1 -------------------------------------------------------------------------------
2 -- Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. --
4 -- Permission is hereby granted, free of charge, to any person obtaining a --
5 -- copy of this software and associated documentation files (the --
6 -- "Software"), to deal in the Software without restriction, including --
7 -- without limitation the rights to use, copy, modify, merge, publish, --
8 -- distribute, distribute with modifications, sublicense, and/or sell copies --
9 -- of the Software, and to permit persons to whom the Software is furnished --
10 -- to do so, subject to the following conditions: --
12 -- The above copyright notice and this permission notice shall be included --
13 -- in all copies or substantial portions of the Software. --
15 -- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS --
16 -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF --
17 -- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN --
18 -- NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, --
19 -- DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR --
20 -- OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE --
21 -- USE OR OTHER DEALINGS IN THE SOFTWARE. --
23 -- Except as contained in this notice, the name(s) of the above copyright --
24 -- holders shall not be used in advertising or otherwise to promote the --
25 -- sale, use or other dealings in this Software without prior written --
27 -------------------------------------------------------------------------------
28 -- $Id: INSTALL,v 1.167 2013/03/09 21:22:04 tom Exp $
29 ---------------------------------------------------------------------
30 How to install Ncurses/Terminfo on your system
31 ---------------------------------------------------------------------
33 ************************************************************
34 * READ ALL OF THIS FILE BEFORE YOU TRY TO INSTALL NCURSES. *
35 ************************************************************
37 You should be reading the file INSTALL in a directory called ncurses-d.d, where
38 d.d is the current version number. There should be several subdirectories,
39 including `c++', `form', `man', `menu', 'misc', `ncurses', `panel', `progs',
40 and `test'. See the README file for a roadmap to the package.
42 If you are a distribution integrator or packager, please read and act on the
43 section titled IF YOU ARE A SYSTEM INTEGRATOR below.
45 If you are converting from BSD curses and do not have root access, be sure
46 to read the BSD CONVERSION NOTES section below.
48 If you are trying to build applications using gpm with ncurses,
49 read the USING NCURSES WITH GPM section below.
51 If you are running over the Andrew File System see the note below on
52 USING NCURSES WITH AFS.
54 If you are cross-compiling, see the note below on BUILDING NCURSES WITH A
57 If you want to build the Ada95 binding, go to the Ada95 directory and
58 follow the instructions there. The Ada95 binding is not covered below.
64 You will need the following to build and install ncurses under UNIX:
66 * ANSI C compiler (gcc, for instance)
68 * awk (mawk or gawk will do)
70 * BSD or System V style install (a script is enclosed)
72 Ncurses has been also built in the OS/2 EMX environment.
75 INSTALLATION PROCEDURE:
76 ----------------------
78 1. First, decide whether you want ncurses to replace your existing library (in
79 which case you'll need super-user privileges) or be installed in parallel
82 The --prefix option to configure changes the root directory for installing
83 ncurses. The default is normally in subdirectories of /usr/local, except
84 for systems where ncurses is normally installed as a system library (see
85 "IF YOU ARE A SYSTEM INTEGRATOR"). Use --prefix=/usr to replace your
86 default curses distribution.
88 The package gets installed beneath the --prefix directory as follows:
90 In $(prefix)/bin: tic, infocmp, captoinfo, tset,
91 reset, clear, tput, toe, tabs
92 In $(prefix)/lib: libncurses*.* libcurses.a
93 In $(prefix)/share/terminfo: compiled terminal descriptions
94 In $(prefix)/include: C header files
95 Under $(prefix)/man: the manual pages
97 Note that the configure script attempts to locate previous installation of
98 ncurses, and will set the default prefix according to where it finds the
101 Do not use commands such as
103 make install prefix=XXX
105 to change the prefix after configuration, since the prefix value is used
106 for some absolute pathnames such as TERMINFO. Instead do this
108 make install DESTDIR=XXX
110 See also the discussion of --with-install-prefix.
112 2. Type `./configure' in the top-level directory of the distribution to
113 configure ncurses for your operating system and create the Makefiles.
114 Besides --prefix, various configuration options are available to customize
115 the installation; use `./configure --help' to list the available options.
117 If your operating system is not supported, read the PORTABILITY section in
118 the file ncurses/README for information on how to create a configuration
119 file for your system.
121 The `configure' script generates makefile rules for one or more object
122 models and their associated libraries:
124 libncurses.a (normal)
126 libcurses.a (normal, a link to libncurses.a)
127 This gets left out if you configure with --disable-overwrite.
129 libncurses.so (shared)
131 libncurses_g.a (debug)
133 libncurses_p.a (profile)
135 libncurses.la (libtool)
137 If you configure using the --enable-widec option, a "w" is appended to the
138 library names (e.g., libncursesw.a), and the resulting libraries support
139 wide-characters, e.g., via a UTF-8 locale. The corresponding header files
140 are compatible with the non-wide-character configuration; wide-character
141 features are provided by ifdef's in the header files. The wide-character
142 library interfaces are not binary-compatible with the non-wide-character
143 version. Building and running the wide-character code relies on a fairly
144 recent implementation of libiconv. We have built this configuration on
145 various systems using libiconv, sometimes requiring libutf8.
147 If you configure using the --with-pthread option, a "t" is appended to
148 the library names (e.g., libncursest.a, libncursestw.a).
150 If you do not specify any models, the normal and debug libraries will be
151 configured. Typing `configure' with no arguments is equivalent to:
153 ./configure --with-normal --with-debug --enable-overwrite
157 ./configure --with-shared
159 makes the shared libraries the default, resulting in
161 ./configure --with-shared --with-normal --with-debug --enable-overwrite
163 If you want only shared libraries, type
165 ./configure --with-shared --without-normal --without-debug
167 Rules for generating shared libraries are highly dependent upon the choice
168 of host system and compiler. We've been testing shared libraries on
169 several systems, but more work needs to be done to make shared libraries
170 work on other systems.
172 If you have libtool installed, you can type
174 ./configure --with-libtool
176 to generate the appropriate static and/or shared libraries for your
177 platform using libtool.
179 You can make curses and terminfo fall back to an existing file of termcap
180 definitions by configuring with --enable-termcap. If you do this, the
181 library will search /etc/termcap before the terminfo database, and will
182 also interpret the contents of the TERM environment variable. See the
183 section BSD CONVERSION NOTES below.
185 3. Type `make'. Ignore any warnings, no error messages should be produced.
186 This should compile the ncurses library, the terminfo compiler tic(1),
187 captoinfo(1), infocmp(1), toe(1), clear(1) tset(1), reset(1), and tput(1)
188 programs (see the manual pages for explanation of what they do), some test
189 programs, and the panels, menus, and forms libraries.
191 4. Run ncurses and several other test programs in the test directory to
192 verify that ncurses functions correctly before doing an install that
193 may overwrite system files. Read the file test/README for details on
196 NOTE: You must have installed the terminfo database, or set the
197 environment variable $TERMINFO to point to a SVr4-compatible terminfo
198 database before running the test programs. Not all vendors' terminfo
199 databases are SVr4-compatible, but most seem to be. Exceptions include
200 DEC's Digital Unix (formerly known as OSF/1).
202 If you run the test programs WITHOUT installing terminfo, ncurses may
203 read the termcap file and cache that in $HOME/.terminfo, which will
204 thereafter be used instead of the terminfo database. See the comments
205 on "--enable-getcap-cache", to see why this is a Bad Thing.
207 It is possible to configure ncurses to use other terminfo database formats.
208 A few are provided as examples in the include-directory (see --with-caps).
210 The ncurses program is designed specifically to test the ncurses library.
211 You can use it to verify that the screen highlights work correctly, that
212 cursor addressing and window scrolling works OK, etc.
214 5. Once you've tested, you can type `make install' to install libraries,
215 the programs, the terminfo database and the manual pages. Alternately, you
216 can type `make install' in each directory you want to install. In the
217 top-level directory, you can do a partial install using these commands:
219 'make install.progs' installs tic, infocmp, etc...
220 'make install.includes' installs the headers.
221 'make install.libs' installs the libraries (and the headers).
222 'make install.data' installs the terminfo data. (Note: `tic' must
223 be installed before the terminfo data can be
225 'make install.man' installs the manual pages.
