1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2008/04/19 22:51:50 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+pp|ansi printer port,
380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The IBM PC alternate character set. Plug this into any Intel console entry.
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386 # ROM graphics for control characters such as the diamond, up- and down-arrow.
387 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
388 # will work with any Intel console, they all seem to have inherited \E[11m
389 # from the ANSI.SYS de-facto standard.
390 klone+acs|alternate character set for ansi.sys displays,
391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392 rmacs=\E[10m, smacs=\E[11m,
394 # Highlight controls corresponding to the ANSI.SYS standard. Most
395 # console drivers for Intel boxes obey these. Makes the same assumption
396 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
397 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398 klone+sgr|attribute control for ansi.sys displays,
399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400 rmso=\E[m, rmul=\E[m,
401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
405 # Most Intel boxes do not treat "invis" (invisible) text.
406 klone+sgr8|attribute control for ansi.sys displays,
408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
411 # Highlight controls corresponding to the ANSI.SYS standard. *All*
412 # console drivers for Intel boxes obey these. Does not assume \E[11m will
413 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414 # diamond and arrow characters under curses.
415 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
422 # KOI8-R (RFC1489) acs (alternate character set)
423 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426 rmacs=\E[10m, smacs=\E[11m,
428 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
429 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
430 # but equivalent strings that don't rely on that coincidence:
431 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434 # They match a subset of ECMA-48.
435 klone+color|color control for ansi.sys and ISO6429-compatible displays,
436 colors#8, ncv#3, pairs#64,
437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
439 # This is better than klone+color, it doesn't assume white-on-black as the
440 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
441 ecma+color|color control for ECMA-48-compatible terminals,
443 colors#8, ncv#3, pairs#64,
444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
446 # Attribute control for ECMA-48-compatible terminals
447 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
450 # For comparison, here are all the capabilities implied by the Intel
451 # Binary Compatibility Standard (level 2) that fit within terminfo.
452 # For more detail on this rather pathetic standard, see the comments
453 # near the end of this file.
454 ibcs2|Intel Binary Compatibility Standard prescriptions,
455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
456 cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
457 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
458 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
459 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
460 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
462 #### ANSI/ECMA-48 terminals and terminal emulators
464 # See near the end of this file for details on ANSI conformance.
465 # Don't mess with these entries! Lots of other entries depend on them!
467 # This section lists entries in a least-capable to most-capable order.
468 # if you're in doubt about what `ANSI' matches yours, try them in that
469 # order and back off from the first that breaks.
471 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
472 # and more than one page of memory. It uses local motions instead of
473 # direct cursor addressing, and makes almost no assumptions. It does
474 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
475 ansi-mr|mem rel cup ansi,
477 cols#80, lines#24, use=vanilla, use=ansi+erase,
480 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
481 # beware of screen size problems and memory relative cursor addressing.
482 ansi-mini|any ansi terminal with pessimistic assumptions,
484 cols#80, lines#24, use=vanilla, use=ansi+cup,
487 # ansi-mtabs adds relative addressing and minimal tab support
488 ansi-mtabs|any ansi terminal with pessimistic assumptions,
490 ht=^I, use=ansi+local1, use=ansi-mini,
492 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
494 # The following is an entry for the full ANSI 3.64 (1977). It lacks
495 # padding, but most terminals using the standard are "fast" enough
496 # not to require any -- even at 9600 bps. If you encounter problems,
497 # try including the padding specifications.
499 # Note: the :as: and :ae: specifications are not implemented here, for
500 # the available termcap documentation does not make clear WHICH alternate
501 # character set to specify. ANSI 3.64 seems to make allowances for several.
502 # Please make the appropriate adjustments to fit your needs -- that is
503 # if you will be using alternate character sets.
505 # There are very few terminals running the full ANSI 3.64 standard,
506 # so I could only test this entry on one verified terminal (Visual 102).
507 # I would appreciate the results on other terminals sent to me.
509 # Please report comments, changes, and problems to:
511 # U.S. MAIL: Hugh Hansard
514 # Atlanta, GA. 30322.
516 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
518 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
519 ansi77|ansi 3.64 standard 1977 version,
521 cols#80, it#8, lines#24,
522 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
523 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
524 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
525 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
527 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
528 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
529 smso=\E[7m, smul=\E[4m,
531 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
532 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
533 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
534 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
535 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
536 # to confuse many emulators. On the other hand, we can count on these programs
537 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
538 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
539 # ANSI.SYS influence.
540 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
541 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
543 cols#80, it#8, lines#24,
544 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
545 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
546 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
547 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
548 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
550 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
551 lines#25, use=pcansi-m,
552 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
553 lines#33, use=pcansi-m,
554 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
555 lines#43, use=pcansi-m,
556 # The color versions. All PC emulators do color...
557 pcansi|ibm-pc terminal programs claiming to be ansi,
558 use=klone+color, use=pcansi-m,
559 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
560 lines#25, use=pcansi,
561 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
562 lines#33, use=pcansi,
563 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
564 lines#43, use=pcansi,
566 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
567 # If you want pound signs rather than dollars, replace `B' with `A'
568 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
569 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
570 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
572 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
573 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
574 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
575 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
576 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
577 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
578 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
579 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
580 vpa=\E[%i%p1%dd, use=pcansi-m,
582 ansi+enq|ncurses extension for ANSI ENQ,
583 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
586 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
587 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
588 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
589 ansi|ansi/pc-term compatible with color,
590 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
592 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
593 # all the normal ANSI stuff with no extensions. It assumes
594 # insert/delete line/char is there, so it won't work with
595 # vt100 clones. It assumes video attributes for bold, blink,
596 # underline, and reverse, which won't matter much if the terminal
597 # can't do some of those. Padding is assumed to be zero, which
598 # shouldn't hurt since xon/xoff is assumed.
599 ansi-generic|generic ansi standard terminal,
601 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
602 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
603 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
604 use=ansi+sgrbold, use=ansi+arrows,
606 #### DOS ANSI.SYS variants
608 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
609 # documentation (except for the keyboard key reassignment feature, which
610 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
611 # though undocumented. The <pfkey> capability is untested but should work for
612 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
613 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
614 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
615 OTbs, am, mir, msgr, xon,
617 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
618 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
619 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
620 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
621 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
622 u7=\E[6n, use=klone+color, use=klone+sgr8,
623 ansi.sys|ANSI.SYS 3.1 and later versions,
624 el=\E[K, use=ansi.sys-old,
627 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
628 # This should only be used when the terminal emulator cannot redefine the keys.
629 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
630 # definitions must be restored. If the terminal emulator is quit while in vi
631 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
632 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
633 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
634 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
635 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
636 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
637 # Consequently the End keypad key could not be set (it is relatively safe and
638 # actually useful because it sends ^@ O, which beeps and opens a line above).
639 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
640 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
641 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
642 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
645 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
646 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
647 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
648 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
651 # See ansi.sysk and nansi.sys above.
652 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
653 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
654 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
657 #### ANSI console types
662 # BeOS entry for Terminal program Seems to be almost ANSI
663 beterm|BeOS Terminal,
664 am, eo, mir, msgr, xenl, xon,
665 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
666 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
667 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
668 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
669 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
670 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
671 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
672 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
673 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
674 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
675 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
676 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
677 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
678 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
679 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
680 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
681 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
682 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
683 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
684 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
690 # This entry is good for the 1.2.13 or later version of the Linux console.
692 # ***************************************************************************
695 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
696 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
697 # * character. Here are the keymap replacement lines that will set this up: *
699 # keycode 15 = Tab Tab
700 # alt keycode 15 = Meta_Tab
701 # shift keycode 15 = F26
702 # string F26 ="\033[Z"
704 # * This has to use a key slot which is unfortunate (any unused one will *
705 # * do, F26 is the higher-numbered one). The change ought to be built *
706 # * into the kernel tables. *
708 # ***************************************************************************
710 # All linux kernels since 1.2.13 (at least) set the screen size
711 # themselves; this entry assumes that capability.
713 linux-basic|linux console,
714 am, bce, eo, mir, msgr, xenl, xon,
716 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
717 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
718 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
719 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
720 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
721 el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
722 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
723 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
724 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
725 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
726 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
727 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
728 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
729 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
730 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
731 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
732 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
733 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
734 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
735 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
738 linux-m|Linux console no color,
740 setab@, setaf@, setb@, setf@, use=linux,
742 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
743 # and it matters, turn off <ccc>. The %02x escape used to implement this is
744 # not supposedly back-portable to older SV curses (although it has worked fine
745 # on Solaris for several years) and not supported in ncurses versions before
747 linux-c-nc|linux console with color-change,
749 initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
750 oc=\E]R, use=linux-basic,
751 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
752 linux-c|linux console 1.3.6+ for older ncurses,
754 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
755 oc=\E]R, use=linux-basic,
757 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
758 # get a block cursor for cvvis.
759 # reported by Frank Heckenbach <frank@g-n-u.de>.
761 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
762 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
764 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
765 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
766 ich@, ich1@, use=linux,
768 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
769 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
770 linux-koi8|linux with koi8 alternate character set,
771 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
772 use=linux, use=klone+koi8acs,
774 # Another entry for KOI8-r with Qing Long's acsc.
775 # (which one better complies with the standard?)
776 linux-koi8r|linux with koi8-r alternate character set,
777 use=linux, use=klone+koi8acs,
779 # Entry for the latin1 and latin2 fonts
780 linux-lat|linux with latin1 or latin2 alternate character set,
781 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
784 # This uses graphics from VT codeset instead of from cp437.
785 # reason: cp437 (aka "straight to font") is not functional under luit.
786 # from: Andrey V Lukyanov <land@long.yar.ru>.
787 linux-vt|linux console using VT codes for graphics,
788 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
789 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
792 # This is based on the Linux console (relies on the console to perform some
793 # of the functionality), but does not recognize as many control sequences.
794 # The program comes bundled with an old (circa 1998) copy of the Linux
795 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
796 # \E* move cursor to home, as as \E[H
798 # \EE move cursor to beginning of row
799 # \E[y,xf same as \E[y,xH
801 # Note: The status-line support is buggy (dsl does not work).
802 kon|kon2|jfbterm|Kanji ON Linux console,
804 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
805 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
811 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
814 cols#80, it#8, lines#25,
815 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
816 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
817 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
818 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
819 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
820 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
821 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
822 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
823 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
824 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
825 smso=\E[7m, smul=\E[4m,
826 mach-bold|Mach Console with bold instead of underline,
827 rmul=\E[0m, smul=\E[1m, use=mach,
828 mach-color|Mach Console with ANSI color,
830 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
833 # From: Marcus Brinkmann
834 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
836 # Comments in the original are summarized here:
838 # hurd uses 8-bit characters (km).
840 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
842 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
843 # have the eat_newline_glitch. It doesn't support setting or removing tab
846 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
847 # one byte instead three.
849 # <ich1> is not included because hurd has insert mode.
851 # hurd doesn't use ^J for scrolling, because this could put things into the
854 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
855 # This is a GNU extension.
857 # The original has commented-out ncv, but is restored here.
859 # Reading the source, RIS resets cnorm, but not xmous.
860 hurd|The GNU Hurd console server,
861 am, bce, bw, eo, km, mir, msgr, xon,
862 colors#8, it#8, ncv#18, pairs#64,
863 acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
864 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
865 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
866 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
867 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
868 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
869 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
870 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
871 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
872 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
873 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
874 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
875 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
876 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
877 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
878 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
879 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
880 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
881 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
882 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
883 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
884 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
885 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
886 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
887 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
893 # OSF/1 1.1 Snapshot 2
894 pmcons|pmconsole|PMAX console,
897 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
898 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
899 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
901 # SCO console and SOS-Syscons console for 386bsd
902 # (scoansi: had unknown capabilities
903 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
904 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
905 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
906 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
907 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
908 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
909 # on the <smacs>=\E[12m -- esr)
911 # klone+sgr-dumb is an error since the acsc does not match -TD
913 # In this description based on SCO's keyboard(HW) manpage list of default
914 # function key values:
915 # F13-F24 are shifted F1-F12
916 # F25-F36 are control F1-F12
917 # F37-F48 are shift+control F1-F12
919 # hpa/vpa work in the console, but not in scoterm:
923 # SCO's terminfo uses
926 # which do not work (console or scoterm).
928 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
929 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
930 OTbs, am, bce, eo, xon,
931 colors#8, cols#80, it#8, lines#25, pairs#64,
932 acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
933 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
934 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
935 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
936 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
937 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
938 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
939 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
940 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
941 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
942 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
943 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
944 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
945 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
946 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
947 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
948 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
949 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
950 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
951 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
952 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
953 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
954 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
955 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
956 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
957 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
958 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
960 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
961 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
962 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
963 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
964 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
965 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
966 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
967 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
968 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
970 # make this easy to change...
971 scoansi|SCO Extended ANSI standard crt,
974 # This actually describes the generic SVr4 display driver for Intel boxes.
975 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
976 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
977 att6386|at386|386at|AT&T WGS 6386 console,
979 cols#80, it#8, lines#25,
980 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
981 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
982 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
983 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
984 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
985 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
986 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
987 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
988 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
989 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
990 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
991 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
992 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
993 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
994 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
995 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
997 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
998 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
999 tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
1000 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1001 pc6300plus|AT&T 6300 plus,
1004 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1005 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1006 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1007 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1008 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1009 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1010 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1011 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1012 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1013 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1015 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1017 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1018 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1019 # is broken. All the special key sequences are broken, making it unusable
1020 # with Emacs. The problem stems from the following:
1022 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1023 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1024 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1025 # uses resizable terminal windows, but the bundled terminal program always
1026 # uses an 80x24 window (and doesn't support seem to support a 132-column
1029 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1030 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1031 # access method".) tam includes support for real, overlapping windows,
1032 # onscreen function key labels, and bitmap graphics. But since the primary
1033 # user interface on the UNIX PC was a GUI program (ua, for "user
1034 # assistant",) and remote administration was considered important for the
1035 # machine, tam also supported VT100-compatible terminals attached to the
1036 # serial port or used across the StarLan network. To simulate the extra keys
1037 # not present on a VT100, users could press ESC and a two-letter sequence,
1038 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1039 # however, were not the same as those sent by the actual Undo key. The
1040 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1041 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1042 # have the full documentation and several programs which use tam. It also
1043 # used an extended terminfo format to describe key sequences, special
1044 # highlighting modes, etc.)
1046 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1047 # there are two sequences for every key-modifier combination (local keyboard
1048 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1049 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1050 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1051 # seem to have been built from the manual describing the VT100 sequences.
1052 # This means it doesn't work for a real live UNIX PC.
1054 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1055 # character set". Rather than the VT100 graphics you might expect, it allows
1056 # up to 8 custom fonts to be loaded at any given time. This means that
1057 # programs expecting VT100 graphics will usually be disappointed. For this
1058 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1059 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1060 # manpage), should you wish to do so:
1062 # SGR10 - Select font 0 - ESC [ 10 m or SO
1063 # SGR11 - Select font 1 - ESC [ 11 m or SI
1064 # SGR12 - Select font 2 - ESC [ 12 m
1066 # SGR17 - Select font 7 - ESC [ 17 m
1068 # Graphics for line drawing are not reliably found at *any* character
1069 # location because the UNIX PC has dynamically reloadable fonts. I use font
1070 # 0 for regular text and font 1 for italics, but this is by no means
1071 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1073 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1074 # distributed terminfo.
1076 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1077 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1078 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1079 # attached by serial cable. In Emacs, even the Undo key works, and many
1080 # applications can now use the F1-F8 keys.
1083 # Terminfo entry for the AT&T Unix PC 7300
1084 # from escape(7) in Unix PC 7300 Manual.
1085 # Somewhat similar to a vt100-am (but different enough
1086 # to redo this from scratch.)
1088 # /***************************************************************
1090 # * FONT LOADING PROGRAM FOR THE UNIX PC
1092 # * This routine loads a font defined in the file ALTFONT
1093 # * into font memory slot #1. Once the font has been loaded,
1094 # * it can be used as an alternative character set.
1096 # * The call to ioctl with the argument WIOCLFONT is the key
1097 # * to this routine. For more information, see window(7) in
1098 # * the PC 7300 documentation.
1099 # ***************************************************************/
1100 # #include <string.h> /* needed for strcpy call */
1101 # #include <sys/window.h> /* needed for ioctl call */
1102 # #define FNSIZE 60 /* font name size */
1103 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1105 # * The file /usr/lib/wfont/special.8.ft comes with the
1106 # * standard PC software. It defines a graphics character set
1107 # * similar to that of the Teletype 5425 terminal. To view
1108 # * this or other fonts in /usr/lib/wfont, use the command
1109 # * cfont <filename>. For further information on fonts see
1110 # * cfont(1) in the PC 7300 documentation.
1113 # struct altfdata /* structure for alt font data */
1115 # short altf_slot; /* memory slot number */
1116 # char altf_name[FNSIZE]; /* font name (file name) */
1120 # int wd; /* window in which altfont will be */
1121 # struct altfdata altf;
1123 # strcpy(altf.altf_name,ALTFONT);
1124 # for (wd =1; wd < 12; wd++) {
1125 # ioctl(wd, WIOCLFONT,&altf);
1129 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1130 # they're confirmed by the man page for the System V display---esr)
1132 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1134 cols#80, it#8, lines#24,
1135 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1136 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1137 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1138 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1139 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1140 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1141 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1142 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1143 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1144 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1145 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1146 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1147 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1148 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1149 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1150 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1151 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1152 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1153 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1154 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1155 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1156 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1159 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1160 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1161 # for the application keypad mode. We have added iris-ansi-ap rather than
1162 # change the original to keypad mode.
1164 # (iris-ansi: added rmam/smam based on init string -- esr)
1166 # This entry, and those derived from it, is used in xwsh (also known as
1167 # winterm). Some capabilities that do not fit into the terminfo model
1168 # include the shift- and control-functionkeys:
1170 # F1-F12 generate different codes when shift or control modifiers are used.
1174 # control-F1 \E[025q
1176 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1177 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1179 # The cursor keys also have different codes:
1180 # control-up \E[162q
1181 # control-down \E[165q
1182 # control-left \E[159q
1183 # control-right \E[168q
1186 # shift-down \E[164q
1187 # shift-left \E[158q
1188 # shift-right \E[167q
1190 # control-tab \[072q
1192 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1194 cols#80, it#8, lines#40,
1195 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1196 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1197 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1198 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1199 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1200 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1201 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1202 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1203 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1204 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1205 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1206 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1207 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1208 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1209 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1210 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1211 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1212 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1213 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1215 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1216 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1217 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1219 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1220 # (T.Dickey 98/1/24)
1221 iris-color|xwsh|IRIX ANSI with color,
1223 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1224 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1225 rmul=\E[24m, rs1=\Ec,
1226 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1227 sitm=\E[3m, use=vt100+enq, use=klone+color,
1230 # The following is a version of the ibm-pc entry distributed with PC/IX,
1231 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1232 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1233 # (the former is untrue, and the latter failed under UCB/man); standout and
1234 # underline modes have been added. Note: this entry describes the "native"
1235 # capabilities of the PC monochrome display, without ANY emulation; most
1236 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1240 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1241 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1242 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1245 # (ibmpcx: this entry used to be known as ibmx.
1246 # It formerly included the following extension capabilities:
1247 # :GC=b:GL=v:GR=t:RT=^J:\
1248 # :GH=\E[196g:GV=\E[179g:\
1249 # :GU=\E[193g:GD=\E[194g:\
1250 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1251 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1252 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1253 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1254 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1255 # what was there before. -- esr)
1256 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1259 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1260 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1261 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1262 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1263 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1264 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1270 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1271 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1272 # right corner without triggering a scroll. The ncurses terminfo library can
1273 # handle this case with the <ich1> capability, and prefers <am> for better
1274 # optimization. Bug: The <op> capability resets attributes.
