1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2008/04/29 00:49:41 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+pp|ansi printer port,
380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The IBM PC alternate character set. Plug this into any Intel console entry.
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386 # ROM graphics for control characters such as the diamond, up- and down-arrow.
387 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
388 # will work with any Intel console, they all seem to have inherited \E[11m
389 # from the ANSI.SYS de-facto standard.
390 klone+acs|alternate character set for ansi.sys displays,
391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392 rmacs=\E[10m, smacs=\E[11m,
394 # Highlight controls corresponding to the ANSI.SYS standard. Most
395 # console drivers for Intel boxes obey these. Makes the same assumption
396 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
397 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398 klone+sgr|attribute control for ansi.sys displays,
399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400 rmso=\E[m, rmul=\E[m,
401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
405 # Most Intel boxes do not treat "invis" (invisible) text.
406 klone+sgr8|attribute control for ansi.sys displays,
408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
411 # Highlight controls corresponding to the ANSI.SYS standard. *All*
412 # console drivers for Intel boxes obey these. Does not assume \E[11m will
413 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414 # diamond and arrow characters under curses.
415 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
422 # KOI8-R (RFC1489) acs (alternate character set)
423 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426 rmacs=\E[10m, smacs=\E[11m,
428 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
429 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
430 # but equivalent strings that don't rely on that coincidence:
431 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434 # They match a subset of ECMA-48.
435 klone+color|color control for ansi.sys and ISO6429-compatible displays,
436 colors#8, ncv#3, pairs#64,
437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
439 # This is better than klone+color, it doesn't assume white-on-black as the
440 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
441 ecma+color|color control for ECMA-48-compatible terminals,
443 colors#8, ncv#3, pairs#64,
444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
446 # Attribute control for ECMA-48-compatible terminals
447 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
450 # For comparison, here are all the capabilities implied by the Intel
451 # Binary Compatibility Standard (level 2) that fit within terminfo.
452 # For more detail on this rather pathetic standard, see the comments
453 # near the end of this file.
454 ibcs2|Intel Binary Compatibility Standard prescriptions,
455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
456 cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
457 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
458 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
459 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
460 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
462 #### ANSI/ECMA-48 terminals and terminal emulators
464 # See near the end of this file for details on ANSI conformance.
465 # Don't mess with these entries! Lots of other entries depend on them!
467 # This section lists entries in a least-capable to most-capable order.
468 # if you're in doubt about what `ANSI' matches yours, try them in that
469 # order and back off from the first that breaks.
471 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
472 # and more than one page of memory. It uses local motions instead of
473 # direct cursor addressing, and makes almost no assumptions. It does
474 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
475 ansi-mr|mem rel cup ansi,
477 cols#80, lines#24, use=vanilla, use=ansi+erase,
480 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
481 # beware of screen size problems and memory relative cursor addressing.
482 ansi-mini|any ansi terminal with pessimistic assumptions,
484 cols#80, lines#24, use=vanilla, use=ansi+cup,
487 # ansi-mtabs adds relative addressing and minimal tab support
488 ansi-mtabs|any ansi terminal with pessimistic assumptions,
490 ht=^I, use=ansi+local1, use=ansi-mini,
492 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
494 # The following is an entry for the full ANSI 3.64 (1977). It lacks
495 # padding, but most terminals using the standard are "fast" enough
496 # not to require any -- even at 9600 bps. If you encounter problems,
497 # try including the padding specifications.
499 # Note: the :as: and :ae: specifications are not implemented here, for
500 # the available termcap documentation does not make clear WHICH alternate
501 # character set to specify. ANSI 3.64 seems to make allowances for several.
502 # Please make the appropriate adjustments to fit your needs -- that is
503 # if you will be using alternate character sets.
505 # There are very few terminals running the full ANSI 3.64 standard,
506 # so I could only test this entry on one verified terminal (Visual 102).
507 # I would appreciate the results on other terminals sent to me.
509 # Please report comments, changes, and problems to:
511 # U.S. MAIL: Hugh Hansard
514 # Atlanta, GA. 30322.
516 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
518 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
519 ansi77|ansi 3.64 standard 1977 version,
521 cols#80, it#8, lines#24,
522 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
523 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
524 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
525 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
527 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
528 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
529 smso=\E[7m, smul=\E[4m,
531 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
532 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
533 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
534 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
535 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
536 # to confuse many emulators. On the other hand, we can count on these programs
537 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
538 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
539 # ANSI.SYS influence.
540 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
541 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
543 cols#80, it#8, lines#24,
544 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
545 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
546 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
547 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
548 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
550 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
551 lines#25, use=pcansi-m,
552 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
553 lines#33, use=pcansi-m,
554 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
555 lines#43, use=pcansi-m,
556 # The color versions. All PC emulators do color...
557 pcansi|ibm-pc terminal programs claiming to be ansi,
558 use=klone+color, use=pcansi-m,
559 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
560 lines#25, use=pcansi,
561 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
562 lines#33, use=pcansi,
563 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
564 lines#43, use=pcansi,
566 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
567 # If you want pound signs rather than dollars, replace `B' with `A'
568 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
569 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
570 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
572 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
573 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
574 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
575 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
576 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
577 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
578 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
579 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
580 vpa=\E[%i%p1%dd, use=pcansi-m,
582 ansi+enq|ncurses extension for ANSI ENQ,
583 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
586 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
587 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
588 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
589 ansi|ansi/pc-term compatible with color,
590 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
592 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
593 # all the normal ANSI stuff with no extensions. It assumes
594 # insert/delete line/char is there, so it won't work with
595 # vt100 clones. It assumes video attributes for bold, blink,
596 # underline, and reverse, which won't matter much if the terminal
597 # can't do some of those. Padding is assumed to be zero, which
598 # shouldn't hurt since xon/xoff is assumed.
599 ansi-generic|generic ansi standard terminal,
601 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
602 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
603 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
604 use=ansi+sgrbold, use=ansi+arrows,
606 #### DOS ANSI.SYS variants
608 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
609 # documentation (except for the keyboard key reassignment feature, which
610 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
611 # though undocumented. The <pfkey> capability is untested but should work for
612 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
613 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
614 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
615 OTbs, am, mir, msgr, xon,
617 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
618 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
619 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
620 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
621 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
622 u7=\E[6n, use=klone+color, use=klone+sgr8,
623 ansi.sys|ANSI.SYS 3.1 and later versions,
624 el=\E[K, use=ansi.sys-old,
627 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
628 # This should only be used when the terminal emulator cannot redefine the keys.
629 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
630 # definitions must be restored. If the terminal emulator is quit while in vi
631 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
632 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
633 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
634 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
635 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
636 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
637 # Consequently the End keypad key could not be set (it is relatively safe and
638 # actually useful because it sends ^@ O, which beeps and opens a line above).
639 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
640 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
641 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
642 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
645 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
646 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
647 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
648 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
651 # See ansi.sysk and nansi.sys above.
652 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
653 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
654 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
657 #### ANSI console types
662 # BeOS entry for Terminal program Seems to be almost ANSI
663 beterm|BeOS Terminal,
664 am, eo, mir, msgr, xenl, xon,
665 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
666 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
667 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
668 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
669 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
670 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
671 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
672 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
673 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
674 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
675 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
676 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
677 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
678 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
679 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
680 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
681 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
682 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
683 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
684 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
690 # This entry is good for the 1.2.13 or later version of the Linux console.
692 # ***************************************************************************
695 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
696 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
697 # * character. Here are the keymap replacement lines that will set this up: *
699 # keycode 15 = Tab Tab
700 # alt keycode 15 = Meta_Tab
701 # shift keycode 15 = F26
702 # string F26 ="\033[Z"
704 # * This has to use a key slot which is unfortunate (any unused one will *
705 # * do, F26 is the higher-numbered one). The change ought to be built *
706 # * into the kernel tables. *
708 # ***************************************************************************
710 # All linux kernels since 1.2.13 (at least) set the screen size
711 # themselves; this entry assumes that capability.
713 linux-basic|linux console,
714 am, bce, eo, mir, msgr, xenl, xon,
716 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
717 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
718 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
719 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
720 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
721 el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
722 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
723 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
724 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
725 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
726 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
727 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
728 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
729 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
730 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
731 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
732 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
733 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
734 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
735 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
738 linux-m|Linux console no color,
740 setab@, setaf@, setb@, setf@, use=linux,
742 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
743 # and it matters, turn off <ccc>. The %02x escape used to implement this is
744 # not supposedly back-portable to older SV curses (although it has worked fine
745 # on Solaris for several years) and not supported in ncurses versions before
747 linux-c-nc|linux console with color-change,
749 initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
750 oc=\E]R, use=linux-basic,
751 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
752 linux-c|linux console 1.3.6+ for older ncurses,
754 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
755 oc=\E]R, use=linux-basic,
757 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
758 # get a block cursor for cvvis.
759 # reported by Frank Heckenbach <frank@g-n-u.de>.
761 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
762 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
764 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
765 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
766 ich@, ich1@, use=linux,
768 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
769 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
770 linux-koi8|linux with koi8 alternate character set,
771 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
772 use=linux, use=klone+koi8acs,
774 # Another entry for KOI8-r with Qing Long's acsc.
775 # (which one better complies with the standard?)
776 linux-koi8r|linux with koi8-r alternate character set,
777 use=linux, use=klone+koi8acs,
779 # Entry for the latin1 and latin2 fonts
780 linux-lat|linux with latin1 or latin2 alternate character set,
781 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
784 # This uses graphics from VT codeset instead of from cp437.
785 # reason: cp437 (aka "straight to font") is not functional under luit.
786 # from: Andrey V Lukyanov <land@long.yar.ru>.
787 linux-vt|linux console using VT codes for graphics,
788 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
789 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
792 # This is based on the Linux console (relies on the console to perform some
793 # of the functionality), but does not recognize as many control sequences.
794 # The program comes bundled with an old (circa 1998) copy of the Linux
795 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
796 # \E* move cursor to home, as as \E[H
798 # \EE move cursor to beginning of row
799 # \E[y,xf same as \E[y,xH
801 # Note: The status-line support is buggy (dsl does not work).
802 kon|kon2|jfbterm|Kanji ON Linux console,
804 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
805 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
811 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
814 cols#80, it#8, lines#25,
815 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
816 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
817 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
818 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
819 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
820 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
821 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
822 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
823 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
824 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
825 smso=\E[7m, smul=\E[4m,
826 mach-bold|Mach Console with bold instead of underline,
827 rmul=\E[0m, smul=\E[1m, use=mach,
828 mach-color|Mach Console with ANSI color,
830 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
833 # From: Marcus Brinkmann
834 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
836 # Comments in the original are summarized here:
838 # hurd uses 8-bit characters (km).
840 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
842 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
843 # have the eat_newline_glitch. It doesn't support setting or removing tab
846 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
847 # one byte instead three.
849 # <ich1> is not included because hurd has insert mode.
851 # hurd doesn't use ^J for scrolling, because this could put things into the
854 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
855 # This is a GNU extension.
857 # The original has commented-out ncv, but is restored here.
859 # Reading the source, RIS resets cnorm, but not xmous.
860 hurd|The GNU Hurd console server,
861 am, bce, bw, eo, km, mir, msgr, xon,
862 colors#8, it#8, ncv#18, pairs#64,
863 acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
864 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
865 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
866 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
867 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
868 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
869 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
870 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
871 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
872 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
873 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
874 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
875 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
876 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
877 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
878 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
879 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
880 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
881 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
882 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
883 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
884 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
885 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
886 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
887 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
893 # OSF/1 1.1 Snapshot 2
894 pmcons|pmconsole|PMAX console,
897 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
898 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
899 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
901 # SCO console and SOS-Syscons console for 386bsd
902 # (scoansi: had unknown capabilities
903 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
904 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
905 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
906 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
907 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
908 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
909 # on the <smacs>=\E[12m -- esr)
911 # klone+sgr-dumb is an error since the acsc does not match -TD
913 # In this description based on SCO's keyboard(HW) manpage list of default
914 # function key values:
915 # F13-F24 are shifted F1-F12
916 # F25-F36 are control F1-F12
917 # F37-F48 are shift+control F1-F12
919 # hpa/vpa work in the console, but not in scoterm:
923 # SCO's terminfo uses
926 # which do not work (console or scoterm).
928 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
929 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
930 OTbs, am, bce, eo, xon,
931 colors#8, cols#80, it#8, lines#25, pairs#64,
932 acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
933 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
934 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
935 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
936 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
937 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
938 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
939 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
940 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
941 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
942 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
943 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
944 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
945 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
946 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
947 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
948 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
949 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
950 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
951 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
952 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
953 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
954 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
955 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
956 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
957 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
958 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
960 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
961 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
962 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
963 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
964 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
965 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
966 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
967 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
968 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
970 # make this easy to change...
971 scoansi|SCO Extended ANSI standard crt,
974 # This actually describes the generic SVr4 display driver for Intel boxes.
975 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
976 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
977 att6386|at386|386at|AT&T WGS 6386 console,
979 cols#80, it#8, lines#25,
980 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
981 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
982 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
983 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
984 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
985 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
986 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
987 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
988 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
989 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
990 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
991 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
992 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
993 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
994 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
995 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
997 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
998 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
999 tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
1000 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1001 pc6300plus|AT&T 6300 plus,
1004 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1005 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1006 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1007 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1008 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1009 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1010 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1011 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1012 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1013 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1015 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1017 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1018 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1019 # is broken. All the special key sequences are broken, making it unusable
1020 # with Emacs. The problem stems from the following:
1022 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1023 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1024 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1025 # uses resizable terminal windows, but the bundled terminal program always
1026 # uses an 80x24 window (and doesn't support seem to support a 132-column
1029 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1030 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1031 # access method".) tam includes support for real, overlapping windows,
1032 # onscreen function key labels, and bitmap graphics. But since the primary
1033 # user interface on the UNIX PC was a GUI program (ua, for "user
1034 # assistant",) and remote administration was considered important for the
1035 # machine, tam also supported VT100-compatible terminals attached to the
1036 # serial port or used across the StarLan network. To simulate the extra keys
1037 # not present on a VT100, users could press ESC and a two-letter sequence,
1038 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1039 # however, were not the same as those sent by the actual Undo key. The
1040 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1041 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1042 # have the full documentation and several programs which use tam. It also
1043 # used an extended terminfo format to describe key sequences, special
1044 # highlighting modes, etc.)
1046 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1047 # there are two sequences for every key-modifier combination (local keyboard
1048 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1049 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1050 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1051 # seem to have been built from the manual describing the VT100 sequences.
1052 # This means it doesn't work for a real live UNIX PC.
1054 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1055 # character set". Rather than the VT100 graphics you might expect, it allows
1056 # up to 8 custom fonts to be loaded at any given time. This means that
1057 # programs expecting VT100 graphics will usually be disappointed. For this
1058 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1059 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1060 # manpage), should you wish to do so:
1062 # SGR10 - Select font 0 - ESC [ 10 m or SO
1063 # SGR11 - Select font 1 - ESC [ 11 m or SI
1064 # SGR12 - Select font 2 - ESC [ 12 m
1066 # SGR17 - Select font 7 - ESC [ 17 m
1068 # Graphics for line drawing are not reliably found at *any* character
1069 # location because the UNIX PC has dynamically reloadable fonts. I use font
1070 # 0 for regular text and font 1 for italics, but this is by no means
1071 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1073 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1074 # distributed terminfo.
1076 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1077 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1078 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1079 # attached by serial cable. In Emacs, even the Undo key works, and many
1080 # applications can now use the F1-F8 keys.
1083 # Terminfo entry for the AT&T Unix PC 7300
1084 # from escape(7) in Unix PC 7300 Manual.
1085 # Somewhat similar to a vt100-am (but different enough
1086 # to redo this from scratch.)
1088 # /***************************************************************
1090 # * FONT LOADING PROGRAM FOR THE UNIX PC
1092 # * This routine loads a font defined in the file ALTFONT
1093 # * into font memory slot #1. Once the font has been loaded,
1094 # * it can be used as an alternative character set.
1096 # * The call to ioctl with the argument WIOCLFONT is the key
1097 # * to this routine. For more information, see window(7) in
1098 # * the PC 7300 documentation.
1099 # ***************************************************************/
1100 # #include <string.h> /* needed for strcpy call */
1101 # #include <sys/window.h> /* needed for ioctl call */
1102 # #define FNSIZE 60 /* font name size */
1103 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1105 # * The file /usr/lib/wfont/special.8.ft comes with the
1106 # * standard PC software. It defines a graphics character set
1107 # * similar to that of the Teletype 5425 terminal. To view
1108 # * this or other fonts in /usr/lib/wfont, use the command
1109 # * cfont <filename>. For further information on fonts see
1110 # * cfont(1) in the PC 7300 documentation.
1113 # struct altfdata /* structure for alt font data */
1115 # short altf_slot; /* memory slot number */
1116 # char altf_name[FNSIZE]; /* font name (file name) */
1120 # int wd; /* window in which altfont will be */
1121 # struct altfdata altf;
1123 # strcpy(altf.altf_name,ALTFONT);
1124 # for (wd =1; wd < 12; wd++) {
1125 # ioctl(wd, WIOCLFONT,&altf);
1129 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1130 # they're confirmed by the man page for the System V display---esr)
1132 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1134 cols#80, it#8, lines#24,
1135 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1136 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1137 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1138 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1139 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1140 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1141 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1142 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1143 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1144 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1145 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1146 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1147 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1148 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1149 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1150 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1151 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1152 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1153 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1154 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1155 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1156 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1159 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1160 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1161 # for the application keypad mode. We have added iris-ansi-ap rather than
1162 # change the original to keypad mode.
1164 # (iris-ansi: added rmam/smam based on init string -- esr)
1166 # This entry, and those derived from it, is used in xwsh (also known as
1167 # winterm). Some capabilities that do not fit into the terminfo model
1168 # include the shift- and control-functionkeys:
1170 # F1-F12 generate different codes when shift or control modifiers are used.
1174 # control-F1 \E[025q
1176 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1177 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1179 # The cursor keys also have different codes:
1180 # control-up \E[162q
1181 # control-down \E[165q
1182 # control-left \E[159q
1183 # control-right \E[168q
1186 # shift-down \E[164q
1187 # shift-left \E[158q
1188 # shift-right \E[167q
1190 # control-tab \[072q
1192 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1194 cols#80, it#8, lines#40,
1195 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1196 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1197 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1198 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1199 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1200 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1201 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1202 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1203 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1204 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1205 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1206 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1207 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1208 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1209 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1210 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1211 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1212 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1213 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1215 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1216 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1217 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1219 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1220 # (T.Dickey 98/1/24)
1221 iris-color|xwsh|IRIX ANSI with color,
1223 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1224 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1225 rmul=\E[24m, rs1=\Ec,
1226 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1227 sitm=\E[3m, use=vt100+enq, use=klone+color,
1230 # The following is a version of the ibm-pc entry distributed with PC/IX,
1231 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1232 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1233 # (the former is untrue, and the latter failed under UCB/man); standout and
1234 # underline modes have been added. Note: this entry describes the "native"
1235 # capabilities of the PC monochrome display, without ANY emulation; most
1236 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1240 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1241 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1242 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1245 # (ibmpcx: this entry used to be known as ibmx.
1246 # It formerly included the following extension capabilities:
1247 # :GC=b:GL=v:GR=t:RT=^J:\
1248 # :GH=\E[196g:GV=\E[179g:\
1249 # :GU=\E[193g:GD=\E[194g:\
1250 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1251 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1252 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1253 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1254 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1255 # what was there before. -- esr)
1256 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1259 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1260 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1261 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1262 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1263 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1264 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1270 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1271 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1272 # right corner without triggering a scroll. The ncurses terminfo library can
1273 # handle this case with the <ich1> capability, and prefers <am> for better
1274 # optimization. Bug: The <op> capability resets attributes.
1275 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1276 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1277 qnx|qnx4|qnx console,
1278 daisy, km, mir, msgr, xhpa, xt,
1279 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1280 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1281 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1282 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1283 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1284 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1285 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1286 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1287 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1288 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1289 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1290 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1291 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1292 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1293 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1294 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1295 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1296 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1297 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1298 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1299 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1300 kext=\377\270, kf1=\377\201, kf10=\377\212,
1301 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1302 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1303 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1304 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1305 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1306 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1307 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1308 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1309 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1310 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1311 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1312 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1313 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1314 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1315 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1316 khlp=\377\350, khome=\377\240, khts=\377\342,
1317 kich1=\377\253, kil1=\377\273, kind=\377\261,
1318 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1319 knp=\377\252, knxt=\377\312, kopn=\377\357,
1320 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1321 kprv=\377\302, krdo=\377\336, kref=\377\354,
1322 kres=\377\360, krfr=\377\347, kri=\377\271,
1323 krmir=\377\313, krpl=\377\362, krst=\377\352,
1324 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1325 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1326 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1327 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1328 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1332 qnxt|qnxt4|QNX4 terminal,
1335 qnxm|QNX4 with mouse events,
1337 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1338 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1339 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1340 smicm=\E/>2h, use=qnx4,
1345 # Monochrome QNX4 terminal or console. Setting this terminal type will
1346 # allow an application running on a color console to behave as if it
1347 # were a monochrome terminal. Output will be through stdout instead of
1348 # console writes because the term routines will recognize that the
1349 # terminal name starts with 'qnxt'.
1351 qnxtmono|Monochrome QNX4 terminal or console,
1355 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1356 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1357 # (TD: derive from original qnx4 entry)
1358 qnxt2|qnx 2.15 serial terminal,
1360 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1361 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1363 # QNX ANSI terminal definition
1366 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1367 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
1368 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1369 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1370 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1371 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1372 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1373 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1374 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1375 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1376 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1377 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1378 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1379 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1380 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1381 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1382 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1383 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1384 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1385 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1386 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1387 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1388 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1389 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1390 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1391 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1392 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1393 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1394 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1395 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1396 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1397 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1398 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1399 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1400 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1401 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1402 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1403 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1404 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1405 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1406 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1407 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1408 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1409 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1410 smul=\E[4m, tbc=\E[2g,
1411 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1413 qansi|QNX ansi with console writes,
1414 daisy, xhpa, use=qansi-g,
1416 qansi-t|QNX ansi without console writes,
1419 qansi-m|QNX ansi with mouse,
1421 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1422 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1423 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1424 smicm=\E[>2h, use=qansi,
1426 qansi-w|QNX ansi for windows,
1429 #### NetBSD consoles
1431 # pcvt termcap database entries (corresponding to release 3.31)
1432 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1434 # (For the terminfo master file, I translated these into terminfo syntax.
1435 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1436 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1437 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1439 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1440 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1441 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1442 pcvtXX|pcvt vt200 emulator (DEC VT220),
1443 am, km, mir, msgr, xenl,
1445 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1446 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1447 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1448 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1449 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1450 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1451 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1452 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1453 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1454 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1455 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1456 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1457 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1458 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1459 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1460 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1461 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1462 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1463 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1464 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1466 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1467 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1468 # 50 lines entries; 80 columns
1469 pcvt25|dec vt220 emulation with 25 lines,
1471 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1472 pcvt28|dec vt220 emulation with 28 lines,
1474 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1475 pcvt35|dec vt220 emulation with 35 lines,
1477 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1478 pcvt40|dec vt220 emulation with 40 lines,
1480 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1481 pcvt43|dec vt220 emulation with 43 lines,
1483 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1484 pcvt50|dec vt220 emulation with 50 lines,
1486 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1488 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1489 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1490 # 50 lines entries; 132 columns
1491 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1493 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1494 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1496 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1497 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1499 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1500 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1502 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1503 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1505 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1506 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1508 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1510 # OpenBSD implements a color variation
1511 pcvt25-color|dec vt220 emulation with 25 lines and color,
1513 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1514 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1515 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1516 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1517 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1520 # Terminfo entries to enable the use of the ncurses library in colour on a
1521 # NetBSD-arm32 console (only tested on a RiscPC).
1522 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1523 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1524 # typo in invis - TD
1525 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1526 am, bce, msgr, xenl, xon,
1527 cols#80, it#8, lines#30,
1528 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1529 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1530 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1531 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1532 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1533 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1534 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1535 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1536 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1537 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1538 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1539 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1540 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1541 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1542 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1544 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1545 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1546 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1549 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1550 cols#132, lines#50, use=arm100,
1552 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1553 # manufactured by Sharp for the Japenese market.
1554 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1555 x68k|x68k-ite|NetBSD/x68k ITE,
1557 kclr=\E[9~, khlp=\E[28~, use=vt220,
1560 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1562 # (still unfinished, but good enough so far.)
1563 ofcons|DNARD OpenFirmware console,
1566 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1567 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1568 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1569 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1570 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1571 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1572 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1573 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1574 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1575 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1576 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1577 rmso=\2330m, rmul=\2330m,
1578 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1581 # NetBSD "wscons" emulator in vt220 mode.
1582 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1583 # The emulator renders underlined text in red. Colors are otherwise usable.
1585 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1586 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1587 # vt220 screens in vttest do not work with this emulator. For instance, it
1588 # identifies itself (primary DA response) as a vt220 with selective erase. But
1589 # the selective erase feature does not work. The secondary response is copied
1590 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1591 # the level of detail in a termcap, it is a passable emulator, since ECH does
1592 # work. Don't use it on a VMS system -TD
1593 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1595 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1596 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1597 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1598 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1599 kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
1600 setaf=\E[3%p1%dm, use=vt220,
1602 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1605 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1607 rcons|BSD rasterconsole,
1609 # Color version of above. Color currently only provided by NetBSD.
1610 rcons-color|BSD rasterconsole with ANSI color,
1613 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1615 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1616 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1617 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1618 # -- compare with cons25w
1620 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1621 colors#8, cols#80, it#8, lines#18, pairs#64,
1622 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1623 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1624 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1625 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1626 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1627 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1628 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1629 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1630 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1631 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1632 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1633 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1634 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1635 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1636 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1637 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1639 #### FreeBSD console entries
1641 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1642 # Andrey Chernov maintains the FreeBSD termcap distributions.
1644 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1645 # or comment out the :cb: capability in the console entry.
1647 # Alexander Lukyanov reports:
1648 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1649 # Now el1 clears not only to the line beginning, but also a large chunk
1650 # of previous line. But there is another bug - ech does not work at all.
1654 # common entry without semigraphics
1655 # Bug: The <op> capability resets attributes.
1656 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1657 # instance el1 does if the cursor is moved to the right margin first. Removed
1658 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1660 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1661 # Note that this disables standout with color.
1663 # The emulator sends difference strings based on shift- and control-keys,
1665 # F13-F24 are shifted F1-F12
1666 # F25-F36 are control F1-F12
1667 # F37-F48 are shift+control F1-F12
1668 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1669 am, bce, bw, eo, msgr, npc,
1670 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1671 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1672 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1673 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1674 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1675 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1676 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1677 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1678 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1679 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1680 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1681 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1682 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1683 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1684 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1685 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1686 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1687 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1688 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1689 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1690 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1691 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1692 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1693 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1694 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1695 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1696 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1697 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1699 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1701 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1702 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1703 smul=\E[4m, use=cons25,
1704 cons30|ansi80x30|freebsd console (30-line ansi mode),
1705 lines#30, use=cons25,
1706 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1707 lines#30, use=cons25-m,
1708 cons43|ansi80x43|freebsd console (43-line ansi mode),
1709 lines#43, use=cons25,
1710 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1711 lines#43, use=cons25-m,
1712 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1713 lines#50, use=cons25,
1714 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1715 lines#50, use=cons25-m,
1716 cons60|ansi80x60|freebsd console (60-line ansi mode),
1717 lines#60, use=cons25,
1718 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1719 lines#60, use=cons25-m,
1720 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1721 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1723 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1725 op@, rmul=\E[m, setab@, setaf@,
1726 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1727 smul=\E[4m, use=cons25r,
1728 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1729 lines#50, use=cons25r,
1730 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1731 lines#50, use=cons25r-m,
1732 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1733 lines#60, use=cons25r,
1734 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1735 lines#60, use=cons25r-m,
1736 # ISO 8859-1 FreeBSD console
1737 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1738 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1740 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1742 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1743 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1744 smul=\E[4m, use=cons25l1,
1745 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1746 lines#50, use=cons25l1,
1747 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1748 lines#50, use=cons25l1-m,
1749 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1750 lines#60, use=cons25l1,
1751 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1752 lines#60, use=cons25l1-m,
1754 #### 386BSD and BSD/OS Consoles
1757 # This was the original 386BSD console entry (I think).
1758 # Some places it's named oldpc3|oldibmpc3.
1759 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1760 origpc3|origibmpc3|IBM PC 386BSD Console,
1761 OTbs, am, bw, eo, xon,
1763 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1764 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1765 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1766 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1767 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1768 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1769 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1771 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1772 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1775 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1776 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1777 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1778 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1780 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1781 # Note, the emulator supports many of the additional console features
1782 # listed in the iBCS2 (e.g. character-set selection) though not all
1783 # are described here. This entry really ought to be upgraded.
1784 # Also note, the console will also work with fewer lines after doing
1785 # "stty rows NN", e.g. to use 24 lines.
1786 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1787 # Bug: The <op> capability resets attributes.
1788 bsdos-pc|IBM PC BSD/OS Console,
1789 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1790 use=bsdos-pc-nobold,
1792 bsdos-pc-nobold|BSD/OS PC console w/o bold,
1793 use=klone+color, use=bsdos-pc-m,
1795 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
1796 OTbs, am, eo, km, xon,
1797 cols#80, it#8, lines#25,
1798 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1799 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1800 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1801 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1802 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1803 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1804 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1805 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1808 # Old names for BSD/OS PC console used in releases before 4.1.
1809 pc3|BSD/OS on the PC Console,
1810 use=bsdos-pc-nobold,
1811 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1814 # BSD/OS on the SPARC
1815 bsdos-sparc|Sun SPARC BSD/OS Console,
1818 # BSD/OS on the PowerPC
1819 bsdos-ppc|PowerPC BSD/OS Console,
1823 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1825 # Actually (TD pointed this out at the time the acsc string was added):
1826 # vt52 shouldn't define full acsc since most of the cells don't match.
1827 # see vt100 manual page A-31. This is the list that does match:
1836 # The line-drawing happens to work in several terminal emulators, but should
1837 # not be used as a guide to the capabilities of the vt52. Note in particular
1838 # that vt52 does not support line-drawing characters (the scan-X values refer
1839 # to a crude plotting feature) -TD
1842 cols#80, it#8, lines#24,
1843 acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
1844 cub1=\ED, cud1=\EB, cuf1=\EC,
1845 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1846 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1847 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1849 #### DEC VT100 and compatibles
1851 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1852 # and micro consoles can be found in the `obsolete' section. More details on
1853 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1854 # found near the end of this file.
1856 # Except where noted, these entries are DEC's official terminfos.
1857 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1858 # Engineering for more information. Updated terminfos and termcaps
1859 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1861 # In October 1995 DEC sold its terminals business, including the VT and Dorio
1862 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1863 # its name to Boundless Technologies; see http://www.boundless.com.
1866 # NOTE: Any VT100 emulation, whether in hardware or software, almost
1867 # certainly includes what DEC called the `Level 1 editing extension' codes;
1868 # only the very oldest VT100s lacked these and there probably aren't any of
1869 # those left alive. To capture these, use one of the VT102 entries.
1871 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1872 # since the cursor is left in a different position while in the
1873 # weird state (concept at beginning of next line, vt100 at end
1874 # of this line) so all versions of vi before 3.7 don't handle
1875 # <xenl> right on vt100. The correct way to handle <xenl> is when
1876 # you output the char in column 80, immediately output CR LF
1877 # and then assume you are in column 1 of the next line. If <xenl>
1878 # is on, am should be on too.
1880 # I assume you have smooth scroll off or are at a slow enough baud
1881 # rate that it doesn't matter (1200? or less). Also this assumes
1882 # that you set auto-nl to "on", if you set it off use vt100-nam
1885 # The padding requirements listed here are guesses. It is strongly
1886 # recommended that xon/xoff be enabled, as this is assumed here.
1888 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1889 # tab settings are in non-volatile memory and don't need to be
1890 # reset upon login. Also setting the number of columns glitches
1891 # the screen annoyingly. You can type "reset" to get them set.
1893 # The VT100 series terminals have cursor ("arrows") keys which can operate
1894 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1895 # is the reset state, and is assumed to be the normal state. Application
1896 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1897 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1898 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1899 # was provided primarily as an aid to the porting of VT52 applications. It is
1900 # assumed that the cursor keys are normally in Cursor Mode, and expected that
1901 # applications such as vi will always transmit the <smkx> string. Therefore,
1902 # the definitions for the cursor keys are made to match what the terminal
1903 # transmits after the <smkx> string is transmitted. If the <smkx> string
1904 # is a null string or is not defined, then cursor keys are assumed to be in
1905 # "Cursor Mode", and the cursor keys definitions should match that assumption,
1906 # else the application may fail. It is also expected that applications will
1907 # always transmit the <rmkx> string to the terminal before they exit.
1909 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1910 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1911 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1912 # Application Mode. Numeric Mode is the reset state, and is assumed to be
1913 # the normal state. Application Mode is the "set" state. In Numeric Mode,
1914 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1915 # Enter key transmits the same as the Return key (Note: the Return key
1916 # can be configured to send either LF (\015) or CR LF). In Application Mode,
1917 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1918 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1919 # is normally in Numeric Mode. If an application requires that the keypad be
1920 # in Application Mode then it is expected that the user, or the application,
1921 # will set the TERM environment variable to point to a terminfo entry which has
1922 # defined the <smkx> string to include the codes that switch the keypad into
1923 # Application Mode, and the terminfo entry will also define function key
1924 # fields to match the Application Mode control codes. If the <smkx> string
1925 # is a null string or is not defined, then the keypad is assumed to be in
1926 # Numeric Mode. If the <smkx> string switches the keypad into Application
1927 # Mode, it is expected that the <rmkx> string will contain the control codes
1928 # necessary to reset the keypad to "Normal" mode, and it is also expected that
1929 # applications which transmit the <smkx> string will also always transmit the
1930 # <rmkx> string to the terminal before they exit.
1932 # Here's a diagram of the VT100 keypad keys with their bindings.
1933 # The top line is the name of the key (some DEC keyboards have the keys
1934 # labelled somewhat differently, like GOLD instead of PF1, but this is
1935 # the most "official" name). The second line is the escape sequence it
1936 # generates in Application Keypad mode (where "$" means the ESC
1937 # character). The third line contains two items, first the mapping of
1938 # the key in terminfo, and then in termcap.
1939 # _______________________________________
1940 # | PF1 | PF2 | PF3 | PF4 |
1941 # | $OP | $OQ | $OR | $OS |
1942 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1944 # | $Ow | $Ox | $Oy | $Om |
1945 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
1947 # | $Ot | $Ou | $Ov | $Ol |
1948 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
1950 # | $Oq | $Or | $Os | enter |
1951 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
1954 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
1956 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
1957 # terminfo guidelines. That is a compromise used to assign the remaining
1958 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
1960 vt100+keypad|dec vt100 numeric keypad no fkeys,
1961 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
1962 vt100+pfkeys|dec vt100 numeric keypad,
1963 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1965 vt100+fnkeys|dec vt100 numeric keypad,
1966 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
1967 kf9=\EOw, use=vt100+pfkeys,
1969 # A better adaptation to modern keyboards such as the PC's, which have a dozen
1970 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
1971 # use the 5-key arrangement to model the arrow keys as suggested in the
1972 # terminfo guidelines:
1973 # _______________________________________
1974 # | PF1 | PF2 | PF3 | PF4 |
1975 # | $OP | $OQ | $OR | $OS |
1976 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1978 # | $Ow | $Ox | $Oy | $Om |
1979 # |_ka1__K1_|_________|_ka3__K3_|_________|
1981 # | $Ot | $Ou | $Ov | $Ol |
1982 # |_________|_kb2__K2_|_________|_________|
1984 # | $Oq | $Or | $Os | enter |
1985 # |_kc1__K4_|_________|_kc3__K5_| $OM |
1988 # |___________________|_________|_kent_@8_|
1990 vt220+keypad|dec vt220 numeric keypad,
1991 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
1992 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
1995 vt100+enq|ncurses extension for vt100-style ENQ,
1996 u8=\E[?1;2c, use=ansi+enq,
1997 vt102+enq|ncurses extension for vt102-style ENQ,
1998 u8=\E[?6c, use=ansi+enq,
2000 # And here, for those of you with orphaned VT100s lacking documentation, is
2001 # a description of the soft switches invoked when you do `Set Up'.
2003 # Scroll 0-Jump Shifted 3 0-#
2004 # | 1-Smooth | 1-British pound sign
2005 # | Autorepeat 0-Off | Wrap Around 0-Off
2007 # | | Screen 0-Dark Bkg | | New Line 0-Off
2008 # | | | 1-Light Bkg | | | 1-On
2009 # | | | Cursor 0-Underline | | | Interlace 0-Off
2010 # | | | | 1-Block | | | | 1-On
2012 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2014 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2015 # | | | 1-On | | | 1-50 Hz
2016 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2017 # | | 1-ANSI | | 1-8 Bits
2018 # | Keyclick 0-Off | Parity 0-Off
2020 # Margin Bell 0-Off Parity Sense 0-Odd
2023 # The following SET-UP modes are assumed for normal operation:
2024 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2025 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2026 # Other SET-UP modes may be set for operator convenience or communication
2027 # requirements; I recommend
2028 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2029 # Unless you have a graphics add-on such as Digital Engineering's VT640
2030 # (and even then, whenever it can be arranged!) you should set
2033 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2034 vt100|vt100-am|dec vt100 (w/advanced video),
2035 OTbs, am, mc5i, msgr, xenl, xon,
2036 cols#80, it#8, lines#24, vt#3,
2037 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2038 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2039 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2040 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2041 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2042 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2043 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2044 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2045 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2046 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2047 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2048 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2049 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2050 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2051 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2052 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2054 vt100nam|vt100-nam|vt100 no automargins,
2055 am@, xenl@, use=vt100-am,
2056 vt100-vb|dec vt100 (w/advanced video) & no beep,
2057 bel@, flash=\E[?5h\E[?5l, use=vt100,
2059 # Ordinary vt100 in 132 column ("wide") mode.
2060 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2062 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2063 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2064 cols#132, lines#14, vt@,
2065 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2067 # vt100 with no advanced video.
2068 vt100-nav|vt100 without advanced video option,
2070 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2072 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2073 cols#132, lines#14, use=vt100-nav,
2075 # vt100 with one of the 24 lines used as a status line.
2076 # We put the status line on the top.
2077 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2080 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2081 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2082 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2083 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2085 # Status line at bottom.
2086 # Clearing the screen will clobber status line.
2087 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2090 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2091 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2093 # Most of the `vt100' emulators out there actually emulate a vt102
2094 # This entry (or vt102-nsgr) is probably the right thing to use for
2097 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2099 vt102-w|dec vt102 in wide mode,
2101 rs3=\E[?3h, use=vt102,
2103 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2104 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2105 # string in the canonical vt100 entry above leaves the screen littered
2106 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2107 # after highlight turnoffs. This entry should fix that, and even leave
2108 # ACS support working, at the cost of making multiple-highlight changes
2109 # slightly more expensive.
2110 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2111 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2112 sgr@, sgr0=\E[m, use=vt102,
2114 # VT125 Graphics CRT. Clear screen also erases graphics
2115 # Some vt125's came configured with vt102 support.
2116 vt125|vt125 graphics terminal,
2118 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2120 # This isn't a DEC entry, it came from University of Wisconsin.
2121 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2124 cols#80, it#8, lines#24, vt#3,
2125 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2126 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2127 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2128 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2129 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2130 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2131 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2132 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2133 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2135 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2136 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2137 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2139 # vt132 - like vt100 but slower and has ins/del line and such.
2140 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2141 # manual and from the ANSI standard, this describes the actual
2142 # terminal. I've never actually used a vt132 myself, so this
2147 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2148 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2150 # This vt220 description maps F5--F9 to the second block of function keys
2151 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2152 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2153 # PF1--PF4 are used as F1--F4.
2155 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2156 OTbs, OTpt, am, mir, xenl, xon,
2157 cols#80, lines#24, vt#3,
2159 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2160 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2161 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2162 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2163 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2164 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2165 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2166 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2167 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2168 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2169 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2170 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2171 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2172 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2173 rmso=\E[27m, rmul=\E[24m,
2174 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2175 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2176 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2177 smso=\E[7m, smul=\E[4m,
2179 # A much better description of the VT200/220; used to be vt220-8
2180 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2181 # designation to accommodate bug in pcvt -TD
2182 vt220|vt200|dec vt220,
2183 OTbs, am, mc5i, mir, msgr, xenl, xon,
2184 cols#80, it#8, lines#24, vt#3,
2185 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2186 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2187 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2188 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2189 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2190 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2191 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2192 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2193 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2194 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2195 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2196 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2197 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2198 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2199 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2200 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2201 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2202 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2203 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2204 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2205 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2206 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2207 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2208 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2209 vt220-w|vt200-w|DEC vt220 in wide mode,
2211 rs3=\E[?3h, use=vt220,
2212 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2213 OTbs, am, mc5i, mir, msgr, xenl, xon,
2214 cols#80, it#8, lines#24, vt#3,
2215 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2216 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2217 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2218 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2219 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2220 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2221 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2222 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2223 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2224 il=\233%p1%dL, il1=\233L, ind=\ED,
2225 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2226 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2227 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2228 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2229 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2230 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2231 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2232 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2233 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2234 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2235 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2236 rs1=\233?3l, sc=\E7,
2237 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2238 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2239 smso=\2337m, smul=\2334m, tbc=\2333g,
2242 # This vt220 description regards F6--F10 as the second block of function keys
2243 # at the top of the keyboard. This mapping follows the description given
2244 # in the VT220 Programmer Reference Manual and agrees with the labeling
2245 # on some terminals that emulate the vt220. There is no support for an F5.
2246 # See vt220 for an alternate mapping.
2248 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2249 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2250 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2251 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2252 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2254 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2256 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2258 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2259 # (not an official DEC entry!)
2260 # The problem with real vt220 terminals is they don't send escapes when in
2261 # in vt220 mode. This can be gotten around two ways. 1> don't send
2262 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2263 # features of vt100 advanced video which it then has.
2265 # This entry takes the view of putting a vt220 into vt100 mode so
2266 # you can use the escape key in emacs and everything else which needs it.
2268 # You probably don't want to use this on a VMS machine since VMS will think
2269 # it has a vt220 and will get fouled up coming out of emacs
2271 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2272 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2273 vt200-js|vt220-js|dec vt200 series with jump scroll,
2276 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2277 cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2278 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2280 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2281 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2282 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2283 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2284 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2285 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2286 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2288 # This was DEC's vt320. Use the purpose-built one below instead
2289 #vt320|DEC VT320 in vt100 emulation mode,
2292 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2294 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2296 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2298 # These entries are not DEC's official ones, they were purpose-built for the
2299 # VT320. Here are the designer's notes:
2300 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2301 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2302 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2303 # Things that use <knxt> usually use tab anyways... and things that don't use
2304 # tab usually use <knxt> instead...
2305 # kprv is same as tab - Backtab is useless...
2306 # I left out <sgr> because of its RIDICULOUS complexity,
2307 # and the resulting fact that it causes the termcap translation of the entry
2308 # to SMASH the 1k-barrier...
2309 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2310 # (vt320: uncommented <fsl> --esr)
2311 vt320|vt300|dec vt320 7 bit terminal,
2312 am, eslok, hs, mir, msgr, xenl,
2313 cols#80, lines#24, wsl#80,
2314 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2315 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2316 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2317 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2318 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2319 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2320 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2321 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2322 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2324 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2325 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2326 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2327 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2328 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2329 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2330 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2331 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2332 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2333 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2334 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2336 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2338 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2339 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2340 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2341 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2342 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2344 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2345 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2347 # We have to init 132-col mode, not 80-col mode.
2348 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2350 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2351 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2353 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2355 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2356 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2359 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2360 # which are pretty much a superset of the VT320. They have the
2361 # host writable status line, yet another different DRCS matrix size,
2362 # and such, but they add the DEC Technical character set, Multiple text
2363 # pages, selectable length pages, and the like. The difference between
2364 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2365 # monitor, the former has 4 planes and a color monitor. These terminals
2366 # support VT131 and ANSI block mode, but as with much of these things,
2367 # termcap/terminfo doesn't deal with these features.
2369 # Note that this entry is are set up in what was the standard way for GNU
2370 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2371 # keys were switched into application mode at the same time the numeric pad
2372 # is switched into application mode. This changes the definitions of the
2373 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2374 # your termcap or terminfo entry,
2376 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2377 # (vt340: string capability "sb=\E[M" corrected to "sr";
2378 # also, added <rmam>/<smam> based on the init string -- esr)
2379 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2380 am, eslok, hs, mir, msgr, xenl, xon,
2381 cols#80, it#8, lines#24, vt#3,
2382 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2383 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2384 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2385 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2386 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2387 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2388 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2389 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2390 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2392 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2393 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2394 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2395 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2396 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2397 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2398 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2399 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2400 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2401 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2402 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2403 tsl=\E[2$~\E[1$}\E[1;%dH,
2405 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2406 # (originally written with vt420 as its primary name, and usable for it).
2408 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2409 # text pages and long text pages with selectable length of the vt340, along
2410 # with left and right margins, rectangular area text copy, fill, and erase
2411 # operations, selected region character attribute change operations,
2412 # page memory and rectangle checksums, insert/delete column, reception
2413 # macros, and other features too numerous to remember right now. TERMCAP
2414 # can only take advantage of a few of these added features.
2416 # Note that this entry is are set up in what was the standard way for GNU
2417 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2418 # keys were switched into application mode at the same time the numeric pad
2419 # is switched into application mode. This changes the definitions of the
2420 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2421 # your termcap entry,
2423 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2424 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2425 # also, added <rmam>/<smam> based on the init string -- esr)
2426 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2427 am, eslok, hs, mir, msgr, xenl, xon,
2428 cols#80, it#8, lines#24, vt#3,
2429 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2430 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2431 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2432 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2433 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2434 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2435 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2436 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2437 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2438 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2439 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2440 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2441 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2442 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2443 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2444 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2445 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2446 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2447 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2448 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2449 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2450 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2451 tsl=\E[2$~\E[1$}\E[1;%dH,
2453 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2454 # a missing <sc> -- esr)
2457 cols#80, lines#24, vt#3,
2458 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2459 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2460 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2461 cub1=^H, cud1=\E[B, cuf1=\E[C,
2462 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2463 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2464 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2465 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2466 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2467 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2468 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2469 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2470 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2471 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2472 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2473 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2474 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2475 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2476 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2477 smkx=\E=, smso=\E[7m, smul=\E[4m,
2479 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2480 # takes two parameters, the key and the string. Translating the key is
2481 # straightforward (keys 1-5 are not defined on real terminals, though some
2482 # emulators define these):
2484 # if (key < 16) then value = key;
2485 # else if (key < 21) then value = key + 1;
2486 # else if (key < 25) then value = key + 2;
2487 # else if (key < 27) then value = key + 3;
2488 # else if (key < 30) then value = key + 4;
2489 # else value = key + 5;
2491 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2492 # There's no provision in terminfo for emitting a string in this format, so the
2493 # application has to know it.
2495 vt420pc|DEC VT420 w/PC keyboard,
2496 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2497 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2498 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2499 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2500 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2501 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2502 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2503 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2504 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2505 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2506 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2507 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2508 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2509 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2510 pctrm=USR_TERM\:vt420pcdos\:,
2511 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2514 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2516 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2518 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2519 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2521 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2522 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2523 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2524 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2525 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2526 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2527 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2532 vt510pc|DEC VT510 w/PC keyboard,
2534 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2539 # The VT520 is a monochrome text terminal capable of managing up to
2540 # four independent sessions in the terminal. It has multiple ANSI
2541 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2542 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2543 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2545 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2546 # [Alt]/[Print Screen] depending upon which keyboard and which
2547 # terminal mode is being used. If Set-Up has been disabled or
2548 # assigned to an unknown key, Set-Up may be entered by pressing
2549 # [F3] as the first key after power up, regardless of keyboard type.
2550 # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2553 cols#80, lines#24, vt#3,
2554 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2555 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2556 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2557 cub1=^H, cud1=\E[B, cuf1=\E[C,
2558 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2559 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2560 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2561 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2562 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2563 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2564 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2565 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2567 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2568 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2569 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2570 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2571 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2572 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2573 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2574 smso=\E[7m, smul=\E[4m,
2576 # (vt525: I added <rmam>/<smam> based on the init string;
2577 # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2580 cols#80, lines#24, vt#3,
2581 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2582 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2583 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2584 cub1=^H, cud1=\E[B, cuf1=\E[C,
2585 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2586 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2587 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2588 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2589 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2590 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2591 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2592 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2594 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2595 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2596 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2597 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2598 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2599 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2600 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2601 smso=\E[7m, smul=\E[4m,
2603 #### VT100 emulations
2606 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2607 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2608 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2609 # that this works best with a stock vt100 entry.
2610 dec-vt100|EWAN telnet's vt100 emulation,
2613 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2614 dec-vt220|DOS tnvt200 terminal emulator,
2617 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2618 # anyone who needs PC VT340 emulation. (or anything below that level, for
2619 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2620 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2621 # I can send the address if requested.
2622 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2623 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2624 z340|zstem vt340 terminal emulator 132col 42line,
2626 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2627 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2629 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2631 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2632 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2635 # CRT is shareware. It implements some xterm features, including mouse.
2636 crt|crt-vt220|CRT 2.3 emulating VT220,
2639 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2641 # PuTTY 0.55 (released 3 August 2004)
2642 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2644 # Comparing with 0.51, vttest is much better (only a few problems with the
2645 # cursor position reports and wrapping).
2647 # PuTTY 0.51 (released 14 December 2000)
2649 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2650 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2651 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2652 # to xterm, which is incorrect, since several features are misimplemented:
2654 # Alt+key always sends ESC+key, so 'km' capability is removed.
2656 # Control responses, wrapping and tabs are buggy, failing a couple of
2657 # screens in vttest.
2659 # xterm mouse support is not implemented (unrelease version may).
2661 # Several features such as backspace/delete are optional; this entry documents
2662 # the default behavior -TD
2664 putty|PuTTY terminal emulator,
2665 am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
2666 colors#8, it#8, ncv#22, pairs#64,
2667 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2668 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2669 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2670 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2671 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2672 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2673 dch=\E[%p1%dP, dch1=\E[P,
2674 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2675 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2676 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2677 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2678 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2680 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2681 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2682 kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
2683 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
2684 kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2685 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2686 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2687 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2688 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2689 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2690 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2691 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2692 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2693 rmso=\E[27m, rmul=\E[24m,
2694 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2695 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2696 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2697 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2698 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2699 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2700 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2701 vt100-putty|Reset PuTTY to pure vt100,
2702 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2704 # palette is hardcoded...
2705 putty-256color|PuTTY 0.58 with xterm 256-colors,
2706 initc@, use=xterm+256color, use=putty,
2708 # One of the keyboard selections is "VT100+".
2709 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2710 putty-vt100|VT100+ keyboard layout,
2711 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2712 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2713 kf9=\EOX, use=putty,
2715 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2716 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2717 # (communication program) which supports:
2719 # - Serial port connections.
2720 # - TCP/IP (telnet) connections.
2721 # - VT100 emulation, and selected VT200/300 emulation.
2722 # - TEK4010 emulation.
2723 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2725 # - Scripts using the "Tera Term Language".
2726 # - Japanese and Russian character sets.
2728 # The program does not come with terminfo or termcap entries. However, the
2729 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2730 # vt52 or doublesize character support; blinking is done with color). Besides
2731 # the HPA, VPA extensions it also implements CPL and CNL.
2733 # All of the function keys can be remapped. This description shows the default
2734 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2735 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2736 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2744 # ANSI colors are implemented, but cannot be combined with video attributes
2745 # except for reverse.
2747 # No fonts are supplied with the program, so the acsc string is chosen to
2748 # correspond with the default Microsoft terminal font.
2750 # Tera Term recognizes some xterm sequences, including those for setting and
2751 # retrieving the window title, and for setting the window size (i.e., using
2752 # "resize -s"), though it does not pass SIGWINCH to the application if the
2753 # user resizes the window with the mouse.
2754 teraterm|Tera Term Pro,
2757 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2758 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2759 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2760 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2761 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2762 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2763 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2764 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2765 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2766 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2767 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2768 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2769 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2770 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
2771 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
2772 use=klone+color, use=vt100,
2774 # Tested with WinNT 4.0, the telnet application assumes the screensize is
2775 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2778 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
2779 # for casual (occasional) use. Also fails several of the vttest screens,
2780 # but that is not unusual for vt100 "emulators".
2781 # b) Does not implement vt100 keypad
2782 # c) Recognizes a subset of vt52 controls.
2783 ms-vt100|MS telnet imitating dec vt100,
2785 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2786 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
2787 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
2789 # Tested with Windows 2000, the telnet application runs in a console window,
2790 # also using 'Terminal' font.
2793 # a) This version has no function keys or numeric keypad. Unlike the older
2794 # version, the numeric keypad is entirely ignored.
2795 # b) The program sets $TERM to "ansi", which of course is inaccurate.
2796 ms-vt100-color|vtnt|windows 2000 ansi (sic),
2798 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
2801 # Based on comments from Federico Bianchi:
2803 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
2804 # scheme for PF keys.
2806 # and PuTTY wishlist:
2808 # The modifiers are represented as the codes listed above, prefixed to
2809 # the normal sequences. If the modifier is pressed alone, its sequence
2810 # is transmitted twice in succession. If multiple modifiers apply,
2811 # they're transmitted in the order shift, control, alt.
2816 ms-vt100+|vt100+|windows XP vt100+ (sic),
2817 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
2818 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
2819 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
2820 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
2821 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
2822 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
2823 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
2824 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
2825 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
2826 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
2827 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
2828 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
2829 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
2830 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
2831 knp=\E/, kpp=\E?, use=ms-vt100-color,
2833 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
2836 # a minimal subset of a vt100 (compare with "news-unk).
2837 tt|tkterm|Don Libes' tk text widget terminal emulator,
2838 clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
2839 cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2840 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
2843 #### X terminal emulators
2845 # You can add the following line to your .Xdefaults to change the terminal type
2846 # set by the xterms you start up to my-xterm:
2848 # *termName: my-xterm
2850 # System administrators can change the default entry for xterm instances
2851 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2852 # case, xterm will detect and reject an invalid terminal type, falling back
2853 # to the default of xterm.
2856 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2857 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2858 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2859 # as these seem not to work -- esr)
2860 x10term|vs100-x10|xterm terminal emulator (X10 window system),
2861 OTbs, am, km, mir, msgr, xenl, xon,
2862 cols#80, it#8, lines#65,
2863 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2864 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2865 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2866 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2867 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2868 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2869 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2870 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2871 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2872 smso=\E[7m, smul=\E[4m,
2873 # Compatible with the R5 xterm
2874 # (from the XFree86 3.2 distribution, <blink=@> removed)
2875 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2876 # corrected typos in rs2 string - TD
2878 xterm-r5|xterm R5 version,
2879 OTbs, am, km, msgr, xenl,
2880 cols#80, it#8, lines#24,
2881 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2882 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2883 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2884 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2885 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2886 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2887 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2888 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2889 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2890 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2891 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2892 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2893 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2894 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2896 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2898 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
2899 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2900 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
2901 # Compatible with the R6 xterm
2902 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
2903 # added khome/kend, hts based on the R6 xterm code - TD
2904 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
2905 # for compatibility with other emulators).
2906 xterm-r6|xterm-old|xterm X11R6 version,
2907 OTbs, am, km, mir, msgr, xenl,
2908 cols#80, it#8, lines#24,
2909 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2910 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2912 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2914 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2915 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
2917 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
2918 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2919 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2920 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2921 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2922 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2923 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2924 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2925 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
2926 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2927 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2928 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
2929 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
2930 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2932 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
2933 # The name has been changed and some aliases have been removed.
2934 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
2935 OTbs, am, bce, km, mir, msgr, xenl,
2936 cols#80, it#8, lines#24, ncv@,
2937 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2938 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2939 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2940 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2941 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2943 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2944 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2945 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
2946 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
2948 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
2949 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
2950 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
2951 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2952 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2953 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2954 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2955 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
2956 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
2957 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
2958 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
2959 rmso=\E[27m, rmul=\E[24m, rs1=^O,
2960 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
2961 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2962 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2963 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2964 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
2965 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
2966 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
2967 use=ecma+color, use=vt220+keypad,
2969 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
2970 # codes for F1-F4 except while in VT220 mode.
2971 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
2972 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
2974 # This version was released in XFree86 3.3.3 (November 1998).
2975 # Besides providing printer support, it exploits a new feature that allows
2976 # xterm to use terminfo-based descriptions with the titeInhibit resource.
2977 # -- the distribution contained incorrect khome/kend values -TD
2978 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
2980 blink=\E[5m, ich1@, invis=\E[8m,
2981 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
2982 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
2983 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
2984 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2985 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
2987 # This version was released in XFree86 4.0.
2988 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
2990 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
2991 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
2992 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
2993 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
2994 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
2995 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
2996 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
2997 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
2998 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
2999 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3000 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3001 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3002 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3003 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3004 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3005 smcup=\E[?1049h, use=xterm-xf86-v333,
3007 # This version was released in XFree86 4.3.
3008 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3009 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3010 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3012 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3015 # This version was released in XFree86 4.4.
3016 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3017 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3018 rin=\E[%p1%dT, use=xterm-xf86-v43,
3020 xterm-xfree86|xterm terminal emulator (XFree86),
3023 # This version reflects the current xterm features.
3024 xterm-new|modern xterm terminal emulator,
3026 indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
3027 kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
3028 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3029 kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
3030 knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
3033 # This fragment describes as much of XFree86 xterm's "pc-style" function
3034 # keys as will fit into terminfo's 60 function keys.
3037 # ---------------------------------
3044 # 8 Shift + Alt + Control
3045 # ---------------------------------
3046 # The meta key may also be used as a modifier in this scheme, adding another
3047 # bit to the parameter.
3048 xterm+pcfkeys|fragment for PC-style fkeys,
3049 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3052 xterm+noapp|fragment with cursor keys in normal mode,
3053 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3056 xterm+app|fragment with cursor keys in application mode,
3057 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3060 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3061 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3062 # the earlier scheme, as noted in the "use=" clauses in this file.
3064 # The original assignments from patch #94 for cursor-keys had some technical
3067 # A parameter for a function-key to represent a modifier is just more
3068 # bits. But for a cursor-key it may change the behavior of the
3069 # application. For instance, emacs decodes the first parameter of a
3070 # cursor-key as a repeat count.
3072 # A parameterized string should (really) not begin with SS3 (\EO).
3073 # Rather, CSI (\E[) should be used.
3075 # For these reasons, the original assignments were deprecated. For
3076 # compatibility reasons, they are still available as a setting of xterm's
3077 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3078 # that might apply to xterm+pcfkeys with different values of that resource.
3079 xterm+pcc3|fragment with modifyCursorKeys:3,
3080 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3081 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3082 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3083 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3084 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3085 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3086 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3087 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3090 xterm+pcc2|fragment with modifyCursorKeys:2,
3091 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3092 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3093 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3094 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3095 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3096 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3097 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3099 xterm+pcc1|fragment with modifyCursorKeys:1,
3100 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3101 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3102 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3103 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3104 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3105 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3107 xterm+pcc0|fragment with modifyCursorKeys:0,
3108 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3109 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3110 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3111 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3112 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3113 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3116 # Here are corresponding fragments from xterm patch #216:
3118 xterm+pcf0|fragment with modifyFunctionKeys:0,
3119 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3120 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3121 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3122 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3123 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3124 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3125 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3126 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3127 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3128 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3129 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3130 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3131 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3132 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3133 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3134 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3135 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3137 xterm+pcf2|fragment with modifyFunctionKeys:2,
3138 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3139 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3140 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3141 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3142 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3143 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3144 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3145 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3146 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3147 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3148 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3149 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3150 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3151 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3152 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3153 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3154 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3155 kf8=\E[19~, kf9=\E[20~,
3157 # Chunks from xterm #230:
3158 xterm+pce2|fragment with modifyCursorKeys:2,
3159 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3160 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3161 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3162 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3163 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3164 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3165 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3166 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3167 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3168 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3169 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3172 xterm+edit|fragment for 6-key editing-keypad,
3173 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3176 xterm+pc+edit|fragment for pc-style editing keypad,
3177 kend=\E[4~, khome=\E[1~,
3179 xterm+vt+edit|fragment for vt220-style editing keypad,
3180 kfnd=\E[1~, kslt=\E[4~,
3183 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3184 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3185 # is shown here (because that is used in mrxvt and mlterm):
3186 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3187 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3188 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3189 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3190 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3191 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3192 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3193 kf63=\E[13;4~, use=xterm+pcf2,
3195 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3196 xterm-basic|modern xterm terminal emulator - common,
3197 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3198 colors#8, cols#80, it#8, lines#24, pairs#64,
3199 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3200 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3201 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3202 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3203 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3204 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3205 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3206 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3207 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3208 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3209 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
3210 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3211 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3212 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3213 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3214 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3215 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3216 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3217 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3218 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3219 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3220 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3221 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3223 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3224 # In retrospect, something like xterm-r6 was intended here -TD
3225 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3226 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3228 # This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3229 xterm-16color|xterm with 16 colors like aixterm,
3230 use=ibm+16color, use=xterm-new,
3232 # This is a compile-time feature of XFree86 xterm beginning with
3233 # patch #111 (1999/7/10) -TD
3234 xterm+256color|xterm 256-color feature,
3236 colors#256, pairs#32767,
3237 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3238 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3239 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3242 # This is a compile-time feature of XFree86 xterm beginning with
3243 # patch #115 (1999/9/18) -TD
3245 # Note that the escape sequences used are the same as for 256-colors - xterm
3246 # has a different table of default color resource values. If built for
3247 # 256-colors, it can still handle an 88-color palette by using the initc
3250 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3251 # which support the xterm+256color feature support the associated initc
3252 # capability. So it is cancelled in the entries which use this and/or the
3253 # xterm+256color block.
3254 xterm+88color|xterm 88-color feature,
3255 colors#88, pairs#7744, use=xterm+256color,
3257 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3258 xterm-256color|xterm with 256 colors,
3259 use=xterm+256color, use=xterm-new,
3260 xterm-88color|xterm with 88 colors,
3261 use=xterm+88color, use=xterm-256color,
3263 # These two are used to demonstrate the any-event mouse support, i.e., by
3264 # using an extended name "XM" which tells ncurses to put the terminal into
3265 # a special mode when initializing the xterm mouse.
3266 xterm-1002|testing xterm-mouse,
3267 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3268 xterm-1003|testing xterm-mouse,
3269 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3271 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3272 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3273 # To use it, your decTerminalID resource must be set to 200 or above.
3280 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3281 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3282 colors#8, cols#80, it#8, lines#24, pairs#64,
3283 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3284 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3285 civis=\233?25l, clear=\233H\2332J,
3286 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3287 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3288 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3289 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3290 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3291 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3292 flash=\233?5h$<100/>\233?5l, home=\233H,
3293 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3294 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3295 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3296 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
3297 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3298 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3299 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3300 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3301 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3302 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3303 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3304 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3305 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3306 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3307 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3308 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3310 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3311 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3312 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3313 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3314 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3315 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3316 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3317 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3318 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3320 xterm-hp|xterm with hpterm function keys,
3321 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3322 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3323 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3324 knp=\ES, kpp=\ET, use=xterm-basic,
3326 xterm-sco|xterm with SCO function keys,
3327 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3328 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3329 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3330 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3331 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3332 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3333 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3334 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3335 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3336 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3337 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3338 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3341 # The xterm-new description has all of the features, but is not completely
3342 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3343 # sunKeyboard resource to true:
3344 # + maps the editing keypad
3345 # + interprets control-function-key as a second array of keys, so a
3346 # 12-fkey keyboard can support vt220's 20-fkeys.
3347 # + maps numeric keypad "+" to ",".
3348 # + uses DEC-style control sequences for the application keypad.
3350 xterm-vt220|xterm emulating vt220,
3351 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3352 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3353 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3354 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3355 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3356 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3357 use=xterm+app, use=xterm+edit, use=xterm-basic,
3360 xterm-vt52|xterm emulating dec vt52,
3361 cols#80, it#8, lines#24,
3362 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3363 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3364 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3365 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
3366 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3368 xterm-noapp|xterm with cursor keys in normal mode,
3369 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3372 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3373 lines#24, use=xterm-old,
3375 # This is xterm for ncurses.
