#### MVTERM +# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, +# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings +# indicate that it emulates more than one terminal, but incompletely. +# +# This is adapted from a FreeBSD bug-report by Daniel Rudy +# It is based on vt102's entry, with some subtle differences, but also +# has status line +# supports ANSI colors (except for 'op' string) +# apparently implements alternate screen like xterm +# does not use padding, of course. +mvterm|vv100|SwitchTerm aka mvTERM, + am, eslok, hs, km, mir, msgr, xenl, xon, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, + fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, + kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, + op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, + rmul=\E[m, + rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, + sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, -######## COMMON TERMINAL TYPES +#### MTERM # -# This section describes terminal classes and maker brands that are still -# quite common, but have proprietary command sets not blessed by ANSI. +# This application is available by email from . +# +# "mterm -type ansi" sets $TERM to "ansi" +mterm-ansi|ANSI emulation, + am, bw, mir, msgr, + it#8, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, + cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, + il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, + invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m, + smul=\E[4m, vpa=\E[%i%p1%dd, +# mterm normally sets $TERM to "mterm" +mterm|mouse-sun|Der Mouse term, + am, bw, mir, + it#8, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S, + cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, + home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W, + rmir=^O, rmso=^T, smir=^Q, smso=^V, +# "mterm -type decansi" sets $TERM to "decansi" # +# note: kdch1, kfnd, kslt are in the source code, but do not work -TD +decansi|ANSI emulation with DEC compatibility hacks, + am, mir, msgr, xenl, + colors#8, it#8, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, + home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, + il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, + is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, + u7=\E[6n, vpa=\E[%i%p1%dd, -#### Altos +#### VWM +# http://vwm.sourceforge.net/ # -# Altos made a moderately successful line of UNIX boxes. In 1990 they were -# bought out by Acer, a major Taiwanese manufacturer of PC-clones. -# Acer has a web site at http://www.acer.com. +# VWM 2.0.2 (2009-05-01) +# vwmterm is a terminal emulator written for the VWM console window manager. +# This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23). +vwmterm|(vwm term), + am, bce, ccc, mir, msgr, npc, xenl, xon, + colors#8, pairs#64, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, + home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, + kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~, + kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, + rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, + smcup=\E[?1049h, smso=\E[3m, smul=\E[4m, + +#### MGR # -# Altos descriptions from Ted Mittelstaedt 4 Sep 1993 -# His comments suggest they were shipped with the system. +# MGR is a Bell Labs window system lighter-weight than X. +# These entries describe MGR's xterm-equivalent. +# They are courtesy of Vincent Broman 14 Jan 1997 # -# (altos2: had extension capabilities -# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ -# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ -# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ -# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: -# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ -# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ -# :HL=^AP\r:SP=\E[i:\ -# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ -# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ -# Comparison with the k* capabilities makes it obvious that the c* things are -# shift keys. I have renamed them to keys 32 and up accordingly. Also, -# :sr: was given as a boolean-- esr) -altos2|alt2|altos-2|altos II, - cols#80, it#8, lines#24, xmc#0, - clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, - ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, - if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, - is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, - kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, - kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, - kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, - kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, - kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, - nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, - smam=\E[?7h, smso=\E[7m, smul=\E[4m, -# (altos3: had extension capabilities -# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ -# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ -# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ -# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: -# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ -# :HL=^AP\r:SP=\E[i:\ -# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ -altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, - blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, -altos4|alt4|altos-4|altos IV, - use=wy50, -# (altos7: had extension capabilities: -# :GG#0:GI=\EH8:GF=\EH7:\ -# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ -# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ -# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ -# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: -# Comparison with the k* capabilities makes it obvious that the c* things are -# shift keys. I have renamed them to keys 32 and up accordingly. I have -# also made this entry relative to adm12 in order to give it an . The -# imported by use=adm+sgr may work, let me know. -- esr) -altos7|alt7|altos VII, - am, mir, - cols#80, lines#24, xmc#0, - acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, - clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, - ind=^J, invis=\EG1, - is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, - kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, - kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, - kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, - kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, - kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, - knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, - rmir=\Er, smir=\Eq, use=adm+sgr, -altos7pc|alt7pc|altos PC VII, - kend=\ET, use=altos7, +mgr|Bellcore MGR (non X) window system terminal emulation, + am, km, xon, + bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r, + csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, + cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, + dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, + dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, + ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, + il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S, + rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, + smul=\E4n, +mgr-sun|Mgr window with Sun keyboard, + ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, + kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, + kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, + kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, + kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, + kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, + kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, +mgr-linux|Mgr window with Linux keyboard, + ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, + kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, -#### Hewlett-Packard (hp) -# -# Hewlett-Packard -# 8000 Foothills Blvd -# Roseville, CA 95747 -# Vox: 1-(916)-785-4363 (Technical response line for VDTs) -# 1-(800)-633-3600 (General customer support) -# -# -# As of March 1998, HP no longer has any terminals in production. -# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being -# supported (they still have parts). So are the 2392a and 2394a. -# See the WORKSTATION CONSOLES section for the 700s. +#### SIMPLETERM +# st.suckless.org + +st|stterm| simpleterm, + use=st-0.7, + +# Reviewed 0.7: +# dim is intermittent, sometimes works, sometimes does not +# italics may show up with yellow color +# has control cursor-keys, alt cursor-keys, still no combinations +# has control pageup/down +# tmux extensions, see TERMINFO EXTENSIONS in tmux(1) +# Se and Ss are implemented in the source-code, but the terminfo +# provided with the source is incorrect, since Se/Ss are mis-coded +# as booleans rather than strings. +st-0.7|simpleterm 0.7, + ccc, + dim=\E[2m, + initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* + %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, + kcbt@, kent@, oc=\E]104\007, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m, + Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B, + kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~, + kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~, + kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A, + use=ecma+strikeout, use=st-0.6, + +# st-0.4.1 +# +# This version uses a table which supports a single modifier (a subset of +# xterm's keys, using the same scheme). Because it supports only a single +# modifier in this table, function keys f36-f48 are normally unavailable +# because they are assigned to modifier-4. +# +# The program assigns TERM to match the program name (the upstream source says +# "st", but Debian renames it to "stterm"). +# +# The source includes two entries which are not useful here: +# st-meta| simpleterm with meta key, +# st-meta-256color| simpleterm with meta key and 256 colors, +# because st's notion of "meta" does not correspond to the terminfo definition. +# Rather, it acts like xterm - when the meta feature is disabled. +# +# Removed invis -TD +# Added eo, removed ul -TD +# +# Reviewed st 0.5: +# implements control-modifier, but not control-shift for special keys +# implements alt-modifier, but not alt-shift for special keys +# +# Reviewed st 0.6: +# http://git.suckless.org/st/log/st.info +# Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1) +# still has no function keys past kf36 (no combinations of modifiers) +# no application keypad mode, e.g, kent. +st-0.6|simpleterm 0.6, + am, bce, hs, mir, msgr, npc, xenl, XT, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy + zz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, + invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, + kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, + kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, + ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, + kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, + kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, + kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~, + kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, + kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, + kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S, + kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, + kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, + kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, + kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, + kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, + kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, + kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, + kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, + kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, + kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, + kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, + kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~, + kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i, + mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, + rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, + sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;%?%p4%t;5%;%?%p7%t;8%;m, + sgr0=\E[0m, smacs=\E(0, smcup=\E[?1049h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=xterm+sl, + use=ecma+italics, +# +# st-0.1.1 +# +# Note: the original terminfo description uses leading blank to persuade +# ncurses to use "st" as its name. Proper fix for that is to use "st" as an +# alias. +# +# Reading the code shows it should work for aixterm 16-colors +# - added st-16color +# +# Using tack: +# - set eo (erase-overstrike) +# - set xenl +# - tbc doesn't work +# - hts works +# - cbt doesn't work +# - shifted cursor-keys send sequences like rxvt +# - sgr referred to unimplemented "invis" mode. +# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis +simpleterm|old-st| simpleterm 0.1.1, + am, eo, mir, msgr, ul, xenl, + colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, + cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, + rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;m, + sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, +st-16color|stterm-16color|simpleterm with 16-colors, + use=ibm+16color, use=st, +# 256 colors "works", but when running xterm's test-scripts, some garbage is +# shown in the titlebar. +# +# terminal wants to use TERM=stterm-256color, but that is longer than 14 +# characters, making the choice nonportable. +st-256color|stterm-256color|simpleterm with 256 colors, + ccc@, + initc@, oc@, use=xterm+256color, use=st, + +#### TERMINATOR +# https://github.com/software-jessies-org/jessies/wiki/Terminator +# +# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit +# Debian/current -TD (2011/8/20) +# +# There are some packaging problems: +# a) using Java, the program starts off using 50Mb, and climbs from there, +# up to 114Mb after testing (no scrollback). +# b) it insists on reinstalling its terminal description in $HOME/.terminfo +# (two copies, just in case the host happens to be Mac OS X). +# I deleted this after testing with tack. +# +# Issues/features found with tack: +# a) tbc does not work (implying that hts also is broken). +# Comparing with the tabs utility shows a problem with the last tabstop on +# a line. +# b) has xterm-style shifted function-key strings +# meta also is used, but control is ignored. +# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, +# meta) +# d) some combinations of shift/control send xterm-style sequences for +# insert/delete/home/end. +# e) numeric keypad sends only numbers (compare with vttest). +# f) meta mode (km) is not implemented. +# +# Issues found with ncurses test-program: +# a) bce is inconsistently implemented +# b) widths of Unicode values above 256 do not always agree with wcwidth. +# +# Checked with vttest, found low degree of compatibility there. +# +# Checked with xterm's scripts, found that the 256-color palette is fixed. +# +# Fixes: +# a) add sgr string +# b) corrected sgr0 to reset alternate character set +# c) modified smacs/rmacs to use SCS rather than SI/SO +# d) removed bce +# e) removed km +terminator|Terminator no line wrap, + eo, mir, msgr, xenl, xon, + colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x10000, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, + cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, + is1=\E[?47l\E=\E[?1l, + is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, + rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, + s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm, + setaf=\E[38;5;%p1%dm, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t + \E(0%e\E(B%;, + sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, + use=xterm+sl-twm, + +#### TERMINOLOGY +# https://www.enlightenment.org/about-terminology +# +# Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100 +# emulator, nor is it compatible with xterm, but it uses a few features from +# both -TD +# +# General comments: +# cursor does not fill on focus +# there are pervasive problems with clearing/erasing parts of the screen +# resizing the window causes it to stop listening to the keyboard +# tack - +# doesn't understand vt100 CPR needed for resize +# no CBT +# no cvvis +# has invis +# no blink +# uses bce model for colors, but (see below) fails the vttest screens +# has partial support for 256color feature. +# tack function-keys (a subset of xterm+pcf0), and +# tack cursor-keys (a subset of xterm+pce2): +# ctrl+shift (ignored) +# 2 shift +# shift-alt modifier -> shift (2) +# 3 alt +# 4 +# 5 ctrl +# tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1 +# ctrl + khome/kend works - none of the other modifiers do +# vttest - +# spits lots of messages from termptyesc.c especially in vttest. +# no 132-column mode +# fails menu 1, 2 (definitely not vt100-compatible) +# primary (claims vt420 with several options, apparently none work) and +# secondary report says (perhaps... vt420): \E[>41;285;0c +# CHA, HPR, VPA, CNL, CPL work +# BCE with ED/EL - fail +# BCE with ECH/indexing - fail +# SD/SU work +# unlike teken, background light/dark works +# can set title +# X10 and Normal mouse work +# Any-event mouse works +# Mouse button-event works +# +# This description uses xterm+pcf0, which is misleading because the program +# does not handle combinations of modifiers - but listing them all would +# involve more effort than its developers spent -TD +terminology-0.6.1|EFL-based terminal emulator, + mc5i@, + blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D, + kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kind=\E[1;2B, kri=\E[1;2A, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8 + %;m%?%p9%t\016%e\017%;$<2>, + vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~, + kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B, + kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B, + kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H, + kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D, + kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C, + kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C, + kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100, + use=xterm+256setaf, + +# Tested terminology 1.0.0 +# +# tack - +# Shifted cursor-keys send nothing, but xterm modifiers for control+shift +# and control+alt were added like xterm+pcc2 +# Editing keys have some features from xterm+pce2 +# Changed from xterm+pcf0 to xterm+pcf2 +# +# vttest - +# REP, SL, SR fail +# +# Aside from the partial fixes for function/cursor/editing keys, no improvement +# in other tests versus 0.6.1 +terminology-1.0.0|EFL-based terminal emulator, + civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m, + flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH, + rmacs=\E(B, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; + %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>, + sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics, + use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2, + use=xterm+pcc2, use=terminology-0.6.1, + +terminology|EFL-based terminal emulator, + use=terminology-1.0.0, + +######## OPENGL CLIENTS + +#### Alacritty +# https://github.com/jwilm/alacritty +# Version 0.2.1 (2018/10/03) +# Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X +# terminal programs) is not designed to run with a remote server. +# +# Packaged in Arch Linux - +# vttest: +# initial screensize 24x80 +# does not switch between 80/132 columns +# passes wrapping test +# identifies as a vt100 +# passes bce test +# vt220: +# fails ECH, leaving text on right margin +# no SRM, DECSCA +# vt320: +# fails DECXCPR +# does not implement any of the DECRQM/DECRPM controls +# does not implement any of the DECRQSS controls +# vt420: +# no DECBI, DECFI +# other: +# fails REP, SL, SR +# xterm: +# no X10 mouse +# has normal and highlight mouse +# has any-event and button-event mouse +# cursor-position wrong after alternate-screen +# none of the dtterm controls work +# tack: +# bell and flash do not work (perhaps Parallels problem) +# italics works; crossed-out does not +# function-keys work up to kf36; window manager interferes with remainder +# +# The program sources include "alacritty" and "alacritty-direct", which are +# copied from "xterm-256color" and "xterm-direct" (but using semicolon for +# subparameter delimiter). Refactored here to use ncurses building blocks -TD +alacritty|alacritty terminal emulator, + rs1=\Ec\E]104\007, use=xterm+256color, + use=alacritty+common, + +alacritty-direct|alacritty with direct color indexing, + use=xterm+indirect, use=alacritty+common, + +# removed ech, since it fails vttest -TD +# removed ecma+strikeout, not implemented -TD +alacritty+common|base fragment for alacritty, + npc, + ech@, indn=\E[%p1%dS, kb2=\EOE, kbs=^H, kcbt=\E[Z, kent=\EOM, + rin=\E[%p1%dT, Se=\E[0 q, use=xterm-basic, use=xterm+app, + use=ansi+rep, use=xterm+sm+1006, use=xterm+tmux, + use=ecma+italics, use=xterm+pce2, use=xterm+pcc2, + use=xterm+pcf2, + +#### Kitty +# https://github.com/kovidgoyal/kitty +# Version 0.12.3 +# Project started in 2016/10 (see alacritty), but is a Python script rather +# than Rust, using OpenGL. The same caveats regarding remote connections +# apply. This is not an X terminal, though (like alacritty), it copies +# features from xterm. +# +# Regarding the name "kitty", that is a pun, reflected in the description. +# But see +# http://www.9bis.net/kitty/ +# https://github.com/kovidgoyal/kitty/issues/9 +# https://github.com/kovidgoyal/kitty/issues/1025 +# and +# http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html +# https://github.com/kovidgoyal/kitty/issues/879 # +# Notes: +# initial screensize 71x22 +# does not respond to "resize -s" +# resizing with window manager gives no clues +# vttest +# does not switch between 80/132 columns +# fails wrapping test, copying vte/rxvt +# no reverse-background, no blink +# claims to be vt200: +# primary \E[?62;c +# secondary \E[>1;4000;12c +# however - +# no GR in the locking-shifts screen +# no NRCS or ISO-2022, anyway +# no VT52 +# VT220: +# has DECTCEM, ECH, but no SRM and DECSCA +# has operating condition report, none of the others +# VT320: +# has SU/SD +# DECRQSS ok for DECSTBM, SGR, none of the others +# no status-line +# VT420: +# DECXCPR device status works, none of the others +# no left/right margins +# has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA +# inside of DECCARA is uncolored +# line-drawing with DECCARA does not work +# aside from left/right margins, editing sequences look ok +# no DECFI, DECBI +# color: +# fails ECH test for bce +# ISO-6429 +# fails REP, SL, SL, but other cursor-movement ok +# xterm: +# does not recognize original alternate-screen +# cursor-position wrong after alternate-screen +# has normal mouse, any-event, any-button, but +# no X10 mouse +# no mouse-highlight tracking +# no DEC locator +# dtterm - only supports report-size chars/pixels +# tack: +# flash doesn't work +# bce should be set (but see vttest) +#* developer's terminfo stopped at kf25, but the program continues, +# copying xterm for the rest of the control+fkey sequence +# (but only one modifier is supported, like iTerm2). +#* it omitted shifted pageup/down +#* control+editing keys work +# In contrast to function-keys, some additional modifier combinations +# act like xterm for the editing/cursor-keys, e.g., alt+shift. While +# the implementation is incomplete, the building-blocks are consistent +# with what has been implemented -TD +#* ka1, ka3, kc1, kc3 were bogus (removed) +#* meta sends escape (removed kmm) -TD +#* cvvis does not make cursor "more visible" -TD +kitty|KovId's TTY, + use=xterm+256color, use=kitty+common, +kitty-direct|KovId's TTY using direct colors, + oc=\E]104\007, use=xterm+direct2, use=kitty+common, +kitty+common|KovId's TTY common properties, + am, mc5i, mir, msgr, npc, xenl, + cols#80, it#8, lines#24, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, + bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\n, indn=\E[%p1%dS, kbs=^?, kcbt=\E[Z, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, + kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, + kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, + kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, + kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, + kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, + kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, + kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, + kf36=\E[24;5~, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH, + kich1=\E[2~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~, + kpp=\E[5~, kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;;m, + sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%i%p1%dd, use=xterm+sl-twm, use=xterm+pce2, + use=xterm+pcc2, use=ecma+italics, use=xterm+alt1049, -# Generic HP terminal - this should (hopefully) work on any HP terminal. -hpgeneric|hp|hewlett-packard generic terminal, - OTbs, OTpt, am, da, db, mir, xhp, - cols#80, lines#24, lm#0, vt#6, - bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, - ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, - ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, - sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, - vpa=\E&a%p1%dY, +######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS +# -hp110|hewlett-packard model 110 portable, - lines#16, use=hpgeneric, +# Columbus UNIX virtual terminal. This terminal also appears in +# UNIX 4.0 and successors as line discipline 1 (?), but is +# undocumented and does not really work quite right. +cbunix|cb unix virtual terminal, + OTbs, am, da, db, + cols#80, lines#24, lm#0, + bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, + el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, + smso=\Ea^D, smul=\Ea^A, +# (vremote: removed obsolete ":nl@:" -- esr) +vremote|virtual remote terminal, + am@, + cols#79, use=cbunix, -hp+pfk+cr|hp function keys with CR, - kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, - kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, +pty|4bsd pseudo teletype, + cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, + smso=\Ea$, smul=\Ea!, use=cbunix, -hp+pfk-cr|hp function keys w/o CR, - kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, - kf8=\Ew, +#### Emacs -# The hp2621s use the same keys for the arrows and function keys, -# but not separate escape sequences. These definitions allow the -# user to use those keys as arrow keys rather than as function -# keys. -hp+pfk+arrows|hp alternate arrow definitions, - kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, - kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, - kll=\Eq\r, kri=\Es\r, +# https://www.emacswiki.org/emacs/AnsiTerm +# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el +# +# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 +eterm|gnu emacs term.el terminal emulation, + am, mir, xenl, + cols#80, lines#24, + bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, + smul=\E[4m, -hp+arrows|hp arrow definitions, - kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, - kind=\ES, kll=\EF, kri=\ET, +# The codes supported by the term.el terminal emulation in GNU Emacs 22.2 +eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, + am, mir, msgr, xenl, + colors#8, cols#80, lines#24, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, + knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, + ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, + sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, + sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%? + %p7%t;8%;m, + sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, + u6=\E[%i%d;%dR, u7=\E[6n, -# Generic stuff from the HP 262x series +# shell.el can "do" color, though not nearly as well. # -hp262x|HP 262x terminals, - xhp, - blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, - invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, - kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, - krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, - sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, - sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, - -# Note: no on HPs since that homes to top of memory, not screen. -# Due to severe 2621 braindamage, the only way to get the arrow keys to -# transmit anything at all is to turn on the function key labels -# with , and even then the user has to hold down shift! -# The default 2621 turns off the labels except when it has to to -# enable the function keys. If your installation prefers labels -# on all the time, or off all the time (at the "expense" of the -# function keys), use 2621-nl or 2621-wl. +# seen here: +# http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode # -# Note: there are newer ROMs for 2621's that allow you to set -# strap A so the regular arrow keys xmit \EA, etc, as with the -# 2645. However, even with this strap set, the terminal stops -# xmitting if you reset it, until you unset and reset the strap! -# Since there is no way to set/unset the strap with an escape -# sequence, we don't use it in the default. -# If you like, you can use 2621-ba (brain-damaged arrow keys). -hp2621-ba|2621 w/new rom and strap A set, - rmkx@, smkx@, use=hp+arrows, use=hp2621, - -# hp2621 with function labels. Most of the time they are off, -# but inside vi, the function key labels appear. You have to -# hold down shift to get them to xmit. -hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, - is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, -hp2621-fl|hp 2621, - xhp@, xon, - pb#19200, - cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, - ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, - sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, - use=hp+pfk+cr, use=hpgeneric, - -# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p -hp2621p|hp 2621 with printer, - mc4=\E&p13C, mc5=\E&p11C, use=hp2621, - -hp2621p-a|hp2621p with fn as arrows, - use=hp+pfk+arrows, use=hp2621p, - -# hp2621 with k45 keyboard -hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, - kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, - khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, - -# 2621 using all 48 lines of memory, only 24 visible at any time. -hp2621-48|48 line 2621, - lines#48, - cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, - use=hp2621, - -# 2621 with no labels ever. Also prevents vi delays on escape. -hp2621-nl|hp 2621 with no labels, - kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, - use=hp2621-fl, +# and +# https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html +# https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el +# https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el +# +# however, as tested with Emacs 24.5.1, the result is buggy, losing overlays +# frequently. The contemporaneous term.el aka ansi-term does not "support" +# italics but does not lose the color information -TD 2017/01/28. +dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes, + am, hc, + colors#8, it#8, ncv#13, pairs#64, + bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m, + rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr0=\E[m, smul=\E[4m, use=ecma+italics, + +#### Screen -# Needed for UCB ARPAVAX console, since lsi-11 expands tabs -# (wrong). +# Entries for use by the `screen' program by Juergen Weigert, +# Michael Schroeder, Oliver Laumann. The screen and +# screen-w entries came with version 3.7.1. The screen2 and screen3 entries +# come from University of Wisconsin and may be older. +# (screen: added on ANSI model -- esr) # -hp2621-nt|hp 2621 w/no tabs, - ht@, use=hp2621, - -# Hp 2624 B with 4 or 10 pages of memory. -# -# Some assumptions are made with this entry. These settings are -# NOT set up by the initialization strings. -# -# Port Configuration -# RecvPace=Xon/Xoff -# XmitPace=Xon/Xoff -# StripNulDel=Yes -# -# Terminal Configuration -# InhHndShk=Yes -# InhDC2=Yes -# XmitFnctn(A)=No -# InhEolWrp=No -# -# Note: the 2624 DOES have a true , believe it or not! -# -# The 2624 has an "error line" to which messages can be sent. -# This is CLOSE to what is expected for a "status line". However, -# after a message is sent to the "error line", the next carriage -# return is EATEN and the "error line" is turned back off again! -# So I guess we can't define , , , , , . -# -# This entry supports emacs (and any other program that uses raw -# mode) at 4800 baud and less. I couldn't get the padding right -# for 9600. -# -# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) -hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, - da, db, - lm#96, - flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, - use=hp+labels, use=scrhp, - -# This hp2626 entry does not use any of the fancy windowing stuff -# of the 2626. -# -# Indeed, terminfo does not yet handle such stuff. Since changing -# any window clears memory, it is probably not possible to use -# this for screen opt. -# -# ed is incredibly slow most of the time - I am guessing at the -# exact padding. Since the terminal uses xoff/xon this is intended -# only for cost computation, so that the terminal will prefer el -# or even dl1 which is probably faster! -# -# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only -# extra slow on the last line of the window. -# -# The padding probably should be changed. -# -hp2626|hp2626a|hp2626p|hp 2626, - da, db, - lm#0, pb#19200, - ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, - is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr, - use=hp+labels, use=scrhp, - -# This entry is for sysline. It allocates a 23 line window with -# a 115 line workspace for regular use, and a 1 line window for -# the status line. -# -# This assumes port 2 is being used. -# Turn off horizontal line, Create ws #1 with 115 lines, -# Create ws #2 with 1 line, Create window #1 lines 1-23, -# Create window #2 lines 24-24, Attach cursor to workspace #1. -# Note that this clears the tabs so it must be done by tset before -# it sets the tabs. -# -hp2626-s|hp 2626 using only 23 lines, - eslok, hs, - lines#23, - fsl=\E&d@\E&w7f2p1I\E&w4f1I, - is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, - tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, -# Force terminal back to 24 lines after being 23. -hp2626-ns|hp 2626 using all 24 lines, - is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, - use=hp2626, -# Various entries useful for small windows on 2626. -hp2626-12|hewlett-packard 2626 12 lines, - lines#12, use=hp2626, -hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, - cols#40, lines#12, use=hp2626, -hp2626-x40|hewlett-packard 2626 40 columns, - cols#40, use=hp2626, -hp2626-12-s|hewlett-packard 2626 11 lines plus status, - lines#11, use=hp2626-s, - -# -# hp2627 color tubes from University of Wisconsin -# -hp2627a-rev|hp 2627 with reverse video colors, - cr=^M, cud1=^J, ht=^I, ind=^J, - is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, - kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, - smul=\E&dD\E&v1S, use=hp2621-nl, -hp2627a|hp 2627 color terminal with no labels, - cr=^M, cud1=^J, ht=^I, ind=^J, - is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, - kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, - rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, - use=hp2621-nl, -hp2627c|hp 2627 color (cyan) terminal with no labels, - cr=^M, cud1=^J, ht=^I, ind=^J, - is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, - kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, - -# hp2640a doesn't have the Y cursor addressing feature, and C is -# memory relative instead of screen relative, as we need. +# 'screen' defines extensions to termcap. Some are used in its terminal +# description: +# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. +# AX (bool) Does understand ANSI set default fg/bg color +# (\E[39m / \E[49m). +# S0 (str) Switch charset 'G0' to the specified charset. +# E0 (str) Switch charset 'G0' back to standard charset. # -hp2640a|hp 2640a, - cup@, rmkx@, smkx@, use=hp2645, - -hp2640b|hp2644a|hp 264x series, - rmkx@, smkx@, use=hp2645, +# Initially tested with screen 3.09.08 +# +# According to its manual page +# +# Screen is a full-screen window manager that multiplexes a physical +# terminal between several processes (typically interactive shells). Each +# virtual terminal provides the functions of a DEC VT100 terminal and, in +# addition, several control functions from the ISO 6429 (ECMA 48, ANSI +# X3.64) and ISO 2022 standards (e.g. insert/delete line and support for +# multiple character sets). +# +# However, there is a design error in its support for video highlights. The +# program uses a table (rendlist) which equates the SGR codes to terminal +# capabilities. That, and color-decoding are hardcoded in screen; its behavior +# is modified only by the presence or absence of the corresponding capabilities. +# Not by their values. +# +# If screen sets the TERMCAP variable, it uses hardcoded strings which +# correspond to the rendlist table. +# +# The table gives this information: +# +# SGR capability +# --- --------- +# 1 bold +# 2 dim +# 3 standout +# 4 underline +# 5 blink +# - (unused 6) +# 7 reverse +# - (unused 8-21) +# 22 reset bold, standout and dim +# 23 reset standout +# 24 reset underline +# 25 reset blink +# - (unused 26) +# 27 reset reverse +# +# ECMA-48 differs from this: 3 and 23 set and reset italics, respectively. +# ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction. +# Without some redesign of screen, it is not possible to extend the set of +# capabilities. Substitution would be possible, e.g., sending italics in +# place of underline. +# +# Because screen uses hard-coded parsing, it does not check if two capabilities +# use the same value. For example, changing standout to be the same as any of +# the other capabilities will confuse screen. Curses applications which use +# sgr are not impacted (because that usually resets all capabilities before +# setting any), but termcap applications do not use sgr -TD +screen|VT 100/ANSI X3.64 virtual terminal, + OTbs, OTpt, am, km, mir, msgr, xenl, G0, + colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy + yzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, + nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, + rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t; + 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c, use=ecma+color, +# The bce and status-line entries are from screen 3.9.13 (and require some +# changes to .screenrc). +screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, + bce, + ech@, use=screen, +screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, + dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, -# (hp2641a: removed unknown :gu: -- esr) -hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, - am, da, db, mir, xhp, - cols#80, lines#24, - bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, - ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, - if=/usr/share/tabset/std, il1=\EL, ind=^J, - is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, - rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, - vpa=\E&a%p1%2dY, +# ====================================================================== +# Entries for GNU Screen with 16 colors. +# Those variations permit to benefit from 16 colors palette, and from +# bold font and blink attribute separated from bright colors. But they +# are less portable than the generic "screen" 8 color entries: Their +# usage makes real sense only if the terminals you attach and reattach +# do all support 16 color palette. -# This terminal should be used at 4800 baud or less. It needs padding for -# plain characters at 9600, I guessed at an appropriate cr delay. It really -# wants ^E/^F handshaking, but that doesn't work well even if you write -# software to support it. -hp2645|hp45|HP 2645 series, - pb#9600, - blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, - ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, - kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, - rmkx=\E&s0A, - sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, - sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, -# You should use this terminal at 4800 baud or less. -hp2648|hp2648a|HP 2648a graphics terminal, - clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, - dch1=\EP$<7>, ip=$<5>, use=hp2645, +screen-16color|GNU Screen with 16 colors, + use=ibm+16color, use=screen, -# The HP 150 terminal is a fairly vanilla HP terminal, with the -# clreol standout problem. It also has graphics capabilities and -# a touch screen, which we don't describe here. -hp150|hewlett packard Model 150, - OTbs, use=hp2622, +screen-16color-s|GNU Screen with 16 colors and status line, + use=ibm+16color, use=screen-s, -# HP 2382a terminals, "the little ones." They don't have any -# alternate character set support and sending out ^N/^O will -# leave the screen blank. -hp2382a|hp2382|hewlett packard 2382a, - da, db, - lh#1, lm#48, - acsc@, - pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, - rmacs@, - sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, - sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, +screen-16color-bce|GNU Screen with 16 colors and BCE, + use=ibm+16color, use=screen-bce, -hp2621-a|hp2621a-a|hp2621 with fn as arrows, - use=hp+pfk+arrows, use=hp2621-fl, +screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line, + bce, use=ibm+16color, use=screen-s, -# newer hewlett packard terminals +# ====================================================================== +# Entries for GNU Screen 4.02 with --enable-colors256. -newhpkeyboard|generic entry for HP extended keyboard, - kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, - kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, - kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, - use=hp+pfk-cr, +screen-256color|GNU Screen with 256 colors, + use=xterm+256setaf, use=screen, -newhp|generic entry for new hewlett packard terminals, - am, bw, mir, xhp, xon, - cols#80, lines#24, pb#4800, - acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., - bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, - cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, - dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, - invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, - pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, - pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, - pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, - rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, - sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, - sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, - tbc=\E3, use=newhpkeyboard, +screen-256color-s|GNU Screen with 256 colors and status line, + use=xterm+256setaf, use=screen-s, -memhp|memory relative addressing for new HP ttys, - vt#6, - clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, - cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, - home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, - mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, +screen-256color-bce|GNU Screen with 256 colors and BCE, + bce, use=xterm+256setaf, use=screen-bce, -scrhp|screen relative addressing for new HP ttys, - clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, - cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, - cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, - home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, - mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, +screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line, + bce, use=xterm+256setaf, use=screen-s, -# (hp+labels: added label values from a BRL termcap -- esr) -hp+labels|"standard" label info for new HP ttys, - lh#2, lw#8, nlab#8, - lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, - pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, - rmln=\E&j@, smln=\E&jB, +screen.xterm-256color|GNU Screen with xterm using 256 colors, + use=xterm+256setaf, use=screen.xterm-new, -hp+printer|"standard" printer info for HP ttys, - ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, +screen.konsole-256color|GNU Screen with konsole using 256 colors, + use=xterm+256setaf, use=screen.konsole, +screen.vte-256color|GNU Screen with vte using 256 colors, + use=xterm+256setaf, use=screen.vte, -# The new hp2621b is kind of a cross between the old 2621 and the -# new 262x series of machines. It has dip-switched options. -# The firmware has a bug in it such that if you give it a null -# length label, the following character is eaten! -hp2621b|hp 2621b with old style keyboard, - lh#1, lm#48, lw#8, nlab#8, - kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, - kind=\ET, kll=\EF, kri=\ES, - pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, - smln=\E&jB, use=hp2621, +screen.putty-256color|GNU Screen with putty using 256 colors, + use=xterm+256setaf, use=screen.putty, -hp2621b-p|hp 2621b with printer, - use=hp+printer, use=hp2621b, +screen.mlterm-256color|GNU Screen with mlterm using 256 colors, + use=xterm+256setaf, use=screen.mlterm, -# hp2621b - new 2621b with new extended keyboard -# these are closer to the new 26xx series than the other 2621b -hp2621b-kx|hp 2621b with extended keyboard, - use=newhpkeyboard, use=hp2621b, +# ====================================================================== -hp2621b-kx-p|hp 2621b with new keyboard & printer, - use=hp+printer, use=hp2621b-kx, +# Read the fine manpage: +# When screen tries to figure out a terminal name for +# itself, it first looks for an entry named "screen.", +# where is the contents of your $TERM variable. If +# no such entry exists, screen tries "screen" (or "screen-w" +# if the terminal is wide (132 cols or more)). If even this +# entry cannot be found, "vt100" is used as a substitute. +# +# Notwithstanding the manpage, screen uses its own notion of the termcap +# and some keys from "screen." are ignored. Here is an entry which +# covers those (tested with screen 4.00.02) -TD +screen+fkeys|function-keys according to screen, + kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, + khome=\E[1~, kslt@, -# Some assumptions are made in the following entries. -# These settings are NOT set up by the initialization strings. +# See explanation before "screen" entry. Cancel italics so that applications +# do not assume screen supports the feature. Add this tweak to entries which +# extend screen for terminals which do support italics. +screen+italics|screen cannot support italics, + ritm@, sitm@, # -# Port Configuration -# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes +# Here are a few customized entries which are useful -TD # -# Terminal Configuration -# InhHndShk(G)=Yes InhDC2(H)=Yes -# XmitFnctn(A)=No InhEolWrp=No +# Notes: +# (a) screen does not support invis. +# (b) screen's implementation of bw is incorrect according to tack. +# (c) screen appears to hardcode the strings for khome/kend, making it +# necessary to override the "use=" clause's values (screen+fkeys). +# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, +# which is NOT the same as the terminfo screen.. +# (e) when screen finds one of these customized entries, it sets $TERM to +# match. Hence, no "screen.xterm" entry is provided, since that would +# create heartburn for people running remote xterm's. +# (f) screen does not support rep. +# +# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV +# since the default translations override the built-in keycode +# translation. They are suppressed here to show what is tested by tack. +screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, + bce@, bw, + invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@, + sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| + %t;7%;%?%p4%t;5%;%?%p5%t;2%;m, + E3@, use=screen+italics, use=screen+fkeys, + use=xterm+x11mouse, use=xterm-new, +#:screen.xterm|screen for modern xterm, +#: use=screen.xterm-new, +# xterm-r6 does not really support khome/kend unless it is propped up by +# the translations resource. +screen.xterm-r6|screen customized for X11R6 xterm, + bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6, +# Color applications running in screen and TeraTerm do not play well together +# on Solaris because Sun's curses implementation gets confused. +screen.teraterm|disable ncv in teraterm, + ncv#127, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + use=screen+fkeys, use=xterm+x11mouse, use=screen, +# Other terminals +screen.rxvt|screen in rxvt, + bw, XT, + cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, + use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad, + use=screen, +screen.Eterm|screen in Eterm, + use=xterm+x11mouse, use=screen+fkeys, use=Eterm, +screen.mrxvt|screen in mrxvt, + use=xterm+x11mouse, use=screen+fkeys, use=mrxvt, +screen.vte|screen in any VTE-based terminal, + use=xterm+x11mouse, use=screen+italics, + use=screen+fkeys, use=vte, +screen.gnome|screen in GNOME Terminal, + use=xterm+x11mouse, use=screen+italics, + use=screen+fkeys, use=gnome, +screen.konsole|screen in KDE console window, + use=xterm+x11mouse, use=screen+italics, + use=screen+fkeys, use=konsole, +# fix the backspace key +screen.linux|screen in linux console, + bw, + kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys, + use=screen, +screen.mlterm|screen in mlterm, + use=xterm+x11mouse, use=screen+fkeys, use=mlterm, +screen.putty|screen in putty, + use=xterm+x11mouse, use=screen+fkeys, use=putty, + +# The default "screen" entry is reasonably portable, but not optimal for the +# most widely-used terminal emulators. The "bce" capability is supported in +# screen since 3.9.13, and when used, will require fewer characters to be sent +# to the terminal for updates. +# +# If you are using only terminals which support bce, then you can use this +# feature in your screen configuration. +# +# Adding these lines to your ".screenrc" file will allow using these customized +# entries: +# term screen-bce +# bce on +# defbce on +screen-bce.xterm-new|screen optimized for modern xterm, + bce, + ech@, use=screen+italics, use=screen.xterm-new, +screen-bce.rxvt|screen optimized for rxvt, + bce, + ech@, use=screen.rxvt, +screen-bce.Eterm|screen optimized for Eterm, + bce, + ech@, use=screen.Eterm, +screen-bce.mrxvt|screen optimized for mrxvt, + bce, + ech@, use=screen.mrxvt, +screen-bce.gnome|screen optimized for GNOME-Terminal, + bce, + ech@, use=screen+italics, use=screen.gnome, +screen-bce.konsole|screen optimized for KDE console window, + bce, + ech@, use=screen+italics, use=screen.konsole, +screen-bce.linux|screen optimized for linux console, + bce, + ech@, use=screen.linux, + +screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, + cols#132, use=screen, + +screen2|old VT 100/ANSI X3.64 virtual terminal, + cols#80, it#8, lines#24, + cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, + il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, + kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, + nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, + rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, + smso=\E[3m, smul=\E[4m, tbc=\E[3g, +# (screen3: removed unknown ":xv:LP:G0:" -- esr) +screen3|older VT 100/ANSI X3.64 virtual terminal, + km, mir, msgr, + cols#80, it#8, lines#24, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, + sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, + smul=\E[4m, tbc=\E[3g, + +#### Tmux + +# tmux is mostly compatible with screen, but has support for italics, and some +# of the xterm cursor bits. +# +# However, unlike screen, tmux has no provision for using derived terminal +# descriptions. When screen starts, it looks for a suitable "inner" terminal +# such as "screen.$TERM" to correspond to the outer terminal's quirks. The +# various entries such as screen.xterm-new provide a way to more closely +# match the terminal. +tmux|tmux terminal multiplexer, + invis=\E[8m, rmso=\E[27m, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + smso=\E[7m, E3=\E[3J, Smulx=\E[4\:%p1%dm, + use=ecma+italics, use=ecma+strikeout, use=xterm+edit, + use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux, + use=screen, + +tmux-256color|tmux with 256 colors, + use=xterm+256setaf, use=tmux, + +#### Dvtm + +# dvtwm 0.15 +# http://www.brain-dump.org/projects/dvtm/ +# +# + This uses ncurses to manage the display, including support for italics and +# default-colors. +# + However, default-colors are incomplete: do not set bce. +# + It does not implement flash (since no \e[?5h) +# + Do not set XT: dvtm knows about OSC 0 and 2, but not 1. +# Oddly enough, if $TERM contains "linux", it attempts to set the title. +# + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table. +# + The built-in table of function-keys (based on rxvt) is incomplete (ends +# with kf22). +# + It also omits the shifted cursor- and editing-keypad keys. +# However, it is confused by xterm's shifted cursor- and editing-keypad keys +# (and passes those through without interpretation) +# and may simply pass-through rxvt's, making it appear to work. +# In other cases such as kf23 and up, no pass-through is done. +# + Most of the mode-settings in the initialization/reset strings are not +# implemented; dvtm copies its description from rxvt. +dvtm|dynamic virtual terminal manager, + am, eo, mir, msgr, xenl, AX, + colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, + is1=\E[?47l\E=\E[?1l, + is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, + kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, + kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, + kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, + kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, + kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~, + op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? + 25h, + s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? + %p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, + use=ecma+italics, + +dvtm-256color|dynamic virtual terminal manager with 256 colors, + colors#0x100, pairs#0x10000, + setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; + 5;%p1%d%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 + ;%p1%d%;m, + use=dvtm, + +#### NCSA Telnet + +# Francesco Potorti : +# NCSA telnet is one of the most used telnet clients for the Macintosh. It has +# been maintained until recently by the National Center for Supercomputer +# Applications, and it is feature rich, stable and free. It can be downloaded +# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, +# xterm+sl, and the docs at NCSA. It works well. # +# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode +# The terminal options should be set as follows: +# Xterm sequences ON +# use VT wrap mode ON +# use Emacs arrow keys OFF +# CTRL-COMND is Emacs meta ON +# 8 bit mode ON +# answerback string: "ncsa-vt220-8" +# setup keys: all disabled # -# Hp 2622a & hp2623a display and graphics terminals +# Application mode is not used. # -hp2622|hp2622a|hp 2622, - da, db, - lm#0, pb#19200, - is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, +# Other special mappings: +# Apple VT220 +# HELP Find +# HOME Insert here +# PAGEUP Remove +# DEL Select +# END Prev Screen +# PAGEDOWN Next Screen +# +# Though it supports ANSI color, NCSA Telnet uses color to represent blinking +# text. +# +# The status-line manipulation is a mapping of the xterm-compatible control +# sequences for setting the window-title. So you must use tsl and fsl in +# pairs, since the latter ends the string that is loaded to the window-title. +ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, + am, km, mir, msgr, xenl, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, if=/usr/share/tabset/vt100, + il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, + is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, + kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, + kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, + kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, + khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, + rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, + rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, + rmso=\E[27m, rmul=\E[24m, + rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? + %p9%t\E(0%e\E(B%;, + sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, + smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq, +ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, + use=ncsa-m, use=klone+color, +ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, + hs@, + dsl@, fsl@, tsl@, use=ncsa, +ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, + hs@, + dsl@, fsl@, tsl@, use=ncsa-m, +# alternate -TD: +# The documented function-key mapping refers to the Apple Extended Keyboard +# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style +# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on +# some keyboards and many applications require these as F1-F4. +# +ncsa-vt220|NCSA Telnet using vt220-compatible function keys, + kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, + kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, use=ncsa, -# The 2623 is a 2622 with extra graphics hardware. -hp2623|hp2623a|hp 2623, - use=hp2622, +#### Pilot Pro Palm-Top +# +# Termcap for Top Gun Telnet and SSH on the Palm Pilot. +# https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/ +pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, + OTbs, am, xenl, + cols#39, lines#16, + bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n, + cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, + ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s, + rmso=\EB, smso=\Eb, -hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, - use=hp+printer, use=hp2624, +# From: Federico Bianchi +# These entries are for the Embeddable Linux Kernel System (ELKS) +# project - an heavily stripped down Linux to be run on 16 bit +# boxes or, eventually, to be used in embedded systems - and have been +# adapted from the stock ELKS termcap. The project itself looks stalled, +# and the latest improvements I know of date back to March 2000. +# +# To cope with the ELKS dumb console I added an "elks-glasstty" entry; +# as an added bonus, this deals with all the capabilities common to +# both VT52 and ANSI (or, eventually, "special") modes. -# The hewlett packard B can have an optional extra 6 pages of memory. -hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, - lm#240, use=hp2624, +elks-glasstty|ELKS glass-TTY capabilities, + OTbs, am, + cols#80, it#8, lines#25, + bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, + nel=\r\n, -hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, - lm#240, use=hp2624b-p, +elks-vt52|ELKS vt52 console, + clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, + home=\EH, use=elks-glasstty, -# Color manipulations for HP terminals -hp+color|hp with colors, - ccc, - colors#16, ncv#17, pairs#7, - initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, - oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, - op=\E&v0S, scp=\E&v%p1%dS, +elks-ansi|ELKS ANSI console, + clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + rmso=\E[m, smso=\E[7m, use=elks-glasstty, -# sets the screen to be 80 columns wide -hp2397a|hp2397|hewlett packard 2397A color terminal, - is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, +# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation +# instead of VT52, but the "elks" entry still refers to the latter. -# HP 700/44 Setup parameters: -# Terminal Mode HP-PCterm -# Inhibit Auto Wrap NO -# Status Line Host Writable -# PC Character Set YES -# Twenty-Five Line Mode YES -# XON/XOFF @128 or 64 (sc) -# Keycode Mode NO or YES (sc) -# Backspace Key BS or BS/DEL +elks|default ELKS console, + use=elks-vt52, + +# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS +# one but in screen size + +sibo|ELKS SIBO console, + cols#61, it#8, lines#20, use=elks-vt52, + +######## COMMERCIAL WORKSTATION CONSOLES # -# sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; -# \E\\? does not turn off keycode mode -# sets alternate start/stop; keycode on -hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, - am, eo, xenl, xon, + +#### Alpha consoles +# + +# This is from the OSF/1 Release 1.0 termcap file +pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, + am, xon, cols#80, lines#25, - acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, - bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, - cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, - ind=^J, - is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, - kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, - kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, - kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, - kpp=\E[5~, rmam=\E[?7l, - rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, - rmul=\E[m, sgr0=\E[m, smam=\E[?7h, - smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, - smul=\E[4m, xoffc=g, xonc=e, -# -# (hp2392: copied here from hpex -- esr) -hp2392|239x series, - cols#80, - cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, - kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, - kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, - rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, - use=hpsub, + el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, -hpsub|hp terminals -- capability subset, - am, da, db, mir, xhp, xon, - lines#24, - bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, - cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, - ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, - is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, - sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, - -# hpex: -# May be used for most 24 x 80 hp terminals, -# but has no padding added, so may allow runover in some terminals at high -# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and -# hp98x5 terminal emulators or hp98x6 consoles. -# Adds xy-cursor addressing, vertical cursor addressing, home, -# last line, and underline capabilities. +#### Sun consoles # -# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", -# moved here from hpsub -- esr) -hpex|hp extended capabilites, - cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, - kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, - smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, -# From: Ville Sulko , 05 Aug 1996 -hp2|hpex2|hewlett-packard extended capabilities newer version, - am, da, db, mir, xhp, - cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, - bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, - cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, - dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, - il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, - ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, - kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, - kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, - krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, - pfkey=\E&f%p1%dk%p2%l%dL%p2%s, - pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, - pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, - pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, - rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, - sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, - sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, - smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, +# :is1: resets scrolling region in case a previous user had used "tset vt100" +oldsun|Sun Microsystems Workstation console, + OTbs, am, km, mir, msgr, + cols#80, it#8, lines#34, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, + is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, + rmso=\E[m, sgr0=\E[m, smso=\E[7m, +# From: Alexander Lukyanov , 14 Nov 1995 +# capability later corrected by J.T. Conklin +# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) +sun-il|Sun Microsystems console with working insert-line, + am, km, msgr, + cols#80, lines#34, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, + kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z, + kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, + kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, + kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, + kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, + kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, + rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, + smso=\E[7m, u8=\E[1t, u9=\E[11t, +# On some versions of CGSIX framebuffer firmware (SparcStation 5), / +# flake out on the last line. Unfortunately, without them the terminal has no +# way to scroll. +sun-cgsix|sun-ss5|Sun SparcStation 5 console, + il@, il1@, use=sun-il, +# If you are using an SS5, change the sun definition to use sun-ss5. +sun|sun1|sun2|Sun Microsystems Inc. workstation console, + use=sun-il, -# HP 236 console -# From: -hp236|hp236 internal terminal emulator, - OTbs, am, - cols#80, lines#24, - clear=\EF, cnorm=\EDE, cub1=^H, - cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, - dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, - sgr0=\ECI, smso=\EBI, +sun+sl|Sun Workstation window status line, + hs, + dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, -# This works on a hp300 console running Utah 4.3 BSD -# From: Craig Leres -hp300h|HP Catseye console, - OTbs, am, da, db, mir, xhp, - cols#128, lines#51, lm#0, xmc#0, - bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, - cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, - dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, - if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, - kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, - rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, - smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, - vpa=\E&a%p1%dY, -# From: Greg Couch -hp9837|hp98720|hp98721|HP 9000/300 workstations, - OTbs, am, da, db, mir, xhp, - cols#128, it#8, lines#46, lm#0, - bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, - cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, - dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, - il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, - ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, - kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, - sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, - tbc=\E3, vpa=\E&a%p1%dY, -# HP 9845 desktop computer from BRL -# (hp9845: removed unknown capability :gu: -- esr) -hp9845|HP 9845, - OTbs, am, da, db, eo, mir, xhp, - cols#80, lines#21, - OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, - cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, - if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@, - smir=\EQ, smso=\E&dB, -# From: Charles A. Finnell of MITRE , developed 07SEP90 -# (hp98550: replaced /usr/share/tabset/9837 with std because ,; -# added empty to avoid warnings re / --esr) -hp98550|hp98550a|HP 9000 Series 300 color console, - OTbs, am, da, db, mir, xhp, - cols#128, it#8, lines#49, lm#0, - acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, - clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, - dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, - if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, - kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, - kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, - khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, - knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, - rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, - sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, - smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, -# From: Victor Duchovni -# (hp700-wy: removed obsolete ":nl=^J:"; -# replaced /usr/share/tabset/hp700-wy with std because , -- esr) -hp700-wy|HP700/41 emulating wyse30, - OTbs, am, bw, mir, msgr, - cols#80, it#8, lines#24, xmc#1, - cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, - if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, - is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, - kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, - kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, - ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, - sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, - smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, -hp70092|hp70092a|hp70092A|HP 700/92, - am, da, db, xhp, - cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, - acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, - bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, - cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, - dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, - hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, - ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, - kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, - kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, - krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, - rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, - sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, - smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, +# From: Tue Sep 24 13:14:44 1985 +sun-s|Sun Microsystems Workstation window with status line, + hs, + dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, +sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, + hs, + dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, +sun-48|Sun 48-line window, + cols#80, lines#48, use=sun, +sun-34|Sun 34-line window, + cols#80, lines#34, use=sun, +sun-24|Sun 24-line window, + cols#80, lines#24, use=sun, +sun-17|Sun 17-line window, + cols#80, lines#17, use=sun, +sun-12|Sun 12-line window, + cols#80, lines#12, use=sun, +sun-1|Sun 1-line window for sysline, + eslok, hs, + cols#80, lines#1, + dsl=^L, fsl=\E[K, tsl=\r, use=sun, +sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, + ich1@, rmir@, smir@, use=sun, +sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, + lines#35, + rmcup=\E[>4h, smcup=\E[>4l, use=sun, +sun-type4|Sun Workstation console with type 4 keyboard, + kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, + kcuu1=\E[215z, use=sun-il, -bobcat|sbobcat|HP 9000 model 300 console, - am, da, db, mir, xhp, - cols#128, it#8, lines#47, xmc#0, - cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, - cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, - dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, - il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, - rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, - smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, -gator-t|HP 9000 model 237 emulating extra-tall AAA, - lines#94, use=gator, -gator|HP 9000 model 237 emulating AAA, - bw, km, mir, ul, - cols#128, it#8, lines#47, - bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, - dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, - dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, - ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, - il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, - rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, - rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, -gator-52|HP 9000 model 237 emulating VT52, - cols#128, lines#47, use=vt52, -gator-52t|HP 9000 model 237 emulating extra-tall VT52, - lines#94, use=gator-52, +# Most of the current references to sun-color are from users wondering why this +# is the default on install. Details from reading the wscons manpage, adding +# cub, etc., here (rather than in the base sun-il entry) since it is not clear +# when those were added -TD (2005-05-28) +# +# According to wscons manpage, color is supported only on IA systems. +# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons +# does not list these. It also sets ncv#3, however that corresponds to +# underline and standout. +# +# Since the documentation and terminfo do not agree, see also current code at +# https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c +# +# That (actually a different driver which "supports" sun-color) also supports +# these features: +# vpa=\E[%i%p1%dd +# hpa=\E[%i%p1%d` +# cbt=\E[Z +# dim=\E[2m +# blink=\E[5m +# It supports bold, but not underline -TD (2009-09-19) +sun-color|Sun Microsystems Workstation console with color support (IA systems), + colors#8, ncv#3, pairs#64, + bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, + cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} + %=%t3%e%p1%d%;m, + sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m, + smso=\E[7m, use=sun, -#### Honeywell-Bull -# -# From: Michael Haardt 11 Jan 93 +#### Iris consoles # -# Honeywell Bull terminal. Its cursor and function keys send single -# control characters and it has standout/underline glitch. Most programs -# do not like these features/bugs. Visual bell is realized by flashing the -# "keyboard locked" LED. -dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, - cols#80, lines#25, - clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, - cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, - flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, - kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, -dku7003|Honeywell Bull DKU 7003 all features described, - msgr, - xmc#1, - blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, - rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, - use=dku7003-dumb, +# (wsiris: this had extension capabilities +# :HS=\E7F2:HE=\E7F7:\ +# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: +# See the note on Iris extensions near the end of this file. +# Finally, removed suboptimal =\EH\EJ and added & +# from BRL -- esr) +wsiris|iris40|iris emulating a 40 line visual 50 (approximately), + OTbs, OTnc, OTpt, am, + OTkn#3, cols#80, it#8, lines#40, + OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, + flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, + ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, + kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, + rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, + smul=\E7R2\E9P, -#### Lear-Siegler (adm) +#### NeWS consoles # -# These guys are long since out of the terminals business, but -# in 1995 many current terminals still have an adm type as one of their -# emulations (usually their stupidest, and usually labeled adm3, though -# these `adm3' emulations normally have adm3a+ capabilities). +# Console terminal windows under the NeWS (Sun's Display Postscript windowing +# environment). Note: these have nothing to do with Sony's News workstation +# line. # -# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a -# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') -# was being held to ground would trigger a send of the top line on the screen. -# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 -# hanging in the air. (Thanks to Eric Fischer, , -# for clearing up this point.) -adm1a|adm1|lsi adm1a, - am, - cols#80, lines#24, - bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, - ind=^J, -adm2|lsi adm2, - OTbs, am, - cols#80, lines#24, - bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, -# (adm3: removed obsolete ":ma=^K^P:" -- esr) -adm3|lsi adm3, - OTbs, am, - cols#80, lines#24, - bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, -# The following ADM-3A switch settings are assumed for normal operation: -# SPACE U/L_DISP CLR_SCRN 24_LINE -# CUR_CTL LC_EN AUTO_NL FDX -# Other switches may be set for operator convenience or communication -# requirements. I recommend -# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF -# ETX_OFF EOT_OFF -# Most of these terminals required an option ROM to support lower case display. -# Open the case and look at the motherboard; if you see an open 24-pin DIP -# socket, you may be out of luck. +# Entry for NeWS's psterm from Eric Messick & Hugh Daniel +# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) +psterm|psterm-basic|NeWS psterm-80x34, + OTbs, am, hs, km, ul, + cols#80, it#8, lines#34, + blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, + cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, + dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, + home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, + ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], + sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, + tsl=\EOl, +psterm-96x48|NeWS psterm 96x48, + cols#96, lines#48, use=psterm, +psterm-90x28|NeWS psterm 90x28, + cols#90, lines#28, use=psterm, +psterm-80x24|NeWS psterm 80x24, + cols#80, lines#24, use=psterm, +# This is a faster termcap for psterm. Warning: if you use this termcap, +# some control characters you type will do strange things to the screen. +# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) +psterm-fast|NeWS psterm fast version (flaky ctrl chars), + OTbs, am, hs, km, ul, + cols#80, it#8, lines#34, + blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, + cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, + dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, + il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, + rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, + smso=^Oo, smul=^Ou, tsl=^Ol, + +#### NeXT consoles # -# (adm3a: some capabilities merged in from BRl entry -- esr) -adm3a|lsi adm3a, - OTbs, am, - cols#80, lines#24, - OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, - cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, - cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, - kcuu1=^K, rs2=^N, -adm3a+|adm3a plus, - kbs=^H, use=adm3a, -# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) -adm5|lsi adm5, - xmc#1, - bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, - rmso=\EG, smso=\EG, use=adm3a+, -# A lot of terminals other than adm11s use these. Wherever you see -# use=adm+sgr with some of its capabilities disabled, try the -# disabled ones. They may well work but not have been documented or -# expressed in the using entry. We'd like to cook up an but the -# / sequences of the using entries vary too much. -adm+sgr|adm style highlight capabilities, - invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, - smso=\EG4, smul=\EG8, -# LSI ADM-11 from George William Hartwig, Jr. via BRL -# Status line additions from Stephen J. Muir -# from . could also -# be ^Z, according to his entry. -# (adm11: =\EG4 was obviously erroneous because it also said -# =\EG4. Looking at other ADMs confirms this -- esr) -adm11|LSI ADM-11, - OTbs, am, hs, - OTkn#8, cols#80, lines#24, - OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, - cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, - cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, - kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), - use=adm+sgr, -# From: Andrew Scott Beals -# Corrected by Olaf Siebert , 11 May 1995 -# Supervisor mode info by Ari Wuolle, , 27 Aug 1996 -# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had -# =\Eq but that looked wrong; this is from Dave Yost -# via BRL. That entry asserted , but I've left that out because -# neither earlier nor later ADMSs have it -- esr) +# Use `glasstty' for the Workspace application # -# You will need to get into the supervisor setup before you can set -# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should -# see a lot more setup options. + +# From: Dave Wetzel 22 Dec 1995 +next|NeXT console, + am, xt, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, + rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, +nextshell|NeXT Shell application, + am, + cols#80, + bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H, + kcud1=\n, nel=\r\n, + +#### Sony NEWS workstations # -# While in supervisor setup you can also use following codes: + +# (news-unk: this had :KB=news: -- esr) +news-unk|SONY NEWS vt100 emulator common entry, + OTbs, OTpt, am, xenl, + cols#80, + OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, + cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, + if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, + is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, + kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, + sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # -# Ctrl-P Personality character selections (configure for example what -# arrow keys send, if I recall correctly) -# Ctrl-T tabs 1-80 use left&right to move and up to set and -# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor -# Ctrl-B Binary setup (probably not needed. I think that everything can -# be set using normal setup) -# Ctrl-A Answerback mode (enter answerback message) -# Ctrl-U User friendly mode (normal setup) -# Ctrl-D Defaults entire setup and function keys from EPROM tables -# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. -# Ctrl-R Reads both setup and functions keys from NVM. -# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status +# (news-29: this had :TY=ascii: --esr) +news-29|SONY NEWS vt100 emulator with 29 lines, + lines#29, use=news-unk, +# (news-29-euc: this had :TY=euc: --esr) +news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC, + use=news-29, +# (news-29-sjis: this had :TY=sjis: --esr) +news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS, + use=news-29, # -# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to -# RTS/CTS used nowadays with virtually every modem and computer. 19200 -# bps works fine with hardware flow control. +# (news-33: this had :TY=ascii: --esr) +news-33|SONY NEWS vt100 with 33 lines, + lines#33, use=news-unk, +# (news-33-euc: this had :TY=euc: --esr) +news-33-euc|SONY NEWS vt100 with 33 lines and EUC, + use=news-33, +# (news-33-sjis: this had :TY=sjis: --esr) +news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS, + use=news-33, # -# The following null-modem cable should fix this and enable you to use -# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also -# set ADM-12+ for DTR handshaking from supervisor setup. +# (news-42: this had :TY=ascii: --esr) +news-42|SONY NEWS vt100 with 42 lines, + lines#42, use=news-unk, +# (news-42-euc: this had :TY=euc: --esr) +news-42-euc|SONY NEWS vt100 with 42 lines and EUC, + use=news-42, +# (news-42-sjis: this had :TY=sjis: --esr) +news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS, + use=news-42, # -# PC Serial ADM-12+ -# -------- ------- -# 2 - 3 -# 3 - 2 -# 4 - 5 -# 5 - 20 -# 6,8 - 4 -# 7 - 7 -# 20 - 6,8 +# NEWS-OS old termcap entry # -adm12|lsi adm12, - OTbs, OTpt, am, mir, - OTug#1, cols#80, it#8, lines#24, - bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, - is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, - kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, - kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, - use=adm+sgr, -# (adm20: removed obsolete ":kn#7:" -- esr) -adm20|lear siegler adm20, - OTbs, am, - cols#80, it#8, lines#24, - bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, - cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, - kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, - sgr0=\E(, smso=\E), -adm21|lear siegler adm21, - xmc#1, - bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, - ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, - use=adm3a, -# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, -# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; -# removed bogus-looking \200 from before . -- esr) -adm22|lsi adm22, - OTbs, am, - cols#80, lines#24, - bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, - is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, - kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, - lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), -# ADM 31 DIP Switches +# (news-old-unk: this had :KB=news:TY=sjis: --esr) +news-old-unk|SONY NEWS vt100 emulator common entry, + OTbs, OTpt, am, xenl, + cols#80, vt#3, + OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, + cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # -# This information comes from two versions of the manual for the -# Lear-Siegler ADM 31. +# (nwp512: this had :DE=^H:, which I think means --esr) +nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, + OTbs, + lines#40, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40 + r\E8, + use=news-old-unk, # -# Main board: -# rear of case -# +-||||-------------------------------------+ -# + S1S2 ||S + -# + ||3 + -# + + -# + ||S + -# + ||4 + -# + + -# + + -# + + -# + + -# + + -# +-+ +-+ -# + + -# + S5 S6 S7 + -# + == == == + -# +----------------------------------------------+ -# front of case (keyboard) +# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) +nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, + lines#42, + is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, + use=news-old-unk, # -# S1 - Data Rate - Modem -# S2 - Data Rate - Printer -# ------------------------ -# Data Rate Setting -# ------------------- -# 50 0 0 0 0 -# 75 1 0 0 0 -# 110 0 1 0 0 -# 134.5 1 1 0 0 -# 150 0 0 1 0 -# 300 1 0 1 0 -# 600 0 1 1 0 -# 1200 1 1 1 0 -# 1800 0 0 0 1 -# 2000 1 0 0 1 -# 2400 0 1 0 1 -# 3600 1 1 0 1 -# 4800 0 0 1 1 -# 7200 1 0 1 1 -# 9600 0 1 1 1 -# x 1 1 1 1 -# -# S3 - Interface/Printer/Attributes -# --------------------------------- -# Printer Busy Control -# sw1 sw2 sw3 -# --------------- -# off off off Busy not active, CD disabled -# off off on Busy not active, CD enabled -# off on off Busy active on J5-20, CD disabled -# on off off Busy active on J5-19, CD disabled - Factory Set. -# on off on Busy active on J5-19, CD enabled -# -# sw4 Used in conjuction with S4 for comm interface control - Fact 0 -# -# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 -# -# sw6 ON enables printer BUSY active LOW - Factory Setting -# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses -# -# sw7 ON - steady cursor - Factory Setting -# OFF - blinking cursor -# -# sw8 ON causes selected attribute character to be displayed -# OFF causes SPACE to be displayed instead - Factory Setting -# -# S4 - Interface -# -------------- -# Modem Interface -# S3 S4 S4 S4 S4 -# sw4 sw1 sw2 sw3 sw4 -# --------------------------- -# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and -# Current Loop disabled - Factory Setting -# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect -# disabled -# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and -# Current Loop Disabled -# -# sw5 ON disables dot stretching mode - Factory Setting -# OFF enables dot stretching mode -# sw6 ON enables blanking function -# OFF enables underline function - Factory Setting -# sw7 ON causes NULLS to be displayed as NULLS -# OFF causes NULLS to be displayed as SPACES - Factory Setting -# -# S5 - Word Structure -# ------------------- -# sw1 ON enables BREAK key - Factory Setting -# OFF disables BREAK key -# sw2 ON selects 50Hz monitor refresh rate -# OFF selects 60Hz monitor refresh rate - Factory Setting -# -# Modem Port Selection -# sw3 sw4 sw5 -# --------------- -# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits -# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits -# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. -# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit -# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits -# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit -# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit -# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit -# -# sw6 ON sends bit 8 a 1 (mark) -# OFF sends bit 8 as 0 (space) - Factory Setting -# sw7 ON selects Block Mode -# OFF selects Conversation Mode - Factory Setting -# sw8 ON selects Full Duplex operation -# OFF selects Half Duplex operation - Factory Setting -# -# S6 - Printer -# ------------ -# sw1, sw2, sw6, sw7 Reserved - Factory 0 +# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as . --esr) +nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, + OTbs, + lines#40, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40 + r\E8, + use=news-old-unk, # -# Printer Port Selection -# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 +# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) +nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, + OTbs, + lines#31, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31 + r\E8, + use=news-old-unk, # -# sw8 ON enables Printer Port -# OFF disables Printer Port - Factory Setting +# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as ; --esr) +# also the alias vt100-bm. +nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, + OTbs, + lines#33, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33 + r\E8, + use=news-old-unk, # -# S7 - Polling Address -# -------------------- -# sw1-7 Establish ASCII character which designates terminal polling address -# ON = logic 0 -# OFF = logic 1 - Factory Setting -# sw8 ON enables Polling Option -# OFF disables Polling Option - Factory Setting +# (nwp513-o: had :DE=^H:, I think that's ; also the alias vt100-bm --esr) +nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, + OTbs, + lines#31, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31 + r\E8, + use=news-old-unk, # +# (news28: this had :DE=^H:, I think that's , and :KB=nws1200: --esr) +news28|sony vt100 emulator 28 lines, + OTbs, + lines#28, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28 + r\E8, + use=news-old-unk, # -# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. +# (news29: this had :TY=ascii:KB=nws1200:\ --esr) +news29|news28-a|sony vt100 emulator 29 lines, + lines#29, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29 + r\E8, + use=news-old-unk, # -# This adm31 entry uses underline as the standout mode. -# If the adm31 gives you trouble with standout mode, check the DIP switch in -# position 6, bank @c11, 25% from back end of the circuit board. Should be -# OFF. If there is no such switch, you have an old adm31 and must use oadm31. -# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) -adm31|lsi adm31 with sw6 set for underline mode, - OTbs, am, mir, - cols#80, lines#24, - bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, - kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, - kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, - rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, -adm31-old|o31|old adm31, - rmul@, smso=\EG4, smul@, use=adm31, -# LSI ADM-36 from Col. George L. Sicherman via BRL -adm36|LSI ADM36, - OTbs, OTpt, - OTkn#4, - if=/usr/share/tabset/vt100, - is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, - use=vt100, -# (adm42: removed obsolete ":ma=^K^P:" -- esr) -adm42|lsi adm42, - OTbs, am, +# (news511: this had :TY=sjis: --esr) +nwp511|nwp-511|nwp-511 vt100, + OTbs, OTpt, am, xenl, cols#80, lines#24, - bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, - il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, - kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, - smir=\Eq, smul@, use=adm+sgr, -# The following termcap for the Lear Siegler ADM-42 leaves the -# "system line" at the bottom of the screen blank (for those who -# find it distracting otherwise) -adm42-ns|lsi adm-42 with no system line, - cbt=\EI\EF \011, clear=\E;\EF \011, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, - dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, - el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, - smir=\Eq\EF \011, use=adm42, -# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. -# The insert mode of this terminal is commented out because it's broken for our -# purposes in that it will shift the position of every character on the page, -# not just the cursor line! -# From: Michael Driscoll 10 July 1996 -adm1178|1178|lsi adm1178, - am, - cols#80, lines#24, xmc#1, - bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, - home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, - kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, - sgr0=\E), smso=\EG4, smul=\EG1, + clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, + ed=\E[J$<30/>, el=\E[K$<3/>, + flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, + il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, + ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, + rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, + smso=\E[7m$<2/>, smul=\E[4m$<2/>, +# (news517: this had :TY=sjis:. --esr) +nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, + eslok, hs, + cols#80, lines#30, + OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, + is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + tsl=\E[1$}\E[;%df, use=vt200, +# (news517-w: this had :TY=sjis:. --esr) +nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, + eslok, hs, + cols#132, lines#50, + OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, + is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, + tsl=\E[1$}\E[;%df, use=vt200, -#### Prime -# -# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings -# on 14 Dec 1992 and lightly edited by esr. -# Prime merged with ComputerVision in the late 1980s; you can reach them at: -# -# ComputerVision Services -# 500 Old Connecticut Path -# Framingham, Mass. +#### Common Desktop Environment # -# Standout mode is dim reverse-video. -pt100|pt200|wren|fenix|prime pt100/pt200, - am, bw, mir, msgr, - cols#80, it#8, lines#24, - cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, - cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, - ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, - home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, - rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, - smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, - smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, -pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, - cols#132, - cup=\E[%i%p1%d;%p2%dH, use=pt100, -pt250|Prime PT250, - rmso@, smso@, use=pt100, -pt250w|Prime PT250 in 132-column mode, - rmso@, smso@, use=pt100w, +# This ships with Sun's CDE in Solaris 2.5 +# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov +dtterm|CDE desktop terminal, + am, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, lm#0, ncv@, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, + ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, + sc=\E7, + sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, -#### Qume (qvt) +######## Non-Unix Consoles # -# Qume, Inc. -# 3475-A North 1st Street -# San Jose CA 95134 -# Vox: (800)-457-4447 -# Fax: (408)-473-1510 -# Net: josed@techsupp.wyse.com (Jose D'Oliveira) + +#### EMX termcap.dat compatibility modes # -# Qume was bought by Wyse, but still (as of early 1995) has its own support -# group and production division. -# -# Discontinued Qume models: -# -# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ -# built to replace them, and a qvt119+ which was a 101+ with available wide -# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations -# and an ANSI-compatible qvt203 that replaced it. Qume started producing -# ANSI-compatible terminals with the qvt323 and qvt61. -# -# Current Qume models (as of February 1995): -# -# All current Qume terminals have ANSI-compatible operation modes. -# Qume is still producing the qvt62, which features emulations for other -# popular lines such as ADDS, and dual-host capabilities. The qvt82 is -# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal -# with many emulations including Wyse370, Wyse 325, etc. Their newest -# model is the qvt520, which is vt420-compatible. -# -# There are some ancient printing Qume terminals under `Daisy Wheel Printers' +# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the +# no_color_video to inform the application that standout(1), underline(2) +# reverse(4) and invisible(64) don't work with color. +emx-base|DOS special keys, + bce, bw, + it#8, ncv#71, + bel=^G, use=ansi.sys, + +# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, +# a Unix-style environment used on OS/2. (Note that the suffix makes some +# names longer than 14 characters, the nominal maximum). # -# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its -# setup mode. Shift-s should be a configuration save to NVRAM. +# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. +ansi-emx|ANSI.SYS color, + am, bce, eo, mir, msgr, xon, + colors#8, cols#80, it#8, lines#25, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, + cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dp, ed=\E[J, el=\E[K, + flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D, + kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l, + rmpch=\E[10m, rmso=\E[0;44m\E[1;33m, + rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h, + smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m, + tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base, +# nice colors for Emacs (white on blue, mode line white on cyan) +ansi-color-2-emx|ANSI.SYS color 2, + clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, + rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, + setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, + smul=\E[1;36;44m, use=ansi-emx, +# nice colors for Emacs (white on black, mode line black on cyan) +ansi-color-3-emx|ANSI.SYS color 3, + clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, + rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, + setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, + smul=\E[0;36;40m, use=ansi-emx, +mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, + am, + cols#80, it#8, lines#24, + clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, + kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, + kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, + kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m, + sgr0=\E[0m, -qvt101|qvt108|qume qvt 101 and QVT 108, - xmc#1, use=qvt101+, +#### Cygwin -# This used to have but no or . The BSD termcap -# file had . I've done the safe thing and yanked -# both. The is from BSD, which also claimed bold=\E( and dim=\E). -# What seems to be going on here is that this entry was designed so that -# the normal highlight is bold and standout is dim plus something else -# (reverse-video maybe? But then, are there two sequences?) -qvt101+|qvt101p|qume qvt 101 PLUS product, - am, bw, hs, ul, - cols#80, lines#24, xmc#0, - bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, - flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, - ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, - kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, - kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, - khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, - smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, -qvt102|qume qvt 102, - cnorm=\E., use=qvt101, -# (qvt103: added / based on init string -- esr) -qvt103|qume qvt 103, - am, xenl, xon, - cols#80, it#8, lines#24, vt#3, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, - cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, - hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, - kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, - rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, - rmso=\E[m$<2>, rmul=\E[m$<2>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, - sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, - smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, -qvt103-w|qume qvt103 132 cols, - cols#132, lines#24, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, -qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, - am, hs, mir, msgr, - cols#80, lines#24, xmc#0, - bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, - cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, - cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, - el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, - hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, - kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, - kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, - mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, - tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, -qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, - lines#25, use=qvt119+, -qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, - cols#132, - is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, -qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, - lines#25, use=qvt119+, -qvt203|qvt203+|qume qvt 203 Plus, - dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, - ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, - kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, - kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, -qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), - cols#132, lines#24, - rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, -# -# Since a command is present for enabling 25 data lines, -# a specific terminfo entry may be generated for the 203. -# If one is desired for the QVT 119 PLUS then 25 lines must -# be selected in the status line (setup line 9). -# -qvt203-25|QVT 203 PLUS with 25 by 80 column mode, - cols#80, lines#25, - is2=\E[=40h\E[?3l, use=qvt203, -qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, - cols#132, lines#25, - rs2=\E[?3h\E[=40h, use=qvt203, +# Use this for cygwin32 (tested with beta 19.1) +# underline is colored bright magenta +# shifted kf1-kf12 are kf11-kf22 +cygwinB19|ANSI emulation for cygwin32, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, + use=ansi.sys, -#### Televideo (tvi) -# -# TeleVideo -# 550 East Brokaw Road -# PO Box 49048 95161 -# San Jose CA 95112 -# Vox: (408)-954-8333 -# Fax: (408)-954-0623 -# +# Use this for cygwin (tested with version 1.1.0). +# I've combined pcansi and linux. Some values of course were different and +# I've indicated which of these were and which I used. +# Cheers, earnie_boyd@yahoo.com +# several changes based on running with tack and comparing with older entry -TD +# more changes from csw: +# add cbt [backtab] +# remove eo [erase overstrike with blank] +# change clear was \E[H\E[J now \E[2J (faster?) +# remove cols +# remove lines +# remove ncv#3 [colors collide with highlights, bitmask] not applicable +# to MSDOS box? +# add cub [cursor back param] +# add cuf [cursor forward param] +# add cuu [cursor up param] +# add cud [cursor down param] +# add hs [has status line] +# add fsl [return from status line] +# add tsl [go to status line] +# add smacs [Start alt charset] (not sure if this works) +# add rmacs [End alt charset] (ditto) +# add smcup [enter_ca_mode] (save console; thanks Corinna) +# add rmcup [exit_ca_mode] (restore console; thanks Corinna) +# add kb2 [center of keypad] +# add u8 [user string 8] \E[?6c +# add el [clear to end of line] \E[K +# Notes: +# cnorm [make cursor normal] not implemented +# flash [flash] not implemented +# blink [blink] not implemented very usefully in cygwin? \E[5m +# dim [dim] not implemented very usefully in cygwin? \E[2m +# cub1 [cursor back 1] typically \E[D, but ^H is faster? +# kNXT [shifted next key] not implemented +# kPRV [shifted prev key] not implemented +# khome [home key] really is \E[1~ NOT \E[H +# tbc [clear tab stops] not implemented +# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni +# smpch [Start PC charset] is \E[11m, same as smacs +# rmpch [End PC charset] is \E[10m, same as rmacs +# mir [move in insert mode] fails in tack? +# bce [back color erase] causes problems with change background color? +# cvvis [make cursor very visible] causes a stackdump when testing with +# testcurs using the output option? \E[?25h\E[?8c +# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c +# ech [erase characters param] broken \E[%p1%dX +# kcbt [back-tab key] not implemented in cygwin? \E[Z # -# These require incredible amounts of padding. +# 2005/11/12 -TD +# Remove cbt since it does not work in current cygwin +# Add 'mir' and 'in' flags based on tack +cygwin|ANSI emulation for Cygwin, + am, hs, mir, msgr, xon, + colors#8, it#8, pairs#64, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j + \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v + \301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, + nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, + rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, + sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7 + %t;8%;%?%p9%t;11%;m, + sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, + smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, + vpa=\E[%i%p1%dd, use=vt102+enq, + +# I've supplied this so that you can help test new values and add other +# features. Cheers, earnie_boyd@yahoo.com. # -# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer -# Televideo terminals are ANSI and PC-ANSI compatible. +# Some features are from pcansi. The op value is from linux. Function-keys +# are from linux. These have been tested not to cause problems. xenl was in +# this list, but DOES cause problems so it has been removed +cygwinDBG|Debug Version for Cygwin, + am, eo, mir, msgr, xon, + colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j + \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v + \301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, + kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, + kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, + knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m, + rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, + rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 + %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, + sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, -tvi803|televideo 803, - clear=\E*$<10>, use=tvi950, +#### DJGPP -# Vanilla tvi910 -- W. Gish 10/29/86 -# Switch settings are: +# Key definitions: +# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the +# encodings used by other x86 environments. All others are invented for DJGPP. +# Oddly enough, while several combinations of modifiers are tabulated, there is +# none for shifted cursor keys. # -# S1 1 2 3 4 -# D D D D 9600 -# D D D U 50 -# D D U D 75 -# D D U U 110 -# D U D D 135 -# D U D U 150 -# D U U D 300 -# D U U U 600 -# U D D D 1200 -# U D D U 1800 -# U D U D 2400 -# U D U U 3600 -# U U D D 4800 -# U U D U 7200 -# U U U D 9600 -# U U U U 19200 +# F1 \E[[A +# F2 \E[[B +# F3 \E[[C +# F4 \E[[D +# F5 \E[[E +# F6 \E[17~ +# F7 \E[18~ +# F8 \E[19~ +# F9 \E[20~ +# F10 \E[21~ +# F11 \E[23~ +# F12 \E[24~ # -# S1 5 6 7 8 -# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) -# U D X U 7N2 -# U U D D 7O1 -# U U D U 7O2 -# U U U D 7E1 -# U U U U 7E2 -# D D X D 8N1 -# D D X U 8N2 -# D U D D 8O1 -# D U U U 8E2 +# Delete \E[3~ +# Down Arrow \E[B +# End \E[4~ +# Home \E[1~ +# Insert \E[2~ +# Left Arrow \E[D +# Page Down \E[6~ +# Page Up \E[5~ +# Right Arrow \E[C +# Up Arrow \E[A # -# S1 9 Autowrap -# U on -# D off +# Shift-F1 \E[25~ +# Shift-F2 \E[26~ +# Shift-F3 \E[27~ +# Shift-F4 \E[28~ +# Shift-F5 \E[29~ +# Shift-F6 \E[30~ +# Shift-F7 \E[31~ +# Shift-F8 \E[32~ +# Shift-F9 \E[33~ +# Shift-F10 \E[34~ +# Shift-F11 \E[35~ +# Shift-F12 \E[36~ # -# S1 10 CR/LF -# U do CR/LF when CR received -# D do CR when CR received +# Ctrl-F1 \E[47~ +# Ctrl-F2 \E[48~ +# Ctrl-F3 \E[49~ +# Ctrl-F4 \E[50~ +# Ctrl-F5 \E[51~ +# Ctrl-F6 \E[52~ +# Ctrl-F7 \E[53~ +# Ctrl-F8 \E[54~ +# Ctrl-F9 \E[55~ +# Ctrl-F10 \E[56~ +# Ctrl-F11 \E[57~ +# Ctrl-F12 \E[58~ # -# S2 1 Mode -# U block -# D conversational +# Ctrl-Delete \E[43~ +# Ctrl-Down Arrow \E[38~ +# Ctrl-End \E[44~ +# Ctrl-Home \E[41~ +# Ctrl-Insert \E[42~ +# Ctrl-Left Arrow \E[39~ +# Ctrl-Page Down \E[46~ +# Ctrl-Page Up \E[45~ +# Ctrl-Right Arrow \E[40~ +# Ctrl-Up Arrow \E[37~ # -# S2 2 Duplex -# U half -# D full +# Alt-F1 \E[59~ +# Alt-F2 \E[60~ +# Alt-F3 \E[61~ +# Alt-F4 \E[62~ +# Alt-F5 \E[63~ +# Alt-F6 \E[64~ +# Alt-F7 \E[65~ +# Alt-F8 \E[66~ +# Alt-F9 \E[67~ +# Alt-F10 \E[68~ +# Alt-F11 \E[79~ +# Alt-F12 \E[80~ # -# S2 3 Hertz -# U 50 -# D 60 +# Alt-Delete \E[65~ +# Alt-Down Arrow \E[60~ +# Alt-End \E[66~ +# Alt-Home \E[41~ +# Alt-Insert \E[64~ +# Alt-Left Arrow \E[61~ +# Alt-Page Down \E[68~ +# Alt-Page Up \E[67~ +# Alt-Right Arrow \E[62~ +# Alt-Up Arrow \E[59~ # -# S2 4 Edit mode -# U local -# D duplex +# Also: +# Alt-A \E[82~ +# Alt-B \E[82~ +# Alt-C \E[83~ +# Alt-D \E[84~ +# Alt-E \E[85~ +# Alt-F \E[86~ +# Alt-G \E[87~ +# Alt-H \E[88~ +# Alt-I \E[89~ +# Alt-J \E[90~ +# Alt-K \E[91~ +# Alt-L \E[92~ +# Alt-M \E[93~ +# Alt-N \E[94~ +# Alt-O \E[95~ +# Alt-P \E[96~ +# Alt-Q \E[97~ +# Alt-R \E[98~ +# Alt-S \E[99~ +# Alt-T \E[100~ +# Alt-U \E[101~ +# Alt-V \E[102~ +# Alt-W \E[103~ +# Alt-X \E[104~ +# Alt-Y \E[105~ +# Alt-Z \E[106~ +djgpp|ANSI emulation for DJGPP alpha, + am, bce, msgr, xhp, xon, xt, + colors#8, it#8, pairs#64, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j + \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v + \301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, + clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, + kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n, + op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%? + %p6%t;1%;%?%p7%t;8%;m, + sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, + +djgpp203|Entry for DJGPP 2.03, + OTbs, am, + cols#80, it#8, lines#25, + bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, + kcud1=\n, nel=\r\n, + +djgpp204|Entry for DJGPP 2.04, + OTbs, am, AX, + colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, + clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, + kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, + kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, + +#### U/Win + +# This is tested using U/Win's telnet. Scrolling is omitted because it is +# buggy. Another odd bug appears when displaying "~" in alternate character +# set (the emulator spits out error messages). Compare with att6386 -TD +uwin|U/Win 3.2 console, + am, eo, in, msgr, xenl, xon, + colors#8, it#8, ncv#58, pairs#64, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i + \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u + \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, + ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP, + kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, + khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8, + rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, + rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, + smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, + +#### Microsoft (miscellaneous) + +# This entry fits the Windows NT console when the _POSIX_TERM environment +# variable is set to 'on'. While the Windows NT POSIX console is seldom used, +# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP +# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating +# systems is not, and (surprise!) they match very well. # -# S2 5 Cursor type -# U underline -# D block +# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up +# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only +# are the installation instructions a pile of mind-numbing bureaucratese, +# but the termcap entry is actually broken and unusable as given; the :do: +# capability is misspelled "d". # -# S2 6 Cursor down key -# U send ^J -# D send ^V +# To use this, you need to a bunch of environment variables: # -# S2 7 Screen colour -# U green on black -# D black on green +# SET _POSIX_TERM=on +# SET TERM=ansi +# SET TERMCAP=location of termcap file in POSIX file format +# which is case-sensitive. +# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap +# SET TMP=//C/TEMP # -# S2 8 DSR status (pin 6) -# U disconnected -# D connected +# Important note: setting the TMP environment variable in POSIX style renders +# it incompatible with a lot of other applications, including Visual C++. So +# you should have a separate command window just for vi. All the other +# variables may be permanently set in the Control Panel\System applet. # -# S2 9 DCD status (pin 8) -# U disconnected -# D duplex +# You can find out more about the restrictions of this facility at +# . # -# S2 10 DTR status (pin 20) -# U disconnected -# D duplex -# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added , , , -# , , , , from SCO entry -- esr) -tvi910|televideo model 910, - OTbs, am, msgr, - cols#80, it#8, lines#24, xmc#1, - bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, - home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, - if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, - vpa=\E[%p1%{32}%+%c, use=adm+sgr, -# From: Alan R. Rogers -# as subsequently hacked over by someone at SCO -# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) -# -# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): -# -# S1 1 2 3 4: -# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 -# D U D D 135 D U D U 150 D U U D 300 D U U U 600 -# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 -# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 -# -# S1 5 6 7 8: -# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 -# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 -# D U D D 8O1 D U U U 8E2 -# -# S1 9 Autowrap (U = on, D = off) -# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) -# S2 1 Mode (U = block, D = conversational) -# S2 2 Duplex (U = half, D = full) -# S2 3 Hertz (U = 50, D = 60) -# S2 4 Edit mode (U = local, D = duplex) -# S2 5 Cursor type (U = underline, D = block) -# S2 6 Cursor down key (U = send ^J, D = send ^V) -# S2 7 Screen colour (U = green on black, D = black on green) -# S2 8 DSR status (pin 6) (U = disconnected, D = connected) -# S2 9 DCD status (pin 8) (U = disconnected, D = connected) -# S2 10 DTR status (pin 20) (U = disconnected, D = connected) +# From: Federico Bianchi , 15 Jan 1997 +ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, + am, bw, msgr, + cols#80, it#8, lines#25, + bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, + kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, + ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, +# From: jew@venus.sunquest.com +# Date: 19 Feb 93 23:41:07 GMT +# Here's a combination of ansi and vt100 termcap +# entries that works nearly perfectly for me +# (Gateway 2000 Handbook and Microsoft Works 3.0): +pcmw|PC running Microsoft Works, + am, xenl, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, + cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, + cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, + ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, + rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, + ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, + tbc=\E[3g$<2/>, + +# From: Federico Bianchi +# This is the entry for the OpenNT terminal. +# The ntconsole name is for backward compatibility. +# This is for OpenNT 2.0 and later. +# Later OpenNT was renamed to Interix. # -tvi910+|televideo 910+, - dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, - kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, - kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, - ll=\E=7\s, use=tvi910, +# Presently it is distributed by Microsoft as Services For Unix (SFU). +# The 3.5 beta contained ncurses 4.2 (that is header files and executables, +# the documentation dated from 1.9.9e) -TD +# +# For a US keyboard, with 12 function-kecbt=\E[Z, ys, +# kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z, +# kf13-kf24 use the shift-key +# kf25-kf36 use the left alt-key +# kf37-kf38 use the control-key +# kf49-kf60 use the shift- and control-keys +# The shifted cursor keys send the sequences originally used for kf61-kf64: +# down=\EF+ (kf61) +# up=\EF- (kf62) +# left=\EF^ (unassigned) +# right=\EF$ (kf64) -# (tvi912: removed obsolete ":ma=^K^P^L :", added and -# from BRL entry -- esr) -tvi912|tvi914|tvi920|old televideo 912/914/920, - OTbs, OTpt, am, msgr, - cols#80, it#8, lines#24, xmc#1, - bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, - ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, - il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, - kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, - kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, - kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, - tbc=\E3, -# We got some new tvi912c terminals that act really weird on the regular -# termcap, so one of our gurus worked this up. Seems that cursor -# addressing is broken. -tvi912cc|tvi912 at cowell college, - cup@, use=tvi912c, +interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, + am, bce, msgr, + cols#80, it#8, lines#25, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j + \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v + \301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, + kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, + kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, + kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, + kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, + kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, + kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, + kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, + kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, + kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, + kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, + kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, + kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, + kf8=\EF8, kf9=\EF9, khome=\E[H, kich1=\E[L, kind=\EF+, + kll=\E[U, knp=\E[T, kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, + op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, + rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, + sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, + smul=\E[4m, use=klone+color, -# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C -# From: Benjamin C. W. Sittler -# -# Someone has put a scanned copy of the manual online at: -# http://vt100.net/televideo/912b-om/ +opennt-35|ntconsole-35|OpenNT-term35 compatible with color, + lines#35, use=opennt, + +opennt-50|ntconsole-50|OpenNT-term50 compatible with color, + lines#50, use=opennt, + +opennt-60|ntconsole-60|OpenNT-term60 compatible with color, + lines#60, use=opennt, + +opennt-100|ntconsole-100|OpenNT-term100 compatible with color, + lines#100, use=opennt, + +# OpenNT wide terminals +opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, + cols#125, use=opennt, + +opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, + lines#35, use=opennt-w, + +opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, + lines#50, use=opennt-w, + +opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, + lines#60, use=opennt-w, + +opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, + cols#132, use=opennt, + +# OpenNT terminals with no smcup/rmcup (names match termcap entries) +interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, + rmcup@, smcup@, use=opennt, + +opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, + lines#35, use=opennt-nti, + +opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, + lines#50, use=opennt-nti, + +opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, + lines#60, use=opennt-nti, + +opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, + lines#100, use=opennt-nti, + +######## COMMON TERMINAL TYPES # -# These terminals were produced ca. 1979, and had a 12" monochrome -# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit -# ASCII, and were generally similar to adm3a but with attributes -# (including some with magic cookies), fancy half-duplex mode, and -# different bugs. +# This section describes terminal classes and maker brands that are still +# quite common, but have proprietary command sets not blessed by ANSI. # -# Some operations reqire truly incredible amounts of padding. The -# insert_line () and delete_line () operations in particular -# are so slow as to be nearly unusable. + +#### Altos # -# There may or may not have been a separate, earlier series of 912/920 -# terminals (without the "B" and "C" suffix); I have never seen one, -# and the manual only describes the "B" and "C" series. The 912 and 920 -# are quite distinct from the 914 and 924, which were much nicer non- -# magic-cookie terminals similar to the 950. +# Altos made a moderately successful line of UNIX boxes. In 1990 they were +# bought out by Acer, a major Taiwanese manufacturer of PC-clones. +# Acer has a web site at http://www.acer.com. # -# This is a new description for the following TeleVideo terminals, -# distinguished chiefly by their keyboards: +# Altos descriptions from Ted Mittelstaedt 4 Sep 1993 +# His comments suggest they were shipped with the system. # -# TVI-912B - very odd layout, no function keys (84 keys) -# TVI-920B - typewriter layout, no function keys (103 keys) -# TVI-912C - very odd layout, function keys F1-F11 (82 keys) -# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) + +# (altos2: had extension capabilities +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ +# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ +# :HL=^AP\r:SP=\E[i:\ +# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ +# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ +# Comparison with the k* capabilities makes it obvious that the c* things are +# shift keys. I have renamed them to keys 32 and up accordingly. Also, +# :sr: was given as a boolean-- esr) +altos2|alt2|altos-2|altos II, + cols#80, it#8, lines#24, xmc#0, + clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, + if=/usr/share/tabset/vt100, il1=\E[L, ind=\n, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, + kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, + kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, + kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, + kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, + kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, + nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, + smam=\E[?7h, smso=\E[7m, smul=\E[4m, +# (altos3: had extension capabilities +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ +# :HL=^AP\r:SP=\E[i:\ +# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: +altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, + blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, +altos4|alt4|altos-4|altos IV, + use=wy50, +# (altos7: had extension capabilities: +# :GG#0:GI=\EH8:GF=\EH7:\ +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# Comparison with the k* capabilities makes it obvious that the c* things are +# shift keys. I have renamed them to keys 32 and up accordingly. I have +# also made this entry relative to adm12 in order to give it an . The +# imported by use=adm+sgr may work, let me know. -- esr) +altos7|alt7|altos VII, + am, mir, + cols#80, lines#24, xmc#0, + acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, + clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, + ind=\n, invis=\EG1, + is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, + kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, + kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, + kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, + kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, + kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, + knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej, + rmir=\Er, smir=\Eq, use=adm+sgr, +altos7pc|alt7pc|altos PC VII, + kend=\ET, use=altos7, + +#### Hewlett-Packard (hp) # -# To choose a setting for the TERM variable, start with the model: +# Hewlett-Packard +# 8000 Foothills Blvd +# Roseville, CA 95747 +# Vox: 1-(916)-785-4363 (Technical response line for VDTs) +# 1-(800)-633-3600 (General customer support) # -# Model || base name -# ----------||----------- -# TVI-912B || tvi912b -# TVI-912C || tvi912c -# TVI-920B || tvi920b -# TVI-920C || tvi920c # -# Then add a suffix from the following table describing installed options -# and how you'd like to use the terminal: +# As of March 1998, HP no longer has any terminals in production. +# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being +# supported (they still have parts). So are the 2392a and 2394a. +# See the WORKSTATION CONSOLES section for the 700s. # -# Use Video | Second | Visual | Magic | Page || feature -# Attributes | Page | Bell | Cookies | Print || suffix -# ------------|--------|--------|---------|-------||--------- -# No | No | N/A | N/A | No || -unk -# No | No | N/A | N/A | Yes || -p -# No | Yes | No | N/A | No || -2p-unk -# No | Yes | No | N/A | Yes || -2p-p -# No | Yes | Yes | N/A | No || -vb-unk -# No | Yes | Yes | N/A | Yes || -vb-p -# Yes | No | N/A | No | N/A || -# Yes | No | N/A | Yes | N/A || -mc -# Yes | Yes | No | No | N/A || -2p -# Yes | Yes | No | Yes | N/A || -2p-mc -# Yes | Yes | Yes | No | N/A || -vb -# Yes | Yes | Yes | Yes | N/A || -vb-mc + +# Generic HP terminal - this should (hopefully) work on any HP terminal. +hpgeneric|hp|hewlett-packard generic terminal, + OTbs, OTpt, am, da, db, mir, xhp, + cols#80, lines#24, lm#0, vt#6, + bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, + ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, + ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, + +hp110|hewlett-packard model 110 portable, + lines#16, use=hpgeneric, + +hp+pfk+cr|hp function keys with CR, + kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, + kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, + +hp+pfk-cr|hp function keys w/o CR, + kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, + kf8=\Ew, + +# The hp2621s use the same keys for the arrows and function keys, +# but not separate escape sequences. These definitions allow the +# user to use those keys as arrow keys rather than as function +# keys. +hp+pfk+arrows|hp alternate arrow definitions, + kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, + kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, + kll=\Eq\r, kri=\Es\r, + +hp+arrows|hp arrow definitions, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + kind=\ES, kll=\EF, kri=\ET, + +# Generic stuff from the HP 262x series # -# So e.g. a model 920 C with second page memory option, visual bell -# and no magic cookies would be tvi920c-vb; a model 912 B without the -# second page memory option and using magic cookies would be -# tvi912b-mc +hp262x|HP 262x terminals, + xhp, + blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, + invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, + kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, + krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, + sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%| + %;%?