1275 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1276 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1277 qnx|qnx4|qnx console,
1278 daisy, km, mir, msgr, xhpa, xt,
1279 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1280 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1281 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1282 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1283 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1284 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1285 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1286 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1287 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1288 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1289 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1290 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1291 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1292 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1293 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1294 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1295 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1296 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1297 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1298 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1299 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1300 kext=\377\270, kf1=\377\201, kf10=\377\212,
1301 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1302 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1303 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1304 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1305 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1306 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1307 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1308 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1309 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1310 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1311 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1312 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1313 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1314 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1315 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1316 khlp=\377\350, khome=\377\240, khts=\377\342,
1317 kich1=\377\253, kil1=\377\273, kind=\377\261,
1318 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1319 knp=\377\252, knxt=\377\312, kopn=\377\357,
1320 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1321 kprv=\377\302, krdo=\377\336, kref=\377\354,
1322 kres=\377\360, krfr=\377\347, kri=\377\271,
1323 krmir=\377\313, krpl=\377\362, krst=\377\352,
1324 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1325 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1326 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1327 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1328 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1332 qnxt|qnxt4|QNX4 terminal,
1335 qnxm|QNX4 with mouse events,
1337 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1338 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1339 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1340 smicm=\E/>2h, use=qnx4,
1345 # Monochrome QNX4 terminal or console. Setting this terminal type will
1346 # allow an application running on a color console to behave as if it
1347 # were a monochrome terminal. Output will be through stdout instead of
1348 # console writes because the term routines will recognize that the
1349 # terminal name starts with 'qnxt'.
1351 qnxtmono|Monochrome QNX4 terminal or console,
1355 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1356 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1357 # (TD: derive from original qnx4 entry)
1358 qnxt2|qnx 2.15 serial terminal,
1360 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1361 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1363 # QNX ANSI terminal definition
1366 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1367 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
1368 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1369 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1370 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1371 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1372 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1373 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1374 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1375 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1376 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1377 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1378 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1379 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1380 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1381 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1382 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1383 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1384 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1385 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1386 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1387 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1388 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1389 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1390 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1391 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1392 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1393 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1394 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1395 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1396 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1397 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1398 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1399 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1400 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1401 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1402 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1403 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1404 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1405 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1406 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1407 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1408 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1409 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1410 smul=\E[4m, tbc=\E[2g,
1411 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1413 qansi|QNX ansi with console writes,
1414 daisy, xhpa, use=qansi-g,
1416 qansi-t|QNX ansi without console writes,
1419 qansi-m|QNX ansi with mouse,
1421 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1422 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1423 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1424 smicm=\E[>2h, use=qansi,
1426 qansi-w|QNX ansi for windows,
1429 #### NetBSD consoles
1431 # pcvt termcap database entries (corresponding to release 3.31)
1432 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1434 # (For the terminfo master file, I translated these into terminfo syntax.
1435 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1436 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1437 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1439 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1440 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1441 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1442 pcvtXX|pcvt vt200 emulator (DEC VT220),
1443 am, km, mir, msgr, xenl,
1445 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1446 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1447 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1448 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1449 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1450 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1451 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1452 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1453 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1454 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1455 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1456 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1457 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1458 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1459 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1460 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1461 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1462 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1463 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1464 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1466 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1467 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1468 # 50 lines entries; 80 columns
1469 pcvt25|dec vt220 emulation with 25 lines,
1471 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1472 pcvt28|dec vt220 emulation with 28 lines,
1474 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1475 pcvt35|dec vt220 emulation with 35 lines,
1477 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1478 pcvt40|dec vt220 emulation with 40 lines,
1480 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1481 pcvt43|dec vt220 emulation with 43 lines,
1483 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1484 pcvt50|dec vt220 emulation with 50 lines,
1486 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1488 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1489 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1490 # 50 lines entries; 132 columns
1491 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1493 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1494 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1496 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1497 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1499 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1500 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1502 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1503 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1505 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1506 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1508 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1510 # OpenBSD implements a color variation
1511 pcvt25-color|dec vt220 emulation with 25 lines and color,
1513 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1514 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1515 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1516 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1517 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1520 # Terminfo entries to enable the use of the ncurses library in colour on a
1521 # NetBSD-arm32 console (only tested on a RiscPC).
1522 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1523 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1524 # typo in invis - TD
1525 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1526 am, bce, msgr, xenl, xon,
1527 cols#80, it#8, lines#30,
1528 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1529 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1530 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1531 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1532 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1533 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1534 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1535 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1536 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1537 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1538 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1539 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1540 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1541 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1542 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1544 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1545 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1546 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1549 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1550 cols#132, lines#50, use=arm100,
1552 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1553 # manufactured by Sharp for the Japenese market.
1554 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1555 x68k|x68k-ite|NetBSD/x68k ITE,
1557 kclr=\E[9~, khlp=\E[28~, use=vt220,
1560 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1562 # (still unfinished, but good enough so far.)
1563 ofcons|DNARD OpenFirmware console,
1566 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1567 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1568 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1569 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1570 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1571 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1572 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1573 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1574 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1575 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1576 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1577 rmso=\2330m, rmul=\2330m,
1578 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1581 # NetBSD "wscons" emulator in vt220 mode.
1582 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1583 # The emulator renders underlined text in red. Colors are otherwise usable.
1585 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1586 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1587 # vt220 screens in vttest do not work with this emulator. For instance, it
1588 # identifies itself (primary DA response) as a vt220 with selective erase. But
1589 # the selective erase feature does not work. The secondary response is copied
1590 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1591 # the level of detail in a termcap, it is a passable emulator, since ECH does
1592 # work. Don't use it on a VMS system -TD
1593 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1595 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1596 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1597 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1598 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1599 kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
1600 setaf=\E[3%p1%dm, use=vt220,
1602 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1605 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1607 rcons|BSD rasterconsole,
1609 # Color version of above. Color currently only provided by NetBSD.
1610 rcons-color|BSD rasterconsole with ANSI color,
1613 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1615 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1616 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1617 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1618 # -- compare with cons25w
1620 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1621 colors#8, cols#80, it#8, lines#18, pairs#64,
1622 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1623 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1624 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1625 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1626 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1627 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1628 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1629 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1630 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1631 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1632 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1633 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1634 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1635 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1636 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1637 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1639 #### FreeBSD console entries
1641 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1642 # Andrey Chernov maintains the FreeBSD termcap distributions.
1644 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1645 # or comment out the :cb: capability in the console entry.
1647 # Alexander Lukyanov reports:
1648 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1649 # Now el1 clears not only to the line beginning, but also a large chunk
1650 # of previous line. But there is another bug - ech does not work at all.
1654 # common entry without semigraphics
1655 # Bug: The <op> capability resets attributes.
1656 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1657 # instance el1 does if the cursor is moved to the right margin first. Removed
1658 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1660 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1661 # Note that this disables standout with color.
1663 # The emulator sends difference strings based on shift- and control-keys,
1665 # F13-F24 are shifted F1-F12
1666 # F25-F36 are control F1-F12
1667 # F37-F48 are shift+control F1-F12
1668 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1669 am, bce, bw, eo, msgr, npc,
1670 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1671 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1672 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1673 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1674 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1675 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1676 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1677 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1678 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1679 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1680 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1681 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1682 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1683 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1684 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1685 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1686 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1687 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1688 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1689 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1690 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1691 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1692 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1693 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1694 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1695 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1696 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1697 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1699 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1701 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1702 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1703 smul=\E[4m, use=cons25,
1704 cons30|ansi80x30|freebsd console (30-line ansi mode),
1705 lines#30, use=cons25,
1706 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1707 lines#30, use=cons25-m,
1708 cons43|ansi80x43|freebsd console (43-line ansi mode),
1709 lines#43, use=cons25,
1710 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1711 lines#43, use=cons25-m,
1712 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1713 lines#50, use=cons25,
1714 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1715 lines#50, use=cons25-m,
1716 cons60|ansi80x60|freebsd console (60-line ansi mode),
1717 lines#60, use=cons25,
1718 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1719 lines#60, use=cons25-m,
1720 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1721 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1723 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1725 op@, rmul=\E[m, setab@, setaf@,
1726 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1727 smul=\E[4m, use=cons25r,
1728 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1729 lines#50, use=cons25r,
1730 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1731 lines#50, use=cons25r-m,
1732 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1733 lines#60, use=cons25r,
1734 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1735 lines#60, use=cons25r-m,
1736 # ISO 8859-1 FreeBSD console
1737 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1738 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1740 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1742 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1743 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1744 smul=\E[4m, use=cons25l1,
1745 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1746 lines#50, use=cons25l1,
1747 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1748 lines#50, use=cons25l1-m,
1749 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1750 lines#60, use=cons25l1,
1751 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1752 lines#60, use=cons25l1-m,
1754 #### 386BSD and BSD/OS Consoles
1757 # This was the original 386BSD console entry (I think).
1758 # Some places it's named oldpc3|oldibmpc3.
1759 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1760 origpc3|origibmpc3|IBM PC 386BSD Console,
1761 OTbs, am, bw, eo, xon,
1763 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1764 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1765 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1766 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1767 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1768 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1769 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1771 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1772 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1775 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1776 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1777 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1778 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1780 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1781 # Note, the emulator supports many of the additional console features
1782 # listed in the iBCS2 (e.g. character-set selection) though not all
1783 # are described here. This entry really ought to be upgraded.
1784 # Also note, the console will also work with fewer lines after doing
1785 # "stty rows NN", e.g. to use 24 lines.
1786 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1787 # Bug: The <op> capability resets attributes.
1788 bsdos-pc|IBM PC BSD/OS Console,
1789 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1790 use=bsdos-pc-nobold,
1792 bsdos-pc-nobold|BSD/OS PC console w/o bold,
1793 use=klone+color, use=bsdos-pc-m,
1795 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
1796 OTbs, am, eo, km, xon,
1797 cols#80, it#8, lines#25,
1798 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1799 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1800 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1801 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1802 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1803 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1804 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1805 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1808 # Old names for BSD/OS PC console used in releases before 4.1.
1809 pc3|BSD/OS on the PC Console,
1810 use=bsdos-pc-nobold,
1811 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1814 # BSD/OS on the SPARC
1815 bsdos-sparc|Sun SPARC BSD/OS Console,
1818 # BSD/OS on the PowerPC
1819 bsdos-ppc|PowerPC BSD/OS Console,
1823 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1825 # Actually (TD pointed this out at the time the acsc string was added):
1826 # vt52 shouldn't define full acsc since most of the cells don't match.
1827 # see vt100 manual page A-31. This is the list that does match:
1836 # The line-drawing happens to work in several terminal emulators, but should
1837 # not be used as a guide to the capabilities of the vt52. Note in particular
1838 # that vt52 does not support line-drawing characters (the scan-X values refer
1839 # to a crude plotting feature) -TD
1842 cols#80, it#8, lines#24,
1843 acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
1844 cub1=\ED, cud1=\EB, cuf1=\EC,
1845 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1846 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1847 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1849 #### DEC VT100 and compatibles
1851 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1852 # and micro consoles can be found in the `obsolete' section. More details on
1853 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1854 # found near the end of this file.
1856 # Except where noted, these entries are DEC's official terminfos.
1857 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1858 # Engineering for more information. Updated terminfos and termcaps
1859 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1861 # In October 1995 DEC sold its terminals business, including the VT and Dorio
1862 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1863 # its name to Boundless Technologies; see http://www.boundless.com.
1866 # NOTE: Any VT100 emulation, whether in hardware or software, almost
1867 # certainly includes what DEC called the `Level 1 editing extension' codes;
1868 # only the very oldest VT100s lacked these and there probably aren't any of
1869 # those left alive. To capture these, use one of the VT102 entries.
1871 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1872 # since the cursor is left in a different position while in the
1873 # weird state (concept at beginning of next line, vt100 at end
1874 # of this line) so all versions of vi before 3.7 don't handle
1875 # <xenl> right on vt100. The correct way to handle <xenl> is when
1876 # you output the char in column 80, immediately output CR LF
1877 # and then assume you are in column 1 of the next line. If <xenl>
1878 # is on, am should be on too.
1880 # I assume you have smooth scroll off or are at a slow enough baud
1881 # rate that it doesn't matter (1200? or less). Also this assumes
1882 # that you set auto-nl to "on", if you set it off use vt100-nam
1885 # The padding requirements listed here are guesses. It is strongly
1886 # recommended that xon/xoff be enabled, as this is assumed here.
1888 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1889 # tab settings are in non-volatile memory and don't need to be
1890 # reset upon login. Also setting the number of columns glitches
1891 # the screen annoyingly. You can type "reset" to get them set.
1893 # The VT100 series terminals have cursor ("arrows") keys which can operate
1894 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1895 # is the reset state, and is assumed to be the normal state. Application
1896 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1897 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1898 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1899 # was provided primarily as an aid to the porting of VT52 applications. It is
1900 # assumed that the cursor keys are normally in Cursor Mode, and expected that
1901 # applications such as vi will always transmit the <smkx> string. Therefore,
1902 # the definitions for the cursor keys are made to match what the terminal
1903 # transmits after the <smkx> string is transmitted. If the <smkx> string
1904 # is a null string or is not defined, then cursor keys are assumed to be in
1905 # "Cursor Mode", and the cursor keys definitions should match that assumption,
1906 # else the application may fail. It is also expected that applications will
1907 # always transmit the <rmkx> string to the terminal before they exit.
1909 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1910 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1911 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1912 # Application Mode. Numeric Mode is the reset state, and is assumed to be
1913 # the normal state. Application Mode is the "set" state. In Numeric Mode,
1914 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1915 # Enter key transmits the same as the Return key (Note: the Return key
1916 # can be configured to send either LF (\015) or CR LF). In Application Mode,
1917 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1918 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1919 # is normally in Numeric Mode. If an application requires that the keypad be
1920 # in Application Mode then it is expected that the user, or the application,
1921 # will set the TERM environment variable to point to a terminfo entry which has
1922 # defined the <smkx> string to include the codes that switch the keypad into
1923 # Application Mode, and the terminfo entry will also define function key
1924 # fields to match the Application Mode control codes. If the <smkx> string
1925 # is a null string or is not defined, then the keypad is assumed to be in
1926 # Numeric Mode. If the <smkx> string switches the keypad into Application
1927 # Mode, it is expected that the <rmkx> string will contain the control codes
1928 # necessary to reset the keypad to "Normal" mode, and it is also expected that
1929 # applications which transmit the <smkx> string will also always transmit the
1930 # <rmkx> string to the terminal before they exit.
1932 # Here's a diagram of the VT100 keypad keys with their bindings.
1933 # The top line is the name of the key (some DEC keyboards have the keys
1934 # labelled somewhat differently, like GOLD instead of PF1, but this is
1935 # the most "official" name). The second line is the escape sequence it
1936 # generates in Application Keypad mode (where "$" means the ESC
1937 # character). The third line contains two items, first the mapping of
1938 # the key in terminfo, and then in termcap.
1939 # _______________________________________
1940 # | PF1 | PF2 | PF3 | PF4 |
1941 # | $OP | $OQ | $OR | $OS |
1942 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1944 # | $Ow | $Ox | $Oy | $Om |
1945 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
1947 # | $Ot | $Ou | $Ov | $Ol |
1948 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
1950 # | $Oq | $Or | $Os | enter |
1951 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
1954 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
1956 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
1957 # terminfo guidelines. That is a compromise used to assign the remaining
1958 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
1960 vt100+keypad|dec vt100 numeric keypad no fkeys,
1961 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
1962 vt100+pfkeys|dec vt100 numeric keypad,
1963 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1965 vt100+fnkeys|dec vt100 numeric keypad,
1966 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
1967 kf9=\EOw, use=vt100+pfkeys,
1969 # A better adaptation to modern keyboards such as the PC's, which have a dozen
1970 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
1971 # use the 5-key arrangement to model the arrow keys as suggested in the
1972 # terminfo guidelines:
1973 # _______________________________________
1974 # | PF1 | PF2 | PF3 | PF4 |
1975 # | $OP | $OQ | $OR | $OS |
1976 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1978 # | $Ow | $Ox | $Oy | $Om |
1979 # |_ka1__K1_|_________|_ka3__K3_|_________|
1981 # | $Ot | $Ou | $Ov | $Ol |
1982 # |_________|_kb2__K2_|_________|_________|
1984 # | $Oq | $Or | $Os | enter |
1985 # |_kc1__K4_|_________|_kc3__K5_| $OM |
1988 # |___________________|_________|_kent_@8_|
1990 vt220+keypad|dec vt220 numeric keypad,
1991 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
1992 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
1995 vt100+enq|ncurses extension for vt100-style ENQ,
1996 u8=\E[?1;2c, use=ansi+enq,
1997 vt102+enq|ncurses extension for vt102-style ENQ,
1998 u8=\E[?6c, use=ansi+enq,
2000 # And here, for those of you with orphaned VT100s lacking documentation, is
2001 # a description of the soft switches invoked when you do `Set Up'.
2003 # Scroll 0-Jump Shifted 3 0-#
2004 # | 1-Smooth | 1-British pound sign
2005 # | Autorepeat 0-Off | Wrap Around 0-Off
2007 # | | Screen 0-Dark Bkg | | New Line 0-Off
2008 # | | | 1-Light Bkg | | | 1-On
2009 # | | | Cursor 0-Underline | | | Interlace 0-Off
2010 # | | | | 1-Block | | | | 1-On
2012 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2014 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2015 # | | | 1-On | | | 1-50 Hz
2016 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2017 # | | 1-ANSI | | 1-8 Bits
2018 # | Keyclick 0-Off | Parity 0-Off
2020 # Margin Bell 0-Off Parity Sense 0-Odd
2023 # The following SET-UP modes are assumed for normal operation:
2024 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2025 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2026 # Other SET-UP modes may be set for operator convenience or communication
2027 # requirements; I recommend
2028 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2029 # Unless you have a graphics add-on such as Digital Engineering's VT640
2030 # (and even then, whenever it can be arranged!) you should set
2033 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2034 vt100|vt100-am|dec vt100 (w/advanced video),
2035 OTbs, am, mc5i, msgr, xenl, xon,
2036 cols#80, it#8, lines#24, vt#3,
2037 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2038 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2039 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2040 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2041 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2042 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2043 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2044 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2045 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2046 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2047 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2048 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2049 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2050 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2051 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2052 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2054 vt100nam|vt100-nam|vt100 no automargins,
2055 am@, xenl@, use=vt100-am,
2056 vt100-vb|dec vt100 (w/advanced video) & no beep,
2057 bel@, flash=\E[?5h\E[?5l, use=vt100,
2059 # Ordinary vt100 in 132 column ("wide") mode.
2060 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2062 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2063 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2064 cols#132, lines#14, vt@,
2065 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2067 # vt100 with no advanced video.
2068 vt100-nav|vt100 without advanced video option,
2070 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2072 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2073 cols#132, lines#14, use=vt100-nav,
2075 # vt100 with one of the 24 lines used as a status line.
2076 # We put the status line on the top.
2077 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2080 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2081 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2082 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2083 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2085 # Status line at bottom.
2086 # Clearing the screen will clobber status line.
2087 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2090 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2091 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2093 # Most of the `vt100' emulators out there actually emulate a vt102
2094 # This entry (or vt102-nsgr) is probably the right thing to use for
2097 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2099 vt102-w|dec vt102 in wide mode,
2101 rs3=\E[?3h, use=vt102,
2103 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2104 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2105 # string in the canonical vt100 entry above leaves the screen littered
2106 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2107 # after highlight turnoffs. This entry should fix that, and even leave
2108 # ACS support working, at the cost of making multiple-highlight changes
2109 # slightly more expensive.
2110 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2111 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2112 sgr@, sgr0=\E[m, use=vt102,
2114 # VT125 Graphics CRT. Clear screen also erases graphics
2115 # Some vt125's came configured with vt102 support.
2116 vt125|vt125 graphics terminal,
2118 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2120 # This isn't a DEC entry, it came from University of Wisconsin.
2121 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2124 cols#80, it#8, lines#24, vt#3,
2125 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2126 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2127 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2128 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2129 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2130 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2131 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2132 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2133 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2135 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2136 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2137 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2139 # vt132 - like vt100 but slower and has ins/del line and such.
2140 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2141 # manual and from the ANSI standard, this describes the actual
2142 # terminal. I've never actually used a vt132 myself, so this
2147 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2148 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2150 # This vt220 description maps F5--F9 to the second block of function keys
2151 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2152 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2153 # PF1--PF4 are used as F1--F4.