3376 xterm|xterm terminal emulator (X Window System),
3379 # These entries allow access to the X titlebar and icon name as a status line.
3380 # Note that twm (and possibly window managers descended from it such as tvtwm,
3381 # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3383 xterm+sl|access X title line and icon name,
3386 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3387 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3390 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3393 # The following xterm variants don't depend on your base version
3395 # xterm with bold instead of underline
3396 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3397 smso=\E[7m, smul=\E[1m, use=xterm-old,
3398 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3399 # (kterm should not invoke DEC Graphics as the alternate character set
3400 # -- Kenji Rikitake)
3401 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3402 # -- MATSUMOTO Shoji)
3403 # kterm implements acsc via built-in table of X Drawable's
3404 kterm|kterm kanji terminal emulator (X window system),
3407 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3408 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3409 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3410 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3411 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3412 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3413 kterm-color|kterm-co|kterm with ANSI colors,
3414 ncv@, use=kterm, use=ecma+color,
3415 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3416 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3417 ich@, ich1@, use=xterm,
3418 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3419 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3420 rmcup@, smcup@, use=xterm,
3422 # This describes the capabilities of color_xterm, an xterm variant from
3423 # before ECMA-64 color support was folded into the main-line xterm release.
3424 # This entry is straight from color_xterm's maintainer.
3425 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3426 # The README's with the distribution also say that it supports SGR 21, 24, 25
3427 # and 27, but they are not present in the terminfo or termcap.
3428 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3429 OTbs, am, km, mir, msgr, xenl,
3430 cols#80, it#8, lines#65, ncv@,
3431 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3432 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3433 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3434 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3435 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3436 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3437 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3438 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3439 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3440 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3441 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3442 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3443 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3444 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3445 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3446 rmso=\E[27m, rmul=\E[24m,
3447 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3449 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3450 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3451 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3452 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3454 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3455 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3456 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3457 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3458 # that each of those implements the home, end, delete keys differently.
3460 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3461 # colors; note that this is not compatible with the 5.2 version.
3462 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3463 # match XFree86's xterm.terminfo usage and prevent circular links
3464 xterm-color|nxterm|generic color xterm,
3466 op=\E[m, use=xterm-r6, use=klone+color,
3468 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3469 gnome-rh62|Gnome terminal,
3471 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3474 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3476 # This implements a subset of vt102 with a random selection of features from
3477 # other terminals such as color and function-keys.
3479 # shift-f1 to shift-f10 are f11 to f20
3481 # NumLock changes the application keypad to approximate vt100 keypad, except
3482 # that there is no escape sequence matching comma (,).
3484 # Other defects observed:
3485 # vt100 LNM mode is not implemented.
3486 # vt100 80/132 column mode is not implemented.
3487 # vt100 DECALN is not implemented.
3488 # vt100 DECSCNM mode is not implemented, so flash does not work.
3489 # vt100 TBC (tab reset) is not implemented.
3490 # xterm alternate screen controls do not restore cursor position properly
3491 # it hangs in tack after running function-keys test.
3492 gnome-rh72|GNOME Terminal,
3494 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3495 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3496 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3497 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3499 # GNOME Terminal 2.0.1 (Redhat 8.0)
3501 # Documentation now claims it implements vt220 (which is demonstrably false).
3502 # However, it does implement ECH, which is a vt220 feature. And there are
3503 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3504 # more of its bugs using vttest.
3506 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3507 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3509 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3510 # operations. Shift-tab generates a distinct sequence so it can be argued
3511 # that it implements kcbt.
3512 gnome-rh80|GNOME Terminal,
3514 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3515 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3517 # GNOME Terminal 2.2.1 (Redhat 9.0)
3519 # bce and msgr are repaired.
3520 gnome-rh90|GNOME Terminal,
3522 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3523 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3524 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3527 # GNOME Terminal 2.14.2 (Fedora Core 5)
3528 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3529 gnome-fc5|GNOME Terminal,
3531 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3532 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3534 # GNOME Terminal 2.18.1 (2007 snapshot)
3536 # For any "recent" version of gnome-terminal, it is futile to attempt to
3537 # support modifiers on cursor- and keypad keys because the program usually
3538 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3539 # of the keys (which more/less correspond to the termcap values), and will
3540 # interpret those according to the $TERM value, but others not in the
3541 # terminfo according to some constantly changing set of hacker guidelines -TD
3542 gnome-2007|GNOME Terminal snapshot 2.18.1,
3543 use=xterm+pcc2, use=gnome-fc5,
3545 gnome|GNOME Terminal,
3548 # palette is hardcoded...
3549 gnome-256color|GNOME Terminal with xterm 256-colors,
3550 initc@, use=xterm+256color, use=gnome,
3552 # XFCE Terminal 0.2.5.4beta2
3554 # This is based on some of the same source code, e.g., the VTE library, as
3555 # gnome-terminal, but has fewer features, fails more screens in vttest.
3556 # Since most of the terminfo-related behavior is due to the VTE library,
3557 # the terminfo is the same as gnome-terminal.
3561 # Multi-Gnome-Terminal 1.6.2
3563 # This does not use VTE, and does have different behavior (compare xfce and
3565 mgt|Multi GNOME Terminal,
3566 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3568 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
3569 # or not is debatable).
3572 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
3575 # (formerly known as kvt)
3577 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
3578 # simplify this entry (and point out why konsole isn't xterm), we base this on
3579 # xterm-r6. The default keyboard appears to be 'linux'.
3582 # a) konsole implements several features from XFree86 xterm, though none of
3583 # that is documented - except of course in its source code - apparently
3584 # because its implementors are unaccustomed to reading documentation - as
3585 # evidenced by the sparse and poorly edited documentation distributed with
3586 # konsole. Some features such as the 1049 private mode are recognized but
3587 # incorrectly implemented as a duplicate of the 47 private mode.
3588 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
3589 # sends PC-style escapes rather than vt100.
3590 # c) fails vttest menu 3 (Test of character sets) because it does not properly
3591 # parse some control sequences. Also fails vttest Primary Device Attributes
3592 # by sending a bogus code (in the source it says it's supposed to be a
3593 # vt220, which is doubly incorrect because it does not implement vt220
3594 # control sequences except for a few special cases). Treat it as a
3595 # mildly-broken vt102.
3597 # Update for konsole 1.3.2:
3598 # The 1049 private mode works (but see the other xterm screens in vttest).
3599 # Primary Device Attributes now returns the code for a vt100 with advanced
3600 # video option. Perhaps that's intended to be a "mildly-broken vt102".
3602 # Updated for konsole 1.6.4:
3603 # add konsole-solaris
3604 konsole-base|KDE console window,
3606 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
3607 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
3608 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
3609 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
3610 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
3611 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
3612 rmso=\E[27m, rmul=\E[24m,
3613 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3614 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3615 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
3616 use=ecma+color, use=xterm-r6,
3617 konsole-linux|KDE console window with linux keyboard,
3618 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
3619 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
3620 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3621 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3623 konsole-solaris|KDE console window with Solaris keyboard,
3624 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3625 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
3626 # than testing the code.
3627 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
3628 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3629 # The value for kbs reflects local customization rather than the settings used
3630 # for XFree86 xterm.
3631 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
3632 kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R,
3633 kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3634 kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3635 kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS,
3636 khome=\EOH, use=konsole-vt100,
3637 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
3638 # it is still useful for deriving the other entries.
3639 konsole-vt100|KDE console window with vt100 (sic) keyboard,
3640 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
3641 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
3642 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
3643 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3644 khome=\E[H, use=konsole-base,
3645 konsole-vt420pc|KDE console window with vt420 pc keyboard,
3646 kbs=^H, kdch1=\177, use=konsole-vt100,
3647 konsole-16color|klone of xterm-16color,
3648 ncv#32, use=ibm+16color, use=konsole,
3649 # make a default entry for konsole
3650 konsole|KDE console window,
3653 # palette is hardcoded...
3654 konsole-256color|KDE console window with xterm 256-colors,
3655 initc@, use=xterm+256color, use=konsole,
3657 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
3659 # It is nominally a vt102 emulator, with features borrowed from rxvt and
3662 # The function keys are numbered based on shift/control/alt modifiers, except
3663 # that the control-modifier itself is used to spawn a new copy of mlterm (the
3664 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
3665 # how it is configured.
3667 # kf1 to kf12 \E[11~ to \E[24~
3668 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
3669 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
3670 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
3671 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
3672 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
3673 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
3674 # control/shit/alt kf1 to kf12 \E[11;8~ to \E[24;8~
3676 mlterm|multi lingual terminal emulator,
3677 am, eslok, km, mc5i, mir, msgr, npc, xenl,
3678 colors#8, cols#80, it#8, lines#24, pairs#64,
3679 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3680 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3681 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3682 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3683 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3684 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3685 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3686 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
3687 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3688 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
3689 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3690 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3691 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
3692 kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
3693 mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3694 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
3695 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
3696 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
3697 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3698 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3699 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3700 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3701 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
3702 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
3704 # The insert/delete/home/end keys do not respond to modifiers because mlterm
3705 # looks in its termcap to decide which string to send. If it used terminfo
3706 # (when available), it could use the extended names introduced for xterm.
3707 mlterm+pcfkeys|fragment for PC-style fkeys,
3708 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
3709 kDN=\EO1;2B, kDN5=\EO1;5B, kDN6=\EO1;6B, kIC5=\E[2;5~,
3710 kIC6=\E[2;6~, kLFT5=\EO1;5D, kLFT6=\EO1;6D,
3711 kNXT5=\E[6;5~, kNXT6=\E[6;6~, kPRV5=\E[5;5~,
3712 kPRV6=\E[5;6~, kRIT5=\EO1;5C, kRIT6=\EO1;6C, kUP=\EO1;2A,
3713 kUP5=\EO1;5A, kUP6=\EO1;6A,
3715 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
3716 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
3719 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
3720 # but some applications don't work with that.
3721 # It also has an AIX extension
3725 # but the latter does not work correctly.
3727 # The distributed terminfo says it implements hpa and vpa, but they are not
3728 # implemented correctly, using relative rather than absolute positioning.
3730 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
3731 # Since rxvt is not really compatible with xterm, it should be configured as
3732 # "rxvt" or "rxvt-color".
3734 # removed dch/dch1 because they are inconsistent with bce/ech -TD
3735 # remove km as per tack test -TD
3736 rxvt-basic|rxvt terminal base (X Window System),
3737 OTbs, am, bce, eo, mir, msgr, xenl, xon,
3738 cols#80, it#8, lines#24,
3739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3740 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3741 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3742 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3743 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3744 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3745 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
3746 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
3747 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
3748 ind=^J, is1=\E[?47l\E=\E[?1l,
3749 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
3750 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3751 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
3753 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3754 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3755 s0ds=\E(B, s1ds=\E(0, sc=\E7,
3756 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3757 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3758 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3759 use=rxvt+pcfkeys, use=vt220+keypad,
3760 # Key Codes from rxvt reference:
3762 # Note: Shift + F1-F10 generates F11-F20
3764 # For the keypad, use Shift to temporarily override Application-Keypad
3765 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
3766 # is off, escape sequences toggle Application-Keypad setting.
3767 # Also note that values of Home, End, Delete may have been compiled
3768 # differently on your system.
3770 # Normal Shift Control Ctrl+Shift
3771 # Tab ^I ESC [ Z ^I ESC [ Z
3772 # BackSpace ^H ^? ^? ^?
3773 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
3774 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
3775 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3776 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
3777 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
3778 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
3779 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
3780 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
3781 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3782 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
3783 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
3784 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
3785 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
3786 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
3787 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
3788 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
3789 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
3790 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
3791 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
3792 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
3793 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
3794 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
3795 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
3796 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
3797 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
3798 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
3799 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
3800 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
3801 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
3804 # Up ESC [ A ESC [ a ESC O a ESC O A
3805 # Down ESC [ B ESC [ b ESC O b ESC O B
3806 # Right ESC [ C ESC [ c ESC O c ESC O C
3807 # Left ESC [ D ESC [ d ESC O d ESC O D
3808 # KP_Enter ^M ESC O M
3809 # KP_F1 ESC O P ESC O P
3810 # KP_F2 ESC O Q ESC O Q
3811 # KP_F3 ESC O R ESC O R
3812 # KP_F4 ESC O S ESC O S
3813 # XK_KP_Multiply * ESC O j
3814 # XK_KP_Add + ESC O k
3815 # XK_KP_Separator , ESC O l
3816 # XK_KP_Subtract - ESC O m
3817 # XK_KP_Decimal . ESC O n
3818 # XK_KP_Divide / ESC O o
3830 # The source-code for rxvt actually defines mappings for F21-F35, using
3831 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
3832 # are rare, so this entry uses the shift- and control-modifiers as in
3833 # xterm+pcfkeys to define keys past F12.
3835 # kIC is normally not used, since rxvt performs a paste for that (shifted
3836 # insert), unless private mode 35 is set.
3838 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
3839 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
3840 rxvt+pcfkeys|fragment for PC-style fkeys,
3841 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
3842 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
3843 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
3844 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3845 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3846 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3847 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
3848 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
3849 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
3850 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
3851 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
3852 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
3853 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
3854 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3855 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3856 kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
3857 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
3858 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
3859 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
3860 kUP=\E[a, kUP5=\EOa,
3862 rxvt|rxvt terminal emulator (X Window System),
3864 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
3865 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
3866 rxvt-color|rxvt terminal emulator (X Window System),
3868 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
3869 use=xterm+256color, use=rxvt,
3870 rxvt-xpm|rxvt terminal emulator (X Window System),
3872 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
3873 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3875 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
3876 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
3879 # This variant is supposed to work with rxvt 2.7.7 when compiled with
3880 # NO_BRIGHTCOLOR defined. rxvt needs more work...
3881 rxvt-16color|xterm with 16 colors like aixterm,
3882 ncv#32, use=ibm+16color, use=rxvt,
3886 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
3887 # makes its function-keys different from other flavors of rxvt -TD
3888 mrxvt|multitabbed rxvt,
3889 use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
3891 # From: Michael Jennings <mej@valinux.com>
3895 # removed kf0 which conflicts with kf10 -TD
3896 # remove cvvis which conflicts with cnorm -TD
3897 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
3898 # but does otherwise follow the rxvt+pcfkeys model -TD
3899 # remove nonworking flash -TD
3900 # remove km as per tack test -TD
3901 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
3902 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
3903 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
3904 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3905 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3906 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3908 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
3909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3910 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3911 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3912 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3913 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3914 is1=\E[?47l\E>\E[?1l,
3915 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
3916 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
3917 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
3918 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3919 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
3920 rmso=\E[27m, rmul=\E[24m,
3921 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3922 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3924 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3925 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3926 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3927 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
3931 # This is not based on xterm's source...
3932 # vttest shows several problems with keyboard, cursor-movements.
3933 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
3934 xiterm|internationalized terminal emulator for X,
3936 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
3938 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3939 # variant of xterm which is apparently no longer supported, but are interesting
3940 # because they illustrate SVr4 curses mouse controls - T.Dickey
3941 xtermm|xterm terminal emulator (monocrome),
3942 OTbs, am, km, mir, msgr, xenl,
3943 btns#3, cols#80, it#8, lines#24,
3944 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3945 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3946 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
3947 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3948 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3949 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3950 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3951 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3952 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3953 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3954 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3955 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3956 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3957 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3958 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3959 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3960 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3961 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3962 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3964 xtermc|xterm terminal emulator (color),
3965 colors#8, ncv#7, pairs#64,
3966 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3967 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3968 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3971 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3972 # Here's a termcap entry I've been using for xterm_color, which comes
3973 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3974 # color stuff, I also have a status line defined as the window manager
3975 # title bar. [I have translated it to terminfo -- ESR]
3976 xterm-pcolor|xterm with color used for highlights and status line,
3977 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
3978 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
3980 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
3981 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
3982 # chars look like --esr)
3983 hpterm|X-hpterm|hp X11 terminal emulator,
3984 am, da, db, mir, xhp,
3985 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
3986 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
3987 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
3988 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
3989 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
3990 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3991 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
3992 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
3993 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
3994 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
3995 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
3996 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
3997 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
3998 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
3999 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4001 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4002 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4003 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4004 # HPUX 11 provides a color version.
4005 hpterm-color|HP X11 terminal emulator with color,
4009 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4010 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4012 # This entry describes an xterm with Sun-style function keys enabled
4013 # via the X resource setting "xterm*sunFunctionKeys:true"
4014 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4015 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4016 # because we want it to be seen as <kcpy>.
4017 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4018 # with their Sun keyboard labels instead.
4019 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4020 xterm-sun|xterm with sunFunctionKeys true,
4021 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4022 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4023 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4024 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4025 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4026 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4027 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4028 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4029 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4030 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4031 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4032 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4034 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4035 cols#80, lines#24, use=xterm-sun,
4037 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4038 # It corresponds to emu's internal emulation:
4040 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4041 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4042 # fixes: add civis, cnorm, sgr -TD
4043 emu|emu native mode,
4044 am, bce, mir, msgr, xon,
4045 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4046 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4047 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4048 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4049 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
4050 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4051 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4052 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4053 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4054 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4055 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4056 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4057 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4058 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4059 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4060 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4061 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4062 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4064 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4065 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4067 # vt220 Terminfo entry for the Emu emulation, corresponds to
4069 # with NumLock set (to make the keypad transmit kf0-kf9).
4070 # fixes: add am, xenl, corrected sgr0 -TD
4071 emu-220|Emu-220 (vt200-7bit mode),
4073 cols#80, it#8, lines#24, vt#200,
4074 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4075 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4076 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4077 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4078 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4079 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4080 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4081 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4082 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4083 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4084 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4085 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4086 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4087 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4088 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4089 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4090 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4091 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4092 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4093 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4094 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4095 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4096 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4097 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4098 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4099 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4100 # indicate that it emulates more than one terminal, but incompletely.
4102 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4103 # It is based on vt102's entry, with some subtle differences, but also
4105 # supports ANSI colors (except for 'op' string)
4106 # apparently implements alternate screen like xterm
4107 # does not use padding, of course.
4108 mvterm|vv100|SwitchTerm aka mvTERM,
4109 am, eslok, hs, km, mir, msgr, xenl,
4110 colors#8, cols#80, it#8, lines#24, pairs#64,
4111 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4112 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4113 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4114 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4115 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4116 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4117 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4118 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4119 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4120 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4121 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4122 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4123 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4125 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4126 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4127 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4128 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4129 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4130 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4134 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4136 # "mterm -type ansi" sets $TERM to "ansi"
4137 mterm-ansi|ANSI emulation,
4140 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4141 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4142 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4143 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4144 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4145 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4146 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4147 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4148 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4149 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4151 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4152 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4154 # mterm normally sets $TERM to "mterm"
4155 mterm|mouse-sun|Der Mouse term,
4158 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4159 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4160 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4161 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4162 # "mterm -type decansi" sets $TERM to "decansi"
4164 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4165 decansi|ANSI emulation with DEC compatibility hacks,
4166 am, mir, msgr, xenl,
4167 colors#8, it#8, pairs#64,
4168 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4169 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4170 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4171 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4172 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4173 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4174 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4175 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4176 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4177 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4178 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4179 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4180 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4181 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4182 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4183 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4184 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4185 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4186 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4187 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4188 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4189 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4190 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4191 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4192 u7=\E[6n, vpa=\E[%i%p1%dd,
4196 # MGR is a Bell Labs window system lighter-weight than X.
4197 # These entries describe MGR's xterm-equivalent.
4198 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4201 mgr|Bellcore MGR (non X) window system terminal emulation,
4203 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4204 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4205 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4206 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4207 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4208 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4209 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4210 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4211 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4213 mgr-sun|Mgr window with Sun keyboard,
4214 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4215 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4216 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4217 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4218 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4219 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4220 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4221 mgr-linux|Mgr window with Linux keyboard,
4222 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4223 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4224 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4225 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4226 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4228 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4231 # Columbus UNIX virtual terminal. This terminal also appears in
4232 # UNIX 4.0 and successors as line discipline 1 (?), but is
4233 # undocumented and does not really work quite right.
4234 cbunix|cb unix virtual terminal,
4236 cols#80, lines#24, lm#0,
4237 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4238 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4239 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4240 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4241 smso=\Ea^D, smul=\Ea^A,
4242 # (vremote: removed obsolete ":nl@:" -- esr)
4243 vremote|virtual remote terminal,
4245 cols#79, use=cbunix,
4247 pty|4bsd pseudo teletype,
4248 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4249 smso=\Ea$, smul=\Ea!, use=cbunix,
4251 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4252 eterm|gnu emacs term.el terminal emulation,
4255 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4256 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4257 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4258 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4259 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4260 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4261 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4262 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4263 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4266 # Entries for use by the `screen' program by Juergen Weigert,
4267 # Michael Schroeder, Oliver Laumann. The screen and
4268 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4269 # come from University of Wisconsin and may be older.
4270 # (screen: added <cnorm> on ANSI model -- esr)
4272 # 'screen' defines extensions to termcap. Some are used in its terminal
4274 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4275 # AX (bool) Does understand ANSI set default fg/bg color
4276 # (\E[39m / \E[49m).
4277 # S0 (str) Switch charset 'G0' to the specified charset.
4278 # E0 (str) Switch charset 'G0' back to standard charset.
4280 # tested with screen 3.09.08
4281 screen|VT 100/ANSI X3.64 virtual terminal,
4282 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4283 colors#8, cols#80, it#8, lines#24, pairs#64,
4284 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4285 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4286 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4287 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4288 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4289 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4290 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4291 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4292 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4293 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4294 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4295 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4296 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4297 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4298 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4299 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4300 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4301 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4302 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4303 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4304 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4305 S0=\E(%p1%c, use=ecma+color,
4306 # The bce and status-line entries are from screen 3.9.13 (and require some
4307 # changes to .screenrc).
4308 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4310 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4311 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4313 # ======================================================================
4314 # Entries for GNU Screen with 16 colors.
4315 # Those variations permit to benefit from 16 colors palette, and from
4316 # bold font and blink attribute separated from bright colors. But they
4317 # are less portable than the generic "screen" 8 color entries: Their
4318 # usage makes real sense only if the terminals you attach and reattach
4319 # do all support 16 color palette.
4321 screen-16color|GNU Screen with 16 colors,
4322 use=ibm+16color, use=screen,
4324 screen-16color-s|GNU Screen with 16 colors and status line,
4325 use=ibm+16color, use=screen-s,
4327 screen-16color-bce|GNU Screen with 16 colors and BCE,
4328 use=ibm+16color, use=screen-bce,
4330 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
4331 bce, use=ibm+16color, use=screen-s,
4333 # ======================================================================
4334 # Entries for GNU Screen 4.02 with --enable-colors256.
4336 screen-256color|GNU Screen with 256 colors,
4338 initc@, use=xterm+256color, use=screen,
4340 screen-256color-s|GNU Screen with 256 colors and status line,
4342 initc@, use=xterm+256color, use=screen-s,
4344 screen-256color-bce|GNU Screen with 256 colors and BCE,
4346 initc@, use=xterm+256color, use=screen-bce,
4348 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
4350 initc@, use=xterm+256color, use=screen-s,
4352 # ======================================================================
4354 # Read the fine manpage:
4355 # When screen tries to figure out a terminal name for
4356 # itself, it first looks for an entry named "screen.<term>",
4357 # where <term> is the contents of your $TERM variable. If
4358 # no such entry exists, screen tries "screen" (or "screen-w"
4359 # if the terminal is wide (132 cols or more)). If even this
4360 # entry cannot be found, "vt100" is used as a substitute.
4362 # Notwithstanding the manpage, screen uses its own notion of the termcap
4363 # and some keys from "screen.<term>" are ignored. Here is an entry which
4364 # covers those (tested with screen 4.00.02) -TD
4365 screen+fkeys|function-keys according to screen,
4366 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
4369 # Here are a few customized entries which are useful -TD
4372 # (a) screen does not support invis.
4373 # (b) screen's implementation of bw is incorrect according to tack.
4374 # (c) screen appears to hardcode the strings for khome/kend, making it
4375 # necessary to override the "use=" clause's values (screen+fkeys).
4376 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4377 # which is NOT the same as the terminfo screen.<term>.
4378 # (e) when screen finds one of these customized entries, it sets $TERM to
4379 # match. Hence, no "screen.xterm" entry is provided, since that would
4380 # create heartburn for people running remote xterm's.
4382 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
4383 # since the default translations override the built-in keycode
4384 # translation. They are suppressed here to show what is tested by tack.
4385 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4387 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
4388 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
4389 use=screen+fkeys, use=xterm-new,
4390 # xterm-r6 does not really support khome/kend unless it is propped up by
4391 # the translations resource.
4392 screen.xterm-r6|screen customized for X11R6 xterm,
4393 bw, use=screen+fkeys, use=xterm-r6,
4394 # Color applications running in screen and TeraTerm do not play well together
4395 # on Solaris because Sun's curses implementation gets confused.
4396 screen.teraterm|disable ncv in teraterm,
4398 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4399 use=screen+fkeys, use=screen,
4401 screen.rxvt|screen in rxvt,
4403 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4404 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4405 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4406 # fix the backspace key
4407 screen.linux|screen in linux console,
4409 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4411 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
4412 cols#132, use=screen,
4414 screen2|old VT 100/ANSI X3.64 virtual terminal,
4415 cols#80, it#8, lines#24,
4416 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
4417 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4418 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4419 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4420 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
4421 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4422 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
4423 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
4424 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
4425 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
4426 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
4427 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
4428 screen3|older VT 100/ANSI X3.64 virtual terminal,
4430 cols#80, it#8, lines#24,
4431 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
4432 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4433 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4434 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4435 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4436 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4437 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
4438 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
4439 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
4440 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
4441 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
4442 smul=\E[4m, tbc=\E[3g,
4444 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
4445 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
4446 # been maintained until recently by the National Center for Supercomputer
4447 # Applications, and it is feature rich, stable and free. It can be downloaded
4448 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
4449 # xterm+sl, and the docs at NCSA. It works well.
4451 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
4452 # The terminal options should be set as follows:
4453 # Xterm sequences ON
4454 # use VT wrap mode ON
4455 # use Emacs arrow keys OFF
4456 # CTRL-COMND is Emacs meta ON
4458 # answerback string: "ncsa-vt220-8"
4459 # setup keys: all disabled
4461 # Application mode is not used.
4463 # Other special mappings:
4470 # PAGEDOWN Next Screen
4472 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
4475 # The status-line manipulation is a mapping of the xterm-compatible control
4476 # sequences for setting the window-title. So you must use tsl and fsl in
4477 # pairs, since the latter ends the string that is loaded to the window-title.
4478 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4479 am, hs, km, mir, msgr, xenl,
4480 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4481 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4482 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4483 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4484 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4485 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4486 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4487 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4488 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
4489 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
4490 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
4491 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
4492 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4493 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
4494 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
4495 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
4496 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
4497 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
4498 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
4499 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
4500 rmso=\E[27m, rmul=\E[24m,
4501 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
4502 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4503 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
4504 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
4505 u8=\E[?62;1;6c, use=ansi+enq,
4506 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4507 use=ncsa-m, use=klone+color,
4508 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4510 dsl@, fsl@, tsl@, use=ncsa,
4511 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4513 dsl@, fsl@, tsl@, use=ncsa-m,
4515 # The documented function-key mapping refers to the Apple Extended Keyboard
4516 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
4517 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
4518 # some keyboards and many applications require these as F1-F4.
4520 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
4521 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4522 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4523 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
4524 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
4525 kf8=\E[19~, kf9=\E[20~, use=ncsa,
4527 #### Pilot Pro Palm-Top
4529 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
4530 # http://www.ai/~iang/TGssh/
4531 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
4534 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
4535 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
4536 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
4539 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
4540 # These entries are for the Embeddable Linux Kernel System (ELKS)
4541 # project - an heavily stripped down Linux to be run on 16 bit
4542 # boxes or, eventually, to be used in embedded systems - and have been
4543 # adapted from the stock ELKS termcap. The project itself looks stalled,
4544 # and the latest improvements I know of date back to March 2000.
4546 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
4547 # as an added bonus, this deals with all the capabilities common to
4548 # both VT52 and ANSI (or, eventually, "special") modes.
4550 elks-glasstty|ELKS glass-TTY capabilities,
4552 cols#80, it#8, lines#25,
4553 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
4556 elks-vt52|ELKS vt52 console,
4557 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
4558 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
4559 home=\EH, use=elks-glasstty,
4561 elks-ansi|ELKS ANSI console,
4562 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4563 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4564 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
4566 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
4567 # instead of VT52, but the "elks" entry still refers to the latter.
4569 elks|default ELKS console,
4572 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
4573 # one but in screen size
4575 sibo|ELKS SIBO console,
4576 cols#61, it#8, lines#20, use=elks-vt52,
4578 ######## COMMERCIAL WORKSTATION CONSOLES
4584 # This is from the OSF/1 Release 1.0 termcap file
4585 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
4588 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4589 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4590 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
4591 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
4592 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4597 # :is1: resets scrolling region in case a previous user had used "tset vt100"
4598 oldsun|Sun Microsystems Workstation console,
4599 OTbs, am, km, mir, msgr,
4600 cols#80, it#8, lines#34,
4601 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
4602 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4603 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4604 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4605 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4606 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
4607 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4608 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
4609 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
4610 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
4611 sun-il|Sun Microsystems console with working insert-line,
4614 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4615 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4616 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4617 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4618 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4619 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
4620 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
4621 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
4622 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
4623 knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
4624 kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
4625 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
4626 u8=\E[1t, u9=\E[11t,
4627 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
4628 # flake out on the last line. Unfortunately, without them the terminal has no
4630 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
4631 il@, il1@, use=sun-il,
4632 # If you are using an SS5, change the sun definition to use sun-ss5.
4633 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
4636 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
4637 sun-s|Sun Microsystems Workstation window with status line,
4639 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
4640 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
4642 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
4643 sun-48|Sun 48-line window,
4644 cols#80, lines#48, use=sun,
4645 sun-34|Sun 34-line window,
4646 cols#80, lines#34, use=sun,
4647 sun-24|Sun 24-line window,
4648 cols#80, lines#24, use=sun,
4649 sun-17|Sun 17-line window,
4650 cols#80, lines#17, use=sun,
4651 sun-12|Sun 12-line window,
4652 cols#80, lines#12, use=sun,
4653 sun-1|Sun 1-line window for sysline,
4656 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
4657 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
4658 ich1@, rmir@, smir@, use=sun,
4659 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
4661 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
4662 sun-type4|Sun Workstation console with type 4 keyboard,
4663 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
4664 kcuu1=\E[215z, use=sun-il,
4666 # Most of the current references to sun-color are from users wondering why this
4667 # is the default on install. Details from reading the wscons manpage, adding
4668 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
4669 # when those were added -TD
4670 sun-color|Sun Microsystems Workstation console with color support (IA systems),
4672 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
4673 cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
4675 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4676 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4682 # (wsiris: this had extension capabilities
4683 # :HS=\E7F2:HE=\E7F7:\
4684 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
4685 # See the note on Iris extensions near the end of this file.
4686 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
4687 # <flash> from BRL -- esr)
4688 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
4689 OTbs, OTnc, OTpt, am,
4690 OTkn#3, cols#80, it#8, lines#40,
4691 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
4692 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
4693 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
4694 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
4695 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
4696 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
4697 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
4698 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
4703 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
4704 # environment). Note: these have nothing to do with Sony's News workstation
4708 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
4709 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
4710 psterm|psterm-basic|NeWS psterm-80x34,
4711 OTbs, am, hs, km, ul,
4712 cols#80, it#8, lines#34,
4713 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
4714 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
4715 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
4716 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
4717 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
4718 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
4719 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
4721 psterm-96x48|NeWS psterm 96x48,
4722 cols#96, lines#48, use=psterm,
4723 psterm-90x28|NeWS psterm 90x28,
4724 cols#90, lines#28, use=psterm,
4725 psterm-80x24|NeWS psterm 80x24,
4726 cols#80, lines#24, use=psterm,
4727 # This is a faster termcap for psterm. Warning: if you use this termcap,
4728 # some control characters you type will do strange things to the screen.
4729 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
4730 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
4731 OTbs, am, hs, km, ul,
4732 cols#80, it#8, lines#34,
4733 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
4734 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
4735 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
4736 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4737 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
4738 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
4739 smso=^Oo, smul=^Ou, tsl=^Ol,
4743 # Use `glasstty' for the Workspace application
4746 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
4749 cols#80, it#8, lines#24,
4750 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4751 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4752 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
4753 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
4754 nextshell|NeXT Shell application,
4757 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
4760 #### Sony NEWS workstations
4763 # (news-unk: this had :KB=news: -- esr)
4764 news-unk|SONY NEWS vt100 emulator common entry,
4765 OTbs, OTpt, am, xenl,
4767 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
4768 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4769 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
4770 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
4771 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
4772 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
4773 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
4774 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
4775 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
4776 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4777 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
4778 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4780 # (news-29: this had :TY=ascii: --esr)
4782 lines#29, use=news-unk,
4783 # (news-29-euc: this had :TY=euc: --esr)
4786 # (news-29-sjis: this had :TY=sjis: --esr)
4790 # (news-33: this had :TY=ascii: --esr)
4792 lines#33, use=news-unk,
4793 # (news-33-euc: this had :TY=euc: --esr)
4796 # (news-33-sjis: this had :TY=sjis: --esr)
4800 # (news-42: this had :TY=ascii: --esr)
4802 lines#42, use=news-unk,
4803 # (news-42-euc: this had :TY=euc: --esr)
4806 # (news-42-sjis: this had :TY=sjis: --esr)
4810 # NEWS-OS old termcap entry
4812 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
4813 news-old-unk|SONY NEWS vt100 emulator common entry,
4814 OTbs, OTpt, am, xenl,
4816 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
4817 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4818 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
4819 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
4820 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4821 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
4822 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4823 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4824 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4826 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
4827 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
4830 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4833 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
4834 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
4836 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
4839 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
4840 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
4843 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4846 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
4847 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
4850 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4853 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
4854 # also the alias vt100-bm.
4855 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
4858 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
4861 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
4862 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
4865 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4868 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
4869 news28|sony vt100 emulator 28 lines,
4872 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
4875 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
4876 news29|news28-a|sony vt100 emulator 29 lines,
4878 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
4881 # (news511: this had :TY=sjis: --esr)
4882 nwp511|nwp-511|nwp-511 vt100,
4883 OTbs, OTpt, am, xenl,
4885 clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
4886 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
4887 ed=\E[J$<30/>, el=\E[K$<3/>,
4888 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
4889 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
4890 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
4891 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
4892 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
4893 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
4894 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
4895 # (news517: this had :TY=sjis:. --esr)
4896 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
4899 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
4900 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
4901 tsl=\E[1$}\E[;%df, use=vt200,
4902 # (news517-w: this had :TY=sjis:. --esr)
4903 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
4906 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
4907 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
4908 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
4909 tsl=\E[1$}\E[;%df, use=vt200,
4911 #### Common Desktop Environment
4914 # This ships with Sun's CDE in Solaris 2.5
4915 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
4916 dtterm|CDE desktop terminal,
4917 am, mir, msgr, xenl, xon,
4918 cols#80, it#8, lines#24, lm#0, ncv@,
4919 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4920 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4921 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4922 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4923 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4924 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4925 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4926 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4927 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
4928 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
4929 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
4930 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4931 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4932 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4933 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4934 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4935 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4936 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4937 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4938 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
4940 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4941 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
4942 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
4944 #### Non-Unix Consoles
4947 ### EMX termcap.dat compatibility modes
4949 # Keypad: Home=\0G Up=\0H PrPag=\0I
4950 # ka1,kh kcuu1 kpp,ka3
4952 # Left=\0K 5=\0L Right=\0M
4955 # End=\0O Down=\0P NxPag=\0Q
4956 # kc1,kend kcud1 kc3,knp
4961 # On keyboard with 12 function keys,
4962 # shifted f-keys: F13-F24
4963 # control f-keys: F25-F36
4964 # alt f-keys: F37-F48
4965 # The shift/control/alt keys do not modify each other, but alt overrides both,
4966 # and control overrides shift.
4968 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
4969 # no_color_video to inform the application that standout(1), underline(2)
4970 # reverse(4) and invisible(64) don't work with color.
4971 emx-base|DOS special keys,
4974 bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
4975 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
4976 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
4977 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
4978 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
4979 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
4980 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
4981 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
4982 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
4983 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
4984 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
4985 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
4988 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
4989 # a Unix-style environment used on OS/2. (Note that the suffix makes some
4990 # names longer than 14 characters, the nominal maximum).
4992 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
4993 ansi-emx|ANSI.SYS color,
4994 am, bce, eo, mir, msgr, xon,
4995 colors#8, cols#80, it#8, lines#25, pairs#64,
4996 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4997 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
4998 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
4999 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5000 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5001 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5002 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5003 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5004 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5005 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5006 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5007 u9=\E[c, use=emx-base,
5008 # nice colors for Emacs (white on blue, mode line white on cyan)
5009 ansi-color-2-emx|ANSI.SYS color 2,
5010 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5011 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5012 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5013 smul=\E[1;36;44m, use=ansi-emx,
5014 # nice colors for Emacs (white on black, mode line black on cyan)
5015 ansi-color-3-emx|ANSI.SYS color 3,
5016 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5017 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5018 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5019 smul=\E[0;36;40m, use=ansi-emx,
5020 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5022 cols#80, it#8, lines#24,
5023 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5024 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5025 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5026 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5027 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5028 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5031 # Use this for cygwin32 (tested with beta 19.1)
5032 # underline is colored bright magenta
5033 # shifted kf1-kf12 are kf11-kf22
5034 cygwinB19|ansi emulation for cygwin32,
5035 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5036 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5037 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5038 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5039 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5040 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5041 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5044 # Use this for cygwin (tested with version 1.1.0).
5045 # I've combined pcansi and linux. Some values of course were different and
5046 # I've indicated which of these were and which I used.
5047 # Cheers, earnie_boyd@yahoo.com
5048 # several changes based on running with tack and comparing with older entry -TD
5049 # more changes from csw:
5051 # remove eo [erase overstrike with blank]
5052 # change clear was \E[H\E[J now \E[2J (faster?)
5055 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5057 # add cub [cursor back param]
5058 # add cuf [cursor forward param]
5059 # add cuu [cursor up param]
5060 # add cud [cursor down param]
5061 # add hs [has status line]
5062 # add fsl [return from status line]
5063 # add tsl [go to status line]
5064 # add smacs [Start alt charset] (not sure if this works)
5065 # add rmacs [End alt charset] (ditto)
5066 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5067 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5068 # add kb2 [center of keypad]
5069 # add u8 [user string 8] \E[?6c
5070 # add el [clear to end of line] \E[K
5072 # cnorm [make cursor normal] not implemented
5073 # flash [flash] not implemented
5074 # blink [blink] not implemented very usefully in cygwin? \E[5m
5075 # dim [dim] not implemented very usefully in cygwin? \E[2m
5076 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5077 # kNXT [shifted next key] not implemented
5078 # kPRV [shifted prev key] not implemented
5079 # khome [home key] really is \E[1~ NOT \E[H
5080 # tbc [clear tab stops] not implemented
5081 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5082 # smpch [Start PC charset] is \E[11m, same as smacs
5083 # rmpch [End PC charset] is \E[10m, same as rmacs
5084 # mir [move in insert mode] fails in tack?
5085 # bce [back color erase] causes problems with change background color?
5086 # cvvis [make cursor very visible] causes a stackdump when testing with
5087 # testcurs using the output option? \E[?25h\E[?8c
5088 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5089 # ech [erase characters param] broken \E[%p1%dX
5090 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5093 # Remove cbt since it does not work in current cygwin
5094 # Add 'mir' and 'in' flags based on tack
5095 cygwin|ansi emulation for Cygwin,
5096 am, hs, mir, msgr, xon,
5097 colors#8, it#8, pairs#64,
5098 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5099 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5100 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5101 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5102 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5103 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5104 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5105 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5106 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5107 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5108 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5109 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5110 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5111 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5112 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5113 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5114 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5115 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5116 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5117 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5118 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5119 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5120 vpa=\E[%i%p1%dd, use=vt102+enq,
5122 # I've supplied this so that you can help test new values and add other
5123 # features. Cheers, earnie_boyd@yahoo.com.
5125 # Some features are from pcansi. The op value is from linux. Function-keys
5126 # are from linux. These have been tested not to cause problems. xenl was in
5127 # this list, but DOES cause problems so it has been removed
5128 cygwinDBG|Debug Version for Cygwin,
5129 am, eo, mir, msgr, xon,
5130 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5131 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5132 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5133 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5134 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5135 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5136 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5137 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5138 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5139 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5140 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5141 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5142 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5143 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5144 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5145 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5146 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5147 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5148 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5149 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5150 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5151 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5152 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5153 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5154 smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
5157 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5158 # encodings used by other x86 environments. All others are invented for DJGPP.
5159 # Oddly enough, while several combinations of modifiers are tabulated, there is
5160 # none for shifted cursor keys.
5212 # Ctrl-Delete \E[43~
5213 # Ctrl-Down Arrow \E[38~
5216 # Ctrl-Insert \E[42~
5217 # Ctrl-Left Arrow \E[39~
5218 # Ctrl-Page Down \E[46~
5219 # Ctrl-Page Up \E[45~
5220 # Ctrl-Right Arrow \E[40~
5221 # Ctrl-Up Arrow \E[37~
5237 # Alt-Down Arrow \E[60~
5241 # Alt-Left Arrow \E[61~
5242 # Alt-Page Down \E[68~
5243 # Alt-Page Up \E[67~
5244 # Alt-Right Arrow \E[62~
5245 # Alt-Up Arrow \E[59~
5274 djgpp|ansi emulation for DJGPP alpha,
5275 am, bce, msgr, xhp, xon, xt,
5276 colors#8, it#8, pairs#64,
5277 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5278 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5279 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5280 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5281 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5282 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5283 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5284 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5285 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5286 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5287 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5288 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5289 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5290 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5291 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5292 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5293 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5294 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5295 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5297 djgpp203|Entry for DJGPP 2.03,
5299 cols#80, it#8, lines#25,
5300 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5303 djgpp204|Entry for DJGPP 2.04,
5305 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5306 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5307 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5308 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5309 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5310 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5311 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5312 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5313 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5314 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5315 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5316 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5317 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5318 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5319 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
5320 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
5322 # This is tested using U/Win's telnet. Scrolling is omitted because it is
5323 # buggy. Another odd bug appears when displaying "~" in alternate character
5324 # set (the emulator spits out error messages). Compare with att6386 -TD
5325 uwin|U/Win 3.2 console,
5326 am, eo, in, msgr, xenl, xon,
5327 colors#8, it#8, ncv#58, pairs#64,
5328 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5329 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5330 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
5331 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5332 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
5333 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
5334 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5335 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
5336 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
5337 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
5338 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
5339 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
5340 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5341 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
5342 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
5343 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
5345 # This entry fits the Windows NT console when the _POSIX_TERM environment
5346 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
5347 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
5348 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
5349 # systems is not, and (surprise!) they match very well.
5351 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
5352 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
5353 # are the installation instructions a pile of mind-numbing bureaucratese,
5354 # but the termcap entry is actually broken and unusable as given; the :do:
5355 # capability is misspelled "d".
5357 # To use this, you need to a bunch of environment variables:
5359 # SET _POSIX_TERM=on
5361 # SET TERMCAP=location of termcap file in POSIX file format
5362 # which is case-sensitive.
5363 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
5366 # Important note: setting the TMP environment variable in POSIX style renders
5367 # it incompatible with a lot of other applications, including Visual C++. So
5368 # you should have a separate command window just for vi. All the other
5369 # variables may be permanently set in the Control Panel\System applet.
5371 # You can find out more about the restrictions of this facility at
5372 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
5374 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
5375 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
5377 cols#80, it#8, lines#25,
5378 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5379 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5380 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
5381 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
5382 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
5383 # From: jew@venus.sunquest.com
5384 # Date: 19 Feb 93 23:41:07 GMT
5385 # Here's a combination of ansi and vt100 termcap
5386 # entries that works nearly perfectly for me
5387 # (Gateway 2000 Handbook and Microsoft Works 3.0):
5388 pcmw|PC running Microsoft Works,
5390 cols#80, it#8, lines#24, vt#3,
5391 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
5392 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
5393 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
5394 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
5395 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
5396 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5397 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
5398 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
5399 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5400 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5401 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5404 # From: Federico Bianchi
5405 # This is the entry for the OpenNT terminal.
5406 # The ntconsole name is for backward compatability.
5407 # This is for OpenNT 2.0 and later.
5408 # Later OpenNT was renamed to Interix.
5410 # Presently it is distributed by Microsoft as Services For Unix (SFU).
5411 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
5412 # the documentation dates from 1.9.9e) -TD
5414 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
5416 colors#8, cols#80, lines#25, ncv#3, pairs#64,
5417 acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
5418 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
5419 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
5420 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5421 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5422 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5423 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5424 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
5425 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
5426 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
5427 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
5428 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
5429 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
5430 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
5431 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
5432 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
5433 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
5434 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
5435 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
5436 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
5437 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
5438 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
5439 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
5440 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
5441 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5442 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
5443 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
5445 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
5446 lines#35, use=opennt,
5448 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
5449 lines#50, use=opennt,
5451 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
5452 lines#60, use=opennt,
5454 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
5455 lines#100, use=opennt,
5457 # OpenNT wide terminals
5458 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
5459 cols#125, use=opennt,
5461 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
5462 lines#35, use=opennt-w,
5464 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
5465 lines#50, use=opennt-w,
5467 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
5468 lines#60, use=opennt-w,
5470 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
5471 cols#132, use=opennt,
5473 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
5474 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
5475 rmcup@, smcup@, use=opennt,
5477 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
5478 lines#35, use=opennt-nti,
5480 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
5481 lines#50, use=opennt-nti,
5483 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
5484 lines#60, use=opennt-nti,
5486 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
5487 lines#100, use=opennt-nti,
5489 ######## COMMON TERMINAL TYPES
5491 # This section describes terminal classes and maker brands that are still
5492 # quite common, but have proprietary command sets not blessed by ANSI.
5497 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
5498 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
5499 # Acer has a web site at http://www.acer.com.
5501 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
5502 # His comments suggest they were shipped with the system.
5505 # (altos2: had extension capabilities
5506 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5507 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5508 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5509 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5510 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5511 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
5512 # :HL=^AP\r:SP=\E[i:\
5513 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5514 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
5515 # Comparison with the k* capabilities makes it obvious that the c* things are
5516 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
5517 # :sr: was given as a boolean-- esr)
5518 altos2|alt2|altos-2|altos II,
5519 cols#80, it#8, lines#24, xmc#0,
5520 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
5521 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
5522 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
5523 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
5524 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
5525 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
5526 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
5527 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5528 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5529 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5530 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5531 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
5532 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
5533 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
5534 # (altos3: had extension capabilities
5535 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5536 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5537 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5538 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5539 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5540 # :HL=^AP\r:SP=\E[i:\
5541 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5542 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
5543 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
5544 altos4|alt4|altos-4|altos IV,
5546 # (altos7: had extension capabilities:
5547 # :GG#0:GI=\EH8:GF=\EH7:\
5548 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5549 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5550 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5551 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5552 # Comparison with the k* capabilities makes it obvious that the c* things are
5553 # shift keys. I have renamed them to keys 32 and up accordingly. I have
5554 # also made this entry relative to adm12 in order to give it an <sgr>. The
5555 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
5556 altos7|alt7|altos VII,
5558 cols#80, lines#24, xmc#0,
5559 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
5560 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5561 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5562 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
5564 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
5565 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
5566 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
5567 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5568 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5569 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5570 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5571 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
5572 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
5573 rmir=\Er, smir=\Eq, use=adm+sgr,
5574 altos7pc|alt7pc|altos PC VII,
5575 kend=\ET, use=altos7,
5577 #### Hewlett-Packard (hp)
5580 # 8000 Foothills Blvd
5581 # Roseville, CA 95747
5582 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
5583 # 1-(800)-633-3600 (General customer support)
5586 # As of March 1998, HP no longer has any terminals in production.
5587 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
5588 # supported (they still have parts). So are the 2392a and 2394a.
5589 # See the WORKSTATION CONSOLES section for the 700s.
5592 # Generic HP terminal - this should (hopefully) work on any HP terminal.
5593 hpgeneric|hp|hewlett-packard generic terminal,
5594 OTbs, OTpt, am, da, db, mir, xhp,
5595 cols#80, lines#24, lm#0, vt#6,
5596 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5597 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
5598 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
5599 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
5600 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
5603 hp110|hewlett-packard model 110 portable,
5604 lines#16, use=hpgeneric,
5606 hp+pfk+cr|hp function keys with CR,
5607 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
5608 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
5610 hp+pfk-cr|hp function keys w/o CR,
5611 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
5614 # The hp2621s use the same keys for the arrows and function keys,
5615 # but not separate escape sequences. These definitions allow the
5616 # user to use those keys as arrow keys rather than as function
5618 hp+pfk+arrows|hp alternate arrow definitions,
5619 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
5620 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
5621 kll=\Eq\r, kri=\Es\r,
5623 hp+arrows|hp arrow definitions,
5624 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5625 kind=\ES, kll=\EF, kri=\ET,
5627 # Generic stuff from the HP 262x series
5629 hp262x|HP 262x terminals,
5631 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
5632 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5633 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5634 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
5635 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
5636 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
5637 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
5639 # Note: no <home> on HPs since that homes to top of memory, not screen.
5640 # Due to severe 2621 braindamage, the only way to get the arrow keys to
5641 # transmit anything at all is to turn on the function key labels
5642 # with <smkx>, and even then the user has to hold down shift!
5643 # The default 2621 turns off the labels except when it has to to
5644 # enable the function keys. If your installation prefers labels
5645 # on all the time, or off all the time (at the "expense" of the
5646 # function keys), use 2621-nl or 2621-wl.
5648 # Note: there are newer ROMs for 2621's that allow you to set
5649 # strap A so the regular arrow keys xmit \EA, etc, as with the
5650 # 2645. However, even with this strap set, the terminal stops
5651 # xmitting if you reset it, until you unset and reset the strap!
5652 # Since there is no way to set/unset the strap with an escape
5653 # sequence, we don't use it in the default.
5654 # If you like, you can use 2621-ba (brain-damaged arrow keys).
5655 hp2621-ba|2621 w/new rom and strap A set,
5656 rmkx@, smkx@, use=hp+arrows, use=hp2621,
5658 # hp2621 with function labels. Most of the time they are off,
5659 # but inside vi, the function key labels appear. You have to
5660 # hold down shift to get them to xmit.
5661 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
5662 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
5666 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
5667 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
5668 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
5669 use=hp+pfk+cr, use=hpgeneric,
5671 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
5672 hp2621p|hp 2621 with printer,
5673 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
5675 hp2621p-a|hp2621p with fn as arrows,
5676 use=hp+pfk+arrows, use=hp2621p,
5678 # hp2621 with k45 keyboard
5679 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
5680 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5681 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
5683 # 2621 using all 48 lines of memory, only 24 visible at any time.
5684 hp2621-48|48 line 2621,
5686 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
5689 # 2621 with no labels ever. Also prevents vi delays on escape.
5690 hp2621-nl|hp 2621 with no labels,
5691 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
5694 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
5697 hp2621-nt|hp 2621 w/no tabs,
5700 # Hp 2624 B with 4 or 10 pages of memory.
5702 # Some assumptions are made with this entry. These settings are
5703 # NOT set up by the initialization strings.
5705 # Port Configuration
5710 # Terminal Configuration
5716 # Note: the 2624 DOES have a true <home>, believe it or not!
5718 # The 2624 has an "error line" to which messages can be sent.
5719 # This is CLOSE to what is expected for a "status line". However,
5720 # after a message is sent to the "error line", the next carriage
5721 # return is EATEN and the "error line" is turned back off again!
5722 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
5724 # This entry supports emacs (and any other program that uses raw
5725 # mode) at 4800 baud and less. I couldn't get the padding right
5728 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
5729 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
5732 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
5733 use=hp+labels, use=scrhp,
5735 # This hp2626 entry does not use any of the fancy windowing stuff
5738 # Indeed, terminfo does not yet handle such stuff. Since changing
5739 # any window clears memory, it is probably not possible to use
5740 # this for screen opt.
5742 # ed is incredibly slow most of the time - I am guessing at the
5743 # exact padding. Since the terminal uses xoff/xon this is intended
5744 # only for cost computation, so that the terminal will prefer el
5745 # or even dl1 which is probably faster!
5747 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
5748 # extra slow on the last line of the window.
5750 # The padding probably should be changed.
5752 hp2626|hp2626a|hp2626p|hp 2626,
5755 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
5756 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
5757 use=hp+labels, use=scrhp,
5759 # This entry is for sysline. It allocates a 23 line window with
5760 # a 115 line workspace for regular use, and a 1 line window for
5763 # This assumes port 2 is being used.
5764 # Turn off horizontal line, Create ws #1 with 115 lines,
5765 # Create ws #2 with 1 line, Create window #1 lines 1-23,
5766 # Create window #2 lines 24-24, Attach cursor to workspace #1.
5767 # Note that this clears the tabs so it must be done by tset before
5770 hp2626-s|hp 2626 using only 23 lines,
5773 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
5774 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
5775 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
5776 # Force terminal back to 24 lines after being 23.
5777 hp2626-ns|hp 2626 using all 24 lines,
5778 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
5780 # Various entries useful for small windows on 2626.
5781 hp2626-12|hewlett-packard 2626 12 lines,
5782 lines#12, use=hp2626,
5783 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
5784 cols#40, lines#12, use=hp2626,
5785 hp2626-x40|hewlett-packard 2626 40 columns,
5786 cols#40, use=hp2626,
5787 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
5788 lines#11, use=hp2626-s,
5791 # hp2627 color tubes from University of Wisconsin
5793 hp2627a-rev|hp 2627 with reverse video colors,
5794 cr=^M, cud1=^J, ht=^I, ind=^J,
5795 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
5796 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
5797 smul=\E&dD\E&v1S, use=hp2621-nl,
5798 hp2627a|hp 2627 color terminal with no labels,
5799 cr=^M, cud1=^J, ht=^I, ind=^J,
5800 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
5801 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
5802 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
5804 hp2627c|hp 2627 color (cyan) terminal with no labels,
5805 cr=^M, cud1=^J, ht=^I, ind=^J,
5806 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
5807 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
5809 # hp2640a doesn't have the Y cursor addressing feature, and C is
5810 # memory relative instead of screen relative, as we need.
5813 cup@, rmkx@, smkx@, use=hp2645,
5815 hp2640b|hp2644a|hp 264x series,
5816 rmkx@, smkx@, use=hp2645,
5818 # (hp2641a: removed unknown :gu: -- esr)
5819 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
5820 am, da, db, mir, xhp,
5822 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5823 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
5824 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
5825 if=/usr/share/tabset/std, il1=\EL, ind=^J,
5826 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5827 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
5830 # This terminal should be used at 4800 baud or less. It needs padding for
5831 # plain characters at 9600, I guessed at an appropriate cr delay. It really
5832 # wants ^E/^F handshaking, but that doesn't work well even if you write
5833 # software to support it.
5834 hp2645|hp45|HP 2645 series,
5836 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
5837 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
5838 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
5839 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
5841 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
5842 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
5843 # You should use this terminal at 4800 baud or less.
5844 hp2648|hp2648a|HP 2648a graphics terminal,
5845 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
5846 dch1=\EP$<7>, ip=$<5>, use=hp2645,
5848 # The HP 150 terminal is a fairly vanilla HP terminal, with the
5849 # clreol standout problem. It also has graphics capabilities and
5850 # a touch screen, which we don't describe here.
5851 hp150|hewlett packard Model 150,
5854 # HP 2382a terminals, "the little ones." They don't have any
5855 # alternate character set support and sending out ^N/^O will
5856 # leave the screen blank.
5857 hp2382a|hp2382|hewlett packard 2382a,
5861 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
5863 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
5864 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
5866 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
5867 use=hp+pfk+arrows, use=hp2621-fl,
5869 # newer hewlett packard terminals
5871 newhpkeyboard|generic entry for HP extended keyboard,
5872 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5873 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5874 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
5875 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
5878 newhp|generic entry for new hewlett packard terminals,
5879 am, bw, mir, xhp, xon,
5880 cols#80, lines#24, pb#4800,
5881 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
5882 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
5883 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
5884 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
5885 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
5886 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
5887 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
5888 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
5889 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
5890 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
5891 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
5892 tbc=\E3, use=newhpkeyboard,
5894 memhp|memory relative addressing for new HP ttys,
5896 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
5897 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
5898 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
5899 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
5901 scrhp|screen relative addressing for new HP ttys,
5902 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
5903 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
5904 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
5905 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
5906 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
5908 # (hp+labels: added label values from a BRL termcap -- esr)
5909 hp+labels|"standard" label info for new HP ttys,
5911 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
5912 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
5913 rmln=\E&j@, smln=\E&jB,
5915 hp+printer|"standard" printer info for HP ttys,
5916 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
5919 # The new hp2621b is kind of a cross between the old 2621 and the
5920 # new 262x series of machines. It has dip-switched options.
5921 # The firmware has a bug in it such that if you give it a null
5922 # length label, the following character is eaten!
5923 hp2621b|hp 2621b with old style keyboard,
5924 lh#1, lm#48, lw#8, nlab#8,
5925 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5926 kind=\ET, kll=\EF, kri=\ES,
5927 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
5928 smln=\E&jB, use=hp2621,
5930 hp2621b-p|hp 2621b with printer,
5931 use=hp+printer, use=hp2621b,
5933 # hp2621b - new 2621b with new extended keyboard
5934 # these are closer to the new 26xx series than the other 2621b
5935 hp2621b-kx|hp 2621b with extended keyboard,
5936 use=newhpkeyboard, use=hp2621b,
5938 hp2621b-kx-p|hp 2621b with new keyboard & printer,
5939 use=hp+printer, use=hp2621b-kx,
5941 # Some assumptions are made in the following entries.
5942 # These settings are NOT set up by the initialization strings.
5944 # Port Configuration
5945 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
5947 # Terminal Configuration
5948 # InhHndShk(G)=Yes InhDC2(H)=Yes
5949 # XmitFnctn(A)=No InhEolWrp=No
5952 # Hp 2622a & hp2623a display and graphics terminals
5954 hp2622|hp2622a|hp 2622,
5957 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
5959 # The 2623 is a 2622 with extra graphics hardware.
5960 hp2623|hp2623a|hp 2623,
5963 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
5964 use=hp+printer, use=hp2624,
5966 # The hewlett packard B can have an optional extra 6 pages of memory.
5967 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
5970 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
5971 lm#240, use=hp2624b-p,
5973 # Color manipulations for HP terminals
5974 hp+color|hp with colors,
5976 colors#16, ncv#17, pairs#7,
5977 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
5978 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
5979 op=\E&v0S, scp=\E&v%p1%dS,
5981 # <is2> sets the screen to be 80 columns wide
5982 hp2397a|hp2397|hewlett packard 2397A color terminal,
5983 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
5985 # HP 700/44 Setup parameters:
5986 # Terminal Mode HP-PCterm
5987 # Inhibit Auto Wrap NO
5988 # Status Line Host Writable
5989 # PC Character Set YES
5990 # Twenty-Five Line Mode YES
5991 # XON/XOFF @128 or 64 (sc)
5992 # Keycode Mode NO or YES (sc)
5993 # Backspace Key BS or BS/DEL
5995 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
5996 # \E\\? does not turn off keycode mode
5997 # <smsc> sets alternate start/stop; keycode on
5998 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6001 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6002 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6003 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6004 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6005 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6007 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6008 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6009 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6010 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6011 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6012 kpp=\E[5~, rmam=\E[?7l,
6013 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6014 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6015 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6016 smul=\E[4m, xoffc=g, xonc=e,
6018 # (hp2392: copied <rmir> here from hpex -- esr)
6021 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6022 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6023 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6024 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6027 hpsub|hp terminals -- capability subset,
6028 am, da, db, mir, xhp, xon,
6030 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6031 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6032 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6033 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6034 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6035 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6038 # May be used for most 24 x 80 hp terminals,
6039 # but has no padding added, so may allow runover in some terminals at high
6040 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6041 # hp98x5 terminal emulators or hp98x6 consoles.
6042 # Adds xy-cursor addressing, vertical cursor addressing, home,
6043 # last line, and underline capabilities.
6045 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6046 # moved <rmir> here from hpsub -- esr)
6047 hpex|hp extended capabilites,
6048 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6049 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6050 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6052 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6053 hp2|hpex2|hewlett-packard extended capabilities newer version,
6054 am, da, db, mir, xhp,
6055 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6056 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6057 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6058 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6059 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6060 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6061 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6062 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6063 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6064 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6065 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6066 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6067 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6068 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6069 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6070 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6071 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6072 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6075 # From: <ddavis@ic.berkeley.edu>
6076 hp236|hp236 internal terminal emulator,
6079 clear=\EF, cnorm=\EDE, cub1=^H,
6080 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6081 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6082 sgr0=\ECI, smso=\EBI,
6084 # This works on a hp300 console running Utah 4.3 BSD
6085 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6086 hp300h|HP Catseye console,
6087 OTbs, am, da, db, mir, xhp,
6088 cols#128, lines#51, lm#0, xmc#0,
6089 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6090 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6091 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6092 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6093 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6094 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6095 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6097 # From: Greg Couch <gregc@ernie.berkeley.edu>
6098 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6099 OTbs, am, da, db, mir, xhp,
6100 cols#128, it#8, lines#46, lm#0,
6101 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6102 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6103 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6104 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6105 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6106 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6107 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6108 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6109 tbc=\E3, vpa=\E&a%p1%dY,
6110 # HP 9845 desktop computer from BRL
6111 # (hp9845: removed unknown capability :gu: -- esr)
6113 OTbs, am, da, db, eo, mir, xhp,
6115 OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
6116 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
6117 if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
6118 smir=\EQ, smso=\E&dB,
6119 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6120 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6121 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6122 hp98550|hp98550a|HP 9000 Series 300 color console,
6123 OTbs, am, da, db, mir, xhp,
6124 cols#128, it#8, lines#49, lm#0,
6125 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6126 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6127 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6128 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6129 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6130 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6131 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6132 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6133 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6134 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6135 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6136 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6137 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6138 # From: Victor Duchovni <vic@fine.princeton.edu>
6139 # (hp700-wy: removed obsolete ":nl=^J:";
6140 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6141 hp700-wy|HP700/41 emulating wyse30,
6142 OTbs, am, bw, mir, msgr,
6143 cols#80, it#8, lines#24, xmc#1,
6144 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6145 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6146 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6147 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6148 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6149 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6150 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6151 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6152 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6153 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6154 hp70092|hp70092a|hp70092A|HP 700/92,
6156 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6157 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6158 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6159 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6160 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6161 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6162 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6163 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6164 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6165 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6166 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6167 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6168 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6169 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6171 bobcat|sbobcat|HP 9000 model 300 console,
6172 am, da, db, mir, xhp,
6173 cols#128, it#8, lines#47, xmc#0,
6174 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6175 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6176 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6177 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6178 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6179 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6180 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6181 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6182 lines#94, use=gator,
6183 gator|HP 9000 model 237 emulating AAA,
6185 cols#128, it#8, lines#47,
6186 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6187 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6188 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6189 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6190 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6191 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6192 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6193 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6194 gator-52|HP 9000 model 237 emulating VT52,
6195 cols#128, lines#47, use=vt52,
6196 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6197 lines#94, use=gator-52,
6201 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6204 # Honeywell Bull terminal. Its cursor and function keys send single
6205 # control characters and it has standout/underline glitch. Most programs
6206 # do not like these features/bugs. Visual bell is realized by flashing the
6207 # "keyboard locked" LED.
6208 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6210 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6211 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6212 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6213 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6214 dku7003|Honeywell Bull DKU 7003 all features described,
6217 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6218 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6221 #### Lear-Siegler (adm)
6223 # These guys are long since out of the terminals business, but
6224 # in 1995 many current terminals still have an adm type as one of their
6225 # emulations (usually their stupidest, and usually labeled adm3, though
6226 # these `adm3' emulations normally have adm3a+ capabilities).
