1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2023/08/12 20:21:29 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing (1-based),
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+rca2|ANSI relative cursor-addressing,
355 hpa=\E[%i%p1%dG, vpa=\E[%i%p1%dd,
356 ansi+cup|ANSI absolute cursor-addressing,
357 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
358 ansi+rep|ANSI repeat-character,
359 rep=%p1%c\E[%p2%{1}%-%db,
360 ansi+idl1|ANSI insert/delete one line,
362 ansi+idl|ANSI insert/delete lines,
363 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
364 ansi+idc1|ANSI insert/delete one character,
365 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
366 ansi+idc|ANSI insert/delete characters,
367 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
368 ansi+arrows|ANSI normal-mode home and cursor-keys,
369 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
371 ansi+sgr|ANSI graphic renditions,
372 blink=\E[5m, invis=\E[8m, rev=\E[7m,
373 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
375 ansi+sgrso|ANSI standout only,
376 rmso=\E[m, smso=\E[7m,
377 ansi+sgrul|ANSI underline only,
378 rmul=\E[m, smul=\E[4m,
379 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
381 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
383 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
384 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
386 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
388 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
390 # ECMA-48 does not specify scroll-regions, but most people consider it to be
391 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
392 ansi+csr|ANSI scroll-region plus cursor save & restore,
393 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
395 # The normal (ANSI) flavor of "media copy" building block asserts that
396 # characters sent to the printer do not echo on the screen. DEC terminals
397 # can also be put into autoprinter mode, where each line is sent to the
398 # printer as you move off that line, e.g., by a carriage return.
399 ansi+pp|ANSI printer port,
401 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
402 dec+pp|DEC autoprinter mode,
403 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
405 # The IBM PC alternate character set. Plug this into any Intel console entry.
406 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
407 # ROM graphics for control characters such as the diamond, up- and down-arrow.
408 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
409 # will work with any Intel console, they all seem to have inherited \E[11m
410 # from the ANSI.SYS de-facto standard.
411 klone+acs|alternate character set for ansi.sys displays,
412 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
413 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
414 \301w\302x\263y\363z\362{\343|\330}\234~\376,
415 rmacs=\E[10m, smacs=\E[11m,
417 # Highlight controls corresponding to the ANSI.SYS standard. Most
418 # console drivers for Intel boxes obey these. Makes the same assumption
419 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
420 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
421 klone+sgr|attribute control for ansi.sys displays,
422 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
423 rmso=\E[m, rmul=\E[m,
424 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
426 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
429 # Most Intel boxes do not treat "invis" (invisible) text.
430 klone+sgr8|attribute control for ansi.sys displays with invis,
432 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
433 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
436 # Highlight controls corresponding to the ANSI.SYS standard. *All*
437 # console drivers for Intel boxes obey these. Does not assume \E[11m will
438 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
439 # diamond and arrow characters under curses.
440 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
441 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
443 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
444 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
445 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
448 # KOI8-R (RFC1489) acs (alternate character set)
449 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
450 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
451 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
452 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
453 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
455 rmacs=\E[10m, smacs=\E[11m,
457 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
458 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
459 # but equivalent strings that don't rely on that coincidence:
460 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
461 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
462 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
463 # They match a subset of ECMA-48.
464 klone+color|color control for ansi.sys and ISO6429-compatible displays,
465 colors#8, ncv#3, pairs#64,
466 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
468 # This is better than klone+color, it doesn't assume white-on-black as the
469 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
470 ecma+color|color control for ECMA-48-compatible terminals,
472 colors#8, ncv#3, pairs#64,
473 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
475 ecma+italics|ECMA-48 italics,
476 ritm=\E[23m, sitm=\E[3m,
478 # Attribute control for ECMA-48-compatible terminals
479 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
480 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
482 ecma+strikeout|ECMA-48 strikeout/crossed-out,
483 rmxx=\E[29m, smxx=\E[9m,
485 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
487 ecma+index|ECMA-48 scroll up/down,
488 indn=\E[%p1%dS, rin=\E[%p1%dT,
490 # For comparison, here are all the capabilities implied by the Intel
491 # Binary Compatibility Standard (level 2) that fit within terminfo.
492 # For more detail on this rather pathetic standard, see the comments
493 # near the end of this file.
494 ibcs2|Intel Binary Compatibility Standard prescriptions,
495 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
496 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
497 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
498 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
499 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
500 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
501 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
503 #### ANSI/ECMA-48 terminals and terminal emulators
505 # See near the end of this file for details on ANSI conformance.
506 # Don't mess with these entries! Lots of other entries depend on them!
508 # This section lists entries in a least-capable to most-capable order.
509 # if you're in doubt about what `ANSI' matches yours, try them in that
510 # order and back off from the first that breaks.
512 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
513 # and more than one page of memory. It uses local motions instead of
514 # direct cursor addressing, and makes almost no assumptions. It does
515 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
516 ansi-mr|mem rel cup ANSI,
518 cols#80, lines#24, use=vanilla, use=ansi+erase,
521 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
522 # beware of screen size problems and memory relative cursor addressing.
523 ansi-mini|any ANSI terminal with pessimistic assumptions,
525 cols#80, lines#24, use=vanilla, use=ansi+cup,
528 # ansi-mtabs adds relative addressing and minimal tab support
529 ansi-mtabs|any ANSI terminal with pessimistic assumptions (relative addressing),
531 ht=^I, use=ansi-mini, use=ansi+local1,
533 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
535 # The following is an entry for the full ANSI 3.64 (1977). It lacks
536 # padding, but most terminals using the standard are "fast" enough
537 # not to require any -- even at 9600 bps. If you encounter problems,
538 # try including the padding specifications.
540 # Note: the :as: and :ae: specifications are not implemented here, for
541 # the available termcap documentation does not make clear WHICH alternate
542 # character set to specify. ANSI 3.64 seems to make allowances for several.
543 # Please make the appropriate adjustments to fit your needs -- that is
544 # if you will be using alternate character sets.
546 # There are very few terminals running the full ANSI 3.64 standard,
547 # so I could only test this entry on one verified terminal (Visual 102).
548 # I would appreciate the results on other terminals sent to me.
550 # Please report comments, changes, and problems to:
552 # U.S. MAIL: Hugh Hansard
555 # Atlanta, GA. 30322.
557 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
559 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
560 ansi77|ANSI 3.64 standard 1977 version,
562 cols#80, it#8, lines#24,
563 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
564 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
565 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
566 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
567 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
568 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
569 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
570 smso=\E[7m, smul=\E[4m,
572 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
573 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
574 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
575 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
576 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
577 # to confuse many emulators. On the other hand, we can count on these programs
578 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
579 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
580 # ANSI.SYS influence.
581 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
582 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ANSI (mono mode),
584 cols#80, it#8, lines#24,
585 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
586 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
587 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
588 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
589 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
591 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
592 lines#25, use=pcansi-m,
593 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
594 lines#33, use=pcansi-m,
595 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
596 lines#43, use=pcansi-m,
597 # The color versions. All PC emulators do color...
598 pcansi|ibm-pc terminal programs claiming to be ANSI,
599 use=klone+color, use=pcansi-m,
600 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
601 lines#25, use=pcansi,
602 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
603 lines#33, use=pcansi,
604 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
605 lines#43, use=pcansi,
607 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
608 # If you want pound signs rather than dollars, replace `B' with `A'
609 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
610 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
611 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
613 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
614 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
615 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
616 ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
617 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
618 mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
619 s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
620 vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
622 # ECMA-48 addresses three of the four capabilities here:
625 # 8.3.14 CPR - ACTIVE POSITION REPORT
626 # Notation: (Pn1;Pn2) Representation: CSI Pn1;Pn2 05/02
627 # Parameter default values: Pn1 = 1; Pn2 = 1
630 # 8.3.35 DSR - DEVICE ST A TUS REPORT
631 # Notation: (Ps) Representation: CSI Ps 06/14
632 # Parameter default value: Ps = 0
633 # DSR is used either to report the status of the sending device or to
634 # request a status report from the receiving device, depending on the
636 # 6 a report of the active presentation position or of the active data
637 # position in the form of ACTIVE POSITION REPORT (CPR) is requested
640 # 8.3.24 DA - DEVICE ATTRIBUTES
641 # Notation: (Ps) Representation: CSI Ps 06/03
642 # Parameter default value: Ps = 0
643 # With a parameter value not equal to 0, DA is used to identify the
644 # device which sends the DA. The parameter value is a device type
645 # identification code according to a register which is to be established.
646 # If the parameter value is 0, DA is used to request an identifying DA
649 # DEC (and most "ANSI") terminals reply with a private-mode ("?") sequence,
650 # but that register "which is to be" in ECMA-48 was never established.
651 # For terminals that support DA1, a more specific u8 capability is preferred,
652 # except for those (such as xterm) which can be configured to return different
654 ansi+cpr|ncurses extension for ANSI CPR,
655 u6=\E[%i%d;%dR, u7=\E[6n,
656 ansi+enq|ncurses extension for ANSI ENQ,
657 u8=\E[?%[;0123456789]c, u9=\E[c, use=ansi+cpr,
658 # DEC terminals provided DECID, subsumed into DA1:
659 decid+cpr|ncurses extension for DECID,
660 u8=\E[?%[;0123456789]c, u9=\EZ, use=ansi+cpr,
662 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
663 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
664 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
665 ansi|ansi/pc-term compatible with color,
666 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
668 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
669 # all the normal ANSI stuff with no extensions. It assumes
670 # insert/delete line/char is there, so it won't work with
671 # VT100 clones. It assumes video attributes for bold, blink,
672 # underline, and reverse, which won't matter much if the terminal
673 # can't do some of those. Padding is assumed to be zero, which
674 # shouldn't hurt since xon/xoff is assumed.
675 ansi-generic|ansiterm|generic ANSI standard terminal,
677 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
678 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
679 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
680 use=ansi+sgrbold, use=ansi+arrows,
682 #### DOS ANSI.SYS variants
684 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
685 # documentation (except for the keyboard key reassignment feature, which
686 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
687 # though undocumented. The <pfkey> capability is untested but should work for
688 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
689 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
691 # DOS 2.0 (January 1983) documented these features in
692 # Chapter 13, "Using Extended Screen and Keyboard Control" -TD
693 ansi.sys-old|ANSI.SYS under PC-DOS 2.0,
694 OTbs, am, mir, msgr, xon,
696 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
697 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
698 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
699 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
700 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, use=ansi+cpr,
701 use=klone+color, use=klone+sgr8,
703 # Keypad: Home=\0G Up=\0H PrPag=\0I
704 # ka1,kh kcuu1 kpp,ka3
706 # Left=\0K 5=\0L Right=\0M
709 # End=\0O Down=\0P NxPag=\0Q
710 # kc1,kend kcud1 kc3,knp
715 # On keyboard with 12 function keys,
716 # shifted f-keys: F13-F24
717 # control f-keys: F25-F36
718 # alt f-keys: F37-F48
719 # The shift/control/alt keys do not modify each other, but alt overrides both,
720 # and control overrides shift.
722 # <pfkey> capability for F1-F48 -TD
723 ansi.sys|ANSI.SYS 3.1 and later versions,
724 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
725 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
726 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
727 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
728 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
729 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
730 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
731 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
732 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
733 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
734 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
735 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
736 pfkey=\E[0;%?%p1%{11}%<%t%':'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
737 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
738 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
742 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
743 # This should only be used when the terminal emulator cannot redefine the keys.
744 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
745 # definitions must be restored. If the terminal emulator is quit while in vi
746 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
747 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
748 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
749 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
750 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
751 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
752 # Consequently the End keypad key could not be set (it is relatively safe and
753 # actually useful because it sends ^@ O, which beeps and opens a line above).
754 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
755 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
756 \svi\s9-29-86\n\E[;75;8p,
757 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
758 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
759 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
760 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
763 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
764 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
765 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
766 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
769 # See ansi.sysk and nansi.sys above.
770 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
771 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
772 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
773 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
776 #### Atari ST terminals
778 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
780 tw52|tw52-color|Toswin window manager with color,
782 colors#16, pairs#0x100,
783 oc=\Eb?\Ec0, op=\Eb?\Ec0,
784 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
786 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
788 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
790 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
793 tw52-m|Toswin window manager monochrome,
796 bold=\Eya, dch1=\Ea, dim=\EyB,
797 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
798 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
799 smso=\EyQ, smul=\EyH, use=at-m,
800 tt52|Atari TT medium and high resolution,
801 lines#30, use=at-color,
802 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
804 colors#16, pairs#0x100,
805 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
806 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
807 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
808 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
809 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
811 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
812 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
813 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
814 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}
816 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
817 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
818 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
819 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
821 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
822 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
823 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e
824 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
827 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
829 cols#80, it#8, lines#24,
830 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
831 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
832 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
833 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
834 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
835 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
836 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
837 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
838 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
839 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
840 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
841 tw100|Toswin VT100 window manager,
843 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
844 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
846 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
847 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
848 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
849 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
850 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
851 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
852 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
853 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
854 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
855 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
856 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
857 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
858 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
859 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
860 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
861 rmso=\E[m, rmul=\E[m,
862 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
864 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
865 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
867 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
868 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
870 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
871 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
872 # The entries for stv52 and stv52pc probably need a revision.
873 stv52|MiNT virtual console,
875 cols#80, it#8, lines#30,
876 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
877 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
878 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
879 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
880 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
881 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
882 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
883 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
884 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
885 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
886 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
887 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
888 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
889 stv52pc|MiNT virtual console with PC charset,
891 cols#80, it#8, lines#30,
892 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
893 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
894 \363z\362{\343|\366}\234~\371,
895 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
896 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
897 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
898 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
899 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
900 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
901 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
902 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
903 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
904 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
905 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
906 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
909 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
912 cols#80, it#8, lines#25,
913 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
914 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
915 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
916 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
917 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
918 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
919 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
921 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base,
922 # MiNT VT52 emulation. 80 columns, 25 rows.
923 # MiNT is Now TOS, the operating system which comes with all Ataris now
924 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
925 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
926 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
927 st52-old|Atari ST with VT52 emulation,
930 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
931 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
932 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
933 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
934 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
935 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
936 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
937 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
938 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
943 # BeOS entry for Terminal program Seems to be almost ANSI
944 beterm|BeOS Terminal,
945 am, eo, mir, msgr, xenl, xon,
946 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
947 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
948 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
949 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
950 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
951 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
952 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
953 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
954 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
955 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
956 kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~,
957 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~,
958 kf8=\E[18~, kf9=\E[19~, kspd=^Z, nel=\r\n, op=\E[m, rc=\E8,
959 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m,
960 rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm,
961 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm,
962 setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h,
963 smkx=\E[?4h, smso=\E[7m, smul=\E[4m,
964 u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd,
970 # release 1.2.13: 1995/03
972 # This entry is good for the 1.2.13 or later version of the Linux console.
974 # ***************************************************************************
977 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
978 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
979 # * character. Here are the keymap replacement lines that will set this up: *
981 # keycode 15 = Tab Tab
982 # alt keycode 15 = Meta_Tab
983 # shift keycode 15 = F26
984 # string F26 ="\033[Z"
986 # * This has to use a key slot which is unfortunate (any unused one will *
987 # * do, F26 is the higher-numbered one). The change ought to be built *
988 # * into the kernel tables. *
990 # ***************************************************************************
992 # All linux kernels since 1.2.13 (at least) set the screen size
993 # themselves; this entry assumes that capability.
995 linux-basic|Linux console (basic),
996 am, bce, eo, mir, msgr, xenl, xon,
998 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
999 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1000 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1001 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1002 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1003 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1004 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1005 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1006 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1007 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1008 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1009 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
1010 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B,
1011 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1012 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
1013 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
1014 rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1015 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1016 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1017 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1018 vpa=\E[%i%p1%dd, use=vt220+pcedit, use=vt102+enq,
1019 use=klone+sgr, use=ecma+color, use=linux+sfkeys,
1021 linux+decid|ncurses extension for Linux console DECID,
1022 u8=\E[?6c, use=decid+cpr,
1024 linux+sfkeys|shifted function-keys for Linux console,
1025 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
1026 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
1028 linux-m|Linux console no color,
1030 setab@, setaf@, setb@, setf@, use=linux,
1032 # release 1.3: 1995/06
1034 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1035 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1036 # not supposedly back-portable to older SV curses (although it has worked fine
1037 # on Solaris for several years) and not supported in ncurses versions before
1039 linux-c-nc|Linux console with color-change,
1041 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1042 %02x%p4%{255}%*%{1000}%/%02x,
1043 oc=\E]R, use=linux-basic,
1044 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1045 linux-c|Linux console 1.3.6+ for older ncurses,
1047 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1048 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1049 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1050 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1051 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1052 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1053 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1054 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1056 oc=\E]R, use=linux-basic,
1058 # release 2.2: 1999/01
1060 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1061 # get a block cursor for cvvis.
1062 # reported by Frank Heckenbach <frank@g-n-u.de>.
1063 linux2.2|Linux 2.2.x console,
1064 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1065 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1067 # release 2.6: 2003/12 - 2004/12
1069 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1070 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1071 # Although the kernel has mappings for these, they were not in the default
1072 # font (tested with Debian and Fedora):
1079 # The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature
1080 # misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only
1081 # omits the line-drawing using SI/SO, but also part/all of the Unicode feature:
1083 # https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html
1084 # "This enables support for font mapping and Unicode translation on virtual consoles."
1086 # This mailing list thread in July 2008 illustrates:
1088 # https://marc.info/?t=121734656700005&r=1&w=4
1089 # "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1"
1091 # The change which made it configurable was to reduce the size for use in
1092 # embedded systems. Some background is found in
1094 # https://lwn.net/Articles/284767/
1095 # "An interview with the new embedded maintainers"
1096 linux2.6|Linux 2.6.x console,
1097 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1099 enacs=\E)0, rmacs=^O,
1100 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1101 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1102 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1104 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1105 # It is the same as xterm's erase-saved-lines feature.
1107 # Linux 3.0 was released in July 2011. The keyboard utilities (kbd) are
1108 # used for configuring its keyboard mappings.
1110 # kbd 1.14 was released before that (January 2008), but due to its placement
1111 # late in the Linux 2.6.x series had no immediate effect for most users. That
1112 # provided a default mapping for shift-tab to the (misnamed) Meta_Tab, i.e.,
1113 # the same as Alt-Tab.
1115 # The suggested mapping for the conventional \E[Z is provided in this entry as
1116 # an extended key to lessen user surprise -TD
1117 linux3.0|Linux 3.0 kernels,
1118 kcbt=\E^I, E3=\E[3J, kcbt2=\E[Z, use=linux2.6,
1120 # This is Linux console for ncurses.
1121 linux|Linux console,
1124 # Subject: linux 2.6.26 vt back_color_erase
1125 # Changes to the Linux console driver broke bce model as reported in
1126 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1128 # http://lkml.org/lkml/2008/4/26/305
1129 # http://lkml.org/lkml/2008/10/3/66
1130 linux2.6.26|Linux console w/o bce,
1133 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1134 linux-nic|Linux with ich/ich1 suppressed for non-curses programs,
1135 ich@, ich1@, use=linux,
1137 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1138 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1139 linux-koi8|Linux with koi8 alternate character set,
1140 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1141 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1142 \211w\210x\201y\230z\231{\267|\274~\224,
1143 use=linux, use=klone+koi8acs,
1145 # Another entry for KOI8-r with Qing Long's acsc.
1146 # (which one better complies with the standard?)
1147 linux-koi8r|Linux with koi8-r alternate character set,
1148 use=linux, use=klone+koi8acs,
1150 # Entry for the latin1 and latin2 fonts
1151 linux-lat|Linux with latin1 or latin2 alternate character set,
1152 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1153 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1154 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1157 # This uses graphics from VT codeset instead of from cp437.
1158 # reason: cp437 (aka "straight to font") is not functional under luit.
1159 # from: Andrey V Lukyanov <land@long.yar.ru>.
1160 linux-vt|Linux console using VT codes for graphics,
1161 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1163 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1166 # release: 0.3.9b 1997/01 to 2000/05
1168 # This is based on the Linux console (relies on the console to perform some
1169 # of the functionality), but does not recognize as many control sequences.
1170 # The program comes bundled with an old (circa 1998) copy of the Linux
1171 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1172 # \E* move cursor to home, as as \E[H
1174 # \EE move cursor to beginning of row
1175 # \E[y,xf same as \E[y,xH
1177 # Note: The status-line support is buggy (dsl does not work).
1178 kon|kon2|Kanji ON Linux console,
1179 am, bce, ccc, eo, eslok, hs, mir, msgr, xenl, xon,
1180 colors#8, it#8, ncv#18, pairs#64,
1181 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
1182 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
1183 \301w\302x\263y\363z\362{\343|\330}\234~\376,
1184 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1185 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1186 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1187 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1188 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1189 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
1190 dl1=\E[M, dsl=\E[?H\E[?E, ed=\E[J, el=\E[K, el1=\E[1K,
1191 fsl=\E[?F, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1192 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
1193 initc=\E]P%p1%x%p2%02x%p3%02x%p4%02x, invis=\E[8m,
1194 kb2=\E[G, kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1195 kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1196 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1197 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1198 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1199 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1200 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1201 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[37;40m,
1202 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
1203 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1204 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1205 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1206 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1207 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m,
1208 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[?T, u8=\E[?6c,
1209 vpa=\E[%i%p1%dd, use=ansi+enq,
1211 # release: 0.4.7 2005/05
1213 jfbterm|japanese framebuffer terminal,
1214 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1216 sgr0=\E[0m, use=kon,
1219 # Another variant. There are two parts (src, src/lib) with the latter
1220 # comprising the escape-sequence parsing. The copyright notice on that
1221 # says it is based on GTerm by Timothy Miller.
1223 # The original developer "dragchan" has left, but as of March 2017 there is
1224 # (still dead) code from May 2015 here:
1225 # https://github.com/izmntuk/fbterm
1227 # The acsc string may be incorrect.
1229 # Not used here, the program recognizes escapes for italic, underline and
1230 # dim, rendering those as green, cyan and gray respectively.
1231 fbterm|FbTerm for Linux with framebuffer,
1232 colors#0x100, pairs#0x10000,
1233 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1234 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1235 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1236 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1237 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1238 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1239 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1240 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1242 # 16-color linux console entry; this works with a 256-character
1243 # console font but bright background colors turn into dim ones when
1244 # you use a 512-character console font. This uses bold for bright
1245 # foreground colors and blink for bright background colors.
1247 # Interestingly, the original version of this entry in 2009 used a documented
1248 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1249 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1250 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1251 # suggested a different use for that particular code:
1253 # https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
1255 # Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
1257 # https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
1259 # For background, refer to the report on bug-ncurses:
1261 # https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
1262 linux-16color|Linux console with 16 colors,
1263 colors#16, ncv#42, pairs#0x100,
1264 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1265 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1268 # bterm (bogl 0.1.18)
1269 # Implementation is in bogl-term.c
1270 # Key capabilities from linux terminfo entry
1273 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1274 # bterm does not support sgr, since it only processes one parameter -TD
1275 bterm|bogl virtual terminal,
1277 colors#8, cols#80, lines#24, pairs#64,
1278 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J,
1279 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
1280 el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1281 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
1282 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1283 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1284 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1285 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1286 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n,
1287 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1288 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1289 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1290 use=vt220+pcedit, use=vt220+cvis,
1295 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1298 cols#80, it#8, lines#25,
1299 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1300 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1301 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1302 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1303 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1304 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1305 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1306 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1307 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1308 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1309 smso=\E[7m, smul=\E[4m,
1310 mach-bold|Mach console with bold instead of underline,
1311 rmul=\E[0m, smul=\E[1m, use=mach,
1312 mach-color|Mach console with ANSI color,
1314 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1315 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1317 # From: Samuel Thibault
1318 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1319 # Files: i386/i386at/kd.c
1321 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1323 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1324 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1325 \263y\363z\362{\343|\330}\234~\376,
1326 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1327 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1328 invis=\E[8m, nel=\EE,
1329 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1330 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1331 use=ecma+index, use=mach,
1333 mach-gnu-color|GNU Mach console with ANSI color,
1335 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1336 setaf=\E[3%p1%dm, use=mach-gnu,
1338 # From: Marcus Brinkmann
1339 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
1341 # Comments in the original are summarized here:
1343 # hurd uses 8-bit characters (km).
1345 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1347 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1348 # have the eat_newline_glitch. It doesn't support setting or removing tab
1351 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1352 # one byte instead three.
1354 # <ich1> is not included because hurd has insert mode.
1356 # hurd doesn't use ^J for scrolling, because this could put things into the
1357 # scrollback buffer.
1359 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1360 # This is a GNU extension.
1362 # The original has commented-out ncv, but is restored here.
1364 # Reading the source, RIS resets cnorm, but not xmous.
1365 hurd|The GNU Hurd console server,
1366 am, bce, bw, eo, km, mir, msgr, xenl, xon, NQ,
1367 colors#8, it#8, ncv#18, pairs#64,
1368 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1370 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\Ec, cr=\r,
1371 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1372 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1373 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1374 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1375 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1376 el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I,
1377 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1378 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1379 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
1380 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1381 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1382 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1383 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1384 kich1=\E[2~, kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[39;49m,
1385 rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m, rmir=\E[4l,
1386 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1387 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1388 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1389 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1390 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1391 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1392 use=vt220+pcedit, use=ecma+index, use=ecma+italics,
1399 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1400 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1401 # right corner without triggering a scroll. The ncurses terminfo library can
1402 # handle this case with the <ich1> capability, and prefers <am> for better
1403 # optimization. Bug: The <op> capability resets attributes.
1404 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1405 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1406 qnx|qnx4|QNX console,
1407 daisy, km, mir, msgr, xhpa, xt,
1408 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1409 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1410 \303u\264v\301w\302x\263,
1411 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1412 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1413 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1414 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1415 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1416 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1417 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1418 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1419 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1420 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1421 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1422 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1423 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1424 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1425 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1426 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1427 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1428 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1429 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1430 kext=\377\270, kf1=\377\201, kf10=\377\212,
1431 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1432 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1433 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1434 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1435 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1436 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1437 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1438 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1439 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1440 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1441 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1442 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1443 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1444 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1445 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1446 khlp=\377\350, khome=\377\240, khts=\377\342,
1447 kich1=\377\253, kil1=\377\273, kind=\377\261,
1448 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1449 knp=\377\252, knxt=\377\312, kopn=\377\357,
1450 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1451 kprv=\377\302, krdo=\377\336, kref=\377\354,
1452 kres=\377\360, krfr=\377\347, kri=\377\271,
1453 krmir=\377\313, krpl=\377\362, krst=\377\352,
1454 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1455 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1456 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1457 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1458 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1462 qnxt|qnxt4|QNX4 terminal,
1465 qnxm|QNX4 with mouse events,
1467 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1468 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1469 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1470 smicm=\E/>2h, use=qnx4,
1475 # Monochrome QNX4 terminal or console. Setting this terminal type will
1476 # allow an application running on a color console to behave as if it
1477 # were a monochrome terminal. Output will be through stdout instead of
1478 # console writes because the term routines will recognize that the
1479 # terminal name starts with 'qnxt'.
1481 qnxtmono|Monochrome QNX4 terminal or console,
1485 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1486 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1487 # (TD: derive from original qnx4 entry)
1488 qnxt2|QNX 2.15 serial terminal,
1490 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1491 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1493 # QNX ANSI terminal definition
1496 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1497 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1498 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
1499 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1500 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1501 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1502 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1503 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1504 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1505 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1506 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1507 ind=\E[S, invis=\E[9m,
1508 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1509 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1510 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1511 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1512 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1513 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1514 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1515 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1516 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1517 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1518 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1519 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1520 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1521 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1522 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1523 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1524 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1525 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1526 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1527 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1528 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1529 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1530 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1531 rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1532 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1533 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1534 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1536 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1538 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1539 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1540 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1541 smul=\E[4m, tbc=\E[3g,
1542 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=decid+cpr,
1543 use=ansi+rep, use=att610+cvis0, use=ecma+index,
1545 qansi|QNX ANSI with console writes,
1546 daisy, xhpa, use=qansi-g,
1548 qansi-t|QNX ANSI without console writes,
1551 qansi-m|QNX ANSI with mouse,
1553 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1554 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1555 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1556 smicm=\E[>2h, use=qansi,
1558 qansi-w|QNX ANSI for windows,
1563 # SCO console and SOS-Syscons console for 386bsd
1564 # (scoansi: had unknown capabilities
1565 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1566 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1567 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1568 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1569 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1570 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1571 # on the <smacs>=\E[12m -- esr)
1573 # klone+sgr-dumb is an error since the acsc does not match -TD
1575 # In this description based on SCO's keyboard(HW) manpage list of default
1576 # function key values:
1577 # F13-F24 are shifted F1-F12
1578 # F25-F36 are control F1-F12
1579 # F37-F48 are shift+control F1-F12
1581 # hpa/vpa work in the console, but not in scoterm:
1585 # SCO's terminfo uses
1588 # which do not work (console or scoterm).
1590 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1591 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1592 OTbs, am, bce, eo, xon, NQ,
1593 colors#8, cols#80, it#8, lines#25, pairs#64,
1594 acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN
1595 OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3
1597 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1598 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1599 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1600 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1601 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1602 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1603 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1604 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1605 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
1606 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
1607 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
1608 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1609 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1610 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1611 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1612 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1613 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1614 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1615 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1616 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1617 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1618 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1619 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1620 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1621 smul=\E[4m, use=ecma+index,
1622 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1624 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1625 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1626 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1627 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1628 %p7%t;8%;%?%p9%t;12%e;10%;m,
1629 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1630 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1631 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1632 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1633 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1635 # make this easy to change...
1636 scoansi|SCO Extended ANSI standard crt,
1641 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1642 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1643 # for the application keypad mode. We have added iris-ansi-ap rather than
1644 # change the original to keypad mode.
1646 # (iris-ansi: added rmam/smam based on init string -- esr)
1648 # This entry, and those derived from it, is used in xwsh (also known as
1649 # winterm). Some capabilities that do not fit into the terminfo model
1650 # include the shift- and control-functionkeys:
1652 # F1-F12 generate different codes when shift or control modifiers are used.
1656 # control-F1 \E[025q
1658 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1659 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1661 # The cursor keys also have different codes:
1662 # control-up \E[162q
1663 # control-down \E[165q
1664 # control-left \E[159q
1665 # control-right \E[168q
1668 # shift-down \E[164q
1669 # shift-left \E[158q
1670 # shift-right \E[167q
1672 # control-tab \[072q
1674 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1676 cols#80, it#8, lines#40,
1677 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1678 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1679 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1680 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1681 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1682 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1683 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1684 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1685 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1686 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1687 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1688 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1689 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1690 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1691 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1692 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1693 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1694 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1695 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1697 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1698 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1699 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1701 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1702 # (T.Dickey 98/1/24)
1703 iris-color|xwsh|IRIX ANSI with color,
1705 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1706 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1707 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1708 use=ecma+italics, use=vt100+enq, use=klone+color,
1711 #### OpenBSD consoles
1713 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1715 # The following terminal descriptions for the AMD/Intel PC console
1716 # were prepared based on information contained in the OpenBSD-4.9
1717 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1719 # Added bce based on testing with tack -TD
1720 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1721 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1723 # Notes from testing with vttest:
1724 # fails wrapping test
1726 # identifies as vt200 with selective erase, but does not implement DECSCA
1729 # ESC # 8 DEC Screen Alignment Test (DECALN).
1730 # CSI ? 5 h Reverse Video (DECSCNM).
1732 pccon+keys|OpenBSD PC keyboard keys,
1733 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1734 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1735 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1736 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1737 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1738 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1739 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1740 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1742 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1743 acsc=+>\,<-\^.v0#`+a:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#
1745 bold=\E[1m, rev=\E[7m, rmso=\E[27m,
1746 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1747 sgr0=\E[m, smso=\E[7m,
1748 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1749 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1750 bold=\E[1m, enacs=\E)0, rev=\E[7m, rmacs=\E(B, rmso=\E[27m,
1751 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1753 sgr0=\E[m\E(B, smacs=\E(0, smso=\E[7m,
1754 # underline renders as color
1755 pccon+colors|ANSI colors for OpenBSD PC console,
1757 colors#8, ncv#2, pairs#64,
1758 op=\E[49;39m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1759 # OpenBSD uses wscons,
1760 # + which does not implement DECSCNM or anything comparable, so it does not
1762 # + it renders underline using color.
1763 pccon+base|base capabilities for OpenBSD PC console,
1764 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1765 cols#80, it#8, lines#24,
1766 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1767 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1768 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1769 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1770 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1771 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1772 il=\E[%p1%dL, il1=\E[L, ind=\ED, nel=\EE, rc=\E8, ri=\EM,
1773 rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, sc=\E7, smam=\E[?7h,
1774 smul=\E[4m, tbc=\E[3g, use=ansi+cpr,
1775 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1776 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1777 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1778 use=pccon0-m, use=pccon+colors,
1779 pccon-m|OpenBSD PC console without colors,
1780 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1781 use=ansi+enq, use=vt220+cvis,
1782 pccon|OpenBSD PC console,
1783 use=pccon-m, use=pccon+colors,
1785 #### NetBSD consoles
1787 # pcvt termcap database entries (corresponding to release 3.31)
1788 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1790 # (For the terminfo master file, I translated these into terminfo syntax.
1791 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1792 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1793 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1795 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1796 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1797 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1798 pcvtXX|pcvt VT200 emulator (DEC VT220),
1799 am, km, mir, msgr, xenl,
1801 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1803 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1804 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1805 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1806 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1807 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1808 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1809 il=\E[%p1%dL, il1=\E[L, ind=\ED,
1810 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1811 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1812 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1813 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1814 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1815 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1816 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1817 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1818 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1819 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1820 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1821 use=decid+cpr, use=ecma+index, use=vt220+cvis,
1823 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1824 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1825 # 50 lines entries; 80 columns
1826 pcvt25|DEC VT220 emulation with 25 lines,
1828 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1829 pcvt28|DEC VT220 emulation with 28 lines,
1831 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1832 pcvt35|DEC VT220 emulation with 35 lines,
1834 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1835 pcvt40|DEC VT220 emulation with 40 lines,
1837 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1838 pcvt43|DEC VT220 emulation with 43 lines,
1840 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1841 pcvt50|DEC VT220 emulation with 50 lines,
1843 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1845 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor)
1846 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1847 # 50 lines entries; 132 columns
1848 pcvt25w|DEC VT220 emulation with 25 lines and 132 cols,
1850 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1851 pcvt28w|DEC VT220 emulation with 28 lines and 132 cols,
1853 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1854 pcvt35w|DEC VT220 emulation with 35 lines and 132 cols,
1856 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1857 pcvt40w|DEC VT220 emulation with 40 lines and 132 cols,
1859 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1860 pcvt43w|DEC VT220 emulation with 43 lines and 132 cols,
1862 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1863 pcvt50w|DEC VT220 emulation with 50 lines and 132 cols,
1865 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1867 # OpenBSD implements a color variation
1868 pcvt25-color|DEC VT220 emulation with 25 lines and color,
1870 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1871 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1872 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1873 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1874 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1877 # Terminfo entries to enable the use of the ncurses library in colour on a
1878 # NetBSD-arm32 console (only tested on a RiscPC).
1879 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1880 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1881 # typo in invis - TD
1882 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1883 am, bce, msgr, xenl, xon,
1884 cols#80, it#8, lines#30,
1885 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1886 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1887 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1888 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1889 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1890 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1891 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1892 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1893 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1894 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1895 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1896 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1897 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1898 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1899 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1901 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1902 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1903 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1904 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1907 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1908 cols#132, lines#50, use=arm100,
1910 # NetBSD/x68k console VT200 emulator. This port runs on a 68K machine
1911 # manufactured by Sharp for the Japanese market.
1912 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1913 x68k|x68k-ite|NetBSD/x68k ITE,
1915 kclr=\E[9~, khlp=\E[28~, use=vt220-base,
1918 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1920 # (still unfinished, but good enough so far.)
1921 ofcons|DNARD OpenFirmware console,
1924 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1925 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1926 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1927 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1928 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1929 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1930 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1931 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1932 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1933 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1934 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1935 rmso=\2330m, rmul=\2330m,
1936 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1937 %;%?%p1%p3%|%t;7%;m,
1938 sgr0=\2330m, smso=\2337m, smul=\2334m,
1940 # NetBSD "wscons" emulator in VT220 mode.
1941 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1942 # The emulator renders underlined text in red. Colors are otherwise usable.
1944 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1945 # that "vt220" is inaccurate. There are a few VT220-features, but most of the
1946 # VT220 screens in vttest do not work with this emulator. For instance, it
1947 # identifies itself (primary DA response) as a VT220 with selective erase. But
1948 # the selective erase feature does not work. The secondary response is copied
1949 # from Kermit's emulation of VT220, does not correspond to actual VT220. At
1950 # the level of detail in a termcap, it is a passable emulator, since ECH does
1951 # work. Don't use it on a VMS system -TD
1952 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1954 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1955 is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
1956 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
1957 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
1958 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1959 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1961 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1964 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1966 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1967 # Initial testing set TERM=xterm, based on comments by developers, found too
1968 # many differences to continue in that path. However, test-results may be
1969 # useful to people curious about compatibility with xterm.
1971 # Testing with tack:
1973 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1974 # There is color-bleeding in the color-pairs screen.
1975 # Attributes do not work with color
1977 # Failed: kf1-kf4, kf13-kf48, khome, kend
1978 # (effectively xterm-r6 for function-keys)
1979 # None of the function or cursor key-modifiers are encoded.
1980 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1982 # Testing with vttest:
1983 # -------------------
1984 # Identifies as VT220 with selective erase
1985 # (however, selective erase refers to DECSCA, SPA)
1986 # Does not implement VT52
1987 # Uses spaces to simulate double-size characters
1988 # Does not support 8-bit controls
1989 # Does not support VT220 reports
1990 # Does not support send/receive mode
1991 # Supports ECH (like rxvt)
1992 # Does not support DECSCA
1993 # Does not support any of the ISO-6429 cursor-movement
1994 # Does not support any of the ISO-6429 miscellaneous tests
1995 # (SL/SR also leave unexpected char on screen too)
1996 # Background does not change in menu 11.6.9 (SGR 22-27)
1997 # None of the xterm special features tests work
1998 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2001 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2003 rcons|BSD rasterconsole,
2005 # Color version of above. Color currently only provided by NetBSD.
2006 rcons-color|BSD rasterconsole with ANSI color,
2009 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2011 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2012 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2013 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2014 # -- compare with cons25w
2015 mgterm|MGL/MGL2 MobileGear Graphic Library,
2016 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2017 colors#8, cols#80, it#8, lines#18, pairs#64,
2018 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2019 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2020 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2021 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2022 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2023 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2024 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2025 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
2026 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2027 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
2028 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
2029 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2030 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
2031 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2032 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
2033 vpa=\E[%i%p1%dd, use=ecma+index,
2035 #### FreeBSD console entries
2037 # Originally from termcap:
2039 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2040 # Andrey Chernov maintains the FreeBSD termcap distributions.
2042 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2043 # or comment out the :cb: capability in the console entry.
2045 # Alexander Lukyanov reports:
2046 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2047 # Now el1 clears not only to the line beginning, but also a large chunk
2048 # of previous line. But there is another bug - ech does not work at all.
2050 # syscons, sc - the console driver
2053 # common entry without semigraphics
2054 # Bug: The <op> capability resets attributes.
2055 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2056 # instance el1 does if the cursor is moved to the right margin first. Removed
2057 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2059 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2060 # Note that this disables standout with color.
2062 # The emulator sends different strings based on shift- and control-keys,
2064 # F13-F24 are shifted F1-F12
2065 # F25-F36 are control F1-F12
2066 # F37-F48 are shift+control F1-F12
2067 cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode),
2068 am, bce, bw, eo, msgr, npc,
2069 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2070 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2071 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2072 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2073 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2074 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2075 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2076 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2077 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
2078 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2079 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
2080 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
2081 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
2082 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
2083 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
2084 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
2085 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
2086 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
2087 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
2088 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
2089 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
2090 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
2091 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
2093 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2095 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
2096 cons25|ansis|ansi80x25|FreeBSD console (25-line ANSI mode),
2097 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2098 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2101 cons25-debian|FreeBSD console with debian backspace (25-line ANSI mode),
2102 kbs=^?, kdch1=\E[3~, use=cons25,
2103 cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ANSI mode),
2105 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2106 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2107 smul=\E[4m, use=cons25,
2108 cons30|ansi80x30|FreeBSD console (30-line ANSI mode),
2109 lines#30, use=cons25,
2110 cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ANSI mode),
2111 lines#30, use=cons25-m,
2112 cons43|ansi80x43|FreeBSD console (43-line ANSI mode),
2113 lines#43, use=cons25,
2114 cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ANSI mode),
2115 lines#43, use=cons25-m,
2116 cons50|ansil|ansi80x50|FreeBSD console (50-line ANSI mode),
2117 lines#50, use=cons25,
2118 cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ANSI mode),
2119 lines#50, use=cons25-m,
2120 cons60|ansi80x60|FreeBSD console (60-line ANSI mode),
2121 lines#60, use=cons25,
2122 cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ANSI mode),
2123 lines#60, use=cons25-m,
2124 cons25r|pc3r|ibmpc3r|cons25-koi8-r|FreeBSD console w/koi8-r cyrillic,
2125 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2126 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2129 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|FreeBSD console w/koi8-r cyrillic (mono),
2131 op@, rmul=\E[m, setab@, setaf@,
2132 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2133 %t;30;1%;%?%p6%t;1%;m,
2134 smul=\E[4m, use=cons25r,
2135 cons50r|cons50-koi8r|FreeBSD console w/koi8-r cyrillic (50 lines),
2136 lines#50, use=cons25r,
2137 cons50r-m|cons50-koi8r-m|FreeBSD console w/koi8-r cyrillic (50-line mono),
2138 lines#50, use=cons25r-m,
2139 cons60r|cons60-koi8r|FreeBSD console w/koi8-r cyrillic (60 lines),
2140 lines#60, use=cons25r,
2141 cons60r-m|cons60-koi8r-m|FreeBSD console w/koi8-r cyrillic (60-line mono),
2142 lines#60, use=cons25r-m,
2143 # ISO 8859-1 FreeBSD console
2144 cons25l1|cons25-iso8859|FreeBSD console w/iso 8859-1 chars,
2145 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2146 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2147 \226v\227w\230x\231y\232z\233~\237,
2149 cons25l1-m|cons25-iso-m|FreeBSD console w/iso 8859-1 chars (mono),
2151 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2152 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2153 smul=\E[4m, use=cons25l1,
2154 cons50l1|cons50-iso8859|FreeBSD console w/iso 8859-1 chars (50 lines),
2155 lines#50, use=cons25l1,
2156 cons50l1-m|cons50-iso-m|FreeBSD console w/iso 8859-1 chars (50-line mono),
2157 lines#50, use=cons25l1-m,
2158 cons60l1|cons60-iso|FreeBSD console w/iso 8859-1 chars (60 lines),
2159 lines#60, use=cons25l1,
2160 cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono),
2161 lines#60, use=cons25l1-m,
2163 # vt - virtual terminal console driver
2165 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2166 # which is intended to be xterm-compatible. See for example
2167 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2168 # in particular scterm-teken.c
2170 # Some of the documentation refers to this as "vt"; its proper name is "teken".
2172 # The sc(4) manual page states that it is possible to switch between the two
2173 # by editing /boot/loader.conf, adding
2175 # Doing that does not change the default TERM variable. That is hard-coded in
2176 # /etc/ttys, rather than deriving it from the kernel state.
2178 # For FreeBSD 12 and 13:
2179 # ---------------------
2180 # In newer releases, it is no longer possible to boot into a configuration that
2181 # works with syscons. According to efi(4),
2182 # "The vt(4) system console is automatically selected when booting via UEFI."
2183 # See FreeBSD #264226.
2185 # FreeBSD 13 supports 64-bit machines which boot with UEFI:
2186 # https://www.freebsd.org/platforms/
2187 # The i386 platform does not use UEFI (and modifying the loader configuration
2188 # does load sysconf); however because no updates (fixes) are available, most
2189 # developers will regard that as unsupported.
2191 # With FreeBSD 13, even when syscons is loaded (e.g., with the i386 platform),
2192 # its function-keys are not configured. Using
2193 # vidcontrol -T cons25
2196 # When teken is loaded, vidcontrol can switch at runtime between the
2197 # teken/cons25 function keys:
2198 # vidcontrol -T cons25
2199 # vidcontrol -T xterm
2200 # However due to a limitation in the implementation, only the first 12 function
2201 # keys are available. The real syscons supports 48 function keys (using the
2202 # shift and control modifiers), while xterm supports more than twice as many.
2204 # vidcontrol does not change the emulation. As a result, the quarter (17/73) of
2205 # non-function key capabilities which differ between syscons and teken are
2206 # unsupported in the UEFI-based configurations.
2209 # VT100 line-drawing does not work (UTF-8 equivalents do).
2210 # Shift/control modifiers have no effect on special keys.
2211 # Meta does not work.
2213 # supports REP (repeat).
2214 # still does not support left/right margins
2215 # SU/SD work, but not SL/SR
2216 # alternate screen does not work
2217 # ENQ/DA1 is unimplemented (the terminal does not identify itself)
2218 # CPR, XCPR are unimplemented (i.e., vttest and resize are broken)
2219 # implements X11 (original) xterm-mouse.
2221 # UTF-8 line-drawing works, including some double/thick lines
2223 # For FreeBSD 9 and 10:
2224 # --------------------
2225 # The /etc/ttys entries for console and other ttys are all configured to set
2228 # Testing with tack:
2229 # There is no VT100 line-drawing (uses +'s and -'s)
2230 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2232 # Testing with vttest:
2233 # Menu 2 diamonds don't work, blink ditto, light background ditto
2234 # The terminal identifies itself as VT100 with AVO
2235 # There is no VT52 support
2236 # There is no doublesize character support
2237 # The terminal supports ECH (like rxvt)
2238 # The terminal does not support send/receive mode
2239 # The terminal supports all of the ISO-6429 cursor-movement
2240 # The terminal supports some of the ISO-6429 miscellaneous tests
2241 # (SL/SR also leave unexpected char on screen too)
2243 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2244 # the cells which happen to have ASCII control-character values:
2245 # - ^X arrow pointing up
2246 # . ^Y arrow pointing down
2250 # Those are removed from this entry's acsc string to avoid confusion.
2251 # The resulting description provides correct line-drawing and function-keys -TD
2252 teken-2018|teken as of 2018,
2254 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2255 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2256 cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
2257 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[F, kent=\r,
2258 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
2259 kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2260 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
2261 kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
2262 vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
2264 teken-2022|teken as of 2022,
2265 am, bce, eo, mir, msgr, npc, NQ,
2266 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, U8#1,
2267 bold=\E[1m, cr=\r, cub1=^H, dim=\E[30;1m, ech=\E[%p1%dX,
2268 ind=\E[S, kbs=^H, kent=\r, nel=\E[E, op=\E[x, rev=\E[7m,
2269 ri=\E[T, rmso=\E[27m, rs2=\E[x\E[m\Ec, setab=\E[4%p1%dm,
2271 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2272 sgr0=\E[m, use=vt220+cvis, use=ecma+index,
2273 use=ansi+arrows, use=ansi+csr, use=ansi+cup,
2274 use=ansi+erase, use=ansi+idc, use=ansi+idl,
2275 use=ansi+local, use=ansi+rca2, use=ansi+sgrso,
2278 teken-vt+fkeys|teken's xterm special keys,
2279 kdch1=\E[3~, kend=\E[F, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
2280 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
2281 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2282 kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2284 teken-sc+fkeys|teken's syscons special keys,
2285 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2286 kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R,
2287 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2290 teken-sc|teken imitating syscons,
2291 use=teken-sc+fkeys, use=teken-2022,
2293 teken|teken-vt|teken imitating xterm,
2294 xenl, use=teken-vt+fkeys, use=xterm+x11mouse,
2297 teken-16color|teken using 16 colors,
2298 use=ibm+16color, use=teken,
2300 #### 386BSD and BSD/OS Consoles
2303 # This was the original 386BSD console entry (I think).
2304 # Some places it's named oldpc3|oldibmpc3.
2305 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2306 origpc3|origibmpc3|IBM PC 386BSD console,
2307 OTbs, am, bw, eo, xon,
2309 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2311 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2312 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2313 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2314 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2315 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2316 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2318 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2319 oldpc3|oldibmpc3|old IBM PC BSD/386 console,
2322 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2323 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2324 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2325 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2327 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2328 # Note, the emulator supports many of the additional console features
2329 # listed in the iBCS2 (e.g. character-set selection) though not all
2330 # are described here. This entry really ought to be upgraded.
2331 # Also note, the console will also work with fewer lines after doing
2332 # "stty rows NN", e.g. to use 24 lines.
2333 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2334 # Bug: The <op> capability resets attributes.
2335 bsdos-pc|IBM PC BSD/OS console,
2336 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2337 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2338 use=bsdos-pc-nobold,
2340 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2341 use=klone+color, use=bsdos-pc-m,
2343 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2344 OTbs, am, eo, km, xon,
2345 cols#80, it#8, lines#25,
2346 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2347 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2348 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2349 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2350 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2351 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2352 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2353 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2354 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2357 # Old names for BSD/OS PC console used in releases before 4.1.
2358 pc3|BSD/OS on the PC console,
2359 use=bsdos-pc-nobold,
2360 ibmpc3|pc3-bold|BSD/OS on the PC console with bold instead of underline,
2363 # BSD/OS on the SPARC
2364 bsdos-sparc|Sun SPARC BSD/OS console,
2367 # BSD/OS on the PowerPC
2368 bsdos-ppc|PowerPC BSD/OS console,
2373 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2375 # Actually (TD pointed this out at the time the acsc string was added):
2376 # VT52 shouldn't define full acsc since most of the cells don't match.
2377 # see VT100 manual page A-31. This is the list that does match:
2386 # The line-drawing happens to work in several terminal emulators, but should
2387 # not be used as a guide to the capabilities of the VT52. Note in particular
2388 # that VT52 does not support line-drawing characters (the scan-X values refer
2389 # to a crude plotting feature) -TD
2393 acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
2394 ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL],
2397 # This is more likely the "vt52" that you would see in emulation, i.e., no
2398 # keypad, no graphics.
2399 vt52-basic|VT52 for emulators,
2400 cols#80, it#8, lines#24,
2401 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
2402 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2403 home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2404 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI,
2406 #### DEC VT100 and compatibles
2408 # DEC terminals from the VT100 forward are collected here. Older DEC terminals
2409 # and micro consoles can be found in the `obsolete' section. More details on
2410 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2411 # found near the end of this file.
2413 # Except where noted, these entries are DEC's official terminfos.
2414 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2415 # Engineering for more information. Updated terminfos and termcaps
2416 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2418 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2419 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2420 # its name to Boundless Technologies; see http://www.boundless.com.
2423 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2424 # certainly includes what DEC called the `Level 1 editing extension' codes;
2425 # only the very oldest VT100s lacked these and there probably aren't any of
2426 # those left alive. To capture these, use one of the VT102 entries.
2428 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2429 # since the cursor is left in a different position while in the
2430 # weird state (concept at beginning of next line, vt100 at end
2431 # of this line) so all versions of vi before 3.7 don't handle
2432 # <xenl> right on vt100. The correct way to handle <xenl> is when
2433 # you output the char in column 80, immediately output CR LF
2434 # and then assume you are in column 1 of the next line. If <xenl>
2435 # is on, am should be on too.
2437 # I assume you have smooth scroll off or are at a slow enough baud
2438 # rate that it doesn't matter (1200? or less). Also this assumes
2439 # that you set auto-nl to "on", if you set it off use vt100-nam
2442 # The padding requirements listed here are guesses. It is strongly
2443 # recommended that xon/xoff be enabled, as this is assumed here.
2445 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2446 # tab settings are in non-volatile memory and don't need to be
2447 # reset upon login. Also setting the number of columns glitches
2448 # the screen annoyingly. You can type "reset" to get them set.
2450 # The VT100 series terminals have cursor ("arrows") keys which can operate
2451 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2452 # is the reset state, and is assumed to be the normal state. Application
2453 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2454 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2455 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2456 # was provided primarily as an aid to the porting of VT52 applications. It is
2457 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2458 # applications such as vi will always transmit the <smkx> string. Therefore,
2459 # the definitions for the cursor keys are made to match what the terminal
2460 # transmits after the <smkx> string is transmitted. If the <smkx> string
2461 # is a null string or is not defined, then cursor keys are assumed to be in
2462 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2463 # else the application may fail. It is also expected that applications will
2464 # always transmit the <rmkx> string to the terminal before they exit.
2466 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2467 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2468 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2469 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2470 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2471 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2472 # Enter key transmits the same as the Return key (Note: the Return key
2473 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2474 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2475 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2476 # is normally in Numeric Mode. If an application requires that the keypad be
2477 # in Application Mode then it is expected that the user, or the application,
2478 # will set the TERM environment variable to point to a terminfo entry which has
2479 # defined the <smkx> string to include the codes that switch the keypad into
2480 # Application Mode, and the terminfo entry will also define function key
2481 # fields to match the Application Mode control codes. If the <smkx> string
2482 # is a null string or is not defined, then the keypad is assumed to be in
2483 # Numeric Mode. If the <smkx> string switches the keypad into Application
2484 # Mode, it is expected that the <rmkx> string will contain the control codes
2485 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2486 # applications which transmit the <smkx> string will also always transmit the
2487 # <rmkx> string to the terminal before they exit.
2489 # Here's a diagram of the VT100 keypad keys with their bindings.
2490 # The top line is the name of the key (some DEC keyboards have the keys
2491 # labelled somewhat differently, like GOLD instead of PF1, but this is
2492 # the most "official" name). The second line is the escape sequence it
2493 # generates in Application Keypad mode (where "$" means the ESC
2494 # character). The third line contains two items, first the mapping of
2495 # the key in terminfo, and then in termcap.
2496 # _______________________________________
2497 # | PF1 | PF2 | PF3 | PF4 |
2498 # | $OP | $OQ | $OR | $OS |
2499 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2501 # | $Ow | $Ox | $Oy | $Om |
2502 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2504 # | $Ot | $Ou | $Ov | $Ol |
2505 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2507 # | $Oq | $Or | $Os | enter |
2508 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2511 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2513 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2514 # terminfo guidelines. That is a compromise used to assign the remaining
2515 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2517 vt100+keypad|DEC VT100 numeric keypad no fkeys,
2518 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2519 vt100+pfkeys|DEC VT100 numeric keypad (kf1-kf4),
2520 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2522 vt100+fnkeys|DEC VT100 numeric keypad (kf0-kf10),
2523 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2524 kf9=\EOw, use=vt100+pfkeys,
2526 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2527 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2528 # use the 5-key arrangement to model the arrow keys as suggested in the
2529 # terminfo guidelines:
2530 # _______________________________________
2531 # | PF1 | PF2 | PF3 | PF4 |
2532 # | $OP | $OQ | $OR | $OS |
2533 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2535 # | $Ow | $Ox | $Oy | $Om |
2536 # |_ka1__K1_|_________|_ka3__K3_|_________|
2538 # | $Ot | $Ou | $Ov | $Ol |
2539 # |_________|_kb2__K2_|_________|_________|
2541 # | $Oq | $Or | $Os | enter |
2542 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2545 # |___________________|_________|_kent_@8_|
2547 vt220+keypad|DEC VT220 numeric keypad,
2548 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2549 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2552 vt100+enq|ncurses extension for VT100-style ENQ,
2553 u8=\E[?1;2c, use=ansi+enq,
2554 vt102+enq|ncurses extension for VT102-style ENQ,
2555 u8=\E[?6c, use=ansi+enq,
2557 # And here, for those of you with orphaned VT100s lacking documentation, is
2558 # a description of the soft switches invoked when you do `Set Up'.
2560 # Scroll 0-Jump Shifted 3 0-#
2561 # | 1-Smooth | 1-British pound sign
2562 # | Autorepeat 0-Off | Wrap Around 0-Off
2564 # | | Screen 0-Dark Bkg | | New Line 0-Off
2565 # | | | 1-Light Bkg | | | 1-On
2566 # | | | Cursor 0-Underline | | | Interlace 0-Off
2567 # | | | | 1-Block | | | | 1-On
2569 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2571 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2572 # | | | 1-On | | | 1-50 Hz
2573 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2574 # | | 1-ANSI | | 1-8 Bits
2575 # | Keyclick 0-Off | Parity 0-Off
2577 # Margin Bell 0-Off Parity Sense 0-Odd
2580 # The following SET-UP modes are assumed for normal operation:
2581 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2582 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2583 # Other SET-UP modes may be set for operator convenience or communication
2584 # requirements; I recommend
2585 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2586 # Unless you have a graphics add-on such as Digital Engineering's VT640
2587 # (and even then, whenever it can be arranged!) you should set
2590 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2591 vt100|vt100-am|DEC VT100 (w/advanced video),
2592 OTbs, mc5i, xenl, xon,
2594 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2595 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2596 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2597 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2599 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2600 %;m%?%p9%t\016%e\017%;$<2>,
2601 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2602 use=decid+cpr, use=vt100+4bsd, use=vt100+fnkeys,
2603 vt100+4bsd|DEC VT100 from 4.0BSD,
2605 cols#80, it#8, lines#24,
2606 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2607 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2608 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2609 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2610 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2611 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2612 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2613 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2614 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2615 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2616 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2617 %;m%?%p9%t\016%e\017%;$<2>,
2618 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2619 smul=\E[4m$<2>, tbc=\E[3g,
2620 vt100nam|vt100-nam|VT100 no automargins,
2622 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2623 vt100-vb|DEC VT100 (w/advanced video) & no beep,
2624 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2626 # Ordinary VT100 in 132 column ("wide") mode.
2627 vt100-w|vt100-w-am|DEC VT100 132 cols (w/advanced video),
2629 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2630 vt100-w-nam|vt100-nam-w|DEC VT100 132 cols (w/advanced video no automargin),
2631 cols#132, lines#14, vt@,
2632 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2634 # VT100 with no advanced video.
2635 vt100-nav|VT100 without advanced video option,
2637 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2639 vt100-nav-w|vt100-w-nav|DEC VT100 132 cols 14 lines (no advanced video option),
2640 cols#132, lines#14, use=vt100-nav,
2642 # VT100 with one of the 24 lines used as a status line.
2643 # We put the status line on the top.
2644 vt100-s|vt100-s-top|vt100-top-s|VT100 for use with top sysline,
2647 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2648 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2649 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2650 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2652 # Status line at bottom.
2653 # Clearing the screen will clobber status line.
2654 vt100-s-bot|vt100-bot-s|VT100 for use with bottom sysline,
2657 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2658 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2660 # Most of the `vt100' emulators out there actually emulate a VT102
2661 # This entry (or vt102-nsgr) is probably the right thing to use for
2664 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2666 vt102-w|DEC VT102 in wide mode,
2668 rs3=\E[?3h, use=vt102,
2670 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2671 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2672 # string in the canonical vt100 entry above leaves the screen littered
2673 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2674 # after highlight turnoffs. This entry should fix that, and even leave
2675 # ACS support working, at the cost of making multiple-highlight changes
2676 # slightly more expensive.
2677 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2678 vt102-nsgr|VT102 no sgr (use if you see snowflakes after highlight changes),
2679 sgr@, sgr0=\E[m, use=vt102,
2681 # VT125 Graphics CRT. Clear screen also erases graphics
2682 # Some VT125's came configured with VT102 support.
2683 vt125|VT125 graphics terminal,
2685 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2687 # This isn't a DEC entry, it came from University of Wisconsin.
2688 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2691 cols#80, it#8, lines#24, vt#3,
2692 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2693 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2694 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2695 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2696 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2697 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2698 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2699 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2700 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2702 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2703 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2704 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2706 # vt132 - like vt100 but slower and has ins/del line and such.
2707 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2708 # manual and from the ANSI standard, this describes the actual
2709 # terminal. I've never actually used a vt132 myself, so this
2714 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2715 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2717 # This vt220 description maps F5--F9 to the second block of function keys
2718 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2719 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2720 # PF1--PF4 are used as F1--F4.
2723 vt220-old|vt200-old|DEC VT220 in VT100 emulation mode,
2724 OTbs, OTpt, am, mir, msgr, xenl, xon,
2725 cols#80, lines#24, vt#3,
2727 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2728 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2729 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2730 cub1=^H, cud1=\E[B, cuf1=\E[C,
2731 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2732 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2733 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2734 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2735 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
2736 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
2737 kf8=\E[20~, kf9=\E[21~, kich1=\E[2~, rc=\E8, rev=\E[7m$<2>,
2738 rf=/usr/share/tabset/vt100, ri=\EM$<14/>,
2739 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2740 rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2742 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2743 %p9%t\E(0%e\E(B%;$<2>,
2744 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2745 smso=\E[7m, smul=\E[4m, use=vt220+pcedit, use=vt220+cvis,
2747 # Here's a picture of the Sun/PC editing keypad:
2748 # +--------+--------+--------+
2749 # | Insert | Home | PageUp |
2750 # +--------+--------+--------+
2751 # | Delete | End | PageDn |
2752 # +--------+--------+--------+
2754 # VT220 emulators such as xterm, using PC-keyboards use a different layout than
2755 # the VT220 keyboard:
2764 vt220+pcedit|editing-keypad for VT220 using PC keyboard,
2765 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
2766 knp=\E[6~, kpp=\E[5~,
2767 vt220+vtedit|editing-keypad for VT220 using DEC keyboard,
2768 kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2771 # A much better description of the VT200/220; used to be vt220-8
2772 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2773 # designation to accommodate bug in pcvt -TD
2775 # Here's a picture of the VT220 editing keypad:
2776 # +--------+--------+--------+
2777 # | Find | Insert | Remove |
2778 # +--------+--------+--------+
2779 # | Select | Prev | Next |
2780 # +--------+--------+--------+
2782 # Still, this is a "base" entry. Software emulators commonly leave out the
2783 # DECTCEM feature -TD
2784 vt220-base|DEC VT220 as emulated,
2785 OTbs, am, mir, msgr, xenl, xon,
2786 cols#80, it#8, lines#24, vt#3,
2787 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2788 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2789 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2790 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2791 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2792 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2793 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2794 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2795 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2796 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2797 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2798 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2799 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2800 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2801 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2802 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
2803 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
2804 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l,
2805 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2806 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2807 %p9%t\E(0%e\E(B%;$<2>,
2808 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2809 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit,
2810 use=ansi+pp, use=ansi+enq,
2811 vt220|vt200|DEC VT220,
2812 use=vt220+cvis, use=vt220-base,
2813 vt220-w|vt200-w|DEC VT220 in wide mode,
2815 rs3=\E[?3h, use=vt220,
2816 vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode,
2817 OTbs, am, mc5i, mir, msgr, xenl, xon,
2818 cols#80, it#8, lines#24, vt#3,
2819 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2820 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2821 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2822 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2823 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2824 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2825 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2826 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2827 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2828 il=\233%p1%dL, il1=\233L, ind=\ED,
2829 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2830 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2831 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2832 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2833 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2834 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2835 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2836 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2837 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2838 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2839 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2840 rmul=\23324m, rs1=\233?3l, sc=\E7,
2841 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2842 %?%p9%t\E(0%e\E(B%;$<2>,
2843 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2844 smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
2847 # This VT220 description regards F6--F10 as the second block of function keys
2848 # at the top of the keyboard. This mapping follows the description given
2849 # in the VT220 Programmer Reference Manual and agrees with the labeling
2850 # on some terminals that emulate the VT220. There is no support for an F5.
2851 # See vt220 for an alternate mapping.
2853 vt220d|DEC VT220 in VT100 mode with DEC function key labeling,
2854 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2855 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2856 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2857 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2859 vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins,
2861 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2863 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2864 # (not an official DEC entry!)
2865 # The problem with real VT220 terminals is they don't send escapes when in
2866 # in VT220 mode. This can be gotten around two ways. 1> don't send
2867 # escapes or 2> put the VT220 into VT100 mode and use all the nifty
2868 # features of VT100 advanced video which it then has.
2870 # This entry takes the view of putting a VT220 into VT100 mode so
2871 # you can use the escape key in emacs and everything else which needs it.
2873 # You probably don't want to use this on a VMS machine since VMS will think
2874 # it has a VT220 and will get fouled up coming out of emacs
2876 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2877 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2879 vt200-js|vt220-js|DEC VT200 series with jump scroll,
2882 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2883 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2884 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2885 ht=^I, il1=\E[L, ind=\ED,
2886 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2888 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2889 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2890 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2891 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2892 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2893 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2896 # This was DEC's VT320. Use the purpose-built one below instead
2897 #vt320|DEC VT320 in VT100 emulation mode,
2900 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2902 vt320nam|v320n|DEC VT320 in VT100 emul. mode with NO AUTO WRAP mode,
2904 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
2907 # These entries are not DEC's official ones, they were purpose-built for the
2908 # VT320. Here are the designer's notes:
2909 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2910 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2911 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2912 # Things that use <knxt> usually use tab anyways... and things that don't use
2913 # tab usually use <knxt> instead...
2914 # kprv is same as tab - Backtab is useless...
2915 # I left out <sgr> because of its RIDICULOUS complexity,
2916 # and the resulting fact that it causes the termcap translation of the entry
2917 # to SMASH the 1k-barrier...
2918 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2919 # (vt320: uncommented <fsl> --esr)
2920 vt320|vt300|DEC VT320 7 bit terminal,
2921 am, mir, msgr, xenl,
2922 cols#80, lines#24, wsl#80,
2923 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2924 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
2925 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2926 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2927 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2928 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2929 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2930 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2931 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2932 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2933 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2934 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2935 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2936 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2937 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2938 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2939 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2940 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2942 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2944 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2945 %p9%t\E(0%e\E(B%;$<2>,
2946 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2947 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2948 use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl,
2950 vt320-nam|vt300-nam|DEC VT320 7 bit terminal with no am to make SAS happy,
2952 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2953 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2954 # We have to init 132-col mode, not 80-col mode.
2955 vt320-w|vt300-w|DEC VT320 wide 7 bit terminal,
2957 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2958 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2959 vt320-w-nam|vt300-w-nam|DEC VT320 wide 7 bit terminal with no am,
2961 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2962 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2964 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2965 # which are pretty much a superset of the VT320. They have the
2966 # host writable status line, yet another different DRCS matrix size,
2967 # and such, but they add the DEC Technical character set, Multiple text
2968 # pages, selectable length pages, and the like. The difference between
2969 # the VT330 and VT340 is that the former has only 2 planes and a monochrome
2970 # monitor, the latter has 4 planes and a color monitor. These terminals
2971 # support VT131 and ANSI block mode, but as with much of these things,
2972 # termcap/terminfo doesn't deal with these features.
2974 # Note that this entry is are set up in what was the standard way for GNU
2975 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2976 # keys were switched into application mode at the same time the numeric pad
2977 # is switched into application mode. This changes the definitions of the
2978 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2979 # your termcap or terminfo entry,
2981 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2982 # (vt340: string capability "sb=\E[M" corrected to "sr";
2983 # also, added <rmam>/<smam> based on the init string -- esr)
2984 vt340|dec-vt340|vt330|dec-vt330|DEC VT340 graphics terminal with 24 line page,
2985 am, eslok, hs, mir, msgr, xenl, xon,
2986 cols#80, it#8, lines#24, vt#3,
2987 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2988 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2989 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2990 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2991 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2992 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2993 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
2994 flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
2995 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2996 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2998 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2999 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3000 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3001 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3002 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3003 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3004 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3005 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3006 %p9%t\E(0%e\E(B%;$<2>,
3007 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3008 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3009 tsl=\E[2$~\E[1$}\E[1;%dH, use=vt220+cvis,
3011 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
3012 vt420+lrmm|VT420 left/right margins,
3013 mgc=\E[?69l, smglp=\E[?69h\E[%i%p1%ds,
3014 smglr=\E[?69h\E[%i%p1%d;%p2%ds,
3015 smgrp=\E[?69h\E[%i;%p1%ds,
3017 # DEC doesn't supply a VT400 description, so we add Daniel Glasser's
3018 # (originally written with VT420 as its primary name, and usable for it).
3020 # VT400/420 -- This terminal is a superset of the VT320. It adds the multiple
3021 # text pages and long text pages with selectable length of the VT340, along
3022 # with left and right margins, rectangular area text copy, fill, and erase
3023 # operations, selected region character attribute change operations,
3024 # page memory and rectangle checksums, insert/delete column, reception
3025 # macros, and other features too numerous to remember right now. TERMCAP
3026 # can only take advantage of a few of these added features.
3028 # Note that this entry is set up in what was the standard way for GNU
3029 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3030 # keys were switched into application mode at the same time the numeric pad
3031 # is switched into application mode. This changes the definitions of the
3032 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3033 # your termcap entry,
3035 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3036 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3037 # also, added <rmam>/<smam> based on the init string -- esr)
3038 vt400|vt400-24|dec-vt400|DEC VT400 24x80 column autowrap,
3039 am, eslok, mir, msgr, xenl, xon,
3040 cols#80, it#8, lines#24, vt#3,
3041 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3042 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r,
3043 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3044 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3045 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3046 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3047 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3048 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
3049 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3050 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3051 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3053 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3054 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3055 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3056 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3057 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3058 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3059 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3060 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3061 %p9%t\E(0%e\E(B%;$<2>,
3062 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3063 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3064 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, use=vt220+cvis,
3066 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3067 # a missing <sc> -- esr)
3068 # add msgr and other capabilities from vt220 -TD
3070 am, mir, msgr, xenl, xon,
3071 cols#80, it#8, lines#24, vt#3,
3072 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3073 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3074 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3075 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
3076 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>,
3077 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3078 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>,
3079 el=\E[K$<3>, el1=\E[1K, enacs=\E)0,
3080 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3081 ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3082 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3083 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3084 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
3085 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
3086 kf8=\E[20~, kf9=\E[21~, nel=\EE, rc=\E8, rev=\E[7m$<2>,
3087 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
3088 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3089 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3090 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3091 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3092 %p9%t\E(0%e\E(B%;$<2>,
3093 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3094 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3095 use=vt220+vtedit, use=ansi+pp, use=dec+sl, use=ansi+enq,
3096 use=vt220+cvis, use=vt420+lrmm,
3098 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3099 # takes two parameters, the key and the string. Translating the key is
3100 # straightforward (keys 1-5 are not defined on real terminals, though some
3101 # emulators define these):
3103 # if (key < 16) then value = key;
3104 # else if (key < 21) then value = key + 1;
3105 # else if (key < 25) then value = key + 2;
3106 # else if (key < 27) then value = key + 3;
3107 # else if (key < 30) then value = key + 4;
3108 # else value = key + 5;
3110 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3111 # There's no provision in terminfo for emitting a string in this format, so the
3112 # application has to know it.
3114 vt420pc|DEC VT420 w/PC keyboard,
3115 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3116 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3117 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3118 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3119 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3120 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3121 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3122 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3123 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3124 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3125 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3126 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3127 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3128 pctrm=USR_TERM:vt420pcdos:,
3129 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3130 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3134 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3136 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3137 %{127}%=%t\E\177%e%p1%c%;,
3139 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3140 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3142 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3143 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3144 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3145 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3146 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3147 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3148 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3153 vt510pc|DEC VT510 w/PC keyboard,
3155 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3160 # The VT520 is a monochrome text terminal capable of managing up to
3161 # four independent sessions in the terminal. It has multiple ANSI
3162 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3163 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3164 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3166 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3167 # [Alt]/[Print Screen] depending upon which keyboard and which
3168 # terminal mode is being used. If Set-Up has been disabled or
3169 # assigned to an unknown key, Set-Up may be entered by pressing
3170 # [F3] as the first key after power up, regardless of keyboard type.
3172 use=ansi+rca, use=vt420, use=ansi+tabs,
3177 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3178 # Keyboard, which replaces the old LK41R-AA keyboard.
3180 # In trying to get the function keys to work, I had to cobble my own
3181 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3182 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3183 # I seem to get them all -Mike Gran
3184 vt520ansi|Boundless VT520 ANSI,
3185 use=ansi+rca, use=vt420f, use=vt220+keypad,
3188 #### VT100 emulations
3190 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3191 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3192 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3193 # that this works best with a stock vt100 entry.
3194 dec-vt100|EWAN telnet's vt100 emulation,
3197 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3198 dec-vt220|DOS tnvt200 terminal emulator,
3201 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3202 # anyone who needs PC VT340 emulation. (or anything below that level, for
3203 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3204 # RDBM systems, it includes ReGIS and Sixel support! I'm impressed...
3205 # I can send the address if requested.
3206 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3207 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3208 z340|ZSTEM VT340 terminal emulator 132col 42line,
3210 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3211 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3212 z340-nam|ZSTEM VT340 terminal emulator 132col 42line (no automatic margins),
3214 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3215 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3217 # expect-5.44.1.15/example/tkterm
3218 # a minimal subset of a VT100 (compare with "news-unk).
3220 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3221 tt|tkterm|Don Libes' tk text widget terminal emulator,
3222 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3223 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3224 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3225 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3232 # nsterm*|Apple_Terminal - AppKit Terminal.app
3234 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
3235 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
3236 # Server and Mac OS X operating systems. There is also a
3237 # "terminal.app" in GNUstep, but I believe it to be an unrelated
3238 # codebase and I have not attempted to describe it here.
3240 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
3241 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
3242 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
3243 # version supports color.
3245 # To determine the version of Terminal.app you're using by running:
3247 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
3249 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
3251 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
3253 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
3255 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3257 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3259 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3260 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3261 # might work too, but really you're on your own here since these
3262 # systems are very obsolete and I can't test them. I do welcome
3263 # patches, though :).
3267 # For GNUstep_Terminal, you're probably best off using "linux" or
3268 # writing your own terminfo.
3270 # For MacTelnet, you're on your own. It's a different codebase, and
3271 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3273 # For iTerm.app, see "iterm".
3276 # The AppKit Terminal.app descriptions all have names beginning with
3277 # "nsterm". Note that the statusline (-s) versions use the window
3278 # titlebar as a phony status line, and may produce warnings during
3279 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3280 # Ignore these warnings, or even ignore these entries entirely. Apps
3281 # which need to position the cursor or do other fancy stuff inside the
3282 # status line won't work with these entries. They're primarily useful
3283 # for programs like Pine which provide simple notifications in the
3284 # status line. Please note that non-ASCII characters don't work right
3285 # in the status line, since Terminal.app incorrectly interprets their
3286 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3287 # versions) or only accepts status lines consisting entirely of
3288 # characters from the first 256 Unicode positions (including C1 but
3291 # The Mythology* of AppKit Terminal.app:
3293 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3294 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3295 # shareware replacement for Terminal called "Stuart" which NeXT bought
3296 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3297 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3298 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3299 # capabilities for the early versions, but I believe that the
3300 # TERM_PROGRAM_VERSION may have been reset at some point.
3302 # The early versions were tailored to the NeXT character set. Sometime
3303 # after the Apple acquisition the encoding was switched to MacRoman
3304 # (initially with serious altcharset bugs due to incomplete conversion
3305 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3306 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3307 # 8-color support (initially buggy when combined with attributes, but
3308 # that was later fixed.) More recently, around Mac OS X version 10.3
3309 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3310 # some versions (for instance 133-1 which shipped with Mac OS X
3311 # version 10.4) this suffered from the <bce> bug, but that seems to
3312 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3314 # In the early days of Mac OS X the terminal was fairly buggy and
3315 # would routinely crash under load. Many of these bugs seem to have
3316 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3317 # some may still remain. This change seems to correspond to
3318 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3319 # it did previously.
3321 # * This may correspond with what actually happened, but I don't
3322 # know. It is based on guesswork, hearsay, private correspondence,
3323 # my faulty memory, and the following online sources and references:
3325 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3326 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3328 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3329 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3331 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3332 # "nsterm" to comply with the name length and case conventions and
3333 # limitations of various software packages [notably Solaris terminfo
3334 # and UNIX.] A single Apple_Terminal alias is retained for
3335 # backwards-compatibility.
3337 # * Added function key support (F1-F4). These only work in Terminal.app
3338 # version 51, hopefully the capabilities won't cause problems for people
3341 # * Added "full color" (-c) entries which support the 16-color mode in
3344 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3345 # support, so "ASCII" (-7) entries without altcharset support were
3348 # nsterm - AppKit Terminal.app
3350 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3351 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3352 # extensions. This terminfo was written to describe versions 41
3353 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3354 # version 10.1) of Terminal.app.
3356 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3357 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3358 # use, the executable for Terminal.app is:
3359 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3361 # If you're looking for a description of the full-screen system
3362 # console which runs under Apple's Darwin operating system on PowerPC
3363 # platforms, see the "xnuppc" entry instead.
3365 # There were no function keys in version 41. In version 51, there are
3366 # four working function keys (F1, F2, F3 and F4.) The function keys
3367 # are included in all of these entries.
3369 # It does not support mouse pointer position reporting. Under some
3370 # circumstances the cursor can be positioned using option-click; this
3371 # works by comparing the cursor position and the selected position,
3372 # and simulating enough cursor-key presses to move the cursor to the
3373 # selected position. This technique fails in all but the simplest
3376 # It provides partial ANSI color support (background colors interacted
3377 # badly with bold in version 41, though, as reflected in :ncv:.) The
3378 # monochrome (-m) entries are useful if you've disabled color support
3379 # or use a monochrome monitor. The full color (-c) entries are useful
3380 # in version 51, which doesn't exhibit the background color bug. They
3381 # also enable an xterm-compatible 16-color mode.
3383 # The configurable titlebar is set using xterm-compatible sequences;
3384 # it is used as a status bar in the statusline (-s) entries. Its width
3385 # depends on font sizes and window sizes, but 50 characters seems to
3386 # be the default for an 80x24 window.
3388 # The MacRoman character encoding is used for some of the alternate
3389 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3390 # disable alternate character set support entirely, and the "VT100"
3391 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3392 # graphics emulation, which seems to think the character encoding is
3393 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3394 # are useful in Terminal.app version 51, which supports UTF-8 and
3395 # other ASCII-compatible character encodings but does not correctly
3396 # implement VT100 graphics; once VT100 graphics are correctly
3397 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3398 # usable in any ASCII-compatible character encoding [except perhaps
3399 # in UTF-8, where some experts argue for disallowing alternate
3400 # characters entirely.]
3402 # Terminal.app reports "vt100" as the terminal type, but exports
3403 # several environment variables which may aid detection in a shell
3404 # profile (i.e. .profile or .login):
3407 # TERM_PROGRAM=Apple_Terminal
3408 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3409 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3411 # For example, the following Bourne shell script would detect the
3412 # correct terminal type:
3414 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3417 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3425 # In a C shell derivative, this would be accomplished by:
3427 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3428 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3429 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3430 # setenv TERM "nsterm-old"
3432 # setenv TERM "nsterm-c-7"
3437 # The '+' entries are building blocks
3438 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3439 am, bw, msgr, xenl, xon,
3440 cols#80, it#8, lines#24,
3441 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3442 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3443 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3444 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3445 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3446 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3447 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3448 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3449 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3450 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3451 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3452 %p5%t;2%;%?%p7%t;8%;m,
3453 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3454 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3456 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3457 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3458 enacs=\E(B\E)0, rmacs=^O,
3459 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3460 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3461 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3463 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3464 acsc=+\335\,\334-\366.\3770#`\327a:f\241g\261h#i
3465 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3466 \271|\255}\243~\245,
3467 enacs=\E(B\E)0, rmacs=^O,
3468 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3469 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3470 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3472 # compare with xterm+sl-twm
3473 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3474 wsl#50, use=xterm+sl-twm,
3476 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3477 op=\E[0m, use=ibm+16color,
3479 nsterm+c41|AppKit Terminal.app v41 color support,
3480 colors#8, ncv#37, pairs#64,
3481 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3483 # These are different combinations of the building blocks
3485 # ASCII charset (-7)
3486 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3489 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3490 use=nsterm+s, use=nsterm+7,
3492 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3493 use=nsterm+c41, use=nsterm+7,
3495 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3496 use=nsterm+c, use=nsterm+7,
3498 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3499 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3501 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3502 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3504 # VT100 alternate-charset (-acs)
3505 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3508 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3509 use=nsterm+s, use=nsterm+acs,
3511 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3512 use=nsterm+c41, use=nsterm+acs,
3514 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3515 use=nsterm+c, use=nsterm+acs,
3517 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3518 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3520 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3521 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3524 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3527 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3528 use=nsterm+s, use=nsterm+mac,
3530 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3531 use=nsterm+c41, use=nsterm+mac,
3533 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3534 use=nsterm+c, use=nsterm+mac,
3536 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3537 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3539 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3540 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3542 # In Mac OS X version 10.5 the format of the preferences has changed
3543 # and a new, more complex technique is needed, e.g.,
3545 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3546 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3547 # ud.init();prefs=ud.persistentDomainForName_(
3548 # "com.apple.Terminal");prefs["Window Settings"][
3549 # prefs["Default Window Settings"]]["TerminalType"
3550 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3551 # "com.apple.Terminal")' nsterm-16color
3553 # and it is still not settable from the preferences dialog. This is
3554 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3555 # in Apple's bug reporter.
3557 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3558 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3559 # vt52, vt100, vt102 and xterm.
3560 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3562 dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l,
3563 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~,
3564 kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3565 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3566 kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~,
3567 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3568 khome=\E[H, knp=\E[6~, kpp=\E[5~, rmir=\E[4l, smir=\E[4h,
3569 vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C,
3570 use=xterm+alt47, use=nsterm-c-s-acs, use=vt220+cvis,
3572 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3573 # the background color erase feature. The newer version 240.2 in Mac OS X
3574 # version 10.5 does not.
3576 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3577 # and D P Schreber comparing to nsterm-c-s-acs.
3579 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3580 # can be set in Terminal.app, e.g.,
3582 # defaults write com.apple.Terminal TermCapString nsterm-bce
3584 # and that it is not set in Terminal's preferences dialog.
3586 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3589 # * The terminal description matches the default settings.
3590 # * The keyboard is configurable via a dialog.
3591 # * By default khome, kend, knext and kprev are honored only with a
3593 # * There are bindings for control left/right arrow (but not up/down).
3594 # Added those to nsterm-16color, which is the version used for OS X 10.6
3595 # * "Allow VT100 application keypage mode" is by default disabled.
3596 # There is no way to press keypad-comma unless application mode is enabled
3598 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3599 # * CHT, REP, SU, SD are buggy.
3600 # * ECH works (also in Leopard), but is not used here for compatibility.
3601 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3602 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3603 # nsterm entry from this file to override the MacPorts (20110404) or
3604 # system (20081102) copy of this file.
3605 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3606 # dialog defaults to xterm-256color. Alternative selections are ansi,
3607 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3608 # the menu says "Declare terminal as" without promising to actually emulate
3609 # the corresponding terminals. Indeed, changing TERM does not affect the
3610 # emulation itself. This means that
3611 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3613 # + the color model is the same for each setting of TERM (does not match
3615 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3616 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3617 # + the VT52 emulation does not give a usable shell because screen-clearing
3618 # does not work as expected.
3619 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3620 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3621 # as well as unmasking F10 (which had been used in the window manager). Those
3622 # keys are listed in this entry.
3623 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3624 bce, use=nsterm-16color,
3626 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3627 # TERM_PROGRAM_VERSION=309
3628 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3629 # TERM_PROGRAM_VERSION=303
3630 nsterm-build309|Terminal.app in OS X 10.8,
3631 use=xterm+256setaf, use=nsterm-bce,
3633 # removed bogus kDC7 -TD
3634 nsterm-build326|Terminal.app in OS X 10.9,
3635 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3636 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3637 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3640 nsterm-build343|Terminal.app in OS X 10.10,
3641 kend=\EOF, khome=\EOH, use=nsterm-build326,
3643 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3645 # + no VT52 mode for cursor keys, though VT52 screen works in vttest
3646 # + f1-f4 map to pf1-pf4
3647 # + no VT220 support aside from DECTCEM and ECH
3648 # + there are no protected areas. Forget about anything above VT220.
3649 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3650 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3651 # + but bce fails for 11.6.7.2 (test repeat).
3652 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3653 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3654 # + normal (not X10 or Highlight tracking) mouse now works.
3655 # + mouse any-event works
3656 # + mouse button-event works
3657 # + in alternate screen:
3659 # mode 1047 fails to restore cursor position (do not use)
3660 # mode 1049 fails to restore screen contents (do not use)
3661 # + dtterm window-modify operations work (some messages are not printed)
3662 # + dtterm window-report gives size of window in characters/pixels as
3663 # well as state of window.
3665 # + there is no difference between cnorm/cvvis
3666 # + has dim/invis/blink (no protect of course)
3667 # + most function keys with shift/control modifiers give beep
3668 # (user can configure, but out-of-the-box is what I record)
3669 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3671 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3672 # + kLFT/kRIT work, but not up/down with shift-modifier
3673 # + there are a few predefined bindings with Alt, but no clear pattern.
3674 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3675 # Using ncurses test-program with xterm-new:
3677 # Using xterm's scripts:
3678 # + palette for 256-colors is hardcoded.
3679 # + no support for "dynamic colors"
3680 # + no support for tcap-query.
3681 nsterm-build361|Terminal.app in OS X 10.11,
3683 kmous=\E[M, use=nsterm-build343,
3685 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3686 # Comparing with build361, little has changed, except that italics work.
3687 # Direct-color is not supported, by the way.
3689 # Improved rmso/rmul -TD
3690 nsterm-build400|Terminal.app in OS X 10.13,
3691 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3692 use=ecma+italics, use=nsterm-build361,
3694 nsterm-build440|Terminal.app in MacOS 11.6.8,
3695 use=xterm+alt1049, use=nsterm-build400,
3697 # This is an alias which should always point to the "current" version
3698 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3699 use=nsterm-build440,
3705 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3706 # featureful) terminal emulator for Mac OS X. It is similar enough in
3707 # capabilities to nsterm-16color that I have derived this description from that
3708 # one, but as far as I know they share no code. Many of the features are
3709 # user-configurable, but I attempt only to describe the default configuration
3712 # According to its documentation, iTerm uses terminfo to obtain function key
3713 # definitions. For example, if it is started with TERM=xterm, it uses key
3714 # definitions from that terminal description from the local OSX machine. Those
3715 # $TERM settings may be augmented using the bookmark and profile dialogs.
3716 # However, the behavior seen with tack does not agree with either the terminfo
3717 # description or the function keys in its "xterm" profile.
3721 # reports primary DA as VT100 with AVO: \E[?1;2c
3722 # reports secondary DA as "\E[>0;95;c"
3723 # supports blink and underline
3724 # displays bold text as red
3725 # recognizes all dtterm controls for modifying/querying window
3726 # resizing via escape sequence is very slow
3727 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3728 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3729 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3732 # with ncurses test-program:
3733 # ncurses 'k' has problem in second screen; light background does not fill
3734 # with xterm scripts
3735 # can display/alter xterm-256color cube
3736 # can display/alter xterm-88color cube
3737 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3738 am, bce, hs, mir, msgr, npc, xenl, xon,
3739 cols#80, it#8, lines#24, wsl#50,
3740 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3741 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3742 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3743 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3744 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3745 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3746 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3747 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3748 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3749 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3750 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3751 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3752 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3753 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3754 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3755 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
3756 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3757 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3758 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3760 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
3761 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3762 vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3763 use=xterm+alt47, use=ansi+enq, use=xterm+sl-twm,
3764 use=vt100+keypad, use=xterm+x11mouse,
3765 use=xterm+256setaf, use=vt220+cvis,
3769 # https://iterm2.com/
3770 # https://github.com/gnachman/iTerm2
3771 # ~/Library/Preferences/com.googlecode.iterm2.plist
3772 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3776 # reports primary DA as VT100 with AVO: \E[?1;2c
3777 # reports secondary DA as "\E[>0;95;0c"
3778 # numeric keypad application mode does not work
3779 # by default, dtterm window-modifications are ignored
3780 # by default, dtterm window-reports return, but icon as "L", window as "l"
3781 # supports SD/SU, no REP, SL, SR
3782 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3783 # no improvement to XFree86 1047/1048 modes
3785 # in meta-mode, imitates xterm, sending UTF-8
3786 # special-key modifiers based on xterm use incompatible default for alt/meta
3787 # with ncurses test-program:
3789 # no improvement to ncurses 'k'
3790 # with xterm scripts:
3793 # Italic text did not work initially, apparently because upgrading did not
3794 # add/change that preference (set in Preferences, Profiles, Text). A new
3795 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3796 # option in the preferences dialog).
3798 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3799 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3800 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3801 blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
3802 kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
3803 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
3804 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
3805 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3806 kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
3807 op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
3808 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3809 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3810 %p5%t;2%;m%?%p9%t\016%e\017%;,
3811 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3812 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3813 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3814 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3815 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3816 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3817 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3818 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3819 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3820 use=xterm+alt+title, use=ecma+italics, use=iterm,
3821 use=bracketed+paste,
3823 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3825 # On PowerPC platforms, Apple's Darwin operating system uses a
3826 # full-screen system console derived from a NetBSD framebuffer
3827 # console. It is an ANSI-style terminal, and is not really VT-100
3830 # Under Mac OS X, this is the system console driver used while in
3831 # single-user mode [reachable by holding down Command-S during the
3832 # boot process] and when logged in using console mode [reachable by
3833 # typing ">console" at the graphical login prompt.]
3835 # If you're looking for a description of the Terminal.app terminal
3836 # emulator which runs under the Mac OS X Quartz windowing system (and
3837 # other AppKit-supported windowing systems,) see the "nsterm"
3840 # NOTE: Under Mac OS X version 10.1, the default login window does not
3841 # prompt for user name, instead requiring an icon to be selected from
3842 # a list of known users. Since the special ">console" login is not in
3843 # this list, you must make one of two changes in the Login Window
3844 # panel of the Login section of System Prefs to make the special
3845 # ">console" login accessible. The first option is to enable 'Show
3846 # "Other User" in list for network users', which will add a special
3847 # "Other..." icon to the graphical login panel. Selecting "Other..."
3848 # will present the regular graphical login prompt. The second option
3849 # is to change the 'Display Login Window as:' setting to 'Name and
3850 # password entry fields', which replaces the login panel with a
3851 # graphical login prompt.
3853 # There are no function keys, at least not in Darwin 1.3.
3855 # It has no mouse support.
3857 # It has full ANSI color support, and color combines correctly with
3858 # all three supported attributes: bold, inverse-video and underline.
3859 # However, bold colored text is almost unreadable (bolding is
3860 # accomplished using shifting and or-ing, and looks smeared) so bold
3861 # has been excluded from the list of color-compatible attributes
3862 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3863 # monochrome monitor.
3865 # There is one serious bug with this terminal emulation's color
3866 # support: repositioning the cursor onto a cell with non-matching
3867 # colors obliterates that cell's contents, replacing it with a blank
3868 # and displaying a colored cursor in the "current" colors. There is
3869 # no complete workaround at present [other than using the monochrome
3870 # (-m) entries,] but removing the (msgr) capability seemed to help.
3872 # The "standout" chosen was simple reverse-video, although a colorful
3873 # standout might be more aesthetically pleasing. Similarly, the bold
3874 # chosen is the terminal's own smeared bold, although a simple
3875 # color-change might be more readable. The color-bold (-b) entries
3876 # uses magenta colored text for bolding instead. The fancy color (-f
3877 # and -f2) entries use color for bold, standout and underlined text
3878 # (underlined text is still underlined, though.)
3880 # Apparently the terminal emulator does support a VT-100-style
3881 # alternate character set, but all the alternate character set
3882 # positions have been left blank in the font. For this reason, no
3883 # alternate character set capabilities have been included in this
3884 # description. The console driver appears to be ASCII-only, so (enacs)
3885 # has been excluded [although the VT-100 sequence does work.]
3887 # The default Mac OS X and Darwin installation reports "vt100" as the
3888 # terminal type, and exports no helpful environment variables. To fix
3889 # this, change the "console" entry in /etc/ttys from "vt100" to
3890 # "xnuppc-WxH", where W and H are the character dimensions of your
3891 # console (see below.)
3893 # The font used by the terminal emulator is apparently one originally
3894 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3895 # file includes descriptions for the following geometries:
3897 # Pixels Characters Entry Name (append -m for monochrome)
3898 # -------------------------------------------------------------------
3899 # 640x400 80x25 xnuppc-80x25
3900 # 640x480 80x30 xnuppc-80x30
3901 # 720x480 90x30 xnuppc-90x30
3902 # 800x600 100x37 xnuppc-100x37
3903 # 896x600 112x37 xnuppc-112x37
3904 # 1024x640 128x40 xnuppc-128x40
3905 # 1024x768 128x48 xnuppc-128x48
3906 # 1152x768 144x48 xnuppc-144x48
3907 # 1280x1024 160x64 xnuppc-160x64
3908 # 1600x1024 200x64 xnuppc-200x64
3909 # 1600x1200 200x75 xnuppc-200x75
3910 # 2048x1536 256x96 xnuppc-256x96
3912 # The basic "xnuppc" entry includes no size information, and the
3913 # emulator includes no reporting capability, so you'll be at the mercy
3914 # of the TTY device (which reports incorrectly on my hardware.) The
3915 # color-bold entries do not include size information.