%p4%t%{65}%|%;%c, + sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, + +# Note: no on HPs since that homes to top of memory, not screen. +# Due to severe 2621 braindamage, the only way to get the arrow keys to +# transmit anything at all is to turn on the function key labels +# with , and even then the user has to hold down shift! +# The default 2621 turns off the labels except when it has to to +# enable the function keys. If your installation prefers labels +# on all the time, or off all the time (at the "expense" of the +# function keys), use 2621-nl or 2621-wl. # -# PADDING +# Note: there are newer ROMs for 2621's that allow you to set +# strap A so the regular arrow keys xmit \EA, etc, as with the +# 2645. However, even with this strap set, the terminal stops +# xmitting if you reset it, until you unset and reset the strap! +# Since there is no way to set/unset the strap with an escape +# sequence, we don't use it in the default. +# If you like, you can use 2621-ba (brain-damaged arrow keys). +hp2621-ba|2621 w/new rom and strap A set, + rmkx@, smkx@, use=hp+arrows, use=hp2621, + +# hp2621 with function labels. Most of the time they are off, +# but inside vi, the function key labels appear. You have to +# hold down shift to get them to xmit. +hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, + is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, +hp2621-fl|hp 2621, + xhp@, xon, + pb#19200, + cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, + ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, + use=hp+pfk+cr, use=hpgeneric, + +# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p +hp2621p|hp 2621 with printer, + mc4=\E&p13C, mc5=\E&p11C, use=hp2621, + +hp2621p-a|hp2621p with fn as arrows, + use=hp+pfk+arrows, use=hp2621p, + +# hp2621 with k45 keyboard +hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, + +# 2621 using all 48 lines of memory, only 24 visible at any time. +hp2621-48|48 line 2621, + lines#48, + cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, + use=hp2621, + +# 2621 with no labels ever. Also prevents vi delays on escape. +hp2621-nl|hp 2621 with no labels, + kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, + use=hp2621-fl, + +# Needed for UCB ARPAVAX console, since lsi-11 expands tabs +# (wrong). # -# At 9600 baud, the terminal is prone to overflow its input buffer -# during complex operations (insert/delete -# character/line/screen/page), and it does not signal this over the -# RS232 cable. The typical symptom of an overrun is that the terminal -# starts beeping, and output becomes garbled. +hp2621-nt|hp 2621 w/no tabs, + ht@, use=hp2621, + +# Hp 2624 B with 4 or 10 pages of memory. # -# The padding delays in this terminfo were derived using tack(1) -# running on a Linux box connected to a TVI-920C with a later-model -# (A49C1-style) ROM running at 9600 baud, so your mileage may -# vary. The numbers below seem to give the terminal enough time so -# that it doesn't overflow its input buffer and start losing -# characters. +# Some assumptions are made with this entry. These settings are +# NOT set up by the initialization strings. # -# KEYS +# Port Configuration +# RecvPace=Xon/Xoff +# XmitPace=Xon/Xoff +# StripNulDel=Yes # -# If you want to use the FUNCT key on a tvi912[bc], use the -# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from -# the following table (these also work on the 920 series): +# Terminal Configuration +# InhHndShk=Yes +# InhDC2=Yes +# XmitFnctn(A)=No +# InhEolWrp=No # -# Unshifted Function Keys: +# Note: the 2624 DOES have a true , believe it or not! # -# Key | capname|| Equivalent -# -----|--------||------------ -# F1 | || FUNCT + @ -# F2 | || FUNCT + A -# F3 | || FUNCT + B -# F4 | || FUNCT + C -# F5 | || FUNCT + D -# F6 | || FUNCT + E -# F7 | || FUNCT + F -# F8 | || FUNCT + G -# F9 | || FUNCT + H -# F10 | || FUNCT + I -# F11 | || FUNCT + J +# The 2624 has an "error line" to which messages can be sent. +# This is CLOSE to what is expected for a "status line". However, +# after a message is sent to the "error line", the next carriage +# return is EATEN and the "error line" is turned back off again! +# So I guess we can't define , , , , , . # -# Shifted Function Keys: +# This entry supports emacs (and any other program that uses raw +# mode) at 4800 baud and less. I couldn't get the padding right +# for 9600. # -# SHIFT + Key | capname|| Equivalent -# -------------|--------||------------ -# SHIFT + F1 | || FUNCT + ` -# SHIFT + F2 | || FUNCT + a -# SHIFT + F3 | || FUNCT + b -# SHIFT + F4 | || FUNCT + c -# SHIFT + F5 | || FUNCT + d -# SHIFT + F6 | || FUNCT + e -# SHIFT + F7 | || FUNCT + f -# SHIFT + F8 | || FUNCT + g -# SHIFT + F9 | || FUNCT + h -# SHIFT + F10 | || FUNCT + i -# SHIFT + F11 | || FUNCT + j +# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) +hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, + da, db, + lm#96, + flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp, + +# This hp2626 entry does not use any of the fancy windowing stuff +# of the 2626. # -# PORTS AND SWITCH SETTINGS +# Indeed, terminfo does not yet handle such stuff. Since changing +# any window clears memory, it is probably not possible to use +# this for screen opt. # -# Here are the switch settings for the TVI-912B/TVI-920B and -# TVI-912C/TVI-920C: +# ed is incredibly slow most of the time - I am guessing at the +# exact padding. Since the terminal uses xoff/xon this is intended +# only for cost computation, so that the terminal will prefer el +# or even dl1 which is probably faster! # -# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: -# 2: 9600 3: 4800 4: 2400 5: 1200 -# 6: 600 7: 300 8: 150 9: 75 -# 10: 110 +# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only +# extra slow on the last line of the window. # -# S2 UART/Terminal options: -# Up Down -# 1: Not used Not allowed -# 2: Alternate character set Standard character set -# 3: Full duplex Half duplex -# 4: 50 Hz refresh 60 Hz refresh -# 5: No parity Send parity -# 6: 2 stop bits 1 stop bit -# 7: 8 data bits 7 data bits -# 8: Not used Not allowed on Rev E or lower -# 9: Even parity Odd parity -# 10: Steady cursor Blinking cursor -# (On Rev E or lower, use W25 instead of switch 10.) +# The padding probably should be changed. # -# S5 UART/Terminal options: -# Open Closed -# 1: P3-6 Not connected DSR received on P3-6 -# 2: P3-8 Not connected DCD received on P3-8 +hp2626|hp2626a|hp2626p|hp 2626, + da, db, + lm#0, pb#19200, + ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, + is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr, + use=hp+labels, use=scrhp, + +# This entry is for sysline. It allocates a 23 line window with +# a 115 line workspace for regular use, and a 1 line window for +# the status line. # -# 3 Open, 4 Open: P3-20 Not connected -# 3 Open, 4 Closed: DTR on when terminal is on -# 3 Closed, 4 Open: DTR is connected to RTS -# 3 Closed, 4 Closed: Not allowed +# This assumes port 2 is being used. +# Turn off horizontal line, Create ws #1 with 115 lines, +# Create ws #2 with 1 line, Create window #1 lines 1-23, +# Create window #2 lines 24-24, Attach cursor to workspace #1. +# Note that this clears the tabs so it must be done by tset before +# it sets the tabs. # -# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, -# all data transmitted out of the modem port (P3) will also be -# transmitted out of the printer port (P4). +hp2626-s|hp 2626 using only 23 lines, + eslok, hs, + lines#23, + fsl=\E&d@\E&w7f2p1I\E&w4f1I, + is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S + \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r, + tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, +# Force terminal back to 24 lines after being 23. +hp2626-ns|hp 2626 using all 24 lines, + is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S + \s\E&w3f2I\s\E&w7f2p1I\s\r, + use=hp2626, +# Various entries useful for small windows on 2626. +hp2626-12|hewlett-packard 2626 12 lines, + lines#12, use=hp2626, +hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, + cols#40, lines#12, use=hp2626, +hp2626-x40|hewlett-packard 2626 40 columns, + cols#40, use=hp2626, +hp2626-12-s|hewlett-packard 2626 11 lines plus status, + lines#11, use=hp2626-s, + # -# 6 Open, 7 Open: Not allowed -# 6 Open, 7 Closed: 20ma current loop input -# 6 Closed, 7 Open: RS232 input -# 6 Closed, 7 Closed: Not allowed -# -# Jumper options: -# If the jumper is installed, the effect will occur (the next time the terminal -# is switched on). -# -# S4/W31: Enables automatic LF upon receipt of CR from -# remote or keyboard. -# S4/W32: Enables transmission of EOT at the end of Send. If not -# installed, a carriage return is sent. -# S4/W33: Disables automatic carriage return in column 80. -# S4/W34: Selects Page Print Mode as initial condition. If not -# installed, Extension Mode is selected. -# -# NON-STANDARD CAPABILITIES -# -# Sending or returns a cursor position report in the format -# YX\r, where Y and X are as in . This format is described in -# and , but it's not clear how one should write an -# appropriate scanf string, since we need to subtract %' ' from the -# character after reading it. The capability is used by tack(1) -# to synchronize during padding tests, and seems to work for that -# purpose. -# -# This description also includes the obsolete termcap capabilities -# has_hardware_tabs () and backspaces_with_bs (). -# -# FEATURES NOT YET DESCRIBED IN THIS TERMINFO -# -# The FUNCT modifier actually works with every normal key by sending -# ^AX\r, where X is the sequence normally sent by that key. This is a -# sort of meta key not currently describable in terminfo. -# -# There are quite a few other keys (especially on the 920 models,) but -# they are for the most part only useful in block mode. -# -# These terminals have lots of forms manipulation features, mainly -# useful in block mode, including "clear X to nulls" (vs. "clear X to -# spaces"; nulls are sentinels for "send X" operations); "send X" -# operations for uploading all or part of the screen; and block-mode -# editing keys (they don't send escape sequences, but manipulate video -# memory directly). Block mode is used for local editing, and protect -# mode (in conjunction with the "write protect" attribute, -# a.k.a. half-intensity outside of protect mode) is used to control -# which parts of the screen are edited/sent/printed (by ). -# -# There are at least two major families of ROM, "early" and -# A49B1/A49C1; the major difference seems to be that the latter ROMs -# support a few extra escape sequences for manipulating the off-screen -# memory page, and for sending whole pages back to the host (mainly -# useful in block mode.) The descriptions in this file don't use any -# of those sequences: set cursor position including page (\E-PYX, -# where P is \s for page 0 and ! for page 1 [actually only the LSB of -# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are -# as in ); read cursor position (\E/), which is analogous to -# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX -# are as in , and some "send page" features mainly useful for -# forms manipulation. -# -# The keyboard enable (\E") and disable (\E#) sequences are unused, -# except that a terminal reset () enables the keyboard. -# -# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) -# enabled in , but auto-flip is very jarring so we don't use it. -# -# BUGS -# -# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed -# sequences (I infer that in some TeleVideo terminal they may invert -# and uninvert the display) so the sequence given here is a -# cheesy page-flip instead. -# -# The back_tab () sequence (\EI) doesn't work according to -# tack(1), so it is not included in the descriptions below. -# -# It's not clear whether auto_left_margin () flag should be set -# for these terminals; tack says yes, so it is set here, but this -# differs from other descriptions I've seen. -# -# Extension print mode () echoes all characters to the printer -# port [in addition to displaying them] except for the page print mode -# sequence (); this is a slight violation of the terminfo -# definition for but I don't expect it to cause problems. We -# reset to page print mode in since it may have been enabled -# accidentally. +# hp2627 color tubes from University of Wisconsin # -# The descriptions with plus signs (+) are building blocks. +hp2627a-rev|hp 2627 with reverse video colors, + cr=\r, cud1=\n, ht=^I, ind=\n, + is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3 + \r, + kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@, + smul=\E&dD\E&v1S, use=hp2621-nl, +hp2627a|hp 2627 color terminal with no labels, + cr=\r, cud1=\n, ht=^I, ind=\n, + is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, + kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S, + rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, + use=hp2621-nl, +hp2627c|hp 2627 color (cyan) terminal with no labels, + cr=\r, cud1=\n, ht=^I, ind=\n, + is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, + kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a, -tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), - OTbs, OTpt, am, bw, - cols#80, it#8, lines#24, - bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, - dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, - home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, - if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, - ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, - kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, - mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, - u7=\E?, u8=%c%c\r, u9=\E?, +# hp2640a doesn't have the Y cursor addressing feature, and C is +# memory relative instead of screen relative, as we need. +# +hp2640a|hp 2640a, + cup@, rmkx@, smkx@, use=hp2645, -# This isn't included in the basic capabilities because it is -# typically unusable in combination with the full range of video -# attributes, since the magic cookie attributes turn into ASCII -# control characters, and the half-intensity ("protected") attribute -# converts all affected characters to spaces. +hp2640b|hp2644a|hp 264x series, + rmkx@, smkx@, use=hp2645, -tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, - mc0=\EP, +# (hp2641a: removed unknown :gu: -- esr) +hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, + am, da, db, mir, xhp, + cols#80, lines#24, + bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, + ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, + if=/usr/share/tabset/std, il1=\EL, ind=\n, + is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, + rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, + vpa=\E&a%p1%2dY, -# This uses half-intensity mode () for standout (), and -# exposes no other attributes (half-intensity is the only attribute -# that does not generate a magic cookie.) +# This terminal should be used at 4800 baud or less. It needs padding for +# plain characters at 9600, I guessed at an appropriate cr delay. It really +# wants ^E/^F handshaking, but that doesn't work well even if you write +# software to support it. +hp2645|hp45|HP 2645 series, + pb#9600, + blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, + kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, + rmkx=\E&s0A, + sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%| + %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, + sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, +# You should use this terminal at 4800 baud or less. +hp2648|hp2648a|HP 2648a graphics terminal, + clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, + dch1=\EP$<7>, ip=$<5>, use=hp2645, -tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, - msgr, - dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, - smso=\E), +# The HP 150 terminal is a fairly vanilla HP terminal, with the +# clreol standout problem. It also has graphics capabilities and +# a touch screen, which we don't describe here. +hp150|hewlett packard Model 150, + OTbs, use=hp2622, -# Full magic-cookie attribute support, with half-intensity reverse -# video for standout. Note that we add a space in the sequence -# to give a consistent magic-cookie count. Also note that uses -# backspacing (in the TVI-supported order) to apply all requested -# attributes with only a single magic cookie. +# HP 2382a terminals, "the little ones." They don't have any +# alternate character set support and sending out ^N/^O will +# leave the screen blank. +hp2382a|hp2382|hewlett packard 2382a, + da, db, + lh#1, lm#48, + acsc@, + pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2 + %s, + rmacs@, + sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga + %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+ + %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64} + %+%e%{64}%;%;%c, + sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, -tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, - xmc#1, - blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, - rmul=\Em, - sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, - sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, +hp2621-a|hp2621a-a|hp2621 with fn as arrows, + use=hp+pfk+arrows, use=hp2621-fl, -# This uses the second page memory option to save & restore screen -# contents. If your terminal is missing the option, this description -# should still work, but that has not been tested. +# newer hewlett packard terminals -tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, - flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, - smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, +newhpkeyboard|generic entry for HP extended keyboard, + kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, + kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, + kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, + use=hp+pfk-cr, -# This simulates flashing by briefly toggling to the other page -# (kludge!) +newhp|generic entry for new hewlett packard terminals, + am, bw, mir, xhp, xon, + cols#80, lines#24, pb#4800, + acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm + Fn/q\,t5u6v8w7x., + bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H, + cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, + dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n, + invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n, + pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, + rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, + sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga + %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+ + %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64} + %+%e%{64}%;%;%c%?%p9%t\016%e\017%;, + sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, + tbc=\E3, use=newhpkeyboard, -tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, - bel=\EK$<100>\EK, use=tvi912b+2p, +memhp|memory relative addressing for new HP ttys, + vt#6, + clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, + cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, + home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, + mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, -# Function keys ( .. are shifted .. ) +scrhp|screen relative addressing for new HP ttys, + clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, + cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, + cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, + home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, + mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, -tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, - kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, - kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, - kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, - kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, +# (hp+labels: added label values from a BRL termcap -- esr) +hp+labels|"standard" label info for new HP ttys, + lh#2, lw#8, nlab#8, + lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, + pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2 + %s, + rmln=\E&j@, smln=\E&jB, -# Combinations of the basic building blocks +hp+printer|"standard" printer info for HP ttys, + ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, -tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), - use=tvi912b+2p, use=tvi912b-unk, -tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), - use=tvi912b+vb, use=tvi912b-unk, +# The new hp2621b is kind of a cross between the old 2621 and the +# new 262x series of machines. It has dip-switched options. +# The firmware has a bug in it such that if you give it a null +# length label, the following character is eaten! +hp2621b|hp 2621b with old style keyboard, + lh#1, lm#48, lw#8, nlab#8, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + kind=\ET, kll=\EF, kri=\ES, + pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c + %;%p2%s\E%{111}%p1%+%c\r, + smln=\E&jB, use=hp2621, -tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), - use=tvi912b+printer, use=tvi912b-unk, +hp2621b-p|hp 2621b with printer, + use=hp+printer, use=hp2621b, -tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), - use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, +# hp2621b - new 2621b with new extended keyboard +# these are closer to the new 26xx series than the other 2621b +hp2621b-kx|hp 2621b with extended keyboard, + use=newhpkeyboard, use=hp2621b, -tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), - use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, +hp2621b-kx-p|hp 2621b with new keyboard & printer, + use=hp+printer, use=hp2621b-kx, -tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), - use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, - -tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), - use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, - -tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), - use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, +# Some assumptions are made in the following entries. +# These settings are NOT set up by the initialization strings. +# +# Port Configuration +# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes +# +# Terminal Configuration +# InhHndShk(G)=Yes InhDC2(H)=Yes +# XmitFnctn(A)=No InhEolWrp=No +# +# +# Hp 2622a & hp2623a display and graphics terminals +# +hp2622|hp2622a|hp 2622, + da, db, + lm#0, pb#19200, + is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp, -tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), - use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, +# The 2623 is a 2622 with extra graphics hardware. +hp2623|hp2623a|hp 2623, + use=hp2622, -tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), - use=tvi912b+dim, use=tvi912b-unk, +hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, + use=hp+printer, use=hp2624, -tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), - use=tvi912b+mc, use=tvi912b-unk, +# The hewlett packard B can have an optional extra 6 pages of memory. +hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, + lm#240, use=hp2624, -tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), - use=tvi920b+fn, use=tvi912b-unk, +hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, + lm#240, use=hp2624b-p, -tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), - use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, +# Color manipulations for HP terminals +hp+color|hp with colors, + ccc, + colors#16, ncv#17, pairs#7, + initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e. + %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1 + %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%= + %t1%e.%p7%d%;z%p1%dI, + oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5 + I\E&v1b1c6I\E&v1x1y7I, + op=\E&v0S, scp=\E&v%p1%dS, -tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), - use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, +# sets the screen to be 80 columns wide +hp2397a|hp2397|hewlett packard 2397A color terminal, + is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, -tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), - use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, +# HP 700/44 Setup parameters: +# Terminal Mode HP-PCterm +# Inhibit Auto Wrap NO +# Status Line Host Writable +# PC Character Set YES +# Twenty-Five Line Mode YES +# XON/XOFF @128 or 64 (sc) +# Keycode Mode NO or YES (sc) +# Backspace Key BS or BS/DEL +# +# sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; +# \E\\? does not turn off keycode mode +# sets alternate start/stop; keycode on +hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, + am, eo, xenl, xon, + cols#80, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x + \263, + bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, + cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, + ind=\n, + is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, + kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, + kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, + kpp=\E[5~, rmam=\E[?7l, + rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smam=\E[?7h, + smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, + smul=\E[4m, xoffc=g, xonc=e, +# +# (hp2392: copied here from hpex -- esr) +hp2392|239x series, + cols#80, + cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, + kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, + kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, + rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, + use=hpsub, -tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), - use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, - use=tvi912b-unk, +hpsub|hp terminals -- capability subset, + am, da, db, mir, xhp, xon, + lines#24, + bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, + cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, + ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, + is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, + sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, -tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), - use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, - use=tvi912b-unk, +# hpex: +# May be used for most 24 x 80 hp terminals, +# but has no padding added, so may allow runover in some terminals at high +# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and +# hp98x5 terminal emulators or hp98x6 consoles. +# Adds xy-cursor addressing, vertical cursor addressing, home, +# last line, and underline capabilities. +# +# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", +# moved here from hpsub -- esr) +hpex|hp extended capabilities, + cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H, + kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ, + smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, -tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), - use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, - use=tvi912b-unk, +# From: Ville Sulko , 05 Aug 1996 +hp2|hpex2|hewlett-packard extended capabilities newer version, + am, da, db, mir, xhp, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, + bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, + kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, + kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, + krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, + pfkey=\E&f%p1%dk%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, + pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, + rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, + sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+ + %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, + sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB, + smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, -tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), - use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, - use=tvi912b-unk, +# HP 236 console +# From: +hp236|hp236 internal terminal emulator, + OTbs, am, + cols#80, lines#24, + clear=\EF, cnorm=\EDE, cub1=^H, + cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, + dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, + sgr0=\ECI, smso=\EBI, -tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), - use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, - use=tvi912b-unk, +# This works on a hp300 console running Utah 4.3 BSD +# From: Craig Leres +hp300h|HP Catseye console, + OTbs, am, da, db, mir, xhp, + cols#128, lines#51, lm#0, xmc#0, + bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, + if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, + smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, +# From: Greg Couch +hp9837|hp98720|hp98721|HP 9000/300 workstations, + OTbs, am, da, db, mir, xhp, + cols#128, it#8, lines#46, lm#0, + bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, + kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, + sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, + tbc=\E3, vpa=\E&a%p1%dY, +# HP 9845 desktop computer from BRL +# (hp9845: removed unknown capability :gu: -- esr) +hp9845|HP 9845, + OTbs, am, da, db, eo, mir, xhp, + cols#80, lines#21, + OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, + ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, + rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, +# From: Charles A. Finnell of MITRE , developed 07SEP90 +# (hp98550: replaced /usr/share/tabset/9837 with std because ,; +# added empty to avoid warnings re / --esr) +hp98550|hp98550a|HP 9000 Series 300 color console, + OTbs, am, da, db, mir, xhp, + cols#128, it#8, lines#49, lm#0, + acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, + clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds, + kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, + kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, + knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, + rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, + smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, +# From: Victor Duchovni +# (hp700-wy: removed obsolete ":nl=^J:"; +# replaced /usr/share/tabset/hp700-wy with std because , -- esr) +hp700-wy|HP700/41 emulating wyse30, + OTbs, am, bw, mir, msgr, + cols#80, it#8, lines#24, xmc#1, + cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, + if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, + is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI, + kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, + kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, + ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, + sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, + smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, +hp70092|hp70092a|hp70092A|HP 700/92, + am, da, db, xhp, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, + acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, + bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, + cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, + dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, + hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, + kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, + kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, + krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, + rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, + smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, -tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), - use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, - use=tvi912b-unk, +bobcat|sbobcat|HP 9000 model 300 console, + am, da, db, mir, xhp, + cols#128, it#8, lines#47, xmc#0, + cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, + dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, + il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER, + rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, + smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, +gator-t|HP 9000 model 237 emulating extra-tall AAA, + lines#94, use=gator, +gator|HP 9000 model 237 emulating AAA, + bw, km, mir, ul, + cols#128, it#8, lines#47, + bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, + dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, + ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, + il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, + rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, +gator-52|HP 9000 model 237 emulating VT52, + cols#128, lines#47, use=vt52, +gator-52t|HP 9000 model 237 emulating extra-tall VT52, + lines#94, use=gator-52, -tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), - use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, +#### Honeywell-Bull +# +# From: Michael Haardt 11 Jan 93 +# -tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), - use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, - -# Televideo 921 and variants -# From: Tim Theisen 22 Sept 1995 -# (tvi921: removed :ko=bt: before translation, I see no backtab cap; -# also added empty to suppress tic warning -- esr) -tvi921|televideo model 921 with sysline same as page & real vi function, - OTbs, OTpt, am, hs, xenl, xhp, - cols#80, lines#24, xmc#0, - acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, - cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, - el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, - if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, - is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, - kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, - ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, - rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, -# without the beeper -# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; -# also added empty to suppress tic warning -- esr) -tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, - am, hs, xenl, xhp, - cols#80, lines#24, xmc#0, - acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, - cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, - el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, - ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, - invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, - kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, - kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, - nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, -# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) -tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, - dl1=\ER$<2*/>, il1=\EE$<2*/>, - is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, - kil1=\EE$<2*/>, use=tvi92B, - -# (tvi924: This used to have , . I put the new strings -# in from a BSD termcap file because it looks like they do something the -# old ones skip -- esr) -tvi924|televideo tvi924, - am, bw, hs, in, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, wsl#80, xmc#0, - bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, - cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, - cub1=^H, cud1=^V, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, - dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, - flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, - ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, - invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, - kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, - kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, - kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, - kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, - kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, - kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, - lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, - pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, - use=adm+sgr, +# Honeywell Bull terminal. Its cursor and function keys send single +# control characters and it has standout/underline glitch. Most programs +# do not like these features/bugs. Visual bell is realized by flashing the +# "keyboard locked" LED. +dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, + cols#80, lines#25, + clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X, + cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, + flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y, + kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n, +dku7003|Honeywell Bull DKU 7003 all features described, + msgr, + xmc#1, + blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, + use=dku7003-dumb, -# TVI925 DIP switches. In each of these, D = Down and U = Up, +#### Lear-Siegler (adm) # -# Here are the settings for the external (baud) switches (S1): +# These guys are long since out of the terminals business, but +# in 1995 many current terminals still have an adm type as one of their +# emulations (usually their stupidest, and usually labeled adm3, though +# these `adm3' emulations normally have adm3a+ capabilities). # -# Position Baud -# 7 8 9 10 [Printer] -# 1 2 3 4 [Main RS232] -# ----------------------------------------------------- -# D D D D 9600 -# D D D U 50 -# D D U D 75 -# D D U U 110 -# D U D D 135 -# D U D U 150 -# D U U D 300 -# D U U U 600 -# U D D D 1200 -# U D D U 1800 -# U D U D 2400 -# U D U U 3600 -# U U D D 4800 -# U U D U 7200 -# U U U D 9600 -# U U U U 19200 +# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a +# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') +# was being held to ground would trigger a send of the top line on the screen. +# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 +# hanging in the air. (Thanks to Eric Fischer, , +# for clearing up this point.) + +adm1a|adm1|lsi adm1a, + am, + cols#80, lines#24, + bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, + ind=\n, +adm2|lsi adm2, + OTbs, am, + cols#80, lines#24, + bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, +# (adm3: removed obsolete ":ma=^K^P:" -- esr) +adm3|lsi adm3, + OTbs, am, + cols#80, lines#24, + bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n, +# The following ADM-3A switch settings are assumed for normal operation: +# SPACE U/L_DISP CLR_SCRN 24_LINE +# CUR_CTL LC_EN AUTO_NL FDX +# Other switches may be set for operator convenience or communication +# requirements. I recommend +# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF +# ETX_OFF EOT_OFF +# Most of these terminals required an option ROM to support lower case display. +# Open the case and look at the motherboard; if you see an open 24-pin DIP +# socket, you may be out of luck. # +# (adm3a: some capabilities merged in from BRl entry -- esr) +adm3a|lsi adm3a, + OTbs, am, + cols#80, lines#24, + OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H, + cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, + kcuu1=^K, rs2=^N, +adm3a+|adm3a plus, + kbs=^H, use=adm3a, +# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) +adm5|lsi adm5, + xmc#1, + bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^, + rmso=\EG, smso=\EG, use=adm3a+, +# A lot of terminals other than adm11s use these. Wherever you see +# use=adm+sgr with some of its capabilities disabled, try the +# disabled ones. They may well work but not have been documented or +# expressed in the using entry. We'd like to cook up an but the +# / sequences of the using entries vary too much. +adm+sgr|adm style highlight capabilities, + invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, + smso=\EG4, smul=\EG8, +# LSI ADM-11 from George William Hartwig, Jr. via BRL +# Status line additions from Stephen J. Muir +# from . could also +# be ^Z, according to his entry. +# (adm11: =\EG4 was obviously erroneous because it also said +# =\EG4. Looking at other ADMs confirms this -- esr) +adm11|LSI ADM-11, + OTbs, am, hs, + OTkn#8, cols#80, lines#24, + OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H, + cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, + kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E), + use=adm+sgr, +# From: Andrew Scott Beals +# Corrected by Olaf Siebert , 11 May 1995 +# Supervisor mode info by Ari Wuolle, , 27 Aug 1996 +# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had +# =\Eq but that looked wrong; this is from Dave Yost +# via BRL. That entry asserted , but I've left that out because +# neither earlier nor later ADMSs have it -- esr) # -# Settings for word length and stop-bits (S1) +# You will need to get into the supervisor setup before you can set +# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should +# see a lot more setup options. # -# Position Description -# 5 6 -# --------------------------- -# U - 7-bit word -# D - 8-bit word -# - U 2 stop bits -# - D 1 stop bit +# While in supervisor setup you can also use following codes: # +# Ctrl-P Personality character selections (configure for example what +# arrow keys send, if I recall correctly) +# Ctrl-T tabs 1-80 use left&right to move and up to set and +# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor +# Ctrl-B Binary setup (probably not needed. I think that everything can +# be set using normal setup) +# Ctrl-A Answerback mode (enter answerback message) +# Ctrl-U User friendly mode (normal setup) +# Ctrl-D Defaults entire setup and function keys from EPROM tables +# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. +# Ctrl-R Reads both setup and functions keys from NVM. +# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status # -# S2 (external) settings +# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to +# RTS/CTS used nowadays with virtually every modem and computer. 19200 +# bps works fine with hardware flow control. # -# Position Up Dn Description -# -------------------------------------------- -# 1 X Local edit -# X Duplex edit (transmit editing keys) -# -------------------------------------------- -# 2 X 912/920 emulation -# X 925 -# -------------------------------------------- -# 3 X -# 4 X No parity -# 5 X -# -------------------------------------------- -# 3 X -# 4 X Odd parity -# 5 X -# -------------------------------------------- -# 3 X -# 4 X Even parity -# 5 X -# -------------------------------------------- -# 3 X -# 4 X Mark parity -# 5 X -# -------------------------------------------- -# 3 X -# 4 X Space parity -# 5 X -# -------------------------------------------- -# 6 X White on black display -# X Black on white display -# -------------------------------------------- -# 7 X Half Duplex -# 8 X -# -------------------------------------------- -# 7 X Full Duplex -# 8 X -# -------------------------------------------- -# 7 X Block mode -# 8 X -# -------------------------------------------- -# 9 X 50 Hz -# X 60 Hz -# -------------------------------------------- -# 10 X CR/LF (Auto LF) -# X CR only +# The following null-modem cable should fix this and enable you to use +# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also +# set ADM-12+ for DTR handshaking from supervisor setup. # -# S3 (internal switch) settings: +# PC Serial ADM-12+ +# -------- ------- +# 2 - 3 +# 3 - 2 +# 4 - 5 +# 5 - 20 +# 6,8 - 4 +# 7 - 7 +# 20 - 6,8 # -# Position Up Dn Description -# -------------------------------------------- -# 1 X Keyclick off -# X Keyclick on -# -------------------------------------------- -# 2 X English -# 3 X -# -------------------------------------------- -# 2 X German -# 3 X -# -------------------------------------------- -# 2 X French -# 3 X -# -------------------------------------------- -# 2 X Spanish -# 3 X -# -------------------------------------------- -# 4 X Blinking block cursor -# 5 X -# -------------------------------------------- -# 4 X Blinking underline cursor -# 5 X -# -------------------------------------------- -# 4 X Steady block cursor -# 5 X -# -------------------------------------------- -# 4 X Steady underline cursor -# 5 X -# -------------------------------------------- -# 6 X Screen blanking timer (ON) -# X Screen blanking timer (OFF) -# -------------------------------------------- -# 7 X Page attributes -# X Line attributes -# -------------------------------------------- -# 8 X DCD disconnected -# X DCD connected -# -------------------------------------------- -# 9 X DSR disconnected -# X DSR connected -# -------------------------------------------- -# 10 X DTR Disconnected -# X DTR connected -# -------------------------------------------- +adm12|lsi adm12, + OTbs, OTpt, am, mir, + OTug#1, cols#80, it#8, lines#24, + bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, + is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s + \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s + \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, + kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, + kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, + use=adm+sgr, +# (adm20: removed obsolete ":kn#7:" -- esr) +adm20|lear siegler adm20, + OTbs, am, + cols#80, it#8, lines#24, + bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L, + cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, + kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, + sgr0=\E(, smso=\E), +adm21|lear siegler adm21, + xmc#1, + bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY, + el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, + use=adm+sgr, use=adm3a, +# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, +# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; +# removed bogus-looking \200 from before . -- esr) +adm22|lsi adm22, + OTbs, am, + cols#80, lines#24, + bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, + is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0 + \0\0\0\0, + kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), +# ADM 31 DIP Switches # -# (tvi925: BSD has . I got and from there -- esr) -tvi925|televideo 925, - OTbs, am, bw, hs, ul, - cols#80, lines#24, xmc#1, - bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, - flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, - ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, - kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, - ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, - kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, - kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, - tsl=\Eh\Ef, use=adm+sgr, -# TeleVideo 925 from Mitch Bradley via BRL -# to avoid "magic cookie" standout glitch: -tvi925-hi|TeleVideo Model 925 with half intensity standout mode, - xmc@, - kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, - -# From: Todd Litwin 28 May 1993 -# Originally Tim Curry, Univ. of Central Fla., 5/21/82 -# for additional capabilities, -# The following tvi descriptions from B:pjphar and virus!mike -# is for all 950s. It sets the following attributes: -# full duplex (\EDF) write protect off (\E() -# conversation mode (\EC) graphics mode off (\E%) -# white on black (\Ed) auto page flip off (\Ew) -# turn off status line (\Eg) clear status line (\Ef\r) -# normal video (\E0) monitor mode off (\EX or \Eu) -# edit mode (\Er) load blank char to space (\Ee\040) -# line edit mode (\EO) enable buffer control (^O) -# protect mode off (\E\047) duplex edit keys (\El) -# program unshifted send key to send line all (\E016) -# program shifted send key to send line unprotected (\E004) -# set the following to nulls: -# field delimiter (\Ex0\200\200) -# line delimiter (\Ex1\200\200) -# start-protected field delimiter (\Ex2\200\200) -# end-protected field delimiter (\Ex3\200\200) -# set end of text delimiter to carriage return/null (\Ex4\r\200) +# This information comes from two versions of the manual for the +# Lear-Siegler ADM 31. # -# TVI 950 Switch Setting Reference Charts +# Main board: +# rear of case +# +-||||-------------------------------------+ +# + S1S2 ||S + +# + ||3 + +# + + +# + ||S + +# + ||4 + +# + + +# + + +# + + +# + + +# + + +# +-+ +-+ +# + + +# + S5 S6 S7 + +# + == == == + +# +----------------------------------------------+ +# front of case (keyboard) # -# TABLE 1: +# S1 - Data Rate - Modem +# S2 - Data Rate - Printer +# ------------------------ +# Data Rate Setting +# ------------------- +# 50 0 0 0 0 +# 75 1 0 0 0 +# 110 0 1 0 0 +# 134.5 1 1 0 0 +# 150 0 0 1 0 +# 300 1 0 1 0 +# 600 0 1 1 0 +# 1200 1 1 1 0 +# 1800 0 0 0 1 +# 2000 1 0 0 1 +# 2400 0 1 0 1 +# 3600 1 1 0 1 +# 4800 0 0 1 1 +# 7200 1 0 1 1 +# 9600 0 1 1 1 +# x 1 1 1 1 # -# S1 1 2 3 4 5 6 7 8 9 10 -# +-----------------------+-----+-----+-----------------------+ -# | Computer Baud Rate |Data |Stop | Printer Baud Rate | -# | |Bits |Bits | | -# +------+-----------------------+-----+-----+-----------------------+ -# | Up | See | 7 | 2 | See | -# +------+-----------------------+-----+-----+-----------------------+ -# | Down | TABLE 2 | 8 | 1 | TABLE 2 | -# +------+-----------------------+-----+-----+-----------------------+ +# S3 - Interface/Printer/Attributes +# --------------------------------- +# Printer Busy Control +# sw1 sw2 sw3 +# --------------- +# off off off Busy not active, CD disabled +# off off on Busy not active, CD enabled +# off on off Busy active on J5-20, CD disabled +# on off off Busy active on J5-19, CD disabled - Factory Set. +# on off on Busy active on J5-19, CD enabled # +# sw4 Used in conjunction with S4 for comm interface control - Fact 0 # -# S2 1 2 3 4 5 6 7 8 9 10 -# +-----+-----+-----------------+-----+-----------+-----+-----+ -# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| -# +------+-----+-----+-----------------+-----+-----------+-----+-----+ -# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | -# +------+-----+-----+-----------------+-----+-----------+-----+-----+ -# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | -# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 # -# TABLE 2: +# sw6 ON enables printer BUSY active LOW - Factory Setting +# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses # -# +-----------+-----+-----+-----+-----+-----------+ -# | Display | 1 | 2 | 3 | 4 | Baud | -# +-----------+-----+-----+-----+-----+ | -# | Printer | 7 | 8 | 9 | 10 | Rate | -# +-----------+-----+-----+-----+-----+-----------+ -# | D | D | D | D | 9600 | -# | U | D | D | D | 50 | -# | D | U | D | D | 75 | -# | U | U | D | D | 110 | -# | D | D | U | D | 135 | -# | U | D | U | D | 150 | -# | D | U | U | D | 300 | -# | U | U | U | D | 600 | -# | D | D | D | U | 1200 | -# | U | D | D | U | 1800 | -# | D | U | D | U | 2400 | -# | U | U | D | U | 3600 | -# | D | D | U | U | 4800 | -# | U | D | U | U | 7200 | -# | D | U | U | U | 9600 | -# | U | U | U | U | 19200 | -# +-----+-----+-----+-----+-----------+ +# sw7 ON - steady cursor - Factory Setting +# OFF - blinking cursor # -# TABLE 3: -# +-----+-----+-----+-----------+ -# | 3 | 4 | 5 | Parity | -# +-----+-----+-----+-----------+ -# | X | X | D | None | -# | D | D | U | Odd | -# | D | U | U | Even | -# | U | D | U | Mark | -# | U | U | U | Space | -# +-----+-----+-----+-----------+ -# X = don't care +# sw8 ON causes selected attribute character to be displayed +# OFF causes SPACE to be displayed instead - Factory Setting # -# CHART: -# +-----+-----+-----------------+ -# | 7 | 8 | Communication | -# +-----+-----+-----------------+ -# | D | D | Half Duplex | -# | D | U | Full Duplex | -# | U | D | Block | -# | U | U | Local | -# +-----+-----+-----------------+ +# S4 - Interface +# -------------- +# Modem Interface +# S3 S4 S4 S4 S4 +# sw4 sw1 sw2 sw3 sw4 +# --------------------------- +# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and +# Current Loop disabled - Factory Setting +# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect +# disabled +# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and +# Current Loop Disabled # -# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". -# I also inserted and ; the :ko: string indicated that -# should be present and all tvi native modes use the same string for this. -# Finally, note that BSD has cud1=^V. -- esr) -tvi950|televideo 950, - OTbs, am, hs, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, xmc#1, - acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, - cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, - fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, - invis@, - is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, - kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, - kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, - kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, - kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, - rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, - use=adm+sgr, +# sw5 ON disables dot stretching mode - Factory Setting +# OFF enables dot stretching mode +# sw6 ON enables blanking function +# OFF enables underline function - Factory Setting +# sw7 ON causes NULLS to be displayed as NULLS +# OFF causes NULLS to be displayed as SPACES - Factory Setting # -# is for 950 with two pages adds the following: -# set 48 line page (\E\\2) -# place cursor at page 0, line 24, column 1 (\E-07 ) -# set local (no send) edit keys (\Ek) +# S5 - Word Structure +# ------------------- +# sw1 ON enables BREAK key - Factory Setting +# OFF disables BREAK key +# sw2 ON selects 50Hz monitor refresh rate +# OFF selects 60Hz monitor refresh rate - Factory Setting # -# two page 950 adds the following: -# when entering ex, set 24 line page (\E\\1) -# when exiting ex, reset 48 line page (\E\\2) -# place cursor at 0,24,1 (\E-07 ) -# set duplex (send) edit keys (\El) when entering vi -# set local (no send) edit keys (\Ek) when exiting vi +# Modem Port Selection +# sw3 sw4 sw5 +# --------------- +# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits +# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits +# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. +# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit +# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits +# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit +# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit +# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit # -tvi950-2p|televideo950 w/2 pages, - is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, - rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, - smkx=\El, use=tvi950, +# sw6 ON sends bit 8 a 1 (mark) +# OFF sends bit 8 as 0 (space) - Factory Setting +# sw7 ON selects Block Mode +# OFF selects Conversation Mode - Factory Setting +# sw8 ON selects Full Duplex operation +# OFF selects Half Duplex operation - Factory Setting # -# is for 950 with four pages adds the following: -# set 96 line page (\E\\3) -# place cursor at page 0, line 24, column 1 (\E-07 ) +# S6 - Printer +# ------------ +# sw1, sw2, sw6, sw7 Reserved - Factory 0 # -# four page 950 adds the following: -# when entering ex, set 24 line page (\E\\1) -# when exiting ex, reset 96 line page (\E\\3) -# place cursor at 0,24,1 (\E-07 ) +# Printer Port Selection +# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 # -tvi950-4p|televideo950 w/4 pages, - is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, - rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, - smkx=\El, use=tvi950, +# sw8 ON enables Printer Port +# OFF disables Printer Port - Factory Setting # -# for reverse video 950 changes the following: -# set reverse video (\Ed) +# S7 - Polling Address +# -------------------- +# sw1-7 Establish ASCII character which designates terminal polling address +# ON = logic 0 +# OFF = logic 1 - Factory Setting +# sw8 ON enables Polling Option +# OFF disables Polling Option - Factory Setting # -# set vb accordingly (\Ed ...delay... \Eb) # -tvi950-rv|televideo950 rev video, - flash=\Ed$<200/>\Eb, - is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, - use=tvi950, - -# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv -tvi950-rv-2p|televideo950 rev video w/2 pages, - flash=\Ed$<200/>\Eb, - is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, - rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, - smkx=\El, use=tvi950, - -# tvi950-rv uses the appropriate entries from 950-4p and 950-rv -tvi950-rv-4p|televideo950 rev video w/4 pages, - flash=\Ed$<200/>\Eb, - is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, - rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, - smkx=\El, use=tvi950, -# From: Andreas Stolcke -# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; -# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in -# the :rs: string, inserted the implied by the termcap :ko: string. Note -# the :ko: string had :cl: in it, which means that one of the original -# , had to be wrong; set because that's what -# the 950 has. Finally, corrected the string to match the 950 and what -# ko implies -- esr) -# If the BSD termcap file was right, would -# also work. -tvi955|televideo 955, - OTbs, mc5i, msgr@, - it#8, xmc@, - acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, - civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, - cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, - is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, - knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, - rmam=\E[=7l, rmxon=^N, - rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, - sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, - use=tvi950, -tvi955-w|955-w|televideo955 w/132 cols, - cols#132, - is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, -# use half-intensity as normal mode, full intensity as -tvi955-hb|955-hb|televideo955 half-bright, - bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, - sgr0=\EG0\E[=5h, use=tvi955, -# From: Humberto Appleton , 880521 UT Austin -# (tvi970: removed ":sg#0:"; removed =\E[m, =\E[m; -# added ////// from BRL. -# According to BRL we could have =\E>, =\E= but I'm not sure what -# it does to the function keys. I deduced /. -# also added empty to suppress tic warning, -- esr) -tvi970|televideo 970, - OTbs, OTpt, am, da, db, mir, msgr, - cols#80, it#8, lines#24, - acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, - cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, - ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, - hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, - is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, - kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, - kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, - rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smacs=\E(B, smam=\E[?7l, - smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, - smul=\E[4m, vpa=\E[%i%p1%dd, -tvi970-vb|televideo 970 with visual bell, - flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, - use=tvi970, -tvi970-2p|televideo 970 with using 2 pages of memory, - rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, - use=tvi970, -# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars -# per line (rather than 40), Esc K chooses the normal character set. Not sure -# padding is needed, but adapted from the tvi920c termcap. The and -# strings are klutzy, but at least use no screen space. -# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew , -# its absence means =\Ev isn't safe to use. -- esr) -# From: Gene Rochlin 9/19/84. -# The ////, and caps are from BRL, which says: -# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. -tvipt|televideo personal terminal, +# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. +# +# This adm31 entry uses underline as the standout mode. +# If the adm31 gives you trouble with standout mode, check the DIP switch in +# position 6, bank @c11, 25% from back end of the circuit board. Should be +# OFF. If there is no such switch, you have an old adm31 and must use oadm31. +# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) +adm31|lsi adm31 with sw6 set for underline mode, + OTbs, am, mir, + cols#80, lines#24, + bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, + kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, + kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, + rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, +adm31-old|o31|old adm31, + rmul@, smso=\EG4, smul@, use=adm31, +# LSI ADM-36 from Col. George L. Sicherman via BRL +adm36|LSI ADM36, + OTbs, OTpt, + OTkn#4, + if=/usr/share/tabset/vt100, + is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd, +# (adm42: removed obsolete ":ma=^K^P:" -- esr) +adm42|lsi adm42, OTbs, am, cols#80, lines#24, - cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, - ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, - il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, - kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, - rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, -# From: Nathan Peterson , 03 Sep 1996 -tvi9065|televideo 9065, - am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, - wnum#0, wsl#30, - acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, - blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, - cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, - cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, - cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, - dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, - el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, - ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, - il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, - ip=$<3>, - is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, - is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, - kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, - kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, - mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, - pfkey=\E|%p1%{48}%+%c3%p2%s\031, - pfloc=\E|%p1%{48}%+%c2%p2%s\031, - pfx=\E|%p1%{48}%+%c1%p2%s\031, - pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, - rep=\E[%p2%db%p1%c, rev=\EG4, - rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, - rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, - rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, - rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, - rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, - rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, - sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;, - sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, - smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, - tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, + bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, + il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n, + kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@, + smir=\Eq, smul@, use=adm+sgr, +# The following termcap for the Lear Siegler ADM-42 leaves the +# "system line" at the bottom of the screen blank (for those who +# find it distracting otherwise) +adm42-ns|lsi adm-42 with no system line, + cbt=\EI\EF \011, clear=\E;\EF \011, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, + dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, + el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, + smir=\Eq\EF \011, use=adm42, +# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. +# The insert mode of this terminal is commented out because it's broken for our +# purposes in that it will shift the position of every character on the page, +# not just the cursor line! +# From: Michael Driscoll 10 July 1996 +adm1178|1178|lsi adm1178, + am, + cols#80, lines#24, xmc#1, + bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, + home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H, + kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0, + sgr0=\E), smso=\EG4, smul=\EG1, -#### Visual (vi) +#### Prime # -# In September 1993, Visual Technology of Westboro, Massachusetts, -# merged with White Pine Software of Nashua, New Hampshire. +# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings +# on 14 Dec 1992 and lightly edited by esr. +# Prime merged with ComputerVision in the late 1980s; you can reach them at: # -# White Pine Software may be contacted at +1 603/886-9050. -# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. +# ComputerVision Services +# 500 Old Connecticut Path +# Framingham, Mass. # -# Visual 50 from Beau Shekita, BTL-Whippany -# Recently I hacked together the following termcap for Visual -# Technology's Visual 50 terminal. It's a slight modification of -# the vt52 termcap. -# It's intended to run when the Visual 50 is in vt52 emulation mode -# (I know what you're thinking; if it's emulating a vt52, then why -# another termcap? Well, it turns out that the Visual 50 can handle -# and db(?) among other things, which the vt52 can't) -# The termcap works OK for the most part. The only problem is on -# character inserts. The whole line gets painfully redrawn for each -# character typed. Any suggestions? -# Beau's entry is combined with the vi50 entry from University of Wisconsin. -# Note especially the function. - are really l4-l6 in -# disguise; - are really l1-l3. -vi50|visual 50, - OTbs, OTpt, am, da, db, msgr, - cols#80, it#8, lines#24, - OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, - cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, - cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, - ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, - kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, - kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, - nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, -# this one was BSD & SCO's vi50 -vi50adm|visual 50 in adm3a mode, - am, msgr, +# Standout mode is dim reverse-video. +pt100|pt200|wren|fenix|prime pt100/pt200, + am, bw, mir, msgr, cols#80, it#8, lines#24, - bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, - ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, - kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, - rmso=\ET, smso=\EU, -# From: Jeff Siegal -vi55|Visual 55, - OTbs, am, mir, msgr, - cols#80, it#8, lines#24, - clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, - cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, - cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, - il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, - kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, - smir=\Ea, smso=\EU, - -# Visual 200 from BRL -# The following switch settings are assumed for normal operation: -# FULL_DUPLEX SCROLL CR -# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE -# Other switches may be set for operator convenience or communication -# requirements. -# Character insertion is kludged in order to get around the "beep" misfeature. -# (This cap is commented out because / is more efficient -- esr) -# Supposedly "4*" delays should be used for , , , , -# and strings, but we seem to get along fine without them. -vi200|visual 200, - OTbs, OTpt, am, mir, msgr, - OTkn#10, cols#80, it#8, lines#24, - acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, - cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, - cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, - el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, - kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, - kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, - kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, - kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, - rmacs=\EG, rmkx=\E>, rmso=\E3, - rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, - smkx=\E=, smso=\E4, tbc=\Eg, -# The older Visuals didn't come with function keys. This entry uses -# and so that the keypad keys can be used as function keys. -# If your version of vi doesn't support function keys you may want -# to use vi200-f. -vi200-f|visual 200 no function keys, - is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, - kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, - kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, - use=vi200, -vi200-rv|visual 200 reverse video, - cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, - -# the function keys are programmable but we don't reprogram them to their -# default values with because programming them is very verbose. maybe -# an initialization file should be made for the 300 and they could be stuck -# in it. -# (vi300: added / based on init string -- esr) -vi300|visual 300 ansi x3.64, - am, bw, mir, xenl, - cols#80, lines#24, - bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, - dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, - il1=\E[L, ind=^J, - is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, - kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, - kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, - rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, - smso=\E[1m, smul=\E[4m, -# some of the vi300s have older firmware that has the command -# sequence for setting editing extent reversed. -vi300-old|visual 300 with old firmware (set edit extent reversed), - is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, - use=vi300, - -# Visual 500 prototype entry from University of Wisconsin. -# The best place to look for the escape sequences is page A1-1 of the -# Visual 500 manual. The initialization sequence given here may be -# overkill, but it does leave out some of the initializations which can -# be done with the menus in set-up mode. -# The :xp: line below is so that emacs can understand the padding requirements -# of this slow terminal. :xp: is 10 time the padding factor. -# (vi500: removed unknown :xp#4: termcap; -# also added empty to suppress tic warning -- esr) -vi500|visual 500, - am, mir, msgr, - cols#80, it#8, lines#33, - acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, - csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, - cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, - dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, - el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, - ind=^J, - is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, - kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, - khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, - rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, - -# The visual 550 is a visual 300 with tektronix graphics, -# and with 33 lines. clear screen is modified here to -# also clear the graphics. -vi550|visual 550 ansi x3.64, - lines#33, - clear=\030\E[H\E[2J, use=vi300, - -vi603|visual603|visual 603, - hs, mir, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, - csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, - ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, - rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, - sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, - use=vt100, + cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, + cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, + ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, + home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n, + rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, + smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12 + l\E[1Q, + smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, +pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, + cols#132, + cup=\E[%i%p1%d;%p2%dH, use=pt100, +pt250|Prime PT250, + rmso@, smso@, use=pt100, +pt250w|Prime PT250 in 132-column mode, + rmso@, smso@, use=pt100w, -#### Wyse (wy) +#### Qume (qvt) # -# Wyse Technology -# 3471 North First Street -# San Jose, CA 95134 -# Vox: (408)-473-1200 -# Fax: (408) 473-1222 -# Web: http://www.wyse.com +# Qume, Inc. +# 3475-A North 1st Street +# San Jose CA 95134 +# Vox: (800)-457-4447 +# Fax: (408)-473-1510 +# Net: josed@techsupp.wyse.com (Jose D'Oliveira) # -# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at -# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the -# obvious address, . They keep terminfo entries at -# . +# Qume was bought by Wyse, but still (as of early 1995) has its own support +# group and production division. # -# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. -# They now own the Qume and Amdek brands, too. So these are the people to -# talk with about all Link, Qume, and Amdek terminals. +# Discontinued Qume models: # -# These entries include a few small fixes. -# I canceled the bel capacities in the vb entries. -# I made two trivial syntax fixes in the wyse30 entry. -# I made some entries relative to adm+sgr. +# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ +# built to replace them, and a qvt119+ which was a 101+ with available wide +# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations +# and an ANSI-compatible qvt203 that replaced it. Qume started producing +# ANSI-compatible terminals with the qvt323 and qvt61. +# +# Current Qume models (as of February 1995): # +# All current Qume terminals have ANSI-compatible operation modes. +# Qume is still producing the qvt62, which features emulations for other +# popular lines such as ADDS, and dual-host capabilities. The qvt82 is +# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal +# with many emulations including Wyse370, Wyse 325, etc. Their newest +# model is the qvt520, which is vt420-compatible. # -# Note: The wyse75, wyse85, and wyse99 have been discontinued. +# There are some ancient printing Qume terminals under `Daisy Wheel Printers' +# +# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its +# setup mode. Shift-s should be a configuration save to NVRAM. -# Although the Wyse 30 can support more than one attribute -# it requires magic cookies to do so. Many applications do not -# function well with magic cookies. The following terminfo uses -# the protect mode to support one attribute (dim) without cookies. -# If more than one attribute is needed then the wy30-mc terminfo -# should be used. +qvt101|qvt108|qume qvt 101 and QVT 108, + xmc#1, use=qvt101+, + +# This used to have but no or . The BSD termcap +# file had . I've done the safe thing and yanked +# both. The is from BSD, which also claimed bold=\E( and dim=\E). +# What seems to be going on here is that this entry was designed so that +# the normal highlight is bold and standout is dim plus something else +# (reverse-video maybe? But then, are there two sequences?) # -wy30|wyse30|Wyse 30, - am, bw, hs, mc5i, mir, msgr, xon, - cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, - acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, - civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, - cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, - cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, - dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, - fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, - ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, - kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, - kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, +# Added