227 ############################################################################
228 # CAVEAT EMPTOR: `install.data' run as root will NUKE any existing #
229 # terminfo database. If you have any custom or unusual entries SAVE them #
230 # before you install ncurses. I have a file called terminfo.custom for #
231 # this purpose. Don't forget to run tic on the file once you're done. #
232 ############################################################################
234 The terminfo(5) manual page must be preprocessed with tbl(1) before
235 being formatted by nroff(1). Modern man(1) implementations tend to do
236 this by default, but you may want to look at your version's manual page
237 to be sure. You may also install the manual pages after preprocessing
238 with tbl(1) by specifying the configure option --with-manpage-tbl.
240 If the system already has a curses library that you need to keep using
241 you'll need to distinguish between it and ncurses. See the discussion of
242 --disable-overwrite. If ncurses is installed outside the standard
243 directories (/usr/include and /usr/lib) then all your users will need to
244 use the -I option to compile programs and -L to link them.
246 If you have another curses installed in your system and you accidentally
247 compile using its curses.h you'll end up with a large number of
248 undefined symbols at link time.
250 IF YOU DO NOT HAVE ROOT: Change directory to the `progs' subdirectory
251 and run the `capconvert' script. This script will deduce various things
252 about your environment and use them to build you a private terminfo tree,
253 so you can use ncurses applications.
255 If more than one user at your site does this, the space for the duplicate
256 trees is wasted. Try to get your site administrators to install a system-
257 wide terminfo tree instead.
259 See the BSD CONVERSION NOTES section below for a few more details.
261 6. The c++ directory has C++ classes that are built on top of ncurses and
262 panels. You must have c++ (and its libraries) installed before you can
263 compile and run the demo.
265 Use --without-cxx-binding to tell configure to not build the C++ bindings
268 If you do not have C++, you must use the --without-cxx option to tell
269 the configure script to not attempt to determine the type of 'bool'
270 which may be supported by C++. IF YOU USE THIS OPTION, BE ADVISED THAT
271 YOU MAY NOT BE ABLE TO COMPILE (OR RUN) NCURSES APPLICATIONS WITH C++.
274 SUMMARY OF CONFIGURE OPTIONS:
275 ----------------------------
277 The configure script provides a short list of its options when you type
281 The --help and several options are common to all configure scripts that are
282 generated with autoconf. Those are all listed before the line
284 --enable and --with options recognized:
286 The other options are specific to this package. We list them in alphabetic
289 --disable-assumed-color
290 With ncurses 5.1, we introduced a new function, assume_default_colors()
291 which allows applications to specify what the default foreground and
292 background color are assumed to be. Most color applications use
293 full-screen color; but a few do not color the background. While the
294 assumed values can be overridden by invoking assume_default_colors(),
295 you may find it useful to set the assumed values to the pre-5.1
296 convention, using this configure option.
299 Assume machine has little memory. The configure script attempts to
300 determine if your machine has enough memory (about 6Mb) to compile the
301 terminfo database without writing portions to disk. Some allocators
302 return deceptive results, so you may have to override the configure
303 script. Or you may be building tic for a smaller machine.
305 --disable-big-strings
306 Disable compile-time optimization of predefined tables which puts
307 all of their strings into a very long string, to reduce relocation
311 Use only built-in data. The ncurses libraries normally read terminfo
312 and termcap data from disk. You can configure ncurses to have a
313 built-in database, aka "fallback" entries. Embedded applications may
314 have no need for an external database. Some, but not all of the
315 programs are useful in this configuration, e.g., reset and tput versus
319 Disable function-extensions. Configure ncurses without the functions
320 that are not specified by XSI. See ncurses/modules for the exact
321 list of library modules that would be suppressed.
324 Compile without hashmap scrolling-optimization code. This algorithm is
327 --disable-home-terminfo
328 The $HOME/.terminfo directory is normally added to ncurses' search
329 list for reading/writing terminfo entries, since that directory is
330 more likely writable than the system terminfo database. Use this
331 option to disable the feature altogether.
334 Disable compiler flags needed to use large-file interfaces.
336 --disable-libtool-version
337 when using --with-libtool, control how the major/minor version numbers
338 are used for constructing the library name.
340 The default uses the -version-number feature of libtool, which makes
341 the library names compatible (though not identical) with the standard
342 build using --with-shared.
344 Use --disable-libtool-version to use the libtool -version-info feature.
345 This corresponds to the setting used before patch 20100515.
348 For testing, compile-in code that frees memory that normally would not
349 be freed, to simplify analysis of memory-leaks.
351 Any implementation of curses must not free the memory associated with
352 a screen, since (even after calling endwin()), it must be available
353 for use in the next call to refresh(). There are also chunks of
354 memory held for performance reasons. That makes it hard to analyze
355 curses applications for memory leaks. To work around this, build
356 a debugging version of the ncurses library which frees those chunks
357 which it can, and provides the _nc_free_and_exit() function to free
358 the remainder on exit. The ncurses utility and test programs use this
359 feature, e.g., via the ExitProgram() macro.
362 The header files will ignore use of the _LP64 symbol to make chtype
363 and mmask_t types 32 bits (they may be long on 64-bit hosts, for
364 compatibility with older releases).
366 NOTE: this is potentially an ABI change, depending on existing
367 packages. The default for this option is "disabled" for ncurses
368 ABI 5, and "enabled" for ABI 6.
371 For testing, use functions rather than macros. The program will run
372 more slowly, but it is simpler to debug. This defines NCURSES_NOMACROS
373 at build time. See also the --enable-expanded option.
376 If you are installing ncurses on a system which contains another
377 development version of curses, or which could be confused by the loader
378 for another version, we recommend that you leave out the link to
379 -lcurses. The ncurses library is always available as -lncurses.
380 Disabling overwrite also causes the ncurses header files to be
381 installed into a subdirectory, e.g., /usr/local/include/ncurses,
382 rather than the include directory. This makes it simpler to avoid
383 compile-time conflicts with other versions of curses.h
386 If --enable-rpath is given, the generated makefiles normally will
387 rebuild the libraries during install. Use this option to simply
388 copy whatever the linked produced.
390 This option is ignored if --enable-rpath is not given.
392 --disable-root-environ
393 Compile with environment restriction, so certain environment variables
394 are not available when running as root, or via a setuid/setgid
395 application. These are (for example $TERMINFO) those that allow the
396 search path for the terminfo or termcap entry to be customized.
399 Normally the configure script helps link libraries found in unusual
400 places by adding an rpath option to the link command. If you are
401 building packages, this feature may be redundant. Use this option
402 to suppress the feature.
404 --disable-scroll-hints
405 Compile without scroll-hints code. This option is ignored when
406 hashmap scrolling is configured, which is the default.
408 --disable-tic-depends
409 When building shared libraries, normally the tic library is linked to
410 depend upon the ncurses library (or equivalently, on the tinfo-library
411 if the --with-termlib option was given). The tic- and tinfo-library
412 ABIs do not depend on the --enable-widec option. Some packagers have
413 used this to reduce the number of library files which are packaged by
414 using only one copy of those libraries. To make this work properly,
415 the tic library must be built without an explicit dependency on the
416 underlying library (ncurses vs ncursesw, tinfo vs tinfow). Use this
417 configure option to do that.
419 configure --with-ticlib --with-shared --disable-tic-depends
421 --disable-tparm-varargs
422 Portable programs should call tparm() using the fixed-length parameter
423 list documented in X/Open. ncurses provides varargs support for this
424 function. Use --disable-tparm-varargs to disable this support.
427 For testing, compile-in assertion code. This is used only for a few
428 places where ncurses cannot easily recover by returning an error code.
430 --enable-broken_linker
431 A few platforms have what we consider a broken linker: it cannot link
432 objects from an archive solely by referring to data objects in those
433 files, but requires a function reference. This configure option
434 changes several data references to functions to work around this
437 NOTE: With ncurses 5.1, this may not be necessary, since we are
438 told that some linkers interpret uninitialized global data as a
439 different type of reference which behaves as described above. We have
440 explicitly initialized all of the global data to work around the
444 Recognize BSD-style prefix padding. Some ancient BSD programs (such as
445 nethack) call tputs("50") to implement delays.