3917 # The '+' entries are building blocks
3918 xnuppc+basic|Darwin PowerPC console basic capabilities,
3919 am, bce, mir, xenl, NQ,
3921 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3922 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3923 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3924 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3925 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3926 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3927 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3928 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3930 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3931 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3932 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3934 xnuppc+c|Darwin PowerPC console ANSI color support,
3935 colors#8, ncv#32, pairs#64,
3936 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3938 xnuppc+b|Darwin PowerPC console color-bold support,
3941 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3944 xnuppc+f|Darwin PowerPC console fancy color support,
3946 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3948 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3950 xnuppc+f2|Darwin PowerPC console alternate fancy color support,
3953 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3954 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3956 # Building blocks for specific screen sizes
3957 xnuppc+80x25|Darwin PowerPC console 80x25 support (640x400 pixels),
3960 xnuppc+80x30|Darwin PowerPC console 80x30 support (640x480 pixels),
3963 xnuppc+90x30|Darwin PowerPC console 90x30 support (720x480 pixels),
3966 xnuppc+100x37|Darwin PowerPC console 100x37 support (800x600 pixels),
3969 xnuppc+112x37|Darwin PowerPC console 112x37 support (896x600 pixels),
3972 xnuppc+128x40|Darwin PowerPC console 128x40 support (1024x640 pixels),
3975 xnuppc+128x48|Darwin PowerPC console 128x48 support (1024x768 pixels),
3978 xnuppc+144x48|Darwin PowerPC console 144x48 support (1152x768 pixels),
3981 xnuppc+160x64|Darwin PowerPC console 160x64 support (1280x1024 pixels),
3984 xnuppc+200x64|Darwin PowerPC console 200x64 support (1600x1024 pixels),
3987 xnuppc+200x75|Darwin PowerPC console 200x75 support (1600x1200 pixels),
3990 xnuppc+256x96|Darwin PowerPC console 256x96 support (2048x1536 pixels),
3991 cols#0x100, lines#96,
3993 # These are different combinations of the building blocks
3995 xnuppc-m|darwin-m|Darwin PowerPC console (monochrome),
3998 xnuppc|darwin|Darwin PowerPC console (color),
3999 use=xnuppc+c, use=xnuppc+basic,
4001 xnuppc-m-b|darwin-m-b|Darwin PowerPC console (monochrome w/color-bold),
4004 xnuppc-b|darwin-b|Darwin PowerPC console (color w/color-bold),
4005 use=xnuppc+b, use=xnuppc+c,
4007 xnuppc-m-f|darwin-m-f|Darwin PowerPC console (fancy monochrome),
4010 xnuppc-f|darwin-f|Darwin PowerPC console (fancy color),
4011 use=xnuppc+f, use=xnuppc+c,
4013 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC console (alternate fancy monochrome),
4016 xnuppc-f2|darwin-f2|Darwin PowerPC console (alternate fancy color),
4017 use=xnuppc+f2, use=xnuppc+c,
4019 # Combinations for specific screen sizes
4020 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC console (monochrome) 80x25,
4021 use=xnuppc+80x25, use=xnuppc+basic,
4023 xnuppc-80x25|darwin-80x25|Darwin PowerPC console (color) 80x25,
4024 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
4026 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC console (monochrome) 80x30,
4027 use=xnuppc+80x30, use=xnuppc+basic,
4029 xnuppc-80x30|darwin-80x30|Darwin PowerPC console (color) 80x30,
4030 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
4032 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC console (monochrome) 90x30,
4033 use=xnuppc+90x30, use=xnuppc+basic,
4035 xnuppc-90x30|darwin-90x30|Darwin PowerPC console (color) 90x30,
4036 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
4038 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC console (monochrome) 100x37,
4039 use=xnuppc+100x37, use=xnuppc+basic,
4041 xnuppc-100x37|darwin-100x37|Darwin PowerPC console (color) 100x37,
4042 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
4044 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC console (monochrome) 112x37,
4045 use=xnuppc+112x37, use=xnuppc+basic,
4047 xnuppc-112x37|darwin-112x37|Darwin PowerPC console (color) 112x37,
4048 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
4050 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC console (monochrome) 128x40,
4051 use=xnuppc+128x40, use=xnuppc+basic,
4053 xnuppc-128x40|darwin-128x40|Darwin PowerPC console (color) 128x40,
4054 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
4056 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC console (monochrome) 128x48,
4057 use=xnuppc+128x48, use=xnuppc+basic,
4059 xnuppc-128x48|darwin-128x48|Darwin PowerPC console (color) 128x48,
4060 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
4062 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC console (monochrome) 144x48,
4063 use=xnuppc+144x48, use=xnuppc+basic,
4065 xnuppc-144x48|darwin-144x48|Darwin PowerPC console (color) 144x48,
4066 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
4068 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC console (monochrome) 160x64,
4069 use=xnuppc+160x64, use=xnuppc+basic,
4071 xnuppc-160x64|darwin-160x64|Darwin PowerPC console (color) 160x64,
4072 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
4074 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC console (monochrome) 200x64,
4075 use=xnuppc+200x64, use=xnuppc+basic,
4077 xnuppc-200x64|darwin-200x64|Darwin PowerPC console (color) 200x64,
4078 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
4080 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC console (monochrome) 200x75,
4081 use=xnuppc+200x75, use=xnuppc+basic,
4083 xnuppc-200x75|darwin-200x75|Darwin PowerPC console (color) 200x75,
4084 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
4086 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC console (monochrome) 256x96,
4087 use=xnuppc+256x96, use=xnuppc+basic,
4089 xnuppc-256x96|darwin-256x96|Darwin PowerPC console (color) 256x96,
4090 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
4092 ######## DOS/WINDOWS
4093 # CRT is shareware. It implements some xterm features, including mouse.
4094 crt|crt-vt220|CRT 2.3 emulating VT220,
4097 hts=\EH, use=vt100+enq, use=vt220-base, use=ecma+color,
4099 # SecureCRT 8.7.3.2279
4100 # 8.7.3 was released 2020/08/11
4102 # VanDyke Software, Inc.
4104 # Advertised features:
4105 # Xterm 24-bit color
4107 # Double-size characters
4108 # Xterm extensions for mouse support and changing title bar
4109 # Emulates VT100, VT102, VT220, VT320, Linux console, SCO ANSI,
4110 # TN3270, TVI910, TVI925, Wyse 50/60, and ANSI.
4112 # Added ANSI sc/rc and REP in 2019/12/17
4113 # Added TVI910/ TVI925 in 2019/11/20
4116 # Emulate "Xterm", using "ANSI with 256color"
4117 # TERM=xterm-256color
4120 # DA1 \E[?62;1;2;6;7;8;9c (vt220 with DRCS and NRCS)
4122 # double-sized characters do not work
4123 # Menu-1 fails (window resizes to 132-columns, but does not repaint)
4124 # NRCS fails (tried French, but none of the replacements worked)
4125 # VT100 line-drawing works, except the C/R, etc., are an hline.
4126 # VT52 works except for S8C1T bug.
4127 # RIS hangs the terminal.
4128 # Local SRM does not echo.
4129 # Some of the VT320/VT220 status reports work, not locator or DECXCPR
4130 # DECUDK works if I press shift.
4131 # Fails CHT, CNL, CPL
4132 # Does not honor bce with ECH
4133 # ERM/SPA does not work
4134 # REP has 11 +'s except for final 2 +'s, like PuTTY.
4136 # DECRPM does not respond.
4137 # dtterm modify/report operations do not work
4138 # Alternate screen works.
4140 # highlight tracking does not work.
4141 # any event tracking does not work, but
4142 # button event tracking does work.
4143 # DEC locator does not work.
4144 # SGR coordinates does not work.
4146 # reset6 does reset to 80-columns
4147 # ncurses RGB edit does not work.
4148 # direct colors don't work, probably needs semicolons.
4150 # blink works, but not dim or invis
4151 # no italics or crossed-out
4153 # 256color handles "-r" option (but test/ncurses menu d does not alter)
4154 # dynamic colors queries do not work, though it seems some can be set.
4155 # resize.pl gets no reply, resize.sh needs fix for no reply.
4156 scrt|securecrt|SecureCRT emulating xterm-256color,
4158 bel@, cvvis@, kcbt=\E[Z, kent=\EOM, use=linux+kbs,
4159 use=vt220+pcedit, use=xterm+256setaf, use=ecma+index,
4160 use=ansi+rep, use=xterm+keypad, use=xterm+pcfkeys,
4165 # 11.24 was released 2020/08/13
4166 # Celestial Software
4168 # Advertised features:
4169 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT)
4170 # Double-size characters
4171 # Xterm extensions for mouse support
4172 # Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi,
4173 # ANSIBBS, WYSE60, TeleVideo 950.
4179 # DA1: \E[?62;1;2;6;7;8;9;15;22c (VT200 with DRCS, UDK, NRCS)
4182 # + NRCS tests do not work
4183 # + DECUDK test fails
4184 # + VT100 double-sized characters work
4185 # menu-1 autowrap does not work
4186 # supports blinking text
4187 # VT220 DECSCA last screen (ignoring ECH, etc), leaves fill on top/left
4188 # VT220 device status reports fail, except operating status
4189 # 8-bit controls work
4190 # xterm alternate screen recognized, but cursor restored incorrectly
4191 # xterm mouse (normal, any event, button event) works
4192 # xterm highlight-mouse does not work properly, confused with any-event
4193 # does not recognize SGR-mouse mode
4194 # supports xterm window-modifiny/reporting controls
4195 # supports ECMA-48 cursor movement except HPR
4196 # supports REP and SD, but not ECMA-48 SL, SR, SU
4198 # italics and crossed-out do not work
4199 # supports xterm-style modified function-keys, using X11R6 F1-F4.
4200 # does not support modified cursor-keys or editing-keys
4201 # uses VT220-style Home/End
4202 # if alt-keys are enabled,
4203 # meta-mode sends escape rather than shifting, in 7-bit mode
4204 # meta-mode does the expected shifting in 8-bit mode
4206 # supports 256-colors, including changing palette (ncurses menu d works)
4207 # supports UTF-8, but honors VT100 line-drawing
4208 absolute|Absolute Telnet emulating xterm,
4209 kcbt=\E[Z, use=ecma+index, use=linux+kbs, use=ansi+rep,
4210 use=vt220+pcedit, use=xterm+keypad, use=xterm+app,
4211 use=xterm+pcf0, use=xterm+256color, use=xterm+x11mouse,
4215 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
4217 # PuTTY 0.78 (September 2020, tested 12 August 2023)
4218 # Testing with tack:
4219 # implements cross-out text (shortly after 0.74)
4220 # restore kLFT as kLFT5, etc. (mentioned in October 2021)
4221 # does not support direct-colors (mentioned in July 2021)
4223 # PuTTY 0.74 (27 June 2020)
4226 # PuTTY 0.73 (September 2019)
4227 # Testing with tack:
4228 # does not implement italics
4229 # does not implement cross-out text
4230 # its settings dialog allows some of the VT100 line-drawing tests to pass
4231 # (not the padding test, though)
4232 # Testing with vttest:
4233 # xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented.
4234 # does not implement protected areas
4235 # does not implement SL/SR
4237 # PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also
4238 # changed longstanding keypad assignments, so that these no longer apply:
4239 # kLFT=\E[D, kRIT=\E[C, kb2=\E[G,
4241 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
4242 # in 2017 (0.70) -TD
4244 # Comparing with 0.51, vttest is much better (only a few problems with the
4245 # cursor position reports and wrapping).
4247 # PuTTY 0.51 (14 December 2000)
4249 # This emulates VT100 + VT52 (plus a few VT220 features: ech, SRM, DECTCEM, as
4250 # well as SCO and Atari, color palettes from Linux console). Reading the code,
4251 # it is intended to be VT102 plus selected features. By default, it sets $TERM
4252 # to xterm, which is incorrect, since several features are misimplemented:
4254 # Alt+key always sends ESC+key, so 'km' capability is removed.
4256 # Control responses, wrapping and tabs are buggy, failing a couple of
4257 # screens in vttest.
4259 # xterm mouse support is not implemented (unreleased version may).
4261 # Several features such as backspace/delete are optional; this entry documents
4262 # the default behavior. None of the combinations of keyboard settings match
4263 # those used for xterm -TD
4265 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
4266 # but implements it incorrectly as mentioned here:
4267 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
4268 putty|PuTTY terminal emulator,
4269 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
4270 colors#8, it#8, ncv#22, pairs#64, U8#1,
4271 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4272 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
4273 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4274 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
4275 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4276 dch=\E[%p1%dP, dch1=\E[P,
4277 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
4278 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
4279 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
4280 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
4281 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
4282 %%G\340\202\242\E%%@%e%p1%c%;,
4283 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4284 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
4285 home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\n,
4286 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
4287 %02x%p4%{255}%*%{1000}%/%02x,
4288 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
4289 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4290 kcuu1=\EOA, kind=\E[B, kri=\E[A, kspd=^Z, nel=\r\n, oc=\E]R,
4291 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4292 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmpch=\E[10m,
4293 rmso=\E[27m, rmul=\E[24m,
4294 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
4295 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
4296 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4297 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4298 %;m%?%p9%t\016%e\017%;,
4299 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
4300 smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
4301 vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit,
4302 use=ansi+tabs, use=ansi+rep, use=ecma+index,
4303 use=xterm+alt1049, use=xterm+sm+1006, use=putty+fnkeys,
4304 use=vt102+enq, use=xterm+sl, use=vt100+fnkeys,
4305 use=putty+keypad, use=vt220+cvis, use=bracketed+paste,
4306 use=putty+cursor, use=ecma+strikeout,
4307 # older versions (e.g., before 0.71) of PuTTY used a shift-modifier to toggle
4308 # between normal- and application-mode for the cursor-keys. That was dropped,
4309 # and a few years later (after 0.74) restored as the control-modifier.
4310 putty+cursor|PuTTY modified cursor-keys,
4311 kDN5=\E[B, kLFT5=\E[D, kRIT5=\E[C, kUP5=\E[A,
4312 putty+keypad|PuTTY numeric keypad,
4313 kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
4314 kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
4315 kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp,
4317 vt100-putty|Reset PuTTY to pure VT100,
4318 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
4320 putty-256color|PuTTY 0.58 with xterm 256-colors,
4321 use=xterm+256setaf, use=putty,
4322 putty-noapp|putty with cursor keys in normal mode,
4323 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4324 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
4327 # One of the keyboard selections is "VT100+".
4328 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
4329 putty-vt100|VT100+ keyboard layout,
4330 use=putty+fnkeys+vt100, use=putty,
4332 putty-sco|putty with SCO function keys,
4333 use=putty+fnkeys+sco, use=putty,
4335 # PuTTY has more than one section in its Keyboard configuration:
4336 # a) backspace/delete, which we ignore since that choice largely depends on
4337 # whether one matches Unix and BSD or Linux.
4338 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
4339 # are unrelated to rxvt's actual settings.
4340 # c) function keys and keypad - this is the interesting part. None of the
4341 # selections match any of their respective namesakes, but they are shown
4342 # here to help users who expect that the selections do what is implied.
4344 # This is the default setting for PuTTY
4345 putty+fnkeys|fn-keys for PuTTY,
4346 use=putty+fnkeys+esc,
4348 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
4349 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4350 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4351 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
4352 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
4353 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4355 putty+fnkeys+linux|Linux fn-keys for PuTTY,
4356 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4357 use=putty+fnkeys+esc,
4359 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
4360 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4361 use=putty+fnkeys+esc,
4363 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
4364 use=putty+fnkeys+esc,
4366 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
4368 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
4369 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
4370 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4371 kf9=\EOX, use=putty+fnkeys+esc,
4373 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
4375 # Use modifiers to obtain function keys past 12:
4378 # F25-F36 - control/alt
4379 # F37-F48 - control/shift
4381 putty+fnkeys+sco|SCO fn-keys for PuTTY,
4382 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4383 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4384 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4385 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4386 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4387 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4388 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4389 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4390 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4391 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4392 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4393 kich1=\E[L, knp=\E[G, kpp=\E[I,
4396 # https://github.com/mintty/mintty
4398 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
4399 # 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but
4400 # larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc).
4402 # Version 3.0 responds to DA as a VT400, however it does not implement the
4403 # application keypad. The assignment of cursor-keys versus modifiers differs
4404 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
4406 # Thomas Wolff suggested these extensions:
4407 # blink2 turn on rapid blinking
4408 # blink0 turn off blinking
4409 # norm turn off bold and half-bright mode
4410 # opaq turn off blank mode
4411 # smul2 begin double underline mode
4412 # smol begin overline mode
4413 # rmol exit overline mode
4414 # Font0 use default font
4415 # Font1 use alternative font 1
4417 # Font10 use alternative font 10
4418 # setal set (under)line color
4419 # ol set default (under)line color
4420 # overs overstrike (print characters over each other)
4422 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4423 mintty|Cygwin Terminal,
4424 setal=\E[5%p1%dm, use=xterm+256color,
4426 mintty-direct|Cygwin Terminal direct-color,
4427 use=kitty+setal, use=xterm+direct, use=mintty+common,
4428 mintty+common|shared capabilities for mintty,
4430 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4431 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4432 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1:2m,
4433 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4434 Smulx=\E[4:%p1%dm, blink2=\E[6m, norm=\E[22m,
4435 opaq=\E[28m, smul2=\E[21m, use=linux+kbs, use=ansi+rep,
4436 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4437 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4438 use=ecma+italics, use=xterm-basic, use=bracketed+paste,
4440 # 2019-06-09: These capabilities are commented-out for compatibility with
4441 # existing releases 5.9-6.1, and may be considered for inclusion after the
4442 # release of ncurses 6.2:
4460 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4461 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4462 # (communication program) which supports:
4464 # - Serial port connections.
4465 # - TCP/IP (telnet) connections.
4466 # - VT100 emulation, and selected VT200/300 emulation.
4467 # - TEK4010 emulation.
4468 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4470 # - Scripts using the "Tera Term Language".
4471 # - Japanese and Russian character sets.
4473 # The program does not come with terminfo or termcap entries. However, the
4474 # emulation (testing with vttest and ncurses) is reasonably close to VT100 (no
4475 # VT52 or doublesize character support; blinking is done with color). Besides
4476 # the HPA, VPA extensions it also implements CPL and CNL.
4478 # All of the function keys can be remapped. This description shows the default
4479 # mapping, as installed. Both VT100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4480 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4481 # is laid out like VT220, rather than the face codes on the PC keyboard, i.e,
4489 # ANSI colors are implemented, but cannot be combined with video attributes
4490 # except for reverse.
4492 # No fonts are supplied with the program, so the acsc string is chosen to
4493 # correspond with the default Microsoft terminal font.
4495 # Tera Term recognizes some xterm sequences, including those for setting and
4496 # retrieving the window title, and for setting the window size (i.e., using
4497 # "resize -s"), though it does not pass SIGWINCH to the application if the
4498 # user resizes the window with the mouse.
4499 teraterm2.3|Tera Term Pro 2.3,
4502 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4503 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4504 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4505 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C,
4506 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4507 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4508 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l,
4509 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kf1=\E[11~,
4510 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4511 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4512 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4513 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4514 kf8=\E[19~, kf9=\E[20~, op=\E[100m, rev=\E[7m, ri=\EM,
4515 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4516 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt220+vtedit,
4517 use=vt100+enq, use=klone+color, use=vt100,
4520 # Version 4.59 has regular VT100 line-drawing (so it is no longer necessary
4521 # to choose a Windows OEM font).
4523 # Testing with tack:
4524 # - it does not have xenl (suppress that)
4525 # - underline seems to work with color (modify ncv).
4526 # Testing with vttest:
4527 # - wrapping differs from VT100 (menu 1).
4528 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4530 # - it recognizes the dtterm window controls for reporting size in
4531 # characters and pixels.
4532 # - it passes SIGWINCH.
4533 teraterm4.59|Tera Term Pro 4.59,
4536 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4537 kmous=\E[M, use=teraterm2.3,
4541 # Testing with tack:
4542 # - no bell (flash works)
4543 # - bold is yellow, blink is red.
4544 # - default keyboard sends ^? for Delete, can be configured for kdch1
4546 # Testing with vttest:
4547 # + autowrap has problems...
4548 # + color-tests for bce feature match xterm's behavior
4549 # + handles most of xterm's mouse-controls other than highlight-tracking.
4550 # xterm's SGR 1006 works.
4551 # + partial support for DEC locator-events
4552 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4553 # + has a "Tek" window, but does not work with vttest's examples
4554 # + supports the dtterm window modify/report controls
4555 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4557 # + VT220 screen-display tests are ok
4560 # + recognizes xterm's original direct-colors sequences, but result is
4562 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4563 teraterm4.97|Tera Term Pro 4.97,
4564 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4565 teraterm-256color|TeraTerm with xterm 256-colors,
4566 use=xterm+256setaf, use=teraterm,
4573 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4574 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4577 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4578 # for casual (occasional) use. Also fails several of the vttest screens,
4579 # but that is not unusual for VT100 "emulators".
4580 # b) Does not implement VT100 keypad
4581 # c) Recognizes a subset of VT52 controls.
4582 ms-vt100|MS telnet imitating DEC VT100,
4584 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4585 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4586 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4587 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4588 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4590 # Tested with Windows 2000, the telnet application runs in a console window,
4591 # also using 'Terminal' font.
4594 # a) This version has no function keys or numeric keypad. Unlike the older
4595 # version, the numeric keypad is entirely ignored.
4596 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4597 ms-vt100-color|vtnt|windows 2000 ANSI (sic),
4599 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4602 # Based on comments from Federico Bianchi:
4604 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4605 # scheme for PF keys.
4607 # and PuTTY wishlist:
4609 # The modifiers are represented as the codes listed above, prefixed to
4610 # the normal sequences. If the modifier is pressed alone, its sequence
4611 # is transmitted twice in succession. If multiple modifiers apply,
4612 # they're transmitted in the order shift, control, alt.
4617 ms-vt100+|vt100+|windows XP VT100+ (sic),
4618 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4619 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4620 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4621 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4622 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4623 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4624 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4625 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4626 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4627 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4628 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4629 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4630 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4631 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4632 knp=\E/, kpp=\E?, use=ms-vt100-color,
4634 ms-vt-utf8|vt-utf8|UTF-8 flavor of VT100+,
4637 # Windows Terminal (Preview)
4638 # https://github.com/microsoft/terminal
4640 # Windows 10 22H2 (also Windows 11)
4641 # Version 1.16.10261.0
4643 # - Windows Terminal #1553: "Feature Request: Mouse/Touch/Pointer Bindings
4644 # (like middle-click paste, right-click context menu, etc.)", compare to
4645 # https://learn.microsoft.com/en-us/windows/console/mouse-event-record-str
4646 # This appears to be related to a problem with its implementation of the
4647 # Console API; the mouse does not work in a "Command Window" (e.g., as used
4648 # in the ncurses MinGW driver), although escape sequences work.
4651 # Version 1.9.1942.0
4653 # This has longstanding issues with CR/LF mapping, e.g.,
4654 # - first reported by Juergen Pfeifer August 13, 2020, with workaround
4655 # - Windows Terminal #8303 "Updates to ms-terminal terminal type in terminfo to
4657 # - Windows Terminal #6733 "Midnight Commander (mc) output is screwed when
4658 # using the 'ms-terminal' as $TERM"
4660 # still seen in testing during May-July 2021. As a workaround, this terminal
4661 # description sets cud1 to an escape sequence rather than just \r.
4663 # Using TERM=xterm-256color shows a number of problems.
4664 # A few are seen only in the WSL2 environment.
4667 # - flash does not work.
4668 # - video attribute blink does not work.
4669 # - video attribute invis does not work in WSL2.
4670 # - italics sitm/ritm do not work in WSL2.
4671 # - crossed-out smxx/rmxx do not work in WSL2.
4672 # - reloading colors via initp interchanges red/blue.
4673 # - does not implement OSC 104, which is used for resetting colors in xterm.
4674 # - does not support numeric keypad application mode.
4675 # - control-modifier (without alt/shift) does not work for special keys.
4676 # - meta-key sends escape character rather than acting as a meta key.
4679 # - identifies itself as a VT100.
4680 # - cursor movement (menu 1) does not work properly, e.g., for wrapping.
4681 # - does not support 8-bit controls.
4682 # - does not support VT420 rectangles.
4683 # - does not support VT420 left/right margins.
4684 # - ECMA-48 cursor-movement works.
4685 # - does not support X10 mouse, or mouse highlight tracking.
4686 # - SGR mouse mode 1006 works.
4687 # - any-event mouse mode shows no focus-in/focus-out events.
4688 # - alternate screen 47/48 modes do not work, nor do 1047/1048.
4689 # - alternate screen 1049 mode works.
4690 # - none of the window report/modify operations work.
4691 # - none of the DECRPM/DECRQM reporting operations work.
4694 # - 256colors2.pl -r, -i and -q options work.
4695 # - dynamic colors do not work.
4696 # - paste64.pl does not work, i.e., bracketed-paste.
4697 # - tcapquery.pl does not work.
4700 # Version 0.2.1831.0
4702 # The task manager shows this as "OpenConsole.exe", which differs
4703 # from the "Windows Command Processor" used for the command-prompt.
4705 # The settings dialog does not work (unless the end user expects to open
4706 # profiles.json in Visual Studio). There is no documentation, of course.
4708 # Testing via an ssh connection, using openssh:
4709 # - the program sets TERM to cygwin if the tab is set to PowerShell,
4710 # and to xterm-256color if "Legacy". However, in the latter, more tests
4711 # fail in vttest, which does not pay attention to TERM.
4713 # - menu 1 (tests for cursor movement) misbehaves like command-prompt
4714 # - primary DA says this is a vanilla VT100
4715 # - does not flush response to primary DA, leaving a ^M on the end when
4716 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
4717 # work properly in this test.
4718 # - in the generic VT100 tests, there are problems with character sets
4719 # (diamond shows as a double-width character, DEL as two replacement-chars).
4720 # - outside of the generic VT100 tests, the program does poorly because most
4721 # of the features are missing.
4722 # - ECH does not work properly
4723 # - a few generic xterm features are supported (set window title), but
4724 # others are missing (such as the mouse).
4725 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
4727 # - blink, dim, bold, invis, protect do not work
4728 # - bce works (but per vttest, with ED, EL, not ECH)
4729 # - does not support keypad application mode
4730 # - implements most of the xterm modified keys; sometimes modifiers are ignored
4731 # or simply incorrect
4732 # - sends escape+key rather than implementing meta mode
4734 # - color palette can be altered, but OSC 104 for resetting does not work
4735 # - crashed with a script used for testing NRCS.
4736 # - does not recognize either xterm+direct or xterm+indirect escapes.
4737 ms-terminal|Windows10 terminal,
4739 cud1=\E[B, kcbt=\E[Z, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@,
4740 Cr@, Ms@, use=linux+kbs, use=xterm+256color,
4741 use=xterm+pcfkeys, use=ansi+rep, use=xterm+sm+1006,
4742 use=ecma+index, use=ecma+italics, use=ecma+strikeout,
4743 use=xterm-basic, use=xterm+tmux,
4746 # Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/).
4749 # - fixes menu 1 problem with wrapping
4751 # - fixes menu 8 problem with delete-character
4753 # - keypad application mode still does not work; PF1-PF4 are not assigned.
4754 # - DECRQM/DECRPM do not work
4755 # - xterm mouse features:
4756 # - SGR coordinates work; the other modes do not (see vscode #96058)
4757 # - focus-events are not sent
4758 # - mouse highlight tracking does not send button event
4760 # - little or no change since previous review
4762 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
4763 # https://code.visualstudio.com/docs/editor/integrated-terminal
4765 # This sets TERM to xterm-256color, which is a little more successful than
4769 # - menu 1 (cursor movement) has problems with wrapping
4770 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response
4771 # - menu 8 (insert/delete char/line) has problem with delete-character
4772 # - like Windows Terminal, fails the ECH test: neither supports DECALN
4773 # However, the bce test with ECH works.
4774 # - does not support keypad application mode
4775 # - supports most xterm mode controls (except DEC Locator Events)
4776 # - REP, SL/SL do not work, but SD/SU work.
4777 # - the alternate-screen tests fail because it does not support DECALN
4778 # - window modify/report is not supported
4779 # - supports some VT320 presentation reports
4781 # - does not support blinking text
4782 # - implements most of the xterm modified keys, with some exceptions:
4783 # - pageup/pagedown do not send escapes
4784 # - alt cursor left/right send escape-b and escape-f
4785 # - sends UTF-8 like xterm for meta mode
4787 # - mouse mode is not reset by reset-sequence
4788 # - supports italics and dim, but not cross-out or double-underline
4789 # - color-palette cannot be changed
4790 vscode|xterm.js|Visual Studio Code terminal using xterm.js,
4792 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=linux+kbs,
4793 use=xterm+256setaf, use=ecma+index, use=xterm+sm+1006,
4794 use=xterm+pcfkeys, use=ecma+italics, use=xterm-basic,
4795 use=bracketed+paste,
4796 vscode-direct|Visual Studio Code with direct-colors,
4797 use=xterm+indirect, use=vscode,
4799 ######## X TERMINAL EMULATORS
4802 # You can add the following line to your .Xdefaults to change the terminal type
4803 # set by the xterms you start up to my-xterm:
4805 # *termName: my-xterm
4807 # System administrators can change the default entry for xterm instances
4808 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4809 # case, xterm will detect and reject an invalid terminal type, falling back
4810 # to the default of xterm.
4813 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4814 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4815 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4816 # as these seem not to work -- esr)
4817 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4818 OTbs, am, km, mir, msgr, xenl, xon,
4819 cols#80, it#8, lines#65,
4820 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4821 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4822 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4823 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4824 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4825 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4826 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4827 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4828 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4829 smso=\E[7m, smul=\E[4m,
4830 # csl is extension which clears the status line
4831 x10term+sl|status-line for X10 xterm,
4833 dsl=\E[?H, fsl=\E[?F, tsl=\E[?E\E[?%i%p1%dT, csl=\E[?E,
4835 # Compatible with the R5 xterm
4836 # (from the XFree86 3.2 distribution, <blink=@> removed)
4837 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4838 # corrected typos in rs2 string - TD
4840 xterm-r5|xterm R5 version,
4841 OTbs, am, km, msgr, xenl,
4842 cols#80, it#8, lines#24,
4843 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4844 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4845 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4846 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4847 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4848 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4849 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4850 kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[31~, kel=\E[8~, kf0=\EOq,
4851 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4852 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~,
4853 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
4854 kil1=\E[30~, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
4855 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4856 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4858 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4860 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4861 smul=\E[4m, tbc=\E[3g, use=vt220+pcedit, use=vt100+enq,
4864 # Compatible with the R6 xterm
4865 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4866 # added khome/kend, hts based on the R6 xterm code - TD
4867 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4868 # for compatibility with other emulators).
4869 xterm-r6|xterm X11R6 version,
4870 OTbs, am, km, mir, msgr, xenl,
4871 cols#80, it#8, lines#24,
4872 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4873 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4874 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4875 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4876 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4877 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4878 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4880 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4881 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
4882 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4883 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4884 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4885 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4886 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em,
4887 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
4888 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4889 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4890 sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
4891 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=xterm+alt47,
4892 use=vt220+vtedit, use=xterm+kbs, use=vt100+enq,
4893 xterm-old|antique xterm version,
4895 # The monochrome version began as a copy of "xtermm" (from Solaris), and was
4896 # initially part of the xterm sources (in XFree86). But "xterm" continued to
4897 # grow, while "xterm-mono" had none of the newer features. Additionally,
4898 # inheriting from "xtermm" runs into several problems, including different
4899 # function keys as well as the fact that the mouse support is not compatible.
4900 # This entry restores the original intent, intentionally not an alias to
4901 # simplify maintenance -TD
4902 xterm-mono|monochrome xterm,
4904 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4905 # The name has been changed and some aliases have been removed.
4906 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4907 OTbs, am, bce, km, mir, msgr, xenl, XT,
4908 cols#80, it#8, lines#24, ncv@,
4909 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4910 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
4911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4912 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4914 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4915 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4916 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4917 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4919 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4920 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4921 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4922 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4923 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4924 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4925 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4926 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4927 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4928 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
4929 rmso=\E[27m, rmul=\E[24m, rs1=^O,
4930 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
4931 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4933 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4935 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4936 %;m%?%p9%t\016%e\017%;,
4937 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
4938 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4939 vpa=\E[%i%p1%dd, use=xterm+alt47, use=xterm+kbs,
4940 use=vt100+enq, use=ecma+color, use=vt220+cvis,
4943 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4944 # codes for F1-F4 except while in VT220 mode.
4945 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4946 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4948 # This version was released in XFree86 3.3.3 (November 1998).
4949 # Besides providing printer support, it exploits a new feature that allows
4950 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4951 # -- the distribution contained incorrect khome/kend values -TD
4952 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4953 blink=\E[5m, ich1@, invis=\E[8m,
4954 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4955 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4956 rs2=\E[!p\E[?3;4l\E[4l\E>,
4957 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4958 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4959 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4962 # This version was released in XFree86 4.0.
4963 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4965 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4966 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4967 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4968 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4969 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4970 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4971 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4972 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4973 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4974 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4975 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4976 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4977 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4978 kf48=\E[24;6~, khome=\EOH,
4979 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4981 use=xterm+alt1049, use=xterm-xf86-v333,
4983 # This version was released in XFree86 4.3.
4984 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4985 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4986 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4988 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4989 %p7%t;8%;m%?%p9%t\016%e\017%;,
4992 # Controlling the cursor-visibility is not a "new" feature, but was generally
4993 # neglected in terminal emulators until the mid-1990s. These would work for
4994 # the hardware terminals, or for more recent emulators, e.g., xterm.
4995 vt220+cvis|DECTCEM VT220 cursor-visibility,
4996 civis=\E[?25l, cnorm=\E[?25h,
4997 vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility,
4998 civis=\233?25l, cnorm=\233?25h,
4999 # The first block is for terminals which did not support blinking cursor.
5000 att610+cvis0|AT&T 610 cursor-visibility,
5001 civis=\E[?25l, cnorm=\E[?12l\E[?25h,
5002 att610+cvis|AT&T 610 cursor-visibility with blink,
5003 civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
5005 # This version was released in XFree86 4.4.
5006 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
5007 use=att610+cvis, use=ecma+index, use=xterm-xf86-v43,
5009 xterm-xfree86|xterm terminal emulator (XFree86),
5012 xterm+nofkeys|building block for xterm fkey-variants,
5014 kcbt=\E[Z, kent=\EOM, nel=\EE, use=ecma+index,
5015 use=ansi+rep, use=ecma+strikeout, use=vt420+lrmm,
5016 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics,
5017 use=xterm+keypad, use=xterm-basic,
5019 xterm-p370|xterm patch #370,
5021 kcbt=\E[Z, kent=\EOM, nel=\EE,
5022 rv=\E\\[41;[1-6][0-9][0-9];0c,
5023 xr=\EP>\\|XTerm\\([1-9][0-9]+\\)\E\\\\,
5024 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
5025 use=xterm+pcfkeys, use=xterm+nofkeys,
5026 use=bracketed+paste, use=report+version,
5029 xterm-p371|xterm patch #371,
5030 use=dec+sl, use=xterm-p370,
5032 # This version reflects the current xterm features.
5033 xterm-new|modern xterm terminal emulator,
5036 # This fragment is for people who cannot agree on what the backspace key
5037 # should send. The ncurses configure script option "--with-xterm-kbs" can
5038 # set it to BS (standard) or DEL (Linux's notion of "vt220"). xterm provides
5039 # either, depending on how the pseudoterminals are configured.
5040 xterm+kbs|fragment for backspace key,
5043 # Use this fragment for terminals that always use DEL for "backspace".
5044 linux+kbs|fragment for "backspace" key,
5047 # This fragment describes as much of XFree86 xterm's "pc-style" function
5048 # keys as will fit into terminfo's 60 function keys.
5051 # ---------------------------------
5058 # 8 Shift + Alt + Control
5059 # ---------------------------------
5060 # The meta key may also be used as a modifier in this scheme, adding another
5061 # bit to the parameter.
5062 xterm+pcfkeys|xterm fragment for PC-style fkeys,
5063 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
5066 # The xterm ctrlFKeys resource defaults to 10, so without the "pc-style"
5067 # feature, e.g., setting the modifyCursorKeys and modifyFunctionKeys resources
5068 # to -1 to disable them, one gets 42 function-keys on a 12-function-key
5071 # kf11 shift f1 = \E[23~
5072 # kf21 control f1 = \E[42~
5073 # kf31 shift control f1 = \E[52~
5074 xterm+nopcfkeys|fragment without PC-style fkeys,
5075 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5076 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5077 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
5078 kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~,
5079 kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~,
5080 kf28=\E[49~, kf29=\E[50~, kf3=\E[13~, kf30=\E[51~,
5081 kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~,
5082 kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~,
5083 kf39=\E[60~, kf4=\E[14~, kf40=\E[61~, kf41=\E[62~,
5084 kf42=\E[63~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5085 kf8=\E[19~, kf9=\E[20~,
5087 xterm+noapp|fragment with cursor keys in normal mode,
5088 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
5091 xterm+app|fragment with cursor keys in application mode,
5092 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
5095 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
5096 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
5097 # copied the earlier scheme, as noted in the "use=" clauses in this file.
5099 # The original assignments from patch #94 for cursor-keys had some technical
5102 # A parameter for a function-key to represent a modifier is just more
5103 # bits. But for a cursor-key it may change the behavior of the
5104 # application. For instance, emacs decodes the first parameter of a
5105 # cursor-key as a repeat count.
5107 # A parameterized string should (really) not begin with SS3 (\EO).
5108 # Rather, CSI (\E[) should be used.
5110 # For these reasons, the original assignments were deprecated. For
5111 # compatibility reasons, they are still available as a setting of xterm's
5112 # modifyCursorKeys resource. These fragments list the modified cursor-keys
5113 # that might apply to xterm+pcfkeys with different values of that resource.
5115 # These entries will have warnings when checking with tic because the kri/kind
5116 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
5117 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
5118 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
5120 # * modify xterm-new terminfo entry to use capabilities for shifted
5121 # scroll forward/reverse as shifted cursor up/down.
5123 # In the 1980s when terminfo was defined, the developers made more of
5124 # a distinction between shifted up/down versus shifted left/right since most
5125 # terminals can index (scroll up/down), while few can scroll left/right.
5126 xterm+pcc3|fragment with modifyCursorKeys:3,
5127 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
5128 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
5129 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
5130 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
5131 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
5132 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
5133 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
5134 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
5137 xterm+pcc2|fragment with modifyCursorKeys:2,
5138 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
5139 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
5140 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
5141 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
5142 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
5143 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
5144 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
5146 xterm+pcc1|fragment with modifyCursorKeys:1,
5147 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
5148 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
5149 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
5150 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
5151 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
5152 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
5154 xterm+pcc0|fragment with modifyCursorKeys:0,
5155 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
5156 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
5157 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
5158 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
5159 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
5160 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
5163 # Here are corresponding fragments from xterm patch #216:
5165 xterm+pcf0|fragment with modifyFunctionKeys:0,
5166 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5167 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
5168 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
5169 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
5170 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
5171 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
5172 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
5173 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
5174 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
5175 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
5176 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5177 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
5178 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
5179 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
5180 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
5181 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
5182 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5184 xterm+pcf2|fragment with modifyFunctionKeys:2,
5185 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5186 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
5187 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
5188 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
5189 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
5190 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
5191 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
5192 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
5193 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
5194 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
5195 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
5196 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
5197 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
5198 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5199 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5200 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5201 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5202 kf8=\E[19~, kf9=\E[20~,
5204 # Chunks from xterm #230:
5205 xterm+pce2|fragment with modifyCursorKeys:2 editing-keys,
5206 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
5207 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
5208 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
5209 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
5210 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
5211 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
5212 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
5213 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
5214 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
5215 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
5216 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
5219 xterm+edit|fragment for 6-key editing-keypad,
5220 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5223 xterm+pc+edit|fragment for pc-style editing keypad,
5224 kend=\E[4~, khome=\E[1~,
5226 xterm+vt+edit|fragment for VT220-style editing keypad,
5227 kfnd=\E[1~, kslt=\E[4~,
5229 # These variations for alternate-screen and title-stacking were introduced by
5231 xterm+noalt|xterm without altscreen,
5234 xterm+alt47|X11R4 alternate-screen,
5235 rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h,
5237 xterm+alt1049|xterm 90 feature,
5238 rmcup=\E[?1049l, smcup=\E[?1049h,
5240 xterm+titlestack|xterm 251 feature,
5241 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
5243 xterm+alt+title|xterm 90 and 251 features combined,
5244 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
5246 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
5248 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
5249 # problem that the keypad layout is different, and that the natural choice for
5250 # PF1 is NumLock (which happens to be reserved for other use). To work around
5251 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
5252 # directly related to VT100.
5254 # With the VT220 keypad block that uses the 1-9 keys as suggested in
5255 # terminfo(5), the other keys can be handled with user-defined capabilities:
5257 # _______________________________________
5258 # | NumLock | / | * | - |
5259 # | | $Oo | $Oj | $OS |
5260 # |_________|__kpDIV__|__kpMUL__|__kpSUB__|
5262 # | $Ow | $Ox | $Oy | $Ok |
5263 # |_ka1__K1_|_________|_ka3__K3_| kpADD |
5265 # | $Ot | $Ou | $Ov | |
5266 # |_________|_kb2__K2_|_________|_________|
5268 # | $Oq | $Or | $Os | |
5269 # |_kc1__K4_|_________|_kc3__K5_| enter |
5272 # |_______kpZRO_______|__kpDOT__|_kent_@8_|
5274 # ka2, kb1, kb3 and kc2 are extensions, as are the mixed-case names.
5275 # There are no termcap equivalents for these extensions.
5277 # kpCMA (comma) is used here for the VT100 keypad, which xterm emulates with
5278 # shifted-keypad-plus, though normally that invokes a font-size change.
5280 # Old versions of xterm, e.g., xterm-xfree86, documented \EOE as kb2, which
5281 # does not fit into this layout. The extension kp5 fits, but is not visible
5282 # to termcap applications. As an alternative, kbeg (which does have a termcap
5283 # equivalent) is provided.
5285 xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
5286 kbeg=\EOE, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo,
5287 kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp,
5290 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
5291 # Alternatively, the same scheme with old-style function keys as in xterm-r6
5292 # is shown here (because that is used in mrxvt and mlterm):
5293 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
5294 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
5295 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
5296 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
5297 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
5298 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
5299 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
5300 kf63=\E[13;4~, use=xterm+pcf2,
5302 xterm+acs|ISO-2022 alternate character-switching for xterm,
5303 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5304 enacs@, rmacs=\E(B, smacs=\E(0,
5306 # This chunk is used for building the VT220/Sun/PC keyboard variants.
5307 xterm-basic|modern xterm terminal emulator - common,
5308 OTbs, am, bce, mir, msgr, xenl, AX, XT,
5309 colors#8, cols#80, it#8, lines#24, pairs#64,
5310 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5311 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
5312 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5313 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5314 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5315 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5316 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5317 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5318 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5319 ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
5320 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
5321 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
5322 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5323 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
5325 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5327 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5329 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
5330 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5331 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
5332 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5333 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
5334 use=xterm+alt+title, use=ansi+enq, use=att610+cvis,
5337 xterm+meta|meta mode for xterm,
5339 rmm=\E[?1034l, smm=\E[?1034h,
5341 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
5342 # In retrospect, something like xterm-r6 was intended here -TD
5343 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
5344 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
5348 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
5351 # If configured to support 88- or 256-colors (which is fairly common in 2009),
5352 # xterm also recognizes the control sequences for initc -TD
5353 xterm-16color|xterm with 16 colors like aixterm,
5355 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5356 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5357 use=xterm+osc104, use=ibm+16color, use=xterm-new,
5359 # 256-colors is a compile-time feature of XFree86 xterm beginning with
5360 # xterm patch #111 (1999/7/10) -TD
5361 xterm+256color|original xterm 256-color feature,
5363 colors#0x100, pairs#0x10000,
5364 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
5365 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
5367 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5369 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5373 # The semicolon separator used in xterm+256color does not follow the ECMA-48
5374 # standard. Since patch #282 (in 2012), xterm has supported both the legacy
5375 # subparameter separator (semicolon) and the standard (colon).
5377 # The xterm FAQ gives some of the history:
5378 # https://invisible-island.net/xterm/xterm.faq.html#color_by_number
5379 xterm+256color2|xterm 256-color feature,
5380 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48:
5382 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38:5
5386 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color
5387 # has the drawback that some of the xterm-alikes which use that building block
5388 # require a different approach to rs1 -TD
5389 xterm+osc104|reset color palette,
5390 oc=\E]104\007, rs1=\Ec\E]104\007,
5392 # palette is hardcoded...
5393 xterm+256setaf|xterm 256-color (set-only),
5395 colors#0x100, pairs#0x10000,
5396 initc@, op=\E[39;49m,
5397 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5399 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
5403 # 88-colors is a compile-time feature of XFree86 xterm beginning with
5404 # xterm patch #115 (1999/9/18) -TD
5406 # Note that the escape sequences used are the same as for 256-colors - xterm
5407 # has a different table of default color resource values. If built for
5408 # 256-colors, it can still handle an 88-color palette by using the initc
5411 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
5412 # which support the xterm+256color feature support the associated initc
5413 # capability. So it is cancelled in the entries which use this and/or the
5414 # xterm+256color block.
5416 # The default color palette for the 256- and 88-colors are different. A
5417 # given executable will have one palette (perhaps compiled-in). If the program
5418 # supports xterm's control sequence, it can be programmed using initc.
5419 xterm+88color|original xterm 88-color feature,
5420 colors#88, pairs#7744, use=xterm+256color,
5422 xterm+88color2|xterm 88-color feature,
5423 colors#88, pairs#7744, use=xterm+256color2,
5425 # These variants of XFree86 3.9.16 xterm are built as a configure option.
5426 xterm-256color|xterm with 256 colors,
5427 use=xterm+osc104, use=xterm+256color, use=xterm-new,
5428 xterm-88color|xterm with 88 colors,
5429 use=xterm+osc104, use=xterm+88color,
5432 # Emacs 26.1 and later support direct color mode in terminals, using a
5433 # combination of user-defined capabilities and ncurses-dependent function
5434 # calls. We will not include that here.
5436 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
5437 # is of interest only to the numerically illiterate), is compatible with other
5438 # terminal descriptions written for curses. It relies upon the extended range
5439 # for numeric capabilities provided in ncurses 6.1:
5440 xterm+direct2|xterm with direct-color indexing (old building-block),
5442 colors#0x1000000, pairs#0x10000, CO#8,
5443 initc@, op=\E[39;49m,
5444 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2:%p1%{65536}%/%d:%p1%{256}
5445 %/%{255}%&%d:%p1%{255}%&%d%;m,
5446 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2:%p1%{65536}%/%d:%p1%{256}
5447 %/%{255}%&%d:%p1%{255}%&%d%;m,
5449 xterm-direct2|xterm with direct-color indexing (old),
5450 use=xterm+direct2, use=xterm+titlestack, use=xterm,
5452 # That in turn had a problem: in the original patch submitted for KDE konsole
5453 # in 2006, the submitter and the developer alike overlooked a "color space
5454 # identifier" parameter. This version provides for that parameter:
5455 xterm+direct|xterm with direct-color indexing (building-block),
5457 colors#0x1000000, pairs#0x10000, CO#8,
5458 initc@, op=\E[39;49m,
5459 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2::%p1%{65536}%/%d:%p1
5460 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5461 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2::%p1%{65536}%/%d:%p1
5462 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m,
5464 xterm-direct|xterm with direct-color indexing,
5465 use=xterm+direct, use=xterm,
5467 # Here are corresponding flavors for terminals which could use the feature:
5468 iterm2-direct|iTerm2 with direct-color indexing,
5469 use=xterm+direct, use=iterm2,
5470 mlterm-direct|mlterm with direct-color indexing,
5471 use=xterm+direct, use=mlterm,
5473 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
5474 # that xterm's original implementation should have used colons for the
5475 # subparameter separators, but chose not to correct this in konsole. As of
5476 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
5477 xterm+indirect|xterm with direct-color indexing (old legacy building-block),
5479 colors#0x1000000, pairs#0x10000,
5480 initc@, op=\E[39;49m,
5481 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
5482 %/%{255}%&%d;%p1%{255}%&%d%;m,
5483 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
5484 %/%{255}%&%d;%p1%{255}%&%d%;m,
5486 konsole-direct|konsole with direct-color indexing,
5487 use=xterm+indirect, use=konsole,
5488 st-direct|simpleterm with direct-color indexing,
5489 use=xterm+indirect, use=st,
5490 vte-direct|VTE with direct-color indexing,
5491 use=xterm+indirect, use=vte,
5492 # reportedly in Apple's Mohave (fall 2018), but untested -TD
5493 nsterm-direct|nsterm with direct-color indexing,
5494 use=xterm+indirect, use=nsterm,
5496 # As for others (commenting at the time of release for ncurses 6.1):
5497 # + Apple's Terminal.app does not recognize either form of the direct-color
5499 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
5500 # the colors. Like vte, it is a subset of xterm, although different
5501 # omissions/reservations of modified-keys are seen in testing.
5502 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
5503 # nothing useful with the colors.
5504 # + Teraterm 4.97, like PuTTY (no good).
5505 # + terminology 0.91 recognizes xterm's original implementation, but does
5506 # nothing useful with it.
5508 # Reviewing after ncurses 6.2:
5509 # + Apple's Terminal.app is unchanged, has no support for direct color:
5510 # Catalina 10.15.5 Terminal.app 2.10 (433)
5511 # Mohave 10.14.6 - Terminal.app 2.9.5 (421.2)
5512 # + Cygwin's mintty 3.1.7 works with colon/semicolon
5513 # + PuTTY 0.73 works with semicolon
5514 # + Teraterm 4.105 works with semicolon
5515 # + terminology 1.7.0 works with colon/semicolon.
5517 # Other variants are possible, e.g., by using more of xterm's indexed color
5518 # palette, though the intrusion of indexed colors on the direct-color space
5519 # would be more noticeable.
5521 xterm+direct16|xterm with direct-color indexing (16-color building-block),
5523 setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48
5524 :2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&
5526 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%d%e38:
5527 2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d
5529 setb@, setf@, use=xterm+direct,
5531 xterm-direct16|xterm with direct-colors and 16 indexed colors,
5532 use=xterm+direct16, use=xterm,
5534 xterm+direct256|xterm with direct-color indexing (256-color building-block),
5536 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
5537 %p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1
5538 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5539 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%?
5540 %p1%{256}%<%t38;5;%p1%d%e38:2::%p1%{65536}%/%d:%p1
5541 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m,
5542 setb@, setf@, use=xterm+direct,
5544 xterm-direct256|xterm with direct-colors and 256 indexed colors,
5545 use=xterm+direct256, use=xterm,
5549 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
5550 # asked for some of xterm's advanced features to be added to its terminfo
5551 # entry. It defines extended capabilities not found in standard terminfo or
5552 # termcap. These are useful in tmux, for instance, hence the name.
5554 # One caveat in adding extended capabilities in ncurses is that if the names
5555 # are longer than two characters, then they will not be visible through the
5556 # termcap interface.
5558 # Ms modifies the selection/clipboard. Its parameters are
5559 # p1 = the storage unit (clipboard, selection or cut buffer)
5560 # p2 = the base64-encoded clipboard content.
5562 # Ss is used to set the cursor style as described by the DECSCUSR
5563 # function to a block or underline.
5564 # Se resets the cursor style to the terminal power-on default.
5566 # Cs and Cr set and reset the cursor colour.
5567 xterm+tmux|advanced xterm features used in tmux (cursor style 2),
5568 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
5569 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
5570 xterm+tmux2|advanced xterm features used in tmux,
5571 Cr=\E]112\E\\, Cs=\E]12;%p1%s\E\\,
5572 Ms=\E]52;%p1%s;%p2%s\E\\, Se=\E[ q, Ss=\E[%p1%d q,
5574 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
5575 # This is an 8-bit version of xterm, which emulates DEC VT220 with ANSI color.
5576 # To use it, your decTerminalID resource must be set to 200 or above.
5583 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
5584 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
5585 colors#8, cols#80, it#8, lines#24, pairs#64,
5586 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5587 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
5588 civis=\233?25l, clear=\233H\2332J,
5589 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
5590 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
5591 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
5592 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
5593 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
5594 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
5595 flash=\233?5h$<100/>\233?5l, home=\233H,
5596 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
5597 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
5598 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5600 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
5601 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
5602 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
5603 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
5604 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
5605 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
5606 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
5607 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
5608 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
5609 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
5610 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
5611 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
5612 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
5614 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
5616 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
5617 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5618 %{6}%=%t3%e%p1%d%;m,
5619 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
5620 %{6}%=%t3%e%p1%d%;m,
5621 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5622 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
5623 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
5624 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
5625 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
5626 u8=\233[?%[;0123456789]c, vpa=\233%i%p1%dd,
5627 use=ansi+enq, use=xterm+kbs,
5629 # Note: normally xterm supports modified function-keys as described in
5630 # XTerm - "Other" modified keys
5631 # https://invisible-island.net/xterm/modified-keys.html
5633 # However, xterm-hp, xterm-sco and xterm-sun assume no modifiers. Here is
5634 # a simple script which demonstrates these descriptions:
5636 # export TERM=xterm-$1
5642 # -xrm '*modifyCursorKeys:-1' \
5643 # -xrm '*modifyFunctionKeys:-1' \
5645 # e.g., "foo sun" if the script is named "foo" -TD
5646 xterm-hp|xterm with hpterm function keys,
5647 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5648 kdch1=\EP, kend=\EF, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET,
5649 use=hp+pfk-cr, use=xterm+nofkeys, use=xterm+nopcfkeys,
5651 xterm-sco|xterm with SCO function keys,
5652 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5653 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
5654 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
5655 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
5656 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
5657 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
5658 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
5659 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
5660 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
5661 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
5662 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
5663 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
5666 # The xterm-new description has all of the features, but is not completely
5667 # compatible with VT220. If you are using a Sun or PC keyboard, set the
5668 # sunKeyboard resource to true:
5669 # + maps the editing keypad
5670 # + interprets control-function-key as a second array of keys, so a
5671 # 12-fkey keyboard can support VT220's 20-fkeys.
5672 # + maps numeric keypad "+" to ",".
5673 # + uses DEC-style control sequences for the application keypad.
5675 xterm-vt220|xterm emulating VT220,
5677 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5678 kend=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
5679 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5680 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5681 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5682 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5683 kmous=\E[M, knp=\E[6~, kpp=\E[5~, nel=\EE, use=xterm+app,
5684 use=xterm+edit, use=vt220+keypad, use=ecma+italics,
5685 use=ecma+index, use=ansi+rep, use=ecma+strikeout,
5686 use=xterm+sm+1006, use=xterm+tmux, use=xterm+keypad,
5689 xterm-vt52|xterm emulating DEC VT52,
5690 cols#80, it#8, lines#24,
5691 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5692 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
5693 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
5694 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5695 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
5696 use=xterm+kbs, use=vt52+keypad,
5698 xterm-noapp|xterm with cursor keys in normal mode,
5699 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
5702 xterm-24|vs100|xterms|xterm terminal emulator 24-line (X Window System),
5703 lines#24, use=xterm-old,
5705 # This is xterm for ncurses.
5706 xterm|xterm terminal emulator (X Window System),
5709 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
5710 # setting the vt100Graphics resource to false.
5711 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5714 # These building-blocks allow access to the X titlebar and icon name as a
5715 # status line. There are a few problems in using them in entries:
5717 # a) tsl should have a parameter to denote the column on which to transfer to
5719 # b) the "0" code for xterm updates both icon-title and window title. Some
5720 # window managers such as twm (and possibly window managers descended from
5721 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
5722 # don't want to mess with icon-name when using those window managers.
5723 # c) fsl ends the escape sequence begun by tsl. Printable characters between
5724 # those (probably) will appear in the window title. Nonprintable characters
5725 # may cause the escape sequence to end with an error.
5726 # d) the BEL (^G or \007) used in the original title-as-statusline came from
5727 # David J. MacKenzie's "pseudo-color" entry in 20 Apr 1995. At that time
5728 # xterm used BEL as the string-terminator rather than ST (\E\\). Either
5729 # BEL or ST has worked since xterm patch #28 in 1996, but most uses of
5730 # this feature have been embedded in shell scripts.
5732 # But that issue regarding the parameter for tsl means that applications may
5733 # not rely on it. The SVr4 documentation says tsl will "move to status line,
5734 # column #1". At the point in time when ESR added DJM's "pseudo-color" entry
5735 # with the split-up escape sequence for tsl/fsl, there were 65 entries using
5737 # 32 used a parameter, matching the documentation (including x10term).
5738 # 21 used a parameterless control, exiting from the status line on ^M.
5739 # 6 used parameterless controls for tsl and fsl
5740 # 6 used a split-up escape sequence, e.g., the same approach.
5742 # The extension "TS" is preferable, because it does not accept a parameter.
5743 # However, if you are using a non-extended terminfo, "TS" is not visible.
5744 xterm+sl|access X title line and icon name,
5746 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
5747 xterm+sl-twm|access X title line (pacify twm-descended window managers),
5749 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
5750 xterm+sl-alt|alternate access X title line,
5752 dsl=\E]2;\E\\, fsl=\E\\, tsl=\E]2;, TS=\E]2;,
5754 # In contrast, this block can be used for a DEC VT320 and up. There are two
5757 # DECSASD (select active status display)
5758 # \E[0$} Main display
5759 # \E[1$} Status line
5761 # DECSSDT (select status line type)
5762 # \E[0$~ No status line
5763 # \E[1$~ Indicator status line
5764 # \E[2$~ Host-writable status line
5766 # The building block assumes that the terminal always shows something at the
5767 # status line (either the indicator, or status line). That is because if no
5768 # status line is used, then the terminal makes that line part of the user
5769 # window, changing its size without notice.
5771 # Because there is no "esl" (enable status line) capability, the "tsl"
5772 # capability ensures that the status line is host-writable. A DEC terminal
5773 # will clear the status line when changing from indicator to host-writable
5776 # Once on the status line, the row part of cursor addressing is ignored. Since
5777 # tsl expects a parameter (to specify the column), the shortest addressing that
5778 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
5780 dec+sl|DEC VTxx status line,
5782 dsl=\E[0$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
5785 # The following xterm variants don't depend on your base version
5787 # xterm with bold instead of underline
5788 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
5789 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
5791 smso=\E[7m, smul=\E[1m, use=xterm-old,
5793 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
5794 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
5795 ich@, ich1@, use=xterm,
5796 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
5797 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
5798 rmcup@, smcup@, use=xterm,
5800 # https://invisible-island.net/xterm/xterm-paste64.html
5802 # Bracketed paste was introduced by xterm patch #203 in May 2005, as part of a
5803 # larger feature for manipulating the clipboard selection. Few terminals aside
5804 # from xterm fully implement the clipboard feature, but several copy this
5805 # detail. The names for the extended capabilities here were introduced by vim
5806 # in January 2017, but used internally. In 2023, vim patch 9.0.1117 is needed
5807 # to work with this change.
5808 bracketed+paste|xterm bracketed paste,
5809 BD=\E[?2004l, BE=\E[?2004h, PE=\E[201~, PS=\E[200~,
5811 # https://invisible-island.net/xterm/xterm.log.html#xterm_354
5813 # The response is a DSR sequence identifying the version: DCS > | text ST
5815 # ^[P>|XTerm(354)^[\
5816 report+version|Report xterm name and version (XTVERSION),
5817 XR=\E[>0q, xr=\EP>\\|[ -~]+\E\\\\, use=report+da2,
5819 # Vim uses RV to denote the secondary device attributes. Xterm documents the
5820 # - first parameter as the terminal type (extending it to VT100),
5821 # - the second as the patch number for xterm, and
5822 # - the third parameter as zero.
5823 # Other terminals may provide useful responses, though few are documented.
5824 report+da2|report secondary device attributes (DA2),
5825 RV=\E[>c, rv=\E\\[[0-9]+;[0-9]+;[0-9]+c,
5828 # The xterm mouse protocol is used by other terminal emulators.
5829 # In this section, two extended capabilities are used to illustrate the mouse
5830 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
5831 # enabling/disabling other mouse protocols. The "xm" capability describes the
5832 # mouse response; currently there is no interpreter which would use this
5833 # information to make the mouse support completely data-driven.
5835 # Here is the "original" xterm mouse protocol.
5837 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
5838 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
5839 # sequence", referring to the fact that it does not correspond to a "real"
5840 # terminal. The mouse responses for the X10 protocol are sent only for
5842 xterm+x10mouse|X10 xterm mouse protocol,
5843 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
5844 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
5845 xterm-x10mouse|X10 xterm mouse,
5846 use=xterm+x10mouse, use=xterm,
5848 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
5851 # The mouse responses for the X11 protocol covered button releases, as well as
5854 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
5857 # The modifiers are not reflected in this description because as used in xterm
5858 # they are normally inaccessible because the translations resources assign
5859 # shift and control to other features. However, they are important because
5860 # they take up space in the first byte of the response. The other bits of this
5861 # byte are used to encode the button number for both presses and releases.
5862 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
5863 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
5864 # provide additional features, e.g., wheel mouse.
5866 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
5867 # "t" or "T", which was activated by double-clicking. The "t" response was
5868 # used when the starting/ending positions were the same.
5870 # X11R3 (February 1988) added the highlight/tracking mode.
5872 # X11R4 (December 1989) added the control sequences document, listing the
5873 # control sequences for the X10/X11 protocols without descriptions. It also
5874 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
5875 # X11 protocol as "DEC VT200 compatible", although DEC offered no such terminal.
5877 # X11R5 (November 1993) gave a description of the mouse protocol.
5879 # X11R6 (January 1995) moved the control sequences document out of the xterm
5880 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
5881 # no new information.
5882 xterm+x11mouse|X11 xterm mouse protocol,
5883 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
5884 xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c,
5885 xterm-x11mouse|X11 mouse,
5886 use=xterm+x11mouse, use=xterm,
5888 # Here is a suggested description of the xterm highlighting protocol.
5889 # A more complicated example could be constructed to account for the "t"
5891 xterm+x11hilite|X11 xterm mouse protocol with highlight,
5892 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
5893 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
5895 xterm-x11hilite|X11 mouse with highlight,
5896 use=xterm+x11mouse, use=xterm,
5898 # The preceding were the sources from X Consortium. Other sources (or patches)
5899 # were available. Starting in mid-1995, XFree86 developers collected some of
5900 # those changes and began improvements, e.g., to support color. This was, by
5901 # the way, around the same time that rxvt developers began implementing color,
5902 # though dates (and attributions) are not well documented. I became interested
5903 # in xterm in late 1995, and involved in early 1996. To complete the picture,
5904 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
5906 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
5907 # "any-event" mouse mode.
5909 # These building blocks incorporate later features as well:
5910 # xterm patch #224 (2007/2/11) added private mode 1004, for enabling/disabling
5911 # focus in/out event reporting.
5912 # xterm patch #277 (2012/01/07) added private mode 1006
5914 xterm+sm+1002|xterm any-button mouse,
5915 kmous=\E[<, XM=\E[?1006;1004;1002%?%p1%{1}%=%th%el%;,
5916 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5918 xterm-1002|example of xterm any-button mouse,
5919 use=xterm+sm+1002, use=xterm,
5921 xterm+sm+1003|xterm any-event mouse,
5922 XM=\E[?1006;1004;1003%?%p1%{1}%=%th%el%;,
5924 xterm-1003|example of xterm any-event mouse,
5925 use=xterm+sm+1003, use=xterm,
5927 xterm+focus|xterm focus-in/out event "keys",
5929 kxIN=\E[I, kxOUT=\E[O,
5931 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5934 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5935 # dropping support for the X11 mouse protocol's shift-modifier and using
5936 # available bits in the first byte of the response to encode buttons 4 and 5.
5937 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5938 # older configurations which might have used the obsolete modifiers.
5940 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5941 # where the coordinates in the mouse response would be encoded in UTF-8,
5942 # thereby extending the range of coordinates past 222=(255-33). This is the
5943 # "1005" mouse mode.
5944 xterm+sm+1005|xterm UTF-8 mouse (building block),
5945 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5946 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5947 xterm-1005|xterm UTF-8 mouse,
5948 use=xterm+sm+1005, use=xterm,
5950 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5951 # SGR-style parameters.
5953 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5954 # (By the way, this is a problem with the X11 protocol). A more plausible
5955 # criticism is that the responses provided by the 1005 mode are not distinct
5956 # from the non-1005 responses.
5958 # As an alternative (and fixing the longstanding limitation of X11 mouse
5959 # protocol regarding button-releases), I provided the 1006 mode, referring
5960 # to it as "SGR 1006" since the replies resemble the SGR control string:
5961 xterm+sm+1006|xterm SGR-mouse (building block),
5962 kmous=\E[<, XM=\E[?1006;1004;1000%?%p1%{1}%=%th%el%;,
5963 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
5964 xterm-1006|xterm SGR-mouse,
5965 use=xterm+sm+1006, use=xterm,
5968 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5969 # (kterm should not invoke DEC Graphics as the alternate character set
5970 # -- Kenji Rikitake)
5971 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5972 # -- MATSUMOTO Shoji)
5973 # kterm implements acsc via built-in table of X Drawable's
5974 kterm|kterm kanji terminal emulator (X window system),
5977 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5978 csr=\E[%i%p1%d;%p2%dr, enacs=, kmous=\E[M, rc=\E8,
5979 rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5980 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5982 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, use=x10term+sl,
5983 use=xterm-r6, use=ecma+color,
5984 kterm-color|kterm-co|kterm with ANSI colors,
5985 ncv@, use=kterm, use=ecma+color,
5989 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5990 # variant of xterm which is apparently no longer supported, but are interesting
5991 # because they illustrate SVr4 curses mouse controls - T.Dickey
5992 xtermm|xterm terminal emulator (monochrome),
5993 OTbs, am, km, mir, msgr, xenl,
5994 btns#3, cols#80, it#8, lines#24,
5995 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5996 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5997 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5998 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5999 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6000 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6001 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
6002 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
6003 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
6004 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
6005 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
6006 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
6007 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
6008 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
6009 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6010 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6011 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6012 %;m%?%p9%t\016%e\017%;,
6013 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
6014 smso=\E[7m, tbc=\E[3g, use=decid+cpr, use=vt100+fnkeys,
6016 xtermc|xterm terminal emulator (color),
6017 colors#8, ncv#7, pairs#64,
6018 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6019 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6021 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6025 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
6026 # Here's a termcap entry I've been using for xterm_color, which comes
6027 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
6028 # color stuff, I also have a status line defined as the window manager
6029 # title bar. [I have translated it to terminfo -- ESR]
6030 xterm-pcolor|xterm with color used for highlights and status line,
6032 bold=\E[1;43m, rev=\E[7;34m,
6033 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
6034 %t;7;31%;%?%p3%t;7;34%;m,
6035 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
6037 # This describes the capabilities of color_xterm, an xterm variant from
6038 # before ECMA-48 color support was folded into the main-line xterm release.
6039 # This entry is straight from color_xterm's maintainer.
6040 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
6041 # The README's with the distribution also say that it supports SGR 21, 24, 25
6042 # and 27, but they are not present in the terminfo or termcap.
6043 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
6044 OTbs, am, km, mir, msgr, xenl, XT,
6045 cols#80, it#8, lines#65, ncv@,
6046 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6047 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6048 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6049 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6050 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6051 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6052 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
6053 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6054 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
6055 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
6056 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
6057 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
6058 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
6059 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
6060 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
6061 rmso=\E[27m, rmul=\E[24m,
6062 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
6064 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6065 %;m%?%p9%t\016%e\017%;,
6066 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
6067 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
6068 smul=\E[4m, use=decid+cpr, use=ecma+color,
6071 # The IRAF source has a terminfo using "xterm-r5", but line-drawing does not
6072 # work in that case. This entry uses xterm+acs, to work around that problem.
6074 # Home/end keys do not work, due to a bug in the X Consortium xterm on which
6077 # https://invisible-island.net/xterm/xterm.faq.html#bug_xterm_r6
6079 # Comparing to the X11R5 source, xgterm has dynamic and ANSI colors (probably
6080 # not bce). It interchanges mouse buttons 2/3 for menus.
6082 # It also has a few features found in later versions of xterm:
6083 # - vi-button and dired-button,
6084 # - i18n stuff like X11R6.
6085 # - colorBD, colorUL
6088 # Debian provides a package for xgterm (and iraf). Although the source for
6089 # xgterm implements the control-sequences for ANSI color, the packaged xgterm
6090 # does nothing with those, even after installing the app-defaults file which
6091 # was overlooked by the Debian packager.
6092 xgterm|graphic terminal for IRAF,
6093 use=xterm+acs, use=xterm-r5, use=xterm+keypad,
6095 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
6096 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
6097 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
6098 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
6099 # that each of those implements the home, end, delete keys differently.
6101 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
6102 # colors; note that this is not compatible with the 5.2 version.
6103 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
6104 # match XFree86's xterm.terminfo usage and prevent circular links
6105 xterm-color|nxterm|generic color xterm,
6107 op=\E[m, use=xterm-r6, use=klone+color,
6109 # This entry describes an xterm with Sun-style function keys enabled
6110 # via the X resource setting "xterm*sunFunctionKeys:true"
6111 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
6112 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
6113 # because we want it to be seen as <kcpy>.
6114 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
6115 # with their Sun keyboard labels instead.
6116 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
6117 xterm-sun|xterm with sunFunctionKeys true,
6118 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
6119 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
6120 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
6121 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
6122 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
6123 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
6124 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
6125 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
6126 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
6127 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
6128 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
6129 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
6130 use=xterm+nofkeys, use=xterm+nopcfkeys,
6131 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
6132 cols#80, lines#24, use=xterm-sun,
6135 # this describes the alpha-version of GNOME terminal shipped with Redhat 6.0
6136 gnome-rh62|GNOME terminal,
6138 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6139 use=linux+kbs, use=xterm-color,
6141 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
6143 # This implements a subset of VT102 with a random selection of features from
6144 # other terminals such as color and function-keys.
6146 # shift-f1 to shift-f10 are f11 to f20
6148 # NumLock changes the application keypad to approximate VT100 keypad, except
6149 # that there is no escape sequence matching comma (,).
6151 # Other defects observed:
6152 # vt100 LNM mode is not implemented.
6153 # vt100 80/132 column mode is not implemented.
6154 # vt100 DECALN is not implemented.
6155 # vt100 DECSCNM mode is not implemented, so flash does not work.
6156 # vt100 TBC (tab reset) is not implemented.
6157 # xterm alternate screen controls do not restore cursor position properly
6158 # it hangs in tack after running function-keys test.
6159 gnome-rh72|GNOME Terminal in RedHat 7,
6161 kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6163 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
6165 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis,
6166 use=linux+kbs, use=xterm-color,
6168 # GNOME Terminal 2.0.1 (Redhat 8.0)
6170 # Documentation now claims it implements VT220 (which is demonstrably false).
6171 # However, it does implement ECH, which is a VT220 feature. And there are
6172 # workable VT100 LNM, DECALN, DECSNM modes, making it possible to display
6173 # more of its bugs using vttest.
6175 # However, note that bce and msgr are broken in this release. Tabs (tbc and
6176 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
6178 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
6179 # operations. Shift-tab generates a distinct sequence so it can be argued
6180 # that it implements kcbt.
6181 gnome-rh80|GNOME Terminal in RedHat 8,
6183 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
6184 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
6186 # GNOME Terminal 2.2.1 (Redhat 9.0)
6188 # bce and msgr are repaired.
6189 gnome-rh90|GNOME Terminal in RedHat 9,
6191 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
6192 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
6193 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
6196 # GNOME Terminal 2.14.2 (Fedora Core 5)
6197 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
6198 gnome-fc5|GNOME Terminal in Fedora Core 5,
6200 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
6202 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
6204 # GNOME Terminal 2.18.1 (2007 snapshot)
6206 # For any "recent" version of gnome-terminal, it is futile to attempt to
6207 # support modifiers on cursor- and keypad keys because the program usually
6208 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
6209 # of the keys (which more/less correspond to the termcap values), and will
6210 # interpret those according to the $TERM value, but others not in the
6211 # terminfo according to some constantly changing set of hacker guidelines -TD
6212 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
6213 use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5,
6214 gnome-2007|GNOME Terminal snapshot 2.18.1,
6217 # GNOME Terminal 2.22.3 (2008 snapshot)
6219 # In vttest, it claims to be a VT220 with national replacement character-sets,
6220 # but aside from the identifier string, implements only a small fraction of
6221 # VT220's behavior, which will make it less usable on a VMS system (unclear
6222 # what the intent of the developer is, since the NRC feature exposed in vttest
6223 # by this change does not work).
6224 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
6225 use=vte+pcfkeys, use=vte-2007,
6226 gnome-2008|GNOME Terminal snapshot 2.22.3,
6229 # GNOME Terminal 3.6.0 (2012)
6230 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
6231 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
6234 # Testing with tack shows that flash does not/has not worked -TD
6235 vte-2012|VTE 0.34.1,
6237 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
6238 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
6239 %|%t;7%;m%?%p9%t\016%e\017%;,
6240 use=ecma+italics, use=vte-2008,
6241 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
6242 # 61 differences from a correct entry for gnome terminal.
6243 gnome-2012|GNOME Terminal 3.6.0,
6246 # Before 2008, GNOME terminal could automatically use the contents of the
6247 # "xterm" terminfo to supply key information which is not built into the
6248 # program. With 2.22.3, this list was built into the program (which addressed
6249 # the inadvertent use of random terminfo data, though using a set of values
6250 # which did not correspond to any that xterm produced - still not solving the
6251 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
6253 # terminfo modifier code keys
6254 # kf13-kf24 shift 2 F1 to F12
6255 # kf25-kf36 control 5 F1 to F12
6256 # kf37-kf48 shift/control 6 F1 to F12
6257 # kf49-kf60 alt 3 F1 to F12
6258 # kf61-kf63 shift-alt 4 F1 to F3
6260 # The parameters with \EO (SS3) are technically an error, since SS3 should have
6261 # no parameters. This appears to be rote copying based on xterm+pcc0.
6262 vte+pcfkeys|VTE's variation on xterm+pcfkeys (building block),
6263 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
6264 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
6265 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
6266 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
6267 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
6268 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
6270 gnome+pcfkeys|GHOME Terminal's variation on xterm+pcfkeys (building block),
6273 # deprecated - use "vte" for newer versions
6274 gnome|GNOME Terminal,
6276 gnome-256color|GNOME Terminal with xterm 256-colors,
6277 use=xterm+256color, use=gnome,
6279 # relevant changes were made in January 2014, and later.
6281 # Originally VTE was promoted as a library able to emulate any terminal by
6282 # reading its terminal description. In practice, that never got beyond the
6283 # ability to read definitions of special keys (function-, editing-, cursor).
6285 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
6286 # of a termcap file derived from xterm). That was incomplete because it did
6287 # not have any of the modifier-key information used for xterm's function-,
6288 # editing-, and cursor-keys. Having its own reader was unnecessary since
6289 # ncurses provides that information; used since xterm patch #225 in 2007.
6291 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
6292 # gnome #730137) dealt with attempts to recast that termcap reader as library
6293 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
6294 # abandoning that and finally constructing a table to match xterm's default
6295 # behavior, e.g., for "xterm+pcfkeys".
6296 vte-2014|VTE 0.35.1,
6298 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
6299 ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
6300 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
6301 use=bracketed+paste,
6303 # As of January 2018, this was the most recent release,
6304 # e.g., with gnome-terminal 3.26.2
6305 vte-2017|VTE 0.50.2,
6306 use=ecma+strikeout, use=vte-2014,
6308 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
6309 # late in 2017 for changing the appearance of underlines, which was
6310 # incorporated into Debian and Fedora testing-packages in February and March
6311 # 2018, respectively. Overline (Smol/Rmol) has been supported since December
6313 vte-2018|VTE 0.51.2,
6315 blink=\E[5m, enacs=\E(B\E)0, nel=\EE,
6316 rep=%p1%c\E[%p2%{1}%-%db,
6317 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;
6318 8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
6319 Rmol=\E[55m, Se=\E[1 q, Smol=\E[53m, Smulx=\E[4:%p1%dm,
6320 use=xterm+alt+title, use=xterm+tmux, use=kitty+setal,
6323 # Summarizing as of March 2022, these terminfo-capabilities of xterm are
6325 # - DEC application keypad mode
6326 # - DEC-compatible status-line
6327 # - DEC left/right margin support
6328 # - DEC printer controls
6329 # - AT&T cursor-blinking
6330 # - meta mode, as documented in terminfo(5)
6331 # - xterm's extension to clear scrollback
6332 vte|VTE aka GNOME Terminal,
6335 vte-256color|VTE with xterm 256-colors,
6336 use=xterm+256color, use=vte,
6338 # XFCE Terminal 0.2.5.4beta2
6340 # This is based on some of the same source code, e.g., the VTE library, as
6341 # gnome-terminal, but has fewer features, fails more screens in vttest.
6342 # Since most of the terminfo-related behavior is due to the VTE library,
6343 # the terminfo is the same as gnome-terminal.
6351 # A terminal written in JavaScript, which can provide xterm-like terminal
6352 # emulation in a browser such as Google Chrome, or in Chome OS.
6354 # https://chromium.googlesource.com/apps/libapps/+/master/nassh/doc/FAQ.md
6356 # Tested with Secure Shell App version 0.39 in Chrome 89.0.4389.90, found that
6357 # the numeric keypad escapes are missing -TD
6358 hterm|Chromium hterm,
6361 kcbt=\E[Z, kent=\EOM, nel=\EE, use=linux+kbs,
6362 use=xterm+osc104, use=ecma+index, use=ansi+rep,
6363 use=ecma+strikeout, use=vt420+lrmm, use=xterm+sm+1006,
6364 use=xterm+tmux, use=ecma+italics, use=xterm+pcfkeys,
6365 use=xterm-basic, use=bracketed+paste,
6366 hterm-256color|Chromium hterm with xterm 256-colors,
6367 use=xterm+256color2, use=hterm,
6371 # https://github.com/thestinger/termite
6373 # A review requires install of Arch Linux since Fedora and Debian don't have
6374 # this program. It uses "vte3-ng" (a conflicting package), which is here:
6375 # https://github.com/thestinger/vte-ng
6376 # which (based on the default branch setting) seems to be a fork of vte
6377 # 0.48.2, and is noted as such in Arch:
6378 # https://aur.archlinux.org/packages/vte3-ng/
6379 # It won't be merged:
6380 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
6381 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
6382 # but perhaps made obsolete.
6384 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
6385 # was mostly cut/paste from xterm-256color, but since VTE does not actually
6386 # implement several of the features in that terminal description, this one is
6387 # trimmed to eliminate those. Also, since it is a slightly older version of
6388 # VTE, it lacks a few more features (again, trimmed).
6389 termite|VTE-based terminal,
6390 am, ccc, km, mir, msgr, npc, xenl,
6391 cols#80, it#8, lines#24, ncv@,
6392 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6394 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
6395 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6396 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6397 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6398 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6399 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
6400 ht=^I, hts=\EH, ind=\n, invis=\E[8m,
6401 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
6402 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6403 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
6404 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
6405 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6407 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
6408 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6409 use=xterm+alt1049, use=ecma+index, use=ansi+idc,
6410 use=ansi+idl, use=ansi+enq, use=ecma+italics,
6411 use=xterm+256color, use=ecma+color, use=vt220+cvis,
6412 use=xterm+pcfkeys, use=xterm+sl-twm,
6415 # Multi-GNOME-Terminal 1.6.2
6417 # This does not use VTE, and does have different behavior (compare xfce and
6419 mgt|Multi GNOME Terminal,
6420 use=ecma+index, use=xterm-xf86-v333,
6423 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
6424 # or not is debatable).
6427 kdch1=^?, kend=\E[F, khome=\E[H, use=linux+kbs,
6430 # Konsole 1.0.1 (2001/11/25)
6431 # (formerly known as kvt)
6433 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
6434 # simplify this entry (and point out why konsole isn't xterm), we base this on
6435 # xterm-r6. The default keyboard appears to be 'linux'.
6438 # a) konsole implements several features from XFree86 xterm, though none of
6439 # that is documented - except of course in its source code - apparently
6440 # because its implementors are unaccustomed to reading documentation - as
6441 # evidenced by the sparse and poorly edited documentation distributed with
6442 # konsole. Some features such as the 1049 private mode are recognized but
6443 # incorrectly implemented as a duplicate of the 47 private mode.
6444 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
6445 # sends PC-style escapes rather than VT100.
6446 # c) fails vttest menu 3 (Test of character sets) because it does not properly
6447 # parse some control sequences. Also fails vttest Primary Device Attributes
6448 # by sending a bogus code (in the source it says it's supposed to be a
6449 # VT220, which is doubly incorrect because it does not implement VT220
6450 # control sequences except for a few special cases). Treat it as a
6451 # mildly-broken VT102.
6453 # Update for konsole 1.3.2:
6454 # The 1049 private mode works (but see the other xterm screens in vttest).
6455 # Primary Device Attributes now returns the code for a VT100 with advanced
6456 # video option. Perhaps that's intended to be a "mildly-broken Vt102".
6458 # Updated for konsole 1.6.4:
6459 # add konsole-solaris
6461 # Updated for konsole 1.6.6:
6462 # add control-key modifiers for function-keys, etc.
6464 # Updated for konsole 2.3 (October 2008):
6465 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
6466 # different from xterm (and VT100's). They have the same behavior in
6467 # this detail, but it is unclear which copies the other.
6469 # Deferred update for konsole 2.10 (late 2012):
6470 # add SGR 1006 mouse
6472 # Updated for konsole 2.12.4 (late 2013):
6475 # Updated for konsole 16.07 (mid 2016):
6476 # add dim, invis, strikeout
6477 # (also overline, which is too rarely used to provide as an extension)
6479 # Updated for konsole 17.12.0 (late 2017):
6481 # Re-enable "bel", since it is latent in the source-code even though KDE config
6482 # often hides the feature (2020/5/30)
6483 konsole-base|KDE console window (common),
6486 blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX,
6487 flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG,
6488 invis=\E[8m, kbs=^?, kdch1=\E[3~, kend=\E[4~, kf1@, kf10@,
6489 kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@,
6490 kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~,
6491 kslt@, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6492 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
6493 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6494 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6495 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
6496 use=ecma+index, use=xterm+sm+1006, use=ecma+strikeout,
6497 use=ecma+italics, use=ecma+color, use=xterm-r6,
6498 use=vt220+cvis, use=bracketed+paste,
6501 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
6502 # "vt100" key-table files along with a compiled-in default key-table.
6504 # The main difference between the two keytabs was that the developer equated
6505 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
6506 # that. For the same reason, the home/end keys differ. A VT100 had none of
6507 # that. The otherwise identical keytabs have definitions to model the VT52
6508 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
6510 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
6511 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
6512 # dropped from the install in June 2008.
6514 # The default keytab added in January 2000 was originally titled "X11 R6",
6515 # and likewise retitled to "XFree 4".
6517 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
6518 # and changing backspace to ^H, removing that keytab's attempt to model the
6519 # VT100 keypad and VT52 (KDE #20459).
6521 # The developers made changes to the default and linux keytabs. Comparing
6522 # the original and 2018 versions using diffstat:
6523 # default: 119 added, 147 deleted, 28 unchanged
6524 # linux: 47 added, 28 deleted, 104 unchanged
6526 # Most of the change for the default keytab was to make konsole act more like
6527 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
6528 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
6529 # made an external file (like "linux" and "solaris"), and some further
6530 # refinement made. But there are still flaws in the scheme.
6532 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
6533 # Shift into a placeholder in the table entries. That works well if all of the
6534 # modified keys are modified in the same way. But xterm does not do that. The
6535 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
6536 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
6537 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
6538 # kf14: '\E[1;2Q', '\EO2Q'.
6540 # In effect, a quarter of konsole's function-keys are different from xterm.
6542 # It is not a simple blunder:
6543 # a) xterm patch #121 (November 1999), providing the first version of the
6544 # PC-style modifiers would send \EO2Q
6545 # b) xterm patch #216 (July 2006) amended this and other details, provided
6546 # better documentation for the modifiers and made the behavior configurable,
6547 # e.g., using the modifyFunctionKeys resource. The reason why it sends
6548 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
6549 # changelog points this out as "avoid sending SS3 with parameters".
6550 # c) That came after AnyMod was introduced, but still early enough that one
6551 # might expect konsole's developers to followup. Twelve years later that
6552 # has yet to happen.
6554 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
6556 konsole-linux|KDE console window with Linux keyboard,
6557 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
6558 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
6559 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6560 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
6561 konsole-solaris|KDE console window with Solaris keyboard,
6562 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6564 # Obsolete: x11r5.keymap
6565 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
6566 # terminfo at the time rather than testing the code.
6567 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
6568 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
6570 # The value for kbs (see konsole-vt100) reflects local customization rather
6571 # than the settings used for XFree86 xterm.
6572 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
6573 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
6576 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
6577 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
6580 # Obsolete: vt100.keymap
6581 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
6582 # it is still useful for deriving the other entries, since the developer
6583 # provided function-keys based on xterm.
6584 konsole-vt100|KDE console window with VT100 (sic) keyboard,
6585 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
6586 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
6587 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
6588 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6589 khome=\E[H, use=konsole-base,
6591 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
6592 # September 2008 and removed in June 2016. The developer who removed it stated
6593 # that it was never installed.
6594 konsole-vt420pc|KDE console window with VT420 PC keyboard,
6595 kbs=^H, kdch1=^?, use=konsole-vt100,
6597 # make a default entry for konsole
6598 konsole|KDE console window,
6601 # These were written for ncurses:
6602 konsole-16color|klone of xterm-16color,
6603 ncv#32, use=ibm+16color, use=konsole,
6604 konsole-256color|KDE console window with xterm 256-colors,
6605 use=xterm+256setaf, use=konsole,
6608 # https://github.com/arakiken/mlterm
6610 mlterm|multi lingual terminal emulator,
6613 # Tested mlterm 3.9.0 (2020/09/19):
6615 # - has blinking text
6617 # - has invisible-text
6619 # - has crossed-out text
6620 # - does not support palette reset with OSC 104
6621 # - testing the function-keys is difficult because the terminal is
6622 # preconfigured to set many of the modified keys to special functions, e.g.,
6623 # - shift-F1 and shift-F2 are bound to a split-screen feature
6624 # - control-F1 and control-F2 is bound to a new-terminal feature
6626 # - primary response says it is a VT340 (ReGIS and Sixel).
6627 # - has partial support for double-size characters.
6628 # - character-set tests do not work.
6629 # - DEC locator works.
6630 # - 1006-mouse works.
6631 # - focus-events do not work reliably.
6632 # - numeric keypad escapes do not work.
6633 # - back-color erase works
6635 # - title-stack works.
6636 # - doesn't respond to 8-bit controls.
6637 # - 256-color palette initializing works.
6638 # - DECSTR soft-reset is documented.
6640 # Tested mlterm 3.3.8 (2018/01/21):
6641 # found xterm+sm+1006 did not work with version 3.3.8
6642 # soft-reset DECSTR is in sources since 2017/09/19.
6644 # Tested mlterm 3.2.2 (2014/03/22):
6645 # mlterm 3.x made further changes, but they were not reflected in the included
6646 # mlterm.ti (which was dropped in 2015). This entry has been based on testing
6647 # with ncurses, tack and vttest -TD
6648 mlterm3|multi lingual terminal emulator 3.x,
6650 blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
6651 is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
6652 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%?
6653 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
6654 use=ansi+enq, use=ansi+rep, use=ecma+italics,
6655 use=ecma+strikeout, use=xterm+app, use=xterm+pcf2,
6656 use=xterm+pcc2, use=xterm+pce2, use=xterm+meta,
6657 use=xterm+alt+title, use=xterm+sm+1006,
6658 use=vt100+pfkeys, use=bracketed+paste, use=mlterm2,
6661 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
6663 # It is nominally a VT102 emulator, with features borrowed from rxvt and
6666 # The function keys are numbered based on shift/control/alt modifiers, except
6667 # that the control-modifier itself is used to spawn a new copy of mlterm (the
6668 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
6669 # how it is configured.
6671 # kf1 to kf12 \E[11~ to \E[24~
6672 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
6673 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
6674 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
6675 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
6676 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
6677 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
6678 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
6680 mlterm2|multi lingual terminal emulator 2.x,
6681 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
6682 colors#8, cols#80, it#8, lines#24, pairs#64,
6683 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6684 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
6685 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6686 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6687 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6688 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6689 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
6690 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6691 il=\E[%p1%dL, il1=\E[L, ind=\n,
6692 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
6693 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6694 kend=\EOF, kent=\EOM, khome=\EOH, kind=\EO1;2B, kmous=\E[M,
6695 kri=\EO1;2A, mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8,
6696 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
6697 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6698 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
6699 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6700 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
6702 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
6703 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6704 u8=\E[?1;2c, vpa=\E[%i%p1%dd, use=ansi+enq,
6705 use=vt220+vtedit, use=xterm+alt1049, use=ecma+index,
6706 use=mlterm+pcfkeys, use=vt220+cvis, use=xterm+r6f2,
6708 # The insert/delete/home/end keys do not respond to modifiers because mlterm
6709 # looks in its termcap to decide which string to send. If it used terminfo
6710 # (when available), it could use the extended names introduced for xterm.
6711 mlterm+pcfkeys|mlterm fragment for PC-style fkeys,
6712 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
6713 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
6714 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
6715 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
6716 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
6717 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
6718 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
6719 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
6720 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
6722 mlterm-256color|mlterm 3.0 with xterm 256-colors,
6723 use=xterm+256color, use=mlterm,
6726 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
6727 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
6730 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
6731 # but some applications don't work with that.
6732 # It also has an AIX extension
6736 # but the latter does not work correctly.
6738 # The distributed terminfo says it implements hpa and vpa, but they are not
6739 # implemented correctly, using relative rather than absolute positioning.
6741 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
6742 # Since rxvt is not really compatible with xterm, it should be configured as
6743 # "rxvt" or "rxvt-color".
6745 # removed dch/dch1 because they are inconsistent with bce/ech -TD
6746 # remove km as per tack test -TD
6747 rxvt-basic|rxvt terminal base (X Window System),
6748 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
6749 cols#80, it#8, lines#24,
6750 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6751 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6752 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6753 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6754 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6755 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6756 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
6757 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6758 ind=\n, is1=\E[?47l\E=\E[?1l,
6759 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6760 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6761 rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
6762 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6763 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6765 s0ds=\E(B, s1ds=\E(0, sc=\E7,
6766 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6768 sgr0=\E[0m\017, smacs=^N, smir=\E[4h, smkx=\E=, smso=\E[7m,
6769 smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+enq,
6770 use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
6771 # Key Codes from rxvt reference:
6773 # Note: Shift + F1-F10 generates F11-F20
6775 # For the keypad, use Shift to temporarily override Application-Keypad
6776 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
6777 # is off, escape sequences toggle Application-Keypad setting.
6778 # Also note that values of Home, End, Delete may have been compiled
6779 # differently on your system.
6781 # Normal Shift Control Ctrl+Shift
6782 # Tab ^I ESC [ Z ^I ESC [ Z
6783 # BackSpace ^H ^? ^? ^?
6784 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
6785 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
6786 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6787 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
6788 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
6789 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
6790 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
6791 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
6792 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
6793 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
6794 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
6795 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
6796 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
6797 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
6798 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
6799 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
6800 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
6801 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
6802 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
6803 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
6804 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
6805 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
6806 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
6807 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
6808 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
6809 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
6810 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
6811 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
6812 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
6815 # Up ESC [ A ESC [ a ESC O a ESC O A
6816 # Down ESC [ B ESC [ b ESC O b ESC O B
6817 # Right ESC [ C ESC [ c ESC O c ESC O C
6818 # Left ESC [ D ESC [ d ESC O d ESC O D
6819 # KP_Enter ^M ESC O M
6820 # KP_F1 ESC O P ESC O P
6821 # KP_F2 ESC O Q ESC O Q
6822 # KP_F3 ESC O R ESC O R
6823 # KP_F4 ESC O S ESC O S
6824 # XK_KP_Multiply * ESC O j
6825 # XK_KP_Add + ESC O k
6826 # XK_KP_Separator , ESC O l
6827 # XK_KP_Subtract - ESC O m
6828 # XK_KP_Decimal . ESC O n
6829 # XK_KP_Divide / ESC O o
6841 # The source-code for rxvt actually defines mappings for F21-F35, using
6842 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
6843 # are rare, so this entry uses the shift- and control-modifiers as in
6844 # xterm+pcfkeys to define keys past F12.
6846 # kIC is normally not used, since rxvt performs a paste for that (shifted
6847 # insert), unless private mode 35 is set.
6849 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
6850 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
6851 rxvt+pcfkeys|rxvt fragment for PC-style fkeys,
6852 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6853 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
6854 kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
6855 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6856 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6857 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6858 kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^,
6859 kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^,
6860 kf29=\E[18\^, kf3=\E[13~, kf30=\E[19\^, kf31=\E[20\^,
6861 kf32=\E[21\^, kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^,
6862 kf36=\E[26\^, kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^,
6863 kf4=\E[14~, kf40=\E[32\^, kf41=\E[33\^, kf42=\E[34\^,
6864 kf43=\E[23@, kf44=\E[24@, kf5=\E[15~, kf6=\E[17~,
6865 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kind=\E[a,
6866 kri=\E[b, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
6867 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
6868 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
6869 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
6870 kUP=\E[a, kUP5=\EOa, use=vt220+vtedit,
6872 # rxvt was originally "xvt", first announced in April 1993:
6873 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
6874 #------------------------------------------------------------------------------
6875 # Article: 567 of comp.os.linux.announce
6876 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
6877 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
6878 # From: nation@rocket.sanders.com (Robert Nation)
6879 # Newsgroups: comp.os.linux.announce
6880 # Subject: xvt upload
6881 # Date: 16 Apr 1993 18:13:07 GMT
6882 # Organization: Cornell Theory Center
6884 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
6885 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
6886 # NNTP-Posting-Host: theory.tc.cornell.edu
6887 # Keywords: xvt, xterm, Xwindows
6888 # Originator: mdw@theory.TC.Cornell.EDU
6890 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
6891 # rxvt.README on sunsite.unc.edu.