kdch1, kil1, kdl1 based on screenshot -TD: +# http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg +qvt101+|qvt101p|qume qvt 101 PLUS product, + am, bw, hs, ul, + cols#80, lines#24, xmc#0, + bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, + flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1, + ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, + kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, + kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, + rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, +qvt102|qume qvt 102, + cnorm=\E., use=qvt101, +# (qvt103: added / based on init string -- esr) +qvt103|qume qvt 103, + am, xenl, xon, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, + rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 + %;m$<2>, + sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, +qvt103-w|qume qvt103 132 cols, + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, +qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, + am, hs, mir, msgr, + cols#80, lines#24, xmc#0, + bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H, + cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, + el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I, + hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX, + kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, - kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, - mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, - rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, - sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, - sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, - smso=\E`7\E), tbc=\E0, tsl=\EF, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, + tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, +qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, + lines#25, use=qvt119+, +qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, + cols#132, + is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, +qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, + lines#25, use=qvt119+, +qvt203|qvt203+|qume qvt 203 Plus, + dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, + ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, + kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, + kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, +qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, # -# This terminal description uses the non-hidden attribute mode -# (with magic cookie). +# Since a command is present for enabling 25 data lines, +# a specific terminfo entry may be generated for the 203. +# If one is desired for the QVT 119 PLUS then 25 lines must +# be selected in the status line (setup line 9). # -# (wy30-mc: added to suppress tic warning --esr) -wy30-mc|wyse30-mc|wyse 30 with magic cookies, - msgr@, - ma@, xmc#1, - blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, - rmcup=\EG0, rmso=\EG0, - sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, - sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, - smso=\EG4, use=wy30, use=adm+sgr, -# The mandatory pause used by does not work with -# older versions of terminfo. If you see this effect then -# unset xon and delete the / from the delay. -# i.e. change $<100/> to $<100> -wy30-vb|wyse30-vb|wyse 30 visible bell, - bel@, use=wy30, +qvt203-25|QVT 203 PLUS with 25 by 80 column mode, + cols#80, lines#25, + is2=\E[=40h\E[?3l, use=qvt203, +qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, + cols#132, lines#25, + rs2=\E[?3h\E[=40h, use=qvt203, + +#### Televideo (tvi) # -# The Wyse 50 can support one attribute (e.g. Dim, Inverse, -# Normal) without magic cookies by using the protect mode. -# The following description uses this feature, but when more -# than one attribute is put on the screen at once, all attributes -# will be changed to be the same as the last attribute given. -# The Wyse 50 can support more attributes when used with magic -# cookies. The wy50-mc terminal description uses magic cookies -# to correctly handle multiple attributes on a screen. +# TeleVideo +# 550 East Brokaw Road +# PO Box 49048 95161 +# San Jose CA 95112 +# Vox: (408)-954-8333 +# Fax: (408)-954-0623 # -wy50|wyse50|Wyse 50, - am, bw, hs, mc5i, mir, msgr, xon, - cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, - acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, - civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, - cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, - cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, - ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, - home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, - is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, - kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, - kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, - kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, - kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, - kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, - ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, - pfx=\Ez%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), - ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, - sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, - sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, - smso=\E`6\E), tbc=\E0, tsl=\EF, # -# This terminal description uses the non-hidden attribute mode -# (with magic cookie). +# These require incredible amounts of padding. # -# The mandatory pause used by flash does not work with some -# older versions of terminfo. If you see this effect then -# unset and delete the / from the delay. -# i.e. change $<100/> to $<100> -# (wy50-mc: added to suppress tic warning --esr) -wy50-mc|wyse50-mc|wyse 50 with magic cookies, - msgr@, - ma@, xmc#1, - blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, - rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, - sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, - sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, - smso=\EGt, use=wy50, use=adm+sgr, -wy50-vb|wyse50-vb|wyse 50 visible bell, - bel@, use=wy50, -wy50-w|wyse50-w|wyse 50 132-column, - cols#132, lw#7, nlab#16, wsl#97, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, - use=wy50, -wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, - bel@, use=wy50-w, +# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer +# Televideo terminals are ANSI and PC-ANSI compatible. +tvi803|televideo 803, + clear=\E*$<10>, use=tvi950, + +# Vanilla tvi910 -- W. Gish 10/29/86 +# Switch settings are: # -# The Wyse 350 is a Wyse 50 with color. -# Unfortunately this means that it has magic cookies. -# The color attributes are designed to overlap the reverse, dim and -# underline attributes. This is nice for monochrome applications -# because you can make underline stuff green (or any other color) -# but for true color applications it's not so hot because you cannot -# mix color with reverse, dim or underline. -# To further complicate things one of the attributes must be -# black (either the foreground or the background). In reverse video -# the background changes color with black letters. In normal video -# the foreground changes colors on a black background. -# This terminfo uses some of the more advanced features of curses -# to display both color and blink. In the final analysis I am not -# sure that the wy350 runs better with this terminfo than it does -# with the wy50 terminfo (with user adjusted colors). +# S1 1 2 3 4 +# D D D D 9600 +# D D D U 50 +# D D U D 75 +# D D U U 110 +# D U D D 135 +# D U D U 150 +# D U U D 300 +# D U U U 600 +# U D D D 1200 +# U D D U 1800 +# U D U D 2400 +# U D U U 3600 +# U U D D 4800 +# U U D U 7200 +# U U U D 9600 +# U U U U 19200 # -# The mandatory pause used by flash does not work with -# older versions of terminfo. If you see this effect then -# unset xon and delete the / from the delay. -# i.e. change $<100/> to $<100> +# S1 5 6 7 8 +# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) +# U D X U 7N2 +# U U D D 7O1 +# U U D U 7O2 +# U U U D 7E1 +# U U U U 7E2 +# D D X D 8N1 +# D D X U 8N2 +# D U D D 8O1 +# D U U U 8E2 # -# Bug: The capability resets attributes. -wy350|wyse350|Wyse 350, - am, bw, hs, mc5i, mir, xon, - colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, - wsl#45, xmc#1, - acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, - cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, - cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, - dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, - flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, - il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, - is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, - ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, - kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, - kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, - kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, - kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, - ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, - pfx=\Ez%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, - rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, - setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, - sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, - sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, - smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, -wy350-vb|wyse350-vb|wyse 350 visible bell, - bel@, use=wy350, -wy350-w|wyse350-w|wyse 350 132-column, - cols#132, lw#7, nlab#16, wsl#97, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, - use=wy350, -wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, - bel@, use=wy350-w, +# S1 9 Autowrap +# U on +# D off # -# This terminfo description is untested. -# The wyse100 emulates an adm31, so the adm31 entry should work. +# S1 10 CR/LF +# U do CR/LF when CR received +# D do CR when CR received # -wy100|wyse 100, - hs, mir, - cols#80, lines#24, xmc#1, - bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, - invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, - kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, - kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, - rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, +# S2 1 Mode +# U block +# D conversational # -# The Wyse 120/150 has most of the features of the Wyse 60. -# This terminal does not need padding up to 9600 baud! -# should be set but the clear screen fails when in -# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear -# then set . +# S2 2 Duplex +# U half +# D full # -wy120|wyse120|wy150|wyse150|Wyse 120/150, - am, bw, hs, km, mc5i, mir, msgr, xon, - cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, - acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, - bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, - cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, - dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, - flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, - hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, - is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, - is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, - kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, - kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, - kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, - mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, - pfloc=\EZ2%p1%{63}%+%c%p2%s\177, - pfx=\EZ1%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, - rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, - rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, - rs3=\EwG\Ee($<100>, - sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, - sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, - smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, - tbc=\E0, tsl=\EF, use=adm+sgr, +# S2 3 Hertz +# U 50 +# D 60 # -wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, - cols#132, lw#7, nlab#16, wsl#97, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, - rs2=\E`;$<70>, use=wy120, +# S2 4 Edit mode +# U local +# D duplex # -wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy120, +# S2 5 Cursor type +# U underline +# D block # -wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, +# S2 6 Cursor down key +# U send ^J +# D send ^V # -wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, - bel@, use=wy120, +# S2 7 Screen colour +# U green on black +# D black on green # -wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, - bel@, use=wy120-w, +# S2 8 DSR status (pin 6) +# U disconnected +# D connected # -# The Wyse 60 is like the Wyse 50 but with more padding. -# The reset strings are slow and the pad times very depending -# on other parameters such as font loading. I have tried -# to follow the following outline: +# S2 9 DCD status (pin 8) +# U disconnected +# D duplex # -# -> set personality -# -> set number of columns -# -> set number of lines -# -> select the proper font -# -> do the initialization -# -> set up display memory (2 pages) +# S2 10 DTR status (pin 20) +# U disconnected +# D duplex +# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added , , , +# , , , , from SCO entry -- esr) +tvi910|televideo model 910, + OTbs, am, msgr, + cols#80, it#8, lines#24, xmc#1, + bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, + home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I, + if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + vpa=\E[%p1%{32}%+%c, use=adm+sgr, +# From: Alan R. Rogers +# as subsequently hacked over by someone at SCO +# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) # -# The Wyse 60's that have vt100 emulation are slower than the -# older Wyse 60's. This change happened mid-1987. -# The capabilities effected are +# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): # -# The meta key is only half right. This terminal will return the -# high order bit set when you hit CTRL-function_key +# S1 1 2 3 4: +# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 +# D U D D 135 D U D U 150 D U U D 300 D U U U 600 +# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 +# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 # -# It may be useful to assign two function keys with the -# values \E=(\s look at old data in page 1 -# \E=W, look at bottom of page 1 -# where \s is a space ( ). +# S1 5 6 7 8: +# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 +# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 +# D U D D 8O1 D U U U 8E2 # -# Note: -# The Wyse 60 runs faster when the XON/XOFF -# handshake is turned off. +# S1 9 Autowrap (U = on, D = off) +# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) +# S2 1 Mode (U = block, D = conversational) +# S2 2 Duplex (U = half, D = full) +# S2 3 Hertz (U = 50, D = 60) +# S2 4 Edit mode (U = local, D = duplex) +# S2 5 Cursor type (U = underline, D = block) +# S2 6 Cursor down key (U = send ^J, D = send ^V) +# S2 7 Screen colour (U = green on black, D = black on green) +# S2 8 DSR status (pin 6) (U = disconnected, D = connected) +# S2 9 DCD status (pin 8) (U = disconnected, D = connected) +# S2 10 DTR status (pin 20) (U = disconnected, D = connected) # -# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid -# a bug reported by Robert Dunn, -- esr) -wy60|wyse60|Wyse 60, - am, bw, hs, km, mc5i, mir, msgr, - cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, - acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, - bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, - cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, - ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, - home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, - ip=$<3>, is1=\EcB0\EcC1, - is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, - is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, - kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, - kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, - kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, - mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, - pfloc=\EZ2%p1%{63}%+%c%p2%s\177, - pfx=\EZ1%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, - rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, - rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, - rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, - sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, - sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, - smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, - tbc=\E0, tsl=\EF, use=adm+sgr, +tvi910+|televideo 910+, + dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, + kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, + kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, + ll=\E=7\s, use=tvi910, + +# (tvi912: removed obsolete ":ma=^K^P^L :", added and +# from BRL entry -- esr) +tvi912|tvi914|tvi920|old televideo 912/914/920, + OTbs, OTpt, am, msgr, + cols#80, it#8, lines#24, xmc#1, + bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, + ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, + il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, + kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, + kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, + kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, + tbc=\E3, +# We got some new tvi912c terminals that act really weird on the regular +# termcap, so one of our gurus worked this up. Seems that cursor +# addressing is broken. +tvi912cc|tvi912 at cowell college, + cup@, use=tvi912c, + +# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C +# From: Benjamin C. W. Sittler # -wy60-w|wyse60-w|wyse 60 132-column, - cols#132, lw#7, nlab#16, wsl#97, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, - rs2=\EeF$<150>\E`;$<150>, use=wy60, +# Someone has put a scanned copy of the manual online at: +# http://vt100.net/televideo/912b-om/ # -wy60-25|wyse60-25|wyse 60 80-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<200>, use=wy60, -wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, +# These terminals were produced ca. 1979, and had a 12" monochrome +# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit +# ASCII, and were generally similar to adm3a but with attributes +# (including some with magic cookies), fancy half-duplex mode, and +# different bugs. # -wy60-42|wyse60-42|wyse 60 80-column 42-lines, - lines#42, - clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, - dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, - ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, - ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, -wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, - cols#132, lw#7, nlab#16, wsl#97, - clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, - dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, - nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, +# Some operations require truly incredible amounts of padding. The +# insert_line () and delete_line () operations in particular +# are so slow as to be nearly unusable. # -wy60-43|wyse60-43|wyse 60 80-column 43-lines, - lh@, lines#43, lw@, nlab@, - pln@, rs3=\Ee+$<150>, use=wy60-42, -wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, - lh@, lines#43, lw@, nlab@, - pln@, rs3=\Ee+$<150>, use=wy60-42-w, +# There may or may not have been a separate, earlier series of 912/920 +# terminals (without the "B" and "C" suffix); I have never seen one, +# and the manual only describes the "B" and "C" series. The 912 and 920 +# are quite distinct from the 914 and 924, which were much nicer non- +# magic-cookie terminals similar to the 950. # -wy60-vb|wyse60-vb|Wyse 60 visible bell, - bel@, use=wy60, -wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, - bel@, use=wy60-w, - -# The Wyse-99GT looks at lot like the Wyse 60 except that it -# does not have the 42/43 line mode. In the Wyse-60 the "lines" -# setup parameter controls the number of lines on the screen. -# For the Wyse 99GT the "lines" setup parameter controls the -# number of lines in a page. The screen can display 25 lines max. -# The Wyse-99GT also has personalities for the VT220 and -# Tektronix 4014. But this has no bearing on the native mode. +# This is a new description for the following TeleVideo terminals, +# distinguished chiefly by their keyboards: # -# (msgr) should be set but the clear screen fails when in -# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear -# then set msgr, else use msgr@. +# TVI-912B - very odd layout, no function keys (84 keys) +# TVI-920B - typewriter layout, no function keys (103 keys) +# TVI-912C - very odd layout, function keys F1-F11 (82 keys) +# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) # -# u0 -> enter Tektronix mode -# u1 -> exit Tektronix mode +# To choose a setting for the TERM variable, start with the model: # -wy99gt|wyse99gt|Wyse 99gt, - msgr@, - clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, - el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, - il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, - ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, - u0=\E~>\E8, u1=\E[42h, use=wy60, +# Model || base name +# ----------||----------- +# TVI-912B || tvi912b +# TVI-912C || tvi912c +# TVI-920B || tvi920b +# TVI-920C || tvi920c # -wy99gt-w|wyse99gt-w|wyse 99gt 132-column, - cols#132, lw#7, nlab#16, wsl#97, - clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, - dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, - use=wy99gt, +# Then add a suffix from the following table describing installed options +# and how you'd like to use the terminal: # -wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, +# Use Video | Second | Visual | Magic | Page || feature +# Attributes | Page | Bell | Cookies | Print || suffix +# ------------|--------|--------|---------|-------||--------- +# No | No | N/A | N/A | No || -unk +# No | No | N/A | N/A | Yes || -p +# No | Yes | No | N/A | No || -2p-unk +# No | Yes | No | N/A | Yes || -2p-p +# No | Yes | Yes | N/A | No || -vb-unk +# No | Yes | Yes | N/A | Yes || -vb-p +# Yes | No | N/A | No | N/A || +# Yes | No | N/A | Yes | N/A || -mc +# Yes | Yes | No | No | N/A || -2p +# Yes | Yes | No | Yes | N/A || -2p-mc +# Yes | Yes | Yes | No | N/A || -vb +# Yes | Yes | Yes | Yes | N/A || -vb-mc # -wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs2=\E`;$<150>, use=wy99gt-w, +# So e.g. a model 920 C with second page memory option, visual bell +# and no magic cookies would be tvi920c-vb; a model 912 B without the +# second page memory option and using magic cookies would be +# tvi912b-mc # -wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, - bel@, use=wy99gt, +# PADDING # -wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, - bel@, use=wy99gt-w, - -# Can't set tabs! Other bugs (ANSI mode only): -# - can't redefine function keys (anyway, key redefinition in ANSI mode -# is too much complex to be described); -# - meta key can't be described (the terminal forgets it when reset); -# The xon-xoff handshaking can't be disabled while in ansi personality, so -# emacs can't work at speed greater than 9600 baud. No padding is needed at -# this speed. -# dch1 has been commented out because it causes annoying glittering when -# vi deletes one character at the beginning of a line with tabs in it. -# dch makes sysgen(1M) have a horrible behaviour when deleting -# a screen and makes screen(1) behave badly, so it is disabled too. The nice -# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are -# not, so smir and rmir are commented out as well. -# From: Francesco Potorti` , 24 Aug 1998 -wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), - am, km, mc5i, mir, msgr, xenl, - cols#80, it#8, lines#25, vt#3, - acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, - cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, - cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, - cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, - ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, - enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, - hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, - il1=\E[L, ind=\n$<1>, invis=\E[8m, - is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, - kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, - kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, - kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, - kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, - kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, - mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, - rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, - rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, - rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, - sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, - sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, - -# This is the american terminal. Here tabs work fine. -# From: Francesco Potorti` , 24 Aug 1998 -wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), - hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, - -# This terminal (firmware version 02) has a lot of bugs: -# - can't set tabs; -# - other bugs in ANSI modes (see above). -# This description disables handshaking when using cup. This is because -# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal -# cannot be used at speeds greater than 9600 baud, because at greater -# speeds handshaking is needed even for character sending. If you use -# DTR handshaking, you can use even greater speeds. -# From: Francesco Potorti` , 24 Aug 1998 -wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), - am, bw, hs, km, mc5i, mir, msgr, xon, - cols#80, it#8, lines#25, wsl#46, - acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, - blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, - cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, - ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, - flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, - ind=^J, invis=\EG3, - is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, - ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, - kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, - kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, - kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, - kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, - nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., - rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, - rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, - sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, - sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, - smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, - -# This is the american terminal. Here tabs work. -# From: Francesco Potorti` , 24 Aug 1998 -wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), - hts=\E1, tbc=\E0, use=wy99f, - +# At 9600 baud, the terminal is prone to overflow its input buffer +# during complex operations (insert/delete +# character/line/screen/page), and it does not signal this over the +# RS232 cable. The typical symptom of an overrun is that the terminal +# starts beeping, and output becomes garbled. # -# The Wyse 160 is combination of the WY-60 and the WY-99gt. -# The reset strings are slow and the pad times very depending -# on other parameters such as font loading. I have tried -# to follow the following outline: +# The padding delays in this terminfo were derived using tack(1) +# running on a Linux box connected to a TVI-920C with a later-model +# (A49C1-style) ROM running at 9600 baud, so your mileage may +# vary. The numbers below seem to give the terminal enough time so +# that it doesn't overflow its input buffer and start losing +# characters. # -# -> set personality -# -> set number of columns -# -> set number of lines -# -> select the proper font -# -> do the initialization -# -> set up display memory (2 pages) +# KEYS # -# The display memory may be used for either text or graphics. -# When "Display Memory = Shared" the terminal will have more pages -# but garbage may be left on the screen when you switch from -# graphics to text. If "Display Memory = Unshared" then the -# text area will be only one page long. +# If you want to use the FUNCT key on a tvi912[bc], use the +# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from +# the following table (these also work on the 920 series): # -# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid -# a bug reported by Robert Dunn, -- esr) -wy160|wyse160|Wyse 160, - am, bw, hs, km, mc5i, mir, msgr, - cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, - acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, - bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, - cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, - dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, - el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, - hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, - is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, - is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, - kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, - kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, - kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, - mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, - pfloc=\EZ2%p1%{63}%+%c%p2%s\177, - pfx=\EZ1%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, - rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, - rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, - rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, - sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, - sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, - smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, - tbc=\E0, tsl=\EF, use=adm+sgr, +# Unshifted Function Keys: # -wy160-w|wyse160-w|wyse 160 132-column, - cols#132, lw#7, nlab#16, wsl#90, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, - rs2=\EeF$<150>\E`;$<150>, use=wy160, +# Key | capname|| Equivalent +# -----|--------||------------ +# F1 | || FUNCT + @ +# F2 | || FUNCT + A +# F3 | || FUNCT + B +# F4 | || FUNCT + C +# F5 | || FUNCT + D +# F6 | || FUNCT + E +# F7 | || FUNCT + F +# F8 | || FUNCT + G +# F9 | || FUNCT + H +# F10 | || FUNCT + I +# F11 | || FUNCT + J # -wy160-25|wyse160-25|wyse 160 80-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<200>, use=wy160, -wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, +# Shifted Function Keys: # -wy160-42|wyse160-42|wyse 160 80-column 42-lines, - lines#42, - clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, - ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, - rs3=\Ee*$<150>, use=wy160, -wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, - cols#132, lw#7, nlab#16, wsl#90, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, - rs2=\EeF$<150>\E`;$<150>, use=wy160-42, +# SHIFT + Key | capname|| Equivalent +# -------------|--------||------------ +# SHIFT + F1 | || FUNCT + ` +# SHIFT + F2 | || FUNCT + a +# SHIFT + F3 | || FUNCT + b +# SHIFT + F4 | || FUNCT + c +# SHIFT + F5 | || FUNCT + d +# SHIFT + F6 | || FUNCT + e +# SHIFT + F7 | || FUNCT + f +# SHIFT + F8 | || FUNCT + g +# SHIFT + F9 | || FUNCT + h +# SHIFT + F10 | || FUNCT + i +# SHIFT + F11 | || FUNCT + j # -wy160-43|wyse160-43|wyse 160 80-column 43-lines, - lh@, lines#43, lw@, nlab@, - pln@, rs3=\Ee+$<150>, use=wy160-42, -wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, - lh@, lines#43, lw@, nlab@, - pln@, rs3=\Ee+$<150>, use=wy160-42-w, +# PORTS AND SWITCH SETTINGS # -wy160-vb|wyse160-vb|Wyse 160 visible bell, - bel@, use=wy160, -wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, - bel@, use=wy160-w, +# Here are the switch settings for the TVI-912B/TVI-920B and +# TVI-912C/TVI-920C: # -# The Wyse 75 is a vt100 lookalike without advanced video. +# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: +# 2: 9600 3: 4800 4: 2400 5: 1200 +# 6: 600 7: 300 8: 150 9: 75 +# 10: 110 # -# The Wyse 75 can support one attribute (e.g. Dim, Inverse, -# Underline) without magic cookies. The following description -# uses this capability, but when more than one attribute is -# put on the screen at once, all attributes will be changed -# to be the same as the last attribute given. -# The Wyse 75 can support more attributes when used with magic -# cookies. The wy75-mc terminal description uses magic cookies -# to correctly handle multiple attributes on a screen. +# S2 UART/Terminal options: +# Up Down +# 1: Not used Not allowed +# 2: Alternate character set Standard character set +# 3: Full duplex Half duplex +# 4: 50 Hz refresh 60 Hz refresh +# 5: No parity Send parity +# 6: 2 stop bits 1 stop bit +# 7: 8 data bits 7 data bits +# 8: Not used Not allowed on Rev E or lower +# 9: Even parity Odd parity +# 10: Steady cursor Blinking cursor +# (On Rev E or lower, use W25 instead of switch 10.) # -wy75|wyse75|wyse 75, - am, hs, mc5i, mir, msgr, xenl, xon, - cols#80, lines#24, ma#1, pb#1201, wsl#78, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, - cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, - dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, - dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, - ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, - enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, - ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, - ind=\n$<2>, ip=$<1>, - is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, - is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, - kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, - kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, - kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, - kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, - khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, - kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, - mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, - rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, - rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, - sc=\E7, - sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, - tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, +# S5 UART/Terminal options: +# Open Closed +# 1: P3-6 Not connected DSR received on P3-6 +# 2: P3-8 Not connected DCD received on P3-8 # -# This terminal description uses the non-hidden attribute mode -# (with magic cookie). +# 3 Open, 4 Open: P3-20 Not connected +# 3 Open, 4 Closed: DTR on when terminal is on +# 3 Closed, 4 Open: DTR is connected to RTS +# 3 Closed, 4 Closed: Not allowed # -wy75-mc|wyse75-mc|wyse 75 with magic cookies, - msgr@, - ma@, xmc#1, - blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, - rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, - sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, - sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, - use=wy75, -wy75-vb|wyse75-vb|wyse 75 with visible bell, - pb@, - bel@, use=wy75, -wy75-w|wyse75-w|wyse 75 in 132 column mode, - cols#132, wsl#130, - rs2=\E[35h\E[?3h$<80>, use=wy75, -wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, - pb@, - bel@, use=wy75-w, +# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, +# all data transmitted out of the modem port (P3) will also be +# transmitted out of the printer port (P4). # -# Wyse 85 emulating a vt220 7 bit mode. -# 24 line screen with status line. +# 6 Open, 7 Open: Not allowed +# 6 Open, 7 Closed: 20ma current loop input +# 6 Closed, 7 Open: RS232 input +# 6 Closed, 7 Closed: Not allowed # -# The vt220 mode permits more function keys but it wipes out -# the escape key. I strongly recommend that be set to -# escape (esc). -# The terminal may have to be set for 8 data bits and 2 stop -# bits for the arrow keys to work. -# The Wyse 85 runs faster with XON/XOFF enabled. Also the -# and work best when XON/XOFF is set. and -# leave trash on the screen when used without XON/XOFF. +# Jumper options: +# If the jumper is installed, the effect will occur (the next time the terminal +# is switched on). # -wy85|wyse85|wyse 85, - am, hs, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, - dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, - ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, - enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, - fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, - ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, - ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, - is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, - is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, - kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, - kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, - khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, - kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, - mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, - rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, - rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, - rs3=\E[?5l, sc=\E7, - sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, +# S4/W31: Enables automatic LF upon receipt of CR from +# remote or keyboard. +# S4/W32: Enables transmission of EOT at the end of Send. If not +# installed, a carriage return is sent. +# S4/W33: Disables automatic carriage return in column 80. +# S4/W34: Selects Page Print Mode as initial condition. If not +# installed, Extension Mode is selected. # -# Wyse 85 with visual bell. -wy85-vb|wyse85-vb|wyse 85 with visible bell, - bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, -# -# Wyse 85 in 132-column mode. -wy85-w|wyse85-w|wyse 85 in 132-column mode, - cols#132, wsl#132, - rs2=\E[35h\E[?3h$<70>, use=wy85, -# -# Wyse 85 in 132-column mode with visual bell. -wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, - bel@, use=wy85-w, - -# From: Kevin Turner , 12 Jul 1998 -# This copes with an apparent firmware bug in the wy85. He writes: -# "What I did was change leave the terminal cursor keys set to Normal -# (instead of application), and change \E[ to \233 for all the keys in -# terminfo. At one point, I found some reference indicating that this -# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just -# me), but I can't find that and the server under my bookmark to "Wyse -# Technical" isn't responding. So there's the question of wether the wy85 -# terminfo should reflect the manufactuer's intended behaviour of the terminal -# or the actual." -wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, - am, hs, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, - dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, - ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, - enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, - fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, - ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, - ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, - is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, - is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, - kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, - kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, - kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, - kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, - kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, - kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, - kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, - khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, - kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, - mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, - rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, - rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, - rs3=\E[?5l, sc=\E7, - sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[40h\E7\E[25;%i%p1%dH, -# -# Wyse 185 emulating a vt320 7 bit mode. -# -# This terminal always displays 25 lines. These lines may be used -# as 24 data lines and a terminal status line (top or bottom) or -# 25 data lines. The 48 and 50 line modes change the page size -# and not the number of lines on the screen. -# -# The Compose Character key can be used as a meta key if changed -# by set-up. -# -wy185|wyse185|wyse 185, - am, hs, km, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, - dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, - dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, - el=\E[K, el1=\E[1K, enacs=\E)0, - flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, - home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, - ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, - ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, - is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, - is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, - kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, - kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, - knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, - lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, - ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, - rmkx=\E>, rmso=\E[27m, rmul=\E[24m, - rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, - rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, - sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, - smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, - use=vt220+keypad, -# -# Wyse 185 with 24 data lines and top status (terminal status) -wy185-24|wyse185-24|wyse 185 with 24 data lines, - hs@, - dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, - use=wy185, -# -# Wyse 185 with visual bell. -wy185-vb|wyse185-vb|wyse 185+flash, - bel@, use=wy185, -# -# Wyse 185 in 132-column mode. -wy185-w|wyse185-w|wyse 185 in 132-column mode, - cols#132, wsl#132, - dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, - ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, -# -# Wyse 185 in 132-column mode with visual bell. -wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, - bel@, use=wy185-w, - -# wy325 terminfo entries -# Done by Joe H. Davis 3-9-92 - -# lines 25 columns 80 -# -wy325|wyse325|Wyse epc, - am, bw, hs, mc5i, mir, - cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, - acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, - bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, - cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, - dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, - flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, - il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, - is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, - is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, - kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, - kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, - kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, - kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, - kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, - kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, - mc0=\EP, mc4=^T, mc5=\Ed#, - pfloc=\EZ2%p1%{63}%+%c%p2%s\177, - pfx=\EZ1%p1%{63}%+%c%p2%s\177, - pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, - rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, - rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, - rs3=\EwG\Ee($<100>, - sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, - sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, - smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, - tsl=\EF, use=adm+sgr, - -# -# lines 24 columns 80 vb -# -wy325-vb|wyse325-vb|wyse-325 with visual bell, - bel@, use=wy325, - -# -# lines 24 columns 132 -# -wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, - cols#132, lw#7, nlab#16, wsl#97, - cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, - rs2=\E`;$<70>, use=wy325, -# -# lines 25 columns 80 -# -wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy325, -# -# lines 25 columns 132 +# NON-STANDARD CAPABILITIES # -wy325-25w|wyse325-25w|wy325 132 columns, - lh@, lines#25, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# Sending or returns a cursor position report in the format +# YX\r, where Y and X are as in . This format is described in +# and , but it's not clear how one should write an +# appropriate scanf string, since we need to subtract %' ' from the +# character after reading it. The capability is used by tack(1) +# to synchronize during padding tests, and seems to work for that +# purpose. # -# lines 25 columns 132 vb +# This description also includes the obsolete termcap capabilities +# has_hardware_tabs () and backspaces_with_bs (). # -wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, - bel@, use=wy325-w, - +# FEATURES NOT YET DESCRIBED IN THIS TERMINFO # -# lines 42 columns 80 +# The FUNCT modifier actually works with every normal key by sending +# ^AX\r, where X is the sequence normally sent by that key. This is a +# sort of meta key not currently describable in terminfo. # -wy325-42|wyse325-42|wyse-325 42 lines, - lh@, lines#42, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy325, +# There are quite a few other keys (especially on the 920 models,) but +# they are for the most part only useful in block mode. # -# lines 42 columns 132 +# These terminals have lots of forms manipulation features, mainly +# useful in block mode, including "clear X to nulls" (vs. "clear X to +# spaces"; nulls are sentinels for "send X" operations); "send X" +# operations for uploading all or part of the screen; and block-mode +# editing keys (they don't send escape sequences, but manipulate video +# memory directly). Block mode is used for local editing, and protect +# mode (in conjunction with the "write protect" attribute, +# a.k.a. half-intensity outside of protect mode) is used to control +# which parts of the screen are edited/sent/printed (by ). # -wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, - lh@, lines#42, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# There are at least two major families of ROM, "early" and +# A49B1/A49C1; the major difference seems to be that the latter ROMs +# support a few extra escape sequences for manipulating the off-screen +# memory page, and for sending whole pages back to the host (mainly +# useful in block mode.) The descriptions in this file don't use any +# of those sequences: set cursor position including page (\E-PYX, +# where P is \s for page 0 and ! for page 1 [actually only the LSB of +# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are +# as in ); read cursor position (\E/), which is analogous to +# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX +# are as in , and some "send page" features mainly useful for +# forms manipulation. # -# lines 42 columns 132 vb +# The keyboard enable (\E") and disable (\E#) sequences are unused, +# except that a terminal reset () enables the keyboard. # -wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, - bel@, use=wy325-w, +# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) +# enabled in , but auto-flip is very jarring so we don't use it. # -# lines 43 columns 80 +# BUGS # -wy325-43|wyse325-43|wyse-325 43 lines, - lh@, lines#43, lw@, nlab@, - pln@, use=wy325, +# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed +# sequences (I infer that in some TeleVideo terminal they may invert +# and uninvert the display) so the sequence given here is a +# cheesy page-flip instead. # -# lines 43 columns 132 +# The back_tab () sequence (\EI) doesn't work according to +# tack(1), so it is not included in the descriptions below. # -wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, - lh@, lines#43, lw@, nlab@, - pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# It's not clear whether auto_left_margin () flag should be set +# for these terminals; tack says yes, so it is set here, but this +# differs from other descriptions I've seen. # -# lines 43 columns 132 vb +# Extension print mode () echoes all characters to the printer +# port [in addition to displaying them] except for the page print mode +# sequence (); this is a slight violation of the terminfo +# definition for but I don't expect it to cause problems. We +# reset to page print mode in since it may have been enabled +# accidentally. # -wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, - bel@, use=wy325-w, +# The descriptions with plus signs (+) are building blocks. -# Wyse 370 -- 24 line screen with status line. -# -# The terminal may have to be set for 8 data bits and 2 stop -# bits for the arrow keys to work. -# -# If you change keyboards the terminal will send different -# escape sequences. -# The following definition is for the basic terminal without -# function keys. +tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), + OTbs, OTpt, am, bw, + cols#80, it#8, lines#24, + bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, + dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, + home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, + if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, + ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n, + kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA, + mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, + u7=\E?, u8=%c%c\r, u9=\E?, + +# This isn't included in the basic capabilities because it is +# typically unusable in combination with the full range of video +# attributes, since the magic cookie attributes turn into ASCII +# control characters, and the half-intensity ("protected") attribute +# converts all affected characters to spaces. + +tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, + mc0=\EP, + +# This uses half-intensity mode () for standout (), and +# exposes no other attributes (half-intensity is the only attribute +# that does not generate a magic cookie.) + +tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, + msgr, + dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, + smso=\E), + +# Full magic-cookie attribute support, with half-intensity reverse +# video for standout. Note that we add a space in the sequence +# to give a consistent magic-cookie count. Also note that uses +# backspacing (in the TVI-supported order) to apply all requested +# attributes with only a single magic cookie. + +tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, + xmc#1, + blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, + rmul=\Em, + sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%? + %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, + sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, + +# This uses the second page memory option to save & restore screen +# contents. If your terminal is missing the option, this description +# should still work, but that has not been tested. + +tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, + flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, + smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, + +# This simulates flashing by briefly toggling to the other page +# (kludge!) + +tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, + bel=\EK$<100>\EK, use=tvi912b+2p, + +# Function keys ( .. are shifted .. ) + +tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, + kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, + kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, + kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, + +# Combinations of the basic building blocks + +tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), + use=tvi912b+2p, use=tvi912b-unk, + +tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), + use=tvi912b+vb, use=tvi912b-unk, + +tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), + use=tvi912b+printer, use=tvi912b-unk, + +tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), + use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, + +tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), + use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, + +tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), + use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, + +tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), + use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, + +tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), + use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, + +tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), + use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, + +tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), + use=tvi912b+dim, use=tvi912b-unk, + +tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), + use=tvi912b+mc, use=tvi912b-unk, + +tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), + use=tvi920b+fn, use=tvi912b-unk, + +tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), + use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, + +tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), + use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, + +tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), + use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, + +tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), + use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, + use=tvi912b-unk, + +tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), + use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, + use=tvi912b-unk, + +tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), + use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, + use=tvi912b-unk, + +tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), + use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, + use=tvi912b-unk, + +tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), + use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, + use=tvi912b-unk, + +tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), + use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, + use=tvi912b-unk, + +tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), + use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, + +tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), + use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, + +# Televideo 921 and variants +# From: Tim Theisen 22 Sept 1995 +# (tvi921: removed :ko=bt: before translation, I see no backtab cap; +# also added empty to suppress tic warning -- esr) +tvi921|televideo model 921 with sysline same as page & real vi function, + OTbs, OTpt, am, hs, xenl, xhp, + cols#80, lines#24, xmc#0, + acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, + el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, + if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@, + is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, + kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, + ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%, + rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, +# without the beeper +# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; +# also added empty to suppress tic warning -- esr) +tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, + am, hs, xenl, xhp, + cols#80, lines#24, xmc#0, + acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, + el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, + ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, + invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, + kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, + kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, + nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, +# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) +tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, + dl1=\ER$<2*/>, il1=\EE$<2*/>, + is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, + kil1=\EE$<2*/>, use=tvi92B, + +# (tvi924: This used to have , . I put the new strings +# in from a BSD termcap file because it looks like they do something the +# old ones skip -- esr) +tvi924|televideo tvi924, + am, bw, hs, in, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, xmc#0, + bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, + cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, + cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, + dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, + flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, + ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, + invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, + kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, + kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, + kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, + kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, + kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, + lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, + pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, + use=adm+sgr, + +# TVI925 DIP switches. In each of these, D = Down and U = Up, # -# -> enter Tektronix 4010/4014 mode -# -> exit Tektronix 4010/4014 mode -# -> enter ASCII mode (from any ANSI mode) -# -> exit ASCII mode (goto native ANSI mode) -# -> enter Tek 4207 ANSI mode (from any ANSI mode) -# -> exit Tek 4207 mode (goto native ANSI mode) +# Here are the settings for the external (baud) switches (S1): # -# Bug: The capability resets attributes. -wy370-nk|wyse 370 without function keys, - am, ccc, hs, mc5i, mir, msgr, xenl, xon, - colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, - dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, - dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, - el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, - flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, - home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, - ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, - ind=\n$<2>, - initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, - invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, - is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, - is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, - mc5=\E[5i, - oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, - op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, - rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, - rmkx=\E>, rmso=\E[27m, rmul=\E[24m, - rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, - rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, - sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, - smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, - u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, - u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, +# Position Baud +# 7 8 9 10 [Printer] +# 1 2 3 4 [Main RS232] +# ----------------------------------------------------- +# D D D D 9600 +# D D D U 50 +# D D U D 75 +# D D U U 110 +# D U D D 135 +# D U D U 150 +# D U U D 300 +# D U U U 600 +# U D D D 1200 +# U D D U 1800 +# U D U D 2400 +# U D U U 3600 +# U U D D 4800 +# U U D U 7200 +# U U U D 9600 +# U U U U 19200 # -# Function key set for the ASCII (wy-50 compatible) keyboard -# This is the default 370. # -wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, - kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, - kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, - kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, - kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, - kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, - knp=\E[U, kpp=\E[V, use=wy370-nk, -# -# Function key set for the VT-320 (and wy85) compatible keyboard +# Settings for word length and stop-bits (S1) # -wy370-105k|Wyse 370 with 105 key keyboard, - kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, - kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, - kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, - kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, - khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, - kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, - use=wy370-nk, use=vt220+keypad, +# Position Description +# 5 6 +# --------------------------- +# U - 7-bit word +# D - 8-bit word +# - U 2 stop bits +# - D 1 stop bit # -# Function key set for the PC compatible keyboard # -wy370-EPC|Wyse 370 with 102 key keyboard, - kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, - kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, - khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, +# S2 (external) settings # -# Wyse 370 with visual bell. -wy370-vb|Wyse 370 with visible bell, - bel@, use=wy370, +# Position Up Dn Description +# -------------------------------------------- +# 1 X Local edit +# X Duplex edit (transmit editing keys) +# -------------------------------------------- +# 2 X 912/920 emulation +# X 925 +# -------------------------------------------- +# 3 X +# 4 X No parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Odd parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Even parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Mark parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Space parity +# 5 X +# -------------------------------------------- +# 6 X White on black display +# X Black on white display +# -------------------------------------------- +# 7 X Half Duplex +# 8 X +# -------------------------------------------- +# 7 X Full Duplex +# 8 X +# -------------------------------------------- +# 7 X Block mode +# 8 X +# -------------------------------------------- +# 9 X 50 Hz +# X 60 Hz +# -------------------------------------------- +# 10 X CR/LF (Auto LF) +# X CR only # -# Wyse 370 in 132-column mode. -wy370-w|Wyse 370 in 132-column mode, - cols#132, wsl#132, - rs2=\E[35h\E[?3h$<70>, use=wy370, +# S3 (internal switch) settings: # -# Wyse 370 in 132-column mode with visual bell. -wy370-wvb|Wyse 370 with visible bell 132-columns, - flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, -wy370-rv|Wyse 370 reverse video, - rs3=\E[32h\E[?5h, use=wy370, +# Position Up Dn Description +# -------------------------------------------- +# 1 X Keyclick off +# X Keyclick on +# -------------------------------------------- +# 2 X English +# 3 X +# -------------------------------------------- +# 2 X German +# 3 X +# -------------------------------------------- +# 2 X French +# 3 X +# -------------------------------------------- +# 2 X Spanish +# 3 X +# -------------------------------------------- +# 4 X Blinking block cursor +# 5 X +# -------------------------------------------- +# 4 X Blinking underline cursor +# 5 X +# -------------------------------------------- +# 4 X Steady block cursor +# 5 X +# -------------------------------------------- +# 4 X Steady underline cursor +# 5 X +# -------------------------------------------- +# 6 X Screen blanking timer (ON) +# X Screen blanking timer (OFF) +# -------------------------------------------- +# 7 X Page attributes +# X Line attributes +# -------------------------------------------- +# 8 X DCD disconnected +# X DCD connected +# -------------------------------------------- +# 9 X DSR disconnected +# X DSR connected +# -------------------------------------------- +# 10 X DTR Disconnected +# X DTR connected +# -------------------------------------------- # -# Wyse 99gt Tektronix 4010/4014 emulator, +# (tvi925: BSD has . I got and from there -- esr) +tvi925|televideo 925, + OTbs, am, bw, hs, ul, + cols#80, lines#24, xmc#1, + bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, + flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1, + ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z, + kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, + ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, + kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, + kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, + tsl=\Eh\Ef, use=adm+sgr, +# TeleVideo 925 from Mitch Bradley via BRL +# to avoid "magic cookie" standout glitch: +tvi925-hi|TeleVideo Model 925 with half intensity standout mode, + xmc@, + kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925, + +# From: Todd Litwin 28 May 1993 +# Originally Tim Curry, Univ. of Central Fla., 5/21/82 +# for additional capabilities, +# The following tvi descriptions from B:pjphar and virus!mike +# is for all 950s. It sets the following attributes: +# full duplex (\EDF) write protect off (\E() +# conversation mode (\EC) graphics mode off (\E%) +# white on black (\Ed) auto page flip off (\Ew) +# turn off status line (\Eg) clear status line (\Ef\r) +# normal video (\E0) monitor mode off (\EX or \Eu) +# edit mode (\Er) load blank char to space (\Ee\040) +# line edit mode (\EO) enable buffer control (^O) +# protect mode off (\E\047) duplex edit keys (\El) +# program unshifted send key to send line all (\E016) +# program shifted send key to send line unprotected (\E004) +# set the following to nulls: +# field delimiter (\Ex0\200\200) +# line delimiter (\Ex1\200\200) +# start-protected field delimiter (\Ex2\200\200) +# end-protected field delimiter (\Ex3\200\200) +# set end of text delimiter to carriage return/null (\Ex4\r\200) # -wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, - am, os, - cols#74, lines#35, - bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, - cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, - cuu1=^K, ff=^L, - hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, - home=^]7`x @\037, - hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, - is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, +# TVI 950 Switch Setting Reference Charts # -# Wyse 160 Tektronix 4010/4014 emulator, +# TABLE 1: # -wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, - cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, - home=^]8`g @\037, use=wy99gt-tek, +# S1 1 2 3 4 5 6 7 8 9 10 +# +-----------------------+-----+-----+-----------------------+ +# | Computer Baud Rate |Data |Stop | Printer Baud Rate | +# | |Bits |Bits | | +# +------+-----------------------+-----+-----+-----------------------+ +# | Up | See | 7 | 2 | See | +# +------+-----------------------+-----+-----+-----------------------+ +# | Down | TABLE 2 | 8 | 1 | TABLE 2 | +# +------+-----------------------+-----+-----+-----------------------+ # -# Wyse 370 Tektronix 4010/4014 emulator, # -wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, - am, os, - cols#80, lines#36, - bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, - cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, - cuu1=^K, ff=^L, - hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, - home=^]8g @\037, - hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, - is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, - nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, - -# Vendor-supplied Wyse entries end here. - +# S2 1 2 3 4 5 6 7 8 9 10 +# +-----+-----+-----------------+-----+-----------+-----+-----+ +# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ # -#TITLE: TERMINFO ENTRY WY520 -#DATE: 8/5/93 -# The WY520 terminfo is based on the WY285 entry published on the WYSE -# BBS with the addition of more function keys and special keys. +# TABLE 2: # -# rs1 -> set