6228 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6229 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6230 # was being held to ground would trigger a send of the top line on the screen.
6231 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6232 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6233 # for clearing up this point.)
6235 adm1a|adm1|lsi adm1a,
6238 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6239 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6244 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6245 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6246 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6247 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6248 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6252 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6253 # The following ADM-3A switch settings are assumed for normal operation:
6254 # SPACE U/L_DISP CLR_SCRN 24_LINE
6255 # CUR_CTL LC_EN AUTO_NL FDX
6256 # Other switches may be set for operator convenience or communication
6257 # requirements. I recommend
6258 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6260 # Most of these terminals required an option ROM to support lower case display.
6261 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6262 # socket, you may be out of luck.
6264 # (adm3a: some capabilities merged in from BRl entry -- esr)
6268 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6269 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6270 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6274 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6277 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6278 rmso=\EG, smso=\EG, use=adm3a+,
6279 # A lot of terminals other than adm11s use these. Wherever you see
6280 # use=adm+sgr with some of its capabilities disabled, try the
6281 # disabled ones. They may well work but not have been documented or
6282 # expressed in the using entry. We'd like to cook up an <sgr> but the
6283 # <rmacs>/<smacs> sequences of the using entries vary too much.
6284 adm+sgr|adm style highlight capabilities,
6285 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6286 smso=\EG4, smul=\EG8,
6287 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6288 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6289 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
6290 # be ^Z, according to his entry.
6291 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
6292 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
6295 OTkn#8, cols#80, lines#24,
6296 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6297 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6298 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6299 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6300 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6301 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6303 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6304 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6305 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6306 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
6307 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6308 # via BRL. That entry asserted <xmc#1>, but I've left that out because
6309 # neither earlier nor later ADMSs have it -- esr)
6311 # You will need to get into the supervisor setup before you can set
6312 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6313 # see a lot more setup options.
6315 # While in supervisor setup you can also use following codes:
6317 # Ctrl-P Personality character selections (configure for example what
6318 # arrow keys send, if I recall correctly)
6319 # Ctrl-T tabs 1-80 use left&right to move and up to set and
6320 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
6321 # Ctrl-B Binary setup (probably not needed. I think that everything can
6322 # be set using normal setup)
6323 # Ctrl-A Answerback mode (enter answerback message)
6324 # Ctrl-U User friendly mode (normal setup)
6325 # Ctrl-D Defaults entire setup and function keys from EPROM tables
6326 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
6327 # Ctrl-R Reads both setup and functions keys from NVM.
6328 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
6330 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6331 # RTS/CTS used nowadays with virtually every modem and computer. 19200
6332 # bps works fine with hardware flow control.
6334 # The following null-modem cable should fix this and enable you to use
6335 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6336 # set ADM-12+ for DTR handshaking from supervisor setup.
6349 OTbs, OTpt, am, mir,
6350 OTug#1, cols#80, it#8, lines#24,
6351 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6352 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6353 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
6354 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
6355 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6356 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6357 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
6359 # (adm20: removed obsolete ":kn#7:" -- esr)
6360 adm20|lear siegler adm20,
6362 cols#80, it#8, lines#24,
6363 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
6364 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
6365 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
6366 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
6368 adm21|lear siegler adm21,
6370 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
6371 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
6372 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6374 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
6375 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
6376 # removed bogus-looking \200 from before <cup>. -- esr)
6380 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6381 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6382 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
6383 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
6384 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6385 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6386 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
6387 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
6388 # ADM 31 DIP Switches
6390 # This information comes from two versions of the manual for the
6391 # Lear-Siegler ADM 31.
6395 # +-||||-------------------------------------+
6410 # +----------------------------------------------+
6411 # front of case (keyboard)
6413 # S1 - Data Rate - Modem
6414 # S2 - Data Rate - Printer
6415 # ------------------------
6417 # -------------------
6435 # S3 - Interface/Printer/Attributes
6436 # ---------------------------------
6437 # Printer Busy Control
6440 # off off off Busy not active, CD disabled
6441 # off off on Busy not active, CD enabled
6442 # off on off Busy active on J5-20, CD disabled
6443 # on off off Busy active on J5-19, CD disabled - Factory Set.
6444 # on off on Busy active on J5-19, CD enabled
6446 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
6448 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
6450 # sw6 ON enables printer BUSY active LOW - Factory Setting
6451 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
6453 # sw7 ON - steady cursor - Factory Setting
6454 # OFF - blinking cursor
6456 # sw8 ON causes selected attribute character to be displayed
6457 # OFF causes SPACE to be displayed instead - Factory Setting
6463 # sw4 sw1 sw2 sw3 sw4
6464 # ---------------------------
6465 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
6466 # Current Loop disabled - Factory Setting
6467 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
6469 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
6470 # Current Loop Disabled
6472 # sw5 ON disables dot stretching mode - Factory Setting
6473 # OFF enables dot stretching mode
6474 # sw6 ON enables blanking function
6475 # OFF enables underline function - Factory Setting
6476 # sw7 ON causes NULLS to be displayed as NULLS
6477 # OFF causes NULLS to be displayed as SPACES - Factory Setting
6479 # S5 - Word Structure
6480 # -------------------
6481 # sw1 ON enables BREAK key - Factory Setting
6482 # OFF disables BREAK key
6483 # sw2 ON selects 50Hz monitor refresh rate
6484 # OFF selects 60Hz monitor refresh rate - Factory Setting
6486 # Modem Port Selection
6489 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
6490 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
6491 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
6492 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
6493 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
6494 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
6495 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
6496 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
6498 # sw6 ON sends bit 8 a 1 (mark)
6499 # OFF sends bit 8 as 0 (space) - Factory Setting
6500 # sw7 ON selects Block Mode
6501 # OFF selects Conversation Mode - Factory Setting
6502 # sw8 ON selects Full Duplex operation
6503 # OFF selects Half Duplex operation - Factory Setting
6507 # sw1, sw2, sw6, sw7 Reserved - Factory 0
6509 # Printer Port Selection
6510 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
6512 # sw8 ON enables Printer Port
6513 # OFF disables Printer Port - Factory Setting
6515 # S7 - Polling Address
6516 # --------------------
6517 # sw1-7 Establish ASCII character which designates terminal polling address
6519 # OFF = logic 1 - Factory Setting
6520 # sw8 ON enables Polling Option
6521 # OFF disables Polling Option - Factory Setting
6524 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
6526 # This adm31 entry uses underline as the standout mode.
6527 # If the adm31 gives you trouble with standout mode, check the DIP switch in
6528 # position 6, bank @c11, 25% from back end of the circuit board. Should be
6529 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
6530 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
6531 adm31|lsi adm31 with sw6 set for underline mode,
6534 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6535 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6536 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
6537 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6538 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6539 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
6540 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
6541 adm31-old|o31|old adm31,
6542 rmul@, smso=\EG4, smul@, use=adm31,
6543 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
6547 if=/usr/share/tabset/vt100,
6548 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
6550 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
6554 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6555 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6556 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
6557 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
6558 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
6559 smir=\Eq, smul@, use=adm+sgr,
6560 # The following termcap for the Lear Siegler ADM-42 leaves the
6561 # "system line" at the bottom of the screen blank (for those who
6562 # find it distracting otherwise)
6563 adm42-ns|lsi adm-42 with no system line,
6564 cbt=\EI\EF \011, clear=\E;\EF \011,
6565 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
6566 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
6567 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
6568 smir=\Eq\EF \011, use=adm42,
6569 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
6570 # The insert mode of this terminal is commented out because it's broken for our
6571 # purposes in that it will shift the position of every character on the page,
6572 # not just the cursor line!
6573 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
6574 adm1178|1178|lsi adm1178,
6576 cols#80, lines#24, xmc#1,
6577 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
6578 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6579 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
6580 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
6581 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
6582 sgr0=\E), smso=\EG4, smul=\EG1,
6586 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
6587 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
6588 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
6590 # ComputerVision Services
6591 # 500 Old Connecticut Path
6595 # Standout mode is dim reverse-video.
6596 pt100|pt200|wren|fenix|prime pt100/pt200,
6598 cols#80, it#8, lines#24,
6599 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
6600 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
6601 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
6602 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
6603 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
6604 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
6605 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
6606 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
6608 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
6609 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
6610 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
6612 cup=\E[%i%p1%d;%p2%dH, use=pt100,
6614 rmso@, smso@, use=pt100,
6615 pt250w|Prime PT250 in 132-column mode,
6616 rmso@, smso@, use=pt100w,
6621 # 3475-A North 1st Street
6623 # Vox: (800)-457-4447
6624 # Fax: (408)-473-1510
6625 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
6627 # Qume was bought by Wyse, but still (as of early 1995) has its own support
6628 # group and production division.
6630 # Discontinued Qume models:
6632 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
6633 # built to replace them, and a qvt119+ which was a 101+ with available wide
6634 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
6635 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
6636 # ANSI-compatible terminals with the qvt323 and qvt61.
6638 # Current Qume models (as of February 1995):
6640 # All current Qume terminals have ANSI-compatible operation modes.
6641 # Qume is still producing the qvt62, which features emulations for other
6642 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
6643 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
6644 # with many emulations including Wyse370, Wyse 325, etc. Their newest
6645 # model is the qvt520, which is vt420-compatible.
6647 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
6649 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
6650 # setup mode. Shift-s should be a configuration save to NVRAM.
6652 qvt101|qvt108|qume qvt 101 and QVT 108,
6655 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
6656 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
6657 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
6658 # What seems to be going on here is that this entry was designed so that
6659 # the normal highlight is bold and standout is dim plus something else
6660 # (reverse-video maybe? But then, are there two <rev> sequences?)
6661 qvt101+|qvt101p|qume qvt 101 PLUS product,
6663 cols#80, lines#24, xmc#0,
6664 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
6665 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6666 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
6667 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
6668 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
6669 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
6670 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
6671 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
6672 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
6673 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6674 qvt102|qume qvt 102,
6675 cnorm=\E., use=qvt101,
6676 # (qvt103: added <rmam>/<smam> based on init string -- esr)
6677 qvt103|qume qvt 103,
6679 cols#80, it#8, lines#24, vt#3,
6680 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
6681 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
6682 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6683 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
6684 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
6685 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
6686 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6687 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
6688 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
6689 rmso=\E[m$<2>, rmul=\E[m$<2>,
6690 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6691 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
6692 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
6693 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
6694 qvt103-w|qume qvt103 132 cols,
6696 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
6697 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
6699 cols#80, lines#24, xmc#0,
6700 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
6701 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6702 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
6703 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
6704 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
6705 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
6706 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
6707 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6708 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
6709 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6710 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
6711 lines#25, use=qvt119+,
6712 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
6714 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
6715 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
6716 lines#25, use=qvt119+,
6717 qvt203|qvt203+|qume qvt 203 Plus,
6718 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
6719 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
6720 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
6721 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
6722 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
6724 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
6726 # Since a command is present for enabling 25 data lines,
6727 # a specific terminfo entry may be generated for the 203.
6728 # If one is desired for the QVT 119 PLUS then 25 lines must
6729 # be selected in the status line (setup line 9).
6731 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
6733 is2=\E[=40h\E[?3l, use=qvt203,
6734 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
6736 rs2=\E[?3h\E[=40h, use=qvt203,
6738 #### Televideo (tvi)
6741 # 550 East Brokaw Road
6742 # PO Box 49048 95161
6744 # Vox: (408)-954-8333
6745 # Fax: (408)-954-0623
6748 # These require incredible amounts of padding.
6750 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
6751 # Televideo terminals are ANSI and PC-ANSI compatible.
6753 tvi803|televideo 803,
6754 clear=\E*$<10>, use=tvi950,
6756 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
6757 # Switch settings are:
6778 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
6794 # U do CR/LF when CR received
6795 # D do CR when CR received
6817 # S2 6 Cursor down key
6821 # S2 7 Screen colour
6825 # S2 8 DSR status (pin 6)
6829 # S2 9 DCD status (pin 8)
6833 # S2 10 DTR status (pin 20)
6836 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
6837 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
6838 tvi910|televideo model 910,
6840 cols#80, it#8, lines#24, xmc#1,
6841 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6842 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
6843 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
6844 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
6845 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
6846 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6847 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6848 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
6849 # From: Alan R. Rogers <rogers%albany@csnet-relay>
6850 # as subsequently hacked over by someone at SCO
6851 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
6853 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
6856 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
6857 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
6858 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
6859 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
6862 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
6863 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
6864 # D U D D 8O1 D U U U 8E2
6866 # S1 9 Autowrap (U = on, D = off)
6867 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
6868 # S2 1 Mode (U = block, D = conversational)
6869 # S2 2 Duplex (U = half, D = full)
6870 # S2 3 Hertz (U = 50, D = 60)
6871 # S2 4 Edit mode (U = local, D = duplex)
6872 # S2 5 Cursor type (U = underline, D = block)
6873 # S2 6 Cursor down key (U = send ^J, D = send ^V)
6874 # S2 7 Screen colour (U = green on black, D = black on green)
6875 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
6876 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
6877 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
6879 tvi910+|televideo 910+,
6880 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
6881 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
6882 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
6883 ll=\E=7\s, use=tvi910,
6885 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
6886 # <khome> from BRL entry -- esr)
6887 tvi912|tvi914|tvi920|old televideo 912/914/920,
6888 OTbs, OTpt, am, msgr,
6889 cols#80, it#8, lines#24, xmc#1,
6890 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6891 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6892 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
6893 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
6894 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
6895 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
6896 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
6897 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
6899 # We got some new tvi912c terminals that act really weird on the regular
6900 # termcap, so one of our gurus worked this up. Seems that cursor
6901 # addressing is broken.
6902 tvi912cc|tvi912 at cowell college,
6905 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
6906 # From: Benjamin C. W. Sittler
6908 # Someone has put a scanned copy of the manual online at:
6909 # http://vt100.net/televideo/912b-om/
6911 # These terminals were produced ca. 1979, and had a 12" monochrome
6912 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
6913 # ASCII, and were generally similar to adm3a but with attributes
6914 # (including some with magic cookies), fancy half-duplex mode, and
6917 # Some operations reqire truly incredible amounts of padding. The
6918 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
6919 # are so slow as to be nearly unusable.
6921 # There may or may not have been a separate, earlier series of 912/920
6922 # terminals (without the "B" and "C" suffix); I have never seen one,
6923 # and the manual only describes the "B" and "C" series. The 912 and 920
6924 # are quite distinct from the 914 and 924, which were much nicer non-
6925 # magic-cookie terminals similar to the 950.
6927 # This is a new description for the following TeleVideo terminals,
6928 # distinguished chiefly by their keyboards:
6930 # TVI-912B - very odd layout, no function keys (84 keys)
6931 # TVI-920B - typewriter layout, no function keys (103 keys)
6932 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
6933 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
6935 # To choose a setting for the TERM variable, start with the model:
6937 # Model || base name
6938 # ----------||-----------
6939 # TVI-912B || tvi912b
6940 # TVI-912C || tvi912c
6941 # TVI-920B || tvi920b
6942 # TVI-920C || tvi920c
6944 # Then add a suffix from the following table describing installed options
6945 # and how you'd like to use the terminal:
6947 # Use Video | Second | Visual | Magic | Page || feature
6948 # Attributes | Page | Bell | Cookies | Print || suffix
6949 # ------------|--------|--------|---------|-------||---------
6950 # No | No | N/A | N/A | No || -unk
6951 # No | No | N/A | N/A | Yes || -p
6952 # No | Yes | No | N/A | No || -2p-unk
6953 # No | Yes | No | N/A | Yes || -2p-p
6954 # No | Yes | Yes | N/A | No || -vb-unk
6955 # No | Yes | Yes | N/A | Yes || -vb-p
6956 # Yes | No | N/A | No | N/A ||
6957 # Yes | No | N/A | Yes | N/A || -mc
6958 # Yes | Yes | No | No | N/A || -2p
6959 # Yes | Yes | No | Yes | N/A || -2p-mc
6960 # Yes | Yes | Yes | No | N/A || -vb
6961 # Yes | Yes | Yes | Yes | N/A || -vb-mc
6963 # So e.g. a model 920 C with second page memory option, visual bell
6964 # and no magic cookies would be tvi920c-vb; a model 912 B without the
6965 # second page memory option and using magic cookies would be
6970 # At 9600 baud, the terminal is prone to overflow its input buffer
6971 # during complex operations (insert/delete
6972 # character/line/screen/page), and it does not signal this over the
6973 # RS232 cable. The typical symptom of an overrun is that the terminal
6974 # starts beeping, and output becomes garbled.
6976 # The padding delays in this terminfo were derived using tack(1)
6977 # running on a Linux box connected to a TVI-920C with a later-model
6978 # (A49C1-style) ROM running at 9600 baud, so your mileage may
6979 # vary. The numbers below seem to give the terminal enough time so
6980 # that it doesn't overflow its input buffer and start losing
6985 # If you want to use the FUNCT key on a tvi912[bc], use the
6986 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
6987 # the following table (these also work on the 920 series):
6989 # Unshifted Function Keys:
6991 # Key | capname|| Equivalent
6992 # -----|--------||------------
6993 # F1 | <kf1> || FUNCT + @
6994 # F2 | <kf2> || FUNCT + A
6995 # F3 | <kf3> || FUNCT + B
6996 # F4 | <kf4> || FUNCT + C
6997 # F5 | <kf5> || FUNCT + D
6998 # F6 | <kf6> || FUNCT + E
6999 # F7 | <kf7> || FUNCT + F
7000 # F8 | <kf8> || FUNCT + G
7001 # F9 | <kf9> || FUNCT + H
7002 # F10 | <kf10> || FUNCT + I
7003 # F11 | <kf11> || FUNCT + J
7005 # Shifted Function Keys:
7007 # SHIFT + Key | capname|| Equivalent
7008 # -------------|--------||------------
7009 # SHIFT + F1 | <kf12> || FUNCT + `
7010 # SHIFT + F2 | <kf13> || FUNCT + a
7011 # SHIFT + F3 | <kf14> || FUNCT + b
7012 # SHIFT + F4 | <kf15> || FUNCT + c
7013 # SHIFT + F5 | <kf16> || FUNCT + d
7014 # SHIFT + F6 | <kf17> || FUNCT + e
7015 # SHIFT + F7 | <kf18> || FUNCT + f
7016 # SHIFT + F8 | <kf19> || FUNCT + g
7017 # SHIFT + F9 | <kf20> || FUNCT + h
7018 # SHIFT + F10 | <kf21> || FUNCT + i
7019 # SHIFT + F11 | <kf22> || FUNCT + j
7021 # PORTS AND SWITCH SETTINGS
7023 # Here are the switch settings for the TVI-912B/TVI-920B and
7024 # TVI-912C/TVI-920C:
7026 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7027 # 2: 9600 3: 4800 4: 2400 5: 1200
7028 # 6: 600 7: 300 8: 150 9: 75
7031 # S2 UART/Terminal options:
7033 # 1: Not used Not allowed
7034 # 2: Alternate character set Standard character set
7035 # 3: Full duplex Half duplex
7036 # 4: 50 Hz refresh 60 Hz refresh
7037 # 5: No parity Send parity
7038 # 6: 2 stop bits 1 stop bit
7039 # 7: 8 data bits 7 data bits
7040 # 8: Not used Not allowed on Rev E or lower
7041 # 9: Even parity Odd parity
7042 # 10: Steady cursor Blinking cursor
7043 # (On Rev E or lower, use W25 instead of switch 10.)
7045 # S5 UART/Terminal options:
7047 # 1: P3-6 Not connected DSR received on P3-6
7048 # 2: P3-8 Not connected DCD received on P3-8
7050 # 3 Open, 4 Open: P3-20 Not connected
7051 # 3 Open, 4 Closed: DTR on when terminal is on
7052 # 3 Closed, 4 Open: DTR is connected to RTS
7053 # 3 Closed, 4 Closed: Not allowed
7055 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7056 # all data transmitted out of the modem port (P3) will also be
7057 # transmitted out of the printer port (P4).
7059 # 6 Open, 7 Open: Not allowed
7060 # 6 Open, 7 Closed: 20ma current loop input
7061 # 6 Closed, 7 Open: RS232 input
7062 # 6 Closed, 7 Closed: Not allowed
7065 # If the jumper is installed, the effect will occur (the next time the terminal
7068 # S4/W31: Enables automatic LF upon receipt of CR from
7069 # remote or keyboard.
7070 # S4/W32: Enables transmission of EOT at the end of Send. If not
7071 # installed, a carriage return is sent.
7072 # S4/W33: Disables automatic carriage return in column 80.
7073 # S4/W34: Selects Page Print Mode as initial condition. If not
7074 # installed, Extension Mode is selected.
7076 # NON-STANDARD CAPABILITIES
7078 # Sending <u9> or <u7> returns a cursor position report in the format
7079 # YX\r, where Y and X are as in <cup>. This format is described in
7080 # <u8> and <u6>, but it's not clear how one should write an
7081 # appropriate scanf string, since we need to subtract %' ' from the
7082 # character after reading it. The <u9> capability is used by tack(1)
7083 # to synchronize during padding tests, and seems to work for that
7086 # This description also includes the obsolete termcap capabilities
7087 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7089 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7091 # The FUNCT modifier actually works with every normal key by sending
7092 # ^AX\r, where X is the sequence normally sent by that key. This is a
7093 # sort of meta key not currently describable in terminfo.
7095 # There are quite a few other keys (especially on the 920 models,) but
7096 # they are for the most part only useful in block mode.
7098 # These terminals have lots of forms manipulation features, mainly
7099 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7100 # spaces"; nulls are sentinels for "send X" operations); "send X"
7101 # operations for uploading all or part of the screen; and block-mode
7102 # editing keys (they don't send escape sequences, but manipulate video
7103 # memory directly). Block mode is used for local editing, and protect
7104 # mode (in conjunction with the "write protect" attribute,
7105 # a.k.a. half-intensity outside of protect mode) is used to control
7106 # which parts of the screen are edited/sent/printed (by <mc0>).
7108 # There are at least two major families of ROM, "early" and
7109 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7110 # support a few extra escape sequences for manipulating the off-screen
7111 # memory page, and for sending whole pages back to the host (mainly
7112 # useful in block mode.) The descriptions in this file don't use any
7113 # of those sequences: set cursor position including page (\E-PYX,
7114 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7115 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7116 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7117 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7118 # are as in <cup>, and some "send page" features mainly useful for
7119 # forms manipulation.
7121 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7122 # except that a terminal reset (<is2>) enables the keyboard.
7124 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7125 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7129 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7130 # sequences (I infer that in some TeleVideo terminal they may invert
7131 # and uninvert the display) so the <flash> sequence given here is a
7132 # cheesy page-flip instead.
7134 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7135 # tack(1), so it is not included in the descriptions below.
7137 # It's not clear whether auto_left_margin (<bw>) flag should be set
7138 # for these terminals; tack says yes, so it is set here, but this
7139 # differs from other descriptions I've seen.
7141 # Extension print mode (<mc5>) echoes all characters to the printer
7142 # port [in addition to displaying them] except for the page print mode
7143 # sequence (<mc4>); this is a slight violation of the terminfo
7144 # definition for <mc5> but I don't expect it to cause problems. We
7145 # reset to page print mode in <rs1> since it may have been enabled
7148 # The descriptions with plus signs (+) are building blocks.
7150 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7152 cols#80, it#8, lines#24,
7153 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7154 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7155 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7156 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7157 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7158 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7159 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7160 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7161 u7=\E?, u8=%c%c\r, u9=\E?,
7163 # This isn't included in the basic capabilities because it is
7164 # typically unusable in combination with the full range of video
7165 # attributes, since the magic cookie attributes turn into ASCII
7166 # control characters, and the half-intensity ("protected") attribute
7167 # converts all affected characters to spaces.
7169 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7172 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7173 # exposes no other attributes (half-intensity is the only attribute
7174 # that does not generate a magic cookie.)
7176 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7178 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7181 # Full magic-cookie attribute support, with half-intensity reverse
7182 # video for standout. Note that we add a space in the <dim> sequence
7183 # to give a consistent magic-cookie count. Also note that <sgr> uses
7184 # backspacing (in the TVI-supported order) to apply all requested
7185 # attributes with only a single magic cookie.
7187 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7189 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7191 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7192 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7194 # This uses the second page memory option to save & restore screen
7195 # contents. If your terminal is missing the option, this description
7196 # should still work, but that has not been tested.
7198 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7199 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7200 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7202 # This simulates flashing by briefly toggling to the other page
7205 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7206 bel=\EK$<100>\EK, use=tvi912b+2p,
7208 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7210 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7211 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7212 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7213 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7214 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7215 kf8=^AG\r, kf9=^AH\r,
7217 # Combinations of the basic building blocks
7219 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7220 use=tvi912b+2p, use=tvi912b-unk,
7222 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7223 use=tvi912b+vb, use=tvi912b-unk,
7225 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7226 use=tvi912b+printer, use=tvi912b-unk,
7228 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7229 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7231 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7232 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7234 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7235 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7237 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7238 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7240 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7241 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7243 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7244 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7246 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7247 use=tvi912b+dim, use=tvi912b-unk,
7249 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7250 use=tvi912b+mc, use=tvi912b-unk,
7252 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7253 use=tvi920b+fn, use=tvi912b-unk,
7255 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7256 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7258 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7259 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7261 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7262 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7264 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7265 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7268 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7269 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7272 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7273 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7276 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7277 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7280 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7281 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7284 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7285 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7288 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7289 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7291 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7292 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7294 # Televideo 921 and variants
7295 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7296 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7297 # also added empty <acsc> to suppress tic warning -- esr)
7298 tvi921|televideo model 921 with sysline same as page & real vi function,
7299 OTbs, OTpt, am, hs, xenl, xhp,
7300 cols#80, lines#24, xmc#0,
7301 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7302 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7303 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7304 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7305 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7306 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7307 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7308 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7309 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7310 # without the beeper
7311 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7312 # also added empty <acsc> to suppress tic warning -- esr)
7313 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7315 cols#80, lines#24, xmc#0,
7316 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7317 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7318 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7319 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
7320 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7321 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
7322 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
7323 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
7324 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7325 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
7326 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
7327 dl1=\ER$<2*/>, il1=\EE$<2*/>,
7328 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
7329 kil1=\EE$<2*/>, use=tvi92B,
7331 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
7332 # in from a BSD termcap file because it looks like they do something the
7333 # old ones skip -- esr)
7334 tvi924|televideo tvi924,
7335 am, bw, hs, in, mir, msgr, xenl, xon,
7336 cols#80, it#8, lines#24, wsl#80, xmc#0,
7337 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
7338 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
7339 cub1=^H, cud1=^V, cuf1=^L,
7340 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
7341 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
7342 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
7343 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7344 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
7345 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7346 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
7347 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
7348 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
7349 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
7350 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
7351 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
7352 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
7355 # TVI925 DIP switches. In each of these, D = Down and U = Up,
7357 # Here are the settings for the external (baud) switches (S1):
7360 # 7 8 9 10 [Printer]
7361 # 1 2 3 4 [Main RS232]
7362 # -----------------------------------------------------
7381 # Settings for word length and stop-bits (S1)
7383 # Position Description
7385 # ---------------------------
7392 # S2 (external) settings
7394 # Position Up Dn Description
7395 # --------------------------------------------
7397 # X Duplex edit (transmit editing keys)
7398 # --------------------------------------------
7399 # 2 X 912/920 emulation
7401 # --------------------------------------------
7405 # --------------------------------------------
7409 # --------------------------------------------
7413 # --------------------------------------------
7417 # --------------------------------------------
7421 # --------------------------------------------
7422 # 6 X White on black display
7423 # X Black on white display
7424 # --------------------------------------------
7427 # --------------------------------------------
7430 # --------------------------------------------
7433 # --------------------------------------------
7436 # --------------------------------------------
7437 # 10 X CR/LF (Auto LF)
7440 # S3 (internal switch) settings:
7442 # Position Up Dn Description
7443 # --------------------------------------------
7446 # --------------------------------------------
7449 # --------------------------------------------
7452 # --------------------------------------------
7455 # --------------------------------------------
7458 # --------------------------------------------
7459 # 4 X Blinking block cursor
7461 # --------------------------------------------
7462 # 4 X Blinking underline cursor
7464 # --------------------------------------------
7465 # 4 X Steady block cursor
7467 # --------------------------------------------
7468 # 4 X Steady underline cursor
7470 # --------------------------------------------
7471 # 6 X Screen blanking timer (ON)
7472 # X Screen blanking timer (OFF)
7473 # --------------------------------------------
7474 # 7 X Page attributes
7476 # --------------------------------------------
7477 # 8 X DCD disconnected
7479 # --------------------------------------------
7480 # 9 X DSR disconnected
7482 # --------------------------------------------
7483 # 10 X DTR Disconnected
7485 # --------------------------------------------
7487 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
7488 tvi925|televideo 925,
7489 OTbs, am, bw, hs, ul,
7490 cols#80, lines#24, xmc#1,
7491 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
7492 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7493 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
7494 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
7495 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
7496 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
7497 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7498 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7499 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
7500 tsl=\Eh\Ef, use=adm+sgr,
7501 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
7502 # to avoid "magic cookie" standout glitch:
7503 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
7505 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
7507 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
7508 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
7509 # for additional capabilities,
7510 # The following tvi descriptions from B:pjphar and virus!mike
7511 # is for all 950s. It sets the following attributes:
7512 # full duplex (\EDF) write protect off (\E()
7513 # conversation mode (\EC) graphics mode off (\E%)
7514 # white on black (\Ed) auto page flip off (\Ew)
7515 # turn off status line (\Eg) clear status line (\Ef\r)
7516 # normal video (\E0) monitor mode off (\EX or \Eu)
7517 # edit mode (\Er) load blank char to space (\Ee\040)
7518 # line edit mode (\EO) enable buffer control (^O)
7519 # protect mode off (\E\047) duplex edit keys (\El)
7520 # program unshifted send key to send line all (\E016)
7521 # program shifted send key to send line unprotected (\E004)
7522 # set the following to nulls:
7523 # field delimiter (\Ex0\200\200)
7524 # line delimiter (\Ex1\200\200)
7525 # start-protected field delimiter (\Ex2\200\200)
7526 # end-protected field delimiter (\Ex3\200\200)
7527 # set end of text delimiter to carriage return/null (\Ex4\r\200)
7529 # TVI 950 Switch Setting Reference Charts
7533 # S1 1 2 3 4 5 6 7 8 9 10
7534 # +-----------------------+-----+-----+-----------------------+
7535 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
7537 # +------+-----------------------+-----+-----+-----------------------+
7538 # | Up | See | 7 | 2 | See |
7539 # +------+-----------------------+-----+-----+-----------------------+
7540 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
7541 # +------+-----------------------+-----+-----+-----------------------+
7544 # S2 1 2 3 4 5 6 7 8 9 10
7545 # +-----+-----+-----------------+-----+-----------+-----+-----+
7546 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
7547 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7548 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
7549 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7550 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
7551 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7555 # +-----------+-----+-----+-----+-----+-----------+
7556 # | Display | 1 | 2 | 3 | 4 | Baud |
7557 # +-----------+-----+-----+-----+-----+ |
7558 # | Printer | 7 | 8 | 9 | 10 | Rate |
7559 # +-----------+-----+-----+-----+-----+-----------+
7560 # | D | D | D | D | 9600 |
7561 # | U | D | D | D | 50 |
7562 # | D | U | D | D | 75 |
7563 # | U | U | D | D | 110 |
7564 # | D | D | U | D | 135 |
7565 # | U | D | U | D | 150 |
7566 # | D | U | U | D | 300 |
7567 # | U | U | U | D | 600 |
7568 # | D | D | D | U | 1200 |
7569 # | U | D | D | U | 1800 |
7570 # | D | U | D | U | 2400 |
7571 # | U | U | D | U | 3600 |
7572 # | D | D | U | U | 4800 |
7573 # | U | D | U | U | 7200 |
7574 # | D | U | U | U | 9600 |
7575 # | U | U | U | U | 19200 |
7576 # +-----+-----+-----+-----+-----------+
7579 # +-----+-----+-----+-----------+
7580 # | 3 | 4 | 5 | Parity |
7581 # +-----+-----+-----+-----------+
7582 # | X | X | D | None |
7583 # | D | D | U | Odd |
7584 # | D | U | U | Even |
7585 # | U | D | U | Mark |
7586 # | U | U | U | Space |
7587 # +-----+-----+-----+-----------+
7591 # +-----+-----+-----------------+
7592 # | 7 | 8 | Communication |
7593 # +-----+-----+-----------------+
7594 # | D | D | Half Duplex |
7595 # | D | U | Full Duplex |
7598 # +-----+-----+-----------------+
7600 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
7601 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
7602 # should be present and all tvi native modes use the same string for this.
7603 # Finally, note that BSD has cud1=^V. -- esr)
7604 tvi950|televideo 950,
7605 OTbs, am, hs, mir, msgr, xenl, xon,
7606 cols#80, it#8, lines#24, xmc#1,
7607 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
7608 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7609 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7610 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
7611 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
7613 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
7614 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
7615 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
7616 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7617 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7618 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
7619 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
7622 # is for 950 with two pages adds the following:
7623 # set 48 line page (\E\\2)
7624 # place cursor at page 0, line 24, column 1 (\E-07 )
7625 # set local (no send) edit keys (\Ek)
7627 # two page 950 adds the following:
7628 # when entering ex, set 24 line page (\E\\1)
7629 # when exiting ex, reset 48 line page (\E\\2)
7630 # place cursor at 0,24,1 (\E-07 )
7631 # set duplex (send) edit keys (\El) when entering vi
7632 # set local (no send) edit keys (\Ek) when exiting vi
7634 tvi950-2p|televideo950 w/2 pages,
7635 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
7636 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7637 smkx=\El, use=tvi950,
7639 # is for 950 with four pages adds the following:
7640 # set 96 line page (\E\\3)
7641 # place cursor at page 0, line 24, column 1 (\E-07 )
7643 # four page 950 adds the following:
7644 # when entering ex, set 24 line page (\E\\1)
7645 # when exiting ex, reset 96 line page (\E\\3)
7646 # place cursor at 0,24,1 (\E-07 )
7648 tvi950-4p|televideo950 w/4 pages,
7649 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
7650 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7651 smkx=\El, use=tvi950,
7653 # <is2> for reverse video 950 changes the following:
7654 # set reverse video (\Ed)
7656 # set vb accordingly (\Ed ...delay... \Eb)
7658 tvi950-rv|televideo950 rev video,
7659 flash=\Ed$<200/>\Eb,
7660 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
7663 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
7664 tvi950-rv-2p|televideo950 rev video w/2 pages,
7665 flash=\Ed$<200/>\Eb,
7666 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
7667 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7668 smkx=\El, use=tvi950,
7670 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
7671 tvi950-rv-4p|televideo950 rev video w/4 pages,
7672 flash=\Ed$<200/>\Eb,
7673 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
7674 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7675 smkx=\El, use=tvi950,
7676 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
7677 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
7678 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
7679 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
7680 # the :ko: string had :cl: in it, which means that one of the original
7681 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
7682 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
7683 # ko implies -- esr)
7684 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
7686 tvi955|televideo 955,
7689 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
7690 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
7691 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
7692 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
7693 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
7694 rmam=\E[=7l, rmxon=^N,
7695 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
7696 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
7698 tvi955-w|955-w|televideo955 w/132 cols,
7700 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
7701 # use half-intensity as normal mode, full intensity as <bold>
7702 tvi955-hb|955-hb|televideo955 half-bright,
7703 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
7704 sgr0=\EG0\E[=5h, use=tvi955,
7705 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
7706 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
7707 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
7708 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
7709 # it does to the function keys. I deduced <rmam>/<smam>.
7710 # also added empty <acsc> to suppress tic warning, -- esr)
7711 tvi970|televideo 970,
7712 OTbs, OTpt, am, da, db, mir, msgr,
7713 cols#80, it#8, lines#24,
7714 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
7715 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
7716 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
7717 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
7718 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
7719 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
7720 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7721 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
7722 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
7723 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7724 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
7725 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
7726 smul=\E[4m, vpa=\E[%i%p1%dd,
7727 tvi970-vb|televideo 970 with visual bell,
7728 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7730 tvi970-2p|televideo 970 with using 2 pages of memory,
7731 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
7733 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
7734 # per line (rather than 40), Esc K chooses the normal character set. Not sure
7735 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
7736 # <smul> strings are klutzy, but at least use no screen space.
7737 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
7738 # its absence means <smam>=\Ev isn't safe to use. -- esr)
7739 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
7740 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
7741 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
7742 tvipt|televideo personal terminal,
7745 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
7746 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
7747 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
7748 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
7749 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
7750 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
7751 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
7752 tvi9065|televideo 9065,
7753 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
7754 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
7756 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
7757 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
7758 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
7759 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
7760 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
7761 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
7762 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
7763 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7764 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
7765 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
7767 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
7768 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
7769 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7770 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
7771 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7772 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
7773 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
7774 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
7775 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
7776 pfx=\E|%p1%{48}%+%c1%p2%s\031,
7777 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
7778 rep=\E[%p2%db%p1%c, rev=\EG4,
7779 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
7780 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
7781 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
7782 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
7783 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
7784 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
7785 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
7786 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
7787 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
7788 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
7792 # In September 1993, Visual Technology of Westboro, Massachusetts,
7793 # merged with White Pine Software of Nashua, New Hampshire.
7795 # White Pine Software may be contacted at +1 603/886-9050.
7796 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
7799 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
7800 # Recently I hacked together the following termcap for Visual
7801 # Technology's Visual 50 terminal. It's a slight modification of
7803 # It's intended to run when the Visual 50 is in vt52 emulation mode
7804 # (I know what you're thinking; if it's emulating a vt52, then why
7805 # another termcap? Well, it turns out that the Visual 50 can handle
7806 # <dl1> and db(?) among other things, which the vt52 can't)
7807 # The termcap works OK for the most part. The only problem is on
7808 # character inserts. The whole line gets painfully redrawn for each
7809 # character typed. Any suggestions?
7810 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
7811 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
7812 # disguise; <kf7>-<kf9> are really l1-l3.
7814 OTbs, OTpt, am, da, db, msgr,
7815 cols#80, it#8, lines#24,
7816 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
7817 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7818 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
7819 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7820 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
7821 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
7822 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
7823 # this one was BSD & SCO's vi50
7824 vi50adm|visual 50 in adm3a mode,
7826 cols#80, it#8, lines#24,
7827 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7828 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
7829 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
7830 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
7832 # From: Jeff Siegal <jbs@quiotix.com>
7834 OTbs, am, mir, msgr,
7835 cols#80, it#8, lines#24,
7836 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
7837 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7838 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
7839 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
7840 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
7843 # Visual 200 from BRL
7844 # The following switch settings are assumed for normal operation:
7845 # FULL_DUPLEX SCROLL CR
7846 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
7847 # Other switches may be set for operator convenience or communication
7849 # Character insertion is kludged in order to get around the "beep" misfeature.
7850 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
7851 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
7852 # and <dl1> strings, but we seem to get along fine without them.
7854 OTbs, OTpt, am, mir, msgr,
7855 OTkn#10, cols#80, it#8, lines#24,
7856 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
7857 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7858 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
7859 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
7860 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7861 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
7862 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
7863 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
7864 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
7865 rmacs=\EG, rmkx=\E>, rmso=\E3,
7866 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
7867 smkx=\E=, smso=\E4, tbc=\Eg,
7868 # The older Visuals didn't come with function keys. This entry uses
7869 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
7870 # If your version of vi doesn't support function keys you may want
7872 vi200-f|visual 200 no function keys,
7873 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
7874 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
7875 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
7877 vi200-rv|visual 200 reverse video,
7878 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
7880 # the function keys are programmable but we don't reprogram them to their
7881 # default values with <is2> because programming them is very verbose. maybe
7882 # an initialization file should be made for the 300 and they could be stuck
7884 # (vi300: added <rmam>/<smam> based on init string -- esr)
7885 vi300|visual 300 ansi x3.64,
7888 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
7889 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7890 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7892 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
7893 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7894 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
7895 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
7896 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
7897 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
7898 smso=\E[1m, smul=\E[4m,
7899 # some of the vi300s have older firmware that has the command
7900 # sequence for setting editing extent reversed.
7901 vi300-old|visual 300 with old firmware (set edit extent reversed),
7902 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
7905 # Visual 500 prototype entry from University of Wisconsin.
7906 # The best place to look for the escape sequences is page A1-1 of the
7907 # Visual 500 manual. The initialization sequence given here may be
7908 # overkill, but it does leave out some of the initializations which can
7909 # be done with the menus in set-up mode.
7910 # The :xp: line below is so that emacs can understand the padding requirements
7911 # of this slow terminal. :xp: is 10 time the padding factor.
7912 # (vi500: removed unknown :xp#4: termcap;
7913 # also added empty <acsc> to suppress tic warning -- esr)
7916 cols#80, it#8, lines#33,
7917 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
7918 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
7919 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7920 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
7921 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
7923 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
7924 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7925 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
7926 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
7928 # The visual 550 is a visual 300 with tektronix graphics,
7929 # and with 33 lines. clear screen is modified here to
7930 # also clear the graphics.
7931 vi550|visual 550 ansi x3.64,
7933 clear=\030\E[H\E[2J, use=vi300,
7935 vi603|visual603|visual 603,
7937 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
7938 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
7939 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7940 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
7941 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
7942 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
7943 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
7949 # 3471 North First Street
7950 # San Jose, CA 95134
7951 # Vox: (408)-473-1200
7952 # Fax: (408) 473-1222
7953 # Web: http://www.wyse.com
7955 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
7956 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
7957 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
7958 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
7960 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
7961 # They now own the Qume and Amdek brands, too. So these are the people to
7962 # talk with about all Link, Qume, and Amdek terminals.
7964 # These entries include a few small fixes.
7965 # I canceled the bel capacities in the vb entries.
7966 # I made two trivial syntax fixes in the wyse30 entry.
7967 # I made some entries relative to adm+sgr.
7970 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
7972 # Although the Wyse 30 can support more than one attribute
7973 # it requires magic cookies to do so. Many applications do not
7974 # function well with magic cookies. The following terminfo uses
7975 # the protect mode to support one attribute (dim) without cookies.
7976 # If more than one attribute is needed then the wy30-mc terminfo
7979 wy30|wyse30|Wyse 30,
7980 am, bw, hs, mc5i, mir, msgr, xon,
7981 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
7982 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
7983 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
7984 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7985 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
7986 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
7987 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
7988 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
7989 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
7990 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
7991 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7992 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
7993 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
7994 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
7995 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
7996 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
7997 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
7998 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
7999 smso=\E`7\E), tbc=\E0, tsl=\EF,
8001 # This terminal description uses the non-hidden attribute mode
8002 # (with magic cookie).
8004 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8005 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8008 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8009 rmcup=\EG0, rmso=\EG0,
8010 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8011 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8012 smso=\EG4, use=wy30, use=adm+sgr,
8013 # The mandatory pause used by <flash> does not work with
8014 # older versions of terminfo. If you see this effect then
8015 # unset xon and delete the / from the delay.
8016 # i.e. change $<100/> to $<100>
8017 wy30-vb|wyse30-vb|wyse 30 visible bell,
8020 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8021 # Normal) without magic cookies by using the protect mode.
8022 # The following description uses this feature, but when more
8023 # than one attribute is put on the screen at once, all attributes
8024 # will be changed to be the same as the last attribute given.
8025 # The Wyse 50 can support more attributes when used with magic
8026 # cookies. The wy50-mc terminal description uses magic cookies
8027 # to correctly handle multiple attributes on a screen.
8029 wy50|wyse50|Wyse 50,
8030 am, bw, hs, mc5i, mir, msgr, xon,
8031 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8032 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8033 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8034 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8035 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8036 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8037 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8038 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8039 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8040 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8041 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8042 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8043 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8044 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8045 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8046 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8047 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8048 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8049 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8050 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8051 smso=\E`6\E), tbc=\E0, tsl=\EF,
8053 # This terminal description uses the non-hidden attribute mode
8054 # (with magic cookie).
8056 # The mandatory pause used by flash does not work with some
8057 # older versions of terminfo. If you see this effect then
8058 # unset <xon> and delete the / from the delay.
8059 # i.e. change $<100/> to $<100>
8060 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8061 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8064 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8065 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8066 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8067 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8068 smso=\EGt, use=wy50, use=adm+sgr,
8069 wy50-vb|wyse50-vb|wyse 50 visible bell,
8071 wy50-w|wyse50-w|wyse 50 132-column,
8072 cols#132, lw#7, nlab#16, wsl#97,
8073 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8075 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8079 # The Wyse 350 is a Wyse 50 with color.
8080 # Unfortunately this means that it has magic cookies.
8081 # The color attributes are designed to overlap the reverse, dim and
8082 # underline attributes. This is nice for monochrome applications
8083 # because you can make underline stuff green (or any other color)
8084 # but for true color applications it's not so hot because you cannot
8085 # mix color with reverse, dim or underline.
8086 # To further complicate things one of the attributes must be
8087 # black (either the foreground or the background). In reverse video
8088 # the background changes color with black letters. In normal video
8089 # the foreground changes colors on a black background.
8090 # This terminfo uses some of the more advanced features of curses
8091 # to display both color and blink. In the final analysis I am not
8092 # sure that the wy350 runs better with this terminfo than it does
8093 # with the wy50 terminfo (with user adjusted colors).
8095 # The mandatory pause used by flash does not work with
8096 # older versions of terminfo. If you see this effect then
8097 # unset xon and delete the / from the delay.
8098 # i.e. change $<100/> to $<100>
8100 # Bug: The <op> capability resets attributes.
8101 wy350|wyse350|Wyse 350,
8102 am, bw, hs, mc5i, mir, xon,
8103 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8105 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8106 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8107 cub1=^H, cud1=^J, cuf1=^L,
8108 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8109 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8110 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8111 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8112 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8113 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8114 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8115 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8116 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8117 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8118 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8119 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8120 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8121 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8122 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8123 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8124 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8125 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8126 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8127 wy350-vb|wyse350-vb|wyse 350 visible bell,
8129 wy350-w|wyse350-w|wyse 350 132-column,
8130 cols#132, lw#7, nlab#16, wsl#97,
8131 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8133 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8136 # This terminfo description is untested.
8137 # The wyse100 emulates an adm31, so the adm31 entry should work.
8141 cols#80, lines#24, xmc#1,
8142 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8143 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8144 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8145 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8146 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8147 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8148 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8150 # The Wyse 120/150 has most of the features of the Wyse 60.
8151 # This terminal does not need padding up to 9600 baud!
8152 # <msgr> should be set but the clear screen fails when in
8153 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8156 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8157 am, bw, hs, km, mc5i, mir, msgr, xon,
8158 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8159 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8160 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8161 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8162 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8163 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8164 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8165 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8166 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8167 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8168 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8169 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8170 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8171 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8172 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8173 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8174 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8175 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8176 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8177 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8178 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8179 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8181 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8182 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8183 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8184 tbc=\E0, tsl=\EF, use=adm+sgr,
8186 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8187 cols#132, lw#7, nlab#16, wsl#97,
8188 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8189 rs2=\E`;$<70>, use=wy120,
8191 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8192 lh@, lines#25, lw@, nlab@,
8193 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8195 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8196 lh@, lines#25, lw@, nlab@,
8197 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8199 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8202 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8205 # The Wyse 60 is like the Wyse 50 but with more padding.
8206 # The reset strings are slow and the pad times very depending
8207 # on other parameters such as font loading. I have tried
8208 # to follow the following outline:
8210 # <rs1> -> set personality
8211 # <rs2> -> set number of columns
8212 # <rs3> -> set number of lines
8213 # <is1> -> select the proper font
8214 # <is2> -> do the initialization
8215 # <is3> -> set up display memory (2 pages)
8217 # The Wyse 60's that have vt100 emulation are slower than the
8218 # older Wyse 60's. This change happened mid-1987.
8219 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8221 # The meta key is only half right. This terminal will return the
8222 # high order bit set when you hit CTRL-function_key
8224 # It may be useful to assign two function keys with the
8225 # values \E=(\s look at old data in page 1
8226 # \E=W, look at bottom of page 1
8227 # where \s is a space ( ).
8230 # The Wyse 60 runs faster when the XON/XOFF
8231 # handshake is turned off.
8233 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8234 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8235 wy60|wyse60|Wyse 60,
8236 am, bw, hs, km, mc5i, mir, msgr,
8237 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8238 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8239 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8240 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8241 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8242 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8243 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8244 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8245 ip=$<3>, is1=\EcB0\EcC1,
8246 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8247 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8248 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8249 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8250 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8251 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8252 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8253 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8254 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8255 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8256 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8257 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8258 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8259 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8260 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8261 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8262 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8263 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8264 tbc=\E0, tsl=\EF, use=adm+sgr,
8266 wy60-w|wyse60-w|wyse 60 132-column,
8267 cols#132, lw#7, nlab#16, wsl#97,
8268 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8269 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8271 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8272 lh@, lines#25, lw@, nlab@,
8273 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8274 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8275 lh@, lines#25, lw@, nlab@,
8276 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8278 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8280 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8281 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8282 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8283 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8284 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8285 cols#132, lw#7, nlab#16, wsl#97,
8286 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8287 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8288 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8290 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8291 lh@, lines#43, lw@, nlab@,
8292 pln@, rs3=\Ee+$<150>, use=wy60-42,
8293 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8294 lh@, lines#43, lw@, nlab@,
8295 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8297 wy60-vb|wyse60-vb|Wyse 60 visible bell,
8299 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8302 # The Wyse-99GT looks at lot like the Wyse 60 except that it
8303 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
8304 # setup parameter controls the number of lines on the screen.
8305 # For the Wyse 99GT the "lines" setup parameter controls the
8306 # number of lines in a page. The screen can display 25 lines max.
8307 # The Wyse-99GT also has personalities for the VT220 and
8308 # Tektronix 4014. But this has no bearing on the native mode.
8310 # (msgr) should be set but the clear screen fails when in
8311 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8312 # then set msgr, else use msgr@.
8314 # u0 -> enter Tektronix mode
8315 # u1 -> exit Tektronix mode
8317 wy99gt|wyse99gt|Wyse 99gt,
8319 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
8320 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
8321 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
8322 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
8323 u0=\E~>\E8, u1=\E[42h, use=wy60,
8325 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
8326 cols#132, lw#7, nlab#16, wsl#97,
8327 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8328 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
8331 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
8332 lh@, lines#25, lw@, nlab@,
8333 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8335 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
8336 lh@, lines#25, lw@, nlab@,
8337 pln@, rs2=\E`;$<150>, use=wy99gt-w,
8339 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
8342 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
8345 # Can't set tabs! Other bugs (ANSI mode only):
8346 # - can't redefine function keys (anyway, key redefinition in ANSI mode
8347 # is too much complex to be described);
8348 # - meta key can't be described (the terminal forgets it when reset);
8349 # The xon-xoff handshaking can't be disabled while in ansi personality, so
8350 # emacs can't work at speed greater than 9600 baud. No padding is needed at
8352 # dch1 has been commented out because it causes annoying glittering when
8353 # vi deletes one character at the beginning of a line with tabs in it.
8354 # dch makes sysgen(1M) have a horrible behaviour when deleting
8355 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
8356 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
8357 # not, so smir and rmir are commented out as well.
8358 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8359 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
8360 am, km, mc5i, mir, msgr, xenl,
8361 cols#80, it#8, lines#25, vt#3,
8362 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
8363 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8364 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
8365 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
8366 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
8367 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
8368 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8369 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
8370 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
8371 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
8372 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
8373 il1=\E[L, ind=\n$<1>, invis=\E[8m,
8374 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
8375 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8376 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8377 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
8378 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
8379 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
8380 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
8381 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
8382 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8383 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
8384 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
8386 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
8387 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
8388 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8390 # This is the american terminal. Here tabs work fine.
8391 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8392 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
8393 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
8395 # This terminal (firmware version 02) has a lot of bugs:
8397 # - other bugs in ANSI modes (see above).
8398 # This description disables handshaking when using cup. This is because
8399 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
8400 # cannot be used at speeds greater than 9600 baud, because at greater
8401 # speeds handshaking is needed even for character sending. If you use
8402 # DTR handshaking, you can use even greater speeds.
8403 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8404 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
8405 am, bw, hs, km, mc5i, mir, msgr, xon,
8406 cols#80, it#8, lines#25, wsl#46,
8407 acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
8408 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
8409 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
8410 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8411 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
8412 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
8413 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
8415 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
8416 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
8417 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
8418 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
8419 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
8420 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
8421 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8422 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
8423 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
8424 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
8425 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
8426 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
8427 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
8428 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
8430 # This is the american terminal. Here tabs work.
8431 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8432 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
8433 hts=\E1, tbc=\E0, use=wy99f,
8436 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
8437 # The reset strings are slow and the pad times very depending
8438 # on other parameters such as font loading. I have tried
8439 # to follow the following outline:
8441 # <rs1> -> set personality
8442 # <rs2> -> set number of columns
8443 # <rs3> -> set number of lines
8444 # <is1> -> select the proper font
8445 # <is2> -> do the initialization
8446 # <is3> -> set up display memory (2 pages)
8448 # The display memory may be used for either text or graphics.
8449 # When "Display Memory = Shared" the terminal will have more pages
8450 # but garbage may be left on the screen when you switch from
8451 # graphics to text. If "Display Memory = Unshared" then the
8452 # text area will be only one page long.
8454 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
8455 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8456 wy160|wyse160|Wyse 160,
8457 am, bw, hs, km, mc5i, mir, msgr,
8458 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
8459 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8460 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
8461 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8462 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
8463 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
8464 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
8465 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
8466 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8467 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8468 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8469 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8470 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8471 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8472 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8473 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8474 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
8475 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8476 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8477 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
8478 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
8479 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
8480 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
8481 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8482 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8483 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8484 tbc=\E0, tsl=\EF, use=adm+sgr,
8486 wy160-w|wyse160-w|wyse 160 132-column,
8487 cols#132, lw#7, nlab#16, wsl#90,
8488 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
8489 rs2=\EeF$<150>\E`;$<150>, use=wy160,
8491 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
8492 lh@, lines#25, lw@, nlab@,
8493 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
8494 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
8495 lh@, lines#25, lw@, nlab@,
8496 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
8498 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
8500 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
8501 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
8502 rs3=\Ee*$<150>, use=wy160,
8503 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
8504 cols#132, lw#7, nlab#16, wsl#90,
8505 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
8506 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
8508 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
8509 lh@, lines#43, lw@, nlab@,
8510 pln@, rs3=\Ee+$<150>, use=wy160-42,
8511 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
8512 lh@, lines#43, lw@, nlab@,
8513 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
8515 wy160-vb|wyse160-vb|Wyse 160 visible bell,
8517 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
8520 # The Wyse 75 is a vt100 lookalike without advanced video.
8522 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
8523 # Underline) without magic cookies. The following description
8524 # uses this capability, but when more than one attribute is
8525 # put on the screen at once, all attributes will be changed
8526 # to be the same as the last attribute given.
8527 # The Wyse 75 can support more attributes when used with magic
8528 # cookies. The wy75-mc terminal description uses magic cookies
8529 # to correctly handle multiple attributes on a screen.
8531 wy75|wyse75|wyse 75,
8532 am, hs, mc5i, mir, msgr, xenl, xon,
8533 cols#80, lines#24, ma#1, pb#1201, wsl#78,
8534 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8535 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
8536 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
8537 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8538 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8539 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
8540 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
8541 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
8542 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
8543 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
8544 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8545 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8546 ind=\n$<2>, ip=$<1>,
8547 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
8548 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
8549 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
8550 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8551 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8552 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
8553 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
8554 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8555 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
8556 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
8557 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
8558 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
8559 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
8561 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
8562 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8563 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
8564 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
8566 # This terminal description uses the non-hidden attribute mode
8567 # (with magic cookie).
8569 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
8572 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
8573 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
8574 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
8575 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
8577 wy75-vb|wyse75-vb|wyse 75 with visible bell,
8580 wy75-w|wyse75-w|wyse 75 in 132 column mode,
8582 rs2=\E[35h\E[?3h$<80>, use=wy75,
8583 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
8587 # Wyse 85 emulating a vt220 7 bit mode.
8588 # 24 line screen with status line.
8590 # The vt220 mode permits more function keys but it wipes out
8591 # the escape key. I strongly recommend that <f11> be set to
8593 # The terminal may have to be set for 8 data bits and 2 stop
8594 # bits for the arrow keys to work.
8595 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
8596 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
8597 # <dch> leave trash on the screen when used without XON/XOFF.
8599 wy85|wyse85|wyse 85,
8600 am, hs, mc5i, mir, msgr, xenl, xon,
8601 cols#80, it#8, lines#24, wsl#80,
8602 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8603 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8604 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8605 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8606 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8607 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8608 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8609 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8610 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8611 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8612 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8613 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8614 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8615 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8616 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8617 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
8618 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8619 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8620 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
8621 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
8622 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
8623 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8624 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8625 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8626 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8628 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8629 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8630 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8631 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
8633 # Wyse 85 with visual bell.
8634 wy85-vb|wyse85-vb|wyse 85 with visible bell,
8635 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
8637 # Wyse 85 in 132-column mode.
8638 wy85-w|wyse85-w|wyse 85 in 132-column mode,
8640 rs2=\E[35h\E[?3h$<70>, use=wy85,
8642 # Wyse 85 in 132-column mode with visual bell.
8643 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
8646 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
8647 # This copes with an apparent firmware bug in the wy85. He writes:
8648 # "What I did was change leave the terminal cursor keys set to Normal
8649 # (instead of application), and change \E[ to \233 for all the keys in
8650 # terminfo. At one point, I found some reference indicating that this
8651 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
8652 # me), but I can't find that and the server under my bookmark to "Wyse
8653 # Technical" isn't responding. So there's the question of wether the wy85
8654 # terminfo should reflect the manufactuer's intended behaviour of the terminal
8656 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
8657 am, hs, mc5i, mir, msgr, xenl, xon,
8658 cols#80, it#8, lines#24, wsl#80,
8659 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8660 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8661 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8662 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8663 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8664 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8665 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8666 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8667 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8668 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8669 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8670 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8671 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8672 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8673 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
8674 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
8675 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
8676 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
8677 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
8678 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
8679 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
8680 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
8681 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
8682 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8683 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8684 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8685 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8687 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
8688 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8689 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8690 tsl=\E[40h\E7\E[25;%i%p1%dH,
8692 # Wyse 185 emulating a vt320 7 bit mode.
8694 # This terminal always displays 25 lines. These lines may be used
8695 # as 24 data lines and a terminal status line (top or bottom) or
8696 # 25 data lines. The 48 and 50 line modes change the page size
8697 # and not the number of lines on the screen.
8699 # The Compose Character key can be used as a meta key if changed
8702 wy185|wyse185|wyse 185,
8703 am, hs, km, mc5i, mir, msgr, xenl, xon,
8704 cols#80, it#8, lines#24, wsl#80,
8705 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8706 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8707 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8708 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
8709 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8710 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8711 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
8712 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8713 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
8714 el=\E[K, el1=\E[1K, enacs=\E)0,
8715 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
8716 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
8717 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
8718 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
8719 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
8720 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8721 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
8722 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8723 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8724 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
8725 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8726 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
8727 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
8728 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8729 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
8730 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8731 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
8732 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
8733 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8734 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8735 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8736 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
8739 # Wyse 185 with 24 data lines and top status (terminal status)
8740 wy185-24|wyse185-24|wyse 185 with 24 data lines,
8742 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
8745 # Wyse 185 with visual bell.
8746 wy185-vb|wyse185-vb|wyse 185+flash,
8749 # Wyse 185 in 132-column mode.
8750 wy185-w|wyse185-w|wyse 185 in 132-column mode,
8752 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
8753 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
8755 # Wyse 185 in 132-column mode with visual bell.
8756 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
8759 # wy325 terminfo entries
8760 # Done by Joe H. Davis 3-9-92
8762 # lines 25 columns 80
8764 wy325|wyse325|Wyse epc,
8765 am, bw, hs, mc5i, mir,
8766 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8767 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8768 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8769 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8770 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8771 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8772 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8773 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8774 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8775 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8776 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8777 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8778 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8779 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8780 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
8781 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8782 mc0=\EP, mc4=^T, mc5=\Ed#,
8783 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8784 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8785 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8786 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
8787 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8789 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8790 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8791 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
8792 tsl=\EF, use=adm+sgr,
8795 # lines 24 columns 80 vb
8797 wy325-vb|wyse325-vb|wyse-325 with visual bell,
8801 # lines 24 columns 132
8803 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
8804 cols#132, lw#7, nlab#16, wsl#97,
8805 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8806 rs2=\E`;$<70>, use=wy325,
8808 # lines 25 columns 80
8810 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
8811 lh@, lines#25, lw@, nlab@,
8812 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8814 # lines 25 columns 132
8816 wy325-25w|wyse325-25w|wy325 132 columns,
8817 lh@, lines#25, lw@, nlab@,
8818 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8820 # lines 25 columns 132 vb
8822 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
8826 # lines 42 columns 80
8828 wy325-42|wyse325-42|wyse-325 42 lines,
8829 lh@, lines#42, lw@, nlab@,
8830 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8832 # lines 42 columns 132
8834 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
8835 lh@, lines#42, lw@, nlab@,
8836 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8838 # lines 42 columns 132 vb
8840 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
8843 # lines 43 columns 80
8845 wy325-43|wyse325-43|wyse-325 43 lines,
8846 lh@, lines#43, lw@, nlab@,
8849 # lines 43 columns 132
8851 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
8852 lh@, lines#43, lw@, nlab@,
8853 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8855 # lines 43 columns 132 vb
8857 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
8860 # Wyse 370 -- 24 line screen with status line.
8862 # The terminal may have to be set for 8 data bits and 2 stop
8863 # bits for the arrow keys to work.
8865 # If you change keyboards the terminal will send different
8867 # The following definition is for the basic terminal without
8870 # <u0> -> enter Tektronix 4010/4014 mode
8871 # <u1> -> exit Tektronix 4010/4014 mode
8872 # <u2> -> enter ASCII mode (from any ANSI mode)
8873 # <u3> -> exit ASCII mode (goto native ANSI mode)
8874 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
8875 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
8877 # Bug: The <op> capability resets attributes.
8878 wy370-nk|wyse 370 without function keys,
8879 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
8880 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
8881 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8882 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8883 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8884 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8885 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8886 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8887 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
8888 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8889 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
8890 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
8891 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
8892 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
8893 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8895 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
8896 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
8897 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
8898 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
8900 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
8901 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
8902 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
8903 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8904 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
8905 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
8906 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8907 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8908 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8909 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
8910 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
8911 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
8913 # Function key set for the ASCII (wy-50 compatible) keyboard
8914 # This is the default 370.
8916 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
8917 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8918 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
8919 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8920 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
8921 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
8922 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
8923 knp=\E[U, kpp=\E[V, use=wy370-nk,
8925 # Function key set for the VT-320 (and wy85) compatible keyboard
8927 wy370-105k|Wyse 370 with 105 key keyboard,
8928 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8929 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8930 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8931 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
8932 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8933 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
8934 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
8935 use=wy370-nk, use=vt220+keypad,
8937 # Function key set for the PC compatible keyboard
8939 wy370-EPC|Wyse 370 with 102 key keyboard,
8940 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8941 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
8942 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
8943 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8944 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
8946 # Wyse 370 with visual bell.
8947 wy370-vb|Wyse 370 with visible bell,
8950 # Wyse 370 in 132-column mode.
8951 wy370-w|Wyse 370 in 132-column mode,
8953 rs2=\E[35h\E[?3h$<70>, use=wy370,
8955 # Wyse 370 in 132-column mode with visual bell.
8956 wy370-wvb|Wyse 370 with visible bell 132-columns,
8957 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
8958 wy370-rv|Wyse 370 reverse video,
8959 rs3=\E[32h\E[?5h, use=wy370,
8961 # Wyse 99gt Tektronix 4010/4014 emulator,
8963 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
8966 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
8967 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
8969 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
8971 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
8972 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
8974 # Wyse 160 Tektronix 4010/4014 emulator,
8976 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
8977 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
8978 home=^]8`g @\037, use=wy99gt-tek,
8980 # Wyse 370 Tektronix 4010/4014 emulator,
8982 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
8985 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
8986 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
8988 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
8990 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
8991 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
8992 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
8994 # Vendor-supplied Wyse entries end here.