6893 # Xvt is an xterm replacement which uses a little less memory, and is
6894 # suitable for use on machines with small memories. Tek4010 support
6897 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
6898 # to make it a little more compact, and to add and remove certain features.
6902 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
6903 #------------------------------------------------------------------------------
6905 # Though its change-log does not mention this, John Davis has stated that he
6906 # was the author of the changes to use the bce ("new color model") which was
6907 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
6908 # dates, nor give developer's names. Initial color support was added for rxvt
6909 # "2.0", which was sometime in 1994.
6911 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
6912 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
6914 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
6915 # was from one of my bug-reports -TD
6917 # While the color model both for xterm and rxvt was based on Linux console,
6918 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
6919 # behavior: inserting/deleting characters does not fill the newly empty cell
6920 # with the default background color.
6921 rxvt|rxvt-color|rxvt terminal emulator (X Window System),
6923 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
6924 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
6925 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
6926 use=xterm+256color, use=rxvt,
6927 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
6928 use=xterm+88color, use=rxvt,
6929 rxvt-xpm|rxvt terminal emulator (X Window System with xpm),
6931 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
6932 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6933 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6934 \302x\263y\363z\362{\343|\330}\234~\376,
6936 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
6937 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6938 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6939 \302x\263y\363z\362{\343|\330~\376,
6942 # This variant is supposed to work with rxvt 2.7.7 when compiled with
6943 # NO_BRIGHTCOLOR defined. rxvt needs more work...
6944 rxvt-16color|rxvt with 16 colors like aixterm,
6945 ncv#32, use=ibm+16color, use=rxvt,
6950 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
6951 # makes its function-keys different from other flavors of rxvt -TD
6953 # Testing with tack:
6954 # + made custom description (below) to work, though it sets TERM=xterm.
6956 # Testing with vttest:
6957 # + While "based on" rxvt, some of the basic functionality is broken. The
6958 # window collapses to a single line when running several of the screens
6959 # in vttest, e.g., the tests for cursor movement, screen features,
6960 # double-sized characters.
6961 # + The VT52 test works properly, but this is an exception. Due to the
6962 # other bug(s) most of vttest is untestable.
6963 # + the color test using ECH shows a gap in the bce model, like rxvt.
6965 # Testing with xterm "vttest" scripts:
6966 # + resize.pl does not work because mrxvt does implement CSI 18 t
6967 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
6968 # + none of the "dynamic colors" (OSC colors) scripts work.
6969 mrxvt|multitabbed rxvt,
6971 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
6972 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
6973 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
6974 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
6975 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
6976 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
6979 mrxvt-256color|multitabbed rxvt with 256 colors,
6980 use=xterm+256color, use=mrxvt,
6983 # From: Michael Jennings <mej@valinux.com>
6987 # removed kf0 which conflicts with kf10 -TD
6988 # remove cvvis which conflicts with cnorm -TD
6989 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
6990 # but does otherwise follow the rxvt+pcfkeys model -TD
6991 # remove nonworking flash -TD
6992 # remove km as per tack test -TD
6993 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
6994 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
6995 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
6996 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6997 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6998 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6999 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7000 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7001 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
7002 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
7003 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7004 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
7005 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
7006 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
7007 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
7008 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7009 rmam=\E[?7l, rmir=\E[4l, rmkx=, rmso=\E[27m, rmul=\E[24m,
7010 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
7011 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
7014 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
7015 %;m%?%p9%t\016%e\017%;,
7016 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=,
7017 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7018 use=xterm+alt47, use=vt100+enq, use=rxvt+pcfkeys,
7019 use=ecma+color, use=vt220+cvis,
7021 Eterm-256color|Eterm with xterm 256-colors,
7022 use=xterm+256color, use=Eterm,
7024 Eterm-88color|Eterm with 88 colors,
7025 use=xterm+88color, use=Eterm,
7028 # Based on rxvt 2.4.8, it has a few differences in key bindings
7029 aterm|AfterStep terminal,
7031 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
7035 # This is not based on xterm's source...
7036 # vttest shows several problems with keyboard, cursor-movements.
7037 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
7038 xiterm|internationalized terminal emulator for X,
7040 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
7044 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
7045 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
7046 # chars look like --esr)
7047 hpterm|X-hpterm|HP X11 terminal emulator (old),
7048 am, da, db, mir, xhp, xon,
7049 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
7050 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
7051 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
7052 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
7053 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
7054 kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
7055 khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, krmir=\ER,
7056 ktbc=\E3, meml=\El, memu=\Em,
7057 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7058 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7059 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7060 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
7061 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
7063 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
7064 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
7065 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
7066 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7067 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
7068 # HPUX 11 provides a color version.
7069 hpterm-color|HP X11 terminal emulator with color,
7073 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
7074 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
7076 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90081_198611_Facilities_for_Series_200_300_and_500.pdf
7077 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1987/97089-90081_198709_Facilities_for_Series_200_300_and_500_HP-UX_Concepts_and_Tutorials.pdf
7079 # This article does not cover the HP 46020A keyboard that is used by the Model
7080 # 217 and 237 computers. For information on this keyboard read the article,
7081 # "The Series 300 ITE as System Console" found in the manual, HP-UX Concepts
7082 # and Tutorials, Vol. 7.
7085 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90042_198608_HP-UX_Concepts_and_Tutorials.pdf
7087 # HP300_Series_ITE.pdf
7089 # This version, which came from Martin Trusler, was tested with lynx using
7091 hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color (new),
7092 OTbs, am, ccc, da, db, km, mir, xhp,
7093 colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8,
7095 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
7096 u+v+w+x|y<z>{*|!}\273~\362,
7097 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
7098 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
7099 dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
7100 home=\E&a0y0C, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7102 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
7103 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
7104 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
7105 %t1%e.%p7%d%;z%p1%dI,
7106 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
7107 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV,
7108 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
7109 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
7110 I\E&v1b1c6I\E&v1x1y7I,
7111 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7112 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7113 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7114 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
7115 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
7116 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
7118 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%p5%{8}%*%+%{64}%+%c%?
7119 %p9%t%'\016'%c%e%'\017'%c%;,
7120 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
7121 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
7122 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=hp+pfk-cr,
7125 # This is for the extensible terminal emulator on the X11R6 contrib tape.
7126 # It corresponds to emu's internal emulation:
7128 # emu's default sets TERM to "xterm", but that doesn't work well -TD
7129 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
7130 # fixes: add civis, cnorm, sgr -TD
7131 emu|emu native mode,
7132 am, bce, mir, msgr, xon,
7133 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
7134 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
7135 \224t\225u\226v\227w\230x\231~\244,
7136 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
7137 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
7138 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
7139 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
7140 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
7141 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
7142 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
7143 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
7144 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
7145 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
7146 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
7147 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
7148 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
7149 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
7150 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
7151 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
7153 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
7155 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
7157 # VT220 terminfo entry for the Emu emulation, corresponds to
7159 # with NumLock set (to make the keypad transmit kf0-kf9).
7160 # fixes: add am, xenl, corrected sgr0 -TD
7161 emu-220|Emu-220 (vt200-7bit mode),
7163 cols#80, it#8, lines#24, vt#200,
7164 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
7165 blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r,
7166 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
7167 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
7168 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
7169 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
7170 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
7171 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
7172 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
7173 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7174 kcuu1=\E[A, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl,
7175 kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR,
7176 kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~,
7177 kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~,
7178 kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt,
7179 kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx,
7180 kf9=\EOy, khlp=\E[28~, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O,
7181 rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
7182 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
7183 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
7184 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7185 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
7186 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=vt220+vtedit,
7190 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
7191 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
7192 # indicate that it emulates more than one terminal, but incompletely.
7194 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
7195 # It is based on vt102's entry, with some subtle differences, but also
7197 # supports ANSI colors (except for 'op' string)
7198 # apparently implements alternate screen like xterm
7199 # does not use padding, of course.
7200 mvterm|vv100|SwitchTerm aka mvTERM,
7201 am, km, mir, msgr, xenl, xon,
7202 colors#8, cols#80, it#8, lines#24, pairs#64,
7203 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7204 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7205 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7206 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7207 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7208 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7209 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I,
7210 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
7211 ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7212 kcuu1=\EOA, kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu,
7213 kf7=\EOv, kf8=\EOl, kf9=\EOw, op=\E[100m, rc=\E8, rev=\E[7m,
7214 ri=\EM, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7215 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
7216 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7217 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
7218 %;m%?%p9%t\016%e\017%;,
7219 sgr0=\E[m\017, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
7220 smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+fnkeys,
7225 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
7227 # "mterm -type ansi" sets $TERM to "ansi"
7228 mterm-ansi|ANSI emulation,
7231 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7232 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7233 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
7234 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7235 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
7236 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
7237 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
7238 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
7239 is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O,
7240 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
7241 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7242 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7243 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
7244 smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index,
7245 # mterm normally sets $TERM to "mterm"
7246 mterm|mouse-sun|Der Mouse term,
7249 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
7250 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
7251 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
7252 rmir=^O, rmso=^T, smir=^Q, smso=^V,
7253 # "mterm -type decansi" sets $TERM to "decansi"
7255 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
7256 decansi|ANSI emulation with DEC compatibility hacks,
7257 am, mir, msgr, xenl,
7258 colors#8, it#8, pairs#64,
7259 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7260 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7261 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
7262 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7263 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7264 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7265 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
7266 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
7267 il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H,
7268 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~,
7269 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7270 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7271 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7272 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
7273 kf8=\E[19~, kf9=\E[20~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
7274 ri=\E[T, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
7275 rmso=\E[27m, rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm,
7277 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7278 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7279 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7280 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7281 use=ansi+cpr, use=vt220+vtedit, use=ecma+index,
7285 # http://vwm.sourceforge.net/
7287 # VWM 2.0.2 (2009-05-01)
7288 # vwmterm is a terminal emulator written for the VWM console window manager.
7289 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
7290 vwmterm|VWM terminal,
7291 am, bce, ccc, mir, msgr, npc, xenl, xon,
7293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7294 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7295 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
7296 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7297 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m,
7298 ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=\n, invis=\E[8m,
7299 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7300 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7301 kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7302 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7303 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
7304 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
7306 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7307 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
7308 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
7309 smul=\E[4m, use=vt220+cvis, use=xterm+alt1049,
7313 # MGR is a Bell Labs window system lighter-weight than X.
7314 # These entries describe MGR's xterm-equivalent.
7315 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
7318 mgr|Bellcore MGR (non X) window system terminal emulation,
7320 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
7321 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
7322 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
7323 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
7324 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
7325 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
7326 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7327 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
7328 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
7330 mgr-sun|Mgr window with Sun keyboard,
7331 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
7332 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
7333 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
7334 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
7335 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
7336 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
7337 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
7338 mgr-linux|Mgr window with Linux keyboard,
7339 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
7340 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
7341 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
7342 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7343 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
7348 st|stterm|aka simpleterm,
7353 # there is some problem turning off line-drawing
7354 # shift+control function-keys do nothing; shift+control cursor keys work
7355 # the padding tests make the terminal non-functional.
7358 # SL/SR/REP do not work
7359 # ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
7361 # This entry discards the ccc/initc capabilities from st-0.7 because they
7362 # belong in st-256color.
7363 st-0.8|simpleterm 0.8,
7364 dim=\E[2m, kcbt@, kent@, oc=\E]104\007,
7365 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7366 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7367 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
7368 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
7369 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
7370 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
7371 use=ecma+strikeout, use=st-0.6,
7374 # dim is intermittent, sometimes works, sometimes does not
7375 # italics may show up with yellow color
7376 # has control cursor-keys, alt cursor-keys, still no combinations
7377 # has control pageup/down
7378 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
7379 # Se and Ss are implemented in the source-code, but the terminfo
7380 # provided with the source is incorrect, since Se/Ss are mis-coded
7381 # as booleans rather than strings.
7382 st-0.7|simpleterm 0.7,
7385 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
7386 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
7387 kcbt@, kent@, oc=\E]104\007,
7388 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7389 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7390 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
7391 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
7392 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
7393 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
7394 use=ecma+strikeout, use=st-0.6,
7398 # This version uses a table which supports a single modifier (a subset of
7399 # xterm's keys, using the same scheme). Because it supports only a single
7400 # modifier in this table, function keys f36-f48 are normally unavailable
7401 # because they are assigned to modifier-4.
7403 # The program assigns TERM to match the program name (the upstream source says
7404 # "st", but Debian renames it to "stterm").
7406 # The source includes two entries which are not useful here:
7407 # st-meta| simpleterm with meta key,
7408 # st-meta-256color| simpleterm with meta key and 256 colors,
7409 # because st's notion of "meta" does not correspond to the terminfo definition.
7410 # Rather, it acts like xterm - when the meta feature is disabled.
7413 # Added eo, removed ul -TD
7416 # implements control-modifier, but not control-shift for special keys
7417 # implements alt-modifier, but not alt-shift for special keys
7420 # http://git.suckless.org/st/log/st.info
7421 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
7422 # still has no function keys past kf36 (no combinations of modifiers)
7423 # no application keypad mode, e.g, kent.
7424 st-0.6|simpleterm 0.6,
7425 am, bce, hs, mir, msgr, npc, xenl, XT,
7426 colors#8, cols#80, it#8, lines#24, pairs#64,
7427 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
7429 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
7430 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7431 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7432 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7433 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7434 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7435 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
7436 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7437 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
7438 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
7439 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
7440 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
7441 kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
7442 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7443 kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F, kent=\EOM,
7444 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7445 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
7446 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
7447 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
7448 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
7449 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
7450 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
7451 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
7452 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
7453 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
7454 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
7455 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
7456 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
7457 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
7458 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
7459 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
7460 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
7461 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kil1=\E[2;5~,
7462 kind=\E[1;2B, kmous=\E[M, kri=\E[1;2A, krmir=\E[2;2~,
7463 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m, rc=\E8,
7464 rev=\E[7m, ri=\EM, rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>,
7465 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
7466 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7467 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7469 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7471 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7472 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
7473 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
7474 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u8=\E[?1;2c,
7475 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=ansi+enq,
7476 use=vt220+pcedit, use=ecma+index, use=xterm+alt1049,
7477 use=vt220+cvis, use=xterm+sl, use=ecma+italics,
7478 use=ecma+strikeout, use=bracketed+paste,
7482 # Note: the original terminfo description uses leading blank to persuade
7483 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
7486 # Reading the code shows it should work for aixterm 16-colors
7487 # - added st-16color
7490 # - set eo (erase-overstrike)
7492 # - tbc doesn't work
7494 # - cbt doesn't work
7495 # - shifted cursor-keys send sequences like rxvt
7496 # - sgr referred to unimplemented "invis" mode.
7497 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
7498 simpleterm|old-st|simpleterm 0.1.1,
7499 am, eo, mir, msgr, ul, xenl,
7500 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7501 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7502 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7503 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=\n,
7504 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7505 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
7506 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG,
7507 ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?,
7508 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7509 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
7510 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7511 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7512 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
7513 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
7514 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7515 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7517 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
7518 use=vt220+cvis, use=ecma+index,
7519 st-16color|stterm-16color|simpleterm with 16-colors,
7520 use=ibm+16color, use=st,
7521 # Tested with st 0.8.2
7522 # The issue with the titlebar is fixed, though st is very slow.
7523 # In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
7524 # garbage is shown in the titlebar.
7526 # terminal wants to use TERM=stterm-256color, but that is longer than 14
7527 # characters, making the choice nonportable.
7528 st-256color|stterm-256color|simpleterm with 256 colors,
7529 use=xterm+256color, use=st,
7532 # https://github.com/software-jessies-org/jessies/wiki/Terminator
7534 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
7535 # Debian/current -TD (2011/8/20)
7537 # There were some packaging problems:
7538 # a) using Java, the program starts off using 50Mb, and climbs from there,
7539 # up to 114Mb after testing (no scrollback).
7540 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
7541 # (two copies, just in case the host happens to be Mac OS X).
7542 # I deleted this after testing with tack.
7544 # Issues/features found with tack:
7545 # a) tbc does not work (implying that hts also is broken).
7546 # Comparing with the tabs utility shows a problem with the last tabstop on
7548 # b) has xterm-style shifted function-key strings
7549 # meta also is used, but control is ignored.
7550 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
7552 # d) some combinations of shift/control send xterm-style sequences for
7553 # insert/delete/home/end.
7554 # e) numeric keypad sends only numbers (compare with vttest).
7555 # f) meta mode (km) is not implemented.
7557 # Issues found with ncurses test-program:
7558 # a) bce is inconsistently implemented
7559 # b) widths of Unicode values above 256 do not always agree with wcwidth.
7561 # Checked with vttest, found low degree of compatibility there.
7563 # Checked with xterm's scripts, found that the 256-color palette is fixed.
7567 # b) corrected sgr0 to reset alternate character set
7568 # c) modified smacs/rmacs to use SCS rather than SI/SO
7572 # Revisiting in May 2019, the Debian package was no longer available, and a
7573 # developer-provided ".deb" does not work. However, a usable Windows ".msi"
7574 # (which relies upon Cygwin) can be tested. The developers provide a terminfo,
7575 # but some of the features it lists do not work reliably (bce, italics, invis).
7579 # invis attribute fails
7580 # key-definitions could be expanded, with some work:
7581 # + supports xterm-style cursor key-modifiers for shift
7582 # + supports xterm-style function key-modifiers for shift,control,alt
7583 # + supports xterm-style editing key-modifiers for shift,control,alt
7585 # ncurses test-program:
7586 # "C" menu shows that bce implementation is incomplete
7587 # italics did not work
7588 # dim worked once in tack, but not in ncurses test-program
7589 # "F" thick-line characters do not display
7591 # terminal does not respond to 80/132-column switching
7592 # wrapping at the right margin is erratic
7593 # there are several problems in the cursor-movements and screen-features
7594 # no VT52, no double-sized characters
7595 # Device attributes response says it is a vanilla VT100
7596 # does not respond to xterm mouse controls
7597 # alternate screen tests do not fill the screen, return wrong position
7598 # window modify/report operations do not work
7599 # miscellaneous ISO-6429 tests, e.g., REP, do not work
7600 # CBT, CHT, HPR, CNL,CPL, VPR do not work
7602 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
7603 # use xterm+256setaf, etc -TD
7604 terminator|Terminator no line wrap,
7605 bce, eo, mir, msgr, xenl, xon,
7606 cols#80, it#8, lines#24, lm#0,
7607 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7608 bold=\E[1m, clear=\E[H\E[2J, cr=\r,
7609 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7610 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7611 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7612 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7613 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7614 flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7615 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
7616 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
7617 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7618 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7619 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR,
7620 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
7621 kf9=\E[20~, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
7622 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
7623 rs2=\E[!p\E[?3;4l\E[4l\E>, s0ds=\E(B, s1ds=\E(0, sc=\E7,
7624 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
7625 %;m%?%p9%t\E(0%e\E(B%;,
7626 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
7627 smul=\E[4m, tbc=\E[3g, tsl=\E]2;, vpa=\E[%i%p1%dd,
7628 use=ansi+enq, use=vt220+pcedit, use=ecma+italics,
7629 use=ecma+index, use=xterm+256setaf, use=xterm+sl-twm,
7630 use=xterm+alt1049, use=vt220+cvis, use=bracketed+paste,
7633 # https://www.enlightenment.org/about-terminology
7634 # https://github.com/borisfaure/terminology
7637 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a VT100
7638 # emulator, nor is it compatible with xterm, but it uses a few features from
7642 # cursor does not fill on focus
7643 # there are pervasive problems with clearing/erasing parts of the screen
7644 # resizing the window causes it to stop listening to the keyboard
7646 # doesn't understand VT100 CPR needed for resize
7651 # uses bce model for colors, but (see below) fails the vttest screens
7652 # has partial support for 256color feature.
7653 # tack function-keys (a subset of xterm+pcf0), and
7654 # tack cursor-keys (a subset of xterm+pce2):
7655 # ctrl+shift (ignored)
7657 # shift-alt modifier -> shift (2)
7661 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
7662 # ctrl + khome/kend works - none of the other modifiers do
7664 # spits lots of messages from termptyesc.c especially in vttest.
7665 # no 132-column mode
7666 # fails menu 1, 2 (definitely not VT100-compatible)
7667 # primary (claims VT420 with several options, apparently none work) and
7668 # secondary report says (perhaps... VT420): \E[>41;285;0c
7669 # CHA, HPR, VPA, CNL, CPL work
7670 # BCE with ED/EL - fail
7671 # BCE with ECH/indexing - fail
7673 # unlike teken, background light/dark works
7675 # X10 and Normal mouse work
7676 # Any-event mouse works
7677 # Mouse button-event works
7679 # This description uses xterm+pcf0, which is misleading because the program
7680 # does not handle combinations of modifiers - but listing them all would
7681 # involve more effort than its developers spent -TD
7682 terminology-0.6.1|EFL-based terminal emulator (0.6.1),
7684 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
7685 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7686 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7687 kind=\E[1;2B, kri=\E[1;2A,
7688 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
7689 %;m%?%p9%t\016%e\017%;$<2>,
7690 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
7691 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
7692 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
7693 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
7694 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
7695 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
7696 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
7697 kRIT7=\E[1;7C, kUP=\E[1;2A, use=ansi+enq, use=xterm+pcf0,
7698 use=vt100, use=xterm+256setaf,
7701 # Tested terminology 1.0.0
7704 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
7705 # and control+alt were added like xterm+pcc2
7706 # Editing keys have some features from xterm+pce2
7707 # Changed from xterm+pcf0 to xterm+pcf2
7712 # Aside from the partial fixes for function/cursor/editing keys, no improvement
7713 # in other tests versus 0.6.1
7714 terminology-1.0.0|EFL-based terminal emulator (1.0.0),
7715 dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
7716 khome=\E[OH, rmacs=\E(B,
7717 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7718 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
7719 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
7720 use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2,
7721 use=xterm+pcf2, use=xterm+pcc2, use=bracketed+paste,
7722 use=terminology-0.6.1,
7725 # Tested terminology 1.8.1 using tack and vttest.
7727 # flash does not work
7728 # italics and crossed-out text work
7731 # DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling
7732 # DA2 says this is a VT510, version 33.7
7733 # NRCS does not work, program hangs in the locking shift test.
7734 # some of the VT420 rectangle operations work
7735 # left/right margins do not work
7736 # most of DECSCUSR works
7737 # most problems with bce are fixed.
7738 terminology-1.8.1|EFL-based terminal emulator (1.8.1),
7740 cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
7741 use=linux+kbs, use=ecma+index, use=xterm+256setaf,
7742 use=ansi+rep, use=ecma+strikeout, use=xterm+sm+1006,
7743 use=xterm+pcfkeys, use=xterm+tmux, use=vt220+cvis,
7744 use=ecma+italics, use=xterm-basic, use=report+version,
7746 terminology|EFL-based terminal emulator,
7747 use=terminology-1.8.1,
7749 ######## OPENGL CLIENTS
7752 # https://github.com/jwilm/alacritty
7753 # Version 0.6.0 (2020/11/25)
7754 # Version 0.4.0 (2019/11/25)
7755 # Version 0.3.3 (2019/08/03)
7756 # Version 0.2.1 (2018/10/03)
7757 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
7758 # terminal programs) is not designed to run with a remote server.
7760 # Packaged in Arch Linux -
7762 # initial screensize 24x80
7763 # no DECCOLM (does not switch between 80/132 columns)
7764 # otherwise, passes wrapping test
7766 # identifies as a VT102
7767 # numeric keypad does not send expected codes (seen in 0.4.0)
7770 # ECH works in 0.3.3 (0.2.1 left text on right margin)
7774 # does not implement any of the DECRQM/DECRPM controls
7775 # does not implement any of the DECRQSS controls
7780 # fails CHT, otherwise ECMA-48 cursor movement ok
7781 # fails ERM/SPA, SL, SR, passes REP, SD, SU
7784 # has normal and highlight mouse
7785 # has any-event and button-event mouse
7786 # + does support SGR-mouse
7787 # + does not correctly support focus in/out events (seen in 0.4.0)
7788 # cursor-position wrong after alternate-screen (fixed in 0.4.0)
7789 # none of the dtterm controls work
7791 # bell and flash do not work
7792 # blink does not work
7793 # italics and crossed-out work (latter did not work in 0.2.1)
7794 # function-keys work up (tested combinations which window manager allows)
7795 # treats meta as escape-prefix
7797 # The program sources include "alacritty" and "alacritty-direct", which are
7798 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
7799 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
7800 alacritty|alacritty terminal emulator,
7801 rs1=\Ec\E]104\007, use=xterm+256color,
7802 use=alacritty+common,
7804 alacritty-direct|alacritty with direct color indexing,
7805 use=xterm+indirect, use=alacritty+common,
7807 # cancel km, since it is not actually meta mode -TD
7808 # added ecma+strikeout in 0.3.3 -TD
7809 # added xterm+sl-twm in 0.3.3 -TD
7810 alacritty+common|base fragment for alacritty,
7812 kb2=\EOE, kbs=^?, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
7813 Smulx=\E[4:%p1%dm, use=ecma+index, use=xterm+sm+1006,
7814 use=xterm-basic, use=xterm+app, use=ansi+rep,
7815 use=xterm+tmux, use=ecma+strikeout, use=xterm+sl-twm,
7816 use=ecma+italics, use=xterm+pce2, use=xterm+pcc2,
7817 use=xterm+pcf2, use=bracketed+paste, use=xterm+focus,
7820 # https://github.com/kovidgoyal/kitty
7821 # Project started in 2016/10 (see alacritty), but is a Python script rather
7822 # than Rust, using OpenGL. The same caveats regarding remote connections
7823 # apply. This is not an X terminal, though (like alacritty), it copies
7824 # features from xterm.
7826 # Regarding the name "kitty", that is a pun, reflected in the description.
7828 # http://www.9bis.net/kitty/
7829 # https://github.com/kovidgoyal/kitty/issues/9
7830 # https://github.com/kovidgoyal/kitty/issues/1025
7832 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
7833 # https://github.com/kovidgoyal/kitty/issues/879
7835 # Version 0.21.2 (June 28, 2021)
7836 # changes since 0.19.1
7838 # Repeatable tests with tack and vttest assume a standard screensize --
7839 # measured in characters. However, kitty uses pixel-measurements and
7840 # does not readily use characters.
7841 # Resizing with twm shows only pixel-based hint rather than characters
7842 # manual page states that it is possible to override initial window size,
7843 # but configuration file has no effect on initial window size.
7844 # The same problem with XFCE4, but editing the cached json file works
7845 # for setting the window size (the "c" suffix for cells does not):
7846 # {"window-size": [720, 440]}
7847 # though the values depend upon the font in use.
7851 # invisible text still does not work
7852 # function/special key modifiers finally work
7854 # Version 0.19.1 (October 6, 2020)
7855 # changes since 0.13.3:
7858 # REP works, though using unspecified behavior
7860 # xterm's SGR-mouse mode is recognized.
7861 # does recognize original alternate-screen
7862 # bug: mouse focus in/out does not work.
7863 # bug: X10 mouse mode responds like any-event
7864 # bug: highlight-tracking does not work; terminal hangs.
7867 # rs1 adds an empty string for resetting title- and other OSC-strings.
7870 # Version 0.13.3 (January 19, 2019)
7872 # initial screensize 71x22
7873 # does not respond to "resize -s"
7874 # resizing with window manager gives no clues
7876 # does not switch between 80/132 columns
7877 # fails wrapping test, copying vte/rxvt
7878 # no reverse-background, no blink
7879 # claims to be VT200:
7881 # secondary \E[>1;4000;12c
7883 # no GR in the locking-shifts screen
7884 # no NRCS or ISO-2022, anyway
7887 # has DECTCEM, ECH, but no SRM and DECSCA
7888 # has operating condition report, none of the others
7891 # DECRQSS ok for DECSTBM, SGR, none of the others
7894 # DECXCPR device status works, none of the others
7895 # no left/right margins
7896 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
7897 # inside of DECCARA is uncolored
7898 # line-drawing with DECCARA does not work
7899 # aside from left/right margins, editing sequences look ok
7902 # fails ECH test for bce
7904 # fails REP, SL, SL, but other cursor-movement ok
7906 # does not recognize original alternate-screen
7907 # cursor-position wrong after alternate-screen
7908 # has normal mouse, any-event, any-button, but
7910 # no mouse-highlight tracking
7912 # dtterm - only supports report-size chars/pixels
7913 # recognizes tcap-query
7915 # flash doesn't work
7916 # italics do not work
7917 # bce should be set (but see vttest)
7918 #* developer's terminfo stopped at kf25, but the program continues,
7919 # copying xterm for the rest of the control+fkey sequence
7920 # (but only one modifier is supported, like iTerm2).
7921 #* it omitted shifted pageup/down
7922 #* control+editing keys work
7923 # In contrast to function-keys, some additional modifier combinations
7924 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
7925 # the implementation is incomplete, the building-blocks are consistent
7926 # with what has been implemented -TD
7927 # DECKPAM does not work -TD
7928 #* ka1, ka3, kc1, kc3 were bogus (removed)
7929 #* meta sends escape (removed kmm) -TD
7930 #* cvvis does not make cursor "more visible" -TD
7932 use=xterm+256color, use=kitty+common,
7933 kitty-direct|KovId's TTY using direct colors,
7934 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
7935 kitty+common|KovId's TTY common properties,
7936 am, mc5i, mir, msgr, npc, xenl,
7937 cols#80, it#8, lines#24,
7938 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7940 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
7941 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7942 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7943 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7944 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7945 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7946 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7947 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7948 ind=\n, kBEG=\E[1;2E, kbeg=\EOE, kbs=^?, kcbt=\E[Z,
7949 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7950 kdch1=\E[3~, kend=\EOF, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
7951 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
7952 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
7953 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
7954 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
7955 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
7956 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
7957 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
7958 kf35=\E[23;5~, kf36=\E[24;5~, kf4=\EOS, kf5=\E[15~,
7959 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH,
7960 kich1=\E[2~, kind=\E[1;2B, knp=\E[6~, kpp=\E[5~,
7961 kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7962 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l,
7963 rmso=\E[27m, rmul=\E[24m, rs1=\E]\E\\\Ec, sc=\E7,
7964 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7966 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7967 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7968 vpa=\E[%i%p1%dd, Smulx=\E[4:%p1%dm, use=ansi+enq,
7969 use=ansi+rep, use=xterm+sm+1006, use=ecma+index,
7970 use=xterm+pcfkeys, use=xterm+sl-twm,
7971 use=ecma+strikeout, use=ecma+italics,
7972 use=xterm+alt1049, use=att610+cvis, use=xterm+tmux,
7973 use=bracketed+paste, use=report+version,
7975 kitty+setal|set underline colors (nonstandard),
7976 setal=\E[58:2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1
7979 ######## WAYLAND CLIENTS
7982 # https://codeberg.org/dnkl/foot/
7985 # This identifies as a VT220 with 4=sixel and 22=color, however:
7987 # bell does not work
7988 # status-line does not work because foot does not set the window title
7989 # sends escape when meta key is used, whether or not smm/rmm enabled
7992 # no application-mode for numeric keypad (unless private mode 1035 is set)
7996 # protected areas do not work
7997 # SU/SD work, SL/SR do not
7998 # DECRPM responds, but not the corresponding ANSI reports.
7999 # otherwise few reports, except cursor-position and mouse and some dtterm
8000 # VT520 cursor-movement works, except for left/right margins
8001 # supports xterm/DECSCUSR, though default case in vttest does not blink
8002 # Send: <27> [ 0 <32> q
8003 # Text: The cursor should be a blinking rectangle
8004 # partial support for xterm mouse any-event mode and button-event mode:
8005 # + does not report focus-in/focus-out
8006 # + does not report buttons 6/7
8007 # alternate-screen works
8008 foot|foot terminal emulator,
8009 oc=\E]104\E\\, use=xterm+256color2, use=foot+base,
8011 foot-direct|foot with direct color indexing,
8012 use=xterm+direct, use=foot+base,
8014 foot+base|foot base fragment,
8015 am, bce, bw, hs, mir, msgr, npc, xenl, AX, XT,
8016 cols#80, it#8, lines#24,
8017 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8018 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8019 cub1=^H, cud1=\n, dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
8020 el1=\E[1K, flash=\E]555\E\\, ind=\n, invis=\E[8m,
8021 is2=\E[!p\E[4l\E>, kbs=^?, kcbt=\E[Z, oc=\E]104\E\\,
8022 op=\E[39;49m, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
8023 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
8025 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
8026 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
8027 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
8028 smso=\E[7m, smul=\E[4m, E3=\E[3J, use=att610+cvis,
8029 use=ansi+csr, use=ansi+cup, use=ansi+enq, use=ansi+local,
8030 use=ansi+idc, use=ansi+idl, use=ansi+rca2, use=ansi+rep,
8031 use=ansi+tabs, use=ecma+index, use=ecma+italics,
8032 use=ecma+strikeout, use=xterm+alt+title,
8033 use=xterm+pcfkeys, use=xterm+sm+1006, use=xterm+tmux2,
8034 use=xterm+sl-alt, use=bracketed+paste,
8035 use=report+version, use=xterm+focus,
8037 ######## WEB CLIENTS
8040 # https://domterm.org
8042 # Quoting its webpage:
8043 # The domterm command runs a server that manages sessions (usually shell
8044 # processes). The user interface and terminal emulation is handled by a
8045 # JavaScript library that can run in a regular web browser or an embedded
8046 # browser such as Electron, using Web Sockets to talk to the server.
8048 # it can connect to, and display in, a web browser, or as a standalone Qt
8049 # application. Either way, it displays in the current desktop session.
8051 # Testing current code (2019/07/06) with Fedora 30:
8060 # bce screen shows diagonal lines...
8062 # kf11 toggles maximize
8063 # cursor-key application mode works
8064 # numeric keypad application does not work; keys always send face-codes
8065 # sends utf-8 for meta, like xterm
8067 # has problems with menu #1 (wrapping)
8068 # DA = VT200 with 132 columns, color
8069 # DA2 = 990, 100300 ("\E[>990;100300;0c")
8070 # no VT52, no double-size characters
8071 # vt220 ECH test works, SRM, DECSCA do not
8072 # S7C1T/S8C1t does not work
8073 # DECUDK does not work
8074 # CNL does not work; the other ECMA-48 cursor-movement tests work
8075 # REP sort-of works (does not match xterm)
8076 # SD/SU work, but not SL/SR
8077 # window reporting: works for size in chars/pixels, but not other tests
8078 # X10 mouse clicks work -- but return 4 rather than 1 for codes
8079 # any-event mouse mode acts like any-button mode
8080 # implements SGR mouse-mode
8082 # does not implement initc
8083 # does accept either colons or semicolon in 38/48 SGR.
8084 domterm|DomTerm web client,
8086 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
8087 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8089 sitm@, smkx=\E[?1h, use=linux+kbs, use=xterm+256setaf,
8090 use=ecma+index, use=xterm+sm+1006, use=xterm+pcfkeys,
8091 use=xterm-basic, use=bracketed+paste,
8093 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
8096 # Columbus UNIX virtual terminal. This terminal also appears in
8097 # UNIX 4.0 and successors as line discipline 1 (?), but is
8098 # undocumented and does not really work quite right.
8099 cbunix|cb unix virtual terminal,
8101 cols#80, lines#24, lm#0,
8102 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8103 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
8104 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
8105 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
8106 smso=\Ea^D, smul=\Ea^A,
8107 # (vremote: removed obsolete ":nl@:" -- esr)
8108 vremote|virtual remote terminal,
8110 cols#79, use=cbunix,
8112 pty|4bsd pseudo teletype,
8113 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
8114 smso=\Ea$, smul=\Ea!, use=cbunix,
8118 # https://www.emacswiki.org/emacs/AnsiTerm
8119 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
8121 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
8122 eterm|GNU Emacs term.el terminal emulation,
8125 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
8126 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8127 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8128 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8129 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8130 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
8131 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m, rmir=\E[4l,
8132 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smir=\E[4h, smso=\E[7m,
8133 smul=\E[4m, use=xterm+alt47, use=ansi+cpr,
8135 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
8136 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
8139 blink=\E[5m, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
8140 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8141 op=\E[39;49m, rc=\E8, ri=\EM, rmso=\E[27m, rmul=\E[24m,
8142 rs1=\Ec, sc=\E7, setab=\E[%p1%'('%+%dm,
8143 setaf=\E[%p1%{30}%+%dm,
8144 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
8146 sgr0=\E[m, use=vt220+pcedit, use=eterm,
8148 # shell.el can "do" color, though not nearly as well.
8151 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
8154 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
8155 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
8156 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
8158 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
8159 # frequently. The contemporaneous term.el aka ansi-term does not "support"
8160 # italics but does not lose the color information -TD 2017/01/28.
8161 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
8163 colors#8, it#8, ncv#13, pairs#64,
8164 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
8165 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8166 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
8170 # Entries for use by the `screen' program by Juergen Weigert,
8171 # Michael Schroeder, Oliver Laumann. The screen and
8172 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
8173 # come from University of Wisconsin and may be older.
8174 # (screen: added <cnorm> on ANSI model -- esr)
8176 # 'screen' defines extensions to termcap. Some are used in its terminal
8178 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
8179 # AX (bool) Does understand ANSI set default fg/bg color
8180 # (\E[39m / \E[49m).
8181 # S0 (str) Switch charset 'G0' to the specified charset.
8182 # E0 (str) Switch charset 'G0' back to standard charset.
8184 # Initially tested with screen 3.09.08
8186 # According to its manual page
8188 # Screen is a full-screen window manager that multiplexes a physical
8189 # terminal between several processes (typically interactive shells). Each
8190 # virtual terminal provides the functions of a DEC VT100 terminal and, in
8191 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
8192 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
8193 # multiple character sets).
8195 # However, there is a design error in its support for video highlights. The
8196 # program uses a table (rendlist) which equates the SGR codes to terminal
8197 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
8198 # is modified only by the presence or absence of the corresponding capabilities.
8199 # Not by their values.
8201 # If screen sets the TERMCAP variable, it uses hardcoded strings which
8202 # correspond to the rendlist table.
8204 # The table gives this information:
8216 # 22 reset bold, standout and dim
8218 # 24 reset underline
8223 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
8224 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
8225 # Without some redesign of screen, it is not possible to extend the set of
8226 # capabilities. Substitution would be possible, e.g., sending italics in
8227 # place of underline.
8229 # Because screen uses hard-coded parsing, it does not check if two capabilities
8230 # use the same value. For example, changing standout to be the same as any of
8231 # the other capabilities will confuse screen. Curses applications which use
8232 # sgr are not impacted (because that usually resets all capabilities before
8233 # setting any), but termcap applications do not use sgr -TD
8235 # The "screen" entry should use ecma+index rather than just indn, but tmux
8236 # defaults to using "screen". For background, screen supported ecma+index
8237 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
8238 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
8239 # terminfo entries (which list about 60% of the control sequences).
8240 screen-base|VT 100/ANSI X3.64 virtual terminal (base),
8241 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
8242 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
8243 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
8245 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8246 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
8247 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8248 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8249 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8250 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8251 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8252 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
8253 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8254 ind=\n, indn=\E[%p1%dS, is2=\E)0, kcbt=\E[Z, kcub1=\EOD,
8255 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
8256 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
8257 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8258 kmous=\E[M, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
8259 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
8260 rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
8261 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
8262 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
8263 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
8264 smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
8265 E0=\E(B, S0=\E(%p1%c, use=xterm+kbs, use=vt220+pcedit,
8266 use=xterm+alt1049, use=ecma+color, use=vt100+enq,
8268 screen|VT 100/ANSI X3.64 virtual terminal,
8271 no+brackets|cancel bracketed paste,
8274 # The bce and status-line entries are from screen 3.9.13 (and require some
8275 # changes to .screenrc).
8276 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
8279 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
8280 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
8282 # ======================================================================
8283 # Entries for GNU Screen with 16 colors.
8284 # Those variations permit to benefit from 16 colors palette, and from
8285 # bold font and blink attribute separated from bright colors. But they
8286 # are less portable than the generic "screen" 8 color entries: Their
8287 # usage makes real sense only if the terminals you attach and reattach
8288 # do all support 16 color palette.
8290 screen-16color|GNU Screen with 16 colors,
8291 use=ibm+16color, use=screen,
8293 screen-16color-s|GNU Screen with 16 colors and status line,
8294 use=ibm+16color, use=screen-s,
8296 screen-16color-bce|GNU Screen with 16 colors and BCE,
8297 use=ibm+16color, use=screen-bce,
8299 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
8300 bce, use=ibm+16color, use=screen-s,
8302 # ======================================================================
8303 # Entries for GNU Screen 4.02 with --enable-colors256.
8305 screen-256color|GNU Screen with 256 colors,
8306 use=xterm+256setaf, use=screen,
8308 screen-256color-s|GNU Screen with 256 colors and status line,
8309 use=xterm+256setaf, use=screen-s,
8311 screen-256color-bce|GNU Screen with 256 colors and BCE,
8312 bce, use=xterm+256setaf, use=screen-bce,
8314 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
8315 bce, use=xterm+256setaf, use=screen-s,
8317 screen.xterm-256color|GNU Screen with xterm using 256 colors,
8318 use=xterm+256setaf, use=screen.xterm-new,
8320 screen.konsole-256color|GNU Screen with konsole using 256 colors,
8321 XR@, use=xterm+256setaf, use=screen.konsole,
8323 screen.vte-256color|GNU Screen with vte using 256 colors,
8324 use=xterm+256setaf, use=screen.vte,
8326 screen.putty-256color|GNU Screen with putty using 256 colors,
8327 use=xterm+256setaf, use=screen.putty,
8329 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
8330 XR@, use=xterm+256setaf, use=screen.mlterm,
8332 # ======================================================================
8334 # Read the fine manpage:
8335 # When screen tries to figure out a terminal name for
8336 # itself, it first looks for an entry named "screen.<term>",
8337 # where <term> is the contents of your $TERM variable. If
8338 # no such entry exists, screen tries "screen" (or "screen-w"
8339 # if the terminal is wide (132 cols or more)). If even this
8340 # entry cannot be found, "vt100" is used as a substitute.
8342 # Notwithstanding the manpage, screen uses its own notion of the termcap
8343 # and some keys from "screen.<term>" are ignored. Here is an entry which
8344 # covers those (tested with screen 4.00.02) -TD
8345 screen+fkeys|function-keys according to screen,
8346 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
8349 # See explanation before "screen" entry. Cancel italics so that applications
8350 # do not assume screen supports the feature. Add this tweak to entries which
8351 # extend screen for terminals which do support italics.
8352 screen+italics|screen cannot support italics,
8355 # Here are a few customized entries which are useful -TD
8358 # (a) screen does not support invis.
8359 # (b) screen's implementation of bw is incorrect according to tack.
8360 # (c) screen appears to hardcode the strings for khome/kend, making it
8361 # necessary to override the "use=" clause's values (screen+fkeys).
8362 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
8363 # which is NOT the same as the terminfo screen.<term>.
8364 # (e) when screen finds one of these customized entries, it sets $TERM to
8365 # match. Hence, no "screen.xterm" entry is provided, since that would
8366 # create heartburn for people running remote xterm's.
8367 # (f) screen does not support rep.
8368 # (g) the xterm-new compatibility does not include bracketed paste.
8370 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
8371 # since the default translations override the built-in keycode
8372 # translation. They are suppressed here to show what is tested by tack.
8373 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
8375 invis@, kIC@, kNXT@, kPRV@, kcbt=\E[Z, kent=\EOM, meml@, memu@,
8377 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8378 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
8379 E3@, use=screen+italics, use=screen+fkeys,
8380 use=xterm+x11mouse, use=ecma+index, use=ansi+rep,
8381 use=ecma+strikeout, use=xterm+pcfkeys,
8384 # Don't use this, because not everyone has "screen.xterm-new":
8385 #:screen.xterm|screen for modern xterm,
8386 #: use=screen.xterm-new,
8388 # xterm-r6 does not really support khome/kend unless it is propped up by
8389 # the translations resource.
8390 screen.xterm-r6|screen customized for X11R6 xterm,
8391 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
8392 # Color applications running in screen and TeraTerm do not play well together
8393 # on Solaris because Sun's curses implementation gets confused.
8394 screen.teraterm|disable ncv in teraterm,
8396 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
8397 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
8398 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
8399 use=screen+fkeys, use=xterm+x11mouse, use=screen,
8401 screen.rxvt|screen in rxvt,
8403 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8404 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
8405 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
8407 screen.Eterm|screen in Eterm,
8408 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
8409 screen.mrxvt|screen in mrxvt,
8410 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
8411 screen.vte|screen in any VTE-based terminal,
8412 use=xterm+x11mouse, use=screen+italics,
8413 use=screen+fkeys, use=no+brackets, use=vte,
8414 screen.gnome|screen in GNOME Terminal,
8415 use=xterm+x11mouse, use=screen+italics,
8416 use=screen+fkeys, use=no+brackets, use=gnome,
8417 screen.konsole|screen in KDE console window,
8418 XR@, use=xterm+x11mouse, use=screen+italics,
8419 use=screen+fkeys, use=no+brackets, use=konsole,
8420 # fix the backspace key
8421 screen.linux|screen.linux-s|screen in Linux console,
8423 kbs=^?, kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
8424 use=screen+fkeys, use=screen,
8425 screen.mlterm|screen in mlterm,
8426 XR@, use=xterm+x11mouse, use=screen+fkeys,
8427 use=no+brackets, use=mlterm,
8428 screen.putty|screen in putty,
8429 use=xterm+x11mouse, use=screen+fkeys, use=no+brackets,
8432 # The default "screen" entry is reasonably portable, but not optimal for the
8433 # most widely-used terminal emulators. The "bce" capability is supported in
8434 # screen since 3.9.13, and when used, will require fewer characters to be sent
8435 # to the terminal for updates.
8437 # If you are using only terminals which support bce, then you can use this
8438 # feature in your screen configuration.
8440 # Adding these lines to your ".screenrc" file will allow using these customized
8445 screen-bce.xterm-new|screen optimized for modern xterm,
8447 ech@, use=screen+italics, use=screen.xterm-new,
8448 screen-bce.rxvt|screen optimized for rxvt,
8450 ech@, use=screen.rxvt,
8451 screen-bce.Eterm|screen optimized for Eterm,
8453 ech@, use=screen.Eterm,
8454 screen-bce.mrxvt|screen optimized for mrxvt,
8456 ech@, use=screen.mrxvt,
8457 screen-bce.gnome|screen optimized for GNOME-Terminal,
8459 ech@, use=screen+italics, use=screen.gnome,
8460 screen-bce.konsole|screen optimized for KDE console window,
8462 ech@, use=screen+italics, use=screen.konsole,
8463 screen-bce.linux|screen optimized for Linux console,
8465 ech@, use=screen.linux,
8467 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
8468 cols#132, use=screen,
8470 screen2|VT 100/ANSI X3.64 virtual terminal (old 2.x),
8471 cols#80, it#8, lines#24,
8472 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
8473 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8474 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8475 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8476 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
8477 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8478 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
8479 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
8480 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
8481 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
8482 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
8483 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
8484 screen3|VT 100/ANSI X3.64 virtual terminal (old 3.x),
8486 cols#80, it#8, lines#24,
8487 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
8488 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8489 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8490 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8491 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8492 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
8493 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
8494 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
8495 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
8496 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
8497 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
8498 smul=\E[4m, tbc=\E[3g,
8500 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
8501 # was last updated in 2009 to include 256-color support. The most recent
8502 # release is 4.6.2 (October 2017).
8503 screen4|VT 100/ANSI X3.64 virtual terminal (4.x),
8504 use=ecma+index, use=screen-base,
8506 # As of December 2022, screen 5.0 has not been released.
8510 # https://savannah.gnu.org/bugs/?36676
8512 # mentions a change to implement italics which should be in a version 5,
8513 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the
8514 # longstanding use of SGR 3 for standout, and interprets it as italics.
8516 # The same development branch has some support for direct-colors, but none
8517 # of this has been documented.
8518 screen5|VT 100/ANSI X3.64 virtual terminal (someday),
8520 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8521 %p5%t;2%;m%?%p9%t\016%e\017%;,
8522 smso=\E[7m, use=ecma+italics, use=ecma+index,
8527 # tmux is mostly compatible with screen, but has support for italics, and some
8528 # of the xterm cursor bits.
8530 # However, unlike screen, tmux has no provision for using derived terminal
8531 # descriptions. When screen starts, it looks for a suitable "inner" terminal
8532 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
8533 # various entries such as screen.xterm-new provide a way to more closely
8534 # match the terminal.
8535 tmux|tmux terminal multiplexer,
8536 invis=\E[8m, kbs=^?, rmso=\E[27m,
8537 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
8538 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8539 smso=\E[7m, E3=\E[3J, Smulx=\E[4:%p1%dm,
8540 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
8541 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
8542 use=screen, use=bracketed+paste, use=report+version,
8545 tmux-256color|tmux with 256 colors,
8546 use=xterm+256setaf, use=tmux,
8548 tmux-direct|tmux with direct-color indexing,
8549 use=kitty+setal, use=xterm+direct, use=tmux,
8555 # mosh's DA1 identifies it as a VT220, but sets $TERM to "xterm" or
8556 # "xterm-256color" (hard-coded), which in its pretense that it is xterm, is
8557 # several years out of date.
8559 # There is little documentation; the existing manpages amount to a quarter of
8560 # the length of mosh.org's heavily promotional website. This entry is based
8561 # on testing, and reading the source-code. For the latter, analysis is aided
8562 # by the developer's extensive use of hard-coded strings.
8564 # The website has an example "Tricky unicode", which shows a shell command
8565 # with a typo (i.e., assuming that a byte in octal uses 4 digits) and suggests
8566 # that mosh and OS X Terminal "gets it right".
8568 # The example as shown would not work. Correcting the typo, xterm gives the
8569 # result expected by the mosh developer.
8571 # The other examples follow in a similar vein.
8573 # It does not support these xterm features:
8574 # use=ansi+rep (xterm patch #36, 1997)
8575 # use=ecma+strikeout (xterm patch #305, 2014)
8576 # use=vt420+lrmm (xterm patch #279, 2012)
8577 # titlestack in smcup/rmcup has no effect (xterm patch #251, 2009)
8578 # does not support "dim" (xterm patch #305, 2014)
8580 # rmkx/smkx has no effect on numeric keypad
8581 # acs stuff has no effect, is included here for ease of comparison
8583 # Unlike screen and tmux, mosh has only limited awareness of a terminal
8584 # description. It assumes that the underlying terminal is xterm, and would
8585 # not work well with terminals using other key-definitions, such as urxvt.
8588 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
8589 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
8590 sgr0=\E(B\E[m, use=ansi+enq, use=xterm+meta,
8591 use=ecma+italics, use=ecma+index, use=xterm+acs,
8592 use=xterm+sm+1006, use=xterm+pcfkeys,
8593 use=xterm-xfree86, use=bracketed+paste,
8595 mosh-256color|mosh using 256-colors,
8596 use=xterm+256color, use=mosh,
8601 # http://www.brain-dump.org/projects/dvtm/
8603 # + This uses ncurses to manage the display, including support for italics and
8605 # + However, default-colors are incomplete: do not set bce.
8606 # + It does not implement flash (since no \e[?5h)
8607 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
8608 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
8609 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
8610 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
8612 # + It also omits the shifted cursor- and editing-keypad keys.
8613 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
8614 # (and passes those through without interpretation)
8615 # and may simply pass-through rxvt's, making it appear to work.
8616 # In other cases such as kf23 and up, no pass-through is done.
8617 # + Most of the mode-settings in the initialization/reset strings are not
8618 # implemented; dvtm copies its description from rxvt.
8619 dvtm|dynamic virtual terminal manager,
8620 am, eo, mir, msgr, xenl, AX,
8621 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
8622 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8623 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8624 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8625 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8626 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8627 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8628 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8629 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8630 is1=\E[?47l\E=\E[?1l,
8631 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
8632 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
8633 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
8634 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
8635 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~,
8636 kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
8637 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8638 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8639 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$,
8640 kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
8641 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8642 khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, op=\E[39;49m,
8643 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
8645 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
8646 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
8648 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
8650 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
8652 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
8653 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+alt47,
8654 use=vt220+vtedit, use=vt220+cvis, use=ecma+italics,
8656 dvtm-256color|dynamic virtual terminal manager with 256 colors,
8657 colors#0x100, pairs#0x10000,
8658 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
8660 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
8666 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
8667 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
8668 # been maintained until recently by the National Center for Supercomputer
8669 # Applications, and it is feature rich, stable and free. It can be downloaded
8670 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
8671 # xterm+sl, and the docs at NCSA. It works well.
8673 # NCSA Telnet 2.6 for Macintosh in VT220 8-bit emulation mode
8674 # The terminal options should be set as follows:
8675 # Xterm sequences ON
8676 # use VT wrap mode ON
8677 # use Emacs arrow keys OFF
8678 # CTRL-COMND is Emacs meta ON
8680 # answerback string: "ncsa-vt220-8"
8681 # setup keys: all disabled
8683 # Application mode is not used.
8685 # Other special mappings:
8692 # PAGEDOWN Next Screen
8694 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
8697 # The status-line manipulation is a mapping of the xterm-compatible control
8698 # sequences for setting the window-title. So you must use tsl and fsl in
8699 # pairs, since the latter ends the string that is loaded to the window-title.
8700 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in VT220-8 mode,
8701 am, km, mir, msgr, xenl,
8702 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8703 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
8704 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8705 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8706 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8707 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8708 el=\E[K, el1=\E[1K, enacs=\E)0,
8709 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8710 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
8711 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
8712 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
8713 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8714 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
8715 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
8716 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
8717 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
8718 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
8719 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
8720 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
8721 rmso=\E[27m, rmul=\E[24m,
8722 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
8723 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
8725 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
8726 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8727 u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl,
8729 ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color),
8730 use=ncsa-m, use=klone+color,
8731 ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line),
8733 dsl@, fsl@, tsl@, use=ncsa,
8734 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line),
8736 dsl@, fsl@, tsl@, use=ncsa-m,
8738 # The documented function-key mapping refers to the Apple Extended Keyboard
8739 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
8740 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
8741 # some keyboards and many applications require these as F1-F4.
8743 ncsa-vt220|NCSA Telnet using VT220-compatible function keys,
8744 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8745 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8746 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
8747 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
8748 kf8=\E[19~, kf9=\E[20~, use=ncsa,
8750 #### Pilot Pro Palm-Top
8752 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
8753 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
8754 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
8757 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
8758 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
8759 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
8762 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
8763 # These entries are for the Embeddable Linux Kernel System (ELKS)
8764 # project - an heavily stripped down Linux to be run on 16 bit
8765 # boxes or, eventually, to be used in embedded systems - and have been
8766 # adapted from the stock ELKS termcap. The project itself looks stalled,
8767 # and the latest improvements I know of date back to March 2000.
8769 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
8770 # as an added bonus, this deals with all the capabilities common to
8771 # both VT52 and ANSI (or, eventually, "special") modes.
8773 elks-glasstty|ELKS glass-TTY capabilities,
8775 cols#80, it#8, lines#25,
8776 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
8779 elks-vt52|ELKS VT52 console,
8780 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8781 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
8782 home=\EH, use=elks-glasstty,
8784 elks-ansi|ELKS ANSI console,
8785 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8786 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8787 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
8789 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
8790 # instead of VT52, but the "elks" entry still refers to the latter.
8792 elks|default ELKS console,
8795 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
8796 # one but in screen size
8798 sibo|ELKS SIBO console,
8799 cols#61, it#8, lines#20, use=elks-vt52,
8801 ######## COMMERCIAL WORKSTATION CONSOLES
8807 # This is from the OSF/1 Release 1.0 termcap file
8808 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
8811 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8812 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8813 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
8814 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
8815 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8820 # :is1: resets scrolling region in case a previous user had used "tset VT100"
8821 oldsun|Sun Microsystems Workstation console,
8822 OTbs, am, km, mir, msgr,
8823 cols#80, it#8, lines#34,
8824 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
8825 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8826 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8827 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8828 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8829 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
8830 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
8831 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
8832 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
8833 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
8834 sun-il|Sun Microsystems console with working insert-line,
8837 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8838 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
8839 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
8840 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
8841 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8842 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
8843 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
8844 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
8845 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
8846 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
8847 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
8848 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8849 smso=\E[7m, u8=\E[1t, u9=\E[11t,
8850 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
8851 # flake out on the last line. Unfortunately, without them the terminal has no
8853 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
8854 il@, il1@, use=sun-il,
8856 # The Sun console was documented in the wscons manual page (apparently
8857 # unrelated to the "wscons" used by some of the BSDs).
8859 # https://illumos.org/man/4D/wscons
8860 # https://www.bitsavers.org/pdf/sun/sun1/800-0345_Sun-1_System_Reference_Manual_Jul82.pdf
8862 # The early cmdtool and shelltool programs in Sun's NeWS were based on this.
8863 # After NeWS was discontinued, XView provided a similar shelltool, with an
8864 # incomplete manual page. Presumably the intent was to document features of
8865 # shelltool not in wscons:
8867 # https://manpages.ubuntu.com/manpages/bionic/en/man1/shelltool.1.html
8868 # https://manpages.ubuntu.com/manpages/bionic/en/man1/cmdtool.1.html
8870 # The wscons manual page and the XView source show that it had no feature that
8871 # could be used in ncurses u6/u7/u8/u9 extensions. Interesting, the XView
8872 # source shows that its shelltool could tell the host what a particular mode
8873 # was set to. But neither that nor its CSI..t controls support u6/u7/u8/u9.
8875 # If you are using an SS5, change the sun definition to use sun-ss5.
8876 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
8879 sun+sl|Sun Workstation window status line,
8881 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
8883 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
8884 sun-s|Sun Microsystems Workstation window with status line,
8885 use=sun+sl, use=sun,
8886 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
8887 use=sun+sl, use=sun-e,
8888 sun-48|Sun 48-line window,
8889 cols#80, lines#48, use=sun,
8890 sun-34|Sun 34-line window,
8891 cols#80, lines#34, use=sun,
8892 sun-24|Sun 24-line window,
8893 cols#80, lines#24, use=sun,
8894 sun-17|Sun 17-line window,
8895 cols#80, lines#17, use=sun,
8896 sun-12|Sun 12-line window,
8897 cols#80, lines#12, use=sun,
8898 sun-1|Sun 1-line window for sysline,
8901 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
8902 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
8903 ich1@, rmir@, smir@, use=sun,
8904 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
8906 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
8907 sun-type4|Sun Workstation console with type 4 keyboard,
8908 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
8909 kcuu1=\E[215z, use=sun-il,
8911 # Most of the current references to sun-color are from users wondering why this
8912 # is the default on install. Details from reading the wscons manpage, adding
8913 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
8914 # when those were added -TD (2005-05-28)
8916 # According to wscons manpage, color is supported only on IA systems.
8917 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
8918 # does not list these. It also sets ncv#3, however that corresponds to
8919 # underline and standout.
8921 # Since the documentation and terminfo do not agree, see also current code at
8922 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
8924 # That (actually a different driver which "supports" sun-color) also supports
8931 # It supports bold, but not underline -TD (2009-09-19)
8932 sun-color|Sun Microsystems Workstation console with color support (IA systems),
8933 colors#8, ncv#3, pairs#64,
8934 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
8935 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
8936 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8937 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8939 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
8941 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
8942 smso=\E[7m, use=sun,
8947 # (wsiris: this had extension capabilities
8948 # :HS=\E7F2:HE=\E7F7:\
8949 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
8950 # See the note on Iris extensions near the end of this file.
8951 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
8952 # <flash> from BRL -- esr)
8953 wsiris|iris40|IRIS emulating a 40 line Visual 50 (approximately),
8954 OTbs, OTnc, OTpt, am,
8955 OTkn#3, cols#80, it#8, lines#40,
8956 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
8957 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8958 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
8959 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
8960 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
8961 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
8962 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
8963 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
8968 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
8969 # environment). Note: these have nothing to do with Sony's News workstation
8973 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
8974 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
8975 psterm|psterm-basic|NeWS psterm-80x34,
8976 OTbs, am, hs, km, ul,
8977 cols#80, it#8, lines#34,
8978 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
8979 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
8980 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
8981 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
8982 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
8983 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
8984 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
8986 psterm-96x48|NeWS psterm 96x48,
8987 cols#96, lines#48, use=psterm,
8988 psterm-90x28|NeWS psterm 90x28,
8989 cols#90, lines#28, use=psterm,
8990 psterm-80x24|NeWS psterm 80x24,
8991 cols#80, lines#24, use=psterm,
8992 # This is a faster termcap for psterm. Warning: if you use this termcap,
8993 # some control characters you type will do strange things to the screen.
8994 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
8995 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
8996 OTbs, am, hs, km, ul,
8997 cols#80, it#8, lines#34,
8998 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
8999 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
9000 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
9001 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9002 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
9003 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
9004 smso=^Oo, smul=^Ou, tsl=^Ol,
9008 # Use `glasstty' for the Workspace application
9011 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
9014 cols#80, it#8, lines#24,
9015 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
9016 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
9017 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9018 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
9019 nextshell|NeXT Shell application,
9022 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
9025 #### Sony NEWS workstations
9028 # (news-unk: this had :KB=news: -- esr)
9029 news-unk|Sony NEWS VT100 emulator common entry,
9030 OTbs, OTpt, am, xenl,
9032 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
9033 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
9034 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
9035 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9036 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
9037 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
9038 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
9039 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
9040 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
9041 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
9042 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
9043 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
9045 # (news-29: this had :TY=ascii: --esr)
9046 news-29|Sony NEWS VT100 emulator with 29 lines,
9047 lines#29, use=news-unk,
9048 # (news-29-euc: this had :TY=euc: --esr)
9049 news-29-euc|Sony NEWS VT100 emulator with 29 lines and EUC,
9051 # (news-29-sjis: this had :TY=sjis: --esr)
9052 news-29-sjis|Sony NEWS VT100 emulator with 29 lines and SJIS,
9055 # (news-33: this had :TY=ascii: --esr)
9056 news-33|Sony NEWS VT100 with 33 lines,
9057 lines#33, use=news-unk,
9058 # (news-33-euc: this had :TY=euc: --esr)
9059 news-33-euc|Sony NEWS VT100 with 33 lines and EUC,
9061 # (news-33-sjis: this had :TY=sjis: --esr)
9062 news-33-sjis|Sony NEWS VT100 with 33 lines and SJIS,
9065 # (news-42: this had :TY=ascii: --esr)
9066 news-42|Sony NEWS VT100 with 42 lines,
9067 lines#42, use=news-unk,
9068 # (news-42-euc: this had :TY=euc: --esr)
9069 news-42-euc|Sony NEWS VT100 with 42 lines and EUC,
9071 # (news-42-sjis: this had :TY=sjis: --esr)
9072 news-42-sjis|Sony NEWS VT100 with 42 lines and SJIS,
9075 # NEWS-OS old termcap entry
9077 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
9078 news-old-unk|old Sony NEWS VT100 emulator common entry,
9079 OTbs, OTpt, am, xenl,
9081 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
9082 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
9083 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
9084 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
9085 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
9086 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
9087 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
9088 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9089 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
9091 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
9092 nwp512|news|nwp514|news40|vt100-bm|nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|old Sony VT100 emulator 40 lines,
9095 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
9099 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
9100 nwp512-a|nwp514-a|news-a|news42|news40-a|old Sony VT100 emulator 42 line,
9102 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
9105 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
9106 nwp513|nwp518|nwe501|newscbm|news31|nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 31 lines,
9109 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
9113 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
9114 # also the alias vt100-bm.
9115 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old Sony VT100 emulator 33 lines,
9118 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
9122 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
9123 news28|old Sony VT100 emulator 28 lines,
9126 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
9130 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
9131 news29|news28-a|old Sony VT100 emulator 29 lines,
9133 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
9137 # (news511: this had :TY=sjis: --esr)
9138 nwp511|nwp-511|nwp-511 VT100,
9139 OTbs, OTpt, am, xenl,
9141 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
9142 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
9143 ed=\E[J$<30/>, el=\E[K$<3/>,
9144 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9145 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
9146 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
9147 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
9148 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9149 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
9150 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
9151 # (news517: this had :TY=sjis:. --esr)
9152 nwp517|nwp-517|nwp-517 VT200 80 cols 30 rows,
9155 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
9156 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9157 tsl=\E[1$}\E[;%df, use=vt220-base,
9158 # (news517-w: this had :TY=sjis:. --esr)
9159 nwp517-w|nwp-517-w|nwp-517 VT200 132 cols 50 rows,
9162 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
9163 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
9164 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
9165 tsl=\E[1$}\E[;%df, use=vt220-base,
9167 #### Common Desktop Environment
9170 # This ships with Sun's CDE in Solaris 2.5
9171 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
9172 dtterm|CDE desktop terminal,
9173 am, mir, msgr, xenl, xon,
9174 cols#80, it#8, lines#24, lm#0, ncv@,
9175 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9176 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
9177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9178 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
9179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9180 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
9181 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
9182 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
9183 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
9184 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
9185 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9186 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9187 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9188 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
9189 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
9190 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9191 khlp=\E[28~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
9192 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
9194 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9195 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9196 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9197 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=decid+cpr,
9198 use=vt220+vtedit, use=vt220+cvis, use=ecma+color,
9200 ######## Non-Unix Consoles
9203 #### EMX termcap.dat compatibility modes
9205 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
9206 # no_color_video to inform the application that standout(1), underline(2)
9207 # reverse(4) and invisible(64) don't work with color.
9208 emx-base|DOS special keys,
9211 bel=^G, use=ansi.sys,
9213 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
9214 # a Unix-style environment used on OS/2. (Note that the suffix makes some
9215 # names longer than 14 characters, the nominal maximum).
9217 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
9218 ansi-emx|ANSI.SYS color,
9219 am, bce, eo, mir, msgr, xon,
9220 colors#8, cols#80, it#8, lines#25, pairs#64,
9221 bel=^G, blink=\E[5m, bold=\E[1m,
9222 clear=\E[1;33;44m\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
9223 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9224 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
9225 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
9226 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
9227 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
9228 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
9229 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
9230 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
9231 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
9232 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=vt220+cvis,
9234 # nice colors for Emacs (white on blue, mode line white on cyan)
9235 ansi-color-2-emx|ANSI.SYS color 2,
9236 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
9237 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
9238 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
9239 smul=\E[1;36;44m, use=ansi-emx,
9240 # nice colors for Emacs (white on black, mode line black on cyan)
9241 ansi-color-3-emx|ANSI.SYS color 3,
9242 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
9243 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
9244 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
9245 smul=\E[0;36;40m, use=ansi-emx,
9246 mono-emx|stupid monochrome ANSI terminal with only one kind of emphasis,
9248 cols#80, it#8, lines#24,
9249 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
9250 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
9251 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
9252 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
9253 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
9254 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
9259 # Use this for cygwin32 (tested with beta 19.1)
9260 # underline is colored bright magenta
9261 # shifted kf1-kf12 are kf11-kf22
9262 cygwinB19|ANSI emulation for cygwin32,
9263 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A,
9264 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9265 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9266 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
9267 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
9268 kf8=\E[19~, kf9=\E[20~, rmam@, smam@, use=vt220+pcedit,
9271 # Use this for cygwin (tested with version 1.1.0).
9272 # I've combined pcansi and linux. Some values of course were different and
9273 # I've indicated which of these were and which I used.
9274 # Cheers, earnie_boyd@yahoo.com
9275 # several changes based on running with tack and comparing with older entry -TD
9276 # more changes from csw:
9278 # remove eo [erase overstrike with blank]
9279 # change clear was \E[H\E[J now \E[2J (faster?)
9282 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
9284 # add cub [cursor back param]
9285 # add cuf [cursor forward param]
9286 # add cuu [cursor up param]
9287 # add cud [cursor down param]
9288 # add hs [has status line]
9289 # add fsl [return from status line]
9290 # add tsl [go to status line]
9291 # add smacs [Start alt charset] (not sure if this works)
9292 # add rmacs [End alt charset] (ditto)
9293 # add smcup [enter_ca_mode] (save console; thanks Corinna)
9294 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
9295 # add kb2 [center of keypad]
9296 # add u8 [user string 8] \E[?6c
9297 # add el [clear to end of line] \E[K
9299 # cnorm [make cursor normal] not implemented
9300 # flash [flash] not implemented
9301 # blink [blink] not implemented very usefully in cygwin? \E[5m
9302 # dim [dim] not implemented very usefully in cygwin? \E[2m
9303 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
9304 # kNXT [shifted next key] not implemented
9305 # kPRV [shifted prev key] not implemented
9306 # khome [home key] really is \E[1~ NOT \E[H
9307 # tbc [clear tab stops] not implemented
9308 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
9309 # smpch [Start PC charset] is \E[11m, same as smacs
9310 # rmpch [End PC charset] is \E[10m, same as rmacs
9311 # mir [move in insert mode] fails in tack?
9312 # bce [back color erase] causes problems with change background color?
9313 # cvvis [make cursor very visible] causes a stackdump when testing with
9314 # testcurs using the output option? \E[?25h\E[?8c
9315 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
9316 # ech [erase characters param] broken \E[%p1%dX
9317 # kcbt [back-tab key] not implemented in cygwin? \E[Z
9320 # Remove cbt since it does not work in current cygwin
9321 # Add 'mir' and 'in' flags based on tack
9322 cygwin|ANSI emulation for Cygwin,
9323 am, hs, mir, msgr, xon,
9324 colors#8, it#8, pairs#64,
9325 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9326 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9327 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9328 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
9329 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9330 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9331 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9332 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
9333 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
9334 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
9335 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9336 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9337 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9338 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
9339 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
9340 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kspd=^Z, nel=\r\n,
9341 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m,
9342 rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
9343 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9344 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
9345 %t;8%;%?%p9%t;11%;m,
9346 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m,
9347 smso=\E[7m, smul=\E[4m, tsl=\E];, vpa=\E[%i%p1%dd,
9348 use=xterm+alt47, use=vt220+pcedit, use=vt102+enq,
9350 # I've supplied this so that you can help test new values and add other
9351 # features. Cheers, earnie_boyd@yahoo.com.
9353 # Some features are from pcansi. The op value is from linux. Function-keys
9354 # are from linux. These have been tested not to cause problems. xenl was in
9355 # this list, but DOES cause problems so it has been removed
9356 cygwinDBG|Debug Version for Cygwin,
9357 am, eo, mir, msgr, xon,
9358 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
9359 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9360 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9361 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9362 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
9363 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
9364 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9365 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
9366 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
9367 el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
9368 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
9369 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$,
9370 kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9371 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, kf10=\E[21~,
9372 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9373 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9374 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
9375 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9376 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
9377 rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9378 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
9379 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
9380 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
9381 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
9382 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt220+pcedit,
9383 use=vt220+cvis, use=vt102+enq,
9388 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
9389 # encodings used by other x86 environments. All others are invented for DJGPP.
9390 # Oddly enough, while several combinations of modifiers are tabulated, there is
9391 # none for shifted cursor keys.
9443 # Ctrl-Delete \E[43~
9444 # Ctrl-Down Arrow \E[38~
9447 # Ctrl-Insert \E[42~
9448 # Ctrl-Left Arrow \E[39~
9449 # Ctrl-Page Down \E[46~
9450 # Ctrl-Page Up \E[45~
9451 # Ctrl-Right Arrow \E[40~
9452 # Ctrl-Up Arrow \E[37~
9468 # Alt-Down Arrow \E[60~
9472 # Alt-Left Arrow \E[61~
9473 # Alt-Page Down \E[68~
9474 # Alt-Page Up \E[67~
9475 # Alt-Right Arrow \E[62~
9476 # Alt-Up Arrow \E[59~
9505 djgpp|ANSI emulation for DJGPP alpha,
9506 am, bce, msgr, xhp, xon, xt,
9507 colors#8, it#8, pairs#64,
9508 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9509 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9510 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9511 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9512 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
9513 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9514 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9515 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9516 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
9517 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
9518 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
9519 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9520 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9521 kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
9522 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\r\n, op=\E[37;40m,
9523 rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
9525 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
9526 %p6%t;1%;%?%p7%t;8%;m,
9527 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9528 use=vt220+pcedit, use=ecma+index,
9530 djgpp203|entry for DJGPP 2.03,
9532 cols#80, it#8, lines#25,
9533 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
9536 djgpp204|entry for DJGPP 2.04,
9538 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
9539 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
9540 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
9541 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9542 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9543 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
9544 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9545 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
9546 il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D,
9547 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, kf1=\E[[A,
9548 kf10=\E[21~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
9549 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kll=\E[4~,
9550 nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm,
9551 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9552 use=vt220+pcedit, use=ecma+index,
9556 # This is tested using U/Win's telnet. Scrolling is omitted because it is
9557 # buggy. Another odd bug appears when displaying "~" in alternate character
9558 # set (the emulator spits out error messages). Compare with att6386 -TD
9559 uwin|U/Win 3.2 console,
9560 am, eo, in, msgr, xenl, xon,
9561 colors#8, it#8, ncv#58, pairs#64,
9562 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
9563 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
9564 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
9565 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
9566 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9567 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9568 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
9569 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D,
9570 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y,
9571 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
9572 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
9573 kf9=\EOX, khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m,
9574 rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
9575 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
9576 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
9577 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
9578 smul=\E[4m, tbc=\E[3g, use=ansi+cpr, use=vt220+cvis,
9580 #### Microsoft (miscellaneous)
9582 # This entry fits the Windows NT console when the _POSIX_TERM environment
9583 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
9584 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
9585 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
9586 # systems is not, and (surprise!) they match very well.
9588 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
9589 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
9590 # are the installation instructions a pile of mind-numbing bureaucratese,
9591 # but the termcap entry is actually broken and unusable as given; the :do:
9592 # capability is misspelled "d".
9594 # To use this, you need to a bunch of environment variables:
9596 # SET _POSIX_TERM=on
9598 # SET TERMCAP=location of termcap file in POSIX file format
9599 # which is case-sensitive.
9600 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
9603 # Important note: setting the TMP environment variable in POSIX style renders
9604 # it incompatible with a lot of other applications, including Visual C++. So
9605 # you should have a separate command window just for vi. All the other
9606 # variables may be permanently set in the Control Panel\System applet.
9608 # You can find out more about the restrictions of this facility at
9609 # <https://jeffpar.github.io/kbarchive/kb/108/Q108581/>
9611 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
9612 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
9614 cols#80, it#8, lines#25,
9615 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
9616 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
9617 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
9618 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
9619 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
9620 # From: jew@venus.sunquest.com
9621 # Date: 19 Feb 93 23:41:07 GMT
9622 # Here's a combination of ansi and vt100 termcap
9623 # entries that works nearly perfectly for me
9624 # (Gateway 2000 Handbook and Microsoft Works 3.0):
9625 pcmw|PC running Microsoft Works,
9627 cols#80, it#8, lines#24, vt#3,
9628 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
9629 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
9630 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
9631 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
9632 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
9633 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9634 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
9635 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
9636 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
9637 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9638 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
9641 # From: Federico Bianchi
9642 # This is the entry for the OpenNT terminal.
9643 # The ntconsole name is for backward compatibility.
9644 # This is for OpenNT 2.0 and later.
9645 # Later OpenNT was renamed to Interix.
9647 # Presently it is distributed by Microsoft as Services For Unix (SFU).
9648 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
9649 # the documentation dated from 1.9.9e) -TD
9651 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
9652 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
9653 # kf13-kf24 use the shift-key
9654 # kf25-kf36 use the left alt-key
9655 # kf37-kf38 use the control-key
9656 # kf49-kf60 use the shift- and control-keys
9657 # The shifted cursor keys send the sequences originally used for kf61-kf64:
9660 # left=\EF^ (unassigned)
9663 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
9665 cols#80, it#8, lines#25,
9666 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
9667 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
9668 \301w\302x\263y\363z\362{\343|\330}\234~\376,
9669 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
9670 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
9671 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9672 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
9673 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
9674 kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9675 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U,
9676 kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC,
9677 kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH,
9678 kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL,
9679 kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ,
9680 kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU,
9681 kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ,
9682 kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4,
9683 kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi,
9684 kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo,
9685 kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs,
9686 kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx,
9687 kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9,
9688 khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T,
9689 kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u,
9690 rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
9691 rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b,
9692 smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color,
9694 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
9695 lines#35, use=opennt,
9697 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
9698 lines#50, use=opennt,
9700 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
9701 lines#60, use=opennt,
9703 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
9704 lines#100, use=opennt,
9706 # OpenNT wide terminals
9707 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
9708 cols#125, use=opennt,
9710 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
9711 lines#35, use=opennt-w,
9713 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
9714 lines#50, use=opennt-w,
9716 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
9717 lines#60, use=opennt-w,
9719 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
9720 cols#132, use=opennt,
9722 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
9723 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
9724 rmcup@, smcup@, use=opennt,
9726 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
9727 lines#35, use=opennt-nti,
9729 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
9730 lines#50, use=opennt-nti,
9732 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
9733 lines#60, use=opennt-nti,
9735 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
9736 lines#100, use=opennt-nti,
9738 ######## COMMON TERMINAL TYPES
9740 # This section describes terminal classes and maker brands that are still
9741 # quite common, but have proprietary command sets not blessed by ANSI.
9746 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
9747 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
9748 # Acer has a web site at http://www.acer.com.
9750 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
9751 # His comments suggest they were shipped with the system.
9754 # (altos2: had extension capabilities
9755 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9756 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9757 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9758 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9759 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9760 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
9761 # :HL=^AP\r:SP=\E[i:\
9762 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
9763 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
9764 # Comparison with the k* capabilities makes it obvious that the c* things are
9765 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
9766 # :sr: was given as a boolean-- esr)
9767 altos2|alt2|altos-2|Altos II,
9768 cols#80, it#8, lines#24, xmc#0,
9769 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
9770 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
9771 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
9772 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
9773 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
9774 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
9775 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
9776 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9777 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9778 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9779 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9780 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
9781 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
9782 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
9783 # (altos3: had extension capabilities
9784 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9785 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9786 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9787 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9788 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
9789 # :HL=^AP\r:SP=\E[i:\
9790 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
9791 altos3|altos5|alt3|alt5|altos-3|altos-5|Altos III or V,
9792 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
9793 altos4|alt4|altos-4|Altos IV,
9795 # (altos7: had extension capabilities:
9796 # :GG#0:GI=\EH8:GF=\EH7:\
9797 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
9798 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
9799 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
9800 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
9801 # Comparison with the k* capabilities makes it obvious that the c* things are
9802 # shift keys. I have renamed them to keys 32 and up accordingly. I have
9803 # also made this entry relative to adm12 in order to give it an <sgr>. The
9804 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
9805 altos7|alt7|Altos VII,
9807 cols#80, lines#24, xmc#0,
9808 acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt,
9809 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9810 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9811 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
9813 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
9814 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
9815 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
9816 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
9817 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
9818 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
9819 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9820 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
9821 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
9822 rmir=\Er, smir=\Eq, use=adm+sgr,
9823 altos7pc|alt7pc|Altos PC VII,
9824 kend=\ET, use=altos7,
9826 #### Hewlett-Packard (hp)
9829 # 8000 Foothills Blvd
9830 # Roseville, CA 95747
9831 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
9832 # 1-(800)-633-3600 (General customer support)
9835 # As of March 1998, HP no longer has any terminals in production.
9836 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
9837 # supported (they still have parts). So are the 2392a and 2394a.
9838 # See the WORKSTATION CONSOLES section for the 700s.
9841 # Generic HP terminal - this should (hopefully) work on any HP terminal.
9842 hpgeneric|hp|Hewlett-Packard generic terminal,
9843 OTbs, OTpt, am, da, db, mir, xhp,
9844 cols#80, lines#24, lm#0, vt#6,
9845 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9846 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
9847 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
9848 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
9849 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
9852 hp110|Hewlett-Packard model 110 portable,
9853 lines#16, use=hpgeneric,
9855 hp+pfk+cr|HP function keys with CR,
9856 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
9857 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
9859 hp+pfk-cr|HP function keys w/o CR,
9860 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
9863 # The hp2621s use the same keys for the arrows and function keys,
9864 # but not separate escape sequences. These definitions allow the
9865 # user to use those keys as arrow keys rather than as function
9867 hp+pfk+arrows|HP alternate arrow definitions,
9868 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
9869 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
9870 kll=\Eq\r, kri=\Es\r,
9872 hp+arrows|HP arrow definitions,
9873 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9874 kind=\ES, kll=\EF, kri=\ET,
9876 # Generic stuff from the HP 262x series
9878 hp262x|HP 262x terminals,
9880 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
9881 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9882 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9883 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
9884 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9885 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9886 %;%?%p4%t%{65}%|%;%c,
9887 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
9889 # Note: no <home> on HPs since that homes to top of memory, not screen.
9890 # Due to severe 2621 braindamage, the only way to get the arrow keys to
9891 # transmit anything at all is to turn on the function key labels
9892 # with <smkx>, and even then the user has to hold down shift!
9893 # The default 2621 turns off the labels except when it has to to
9894 # enable the function keys. If your installation prefers labels
9895 # on all the time, or off all the time (at the "expense" of the
9896 # function keys), use 2621-nl or 2621-wl.
9898 # Note: there are newer ROMs for 2621's that allow you to set
9899 # strap A so the regular arrow keys xmit \EA, etc, as with the
9900 # 2645. However, even with this strap set, the terminal stops
9901 # xmitting if you reset it, until you unset and reset the strap!
9902 # Since there is no way to set/unset the strap with an escape
9903 # sequence, we don't use it in the default.
9904 # If you like, you can use 2621-ba (brain-damaged arrow keys).
9905 hp2621-ba|HP 2621 w/new rom and strap A set,
9906 rmkx@, smkx@, use=hp+arrows, use=hp2621,
9908 # hp2621 with function labels. Most of the time they are off,
9909 # but inside vi, the function key labels appear. You have to
9910 # hold down shift to get them to xmit.
9911 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|HP 2621 w/labels,
9912 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
9916 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
9917 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
9918 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
9919 use=hp+pfk+cr, use=hpgeneric,
9921 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
9922 hp2621p|HP 2621 with printer,
9923 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
9925 hp2621p-a|HP 2621p with fn as arrows,
9926 use=hp+pfk+arrows, use=hp2621p,
9928 # hp2621 with k45 keyboard
9929 hp2621-k45|hp2621k45|k45|HP 2621 with 45 keyboard,
9930 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9931 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
9933 # 2621 using all 48 lines of memory, only 24 visible at any time.
9934 hp2621-48|HP 48 line 2621,
9936 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
9939 # 2621 with no labels ever. Also prevents vi delays on escape.
9940 hp2621-nl|HP 2621 with no labels,
9941 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
9944 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
9947 hp2621-nt|HP 2621 w/no tabs,
9950 # Hp 2624 B with 4 or 10 pages of memory.
9952 # Some assumptions are made with this entry. These settings are
9953 # NOT set up by the initialization strings.
9955 # Port Configuration
9960 # Terminal Configuration
9966 # Note: the 2624 DOES have a true <home>, believe it or not!
9968 # The 2624 has an "error line" to which messages can be sent.
9969 # This is CLOSE to what is expected for a "status line". However,
9970 # after a message is sent to the "error line", the next carriage
9971 # return is EATEN and the "error line" is turned back off again!
9972 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
9974 # This entry supports emacs (and any other program that uses raw
9975 # mode) at 4800 baud and less. I couldn't get the padding right
9978 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
9979 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
9982 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
9984 # This hp2626 entry does not use any of the fancy windowing stuff
9987 # Indeed, terminfo does not yet handle such stuff. Since changing
9988 # any window clears memory, it is probably not possible to use
9989 # this for screen opt.
9991 # ed is incredibly slow most of the time - I am guessing at the
9992 # exact padding. Since the terminal uses xoff/xon this is intended
9993 # only for cost computation, so that the terminal will prefer el
9994 # or even dl1 which is probably faster!
9996 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
9997 # extra slow on the last line of the window.
9999 # The padding probably should be changed.
10001 hp2626|hp2626a|hp2626p|HP 2626,
10004 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
10005 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
10006 use=hp+labels, use=scrhp,
10008 # This entry is for sysline. It allocates a 23 line window with
10009 # a 115 line workspace for regular use, and a 1 line window for
10012 # This assumes port 2 is being used.
10013 # Turn off horizontal line, Create ws #1 with 115 lines,
10014 # Create ws #2 with 1 line, Create window #1 lines 1-23,
10015 # Create window #2 lines 24-24, Attach cursor to workspace #1.
10016 # Note that this clears the tabs so it must be done by tset before
10017 # it sets the tabs.
10019 hp2626-s|HP 2626 using only 23 lines,
10022 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
10023 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
10024 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
10025 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
10026 # Force terminal back to 24 lines after being 23.
10027 hp2626-ns|HP 2626 using all 24 lines,
10028 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
10029 \s\E&w3f2I\s\E&w7f2p1I\s\r,
10031 # Various entries useful for small windows on 2626.
10032 hp2626-12|Hewlett-Packard 2626 12 lines,
10033 lines#12, use=hp2626,
10034 hp2626-12x40|Hewlett-Packard 2626 12 lines 40 columns,
10035 cols#40, lines#12, use=hp2626,
10036 hp2626-x40|Hewlett-Packard 2626 40 columns,
10037 cols#40, use=hp2626,
10038 hp2626-12-s|Hewlett-Packard 2626 11 lines plus status,
10039 lines#11, use=hp2626-s,
10042 # hp2627 color tubes from University of Wisconsin
10044 hp2627a-rev|HP 2627 with reverse video colors,
10045 cr=\r, cud1=\n, ht=^I, ind=\n,
10046 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
10048 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
10049 smul=\E&dD\E&v1S, use=hp2621-nl,
10050 hp2627a|HP 2627 color terminal with no labels,
10051 cr=\r, cud1=\n, ht=^I, ind=\n,
10052 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
10053 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
10054 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
10056 hp2627c|HP 2627 color (cyan) terminal with no labels,
10057 cr=\r, cud1=\n, ht=^I, ind=\n,
10058 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
10059 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
10061 # hp2640a doesn't have the Y cursor addressing feature, and C is
10062 # memory relative instead of screen relative, as we need.
10065 cup@, rmkx@, smkx@, use=hp2645,
10067 hp2640b|hp2644a|HP 264x series,
10068 rmkx@, smkx@, use=hp2645,
10070 # (hp2641a: removed unknown :gu: -- esr)
10071 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
10072 am, da, db, mir, xhp,
10074 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10075 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
10076 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
10077 if=/usr/share/tabset/std, il1=\EL, ind=\n,
10078 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
10079 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
10082 # This terminal should be used at 4800 baud or less. It needs padding for
10083 # plain characters at 9600, I guessed at an appropriate cr delay. It really
10084 # wants ^E/^F handshaking, but that doesn't work well even if you write
10085 # software to support it.
10086 hp2645|hp45|HP 2645 series,
10088 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
10089 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
10090 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
10091 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
10093 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
10094 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
10095 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
10096 # You should use this terminal at 4800 baud or less.
10097 hp2648|hp2648a|HP 2648a graphics terminal,
10098 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
10099 dch1=\EP$<7>, ip=$<5>, use=hp2645,
10101 # The HP 150 terminal is a fairly vanilla HP terminal, with the
10102 # clreol standout problem. It also has graphics capabilities and
10103 # a touch screen, which we don't describe here.
10104 hp150|Hewlett Packard Model 150,
10107 # HP 2382a terminals, "the little ones." They don't have any
10108 # alternate character set support and sending out ^N/^O will
10109 # leave the screen blank.
10110 hp2382a|hp2382|Hewlett Packard 2382a,
10114 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
10117 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
10118 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
10119 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
10121 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
10123 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
10124 use=hp+pfk+arrows, use=hp2621-fl,
10126 # newer hewlett packard terminals
10128 newhpkeyboard|generic entry for HP extended keyboard,
10129 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10130 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
10131 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
10132 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
10135 newhp|generic entry for new Hewlett Packard terminals,
10136 am, bw, mir, xhp, xon,
10137 cols#80, lines#24, pb#4800,
10138 acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn
10140 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
10141 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
10142 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
10143 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
10144 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
10145 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
10146 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
10147 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
10148 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
10149 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
10150 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
10151 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
10152 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
10153 tbc=\E3, use=newhpkeyboard,
10155 memhp|memory relative addressing for new HP ttys,
10157 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
10158 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
10159 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
10160 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
10162 scrhp|screen relative addressing for new HP ttys,
10163 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
10164 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
10165 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
10166 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
10167 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
10169 # (hp+labels: added label values from a BRL termcap -- esr)
10170 hp+labels|"standard" label info for new HP ttys,
10171 lh#2, lw#8, nlab#8,
10172 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
10173 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
10175 rmln=\E&j@, smln=\E&jB,
10177 hp+printer|"standard" printer info for HP ttys,
10178 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
10181 # The new hp2621b is kind of a cross between the old 2621 and the
10182 # new 262x series of machines. It has dip-switched options.
10183 # The firmware has a bug in it such that if you give it a null
10184 # length label, the following character is eaten!
10185 hp2621b|HP 2621b with old style keyboard,
10186 lh#1, lm#48, lw#8, nlab#8,
10187 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
10188 kind=\ET, kll=\EF, kri=\ES,
10189 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
10190 %;%p2%s\E%{111}%p1%+%c\r,
10191 smln=\E&jB, use=hp2621,
10193 hp2621b-p|HP 2621b with printer,
10194 use=hp+printer, use=hp2621b,
10196 # hp2621b - new 2621b with new extended keyboard
10197 # these are closer to the new 26xx series than the other 2621b
10198 hp2621b-kx|HP 2621b with extended keyboard,
10199 use=newhpkeyboard, use=hp2621b,
10201 hp2621b-kx-p|HP 2621b with new keyboard & printer,
10202 use=hp+printer, use=hp2621b-kx,
10204 # Some assumptions are made in the following entries.
10205 # These settings are NOT set up by the initialization strings.
10207 # Port Configuration
10208 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
10210 # Terminal Configuration
10211 # InhHndShk(G)=Yes InhDC2(H)=Yes
10212 # XmitFnctn(A)=No InhEolWrp=No
10215 # Hp 2622a & hp2623a display and graphics terminals
10217 hp2622|hp2622a|HP 2622,
10220 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
10222 # The 2623 is a 2622 with extra graphics hardware.
10223 hp2623|hp2623a|HP 2623,
10226 hp2624b-p|hp2624b-4p-p|Hewlett Packard 2624 B with printer,
10227 use=hp+printer, use=hp2624,
10229 # The hewlett packard B can have an optional extra 6 pages of memory.
10230 hp2624-10p|hp2624a-10p|hp2624b-10p|Hewlett Packard 2624 B w/ 10 pages of memory,
10231 lm#240, use=hp2624,
10233 hp2624b-10p-p|Hewlett Packard 2624 B w/ extra memory & printer,
10234 lm#240, use=hp2624b-p,
10236 # Color manipulations for HP terminals
10237 hp+color|HP with colors,
10239 colors#16, ncv#17, pairs#7,
10240 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10241 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10242 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10243 %t1%e.%p7%d%;z%p1%dI,
10244 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10245 I\E&v1b1c6I\E&v1x1y7I,
10246 op=\E&v0S, scp=\E&v%p1%dS,
10248 # <is2> sets the screen to be 80 columns wide
10249 hp2397a|hp2397|Hewlett Packard 2397A color terminal,
10250 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
10252 # HP 700/44 Setup parameters:
10253 # Terminal Mode HP-PCterm
10254 # Inhibit Auto Wrap NO
10255 # Status Line Host Writable
10256 # PC Character Set YES
10257 # Twenty-Five Line Mode YES
10258 # XON/XOFF @128 or 64 (sc)
10259 # Keycode Mode NO or YES (sc)
10260 # Backspace Key BS or BS/DEL
10262 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
10263 # \E\\? does not turn off keycode mode
10264 # <smsc> sets alternate start/stop; keycode on
10265 hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode,
10268 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
10270 bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub1=\E[D,
10271 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10272 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10273 ich1=\E[@, il1=\E[L, ind=\n,
10274 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
10275 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10276 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
10277 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
10278 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
10279 kpp=\E[5~, rmam=\E[?7l,
10280 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
10281 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
10282 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
10283 smul=\E[4m, xoffc=g, xonc=e, use=vt220+cvis,
10285 # (hp2392: copied <rmir> here from hpex -- esr)
10286 hp2392|239x series,
10288 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
10289 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
10290 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
10291 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
10294 hpsub|HP terminals -- capability subset,
10295 am, da, db, mir, xhp, xon,
10297 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10298 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
10299 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
10300 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
10301 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
10302 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
10305 # May be used for most 24 x 80 hp terminals,
10306 # but has no padding added, so may allow runover in some terminals at high
10307 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
10308 # hp98x5 terminal emulators or hp98x6 consoles.
10309 # Adds xy-cursor addressing, vertical cursor addressing, home,
10310 # last line, and underline capabilities.