personality -# rs2 -> set number of columns -# rs3 -> set number of lines -# is1 -> select the proper font -# is2 -> do the initialization -# is3 -> If this string is empty then rs3 gets sent. +# +-----------+-----+-----+-----+-----+-----------+ +# | Display | 1 | 2 | 3 | 4 | Baud | +# +-----------+-----+-----+-----+-----+ | +# | Printer | 7 | 8 | 9 | 10 | Rate | +# +-----------+-----+-----+-----+-----+-----------+ +# | D | D | D | D | 9600 | +# | U | D | D | D | 50 | +# | D | U | D | D | 75 | +# | U | U | D | D | 110 | +# | D | D | U | D | 135 | +# | U | D | U | D | 150 | +# | D | U | U | D | 300 | +# | U | U | U | D | 600 | +# | D | D | D | U | 1200 | +# | U | D | D | U | 1800 | +# | D | U | D | U | 2400 | +# | U | U | D | U | 3600 | +# | D | D | U | U | 4800 | +# | U | D | U | U | 7200 | +# | D | U | U | U | 9600 | +# | U | U | U | U | 19200 | +# +-----+-----+-----+-----+-----------+ # -# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard -# - The BS key is programmed to generate BS in smcup since -# is2 doesn't seem to work. -# - Remove and shift/Remove: delete a character -# - Insert : enter insert mode -# - Find : delete to end of file -# - Select : clear a line -# - F11, F12, F13: send default sequences (not ESC, BS, LF) -# - F14 : Home key -# - Bottom status line (host writable line) is used. -# - smkx,rmkx are removed because this would put the numeric -# keypad in Dec application mode which doesn't seem to work -# with SCO applications. +# TABLE 3: +# +-----+-----+-----+-----------+ +# | 3 | 4 | 5 | Parity | +# +-----+-----+-----+-----------+ +# | X | X | D | None | +# | D | D | U | Odd | +# | D | U | U | Even | +# | U | D | U | Mark | +# | U | U | U | Space | +# +-----+-----+-----+-----------+ +# X = don't care # -wy520|wyse520|wyse 520, - am, hs, km, mc5i, mir, xenl, xon, - cols#80, it#8, lines#24, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, - dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, - ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, - enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, - hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, - il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, - is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, - is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, - kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, - kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, - kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, - kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, - kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, - kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, - lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, - rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, - rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, - rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, - rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, - sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, - smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, - tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, - vpa=\E[%i%p1%dd, use=vt220+keypad, -# -# Wyse 520 with 24 data lines and status (terminal status) -wy520-24|wyse520-24|wyse 520 with 24 data lines, - hs@, - dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, - use=wy520, -# -# Wyse 520 with visual bell. -wy520-vb|wyse520-vb|wyse 520 with visible bell, - flash=\E[30h\E\,\E[30l$<100>, use=wy520, -# -# Wyse 520 in 132-column mode. -wy520-w|wyse520-w|wyse 520 in 132-column mode, - cols#132, wsl#132, - dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, - ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, -# -# Wyse 520 in 132-column mode with visual bell. -wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, - flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, -# -# -# Wyse 520 emulating a vt420 7 bit mode. -# The DEL key is programmed to generate BS in is2. -# With EPC keyboard. -# - 'End' key will clear till end of line on EPC keyboard -# - Shift/End : ignored. -# - Insert : enter insert mode. -# - Delete : delete a character (have to change interrupt character -# to CTRL-C: stty intr '^c') for it to work since the -# Delete key sends 7FH. -wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, - kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, - kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, - use=wy520, -# -# Wyse 520 with 24 data lines and status (terminal status) -# with EPC keyboard. -wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, - hs@, - dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, - use=wy520-epc, -# -# Wyse 520 with visual bell. -wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, - flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, +# CHART: +# +-----+-----+-----------------+ +# | 7 | 8 | Communication | +# +-----+-----+-----------------+ +# | D | D | Half Duplex | +# | D | U | Full Duplex | +# | U | D | Block | +# | U | U | Local | +# +-----+-----+-----------------+ # -# Wyse 520 in 132-column mode. -wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, - cols#132, wsl#132, - dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, - ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, +# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". +# I also inserted and ; the :ko: string indicated that +# should be present and all tvi native modes use the same string for this. +# Finally, note that BSD has cud1=^V. -- esr) # -# Wyse 520 in 132-column mode with visual bell. -wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, - flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, +# TVI 950 has 11 function-keys -TD +tvi950|televideo 950, + OTbs, am, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, xmc#1, + acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*, + cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, + fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n, + invis@, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 + \Ef\r, + kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r, + kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, + khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, + rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3, + tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r, + kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r, + kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, # -# Wyse 520 in 80-column, 36 lines -wy520-36|wyse520-36|wyse 520 with 36 data lines, - hs@, - lines#36, - dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, - use=wy520, +# is for 950 with two pages adds the following: +# set 48 line page (\E\\2) +# place cursor at page 0, line 24, column 1 (\E-07 ) +# set local (no send) edit keys (\Ek) # -# Wyse 520 in 80-column, 48 lines -wy520-48|wyse520-48|wyse 520 with 48 data lines, - hs@, - lines#48, - dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, - use=wy520, +# two page 950 adds the following: +# when entering ex, set 24 line page (\E\\1) +# when exiting ex, reset 48 line page (\E\\2) +# place cursor at 0,24,1 (\E-07 ) +# set duplex (send) edit keys (\El) when entering vi +# set local (no send) edit keys (\Ek) when exiting vi # -# Wyse 520 in 132-column, 36 lines -wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, - cols#132, wsl#132, - rs2=\E[?3h, - rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, - use=wy520-36, +tvi950-2p|televideo950 w/2 pages, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 + \E\\2\E-07\s\011, + rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, use=tvi950, # -# Wyse 520 in 132-column, 48 lines -wy520-48w|wyse520-48w|wyse 520 with 48 data lines, - cols#132, wsl#132, - rs2=\E[?3h, - rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, - use=wy520-48, +# is for 950 with four pages adds the following: +# set 96 line page (\E\\3) +# place cursor at page 0, line 24, column 1 (\E-07 ) # +# four page 950 adds the following: +# when entering ex, set 24 line page (\E\\1) +# when exiting ex, reset 96 line page (\E\\3) +# place cursor at 0,24,1 (\E-07 ) # -# Wyse 520 in 80-column, 36 lines with EPC keyboard -wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, - hs@, - lines#36, - dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, - use=wy520-epc, +tvi950-4p|televideo950 w/4 pages, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 + \E\\3\E-07\s\011, + rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, use=tvi950, # -# Wyse 520 in 80-column, 48 lines with EPC keyboard -wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, - hs@, - lines#48, - dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, - use=wy520-epc, +# for reverse video 950 changes the following: +# set reverse video (\Ed) # -# Wyse 520 in 132-column, 36 lines with EPC keyboard -wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, - cols#132, wsl#132, - rs2=\E[?3h, - rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, - use=wy520-36pc, +# set vb accordingly (\Ed ...delay... \Eb) # -# Wyse 520 in 132-column, 48 lines with EPC keyboard -wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, - cols#132, wsl#132, - rs2=\E[?3h, - rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, - use=wy520-48pc, - -# From: John Gilmore -# (wyse-vp: removed , there's no such -# file and we don't know what is -- esr) -wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, - OTbs, am, - cols#80, it#8, lines#24, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, - dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, - is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, - kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, - rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, - smul=^N, - -wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, - is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, - kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, - use=wy75, - -# From: Eric Freudenthal -wy100q|Wyse 100 for Quotron, - OTbs, - cols#80, lines#24, xmc#1, - cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, - is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, - kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, +tvi950-rv|televideo950 rev video, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r + \0, + use=tvi950, -#### Kermit terminal emulations -# -# Obsolete Kermit versions may be listed in the section describing obsolete -# non-ANSI terminal emulators later in the file. -# +# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv +tvi950-rv-2p|televideo950 rev video w/2 pages, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 + \E\\2\E-07\s, + rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, use=tvi950, -# KERMIT standard all versions. -# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. -# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) -# From: greg small 9-25-84 -kermit|standard kermit, - OTbs, - cols#80, lines#24, - clear=\EE, cub1=^H, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, - el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, -kermit-am|standard kermit plus auto-margin, - am, - is2=K1 Standard Kermit plus Automatic Margins\n, - use=kermit, -# IBMPC Kermit 1.2. -# Bugs: , : do not work except at beginning of line! does -# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of -# line). -# From: greg small 8-30-84 -pckermit|pckermit12|UCB IBMPC Kermit 1.2, - am, - lines#25, - clear=\EH\EJ, ed@, el@, - is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, -# IBMPC Kermit 1.20 -# Cannot use line 25, now acts funny like ansi special scrolling region. -# Initialization must escape from that region by cursor position to line 24. -# Cannot use character insert because 1.20 goes crazy if insert at col 80. -# Does not use :am: because autowrap is lost when kermit dropped and restarted. -# From: greg small 12-19-84 -pckermit120|UCB IBMPC Kermit 1.20, - it#8, lines#24, - cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, - il1=\EL, - is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, - rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, -# MS-DOS Kermit 2.27 for the IBMPC -# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. -# Cannot use line 25, now acts funny like ansi special scrolling region. -# Initialization must escape from that region by cursor position to line 24. -# Does not use am: because autowrap is lost when kermit dropped and restarted. -# Reverse video for standout like H19. -# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) -# From: greg small 3-17-85 -msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, - OTbs, am@, - cols#80, it#8, lines#24, - clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, - cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, - home=\EH, ht=^I, il1=\EL, - is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, - kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, - rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, -# MS-DOS Kermit 2.27 with automatic margins -# From: greg small 3-17-85 -msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, - am, - cvvis=\EO\Eq\EG\EvK5, - is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, - use=msk227, -# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC -# Automatic margins now default. Use ansi for highlights. -# Define function keys. -# (msk22714: removed obsolete ":kn#10:" -- esr) -# From: greg small 3-17-85 -msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, - am, - bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, - is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, - kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, - kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, -# This was designed for a VT320 emulator, but it is probably a good start -# at support for the VT320 itself. -# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. -# (vt320-k3: I added / based on the init string -- esr) -vt320-k3|MS-Kermit 3.00's vt320 emulation, - am, eslok, hs, km, mir, msgr, xenl, - cols#80, it#8, lines#49, pb#9600, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, - flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, - fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, - is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, - kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, - kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, - rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, - rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, - rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, - sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, -# From: Joseph Gil 13 Dec 1991 -# ACS capabilities from Philippe De Muyter 30 May 1996 -# (I removed a bogus boolean :mo: and added , , -- esr) -vt320-k311|dec vt320 series as defined by kermit 3.11, - am, eslok, hs, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, - clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, - flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, - is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, - kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, - kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, - lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, - rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, - rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, - rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, - smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, - -######## NON-ANSI TERMINAL EMULATIONS -# +# tvi950-rv uses the appropriate entries from 950-4p and 950-rv +tvi950-rv-4p|televideo950 rev video w/4 pages, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek + \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 + \E\\3\E-07\s, + rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, use=tvi950, +# From: Andreas Stolcke +# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; +# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in +# the :rs: string, inserted the implied by the termcap :ko: string. Note +# the :ko: string had :cl: in it, which means that one of the original +# , had to be wrong; set because that's what +# the 950 has. Finally, corrected the string to match the 950 and what +# ko implies -- esr) +# If the BSD termcap file was right, would +# also work. +tvi955|televideo 955, + OTbs, mc5i, msgr@, + it#8, xmc@, + acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, + civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, + cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, + is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, + knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%, + rmam=\E[=7l, rmxon=^N, + rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0 + \Ef\r, + sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, + use=tvi950, +tvi955-w|955-w|televideo955 w/132 cols, + cols#132, + is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, +# use half-intensity as normal mode, full intensity as +tvi955-hb|955-hb|televideo955 half-bright, + bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, + sgr0=\EG0\E[=5h, use=tvi955, +# From: Humberto Appleton , 880521 UT Austin +# (tvi970: removed ":sg#0:"; removed =\E[m, =\E[m; +# added ////// from BRL. +# According to BRL we could have =\E>, =\E= but I'm not sure what +# it does to the function keys. I deduced /. +# also added empty to suppress tic warning, -- esr) +tvi970|televideo 970, + OTbs, OTpt, am, da, db, mir, msgr, + cols#80, it#8, lines#24, + acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, + cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, + ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, + is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, + kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, + rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smacs=\E(B, smam=\E[?7l, + smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, + smul=\E[4m, vpa=\E[%i%p1%dd, +tvi970-vb|televideo 970 with visual bell, + flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, + use=tvi970, +tvi970-2p|televideo 970 with using 2 pages of memory, + rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, + use=tvi970, +# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars +# per line (rather than 40), Esc K chooses the normal character set. Not sure +# padding is needed, but adapted from the tvi920c termcap. The and +# strings are klutzy, but at least use no screen space. +# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew , +# its absence means =\Ev isn't safe to use. -- esr) +# From: Gene Rochlin 9/19/84. +# The ////, and caps are from BRL, which says: +# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. +tvipt|televideo personal terminal, + OTbs, am, + cols#80, lines#24, + cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, + ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, + il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n, + kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, + rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, +# From: Nathan Peterson , 03 Sep 1996 +tvi9065|televideo 9065, + am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, + wnum#0, wsl#30, + acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, + blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, + cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, + cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, + dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, + el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1, + ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, + il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1, + ip=$<3>, + is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, + is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, + kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, + mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n, + pfkey=\E|%p1%{48}%+%c3%p2%s\031, + pfloc=\E|%p1%{48}%+%c2%p2%s\031, + pfx=\E|%p1%{48}%+%c1%p2%s\031, + pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, + rep=\E[%p2%db%p1%c, rev=\EG4, + rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, + rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, + rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, + rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, + rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1 + 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[= + 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0 + \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, + rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0 + \0\0, + sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%; + %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%? + %p9%t\E$%e\E%%%;, + sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, + smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, + tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, -#### Avatar -# -# These entries attempt to describe Avatar, a terminal emulation used with -# MS-DOS bulletin-board systems. It was designed to give ANSI-like -# capabilities, but with cheaper (shorter) control sequences. Messy design, -# excessively dependent on PC idiosyncracies, but apparently rather popular -# in the BBS world. -# -# No color support. Avatar doesn't fit either of the Tektronix or HP color -# models that terminfo knows about. An Avatar color attribute is the -# low 7 bits of the IBM-PC display-memory attribute. Bletch. -# -# I wrote these entries while looking at the Avatar spec. I don't have -# the facilities to test them. Let me know if they work, or don't. -# -# Avatar escapes not used by these entries (because maybe you're smarter -# and more motivated than I am and can figure out how to wrap terminfo -# around some of them, and because they are weird enough to be funny): -# level 0: -# ^L -- clear window/reset current attribute to default -# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: +#### Visual (vi) # -# bit: 6 5 4 3 2 1 0 -# | | | | | -# +---+---+ | +---+---+ -# | | | -# | | foreground color -# | foreground intensity -# background color -# level 0+: -# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines -# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines -# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 -# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 -# (^V^L and ^V^M set the current attribute as a side-effect.) -# ^V ^Y [...] -- repeat pattern. specifies the number of bytes -# in the pattern, the number of times the pattern -# should be repeated. If either value is 0, no-op. -# The pattern can contain Avatar console codes, -# including other ^V ^Y patterns. -# level 1: -# ^V^O -- clockwise mode on; turn print direction right each time you -# hit a window edge (yes, really). Turned off by CR -# ^V^P -- no-op -# ^V^Q%c -- query the driver -# ^V^R -- driver reset -# ^V^S -- Sound tone (PC-specific) -# ^V^T -- change highlight at current cursor poition to %c -# ^V^U%p1%c%p2%c -- highlight window with attribute -# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c -# -- define window +# In September 1993, Visual Technology of Westboro, Massachusetts, +# merged with White Pine Software of Nashua, New Hampshire. # -# From: Eric S. Raymond 1 Nov 1995 -# (The ///// capabilities exist only to -# tell ncurses that the corresponding highlights exist; it should use , -# which is the only method that will actually work for multiple highlights.) +# White Pine Software may be contacted at +1 603/886-9050. +# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. # -# Update by TD - 2004: half of this was inconsistent. Found documentation -# and repaired most of the damage. sgr0 is probably incorrect, but the -# available documentation gives no clues for a workable string. -avatar0|avatar terminal emulator level 0, - am, bce, msgr, - cols#80, it#8, lines#25, - blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, - cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, - ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, - rmacs@, rs2=^L, - sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, - sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, - use=klone+acs, -# From: Eric S. Raymond 1 Nov 1995 -avatar0+|avatar terminal emulator level 0+, - dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, -# From: Eric S. Raymond 1 Nov 1995 -avatar|avatar1|avatar terminal emulator level 1, - civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, - rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, -#### RBcomm -# -# RBComm is a lean and mean terminal emulator written by the Interrupt List -# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early -# '90s), especially in the BBS world, and still has some loyal users due to -# its very small memory footprint and to a cute macro language. -rbcomm|IBM PC with RBcomm and EMACS keybindings, - am, bw, mir, msgr, xenl, - cols#80, it#8, lines#25, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^C, cuf1=^B, - cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, - dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, - il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, - is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, - kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, - rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, - rmir=^], rmkx=\E>, rmso=^U, rmul=^U, - rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, - smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, -rbcomm-nam|IBM PC with RBcomm without autowrap, - am@, - bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, - is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, - kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, -rbcomm-w|IBM PC with RBcomm in 132 column mode, - cols#132, - bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, - is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, - kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, +# Visual 50 from Beau Shekita, BTL-Whippany +# Recently I hacked together the following termcap for Visual +# Technology's Visual 50 terminal. It's a slight modification of +# the vt52 termcap. +# It's intended to run when the Visual 50 is in vt52 emulation mode +# (I know what you're thinking; if it's emulating a vt52, then why +# another termcap? Well, it turns out that the Visual 50 can handle +# and db(?) among other things, which the vt52 can't) +# The termcap works OK for the most part. The only problem is on +# character inserts. The whole line gets painfully redrawn for each +# character typed. Any suggestions? +# Beau's entry is combined with the vi50 entry from University of Wisconsin. +# Note especially the function. - are really l4-l6 in +# disguise; - are really l1-l3. +vi50|visual 50, + OTbs, OTpt, am, da, db, msgr, + cols#80, it#8, lines#24, + OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, + ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, + kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, + nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, +# this one was BSD & SCO's vi50 +vi50adm|visual 50 in adm3a mode, + am, msgr, + cols#80, it#8, lines#24, + bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, + ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, + rmso=\ET, smso=\EU, +# From: Jeff Siegal +vi55|Visual 55, + OTbs, am, mir, msgr, + cols#80, it#8, lines#24, + clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, + cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, + il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, + smir=\Ea, smso=\EU, -######## LCD DISPLAYS -# +# Visual 200 from BRL +# The following switch settings are assumed for normal operation: +# FULL_DUPLEX SCROLL CR +# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE +# Other switches may be set for operator convenience or communication +# requirements. +# Character insertion is kludged in order to get around the "beep" misfeature. +# (This cap is commented out because / is more efficient -- esr) +# Supposedly "4*" delays should be used for , , , , +# and strings, but we seem to get along fine without them. +vi200|visual 200, + OTbs, OTpt, am, mir, msgr, + OTkn#10, cols#80, it#8, lines#24, + acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez, + clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed, + dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I, + hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev, + kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q, + kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, + kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL, + krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG, + rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, + sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg, +# The older Visuals didn't come with function keys. This entry uses +# and so that the keypad keys can be used as function keys. +# If your version of vi doesn't support function keys you may want +# to use vi200-f. +vi200-f|visual 200 no function keys, + is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, + kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, + kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, + use=vi200, +vi200-rv|visual 200 reverse video, + cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, -#### Matrix Orbital -# from: Eric Z. Ayers (eric@ale.org) +# the function keys are programmable but we don't reprogram them to their +# default values with because programming them is very verbose. maybe +# an initialization file should be made for the 300 and they could be stuck +# in it. +# (vi300: added / based on init string -- esr) +vi300|visual 300 ansi x3.64, + am, bw, mir, xenl, + cols#80, lines#24, + bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il1=\E[L, ind=\n, + is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, + kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, + kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, + rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, + smso=\E[1m, smul=\E[4m, +# some of the vi300s have older firmware that has the command +# sequence for setting editing extent reversed. +vi300-old|visual 300 with old firmware (set edit extent reversed), + is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300, + +# Visual 500 prototype entry from University of Wisconsin. +# The best place to look for the escape sequences is page A1-1 of the +# Visual 500 manual. The initialization sequence given here may be +# overkill, but it does leave out some of the initializations which can +# be done with the menus in set-up mode. +# The :xp: line below is so that emacs can understand the padding requirements +# of this slow terminal. :xp: is 10 time the padding factor. +# (vi500: removed unknown :xp#4: termcap; +# also added empty to suppress tic warning -- esr) +vi500|visual 500, + am, mir, msgr, + cols#80, it#8, lines#33, + acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r, + csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, + el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, + ind=\n, + is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G, + rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, + +# The visual 550 is a visual 300 with tektronix graphics, +# and with 33 lines. clear screen is modified here to +# also clear the graphics. +vi550|visual 550 ansi x3.64, + lines#33, + clear=\030\E[H\E[2J, use=vi300, + +vi603|visual603|visual 603, + hs, mir, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, + csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, + ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, + rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m, + tsl=\EP2~, use=vt100+4bsd, + +#### Wyse (wy) # -# Matrix Orbital 20x4 LCD display -# Command Character is 0xFE (decimal 254, octal 376) +# Wyse Technology +# 3471 North First Street +# San Jose, CA 95134 +# Vox: (408)-473-1200 +# Fax: (408) 473-1222 +# Web: http://www.wyse.com # -# On this device, cursor addressability isn't possible. The LCD expects: -# 0xfe G -# for cup: %p1 == row and %p2 is column +# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at +# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the +# obvious address, . They keep terminfo entries at +# https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm # -# This line: -# cup=\376G%p2%c%p1%c -# LOOKS like it will work, but sometimes only one of the two numbers is sent. -# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. # -# Alas, there is no cursor upline capability on this display. +# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. +# They now own the Qume and Amdek brands, too. So these are the people to +# talk with about all Link, Qume, and Amdek terminals. # -# These entries add some 'sanity stuff' to the clear function. That is, it -# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, -# and turns off the cursor blinking and stuff like that. +# These entries include a few small fixes. +# I canceled the bel capacities in the vb entries. +# I made two trivial syntax fixes in the wyse30 entry. +# I made some entries relative to adm+sgr. # -# NOTE: calling 'beep' turns on the backlight (bell) -# NOTE: calling 'flash' turns it on and back off (visual bell) # -MtxOrb|Generic Matrix Orbital LCD display, - bel=\376B^A, clear=\376X\376C\376R\376K\376T, - cnorm=\376K\376T, cub1=\376L, cuf1=\376M, - flash=\376B\001$<200>\376F, home=\376H, -MtxOrb204|20x4 Matrix Orbital LCD display, - cols#20, lines#4, use=MtxOrb, -MtxOrb162|16x2 Matrix Orbital LCD display, - cols#16, lines#2, use=MtxOrb, -# The end +# Note: The wyse75, wyse85, and wyse99 have been discontinued. -######## OLDER TERMINAL TYPES +# Although the Wyse 30 can support more than one attribute +# it requires magic cookies to do so. Many applications do not +# function well with magic cookies. The following terminfo uses +# the protect mode to support one attribute (dim) without cookies. +# If more than one attribute is needed then the wy30-mc terminfo +# should be used. # -# This section is devoted to older commercial terminal brands that are now -# discontinued, but known to be still in use or represented by emulations. +wy30|wyse30|Wyse 30, + am, bw, hs, mc5i, mir, msgr, xon, + cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, + civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H, + cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, + dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, + fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, + ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, + kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, + kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, + mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, + rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, + sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, + smso=\E`7\E), tbc=\E0, tsl=\EF, # - -#### AT&T (att, tty) +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). # -# This section also includes Teletype-branded VDTs. +# (wy30-mc: added to suppress tic warning --esr) +wy30-mc|wyse30-mc|wyse 30 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, + rmcup=\EG0, rmso=\EG0, + sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%? + %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8 + %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, + smso=\EG4, use=wy30, use=adm+sgr, +# The mandatory pause used by does not work with +# older versions of terminfo. If you see this effect then +# unset xon and delete the / from the delay. +# i.e. change $<100/> to $<100> +wy30-vb|wyse30-vb|wyse 30 visible bell, + bel@, use=wy30, # -# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now -# Boundless Technologies); for details, see the header comment on the ADDS -# section. +# The Wyse 50 can support one attribute (e.g. Dim, Inverse, +# Normal) without magic cookies by using the protect mode. +# The following description uses this feature, but when more +# than one attribute is put on the screen at once, all attributes +# will be changed to be the same as the last attribute given. +# The Wyse 50 can support more attributes when used with magic +# cookies. The wy50-mc terminal description uses magic cookies +# to correctly handle multiple attributes on a screen. # -# These are AT&T's official terminfo entries. All-caps aliases have been -# removed. +wy50|wyse50|Wyse 50, + am, bw, hs, mc5i, mir, msgr, xon, + cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, + acsc=a;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, cbt=\EI, + civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H, + cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, + ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r, + home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, + is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, + kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, + kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, + ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, + pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), + ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, + sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH + \002%e\EH\003%;, + sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, + smso=\E`6\E), tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, + kF11=^Aj\r, kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, + kF16=^Ao\r, kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, + kF6=^Ae\r, kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, # -att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, - am, eo, mir, msgr, xon, - cols#80, it#8, lines#24, - bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, - kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, - kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, - kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, - kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, - kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, - rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, - smso=\E[7m, -att2350|AT&T 2350 Video Information Terminal 80 column mode, - mc0@, mc4@, mc5@, use=att2300, - -# Must setup RETURN KEY - CR, REC'VD LF - INDEX. -# Seems upward compatible with vt100, plus ins/del line/char. -# On sgr, the protection parameter is ignored. -# No check is made to make sure that only 3 parameters are output. -# standout= reverse + half-intensity = 3 | 5. -# bold= reverse + underline = 2 | 3. -# note that half-bright blinking doesn't look different from normal blinking. -# NOTE:you must program the function keys first, label second! -# (att4410: a BSD entry has been seen with the following capabilities: -# , , , , , -# , , , -- esr) -att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, - am, hs, mir, msgr, xon, - cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, - acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, - dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, - ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, - is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, - kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, - kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, - ll=\E[24H, nel=^M^J, - pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, - pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, - sc=\E7, - sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, - tsl=\E7\E[25;%p1%{1}%+%dH, - -att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, - cols#132, wsl#132, - is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, - -att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, - OTbs, - pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, - use=att5410v1, - -att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, - cols#132, wsl#132, - is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, - -# 5410 in terms of a vt100 -# (v5410: added / based on init string -- esr) -v5410|att5410 in terms of a vt100, - am, mir, msgr, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub1=^H, cud1=^J, cuf1=\E[C$<2>, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, - dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, - enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, - il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, - kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, - rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, - rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, - sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, - smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, - use=vt100+fnkeys, - -# -# Teletype Model 5420 -- A souped up 5410, with multiple windows, -# even! the 5420 has three modes: scroll, window or page mode -# this terminfo should work in scroll or window mode, but doesn't -# take advantage of any of the differences between them. +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). # -# Has memory below (2 lines!) -# 3 pages of memory (plus some spare) -# The 5410 sequences for , , ,
, , , , -# , would work for these, but these work in both scroll and window -# mode... Unset insert character so insert mode works -# sets 80 column mode, -# escape sequence: -# 1) turn off all fonts -# 2) function keys off, keyboard lock off, control display off, -# insert mode off, erasure mode off, -# 3) full duplex, monitor mode off, send graphics off, nl on lf off -# 4) reset origin mode -# 5) set line wraparound -# 6) exit erasure mode, positional attribute mode, and erasure extent mode -# 7) clear margins -# 8) program ENTER to transmit ^J, -# We use \212 to program the ^J because a bare ^J will get translated by -# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. -# 1 2 3 4 5 6 7 8 -# set screen color to black, -# No representation in terminfo for the delete word key: kdw1=\Ed -# Key capabilities assume the power-up send sequence... -# This is not strictly necessary, but it helps maximize -# memory usefulness: , -# Alternate sgr0: , -# Alternate sgr: , -# smkx programs the SYS PF keys to send a set sequence. -# It also sets up labels f1, f2, ..., f8, and sends edit keys. -# This string causes them to send the strings - -# when pressed in SYS PF mode. -# (att4415: I added / based on the init string -- esr) -att4415|tty5420|att5420|AT&T 4415/5420 80 cols, - OTbs, db, mir, xon, - lh#2, lm#78, lw#8, nlab#8, wsl#55, - cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, - cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, - cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, - dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, - flash=\E[?5h$<200>\E[?5l, home=\E[x, - hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, - il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, - is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, - is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, - kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, - kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, - kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, - kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, - lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, - mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, - pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, - rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, - rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, - sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, - smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, - tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, - use=att4410, - -att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, - cols#132, lm#54, wsl#97, - is1=\E[?3h$<100>, use=att4415, - -att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, - flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, - -att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, - cols#132, lm#54, wsl#97, - flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, - use=att4415, - -# Note that this mode permits programming USER PF KEYS and labels -# However, when you program user pf labels you have to reselect -# user pf keys to make them appear! -att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, - kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, - pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, - pln=\E[%p1%d;0;0;1q%p2%:-16.16s, - -att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, - kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, - use=att4415, - -att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, - kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, - use=att4415-rv, - -att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, - kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, - use=att4415-w, - -att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, - kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, - use=att4415-w-rv, - -att5420_2|AT&T 5420 model 2 80 cols, - am, db, hs, mir, msgr, xon, - cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, - cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, - el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, - hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, - invis=\E[8m, - is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, - kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, - kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, - kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, - kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, - kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, - lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, - mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, - pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, - rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, - rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, - sc=\E7, - sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, - smso=\E[7m, smul=\E[4m, tbc=\E[3g, - tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, -att5420_2-w|AT&T 5420 model 2 in 132 column mode, - cols#132, - is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, - use=att5420_2, - -att4418|att5418|AT&T 5418 80 cols, - am, xon, - cols#80, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, - cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, - ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, - is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, - kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, - kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, - kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, - kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, - kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, - rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, - sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, -att4418-w|att5418-w|AT&T 5418 132 cols, - cols#132, - is1=\E[?3h, use=att5418, - -att4420|tty4420|teletype 4420, - OTbs, da, db, eo, msgr, ul, xon, - cols#80, lines#24, lm#72, - bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, - dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, - kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, - kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, - kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, - lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, - rmul=\EZ, smdc@, smso=\E}, smul=\E\\, +# The mandatory pause used by flash does not work with some +# older versions of terminfo. If you see this effect then +# unset and delete the / from the delay. +# i.e. change $<100/> to $<100> +# (wy50-mc: added to suppress tic warning --esr) +wy50-mc|wyse50-mc|wyse 50 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, + rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, + sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%? + %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8 + %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, + smso=\EGt, use=wy50, use=adm+sgr, +wy50-vb|wyse50-vb|wyse 50 visible bell, + bel@, use=wy50, +wy50-w|wyse50-w|wyse 50 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, + use=wy50, +wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, + bel@, use=wy50-w, -# The following is a terminfo entry for the Teletype 4424 -# asynchronous keyboard-display terminal. It supports -# the vi editor. The terminal must be set up as follows, -# -# HIGHLIGHT DEFINITION 3-TONE -# DISPLAY FUNCTION GROUP III # -# The second entry below provides limited (a la adm3a) -# operation under GROUP II. -# -# This must be used with DISPLAY FUNCTION GROUP I or III -# and HIGHLIGHT DEFINITION 3-TONE -# The terminal has either bold or blink, depending on options -# -# (att4424: commented out =\E[1m, we don't need bright locked on -- esr) -att4424|tty4424|teletype 4424, - OTbs, am, xon, - cols#80, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, - dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, - ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, - kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, - khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, - rmul=\EZ, - sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, - sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, - tbc=\EF, - -att4424-1|tty4424-1|teletype 4424 in display function group I, - kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, - use=att4424, - -# This entry is not one of AT&T's official ones, it was translated from the -# 4.4BSD termcap file. The highlight strings are different from att4424. -# I have no idea why this is -- older firmware version, maybe? -# The following two lines are the comment originally attached to the entry: -# This entry appears to avoid the top line - I have no idea why. -# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp -att4424m|tty4424m|teletype 4424M, - am, da, db, mir, - cols#80, it#8, lines#23, - bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, - dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, - is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smso=\E[7m, smul=\E[4m, - -# The Teletype 5425 is really version 2 of the Teletype 5420. It -# is quite similar, except for some minor differences. No page -# mode, for example, so all of the sequences used above have -# to change back to what's being used for the 5410. Many of the -# option settings have changed their numbering as well. +# The Wyse 350 is a Wyse 50 with color. +# Unfortunately this means that it has magic cookies. +# The color attributes are designed to overlap the reverse, dim and +# underline attributes. This is nice for monochrome applications +# because you can make underline stuff green (or any other color) +# but for true color applications it's not so hot because you cannot +# mix color with reverse, dim or underline. +# To further complicate things one of the attributes must be +# black (either the foreground or the background). In reverse video +# the background changes color with black letters. In normal video +# the foreground changes colors on a black background. +# This terminfo uses some of the more advanced features of curses +# to display both color and blink. In the final analysis I am not +# sure that the wy350 runs better with this terminfo than it does +# with the wy50 terminfo (with user adjusted colors). # -# This has been tested on a preliminary model. +# The mandatory pause used by flash does not work with +# older versions of terminfo. If you see this effect then +# unset xon and delete the / from the delay. +# i.e. change $<100/> to $<100> # -# (att5425: added / based on the init string -- esr) -att5425|tty5425|att4425|AT&T 4425/5425, - am, da, db, hs, mir, msgr, xenl, xon, - cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, - clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, - el=\E[K, el1=\E[1K, enacs=\E(B\E)0, - flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, - hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, - invis=\E[8m, is1=\E<\E[?3l$<100>, - is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, - is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, - kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, - kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, - kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, - kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, - nel=^M^J, - pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, - rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, - rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, - rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, - sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, - vpa=\E[%p1%{1}%+%dd, - -att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, - smkx=\E[21;1j\E[25;4j\Eent, use=att4425, - -att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, - cols#132, lm#54, wsl#97, - is1=\E[?3h$<100>, use=tty5425, - -# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. -# I also added / -- esr) -att4426|tty4426|teletype 4426S, - am, da, db, xon, - cols#80, lines#24, lm#48, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, - cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, - hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, - il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, - is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, - kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, - kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, - nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, - rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, - rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, - smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, - vpa=\E[%p1%dd, - -# Terminfo entry for the AT&T 510 A Personal Terminal -# Function keys 9 - 16 are available only after the -# screen labeled (soft keys/action blocks) are labeled. Function key -# 9 corresponds to the leftmost touch target on the screen, -# function key 16 corresponds to the rightmost. +# Bug: The capability resets attributes. +wy350|wyse350|Wyse 350, + am, bw, hs, mc5i, mir, xon, + colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, + wsl#45, xmc#1, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, + cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, + cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, + dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, + flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1, + il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, + is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, + ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, + ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0, + pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, + rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, + setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e + %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e + %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48} + %+%c, + sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0} + %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t + %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH + \002%e\EH\003%;, + sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, + smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, +wy350-vb|wyse350-vb|wyse 350 visible bell, + bel@, use=wy350, +wy350-w|wyse350-w|wyse 350 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, + use=wy350, +wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, + bel@, use=wy350-w, # -# This entry is based on one done by Ernie Rice at Summit, NJ and -# changed by Anne Gallup, Skokie, IL, ttrdc!anne -att510a|bct510a|AT&T 510A Personal Terminal, - am, mir, msgr, xenl, xon, - cols#80, lh#2, lines#24, lw#7, nlab#8, - acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, - civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, - dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, - el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, - hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, - is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, - kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, - kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, - kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, - mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, - pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, - rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, - sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, - -# Terminfo entry for the AT&T 510 D Personal Terminal -# Function keys 9 through 16 are accessed by bringing up the -# system blocks. -# Function key 9 corresponds to the leftmost touch target on the screen, -# function key 16 corresponds to the rightmost. +# This terminfo description is untested. +# The wyse100 emulates an adm31, so the adm31 entry should work. # -# There are problems with soft key labeling. These are due to -# strangenesses in the native terminal that are impossible to -# describe in a terminfo. -att510d|bct510d|AT&T 510D Personal Terminal, - am, da, db, mir, msgr, xenl, xon, - cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, - acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, - clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, - cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, - cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, - dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, - el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, - hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, - invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, - kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, - kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, - kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, - kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, - mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, - pln=\E[%p1%dp%p2%:-16s, rc=\E8, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, - rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, - rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, - rs2=\E[5;0|, sc=\E7, - sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, - smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, - smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, - -# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) -att500|att513|AT&T 513 using page mode, - am, chts, mir, msgr, xenl, xon, - cols#80, lh#2, lines#24, lw#8, nlab#8, - acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, - clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, - csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, - hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, - indn=\E[%p1%dE, invis=\E[8m, - is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, - kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, - kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, - kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, - kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, - kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, - kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, - kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, - kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, - kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, - kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, - khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, - kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, - kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, - kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, - ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, - mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, - nel=\EE, - pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, - pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, - pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, - pln=\E[%p1%dp%p2%:-16s, rc=\E8, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, - rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, - rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, - rmul=\E[m, - rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, - rs2=\E[5;0|, sc=\E7, - sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smir=\E[4h, - smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, - smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, - -# 01-07-88 -# printer must be set to EMUL ANSI to accept ESC codes -# stops at top margin -# sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font -# and alt font ascii,wrap on,tabs cleared -# disables newline on LF,Emphasized off -# The capability sets form length -att5310|att5320|AT&T Model 53210 or 5320 matrix printer, - xhpa, xvpa, - bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, - orhi#100, orl#12, orvi#72, - cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, - cr=^M, - csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, - cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, - ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, - lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, - rshm=\E[m, - scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, - smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, - smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, - u0=\E[%p1%dt, vpa=\E[%p1%dd, - -# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL -# The following SET-UP modes are assumed for normal operation: -# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL -# Other SET-UP modes may be set for operator convenience or communication -# requirements. This termcap description is for the Resident Terminal Mode. -# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! -# The BRL entry also said: UNSAFE :ll=\E[70H: -att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, - am, xon, - cols#88, it#8, lines#70, vt#3, - bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, - dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, - home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, - il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, - kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, - rs1=\Ec, sc=\E7, - -# 5620 terminfo (2.0 or later ROMS with char attributes) -# The following SET-UP modes are assumed for normal operation: -# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR -# Other SET-UP modes may be set for operator convenience or communication -# requirements. This termcap description is for Resident Terminal Mode. No -# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! -# assumptions: (scroll forward one line) is only done at screen bottom -# Be aware that older versions of the dmd have a firmware bug that affects -# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. -# is from an otherwise inferior BRL for this terminal. That entry -# also has =\E[70H commented out and marked unsafe. -# For more, see the 5620 FAQ maintained by David Breneman . -att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, - OTbs, am, msgr, npc, xon, - cols#88, it#8, lines#70, - bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, - cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, - indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, - pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, - rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, - sgr0=\E[0m, smso=\E[7m, smul=\E[4m, -att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, - lines#24, use=att5620, -att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, - lines#34, use=att5620, -# 5620 layer running the "S" system's downloaded graphics handler: -att5620-s|tty5620-s|layer|vitty|5620 S layer, - OTbs, OTpt, am, - cols#80, it#8, lines#72, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, - cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, - el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, - kll=\E[70;1H, +wy100|wyse 100, + hs, mir, + cols#80, lines#24, xmc#1, + bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n, + invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, + kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, + rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, +# +# The Wyse 120/150 has most of the features of the Wyse 60. +# This terminal does not need padding up to 9600 baud! +# should be set but the clear screen fails when in +# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear +# then set . +# +wy120|wyse120|wy150|wyse150|Wyse 120/150, + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, + acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, + cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, + dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, + flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>, + hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 + \024\El, + is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, + rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, + rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, + rs3=\EwG\Ee($<100>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} + %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t + %{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, use=adm+sgr, +# +wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, + rs2=\E`;$<70>, use=wy120, +# +wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy120, +# +wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, +# +wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, + bel@, use=wy120, +# +wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, + bel@, use=wy120-w, +# +# The Wyse 60 is like the Wyse 50 but with more padding. +# The reset strings are slow and the pad times very depending +# on other parameters such as font loading. I have tried +# to follow the following outline: +# +# -> set personality +# -> set number of columns +# -> set number of lines +# -> select the proper font +# -> do the initialization +# -> set up display memory (2 pages) +# +# The Wyse 60's that have vt100 emulation are slower than the +# older Wyse 60's. This change happened mid-1987. +# The capabilities effected are +# +# The meta key is only half right. This terminal will return the +# high order bit set when you hit CTRL-function_key +# +# It may be useful to assign two function keys with the +# values \E=(\s look at old data in page 1 +# \E=W, look at bottom of page 1 +# where \s is a space ( ). +# +# Note: +# The Wyse 60 runs faster when the XON/XOFF +# handshake is turned off. +# +# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid +# a bug reported by Robert Dunn, -- esr) +wy60|wyse60|Wyse 60, + am, bw, hs, km, mc5i, mir, msgr, + cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, + acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, + cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, + ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r, + home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, + ip=$<3>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 + \024\El, + is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, + rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, + rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, + rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} + %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t + %{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, + kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, + kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, + kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, +# +wy60-w|wyse60-w|wyse 60 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, + rs2=\EeF$<150>\E`;$<150>, use=wy60, +# +wy60-25|wyse60-25|wyse 60 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy60, +wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, +# +wy60-42|wyse60-42|wyse 60 80-column 42-lines, + lines#42, + clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, + dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, + ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, + ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, +wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, + cols#132, lw#7, nlab#16, wsl#97, + clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, + dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, + nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, +# +wy60-43|wyse60-43|wyse 60 80-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy60-42, +wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy60-42-w, +# +wy60-vb|wyse60-vb|Wyse 60 visible bell, + bel@, use=wy60, +wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, + bel@, use=wy60-w, -# Entries for thru refer to the shifted system pf keys. +# The Wyse-99GT looks at lot like the Wyse 60 except that it +# does not have the 42/43 line mode. In the Wyse-60 the "lines" +# setup parameter controls the number of lines on the screen. +# For the Wyse 99GT the "lines" setup parameter controls the +# number of lines in a page. The screen can display 25 lines max. +# The Wyse-99GT also has personalities for the VT220 and +# Tektronix 4014. But this has no bearing on the native mode. # -# Entries for thru refer to the alternate keypad mode -# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER -att605|AT&T 605 80 column 102key keyboard, - am, eo, xon, - cols#80, lines#24, lw#8, nlab#8, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, - cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, - dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, - il1=\E[L, ind=^J, invis=\E[8m, - is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, - kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, - kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, - kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, - kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, - kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, - kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, - kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, - kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, - kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, - kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, - kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, - kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, - mc4=\E[?4i, mc5=\E[?5i, nel=\EE, - pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, - rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, - rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, - smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, - tsl=\E7\E[25;%i%p1%dx, -att605-pc|ATT 605 in pc term mode, - acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, - cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, - dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, - kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, - kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, - kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, - rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, - xonc=e, use=att605, -att605-w|AT&T 605-w 132 column 102 key keyboard, - cols#132, wsl#132, - is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, - use=att605, -# (att610: I added / based on the init string. I also -# added and because the BSD file says the att615s have them, -# and the 615 is like a 610 with a big keyboard, and most of their other -# smart terminals support the same sequence -- esr) -att610|AT&T 610; 80 column; 98key keyboard, - am, eslok, hs, mir, msgr, xenl, xon, - cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, - indn=\E[%p1%dS, invis=\E[8m, - is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, - is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, - kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, - kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, - kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, - kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, - nel=\EE, - pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, - ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, - rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, -att610-w|AT&T 610; 132 column; 98key keyboard, - cols#132, wsl#132, - is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, - use=att610, - -att610-103k|AT&T 610; 80 column; 103key keyboard, - kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, - kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, - kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, - kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, - kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, - kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, - kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, - kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, - khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, - knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, - kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, - krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, - kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, -att610-103k-w|AT&T 610; 132 column; 103key keyboard, - cols#132, wsl#132, - is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, - use=att610-103k, -att615|AT&T 615; 80 column; 98key keyboard, - kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, - kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, - kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, - kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, - kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, - kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, - kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, -att615-w|AT&T 615; 132 column; 98key keyboard, - kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, - kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, - kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, - kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, - kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, - kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, - kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, -att615-103k|AT&T 615; 80 column; 103key keyboard, - kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, -att615-103k-w|AT&T 615; 132 column; 103key keyboard, - kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, -# (att620: I added / based on the init string and -# / from a BSD termcap -- esr) -att620|AT&T 620; 80 column; 98key keyboard, - am, eslok, hs, mir, msgr, xenl, xon, - cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, - indn=\E[%p1%dS, invis=\E[8m, - is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, - is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, - kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, - kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, - kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, - kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, - kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, - kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, - kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, - kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, - kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, - kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, - mc4=\E[?4i, mc5=\E[?5i, nel=\EE, - pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, - ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, - rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, - rs2=\Ec\E[?3l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, - smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, - tsl=\E7\E[25;%i%p1%dx, -att620-w|AT&T 620; 132 column; 98key keyboard, - cols#132, wsl#132, - is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, - use=att620, -att620-103k|AT&T 620; 80 column; 103key keyboard, - kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, - kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, - kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, - kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, - kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, - kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, - kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, - kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, - kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, - kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, - kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, - kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, - kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, - kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, - kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, - ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, - -att620-103k-w|AT&T 620; 132 column; 103key keyboard, - cols#132, wsl#132, - is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, - use=att620-103k, - -# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal -# The following SETUP modes are assumed for normal operation: -# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF -# Font_Size=Large Non-Layers_Window_Cols=80 -# Non-Layers_Window_Rows=60 -# Other SETUP modes may be set for operator convenience or communication -# requirements. Some capabilities assume a printer attached to the Aux EIA -# port. This termcap description is for the Fixed Non-Layers Window. No -# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! -# (att630: added , and from a BSD termcap file -- esr) -att630|AT&T 630 windowing terminal, - OTbs, am, da, db, mir, msgr, npc, xon, - cols#80, it#8, lines#60, lm#0, - bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, - dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, - el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, - kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, - kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, - kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, - kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, - kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, - mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, - rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, - rmul=\E[m, rs2=\Ec, sc=\E7, - sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, - sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, -att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, - lines#24, use=att630, - -# This is the att700 entry for 700 native emulation of the AT&T 700 -# terminal. Comments are relative to changes from the 605V2 entry and -# att730 on which the entry is based. Comments show the terminfo -# capability name, termcap name, and description. -# -# Here is what's going onm in the init string: -# ESC [ 50;4| set 700 native mode (really is 605) -# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) -# ESC [ 53;0| set GenFlow to Xon/Xoff -# ESC [ 8 ;0| set CR on NL -# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) -# ESC [ ? 4 l jump scroll -# ESC [ ? 5 l/h video: normal (l); reverse (h) -# ESC [ ?13 l Labels on -# ESC [ ?15 l parity check = no -# ESC [ 13 l monitor mode off -# ESC [ 20 l LF on NL (not CRLF on NL) -# ESC [ ? 7 h autowrap on -# ESC [ 12 h local echo off -# ESC ( B GO = ASCII -# ESC ) 0 G1 = Special Char & Line Drawing -# ESC [ ? 31 l Set 7 bit controls -# -# Note: Most terminals, especially the 600 family use Reverse Video for -# standout mode. DEC also uses reverse video. The VT100 uses bold in addition -# Assume we should stay with reverse video for 70.. However, the 605V2 exits -# standout mode with \E[m (all normal attributes). The 730 entry simply -# exits reverse video which would leave other current attributes intact. It -# was assumed the 730 entry to be more correct so rmso has changed. The -# 605V2 has no sequences to turn individual attributes off, thus its setting -# and the rmso/smso settings from the 730. -# -# Note: For the same reason as above in rmso I changed exit under-score mode -# to specifically turn off underscore, rather than return to all normal -# attributes -# -# Note: The following pkey_xmit is taken from the 605V2 which contained the -# capability as pfxl. It was changed here to pfx since pfxl -# will only compile successfully with Unix 4.0 tic. Also note that pfx only -# allows strings to be parameters and label values must be programmed as -# constant strings. Supposedly the pfxl of Version 4.0 allows both labels -# and strings to be parameters. The 605V2 pfx entry should be examined later -# in this regard. For reference the 730 pfxl entry is shown here for comparison -# 730 pfx entry: -# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s -# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, -# -# (for 4.0 tic) -# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, -# -# (for <4.0 tic) -# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, +# (msgr) should be set but the clear screen fails when in +# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear +# then set msgr, else use msgr@. # -# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 +# u0 -> enter Tektronix mode +# u1 -> exit Tektronix mode # -# Port1 Interface +wy99gt|wyse99gt|Wyse 99gt, + msgr@, + clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, + el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, + il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, + ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, + u0=\E~>\E8, u1=\E[42h, use=wy60, # -# modular 10 pin Connector -# Left side Right side -# Pin 1 2 3 4 5 6 7 8 9 10 +wy99gt-w|wyse99gt-w|wyse 99gt 132-column, + cols#132, lw#7, nlab#16, wsl#97, + clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, + dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, + use=wy99gt, # -# Key (notch) at bottom +wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, # -# Pin 1 DSR -# 3 DCD -# 4 DTR -# 5 Sig Ground -# 6 RD -# 7 SD -# 8 CTS -# 9 RTS -# 10 Frame Ground +wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs2=\E`;$<150>, use=wy99gt-w, # -# The manual is 189 pages and is loaded with details about the escape codes, -# etc..... Available from AT&T CIC 800-432-6600... -# ask for Document number 999-300-660.. +wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, + bel@, use=wy99gt, # -att700|AT&T 700 24x80 column display w/102key keyboard, - am, eslok, hs, mir, msgr, xenl, xon, - cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, - fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, - il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, - is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, - is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, - kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, - kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, - kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, - kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, - kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, - kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, - kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, - kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, - kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, - kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, - kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, - mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, - pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, - rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, - rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, - smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, - tsl=\E7\E[99;%i%p1%dx, +wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, + bel@, use=wy99gt-w, -# This entry was modified 3/13/90 by JWE. -# fixes include additions of , correcting , and modification -# of . (See comments below) -# att730 has status line of 80 chars -# These were commented out: , , -# the and up keys are used for shifted system Fkeys -# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is -# currently the same as (unshifted HOME or \E[H). On the 102, 102+1 -# and 122 key keyboards, the 730's translation is \E[2J. For consistency -# has been commented out. The user can uncomment if using the -# 102, 102+1, or 122 key keyboards -# kHOM=\E[2J, -# (att730: I added / based on the init string -- esr) -att730|AT&T 730 windowing terminal, - am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, - cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, +# Can't set tabs! Other bugs (ANSI mode only): +# - can't redefine function keys (anyway, key redefinition in ANSI mode +# is too much complex to be described); +# - meta key can't be described (the terminal forgets it when reset); +# The xon-xoff handshaking can't be disabled while in ansi personality, so +# emacs can't work at speed greater than 9600 baud. No padding is needed at +# this speed. +# dch1 has been commented out because it causes annoying glittering when +# vi deletes one character at the beginning of a line with tabs in it. +# dch makes sysgen(1M) have a horrible behaviour when deleting +# a screen and makes screen(1) behave badly, so it is disabled too. The nice +# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are +# not, so smir and rmir are commented out as well. +# From: Francesco Potorti` , 24 Aug 1998 +wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), + am, km, mc5i, mir, msgr, xenl, + cols#80, it#8, lines#25, vt#3, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, - clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, - dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, - enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, - home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, - ind=\ED, invis=\E[8m, - is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, - is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, - kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, - kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, - kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, - kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, - kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, - kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, - kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, - kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, - kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, - kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, - kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, - mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, - pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, - pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, - pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, - rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, - rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, - sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, - smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, - swidm=\E#6, tsl=\E7\E[;%i%p1%dx, -att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, - lines#41, use=att730, -att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, - lines#24, use=att730, -att730r|730MTGr|AT&T 730 rev video windowing terminal Version, - flash=\E[?5l$<200>\E[?5h, - is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, - use=att730, -att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, - lines#41, use=att730r, -att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, - lines#24, use=att730r, + clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, + cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, + cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, + enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, + il1=\E[L, ind=\n$<1>, invis=\E[8m, + is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4 + ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, + kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, + kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, + kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, + mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, + rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, + rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16 + ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E + \E[4i, + sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%? + %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, + sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, + +# This is the american terminal. Here tabs work fine. +# From: Francesco Potorti` , 24 Aug 1998 +wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), + hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, + +# This terminal (firmware version 02) has a lot of bugs: +# - can't set tabs; +# - other bugs in ANSI modes (see above). +# This description disables handshaking when using cup. This is because +# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal +# cannot be used at speeds greater than 9600 baud, because at greater +# speeds handshaking is needed even for character sending. If you use +# DTR handshaking, you can use even greater speeds. +# From: Francesco Potorti` , 24 Aug 1998 +wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, it#8, lines#25, wsl#46, + acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, + blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, + cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, + ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, + flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE, + ind=\n, invis=\EG3, + is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E + \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er + \Ee"\EcD\024, + ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, + kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, + kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, + nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., + rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, + rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E` + 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/ + \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, + sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t + %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%? + %p9%t\EcE%e\EcD%;, + sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, + smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, + +# This is the american terminal. Here tabs work. +# From: Francesco Potorti` , 24 Aug 1998 +wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), + hts=\E1, tbc=\E0, use=wy99f, -# The following represents the screen layout along with the associated -# bezel buttons for the 5430/pt505 terminal. The "kf" designations do -# not appear on the screen but are shown to reference the bezel buttons. -# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate -# position relative to the screen. # +# The Wyse 160 is combination of the WY-60 and the WY-99gt. +# The reset strings are slow and the pad times very depending +# on other parameters such as font loading. I have tried +# to follow the following outline: # +# -> set personality +# -> set number of columns +# -> set number of lines +# -> select the proper font +# -> do the initialization +# -> set up display memory (2 pages) # -# +----------------------------------------------------------------+ -# | | -# XXXX | kf0 kf24 | XXXX -# | | -# | | -# XXXX | kf1 kf23 | XXXX -# | | -# | | -# XXXX | kf2 kf22 | XXXX -# | | -# | | -# XXXX | kf3 kf21 | XXXX -# | | -# | | -# XXXX | kf4 kf20 | XXXX -# | | -# | | -# XXXX | kf5 kf19 | XXXX -# | | -# | | -# XXXX | kf6 kf18 | XXXX -# | | -# | | -# XXXX | | XXXX -# | | -# | | -# +----------------------------------------------------------------+ +# The display memory may be used for either text or graphics. +# When "Display Memory = Shared" the terminal will have more pages +# but garbage may be left on the screen when you switch from +# graphics to text. If "Display Memory = Unshared" then the +# text area will be only one page long. # -# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX +# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid +# a bug reported by Robert Dunn, -- esr) +wy160|wyse160|Wyse 160, + am, bw, hs, km, mc5i, mir, msgr, + cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, + acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, + cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, + dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, + el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I, + hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 + \024\El, + is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, + rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, + rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, + rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} + %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t + %{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, use=adm+sgr, # -# Note: XXXX represents the screen buttons -# CMD REDRAW +wy160-w|wyse160-w|wyse 160 132-column, + cols#132, lw#7, nlab#16, wsl#90, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, + rs2=\EeF$<150>\E`;$<150>, use=wy160, # -# MAIL +wy160-25|wyse160-25|wyse 160 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy160, +wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, # -# version 1 note: -# The character string sent by key 'kf26' may be user programmable -# to send either \E[16s, or \E[26s. -# The character string sent by key 'krfr' may be user programmable -# to send either \E[17s, or \E[27s. -# -# Depression of the "CMD" key sends \E! (kcmd) -# Depression of the "MAIL" key sends \E[26s (kf26) -# "REDRAW" same as "REFRESH" (krfr) -# -# "kf" functions adds carriage return to output string if terminal is in -# 'new line' mode. -# -# The following are functions not covered in the table above: -# -# Set keyboard character (SKC): \EPn1;Pn2w -# Pn1= 0 Back Space key -# Pn1= 1 Break key -# Pn2= Program char (hex) -# -# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t -# Pn1= Window number (1-39) -# Pn2-Pn5= Y;X;Y;X coordinates -# -# Screen Selection (SSL): \E[Pnu -# Pn= Window number -# -# Set Terminal Modes (SM): \E[Pnh -# Pn= 3 Graphics mode -# Pn= > Cursor blink -# Pn= < Enter new line mode -# Pn= = Enter reverse insert/replace mode -# Pn= ? Enter no scroll mode -# -# Reset Terminal Mode (RM): \E[Pnl -# Pn= 3 Exit graphics mode -# Pn= > Exit cursor blink -# Pn= < Exit new line mode -# Pn= = Exit reverse insert/replace mode -# Pn= ? Exit no scroll mode -# -# Screen Status Report (SSR): \E[Pnp -# Pn= 0 Request current window number -# Pn= 1 Request current window dimensions +wy160-42|wyse160-42|wyse 160 80-column 42-lines, + lines#42, + clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, + ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, + rs3=\Ee*$<150>, use=wy160, +wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, + cols#132, lw#7, nlab#16, wsl#90, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, + rs2=\EeF$<150>\E`;$<150>, use=wy160-42, # -# Device Status Report (DSR): \E[6n Request cursor position +wy160-43|wyse160-43|wyse 160 80-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy160-42, +wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy160-42-w, # -# Call Status Report (CSR): \E[Pnv -# Pn= 0 Call failed -# Pn= 1 Call successful +wy160-vb|wyse160-vb|Wyse 160 visible bell, + bel@, use=wy160, +wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, + bel@, use=wy160-w, # -# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string -# Pn1= Button number to be loaded -# Pn2= Character count of "string" -# Pn3= Key mode being loaded: -# 0= Unshifted -# 1= Shifted -# 2= Control -# String= Text string (15 chars max) +# The Wyse 75 is a vt100 lookalike without advanced video. # -# Screen Number Report (SNR): \E[Pnp -# Pn= Screen number +# The Wyse 75 can support one attribute (e.g. Dim, Inverse, +# Underline) without magic cookies. The following description +# uses this capability, but when more than one attribute is +# put on the screen at once, all attributes will be changed +# to be the same as the last attribute given. +# The Wyse 75 can support more attributes when used with magic +# cookies. The wy75-mc terminal description uses magic cookies +# to correctly handle multiple attributes on a screen. # -# Screen Dimension Report (SDR): \E[Pn1;Pn2r -# Pn1= Number of rows available in window -# Pn2= Number of columns available in window +wy75|wyse75|wyse 75, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, lines#24, ma#1, pb#1201, wsl#78, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, + cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, + dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, + dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, + ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, + ind=\n$<2>, ip=$<1>, + is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, + is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, + kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, + kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, + kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, + mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, + rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, + sc=\E7, + sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t + \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t + \016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, + tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, # -# Cursor Position Report (CPR): \E[Pn1;Pn2R -# Pn1= "Y" Position of cursor -# Pn2= "X" Position of cursor +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). # -# Request Answer Back (RAB): \E[c +wy75-mc|wyse75-mc|wyse 75 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, + rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, + sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%? + %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9 + %t\016%e\017%;, + sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, + use=wy75, +wy75-vb|wyse75-vb|wyse 75 with visible bell, + pb@, + bel@, use=wy75, +wy75-w|wyse75-w|wyse 75 in 132 column mode, + cols#132, wsl#130, + rs2=\E[35h\E[?3h$<80>, use=wy75, +wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, + pb@, + bel@, use=wy75-w, # -# Answer Back Response (ABR): \E[?;*;30;VSV -# *= 0 No printer available -# *= 2 Printer available -# V= Software version number -# SV= Software sub version number -# (printer-available field not documented in v1) +# Wyse 85 emulating a vt220 7 bit mode. +# 24 line screen with status line. # -# Screen Alignment Aid: \En +# The vt220 mode permits more function keys but it wipes out +# the escape key. I strongly recommend that be set to +# escape (esc). +# The terminal may have to be set for 8 data bits and 2 stop +# bits for the arrow keys to work. +# The Wyse 85 runs faster with XON/XOFF enabled. Also the +# and work best when XON/XOFF is set. and +# leave trash on the screen when used without XON/XOFF. # -# Bell (lower pitch): \E[x +wy85|wyse85|wyse 85, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, + dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, + ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, + enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l, + fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, + ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, + is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, + mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, + rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, + rs3=\E[?5l, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? + %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, # -# Dial Phone Number: \EPdstring\ -# string= Phone number to be dialed +# Wyse 85 with visual bell. +wy85-vb|wyse85-vb|wyse 85 with visible bell, + bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85, # -# Set Phone Labels: \EPpstring\ -# string= Label for phone buttons +# Wyse 85 in 132-column mode. +wy85-w|wyse85-w|wyse 85 in 132-column mode, + cols#132, wsl#132, + rs2=\E[35h$<70/>\E[?3h, use=wy85, # -# Set Clock: \EPchour;minute;second\ +# Wyse 85 in 132-column mode with visual bell. +wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, + bel@, use=wy85-w, + +# From: Kevin Turner , 12 Jul 1998 +# This copes with an apparent firmware bug in the wy85. He writes: +# "What I did was change leave the terminal cursor keys set to Normal +# (instead of application), and change \E[ to \233 for all the keys in +# terminfo. At one point, I found some reference indicating that this +# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just +# me), but I can't find that and the server under my bookmark to "Wyse +# Technical" isn't responding. So there's the question of whether the wy85 +# terminfo should reflect the manufacturer's intended behaviour of the terminal +# or the actual." +wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, + dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, + ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, + enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l, + fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, + ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, + is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, + kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, + kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, + kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, + kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, + kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, + kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, + kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, + khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, + kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, + mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, + rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, + rs3=\E[?5l, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? + %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[40h\E7\E[25;%i%p1%dH, # -# Position Clock: \EPsY;X\ -# Y= "Y" coordinate -# X= "X" coordinate +# Wyse 185 emulating a vt320 7 bit mode. # -# Delete Clock: \Epr\ +# This terminal always displays 25 lines. These lines may be used +# as 24 data lines and a terminal status line (top or bottom) or +# 25 data lines. The 48 and 50 line modes change the page size +# and not the number of lines on the screen. # -# Programming The Function Buttons: \EPfPn;string\ -# Pn= Button number (00-06, 18-24) -# (kf00-kf06, kf18-kf24) -# string= Text to sent on button depression +# The Compose Character key can be used as a meta key if changed +# by set-up. # -# The following in version 2 only: -# -# Request For Local Directory Data: \EPp12;\ -# -# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ +wy185|wyse185|wyse 185, + am, hs, km, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, + dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, + dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, + el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8, + home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, + ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, + ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, + is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, + kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, + knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, + lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, + ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, + rmkx=\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, + rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? + %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, + smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, + use=vt220+keypad, # -# Request for Local Directory Data in print format: \EPp13;\ +# Wyse 185 with 24 data lines and top status (terminal status) +wy185-24|wyse185-24|wyse 185 with 24 data lines, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, + use=wy185, # -# Enable 'Prt on Line' mode: \022 (DC2) +# Wyse 185 with visual bell. +wy185-vb|wyse185-vb|wyse 185+flash, + bel@, use=wy185, # -# Disable 'Prt on Line' mode: \024 (DC4) +# Wyse 185 in 132-column mode. +wy185-w|wyse185-w|wyse 185 in 132-column mode, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, # +# Wyse 185 in 132-column mode with visual bell. +wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, + bel@, use=wy185-w, -# 05-Aug-86: -# The following Terminfo entry describes functions which are supported by -# the AT&T 5430/pt505 terminal software version 2 and later. -att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, - am, xon, - cols#80, it#8, lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, - cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, - il=\E[%p1%dL, il1=\E[L, ind=^J, - is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[l\E[=l\E[?l, - kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, - kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, - kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, - kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, - kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, - krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, - rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, - rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, - smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, +# wy325 terminfo entries +# Done by Joe H. Davis 3-9-92 -# The following Terminfo entry describes functions which are supported by -# the AT&T 5430/pt505 terminal software version 1. -att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, - lines#24, - mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, -tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, - lines#22, use=att505, -# -#### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- -# This cut mark helps make life less painful for people running ncurses tic -# on machines with relatively little RAM. The file can be broken in half here -# cleanly and compiled in sections -- no `use' references cross this cut -# going forward. +# lines 25 columns 80 # +wy325|wyse325|Wyse epc, + am, bw, hs, mc5i, mir, + cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, + acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, + cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, + dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, + flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1, + il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, + is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024 + \El, + is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, + mc0=\EP, mc4=^T, mc5=\Ed#, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, + rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, + rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, + rs3=\EwG\Ee($<100>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} + %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t + %{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, + tsl=\EF, use=adm+sgr, -#### Ampex (Dialogue) # -# Yes, these are the same people who are better-known for making audio- and -# videotape. I'm told they are located in Redwood City, CA. +# lines 24 columns 80 vb # +wy325-vb|wyse325-vb|wyse-325 with visual bell, + bel@, use=wy325, -# From: Fri Sep 11 22:38:32 1981 -# (ampex80: some capabilities merged in from SCO's entry -- esr) -ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, - OTbs, am, bw, ul, - cols#80, it#8, lines#24, - bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, - ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, - smso=\Ej, smul=\El, tbc=\E3, -# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: -ampex175|ampex d175, - am, - cols#80, lines#24, - bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, - is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, - kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, - rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, -# No backspace key in the main QWERTY cluster. Fortunately, it has a -# NEWLINE/PAGE key just above RETURN that sends a strange single-character -# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS -# mode), this key can be used as the erase key; I find I like this. Because -# some people and some systems may not, there is another termcap ("ampex175") -# that suppresses this little eccentricity by omitting the relevant capability. -ampex175-b|ampex d175 using left arrow for erase, - kbs=^_, use=ampex175, -# From: Richard Bascove -# (ampex210: removed obsolete ":kn#10:" -- esr) -ampex210|a210|ampex a210, - OTbs, am, hs, xenl, - cols#80, it#8, lines#24, xmc#1, - cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, - fsl=\E.2, home=^^, ht=^I, ich1=\EQ, - if=/usr/share/tabset/std, il1=\EE, invis@, - is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, - kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, - kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, - kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, - tsl=\E.0\Eg\E}\Ef, use=adm+sgr, -# (ampex219: I added / based on the init string, added -# from ampex219w, added =\E[?3l, irresistibly suggested by , -# and moved the padding to be *after* the caps -- esr) -ampex219|ampex-219|amp219|Ampex with Automargins, - hs, xenl, - cols#80, it#8, lines#24, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, - clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, - csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, - cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, - cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, - el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, - is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, - kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, - kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, - rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, - rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, - smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, -ampex219w|ampex-219w|amp219w|Ampex 132 cols, - cols#132, lines#24, - bel=^G, cr=^M, cud1=^J, ind=^J, - is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, -# (ampex232: removed , no file and no --esr) -ampex232|ampex-232|Ampex Model 232, - am, - cols#80, lines#24, xmc#1, - cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, - flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, - invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, - kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, - kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, - kf9=^AI\r, khome=^^, use=adm+sgr, -# (ampex: removed , no file and no -- esr) -ampex232w|Ampex Model 232 / 132 columns, - cols#132, lines#24, - is2=\E\034Eg\El, use=ampex232, - -#### Ann Arbor (aa) # -# Ann Arbor made dream terminals for hackers -- large screen sizes and huge -# numbers of function keys. At least some used monitors in portrait mode, -# allowing up to 76-character screen heights! They were reachable at: +# lines 24 columns 132 # -# Ann Arbor Terminals -# 6175 Jackson Road -# Ann Arbor, MI 48103 -# (313)-663-8000 +wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, + rs2=\E`;$<70>, use=wy325, # -# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor -# can't be found on the Web; I fear they're long dead. R.I.P. +# lines 25 columns 80 # - - -# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. -# Highly modified 6/22 by Mike O'Brien. -# split out into several for the various screen sizes by dave-yost@rand -# Modifications made 3/82 by Mark Horton -# Modified by Tom Quarles at UCB for greater efficiency and more diversity -# status line moved to top of screen, removed 5/82 -# Some unknown person at SCO then hacked the init strings to make them more -# efficient. +wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325, # -# assumes the following setup: -# A menu: 0000 1010 0001 0000 -# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 -# C menu: 56 66 0 0 9600 0110 1100 -# D menu: 0110 1001 1 0 +# lines 25 columns 132 # -# Briefly, the settings are for the following modes: -# (values are for bit set/clear with * indicating our preference -# and the value used to test these termcaps) -# Note that many of these settings are irrelevent to the terminfo -# and are just set to the default mode of the terminal as shipped -# by the factory. +wy325-25w|wyse325-25w|wy325 132 columns, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # -# A menu: 0000 1010 0001 0000 -# Block/underline cursor* -# blinking/nonblinking cursor* -# key click/no key click* -# bell/no bell at column 72* +# lines 25 columns 132 vb # -# key pad is cursor control*/key pad is numeric -# return and line feed/return for key * -# repeat after .5 sec*/no repeat -# repeat at 25/15 chars per sec. * +wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, + bel@, use=wy325-w, + # -# hold data until pause pressed/process data unless pause pressed* -# slow scroll/no slow scroll* -# Hold in area/don't hold in area* -# functions keys have default*/function keys disabled on powerup +# lines 42 columns 80 # -# show/don't show position of cursor during page transmit* -# unused -# unused -# unused +wy325-42|wyse325-42|wyse-325 42 lines, + lh@, lines#42, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325, # -# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 -# Baud rate (9600*) +# lines 42 columns 132 # -# 2 bits of parity - 00=odd,01=even*,10=space,11=mark -# 1 stop bit*/2 stop bits -# parity error detection off*/on +wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, + lh@, lines#42, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # -# keyboard local/on line* -# half/full duplex* -# disable/do not disable keyboard after data transmission* +# lines 42 columns 132 vb # -# transmit entire page/stop transmission at cursor* -# transfer/do not transfer protected characters* -# transmit all characters/transmit only selected characters* -# transmit all selected areas/transmit only 1 selected area* +wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, + bel@, use=wy325-w, # -# transmit/do not transmit line separators to host* -# transmit/do not transmit page tab stops tabs to host* -# transmit/do not transmit column tab stop tabs to host* -# transmit/do not transmit graphics control (underline,inverse..)* +# lines 43 columns 80 # -# enable*/disable auto XON/XOFF control -# require/do not require receipt of a DC1 from host after each LF* -# pause key acts as a meta key/pause key is pause* -# unused +wy325-43|wyse325-43|wyse-325 43 lines, + lh@, lines#43, lw@, nlab@, + pln@, use=wy325, # -# unused -# unused -# unused -# unused +# lines 43 columns 132 # -# XON character (17*) -# XOFF character (19*) +wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # -# C menu: 56 66 0 0 9600 0110 1100 -# number of lines to print data on (printer) (56*) +# lines 43 columns 132 vb # -# number of lines on a sheet of paper (printer) (66*) +wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, + bel@, use=wy325-w, + +# Wyse 370 -- 24 line screen with status line. # -# left margin (printer) (0*) +# The terminal may have to be set for 8 data bits and 2 stop +# bits for the arrow keys to work. # -# number of pad chars on new line to printer (0*) +# If you change keyboards the terminal will send different +# escape sequences. +# The following definition is for the basic terminal without +# function keys. # -# printer baud rate (9600*) +# -> enter Tektronix 4010/4014 mode +# -> exit Tektronix 4010/4014 mode +# -> enter ASCII mode (from any ANSI mode) +# -> exit ASCII mode (goto native ANSI mode) +# -> enter Tek 4207 ANSI mode (from any ANSI mode) +# -> exit Tek 4207 mode (goto native ANSI mode) # -# printer parity: 00=odd,01=even*,10=space,11=mark -# printer stop bits: 2*/1 -# print/do not print guarded areas* +# Bug: The capability resets attributes. +wy370-nk|wyse 370 without function keys, + am, ccc, hs, mc5i, mir, msgr, xenl, xon, + colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, + dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, + dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, + el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, + flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8, + home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, + ind=\n$<2>, + initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e + %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3 + %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250} + %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%; + %{1}%+%+%+%dw, + invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, + is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, + is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, + mc5=\E[5i, + oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w + \E[66;5;51w\E[66;6;61w\E[66;7;64w, + op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, + rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, + rmkx=\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, + rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? + %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, + smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, + u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, + u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, # -# new line is: 01=LF,10=CR,11=CRLF* -# unused -# unused +# Function key set for the ASCII (wy-50 compatible) keyboard +# This is the default 370. # -# D menu: 0110 1001 1 0 -# LF is newline/LF is down one line, same column* -# wrap to preceding line if move left from col 1*/don't wrap -# wrap to next line if move right from col 80*/don't wrap -# backspace is/is not destructive* +wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, + kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, + knp=\E[U, kpp=\E[V, use=wy370-nk, # -# display*/ignore DEL character -# display will not/will scroll* -# page/column tab stops* -# erase everything*/erase unprotected only +# Function key set for the VT-320 (and wy85) compatible keyboard # -# editing extent: 0=display,1=line*,2=field,3=area +wy370-105k|Wyse 370 with 105 key keyboard, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, + use=wy370-nk, use=vt220+keypad, # -# unused +# Function key set for the PC compatible keyboard # +wy370-EPC|Wyse 370 with 102 key keyboard, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, +# +# Wyse 370 with visual bell. +wy370-vb|Wyse 370 with visible bell, + bel@, use=wy370, +# +# Wyse 370 in 132-column mode. +wy370-w|Wyse 370 in 132-column mode, + cols#132, wsl#132, + rs2=\E[35h\E[?3h$<70>, use=wy370, +# +# Wyse 370 in 132-column mode with visual bell. +wy370-wvb|Wyse 370 with visible bell 132-columns, + flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w, +wy370-rv|Wyse 370 reverse video, + rs3=\E[32h\E[?5h, use=wy370, +# +# Wyse 99gt Tektronix 4010/4014 emulator, +# +wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, + am, os, + cols#74, lines#35, + bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, + cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31} + %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004} + %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/ + %{31}%&%{64}%+%c\037, + cuu1=^K, ff=^L, + hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + \037, + home=^]7`x @\037, + hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + \037, + is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h, +# +# Wyse 160 Tektronix 4010/4014 emulator, +# +wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, + cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31} + %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004} + %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/ + %{31}%&%{64}%+%c\037, + home=^]8`g @\037, use=wy99gt-tek, +# +# Wyse 370 Tektronix 4010/4014 emulator, +# +wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, + am, os, + cols#80, lines#36, + bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, + cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/ + %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32} + %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, + cuu1=^K, ff=^L, + hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + \037, + home=^]8g @\037, + hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + \037, + is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K, + nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0, -annarbor4080|aa4080|ann arbor 4080, - OTbs, am, - cols#80, lines#40, - bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, - cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, - cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, - kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, - -# Strange Ann Arbor terminal from BRL -aas1901|Ann Arbor K4080 w/S1901 mod, - am, - cols#80, lines#40, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, - home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, - nel=^M^J, +# Vendor-supplied Wyse entries end here. -# If you're using the GNU termcap library, add -# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: -# to these capabilities. This is the nonstandard GNU termcap scrolling -# capability, arguments are: -# 1. Total number of lines on the screen. -# 2. Number of lines above desired scroll region. -# 3. Number of lines below (outside of) desired scroll region. -# 4. Total number of lines on the screen, the same as the first parameter. -# The generic Ann Arbor entry is the only one that uses this. -aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), - OTbs, am, km, mc5i, mir, xon, - cols#80, it#8, - bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, - clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, +# +#TITLE: TERMINFO ENTRY WY520 +#DATE: 8/5/93 +# The WY520 terminfo is based on the WY285 entry published on the WYSE +# BBS with the addition of more function keys and special keys. +# +# rs1 -> set personality +# rs2 -> set number of columns +# rs3 -> set number of lines +# is1 -> select the proper font +# is2 -> do the initialization +# is3 -> If this string is empty then rs3 gets sent. +# +# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard +# - The BS key is programmed to generate BS in smcup since +# is2 doesn't seem to work. +# - Remove and shift/Remove: delete a character +# - Insert : enter insert mode +# - Find : delete to end of file +# - Select : clear a line +# - F11, F12, F13: send default sequences (not ESC, BS, LF) +# - F14 : Home key +# - Bottom status line (host writable line) is used. +# - smkx,rmkx are removed because this would put the numeric +# keypad in Dec application mode which doesn't seem to work +# with SCO applications. +# +wy520|wyse520|wyse 520, + am, hs, km, mc5i, mir, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, - el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, - hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, - il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, - is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, - kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, - kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, - kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, - kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, - kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, - khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, - mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, - rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, - rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, - rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, - sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, - sgr0=\E[m, - smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, - smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, - vpa=\E[%p1%{1}%+%dd, - -aaa+rv|ann arbor ambassador in reverse video, - blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, - is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, - rs1=\E[H\E[7m\E[J$<156>, - sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, - sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, -# Ambassador with the DEC option, for partial vt100 compatibility. -aaa+dec|ann arbor ambassador in dec vt100 mode, - acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, - csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, - sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, - smacs=^O, -aaa-18|ann arbor ambassador/18 lines, - lines#18, - is2=\E7\E[60;0;0;18p\E8, - rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, - use=aaa+unk, -aaa-18-rv|ann arbor ambassador/18 lines+reverse video, - use=aaa+rv, use=aaa-18, -aaa-20|ann arbor ambassador/20 lines, - lines#20, - is2=\E7\E[60;0;0;20p\E8, - rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, - use=aaa+unk, -aaa-22|ann arbor ambassador/22 lines, - lines#22, - is2=\E7\E[60;0;0;22p\E8, - rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, - use=aaa+unk, -aaa-24|ann arbor ambassador/24 lines, - lines#24, - is2=\E7\E[60;0;0;24p\E8, - rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, - use=aaa+unk, -aaa-24-rv|ann arbor ambassador/24 lines+reverse video, - use=aaa+rv, use=aaa-24, -aaa-26|ann arbor ambassador/26 lines, - lines#26, - is2=\E7\E[60;0;0;26p\E8, - rmcup=\E[60;0;0;26p\E[26;1H\E[K, - smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, -aaa-28|ann arbor ambassador/28 lines, - lines#28, - is2=\E7\E[60;0;0;28p\E8, - rmcup=\E[60;0;0;28p\E[28;1H\E[K, - smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, -aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, - eslok, hs, - lines#29, - dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, - fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, - rmcup=\E[60;1;0;30p\E[29;1H\E[K, - smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, - tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, -aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, - use=aaa+rv, use=aaa-30-s, -aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, - rmcup=\E[60;1;0;30p\E[59;1H\E[K, - smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, -aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, - rmcup=\E[60;1;0;30p\E[59;1H\E[K, - smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, -aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, - lines#30, - is2=\E7\E[60;0;0;30p\E8, - rmcup=\E[60;0;0;30p\E[30;1H\E[K, - smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, -aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, - use=aaa+rv, use=aaa-30, -aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, - rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, - use=aaa-30, -aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, - rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, - use=aaa+rv, use=aaa-30, -aaa-36|ann arbor ambassador/36 lines, - lines#36, - is2=\E7\E[60;0;0;36p\E8, - rmcup=\E[60;0;0;36p\E[36;1H\E[K, - smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, -aaa-36-rv|ann arbor ambassador/36 lines+reverse video, - use=aaa+rv, use=aaa-36, -aaa-40|ann arbor ambassador/40 lines, - lines#40, - is2=\E7\E[60;0;0;40p\E8, - rmcup=\E[60;0;0;40p\E[40;1H\E[K, - smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, -aaa-40-rv|ann arbor ambassador/40 lines+reverse video, - use=aaa+rv, use=aaa-40, -aaa-48|ann arbor ambassador/48 lines, - lines#48, - is2=\E7\E[60;0;0;48p\E8, - rmcup=\E[60;0;0;48p\E[48;1H\E[K, - smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, -aaa-48-rv|ann arbor ambassador/48 lines+reverse video, - use=aaa+rv, use=aaa-48, -aaa-60-s|ann arbor ambassador/59 lines+status, - eslok, hs, - lines#59, - dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, - fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, - tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, -aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, - use=aaa+rv, use=aaa-60-s, -aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, - use=aaa+dec, use=aaa+rv, use=aaa-60-s, -aaa-60|ann arbor ambassador/60 lines, - lines#60, - is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, - use=aaa+unk, -aaa-60-rv|ann arbor ambassador/60 lines+reverse video, - use=aaa+rv, use=aaa-60, -aaa-db|ann arbor ambassador 30/destructive backspace, - OTbs@, - cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, - -guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, - lines#33, - flash=\E[>59h$<100>\E[>59l, - is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, - rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, -guru+rv|guru changes for reverse video, - flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, -guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, - use=guru+rv, use=guru-33, -guru+s|guru status line, - eslok, hs, - dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, - rmcup=\E[255;1p\E[255;1H\E[K, smcup=, - tsl=\E[>51h\E[1;%p1%dH\E[2K, -guru-nctxt|guru with no saved context, - smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, -guru-s|guru-33-s|ann arbor guru/33 lines+status, - lines#32, - is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, - smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, -guru-24|ann arbor guru 24 lines, - cols#80, lines#24, - is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, - use=guru+unk, -guru-44|ann arbor guru 44 lines, - cols#97, lines#44, - is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, - use=guru+unk, -guru-44-s|ann arbor guru/44 lines+status, - lines#43, - is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, - smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, -guru-76|guru with 76 lines by 89 cols, - cols#89, lines#76, - is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, - use=guru+unk, -guru-76-s|ann arbor guru/76 lines+status, - cols#89, lines#75, - is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, - smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, -guru-76-lp|guru-lp|guru with page bigger than line printer, - cols#134, lines#76, - is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, - use=guru+unk, -guru-76-w|guru 76 lines by 178 cols, - cols#178, lines#76, - is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, - use=guru+unk, -guru-76-w-s|ann arbor guru/76 lines+status+wide, - cols#178, lines#75, - is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, - smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, -guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, - cols#178, lines#76, - is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, - use=guru+unk, -aaa-rv-unk|ann arbor unknown type, - lh#0, lw#0, nlab#0, - blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, - is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, - rs1=\E[H\E[7m\E[J, - sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, - sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, - -#### Applied Digital Data Systems (adds) + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, + dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, + ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, + enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, + hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, + il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, + is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, + kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, + kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, + lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, + rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, + rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, + rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, + rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? + %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, + smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, + vpa=\E[%i%p1%dd, use=vt220+keypad, # -# ADDS itself is long gone. ADDS was bought by NCR, and the same group made -# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for -# terminals was merged again. Then AT&T sold the terminal business to -# SunRiver, which later changed its name to Boundless Technologies. The -# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there -# as of early 1995) are at: +# Wyse 520 with 24 data lines and status (terminal status) +wy520-24|wyse520-24|wyse 520 with 24 data lines, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, + use=wy520, # -# Boundless Technologies -# 100 Marcus Boulevard -# Hauppauge, NY 11788-3762 -# Vox: (800)-231-5445 -# Fax: (516)-342-7378 -# Web: http://boundless.com +# Wyse 520 with visual bell. +wy520-vb|wyse520-vb|wyse 520 with visible bell, + flash=\E[30h\E\,$<100/>\E[30l, use=wy520, # -# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". -# In 1995 Boundless acquired DEC's terminals business. +# Wyse 520 in 132-column mode. +wy520-w|wyse520-w|wyse 520 in 132-column mode, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, # - -# Regent: lowest common denominator, works on all regents. -# (regent: renamed ":bc:" to ":le:" -- esr) -regent|Adds Regent Series, - OTbs, am, - cols#80, lines#24, - bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, - home=\EY\s\s, ind=^J, ll=^A, -# Regent 100 has a bug where if computer sends escape when user is holding -# down shift key it gets confused, so we avoid escape. -regent100|Adds Regent 