448 Compile with experimental $COLORFGBG code. That environment variable
449 is set by some terminal emulators as a hint to applications, by
450 advertising the default foreground and background colors. During
451 initialization, ncurses sets color pair 0 to match this.
454 The curses interface as documented in XSI is rather old, in fact
455 including features that precede ANSI C. The prototypes generally do
456 not make effective use of "const". When using stricter compilers (or
457 gcc with appropriate warnings), you may see warnings about the mismatch
458 between const and non-const data. We provide a configure option which
459 changes the interfaces to use const - quieting these warnings and
460 reflecting the actual use of the parameters more closely. The ncurses
461 library uses the symbol NCURSES_CONST for these instances of const,
462 and if you have asked for compiler warnings, will add gcc's const-qual
463 warning. There will still be warnings due to subtle inconsistencies
464 in the interface, but at a lower level.
466 NOTE: configuring ncurses with this option may detract from the
467 portability of your applications by encouraging you to use const in
468 places where the XSI curses interface would not allow them. Similar
469 issues arise when porting to SVr4 curses, which uses const in even
473 Use the option --disable-echo to make the build-log less verbose by
474 suppressing the display of the compile and link commands. This makes
475 it easier to see the compiler warnings. (You can always use "make -n"
476 to see the options that are used).
479 For testing, generate functions for certain macros to make them visible
480 as such to the debugger. See also the --disable-macros option.
483 Extend the cchar_t structure to allow more than 16 colors to be
484 encoded. This applies only to the wide-character (--enable-widec)
487 NOTE: using this option will make libraries which are not binary-
488 compatible with libncursesw 5.4. None of the interfaces change, but
489 applications which have an array of cchar_t's must be recompiled.
492 Modify the encoding of mouse state to make room for a 5th mouse button.
493 That allows one to use ncurses with a wheel mouse with xterm or
494 similar X terminal emulators.
496 NOTE: using this option will make libraries which are not binary-
497 compatible with libncursesw 5.4. None of the interfaces change, but
498 applications which have mouse mask mmask_t's must be recompiled.
501 Use the 4.4BSD getcap code if available, or a bundled version of it to
502 fetch termcap entries. Entries read in this way cannot use (make
503 cross-references to) the terminfo tree, but it is faster than reading
506 If configured for one of the *BSD systems, this automatically uses
507 the hashed database system produced using cap_mkdb or similar tools.
508 In that case, there is no advantage in using the --enable-getcap-cache
511 See also the --with-hashed-db option.
513 --enable-getcap-cache
514 Cache translated termcaps under the directory $HOME/.terminfo
516 NOTE: this sounds good - it makes ncurses run faster the second time.
517 But look where the data comes from - an /etc/termcap containing lots of
518 entries that are not up to date. If you configure with this option and
519 forget to install the terminfo database before running an ncurses
520 application, you will end up with a hidden terminfo database that
521 generally does not support color and will miss some function keys.
524 Compile-in cursor-optimization code that uses hard-tabs. We would make
525 this a standard feature except for the concern that the terminfo entry
526 may not be accurate, or that your stty settings have disabled the use
530 Compile-in experimental interop bindings. These provide generic types
531 for the form-library.
534 Controls whether the filesystem on which the terminfo database resides
535 supports mixed-case filenames (normal for UNIX, but not on other
536 systems). If you do not specify this option, the configure script
537 checks the current filesystem.
540 Compile-in support for the $NCURSES_NO_PADDING environment variable,
541 which allows you to suppress the effect of non-mandatory padding in
542 terminfo entries. This is the default, unless you have disabled the
546 If pkg-config is found (see --with-pkg-config), generate ".pc" files
547 for each of the libraries, and install them in pkg-config's library
550 --enable-pthreads-eintr
551 add logic in threaded configuration to ensure that a read(2) system
552 call can be interrupted for SIGWINCH.
555 Compile experimental configuration which improves reentrant use of the
556 library by reducing global and static variables. This option is also
557 set if --with-pthread is used.
559 Enabling this option adds a "t" to the library names, except for the
560 special case when --enable-weak-symbols is also used.
563 Use rpath option when generating shared libraries, and (with some
564 restrictions) when linking the corresponding programs. This originally
565 (in 1997) applied mainly to systems using the GNU linker (read the
568 More recently it is useful for systems that require special treatment
569 shared libraries in "unusual" locations. The "system" libraries reside
570 in directories which are on the loader's default search-path. While
571 you may be able to use workarounds such as the $LD_LIBRARY_PATH
572 environment variable, they do not work with setuid applications since
573 the LD_LIBRARY_PATH variable would be unset in that situation.
575 This option does not apply to --with-libtool, since libtool makes
576 extra assumptions about rpath.
578 --enable-safe-sprintf
579 Compile with experimental safe-sprintf code. You may consider using
580 this if you are building ncurses for a system that has neither
581 vsnprintf() or vsprintf(). It is slow, however.
584 Compile support for ncurses' SIGWINCH handler. If your application has
585 its own SIGWINCH handler, ncurses will not use its own. The ncurses
586 handler causes wgetch() to return KEY_RESIZE when the screen-size
587 changes. This option is the default, unless you have disabled the
591 The term.h header declares a Booleans[] array typed "char". But it
592 stores signed values there and "char" is not necessarily signed.
593 Some packagers choose to alter the type of Booleans[] though this
594 is not strictly compatible. This option allows one to implement this
595 alteration without patching the source code.
598 Compile-in support for extended functions which accept a SCREEN pointer,
599 reducing the need for juggling the global SP value with set_term() and
602 --enable-string-hacks
603 Controls whether strlcat and strlcpy may be used. The same issue
604 applies to OpenBSD's warnings about snprintf, noting that this function
605 is weakly standardized.
607 Aside from stifling these warnings, there is no functional improvement
611 If your system supports symbolic links, make tic use symbolic links
612 rather than hard links to save diskspace when writing aliases in the
616 Compile-in support for user-definable terminal capabilities. Use the
617 -x option of tic and infocmp to treat unrecognized terminal
618 capabilities as user-defined strings. This option is the default,
619 unless you have disabled the extended functions.
622 Enable experimental terminal-driver. This is currently used for the
623 MinGW port, by providing a way to substitute the low-level terminfo
624 library with different terminal drivers.
627 Compile in support for reading terminal descriptions from termcap if no
628 match is found in the terminfo database. See also the --enable-getcap
629 and --enable-getcap-cache options.
631 Termcap support requires run-time parsing rather than loading
632 predigested data. If you have specified --with-ticlib, then you
633 cannot have termcap support since run-time parsing is done in the
634 tic library, which is intentionally not part of normal linkage
638 Turn on GCC compiler warnings. There should be only a few.
640 --enable-weak-symbols
641 If the --with-pthread option is set, check if the compiler supports
642 weak-symbols. If it does, then name the thread-capable library without
643 the "t" (libncurses rather than libncursest), and provide for
644 dynamically loading the pthreads entrypoints at runtime. This allows
645 one to reduce the number of library files for ncurses.
647 --enable-wgetch-events
648 Compile with experimental wgetch-events code. See ncurses/README.IZ
651 Compile with wide-character code. This makes a different version of
652 the libraries (e.g., libncursesw.so), which stores characters as
655 NOTE: applications compiled with this configuration are not compatible
656 with those built for 8-bit characters. You cannot simply make a
657 symbolic link to equate libncurses.so with libncursesw.so
659 NOTE: the Ada95 binding may be built against either version of the the
660 ncurses library, but you must decide which: the binding installs the
661 same set of files for either version. Currently (2002/6/22) it does
662 not use the extended features from the wide-character code, so it is
663 probably better to not install the binding for that configuration.
666 Compile-in support experimental xmc (magic cookie) code.
668 --with-abi-version=NUM
669 Override the ABI version, which is used in shared library filenames.
670 Normally this is the same as the release version; some ports have
671 special requirements for compatibility.
673 This option does not affect linking with libtool, which uses the
674 release major/minor numbers.