10312 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
10313 # moved <rmir> here from hpsub -- esr)
10314 hpex|HP extended capabilities,
10315 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
10316 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
10317 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
10319 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
10320 hp2|hpex2|Hewlett-Packard extended capabilities newer version,
10321 am, da, db, mir, xhp,
10322 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
10323 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10324 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10325 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10326 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10327 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10328 knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10329 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10330 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10331 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10332 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
10333 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
10334 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
10335 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
10336 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
10337 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
10338 use=hp+pfk-cr, use=hp+arrows,
10341 # From: <ddavis@ic.berkeley.edu>
10342 hp236|hp236 internal terminal emulator,
10345 clear=\EF, cnorm=\EDE, cub1=^H,
10346 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
10347 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
10348 sgr0=\ECI, smso=\EBI,
10350 # This works on a hp300 console running Utah 4.3 BSD
10351 # From: Craig Leres <leres@okeeffe.berkeley.edu>
10352 hp300h|HP Catseye console,
10353 OTbs, am, da, db, mir, xhp,
10354 cols#128, lines#51, lm#0, xmc#0,
10355 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
10356 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10357 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10358 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
10359 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
10360 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
10361 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
10363 # From: Greg Couch <gregc@ernie.berkeley.edu>
10364 hp9837|hp98720|hp98721|HP 9000/300 workstations,
10365 OTbs, am, da, db, mir, xhp,
10366 cols#128, it#8, lines#46, lm#0,
10367 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
10368 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
10369 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10370 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
10371 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
10372 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
10373 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
10374 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
10375 tbc=\E3, vpa=\E&a%p1%dY,
10376 # HP 9845 desktop computer from BRL
10377 # (hp9845: removed unknown capability :gu: -- esr)
10379 OTbs, am, da, db, eo, mir, xhp,
10381 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
10382 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
10383 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
10384 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
10385 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
10386 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
10387 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
10388 hp98550|hp98550a|HP 9000 Series 300 color console,
10389 OTbs, am, da, db, mir, xhp,
10390 cols#128, it#8, lines#49, lm#0,
10391 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
10392 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10393 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
10394 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
10395 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
10396 kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10397 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10398 kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER,
10399 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N,
10400 smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10401 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
10403 # From: Martin Trusler
10404 hp98550-color|hp98550a-color|HP 9000 Series 300 color console (Trusler),
10405 OTbs, am, ccc, da, db, km, mir, xhp,
10406 colors#8, cols#128, it#8, lh#2, lines#49, lm#0, lw#8, nlab#8,
10408 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+
10409 u+v+w+x|y<z>{*|!}\273~\362,
10410 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H,
10411 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10412 dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\E&a0y0C,
10413 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\ES,
10414 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
10415 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
10416 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
10417 %t1%e.%p7%d%;z%p1%dI,
10418 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ,
10419 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU,
10420 kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
10421 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
10422 I\E&v1b1c6I\E&v1x1y7I,
10423 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
10424 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
10425 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
10426 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
10427 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A,
10428 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE,
10430 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%{64}%+%c%?%p9%t%'
10431 \016'%c%e%'\017'%c%;,
10432 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A,
10433 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB,
10434 smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea,
10435 u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY,
10436 use=hp+pfk-cr, use=hp+arrows,
10438 # From: Victor Duchovni <vic@fine.princeton.edu>
10439 # (hp700-wy: removed obsolete ":nl=^J:";
10440 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
10441 hp700-wy|HP 700/41 emulating Wyse30,
10442 OTbs, am, bw, mir, msgr,
10443 cols#80, it#8, lines#24, xmc#1,
10444 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10445 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10446 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
10447 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
10448 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
10449 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
10450 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
10451 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
10452 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
10453 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
10454 hp70092|hp70092a|hp70092A|HP 700/92,
10456 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
10457 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
10458 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
10459 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
10460 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
10461 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP,
10462 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL,
10463 kll=\EF, knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dB,
10464 ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@,
10465 rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ,
10466 smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
10467 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows,
10469 bobcat|sbobcat|HP 9000 model 300 console,
10470 am, da, db, mir, xhp,
10471 cols#128, it#8, lines#47, xmc#0,
10472 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
10473 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
10474 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
10475 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10476 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
10477 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
10478 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
10479 gator-t|HP 9000 model 237 emulating extra-tall AAA,
10480 lines#94, use=gator,
10481 gator|HP 9000 model 237 emulating AAA,
10483 cols#128, it#8, lines#47,
10484 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
10485 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
10486 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
10487 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
10488 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
10489 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
10490 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
10491 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10492 gator-52|HP 9000 model 237 emulating VT52,
10493 cols#128, lines#47, use=vt52-basic,
10494 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
10495 lines#94, use=gator-52,
10497 #### Honeywell-Bull
10499 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
10502 # Honeywell Bull terminal. Its cursor and function keys send single
10503 # control characters and it has standout/underline glitch. Most programs
10504 # do not like these features/bugs. Visual bell is realized by flashing the
10505 # "keyboard locked" LED.
10506 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
10508 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
10509 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
10510 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
10511 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
10512 dku7003|Honeywell Bull DKU 7003 all features described,
10515 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
10516 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10519 #### Lear-Siegler (LSI adm)
10521 # These guys are long since out of the terminals business, but
10522 # in 1995 many current terminals still have an adm type as one of their
10523 # emulations (usually their stupidest, and usually labeled adm3, though
10524 # these `adm3' emulations normally have adm3a+ capabilities).
10526 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
10527 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
10528 # was being held to ground would trigger a send of the top line on the screen.
10529 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
10530 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
10531 # for clearing up this point.)
10533 adm1a|adm1|LSI adm1a,
10536 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10537 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
10542 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10543 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10544 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
10545 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10546 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
10550 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
10551 # The following ADM-3A switch settings are assumed for normal operation:
10552 # SPACE U/L_DISP CLR_SCRN 24_LINE
10553 # CUR_CTL LC_EN AUTO_NL FDX
10554 # Other switches may be set for operator convenience or communication
10555 # requirements. I recommend
10556 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
10558 # Most of these terminals required an option ROM to support lower case display.
10559 # Open the case and look at the motherboard; if you see an open 24-pin DIP
10560 # socket, you may be out of luck.
10562 # (adm3a: some capabilities merged in from BRl entry -- esr)
10566 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
10567 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10568 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
10572 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
10575 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
10576 rmso=\EG, smso=\EG, use=adm3a+,
10577 # A lot of terminals other than adm11s use these. Wherever you see
10578 # use=adm+sgr with some of its capabilities disabled, try the
10579 # disabled ones. They may well work but not have been documented or
10580 # expressed in the using entry. We'd like to cook up an <sgr> but the
10581 # <rmacs>/<smacs> sequences of the using entries vary too much.
10582 adm+sgr|adm style highlight capabilities,
10583 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
10584 smso=\EG4, smul=\EG8,
10585 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
10586 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
10587 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
10588 # be ^Z, according to his entry.
10589 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
10590 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
10593 OTkn#8, cols#80, lines#24,
10594 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
10595 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10596 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
10597 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10598 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10599 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
10601 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
10602 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
10603 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
10604 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
10605 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
10606 # via BRL. That entry asserted <xmc#1>, but I've left that out because
10607 # neither earlier nor later ADMSs have it -- esr)
10609 # You will need to get into the supervisor setup before you can set
10610 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
10611 # see a lot more setup options.
10613 # While in supervisor setup you can also use following codes:
10615 # Ctrl-P Personality character selections (configure for example what
10616 # arrow keys send, if I recall correctly)
10617 # Ctrl-T tabs 1-80 use left&right to move and up to set and
10618 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
10619 # Ctrl-B Binary setup (probably not needed. I think that everything can
10620 # be set using normal setup)
10621 # Ctrl-A Answerback mode (enter answerback message)
10622 # Ctrl-U User friendly mode (normal setup)
10623 # Ctrl-D Defaults entire setup and function keys from EPROM tables
10624 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
10625 # Ctrl-R Reads both setup and functions keys from NVM.
10626 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
10628 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
10629 # RTS/CTS used nowadays with virtually every modem and computer. 19200
10630 # bps works fine with hardware flow control.
10632 # The following null-modem cable should fix this and enable you to use
10633 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
10634 # set ADM-12+ for DTR handshaking from supervisor setup.
10636 # PC Serial ADM-12+
10647 OTbs, OTpt, am, mir,
10648 OTug#1, cols#80, it#8, lines#24,
10649 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10650 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10651 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
10652 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
10653 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
10654 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
10655 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10656 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10657 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
10659 # (adm20: removed obsolete ":kn#7:" -- esr)
10660 adm20|Lear Siegler adm20,
10662 cols#80, it#8, lines#24,
10663 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
10664 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
10665 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
10666 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
10667 sgr0=\E(, smso=\E),
10668 adm21|Lear Siegler adm21,
10670 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
10671 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
10672 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
10673 use=adm+sgr, use=adm3a,
10674 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
10675 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
10676 # removed bogus-looking \200 from before <cup>. -- esr)
10680 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10681 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10682 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
10683 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
10685 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
10686 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10687 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10688 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
10689 # ADM 31 DIP Switches
10691 # This information comes from two versions of the manual for the
10692 # Lear-Siegler ADM 31.
10696 # +-||||-------------------------------------+
10711 # +----------------------------------------------+
10712 # front of case (keyboard)
10714 # S1 - Data Rate - Modem
10715 # S2 - Data Rate - Printer
10716 # ------------------------
10717 # Data Rate Setting
10718 # -------------------
10736 # S3 - Interface/Printer/Attributes
10737 # ---------------------------------
10738 # Printer Busy Control
10741 # off off off Busy not active, CD disabled
10742 # off off on Busy not active, CD enabled
10743 # off on off Busy active on J5-20, CD disabled
10744 # on off off Busy active on J5-19, CD disabled - Factory Set.
10745 # on off on Busy active on J5-19, CD enabled
10747 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
10749 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
10751 # sw6 ON enables printer BUSY active LOW - Factory Setting
10752 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
10754 # sw7 ON - steady cursor - Factory Setting
10755 # OFF - blinking cursor
10757 # sw8 ON causes selected attribute character to be displayed
10758 # OFF causes SPACE to be displayed instead - Factory Setting
10764 # sw4 sw1 sw2 sw3 sw4
10765 # ---------------------------
10766 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
10767 # Current Loop disabled - Factory Setting
10768 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
10770 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
10771 # Current Loop Disabled
10773 # sw5 ON disables dot stretching mode - Factory Setting
10774 # OFF enables dot stretching mode
10775 # sw6 ON enables blanking function
10776 # OFF enables underline function - Factory Setting
10777 # sw7 ON causes NULLS to be displayed as NULLS
10778 # OFF causes NULLS to be displayed as SPACES - Factory Setting
10780 # S5 - Word Structure
10781 # -------------------
10782 # sw1 ON enables BREAK key - Factory Setting
10783 # OFF disables BREAK key
10784 # sw2 ON selects 50Hz monitor refresh rate
10785 # OFF selects 60Hz monitor refresh rate - Factory Setting
10787 # Modem Port Selection
10790 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
10791 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
10792 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
10793 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
10794 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
10795 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
10796 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
10797 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
10799 # sw6 ON sends bit 8 a 1 (mark)
10800 # OFF sends bit 8 as 0 (space) - Factory Setting
10801 # sw7 ON selects Block Mode
10802 # OFF selects Conversation Mode - Factory Setting
10803 # sw8 ON selects Full Duplex operation
10804 # OFF selects Half Duplex operation - Factory Setting
10808 # sw1, sw2, sw6, sw7 Reserved - Factory 0
10810 # Printer Port Selection
10811 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
10813 # sw8 ON enables Printer Port
10814 # OFF disables Printer Port - Factory Setting
10816 # S7 - Polling Address
10817 # --------------------
10818 # sw1-7 Establish ASCII character which designates terminal polling address
10820 # OFF = logic 1 - Factory Setting
10821 # sw8 ON enables Polling Option
10822 # OFF disables Polling Option - Factory Setting
10825 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
10827 # This adm31 entry uses underline as the standout mode.
10828 # If the adm31 gives you trouble with standout mode, check the DIP switch in
10829 # position 6, bank @c11, 25% from back end of the circuit board. Should be
10830 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
10831 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
10832 adm31|LSI adm31 with sw6 set for underline mode,
10835 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10836 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10837 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
10838 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10839 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10840 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
10841 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
10842 adm31-old|o31|old adm31,
10843 rmul@, smso=\EG4, smul@, use=adm31,
10844 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
10848 if=/usr/share/tabset/vt100,
10849 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
10850 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
10854 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10855 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10856 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
10857 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
10858 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
10859 smir=\Eq, smul@, use=adm+sgr,
10860 # The following termcap for the Lear Siegler ADM-42 leaves the
10861 # "system line" at the bottom of the screen blank (for those who
10862 # find it distracting otherwise)
10863 adm42-ns|LSI adm-42 with no system line,
10864 cbt=\EI\EF \011, clear=\E;\EF \011,
10865 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
10866 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
10867 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
10868 smir=\Eq\EF \011, use=adm42,
10869 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
10870 # The insert mode of this terminal is commented out because it's broken for our
10871 # purposes in that it will shift the position of every character on the page,
10872 # not just the cursor line!
10873 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
10874 adm1178|1178|LSI adm1178,
10876 cols#80, lines#24, xmc#1,
10877 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
10878 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10879 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
10880 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
10881 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
10882 sgr0=\E), smso=\EG4, smul=\EG1,
10886 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
10887 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
10888 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
10890 # ComputerVision Services
10891 # 500 Old Connecticut Path
10892 # Framingham, Mass.
10895 # Standout mode is dim reverse-video.
10896 pt100|pt200|wren|fenix|Prime pt100/pt200,
10898 cols#80, it#8, lines#24,
10899 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
10900 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
10901 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
10902 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
10903 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
10904 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
10905 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
10906 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
10908 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
10910 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
10911 pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode,
10913 cup=\E[%i%p1%d;%p2%dH, use=pt100,
10915 rmso@, smso@, use=pt100,
10916 pt250w|Prime PT250 in 132-column mode,
10917 rmso@, smso@, use=pt100w,
10922 # 3475-A North 1st Street
10923 # San Jose CA 95134
10924 # Vox: (800)-457-4447
10925 # Fax: (408)-473-1510
10926 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
10928 # Qume was bought by Wyse, but still (as of early 1995) has its own support
10929 # group and production division.
10931 # Discontinued Qume models:
10933 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
10934 # built to replace them, and a qvt119+ which was a 101+ with available wide
10935 # mode (132 columns). There was a qvt103 which added VT100/VT131 emulations
10936 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
10937 # ANSI-compatible terminals with the qvt323 and qvt61.
10939 # Current Qume models (as of February 1995):
10941 # All current Qume terminals have ANSI-compatible operation modes.
10942 # Qume is still producing the qvt62, which features emulations for other
10943 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
10944 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
10945 # with many emulations including Wyse370, Wyse 325, etc. Their newest
10946 # model is the qvt520, which is VT420-compatible.
10948 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
10950 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
10951 # setup mode. Shift-s should be a configuration save to NVRAM.
10953 qvt101|qvt108|Qume qvt 101 and QVT 108,
10954 xmc#1, use=qvt101+,
10956 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
10957 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
10958 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
10959 # What seems to be going on here is that this entry was designed so that
10960 # the normal highlight is bold and standout is dim plus something else
10961 # (reverse-video maybe? But then, are there two <rev> sequences?)
10963 # Added kdch1, kil1, kdl1 based on screenshot -TD:
10964 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
10965 qvt101+|qvt101p|Qume qvt 101 PLUS product,
10967 cols#80, lines#24, xmc#0,
10968 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
10969 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10970 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10971 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10972 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
10973 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10974 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
10975 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10976 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
10977 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
10978 qvt102|Qume qvt 102,
10979 cnorm=\E., use=qvt101,
10980 # (qvt103: added <rmam>/<smam> based on init string -- esr)
10981 qvt103|Qume qvt 103,
10983 cols#80, it#8, lines#24, vt#3,
10984 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10985 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
10986 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
10987 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
10988 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
10989 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
10990 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10991 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
10992 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
10993 rmso=\E[m$<2>, rmul=\E[m$<2>,
10994 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
10995 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
10997 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
10998 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10999 qvt103-w|Qume qvt103 132 cols,
11000 cols#132, lines#24,
11001 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
11002 qvt119+|qvt119p|qvt119|Qume qvt 119 and 119PLUS terminals,
11004 cols#80, lines#24, xmc#0,
11005 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
11006 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
11007 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
11008 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
11009 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
11010 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
11011 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11012 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11013 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
11014 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
11015 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
11016 lines#25, use=qvt119+,
11017 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
11019 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
11020 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
11021 lines#25, use=qvt119+,
11022 qvt203|qvt203+|Qume qvt 203 Plus,
11023 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
11024 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
11025 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
11026 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
11027 qvt203-w|qvt203-w-am|Qume qvt 203 PLUS in 132 cols (w/advanced video),
11028 cols#132, lines#24,
11029 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
11031 # Since a command is present for enabling 25 data lines,
11032 # a specific terminfo entry may be generated for the 203.
11033 # If one is desired for the QVT 119 PLUS then 25 lines must
11034 # be selected in the status line (setup line 9).
11036 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
11038 is2=\E[=40h\E[?3l, use=qvt203,
11039 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
11040 cols#132, lines#25,
11041 rs2=\E[?3h\E[=40h, use=qvt203,
11043 #### TeleVideo (tvi)
11046 # 550 East Brokaw Road
11047 # PO Box 49048 95161
11048 # San Jose CA 95112
11049 # Vox: (408)-954-8333
11050 # Fax: (408)-954-0623
11053 # These require incredible amounts of padding.
11055 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
11056 # TeleVideo terminals are ANSI and PC-ANSI compatible.
11058 tvi803|TeleVideo 803,
11059 clear=\E*$<10>, use=tvi950,
11061 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
11062 # Switch settings are:
11083 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
11099 # U do CR/LF when CR received
11100 # D do CR when CR received
11122 # S2 6 Cursor down key
11126 # S2 7 Screen colour
11130 # S2 8 DSR status (pin 6)
11134 # S2 9 DCD status (pin 8)
11138 # S2 10 DTR status (pin 20)
11141 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
11142 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
11143 tvi910|TeleVideo model 910,
11145 cols#80, it#8, lines#24, xmc#1,
11146 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11147 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
11148 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
11149 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
11150 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
11151 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11152 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11153 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
11154 # From: Alan R. Rogers <rogers%albany@csnet-relay>
11155 # as subsequently hacked over by someone at SCO
11156 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
11158 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
11161 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
11162 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
11163 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
11164 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
11167 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
11168 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
11169 # D U D D 8O1 D U U U 8E2
11171 # S1 9 Autowrap (U = on, D = off)
11172 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
11173 # S2 1 Mode (U = block, D = conversational)
11174 # S2 2 Duplex (U = half, D = full)
11175 # S2 3 Hertz (U = 50, D = 60)
11176 # S2 4 Edit mode (U = local, D = duplex)
11177 # S2 5 Cursor type (U = underline, D = block)
11178 # S2 6 Cursor down key (U = send ^J, D = send ^V)
11179 # S2 7 Screen colour (U = green on black, D = black on green)
11180 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
11181 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
11182 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
11184 tvi910+|TeleVideo 910+,
11185 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
11186 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
11187 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
11188 ll=\E=7\s, use=tvi910,
11190 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
11191 # <khome> from BRL entry -- esr)
11192 tvi912|tvi914|tvi920|TeleVideo 912/914/920 (old),
11193 OTbs, OTpt, am, msgr,
11194 cols#80, it#8, lines#24, xmc#1,
11195 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11196 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11197 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
11198 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
11199 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11200 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11201 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11202 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
11204 # We got some new tvi912c terminals that act really weird on the regular
11205 # termcap, so one of our gurus worked this up. Seems that cursor
11206 # addressing is broken.
11207 tvi912cc|tvi912 at Cowell College,
11210 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
11211 # From: Benjamin C. W. Sittler
11213 # Someone has put a scanned copy of the manual online at:
11214 # http://vt100.net/televideo/912b-om/
11215 # (https://vt100.net/manx/details/6,5484)
11217 # These terminals were produced ca. 1979, and had a 12" monochrome
11218 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
11219 # ASCII, and were generally similar to adm3a but with attributes
11220 # (including some with magic cookies), fancy half-duplex mode, and
11223 # Some operations require truly incredible amounts of padding. The
11224 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
11225 # are so slow as to be nearly unusable.
11227 # There may or may not have been a separate, earlier series of 912/920
11228 # terminals (without the "B" and "C" suffix); I have never seen one,
11229 # and the manual only describes the "B" and "C" series. The 912 and 920
11230 # are quite distinct from the 914 and 924, which were much nicer non-
11231 # magic-cookie terminals similar to the 950.
11233 # This is a new description for the following TeleVideo terminals,
11234 # distinguished chiefly by their keyboards:
11236 # TVI-912B - very odd layout, no function keys (84 keys)
11237 # TVI-920B - typewriter layout, no function keys (103 keys)
11238 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
11239 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
11241 # To choose a setting for the TERM variable, start with the model:
11243 # Model || base name
11244 # ----------||-----------
11245 # TVI-912B || tvi912b
11246 # TVI-912C || tvi912c
11247 # TVI-920B || tvi920b
11248 # TVI-920C || tvi920c
11250 # Then add a suffix from the following table describing installed options
11251 # and how you'd like to use the terminal:
11253 # Use Video | Second | Visual | Magic | Page || feature
11254 # Attributes | Page | Bell | Cookies | Print || suffix
11255 # ------------|--------|--------|---------|-------||---------
11256 # No | No | N/A | N/A | No || -unk
11257 # No | No | N/A | N/A | Yes || -p
11258 # No | Yes | No | N/A | No || -2p-unk
11259 # No | Yes | No | N/A | Yes || -2p-p
11260 # No | Yes | Yes | N/A | No || -vb-unk
11261 # No | Yes | Yes | N/A | Yes || -vb-p
11262 # Yes | No | N/A | No | N/A ||
11263 # Yes | No | N/A | Yes | N/A || -mc
11264 # Yes | Yes | No | No | N/A || -2p
11265 # Yes | Yes | No | Yes | N/A || -2p-mc
11266 # Yes | Yes | Yes | No | N/A || -vb
11267 # Yes | Yes | Yes | Yes | N/A || -vb-mc
11269 # So e.g. a model 920 C with second page memory option, visual bell
11270 # and no magic cookies would be tvi920c-vb; a model 912 B without the
11271 # second page memory option and using magic cookies would be
11276 # At 9600 baud, the terminal is prone to overflow its input buffer
11277 # during complex operations (insert/delete
11278 # character/line/screen/page), and it does not signal this over the
11279 # RS232 cable. The typical symptom of an overrun is that the terminal
11280 # starts beeping, and output becomes garbled.
11282 # The padding delays in this terminfo were derived using tack(1)
11283 # running on a Linux box connected to a TVI-920C with a later-model
11284 # (A49C1-style) ROM running at 9600 baud, so your mileage may
11285 # vary. The numbers below seem to give the terminal enough time so
11286 # that it doesn't overflow its input buffer and start losing
11291 # If you want to use the FUNCT key on a tvi912[bc], use the
11292 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
11293 # the following table (these also work on the 920 series):
11295 # Unshifted Function Keys:
11297 # Key | capname|| Equivalent
11298 # -----|--------||------------
11299 # F1 | <kf1> || FUNCT + @
11300 # F2 | <kf2> || FUNCT + A
11301 # F3 | <kf3> || FUNCT + B
11302 # F4 | <kf4> || FUNCT + C
11303 # F5 | <kf5> || FUNCT + D
11304 # F6 | <kf6> || FUNCT + E
11305 # F7 | <kf7> || FUNCT + F
11306 # F8 | <kf8> || FUNCT + G
11307 # F9 | <kf9> || FUNCT + H
11308 # F10 | <kf10> || FUNCT + I
11309 # F11 | <kf11> || FUNCT + J
11311 # Shifted Function Keys:
11313 # SHIFT + Key | capname|| Equivalent
11314 # -------------|--------||------------
11315 # SHIFT + F1 | <kf12> || FUNCT + `
11316 # SHIFT + F2 | <kf13> || FUNCT + a
11317 # SHIFT + F3 | <kf14> || FUNCT + b
11318 # SHIFT + F4 | <kf15> || FUNCT + c
11319 # SHIFT + F5 | <kf16> || FUNCT + d
11320 # SHIFT + F6 | <kf17> || FUNCT + e
11321 # SHIFT + F7 | <kf18> || FUNCT + f
11322 # SHIFT + F8 | <kf19> || FUNCT + g
11323 # SHIFT + F9 | <kf20> || FUNCT + h
11324 # SHIFT + F10 | <kf21> || FUNCT + i
11325 # SHIFT + F11 | <kf22> || FUNCT + j
11327 # PORTS AND SWITCH SETTINGS
11329 # Here are the switch settings for the TVI-912B/TVI-920B and
11330 # TVI-912C/TVI-920C:
11332 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
11333 # 2: 9600 3: 4800 4: 2400 5: 1200
11334 # 6: 600 7: 300 8: 150 9: 75
11337 # S2 UART/Terminal options:
11339 # 1: Not used Not allowed
11340 # 2: Alternate character set Standard character set
11341 # 3: Full duplex Half duplex
11342 # 4: 50 Hz refresh 60 Hz refresh
11343 # 5: No parity Send parity
11344 # 6: 2 stop bits 1 stop bit
11345 # 7: 8 data bits 7 data bits
11346 # 8: Not used Not allowed on Rev E or lower
11347 # 9: Even parity Odd parity
11348 # 10: Steady cursor Blinking cursor
11349 # (On Rev E or lower, use W25 instead of switch 10.)
11351 # S5 UART/Terminal options:
11353 # 1: P3-6 Not connected DSR received on P3-6
11354 # 2: P3-8 Not connected DCD received on P3-8
11356 # 3 Open, 4 Open: P3-20 Not connected
11357 # 3 Open, 4 Closed: DTR on when terminal is on
11358 # 3 Closed, 4 Open: DTR is connected to RTS
11359 # 3 Closed, 4 Closed: Not allowed
11361 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
11362 # all data transmitted out of the modem port (P3) will also be
11363 # transmitted out of the printer port (P4).
11365 # 6 Open, 7 Open: Not allowed
11366 # 6 Open, 7 Closed: 20ma current loop input
11367 # 6 Closed, 7 Open: RS232 input
11368 # 6 Closed, 7 Closed: Not allowed
11371 # If the jumper is installed, the effect will occur (the next time the terminal
11374 # S4/W31: Enables automatic LF upon receipt of CR from
11375 # remote or keyboard.
11376 # S4/W32: Enables transmission of EOT at the end of Send. If not
11377 # installed, a carriage return is sent.
11378 # S4/W33: Disables automatic carriage return in column 80.
11379 # S4/W34: Selects Page Print Mode as initial condition. If not
11380 # installed, Extension Mode is selected.
11382 # NON-STANDARD CAPABILITIES
11384 # Sending <u9> or <u7> returns a cursor position report in the format
11385 # YX\r, where Y and X are as in <cup>. This format is described in
11386 # <u8> and <u6>, but it's not clear how one should write an
11387 # appropriate scanf string, since we need to subtract %' ' from the
11388 # character after reading it. The <u9> capability is used by tack(1)
11389 # to synchronize during padding tests, and seems to work for that
11392 # This description also includes the obsolete termcap capabilities
11393 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
11395 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
11397 # The FUNCT modifier actually works with every normal key by sending
11398 # ^AX\r, where X is the sequence normally sent by that key. This is a
11399 # sort of meta key not currently describable in terminfo.
11401 # There are quite a few other keys (especially on the 920 models,) but
11402 # they are for the most part only useful in block mode.
11404 # These terminals have lots of forms manipulation features, mainly
11405 # useful in block mode, including "clear X to nulls" (vs. "clear X to
11406 # spaces"; nulls are sentinels for "send X" operations); "send X"
11407 # operations for uploading all or part of the screen; and block-mode
11408 # editing keys (they don't send escape sequences, but manipulate video
11409 # memory directly). Block mode is used for local editing, and protect
11410 # mode (in conjunction with the "write protect" attribute,
11411 # a.k.a. half-intensity outside of protect mode) is used to control
11412 # which parts of the screen are edited/sent/printed (by <mc0>).
11414 # There are at least two major families of ROM, "early" and
11415 # A49B1/A49C1; the major difference seems to be that the latter ROMs
11416 # support a few extra escape sequences for manipulating the off-screen
11417 # memory page, and for sending whole pages back to the host (mainly
11418 # useful in block mode.) The descriptions in this file don't use any
11419 # of those sequences: set cursor position including page (\E-PYX,
11420 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
11421 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
11422 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
11423 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
11424 # are as in <cup>, and some "send page" features mainly useful for
11425 # forms manipulation.
11427 # The keyboard enable (\E") and disable (\E#) sequences are unused,
11428 # except that a terminal reset (<is2>) enables the keyboard.
11430 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
11431 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
11435 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
11436 # sequences (I infer that in some TeleVideo terminal they may invert
11437 # and uninvert the display) so the <flash> sequence given here is a
11438 # cheesy page-flip instead.
11440 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
11441 # tack(1), so it is not included in the descriptions below.
11443 # It's not clear whether auto_left_margin (<bw>) flag should be set
11444 # for these terminals; tack says yes, so it is set here, but this
11445 # differs from other descriptions I've seen.
11447 # Extension print mode (<mc5>) echoes all characters to the printer
11448 # port [in addition to displaying them] except for the page print mode
11449 # sequence (<mc4>); this is a slight violation of the terminfo
11450 # definition for <mc5> but I don't expect it to cause problems. We
11451 # reset to page print mode in <rs1> since it may have been enabled
11454 # The descriptions with plus signs (+) are building blocks.
11456 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
11457 OTbs, OTpt, am, bw,
11458 cols#80, it#8, lines#24,
11459 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11460 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
11461 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
11462 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
11463 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
11464 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
11465 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
11466 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
11467 u7=\E?, u8=%c%c\r, u9=\E?,
11469 # This isn't included in the basic capabilities because it is
11470 # typically unusable in combination with the full range of video
11471 # attributes, since the magic cookie attributes turn into ASCII
11472 # control characters, and the half-intensity ("protected") attribute
11473 # converts all affected characters to spaces.
11475 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
11478 # This uses half-intensity mode (<dim>) for standout (<smso>), and
11479 # exposes no other attributes (half-intensity is the only attribute
11480 # that does not generate a magic cookie.)
11482 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
11484 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
11487 # Full magic-cookie attribute support, with half-intensity reverse
11488 # video for standout. Note that we add a space in the <dim> sequence
11489 # to give a consistent magic-cookie count. Also note that <sgr> uses
11490 # backspacing (in the TVI-supported order) to apply all requested
11491 # attributes with only a single magic cookie.
11493 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
11495 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
11497 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
11498 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
11499 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
11501 # This uses the second page memory option to save & restore screen
11502 # contents. If your terminal is missing the option, this description
11503 # should still work, but that has not been tested.
11505 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
11506 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
11507 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
11509 # This simulates flashing by briefly toggling to the other page
11512 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
11513 bel=\EK$<100>\EK, use=tvi912b+2p,
11515 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
11517 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
11518 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
11519 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
11520 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
11521 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11522 kf8=^AG\r, kf9=^AH\r,
11524 # Combinations of the basic building blocks
11526 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
11527 use=tvi912b+2p, use=tvi912b-unk,
11529 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
11530 use=tvi912b+vb, use=tvi912b-unk,
11532 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
11533 use=tvi912b+printer, use=tvi912b-unk,
11535 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
11536 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
11538 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
11539 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
11541 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
11542 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
11544 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
11545 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
11547 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
11548 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
11550 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
11551 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
11553 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
11554 use=tvi912b+dim, use=tvi912b-unk,
11556 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
11557 use=tvi912b+mc, use=tvi912b-unk,
11559 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
11560 use=tvi920b+fn, use=tvi912b-unk,
11562 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
11563 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
11565 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
11566 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
11568 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
11569 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
11571 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
11572 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
11575 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
11576 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
11579 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
11580 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
11583 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
11584 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
11587 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
11588 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
11591 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
11592 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
11595 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
11596 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
11598 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
11599 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
11601 # TeleVideo 921 and variants
11602 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
11603 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
11604 # also added empty <acsc> to suppress tic warning -- esr)
11605 tvi921|TeleVideo model 921 with sysline same as page & real vi function,
11606 OTbs, OTpt, am, hs, xenl, xhp,
11607 cols#80, lines#24, xmc#0,
11608 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11609 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11610 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11611 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
11612 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
11613 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
11614 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
11615 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
11616 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
11617 # without the beeper
11618 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
11619 # also added empty <acsc> to suppress tic warning -- esr)
11620 tvi92B|TeleVideo model 921 with sysline same as page & real vi function & no beeper,
11622 cols#80, lines#24, xmc#0,
11623 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
11624 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
11625 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
11626 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
11627 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11628 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
11629 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11630 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
11631 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
11632 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
11633 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
11634 dl1=\ER$<2*/>, il1=\EE$<2*/>,
11635 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
11636 kil1=\EE$<2*/>, use=tvi92B,
11638 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
11639 # in from a BSD termcap file because it looks like they do something the
11640 # old ones skip -- esr)
11641 tvi924|TeleVideo tvi924,
11642 am, bw, hs, in, mir, msgr, xenl, xon,
11643 cols#80, it#8, lines#24, wsl#80, xmc#0,
11644 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
11645 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
11646 cub1=^H, cud1=^V, cuf1=^L,
11647 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
11648 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
11649 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
11650 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
11651 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
11652 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11653 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
11654 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
11655 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
11656 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
11657 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
11658 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
11659 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
11662 # TVI925 DIP switches. In each of these, D = Down and U = Up,
11664 # Here are the settings for the external (baud) switches (S1):
11667 # 7 8 9 10 [Printer]
11668 # 1 2 3 4 [Main RS232]
11669 # -----------------------------------------------------
11688 # Settings for word length and stop-bits (S1)
11690 # Position Description
11692 # ---------------------------
11699 # S2 (external) settings
11701 # Position Up Dn Description
11702 # --------------------------------------------
11704 # X Duplex edit (transmit editing keys)
11705 # --------------------------------------------
11706 # 2 X 912/920 emulation
11708 # --------------------------------------------
11712 # --------------------------------------------
11716 # --------------------------------------------
11720 # --------------------------------------------
11724 # --------------------------------------------
11728 # --------------------------------------------
11729 # 6 X White on black display
11730 # X Black on white display
11731 # --------------------------------------------
11734 # --------------------------------------------
11737 # --------------------------------------------
11740 # --------------------------------------------
11743 # --------------------------------------------
11744 # 10 X CR/LF (Auto LF)
11747 # S3 (internal switch) settings:
11749 # Position Up Dn Description
11750 # --------------------------------------------
11753 # --------------------------------------------
11756 # --------------------------------------------
11759 # --------------------------------------------
11762 # --------------------------------------------
11765 # --------------------------------------------
11766 # 4 X Blinking block cursor
11768 # --------------------------------------------
11769 # 4 X Blinking underline cursor
11771 # --------------------------------------------
11772 # 4 X Steady block cursor
11774 # --------------------------------------------
11775 # 4 X Steady underline cursor
11777 # --------------------------------------------
11778 # 6 X Screen blanking timer (ON)
11779 # X Screen blanking timer (OFF)
11780 # --------------------------------------------
11781 # 7 X Page attributes
11782 # X Line attributes
11783 # --------------------------------------------
11784 # 8 X DCD disconnected
11786 # --------------------------------------------
11787 # 9 X DSR disconnected
11789 # --------------------------------------------
11790 # 10 X DTR Disconnected
11792 # --------------------------------------------
11794 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
11795 tvi925|TeleVideo 925,
11796 OTbs, am, bw, hs, ul,
11797 cols#80, lines#24, xmc#1,
11798 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
11799 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11800 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
11801 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
11802 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
11803 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11804 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
11805 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
11806 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
11807 tsl=\Eh\Ef, use=adm+sgr,
11808 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
11809 # to avoid "magic cookie" standout glitch:
11810 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
11812 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
11814 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
11815 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
11816 # for additional capabilities,
11817 # The following tvi descriptions from B:pjphar and virus!mike
11818 # is for all 950s. It sets the following attributes:
11819 # full duplex (\EDF) write protect off (\E()
11820 # conversation mode (\EC) graphics mode off (\E%)
11821 # white on black (\Ed) auto page flip off (\Ew)
11822 # turn off status line (\Eg) clear status line (\Ef\r)
11823 # normal video (\E0) monitor mode off (\EX or \Eu)
11824 # edit mode (\Er) load blank char to space (\Ee\040)
11825 # line edit mode (\EO) enable buffer control (^O)
11826 # protect mode off (\E\047) duplex edit keys (\El)
11827 # program unshifted send key to send line all (\E016)
11828 # program shifted send key to send line unprotected (\E004)
11829 # set the following to nulls:
11830 # field delimiter (\Ex0\200\200)
11831 # line delimiter (\Ex1\200\200)
11832 # start-protected field delimiter (\Ex2\200\200)
11833 # end-protected field delimiter (\Ex3\200\200)
11834 # set end of text delimiter to carriage return/null (\Ex4\r\200)
11836 # TVI 950 Switch Setting Reference Charts
11840 # S1 1 2 3 4 5 6 7 8 9 10
11841 # +-----------------------+-----+-----+-----------------------+
11842 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
11843 # | |Bits |Bits | |
11844 # +------+-----------------------+-----+-----+-----------------------+
11845 # | Up | See | 7 | 2 | See |
11846 # +------+-----------------------+-----+-----+-----------------------+
11847 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
11848 # +------+-----------------------+-----+-----+-----------------------+
11851 # S2 1 2 3 4 5 6 7 8 9 10
11852 # +-----+-----+-----------------+-----+-----------+-----+-----+
11853 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
11854 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11855 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
11856 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11857 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
11858 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
11862 # +-----------+-----+-----+-----+-----+-----------+
11863 # | Display | 1 | 2 | 3 | 4 | Baud |
11864 # +-----------+-----+-----+-----+-----+ |
11865 # | Printer | 7 | 8 | 9 | 10 | Rate |
11866 # +-----------+-----+-----+-----+-----+-----------+
11867 # | D | D | D | D | 9600 |
11868 # | U | D | D | D | 50 |
11869 # | D | U | D | D | 75 |
11870 # | U | U | D | D | 110 |
11871 # | D | D | U | D | 135 |
11872 # | U | D | U | D | 150 |
11873 # | D | U | U | D | 300 |
11874 # | U | U | U | D | 600 |
11875 # | D | D | D | U | 1200 |
11876 # | U | D | D | U | 1800 |
11877 # | D | U | D | U | 2400 |
11878 # | U | U | D | U | 3600 |
11879 # | D | D | U | U | 4800 |
11880 # | U | D | U | U | 7200 |
11881 # | D | U | U | U | 9600 |
11882 # | U | U | U | U | 19200 |
11883 # +-----+-----+-----+-----+-----------+
11886 # +-----+-----+-----+-----------+
11887 # | 3 | 4 | 5 | Parity |
11888 # +-----+-----+-----+-----------+
11889 # | X | X | D | None |
11890 # | D | D | U | Odd |
11891 # | D | U | U | Even |
11892 # | U | D | U | Mark |
11893 # | U | U | U | Space |
11894 # +-----+-----+-----+-----------+
11898 # +-----+-----+-----------------+
11899 # | 7 | 8 | Communication |
11900 # +-----+-----+-----------------+
11901 # | D | D | Half Duplex |
11902 # | D | U | Full Duplex |
11903 # | U | D | Block |
11904 # | U | U | Local |
11905 # +-----+-----+-----------------+
11907 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
11908 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
11909 # should be present and all tvi native modes use the same string for this.
11910 # Finally, note that BSD has cud1=^V. -- esr)
11912 # TVI 950 has 11 function-keys -TD
11913 tvi950|TeleVideo 950,
11914 OTbs, am, hs, mir, msgr, xenl, xon,
11915 cols#80, it#8, lines#24, xmc#1,
11916 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
11917 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11918 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11919 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
11920 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
11922 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11923 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11925 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
11926 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
11927 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11928 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
11929 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
11930 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
11931 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
11932 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
11933 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11935 # is for 950 with two pages adds the following:
11936 # set 48 line page (\E\\2)
11937 # place cursor at page 0, line 24, column 1 (\E-07 )
11938 # set local (no send) edit keys (\Ek)
11940 # two page 950 adds the following:
11941 # when entering ex, set 24 line page (\E\\1)
11942 # when exiting ex, reset 48 line page (\E\\2)
11943 # place cursor at 0,24,1 (\E-07 )
11944 # set duplex (send) edit keys (\El) when entering vi
11945 # set local (no send) edit keys (\Ek) when exiting vi
11947 tvi950-2p|TeleVideo 950 w/2 pages,
11948 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11949 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11951 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11952 smkx=\El, use=tvi950,
11954 # is for 950 with four pages adds the following:
11955 # set 96 line page (\E\\3)
11956 # place cursor at page 0, line 24, column 1 (\E-07 )
11958 # four page 950 adds the following:
11959 # when entering ex, set 24 line page (\E\\1)
11960 # when exiting ex, reset 96 line page (\E\\3)
11961 # place cursor at 0,24,1 (\E-07 )
11963 tvi950-4p|TeleVideo 950 w/4 pages,
11964 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11965 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11967 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11968 smkx=\El, use=tvi950,
11970 # <is2> for reverse video 950 changes the following:
11971 # set reverse video (\Ed)
11973 # set vb accordingly (\Ed ...delay... \Eb)
11975 tvi950-rv|TeleVideo 950 rev video,
11976 flash=\Ed$<200/>\Eb,
11977 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
11978 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
11982 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
11983 tvi950-rv-2p|TeleVideo 950 rev video w/2 pages,
11984 flash=\Ed$<200/>\Eb,
11985 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11986 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11988 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11989 smkx=\El, use=tvi950,
11991 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
11992 tvi950-rv-4p|TeleVideo 950 rev video w/4 pages,
11993 flash=\Ed$<200/>\Eb,
11994 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
11995 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
11997 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
11998 smkx=\El, use=tvi950,
11999 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
12000 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
12001 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
12002 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
12003 # the :ko: string had :cl: in it, which means that one of the original
12004 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
12005 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
12006 # ko implies -- esr)
12007 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
12009 tvi955|TeleVideo 955,
12012 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
12013 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
12014 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
12015 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
12016 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
12017 rmam=\E[=7l, rmxon=^N,
12018 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
12020 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
12022 tvi955-w|955-w|TeleVideo 955 w/132 cols,
12024 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
12025 # use half-intensity as normal mode, full intensity as <bold>
12026 tvi955-hb|955-hb|TeleVideo 955 half-bright,
12027 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
12028 sgr0=\EG0\E[=5h, use=tvi955,
12029 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
12030 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
12031 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
12032 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
12033 # it does to the function keys. I deduced <rmam>/<smam>.
12034 # also added empty <acsc> to suppress tic warning, -- esr)
12035 tvi970|TeleVideo 970,
12036 OTbs, OTpt, am, da, db, mir, msgr,
12037 cols#80, it#8, lines#24,
12038 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
12039 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
12040 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
12041 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
12042 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
12043 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
12044 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12045 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
12046 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
12047 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
12048 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
12049 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
12050 smul=\E[4m, vpa=\E[%i%p1%dd,
12051 tvi970-vb|TeleVideo 970 with visual bell,
12052 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
12054 tvi970-2p|TeleVideo 970 with using 2 pages of memory,
12055 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
12057 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
12058 # per line (rather than 40), Esc K chooses the normal character set. Not sure
12059 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
12060 # <smul> strings are klutzy, but at least use no screen space.
12061 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
12062 # its absence means <smam>=\Ev isn't safe to use. -- esr)
12063 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
12064 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
12065 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
12066 tvipt|TeleVideo personal terminal,
12069 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
12070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
12071 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
12072 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
12073 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
12074 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
12075 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
12076 tvi9065|TeleVideo 9065,
12077 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
12078 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
12080 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
12081 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
12082 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
12083 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
12084 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
12085 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
12086 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
12087 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
12088 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
12089 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
12090 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
12091 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
12092 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
12093 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
12094 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12095 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
12096 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
12097 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
12098 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
12099 pfx=\E|%p1%{48}%+%c1%p2%s\031,
12100 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
12101 rep=\E[%p2%db%p1%c, rev=\EG4,
12102 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
12103 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
12104 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
12105 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
12106 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
12107 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
12108 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
12109 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
12110 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
12112 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
12113 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
12115 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
12116 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
12117 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index,
12121 # In September 1993, Visual Technology of Westboro, Massachusetts,
12122 # merged with White Pine Software of Nashua, New Hampshire.
12124 # White Pine Software may be contacted at +1 603/886-9050.
12125 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
12128 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
12129 # Recently I hacked together the following termcap for Visual
12130 # Technology's Visual 50 terminal. It's a slight modification of
12131 # the VT52 termcap.
12132 # It's intended to run when the Visual 50 is in VT52 emulation mode
12133 # (I know what you're thinking; if it's emulating a VT52, then why
12134 # another termcap? Well, it turns out that the Visual 50 can handle
12135 # <dl1> and db(?) among other things, which the VT52 can't)
12136 # The termcap works OK for the most part. The only problem is on
12137 # character inserts. The whole line gets painfully redrawn for each
12138 # character typed. Any suggestions?
12139 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
12140 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
12141 # disguise; <kf7>-<kf9> are really l1-l3.
12143 OTbs, OTpt, am, da, db, msgr,
12144 cols#80, it#8, lines#24,
12145 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
12146 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
12147 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
12148 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
12149 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
12150 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
12151 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
12152 # this one was BSD & SCO's vi50
12153 vi50adm|Visual 50 in adm3a mode,
12155 cols#80, it#8, lines#24,
12156 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12157 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
12158 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
12159 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
12160 rmso=\ET, smso=\EU,
12161 # From: Jeff Siegal <jbs@quiotix.com>
12163 OTbs, am, mir, msgr,
12164 cols#80, it#8, lines#24,
12165 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
12166 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
12167 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
12168 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
12169 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
12170 smir=\Ea, smso=\EU,
12172 # Visual 200 from BRL
12173 # The following switch settings are assumed for normal operation:
12174 # FULL_DUPLEX SCROLL CR
12175 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
12176 # Other switches may be set for operator convenience or communication
12178 # Character insertion is kludged in order to get around the "beep" misfeature.
12179 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
12180 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
12181 # and <dl1> strings, but we seem to get along fine without them.
12183 OTbs, OTpt, am, mir, msgr,
12184 OTkn#10, cols#80, it#8, lines#24,
12185 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
12186 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
12187 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
12188 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
12189 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
12190 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12191 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
12192 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
12193 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
12194 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
12195 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
12196 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
12197 # The older Visuals didn't come with function keys. This entry uses
12198 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
12199 # If your version of vi doesn't support function keys you may want
12201 vi200-f|Visual 200 no function keys,
12202 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
12203 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
12204 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
12206 vi200-rv|Visual 200 reverse video,
12207 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
12209 # the function keys are programmable but we don't reprogram them to their
12210 # default values with <is2> because programming them is very verbose. maybe
12211 # an initialization file should be made for the 300 and they could be stuck
12213 # (vi300: added <rmam>/<smam> based on init string -- esr)
12214 vi300|Visual 300 ANSI x3.64,
12217 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
12218 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12219 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12221 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
12222 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12223 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
12224 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
12225 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
12226 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
12227 smso=\E[1m, smul=\E[4m,
12228 # some of the vi300s have older firmware that has the command
12229 # sequence for setting editing extent reversed.
12230 vi300-old|Visual 300 with old firmware (set edit extent reversed),
12231 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
12233 # Visual 500 prototype entry from University of Wisconsin.
12234 # The best place to look for the escape sequences is page A1-1 of the
12235 # Visual 500 manual. The initialization sequence given here may be
12236 # overkill, but it does leave out some of the initializations which can
12237 # be done with the menus in set-up mode.
12238 # The :xp: line below is so that emacs can understand the padding requirements
12239 # of this slow terminal. :xp: is 10 time the padding factor.
12240 # (vi500: removed unknown :xp#4: termcap;
12241 # also added empty <acsc> to suppress tic warning -- esr)
12244 cols#80, it#8, lines#33,
12245 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
12246 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
12247 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12248 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
12249 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
12251 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
12252 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12253 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
12254 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
12256 # The visual 550 is a visual 300 with Tektronix graphics,
12257 # and with 33 lines. clear screen is modified here to
12258 # also clear the graphics.
12259 vi550|Visual 550 ANSI x3.64,
12261 clear=\030\E[H\E[2J, use=vi300,
12263 vi603|visual603|Visual 603,
12265 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
12266 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
12267 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
12268 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
12269 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
12270 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
12271 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12272 tsl=\EP2~, use=decid+cpr, use=vt100+4bsd,
12277 # 3471 North First Street
12278 # San Jose, CA 95134
12279 # Vox: (408)-473-1200
12280 # Fax: (408) 473-1222
12281 # Web: http://www.wyse.com
12283 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
12284 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
12285 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
12286 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
12289 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
12290 # They now own the Qume and Amdek brands, too. So these are the people to
12291 # talk with about all Link, Qume, and Amdek terminals.
12293 # These entries include a few small fixes.
12294 # I canceled the bel capacities in the vb entries.
12295 # I made two trivial syntax fixes in the wyse30 entry.
12296 # I made some entries relative to adm+sgr.
12299 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
12301 # Although the Wyse 30 can support more than one attribute
12302 # it requires magic cookies to do so. Many applications do not
12303 # function well with magic cookies. The following terminfo uses
12304 # the protect mode to support one attribute (dim) without cookies.
12305 # If more than one attribute is needed then the wy30-mc terminfo
12308 wy30|wyse30|Wyse 30,
12309 am, bw, mc5i, mir, msgr, xon,
12310 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12311 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
12312 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
12313 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12314 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
12315 ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, home=^^,
12316 ht=\011$<1>, hts=\E1, il1=\EE$<2>, ind=\n$<2>, ip=$<2>,
12317 is2=\E'\E(\E\^3\E`9\016\024, kHOM=\E{, kbs=^H, kcbt=\EI,
12318 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12319 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
12320 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
12321 khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er,
12322 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12323 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12324 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
12325 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12326 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12327 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12328 smso=\E`7\E), tbc=\E0, use=wyse+sl,
12330 # This terminal description uses the non-hidden attribute mode
12331 # (with magic cookie).
12333 # (wy30-mc: added <smcup> to suppress tic warning --esr)
12334 wy30-mc|wyse30-mc|Wyse 30 with magic cookies,
12337 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
12338 rmcup=\EG0, rmso=\EG0,
12339 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12340 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12341 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12342 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12343 smso=\EG4, use=wy30, use=adm+sgr,
12344 # The mandatory pause used by <flash> does not work with
12345 # older versions of terminfo. If you see this effect then
12346 # unset xon and delete the / from the delay.
12347 # i.e. change $<100/> to $<100>
12348 wy30-vb|wyse30-vb|Wyse 30 visible bell,
12351 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
12352 # Normal) without magic cookies by using the protect mode.
12353 # The following description uses this feature, but when more
12354 # than one attribute is put on the screen at once, all attributes
12355 # will be changed to be the same as the last attribute given.
12356 # The Wyse 50 can support more attributes when used with magic
12357 # cookies. The wy50-mc terminal description uses magic cookies
12358 # to correctly handle multiple attributes on a screen.
12360 wy50|wyse50|Wyse 50,
12361 am, bw, mc5i, mir, msgr, xon,
12362 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8,
12363 acsc=a;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, cbt=\EI,
12364 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
12365 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
12366 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, ed=\EY$<20>,
12367 el=\ET, flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
12368 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12369 is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12370 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12371 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12372 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12373 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12374 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12375 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12376 mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
12377 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12378 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
12379 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
12380 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
12382 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
12383 smso=\E`6\E), tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
12384 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
12385 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
12386 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=wyse+sl,
12387 wyse+sl|status line for Wyse terminals,
12390 dsl=\EF\r, fsl=\r, tsl=\EF,
12392 # This terminal description uses the non-hidden attribute mode
12393 # (with magic cookie).
12395 # The mandatory pause used by flash does not work with some
12396 # older versions of terminfo. If you see this effect then
12397 # unset <xon> and delete the / from the delay.
12398 # i.e. change $<100/> to $<100>
12399 # (wy50-mc: added <smcup> to suppress tic warning --esr)
12400 wy50-mc|wyse50-mc|Wyse 50 with magic cookies,
12403 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
12404 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
12405 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
12406 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
12407 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
12408 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
12409 smso=\EGt, use=wy50, use=adm+sgr,
12410 wy50-vb|wyse50-vb|Wyse 50 visible bell,
12412 wy50-w|wyse50-w|Wyse 50 132-column,
12413 cols#132, lw#7, nlab#16, wsl#97,
12414 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12416 wy50-wvb|wyse50-wvb|Wyse 50 132-column visible bell,
12420 # The Wyse 350 is a Wyse 50 with color.
12421 # Unfortunately this means that it has magic cookies.
12422 # The color attributes are designed to overlap the reverse, dim and
12423 # underline attributes. This is nice for monochrome applications
12424 # because you can make underline stuff green (or any other color)
12425 # but for true color applications it's not so hot because you cannot
12426 # mix color with reverse, dim or underline.
12427 # To further complicate things one of the attributes must be
12428 # black (either the foreground or the background). In reverse video
12429 # the background changes color with black letters. In normal video
12430 # the foreground changes colors on a black background.
12431 # This terminfo uses some of the more advanced features of curses
12432 # to display both color and blink. In the final analysis I am not
12433 # sure that the wy350 runs better with this terminfo than it does
12434 # with the wy50 terminfo (with user adjusted colors).
12436 # The mandatory pause used by flash does not work with
12437 # older versions of terminfo. If you see this effect then
12438 # unset xon and delete the / from the delay.
12439 # i.e. change $<100/> to $<100>
12441 # Bug: The <op> capability resets attributes.
12442 wy350|wyse350|Wyse 350,
12443 am, bw, mc5i, mir, xon,
12444 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
12446 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
12447 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
12448 cub1=^H, cud1=\n, cuf1=^L,
12449 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
12450 dim=\EGp, dl1=\ER, ed=\EY$<20>, el=\ET,
12451 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, il1=\EE,
12452 ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>,
12453 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
12454 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
12455 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
12456 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12457 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
12458 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12459 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
12460 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
12461 pfx=\Ez%p1%{63}%+%c%p2%s\177,
12462 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
12463 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
12464 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
12465 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
12466 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
12468 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
12469 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
12470 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
12472 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
12473 smir=\Eq, smln=\EA10, tbc=\E0, use=adm+sgr, use=wyse+sl,
12474 wy350-vb|wyse350-vb|Wyse 350 visible bell,
12476 wy350-w|wyse350-w|Wyse 350 132-column,
12477 cols#132, lw#7, nlab#16, wsl#97,
12478 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
12480 wy350-wvb|wyse350-wvb|Wyse 350 132-column visible bell,
12483 # This terminfo description is untested.
12484 # The wyse100 emulates an adm31, so the adm31 entry should work.
12488 cols#80, lines#24, xmc#1,
12489 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12490 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12491 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
12492 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
12493 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
12494 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
12495 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
12497 # The Wyse 120/150 has most of the features of the Wyse 60.
12498 # This terminal does not need padding up to 9600 baud!
12499 # <msgr> should be set but the clear screen fails when in
12500 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12503 wy120|wyse120|wy150|wyse150|Wyse 120/150,
12504 am, bw, km, mc5i, mir, msgr, xon,
12505 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601,
12506 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12507 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12508 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12509 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12510 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
12511 flash=\E`8$<100/>\E`9, home=^^, ht=\011$<1>, hts=\E1,
12512 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12513 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12515 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12516 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12517 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12518 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12519 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12520 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12521 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12522 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12523 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12524 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12525 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12526 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
12527 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
12528 rs3=\EwG\Ee($<100>,
12529 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12530 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12531 %{64}%|%;%?%p7%t%{1}%|%;%c,
12532 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12533 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12534 tbc=\E0, use=adm+sgr, use=wyse+sl,
12536 wy120-w|wyse120-w|wy150-w|wyse150-w|Wyse 120/150 132-column,
12537 cols#132, lw#7, nlab#16, wsl#97,
12538 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12539 rs2=\E`;$<70>, use=wy120,
12541 wy120-25|wyse120-25|wy150-25|wyse150-25|Wyse 120/150 80-column 25-lines,
12542 lh@, lines#25, lw@, nlab@,
12543 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
12545 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|Wyse 120/150 132-column 25-lines,
12546 lh@, lines#25, lw@, nlab@,
12547 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
12549 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
12552 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
12555 # The Wyse 60 is like the Wyse 50 but with more padding.
12556 # The reset strings are slow and the pad times very depending
12557 # on other parameters such as font loading. I have tried
12558 # to follow the following outline:
12560 # <rs1> -> set personality
12561 # <rs2> -> set number of columns
12562 # <rs3> -> set number of lines
12563 # <is1> -> select the proper font
12564 # <is2> -> do the initialization
12565 # <is3> -> set up display memory (2 pages)
12567 # The Wyse 60's that have VT100 emulation are slower than the
12568 # older Wyse 60's. This change happened mid-1987.
12569 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
12571 # The meta key is only half right. This terminal will return the
12572 # high order bit set when you hit CTRL-function_key
12574 # It may be useful to assign two function keys with the
12575 # values \E=(\s look at old data in page 1
12576 # \E=W, look at bottom of page 1
12577 # where \s is a space ( ).
12580 # The Wyse 60 runs faster when the XON/XOFF
12581 # handshake is turned off.
12583 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
12584 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12585 wy60|wyse60|Wyse 60,
12586 am, bw, km, mc5i, mir, msgr,
12587 cols#80, lh#1, lines#24, lw#8, nlab#8,
12588 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12589 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
12590 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12591 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12592 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>,
12593 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, home=\E{,
12594 ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, ip=$<3>,
12596 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12598 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12599 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12600 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12601 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12602 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12603 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12604 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12605 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
12606 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12607 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12608 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
12609 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
12610 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
12611 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
12612 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12613 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12614 %{64}%|%;%?%p7%t%{1}%|%;%c,
12615 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12616 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12617 tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF12=^Ak\r,
12618 kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, kF2=^Aa\r,
12619 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
12620 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, use=wyse+sl,
12622 wy60-w|wyse60-w|Wyse 60 132-column,
12623 cols#132, lw#7, nlab#16, wsl#97,
12624 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
12625 rs2=\EeF$<150>\E`;$<150>, use=wy60,
12627 wy60-25|wyse60-25|Wyse 60 80-column 25-lines,
12628 lh@, lines#25, lw@, nlab@,
12629 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
12630 wy60-25-w|wyse60-25-w|Wyse 60 132-column 25-lines,
12631 lh@, lines#25, lw@, nlab@,
12632 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
12634 wy60-42|wyse60-42|Wyse 60 80-column 42-lines,
12636 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
12637 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
12638 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
12639 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
12640 wy60-42-w|wyse60-42-w|Wyse 60 132-column 42-lines,
12641 cols#132, lw#7, nlab#16, wsl#97,
12642 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12643 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
12644 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
12646 wy60-43|wyse60-43|Wyse 60 80-column 43-lines,
12647 lh@, lines#43, lw@, nlab@,
12648 pln@, rs3=\Ee+$<150>, use=wy60-42,
12649 wy60-43-w|wyse60-43-w|Wyse 60 132-column 43-lines,
12650 lh@, lines#43, lw@, nlab@,
12651 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
12653 wy60-vb|wyse60-vb|Wyse 60 visible bell,
12655 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
12658 # The Wyse-99GT looks at lot like the Wyse 60 except that it
12659 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
12660 # setup parameter controls the number of lines on the screen.
12661 # For the Wyse 99GT the "lines" setup parameter controls the
12662 # number of lines in a page. The screen can display 25 lines max.
12663 # The Wyse-99GT also has personalities for the VT220 and
12664 # Tektronix 4014. But this has no bearing on the native mode.
12666 # (msgr) should be set but the clear screen fails when in
12667 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12668 # then set msgr, else use msgr@.
12670 # u0 -> enter Tektronix mode
12671 # u1 -> exit Tektronix mode
12673 wy99gt|wyse99gt|Wyse 99gt,
12675 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
12676 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
12677 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
12678 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1,
12679 u0=\E~>\E8, u1=\E[42h, use=wy60,
12681 wy99gt-w|wyse99gt-w|Wyse 99gt 132-column,
12682 cols#132, lw#7, nlab#16, wsl#97,
12683 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
12684 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
12687 wy99gt-25|wyse99gt-25|Wyse 99gt 80-column 25-lines,
12688 lh@, lines#25, lw@, nlab@,
12689 pln@, rs2=\E`:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
12691 wy99gt-25-w|wyse99gt-25-w|Wyse 99gt 132-column 25-lines,
12692 lh@, lines#25, lw@, nlab@,
12693 pln@, rs2=\E`;$<150>, use=wy99gt-w,
12695 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
12698 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
12699 bel@, use=wy99gt-w,
12701 # Can't set tabs! Other bugs (ANSI mode only):
12702 # - can't redefine function keys (anyway, key redefinition in ANSI mode
12703 # is too much complex to be described);
12704 # - meta key can't be described (the terminal forgets it when reset);
12705 # The xon-xoff handshaking can't be disabled while in ANSI personality, so
12706 # emacs can't work at speed greater than 9600 baud. No padding is needed at
12708 # dch1 has been commented out because it causes annoying glittering when
12709 # vi deletes one character at the beginning of a line with tabs in it.
12710 # dch makes sysgen(1M) have a horrible behaviour when deleting
12711 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
12712 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
12713 # not, so smir and rmir are commented out as well.
12714 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12715 wy99-ansi|Wyse WY-99GT in ANSI mode (int'l PC keyboard),
12716 am, km, mc5i, mir, msgr, xenl,
12717 cols#80, it#8, lines#25, vt#3,
12718 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
12719 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12720 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
12721 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
12722 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
12723 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
12724 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
12725 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
12726 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
12727 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
12728 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
12729 il1=\E[L, ind=\n$<1>, invis=\E[8m,
12730 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
12731 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
12732 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12733 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
12734 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
12735 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
12736 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
12737 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
12738 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
12739 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12740 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
12741 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
12742 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
12745 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
12746 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
12747 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
12748 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
12750 # This is the american terminal. Here tabs work fine.
12751 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12752 wy99a-ansi|Wyse WY-99GT in ANSI mode (US PC keyboard),
12753 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
12755 # This terminal (firmware version 02) has a lot of bugs:
12756 # - can't set tabs;
12757 # - other bugs in ANSI modes (see above).
12758 # This description disables handshaking when using cup. This is because
12759 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
12760 # cannot be used at speeds greater than 9600 baud, because at greater
12761 # speeds handshaking is needed even for character sending. If you use
12762 # DTR handshaking, you can use even greater speeds.
12763 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12764 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
12765 am, bw, km, mc5i, mir, msgr, xon,
12766 cols#80, it#8, lines#25,
12767 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
12768 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
12769 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
12770 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12771 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, ed=\EY$<8*>,
12772 el=\ET$<8>, enacs=\Ec@1J$<2000>,
12773 flash=\E\^1$<30/>\E\^0, home=^^, ht=^I, il1=\EE, ind=\n,
12775 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
12776 \^0\E`1\E`4\Ee.\E`:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"
12778 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
12779 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
12780 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
12781 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
12782 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
12783 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12784 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
12785 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
12786 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
12787 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
12788 9\E\^0\E`1\E`4\Ee.\E`:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
12789 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
12790 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
12791 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
12793 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
12794 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, use=wyse+sl,
12796 # This is the american terminal. Here tabs work.
12797 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
12798 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
12799 hts=\E1, tbc=\E0, use=wy99f,
12802 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
12803 # The reset strings are slow and the pad times very depending
12804 # on other parameters such as font loading. I have tried
12805 # to follow the following outline:
12807 # <rs1> -> set personality
12808 # <rs2> -> set number of columns
12809 # <rs3> -> set number of lines
12810 # <is1> -> select the proper font
12811 # <is2> -> do the initialization
12812 # <is3> -> set up display memory (2 pages)
12814 # The display memory may be used for either text or graphics.
12815 # When "Display Memory = Shared" the terminal will have more pages
12816 # but garbage may be left on the screen when you switch from
12817 # graphics to text. If "Display Memory = Unshared" then the
12818 # text area will be only one page long.
12820 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
12821 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
12822 wy160|wyse160|Wyse 160,
12823 am, bw, km, mc5i, mir, msgr,
12824 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
12825 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12826 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
12827 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12828 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
12829 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, ed=\EY$<30>, el=\ET$<5>,
12830 flash=\E`8$<100/>\E`9, home=\E{, ht=^I, hts=\E1,
12831 il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
12832 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
12834 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12835 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12836 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12837 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12838 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12839 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
12840 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
12841 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
12842 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12843 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12844 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
12845 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
12846 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
12847 rs2=\E`:$<100>, rs3=\EwG\Ee($<140>,
12848 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12849 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12850 %{64}%|%;%?%p7%t%{1}%|%;%c,
12851 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12852 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
12853 tbc=\E0, use=adm+sgr, use=wyse+sl,
12855 wy160-w|wyse160-w|Wyse 160 132-column,
12856 cols#132, lw#7, nlab#16, wsl#90,
12857 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
12858 rs2=\EeF$<150>\E`;$<150>, use=wy160,
12860 wy160-25|wyse160-25|Wyse 160 80-column 25-lines,
12861 lh@, lines#25, lw@, nlab@,
12862 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
12863 wy160-25-w|wyse160-25-w|Wyse 160 132-column 25-lines,
12864 lh@, lines#25, lw@, nlab@,
12865 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
12867 wy160-42|wyse160-42|Wyse 160 80-column 42-lines,
12869 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
12870 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
12871 rs3=\Ee*$<150>, use=wy160,
12872 wy160-42-w|wyse160-42-w|Wyse 160 132-column 42-lines,
12873 cols#132, lw#7, nlab#16, wsl#90,
12874 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
12875 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
12877 wy160-43|wyse160-43|Wyse 160 80-column 43-lines,
12878 lh@, lines#43, lw@, nlab@,
12879 pln@, rs3=\Ee+$<150>, use=wy160-42,
12880 wy160-43-w|wyse160-43-w|Wyse 160 132-column 43-lines,
12881 lh@, lines#43, lw@, nlab@,
12882 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
12884 wy160-vb|wyse160-vb|Wyse 160 visible bell,
12886 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
12889 # The Wyse 75 is a VT100 lookalike without advanced video.
12891 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
12892 # Underline) without magic cookies. The following description
12893 # uses this capability, but when more than one attribute is
12894 # put on the screen at once, all attributes will be changed
12895 # to be the same as the last attribute given.
12896 # The Wyse 75 can support more attributes when used with magic
12897 # cookies. The wy75-mc terminal description uses magic cookies
12898 # to correctly handle multiple attributes on a screen.
12900 wy75|wyse75|Wyse 75,
12901 am, hs, mc5i, mir, msgr, xenl, xon,
12902 cols#80, lines#24, ma#1, pb#1201, wsl#78,
12903 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12904 bel=^G, cbt=\E[Z, clear=\E[H\E[J$<30>, cr=\r,
12905 csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H,
12906 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12907 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12908 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m,
12909 dl=\E[%p1%dM$<1*>, dl1=\E[M,
12910 dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX,
12911 ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0,
12912 flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, home=\E[H,
12913 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>,
12914 il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>,
12915 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
12916 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
12917 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
12918 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12919 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12920 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
12921 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
12922 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12923 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
12924 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
12925 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
12926 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
12927 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
12929 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
12930 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
12932 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12933 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
12934 tbc=\E[3g, tsl=\E[>\,\001, use=decid+cpr, use=vt220+cvis,
12937 # This terminal description uses the non-hidden attribute mode
12938 # (with magic cookie).
12940 wy75-mc|wyse75-mc|Wyse 75 with magic cookies,
12943 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
12944 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
12945 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
12946 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
12948 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
12950 wy75-vb|wyse75-vb|Wyse 75 with visible bell,
12953 wy75-w|wyse75-w|Wyse 75 in 132 column mode,
12955 rs2=\E[35h\E[?3h$<80>, use=wy75,
12956 wy75-wvb|wyse75-wvb|Wyse 75 with visible bell 132 columns,
12960 # Wyse 85 emulating a VT220 7 bit mode.
12961 # 24 line screen with status line.
12963 # The VT220 mode permits more function keys but it wipes out
12964 # the escape key. I strongly recommend that <f11> be set to
12966 # The terminal may have to be set for 8 data bits and 2 stop
12967 # bits for the arrow keys to work.
12968 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
12969 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
12970 # <dch> leave trash on the screen when used without XON/XOFF.
12972 wy85|wyse85|Wyse 85,
12973 am, hs, mc5i, mir, msgr, xenl, xon,
12974 cols#80, it#8, lines#24, wsl#80,
12975 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12976 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12977 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12978 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
12979 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
12980 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
12981 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
12982 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
12983 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
12984 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12985 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
12986 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
12987 ip=$<3>, is1=\E[62;1"p\E[?5W,
12988 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
12989 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12990 kcuf1=\E[C, kcuu1=\E[A, kf10=\E[21~, kf11=\E[23~,
12991 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12992 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12993 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12994 kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2,
12995 lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8,
12996 rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12997 rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
12998 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
12999 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13000 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13001 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13002 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13003 tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr,
13004 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
13006 # Wyse 85 with visual bell.
13007 wy85-vb|wyse85-vb|Wyse 85 with visible bell,
13008 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
13010 # Wyse 85 in 132-column mode.
13011 wy85-w|wyse85-w|Wyse 85 in 132-column mode,
13013 rs2=\E[35h$<70/>\E[?3h, use=wy85,
13015 # Wyse 85 in 132-column mode with visual bell.
13016 wy85-wvb|wyse85-wvb|Wyse 85 with visible bell 132-columns,
13019 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
13020 # This copes with an apparent firmware bug in the wy85. He writes:
13021 # "What I did was change leave the terminal cursor keys set to Normal
13022 # (instead of application), and change \E[ to \233 for all the keys in
13023 # terminfo. At one point, I found some reference indicating that this
13024 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
13025 # me), but I can't find that and the server under my bookmark to "Wyse
13026 # Technical" isn't responding. So there's the question of whether the wy85
13027 # terminfo should reflect the manufacturer's intended behaviour of the terminal
13029 wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode,
13030 am, hs, mc5i, mir, msgr, xenl, xon,
13031 cols#80, it#8, lines#24, wsl#80,
13032 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13033 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13034 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13035 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
13036 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
13037 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
13038 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
13039 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
13040 el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
13041 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
13042 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
13043 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
13044 ip=$<3>, is1=\E[62;1"p\E[?5W,
13045 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
13046 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
13047 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
13048 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
13049 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
13050 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
13051 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
13052 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
13053 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
13054 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
13055 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
13056 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
13057 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
13058 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
13059 rs3=\E[?5l, sc=\E7,
13060 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13061 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
13062 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13063 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13064 tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr,
13067 # Wyse 185 emulating a VT320 7 bit mode.
13069 # This terminal always displays 25 lines. These lines may be used
13070 # as 24 data lines and a terminal status line (top or bottom) or
13071 # 25 data lines. The 48 and 50 line modes change the page size
13072 # and not the number of lines on the screen.
13074 # The Compose Character key can be used as a meta key if changed
13077 wy185|wyse185|Wyse 185,
13078 am, hs, km, mc5i, mir, msgr, xenl, xon,
13079 cols#80, it#8, lines#24, wsl#80,
13080 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13081 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13082 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
13083 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
13084 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13085 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13086 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
13087 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
13088 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
13089 el=\E[K, el1=\E[1K, enacs=\E)0,
13090 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
13091 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
13092 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
13093 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
13094 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
13095 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
13096 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
13097 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
13098 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
13099 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
13100 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13101 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13102 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13103 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
13104 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
13105 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
13106 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
13107 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13108 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13109 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
13110 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
13111 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
13112 use=decid+cpr, use=vt220+vtedit, use=vt220+keypad,
13114 # Wyse 185 with 24 data lines and top status (terminal status)
13115 wy185-24|wyse185-24|Wyse 185 with 24 data lines,
13117 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13120 # Wyse 185 with visual bell.
13121 wy185-vb|wyse185-vb|Wyse 185+flash,
13124 # Wyse 185 in 132-column mode.
13125 wy185-w|wyse185-w|Wyse 185 in 132-column mode,
13127 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13128 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
13130 # Wyse 185 in 132-column mode with visual bell.
13131 wy185-wvb|wyse185-wvb|Wyse 185+flash+132 cols,
13134 # wy325 terminfo entries
13135 # Done by Joe H. Davis 3-9-92
13137 # lines 25 columns 80
13139 wy325|wyse325|Wyse epc,
13141 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601,
13142 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
13143 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
13144 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13145 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
13146 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>,
13147 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1,
13148 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
13149 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
13151 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
13152 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
13153 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
13154 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
13155 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
13156 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
13157 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
13158 mc0=\EP, mc4=^T, mc5=\Ed#,
13159 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
13160 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
13161 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
13162 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
13163 rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>,
13164 rs3=\EwG\Ee($<100>,
13165 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
13166 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
13167 %{64}%|%;%?%p7%t%{1}%|%;%c,
13168 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
13169 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
13170 use=adm+sgr, use=wyse+sl,
13173 # lines 24 columns 80 vb
13175 wy325-vb|wyse325-vb|Wyse-325 with visual bell,
13179 # lines 24 columns 132
13181 wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode,
13182 cols#132, lw#7, nlab#16, wsl#97,
13183 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
13184 rs2=\E`;$<70>, use=wy325,
13186 # lines 25 columns 80
13188 wy325-25|wyse325-25|wy325-80|wyse-325|Wyse-325 25 lines,
13189 lh@, lines#25, lw@, nlab@,
13190 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13192 # lines 25 columns 132
13194 wy325-25w|wyse325-25w|Wyse-325 132 columns,
13195 lh@, lines#25, lw@, nlab@,
13196 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13198 # lines 25 columns 132 vb
13200 wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video,
13204 # lines 42 columns 80
13206 wy325-42|wyse325-42|Wyse-325 42 lines,
13207 lh@, lines#42, lw@, nlab@,
13208 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
13210 # lines 42 columns 132
13212 wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode,
13213 lh@, lines#42, lw@, nlab@,
13214 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13216 # lines 42 columns 132 vb
13218 wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell,
13221 # lines 43 columns 80
13223 wy325-43|wyse325-43|Wyse-325 43 lines,
13224 lh@, lines#43, lw@, nlab@,
13227 # lines 43 columns 132
13229 wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode,
13230 lh@, lines#43, lw@, nlab@,
13231 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
13233 # lines 43 columns 132 vb
13235 wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell,
13238 # Wyse 370 -- 24 line screen with status line.
13240 # The terminal may have to be set for 8 data bits and 2 stop
13241 # bits for the arrow keys to work.
13243 # If you change keyboards the terminal will send different
13244 # escape sequences.
13245 # The following definition is for the basic terminal without
13248 # <u0> -> enter Tektronix 4010/4014 mode
13249 # <u1> -> exit Tektronix 4010/4014 mode
13250 # <u2> -> enter ASCII mode (from any ANSI mode)
13251 # <u3> -> exit ASCII mode (goto native ANSI mode)
13252 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
13253 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
13255 # Bug: The <op> capability resets attributes.
13256 wy370-nk|Wyse 370 without function keys,
13257 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
13258 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
13259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13260 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13261 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
13262 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13263 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13264 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
13265 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
13266 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
13267 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
13268 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
13269 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
13270 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
13271 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
13273 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
13274 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
13275 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
13276 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
13278 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
13279 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
13280 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
13282 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
13283 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
13284 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
13285 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
13286 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
13287 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
13288 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
13289 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13290 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13291 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
13292 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
13293 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
13294 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
13295 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
13298 # Function key set for the ASCII (wy-50 compatible) keyboard
13299 # This is the default 370.
13301 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
13302 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13303 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
13304 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13305 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
13306 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
13307 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
13308 knp=\E[U, kpp=\E[V, use=wy370-nk,
13310 # Function key set for the VT-320 (and wy85) compatible keyboard
13312 wy370-105k|Wyse 370 with 105 key keyboard,
13313 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13314 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
13315 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
13316 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~,
13317 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
13318 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13319 lf4=PF4, use=vt220+vtedit, use=wy370-nk,
13322 # Function key set for the PC compatible keyboard
13324 wy370-EPC|Wyse 370 with 102 key keyboard,
13325 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13326 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
13327 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13328 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13329 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
13331 # Wyse 370 with visual bell.
13332 wy370-vb|Wyse 370 with visible bell,
13335 # Wyse 370 in 132-column mode.
13336 wy370-w|Wyse 370 in 132-column mode,
13338 rs2=\E[35h\E[?3h$<70>, use=wy370,
13340 # Wyse 370 in 132-column mode with visual bell.
13341 wy370-wvb|Wyse 370 with visible bell 132-columns,
13342 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
13343 wy370-rv|Wyse 370 reverse video,
13344 rs3=\E[32h\E[?5h, use=wy370,
13346 # Wyse 99gt Tektronix 4010/4014 emulator,
13348 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
13351 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13352 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13353 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13354 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13355 %{31}%&%{64}%+%c\037,
13357 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13360 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13362 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
13364 # Wyse 160 Tektronix 4010/4014 emulator,
13366 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
13367 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
13368 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
13369 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
13370 %{31}%&%{64}%+%c\037,
13371 home=^]8`g @\037, use=wy99gt-tek,
13373 # Wyse 370 Tektronix 4010/4014 emulator,
13375 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
13378 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
13379 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
13380 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
13381 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
13383 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
13386 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
13388 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
13389 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
13391 # Vendor-supplied Wyse entries end here.
13394 #TITLE: TERMINFO ENTRY WY520
13396 # The WY520 terminfo is based on the WY285 entry published on the WYSE
13397 # BBS with the addition of more function keys and special keys.
13399 # rs1 -> set personality
13400 # rs2 -> set number of columns
13401 # rs3 -> set number of lines
13402 # is1 -> select the proper font
13403 # is2 -> do the initialization
13404 # is3 -> If this string is empty then rs3 gets sent.
13406 # Wyse 520 emulating a VT420 7 bit mode with default ANSI keyboard
13407 # - The BS key is programmed to generate BS in smcup since
13408 # is2 doesn't seem to work.
13409 # - Remove and shift/Remove: delete a character
13410 # - Insert : enter insert mode
13411 # - Find : delete to end of file
13412 # - Select : clear a line
13413 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
13415 # - Bottom status line (host writable line) is used.
13416 # - smkx,rmkx are removed because this would put the numeric
13417 # keypad in Dec application mode which doesn't seem to work
13418 # with SCO applications.
13420 wy520|wyse520|Wyse 520,
13421 am, hs, km, mc5i, mir, xenl, xon,
13422 cols#80, it#8, lines#24, wsl#80,
13423 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13424 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13425 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
13426 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
13427 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13428 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13429 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
13430 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
13431 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
13432 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
13433 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
13434 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
13435 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
13436 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
13437 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[1~, kel=\E[4~,
13438 kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
13439 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
13440 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
13441 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
13442 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3,
13443 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13444 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
13445 rmso=\E[m, rmul=\E[24m,
13446 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
13447 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
13448 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
13449 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13450 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
13451 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13452 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
13453 vpa=\E[%i%p1%dd, use=decid+cpr, use=vt220+vtedit,
13456 # Wyse 520 with 24 data lines and status (terminal status)
13457 wy520-24|wyse520-24|Wyse 520 with 24 data lines,
13459 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13462 # Wyse 520 with visual bell.
13463 wy520-vb|wyse520-vb|Wyse 520 with visible bell,
13464 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
13466 # Wyse 520 in 132-column mode.
13467 wy520-w|wyse520-w|Wyse 520 in 132-column mode,
13469 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13470 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
13472 # Wyse 520 in 132-column mode with visual bell.
13473 wy520-wvb|wyse520-wvb|Wyse 520 with visible bell 132-columns,
13474 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
13477 # Wyse 520 emulating a VT420 7 bit mode.
13478 # The DEL key is programmed to generate BS in is2.
13479 # With EPC keyboard.
13480 # - 'End' key will clear till end of line on EPC keyboard
13481 # - Shift/End : ignored.
13482 # - Insert : enter insert mode.
13483 # - Delete : delete a character (have to change interrupt character
13484 # to CTRL-C: stty intr '^c') for it to work since the
13485 # Delete key sends 7FH.
13486 wy520-epc|wyse520-epc|Wyse 520 with EPC keyboard,
13487 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
13488 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
13491 # Wyse 520 with 24 data lines and status (terminal status)
13492 # with EPC keyboard.
13493 wy520-epc-24|wyse520-pc-24|Wyse 520 with 24 data lines and EPC keyboard,
13495 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
13498 # Wyse 520 with visual bell.
13499 wy520-epc-vb|wyse520-pc-vb|Wyse 520 with visible bell and EPC keyboard,
13500 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
13502 # Wyse 520 in 132-column mode.
13503 wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard,
13505 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
13506 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
13508 # Wyse 520 in 132-column mode with visual bell.
13509 wy520-epc-wvb|wyse520-p-wvb|Wyse 520 with visible bell 132-columns and EPC keyboard,
13510 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
13512 # Wyse 520 in 80-column, 36 lines
13513 wy520-36|wyse520-36|Wyse 520 with 36 data lines,
13516 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13519 # Wyse 520 in 80-column, 48 lines
13520 wy520-48|wyse520-48|Wyse 520 with 48 data lines,
13523 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13526 # Wyse 520 in 132-column, 36 lines
13527 wy520-36w|wyse520-36w|Wyse 520 with 132 columns and 36 data lines,
13530 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13533 # Wyse 520 in 132-column, 48 lines
13534 wy520-48w|wyse520-48w|Wyse 520 with 48 data lines (132 column),
13537 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13541 # Wyse 520 in 80-column, 36 lines with EPC keyboard
13542 wy520-36pc|wyse520-36pc|Wyse 520 with 36 data lines and EPC keyboard,
13545 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
13548 # Wyse 520 in 80-column, 48 lines with EPC keyboard
13549 wy520-48pc|wyse520-48pc|Wyse 520 with 48 data lines and EPC keyboard,
13552 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
13555 # Wyse 520 in 132-column, 36 lines with EPC keyboard
13556 wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard (132 column),
13559 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
13562 # Wyse 520 in 132-column, 48 lines with EPC keyboard
13563 wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard (132 column),
13566 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
13569 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
13570 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
13571 # file and we don't know what <hts> is -- esr)
13572 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
13574 cols#80, it#8, lines#24,
13575 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
13576 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
13577 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
13578 is2=\E`:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
13579 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
13580 rmul=^O, rs1=\E`:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
13583 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
13584 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
13585 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13586 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
13589 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
13590 wy100q|Wyse 100 for Quotron,
13592 cols#80, lines#24, xmc#1,
13593 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
13594 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13595 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
13596 is2=\E`:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
13597 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
13599 #### Kermit terminal emulations
13601 # Obsolete Kermit versions may be listed in the section describing obsolete
13602 # non-ANSI terminal emulators later in the file.
13605 # KERMIT standard all versions.
13606 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13607 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13608 # From: greg small <gts@populi.berkeley.edu> 9-25-84
13609 kermit|standard kermit,
13612 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13613 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13614 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
13615 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13616 kermit-am|standard kermit plus auto-margin,
13618 is2=K1 Standard Kermit plus Automatic Margins\n,
13620 # IBMPC Kermit 1.2.
13621 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
13622 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
13624 # From: greg small <gts@populi.berkeley.edu> 8-30-84
13625 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
13628 clear=\EH\EJ, ed@, el@,
13629 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
13630 # IBMPC Kermit 1.20
13631 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13632 # Initialization must escape from that region by cursor position to line 24.
13633 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
13634 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
13635 # From: greg small <gts@populi.berkeley.edu> 12-19-84
13636 pckermit120|UCB IBMPC Kermit 1.20,
13638 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
13640 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
13642 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
13643 # MS-DOS Kermit 2.27 for the IBMPC
13644 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
13645 # Cannot use line 25, now acts funny like ANSI special scrolling region.
13646 # Initialization must escape from that region by cursor position to line 24.
13647 # Does not use am: because autowrap is lost when kermit dropped and restarted.
13648 # Reverse video for standout like H19.
13649 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
13650 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13651 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
13653 cols#80, it#8, lines#24,
13654 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13655 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13656 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
13657 home=\EH, ht=^I, il1=\EL,
13658 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
13659 \sIBMPC\s3-17-85\n,
13660 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
13661 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
13662 # MS-DOS Kermit 2.27 with automatic margins
13663 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13664 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
13666 cvvis=\EO\Eq\EG\EvK5,
13667 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
13668 \smargins\s3-17-85\n,
13670 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
13671 # Automatic margins now default. Use ansi <sgr> for highlights.
13672 # Define function keys.
13673 # (msk22714: removed obsolete ":kn#10:" -- esr)
13674 # From: greg small <gts@populi.berkeley.edu> 3-17-85
13675 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
13677 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
13678 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
13679 \sIBM\sPC\s3-17-85\n,
13680 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
13681 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13682 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
13683 # This was designed for a VT320 emulator, but it is probably a good start
13684 # at support for the VT320 itself.
13685 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
13686 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
13687 vt320-k3|MS-Kermit 3.00's VT320 emulation,
13688 am, eslok, hs, km, mir, msgr, xenl,
13689 cols#80, it#8, lines#49, pb#9600, vt#3,
13690 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13691 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cmdch=\E,
13692 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13693 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13694 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13695 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13696 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
13697 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
13699 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13700 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13701 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
13702 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
13703 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13704 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
13705 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
13706 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
13707 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
13708 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
13709 \E[4i\E[?4i\E[m\E[r\E[2$~,
13710 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
13711 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13712 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=vt220+cvis,
13714 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
13715 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
13716 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
13717 vt320-k311|DEC VT320 series as defined by kermit 3.11,
13718 am, eslok, hs, mir, msgr, xenl, xon,
13719 cols#80, it#8, lines#24, vt#3,
13720 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13721 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r,
13722 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13723 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13724 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13725 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13726 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
13727 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
13728 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
13730 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
13731 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13732 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
13733 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
13734 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
13735 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
13736 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
13737 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
13738 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
13739 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
13742 ######## NON-ANSI TERMINAL EMULATIONS
13747 # These entries attempt to describe Avatar, a terminal emulation used with
13748 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
13749 # capabilities, but with cheaper (shorter) control sequences. Messy design,
13750 # excessively dependent on PC idiosyncrasies, but apparently rather popular
13751 # in the BBS world.
13753 # No color support. Avatar doesn't fit either of the Tektronix or HP color
13754 # models that terminfo knows about. An Avatar color attribute is the
13755 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
13757 # I wrote these entries while looking at the Avatar spec. I don't have
13758 # the facilities to test them. Let me know if they work, or don't.
13760 # Avatar escapes not used by these entries (because maybe you're smarter
13761 # and more motivated than I am and can figure out how to wrap terminfo
13762 # around some of them, and because they are weird enough to be funny):
13764 # ^L -- clear window/reset current attribute to default
13765 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
13767 # bit: 6 5 4 3 2 1 0
13769 # +---+---+ | +---+---+
13771 # | | foreground color
13772 # | foreground intensity
13775 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
13776 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
13777 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
13778 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
13779 # (^V^L and ^V^M set the current attribute as a side-effect.)
13780 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
13781 # in the pattern, <c> the number of times the pattern
13782 # should be repeated. If either value is 0, no-op.
13783 # The pattern can contain Avatar console codes,
13784 # including other ^V ^Y patterns.
13786 # ^V^O -- clockwise mode on; turn print direction right each time you
13787 # hit a window edge (yes, really). Turned off by CR
13789 # ^V^Q%c -- query the driver
13790 # ^V^R -- driver reset
13791 # ^V^S -- Sound tone (PC-specific)
13792 # ^V^T -- change highlight at current cursor position to %c
13793 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
13794 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
13797 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13798 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
13799 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
13800 # which is the only method that will actually work for multiple highlights.)
13802 # Update by TD - 2004: half of this was inconsistent. Found documentation
13803 # and repaired most of the damage. sgr0 is probably incorrect, but the
13804 # available documentation gives no clues for a workable string.
13805 avatar0|avatar terminal emulator level 0,
13807 cols#80, it#8, lines#25,
13808 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
13809 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
13810 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
13812 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
13813 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
13814 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
13815 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
13817 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13818 avatar0+|avatar terminal emulator level 0+,
13819 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
13820 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
13821 avatar|avatar1|avatar terminal emulator level 1,
13822 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
13823 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
13827 # RBComm is a lean and mean terminal emulator written by the Interrupt List
13828 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
13829 # '90s), especially in the BBS world, and still has some loyal users due to
13830 # its very small memory footprint and to a cute macro language.
13831 rbcomm|IBM PC with RBcomm and EMACS keybindings,
13832 am, bw, mir, msgr, xenl,
13833 cols#80, it#8, lines#25,
13834 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r,
13835 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B,
13836 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
13837 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
13838 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
13839 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
13840 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
13841 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
13842 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
13843 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
13844 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
13846 rbcomm-nam|IBM PC with RBcomm without autowrap,
13848 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13849 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
13850 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13851 rbcomm-w|IBM PC with RBcomm in 132 column mode,
13853 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
13854 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
13855 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
13857 ######## LCD DISPLAYS
13860 #### Matrix Orbital
13861 # from: Eric Z. Ayers (eric@ale.org)
13863 # Matrix Orbital 20x4 LCD display
13864 # Command Character is 0xFE (decimal 254, octal 376)
13866 # On this device, cursor addressability isn't possible. The LCD expects:
13867 # 0xfe G <col> <row>
13868 # for cup: %p1 == row and %p2 is column
13871 # cup=\376G%p2%c%p1%c
13872 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
13873 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
13875 # Alas, there is no cursor upline capability on this display.
13877 # These entries add some 'sanity stuff' to the clear function. That is, it
13878 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
13879 # and turns off the cursor blinking and stuff like that.
13881 # NOTE: calling 'beep' turns on the backlight (bell)
13882 # NOTE: calling 'flash' turns it on and back off (visual bell)
13884 MtxOrb|generic Matrix Orbital LCD display,
13885 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
13886 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
13887 flash=\376B\001$<200>\376F, home=\376H,
13888 MtxOrb204|20x4 Matrix Orbital LCD display,
13889 cols#20, lines#4, use=MtxOrb,
13890 MtxOrb162|16x2 Matrix Orbital LCD display,
13891 cols#16, lines#2, use=MtxOrb,
13894 ######## OLDER TERMINAL TYPES
13896 # This section is devoted to older commercial terminal brands that are now
13897 # discontinued, but known to be still in use or represented by emulations.
13900 #### AT&T (att, tty)
13902 # This section also includes Teletype-branded VDTs.
13904 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
13905 # Boundless Technologies); for details, see the header comment on the ADDS
13908 # These are AT&T's official terminfo entries. All-caps aliases have been
13911 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
13912 am, eo, mir, msgr, xon,
13913 cols#80, it#8, lines#24,
13914 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
13915 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13916 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13917 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13918 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13919 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
13920 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13921 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
13922 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
13923 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
13924 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
13925 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13926 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
13927 smso=\E[7m, use=ansi+cpr,
13928 att2350|AT&T 2350 Video Information Terminal 80 column mode,
13929 mc0@, mc4@, mc5@, use=att2300,
13931 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
13932 # Seems upward compatible with VT100, plus ins/del line/char.
13933 # On sgr, the protection parameter is ignored.
13934 # No check is made to make sure that only 3 parameters are output.
13935 # standout= reverse + half-intensity = 3 | 5.
13936 # bold= reverse + underline = 2 | 3.
13937 # note that half-bright blinking doesn't look different from normal blinking.
13938 # NOTE:you must program the function keys first, label second!
13939 # (att4410: a BSD entry has been seen with the following capabilities:
13940 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
13941 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
13942 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
13943 am, hs, mir, msgr, xon,
13944 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13945 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
13947 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
13948 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
13949 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
13950 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
13951 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
13952 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
13953 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
13954 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
13955 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
13956 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
13957 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
13959 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13960 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
13961 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
13962 ll=\E[24H, nel=\r\n,
13963 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
13965 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13966 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13968 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13969 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13970 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13971 tsl=\E7\E[25;%p1%{1}%+%dH,
13973 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
13975 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
13977 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
13979 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
13982 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
13984 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
13986 # 5410 in terms of a VT100
13987 # (v5410: added <rmam>/<smam> based on init string -- esr)
13988 v5410|att5410 in terms of a VT100,
13989 am, mir, msgr, xon,
13990 cols#80, it#8, lines#24, vt#3,
13991 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13992 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13993 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13994 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
13995 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
13996 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
13997 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
13998 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13999 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
14000 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
14001 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
14003 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
14004 %;m%?%p9%t\016%e\017%;$<2>,
14005 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
14006 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
14007 use=decid+cpr, use=vt100+fnkeys,
14010 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
14011 # even! the 5420 has three modes: scroll, window or page mode
14012 # this terminfo should work in scroll or window mode, but doesn't
14013 # take advantage of any of the differences between them.
14015 # Has memory below (2 lines!)
14016 # 3 pages of memory (plus some spare)
14017 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
14018 # <hpa>, <hts> would work for these, but these work in both scroll and window
14019 # mode... Unset insert character so insert mode works
14020 # <is1> sets 80 column mode,
14021 # <is2> escape sequence:
14022 # 1) turn off all fonts
14023 # 2) function keys off, keyboard lock off, control display off,
14024 # insert mode off, erasure mode off,
14025 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
14026 # 4) reset origin mode
14027 # 5) set line wraparound
14028 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
14030 # 8) program ENTER to transmit ^J,
14031 # We use \212 to program the ^J because a bare ^J will get translated by
14032 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
14034 # <is3> set screen color to black,
14035 # No representation in terminfo for the delete word key: kdw1=\Ed
14036 # Key capabilities assume the power-up send sequence...
14037 # This <rmcup> is not strictly necessary, but it helps maximize
14038 # memory usefulness: <rmcup=\Ez>,
14039 # Alternate sgr0: <sgr0=\E[m\EW^O>,
14040 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
14041 # smkx programs the SYS PF keys to send a set sequence.
14042 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
14043 # This string causes them to send the strings <kf1>-<kf8>
14044 # when pressed in SYS PF mode.