8997 #TITLE: TERMINFO ENTRY WY520
8999 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9000 # BBS with the addition of more function keys and special keys.
9002 # rs1 -> set personality
9003 # rs2 -> set number of columns
9004 # rs3 -> set number of lines
9005 # is1 -> select the proper font
9006 # is2 -> do the initialization
9007 # is3 -> If this string is empty then rs3 gets sent.
9009 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9010 # - The BS key is programmed to generate BS in smcup since
9011 # is2 doesn't seem to work.
9012 # - Remove and shift/Remove: delete a character
9013 # - Insert : enter insert mode
9014 # - Find : delete to end of file
9015 # - Select : clear a line
9016 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9018 # - Bottom status line (host writable line) is used.
9019 # - smkx,rmkx are removed because this would put the numeric
9020 # keypad in Dec application mode which doesn't seem to work
9021 # with SCO applications.
9023 wy520|wyse520|wyse 520,
9024 am, hs, km, mc5i, mir, xenl, xon,
9025 cols#80, it#8, lines#24, wsl#80,
9026 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9027 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9028 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9029 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9030 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9031 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9032 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9033 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9034 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9035 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9036 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9037 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9038 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9039 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9040 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9041 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9042 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9043 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9044 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9045 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9046 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9047 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9048 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9049 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9050 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9051 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9052 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9053 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9054 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9055 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9056 vpa=\E[%i%p1%dd, use=vt220+keypad,
9058 # Wyse 520 with 24 data lines and status (terminal status)
9059 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9061 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9064 # Wyse 520 with visual bell.
9065 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9066 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9068 # Wyse 520 in 132-column mode.
9069 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9071 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9072 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9074 # Wyse 520 in 132-column mode with visual bell.
9075 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9076 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9079 # Wyse 520 emulating a vt420 7 bit mode.
9080 # The DEL key is programmed to generate BS in is2.
9081 # With EPC keyboard.
9082 # - 'End' key will clear till end of line on EPC keyboard
9083 # - Shift/End : ignored.
9084 # - Insert : enter insert mode.
9085 # - Delete : delete a character (have to change interrupt character
9086 # to CTRL-C: stty intr '^c') for it to work since the
9087 # Delete key sends 7FH.
9088 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9089 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9090 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9093 # Wyse 520 with 24 data lines and status (terminal status)
9094 # with EPC keyboard.
9095 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9097 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9100 # Wyse 520 with visual bell.
9101 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9102 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9104 # Wyse 520 in 132-column mode.
9105 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9107 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9108 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9110 # Wyse 520 in 132-column mode with visual bell.
9111 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9112 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9114 # Wyse 520 in 80-column, 36 lines
9115 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9118 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9121 # Wyse 520 in 80-column, 48 lines
9122 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9125 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9128 # Wyse 520 in 132-column, 36 lines
9129 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9132 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9135 # Wyse 520 in 132-column, 48 lines
9136 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9139 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9143 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9144 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9147 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9150 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9151 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9154 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9157 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9158 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9161 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9164 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9165 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9168 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9171 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9172 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9173 # file and we don't know what <hts> is -- esr)
9174 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9176 cols#80, it#8, lines#24,
9177 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9178 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9179 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9180 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9181 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9182 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9185 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9186 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9187 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9188 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9191 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9192 wy100q|Wyse 100 for Quotron,
9194 cols#80, lines#24, xmc#1,
9195 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9196 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9197 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9198 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9199 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9201 #### Kermit terminal emulations
9203 # Obsolete Kermit versions may be listed in the section describing obsolete
9204 # non-ANSI terminal emulators later in the file.
9207 # KERMIT standard all versions.
9208 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9209 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9210 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9211 kermit|standard kermit,
9214 clear=\EE, cub1=^H, cuf1=\EC,
9215 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9216 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9217 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9218 kermit-am|standard kermit plus auto-margin,
9220 is2=K1 Standard Kermit plus Automatic Margins\n,
9223 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9224 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9226 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9227 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9230 clear=\EH\EJ, ed@, el@,
9231 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9233 # Cannot use line 25, now acts funny like ansi special scrolling region.
9234 # Initialization must escape from that region by cursor position to line 24.
9235 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9236 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9237 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9238 pckermit120|UCB IBMPC Kermit 1.20,
9240 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9242 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9243 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9244 # MS-DOS Kermit 2.27 for the IBMPC
9245 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9246 # Cannot use line 25, now acts funny like ansi special scrolling region.
9247 # Initialization must escape from that region by cursor position to line 24.
9248 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9249 # Reverse video for standout like H19.
9250 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9251 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9252 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9254 cols#80, it#8, lines#24,
9255 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9256 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9257 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9258 home=\EH, ht=^I, il1=\EL,
9259 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9260 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9261 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9262 # MS-DOS Kermit 2.27 with automatic margins
9263 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9264 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9266 cvvis=\EO\Eq\EG\EvK5,
9267 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9269 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9270 # Automatic margins now default. Use ansi <sgr> for highlights.
9271 # Define function keys.
9272 # (msk22714: removed obsolete ":kn#10:" -- esr)
9273 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9274 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9276 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9277 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9278 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9279 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9280 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9281 # This was designed for a VT320 emulator, but it is probably a good start
9282 # at support for the VT320 itself.
9283 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9284 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9285 vt320-k3|MS-Kermit 3.00's vt320 emulation,
9286 am, eslok, hs, km, mir, msgr, xenl,
9287 cols#80, it#8, lines#49, pb#9600, vt#3,
9288 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9289 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9290 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9291 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9292 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9293 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9294 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9295 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9296 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9297 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9298 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9299 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9300 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9301 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9302 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9303 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9304 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9305 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9306 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9307 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9308 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9309 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9310 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9311 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
9312 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9313 vt320-k311|dec vt320 series as defined by kermit 3.11,
9314 am, eslok, hs, mir, msgr, xenl, xon,
9315 cols#80, it#8, lines#24, vt#3,
9316 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9317 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9318 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9319 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9320 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9321 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9322 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9323 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
9324 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
9325 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
9326 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
9327 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9328 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9329 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
9330 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
9331 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
9332 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
9333 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
9334 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
9335 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
9337 ######## NON-ANSI TERMINAL EMULATIONS
9342 # These entries attempt to describe Avatar, a terminal emulation used with
9343 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
9344 # capabilities, but with cheaper (shorter) control sequences. Messy design,
9345 # excessively dependent on PC idiosyncracies, but apparently rather popular
9348 # No color support. Avatar doesn't fit either of the Tektronix or HP color
9349 # models that terminfo knows about. An Avatar color attribute is the
9350 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
9352 # I wrote these entries while looking at the Avatar spec. I don't have
9353 # the facilities to test them. Let me know if they work, or don't.
9355 # Avatar escapes not used by these entries (because maybe you're smarter
9356 # and more motivated than I am and can figure out how to wrap terminfo
9357 # around some of them, and because they are weird enough to be funny):
9359 # ^L -- clear window/reset current attribute to default
9360 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
9362 # bit: 6 5 4 3 2 1 0
9364 # +---+---+ | +---+---+
9366 # | | foreground color
9367 # | foreground intensity
9370 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
9371 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
9372 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
9373 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
9374 # (^V^L and ^V^M set the current attribute as a side-effect.)
9375 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
9376 # in the pattern, <c> the number of times the pattern
9377 # should be repeated. If either value is 0, no-op.
9378 # The pattern can contain Avatar console codes,
9379 # including other ^V ^Y patterns.
9381 # ^V^O -- clockwise mode on; turn print direction right each time you
9382 # hit a window edge (yes, really). Turned off by CR
9384 # ^V^Q%c -- query the driver
9385 # ^V^R -- driver reset
9386 # ^V^S -- Sound tone (PC-specific)
9387 # ^V^T -- change highlight at current cursor poition to %c
9388 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
9389 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
9392 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9393 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
9394 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
9395 # which is the only method that will actually work for multiple highlights.)
9397 # Update by TD - 2004: half of this was inconsistent. Found documentation
9398 # and repaired most of the damage. sgr0 is probably incorrect, but the
9399 # available documentation gives no clues for a workable string.
9400 avatar0|avatar terminal emulator level 0,
9402 cols#80, it#8, lines#25,
9403 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
9404 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
9405 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
9407 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
9408 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
9410 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9411 avatar0+|avatar terminal emulator level 0+,
9412 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
9413 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9414 avatar|avatar1|avatar terminal emulator level 1,
9415 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
9416 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
9420 # RBComm is a lean and mean terminal emulator written by the Interrupt List
9421 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
9422 # '90s), especially in the BBS world, and still has some loyal users due to
9423 # its very small memory footprint and to a cute macro language.
9424 rbcomm|IBM PC with RBcomm and EMACS keybindings,
9425 am, bw, mir, msgr, xenl,
9426 cols#80, it#8, lines#25,
9427 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9428 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9429 cub1=^H, cud1=^C, cuf1=^B,
9430 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
9431 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
9432 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
9433 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
9434 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
9435 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
9436 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
9437 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
9438 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
9439 rbcomm-nam|IBM PC with RBcomm without autowrap,
9441 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9442 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
9443 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9444 rbcomm-w|IBM PC with RBcomm in 132 column mode,
9446 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9447 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
9448 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9450 ######## LCD DISPLAYS
9454 # from: Eric Z. Ayers (eric@ale.org)
9456 # Matrix Orbital 20x4 LCD display
9457 # Command Character is 0xFE (decimal 254, octal 376)
9459 # On this device, cursor addressability isn't possible. The LCD expects:
9460 # 0xfe G <col> <row>
9461 # for cup: %p1 == row and %p2 is column
9464 # cup=\376G%p2%c%p1%c
9465 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
9466 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
9468 # Alas, there is no cursor upline capability on this display.
9470 # These entries add some 'sanity stuff' to the clear function. That is, it
9471 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
9472 # and turns off the cursor blinking and stuff like that.
9474 # NOTE: calling 'beep' turns on the backlight (bell)
9475 # NOTE: calling 'flash' turns it on and back off (visual bell)
9477 MtxOrb|Generic Matrix Orbital LCD display,
9478 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
9479 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
9480 flash=\376B\001$<200>\376F, home=\376H,
9481 MtxOrb204|20x4 Matrix Orbital LCD display,
9482 cols#20, lines#4, use=MtxOrb,
9483 MtxOrb162|16x2 Matrix Orbital LCD display,
9484 cols#16, lines#2, use=MtxOrb,
9487 ######## OLDER TERMINAL TYPES
9489 # This section is devoted to older commercial terminal brands that are now
9490 # discontinued, but known to be still in use or represented by emulations.
9493 #### AT&T (att, tty)
9495 # This section also includes Teletype-branded VDTs.
9497 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
9498 # Boundless Technologies); for details, see the header comment on the ADDS
9501 # These are AT&T's official terminfo entries. All-caps aliases have been
9504 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
9505 am, eo, mir, msgr, xon,
9506 cols#80, it#8, lines#24,
9507 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
9508 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9509 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9510 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
9511 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
9512 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9513 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9514 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
9515 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
9516 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
9517 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
9518 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9519 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
9521 att2350|AT&T 2350 Video Information Terminal 80 column mode,
9522 mc0@, mc4@, mc5@, use=att2300,
9524 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
9525 # Seems upward compatible with vt100, plus ins/del line/char.
9526 # On sgr, the protection parameter is ignored.
9527 # No check is made to make sure that only 3 parameters are output.
9528 # standout= reverse + half-intensity = 3 | 5.
9529 # bold= reverse + underline = 2 | 3.
9530 # note that half-bright blinking doesn't look different from normal blinking.
9531 # NOTE:you must program the function keys first, label second!
9532 # (att4410: a BSD entry has been seen with the following capabilities:
9533 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
9534 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
9535 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
9536 am, hs, mir, msgr, xon,
9537 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
9538 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9539 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
9540 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
9541 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
9542 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
9543 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
9544 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
9545 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9546 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
9547 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
9548 ll=\E[24H, nel=^M^J,
9549 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
9550 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9551 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9553 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9554 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9555 tsl=\E7\E[25;%p1%{1}%+%dH,
9557 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
9559 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
9561 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
9563 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
9566 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
9568 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
9570 # 5410 in terms of a vt100
9571 # (v5410: added <rmam>/<smam> based on init string -- esr)
9572 v5410|att5410 in terms of a vt100,
9574 cols#80, it#8, lines#24, vt#3,
9575 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9576 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9577 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9578 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
9579 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
9580 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
9581 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
9582 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9583 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
9584 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
9585 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9587 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
9588 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
9589 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9593 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
9594 # even! the 5420 has three modes: scroll, window or page mode
9595 # this terminfo should work in scroll or window mode, but doesn't
9596 # take advantage of any of the differences between them.
9598 # Has memory below (2 lines!)
9599 # 3 pages of memory (plus some spare)
9600 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
9601 # <hpa>, <hts> would work for these, but these work in both scroll and window
9602 # mode... Unset insert character so insert mode works
9603 # <is1> sets 80 column mode,
9604 # <is2> escape sequence:
9605 # 1) turn off all fonts
9606 # 2) function keys off, keyboard lock off, control display off,
9607 # insert mode off, erasure mode off,
9608 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
9609 # 4) reset origin mode
9610 # 5) set line wraparound
9611 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
9613 # 8) program ENTER to transmit ^J,
9614 # We use \212 to program the ^J because a bare ^J will get translated by
9615 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
9617 # <is3> set screen color to black,
9618 # No representation in terminfo for the delete word key: kdw1=\Ed
9619 # Key capabilities assume the power-up send sequence...
9620 # This <rmcup> is not strictly necessary, but it helps maximize
9621 # memory usefulness: <rmcup=\Ez>,
9622 # Alternate sgr0: <sgr0=\E[m\EW^O>,
9623 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
9624 # smkx programs the SYS PF keys to send a set sequence.
9625 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
9626 # This string causes them to send the strings <kf1>-<kf8>
9627 # when pressed in SYS PF mode.
9628 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
9629 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
9631 lh#2, lm#78, lw#8, nlab#8, wsl#55,
9632 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
9633 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
9634 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
9635 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
9636 flash=\E[?5h$<200>\E[?5l, home=\E[x,
9637 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
9638 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
9639 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
9640 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
9641 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
9642 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
9643 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9644 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9645 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
9646 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
9647 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
9648 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
9649 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
9650 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
9651 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9652 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
9653 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
9654 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9657 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
9658 cols#132, lm#54, wsl#97,
9659 is1=\E[?3h$<100>, use=att4415,
9661 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
9662 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
9664 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
9665 cols#132, lm#54, wsl#97,
9666 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
9669 # Note that this mode permits programming USER PF KEYS and labels
9670 # However, when you program user pf labels you have to reselect
9671 # user pf keys to make them appear!
9672 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
9673 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
9674 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
9675 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
9677 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
9678 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9681 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
9682 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9685 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
9686 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9689 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
9690 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9693 att5420_2|AT&T 5420 model 2 80 cols,
9694 am, db, hs, mir, msgr, xon,
9695 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9696 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9697 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
9698 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9699 cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
9700 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
9701 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
9702 dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
9703 el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9704 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9705 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9707 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9708 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
9709 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
9710 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
9711 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
9712 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9713 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9714 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
9715 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
9716 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
9717 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
9718 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
9719 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9721 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9722 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
9723 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9724 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9725 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
9727 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9730 att4418|att5418|AT&T 5418 80 cols,
9733 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9734 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
9735 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9736 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9737 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
9738 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
9739 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
9740 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
9741 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
9742 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
9743 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
9744 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
9745 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
9746 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
9747 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9748 att4418-w|att5418-w|AT&T 5418 132 cols,
9750 is1=\E[?3h, use=att5418,
9752 att4420|tty4420|teletype 4420,
9753 OTbs, da, db, eo, msgr, ul, xon,
9754 cols#80, lines#24, lm#72,
9755 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
9756 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
9757 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
9758 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
9759 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
9760 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
9761 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
9762 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
9764 # The following is a terminfo entry for the Teletype 4424
9765 # asynchronous keyboard-display terminal. It supports
9766 # the vi editor. The terminal must be set up as follows,
9768 # HIGHLIGHT DEFINITION 3-TONE
9769 # DISPLAY FUNCTION GROUP III
9771 # The second entry below provides limited (a la adm3a)
9772 # operation under GROUP II.
9774 # This must be used with DISPLAY FUNCTION GROUP I or III
9775 # and HIGHLIGHT DEFINITION 3-TONE
9776 # The terminal has either bold or blink, depending on options
9778 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
9779 att4424|tty4424|teletype 4424,
9782 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9783 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
9784 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9785 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
9786 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
9787 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
9788 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
9789 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
9790 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9791 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9792 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
9794 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
9795 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
9798 att4424-1|tty4424-1|teletype 4424 in display function group I,
9799 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
9802 # This entry is not one of AT&T's official ones, it was translated from the
9803 # 4.4BSD termcap file. The highlight strings are different from att4424.
9804 # I have no idea why this is -- older firmware version, maybe?
9805 # The following two lines are the comment originally attached to the entry:
9806 # This entry appears to avoid the top line - I have no idea why.
9807 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
9808 att4424m|tty4424m|teletype 4424M,
9810 cols#80, it#8, lines#23,
9811 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
9812 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
9813 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
9814 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9815 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
9816 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
9817 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9819 # The Teletype 5425 is really version 2 of the Teletype 5420. It
9820 # is quite similar, except for some minor differences. No page
9821 # mode, for example, so all of the <cup> sequences used above have
9822 # to change back to what's being used for the 5410. Many of the
9823 # option settings have changed their numbering as well.
9825 # This has been tested on a preliminary model.
9827 # (att5425: added <rmam>/<smam> based on the init string -- esr)
9828 att5425|tty5425|att4425|AT&T 4425/5425,
9829 am, da, db, hs, mir, msgr, xenl, xon,
9830 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9831 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9832 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9833 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
9834 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9835 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9836 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9837 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9838 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
9839 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
9840 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9841 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9842 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9843 invis=\E[8m, is1=\E<\E[?3l$<100>,
9844 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
9845 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9846 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9847 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
9848 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
9849 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
9850 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
9852 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
9853 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
9854 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
9855 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
9856 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
9857 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9858 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9859 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
9860 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
9861 vpa=\E[%p1%{1}%+%dd,
9863 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
9864 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
9866 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
9867 cols#132, lm#54, wsl#97,
9868 is1=\E[?3h$<100>, use=tty5425,
9870 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
9871 # I also added <rmam>/<smam> -- esr)
9872 att4426|tty4426|teletype 4426S,
9874 cols#80, lines#24, lm#48,
9875 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9876 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
9877 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
9878 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9879 cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
9880 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
9881 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
9882 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
9883 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
9884 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9885 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
9886 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
9887 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
9888 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
9889 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
9890 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
9893 # Terminfo entry for the AT&T 510 A Personal Terminal
9894 # Function keys 9 - 16 are available only after the
9895 # screen labeled (soft keys/action blocks) are labeled. Function key
9896 # 9 corresponds to the leftmost touch target on the screen,
9897 # function key 16 corresponds to the rightmost.
9899 # This entry is based on one done by Ernie Rice at Summit, NJ and
9900 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
9901 att510a|bct510a|AT&T 510A Personal Terminal,
9902 am, mir, msgr, xenl, xon,
9903 cols#80, lh#2, lines#24, lw#7, nlab#8,
9904 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9905 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9906 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
9907 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
9908 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9909 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
9910 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
9911 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
9912 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
9913 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
9914 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
9915 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
9916 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
9917 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
9918 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
9919 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9920 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
9921 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
9922 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
9923 smul=\E[4m, tbc=\E[3g,
9925 # Terminfo entry for the AT&T 510 D Personal Terminal
9926 # Function keys 9 through 16 are accessed by bringing up the
9928 # Function key 9 corresponds to the leftmost touch target on the screen,
9929 # function key 16 corresponds to the rightmost.
9931 # There are problems with soft key labeling. These are due to
9932 # strangenesses in the native terminal that are impossible to
9933 # describe in a terminfo.
9934 att510d|bct510d|AT&T 510D Personal Terminal,
9935 am, da, db, mir, msgr, xenl, xon,
9936 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
9937 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9938 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9939 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
9940 cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
9941 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9942 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
9943 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
9944 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
9945 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9946 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
9947 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
9948 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9949 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
9950 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
9951 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
9952 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
9953 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
9954 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
9955 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
9956 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
9957 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
9958 rs2=\E[5;0|, sc=\E7,
9959 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9960 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
9961 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
9962 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
9964 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
9965 att500|att513|AT&T 513 using page mode,
9966 am, chts, mir, msgr, xenl, xon,
9967 cols#80, lh#2, lines#24, lw#8, nlab#8,
9968 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9969 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9970 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
9971 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9972 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9973 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9974 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
9975 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
9976 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
9977 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9978 indn=\E[%p1%dE, invis=\E[8m,
9979 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
9980 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
9981 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
9982 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
9983 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
9984 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
9985 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
9986 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
9987 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9988 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
9989 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
9990 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
9991 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
9992 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
9993 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
9994 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
9995 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
9996 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
9998 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
9999 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10000 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10001 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10002 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10003 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10004 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10006 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10007 rs2=\E[5;0|, sc=\E7,
10008 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10009 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10010 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10011 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10014 # printer must be set to EMUL ANSI to accept ESC codes
10015 # <cuu1> stops at top margin
10016 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10017 # and alt font ascii,wrap on,tabs cleared
10018 # <is2> disables newline on LF,Emphasized off
10019 # The <u0> capability sets form length
10020 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10022 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10023 orhi#100, orl#12, orvi#72,
10024 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10026 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10027 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10028 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10029 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10031 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10032 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10033 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10034 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10036 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10037 # The following SET-UP modes are assumed for normal operation:
10038 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10039 # Other SET-UP modes may be set for operator convenience or communication
10040 # requirements. This termcap description is for the Resident Terminal Mode.
10041 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10042 # The BRL entry also said: UNSAFE :ll=\E[70H:
10043 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10045 cols#88, it#8, lines#70, vt#3,
10046 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10047 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10048 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10049 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10050 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10051 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10052 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10055 # 5620 terminfo (2.0 or later ROMS with char attributes)
10056 # The following SET-UP modes are assumed for normal operation:
10057 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10058 # Other SET-UP modes may be set for operator convenience or communication
10059 # requirements. This termcap description is for Resident Terminal Mode. No
10060 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10061 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10062 # Be aware that older versions of the dmd have a firmware bug that affects
10063 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10064 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10065 # also has <ll>=\E[70H commented out and marked unsafe.
10066 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10067 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10068 OTbs, am, msgr, npc, xon,
10069 cols#88, it#8, lines#70,
10070 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10071 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10072 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10073 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10074 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10075 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10076 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10077 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10078 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10079 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10080 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10081 lines#24, use=att5620,
10082 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10083 lines#34, use=att5620,
10084 # 5620 layer running the "S" system's downloaded graphics handler:
10085 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10087 cols#80, it#8, lines#72,
10088 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10089 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10090 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10091 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10094 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10096 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10097 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10098 att605|AT&T 605 80 column 102key keyboard,
10100 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10101 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10102 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10103 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10104 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10105 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10106 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10107 il1=\E[L, ind=^J, invis=\E[8m,
10108 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10109 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10110 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10111 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10112 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10113 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10114 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10115 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10116 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10117 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10118 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10119 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10120 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10121 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10122 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10123 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10124 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10125 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10126 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10127 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10128 tsl=\E7\E[25;%i%p1%dx,
10129 att605-pc|ATT 605 in pc term mode,
10130 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10131 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10132 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10133 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10134 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10135 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10136 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10137 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10138 xonc=e, use=att605,
10139 att605-w|AT&T 605-w 132 column 102 key keyboard,
10141 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10143 # (att610: I added <rmam>/<smam> based on the init string. I also
10144 # added <indn> and <rin> because the BSD file says the att615s have them,
10145 # and the 615 is like a 610 with a big keyboard, and most of their other
10146 # smart terminals support the same sequence -- esr)
10147 att610|AT&T 610; 80 column; 98key keyboard,
10148 am, eslok, hs, mir, msgr, xenl, xon,
10149 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10150 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10151 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10152 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10153 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10154 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10155 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10156 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10157 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10158 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10159 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10160 indn=\E[%p1%dS, invis=\E[8m,
10161 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10162 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10163 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10164 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10165 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10166 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10167 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10169 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10170 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10171 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10172 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10173 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10174 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10175 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10176 att610-w|AT&T 610; 132 column; 98key keyboard,
10178 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10181 att610-103k|AT&T 610; 80 column; 103key keyboard,
10182 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10183 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10184 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10185 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10186 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10187 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10188 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10189 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10190 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10191 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10192 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10193 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10194 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10195 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10197 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10199 att615|AT&T 615; 80 column; 98key keyboard,
10200 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10201 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10202 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10203 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10204 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10205 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10206 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10207 att615-w|AT&T 615; 132 column; 98key keyboard,
10208 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10209 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10210 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10211 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10212 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10213 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10214 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10215 att615-103k|AT&T 615; 80 column; 103key keyboard,
10216 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10217 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10218 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10219 # (att620: I added <rmam>/<smam> based on the init string and
10220 # <rin>/<indn> from a BSD termcap -- esr)
10221 att620|AT&T 620; 80 column; 98key keyboard,
10222 am, eslok, hs, mir, msgr, xenl, xon,
10223 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10224 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10225 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10226 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10227 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10228 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10229 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10230 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10231 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10232 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10233 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10234 indn=\E[%p1%dS, invis=\E[8m,
10235 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10236 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10237 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10238 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10239 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10240 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10241 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10242 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10243 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10244 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10245 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10246 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10247 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10248 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10249 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10250 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10251 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10252 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10253 rs2=\Ec\E[?3l, sc=\E7,
10254 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10255 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10256 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10257 tsl=\E7\E[25;%i%p1%dx,
10258 att620-w|AT&T 620; 132 column; 98key keyboard,
10260 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10262 att620-103k|AT&T 620; 80 column; 103key keyboard,
10263 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10264 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10265 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10266 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10267 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10268 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10269 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10270 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10271 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10272 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10273 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10274 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10275 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10276 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10277 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10278 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10280 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10282 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10285 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10286 # The following SETUP modes are assumed for normal operation:
10287 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10288 # Font_Size=Large Non-Layers_Window_Cols=80
10289 # Non-Layers_Window_Rows=60
10290 # Other SETUP modes may be set for operator convenience or communication
10291 # requirements. Some capabilities assume a printer attached to the Aux EIA
10292 # port. This termcap description is for the Fixed Non-Layers Window. No
10293 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10294 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10295 att630|AT&T 630 windowing terminal,
10296 OTbs, am, da, db, mir, msgr, npc, xon,
10297 cols#80, it#8, lines#60, lm#0,
10298 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10299 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10300 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10301 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10302 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10303 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10304 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10305 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10306 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10307 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10308 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10309 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10310 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10311 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10312 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10313 rmul=\E[m, rs2=\Ec, sc=\E7,
10314 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10315 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10316 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10317 lines#24, use=att630,
10319 # This is the att700 entry for 700 native emulation of the AT&T 700
10320 # terminal. Comments are relative to changes from the 605V2 entry and
10321 # att730 on which the entry is based. Comments show the terminfo
10322 # capability name, termcap name, and description.
10324 # Here is what's going onm in the init string:
10325 # ESC [ 50;4| set 700 native mode (really is 605)
10326 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
10327 # ESC [ 53;0| set GenFlow to Xon/Xoff
10328 # ESC [ 8 ;0| set CR on NL
10329 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
10330 # ESC [ ? 4 l jump scroll
10331 # ESC [ ? 5 l/h video: normal (l); reverse (h)
10332 # ESC [ ?13 l Labels on
10333 # ESC [ ?15 l parity check = no
10334 # ESC [ 13 l monitor mode off
10335 # ESC [ 20 l LF on NL (not CRLF on NL)
10336 # ESC [ ? 7 h autowrap on
10337 # ESC [ 12 h local echo off
10338 # ESC ( B GO = ASCII
10339 # ESC ) 0 G1 = Special Char & Line Drawing
10340 # ESC [ ? 31 l Set 7 bit controls
10342 # Note: Most terminals, especially the 600 family use Reverse Video for
10343 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
10344 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
10345 # standout mode with \E[m (all normal attributes). The 730 entry simply
10346 # exits reverse video which would leave other current attributes intact. It
10347 # was assumed the 730 entry to be more correct so rmso has changed. The
10348 # 605V2 has no sequences to turn individual attributes off, thus its setting
10349 # and the rmso/smso settings from the 730.
10351 # Note: For the same reason as above in rmso I changed exit under-score mode
10352 # to specifically turn off underscore, rather than return to all normal
10355 # Note: The following pkey_xmit is taken from the 605V2 which contained the
10356 # capability as pfxl. It was changed here to pfx since pfxl
10357 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
10358 # allows strings to be parameters and label values must be programmed as
10359 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
10360 # and strings to be parameters. The 605V2 pfx entry should be examined later
10361 # in this regard. For reference the 730 pfxl entry is shown here for comparison
10363 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
10364 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
10367 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10370 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10372 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
10376 # modular 10 pin Connector
10377 # Left side Right side
10378 # Pin 1 2 3 4 5 6 7 8 9 10
10380 # Key (notch) at bottom
10392 # The manual is 189 pages and is loaded with details about the escape codes,
10393 # etc..... Available from AT&T CIC 800-432-6600...
10394 # ask for Document number 999-300-660..
10396 att700|AT&T 700 24x80 column display w/102key keyboard,
10397 am, eslok, hs, mir, msgr, xenl, xon,
10398 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10399 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10400 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10401 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10402 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10403 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10404 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10405 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10406 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10407 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
10408 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10409 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
10410 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
10411 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
10412 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10413 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
10414 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
10415 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
10416 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
10417 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
10418 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
10419 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
10420 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10421 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
10422 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10423 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
10424 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10425 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10426 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10427 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10428 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
10429 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
10430 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10431 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
10432 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
10433 tsl=\E7\E[99;%i%p1%dx,
10435 # This entry was modified 3/13/90 by JWE.
10436 # fixes include additions of <enacs>, correcting <rep>, and modification
10437 # of <kHOM>. (See comments below)
10438 # att730 has status line of 80 chars
10439 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
10440 # the <kf25> and up keys are used for shifted system Fkeys
10441 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
10442 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
10443 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
10444 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
10445 # 102, 102+1, or 122 key keyboards
10447 # (att730: I added <rmam>/<smam> based on the init string -- esr)
10448 att730|AT&T 730 windowing terminal,
10449 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
10450 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
10451 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10452 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10453 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10454 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10455 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10456 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10457 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10458 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10459 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10460 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
10461 ind=\ED, invis=\E[8m,
10462 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
10463 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10464 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10465 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10466 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
10467 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
10468 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
10469 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
10470 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
10471 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
10472 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
10473 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
10474 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10475 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
10476 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10477 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
10478 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
10479 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10480 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10481 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
10482 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
10483 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10484 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10485 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
10486 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
10487 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
10488 lines#41, use=att730,
10489 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
10490 lines#24, use=att730,
10491 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
10492 flash=\E[?5l$<200>\E[?5h,
10493 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
10495 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
10496 lines#41, use=att730r,
10497 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
10498 lines#24, use=att730r,
10500 # The following represents the screen layout along with the associated
10501 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
10502 # not appear on the screen but are shown to reference the bezel buttons.
10503 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
10504 # position relative to the screen.
10508 # +----------------------------------------------------------------+
10510 # XXXX | kf0 kf24 | XXXX
10513 # XXXX | kf1 kf23 | XXXX
10516 # XXXX | kf2 kf22 | XXXX
10519 # XXXX | kf3 kf21 | XXXX
10522 # XXXX | kf4 kf20 | XXXX
10525 # XXXX | kf5 kf19 | XXXX
10528 # XXXX | kf6 kf18 | XXXX
10534 # +----------------------------------------------------------------+
10536 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
10538 # Note: XXXX represents the screen buttons
10544 # The character string sent by key 'kf26' may be user programmable
10545 # to send either \E[16s, or \E[26s.
10546 # The character string sent by key 'krfr' may be user programmable
10547 # to send either \E[17s, or \E[27s.
10549 # Depression of the "CMD" key sends \E! (kcmd)
10550 # Depression of the "MAIL" key sends \E[26s (kf26)
10551 # "REDRAW" same as "REFRESH" (krfr)
10553 # "kf" functions adds carriage return to output string if terminal is in
10556 # The following are functions not covered in the table above:
10558 # Set keyboard character (SKC): \EPn1;Pn2w
10559 # Pn1= 0 Back Space key
10561 # Pn2= Program char (hex)
10563 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
10564 # Pn1= Window number (1-39)
10565 # Pn2-Pn5= Y;X;Y;X coordinates
10567 # Screen Selection (SSL): \E[Pnu
10568 # Pn= Window number
10570 # Set Terminal Modes (SM): \E[Pnh
10571 # Pn= 3 Graphics mode
10572 # Pn= > Cursor blink
10573 # Pn= < Enter new line mode
10574 # Pn= = Enter reverse insert/replace mode
10575 # Pn= ? Enter no scroll mode
10577 # Reset Terminal Mode (RM): \E[Pnl
10578 # Pn= 3 Exit graphics mode
10579 # Pn= > Exit cursor blink
10580 # Pn= < Exit new line mode
10581 # Pn= = Exit reverse insert/replace mode
10582 # Pn= ? Exit no scroll mode
10584 # Screen Status Report (SSR): \E[Pnp
10585 # Pn= 0 Request current window number
10586 # Pn= 1 Request current window dimensions
10588 # Device Status Report (DSR): \E[6n Request cursor position
10590 # Call Status Report (CSR): \E[Pnv
10591 # Pn= 0 Call failed
10592 # Pn= 1 Call successful
10594 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
10595 # Pn1= Button number to be loaded
10596 # Pn2= Character count of "string"
10597 # Pn3= Key mode being loaded:
10601 # String= Text string (15 chars max)
10603 # Screen Number Report (SNR): \E[Pnp
10604 # Pn= Screen number
10606 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
10607 # Pn1= Number of rows available in window
10608 # Pn2= Number of columns available in window
10610 # Cursor Position Report (CPR): \E[Pn1;Pn2R
10611 # Pn1= "Y" Position of cursor
10612 # Pn2= "X" Position of cursor
10614 # Request Answer Back (RAB): \E[c
10616 # Answer Back Response (ABR): \E[?;*;30;VSV
10617 # *= 0 No printer available
10618 # *= 2 Printer available
10619 # V= Software version number
10620 # SV= Software sub version number
10621 # (printer-available field not documented in v1)
10623 # Screen Alignment Aid: \En
10625 # Bell (lower pitch): \E[x
10627 # Dial Phone Number: \EPdstring\
10628 # string= Phone number to be dialed
10630 # Set Phone Labels: \EPpstring\
10631 # string= Label for phone buttons
10633 # Set Clock: \EPchour;minute;second\
10635 # Position Clock: \EPsY;X\
10636 # Y= "Y" coordinate
10637 # X= "X" coordinate
10639 # Delete Clock: \Epr\
10641 # Programming The Function Buttons: \EPfPn;string\
10642 # Pn= Button number (00-06, 18-24)
10643 # (kf00-kf06, kf18-kf24)
10644 # string= Text to sent on button depression
10646 # The following in version 2 only:
10648 # Request For Local Directory Data: \EPp12;\
10650 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
10652 # Request for Local Directory Data in print format: \EPp13;\
10654 # Enable 'Prt on Line' mode: \022 (DC2)
10656 # Disable 'Prt on Line' mode: \024 (DC4)
10660 # The following Terminfo entry describes functions which are supported by
10661 # the AT&T 5430/pt505 terminal software version 2 and later.
10662 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
10664 cols#80, it#8, lines#24,
10665 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10666 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
10667 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
10668 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10669 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10670 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10671 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
10672 il=\E[%p1%dL, il1=\E[L, ind=^J,
10673 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
10674 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10675 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
10676 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
10677 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
10678 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
10679 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10680 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
10681 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
10682 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
10684 # The following Terminfo entry describes functions which are supported by
10685 # the AT&T 5430/pt505 terminal software version 1.
10686 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
10688 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
10689 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
10690 lines#22, use=att505,
10692 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
10693 # This cut mark helps make life less painful for people running ncurses tic
10694 # on machines with relatively little RAM. The file can be broken in half here
10695 # cleanly and compiled in sections -- no `use' references cross this cut
10699 #### Ampex (Dialogue)
10701 # Yes, these are the same people who are better-known for making audio- and
10702 # videotape. I'm told they are located in Redwood City, CA.
10705 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
10706 # (ampex80: some capabilities merged in from SCO's entry -- esr)
10707 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
10709 cols#80, it#8, lines#24,
10710 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
10711 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10712 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
10713 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
10714 smso=\Ej, smul=\El, tbc=\E3,
10715 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
10716 ampex175|ampex d175,
10719 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10720 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10721 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
10722 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
10723 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
10724 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
10725 # No backspace key in the main QWERTY cluster. Fortunately, it has a
10726 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
10727 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
10728 # mode), this key can be used as the erase key; I find I like this. Because
10729 # some people and some systems may not, there is another termcap ("ampex175")
10730 # that suppresses this little eccentricity by omitting the relevant capability.
10731 ampex175-b|ampex d175 using left arrow for erase,
10732 kbs=^_, use=ampex175,
10733 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
10734 # (ampex210: removed obsolete ":kn#10:" -- esr)
10735 ampex210|a210|ampex a210,
10736 OTbs, am, hs, xenl,
10737 cols#80, it#8, lines#24, xmc#1,
10738 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
10739 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10740 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
10741 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
10742 if=/usr/share/tabset/std, il1=\EE, invis@,
10743 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
10744 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10745 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10746 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
10747 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
10748 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
10749 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
10750 # and moved the padding to be *after* the caps -- esr)
10751 ampex219|ampex-219|amp219|Ampex with Automargins,
10753 cols#80, it#8, lines#24,
10754 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
10755 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
10756 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
10757 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
10758 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
10759 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
10760 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10761 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
10762 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
10763 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
10764 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
10765 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
10766 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
10767 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
10768 cols#132, lines#24,
10769 bel=^G, cr=^M, cud1=^J, ind=^J,
10770 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
10771 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
10772 ampex232|ampex-232|Ampex Model 232,
10774 cols#80, lines#24, xmc#1,
10775 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
10776 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10777 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
10778 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
10779 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
10780 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
10781 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
10782 kf9=^AI\r, khome=^^, use=adm+sgr,
10783 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
10784 ampex232w|Ampex Model 232 / 132 columns,
10785 cols#132, lines#24,
10786 is2=\E\034Eg\El, use=ampex232,
10788 #### Ann Arbor (aa)
10790 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
10791 # numbers of function keys. At least some used monitors in portrait mode,
10792 # allowing up to 76-character screen heights! They were reachable at:
10794 # Ann Arbor Terminals
10795 # 6175 Jackson Road
10796 # Ann Arbor, MI 48103
10799 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
10800 # can't be found on the Web; I fear they're long dead. R.I.P.
10804 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
10805 # Highly modified 6/22 by Mike O'Brien.
10806 # split out into several for the various screen sizes by dave-yost@rand
10807 # Modifications made 3/82 by Mark Horton
10808 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
10809 # status line moved to top of screen, <flash> removed 5/82
10810 # Some unknown person at SCO then hacked the init strings to make them more
10813 # assumes the following setup:
10814 # A menu: 0000 1010 0001 0000
10815 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10816 # C menu: 56 66 0 0 9600 0110 1100
10817 # D menu: 0110 1001 1 0
10819 # Briefly, the settings are for the following modes:
10820 # (values are for bit set/clear with * indicating our preference
10821 # and the value used to test these termcaps)
10822 # Note that many of these settings are irrelevent to the terminfo
10823 # and are just set to the default mode of the terminal as shipped
10826 # A menu: 0000 1010 0001 0000
10827 # Block/underline cursor*
10828 # blinking/nonblinking cursor*
10829 # key click/no key click*
10830 # bell/no bell at column 72*
10832 # key pad is cursor control*/key pad is numeric
10833 # return and line feed/return for <cr> key *
10834 # repeat after .5 sec*/no repeat
10835 # repeat at 25/15 chars per sec. *
10837 # hold data until pause pressed/process data unless pause pressed*
10838 # slow scroll/no slow scroll*
10839 # Hold in area/don't hold in area*
10840 # functions keys have default*/function keys disabled on powerup
10842 # show/don't show position of cursor during page transmit*
10847 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10848 # Baud rate (9600*)
10850 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
10851 # 1 stop bit*/2 stop bits
10852 # parity error detection off*/on
10854 # keyboard local/on line*
10855 # half/full duplex*
10856 # disable/do not disable keyboard after data transmission*
10858 # transmit entire page/stop transmission at cursor*
10859 # transfer/do not transfer protected characters*
10860 # transmit all characters/transmit only selected characters*
10861 # transmit all selected areas/transmit only 1 selected area*
10863 # transmit/do not transmit line separators to host*
10864 # transmit/do not transmit page tab stops tabs to host*
10865 # transmit/do not transmit column tab stop tabs to host*
10866 # transmit/do not transmit graphics control (underline,inverse..)*
10868 # enable*/disable auto XON/XOFF control
10869 # require/do not require receipt of a DC1 from host after each LF*
10870 # pause key acts as a meta key/pause key is pause*
10878 # XON character (17*)
10879 # XOFF character (19*)
10881 # C menu: 56 66 0 0 9600 0110 1100
10882 # number of lines to print data on (printer) (56*)
10884 # number of lines on a sheet of paper (printer) (66*)
10886 # left margin (printer) (0*)
10888 # number of pad chars on new line to printer (0*)
10890 # printer baud rate (9600*)
10892 # printer parity: 00=odd,01=even*,10=space,11=mark
10893 # printer stop bits: 2*/1
10894 # print/do not print guarded areas*
10896 # new line is: 01=LF,10=CR,11=CRLF*
10900 # D menu: 0110 1001 1 0
10901 # LF is newline/LF is down one line, same column*
10902 # wrap to preceding line if move left from col 1*/don't wrap
10903 # wrap to next line if move right from col 80*/don't wrap
10904 # backspace is/is not destructive*
10906 # display*/ignore DEL character
10907 # display will not/will scroll*
10908 # page/column tab stops*
10909 # erase everything*/erase unprotected only
10911 # editing extent: 0=display,1=line*,2=field,3=area
10916 annarbor4080|aa4080|ann arbor 4080,
10919 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
10920 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
10921 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
10922 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
10924 # Strange Ann Arbor terminal from BRL
10925 aas1901|Ann Arbor K4080 w/S1901 mod,
10928 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
10929 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
10932 # If you're using the GNU termcap library, add
10933 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
10934 # to these capabilities. This is the nonstandard GNU termcap scrolling
10935 # capability, arguments are:
10936 # 1. Total number of lines on the screen.
10937 # 2. Number of lines above desired scroll region.
10938 # 3. Number of lines below (outside of) desired scroll region.
10939 # 4. Total number of lines on the screen, the same as the first parameter.
10940 # The generic Ann Arbor entry is the only one that uses this.
10941 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
10942 OTbs, am, km, mc5i, mir, xon,
10944 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
10945 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
10946 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
10947 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10948 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10949 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10950 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
10951 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
10952 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
10953 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10954 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
10955 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
10956 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
10957 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
10958 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
10959 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
10960 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
10961 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
10962 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
10963 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
10964 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
10966 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
10967 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
10968 vpa=\E[%p1%{1}%+%dd,
10970 aaa+rv|ann arbor ambassador in reverse video,
10971 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
10972 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
10973 rs1=\E[H\E[7m\E[J$<156>,
10974 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
10975 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
10976 # Ambassador with the DEC option, for partial vt100 compatibility.
10977 aaa+dec|ann arbor ambassador in dec vt100 mode,
10978 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
10979 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
10980 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
10982 aaa-18|ann arbor ambassador/18 lines,
10984 is2=\E7\E[60;0;0;18p\E8,
10985 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
10987 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
10988 use=aaa+rv, use=aaa-18,
10989 aaa-20|ann arbor ambassador/20 lines,
10991 is2=\E7\E[60;0;0;20p\E8,
10992 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
10994 aaa-22|ann arbor ambassador/22 lines,
10996 is2=\E7\E[60;0;0;22p\E8,
10997 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
10999 aaa-24|ann arbor ambassador/24 lines,
11001 is2=\E7\E[60;0;0;24p\E8,
11002 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11004 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11005 use=aaa+rv, use=aaa-24,
11006 aaa-26|ann arbor ambassador/26 lines,
11008 is2=\E7\E[60;0;0;26p\E8,
11009 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11010 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11011 aaa-28|ann arbor ambassador/28 lines,
11013 is2=\E7\E[60;0;0;28p\E8,
11014 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11015 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11016 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11019 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11020 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11021 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11022 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11023 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11024 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11025 use=aaa+rv, use=aaa-30-s,
11026 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11027 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11028 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11029 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11030 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11031 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11032 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11034 is2=\E7\E[60;0;0;30p\E8,
11035 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11036 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11037 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11038 use=aaa+rv, use=aaa-30,
11039 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11040 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11042 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11043 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11044 use=aaa+rv, use=aaa-30,
11045 aaa-36|ann arbor ambassador/36 lines,
11047 is2=\E7\E[60;0;0;36p\E8,
11048 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11049 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11050 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11051 use=aaa+rv, use=aaa-36,
11052 aaa-40|ann arbor ambassador/40 lines,
11054 is2=\E7\E[60;0;0;40p\E8,
11055 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11056 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11057 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11058 use=aaa+rv, use=aaa-40,
11059 aaa-48|ann arbor ambassador/48 lines,
11061 is2=\E7\E[60;0;0;48p\E8,
11062 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11063 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11064 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11065 use=aaa+rv, use=aaa-48,
11066 aaa-60-s|ann arbor ambassador/59 lines+status,
11069 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11070 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11071 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11072 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11073 use=aaa+rv, use=aaa-60-s,
11074 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11075 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11076 aaa-60|ann arbor ambassador/60 lines,
11078 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11080 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11081 use=aaa+rv, use=aaa-60,
11082 aaa-db|ann arbor ambassador 30/destructive backspace,
11084 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11086 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11088 flash=\E[>59h$<100>\E[>59l,
11089 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11090 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11091 guru+rv|guru changes for reverse video,
11092 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11093 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11094 use=guru+rv, use=guru-33,
11095 guru+s|guru status line,
11097 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11098 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11099 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11100 guru-nctxt|guru with no saved context,
11101 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11102 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11104 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11105 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11106 guru-24|ann arbor guru 24 lines,
11108 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11110 guru-44|ann arbor guru 44 lines,
11112 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11114 guru-44-s|ann arbor guru/44 lines+status,
11116 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11117 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11118 guru-76|guru with 76 lines by 89 cols,
11120 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11122 guru-76-s|ann arbor guru/76 lines+status,
11124 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11125 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11126 guru-76-lp|guru-lp|guru with page bigger than line printer,
11127 cols#134, lines#76,
11128 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11130 guru-76-w|guru 76 lines by 178 cols,
11131 cols#178, lines#76,
11132 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11134 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11135 cols#178, lines#75,
11136 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11137 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11138 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11139 cols#178, lines#76,
11140 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11142 aaa-rv-unk|ann arbor unknown type,
11143 lh#0, lw#0, nlab#0,
11144 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11145 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11147 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11148 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11150 #### Applied Digital Data Systems (adds)
11152 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11153 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11154 # terminals was merged again. Then AT&T sold the terminal business to
11155 # SunRiver, which later changed its name to Boundless Technologies. The
11156 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11157 # as of early 1995) are at:
11159 # Boundless Technologies
11160 # 100 Marcus Boulevard
11161 # Hauppauge, NY 11788-3762
11162 # Vox: (800)-231-5445
11163 # Fax: (516)-342-7378
11164 # Web: http://boundless.com
11166 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11167 # In 1995 Boundless acquired DEC's terminals business.
11170 # Regent: lowest common denominator, works on all regents.
11171 # (regent: renamed ":bc:" to ":le:" -- esr)
11172 regent|Adds Regent Series,
11175 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11176 home=\EY\s\s, ind=^J, ll=^A,
11177 # Regent 100 has a bug where if computer sends escape when user is holding
11178 # down shift key it gets confused, so we avoid escape.
11179 regent100|Adds Regent 100,
11182 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11183 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11184 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11185 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11186 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11187 regent20|Adds Regent 20,
11188 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11190 regent25|Adds Regent 25,
11191 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11193 regent40|Adds Regent 40,
11195 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11196 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11197 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11198 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11199 smul=\E0`, use=regent25,
11200 regent40+|Adds Regent 40+,
11201 is2=\EB, use=regent40,
11202 regent60|regent200|Adds Regent 60,
11203 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11204 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11206 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11207 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11208 viewpoint|addsviewpoint|adds viewpoint,
11211 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11212 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11213 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11214 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11215 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11216 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11217 # Some viewpoints have bad ROMs that foo up on ^O
11218 screwpoint|adds viewpoint with ^O bug,
11219 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11221 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11222 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11223 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11224 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11225 # invis=01000100 and %c is the logical or of desired attributes.
11226 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11228 # Update by TD - 2004:
11230 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11232 # COMMANDS ASCII CODE
11234 # Address, Absolute ESC,=,row,column
11236 # Aux Port Enable ESC,@
11237 # Aux Port Disable ESC,A
11241 # Cursor forward FF
11244 # Cursor supress ETB
11245 # Cursor enable CAN
11246 # Erase to end of line ESC,T
11247 # Erase to end of page ESC,Y
11250 # Keyboard unlock SO
11251 # Read current cursor position ESC,?
11252 # Set Attribute ESC,0,x (see below for values of x)
11253 # Tag bit reset ESC,(
11254 # Tag bit set ESC,)
11255 # Transparent Print on ESC,3
11256 # Transparent Print off ESC,4
11262 # Half Intensity A 0101
11264 # Half Intensity Blinking C 0103
11265 # Reverse Video P 0120
11266 # Reverse Video Half Intensity Q 0121
11267 # Reverse Video Blinking R 0122
11268 # Reverse Video Half Intensity
11270 # Underlined ` 0140
11271 # Underlined Half Intensity a 0141
11272 # Underlined Blinking b 0142
11273 # Underlined Half Intensity
11275 # Video suppress D 0104
11276 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11278 cols#80, it#8, lines#24,
11279 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11280 cub1=^H, cud1=^J, cuf1=^L,
11281 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
11282 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
11283 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11284 nel=^M^J, rev=\E0P\E), rmso=\E(,
11285 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
11286 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
11287 vp60|viewpoint60|addsvp60|adds viewpoint60,
11290 # adds viewpoint 90 - from cornell
11291 # Note: emacs sends ei occasionally to insure the terminal is out of
11292 # insert mode. This unfortunately puts the viewpoint90 IN insert
11293 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
11294 # - :ei=:im=: must be present in the termcap translation.)
11295 # - <xhp> indicates glitch that attributes stick to location
11296 # - <msgr> means it's safe to move in standout mode
11297 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
11299 # Function key and label capabilities merged in from SCO.
11300 vp90|viewpoint90|adds viewpoint 90,
11301 OTbs, bw, msgr, xhp,
11303 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
11304 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
11305 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
11306 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
11307 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
11308 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11309 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
11310 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
11311 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
11312 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
11313 # Note: if return acts weird on a980, check internal switch #2
11314 # on the top chip on the CONTROL pc board.
11315 adds980|a980|adds consul 980,
11318 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
11319 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
11320 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
11321 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
11322 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
11324 #### C. Itoh Electronics
11326 # As of 1995 these people no longer make terminals (they're still in the
11327 # printer business). Their terminals were all clones of the DEC VT series.
11328 # They're located in Orange County, CA.
11331 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
11332 # the delay times and do an auto tab set rather than the indirect
11333 # file used in vt100.
11334 cit80|cit-80|citoh 80,
11337 clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
11338 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
11339 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11340 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
11341 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
11342 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
11343 cit101|citc|C.itoh fast vt100,
11346 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
11347 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
11348 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
11349 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
11350 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
11351 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11352 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
11353 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
11355 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
11356 # The following termcap entry was created from the Callan cd100 entry. The
11357 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
11358 # full selection of combinations of reverse video, underline, and blink.
11359 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
11360 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
11361 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
11362 cit101e|C. Itoh CIT-101e,
11363 OTbs, OTpt, am, mir, msgr,
11364 cols#80, it#8, lines#24,
11365 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
11366 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
11367 cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
11368 el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
11369 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
11370 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
11371 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
11372 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
11373 smkx=\E=, smso=\E[7m, smul=\E[4m,
11374 # From: David S. Lawyer, June 1997:
11375 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
11376 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
11377 # late 1980's CIT Terminals went out of business.
11378 # There is no need to use the initialization string is=... (by invoking
11379 # tset or setterm etc.) provided that the terminal has been manually set
11380 # up (and the setup saved with ^S) to be compatible with this termcap. To be
11381 # compatible it should be in ANSI mode (not VT52). A set-up that
11382 # works is to set all the manually setable stuff to factory defaults
11383 # by pressing ^D in set-up mode. Then increse the brighness with the
11384 # up-arrow key since the factory default will likely be dim on an old
11385 # terminal. Then change any options you want (provided that they are
11386 # compatible with the termcap). For my terminal I set: Screen
11387 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
11388 # on. I also set up mine for parity (but you may not need it). Then
11389 # save the setup with ^S.
11390 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
11391 cit101e-rv|Citoh CIT-101e (sets reverse video),
11392 am, eo, mir, msgr, xenl, xon,
11393 cols#80, it#8, lines#24,
11394 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11395 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
11396 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11397 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11398 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11399 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11400 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
11401 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11402 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11403 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
11404 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11405 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
11406 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
11407 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
11408 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
11409 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
11410 u7=\E[6n, u8=\E[?6c, u9=\E[c,
11411 cit101e-n|CIT-101e w/o am,
11413 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11415 cit101e-132|CIT-101e with 132 cols,
11417 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
11418 cit101e-n132|CIT-101e with 132 cols w/o am,
11421 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11423 # CIE Terminals CIT-500 from BRL
11424 # The following SET-UP modes are assumed for normal operation:
11425 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
11426 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
11427 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
11428 # Other SET-UP modes may be set for operator convenience or communication
11430 # Hardware tabs are assumed to be set every 8 columns; they can be set up
11431 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
11432 # "stty ixon -ixany" to enable DC3/DC1 flow control!
11433 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
11434 cit500|CIE Terminals CIT-500,
11435 OTbs, OTpt, mir, msgr, xon,
11436 OTkn#10, cols#80, it#8, lines#64, vt#3,
11437 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11438 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11439 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11440 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11441 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11442 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
11443 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
11444 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
11445 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
11446 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
11447 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
11448 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
11449 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
11450 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
11451 rmso=\E[m, rmul=\E[m,
11452 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
11453 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
11454 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11456 # C. Itoh printers begin here
11457 citoh|ci8510|8510|c.itoh 8510a,
11460 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
11461 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
11463 citoh-pica|citoh in pica,
11464 is1=\EN, use=citoh,
11465 citoh-elite|citoh in elite,
11468 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
11470 citoh-comp|citoh in compressed,
11473 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
11475 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
11476 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
11478 is1=\EP, use=citoh,
11479 citoh-6lpi|citoh in 6 lines per inch mode,
11480 is3=\EA, use=citoh,
11481 citoh-8lpi|citoh in 8 lines per inch mode,
11483 is3=\EB, use=citoh,
11485 #### Control Data (cdc)
11488 cdc456|cdc 456 terminal,
11491 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11492 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
11493 el=^V, home=^Y, il1=\EL, ind=^J,
11495 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
11499 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11500 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11501 kcuu1=^W, khome=^Y,
11502 cdc721ll|CDC Vikingll,
11504 cols#132, lines#24,
11505 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11506 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11507 kcuu1=^W, khome=^Y,
11508 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
11512 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11513 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
11514 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
11516 # The following switch/key settings are assumed for normal operation:
11517 # 96 chars SCROLL FULL duplex not BLOCK
11518 # Other switches may be set according to communication requirements.
11519 # Insert/delete-character cannot be used, as the whole display is affected.
11520 # "so" & "se" are commented out until jove handles "sg" correctly.
11523 OTkn#10, cols#80, lines#24,
11524 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11525 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
11526 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
11527 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
11528 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
11529 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
11530 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
11531 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
11532 rs1=\031\030\002\003\017,
11534 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
11536 # Part of the long initialization string defines the "DOWN" key to the left
11537 # of the tab key to send an ESC. The real ESC key is positioned way out
11540 # The termcap won't work in 132 column mode due to the way it it moves the
11541 # cursor. Termcap doesn't have the capability (as far as I could tell) to
11542 # handle the 721 in 132 column mode.
11544 # (cdc721: changed :ri: to :sr: -- esr)
11545 cdc721-esc|Control Data 721,
11546 OTbs, OTpt, am, bw, msgr, xon,
11547 OTkn#10, cols#80, it#8, lines#30,
11548 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
11549 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
11550 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
11551 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
11552 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
11553 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
11554 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
11555 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
11556 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
11557 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
11558 smso=^^D, smul=^\, tbc=^^^RY,
11562 # Getronics is a Dutch electronics company that at one time was called
11563 # `Geveke' and made async terminals; but (according to the company itself!)
11564 # they've lost all their documentation on the command set. The hardware
11565 # documentation suggests the terminals were actually manufactured by a
11566 # Taiwanese electronics company named Cal-Comp. There are known
11567 # to have been at least two models, the 33 and the 50.
11570 # The 50 seems to be a top end vt220 clone, with the addition of a higher
11571 # screen resolution, a larger screen, at least 1 page of memory above and
11572 # below the screen, apparently pages of memory right and left of the screen
11573 # which can be panned, and about 75 function keys (15 function keys x normal,
11574 # shift, control, func A, func B). It also has more setup possibilities than
11575 # the vt220. The monitor case is dated November 1978 and the keyboard case is
11578 # The vt100 emulation works as is. The entry below describes the rather
11579 # non-conformant (but more featureful) ANSI mode.
11581 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
11582 visa50|geveke visa 50 terminal in ansi 80 character mode,
11585 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
11586 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
11587 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11588 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11589 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11590 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
11591 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
11592 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11593 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
11594 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
11595 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
11596 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
11597 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
11598 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
11599 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
11600 lf3=A insert line, lf4=A delete line, lf5=A clear,
11601 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
11602 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
11603 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
11604 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
11605 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
11608 #### Human Designed Systems (Concept)
11610 # Human Designed Systems
11612 # King of Prussia, PA 19406
11613 # Vox: (610)-277-8300
11614 # Fax: (610)-275-5739
11615 # Net: support@hds.com
11617 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
11618 # the character-terminal business now (1995) and making X terminals. In
11619 # particular, the whole `Concept' line described here was discontinued long
11623 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
11624 # Extensive changes to c108 by arpavax:eric Feb 1982
11625 # Some unknown person at SCO then translated it to terminfo.
11627 # There seem to be a number of different versions of the C108 PROMS
11628 # (with bug fixes in its Z-80 program).
11630 # The first one that we had would lock out the keyboard of you
11631 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
11632 # Try that on your C108 and see if it sends a ^S when you type it.
11633 # If so, you have an old version of the PROMs.
11635 # You should configure the C108 to send ^S/^Q before running this.
11636 # It is much faster (at 9600 baud) than the c100 because the delays
11638 # new status line display entries for c108-8p:
11639 # <is3> - init str #3 - setup term for status display -
11640 # set programmer mode, select window 2, define window at last
11641 # line of memory, set bkgnd stat mesg there, select window 0.
11643 # <tsl> - to status line - select window 2, home cursor, erase to
11644 # end-of-window, 1/2 bright on, goto(line#0, col#?)
11646 # <fsl> - from status line - 1/2 bright off, select window 0
11648 # <dsl> - disable status display - set bkgnd status mesg with
11651 # There are probably more function keys that should be added but
11652 # I don't know what they are.
11654 # No delays needed on c108 because of ^S/^Q handshaking
11656 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
11657 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
11658 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
11659 c108-4p|concept108-4p|concept 108 w/4 pages,
11660 OTbs, eslok, hs, xon,
11662 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
11663 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
11664 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
11665 ind=^J, is1=\EK\E!\E F,
11666 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
11667 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
11668 smcup=\EU\Ev 8p\Ep\r\E\025,
11669 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
11670 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
11671 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
11673 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
11674 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
11676 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
11678 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
11679 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
11682 # These have only window relative cursor addressing, not screen
11683 # relative. To get it to work right here, smcup/rmcup (which
11684 # were invented for the concept) lock you into a one page
11685 # window for screen style programs.
11687 # To get out of the one page window, we use a clever trick:
11688 # we set the window size to zero ("\Ev " in rmcup) which the
11689 # terminal recognizes as an error and resets the window to all
11692 # This trick works on c100 but does not on c108, sigh.
11694 # Some tty drivers use cr3 for concept, others use nl3, hence
11695 # the delays on cr and ind below. This padding is only needed at
11696 # 9600 baud and up. One or the other is commented out depending on
11697 # local conventions.
11699 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
11700 # less than 6 but more than 2 will work.
11702 # Note: can't use function keys f7-f10 because they are
11703 # indistinguishable from arrow keys (!), also, del char and
11704 # clear eol use xon/xoff so they probably won't work very well.
11706 # Also note that we don't define insrt/del char/delline/eop/send
11707 # because they don't transmit unless we reset them - I figured
11708 # it was a bad idea to clobber their definitions.
11710 # The <mc5> sequence changes the escape character to ^^ so that
11711 # escapes will be passed through to the printer. Only trouble
11712 # is that ^^ won't be - ^^ was chosen to be unlikely.
11713 # Unfortunately, if you're sending raster bits through to be
11714 # plotted, any character you choose will be likely, so we lose.
11716 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
11717 # cannot be # in is2 because it will hang a c100 with no printer
11719 c100|concept100|concept|c104|c100-4p|hds concept 100,
11720 OTbs, am, eo, mir, ul, xenl,
11721 cols#80, lines#24, pb#9600, vt#8,
11722 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
11723 cub1=^H, cud1=^J, cuf1=\E=,
11724 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
11725 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
11726 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
11727 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
11729 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
11730 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
11731 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
11732 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
11733 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
11734 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
11735 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
11736 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
11737 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
11738 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
11739 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
11740 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
11741 smso=\ED, smul=\EG,
11742 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
11743 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
11744 smso=\EE, use=c100,
11745 oc100|oconcept|c100-1p|old 1 page concept 100,
11749 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
11750 # Lots of notes, originally inline, but ncurses doesn't grok that.
11752 # am: not available in power on mode, but turned on with \E[=107;207h in
11753 # is2=. Also, \E=124l in is2= could have been used to prevent needing
11754 # to specify xenl:, but that would have rendered the last space on the
11755 # last line useless.
11756 # bw: Not available in power on mode, but turned on with \E[=107;207h in
11758 # clear: Could be done with \E[2J alone, except that vi (and probably most
11759 # other programs) assume that this also homes the cursor.
11760 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
11761 # scroll the window, and go back to window 1.
11762 # is2: the string may cause a warning to be issued by tic that it
11763 # found a very long line and that it suspects that a comma is missing
11764 # somewhere. This warning can be ignored (unless it comes up more than
11765 # once). The initialization string contains the following commands:
11767 # [Setup mode items changed from factory defaults:]
11768 # \E)0 set alternate character set to
11770 # ^O set character set to default
11771 # [In case it wasn't]
11772 # \E[m turn off all attributes
11773 # [In case they weren't off]
11774 # \E[=107; cursor wrap and
11775 # 207h character wrap on
11776 # \E[90;3u set Fkey definitions to "transmit"
11778 # \E[92;3u set cursor key definitions to
11779 # "transmit" defaults
11780 # \E[43;1u set shift F13 to transmit...
11782 # \E[44;1u set shift F14 to transmit...
11784 # \E[45;1u set shift F15 to transmit...
11786 # \E[46;1u set shift F16 to transmit...
11788 # \E[200;1u set shift up to transmit...
11790 # \E[201;1u set shift down to transmit...
11792 # \E[202;1u set shift right to transmit...
11794 # \E[203;1u set shift left to transmit...
11796 # \E[204;1u set shift home to transmit...
11798 # \E[212;1u set backtab to transmit...
11800 # \E[213;1u set shift backspace to transmit...
11802 # \E[214;1u set shift del to transmit...