676 --with-ada-compiler=CMD
677 Specify the Ada95 compiler command (default "gnatmake")
679 --with-ada-include=DIR
680 Tell where to install the Ada includes (default:
681 PREFIX/lib/ada/adainclude)
683 --with-ada-objects=DIR
684 Tell where to install the Ada objects (default: PREFIX/lib/ada/adalib)
687 Build a shared library for Ada95 binding, if the compiler permits.
689 NOTE: You must also set the --with-shared option on some platforms
690 for a successful build. You need not use this option when you set
691 --with-shared, unless you want to use the Ada shared library.
694 If --without-cxx is specified, override the type used for the "bool"
695 declared in curses.h (normally the type is automatically chosen to
696 correspond with that in <stdbool.h>, or defaults to platform-specific
700 This option is provided by the same macro used for $BUILD_CC, etc.,
701 but is not directly used by ncurses.
704 If cross-compiling, specify a host C compiler, which is needed to
705 compile a few utilities which generate source modules for ncurses.
706 If you do not give this option, the configure script checks if the
707 $BUILD_CC variable is set, and otherwise defaults to gcc or cc.
709 --with-build-cflags=XXX
710 If cross-compiling, specify the host C compiler-flags. You might need
711 to do this if the target compiler has unusual flags which confuse the
714 You can also set the environment variable $BUILD_CFLAGS rather than
717 --with-build-cppflags=XXX
718 If cross-compiling, specify the host C preprocessor-flags. You might
719 need to do this if the target compiler has unusual flags which confuse
722 You can also set the environment variable $BUILD_CPPFLAGS rather than
725 --with-build-ldflags=XXX
726 If cross-compiling, specify the host linker-flags. You might need to
727 do this if the target linker has unusual flags which confuse the host
730 You can also set the environment variable $BUILD_LDFLAGS rather than
733 --with-build-libs=XXX
734 If cross-compiling, the host libraries. You might need to do this if
735 the target environment requires unusual libraries.
737 You can also set the environment variable $BUILD_LIBS rather than
741 Specify an alternate terminfo capabilities file, which makes the
742 configure script look for "include/Caps.XXX". A few systems, e.g.,
743 AIX 4.x use the same overall file-format as ncurses for terminfo
744 data, but use different alignments within the tables to support
745 legacy applications. For those systems, you can configure ncurses
746 to use a terminfo database which is compatible with the native
749 --with-ccharw-max=XXX
750 Override the size of the wide-character array in cchar_t structures.
751 Changing this will alter the binary interface. This defaults to 5.
754 Override type of chtype, which stores the video attributes and (if
755 --enable-widec is not given) a character. Prior to ncurses 5.5, this
756 was always unsigned long, but with ncurses 5.5, it may be unsigned.
757 Use this option if you need to preserve compatibility with 64-bit
758 executables, e.g., by setting "--with-chtype=long" (the configure
759 script supplies "unsigned").
762 When --with-shared is set, build libncurses++ as a shared library.
763 This implicitly relies upon building with gcc/g++, since other
764 compiler suites may have differences in the way shared libraries are
765 built. libtool by the way has similar limitations.
768 Specify the terminfo source file to install. Usually you will wish
769 to install ncurses' default (misc/terminfo.src). Certain systems
770 have special requirements, e.g, OS/2 EMX has a customized terminfo
774 For testing, compile and link with Conor Cahill's dbmalloc library.
775 This also sets the --disable-leaks option.
778 Generate debug-libraries (default). These are named by adding "_g"
779 to the root, e.g., libncurses_g.a
781 --with-default-terminfo-dir=XXX
782 Specify the default terminfo database directory. This is normally
783 DATADIR/terminfo, e.g., /usr/share/terminfo.
786 For testing, compile and link with Gray Watson's dmalloc library.
787 This also sets the --disable-leaks option.
790 Specify a list of fallback terminal descriptions which will be
791 compiled into the ncurses library. See CONFIGURING FALLBACK ENTRIES.
794 use Alessandro Rubini's GPM library to provide mouse support on the
795 Linux console. Prior to ncurses 5.5, this introduced a dependency on
798 Currently ncurses uses the dlsym() function to bind to the library at
799 runtime, so it is only necessary that the library be present when
800 ncurses is built, to obtain the filename (or soname) used in the
801 corresponding dlopen() call. If you give a value for this option,
804 --with-gpm=$HOME/tmp/test-gpm.so
806 that overrides the configure check for the soname.
808 See also --without-dlsym
810 --with-hashed-db[=XXX]
811 Use a hashed database for storing terminfo data rather than storing
812 each compiled entry in a separate binary file within a directory
815 In particular, this uses the Berkeley database 1.8.5 interface, as
816 provided by that and its successors db 2, 3, and 4. The actual
817 interface is slightly different in the successor versions of the
818 Berkeley database. The database should have been configured using
819 "--enable-compat185".
821 If you use this option for configuring ncurses, tic will only be able
822 to write entries in the hashed database. infocmp can still read
823 entries from a directory tree as well as reading entries from the
824 hashed database. To do this, infocmp determines whether the $TERMINFO
825 variable points to a directory or a file, and reads the directory-tree
826 or hashed database respectively.
828 You cannot have a directory containing both hashed-database and
829 filesystem-based terminfo entries.
831 Use the parameter value to give the install-prefix used for the
833 --with-hashed-db=/usr/local/BigBase
834 to find the corresponding include- and lib-directories under the
837 See also the --enable-getcap option.
839 --with-install-prefix=XXX
840 Allows you to specify an alternate location for installing ncurses
841 after building it. The value you specify is prepended to the "real"
842 install location. This simplifies making binary packages. The
843 makefile variable DESTDIR is set by this option. It is also possible
845 make install DESTDIR=XXX
846 since the makefiles pass that variable to subordinate makes.
848 NOTE: a few systems build shared libraries with fixed pathnames; this
849 option probably will not work for those configurations.
851 --with-lib-prefix=XXX
852 OS/2 EMX used a different naming convention from most Unix-like
853 platforms. It required that the "lib" part of a library name was
854 omitted. Newer EMX as part of eComStation does not follow that
855 convention. Use this option to override the configure script's
856 assumptions about the library-prefix. If this option is omitted, it
857 uses the original OS/2 EMX convention for that platform. Use
858 "--with-lib-prefix=lib" for the newer EMX in eComStation. Use
859 "--without-lib-prefix" to suppress it for other odd platforms.
862 Generate libraries with libtool. If this option is selected, then it
863 overrides all other library model specifications. Note that libtool
864 must already be installed, uses makefile rules dependent on GNU make,
865 and does not promise to follow the version numbering convention of
866 other shared libraries on your system. However, if the --with-shared
867 option does not succeed, you may get better results with this option.
869 If a parameter value is given, it must be the full pathname of the
870 particular version of libtool, e.g.,
871 /usr/bin/libtool-1.2.3
873 It is possible to rebuild the configure script to use the automake
874 macros for libtool, e.g., AC_PROG_LIBTOOL. See the comments in
875 aclocal.m4 for CF_PROG_LIBTOOL, and ensure that you build configure
876 using the appropriate patch for autoconf from
877 http://invisible-island.net/autoconf/
879 --with-manpage-aliases
880 Tell the configure script you wish to create entries in the
881 man-directory for aliases to manpages which list them, e.g., the
882 functions in the panel manpage. This is the default. You can disable
883 it if your man program does this. You can also disable
884 --with-manpage-symlinks to install files containing a ".so" command
885 rather than symbolic links.
887 --with-manpage-format=XXX
888 Tell the configure script how you would like to install man-pages. The
889 option value must be one of these: gzip, compress, BSDI, normal,
890 formatted. If you do not give this option, the configure script
891 attempts to determine which is the case.
893 --with-manpage-renames=XXX
894 Tell the configure script that you wish to rename the manpages while
895 installing. Currently the only distribution which does this is Debian.
896 The option value specifies the name of a file that lists the renamed
897 files, e.g., $srcdir/man/man_db.renames
899 --with-manpage-symlinks
900 Tell the configure script that you wish to make symbolic links in the
901 man-directory for aliases to the man-pages. This is the default, but
902 can be disabled for systems that provide this automatically. Doing
903 this on systems that do not support symbolic links will result in
904 copying the man-page for each alias.