14045 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
14046 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
14047 OTbs, db, mir, xon,
14048 lh#2, lm#78, lw#8, nlab#8, wsl#55,
14049 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
14050 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
14051 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
14052 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
14053 flash=\E[?5h$<200>\E[?5l, home=\E[x,
14054 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
14055 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
14056 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
14057 \E[4i\Ex\E[21;1j\212,
14058 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
14059 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
14060 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
14061 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
14062 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
14063 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
14064 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
14065 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
14066 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
14067 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
14068 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
14069 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14070 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
14071 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
14072 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
14073 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
14076 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
14077 cols#132, lm#54, wsl#97,
14078 is1=\E[?3h$<100>, use=att4415,
14080 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
14081 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
14083 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
14084 cols#132, lm#54, wsl#97,
14085 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
14088 # Note that this mode permits programming USER PF KEYS and labels
14089 # However, when you program user pf labels you have to reselect
14090 # user pf keys to make them appear!
14091 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
14092 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
14093 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14095 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
14097 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
14098 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
14101 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
14102 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
14105 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
14106 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
14109 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
14110 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
14113 att5420_2|AT&T 5420 model 2 80 cols,
14114 am, db, hs, mir, msgr, xon,
14115 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
14116 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14117 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
14118 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14119 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
14120 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
14121 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14122 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
14123 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
14124 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
14125 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
14126 indn=\E[%p1%dE, invis=\E[8m,
14127 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
14128 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
14130 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
14131 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
14132 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
14133 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
14134 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
14135 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
14136 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
14137 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
14138 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
14140 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
14141 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
14142 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
14144 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
14145 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
14146 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
14147 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14148 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
14150 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
14152 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
14153 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
14157 att4418|att5418|AT&T 5418 80 cols,
14160 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14161 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
14162 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
14163 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
14164 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
14165 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
14166 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
14167 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
14168 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
14169 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
14170 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
14171 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
14172 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
14173 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
14174 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
14175 att4418-w|att5418-w|AT&T 5418 132 cols,
14177 is1=\E[?3h, use=att5418,
14179 att4420|tty4420|Teletype 4420,
14180 OTbs, da, db, eo, msgr, ul, xon,
14181 cols#80, lines#24, lm#72,
14182 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
14183 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14184 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
14185 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
14186 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
14187 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
14188 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
14189 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
14191 # The following is a terminfo entry for the Teletype 4424
14192 # asynchronous keyboard-display terminal. It supports
14193 # the vi editor. The terminal must be set up as follows,
14195 # HIGHLIGHT DEFINITION 3-TONE
14196 # DISPLAY FUNCTION GROUP III
14198 # The second entry below provides limited (a la adm3a)
14199 # operation under GROUP II.
14201 # This must be used with DISPLAY FUNCTION GROUP I or III
14202 # and HIGHLIGHT DEFINITION 3-TONE
14203 # The terminal has either bold or blink, depending on options
14205 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
14206 att4424|tty4424|Teletype 4424,
14209 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14210 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
14211 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14212 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
14213 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
14214 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
14215 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14216 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
14217 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14218 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
14219 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
14221 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
14222 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
14223 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
14226 att4424-1|tty4424-1|Teletype 4424 in display function group I,
14227 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
14230 # This entry is not one of AT&T's official ones, it was translated from the
14231 # 4.4BSD termcap file. The highlight strings are different from att4424.
14232 # I have no idea why this is -- older firmware version, maybe?
14233 # The following two lines are the comment originally attached to the entry:
14234 # This entry appears to avoid the top line - I have no idea why.
14235 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
14236 att4424m|tty4424m|Teletype 4424M,
14238 cols#80, it#8, lines#23,
14239 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
14240 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
14241 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
14242 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
14243 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14244 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
14245 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14247 # The Teletype 5425 is really version 2 of the Teletype 5420. It
14248 # is quite similar, except for some minor differences. No page
14249 # mode, for example, so all of the <cup> sequences used above have
14250 # to change back to what's being used for the 5410. Many of the
14251 # option settings have changed their numbering as well.
14253 # This has been tested on a preliminary model.
14255 # (att5425: added <rmam>/<smam> based on the init string -- esr)
14256 att5425|tty5425|att4425|AT&T 4425/5425,
14257 am, da, db, hs, mir, msgr, xenl, xon,
14258 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
14259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14260 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14261 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
14262 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14263 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14264 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14265 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14266 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
14267 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
14268 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
14269 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14270 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
14271 invis=\E[8m, is1=\E<\E[?3l$<100>,
14272 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
14273 \E[4i\Ex\E[25;1j\212,
14274 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
14275 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14276 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
14277 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
14278 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
14279 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
14281 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14282 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
14283 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
14284 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
14285 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
14286 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14287 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
14288 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14289 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
14290 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
14291 vpa=\E[%p1%{1}%+%dd, use=decid+cpr,
14293 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
14294 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
14296 att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode,
14297 cols#132, lm#54, wsl#97,
14298 is1=\E[?3h$<100>, use=tty5425,
14300 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
14301 # I also added <rmam>/<smam> -- esr)
14302 att4426|tty4426|Teletype 4426S,
14304 cols#80, lines#24, lm#48,
14305 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14306 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
14307 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
14308 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14309 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
14310 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
14311 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
14312 il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h,
14313 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
14314 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ,
14315 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
14316 khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8,
14317 rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
14318 rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
14319 smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
14320 vpa=\E[%p1%dd, use=ecma+index,
14322 # Terminfo entry for the AT&T 510 A Personal Terminal
14323 # Function keys 9 - 16 are available only after the
14324 # screen labeled (soft keys/action blocks) are labeled. Function key
14325 # 9 corresponds to the leftmost touch target on the screen,
14326 # function key 16 corresponds to the rightmost.
14328 # This entry is based on one done by Ernie Rice at Summit, NJ and
14329 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
14330 att510a|bct510a|AT&T 510A Personal Terminal,
14331 am, mir, msgr, xenl, xon,
14332 cols#80, lh#2, lines#24, lw#7, nlab#8,
14333 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14334 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14335 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
14336 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14337 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14338 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
14339 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
14340 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
14341 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
14342 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
14343 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
14344 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
14345 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
14346 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
14347 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
14348 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14349 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
14350 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14351 %|%t;7%;m%?%p9%t\016%e\017%;,
14352 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
14353 smul=\E[4m, tbc=\E[3g, use=ansi+cpr,
14355 # Terminfo entry for the AT&T 510 D Personal Terminal
14356 # Function keys 9 through 16 are accessed by bringing up the
14358 # Function key 9 corresponds to the leftmost touch target on the screen,
14359 # function key 16 corresponds to the rightmost.
14361 # There are problems with soft key labeling. These are due to
14362 # strangenesses in the native terminal that are impossible to
14363 # describe in a terminfo.
14364 att510d|bct510d|AT&T 510D Personal Terminal,
14365 am, da, db, mir, msgr, xenl, xon,
14366 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
14367 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14368 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14369 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
14370 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
14371 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
14372 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
14373 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
14374 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
14375 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14376 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14377 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
14378 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
14379 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
14380 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
14381 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
14382 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
14383 mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE,
14384 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14385 rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m,
14386 rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
14387 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
14388 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14389 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
14390 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
14391 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
14392 use=ansi+cpr, use=ansi+rep, use=ecma+index,
14394 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
14395 att500|att513|AT&T 513 using page mode,
14396 am, chts, mir, msgr, xenl, xon,
14397 cols#80, lh#2, lines#24, lw#8, nlab#8,
14398 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
14399 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
14400 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
14401 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14402 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14403 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14404 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
14405 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14406 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
14407 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
14408 indn=\E[%p1%dE, invis=\E[8m,
14409 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
14410 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14411 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14412 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
14413 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
14414 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
14415 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
14416 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
14417 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14418 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
14419 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
14420 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
14421 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
14422 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14423 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14424 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
14425 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
14426 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
14428 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14430 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
14432 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
14433 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
14434 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
14435 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
14437 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
14438 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
14439 rs2=\E[5;0|, sc=\E7,
14440 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14441 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14442 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
14443 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
14444 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
14445 use=decid+cpr, use=ansi+rep,
14448 # printer must be set to EMUL ANSI to accept ESC codes
14449 # <cuu1> stops at top margin
14450 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
14451 # and alt font ascii,wrap on,tabs cleared
14452 # <is2> disables newline on LF,Emphasized off
14453 # The <u0> capability sets form length
14454 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
14456 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
14457 orhi#100, orl#12, orvi#72,
14458 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
14459 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
14460 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
14463 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
14464 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
14465 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
14466 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
14467 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
14468 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
14470 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
14471 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
14472 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
14473 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
14475 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
14476 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
14477 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
14478 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
14479 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
14481 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
14482 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
14483 u0=\E[%p1%dt, vpa=\E[%p1%dd,
14485 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
14486 # The following SET-UP modes are assumed for normal operation:
14487 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
14488 # Other SET-UP modes may be set for operator convenience or communication
14489 # requirements. This termcap description is for the Resident Terminal Mode.
14490 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14491 # The BRL entry also said: UNSAFE :ll=\E[70H:
14492 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
14494 cols#88, it#8, lines#70, vt#3,
14495 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
14496 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
14497 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
14498 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
14499 il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
14500 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n,
14501 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index,
14503 # 5620 terminfo (2.0 or later ROMS with char attributes)
14504 # The following SET-UP modes are assumed for normal operation:
14505 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
14506 # Other SET-UP modes may be set for operator convenience or communication
14507 # requirements. This termcap description is for Resident Terminal Mode. No
14508 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14509 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
14510 # Be aware that older versions of the dmd have a firmware bug that affects
14511 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
14512 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
14513 # also has <ll>=\E[70H commented out and marked unsafe.
14514 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
14515 att5620|dmd|tty5620|ttydmd|5620|AT&T 5620 terminal 88 columns,
14516 OTbs, am, msgr, npc, xon,
14517 cols#88, it#8, lines#70,
14518 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
14519 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14520 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
14521 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
14522 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H,
14523 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14524 khome=\E[H, kll=\E[70;1H, nel=\n,
14525 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
14526 rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
14527 smso=\E[7m, smul=\E[4m, use=ecma+index,
14528 att5620-24|tty5620-24|dmd-24|Teletype dmd 5620 in a 24x80 layer,
14529 lines#24, use=att5620,
14530 att5620-34|tty5620-34|dmd-34|Teletype dmd 5620 in a 34x80 layer,
14531 lines#34, use=att5620,
14532 # 5620 layer running the "S" system's downloaded graphics handler:
14533 att5620-s|tty5620-s|layer|vitty|AT&T 5620 S layer,
14535 cols#80, it#8, lines#72,
14536 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
14537 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
14538 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
14539 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
14542 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
14544 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
14545 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
14546 att605|AT&T 605 80 column 102key keyboard,
14548 cols#80, lines#24, lw#8, nlab#8, wsl#80,
14549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14550 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14551 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14552 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
14553 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
14554 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14555 il1=\E[L, ind=\n, invis=\E[8m,
14556 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
14557 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
14558 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14559 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
14560 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
14561 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
14562 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
14563 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
14564 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
14565 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
14566 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
14567 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
14568 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
14569 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
14570 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14571 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14572 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14573 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
14574 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
14575 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14576 tsl=\E7\E[25;%i%p1%dx, use=ansi+cpr,
14577 att605-pc|AT&T 605 in pc term mode,
14578 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
14580 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
14581 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
14582 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
14583 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
14584 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
14585 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
14586 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
14587 xoffc=g, xonc=e, use=att605,
14588 att605-w|AT&T 605-w 132 column 102 key keyboard,
14590 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
14591 # (att610: I added <rmam>/<smam> based on the init string. I also
14592 # added <indn> and <rin> because the BSD file says the att615s have them,
14593 # and the 615 is like a 610 with a big keyboard, and most of their other
14594 # smart terminals support the same sequence -- esr)
14595 att610|AT&T 610; 80 column; 98key keyboard,
14596 am, eslok, hs, mir, msgr, xenl, xon,
14597 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14598 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14599 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14600 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14601 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14602 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14603 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14604 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14605 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14606 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14608 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
14609 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14610 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14611 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14612 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
14613 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14614 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
14616 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14617 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14618 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
14619 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14620 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14621 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14622 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14623 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
14624 use=decid+cpr, use=ecma+index, use=att610+cvis,
14625 att610-w|AT&T 610; 132 column; 98key keyboard,
14627 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14630 att610-103k|AT&T 610; 80 column; 103key keyboard,
14631 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14632 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14633 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14634 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14635 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14636 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14637 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14638 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
14639 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
14640 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
14641 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
14642 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
14643 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
14644 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
14646 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14648 att615|AT&T 615; 80 column; 98key keyboard,
14649 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14650 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14651 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14652 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14653 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14654 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14655 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
14656 att615-w|AT&T 615; 132 column; 98key keyboard,
14657 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14658 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
14659 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
14660 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
14661 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
14662 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14663 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
14664 att615-103k|AT&T 615; 80 column; 103key keyboard,
14665 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
14666 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
14667 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
14668 # (att620: I added <rmam>/<smam> based on the init string and
14669 # <rin>/<indn> from a BSD termcap -- esr)
14670 att620|AT&T 620; 80 column; 98key keyboard,
14671 am, eslok, hs, mir, msgr, xenl, xon,
14672 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14673 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14674 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14675 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14676 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14677 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14678 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14679 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14680 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
14681 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14683 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
14684 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
14685 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14686 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14687 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
14688 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
14689 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
14690 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
14691 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
14692 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
14693 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
14694 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
14695 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
14696 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14697 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
14698 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14699 ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l,
14700 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
14701 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14702 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
14703 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
14704 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
14705 tsl=\E7\E[25;%i%p1%dx, use=decid+cpr, use=ecma+index,
14707 att620-w|AT&T 620; 132 column; 98key keyboard,
14709 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14711 att620-103k|AT&T 620; 80 column; 103key keyboard,
14712 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
14713 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
14714 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
14715 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
14716 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
14717 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
14718 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
14719 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
14720 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
14721 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
14722 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
14723 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
14724 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
14725 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
14726 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
14727 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
14729 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
14731 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
14734 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
14735 # The following SETUP modes are assumed for normal operation:
14736 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
14737 # Font_Size=Large Non-Layers_Window_Cols=80
14738 # Non-Layers_Window_Rows=60
14739 # Other SETUP modes may be set for operator convenience or communication
14740 # requirements. Some capabilities assume a printer attached to the Aux EIA
14741 # port. This termcap description is for the Fixed Non-Layers Window. No
14742 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
14743 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
14744 att630|AT&T 630 windowing terminal,
14745 OTbs, am, da, db, mir, msgr, npc, xon,
14746 cols#80, it#8, lines#60, lm#0,
14747 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
14748 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14749 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14750 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14751 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
14752 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
14753 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z,
14754 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14755 kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq,
14756 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
14757 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{,
14758 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H,
14759 kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
14760 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
14761 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
14762 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
14764 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14765 use=ansi+cpr, use=ecma+index,
14766 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
14767 lines#24, use=att630,
14769 # This is the att700 entry for 700 native emulation of the AT&T 700
14770 # terminal. Comments are relative to changes from the 605V2 entry and
14771 # att730 on which the entry is based. Comments show the terminfo
14772 # capability name, termcap name, and description.
14774 # Here is what's going onm in the init string:
14775 # ESC [ 50;4| set 700 native mode (really is 605)
14776 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
14777 # ESC [ 53;0| set GenFlow to Xon/Xoff
14778 # ESC [ 8 ;0| set CR on NL
14779 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
14780 # ESC [ ? 4 l jump scroll
14781 # ESC [ ? 5 l/h video: normal (l); reverse (h)
14782 # ESC [ ?13 l Labels on
14783 # ESC [ ?15 l parity check = no
14784 # ESC [ 13 l monitor mode off
14785 # ESC [ 20 l LF on NL (not CRLF on NL)
14786 # ESC [ ? 7 h autowrap on
14787 # ESC [ 12 h local echo off
14788 # ESC ( B GO = ASCII
14789 # ESC ) 0 G1 = Special Char & Line Drawing
14790 # ESC [ ? 31 l Set 7 bit controls
14792 # Note: Most terminals, especially the 600 family use Reverse Video for
14793 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
14794 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
14795 # standout mode with \E[m (all normal attributes). The 730 entry simply
14796 # exits reverse video which would leave other current attributes intact. It
14797 # was assumed the 730 entry to be more correct so rmso has changed. The
14798 # 605V2 has no sequences to turn individual attributes off, thus its setting
14799 # and the rmso/smso settings from the 730.
14801 # Note: For the same reason as above in rmso I changed exit under-score mode
14802 # to specifically turn off underscore, rather than return to all normal
14805 # Note: The following pkey_xmit is taken from the 605V2 which contained the
14806 # capability as pfxl. It was changed here to pfx since pfxl
14807 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
14808 # allows strings to be parameters and label values must be programmed as
14809 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
14810 # and strings to be parameters. The 605V2 pfx entry should be examined later
14811 # in this regard. For reference the 730 pfxl entry is shown here for comparison
14813 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
14814 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14817 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14820 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
14822 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
14826 # modular 10 pin Connector
14827 # Left side Right side
14828 # Pin 1 2 3 4 5 6 7 8 9 10
14830 # Key (notch) at bottom
14842 # The manual is 189 pages and is loaded with details about the escape codes,
14843 # etc..... Available from AT&T CIC 800-432-6600...
14844 # ask for Document number 999-300-660..
14846 att700|AT&T 700 24x80 column display w/102key keyboard,
14847 am, eslok, hs, mir, msgr, xenl, xon,
14848 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
14849 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14850 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14851 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14852 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14853 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14854 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14855 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14856 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
14857 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14858 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
14859 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
14860 \E(B\E)0\E[?31l\E[0m\017,
14861 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
14862 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14863 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
14864 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
14865 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
14866 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
14867 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
14868 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
14869 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
14870 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
14871 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
14872 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14873 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
14874 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14875 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
14876 \s\s\s\s\s\s%;%p2%s,
14877 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14878 ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m,
14879 rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
14881 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14882 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14883 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
14884 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
14885 tsl=\E7\E[99;%i%p1%dx, use=decid+cpr, use=ansi+rep,
14888 # This entry was modified 3/13/90 by JWE.
14889 # fixes include additions of <enacs>, correcting <rep>, and modification
14890 # of <kHOM>. (See comments below)
14891 # att730 has status line of 80 chars
14892 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
14893 # the <kf25> and up keys are used for shifted system Fkeys
14894 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
14895 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
14896 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
14897 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
14898 # 102, 102+1, or 122 key keyboards
14900 # (att730: I added <rmam>/<smam> based on the init string -- esr)
14901 att730|AT&T 730 windowing terminal,
14902 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
14903 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
14904 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14905 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14906 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14907 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14908 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14909 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14910 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
14911 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
14912 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
14913 ind=\ED, invis=\E[8m,
14914 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
14915 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
14916 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14917 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
14918 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
14919 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
14920 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
14921 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
14922 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
14923 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
14924 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
14925 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
14926 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
14927 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
14928 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
14929 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
14930 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
14931 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
14932 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
14933 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h,
14934 rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
14936 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
14937 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14938 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
14939 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
14940 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=decid+cpr,
14941 use=ansi+rep, use=att610+cvis,
14942 # "MGT" is "Multi-Tasking Graphics Terminal"
14943 att730-41|730MTG-41|AT&T 730-41 windowing terminal,
14944 lines#41, use=att730,
14945 att730-24|730MTG-24|AT&T 730-24 windowing terminal,
14946 lines#24, use=att730,
14947 att730r|730MTGr|AT&T 730 rev video windowing terminal,
14948 flash=\E[?5l$<200>\E[?5h,
14949 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
14950 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal,
14951 lines#41, use=att730r,
14952 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal,
14953 lines#24, use=att730r,
14955 # The following represents the screen layout along with the associated
14956 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
14957 # not appear on the screen but are shown to reference the bezel buttons.
14958 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
14959 # position relative to the screen.
14963 # +----------------------------------------------------------------+
14965 # XXXX | kf0 kf24 | XXXX
14968 # XXXX | kf1 kf23 | XXXX
14971 # XXXX | kf2 kf22 | XXXX
14974 # XXXX | kf3 kf21 | XXXX
14977 # XXXX | kf4 kf20 | XXXX
14980 # XXXX | kf5 kf19 | XXXX
14983 # XXXX | kf6 kf18 | XXXX
14989 # +----------------------------------------------------------------+
14991 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
14993 # Note: XXXX represents the screen buttons
14999 # The character string sent by key 'kf26' may be user programmable
15000 # to send either \E[16s, or \E[26s.
15001 # The character string sent by key 'krfr' may be user programmable
15002 # to send either \E[17s, or \E[27s.
15004 # Depression of the "CMD" key sends \E! (kcmd)
15005 # Depression of the "MAIL" key sends \E[26s (kf26)
15006 # "REDRAW" same as "REFRESH" (krfr)
15008 # "kf" functions adds carriage return to output string if terminal is in
15011 # The following are functions not covered in the table above:
15013 # Set keyboard character (SKC): \EPn1;Pn2w
15014 # Pn1= 0 Back Space key
15016 # Pn2= Program char (hex)
15018 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
15019 # Pn1= Window number (1-39)
15020 # Pn2-Pn5= Y;X;Y;X coordinates
15022 # Screen Selection (SSL): \E[Pnu
15023 # Pn= Window number
15025 # Set Terminal Modes (SM): \E[Pnh
15026 # Pn= 3 Graphics mode
15027 # Pn= > Cursor blink
15028 # Pn= < Enter new line mode
15029 # Pn= = Enter reverse insert/replace mode
15030 # Pn= ? Enter no scroll mode
15032 # Reset Terminal Mode (RM): \E[Pnl
15033 # Pn= 3 Exit graphics mode
15034 # Pn= > Exit cursor blink
15035 # Pn= < Exit new line mode
15036 # Pn= = Exit reverse insert/replace mode
15037 # Pn= ? Exit no scroll mode
15039 # Screen Status Report (SSR): \E[Pnp
15040 # Pn= 0 Request current window number
15041 # Pn= 1 Request current window dimensions
15043 # Device Status Report (DSR): \E[6n Request cursor position
15045 # Call Status Report (CSR): \E[Pnv
15046 # Pn= 0 Call failed
15047 # Pn= 1 Call successful
15049 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
15050 # Pn1= Button number to be loaded
15051 # Pn2= Character count of "string"
15052 # Pn3= Key mode being loaded:
15056 # String= Text string (15 chars max)
15058 # Screen Number Report (SNR): \E[Pnp
15059 # Pn= Screen number
15061 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
15062 # Pn1= Number of rows available in window
15063 # Pn2= Number of columns available in window
15065 # Cursor Position Report (CPR): \E[Pn1;Pn2R
15066 # Pn1= "Y" Position of cursor
15067 # Pn2= "X" Position of cursor
15069 # Request Answer Back (RAB): \E[c
15071 # Answer Back Response (ABR): \E[?;*;30;VSV
15072 # *= 0 No printer available
15073 # *= 2 Printer available
15074 # V= Software version number
15075 # SV= Software sub version number
15076 # (printer-available field not documented in v1)
15078 # Screen Alignment Aid: \En
15080 # Bell (lower pitch): \E[x
15082 # Dial Phone Number: \EPdstring\
15083 # string= Phone number to be dialed
15085 # Set Phone Labels: \EPpstring\
15086 # string= Label for phone buttons
15088 # Set Clock: \EPchour;minute;second\
15090 # Position Clock: \EPsY;X\
15091 # Y= "Y" coordinate
15092 # X= "X" coordinate
15094 # Delete Clock: \Epr\
15096 # Programming The Function Buttons: \EPfPn;string\
15097 # Pn= Button number (00-06, 18-24)
15098 # (kf00-kf06, kf18-kf24)
15099 # string= Text to sent on button depression
15101 # The following in version 2 only:
15103 # Request For Local Directory Data: \EPp12;\
15105 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
15107 # Request for Local Directory Data in print format: \EPp13;\
15109 # Enable 'Prt on Line' mode: \022 (DC2)
15111 # Disable 'Prt on Line' mode: \024 (DC4)
15115 # The following Terminfo entry describes functions which are supported by
15116 # the AT&T 5430/pt505 terminal software version 2 and later.
15117 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
15119 cols#80, it#8, lines#24,
15120 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15121 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
15122 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
15123 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15124 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15125 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15126 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
15127 il=\E[%p1%dL, il1=\E[L, ind=\n,
15128 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
15129 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
15130 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
15131 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
15132 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
15133 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
15134 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
15135 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
15136 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
15137 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
15140 # The following Terminfo entry describes functions which are supported by
15141 # the AT&T 5430/pt505 terminal software version 1.
15142 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
15144 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
15145 att505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
15146 lines#22, use=att505,
15148 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
15149 # This cut mark helps make life less painful for people running ncurses tic
15150 # on machines with relatively little RAM. The file can be broken in half here
15151 # cleanly and compiled in sections -- no `use' references cross this cut
15155 #### Ampex (Dialogue)
15157 # Yes, these are the same people who are better-known for making audio- and
15158 # videotape. I'm told they are located in Redwood City, CA.
15161 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
15162 # (ampex80: some capabilities merged in from SCO's entry -- esr)
15163 ampex80|a80|d80|dialogue|dialogue80|Ampex dialogue 80,
15165 cols#80, it#8, lines#24,
15166 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
15167 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15168 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
15169 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
15170 smso=\Ej, smul=\El, tbc=\E3,
15171 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
15172 ampex175|Ampex d175,
15175 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15176 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15177 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
15178 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
15179 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
15180 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
15181 # No backspace key in the main QWERTY cluster. Fortunately, it has a
15182 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
15183 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
15184 # mode), this key can be used as the erase key; I find I like this. Because
15185 # some people and some systems may not, there is another termcap ("ampex175")
15186 # that suppresses this little eccentricity by omitting the relevant capability.
15187 ampex175-b|Ampex d175 using left arrow for erase,
15188 kbs=^_, use=ampex175,
15189 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
15190 # (ampex210: removed obsolete ":kn#10:" -- esr)
15191 ampex210|a210|Ampex a210,
15192 OTbs, am, hs, xenl,
15193 cols#80, it#8, lines#24, xmc#1,
15194 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
15195 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15196 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
15197 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
15198 if=/usr/share/tabset/std, il1=\EE, invis@,
15199 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
15200 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
15201 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
15202 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
15203 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
15204 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
15205 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
15206 # and moved the padding to be *after* the caps -- esr)
15207 ampex219|ampex-219|amp219|Ampex with automargins,
15209 cols#80, it#8, lines#24,
15210 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
15211 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
15212 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
15213 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
15214 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
15215 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
15216 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15217 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
15218 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
15219 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
15220 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
15221 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
15222 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
15223 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
15224 cols#132, lines#24,
15225 bel=^G, cr=\r, cud1=\n, ind=\n,
15226 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
15227 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
15228 ampex232|ampex-232|Ampex Model 232,
15230 cols#80, lines#24, xmc#1,
15231 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
15232 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15233 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
15234 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
15235 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
15236 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
15237 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
15238 kf9=^AI\r, khome=^^, use=adm+sgr,
15239 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
15240 ampex232w|Ampex Model 232 / 132 columns,
15241 cols#132, lines#24,
15242 is2=\E\034Eg\El, use=ampex232,
15244 #### Ann Arbor (aa)
15246 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
15247 # numbers of function keys. At least some used monitors in portrait mode,
15248 # allowing up to 76-character screen heights! They were reachable at:
15250 # Ann Arbor Terminals
15251 # 6175 Jackson Road
15252 # Ann Arbor, MI 48103
15255 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
15256 # can't be found on the Web; I fear they're long dead. R.I.P.
15260 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
15261 # Highly modified 6/22 by Mike O'Brien.
15262 # split out into several for the various screen sizes by dave-yost@rand
15263 # Modifications made 3/82 by Mark Horton
15264 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
15265 # status line moved to top of screen, <flash> removed 5/82
15266 # Some unknown person at SCO then hacked the init strings to make them more
15269 # assumes the following setup:
15270 # A menu: 0000 1010 0001 0000
15271 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15272 # C menu: 56 66 0 0 9600 0110 1100
15273 # D menu: 0110 1001 1 0
15275 # Briefly, the settings are for the following modes:
15276 # (values are for bit set/clear with * indicating our preference
15277 # and the value used to test these termcaps)
15278 # Note that many of these settings are irrelevant to the terminfo
15279 # and are just set to the default mode of the terminal as shipped
15282 # A menu: 0000 1010 0001 0000
15283 # Block/underline cursor*
15284 # blinking/nonblinking cursor*
15285 # key click/no key click*
15286 # bell/no bell at column 72*
15288 # key pad is cursor control*/key pad is numeric
15289 # return and line feed/return for <cr> key *
15290 # repeat after .5 sec*/no repeat
15291 # repeat at 25/15 chars per sec. *
15293 # hold data until pause pressed/process data unless pause pressed*
15294 # slow scroll/no slow scroll*
15295 # Hold in area/don't hold in area*
15296 # functions keys have default*/function keys disabled on powerup
15298 # show/don't show position of cursor during page transmit*
15303 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
15304 # Baud rate (9600*)
15306 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
15307 # 1 stop bit*/2 stop bits
15308 # parity error detection off*/on
15310 # keyboard local/on line*
15311 # half/full duplex*
15312 # disable/do not disable keyboard after data transmission*
15314 # transmit entire page/stop transmission at cursor*
15315 # transfer/do not transfer protected characters*
15316 # transmit all characters/transmit only selected characters*
15317 # transmit all selected areas/transmit only 1 selected area*
15319 # transmit/do not transmit line separators to host*
15320 # transmit/do not transmit page tab stops tabs to host*
15321 # transmit/do not transmit column tab stop tabs to host*
15322 # transmit/do not transmit graphics control (underline,inverse..)*
15324 # enable*/disable auto XON/XOFF control
15325 # require/do not require receipt of a DC1 from host after each LF*
15326 # pause key acts as a meta key/pause key is pause*
15334 # XON character (17*)
15335 # XOFF character (19*)
15337 # C menu: 56 66 0 0 9600 0110 1100
15338 # number of lines to print data on (printer) (56*)
15340 # number of lines on a sheet of paper (printer) (66*)
15342 # left margin (printer) (0*)
15344 # number of pad chars on new line to printer (0*)
15346 # printer baud rate (9600*)
15348 # printer parity: 00=odd,01=even*,10=space,11=mark
15349 # printer stop bits: 2*/1
15350 # print/do not print guarded areas*
15352 # new line is: 01=LF,10=CR,11=CRLF*
15356 # D menu: 0110 1001 1 0
15357 # LF is newline/LF is down one line, same column*
15358 # wrap to preceding line if move left from col 1*/don't wrap
15359 # wrap to next line if move right from col 80*/don't wrap
15360 # backspace is/is not destructive*
15362 # display*/ignore DEL character
15363 # display will not/will scroll*
15364 # page/column tab stops*
15365 # erase everything*/erase unprotected only
15367 # editing extent: 0=display,1=line*,2=field,3=area
15372 annarbor4080|aa4080|Ann Arbor 4080,
15375 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
15376 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
15377 %{12}%+%;%{64}%+%c,
15378 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
15379 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
15381 # Strange Ann Arbor terminal from BRL
15382 aas1901|Ann Arbor K4080 w/S1901 mod,
15385 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
15386 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
15389 # If you're using the GNU termcap library, add
15390 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
15391 # to these capabilities. This is the nonstandard GNU termcap scrolling
15392 # capability, arguments are:
15393 # 1. Total number of lines on the screen.
15394 # 2. Number of lines above desired scroll region.
15395 # 3. Number of lines below (outside of) desired scroll region.
15396 # 4. Total number of lines on the screen, the same as the first parameter.
15397 # The generic Ann Arbor entry is the only one that uses this.
15398 aaa+unk|aaa-unk|Ann Arbor Ambassador (internal - don't use this directly),
15399 OTbs, am, km, mc5i, mir, xon,
15401 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15402 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
15403 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
15404 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15405 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
15406 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
15407 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
15408 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
15409 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
15410 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15411 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
15412 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
15413 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
15414 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
15415 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
15416 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
15417 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m,
15418 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
15420 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
15421 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15424 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
15426 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15427 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
15429 aaa+rv|Ann Arbor Ambassador in reverse video,
15430 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
15431 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15432 rs1=\E[H\E[7m\E[J$<156>,
15433 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7
15434 ;%;%?%p7%t8;%;m\016,
15435 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
15436 # Ambassador with the DEC option, for partial VT100 compatibility.
15437 aaa+dec|Ann Arbor Ambassador in DEC VT100 mode,
15438 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
15439 csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O,
15440 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
15441 %p7%t8;%;m%?%p9%t\016%e\017%;,
15443 aaa-18|Ann Arbor Ambassador/18 lines,
15445 is2=\E7\E[60;0;0;18p\E8,
15446 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
15448 aaa-18-rv|Ann Arbor Ambassador/18 lines+reverse video,
15449 use=aaa+rv, use=aaa-18,
15450 aaa-20|Ann Arbor Ambassador/20 lines,
15452 is2=\E7\E[60;0;0;20p\E8,
15453 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
15455 aaa-22|Ann Arbor Ambassador/22 lines,
15457 is2=\E7\E[60;0;0;22p\E8,
15458 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
15460 aaa-24|Ann Arbor Ambassador/24 lines,
15462 is2=\E7\E[60;0;0;24p\E8,
15463 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
15465 aaa-24-rv|Ann Arbor Ambassador/24 lines+reverse video,
15466 use=aaa+rv, use=aaa-24,
15467 aaa-26|Ann Arbor Ambassador/26 lines,
15469 is2=\E7\E[60;0;0;26p\E8,
15470 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
15471 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
15472 aaa-28|Ann Arbor Ambassador/28 lines,
15474 is2=\E7\E[60;0;0;28p\E8,
15475 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
15476 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
15477 aaa-30-s|aaa-s|Ann Arbor Ambassador/30 lines w/status,
15480 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15481 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
15482 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
15483 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
15484 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15485 aaa-30-s-rv|aaa-s-rv|Ann Arbor Ambassador/30 lines+status+reverse video,
15486 use=aaa+rv, use=aaa-30-s,
15487 aaa-s-ctxt|aaa-30-s-ctxt|Ann Arbor Ambassador/30 lines+status+save context,
15488 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15489 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
15490 aaa-s-rv-ctxt|aaa-30-s-rv-ct|Ann Arbor Ambassador/30 lines+status+save context+reverse video,
15491 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
15492 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
15493 aaa|aaa-30|ambas|ambassador|Ann Arbor Ambassador/30 lines,
15495 is2=\E7\E[60;0;0;30p\E8,
15496 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
15497 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
15498 aaa-30-rv|aaa-rv|Ann Arbor Ambassador/30 lines in reverse video,
15499 use=aaa+rv, use=aaa-30,
15500 aaa-30-ctxt|aaa-ctxt|Ann Arbor Ambassador/30 lines; saving context,
15501 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15503 aaa-30-rv-ctxt|aaa-rv-ctxt|Ann Arbor Ambassador/30 lines reverse video; saving context,
15504 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
15505 use=aaa+rv, use=aaa-30,
15506 aaa-36|Ann Arbor Ambassador/36 lines,
15508 is2=\E7\E[60;0;0;36p\E8,
15509 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
15510 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
15511 aaa-36-rv|Ann Arbor Ambassador/36 lines+reverse video,
15512 use=aaa+rv, use=aaa-36,
15513 aaa-40|Ann Arbor Ambassador/40 lines,
15515 is2=\E7\E[60;0;0;40p\E8,
15516 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
15517 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
15518 aaa-40-rv|Ann Arbor Ambassador/40 lines+reverse video,
15519 use=aaa+rv, use=aaa-40,
15520 aaa-48|Ann Arbor Ambassador/48 lines,
15522 is2=\E7\E[60;0;0;48p\E8,
15523 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
15524 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
15525 aaa-48-rv|Ann Arbor Ambassador/48 lines+reverse video,
15526 use=aaa+rv, use=aaa-48,
15527 aaa-60-s|Ann Arbor Ambassador/59 lines+status,
15530 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
15531 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
15532 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
15533 aaa-60-s-rv|Ann Arbor Ambassador/59 lines+status+reverse video,
15534 use=aaa+rv, use=aaa-60-s,
15535 aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video,
15536 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
15537 aaa-60|Ann Arbor Ambassador/60 lines,
15539 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
15541 aaa-60-rv|Ann Arbor Ambassador/60 lines+reverse video,
15542 use=aaa+rv, use=aaa-60,
15543 aaa-db|Ann Arbor Ambassador 30/destructive backspace,
15545 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
15547 guru|guru-33|guru+unk|Ann Arbor guru/33 lines 80 cols,
15549 flash=\E[>59h$<100>\E[>59l,
15550 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
15551 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
15552 guru+rv|guru changes for reverse video,
15553 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
15554 guru-rv|guru-33-rv|Ann Arbor guru/33 lines+reverse video,
15555 use=guru+rv, use=guru-33,
15556 guru+s|guru status line,
15558 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
15559 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
15560 tsl=\E[>51h\E[1;%p1%dH\E[2K,
15561 guru-nctxt|guru with no saved context,
15562 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
15563 guru-s|guru-33-s|Ann Arbor guru/33 lines+status,
15565 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
15566 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15567 guru-24|Ann Arbor guru 24 lines,
15569 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
15571 guru-44|Ann Arbor guru 44 lines,
15573 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
15575 guru-44-s|Ann Arbor guru/44 lines+status,
15577 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
15578 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15579 guru-76|guru with 76 lines by 89 cols,
15581 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
15583 guru-76-s|Ann Arbor guru/76 lines+status,
15585 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
15586 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15587 guru-76-lp|guru-lp|guru with page bigger than line printer,
15588 cols#134, lines#76,
15589 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
15591 guru-76-w|guru 76 lines by 178 cols,
15592 cols#178, lines#76,
15593 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
15595 guru-76-w-s|Ann Arbor guru/76 lines+status+wide,
15596 cols#178, lines#75,
15597 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
15598 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
15599 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
15600 cols#178, lines#76,
15601 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
15603 aaa-rv-unk|Ann Arbor unknown type,
15604 lh#0, lw#0, nlab#0,
15605 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
15606 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
15608 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
15610 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
15612 #### Applied Digital Data Systems (adds)
15614 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
15615 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
15616 # terminals was merged again. Then AT&T sold the terminal business to
15617 # SunRiver, which later changed its name to Boundless Technologies. The
15618 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
15619 # as of early 1995) are at:
15621 # Boundless Technologies
15622 # 100 Marcus Boulevard
15623 # Hauppauge, NY 11788-3762
15624 # Vox: (800)-231-5445
15625 # Fax: (516)-342-7378
15626 # Web: http://boundless.com
15628 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
15629 # In 1995 Boundless acquired DEC's terminals business.
15632 # Regent: lowest common denominator, works on all regents.
15633 # (regent: renamed ":bc:" to ":le:" -- esr)
15634 regent|ADDS Regent Series,
15637 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
15638 home=\EY\s\s, ind=\n, ll=^A,
15639 # Regent 100 has a bug where if computer sends escape when user is holding
15640 # down shift key it gets confused, so we avoid escape.
15641 regent100|ADDS Regent 100,
15644 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15645 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
15646 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
15647 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
15648 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
15649 regent20|ADDS Regent 20,
15650 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
15652 regent25|ADDS Regent 25,
15653 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
15655 regent40|ADDS Regent 40,
15657 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
15658 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15659 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
15660 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
15661 smul=\E0`, use=regent25,
15662 regent40+|ADDS Regent 40+,
15663 is2=\EB, use=regent40,
15664 # It uses a different code for mapping acs vs dim/blink.
15665 regent60|regent200|adds200|ADDS Regent 60,
15666 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
15667 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
15668 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
15669 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
15670 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
15672 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
15673 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
15674 viewpoint|addsviewpoint|ADDS Viewpoint,
15677 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
15678 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15679 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
15680 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
15681 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
15682 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
15683 # Some viewpoints have bad ROMs that foo up on ^O
15684 screwpoint|ADDS Viewpoint with ^O bug,
15685 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
15687 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
15688 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
15689 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
15690 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
15691 # invis=01000100 and %c is the logical or of desired attributes.
15692 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
15694 # Update by TD - 2004:
15696 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
15698 # COMMANDS ASCII CODE
15700 # Address, Absolute ESC,=,row,column
15702 # Aux Port Enable ESC,@
15703 # Aux Port Disable ESC,A
15707 # Cursor forward FF
15710 # Cursor suppress ETB
15711 # Cursor enable CAN
15712 # Erase to end of line ESC,T
15713 # Erase to end of page ESC,Y
15716 # Keyboard unlock SO
15717 # Read current cursor position ESC,?
15718 # Set Attribute ESC,0,x (see below for values of x)
15719 # Tag bit reset ESC,(
15720 # Tag bit set ESC,)
15721 # Transparent Print on ESC,3
15722 # Transparent Print off ESC,4
15728 # Half Intensity A 0101
15730 # Half Intensity Blinking C 0103
15731 # Reverse Video P 0120
15732 # Reverse Video Half Intensity Q 0121
15733 # Reverse Video Blinking R 0122
15734 # Reverse Video Half Intensity
15736 # Underlined ` 0140
15737 # Underlined Half Intensity a 0141
15738 # Underlined Blinking b 0142
15739 # Underlined Half Intensity
15741 # Video suppress D 0104
15742 vp3a+|viewpoint3a+|ADDS Viewpoint 3a+,
15744 cols#80, it#8, lines#24,
15745 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
15746 cub1=^H, cud1=\n, cuf1=^L,
15747 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
15748 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
15749 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
15750 nel=\r\n, rev=\E0P\E), rmso=\E(,
15751 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
15752 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
15753 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
15754 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
15755 vp60|viewpoint60|addsvp60|ADDS Viewpoint60,
15758 # adds viewpoint 90 - from cornell
15759 # Note: emacs sends ei occasionally to insure the terminal is out of
15760 # insert mode. This unfortunately puts the viewpoint90 IN insert
15761 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
15762 # - :ei=:im=: must be present in the termcap translation.)
15763 # - <xhp> indicates glitch that attributes stick to location
15764 # - <msgr> means it's safe to move in standout mode
15765 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
15767 # Function key and label capabilities merged in from SCO.
15768 vp90|viewpoint90|ADDS Viewpoint 90,
15769 OTbs, bw, msgr, xhp,
15771 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
15772 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
15773 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
15774 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
15775 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
15776 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
15777 kf7=^B8\r, kf8=^B9\r, kf9=^B:\r, khome=^A, lf0=F1, lf1=F2,
15778 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
15779 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
15780 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
15781 # Note: if return acts weird on a980, check internal switch #2
15782 # on the top chip on the CONTROL pc board.
15783 adds980|a980|ADDS Consul 980,
15786 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
15787 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
15788 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
15789 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
15790 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
15792 #### C. Itoh Electronics
15794 # As of 1995 these people no longer make terminals (they're still in the
15795 # printer business). Their terminals were all clones of the DEC VT series.
15796 # They're located in Orange County, CA.
15799 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
15800 # the delay times and do an auto tab set rather than the indirect
15801 # file used in vt100.
15802 cit80|cit-80|citoh 80,
15805 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
15806 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
15807 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
15808 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
15809 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
15810 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
15811 cit101|citc|C. Itoh fast VT100,
15814 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
15815 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15816 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15817 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
15818 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
15819 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15820 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15821 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
15823 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
15824 # The following termcap entry was created from the Callan cd100 entry. The
15825 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
15826 # full selection of combinations of reverse video, underline, and blink.
15827 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
15828 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
15829 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
15830 cit101e|C. Itoh CIT-101e,
15831 OTbs, OTpt, am, mir, msgr,
15832 cols#80, it#8, lines#24,
15833 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
15834 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
15835 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
15836 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
15837 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
15838 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
15839 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
15840 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
15841 smkx=\E=, smso=\E[7m, smul=\E[4m,
15842 # From: David S. Lawyer, June 1997:
15843 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
15844 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
15845 # late 1980's CIT Terminals went out of business.
15846 # There is no need to use the initialization string is=... (by invoking
15847 # tset or setterm etc.) provided that the terminal has been manually set
15848 # up (and the setup saved with ^S) to be compatible with this termcap. To be
15849 # compatible it should be in ANSI mode (not VT52). A set-up that
15850 # works is to set all the manually settable stuff to factory defaults
15851 # by pressing ^D in set-up mode. Then increase the brightness with the
15852 # up-arrow key since the factory default will likely be dim on an old
15853 # terminal. Then change any options you want (provided that they are
15854 # compatible with the termcap). For my terminal I set: Screen
15855 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
15856 # on. I also set up mine for parity (but you may not need it). Then
15857 # save the setup with ^S.
15858 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
15859 cit101e-rv|C. Itoh CIT-101e (sets reverse video),
15860 am, eo, mir, msgr, xenl, xon,
15861 cols#80, it#8, lines#24,
15862 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15863 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
15864 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15865 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15866 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15867 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15868 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15869 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
15870 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
15871 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
15872 B\E[m\E[20l\E[1;24r\E[24;1H,
15873 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15874 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
15875 rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15876 rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
15877 smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
15878 smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u8=\E[?6c,
15879 use=ansi+enq, use=ecma+index,
15880 cit101e-n|CIT-101e w/o am,
15882 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15884 cit101e-132|CIT-101e with 132 cols,
15886 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
15887 cit101e-n132|CIT-101e with 132 cols w/o am,
15890 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
15892 # CIE Terminals CIT-500 from BRL
15893 # The following SET-UP modes are assumed for normal operation:
15894 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
15895 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
15896 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
15897 # Other SET-UP modes may be set for operator convenience or communication
15899 # Hardware tabs are assumed to be set every 8 columns; they can be set up
15900 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
15901 # "stty ixon -ixany" to enable DC3/DC1 flow control!
15902 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
15903 cit500|CIE Terminals CIT-500,
15904 OTbs, OTpt, mir, msgr, xon,
15905 OTkn#10, cols#80, it#8, lines#64, vt#3,
15906 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15907 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15908 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15909 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15910 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15911 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
15912 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
15913 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
15914 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
15915 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
15916 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
15917 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
15918 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
15919 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
15920 rmso=\E[m, rmul=\E[m,
15921 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
15922 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
15923 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15925 # C. Itoh printers begin here
15926 citoh|ci8510|8510|C. Itoh 8510a,
15929 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
15930 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
15932 citoh-pica|citoh in pica,
15933 is1=\EN, use=citoh,
15934 citoh-elite|citoh in elite,
15937 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15940 citoh-comp|citoh in compressed,
15943 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
15944 \,097\,105\,113\,121\,129.,
15946 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
15947 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
15949 is1=\EP, use=citoh,
15950 citoh-6lpi|citoh in 6 lines per inch mode,
15951 is3=\EA, use=citoh,
15952 citoh-8lpi|citoh in 8 lines per inch mode,
15954 is3=\EB, use=citoh,
15956 #### Control Data (cdc)
15959 cdc456|CDC 456 terminal,
15962 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15963 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
15964 el=^V, home=^Y, il1=\EL, ind=\n,
15966 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
15970 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15971 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15972 kcuu1=^W, khome=^Y,
15973 cdc721ll|CDC Viking with long lines,
15975 cols#132, lines#24,
15976 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
15977 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
15978 kcuu1=^W, khome=^Y,
15979 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
15983 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15984 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
15985 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
15987 # The following switch/key settings are assumed for normal operation:
15988 # 96 chars SCROLL FULL duplex not BLOCK
15989 # Other switches may be set according to communication requirements.
15990 # Insert/delete-character cannot be used, as the whole display is affected.
15991 # "so" & "se" are commented out until jove handles "sg" correctly.
15994 OTkn#10, cols#80, lines#24,
15995 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
15996 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
15997 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
15998 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
15999 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
16000 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
16001 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
16002 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
16005 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
16007 # Part of the long initialization string defines the "DOWN" key to the left
16008 # of the tab key to send an ESC. The real ESC key is positioned way out
16011 # The termcap won't work in 132 column mode due to the way it it moves the
16012 # cursor. Termcap doesn't have the capability (as far as I could tell) to
16013 # handle the 721 in 132 column mode.
16015 # (cdc721: changed :ri: to :sr: -- esr)
16016 cdc721-esc|Control Data 721,
16017 OTbs, OTpt, am, bw, msgr, xon,
16018 OTkn#10, cols#80, it#8, lines#30,
16019 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
16020 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
16021 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
16022 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
16023 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
16024 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
16025 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
16027 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
16028 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
16029 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
16030 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
16031 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
16036 # Getronics is a Dutch electronics company that at one time was called
16037 # `Geveke' and made async terminals; but (according to the company itself!)
16038 # they've lost all their documentation on the command set. The hardware
16039 # documentation suggests the terminals were actually manufactured by a
16040 # Taiwanese electronics company named Cal-Comp. There are known
16041 # to have been at least two models, the 33 and the 50.
16044 # The 50 seems to be a top end VT220 clone, with the addition of a higher
16045 # screen resolution, a larger screen, at least 1 page of memory above and
16046 # below the screen, apparently pages of memory right and left of the screen
16047 # which can be panned, and about 75 function keys (15 function keys x normal,
16048 # shift, control, func A, func B). It also has more setup possibilities than
16049 # the VT220. The monitor case is dated November 1978 and the keyboard case is
16052 # The VT100 emulation works as is. The entry below describes the rather
16053 # non-conformant (but more featureful) ANSI mode.
16055 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
16056 visa50|Geveke VISA 50 terminal in ANSI 80 character mode,
16059 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
16060 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
16061 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16062 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16063 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16064 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
16065 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
16066 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
16067 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
16068 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
16069 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
16070 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
16071 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
16072 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
16073 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
16074 lf3=A insert line, lf4=A delete line, lf5=A clear,
16075 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
16076 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
16077 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
16078 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
16079 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
16082 #### Human Designed Systems (Concept)
16084 # Human Designed Systems
16086 # King of Prussia, PA 19406
16087 # Vox: (610)-277-8300
16088 # Fax: (610)-275-5739
16089 # Net: support@hds.com
16091 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
16092 # the character-terminal business now (1995) and making X terminals. In
16093 # particular, the whole `Concept' line described here was discontinued long
16097 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
16098 # Extensive changes to c108 by arpavax:eric Feb 1982
16099 # Some unknown person at SCO then translated it to terminfo.
16101 # There seem to be a number of different versions of the C108 PROMS
16102 # (with bug fixes in its Z-80 program).
16104 # The first one that we had would lock out the keyboard of you
16105 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
16106 # Try that on your C108 and see if it sends a ^S when you type it.
16107 # If so, you have an old version of the PROMs.
16109 # You should configure the C108 to send ^S/^Q before running this.
16110 # It is much faster (at 9600 baud) than the c100 because the delays
16112 # new status line display entries for c108-8p:
16113 # <is3> - init str #3 - setup term for status display -
16114 # set programmer mode, select window 2, define window at last
16115 # line of memory, set bkgnd stat mesg there, select window 0.
16117 # <tsl> - to status line - select window 2, home cursor, erase to
16118 # end-of-window, 1/2 bright on, goto(line#0, col#?)
16120 # <fsl> - from status line - 1/2 bright off, select window 0
16122 # <dsl> - disable status display - set bkgnd status mesg with
16125 # There are probably more function keys that should be added but
16126 # I don't know what they are.
16128 # No delays needed on c108 because of ^S/^Q handshaking
16130 c108|concept108|c108-8p|concept108-8p|Concept 108 w/8 pages,
16131 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
16133 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
16134 c108-4p|concept108-4p|Concept 108 w/4 pages,
16135 OTbs, eslok, hs, xon,
16137 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
16138 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
16139 %>%t\001%{96}%-%;%{32}%+%c,
16140 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
16141 ind=\n, is1=\EK\E!\E F,
16142 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
16143 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
16144 smcup=\EU\Ev 8p\Ep\r\E\025,
16145 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
16146 c108-rv|c108-rv-8p|Concept 108 w/8 pages in reverse video,
16147 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
16149 c108-rv-4p|concept108rv4p|Concept 108 w/4 pages in reverse video,
16150 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
16152 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode,
16154 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
16155 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
16158 # These have only window relative cursor addressing, not screen
16159 # relative. To get it to work right here, smcup/rmcup (which
16160 # were invented for the concept) lock you into a one page
16161 # window for screen style programs.
16163 # To get out of the one page window, we use a clever trick:
16164 # we set the window size to zero ("\Ev " in rmcup) which the
16165 # terminal recognizes as an error and resets the window to all
16168 # This trick works on c100 but does not on c108, sigh.
16170 # Some tty drivers use cr3 for concept, others use nl3, hence
16171 # the delays on cr and ind below. This padding is only needed at
16172 # 9600 baud and up. One or the other is commented out depending on
16173 # local conventions.
16175 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
16176 # less than 6 but more than 2 will work.
16178 # Note: can't use function keys f7-f10 because they are
16179 # indistinguishable from arrow keys (!), also, del char and
16180 # clear eol use xon/xoff so they probably won't work very well.
16182 # Also note that we don't define insrt/del char/delline/eop/send
16183 # because they don't transmit unless we reset them - I figured
16184 # it was a bad idea to clobber their definitions.
16186 # The <mc5> sequence changes the escape character to ^^ so that
16187 # escapes will be passed through to the printer. Only trouble
16188 # is that ^^ won't be - ^^ was chosen to be unlikely.
16189 # Unfortunately, if you're sending raster bits through to be
16190 # plotted, any character you choose will be likely, so we lose.
16192 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
16193 # cannot be # in is2 because it will hang a c100 with no printer
16195 c100|concept100|concept|c104|c100-4p|HDS Concept 100,
16196 OTbs, am, eo, mir, ul, xenl,
16197 cols#80, lines#24, pb#9600, vt#8,
16198 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
16199 cub1=^H, cud1=\n, cuf1=\E=,
16200 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
16201 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
16202 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
16203 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
16205 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
16206 \010A@\s\E4#:"\E:a\E4#;"\E:b\E4#<"\E:c,
16207 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
16208 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
16209 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
16210 kf4=\E8, kf5=\E9, kf6=\E:a, kf7=\E:b, kf8=\E:c, khome=\E?,
16211 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
16212 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
16213 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
16214 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
16215 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
16216 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
16217 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
16218 smso=\ED, smul=\EG,
16219 c100-rv|c100-rv-4p|concept100-rv|Concept 100 reverse video,
16220 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
16221 smso=\EE, use=c100,
16222 oc100|oconcept|c100-1p|old 1-page Concept 100,
16226 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
16227 # Lots of notes, originally inline, but ncurses doesn't grok that.
16229 # am: not available in power on mode, but turned on with \E[=107;207h in
16230 # is2=. Also, \E=124l in is2= could have been used to prevent needing
16231 # to specify xenl:, but that would have rendered the last space on the
16232 # last line useless.
16233 # bw: Not available in power on mode, but turned on with \E[=107;207h in
16235 # clear: Could be done with \E[2J alone, except that vi (and probably most
16236 # other programs) assume that this also homes the cursor.
16237 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
16238 # scroll the window, and go back to window 1.
16239 # is2: the string may cause a warning to be issued by tic that it
16240 # found a very long line and that it suspects that a comma is missing
16241 # somewhere. This warning can be ignored (unless it comes up more than
16242 # once). The initialization string contains the following commands:
16244 # [Setup mode items changed from factory defaults:]
16245 # \E)0 set alternate character set to
16247 # ^O set character set to default
16248 # [In case it wasn't]
16249 # \E[m turn off all attributes
16250 # [In case they weren't off]
16251 # \E[=107; cursor wrap and
16252 # 207h character wrap on
16253 # \E[90;3u set Fkey definitions to "transmit"
16255 # \E[92;3u set cursor key definitions to
16256 # "transmit" defaults
16257 # \E[43;1u set shift F13 to transmit...
16259 # \E[44;1u set shift F14 to transmit...
16261 # \E[45;1u set shift F15 to transmit...
16263 # \E[46;1u set shift F16 to transmit...
16265 # \E[200;1u set shift up to transmit...
16267 # \E[201;1u set shift down to transmit...
16269 # \E[202;1u set shift right to transmit...
16271 # \E[203;1u set shift left to transmit...
16273 # \E[204;1u set shift home to transmit...
16275 # \E[212;1u set backtab to transmit...
16277 # \E[213;1u set shift backspace to transmit...
16279 # \E[214;1u set shift del to transmit...
16281 # [Necessary items not mentioned in setup mode:]
16282 # \E[2!w move to window 2
16283 # \E[25;25w define window as line 25 of memory
16284 # \E[!w move to window 1
16285 # \E[2*w show current line of window 2 as
16287 # \E[2+x set meta key to use high bit
16288 # \E[;3+} move underline to bottom of character
16290 # All Fkeys are set to their default transmit definitions with \E[90;3u
16291 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
16292 # setting MUST be redefined or deactivated, because the default is
16293 # contained in almost all of this terminal's Fkey strings! If for some
16294 # reason "quit" cannot be altered, the Fkeys can, but it would be
16295 # necessary to change ^| to ^] in all of these definitions, and add
16296 # \E[2;029!t to is2.
16297 # lines: is set to 24 because this terminal refuses to treat the 25th
16299 # ll: Not available in power on mode, but turned on with \E[=107;207h in
16301 # lm: Pointless, given that this definition locks a single screen of
16302 # memory into view, but what the hey...
16303 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
16304 # other attributes alone), but some programs expect this to turn off
16306 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
16307 # attributes alone), but some programs expect this to turn off
16309 # sgr: Attributes are set on this terminal with the string \E[ followed by
16310 # a list of attribute code numbers (in decimal, separated by
16311 # semicolons), followed by the character m. The attribute code
16314 # 2 for dim (which is ignored in power on mode);
16318 # 8 for not displayable; and
16319 # =99 for protected (except that there are strange side
16320 # effects to protected characters which make them inadvisable).
16321 # The mapping of terminfo parameters to attributes is as follows:
16322 # %p1 (standout) = bold and inverse together;
16323 # %p2 (underline) = underline;
16324 # %p3 (reverse) = inverse;
16325 # %p4 (blink) = blinking;
16326 # %p5 (dim) is ignored;
16327 # %p6 (bold) = bold;
16328 # %p7 (invisible) = not displayable;
16329 # %p8 (protected) is ignored; and
16330 # %p9 (alt char set) = alt char set.
16331 # The code to do this is:
16333 # %?%p1%p6%O IF (standout; bold) OR
16334 # %t;1 THEN OUTPUT ;1
16336 # %?%p2 IF underline
16337 # %t;4 THEN OUTPUT ;4
16340 # %t;5 THEN OUTPUT ;5
16342 # %?%p1%p3%O IF (standout; reverse) OR
16343 # %t;7 THEN OUTPUT ;7
16345 # %?%p7 IF invisible
16346 # %t;8 THEN OUTPUT ;8
16349 # %?%p9 IF altcharset
16350 # %t^N THEN OUTPUT ^N
16351 # %e^O ELSE OUTPUT ^O
16353 # sgr0: Everything is turned off (including alternate character set), since
16354 # there is no way of knowing what it is that the program wants turned
16356 # smul: The "underline" attribute is reconfigurable to an overline or
16357 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
16358 # bottom of the character cell. This was done to allow for more readable
16359 # underlined characters, and to be able to distinguish between an
16360 # underlined space, an underscore, and an underlined underscore.
16361 # xenl: Terminal can be configured to not need this, but this "glitch"
16362 # behavior is actually preferable with autowrap terminals.
16364 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
16365 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
16366 # string modifies the 'O' in kf43 to kf46 to a '$'.
16368 # kcbt was originally ^I but redefined in is2=.
16369 # kHOM was \E[H originally but redefined in is2=, as were a number of
16371 # kDC was originally \177 but redefined in is2=.
16373 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
16374 # tsl: Go to window 2, then do an hpa=.
16376 #------- flash=\E[8;3!}^G\E[3;3!}
16377 #------- flash=\E[?5h$<100>\E[?5l
16378 # There are two ways to flash the screen, both of which have their drawbacks.
16379 # The first is to set the bell mode to video, transmit a bell character, and
16380 # set the bell mode back - but to what? There is no way of knowing what the
16381 # user's old bell setting was before we messed with it. Worse, the command to
16382 # set the bell mode also sets the key click volume, and there is no way to say
16383 # "leave that alone", or to know what it's set to, either.
16384 # The second way to do a flash is to set the screen to inverse video, pad for a
16385 # tenth of a second, and set it back - but like before, there's no way to know
16386 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
16387 # it that way. The point is moot anyway, since vi (and probably other
16388 # programs) assume that by defining flash=, you want the computer to use it
16389 # INSTEAD of bel=, rather than as a secondary type of signal.
16391 #------- cvvis=\E[+{
16392 # The is the power on setting, which is also as visible as the cursor
16394 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
16395 # Windowing is possible, but not defined here because it is also used to
16396 # emulate status line functions. Allowing a program to set a window could
16397 # clobber the status line or render it unusable. There is additional memory,
16398 # but screen scroll functions are destructive and do not make use of it.
16400 #------- dim= Not available in power on mode.
16401 # You have a choice of defining low intensity characters as "half bright" and
16402 # high intensity as "normal", or defining low as "normal" and high as "bold".
16403 # No matter which you choose, only one of either "half bright" or "bold" is
16404 # available at any time, so taking the time to override the default is
16407 #------- prot=\E[=0;99m
16408 # Not defined, because it appears to have some strange side effects.
16409 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16410 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
16411 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
16412 # Available, but making them available to programs is inadvisable.
16413 # The code to do this is:
16414 # %?%p1%{24}%< IF ((key; 24) <;
16415 # %p1%{30}%> ((key; 30) >;
16416 # %p1%{54}%< (key; 54) <
16419 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
16420 # %t\E[ THEN OUTPUT \E[
16421 # %p1%d OUTPUT (key) as decimal
16422 # [next line applies to pfx only]
16426 # %p2%s OUTPUT (string) as string
16428 # [DEL chosen as delimiter, but could be any character]
16429 # [implied: ELSE do nothing]
16433 # Not defined since anything it might do could be done faster and easier with
16434 # either Meta-Shift-Reset or the main power switch.
16436 #------- smkx=\E[1!z
16437 #------- rmkx=\E[!z
16438 # These sequences apply to the cursor and setup keys only, not to the
16439 # numeric keypad. But it doesn't matter anyway, since making these
16440 # available to programs is inadvisable.
16441 # For the key definitions below, all sequences beginning with \E$ are
16442 # custom and programmed into the terminal via is2. \E$ also has no
16443 # meaning to any other terminal.
16445 #------- cmdch=\E[;%p1%d!t
16446 # Available, but making it available to programs is inadvisable.
16447 #------- smxon=\E[1*q
16448 # Available, but making it available to programs is inadvisable.
16449 # Terminal will send XON/XOFF on buffer overflow.
16450 #------- rmxon=\E[*q
16451 # Available, but making it available to programs is inadvisable.
16452 # Terminal will not notify on buffer overflow.
16453 #------- smm=\E[2+x
16455 # Available, but making them available to programs is inadvisable.
16458 # It's not made clear in the manuals, but based on other ansi/vt type
16459 # terminals, it's a good guess that this terminal is capable of both
16460 # "transparent print" (which doesn't copy data to the screen, and
16461 # therefore needs mc5i: specified to say so) and "auxiliary print"
16462 # (which does duplicate printed data on the screen, in which case mc4=
16463 # and mc5= should use the \E[?4i and \E[?5i strings instead).
16465 hds200|Human Designed Systems HDS200,
16466 am, bw, eslok, hs, km, mir, msgr, xenl, xon, NQ,
16467 cols#80, it#8, lines#24, lm#0,
16468 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16469 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
16470 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
16471 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16472 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16473 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16474 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16475 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
16476 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
16477 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
16479 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
16480 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
16481 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
16482 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
16483 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
16484 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
16485 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
16486 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16487 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
16488 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
16489 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
16490 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
16491 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
16492 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
16493 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
16494 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
16495 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
16496 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
16497 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
16498 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
16499 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
16500 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
16501 rmul=\E[m\017, sc=\E7,
16502 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
16503 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
16504 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
16505 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
16506 vpa=\E[%i%p1%dd, use=ansi+pp,
16508 # <ht> through <el> included to specify padding needed in raw mode.
16509 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
16510 avt-ns|Concept AVT no status line,
16511 OTbs, am, eo, mir, ul, xenl, xon,
16512 cols#80, it#8, lines#24, lm#192,
16513 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16514 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
16515 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16516 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
16517 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16518 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
16519 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
16520 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
16521 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
16522 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
16523 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
16524 \E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27
16526 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16527 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16528 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
16529 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
16530 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
16531 prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>,
16532 rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u,
16533 rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
16534 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
16535 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
16537 sgr0=\E[m\016$<1>, smacs=\017$<1>,
16538 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
16539 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16540 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
16541 avt-rv-ns|Concept AVT in reverse video mode/no status line,
16542 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16544 avt-w-ns|Concept AVT in 132 column mode/no status line,
16545 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16547 avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video,
16548 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16549 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
16551 # Concept AVT with status line. We get the status line using the
16552 # "Background status line" feature of the terminal. We swipe the
16553 # first line of memory in window 2 for the status line, keeping
16554 # 191 lines of memory and 24 screen lines for regular use.
16555 # The first line is used instead of the last so that this works
16556 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
16557 # assumes an 8 page AVT but lm isn't currently used anywhere.)
16559 avt+s|Concept AVT status line changes,
16562 dsl=\E[0*w, fsl=\E[1;1!w,
16563 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
16564 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
16565 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
16566 avt|avt-s|concept-avt|Concept AVT w/80 columns,
16567 use=avt+s, use=avt-ns,
16568 avt-rv|avt-rv-s|Concept AVT reverse video w/sl,
16569 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
16570 use=avt+s, use=avt-ns,
16571 avt-w|avt-w-s|Concept AVT 132 cols+status,
16572 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
16573 use=avt+s, use=avt-ns,
16574 avt-w-rv|avt-w-rv-s|Concept AVT wide+status+rv,
16575 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
16576 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
16578 #### Contel Business Systems.
16581 # Contel c300 and c320 terminals.
16582 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
16584 cols#80, lines#24, xmc#1,
16585 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16586 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16587 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16588 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16589 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
16590 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16591 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16592 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
16593 # Contel c301 and c321 terminals.
16594 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
16595 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
16598 #### Data General (dg)
16600 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
16601 # the terminals group at Data General was shut down in 1991; all these
16602 # terminals have thus been discontinued.
16604 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
16605 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
16606 # sequentially, first the unmodified key codes are listed as F1 through F15.
16607 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
16608 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
16609 # F46 through F60. This is done in the private "includes" below whose names
16610 # start with "dgkeys+".
16612 # DG terminals generally support 8 bit characters. For each of these terminals
16613 # two descriptions are supplied:
16614 # 1) A default description for 8 bits/character communications, which
16615 # uses the default DG international character set and keyboard codes.
16616 # 2) A description with suffix "-7b" for 7 bits/character communications.
16617 # This description must use the NON-DEFAULT native keyboard language.
16619 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
16620 # Ctrl/Shift fdkeys (kf34-kf44).
16622 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
16623 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
16624 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16625 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
16626 kf11=\233011z, kf12=\233012z, kf13=\233013z,
16627 kf14=\233014z, kf15=\233000z, kf16=\233101z,
16628 kf17=\233102z, kf18=\233103z, kf19=\233104z,
16629 kf2=\233002z, kf20=\233105z, kf21=\233106z,
16630 kf22=\233107z, kf23=\233108z, kf24=\233109z,
16631 kf25=\233110z, kf26=\233111z, kf27=\233112z,
16632 kf28=\233113z, kf29=\233114z, kf3=\233003z,
16633 kf30=\233100z, kf31=\233201z, kf32=\233202z,
16634 kf33=\233203z, kf34=\233204z, kf35=\233205z,
16635 kf36=\233206z, kf37=\233207z, kf38=\233208z,
16636 kf39=\233209z, kf4=\233004z, kf40=\233210z,
16637 kf41=\233211z, kf42=\233212z, kf43=\233213z,
16638 kf44=\233214z, kf45=\233200z, kf46=\233301z,
16639 kf47=\233302z, kf48=\233303z, kf49=\233304z,
16640 kf5=\233005z, kf50=\233305z, kf51=\233306z,
16641 kf52=\233307z, kf53=\233308z, kf54=\233309z,
16642 kf55=\233310z, kf56=\233311z, kf57=\233312z,
16643 kf58=\233313z, kf59=\233314z, kf6=\233006z,
16644 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
16645 khome=\233H, kprt=\233i,
16647 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
16648 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
16649 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16650 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
16651 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
16652 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
16653 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
16654 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
16655 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
16656 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
16657 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
16658 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
16659 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
16660 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
16661 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
16662 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
16663 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
16664 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
16665 kf9=\E[009z, khome=\E[H, kprt=\E[i,
16667 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
16668 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
16669 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
16670 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
16671 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
16672 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
16673 kf31=^^9, kf32=^^:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
16674 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
16675 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
16676 kf8=^^x, kf9=^^y, khome=^H,
16678 dgkeys+15|Private entry describing 15 DG mode special keys,
16679 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
16680 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
16681 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
16682 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
16683 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
16684 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
16685 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^:,
16686 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
16687 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
16688 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
16689 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
16692 # Data General color terminals use the "Tektronix" color model. The total
16693 # number of colors varies with the terminal model, as does support for
16694 # attributes used in conjunction with color.
16696 # Removed u7, u8 definitions since they conflict with tack:
16697 # Preserve user-defined colors in at least some cases.
16699 # Default is ACM mode.
16700 # u8=^^F}20^^Fi^^F}21,
16702 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
16704 colors#16, ncv#53, pairs#0x100,
16706 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16707 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16708 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16709 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16710 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16712 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
16715 # Video attributes are coordinated using static variables set by "sgr", then
16716 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
16717 # (D=dim, U=underline, B=blink, R=reverse.)
16718 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
16720 colors#8, ncv#16, pairs#64,
16721 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
16722 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16723 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16724 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16725 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16726 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
16727 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
16729 dg+color|Color info for Data General D470C terminals in ANSI mode,
16730 colors#16, ncv#53, pairs#0x100,
16731 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16732 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16734 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
16735 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
16737 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16738 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16740 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
16741 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
16745 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
16747 colors#8, ncv#16, pairs#64,
16749 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16751 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
16753 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
16755 dgmode+color|Color info for Data General D470C terminals in DG mode,
16756 colors#16, pairs#0x100,
16757 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16758 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16759 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
16760 %{4}%&%t%{1}%|%;%;%{48}%+%c,
16763 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
16765 colors#52, ncv#53, pairs#26,
16766 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
16767 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
16768 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
16770 oc=\036RG01A00FF00000000\036RG01B00000000FF00
16771 \036RG01C007F00000000\036RG01D000000007F00,
16772 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
16773 scp=\036RG2%p1%02X,
16775 # Colors are in the order: normal, reverse, dim, dim + reverse.
16776 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
16778 colors#52, ncv#53, pairs#26,
16779 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
16780 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
16781 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
16782 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
16783 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
16784 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
16785 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
16786 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
16787 oc=\036RG01:00??00000000\036RG01;00000000??00\036RG01<007?00
16788 000000\036RG01=000000007?00,
16789 op=\036RF4831:\036RF2>31;\036RF1=31<\036RF3?31=,
16790 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
16792 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
16793 # Initialization string 1 sets:
16794 # ^R - vertical scrolling enabled
16795 # ^C - blinking enabled
16796 dg-generic|generic Data General terminal in DG mode,
16799 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16800 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
16801 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
16802 smul=^T, use=dgkeys+11,
16804 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
16805 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
16806 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
16807 # maybe they were originally nuls (which would fit).
16809 dg200|Data General DASHER 200,
16812 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
16813 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
16814 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
16815 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
16816 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
16819 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
16820 dg210|dg-ansi|Data General 210/211,
16823 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16824 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16825 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16826 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
16827 smso=\E[7;m, smul=\E[4;m,
16828 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
16829 # courtesy of Carlos Rucalde of Vantage Software, Inc.
16830 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
16831 # I suspect the d200 function keys actually work on the dg211, check it out.)
16832 dg211|Data General d211,
16833 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
16834 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
16835 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
16837 # dg450 from Cornell (not official)
16838 dg450|dg6134|Data General 6134,
16839 cub1@, cuf1=^X, use=dg200,
16842 # Note: lesser Dasher terminals will not work with vi because vi insists upon
16843 # having a command to move straight down from any position on the bottom line
16844 # and scroll the screen up, or a direct vertical scroll command. The 460 and
16845 # above have both, the D210/211, for instance, has neither. We must use ANSI
16846 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
16847 # backspace on all terminals. This is not so in DG mode.
16848 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
16849 # grounds that there is no matching ":ml:"
16850 dg460-ansi|Data General Dasher 460 in ANSI-mode,
16851 OTbs, am, msgr, ul,
16852 cols#80, it#8, lines#24,
16853 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
16854 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
16855 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16856 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
16857 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16858 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
16859 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
16860 kf8=\E[009z, kf9=\E[00:z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
16861 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, mc0=\E[i,
16862 rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
16863 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
16865 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u8=\E[5n, u9=\E[0n,
16867 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
16868 # Data General 605x
16869 # Ought to work for a Model 6242, Type D210 as well as a 605x.
16870 # Note that the cursor-down key transmits ^Z. Job control users, beware!
16871 # This also matches a posted description of something called a `Dasher 100'
16872 # so there's a dg100 alias here.
16873 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
16874 dg6053-old|dg100|Data General 6053,
16877 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
16878 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
16879 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
16880 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
16881 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
16882 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
16885 # (Some performance can be gained over the generic DG terminal type)
16886 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
16888 home=\020\0\0, ll=^P\0^W, use=dg-generic,
16890 # Like 6053, but adds reverse video and more keypad and function keys.
16891 d200|d200-dg|Data General DASHER D200,
16892 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
16893 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16894 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
16895 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
16897 # DASHER D210 series terminals in ANSI mode.
16898 # Reverse video, no insert/delete character/line, 7 bits/character only.
16900 # Initialization string 1 sets:
16901 # <0 - scrolling enabled
16902 # <1 - blink enabled
16903 # <4 - print characters regardless of attributes
16904 d210|d214|Data General DASHER D210 series,
16907 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
16908 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16909 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16910 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
16911 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
16912 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
16913 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
16915 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
16917 # DASHER D210 series terminals in DG mode.
16918 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
16919 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
16921 ed=^^FF, use=d200-dg,
16923 # DASHER D211 series terminals in ANSI mode.
16924 # Like the D210, but with 8-bit characters and local printer support.
16926 # Initialization string 2 sets:
16928 # 2;1 - 8 bit operations
16929 # 1;1 - 8 bit (international) keyboard language
16930 # \E(B - default primary character set (U.S. ASCII)
16931 # \E)4 - default secondary character set (international)
16932 # ^O - primary character set
16934 d211|d215|Data General DASHER D211 series,
16936 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
16939 # Initialization string 2 sets:
16941 # 2;0 - 7 bit operations
16942 # 1;0 - 7 bit (native) keyboard language
16943 # \E(0 - default character set (the keyboard native language)
16944 # ^O - primary character set
16945 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
16947 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
16949 # Like the D210 series, but adds support for 8-bit characters.
16951 # Reset string 2 sets:
16952 # ^^N - secondary character set
16953 # ^^FS0> - 8 bit international character set
16954 # ^^O - primary character set
16955 # ^^FS00 - default character set (matching the native keyboard language)
16957 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
16959 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
16961 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
16964 # Enhanced DG mode with changes to be more UNIX compatible.
16965 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
16968 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
16969 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
16970 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
16971 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
16972 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
16973 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
16974 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
16975 rs2=\036N\036FS0E\036O\036FS00,
16976 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
16977 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
16979 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
16980 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
16981 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
16983 is3=^^Fz2, use=d216+,
16985 d217-unix|Data General DASHER D217 in DG-UNIX mode,
16987 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
16990 # DASHER D220 color terminal in ANSI mode.
16991 # Like the D470C but with fewer colors and screen editing features.
16993 # Initialization string 1 sets:
16995 # <0 - scrolling enabled
16996 # <1 - blink enabled
16997 # <4 - print characters regardless of attributes
16998 # \E[m - all attributes off
16999 # Reset string 1 sets:
17000 # \Ec - initial mode defaults (RIS)
17002 d220|Data General DASHER D220,
17004 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
17005 use=dg+color8, use=d470c,
17007 d220-7b|Data General DASHER D220 in 7 bit mode,
17009 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
17010 use=dg+color8, use=d470c-7b,
17012 # Initialization string 3 sets:
17013 # - default cursor (solid rectangle)
17014 # Reset string 2 sets:
17015 # ^^N - secondary character set
17016 # ^^FS0> - 8 bit international character set
17017 # ^^O - primary character set
17018 # ^^FS00 - default character set (matching the native keyboard language)
17020 d220-dg|Data General DASHER D220 color terminal in DG mode,
17022 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
17023 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
17026 # DASHER D230C color terminal in ANSI mode.
17027 # Like the D220 but with minor ANSI compatibility improvements.
17029 d230c|d230|Data General DASHER D230C,
17030 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
17031 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
17032 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}
17033 %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e
17034 %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;,
17035 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
17036 smul=\E[4;50m, use=dgkeys+7b, use=d220,
17038 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
17041 # DASHER D400/D450 series terminals.
17042 # These add intelligent features like insert/delete to the D200 series.
17044 # Initialization string 2 sets:
17045 # ^^FQ2 - default cursor (solid rectangle)
17046 # ^^FW - character protection disabled
17047 # ^^FJ - normal (80 column) mode
17048 # ^^F\^ - horizontal scrolling enabled (for alignment)
17049 # ^^FX004? - margins at columns 0 and 79
17050 # ^^F] - horizontal scrolling disabled
17051 # ^^O - primary character set
17052 # ^^FS00 - default character set (the keyboard native language)
17053 # - (should reset scrolling regions, but that glitches the screen)
17054 # Reset string 1 sets:
17055 # ^^FA - all terminal defaults except scroll rate
17056 # Reset string 2 sets:
17057 # ^^F] - horizontal scrolling disabled
17058 # ^^FT0 - jump scrolling
17060 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
17062 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
17063 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
17064 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
17065 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
17067 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
17069 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
17070 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
17071 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
17074 # DASHER D410/D460 series terminals in ANSI mode.
17075 # These add a large number of intelligent terminal features.
17077 # Initialization string 1 sets:
17079 # <0 - scrolling enabled
17080 # <1 - blink enabled
17081 # <2 - horizontal scrolling enabled (for alignment)
17082 # <4 - print characters regardless of attributes
17083 # \E[5;0v - normal (80 column) mode
17084 # \E[1;1;80w - margins at columns 1 and 80
17086 # 1 - print all characters even if protected
17087 # 6 - character protection disabled
17088 # <2 - horizontal scrolling disabled
17089 # - (should reset scrolling regions, but that glitches the screen)
17091 # Initialization string 2 sets:
17093 # 3;2 - default cursor (solid rectangle)
17094 # 2;1 - 8 bit operations
17095 # 1;1 - international keyboard language
17096 # \E(B - default primary character set (U.S. ASCII)
17097 # \E)4 - default secondary character set (international)
17098 # ^O - primary character set
17100 # Reset string 1 sets:
17101 # \Ec - initial mode defaults (RIS)
17102 # \E[<2h - horizontal scrolling disabled
17104 # Reset string 2 sets:
17106 # 4;0 - jump scrolling
17107 # 2;1 - 8 bit operations
17108 # 1;1 - 8 bit (international) keyboard language
17109 # \E(B - default primary character set (U.S. ASCII)
17110 # \E)4 - default secondary character set (international)
17112 d410|d411|d460|d461|Data General DASHER D410/D460 series,
17114 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
17115 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17116 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
17117 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
17118 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
17119 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
17120 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
17121 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
17122 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
17123 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
17125 # Initialization string 2 sets:
17127 # 3;2 - default cursor (solid rectangle)
17128 # 2;0 - 7 bit operations
17129 # 1;0 - 7 bit (native) keyboard language
17130 # \E(0 - default character set (the keyboard native language)
17131 # ^O - primary character set
17133 # Reset string 2 sets:
17135 # 4;0 - jump scrolling
17136 # 2;0 - 7 bit operations
17137 # 1;0 - 7 bit (native) keyboard language
17138 # \E(0 - default character set (the keyboard native language)
17140 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
17142 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
17143 rs2=\E[4;0;2;0;1;0v\E(0,
17144 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
17145 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
17146 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
17148 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
17150 enacs@, rmacs=\036FS00,
17151 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
17152 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
17154 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
17157 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
17159 # Initialization string 1 sets:
17161 # <0 - scrolling enabled
17162 # <1 - blink enabled
17163 # <2 - horizontal scrolling enabled (for alignment)
17164 # <4 - print characters regardless of attributes
17165 # \E[5;1v - compressed (135 column) mode
17166 # \E[1;1;126 - margins at columns 1 and 126
17168 # 1 - print all characters even if protected
17169 # 6 - character protection disabled
17170 # <2 - horizontal scrolling disabled
17171 # - (should reset scrolling regions, but that glitches the screen)
17173 # Reset string 1 sets:
17174 # \Ec - initial mode defaults (RIS)
17175 # \E[5;1v - compressed (135 column) mode
17176 # \E[1;1;126w - margins at columns 1 and 126
17177 # \E[<2h - horizontal scrolling disabled
17179 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
17181 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
17182 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
17184 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
17186 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
17187 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
17189 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
17192 # These add intelligent features like scrolling regions.
17193 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
17194 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
17195 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
17196 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
17197 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
17199 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
17200 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
17201 vpa=\036FPFF%p1%2.2X,
17202 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
17203 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
17205 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
17207 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
17209 rs2=\036P@1\036FK\036FX0083,
17210 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
17211 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
17213 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
17216 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
17217 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
17219 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
17221 clear=\036FG\036PH, fsl=\036F}01\022,
17222 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
17223 tsl=\036F}00\036FP%p1%2.2X18\036PG,
17224 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
17225 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
17228 # Relative cursor motions are confined to the current window,
17229 # which is not what the scrolling region specification expects.
17230 # Thus, relative vertical cursor positioning must be deleted.
17231 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
17232 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
17234 cud1@, cuu1@, ll@, use=d462+,
17236 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
17238 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
17240 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
17242 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
17244 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
17247 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
17249 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
17251 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
17253 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
17255 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
17258 d430c-dg|d430-dg|Data General D430C in DG mode,
17259 use=d413-dg, use=dg+fixed,
17260 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
17261 use=d413-dg, use=dg+ccc,
17263 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
17264 use=d413-unix, use=dgunix+fixed,
17265 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
17266 use=d413-unix-w, use=dgunix+fixed,
17267 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
17268 use=d413-unix-25, use=dgunix+fixed,
17269 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
17270 use=d413-unix-s, use=dgunix+fixed,
17271 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
17272 use=d413-unix-sr, use=dgunix+fixed,
17273 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
17274 use=d413-unix, use=dgunix+ccc,
17275 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
17276 use=d413-unix-w, use=dgunix+ccc,
17277 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
17278 use=d413-unix-25, use=dgunix+ccc,
17279 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
17280 use=d413-unix-s, use=dgunix+ccc,
17281 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
17282 use=d413-unix-sr, use=dgunix+ccc,
17284 # DASHER D470C color terminal in ANSI mode.
17285 # Like the D460 but with 16 colors and without a compressed mode.
17287 # Initialization string 1 sets:
17289 # <0 - scrolling enabled
17290 # <1 - blink enabled
17291 # <2 - horizontal scrolling enabled (for alignment)
17292 # <4 - print characters regardless of attributes
17293 # \E[1;1;80w - margins at columns 1 and 80
17295 # 1 - print all characters even if protected
17296 # 6 - character protection disabled
17297 # <2 - horizontal scrolling disabled
17298 # - (should reset scrolling regions, but that glitches the screen)
17300 d470c|d470|Data General DASHER D470C,
17301 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17302 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17303 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
17304 use=dg+color, use=d460,
17306 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
17307 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
17308 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
17309 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
17310 use=dg+color, use=d460-7b,
17312 # Initialization string 2 sets:
17313 # ^^FQ2 - default cursor (solid rectangle)
17314 # ^^FW - character protection disabled
17315 # ^^F\^ - horizontal scrolling enabled (for alignment)
17316 # ^^FX004? - margins at columns 0 and 79
17317 # ^^F] - horizontal scrolling disabled
17318 # ^^O - primary character set
17319 # ^^FS00 - default character set (the keyboard native language)
17320 # - (should reset scrolling regions, but that glitches the screen)
17322 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
17323 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
17325 use=dgmode+color, use=d460-dg,
17327 # DASHER D555 terminal in ANSI mode.
17328 # Like a D411, but has an integrated phone.
17329 d555|Data General DASHER D555,
17331 d555-7b|Data General DASHER D555 in 7-bit mode,
17333 d555-w|Data General DASHER D555 in wide mode,
17335 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
17337 d555-dg|Data General DASHER D555 series in DG mode,
17340 # DASHER D577 terminal in ANSI mode.
17341 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
17342 d577|Data General DASHER D577,
17344 d577-7b|Data General DASHER D577 in 7-bit mode,
17346 d577-w|Data General DASHER D577 in wide mode,
17348 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
17351 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
17354 # DASHER D578 terminal.
17355 # Like a D577, but without compressed mode; like a D470C in this respect.
17357 # Initialization string 1 sets:
17359 # <0 - scrolling enabled
17360 # <1 - blink enabled
17361 # <2 - horizontal scrolling enabled (for alignment)
17362 # <4 - print characters regardless of attributes
17363 # \E[1;1;80w - margins at columns 1 and 80
17365 # 1 - print all characters even if protected
17366 # 6 - character protection disabled
17367 # <2 - horizontal scrolling disabled
17368 # - (should reset scrolling regions, but that glitches the screen)
17370 d578|Data General DASHER D578,
17371 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
17372 d578-7b|Data General DASHER D578 in 7-bit mode,
17373 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
17375 #### Datamedia (dm)
17377 # Datamedia was headquartered in Nashua, New Hampshire until it went
17378 # out of business in 1993, but the ID plates on the terminals referred
17379 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
17380 # manufacturer which threw out all information about the terminals.
17383 cs10|colorscan|Datamedia Color Scan 10,
17386 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17387 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
17388 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17389 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
17390 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17391 cs10-w|Datamedia Color Scan 10 with 132 columns,
17393 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
17395 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
17396 dm1520|dm1521|Datamedia 1520,
17398 cols#80, it#8, lines#24,
17399 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
17400 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17401 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
17403 # dm2500: this terminal has both <ich> and <smir>. Applications using
17404 # termcap/terminfo directly (rather than through ncurses) might be confused.
17405 dm2500|datamedia2500|Datamedia 2500,
17408 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
17409 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
17410 dch1=\020\010\030\035$<10*>,
17411 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
17412 ich1=\020\034\030\035$<10*>,
17413 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
17414 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
17415 smdc=^P, smir=^P, smso=^N,
17416 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
17417 # also, has a meta-key.
17418 # From: <goldberger@su-csli.arpa>
17419 # (dmchat: ":MT:" changed to ":km:" -- esr)
17420 dmchat|dmchat version of Datamedia 2500,
17422 dl1=\020\032\030\035$<2/>,
17423 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
17424 # (dm3025: ":MT:" changed to ":km:" -- esr)
17425 dm3025|Datamedia 3025a,
17427 cols#80, it#8, lines#24,
17428 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17429 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17430 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
17431 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
17432 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
17433 smir=\EP, smso=\EO1,
17434 dm3045|Datamedia 3045a,
17435 OTbs, am, eo, km@, ul, xenl,
17436 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
17437 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
17438 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
17439 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
17441 # Datamedia DT80 soft switches:
17442 # 1 0=Jump 1=Smooth
17443 # Autorepeat 0=off 1=on
17444 # Screen 0=Dark 1=light
17445 # Cursor 0=u/l 1=block
17447 # 2 Margin Bell 0=off 1=on
17448 # Keyclick 0=off 1=on
17449 # ANSI/VT52 0=VT52 1=ANSI
17450 # Xon/Xoff 0=Off 1=On
17452 # 3 Shift3 0=Hash 1=UK Pound
17454 # Newline 0=Off 1=On
17455 # Interlace 0=Off 1=On
17457 # 4 Parity 0=Odd 1=Even
17458 # Parity 0=Off 1=On
17459 # Bits/Char 0=7 1=8
17460 # Power 0=60Hz 1=50Hz
17462 # 5 Line Interface 0=EIA 1=Loop
17463 # Aux Interface 0=EIA 1=Loop
17464 # Local Copy 0=Off 1=On
17467 # 6 Aux Parity 0=Odd 1=Even
17468 # Aux Parity 0=Off 1=On
17469 # Aux Bits/Char 0=7 1=8
17470 # CRT Saver 0=Off 1=On
17471 # dm80/1 is a VT100 lookalike, but it doesn't seem to need any padding.
17472 dm80|dmdt80|dt80|Datamedia dt80/1,
17473 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
17474 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
17475 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
17476 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
17477 smul=\E[4m, use=vt100+4bsd,
17478 # except in 132 column mode, where it needs a little padding.
17479 # This is still less padding than the VT100, and you can always turn on
17480 # the ^S/^Q handshaking, so you can use VT100 flavors for things like
17482 dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode,
17484 clear=\E[H\E[2J$<50/>, cud1=\n,
17485 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
17486 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
17487 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
17488 dt80-sas|Datamedia DT803/DTX for SAS usage,
17491 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
17492 bel=^G, clear=^L, cr=\r,
17493 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
17494 cub1=^H, cud1=\EB, cuf1=^\,
17495 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
17496 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
17497 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
17498 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
17499 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
17500 smso=\E$2\004, tbc=\E'0,
17502 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
17503 # These aren't end-all Excel termcaps; but do insert/delete char/line
17504 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
17505 # The naming convention has been bent somewhat, with the use of E? (where
17506 # E is for 'Excel') as # a name. This was done to distinguish the entries
17507 # from the other Datamedias in use here, and yet to associate a model of
17508 # the Excel terminals with the regular datamedia terminals that share
17509 # major characteristics.
17510 excel62|excel64|Datamedia Excel 62,
17511 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17512 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17514 excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode,
17515 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
17516 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
17518 excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode,
17519 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
17520 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
17521 smir=\E[4h, use=dt80,
17525 # Falco Data Products
17526 # 440 Potrero Avenue
17527 # Sunnyvale, CA 940864-196
17528 # Vox: (800)-325-2648
17529 # Fax: (408)-745-7860
17530 # Net: techsup@charm.sys.falco.com
17532 # Current Falco models as of 1995 are generally ANSI-compatible and support
17533 # emulations of DEC VT-series, Wyse, and TeleVideo types.
17536 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
17537 # This terminal was released around 1983 and was discontinued long ago.
17538 # The standout and underline highlights are the same.
17539 falco|ts1|ts-1|Falco ts-1,
17541 cols#80, it#8, lines#24,
17542 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17543 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17544 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
17545 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17546 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
17547 smir=\Eq, smso=\Eg1, smul=\Eg1,
17548 falco-p|ts1p|ts-1p|Falco ts-1 with paging option,
17549 OTbs, am, da, db, mir, msgr, ul,
17550 cols#80, it#8, lines#24,
17551 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
17552 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
17553 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
17554 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
17555 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
17556 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
17557 smso=\Eg4, smul=\Eg1,
17558 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
17559 ts100|ts100-sp|Falco ts100-sp,
17560 am, mir, msgr, xenl, xon,
17561 cols#80, it#8, lines#24, vt#3,
17562 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17563 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17564 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17565 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17566 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17567 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17568 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
17569 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
17570 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
17571 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17572 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17573 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17574 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17575 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17576 %;m%?%p9%t\016%e\017%;$<2>,
17577 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17578 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17579 use=decid+cpr, use=vt100+fnkeys,
17580 ts100-ctxt|Falco ts-100 saving context,
17581 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
17583 #### Florida Computer Graphics
17586 # Florida Computer Graphics Beacon System, using terminal emulator program
17587 # "host.com", as provided by FCG. This description is for an early release
17588 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
17591 # From: David Bryant <cbosg!djb> 1/7/83
17592 beacon|FCG Beacon System,
17595 bel=\ESTART\r\E37\r\EEND\r$<1>,
17596 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
17597 cub1=^H, cud1=\n, cuf1=\EV,
17598 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
17599 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
17600 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
17601 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
17602 rmul=\ESTART\r\E60\,0\r\EEND\r,
17603 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
17604 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
17605 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
17606 smul=\ESTART\r\E60\,1\r\EEND\r,
17611 # The f1720a differences from ANSI: no auto margin, destructive
17612 # tabs, # of lines, funny highlighting and underlining
17613 f1720|f1720a|fluke 1720A,
17615 cols#80, lines#16, xmc#1,
17616 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
17617 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
17618 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
17619 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17620 smso=\E[7m, smul=\E[4m,
17622 #### Liberty Electronics (Freedom)
17624 # Liberty Electronics
17625 # 48089 Fremont Blvd
17627 # Vox: (510)-623-6000
17628 # Fax: (510)-623-7021
17630 # From: <faletti@berkeley.edu>
17631 # (f100: added empty <acsc> to suppress a tic warning;
17632 # made this relative to adm+sgr -- note that <invis> isn't
17633 # known to work for f100 but does on the f110. --esr)
17634 f100|freedom|freedom100|Liberty Freedom model 100,
17635 OTbs, am, bw, hs, mir, msgr, xon,
17637 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
17638 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17639 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
17640 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
17641 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
17642 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
17643 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
17644 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17645 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
17646 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
17647 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17648 f100-rv|freedom-rv|Liberty Freedom 100 in reverse video,
17649 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
17650 # The f110 and f200 have problems with vi(1). They use the ^V
17651 # code for the down cursor key. When kcud1 is defined in terminfo
17652 # as ^V, the Control Character Quoting capability (^V in insert mode)
17653 # is lost! It cannot be remapped in vi because it is necessary to enter
17654 # a ^V to to quote the ^V that is being remapped!!!