11804 # [Necessary items not mentioned in setup mode:]
11805 # \E[2!w move to window 2
11806 # \E[25;25w define window as line 25 of memory
11807 # \E[!w move to window 1
11808 # \E[2*w show current line of window 2 as
11810 # \E[2+x set meta key to use high bit
11811 # \E[;3+} move underline to bottom of character
11813 # All Fkeys are set to their default transmit definitions with \E[90;3u
11814 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
11815 # setting MUST be redefined or deactivated, because the default is
11816 # contained in almost all of this terminal's Fkey strings! If for some
11817 # reason "quit" cannot be altered, the Fkeys can, but it would be
11818 # necessary to change ^| to ^] in all of these definitions, and add
11819 # \E[2;029!t to is2.
11820 # lines: is set to 24 because this terminal refuses to treat the 25th
11822 # ll: Not available in power on mode, but turned on with \E[=107;207h in
11824 # lm: Pointless, given that this definition locks a single screen of
11825 # memory into view, but what the hey...
11826 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
11827 # other attributes alone), but some programs expect this to turn off
11829 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
11830 # attributes alone), but some programs expect this to turn off
11832 # sgr: Attributes are set on this terminal with the string \E[ followed by
11833 # a list of attribute code numbers (in decimal, separated by
11834 # semicolons), followed by the character m. The attribute code
11837 # 2 for dim (which is ignored in power on mode);
11841 # 8 for not displayable; and
11842 # =99 for protected (except that there are strange side
11843 # effects to protected characters which make them inadvisable).
11844 # The mapping of terminfo parameters to attributes is as follows:
11845 # %p1 (standout) = bold and inverse together;
11846 # %p2 (underline) = underline;
11847 # %p3 (reverse) = inverse;
11848 # %p4 (blink) = blinking;
11849 # %p5 (dim) is ignored;
11850 # %p6 (bold) = bold;
11851 # %p7 (invisible) = not displayable;
11852 # %p8 (protected) is ignored; and
11853 # %p9 (alt char set) = alt char set.
11854 # The code to do this is:
11856 # %?%p1%p6%O IF (standout; bold) OR
11857 # %t;1 THEN OUTPUT ;1
11859 # %?%p2 IF underline
11860 # %t;4 THEN OUTPUT ;4
11863 # %t;5 THEN OUTPUT ;5
11865 # %?%p1%p3%O IF (standout; reverse) OR
11866 # %t;7 THEN OUTPUT ;7
11868 # %?%p7 IF invisible
11869 # %t;8 THEN OUTPUT ;8
11872 # %?%p9 IF altcharset
11873 # %t^N THEN OUTPUT ^N
11874 # %e^O ELSE OUTPUT ^O
11876 # sgr0: Everything is turned off (including alternate character set), since
11877 # there is no way of knowing what it is that the program wants turned
11879 # smul: The "underline" attribute is reconfigurable to an overline or
11880 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
11881 # bottom of the character cell. This was done to allow for more readable
11882 # underlined characters, and to be able to distinguish between an
11883 # underlined space, an underscore, and an underlined underscore.
11884 # xenl: Terminal can be configured to not need this, but this "glitch"
11885 # behavior is actually preferable with autowrap terminals.
11887 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
11888 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
11889 # string modifies the 'O' in kf43 to kf46 to a '$'.
11891 # kcbt was originally ^I but redefined in is2=.
11892 # kHOM was \E[H originally but redefined in is2=, as were a number of
11894 # kDC was originally \177 but redefined in is2=.
11896 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
11897 # tsl: Go to window 2, then do an hpa=.
11899 #------- flash=\E[8;3!}^G\E[3;3!}
11900 #------- flash=\E[?5h$<100>\E[?5l
11901 # There are two ways to flash the screen, both of which have their drawbacks.
11902 # The first is to set the bell mode to video, transmit a bell character, and
11903 # set the bell mode back - but to what? There is no way of knowing what the
11904 # user's old bell setting was before we messed with it. Worse, the command to
11905 # set the bell mode also sets the key click volume, and there is no way to say
11906 # "leave that alone", or to know what it's set to, either.
11907 # The second way to do a flash is to set the screen to inverse video, pad for a
11908 # tenth of a second, and set it back - but like before, there's no way to know
11909 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
11910 # it that way. The point is moot anyway, since vi (and probably other
11911 # programs) assume that by defining flash=, you want the computer to use it
11912 # INSTEAD of bel=, rather than as a secondary type of signal.
11914 #------- cvvis=\E[+{
11915 # The is the power on setting, which is also as visible as the cursor
11917 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
11918 # Windowing is possible, but not defined here because it is also used to
11919 # emulate status line functions. Allowing a program to set a window could
11920 # clobber the status line or render it unusable. There is additional memory,
11921 # but screen scroll functions are destructive and do not make use of it.
11923 #------- dim= Not available in power on mode.
11924 # You have a choice of defining low intensity characters as "half bright" and
11925 # high intensity as "normal", or defining low as "normal" and high as "bold".
11926 # No matter which you choose, only one of either "half bright" or "bold" is
11927 # available at any time, so taking the time to override the default is
11930 #------- prot=\E[=0;99m
11931 # Not defined, because it appears to have some strange side effects.
11932 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
11933 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
11934 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
11935 # Available, but making them available to programs is inadvisable.
11936 # The code to do this is:
11937 # %?%p1%{24}%< IF ((key; 24) <;
11938 # %p1%{30}%> ((key; 30) >;
11939 # %p1%{54}%< (key; 54) <
11942 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
11943 # %t\E[ THEN OUTPUT \E[
11944 # %p1%d OUTPUT (key) as decimal
11945 # [next line applies to pfx only]
11949 # %p2%s OUTPUT (string) as string
11951 # [DEL chosen as delimiter, but could be any character]
11952 # [implied: ELSE do nothing]
11956 # Not defined since anything it might do could be done faster and easier with
11957 # either Meta-Shift-Reset or the main power switch.
11959 #------- smkx=\E[1!z
11960 #------- rmkx=\E[!z
11961 # These sequences apply to the cursor and setup keys only, not to the
11962 # numeric keypad. But it doesn't matter anyway, since making these
11963 # available to programs is inadvisable.
11964 # For the key definitions below, all sequences beginning with \E$ are
11965 # custom and programmed into the terminal via is2. \E$ also has no
11966 # meaning to any other terminal.
11968 #------- cmdch=\E[;%p1%d!t
11969 # Available, but making it available to programs is inadvisable.
11970 #------- smxon=\E[1*q
11971 # Available, but making it available to programs is inadvisable.
11972 # Terminal will send XON/XOFF on buffer overflow.
11973 #------- rmxon=\E[*q
11974 # Available, but making it available to programs is inadvisable.
11975 # Terminal will not notify on buffer overflow.
11976 #------- smm=\E[2+x
11978 # Available, but making them available to programs is inadvisable.
11981 # It's not made clear in the manuals, but based on other ansi/vt type
11982 # terminals, it's a good guess that this terminal is capable of both
11983 # "transparent print" (which doesn't copy data to the screen, and
11984 # therefore needs mc5i: specified to say so) and "auxilliary print"
11985 # (which does duplicate printed data on the screen, in which case mc4=
11986 # and mc5= should use the \E[?4i and \E[?5i strings instead).
11988 hds200|Human Designed Systems HDS200,
11989 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
11990 cols#80, it#8, lines#24, lm#0,
11991 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
11992 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
11993 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
11994 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11995 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11996 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11997 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11998 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
11999 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12000 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12002 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12003 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12004 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12005 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12006 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12007 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12008 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12009 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12010 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12011 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12012 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12013 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12014 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12015 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12016 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12017 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12018 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
12019 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
12020 rmul=\E[m\017, sc=\E7,
12021 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12022 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12023 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12026 # <ht> through <el> included to specify padding needed in raw mode.
12027 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12028 avt-ns|concept avt no status line,
12029 OTbs, am, eo, mir, ul, xenl, xon,
12030 cols#80, it#8, lines#24, lm#192,
12031 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12032 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12033 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12034 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12035 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12036 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12037 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12038 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12039 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12040 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12041 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12042 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12043 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12044 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12045 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12046 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12047 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12048 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12049 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12051 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
12052 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
12053 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
12054 tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
12055 avt-rv-ns|concept avt in reverse video mode/no status line,
12056 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12058 avt-w-ns|concept avt in 132 column mode/no status line,
12059 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12061 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12062 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12063 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12065 # Concept AVT with status line. We get the status line using the
12066 # "Background status line" feature of the terminal. We swipe the
12067 # first line of memory in window 2 for the status line, keeping
12068 # 191 lines of memory and 24 screen lines for regular use.
12069 # The first line is used instead of the last so that this works
12070 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12071 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12073 avt+s|concept avt status line changes,
12076 dsl=\E[0*w, fsl=\E[1;1!w,
12077 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12078 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12079 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12080 avt|avt-s|concept-avt|avt w/80 columns,
12081 use=avt+s, use=avt-ns,
12082 avt-rv|avt-rv-s|avt reverse video w/sl,
12083 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12084 use=avt+s, use=avt-ns,
12085 avt-w|avt-w-s|concept avt 132 cols+status,
12086 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12087 use=avt+s, use=avt-ns,
12088 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12089 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12090 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12092 #### Contel Business Systems.
12095 # Contel c300 and c320 terminals.
12096 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12098 cols#80, lines#24, xmc#1,
12099 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12100 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12101 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12102 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12103 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12104 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12105 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12106 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12107 # Contel c301 and c321 terminals.
12108 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12109 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12112 #### Data General (dg)
12114 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12115 # the terminals group at Data General was shut down in 1991; all these
12116 # terminals have thus been discontinued.
12118 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12119 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12120 # sequentially, first the unmodified key codes are listed as F1 through F15.
12121 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12122 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12123 # F46 through F60. This is done in the private "includes" below whose names
12124 # start with "dgkeys+".
12126 # DG terminals generally support 8 bit characters. For each of these terminals
12127 # two descriptions are supplied:
12128 # 1) A default description for 8 bits/character communications, which
12129 # uses the default DG international character set and keyboard codes.
12130 # 2) A description with suffix "-7b" for 7 bits/character communications.
12131 # This description must use the NON-DEFAULT native keyboard language.
12133 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12134 # Ctrl/Shift fdkeys (kf34-kf44).
12136 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12137 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12138 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12139 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12140 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12141 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12142 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12143 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12144 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12145 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12146 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12147 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12148 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12149 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12150 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12151 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12152 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12153 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12154 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12155 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12156 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12157 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12158 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12159 khome=\233H, kprt=\233i,
12161 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12162 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12163 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12164 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12165 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12166 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12167 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12168 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12169 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12170 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12171 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12172 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12173 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12174 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12175 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12176 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12177 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12178 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12179 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12181 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12182 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12183 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12184 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12185 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12186 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12187 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12188 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12189 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12190 kf8=^^x, kf9=^^y, khome=^H,
12192 dgkeys+15|Private entry describing 15 DG mode special keys,
12193 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12194 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12195 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12196 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12197 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12198 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12199 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12200 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12201 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12202 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12203 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12206 # Data General color terminals use the "Tektronix" color model. The total
12207 # number of colors varies with the terminal model, as does support for
12208 # attributes used in conjunction with color.
12210 # Removed u7, u8 definitions since they conflict with tack:
12211 # Preserve user-defined colors in at least some cases.
12213 # Default is ACM mode.
12214 # u8=^^F}20^^Fi^^F}21,
12216 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12218 colors#16, ncv#53, pairs#256,
12220 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12221 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12222 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12224 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12227 # Video attributes are coordinated using static variables set by "sgr", then
12228 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12229 # (D=dim, U=underline, B=blink, R=reverse.)
12230 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12232 colors#8, ncv#16, pairs#64,
12233 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12234 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12235 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12236 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12237 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12239 dg+color|Color info for Data General D470C terminals in ANSI mode,
12240 colors#16, ncv#53, pairs#256,
12241 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12242 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12243 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12244 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12247 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12249 colors#8, ncv#16, pairs#64,
12251 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12252 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12253 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12255 dgmode+color|Color info for Data General D470C terminals in DG mode,
12256 colors#16, pairs#256,
12257 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12258 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12261 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12263 colors#52, ncv#53, pairs#26,
12264 initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
12265 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12266 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12267 scp=\036RG2%p1%02X,
12269 # Colors are in the order: normal, reverse, dim, dim + reverse.
12270 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12272 colors#52, ncv#53, pairs#26,
12273 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12274 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12275 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12276 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12278 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12279 # Initialization string 1 sets:
12280 # ^R - vertical scrolling enabled
12281 # ^C - blinking enabled
12282 dg-generic|Generic Data General terminal in DG mode,
12285 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12286 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
12287 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
12288 smul=^T, use=dgkeys+11,
12290 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
12291 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
12292 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
12293 # maybe they were originally nuls (which would fit).
12295 dg200|data general dasher 200,
12298 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12299 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
12300 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
12301 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
12302 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
12305 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
12306 dg210|dg-ansi|Data General 210/211,
12309 OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
12310 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
12311 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12312 nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
12314 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
12315 # courtesy of Carlos Rucalde of Vantage Software, Inc.
12316 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
12317 # I suspect the d200 function keys actually work on the dg211, check it out.)
12318 dg211|Data General d211,
12319 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
12320 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
12321 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
12323 # dg450 from Cornell (not official)
12324 dg450|dg6134|data general 6134,
12325 cub1@, cuf1=^X, use=dg200,
12328 # Note: lesser Dasher terminals will not work with vi because vi insists upon
12329 # having a command to move straight down from any position on the bottom line
12330 # and scroll the screen up, or a direct vertical scroll command. The 460 and
12331 # above have both, the D210/211, for instance, has neither. We must use ANSI
12332 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
12333 # backspace on all terminals. This is not so in DG mode.
12334 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
12335 # grounds that there is no matching ":ml:"
12336 # fixed garbled ":k9=\E[00\:z:" capability -- esr)
12337 dg460-ansi|Data General Dasher 460 in ANSI-mode,
12338 OTbs, am, msgr, ul,
12339 cols#80, it#8, lines#24,
12340 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
12341 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
12342 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12343 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
12344 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12345 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
12346 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
12347 kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
12348 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
12349 ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
12351 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
12352 # Data General 605x
12353 # Ought to work for a Model 6242, Type D210 as well as a 605x.
12354 # Note that the cursor-down key transmits ^Z. Job control users, beware!
12355 # This also matches a posted description of something called a `Dasher 100'
12356 # so there's a dg100 alias here.
12357 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
12358 dg6053-old|dg100|data general 6053,
12361 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
12362 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
12363 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
12364 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
12365 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
12366 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
12369 # (Some performance can be gained over the generic DG terminal type)
12370 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
12372 home=^P\0\0, ll=^P\0^W, use=dg-generic,
12374 # Like 6053, but adds reverse video and more keypad and function keys.
12375 d200|d200-dg|Data General DASHER D200,
12376 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
12377 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
12378 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
12381 # DASHER D210 series terminals in ANSI mode.
12382 # Reverse video, no insert/delete character/line, 7 bits/character only.
12384 # Initialization string 1 sets:
12385 # <0 - scrolling enabled
12386 # <1 - blink enabled
12387 # <4 - print characters regardless of attributes
12388 d210|d214|Data General DASHER D210 series,
12391 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
12392 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12393 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12394 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
12395 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
12396 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12397 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
12398 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
12400 # DASHER D210 series terminals in DG mode.
12401 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
12402 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
12404 ed=^^FF, use=d200-dg,
12406 # DASHER D211 series terminals in ANSI mode.
12407 # Like the D210, but with 8-bit characters and local printer support.
12409 # Initialization string 2 sets:
12411 # 2;1 - 8 bit operations
12412 # 1;1 - 8 bit (international) keyboard language
12413 # \E(B - default primary character set (U.S. ASCII)
12414 # \E)4 - default secondary character set (international)
12415 # ^O - primary character set
12417 d211|d215|Data General DASHER D211 series,
12419 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
12422 # Initialization string 2 sets:
12424 # 2;0 - 7 bit operations
12425 # 1;0 - 7 bit (native) keyboard language
12426 # \E(0 - default character set (the keyboard native language)
12427 # ^O - primary character set
12428 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
12430 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
12432 # Like the D210 series, but adds support for 8-bit characters.
12434 # Reset string 2 sets:
12435 # ^^N - secondary character set
12436 # ^^FS0> - 8 bit international character set
12437 # ^^O - primary character set
12438 # ^^FS00 - default character set (matching the native keyboard language)
12440 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
12442 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
12444 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
12447 # Enhanced DG mode with changes to be more UNIX compatible.
12448 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
12451 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
12452 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
12453 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
12454 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
12455 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
12456 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
12457 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
12458 rs2=\036N\036FS0E\036O\036FS00,
12459 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12460 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
12461 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
12462 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
12464 is3=\036Fz2, use=d216+,
12466 d217-unix|Data General DASHER D217 in DG-UNIX mode,
12468 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
12471 # DASHER D220 color terminal in ANSI mode.
12472 # Like the D470C but with fewer colors and screen editing features.
12474 # Initialization string 1 sets:
12476 # <0 - scrolling enabled
12477 # <1 - blink enabled
12478 # <4 - print characters regardless of attributes
12479 # \E[m - all attributes off
12480 # Reset string 1 sets:
12481 # \Ec - initial mode defaults (RIS)
12483 d220|Data General DASHER D220,
12485 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12486 use=dg+color8, use=d470c,
12488 d220-7b|Data General DASHER D220 in 7 bit mode,
12490 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12491 use=dg+color8, use=d470c-7b,
12493 # Initialization string 3 sets:
12494 # - default cursor (solid rectangle)
12495 # Reset string 2 sets:
12496 # ^^N - secondary character set
12497 # ^^FS0> - 8 bit international character set
12498 # ^^O - primary character set
12499 # ^^FS00 - default character set (matching the native keyboard language)
12501 d220-dg|Data General DASHER D220 color terminal in DG mode,
12503 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
12504 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
12507 # DASHER D230C color terminal in ANSI mode.
12508 # Like the D220 but with minor ANSI compatibility improvements.
12510 d230c|d230|Data General DASHER D230C,
12511 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
12512 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
12513 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12514 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
12515 smul=\E[4;50m, use=dgkeys+7b, use=d220,
12517 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
12520 # DASHER D400/D450 series terminals.
12521 # These add intelligent features like insert/delete to the D200 series.
12523 # Initialization string 2 sets:
12524 # ^^FQ2 - default cursor (solid rectangle)
12525 # ^^FW - character protection disabled
12526 # ^^FJ - normal (80 column) mode
12527 # ^^F\^ - horizontal scrolling enabled (for alignment)
12528 # ^^FX004? - margins at columns 0 and 79
12529 # ^^F] - horizontal scrolling disabled
12530 # ^^O - primary character set
12531 # ^^FS00 - default character set (the keyboard native language)
12532 # - (should reset scrolling regions, but that glitches the screen)
12533 # Reset string 1 sets:
12534 # ^^FA - all terminal defaults except scroll rate
12535 # Reset string 2 sets:
12536 # ^^F] - horizontal scrolling disabled
12537 # ^^FT0 - jump scrolling
12539 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
12541 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
12542 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
12543 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
12544 ich1=^^J, il1=^^FH,
12545 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
12546 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
12547 rs1=^^FA, rs2=\036F]\036FT0,
12548 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
12549 sgr0=\017\025\035\036E\036O, smacs=^^N,
12550 vpa=\020\177%p1%c, use=d210-dg,
12552 # DASHER D410/D460 series terminals in ANSI mode.
12553 # These add a large number of intelligent terminal features.
12555 # Initialization string 1 sets:
12557 # <0 - scrolling enabled
12558 # <1 - blink enabled
12559 # <2 - horizontal scrolling enabled (for alignment)
12560 # <4 - print characters regardless of attributes
12561 # \E[5;0v - normal (80 column) mode
12562 # \E[1;1;80w - margins at columns 1 and 80
12564 # 1 - print all characters even if protected
12565 # 6 - character protection disabled
12566 # <2 - horizontal scrolling disabled
12567 # - (should reset scrolling regions, but that glitches the screen)
12569 # Initialization string 2 sets:
12571 # 3;2 - default cursor (solid rectangle)
12572 # 2;1 - 8 bit operations
12573 # 1;1 - international keyboard language
12574 # \E(B - default primary character set (U.S. ASCII)
12575 # \E)4 - default secondary character set (international)
12576 # ^O - primary character set
12578 # Reset string 1 sets:
12579 # \Ec - initial mode defaults (RIS)
12580 # \E[<2h - horizontal scrolling disabled
12582 # Reset string 2 sets:
12584 # 4;0 - jump scrolling
12585 # 2;1 - 8 bit operations
12586 # 1;1 - 8 bit (international) keyboard language
12587 # \E(B - default primary character set (U.S. ASCII)
12588 # \E)4 - default secondary character set (international)
12590 d410|d411|d460|d461|Data General DASHER D410/D460 series,
12592 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
12593 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12594 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
12595 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
12596 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
12597 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
12598 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
12599 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
12600 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
12602 # Initialization string 2 sets:
12604 # 3;2 - default cursor (solid rectangle)
12605 # 2;0 - 7 bit operations
12606 # 1;0 - 7 bit (native) keyboard language
12607 # \E(0 - default character set (the keyboard native language)
12608 # ^O - primary character set
12610 # Reset string 2 sets:
12612 # 4;0 - jump scrolling
12613 # 2;0 - 7 bit operations
12614 # 1;0 - 7 bit (native) keyboard language
12615 # \E(0 - default character set (the keyboard native language)
12617 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
12619 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
12620 rs2=\E[4;0;2;0;1;0v\E(0,
12621 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
12622 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
12624 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
12626 enacs@, rmacs=\036FS00,
12627 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12628 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
12631 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
12633 # Initialization string 1 sets:
12635 # <0 - scrolling enabled
12636 # <1 - blink enabled
12637 # <2 - horizontal scrolling enabled (for alignment)
12638 # <4 - print characters regardless of attributes
12639 # \E[5;1v - compressed (135 column) mode
12640 # \E[1;1;126 - margins at columns 1 and 126
12642 # 1 - print all characters even if protected
12643 # 6 - character protection disabled
12644 # <2 - horizontal scrolling disabled
12645 # - (should reset scrolling regions, but that glitches the screen)
12647 # Reset string 1 sets:
12648 # \Ec - initial mode defaults (RIS)
12649 # \E[5;1v - compressed (135 column) mode
12650 # \E[1;1;126w - margins at columns 1 and 126
12651 # \E[<2h - horizontal scrolling disabled
12653 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
12655 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12656 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
12658 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
12660 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12661 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
12663 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
12666 # These add intelligent features like scrolling regions.
12667 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
12668 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
12669 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
12670 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
12671 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
12672 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
12673 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
12674 vpa=\036FPFF%p1%2.2X,
12675 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12677 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
12679 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
12680 rs2=\036P@1\036FK\036FX0083,
12681 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
12683 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
12686 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12688 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
12690 clear=\036FG\036PH, fsl=\036F}01\022,
12691 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
12692 tsl=\036F}00\036FP%p1%2.2X18\036PG,
12693 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
12696 # Relative cursor motions are confined to the current window,
12697 # which is not what the scrolling region specification expects.
12698 # Thus, relative vertical cursor positioning must be deleted.
12699 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
12700 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
12701 cud1@, cuu1@, ll@, use=d462+,
12703 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
12705 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
12707 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
12709 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
12711 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
12714 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
12716 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
12718 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
12720 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
12722 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
12725 d430c-dg|d430-dg|Data General D430C in DG mode,
12726 use=d413-dg, use=dg+fixed,
12727 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
12728 use=d413-dg, use=dg+ccc,
12730 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
12731 use=d413-unix, use=dgunix+fixed,
12732 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
12733 use=d413-unix-w, use=dgunix+fixed,
12734 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
12735 use=d413-unix-25, use=dgunix+fixed,
12736 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
12737 use=d413-unix-s, use=dgunix+fixed,
12738 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
12739 use=d413-unix-sr, use=dgunix+fixed,
12740 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
12741 use=d413-unix, use=dgunix+ccc,
12742 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
12743 use=d413-unix-w, use=dgunix+ccc,
12744 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
12745 use=d413-unix-25, use=dgunix+ccc,
12746 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
12747 use=d413-unix-s, use=dgunix+ccc,
12748 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
12749 use=d413-unix-sr, use=dgunix+ccc,
12751 # DASHER D470C color terminal in ANSI mode.
12752 # Like the D460 but with 16 colors and without a compressed mode.
12754 # Initialization string 1 sets:
12756 # <0 - scrolling enabled
12757 # <1 - blink enabled
12758 # <2 - horizontal scrolling enabled (for alignment)
12759 # <4 - print characters regardless of attributes
12760 # \E[1;1;80w - margins at columns 1 and 80
12762 # 1 - print all characters even if protected
12763 # 6 - character protection disabled
12764 # <2 - horizontal scrolling disabled
12765 # - (should reset scrolling regions, but that glitches the screen)
12767 d470c|d470|Data General DASHER D470C,
12768 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12769 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12770 use=dg+color, use=d460,
12772 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
12773 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12774 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
12775 use=dg+color, use=d460-7b,
12777 # Initialization string 2 sets:
12778 # ^^FQ2 - default cursor (solid rectangle)
12779 # ^^FW - character protection disabled
12780 # ^^F\^ - horizontal scrolling enabled (for alignment)
12781 # ^^FX004? - margins at columns 0 and 79
12782 # ^^F] - horizontal scrolling disabled
12783 # ^^O - primary character set
12784 # ^^FS00 - default character set (the keyboard native language)
12785 # - (should reset scrolling regions, but that glitches the screen)
12787 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
12788 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
12789 use=dgmode+color, use=d460-dg,
12791 # DASHER D555 terminal in ANSI mode.
12792 # Like a D411, but has an integrated phone.
12793 d555|Data General DASHER D555,
12795 d555-7b|Data General DASHER D555 in 7-bit mode,
12797 d555-w|Data General DASHER D555 in wide mode,
12799 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
12801 d555-dg|Data General DASHER D555 series in DG mode,
12804 # DASHER D577 terminal in ANSI mode.
12805 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
12806 d577|Data General DASHER D577,
12808 d577-7b|Data General DASHER D577 in 7-bit mode,
12810 d577-w|Data General DASHER D577 in wide mode,
12812 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
12815 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
12818 # DASHER D578 terminal.
12819 # Like a D577, but without compressed mode; like a D470C in this respect.
12821 # Initialization string 1 sets:
12823 # <0 - scrolling enabled
12824 # <1 - blink enabled
12825 # <2 - horizontal scrolling enabled (for alignment)
12826 # <4 - print characters regardless of attributes
12827 # \E[1;1;80w - margins at columns 1 and 80
12829 # 1 - print all characters even if protected
12830 # 6 - character protection disabled
12831 # <2 - horizontal scrolling disabled
12832 # - (should reset scrolling regions, but that glitches the screen)
12834 d578|Data General DASHER D578,
12835 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
12836 d578-7b|Data General DASHER D578 in 7-bit mode,
12837 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
12839 #### Datamedia (dm)
12841 # Datamedia was headquartered in Nashua, New Hampshire until it went
12842 # out of business in 1993, but the ID plates on the terminals referred
12843 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
12844 # manufacturer which threw out all information about the terminals.
12847 cs10|colorscan|Datamedia Color Scan 10,
12850 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
12851 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12852 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12853 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
12854 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12855 cs10-w|Datamedia Color Scan 10 with 132 columns,
12857 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
12859 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
12860 dm1520|dm1521|datamedia 1520,
12862 cols#80, it#8, lines#24,
12863 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
12864 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
12865 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
12867 # dm2500: this terminal has both <ich> and <smir>. Applications using
12868 # termcap/terminfo directly (rather than through ncurses) might be confused.
12869 dm2500|datamedia2500|datamedia 2500,
12872 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
12873 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
12874 dch1=\020\010\030\035$<10*>,
12875 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
12876 ich1=\020\034\030\035$<10*>,
12877 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
12878 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
12879 smdc=^P, smir=^P, smso=^N,
12880 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
12881 # also, has a meta-key.
12882 # From: <goldberger@su-csli.arpa>
12883 # (dmchat: ":MT:" changed to ":km:" -- esr)
12884 dmchat|dmchat version of datamedia 2500,
12886 dl1=\020\032\030\035$<2/>,
12887 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
12888 # (dm3025: ":MT:" changed to ":km:" -- esr)
12889 dm3025|datamedia 3025a,
12891 cols#80, it#8, lines#24,
12892 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12893 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
12894 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
12895 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
12896 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
12897 smir=\EP, smso=\EO1,
12898 dm3045|datamedia 3045a,
12899 OTbs, am, eo, km@, ul, xenl,
12900 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
12901 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
12902 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
12903 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
12905 # Datamedia DT80 soft switches:
12906 # 1 0=Jump 1=Smooth
12907 # Autorepeat 0=off 1=on
12908 # Screen 0=Dark 1=light
12909 # Cursor 0=u/l 1=block
12911 # 2 Margin Bell 0=off 1=on
12912 # Keyclick 0=off 1=on
12913 # Ansi/VT52 0=VT52 1=Ansi
12914 # Xon/Xoff 0=Off 1=On
12916 # 3 Shift3 0=Hash 1=UK Pound
12918 # Newline 0=Off 1=On
12919 # Interlace 0=Off 1=On
12921 # 4 Parity 0=Odd 1=Even
12922 # Parity 0=Off 1=On
12923 # Bits/Char 0=7 1=8
12924 # Power 0=60Hz 1=50Hz
12926 # 5 Line Interface 0=EIA 1=Loop
12927 # Aux Interface 0=EIA 1=Loop
12928 # Local Copy 0=Off 1=On
12931 # 6 Aux Parity 0=Odd 1=Even
12932 # Aux Parity 0=Off 1=On
12933 # Aux Bits/Char 0=7 1=8
12934 # CRT Saver 0=Off 1=On
12935 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
12936 dm80|dmdt80|dt80|datamedia dt80/1,
12937 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
12938 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12939 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
12940 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12942 # except in 132 column mode, where it needs a little padding.
12943 # This is still less padding than the vt100, and you can always turn on
12944 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
12946 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
12948 clear=\E[H\E[2J$<50/>, cud1=^J,
12949 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
12950 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
12951 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
12952 dt80-sas|Datamedia DT803/DTX for SAS usage,
12955 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
12956 bel=^G, clear=^L, cr=^M,
12957 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
12958 cub1=^H, cud1=\EB, cuf1=^\,
12959 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
12960 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
12961 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
12962 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
12963 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
12964 smso=\E$2\004, tbc=\E'0,
12966 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
12967 # These aren't end-all Excel termcaps; but do insert/delete char/line
12968 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
12969 # The naming convention has been bent somewhat, with the use of E? (where
12970 # E is for 'Excel') as # a name. This was done to distinguish the entries
12971 # from the other Datamedias in use here, and yet to associate a model of
12972 # the Excel terminals with the regular datamedia terminals that share
12973 # major characteristics.
12974 excel62|excel64|datamedia Excel 62,
12975 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
12976 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
12978 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
12979 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
12980 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
12982 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
12983 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
12984 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
12985 smir=\E[4h, use=dt80,
12989 # Falco Data Products
12990 # 440 Potrero Avenue
12991 # Sunnyvale, CA 940864-196
12992 # Vox: (800)-325-2648
12993 # Fax: (408)-745-7860
12994 # Net: techsup@charm.sys.falco.com
12996 # Current Falco models as of 1995 are generally ANSI-compatible and support
12997 # emulations of DEC VT-series, Wyse, and Televideo types.
13000 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13001 # This terminal was released around 1983 and was discontinued long ago.
13002 # The standout and underline highlights are the same.
13003 falco|ts1|ts-1|falco ts-1,
13005 cols#80, it#8, lines#24,
13006 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13007 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13008 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13009 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13010 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13011 smir=\Eq, smso=\Eg1, smul=\Eg1,
13012 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13013 OTbs, am, da, db, mir, msgr, ul,
13014 cols#80, it#8, lines#24,
13015 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13016 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13017 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13018 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13019 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13020 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13021 smso=\Eg4, smul=\Eg1,
13022 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13023 ts100|ts100-sp|falco ts100-sp,
13024 am, mir, msgr, xenl, xon,
13025 cols#80, it#8, lines#24, vt#3,
13026 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13027 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13028 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13029 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13030 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13031 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13032 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13033 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13034 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13035 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13036 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13037 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13038 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13039 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13040 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13041 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13043 ts100-ctxt|falco ts-100 saving context,
13044 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13046 #### Florida Computer Graphics
13049 # Florida Computer Graphics Beacon System, using terminal emulator program
13050 # "host.com", as provided by FCG. This description is for an early release
13051 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13054 # From: David Bryant <cbosg!djb> 1/7/83
13055 beacon|FCG Beacon System,
13058 bel=\ESTART\r\E37\r\EEND\r$<1>,
13059 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13060 cub1=^H, cud1=^J, cuf1=\EV,
13061 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13062 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13063 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13064 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13065 rmul=\ESTART\r\E60\,0\r\EEND\r,
13066 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13067 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13068 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13069 smul=\ESTART\r\E60\,1\r\EEND\r,
13074 # The f1720a differences from ANSI: no auto margin, destructive
13075 # tabs, # of lines, funny highlighting and underlining
13076 f1720|f1720a|fluke 1720A,
13078 cols#80, lines#16, xmc#1,
13079 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13080 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13081 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13082 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13083 smso=\E[7m, smul=\E[4m,
13085 #### Liberty Electronics (Freedom)
13087 # Liberty Electronics
13088 # 48089 Fremont Blvd
13090 # Vox: (510)-623-6000
13091 # Fax: (510)-623-7021
13093 # From: <faletti@berkeley.edu>
13094 # (f100: added empty <acsc> to suppress a tic warning;
13095 # made this relative to adm+sgr -- note that <invis> isn't
13096 # known to work for f100 but does on the f110. --esr)
13097 f100|freedom|freedom100|freedom model 100,
13098 OTbs, am, bw, hs, mir, msgr, xon,
13100 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13101 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13102 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13103 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13104 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13105 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13106 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13107 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13108 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13109 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13110 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13111 f100-rv|freedom-rv|freedom 100 in reverse video,
13112 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13113 # The f110 and f200 have problems with vi(1). They use the ^V
13114 # code for the down cursor key. When kcud1 is defined in terminfo
13115 # as ^V, the Control Character Quoting capability (^V in insert mode)
13116 # is lost! It cannot be remapped in vi because it is necessary to enter
13117 # a ^V to to quote the ^V that is being remapped!!!
13119 # f110/f200 users will have to decide whether
13120 # to lose the down cursor key or the quoting capability. We will opt
13121 # initially for leaving the quoting capability out, since use of VI
13122 # is not generally applicable to most interactive applications
13123 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13124 f110|freedom110|Liberty Freedom 110,
13127 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13128 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13129 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13130 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13131 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13132 smso=\EG<, tsl=\Ef, use=f100,
13133 f110-14|Liberty Freedom 110 14inch,
13135 f110-w|Liberty Freedom 110 - 132 cols,
13136 cols#132, use=f110,
13137 f110-14w|Liberty Freedom 110 14in/132 cols,
13140 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13141 f200|freedom200|Liberty Freedom 200,
13142 OTbs, am, eslok, hs, mir, msgr, xon,
13143 cols#80, it#8, lines#24, wsl#80,
13144 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13145 clear=^Z, cnorm=\E.1, cr=^M,
13146 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13147 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13148 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13149 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13150 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13151 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13152 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13153 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13154 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13155 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13156 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13157 f200-w|Liberty Freedom 200 - 132 cols,
13158 cols#132, use=f200,
13159 # The f200 has the ability to reprogram the down cursor key. The key is
13160 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13161 # so powering the terminal off and on will not cause the change to be lost.
13162 f200vi|Liberty Freedom 200 for vi,
13163 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13164 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13165 cols#132, use=f200vi,
13169 # Graphon Corporation
13170 # 544 Division Street
13171 # Campbell, CA 95008
13172 # Vox: (408)-370-4080
13173 # Fax: (408)-370-5047
13174 # Net: troy@graphon.com (Troy Morrison)
13177 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13178 # including one odd hybrid that starts out life on power-up as a character
13179 # terminal, than can be switched to X graphics mode (driven over the serial
13180 # line) by an escape sequence. No info on this beast yet.
13181 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13182 go140|graphon go-140,
13184 cols#80, it#8, lines#24,
13185 clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
13186 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13187 ed=\E[J$<10/>, el=\E[K, ht=^I,
13188 if=/usr/share/tabset/vt100, il1=\E[L,
13189 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13190 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13191 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13192 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13193 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13194 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13195 go140w|graphon go-140 in 132 column mode,
13198 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13200 # Hacked up vt200 termcap to handle GO-225/VT220
13201 # From: <edm@nwnexus.WA.COM>
13202 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13203 go225|go-225|Graphon 225,
13204 OTbs, am, mir, xenl,
13205 cols#80, it#8, lines#25, vt#3,
13206 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13207 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13208 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13209 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13210 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13211 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13212 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13213 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13214 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13215 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13216 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13217 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13219 #### Harris (Beehive)
13221 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13222 # Their terminal group is ancient history now (1995) though the parent
13223 # company is still in business.
13226 # Beehive documentation is undated and marked Preliminary and has no figures
13227 # so we must have early Superbee2 (Model 600, according to phone conversation
13228 # with mfr.). It has proved reliable except for some missing padding
13229 # (notably after \EK and <nl> at bottom of screen).
13231 # The key idea is that AEP mode is poison for <cup> & that US's in
13232 # the local memory should be avoided like the plague. That means
13233 # that the 2048 character local buffer is used as 25 lines of 80
13234 # characters, period. No scrolling local memory, folks. It also
13235 # appears that we cannot use naked INS LINE feature since it uses
13236 # US. The sbi fakes <il1> with an 80-space insert that may be too
13237 # slow at low speeds; also spaces get converted to \040 which is
13238 # too long for some programs (not vi). DEL LINE is ok but slow.
13240 # The <nl> string is designed for last line of screen ONLY; cup to
13241 # 25th line corrects the motion inherent in scrolling to Page 1.
13243 # There is one understood bug. It is that the screen appears to
13244 # pop to a new (blank) page after a <nel>, or leave a half-line
13245 # ellipsis to a quad that is the extra 48 memory locations. The
13246 # data received is dumped into memory but not displayed. Not to
13247 # worry if <cup> is being used; the lines not displayed will be,
13248 # whenever the cursor is moved up there. Since <cup> is addressed
13249 # relative to MEMORY of window, nothing is lost; but beware of
13250 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13251 # therefore, is setenv MORE -c .
13253 # WARNING: Not all features tested.
13255 # Timings are assembled from 3 sources. Some timings may reflect
13256 # SB2/Model 300 that were used if more conservative.
13257 # Tested on a Model 600 at 1200 and 9600 bd.
13259 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13260 # placed on the keyboard and useless because of AEP, is made
13261 # into a backspace key. In use ESC must be pressed twice (to send)
13262 # and sending ^C must be prefixed by ESC to avoid that weird
13263 # transmit mode associated with ENTER key.
13265 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13266 # the screen, then it has dropped into ENTER mode; hit
13267 # RESET--ONLINE--!tset.
13269 # As delivered this machine has a FATAL feature that will throw
13270 # it into that strange transmit state (SPOW) if the space bar is
13271 # hit after a CR is received, but before receiving a LF (or a
13274 # The circuits MUST be modified to eliminate the SPOW latch.
13275 # This is done by strapping on chip A46 of the I/O board; cut
13276 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13277 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13278 # With this modification absurdly high timings on cr are
13281 # NOTE WELL that the rear panel switch should be set to CR/LF,
13284 sb1|beehive superbee,
13285 OTbs, am, bw, da, db, mir, ul, xsb,
13286 cols#80, lines#25, xmc#1,
13287 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
13288 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
13289 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
13290 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
13291 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
13292 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
13293 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
13294 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
13295 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
13296 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
13297 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
13298 smso=\E_1, smul=\E_0, tbc=\E3,
13299 sbi|superbee|beehive superbee at Indiana U.,
13301 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
13303 # Alternate (older) description of Superbee - f1=escape, f2=^C.
13304 # Note: there are at least 3 kinds of superbees in the world. The sb1
13305 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
13306 # The sb3 puts garbage on the bottom of the screen when you scroll with
13307 # the switch in the back set to CRLF instead of AEP. This description
13308 # is tested on the sb2 but should work on all with either switch setting.
13309 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
13310 # the other two if you want to try to hit that tiny escape key.
13311 # This description is tricky: being able to use cup depends on there being
13312 # 2048 bytes of memory and the hairy <nl> string.
13313 superbee-xsb|beehive super bee,
13315 cols#80, it#8, lines#25,
13316 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
13317 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
13318 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
13319 home=\EH, ht=^I, hts=\E1,
13320 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
13321 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
13322 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
13323 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
13324 # This loses on lines > 80 chars long, use at your own risk
13325 superbeeic|super bee with insert char,
13326 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
13327 sb2|sb3|fixed superbee,
13328 xsb@, use=superbee,
13330 #### Beehive Medical Electronics
13332 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
13333 # Regarding your question though; Beehive terminals weren't made by Harris.
13334 # They were made by Beehive Medical Electronics in Utah. They went out of
13335 # business in the early '80s.
13337 # (OK, then, I don't know why a couple of these say "harris beehive".)
13340 # Reports are that most of these Beehive entries (except superbee) have not
13341 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
13343 # (bee: <ich1> was empty, which is obviously bogus -- esr)
13344 beehive|bee|harris beehive,
13347 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13348 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13349 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
13350 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13351 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
13352 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
13353 smir=\EQ, smso=\EdP, smul=\Ed`,
13354 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
13355 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
13356 # look at those spaces in <rmso>/<smso>. Seems strange to me...
13357 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
13358 # really care, cook up one using ^F -- esr)
13359 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
13361 cols#80, it#8, lines#20,
13362 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
13363 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
13364 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
13365 beehive4|bh4|beehive 4,
13368 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
13369 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
13370 # There was an early Australian kit-built computer called a "Microbee".
13371 # It's not clear whether this is for one of those or for a relative
13373 microb|microbee|micro bee series,
13375 cols#80, it#8, lines#24,
13376 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13377 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13378 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
13379 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
13380 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
13381 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
13383 # 8675, 8686, and bee from Cyrus Rahman
13384 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
13385 ha8675|harris 8675,
13386 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
13387 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
13388 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
13389 kf8=\177, kf9=\Ee, use=bee,
13390 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
13392 ha8686|harris 8686,
13393 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
13394 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
13395 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
13396 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
13397 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
13402 # Hazeltine appears to be out of the terminal business as of 1995. These
13403 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
13404 # Harris. They have a hazeltine.com domain (but no web page there ) and can
13408 # 450 East Pulaski Road
13409 # Greenlawn, New York 11740
13411 # As late as 1993, manuals for the terminal product line could still be
13414 # TRW Customer Service Division
13417 # Fairfield, NJ 07007-2078
13419 # They're now (1998) a subsidiary of General Electric, operating under the
13420 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
13421 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
13424 # Since <cuf1> is blank, when you want to erase something you
13425 # are out of luck. You will have to do ^L's a lot to
13426 # redraw the screen. h1000 is untested. It doesn't work in
13427 # vi - this terminal is too dumb for even vi. (The code is
13428 # there but it isn't debugged for this case.)
13429 hz1000|hazeltine 1000,
13432 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
13434 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
13435 hz1420|hazeltine 1420,
13438 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
13439 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
13440 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
13442 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
13443 # freakout with out-of-range args and tn3270. No hz since it needs to
13445 hz1500|hazeltine 1500,
13448 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13449 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
13450 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
13451 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
13452 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
13453 # h1510 assumed to be in sane escape mode. Else use h1500.
13454 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
13455 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
13456 # removed incorrect and overridden ":do=^J:" -- esr)
13457 hz1510|hazeltine 1510,
13460 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
13461 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
13462 el=\E^O, il1=\E^Z, ind=^J,
13464 # The following switch settings are assumed for normal operation:
13465 # FULL CR U/L_CASE ESCAPE
13466 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
13467 # Other switches may be set for operator convenience or communication
13469 hz1520|Hazeltine 1520,
13470 OTbs, am, bw, msgr,
13472 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
13473 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13474 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
13475 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
13476 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
13477 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
13478 # This version works with the escape switch off
13479 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
13480 hz1520-noesc|hazeltine 1520,
13483 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13484 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
13485 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
13486 # Note: the h1552 appears to be the first Hazeltine terminal which
13487 # is not braindamaged. It has tildes and backprimes and everything!
13488 # Be sure the auto lf/cr switch is set to cr.
13489 hz1552|hazeltine 1552,
13491 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
13492 lf2=red, lf3=green, use=vt52,
13493 hz1552-rv|hazeltine 1552 reverse video,
13494 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
13495 # Note: h2000 won't work well because of a clash between upper case and ~'s.
13496 hz2000|hazeltine 2000,
13499 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
13500 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
13501 il1=~\032$<6>, ind=^J, pad=\177,
13502 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
13503 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
13504 # to work ok. There is one problem though if one types a lot of garbage
13505 # characters very fast vi seems not able to keep up and hangs while trying
13506 # to insert. That's in insert mode while trying to insert in the middle of
13507 # a line. It might be because the Esprit doesn't have insert char and delete
13508 # char as a built in function. Vi has to delete to end of line and then
13509 # redraw the rest of the line.
13510 esprit|Hazeltine Esprit I,
13513 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
13514 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13515 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
13516 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
13517 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
13518 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
13519 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
13520 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
13521 esprit-am|hazeltine esprit auto-margin,
13523 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
13524 # Vi it seems always wants to send a control J for "do" and it turned out
13525 # that the terminal would work somewhat if the auto LF/CR was turned off.
13526 # (hmod1: removed :dn=~^K: -- esr)
13527 hmod1|Hazeltine Modular 1,
13530 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13531 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
13532 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
13533 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
13535 # Hazeltine Executive 80 Model 30 (1554?)
13536 # from Will Martin <control@ALMSA-1.ARPA> via BRL
13537 # Like VT100, except for different "am" behavior.
13538 hazel|exec80|h80|he80|Hazeltine Executive 80,
13540 cols#80, it#8, lines#24, vt#3,
13541 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
13542 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13543 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
13544 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
13545 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
13546 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
13547 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13548 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
13549 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
13550 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
13551 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13552 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
13558 ibm327x|line mode IBM 3270 style,
13560 clear=^M^J, el=^M, home=^M,
13562 ibm3101|i3101|IBM 3101-10,
13565 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13566 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13567 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
13568 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
13569 ibm3151|IBM 3151 display,
13570 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
13571 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
13572 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
13573 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
13574 # removed kend, knp, kpp -TD
13575 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
13576 OTbs, am, mir, msgr,
13577 cols#80, it#8, lines#24,
13578 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
13579 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
13580 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13581 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
13582 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
13583 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
13584 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
13585 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
13586 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
13587 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
13588 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
13589 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
13590 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
13591 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
13592 rmso=\E4@, rmul=\E4@,
13593 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
13594 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
13596 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
13597 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
13598 ibm3162|IBM 3162 display,
13599 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
13600 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
13603 # This really should not use setab/setaf, but it is clear that the
13604 # original terminfo does not toggle red/blue colors as in setb/setf.
13605 ibm3164|i3164|IBM 3164,
13607 colors#8, pairs#64,
13608 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
13609 setab=\E4 %p1%{64}%+%c,
13610 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
13611 smcup=\E!9/N\E>B, use=ibm3161,
13613 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
13615 cols#80, it#8, lines#25,
13616 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13617 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13618 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13619 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13620 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13621 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
13622 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
13623 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
13624 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13625 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
13626 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
13627 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
13628 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
13629 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
13630 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
13631 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
13632 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
13633 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
13634 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13635 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
13636 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
13637 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
13638 rmso=\E[m, rmul=\E[m, rs2=\Ec,
13639 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
13640 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13642 ibmaed|IBM Experimental display,
13643 OTbs, am, eo, msgr,
13644 cols#80, it#8, lines#52,
13645 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
13646 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
13647 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
13648 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13649 rmso=\E0, sgr0=\E0, smso=\E0,
13650 ibm-apl|apl|IBM apl terminal simulator,
13651 lines#25, use=dm1520,
13652 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
13653 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
13654 ibmmono|IBM workstation monochrome,
13656 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
13657 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
13658 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
13659 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
13660 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
13661 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
13663 ibmega|IBM Enhanced Color Display,
13664 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13665 nel=^M^J, use=ibmmono,
13666 # This color scheme is assumed in some recent IBM terminal descriptions
13667 # (green on black, emulated on a 16-color terminal).
13668 ibm+color|IBM color definitions,
13669 colors#8, ncv#3, pairs#64,
13671 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
13672 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
13673 ibm+16color|IBM aixterm color definitions,
13674 colors#16, pairs#256,
13675 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
13676 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
13677 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13678 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13679 ibm5154|IBM 5154 Color display,
13680 colors#8, ncv@, pairs#64,
13681 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13683 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
13684 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
13686 ibmvga-c|IBM VGA display color termcap,
13687 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13688 nel=^M^J, use=ibmega-c,
13689 ibmvga|IBM VGA display,
13690 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13691 nel=^M^J, use=ibmega,
13692 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
13693 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
13695 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
13696 ibm6155|IBM 6155 Black & White display,
13697 blink@, bold@, use=ibm5151,
13698 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
13699 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
13701 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
13702 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
13704 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
13706 ibm6154|IBM 6154 Color displays,
13707 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13708 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13709 sgr0=\E[0;10m, use=ibm5154,
13710 ibm6153|IBM 6153 Black & White display,
13711 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13712 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13713 sgr0=\E[0;10m, use=ibm5151,
13714 ibm6153-90|IBM 6153 Black & White display,
13716 blink@, bold@, use=ibm5151,
13717 ibm6153-40|IBM 6153 Black & White display,
13718 cols#40, lines#12, use=ibm6153-90,
13719 ibm8512|ibm8513|IBM color VGA Terminal,
13721 cols#80, it#8, lines#25,
13722 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
13723 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
13724 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
13725 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
13726 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
13727 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
13728 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13729 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
13730 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
13731 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
13732 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
13733 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
13734 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13736 hft-c|HFT with Color,
13737 colors#8, pairs#64,
13738 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
13739 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
13740 use=ibm5151, use=ibm+color,
13741 hft-c-old|HFT with Color PC850,
13742 colors#8, pairs#64,
13743 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13745 hft-old|AIWS High Function Terminal,
13748 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13749 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13750 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
13751 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
13752 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13753 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
13754 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13755 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
13756 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
13757 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
13758 ibm-system1|system1|ibm system/1 computer,
13761 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
13762 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
13764 # lft-pc850 : IBM Low Function Terminal Device
13765 # lft "supports" underline, bold, and blink in the sense that the lft code
13766 # sets all the right bits. HOWEVER, depending upon the adapter, these
13767 # attributes may or may not be supported by the device driver.
13768 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
13770 cols#80, it#8, lines#25,
13771 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13772 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13773 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13774 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13775 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13776 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
13777 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
13778 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
13779 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
13780 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
13781 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
13782 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
13783 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
13784 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
13785 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
13786 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
13787 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
13788 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
13789 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13790 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
13791 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
13792 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
13793 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
13794 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13795 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13797 ibm5081|hft|IBM Megapel Color display,
13798 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
13799 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
13800 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
13803 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
13805 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
13807 ibm8514|IBM 8514/a color VGA display,
13809 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
13810 ibm8514-c|IBM 8514 color display with standout and underline,
13813 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
13814 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
13818 # AIX entries. IBM ships these with AIX 3.2.5.
13819 # -- added rc, sc based on manpage -TD
13820 # Note that we could use ibm+16color, but that is not how IBM defines this one.
13821 aixterm|IBM Aixterm Terminal Emulator,
13823 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13824 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
13825 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13826 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
13827 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
13829 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13830 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
13831 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13832 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
13833 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
13835 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
13836 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13837 tsl=\E[?%p1%dT, use=ibm6153,
13838 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
13839 acsc@, use=aixterm,
13840 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
13841 acsc@, use=aixterm-m,
13843 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
13844 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
13845 use=ibm+16color, use=aixterm,
13847 #### Infoton/General Terminal Corp.
13850 # gt100 sounds like something DEC would come out with. Let's hope they don't.
13851 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
13854 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13855 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
13856 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
13857 ind=^J, rmso=\Ea, smso=\Eb,
13861 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13862 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
13863 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
13864 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
13865 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
13869 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
13870 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
13871 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
13875 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
13876 ed=^K, ind=^J, ll=^H^\,
13878 # The ICL6402 was actually the Kokusai Display System 6402.
13879 # The 6404 was the KDS7372 (color version of the 6402).
13881 # ICL6404 control codes follow:
13884 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
13885 #ctrl-A set SOM position at cursor position
13891 #ctrl-L Cursor right
13892 #ctrl-M Carriage return
13893 #ctrl-N Disable xon/xoff to host
13894 #ctrl-O Enable xon/xoff to host
13895 #ctrl-R Enable bidirectional mode
13896 #ctrl-T Disable bidirectional mode
13897 #ctrl-V Cursor down
13898 #ctrl-Z Clear unprotected data to insert char
13899 #ctrl-^ Cursor home
13902 #ESC lead-in char for multiple character command
13904 #ESC space R execute power on sequence
13905 #ESC ! p1 p2 define scroll region:
13906 # p1 = scroll top line: 20h - 37h
13907 # p1 = scroll bottom line: 20h - 37h
13908 #ESC " unlock keyboard
13909 #ESC # lock keyboard
13910 #ESC $ Semi-graphics mode on
13911 #ESC % Semi-graphics mode off
13912 #ESC & protect mode on
13913 #ESC ' protect mode off
13914 #ESC ( write protect mode off (full intensity)
13915 #ESC ) write protect mode on (half intensity)
13917 #ESC * clear screen
13918 #ESC + clear unprotected data to insert char
13919 #ESC , clear unprotected data to half intensity spaces
13920 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
13921 # p1 = page number 0 - 3
13922 # p2 = row 20h - 7fh
13923 # p3 = column (lo) 20h - 7fh
13924 # p4 = column (hi) 20h - 21h (only 132 col)
13925 #ESC . p1 set cursor style:
13926 # p1 = 0 invisible cursor
13927 # p1 = 1 block blinking cursor
13928 # p1 = 2 block steady cursor
13929 # p1 = 3 underline blinking cursor
13930 # p1 = 4 underline steady cursor
13931 #ESC / transmit cursor location (page, row, column)
13932 #ESC 0 p1 p2 p3 p4 program edit key:
13933 # p1 = edit key code: '@'-'S', '`'-'s'
13934 # p2 p3 p4 = program data (3 bytes)
13937 #ESC 2 clear tab at cursor
13938 #ESC 3 clear all tabs
13939 #ESC 4 send unprotect line to cursor
13940 #ESC 5 send unprotect page to cursor
13941 #ESC 6 send line to cursor
13942 #ESC 7 send page to cursor
13943 #ESC 8 n set scroll mode:
13944 # n = 0 set jump scroll
13945 # n = 1 set smooth scroll
13946 #ESC 9 n control display:
13947 # n = 0 display off
13949 #ESC : clear unprotected data to null
13950 #ESC ; clear unprotected data to insert char
13953 #ESC = p1 p2 address cursor to row, column
13954 # p1 = row 20h - 7fh
13955 # p2 = column (lo) 20h - 7fh
13956 # p3 = column (hi) 20h - 21h (only 132 col)
13957 #ESC > keyclick off
13958 #ESC ? transmit cursor location (row, column)
13960 #ESC @ copy print mode on
13961 #ESC A copy print mode off
13962 #ESC B block mode on
13963 #ESC C block mode off (conversation mode)
13964 #ESC D F set full duplex
13965 #ESC D H set half duplex
13967 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
13968 # 0 = black, 1 = red, 2 = green, 3 = yellow
13969 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
13970 #ESC G n set serial field attribute (n = 30h - 3Fh)
13971 #ESC H n full graphics mode:
13972 # n = 0 exit full graphics mode
13973 # n = 1 enter full graphics mode
13976 #ESC K forward page
13978 #ESC L unformatted page print
13979 #ESC M L move window left (132 col mode only)
13980 #ESC M R move window right (132 col mode only)
13981 #ESC N set page edit (clear line edit)
13982 #ESC O set line edit (clear page edit)
13983 #ESC P formatted page print
13984 #ESC Q character insert
13986 #ESC S send message unprotected only
13987 #ESC T erase line to insert char
13988 #ESC U set monitor mode (see ESC X, ESC u)
13990 #ESC V n select video attribute mode:
13991 # n = 0 serial field attribute mode
13992 # n = 1 parallel character attribute mode
13993 #ESC V 2 n define line attribute:
13994 # n = 0 single width single height
13995 # n = 1 single width double height
13996 # n = 2 double width single height
13997 # n = 3 double width double height
13998 #ESC V 3 n select character font:
13999 # n = 0 system font
14000 # n = 1 user defined font
14001 #ESC V 4 n select screen mode:
14002 # n = 0 page screen mode
14003 # n = 1 virtual screen mode
14004 #ESC V 5 n control mouse mode:
14005 # n = 0 disable mouse
14006 # n = 1 enable sample mode
14007 # n = 2 send mouse information
14008 # n = 3 enable request mode
14009 #ESC W character delete
14010 #ESC X clear monitor mode (see ESC U, ESC u)
14011 #ESC Y erase page to insert char
14013 #ESC Z n send user/status line:
14014 # n = 0 send user line
14015 # n = 1 send status line
14016 # n = 2 send terminal ID
14017 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14021 # 3 = blink blank (= blank)
14023 # 5 = reverse blank
14024 # 6 = reverse blink
14025 # 7 = reverse blink blank (= reverse blank)
14027 # 9 = underline blank
14028 # : = underline blink
14029 # ; = underline blink blank
14030 # < = reverse underline
14031 # = = reverse underline blank
14032 # > = reverse underline blink
14033 # ? = reverse underline blink blank
14034 # p2, p3: f/grnd, b/grnd colour
14035 # (see ESC F for colours)
14036 # use ZZ for mono, eg.
14037 # ESC [ 0 Z Z for normal
14038 # ESC [ 4 Z Z for inverse etc.
14040 #ESC \ n set page size:
14041 # n = 1 24 lines/page
14042 # n = 2 48 lines/page
14043 # n = 3 72 lines/page
14044 # n = 4 96 lines/page
14045 #ESC ] n set Wordstar mode:
14046 # n = 0 normal (KDS7372) mode
14047 # n = 1 Wordstar mode
14049 #ESC b set foreground colour screen
14051 #ESC c n enter self-test mode:
14052 # n = 0 exit self test mode
14056 # n = 4 screen display test
14057 # n = 5 main/printer port test
14058 # n = 6 mouse port test
14059 # n = 7 graphics board test
14060 # n = 8 graphics memory test
14061 # n = 9 display all 'E'
14062 # n = : display all 'H'
14063 #ESC d set background colour screen
14065 #ESC e n program insert char (n = insert char)
14066 #ESC f text CR load user status line with 'text'
14068 #ESC g display user status line on 25th line
14069 #ESC h display system status line on 25th line
14071 #ESC j reverse linefeed
14072 #ESC k n duplex/local edit mode:
14073 # n = 0 duplex edit mode
14074 # n = 1 local edit mode
14075 #ESC l n select virtual screen:
14078 #ESC m save current config to NVRAM
14079 #ESC n p1 select display screen:
14084 #ESC o p1 p2 set characters/line and attribute:
14085 # p1 = 0 80 chars/line
14087 #ESC o p1 p2 set characters/line and attribute:
14088 # p1 = 0 80 chars/line
14089 # p1 = 1 132 chars/line
14090 # p2 = 0 single width single height
14091 # p2 = 1 single width double height
14092 # p2 = 2 double width single height
14093 # p2 = 3 double width double height
14095 #ESC q insert mode on
14096 #ESC r edit mode on
14097 #ESC s send message all
14098 #ESC t erase line to null
14099 #ESC u clear monitor mode (see ESC U, ESC X)
14100 #ESC v autopage mode on
14101 #ESC w autopage mode off
14102 #ESC x p1 p2 p3 define delimiter code...
14103 #ESC y erase page to null
14105 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14106 # p1 = starting row
14107 # p2 = starting column
14111 #ESC { p1 p2 p3 p4 configure main port
14112 # (baud, stop bits, parity, word length)
14114 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14115 # p1 = function key code:
14116 # '1' - ';' normal f1- f11
14117 # '<' - 'F' shifted f1 - f11
14118 # p2 = program mode:
14122 # Ctrl-Y = terminator
14123 # (use Ctrl-P to escape ^P, ^Y )
14125 #ESC } p1 p2 p3 p4 configure printer port
14126 # (baud, stop bits, parity, word length)
14127 #ESC ~ send system status
14129 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14131 # Entry is by esr going solely on above information and is UNTESTED.
14132 # This actually looks a lot like a Televideo 9xx.
14133 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14134 # to make color work without a test terminal. The <am> capability is a guess.
14135 # The initialization string sets conversation mode, blinking underline cursor,
14136 # full duplex, parallel attribute mode, display user status line, white
14137 # foreground, black background, normal highlight.
14139 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14142 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14144 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14145 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14146 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14147 hts=\E1, il1=\EE, invis=\E[1ZZ,
14148 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14149 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14150 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14151 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
14152 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14153 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14154 rs2=\Eo1, use=icl6404,
14156 #### Interactive Systems Corp
14158 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14159 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14160 # bought out by Sun.
14163 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14164 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14165 # ":le=^_:" later overridden -- esr)
14166 intext|Interactive Systems Corporation modified owl 1200,
14168 cols#80, it#8, lines#24, xmc#1,
14169 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14170 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14171 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14172 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14173 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14174 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14175 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14176 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14178 intext2|intextii|INTERACTIVE modified owl 1251,
14180 cols#80, lines#24, xmc#0,
14181 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
14182 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
14183 dl1=\E[M, ed=\E[J, el=\E[K,
14184 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14185 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14186 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14187 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14188 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14189 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14190 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14191 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14194 #### Kimtron (abm, kt)
14196 # Kimtron seems to be history, but as March 1998 these people are still
14197 # offering repair services for Kimtron equipment:
14199 # Com/Pair Monitor Service
14200 # 1105 N. Cliff Ave.
14201 # Sioux Falls, South Dakota 57103
14203 # WATS voice: 1-800/398-4946
14204 # POTS fax: +1 605/338-8709
14205 # POTS voice: +1 605/338-9650
14206 # Email: <compair@sd.cybernex.net>
14207 # Internet/Web: <http://www.com-pair.com>
14209 # Kimtron entries include (undocumented) codes for: enter dim mode,
14210 # enter bold mode, enter reverse mode, turn off all attributes.
14213 # Kimtron ABM 85 added by Dual Systems
14214 # (abm85: removed duplicated ":kd=^J:" -- esr)
14215 abm85|Kimtron ABM 85,
14216 OTbs, am, bw, msgr,
14217 cols#80, it#8, lines#24, xmc#1,
14218 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14219 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14220 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14221 if=/usr/share/tabset/stdcrt, il1=\EE,
14222 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14223 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14224 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14225 # Kimtron ABM 85H added by Dual Systems.
14226 # Some notes about the abm85h entries:
14227 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14228 # firmware revs prior to SP51
14229 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14230 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14231 # in some places and NOT software settable i.e., <is2> can't fix it)
14232 # 3) In 85h mode, the arrow keys and special functions transmit when
14233 # the terminal is in dup-edit, and work only locally in local-edit.
14234 # Vi won't swallow `del char' for instance, but <smcup> turns on
14235 # dup-edit anyway so that the arrow keys will work right. If the
14236 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14237 # <is2>. Note that 920E mode does not have software commands to toggle
14238 # between dup and local edit, so you get whatever was set last on the
14240 # 4) <flash> attribute is nice, but seems too slow to work correctly
14242 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14243 # are selected, the <xmc@> entry should be removed.
14244 # 6) auto new-line should be on (selectable from setup mode only)
14246 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14247 abm85h|Kimtron ABM 85H native mode,
14250 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14252 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14253 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14255 abm85e|Kimtron ABM 85H in 920E mode,
14257 bel=^G, dim=\E), flash@,
14258 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14259 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14260 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14263 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14264 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14265 # From: <malman@bbn-vax.arpa>
14266 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14267 kt7|kimtron model kt-7,
14269 cols#80, it#8, lines#24,
14270 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14271 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14272 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14273 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14274 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14275 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14276 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14277 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14278 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14279 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
14280 # other kt7 entry and the adjacent key capabilities). Removed EE which is
14281 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
14282 # but we can't figure out what.