907 Tell the configure script that you with to preprocess the manpages
908 by running them through tbl to generate tables understandable by
912 Override type of mmask_t, which stores the mouse mask. Prior to
913 ncurses 5.5, this was always unsigned long, but with ncurses 5.5, it
914 may be unsigned. Use this option if you need to preserve compatibility
915 with 64-bit executables.
918 Generate normal (i.e., static) libraries (default).
920 Note: on Linux, the configure script will attempt to use the GPM
921 library via the dlsym() function call. Use --without-dlsym to disable
922 this feature, or --without-gpm, depending on whether you wish to use
926 Override type of ospeed variable, which is part of the termcap
927 compatibility interface. In termcap, this is a 'short', which works
928 for a wide range of baudrates because ospeed is not the actual speed
929 but the encoded value, e.g., B9600 would be a small number such as 13.
930 However the encoding scheme originally allowed for values "only" up to
931 38400bd. A newer set of definitions past 38400bd is not encoded as
932 compactly, and is not guaranteed to fit into a short (see the function
933 cfgetospeed(), which returns a speed_t for this reason). In practice,
934 applications that required knowledge of the ospeed variable, i.e.,
935 those using termcap, do not use the higher speeds. Your application
936 (or system, in general) may or may not.
938 --with-pkg-config=[DIR]
939 Check for pkg-config, optionally specifying its path.
941 --with-pkg-config-libdir=[DIR]
942 If pkg-config was found, override the automatic check for its library
946 Generate profile-libraries These are named by adding "_p" to the root,
950 Link with POSIX threads, set --enable-reentrant. The use_window() and
951 use_screen() functions will use mutex's, allowing rudimentary support
952 for multithreaded applications.
955 Compile-in RCS identifiers. Most of the C files have an identifier.
957 --with-rel-version=NUM
958 Override the release version, which may be used in shared library
959 filenames. This consists of a major and minor version number separated
960 by ".". Normally the major version number is the same as the ABI
961 version; some ports have special requirements for compatibility.
964 Generate shared-libraries. The names given depend on the system for
965 which you are building, typically using a ".so" suffix, along with
966 symbolic links that refer to the release version.
968 NOTE: Unless you override the configure script by setting the $CFLAGS
969 environment variable, these will not be built with the -g debugging
972 NOTE: For some configurations, e.g., installing a new version of
973 ncurses shared libraries on a machine which already has ncurses
974 shared libraries, you may encounter problems with the linker.
975 For example, it may prevent you from running the build tree's
976 copy of tic (for installing the terminfo database) because it
977 loads the system's copy of the ncurses shared libraries. In that
978 case, using the misc/shlib script may be helpful, since it sets
979 $LD_LIBRARY_PATH to point to the build tree, e.g.,
980 ./misc/shlib make install
982 NOTE: If you use the --with-ada-sharedlib option, you should also
983 set this option, to ensure that C-language modules needed for the
984 Ada binding use appropriate compiler options.
986 --with-shlib-version=XXX
987 Specify whether to use the release or ABI version for shared libraries.
988 This is normally chosen automatically based on the type of system
989 which you are building on. We use it for testing the configure script.
992 use FreeBSD sysmouse interface provide mouse support on the console.
994 --with-system-type=XXX
995 For testing, override the derived host system-type which is used to
996 decide things such as the linker commands used to build shared
997 libraries. This is normally chosen automatically based on the type of
998 system which you are building on. We use it for testing the configure
1001 --with-terminfo-dirs=XXX
1002 Specify a search-list of terminfo directories which will be compiled
1003 into the ncurses library (default: DATADIR/terminfo)
1005 --with-termlib[=XXX]
1006 When building the ncurses library, organize this as two parts: the
1007 curses library (libncurses) and the low-level terminfo library
1008 (libtinfo). This is done to accommodate applications that use only
1009 the latter. The terminfo library is about half the size of the total.
1011 If an option value is given, that overrides the name of the terminfo
1012 library. For instance, if the wide-character version is built, the
1013 terminfo library would be named libtinfow. But the libtinfow interface
1014 is upward compatible from libtinfo, so it would be possible to overlay
1015 libtinfo.so with a "wide" version of libtinfow.so by renaming it with
1019 Specify a search-list of termcap files which will be compiled into the
1020 ncurses library (default: /etc/termcap:/usr/share/misc/termcap)
1023 When building the ncurses library, build a separate library for
1024 the modules that are used only by the utility programs. Normally
1025 those would be bundled with the termlib or ncurses libraries.
1027 If an option value is given, that overrides the name of the tic
1028 library. As in termlib, there is no ABI difference between the
1029 "wide" libticw.so and libtic.so
1031 NOTE: Overriding the name of the tic library may be useful if you are
1032 also using the --with-termlib option to rename libtinfo. If you are
1033 not doing that, renaming the tic library can result in conflicting
1034 library dependencies for tic and other programs built with the tic
1037 --with-tparm-arg[=XXX]
1038 Override the type used for tparm() arguments, which normally is a
1039 "long". However the function must assume that its arguments can hold a
1040 pointer to char's which is not always workable for 64-bit platforms. A
1041 better choice would be intptr_t, which was not available at the time
1042 tparm's interface was defined.
1044 If the option is not given, this defaults to "long".
1047 Configure the trace() function as part of the all models of the ncurses
1048 library. Normally it is part of the debug (libncurses_g) library only.
1050 --with-xterm-kbs=XXX
1051 Configure xterm's terminfo entries to use either BS (^H, i.e., ASCII
1052 backspace) or DEL (^?, or 127). XXX can be BS (or bs, 8) or DEL
1055 During installation, the makefile and scripts modifies the "xterm+kbs"
1056 terminfo entry to use this setting.
1059 For testing, compile with debug option.
1060 This also sets the --disable-leaks option.
1062 --with-wrap-prefix=XXX
1063 When using the --enable-reentrant option, ncurses redefines variables
1064 that would be global in curses, e.g., LINES, as a macro that calls a
1065 "wrapping" function which fetches the data from the current SCREEN
1066 structure. Normally that function is named by prepending "_nc_" to the
1067 variable's name. The function is technically private (since portable
1068 applications would not refer directly to it). But according to one
1069 line of reasoning, it is not the same type of "private" as functions
1070 which applications should not call even via a macro. This configure
1071 option lets you choose the prefix for these wrapped variables.
1074 Suppress the configure script's check for Ada95, do not build the
1075 Ada95 binding and related demo.
1078 Don't install the ncurses header with the name "curses.h". Rather,
1079 install as "ncurses.h" and modify the installed headers and manpages
1082 Likewise, do not install an alias "curses" for the ncurses manpage.
1085 XSI curses declares "bool" as part of the interface. C++ also declares
1086 "bool". Neither specifies the size and type of booleans, but both
1087 insist on the same name. We chose to accommodate this by making the
1088 configure script check for the size and type (e.g., unsigned or signed)
1089 that your C++ compiler uses for booleans. If you do not wish to use
1090 ncurses with C++, use this option to tell the configure script to not
1091 adjust ncurses bool to match C++.
1093 --without-cxx-binding
1094 Suppress the configure script's check for C++, do not build the
1095 C++ binding and related demo.
1098 Disable development options. This does not include those that change
1099 the interface, such as --enable-widec.
1102 Do not use dlsym() to load GPM dynamically.
1105 Tell the configure script to suppress the install of ncurses' manpages.
1108 Tell the configure script to suppress the build of ncurses' application
1109 programs (e.g., tic). The test applications will still be built if you
1110 type "make", though not if you simply do "make install".
1113 Tell the configure script to suppress the build of ncurses' test
1117 Tell the configure script to use "xterm-old" for the entry used in
1118 the terminfo database. This will work with variations such as
1119 X11R5 and X11R6 xterm.
1122 COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
1123 --------------------------------------------
1125 Because ncurses implements the X/Open Curses Specification, its interface
1126 is fairly stable. That does not mean the interface does not change.
1127 Changes are made to the documented interfaces when we find differences
1128 between ncurses and X/Open or implementations which they certify (such as
1129 Solaris). We add extensions to those interfaces to solve problems not
1130 addressed by the original curses design, but those must not conflict with
1131 the X/Open documentation.