2155 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2156 OTbs, OTpt, am, mir, xenl, xon,
2157 cols#80, lines#24, vt#3,
2159 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2160 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2161 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2162 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2163 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2164 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2165 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2166 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2167 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2168 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2169 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2170 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2171 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2172 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2173 rmso=\E[27m, rmul=\E[24m,
2174 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2175 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2176 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2177 smso=\E[7m, smul=\E[4m,
2179 # A much better description of the VT200/220; used to be vt220-8
2180 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2181 # designation to accommodate bug in pcvt -TD
2182 vt220|vt200|dec vt220,
2183 OTbs, am, mc5i, mir, msgr, xenl, xon,
2184 cols#80, it#8, lines#24, vt#3,
2185 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2186 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2187 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2188 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2189 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2190 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2191 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2192 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2193 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2194 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2195 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2196 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2197 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2198 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2199 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2200 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2201 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2202 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2203 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2204 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2205 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2206 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2207 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2208 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2209 vt220-w|vt200-w|DEC vt220 in wide mode,
2211 rs3=\E[?3h, use=vt220,
2212 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2213 OTbs, am, mc5i, mir, msgr, xenl, xon,
2214 cols#80, it#8, lines#24, vt#3,
2215 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2216 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2217 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2218 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2219 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2220 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2221 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2222 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2223 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2224 il=\233%p1%dL, il1=\233L, ind=\ED,
2225 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2226 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2227 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2228 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2229 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2230 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2231 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2232 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2233 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2234 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2235 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2236 rs1=\233?3l, sc=\E7,
2237 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2238 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2239 smso=\2337m, smul=\2334m, tbc=\2333g,
2242 # This vt220 description regards F6--F10 as the second block of function keys
2243 # at the top of the keyboard. This mapping follows the description given
2244 # in the VT220 Programmer Reference Manual and agrees with the labeling
2245 # on some terminals that emulate the vt220. There is no support for an F5.
2246 # See vt220 for an alternate mapping.
2248 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2249 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2250 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2251 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2252 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2254 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2256 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2258 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2259 # (not an official DEC entry!)
2260 # The problem with real vt220 terminals is they don't send escapes when in
2261 # in vt220 mode. This can be gotten around two ways. 1> don't send
2262 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2263 # features of vt100 advanced video which it then has.
2265 # This entry takes the view of putting a vt220 into vt100 mode so
2266 # you can use the escape key in emacs and everything else which needs it.
2268 # You probably don't want to use this on a VMS machine since VMS will think
2269 # it has a vt220 and will get fouled up coming out of emacs
2271 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2272 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2273 vt200-js|vt220-js|dec vt200 series with jump scroll,
2276 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2277 cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2278 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2280 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2281 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2282 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2283 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2284 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2285 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2286 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2288 # This was DEC's vt320. Use the purpose-built one below instead
2289 #vt320|DEC VT320 in vt100 emulation mode,
2292 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2294 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2296 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2298 # These entries are not DEC's official ones, they were purpose-built for the
2299 # VT320. Here are the designer's notes:
2300 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2301 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2302 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2303 # Things that use <knxt> usually use tab anyways... and things that don't use
2304 # tab usually use <knxt> instead...
2305 # kprv is same as tab - Backtab is useless...
2306 # I left out <sgr> because of its RIDICULOUS complexity,
2307 # and the resulting fact that it causes the termcap translation of the entry
2308 # to SMASH the 1k-barrier...
2309 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2310 # (vt320: uncommented <fsl> --esr)
2311 vt320|vt300|dec vt320 7 bit terminal,
2312 am, eslok, hs, mir, msgr, xenl,
2313 cols#80, lines#24, wsl#80,
2314 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2315 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2316 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2317 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2318 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2319 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2320 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2321 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2322 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2324 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2325 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2326 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2327 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2328 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2329 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2330 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2331 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2332 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2333 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2334 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2336 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2338 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2339 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2340 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2341 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2342 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2344 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2345 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2347 # We have to init 132-col mode, not 80-col mode.
2348 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2350 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2351 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2353 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2355 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2356 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2359 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2360 # which are pretty much a superset of the VT320. They have the
2361 # host writable status line, yet another different DRCS matrix size,
2362 # and such, but they add the DEC Technical character set, Multiple text
2363 # pages, selectable length pages, and the like. The difference between
2364 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2365 # monitor, the former has 4 planes and a color monitor. These terminals
2366 # support VT131 and ANSI block mode, but as with much of these things,
2367 # termcap/terminfo doesn't deal with these features.
2369 # Note that this entry is are set up in what was the standard way for GNU
2370 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2371 # keys were switched into application mode at the same time the numeric pad
2372 # is switched into application mode. This changes the definitions of the
2373 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2374 # your termcap or terminfo entry,
2376 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2377 # (vt340: string capability "sb=\E[M" corrected to "sr";
2378 # also, added <rmam>/<smam> based on the init string -- esr)
2379 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2380 am, eslok, hs, mir, msgr, xenl, xon,
2381 cols#80, it#8, lines#24, vt#3,
2382 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2383 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2384 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2385 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2386 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2387 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2388 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2389 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2390 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2392 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2393 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2394 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2395 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2396 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2397 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2398 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2399 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2400 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2401 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2402 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2403 tsl=\E[2$~\E[1$}\E[1;%dH,
2405 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2406 # (originally written with vt420 as its primary name, and usable for it).
2408 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2409 # text pages and long text pages with selectable length of the vt340, along
2410 # with left and right margins, rectangular area text copy, fill, and erase
2411 # operations, selected region character attribute change operations,
2412 # page memory and rectangle checksums, insert/delete column, reception
2413 # macros, and other features too numerous to remember right now. TERMCAP
2414 # can only take advantage of a few of these added features.
2416 # Note that this entry is are set up in what was the standard way for GNU
2417 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2418 # keys were switched into application mode at the same time the numeric pad
2419 # is switched into application mode. This changes the definitions of the
2420 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2421 # your termcap entry,
2423 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2424 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2425 # also, added <rmam>/<smam> based on the init string -- esr)
2426 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2427 am, eslok, hs, mir, msgr, xenl, xon,
2428 cols#80, it#8, lines#24, vt#3,
2429 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2430 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2431 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2432 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2433 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2434 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2435 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2436 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2437 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2438 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2439 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2440 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2441 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2442 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2443 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2444 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2445 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2446 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2447 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2448 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2449 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2450 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2451 tsl=\E[2$~\E[1$}\E[1;%dH,
2453 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2454 # a missing <sc> -- esr)
2457 cols#80, lines#24, vt#3,
2458 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2459 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2460 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2461 cub1=^H, cud1=\E[B, cuf1=\E[C,
2462 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2463 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2464 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2465 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2466 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2467 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2468 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2469 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2470 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2471 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2472 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2473 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2474 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2475 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2476 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2477 smkx=\E=, smso=\E[7m, smul=\E[4m,
2479 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2480 # takes two parameters, the key and the string. Translating the key is
2481 # straightforward (keys 1-5 are not defined on real terminals, though some
2482 # emulators define these):
2484 # if (key < 16) then value = key;
2485 # else if (key < 21) then value = key + 1;
2486 # else if (key < 25) then value = key + 2;
2487 # else if (key < 27) then value = key + 3;
2488 # else if (key < 30) then value = key + 4;
2489 # else value = key + 5;
2491 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2492 # There's no provision in terminfo for emitting a string in this format, so the
2493 # application has to know it.
2495 vt420pc|DEC VT420 w/PC keyboard,
2496 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2497 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2498 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2499 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2500 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2501 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2502 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2503 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2504 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2505 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2506 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2507 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2508 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2509 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2510 pctrm=USR_TERM\:vt420pcdos\:,
2511 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2514 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2516 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2518 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2519 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2521 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2522 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2523 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2524 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2525 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2526 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2527 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2532 vt510pc|DEC VT510 w/PC keyboard,
2534 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2539 # The VT520 is a monochrome text terminal capable of managing up to
2540 # four independent sessions in the terminal. It has multiple ANSI
2541 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2542 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2543 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2545 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2546 # [Alt]/[Print Screen] depending upon which keyboard and which
2547 # terminal mode is being used. If Set-Up has been disabled or
2548 # assigned to an unknown key, Set-Up may be entered by pressing
2549 # [F3] as the first key after power up, regardless of keyboard type.
2550 # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2553 cols#80, lines#24, vt#3,
2554 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2555 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2556 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2557 cub1=^H, cud1=\E[B, cuf1=\E[C,
2558 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2559 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2560 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2561 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2562 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2563 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2564 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2565 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2567 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2568 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2569 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2570 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2571 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2572 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2573 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2574 smso=\E[7m, smul=\E[4m,
2576 # (vt525: I added <rmam>/<smam> based on the init string;
2577 # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2580 cols#80, lines#24, vt#3,
2581 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2582 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2583 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2584 cub1=^H, cud1=\E[B, cuf1=\E[C,
2585 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2586 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2587 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2588 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2589 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2590 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2591 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2592 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2594 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2595 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2596 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2597 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2598 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2599 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2600 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2601 smso=\E[7m, smul=\E[4m,
2603 #### VT100 emulations
2606 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2607 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2608 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2609 # that this works best with a stock vt100 entry.
2610 dec-vt100|EWAN telnet's vt100 emulation,
2613 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2614 dec-vt220|DOS tnvt200 terminal emulator,
2617 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2618 # anyone who needs PC VT340 emulation. (or anything below that level, for
2619 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2620 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2621 # I can send the address if requested.
2622 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2623 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2624 z340|zstem vt340 terminal emulator 132col 42line,
2626 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2627 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2629 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2631 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2632 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2635 # CRT is shareware. It implements some xterm features, including mouse.
2636 crt|crt-vt220|CRT 2.3 emulating VT220,
2639 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2641 # PuTTY 0.55 (released 3 August 2004)
2642 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2644 # Comparing with 0.51, vttest is much better (only a few problems with the
2645 # cursor position reports and wrapping).
2647 # PuTTY 0.51 (released 14 December 2000)
2649 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2650 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2651 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2652 # to xterm, which is incorrect, since several features are misimplemented:
2654 # Alt+key always sends ESC+key, so 'km' capability is removed.
2656 # Control responses, wrapping and tabs are buggy, failing a couple of
2657 # screens in vttest.
2659 # xterm mouse support is not implemented (unrelease version may).
2661 # Several features such as backspace/delete are optional; this entry documents
2662 # the default behavior -TD
2664 putty|PuTTY terminal emulator,
2665 am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
2666 colors#8, it#8, ncv#22, pairs#64,
2667 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2668 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2669 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2670 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2671 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2672 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2673 dch=\E[%p1%dP, dch1=\E[P,
2674 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2675 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2676 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2677 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2678 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2680 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2681 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2682 kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
2683 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
2684 kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2685 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2686 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2687 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2688 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2689 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2690 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2691 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2692 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2693 rmso=\E[27m, rmul=\E[24m,
2694 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2695 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2696 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2697 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2698 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2699 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2700 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2701 vt100-putty|Reset PuTTY to pure vt100,
2702 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2704 # palette is hardcoded...
2705 putty-256color|PuTTY 0.58 with xterm 256-colors,
2706 initc@, use=xterm+256color, use=putty,
2708 # One of the keyboard selections is "VT100+".
2709 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2710 putty-vt100|VT100+ keyboard layout,
2711 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2712 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2713 kf9=\EOX, use=putty,
2715 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2716 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2717 # (communication program) which supports:
2719 # - Serial port connections.
2720 # - TCP/IP (telnet) connections.
2721 # - VT100 emulation, and selected VT200/300 emulation.
2722 # - TEK4010 emulation.
2723 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2725 # - Scripts using the "Tera Term Language".
2726 # - Japanese and Russian character sets.
2728 # The program does not come with terminfo or termcap entries. However, the
2729 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2730 # vt52 or doublesize character support; blinking is done with color). Besides
2731 # the HPA, VPA extensions it also implements CPL and CNL.
2733 # All of the function keys can be remapped. This description shows the default
2734 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2735 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2736 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2744 # ANSI colors are implemented, but cannot be combined with video attributes
2745 # except for reverse.
2747 # No fonts are supplied with the program, so the acsc string is chosen to
2748 # correspond with the default Microsoft terminal font.
2750 # Tera Term recognizes some xterm sequences, including those for setting and
2751 # retrieving the window title, and for setting the window size (i.e., using
2752 # "resize -s"), though it does not pass SIGWINCH to the application if the
2753 # user resizes the window with the mouse.
2754 teraterm|Tera Term Pro,
2757 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2758 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2759 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2760 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2761 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2762 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2763 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2764 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2765 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2766 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2767 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2768 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2769 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2770 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
2771 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
2772 use=klone+color, use=vt100,
2774 # Tested with WinNT 4.0, the telnet application assumes the screensize is
2775 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2778 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
2779 # for casual (occasional) use. Also fails several of the vttest screens,
2780 # but that is not unusual for vt100 "emulators".
2781 # b) Does not implement vt100 keypad
2782 # c) Recognizes a subset of vt52 controls.
2783 ms-vt100|MS telnet imitating dec vt100,
2785 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2786 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
2787 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
2789 # Tested with Windows 2000, the telnet application runs in a console window,
2790 # also using 'Terminal' font.
2793 # a) This version has no function keys or numeric keypad. Unlike the older
2794 # version, the numeric keypad is entirely ignored.
2795 # b) The program sets $TERM to "ansi", which of course is inaccurate.
2796 ms-vt100-color|vtnt|windows 2000 ansi (sic),
2798 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
2801 # Based on comments from Federico Bianchi:
2803 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
2804 # scheme for PF keys.
2806 # and PuTTY wishlist:
2808 # The modifiers are represented as the codes listed above, prefixed to
2809 # the normal sequences. If the modifier is pressed alone, its sequence
2810 # is transmitted twice in succession. If multiple modifiers apply,
2811 # they're transmitted in the order shift, control, alt.
2816 ms-vt100+|vt100+|windows XP vt100+ (sic),
2817 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
2818 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
2819 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
2820 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
2821 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
2822 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
2823 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
2824 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
2825 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
2826 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
2827 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
2828 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
2829 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
2830 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
2831 knp=\E/, kpp=\E?, use=ms-vt100-color,
2833 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
2836 # a minimal subset of a vt100 (compare with "news-unk).
2837 tt|tkterm|Don Libes' tk text widget terminal emulator,
2838 clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
2839 cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2840 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
2843 #### X terminal emulators
2845 # You can add the following line to your .Xdefaults to change the terminal type
2846 # set by the xterms you start up to my-xterm:
2848 # *termName: my-xterm
2850 # System administrators can change the default entry for xterm instances
2851 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2852 # case, xterm will detect and reject an invalid terminal type, falling back
2853 # to the default of xterm.
2856 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2857 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2858 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2859 # as these seem not to work -- esr)
2860 x10term|vs100-x10|xterm terminal emulator (X10 window system),
2861 OTbs, am, km, mir, msgr, xenl, xon,
2862 cols#80, it#8, lines#65,
2863 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2864 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2865 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2866 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2867 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2868 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2869 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2870 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2871 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2872 smso=\E[7m, smul=\E[4m,
2873 # Compatible with the R5 xterm
2874 # (from the XFree86 3.2 distribution, <blink=@> removed)
2875 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2876 # corrected typos in rs2 string - TD
2878 xterm-r5|xterm R5 version,
2879 OTbs, am, km, msgr, xenl,
2880 cols#80, it#8, lines#24,
2881 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2882 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2883 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2884 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2885 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2886 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2887 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2888 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2889 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2890 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2891 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2892 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2893 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2894 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2896 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2898 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
2899 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2900 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
2901 # Compatible with the R6 xterm
2902 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
2903 # added khome/kend, hts based on the R6 xterm code - TD
2904 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
2905 # for compatibility with other emulators).
2906 xterm-r6|xterm-old|xterm X11R6 version,
2907 OTbs, am, km, mir, msgr, xenl,
2908 cols#80, it#8, lines#24,
2909 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2910 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2912 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2914 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2915 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
2917 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
2918 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2919 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2920 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2921 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2922 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2923 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2924 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2925 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
2926 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2927 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2928 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
2929 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
2930 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2932 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
2933 # The name has been changed and some aliases have been removed.
2934 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
2935 OTbs, am, bce, km, mir, msgr, xenl,
2936 cols#80, it#8, lines#24, ncv@,
2937 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2938 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2939 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2940 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2941 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2943 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2944 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2945 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
2946 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
2948 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
2949 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
2950 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
2951 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2952 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2953 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2954 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2955 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
2956 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
2957 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
2958 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
2959 rmso=\E[27m, rmul=\E[24m, rs1=^O,
2960 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
2961 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2962 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2963 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2964 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
2965 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
2966 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
2967 use=ecma+color, use=vt220+keypad,
2969 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
2970 # codes for F1-F4 except while in VT220 mode.
2971 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
2972 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
2974 # This version was released in XFree86 3.3.3 (November 1998).
2975 # Besides providing printer support, it exploits a new feature that allows
2976 # xterm to use terminfo-based descriptions with the titeInhibit resource.
2977 # -- the distribution contained incorrect khome/kend values -TD
2978 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
2980 blink=\E[5m, ich1@, invis=\E[8m,
2981 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
2982 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
2983 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
2984 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2985 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
2987 # This version was released in XFree86 4.0.
2988 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
2990 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
2991 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
2992 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
2993 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
2994 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
2995 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
2996 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
2997 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
2998 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
2999 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3000 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3001 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3002 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3003 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3004 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3005 smcup=\E[?1049h, use=xterm-xf86-v333,
3007 # This version was released in XFree86 4.3.
3008 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3009 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3010 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3012 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3015 # This version was released in XFree86 4.4.
3016 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3017 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3018 rin=\E[%p1%dT, use=xterm-xf86-v43,
3020 xterm-xfree86|xterm terminal emulator (XFree86),
3023 # This version reflects the current xterm features.
3024 xterm-new|modern xterm terminal emulator,
3026 indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
3027 kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
3028 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3029 kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
3030 knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
3033 # This fragment describes as much of XFree86 xterm's "pc-style" function
3034 # keys as will fit into terminfo's 60 function keys.
3037 # ---------------------------------
3044 # 8 Shift + Alt + Control
3045 # ---------------------------------
3046 # The meta key may also be used as a modifier in this scheme, adding another
3047 # bit to the parameter.
3048 xterm+pcfkeys|fragment for PC-style fkeys,
3049 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3052 xterm+noapp|fragment with cursor keys in normal mode,
3053 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3056 xterm+app|fragment with cursor keys in application mode,
3057 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3060 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3061 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3062 # the earlier scheme, as noted in the "use=" clauses in this file.
3064 # The original assignments from patch #94 for cursor-keys had some technical
3067 # A parameter for a function-key to represent a modifier is just more
3068 # bits. But for a cursor-key it may change the behavior of the
3069 # application. For instance, emacs decodes the first parameter of a
3070 # cursor-key as a repeat count.
3072 # A parameterized string should (really) not begin with SS3 (\EO).
3073 # Rather, CSI (\E[) should be used.
3075 # For these reasons, the original assignments were deprecated. For
3076 # compatibility reasons, they are still available as a setting of xterm's
3077 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3078 # that might apply to xterm+pcfkeys with different values of that resource.