14283 kt7ix|kimtron model kt-7 or 70 in IX mode,
14285 cols#80, it#8, lines#25,
14286 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
14287 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
14288 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14289 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
14290 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
14291 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
14292 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
14293 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14294 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14295 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
14296 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
14297 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
14299 #### Microdata/MDIS
14301 # This was a line of terminals made by McDonnell-Douglas Information Systems.
14302 # These entries come direct from MDIS documentation. I have edited them only
14303 # to move primary names of the form p[0-9] * to aliases, and to comment out
14304 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
14305 # also removed the change history; the last version indicates this is
14306 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
14309 # McDonnell Information Systems Terminal Family History
14310 # =========================================
14312 # Prism-1, Prism-2 and P99:
14313 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
14315 # Prism-4 and Prism-5:
14316 # Slightly less ancient range of Microdata terminals. Follow-on from
14317 # Prism-2, but with many enhancements. P5 has eight display pages.
14320 # A special terminal for use with library systems, primarily in Germany.
14321 # Limited numbers. Similar functionality to P5 (except attributes?).
14323 # Prism-7, Prism-8 and Prism-9:
14324 # More recent range of MDIS terminals, in which P7 and P8
14325 # replace the P4 & P5, with added functionality, and P9 is the flagship.
14326 # The P9 has two emulation modes - P8 and ANSI - and includes a
14327 # large number of the DEC VT220 control sequences. Both
14328 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
14330 # Prism-12 and Prism-14:
14331 # Latest range, functionally very similar to the P9. The P14 has a
14332 # black-on-white overscanning screen.
14334 # The terminfo definitions given here are:
14336 # p2 - Prism-2 (or Prism-1 or P99).
14338 # p4 - Prism-4 (and older P7s & P8s).
14339 # p5 - Prism-5 (or Prism-6).
14342 # p8 - Prism-8 (in national or multinational mode).
14343 # p8-w - 132 column version of p8.
14344 # p9 - Prism-9 in ANSI mode.
14345 # p9-w - 132 column version of p9.
14346 # p9-8 - Prism-9 in Prism-8 emulation mode.
14347 # p9-8-w - As p9-8, but with 132 columns.
14349 # p12 - Prism-12 in ANSI mode.
14350 # p12-w - 132 column version of p12.
14351 # p12-m - Prism-12 in MDC emulation mode.
14352 # p12-m-w - As p12-m, but with 132 columns.
14353 # p14 - Prism-14 in ANSI mode.
14354 # p14-w - 132 column version of p14.
14355 # p14-m - Prism-14 in MDC emulation mode.
14356 # p14-m-w - As p14-m, but with 132 columns.
14361 # Includes Prism-1 and basic P99 without SP or MP loaded.
14362 # The simplest form of Prism-type terminal.
14363 # Basic cursor movement and clearing operations only.
14364 # No video attributes.
14366 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14367 # value up, followed by backspace.
14369 prism2|MDC Prism-2,
14372 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14373 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14374 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
14375 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14376 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
14381 # Includes early versions of P7 & P8.
14382 # Basic family definition for most Prisms (except P2 and P9 ANSI).
14384 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14385 # value up, followed by backspace.
14386 # Cursor key definitions removed because they interfere with vi and csh keys.
14388 prism4|p4|P4|MDC Prism-4,
14389 am, bw, hs, mc5i, msgr,
14390 cols#80, lines#24, wsl#72, xmc#1,
14391 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
14392 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14393 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14394 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
14395 fsl=^]\345, home=^A,
14396 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14397 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
14398 rev=^CD, rmso=^C\s, rmul=^C\s,
14399 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
14400 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
14401 vpa=\013%p1%{32}%+%c,
14406 # Same definition as p4. Includes Prism-6 (not tested!).
14407 # Does not use any multi-page features.
14409 prism5|p5|P5|MDC Prism-5,
14415 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
14417 # Use p4 for very early models of P7.
14418 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14420 prism7|p7|P7|MDC Prism-7,
14421 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
14426 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
14427 # Supports national and multinational character sets.
14429 # Alternate char set operations only work in multinational mode.
14430 # Use p4 for very early models of P8.
14431 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14432 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14434 prism8|p8|P8|MDC Prism-8,
14435 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
14436 vpa=\E[%i%p1%dd, use=p4,
14438 # p8-w: Prism-8 in 132 column mode
14439 # --------------------------------
14441 # 'Wide' version of p8.
14443 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14445 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
14447 is2=\E[<12h\E[<14h, use=p8,
14449 # p9: Prism-9 in ANSI mode
14450 # -------------------------
14452 # The "flagship" model of this generation of terminals.
14453 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
14455 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
14456 # Fixes to deal with terminal firmware bugs:
14457 # . 'ri' uses insert-line since rev index doesn't always
14458 # . 'sgr0' has extra '0' since esc[m fails
14459 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
14460 # Not covered in the current definition:
14462 # . Programming Fn keys
14463 # . Graphic characters (defaults correctly to vt100)
14464 # . Padding values (sets xon)
14465 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14467 prism9|p9|P9|MDC Prism-9 in ANSII mode,
14468 am, bw, hs, mc5i, msgr, xenl, xon,
14469 cols#80, it#8, lines#24, vt#3, wsl#72,
14470 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
14471 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
14472 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14473 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14474 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14475 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
14476 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
14477 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
14478 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
14479 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
14480 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
14481 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
14482 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
14483 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
14484 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
14485 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
14486 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14487 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
14489 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
14490 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14491 tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
14493 # p9-w: Prism-9 in 132 column mode
14494 # --------------------------------
14496 # 'Wide' version of p9.
14498 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
14500 is2=\E[&p\E[<12l\E F\E[<14h,
14501 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
14503 # p9-8: Prism-9 in P8 mode
14504 # ------------------------
14506 # P9 terminal in P8 emulation mode.
14507 # Similar to p8 definition.
14508 # Insertion and deletion operations possible.
14510 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
14511 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14512 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
14514 # p9-8-w: Prism-9 in P8 and 132 column modes
14515 # ------------------------------------------
14517 # P9 terminal in P8 emulation mode and 132 column mode.
14519 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
14520 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14521 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
14523 # p12: Prism-12 in ANSI mode
14524 # ---------------------------
14526 # See p9 definition.
14528 prism12|p12|P12|MDC Prism-12 in ANSI mode,
14531 # p12-w: Prism-12 in 132 column mode
14532 # ----------------------------------
14534 # 'Wide' version of p12.
14536 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
14539 # p12-m: Prism-12 in MDC emulation mode
14540 # -------------------------------------
14542 # P12 terminal in MDC emulation mode.
14543 # Similar to p8 definition.
14544 # Insertion and deletion operations possible.
14546 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
14549 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
14550 # -------------------------------------------------------
14552 # P12 terminal in MDC emulation mode and 132 column mode.
14554 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
14557 # p14: Prism-14 in ANSII mode
14558 # ---------------------------
14560 # See p9 definition.
14562 prism14|p14|P14|MDC Prism-14 in ANSII mode,
14565 # p14-w: Prism-14 in 132 column mode
14566 # ----------------------------------
14568 # 'Wide' version of p14.
14570 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
14573 # p14-m: Prism-14 in MDC emulation mode
14574 # -------------------------------------
14576 # P14 terminal in MDC emulation mode.
14577 # Similar to p8 definition.
14578 # Insertion and deletion operations possible.
14580 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
14583 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
14584 # -------------------------------------------------------
14586 # P14 terminal in MDC emulation mode and 132 column mode.
14588 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
14591 # End of McDonnell Information Systems Prism definitions
14593 # These things were popular in the Pick database community at one time
14594 # From: George Land <georgeland@aol.com> 24 Sep 1996
14595 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
14597 cols#80, lines#24, ma#1, wsl#78, xmc#1,
14598 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
14599 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
14600 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
14601 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
14602 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
14603 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
14604 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14605 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
14606 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
14607 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
14610 #### Microterm (act, mime)
14612 # The mime1 entries refer to the Microterm Mime I or Mime II.
14613 # The default mime is assumed to be in enhanced act iv mode.
14616 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
14617 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
14618 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
14619 # since Sytek insists ^S means xoff.
14620 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
14621 act4|microterm|microterm act iv,
14624 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
14625 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
14626 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
14627 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
14628 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
14630 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
14631 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
14632 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
14633 act5|microterm5|microterm act v,
14634 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
14636 # Mimes using brightness for standout. Half bright is really dim unless
14637 # you turn up the brightness so far that lines show up on the screen.
14638 mime-fb|full bright mime1,
14639 is2=^S\E, rmso=^S, smso=^Y, use=mime,
14640 mime-hb|half bright mime1,
14641 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
14642 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
14643 # the more plausible ":do=^J:" -- esr)
14644 # uc was at one time disabled to get around a curses bug, be wary of it
14645 mime|mime1|mime2|mimei|mimeii|microterm mime1,
14647 cols#80, it#8, lines#24, vt#9,
14648 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
14649 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
14650 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
14651 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
14652 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
14653 # These termcaps (for mime2a) put the terminal in low intensity mode
14654 # since high intensity mode is so obnoxious.
14655 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
14658 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14659 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
14660 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
14661 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
14662 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
14663 smir=\EE, smso=\E\:, smul=\E6,
14664 # This is the preferred mode (but ^X can't be used as a kill character)
14665 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
14667 cols#80, it#8, lines#24,
14668 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14669 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
14670 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
14671 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
14672 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
14673 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
14674 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
14675 mime3a|mime1 emulating 3a,
14677 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
14678 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
14680 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
14682 # Wed Mar 9 18:53:21 1983
14683 # We run our terminals at 2400 baud, so there might be some timing problems at
14684 # higher speeds. The major improvements in this model are the terminal now
14685 # scrolls down and insert mode works without redrawing the rest of the line
14686 # to the right of the cursor. This is done with a bit of a kludge using the
14687 # exit graphics mode to get out of insert, but it does not appear to hurt
14688 # anything when using vi at least. If you have some users using act4s with
14689 # programs that use curses and graphics mode this could be a problem.
14690 mime314|mm314|mime 314,
14693 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
14694 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
14695 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
14696 # Microterm mime 340 from University of Wisconsin
14697 mm340|mime340|mime 340,
14699 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14700 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14701 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
14702 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
14703 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
14704 # This came from University of Wisconsin marked "astro termcap for jooss".
14705 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
14706 # also added <rmam>/<smam> based on the init string -- esr)
14707 mt4520-rv|micro-term 4520 reverse video,
14708 am, hs, msgr, xenl, xon,
14709 cols#80, it#8, lines#24, wsl#80,
14710 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
14711 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14712 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14713 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14714 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14715 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14716 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14717 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14718 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
14719 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14720 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
14721 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
14722 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
14723 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
14724 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
14725 tbc=\E[g, tsl=\E[25;1H,
14727 # Fri Aug 5 08:11:57 1983
14728 # This entry works for the ergo 4000 with the following setups:
14729 # ansi,wraparound,newline disabled, xon/xoff disabled in both
14732 # WARNING!!! There are multiple versions of ERGO 4000 microcode
14733 # Be advised that very early versions DO NOT WORK RIGHT !!
14734 # Microterm does have a ROM exchange program- use it or lose big
14735 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
14736 ergo4000|microterm ergo 4000,
14739 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
14740 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14741 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
14742 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
14743 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
14744 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14745 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
14746 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
14747 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
14748 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
14753 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
14754 # For what happened to that group, see the ADDS section.
14756 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
14759 # The following vendor-supplied termcaps were captured from the Boundless
14760 # Technologies site, 8 March 1998. I removed all-upper-case names that were
14761 # identical, except for case, to lower-case ones. I also uncommented the acsc
14764 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14765 # DEC vt200/300 with color capabilities added.
14766 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14767 colors#8, pairs#64,
14768 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14770 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14771 # DEC vt200/300 with color capabilities added.
14772 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14773 colors#8, pairs#64,
14774 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14775 use=ncr260vt300wan,
14776 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14777 # DEC vt200/300 with color capabilities added.
14778 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
14779 colors#8, pairs#64,
14780 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14782 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
14783 # DEC vt200/300 with color capabilities added.
14784 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
14785 colors#8, pairs#64,
14786 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14787 use=ncr260vt300wpp,
14788 # This definition for ViewPoint supports several attributes. This means
14789 # that it has magic cookies (extra spaces where the attributes begin).
14790 # Some applications do not function well with magic cookies. The System
14791 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
14792 # If supporting various attributes is not vital, 'xmc#1' and the extra
14793 # attributes can be removed.
14794 # Mapping to ASCII character set ('acsc' capability) can also be
14795 # restored if needed.
14796 ncr260vppp|NCR 2900_260 viewpoint,
14797 am, bw, hs, km, mc5i, mir, msgr, xon,
14798 cols#80, lines#24, nlab#32, xmc#1,
14799 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
14800 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
14801 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
14802 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
14803 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
14804 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
14805 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
14806 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14807 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
14808 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
14809 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
14810 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
14811 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
14812 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
14813 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
14814 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
14815 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
14816 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
14817 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
14818 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
14819 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
14820 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
14821 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14822 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
14823 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
14824 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
14826 cup=\Ea%i%p1%dR%p2%dC$<30>,
14827 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14828 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14830 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
14831 am, hs, mir, msgr, xenl, xon,
14832 cols#80, lines#24, nlab#32,
14833 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14834 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14835 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14836 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
14837 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14838 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14839 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14840 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14841 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14842 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
14843 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
14844 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
14845 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
14847 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14848 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14849 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
14850 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
14851 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
14852 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
14853 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14855 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14856 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
14857 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
14858 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
14859 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
14861 cup=\E[%i%p1%d;%p2%dH$<30>,
14862 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14863 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14865 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
14866 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14867 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14868 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14869 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
14870 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
14871 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14872 smkx=\E=, use=ncr260vt100an,
14873 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
14875 cup=\E[%i%p1%d;%p2%dH$<30>,
14876 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14877 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14879 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
14880 am, hs, mir, msgr, xenl, xon,
14881 cols#80, lines#24, nlab#32,
14882 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14883 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14884 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14885 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
14886 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14887 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14888 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14889 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14890 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14891 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
14892 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
14893 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
14894 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
14895 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14896 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14897 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
14898 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
14899 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
14900 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
14901 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
14902 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
14903 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
14904 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
14905 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
14906 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
14907 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
14908 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
14909 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
14910 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14912 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14913 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
14914 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14915 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
14917 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
14919 cup=\E[%i%p1%d;%p2%dH$<30>,
14920 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
14921 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
14923 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
14924 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14925 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14926 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14927 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
14929 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
14931 cup=\E[%i%p1%d;%p2%dH$<30>,
14932 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14933 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14935 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
14936 am, hs, mir, msgr, xenl, xon,
14937 cols#80, lines#24, nlab#32,
14938 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14939 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14940 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14941 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
14942 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14943 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14944 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14945 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14946 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14947 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
14948 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
14949 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
14950 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
14951 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14952 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14953 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
14954 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
14955 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
14956 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
14957 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
14958 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
14959 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
14960 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
14961 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14962 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
14963 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
14964 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
14966 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14968 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14969 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
14970 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14971 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
14973 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
14975 cup=\E[%i%p1%d;%p2%dH$<30>,
14976 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
14977 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
14979 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
14980 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14981 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14982 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14983 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
14985 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
14987 cup=\E[%i%p1%d;%p2%dH$<30>,
14988 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14989 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14991 # This terminfo file contains color capabilities for the Wyse325 emulation of
14992 # the NCR 2900/260C color terminal. Because of the structure of the command
14993 # (escape sequence) used to set color attributes, one of the fore/background
14994 # colors must be preset to a given value. I have set the background color to
14995 # black. The user can change this setup by altering the last section of the
14996 # 'setf' definition. The escape sequence to set color attributes is
14997 # ESC d y <foreground_color> <background_color> 1
14998 # In addition, the background color can be changed through the desk accessories.
14999 # The capablitiy 'op' sets colors to green on black (default combination).
15001 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15002 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15003 # capability and recompile if you wish to have it included.
15005 ncr260wy325pp|NCR 2900_260 wyse 325,
15006 am, bw, hs, km, mc5i, mir, msgr, xon,
15007 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15008 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15009 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15010 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15011 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15012 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15013 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15014 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15015 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15016 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15017 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15018 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15019 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15020 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15021 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15022 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15023 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15024 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15025 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15026 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15027 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15028 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15029 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15030 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15032 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15033 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15034 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15036 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15038 cup=\Ea%i%p1%dR%p2%dC$<30>,
15039 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15040 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15042 # This definition for Wyse 350 supports several attributes. This means
15043 # that it has magic cookies (extra spaces where the attributes begin).
15044 # Some applications do not function well with magic cookies. The System
15045 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15046 # If supporting various attributes is not vital, 'xmc#1' and the extra
15047 # attributes can be removed.
15048 # Mapping to ASCII character set ('acsc' capability) can also be
15049 # restored if needed.
15050 # In addition, color capabilities have been added to this file. The drawback,
15051 # however, is that the background color has to be black. The foreground colors
15052 # are numbered 0 through 15.
15054 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15055 # with the 'pairs' capability defined as below. If you wish to
15056 # have it included, Un-comment it and recompile (using 'tic').
15058 ncr260wy350pp|NCR 2900_260 wyse 350,
15059 am, bw, hs, km, mc5i, mir, msgr, xon,
15060 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15061 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15062 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15063 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15064 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15065 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15066 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15067 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15068 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15069 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15070 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15071 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15072 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15073 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15074 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15075 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15076 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15077 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15078 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15079 mc0=\EP$<10>, mc4=^T, mc5=^R,
15080 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15081 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15082 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15083 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15085 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15086 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15087 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15089 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15091 cup=\Ea%i%p1%dR%p2%dC$<30>,
15092 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15093 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15095 # This definition for Wyse 50+ supports several attributes. This means
15096 # that it has magic cookies (extra spaces where the attributes begin).
15097 # Some applications do not function well with magic cookies. The System
15098 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15099 # If supporting various attributes is not vital, 'xmc#1' and the extra
15100 # attributes can be removed.
15101 # Mapping to ASCII character set ('acsc' capability) can also be
15102 # restored if needed.
15103 # (ncr260wy50+pp: originally contained commented-out
15104 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15105 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15106 am, bw, hs, km, mc5i, mir, msgr, xon,
15107 cols#80, lines#24, nlab#32, xmc#1,
15108 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15109 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15110 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15111 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15112 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15113 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15114 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15116 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15117 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15118 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15119 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15120 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15121 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15122 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15123 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15124 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15125 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15126 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15127 mc0=\EP$<10>, mc4=^T, mc5=^R,
15128 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15129 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15130 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15131 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15132 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15133 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15134 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15136 cup=\Ea%i%p1%dR%p2%dC$<30>,
15137 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15138 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15140 ncr260wy60pp|NCR 2900_260 wyse 60,
15141 am, bw, hs, km, mc5i, mir, msgr, xon,
15142 cols#80, lines#24, nlab#32,
15143 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15144 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15145 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15146 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15147 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15148 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15149 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15151 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15152 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15153 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15154 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15155 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15156 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15157 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15158 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15159 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15160 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15161 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15162 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15163 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15164 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15165 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15166 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15167 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15168 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15170 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15172 cup=\Ea%i%p1%dR%p2%dC$<30>,
15173 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15174 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15176 ncr160vppp|NCR 2900_160 viewpoint,
15178 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15180 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15182 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15184 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15185 use=ncr260vt100wan,
15186 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15187 use=ncr260vt100wpp,
15188 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15190 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15192 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15193 use=ncr260vt200wan,
15194 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15195 use=ncr260vt200wpp,
15196 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15198 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15200 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15201 use=ncr260vt300wan,
15202 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15203 use=ncr260vt300wpp,
15204 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15206 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15207 use=ncr260wy50+wpp,
15208 ncr160wy60pp|NCR 2900_160 wyse 60,
15210 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15212 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15213 am, hs, mc5i, mir, msgr, xon,
15214 cols#80, it#8, lines#24, nlab#32,
15215 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15216 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15217 clear=\E[2J\E[1;1H$<300>, cr=^M,
15218 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15219 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15220 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15221 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15222 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15223 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15224 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15225 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15226 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15228 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15229 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15230 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15231 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15232 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15233 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15234 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15236 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15237 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15238 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15240 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15242 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15243 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15246 # Vendor-supplied NCR termcaps end here
15248 # NCR7900 DIP switches:
15252 # 5 - Parity (Odd/Even)
15253 # 6 - Don't Send or Do Send Spaces
15254 # 7 - Parity Enable
15255 # 8 - Stop Bits (One/Two)
15258 # 1 - Upper/Lower Shift
15259 # 2 - Typewriter Shift
15260 # 3 - Half Duplex / Full Duplex
15261 # 4 - Light/Dark Background
15262 # 5-6 - Carriage Return Without / With Line Feed
15263 # 7 - Extended Mode
15264 # 8 - Suppress Keyboard Display
15267 # 1 - End of line entry disabled/enabled
15268 # 2 - Conversational mode / (Local?) Mode
15269 # 3 - Control characters displayed / not displayed
15270 # 4 - (2-wire?) / 4-wire communications
15271 # 5 - RTS on and off for each character
15272 # 6 - (50Hz?) / 60 Hz
15273 # 7 - Exit after level zero diagnostics
15274 # 8 - RS-232 interface
15277 # 1 - Reverse Channel (yes / no)
15278 # 2 - Manual answer (no / yes)
15279 # 3-4 - Cursor appearance
15280 # 5 - Communication Rate
15281 # 6 - Enable / Disable EXT turnoff
15282 # 7 - Enable / Disable CR turnoff
15283 # 8 - Enable / Disable backspace
15285 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
15286 # reverse, blink, dim, and underline) the appropriate number of bits (by
15287 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
15288 # '@' is (effectively) "or"ed with each attribute to generate the proper third
15289 # character in the <ESC>0 sequence. The <sgr> string implements the following
15292 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
15293 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
15295 # Where: P1 <==> Standout attribute parameter
15296 # P2 <==> Underline attribute parameter
15297 # P3 <==> Reverse attribute parameter
15298 # P4 <==> Blink attribute parameter
15299 # P5 <==> Dim attribute parameter
15300 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
15301 ncr7900i|ncr7900|ncr 7900 model 1,
15303 cols#80, lines#24, xmc#1,
15304 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15305 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
15306 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
15307 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
15309 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
15310 sgr0=\E0@, smso=\E0Q, smul=\E0`,
15311 ncr7900iv|ncr 7900 model 4,
15314 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
15315 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
15316 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
15317 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
15318 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15319 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
15320 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
15321 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
15322 # The user can enter a CTRL-B to get out of this locked state.
15323 # In <hpa>, we want to output the character given by the formula:
15324 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
15325 ncr7901|ncr 7901 model,
15328 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
15329 cub1=^H, cud1=^J, cuf1=^F,
15330 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
15332 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
15333 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
15334 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
15335 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
15336 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
15337 vpa=\013%p1%{64}%+%c,
15339 # Newbury Data Recording Limited (Newbury Data)
15341 # Have been manufacturing and reselling various peripherals for a long time
15342 # They don't make terminals anymore, but are still in business (in 2007).
15343 # Their e-mail address is at ndsales@newburydata.co.uk
15344 # and their post address is:
15346 # Newbury Data Recording Ltd,
15347 # Premier Park, Road One,
15348 # Winsford, Cheshire, CW7 3PT
15350 # Their technical support is still good, they sent me for free a printed copy
15351 # of the 9500 user manual and I got it just 1 week after I first contacted them
15355 # Manufactured in the early/mid eighties, behaves almost the same as a
15356 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
15357 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
15358 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
15359 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
15360 # recognized: if you type in "ESC !", the next (third) character is not
15361 # echoed, showing that the terminal was actually waiting for a parameter!
15362 ndr9500|nd9500|Newbury Data 9500,
15363 am, bw, hs, mc5i, mir, msgr, ul, xon,
15364 cols#80, lines#24, wsl#79,
15365 acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
15366 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
15367 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15368 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
15369 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
15370 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
15371 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
15372 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
15373 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15374 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
15375 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
15376 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15377 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15378 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
15379 pfloc=\E|%{48}%p1%+%c2%p2\031,
15380 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
15381 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
15382 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
15383 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
15384 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
15386 ndr9500-nl|NDR 9500 with no status line,
15389 dsl@, fsl@, tsl@, use=ndr9500,
15391 ndr9500-25|NDR 9500 with 25th line enabled,
15392 lines#25, use=ndr9500,
15394 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
15395 lines#25, use=ndr9500-nl,
15397 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
15400 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
15401 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
15402 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
15404 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
15405 lines#25, use=ndr9500-mc,
15407 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
15410 dsl@, fsl@, tsl@, use=ndr9500-mc,
15412 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
15413 lines#25, use=ndr9500-mc-nl,
15415 #### Perkin-Elmer (Owl)
15417 # These are official terminfo entries from within Perkin-Elmer.
15420 bantam|pe550|pe6100|perkin elmer 550,
15423 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15424 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15425 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
15426 fox|pe1100|perkin elmer 1100,
15429 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15430 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15431 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
15432 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
15433 owl|pe1200|perkin elmer 1200,
15436 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15437 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15438 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15439 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15440 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
15441 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15442 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15443 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
15444 pe1251|pe6300|pe6312|perkin elmer 1251,
15446 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
15447 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
15448 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15449 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
15450 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
15451 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
15452 # (pe7000m: this had
15453 # rmul=\E!\0, smul=\E!\040,
15454 # which is probably wrong, it collides with kf0
15455 pe7000m|perkin elmer 7000 series monochrome monitor,
15458 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
15459 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15460 ed=\EJ, el=\EI, home=\EH, ind=^J,
15461 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
15462 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
15463 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
15464 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
15466 pe7000c|perkin elmer 7000 series colour monitor,
15467 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
15468 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
15472 # Sperry Univac has merged with Burroughs to form Unisys.
15475 # This entry is for the Sperry UTS30 terminal running the TTY
15476 # utility under control of CP/M Plus 1R1. The functionality
15477 # provided is comparable to the DEC vt100.
15478 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
15479 uts30|sperry uts30 with cp/m@1R1,
15481 cols#80, lines#24, wsl#40,
15482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15483 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
15484 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
15485 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
15486 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
15487 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
15488 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
15489 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
15490 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
15491 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
15492 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
15493 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
15494 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15495 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
15496 smul=\E[4m, tsl=\E], uc=\EPB,
15500 # Tandem builds these things for use with its line of fault-tolerant
15501 # transaction-processing computers. They aren't generally available
15502 # on the merchant market, and so are fairly uncommon.
15505 tandem6510|adm3a repackaged by Tandem,
15508 # A funny series of terminal that TANDEM uses. The actual model numbers
15509 # have a fourth digit after 653 that designates minor variants. These are
15510 # natively block-mode and rather ugly, but they have a character mode which
15511 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
15512 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
15513 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
15514 tandem653|t653x|Tandem 653x multipage terminal,
15515 OTbs, am, da, db, hs,
15516 cols#80, lines#24, wsl#64, xmc#1,
15517 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
15518 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
15519 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
15520 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
15522 #### Tandy/Radio Shack
15524 # Tandy has a line of VDTs distinct from its microcomputers.
15527 dmterm|deskmate terminal,
15530 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
15531 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15532 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
15533 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
15534 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
15535 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
15536 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
15537 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
15539 dt100|dt-100|Tandy DT-100 terminal,
15541 cols#80, lines#24, xmc#1,
15542 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15543 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15544 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
15545 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
15546 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
15547 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
15548 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
15549 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
15550 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
15551 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
15552 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
15553 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
15554 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
15555 cols#132, use=dt100,
15556 dt110|Tandy DT-110 emulating ansi,
15559 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15560 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15561 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
15562 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
15563 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
15564 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
15565 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
15566 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
15567 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
15568 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
15569 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
15570 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15571 smacs=^N, smso=\E[7m, smul=\E[4m,
15572 pt210|TRS-80 PT-210 printing terminal,
15575 bel=^G, cr=^M, cud1=^J, ind=^J,
15577 #### Tektronix (tek)
15579 # Tektronix tubes are graphics terminals. Most of them use modified
15580 # oscilloscope technology incorporating a long-persistence green phosphor,
15581 # and support vector graphics on a main screen with an attached "dialogue
15582 # area" for interactive text.
15585 tek|tek4012|tektronix 4012,
15588 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
15589 ff=\014$<1000>, is2=\E^O,
15590 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15591 tek4013|tektronix 4013,
15592 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
15593 tek4014|tektronix 4014,
15595 is2=\E\017\E9, use=tek4012,
15596 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15597 tek4015|tektronix 4015,
15598 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
15599 tek4014-sm|tektronix 4014 in small font,
15600 cols#121, lines#58,
15601 is2=\E\017\E\:, use=tek4014,
15602 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15603 tek4015-sm|tektronix 4015 in small font,
15604 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
15605 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
15607 # You need to have "stty nl2" in effect. Some versions of tset(1) know
15608 # how to set it for you.
15610 # It's got the Magic Cookie problem around stand-out mode. If you can't
15611 # live with Magic Cookie, remove the :so: and :se: fields and do without
15612 # reverse video. If you like reverse video stand-out mode but don't want
15613 # it to flash, change the letter 'H' to 'P' in the :so: field.
15614 tek4023|tektronix 4023,
15616 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
15617 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
15618 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
15619 rmso=^_@, smso=^_P,
15620 # It is recommended that you run the 4025 at 4800 baud or less;
15621 # various bugs in the terminal appear at 9600. It wedges at the
15622 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
15623 # on keyboard don't work. You have to hit BREAK twice to get
15624 # one break at any speed - this is a documented feature.
15625 # Can't use cursor motion because it's memory relative, and
15626 # because it only works in the workspace, not the monitor.
15627 # Same for home. Likewise, standout only works in the workspace.
15629 # <el> was commented out since vi and rogue seem to work better
15630 # simulating it with lots of spaces!
15632 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
15633 # and didn't seem necessary.
15635 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
15637 cols#80, it#8, lines#34, lm#0,
15638 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
15639 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
15640 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
15641 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
15642 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
15643 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
15644 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
15646 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15647 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
15648 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
15649 tek4025-17|tek 4025 17 line window,
15650 lines#17, use=tek4025,
15651 tek4025-17-ws|tek 4025 17 line window in workspace,
15652 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
15653 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
15654 smso=\037att e\r, use=tek4025-17,
15655 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
15656 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
15657 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15659 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
15660 # The following status modes are assumed for normal operation (replace the
15661 # initial "!" by whatever the current command character is):
15662 # !COM 29 # NOTE: changes command character to GS (^])
15668 # ^]STO 9 17 25 33 41 49 57 65 73
15669 # Other modes may be set according to communication requirements.
15670 # If the command character is inadvertently changed, termcap can't restore it.
15671 # Insert-character cannot be made to work on both top and bottom rows.
15672 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
15673 # There also seems to be a problem with vertical motion, perhaps involving
15674 # delete/insert-line, following a typed carriage return. This terminal sucks.
15675 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15676 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
15677 # work any more. -- esr)
15678 tek4025a|Tektronix 4025A,
15679 OTbs, OTpt, am, bw, da, db, xon,
15680 cols#80, it#8, lines#34,
15681 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
15682 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
15683 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
15684 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
15685 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
15686 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
15687 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
15688 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
15690 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
15691 # Here's the command file that I use to get rogue to work on the 4025.
15692 # It should work with any program using the old curses (e.g. it better
15693 # not try to scroll, or cursor addressing won't work. Also, you can't
15695 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
15696 tek4025-cr|tek 4025 for curses and rogue,
15698 cols#80, it#8, lines#33,
15699 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
15700 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
15701 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15702 rmcup=\037wor 0, smcup=\037wor 33h,
15703 # next two lines commented out since curses only allows 128 chars, sigh.
15704 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
15705 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
15706 tek4025ex|4025ex|4027ex|tek 4025 w/!,
15707 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
15708 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15709 tek4105|tektronix 4105,
15710 OTbs, am, mir, msgr, ul, xenl, xt,
15711 cols#79, it#8, lines#29,
15712 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
15713 clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
15714 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
15715 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15716 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
15717 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
15718 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
15719 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
15720 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
15721 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
15722 smul=\E[=5;<2m, tbc=\E[1g,
15724 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
15725 tek4105-30|4015 emulating 30 line vt100,
15726 am, mir, msgr, xenl, xon,
15727 cols#80, it#8, lines#30, vt#3,
15728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15729 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15730 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15731 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15732 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15733 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15734 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
15735 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
15736 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
15737 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15738 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15739 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15740 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
15741 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15742 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15745 # Tektronix 4105 from BRL
15746 # The following setup modes are assumed for normal operation:
15747 # CODE ansi CRLF no DABUFFER 141
15748 # DAENABLE yes DALINES 30 DAMODE replace
15749 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
15750 # FLAGGING input INSERTREPLACE replace LFCR no
15751 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
15752 # SELECTCHARSET G1 0 TABS -2
15753 # Other setup modes may be set for operator convenience or communication
15754 # requirements; I recommend
15755 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15756 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15757 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15758 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
15759 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15760 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
15762 # and factory color maps. After setting these modes, save them with NVSAVE. No
15763 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15764 # "IC" cannot be used in combination with "im" & "ei".
15765 # "tek4105a" is just a guess:
15766 tek4105a|Tektronix 4105,
15767 OTbs, OTpt, msgr, xon,
15768 OTkn#8, cols#80, it#8, lines#30, vt#3,
15769 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15770 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15771 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15772 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15773 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15774 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15775 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15776 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15777 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15778 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15779 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15780 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15781 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15782 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15783 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15784 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15785 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15786 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15789 # Tektronix 4106/4107/4109 from BRL
15790 # The following setup modes are assumed for normal operation:
15791 # CODE ansi COLUMNMODE 80 CRLF no
15792 # DABUFFER 141 DAENABLE yes DALINES 32
15793 # DAMODE replace DAVISIBILITY yes ECHO no
15794 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
15795 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
15796 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
15798 # Other setup modes may be set for operator convenience or communication
15799 # requirements; I recommend
15800 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15801 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15802 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15803 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
15804 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15805 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
15807 # and factory color maps. After setting these modes, save them with NVSAVE. No
15808 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15809 # "IC" cannot be used in combination with "im" & "ei".
15810 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
15812 cols#80, it#8, lines#32, vt#3,
15813 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15814 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15815 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15816 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15817 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15818 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15819 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15820 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15821 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15822 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15823 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15824 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15825 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15826 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15827 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15828 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15829 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15830 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
15832 tek4107|tek4109|tektronix terminals 4107 4109,
15833 OTbs, am, mir, msgr, ul, xenl, xt,
15834 cols#79, it#8, lines#29,
15835 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
15836 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
15837 cub1=^H, cud1=^J, cuf1=\EC,
15838 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
15839 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
15840 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15841 rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
15842 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
15843 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
15844 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
15845 smul=\E%!1\E[4m$<2>\E%!0,
15846 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
15847 # see the note attached to tek4207.
15848 tek4207-s|Tektronix 4207 with sysline but no memory,
15850 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
15851 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
15852 is2=\E7\E[?6l\E[2K\E[?6h\E8,
15853 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
15855 # The 4110 series may be a wonderful graphics series, but they make the 4025
15856 # look good for screen editing. In the dialog area, you can't move the cursor
15857 # off the bottom line. Out of the dialog area, ^K moves it up, but there
15858 # is no way to scroll.
15860 # Note that there is a floppy for free from Tek that makes the
15861 # 4112 emulate the vt52 (use the vt52 termcap). There is also
15862 # an expected enhancement that will use ANSI standard sequences.
15864 # 4112 in non-dialog area pretending to scroll. It really wraps
15865 # but vi is said to work (more or less) in this mode.
15867 # 'vi' works reasonably well with this entry.
15869 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
15872 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
15873 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
15874 # The 4112 with the ANSI compatibility enhancement
15875 tek4112|tek4114|tektronix 4110 series,
15878 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
15879 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
15880 ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
15881 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
15882 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15883 tek4112-nd|4112 not in dialog area,
15885 cuu1=^K, use=tek4112,
15886 tek4112-5|4112 in 5 line dialog area,
15887 lines#5, use=tek4112,
15888 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
15889 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
15890 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
15891 # previously \0410 and \0411 sequences...I don't *think* they were supposed
15892 # to be 4-digit octal -- esr)
15893 tek4113|tektronix 4113 color graphics with 5 line dialog area,
15896 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
15897 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
15898 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
15899 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
15901 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
15902 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
15903 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
15904 # :vb: needs enough delay to let you see the background color being toggled.
15905 tek4113-nd|tektronix 4113 color graphics with no dialog area,
15907 cols#80, it#8, lines#34,
15908 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
15910 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
15911 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
15912 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
15913 # This entry is from Tek. Inc. (Brian Biehl)
15914 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
15915 otek4115|Tektronix 4115,
15916 OTbs, am, da, db, eo,
15917 cols#80, it#8, lines#34,
15918 cbt=\E[Z, clear=\E[H\E[2J,
15919 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
15920 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15921 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
15922 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
15924 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
15925 kbs=^H, ri=\EM, rmam=\E[?7l,
15926 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
15927 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
15928 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
15930 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
15933 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
15934 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15935 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15936 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
15937 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
15938 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
15939 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
15940 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
15941 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
15942 rmso=\E[m, rmul=\E[m,
15943 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
15944 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
15945 vpa=\E[%p1%{1}%+%dd,
15946 # The tek4125 emulates a vt100 incorrectly - the scrolling region
15947 # command is ignored. The following entry replaces <csr> with the needed
15948 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
15949 # chokes on; and adds a lot of initialization for the tek dialog area.
15950 # Note that this entry uses all 34 lines and sets the cursor color to green.
15951 # Steve Jacobson 8/85
15952 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
15953 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
15954 tek4125|tektronix 4125,
15956 csr@, dl1=\E[1M, il1=\E[1L,
15957 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15958 rc@, sc@, smkx=\E=, use=vt100,
15960 # From: <jcoker@ucbic>
15961 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
15962 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
15963 # note that if jcoker wasn't confused you may be able to use this one.
15964 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
15965 tek4207|Tektronix 4207 graphics terminal with memory,
15966 am, bw, mir, msgr, ul, xenl,
15967 cols#80, it#8, lines#32,
15968 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
15969 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15970 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
15971 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
15972 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
15973 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
15974 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
15975 rev=\E[7m, ri=\E[T,
15976 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
15977 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
15978 smul=\E[4m, tbc=\E[1g,
15980 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
15981 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
15982 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
15983 tek4404|tektronix 4404,
15985 cols#80, it#8, lines#32,
15986 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
15987 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
15988 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
15989 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
15990 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
15991 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
15992 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
15993 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
15994 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
15995 # Some unknown person wrote:
15996 # I added the is string - straight Unix has ESC ; in the login
15997 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
15998 # mode). The is string here cleans up a few things (but not
16000 ct8500|tektronix ct8500,
16003 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16004 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16005 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16006 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16007 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16009 # Tektronix 4205 terminal.
16011 # am is not defined because the wrap around occurs not when the char.
16012 # is placed in the 80'th column, but when we are attempting to type
16013 # the 81'st character on the line. (esr: hmm, this is like the vt100
16014 # version of xenl, perhaps am + xenl would work!)
16016 # Bold, dim, and standout are simulated by colors and thus not allowed
16017 # with colors. The tektronix color table is mapped into the RGB color
16018 # table by setf/setb. All colors are reset to factory specifications by oc.
16019 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16020 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16021 # interval then maps into pre-defined value.
16022 tek4205|tektronix 4205,
16024 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16025 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16026 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16027 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16028 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16029 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16030 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
16031 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
16032 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
16033 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16034 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16035 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16036 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16038 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16039 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16040 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16041 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16042 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16043 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16044 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16045 smul=\E[4m, tbc=\E[1g,
16047 #### Teletype (tty)
16049 # These are the hardcopy Teletypes from before AT&T bought the company,
16050 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16051 # pulpy yellow roll paper. If you remember these you go back a ways.
16052 # Teletype-branded VDTs are listed in the AT&T section.
16054 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16055 # other programs still default to emitting codes for the Model 37.
16058 tty33|tty35|model 33 or 35 teletype,
16061 bel=^G, cr=^M, cud1=^J, ind=^J,
16062 tty37|model 37 teletype,
16064 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16067 # There are known to be at least three flavors of the tty40, all seem more
16068 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16069 # awful braindamage, such as printing a visible newline indicator after each
16070 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16071 # braindamaged but has hope and is described here. The 40-4 is a 3270
16072 # lookalike and beyond hope. The terminal has visible bell but I don't know
16073 # it - it's null here to prevent it from showing the BL character.
16074 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16075 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16076 # to get crlf, even if <cr> is not ^M.)
16077 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16078 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16081 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16082 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16083 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16084 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16085 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16086 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16087 tty43|model 43 teletype,
16088 OTbs, am, hc, os, xon,
16090 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16095 # You can add <is2=\E<> to put this 40-column mode, though I can't
16096 # for the life of me think why anyone would want to.
16097 scanset|sc410|sc415|Tymshare Scan Set,
16100 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16101 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16102 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16103 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16104 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16106 #### Volker-Craig (vc)
16108 # If you saw a Byte Magazine cover with a terminal on it during the early
16109 # 1980s, it was probably one of these. Carl Helmers liked them because
16110 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16111 # to program one...)
16114 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16115 # every other linefeed.
16116 vc303|vc103|vc203|volker-craig 303,
16119 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16120 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16121 kcuu1=^N, ll=\017$<1>W,
16122 vc303a|vc403a|volker-craig 303a,
16123 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16124 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16125 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16126 vc404|volker-craig 404,
16129 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16130 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16131 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16132 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16133 vc404-s|volker-craig 404 w/standout mode,
16134 cud1=^J, rmso=^O, smso=^N, use=vc404,
16135 # From: <wolfgang@cs.sfu.ca>
16136 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16137 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16140 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16141 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16142 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16143 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16144 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16145 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16146 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16147 rmso=\E^_, smso=\E^Y,
16148 vc415|volker-craig 415,
16149 clear=^L, use=vc404,
16151 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16154 #### IBM PC and clones
16157 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16158 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16159 # doesn't support scrolling regions, ignores add line commands, and ignores
16160 # delete line commands. Consequently, the resulting behavior looks like a
16161 # crude adm3a-type terminal.
16162 # Steve Jacobson 8/85
16163 pcplot|pc-plot terminal emulation program,
16165 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16166 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16167 # I've found that my KayPro II, running MDM730, continues to emulate an
16168 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16169 # system the following termcap entry works well:
16170 # I have noticed a couple of minor glitches, but nothing I can't work
16171 # around. (I added two capabilities from the BRL entry -- esr)
16172 kaypro|kaypro2|kaypro II,
16175 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16176 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16177 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16179 # From IBM, Thu May 5 19:35:27 1983
16180 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16181 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16184 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16185 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16187 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16188 OTbs, am, bw, eo, hs, km, msgr, ul,
16189 cols#80, it#8, lines#24,
16190 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16191 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16192 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16193 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16194 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16195 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16196 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16197 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16198 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16199 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16200 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16201 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16202 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16203 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
16204 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16208 # Apple II firmware console first, then various 80-column cards and
16209 # terminal emulators. For two cents I'd toss all these in the UFO file
16210 # along with the 40-column apple entries.
16213 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16214 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16215 # function of TIC, not the firmware.
16216 # The clear key on a IIgs will do something like clear-screen,
16217 # depending on what you're in.
16218 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16219 OTbs, am, bw, eo, msgr,
16220 cols#80, it#8, lines#24,
16221 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16222 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16223 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16224 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16226 # Apple //e with 80-column card, entry from BRL
16227 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16228 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16229 # Auto-wrap does not work right due to newline scrolling delay, which also
16230 # requires that you set "stty cr2".
16231 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16232 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16233 # using a terminal emulation program instead of the built-in firmware.
16237 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16238 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16239 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16240 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16242 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16243 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16244 apple2e-p|Apple //e via Pascal,
16245 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16246 kcud1=^J, use=apple2e,
16247 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16248 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16249 apple-ae|ASCII Express,
16250 OTbs, am, bw, msgr, nxon, xon,
16251 cols#80, it#8, lines#24,
16252 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16253 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16254 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16255 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16257 appleII|apple ii plus,
16259 cols#80, it#8, lines#24,
16260 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16261 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16262 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16263 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16265 # Originally by Gary Ford 21NOV83
16266 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16267 apple-80|apple II with smarterm 80 col,
16270 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
16271 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
16272 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
16273 apple-soroc|apple emulating soroc 120,
16276 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16277 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
16278 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16279 # From Peter Harrison, Computer Graphics Lab, San Francisco
16280 # ucbvax!ucsfmis!harrison .....uucp
16281 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
16282 # "These two work. If you don't have the inverse video chip for the
16283 # Apple with videx then remove the :so: and :se: fields."
16284 # (apple-videx: this used to be called DaleApple -- esr)
16285 apple-videx|Apple with videx videoterm 80 column board with inverse video,
16287 cols#80, it#8, lines#24,
16288 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
16289 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16290 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
16291 rmso=^Z2, sgr0=^Z2, smso=^Z3,
16292 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
16293 # Apple Cat ][ 212 modem, + more all
16294 # controlled by ASCII Express: Pro.
16295 # From Dave Shaver <isucs1!shaver>
16296 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
16299 acsc=, clear=^L, cuf1=^\,
16300 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16301 flash=^W35^W06, home=^Y,
16302 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
16304 apple-uterm|Ultraterm for Apple micros,
16307 acsc=, clear=^L, cuf1=^\,
16308 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16309 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
16310 # from trwrba!bwong (Bradley W. Wong):
16312 # This entry assumes that you are using an apple with the UCSD Pascal
16313 # language card. SYSTEM.MISCINFO is assumed to be the same as that
16314 # supplied with the standard apple except that screenwidth should be set
16315 # using SETUP to 80 columns. Note that the right arrow in not mapped in
16316 # this termcap entry. This is because that key, on the Apple, transmits
16317 # a ^U and would thus preempt the more useful "up" function of vi.
16320 apple80p|80-column apple with Pascal card,
16323 clear=^Y^L, cuf1=^\\:,
16324 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16327 # Apple II+ equipped with Videx 80 column card
16329 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
16330 # manually converted by D A Gwyn
16332 # DO NOT use any terminal emulation with this data base, it works directly
16333 # with the Videx card. This has been tested with vi 1200 baud and works fine.
16335 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
16336 # 1 screen, while in R2 ^U doesn't.
16337 # For inverse alternate character set add:
16338 # <smacs>=^O:<rmacs>=^N:
16339 # (apple-v: added it#8 -- esr)
16340 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
16342 cols#80, it#8, lines#24,
16343 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
16344 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
16345 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
16346 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
16347 khome=^Y, rmso=^Z2, smso=^Z3,
16348 apple-videx3|vapple|Apple II with 80 col card,
16351 clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16352 cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16353 kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
16354 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
16355 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
16356 aepro|Apple II+ running ASCII Express Pro--vt52,
16359 clear=\014$<300/>, cuf1=\EC,
16360 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16362 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
16363 apple-vm80|ap-vm80|apple with viewmax-80,
16366 clear=\014$<300/>, cuf1=^\\:,
16367 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
16368 ed=\013$<300/>, el=^], home=\031$<200/>,
16370 #### Apple Lisa & Macintosh
16373 # (lisa: changed <cvvis> to <cnorm> -- esr)
16374 lisa|apple lisa console display (black on white),
16375 OTbs, am, eo, msgr,
16376 cols#88, it#8, lines#32,
16377 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
16378 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
16379 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16380 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
16381 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16382 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
16383 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
16384 liswb|apple lisa console display (white on black),
16385 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
16386 smso=\E[m, smul=\E[4m, use=lisa,
16388 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
16389 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
16391 # These entries assume that the 'Auto Wraparound' is enabled.
16392 # Xon-Xoff flow control should also be enabled.
16394 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
16395 # settings are in non-volatile memory and don't need to be reset upon login.
16396 # Also setting the number of columns glitches the screen annoyingly.
16397 # You can type "reset" to get them set.
16399 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
16400 OTbs, OTpt, am, xenl, xon,
16401 OTkn#4, cols#80, it#8, lines#24, vt#3,
16402 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
16403 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16404 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16405 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
16406 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
16407 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
16408 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
16409 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16410 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
16411 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16413 # Lisaterm in 132 column ("wide") mode.
16414 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
16416 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
16417 # Although MacTerminal has insert/delete line, it is commented out here
16418 # since it is much faster and cleaner to use the "lock scrolling region"
16419 # method of inserting and deleting lines due to the MacTerminal implementation.
16420 # Also, the "Insert/delete ch" strings have an extra character appended to them
16421 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
16422 # supported by MacTerminal.
16423 mac|macintosh|Macintosh with MacTerminal,
16426 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
16427 # Lisaterm in 132 column ("wide") mode.
16428 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
16431 # The AppKit Terminal.app descriptions all have names beginning with
16432 # "nsterm". Note that the statusline (-s) versions use the window
16433 # titlebar as a phony status line, and may produce warnings during
16434 # compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
16435 # these warnings, or even ignore these entries entirely. Apps which
16436 # need to position the cursor or do other fancy stuff inside the status
16437 # line won't work with these entries. They're primarily useful for
16438 # programs like Pine which provide simple notifications in the status
16439 # line. Please note that non-ASCII characters don't work right in the
16440 # status line, since Terminal.app incorrectly interprets their Unicode
16441 # codepoints as MacRoman codepoints.
16443 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
16444 # "nsterm" to comply with the name length and case conventions and
16445 # limitations of various software packages [notably Solaris terminfo
16446 # and UNIX.] A single Apple_Terminal alias is retained for
16447 # backwards-compatbility.
16449 # * Added function key support (F1-F4). These only work in Terminal.app
16450 # version 51, hopefully the capabilities won't cause problems for people
16451 # using version 41.
16453 # * Added "full color" (-c) entries which support the 16-color mode in
16456 # * By default, version 51 uses UTF-8 encoding with broken altcharset
16457 # support, so "ASCII" (-7) entries without altcharset support were
16460 # nsterm - AppKit Terminal.app
16462 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
16463 # Terminal.app. It is a partial VT100 emulation with some xterm-like
16464 # extensions. This terminfo was written to describe versions 41
16465 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
16466 # version 10.1) of Terminal.app.
16468 # Terminal.app runs under the Mac OS X Quartz windowing system (and
16469 # other AppKit-supported windowing systems.) On the Mac OS X machine I
16470 # use, the executable for Terminal.app is:
16471 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
16473 # If you're looking for a description of the full-screen system
16474 # console which runs under Apple's Darwin operating system on PowerPC
16475 # platforms, see the "xnuppc" entry instead.
16477 # There were no function keys in version 41. In version 51, there are
16478 # four working function keys (F1, F2, F3 and F4.) The function keys
16479 # are included in all of these entries.
16481 # It does not support mouse pointer position reporting. Under some
16482 # circumstances the cursor can be positioned using option-click; this
16483 # works by comparing the cursor position and the selected position,
16484 # and simulating enough cursor-key presses to move the cursor to the
16485 # selected position. This technique fails in all but the simplest
16488 # It provides partial ANSI color support (background colors interacted
16489 # badly with bold in version 41, though, as reflected in :ncv:.) The
16490 # monochrome (-m) entries are useful if you've disabled color support
16491 # or use a monochrome monitor. The full color (-c) entries are useful
16492 # in version 51, which doesn't exhibit the background color bug. They
16493 # also enable an xterm-compatible 16-color mode.
16495 # The configurable titlebar is set using xterm-compatible sequences;
16496 # it is used as a status bar in the statusline (-s) entries. Its width
16497 # depends on font sizes and window sizes, but 50 characters seems to
16498 # be the default for an 80x24 window.
16500 # The MacRoman character encoding is used for some of the alternate
16501 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
16502 # disable alternate character set support entirely, and the "VT100"
16503 # (-acs) entries rely instead on Terminal.app's own buggy VT100
16504 # graphics emulation, which seems to think the character encoding is
16505 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
16506 # are useful in Terminal.app version 51, which supports UTF-8 and
16507 # other ASCII-compatible character encodings but does not correctly
16508 # implement VT100 graphics; once VT100 graphics are correctly
16509 # implemented in Terminal.app, the "VT100" (-acs) entries should be
16510 # usable in any ASCII-compatible character encoding [except perhaps
16511 # in UTF-8, where some experts argue for disallowing alternate
16512 # characters entirely.]
16514 # Terminal.app reports "vt100" as the terminal type, but exports
16515 # several environment variables which may aid detection in a shell
16516 # profile (i.e. .profile or .login):
16519 # TERM_PROGRAM=Apple_Terminal
16520 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
16521 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
16523 # For example, the following Bourne shell script would detect the
16524 # correct terminal type:
16526 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
16529 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
16533 # TERM="nsterm-c-7"
16537 # In a C shell derivative, this would be accomplished by:
16539 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
16540 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
16541 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
16542 # setenv TERM "nsterm"
16544 # setenv TERM "nsterm-c-7"
16549 # The '+' entries are building blocks
16550 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
16551 am, bw, msgr, xenl, xon,
16552 cols#80, it#8, lines#24,
16553 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16554 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16555 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16556 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16557 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
16558 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16559 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16560 kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
16561 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16562 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16563 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
16564 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16565 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
16567 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
16568 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16569 enacs=\E(B\E)0, rmacs=^O,
16570 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16571 smacs=^N, use=nsterm+7,
16573 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
16574 acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
16575 enacs=\E(B\E)0, rmacs=^O,
16576 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16577 smacs=^N, use=nsterm+7,
16579 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
16582 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
16584 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
16585 op=\E[0m, use=ibm+16color,
16587 nsterm+c41|AppKit Terminal.app v41 color support,
16588 colors#8, ncv#37, pairs#64,
16589 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16591 # These are different combinations of the building blocks
16593 # ASCII charset (-7)
16594 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
16597 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
16598 use=nsterm+s, use=nsterm+7,
16600 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
16601 use=nsterm+c41, use=nsterm+7,
16603 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
16604 use=nsterm+c, use=nsterm+7,
16606 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
16607 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
16609 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
16610 use=nsterm+s, use=nsterm+c, use=nsterm+7,
16612 # VT100 alternate-charset (-acs)
16613 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
16616 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
16617 use=nsterm+s, use=nsterm+acs,
16619 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
16620 use=nsterm+c41, use=nsterm+acs,
16622 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
16623 use=nsterm+c, use=nsterm+acs,
16625 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
16626 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
16628 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
16629 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
16632 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
16635 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
16636 use=nsterm+s, use=nsterm+mac,
16638 nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
16639 use=nsterm+c41, use=nsterm+mac,
16641 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
16642 use=nsterm+c, use=nsterm+mac,
16644 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
16645 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
16647 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
16648 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
16651 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
16652 # and D P Schreber comparing to nsterm-c-s-acs.
16654 # D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
16655 # defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
16656 # and that it is not set in Terminal's preferences dialog.
16657 nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
16658 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
16659 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16660 knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
16662 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
16664 # On PowerPC platforms, Apple's Darwin operating system uses a
16665 # full-screen system console derived from a NetBSD framebuffer
16666 # console. It is an ANSI-style terminal, and is not really VT-100
16669 # Under Mac OS X, this is the system console driver used while in
16670 # single-user mode [reachable by holding down Command-S during the
16671 # boot process] and when logged in using console mode [reachable by
16672 # typing ">console" at the graphical login prompt.]
16674 # If you're looking for a description of the Terminal.app terminal
16675 # emulator which runs under the Mac OS X Quartz windowing system (and
16676 # other AppKit-supported windowing systems,) see the "nsterm"
16679 # NOTE: Under Mac OS X version 10.1, the default login window does not
16680 # prompt for user name, instead requiring an icon to be selected from
16681 # a list of known users. Since the special ">console" login is not in
16682 # this list, you must make one of two changes in the Login Window
16683 # panel of the Login section of System Prefs to make the special
16684 # ">console" login accessible. The first option is to enable 'Show
16685 # "Other User" in list for network users', which will add a special
16686 # "Other..." icon to the graphical login panel. Selecting "Other..."
16687 # will present the regular graphical login prompt. The second option
16688 # is to change the 'Display Login Window as:' setting to 'Name and
16689 # password entry fields', which replaces the login panel with a
16690 # graphical login prompt.
16692 # There are no function keys, at least not in Darwin 1.3.
16694 # It has no mouse support.
16696 # It has full ANSI color support, and color combines correctly with
16697 # all three supported attributes: bold, inverse-video and underline.
16698 # However, bold colored text is almost unreadable (bolding is
16699 # accomplished using shifting and or-ing, and looks smeared) so bold
16700 # has been excluded from the list of color-compatible attributes
16701 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
16702 # monochrome monitor.
16704 # There is one serious bug with this terminal emulation's color
16705 # support: repositioning the cursor onto a cell with non-matching
16706 # colors obliterates that cell's contents, replacing it with a blank
16707 # and displaying a colored cursor in the "current" colors. There is
16708 # no complete workaround at present [other than using the monochrome
16709 # (-m) entries,] but removing the (msgr) capability seemed to help.
16711 # The "standout" chosen was simple reverse-video, although a colorful
16712 # standout might be more aesthetically pleasing. Similarly, the bold
16713 # chosen is the terminal's own smeared bold, although a simple
16714 # color-change might be more readable. The color-bold (-b) entries
16715 # uses magenta colored text for bolding instead. The fancy color (-f
16716 # and -f2) entries use color for bold, standout and underlined text
16717 # (underlined text is still underlined, though.)
16719 # Apparently the terminal emulator does support a VT-100-style
16720 # alternate character set, but all the alternate character set
16721 # positions have been left blank in the font. For this reason, no
16722 # alternate character set capabilities have been included in this
16723 # description. The console driver appears to be ASCII-only, so (enacs)
16724 # has been excluded [although the VT-100 sequence does work.]
16726 # The default Mac OS X and Darwin installation reports "vt100" as the
16727 # terminal type, and exports no helpful environment variables. To fix
16728 # this, change the "console" entry in /etc/ttys from "vt100" to
16729 # "xnuppc-WxH", where W and H are the character dimensions of your
16730 # console (see below.)
16732 # The font used by the terminal emulator is apparently one originally
16733 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
16734 # file includes descriptions for the following geometries:
16736 # Pixels Characters Entry Name (append -m for monochrome)
16737 # -------------------------------------------------------------------
16738 # 640x400 80x25 xnuppc-80x25
16739 # 640x480 80x30 xnuppc-80x30
16740 # 720x480 90x30 xnuppc-90x30
16741 # 800x600 100x37 xnuppc-100x37
16742 # 896x600 112x37 xnuppc-112x37
16743 # 1024x640 128x40 xnuppc-128x40
16744 # 1024x768 128x48 xnuppc-128x48
16745 # 1152x768 144x48 xnuppc-144x48
16746 # 1280x1024 160x64 xnuppc-160x64
16747 # 1600x1024 200x64 xnuppc-200x64
16748 # 1600x1200 200x75 xnuppc-200x75
16749 # 2048x1536 256x96 xnuppc-256x96
16751 # The basic "xnuppc" entry includes no size information, and the
16752 # emulator includes no reporting capability, so you'll be at the mercy
16753 # of the TTY device (which reports incorrectly on my hardware.) The
16754 # color-bold entries do not include size information.
16756 # The '+' entries are building blocks
16757 xnuppc+basic|Darwin PowerPC Console basic capabilities,
16758 am, bce, mir, xenl,
16760 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16761 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16762 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16763 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
16764 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
16765 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16766 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
16767 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16769 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16770 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16771 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
16773 xnuppc+c|Darwin PowerPC Console ANSI color support,
16774 colors#8, ncv#32, pairs#64,
16775 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16777 xnuppc+b|Darwin PowerPC Console color-bold support,
16780 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16783 xnuppc+f|Darwin PowerPC Console fancy color support,
16785 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
16786 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
16788 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
16791 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
16792 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
16794 # Building blocks for specific screen sizes
16795 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
16798 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
16801 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
16804 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
16805 cols#100, lines#37,
16807 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
16808 cols#112, lines#37,
16810 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
16811 cols#128, lines#40,
16813 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
16814 cols#128, lines#48,
16816 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
16817 cols#144, lines#48,
16819 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
16820 cols#160, lines#64,
16822 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
16823 cols#200, lines#64,
16825 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
16826 cols#200, lines#75,
16828 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
16829 cols#256, lines#96,
16831 # These are different combinations of the building blocks
16833 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
16836 xnuppc|darwin|Darwin PowerPC Console (color),
16837 use=xnuppc+c, use=xnuppc+basic,
16839 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
16842 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
16843 use=xnuppc+b, use=xnuppc+c,
16845 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
16848 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
16849 use=xnuppc+f, use=xnuppc+c,
16851 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
16854 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
16855 use=xnuppc+f2, use=xnuppc+c,
16857 # Combinations for specific screen sizes
16858 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
16859 use=xnuppc+80x25, use=xnuppc+basic,
16861 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
16862 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
16864 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
16865 use=xnuppc+80x30, use=xnuppc+basic,
16867 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
16868 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
16870 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
16871 use=xnuppc+90x30, use=xnuppc+basic,
16873 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
16874 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
16876 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
16877 use=xnuppc+100x37, use=xnuppc+basic,
16879 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
16880 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
16882 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
16883 use=xnuppc+112x37, use=xnuppc+basic,
16885 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
16886 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
16888 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
16889 use=xnuppc+128x40, use=xnuppc+basic,
16891 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
16892 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
16894 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
16895 use=xnuppc+128x48, use=xnuppc+basic,
16897 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
16898 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
16900 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
16901 use=xnuppc+144x48, use=xnuppc+basic,
16903 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
16904 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
16906 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
16907 use=xnuppc+160x64, use=xnuppc+basic,
16909 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
16910 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
16912 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
16913 use=xnuppc+200x64, use=xnuppc+basic,
16915 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
16916 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
16918 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
16919 use=xnuppc+200x75, use=xnuppc+basic,
16921 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
16922 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
16924 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
16925 use=xnuppc+256x96, use=xnuppc+basic,
16927 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
16928 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
16930 #### Radio Shack/Tandy
16933 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
16934 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
16935 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
16936 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
16938 cols#80, it#8, lines#24,
16939 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
16940 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
16941 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
16942 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
16943 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
16944 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
16945 # (trs2: removed obsolete ":nl=^_:" -- esr)
16946 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
16948 cols#80, it#8, lines#24,
16949 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
16950 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
16951 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
16952 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
16953 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
16954 # (This had extension capabilities
16955 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
16956 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
16957 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
16958 trs16|trs-80 model 16 console,
16960 cols#80, it#8, lines#24,
16961 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
16962 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
16963 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16964 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
16965 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16966 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
16967 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
16968 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
16969 smacs=\ERG, smso=\ERD,
16974 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
16977 cols#80, it#8, lines#25,
16978 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
16979 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
16980 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
16981 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
16982 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
16983 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
16984 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
16986 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
16988 # MiNT VT52 emulation. 80 columns, 25 rows.
16989 # MiNT is Now TOS, the operating system which comes with all Ataris now
16990 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
16991 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
16992 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
16993 st52|Atari ST with VT52 emulation,
16996 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
16997 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16998 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
16999 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
17000 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
17001 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
17002 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
17003 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
17004 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
17005 smcup=\Ee, smso=\Ep,
17007 #### Commodore Business Machines
17009 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17010 # after years of shaky engineering and egregious mismanagement. Made one
17011 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17012 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17013 # ever (most units sold); they can still be found gathering dust in closets
17017 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17018 # Added a few more entries, converted caret-type control sequence (^x) entries
17019 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17020 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17022 # :as:, :ae: Support for alternate character sets.
17023 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17024 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17025 # This one appears to fix a problem I always had with a line ending
17026 # at 'width+1' (I think) followed by a blank line in vi. The blank
17027 # line tended to disappear and reappear depending on how the screen
17028 # was refreshed. Note that this is probably needed only if you use
17029 # something like a Dnet Fterm with the window sized to some peculiar
17030 # dimension larger than 80 columns.
17031 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17032 # (amiga: removed obsolete :kn#10:,
17033 # also added empty <acsc> to suppress a warning --esr)
17035 OTbs, am, bw, xenl,
17037 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17038 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17039 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17040 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17041 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17042 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17043 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17044 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17045 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17046 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17047 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17048 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17049 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17051 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17052 # (amiga: added empty <acsc> to suppress a warning.