1133 Here are some of the major interface changes, and related problems which
1134 you may encounter when building a system with different versions of
1140 + add an alternate library configuration, i.e., "terminal driver" to
1141 support port to Windows, built with MinGW. There are two drivers
1142 (terminfo and Windows console). The terminfo driver works on other
1145 + add a new set of functions which accept a SCREEN* parameter, in
1146 contrast with the original set which use the global value "sp".
1147 By default, these names end with "_sp", and are otherwise
1148 functionally identical with the originals.
1150 In addition to the "_sp" functions, there are a few new functions
1151 associated with this feature: ceiling_panel, ground_panel,
1154 If the library is not built with the sp-funcs extension, there
1155 are no related interface changes.
1157 + add tiparm function based on review of X/Open Curses Issue 7.
1159 + change internal _nc_has_mouse function to public has_mouse function
1163 + add a few more functions to support the NCURSES_OPAQUE feature:
1164 get_escdelay, is_pad, is_subwin
1166 Added internal functions (other than "_sp" variants):
1175 _nc_retrace_int_attr_t
1181 Removed internal functions:
1182 _nc_makenew (some configurations replace by _nc_makenew_sp)
1184 Modified internal functions:
1191 5.7 (November 2, 2008)
1194 + generate linkable stubs for some macros:
1197 + Add new library configuration for tic-library (the non-curses portion
1198 of the ncurses library used for the tic program as well as some
1199 others such as tack. There is no API change, but makefiles would be
1200 changed to use the tic-library built separately.
1202 tack, distributed separately from ncurses, uses some of the internal
1203 _nc_XXX functions, which are declared in the tic.h header file.
1205 The reason for providing this separate library is that none of the
1206 functions in it are suitable for threaded applications.
1208 + Add new library configuration (ncursest, ncurseswt) which provides
1209 rudimentary support for POSIX threads. This introduces opaque
1210 access functions to the WINDOW structure and adds a parameter to
1211 several internal functions.
1213 + move most internal variables (except tic-library) into data blocks
1214 _nc_globals and _nc_prescreen to simplify analysis. Those were
1215 globally accessible, but since they were not part of the documented
1216 API, there is no ABI change.
1218 + changed static tables of strings to be indices into long strings, to
1219 improve startup performance. This changes parameter lists for some
1220 of the internal functions.
1224 + add NCURSES_OPAQUE definition in curses.h to control whether internal
1225 details of the WINDOW structure are visible to an application. This
1226 is always defined when the threaded library is built, and is optional
1227 otherwise. New functions for this: is_cleared, is_idcok, is_idlok,
1228 is_immedok, is_keypad, is_leaveok, is_nodelay, is_notimeout,
1229 is_scrollok, is_syncok, wgetparent and wgetscrreg.
1231 + the threaded library (ncursest) also disallows direct updating of
1232 global curses-level variables, providing functions (via macros) for
1233 obtaining their value. A few of those variables can be modified by
1234 the application, using new functions: set_escdelay, set_tabsize
1236 + added functions use_window() and use_screen() which wrap a mutex
1237 (if threading is configured) around a call to a user-supplied
1240 Added internal functions:
1251 These are used for leak-testing, and are stubs for
1252 ABI compatibility when ncurses is not configured for that
1253 using the --disable-leaks configure script option:
1258 Removed internal functions:
1261 Modified internal functions:
1267 _nc_locale_breaks_acs
1269 _nc_update_screensize
1271 Use new typedef TRIES to replace "struct tries":
1279 5.6 (December 17, 2006)
1282 + generate linkable stubs for some macros:
1284 getbegx, getbegy, getcurx, getcury, getmaxx, getmaxy, getparx,
1287 and (for libncursesw)
1295 Added internal functions:
1309 Also (if using the hashed database configuration):
1324 Removed internal functions:
1327 Modified internal functions:
1334 5.5 (October 10, 2005)
1337 + terminfo installs "xterm-new" as "xterm" entry rather than
1338 "xterm-old" (aka xterm-r6).
1340 + terminfo data is installed using the tic -x option (few systems
1341 still use ncurses 4.2).
1343 + modify C++ binding to work with newer C++ compilers by providing
1344 initializers and using modern casts. Old-style header names are
1345 still used in this release to allow compiling with not-so-old
1348 + form and menu libraries now work with wide-character data.
1349 Applications which bypassed the form library and manipulated the
1350 FIELD.buf data directly will not work properly with libformw, since
1351 that no longer points to an array of char. The set_field_buffer()
1352 and field_buffer() functions translate to/from the actual field
1355 + change SP->_current_attr to a pointer, adjust ifdef's to ensure that
1356 libtinfo.so and libtinfow.so have the same ABI. The reason for this
1357 is that the corresponding data which belongs to the upper-level
1358 ncurses library has a different size in each model.
1360 + winnstr() now returns multibyte character strings for the
1361 wide-character configuration.
1363 + assume_default_colors() no longer requires that use_default_colors()
1366 + data_ahead() now works with wide-characters.
1368 + slk_set() and slk_wset() now accept and store multibyte or
1369 multicolumn characters.
1371 + start_color() now returns OK if colors have already been started.
1372 start_color() also returns ERR if it cannot allocate memory.
1374 + pair_content() now returns -1 for consistency with init_pair() if it
1375 corresponds to the default-color.
1377 + unctrl() now returns null if its parameter does not correspond
1378 to an unsigned char.
1381 Experimental mouse version 2 supports wheel mice with buttons
1382 4 and 5. This requires ABI 6 because it modifies the encoding
1385 Experimental extended colors allows encoding of 256 foreground
1386 and background colors, e.g., with the xterm-256color or
1387 xterm-88color terminfo entries. This requires ABI 6 because
1388 it changes the size of cchar_t.
1390 Added internal functions:
1394 _nc_retrace_cvoid_ptr
1395 _nc_retrace_void_ptr
1398 Removed internal functions:
1401 Modified internal functions:
1406 5.4 (February 8, 2004)
1409 + add the remaining functions for X/Open curses wide-character support.
1410 These are only available if the library is configured using the
1411 --enable-widec option.
1415 + write getyx() and related 2-return macros in terms of getcury(),
1418 + simplify ifdef for bool declaration in curses.h
1420 + modify ifdef's in curses.h that disabled use of __attribute__() for
1421 g++, since recent versions implement the cases which ncurses uses.
1423 + change some interfaces to use const:
1435 Added internal functions:
1438 _nc_is_charable() wide
1439 _nc_locale_breaks_acs()
1442 _nc_to_widechar() wide
1444 _nc_trace_bufcat() debug
1445 _nc_unicode_locale()
1447 Removed internal functions:
1451 Modified internal functions:
1453 _nc_retrace_chtype()
1455 5.3 (October 12, 2002)
1458 + change type for bool used in headers to NCURSES_BOOL, which usually
1459 is the same as the compiler's definition for 'bool'.
1461 + add all but two functions for X/Open curses wide-character support.
1462 These are only available if the library is configured using the
1463 --enable-widec option. Missing functions are
1467 + add environment variable $NCURSES_ASSUMED_COLORS to modify the
1468 assume_default_colors() extension.
1474 Added internal functions:
1475 _nc_altcharset_name() debug
1477 _nc_retrace_bool() debug
1478 _nc_retrace_unsigned() debug
1480 _nc_trace_ttymode() debug
1485 Removed internal functions:
1488 Modified internal functions:
1491 5.2 (October 21, 2000)
1494 + revert termcap ospeed variable to 'short' (see discussion of the
1495 --with-ospeed configure option).
1500 + made the extended terminal capabilities
1501 (configure --enable-tcap-names) a standard feature. This should
1502 be transparent to applications that do not require it.
1504 + removed the trace() function and related trace support from the
1507 + modified curses.h.in, undef'ing some symbols to avoid conflict
1510 Added extensions: assume_default_colors().
1512 5.0 (October 23, 1999)
1515 + implemented the wcolor_set() and slk_color() functions.
1517 + move macro winch to a function, to hide details of struct ldat
1519 + corrected prototypes for slk_* functions, using chtype rather than
1522 + the slk_attr_{set,off,on} functions need an additional void*
1523 parameter according to XSI.