3079 xterm+pcc3|fragment with modifyCursorKeys:3,
3080 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3081 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3082 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3083 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3084 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3085 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3086 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3087 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3090 xterm+pcc2|fragment with modifyCursorKeys:2,
3091 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3092 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3093 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3094 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3095 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3096 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3097 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3099 xterm+pcc1|fragment with modifyCursorKeys:1,
3100 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3101 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3102 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3103 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3104 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3105 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3107 xterm+pcc0|fragment with modifyCursorKeys:0,
3108 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3109 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3110 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3111 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3112 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3113 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3116 # Here are corresponding fragments from xterm patch #216:
3118 xterm+pcf0|fragment with modifyFunctionKeys:0,
3119 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3120 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3121 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3122 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3123 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3124 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3125 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3126 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3127 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3128 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3129 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3130 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3131 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3132 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3133 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3134 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3135 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3137 xterm+pcf2|fragment with modifyFunctionKeys:2,
3138 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3139 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3140 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3141 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3142 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3143 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3144 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3145 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3146 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3147 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3148 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3149 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3150 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3151 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3152 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3153 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3154 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3155 kf8=\E[19~, kf9=\E[20~,
3157 # Chunks from xterm #230:
3158 xterm+pce2|fragment with modifyCursorKeys:2,
3159 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3160 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3161 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3162 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3163 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3164 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3165 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3166 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3167 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3168 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3169 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3172 xterm+edit|fragment for 6-key editing-keypad,
3173 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3176 xterm+pc+edit|fragment for pc-style editing keypad,
3177 kend=\E[4~, khome=\E[1~,
3179 xterm+vt+edit|fragment for vt220-style editing keypad,
3180 kfnd=\E[1~, kslt=\E[4~,
3183 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3184 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3185 # is shown here (because that is used in mrxvt and mlterm):
3186 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3187 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3188 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3189 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3190 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3191 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3192 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3193 kf63=\E[13;4~, use=xterm+pcf2,
3195 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3196 xterm-basic|modern xterm terminal emulator - common,
3197 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3198 colors#8, cols#80, it#8, lines#24, pairs#64,
3199 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3200 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3201 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3202 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3203 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3204 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3205 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3206 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3207 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3208 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3209 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
3210 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3211 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3212 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3213 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3214 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3215 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3216 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3217 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3218 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3219 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3220 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3221 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3223 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3224 # In retrospect, something like xterm-r6 was intended here -TD
3225 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3226 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3228 # This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3229 xterm-16color|xterm with 16 colors like aixterm,
3230 use=ibm+16color, use=xterm-new,
3232 # This is a compile-time feature of XFree86 xterm beginning with
3233 # patch #111 (1999/7/10) -TD
3234 xterm+256color|xterm 256-color feature,
3236 colors#256, pairs#32767,
3237 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3238 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3239 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3242 # This is a compile-time feature of XFree86 xterm beginning with
3243 # patch #115 (1999/9/18) -TD
3245 # Note that the escape sequences used are the same as for 256-colors - xterm
3246 # has a different table of default color resource values. If built for
3247 # 256-colors, it can still handle an 88-color palette by using the initc
3250 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3251 # which support the xterm+256color feature support the associated initc
3252 # capability. So it is cancelled in the entries which use this and/or the
3253 # xterm+256color block.
3254 xterm+88color|xterm 88-color feature,
3255 colors#88, pairs#7744, use=xterm+256color,
3257 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3258 xterm-256color|xterm with 256 colors,
3259 use=xterm+256color, use=xterm-new,
3260 xterm-88color|xterm with 88 colors,
3261 use=xterm+88color, use=xterm-256color,
3263 # These two are used to demonstrate the any-event mouse support, i.e., by
3264 # using an extended name "XM" which tells ncurses to put the terminal into
3265 # a special mode when initializing the xterm mouse.
3266 xterm-1002|testing xterm-mouse,
3267 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3268 xterm-1003|testing xterm-mouse,
3269 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3271 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3272 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3273 # To use it, your decTerminalID resource must be set to 200 or above.
3280 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3281 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3282 colors#8, cols#80, it#8, lines#24, pairs#64,
3283 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3284 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3285 civis=\233?25l, clear=\233H\2332J,
3286 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3287 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3288 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3289 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3290 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3291 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3292 flash=\233?5h$<100/>\233?5l, home=\233H,
3293 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3294 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3295 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3296 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
3297 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3298 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3299 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3300 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3301 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3302 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3303 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3304 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3305 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3306 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3307 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3308 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3310 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3311 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3312 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3313 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3314 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3315 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3316 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3317 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3318 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3320 xterm-hp|xterm with hpterm function keys,
3321 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3322 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3323 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3324 knp=\ES, kpp=\ET, use=xterm-basic,
3326 xterm-sco|xterm with SCO function keys,
3327 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3328 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3329 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3330 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3331 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3332 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3333 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3334 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3335 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3336 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3337 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3338 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3341 # The xterm-new description has all of the features, but is not completely
3342 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3343 # sunKeyboard resource to true:
3344 # + maps the editing keypad
3345 # + interprets control-function-key as a second array of keys, so a
3346 # 12-fkey keyboard can support vt220's 20-fkeys.
3347 # + maps numeric keypad "+" to ",".
3348 # + uses DEC-style control sequences for the application keypad.
3350 xterm-vt220|xterm emulating vt220,
3351 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3352 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3353 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3354 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3355 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3356 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3357 use=xterm+app, use=xterm+edit, use=xterm-basic,
3360 xterm-vt52|xterm emulating dec vt52,
3361 cols#80, it#8, lines#24,
3362 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3363 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3364 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3365 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
3366 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3368 xterm-noapp|xterm with cursor keys in normal mode,
3369 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3372 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3373 lines#24, use=xterm-old,
3375 # This is xterm for ncurses.
3376 xterm|xterm terminal emulator (X Window System),
3379 # These entries allow access to the X titlebar and icon name as a status line.
3380 # Note that twm (and possibly window managers descended from it such as tvtwm,
3381 # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3383 xterm+sl|access X title line and icon name,
3386 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3387 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3390 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3393 # The following xterm variants don't depend on your base version
3395 # xterm with bold instead of underline
3396 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3397 smso=\E[7m, smul=\E[1m, use=xterm-old,
3398 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3399 # (kterm should not invoke DEC Graphics as the alternate character set
3400 # -- Kenji Rikitake)
3401 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3402 # -- MATSUMOTO Shoji)
3403 # kterm implements acsc via built-in table of X Drawable's
3404 kterm|kterm kanji terminal emulator (X window system),
3407 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3408 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3409 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3410 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3411 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3412 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3413 kterm-color|kterm-co|kterm with ANSI colors,
3414 ncv@, use=kterm, use=ecma+color,
3415 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3416 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3417 ich@, ich1@, use=xterm,
3418 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3419 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3420 rmcup@, smcup@, use=xterm,
3422 # This describes the capabilities of color_xterm, an xterm variant from
3423 # before ECMA-64 color support was folded into the main-line xterm release.
3424 # This entry is straight from color_xterm's maintainer.
3425 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3426 # The README's with the distribution also say that it supports SGR 21, 24, 25
3427 # and 27, but they are not present in the terminfo or termcap.
3428 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3429 OTbs, am, km, mir, msgr, xenl,
3430 cols#80, it#8, lines#65, ncv@,
3431 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3432 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3433 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3434 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3435 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3436 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3437 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3438 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3439 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3440 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3441 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3442 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3443 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3444 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3445 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3446 rmso=\E[27m, rmul=\E[24m,
3447 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3449 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3450 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3451 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3452 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3454 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3455 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3456 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3457 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3458 # that each of those implements the home, end, delete keys differently.
3460 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3461 # colors; note that this is not compatible with the 5.2 version.
3462 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3463 # match XFree86's xterm.terminfo usage and prevent circular links
3464 xterm-color|nxterm|generic color xterm,
3466 op=\E[m, use=xterm-r6, use=klone+color,
3468 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3469 gnome-rh62|Gnome terminal,
3471 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3474 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3476 # This implements a subset of vt102 with a random selection of features from
3477 # other terminals such as color and function-keys.
3479 # shift-f1 to shift-f10 are f11 to f20
3481 # NumLock changes the application keypad to approximate vt100 keypad, except
3482 # that there is no escape sequence matching comma (,).
3484 # Other defects observed:
3485 # vt100 LNM mode is not implemented.
3486 # vt100 80/132 column mode is not implemented.
3487 # vt100 DECALN is not implemented.
3488 # vt100 DECSCNM mode is not implemented, so flash does not work.
3489 # vt100 TBC (tab reset) is not implemented.
3490 # xterm alternate screen controls do not restore cursor position properly
3491 # it hangs in tack after running function-keys test.
3492 gnome-rh72|GNOME Terminal,
3494 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3495 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3496 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3497 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3499 # GNOME Terminal 2.0.1 (Redhat 8.0)
3501 # Documentation now claims it implements vt220 (which is demonstrably false).
3502 # However, it does implement ECH, which is a vt220 feature. And there are
3503 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3504 # more of its bugs using vttest.
3506 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3507 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3509 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3510 # operations. Shift-tab generates a distinct sequence so it can be argued
3511 # that it implements kcbt.
3512 gnome-rh80|GNOME Terminal,
3514 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3515 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3517 # GNOME Terminal 2.2.1 (Redhat 9.0)
3519 # bce and msgr are repaired.
3520 gnome-rh90|GNOME Terminal,
3522 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3523 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3524 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3527 # GNOME Terminal 2.14.2 (Fedora Core 5)
3528 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3529 gnome-fc5|GNOME Terminal,
3531 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3532 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3534 # GNOME Terminal 2.18.1 (2007 snapshot)
3536 # For any "recent" version of gnome-terminal, it is futile to attempt to
3537 # support modifiers on cursor- and keypad keys because the program usually
3538 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3539 # of the keys (which more/less correspond to the termcap values), and will
3540 # interpret those according to the $TERM value, but others not in the
3541 # terminfo according to some constantly changing set of hacker guidelines -TD
3542 gnome-2007|GNOME Terminal snapshot 2.18.1,
3543 use=xterm+pcc2, use=gnome-fc5,
3545 gnome|GNOME Terminal,
3548 # palette is hardcoded...
3549 gnome-256color|GNOME Terminal with xterm 256-colors,
3550 initc@, use=xterm+256color, use=gnome,
3552 # XFCE Terminal 0.2.5.4beta2
3554 # This is based on some of the same source code, e.g., the VTE library, as
3555 # gnome-terminal, but has fewer features, fails more screens in vttest.
3556 # Since most of the terminfo-related behavior is due to the VTE library,
3557 # the terminfo is the same as gnome-terminal.
3561 # Multi-Gnome-Terminal 1.6.2
3563 # This does not use VTE, and does have different behavior (compare xfce and
3565 mgt|Multi GNOME Terminal,
3566 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3568 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
3569 # or not is debatable).
3572 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
3575 # (formerly known as kvt)
3577 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
3578 # simplify this entry (and point out why konsole isn't xterm), we base this on
3579 # xterm-r6. The default keyboard appears to be 'linux'.
3582 # a) konsole implements several features from XFree86 xterm, though none of
3583 # that is documented - except of course in its source code - apparently
3584 # because its implementors are unaccustomed to reading documentation - as
3585 # evidenced by the sparse and poorly edited documentation distributed with
3586 # konsole. Some features such as the 1049 private mode are recognized but
3587 # incorrectly implemented as a duplicate of the 47 private mode.
3588 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
3589 # sends PC-style escapes rather than vt100.
3590 # c) fails vttest menu 3 (Test of character sets) because it does not properly
3591 # parse some control sequences. Also fails vttest Primary Device Attributes
3592 # by sending a bogus code (in the source it says it's supposed to be a
3593 # vt220, which is doubly incorrect because it does not implement vt220
3594 # control sequences except for a few special cases). Treat it as a
3595 # mildly-broken vt102.
3597 # Update for konsole 1.3.2:
3598 # The 1049 private mode works (but see the other xterm screens in vttest).
3599 # Primary Device Attributes now returns the code for a vt100 with advanced
3600 # video option. Perhaps that's intended to be a "mildly-broken vt102".
3602 # Updated for konsole 1.6.4:
3603 # add konsole-solaris
3604 konsole-base|KDE console window,
3606 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
3607 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
3608 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
3609 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
3610 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
3611 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
3612 rmso=\E[27m, rmul=\E[24m,
3613 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3614 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3615 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
3616 use=ecma+color, use=xterm-r6,
3617 konsole-linux|KDE console window with linux keyboard,
3618 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
3619 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
3620 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3621 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3623 konsole-solaris|KDE console window with Solaris keyboard,
3624 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3625 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
3626 # than testing the code.
3627 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
3628 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3629 # The value for kbs reflects local customization rather than the settings used
3630 # for XFree86 xterm.
3631 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
3632 kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R,
3633 kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3634 kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3635 kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS,
3636 khome=\EOH, use=konsole-vt100,
3637 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
3638 # it is still useful for deriving the other entries.
3639 konsole-vt100|KDE console window with vt100 (sic) keyboard,
3640 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
3641 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
3642 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
3643 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3644 khome=\E[H, use=konsole-base,
3645 konsole-vt420pc|KDE console window with vt420 pc keyboard,
3646 kbs=^H, kdch1=\177, use=konsole-vt100,
3647 konsole-16color|klone of xterm-16color,
3648 ncv#32, use=ibm+16color, use=konsole,
3649 # make a default entry for konsole
3650 konsole|KDE console window,
3653 # palette is hardcoded...
3654 konsole-256color|KDE console window with xterm 256-colors,
3655 initc@, use=xterm+256color, use=konsole,
3657 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
3659 # It is nominally a vt102 emulator, with features borrowed from rxvt and
3662 # The function keys are numbered based on shift/control/alt modifiers, except
3663 # that the control-modifier itself is used to spawn a new copy of mlterm (the
3664 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
3665 # how it is configured.
3667 # kf1 to kf12 \E[11~ to \E[24~
3668 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
3669 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
3670 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
3671 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
3672 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
3673 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
3674 # control/shit/alt kf1 to kf12 \E[11;8~ to \E[24;8~
3676 mlterm|multi lingual terminal emulator,
3677 am, eslok, km, mc5i, mir, msgr, npc, xenl,
3678 colors#8, cols#80, it#8, lines#24, pairs#64,
3679 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3680 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3681 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3682 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3683 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3684 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3685 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3686 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
3687 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3688 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
3689 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3690 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3691 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
3692 kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
3693 mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3694 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
3695 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
3696 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
3697 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3698 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3699 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3700 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3701 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
3702 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
3704 # The insert/delete/home/end keys do not respond to modifiers because mlterm
3705 # looks in its termcap to decide which string to send. If it used terminfo
3706 # (when available), it could use the extended names introduced for xterm.
3707 mlterm+pcfkeys|fragment for PC-style fkeys,
3708 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
3709 kDN=\EO1;2B, kDN5=\EO1;5B, kDN6=\EO1;6B, kIC5=\E[2;5~,
3710 kIC6=\E[2;6~, kLFT5=\EO1;5D, kLFT6=\EO1;6D,
3711 kNXT5=\E[6;5~, kNXT6=\E[6;6~, kPRV5=\E[5;5~,
3712 kPRV6=\E[5;6~, kRIT5=\EO1;5C, kRIT6=\EO1;6C, kUP=\EO1;2A,
3713 kUP5=\EO1;5A, kUP6=\EO1;6A,
3715 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
3716 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
3719 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
3720 # but some applications don't work with that.
3721 # It also has an AIX extension
3725 # but the latter does not work correctly.
3727 # The distributed terminfo says it implements hpa and vpa, but they are not
3728 # implemented correctly, using relative rather than absolute positioning.
3730 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
3731 # Since rxvt is not really compatible with xterm, it should be configured as
3732 # "rxvt" or "rxvt-color".
3734 # removed dch/dch1 because they are inconsistent with bce/ech -TD
3735 # remove km as per tack test -TD
3736 rxvt-basic|rxvt terminal base (X Window System),
3737 OTbs, am, bce, eo, mir, msgr, xenl, xon,
3738 cols#80, it#8, lines#24,
3739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3740 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3741 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3742 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3743 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3744 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3745 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
3746 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
3747 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
3748 ind=^J, is1=\E[?47l\E=\E[?1l,
3749 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
3750 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3751 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
3753 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3754 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3755 s0ds=\E(B, s1ds=\E(0, sc=\E7,
3756 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3757 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3758 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3759 use=rxvt+pcfkeys, use=vt220+keypad,
3760 # Key Codes from rxvt reference:
3762 # Note: Shift + F1-F10 generates F11-F20
3764 # For the keypad, use Shift to temporarily override Application-Keypad
3765 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
3766 # is off, escape sequences toggle Application-Keypad setting.
3767 # Also note that values of Home, End, Delete may have been compiled
3768 # differently on your system.
3770 # Normal Shift Control Ctrl+Shift
3771 # Tab ^I ESC [ Z ^I ESC [ Z
3772 # BackSpace ^H ^? ^? ^?
3773 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
3774 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
3775 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3776 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
3777 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
3778 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
3779 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
3780 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
3781 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3782 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
3783 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
3784 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
3785 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
3786 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
3787 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
3788 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
3789 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
3790 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
3791 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
3792 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
3793 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
3794 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
3795 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
3796 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
3797 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
3798 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
3799 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
3800 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
3801 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
3804 # Up ESC [ A ESC [ a ESC O a ESC O A
3805 # Down ESC [ B ESC [ b ESC O b ESC O B
3806 # Right ESC [ C ESC [ c ESC O c ESC O C
3807 # Left ESC [ D ESC [ d ESC O d ESC O D
3808 # KP_Enter ^M ESC O M
3809 # KP_F1 ESC O P ESC O P
3810 # KP_F2 ESC O Q ESC O Q
3811 # KP_F3 ESC O R ESC O R
3812 # KP_F4 ESC O S ESC O S
3813 # XK_KP_Multiply * ESC O j
3814 # XK_KP_Add + ESC O k
3815 # XK_KP_Separator , ESC O l
3816 # XK_KP_Subtract - ESC O m
3817 # XK_KP_Decimal . ESC O n
3818 # XK_KP_Divide / ESC O o
3830 # The source-code for rxvt actually defines mappings for F21-F35, using
3831 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
3832 # are rare, so this entry uses the shift- and control-modifiers as in
3833 # xterm+pcfkeys to define keys past F12.
3835 # kIC is normally not used, since rxvt performs a paste for that (shifted
3836 # insert), unless private mode 35 is set.
3838 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
3839 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
3840 rxvt+pcfkeys|fragment for PC-style fkeys,
3841 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
3842 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
3843 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
3844 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3845 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3846 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3847 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
3848 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
3849 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
3850 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
3851 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
3852 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
3853 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
3854 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3855 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3856 kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
3857 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
3858 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
3859 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
3860 kUP=\E[a, kUP5=\EOa,
3862 rxvt|rxvt terminal emulator (X Window System),
3864 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
3865 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
3866 rxvt-color|rxvt terminal emulator (X Window System),
3868 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
3869 use=xterm+256color, use=rxvt,
3870 rxvt-xpm|rxvt terminal emulator (X Window System),
3872 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
3873 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3875 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
3876 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
3879 # This variant is supposed to work with rxvt 2.7.7 when compiled with
3880 # NO_BRIGHTCOLOR defined. rxvt needs more work...
3881 rxvt-16color|xterm with 16 colors like aixterm,
3882 ncv#32, use=ibm+16color, use=rxvt,
3886 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
3887 # makes its function-keys different from other flavors of rxvt -TD
3888 mrxvt|multitabbed rxvt,
3889 use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
3891 # From: Michael Jennings <mej@valinux.com>
3895 # removed kf0 which conflicts with kf10 -TD
3896 # remove cvvis which conflicts with cnorm -TD
3897 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
3898 # but does otherwise follow the rxvt+pcfkeys model -TD
3899 # remove nonworking flash -TD
3900 # remove km as per tack test -TD
3901 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
3902 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
3903 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
3904 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3905 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3906 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3908 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
3909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3910 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3911 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3912 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3913 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3914 is1=\E[?47l\E>\E[?1l,
3915 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
3916 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
3917 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
3918 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3919 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
3920 rmso=\E[27m, rmul=\E[24m,
3921 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3922 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3924 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3925 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3926 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3927 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
3931 # This is not based on xterm's source...
3932 # vttest shows several problems with keyboard, cursor-movements.
3933 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
3934 xiterm|internationalized terminal emulator for X,
3936 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
3938 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3939 # variant of xterm which is apparently no longer supported, but are interesting
3940 # because they illustrate SVr4 curses mouse controls - T.Dickey
3941 xtermm|xterm terminal emulator (monocrome),
3942 OTbs, am, km, mir, msgr, xenl,
3943 btns#3, cols#80, it#8, lines#24,
3944 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3945 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3946 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
3947 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3948 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3949 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3950 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3951 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3952 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3953 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3954 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3955 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3956 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3957 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3958 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3959 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3960 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3961 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3962 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3964 xtermc|xterm terminal emulator (color),
3965 colors#8, ncv#7, pairs#64,
3966 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3967 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3968 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3971 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3972 # Here's a termcap entry I've been using for xterm_color, which comes
3973 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3974 # color stuff, I also have a status line defined as the window manager
3975 # title bar. [I have translated it to terminfo -- ESR]
3976 xterm-pcolor|xterm with color used for highlights and status line,
3977 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
3978 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
3980 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
3981 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
3982 # chars look like --esr)
3983 hpterm|X-hpterm|hp X11 terminal emulator,
3984 am, da, db, mir, xhp,
3985 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
3986 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
3987 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
3988 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
3989 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
3990 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3991 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
3992 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
3993 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
3994 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
3995 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
3996 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
3997 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
3998 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
3999 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4001 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4002 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4003 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4004 # HPUX 11 provides a color version.