17053 # I'm told this entry screws up badly with AS225, the Amiga
17054 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17055 amiga-h|Hans Verkuil's Amiga ANSI,
17058 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17059 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17060 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17061 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17062 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17063 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17064 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17065 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17066 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17067 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17068 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17069 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17070 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17071 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17072 smso=\2337m, smul=\2334m,
17074 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17076 # Pavel Fedin added
17081 amiga-8bit|Amiga ANSI using 8-bit controls,
17082 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17083 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17084 kpp=\233T, ri=\215, rin@, use=amiga-h,
17086 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17087 # requires use of appropriate preferences settings.
17088 amiga-vnc|Amiga using VNC console (black on light gray),
17089 am, da, db, msgr, ndscr,
17090 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17091 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17092 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17093 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17094 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17095 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17096 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17097 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17098 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17099 indn=\E[%p1%dS, invis=\E8m,
17100 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17101 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17102 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17103 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17104 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17105 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17106 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17107 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17108 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17109 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17110 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17111 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17112 smso=\E[1m, smul=\E[4m,
17114 # MorphOS on Genesi Pegasos
17115 # By Pavel Fedin <sonic_amiga@rambler.ru>
17117 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17118 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17119 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17120 ri=\215, rin@, use=amiga-h,
17122 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17123 # I'm trying to write a termcap for a commodore b-128, and I'm
17124 # having a little trouble. I've had to map most of my control characters
17125 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17126 # and create some functions (like cm), but thats life.
17127 # The problem is with the arrow keys - right, and up work fine, but
17128 # left deletes the previous character and down I just can't figure out.
17129 # Jove knows what I want, but I don't know what it's sending to me (it
17130 # isn't thats bound to next-line in jove).
17131 # Anybody got any ideas? Here's my termcap.
17132 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17134 commodore|b-128|Commodore B-128 micro,
17136 OTdN#20, cols#80, lines#24, pb#150,
17137 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17138 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17139 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17140 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17141 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17146 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17147 northstar|North Star Advantage,
17151 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17152 el=\016$<200/>, home=\034\032$<200/>,
17156 # Thu Jul 7 03:55:16 1983
17158 # As an aside, be careful; it may sound like an anomaly on the
17159 # Osborne, but with the 80-column upgrade, it's too easy to
17160 # enter lines >80 columns!
17162 # I've already had several comments...
17163 # The Osborne-1 with the 80-col option is capable of being
17164 # 52, 80, or 104 characters wide; default to 80 for compatibility
17165 # with most systems.
17167 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17168 osborne-w|osborne1-w|osborne I in 104-column mode,
17170 cols#104, lines#24,
17171 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17172 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17173 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
17174 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
17175 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
17176 osborne|osborne1|osborne I in 80-column mode,
17177 OTbs, am, mir, msgr, ul, xhp,
17178 OTdB#4, cols#80, lines#24,
17179 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
17180 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17181 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
17182 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
17183 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
17185 # Osborne Executive definition from BRL
17186 # Similar to tvi920
17187 # Added by David Milligan and Tom Smith (SMU)
17188 osexec|Osborne executive,
17190 OTug#1, cols#80, lines#24, xmc#1,
17191 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17192 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17193 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
17194 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
17195 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
17196 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
17197 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
17200 #### Console types for obsolete UNIX clones
17202 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
17203 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
17204 # were commercial, Minix an educational tool sold in conjunction with a book.
17205 # Memory-segmentation limits and a strong tendency to look like V7 long after
17206 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
17207 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
17208 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
17209 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
17210 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
17211 # even as single processes under SunOS and the Macintosh OS.
17214 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
17215 minix|minix console (v1.7),
17217 cols#80, it#8, lines#25,
17218 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17219 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17220 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17221 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17222 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17223 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17224 is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17225 kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
17226 kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
17227 lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
17228 rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17229 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
17230 minix-old|minix console (v1.5),
17232 cols#80, it#8, lines#25,
17233 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17234 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17235 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17236 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17237 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17238 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17239 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17240 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
17241 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
17242 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17243 # The linewrap option can be specified by editing /usr/include/minix/config.h
17244 # before recompiling the minix 1.5 kernel.
17245 minix-old-am|minix console with linewrap,
17248 pc-minix|minix console on an Intel box,
17249 use=klone+acs, use=minix,
17251 # According to the Coherent 2.3 manual, the PC console is similar
17252 # to a z19. The differences seem to be (1) 25 lines, (2) no status
17253 # line, (3) standout is broken, (4) ins/del line is broken, (5)
17254 # has blinking and bold.
17255 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
17257 cols#80, it#8, lines#25,
17258 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17259 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
17260 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
17261 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
17262 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
17264 # According to the Venix 1.1 manual, the PC console is similar
17265 # to a DEC vt52. Differences seem to be (1) arrow keys send
17266 # different strings, (2) enhanced standout, (3) added insert/delete line.
17267 # Note in particular that it doesn't have automatic margins.
17268 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
17269 # not described here because this derives from an old termcap entry.
17270 pc-venix|venix|IBM PC console running Venix,
17271 cols#80, it#8, lines#25,
17272 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17273 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17274 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
17275 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
17277 #### Miscellaneous microcomputer consoles
17279 # If you know anything more about any of these, please tell me.
17282 # The MAI Basic Four computer was obsolete at the end of the 1980s.
17283 # It may be used as a terminal by putting it in "line" mode as seen on
17284 # one of the status lines.
17285 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
17286 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
17287 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
17288 # used \ED instead.
17289 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
17290 mai|basic4|MAI Basic Four in ansi mode,
17291 am, da, db, mir, msgr,
17292 cols#82, it#8, lines#25,
17293 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
17294 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
17295 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
17296 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
17297 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
17298 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
17299 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17300 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
17301 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
17302 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17303 smir=\E[4h, smso=\E[7m, smul=\E[4m,
17304 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
17305 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
17307 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
17308 # The Basis 108 was a Apple II clone, manufactured by the "Basis
17309 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
17310 # about 1,5 km from where I live, but doesn't build own computers any
17311 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
17312 # equipped with one or two 5.25" disk drives, had a monochrome and colour
17313 # video output for a TV set or a dedicated monitor and several slots for
17314 # Apple II cards. Basis 108 were quite popular at german schools before
17315 # the advent of the IBM PC. They run, for example, the UCSD Pascal
17316 # development system (which I used even in 1993 to program the steering
17317 # and data recording for our school's experimental solar panel :), Apple DOS
17319 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
17320 basis|BASIS108 computer with terminal translation table active,
17321 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
17322 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
17323 smso=\E(, use=adm3a,
17324 # luna's BMC terminal emulator
17325 luna|luna68k|LUNA68K Bitmap console,
17326 cols#88, lines#46, use=ansi-mini,
17327 megatek|pegasus workstation terminal emulator,
17330 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
17331 # interface (pre-Macintosh by several years) that went nowhere.
17332 xerox820|x820|Xerox 820,
17335 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17336 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
17339 #### Videotex and teletext
17342 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
17343 # \E[?3l 80 columns
17344 # \E[?4l scrolling on
17345 # \E[12h local echo off
17346 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
17347 # \E)0 G1 DEC set (line graphics)
17349 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
17350 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
17351 OTbs, eslok, hs, xenl,
17352 cols#80, it#8, lines#24, wsl#72, xmc#0,
17353 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
17354 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
17355 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17356 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17357 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17358 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17359 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
17360 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
17361 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
17362 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
17363 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
17364 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
17365 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
17366 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
17367 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
17368 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
17369 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
17370 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
17371 u6=\E[%i%d;%dR, u7=\E[6n,
17373 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
17375 minitel1|minitel 1,
17376 am, bw, eslok, hs, hz, msgr,
17377 colors#8, cols#40, lines#24, pairs#8,
17378 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
17379 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17380 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
17381 enacs=^Y, fsl=^J, home=^^, ind=^J,
17382 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
17383 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
17384 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
17385 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
17386 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
17387 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
17388 minitel1b|minitel 1-bistandard (in 40cols mode),
17390 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
17391 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17392 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
17393 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
17394 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17395 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
17396 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
17397 # <rmkx> posait des problemes (logout en sortant de vi).
17398 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
17400 colors@, cols#80, it#8, pairs@,
17401 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
17402 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
17403 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
17404 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
17405 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
17406 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
17407 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
17408 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
17409 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
17411 ######## OBSOLETE VDT TYPES
17413 # These terminals are *long* dead -- these entries are retained for
17414 # historical interest only.
17416 #### Amtek Business Machines
17419 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
17420 # but these caps were commented out in 8.3; also, removed overridden
17421 # ":do=^J:" -- esr)
17422 abm80|amtek business machines 80,
17425 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
17426 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
17427 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
17429 #### Bell Labs blit terminals
17431 # These were AT&T's official entries. The 5620 FAQ maintained by
17432 # David Breneman <daveb@dgtl.com> has this to say:
17434 # Actually, in the beginning was the Jerq, and the Jerq was white with a
17435 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
17436 # was good. But lo, upon the horizon loomed a mighty management-type person
17437 # (known now only by the initials VP) who said, the mighty Jerq must stay
17438 # alone, and could not go forth into the world. So Locanthi and Pike put the
17439 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
17440 # world. And the Jerq lived the rest of its days in research, but never
17441 # strayed from those paths.
17443 # In all seriousness, the Blit was originally known as the Jerq, but when
17444 # it started to be shown outside of the halls of the Bell Labs Research
17445 # organization, the management powers that be decided that the name could
17446 # not remain. So it was renamed to be Blit. This was in late 1981.
17448 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
17452 blit|jerq|blit running teletype rom,
17454 cols#87, it#8, lines#72,
17455 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17456 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17457 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
17458 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
17459 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
17460 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
17462 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
17463 cbblit|fixterm|blit running columbus code,
17465 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
17466 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
17467 smul=\EU", use=blit,
17469 oblit|ojerq|first version of blit rom,
17470 am, da, db, eo, mir, ul, xon,
17471 cols#88, it#8, lines#72,
17472 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17473 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
17474 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
17475 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
17478 #### Bolt, Beranek & Newman (bbn)
17480 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
17481 # The parent company, best known as the architects of the Internet, is
17484 # Jeff DelPapa <dp@world.std.com> writes:
17485 # The bitgraph was a large white box that contained a monochrome bitmap
17486 # display, and a 68000 to run it. You could download code and run it on
17487 # the cpu, it had 128kb (I think) of memory. I used one in the late
17488 # 70's, sure beat a vt100. It had one strange feature tho -- it used
17489 # the cpu to bitblt pixels to scroll, it took longer than the refresh
17490 # rate, and looked like a rubber sheet stretching, then snapping
17491 # upwards. It had everything the early mac had, except a floppy drive a
17492 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
17493 # Beranek and Neuman) sold at most a few hundred of them to the real
17494 # world. DOD may have bought more...
17497 # Entries for the BitGraph terminals. The problem
17498 # with scrolling in vi can only be fixed by getting BBN to put
17499 # smarter scroll logic in the terminal or changing vi or padding
17500 # scrolls with about 500 ms delay.
17502 # I always thought the problem was related to the terminal
17503 # counting newlines in its input buffer before scrolling and
17504 # then moving the screen that much. Then vi comes along and
17505 # paints lines in on the bottom line of the screen, so you get
17506 # this big white gap.
17508 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
17509 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17511 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
17512 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17514 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
17517 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
17518 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17519 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
17520 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
17521 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17522 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
17523 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
17524 sgr0=\E[m, smkx=\E=, smso=\E[7m,
17526 bg1.25rv|bbn bitgraph 1.25 (reverse video),
17527 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17529 bg1.25nv|bbn bitgraph 1.25 (normal video),
17530 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17532 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
17533 bg1.25|bbn bitgraph 1.25,
17535 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
17536 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
17537 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
17538 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
17539 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
17540 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
17541 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
17544 #### Bull (bq, dku, vip)
17546 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
17548 #============================================#
17549 # BULL QUESTAR 210 `SDP' terminals emulation #
17550 #============================================#
17552 # Description written by R.K.Saunders (Bull Transac)
17554 # Modifications written by F. Girard (Bull MTS)
17555 # 19-05-87 V02.00.01
17556 # 17-12-87 V02.00.02
17557 # 15-09-89 V02.00.05
17559 # Typical technical selections F1 (modes SDP/ROLL):
17560 # -------------------------------------------------------
17561 # | 01 02 03 04 05 06 07 08 09 10 |
17562 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
17564 # | 11 12 13 14 15 16 17 18 19 20 |
17565 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
17567 # | 21 22 23 24 25 26 27 28 29 30 |
17568 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
17570 # | 31 32 33 34 35 36 37 38 39 40 |
17571 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
17572 # -------------------------------------------------------
17573 # Typical firmware identification F5 "etat 6":
17574 # P287.02.04b (AZERTY)
17575 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
17576 # P298.03.03 (monochrome) or P374.03.02 (colour)
17578 # SM SDP mode (VIP command): ^[[?=h
17579 # RIS (erases screen): ^[c
17580 # DMI disable keyboard: ^[`
17581 # SM double rendition mode: ^[[?>h
17582 # RM solicited status mode: ^[[5l
17583 # RM character mode: ^[[>l
17584 # RM echoplex mode: ^[[12l
17585 # RM column tab mode: ^[[18l
17586 # RM forbid SS2 keyboard mode: ^[[?<l
17587 # SM scroll mode: ^[[=h
17588 # FCF enable XON/XOFF: ^[P1s^[\
17589 # MTL select end msg character: ^[[^Wp
17590 # EMI enable keyboard: ^[b
17591 # RIS retour etat initial: ^[c
17592 # enable FC keypad: ^[[?<h,
17593 # MPW map status line window: ^[PY99:98^[\
17594 # SCP select status line: ^[[0;98v
17595 # ED erase entire partition: ^[[2J
17596 # SCP select main partition: ^[[v
17597 # SM character insertion mode: ^[[4h
17598 # RM character replacement mode: ^[[4l
17599 # COO cursor on: ^[[r
17600 # COO cursor off: ^[[1r
17601 # SGR dim (turquoise) rev attr: ^[[2;7m
17602 # SGR Data normal attr: ^[[m
17603 # SO Line-graphic mode ON: ^N
17604 # SI Line-graphic mode OFF: ^O
17605 # MC start routing to printer: ^[[5i
17606 # MC stop routing to printer: ^M^[[4i
17609 # This entry covers the following terminals:
17610 # dku7102, tws2102, and tws models 2105 to 2112
17611 tws-generic|dku7102|Bull Questar tws terminals,
17612 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
17613 cols#80, it#8, lines#24, wsl#80,
17614 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
17615 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
17616 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
17617 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
17618 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17619 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
17620 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
17621 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
17622 il1=\E[L, ind=^J, invis=\E[0;8m,
17623 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
17624 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
17625 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
17626 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17627 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
17628 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
17629 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
17630 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
17631 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
17632 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
17633 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
17634 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17635 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
17636 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
17637 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
17638 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
17639 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
17641 tws2103|xdku|BULL Questar tws2103,
17642 ht=^I, use=tws-generic,
17643 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
17644 ht=^I, use=tws2102-sna,
17645 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
17646 clear=\E[2J\E[H, cup@, dl@, dl1@,
17647 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
17648 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
17650 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
17651 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
17652 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
17654 #=========================================================#
17655 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
17656 #=========================================================#
17658 # Description written by J. Staerck (BULL SA)
17659 # Copyright (c) 1989 BULL SA
17660 #---------------------------------------------------------------------------
17661 # This entry is used for terminals with vt320 emulation mode
17662 # and following set-up :
17663 # 8 bit ISO Latin Character Set (ISO 8859-1),
17664 # 7 bit Control Characters,
17665 # 80 columns screen.
17666 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
17667 # They are used in string capabilities with vt220-320 emulation mode.
17668 # In the following DEC definitions, two kinds of terminfo databases are
17670 # 1. the first with Command Sequence Introducer starting with escape
17671 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
17672 # 2. the second with Command Sequence Introducer starting with escape
17673 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
17674 # Soft Terminal Reset esc [ ! p
17675 # RIS (erases screen): esc c
17676 # DECKPNM numeric keypad mode: esc >
17677 # DECKPAM applic. keypad mode: esc =
17678 # DECSTBM Scrolling region: esc [ r
17679 # SCS select G0 = US: esc ( B
17680 # SCS select G1 = line-graphic: esc ) 0
17681 # Select 7-bit C1 controls: esc sp F
17682 # Select 8-bit C1 controls: esc sp G
17683 # Select cursor home: esc [ H
17684 # Select erase screen: esc [ J
17685 # SM KAM lock keyboard: esc [ 2 h
17686 # RM KAM unlock keyboard: esc [ 2 l
17687 # SM SRM local echo off: esc [ 1 2 h
17688 # RM SRM local echo on: esc [ 1 2 l
17689 # SM LNM New line : esc [ 2 0 h
17690 # RM LNM return = CR only: esc [ 2 0 l
17691 # SM DECCKM cursor keys mode: esc [ ? 1 h
17692 # RM DECCKM appli. keys mode: esc [ ? 1 l
17693 # SM DECANM ANSI mode on: esc [ ? 2 h
17694 # RM DECANM ANSI mode off: esc [ ? 2 l
17695 # SM DECCOLM 132-column screen: esc [ ? 3 h
17696 # RM DECCOLM 80-column screen: esc [ ? 3 l
17697 # SM DECSCLM Smooth scroll: esc [ ? 4 h
17698 # RM DECSCLM Jump scroll: esc [ ? 4 l
17699 # SM DECSCNM screen light backgr. esc [ ? 5 h
17700 # RM DECSCNM screen dark backgr. esc [ ? 5 l
17701 # SM DECOM move within margins: esc [ ? 6 h
17702 # RM DECOM move outside margins: esc [ ? 6 l
17703 # SM DECAWM auto right margin: esc [ ? 7 h
17704 # RM DECAWM auto right margin: esc [ ? 7 l
17705 # SM DECARM auto repeat: esc [ ? 8 h
17706 # RM DECARM auto repeat: esc [ ? 8 l
17707 # DECSASD Select active main: esc [ 0 $ }
17708 # DECSASD Select active status: esc [ 1 $ }
17709 # DECSSDT Select status none: esc [ 0 $ ~
17710 # DECSSDT Select status indic.: esc [ 1 $ ~
17711 # DECSSDT Select status host-wr: esc [ 2 $ ~
17712 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
17713 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
17714 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
17715 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
17716 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
17717 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
17718 # SM DECKBUM clavier informatique esc [ ? 6 8 h
17719 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
17720 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
17721 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
17722 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
17723 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
17724 # Char. and Line attributes: esc [ Ps ... Ps m
17725 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17726 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17729 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
17730 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
17731 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17732 cols#80, it#8, lines#24, vt#3, wsl#80,
17733 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17734 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17735 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
17736 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17737 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17738 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17739 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17740 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
17741 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
17742 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
17743 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17744 is1=\E[63;1"p\E[2h,
17745 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17746 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
17747 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
17748 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
17749 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
17750 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
17751 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
17752 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17753 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17754 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
17755 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17756 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
17757 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
17758 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17759 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17760 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
17761 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
17762 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
17763 bq300-rv|Bull vt320 reverse 80 columns,
17764 flash=\E[?5l$<50>\E[?5h,
17765 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17767 bq300-w|Bull vt320 132 columns,
17769 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17770 rs2=\E[?3h, use=bq300,
17771 bq300-w-rv|Bull vt320 reverse mode 132 columns,
17773 flash=\E[?5l$<50>\E[?5h,
17774 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17775 rs2=\E[?3h, use=bq300,
17777 # This entry is used for terminals with vt320 emulation mode
17778 # and following set-up :
17779 # 8 bit ISO Latin Character Set (ISO 8859-1),
17780 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
17781 # 80 columns screen.
17782 # Soft Terminal Reset csi ! p
17783 # RIS (erases screen): esc c
17784 # DECKPNM numeric keypad mode: esc >
17785 # DECKPAM applic. keypad mode: esc =
17786 # DECSTBM Scrolling region: esc [ r
17787 # SCS select G0 = US: esc ( B
17788 # SCS select G1 = line-graphic: esc ) 0
17789 # Select 7-bit C1 controls: esc sp F
17790 # Select 8-bit C1 controls: esc sp G
17791 # Select cursor home: csi H
17792 # Select erase screen: csi J
17793 # SM KAM lock keyboard: csi 2 h
17794 # RM KAM unlock keyboard: csi 2 l
17795 # SM SRM local echo off: csi 1 2 h
17796 # RM SRM local echo on: csi 1 2 l
17797 # SM LNM New line : csi 2 0 h
17798 # RM LNM return = CR only: csi 2 0 l
17799 # SM DECCKM cursor keys mode: csi ? 1 h
17800 # RM DECCKM appli. keys mode: csi ? 1 l
17801 # SM DECANM ANSI mode on: csi ? 2 h
17802 # RM DECANM ANSI mode off: csi ? 2 l
17803 # SM DECCOLM 132-column screen: csi ? 3 h
17804 # RM DECCOLM 80-column screen: csi ? 3 l
17805 # SM DECSCLM Smooth scroll: csi ? 4 h
17806 # RM DECSCLM Jump scroll: csi ? 4 l
17807 # SM DECSCNM screen light backgr. csi ? 5 h
17808 # RM DECSCNM screen dark backgr. csi ? 5 l
17809 # SM DECOM move within margins: csi ? 6 h
17810 # RM DECOM move outside margins: csi ? 6 l
17811 # SM DECAWM auto right margin: csi ? 7 h
17812 # RM DECAWM auto right margin: csi ? 7 l
17813 # SM DECARM auto repeat: csi ? 8 h
17814 # RM DECARM auto repeat: csi ? 8 l
17815 # DECSASD Select active main: csi 0 $ }
17816 # DECSASD Select active status: csi 1 $ }
17817 # DECSSDT Select status none: csi 0 $ ~
17818 # DECSSDT Select status indic.: csi 1 $ ~
17819 # DECSSDT Select status host-wr: csi 2 $ ~
17820 # SM DECTCEM Visible cursor: csi ? 2 5 h
17821 # RM DECTCEM Invisible cursor: csi ? 2 5 l
17822 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
17823 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
17824 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
17825 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
17826 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
17827 # Char. and Line attributes: csi Ps ... Ps m
17828 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17829 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17830 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
17831 bq300-8|Bull vt320 full 8 bits 80 columns,
17832 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17833 cols#80, it#8, lines#24, vt#3, wsl#80,
17834 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17835 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
17836 clear=\233H\233J, cnorm=\233?25h, cr=^M,
17837 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
17838 cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
17839 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
17840 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
17841 el=\233K, el1=\2331K, enacs=\E(B\E)0,
17842 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
17843 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
17844 is1=\E[63;2"p\E[2h,
17845 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17846 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
17847 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
17848 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17849 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
17850 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
17851 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
17852 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
17853 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
17854 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
17855 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
17856 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
17857 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
17858 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
17859 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17860 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17861 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
17862 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
17863 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
17864 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
17865 flash=\233?5l$<50>\233?5h,
17866 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17868 bq300-8w|Bull vt320 8-bit 132 columns,
17870 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17871 rs2=\233?3h, use=bq300-8,
17872 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
17874 flash=\233?5l$<50>\233?5h,
17875 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17876 rs2=\233?3h, use=bq300-8,
17878 # This entry is used for terminals with vt320 emulation mode
17879 # a 102 keys keyboard (PC scancode !) and following set-up :
17880 # 8 bit ISO Latin Character Set (ISO 8859-1),
17881 # 7 bit Control Characters,
17882 # 80 columns screen.
17883 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
17884 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
17885 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
17886 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
17887 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
17888 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17889 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
17890 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
17891 flash=\E[?5l$<50>\E[?5h,
17892 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17894 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
17896 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17897 rs2=\E[?3h, use=bq300-pc,
17898 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
17900 flash=\E[?5l$<50>\E[?5h,
17901 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17902 rs2=\E[?3h, use=bq300-pc,
17903 # 8 bit ISO Latin Character Set (ISO 8859-1),
17904 # 8 bit Control Characters,
17905 # 80 columns screen.
17906 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
17907 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
17908 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
17909 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
17910 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
17911 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
17912 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
17913 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
17914 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
17915 flash=\E[?5l$<50>\E[?5h,
17916 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17918 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
17920 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17921 rs2=\E[?3h, use=bq300-8-pc,
17922 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
17924 flash=\E[?5l$<50>\E[?5h,
17925 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17926 rs2=\E[?3h, use=bq300-8-pc,
17928 #======================================================#
17929 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
17930 #======================================================#
17932 # normal mode, 8 bits, 80 columns terminal.
17934 # RIS reset initial state: ^[c
17935 # BLE bell enable ^[h
17936 # BLD bell disable ^[g
17937 # CAMS char. attr. mode set ^[[D
17938 # CAMR char. attr. mode reset ^[[G
17940 # KBU keyboard unlock (set) ^[[W
17941 # KBL keyboard lock (reset) ^[[X
17942 # CM character mode (async.) ^[k
17943 # NEP non echoplex mode (by host) ^[l
17944 # EP echoplex mode (by host) ^[m
17945 # IM insert mode set ^[[I
17946 # IM insert mode reset ^[[J
17947 # RMS roll mode set ^[r
17948 # RMR roll mode reset ^[q
17949 # SM78 set mode vip7800 ^[[1q
17950 # SD scroll up (72 lines) ^[[0s
17951 # SD scroll down (72 lines) ^[[1s
17952 # RBM block mode reset ^[[E
17953 # SLS status line set ^[w
17954 # SLR status line reset ^[v
17955 # SLL status line lock ^[O
17956 # LGS Line-graphic mode set ^[G
17957 # LGR Line-graphic mode reset ^[F
17958 # TBC tab clear (at cursor pos.) ^[[g
17959 # TBI tab initialize ^[[N
17960 # TBS tab set (at cursor pos.) ^[p
17961 # PDS print data space ^[[0p
17962 # PHD print host data ^[[3p
17963 # PDT print data terminator ^[[<p
17964 # PRES print adapter reset ^[[2p
17965 # SSPR multi-part. reset ^[[<>u
17966 # SSP0 partition 0 set ^[[00u
17967 # SSP1 partition n format 1 ^[[PnPnSTRINGu
17968 # SSP2 partition n format 2 ^[[PnPnSTRINGu
17969 # SSP3 partition n format 3 ^[[PnPnu
17970 # ATR attribute (visual)
17973 # hide (blank) : ^[sH
17975 # inverse video : ^[sI
17980 # This covers the vip7800 and BQ3155-vip7800
17981 vip|Bull Questar 3155-7800,
17982 am, eslok, hs, km, mc5i, msgr, xenl, xon,
17983 cols#80, it#8, lines#24, vt#3, wsl#80,
17984 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
17985 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17986 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
17987 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
17988 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
17989 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
17990 is2=\E[00u\E[<>001001024080024080u\E[01u,
17991 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
17992 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
17993 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
17994 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
17995 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
17996 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
17997 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
17998 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
17999 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18000 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18001 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18002 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18003 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18004 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18005 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18006 smul=\Es_, tbc=\E[N, tsl=\Ew,
18007 # normal screen, 8 bits, 132 columns terminal.
18008 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18010 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18011 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18013 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18014 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18015 cols#132, lines#72, wsl#132,
18016 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18021 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18022 # that is smaller than the screen, and puts up a warning message
18023 # outside the window. Te erases the warning message, puts the
18024 # window back to be the whole screen, and puts the cursor at just
18025 # below the small window. I defined <cnorm> and <civis> to really turn
18026 # the cursor on and off, but I have taken this out since I don't
18027 # like the cursor being turned off when vi exits.
18028 cg7900|chromatics|chromatics 7900,
18031 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18032 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18033 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18034 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18035 rmso=\001C1\,\001c2\,,
18036 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18037 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18039 #### Computer Automation
18042 ca22851|computer automation 22851,
18045 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18046 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18047 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18052 # This entry has correct padding and the undocumented "ri" capability
18053 cyb83|xl83|cybernex xl-83,
18056 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18057 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18058 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18059 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18060 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18061 cyb110|mdl110|cybernex mdl-110,
18064 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18065 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18066 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18067 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18068 ht=\011$<43>, ich1=\016A\035$<3.5>,
18069 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18073 # Datapoint is gone. They used to be headquartered in Texas.
18074 # They created ARCnet, an Ethernet competitor that flourished for a while
18075 # in the early 1980s before 3COM got wise and cut its prices. The service
18076 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18079 dp3360|datapoint|datapoint 3360,
18082 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18083 ed=^_, el=^^, home=^], ind=^J,
18085 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18086 # The Datapoint 8242 Workstation was sold at least between 1985
18087 # and 1989. To make the terminal work with this entry, press
18088 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18089 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18090 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18091 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18092 # fact unusable because the strings sent by the terminal conflict
18093 # with other keys).
18094 # The terminal is capable of displaying "box draw" characters.
18095 # For each graphic character you must send 2 ESC's (\E\E) followed
18096 # by a control character as follows:
18097 # character meaning
18098 # ========= =======
18101 # ctrl-G bottom tee
18104 # ctrl-J top left corner
18105 # ctrl-K top right corner
18106 # ctrl-L bottom left corner
18107 # ctrl-M bottom right corner
18108 # ctrl-N horizontal line
18109 # ctrl-O vertical line
18110 # Unfortunately this cannot be fitted into the termcap/terminfo
18111 # description scheme.
18112 dp8242|datapoint 8242,
18115 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18116 cr=^M, cub1=^H, cud1=^J,
18117 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18118 home=^U, ht=^I, il1=\E^T, ind=^C,
18119 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18120 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18121 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18122 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18123 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18124 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18125 smso=\E^E, smul=\E^F,
18126 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18128 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18130 # These entries are DEC's official terminfos for its older terminals.
18131 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18132 # Engineering for more information. Updated terminfos and termcaps
18133 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18139 bel=^G, cr=^M, cub1=^H, cud1=^J,
18143 bel=^G, cr=^M, cub1=^H, cud1=^J,
18147 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18148 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
18152 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18153 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18154 el=\EK, ht=^I, ind=^J, ri=\EI,
18155 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
18156 vt61|vt-61|vt61.5|dec vt61,
18158 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
18159 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
18160 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
18161 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18164 # The gigi does standout with red!
18165 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
18166 gigi|vk100|dec gigi graphics terminal,
18169 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
18170 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18171 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18172 el=\E[K, ht=^I, ind=^J,
18173 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
18174 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
18175 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
18176 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18177 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
18180 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
18181 # a PC differentiated from the IBM clones. It was a total, ludicrous,
18182 # grossly-overpriced failure (among other things, DEC's OS didn't include
18183 # a format program, so you had to buy pre-formatted floppies from DEC at
18184 # a hefty premium!).
18185 pro350|decpro|dec pro console,
18187 cols#80, it#8, lines#24,
18188 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18189 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
18190 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18191 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18192 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
18193 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
18194 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
18199 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
18200 dw2|decwriter|dw|decwriter II,
18203 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
18204 # \E(B Use U.S. character set (otherwise # => british pound !)
18205 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
18206 # \E[w 10 char/in pitch
18207 # \E[1;132 full width horizontal margins
18208 # \E[2g clear all tab stops
18210 # \E[66t 66 lines/page (for \f)
18211 # \E[1;66r full vertical page can be printed
18212 # \E[4g clear vertical tab stops
18213 # \E> disable alternate keypad mode (so it transmits numbers!)
18214 # \E[%i%p1%du set tab stop at column %d (origin == 1)
18215 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
18218 # The dw3 does standout with wide characters.
18220 dw3|la120|decwriter III,
18223 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
18224 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
18225 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
18226 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
18230 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
18231 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
18233 # These aren't official
18234 ln03|dec ln03 laser printer,
18237 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
18238 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
18240 ln03-w|dec ln03 laser printer 132 cols,
18242 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
18243 kcud1=^J, nel=^M^J, use=ln03,
18245 #### Delta Data (dd)
18248 # Untested. The cup sequence is hairy enough that it probably needs work.
18249 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
18250 # There are BSD-derived termcap entries floating around for this puppy
18251 # that are *certainly* wrong.
18252 delta|dd5000|delta data 5000,
18255 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
18256 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
18257 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
18259 #### Digital Data Research (ddr)
18262 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
18263 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
18265 cols#80, it#8, lines#24, vt#3,
18266 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
18267 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
18268 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
18269 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
18270 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
18271 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18272 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
18273 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
18274 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
18275 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18276 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
18279 #### Evans & Sutherland
18282 # Jon Leech <leech@cs.unc.edu> tells us:
18283 # The ps300 was the Evans & Sutherland Picture System 300, a high
18284 # performance 3D vector graphics system with a bunch of specialized hardware.
18285 # Approximate date of release was 1982 (early 80s, anyway), and it had several
18286 # evolutions including (limited) color versions such as the PS330C. PS300s
18287 # were effectively obsolete by the late 80s, replaced by raster graphics
18288 # systems, although specialized applications like molecular modelling
18289 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
18290 # are out of production, though of course E&S is very much alive (in 1996).
18291 # (ps300: changed ":pt@:" to "it@" -- esr)
18293 ps300|Picture System 300,
18296 rmso@, rmul@, smso@, smul@, use=vt100,
18298 #### General Electric (ge)
18301 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
18304 bel=^G, cr=^M, cud1=^J, ind=^J,
18306 #### Heathkit/Zenith
18309 # Here is a description of the H19 DIP switches:
18312 # 0-3 = baud rate as follows:
18317 # 0 1 0 1 1200 baud
18318 # 1 0 0 0 2400 baud
18319 # 1 0 1 0 4800 baud
18320 # 1 1 0 0 9600 baud
18321 # 1 1 0 1 19.2K baud
18323 # 4 = parity (0 = no parity)
18324 # 5 = even parity (0 = odd parity)
18325 # 6 = stick parity (0 = normal parity)
18326 # 7 = full duplex (0 = half duplex)
18329 # 0 = block cursor (0 = underscore cursor)
18330 # 1 = no key click (0 = keyclick)
18331 # 2 = wrap at end of line (0 = no wrap)
18332 # 3 = auto LF on CR (0 = no LF on CR)
18333 # 4 = auto CR on LF (0 = no CR on LF)
18334 # 5 = ANSI mode (0 = VT52 mode)
18335 # 6 = keypad shifted (0 = keypad unshifted)
18336 # 7 = 50Hz refresh (1 = 60Hz refresh)
18338 # Factory Default settings are as follows:
18340 # S401 1 0 0 0 1 1 0 0
18341 # S402 0 0 0 0 0 0 0 0
18342 # (h19: I added <rmam>/<smam> based on the init string;
18343 # also added empty <acsc> to suppress a tic warning -- esr)
18344 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
18345 OTbs, am, mir, msgr,
18346 cols#80, it#8, lines#24,
18347 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
18348 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
18349 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
18350 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
18351 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
18352 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
18353 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
18354 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
18355 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
18356 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
18357 h19-bs|heathkit w/keypad shifted,
18358 rmkx=\Eu, smkx=\Et, use=h19-b,
18359 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
18360 rmkx=\Eu, smkx=\Et, use=h19-u,
18361 # (h19: merged in <ip> from BSDI hp19-e entry>;
18362 # also added empty <acsc> to suppress a tic warning --esr)
18363 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
18364 # Tim tells us that:
18365 # I have an old Zenith-19 terminal at home that still gets a lot of use.
18366 # This terminal suffers from the same famous insert-mode padding lossage
18367 # that has been acknowledged for the Z29 terminal. Emacs is nearly
18368 # unusable on this box, since even a half-scroll up or down the window
18369 # causes flaming terminal death.
18371 # On the Z19, the only way I have found around this problem is to remove
18372 # the :al: and :dl: entries entirely. No amount of extra padding will
18373 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
18374 # makes Emacs a little slower, but it remains in the land of the living.
18376 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
18377 OTbs, am, eslok, hs, mir, msgr,
18378 cols#80, it#8, lines#24,
18379 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
18380 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18381 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
18382 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
18383 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18384 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
18385 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
18386 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18387 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
18388 h19-u|heathkit with underscore cursor,
18389 cnorm@, cvvis@, use=h19-b,
18390 h19-g|h19g|heathkit w/block cursor,
18391 cnorm=\Ex4, cvvis@, use=h19-b,
18392 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
18394 dl1=\EM, il1=\EL, use=h19,
18396 # The major problem with the Z29 is that it requires more padding than the Z19.
18398 # The problem with declaring an H19 to be synonymous with a Z29 is that
18399 # it needs more padding. It especially loses if a program attempts
18400 # to put the Z29 into insert mode and insert text at 9600 baud. It
18401 # even loses worse if the program attempts to insert tabs at 9600
18402 # baud. Adding padding to text that is inserted loses because in
18403 # order to make the Z29 not die, one must add so much padding that
18404 # whenever the program tries to use insert mode, the effective
18405 # rate is about 110 baud.
18407 # What program would want to put the terminal into insert mode
18408 # and shove stuff at it at 9600 baud you ask?
18410 # Emacs. Emacs seems to want to do the mathematically optimal
18411 # thing in doing a redisplay rather than the practical thing.
18412 # When it is about to output a line on top of a line that is
18413 # already on the screen, instead of just killing to the end of
18414 # the line and outputting the new line, it compares the old line
18415 # and the new line and if there are any similarities, it
18416 # constructs the new line by deleting the text on the old line
18417 # on the terminal that is already there and then inserting new
18418 # text into the line to transform it into the new line that is
18419 # to be displayed. The Z29 does not react kindly to this.
18421 # But don't cry for too long.... There is a solution. You can make
18422 # a termcap entry for the Z29 that says the Z29 has no insert mode.
18423 # Then Emacs cannot use it. "Oh, no, but now inserting into a
18424 # line will be really slow", you say. Well there is a sort of a
18425 # solution to that too. There is an insert character option on
18426 # the Z29 that will insert one character. Unfortunately, it
18427 # involves putting the terminal into ansi mode, inserting the
18428 # character, and changing it back to H19 mode. All this takes 12
18429 # characters. Pretty expensive to insert one character, but it
18430 # works. Either Emacs doesn't try to use its inserting hack when
18431 # it's only given an insert character ability or the Z29 doesn't
18432 # require padding with this (the former is probably more likely,
18433 # but I haven't checked it out).
18434 # (z29: added empty <acsc> to suppress a tic warning, merged in
18435 # status line capabilities from BRL entry --esr)
18436 z29|zenith29|z29b|zenith z29b,
18437 OTbs, OTpt, am, eslok, hs, mir, msgr,
18438 OTkn#10, cols#80, lines#24,
18439 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
18440 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18441 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
18442 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
18443 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
18444 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
18445 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18446 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
18447 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
18448 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
18449 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
18450 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18451 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
18452 # the world is stable. <rs1> causes the terminal to be reset to the state
18453 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
18454 # cursor, bc -> block cursor.
18455 # From: Mike Meyers
18456 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
18457 # looks vt100-compatible -- esr)
18458 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
18459 OTbs, OTpt, am, eslok, hs, mir, msgr,
18460 OTkn#10, cols#80, it#8, lines#24,
18461 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
18462 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18463 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18464 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18465 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18466 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
18467 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
18468 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
18469 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
18470 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18471 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
18472 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
18473 rmso=\E[m, rmul=\E[m,
18474 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
18475 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
18476 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
18477 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
18478 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
18480 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
18481 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
18483 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
18484 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
18486 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
18487 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
18488 am, eslok, hs, mc5i, mir, msgr, xon,
18490 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18491 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
18492 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
18493 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18494 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18495 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18496 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18497 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
18498 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
18499 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
18500 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
18501 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
18502 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18503 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
18504 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
18505 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
18506 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
18507 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18508 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
18510 # From: Brad Brahms <Brahms@USC-ECLC>
18511 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
18512 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
18513 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
18514 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
18515 OTbs, OTpt, mir, msgr,
18516 OTkn#10, cols#80, it#8, lines#24,
18517 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
18518 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
18519 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
18520 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
18521 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
18522 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
18523 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
18524 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18525 smir=\E@, smso=\Ep,
18526 p19|h19-b with il1/dl1,
18527 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
18528 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
18529 # (ztx: removed duplicate :sr: -- esr)
18530 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
18531 OTbs, am, eslok, hs,
18532 cols#80, it#8, lines#24,
18533 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
18534 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18535 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
18536 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
18537 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
18538 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
18539 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
18540 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18542 #### IMS International (ims)
18544 # There was a company called IMS International located in Carson City,
18545 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
18546 # bus/Z80 hardware and a line of terminals called Ultimas.
18549 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
18550 ims950-b|bare ims950 no init string,
18552 # (ims950: removed obsolete ":ko@:" -- esr)
18553 ims950|ims televideo 950 emulation,
18555 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18556 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
18557 # (ims950-rv: removed obsolete ":ko@:" -- esr)
18558 ims950-rv|ims tvi950 rev video,
18560 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18561 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
18562 ims-ansi|ultima2|ultimaII|IMS Ultima II,
18564 cols#80, it#8, lines#24,
18565 clear=\E[H\E[2J, cub1=^H, cud1=\ED,
18566 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
18567 ht=^I, if=/usr/share/tabset/vt100,
18568 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
18569 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
18570 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
18573 #### Intertec Data Systems
18575 # I think this company is long dead as of 1995. They made an early CP/M
18576 # micro called the "Intertec Superbrain" that was moderately popular,
18577 # then sank out of sight.
18580 superbrain|intertec superbrain,
18583 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
18584 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
18585 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
18586 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
18587 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
18588 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
18589 # and the reverse is actually true. Try it. -- esr)
18590 intertube|intertec|Intertec InterTube,
18593 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
18594 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
18595 ind=^J, rmso=\E0@, smso=\E0P,
18596 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
18597 # are typing and a command comes in, the keystrokes you type get interspersed
18598 # with the command and it messes up
18599 intertube2|intertec data systems intertube 2,
18601 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
18602 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
18603 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
18605 #### Ithaca Intersystems
18607 # This company made S100-bus personal computers long ago in the pre-IBM-PC
18608 # past. They used to be reachable at:
18610 # Ithaca Intersystems
18611 # 1650 Hanshaw Road
18612 # Ithaca, New York 14850
18614 # However, the outfit went bankrupt years ago.
18617 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
18618 # These entries were written (originally in termcap syntax) by Brian Yandell
18619 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
18620 # University of Wisconsin.
18622 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
18623 # removed <if=/usr/share/tabset/init.graphos> and
18624 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
18625 graphos|graphos III,
18627 cols#80, it#8, lines#24,
18628 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
18629 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18630 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18631 cuu=\E[%p1%dA, cuu1=\E[A,
18632 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
18633 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
18634 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18635 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
18636 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
18637 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
18638 smir=\E[4h, smso=\E[7m,
18639 graphos-30|graphos III with 30 lines,
18641 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
18645 # These people used to be reachable at:
18648 # 1393 Main Street,
18649 # Waltham, MA 02154
18650 # Vox: (617)-890-5796.
18652 # However, if you call that number today you'll get an insurance company.
18653 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
18654 # 26 Feb 1997 that says:
18656 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
18657 # for ~7 years. Modgraph still in business. Products are rugged laptop and
18658 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
18659 # panel-mount etc). I can be emailed at sonfour@aol.com
18661 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
18662 # dated 1984. According to the manual, it featured Tek 4010/4014
18663 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
18666 modgraph|mod24|modgraph terminal emulating vt100,
18669 cvvis=\E\^9;0s\E\^7;1s,
18670 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
18671 rf@, ri=\EM\E[K$<5/>, use=vt100,
18672 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
18673 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
18675 cols#80, it#8, lines#24,
18676 clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
18677 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
18678 ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
18679 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
18682 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
18683 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
18684 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
18685 # mark and using delete-to-killbuffer work correctly. However, we would
18686 # like normal mode of operation to be using a Modgraph with 48 line setting.
18687 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
18688 # the setting mark and delete-to-killbuffer results in the deletion of only
18689 # the line the mark is set on.
18690 # We've discovered that the delete-to-killbuffer works correctly
18691 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
18692 # the first line disappears but a ctrl-l shows that it did work
18694 modgraph48|mod|Modgraph w/48 lines,
18695 OTbs, OTpt, am, xenl,
18696 cols#80, it#8, lines#48, vt#3,
18697 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
18698 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
18699 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
18700 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
18701 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
18702 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18703 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
18704 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18705 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
18706 smso=\E[7m, smul=\E[4m,
18708 #### Morrow Designs
18710 # This was George Morrow's company. They started in the late 1970s making
18711 # S100-bus machines. They used to be reachable at:
18714 # 600 McCormick St.
18715 # San Leandro, CA 94577
18717 # but they're long gone now (1995).
18720 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
18721 # Jeff's specimen was dated June 1984.
18722 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
18723 mt70|mt-70|Morrow MD-70; native Morrow mode,
18724 am, mir, msgr, xon,
18725 cols#80, it#8, lines#24,
18726 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
18727 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
18728 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
18729 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
18730 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
18731 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
18732 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
18733 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
18734 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
18735 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
18736 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18737 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
18738 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
18739 smul=\EG1, tbc=\E0, use=adm+sgr,
18744 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
18746 ex155|Motorola Exorterm 155,
18748 OTkn#5, OTug#1, cols#80, lines#24,
18749 cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
18750 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
18751 home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
18752 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
18753 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
18757 # This company is still around in 1995, manufacturing point-of-sale systems.
18759 omron|Omron 8025AG,
18762 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
18763 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
18764 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
18768 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
18769 # were competition for things like the Tektronics 4025.
18772 # Ramtek 6221 from BRL, probably by Doug Gwyn
18773 # The following SET-UP modes are assumed for normal operation:
18774 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
18775 # NEWLINE_OFF 80_COLUMNS
18776 # Other SET-UP modes may be set for operator convenience or communication
18777 # requirements; I recommend
18778 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
18779 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
18780 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
18781 # Note that the Control-E key is useless on this brain-damaged terminal. No
18782 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18783 rt6221|Ramtek 6221 80x24,
18784 OTbs, OTpt, msgr, xon,
18785 OTkn#4, cols#80, it#8, lines#24, vt#3,
18786 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
18787 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
18788 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18789 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
18790 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
18791 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
18792 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18793 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
18794 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
18795 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
18796 rmso=\E[m, rmul=\E[m,
18797 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
18798 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
18799 smul=\E[4m, tbc=\E[3g,
18800 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
18801 rt6221-w|Ramtek 6221 160x48,
18802 cols#160, lines#48,
18803 ll=\E[48;1H, use=rt6221,
18808 # RCA VP3301 or VP3501
18809 rca|rca vp3301/vp3501,
18812 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18813 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
18819 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
18820 # The following SET-UP modes are assumed for normal operation:
18821 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
18822 # ONLINE ANSI CURSOR_VISIBLE
18823 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
18824 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
18825 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
18826 # For use with graphics software, all graphics modes should be set to factory
18827 # default. Other SET-UP modes may be set for operator convenience or
18828 # communication requirements. No delays are specified; use "stty ixon -ixany"
18829 # to enable DC3/DC1 flow control!
18830 # I commented out the scrolling capabilities since they are too slow.
18831 hirez100|Selanar HiREZ-100,
18832 OTbs, OTpt, mir, msgr, xon,
18833 OTkn#4, cols#80, it#8, lines#48, vt#3,
18834 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
18835 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18836 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18837 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
18838 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18839 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
18840 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
18841 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
18842 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
18843 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
18844 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18845 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
18846 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
18847 smul=\E[4m, tbc=\E[3g,
18848 hirez100-w|Selanar HiREZ-100 in 132-column mode,
18849 cols#132, use=hirez100,
18854 # From University of Wisconsin
18855 vsc|Signetics Vsc Video driver by RMC,
18857 cols#80, it#8, lines#26,
18858 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
18859 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18860 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
18861 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
18865 # Alan Frisbie <frisbie@flying-disk.com> writes:
18867 # As you may recall, the Soroc logo consisted of their name,
18868 # with the letter "S" superimposed over an odd design. This
18869 # consisted of a circle with a slightly smaller 15 degree (approx.)
18870 # wedge with rounded corners inside it. The color was sort of
18871 # a metallic gold/yellow.
18873 # If I had been more of a beer drinker it might have been obvious
18874 # to me, but it took a clue from their service department to make
18875 # me exclaim, "Of course!" The circular object was the top of
18876 # a beer can (the old removable pop-top style) and "Soroc" was an
18877 # anagram for "Coors".
18879 # I can just imagine the founders of the company sitting around
18880 # one evening, tossing back a few and trying to decide what to
18881 # call their new company and what to use for a logo.
18884 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
18885 soroc120|iq120|soroc|soroc iq120,
18886 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
18887 kcuf1=^L, kcuu1=^K, use=adm3a,
18888 soroc140|iq140|soroc iq140,
18891 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18892 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
18893 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
18894 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
18895 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18896 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
18897 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
18899 #### Southwest Technical Products
18901 # These guys made an early personal micro called the M6800.
18902 # The ct82 was probably its console terminal.
18905 # (swtp: removed obsolete ":bc=^D:" -- esr)
18906 swtp|ct82|southwest technical products ct82,
18909 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
18910 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
18911 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
18912 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
18913 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
18917 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
18919 # Synertek used to make ICs, various 6502-based single-board process
18920 # control and hobbyist computers, and assorted peripherals including a
18921 # series of small inexpensive terminals (I think they were one of the
18922 # first to have a "terminal-on-a-keyboard", where the terminal itself
18923 # was only slightly larger than the keyboard).
18925 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
18926 # was a 40x24 terminal that could connect to a standard TV through a
18927 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
18928 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
18929 # I have a KTM-2/80 still in working order. The KTM-2s had fully
18930 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
18931 # ROM and 2 ROMs as character generators. They were incredibly simple,
18932 # and I've never had any problems with mine (witness the fact that mine
18933 # was made in 1981 and is still working great... I've blown the video
18934 # output transistor a couple of times, but it's a 2N2222 :-)
18936 # The KTM-3 (which is what is listed in the terminfo file) was their
18937 # attempt at putting a KTM-2 in a box (and some models came with a
18938 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
18939 # control and escape sequences are very different. The KTM-3 was always
18940 # real broken, at least according to the folks I've talked to about it.
18942 # The padding in the entry is probably off--these terminals were very
18943 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
18944 # anyone with any sanity replaced the ROMs with something that provided
18945 # a reasonable subset of VT100 functionality, since the usual ROMs were
18946 # obviously very primitive... oh, you could get an upgraded ROM from
18947 # Synertek for some incredible amount of money, but what hacker with an
18948 # EPROM burner would do that? :)
18950 # Sorry I don't have any contact info; I believe they were located in
18951 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
18952 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
18953 # business these days.
18956 # Tested, seems to work fine with vi.
18957 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
18960 clear=^Z, cub1=^H, cuf1=^L,
18961 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
18963 #### Tab Office Products
18965 # TAB Products Co. - Palo Alto, California
18966 # Electronic Office Products,
18967 # 1451 California Avenue 94304
18969 # I think they're out of business.
18972 # The tab 132 uses xon/xoff, so no padding needed.
18973 # <smkx>/<rmkx> have nothing to do with arrow keys.
18974 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
18975 # Seems to be no way to get rid of status line.
18976 # The manual for this puppy was dated June 1981. It claims to be VT52-
18977 # compatible but looks more vt100-like.
18978 tab132|tab|tab132-15|tab 132/15,
18980 OTdN@, cols#80, lines#24, lm#96,
18981 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
18982 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
18983 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
18984 tab132-w|tab132 in wide mode,
18986 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
18987 tab132-rv|tab132 in reverse-video mode,
18988 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
18989 tab132-w-rv|tab132 in reverse-video/wide mode,
18990 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
18995 # Research Incorporated
18996 # 6425 Flying Cloud Drive
18997 # Eden Prairie, MN 55344
18998 # Vox: (612)-941-3300
19000 # The Teleray terminals were all discontinued in 1992-93. RI still services
19001 # and repairs these beasts, but no longer manufactures them. The Teleray
19002 # people believe that all the types listed below are very rare now (1995).
19003 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19004 # Model 100) that were ANSI-compatible.
19006 # Note two things called "teleray". Reorder should move the common one
19007 # to the front if you have either. A dumb teleray with the cursor stuck
19008 # on the bottom and no obvious model number is probably a 3700.
19011 t3700|dumb teleray 3700,
19014 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19015 t3800|teleray 3800 series,
19017 cols#80, it#8, lines#24,
19018 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19019 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19020 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19021 t1061|teleray|teleray 1061,
19022 OTbs, am, km, xhp, xt,
19023 cols#80, it#8, lines#24, xmc#1,
19024 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19025 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19026 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19027 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19028 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19029 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19030 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19032 t1061f|teleray 1061 with fast PROMs,
19033 dl1=\EM, il1=\EL, ip@, use=t1061,
19034 # "Teleray Arpa Special", officially designated as
19035 # "Teleray Arpa network model 10" with "Special feature 720".
19036 # This is the new (1981) fast microcode updating the older "arpa" proms
19037 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19038 # converts the keypad to programmable function keys, and has other goodies.
19039 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19040 # programs handle such lossage properly.
19041 # Note: this is NOT the old termcap's "t1061f with fast proms."
19042 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19043 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19044 t10|teleray 10 special,
19046 cols#80, it#8, lines#24, xmc#2,
19047 clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
19048 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19049 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19050 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19052 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19053 # back/forth words. Put the function keys (f1-f10) where they can be
19054 # found, and turn off the other magic keys along the top row, except
19055 # for line/local. Do the magic appropriate to make the page shifts work.
19056 # Also toggle ^S/^Q for those of us who use Emacs.
19058 am, da, db, mir, xhp, xt,
19060 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19061 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19062 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19063 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19064 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19065 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19066 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19067 smso=\E[7m, smul=\E[4m,
19069 #### Texas Instruments (ti)
19072 # The Silent 700 was so called because it was built around a quiet thermal
19073 # printer. It was portable, equipped with an acoustic coupler, and pretty
19074 # neat for its day.
19075 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19078 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19081 # Texas Instruments 916 VDT 7 bit control mode
19083 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19085 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19086 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19087 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19088 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19089 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19090 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19091 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19092 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19093 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19094 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19095 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19096 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19097 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19098 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19101 # Texas Instruments 916 VDT 8 bit control mode
19103 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19104 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19105 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19106 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19107 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19108 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19109 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19111 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19113 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19114 cols#132, use=ti916,
19116 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19118 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19119 cols#132, use=ti916-8,
19120 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19122 cols#80, it#8, lines#24,
19123 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19124 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19125 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19126 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19127 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19128 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19129 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19130 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19131 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19132 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19133 smul=\E[4m, tbc=\E[3g,
19134 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19136 cols#80, it#8, lines#24,
19137 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19138 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19139 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19140 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19141 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19142 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19143 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
19144 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
19145 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
19146 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
19147 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19148 smul=\E[4m, tbc=\E[3g,
19149 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
19150 cols#132, use=ti924,
19151 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
19152 cols#132, use=ti924-8,
19153 ti931|Texas Instruments 931 VDT,
19156 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
19157 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19158 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
19159 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
19160 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19161 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
19162 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
19163 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
19164 sgr0=\E4@, smso=\E4A, smul=\E4D,
19165 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
19166 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19167 # (ti926-8: I corrected this from the broken SCO entry -- esr)
19168 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
19169 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19170 ti_ansi|basic entry for ti928,
19171 am, bce, eo, xenl, xon,
19172 colors#8, cols#80, it#8, lines#25, pairs#64,
19173 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
19174 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19175 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19176 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19177 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19178 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
19179 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
19180 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
19181 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
19182 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
19183 smso=\E[7m, smul=\E[4m,
19185 # 928 VDT 7 bit control mode
19187 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
19188 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
19189 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
19190 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
19191 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
19192 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
19194 # 928 VDT 8 bit control mode
19196 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
19197 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
19198 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
19199 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
19200 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
19201 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
19202 kpp=\233T, kprt=\23335~, use=ti_ansi,
19207 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
19208 # had just <smso>=\EG6 which I think means standout was supposed to be
19209 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
19210 # <invis> might work-- esr)
19211 zen30|z30|zentec 30,
19214 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19215 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19216 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
19217 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
19218 smul@, use=adm+sgr,
19219 # (zen50: this had extension capabilities
19220 # :BS=^U:CL=^V:CR=^B:
19221 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
19222 # which were also in the original entry -- esr)
19223 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
19224 zen50|z50|zentec zephyr,
19226 cols#80, lines#24, xmc#1,
19227 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
19228 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
19229 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
19230 rmul@, smul@, use=adm+sgr,
19232 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
19233 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
19236 blink=\EM", clear=\EH\EJ, cnorm=\EP,
19237 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
19238 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19239 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
19240 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
19241 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
19242 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
19243 smso=\EM$, smul=\EM0,
19245 ######## OBSOLETE UNIX CONSOLES
19248 #### Apollo consoles
19250 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
19251 # labeled HP700s now.
19254 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
19255 apollo|apollo console,
19258 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
19259 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
19260 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
19261 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
19262 smso=\ES, smul=\EU, vpa=\EO+\s,
19264 # We don't know whether or not the apollo guys replicated DEC's firmware bug
19265 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
19266 # both these capabilities.
19267 apollo_15P|apollo 15 inch display,
19268 rmir@, smir@, use=vt132,
19269 apollo_19L|apollo 19 inch display,
19270 rmir@, smir@, use=vt132,
19271 apollo_color|apollo color display,
19272 rmir@, smir@, use=vt132,
19274 #### Convergent Technology
19276 # Burroughs bought Convergent shortly before it merged with Univac.
19277 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
19278 # from 1991 or earlier).
19281 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
19282 # (aws: removed unknown :dn=^K: -- esr)
19283 aws|Convergent Technologies AWS workstation under UTX and Xenix,
19285 OTug#0, cols#80, lines#28, xmc#0,
19286 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
19287 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
19288 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
19289 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
19290 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
19291 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
19293 awsc|Convergent Technologies AWS workstation under CTOS,
19295 OTug#0, cols#80, lines#24, xmc#0,
19296 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
19297 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
19298 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
19299 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
19305 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
19306 # The digital uVax II's had a graphic display called a qdss. It was
19307 # supposed to be a high performance graphic accelerator, but it was
19308 # late to market and barely appeared before faster dumb frame buffers
19309 # appeared. I have only used this display while running X11. However,
19310 # during bootup, it was in text mode, and probably had a terminal emulator
19311 # within it. And that is what your termcap entry is for. In graphics
19312 # mode the screen size is 1024x864 pixels.
19313 qdss|qdcons|qdss glass tty,
19315 cols#128, lines#57,
19316 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
19317 cup=\E=%p1%c%p2%c, cuu1=^K,
19319 #### Fortune Systems consoles
19321 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
19322 # in their day; I (esr) used one myself for a year or so around 1984.
19323 # They had no graphics, though, and couldn't compete against Suns and
19327 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
19328 # (This had extension capabilities
19329 # :rv=\EH:re=\EI:rg=0:GG=0:\
19330 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
19331 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
19332 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
19333 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
19334 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
19335 # to force both magic cookie glitches off. Once upon a time, I
19336 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
19337 # function keys; thus the "Al" value for HM was certainly an error. I renamed
19338 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
19339 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
19340 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
19341 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
19342 fos|fortune|Fortune system,
19345 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
19346 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
19347 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
19348 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
19349 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
19350 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
19351 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
19352 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
19353 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
19354 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
19355 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
19356 smso=^\H`, smul=^\HP,
19358 #### Masscomp consoles
19360 # Masscomp has gone out of business. Their product line was purchased by
19361 # comany in Georgia (US) called "XS International", parts and service may
19362 # still be available through them.
19365 # (masscomp: ":MT:" changed to ":km:"; -- esr)
19366 masscomp|masscomp workstation console,
19368 cols#80, it#8, lines#24,
19369 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
19370 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19371 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
19372 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
19373 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
19374 masscomp1|masscomp large screen version 1,
19375 cols#104, lines#36, use=masscomp,
19376 masscomp2|masscomp large screen version 2,
19377 cols#64, lines#21, use=masscomp,
19379 ######## OTHER OBSOLETE TYPES
19381 # These terminals are *long* dead -- these entries are retained for
19382 # historical interest only.
19385 #### Obsolete non-ANSI software emulations
19388 # CTRM terminal emulator
19389 # 1. underlining is not allowed with colors: first, is is simulated by
19390 # black on white, second, it disables background color manipulations.
19391 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
19392 # so we have to save their status in the static registers A, B and H
19393 # respectively, to be able to restore them when color changes
19394 # (because any color change turns off ALL attributes)
19395 # 3. <bold> and <rev> sequences alternate modes,
19396 # rather than simply entering them. Thus we have to check the
19397 # static register B and H to determine the status, before sending the
19399 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
19400 # and then reset colors
19401 # 5. implementation of the protect mode would badly penalize the performance.
19402 # we would have to use \E&bn sequence to turn off colors (as well as all
19403 # other attributes), and keep the status of protect mode in yet another
19404 # static variable. If someone really needs this mode, they would have to
19405 # create another terminfo entry.
19406 # 6. original color-pair is white on black.
19407 # store the information about colors into static registers
19408 # 7. set foreground color. it performs the following steps.
19409 # 1) turn off all attributes
19410 # 2) turn on the background and video attributes that have been turned
19411 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
19412 # 3) turn on foreground attributes
19413 # 4) store information about foreground into U,V,W static registers
19414 # 8. turn on background: similar to turn on foreground above
19415 ctrm|C terminal emulator,
19417 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
19418 pairs#63, pb#19200, vt#6,
19419 bel=^G, blink=\E&dA%{1}%PA,
19420 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
19421 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19422 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
19423 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
19424 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
19425 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
19426 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
19427 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
19428 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
19429 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
19430 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
19431 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
19432 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
19433 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
19434 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
19436 # gs6300 - can't use blue foreground, it clashes with underline;
19437 # it's simulated with cyan
19438 # Bug: The <op> capability probably resets attributes.
19439 # (gs6300: commented out <rmln> (no <smln>) --esr)
19440 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
19441 am, bce, msgr, xon,
19442 colors#8, cols#80, it#8, lines#24, pairs#63,
19443 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19444 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
19445 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19446 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19447 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19448 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19449 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
19450 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
19451 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
19452 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
19453 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
19454 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
19455 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
19456 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
19458 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
19459 # MS-Kermit with Heath-19 emulation mode enabled
19460 # (h19k: changed ":pt@:" to ":it@"
19461 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
19466 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
19467 # Software (formerly Peripherals Computers & Supplies, Inc) of
19468 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
19469 # also be reached at support@synergy.com.
19470 versaterm|versaterm vt100 emulator for the macintosh,
19472 cols#80, it#8, lines#24,
19473 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19474 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
19475 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
19476 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
19477 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
19478 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
19479 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
19480 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
19481 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
19482 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
19483 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
19484 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
19487 # From: Rick Thomas <ihnp4!btlunix!rbt>
19488 # (xtalk: I added <rmam>/<smam> based on the init string.
19489 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
19490 am, mir, msgr, xon,
19491 cols#80, it#8, lines#24, vt#3, xmc#1,
19492 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19493 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
19494 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19495 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19496 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
19497 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
19498 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
19499 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19500 rmkx=\E[?1l\E>, rmso=\E[m\s,
19501 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
19502 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
19503 tbc=\E[3g, use=vt100+fnkeys,
19505 # The official PC terminal emulator program of the AT&T Product Centers.
19506 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
19507 simterm|attpc running simterm,
19510 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19511 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
19512 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
19513 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
19515 #### Daisy wheel printers
19517 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
19518 # wheel terminals. These are now largely obsolete.
19521 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
19522 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
19525 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
19526 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
19527 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
19529 is2=\r \E9, use=diablo1620,
19530 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
19531 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
19532 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
19534 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
19536 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
19538 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
19539 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
19541 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
19542 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
19543 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
19544 # If no tab is set or the terminal's in a bad mood, it glitches the screen
19545 # around all of memory. Note that return puts a blank ("a return character")
19546 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
19547 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
19548 # curses won't work (some old BSD versions) because it doesn't clear this bit,
19549 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
19550 # I have been unable to get tabs set in all 96 lines - it always leaves at
19551 # least one line with no tabs in it, and once you tab through that line,
19552 # it completely weirds out.
19553 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
19556 cols#80, lines#24, lm#96,
19557 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
19558 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
19559 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
19560 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
19561 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
19565 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19566 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19567 gsi|mystery gsi terminal,
19570 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
19572 aj830|aj832|aj|anderson jacobson,
19574 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
19576 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
19577 aj510|Anderson-Jacobson model 510,
19580 clear=^L, cub1=^H, cuf1=\EX,
19581 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
19582 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
19583 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
19584 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
19585 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
19587 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
19588 # This is incomplete, but it's a start.