1525 + modified several prototypes to correspond with 1997 version of X/Open
1526 Curses: [w]attr_get(), [w]attr_set(), border_set() have different
1527 parameters. Some functions were renamed or misspelled:
1528 erase_wchar(), in_wchntr(), mvin_wchntr(). Some developers have used
1531 Added extensions: keybound(), curses_version().
1533 Terminfo database changes:
1535 + change translation for termcap 'rs' to terminfo 'rs2', which is
1536 the documented equivalent, rather than 'rs1'.
1538 The problems are subtler in recent releases.
1540 a) This release provides users with the ability to define their own
1541 terminal capability extensions, like termcap. To accomplish this,
1542 we redesigned the TERMTYPE struct (in term.h). Very few
1543 applications use this struct. They must be recompiled to work with
1546 a) If you use the extended terminfo names (i.e., you used configure
1547 --enable-tcap-names), the resulting terminfo database can have some
1548 entries which are not readable by older versions of ncurses. This
1549 is a bug in the older versions:
1551 + the terminfo database stores booleans, numbers and strings in
1552 arrays. The capabilities that are listed in the arrays are
1553 specified by X/Open. ncurses recognizes a number of obsolete and
1554 extended names which are stored past the end of the specified
1557 + a change to read_entry.c in 951001 made the library do an lseek()
1558 call incorrectly skipping data which is already read from the
1559 string array. This happens when the number of strings in the
1560 terminfo data file is greater than STRCOUNT, the number of
1561 specified and obsolete or extended strings.
1563 + as part of alignment with the X/Open final specification, in the
1564 990109 patch we added two new terminfo capabilities:
1565 set_a_attributes and set_pglen_inch). This makes the indices for
1566 the obsolete and extended capabilities shift up by 2.
1568 + the last two capabilities in the obsolete/extended list are memu
1569 and meml, which are found in most terminfo descriptions for xterm.
1571 When trying to read this terminfo entry, the spurious lseek()
1572 causes the library to attempt to read the final portion of the
1573 terminfo data (the text of the string capabilities) 4 characters
1574 past its starting point, and reads 4 characters too few. The
1575 library rejects the data, and applications are unable to
1576 initialize that terminal type.
1578 FIX: remove memu and meml from the xterm description. They are
1579 obsolete, not used by ncurses. (It appears that the feature was
1580 added to xterm to make it more like hpterm).
1582 This is not a problem if you do not use the -x option of tic to
1583 create a terminfo database with extended names. Note that the
1584 user-defined terminal capabilities are not affected by this bug,
1585 since they are stored in a table after the older terminfo data ends,
1586 and are invisible to the older libraries.
1588 c) Some developers did not wish to use the C++ binding, and used the
1589 configure --without-cxx option. This causes problems if someone
1590 uses the ncurses library from C++ because that configure test
1591 determines the type for C++'s bool and makes ncurses match it, since
1592 both C++ and curses are specified to declare bool. Calling ncurses
1593 functions with the incorrect type for bool will cause execution
1594 errors. In 5.0 we added a configure option "--without-cxx-binding"
1595 which controls whether the binding itself is built and installed.
1600 + correct prototype for termattrs() as per XPG4 version 2.
1602 + add placeholder prototypes for color_set(), erasewchar(),
1603 term_attrs(), wcolor_set() as per XPG4 version 2.
1605 + add macros getcur[xy] getbeg[xy] getpar[xy], which are defined in
1608 New extensions: keyok() and define_key().
1610 Terminfo database changes:
1612 + corrected definition in curses.h for ACS_LANTERN, which was 'I'
1617 We added these extensions: use_default_colors(). Also added
1618 configure option --enable-const, to support the use of const where
1619 X/Open should have, but did not, specify.
1621 The terminfo database content changed the representation of color for
1622 most entries that use ANSI colors. SVr4 curses treats the setaf/setab
1623 and setf/setb capabilities differently, interchanging the red/blue
1624 colors in the latter.
1626 4.0 (December 24, 1996)
1628 We bumped to version 4.0 because the newly released Linux dynamic
1629 loader (ld.so.1.8.5) did not load shared libraries whose ABI and REL
1630 versions were inconsistent. At that point, ncurses ABI was 3.4 and the
1631 REL was 1.9.9g, so we made them consistent.
1633 1.9.9g (December 1, 1996)
1635 This fixed most of the problems with 1.9.9e, and made these interface
1638 + remove tparam(), which had been provided for compatibility with
1639 some termcap. tparm() is standard, and does not conflict with
1640 application's fallback for missing tparam().
1642 + turn off hardware echo in initscr(). This changes the sense of the
1643 echo() function, which was initialized to echoing rather than
1644 nonechoing (the latter is specified). There were several other
1645 corrections to the terminal I/O settings which cause applications to
1648 + implemented several functions (such as attr_on()) which were
1649 available only as macros.
1651 + corrected several typos in curses.h.in (i.e., the mvXXXX macros).
1653 + corrected prototypes for delay_output(),
1654 has_color, immedok() and idcok().
1656 + corrected misspelled getbkgd(). Some applications used the
1659 + added _yoffset to WINDOW. The size of WINDOW does not impact
1660 applications, since they use only pointers to WINDOW structs.
1662 These changes were made to the terminfo database:
1664 + removed boolean 'getm' which was available as an extended name.
1666 We added these extensions: wresize(), resizeterm(), has_key() and
1669 1.9.9e (March 24, 1996)
1671 not recommended (a last-minute/untested change left the forms and
1672 menus libraries unusable since they do not repaint the screen).
1673 Foreground/background colors are combined incorrectly, working properly
1674 only on a black background. When this was released, the X/Open
1675 specification was available only in draft form.
1677 Some applications (such as lxdialog) were "fixed" to work with the
1678 incorrect color scheme.
1681 IF YOU ARE A SYSTEM INTEGRATOR:
1682 ------------------------------
1684 Configuration and Installation:
1686 On platforms where ncurses is assumed to be installed in /usr/lib,
1687 the configure script uses "/usr" as a default:
1689 GNU/Linux, FreeBSD, NetBSD, OpenBSD, Cygwin
1691 For other platforms, the default is "/usr/local". See the discussion
1692 of the "--disable-overwrite" option.
1694 The location of the terminfo is set indirectly by the "--datadir"
1695 configure option, e.g., /usr/share/terminfo, given a datadir of
1696 /usr/share. You may want to override this if you are installing
1697 ncurses libraries in nonstandard locations, but wish to share the
1700 Normally the ncurses library is configured in a pure-terminfo mode;
1701 that is, with the --disable-termcap option. This makes the ncurses
1702 library smaller and faster. The ncurses library includes a termcap
1703 emulation that queries the terminfo database, so even applications that
1704 use raw termcap to query terminal characteristics will win (providing
1705 you recompile and relink them!).
1707 If you must configure with termcap fallback enabled, you may also wish
1708 to use the --enable-getcap option. This speeds up termcap-based
1709 startups, at the expense of not allowing personal termcap entries to
1710 reference the terminfo tree. See comments in
1711 ncurses/tinfo/read_termcap.c for further details.
1713 Note that if you have $TERMCAP set, ncurses will use that value
1714 to locate termcap data. In particular, running from xterm will
1715 set $TERMCAP to the contents of the xterm's termcap entry.
1716 If ncurses sees that, it will not examine /etc/termcap.
1720 The terminfo file assumes that Shift-Tab generates \E[Z (the ECMA-48
1721 reverse-tabulation sequence) rather than ^I. Here are the loadkeys -d
1722 mappings that will set this up:
1724 keycode 15 = Tab Tab
1725 alt keycode 15 = Meta_Tab
1726 shift keycode 15 = F26
1727 string F26 ="\033[Z"
1729 Naming the Console Terminal
1731 In various systems there has been a practice of designating the system
1732 console driver type as `console'. Please do not do this! It
1733 complicates peoples' lives, because it can mean that several different
1734 terminfo entries from different operating systems all logically want to
1735 be called `console'.
1737 Please pick a name unique to your console driver and set that up
1738 in the /etc/inittab table or local equivalent. Send the entry to the
1739 terminfo maintainer (listed in the misc/terminfo file) to be included
1740 in the terminfo file, if it's not already there. See the
1741 term(7) manual page included with this distribution for more on
1742 conventions for choosing type names.