4005 hpterm-color|HP X11 terminal emulator with color,
4009 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4010 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4012 # This entry describes an xterm with Sun-style function keys enabled
4013 # via the X resource setting "xterm*sunFunctionKeys:true"
4014 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4015 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4016 # because we want it to be seen as <kcpy>.
4017 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4018 # with their Sun keyboard labels instead.
4019 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4020 xterm-sun|xterm with sunFunctionKeys true,
4021 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4022 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4023 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4024 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4025 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4026 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4027 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4028 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4029 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4030 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4031 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4032 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4034 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4035 cols#80, lines#24, use=xterm-sun,
4037 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4038 # It corresponds to emu's internal emulation:
4040 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4041 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4042 # fixes: add civis, cnorm, sgr -TD
4043 emu|emu native mode,
4044 am, bce, mir, msgr, xon,
4045 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4046 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4047 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4048 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4049 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
4050 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4051 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4052 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4053 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4054 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4055 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4056 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4057 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4058 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4059 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4060 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4061 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4062 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4064 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4065 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4067 # vt220 Terminfo entry for the Emu emulation, corresponds to
4069 # with NumLock set (to make the keypad transmit kf0-kf9).
4070 # fixes: add am, xenl, corrected sgr0 -TD
4071 emu-220|Emu-220 (vt200-7bit mode),
4073 cols#80, it#8, lines#24, vt#200,
4074 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4075 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4076 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4077 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4078 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4079 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4080 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4081 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4082 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4083 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4084 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4085 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4086 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4087 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4088 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4089 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4090 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4091 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4092 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4093 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4094 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4095 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4096 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4097 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4098 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4099 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4100 # indicate that it emulates more than one terminal, but incompletely.
4102 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4103 # It is based on vt102's entry, with some subtle differences, but also
4105 # supports ANSI colors (except for 'op' string)
4106 # apparently implements alternate screen like xterm
4107 # does not use padding, of course.
4108 mvterm|vv100|SwitchTerm aka mvTERM,
4109 am, eslok, hs, km, mir, msgr, xenl,
4110 colors#8, cols#80, it#8, lines#24, pairs#64,
4111 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4112 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4113 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4114 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4115 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4116 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4117 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4118 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4119 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4120 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4121 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4122 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4123 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4125 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4126 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4127 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4128 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4129 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4130 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4134 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4136 # "mterm -type ansi" sets $TERM to "ansi"
4137 mterm-ansi|ANSI emulation,
4140 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4141 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4142 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4143 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4144 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4145 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4146 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4147 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4148 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4149 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4151 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4152 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4154 # mterm normally sets $TERM to "mterm"
4155 mterm|mouse-sun|Der Mouse term,
4158 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4159 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4160 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4161 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4162 # "mterm -type decansi" sets $TERM to "decansi"
4164 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4165 decansi|ANSI emulation with DEC compatibility hacks,
4166 am, mir, msgr, xenl,
4167 colors#8, it#8, pairs#64,
4168 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4169 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4170 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4171 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4172 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4173 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4174 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4175 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4176 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4177 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4178 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4179 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4180 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4181 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4182 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4183 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4184 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4185 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4186 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4187 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4188 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4189 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4190 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4191 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4192 u7=\E[6n, vpa=\E[%i%p1%dd,
4196 # MGR is a Bell Labs window system lighter-weight than X.
4197 # These entries describe MGR's xterm-equivalent.
4198 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4201 mgr|Bellcore MGR (non X) window system terminal emulation,
4203 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4204 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4205 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4206 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4207 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4208 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4209 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4210 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4211 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4213 mgr-sun|Mgr window with Sun keyboard,
4214 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4215 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4216 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4217 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4218 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4219 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4220 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4221 mgr-linux|Mgr window with Linux keyboard,
4222 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4223 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4224 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4225 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4226 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4228 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4231 # Columbus UNIX virtual terminal. This terminal also appears in
4232 # UNIX 4.0 and successors as line discipline 1 (?), but is
4233 # undocumented and does not really work quite right.
4234 cbunix|cb unix virtual terminal,
4236 cols#80, lines#24, lm#0,
4237 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4238 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4239 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4240 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4241 smso=\Ea^D, smul=\Ea^A,
4242 # (vremote: removed obsolete ":nl@:" -- esr)
4243 vremote|virtual remote terminal,
4245 cols#79, use=cbunix,
4247 pty|4bsd pseudo teletype,
4248 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4249 smso=\Ea$, smul=\Ea!, use=cbunix,
4251 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4252 eterm|gnu emacs term.el terminal emulation,
4255 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4256 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4257 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4258 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4259 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4260 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4261 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4262 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4263 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4266 # Entries for use by the `screen' program by Juergen Weigert,
4267 # Michael Schroeder, Oliver Laumann. The screen and
4268 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4269 # come from University of Wisconsin and may be older.
4270 # (screen: added <cnorm> on ANSI model -- esr)
4272 # 'screen' defines extensions to termcap. Some are used in its terminal
4274 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4275 # AX (bool) Does understand ANSI set default fg/bg color
4276 # (\E[39m / \E[49m).
4277 # S0 (str) Switch charset 'G0' to the specified charset.
4278 # E0 (str) Switch charset 'G0' back to standard charset.
4280 # tested with screen 3.09.08
4281 screen|VT 100/ANSI X3.64 virtual terminal,
4282 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4283 colors#8, cols#80, it#8, lines#24, pairs#64,
4284 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4285 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4286 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4287 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4288 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4289 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4290 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4291 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4292 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4293 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4294 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4295 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4296 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4297 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4298 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4299 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4300 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4301 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4302 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4303 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4304 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4305 S0=\E(%p1%c, use=ecma+color,
4306 # The bce and status-line entries are from screen 3.9.13 (and require some
4307 # changes to .screenrc).
4308 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4310 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4311 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4313 # ======================================================================
4314 # Entries for GNU Screen with 16 colors.
4315 # Those variations permit to benefit from 16 colors palette, and from
4316 # bold font and blink attribute separated from bright colors. But they
4317 # are less portable than the generic "screen" 8 color entries: Their
4318 # usage makes real sense only if the terminals you attach and reattach
4319 # do all support 16 color palette.
4321 screen-16color|GNU Screen with 16 colors,
4322 use=ibm+16color, use=screen,
4324 screen-16color-s|GNU Screen with 16 colors and status line,
4325 use=ibm+16color, use=screen-s,
4327 screen-16color-bce|GNU Screen with 16 colors and BCE,
4328 use=ibm+16color, use=screen-bce,
4330 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
4331 bce, use=ibm+16color, use=screen-s,
4333 # ======================================================================
4334 # Entries for GNU Screen 4.02 with --enable-colors256.
4336 screen-256color|GNU Screen with 256 colors,
4338 initc@, use=xterm+256color, use=screen,
4340 screen-256color-s|GNU Screen with 256 colors and status line,
4342 initc@, use=xterm+256color, use=screen-s,
4344 screen-256color-bce|GNU Screen with 256 colors and BCE,
4346 initc@, use=xterm+256color, use=screen-bce,
4348 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
4350 initc@, use=xterm+256color, use=screen-s,
4352 # ======================================================================
4354 # Read the fine manpage:
4355 # When screen tries to figure out a terminal name for
4356 # itself, it first looks for an entry named "screen.<term>",
4357 # where <term> is the contents of your $TERM variable. If
4358 # no such entry exists, screen tries "screen" (or "screen-w"
4359 # if the terminal is wide (132 cols or more)). If even this
4360 # entry cannot be found, "vt100" is used as a substitute.
4362 # Here are a few customized entries which are useful -TD
4365 # (a) screen does not support invis.
4366 # (b) screen's implementation of bw is incorrect according to tack.
4367 # (c) screen appears to hardcode the strings for khome/kend, making it
4368 # necessary to override the "use=" clause's values.
4369 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4370 # which is NOT the same as the terminfo screen.<term>.
4371 # (e) when screen finds one of these customized entries, it sets $TERM to
4372 # match. Hence, no "screen.xterm" entry is provided, since that would
4373 # create heartburn for people running remote xterm's.
4375 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
4376 # since the default translations override the built-in keycode
4377 # translation. They are suppressed here to show what is tested by tack.
4378 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4380 invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@,
4382 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
4384 # xterm-r6 does not really support khome/kend unless it is propped up by
4385 # the translations resource.
4386 screen.xterm-r6|screen customized for X11R6 xterm,
4388 # Color applications running in screen and TeraTerm do not play well together
4389 # on Solaris because Sun's curses implementation gets confused.
4390 screen.teraterm|disable ncv in teraterm,
4392 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4395 screen.rxvt|screen in rxvt,
4397 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4398 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4399 use=vt100+enq, use=rxvt+pcfkeys, use=vt220+keypad,
4401 # fix the backspace key
4402 screen.linux|screen in linux console,
4404 kbs=\177, kcbt@, use=screen,
4406 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
4407 cols#132, use=screen,
4409 screen2|old VT 100/ANSI X3.64 virtual terminal,
4410 cols#80, it#8, lines#24,
4411 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
4412 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4413 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4414 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4415 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
4416 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4417 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
4418 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
4419 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
4420 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
4421 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
4422 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
4423 screen3|older VT 100/ANSI X3.64 virtual terminal,
4425 cols#80, it#8, lines#24,
4426 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
4427 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4428 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4429 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4430 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4431 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4432 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
4433 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
4434 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
4435 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
4436 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
4437 smul=\E[4m, tbc=\E[3g,
4439 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
4440 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
4441 # been maintained until recently by the National Center for Supercomputer
4442 # Applications, and it is feature rich, stable and free. It can be downloaded
4443 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
4444 # xterm+sl, and the docs at NCSA. It works well.
4446 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
4447 # The terminal options should be set as follows:
4448 # Xterm sequences ON
4449 # use VT wrap mode ON
4450 # use Emacs arrow keys OFF
4451 # CTRL-COMND is Emacs meta ON
4453 # answerback string: "ncsa-vt220-8"
4454 # setup keys: all disabled
4456 # Application mode is not used.
4458 # Other special mappings:
4465 # PAGEDOWN Next Screen
4467 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
4470 # The status-line manipulation is a mapping of the xterm-compatible control
4471 # sequences for setting the window-title. So you must use tsl and fsl in
4472 # pairs, since the latter ends the string that is loaded to the window-title.
4473 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4474 am, hs, km, mir, msgr, xenl,
4475 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4476 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4477 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4478 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4479 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4480 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4481 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4482 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4483 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
4484 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
4485 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
4486 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
4487 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4488 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
4489 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
4490 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
4491 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
4492 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
4493 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
4494 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
4495 rmso=\E[27m, rmul=\E[24m,
4496 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
4497 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4498 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
4499 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
4500 u8=\E[?62;1;6c, use=ansi+enq,
4501 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4502 use=ncsa-m, use=klone+color,
4503 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4505 dsl@, fsl@, tsl@, use=ncsa,
4506 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4508 dsl@, fsl@, tsl@, use=ncsa-m,
4510 # The documented function-key mapping refers to the Apple Extended Keyboard
4511 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
4512 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
4513 # some keyboards and many applications require these as F1-F4.
4515 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
4516 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4517 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4518 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
4519 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
4520 kf8=\E[19~, kf9=\E[20~, use=ncsa,
4522 #### Pilot Pro Palm-Top
4524 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
4525 # http://www.ai/~iang/TGssh/
4526 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
4529 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
4530 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
4531 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
4534 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
4535 # These entries are for the Embeddable Linux Kernel System (ELKS)
4536 # project - an heavily stripped down Linux to be run on 16 bit
4537 # boxes or, eventually, to be used in embedded systems - and have been
4538 # adapted from the stock ELKS termcap. The project itself looks stalled,
4539 # and the latest improvements I know of date back to March 2000.
4541 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
4542 # as an added bonus, this deals with all the capabilities common to
4543 # both VT52 and ANSI (or, eventually, "special") modes.
4545 elks-glasstty|ELKS glass-TTY capabilities,
4547 cols#80, it#8, lines#25,
4548 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
4551 elks-vt52|ELKS vt52 console,
4552 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
4553 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
4554 home=\EH, use=elks-glasstty,
4556 elks-ansi|ELKS ANSI console,
4557 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4558 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4559 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
4561 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
4562 # instead of VT52, but the "elks" entry still refers to the latter.
4564 elks|default ELKS console,
4567 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
4568 # one but in screen size
4570 sibo|ELKS SIBO console,
4571 cols#61, it#8, lines#20, use=elks-vt52,
4573 ######## COMMERCIAL WORKSTATION CONSOLES
4579 # This is from the OSF/1 Release 1.0 termcap file
4580 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
4583 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4584 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4585 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
4586 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
4587 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4592 # :is1: resets scrolling region in case a previous user had used "tset vt100"
4593 oldsun|Sun Microsystems Workstation console,
4594 OTbs, am, km, mir, msgr,
4595 cols#80, it#8, lines#34,
4596 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
4597 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4598 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4599 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4600 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4601 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
4602 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4603 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
4604 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
4605 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
4606 sun-il|Sun Microsystems console with working insert-line,
4609 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4610 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4611 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4612 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4613 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4614 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
4615 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
4616 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
4617 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
4618 knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
4619 kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
4620 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
4621 u8=\E[1t, u9=\E[11t,
4622 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
4623 # flake out on the last line. Unfortunately, without them the terminal has no
4625 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
4626 il@, il1@, use=sun-il,
4627 # If you are using an SS5, change the sun definition to use sun-ss5.
4628 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
4631 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
4632 sun-s|Sun Microsystems Workstation window with status line,
4634 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
4635 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
4637 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
4638 sun-48|Sun 48-line window,
4639 cols#80, lines#48, use=sun,
4640 sun-34|Sun 34-line window,
4641 cols#80, lines#34, use=sun,
4642 sun-24|Sun 24-line window,
4643 cols#80, lines#24, use=sun,
4644 sun-17|Sun 17-line window,
4645 cols#80, lines#17, use=sun,
4646 sun-12|Sun 12-line window,
4647 cols#80, lines#12, use=sun,
4648 sun-1|Sun 1-line window for sysline,
4651 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
4652 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
4653 ich1@, rmir@, smir@, use=sun,
4654 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
4656 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
4657 sun-type4|Sun Workstation console with type 4 keyboard,
4658 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
4659 kcuu1=\E[215z, use=sun-il,
4661 # Most of the current references to sun-color are from users wondering why this
4662 # is the default on install. Details from reading the wscons manpage, adding
4663 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
4664 # when those were added -TD
4665 sun-color|Sun Microsystems Workstation console with color support (IA systems),
4667 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
4668 cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
4670 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4671 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4677 # (wsiris: this had extension capabilities
4678 # :HS=\E7F2:HE=\E7F7:\
4679 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
4680 # See the note on Iris extensions near the end of this file.
4681 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
4682 # <flash> from BRL -- esr)
4683 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
4684 OTbs, OTnc, OTpt, am,
4685 OTkn#3, cols#80, it#8, lines#40,
4686 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
4687 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
4688 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
4689 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
4690 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
4691 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
4692 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
4693 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
4698 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
4699 # environment). Note: these have nothing to do with Sony's News workstation
4703 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
4704 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
4705 psterm|psterm-basic|NeWS psterm-80x34,
4706 OTbs, am, hs, km, ul,
4707 cols#80, it#8, lines#34,
4708 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
4709 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
4710 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
4711 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
4712 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
4713 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
4714 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
4716 psterm-96x48|NeWS psterm 96x48,
4717 cols#96, lines#48, use=psterm,
4718 psterm-90x28|NeWS psterm 90x28,
4719 cols#90, lines#28, use=psterm,
4720 psterm-80x24|NeWS psterm 80x24,
4721 cols#80, lines#24, use=psterm,
4722 # This is a faster termcap for psterm. Warning: if you use this termcap,
4723 # some control characters you type will do strange things to the screen.
4724 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
4725 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
4726 OTbs, am, hs, km, ul,
4727 cols#80, it#8, lines#34,
4728 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
4729 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
4730 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
4731 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4732 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
4733 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
4734 smso=^Oo, smul=^Ou, tsl=^Ol,
4738 # Use `glasstty' for the Workspace application
4741 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
4744 cols#80, it#8, lines#24,
4745 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4746 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4747 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
4748 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
4749 nextshell|NeXT Shell application,
4752 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
4755 #### Sony NEWS workstations
4758 # (news-unk: this had :KB=news: -- esr)
4759 news-unk|SONY NEWS vt100 emulator common entry,
4760 OTbs, OTpt, am, xenl,
4762 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
4763 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4764 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
4765 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
4766 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
4767 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
4768 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
4769 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
4770 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
4771 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4772 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
4773 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4775 # (news-29: this had :TY=ascii: --esr)
4777 lines#29, use=news-unk,
4778 # (news-29-euc: this had :TY=euc: --esr)
4781 # (news-29-sjis: this had :TY=sjis: --esr)
4785 # (news-33: this had :TY=ascii: --esr)
4787 lines#33, use=news-unk,
4788 # (news-33-euc: this had :TY=euc: --esr)
4791 # (news-33-sjis: this had :TY=sjis: --esr)
4795 # (news-42: this had :TY=ascii: --esr)
4797 lines#42, use=news-unk,
4798 # (news-42-euc: this had :TY=euc: --esr)
4801 # (news-42-sjis: this had :TY=sjis: --esr)
4805 # NEWS-OS old termcap entry
4807 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
4808 news-old-unk|SONY NEWS vt100 emulator common entry,
4809 OTbs, OTpt, am, xenl,
4811 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
4812 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4813 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
4814 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
4815 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4816 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
4817 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4818 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4819 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4821 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
4822 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
4825 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4828 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
4829 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
4831 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
4834 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
4835 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
4838 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4841 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
4842 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
4845 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4848 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
4849 # also the alias vt100-bm.
4850 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
4853 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
4856 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
4857 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
4860 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4863 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
4864 news28|sony vt100 emulator 28 lines,
4867 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
4870 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
4871 news29|news28-a|sony vt100 emulator 29 lines,
4873 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
4876 # (news511: this had :TY=sjis: --esr)
4877 nwp511|nwp-511|nwp-511 vt100,
4878 OTbs, OTpt, am, xenl,
4880 clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
4881 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
4882 ed=\E[J$<30/>, el=\E[K$<3/>,
4883 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
4884 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
4885 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
4886 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
4887 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
4888 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
4889 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
4890 # (news517: this had :TY=sjis:. --esr)
4891 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
4894 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
4895 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
4896 tsl=\E[1$}\E[;%df, use=vt200,
4897 # (news517-w: this had :TY=sjis:. --esr)
4898 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
4901 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
4902 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
4903 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
4904 tsl=\E[1$}\E[;%df, use=vt200,
4906 #### Common Desktop Environment
4909 # This ships with Sun's CDE in Solaris 2.5
4910 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
4911 dtterm|CDE desktop terminal,
4912 am, mir, msgr, xenl, xon,
4913 cols#80, it#8, lines#24, lm#0, ncv@,
4914 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4915 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4916 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4917 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4918 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4919 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4920 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4921 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4922 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
4923 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
4924 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
4925 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4926 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4927 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4928 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4929 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4930 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4931 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4932 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4933 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
4935 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4936 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
4937 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
4939 #### Non-Unix Consoles
4942 ### EMX termcap.dat compatibility modes
4944 # Keypad: Home=\0G Up=\0H PrPag=\0I
4945 # ka1,kh kcuu1 kpp,ka3
4947 # Left=\0K 5=\0L Right=\0M
4950 # End=\0O Down=\0P NxPag=\0Q
4951 # kc1,kend kcud1 kc3,knp
4956 # On keyboard with 12 function keys,
4957 # shifted f-keys: F13-F24
4958 # control f-keys: F25-F36
4959 # alt f-keys: F37-F48
4960 # The shift/control/alt keys do not modify each other, but alt overrides both,
4961 # and control overrides shift.