17656 # f110/f200 users will have to decide whether
17657 # to lose the down cursor key or the quoting capability. We will opt
17658 # initially for leaving the quoting capability out, since use of VI
17659 # is not generally applicable to most interactive applications
17660 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
17661 f110|freedom110|Liberty Freedom 110,
17664 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
17665 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
17666 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
17667 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17668 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
17669 smso=\EG<, tsl=\Ef, use=f100,
17670 f110-14|Liberty Freedom 110 14inch,
17672 f110-w|Liberty Freedom 110 - 132 cols,
17673 cols#132, use=f110,
17674 f110-14w|Liberty Freedom 110 14in/132 cols,
17677 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17678 f200|freedom200|Liberty Freedom 200,
17679 OTbs, am, eslok, hs, mir, msgr, xon,
17680 cols#80, it#8, lines#24, wsl#80,
17681 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
17682 clear=^Z, cnorm=\E.1, cr=\r,
17683 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
17684 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17685 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
17686 flash=\Eo$<200/>\En, fsl=\r, home=^^,
17687 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
17688 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
17689 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17690 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17691 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
17692 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
17693 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
17694 f200-w|Liberty Freedom 200 - 132 cols,
17695 cols#132, use=f200,
17696 # The f200 has the ability to reprogram the down cursor key. The key is
17697 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
17698 # so powering the terminal off and on will not cause the change to be lost.
17699 f200vi|Liberty Freedom 200 for vi,
17700 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
17701 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
17702 cols#132, use=f200vi,
17706 # Graphon Corporation
17707 # 544 Division Street
17708 # Campbell, CA 95008
17709 # Vox: (408)-370-4080
17710 # Fax: (408)-370-5047
17711 # Net: troy@graphon.com (Troy Morrison)
17714 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
17715 # including one odd hybrid that starts out life on power-up as a character
17716 # terminal, than can be switched to X graphics mode (driven over the serial
17717 # line) by an escape sequence. No info on this beast yet.
17718 # (go140: I added <rmam>/<smam> based on the init string -- esr)
17719 go140|graphon go-140,
17721 cols#80, it#8, lines#24,
17722 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
17723 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17724 ed=\E[J$<10/>, el=\E[K, ht=^I,
17725 if=/usr/share/tabset/vt100, il1=\E[L,
17726 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17727 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
17728 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
17729 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
17730 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
17731 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17732 go140w|graphon go-140 in 132 column mode,
17735 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
17737 # Hacked up vt200 termcap to handle GO-225/VT220
17738 # From: <edm@nwnexus.WA.COM>
17739 # (go225: I added <rmam>/<smam> based on the init string -- esr)
17740 go225|go-225|Graphon 225,
17741 OTbs, am, mir, xenl,
17742 cols#80, it#8, lines#25, vt#3,
17743 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
17744 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
17745 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17746 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
17747 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
17748 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17749 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
17750 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
17751 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
17752 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
17753 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
17754 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
17756 #### Harris (Beehive)
17758 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
17759 # Their terminal group is ancient history now (1995) though the parent
17760 # company is still in business.
17763 # Beehive documentation is undated and marked Preliminary and has no figures
17764 # so we must have early Superbee2 (Model 600, according to phone conversation
17765 # with mfr.). It has proved reliable except for some missing padding
17766 # (notably after \EK and <nl> at bottom of screen).
17768 # The key idea is that AEP mode is poison for <cup> & that US's in
17769 # the local memory should be avoided like the plague. That means
17770 # that the 2048 character local buffer is used as 25 lines of 80
17771 # characters, period. No scrolling local memory, folks. It also
17772 # appears that we cannot use naked INS LINE feature since it uses
17773 # US. The sbi fakes <il1> with an 80-space insert that may be too
17774 # slow at low speeds; also spaces get converted to \040 which is
17775 # too long for some programs (not vi). DEL LINE is ok but slow.
17777 # The <nl> string is designed for last line of screen ONLY; cup to
17778 # 25th line corrects the motion inherent in scrolling to Page 1.
17780 # There is one understood bug. It is that the screen appears to
17781 # pop to a new (blank) page after a <nel>, or leave a half-line
17782 # ellipsis to a quad that is the extra 48 memory locations. The
17783 # data received is dumped into memory but not displayed. Not to
17784 # worry if <cup> is being used; the lines not displayed will be,
17785 # whenever the cursor is moved up there. Since <cup> is addressed
17786 # relative to MEMORY of window, nothing is lost; but beware of
17787 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
17788 # therefore, is setenv MORE -c .
17790 # WARNING: Not all features tested.
17792 # Timings are assembled from 3 sources. Some timings may reflect
17793 # SB2/Model 300 that were used if more conservative.
17794 # Tested on a Model 600 at 1200 and 9600 bd.
17796 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
17797 # placed on the keyboard and useless because of AEP, is made
17798 # into a backspace key. In use ESC must be pressed twice (to send)
17799 # and sending ^C must be prefixed by ESC to avoid that weird
17800 # transmit mode associated with ENTER key.
17802 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
17803 # the screen, then it has dropped into ENTER mode; hit
17804 # RESET--ONLINE--!tset.
17806 # As delivered this machine has a FATAL feature that will throw
17807 # it into that strange transmit state (SPOW) if the space bar is
17808 # hit after a CR is received, but before receiving a LF (or a
17811 # The circuits MUST be modified to eliminate the SPOW latch.
17812 # This is done by strapping on chip A46 of the I/O board; cut
17813 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
17814 # chip. This mod has been checked out on a Mod 600 of Superbee II.
17815 # With this modification absurdly high timings on cr are
17818 # NOTE WELL that the rear panel switch should be set to CR/LF,
17821 sb1|Beehive SuperBee,
17822 OTbs, am, bw, da, db, mir, ul, xsb,
17823 cols#80, lines#25, xmc#1,
17824 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
17825 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
17826 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
17827 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
17828 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17829 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17830 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
17831 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
17832 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
17833 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
17834 kf0=\E2, kf9=\E1, khome=\EH, kich1=\EQ\EO, krmir=\ER,
17835 lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, rmso=\E_3,
17836 rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, smso=\E_1,
17837 smul=\E_0, tbc=\E3, use=hp+pfk-cr,
17838 sbi|superbee|Beehive SuperBee at Indiana U.,
17840 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
17842 # Alternate (older) description of Superbee - f1=escape, f2=^C.
17843 # Note: there are at least 3 kinds of superbees in the world. The sb1
17844 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
17845 # The sb3 puts garbage on the bottom of the screen when you scroll with
17846 # the switch in the back set to CRLF instead of AEP. This description
17847 # is tested on the sb2 but should work on all with either switch setting.
17848 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
17849 # the other two if you want to try to hit that tiny escape key.
17850 # This description is tricky: being able to use cup depends on there being
17851 # 2048 bytes of memory and the hairy <nl> string.
17852 superbee-xsb|Beehive SuperBee (improved),
17854 cols#80, it#8, lines#25,
17855 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
17856 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
17857 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
17858 home=\EH, ht=^I, hts=\E1,
17859 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
17860 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
17861 rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, use=hp+pfk-cr,
17862 # This loses on lines > 80 chars long, use at your own risk
17863 superbeeic|SuperBee with insert char,
17864 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
17865 sb2|sb3|fixed SuperBee,
17866 xsb@, use=superbee,
17868 #### Beehive Medical Electronics
17870 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
17871 # Regarding your question though; Beehive terminals weren't made by Harris.
17872 # They were made by Beehive Medical Electronics in Utah. They went out of
17873 # business in the early '80s.
17875 # (OK, then, I don't know why a couple of these say "Harris Beehive".)
17878 # Reports are that most of these Beehive entries (except superbee) have not
17879 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
17881 # (bee: <ich1> was empty, which is obviously bogus -- esr)
17882 beehive|bee|Harris Beehive,
17885 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
17886 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
17887 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
17888 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17889 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
17890 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
17891 smir=\EQ, smso=\EdP, smul=\Ed`,
17892 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
17893 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
17894 # look at those spaces in <rmso>/<smso>. Seems strange to me...
17895 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
17896 # really care, cook up one using ^F -- esr)
17897 beehive3|bh3m|beehiveIIIm|Harris Beehive 3m,
17899 cols#80, it#8, lines#20,
17900 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
17901 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
17902 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
17903 beehive4|bh4|Beehive 4,
17906 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
17907 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
17908 # There was an early Australian kit-built computer called a "Microbee".
17909 # It's not clear whether this is for one of those or for a relative
17911 microb|microbee|Micro Bee series,
17913 cols#80, it#8, lines#24,
17914 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17915 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17916 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17917 kcuu1=\EA, kf9=\Ex, khome=\EH, rmso=\Ed@, rmul=\Ed@,
17918 sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, use=hp+pfk-cr,
17920 # 8675, 8686, and bee from Cyrus Rahman
17921 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
17922 ha8675|Harris 8675,
17923 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
17924 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
17925 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
17927 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
17929 ha8686|Harris 8686,
17930 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
17931 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
17932 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
17934 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
17935 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
17936 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
17937 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
17941 # Hazeltine appears to be out of the terminal business as of 1995. These
17942 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
17943 # Harris. They have a hazeltine.com domain (but no web page there ) and can
17947 # 450 East Pulaski Road
17948 # Greenlawn, New York 11740
17950 # As late as 1993, manuals for the terminal product line could still be
17953 # TRW Customer Service Division
17956 # Fairfield, NJ 07007-2078
17958 # They're now (1998) a subsidiary of General Electric, operating under the
17959 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
17960 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
17963 # Since <cuf1> is blank, when you want to erase something you
17964 # are out of luck. You will have to do ^L's a lot to
17965 # redraw the screen. h1000 is untested. It doesn't work in
17966 # vi - this terminal is too dumb for even vi. (The code is
17967 # there but it isn't debugged for this case.)
17968 hz1000|Hazeltine 1000,
17971 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
17973 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
17974 hz1420|Hazeltine 1420,
17977 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
17978 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
17979 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
17981 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
17982 # freakout with out-of-range args and tn3270. No hz since it needs to
17984 hz1500|Hazeltine 1500,
17987 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
17988 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
17989 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
17990 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
17991 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
17992 # h1510 assumed to be in sane escape mode. Else use h1500.
17993 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
17994 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
17995 # removed incorrect and overridden ":do=^J:" -- esr)
17996 hz1510|Hazeltine 1510,
17999 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
18000 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
18001 el=\E^O, il1=\E^Z, ind=\n,
18003 # The following switch settings are assumed for normal operation:
18004 # FULL CR U/L_CASE ESCAPE
18005 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
18006 # Other switches may be set for operator convenience or communication
18008 hz1520|Hazeltine 1520,
18009 OTbs, am, bw, msgr,
18011 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
18012 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
18013 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
18014 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
18015 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
18016 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
18017 # This version works with the escape switch off
18018 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
18019 hz1520-noesc|Hazeltine 1520 (no escape),
18022 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
18023 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
18024 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
18025 # Note: the h1552 appears to be the first Hazeltine terminal which
18026 # is not braindamaged. It has tildes and backprimes and everything!
18027 # Be sure the auto lf/cr switch is set to cr.
18028 hz1552|Hazeltine 1552,
18030 cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
18032 hz1552-rv|Hazeltine 1552 reverse video,
18033 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
18034 # Note: h2000 won't work well because of a clash between upper case and ~'s.
18035 hz2000|Hazeltine 2000,
18038 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
18039 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
18040 il1=~\032$<6>, ind=\n, pad=^?,
18041 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
18042 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
18043 # to work ok. There is one problem though if one types a lot of garbage
18044 # characters very fast vi seems not able to keep up and hangs while trying
18045 # to insert. That's in insert mode while trying to insert in the middle of
18046 # a line. It might be because the Esprit doesn't have insert char and delete
18047 # char as a built in function. Vi has to delete to end of line and then
18048 # redraw the rest of the line.
18049 esprit|Hazeltine Esprit I,
18052 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
18053 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
18054 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
18055 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
18056 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
18057 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
18058 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
18059 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
18060 esprit-am|Hazeltine esprit auto-margin,
18062 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
18063 # Vi it seems always wants to send a control J for "do" and it turned out
18064 # that the terminal would work somewhat if the auto LF/CR was turned off.
18065 # (hmod1: removed :dn=~^K: -- esr)
18066 hmod1|Hazeltine Modular 1,
18069 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
18070 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
18071 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
18072 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
18074 # Hazeltine Executive 80 Model 30 (1554?)
18075 # from Will Martin <control@ALMSA-1.ARPA> via BRL
18076 # Like VT100, except for different "am" behavior.
18077 hazel|exec80|h80|he80|Hazeltine Executive 80,
18079 cols#80, it#8, lines#24, vt#3,
18080 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
18081 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18082 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
18083 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
18084 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
18085 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
18086 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
18087 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
18088 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
18089 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
18090 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18091 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
18097 ibm327x|line mode IBM 3270 style,
18099 clear=\r\n, el=\r, home=\r,
18101 ibm3101|i3101|IBM 3101-10,
18104 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18105 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18106 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
18107 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
18108 ibm3151|IBM 3151 display,
18109 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
18110 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
18111 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
18112 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
18113 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
18114 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
18115 # removed kend, knp, kpp -TD
18117 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
18118 # Added ich1 (kich1 without ich1 doesn't make sense).
18119 # Added il1 (kil1 without il1 doesn't make sense).
18120 # Added xon (terminal uses XON/XOFF flow control).
18122 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
18123 OTbs, am, mir, msgr, xon,
18124 cols#80, it#8, lines#24,
18125 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
18127 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
18128 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18129 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
18130 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
18131 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18132 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
18133 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
18134 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
18135 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
18136 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
18137 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
18138 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
18139 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
18140 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
18141 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
18142 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
18143 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
18144 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
18146 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
18147 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
18149 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
18150 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
18153 ibm3162|IBM 3162 display,
18154 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
18155 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
18158 # This really should not use setab/setaf, but it is clear that the
18159 # original terminfo does not toggle red/blue colors as in setb/setf.
18160 ibm3164|i3164|IBM 3164,
18162 colors#8, pairs#64,
18163 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
18164 setab=\E4 %p1%{64}%+%c,
18165 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
18166 smcup=\E!9/N\E>B, use=ibm3161,
18168 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
18170 cols#80, it#8, lines#25,
18171 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18173 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
18174 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18175 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18176 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
18177 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
18178 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
18179 invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q,
18180 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
18181 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
18182 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
18183 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
18184 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
18185 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
18186 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
18187 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
18188 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
18189 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
18190 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H,
18191 kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q,
18192 kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T,
18193 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec,
18194 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18196 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18199 ibmaed|IBM Experimental display,
18200 OTbs, am, eo, msgr,
18201 cols#80, it#8, lines#52,
18202 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
18203 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
18204 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
18205 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18206 rmso=\E0, sgr0=\E0, smso=\E0,
18207 ibm-apl|apl|IBM apl terminal simulator,
18208 lines#25, use=dm1520,
18209 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
18210 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
18211 ibmmono|IBM workstation monochrome,
18213 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
18214 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
18215 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
18216 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
18217 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
18218 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
18220 ibmega|IBM Enhanced Color Display,
18221 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18222 nel=\r\n, use=ibmmono,
18223 # This color scheme is assumed in some recent IBM terminal descriptions
18224 # (green on black, emulated on a 16-color terminal).
18225 ibm+color|IBM color definitions,
18226 colors#8, ncv#3, pairs#64,
18228 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
18229 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
18230 %=%t46m%e%p1%{7}%=%t107m%;,
18231 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
18232 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
18233 %=%t36m%e%p1%{7}%=%t97m%;,
18234 ibm+16color|IBM aixterm color definitions,
18235 colors#16, pairs#0x100,
18236 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
18237 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
18238 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18239 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18240 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
18241 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
18242 ibm5154|IBM 5154 Color display,
18243 colors#8, ncv@, pairs#64,
18244 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18246 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
18247 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
18249 ibmvga-c|IBM VGA display color termcap,
18250 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18251 nel=\r\n, use=ibmega-c,
18252 ibmvga|IBM VGA display,
18253 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
18254 nel=\r\n, use=ibmega,
18255 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
18256 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
18258 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
18259 ibm6155|IBM 6155 Black & White display,
18260 blink@, bold@, use=ibm5151,
18261 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
18262 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
18264 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
18265 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
18267 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
18269 ibm6154|IBM 6154 Color displays,
18270 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18271 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18273 sgr0=\E[0;10m, use=ibm5154,
18274 ibm6153|IBM 6153 Black & White display,
18275 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
18276 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
18278 sgr0=\E[0;10m, use=ibm5151,
18279 ibm6153-90|IBM 6153 Black & White display (36-line),
18281 blink@, bold@, use=ibm5151,
18282 ibm6153-40|IBM 6153 Black & White display (12-line),
18283 cols#40, lines#12, use=ibm6153-90,
18284 ibm8512|ibm8513|IBM color VGA Terminal,
18286 cols#80, it#8, lines#25,
18287 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
18288 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
18289 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
18290 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
18291 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
18292 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
18293 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
18294 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
18295 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
18296 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
18297 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
18298 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
18299 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18301 hft-c|HFT with Color,
18302 colors#8, pairs#64,
18303 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
18304 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
18305 use=ibm5151, use=ibm+color,
18306 hft-c-old|HFT with Color PC850,
18307 colors#8, pairs#64,
18308 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
18310 hft-old|AIWS High Function Terminal,
18313 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
18314 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18315 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
18316 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
18317 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18318 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
18319 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
18320 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
18321 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
18322 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
18323 ibm-system1|system1|IBM system/1 computer,
18326 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
18327 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
18329 # lft-pc850 : IBM Low Function Terminal Device
18330 # lft "supports" underline, bold, and blink in the sense that the lft code
18331 # sets all the right bits. HOWEVER, depending upon the adapter, these
18332 # attributes may or may not be supported by the device driver.
18333 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
18335 cols#80, it#8, lines#25,
18336 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18338 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18339 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18340 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18341 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18342 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
18343 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
18344 il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
18345 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18346 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
18347 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
18348 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
18349 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
18350 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
18351 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
18352 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
18353 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
18354 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
18355 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
18356 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
18357 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
18358 krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l,
18359 rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
18360 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18361 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
18362 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18363 tbc=\E[3g, use=ecma+index,
18364 # "Megapel" refers to the display adapter, which was used with the IBM RT
18366 ibm5081|hft|IBM Megapel Color display,
18367 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
18368 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
18369 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
18372 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
18374 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
18376 ibm8514|IBM 8514/a color VGA display,
18378 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
18379 ibm8514-c|IBM 8514 color display with standout and underline,
18382 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
18383 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
18387 # AIX entries. IBM ships these with AIX 3.2.5.
18388 # -- added rc, sc based on manpage -TD
18389 # -- added rmacs, smacs based on manpage -TD
18390 # Note that we could use ibm+16color, but that is not how IBM defines this one.
18391 aixterm|IBM Aixterm Terminal Emulator,
18392 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, rc=\E8, ri@,
18393 rmacs=\E(B, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18394 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18395 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18396 sgr0=\E[0;10m\E(B, smacs=\E(0, use=ibm6154,
18398 aixterm+sl|status line for AIXterm,
18400 dsl=\E[?E, fsl=\E[?F, tsl=\E[?%p1%dT,
18402 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
18403 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, ri@, s0ds=\E(B,
18405 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18406 %t;8%;m%?%p9%t\E(0%e\E(B%;,
18407 sgr0=\E[0;10m\E(B, use=ibm6153, use=aixterm+sl,
18408 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
18410 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
18412 use=ibm6153, use=aixterm+sl,
18413 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
18415 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18417 sgr0=\E[m, smacs@, use=aixterm,
18418 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
18420 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
18422 sgr0=\E[m, smacs@, use=aixterm-m,
18424 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
18425 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
18426 use=ibm+16color, use=aixterm,
18428 #### Infoton/General Terminal Corp.
18431 # gt100 sounds like something DEC would come out with. Let's hope they don't.
18432 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
18435 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18436 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
18437 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
18438 ind=\n, rmso=\Ea, smso=\Eb,
18443 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
18444 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
18445 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
18446 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
18448 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
18449 addrinfo|cursor-addressable Infoton,
18450 cup=\037%p1%c%p2%c, home=^H, use=infoton,
18452 # "VISTAR II/HZ Technical Users Manual" (May 1975).
18454 infoton2|cursor-addressable Infoton VISTAR II,
18455 cup=~\021%p2%c%p1%c, home=^H, use=infoton,
18457 # "VISTAR Technical User's Manual" (October 1972).
18459 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
18460 infoton|Infoton VISTAR,
18463 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
18464 ed=^K, ind=\n, ll=^H^\,
18466 # The ICL6402 was actually the Kokusai Display System 6402.
18467 # The 6404 was the KDS7372 (color version of the 6402).
18469 # ICL6404 control codes follow:
18472 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18473 #ctrl-A set SOM position at cursor position
18476 #ctrl-I Horizontal tab
18479 #ctrl-L Cursor right
18480 #ctrl-M Carriage return
18481 #ctrl-N Disable xon/xoff to host
18482 #ctrl-O Enable xon/xoff to host
18483 #ctrl-R Enable bidirectional mode
18484 #ctrl-T Disable bidirectional mode
18485 #ctrl-V Cursor down
18486 #ctrl-Z Clear unprotected data to insert char
18487 #ctrl-^ Cursor home
18490 #ESC lead-in char for multiple character command
18492 #ESC space R execute power on sequence
18493 #ESC ! p1 p2 define scroll region:
18494 # p1 = scroll top line: 20h - 37h
18495 # p1 = scroll bottom line: 20h - 37h
18496 #ESC " unlock keyboard
18497 #ESC # lock keyboard
18498 #ESC $ Semi-graphics mode on
18499 #ESC % Semi-graphics mode off
18500 #ESC & protect mode on
18501 #ESC ' protect mode off
18502 #ESC ( write protect mode off (full intensity)
18503 #ESC ) write protect mode on (half intensity)
18505 #ESC * clear screen
18506 #ESC + clear unprotected data to insert char
18507 #ESC , clear unprotected data to half intensity spaces
18508 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
18509 # p1 = page number 0 - 3
18510 # p2 = row 20h - 7fh
18511 # p3 = column (lo) 20h - 7fh
18512 # p4 = column (hi) 20h - 21h (only 132 col)
18513 #ESC . p1 set cursor style:
18514 # p1 = 0 invisible cursor
18515 # p1 = 1 block blinking cursor
18516 # p1 = 2 block steady cursor
18517 # p1 = 3 underline blinking cursor
18518 # p1 = 4 underline steady cursor
18519 #ESC / transmit cursor location (page, row, column)
18520 #ESC 0 p1 p2 p3 p4 program edit key:
18521 # p1 = edit key code: '@'-'S', '`'-'s'
18522 # p2 p3 p4 = program data (3 bytes)
18525 #ESC 2 clear tab at cursor
18526 #ESC 3 clear all tabs
18527 #ESC 4 send unprotect line to cursor
18528 #ESC 5 send unprotect page to cursor
18529 #ESC 6 send line to cursor
18530 #ESC 7 send page to cursor
18531 #ESC 8 n set scroll mode:
18532 # n = 0 set jump scroll
18533 # n = 1 set smooth scroll
18534 #ESC 9 n control display:
18535 # n = 0 display off
18537 #ESC : clear unprotected data to null
18538 #ESC ; clear unprotected data to insert char
18541 #ESC = p1 p2 address cursor to row, column
18542 # p1 = row 20h - 7fh
18543 # p2 = column (lo) 20h - 7fh
18544 # p3 = column (hi) 20h - 21h (only 132 col)
18545 #ESC > keyclick off
18546 #ESC ? transmit cursor location (row, column)
18548 #ESC @ copy print mode on
18549 #ESC A copy print mode off
18550 #ESC B block mode on
18551 #ESC C block mode off (conversation mode)
18552 #ESC D F set full duplex
18553 #ESC D H set half duplex
18555 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
18556 # 0 = black, 1 = red, 2 = green, 3 = yellow
18557 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
18558 #ESC G n set serial field attribute (n = 30h - 3Fh)
18559 #ESC H n full graphics mode:
18560 # n = 0 exit full graphics mode
18561 # n = 1 enter full graphics mode
18564 #ESC K forward page
18566 #ESC L unformatted page print
18567 #ESC M L move window left (132 col mode only)
18568 #ESC M R move window right (132 col mode only)
18569 #ESC N set page edit (clear line edit)
18570 #ESC O set line edit (clear page edit)
18571 #ESC P formatted page print
18572 #ESC Q character insert
18574 #ESC S send message unprotected only
18575 #ESC T erase line to insert char
18576 #ESC U set monitor mode (see ESC X, ESC u)
18578 #ESC V n select video attribute mode:
18579 # n = 0 serial field attribute mode
18580 # n = 1 parallel character attribute mode
18581 #ESC V 2 n define line attribute:
18582 # n = 0 single width single height
18583 # n = 1 single width double height
18584 # n = 2 double width single height
18585 # n = 3 double width double height
18586 #ESC V 3 n select character font:
18587 # n = 0 system font
18588 # n = 1 user defined font
18589 #ESC V 4 n select screen mode:
18590 # n = 0 page screen mode
18591 # n = 1 virtual screen mode
18592 #ESC V 5 n control mouse mode:
18593 # n = 0 disable mouse
18594 # n = 1 enable sample mode
18595 # n = 2 send mouse information
18596 # n = 3 enable request mode
18597 #ESC W character delete
18598 #ESC X clear monitor mode (see ESC U, ESC u)
18599 #ESC Y erase page to insert char
18601 #ESC Z n send user/status line:
18602 # n = 0 send user line
18603 # n = 1 send status line
18604 # n = 2 send terminal ID
18605 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
18609 # 3 = blink blank (= blank)
18611 # 5 = reverse blank
18612 # 6 = reverse blink
18613 # 7 = reverse blink blank (= reverse blank)
18615 # 9 = underline blank
18616 # : = underline blink
18617 # ; = underline blink blank
18618 # < = reverse underline
18619 # = = reverse underline blank
18620 # > = reverse underline blink
18621 # ? = reverse underline blink blank
18622 # p2, p3: f/grnd, b/grnd colour
18623 # (see ESC F for colours)
18624 # use ZZ for mono, eg.
18625 # ESC [ 0 Z Z for normal
18626 # ESC [ 4 Z Z for inverse etc.
18628 #ESC \ n set page size:
18629 # n = 1 24 lines/page
18630 # n = 2 48 lines/page
18631 # n = 3 72 lines/page
18632 # n = 4 96 lines/page
18633 #ESC ] n set Wordstar mode:
18634 # n = 0 normal (KDS7372) mode
18635 # n = 1 Wordstar mode
18637 #ESC b set foreground colour screen
18639 #ESC c n enter self-test mode:
18640 # n = 0 exit self test mode
18644 # n = 4 screen display test
18645 # n = 5 main/printer port test
18646 # n = 6 mouse port test
18647 # n = 7 graphics board test
18648 # n = 8 graphics memory test
18649 # n = 9 display all 'E'
18650 # n = : display all 'H'
18651 #ESC d set background colour screen
18653 #ESC e n program insert char (n = insert char)
18654 #ESC f text CR load user status line with 'text'
18656 #ESC g display user status line on 25th line
18657 #ESC h display system status line on 25th line
18659 #ESC j reverse linefeed
18660 #ESC k n duplex/local edit mode:
18661 # n = 0 duplex edit mode
18662 # n = 1 local edit mode
18663 #ESC l n select virtual screen:
18666 #ESC m save current config to NVRAM
18667 #ESC n p1 select display screen:
18672 #ESC o p1 p2 set characters/line and attribute:
18673 # p1 = 0 80 chars/line
18675 #ESC o p1 p2 set characters/line and attribute:
18676 # p1 = 0 80 chars/line
18677 # p1 = 1 132 chars/line
18678 # p2 = 0 single width single height
18679 # p2 = 1 single width double height
18680 # p2 = 2 double width single height
18681 # p2 = 3 double width double height
18683 #ESC q insert mode on
18684 #ESC r edit mode on
18685 #ESC s send message all
18686 #ESC t erase line to null
18687 #ESC u clear monitor mode (see ESC U, ESC X)
18688 #ESC v autopage mode on
18689 #ESC w autopage mode off
18690 #ESC x p1 p2 p3 define delimiter code...
18691 #ESC y erase page to null
18693 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
18694 # p1 = starting row
18695 # p2 = starting column
18699 #ESC { p1 p2 p3 p4 configure main port
18700 # (baud, stop bits, parity, word length)
18702 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
18703 # p1 = function key code:
18704 # '1' - ';' normal f1- f11
18705 # '<' - 'F' shifted f1 - f11
18706 # p2 = program mode:
18710 # Ctrl-Y = terminator
18711 # (use Ctrl-P to escape ^P, ^Y )
18713 #ESC } p1 p2 p3 p4 configure printer port
18714 # (baud, stop bits, parity, word length)
18715 #ESC ~ send system status
18717 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
18719 # Entry is by esr going solely on above information and is UNTESTED.
18720 # This actually looks a lot like a TeleVideo 9xx.
18721 # This entry uses page 0 and is monochrome; I'm not brave enough to try
18722 # to make color work without a test terminal. The <am> capability is a guess.
18723 # The initialization string sets conversation mode, blinking underline cursor,
18724 # full duplex, parallel attribute mode, display user status line, white
18725 # foreground, black background, normal highlight.
18727 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
18730 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
18731 cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c,
18732 cub1=^H, cud1=^V, cuf1=^L,
18733 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
18734 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
18735 hts=\E1, il1=\EE, invis=\E[1ZZ,
18736 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
18737 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
18738 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
18739 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
18740 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
18741 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
18742 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
18743 rs2=\Eo1, use=icl6404,
18745 #### Interactive Systems Corp
18747 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
18748 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
18749 # bought out by Sun.
18752 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
18753 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
18754 # ":le=^_:" later overridden -- esr)
18755 intext|Interactive Systems Corporation modified owl 1200,
18757 cols#80, it#8, lines#24, xmc#1,
18758 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
18759 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
18760 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
18761 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
18762 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
18763 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
18764 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
18765 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036:\264\026%%,
18767 intext2|intextii|INTERACTIVE modified owl 1251,
18769 cols#80, lines#24, xmc#0,
18770 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
18771 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18772 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
18773 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
18774 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
18775 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
18776 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
18777 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
18778 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
18779 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
18780 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
18783 #### Kimtron (abm, kt)
18785 # Kimtron seems to be history, but as March 1998 these people are still
18786 # offering repair services for Kimtron equipment:
18788 # Com/Pair Monitor Service
18789 # 1105 N. Cliff Ave.
18790 # Sioux Falls, South Dakota 57103
18792 # WATS voice: 1-800/398-4946
18793 # POTS fax: +1 605/338-8709
18794 # POTS voice: +1 605/338-9650
18795 # Email: <compair@sd.cybernex.net>
18796 # Internet/Web: <http://www.com-pair.com>
18798 # Kimtron entries include (undocumented) codes for: enter dim mode,
18799 # enter bold mode, enter reverse mode, turn off all attributes.
18802 # Kimtron ABM 85 added by Dual Systems
18803 # (abm85: removed duplicated ":kd=^J:" -- esr)
18804 abm85|Kimtron ABM 85,
18805 OTbs, am, bw, msgr,
18806 cols#80, it#8, lines#24, xmc#1,
18807 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
18808 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18809 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
18810 if=/usr/share/tabset/stdcrt, il1=\EE,
18811 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
18812 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
18813 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
18814 # Kimtron ABM 85H added by Dual Systems.
18815 # Some notes about the abm85h entries:
18816 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
18817 # firmware revs prior to SP51
18818 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
18819 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
18820 # in some places and NOT software settable i.e., <is2> can't fix it)
18821 # 3) In 85h mode, the arrow keys and special functions transmit when
18822 # the terminal is in dup-edit, and work only locally in local-edit.
18823 # Vi won't swallow `del char' for instance, but <smcup> turns on
18824 # dup-edit anyway so that the arrow keys will work right. If the
18825 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
18826 # <is2>. Note that 920E mode does not have software commands to toggle
18827 # between dup and local edit, so you get whatever was set last on the
18829 # 4) <flash> attribute is nice, but seems too slow to work correctly
18831 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
18832 # are selected, the <xmc@> entry should be removed.
18833 # 6) auto new-line should be on (selectable from setup mode only)
18835 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
18836 abm85h|Kimtron ABM 85H native mode,
18839 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
18841 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
18843 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
18845 abm85e|Kimtron ABM 85H in 920E mode,
18847 bel=^G, dim=\E), flash@,
18848 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
18850 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18851 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
18854 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
18856 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
18857 # From: <malman@bbn-vax.arpa>
18858 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
18859 kt7|kimtron model kt-7,
18861 cols#80, it#8, lines#24,
18862 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
18863 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18864 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
18865 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
18866 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
18867 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
18868 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18869 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18870 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
18871 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
18872 # other kt7 entry and the adjacent key capabilities). Removed EE which is
18873 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
18874 # but we can't figure out what.
18875 kt7ix|kimtron model kt-7 or 70 in IX mode,
18877 cols#80, it#8, lines#25,
18878 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
18879 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
18880 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18881 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
18882 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
18883 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
18884 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
18885 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
18886 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18887 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
18888 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
18889 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
18891 #### Microdata/MDIS
18893 # This was a line of terminals made by McDonnell-Douglas Information Systems.
18894 # These entries come direct from MDIS documentation. I have edited them only
18895 # to move primary names of the form p[0-9] * to aliases, and to comment out
18896 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
18897 # also removed the change history; the last version indicates this is
18898 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
18901 # McDonnell Information Systems Terminal Family History
18902 # =========================================
18904 # Prism-1, Prism-2 and P99:
18905 # Ancient Microdata and CMC terminals, vaguely like ADDS Regent 25.
18907 # Prism-4 and Prism-5:
18908 # Slightly less ancient range of Microdata terminals. Follow-on from
18909 # Prism-2, but with many enhancements. P5 has eight display pages.
18912 # A special terminal for use with library systems, primarily in Germany.
18913 # Limited numbers. Similar functionality to P5 (except attributes?).
18915 # Prism-7, Prism-8 and Prism-9:
18916 # More recent range of MDIS terminals, in which P7 and P8
18917 # replace the P4 & P5, with added functionality, and P9 is the flagship.
18918 # The P9 has two emulation modes - P8 and ANSI - and includes a
18919 # large number of the DEC VT220 control sequences. Both
18920 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
18922 # Prism-12 and Prism-14:
18923 # Latest range, functionally very similar to the P9. The P14 has a
18924 # black-on-white overscanning screen.
18926 # The terminfo definitions given here are:
18928 # p2 - Prism-2 (or Prism-1 or P99).
18930 # p4 - Prism-4 (and older P7s & P8s).
18931 # p5 - Prism-5 (or Prism-6).
18934 # p8 - Prism-8 (in national or multinational mode).
18935 # p8-w - 132 column version of p8.
18936 # p9 - Prism-9 in ANSI mode.
18937 # p9-w - 132 column version of p9.
18938 # p9-8 - Prism-9 in Prism-8 emulation mode.
18939 # p9-8-w - As p9-8, but with 132 columns.
18941 # p12 - Prism-12 in ANSI mode.
18942 # p12-w - 132 column version of p12.
18943 # p12-m - Prism-12 in MDC emulation mode.
18944 # p12-m-w - As p12-m, but with 132 columns.
18945 # p14 - Prism-14 in ANSI mode.
18946 # p14-w - 132 column version of p14.
18947 # p14-m - Prism-14 in MDC emulation mode.
18948 # p14-m-w - As p14-m, but with 132 columns.
18953 # Includes Prism-1 and basic P99 without SP or MP loaded.
18954 # The simplest form of Prism-type terminal.
18955 # Basic cursor movement and clearing operations only.
18956 # No video attributes.
18958 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18959 # value up, followed by backspace.
18961 prism2|MDC Prism-2,
18964 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18965 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18966 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18967 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
18968 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18969 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18970 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
18975 # Includes early versions of P7 & P8.
18976 # Basic family definition for most Prisms (except P2 and P9 ANSI).
18978 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
18979 # value up, followed by backspace.
18980 # Cursor key definitions removed because they interfere with vi and csh keys.
18982 prism4|p4|P4|MDC Prism-4,
18983 am, bw, hs, mc5i, msgr,
18984 cols#80, lines#24, wsl#72, xmc#1,
18985 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
18986 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18987 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
18988 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18989 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
18990 fsl=\035\345, home=^A,
18991 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
18992 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
18993 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
18994 rev=^CD, rmso=^C\s, rmul=^C\s,
18995 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
18996 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
18997 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
18998 vpa=\013%p1%{32}%+%c,
19003 # Same definition as p4. Includes Prism-6 (not tested!).
19004 # Does not use any multi-page features.
19006 prism5|p5|P5|MDC Prism-5,
19012 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
19014 # Use p4 for very early models of P7.
19015 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
19017 prism7|p7|P7|MDC Prism-7,
19018 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
19023 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
19024 # Supports national and multinational character sets.
19026 # Alternate char set operations only work in multinational mode.
19027 # Use p4 for very early models of P8.
19028 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
19029 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
19031 prism8|p8|P8|MDC Prism-8,
19032 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
19033 vpa=\E[%i%p1%dd, use=p4,
19035 # p8-w: Prism-8 in 132 column mode
19036 # --------------------------------
19038 # 'Wide' version of p8.
19040 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
19042 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
19044 is2=\E[<12h\E[<14h, use=p8,
19046 # p9: Prism-9 in ANSI mode
19047 # -------------------------
19049 # The "flagship" model of this generation of terminals.
19050 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
19052 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
19053 # Fixes to deal with terminal firmware bugs:
19054 # . 'ri' uses insert-line since rev index doesn't always
19055 # . 'sgr0' has extra '0' since esc[m fails
19056 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
19057 # Not covered in the current definition:
19059 # . Programming Fn keys
19060 # . Graphic characters (defaults correctly to vt100)
19061 # . Padding values (sets xon)
19062 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
19064 prism9|p9|P9|MDC Prism-9 in ANSI mode,
19065 am, bw, hs, msgr, xenl, xon,
19066 cols#80, it#8, lines#24, vt#3, wsl#72,
19067 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
19068 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
19069 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19070 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19071 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19072 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
19073 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
19074 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
19075 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
19076 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
19077 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
19078 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
19079 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
19080 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19081 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
19082 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
19083 rmso=\E[27m, rmul=\E[24m,
19084 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
19087 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
19088 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
19089 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
19090 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
19093 # p9-w: Prism-9 in 132 column mode
19094 # --------------------------------
19096 # 'Wide' version of p9.
19098 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
19100 is2=\E[&p\E[<12l\E F\E[<14h,
19101 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
19103 # p9-8: Prism-9 in P8 mode
19104 # ------------------------
19106 # P9 terminal in P8 emulation mode.
19107 # Similar to p8 definition.
19108 # Insertion and deletion operations possible.
19110 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
19111 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19112 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
19114 # p9-8-w: Prism-9 in P8 and 132 column modes
19115 # ------------------------------------------
19117 # P9 terminal in P8 emulation mode and 132 column mode.
19119 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
19120 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19121 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
19123 # p12: Prism-12 in ANSI mode
19124 # ---------------------------
19126 # See p9 definition.
19128 prism12|p12|P12|MDC Prism-12 in ANSI mode,
19131 # p12-w: Prism-12 in 132 column mode
19132 # ----------------------------------
19134 # 'Wide' version of p12.
19136 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
19139 # p12-m: Prism-12 in MDC emulation mode
19140 # -------------------------------------
19142 # P12 terminal in MDC emulation mode.
19143 # Similar to p8 definition.
19144 # Insertion and deletion operations possible.
19146 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
19149 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
19150 # -------------------------------------------------------
19152 # P12 terminal in MDC emulation mode and 132 column mode.
19154 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
19157 # p14: Prism-14 in ANSI mode
19158 # ---------------------------
19160 # See p9 definition.
19162 prism14|p14|P14|MDC Prism-14 in ANSI mode,
19165 # p14-w: Prism-14 in 132 column mode
19166 # ----------------------------------
19168 # 'Wide' version of p14.
19170 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
19173 # p14-m: Prism-14 in MDC emulation mode
19174 # -------------------------------------
19176 # P14 terminal in MDC emulation mode.
19177 # Similar to p8 definition.
19178 # Insertion and deletion operations possible.
19180 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
19183 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
19184 # -------------------------------------------------------
19186 # P14 terminal in MDC emulation mode and 132 column mode.
19188 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
19191 # End of McDonnell Information Systems Prism definitions
19193 # These things were popular in the Pick database community at one time
19194 # From: George Land <georgeland@aol.com> 24 Sep 1996
19195 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
19197 cols#80, lines#24, ma#1, wsl#78, xmc#1,
19198 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
19199 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
19200 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
19201 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
19202 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
19203 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
19204 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19205 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
19206 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
19207 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
19210 #### Microterm (act, mime)
19212 # The mime1 entries refer to the Microterm Mime I or Mime II.
19213 # The default mime is assumed to be in enhanced act iv mode.
19216 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
19217 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
19218 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
19219 # since Sytek insists ^S means xoff.
19220 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
19221 act4|microterm|microterm act iv,
19224 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
19225 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
19226 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
19227 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
19228 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
19230 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
19231 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
19232 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
19233 act5|microterm5|microterm act v,
19234 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
19236 # Mimes using brightness for standout. Half bright is really dim unless
19237 # you turn up the brightness so far that lines show up on the screen.
19238 mime-fb|full bright mime1,
19239 is2=^S\E, rmso=^S, smso=^Y, use=mime,
19240 mime-hb|half bright mime1,
19241 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
19242 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
19243 # the more plausible ":do=^J:" -- esr)
19244 # uc was at one time disabled to get around a curses bug, be wary of it
19245 mime|mime1|mime2|mimei|mimeii|microterm mime1,
19247 cols#80, it#8, lines#24, vt#9,
19248 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
19249 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
19250 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
19251 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
19252 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
19253 # These termcaps (for mime2a) put the terminal in low intensity mode
19254 # since high intensity mode is so obnoxious.
19255 mime2a-s|microterm mime2a (emulating an enhanced Soroc iq120),
19258 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19259 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
19260 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
19261 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
19262 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
19263 smir=\EE, smso=\E:, smul=\E6,
19264 # This is the preferred mode (but ^X can't be used as a kill character)
19265 mime2a|mime2a-v|microterm mime2a (emulating an enhanced VT52),
19267 cols#80, it#8, lines#24,
19268 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19269 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
19270 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
19271 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
19272 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
19273 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
19274 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
19275 mime3a|mime1 emulating 3a,
19277 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
19278 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
19280 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
19282 # Wed Mar 9 18:53:21 1983
19283 # We run our terminals at 2400 baud, so there might be some timing problems at
19284 # higher speeds. The major improvements in this model are the terminal now
19285 # scrolls down and insert mode works without redrawing the rest of the line
19286 # to the right of the cursor. This is done with a bit of a kludge using the
19287 # exit graphics mode to get out of insert, but it does not appear to hurt
19288 # anything when using vi at least. If you have some users using act4s with
19289 # programs that use curses and graphics mode this could be a problem.
19290 mime314|mm314|mime 314,
19293 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
19294 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
19295 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
19296 # Microterm mime 340 from University of Wisconsin
19297 mm340|mime340|mime 340,
19299 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19300 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19301 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
19302 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
19303 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
19304 # This came from University of Wisconsin marked "astro termcap for jooss".
19305 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
19306 # also added <rmam>/<smam> based on the init string -- esr)
19307 mt4520-rv|micro-term 4520 reverse video,
19308 am, hs, msgr, xenl, xon,
19309 cols#80, it#8, lines#24, wsl#80,
19310 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
19311 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19312 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19313 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19314 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19315 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
19316 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
19317 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
19318 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
19320 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19321 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
19322 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
19323 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
19324 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
19325 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
19326 tbc=\E[g, tsl=\E[25;1H,
19328 # Fri Aug 5 08:11:57 1983
19329 # This entry works for the ergo 4000 with the following setups:
19330 # ansi,wraparound,newline disabled, xon/xoff disabled in both
19333 # WARNING!!! There are multiple versions of ERGO 4000 microcode
19334 # Be advised that very early versions DO NOT WORK RIGHT !!
19335 # Microterm does have a ROM exchange program- use it or lose big
19336 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
19337 ergo4000|microterm ergo 4000,
19340 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
19341 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19342 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
19343 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
19344 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
19345 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19346 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
19347 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
19348 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
19349 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
19354 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
19355 # For what happened to that group, see the ADDS section.
19357 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
19360 # The following vendor-supplied termcaps were captured from the Boundless
19361 # Technologies site, 8 March 1998. I removed all-upper-case names that were
19362 # identical, except for case, to lower-case ones. I also uncommented the acsc
19365 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19366 # DEC VT200/300 with color capabilities added.
19367 ncr260intan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard,
19368 colors#8, pairs#64,
19369 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19370 use=decid+cpr, use=ncr260vt300an,
19371 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19372 # DEC VT200/300 with color capabilities added.
19373 ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard (132 column),
19374 colors#8, pairs#64,
19375 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19376 use=decid+cpr, use=ncr260vt300wan,
19377 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19378 # DEC VT200/300 with color capabilities added.
19379 ncr260intpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard,
19380 colors#8, pairs#64,
19381 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19383 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
19384 # DEC VT200/300 with color capabilities added.
19385 ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard (132 column),
19386 colors#8, pairs#64,
19387 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
19388 use=ncr260vt300wpp,
19389 # This definition for ViewPoint supports several attributes. This means
19390 # that it has magic cookies (extra spaces where the attributes begin).
19391 # Some applications do not function well with magic cookies. The System
19392 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19393 # If supporting various attributes is not vital, 'xmc#1' and the extra
19394 # attributes can be removed.
19395 # Mapping to ASCII character set ('acsc' capability) can also be
19396 # restored if needed.
19397 ncr260vppp|NCR 2900/260 viewpoint,
19398 am, bw, km, mc5i, mir, msgr, xon,
19399 cols#80, lines#24, nlab#32, xmc#1,
19400 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19401 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
19402 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
19403 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
19404 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, ed=\Ek$<2>,
19405 el=\EK$<2>, home=\036$<2>, ht=^I, hts=\E1, il1=\EM$<2>,
19406 ind=\n$<2>, invis=\EG1,
19407 is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19409 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
19410 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
19411 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B:\r,
19412 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
19413 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
19414 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
19415 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
19416 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
19417 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
19418 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
19419 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
19420 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
19421 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
19422 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19423 rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19425 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
19426 smso=\EG4, smul=\EG8, smxon=\Ec21, use=ncr260vp+sl,
19428 ncr260vp+sl|NCR 2900/260 viewpoint with status-line,
19430 dsl=\E`c, fsl=\r, tsl=\EF,
19432 ncr260vpwpp|NCR 2900/260 viewpoint wide mode,
19434 cup=\Ea%i%p1%dR%p2%dC$<30>,
19435 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19437 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
19441 ncr260vt100an|NCR 2900/260 VT100 with ANSI keyboard,
19442 am, mir, msgr, xenl, xon,
19443 cols#80, lines#24, nlab#32,
19444 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19445 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19446 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
19447 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
19448 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19449 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19450 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19451 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX,
19452 ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, home=\E[H$<1>,
19453 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19454 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19455 indn=\E[%p1%dE$<5>, invis=\E[8m,
19456 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19458 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19459 khlp=\E[28~, kich1=\E[2~, krdo=\E[29~, nel=\EE$<5>, rc=\E8,
19460 rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
19461 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
19462 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19465 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19466 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19467 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
19468 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
19469 vpa=\E[%p1%dd$<40>, use=decid+cpr, use=vt220+vtedit,
19470 use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl,
19471 ncr260vt+sl|NCR 2900/260 VT100 status line,
19473 dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
19474 ncr260vt100wan|NCR 2900/260 VT100 wide mode ANSI keyboard,
19476 cup=\E[%i%p1%d;%p2%dH$<30>,
19477 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19479 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19482 ncr260vt100pp|NCR 2900/260 VT100 with PC+ keyboard,
19483 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19485 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19486 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19487 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
19488 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
19489 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19491 smkx=\E=, use=ncr260vt100an,
19492 ncr260vt100wpp|NCR 2900/260 VT100 wide mode PC+ keyboard,
19494 cup=\E[%i%p1%d;%p2%dH$<30>,
19495 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19497 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19500 ncr260vt200an|NCR 2900/260 VT200 with ANSI keyboard,
19501 am, mir, msgr, xenl, xon,
19502 cols#80, lines#24, nlab#32,
19503 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19504 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19505 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
19506 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
19507 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19508 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19509 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19510 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19511 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19512 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19513 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19514 indn=\E[%p1%dE$<5>, invis=\E[8m,
19515 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19517 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19518 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19519 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19520 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
19521 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
19522 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
19523 kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, kf31=\E[6~,
19524 kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf4=\EOS,
19525 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19526 khlp=\E[28~, krdo=\E[29~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
19527 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
19528 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
19530 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19533 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19534 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19535 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19536 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19537 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr,
19538 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
19540 ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard,
19542 cup=\E[%i%p1%d;%p2%dH$<30>,
19543 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
19544 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
19545 ncr260vt200pp|NCR 2900/260 VT200 with PC+ keyboard,
19546 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19547 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19548 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19549 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19551 ncr260vt200wpp|NCR 2900/260 VT200 wide mode PC+ keyboard,
19553 cup=\E[%i%p1%d;%p2%dH$<30>,
19554 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19556 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
19559 ncr260vt300an|NCR 2900/260 VT300 with ANSI keyboard,
19560 am, mir, msgr, xenl, xon,
19561 cols#80, lines#24, nlab#32,
19562 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19563 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
19564 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
19565 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
19566 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
19567 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
19568 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
19569 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>,
19570 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H,
19571 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>,
19572 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>,
19573 indn=\E[%p1%dE$<5>, invis=\E[8m,
19574 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19576 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19577 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
19578 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
19579 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
19580 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
19581 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
19582 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~,
19583 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
19584 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i,
19585 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>,
19586 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
19587 rmso=\E[27m, rmul=\E[24m,
19588 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19591 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19592 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
19593 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
19594 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19595 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr,
19596 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad,
19598 ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard,
19600 cup=\E[%i%p1%d;%p2%dH$<30>,
19601 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19603 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
19606 ncr260vt300pp|NCR 2900/260 VT300 with PC+ keyboard,
19607 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
19608 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
19609 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19610 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
19612 ncr260vt300wpp|NCR260VT300WPP|NCR 2900/260 VT300 wide mode PC+ keyboard,
19614 cup=\E[%i%p1%d;%p2%dH$<30>,
19615 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19617 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
19620 # This terminfo file contains color capabilities for the Wyse325 emulation of
19621 # the NCR 2900/260C color terminal. Because of the structure of the command
19622 # (escape sequence) used to set color attributes, one of the fore/background
19623 # colors must be preset to a given value. I have set the background color to
19624 # black. The user can change this setup by altering the last section of the
19625 # 'setf' definition. The escape sequence to set color attributes is
19626 # ESC d y <foreground_color> <background_color> 1
19627 # In addition, the background color can be changed through the desk accessories.
19628 # The capability 'op' sets colors to green on black (default combination).
19630 # NOTE: The NCR Unix System Administrator's Shell will not function properly
19631 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
19632 # capability and recompile if you wish to have it included.
19634 ncr260wy325pp|NCR 2900/260 Wyse 325,
19635 am, bw, km, mc5i, mir, msgr, xon,
19636 colors#16, cols#80, lines#24, ncv#33, nlab#32,
19637 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19638 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
19639 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19640 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19641 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19642 el=\Et$<5>, home=\036$<5>, ht=^I, hts=\E1, il1=\EE$<5>,
19643 ind=\n$<5>, invis=\EG1,
19644 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19646 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19647 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
19648 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
19649 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
19650 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
19651 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
19652 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
19653 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
19654 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19655 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
19656 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19657 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19658 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19659 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19660 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19663 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19664 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19665 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
19666 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
19667 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
19668 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
19669 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
19670 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19672 ncr260wy325wpp|NCR 2900/260 Wyse 325 wide mode,
19674 cup=\Ea%i%p1%dR%p2%dC$<30>,
19675 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19677 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19680 # This definition for Wyse 350 supports several attributes. This means
19681 # that it has magic cookies (extra spaces where the attributes begin).
19682 # Some applications do not function well with magic cookies. The System
19683 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19684 # If supporting various attributes is not vital, 'xmc#1' and the extra
19685 # attributes can be removed.
19686 # Mapping to ASCII character set ('acsc' capability) can also be
19687 # restored if needed.
19688 # In addition, color capabilities have been added to this file. The drawback,
19689 # however, is that the background color has to be black. The foreground colors
19690 # are numbered 0 through 15.
19692 # NOTE: The NCR Unix System Administrator's Shell does not function properly
19693 # with the 'pairs' capability defined as below. If you wish to
19694 # have it included, Un-comment it and recompile (using 'tic').
19696 ncr260wy350pp|NCR 2900/260 Wyse 350,
19697 am, bw, km, mc5i, mir, msgr, xon,
19698 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
19699 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19700 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19701 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19702 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
19703 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>,
19704 ed=\Ey$<5>, el=\Et$<5>, home=\036$<10>, ht=^I, hts=\E1,
19705 il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19706 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19708 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19709 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19710 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19711 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19712 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19713 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19714 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19715 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19716 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19717 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19718 mc0=\EP$<10>, mc4=^T, mc5=^R,
19719 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
19720 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
19721 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19722 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9
19725 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
19726 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
19727 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
19728 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
19729 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
19730 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
19731 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
19732 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
19734 ncr260wy350wpp|NCR 2900/260 Wyse 350 wide mode,
19736 cup=\Ea%i%p1%dR%p2%dC$<30>,
19737 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19739 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
19742 # This definition for Wyse 50+ supports several attributes. This means
19743 # that it has magic cookies (extra spaces where the attributes begin).
19744 # Some applications do not function well with magic cookies. The System
19745 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
19746 # If supporting various attributes is not vital, 'xmc#1' and the extra
19747 # attributes can be removed.
19748 # Mapping to ASCII character set ('acsc' capability) can also be
19749 # restored if needed.
19750 # (ncr260wy50+pp: originally contained commented-out
19751 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
19752 ncr260wy50+pp|NCR 2900/260 Wyse 50+,
19753 am, bw, km, mc5i, mir, msgr, xon,
19754 cols#80, lines#24, nlab#32, xmc#1,
19755 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19756 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
19757 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19758 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
19759 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>,
19760 ed=\EY$<5>, el=\ET$<5>, home=\036$<10>, ht=\011$<5>,
19761 hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19762 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19763 \Ee4\Ex@\E`9\Ee7$<100>,
19764 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
19765 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
19766 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
19767 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19768 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
19769 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
19770 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
19771 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
19772 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
19773 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
19774 mc0=\EP$<10>, mc4=^T, mc5=^R,
19775 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
19776 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19777 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19778 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19779 \Ee4\Ex@\E`9\Ee7$<100>,
19780 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
19781 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>,
19783 ncr260wy50+wpp|NCR 2900/260 Wyse 50+ wide mode,
19785 cup=\Ea%i%p1%dR%p2%dC$<30>,
19786 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19787 \Ee4\Ex@\E`9\Ee7$<200>,
19788 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19789 \Ee4\Ex@\E`9\Ee7$<200>,
19791 ncr260wy60pp|NCR 2900/260 Wyse 60,
19792 am, bw, km, mc5i, mir, msgr, xon,
19793 cols#80, lines#24, nlab#32,
19794 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2,
19795 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
19796 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
19797 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
19798 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>,
19799 el=\Et$<5>, home=\036$<25>, ht=\011$<15>, hts=\E1$<15>,
19800 il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
19801 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19802 \Ee4\Ex@\E`9\Ee7$<100>,
19803 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
19804 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
19805 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19806 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
19807 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
19808 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
19809 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
19810 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
19811 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
19812 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19813 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
19814 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
19815 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
19816 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
19817 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"
19818 \Ee4\Ex@\E`9\Ee7$<100>,
19819 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
19820 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
19822 ncr260wy60wpp|NCR 2900/260 Wyse 60 wide mode,
19824 cup=\Ea%i%p1%dR%p2%dC$<30>,
19825 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19826 \Ee4\Ex@\E`9\Ee7$<100>,
19827 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
19828 \Ee4\Ex@\E`9\Ee7$<100>,
19830 ncr160vppp|NCR 2900/160 viewpoint,
19832 ncr160vpwpp|NCR 2900/160 viewpoint wide mode,
19834 ncr160vt100an|NCR 2900/160 VT100 with ANSI keyboard,
19836 ncr160vt100pp|NCR 2900/160 VT100 with PC+ keyboard,
19838 ncr160vt100wan|NCR 2900/160 VT100 wide mode ANSI keyboard,
19839 use=ncr260vt100wan,
19840 ncr160vt100wpp|NCR 2900/160 VT100 wide mode PC+ keyboard,
19841 use=ncr260vt100wpp,
19842 ncr160vt200an|NCR 2900/160 VT200 with ANSI keyboard,
19844 ncr160vt200pp|NCR 2900/160 VT200 with PC+ keyboard,
19846 ncr160vt200wan|NCR 2900/160 VT200 wide mode ANSI keyboard,
19847 use=ncr260vt200wan,
19848 ncr160vt200wpp|NCR 2900/160 VT200 wide mode PC+ keyboard,
19849 use=ncr260vt200wpp,
19850 ncr160vt300an|NCR 2900/160 VT300 with ANSI keyboard,
19852 ncr160vt300pp|NCR 2900/160 VT300 with PC+ keyboard,
19854 ncr160vt300wan|NCR 2900/160 VT300 wide mode ANSI keyboard,
19855 use=ncr260vt300wan,
19856 ncr160vt300wpp|NCR 2900/160 VT300 wide mode PC+ keyboard,
19857 use=ncr260vt300wpp,
19858 ncr160wy50+pp|NCR 2900/160 Wyse 50+,
19860 ncr160wy50+wpp|NCR 2900/160 Wyse 50+ wide mode,
19861 use=ncr260wy50+wpp,
19862 ncr160wy60pp|NCR 2900/160 Wyse 60,
19864 ncr160wy60wpp|NCR 2900/160 Wyse 60 wide mode,
19866 ncrvt100an|ncrvt100pp|NCR VT100 for the 2900 terminal,
19867 am, hs, mc5i, mir, msgr, xon,
19868 cols#80, it#8, lines#24, nlab#32,
19869 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
19870 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
19871 clear=\E[2J\E[1;1H$<300>, cr=\r,
19872 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
19873 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
19874 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
19875 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
19876 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
19877 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
19878 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
19879 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
19880 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
19882 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
19883 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
19884 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
19885 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
19886 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
19887 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
19888 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
19889 B\E)0\E%/0n\E[P\031$<200>,
19891 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
19892 %p3%|%t;7%;%?%p4%t;5%;m$<120>,
19893 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
19894 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
19895 tsl=\E[>+1$<70>, use=decid+cpr,
19896 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
19898 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
19899 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
19900 \E)0\E%/0n\E[P\031$<200>,
19903 # Vendor-supplied NCR termcaps end here
19905 # NCR7900 DIP switches:
19909 # 5 - Parity (Odd/Even)
19910 # 6 - Don't Send or Do Send Spaces
19911 # 7 - Parity Enable
19912 # 8 - Stop Bits (One/Two)
19915 # 1 - Upper/Lower Shift
19916 # 2 - Typewriter Shift
19917 # 3 - Half Duplex / Full Duplex
19918 # 4 - Light/Dark Background
19919 # 5-6 - Carriage Return Without / With Line Feed
19920 # 7 - Extended Mode
19921 # 8 - Suppress Keyboard Display
19924 # 1 - End of line entry disabled/enabled
19925 # 2 - Conversational mode / (Local?) Mode
19926 # 3 - Control characters displayed / not displayed
19927 # 4 - (2-wire?) / 4-wire communications
19928 # 5 - RTS on and off for each character
19929 # 6 - (50Hz?) / 60 Hz
19930 # 7 - Exit after level zero diagnostics
19931 # 8 - RS-232 interface
19934 # 1 - Reverse Channel (yes / no)
19935 # 2 - Manual answer (no / yes)
19936 # 3-4 - Cursor appearance
19937 # 5 - Communication Rate
19938 # 6 - Enable / Disable EXT turnoff
19939 # 7 - Enable / Disable CR turnoff
19940 # 8 - Enable / Disable backspace
19942 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
19943 # reverse, blink, dim, and underline) the appropriate number of bits (by
19944 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
19945 # '@' is (effectively) "or"ed with each attribute to generate the proper third
19946 # character in the <ESC>0 sequence. The <sgr> string implements the following
19949 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
19950 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
19952 # Where: P1 <==> Standout attribute parameter
19953 # P2 <==> Underline attribute parameter
19954 # P3 <==> Reverse attribute parameter
19955 # P4 <==> Blink attribute parameter
19956 # P5 <==> Dim attribute parameter
19957 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
19958 ncr7900i|ncr7900|n7900|NCR 7900 model 1,
19960 cols#80, lines#24, xmc#1,
19961 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
19962 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
19963 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
19964 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
19966 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19968 sgr0=\E0@, smso=\E0Q, smul=\E0`,
19969 ncr7900iv|NCR 7900 model 4,
19972 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
19973 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
19974 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
19975 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
19976 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
19977 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
19978 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
19979 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
19980 # The user can enter a CTRL-B to get out of this locked state.
19981 # In <hpa>, we want to output the character given by the formula:
19982 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
19983 ncr7901|NCR 7901 model,
19986 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
19987 cub1=^H, cud1=\n, cuf1=^F,
19988 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
19990 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
19991 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
19992 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
19993 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
19995 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
19996 vpa=\013%p1%{64}%+%c,
19998 # Newbury Data Recording Limited (Newbury Data)
20000 # Have been manufacturing and reselling various peripherals for a long time
20001 # They don't make terminals anymore, but are still in business (in 2007).
20002 # Their e-mail address is at ndsales@newburydata.co.uk
20003 # and their post address is:
20005 # Newbury Data Recording Ltd,
20006 # Premier Park, Road One,
20007 # Winsford, Cheshire, CW7 3PT
20009 # Their technical support is still good, they sent me for free a printed copy
20010 # of the 9500 user manual and I got it just 1 week after I first contacted them
20014 # Manufactured in the early/mid eighties, behaves almost the same as a
20015 # TeleVideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
20016 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
20017 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
20018 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
20019 # recognized: if you type in "ESC !", the next (third) character is not
20020 # echoed, showing that the terminal was actually waiting for a parameter!
20021 ndr9500|nd9500|Newbury Data 9500,
20022 am, bw, hs, mc5i, mir, msgr, ul, xon,
20023 cols#80, lines#24, wsl#79,
20024 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
20025 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
20026 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20027 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
20028 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
20029 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
20030 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
20031 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
20032 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
20033 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
20034 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
20035 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20036 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20037 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
20038 pfloc=\E|%{48}%p1%+%c2%p2%s\031,
20039 pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej,
20040 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
20041 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
20042 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
20043 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
20045 ndr9500-nl|NDR 9500 with no status line,
20048 dsl@, fsl@, tsl@, use=ndr9500,
20050 ndr9500-25|NDR 9500 with 25th line enabled,
20051 lines#25, use=ndr9500,
20053 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
20054 lines#25, use=ndr9500-nl,
20056 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
20059 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
20060 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
20061 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
20062 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
20064 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
20065 lines#25, use=ndr9500-mc,
20067 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
20070 dsl@, fsl@, tsl@, use=ndr9500-mc,
20072 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
20073 lines#25, use=ndr9500-mc-nl,
20075 #### Perkin-Elmer (Owl)
20077 # These are official terminfo entries from within Perkin-Elmer.
20080 bantam|pe550|pe6100|Perkin Elmer 550,
20083 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20084 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
20085 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
20086 fox|pe1100|Perkin Elmer 1100,
20089 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
20090 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
20091 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
20092 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
20093 owl|pe1200|Perkin Elmer 1200,
20096 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
20097 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
20098 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
20099 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
20100 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
20101 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
20102 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
20103 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
20104 pe1251|pe6300|pe6312|Perkin Elmer 1251,
20106 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
20107 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
20108 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
20109 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
20110 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
20111 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
20112 # (pe7000m: this had
20113 # rmul=\E!\0, smul=\E!\040,
20114 # which is probably wrong, it collides with kf0
20115 pe7000m|Perkin Elmer 7000 series monochrome monitor,
20118 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
20119 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20120 ed=\EJ, el=\EI, home=\EH, ind=\n,
20121 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
20122 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
20123 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
20124 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
20126 pe7000c|Perkin Elmer 7000 series colour monitor,
20127 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
20128 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
20132 # Sperry Univac has merged with Burroughs to form Unisys.
20135 # This entry is for the Sperry UTS30 terminal running the TTY
20136 # utility under control of CP/M Plus 1R1. The functionality
20137 # provided is comparable to the DEC VT100.
20138 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
20139 uts30|Sperry UTS30 with cp/m@1R1,
20141 cols#80, lines#24, wsl#40,
20142 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20143 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
20144 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
20145 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20146 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20147 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
20148 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
20149 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
20150 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
20151 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
20152 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
20153 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
20154 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
20155 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
20156 smul=\E[4m, tsl=\E], uc=\EPB,
20160 # Tandem builds these things for use with its line of fault-tolerant
20161 # transaction-processing computers. They aren't generally available
20162 # on the merchant market, and so are fairly uncommon.
20165 tandem6510|adm3a repackaged by Tandem,
20168 # A funny series of terminal that TANDEM uses. The actual model numbers
20169 # have a fourth digit after 653 that designates minor variants. These are
20170 # natively block-mode and rather ugly, but they have a character mode which
20171 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
20172 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
20173 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
20174 tandem653|t653x|Tandem 653x multipage terminal,
20175 OTbs, am, da, db, hs,
20176 cols#80, lines#24, wsl#64, xmc#1,
20177 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
20178 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
20179 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
20180 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
20182 #### Tandy/Radio Shack
20184 # Tandy has a line of VDTs distinct from its microcomputers.
20187 dmterm|deskmate terminal,
20190 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
20191 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20192 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
20193 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
20194 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
20195 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
20196 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
20197 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
20199 dt100|dt-100|Tandy DT-100 terminal,
20201 cols#80, lines#24, xmc#1,
20202 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
20203 cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
20204 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20205 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20206 ich1=\E[@, il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B,
20207 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
20208 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
20209 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
20210 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
20211 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
20212 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
20214 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
20215 cols#132, use=dt100,
20216 dt110|Tandy DT-110 emulating ANSI,
20219 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
20220 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20221 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20222 dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0,
20223 home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n,
20224 is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20225 kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~,
20226 kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~,
20227 kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~,
20228 kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
20229 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m,
20230 rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
20232 pt210|TRS-80 PT-210 printing terminal,
20235 bel=^G, cr=\r, cud1=\n, ind=\n,
20237 #### Tektronix (tek)
20239 # Tektronix tubes are graphics terminals. Most of them use modified
20240 # oscilloscope technology incorporating a long-persistence green phosphor,
20241 # and support vector graphics on a main screen with an attached "dialogue
20242 # area" for interactive text.
20245 tek|tek4012|Tektronix 4012,
20248 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
20249 ff=\014$<1000>, is2=\E^O,
20250 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20251 tek4013|Tektronix 4013,
20252 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
20253 tek4014|Tektronix 4014,
20255 is2=\E\017\E9, use=tek4012,
20256 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20257 tek4015|Tektronix 4015,
20258 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
20259 tek4014-sm|Tektronix 4014 in small font,
20260 cols#121, lines#58,
20261 is2=\E\017\E:, use=tek4014,
20262 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
20263 tek4015-sm|Tektronix 4015 in small font,
20264 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
20265 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
20267 # You need to have "stty nl2" in effect. Some versions of tset(1) know
20268 # how to set it for you.
20270 # It's got the Magic Cookie problem around stand-out mode. If you can't
20271 # live with Magic Cookie, remove the :so: and :se: fields and do without
20272 # reverse video. If you like reverse video stand-out mode but don't want
20273 # it to flash, change the letter 'H' to 'P' in the :so: field.
20274 tek4023|Tektronix 4023,
20276 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
20277 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
20278 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
20279 rmso=^_@, smso=^_P,
20280 # It is recommended that you run the 4025 at 4800 baud or less;
20281 # various bugs in the terminal appear at 9600. It wedges at the
20282 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
20283 # on keyboard don't work. You have to hit BREAK twice to get
20284 # one break at any speed - this is a documented feature.
20285 # Can't use cursor motion because it's memory relative, and
20286 # because it only works in the workspace, not the monitor.
20287 # Same for home. Likewise, standout only works in the workspace.
20289 # <el> was commented out since vi and rogue seem to work better
20290 # simulating it with lots of spaces!
20292 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
20293 # and didn't seem necessary.
20295 tek4024|tek4025|tek4027|Tektronix 4024/4025/4027,
20297 cols#80, it#8, lines#34, lm#0,
20298 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
20299 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
20300 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
20301 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
20302 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
20303 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
20304 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
20306 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20307 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
20309 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
20310 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
20311 tek4025-17|Tektronix 4025 17 line window,
20312 lines#17, use=tek4025,
20313 tek4025-17-ws|Tektronix 4025 17 line window in workspace,
20314 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
20315 \r\037wor\s17\r\037mon\s17\r,
20316 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
20317 smso=\037att e\r, use=tek4025-17,
20318 tek4025-ex|tek4027-ex|Tektronix 4025/4027 w/!,
20319 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
20320 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20322 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
20323 # The following status modes are assumed for normal operation (replace the
20324 # initial "!" by whatever the current command character is):
20325 # !COM 29 # NOTE: changes command character to GS (^])
20331 # ^]STO 9 17 25 33 41 49 57 65 73
20332 # Other modes may be set according to communication requirements.
20333 # If the command character is inadvertently changed, termcap can't restore it.
20334 # Insert-character cannot be made to work on both top and bottom rows.
20335 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
20336 # There also seems to be a problem with vertical motion, perhaps involving
20337 # delete/insert-line, following a typed carriage return. This terminal sucks.
20338 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20339 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
20340 # work any more. -- esr)
20341 tek4025a|Tektronix 4025A,
20342 OTbs, OTpt, am, bw, da, db, xon,
20343 cols#80, it#8, lines#34,
20344 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
20345 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
20346 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
20347 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
20348 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
20349 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
20350 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
20351 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
20352 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
20353 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
20354 \s33\s41\s49\s57\s65\s73\035wor\s0;,
20356 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
20357 # Here's the command file that I use to get rogue to work on the 4025.
20358 # It should work with any program using the old curses (e.g. it better
20359 # not try to scroll, or cursor addressing won't work. Also, you can't
20361 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
20362 tek4025-cr|Tektronix 4025 for curses and rogue,
20364 cols#80, it#8, lines#33,
20365 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
20366 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
20367 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
20368 rmcup=\037wor 0, smcup=\037wor 33h,
20369 # next two lines commented out since curses only allows 128 chars, sigh.
20370 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
20371 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
20372 tek4025ex|4025ex|4027ex|Tektronix 4025 w/!,
20373 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
20375 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
20376 tek4105|Tektronix 4105,
20377 OTbs, am, mir, msgr, ul, xenl, xt,
20378 cols#79, it#8, lines#29,
20379 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
20380 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
20381 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
20382 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20383 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
20384 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
20385 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
20386 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
20387 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
20388 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20389 smul=\E[=5;<2m, tbc=\E[1g,
20391 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
20392 tek4105-30|Tektronix 4015 emulating 30 line VT100,
20393 am, mir, msgr, xenl, xon,
20394 cols#80, it#8, lines#30, vt#3,
20395 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20396 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
20397 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20398 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20399 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20400 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20401 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
20402 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
20403 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
20404 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20405 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
20406 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
20407 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
20408 %;m%?%p9%t\016%e\017%;$<2>,
20409 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
20410 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
20413 # Tektronix 4105 from BRL
20414 # The following setup modes are assumed for normal operation:
20415 # CODE ansi CRLF no DABUFFER 141
20416 # DAENABLE yes DALINES 30 DAMODE replace
20417 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
20418 # FLAGGING input INSERTREPLACE replace LFCR no
20419 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
20420 # SELECTCHARSET G1 0 TABS -2
20421 # Other setup modes may be set for operator convenience or communication
20422 # requirements; I recommend
20423 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20424 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20425 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20426 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
20427 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20428 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
20430 # and factory color maps. After setting these modes, save them with NVSAVE. No
20431 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20432 # "IC" cannot be used in combination with "im" & "ei".
20433 # "tek4105a" is just a guess:
20434 tek4105a|Tektronix 4105 (BRL),
20435 OTbs, OTpt, msgr, xon,
20436 OTkn#8, cols#80, it#8, lines#30, vt#3,
20437 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
20438 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
20439 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20440 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20441 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20442 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
20443 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20444 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20445 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
20446 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20447 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20448 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20449 ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20450 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20451 rmso=\E[m, rmul=\E[m,
20452 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20453 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
20454 \E[?7;8h\E[r\E[m\E>,
20455 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20456 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20460 # Tektronix 4106/4107/4109 from BRL
20461 # The following setup modes are assumed for normal operation:
20462 # CODE ansi COLUMNMODE 80 CRLF no
20463 # DABUFFER 141 DAENABLE yes DALINES 32
20464 # DAMODE replace DAVISIBILITY yes ECHO no
20465 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
20466 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
20467 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
20469 # Other setup modes may be set for operator convenience or communication
20470 # requirements; I recommend
20471 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
20472 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
20473 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
20474 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
20475 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
20476 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
20478 # and factory color maps. After setting these modes, save them with NVSAVE. No
20479 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20480 # "IC" cannot be used in combination with "im" & "ei".
20481 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
20483 cols#80, it#8, lines#32, vt#3,
20484 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
20485 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
20486 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20487 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20488 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20489 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
20490 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20491 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20492 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
20493 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
20494 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
20495 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
20496 ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20497 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
20498 rmso=\E[m, rmul=\E[m,
20499 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
20500 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
20501 ;5l\E[?7;8h\E[r\E[m\E>,
20502 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
20503 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
20507 # TEK Programmer's Reference
20508 # Part No. 070-4893-00
20510 # 4107/4109 Computer Display Terminal
20513 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
20514 # 0 selects Tek mode, i.e., \E%!0
20515 # 1 selects ANSI mode
20516 # 2 selects ANSI edit-mode
20517 # 3 selects VT52 mode
20519 # One odd thing about the description (which has been unchanged since the 90s)
20520 # is that the cursor addressing is using VT52 mode, and a few others use the
20521 # VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
20522 # the developer used Emacs, which misuses cvvis (this description sets VT52
20523 # mode in that capability).
20524 tek4107|tek4109|Tektronix terminals 4107 4109,
20525 OTbs, am, mir, msgr, ul, xenl, xt,
20526 cols#79, it#8, lines#29,
20527 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
20528 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
20529 cub1=^H, cud1=\n, cuf1=\EC,
20530 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
20531 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
20532 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20533 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
20534 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
20535 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
20536 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
20537 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
20538 smul=\E%!1\E[4m$<2>\E%!0,
20539 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
20540 # see the note attached to tek4207.
20541 tek4207-s|Tektronix 4207 with sysline but no memory,
20543 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
20544 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20545 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20546 is2=\E7\E[?6l\E[2K\E[?6h\E8,
20547 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
20549 # The 4110 series may be a wonderful graphics series, but they make the 4025
20550 # look good for screen editing. In the dialog area, you can't move the cursor
20551 # off the bottom line. Out of the dialog area, ^K moves it up, but there
20552 # is no way to scroll.
20554 # Note that there is a floppy for free from Tek that makes the
20555 # 4112 emulate the VT52 (use the VT52 termcap). There is also
20556 # an expected enhancement that will use ANSI standard sequences.
20558 # 4112 in non-dialog area pretending to scroll. It really wraps
20559 # but vi is said to work (more or less) in this mode.
20561 # 'vi' works reasonably well with this entry.
20563 otek4112|o4112-nd|otek4113|otek4114|Tektronix 4110 series (old),
20566 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
20567 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
20568 # The 4112 with the ANSI compatibility enhancement
20569 tek4112|tek4114|Tektronix 4110 series,
20572 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
20573 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
20574 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
20575 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
20576 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20577 tek4112-nd|Tektronix 4112 not in dialog area,
20579 cuu1=^K, use=tek4112,
20580 tek4112-5|Tektronix 4112 in 5 line dialog area,
20581 lines#5, use=tek4112,
20582 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
20583 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
20584 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
20585 # previously \0410 and \0411 sequences...I don't *think* they were supposed
20586 # to be 4-digit octal -- esr)
20587 tek4113|Tektronix 4113 color graphics with 5 line dialog area,
20590 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
20591 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20593 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
20594 tek4113-34|Tektronix 4113 color graphics with 34 line dialog area,
20596 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
20597 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
20598 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
20599 # :vb: needs enough delay to let you see the background color being toggled.
20600 tek4113-nd|Tektronix 4113 color graphics with no dialog area,
20602 cols#80, it#8, lines#34,
20603 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
20605 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
20607 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
20608 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
20609 # This entry is from Tek. Inc. (Brian Biehl)
20610 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
20611 otek4115|Tektronix 4115 (old),
20612 OTbs, am, da, db, eo,
20613 cols#80, it#8, lines#34,
20614 cbt=\E[Z, clear=\E[H\E[2J,
20615 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
20616 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20617 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
20618 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
20620 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
20621 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
20622 kbs=^H, ri=\EM, rmam=\E[?7l,
20623 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
20624 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
20625 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
20627 tek4115|Tektronix 4115 entry with more ANSI capabilities (new),
20630 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
20631 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
20632 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20633 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
20634 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
20635 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
20636 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
20637 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m,
20638 rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
20639 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
20641 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20642 vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
20643 # The tek4125 emulates a VT100 incorrectly - the scrolling region
20644 # command is ignored. The following entry replaces <csr> with the needed
20645 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
20646 # chokes on; and adds a lot of initialization for the Tektronix dialog area.
20647 # Note that this entry uses all 34 lines and sets the cursor color to green.
20648 # Steve Jacobson 8/85
20649 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
20650 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
20651 tek4125|Tektronix 4125,
20653 csr@, dl1=\E[1M, il1=\E[1L,
20654 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
20655 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
20657 rc@, sc@, smkx=\E=, use=vt100+4bsd,
20659 # From: <jcoker@ucbic>
20660 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
20661 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
20662 # note that if jcoker wasn't confused you may be able to use this one.
20663 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
20664 tek4207|Tektronix 4207 graphics terminal with memory,
20665 am, bw, mir, msgr, ul, xenl,
20666 cols#80, it#8, lines#32,
20667 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
20668 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20669 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
20670 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
20671 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
20672 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
20673 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
20674 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
20675 rev=\E[7m, ri=\E[T,
20676 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
20677 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
20678 smul=\E[4m, tbc=\E[1g,
20680 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
20681 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
20682 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
20683 tek4404|Tektronix 4404,
20685 cols#80, it#8, lines#32,
20686 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
20687 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20688 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
20689 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
20690 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
20691 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
20692 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20693 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
20694 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
20695 # Some unknown person wrote:
20696 # I added the is string - straight Unix has ESC ; in the login
20697 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
20698 # mode). The is string here cleans up a few things (but not
20700 ct8500|Tektronix ct8500,
20703 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
20704 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
20705 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
20706 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
20707 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
20709 # Tektronix 4205 terminal.
20711 # am is not defined because the wrap around occurs not when the char.
20712 # is placed in the 80'th column, but when we are attempting to type
20713 # the 81'st character on the line. (esr: hmm, this is like the VT100
20714 # version of xenl, perhaps am + xenl would work!)
20716 # Bold, dim, and standout are simulated by colors and thus not allowed
20717 # with colors. The Tektronix color table is mapped into the RGB color
20718 # table by setf/setb. All colors are reset to factory specifications by oc.
20719 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
20720 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
20721 # interval then maps into pre-defined value.
20722 tek4205|Tektronix 4205,
20724 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
20725 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20726 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
20727 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
20728 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20729 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20730 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
20731 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
20732 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
20734 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
20735 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
20736 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
20737 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
20738 1%e%p2%{875}%<%tE:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
20739 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
20740 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE:%eF4%;%?%p4%{125}%<
20741 %t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8
20742 %e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE:%eF
20744 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
20745 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
20746 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
20748 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
20750 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
20751 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
20752 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20753 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20755 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
20756 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
20758 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
20759 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
20760 smul=\E[4m, tbc=\E[1g,
20762 #### Teletype (tty)
20764 # These are the hardcopy Teletypes from before AT&T bought the company,
20765 # clattering electromechanical dinosaurs in Bakelite cases that printed on
20766 # pulpy yellow roll paper. If you remember these you go back a ways.
20767 # Teletype-branded VDTs are listed in the AT&T section.
20769 # The earliest UNIXes were designed to use these clunkers; nroff and a few
20770 # other programs still default to emitting codes for the Model 37.
20773 tty33|tty35|model 33 or 35 teletype,
20776 bel=^G, cr=\r, cud1=\n, ind=\n,
20777 tty37|model 37 teletype,
20779 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
20782 # There are known to be at least three flavors of the tty40, all seem more
20783 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
20784 # awful braindamage, such as printing a visible newline indicator after each
20785 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
20786 # braindamaged but has hope and is described here. The 40-4 is a 3270
20787 # lookalike and beyond hope. The terminal has visible bell but I don't know
20788 # it - it's null here to prevent it from showing the BL character.
20789 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
20790 # a "newline" style terminal (-crmode) vi figures all it needs is nl
20791 # to get crlf, even if <cr> is not ^M.)
20792 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
20793 tty40|ds40|ds40-2|dataspeed40|Teletype dataspeed 40/2,
20796 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
20797 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
20798 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
20799 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
20800 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
20801 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
20802 tty43|model 43 teletype,
20803 OTbs, am, hc, os, xon,
20805 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20810 # You can add <is2=\E<> to put this 40-column mode, though I can't
20811 # for the life of me think why anyone would want to.
20812 scanset|sc410|sc415|Tymshare Scan Set,
20815 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
20816 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20817 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
20818 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
20819 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
20821 #### Volker-Craig (vc)
20823 # If you saw a Byte Magazine cover with a terminal on it during the early
20824 # 1980s, it was probably one of these. Carl Helmers liked them because
20825 # they could crank 19.2 and were cheap (that is, he liked them until he tried
20826 # to program one...)
20829 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
20830 # every other linefeed.
20831 vc303|vc103|vc203|Volker-Craig 303,
20834 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20835 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
20836 kcuu1=^N, ll=\017$<1>W,
20837 vc303a|vc403a|Volker-Craig 303a,
20838 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
20839 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
20840 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
20841 vc404|Volker-Craig 404,
20844 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20845 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20846 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
20847 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
20848 vc404-s|Volker-Craig 404 w/standout mode,
20849 cud1=\n, rmso=^O, smso=^N, use=vc404,
20850 # From: <wolfgang@cs.sfu.ca>
20851 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
20852 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
20855 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
20856 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
20857 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
20858 ich1=\E:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
20859 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
20860 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
20861 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
20862 rmso=\E^_, smso=\E^Y,
20863 vc415|Volker-Craig 415,
20864 clear=^L, use=vc404,
20866 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
20869 #### IBM PC and clones
20872 # The pcplot IBM-PC terminal emulation program is really messed up. It is
20873 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
20874 # doesn't support scrolling regions, ignores add line commands, and ignores
20875 # delete line commands. Consequently, the resulting behavior looks like a
20876 # crude adm3a-type terminal.
20877 # Steve Jacobson 8/85
20878 pcplot|pc-plot terminal emulation program,
20880 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
20881 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
20882 # I've found that my KayPro II, running MDM730, continues to emulate an
20883 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
20884 # system the following termcap entry works well:
20885 # I have noticed a couple of minor glitches, but nothing I can't work
20886 # around. (I added two capabilities from the BRL entry -- esr)
20887 kaypro|kaypro2|kaypro II,
20890 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
20891 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
20892 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
20894 # From IBM, Thu May 5 19:35:27 1983
20895 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
20896 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
20899 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
20900 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
20902 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
20903 OTbs, am, bw, eo, hs, km, msgr, ul,
20904 cols#80, it#8, lines#24,
20905 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
20907 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
20908 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
20909 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20910 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20911 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
20912 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
20913 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20914 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
20915 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
20916 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
20917 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
20918 rmso=\E[m, rmul=\E[m,
20919 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20921 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
20925 # Apple II firmware console first, then various 80-column cards and
20926 # terminal emulators. For two cents I'd toss all these in the UFO file
20927 # along with the 40-column apple entries.
20930 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
20931 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
20932 # function of TIC, not the firmware.
20933 # The clear key on a IIgs will do something like clear-screen,
20934 # depending on what you're in.
20935 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
20936 OTbs, am, bw, eo, msgr,
20937 cols#80, it#8, lines#24,
20938 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
20939 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20940 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
20941 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
20943 # Apple //e with 80-column card, entry from BRL
20944 # The modem interface is permitted to discard LF (maybe DC1), otherwise
20945 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
20946 # Auto-wrap does not work right due to newline scrolling delay, which also
20947 # requires that you set "stty cr2".
20948 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
20949 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
20950 # using a terminal emulation program instead of the built-in firmware.
20954 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
20955 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
20956 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
20957 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20959 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
20960 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
20961 apple2e-p|Apple //e via Pascal,
20962 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
20963 kcud1=\n, use=apple2e,
20964 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
20965 # Enable DC3/DC1 flow control with "stty ixon -ixany".
20966 apple-ae|ASCII Express,
20967 OTbs, am, bw, msgr, nxon, xon,
20968 cols#80, it#8, lines#24,
20969 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20970 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
20971 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
20972 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
20974 appleII|Apple II plus,
20976 cols#80, it#8, lines#24,
20977 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
20978 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
20979 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
20980 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
20981 # Originally by Gary Ford 21NOV83
20982 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
20983 apple-80|Apple II with smarterm 80 col,
20986 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
20987 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
20988 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
20989 apple-soroc|Apple emulating Soroc 120,
20992 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20993 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
20994 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
20995 # From Peter Harrison, Computer Graphics Lab, San Francisco
20996 # ucbvax!ucsfmis!harrison .....uucp
20997 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
20998 # "These two work. If you don't have the inverse video chip for the
20999 # Apple with videx then remove the :so: and :se: fields."
21000 # (apple-videx: this used to be called DaleApple -- esr)
21001 apple-videx|Apple with videx videoterm 80 column board with inverse video,
21003 cols#80, it#8, lines#24,
21004 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
21005 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
21006 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
21007 rmso=^Z2, sgr0=^Z2, smso=^Z3,
21008 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
21009 # Apple Cat ][ 212 modem, + more all
21010 # controlled by ASCII Express: Pro.
21011 # From Dave Shaver <isucs1!shaver>
21012 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
21015 acsc=, clear=^L, cuf1=^\,
21016 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
21017 flash=^W35^W06, home=^Y,
21018 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
21020 apple-uterm|Ultraterm for Apple micros,
21023 acsc=, clear=^L, cuf1=^\,
21024 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
21025 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
21026 # from trwrba!bwong (Bradley W. Wong):
21028 # This entry assumes that you are using an apple with the UCSD Pascal
21029 # language card. SYSTEM.MISCINFO is assumed to be the same as that
21030 # supplied with the standard apple except that screenwidth should be set
21031 # using SETUP to 80 columns. Note that the right arrow is not mapped in
21032 # this termcap entry. This is because that key, on the Apple, transmits
21033 # a ^U and would thus preempt the more useful "up" function of vi.
21036 apple80p|80-column apple with Pascal card,
21039 clear=^Y^L, cuf1=^\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
21040 cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H,
21042 # Apple II+ equipped with Videx 80 column card
21044 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
21045 # manually converted by D A Gwyn
21047 # DO NOT use any terminal emulation with this data base, it works directly
21048 # with the Videx card. This has been tested with vi 1200 baud and works fine.
21050 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
21051 # 1 screen, while in R2 ^U doesn't.
21052 # For inverse alternate character set add:
21053 # <smacs>=^O:<rmacs>=^N:
21054 # (apple-v: added it#8 -- esr)
21055 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
21057 cols#80, it#8, lines#24,
21058 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
21059 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
21060 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
21061 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
21062 khome=^Y, rmso=^Z2, smso=^Z3,
21063 apple-videx3|vapple|Apple II with 80 col card,
21066 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
21067 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
21068 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21069 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
21070 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
21071 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
21072 aepro|Apple II+ running ASCII Express Pro--vt52,
21075 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
21076 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21078 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
21079 apple-vm80|ap-vm80|Apple with viewmax-80,
21082 clear=\014$<300/>, cuf1=^\:,
21083 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
21084 ed=\013$<300/>, el=^], home=\031$<200/>,
21086 #### Apple Lisa & Macintosh
21089 # (lisa: changed <cvvis> to <cnorm> -- esr)
21090 lisa|Apple Lisa console display (black on white),
21091 OTbs, am, eo, msgr,
21092 cols#88, it#8, lines#32,
21093 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
21094 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
21095 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
21096 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
21097 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21098 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
21099 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
21100 liswb|Apple Lisa console display (white on black),
21101 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
21102 smso=\E[m, smul=\E[4m, use=lisa,
21104 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
21105 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
21107 # These entries assume that the 'Auto Wraparound' is enabled.
21108 # Xon-Xoff flow control should also be enabled.
21110 # The VT100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
21111 # settings are in non-volatile memory and don't need to be reset upon login.
21112 # Also setting the number of columns glitches the screen annoyingly.
21113 # You can type "reset" to get them set.
21115 lisaterm|Apple Lisa or Lisa/2 running LisaTerm VT100 emulation,
21116 OTbs, OTpt, am, xenl, xon,
21117 OTkn#4, cols#80, it#8, lines#24, vt#3,
21118 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
21119 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21120 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21121 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
21122 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
21123 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
21124 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
21125 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21126 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
21127 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
21129 # Lisaterm in 132 column ("wide") mode.
21130 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
21132 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
21133 # Although MacTerminal has insert/delete line, it is commented out here
21134 # since it is much faster and cleaner to use the "lock scrolling region"
21135 # method of inserting and deleting lines due to the MacTerminal implementation.
21136 # Also, the "Insert/delete ch" strings have an extra character appended to them
21137 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
21138 # supported by MacTerminal.
21139 mac|macintosh|Macintosh with MacTerminal,
21142 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
21143 # Lisaterm in 132 column ("wide") mode.
21144 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
21147 #### Radio Shack/Tandy
21150 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
21151 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
21152 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
21153 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
21155 cols#80, it#8, lines#24,
21156 bel=^G, blink=^_", bold=\E:^A, civis=^E\s,
21157 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
21158 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
21159 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
21160 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
21161 sgr0=\037!\E:\0, smso=^_\s, smul=^_",
21162 # (trs2: removed obsolete ":nl=^_:" -- esr)
21163 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
21165 cols#80, it#8, lines#24,
21166 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
21167 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
21168 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
21169 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
21170 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
21171 # (This had extension capabilities
21172 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
21173 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
21174 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
21175 trs16|trs-80 model 16 console,
21177 cols#80, it#8, lines#24,
21178 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
21179 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21180 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21181 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
21182 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21183 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
21184 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
21185 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
21186 smacs=\ERG, smso=\ERD,
21188 #### Commodore Business Machines
21190 # Formerly located in West Chester, PA; went spectacularly bust in 1994
21191 # after years of shaky engineering and egregious mismanagement. Made one
21192 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
21193 # C-128, VIC-20). The C-64 is said to have been the most popular machine
21194 # ever (most units sold); they can still be found gathering dust in closets
21198 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
21199 # Added a few more entries, converted caret-type control sequence (^x) entries
21200 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
21201 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
21203 # :as:, :ae: Support for alternate character sets.
21204 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
21205 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
21206 # This one appears to fix a problem I always had with a line ending
21207 # at 'width+1' (I think) followed by a blank line in vi. The blank
21208 # line tended to disappear and reappear depending on how the screen
21209 # was refreshed. Note that this is probably needed only if you use
21210 # something like a Dnet Fterm with the window sized to some peculiar
21211 # dimension larger than 80 columns.
21212 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
21213 # (amiga: removed obsolete :kn#10:,
21214 # also added empty <acsc> to suppress a warning --esr)
21216 OTbs, am, bw, xenl,
21218 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
21219 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
21220 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21221 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21222 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21223 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
21224 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
21225 invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21226 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
21227 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
21228 kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O,
21229 rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
21230 smso=\E[7m, smul=\E[4m, use=ecma+index,
21232 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
21233 # (amiga: added empty <acsc> to suppress a warning.
21234 # I'm told this entry screws up badly with AS225, the Amiga
21235 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
21236 amiga-h|Hans Verkuil's Amiga ANSI,
21239 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
21240 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
21241 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
21242 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
21243 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
21244 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
21245 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
21246 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
21247 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
21248 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
21249 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
21250 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
21251 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
21252 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
21253 smso=\2337m, smul=\2334m,
21255 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
21257 # Pavel Fedin added
21262 amiga-8bit|Amiga ANSI using 8-bit controls,
21263 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
21264 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
21265 kpp=\233T, ri=\215, rin@, use=amiga-h,
21267 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
21268 # requires use of appropriate preferences settings.