1744 Here are some recommended primary console names:
1746 linux -- Linux console driver
1751 If you are responsible for integrating ncurses for one of these
1752 distributions, please either use the recommended name or get back
1753 to us explaining why you don't want to, so we can work out nomenclature
1754 that will make users' lives easier rather than harder.
1757 RECENT XTERM VERSIONS:
1758 ---------------------
1760 The terminfo database file included with this distribution assumes you
1761 are running a modern xterm based on XFree86 (i.e., xterm-new). The
1762 earlier X11R6 entry (xterm-r6) and X11R5 entry (xterm-r5) is provided
1763 as well. See the --without-xterm-new configure script option if you
1764 are unable to update your system.
1767 CONFIGURING FALLBACK ENTRIES:
1768 ----------------------------
1770 In order to support operation of ncurses programs before the terminfo
1771 tree is accessible (that is, in single-user mode or at OS installation
1772 time) the ncurses library can be compiled to include an array of
1773 pre-fetched fallback entries. This must be done on a machine which
1774 has ncurses' infocmp and terminfo database installed (as well as
1775 ncurses' tic and infocmp programs).
1777 These entries are checked by setupterm() only when the conventional
1778 fetches from the terminfo tree and the termcap fallback (if configured)
1779 have been tried and failed. Thus, the presence of a fallback will not
1780 shadow modifications to the on-disk entry for the same type, when that
1781 entry is accessible.
1783 By default, there are no entries on the fallback list. After you have
1784 built the ncurses suite for the first time, you can change the list
1785 (the process needs infocmp(1)). To do so, use the script
1786 ncurses/tinfo/MKfallback.sh. The configure script option
1787 --with-fallbacks does this (it accepts a comma-separated list of the
1788 names you wish, and does not require a rebuild).
1790 If you wanted (say) to have linux, vt100, and xterm fallbacks, you
1791 might use the commands
1794 tinfo/MKfallback.sh \
1796 ../misc/terminfo.src \
1798 linux vt100 xterm >fallback.c
1800 The first three parameters of the script are normally supplied by
1801 the configured makefiles via the "--with-fallbacks" option. They
1804 1) the location of the terminfo database
1805 2) the source for the terminfo entries
1806 3) the location of the tic program, used to create a terminfo
1809 Then just rebuild and reinstall the library as you would normally.
1810 You can restore the default empty fallback list with
1812 tinfo/MKfallback.sh \
1814 ../misc/terminfo.src \
1818 The overhead for an empty fallback list is one trivial stub function.
1819 Any non-empty fallback list is const-ed and therefore lives in sharable
1820 text space. You can look at the comment trailing each initializer in
1821 the generated ncurses/fallback.c file to see the core cost of the
1822 fallbacks. A good rule of thumb for modern vt100-like entries is that
1823 each one will cost about 2.5K of text space.
1826 BSD CONVERSION NOTES:
1827 --------------------
1829 If you need to support really ancient BSD programs, you probably
1830 want to configure with the --enable-bsdpad option. What this does
1831 is enable code in tputs() that recognizes a numeric prefix on a
1832 capability as a request for that much trailing padding in milliseconds.
1833 There are old BSD programs that do things like tputs("50").
1835 (If you are distributing ncurses as a support-library component of
1836 an application you probably want to put the remainder of this section
1837 in the package README file.)
1839 The following note applies only if you have configured ncurses with
1842 ------------------------------- CUT HERE --------------------------------
1844 If you are installing this application privately (either because you
1845 have no root access or want to experiment with it before doing a root
1846 installation), there are a couple of details you need to be aware of.
1847 They have to do with the ncurses library, which uses terminfo rather
1848 than termcap for describing terminal characteristics.
1850 Though the ncurses library is terminfo-based, it will interpret your
1851 TERMCAP variable (if present), any local termcap files you reference
1852 through it, and the system termcap file. However, in order to avoid
1853 slowing down your application startup, it will only do this once per
1856 The first time you load a given terminal type from your termcap
1857 database, the library initialization code will automatically write it
1858 in terminfo format to a subdirectory under $HOME/.terminfo. After
1859 that, the initialization code will find it there and do a (much
1860 faster) terminfo fetch.
1862 Usually, all this means is that your home directory will silently grow
1863 an invisible .terminfo subdirectory which will get filled in with
1864 terminfo descriptions of terminal types as you invoke them. If anyone
1865 ever installs a global terminfo tree on your system, this will quietly
1866 stop happening and your $HOME/.terminfo will become redundant.
1868 The objective of all this logic is to make converting from BSD termcap
1869 as painless as possible without slowing down your application (termcap
1870 compilation is expensive).
1872 If you don't have a TERMCAP variable or custom personal termcap file,
1873 you can skip the rest of this dissertation.
1875 If you *do* have a TERMCAP variable and/or a custom personal termcap file
1876 that defines a terminal type, that definition will stop being visible
1877 to this application after the first time you run it, because it will
1878 instead see the terminfo entry that it wrote to $HOME/terminfo the
1881 Subsequently, editing the TERMCAP variable or personal TERMCAP file
1882 will have no effect unless you explicitly remove the terminfo entry
1883 under $HOME/terminfo. If you do that, the entry will be recompiled
1884 from your termcap resources the next time it is invoked.
1886 To avoid these complications, use infocmp(1) and tic(1) to edit the
1887 terminfo directory directly.
1889 ------------------------------- CUT HERE --------------------------------
1891 USING NCURSES WITH AFS:
1892 AFS treats each directory as a separate logical filesystem, you
1893 can't hard-link across them. The --enable-symlinks option copes
1894 with this by making tic use symbolic links.
1896 USING NCURSES WITH GPM:
1897 Ncurses 4.1 and up can be configured to use GPM (General Purpose Mouse)
1898 which is used with Linux console. Be aware that GPM is commonly
1899 installed as a shared library which contains a wrapper for the curses
1900 wgetch() function (libcurses.o). Some integrators have simplified
1901 linking applications by combining all or part of libcurses.so into the
1902 libgpm.so file, producing symbol conflicts with ncurses (specifically
1903 the wgetch function). This was originally the BSD curses, but
1904 generally whatever curses library exists on the system.
1906 You may be able to work around this problem by linking as follows:
1908 cc -o foo foo.o -lncurses -lgpm -lncurses
1910 but the linker may not cooperate, producing mysterious errors.
1911 See the FAQ, as well as the discussion under the --with-gpm option:
1913 http://invisible-island.net/ncurses/ncurses.faq.html#using_gpm_lib
1915 BUILDING NCURSES WITH A CROSS-COMPILER
1916 Ncurses can be built with a cross-compiler. Some parts must be built
1917 with the host's compiler since they are used for building programs
1918 (e.g., ncurses/make_hash and ncurses/make_keys) that generate tables
1919 that are compiled into the ncurses library. The essential thing to do
1920 is set the BUILD_CC environment variable to your host's compiler, and
1921 run the configure script configuring for the cross-compiler.
1923 The configure options --with-build-cc, etc., are provided to make this
1924 simpler. Since make_hash and make_keys use only ANSI C features, it
1925 is normally not necessary to provide the other options such as
1926 --with-build-libs, but they are provided for completeness.
1928 Note that all of the generated source-files which are part of ncurses
1929 will be made if you use
1933 This would be useful in porting to an environment which has little
1934 support for the tools used to generate the sources, e.g., sed, awk and
1937 When ncurses has been successfully cross-compiled, you may want to use
1938 "make install" (with a suitable target directory) to construct an
1939 install tree. Note that in this case (as with the --with-fallbacks
1940 option), ncurses uses the development platform's tic to do the
1941 "make install.data" portion.
1943 The system's tic program is used to install the terminal database,
1944 even for cross-compiles. For best results, the tic program should
1945 be from the most current version of ncurses.
1948 Send any feedback to the ncurses mailing list at
1949 bug-ncurses@gnu.org. To subscribe send mail to
1950 bug-ncurses-request@gnu.org with body that reads:
1951 subscribe ncurses <your-email-address-here>
1953 The Hacker's Guide in the doc directory includes some guidelines
1954 on how to report bugs in ways that will get them fixed most quickly.