4963 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
4964 # no_color_video to inform the application that standout(1), underline(2)
4965 # reverse(4) and invisible(64) don't work with color.
4966 emx-base|DOS special keys,
4969 bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
4970 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
4971 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
4972 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
4973 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
4974 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
4975 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
4976 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
4977 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
4978 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
4979 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
4980 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
4983 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
4984 # a Unix-style environment used on OS/2. (Note that the suffix makes some
4985 # names longer than 14 characters, the nominal maximum).
4987 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
4988 ansi-emx|ANSI.SYS color,
4989 am, bce, eo, mir, msgr, xon,
4990 colors#8, cols#80, it#8, lines#25, pairs#64,
4991 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4992 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
4993 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
4994 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
4995 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
4996 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
4997 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
4998 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
4999 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5000 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5001 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5002 u9=\E[c, use=emx-base,
5003 # nice colors for Emacs (white on blue, mode line white on cyan)
5004 ansi-color-2-emx|ANSI.SYS color 2,
5005 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5006 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5007 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5008 smul=\E[1;36;44m, use=ansi-emx,
5009 # nice colors for Emacs (white on black, mode line black on cyan)
5010 ansi-color-3-emx|ANSI.SYS color 3,
5011 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5012 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5013 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5014 smul=\E[0;36;40m, use=ansi-emx,
5015 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5017 cols#80, it#8, lines#24,
5018 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5019 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5020 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5021 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5022 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5023 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5026 # Use this for cygwin32 (tested with beta 19.1)
5027 # underline is colored bright magenta
5028 # shifted kf1-kf12 are kf11-kf22
5029 cygwinB19|ansi emulation for cygwin32,
5030 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5031 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5032 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5033 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5034 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5035 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5036 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5039 # Use this for cygwin (tested with version 1.1.0).
5040 # I've combined pcansi and linux. Some values of course were different and
5041 # I've indicated which of these were and which I used.
5042 # Cheers, earnie_boyd@yahoo.com
5043 # several changes based on running with tack and comparing with older entry -TD
5044 # more changes from csw:
5046 # remove eo [erase overstrike with blank]
5047 # change clear was \E[H\E[J now \E[2J (faster?)
5050 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5052 # add cub [cursor back param]
5053 # add cuf [cursor forward param]
5054 # add cuu [cursor up param]
5055 # add cud [cursor down param]
5056 # add hs [has status line]
5057 # add fsl [return from status line]
5058 # add tsl [go to status line]
5059 # add smacs [Start alt charset] (not sure if this works)
5060 # add rmacs [End alt charset] (ditto)
5061 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5062 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5063 # add kb2 [center of keypad]
5064 # add u8 [user string 8] \E[?6c
5065 # add el [clear to end of line] \E[K
5067 # cnorm [make cursor normal] not implemented
5068 # flash [flash] not implemented
5069 # blink [blink] not implemented very usefully in cygwin? \E[5m
5070 # dim [dim] not implemented very usefully in cygwin? \E[2m
5071 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5072 # kNXT [shifted next key] not implemented
5073 # kPRV [shifted prev key] not implemented
5074 # khome [home key] really is \E[1~ NOT \E[H
5075 # tbc [clear tab stops] not implemented
5076 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5077 # smpch [Start PC charset] is \E[11m, same as smacs
5078 # rmpch [End PC charset] is \E[10m, same as rmacs
5079 # mir [move in insert mode] fails in tack?
5080 # bce [back color erase] causes problems with change background color?
5081 # cvvis [make cursor very visible] causes a stackdump when testing with
5082 # testcurs using the output option? \E[?25h\E[?8c
5083 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5084 # ech [erase characters param] broken \E[%p1%dX
5085 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5088 # Remove cbt since it does not work in current cygwin
5089 # Add 'mir' and 'in' flags based on tack
5090 cygwin|ansi emulation for Cygwin,
5091 am, hs, mir, msgr, xon,
5092 colors#8, it#8, pairs#64,
5093 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5094 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5095 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5096 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5097 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5098 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5099 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5100 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5101 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5102 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5103 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5104 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5105 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5106 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5107 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5108 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5109 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5110 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5111 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5112 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5113 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5114 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5115 vpa=\E[%i%p1%dd, use=vt102+enq,
5117 # I've supplied this so that you can help test new values and add other
5118 # features. Cheers, earnie_boyd@yahoo.com.
5120 # Some features are from pcansi. The op value is from linux. Function-keys
5121 # are from linux. These have been tested not to cause problems. xenl was in
5122 # this list, but DOES cause problems so it has been removed
5123 cygwinDBG|Debug Version for Cygwin,
5124 am, eo, mir, msgr, xon,
5125 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5126 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5127 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5128 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5129 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5130 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5131 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5132 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5133 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5134 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5135 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5136 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5137 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5138 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5139 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5140 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5141 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5142 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5143 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5144 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5145 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5146 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5147 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5148 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5149 smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
5152 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5153 # encodings used by other x86 environments. All others are invented for DJGPP.
5154 # Oddly enough, while several combinations of modifiers are tabulated, there is
5155 # none for shifted cursor keys.
5207 # Ctrl-Delete \E[43~
5208 # Ctrl-Down Arrow \E[38~
5211 # Ctrl-Insert \E[42~
5212 # Ctrl-Left Arrow \E[39~
5213 # Ctrl-Page Down \E[46~
5214 # Ctrl-Page Up \E[45~
5215 # Ctrl-Right Arrow \E[40~
5216 # Ctrl-Up Arrow \E[37~
5232 # Alt-Down Arrow \E[60~
5236 # Alt-Left Arrow \E[61~
5237 # Alt-Page Down \E[68~
5238 # Alt-Page Up \E[67~
5239 # Alt-Right Arrow \E[62~
5240 # Alt-Up Arrow \E[59~
5269 djgpp|ansi emulation for DJGPP alpha,
5270 am, bce, msgr, xhp, xon, xt,
5271 colors#8, it#8, pairs#64,
5272 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5273 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5274 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5275 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5276 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5277 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5278 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5279 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5280 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5281 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5282 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5283 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5284 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5285 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5286 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5287 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5288 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5289 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5290 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5292 djgpp203|Entry for DJGPP 2.03,
5294 cols#80, it#8, lines#25,
5295 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5298 djgpp204|Entry for DJGPP 2.04,
5300 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5301 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5302 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5303 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5304 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5305 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5306 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5307 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5308 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5309 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5310 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5311 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5312 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5313 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5314 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
5315 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
5317 # This is tested using U/Win's telnet. Scrolling is omitted because it is
5318 # buggy. Another odd bug appears when displaying "~" in alternate character
5319 # set (the emulator spits out error messages). Compare with att6386 -TD
5320 uwin|U/Win 3.2 console,
5321 am, eo, in, msgr, xenl, xon,
5322 colors#8, it#8, ncv#58, pairs#64,
5323 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5324 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5325 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
5326 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5327 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
5328 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
5329 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5330 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
5331 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
5332 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
5333 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
5334 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
5335 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5336 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
5337 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
5338 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
5340 # This entry fits the Windows NT console when the _POSIX_TERM environment
5341 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
5342 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
5343 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
5344 # systems is not, and (surprise!) they match very well.
5346 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
5347 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
5348 # are the installation instructions a pile of mind-numbing bureaucratese,
5349 # but the termcap entry is actually broken and unusable as given; the :do:
5350 # capability is misspelled "d".
5352 # To use this, you need to a bunch of environment variables:
5354 # SET _POSIX_TERM=on
5356 # SET TERMCAP=location of termcap file in POSIX file format
5357 # which is case-sensitive.
5358 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
5361 # Important note: setting the TMP environment variable in POSIX style renders
5362 # it incompatible with a lot of other applications, including Visual C++. So
5363 # you should have a separate command window just for vi. All the other
5364 # variables may be permanently set in the Control Panel\System applet.
5366 # You can find out more about the restrictions of this facility at
5367 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
5369 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
5370 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
5372 cols#80, it#8, lines#25,
5373 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5374 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5375 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
5376 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
5377 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
5378 # From: jew@venus.sunquest.com
5379 # Date: 19 Feb 93 23:41:07 GMT
5380 # Here's a combination of ansi and vt100 termcap
5381 # entries that works nearly perfectly for me
5382 # (Gateway 2000 Handbook and Microsoft Works 3.0):
5383 pcmw|PC running Microsoft Works,
5385 cols#80, it#8, lines#24, vt#3,
5386 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
5387 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
5388 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
5389 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
5390 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
5391 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5392 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
5393 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
5394 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5395 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5396 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5399 # From: Federico Bianchi
5400 # This is the entry for the OpenNT terminal.
5401 # The ntconsole name is for backward compatability.
5402 # This is for OpenNT 2.0 and later.
5403 # Later OpenNT was renamed to Interix.
5405 # Presently it is distributed by Microsoft as Services For Unix (SFU).
5406 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
5407 # the documentation dates from 1.9.9e) -TD
5409 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
5411 colors#8, cols#80, lines#25, ncv#3, pairs#64,
5412 acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
5413 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
5414 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
5415 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5416 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5417 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5418 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5419 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
5420 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
5421 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
5422 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
5423 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
5424 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
5425 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
5426 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
5427 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
5428 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
5429 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
5430 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
5431 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
5432 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
5433 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
5434 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
5435 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
5436 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5437 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
5438 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
5440 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
5441 lines#35, use=opennt,
5443 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
5444 lines#50, use=opennt,
5446 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
5447 lines#60, use=opennt,
5449 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
5450 lines#100, use=opennt,
5452 # OpenNT wide terminals
5453 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
5454 cols#125, use=opennt,
5456 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
5457 lines#35, use=opennt-w,
5459 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
5460 lines#50, use=opennt-w,
5462 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
5463 lines#60, use=opennt-w,
5465 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
5466 cols#132, use=opennt,
5468 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
5469 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
5470 rmcup@, smcup@, use=opennt,
5472 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
5473 lines#35, use=opennt-nti,
5475 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
5476 lines#50, use=opennt-nti,
5478 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
5479 lines#60, use=opennt-nti,
5481 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
5482 lines#100, use=opennt-nti,
5484 ######## COMMON TERMINAL TYPES
5486 # This section describes terminal classes and maker brands that are still
5487 # quite common, but have proprietary command sets not blessed by ANSI.
5492 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
5493 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
5494 # Acer has a web site at http://www.acer.com.
5496 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
5497 # His comments suggest they were shipped with the system.
5500 # (altos2: had extension capabilities
5501 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5502 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5503 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5504 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5505 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5506 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
5507 # :HL=^AP\r:SP=\E[i:\
5508 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5509 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
5510 # Comparison with the k* capabilities makes it obvious that the c* things are
5511 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
5512 # :sr: was given as a boolean-- esr)
5513 altos2|alt2|altos-2|altos II,
5514 cols#80, it#8, lines#24, xmc#0,
5515 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
5516 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
5517 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
5518 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
5519 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
5520 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
5521 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
5522 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5523 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5524 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5525 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5526 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
5527 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
5528 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
5529 # (altos3: had extension capabilities
5530 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5531 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5532 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5533 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5534 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5535 # :HL=^AP\r:SP=\E[i:\
5536 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5537 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
5538 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
5539 altos4|alt4|altos-4|altos IV,
5541 # (altos7: had extension capabilities:
5542 # :GG#0:GI=\EH8:GF=\EH7:\
5543 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5544 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5545 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5546 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5547 # Comparison with the k* capabilities makes it obvious that the c* things are
5548 # shift keys. I have renamed them to keys 32 and up accordingly. I have
5549 # also made this entry relative to adm12 in order to give it an <sgr>. The
5550 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
5551 altos7|alt7|altos VII,
5553 cols#80, lines#24, xmc#0,
5554 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
5555 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5556 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5557 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
5559 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
5560 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
5561 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
5562 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5563 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5564 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5565 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5566 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
5567 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
5568 rmir=\Er, smir=\Eq, use=adm+sgr,
5569 altos7pc|alt7pc|altos PC VII,
5570 kend=\ET, use=altos7,
5572 #### Hewlett-Packard (hp)
5575 # 8000 Foothills Blvd
5576 # Roseville, CA 95747
5577 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
5578 # 1-(800)-633-3600 (General customer support)
5581 # As of March 1998, HP no longer has any terminals in production.
5582 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
5583 # supported (they still have parts). So are the 2392a and 2394a.
5584 # See the WORKSTATION CONSOLES section for the 700s.
5587 # Generic HP terminal - this should (hopefully) work on any HP terminal.
5588 hpgeneric|hp|hewlett-packard generic terminal,
5589 OTbs, OTpt, am, da, db, mir, xhp,
5590 cols#80, lines#24, lm#0, vt#6,
5591 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5592 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
5593 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
5594 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
5595 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
5598 hp110|hewlett-packard model 110 portable,
5599 lines#16, use=hpgeneric,
5601 hp+pfk+cr|hp function keys with CR,
5602 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
5603 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
5605 hp+pfk-cr|hp function keys w/o CR,
5606 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
5609 # The hp2621s use the same keys for the arrows and function keys,
5610 # but not separate escape sequences. These definitions allow the
5611 # user to use those keys as arrow keys rather than as function
5613 hp+pfk+arrows|hp alternate arrow definitions,
5614 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
5615 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
5616 kll=\Eq\r, kri=\Es\r,
5618 hp+arrows|hp arrow definitions,
5619 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5620 kind=\ES, kll=\EF, kri=\ET,
5622 # Generic stuff from the HP 262x series
5624 hp262x|HP 262x terminals,
5626 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
5627 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5628 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5629 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
5630 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
5631 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
5632 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
5634 # Note: no <home> on HPs since that homes to top of memory, not screen.
5635 # Due to severe 2621 braindamage, the only way to get the arrow keys to
5636 # transmit anything at all is to turn on the function key labels
5637 # with <smkx>, and even then the user has to hold down shift!
5638 # The default 2621 turns off the labels except when it has to to
5639 # enable the function keys. If your installation prefers labels
5640 # on all the time, or off all the time (at the "expense" of the
5641 # function keys), use 2621-nl or 2621-wl.
5643 # Note: there are newer ROMs for 2621's that allow you to set
5644 # strap A so the regular arrow keys xmit \EA, etc, as with the
5645 # 2645. However, even with this strap set, the terminal stops
5646 # xmitting if you reset it, until you unset and reset the strap!
5647 # Since there is no way to set/unset the strap with an escape
5648 # sequence, we don't use it in the default.
5649 # If you like, you can use 2621-ba (brain-damaged arrow keys).
5650 hp2621-ba|2621 w/new rom and strap A set,
5651 rmkx@, smkx@, use=hp+arrows, use=hp2621,
5653 # hp2621 with function labels. Most of the time they are off,
5654 # but inside vi, the function key labels appear. You have to
5655 # hold down shift to get them to xmit.
5656 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
5657 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
5661 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
5662 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
5663 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
5664 use=hp+pfk+cr, use=hpgeneric,
5666 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
5667 hp2621p|hp 2621 with printer,
5668 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
5670 hp2621p-a|hp2621p with fn as arrows,
5671 use=hp+pfk+arrows, use=hp2621p,
5673 # hp2621 with k45 keyboard
5674 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
5675 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5676 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
5678 # 2621 using all 48 lines of memory, only 24 visible at any time.
5679 hp2621-48|48 line 2621,
5681 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
5684 # 2621 with no labels ever. Also prevents vi delays on escape.
5685 hp2621-nl|hp 2621 with no labels,
5686 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
5689 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
5692 hp2621-nt|hp 2621 w/no tabs,
5695 # Hp 2624 B with 4 or 10 pages of memory.
5697 # Some assumptions are made with this entry. These settings are
5698 # NOT set up by the initialization strings.
5700 # Port Configuration
5705 # Terminal Configuration
5711 # Note: the 2624 DOES have a true <home>, believe it or not!
5713 # The 2624 has an "error line" to which messages can be sent.
5714 # This is CLOSE to what is expected for a "status line". However,
5715 # after a message is sent to the "error line", the next carriage
5716 # return is EATEN and the "error line" is turned back off again!
5717 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
5719 # This entry supports emacs (and any other program that uses raw
5720 # mode) at 4800 baud and less. I couldn't get the padding right
5723 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
5724 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
5727 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
5728 use=hp+labels, use=scrhp,
5730 # This hp2626 entry does not use any of the fancy windowing stuff
5733 # Indeed, terminfo does not yet handle such stuff. Since changing
5734 # any window clears memory, it is probably not possible to use
5735 # this for screen opt.
5737 # ed is incredibly slow most of the time - I am guessing at the
5738 # exact padding. Since the terminal uses xoff/xon this is intended
5739 # only for cost computation, so that the terminal will prefer el
5740 # or even dl1 which is probably faster!
5742 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
5743 # extra slow on the last line of the window.
5745 # The padding probably should be changed.
5747 hp2626|hp2626a|hp2626p|hp 2626,
5750 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
5751 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
5752 use=hp+labels, use=scrhp,
5754 # This entry is for sysline. It allocates a 23 line window with
5755 # a 115 line workspace for regular use, and a 1 line window for
5758 # This assumes port 2 is being used.
5759 # Turn off horizontal line, Create ws #1 with 115 lines,
5760 # Create ws #2 with 1 line, Create window #1 lines 1-23,
5761 # Create window #2 lines 24-24, Attach cursor to workspace #1.
5762 # Note that this clears the tabs so it must be done by tset before
5765 hp2626-s|hp 2626 using only 23 lines,
5768 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
5769 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
5770 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
5771 # Force terminal back to 24 lines after being 23.
5772 hp2626-ns|hp 2626 using all 24 lines,
5773 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
5775 # Various entries useful for small windows on 2626.
5776 hp2626-12|hewlett-packard 2626 12 lines,
5777 lines#12, use=hp2626,
5778 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
5779 cols#40, lines#12, use=hp2626,
5780 hp2626-x40|hewlett-packard 2626 40 columns,
5781 cols#40, use=hp2626,
5782 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
5783 lines#11, use=hp2626-s,
5786 # hp2627 color tubes from University of Wisconsin
5788 hp2627a-rev|hp 2627 with reverse video colors,
5789 cr=^M, cud1=^J, ht=^I, ind=^J,
5790 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
5791 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
5792 smul=\E&dD\E&v1S, use=hp2621-nl,
5793 hp2627a|hp 2627 color terminal with no labels,
5794 cr=^M, cud1=^J, ht=^I, ind=^J,
5795 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
5796 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
5797 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
5799 hp2627c|hp 2627 color (cyan) terminal with no labels,
5800 cr=^M, cud1=^J, ht=^I, ind=^J,
5801 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
5802 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
5804 # hp2640a doesn't have the Y cursor addressing feature, and C is
5805 # memory relative instead of screen relative, as we need.
5808 cup@, rmkx@, smkx@, use=hp2645,
5810 hp2640b|hp2644a|hp 264x series,
5811 rmkx@, smkx@, use=hp2645,
5813 # (hp2641a: removed unknown :gu: -- esr)
5814 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
5815 am, da, db, mir, xhp,
5817 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5818 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
5819 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
5820 if=/usr/share/tabset/std, il1=\EL, ind=^J,
5821 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5822 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
5825 # This terminal should be used at 4800 baud or less. It needs padding for
5826 # plain characters at 9600, I guessed at an appropriate cr delay. It really
5827 # wants ^E/^F handshaking, but that doesn't work well even if you write
5828 # software to support it.
5829 hp2645|hp45|HP 2645 series,
5831 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
5832 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
5833 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
5834 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
5836 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
5837 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
5838 # You should use this terminal at 4800 baud or less.
5839 hp2648|hp2648a|HP 2648a graphics terminal,
5840 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
5841 dch1=\EP$<7>, ip=$<5>, use=hp2645,
5843 # The HP 150 terminal is a fairly vanilla HP terminal, with the
5844 # clreol standout problem. It also has graphics capabilities and
5845 # a touch screen, which we don't describe here.
5846 hp150|hewlett packard Model 150,
5849 # HP 2382a terminals, "the little ones." They don't have any
5850 # alternate character set support and sending out ^N/^O will
5851 # leave the screen blank.