19589 nec5520|nec|spinwriter|nec 5520,
19592 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
19593 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
19595 qume5|qume|Qume Sprint 5,
19598 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19599 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19600 # I suspect the xerox 1720 is the same as the diablo 1620.
19601 xerox1720|x1720|x1750|xerox 1720,
19604 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
19607 #### Miscellaneous obsolete terminals, manufacturers unknown
19609 # If you have any information about these (like, a manufacturer's name,
19610 # and a date on the serial-number plate) please send it!
19612 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
19615 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
19616 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
19619 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
19620 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
19621 kf4=\E8, rmso=\Em^C, smso=\Em^L,
19622 cops10|cops|cops-10|cops 10,
19625 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19626 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
19627 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
19629 # (d132: removed duplicate :ic=\E5:,
19630 # merged in capabilities from a BRL entry -- esr)
19631 d132|datagraphix|datagraphix 132a,
19634 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
19635 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
19636 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
19637 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
19638 # The d800 was an early portable terminal from c.1984-85 that looked a lot
19639 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
19640 # mode (which is what this entry looks like) and several other lesser-known
19643 OTbs, am, da, db, msgr, xhp,
19644 cols#80, it#8, lines#24,
19645 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
19646 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
19647 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19648 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
19649 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
19650 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
19651 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19652 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
19653 digilog|digilog 333,
19656 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
19658 # The DWK was a terminal manufactured in the Soviet Union c.1986
19659 dwk|dwk-vt|dwk terminal,
19661 cols#80, it#8, lines#24,
19662 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
19663 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19664 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
19665 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
19666 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
19667 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
19668 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
19669 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
19670 sgr0=\EX, smacs=\EF, smso=\ET,
19671 env230|envision230|envision 230 graphics terminal,
19673 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
19674 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
19676 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
19677 # coupler attached, the whole rig fitting in a suitcase and more or less
19678 # portable. Hot stuff for c.1977 :-) -- esr
19679 ep48|ep4080|execuport 4080,
19682 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
19683 ep40|ep4000|execuport 4000,
19684 cols#136, use=ep4080,
19685 # Adam Thompson <athompso@pangea.ca> tells us:
19686 # Informer series - these are all portable units, resembling older
19687 # automatic bread-baking machines. The terminal looks like a `clamshell'
19688 # design, but isn't. The structure is similar to the Direct terminals,
19689 # but only half the width. The entire unit is only about 10" wide.
19690 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
19691 # keyboard. All the keys are crammed together, much like some laptop
19692 # PCs today, but perhaps less well organized...all these units have a
19693 # bewildering array of plugs on the back, including a built-in modem.
19694 # The 305 was a color version of the 304; the 306 and 307 were mono and
19695 # color terminals built for IBM bisync protocols.
19696 # From: Paul Leondis <unllab@amber.berkeley.edu>
19697 ifmr|Informer D304,
19700 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
19701 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
19702 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
19704 # Entry largely based on wy60 and has the features of wy60ak.
19705 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
19706 am, bw, hs, km, mir, msgr, ul, xon,
19707 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
19708 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19709 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
19710 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
19711 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
19712 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
19713 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
19715 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
19716 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
19717 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
19718 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
19719 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19720 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19721 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19722 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
19723 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
19724 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
19725 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
19726 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
19727 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
19728 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
19729 rs3=\EwG\Ee($<150>,
19730 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
19731 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
19732 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
19733 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
19734 uc=\EG8\EG0, use=adm+sgr,
19735 teletec|Teletec Datascreen,
19738 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
19740 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
19741 # This description is for the LANPAR Technologies VISION 3220
19742 # terminal from 1984/85. The function key definitions k0-k5 represent the
19743 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
19744 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
19746 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
19747 # I had a couple of scopes (3221) like this once where I used to work, around
19748 # the 1987 time frame if memory serves me correctly. These scopes were made
19749 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
19750 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
19751 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
19752 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
19753 # (3221) cost about $1500 each, and one was always broken -- had to be sent
19754 # back to the shop for repairs.
19755 # The only real advantage these scopes had over the VT-240's were:
19756 # 1) They were faster in the Regis display, or at least the ones I did
19757 # 2) They had a handy debugging feature where you could split-screen the
19758 # scope, the graphics would appear on the top, and the REGIS commands would
19759 # appear on the bottom. I don't remember the VT-240s being able to do that.
19760 # I would swear that LANPAR Technologies was in MA someplace, but since I
19761 # don't work at the same place anymore, and those terminals and manuals were
19762 # long since junked, I cannot be any more sure than that.
19764 # (v3220: removed obsolete ":kn#10:",
19765 # I added <rmam>/<smam> based on the init string -- esr)
19766 v3220|LANPAR Vision II model 3220/3221/3222,
19767 OTbs, am, mir, xenl,
19768 cols#80, it#8, lines#24,
19769 clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
19770 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19771 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
19772 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
19773 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
19774 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
19775 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
19776 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19777 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
19778 ######## ICH/ICH1 VERSUS RMIR/SMIR
19780 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
19781 # are present; the symptom is doubled characters in an update using insert.
19782 # These applications are technically correct; in both 4.3BSD termcap and
19783 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
19784 # unless the terminal needs both. To my knowledge, no terminal still in this
19785 # file requires both other than the very obsolete dm2500.
19787 # For ncurses-based applications this is not a problem, as ncurses uses
19788 # one or the other as appropriate but never mixes the two. Therefore we
19789 # have not corrected entries like `linux' and `xterm' that specify both.
19790 # If you see doubled characters from these, use the linux-nic and xterm-nic
19791 # entries that suppress ich/ich1. And upgrade to ncurses!
19794 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
19796 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
19797 # ECMA-48 standards are said to be almost identical, but are not the same
19798 # as X3.64 (though for practical purposes they are close supersets of it).
19800 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
19801 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
19802 # Coded Character Sets"), include your snail-mail address, and you should
19803 # receive the document in due course. Don't expect an email acknowledgement.
19805 # Related standards include "X3.4-1977: American National Standard Code for
19806 # Information Interchange" (the ASCII standard) and "X3.41.1974:
19807 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
19808 # American National Standard for Information Interchange." I believe (but
19809 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
19813 #### VT100/ANSI/ECMA-48
19815 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
19816 # and ECMA-48 Control Functions for Coded Character Sets.
19818 # Much of the content of this comment is adapted from a table prepared by
19819 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
19820 # discussion of some terminfo-related issues, and updates to capture ECMA-48
19821 # have been added. Control functions described in ECMA-48 only are tagged
19822 # with * after their names.
19824 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
19825 # sequences. In the main table, \E stands for an escape (\033) character,
19826 # SPC for space. Pn stands for a single numeric parameter to be inserted
19827 # in decimal ASCII. Ps stands for a list of such parameters separated by
19828 # semicolons. Parameter meanings for most parametrized sequences are
19829 # decribed in the notes.
19831 # Sequence Sequence Parameter or
19832 # Mnemonic Name Sequence Value Mode terminfo
19833 # -----------------------------------------------------------------------------
19834 # APC Applicatn Program Command \E _ - Delim -
19835 # BEL Bell * ^G - - bel
19836 # BPH Break Permitted Here * \E B - * -
19837 # BS Backpace * ^H - EF -
19838 # CAN Cancel * ^X - - - (A)
19839 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
19840 # CCH Cancel Previous Character \E T - - -
19841 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
19842 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
19843 # CMD Coding Method Delimiter * \E
19844 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
19845 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
19846 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
19847 # CSI Control Sequence Intro \E [ - Intro -
19848 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
19849 # CUB Cursor Backward \E [ Pn D 1 eF cub
19850 # CUD Cursor Down \E [ Pn B 1 eF cud
19851 # CUF Cursor Forward \E [ Pn C 1 eF cuf
19852 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
19853 # CUU Cursor Up \E [ Pn A 1 eF cuu
19854 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
19855 # DA Device Attributes \E [ Pn c 0 - -
19856 # DAQ Define Area Qualification \E [ Ps o 0 - -
19857 # DCH Delete Character \E [ Pn P 1 eF dch
19858 # DCS Device Control String \E P - Delim -
19859 # DL Delete Line \E [ Pn M 1 eF dl
19860 # DLE Data Link Escape * ^P - - -
19861 # DMI Disable Manual Input \E \ - Fs -
19862 # DSR Device Status Report \E [ Ps n 0 - - (I)
19863 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
19864 # EA Erase in Area \E [ Ps O 0 eF - (J)
19865 # ECH Erase Character \E [ Pn X 1 eF ech
19866 # ED Erase in Display \E [ Ps J 0 eF ed (J)
19867 # EF Erase in Field \E [ Ps N 0 eF -
19868 # EL Erase in Line \E [ Ps K 0 eF el (J)
19869 # EM End of Medium * ^Y - - -
19870 # EMI Enable Manual Input \E b Fs -
19871 # ENQ Enquire ^E - - -
19872 # EOT End Of Transmission ^D - * -
19873 # EPA End of Protected Area \E W - - - (K)
19874 # ESA End of Selected Area \E G - - -
19875 # ESC Escape ^[ - - -
19876 # ETB End Transmission Block ^W - - -
19877 # ETX End of Text ^C - - -
19878 # FF Form Feed ^L - - -
19879 # FNK Function Key * \E [ Pn SPC W - - -
19880 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
19881 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
19882 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
19883 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
19884 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
19885 # HPB Char Position Backward \E [ j 1 FE -
19886 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
19887 # HT Horizontal Tab * ^I - FE - (N)
19888 # HTJ Horz Tab w/Justification \E I - FE -
19889 # HTS Horizontal Tab Set \E H - FE hts
19890 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
19891 # ICH Insert Character \E [ Pn @ 1 eF ich
19892 # IDCS ID Device Control String \E [ SPC O - * -
19893 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
19894 # IL Insert Line \E [ Pn L 1 eF il
19895 # IND Index \E D - FE -
19896 # INT Interrupt \E a - Fs -
19897 # JFY Justify \E [ Ps SPC F 0 FE -
19898 # IS1 Info Separator #1 * ^_ - * -
19899 # IS2 Info Separator #1 * ^^ - * -
19900 # IS3 Info Separator #1 * ^] - * -
19901 # IS4 Info Separator #1 * ^\ - * -
19902 # LF Line Feed ^J - - -
19903 # LS1R Locking Shift Right 1 * \E ~ - - -
19904 # LS2 Locking Shift 2 * \E n - - -
19905 # LS2R Locking Shift Right 2 * \E } - - -
19906 # LS3 Locking Shift 3 * \E o - - -
19907 # LS3R Locking Shift Right 3 * \E | - - -
19908 # MC Media Copy \E [ Ps i 0 - - (S)
19909 # MW Message Waiting \E U - - -
19910 # NAK Negative Acknowledge * ^U - * -
19911 # NBH No Break Here * \E C - - -
19912 # NEL Next Line \E E - FE nel (D)
19913 # NP Next Page \E [ Pn U 1 eF -
19914 # NUL Null * ^@ - - -
19915 # OSC Operating System Command \E ] - Delim -
19916 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
19917 # PFS Page Format Selection * \E Pn SPC J 0 - -
19918 # PLD Partial Line Down \E K - FE - (T)
19919 # PLU Partial Line Up \E L - FE - (U)
19920 # PM Privacy Message \E ^ - Delim -
19921 # PP Preceding Page \E [ Pn V 1 eF -
19922 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
19923 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
19924 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
19925 # PTX Parallel Texts * \E [ \ - - -
19926 # PU1 Private Use 1 \E Q - - -
19927 # PU2 Private Use 2 \E R - - -
19928 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
19929 # REP Repeat Char or Control \E [ Pn b 1 - rep
19930 # RI Reverse Index \E M - FE - (V)
19931 # RIS Reset to Initial State \E c - Fs -
19932 # RM Reset Mode * \E [ Ps l - - - (W)
19933 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
19934 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
19935 # SCI Single-Char Introducer \E Z - - -
19936 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
19937 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
19938 # SD Scroll Down \E [ Pn T 1 eF rin
19939 # SDS Start Directed String * \E [ Pn ] 1 - -
19940 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
19941 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
19942 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
19943 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
19944 # SI Shift In ^O - - - (P)
19945 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
19946 # SL Scroll Left \E [ Pn SPC @ 1 eF -
19947 # SLH Set Line Home * \E [ Pn SPC U - - -
19948 # SLL Set Line Limit * \E [ Pn SPC V - - -
19949 # SLS Set Line Spacing * \E [ Pn SPC h - - -
19950 # SM Select Mode \E [ Ps h none - - (W)
19951 # SO Shift Out ^N - - - (Q)
19952 # SOH Start Of Heading * ^A - - -
19953 # SOS Start of String * \E X - - -
19954 # SPA Start of Protected Area \E V - - - (Z)
19955 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
19956 # SPH Set Page Home * \E [ Ps SPC G - - -
19957 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
19958 # SPL Set Page Limit * \E [ Ps SPC j - - -
19959 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
19960 # SR Scroll Right \E [ Pn SPC A 1 eF -
19961 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
19962 # SRS Start Reversed String * \E [ Ps [ 0 - -
19963 # SSA Start of Selected Area \E F - - -
19964 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
19965 # SSW Set Space Width * \E [ Pn SPC [ none - -
19966 # SS2 Single Shift 2 (G2 set) \E N - Intro -
19967 # SS3 Single Shift 3 (G3 set) \E O - Intro -
19968 # ST String Terminator \E \ - Delim -
19969 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
19970 # STS Set Transmit State \E S - - -
19971 # STX Start pf Text * ^B - - -
19972 # SU Scroll Up \E [ Pn S 1 eF indn
19973 # SUB Substitute * ^Z - - -
19974 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
19975 # SYN Synchronous Idle * ^F - - -
19976 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
19977 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
19978 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
19979 # TBC Tab Clear \E [ Ps g 0 FE tbc
19980 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
19981 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
19982 # TSS Thin Space Specification \E [ Pn SC E none FE -
19983 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
19984 # VPB Line Position Backward * \E [ Pn k 1 FE -
19985 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
19986 # VT Vertical Tabulation * ^K - FE -
19987 # VTS Vertical Tabulation Set \E J - FE -
19989 # ---------------------------------------------------------------------------
19993 # Some control characters are listed in the ECMA-48 standard without
19994 # being assigned functions relevant to terminal control there (they
19995 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
19996 # here anyway for completeness.
19998 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20000 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20001 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20002 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20003 # preserved the CHA abbreviation.
20005 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20006 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20007 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20008 # CHT abbreviation.
20010 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20012 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20015 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20016 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20017 # 5 = clear all char tabs, 6 = clear all line tabs.
20019 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20020 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20021 # Position Absolute" but retains the HVP abbreviation.
20023 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20026 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20027 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20028 # DSR, 6 = request CPR response.
20030 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20031 # 1 = clear from beginning, 2 = clear.
20033 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20035 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20037 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20038 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20039 # Position Relative" but retains the HPR abbreviation.
20041 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20044 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20045 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20046 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20047 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20048 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20049 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20050 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20051 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20052 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20053 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20054 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20055 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20056 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20057 # 61-65 = variable highlights for ideograms.
20059 # (P) SI is also called LSO, Locking Shift Zero.
20061 # (Q) SI is also called LS1, Locking Shift One.
20063 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20064 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20065 # Absolute' but retains the VPA abbreviation.
20067 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20068 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20069 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20070 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20071 # 7 = start relay to secondary aux device.
20073 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20076 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20079 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20081 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20082 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20083 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20084 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20085 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20086 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20087 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20088 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20089 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20090 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20091 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20092 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20093 # from ECMA-48's 5th edition but are listed here for reference.
20095 # (X) Select Alternate Presentation Variants is used only for non-Latin
20098 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20100 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20103 # ---------------------------------------------------------------------------
20107 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20108 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20110 # Delim a Delimiter
20112 # x/y identifies a character by position in the ASCII table (column/row)
20114 # eF editor function (see explanation)
20116 # FE format effector (see explanation)
20118 # F is a Final character in
20119 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20120 # a control sequence (F from 4/0 to 7/14)
20122 # Gs is a graphic character appearing in strings (Gs ranges from
20123 # 2/0 to 7/14) in the ASCII table
20125 # Ce is a control represented as a single bit combination in the C1 set
20126 # of controls in an 8-bit character set
20128 # C0 the familiar set of 7-bit ASCII control characters
20130 # C1 roughly, the set of control chars available only in 8-bit systems.
20131 # This is too complicated to explain fully here, so read Jim Fleming's
20132 # article in the February 1983 BYTE, especially pages 214 through 224.
20134 # Fe is a Final character of a 2-character Escape sequence that has an
20135 # equivalent representation in an 8-bit environment as a Ce-type
20136 # (Fe ranges from 4/0 to 5/15)
20138 # Fs is a Final character of a 2-character Escape sequence that is
20139 # standardized internationally with identical representation in 7-bit
20140 # and 8-bit environments and is independent of the currently
20141 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
20143 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
20146 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
20149 # Pn is a numeric parameter in a control sequence, a string of zero or
20150 # more characters ranging from 3/0 to 3/9 in the ASCII table
20152 # Ps is a variable number of selective parameters in a control sequence
20153 # with each selective parameter separated from the other by the code
20154 # 3/11 (which usually represents a semicolon); Ps ranges from
20155 # 3/0 to 3/9 and includes 3/11
20157 # * Not relevant to terminal control, listed for completeness only.
20159 # Format Effectors versus Editor Functions
20161 # A format effector specifies how following output is to be displayed.
20162 # An editor function allows you to modify the display. Informally
20163 # format effectors may be destructive; format effectors should not be.
20165 # For instance, a format effector that moves the "active position" (the
20166 # cursor or equivalent) one space to the left would be useful when you want to
20167 # create an overstrike, a compound character made of two standard characters
20168 # overlaid. Control-H, the Backspace character, is actually supposed to be a
20169 # format effector, so you can do this. But many systems use it in a
20170 # nonstandard fashion, as an editor function, deleting the character to the
20171 # left of the cursor and moving the cursor left. When Control-H is assumed to
20172 # be an editor function, you cannot predict whether its use will create an
20173 # overstrike unless you also know whether the output device is in an "insert
20174 # mode" or an "overwrite mode". When Control-H is used as a format effector,
20175 # its effect can always be predicted. The familiar characters carriage
20176 # return, linefeed, formfeed, etc., are defined as format effectors.
20178 # NOTES ON THE DEC VT100 IMPLEMENTATION
20180 # Control sequences implemented in the VT100 are as follows:
20182 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
20183 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
20185 # plus several private DEC commands.
20187 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
20189 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
20190 # Erase from beginning of line to cursor Esc [ 1 K
20191 # Erase line containing cursor Esc [ 2 K
20192 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
20193 # Erase from beginning of screen to cursor Esc [ 1 J
20194 # Erase entire screen Esc [ 2 J
20196 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
20197 # Esc [ 2 J, but this is wrong; the default is 0.
20199 # The VT100 responds to receiving the DA (Device Attributes) control
20201 # Esc [ c (or Esc [ 0 c)
20203 # by transmitting the sequence
20207 # where Ps is a character that describes installed options.
20209 # The VT100's cursor location can be read with the DSR (Device Status
20214 # The VT100 reports by transmitting the CPR sequence
20218 # where Pl is the line number and Pc is the column number (in decimal).
20220 # The specification for the DEC VT100 is document EK-VT100-UG-003.
20224 # Here is a description of the color and attribute controls supported in the
20225 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
20226 # terminal emulators for Intel boxes obey these. They are a proper subset
20227 # of the ECMA-48 escapes.
20229 # 0 all attributes off
20230 # 1 foreground bright
20232 # 5 blink on/background bright (not reliable with brown)
20234 # 8 set blank (non-display)
20235 # 10 set primary font
20236 # 11 set first alternate font (on PCs, display ROM characters 1-31)
20237 # 12 set second alternate font (on PCs, display IBM high-half chars)
20239 # Color attribute sets
20240 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
20241 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
20242 # Bright black becomes gray. Bright brown becomes yellow,
20243 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
20245 # * If the 5 attribute is on and you set a background color (40-47) it is
20246 # supposed to enable bright background.
20248 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
20249 # when you try to set a "bright brown" (yellow) background with attribute
20250 # 5 (you get a blinking yellow foreground instead). A few displays
20251 # (including the System V console) support an attribute 6 that undoes this
20252 # braindamage (this is required by iBCS2).
20254 # * Some older versions of ANSI.SYS have a bug that causes thems to require
20255 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
20258 #### Intel Binary Compatibility Standard
20260 # For comparison, here are the capabilities implied by the Intel Binary
20261 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
20262 # These recommendations are optional. IBCS2 allows the leading escape to
20263 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
20264 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
20265 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
20266 # terminfo entry are followed with the corresponding capability in parens:
20268 # CSI <n>k disable (n=0) or enable (n=1) keyclick
20269 # CSI 2h lock keyboard
20270 # CSI 2i send screen as input
20271 # CSI 2l unlock keyboard
20272 # CSI 6m enable background color intensity
20273 # CSI <0-2>c reserved
20274 # CSI <0-59>m select graphic rendition
20275 # CSI <n>;<m>H (cup) cursor to line n and column m
20276 # CSI <n>;<m>f cursor to line n and column m
20277 # CSI <n>@ (ich) insert characters
20278 # CSI <n>A (cuu) cursor up n lines
20279 # CSI <n>B (cud) cursor down n lines
20280 # CSI <n>C (cuu) cursor right n characters
20281 # CSI <n>D (cud) cursor left n characters
20282 # CSI <n>E cursor down n lines and in first column
20283 # CSI <n>F cursor up n lines and in first column
20284 # CSI <n>G (hpa) position cursor at column n-1
20285 # CSI <n>J (ed) erase in display
20286 # CSI <n>K (el) erase in line
20287 # CSI <n>L (il) insert line(s)
20288 # CSI <n>P (dch) delete characters
20289 # CSI <n>S (indn) scroll up n lines
20290 # CSI <n>T (rin) scroll down n lines
20291 # CSI <n>X (ech) erase characters
20292 # CSI <n>Z (cbt) back up n tab stops
20293 # CSI <n>` cursor to column n on line
20294 # CSI <n>a (cuu) cursor right n characters
20295 # CSI <n>d (vpa) cursor to line n
20296 # CSI <n>e cursor down n lines and in first column
20297 # CSI <n>g (cbt) clear all tabs
20298 # CSI <n>z make virtual terminal n active
20299 # CSI ?7h (smam) turn automargin on
20300 # CSI ?7l (rmam) turn automargin off
20301 # CSI s save cursor position
20302 # CSI u restore cursor position to saved value
20303 # CSI =<c>A set overscan color
20304 # CSI =<c>F set normal foreground color
20305 # CSI =<c>G set normal background color
20306 # CSI =<c>H set reverse foreground color
20307 # CSI =<c>I set reverse foreground color
20308 # CSI =<c>J set graphic foreground color
20309 # CSI =<c>K set graphic foreground color
20310 # CSI =<n>g (dispc) display n from alternate graphics character set
20311 # CSI =<p>;<d>B set bell parameters
20312 # CSI =<s>;<e>C set cursor parameters
20313 # CSI =<x>D enable/disable intensity of background color
20314 # CSI =<x>E set/clear blink vs. bold background
20315 # CSI 7 (sc) (sc) save cursor position
20316 # CSI 8 (rc) (rc) restore cursor position to saved value
20317 # CSI H (hts) (hts) set tab stop
20318 # CSI Q<n><string> define function key string
20319 # (string must begin and end with delimiter char)
20320 # CSI c (clear) clear screen
20322 # The lack of any specification for attributes in SGR (among other things)
20323 # makes this a wretchedly weak standard. The table above is literally
20324 # everything iBSC2 has to say about terminal escape sequences; there is
20325 # no further discussion of their meaning or how to set the parameters
20326 # in these sequences at all.
20329 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
20331 # The historical termcap file entries were written primarily in 4.4BSD termcap.
20332 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
20333 # with the extension names chosen for compatibility with the termcap names
20334 # assigned in System V terminfo. There are some variant extension sets out
20335 # there. We try to describe them here.
20337 # XENIX extensions:
20339 # The XENIX extensions include a set of function-key capabilities as follows:
20341 # code XENIX variable name terminfo name name clashes?
20342 # ---- ------------------- ------------- -----------------------
20344 # CR key_char_right
20345 # CW key_change_window create_window
20347 # HM key_home khome
20349 # LD key_delete_line kdl1
20350 # LF key_linefeed label_off
20351 # NU key_next_unlocked_cell
20352 # PD key_page_down knp
20354 # PN start_print mc5
20356 # PS stop_print mc4
20357 # PU key_page_up kpp pulse
20358 # RC key_recalc remove_clock
20359 # RF key_toggle_ref req_for_input
20360 # RT key_return kent
20361 # UP key_up_arrow kcuu1 parm_up_cursor
20363 # WR key_word_right
20365 # The XENIX extensions also include the following character-set and highlight
20368 # XENIX terminfo function
20369 # ----- -------- ------------------------------
20370 # GS smacs start alternate character set
20371 # GE rmacs end alternate character set
20372 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
20373 # bo blink begin blink (not used in /etc/termcap)
20374 # be end blink (not used in /etc/termcap)
20375 # bb blink glitch (not used in /etc/termcap)
20376 # it dim begin dim (not used in /etc/termcap)
20377 # ie end dim (not used in /etc/termcap)
20378 # ig dim glitch (not used in /etc/termcap)
20380 # Finally, XENIX also used the following forms-drawing capabilities:
20382 # single double type ASCII approximation
20383 # ------ ------ ------------- -------------------
20384 # GV Gv vertical line |
20385 # GH Gv horizontal line - _
20386 # G1 G5 top right corner _ |
20387 # G2 G6 top left corner |
20388 # G3 G7 bottom left corner |_
20389 # G4 G8 bottom right corner _|
20390 # GD Gd down-tick character T
20391 # GL Gl left-tick character -|
20392 # GR Gr right-tick character |-
20393 # GC Gc middle intersection -|-
20394 # GU Gu up-tick character _|_
20396 # These were invented to take advantage of the IBM PC ROM character set. One
20397 # can compose an acsc string from the single-width characters as follows
20398 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
20399 # When translating a termcap file, ncurses tic will do this automatically.
20400 # The double forms characters don't fit the SVr4 terminfo model.
20404 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
20405 # nonstandard capabilities. Its signature is the KM capability, used to name
20406 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
20407 # set. Comments in the original, and a little cross-checking with other AT&T
20408 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
20409 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
20410 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
20411 # cursor invisible), and CV=:ve: (make cursor normal).
20415 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
20416 # have the System V capabilities up to SVr1 level. After that, it supports
20417 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
20418 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
20419 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
20420 # HP binary format incompatible with SVr4's.
20424 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
20425 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
20426 # capabilities following prtr_non with the following special capabilties:
20427 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
20428 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
20429 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
20430 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
20431 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
20432 # renamed (to kcbt and kslt). The places in the box[12] capabilities
20433 # correspond to acsc chars, here is the mapping:
20435 # box1[0] = ACS_ULCORNER
20436 # box1[1] = ACS_HLINE
20437 # box1[2] = ACS_URCORNER
20438 # box1[3] = ACS_VLINE
20439 # box1[4] = ACS_LRCORNER
20440 # box1[5] = ACS_LLCORNER
20441 # box1[6] = ACS_TTEE
20442 # box1[7] = ACS_RTEE
20443 # box1[8] = ACS_BTEE
20444 # box1[9] = ACS_LTEE
20445 # box1[10] = ACS_PLUS
20447 # The box2 characters are the double-line versions of these forms graphics.
20448 # The AIX binary terminfo format is incompatible with SVr4's.
20450 # Iris console extensions:
20452 # HS is half-intensity start; HE is half-intensity end
20453 # CT is color terminal type (for Curses & rogue)
20454 # CP is color change escape sequence
20455 # CZ are color names (for Curses & rogue)
20457 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
20461 # There is a set of extended termcaps associated with something
20462 # called the "Terminal Control" or TC package created by MainStream Systems,
20463 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
20464 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
20465 # that flags color terminals.
20467 ######## CHANGE HISTORY
20469 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
20470 # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
20473 # This file contains all the capability information present in John Kunze's
20474 # last version of the termcap master file, except as noted in the change
20475 # comments at end of file. Some information about very ancient obsolete
20476 # capabilities has been moved to comments. Some all-numeric names of older
20477 # terminals have been retired.
20479 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
20480 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
20481 # used by BSD curses.
20483 # The 9.1.0 version of this file was translated from my lightly-edited copy of
20484 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
20485 # the purpose. Unless the ncurses tic implementation and the Lisp code were
20486 # making perfectly synchronized mistakes which I then failed to catch by
20487 # eyeball, the translation was correct and perfectly information-preserving.
20489 # Major version number bumps correspond to major version changes in ncurses.
20491 # Here is a log of the changes since then:
20493 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
20494 # * First terminfo master translated from 8.3.
20495 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
20496 # * Replaced Wyse entries with updated entries supplied by vendor.
20498 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
20499 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
20500 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
20501 # * Better XENIX keycap translation. Describe TC termcaps.
20502 # * Contact and history info supplied by Qume.
20503 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
20504 # * Raided the Shuford FTP site for recent termcaps/terminfos.
20505 # * Added information on X3.64 and VT100 standard escape sequences.
20506 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
20507 # * Added a correct X11R6 xterm entry.
20508 # * Fixed terminfo translations of padding.
20509 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
20510 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
20511 # * Added u6/u7/u8/u9 capabilities.
20512 # * Added PCVT entry.
20513 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
20514 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
20515 # to use reverse-video standout so Emacs will look right.
20516 # * Added el1 capability to ansi.
20517 # * Added smacs/rmacs to ansi.sys.
20519 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
20520 # * New mt70 entry.
20521 # * Added COPYRIGHTS AND OTHER DELUSIONS.
20522 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
20523 # smartvid & smarterm, ampex 175 & 219 & 232,
20524 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
20525 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
20526 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
20527 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
20528 # * Replaced the Perkin-Elmer entries with vendor's official ones.
20529 # * Restored the old minimal-ansi entry, luna needs it.
20530 # * Fixed some incorrect ip and proportional-padding translations.
20531 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
20532 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
20533 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
20534 # to force a particular height.
20535 # * Added beehive4 and reorganized other Harris entries.
20536 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
20537 # * Merged in DEC's official entries for its terminals. The only old
20538 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
20539 # * Replaced the translated BBN Bitgraph entries with purpose-built
20540 # ones from AT&T's SVr3.
20541 # * Replaced the AT&T entries with AT&T's official terminfos.
20542 # * Added teleray 16, vc415, cops10.
20543 # * Merged in many individual capabilities from SCO terminfo files.
20544 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
20546 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
20547 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
20548 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
20549 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
20550 # simterm, citoh and variants.
20551 # * Replaced sol entry with sol1 and sol2.
20552 # * Replaced Qume QVT and Freedom-series entries with purpose-built
20553 # terminfo entries.
20554 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
20555 # and dg200 entries using caps from from SCO.
20556 # * Added the usual set of function-key mappings to ANSI entry.
20557 # * Corrected xterm's function-key capabilities.
20558 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
20559 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
20560 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
20561 # * Fix in xterm entry, get the arrow keys right.
20562 # * Change some \0 escapes to \200.
20563 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
20564 # * Added apple (Videx card), adm1a, oadm31.
20565 # * Fixed malformed ampex csr.
20566 # * Fixed act4, cyb110; they had old-style prefix padding left in.
20567 # * Changed mandatory to advisory padding in many entries.
20568 # * Replaced HP entries up to hpsub with purpose-built ones.
20569 # * Blank rmir/smir/rmdc/smdc capabilities removed.
20570 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
20571 # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
20572 # * Replaced the Ann Arbor entries with SCO's, the init strings are
20573 # more efficient (but the entries otherwise identical).
20574 # * Added dg211 from Shuford archive.
20575 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
20576 # adm42-nl, pc52, gs6300, xerox820, uts30.
20577 # * Pull SCO's padding into vi200 entry.
20578 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
20579 # entries merged in from SCO's descriptions.
20580 # * Fixed old-style prefix padding on zen50, h1500.
20581 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
20582 # entry from SCO's description.
20583 # * Reorganized the special entries.
20584 # * Added lm#0 to cbunix and virtual entries.
20586 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
20587 # * Restored cdc456tst.
20588 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
20589 # * Added megatek, beacon, microkit.
20590 # * Freeze for ncurses-1.9 release.
20591 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
20592 # * Added historical data for TAB.
20593 # * Comment fixes from David MacKenzie.
20594 # * Added the new BSDI pc3 entry.
20595 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
20596 # * A change in the tic -C logic now ensures that all entries in
20597 # the termcap translation will fit in < 1024 bytes.
20598 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
20599 # from GNU termcap file. This merges in all their local information.
20600 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
20601 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
20602 # * Added warnings about entries with long translations (restoring
20603 # all the GNU termcaps pushes a few over the edge).
20604 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
20605 # * Yet another tic change, and a couple of entry tweaks, to reduce the
20606 # number of long (> 1024) termcap translations back to 0.
20608 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
20609 # * Added kf13-kf20 to Linux entry.
20610 # * Regularize Prime terminal names.
20611 # * Historical data on Synertek.
20612 # * Freeze for ncurses-1.9.1.
20613 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
20614 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
20615 # * Eliminate whitespace in short name fields, this tanks some scripts.
20616 # * Name field changes to shorten some long entries.
20617 # * Termcap translation now automatically generates empty rmir/smir
20618 # when ich1/ich is present (copes with an ancient vi bug).
20619 # * Added `screen' entries from FSF's screen-3.6.2.
20620 # * Added linux-nic and xterm-nic entries.
20621 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
20622 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
20623 # eliminating some special-case code in ncurses.
20625 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
20626 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
20627 # that captures everything unique from it.
20628 # * Added reorder script generator.
20629 # * Freeze for ncurses 1.9.2 release.
20630 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
20631 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
20632 # * Added Olaf Siebert's corrections for adm12.
20633 # * ansi-pc-color now includes the colors and pairs caps, so that
20634 # entries which use it will inherit them automatically.
20635 # * The linux entry can now recognize the center (keypad 5) key.
20636 # * Removed some junk that found its way into Linux acsc.
20638 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
20639 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
20640 # * xterm doesn't try to use application keypad mode any more.
20641 # * Freeze for ncurses-1.9.3 release.
20642 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
20643 # * Added corrected sun entry from vendor.
20644 # * Added csr capability to linux entry.
20645 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
20646 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
20647 # * Some commented-out caps in long entries come back in, my code
20648 # for computing string-table lengths had a bug in it.
20649 # * pcansi series modified to fit comm-program reality better.
20650 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
20651 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
20652 # * Correct some bad aliases in the pcansi series
20653 # * Added entry for QNX console.
20654 # * Clean up duplicate long names for use with 4.4 library.
20655 # * Change vt100 standout to be normal reverse vide, not bright reverse;
20656 # this makes the Emacs status line look better.
20657 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
20658 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
20659 # * Minor surgery, mostly on name strings, to shorten termcap version.
20661 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
20662 # * Added dec-vt100 for use with the EWAN emulator.
20663 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
20664 # * Freeze for 1.9.5 alpha release.
20665 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
20666 # * Changed xterm lines to 24, the X11R6 default.
20667 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
20668 # * Added 7 newly discovered, undocumented acsc characters to linux
20669 # entry (the pryz{|} characters).
20670 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
20671 # * Correct two typos in the xterm entries introduced in 9.9.1.
20672 # * I finally figured out how to translate ko capabilities. Done.
20673 # * Added tvi921 entries from Tim Theisen.
20674 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
20675 # * Removed mystery tec entry, it was neither interesting nor useful.
20676 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
20677 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
20678 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
20679 # by making them relative to use capabilities
20680 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
20681 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
20682 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
20684 # * Translate all home=\E[;H capabilities to home=\E[H, they're
20686 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
20687 # vt100 and ANSI-like terminals.
20688 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
20689 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
20690 # does this now, too.
20691 # * fviewpoint is gone, it duplicated screwpoint.
20692 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
20693 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
20694 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
20695 # The UW vi50 replaces the old one, which becomes vi50adm,
20696 # * No more embedded commas in name fields.
20698 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
20699 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
20700 # * Introduced klone+* entries for describing Intel-console behavior.
20701 # * Linux kbs is default-mapped to delete for some brain-dead reason.
20702 # * -nsl -> -ns. The -pp syntax is obsolete.
20703 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
20704 # * Make xterm entry do application-keypad mode again. I got complaints
20705 # that it was messing up someone's 3270 emulator.
20706 # * Added some longname fields in order to avoid warning messages from
20707 # older tic implementations.
20708 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
20709 # it! (This gives us pi, greater than, less than, and a few more.)
20710 # * Freeze for ncurses-1.9.6 release.
20711 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
20712 # * Add xon to a number of console entries, they're memory-mapped and
20713 # don't need padding.
20714 # * Correct the use dependencies in the ansi series.
20715 # * Hand-translate more XENIX capabilities.
20716 # * Added hpterm entry for HP's X terminal emulator.
20717 # * Added aixterm entries.
20718 # * Shortened four names so everything fits in 14 chars.
20720 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
20721 # * Added ibcs2 entry and info on iBCS2 standard.
20722 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
20723 # * We can handle the HP meml/memu capability now.
20724 # * Added smacs to klone entries, just as documentation.
20725 # * Carrected ansi.sys and cit-500 entries.
20726 # * Added z39, vt320-k311, v220c, and avatar entries.
20727 # * Make pcansi use the ansi.sys invis capability.
20728 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
20729 # tvi925, tvi950, dt80, ncr7900i, h19.
20730 # * X3.64 has been withdrawn, change some references.
20731 # * Removed function keys from ansi-m entry.
20732 # * Corrected ansi.sys entry.
20733 # * Freeze for ncurses-1.9.7 release.
20734 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
20735 # * Added rmam/smam capabilities to many entries based on init strings.
20736 # * Added correct hpa/vpa to linux.
20737 # * Reduced several entries relative to vt52.
20738 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
20739 # * Exiled some utterly unidentifiable custom and homebrew types to the
20740 # UFO file; also, obsolete small-screen hardware; also, entries which
20741 # look flat-out incorrect, garbled, or redundant. These include the
20742 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
20743 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
20744 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
20745 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
20746 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
20747 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
20748 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
20749 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
20750 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
20751 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
20752 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
20753 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
20754 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
20755 # * Corrected pcvt25h as suggested by Brian C. Grayson
20756 # <bgrayson@pine.ece.utexas.edu>.
20757 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
20758 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
20759 # * Added kent=\EOM to xterm entry.
20761 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
20762 # * Corrected gigi entry.
20763 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
20764 # bad hpa/vpa capabilities.
20765 # * Corrected flash strings to have a uniform delay of .2 sec. No
20766 # more speed-dependent NUL-padding!
20767 # * terminfo capabilities in comments bracketed with <>.
20768 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
20769 # * Replaced pcvt with the 3.31 pcvt entries.
20770 # * Freeze for 1.9.7a.
20771 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
20772 # * Added emu entry from the X11R6 contrib tape sources.
20774 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
20775 # * Improved iris-ansi and sun entries.
20776 # * More flash string improvements.
20777 # * Corrected wy160 & wy160 as suggested by Robert Dunn
20778 # * Added dim to at386.
20779 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
20780 # he's ready to start using the termcap generated from this one.
20781 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
20782 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
20783 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
20784 # att610, att620, att630,
20785 # * Changed hazeltine name prefix from h to hz.
20786 # * Sent t500 to the UFI file.
20787 # * I think we've sucked all the juice out of BSDI's termcap file now.
20788 # * Freeze for ncurses 1.9.8 release
20789 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
20790 # * Unfreeze, linux kbs needed to be fixed.
20791 # * Tim Theisen pinned down a bug in the DMD firmware.
20792 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
20793 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
20794 # (The broken ones had been shadowed by sgr.)
20795 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
20796 # * Added documentation on ECMA-48 standard.
20797 # * New Amiga entry.
20798 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
20799 # * More ECMA-48 stuff
20800 # * Corrected typo in minix entry, added pc-minix.
20801 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
20802 # * Added rxvt entry.
20803 # * Added 1.3.x color-change capabilities to linux entry.
20804 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
20805 # * Corrected rxvt entry khome/kend.
20806 # * Corrected linux color change capabilities.
20807 # * NeXT entries from Dave Wetzel.
20808 # * Cleaned up if and rf file names (all in /usr/share now).
20809 # * Changed linux op capability to avoid screwing up a background color
20810 # pair set by setterm.
20811 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
20812 # * Added xterm-sun.
20813 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
20816 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
20817 # * Another sweep through the Shuford archive looking for new info.
20818 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
20819 # * Added st52 from Per Persson.
20820 # * Added eterm from the GNU Emacs 19.30 distribution.
20821 # * Freeze for 1.9.9.
20822 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
20823 # * FreeBSD console entries from Andrew Chernov.
20824 # * Removed duplicate Atari st52 name.
20825 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
20826 # * xterm doesn't actually have ACS_BLOCK.
20827 # * Change klone+color setf/setb to simpler forms that can be
20828 # translated into termcap.
20830 # * Removed mechanically-generated junk capabilities from cons* entries.
20831 # * Added color support to bsdos.
20832 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
20833 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
20834 # * Created ecma+color, linux can use it. Also added ech to linux.
20835 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
20836 # * Add descriptions to FreeBSD console entries. Also shorten
20837 # some aliases to <= 14 chars for portability.
20838 # * Added x68k console
20839 # * Added OTbs to several VT-series entries.
20840 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
20841 # * screen entry update for 3.7.1 from Michael Alan Dorman.
20842 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
20843 # * kterm correction due to Kenji Rikitake.
20844 # * ACS correction in vt320-kll due to Phillippe De Muyter.
20845 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
20846 # * Sun console entry correction from J.T. Conklin.
20847 # * Changed all DEC VT300 and up terminals to use VT300 tab set
20848 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
20849 # * Added smul to linux entry (we never noticed it was missing
20850 # because of sgr!).
20851 # * Added rmln to hp+labels (deduced from other HP entries).
20852 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
20853 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
20854 # * Corrected vt220 acsc.
20855 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
20856 # this corresponds to reality and helps prevent some tic warnings.
20857 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
20858 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
20859 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
20860 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
20861 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
20862 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
20863 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
20864 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
20865 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
20866 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
20867 # ifmr, v3220, wy100q, tandem653, ibmaed.
20868 # * Added DWK terminal description.
20869 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
20870 # * Many entries now have highlights inherited from adm+sgr.
20871 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
20872 # * xtitle and xtitle-twm enable access to the X status line.
20873 # * Added linux-1.3.6 color palette caps in conventional format.
20874 # * Added adm1178 terminal.
20875 # * Move fos and apollo terminals to obsolete category.
20876 # * Aha! The BRL terminals file told us what the Iris extensions mean.
20877 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
20878 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
20880 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
20881 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
20882 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
20883 # * Corrected, from BRL termcap file: vi50.
20884 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
20885 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
20886 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
20887 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
20888 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
20889 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
20890 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
20891 # * Paired-attribute fixes to various terminals.
20892 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
20893 # * xterm entry corrections from Thomas Dickey.
20894 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
20895 # * Added t916 entry, translated from a termcap in SCO's support area.
20896 # * New qnx entry from Michael Hunter.
20897 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
20898 # * Added hpex2 from Ville Sulko.
20899 # * Fixed a bug that ran the qnx and pcvtXX together.
20900 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
20901 # * Added dtterm entry from Solaris CDE.
20902 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
20903 # * corrected pairs#8 typo in dtterm entry.
20905 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
20906 # * updated xterm entry to cover 3.1.2E's new features.
20907 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
20908 # * Added new minix entry
20909 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
20910 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
20911 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
20912 # * Added Prism entries and kt7ix.
20913 # * Caution notes about EWAN and tabset files.
20914 # * Changed /usr/lib/tabset -> /usr/share/tabset.
20915 # * Added acsc/rmacs/smacs to vt52.
20916 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
20917 # * Merged in Thomas Dickey's reorganization of the xterm entries;
20918 # added technical corrections to avoid warning messages.
20919 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
20920 # * Added rmso=\E[27m in Linux entry.
20921 # * Added koi8-r support for Linux console.
20922 # * Replace xterm entries with canonical ones from XFree86 3.2.
20923 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
20924 # * Added color_xterm from Jacob Mandelson
20925 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
20926 # * Back off the xterm entry to use r6 as a base.
20927 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
20928 # * Added dec-vt220 at Adrian Garside's request.
20930 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
20932 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
20933 # * Minor corrections to xterm entries.
20934 # * Replaced EWAN telnet entry.
20935 # * Dropped the reorder script generator. It was a fossil.
20936 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
20937 # * Replaced minitel-2 entry.
20938 # * Added MGR, ansi-nt.
20939 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
20940 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
20941 # the 4.4BSD Lite2 file.
20943 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
20944 # * Use setaf/setab consistently with SVr4.
20945 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
20946 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
20947 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
20948 # * add xterm-16color, for XFree86 3.3
20949 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
20950 # * correct typo in emu
20951 # * correct typo in vt102-w (Robert Wuest)
20952 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
20953 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
20954 # * remove ech capability from rxvt (it does the wrong thing)
20955 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
20956 # * remove spurious newlines from several entries (hp+color, wy50,
20957 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
20959 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
20960 # * correct rmso capability of wy50-mc
20961 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
20962 # * add cbt to xterm-xf86-v32
20963 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
20964 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
20965 # other capabilities not in xterm-r6.
20966 # * remove alternate character set from kterm entry.
20967 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
20968 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
20969 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
20970 # * add xterm-8bit entry.
20971 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
20972 # * repair several places where early version of tic replaced \, with \\\,
20973 # * make acsc entries canonical form (sorted, uniq).
20974 # * modify acsc entries for linux, linux-koi8
20975 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
20976 # * add color, mouse support to kterm.
20977 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
20978 # * correct wy120 smxon/tbc capabilities which were stuck together.
20979 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
20980 # * add entry for xterm-xf86-v39t
20981 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
20982 # * add u8,u9 to sun-il description
20983 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
20984 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
20986 # * add hds200 description (Walter Skorski)
20987 # * add EMX 0.9b descriptions
20988 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
20989 # * rename xhpterm back to hpterm.
20990 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
20991 # * change initc in linux-c-nc to use 0..1000 range.
20992 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
20993 # * remove hpa/vpa from rxvt, which implements them incorrectly.
20994 # * add sgr0 for rxvt.
20995 # * remove bogus smacs/rmacs from EMX descriptions.
20996 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
20997 # * revised entry for att7300
20998 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
20999 # * use \0 rather than \200.
21000 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21001 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21002 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21003 # * rename xterm-xf86-v39t to xterm-xf86-v40
21004 # * remove bold/underline from sun console entries since they're not
21006 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21007 # * add beterm entry (Fred Fish)
21008 # * add irix-color/xwsh entry.
21009 # * turn ncv off for linux.
21010 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21011 # * set ncv for FreeBSD console (treat colors with reverse specially).
21012 # * remove sgr string from qnx based on report by Xiaodan Tang
21013 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21014 # * remove spurious commas from descriptions
21015 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21016 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21017 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21018 # apparently based on cp-866).
21020 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21022 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21023 # * Replaced minitel-2 entry.
21024 # * Added MGR, ansi-nt.
21025 # * Minor corrections to xterm entries.
21026 # * Replaced EWAN telnet entry.
21027 # * Dropped the reorder script generator. It was a fossil.
21028 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21029 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21030 # the 4.4BSD Lite2 file.
21031 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21032 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21033 # * Updated iris-ansi; corrected vt102-w.
21034 # * Switch base xterm entry to 3.3 level.
21035 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21037 # * Removed rmir/smir from tv92B.
21039 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21040 # * add hds200 description (Walter Skorski)
21041 # * add beterm entry (Fred Fish)
21042 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21043 # iris-color entries.
21044 # * add emx entries.
21045 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
21046 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
21048 # * remove sgr string from qnx based on report by Xiaodan Tang
21049 # * Added u8/u9, removed rmul/smul from sun-il.
21050 # * 4.2 tic displays \0 rather than \200.
21051 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21052 # apparently based on cp-866).
21053 # * Merged in Pavel Roskin's acsc for linux-koi8
21054 # * Corrected some erroneous \\'s to \.
21055 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21056 # * II -> ii in pcvtXX, screen, xterm.
21057 # * Removed \n chars following ANSI escapes in sgr & friends.
21058 # * Updated Wyse entries.
21059 # * h19 corrections from Tim Pierce.
21060 # * Noted that the dm2500 has both ich and smir.
21061 # * added pccons for the Alpha under OSF/1.
21062 # * Added Sony NEWS workstation entries and cit101e-rv.
21063 # * Reverted `amiga'; to Kent Polk's version, as I'm told
21064 # the Verkuil entry messes up with Amiga Telnet.
21065 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
21066 # * Corrected attributions in 10.2.0 release notes.
21067 # * Scanned the Shuford archive for new terminfos and information.
21068 # * Removed sgr from qnx entry (Thomas Dickey).
21069 # * Added entries for ICL and Kokusai Data Systems terminals.
21070 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
21071 # * Incorporated att700 from the Boundless Technology FTP site.
21072 # * Miscellaneous contact-address and Web-page updates.
21074 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
21077 # * add nxterm and xterm-color terminfo description (request by Cristian
21078 # Gafton <gafton@redhat.com>).
21079 # * modify rxvt terminfo description to clear alternate screen before
21080 # switching back to normal screen, for compatibility with applications
21081 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21082 # * modify linux terminfo description to reset color palette (reported
21083 # by Telford Tendys <telford@eng.uts.edu.au>).
21086 # * merge changes from current XFree86 xterm terminfo descriptions.
21089 # * Added minitel1 entries from Alexander Montaron.
21090 # * Added qnxt2 from Federico Bianchi.
21091 # * Added arm100 terminfo entries from Dave Millen.
21094 # * Added ncsa telnet entries from Francesco Potorti
21097 # * modify ncsa telnet entry to reflect color, other capabilities based on
21098 # examination of the source code - T.Dickey.
21101 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
21104 # * Added Francesco Potorti's tuned Wyse 99 entries.
21105 # * dtterm enacs correction from Alexander V. Lukyanov.
21106 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
21107 # * correct a typo in icl6404 entry.
21108 # * add xtermm and xtermc
21111 # * format most %'char' sequences to %{number}
21112 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
21113 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
21116 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
21117 # * correct initialization string in xterm-r5, add misc other features
21118 # to correspond with xterm patch 84 - TD
21121 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
21122 # * add Mathew Vernon's mach console entries
21123 # * corrections for ncsa function-keys (report by Larry Virden)
21126 # * change linux to use ncv#2, since underline does not work with color - TD
21129 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
21130 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21131 # application modes, change kent to use the correct keypad code - TD
21134 # * add entry for Tera Term - TD
21137 # * minor improvements for teraterm entry - TD
21138 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
21139 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
21142 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
21143 # xterm and ncsa entries by removing the unneeded ones. Note that
21144 # some entries will return kend & khome versus kslt and kfnd, for
21145 # PC-style keyboards versus strict vt220 compatiblity - TD
21148 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
21150 # * add 'crt' entry - TD
21151 # * correct typos in 'linux-c' entry - TD
21154 # * update entries for BSD/OS console to use klone+sgr and klone+color
21155 # (Jeffrey C Honig)
21158 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
21161 # * add linux-lat, from RedHat patches to ncurses 4.2
21164 # * add complete set of default function-key definitions for scoansi - TD.
21167 # * add cnorm, cvvis for Linux 2.2 kernels
21170 # * add kmous to xterm-r5 -TD
21171 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
21172 # parent "use" clause -TD
21175 # * corrected cnorm, added el1 in 'screen' description -TD
21178 # * add ms-vt100 -TD
21181 # * corrections to beterm entry -TD
21184 # * add cygwin entry -TD
21187 # * minor corrections for beterm entry -TD
21190 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
21193 # * add amiga-8bit entry
21194 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
21195 # rcons-color, based on
21196 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
21197 # * add alias for iris-ansi-net
21200 # * corrected scoansi entry's acsc, some function keys, add color -TD
21203 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
21204 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
21205 # key mapping, leaving Potorti's entries more like he named them -TD
21206 # * remove enter/exit am-mode from cygwin -TD
21209 # * correct typos in several entries (missing '[' from CSI):
21210 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
21211 # strings for avt-ns -TD
21212 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
21215 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
21216 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
21217 # * add xterm-88color and xterm-256color -TD
21220 # * add "obsolete" termcap strings -TD
21221 # * add kvt and gnome entries -TD
21224 # * correct cup string for regent100 -TD
21227 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
21228 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
21229 # * change OTrs capabilities to rs2 -TD
21230 # * add obsolete and extended capabilities to 'screen' -TD
21233 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
21235 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
21236 # and adding kcbt -TD
21239 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
21240 # nonstandard resource settings -TD
21243 # * minor fixes for xterm-*, based on Debian #58530 -TD
21246 # * add several terminal types from esr's "11.0", as well as comments.
21247 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
21248 # vt220-8bit, vt220-old, wy85-8bit
21251 # * add several terminal types from esr's "11.0.1" (ansi-*).
21252 # * update OTxx capabilities for changes on 2000/3/4.
21253 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
21256 # * move screen's AX extension to ecma+color, modify several entries to
21257 # use that, adjusting ncv as needed -TD
21260 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
21261 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
21262 # in esr's version.
21265 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
21266 # * correct color definition for ibm3164, make minor changes to other
21267 # IBM terminal definitions based on recent terminfo descriptions -TD
21270 # * add mgterm, from NetBSD -TD
21271 # * add alias sun-cgsix for sun-ss5 as per NetBSD
21272 # * change cons25w to use rs2 for reset rather than rs1 -TD
21273 # * add rc/sc to aixterm based on manpage -TD
21276 # * remove ncv from xterm-16color, xterm-256color
21279 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
21282 # * add Eterm (Michael Jennings)
21285 # * add amiga-vnc entry.
21288 # * correct description of Top Gun Telnet.
21289 # * add kterm-color
21292 # * add qansi* entries from QNX ftp site.
21295 # * add Matrix Orbital entries by Eric Z. Ayers).
21296 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
21300 # * add S0, E0 extensions to screen's entry -TD
21303 # * several corrections based on tic's new parameter-checking code -TD
21304 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
21305 # bracketing sequences that reset video attributes (\E8 would restore
21309 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
21312 # * improved scoansi, based on SCO man-page, and testing console,
21313 # scoterm with tack -TD
21316 # * modify kterm to use acsc via SCS controls.
21319 # * screen 3.9.8 allows xterm mouse controls to pass-through
21322 # * remove spurious "%|" from some xterm entries.
21325 # * modify 'screen' khome/kend to match screen 3.09.08
21326 # * add examples of 'screen' customization (screen.xterm-xfree86,
21327 # screen.xterm-r6, screen.teraterm) -TD
21330 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
21331 # * add "Apple_Terminal" entries -Benjamin Sittler
21332 # * remove time-delays from "Apple_Terminal" entries -TD
21333 # * make sgr entries time-delays consistent with individual caps -TD
21336 # * corrected/updated screen.xterm-xfree86
21339 # * ELKS descriptions, from Federico Bianchi
21340 # * add u6 (CSR) to Eterm (Michael Jennings).
21343 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
21344 # tic which handles names no longer than 14 characters. Add
21345 # corresponding descriptions for the Darwin PowerPC console named
21346 # "xnuppc" -Benjamin Sittler
21349 # * change kbs in mach entries to ^? (Marcus Brinkmann).
21352 # * add "putty" entry -TD
21353 # * updated "Apple_Terminal" entries -Benjamin Sittler
21356 # * add ms-vt100-color entry -TD
21357 # * add "konsole" entries -TD
21360 # * update gnome entry to Redhat 7.2 -TD
21363 # * add kf13-kf48 strings to cons25w -TD
21364 # * add pcvt25-color entry -TD
21365 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
21366 # * improve some features of scoansi entry based on SCO's version -TD
21367 # * add scoansi-new entry corresponding to OpenServer 5.0.6
21370 # * add kcbt to screen entry -TD
21373 # * add rxvt-16color, ibm+16color, mvterm entries -TD
21376 # * split out linux-basic entry, making linux-c inherit from that, and
21377 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
21378 # the history of this console type -TD
21379 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
21380 # r/g/b parameters of initc are in the range 0 to 1000 -TD
21383 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
21386 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
21387 # in the latter -TD
21390 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
21391 # * ncr260wy350pp has only 16 color pairs -TD
21392 # * add sun-type4 from NetBSD -TD
21393 # * update xterm-xfree86 to current (patch 170) -TD
21394 # * add screen-bce, screen-s entries -TD
21395 # * add xterm-1002, xterm-1003 entries -TD
21398 # * update homepage for Top Gun Telnet/SSH
21401 # * reduce duplication in emx entries, added emx-base -TD
21404 # * corrected acs for screen.teraterm -TD
21405 # * add tkterm entry -TD
21408 # * cygwin changes from Charles Wilson:
21409 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
21410 # primary instead of nxterm, to match XFree86's xterm.terminfo
21411 # usage and to prevent circular links.
21412 # (rxvt): add additional codes from rxvt.org.
21413 # (rxvt-color): new alias
21414 # (rxvt-xpm): new alias
21415 # (rxvt-cygwin): like rxvt, but with special acsc codes.
21416 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
21417 # with a "native" MSWin GUI. Each takes different acsc codes,
21418 # which are both different from the "normal" rxvt's acsc.
21419 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
21420 # (cygwinDBG): ditto.
21423 # * update gnome terminal entries -TD
21426 # * add entries for djgpp 2.03 and 2.04 -TD
21429 # * add alias for vtnt -TD
21430 # * update xterm-xfree86 for XFree86 4.4 -TD
21433 # * add linux-vt (Andrey V Lukyanov)
21436 # * add screen.linux -TD
21439 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
21442 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
21443 # * add vt100+ and vt-utf8 entries -TD
21444 # * add uwin entry -TD
21447 # * add sgr strings to several common entries lacking them, e.g.,
21448 # screen, to make the entries more portable -TD
21449 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
21450 # * similar fixups for cvvis/cnorm various entries -TD
21453 # * remove 'ncv' from xterm-256color (patch 188) -TD
21457 # * add xterm-xf86-v44 -TD
21458 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
21459 # on G1 being used via an ISO-2022 escape sequence (report by
21460 # Juliusz Chroboczek) -TD
21461 # * add 'hurd' entry -TD
21464 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
21466 # * align with xterm #192's use of xterm-new -TD
21467 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
21468 # * make xterm-new the default "xterm" -TD
21471 # * minor fixes for emu -TD
21473 # * add rmam/smam to linux (Trevor Van Bremen)
21474 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
21475 # * fixes for avatar0 -TD
21476 # * fixes for vp3a+ -TD
21479 # * add xterm-pc-fkeys -TD
21480 # * review/update gnome and gnome-rh90 entries (prompted by
21481 # Redhat Bugzilla #122815) -TD
21482 # * review/update konsole entries -TD
21483 # * add sgr, correct sgr0 for kterm and mlterm -TD
21484 # * correct tsl string in kterm -TD
21487 # * make ncsa-m rmacs/smacs consistent with sgr -TD
21488 # * add sgr, rc/sc and ech to syscons entries -TD
21489 # * add function-keys to decansi -TD
21490 # * add sgr to mterm-ansi -TD
21491 # * add sgr, civis, cnorm to emu -TD
21492 # * correct/simplify cup in addrinfo -TD
21493 # * corrections for gnome and konsole entries
21494 # (Redhat Bugzilla #122815) -Hans de Goede
21495 # * modify DEC entries (vt220, etc), to add sgr string, and to use
21496 # ISO-2022 strings for rmacs/smacs -TD
21499 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
21502 # * improved putty entry -Robert de Bath
21505 # * remove dch/dch1 from rxvt because they are implemented inconsistently
21506 # with the common usage of bce/ech -TD
21507 # * remove khome from vt220 (vt220's have no home key) -TD
21508 # * add rxvt+pcfkeys -TD
21511 # * modify several entries to ensure xterm mouse and cursor visibility
21512 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
21513 # Eterm, screen. (The xterm entries are left alone - old ones for
21514 # compatibility, and the new ones do not require this change) -TD
21517 # * add morphos entry -Pavel Fedin
21518 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
21519 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
21522 # * update wsvt25 entry -TD
21525 # * update pairs for xterm-88color and xterm-256color to reflect the
21526 # ncurses extended-color support -TD
21529 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
21530 # * add aixterm-16color to demonstrate 16-color capability -TD
21533 # * add media-copy to vt100 -TD
21534 # * corrected acsc string for vt52 -TD
21537 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
21539 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
21542 # * re-corrected acsc string for vt52 -TD
21545 # * corrected sun-il sgr string which referred to bold and underline -TD
21546 # * add sun-color entry -TD
21549 # * modify sgr0 in several entries to reset alternate-charset as in the
21551 # * modify sgr string of prism9 to better match the individual
21555 # * correct order of use= in rxvt-basic -TD
21558 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
21561 # * other minor fixes to cygwin based on tack -TD
21562 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
21565 # * add nsterm-16color entry -TD
21566 # * remove ncv flag from xterm-16color -TD
21567 # * remove setf/setb from xterm-256color to match xterm #209 -TD
21568 # * update mlterm entry to 2.9.2 -TD
21571 # * fixes to make nsterm-16color match report
21572 # by Christian Ebert -Alain Bench
21575 # * add xterm+256color building block -TD
21576 # * add gnome-256color, putty-256color, rxvt-256color -TD
21579 # * add hpterm-color -TD
21582 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
21583 # * add gnome-fc5 (prompted by GenToo #122566) -TD
21584 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
21585 # * improve xterm-256color by combining the ibm+16color setaf/setab
21586 # strings with SGR 48. The setf/setb strings also are cancelled here
21587 # rather than omitted so derived entries will cancel those also -Alain
21591 # * add some notes regarding copyright to terminfo.src -TD
21592 # * use rxvt+pcfkeys in Eterm -TD
21593 # * remove km and flash from gnome, Eterm and rxvt since they do not work
21594 # as one would expect (km sends ESC rather than setting the 8th bit
21596 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
21597 # * add konsole-solaris -TD
21600 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
21601 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
21602 # * modify xterm-24 to inherit from "xterm" -TD
21603 # * add xiterm entry -TD
21604 # * add putty-vt100 entry -TD
21605 # * corrected spelling of Michael A Dorman's name, prompted by
21606 # http://www.advogato.org/person/mdorman/diary.html -TD
21609 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
21610 # * update xterm+pcfkeys to match xterm #216 -TD
21613 # * make descriptions of xterm entries consistent with its terminfo -TD
21616 # * add xfce, mgt -TD
21619 # * correct acsc string in kterm -TD
21622 # * add kon entry -TD
21623 # * remove invis from linux and related entries, add klone+sgr8 for those
21624 # that implement the feature (or have not been shown to lack it) -TD
21627 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
21628 # * minor improvements to rxvt+pcfkeys -TD
21631 # * fix a few typos in if/then/else expressions -TD
21634 # * add several GNU Screen variations with 16- and 256-colors, and
21635 # status line (Alain Bench).
21638 # * add Newbury Data entries (Jean-Charles Billaud).
21641 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
21644 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
21645 # * add konsole-256color entry -TD
21648 # * add 9term entry (request by Juhapekka Tolvanen) -TD
21651 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
21652 # * add shift-control- and control-modified keys for rxvt editing
21654 # * update mlterm entry to 2.9.3 -TD
21655 # * add mlterm+pcfkeys -TD
21658 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
21659 # xterm+pcc0, etc., to make the corresponding building blocks reflect
21660 # xterm's capabilities -TD
21661 # * add mrxvt entry -TD
21662 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
21665 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
21668 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
21669 # xterm starting with patch #216 -TD
21670 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
21671 # to match xterm #230 -TD
21672 # * extend xterm+pccX entries to match xterm #230 -TD
21673 # * add xterm+app, xterm+noapp, from xterm #230 -TD
21674 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
21677 # * add screen.rxvt -TD
21680 # * add screen+fkeys (prompted by Debian # 478094) -TD
21682 # The following sets edit modes for GNU EMACS.
21687 # comment-start-skip:"^#+"
21688 # comment-start:"# "
21689 # compile-command:"tic -c terminfo.master"
21691 ######## SHANTIH! SHANTIH! SHANTIH!