100, - xmc#1, - bel=^G, - cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, - kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, - kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, - lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, - sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, -regent20|Adds Regent 20, - bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, - use=regent, -regent25|Adds Regent 25, - bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, - use=regent20, -regent40|Adds Regent 40, - xmc#1, - bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, - kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, - kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, - lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, - smul=\E0`, use=regent25, -regent40+|Adds Regent 40+, - is2=\EB, use=regent40, -regent60|regent200|Adds Regent 60, - dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, - rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, - use=regent40+, -# From: Thu Jul 9 09:27:33 1981 -# (viewpoint: added , function key, and capabilities -- esr) -viewpoint|addsviewpoint|adds viewpoint, - OTbs, am, - cols#80, lines#24, - bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, - cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, - cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, - ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, - kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, - rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, -# Some viewpoints have bad ROMs that foo up on ^O -screwpoint|adds viewpoint with ^O bug, - cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, - -# From: Jay S. Rouman 5 Jul 92 -# The /// strings were added by ESR from specs. -# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, -# underline=01100000, rev=01010000, blink=01000010,dim=01000001, -# invis=01000100 and %c is the logical or of desired attributes. -# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. +# Wyse 520 in 132-column mode with visual bell. +wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, + flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w, # -# Update by TD - 2004: -# Adapted from -# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt # -# COMMANDS ASCII CODE +# Wyse 520 emulating a vt420 7 bit mode. +# The DEL key is programmed to generate BS in is2. +# With EPC keyboard. +# - 'End' key will clear till end of line on EPC keyboard +# - Shift/End : ignored. +# - Insert : enter insert mode. +# - Delete : delete a character (have to change interrupt character +# to CTRL-C: stty intr '^c') for it to work since the +# Delete key sends 7FH. +wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, + kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, + kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, + use=wy520, # -# Address, Absolute ESC,=,row,column -# Beep BEL -# Aux Port Enable ESC,@ -# Aux Port Disable ESC,A -# Backspace BS -# Cursor back BS -# Cursor down LF -# Cursor forward FF -# Cursor home RS -# Cursor up VT -# Cursor supress ETB -# Cursor enable CAN -# Erase to end of line ESC,T -# Erase to end of page ESC,Y -# Erase screen SUB -# Keyboard lock SI -# Keyboard unlock SO -# Read current cursor position ESC,? -# Set Attribute ESC,0,x (see below for values of x) -# Tag bit reset ESC,( -# Tag bit set ESC,) -# Transparent Print on ESC,3 -# Transparent Print off ESC,4 +# Wyse 520 with 24 data lines and status (terminal status) +# with EPC keyboard. +wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, + use=wy520-epc, +# +# Wyse 520 with visual bell. +wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, + flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc, # +# Wyse 520 in 132-column mode. +wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, # -# ATTRIBUTES +# Wyse 520 in 132-column mode with visual bell. +wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, + flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w, # -# Normal @ 0100 -# Half Intensity A 0101 -# Blinking B 0102 -# Half Intensity Blinking C 0103 -# Reverse Video P 0120 -# Reverse Video Half Intensity Q 0121 -# Reverse Video Blinking R 0122 -# Reverse Video Half Intensity -# Blinking S 0123 -# Underlined ` 0140 -# Underlined Half Intensity a 0141 -# Underlined Blinking b 0142 -# Underlined Half Intensity -# Blinking c 0143 -# Video suppress D 0104 -vp3a+|viewpoint3a+|adds viewpoint 3a+, - am, bw, - cols#80, it#8, lines#24, - blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, - cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), - ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E), - kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, - nel=^M^J, rev=\E0P\E), rmso=\E(, - sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, - sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), -vp60|viewpoint60|addsvp60|adds viewpoint60, - use=regent40, +# Wyse 520 in 80-column, 36 lines +wy520-36|wyse520-36|wyse 520 with 36 data lines, + hs@, + lines#36, + dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, + use=wy520, # -# adds viewpoint 90 - from cornell -# Note: emacs sends ei occasionally to insure the terminal is out of -# insert mode. This unfortunately puts the viewpoint90 IN insert -# mode. A hack to get around this is . (Also, -# - :ei=:im=: must be present in the termcap translation.) -# - indicates glitch that attributes stick to location -# - means it's safe to move in standout mode -# - : clears screen and visual attributes without affecting -# the status line -# Function key and label capabilities merged in from SCO. -vp90|viewpoint90|adds viewpoint 90, - OTbs, bw, msgr, xhp, - cols#80, lines#24, - clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, - cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, - dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, - ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, - kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, - kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, - kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, - lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, - lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, - sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, -# Note: if return acts weird on a980, check internal switch #2 -# on the top chip on the CONTROL pc board. -adds980|a980|adds consul 980, +# Wyse 520 in 80-column, 48 lines +wy520-48|wyse520-48|wyse 520 with 48 data lines, + hs@, + lines#48, + dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, + use=wy520, +# +# Wyse 520 in 132-column, 36 lines +wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, + use=wy520-36, +# +# Wyse 520 in 132-column, 48 lines +wy520-48w|wyse520-48w|wyse 520 with 48 data lines, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, + use=wy520-48, +# +# +# Wyse 520 in 80-column, 36 lines with EPC keyboard +wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, + hs@, + lines#36, + dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, + use=wy520-epc, +# +# Wyse 520 in 80-column, 48 lines with EPC keyboard +wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, + hs@, + lines#48, + dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, + use=wy520-epc, +# +# Wyse 520 in 132-column, 36 lines with EPC keyboard +wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, + use=wy520-36pc, +# +# Wyse 520 in 132-column, 48 lines with EPC keyboard +wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, + use=wy520-48pc, + +# From: John Gilmore +# (wyse-vp: removed , there's no such +# file and we don't know what is -- esr) +wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, OTbs, am, - cols#80, lines#24, - bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, - cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, - dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, - kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, - kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, + dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n, + is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F, + kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O, + rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, + smul=^N, -#### C. Itoh Electronics +wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, + is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, + use=wy75, + +# From: Eric Freudenthal +wy100q|Wyse 100 for Quotron, + OTbs, + cols#80, lines#24, xmc#1, + cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, + is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n, + kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, + +#### Kermit terminal emulations # -# As of 1995 these people no longer make terminals (they're still in the -# printer business). Their terminals were all clones of the DEC VT series. -# They're located in Orange County, CA. +# Obsolete Kermit versions may be listed in the section describing obsolete +# non-ANSI terminal emulators later in the file. # -# CIT 80 - vt-52 emulator, the termcap has been modified to remove -# the delay times and do an auto tab set rather than the indirect -# file used in vt100. -cit80|cit-80|citoh 80, - OTbs, am, - cols#80, lines#24, - clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C, - cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, - ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, - kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, -# From: Tim Wood Fri Sep 27 09:39:12 PDT 1985 -# (cit101: added / based on init string, merged this with c101 -- esr) -cit101|citc|C.itoh fast vt100, - OTbs, am, xenl, +# KERMIT standard all versions. +# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. +# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) +# From: greg small 9-25-84 +kermit|standard kermit, + OTbs, cols#80, lines#24, - bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U, - dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, - flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, - is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, - smul=\E[4m, -# CIE Terminals CIT-101e from Geoff Kuenning via BRL -# The following termcap entry was created from the Callan cd100 entry. The -# last two lines (with the capabilities in caps) are used by RM-cobol to allow -# full selection of combinations of reverse video, underline, and blink. -# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ -# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ -# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) -cit101e|C. Itoh CIT-101e, - OTbs, OTpt, am, mir, msgr, - cols#80, it#8, lines#24, - acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, - cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, - cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J, - el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, - kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, - rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, - smkx=\E=, smso=\E[7m, smul=\E[4m, -# From: David S. Lawyer, June 1997: -# The CIT 101-e was made in Japan in 1983-4 and imported by CIE -# Terminals in Irvine, CA. It was part of CITOH Electronics. In the -# late 1980's CIT Terminals went out of business. -# There is no need to use the initialization string is=... (by invoking -# tset or setterm etc.) provided that the terminal has been manually set -# up (and the setup saved with ^S) to be compatible with this termcap. To be -# compatible it should be in ANSI mode (not VT52). A set-up that -# works is to set all the manually setable stuff to factory defaults -# by pressing ^D in set-up mode. Then increse the brighness with the -# up-arrow key since the factory default will likely be dim on an old -# terminal. Then change any options you want (provided that they are -# compatible with the termcap). For my terminal I set: Screen -# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: -# on. I also set up mine for parity (but you may not need it). Then -# save the setup with ^S. -# (cit101e-rv: added empty to suppress a tic warning. --esr) -cit101e-rv|Citoh CIT-101e (sets reverse video), - am, eo, mir, msgr, xenl, xon, + clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, +kermit-am|standard kermit plus auto-margin, + am, + is2=K1 Standard Kermit plus Automatic Margins\n, + use=kermit, +# IBMPC Kermit 1.2. +# Bugs: , : do not work except at beginning of line! does +# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of +# line). +# From: greg small 8-30-84 +pckermit|pckermit12|UCB IBMPC Kermit 1.2, + am, + lines#25, + clear=\EH\EJ, ed@, el@, + is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, +# IBMPC Kermit 1.20 +# Cannot use line 25, now acts funny like ansi special scrolling region. +# Initialization must escape from that region by cursor position to line 24. +# Cannot use character insert because 1.20 goes crazy if insert at col 80. +# Does not use :am: because autowrap is lost when kermit dropped and restarted. +# From: greg small 12-19-84 +pckermit120|UCB IBMPC Kermit 1.20, + it#8, lines#24, + cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, + il1=\EL, + is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84 + \n, + rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, +# MS-DOS Kermit 2.27 for the IBMPC +# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. +# Cannot use line 25, now acts funny like ansi special scrolling region. +# Initialization must escape from that region by cursor position to line 24. +# Does not use am: because autowrap is lost when kermit dropped and restarted. +# Reverse video for standout like H19. +# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) +# From: greg small 3-17-85 +msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, + OTbs, am@, cols#80, it#8, lines#24, - OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, - civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, + clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, + home=\EH, ht=^I, il1=\EL, + is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe + \sIBMPC\s3-17-85\n, + kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, + rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, +# MS-DOS Kermit 2.27 with automatic margins +# From: greg small 3-17-85 +msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, + am, + cvvis=\EO\Eq\EG\EvK5, + is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic + \smargins\s3-17-85\n, + use=msk227, +# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC +# Automatic margins now default. Use ansi for highlights. +# Define function keys. +# (msk22714: removed obsolete ":kn#10:" -- esr) +# From: greg small 3-17-85 +msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, + am, + bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, + is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14 + \sIBM\sPC\s3-17-85\n, + kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, + kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, +# This was designed for a VT320 emulator, but it is probably a good start +# at support for the VT320 itself. +# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. +# (vt320-k3: I added / based on the init string -- esr) +vt320-k3|MS-Kermit 3.00's vt320 emulation, + am, eslok, hs, km, mir, msgr, xenl, + cols#80, it#8, lines#49, pb#9600, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, - home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, - is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, - kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, - rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, - rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, - sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, - smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, - u7=\E[6n, u8=\E[?6c, u9=\E[c, -cit101e-n|CIT-101e w/o am, - am@, - cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, - use=cit101e, -cit101e-132|CIT-101e with 132 cols, - cols#132, - kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, -cit101e-n132|CIT-101e with 132 cols w/o am, - am@, - cols#132, - cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, - use=cit101e, -# CIE Terminals CIT-500 from BRL -# The following SET-UP modes are assumed for normal operation: -# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF -# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES -# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF -# Other SET-UP modes may be set for operator convenience or communication -# requirements. -# Hardware tabs are assumed to be set every 8 columns; they can be set up -# by the "reset", "tset", or "tabs" utilities. No delays are specified; use -# "stty ixon -ixany" to enable DC3/DC1 flow control! -# (cit500: I added / based on the init string -- esr) -cit500|CIE Terminals CIT-500, - OTbs, OTpt, mir, msgr, xon, - OTkn#10, cols#80, it#8, lines#64, vt#3, - acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, - clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, - cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, - il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, - kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, - ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, - kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, - khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, - lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, - lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, - ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, - rmso=\E[m, rmul=\E[m, - rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, - sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[ + ?5l, + fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, + is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h + \E[4i\E[?4i\E[m\E[r\E[2$~, + sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, +# From: Joseph Gil 13 Dec 1991 +# ACS capabilities from Philippe De Muyter 30 May 1996 +# (I removed a bogus boolean :mo: and added , , -- esr) +vt320-k311|dec vt320 series as defined by kermit 3.11, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, + flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, + ind=\ED, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, -# C. Itoh printers begin here -citoh|ci8510|8510|c.itoh 8510a, - cols#80, it#8, - bold=\E!, cub1@, - is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., - rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, - smul=\EX, use=lpr, -citoh-pica|citoh in pica, - is1=\EN, use=citoh, -citoh-elite|citoh in elite, - cols#96, - is1=\EE, - is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., - use=citoh, -citoh-comp|citoh in compressed, - cols#136, - is1=\EQ, - is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., - use=citoh, -# citoh has infinite cols because we don't want lp ever inserting \n\t**. -citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, - cols#32767, - is1=\EP, use=citoh, -citoh-6lpi|citoh in 6 lines per inch mode, - is3=\EA, use=citoh, -citoh-8lpi|citoh in 8 lines per inch mode, - lines#88, - is3=\EB, use=citoh, - -#### Control Data (cdc) +######## NON-ANSI TERMINAL EMULATIONS # -cdc456|cdc 456 terminal, - OTbs, am, - cols#80, lines#24, - bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, - el=^V, home=^Y, il1=\EL, ind=^J, - -# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) -cdc721|CDC Viking, - OTbs, am, - cols#80, lines#24, - clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, - cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, - kcuu1=^W, khome=^Y, -cdc721ll|CDC Vikingll, - OTbs, am, - cols#132, lines#24, - clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, - cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, - kcuu1=^W, khome=^Y, -# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out -cdc752|CDC 752, - OTbs, am, bw, xhp, - cols#80, lines#24, - bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, - cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, - home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, -# CDC 756 -# The following switch/key settings are assumed for normal operation: -# 96 chars SCROLL FULL duplex not BLOCK -# Other switches may be set according to communication requirements. -# Insert/delete-character cannot be used, as the whole display is affected. -# "so" & "se" are commented out until jove handles "sg" correctly. -cdc756|CDC 756, - OTbs, am, bw, - OTkn#10, cols#80, lines#24, - bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, - cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, - dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, - kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, - kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, - kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, - khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, - lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, - rs1=\031\030\002\003\017, -# -# CDC 721 from Robert Viduya, Ga. Tech. via BRL. +#### Avatar # -# Part of the long initialization string defines the "DOWN" key to the left -# of the tab key to send an ESC. The real ESC key is positioned way out -# in right field. +# These entries attempt to describe Avatar, a terminal emulation used with +# MS-DOS bulletin-board systems. It was designed to give ANSI-like +# capabilities, but with cheaper (shorter) control sequences. Messy design, +# excessively dependent on PC idiosyncrasies, but apparently rather popular +# in the BBS world. # -# The termcap won't work in 132 column mode due to the way it it moves the -# cursor. Termcap doesn't have the capability (as far as I could tell) to -# handle the 721 in 132 column mode. +# No color support. Avatar doesn't fit either of the Tektronix or HP color +# models that terminfo knows about. An Avatar color attribute is the +# low 7 bits of the IBM-PC display-memory attribute. Bletch. # -# (cdc721: changed :ri: to :sr: -- esr) -cdc721-esc|Control Data 721, - OTbs, OTpt, am, bw, msgr, xon, - OTkn#10, cols#80, it#8, lines#30, - bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, - cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, - dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, - ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, - is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, - kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, - kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, - kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, - ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], - sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, - smso=^^D, smul=^\, tbc=^^^RY, - -#### Getronics +# I wrote these entries while looking at the Avatar spec. I don't have +# the facilities to test them. Let me know if they work, or don't. # -# Getronics is a Dutch electronics company that at one time was called -# `Geveke' and made async terminals; but (according to the company itself!) -# they've lost all their documentation on the command set. The hardware -# documentation suggests the terminals were actually manufactured by a -# Taiwanese electronics company named Cal-Comp. There are known -# to have been at least two models, the 33 and the 50. +# Avatar escapes not used by these entries (because maybe you're smarter +# and more motivated than I am and can figure out how to wrap terminfo +# around some of them, and because they are weird enough to be funny): +# level 0: +# ^L -- clear window/reset current attribute to default +# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: # - -# The 50 seems to be a top end vt220 clone, with the addition of a higher -# screen resolution, a larger screen, at least 1 page of memory above and -# below the screen, apparently pages of memory right and left of the screen -# which can be panned, and about 75 function keys (15 function keys x normal, -# shift, control, func A, func B). It also has more setup possibilities than -# the vt220. The monitor case is dated November 1978 and the keyboard case is -# May 1982. +# bit: 6 5 4 3 2 1 0 +# | | | | | +# +---+---+ | +---+---+ +# | | | +# | | foreground color +# | foreground intensity +# background color +# level 0+: +# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines +# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines +# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 +# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 +# (^V^L and ^V^M set the current attribute as a side-effect.) +# ^V ^Y [...] -- repeat pattern. specifies the number of bytes +# in the pattern, the number of times the pattern +# should be repeated. If either value is 0, no-op. +# The pattern can contain Avatar console codes, +# including other ^V ^Y patterns. +# level 1: +# ^V^O -- clockwise mode on; turn print direction right each time you +# hit a window edge (yes, really). Turned off by CR +# ^V^P -- no-op +# ^V^Q%c -- query the driver +# ^V^R -- driver reset +# ^V^S -- Sound tone (PC-specific) +# ^V^T -- change highlight at current cursor position to %c +# ^V^U%p1%c%p2%c -- highlight window with attribute +# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c +# -- define window # -# The vt100 emulation works as is. The entry below describes the rather -# non-conformant (but more featureful) ANSI mode. +# From: Eric S. Raymond 1 Nov 1995 +# (The ///// capabilities exist only to +# tell ncurses that the corresponding highlights exist; it should use , +# which is the only method that will actually work for multiple highlights.) # -# From: Stephen Peterson , 27 May 1995 -visa50|geveke visa 50 terminal in ansi 80 character mode, - bw, mir, msgr, - cols#80, lines#25, - acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, - blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, - dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, - hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, - il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, - is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, - ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, - kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, - kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, - kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, - kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, - lf3=A insert line, lf4=A delete line, lf5=A clear, - lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, - lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, - rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, - rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, - smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, - vpa=\E[%i%p1%dd, +# Update by TD - 2004: half of this was inconsistent. Found documentation +# and repaired most of the damage. sgr0 is probably incorrect, but the +# available documentation gives no clues for a workable string. +avatar0|avatar terminal emulator level 0, + am, bce, msgr, + cols#80, it#8, lines#25, + blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D, + cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, + ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, + rmacs@, rs2=^L, + sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%? + %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t + %{16}%|%;%;%c%;%?%p4%t\026\002%;, + sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, + use=klone+acs, +# From: Eric S. Raymond 1 Nov 1995 +avatar0+|avatar terminal emulator level 0+, + dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, +# From: Eric S. Raymond 1 Nov 1995 +avatar|avatar1|avatar terminal emulator level 1, + civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, + rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, -#### Human Designed Systems (Concept) -# -# Human Designed Systems -# 400 Fehley Drive -# King of Prussia, PA 19406 -# Vox: (610)-277-8300 -# Fax: (610)-275-5739 -# Net: support@hds.com -# -# John Martin is their termcap expert. They're mostly out of -# the character-terminal business now (1995) and making X terminals. In -# particular, the whole `Concept' line described here was discontinued long -# ago. +#### RBcomm # +# RBComm is a lean and mean terminal emulator written by the Interrupt List +# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early +# '90s), especially in the BBS world, and still has some loyal users due to +# its very small memory footprint and to a cute macro language. +rbcomm|IBM PC with RBcomm and EMACS keybindings, + am, bw, mir, msgr, xenl, + cols#80, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^C, cuf1=^B, + cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, + dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, + il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, + is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, + kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED, + rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, + rmir=^], rmkx=\E>, rmso=^U, rmul=^U, + rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, + smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, +rbcomm-nam|IBM PC with RBcomm without autowrap, + am@, + bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, + is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, + kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm, +rbcomm-w|IBM PC with RBcomm in 132 column mode, + cols#132, + bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, + is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, + kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm, -# From: Sat Jun 27 07:41:20 1981 -# Extensive changes to c108 by arpavax:eric Feb 1982 -# Some unknown person at SCO then translated it to terminfo. -# -# There seem to be a number of different versions of the C108 PROMS -# (with bug fixes in its Z-80 program). +######## LCD DISPLAYS # -# The first one that we had would lock out the keyboard of you -# sent lots of short lines (like /usr/dict/words) at 9600 baud. -# Try that on your C108 and see if it sends a ^S when you type it. -# If so, you have an old version of the PROMs. + +#### Matrix Orbital +# from: Eric Z. Ayers (eric@ale.org) # -# You should configure the C108 to send ^S/^Q before running this. -# It is much faster (at 9600 baud) than the c100 because the delays -# are not fixed. -# new status line display entries for c108-8p: -# - init str #3 - setup term for status display - -# set programmer mode, select window 2, define window at last -# line of memory, set bkgnd stat mesg there, select window 0. +# Matrix Orbital 20x4 LCD display +# Command Character is 0xFE (decimal 254, octal 376) # -# - to status line - select window 2, home cursor, erase to -# end-of-window, 1/2 bright on, goto(line#0, col#?) +# On this device, cursor addressability isn't possible. The LCD expects: +# 0xfe G +# for cup: %p1 == row and %p2 is column # -# - from status line - 1/2 bright off, select window 0 +# This line: +# cup=\376G%p2%c%p1%c +# LOOKS like it will work, but sometimes only one of the two numbers is sent. +# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. # -# - disable status display - set bkgnd status mesg with -# illegal window # +# Alas, there is no cursor upline capability on this display. # -# There are probably more function keys that should be added but -# I don't know what they are. +# These entries add some 'sanity stuff' to the clear function. That is, it +# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, +# and turns off the cursor blinking and stuff like that. # -# No delays needed on c108 because of ^S/^Q handshaking +# NOTE: calling 'beep' turns on the backlight (bell) +# NOTE: calling 'flash' turns it on and back off (visual bell) # -c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, - is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, - rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, -c108-4p|concept108-4p|concept 108 w/4 pages, - OTbs, eslok, hs, xon, - pb@, - acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, - cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, - cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, - ind=^J, is1=\EK\E!\E F, - is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, - rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, - smcup=\EU\Ev 8p\Ep\r\E\025, - tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, -c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, - rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, - use=c108-rv-4p, -c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, - flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, - use=c108-4p, -c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, - cols#132, - is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, - smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, +MtxOrb|Generic Matrix Orbital LCD display, + bel=\376B\001, clear=\376X\376C\376R\376K\376T, + cnorm=\376K\376T, cub1=\376L, cuf1=\376M, + flash=\376B\001$<200>\376F, home=\376H, +MtxOrb204|20x4 Matrix Orbital LCD display, + cols#20, lines#4, use=MtxOrb, +MtxOrb162|16x2 Matrix Orbital LCD display, + cols#16, lines#2, use=MtxOrb, +# The end -# Concept 100: -# These have only window relative cursor addressing, not screen -# relative. To get it to work right here, smcup/rmcup (which -# were invented for the concept) lock you into a one page -# window for screen style programs. -# -# To get out of the one page window, we use a clever trick: -# we set the window size to zero ("\Ev " in rmcup) which the -# terminal recognizes as an error and resets the window to all -# of memory. -# -# This trick works on c100 but does not on c108, sigh. +######## OLDER TERMINAL TYPES # -# Some tty drivers use cr3 for concept, others use nl3, hence -# the delays on cr and ind below. This padding is only needed at -# 9600 baud and up. One or the other is commented out depending on -# local conventions. +# This section is devoted to older commercial terminal brands that are now +# discontinued, but known to be still in use or represented by emulations. # -# 2 ms padding on isn't always enough. 6 works fine. Maybe -# less than 6 but more than 2 will work. + +#### AT&T (att, tty) # -# Note: can't use function keys f7-f10 because they are -# indistinguishable from arrow keys (!), also, del char and -# clear eol use xon/xoff so they probably won't work very well. +# This section also includes Teletype-branded VDTs. # -# Also note that we don't define insrt/del char/delline/eop/send -# because they don't transmit unless we reset them - I figured -# it was a bad idea to clobber their definitions. +# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now +# Boundless Technologies); for details, see the header comment on the ADDS +# section. # -# The sequence changes the escape character to ^^ so that -# escapes will be passed through to the printer. Only trouble -# is that ^^ won't be - ^^ was chosen to be unlikely. -# Unfortunately, if you're sending raster bits through to be -# plotted, any character you choose will be likely, so we lose. +# These are AT&T's official terminfo entries. All-caps aliases have been +# removed. # -# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) -# cannot be # in is2 because it will hang a c100 with no printer -# if sent twice. -c100|concept100|concept|c104|c100-4p|hds concept 100, - OTbs, am, eo, mir, ul, xenl, - cols#80, lines#24, pb#9600, vt#8, - bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, - cub1=^H, cud1=^J, cuf1=\E=, - cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, - dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, - ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, - ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, - is1=\EK, - is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, - is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, - kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, - kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, - kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, - khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., - kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, - mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, - rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, - rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, - rmso=\Ed, rmul=\Eg, sgr0=\EN@, - smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, - smso=\ED, smul=\EG, -c100-rv|c100-rv-4p|concept100-rv|c100 rev video, - cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, - smso=\EE, use=c100, -oc100|oconcept|c100-1p|old 1 page concept 100, - in, - is3@, use=c100, +att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, + am, eo, mir, msgr, xon, + cols#80, it#8, lines#24, + bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, + kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, + kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, + kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, + kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, + rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, + smso=\E[7m, +att2350|AT&T 2350 Video Information Terminal 80 column mode, + mc0@, mc4@, mc5@, use=att2300, + +# Must setup RETURN KEY - CR, REC'VD LF - INDEX. +# Seems upward compatible with vt100, plus ins/del line/char. +# On sgr, the protection parameter is ignored. +# No check is made to make sure that only 3 parameters are output. +# standout= reverse + half-intensity = 3 | 5. +# bold= reverse + underline = 2 | 3. +# note that half-bright blinking doesn't look different from normal blinking. +# NOTE:you must program the function keys first, label second! +# (att4410: a BSD entry has been seen with the following capabilities: +# , , , , , +# , , , -- esr) +att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, + am, hs, mir, msgr, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz + z{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, + dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, + ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0, + is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s + \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s + \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s + \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q + \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s + \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s + \s\s\s\EOW, + kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, + kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, + ll=\E[24H, nel=\r\n, + pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s + \s%p2%s, + pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, + sc=\E7, + sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%p1%{1}%+%dH, + +att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, + cols#132, wsl#132, + is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, + +att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, + OTbs, + pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, + use=att5410v1, + +att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, + cols#132, wsl#132, + is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, + +# 5410 in terms of a vt100 +# (v5410: added / based on init string -- esr) +v5410|att5410 in terms of a vt100, + am, mir, msgr, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\n, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, + il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, + rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, + rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 + %;m%?%p9%t\016%e\017%;$<2>, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, + use=vt100+fnkeys, -# From: Walter Skorski , 16-oct-1996. -# Lots of notes, originally inline, but ncurses doesn't grok that. -# -# am: not available in power on mode, but turned on with \E[=107;207h in -# is2=. Also, \E=124l in is2= could have been used to prevent needing -# to specify xenl:, but that would have rendered the last space on the -# last line useless. -# bw: Not available in power on mode, but turned on with \E[=107;207h in -# is2=. -# clear: Could be done with \E[2J alone, except that vi (and probably most -# other programs) assume that this also homes the cursor. -# dsl: Go to window 2, go to the beginning of the line, use a line feed to -# scroll the window, and go back to window 1. -# is2: the string may cause a warning to be issued by tic that it -# found a very long line and that it suspects that a comma is missing -# somewhere. This warning can be ignored (unless it comes up more than -# once). The initialization string contains the following commands: -# -# [Setup mode items changed from factory defaults:] -# \E)0 set alternate character set to -# graphics -# ^O set character set to default -# [In case it wasn't] -# \E[m turn off all attributes -# [In case they weren't off] -# \E[=107; cursor wrap and -# 207h character wrap on -# \E[90;3u set Fkey definitions to "transmit" -# defaults -# \E[92;3u set cursor key definitions to -# "transmit" defaults -# \E[43;1u set shift F13 to transmit... -# \177\E$P\177 -# \E[44;1u set shift F14 to transmit... -# \177\E$Q\177 -# \E[45;1u set shift F15 to transmit... -# \177\E$R\177 -# \E[46;1u set shift F16 to transmit... -# \177\E$S\177 -# \E[200;1u set shift up to transmit... -# \177\E$A\177 -# \E[201;1u set shift down to transmit... -# \177\E$B\177 -# \E[202;1u set shift right to transmit... -# \177\E$C\177 -# \E[203;1u set shift left to transmit... -# \177\E$D\177 -# \E[204;1u set shift home to transmit... -# \177\E$H\177 -# \E[212;1u set backtab to transmit... -# \177\E$I\177 -# \E[213;1u set shift backspace to transmit... -# \177\E$^H\177 -# \E[214;1u set shift del to transmit... -# "\E$\177" -# [Necessary items not mentioned in setup mode:] -# \E[2!w move to window 2 -# \E[25;25w define window as line 25 of memory -# \E[!w move to window 1 -# \E[2*w show current line of window 2 as -# status line -# \E[2+x set meta key to use high bit -# \E[;3+} move underline to bottom of character -# -# All Fkeys are set to their default transmit definitions with \E[90;3u -# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty -# setting MUST be redefined or deactivated, because the default is -# contained in almost all of this terminal's Fkey strings! If for some -# reason "quit" cannot be altered, the Fkeys can, but it would be -# necessary to change ^| to ^] in all of these definitions, and add -# \E[2;029!t to is2. -# lines: is set to 24 because this terminal refuses to treat the 25th -# line normally. -# ll: Not available in power on mode, but turned on with \E[=107;207h in -# is2=. -# lm: Pointless, given that this definition locks a single screen of -# memory into view, but what the hey... -# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any -# other attributes alone), but some programs expect this to turn off -# everything. -# rmul: Could use \E[4!{ to turn off only underline (leaving any other -# attributes alone), but some programs expect this to turn off -# everything. -# sgr: Attributes are set on this terminal with the string \E[ followed by -# a list of attribute code numbers (in decimal, separated by -# semicolons), followed by the character m. The attribute code -# numbers are: -# 1 for bold; -# 2 for dim (which is ignored in power on mode); -# 4 for underline; -# 5 for blinking; -# 7 for inverse; -# 8 for not displayable; and -# =99 for protected (except that there are strange side -# effects to protected characters which make them inadvisable). -# The mapping of terminfo parameters to attributes is as follows: -# %p1 (standout) = bold and inverse together; -# %p2 (underline) = underline; -# %p3 (reverse) = inverse; -# %p4 (blink) = blinking; -# %p5 (dim) is ignored; -# %p6 (bold) = bold; -# %p7 (invisible) = not displayable; -# %p8 (protected) is ignored; and -# %p9 (alt char set) = alt char set. -# The code to do this is: -# \E[0 OUTPUT \E[0 -# %?%p1%p6%O IF (standout; bold) OR -# %t;1 THEN OUTPUT ;1 -# %; ENDIF -# %?%p2 IF underline -# %t;4 THEN OUTPUT ;4 -# %; ENDIF -# %?%p4 IF blink -# %t;5 THEN OUTPUT ;5 -# %; ENDIF -# %?%p1%p3%O IF (standout; reverse) OR -# %t;7 THEN OUTPUT ;7 -# %; ENDIF -# %?%p7 IF invisible -# %t;8 THEN OUTPUT ;8 -# %; ENDIF -# m OUTPUT m -# %?%p9 IF altcharset -# %t^N THEN OUTPUT ^N -# %e^O ELSE OUTPUT ^O -# %; ENDIF -# sgr0: Everything is turned off (including alternate character set), since -# there is no way of knowing what it is that the program wants turned -# off. -# smul: The "underline" attribute is reconfigurable to an overline or -# strikethru, or (as done with \E[;3+} in is2=), to a line at the true -# bottom of the character cell. This was done to allow for more readable -# underlined characters, and to be able to distinguish between an -# underlined space, an underscore, and an underlined underscore. -# xenl: Terminal can be configured to not need this, but this "glitch" -# behavior is actually preferable with autowrap terminals. -# -# Parameters kf31= thru kf53= actually contain the strings sent by the shifted -# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 -# string modifies the 'O' in kf43 to kf46 to a '$'. -# -# kcbt was originally ^I but redefined in is2=. -# kHOM was \E[H originally but redefined in is2=, as were a number of -# other keys. -# kDC was originally \177 but redefined in is2=. -# -# kbs: Shift was also ^H originally but redefined as \E$^H in is2=. -# tsl: Go to window 2, then do an hpa=. -# -#------- flash=\E[8;3!}^G\E[3;3!} -#------- flash=\E[?5h$<100>\E[?5l -# There are two ways to flash the screen, both of which have their drawbacks. -# The first is to set the bell mode to video, transmit a bell character, and -# set the bell mode back - but to what? There is no way of knowing what the -# user's old bell setting was before we messed with it. Worse, the command to -# set the bell mode also sets the key click volume, and there is no way to say -# "leave that alone", or to know what it's set to, either. -# The second way to do a flash is to set the screen to inverse video, pad for a -# tenth of a second, and set it back - but like before, there's no way to know -# that the screen wasn't ALREADY in inverse video, or that the user may prefer -# it that way. The point is moot anyway, since vi (and probably other -# programs) assume that by defining flash=, you want the computer to use it -# INSTEAD of bel=, rather than as a secondary type of signal. # -#------- cvvis=\E[+{ -# The is the power on setting, which is also as visible as the cursor -# gets. -#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw -# Windowing is possible, but not defined here because it is also used to -# emulate status line functions. Allowing a program to set a window could -# clobber the status line or render it unusable. There is additional memory, -# but screen scroll functions are destructive and do not make use of it. +# Teletype Model 5420 -- A souped up 5410, with multiple windows, +# even! the 5420 has three modes: scroll, window or page mode +# this terminfo should work in scroll or window mode, but doesn't +# take advantage of any of the differences between them. # -#------- dim= Not available in power on mode. -# You have a choice of defining low intensity characters as "half bright" and -# high intensity as "normal", or defining low as "normal" and high as "bold". -# No matter which you choose, only one of either "half bright" or "bold" is -# available at any time, so taking the time to override the default is -# pointless. -# -#------- prot=\E[=0;99m -# Not defined, because it appears to have some strange side effects. -#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; -#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; -#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; -# Available, but making them available to programs is inadvisable. -# The code to do this is: -# %?%p1%{24}%< IF ((key; 24) <; -# %p1%{30}%> ((key; 30) >; -# %p1%{54}%< (key; 54) < -# %A ) AND -# %O ) OR -# [that is, "IF key < 24 OR (key > 30 AND key < 54)",] -# %t\E[ THEN OUTPUT \E[ -# %p1%d OUTPUT (key) as decimal -# [next line applies to pfx only] -# ;1 OUTPUT ;1 -# u OUTPUT u -# \177 OUTPUT \177 -# %p2%s OUTPUT (string) as string -# \177 OUTPUT \177 -# [DEL chosen as delimiter, but could be any character] -# [implied: ELSE do nothing] -# %; ENDIF -# -#------- rs2= -# Not defined since anything it might do could be done faster and easier with -# either Meta-Shift-Reset or the main power switch. -# -#------- smkx=\E[1!z -#------- rmkx=\E[!z -# These sequences apply to the cursor and setup keys only, not to the -# numeric keypad. But it doesn't matter anyway, since making these -# available to programs is inadvisable. -# For the key definitions below, all sequences beginning with \E$ are -# custom and programmed into the terminal via is2. \E$ also has no -# meaning to any other terminal. -# -#------- cmdch=\E[;%p1%d!t -# Available, but making it available to programs is inadvisable. -#------- smxon=\E[1*q -# Available, but making it available to programs is inadvisable. -# Terminal will send XON/XOFF on buffer overflow. -#------- rmxon=\E[*q -# Available, but making it available to programs is inadvisable. -# Terminal will not notify on buffer overflow. -#------- smm=\E[2+x -#------- rmm=\E[+x -# Available, but making them available to programs is inadvisable. -# -# Printing: -# It's not made clear in the manuals, but based on other ansi/vt type -# terminals, it's a good guess that this terminal is capable of both -# "transparent print" (which doesn't copy data to the screen, and -# therefore needs mc5i: specified to say so) and "auxilliary print" -# (which does duplicate printed data on the screen, in which case mc4= -# and mc5= should use the \E[?4i and \E[?5i strings instead). +# Has memory below (2 lines!) +# 3 pages of memory (plus some spare) +# The 5410 sequences for , , ,
, , , , +# , would work for these, but these work in both scroll and window +# mode... Unset insert character so insert mode works +# sets 80 column mode, +# escape sequence: +# 1) turn off all fonts +# 2) function keys off, keyboard lock off, control display off, +# insert mode off, erasure mode off, +# 3) full duplex, monitor mode off, send graphics off, nl on lf off +# 4) reset origin mode +# 5) set line wraparound +# 6) exit erasure mode, positional attribute mode, and erasure extent mode +# 7) clear margins +# 8) program ENTER to transmit ^J, +# We use \212 to program the ^J because a bare ^J will get translated by +# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. +# 1 2 3 4 5 6 7 8 +# set screen color to black, +# No representation in terminfo for the delete word key: kdw1=\Ed +# Key capabilities assume the power-up send sequence... +# This is not strictly necessary, but it helps maximize +# memory usefulness: , +# Alternate sgr0: , +# Alternate sgr: , +# smkx programs the SYS PF keys to send a set sequence. +# It also sets up labels f1, f2, ..., f8, and sends edit keys. +# This string causes them to send the strings - +# when pressed in SYS PF mode. +# (att4415: I added / based on the init string -- esr) +att4415|tty5420|att5420|AT&T 4415/5420 80 cols, + OTbs, db, mir, xon, + lh#2, lm#78, lw#8, nlab#8, wsl#55, + cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, + cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, + cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, + dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, + flash=\E[?5h$<200>\E[?5l, home=\E[x, + hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, + il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, + is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h + \E[4i\Ex\E[21;1j\212, + is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, + kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, + kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, + kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, + kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, + mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, + pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, + rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, + sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, + smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, + tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, + use=att4410, -hds200|Human Designed Systems HDS200, - am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, lm#0, - acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, - blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, - clear=\E[H\E[J, cnorm=\E[+{, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, - cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, - dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, - fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, - ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, - invis=\E[0;8m, - is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, - kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, - kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, - kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, - kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, - kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, - kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, - kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, - kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, - kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, - kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, - kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, - kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, - kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, - kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, - mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, - rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, - rmul=\E[m\017, sc=\E7, - sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, - smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, - vpa=\E[%i%p1%dd, +att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, + cols#132, lm#54, wsl#97, + is1=\E[?3h$<100>, use=att4415, -# through included to specify padding needed in raw mode. -# (avt-ns: added empty to suppress a tic warning --esr) -avt-ns|concept avt no status line, - OTbs, am, eo, mir, ul, xenl, xon, - cols#80, it#8, lines#24, lm#192, - acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, - clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, - csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, - cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, - cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, - dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, - hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, - ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, - invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, - is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, - kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, - kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, - mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, - pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, - prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, - ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, - rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, - sc=\E7, - sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, - sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r, - smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, - tbc=\E[2g, vpa=\E[%p1%{1}%+%dd, -avt-rv-ns|concept avt in reverse video mode/no status line, - flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, - use=avt-ns, -avt-w-ns|concept avt in 132 column mode/no status line, - is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, - use=avt-ns, -avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, - flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, - smcup=\E[H\E[1;24;1;132w, use=avt-ns, +att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, + flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, -# Concept AVT with status line. We get the status line using the -# "Background status line" feature of the terminal. We swipe the -# first line of memory in window 2 for the status line, keeping -# 191 lines of memory and 24 screen lines for regular use. -# The first line is used instead of the last so that this works -# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this -# assumes an 8 page AVT but lm isn't currently used anywhere.) -# -avt+s|concept avt status line changes, - eslok, hs, - lm#191, - dsl=\E[0*w, fsl=\E[1;1!w, - is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, - rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, - tsl=\E[2;1!w\E[;%p1%dH\E[2K, -avt|avt-s|concept-avt|avt w/80 columns, - use=avt+s, use=avt-ns, -avt-rv|avt-rv-s|avt reverse video w/sl, - flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, - use=avt+s, use=avt-ns, -avt-w|avt-w-s|concept avt 132 cols+status, - is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, - use=avt+s, use=avt-ns, -avt-w-rv|avt-w-rv-s|avt wide+status+rv, - flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, - smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, +att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, + cols#132, lm#54, wsl#97, + flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, + use=att4415, -#### Contel Business Systems. -# +# Note that this mode permits programming USER PF KEYS and labels +# However, when you program user pf labels you have to reselect +# user pf keys to make them appear! +att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s + \s%p2%s, + pln=\E[%p1%d;0;0;1q%p2%:-16.16s, -# Contel c300 and c320 terminals. -contel300|contel320|c300|Contel Business Systems C-300 or C-320, - am, in, xon, - cols#80, lines#24, xmc#1, - bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, - dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, - el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, - hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, - kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, - kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, - rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, -# Contel c301 and c321 terminals. -contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, - flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, - use=contel300, +att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, + use=att4415, -#### Data General (dg) -# -# According to James Carlson writing in January 1995, -# the terminals group at Data General was shut down in 1991; all these -# terminals have thus been discontinued. -# -# DG terminals have function keys that respond to the SHIFT and CTRL keys, -# e.g., SHIFT-F1 generates a different code from F1. To number the keys -# sequentially, first the unmodified key codes are listed as F1 through F15. -# Then their SHIFT versions are listed as F16 through F30, their CTRL versions -# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as -# F46 through F60. This is done in the private "includes" below whose names -# start with "dgkeys+". -# -# DG terminals generally support 8 bit characters. For each of these terminals -# two descriptions are supplied: -# 1) A default description for 8 bits/character communications, which -# uses the default DG international character set and keyboard codes. -# 2) A description with suffix "-7b" for 7 bits/character communications. -# This description must use the NON-DEFAULT native keyboard language. +att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, + use=att4415-rv, -# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), -# Ctrl/Shift fdkeys (kf34-kf44). +att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, + use=att4415-w, -dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, - ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, - kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, - kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, - kf11=\233011z, kf12=\233012z, kf13=\233013z, - kf14=\233014z, kf15=\233000z, kf16=\233101z, - kf17=\233102z, kf18=\233103z, kf19=\233104z, - kf2=\233002z, kf20=\233105z, kf21=\233106z, - kf22=\233107z, kf23=\233108z, kf24=\233109z, - kf25=\233110z, kf26=\233111z, kf27=\233112z, - kf28=\233113z, kf29=\233114z, kf3=\233003z, - kf30=\233100z, kf31=\233201z, kf32=\233202z, - kf33=\233203z, kf34=\233204z, kf35=\233205z, - kf36=\233206z, kf37=\233207z, kf38=\233208z, - kf39=\233209z, kf4=\233004z, kf40=\233210z, - kf41=\233211z, kf42=\233212z, kf43=\233213z, - kf44=\233214z, kf45=\233200z, kf46=\233301z, - kf47=\233302z, kf48=\233303z, kf49=\233304z, - kf5=\233005z, kf50=\233305z, kf51=\233306z, - kf52=\233307z, kf53=\233308z, kf54=\233309z, - kf55=\233310z, kf56=\233311z, kf57=\233312z, - kf58=\233313z, kf59=\233314z, kf6=\233006z, - kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, - khome=\233H, kprt=\233i, - -dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, - ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, - kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, - kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, - kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, - kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, - kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, - kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, - kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, - kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, - kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, - kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, - kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, - kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, - kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, - kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, - kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, - kf9=\E[009z, khome=\E[H, kprt=\E[i, +att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, + use=att4415-w-rv, -dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, - kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, - kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, - kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, - kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, - kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, - kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, - kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, - kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, - kf8=^^x, kf9=^^y, khome=^H, +att5420_2|AT&T 5420 model 2 80 cols, + am, db, hs, mir, msgr, xon, + cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, + cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, + cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, + el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, + home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, + indn=\E[%p1%dE, invis=\E[8m, + is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j + \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j + \E[29;0j\E[1;24r, + kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, + kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe, + kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, + kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, + kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, + mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n, + pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2 + %s\E~, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, + rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, + sc=\E7, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;, + sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, +att5420_2-w|AT&T 5420 model 2 in 132 column mode, + cols#132, + is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j + \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j + \E[29;0j\E[1;24r, + use=att5420_2, -dgkeys+15|Private entry describing 15 DG mode special keys, - kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, - kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, - kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, - kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, - kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, - kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, - kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, - kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, - kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, - kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, - kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, - kf9=^^y, +att4418|att5418|AT&T 5418 80 cols, + am, xon, + cols#80, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, + ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n, + is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, + kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, + kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, + kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, + kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, + kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, + rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, +att4418-w|att5418-w|AT&T 5418 132 cols, + cols#132, + is1=\E[?3h, use=att5418, -# Data General color terminals use the "Tektronix" color model. The total -# number of colors varies with the terminal model, as does support for -# attributes used in conjunction with color. +att4420|tty4420|teletype 4420, + OTbs, da, db, eo, msgr, ul, xon, + cols#80, lines#24, lm#72, + bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, + kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, + kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, + lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, + rmul=\EZ, smdc@, smso=\E}, smul=\E\\, -# Removed u7, u8 definitions since they conflict with tack: -# Preserve user-defined colors in at least some cases. -# u7=^^Fh, -# Default is ACM mode. -# u8=^^F}20^^Fi^^F}21, +# The following is a terminfo entry for the Teletype 4424 +# asynchronous keyboard-display terminal. It supports +# the vi editor. The terminal must be set up as follows, # -dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, - bce, - colors#16, ncv#53, pairs#256, - op=\036Ad\036Bd, - setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, - setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, - setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, - -dg+fixed|Fixed color info for DG D430C terminals in DG mode, - use=dgunix+fixed, - -# Video attributes are coordinated using static variables set by "sgr", then -# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. -# (D=dim, U=underline, B=blink, R=reverse.) -dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, - bce, - colors#8, ncv#16, pairs#64, - op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, - setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, +# HIGHLIGHT