5852 hp2382a|hp2382|hewlett packard 2382a,
5856 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
5858 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
5859 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
5861 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
5862 use=hp+pfk+arrows, use=hp2621-fl,
5864 # newer hewlett packard terminals
5866 newhpkeyboard|generic entry for HP extended keyboard,
5867 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5868 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5869 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
5870 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
5873 newhp|generic entry for new hewlett packard terminals,
5874 am, bw, mir, xhp, xon,
5875 cols#80, lines#24, pb#4800,
5876 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
5877 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
5878 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
5879 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
5880 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
5881 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
5882 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
5883 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
5884 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
5885 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
5886 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
5887 tbc=\E3, use=newhpkeyboard,
5889 memhp|memory relative addressing for new HP ttys,
5891 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
5892 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
5893 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
5894 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
5896 scrhp|screen relative addressing for new HP ttys,
5897 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
5898 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
5899 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
5900 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
5901 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
5903 # (hp+labels: added label values from a BRL termcap -- esr)
5904 hp+labels|"standard" label info for new HP ttys,
5906 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
5907 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
5908 rmln=\E&j@, smln=\E&jB,
5910 hp+printer|"standard" printer info for HP ttys,
5911 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
5914 # The new hp2621b is kind of a cross between the old 2621 and the
5915 # new 262x series of machines. It has dip-switched options.
5916 # The firmware has a bug in it such that if you give it a null
5917 # length label, the following character is eaten!
5918 hp2621b|hp 2621b with old style keyboard,
5919 lh#1, lm#48, lw#8, nlab#8,
5920 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5921 kind=\ET, kll=\EF, kri=\ES,
5922 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
5923 smln=\E&jB, use=hp2621,
5925 hp2621b-p|hp 2621b with printer,
5926 use=hp+printer, use=hp2621b,
5928 # hp2621b - new 2621b with new extended keyboard
5929 # these are closer to the new 26xx series than the other 2621b
5930 hp2621b-kx|hp 2621b with extended keyboard,
5931 use=newhpkeyboard, use=hp2621b,
5933 hp2621b-kx-p|hp 2621b with new keyboard & printer,
5934 use=hp+printer, use=hp2621b-kx,
5936 # Some assumptions are made in the following entries.
5937 # These settings are NOT set up by the initialization strings.
5939 # Port Configuration
5940 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
5942 # Terminal Configuration
5943 # InhHndShk(G)=Yes InhDC2(H)=Yes
5944 # XmitFnctn(A)=No InhEolWrp=No
5947 # Hp 2622a & hp2623a display and graphics terminals
5949 hp2622|hp2622a|hp 2622,
5952 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
5954 # The 2623 is a 2622 with extra graphics hardware.
5955 hp2623|hp2623a|hp 2623,
5958 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
5959 use=hp+printer, use=hp2624,
5961 # The hewlett packard B can have an optional extra 6 pages of memory.
5962 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
5965 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
5966 lm#240, use=hp2624b-p,
5968 # Color manipulations for HP terminals
5969 hp+color|hp with colors,
5971 colors#16, ncv#17, pairs#7,
5972 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
5973 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
5974 op=\E&v0S, scp=\E&v%p1%dS,
5976 # <is2> sets the screen to be 80 columns wide
5977 hp2397a|hp2397|hewlett packard 2397A color terminal,
5978 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
5980 # HP 700/44 Setup parameters:
5981 # Terminal Mode HP-PCterm
5982 # Inhibit Auto Wrap NO
5983 # Status Line Host Writable
5984 # PC Character Set YES
5985 # Twenty-Five Line Mode YES
5986 # XON/XOFF @128 or 64 (sc)
5987 # Keycode Mode NO or YES (sc)
5988 # Backspace Key BS or BS/DEL
5990 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
5991 # \E\\? does not turn off keycode mode
5992 # <smsc> sets alternate start/stop; keycode on
5993 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
5996 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
5997 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
5998 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5999 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6000 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6002 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6003 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6004 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6005 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6006 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6007 kpp=\E[5~, rmam=\E[?7l,
6008 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6009 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6010 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6011 smul=\E[4m, xoffc=g, xonc=e,
6013 # (hp2392: copied <rmir> here from hpex -- esr)
6016 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6017 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6018 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6019 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6022 hpsub|hp terminals -- capability subset,
6023 am, da, db, mir, xhp, xon,
6025 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6026 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6027 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6028 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6029 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6030 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6033 # May be used for most 24 x 80 hp terminals,
6034 # but has no padding added, so may allow runover in some terminals at high
6035 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6036 # hp98x5 terminal emulators or hp98x6 consoles.
6037 # Adds xy-cursor addressing, vertical cursor addressing, home,
6038 # last line, and underline capabilities.
6040 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6041 # moved <rmir> here from hpsub -- esr)
6042 hpex|hp extended capabilites,
6043 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6044 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6045 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6047 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6048 hp2|hpex2|hewlett-packard extended capabilities newer version,
6049 am, da, db, mir, xhp,
6050 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6051 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6052 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6053 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6054 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6055 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6056 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6057 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6058 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6059 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6060 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6061 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6062 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6063 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6064 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6065 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6066 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6067 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6070 # From: <ddavis@ic.berkeley.edu>
6071 hp236|hp236 internal terminal emulator,
6074 clear=\EF, cnorm=\EDE, cub1=^H,
6075 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6076 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6077 sgr0=\ECI, smso=\EBI,
6079 # This works on a hp300 console running Utah 4.3 BSD
6080 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6081 hp300h|HP Catseye console,
6082 OTbs, am, da, db, mir, xhp,
6083 cols#128, lines#51, lm#0, xmc#0,
6084 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6085 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6086 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6087 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6088 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6089 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6090 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6092 # From: Greg Couch <gregc@ernie.berkeley.edu>
6093 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6094 OTbs, am, da, db, mir, xhp,
6095 cols#128, it#8, lines#46, lm#0,
6096 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6097 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6098 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6099 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6100 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6101 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6102 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6103 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6104 tbc=\E3, vpa=\E&a%p1%dY,
6105 # HP 9845 desktop computer from BRL
6106 # (hp9845: removed unknown capability :gu: -- esr)
6108 OTbs, am, da, db, eo, mir, xhp,
6110 OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
6111 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
6112 if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
6113 smir=\EQ, smso=\E&dB,
6114 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6115 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6116 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6117 hp98550|hp98550a|HP 9000 Series 300 color console,
6118 OTbs, am, da, db, mir, xhp,
6119 cols#128, it#8, lines#49, lm#0,
6120 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6121 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6122 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6123 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6124 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6125 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6126 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6127 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6128 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6129 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6130 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6131 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6132 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6133 # From: Victor Duchovni <vic@fine.princeton.edu>
6134 # (hp700-wy: removed obsolete ":nl=^J:";
6135 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6136 hp700-wy|HP700/41 emulating wyse30,
6137 OTbs, am, bw, mir, msgr,
6138 cols#80, it#8, lines#24, xmc#1,
6139 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6140 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6141 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6142 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6143 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6144 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6145 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6146 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6147 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6148 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6149 hp70092|hp70092a|hp70092A|HP 700/92,
6151 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6152 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6153 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6154 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6155 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6156 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6157 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6158 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6159 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6160 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6161 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6162 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6163 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6164 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6166 bobcat|sbobcat|HP 9000 model 300 console,
6167 am, da, db, mir, xhp,
6168 cols#128, it#8, lines#47, xmc#0,
6169 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6170 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6171 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6172 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6173 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6174 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6175 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6176 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6177 lines#94, use=gator,
6178 gator|HP 9000 model 237 emulating AAA,
6180 cols#128, it#8, lines#47,
6181 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6182 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6183 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6184 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6185 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6186 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6187 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6188 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6189 gator-52|HP 9000 model 237 emulating VT52,
6190 cols#128, lines#47, use=vt52,
6191 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6192 lines#94, use=gator-52,
6196 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6199 # Honeywell Bull terminal. Its cursor and function keys send single
6200 # control characters and it has standout/underline glitch. Most programs
6201 # do not like these features/bugs. Visual bell is realized by flashing the
6202 # "keyboard locked" LED.
6203 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6205 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6206 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6207 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6208 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6209 dku7003|Honeywell Bull DKU 7003 all features described,
6212 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6213 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6216 #### Lear-Siegler (adm)
6218 # These guys are long since out of the terminals business, but
6219 # in 1995 many current terminals still have an adm type as one of their
6220 # emulations (usually their stupidest, and usually labeled adm3, though
6221 # these `adm3' emulations normally have adm3a+ capabilities).
6223 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6224 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6225 # was being held to ground would trigger a send of the top line on the screen.
6226 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6227 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6228 # for clearing up this point.)
6230 adm1a|adm1|lsi adm1a,
6233 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6234 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6239 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6240 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6241 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6242 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6243 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6247 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6248 # The following ADM-3A switch settings are assumed for normal operation:
6249 # SPACE U/L_DISP CLR_SCRN 24_LINE
6250 # CUR_CTL LC_EN AUTO_NL FDX
6251 # Other switches may be set for operator convenience or communication
6252 # requirements. I recommend
6253 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6255 # Most of these terminals required an option ROM to support lower case display.
6256 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6257 # socket, you may be out of luck.
6259 # (adm3a: some capabilities merged in from BRl entry -- esr)
6263 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6264 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6265 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6269 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6272 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6273 rmso=\EG, smso=\EG, use=adm3a+,
6274 # A lot of terminals other than adm11s use these. Wherever you see
6275 # use=adm+sgr with some of its capabilities disabled, try the
6276 # disabled ones. They may well work but not have been documented or
6277 # expressed in the using entry. We'd like to cook up an <sgr> but the
6278 # <rmacs>/<smacs> sequences of the using entries vary too much.
6279 adm+sgr|adm style highlight capabilities,
6280 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6281 smso=\EG4, smul=\EG8,
6282 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6283 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6284 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
6285 # be ^Z, according to his entry.
6286 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
6287 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
6290 OTkn#8, cols#80, lines#24,
6291 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6292 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6293 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6294 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6295 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6296 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6298 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6299 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6300 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6301 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
6302 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6303 # via BRL. That entry asserted <xmc#1>, but I've left that out because
6304 # neither earlier nor later ADMSs have it -- esr)
6306 # You will need to get into the supervisor setup before you can set
6307 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6308 # see a lot more setup options.
6310 # While in supervisor setup you can also use following codes:
6312 # Ctrl-P Personality character selections (configure for example what
6313 # arrow keys send, if I recall correctly)
6314 # Ctrl-T tabs 1-80 use left&right to move and up to set and
6315 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
6316 # Ctrl-B Binary setup (probably not needed. I think that everything can
6317 # be set using normal setup)
6318 # Ctrl-A Answerback mode (enter answerback message)
6319 # Ctrl-U User friendly mode (normal setup)
6320 # Ctrl-D Defaults entire setup and function keys from EPROM tables
6321 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
6322 # Ctrl-R Reads both setup and functions keys from NVM.
6323 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
6325 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6326 # RTS/CTS used nowadays with virtually every modem and computer. 19200
6327 # bps works fine with hardware flow control.
6329 # The following null-modem cable should fix this and enable you to use
6330 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6331 # set ADM-12+ for DTR handshaking from supervisor setup.
6344 OTbs, OTpt, am, mir,
6345 OTug#1, cols#80, it#8, lines#24,
6346 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6347 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6348 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
6349 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
6350 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6351 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6352 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
6354 # (adm20: removed obsolete ":kn#7:" -- esr)
6355 adm20|lear siegler adm20,
6357 cols#80, it#8, lines#24,
6358 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
6359 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
6360 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
6361 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
6363 adm21|lear siegler adm21,
6365 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
6366 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
6367 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6369 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
6370 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
6371 # removed bogus-looking \200 from before <cup>. -- esr)
6375 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6376 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6377 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
6378 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
6379 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6380 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6381 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
6382 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
6383 # ADM 31 DIP Switches
6385 # This information comes from two versions of the manual for the
6386 # Lear-Siegler ADM 31.
6390 # +-||||-------------------------------------+
6405 # +----------------------------------------------+
6406 # front of case (keyboard)
6408 # S1 - Data Rate - Modem
6409 # S2 - Data Rate - Printer
6410 # ------------------------
6412 # -------------------
6430 # S3 - Interface/Printer/Attributes
6431 # ---------------------------------
6432 # Printer Busy Control
6435 # off off off Busy not active, CD disabled
6436 # off off on Busy not active, CD enabled
6437 # off on off Busy active on J5-20, CD disabled
6438 # on off off Busy active on J5-19, CD disabled - Factory Set.
6439 # on off on Busy active on J5-19, CD enabled
6441 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
6443 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
6445 # sw6 ON enables printer BUSY active LOW - Factory Setting
6446 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
6448 # sw7 ON - steady cursor - Factory Setting
6449 # OFF - blinking cursor
6451 # sw8 ON causes selected attribute character to be displayed
6452 # OFF causes SPACE to be displayed instead - Factory Setting
6458 # sw4 sw1 sw2 sw3 sw4
6459 # ---------------------------
6460 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
6461 # Current Loop disabled - Factory Setting
6462 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
6464 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
6465 # Current Loop Disabled
6467 # sw5 ON disables dot stretching mode - Factory Setting
6468 # OFF enables dot stretching mode
6469 # sw6 ON enables blanking function
6470 # OFF enables underline function - Factory Setting
6471 # sw7 ON causes NULLS to be displayed as NULLS
6472 # OFF causes NULLS to be displayed as SPACES - Factory Setting
6474 # S5 - Word Structure
6475 # -------------------
6476 # sw1 ON enables BREAK key - Factory Setting
6477 # OFF disables BREAK key
6478 # sw2 ON selects 50Hz monitor refresh rate
6479 # OFF selects 60Hz monitor refresh rate - Factory Setting
6481 # Modem Port Selection
6484 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
6485 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
6486 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
6487 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
6488 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
6489 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
6490 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
6491 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
6493 # sw6 ON sends bit 8 a 1 (mark)
6494 # OFF sends bit 8 as 0 (space) - Factory Setting
6495 # sw7 ON selects Block Mode
6496 # OFF selects Conversation Mode - Factory Setting
6497 # sw8 ON selects Full Duplex operation
6498 # OFF selects Half Duplex operation - Factory Setting
6502 # sw1, sw2, sw6, sw7 Reserved - Factory 0
6504 # Printer Port Selection
6505 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
6507 # sw8 ON enables Printer Port
6508 # OFF disables Printer Port - Factory Setting
6510 # S7 - Polling Address
6511 # --------------------
6512 # sw1-7 Establish ASCII character which designates terminal polling address
6514 # OFF = logic 1 - Factory Setting
6515 # sw8 ON enables Polling Option
6516 # OFF disables Polling Option - Factory Setting
6519 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
6521 # This adm31 entry uses underline as the standout mode.
6522 # If the adm31 gives you trouble with standout mode, check the DIP switch in
6523 # position 6, bank @c11, 25% from back end of the circuit board. Should be
6524 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
6525 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
6526 adm31|lsi adm31 with sw6 set for underline mode,
6529 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6530 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6531 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
6532 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6533 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6534 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
6535 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
6536 adm31-old|o31|old adm31,
6537 rmul@, smso=\EG4, smul@, use=adm31,
6538 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
6542 if=/usr/share/tabset/vt100,
6543 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
6545 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
6549 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6550 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6551 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
6552 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
6553 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
6554 smir=\Eq, smul@, use=adm+sgr,
6555 # The following termcap for the Lear Siegler ADM-42 leaves the
6556 # "system line" at the bottom of the screen blank (for those who
6557 # find it distracting otherwise)
6558 adm42-ns|lsi adm-42 with no system line,
6559 cbt=\EI\EF \011, clear=\E;\EF \011,
6560 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
6561 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
6562 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
6563 smir=\Eq\EF \011, use=adm42,
6564 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
6565 # The insert mode of this terminal is commented out because it's broken for our
6566 # purposes in that it will shift the position of every character on the page,
6567 # not just the cursor line!
6568 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
6569 adm1178|1178|lsi adm1178,
6571 cols#80, lines#24, xmc#1,
6572 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
6573 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6574 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
6575 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
6576 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
6577 sgr0=\E), smso=\EG4, smul=\EG1,
6581 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
6582 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
6583 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
6585 # ComputerVision Services
6586 # 500 Old Connecticut Path
6590 # Standout mode is dim reverse-video.
6591 pt100|pt200|wren|fenix|prime pt100/pt200,
6593 cols#80, it#8, lines#24,
6594 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
6595 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
6596 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
6597 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
6598 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
6599 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
6600 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
6601 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
6603 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
6604 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
6605 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
6607 cup=\E[%i%p1%d;%p2%dH, use=pt100,
6609 rmso@, smso@, use=pt100,
6610 pt250w|Prime PT250 in 132-column mode,
6611 rmso@, smso@, use=pt100w,
6616 # 3475-A North 1st Street
6618 # Vox: (800)-457-4447
6619 # Fax: (408)-473-1510
6620 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
6622 # Qume was bought by Wyse, but still (as of early 1995) has its own support
6623 # group and production division.
6625 # Discontinued Qume models:
6627 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
6628 # built to replace them, and a qvt119+ which was a 101+ with available wide
6629 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
6630 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
6631 # ANSI-compatible terminals with the qvt323 and qvt61.
6633 # Current Qume models (as of February 1995):
6635 # All current Qume terminals have ANSI-compatible operation modes.
6636 # Qume is still producing the qvt62, which features emulations for other
6637 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
6638 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
6639 # with many emulations including Wyse370, Wyse 325, etc. Their newest
6640 # model is the qvt520, which is vt420-compatible.
6642 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
6644 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
6645 # setup mode. Shift-s should be a configuration save to NVRAM.
6647 qvt101|qvt108|qume qvt 101 and QVT 108,
6650 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
6651 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
6652 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
6653 # What seems to be going on here is that this entry was designed so that
6654 # the normal highlight is bold and standout is dim plus something else
6655 # (reverse-video maybe? But then, are there two <rev> sequences?)
6656 qvt101+|qvt101p|qume qvt 101 PLUS product,
6658 cols#80, lines#24, xmc#0,
6659 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
6660 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6661 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
6662 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
6663 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
6664 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
6665 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
6666 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
6667 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
6668 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6669 qvt102|qume qvt 102,
6670 cnorm=\E., use=qvt101,
6671 # (qvt103: added <rmam>/<smam> based on init string -- esr)
6672 qvt103|qume qvt 103,
6674 cols#80, it#8, lines#24, vt#3,
6675 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
6676 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
6677 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6678 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
6679 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
6680 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
6681 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6682 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
6683 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
6684 rmso=\E[m$<2>, rmul=\E[m$<2>,
6685 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6686 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
6687 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
6688 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
6689 qvt103-w|qume qvt103 132 cols,
6691 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
6692 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
6694 cols#80, lines#24, xmc#0,
6695 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
6696 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6697 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
6698 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
6699 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
6700 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
6701 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
6702 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6703 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
6704 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6705 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
6706 lines#25, use=qvt119+,
6707 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
6709 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
6710 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
6711 lines#25, use=qvt119+,
6712 qvt203|qvt203+|qume qvt 203 Plus,
6713 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
6714 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
6715 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
6716 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
6717 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
6719 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
6721 # Since a command is present for enabling 25 data lines,
6722 # a specific terminfo entry may be generated for the 203.
6723 # If one is desired for the QVT 119 PLUS then 25 lines must
6724 # be selected in the status line (setup line 9).
6726 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
6728 is2=\E[=40h\E[?3l, use=qvt203,
6729 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
6731 rs2=\E[?3h\E[=40h, use=qvt203,
6733 #### Televideo (tvi)
6736 # 550 East Brokaw Road
6737 # PO Box 49048 95161
6739 # Vox: (408)-954-8333
6740 # Fax: (408)-954-0623
6743 # These require incredible amounts of padding.
6745 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
6746 # Televideo terminals are ANSI and PC-ANSI compatible.