21269 amiga-vnc|Amiga using VNC console (black on light gray),
21270 am, da, db, msgr, ndscr,
21271 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
21272 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
21273 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
21274 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
21275 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21276 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21277 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21278 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
21279 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
21281 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
21282 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21283 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
21284 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
21285 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
21286 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
21287 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
21288 rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
21289 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
21290 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
21291 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
21292 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
21293 smso=\E[1m, smul=\E[4m, use=ecma+index,
21295 # MorphOS on Genesi Pegasos
21296 # By Pavel Fedin <sonic_amiga@rambler.ru>
21297 morphos|MorphOS on Genesi Pegasos,
21298 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
21299 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
21300 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
21301 ri=\215, rin@, use=amiga-h,
21303 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
21304 # I'm trying to write a termcap for a commodore b-128, and I'm
21305 # having a little trouble. I've had to map most of my control characters
21306 # to something that unix will accept (my delete-char is a ctrl-t, etc),
21307 # and create some functions (like cm), but thats life.
21308 # The problem is with the arrow keys - right, and up work fine, but
21309 # left deletes the previous character and down I just can't figure out.
21310 # Jove knows what I want, but I don't know what it's sending to me (it
21311 # isn't thats bound to next-line in jove).
21312 # Anybody got any ideas? Here's my termcap.
21313 # DAG -- I changed his "^n" entries to "\n"; see if that works.
21315 commodore|b-128|Commodore B-128 micro,
21317 OTdN#20, cols#80, lines#24, pb#150,
21318 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
21319 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
21320 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
21321 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
21322 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
21327 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
21328 northstar|North Star Advantage,
21332 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
21333 el=\016$<200/>, home=\034\032$<200/>,
21337 # Thu Jul 7 03:55:16 1983
21339 # As an aside, be careful; it may sound like an anomaly on the
21340 # Osborne, but with the 80-column upgrade, it's too easy to
21341 # enter lines >80 columns!
21343 # I've already had several comments...
21344 # The Osborne-1 with the 80-col option is capable of being
21345 # 52, 80, or 104 characters wide; default to 80 for compatibility
21346 # with most systems.
21348 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
21349 osborne-w|osborne1-w|Osborne I in 104-column mode,
21351 cols#104, lines#24,
21352 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21353 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21354 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
21355 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
21356 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
21357 osborne|osborne1|Osborne I in 80-column mode,
21358 OTbs, am, mir, msgr, ul, xhp,
21359 OTdB#4, cols#80, lines#24,
21360 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
21361 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
21362 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
21363 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
21364 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
21366 # Osborne Executive definition from BRL
21367 # Similar to tvi920
21368 # Added by David Milligan and Tom Smith (SMU)
21369 osexec|Osborne executive,
21371 OTug#1, cols#80, lines#24, xmc#1,
21372 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21373 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21374 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
21375 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
21376 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
21377 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
21378 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
21381 #### Console types for obsolete UNIX clones
21383 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
21384 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
21385 # were commercial, Minix an educational tool sold in conjunction with a book.
21386 # Memory-segmentation limits and a strong tendency to look like V7 long after
21387 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
21388 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
21389 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
21390 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
21391 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
21392 # even as single processes under SunOS and the Macintosh OS.
21396 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
21397 minix|minix console (v3),
21399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
21400 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
21401 \301w\302x\263y\363z\362{\343|\330}\234~\376,
21402 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
21403 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
21404 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
21405 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
21406 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
21407 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
21408 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
21409 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
21410 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
21411 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
21412 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
21413 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
21414 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
21417 minix-3.0|minix console (v3.0),
21418 use=ecma+color, use=minix-1.7,
21421 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
21422 # This matches the entry provided with minix 1.7.4, with bogus :ri: removed.
21423 minix-1.7|minix console (v1.7),
21425 el1=\E[2K, is2=\E[0m, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
21426 lf4=Num -, lf5=Num 5, use=minix-1.5,
21427 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
21428 minix-old|minix-1.5|minix console (v1.5),
21430 cols#80, it#8, lines#25,
21431 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
21432 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21433 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21434 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21435 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
21436 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
21437 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
21438 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
21439 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
21440 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
21441 # The linewrap option can be specified by editing /usr/include/minix/config.h
21442 # before recompiling the minix 1.5 kernel.
21443 minix-old-am|minix console with linewrap,
21446 pc-minix|minix console on an Intel box,
21447 use=klone+acs, use=minix-3.0,
21449 # According to the Coherent 2.3 manual, the PC console is similar
21450 # to a z19. The differences seem to be (1) 25 lines, (2) no status
21451 # line, (3) standout is broken, (4) ins/del line is broken, (5)
21452 # has blinking and bold.
21453 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
21455 cols#80, it#8, lines#25,
21456 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21457 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
21458 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
21459 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
21460 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
21462 # According to the Venix 1.1 manual, the PC console is similar
21463 # to a DEC VT52. Differences seem to be (1) arrow keys send
21464 # different strings, (2) enhanced standout, (3) added insert/delete line.
21465 # Note in particular that it doesn't have automatic margins.
21466 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
21467 # not described here because this derives from an old termcap entry.
21468 pc-venix|venix|IBM PC console running Venix,
21469 cols#80, it#8, lines#25,
21470 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21471 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21472 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
21473 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
21475 #### Miscellaneous microcomputer consoles
21477 # If you know anything more about any of these, please tell me.
21480 # The MAI Basic Four computer was obsolete at the end of the 1980s.
21481 # It may be used as a terminal by putting it in "line" mode as seen on
21482 # one of the status lines.
21483 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
21484 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
21485 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
21486 # used \ED instead.
21487 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
21488 mai|basic4|MAI Basic Four in ANSI mode,
21489 am, da, db, mir, msgr,
21490 cols#82, it#8, lines#25,
21491 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
21492 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
21493 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
21494 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
21495 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
21496 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
21497 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21498 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21499 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
21500 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
21501 smir=\E[4h, smso=\E[7m, smul=\E[4m,
21502 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
21503 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
21505 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
21506 # The Basis 108 was a Apple II clone, manufactured by the "Basis
21507 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
21508 # about 1,5 km from where I live, but doesn't build own computers any
21509 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
21510 # equipped with one or two 5.25" disk drives, had a monochrome and colour
21511 # video output for a TV set or a dedicated monitor and several slots for
21512 # Apple II cards. Basis 108 were quite popular at german schools before
21513 # the advent of the IBM PC. They run, for example, the UCSD Pascal
21514 # development system (which I used even in 1993 to program the steering
21515 # and data recording for our school's experimental solar panel :), Apple DOS
21517 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
21518 basis|BASIS108 computer with terminal translation table active,
21519 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
21520 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
21521 smso=\E(, use=adm3a,
21522 # luna's BMC terminal emulator
21523 luna|luna68k|LUNA68K Bitmap console,
21524 cols#88, lines#46, use=ansi-mini,
21525 megatek|pegasus workstation terminal emulator,
21528 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
21529 # interface (pre-Macintosh by several years) that went nowhere.
21530 xerox820|x820|Xerox 820,
21533 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21534 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
21537 #### Videotex and teletext
21540 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
21541 # \E[?3l 80 columns
21542 # \E[?4l scrolling on
21543 # \E[12h local echo off
21544 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
21545 # \E)0 G1 DEC set (line graphics)
21547 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
21548 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
21549 OTbs, eslok, hs, xenl,
21550 cols#80, it#8, lines#24, wsl#72, xmc#0,
21551 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
21552 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
21553 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
21554 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
21555 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21556 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21557 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
21558 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
21559 is1=\E:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
21560 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
21561 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
21562 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21563 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
21564 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
21565 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
21566 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
21567 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
21568 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
21571 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
21573 minitel1|minitel 1,
21574 am, bw, eslok, hs, hz, .msgr, G0,
21575 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
21576 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
21577 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21578 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
21579 dsl=\037@A\030\n, el=^X,
21580 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
21581 home=^^, ind=\n, is2=\E;`ZQ\E:iC\E:iE\021, kbs=^SG,
21582 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
21583 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
21584 rev=\E], ri=^K, rmso=\E\\,
21585 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21586 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
21587 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
21589 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
21590 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
21591 %tC%e%p1%'@'%+%c%;,
21592 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
21593 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
21594 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
21595 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
21596 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
21597 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
21599 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
21600 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
21601 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
21602 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
21603 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
21604 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
21605 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
21606 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
21607 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
21608 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
21609 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
21610 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
21611 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
21613 minitel1b|minitel 1-bistandard (in 40cols mode),
21615 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
21616 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
21617 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
21618 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
21619 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
21620 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
21621 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
21622 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
21623 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
21624 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
21625 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
21626 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
21627 rmir=\E[4l, smir=\E[4h,
21628 u8=\001%[ABCPtuvwxyz0123456789:;<=>?]\004,
21629 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
21630 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E:|k, .rmkx=\E;jYA,
21631 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
21633 # rmkx posait des problemes (logout en sortant de vi).
21634 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
21635 am@, bw@, eslok@, hz@, msgr, G0,
21636 colors@, cols#80, it#8, pairs@,
21637 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
21638 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
21639 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21640 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
21641 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
21642 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
21643 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
21644 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
21645 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
21646 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
21647 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
21649 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
21650 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
21651 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
21652 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
21654 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
21655 smso=\E[7m, smul=\E[4m,
21656 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
21657 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
21658 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
21659 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
21661 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
21662 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
21663 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
21665 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
21667 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
21668 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
21669 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
21670 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
21671 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
21672 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
21673 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
21674 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
21675 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
21676 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
21679 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
21681 bold=\EG, clear=^L\EB,
21682 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
21683 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
21684 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21685 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
21688 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
21691 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
21692 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
21693 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
21694 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
21695 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
21697 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
21698 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
21699 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
21700 .u8=\001Cu|\004r, use=minitel1b,
21704 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
21706 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
21707 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
21708 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
21710 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
21711 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
21712 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
21713 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
21715 # Fonctionne par exemple avec Midnight Commander (mc).
21717 minitel2-80|minitel 2 (80cols) avec filets VT100 (DEC),
21719 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
21720 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
21721 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
21723 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21724 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
21725 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
21726 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
21727 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
21728 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
21729 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
21730 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
21731 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
21732 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
21733 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
21734 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
21735 \,+k\,.l\,0\177\,-j,
21738 minitel12-80|minitel 12 (80cols),
21740 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
21742 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
21744 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
21746 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
21747 E0=^O, S0=\E)3\016,
21748 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
21749 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
21750 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
21751 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
21752 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
21753 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
21754 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
21755 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
21756 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
21757 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
21758 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
21759 \,\\\,m\,+k\,.l\,0\177\,-j,
21763 # Add these in your ~/.screenrc for inputting some special glyphs like french
21764 # accentuated chars in 40 cols mode:
21766 # bindkey ^YA digraph '`' # Saisi accent grave.
21767 # bindkey ^YB digraph "'" # Saisi accent aigu.
21768 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
21769 # bindkey ^YH digraph '"' # Saisi accent trema.
21771 # bindkey ^Y# stuff \243 # Livre.
21772 # bindkey "^Y\047" stuff \247 # Paragraphe.
21773 # bindkey ^Yj stuff \306 # AE
21774 # bindkey ^Yz stuff \346 # ae
21775 # bindkey ^YKc stuff \347 # c cedille.
21778 screen.minitel1|Screen specific for minitel1,
21780 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
21782 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
21783 rmul@, smul@, u8=\E[?1;2c, use=decid+cpr,
21784 use=xterm+x11mouse, use=screen,
21786 screen.minitel1b|Screen specific for minitel1b,
21787 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
21788 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
21789 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
21790 use=screen.minitel1,
21792 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
21793 colors@, ncv@, pairs@,
21794 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
21795 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
21796 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
21797 use=screen.minitel1b,
21799 screen.minitel1-nb|Screen specific for minitel1-nb,
21800 colors@, ncv@, pairs@,
21801 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21802 use=screen.minitel1,
21804 screen.minitel1b-nb|Screen specific for minitel1b-nb,
21805 colors@, ncv@, pairs@,
21806 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
21807 use=screen.minitel1b,
21809 # From: Alexandre Montaron, 29 Sep 2016
21811 linux-m1|Linux Minitel 1 "like" Couleurs,
21812 am, bw@, ccc, mir, msgr, xenl,
21813 colors#8, it#8, ncv#16, pairs#64,
21814 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
21815 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
21816 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
21817 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21818 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
21819 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21820 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
21821 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
21822 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
21823 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
21825 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
21826 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
21827 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E\E[A, kent=\EOM,
21828 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
21829 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
21830 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B,
21831 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~,
21832 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kil1=\E\E[B,
21833 kmous=\E[M, nel=\EE, oc=\E]R\E]P3FFFF80, op=\E[39;49m,
21834 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
21835 rmpch=\E[10m, rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8],
21836 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21837 smacs=^N, smam=\E[?7h, smir=\E[4h, smpch=\E[11m,
21838 smso=\E[7m, tbc=\E[3g, vpa=\E[%i%p1%dd, .VN=\E[?5l,
21839 .VR=\E[?5h, .am@, .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H,
21840 .rmcup=, .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
21842 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21843 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21844 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21845 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21846 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21847 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21848 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21849 \n\n\n\n\n\n\n\n\n\n,
21850 use=vt220+pcedit, use=vt220+cvis, use=linux+decid,
21852 # 1. Using double-shapes for VT100 graphical chars (eg: mc).
21853 # 2. Native brown color corrected to good yellow color.
21854 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
21855 # 4. Suppressed nonexistent underlined mode (normally as bright).
21856 # 5. ich/ich1 not filled because of non-curses programs.
21858 # 6. Suppressed nonexistent invisible mode.
21859 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
21861 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
21863 colors@, ncv@, pairs@,
21864 acsc@, bold=\E[33m, enacs@, initc@,
21865 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
21866 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
21867 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21868 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
21869 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
21870 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
21871 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
21874 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
21876 colors@, ncv@, pairs@,
21877 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21878 uvvwwxxyyzz{{||}}~~,
21879 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
21880 enacs=\E)0, initc@,
21881 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
21882 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
21883 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
21885 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
21887 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
21888 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
21889 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
21890 \E]PFFFFFFF\E[;37m,
21893 # From: Alexandre Montaron, 27 May 2020
21894 linux-s|Linux console with added status line at bottom,
21896 clear=\E[255;255H\E[A\E[1J\E[H, csr@,
21897 dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
21898 iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s;
21899 \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1
21900 \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE
21901 S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"',
21902 rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux,
21904 # Screen entries counterpart :
21906 screen.linux-m1|Linux m1 specific for screen,
21908 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
21909 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
21910 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
21911 smul@, u8=\E[?1;2c,
21912 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21913 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21914 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21915 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21916 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21917 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21918 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
21919 \n\n\n\n\n\n\n\n\n\n,
21920 use=decid+cpr, use=xterm+x11mouse, use=screen,
21922 screen.linux-m1b|Linux m1b specific for screen,
21924 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
21926 screen.linux-m2|Linux m2 specific for screen,
21927 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21928 uvvwwxxyyzz{{||}}~~,
21929 use=screen.linux-m1b,
21933 putty-m1|Putty Minitel 1 "like" Couleurs,
21935 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21936 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21937 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21938 use=ecma+index, use=linux-m1,
21940 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
21942 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21943 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21944 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21945 use=ecma+index, use=linux-m1b,
21947 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
21949 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
21951 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
21952 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S,
21953 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm,
21954 use=ecma+index, use=linux-m2,
21956 putty+screen|PuTTY with screen resizing extensions (building-block),
21957 .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
21959 putty-screen|PuTTY with screen resizing extensions,
21960 WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty,
21962 screen.putty-m1|Putty m1 specific for screen,
21963 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
21965 screen.putty-m1b|Putty m1b specific for screen,
21967 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
21969 screen.putty-m2|Putty m2 specific for screen,
21970 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
21971 uvvwwxxyyzz{{||}}~~,
21972 use=screen.putty-m1b,
21973 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
21976 # viewdata lacks a true cup capability,
21977 # so I achieved it with home and cud1/cuf1 sequences only !
21978 viewdata|Prestel/Viewdata terminals,
21981 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
21983 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
21984 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
21985 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
21986 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
21987 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
21988 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
21989 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
21991 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
21992 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
21994 viewdata-o|optimized version of Viewdata Prestel/Viewdata terminals,
21995 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
21996 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
21997 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
21998 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
21999 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
22000 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
22001 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
22002 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
22003 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
22004 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
22005 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
22006 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
22007 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
22008 .ll=^^^K, use=viewdata,
22010 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
22012 viewdata-rv|Prestel/Viewdata terminals with reverse capabilitie (as green),
22014 rmso=\EG, smso=\EB, use=viewdata-o,
22016 ######## OBSOLETE VDT TYPES
22018 # These terminals are *long* dead -- these entries are retained for
22019 # historical interest only.
22021 #### Amtek Business Machines
22024 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
22025 # but these caps were commented out in 8.3; also, removed overridden
22026 # ":do=^J:" -- esr)
22027 abm80|amtek business machines 80,
22030 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
22031 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
22032 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
22034 #### Bell Labs blit terminals
22036 # These were AT&T's official entries. The 5620 FAQ maintained by
22037 # David Breneman <daveb@dgtl.com> has this to say:
22039 # Actually, in the beginning was the Jerq, and the Jerq was white with a
22040 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
22041 # was good. But lo, upon the horizon loomed a mighty management-type person
22042 # (known now only by the initials VP) who said, the mighty Jerq must stay
22043 # alone, and could not go forth into the world. So Locanthi and Pike put the
22044 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
22045 # world. And the Jerq lived the rest of its days in research, but never
22046 # strayed from those paths.
22048 # In all seriousness, the Blit was originally known as the Jerq, but when
22049 # it started to be shown outside of the halls of the Bell Labs Research
22050 # organization, the management powers that be decided that the name could
22051 # not remain. So it was renamed to be Blit. This was in late 1981.
22053 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
22057 blit|jerq|blit running teletype rom,
22059 cols#87, it#8, lines#72,
22060 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
22061 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
22062 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
22063 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
22064 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
22065 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
22067 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
22068 cbblit|fixterm|blit running columbus code,
22070 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
22071 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
22072 smul=\EU", use=blit,
22074 oblit|ojerq|first version of blit rom,
22075 am, da, db, eo, mir, ul, xon,
22076 cols#88, it#8, lines#72,
22077 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
22078 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
22079 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
22080 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
22083 #### Bolt, Beranek & Newman (bbn)
22085 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
22086 # The parent company, best known as the architects of the Internet, is
22089 # Jeff DelPapa <dp@world.std.com> writes:
22090 # The bitgraph was a large white box that contained a monochrome bitmap
22091 # display, and a 68000 to run it. You could download code and run it on
22092 # the cpu, it had 128kb (I think) of memory. I used one in the late
22093 # 70's, sure beat a VT100. It had one strange feature tho -- it used
22094 # the cpu to bitblt pixels to scroll, it took longer than the refresh
22095 # rate, and looked like a rubber sheet stretching, then snapping
22096 # upwards. It had everything the early mac had, except a floppy drive a
22097 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
22098 # Beranek and Neuman) sold at most a few hundred of them to the real
22099 # world. DOD may have bought more...
22102 # Entries for the BitGraph terminals. The problem
22103 # with scrolling in vi can only be fixed by getting BBN to put
22104 # smarter scroll logic in the terminal or changing vi or padding
22105 # scrolls with about 500 ms delay.
22107 # I always thought the problem was related to the terminal
22108 # counting newlines in its input buffer before scrolling and
22109 # then moving the screen that much. Then vi comes along and
22110 # paints lines in on the bottom line of the screen, so you get
22111 # this big white gap.
22113 bitgraph|bg2.0nv|bg3.10nv|BBN BitGraph 2.0 or later (normal video),
22114 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
22116 bg2.0rv|bg3.10rv|BBn BitGraph 2.0 (reverse video),
22117 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
22119 bg2.0|bg3.10|BBN BitGraph 2.0 or later (no init),
22122 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
22123 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
22124 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
22125 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
22126 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
22127 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
22128 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
22129 sgr0=\E[m, smkx=\E=, smso=\E[7m,
22131 bg1.25rv|BBN BitGraph 1.25 (reverse video),
22132 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
22134 bg1.25nv|BBN BitGraph 1.25 (normal video),
22135 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
22137 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
22138 bg1.25|BBN BitGraph 1.25,
22140 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
22141 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
22142 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
22143 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
22144 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
22145 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
22146 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
22149 #### Bull (bq, dku, vip)
22151 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
22153 #============================================#
22154 # BULL QUESTAR 210 `SDP' terminals emulation #
22155 #============================================#
22157 # Description written by R.K.Saunders (Bull Transac)
22159 # Modifications written by F. Girard (Bull MTS)
22160 # 19-05-87 V02.00.01
22161 # 17-12-87 V02.00.02
22162 # 15-09-89 V02.00.05
22164 # Typical technical selections F1 (modes SDP/ROLL):
22165 # -------------------------------------------------------
22166 # | 01 02 03 04 05 06 07 08 09 10 |
22167 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
22169 # | 11 12 13 14 15 16 17 18 19 20 |
22170 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
22172 # | 21 22 23 24 25 26 27 28 29 30 |
22173 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
22175 # | 31 32 33 34 35 36 37 38 39 40 |
22176 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
22177 # -------------------------------------------------------
22178 # Typical firmware identification F5 "etat 6":
22179 # P287.02.04b (AZERTY)
22180 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
22181 # P298.03.03 (monochrome) or P374.03.02 (colour)
22183 # SM SDP mode (VIP command): ^[[?=h
22184 # RIS (erases screen): ^[c
22185 # DMI disable keyboard: ^[`
22186 # SM double rendition mode: ^[[?>h
22187 # RM solicited status mode: ^[[5l
22188 # RM character mode: ^[[>l
22189 # RM echoplex mode: ^[[12l
22190 # RM column tab mode: ^[[18l
22191 # RM forbid SS2 keyboard mode: ^[[?<l
22192 # SM scroll mode: ^[[=h
22193 # FCF enable XON/XOFF: ^[P1s^[\
22194 # MTL select end msg character: ^[[^Wp
22195 # EMI enable keyboard: ^[b
22196 # RIS retour etat initial: ^[c
22197 # enable FC keypad: ^[[?<h,
22198 # MPW map status line window: ^[PY99:98^[\
22199 # SCP select status line: ^[[0;98v
22200 # ED erase entire partition: ^[[2J
22201 # SCP select main partition: ^[[v
22202 # SM character insertion mode: ^[[4h
22203 # RM character replacement mode: ^[[4l
22204 # COO cursor on: ^[[r
22205 # COO cursor off: ^[[1r
22206 # SGR dim (turquoise) rev attr: ^[[2;7m
22207 # SGR Data normal attr: ^[[m
22208 # SO Line-graphic mode ON: ^N
22209 # SI Line-graphic mode OFF: ^O
22210 # MC start routing to printer: ^[[5i
22211 # MC stop routing to printer: ^M^[[4i
22214 # This entry covers the following terminals:
22215 # dku7102, tws2102, and tws models 2105 to 2112
22216 tws-generic|dku7102|Bull Questar tws terminals,
22217 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
22218 cols#80, it#8, lines#24, wsl#80,
22219 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
22220 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
22221 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
22222 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
22223 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22224 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
22225 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
22226 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
22227 il1=\E[L, ind=\n, invis=\E[0;8m,
22228 is1=\E[?=h\Ec\E`\E[?>h\EPY99:98\E\\,
22229 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
22230 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
22231 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
22232 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
22233 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
22234 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
22235 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
22236 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
22237 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
22238 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
22239 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
22240 %p7%t;8%;m%?%p9%t\016%e\017%;,
22241 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\,
22242 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
22243 tsl=\EPY99:98\E\\\E[0;98v\E[2;7m,
22244 tws2102-sna|dku7102-sna|Bull Questar tws2102 for SNA,
22245 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
22247 tws2103|xdku|Bull Questar tws2103,
22248 ht=^I, use=tws-generic,
22249 tws2103-sna|dku7103-sna|Bull Questar tws2103 for SNA,
22250 ht=^I, use=tws2102-sna,
22251 dku7102-old|Bull Questar 200 DKU7102 (microcode version < 6),
22252 clear=\E[2J\E[H, cup@, dl@, dl1@,
22253 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
22254 il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m,
22256 dku7202|Bull Questar 200 DKU7202 (colour/character attributes),
22257 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
22258 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
22259 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
22260 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
22262 #=========================================================#
22263 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
22264 #=========================================================#
22266 # Description written by J. Staerck (BULL SA)
22267 # Copyright (c) 1989 BULL SA
22268 #---------------------------------------------------------------------------
22269 # This entry is used for terminals with VT320 emulation mode
22270 # and following set-up :
22271 # 8 bit ISO Latin Character Set (ISO 8859-1),
22272 # 7 bit Control Characters,
22273 # 80 columns screen.
22274 # Hereafter are some DEC vt terminals' commands. (valid on VT200 and 300)
22275 # They are used in string capabilities with VT220-320 emulation mode.
22276 # In the following DEC definitions, two kinds of terminfo databases are
22278 # 1. the first with Command Sequence Introducer starting with escape
22279 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
22280 # 2. the second with Command Sequence Introducer starting with escape
22281 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
22282 # Soft Terminal Reset esc [ ! p
22283 # RIS (erases screen): esc c
22284 # DECKPNM numeric keypad mode: esc >
22285 # DECKPAM applic. keypad mode: esc =
22286 # DECSTBM Scrolling region: esc [ r
22287 # SCS select G0 = US: esc ( B
22288 # SCS select G1 = line-graphic: esc ) 0
22289 # Select 7-bit C1 controls: esc sp F
22290 # Select 8-bit C1 controls: esc sp G
22291 # Select cursor home: esc [ H
22292 # Select erase screen: esc [ J
22293 # SM KAM lock keyboard: esc [ 2 h
22294 # RM KAM unlock keyboard: esc [ 2 l
22295 # SM SRM local echo off: esc [ 1 2 h
22296 # RM SRM local echo on: esc [ 1 2 l
22297 # SM LNM New line : esc [ 2 0 h
22298 # RM LNM return = CR only: esc [ 2 0 l
22299 # SM DECCKM cursor keys mode: esc [ ? 1 h
22300 # RM DECCKM appli. keys mode: esc [ ? 1 l
22301 # SM DECANM ANSI mode on: esc [ ? 2 h
22302 # RM DECANM ANSI mode off: esc [ ? 2 l
22303 # SM DECCOLM 132-column screen: esc [ ? 3 h
22304 # RM DECCOLM 80-column screen: esc [ ? 3 l
22305 # SM DECSCLM Smooth scroll: esc [ ? 4 h
22306 # RM DECSCLM Jump scroll: esc [ ? 4 l
22307 # SM DECSCNM screen light backgr. esc [ ? 5 h
22308 # RM DECSCNM screen dark backgr. esc [ ? 5 l
22309 # SM DECOM move within margins: esc [ ? 6 h
22310 # RM DECOM move outside margins: esc [ ? 6 l
22311 # SM DECAWM auto right margin: esc [ ? 7 h
22312 # RM DECAWM auto right margin: esc [ ? 7 l
22313 # SM DECARM auto repeat: esc [ ? 8 h
22314 # RM DECARM auto repeat: esc [ ? 8 l
22315 # DECSASD Select active main: esc [ 0 $ }
22316 # DECSASD Select active status: esc [ 1 $ }
22317 # DECSSDT Select status none: esc [ 0 $ ~
22318 # DECSSDT Select status indic.: esc [ 1 $ ~
22319 # DECSSDT Select status host-wr: esc [ 2 $ ~
22320 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
22321 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
22322 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
22323 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
22324 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
22325 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
22326 # SM DECKBUM clavier informatique esc [ ? 6 8 h
22327 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
22328 # DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 " p
22329 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
22330 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
22331 # DECSCL VT300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
22332 # Char. and Line attributes: esc [ Ps ... Ps m
22333 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
22334 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
22337 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
22338 bq300|Bull VT320 ISO Latin 1 80 columns terminal,
22339 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
22340 cols#80, it#8, lines#24, vt#3, wsl#80,
22341 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22342 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22343 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
22344 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
22345 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22346 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
22347 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
22348 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
22349 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
22350 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
22351 is1=\E[63;1"p\E[2h,
22352 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22354 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
22355 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
22356 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
22357 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
22358 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
22359 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
22360 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~,
22361 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE,
22362 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
22363 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
22364 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
22366 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
22367 %;m%?%p9%t\E(0%e\E(B%;,
22368 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
22369 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
22370 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+enq,
22371 use=vt220+vtedit, use=ansi+pp, use=vt220+cvis,
22372 bq300-rv|Bull VT320 reverse 80 columns,
22373 flash=\E[?5l$<50>\E[?5h,
22374 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22377 bq300-w|Bull VT320 132 columns,
22379 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22381 rs2=\E[?3h, use=bq300,
22382 bq300-w-rv|Bull VT320 reverse mode 132 columns,
22384 flash=\E[?5l$<50>\E[?5h,
22385 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22387 rs2=\E[?3h, use=bq300,
22389 # This entry is used for terminals with VT320 emulation mode
22390 # and following set-up :
22391 # 8 bit ISO Latin Character Set (ISO 8859-1),
22392 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
22393 # 80 columns screen.
22394 # Soft Terminal Reset csi ! p
22395 # RIS (erases screen): esc c
22396 # DECKPNM numeric keypad mode: esc >
22397 # DECKPAM applic. keypad mode: esc =
22398 # DECSTBM Scrolling region: esc [ r
22399 # SCS select G0 = US: esc ( B
22400 # SCS select G1 = line-graphic: esc ) 0
22401 # Select 7-bit C1 controls: esc sp F
22402 # Select 8-bit C1 controls: esc sp G
22403 # Select cursor home: csi H
22404 # Select erase screen: csi J
22405 # SM KAM lock keyboard: csi 2 h
22406 # RM KAM unlock keyboard: csi 2 l
22407 # SM SRM local echo off: csi 1 2 h
22408 # RM SRM local echo on: csi 1 2 l
22409 # SM LNM New line : csi 2 0 h
22410 # RM LNM return = CR only: csi 2 0 l
22411 # SM DECCKM cursor keys mode: csi ? 1 h
22412 # RM DECCKM appli. keys mode: csi ? 1 l
22413 # SM DECANM ANSI mode on: csi ? 2 h
22414 # RM DECANM ANSI mode off: csi ? 2 l
22415 # SM DECCOLM 132-column screen: csi ? 3 h
22416 # RM DECCOLM 80-column screen: csi ? 3 l
22417 # SM DECSCLM Smooth scroll: csi ? 4 h
22418 # RM DECSCLM Jump scroll: csi ? 4 l
22419 # SM DECSCNM screen light backgr. csi ? 5 h
22420 # RM DECSCNM screen dark backgr. csi ? 5 l
22421 # SM DECOM move within margins: csi ? 6 h
22422 # RM DECOM move outside margins: csi ? 6 l
22423 # SM DECAWM auto right margin: csi ? 7 h
22424 # RM DECAWM auto right margin: csi ? 7 l
22425 # SM DECARM auto repeat: csi ? 8 h
22426 # RM DECARM auto repeat: csi ? 8 l
22427 # DECSASD Select active main: csi 0 $ }
22428 # DECSASD Select active status: csi 1 $ }
22429 # DECSSDT Select status none: csi 0 $ ~
22430 # DECSSDT Select status indic.: csi 1 $ ~
22431 # DECSSDT Select status host-wr: csi 2 $ ~
22432 # SM DECTCEM Visible cursor: csi ? 2 5 h
22433 # RM DECTCEM Invisible cursor: csi ? 2 5 l
22434 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
22435 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
22436 # DECSCL VT300 mode 8-bit ctrl: csi 6 3 " p
22437 # or DECSCL VT300 mode 8-bit ctrl: csi 6 3 ; 0 " p
22438 # DECSCL VT300 mode 7-bit ctrl: csi 6 3 ; 1 " p
22439 # Char. and Line attributes: csi Ps ... Ps m
22440 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
22441 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
22442 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
22443 bq300-8|Bull VT320 full 8 bits 80 columns,
22444 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
22445 cols#80, it#8, lines#24, vt#3, wsl#80,
22446 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22447 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
22448 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
22449 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
22450 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
22451 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
22452 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
22453 el=\233K, el1=\2331K, enacs=\E(B\E)0,
22454 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
22455 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
22456 ind=\ED, is1=\E[63;2"p\E[2h,
22457 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22459 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
22460 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
22461 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
22462 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
22463 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
22464 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
22465 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
22466 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
22467 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
22468 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
22469 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
22470 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
22471 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
22472 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
22473 s0ds=\E(B, s1ds=\E(0, sc=\E7,
22474 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22475 1%;m%?%p9%t\E(0%e\E(B%;,
22476 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
22477 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
22478 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
22480 bq300-8rv|Bull VT320 8-bit reverse mode 80 columns,
22481 flash=\233?5l$<50>\233?5h,
22482 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22485 bq300-8w|Bull VT320 8-bit 132 columns,
22487 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22489 rs2=\233?3h, use=bq300-8,
22490 bq300-w-8rv|Bull VT320 8-bit reverse mode 132 columns,
22492 flash=\233?5l$<50>\233?5h,
22493 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22495 rs2=\233?3h, use=bq300-8,
22497 # This entry is used for terminals with VT320 emulation mode
22498 # a 102 keys keyboard (PC scancode !) and following set-up :
22499 # 8 bit ISO Latin Character Set (ISO 8859-1),
22500 # 7 bit Control Characters,
22501 # 80 columns screen.
22502 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
22503 kbs=^H, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~,
22504 kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@,
22505 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~,
22506 kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, krdo@, kslt@, lf1@, lf2@,
22507 lf3@, lf4@, use=vt220+pcedit, use=bq300,
22508 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
22509 flash=\E[?5l$<50>\E[?5h,
22510 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22513 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
22515 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22517 rs2=\E[?3h, use=bq300-pc,
22518 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
22520 flash=\E[?5l$<50>\E[?5h,
22521 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
22523 rs2=\E[?3h, use=bq300-pc,
22524 # 8 bit ISO Latin Character Set (ISO 8859-1),
22525 # 8 bit Control Characters,
22526 # 80 columns screen.
22527 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
22528 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
22529 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
22530 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
22531 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22532 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
22533 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
22534 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
22535 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
22536 flash=\E[?5l$<50>\E[?5h,
22537 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22540 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
22542 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22544 rs2=\E[?3h, use=bq300-8-pc,
22545 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
22547 flash=\E[?5l$<50>\E[?5h,
22548 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
22550 rs2=\E[?3h, use=bq300-8-pc,
22552 #======================================================#
22553 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
22554 #======================================================#
22556 # normal mode, 8 bits, 80 columns terminal.
22557 # BLD bell disable ^[g
22558 # BLE bell enable ^[h
22559 # CAMR char. attr. mode reset ^[[G
22560 # CAMS char. attr. mode set ^[[D
22562 # CM character mode (async.) ^[k
22563 # EP echoplex mode (by host) ^[m
22564 # IM insert mode set ^[[I
22565 # IMR insert mode reset ^[[J
22566 # KBL keyboard lock (reset) ^[[X
22567 # KBU keyboard unlock (set) ^[[W
22568 # LGR Line-graphic mode reset ^[F
22569 # LGS Line-graphic mode set ^[G
22570 # NEP non echoplex mode (by host) ^[l
22571 # PDS print data space ^[[0p
22572 # PDT print data terminator ^[[<p
22573 # PHD print host data ^[[3p
22574 # PRES print adapter reset ^[[2p
22575 # RBM block mode reset ^[[E
22577 # RIS reset initial state: ^[c
22578 # RMR roll mode reset ^[q
22579 # RMS roll mode set ^[r
22580 # SCD scroll down (72 lines) ^[[1s
22581 # SCU scroll up (72 lines) ^[[0s
22582 # SLL status line lock ^[O
22583 # SLR status line reset ^[v
22584 # SLS status line set ^[w
22585 # SM78 set mode vip7800 ^[[1q
22586 # SSP0 partition 0 set ^[[00u
22587 # SSP1 partition n format 1 ^[[PnPnSTRINGu
22588 # SSP2 partition n format 2 ^[[PnPnSTRINGu
22589 # SSP3 partition n format 3 ^[[PnPnu
22590 # SSPR multi-part. reset ^[[<>u
22591 # TBC tab clear (at cursor pos.) ^[[g
22592 # TBI tab initialize ^[[N
22593 # TBS tab set (at cursor pos.) ^[p
22595 # ATR attribute (visual)
22598 # hide (blank) : ^[sH
22599 # inverse video : ^[sI
22604 # This covers the vip7800 and BQ3155-vip7800
22605 vip|Bull Questar 3155-7800,
22606 am, eslok, hs, km, mc5i, msgr, xenl, xon,
22607 cols#80, it#8, lines#24, vt#3, wsl#80,
22608 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
22609 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22610 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
22611 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
22612 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
22613 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
22614 is2=\E[00u\E[<>001001024080024080u\E[01u,
22615 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
22616 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
22617 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
22618 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
22619 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
22620 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
22621 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
22622 kf4=\E8, kf5=\E:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
22623 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
22624 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
22625 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
22626 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
22627 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
22628 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
22629 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
22630 smul=\Es_, tbc=\E[N, tsl=\Ew,
22631 # normal screen, 8 bits, 132 columns terminal.
22632 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
22634 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
22635 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
22637 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
22638 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
22639 cols#132, lines#72, wsl#132,
22640 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
22645 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
22646 # that is smaller than the screen, and puts up a warning message
22647 # outside the window. Te erases the warning message, puts the
22648 # window back to be the whole screen, and puts the cursor at just
22649 # below the small window. I defined <cnorm> and <civis> to really turn
22650 # the cursor on and off, but I have taken this out since I don't
22651 # like the cursor being turned off when vi exits.
22652 cg7900|chromatics|chromatics 7900,
22655 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
22656 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
22657 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
22658 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
22660 rmso=\001C1\,\001c2\,,
22661 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
22662 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
22663 \001W0\,0\,79\,39\,,
22664 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
22666 #### Computer Automation
22669 ca22851|Computer Automation 22851,
22672 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
22673 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
22674 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
22679 # This entry has correct padding and the undocumented "ri" capability
22680 cyb83|xl83|Cybernex xl-83,
22683 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
22684 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
22685 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
22686 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
22687 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
22688 cyb110|mdl110|Cybernex mdl-110,
22691 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
22692 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
22693 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
22694 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
22695 ht=\011$<43>, ich1=\016A\035$<3.5>,
22696 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
22700 # Datapoint is gone. They used to be headquartered in Texas.
22701 # They created ARCnet, an Ethernet competitor that flourished for a while
22702 # in the early 1980s before 3COM got wise and cut its prices. The service
22703 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
22706 dp3360|datapoint|Datapoint 3360,
22709 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
22710 ed=^_, el=^^, home=^], ind=\n,
22712 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
22713 # The Datapoint 8242 Workstation was sold at least between 1985
22714 # and 1989. To make the terminal work with this entry, press
22715 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
22716 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
22717 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
22718 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
22719 # fact unusable because the strings sent by the terminal conflict
22720 # with other keys).
22721 # The terminal is capable of displaying "box draw" characters.
22722 # For each graphic character you must send 2 ESC's (\E\E) followed
22723 # by a control character as follows:
22724 # character meaning
22725 # ========= =======
22728 # ctrl-G bottom tee
22731 # ctrl-J top left corner
22732 # ctrl-K top right corner
22733 # ctrl-L bottom left corner
22734 # ctrl-M bottom right corner
22735 # ctrl-N horizontal line
22736 # ctrl-O vertical line
22737 # Unfortunately this cannot be fitted into the termcap/terminfo
22738 # description scheme.
22739 dp8242|Datapoint 8242,
22742 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
22743 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
22744 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
22745 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22746 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
22747 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
22748 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
22749 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
22750 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
22751 smso=\E^E, smul=\E^F,
22752 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
22755 #### DEC terminals (Obsolete types: DECwriter and VT40/42/50)
22757 # These entries came from DEC's official terminfos for its older terminals
22758 # (which happen to be identical to the AT&T/SCO terminal descriptions),
22759 # Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support Engineering
22760 # may have had more information. Updated terminfos and termcaps were available
22761 # at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
22763 # DEC's terminfos did not describe the auxiliary keypad.
22765 # DECScope of course had no "function keys", but this building block assigns
22766 # the three blank keys at the top of the auxiliary (numeric) keypad, using
22767 # the same analogy as VT100 (also lacking function-keys).
22769 # These assignments use the same layout for 0-9 as VT100+keypad; the VT52
22770 # keypad had its cursor-keys on the right-column as shown -TD
22771 # _______________________________________
22772 # | PF1 | PF2 | PF3 | c-up |
22773 # | \EP | \EQ | \ER | \EA |
22774 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_|
22776 # | \E?w | \E?x | \E?y | \EB |
22777 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____|
22778 # | 4 | 5 | 6 | c-right |
22779 # | \E?t | \E?u | \E?v | \EC |
22780 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_|
22781 # | 1 | 2 | 3 | c-left |
22782 # | \E?q | \E?r | \E?s | \ED |
22783 # |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____|
22784 # | 0 | . | enter |
22785 # | \E?p | \E?n | \E?M |
22786 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
22788 vt52+keypad|DECScope auxiliary keypad,
22789 ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y,
22790 kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
22791 kf8=\E?w, kf9=\E?x,
22796 bel=^G, cr=\r, cub1=^H, cud1=\n,
22800 bel=^G, cr=\r, cub1=^H, cud1=\n,
22805 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22806 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
22808 cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22809 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ],
22810 use=vt52+keypad, use=vt50,
22812 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
22813 vt61|vt-61|vt61.5|DEC VT61,
22815 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
22816 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
22817 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
22818 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
22821 # The gigi does standout with red!
22822 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
22823 gigi|vk100|DEC gigi graphics terminal,
22826 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
22827 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
22828 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
22829 el=\E[K, ht=^I, ind=\n,
22830 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
22831 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
22832 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
22833 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22834 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
22837 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
22838 # a PC differentiated from the IBM clones. It was a total, ludicrous,
22839 # grossly-overpriced failure (among other things, DEC's OS didn't include
22840 # a format program, so you had to buy pre-formatted floppies from DEC at
22841 # a hefty premium!).
22842 pro350|decpro|DEC pro console,
22844 cols#80, it#8, lines#24,
22845 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22846 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
22847 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
22848 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22849 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
22850 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
22851 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
22856 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
22857 dw2|decwriter|dw|DECwriter II,
22860 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
22861 # \E(B Use U.S. character set (otherwise # => british pound !)
22862 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
22863 # \E[w 10 char/in pitch
22864 # \E[1;132 full width horizontal margins
22865 # \E[2g clear all tab stops
22867 # \E[66t 66 lines/page (for \f)
22868 # \E[1;66r full vertical page can be printed
22869 # \E[4g clear vertical tab stops
22870 # \E> disable alternate keypad mode (so it transmits numbers!)
22871 # \E[%i%p1%du set tab stop at column %d (origin == 1)
22872 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
22875 # The dw3 does standout with wide characters.
22877 dw3|la120|DECwriter III,
22880 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
22881 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
22882 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
22884 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
22888 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
22889 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
22891 # These aren't official
22892 ln03|DEC ln03 laser printer,
22895 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
22896 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
22898 ln03-w|DEC ln03 laser printer 132 cols,
22900 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
22901 kcud1=\n, nel=\r\n, use=ln03,
22903 #### Delta Data (dd)
22906 # Untested. The cup sequence is hairy enough that it probably needs work.
22907 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
22908 # There are BSD-derived termcap entries floating around for this puppy
22909 # that are *certainly* wrong.
22910 delta|dd5000|delta data 5000,
22913 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
22914 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
22916 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
22918 #### Digital Data Research (ddr)
22921 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
22922 ddr|rebus3180|ddr3180|Rebus/DDR 3180 VT100 emulator,
22924 cols#80, it#8, lines#24, vt#3,
22925 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22926 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
22927 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
22928 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
22929 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
22930 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
22931 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
22932 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
22933 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
22934 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
22935 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
22938 #### Evans & Sutherland
22941 # Jon Leech <leech@cs.unc.edu> tells us:
22942 # The ps300 was the Evans & Sutherland Picture System 300, a high
22943 # performance 3D vector graphics system with a bunch of specialized hardware.
22944 # Approximate date of release was 1982 (early 80s, anyway), and it had several
22945 # evolutions including (limited) color versions such as the PS330C. PS300s
22946 # were effectively obsolete by the late 80s, replaced by raster graphics
22947 # systems, although specialized applications like molecular modeling
22948 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
22949 # are out of production, though of course E&S is very much alive (in 1996).
22950 # (ps300: changed ":pt@:" to "it@" -- esr)
22952 ps300|Picture System 300,
22955 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
22957 #### General Electric (ge)
22960 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
22963 bel=^G, cr=\r, cud1=\n, ind=\n,
22965 #### Heathkit/Zenith
22968 # Here is a description of the H19 DIP switches:
22971 # 0-3 = baud rate as follows:
22976 # 0 1 0 1 1200 baud
22977 # 1 0 0 0 2400 baud
22978 # 1 0 1 0 4800 baud
22979 # 1 1 0 0 9600 baud
22980 # 1 1 0 1 19.2K baud
22982 # 4 = parity (0 = no parity)
22983 # 5 = even parity (0 = odd parity)
22984 # 6 = stick parity (0 = normal parity)
22985 # 7 = full duplex (0 = half duplex)
22988 # 0 = block cursor (0 = underscore cursor)
22989 # 1 = no key click (0 = keyclick)
22990 # 2 = wrap at end of line (0 = no wrap)
22991 # 3 = auto LF on CR (0 = no LF on CR)
22992 # 4 = auto CR on LF (0 = no CR on LF)
22993 # 5 = ANSI mode (0 = VT52 mode)
22994 # 6 = keypad shifted (0 = keypad unshifted)
22995 # 7 = 50Hz refresh (1 = 60Hz refresh)
22997 # Factory Default settings are as follows:
22999 # S401 1 0 0 0 1 1 0 0
23000 # S402 0 0 0 0 0 0 0 0
23001 # (h19: I added <rmam>/<smam> based on the init string;
23002 # also added empty <acsc> to suppress a tic warning -- esr)
23003 h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ANSI mode,
23004 OTbs, am, mir, msgr,
23005 cols#80, it#8, lines#24,
23006 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
23007 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
23008 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
23009 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
23010 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
23011 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
23012 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
23013 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
23014 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
23015 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
23016 h19-bs|Heathkit w/keypad shifted,
23017 rmkx=\Eu, smkx=\Et, use=h19-b,
23018 h19-us|h19us|h19-smul|Heathkit w/keypad shifted/underscore cursor,
23019 rmkx=\Eu, smkx=\Et, use=h19-u,
23020 # (h19: merged in <ip> from BSDI hp19-e entry>;
23021 # also added empty <acsc> to suppress a tic warning --esr)
23022 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
23023 # Tim tells us that:
23024 # I have an old Zenith-19 terminal at home that still gets a lot of use.
23025 # This terminal suffers from the same famous insert-mode padding lossage
23026 # that has been acknowledged for the Z29 terminal. Emacs is nearly
23027 # unusable on this box, since even a half-scroll up or down the window
23028 # causes flaming terminal death.
23030 # On the Z19, the only way I have found around this problem is to remove
23031 # the :al: and :dl: entries entirely. No amount of extra padding will
23032 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
23033 # makes Emacs a little slower, but it remains in the land of the living.
23035 h19|heath|h19-b|heathkit|heath-19|z19|zenith|Heathkit h19,
23036 OTbs, am, eslok, hs, mir, msgr,
23037 cols#80, it#8, lines#24,
23038 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
23039 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
23040 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
23041 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
23042 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
23043 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
23044 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
23045 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
23046 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
23047 h19-u|Heathkit with underscore cursor,
23048 cnorm@, cvvis@, use=h19-b,
23049 h19-g|h19g|Heathkit w/block cursor,
23050 cnorm=\Ex4, cvvis@, use=h19-b,
23051 alto-h19|altoh19|altoheath|alto-heath|alto emulating Heathkit h19,
23053 dl1=\EM, il1=\EL, use=h19,
23055 # The major problem with the Z29 is that it requires more padding than the Z19.
23057 # The problem with declaring an H19 to be synonymous with a Z29 is that
23058 # it needs more padding. It especially loses if a program attempts
23059 # to put the Z29 into insert mode and insert text at 9600 baud. It
23060 # even loses worse if the program attempts to insert tabs at 9600
23061 # baud. Adding padding to text that is inserted loses because in
23062 # order to make the Z29 not die, one must add so much padding that
23063 # whenever the program tries to use insert mode, the effective
23064 # rate is about 110 baud.
23066 # What program would want to put the terminal into insert mode
23067 # and shove stuff at it at 9600 baud you ask?
23069 # Emacs. Emacs seems to want to do the mathematically optimal
23070 # thing in doing a redisplay rather than the practical thing.
23071 # When it is about to output a line on top of a line that is
23072 # already on the screen, instead of just killing to the end of
23073 # the line and outputting the new line, it compares the old line
23074 # and the new line and if there are any similarities, it
23075 # constructs the new line by deleting the text on the old line
23076 # on the terminal that is already there and then inserting new
23077 # text into the line to transform it into the new line that is
23078 # to be displayed. The Z29 does not react kindly to this.
23080 # But don't cry for too long.... There is a solution. You can make
23081 # a termcap entry for the Z29 that says the Z29 has no insert mode.
23082 # Then Emacs cannot use it. "Oh, no, but now inserting into a
23083 # line will be really slow", you say. Well there is a sort of a
23084 # solution to that too. There is an insert character option on
23085 # the Z29 that will insert one character. Unfortunately, it
23086 # involves putting the terminal into ANSI mode, inserting the
23087 # character, and changing it back to H19 mode. All this takes 12
23088 # characters. Pretty expensive to insert one character, but it
23089 # works. Either Emacs doesn't try to use its inserting hack when
23090 # it's only given an insert character ability or the Z29 doesn't
23091 # require padding with this (the former is probably more likely,
23092 # but I haven't checked it out).
23093 # (z29: added empty <acsc> to suppress a tic warning, merged in
23094 # status line capabilities from BRL entry --esr)
23095 z29|zenith29|z29b|Zenith z29b,
23096 OTbs, OTpt, am, eslok, hs, mir, msgr,
23097 OTkn#10, cols#80, lines#24,
23098 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
23099 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
23100 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
23101 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
23102 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
23103 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
23104 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
23105 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
23106 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
23107 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
23108 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
23109 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
23110 # z29 in ANSI mode. Assumes that the cursor is in the correct state, and that
23111 # the world is stable. <rs1> causes the terminal to be reset to the state
23112 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
23113 # cursor, bc -> block cursor.
23114 # From: Mike Meyers
23115 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
23116 # looks VT100-compatible -- esr)
23117 z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ANSI mode,
23118 OTbs, OTpt, am, eslok, hs, mir, msgr,
23119 OTkn#10, cols#80, it#8, lines#24,
23120 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
23121 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
23122 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
23123 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
23124 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
23125 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
23126 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
23127 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
23128 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
23129 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
23130 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
23131 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
23132 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
23133 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
23135 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
23136 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
23137 z29a-kc-uc|h29a-kc-uc|Zenith z29 ANSI mode with keyclick and underscore cursor,
23138 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
23141 z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ANSI mode with block cursor and no keyclick,
23142 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
23145 z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ANSI mode with underscore cursor and no keyclick,
23146 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
23149 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
23150 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
23151 am, eslok, hs, mc5i, mir, msgr, xon,
23153 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
23154 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
23155 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
23156 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
23157 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
23158 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
23159 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
23160 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
23161 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
23162 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
23163 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
23164 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
23165 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
23166 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
23167 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
23168 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
23169 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
23170 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
23171 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
23173 # From: Brad Brahms <Brahms@USC-ECLC>
23174 z100|h100|z110|z-100|h-100|Heath/Zenith z-100 pc with color monitor,
23175 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
23176 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
23177 z100bw|h100bw|z110bw|z-100bw|h-100bw|Heath/Zenith z-100 pc,
23178 OTbs, OTpt, mir, msgr,
23179 OTkn#10, cols#80, it#8, lines#24,
23180 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
23181 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
23182 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
23183 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
23184 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
23185 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
23186 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
23187 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
23188 smir=\E@, smso=\Ep,
23189 p19|h19-b with il1/dl1,
23190 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
23191 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
23192 # (ztx: removed duplicate :sr: -- esr)
23193 ztx|ztx11|zt-1|htx11|ztx-1-a|Heath/Zenith ztx-10 or 11,
23194 OTbs, am, eslok, hs,
23195 cols#80, it#8, lines#24,
23196 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
23197 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
23198 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
23199 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
23200 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
23201 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
23202 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
23203 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
23205 #### IMS International (ims)
23207 # There was a company called IMS International located in Carson City,
23208 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
23209 # bus/Z80 hardware and a line of terminals called Ultimas.
23212 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
23213 ims950-b|bare ims950 no init string,
23215 # (ims950: removed obsolete ":ko@:" -- esr)
23216 ims950|IMS TeleVideo 950 emulation,
23218 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
23219 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
23220 # (ims950-rv: removed obsolete ":ko@:" -- esr)
23221 ims950-rv|IMS tvi950 rev video,
23223 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
23224 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
23225 ims-ansi|ultima2|ultimaII|IMS Ultima II,
23227 cols#80, it#8, lines#24,
23228 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
23229 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
23230 ht=^I, if=/usr/share/tabset/vt100,
23231 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
23232 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
23233 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
23236 #### Intertec Data Systems
23238 # I think this company is long dead as of 1995. They made an early CP/M
23239 # micro called the "Intertec Superbrain" that was moderately popular,
23240 # then sank out of sight.
23243 superbrain|Intertec Superbrain,
23246 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
23247 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
23248 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
23249 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
23250 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
23251 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
23252 # and the reverse is actually true. Try it. -- esr)
23253 intertube|intertec|Intertec InterTube,
23256 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
23257 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
23258 ind=\n, rmso=\E0@, smso=\E0P,
23259 # The intertube 2 has the "full duplex" problem like the Tektronix 4025: if you
23260 # are typing and a command comes in, the keystrokes you type get interspersed
23261 # with the command and it messes up
23262 intertube2|Intertec data systems InterTube 2,
23264 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
23265 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
23266 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
23268 #### Ithaca Intersystems
23270 # This company made S100-bus personal computers long ago in the pre-IBM-PC
23271 # past. They used to be reachable at:
23273 # Ithaca Intersystems
23274 # 1650 Hanshaw Road
23275 # Ithaca, New York 14850
23277 # However, the outfit went bankrupt years ago.
23280 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
23281 # These entries were written (originally in termcap syntax) by Brian Yandell
23282 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
23283 # University of Wisconsin.
23285 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
23286 # removed <if=/usr/share/tabset/init.graphos> and
23287 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
23288 graphos|graphos III,
23290 cols#80, it#8, lines#24,
23291 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
23292 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
23293 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23294 cuu=\E[%p1%dA, cuu1=\E[A,
23295 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
23296 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
23297 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23298 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
23299 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
23300 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
23301 smir=\E[4h, smso=\E[7m,
23302 graphos-30|graphos III with 30 lines,
23304 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
23308 # These people used to be reachable at:
23311 # 1393 Main Street,
23312 # Waltham, MA 02154
23313 # Vox: (617)-890-5796.
23315 # However, if you call that number today you'll get an insurance company.
23316 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
23317 # 26 Feb 1997 that says:
23319 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
23320 # for ~7 years. Modgraph still in business. Products are rugged laptop and
23321 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
23322 # panel-mount etc). I can be emailed at sonfour@aol.com
23324 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
23325 # dated 1984. According to the manual, it featured Tek 4010/4014
23326 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
23329 modgraph|mod24|modgraph terminal emulating VT100,
23332 cvvis=\E\^9;0s\E\^7;1s,
23333 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
23334 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
23335 \E\^11;81s\E\^11;89s,
23336 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
23337 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
23338 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
23340 cols#80, it#8, lines#24,
23341 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
23342 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
23343 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
23344 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
23345 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
23346 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
23347 1s\E\^9;1s\E\^27;1,
23350 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
23351 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
23352 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
23353 # mark and using delete-to-killbuffer work correctly. However, we would
23354 # like normal mode of operation to be using a Modgraph with 48 line setting.
23355 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
23356 # the setting mark and delete-to-killbuffer results in the deletion of only
23357 # the line the mark is set on.
23358 # We've discovered that the delete-to-killbuffer works correctly
23359 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
23360 # the first line disappears but a ctrl-l shows that it did work
23362 modgraph48|mod|Modgraph w/48 lines,
23363 OTbs, OTpt, am, xenl,
23364 cols#80, it#8, lines#48, vt#3,
23365 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
23366 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
23367 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
23368 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
23369 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
23370 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
23371 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
23372 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
23373 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
23374 smso=\E[7m, smul=\E[4m,
23376 #### Morrow Designs
23378 # This was George Morrow's company. They started in the late 1970s making
23379 # S100-bus machines. They used to be reachable at:
23382 # 600 McCormick St.
23383 # San Leandro, CA 94577
23385 # but they're long gone now (1995).
23388 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
23389 # Jeff's specimen was dated June 1984.
23390 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
23391 mt70|mt-70|Morrow MD-70; native Morrow mode,
23392 am, mir, msgr, xon,
23393 cols#80, it#8, lines#24,
23394 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
23395 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
23396 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
23397 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
23398 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
23399 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
23400 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
23401 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
23402 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
23403 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
23404 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23405 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
23406 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
23407 smul=\EG1, tbc=\E0, use=adm+sgr,
23412 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
23414 ex155|Motorola Exorterm 155,
23416 OTkn#5, OTug#1, cols#80, lines#24,
23417 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
23418 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
23419 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
23420 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
23421 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
23425 # This company is still around in 1995, manufacturing point-of-sale systems.
23427 omron|Omron 8025AG,
23430 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
23431 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
23432 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
23436 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
23437 # were competition for things like the Tektronix 4025.
23440 # Ramtek 6221 from BRL, probably by Doug Gwyn
23441 # The following SET-UP modes are assumed for normal operation:
23442 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
23443 # NEWLINE_OFF 80_COLUMNS
23444 # Other SET-UP modes may be set for operator convenience or communication
23445 # requirements; I recommend
23446 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
23447 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
23448 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
23449 # Note that the Control-E key is useless on this brain-damaged terminal. No
23450 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
23451 rt6221|Ramtek 6221 80x24,
23452 OTbs, OTpt, msgr, xon,
23453 OTkn#4, cols#80, it#8, lines#24, vt#3,
23454 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
23455 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
23456 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
23457 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
23458 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
23459 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
23460 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23461 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
23462 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
23463 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
23464 rmso=\E[m, rmul=\E[m,
23465 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
23466 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
23468 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
23469 smul=\E[4m, tbc=\E[3g,
23470 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
23471 rt6221-w|Ramtek 6221 160x48,
23472 cols#160, lines#48,
23473 ll=\E[48;1H, use=rt6221,
23478 # RCA VP3301 or VP3501
23479 rca|RCA vp3301/vp3501,
23482 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23483 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
23489 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
23490 # The following SET-UP modes are assumed for normal operation:
23491 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
23492 # ONLINE ANSI CURSOR_VISIBLE
23493 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
23494 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
23495 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
23496 # For use with graphics software, all graphics modes should be set to factory
23497 # default. Other SET-UP modes may be set for operator convenience or
23498 # communication requirements. No delays are specified; use "stty ixon -ixany"
23499 # to enable DC3/DC1 flow control!
23500 # I commented out the scrolling capabilities since they are too slow.
23501 hirez100|Selanar HiREZ-100,
23502 OTbs, OTpt, mir, msgr, xon,
23503 OTkn#4, cols#80, it#8, lines#48, vt#3,
23504 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
23505 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
23506 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23507 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
23508 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23509 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
23510 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
23511 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
23512 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
23513 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
23514 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
23515 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
23516 9l\E[r\E[m\E(B\017\E)0\E>,
23517 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
23518 smul=\E[4m, tbc=\E[3g,
23519 hirez100-w|Selanar HiREZ-100 in 132-column mode,
23520 cols#132, use=hirez100,
23525 # From University of Wisconsin
23526 vsc|Signetics Vsc Video driver by RMC,
23528 cols#80, it#8, lines#26,
23529 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
23530 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
23531 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
23532 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
23536 # Alan Frisbie <frisbie@flying-disk.com> writes:
23538 # As you may recall, the Soroc logo consisted of their name,
23539 # with the letter "S" superimposed over an odd design. This
23540 # consisted of a circle with a slightly smaller 15 degree (approx.)
23541 # wedge with rounded corners inside it. The color was sort of
23542 # a metallic gold/yellow.
23544 # If I had been more of a beer drinker it might have been obvious
23545 # to me, but it took a clue from their service department to make
23546 # me exclaim, "Of course!" The circular object was the top of
23547 # a beer can (the old removable pop-top style) and "Soroc" was an
23548 # anagram for "Coors".
23550 # I can just imagine the founders of the company sitting around
23551 # one evening, tossing back a few and trying to decide what to
23552 # call their new company and what to use for a logo.
23555 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
23556 soroc120|iq120|soroc|Soroc iq120,
23557 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
23558 kcuf1=^L, kcuu1=^K, use=adm3a,
23559 soroc140|iq140|Soroc iq140,
23562 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23563 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
23564 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
23565 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
23566 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
23567 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
23568 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
23570 #### Southwest Technical Products
23572 # These guys made an early personal micro called the M6800.
23573 # The ct82 was probably its console terminal.
23576 # (swtp: removed obsolete ":bc=^D:" -- esr)
23577 swtp|ct82|Southwest Technical Products ct82,
23580 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
23581 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
23582 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
23583 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
23584 \017\035\027\022\011,
23585 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
23589 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
23591 # Synertek used to make ICs, various 6502-based single-board process
23592 # control and hobbyist computers, and assorted peripherals including a
23593 # series of small inexpensive terminals (I think they were one of the
23594 # first to have a "terminal-on-a-keyboard", where the terminal itself
23595 # was only slightly larger than the keyboard).
23597 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
23598 # was a 40x24 terminal that could connect to a standard TV through a
23599 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
23600 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
23601 # I have a KTM-2/80 still in working order. The KTM-2s had fully
23602 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
23603 # ROM and 2 ROMs as character generators. They were incredibly simple,
23604 # and I've never had any problems with mine (witness the fact that mine
23605 # was made in 1981 and is still working great... I've blown the video
23606 # output transistor a couple of times, but it's a 2N2222 :-)
23608 # The KTM-3 (which is what is listed in the terminfo file) was their
23609 # attempt at putting a KTM-2 in a box (and some models came with a
23610 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
23611 # control and escape sequences are very different. The KTM-3 was always
23612 # real broken, at least according to the folks I've talked to about it.
23614 # The padding in the entry is probably off--these terminals were very
23615 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
23616 # anyone with any sanity replaced the ROMs with something that provided
23617 # a reasonable subset of VT100 functionality, since the usual ROMs were
23618 # obviously very primitive... oh, you could get an upgraded ROM from
23619 # Synertek for some incredible amount of money, but what hacker with an
23620 # EPROM burner would do that? :)
23622 # Sorry I don't have any contact info; I believe they were located in
23623 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
23624 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
23625 # business these days.
23628 # Tested, seems to work fine with vi.
23629 synertek|ktm|synertek380|Synertek KTM 3/80 tubeless terminal,
23632 clear=^Z, cub1=^H, cuf1=^L,
23633 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23635 #### Tab Office Products
23637 # TAB Products Co. - Palo Alto, California
23638 # Electronic Office Products,
23639 # 1451 California Avenue 94304
23641 # I think they're out of business.
23644 # The tab 132 uses xon/xoff, so no padding needed.
23645 # <smkx>/<rmkx> have nothing to do with arrow keys.
23646 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
23647 # Seems to be no way to get rid of status line.
23648 # The manual for this puppy was dated June 1981. It claims to be VT52-
23649 # compatible but looks more VT100-like -esr
23652 # https://ub.fnwi.uva.nl/computermuseum/tab13215g.html
23653 # This monochrome graphics terminal of TAB Products, California, is a DEC
23654 # VT52/VT100/VT132 compatible alphanumeric terminal (TAB 132/15),
23655 # factory-fitted with additional hardware for Tektronix 4010 emulation.
23656 # Also the terminal understands a selection of Tektronix 4027 commands.
23657 tab132|tab|tab132-15|tab 132/15,
23659 OTdN@, cols#80, lines#24, lm#96,
23660 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
23661 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
23662 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
23663 use=decid+cpr, use=vt100+4bsd,
23664 tab132-w|tab132 in wide mode,
23666 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
23667 tab132-rv|tab132 in reverse-video mode,
23668 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
23669 tab132-w-rv|tab132 in reverse-video/wide mode,
23670 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
23675 # Research Incorporated
23676 # 6425 Flying Cloud Drive
23677 # Eden Prairie, MN 55344
23678 # Vox: (612)-941-3300
23680 # The Teleray terminals were all discontinued in 1992-93. RI still services
23681 # and repairs these beasts, but no longer manufactures them. The Teleray
23682 # people believe that all the types listed below are very rare now (1995).
23683 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
23684 # Model 100) that were ANSI-compatible.
23686 # Note two things called "teleray". Reorder should move the common one
23687 # to the front if you have either. A dumb Teleray with the cursor stuck
23688 # on the bottom and no obvious model number is probably a 3700.
23691 t3700|dumb Teleray 3700,
23694 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
23695 t3800|Teleray 3800 series,
23697 cols#80, it#8, lines#24,
23698 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23699 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
23700 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
23701 t1061|teleray|Teleray 1061,
23702 OTbs, am, km, xhp, xt,
23703 cols#80, it#8, lines#24, xmc#1,
23704 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23705 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23706 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
23707 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
23708 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
23709 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
23710 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
23711 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
23713 t1061f|Teleray 1061 with fast PROMs,
23714 dl1=\EM, il1=\EL, ip@, use=t1061,
23715 # "Teleray Arpa Special", officially designated as
23716 # "Teleray Arpa network model 10" with "Special feature 720".
23717 # This is the new (1981) fast microcode updating the older "arpa" proms
23718 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
23719 # converts the keypad to programmable function keys, and has other goodies.
23720 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
23721 # programs handle such lossage properly.
23722 # Note: this is NOT the old termcap's "t1061f with fast proms."
23723 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
23724 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
23725 t10|Teleray 10 special,
23727 cols#80, it#8, lines#24, xmc#2,
23728 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
23729 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
23730 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
23731 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
23733 # Teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
23734 # back/forth words. Put the function keys (f1-f10) where they can be
23735 # found, and turn off the other magic keys along the top row, except
23736 # for line/local. Do the magic appropriate to make the page shifts work.
23737 # Also toggle ^S/^Q for those of us who use Emacs.
23739 am, da, db, mir, xhp, xt,
23741 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
23742 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
23743 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
23744 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
23745 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
23746 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
23747 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
23748 smso=\E[7m, smul=\E[4m,
23750 #### Texas Instruments (ti)
23753 # The Silent 700 was so called because it was built around a quiet thermal
23754 # printer. It was portable, equipped with an acoustic coupler, and pretty
23755 # neat for its day.
23756 ti700|ti733|ti735|ti745|ti800|Texas Instruments Silent 700/733/735/745 or OMNI 800,
23759 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
23761 # Terminal entries for the Texas Instruments 703/707
23762 # hardcopy terminals.
23764 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/
23766 # Model 707 Data Terminal User's Manual
23767 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/2310451-0001_Silent_700_Model_707_Users_Manual_Nov1983.pdf
23769 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
23770 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0
23771 # cpi using an escape sequence. There is no 80/132-column capability in
23772 # terminfo (only the more general cpi which allows any value).
23773 ti703|ti707|Texas Instruments Silent 703/707,
23776 cuf1=\s, is2=\EPC\\, nel=\r\n, use=ti700,
23777 ti703-w|ti707-w|Texas Instruments Silent 703/707 (132 column),
23779 is2=\EPD\\, use=ti703,
23782 # Texas Instruments 916 VDT 7 bit control mode
23784 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 VT220 mode 7 bit CTRL,
23786 cbt=\E[Z, clear=\E[H\E[2J$<6>, cub=\E[%p1%dD,
23787 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,
23788 cuu=\E[%p1%dA, dch=\E[%p1%dP$<250>, dch1=\E[P,
23789 dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
23790 el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
23791 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
23792 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
23793 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
23794 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
23795 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
23796 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
23797 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
23798 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
23801 # Texas Instruments 916 VDT 8 bit control mode
23803 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 VT220 mode bit CTRL,
23804 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
23805 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
23806 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
23807 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
23808 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
23809 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
23811 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
23813 ti916-132|Texas Instruments 916 VDT VT220 132 column,
23814 cols#132, use=ti916,
23816 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
23818 ti916-8-132|Texas Instruments 916 VDT 8-bit VT220 132 column,
23819 cols#132, use=ti916-8,
23820 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
23822 cols#80, it#8, lines#24,
23823 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23824 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23825 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23826 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23827 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23828 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
23829 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
23830 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
23831 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
23832 smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23833 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
23835 cols#80, it#8, lines#24,
23836 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
23837 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
23838 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
23839 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
23840 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23841 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
23842 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
23843 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
23844 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
23845 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
23846 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
23847 cols#132, use=ti924,
23848 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
23849 cols#132, use=ti924-8,
23850 ti931|Texas Instruments 931 VDT,
23853 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
23854 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
23855 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
23856 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
23857 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
23858 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
23859 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
23860 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
23861 sgr0=\E4@, smso=\E4A, smul=\E4D,
23862 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
23863 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
23864 # (ti926-8: I corrected this from the broken SCO entry -- esr)
23865 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
23866 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
23867 ti_ansi|basic entry for ti928,
23868 am, bce, eo, xenl, xon,
23869 colors#8, cols#80, it#8, lines#25, pairs#64,
23870 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
23871 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
23872 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
23873 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
23874 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
23875 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
23876 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
23877 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
23878 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
23879 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
23880 smso=\E[7m, smul=\E[4m,
23882 # 928 VDT 7 bit control mode
23884 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
23885 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
23886 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
23887 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
23888 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
23889 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
23891 # 928 VDT 8 bit control mode
23893 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
23894 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
23895 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
23896 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
23897 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
23898 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
23899 kpp=\233T, kprt=\23335~, use=ti_ansi,
23904 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
23905 # had just <smso>=\EG6 which I think means standout was supposed to be
23906 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
23907 # <invis> might work-- esr)
23908 zen30|z30|Zentec 30,
23911 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23912 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
23913 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
23914 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
23915 smul@, use=adm+sgr,
23916 # (zen50: this had extension capabilities
23917 # :BS=^U:CL=^V:CR=^B:
23918 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
23919 # which were also in the original entry -- esr)
23920 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
23921 zen50|z50|Zentec Zephyr,
23923 cols#80, lines#24, xmc#1,
23924 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
23925 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
23926 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
23927 rmul@, smul@, use=adm+sgr,
23929 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
23930 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
23933 blink=\EM", clear=\EH\EJ, cnorm=\EP,
23934 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
23935 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
23936 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
23937 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
23938 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
23939 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
23940 smso=\EM$, smul=\EM0,
23942 ######## OBSOLETE UNIX CONSOLES
23945 #### Apollo consoles
23947 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
23948 # labeled HP700s now.
23951 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
23952 apollo|Apollo console,
23955 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
23956 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
23957 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
23958 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
23959 smso=\ES, smul=\EU, vpa=\EO+\s,
23961 # We don't know whether or not the apollo guys replicated DEC's firmware bug
23962 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
23963 # both these capabilities.
23964 apollo+vt132|Apollo console emulating VT132,
23965 rmir@, smir@, use=vt132,
23967 apollo_15P|Apollo 15 inch display,
23969 apollo_19L|Apollo 19 inch display,
23971 apollo_color|Apollo color display,
23976 # This actually describes the generic SVr4 display driver for Intel boxes.
23977 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
23978 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
23979 att6386|at386|386at|AT&T WGS 6386 console,
23981 cols#80, it#8, lines#25,
23982 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23983 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
23984 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
23985 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23986 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23987 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
23988 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
23989 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
23990 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
23991 is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B,
23992 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP,
23993 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
23994 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
23995 khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0,
23996 nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
23997 rmso=\E[m, rmul=\E[m, sc=\E7,
23998 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
23999 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
24000 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
24001 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index,
24003 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
24004 pc6300plus|AT&T 6300 plus,
24007 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
24008 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
24009 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
24010 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
24011 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
24012 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
24013 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
24014 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
24015 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24016 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
24018 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
24020 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
24021 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
24022 # is broken. All the special key sequences are broken, making it unusable
24023 # with Emacs. The problem stems from the following:
24025 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
24026 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
24027 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
24028 # uses resizable terminal windows, but the bundled terminal program always
24029 # uses an 80x24 window (and doesn't support seem to support a 132-column
24032 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
24033 # library which was a superset of SVr3.5 curses (called tam, for "terminal
24034 # access method".) tam includes support for real, overlapping windows,
24035 # onscreen function key labels, and bitmap graphics. But since the primary
24036 # user interface on the UNIX PC was a GUI program (ua, for "user
24037 # assistant",) and remote administration was considered important for the
24038 # machine, tam also supported VT100-compatible terminals attached to the
24039 # serial port or used across the StarLan network. To simulate the extra keys
24040 # not present on a VT100, users could press ESC and a two-letter sequence,
24041 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
24042 # however, were not the same as those sent by the actual Undo key. The
24043 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
24044 # (If you're interested in adding some of the tam calls to ncurses, btw, I
24045 # have the full documentation and several programs which use tam. It also
24046 # used an extended terminfo format to describe key sequences, special
24047 # highlighting modes, etc.)
24049 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
24050 # there are two sequences for every key-modifier combination (local keyboard
24051 # sequence and remote "VT100" sequence.) But I doubt many people are trying
24052 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
24053 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
24054 # seem to have been built from the manual describing the VT100 sequences.
24055 # This means it doesn't work for a real live UNIX PC.
24057 # FONTS: The UNIX PC also has a strange interpretation of "alternate
24058 # character set". Rather than the VT100 graphics you might expect, it allows
24059 # up to 8 custom fonts to be loaded at any given time. This means that
24060 # programs expecting VT100 graphics will usually be disappointed. For this
24061 # reason I have disabled the smacs/rmacs sequences, but they could easily be
24062 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
24063 # manpage), should you wish to do so:
24065 # SGR10 - Select font 0 - ESC [ 10 m or SO
24066 # SGR11 - Select font 1 - ESC [ 11 m or SI
24067 # SGR12 - Select font 2 - ESC [ 12 m
24069 # SGR17 - Select font 7 - ESC [ 17 m
24071 # Graphics for line drawing are not reliably found at *any* character
24072 # location because the UNIX PC has dynamically reloadable fonts. I use font
24073 # 0 for regular text and font 1 for italics, but this is by no means
24074 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
24076 # MISC: The cursor visible/cursor invisible sequences were swapped in the
24077 # distributed terminfo.
24079 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
24080 # the UNIX PC terminfo entry. The modified version works great with Lynx,
24081 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
24082 # attached by serial cable. In Emacs, even the Undo key works, and many
24083 # applications can now use the F1-F8 keys.
24086 # Terminfo entry for the AT&T Unix PC 7300
24087 # from escape(7) in Unix PC 7300 Manual.
24088 # Somewhat similar to a vt100-am (but different enough
24089 # to redo this from scratch.)
24091 # /***************************************************************
24093 # * FONT LOADING PROGRAM FOR THE UNIX PC
24095 # * This routine loads a font defined in the file ALTFONT
24096 # * into font memory slot #1. Once the font has been loaded,
24097 # * it can be used as an alternative character set.
24099 # * The call to ioctl with the argument WIOCLFONT is the key
24100 # * to this routine. For more information, see window(7) in
24101 # * the PC 7300 documentation.
24102 # ***************************************************************/
24103 # #include <string.h> /* needed for strcpy call */
24104 # #include <sys/window.h> /* needed for ioctl call */
24105 # #define FNSIZE 60 /* font name size */
24106 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
24108 # * The file /usr/lib/wfont/special.8.ft comes with the
24109 # * standard PC software. It defines a graphics character set
24110 # * similar to that of the Teletype 5425 terminal. To view
24111 # * this or other fonts in /usr/lib/wfont, use the command
24112 # * cfont <filename>. For further information on fonts see
24113 # * cfont(1) in the PC 7300 documentation.
24116 # struct altfdata /* structure for alt font data */
24118 # short altf_slot; /* memory slot number */
24119 # char altf_name[FNSIZE]; /* font name (file name) */
24123 # int wd; /* window in which altfont will be */
24124 # struct altfdata altf;
24125 # altf.altf_slot=1;
24126 # strcpy(altf.altf_name,ALTFONT);
24127 # for (wd =1; wd < 12; wd++) {
24128 # ioctl(wd, WIOCLFONT,&altf);
24132 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
24133 # they're confirmed by the man page for the System V display---esr)
24135 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
24137 cols#80, it#8, lines#24,
24138 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
24139 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
24140 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
24141 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
24142 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
24143 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
24144 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
24145 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
24146 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
24147 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
24148 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
24149 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
24150 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
24151 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
24152 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
24153 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
24154 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
24155 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
24156 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
24157 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
24158 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
24159 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
24162 #### Convergent Technology
24164 # Burroughs bought Convergent shortly before it merged with Univac.
24165 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
24166 # from 1991 or earlier).
24169 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
24170 # (aws: removed unknown :dn=^K: -- esr)
24171 aws|Convergent Technologies AWS workstation under UTX and Xenix,
24173 OTug#0, cols#80, lines#28, xmc#0,
24174 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
24175 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
24176 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
24177 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
24178 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
24179 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
24181 awsc|Convergent Technologies AWS workstation under CTOS,
24183 OTug#0, cols#80, lines#24, xmc#0,
24184 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
24185 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
24186 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
24187 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
24193 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
24194 # The digital uVax II's had a graphic display called a qdss. It was
24195 # supposed to be a high performance graphic accelerator, but it was
24196 # late to market and barely appeared before faster dumb frame buffers
24197 # appeared. I have only used this display while running X11. However,
24198 # during bootup, it was in text mode, and probably had a terminal emulator
24199 # within it. And that is what your termcap entry is for. In graphics
24200 # mode the screen size is 1024x864 pixels.
24201 qdss|qdcons|qdss glass tty,
24203 cols#128, lines#57,
24204 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
24205 cup=\E=%p1%c%p2%c, cuu1=^K,
24207 #### Fortune Systems consoles
24209 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
24210 # in their day; I (esr) used one myself for a year or so around 1984.
24211 # They had no graphics, though, and couldn't compete against Suns and
24215 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
24216 # (This had extension capabilities
24217 # :rv=\EH:re=\EI:rg=0:GG=0:\
24218 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
24219 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
24220 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
24221 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
24222 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
24223 # to force both magic cookie glitches off. Once upon a time, I
24224 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
24225 # function keys; thus the "Al" value for HM was certainly an error. I renamed
24226 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
24227 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
24228 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
24229 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
24230 fos|fortune|Fortune system,
24233 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
24234 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
24235 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
24236 cvvis=\E:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>,
24237 el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>,
24238 il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H, kcub1=^Aw\r,
24239 kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r,
24240 kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r,
24241 kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r,
24242 knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH, rmacs=^O, rmso=^\I`,
24243 rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP,
24245 #### Masscomp consoles
24247 # Masscomp has gone out of business. Their product line was purchased by a
24248 # company in Georgia (US) called "XS International", parts and service may
24249 # still be available through them.
24252 # (masscomp: ":MT:" changed to ":km:"; -- esr)
24253 masscomp|masscomp workstation console,
24255 cols#80, it#8, lines#24,
24256 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
24257 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24258 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
24259 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
24260 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
24261 masscomp1|masscomp large screen version 1,
24262 cols#104, lines#36, use=masscomp,
24263 masscomp2|masscomp large screen version 2,
24264 cols#64, lines#21, use=masscomp,
24269 # OSF/1 1.1 Snapshot 2
24270 pmcons|pmconsole|PMAX console,
24272 cols#128, lines#57,
24273 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
24274 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
24275 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
24277 #### Other consoles
24278 # The following is a version of the ibm-pc entry distributed with PC/IX,
24279 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
24280 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
24281 # (the former is untrue, and the latter failed under UCB/man); standout and
24282 # underline modes have been added. Note: this entry describes the "native"
24283 # capabilities of the PC monochrome display, without ANY emulation; most
24284 # communications packages (but NOT PC/IX connect) do some kind of emulation.
24285 pcix|PC/IX console,
24288 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
24289 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
24290 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
24293 # (ibmpcx: this entry used to be known as ibmx.
24294 # It formerly included the following extension capabilities:
24295 # :GC=b:GL=v:GR=t:RT=^J:\
24296 # :GH=\E[196g:GV=\E[179g:\
24297 # :GU=\E[193g:GD=\E[194g:\
24298 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
24299 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
24300 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
24301 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
24302 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
24303 # what was there before. -- esr)
24304 ibmpcx|xenix|ibmx|IBM PC xenix console display,
24307 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
24308 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24309 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
24310 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
24311 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
24312 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
24314 ######## OTHER OBSOLETE TYPES
24316 # These terminals are *long* dead -- these entries are retained for
24317 # historical interest only.
24320 #### Obsolete non-ANSI software emulations
24323 # CTRM terminal emulator
24324 # 1. underlining is not allowed with colors: first, is is simulated by
24325 # black on white, second, it disables background color manipulations.
24326 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
24327 # so we have to save their status in the static registers A, B and H
24328 # respectively, to be able to restore them when color changes
24329 # (because any color change turns off ALL attributes)
24330 # 3. <bold> and <rev> sequences alternate modes,
24331 # rather than simply entering them. Thus we have to check the
24332 # static register B and H to determine the status, before sending the
24334 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
24335 # and then reset colors
24336 # 5. implementation of the protect mode would badly penalize the performance.
24337 # we would have to use \E&bn sequence to turn off colors (as well as all
24338 # other attributes), and keep the status of protect mode in yet another
24339 # static variable. If someone really needs this mode, they would have to
24340 # create another terminfo entry.
24341 # 6. original color-pair is white on black.
24342 # store the information about colors into static registers
24343 # 7. set foreground color. it performs the following steps.
24344 # 1) turn off all attributes
24345 # 2) turn on the background and video attributes that have been turned
24346 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
24347 # 3) turn on foreground attributes
24348 # 4) store information about foreground into U,V,W static registers
24349 # 8. turn on background: similar to turn on foreground above
24350 ctrm|C terminal emulator,
24352 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
24353 pairs#63, pb#19200, vt#6,
24354 bel=^G, blink=\E&dA%{1}%PA,
24355 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
24356 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
24357 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
24358 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
24359 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
24360 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
24361 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
24362 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
24363 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
24365 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
24366 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
24367 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
24368 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
24369 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
24370 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
24371 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
24372 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
24373 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
24374 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
24375 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
24377 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
24378 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
24380 # gs6300 - can't use blue foreground, it clashes with underline;
24381 # it's simulated with cyan
24382 # Bug: The <op> capability probably resets attributes.
24383 # (gs6300: commented out <rmln> (no <smln>) --esr)
24384 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
24385 am, bce, msgr, xon,
24386 colors#8, cols#80, it#8, lines#24, pairs#63,
24387 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
24389 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
24390 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
24391 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
24392 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
24393 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
24394 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
24395 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
24396 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
24397 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
24398 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
24399 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
24400 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
24401 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
24403 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
24404 # MS-Kermit with Heath-19 emulation mode enabled
24405 # (h19k: changed ":pt@:" to ":it@"
24406 h19k|h19kermit|Heathkit emulation provided by Kermit (no auto margin),
24411 # Apple Macintosh with VersaTerm, a terminal emulator distributed by Synergy
24412 # Software (formerly Peripherals Computers & Supplies, Inc) of
24413 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
24414 # also be reached at support@synergy.com.
24415 versaterm|VersaTerm VT100 emulator for the Macintosh,
24417 cols#80, it#8, lines#24,
24418 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
24419 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
24420 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
24421 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
24422 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
24423 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
24424 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
24425 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
24426 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
24427 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
24428 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
24429 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
24432 # From: Rick Thomas <ihnp4!btlunix!rbt>
24433 # (xtalk: I added <rmam>/<smam> based on the init string.
24434 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
24435 am, mir, msgr, xon,
24436 cols#80, it#8, lines#24, vt#3, xmc#1,
24437 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
24438 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
24439 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
24440 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
24441 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
24442 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
24443 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
24444 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
24445 rmkx=\E[?1l\E>, rmso=\E[m\s,
24446 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
24447 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
24448 tbc=\E[3g, use=vt100+fnkeys,
24450 # The official PC terminal emulator program of the AT&T Product Centers.
24451 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
24452 simterm|attpc running simterm,
24455 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
24456 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
24457 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
24458 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
24460 #### Daisy wheel printers
24462 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
24463 # wheel terminals. These are now largely obsolete.
24466 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
24467 diablo1620|diablo1720|diablo450|ipsi|Diablo 1620,
24470 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
24471 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
24472 diablo1620-m8|diablo1640-m8|Diablo 1620 w/8 column left margin,
24474 is2=\r \E9, use=diablo1620,
24475 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
24476 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|Diablo 1640,
24477 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
24479 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
24481 diablo1640-lm|diablo-lm|xerox-lm|Diablo 1640 with indented left margin,
24483 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
24484 diablo1740-lm|630-lm|1730-lm|x1700-lm|Diablo 1740 printer,
24486 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
24487 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
24488 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
24489 # If no tab is set or the terminal's in a bad mood, it glitches the screen
24490 # around all of memory. Note that return puts a blank ("a return character")
24491 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
24492 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
24493 # curses won't work (some old BSD versions) because it doesn't clear this bit,
24494 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
24495 # I have been unable to get tabs set in all 96 lines - it always leaves at
24496 # least one line with no tabs in it, and once you tab through that line,
24497 # it completely weirds out.
24498 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
24501 cols#80, lines#24, lm#96,
24502 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
24503 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
24504 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
24505 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
24506 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
24510 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24511 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24512 gsi|mystery gsi terminal,
24515 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
24517 aj830|aj832|aj|Anderson Jacobson,
24519 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
24521 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
24522 aj510|Anderson-Jacobson model 510,
24525 clear=^L, cub1=^H, cuf1=\EX,
24526 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
24527 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
24528 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
24529 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
24530 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
24532 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
24533 # This is incomplete, but it's a start.
24534 nec5520|nec|spinwriter|NEC 5520,
24537 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
24538 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
24540 qume5|qume|Qume Sprint 5,
24543 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
24544 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
24545 # I suspect the Xerox 1720 is the same as the Diablo 1620.
24546 xerox1720|x1720|x1750|Xerox 1720,
24549 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
24552 #### Miscellaneous obsolete terminals, manufacturers unknown
24554 # If you have any information about these (like, a manufacturer's name,
24555 # and a date on the serial-number plate) please send it!
24557 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
24560 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
24561 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
24564 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
24565 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
24566 kf4=\E8, rmso=\Em^C, smso=\Em^L,
24567 cops10|cops|cops-10|cops 10,
24570 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
24571 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
24572 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
24575 # http://www.bitsavers.org/pdf/datapro/alphanumeric_terminals/Datapro_C25_Datagraphix.pdf
24577 # DatagraphiX, Inc.
24578 # (a subsidiary of General Dynamics),
24579 # P.O. Box 82449, San Diego, California 92138.
24581 # (d132: removed duplicate :ic=\E5:,
24582 # merged in capabilities from a BRL entry -- esr)
24583 d132|datagraphix|DatagraphiX 132a,
24586 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
24587 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
24588 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
24589 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
24590 # The d800 was an early portable terminal from c.1984-85 that looked a lot
24591 # like the original Compaq `lunchbox' portable (but no handle). It had a VT220
24592 # mode (which is what this entry looks like) and several other lesser-known
24595 OTbs, am, da, db, msgr, xhp,
24596 cols#80, it#8, lines#24,
24597 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
24598 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
24599 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
24600 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
24601 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
24602 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
24603 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24604 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
24605 digilog|digilog 333,
24608 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
24610 # The DWK was a terminal manufactured in the Soviet Union c.1986
24611 dwk|dwk-vt|dwk terminal,
24613 cols#80, it#8, lines#24,
24614 acsc=+\^\,Q-S.M0\177`+a:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~
24616 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
24617 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
24618 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
24619 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
24620 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
24621 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
24622 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
24623 sgr0=\EX, smacs=\EF, smso=\ET,
24624 env230|envision230|envision 230 graphics terminal,
24626 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
24627 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
24629 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
24630 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
24631 # coupler attached, the whole rig fitting in a suitcase and more or less
24632 # portable. Hot stuff for c.1977 :-) -- esr
24633 ep48|ep4080|execuport 4080,
24636 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
24637 ep40|ep4000|execuport 4000,
24638 cols#136, use=ep4080,
24639 # Adam Thompson <athompso@pangea.ca> tells us:
24640 # Informer series - these are all portable units, resembling older
24641 # automatic bread-baking machines. The terminal looks like a `clamshell'
24642 # design, but isn't. The structure is similar to the Direct terminals,
24643 # but only half the width. The entire unit is only about 10" wide.
24644 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
24645 # keyboard. All the keys are crammed together, much like some laptop
24646 # PCs today, but perhaps less well organized...all these units have a
24647 # bewildering array of plugs on the back, including a built-in modem.
24648 # The 305 was a color version of the 304; the 306 and 307 were mono and
24649 # color terminals built for IBM bisync protocols.
24650 # From: Paul Leondis <unllab@amber.berkeley.edu>
24651 ifmr|Informer D304,
24654 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
24655 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
24656 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
24658 # Entry largely based on wy60 and has the features of wy60ak.
24659 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
24660 am, bw, hs, km, mir, msgr, ul, xon,
24661 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
24662 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
24663 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
24664 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
24665 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
24666 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
24667 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
24669 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
24670 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
24672 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
24673 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
24674 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
24675 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
24676 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
24677 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
24678 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
24679 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
24680 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
24681 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
24682 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
24683 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
24684 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
24685 rs3=\EwG\Ee($<150>,
24686 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
24687 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
24688 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
24689 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
24690 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
24692 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
24693 uc=\EG8\EG0, use=adm+sgr,
24694 teletec|Teletec Datascreen,
24697 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
24699 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
24700 # This description is for the LANPAR Technologies VISION 3220
24701 # terminal from 1984/85. The function key definitions k0-k5 represent the
24702 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
24703 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
24705 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
24706 # I had a couple of scopes (3221) like this once where I used to work, around
24707 # the 1987 time frame if memory serves me correctly. These scopes were made
24708 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
24709 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
24710 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
24711 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
24712 # (3221) cost about $1500 each, and one was always broken -- had to be sent
24713 # back to the shop for repairs.
24714 # The only real advantage these scopes had over the VT-240's were:
24715 # 1) They were faster in the Regis display, or at least the ones I did
24716 # 2) They had a handy debugging feature where you could split-screen the
24717 # scope, the graphics would appear on the top, and the REGIS commands would
24718 # appear on the bottom. I don't remember the VT-240s being able to do that.
24719 # I would swear that LANPAR Technologies was in MA someplace, but since I
24720 # don't work at the same place anymore, and those terminals and manuals were
24721 # long since junked, I cannot be any more sure than that.
24723 # (v3220: removed obsolete ":kn#10:",
24724 # I added <rmam>/<smam> based on the init string -- esr)
24725 v3220|LANPAR Vision II model 3220/3221/3222,
24726 OTbs, am, mir, xenl,
24727 cols#80, it#8, lines#24,
24728 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
24729 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
24730 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
24731 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
24732 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
24733 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
24734 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
24735 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
24736 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
24737 ######## ICH/ICH1 VERSUS RMIR/SMIR
24739 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
24740 # are present; the symptom is doubled characters in an update using insert.
24741 # These applications are technically correct; in both 4.3BSD termcap and
24742 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
24743 # unless the terminal needs both. To my knowledge, no terminal still in this
24744 # file requires both other than the very obsolete dm2500.
24746 # For ncurses-based applications this is not a problem, as ncurses uses
24747 # one or the other as appropriate but never mixes the two. Therefore we
24748 # have not corrected entries like `linux' and `xterm' that specify both.
24749 # If you see doubled characters from these, use the linux-nic and xterm-nic
24750 # entries that suppress ich/ich1. And upgrade to ncurses!
24753 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
24755 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
24756 # ECMA-48 standards are said to be almost identical, but are not the same
24757 # as X3.64 (though for practical purposes they are close supersets of it).
24759 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
24760 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
24761 # Coded Character Sets"), include your snail-mail address, and you should
24762 # receive the document in due course. Don't expect an email acknowledgment.
24764 # Related standards include "X3.4-1977: American National Standard Code for
24765 # Information Interchange" (the ASCII standard) and "X3.41.1974:
24766 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
24767 # American National Standard for Information Interchange." I believe (but
24768 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
24772 #### VT100/ANSI/ECMA-48
24774 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
24775 # and ECMA-48 Control Functions for Coded Character Sets.
24777 # Much of the content of this comment is adapted from a table prepared by
24778 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
24779 # discussion of some terminfo-related issues, and updates to capture ECMA-48
24780 # have been added. Control functions described in ECMA-48 only are tagged
24781 # with * after their names.
24783 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
24784 # sequences. In the main table, \E stands for an escape (\033) character,
24785 # SPC for space. Pn stands for a single numeric parameter to be inserted
24786 # in decimal ASCII. Ps stands for a list of such parameters separated by
24787 # semicolons. Parameter meanings for most parameterized sequences are
24788 # described in the notes.