DEFINITION 3-TONE +# DISPLAY FUNCTION GROUP III +# +# The second entry below provides limited (a la adm3a) +# operation under GROUP II. +# +# This must be used with DISPLAY FUNCTION GROUP I or III +# and HIGHLIGHT DEFINITION 3-TONE +# The terminal has either bold or blink, depending on options +# +# (att4424: commented out =\E[1m, we don't need bright locked on -- esr) +att4424|tty4424|teletype 4424, + OTbs, am, xon, + cols#80, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, + dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, + ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h, + kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, + rmul=\EZ, + sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%| + %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;, + sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, + tbc=\EF, -dg+color|Color info for Data General D470C terminals in ANSI mode, - colors#16, ncv#53, pairs#256, - setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, - use=dg+color8, +att4424-1|tty4424-1|teletype 4424 in display function group I, + kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, + use=att4424, -dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, - bce, - colors#8, ncv#16, pairs#64, - op=\036Ad\036Bd, - setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, - setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, - setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, +# This entry is not one of AT&T's official ones, it was translated from the +# 4.4BSD termcap file. The highlight strings are different from att4424. +# I have no idea why this is -- older firmware version, maybe? +# The following two lines are the comment originally attached to the entry: +# This entry appears to avoid the top line - I have no idea why. +# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp +att4424m|tty4424m|teletype 4424M, + am, da, db, mir, + cols#80, it#8, lines#23, + bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, + dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>, + is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smso=\E[7m, smul=\E[4m, -dgmode+color|Color info for Data General D470C terminals in DG mode, - colors#16, pairs#256, - setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, - setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, - use=dgmode+color8, +# The Teletype 5425 is really version 2 of the Teletype 5420. It +# is quite similar, except for some minor differences. No page +# mode, for example, so all of the sequences used above have +# to change back to what's being used for the 5410. Many of the +# option settings have changed their numbering as well. +# +# This has been tested on a preliminary model. +# +# (att5425: added / based on the init string -- esr) +att5425|tty5425|att4425|AT&T 4425/5425, + am, da, db, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, + invis=\E[8m, is1=\E<\E[?3l$<100>, + is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h + \E[4i\Ex\E[25;1j\212, + is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, + kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, + kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, + kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, + nel=\r\n, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, + rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, + sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 + %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, + vpa=\E[%p1%{1}%+%dd, -dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, - bce, ccc, - colors#52, ncv#53, pairs#26, - initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X, - oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, - op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, - scp=\036RG2%p1%02X, +att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, + smkx=\E[21;1j\E[25;4j\Eent, use=att4425, -# Colors are in the order: normal, reverse, dim, dim + reverse. -dg+ccc|Configurable color info for DG D430C terminals in DG mode, - bce, ccc, - colors#52, ncv#53, pairs#26, - initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, - oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, - op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, - scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, +att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, + cols#132, lm#54, wsl#97, + is1=\E[?3h$<100>, use=tty5425, -# The generic DG terminal type (an 8-bit-clean subset of the 6053) -# Initialization string 1 sets: -# ^R - vertical scrolling enabled -# ^C - blinking enabled -dg-generic|Generic Data General terminal in DG mode, - am, bw, msgr, xon, - cols#80, lines#24, - bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, - cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, - mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, - smul=^T, use=dgkeys+11, - -# According to the 4.4BSD termcap file, the dg200 should be the -# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap -# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, -# maybe they were originally nuls (which would fit). - -dg200|data general dasher 200, - OTbs, am, bw, - cols#80, lines#24, - bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, - cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, - kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, - kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, - kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, - smso=^^D, smul=^T, - -# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL -dg210|dg-ansi|Data General 210/211, - am, - cols#80, lines#24, - OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH, - cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, - kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, - nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m, - smul=\E[4;m, -# From: Peter N. Wan -# courtesy of Carlos Rucalde of Vantage Software, Inc. -# (dg211: this had ., which was an ancient termcap hangover. -# I suspect the d200 function keys actually work on the dg211, check it out.) -dg211|Data General d211, - cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, - kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, - rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, - -# dg450 from Cornell (not official) -dg450|dg6134|data general 6134, - cub1@, cuf1=^X, use=dg200, - -# Not official... -# Note: lesser Dasher terminals will not work with vi because vi insists upon -# having a command to move straight down from any position on the bottom line -# and scroll the screen up, or a direct vertical scroll command. The 460 and -# above have both, the D210/211, for instance, has neither. We must use ANSI -# mode rather than DG mode because standard UNIX tty drivers assume that ^H is -# backspace on all terminals. This is not so in DG mode. -# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the -# grounds that there is no matching ":ml:" -# fixed garbled ":k9=\E[00\:z:" capability -- esr) -dg460-ansi|Data General Dasher 460 in ANSI-mode, - OTbs, am, msgr, ul, - cols#80, it#8, lines#24, - OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, - cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, - dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, - ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, - kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, - kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, - lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, - ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m, - smul=\E[4m, -# From: Wayne Throop (not official) -# Data General 605x -# Ought to work for a Model 6242, Type D210 as well as a 605x. -# Note that the cursor-down key transmits ^Z. Job control users, beware! -# This also matches a posted description of something called a `Dasher 100' -# so there's a dg100 alias here. -# (dg6053: the 4.4BSD file had , , . -- esr) -dg6053-old|dg100|data general 6053, - OTbs, am, bw, ul, - cols#80, lines#24, - OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, - cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, - home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, - kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, - kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, - rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, - smul=^T, - -# (Some performance can be gained over the generic DG terminal type) -dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, - xon@, - home=^P\0\0, ll=^P\0^W, use=dg-generic, - -# Like 6053, but adds reverse video and more keypad and function keys. -d200|d200-dg|Data General DASHER D200, - bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], - sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, - sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15, - use=dg6053, +# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. +# I also added / -- esr) +att4426|tty4426|teletype 4426S, + am, da, db, xon, + cols#80, lines#24, lm#48, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, + cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, + hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, + il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS, + is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, + kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, + nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, + rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, + smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%p1%dd, -# DASHER D210 series terminals in ANSI mode. -# Reverse video, no insert/delete character/line, 7 bits/character only. +# Terminfo entry for the AT&T 510 A Personal Terminal +# Function keys 9 - 16 are available only after the +# screen labeled (soft keys/action blocks) are labeled. Function key +# 9 corresponds to the leftmost touch target on the screen, +# function key 16 corresponds to the rightmost. # -# Initialization string 1 sets: -# <0 - scrolling enabled -# <1 - blink enabled -# <4 - print characters regardless of attributes -d210|d214|Data General DASHER D210 series, - am, bw, msgr, xon, - cols#80, lines#24, - bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, +# This entry is based on one done by Ernie Rice at Summit, NJ and +# changed by Anne Gallup, Skokie, IL, ttrdc!anne +att510a|bct510a|AT&T 510A Personal Terminal, + am, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lw#7, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, - el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, - ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, - sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m, - sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, - -# DASHER D210 series terminals in DG mode. -# Like D200, but adds clear to end-of-screen and needs XON/XOFF. -d210-dg|d214-dg|Data General DASHER D210 series in DG mode, - xon, - ed=^^FF, use=d200-dg, - -# DASHER D211 series terminals in ANSI mode. -# Like the D210, but with 8-bit characters and local printer support. -# -# Initialization string 2 sets: -# \E[2;1;1;1v -# 2;1 - 8 bit operations -# 1;1 - 8 bit (international) keyboard language -# \E(B - default primary character set (U.S. ASCII) -# \E)4 - default secondary character set (international) -# ^O - primary character set -# -d211|d215|Data General DASHER D211 series, - km, - is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, - use=d210, - -# Initialization string 2 sets: -# \E[2;0;1;0v -# 2;0 - 7 bit operations -# 1;0 - 7 bit (native) keyboard language -# \E(0 - default character set (the keyboard native language) -# ^O - primary character set -d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, - km@, - is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, + cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, + dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, + el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, + hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l, + is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, + kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, + kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, + kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, + mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 + %|%t;7%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, -# Like the D210 series, but adds support for 8-bit characters. -# -# Reset string 2 sets: -# ^^N - secondary character set -# ^^FS0> - 8 bit international character set -# ^^O - primary character set -# ^^FS00 - default character set (matching the native keyboard language) +# Terminfo entry for the AT&T 510 D Personal Terminal +# Function keys 9 through 16 are accessed by bringing up the +# system blocks. +# Function key 9 corresponds to the leftmost touch target on the screen, +# function key 16 corresponds to the rightmost. # -d211-dg|d215-dg|Data General DASHER D211 series in DG mode, - km, - rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, +# There are problems with soft key labeling. These are due to +# strangenesses in the native terminal that are impossible to +# describe in a terminfo. +att510d|bct510d|AT&T 510D Personal Terminal, + am, da, db, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, + el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, + invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, + kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, + kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, + kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, + kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, + mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, + rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, + rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, + rs2=\E[5;0|, sc=\E7, + sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 + %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, + smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, + smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, -d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, - use=d211-dg, +# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) +att500|att513|AT&T 513 using page mode, + am, chts, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lw#8, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r, + csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, + indn=\E[%p1%dE, invis=\E[8m, + is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, + kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, + kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, + kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, + kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, + kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, + kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, + khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, + kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, + kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, + kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, + ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, + mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, + nel=\EE, + pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s + \s%p2%s, + pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s + \s%p2%s, + pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, + rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, + rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, + rmul=\E[m, + rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0| + \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, + rs2=\E[5;0|, sc=\E7, + sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, + smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, -# Enhanced DG mode with changes to be more UNIX compatible. -d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, - mc5i, - it#8, - acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, - clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, - el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, - is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, - kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, - kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, - mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, - rs2=\036N\036FS0E\036O\036FS00, - sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, - sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, - vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, -d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, - lines#25, - is3=\036Fz2, use=d216+, - -d217-unix|Data General DASHER D217 in DG-UNIX mode, - use=d216-unix, -d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, - use=d216-unix-25, - -# DASHER D220 color terminal in ANSI mode. -# Like the D470C but with fewer colors and screen editing features. -# -# Initialization string 1 sets: -# \E[<0;<1;<4l -# <0 - scrolling enabled -# <1 - blink enabled -# <4 - print characters regardless of attributes -# \E[m - all attributes off -# Reset string 1 sets: -# \Ec - initial mode defaults (RIS) -# -d220|Data General DASHER D220, - mc5i@, - dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, - use=dg+color8, use=d470c, - -d220-7b|Data General DASHER D220 in 7 bit mode, - mc5i@, - dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, - use=dg+color8, use=d470c-7b, - -# Initialization string 3 sets: -# - default cursor (solid rectangle) -# Reset string 2 sets: -# ^^N - secondary character set -# ^^FS0> - 8 bit international character set -# ^^O - primary character set -# ^^FS00 - default character set (matching the native keyboard language) -# -d220-dg|Data General DASHER D220 color terminal in DG mode, - mc5i@, - dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, - rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, - use=d470c-dg, +# 01-07-88 +# printer must be set to EMUL ANSI to accept ESC codes +# stops at top margin +# sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font +# and alt font ascii,wrap on,tabs cleared +# disables newline on LF,Emphasized off +# The capability sets form length +att5310|att5320|AT&T Model 53210 or 5320 matrix printer, + xhpa, xvpa, + bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10, + orhi#100, orl#12, orvi#72, + cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w + %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O + %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t + \E[8w%;, + cr=\r, + csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi + nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1 + %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench + %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1 + %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit + y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos + aic%;, + cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, + ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, + lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e + %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, + rshm=\E[m, + scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1 + %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6} + %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t + \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t + \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t + \E(}%;, + smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, + smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, + u0=\E[%p1%dt, vpa=\E[%p1%dd, -# DASHER D230C color terminal in ANSI mode. -# Like the D220 but with minor ANSI compatibility improvements. -# -d230c|d230|Data General DASHER D230C, - blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, - rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, - sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, - sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, - smul=\E[4;50m, use=dgkeys+7b, use=d220, +# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL +# The following SET-UP modes are assumed for normal operation: +# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL +# Other SET-UP modes may be set for operator convenience or communication +# requirements. This termcap description is for the Resident Terminal Mode. +# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# The BRL entry also said: UNSAFE :ll=\E[70H: +att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, + am, xon, + cols#88, it#8, lines#70, vt#3, + bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT, + rs1=\Ec, sc=\E7, -d230c-dg|d230-dg|Data General DASHER D230C in DG mode, - use=d220-dg, +# 5620 terminfo (2.0 or later ROMS with char attributes) +# The following SET-UP modes are assumed for normal operation: +# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR +# Other SET-UP modes may be set for operator convenience or communication +# requirements. This termcap description is for Resident Terminal Mode. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# assumptions: (scroll forward one line) is only done at screen bottom +# Be aware that older versions of the dmd have a firmware bug that affects +# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. +# is from an otherwise inferior BRL for this terminal. That entry +# also has =\E[70H commented out and marked unsafe. +# For more, see the 5620 FAQ maintained by David Breneman . +att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, + OTbs, am, msgr, npc, xon, + cols#88, it#8, lines#70, + bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H, + cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n, + pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, + rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, + sgr0=\E[0m, smso=\E[7m, smul=\E[4m, +att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, + lines#24, use=att5620, +att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, + lines#34, use=att5620, +# 5620 layer running the "S" system's downloaded graphics handler: +att5620-s|tty5620-s|layer|vitty|5620 S layer, + OTbs, OTpt, am, + cols#80, it#8, lines#72, + bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, + cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, + el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + kll=\E[70;1H, -# DASHER D400/D450 series terminals. -# These add intelligent features like insert/delete to the D200 series. -# -# Initialization string 2 sets: -# ^^FQ2 - default cursor (solid rectangle) -# ^^FW - character protection disabled -# ^^FJ - normal (80 column) mode -# ^^F\^ - horizontal scrolling enabled (for alignment) -# ^^FX004? - margins at columns 0 and 79 -# ^^F] - horizontal scrolling disabled -# ^^O - primary character set -# ^^FS00 - default character set (the keyboard native language) -# - (should reset scrolling regions, but that glitches the screen) -# Reset string 1 sets: -# ^^FA - all terminal defaults except scroll rate -# Reset string 2 sets: -# ^^F] - horizontal scrolling disabled -# ^^FT0 - jump scrolling +# Entries for thru refer to the shifted system pf keys. # -d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, - mc5i, - acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, - cnorm=\036FQ2, dch1=^^K, dl1=^^FI, - enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, - ich1=^^J, il1=^^FH, - is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, - ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, - rs1=^^FA, rs2=\036F]\036FT0, - sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, - sgr0=\017\025\035\036E\036O, smacs=^^N, - vpa=\020\177%p1%c, use=d210-dg, +# Entries for thru refer to the alternate keypad mode +# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER +att605|AT&T 605 80 column 102key keyboard, + am, eo, xon, + cols#80, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il1=\E[L, ind=\n, invis=\E[8m, + is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, + kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, + kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, + kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, + kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, + kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, + kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, + kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, + kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, + kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, + kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, + kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, + mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, + smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%i%p1%dx, +att605-pc|ATT 605 in pc term mode, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x + \263, + cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, + kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, + kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, + rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>, + xoffc=g, xonc=e, use=att605, +att605-w|AT&T 605-w 132 column 102 key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605, +# (att610: I added / based on the init string. I also +# added and because the BSD file says the att615s have them, +# and the 615 is like a 610 with a big keyboard, and most of their other +# smart terminals support the same sequence -- esr) +att610|AT&T 610; 80 column; 98key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + indn=\E[%p1%dS, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, + nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, + rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, +att610-w|AT&T 610; 132 column; 98key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, + use=att610, -# DASHER D410/D460 series terminals in ANSI mode. -# These add a large number of intelligent terminal features. -# -# Initialization string 1 sets: -# \E[<0;<1;<2;<4l -# <0 - scrolling enabled -# <1 - blink enabled -# <2 - horizontal scrolling enabled (for alignment) -# <4 - print characters regardless of attributes -# \E[5;0v - normal (80 column) mode -# \E[1;1;80w - margins at columns 1 and 80 -# \E[1;6;<2h -# 1 - print all characters even if protected -# 6 - character protection disabled -# <2 - horizontal scrolling disabled -# - (should reset scrolling regions, but that glitches the screen) -# -# Initialization string 2 sets: -# \E[3;2;2;1;1;1v -# 3;2 - default cursor (solid rectangle) -# 2;1 - 8 bit operations -# 1;1 - international keyboard language -# \E(B - default primary character set (U.S. ASCII) -# \E)4 - default secondary character set (international) -# ^O - primary character set -# -# Reset string 1 sets: -# \Ec - initial mode defaults (RIS) -# \E[<2h - horizontal scrolling disabled -# -# Reset string 2 sets: -# \E[4;0;2;1;1;1v -# 4;0 - jump scrolling -# 2;1 - 8 bit operations -# 1;1 - 8 bit (international) keyboard language -# \E(B - default primary character set (U.S. ASCII) -# \E)4 - default secondary character set (international) -# -d410|d411|d460|d461|Data General DASHER D410/D460 series, - mc5i, - acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, - cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, - dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, - is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, - is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, - ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, - rs2=\E[4;0;2;1;1;1v\E(B\E)4, - sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;, - sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, +att610-103k|AT&T 610; 80 column; 103key keyboard, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, + kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, + kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, + kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r, + kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, + khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, + knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, + kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, + krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, + kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, +att610-103k-w|AT&T 610; 132 column; 103key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, + use=att610-103k, +att615|AT&T 615; 80 column; 98key keyboard, + kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, + kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, + kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, + kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, + kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, +att615-w|AT&T 615; 132 column; 98key keyboard, + kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, + kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, + kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, + kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, + kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, +att615-103k|AT&T 615; 80 column; 103key keyboard, + kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, +att615-103k-w|AT&T 615; 132 column; 103key keyboard, + kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, +# (att620: I added / based on the init string and +# / from a BSD termcap -- esr) +att620|AT&T 620; 80 column; 98key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + indn=\E[%p1%dS, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, + kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, + kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, + kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, + kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, + kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, + kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, + kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, + mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, + rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;, + sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, + smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%i%p1%dx, +att620-w|AT&T 620; 132 column; 98key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, + use=att620, +att620-103k|AT&T 620; 80 column; 103key keyboard, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, + kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, + kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, + kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r, + kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, + kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, + kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, + kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, + kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, + kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, + kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, + kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, + ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, -# Initialization string 2 sets: -# \E[3;2;2;0;1;0v -# 3;2 - default cursor (solid rectangle) -# 2;0 - 7 bit operations -# 1;0 - 7 bit (native) keyboard language -# \E(0 - default character set (the keyboard native language) -# ^O - primary character set -# -# Reset string 2 sets: -# \E[4;0;2;0;1;0v -# 4;0 - jump scrolling -# 2;0 - 7 bit operations -# 1;0 - 7 bit (native) keyboard language -# \E(0 - default character set (the keyboard native language) -# -d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, - km@, - enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, - rs2=\E[4;0;2;0;1;0v\E(0, - sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, - sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, +att620-103k-w|AT&T 620; 132 column; 103key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, + use=att620-103k, -d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, - km, - enacs@, rmacs=\036FS00, - sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, - sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, - use=d400-dg, +# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal +# The following SETUP modes are assumed for normal operation: +# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF +# Font_Size=Large Non-Layers_Window_Cols=80 +# Non-Layers_Window_Rows=60 +# Other SETUP modes may be set for operator convenience or communication +# requirements. Some capabilities assume a printer attached to the Aux EIA +# port. This termcap description is for the Fixed Non-Layers Window. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# (att630: added , and from a BSD termcap file -- esr) +att630|AT&T 630 windowing terminal, + OTbs, am, da, db, mir, msgr, npc, xon, + cols#80, it#8, lines#60, lm#0, + bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, + kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r, + kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, + kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, + kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, + kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, + mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, + rmul=\E[m, rs2=\Ec, sc=\E7, + sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7 + %;m, + sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, +att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, + lines#24, use=att630, -# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. +# This is the att700 entry for 700 native emulation of the AT&T 700 +# terminal. Comments are relative to changes from the 605V2 entry and +# att730 on which the entry is based. Comments show the terminfo +# capability name, termcap name, and description. # -# Initialization string 1 sets: -# \E[<0;<1;<2;<4l -# <0 - scrolling enabled -# <1 - blink enabled -# <2 - horizontal scrolling enabled (for alignment) -# <4 - print characters regardless of attributes -# \E[5;1v - compressed (135 column) mode -# \E[1;1;126 - margins at columns 1 and 126 -# \E[1;6;<2h -# 1 - print all characters even if protected -# 6 - character protection disabled -# <2 - horizontal scrolling disabled -# - (should reset scrolling regions, but that glitches the screen) +# Here is what's going onm in the init string: +# ESC [ 50;4| set 700 native mode (really is 605) +# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) +# ESC [ 53;0| set GenFlow to Xon/Xoff +# ESC [ 8 ;0| set CR on NL +# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) +# ESC [ ? 4 l jump scroll +# ESC [ ? 5 l/h video: normal (l); reverse (h) +# ESC [ ?13 l Labels on +# ESC [ ?15 l parity check = no +# ESC [ 13 l monitor mode off +# ESC [ 20 l LF on NL (not CRLF on NL) +# ESC [ ? 7 h autowrap on +# ESC [ 12 h local echo off +# ESC ( B GO = ASCII +# ESC ) 0 G1 = Special Char & Line Drawing +# ESC [ ? 31 l Set 7 bit controls # -# Reset string 1 sets: -# \Ec - initial mode defaults (RIS) -# \E[5;1v - compressed (135 column) mode -# \E[1;1;126w - margins at columns 1 and 126 -# \E[<2h - horizontal scrolling disabled +# Note: Most terminals, especially the 600 family use Reverse Video for +# standout mode. DEC also uses reverse video. The VT100 uses bold in addition +# Assume we should stay with reverse video for 70.. However, the 605V2 exits +# standout mode with \E[m (all normal attributes). The 730 entry simply +# exits reverse video which would leave other current attributes intact. It +# was assumed the 730 entry to be more correct so rmso has changed. The +# 605V2 has no sequences to turn individual attributes off, thus its setting +# and the rmso/smso settings from the 730. # -d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, - cols#126, - is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, - rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, - -d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, - cols#126, - is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, - rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, - -d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, - use=d410-dg, - -# These add intelligent features like scrolling regions. -d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, - civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, - cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, - home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, - is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, - ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, - rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, - vpa=\036FPFF%p1%2.2X, - wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, - use=d216+, -d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, - cols#132, - is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, - rs2=\036P@1\036FK\036FX0083, - wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, - use=d412-unix, -d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, - lines#25, - is3=\036Fz2, - wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, - use=d462+, -d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, - eslok, hs, - clear=\036FG\036PH, fsl=\036F}01\022, - is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, - tsl=\036F}00\036FP%p1%2.2X18\036PG, - wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, - use=d462+, - -# Relative cursor motions are confined to the current window, -# which is not what the scrolling region specification expects. -# Thus, relative vertical cursor positioning must be deleted. -d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, - csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, - cud1@, cuu1@, ll@, use=d462+, - -d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, - use=d412-unix, -d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, - use=d412-unix-w, -d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, - use=d412-unix-25, -d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, - use=d412-unix-s, -d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, - use=d412-unix-sr, - -d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, - use=d413-unix, -d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, - use=d413-unix-w, -d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, - use=d413-unix-25, -d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, - use=d413-unix-s, -d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, - use=d413-unix-sr, - -d430c-dg|d430-dg|Data General D430C in DG mode, - use=d413-dg, use=dg+fixed, -d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, - use=d413-dg, use=dg+ccc, - -d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, - use=d413-unix, use=dgunix+fixed, -d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, - use=d413-unix-w, use=dgunix+fixed, -d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, - use=d413-unix-25, use=dgunix+fixed, -d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, - use=d413-unix-s, use=dgunix+fixed, -d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, - use=d413-unix-sr, use=dgunix+fixed, -d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, - use=d413-unix, use=dgunix+ccc, -d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, - use=d413-unix-w, use=dgunix+ccc, -d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, - use=d413-unix-25, use=dgunix+ccc, -d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, - use=d413-unix-s, use=dgunix+ccc, -d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, - use=d413-unix-sr, use=dgunix+ccc, - -# DASHER D470C color terminal in ANSI mode. -# Like the D460 but with 16 colors and without a compressed mode. -# -# Initialization string 1 sets: -# \E[<0;<1;<2;<4l -# <0 - scrolling enabled -# <1 - blink enabled -# <2 - horizontal scrolling enabled (for alignment) -# <4 - print characters regardless of attributes -# \E[1;1;80w - margins at columns 1 and 80 -# \E[1;6;<2h -# 1 - print all characters even if protected -# 6 - character protection disabled -# <2 - horizontal scrolling disabled -# - (should reset scrolling regions, but that glitches the screen) -# -d470c|d470|Data General DASHER D470C, - is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, - sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, - use=dg+color, use=d460, - -d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, - is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, - sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;, - use=dg+color, use=d460-7b, - -# Initialization string 2 sets: -# ^^FQ2 - default cursor (solid rectangle) -# ^^FW - character protection disabled -# ^^F\^ - horizontal scrolling enabled (for alignment) -# ^^FX004? - margins at columns 0 and 79 -# ^^F] - horizontal scrolling disabled -# ^^O - primary character set -# ^^FS00 - default character set (the keyboard native language) -# - (should reset scrolling regions, but that glitches the screen) +# Note: For the same reason as above in rmso I changed exit under-score mode +# to specifically turn off underscore, rather than return to all normal +# attributes # -d470c-dg|d470-dg|Data General DASHER D470C in DG mode, - is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, - use=dgmode+color, use=d460-dg, - -# DASHER D555 terminal in ANSI mode. -# Like a D411, but has an integrated phone. -d555|Data General DASHER D555, - use=d411, -d555-7b|Data General DASHER D555 in 7-bit mode, - use=d411-7b, -d555-w|Data General DASHER D555 in wide mode, - use=d411-w, -d555-7b-w|Data General DASHER D555 in wide 7-bit mode, - use=d411-7b-w, -d555-dg|Data General DASHER D555 series in DG mode, - use=d411-dg, - -# DASHER D577 terminal in ANSI mode. -# Like a D411, but acts as a keyboard for serial printers ("KSR" modes). -d577|Data General DASHER D577, - use=d411, -d577-7b|Data General DASHER D577 in 7-bit mode, - use=d411-7b, -d577-w|Data General DASHER D577 in wide mode, - use=d411-w, -d577-7b-w|Data General DASHER D577 in wide 7-bit mode, - use=d411-7b-w, - -d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, - use=d411-dg, - -# DASHER D578 terminal. -# Like a D577, but without compressed mode; like a D470C in this respect. +# Note: The following pkey_xmit is taken from the 605V2 which contained the +# capability as pfxl. It was changed here to pfx since pfxl +# will only compile successfully with Unix 4.0 tic. Also note that pfx only +# allows strings to be parameters and label values must be programmed as +# constant strings. Supposedly the pfxl of Version 4.0 allows both labels +# and strings to be parameters. The 605V2 pfx entry should be examined later +# in this regard. For reference the 730 pfxl entry is shown here for comparison +# 730 pfx entry: +# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s +# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, # -# Initialization string 1 sets: -# \E[<0;<1;<2;<4l -# <0 - scrolling enabled -# <1 - blink enabled -# <2 - horizontal scrolling enabled (for alignment) -# <4 - print characters regardless of attributes -# \E[1;1;80w - margins at columns 1 and 80 -# \E[1;6;<2h -# 1 - print all characters even if protected -# 6 - character protection disabled -# <2 - horizontal scrolling disabled -# - (should reset scrolling regions, but that glitches the screen) +# (for 4.0 tic) +# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, # -d578|Data General DASHER D578, - is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, -d578-7b|Data General DASHER D578 in 7-bit mode, - is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, - -#### Datamedia (dm) +# (for <4.0 tic) +# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, # -# Datamedia was headquartered in Nashua, New Hampshire until it went -# out of business in 1993, but the ID plates on the terminals referred -# to the factory in Pennsauken, NJ. The factory was sold to a PCB board -# manufacturer which threw out all information about the terminals. +# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 # - -cs10|colorscan|Datamedia Color Scan 10, - msgr, - cols#80, lines#24, - bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, - ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, - kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, - sgr0=\E[m, smso=\E[7m, smul=\E[4m, -cs10-w|Datamedia Color Scan 10 with 132 columns, - cols#132, - cup=\E[%i%p1%02d;%p2%03dH, use=cs10, - -# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) -dm1520|dm1521|datamedia 1520, - OTbs, am, xenl, - cols#80, it#8, lines#24, - bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, - cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], - home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, - khome=^Y, -# dm2500: this terminal has both and . Applications using -# termcap/terminfo directly (rather than through ncurses) might be confused. -dm2500|datamedia2500|datamedia 2500, - OTbs, OTnc, - cols#80, lines#24, - bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, - cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, - dch1=\020\010\030\035$<10*>, - dl1=\020\032\030\035$<10*>, el=^W, home=^B, - ich1=\020\034\030\035$<10*>, - il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, - rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], - smdc=^P, smir=^P, smso=^N, -# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) -# also, has a meta-key. -# From: -# (dmchat: ":MT:" changed to ":km:" -- esr) -dmchat|dmchat version of datamedia 2500, - km, - dl1=\020\032\030\035$<2/>, - il1=\020\n\030\035\030\035$<1*/>, use=dm2500, -# (dm3025: ":MT:" changed to ":km:" -- esr) -dm3025|datamedia 3025a, - OTbs, km, - cols#80, it#8, lines#24, - bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, - cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, - dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, - home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, - is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, - smir=\EP, smso=\EO1, -dm3045|datamedia 3045a, - OTbs, am, eo, km@, ul, xenl, - dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, - kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, - kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, - khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, - use=dm3025, -# Datamedia DT80 soft switches: -# 1 0=Jump 1=Smooth -# Autorepeat 0=off 1=on -# Screen 0=Dark 1=light -# Cursor 0=u/l 1=block +# Port1 Interface # -# 2 Margin Bell 0=off 1=on -# Keyclick 0=off 1=on -# Ansi/VT52 0=VT52 1=Ansi -# Xon/Xoff 0=Off 1=On +# modular 10 pin Connector +# Left side Right side +# Pin 1 2 3 4 5 6 7 8 9 10 # -# 3 Shift3 0=Hash 1=UK Pound -# Wrap 0=Off 1=On -# Newline 0=Off 1=On -# Interlace 0=Off 1=On +# Key (notch) at bottom # -# 4 Parity 0=Odd 1=Even -# Parity 0=Off 1=On -# Bits/Char 0=7 1=8 -# Power 0=60Hz 1=50Hz +# Pin 1 DSR +# 3 DCD +# 4 DTR +# 5 Sig Ground +# 6 RD +# 7 SD +# 8 CTS +# 9 RTS +# 10 Frame Ground # -# 5 Line Interface 0=EIA 1=Loop -# Aux Interface 0=EIA 1=Loop -# Local Copy 0=Off 1=On -# Spare +# The manual is 189 pages and is loaded with details about the escape codes, +# etc..... Available from AT&T CIC 800-432-6600... +# ask for Document number 999-300-660.. # -# 6 Aux Parity 0=Odd 1=Even -# Aux Parity 0=Off 1=On -# Aux Bits/Char 0=7 1=8 -# CRT Saver 0=Off 1=On -# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. -dm80|dmdt80|dt80|datamedia dt80/1, - clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, - cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, - home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, - rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, - use=vt100, -# except in 132 column mode, where it needs a little padding. -# This is still less padding than the vt100, and you can always turn on -# the ^S/^Q handshaking, so you can use vt100 flavors for things like -# reverse video. -dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, - cols#132, - clear=\E[H\E[2J$<50/>, cud1=^J, - cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, - ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, -# From: Adam Thompson Sept 10 1995 -dt80-sas|Datamedia DT803/DTX for SAS usage, - am, bw, - cols#80, lines#24, - acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, - bel=^G, clear=^L, cr=^M, - csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, - cub1=^H, cud1=\EB, cuf1=^\, - cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, - el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, - is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, - kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, - rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, - smso=\E$2\004, tbc=\E'0, - -# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL -# These aren't end-all Excel termcaps; but do insert/delete char/line -# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) -# The naming convention has been bent somewhat, with the use of E? (where -# E is for 'Excel') as # a name. This was done to distinguish the entries -# from the other Datamedias in use here, and yet to associate a model of -# the Excel terminals with the regular datamedia terminals that share -# major characteristics. -excel62|excel64|datamedia Excel 62, - dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, - kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, - use=dt80, -excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, - dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, - kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, - use=dt80w, -excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, - dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, - kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, - smir=\E[4h, use=dt80, +att700|AT&T 700 24x80 column display w/102key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, + fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, + is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h + \E(B\E)0\E[?31l\E[0m\017, + is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, + kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, + kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, + kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, + kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, + kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, + kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, + kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, + kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, + mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s + \s\s\s\s\s\s%;%p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, + rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, + rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, + smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, + tsl=\E7\E[99;%i%p1%dx, -#### Falco +# This entry was modified 3/13/90 by JWE. +# fixes include additions of , correcting , and modification +# of . (See comments below) +# att730 has status line of 80 chars +# These were commented out: , , +# the and up keys are used for shifted system Fkeys +# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is +# currently the same as (unshifted HOME or \E[H). On the 102, 102+1 +# and 122 key keyboards, the 730's translation is \E[2J. For consistency +# has been commented out. The user can uncomment if using the +# 102, 102+1, or 122 key keyboards +# kHOM=\E[2J, +# (att730: I added / based on the init string -- esr) +att730|AT&T 730 windowing terminal, + am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, + cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, + home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\ED, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, + kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, + kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, + kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, + kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, + kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, + kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, + kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, + mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25} + %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, + pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, + rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 + %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, + swidm=\E#6, tsl=\E7\E[;%i%p1%dx, +att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, + lines#41, use=att730, +att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, + lines#24, use=att730, +att730r|730MTGr|AT&T 730 rev video windowing terminal Version, + flash=\E[?5l$<200>\E[?5h, + is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730, +att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, + lines#41, use=att730r, +att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, + lines#24, use=att730r, + +# The following represents the screen layout along with the associated +# bezel buttons for the 5430/pt505 terminal. The "kf" designations do +# not appear on the screen but are shown to reference the bezel buttons. +# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate +# position relative to the screen. # -# Falco Data Products -# 440 Potrero Avenue -# Sunnyvale, CA 940864-196 -# Vox: (800)-325-2648 -# Fax: (408)-745-7860 -# Net: techsup@charm.sys.falco.com # -# Current Falco models as of 1995 are generally ANSI-compatible and support -# emulations of DEC VT-series, Wyse, and Televideo types. # - -# Test version for Falco ts-1. See for info -# This terminal was released around 1983 and was discontinued long ago. -# The standout and underline highlights are the same. -falco|ts1|ts-1|falco ts-1, - OTbs, am, - cols#80, it#8, lines#24, - bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, - dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, - ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, - kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, - smir=\Eq, smso=\Eg1, smul=\Eg1, -falco-p|ts1p|ts-1p|falco ts-1 with paging option, - OTbs, am, da, db, mir, msgr, ul, - cols#80, it#8, lines#24, - bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, - cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, - dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, - il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, - kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, - rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, - smso=\Eg4, smul=\Eg1, -# (ts100: I added / based on the init string -- esr) -ts100|ts100-sp|falco ts100-sp, - am, mir, msgr, xenl, xon, - cols#80, it#8, lines#24, vt#3, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, - clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, - cuf=\E[%p1%dC, cuf1=\E[C$<2>, - cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, - cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, - el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, - ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, - kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, - rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, - rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, - rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, - sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, - sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, - smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, - use=vt100+fnkeys, -ts100-ctxt|falco ts-100 saving context, - rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, - -#### Florida Computer Graphics +# +----------------------------------------------------------------+ +# | | +# XXXX | kf0 kf24 | XXXX +# | | +# | | +# XXXX | kf1 kf23 | XXXX +# | | +# | | +# XXXX | kf2 kf22 | XXXX +# | | +# | | +# XXXX | kf3 kf21 | XXXX +# | | +# | | +# XXXX | kf4 kf20 | XXXX +# | | +# | | +# XXXX | kf5 kf19 | XXXX +# | | +# | | +# XXXX | kf6 kf18 | XXXX +# | | +# | | +# XXXX | | XXXX +# | | +# | | +# +----------------------------------------------------------------+ # - -# Florida Computer Graphics Beacon System, using terminal emulator program -# "host.com", as provided by FCG. This description is for an early release -# of the "host" program. Known bug: clears the whole screen, so it's -# commented out. - -# From: David Bryant 1/7/83 -beacon|FCG Beacon System, - am, da, db, - cols#80, lines#32, - bel=\ESTART\r\E37\r\EEND\r$<1>, - blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, - cub1=^H, cud1=^J, cuf1=\EV, - cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, - dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, - ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, - rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, - rmul=\ESTART\r\E60\,0\r\EEND\r, - sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, - smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, - smso=\ESTART\r\E70\,6\r\EEND\r$<20>, - smul=\ESTART\r\E60\,1\r\EEND\r, - -#### Fluke +# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # - -# The f1720a differences from ANSI: no auto margin, destructive -# tabs, # of lines, funny highlighting and underlining -f1720|f1720a|fluke 1720A, - xt, - cols#80, lines#16, xmc#1, - bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, - cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, - el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], - kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, - smso=\E[7m, smul=\E[4m, - -#### Liberty Electronics (Freedom) +# Note: XXXX represents the screen buttons +# CMD REDRAW # -# Liberty Electronics -# 48089 Fremont Blvd -# Fremont CA 94538 -# Vox: (510)-623-6000 -# Fax: (510)-623-7021 - -# From: -# (f100: added empty to suppress a tic warning; -# made this relative to adm+sgr -- note that isn't -# known to work for f100 but does on the f110. --esr) -f100|freedom|freedom100|freedom model 100, - OTbs, am, bw, hs, mir, msgr, xon, - cols#80, lines#24, - acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, - flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, - ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, - is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, - kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, - kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, - smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, - vpa=\E[%p1%{32}%+%c, use=adm+sgr, -f100-rv|freedom-rv|freedom 100 in reverse video, - flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, -# The f110 and f200 have problems with vi(1). They use the ^V -# code for the down cursor key. When kcud1 is defined in terminfo -# as ^V, the Control Character Quoting capability (^V in insert mode) -# is lost! It cannot be remapped in vi because it is necessary to enter -# a ^V to to quote the ^V that is being remapped!!! +# MAIL # -# f110/f200 users will have to decide whether -# to lose the down cursor key or the quoting capability. We will opt -# initially for leaving the quoting capability out, since use of VI -# is not generally applicable to most interactive applications -# (f110: added , & from f100 -- esr) -f110|freedom110|Liberty Freedom 110, - bw@, eslok, - it#8, wsl#80, - blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, - dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, - ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, - kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, - ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, - smso=\EG<, tsl=\Ef, use=f100, -f110-14|Liberty Freedom 110 14inch, - dch1@, use=f110, -f110-w|Liberty Freedom 110 - 132 cols, - cols#132, use=f110, -f110-14w|Liberty Freedom 110 14in/132 cols, - cols#132, - dch1@, use=f110, -# (f200: added to suppress tic warnings re / --esr) -f200|freedom200|Liberty Freedom 200, - OTbs, am, eslok, hs, mir, msgr, xon, - cols#80, it#8, lines#24, wsl#80, - acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, - clear=^Z, cnorm=\E.1, cr=^M, - csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, - cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, - dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, - flash=\Eo$<200/>\En, fsl=^M, home=^^, - hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, - kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, - kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, - kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, - kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, - ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, - tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, -f200-w|Liberty Freedom 200 - 132 cols, - cols#132, use=f200, -# The f200 has the ability to reprogram the down cursor key. The key is -# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, -# so powering the terminal off and on will not cause the change to be lost. -f200vi|Liberty Freedom 200 for vi, - flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, -f200vi-w|Liberty Freedom 200 - 132 cols for vi, - cols#132, use=f200vi, - -#### GraphOn (go) +# version 1 note: +# The character string sent by key 'kf26' may be user programmable +# to send either \E[16s, or \E[26s. +# The character string sent by key 'krfr' may be user programmable +# to send either \E[17s, or \E[27s. # -# Graphon Corporation -# 544 Division Street -# Campbell, CA 95008 -# Vox: (408)-370-4080 -# Fax: (408)-370-5047 -# Net: troy@graphon.com (Troy Morrison) +# Depression of the "CMD" key sends \E! (kcmd) +# Depression of the "MAIL" key sends \E[26s (kf26) +# "REDRAW" same as "REFRESH" (krfr) # +# "kf" functions adds carriage return to output string if terminal is in +# 'new line' mode. # -# The go140 and go225 have been discontinued. GraphOn now makes X terminals, -# including one odd hybrid that starts out life on power-up as a character -# terminal, than can be switched to X graphics mode (driven over the serial -# line) by an escape sequence. No info on this beast yet. -# (go140: I added / based on the init string -- esr) -go140|graphon go-140, - OTbs, - cols#80, it#8, lines#24, - clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C, - cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - ed=\E[J$<10/>, el=\E[K, ht=^I, - if=/usr/share/tabset/vt100, il1=\E[L, - is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, - kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, - rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, - rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, - smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, -go140w|graphon go-140 in 132 column mode, - am, - cols#132, - is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, - use=go140, -# Hacked up vt200 termcap to handle GO-225/VT220 -# From: -# (go225: I added / based on the init string -- esr) -go225|go-225|Graphon 225, - OTbs, am, mir, xenl, - cols#80, it#8, lines#25, vt#3, - blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, - csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, - ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, - is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, - kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, - kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, - rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, - rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, - rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, - sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, - smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, - -#### Harris (Beehive) +# The following are functions not covered in the table above: # -# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. -# Their terminal group is ancient history now (1995) though the parent -# company is still in business. +# Set keyboard character (SKC): \EPn1;Pn2w +# Pn1= 0 Back Space key +# Pn1= 1 Break key +# Pn2= Program char (hex) # - -# Beehive documentation is undated and marked Preliminary and has no figures -# so we must have early Superbee2 (Model 600, according to phone conversation -# with mfr.). It has proved reliable except for some missing padding -# (notably after \EK and at bottom of screen). +# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t +# Pn1= Window number (1-39) +# Pn2-Pn5= Y;X;Y;X coordinates # -# The key idea is that AEP mode is poison for & that US's in -# the local memory should be avoided like the plague. That means -# that the 2048 character local buffer is used as 25 lines of 80 -# characters, period. No scrolling local memory, folks. It also -# appears that we cannot use naked INS LINE feature since it uses -# US. The sbi fakes with an 80-space insert that may be too -# slow at low speeds; also spaces get converted to \040 which is -# too long for some programs (not vi). DEL LINE is ok but slow. +# Screen Selection (SSL): \E[Pnu +# Pn= Window number # -# The string is designed for last line of screen ONLY; cup to -# 25th line corrects the motion inherent in scrolling to Page 1. +# Set Terminal Modes (SM): \E[Pnh +# Pn= 3 Graphics mode +# Pn= > Cursor blink +# Pn= < Enter new line mode +# Pn= = Enter reverse insert/replace mode +# Pn= ? Enter no scroll mode # -# There is one understood bug. It is that the screen appears to -# pop to a new (blank) page after a , or leave a half-line -# ellipsis to a quad that is the extra 48 memory locations. The -# data received is dumped into memory but not displayed. Not to -# worry if is being used; the lines not displayed will be, -# whenever the cursor is moved up there. Since is addressed -# relative to MEMORY of window, nothing is lost; but beware of -# relative cursor motion (,,,). Recommended, -# therefore, is setenv MORE -c . +# Reset Terminal Mode (RM): \E[Pnl +# Pn= 3 Exit graphics mode +# Pn= > Exit cursor blink +# Pn= < Exit new line mode +# Pn= = Exit reverse insert/replace mode +# Pn= ? Exit no scroll mode # -# WARNING: Not all features tested. +# Screen Status Report (SSR): \E[Pnp +# Pn= 0 Request current window number +# Pn= 1 Request current window dimensions # -# Timings are assembled from 3 sources. Some timings may reflect -# SB2/Model 300 that were used if more conservative. -# Tested on a Model 600 at 1200 and 9600 bd. +# Device Status Report (DSR): \E[6n Request cursor position # -# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly -# placed on the keyboard and useless because of AEP, is made -# into a backspace key. In use ESC must be pressed twice (to send) -# and sending ^C must be prefixed by ESC to avoid that weird -# transmit mode associated with ENTER key. +# Call Status Report (CSR): \E[Pnv +# Pn= 0 Call failed +# Pn= 1 Call successful # -# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across -# the screen, then it has dropped into ENTER mode; hit -# RESET--ONLINE--!tset. +# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string +# Pn1= Button number to be loaded +# Pn2= Character count of "string" +# Pn3= Key mode being loaded: +# 0= Unshifted +#