24790 # Sequence Sequence Parameter or
24791 # Mnemonic Name Sequence Value Mode terminfo
24792 # -----------------------------------------------------------------------------
24793 # APC Applicatn Program Command \E _ - Delim -
24794 # BEL Bell * ^G - - bel
24795 # BPH Break Permitted Here * \E B - * -
24796 # BS BackSpace * ^H - EF -
24797 # CAN Cancel * ^X - - - (A)
24798 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
24799 # CCH Cancel Previous Character \E T - - -
24800 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
24801 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
24802 # CMD Coding Method Delimiter * \E
24803 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
24804 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
24805 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
24806 # CSI Control Sequence Intro \E [ - Intro -
24807 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
24808 # CUB Cursor Backward \E [ Pn D 1 eF cub
24809 # CUD Cursor Down \E [ Pn B 1 eF cud
24810 # CUF Cursor Forward \E [ Pn C 1 eF cuf
24811 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
24812 # CUU Cursor Up \E [ Pn A 1 eF cuu
24813 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
24814 # DA Device Attributes \E [ Pn c 0 - -
24815 # DAQ Define Area Qualification \E [ Ps o 0 - -
24816 # DCH Delete Character \E [ Pn P 1 eF dch
24817 # DCS Device Control String \E P - Delim -
24818 # DL Delete Line \E [ Pn M 1 eF dl
24819 # DLE Data Link Escape * ^P - - -
24820 # DMI Disable Manual Input \E \ - Fs -
24821 # DSR Device Status Report \E [ Ps n 0 - - (I)
24822 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
24823 # EA Erase in Area \E [ Ps O 0 eF - (J)
24824 # ECH Erase Character \E [ Pn X 1 eF ech
24825 # ED Erase in Display \E [ Ps J 0 eF ed (J)
24826 # EF Erase in Field \E [ Ps N 0 eF -
24827 # EL Erase in Line \E [ Ps K 0 eF el (J)
24828 # EM End of Medium * ^Y - - -
24829 # EMI Enable Manual Input \E b Fs -
24830 # ENQ Enquire ^E - - -
24831 # EOT End Of Transmission ^D - * -
24832 # EPA End of Protected Area \E W - - - (K)
24833 # ESA End of Selected Area \E G - - -
24834 # ESC Escape ^[ - - -
24835 # ETB End Transmission Block ^W - - -
24836 # ETX End of Text ^C - - -
24837 # FF Form Feed ^L - - -
24838 # FNK Function Key * \E [ Pn SPC W - - -
24839 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
24840 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
24841 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
24842 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
24843 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
24844 # HPB Char Position Backward \E [ j 1 FE -
24845 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
24846 # HT Horizontal Tab * ^I - FE - (N)
24847 # HTJ Horz Tab w/Justification \E I - FE -
24848 # HTS Horizontal Tab Set \E H - FE hts
24849 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
24850 # ICH Insert Character \E [ Pn @ 1 eF ich
24851 # IDCS ID Device Control String \E [ SPC O - * -
24852 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
24853 # IL Insert Line \E [ Pn L 1 eF il
24854 # IND Index \E D - FE -
24855 # INT Interrupt \E a - Fs -
24856 # JFY Justify \E [ Ps SPC F 0 FE -
24857 # IS1 Info Separator #1 * ^_ - * -
24858 # IS2 Info Separator #1 * ^^ - * -
24859 # IS3 Info Separator #1 * ^] - * -
24860 # IS4 Info Separator #1 * ^\ - * -
24861 # LF Line Feed ^J - - -
24862 # LS1R Locking Shift Right 1 * \E ~ - - -
24863 # LS2 Locking Shift 2 * \E n - - -
24864 # LS2R Locking Shift Right 2 * \E } - - -
24865 # LS3 Locking Shift 3 * \E o - - -
24866 # LS3R Locking Shift Right 3 * \E | - - -
24867 # MC Media Copy \E [ Ps i 0 - - (S)
24868 # MW Message Waiting \E U - - -
24869 # NAK Negative Acknowledge * ^U - * -
24870 # NBH No Break Here * \E C - - -
24871 # NEL Next Line \E E - FE nel (D)
24872 # NP Next Page \E [ Pn U 1 eF -
24873 # NUL Null * ^@ - - -
24874 # OSC Operating System Command \E ] - Delim -
24875 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
24876 # PFS Page Format Selection * \E Pn SPC J 0 - -
24877 # PLD Partial Line Down \E K - FE - (T)
24878 # PLU Partial Line Up \E L - FE - (U)
24879 # PM Privacy Message \E ^ - Delim -
24880 # PP Preceding Page \E [ Pn V 1 eF -
24881 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
24882 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
24883 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
24884 # PTX Parallel Texts * \E [ \ - - -
24885 # PU1 Private Use 1 \E Q - - -
24886 # PU2 Private Use 2 \E R - - -
24887 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
24888 # REP Repeat Char or Control \E [ Pn b 1 - rep
24889 # RI Reverse Index \E M - FE - (V)
24890 # RIS Reset to Initial State \E c - Fs -
24891 # RM Reset Mode * \E [ Ps l - - - (W)
24892 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
24893 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
24894 # SCI Single-Char Introducer \E Z - - -
24895 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
24896 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
24897 # SD Scroll Down \E [ Pn T 1 eF rin
24898 # SDS Start Directed String * \E [ Pn ] 1 - -
24899 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
24900 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
24901 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
24902 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
24903 # SI Shift In ^O - - - (P)
24904 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
24905 # SL Scroll Left \E [ Pn SPC @ 1 eF -
24906 # SLH Set Line Home * \E [ Pn SPC U - - -
24907 # SLL Set Line Limit * \E [ Pn SPC V - - -
24908 # SLS Set Line Spacing * \E [ Pn SPC h - - -
24909 # SM Select Mode \E [ Ps h none - - (W)
24910 # SO Shift Out ^N - - - (Q)
24911 # SOH Start Of Heading * ^A - - -
24912 # SOS Start of String * \E X - - -
24913 # SPA Start of Protected Area \E V - - - (Z)
24914 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
24915 # SPH Set Page Home * \E [ Ps SPC G - - -
24916 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
24917 # SPL Set Page Limit * \E [ Ps SPC j - - -
24918 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
24919 # SR Scroll Right \E [ Pn SPC A 1 eF -
24920 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
24921 # SRS Start Reversed String * \E [ Ps [ 0 - -
24922 # SSA Start of Selected Area \E F - - -
24923 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
24924 # SSW Set Space Width * \E [ Pn SPC [ none - -
24925 # SS2 Single Shift 2 (G2 set) \E N - Intro -
24926 # SS3 Single Shift 3 (G3 set) \E O - Intro -
24927 # ST String Terminator \E \ - Delim -
24928 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
24929 # STS Set Transmit State \E S - - -
24930 # STX Start pf Text * ^B - - -
24931 # SU Scroll Up \E [ Pn S 1 eF indn
24932 # SUB Substitute * ^Z - - -
24933 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
24934 # SYN Synchronous Idle * ^F - - -
24935 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
24936 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
24937 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
24938 # TBC Tab Clear \E [ Ps g 0 FE tbc
24939 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
24940 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
24941 # TSS Thin Space Specification \E [ Pn SC E none FE -
24942 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
24943 # VPB Line Position Backward * \E [ Pn k 1 FE -
24944 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
24945 # VT Vertical Tabulation * ^K - FE -
24946 # VTS Vertical Tabulation Set \E J - FE -
24948 # ---------------------------------------------------------------------------
24952 # Some control characters are listed in the ECMA-48 standard without
24953 # being assigned functions relevant to terminal control there (they
24954 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
24955 # here anyway for completeness.
24957 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
24959 # (B) There seems to be some confusion abroad between CHA and HPA. Most
24960 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
24961 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
24962 # preserved the CHA abbreviation.
24964 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
24965 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
24966 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
24967 # CHT abbreviation.
24969 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
24971 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
24974 # (F) CTC parameter values:
24975 # 0 = set char tab,
24976 # 1 = set line tab,
24977 # 2 = clear char tab,
24978 # 3 = clear line tab,
24979 # 4 = clear all char tabs on current line,
24980 # 5 = clear all char tabs,
24981 # 6 = clear all line tabs.
24983 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
24984 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
24985 # Position Absolute" but retains the HVP abbreviation.
24987 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
24990 # (I) DSR parameter values:
24993 # 2 = busy, will send DSR later,
24995 # 4 = malfunction, will send DSR later,
24997 # 6 = request CPR response.
24999 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
25000 # 0 = clear to end,
25001 # 1 = clear from beginning,
25004 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
25006 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
25008 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
25009 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
25010 # Position Relative" but retains the HPR abbreviation.
25012 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
25015 # (O) SGR parameter values:
25016 # 0 = default mode (attributes off),
25023 # 7 = reverse video,
25025 # 9 = crossed-out (marked for deletion),
25026 # 10 = primary font,
25027 # 10 + n (n in 1..9) = nth alternative font,
25029 # 21 = double underline,
25034 # 26 = proportional spacing,
25046 # 38 = set fg color as in CCITT T.416,
25047 # 39 = set default fg color,
25056 # 48 = set bg color as in CCITT T.416,
25057 # 49 = set default bg color,
25058 # 50 = turn off 26,
25062 # 54 = turn off 51 & 52,
25063 # 55 = not overlined,
25064 # 56-59 = reserved,
25065 # 61-65 = variable highlights for ideograms.
25067 # (P) SI is also called LSO, Locking Shift Zero.
25069 # (Q) SI is also called LS1, Locking Shift One.
25071 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
25072 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
25073 # Absolute' but retains the VPA abbreviation.
25075 # (S) MC parameters:
25076 # 0 = start xfer to primary aux device,
25077 # 1 = start xfer from primary aux device,
25078 # 2 = start xfer to secondary aux device,
25079 # 3 = start xfer from secondary aux device,
25080 # 4 = stop relay to primary aux device,
25081 # 5 = start relay to primary aux device,
25082 # 6 = stop relay to secondary aux device,
25083 # 7 = start relay to secondary aux device.
25085 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
25088 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
25091 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
25093 # (W) RM/SM modes are as follows:
25094 # 1 = Guarded Area Transfer Mode (GATM),
25095 # 2 = Keyboard Action Mode (KAM),
25096 # 3 = Control Representation Mode (CRM),
25097 # 4 = Insertion Replacement Mode (IRM),
25098 # 5 = Status Report Transfer Mode (SRTM),
25099 # 6 = Erasure Mode (ERM),
25100 # 7 = Line Editing Mode (LEM),
25101 # 8 = Bi-Directional Support Mode (BDSM),
25102 # 9 = Device Component Select Mode (DCSM),
25103 # 10 = Character Editing Mode (HEM),
25104 # 11 = Positioning Unit Mode (PUM),
25105 # 12 = Send/Receive Mode (SRM),
25106 # 13 = Format Effector Action Mode (FEAM),
25107 # 14 = Format Effector Transfer Mode (FETM),
25108 # 15 = Multiple Area Transfer Mode (MATM),
25109 # 16 = Transfer Termination Mode (TTM),
25110 # 17 = Selected Area Transfer Mode (SATM),
25111 # 18 = Tabulation Stop Mode (TSM),
25112 # 19 = Editing Boundary Mode (EBM),
25113 # 20 = Line Feed New Line Mode (LF/NL),
25114 # 21 = Graphic Rendition Combination Mode (GRCM),
25115 # 22 = Zero Default Mode (ZDM).
25117 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
25118 # but are listed here for reference.
25120 # (X) Select Alternate Presentation Variants is used only for non-Latin
25123 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
25125 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
25128 # ---------------------------------------------------------------------------
25132 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
25133 # X3.64 Control Sequence Introducer is the two characters "Escape ["
25135 # Delim a Delimiter
25137 # x/y identifies a character by position in the ASCII table (column/row)
25139 # eF editor function (see explanation)
25141 # FE format effector (see explanation)
25143 # F is a Final character in
25144 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
25145 # a control sequence (F from 4/0 to 7/14)
25147 # Gs is a graphic character appearing in strings (Gs ranges from
25148 # 2/0 to 7/14) in the ASCII table
25150 # Ce is a control represented as a single bit combination in the C1 set
25151 # of controls in an 8-bit character set
25153 # C0 the familiar set of 7-bit ASCII control characters
25155 # C1 roughly, the set of control chars available only in 8-bit systems.
25156 # This is too complicated to explain fully here, so read Jim Fleming's
25157 # article in the February 1983 BYTE, especially pages 214 through 224.
25159 # Fe is a Final character of a 2-character Escape sequence that has an
25160 # equivalent representation in an 8-bit environment as a Ce-type
25161 # (Fe ranges from 4/0 to 5/15)
25163 # Fs is a Final character of a 2-character Escape sequence that is
25164 # standardized internationally with identical representation in 7-bit
25165 # and 8-bit environments and is independent of the currently
25166 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
25168 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
25171 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
25174 # Pn is a numeric parameter in a control sequence, a string of zero or
25175 # more characters ranging from 3/0 to 3/9 in the ASCII table
25177 # Ps is a variable number of selective parameters in a control sequence
25178 # with each selective parameter separated from the other by the code
25179 # 3/11 (which usually represents a semicolon); Ps ranges from
25180 # 3/0 to 3/9 and includes 3/11
25182 # * Not relevant to terminal control, listed for completeness only.
25184 # Format Effectors versus Editor Functions
25186 # A format effector specifies how following output is to be displayed.
25187 # An editor function allows you to modify the display. Informally
25188 # format effectors may be destructive; format effectors should not be.
25190 # For instance, a format effector that moves the "active position" (the
25191 # cursor or equivalent) one space to the left would be useful when you want to
25192 # create an overstrike, a compound character made of two standard characters
25193 # overlaid. Control-H, the Backspace character, is actually supposed to be a
25194 # format effector, so you can do this. But many systems use it in a
25195 # nonstandard fashion, as an editor function, deleting the character to the
25196 # left of the cursor and moving the cursor left. When Control-H is assumed to
25197 # be an editor function, you cannot predict whether its use will create an
25198 # overstrike unless you also know whether the output device is in an "insert
25199 # mode" or an "overwrite mode". When Control-H is used as a format effector,
25200 # its effect can always be predicted. The familiar characters carriage
25201 # return, linefeed, formfeed, etc., are defined as format effectors.
25203 # NOTES ON THE DEC VT100 IMPLEMENTATION
25205 # Control sequences implemented in the VT100 are as follows:
25207 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
25208 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
25210 # plus several private DEC commands.
25212 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
25214 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
25215 # Erase from beginning of line to cursor Esc [ 1 K
25216 # Erase line containing cursor Esc [ 2 K
25217 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
25218 # Erase from beginning of screen to cursor Esc [ 1 J
25219 # Erase entire screen Esc [ 2 J
25221 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
25222 # Esc [ 2 J, but this is wrong; the default is 0.
25224 # The VT100 responds to receiving the DA (Device Attributes) control
25226 # Esc [ c (or Esc [ 0 c)
25228 # by transmitting the sequence
25232 # where Ps is a character that describes installed options.
25234 # The VT100's cursor location can be read with the DSR (Device Status
25239 # The VT100 reports by transmitting the CPR sequence
25243 # where Pl is the line number and Pc is the column number (in decimal).
25245 # The specification for the DEC VT100 is document EK-VT100-UG-003.
25249 # Here is a description of the color and attribute controls supported in the
25250 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
25251 # terminal emulators for Intel boxes obey these. They are a proper subset
25252 # of the ECMA-48 escapes.
25254 # 0 all attributes off
25255 # 1 foreground bright
25257 # 5 blink on/background bright (not reliable with brown)
25259 # 8 set blank (non-display)
25260 # 10 set primary font
25261 # 11 set first alternate font (on PCs, display ROM characters 1-31)
25262 # 12 set second alternate font (on PCs, display IBM high-half chars)
25264 # Color attribute sets
25265 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
25266 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
25267 # Bright black becomes gray. Bright brown becomes yellow,
25268 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
25270 # * If the 5 attribute is on and you set a background color (40-47) it is
25271 # supposed to enable bright background.
25273 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
25274 # when you try to set a "bright brown" (yellow) background with attribute
25275 # 5 (you get a blinking yellow foreground instead). A few displays
25276 # (including the System V console) support an attribute 6 that undoes this
25277 # braindamage (this is required by iBCS2).
25279 # * Some older versions of ANSI.SYS have a bug that causes them to require
25280 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
25283 #### Intel Binary Compatibility Standard
25285 # For comparison, here are the capabilities implied by the Intel Binary
25286 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
25287 # These recommendations are optional. IBCS2 allows the leading escape to
25288 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
25289 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
25290 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
25291 # terminfo entry are followed with the corresponding capability in parens:
25293 # CSI <n>k disable (n=0) or enable (n=1) keyclick
25294 # CSI 2h lock keyboard
25295 # CSI 2i send screen as input
25296 # CSI 2l unlock keyboard
25297 # CSI 6m enable background color intensity
25298 # CSI <0-2>c reserved
25299 # CSI <0-59>m select graphic rendition
25300 # CSI <n>;<m>H (cup) cursor to line n and column m
25301 # CSI <n>;<m>f cursor to line n and column m
25302 # CSI <n>@ (ich) insert characters
25303 # CSI <n>A (cuu) cursor up n lines
25304 # CSI <n>B (cud) cursor down n lines
25305 # CSI <n>C (cuu) cursor right n characters
25306 # CSI <n>D (cud) cursor left n characters
25307 # CSI <n>E cursor down n lines and in first column
25308 # CSI <n>F cursor up n lines and in first column
25309 # CSI <n>G (hpa) position cursor at column n-1
25310 # CSI <n>J (ed) erase in display
25311 # CSI <n>K (el) erase in line
25312 # CSI <n>L (il) insert line(s)
25313 # CSI <n>P (dch) delete characters
25314 # CSI <n>S (indn) scroll up n lines
25315 # CSI <n>T (rin) scroll down n lines
25316 # CSI <n>X (ech) erase characters
25317 # CSI <n>Z (cbt) back up n tab stops
25318 # CSI <n>` cursor to column n on line
25319 # CSI <n>a (cuu) cursor right n characters
25320 # CSI <n>d (vpa) cursor to line n
25321 # CSI <n>e cursor down n lines and in first column
25322 # CSI <n>g (cbt) clear all tabs
25323 # CSI <n>z make virtual terminal n active
25324 # CSI ?7h (smam) turn automargin on
25325 # CSI ?7l (rmam) turn automargin off
25326 # CSI s save cursor position
25327 # CSI u restore cursor position to saved value
25328 # CSI =<c>A set overscan color
25329 # CSI =<c>F set normal foreground color
25330 # CSI =<c>G set normal background color
25331 # CSI =<c>H set reverse foreground color
25332 # CSI =<c>I set reverse foreground color
25333 # CSI =<c>J set graphic foreground color
25334 # CSI =<c>K set graphic foreground color
25335 # CSI =<n>g (dispc) display n from alternate graphics character set
25336 # CSI =<p>;<d>B set bell parameters
25337 # CSI =<s>;<e>C set cursor parameters
25338 # CSI =<x>D enable/disable intensity of background color
25339 # CSI =<x>E set/clear blink vs. bold background
25340 # CSI 7 (sc) (sc) save cursor position
25341 # CSI 8 (rc) (rc) restore cursor position to saved value
25342 # CSI H (hts) (hts) set tab stop
25343 # CSI Q<n><string> define function key string
25344 # (string must begin and end with delimiter char)
25345 # CSI c (clear) clear screen
25347 # The lack of any specification for attributes in SGR (among other things)
25348 # makes this a wretchedly weak standard. The table above is literally
25349 # everything iBSC2 has to say about terminal escape sequences; there is
25350 # no further discussion of their meaning or how to set the parameters
25351 # in these sequences at all.
25354 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
25356 # The historical termcap file entries were written primarily in 4.4BSD termcap.
25357 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
25358 # with the extension names chosen for compatibility with the termcap names
25359 # assigned in System V terminfo. There are some variant extension sets out
25360 # there. We try to describe them here.
25362 #### XENIX extensions:
25364 # The XENIX extensions include a set of function-key capabilities as follows:
25366 # code XENIX variable name terminfo name name clashes?
25367 # ---- ------------------- ------------- -----------------------
25369 # CR key_char_right
25370 # CW key_change_window create_window
25372 # HM key_home khome
25374 # LD key_delete_line kdl1
25375 # LF key_linefeed label_off
25376 # NU key_next_unlocked_cell
25377 # PD key_page_down knp
25379 # PN start_print mc5
25381 # PS stop_print mc4
25382 # PU key_page_up kpp pulse
25383 # RC key_recalc remove_clock
25384 # RF key_toggle_ref req_for_input
25385 # RT key_return kent
25386 # UP key_up_arrow kcuu1 parm_up_cursor
25388 # WR key_word_right
25390 # The XENIX extensions also include the following character-set and highlight
25393 # XENIX terminfo function
25394 # ----- -------- ------------------------------
25395 # GS smacs start alternate character set
25396 # GE rmacs end alternate character set
25397 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
25398 # bo blink begin blink (not used in /etc/termcap)
25399 # be end blink (not used in /etc/termcap)
25400 # bb blink glitch (not used in /etc/termcap)
25401 # it dim begin dim (not used in /etc/termcap)
25402 # ie end dim (not used in /etc/termcap)
25403 # ig dim glitch (not used in /etc/termcap)
25405 # Finally, XENIX also used the following forms-drawing capabilities:
25407 # single double type ASCII approximation
25408 # ------ ------ ------------- -------------------
25409 # GV Gv vertical line |
25410 # GH Gv horizontal line - _
25411 # G1 G5 top right corner _ |
25412 # G2 G6 top left corner |
25413 # G3 G7 bottom left corner |_
25414 # G4 G8 bottom right corner _|
25415 # GD Gd down-tick character T
25416 # GL Gl left-tick character -|
25417 # GR Gr right-tick character |-
25418 # GC Gc middle intersection -|-
25419 # GU Gu up-tick character _|_
25421 # These were invented to take advantage of the IBM PC ROM character set. One
25422 # can compose an acsc string from the single-width characters as follows
25423 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
25424 # When translating a termcap file, ncurses tic will do this automatically.
25425 # The double forms characters don't fit the SVr4 terminfo model.
25427 #### AT&T Extensions:
25429 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
25430 # nonstandard capabilities. Its signature is the KM capability, used to name
25431 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
25432 # set. Comments in the original, and a little cross-checking with other AT&T
25433 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
25434 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
25435 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
25436 # cursor invisible), and CV=:ve: (make cursor normal).
25440 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
25441 # have the System V capabilities up to SVr1 level. After that, it supports
25442 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
25443 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
25444 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
25445 # HP binary format incompatible with SVr4's.
25447 #### IBM Extensions
25449 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
25450 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
25451 # capabilities following prtr_non with the following special capabilities:
25452 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
25453 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
25454 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
25455 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
25456 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
25457 # renamed (to kcbt and kslt). The places in the box[12] capabilities
25458 # correspond to acsc chars, here is the mapping:
25460 # box1[0] = ACS_ULCORNER
25461 # box1[1] = ACS_HLINE
25462 # box1[2] = ACS_URCORNER
25463 # box1[3] = ACS_VLINE
25464 # box1[4] = ACS_LRCORNER
25465 # box1[5] = ACS_LLCORNER
25466 # box1[6] = ACS_TTEE
25467 # box1[7] = ACS_RTEE
25468 # box1[8] = ACS_BTEE
25469 # box1[9] = ACS_LTEE
25470 # box1[10] = ACS_PLUS
25472 # The box2 characters are the double-line versions of these forms graphics.
25473 # The AIX binary terminfo format is incompatible with SVr4's.
25475 #### Iris console extensions:
25477 # HS is half-intensity start; HE is half-intensity end
25478 # CT is color terminal type (for Curses & rogue)
25479 # CP is color change escape sequence
25480 # CZ are color names (for Curses & rogue)
25482 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
25484 #### TC Extensions:
25486 # There is a set of extended termcaps associated with something
25487 # called the "Terminal Control" or TC package created by MainStream Systems,
25488 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
25489 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
25490 # that flags color terminals.
25492 ######## NCURSES USER-DEFINABLE CAPABILITIES
25494 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
25495 # infocmp to manipulate user-definable capabilities. Those that are intended
25496 # for use in either terminfo or termcap use 2-character names. Extended
25497 # function keys do not use 2-character names, and are available only with
25500 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
25501 # tic/infocmp, and uses this database (with a few changes). There are a few
25502 # differences, noted in
25503 # https://invisible-island.net/ncurses/ncurses-netbsd.html
25505 # ncurses makes explicit checks for a few user-definable capabilities: AX, E3,
25506 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
25508 #### SCREEN Extensions:
25510 # The screen program uses the termcap interface. It recognizes a few useful
25511 # nonstandard capabilities. Those are used in this file.
25513 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
25515 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
25516 # E0 (str) Switch charset 'G0' back to standard charset.
25517 # S0 (str) Switch charset 'G0' to the specified charset.
25518 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
25521 # AX is relatively straightforward; it is interpreted by ncurses to say that
25522 # SGR 39/49 reset the terminal's foreground and background colors to their
25525 # XT is harder, since screen's manpage does not give more details. For that,
25526 # we must read screen's source-code. For example, when XT is set, screen
25529 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
25530 # screen may also set the terminal's name, which is (for xterm) distinct
25531 # from the icon name.
25532 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
25533 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
25534 # this is an rxvt feature.
25535 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
25536 # These are from xterm, although xterm accepts mouse codes that may not be
25537 # recognized by screen, e.g., 1005, 1006.
25538 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
25539 # sequence. However, because screen uses only termcap, the values returned
25540 # by Af/Ab are not usable because they rely on expressions that termcap
25541 # does not support. Therefore, screen uses a hardcoded string to work
25542 # around the limitation. In a few cases, screen also uses tparm, which
25543 # is a terminfo function rather than termcap.
25544 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
25545 # g) screen also uses the feature to decide whether to pay attention to other
25546 # xterm-related features which are unrelated to the description in the
25549 # Since XT is useful only when the outer terminal matches screen's assumptions,
25550 # it is appropriate to use it in the derived terminal descriptions such as
25551 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
25553 # The other ISO-2022 features are rarely used, but provided here to make
25554 # screen's termcap features available.
25556 #### XTERM Extensions:
25558 # For a discussion of "xterm", "xterm-256color" as values for TERM, see
25559 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_generic
25560 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_256color
25562 # For xterm control sequences, see
25563 # https://invisible-island.net/xterm/ctlseqs/ctlseqs.html
25565 # For function-keys with modifiers, see
25566 # https://invisible-island.net/ncurses/ncurses.faq.html#modified_keys
25568 # For a discussion of "bracketed paste", see
25569 # https://invisible-island.net/xterm/xterm-paste64.html
25571 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
25572 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
25573 # additional function-key strings. Some other developers copied the feature,
25574 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
25575 # these key definitions less ambiguous.
25577 # A few terminals provide similar functionality (sending distinct keys when
25578 # a modifier is used), including rxvt.
25580 # These are the extended keys defined in this file:
25582 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
25583 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
25584 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
25585 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 kxIN kxOUT ka2 kb1
25588 # Bracketed paste is described with these capabilities in vim:
25590 # BE enables bracketed paste
25591 # BD disables bracketed paste
25592 # PS is sent before the pasted text
25593 # PE is sent after the pasted text
25595 # Here are the other xterm-related extensions which are used in this file:
25597 # Cr is a string capability which resets the cursor color
25598 # Cs is a string capability which sets the cursor color to a given value.
25599 # The single string parameter is the color name/number, according to the
25601 # Ms modifies the selection/clipboard. Its parameters are
25602 # p1 = the storage unit (clipboard, selection or cut buffer)
25603 # p2 = the base64-encoded clipboard content.
25604 # RV requests the terminal to report secondary device attributes (i.e, version).
25605 # rv shows the format of the terminal responses, as a regular expression.
25606 # Se resets the cursor style to the terminal power-on default.
25607 # Ss is a string capability with one numeric parameter. It is used to set the
25608 # cursor style as described by the DECSCUSR function to a block or
25610 # TS is a string capability which acts like "tsl", but uses no parameter and
25611 # goes to the first column of the "status line".
25612 # XF is set/true for terminals which support the xterm focus-in/focus-out
25613 # escape sequences sent from the terminal to the host when private mode
25614 # 1004 is set. Those are defined as kxIN and kxOUT, to take advantage of
25615 # ncurses keypad mode to interpret them like a function key. Because the
25616 # 1004 mode is usually combined with other flags to set the mouse protocol,
25617 # this flag provides an application with the information that the focus
25618 # mode is assumed to be set, e.g., in XM.
25619 # XM is a string capability which overrides ncurses's built-in string which
25620 # enables/disables xterm mouse mode.
25621 # xm shows the format of the mouse responses. Parameters:
25625 # p4 = state, e.g., pressed or released
25626 # p5 = y-ordinate starting region
25627 # p6 = x-ordinate starting region
25628 # p7 = y-ordinate ending region
25629 # p8 = x-ordinate ending region
25630 # Other extensions, used in xm:
25632 # XR requests the terminal to report its version as a free-format string.
25633 # xr shows the format of the terminal responses, as a regular expression.
25635 #### Miscellaneous extensions:
25637 # csr clears the status line
25638 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
25639 # This was implemented for the Hurd.
25640 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
25641 # experimental feature of tmux.
25642 # CO gives the number of indexed ("ANSI") colors which overlay an RGB color
25644 # E3 clears the terminal's scrollback buffer. This was implemented in the
25645 # Linux 3.0 kernel as a security feature. It matches a feature which was
25646 # added in xterm patch #107.
25647 # NQ denotes a terminal which does not support the standard query/response used
25648 # in u6/u7 (cursor position) and u8/u9 (device attributes).
25649 # U8 is a numeric capability which denotes a terminal emulator which does not
25650 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
25651 # value to enable it.
25652 # Smulx modifies the appearance of underlines in VTE, December 2017.
25654 ######## CHANGE HISTORY
25656 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
25657 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
25658 # maintained by Eric S. Raymond as part of the ncurses project.
25660 # This file contains all the capability information present in John Kunze's
25661 # last version of the termcap master file, except as noted in the change
25662 # comments at end of file. Some information about very ancient obsolete
25663 # capabilities has been moved to comments. Some all-numeric names of older
25664 # terminals have been retired.
25666 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
25667 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
25668 # used by BSD curses.
25670 # The 9.1.0 version of this file was translated from my lightly-edited copy of
25671 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
25672 # the purpose. Unless the ncurses tic implementation and the Lisp code were
25673 # making perfectly synchronized mistakes which I then failed to catch by
25674 # eyeball, the translation was correct and perfectly information-preserving.
25676 # Major version number bumps correspond to major version changes in ncurses.
25678 # Here is a log of the changes since then:
25680 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
25681 # * First terminfo master translated from 8.3.
25682 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
25683 # * Replaced Wyse entries with updated entries supplied by vendor.
25685 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
25686 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
25687 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
25688 # * Better XENIX keycap translation. Describe TC termcaps.
25689 # * Contact and history info supplied by Qume.
25690 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
25691 # * Raided the Shuford FTP site for recent termcaps/terminfos.
25692 # * Added information on X3.64 and VT100 standard escape sequences.
25693 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
25694 # * Added a correct X11R6 xterm entry.
25695 # * Fixed terminfo translations of padding.
25696 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
25697 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
25698 # * Added u6/u7/u8/u9 capabilities.
25699 # * Added PCVT entry.
25700 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
25701 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
25702 # to use reverse-video standout so Emacs will look right.
25703 # * Added el1 capability to ansi.
25704 # * Added smacs/rmacs to ansi.sys.
25706 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
25707 # * New mt70 entry.
25708 # * Added COPYRIGHTS AND OTHER DELUSIONS.
25709 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
25710 # smartvid & smarterm, ampex 175 & 219 & 232,
25711 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
25712 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
25713 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
25714 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
25715 # * Replaced the Perkin-Elmer entries with vendor's official ones.
25716 # * Restored the old minimal-ansi entry, luna needs it.
25717 # * Fixed some incorrect ip and proportional-padding translations.
25718 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
25719 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
25720 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
25721 # to force a particular height.
25722 # * Added beehive4 and reorganized other Harris entries.
25723 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
25724 # * Merged in DEC's official entries for its terminals. The only old
25725 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
25726 # * Replaced the translated BBN BitGraph entries with purpose-built
25727 # ones from AT&T's SVr3.
25728 # * Replaced the AT&T entries with AT&T's official terminfos.
25729 # * Added Teleray 16, vc415, cops10.
25730 # * Merged in many individual capabilities from SCO terminfo files.
25731 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
25733 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
25734 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
25735 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
25736 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
25737 # simterm, citoh and variants.
25738 # * Replaced sol entry with sol1 and sol2.
25739 # * Replaced Qume QVT and Freedom-series entries with purpose-built
25740 # terminfo entries.
25741 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
25742 # and dg200 entries using caps from from SCO.
25743 # * Added the usual set of function-key mappings to ANSI entry.
25744 # * Corrected xterm's function-key capabilities.
25745 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
25746 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
25747 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
25748 # * Fix in xterm entry, get the arrow keys right.
25749 # * Change some \0 escapes to \200.
25750 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
25751 # * Added apple (Videx card), adm1a, oadm31.
25752 # * Fixed malformed ampex csr.
25753 # * Fixed act4, cyb110; they had old-style prefix padding left in.
25754 # * Changed mandatory to advisory padding in many entries.
25755 # * Replaced HP entries up to hpsub with purpose-built ones.
25756 # * Blank rmir/smir/rmdc/smdc capabilities removed.
25757 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
25758 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
25759 # * Replaced the Ann Arbor entries with SCO's, the init strings are
25760 # more efficient (but the entries otherwise identical).
25761 # * Added dg211 from Shuford archive.
25762 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
25763 # adm42-nl, pc52, gs6300, xerox820, uts30.
25764 # * Pull SCO's padding into vi200 entry.
25765 # * Improved capabilities for tvi4107 and other TeleVideo and Viewpoint
25766 # entries merged in from SCO's descriptions.
25767 # * Fixed old-style prefix padding on zen50, h1500.
25768 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
25769 # entry from SCO's description.
25770 # * Reorganized the special entries.
25771 # * Added lm#0 to cbunix and virtual entries.
25773 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
25774 # * Restored cdc456tst.
25775 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
25776 # * Added megatek, beacon, microkit.
25777 # * Freeze for ncurses-1.9 release.
25778 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
25779 # * Added historical data for TAB.
25780 # * Comment fixes from David MacKenzie.
25781 # * Added the new BSDI pc3 entry.
25782 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
25783 # * A change in the tic -C logic now ensures that all entries in
25784 # the termcap translation will fit in < 1024 bytes.
25785 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
25786 # from GNU termcap file. This merges in all their local information.
25787 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
25788 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
25789 # * Added warnings about entries with long translations (restoring
25790 # all the GNU termcaps pushes a few over the edge).
25791 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
25792 # * Yet another tic change, and a couple of entry tweaks, to reduce the
25793 # number of long (> 1024) termcap translations back to 0.
25795 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
25796 # * Added kf13-kf20 to Linux entry.
25797 # * Regularize Prime terminal names.
25798 # * Historical data on Synertek.
25799 # * Freeze for ncurses-1.9.1.
25800 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
25801 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
25802 # * Eliminate whitespace in short name fields, this tanks some scripts.
25803 # * Name field changes to shorten some long entries.
25804 # * Termcap translation now automatically generates empty rmir/smir
25805 # when ich1/ich is present (copes with an ancient vi bug).
25806 # * Added `screen' entries from FSF's screen-3.6.2.
25807 # * Added linux-nic and xterm-nic entries.
25808 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
25809 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
25810 # eliminating some special-case code in ncurses.
25812 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
25813 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
25814 # that captures everything unique from it.
25815 # * Added reorder script generator.
25816 # * Freeze for ncurses 1.9.2 release.
25817 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
25818 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
25819 # * Added Olaf Siebert's corrections for adm12.
25820 # * ansi-pc-color now includes the colors and pairs caps, so that
25821 # entries which use it will inherit them automatically.
25822 # * The linux entry can now recognize the center (keypad 5) key.
25823 # * Removed some junk that found its way into Linux acsc.
25825 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
25826 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
25827 # * xterm doesn't try to use application keypad mode any more.
25828 # * Freeze for ncurses-1.9.3 release.
25829 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
25830 # * Added corrected sun entry from vendor.
25831 # * Added csr capability to linux entry.
25832 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
25833 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
25834 # * Some commented-out caps in long entries come back in, my code
25835 # for computing string-table lengths had a bug in it.
25836 # * pcansi series modified to fit comm-program reality better.
25837 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
25838 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
25839 # * Correct some bad aliases in the pcansi series
25840 # * Added entry for QNX console.
25841 # * Clean up duplicate long names for use with 4.4 library.
25842 # * Change vt100 standout to be normal reverse vide, not bright reverse;
25843 # this makes the Emacs status line look better.
25844 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
25845 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
25846 # * Minor surgery, mostly on name strings, to shorten termcap version.
25848 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
25849 # * Added dec-vt100 for use with the EWAN emulator.
25850 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
25851 # * Freeze for 1.9.5 alpha release.
25852 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
25853 # * Changed xterm lines to 24, the X11R6 default.
25854 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
25855 # * Added 7 newly discovered, undocumented acsc characters to linux
25856 # entry (the pryz{|} characters).
25857 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
25858 # * Correct two typos in the xterm entries introduced in 9.9.1.
25859 # * I finally figured out how to translate ko capabilities. Done.
25860 # * Added tvi921 entries from Tim Theisen.
25861 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
25862 # * Removed mystery tec entry, it was neither interesting nor useful.
25863 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
25864 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
25865 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
25866 # by making them relative to use capabilities
25867 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
25868 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
25869 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
25871 # * Translate all home=\E[;H capabilities to home=\E[H, they're
25873 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
25874 # vt100 and ANSI-like terminals.
25875 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
25876 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
25877 # does this now, too.
25878 # * fviewpoint is gone, it duplicated screwpoint.
25879 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
25880 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
25881 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
25882 # The UW vi50 replaces the old one, which becomes vi50adm,
25883 # * No more embedded commas in name fields.
25885 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
25886 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
25887 # * Introduced klone+* entries for describing Intel-console behavior.
25888 # * Linux kbs is default-mapped to delete for some brain-dead reason.
25889 # * -nsl -> -ns. The -pp syntax is obsolete.
25890 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
25891 # * Make xterm entry do application-keypad mode again. I got complaints
25892 # that it was messing up someone's 3270 emulator.
25893 # * Added some longname fields in order to avoid warning messages from
25894 # older tic implementations.
25895 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
25896 # it! (This gives us pi, greater than, less than, and a few more.)
25897 # * Freeze for ncurses-1.9.6 release.
25898 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
25899 # * Add xon to a number of console entries, they're memory-mapped and
25900 # don't need padding.
25901 # * Correct the use dependencies in the ansi series.
25902 # * Hand-translate more XENIX capabilities.
25903 # * Added hpterm entry for HP's X terminal emulator.
25904 # * Added aixterm entries.
25905 # * Shortened four names so everything fits in 14 chars.
25907 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
25908 # * Added ibcs2 entry and info on iBCS2 standard.
25909 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
25910 # * We can handle the HP meml/memu capability now.
25911 # * Added smacs to klone entries, just as documentation.
25912 # * Corrected ansi.sys and cit-500 entries.
25913 # * Added z39, vt320-k311, v220c, and avatar entries.
25914 # * Make pcansi use the ansi.sys invis capability.
25915 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
25916 # tvi925, tvi950, dt80, ncr7900i, h19.
25917 # * X3.64 has been withdrawn, change some references.
25918 # * Removed function keys from ansi-m entry.
25919 # * Corrected ansi.sys entry.
25920 # * Freeze for ncurses-1.9.7 release.
25921 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
25922 # * Added rmam/smam capabilities to many entries based on init strings.
25923 # * Added correct hpa/vpa to linux.
25924 # * Reduced several entries relative to vt52.
25925 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
25926 # * Exiled some utterly unidentifiable custom and homebrew types to the
25927 # UFO file; also, obsolete small-screen hardware; also, entries which
25928 # look flat-out incorrect, garbled, or redundant. These include the
25929 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
25930 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
25931 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
25932 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
25933 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
25934 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
25935 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
25936 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
25937 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
25938 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
25939 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
25940 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
25941 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
25942 # * Corrected pcvt25h as suggested by Brian C. Grayson
25943 # <bgrayson@pine.ece.utexas.edu>.
25944 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
25945 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
25946 # * Added kent=\EOM to xterm entry.
25948 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
25949 # * Corrected gigi entry.
25950 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
25951 # bad hpa/vpa capabilities.
25952 # * Corrected flash strings to have a uniform delay of .2 sec. No
25953 # more speed-dependent NUL-padding!
25954 # * terminfo capabilities in comments bracketed with <>.
25955 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
25956 # * Replaced pcvt with the 3.31 pcvt entries.
25957 # * Freeze for 1.9.7a.
25958 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
25959 # * Added emu entry from the X11R6 contrib tape sources.
25961 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
25962 # * Improved iris-ansi and sun entries.
25963 # * More flash string improvements.
25964 # * Corrected wy160 & wy160 as suggested by Robert Dunn
25965 # * Added dim to at386.
25966 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
25967 # he's ready to start using the termcap generated from this one.
25968 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
25969 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
25970 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
25971 # att610, att620, att630,
25972 # * Changed hazeltine name prefix from h to hz.
25973 # * Sent t500 to the UFI file.
25974 # * I think we've sucked all the juice out of BSDI's termcap file now.
25975 # * Freeze for ncurses 1.9.8 release
25976 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
25977 # * Unfreeze, linux kbs needed to be fixed.
25978 # * Tim Theisen pinned down a bug in the DMD firmware.
25979 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
25980 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
25981 # (The broken ones had been shadowed by sgr.)
25982 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
25983 # * Added documentation on ECMA-48 standard.
25984 # * New Amiga entry.
25985 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
25986 # * More ECMA-48 stuff
25987 # * Corrected typo in minix entry, added pc-minix.
25988 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
25989 # * Added rxvt entry.
25990 # * Added 1.3.x color-change capabilities to linux entry.
25991 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
25992 # * Corrected rxvt entry khome/kend.
25993 # * Corrected linux color change capabilities.
25994 # * NeXT entries from Dave Wetzel.
25995 # * Cleaned up if and rf file names (all in /usr/share now).
25996 # * Changed linux op capability to avoid screwing up a background color
25997 # pair set by setterm.
25998 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
25999 # * Added xterm-sun.
26000 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
26003 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
26004 # * Another sweep through the Shuford archive looking for new info.
26005 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
26006 # * Added st52 from Per Persson.
26007 # * Added eterm from the GNU Emacs 19.30 distribution.
26008 # * Freeze for 1.9.9.
26009 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
26010 # * FreeBSD console entries from Andrew Chernov.
26011 # * Removed duplicate Atari st52 name.
26012 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
26013 # * xterm doesn't actually have ACS_BLOCK.
26014 # * Change klone+color setf/setb to simpler forms that can be
26015 # translated into termcap.
26017 # * Removed mechanically-generated junk capabilities from cons* entries.
26018 # * Added color support to bsdos.
26019 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
26020 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
26021 # * Created ecma+color, linux can use it. Also added ech to linux.
26022 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
26023 # * Add descriptions to FreeBSD console entries. Also shorten
26024 # some aliases to <= 14 chars for portability.
26025 # * Added x68k console
26026 # * Added OTbs to several VT-series entries.
26027 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
26028 # * screen entry update for 3.7.1 from Michael Alan Dorman.
26029 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
26030 # * kterm correction due to Kenji Rikitake.
26031 # * ACS correction in vt320-kll due to Phillippe De Muyter.
26032 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
26033 # * Sun console entry correction from J.T. Conklin.
26034 # * Changed all DEC VT300 and up terminals to use VT300 tab set
26035 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
26036 # * Added smul to linux entry (we never noticed it was missing
26037 # because of sgr!).
26038 # * Added rmln to hp+labels (deduced from other HP entries).
26039 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
26040 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
26041 # * Corrected vt220 acsc.
26042 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
26043 # this corresponds to reality and helps prevent some tic warnings.
26044 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
26045 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
26046 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
26047 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
26048 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
26049 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
26050 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
26051 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
26052 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
26053 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
26054 # ifmr, v3220, wy100q, tandem653, ibmaed.
26055 # * Added DWK terminal description.
26056 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
26057 # * Many entries now have highlights inherited from adm+sgr.
26058 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
26059 # * xtitle and xtitle-twm enable access to the X status line.
26060 # * Added linux-1.3.6 color palette caps in conventional format.
26061 # * Added adm1178 terminal.
26062 # * Move fos and apollo terminals to obsolete category.
26063 # * Aha! The BRL terminals file told us what the Iris extensions mean.
26064 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
26065 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
26067 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
26068 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
26069 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
26070 # * Corrected, from BRL termcap file: vi50.
26071 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
26072 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
26073 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
26074 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
26075 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
26076 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
26077 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
26078 # * Paired-attribute fixes to various terminals.
26079 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
26080 # * xterm entry corrections from Thomas Dickey.
26081 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
26082 # * Added t916 entry, translated from a termcap in SCO's support area.
26083 # * New qnx entry from Michael Hunter.
26084 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
26085 # * Added hpex2 from Ville Sulko.
26086 # * Fixed a bug that ran the qnx and pcvtXX together.
26087 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
26088 # * Added dtterm entry from Solaris CDE.
26089 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
26090 # * corrected pairs#8 typo in dtterm entry.
26092 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
26093 # * updated xterm entry to cover 3.1.2E's new features.
26094 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
26095 # * Added new minix entry
26096 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
26097 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
26098 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
26099 # * Added Prism entries and kt7ix.
26100 # * Caution notes about EWAN and tabset files.
26101 # * Changed /usr/lib/tabset -> /usr/share/tabset.
26102 # * Added acsc/rmacs/smacs to vt52.
26103 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
26104 # * Merged in Thomas Dickey's reorganization of the xterm entries;
26105 # added technical corrections to avoid warning messages.
26106 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
26107 # * Added rmso=\E[27m in Linux entry.
26108 # * Added koi8-r support for Linux console.
26109 # * Replace xterm entries with canonical ones from XFree86 3.2.
26110 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
26111 # * Added color_xterm from Jacob Mandelson
26112 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
26113 # * Back off the xterm entry to use r6 as a base.
26114 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
26115 # * Added dec-vt220 at Adrian Garside's request.
26117 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
26119 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
26120 # * Minor corrections to xterm entries.
26121 # * Replaced EWAN telnet entry.
26122 # * Dropped the reorder script generator. It was a fossil.
26123 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
26124 # * Replaced minitel-2 entry.
26125 # * Added MGR, ansi-nt.
26126 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
26127 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
26128 # the 4.4BSD Lite2 file.
26130 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
26131 # * Use setaf/setab consistently with SVr4.
26132 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
26133 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
26134 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
26135 # * add xterm-16color, for XFree86 3.3
26136 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
26137 # * correct typo in emu
26138 # * correct typo in vt102-w (Robert Wuest)
26139 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
26140 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
26141 # * remove ech capability from rxvt (it does the wrong thing)
26142 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
26143 # * remove spurious newlines from several entries (hp+color, wy50,
26144 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
26146 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
26147 # * correct rmso capability of wy50-mc
26148 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
26149 # * add cbt to xterm-xf86-v32
26150 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
26151 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
26152 # other capabilities not in xterm-r6.
26153 # * remove alternate character set from kterm entry.
26154 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
26155 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
26156 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
26157 # * add xterm-8bit entry.
26158 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
26159 # * repair several places where early version of tic replaced \, with \\\,
26160 # * make acsc entries canonical form (sorted, uniq).
26161 # * modify acsc entries for linux, linux-koi8
26162 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
26163 # * add color, mouse support to kterm.
26164 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
26165 # * correct wy120 smxon/tbc capabilities which were stuck together.
26166 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
26167 # * add entry for xterm-xf86-v39t
26168 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
26169 # * add u8,u9 to sun-il description
26170 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
26171 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
26173 # * add hds200 description (Walter Skorski)
26174 # * add EMX 0.9b descriptions
26175 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
26176 # * rename xhpterm back to hpterm.
26177 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
26178 # * change initc in linux-c-nc to use 0..1000 range.
26179 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
26180 # * remove hpa/vpa from rxvt, which implements them incorrectly.
26181 # * add sgr0 for rxvt.
26182 # * remove bogus smacs/rmacs from EMX descriptions.
26183 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
26184 # * revised entry for att7300
26185 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
26186 # * use \0 rather than \200.
26187 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
26188 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
26189 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
26190 # * rename xterm-xf86-v39t to xterm-xf86-v40
26191 # * remove bold/underline from sun console entries since they're not
26193 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
26194 # * add beterm entry (Fred Fish)
26195 # * add irix-color/xwsh entry.
26196 # * turn ncv off for linux.
26197 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
26198 # * set ncv for FreeBSD console (treat colors with reverse specially).
26199 # * remove sgr string from qnx based on report by Xiaodan Tang
26200 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
26201 # * remove spurious commas from descriptions
26202 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
26203 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
26204 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
26205 # apparently based on cp-866).
26207 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
26209 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
26210 # * Replaced minitel-2 entry.
26211 # * Added MGR, ansi-nt.
26212 # * Minor corrections to xterm entries.
26213 # * Replaced EWAN telnet entry.
26214 # * Dropped the reorder script generator. It was a fossil.
26215 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
26216 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
26217 # the 4.4BSD Lite2 file.
26218 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
26219 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
26220 # * Updated iris-ansi; corrected vt102-w.
26221 # * Switch base xterm entry to 3.3 level.
26222 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
26224 # * Removed rmir/smir from tv92B.
26226 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
26227 # * add hds200 description (Walter Skorski)
26228 # * add beterm entry (Fred Fish)
26229 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
26230 # iris-color entries.
26231 # * add emx entries.
26232 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
26233 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
26235 # * remove sgr string from qnx based on report by Xiaodan Tang
26236 # * Added u8/u9, removed rmul/smul from sun-il.
26237 # * 4.2 tic displays \0 rather than \200.
26238 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
26239 # apparently based on cp-866).
26240 # * Merged in Pavel Roskin's acsc for linux-koi8
26241 # * Corrected some erroneous \\'s to \.
26242 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
26243 # * II -> ii in pcvtXX, screen, xterm.
26244 # * Removed \n chars following ANSI escapes in sgr & friends.
26245 # * Updated Wyse entries.
26246 # * h19 corrections from Tim Pierce.
26247 # * Noted that the dm2500 has both ich and smir.
26248 # * added pccons for the Alpha under OSF/1.
26249 # * Added Sony NEWS workstation entries and cit101e-rv.
26250 # * Reverted `amiga'; to Kent Polk's version, as I'm told
26251 # the Verkuil entry messes up with Amiga Telnet.
26252 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
26253 # * Corrected attributions in 10.2.0 release notes.
26254 # * Scanned the Shuford archive for new terminfos and information.
26255 # * Removed sgr from qnx entry (Thomas Dickey).
26256 # * Added entries for ICL and Kokusai Data Systems terminals.
26257 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
26258 # * Incorporated att700 from the Boundless Technology FTP site.
26259 # * Miscellaneous contact-address and Web-page updates.
26261 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
26264 # * add nxterm and xterm-color terminfo description (request by Cristian
26265 # Gafton <gafton@redhat.com>).
26266 # * modify rxvt terminfo description to clear alternate screen before
26267 # switching back to normal screen, for compatibility with applications
26268 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
26269 # * modify linux terminfo description to reset color palette (reported
26270 # by Telford Tendys <telford@eng.uts.edu.au>).
26273 # * merge changes from current XFree86 xterm terminfo descriptions.
26276 # * Added minitel1 entries from Alexander Montaron.
26277 # * Added qnxt2 from Federico Bianchi.
26278 # * Added arm100 terminfo entries from Dave Millen.
26281 # * Added ncsa telnet entries from Francesco Potorti
26284 # * modify ncsa telnet entry to reflect color, other capabilities based on
26285 # examination of the source code - T.Dickey.
26288 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
26291 # * Added Francesco Potorti's tuned Wyse 99 entries.
26292 # * dtterm enacs correction from Alexander V. Lukyanov.
26293 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
26294 # * correct a typo in icl6404 entry.
26295 # * add xtermm and xtermc
26298 # * format most %'char' sequences to %{number}
26299 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
26300 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
26303 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
26304 # * correct initialization string in xterm-r5, add misc other features
26305 # to correspond with xterm patch #84 - TD
26308 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
26309 # * add Mathew Vernon's mach console entries
26310 # * corrections for ncsa function-keys (report by Larry Virden)
26313 # * change linux to use ncv#2, since underline does not work with color - TD
26316 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
26317 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
26318 # application modes, change kent to use the correct keypad code - TD
26321 # * add entry for Tera Term - TD
26324 # * minor improvements for teraterm entry - TD
26325 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
26326 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
26329 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
26330 # xterm and ncsa entries by removing the unneeded ones. Note that
26331 # some entries will return kend & khome versus kslt and kfnd, for
26332 # PC-style keyboards versus strict vt220 compatibility - TD
26335 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
26337 # * add 'crt' entry - TD
26338 # * correct typos in 'linux-c' entry - TD
26341 # * update entries for BSD/OS console to use klone+sgr and klone+color
26342 # (Jeffrey C Honig)
26345 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
26348 # * add linux-lat, from RedHat patches to ncurses 4.2
26351 # * add complete set of default function-key definitions for scoansi - TD.
26354 # * add cnorm, cvvis for Linux 2.2 kernels
26357 # * add kmous to xterm-r5 -TD
26358 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
26359 # parent "use" clause -TD
26362 # * corrected cnorm, added el1 in 'screen' description -TD
26365 # * add ms-vt100 -TD
26368 # * corrections to beterm entry -TD
26371 # * add cygwin entry -TD
26374 # * minor corrections for beterm entry -TD
26377 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
26380 # * add amiga-8bit entry
26381 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
26382 # rcons-color, based on
26383 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
26384 # * add alias for iris-ansi-net
26387 # * corrected scoansi entry's acsc, some function keys, add color -TD
26390 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
26391 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
26392 # key mapping, leaving Potorti's entries more like he named them -TD
26393 # * remove enter/exit am-mode from cygwin -TD
26396 # * correct typos in several entries (missing '[' from CSI):
26397 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
26398 # strings for avt-ns -TD
26399 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
26402 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
26403 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
26404 # * add xterm-88color and xterm-256color -TD
26407 # * add "obsolete" termcap strings -TD
26408 # * add kvt and gnome entries -TD
26411 # * correct cup string for regent100 -TD
26414 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
26415 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
26416 # * change OTrs capabilities to rs2 -TD
26417 # * add obsolete and extended capabilities to 'screen' -TD
26420 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
26422 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
26423 # and adding kcbt -TD
26426 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
26427 # nonstandard resource settings -TD
26430 # * minor fixes for xterm-*, based on Debian #58530 -TD
26433 # * add several terminal types from esr's "11.0", as well as comments.
26434 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
26435 # vt220-8bit, vt220-old, wy85-8bit
26438 # * add several terminal types from esr's "11.0.1" (ansi-*).
26439 # * update OTxx capabilities for changes on 2000/3/4.
26440 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
26443 # * move screen's AX extension to ecma+color, modify several entries to
26444 # use that, adjusting ncv as needed -TD
26447 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
26448 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
26449 # in esr's version.
26452 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
26453 # * correct color definition for ibm3164, make minor changes to other
26454 # IBM terminal definitions based on recent terminfo descriptions -TD
26457 # * add mgterm, from NetBSD -TD
26458 # * add alias sun-cgsix for sun-ss5 as per NetBSD
26459 # * change cons25w to use rs2 for reset rather than rs1 -TD
26460 # * add rc/sc to aixterm based on manpage -TD
26463 # * remove ncv from xterm-16color, xterm-256color
26466 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
26469 # * add Eterm (Michael Jennings)
26472 # * add amiga-vnc entry.
26475 # * correct description of Top Gun Telnet.
26476 # * add kterm-color
26479 # * add qansi* entries from QNX ftp site.
26482 # * add Matrix Orbital entries by Eric Z. Ayers).
26483 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
26487 # * add S0, E0 extensions to screen's entry -TD
26490 # * several corrections based on tic's new parameter-checking code -TD
26491 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
26492 # bracketing sequences that reset video attributes (\E8 would restore
26496 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
26499 # * improved scoansi, based on SCO man-page, and testing console,
26500 # scoterm with tack -TD
26503 # * modify kterm to use acsc via SCS controls.
26506 # * screen 3.9.8 allows xterm mouse controls to pass-through
26509 # * remove spurious "%|" from some xterm entries.
26512 # * modify 'screen' khome/kend to match screen 3.09.08
26513 # * add examples of 'screen' customization (screen.xterm-xfree86,
26514 # screen.xterm-r6, screen.teraterm) -TD
26517 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
26518 # * add "Apple_Terminal" entries -Benjamin Sittler
26519 # * remove time-delays from "Apple_Terminal" entries -TD
26520 # * make sgr entries time-delays consistent with individual caps -TD
26523 # * corrected/updated screen.xterm-xfree86
26526 # * ELKS descriptions, from Federico Bianchi
26527 # * add u6 (CSR) to Eterm (Michael Jennings).
26530 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
26531 # tic which handles names no longer than 14 characters. Add
26532 # corresponding descriptions for the Darwin PowerPC console named
26533 # "xnuppc" -Benjamin Sittler
26536 # * change kbs in mach entries to ^? (Marcus Brinkmann).
26539 # * add "putty" entry -TD
26540 # * updated "Apple_Terminal" entries -Benjamin Sittler
26543 # * add ms-vt100-color entry -TD
26544 # * add "konsole" entries -TD
26547 # * update gnome entry to Redhat 7.2 -TD
26550 # * add kf13-kf48 strings to cons25w -TD
26551 # * add pcvt25-color entry -TD
26552 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
26553 # * improve some features of scoansi entry based on SCO's version -TD
26554 # * add scoansi-new entry corresponding to OpenServer 5.0.6
26557 # * add kcbt to screen entry -TD
26560 # * add rxvt-16color, ibm+16color, mvterm entries -TD
26563 # * split out linux-basic entry, making linux-c inherit from that, and
26564 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
26565 # the history of this console type -TD
26566 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
26567 # r/g/b parameters of initc are in the range 0 to 1000 -TD
26570 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
26573 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
26574 # in the latter -TD
26577 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
26578 # * ncr260wy350pp has only 16 color pairs -TD
26579 # * add sun-type4 from NetBSD -TD
26580 # * update xterm-xfree86 to current (xterm patch #170) -TD
26581 # * add screen-bce, screen-s entries -TD
26582 # * add xterm-1002, xterm-1003 entries -TD
26585 # * update homepage for Top Gun Telnet/SSH
26588 # * reduce duplication in emx entries, added emx-base -TD
26591 # * corrected acs for screen.teraterm -TD
26592 # * add tkterm entry -TD
26595 # * cygwin changes from Charles Wilson:
26596 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
26597 # primary instead of nxterm, to match XFree86's xterm.terminfo
26598 # usage and to prevent circular links.
26599 # (rxvt): add additional codes from rxvt.org.
26600 # (rxvt-color): new alias
26601 # (rxvt-xpm): new alias
26602 # (rxvt-cygwin): like rxvt, but with special acsc codes.
26603 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
26604 # with a "native" MSWin GUI. Each takes different acsc codes,
26605 # which are both different from the "normal" rxvt's acsc.
26606 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
26607 # (cygwinDBG): ditto.
26610 # * update gnome terminal entries -TD
26613 # * add entries for djgpp 2.03 and 2.04 -TD
26616 # * add alias for vtnt -TD
26617 # * update xterm-xfree86 for XFree86 4.4 -TD
26620 # * add linux-vt (Andrey V Lukyanov)
26623 # * add screen.linux -TD
26626 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
26629 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
26630 # * add vt100+ and vt-utf8 entries -TD
26631 # * add uwin entry -TD
26634 # * add sgr strings to several common entries lacking them, e.g.,
26635 # screen, to make the entries more portable -TD
26636 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
26637 # * similar fixups for cvvis/cnorm various entries -TD
26640 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
26644 # * add xterm-xf86-v44 -TD
26645 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
26646 # on G1 being used via an ISO-2022 escape sequence (report by
26647 # Juliusz Chroboczek) -TD
26648 # * add 'hurd' entry -TD
26651 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
26653 # * align with xterm #192's use of xterm-new -TD
26654 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
26655 # * make xterm-new the default "xterm" -TD
26658 # * minor fixes for emu -TD
26660 # * add rmam/smam to linux (Trevor Van Bremen)
26661 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
26662 # * fixes for avatar0 -TD
26663 # * fixes for vp3a+ -TD
26666 # * add xterm-pc-fkeys -TD
26667 # * review/update gnome and gnome-rh90 entries (prompted by
26668 # Redhat Bugzilla #122815) -TD
26669 # * review/update konsole entries -TD
26670 # * add sgr, correct sgr0 for kterm and mlterm -TD
26671 # * correct tsl string in kterm -TD
26674 # * make ncsa-m rmacs/smacs consistent with sgr -TD
26675 # * add sgr, rc/sc and ech to syscons entries -TD
26676 # * add function-keys to decansi -TD
26677 # * add sgr to mterm-ansi -TD
26678 # * add sgr, civis, cnorm to emu -TD
26679 # * correct/simplify cup in addrinfo -TD
26680 # * corrections for gnome and konsole entries
26681 # (Redhat Bugzilla #122815) -Hans de Goede
26682 # * modify DEC entries (vt220, etc), to add sgr string, and to use
26683 # ISO-2022 strings for rmacs/smacs -TD
26686 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
26689 # * improved putty entry -Robert de Bath
26692 # * remove dch/dch1 from rxvt because they are implemented inconsistently
26693 # with the common usage of bce/ech -TD
26694 # * remove khome from vt220 (vt220's have no home key) -TD
26695 # * add rxvt+pcfkeys -TD
26698 # * modify several entries to ensure xterm mouse and cursor visibility
26699 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
26700 # Eterm, screen. (The xterm entries are left alone - old ones for
26701 # compatibility, and the new ones do not require this change) -TD
26704 # * add morphos entry -Pavel Fedin
26705 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
26706 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
26709 # * update wsvt25 entry -TD
26712 # * update pairs for xterm-88color and xterm-256color to reflect the
26713 # ncurses extended-color support -TD
26716 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
26717 # * add aixterm-16color to demonstrate 16-color capability -TD
26720 # * add media-copy to vt100 -TD
26721 # * corrected acsc string for vt52 -TD
26724 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
26726 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
26729 # * re-corrected acsc string for vt52 -TD
26732 # * corrected sun-il sgr string which referred to bold and underline -TD
26733 # * add sun-color entry -TD
26736 # * modify sgr0 in several entries to reset alternate-charset as in the
26738 # * modify sgr string of prism9 to better match the individual
26742 # * correct order of use= in rxvt-basic -TD
26745 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
26748 # * other minor fixes to cygwin based on tack -TD
26749 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
26752 # * add nsterm-16color entry -TD
26753 # * remove ncv flag from xterm-16color -TD
26754 # * remove setf/setb from xterm-256color to match xterm #209 -TD
26755 # * update mlterm entry to 2.9.2 -TD
26758 # * fixes to make nsterm-16color match report
26759 # by Christian Ebert -Alain Bench
26762 # * add xterm+256color building block -TD
26763 # * add gnome-256color, putty-256color, rxvt-256color -TD
26766 # * add hpterm-color -TD
26769 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
26770 # * add gnome-fc5 (prompted by GenToo #122566) -TD
26771 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
26772 # * improve xterm-256color by combining the ibm+16color setaf/setab
26773 # strings with SGR 48. The setf/setb strings also are cancelled here
26774 # rather than omitted so derived entries will cancel those also -Alain
26778 # * add some notes regarding copyright to terminfo.src -TD
26779 # * use rxvt+pcfkeys in Eterm -TD
26780 # * remove km and flash from gnome, Eterm and rxvt since they do not work
26781 # as one would expect (km sends ESC rather than setting the 8th bit
26783 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
26784 # * add konsole-solaris -TD
26787 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
26788 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
26789 # * modify xterm-24 to inherit from "xterm" -TD
26790 # * add xiterm entry -TD
26791 # * add putty-vt100 entry -TD
26792 # * corrected spelling of Michael A Dorman's name, prompted by
26793 # http://www.advogato.org/person/mdorman/diary.html -TD
26796 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
26797 # * update xterm+pcfkeys to match xterm #216 -TD
26800 # * make descriptions of xterm entries consistent with its terminfo -TD
26803 # * add xfce, mgt -TD
26806 # * correct acsc string in kterm -TD
26809 # * add kon entry -TD
26810 # * remove invis from linux and related entries, add klone+sgr8 for those
26811 # that implement the feature (or have not been shown to lack it) -TD
26814 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
26815 # * minor improvements to rxvt+pcfkeys -TD
26818 # * fix a few typos in if/then/else expressions -TD
26821 # * add several GNU Screen variations with 16- and 256-colors, and
26822 # status line (Alain Bench).
26825 # * add Newbury Data entries (Jean-Charles Billaud).
26828 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
26831 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
26832 # * add konsole-256color entry -TD
26835 # * add 9term entry (request by Juhapekka Tolvanen) -TD
26838 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
26839 # * add shift-control- and control-modified keys for rxvt editing
26841 # * update mlterm entry to 2.9.3 -TD
26842 # * add mlterm+pcfkeys -TD
26845 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
26846 # xterm+pcc0, etc., to make the corresponding building blocks reflect
26847 # xterm's capabilities -TD
26848 # * add mrxvt entry -TD
26849 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
26852 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
26855 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
26856 # xterm starting with xterm patch #216 -TD
26857 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
26858 # to match xterm #230 -TD
26859 # * extend xterm+pccX entries to match xterm #230 -TD
26860 # * add xterm+app, xterm+noapp, from xterm #230 -TD
26861 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
26864 # * add screen.rxvt -TD
26867 # * add screen+fkeys (prompted by Debian #478094) -TD
26870 # * add screen.mlterm -TD
26871 # * improve mlterm and mlterm+pcfkeys -TD
26874 # * add Eterm-256color, Eterm-88color -TD
26875 # * add rxvt-88color -TD
26878 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
26879 # original to teraterm2.3 -TD
26880 # * update "gnome" to 2.22.3 -TD
26881 # * update "konsole" to 1.6.6 -TD
26882 # * add "aterm" -TD
26883 # * add "linux2.6.26" -TD
26886 # * change several \E[2g (clear tab at current column) to \E[3g
26887 # (clear all tabs) to match definition for tbc capability -TD
26890 # * add eterm-color -TD
26893 # * add screen.Eterm -TD
26896 # * correct typo in pfkey of ansi.sys-old
26897 # (report by Kalle Olavi Niemitalo)
26898 # * move function- and cursor-keys from emx-base to ansi.sys, and create
26899 # a pfkey capability which handles F1-F48 -TD
26902 # * add vwmterm entry (Bryan Christ)
26905 # * change ncv and op capabilities in sun-color to match Sun's entry for
26906 # this (report by Laszlo Peter)
26907 # * improve interix smso by using reverse rather than bold (report by
26908 # Kristof Zelechovski).
26911 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
26912 # * add linux-16color (Benjamin Sittler)
26913 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
26914 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
26915 # * add ccc and initc capabilities to xterm-16color -TD
26918 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
26921 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
26924 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
26925 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
26928 # * add bterm (bogl 0.1.18) -TD
26929 # * minor fix to rxvt+pcfkeys -TD
26932 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
26935 # * add several screen-bce.XXX entries -TD
26938 # * modify screen-bce.XXX entries to exclude ech, since screen's color
26939 # model does not clear with color for that feature -TD
26942 # * rename atari and st52 to atari-old, st52-old, use newer entries from
26943 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
26946 # * add mlterm-256color entry -TD
26949 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
26950 # the alternate character set (patch by Nicholas Marriott)
26953 # * improve acsc for vt52 (Benjamin Sittler)
26954 # * modify nsterm entries for consistent sgr/sgr0 -TD
26955 # * modify xnuppc entries for consistent sgr/sgr0 -TD
26956 # * add invis to tek4115 sgr -TD
26959 # * reformat acsc strings to canonical format -TD
26962 # * add "XT" capability to entries for terminals that support both
26963 # xterm-style mouse- and title-controls, for "screen" which
26964 # special-cases TERM beginning with "xterm" or "rxvt" -TD
26967 # * fill in no-parameter forms of cursor-movement where a parameterized
26968 # form is available -TD
26969 # * fill in missing cursor controls where the form of the controls is
26971 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
26974 # * correct comparison used for setting 16-colors in linux-16color
26975 # entry (Novell #644831) -TD
26976 # * improve linux-16color entry, using "dim" for color-8 which makes it
26977 # gray rather than black like color-0 -TD
26980 # * make "vte" the principal entry defining "gnome", since GNOME terminal
26981 # is merely one of several terminals whose behavior is provided by this
26985 # * fix typo in rmso for tek4106 -Goran Weinholt
26988 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
26989 # * also suppress ncv in konsole-base -TD
26992 # * add U8 feature to denote entries for terminal emulators which do not
26993 # support VT100 SI/SO when processing UTF-8 encoding -TD
26994 # * add xterm-utf8 as a demo of the U8 feature -TD
26997 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
27000 # * update minix entry to minix 3.2 (Thomas Cort).
27003 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
27004 # * remove a backslash which continued comment, obscuring altos3
27005 # definition with OpenBSD toolset (Nicholas Marriott).
27008 # * add/use xterm+tmux chunk from xterm #271 -TD
27009 # * resync xterm-new entry from xterm #271 -TD
27010 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
27011 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
27012 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
27015 # * add kich1 to sun (Yuri Pankov)
27016 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
27019 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
27022 # * minor cleanup of X-terminal emulator section -TD
27023 # * add terminator entry -TD
27024 # * add simpleterm entry -TD
27027 # * add xterm+kbs fragment from xterm #272 -TD
27030 # * add pccon entries for OpenBSD console (Alexei Malinin)
27033 # * corrected old changelog comments -TD
27036 # * add putty-sco -TD
27039 # * add mach-gnu (Samuel Thibault)
27040 # * add mach-gnu-color, tweaks to mach-gnu -TD
27041 # * make sgr for sun-color agree with smso -TD
27042 # * make sgr for prism9 agree with other caps -TD
27043 # * make sgr for icl6404 agree with other caps -TD
27044 # * make sgr for ofcons agree with other caps -TD
27045 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
27046 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
27047 # * make sgr for avt-ns agree with other caps -TD
27050 # * make sgr for xterm-pcolor agree with other caps -TD
27051 # * make sgr for att5425 agree with other caps -TD
27052 # * make sgr for att630 agree with other caps -TD
27053 # * make sgr for linux entries agree with other caps -TD
27054 # * make sgr for tvi9065 agree with other caps -TD
27055 # * make sgr for ncr260vt200an agree with other caps -TD
27056 # * make sgr for ncr160vt100pp agree with other caps -TD
27057 # * make sgr for ncr260vt300an agree with other caps -TD
27058 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
27059 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
27062 # * correct order of use-clauses in st-256color -TD
27065 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
27068 # * document all of the user-defined capabilities in one place -TD
27069 # * add XT to some places to improve usefulness for other applications
27070 # than screen, which would like to pretend that xterm's title is
27071 # a status-line. -TD
27072 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
27073 # of ordering and overrides -TD
27076 # * add msgr to vt420, similar DEC vtXXX entries -TD
27077 # * add several missing vt420 capabilities from vt220 -TD
27078 # * factor out ansi+pp from several entries -TD
27079 # * change xterm+sl and xterm+sl-twm to include only the status-line
27080 # capabilities and not "use=xterm", making them more generally useful
27081 # as building-blocks -TD
27082 # * add dec+sl building block, as example -TD
27085 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
27086 # * add eslok flag to dec+sl -TD
27087 # * dec+sl applies to vt320 and up -TD
27088 # * drop wsl width from xterm+sl -TD
27089 # * reuse xterm+sl in putty and nsca-m -TD
27090 # * add ansi+tabs to vt520 -TD
27091 # * add ansi+enq to vt220-vt520 -TD
27094 # * remove p6 (bold) from opus3n1+ for consistency -TD
27095 # * remove acs stuff from env230 per clues in Ingres termcap -TD
27096 # * modify env230 sgr/sgr0 to match other capabilities -TD
27097 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
27098 # * make sgr for dku7202 agree with other caps -TD
27099 # * make sgr for ibmpc agree with other caps -TD
27100 # * make sgr for tek4107 agree with other caps -TD
27101 # * make sgr for ndr9500 agree with other caps -TD
27102 # * make sgr for sco-ansi agree with other caps -TD
27103 # * make sgr for d410 agree with other caps -TD
27104 # * make sgr for d210 agree with other caps -TD
27105 # * make sgr for d470c, d470c-7b agree with other caps -TD
27108 # * rewrite vt520 entry based on vt420 -TD
27109 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
27112 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
27113 # analysis by Martin Husemann).
27114 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
27115 # Onno van der Linden).
27116 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
27117 # * add kdch1, etc., to qvt108 -TD
27118 # * add dl1/il1 to some entries based on dl/il values -TD
27119 # * add dl to simpleterm -TD
27122 # * modify some older xterm entries to align with xterm source -TD
27123 # * separate "xterm-old" alias from "xterm-r6" -TD
27126 # * add E3 to xterm-basic and putty -TD
27129 # * add nsterm-256color, make this the default nsterm -TD
27130 # * remove bw from nsterm-bce, per testing with tack -TD
27133 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
27134 # (patch by Christian Persch).
27137 # * reviewed vte-2012, reverted most of the change since it was incorrect
27138 # based on testing with tack -TD
27139 # * un-cancel the initc in vte-256color, since this was implemented
27140 # starting with version 0.20 in 2009 -TD
27143 # * correct typo in sgr string for sun-color,
27144 # add bold for consistency with sgr,
27145 # change smso for consistency with sgr -TD
27146 # * correct typo in sgr string for terminator -TD
27147 # * add blink to the attributes masked by ncv in linux-16color (report
27148 # by Benjamin Sittler)
27151 # * change initialization for vt220, similar entries for consistency
27152 # with cursor-key strings (NetBSD #47674) -TD
27153 # * further improvements to linux-16color (Benjamin Sittler)
27156 # * move nsterm-related entries out of "obsolete" section to more
27157 # plausible "ansi consoles" -TD
27158 # * additional cleanup of table-of-contents by reordering -TD
27161 # * added note to clarify Terminal.app's non-emulation of the various
27162 # terminal types listed in the preferences dialog -TD
27165 # * use TS extension to describe xterm's title-escapes -TD
27166 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
27167 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
27168 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
27169 # (Debian #727119).
27170 # * simplify pfkey expression in ansi.sys -TD
27173 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
27176 # * updated notes for wsvt25 based on tack and vttest -TD
27177 # * add teken entry to show actual properties of FreeBSD's "xterm"
27181 # * add terminology entry -TD
27182 # * add mlterm3 entry, use that as "mlterm" -TD
27183 # * inherit mlterm-256color from mlterm -TD
27186 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
27189 # * cancel ccc in putty-256color and konsole-256color for consistency
27190 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
27191 # * add xterm+256setaf building block for various terminals which only
27192 # get the 256-color feature half-implemented -TD
27193 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
27197 # * add vt520ansi (Mike Gran)
27200 # * correct several entries which had termcap-style padding used in
27201 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
27202 # * correct syntax for padding in some entries: dg211, h19 -TD
27203 # * correct ti924-8 which had confused padding versus octal escapes -TD
27204 # * correct padding in sbi entry -TD
27207 # * update xterm-new to xterm patch #305 -TD
27208 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
27209 # (italic). This was a long-ago typo in screen 3.1.1 which was
27210 # overlooked until a few terminal emulators implemented the feature -TD
27213 # > fix regression in screen terminfo entries (reports by Christian
27214 # Ebert, Gabriele Balducci) -TD
27215 # + revert the change to screen; see notes for why this did not work -TD
27216 # + cancel sitm/ritm for entries which extend "screen", to work around
27217 # screen's hardcoded behavior for SGR 3 -TD
27220 # + modify sgr for screen.xterm-new to support dim capability -TD
27221 # + add dim capability to nsterm+7 -TD
27222 # + cancel dim capability for iterm -TD
27223 # + add dim, invis capabilities to vte-2012 -TD
27224 # + add sitm/ritm to konsole-base and mlterm3 -TD
27227 # + add xterm-1005 and xterm-1006 entries, with suggested extension
27228 # capability "xm" -TD
27231 # + update test-report for mrxvt -TD
27234 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
27237 # + reviewed terminology 0.6.1, add function key definitions. None of
27238 # the vt100-compatibility issues were improved -TD
27241 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
27242 # + add several key definitions to nsterm-bce to match preconfigured
27243 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
27246 # + remove unnecessary ';' from E3 capabilities -TD
27247 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
27248 # + split-out recent change to nsterm-bce as nsterm-build326, and add
27249 # nsterm-build342 to reflect changes with successive releases of OSX
27250 # (discussion with Leonardo B Schenkel)
27251 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
27255 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
27256 # + add several screen.XXX entries to support the respective variations
27257 # for 256 colors -TD
27260 # + add putty+fnkeys* building-block entries -TD
27263 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
27264 # + add vte-2014, update vte to use that -TD
27267 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
27268 # from xterm-new (report by Richard Birkett) -TD
27271 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
27272 # + fixes for st 0.5 from testing with tack -TD
27275 # + updated minitel entries to fix kel problem with emacs, and add
27276 # minitel1b-nb (Alexandre Montaron).
27277 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
27278 # + replace some dead URLs in commands with equivalents from the
27279 # Internet Archive -TD
27282 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
27283 # + add keys f12-f124 to pccon+keys (Tati Chevron).
27286 # + fix some inconsistencies in the pccon* entries -TD
27289 # + add viewdata (Alexandre Montaron).
27292 # + tidy up comments about hardcoded 256color palette (report by
27293 # Leonardo Brondani Schenkel) -TD
27294 # + add putty-noapp entry, and amend putty entry to use application mode
27295 # for better consistency with xterm (report by Leonardo Brondani
27299 # + add 'oc' capability to xterm+256color, allowing palette reset for
27303 # + modify linux2.6 entry to improve line-drawing -TD
27304 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
27307 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
27308 # reset palette using "oc" string as in linux -TD
27311 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
27312 # that could be returned -TD
27313 # + added a few capabilities fixed in recent vte -TD
27316 # + correct a typo in interix -TD
27319 # + updated minitel entries to use status line with screen(1), as well as
27320 # printing special G2 videotex chars like french accentuated glyph
27321 # using special cap XC= (patch by Alexandre Montaron).
27324 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
27325 # + correct rs2 string for vt100-nam -TD
27328 # + modify linux-16color to not mask dim, standout or reverse with the
27329 # ncv capability -TD
27330 # + add 0.1sec mandatory delay to flash capabilities using the VT100
27331 # reverse-video control -TD
27332 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
27333 # entry, to avoid conflict with the user-defined mapping. The reset
27334 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
27337 # + merge current st description (report by Harry Gindi) -TD
27340 # + modify flash capability for linux and wyse entries to put the delay
27341 # between the reverse/normal escapes rather than after -TD
27344 # + minor comment-fixes to help automate links to bug-urls -TD
27345 # + add dvtm, dvtm-256color -TD
27346 # + add settings corresponding to xterm-keys option to tmux entry to
27347 # reflect upcoming change to make that option "on" by default
27348 # (patch by Nicholas Marriott).
27349 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
27350 # + add dumb-emacs-ansi -TD
27353 # + correct a few spelling errors in comments -TD
27357 # + add vt100+4bsd building block, use that for older terminals rather
27358 # than "vt100" which is now mostly used as a building block for
27359 # terminal emulators -TD
27360 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
27361 # (report/analysis by Robert King) -TD
27364 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
27365 # + add smso for env230, to match sgr -TD
27366 # + remove p7/protect from sgr in fbterm -TD
27367 # + drop setf/setb from fbterm; setaf/setab are enough -TD
27368 # + make xterm-pcolor sgr consistent with other capabilities -TD
27369 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
27370 # (discussion with Nicholas Marriott)
27373 # + correct missing comma-separator between string capabilities in
27374 # icl6402 and m2-nam -TD
27375 # + update formatting with ncurses 6.0.20170422 -TD
27376 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
27377 # add alias ansiterm (report by Robert King).
27380 # + reformatted using hexadecimal numbers to improve readability -TD
27383 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
27384 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
27385 # + add "rep" to xterm-new, available since 1997/01/26 -TD
27386 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
27390 # + update "iterm" entry -TD
27391 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
27394 # + update notes on user-defined capabilities -TD
27397 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
27400 # + add "op" to xterm+256setaf -TD
27401 # + reviewed terminology 1.0.0 -TD
27402 # + reviewed st 0.7 -TD
27405 # + modify old terminology entry and a few other terminal emulators to
27406 # account for xon -TD
27407 # + correct sgr string for tmux, which used screen's "standout" code
27408 # rather than the standard code (patch by Roman Kagan)
27409 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
27410 # those correspond to the non-sgr settings where they differ, but
27411 # otherwise use ECMA-48 consistently:
27412 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
27413 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
27414 # st-0.7, vi603, vwmterm -TD
27417 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
27418 # blocks from xterm #331 -TD
27419 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
27421 # + modify xterm+256color and xterm+256setaf to use correct number of
27422 # color pairs, for ncurses 6.1 -TD
27423 # + add rs1 capability to xterm-256color -TD
27424 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
27425 # match xterm #272, reflecting packager's changes -TD
27426 # + remove "boolean" Se, Ss from st-0.7 -TD
27429 # + add konsole-direct and st-direct -TD
27430 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
27431 # direct-colors are wanted -TD
27434 # + add vte-direct -TD
27435 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
27439 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
27440 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
27441 # mode does not work with those programs. konsole is debatable -TD
27442 # + add "termite" entry (report by Markus Pfeiffer) -TD
27445 # + trim "XT" from screen entry -TD
27446 # + modify iterm to use xterm+sl-twm building block -TD
27447 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
27448 # konsole's removal in 2008 -TD
27449 # + expanded the history section of konsole to explain its flawed
27450 # imitation of xterm's keyboard -TD
27451 # + use xterm+x11mouse in screen.* entries because screen does not yet
27452 # support xterm's 1006 mode -TD
27453 # + add nsterm-build400 for macOS 10.13 -TD
27454 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
27455 # + update vte to vte-2017 -TD
27456 # + add ecma+strikeout to vte-2017 -TD
27457 # + add iterm2-direct -TD
27458 # + updated teraterm, added teraterm-256color -TD
27459 # + add mlterm-direct -TD
27460 # + add descriptions for ANSI building-blocks -TD
27463 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
27464 # + fix remaining flash capabilities with trailing mandatory delays -TD
27467 # + trim some redundant capabilities from st-0.7 -TD
27468 # + trim unnecessary setf/setb from interix -TD
27471 # + trim spurious whitespace from tmux in 2018-02-24 changes;
27472 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
27473 # (report by C Anthony Risinger)
27474 # + improve iterm2 using some xterm features which it has adapted -TD
27477 # + add acsc string to vi200 (Nibby Nebbulous)
27478 # add right/down-arrow to vi200's acsc -TD
27481 # + corrected acsc for wy50 -TD
27482 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
27483 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
27486 # + fix typo in tvi955 -TD
27487 # + corrected acsc for regent60 -TD
27488 # + add alias n7900 -TD
27491 # + corrected acsc for tvi950 -TD
27492 # + remove bogus kf0 from tvi950 -TD
27493 # + added function-key definitions to agree with TeleVideo 950 manual -TD
27494 # + add bel to tvi950 -TD
27495 # + add shifted function-keys to regent60 -TD
27496 # + renumber regent40 function-keys to match manual -TD
27497 # + add cd (clr_eos) to adds200 -TD
27500 # + add OpenGL clients alacritty and kitty -TD
27501 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
27504 # + fix a typo in comments (Aaron Gyes).
27505 # + add nsterm-build309 to replace nsterm-256color, assigning the latter
27506 # as an alias of nsterm, to make mouse work with nsterm-256color -TD
27507 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD
27510 # + add nsterm-direct -TD
27511 # + use SGR 1006 mouse for konsole-base -TD
27512 # + use SGR 1006 mouse for putty -TD
27513 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
27516 # + fix typo in adds200 -TD
27519 # + add "screen5", to mention italics (report by Stefan Assmann)
27520 # + modify description of xterm+x11hilite to eliminate unused p5 -TD
27523 # + update xterm-new to xterm patch #345 -TD
27524 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
27525 # + update terminator entry -TD
27526 # + remove hard-tabs from ti703 (report by Robert Clausecker)
27527 # + add Smol/Rmol for mintty, vte-2018 -Nicholas Marriott
27530 # + add rs1 to konsole, mlterm -TD
27533 # + add mintty, mintty-direct (Thomas Wolff)
27535 # + comment-out some user-defined capabilities in mintty+common to allow
27536 # builds with existing releases 5.9-6.1 -TD
27539 # + add ms-terminal -TD
27540 # + add vscode, vscode-direct -TD
27541 # + use ecma+index in screen, st -TD
27544 # + add domterm -TD
27545 # + improve comments for recent changes, add alias xterm.js -TD
27548 # + amend the change to screen, because tmux relies upon that entry
27549 # and does not support that feature (Debian #933572) -TD
27550 # + updated ms-terminal entry & notes -TD
27551 # + updated kitty entry & notes -TD
27552 # + updated alacritty+common entry & notes -TD
27553 # + use xterm+sl-twm for consistency -TD
27556 # + correct a comment -TD
27559 # + modify linux-16color to accommodate Linux console driver change in
27560 # early 2018 (report by Dino Petrucci).
27563 # + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
27566 # + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
27567 # with old non-curses programs -TD
27568 # + reviewed st 0.8.2, updated some details -TD
27569 # + use ansi+rep several places -TD
27572 # + update alacritty entries for 0.4.0 (prompted by patch by
27573 # Christian Duerr) -TD
27576 # + spelling fixes per codespell -TD
27577 # + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD
27580 # + improve vt50h and vt52 based on DECScope manual -TD
27581 # + add/use vt52+keypad and vt52-basic -TD
27584 # + use vt52+keypad in xterm-vt52, from xterm #354 -TD
27587 # + use vt100+fnkeys in putty -TD
27590 # + add details on the change to Linux SGR 21 in 2018 -TD
27591 # + add xterm-direct16 and xterm-direct256 -TD
27594 # + fix some dead URLs -TD
27597 # + update notes on vscode / xterm.js -TD
27600 # + re-enable "bel" in konsole-base (report by Nia Huang)
27601 # + add linux-s entry (patch by Alexandre Montaron).
27604 # + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage
27605 # in xterm+256color, xterm+88color -TD
27606 # + add shifted Linux console keys in linux+sfkeys entry for
27607 # screen.linux (report by Alexandre Montaron).
27608 # + use vt100+enq in screen (report by Alexandre Montaron).
27609 # + add screen.linux-s alias (suggested by Alexandre Montaron).
27612 # + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo
27616 # + correct icl6404 csr (report by Florian Weimer).
27617 # + correct ti916 cup (report by Florian Weimer).
27618 # + improve ndr9500 (report by Florian Weimer).
27621 # + correct description of vt330/vt340 (Ross Combs).
27624 # + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch).
27627 # + add tmux-direct (tmux #2370)
27628 # + simplify mlterm initialization with DECSTR -TD
27629 # + change tmux's kbs to ^? (report by Premysl Eric Janouch)
27632 # + correct sgr in aaa+rv (report by Florian Weimer) -TD
27633 # + fix some sgr inconsistencies in d230c, ibm6153, ibm6154,
27637 # + expanded notes about tek4107 -TD
27640 # + update kitty+common -TD
27641 # + add putty+screen and putty-screen (suggested by Alexandre Montaron).
27644 # + add Smulx to alacritty (Christian Duerr).
27645 # + add rep to PuTTY -TD
27646 # + add putty+keypad -TD
27649 # + correct mlterm3 kf1-kf4 (Debian #975322) -TD
27650 # + add flash to mlterm3 -TD
27653 # + update terminology to 1.8.1 -TD
27656 # + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS
27657 # (report by Patrick McDermott) -TD
27660 # + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD
27661 # + add vt220-base, for terminal emulators which generally have not
27662 # supported att610's blinking cursor control -TD
27663 # + use vt220+cvis in vt220, etc -TD
27664 # + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD
27665 # + use vt220+cvis in st, terminology, termite since they ignore
27666 # blinking-cursor detail in att610+cvis -TD
27669 # + add/use vt220+pcedit and vt220+vtedit -TD
27670 # + add scrt/securecrt and absolute -TD
27671 # + add nel to xterm-new, though supported since X11R5 -TD
27672 # + add/use xterm+nofkeys -TD
27673 # + move use of ecma+italics from xterm-basic to xterm+nofkeys -TD
27676 # + remove a duplicate "use" in xterm-vt220 -TD
27679 # + correct use-ordering in some xterm-direct flavors -TD
27682 # + add hterm, hterm-256color (Mike Frysinger)
27685 # + use default colors in pccon "op" -TD
27686 # + correct rmacs/smacs in aaa+dec, aaa+rv -TD
27687 # + add hpterm-color2 and hp98550-color (Martin Trusler)
27690 # + correct typo in "vip" comments (report by Nick Black), reviewed this
27691 # against Glink manual -TD
27692 # + fill in some missing pieces for pccon, to make it comparable to the
27696 # + trim "flash" from pccon+base -TD
27697 # + revert change for aaa+rv -TD
27698 # + add workaround for Windows Terminal's problems with CR/LF mapping to
27699 # ms-terminal (patch by Juergen Pfeifer).
27700 # + review/update current Windows Terminal vs ms-terminal -TD
27703 # + add extensions in xterm+tmux and ecma+strikeout to ms-terminal,
27704 # but cancel the non-working Cr and Ms capabilities -TD
27705 # + add foot and foot-direct -TD
27708 # + fix missing "%d" for setaf/setab code 8-15 in xterm+direct16 (report
27709 # by Florian Weimer) -TD
27712 # + corrected tsl capability for terminator -TD
27715 # + modify linux3.0 entry to reflect default mapping of shift-tab by
27716 # kbd 1.14 (report by Jan Engelhardt) -TD
27719 # + add testing note for xterm-{hp|sco|sun} -TD
27720 # + corrected description for ansi.sys-old -TD
27721 # + add xterm+nopcfkeys, to fill in keys for xterm-hp, xterm-sun -TD
27722 # + use hp+arrows in a few places -TD
27723 # + use hp+pfk-cr in a few places -TD
27726 # + add kbeg to xterm+keypad to accommodate termcap applications -TD
27727 # + add smglp and smgrp to vt420+lrmm, to provide useful data for the
27728 # "tabs" +m option -TD
27731 # + fill in some details for infoton -TD
27732 # + fix spelling/consistency in several descriptions -TD
27733 # + use vt420+lrmm in vt420 -TD
27736 # + trim some redundant definitions -TD
27739 # + add xterm+sl-alt, use that in foot+base (report by Jonas Grosse
27743 # + add dim, ecma+strikeout to st-0.6 -TD
27746 # + fix errata in description fields (report by Eric Lindblad) -TD
27747 # + add x10term+sl, aixterm+sl, ncr260vp+sl, ncr260vp+vt, wyse+sl -TD
27750 # + update kitty -TD
27753 # + add xterm+acs building-block -TD
27754 # + add xterm-p370, for use in older terminals -TD
27755 # + add dec+sl to xterm-new, per patch #371 -TD
27756 # + add mosh and mosh-256color -TD
27760 # + correct setal in mintty/tmux entries, add to vte-2018 (report by
27762 # + add blink to vte-2018 (report by Robert Lange)
27765 # + update teken -TD
27766 # + add teken-16color, teken-vt and teken-sc -TD
27767 # + add a few missing details for vte-2018 (report by Robert Lange) -TD
27770 # + make description-fields distinct -TD
27773 # + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and
27774 # also provide for focus in/out responses -TD
27777 # + expanded notes for teken/syscons -TD
27780 # + remove u6-u9 from teken-2018 -TD
27781 # + set "xterm-new" to "xterm-p370", add "xterm-p371" -TD
27784 # + revise kon/kon2/jfbterm to undo "linux2.6" change to
27785 # smacs/rmacs/enacs (Debian #1012800) -TD
27786 # + amended note for att610+cvis0, as per documentation for att610,
27787 # att620, att730 -TD
27790 # + correct dsl in dec+sl (report by Rajeev Pillai) -TD
27791 # + add/use ansi+cpr, decid+cpr -TD
27794 # + use NQ to flag entries where the terminal does not support query and
27796 # + use ansi+enq and decid+cpr in cases where the terminal probably
27797 # supported the u6-u9 extension -TD
27798 # + add/use apollo+vt132, xterm+alt47 -TD
27801 # + modify nsterm to use xterm+alt1049 (report by Paul Handly) -TD
27802 # + modify putty to use xterm+alt1049 -TD
27805 # + add/use bracketed+paste to help identify terminals supporting this
27806 # xterm feature (prompted by discussion with Bram Moolenaar) -TD
27809 # + correct PS vs PE names in bracketed+paste (report by Bram Moolenaar)
27813 # + add comment to bracketed+paste explaining that vim patch 9.0.1117 is
27814 # needed for use with the updated xterm descriptions (suggested by Bram
27816 # + add RV report+version (suggested by Bram Moolenaar).
27819 # + change RV to XR/xr, to avoid conflict with pre-existing usage in vim,
27820 # to use RV/rv to denote DA2 and its response (discussion with Bram
27822 # + add XF flag to xterm+focus so that termcap applications can be aware
27823 # of terminals which may support focus in/out -TD
27824 # + use xterm+focus in xterm-p370 and tmux -TD
27827 # + document XF, kxIN and kxOUT -TD
27828 # + add note on sun/wscons/cmdtool/shelltool -TD
27831 # + remove DECCOLM+DECSCLM from foot (patch by Daniel Ekloef).
27834 # + add xterm+focus to alacritty+common (patch by Christian Duerr).
27837 # + add mode 1004 to xterm+sm+1006 from xterm #380 -TD
27840 # + add xterm+focus to foot+base (patch by Daniel Ekloef).
27843 # + add linux+kbs for terminals which imitate xterm's behavior with
27847 # + mention E3 in regard to user_caps(5) -TD
27850 # + add/use putty+cursor to reflect amending of modified cursor-keys in
27852 # + add ecma+strikeout to putty -TD
27854 ######## SHANTIH! SHANTIH! SHANTIH!