6748 tvi803|televideo 803,
6749 clear=\E*$<10>, use=tvi950,
6751 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
6752 # Switch settings are:
6773 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
6789 # U do CR/LF when CR received
6790 # D do CR when CR received
6812 # S2 6 Cursor down key
6816 # S2 7 Screen colour
6820 # S2 8 DSR status (pin 6)
6824 # S2 9 DCD status (pin 8)
6828 # S2 10 DTR status (pin 20)
6831 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
6832 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
6833 tvi910|televideo model 910,
6835 cols#80, it#8, lines#24, xmc#1,
6836 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6837 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
6838 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
6839 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
6840 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
6841 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6842 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6843 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
6844 # From: Alan R. Rogers <rogers%albany@csnet-relay>
6845 # as subsequently hacked over by someone at SCO
6846 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
6848 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
6851 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
6852 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
6853 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
6854 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
6857 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
6858 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
6859 # D U D D 8O1 D U U U 8E2
6861 # S1 9 Autowrap (U = on, D = off)
6862 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
6863 # S2 1 Mode (U = block, D = conversational)
6864 # S2 2 Duplex (U = half, D = full)
6865 # S2 3 Hertz (U = 50, D = 60)
6866 # S2 4 Edit mode (U = local, D = duplex)
6867 # S2 5 Cursor type (U = underline, D = block)
6868 # S2 6 Cursor down key (U = send ^J, D = send ^V)
6869 # S2 7 Screen colour (U = green on black, D = black on green)
6870 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
6871 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
6872 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
6874 tvi910+|televideo 910+,
6875 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
6876 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
6877 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
6878 ll=\E=7\s, use=tvi910,
6880 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
6881 # <khome> from BRL entry -- esr)
6882 tvi912|tvi914|tvi920|old televideo 912/914/920,
6883 OTbs, OTpt, am, msgr,
6884 cols#80, it#8, lines#24, xmc#1,
6885 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6886 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6887 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
6888 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
6889 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
6890 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
6891 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
6892 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
6894 # We got some new tvi912c terminals that act really weird on the regular
6895 # termcap, so one of our gurus worked this up. Seems that cursor
6896 # addressing is broken.
6897 tvi912cc|tvi912 at cowell college,
6900 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
6901 # From: Benjamin C. W. Sittler
6903 # Someone has put a scanned copy of the manual online at:
6904 # http://vt100.net/televideo/912b-om/
6906 # These terminals were produced ca. 1979, and had a 12" monochrome
6907 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
6908 # ASCII, and were generally similar to adm3a but with attributes
6909 # (including some with magic cookies), fancy half-duplex mode, and
6912 # Some operations reqire truly incredible amounts of padding. The
6913 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
6914 # are so slow as to be nearly unusable.
6916 # There may or may not have been a separate, earlier series of 912/920
6917 # terminals (without the "B" and "C" suffix); I have never seen one,
6918 # and the manual only describes the "B" and "C" series. The 912 and 920
6919 # are quite distinct from the 914 and 924, which were much nicer non-
6920 # magic-cookie terminals similar to the 950.
6922 # This is a new description for the following TeleVideo terminals,
6923 # distinguished chiefly by their keyboards:
6925 # TVI-912B - very odd layout, no function keys (84 keys)
6926 # TVI-920B - typewriter layout, no function keys (103 keys)
6927 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
6928 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
6930 # To choose a setting for the TERM variable, start with the model:
6932 # Model || base name
6933 # ----------||-----------
6934 # TVI-912B || tvi912b
6935 # TVI-912C || tvi912c
6936 # TVI-920B || tvi920b
6937 # TVI-920C || tvi920c
6939 # Then add a suffix from the following table describing installed options
6940 # and how you'd like to use the terminal:
6942 # Use Video | Second | Visual | Magic | Page || feature
6943 # Attributes | Page | Bell | Cookies | Print || suffix
6944 # ------------|--------|--------|---------|-------||---------
6945 # No | No | N/A | N/A | No || -unk
6946 # No | No | N/A | N/A | Yes || -p
6947 # No | Yes | No | N/A | No || -2p-unk
6948 # No | Yes | No | N/A | Yes || -2p-p
6949 # No | Yes | Yes | N/A | No || -vb-unk
6950 # No | Yes | Yes | N/A | Yes || -vb-p
6951 # Yes | No | N/A | No | N/A ||
6952 # Yes | No | N/A | Yes | N/A || -mc
6953 # Yes | Yes | No | No | N/A || -2p
6954 # Yes | Yes | No | Yes | N/A || -2p-mc
6955 # Yes | Yes | Yes | No | N/A || -vb
6956 # Yes | Yes | Yes | Yes | N/A || -vb-mc
6958 # So e.g. a model 920 C with second page memory option, visual bell
6959 # and no magic cookies would be tvi920c-vb; a model 912 B without the
6960 # second page memory option and using magic cookies would be
6965 # At 9600 baud, the terminal is prone to overflow its input buffer
6966 # during complex operations (insert/delete
6967 # character/line/screen/page), and it does not signal this over the
6968 # RS232 cable. The typical symptom of an overrun is that the terminal
6969 # starts beeping, and output becomes garbled.
6971 # The padding delays in this terminfo were derived using tack(1)
6972 # running on a Linux box connected to a TVI-920C with a later-model
6973 # (A49C1-style) ROM running at 9600 baud, so your mileage may
6974 # vary. The numbers below seem to give the terminal enough time so
6975 # that it doesn't overflow its input buffer and start losing
6980 # If you want to use the FUNCT key on a tvi912[bc], use the
6981 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
6982 # the following table (these also work on the 920 series):
6984 # Unshifted Function Keys:
6986 # Key | capname|| Equivalent
6987 # -----|--------||------------
6988 # F1 | <kf1> || FUNCT + @
6989 # F2 | <kf2> || FUNCT + A
6990 # F3 | <kf3> || FUNCT + B
6991 # F4 | <kf4> || FUNCT + C
6992 # F5 | <kf5> || FUNCT + D
6993 # F6 | <kf6> || FUNCT + E
6994 # F7 | <kf7> || FUNCT + F
6995 # F8 | <kf8> || FUNCT + G
6996 # F9 | <kf9> || FUNCT + H
6997 # F10 | <kf10> || FUNCT + I
6998 # F11 | <kf11> || FUNCT + J
7000 # Shifted Function Keys:
7002 # SHIFT + Key | capname|| Equivalent
7003 # -------------|--------||------------
7004 # SHIFT + F1 | <kf12> || FUNCT + `
7005 # SHIFT + F2 | <kf13> || FUNCT + a
7006 # SHIFT + F3 | <kf14> || FUNCT + b
7007 # SHIFT + F4 | <kf15> || FUNCT + c
7008 # SHIFT + F5 | <kf16> || FUNCT + d
7009 # SHIFT + F6 | <kf17> || FUNCT + e
7010 # SHIFT + F7 | <kf18> || FUNCT + f
7011 # SHIFT + F8 | <kf19> || FUNCT + g
7012 # SHIFT + F9 | <kf20> || FUNCT + h
7013 # SHIFT + F10 | <kf21> || FUNCT + i
7014 # SHIFT + F11 | <kf22> || FUNCT + j
7016 # PORTS AND SWITCH SETTINGS
7018 # Here are the switch settings for the TVI-912B/TVI-920B and
7019 # TVI-912C/TVI-920C:
7021 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7022 # 2: 9600 3: 4800 4: 2400 5: 1200
7023 # 6: 600 7: 300 8: 150 9: 75
7026 # S2 UART/Terminal options:
7028 # 1: Not used Not allowed
7029 # 2: Alternate character set Standard character set
7030 # 3: Full duplex Half duplex
7031 # 4: 50 Hz refresh 60 Hz refresh
7032 # 5: No parity Send parity
7033 # 6: 2 stop bits 1 stop bit
7034 # 7: 8 data bits 7 data bits
7035 # 8: Not used Not allowed on Rev E or lower
7036 # 9: Even parity Odd parity
7037 # 10: Steady cursor Blinking cursor
7038 # (On Rev E or lower, use W25 instead of switch 10.)
7040 # S5 UART/Terminal options:
7042 # 1: P3-6 Not connected DSR received on P3-6
7043 # 2: P3-8 Not connected DCD received on P3-8
7045 # 3 Open, 4 Open: P3-20 Not connected
7046 # 3 Open, 4 Closed: DTR on when terminal is on
7047 # 3 Closed, 4 Open: DTR is connected to RTS
7048 # 3 Closed, 4 Closed: Not allowed
7050 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7051 # all data transmitted out of the modem port (P3) will also be
7052 # transmitted out of the printer port (P4).
7054 # 6 Open, 7 Open: Not allowed
7055 # 6 Open, 7 Closed: 20ma current loop input
7056 # 6 Closed, 7 Open: RS232 input
7057 # 6 Closed, 7 Closed: Not allowed
7060 # If the jumper is installed, the effect will occur (the next time the terminal
7063 # S4/W31: Enables automatic LF upon receipt of CR from
7064 # remote or keyboard.
7065 # S4/W32: Enables transmission of EOT at the end of Send. If not
7066 # installed, a carriage return is sent.
7067 # S4/W33: Disables automatic carriage return in column 80.
7068 # S4/W34: Selects Page Print Mode as initial condition. If not
7069 # installed, Extension Mode is selected.
7071 # NON-STANDARD CAPABILITIES
7073 # Sending <u9> or <u7> returns a cursor position report in the format
7074 # YX\r, where Y and X are as in <cup>. This format is described in
7075 # <u8> and <u6>, but it's not clear how one should write an
7076 # appropriate scanf string, since we need to subtract %' ' from the
7077 # character after reading it. The <u9> capability is used by tack(1)
7078 # to synchronize during padding tests, and seems to work for that
7081 # This description also includes the obsolete termcap capabilities
7082 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7084 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7086 # The FUNCT modifier actually works with every normal key by sending
7087 # ^AX\r, where X is the sequence normally sent by that key. This is a
7088 # sort of meta key not currently describable in terminfo.
7090 # There are quite a few other keys (especially on the 920 models,) but
7091 # they are for the most part only useful in block mode.
7093 # These terminals have lots of forms manipulation features, mainly
7094 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7095 # spaces"; nulls are sentinels for "send X" operations); "send X"
7096 # operations for uploading all or part of the screen; and block-mode
7097 # editing keys (they don't send escape sequences, but manipulate video
7098 # memory directly). Block mode is used for local editing, and protect
7099 # mode (in conjunction with the "write protect" attribute,
7100 # a.k.a. half-intensity outside of protect mode) is used to control
7101 # which parts of the screen are edited/sent/printed (by <mc0>).
7103 # There are at least two major families of ROM, "early" and
7104 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7105 # support a few extra escape sequences for manipulating the off-screen
7106 # memory page, and for sending whole pages back to the host (mainly
7107 # useful in block mode.) The descriptions in this file don't use any
7108 # of those sequences: set cursor position including page (\E-PYX,
7109 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7110 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7111 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7112 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7113 # are as in <cup>, and some "send page" features mainly useful for
7114 # forms manipulation.
7116 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7117 # except that a terminal reset (<is2>) enables the keyboard.
7119 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7120 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7124 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7125 # sequences (I infer that in some TeleVideo terminal they may invert
7126 # and uninvert the display) so the <flash> sequence given here is a
7127 # cheesy page-flip instead.
7129 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7130 # tack(1), so it is not included in the descriptions below.
7132 # It's not clear whether auto_left_margin (<bw>) flag should be set
7133 # for these terminals; tack says yes, so it is set here, but this
7134 # differs from other descriptions I've seen.
7136 # Extension print mode (<mc5>) echoes all characters to the printer
7137 # port [in addition to displaying them] except for the page print mode
7138 # sequence (<mc4>); this is a slight violation of the terminfo
7139 # definition for <mc5> but I don't expect it to cause problems. We
7140 # reset to page print mode in <rs1> since it may have been enabled
7143 # The descriptions with plus signs (+) are building blocks.
7145 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7147 cols#80, it#8, lines#24,
7148 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7149 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7150 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7151 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7152 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7153 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7154 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7155 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7156 u7=\E?, u8=%c%c\r, u9=\E?,
7158 # This isn't included in the basic capabilities because it is
7159 # typically unusable in combination with the full range of video
7160 # attributes, since the magic cookie attributes turn into ASCII
7161 # control characters, and the half-intensity ("protected") attribute
7162 # converts all affected characters to spaces.
7164 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7167 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7168 # exposes no other attributes (half-intensity is the only attribute
7169 # that does not generate a magic cookie.)
7171 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7173 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7176 # Full magic-cookie attribute support, with half-intensity reverse
7177 # video for standout. Note that we add a space in the <dim> sequence
7178 # to give a consistent magic-cookie count. Also note that <sgr> uses
7179 # backspacing (in the TVI-supported order) to apply all requested
7180 # attributes with only a single magic cookie.
7182 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7184 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7186 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7187 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7189 # This uses the second page memory option to save & restore screen
7190 # contents. If your terminal is missing the option, this description
7191 # should still work, but that has not been tested.
7193 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7194 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7195 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7197 # This simulates flashing by briefly toggling to the other page
7200 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7201 bel=\EK$<100>\EK, use=tvi912b+2p,
7203 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7205 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7206 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7207 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7208 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7209 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7210 kf8=^AG\r, kf9=^AH\r,
7212 # Combinations of the basic building blocks
7214 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7215 use=tvi912b+2p, use=tvi912b-unk,
7217 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7218 use=tvi912b+vb, use=tvi912b-unk,
7220 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7221 use=tvi912b+printer, use=tvi912b-unk,
7223 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7224 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7226 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7227 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7229 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7230 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7232 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7233 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7235 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7236 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7238 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7239 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7241 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7242 use=tvi912b+dim, use=tvi912b-unk,
7244 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7245 use=tvi912b+mc, use=tvi912b-unk,
7247 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7248 use=tvi920b+fn, use=tvi912b-unk,
7250 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7251 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7253 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7254 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7256 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7257 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7259 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7260 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7263 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7264 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7267 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7268 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7271 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7272 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7275 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7276 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7279 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7280 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7283 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7284 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7286 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7287 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7289 # Televideo 921 and variants
7290 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7291 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7292 # also added empty <acsc> to suppress tic warning -- esr)
7293 tvi921|televideo model 921 with sysline same as page & real vi function,
7294 OTbs, OTpt, am, hs, xenl, xhp,
7295 cols#80, lines#24, xmc#0,
7296 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7297 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7298 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7299 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7300 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7301 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7302 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7303 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7304 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7305 # without the beeper
7306 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7307 # also added empty <acsc> to suppress tic warning -- esr)
7308 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7310 cols#80, lines#24, xmc#0,
7311 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7312 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7313 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7314 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
7315 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7316 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
7317 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
7318 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
7319 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7320 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
7321 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
7322 dl1=\ER$<2*/>, il1=\EE$<2*/>,
7323 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
7324 kil1=\EE$<2*/>, use=tvi92B,
7326 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
7327 # in from a BSD termcap file because it looks like they do something the
7328 # old ones skip -- esr)
7329 tvi924|televideo tvi924,
7330 am, bw, hs, in, mir, msgr, xenl, xon,
7331 cols#80, it#8, lines#24, wsl#80, xmc#0,
7332 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
7333 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
7334 cub1=^H, cud1=^V, cuf1=^L,
7335 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
7336 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
7337 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
7338 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7339 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
7340 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7341 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
7342 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
7343 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
7344 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
7345 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
7346 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
7347 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
7350 # TVI925 DIP switches. In each of these, D = Down and U = Up,
7352 # Here are the settings for the external (baud) switches (S1):
7355 # 7 8 9 10 [Printer]
7356 # 1 2 3 4 [Main RS232]
7357 # -----------------------------------------------------
7376 # Settings for word length and stop-bits (S1)
7378 # Position Description
7380 # ---------------------------
7387 # S2 (external) settings
7389 # Position Up Dn Description
7390 # --------------------------------------------
7392 # X Duplex edit (transmit editing keys)
7393 # --------------------------------------------
7394 # 2 X 912/920 emulation
7396 # --------------------------------------------
7400 # --------------------------------------------
7404 # --------------------------------------------
7408 # --------------------------------------------
7412 # --------------------------------------------
7416 # --------------------------------------------
7417 # 6 X White on black display
7418 # X Black on white display
7419 # --------------------------------------------
7422 # --------------------------------------------
7425 # --------------------------------------------
7428 # --------------------------------------------
7431 # --------------------------------------------
7432 # 10 X CR/LF (Auto LF)
7435 # S3 (internal switch) settings:
7437 # Position Up Dn Description
7438 # --------------------------------------------
7441 # --------------------------------------------
7444 # --------------------------------------------
7447 # --------------------------------------------
7450 # --------------------------------------------
7453 # --------------------------------------------
7454 # 4 X Blinking block cursor
7456 # --------------------------------------------
7457 # 4 X Blinking underline cursor
7459 # --------------------------------------------
7460 # 4 X Steady block cursor
7462 # --------------------------------------------
7463 # 4 X Steady underline cursor
7465 # --------------------------------------------
7466 # 6 X Screen blanking timer (ON)
7467 # X Screen blanking timer (OFF)
7468 # --------------------------------------------
7469 # 7 X Page attributes
7471 # --------------------------------------------
7472 # 8 X DCD disconnected
7474 # --------------------------------------------
7475 # 9 X DSR disconnected
7477 # --------------------------------------------
7478 # 10 X DTR Disconnected
7480 # --------------------------------------------
7482 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
7483 tvi925|televideo 925,
7484 OTbs, am, bw, hs, ul,
7485 cols#80, lines#24, xmc#1,
7486 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
7487 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7488 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
7489 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
7490 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
7491 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
7492 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7493 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7494 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
7495 tsl=\Eh\Ef, use=adm+sgr,
7496 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
7497 # to avoid "magic cookie" standout glitch:
7498 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
7500 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
7502 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
7503 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
7504 # for additional capabilities,
7505 # The following tvi descriptions from B:pjphar and virus!mike
7506 # is for all 950s. It sets the following attributes:
7507 # full duplex (\EDF) write protect off (\E()
7508 # conversation mode (\EC) graphics mode off (\E%)
7509 # white on black (\Ed) auto page flip off (\Ew)
7510 # turn off status line (\Eg) clear status line (\Ef\r)
7511 # normal video (\E0) monitor mode off (\EX or \Eu)
7512 # edit mode (\Er) load blank char to space (\Ee\040)
7513 # line edit mode (\EO) enable buffer control (^O)
7514 # protect mode off (\E\047) duplex edit keys (\El)
7515 # program unshifted send key to send line all (\E016)
7516 # program shifted send key to send line unprotected (\E004)
7517 # set the following to nulls:
7518 # field delimiter (\Ex0\200\200)
7519 # line delimiter (\Ex1\200\200)
7520 # start-protected field delimiter (\Ex2\200\200)
7521 # end-protected field delimiter (\Ex3\200\200)
7522 # set end of text delimiter to carriage return/null (\Ex4\r\200)
7524 # TVI 950 Switch Setting Reference Charts
7528 # S1 1 2 3 4 5 6 7 8 9 10
7529 # +-----------------------+-----+-----+-----------------------+
7530 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
7532 # +------+-----------------------+-----+-----+-----------------------+
7533 # | Up | See | 7 | 2 | See |
7534 # +------+-----------------------+-----+-----+-----------------------+
7535 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
7536 # +------+-----------------------+-----+-----+-----------------------+
7539 # S2 1 2 3 4 5 6 7 8 9 10
7540 # +-----+-----+-----------------+-----+-----------+-----+-----+
7541 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
7542 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7543 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
7544 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7545 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
7546 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7550 # +-----------+-----+-----+-----+-----+-----------+
7551 # | Display | 1 | 2 | 3 | 4 | Baud |
7552 # +-----------+-----+-----+-----+-----+ |
7553 # | Printer | 7 | 8 | 9 | 10 | Rate |
7554 # +-----------+-----+-----+-----+-----+-----------+
7555 # | D | D | D | D | 9600 |
7556 # | U | D | D | D | 50 |
7557 # | D | U | D | D | 75 |
7558 # | U | U | D | D | 110 |
7559 # | D | D | U | D | 135 |
7560 # | U | D | U | D | 150 |
7561 # | D | U | U | D | 300 |
7562 # | U | U | U | D | 600 |
7563 # | D | D | D | U | 1200 |
7564 # | U | D | D | U | 1800 |
7565 # | D | U | D | U | 2400 |
7566 # | U | U | D | U | 3600 |
7567 # | D | D | U | U | 4800 |
7568 # | U | D | U | U | 7200 |
7569 # | D | U | U | U | 9600 |
7570 # | U | U | U | U | 19200 |
7571 # +-----+-----+-----+-----+-----------+
7574 # +-----+-----+-----+-----------+
7575 # | 3 | 4 | 5 | Parity |
7576 # +-----+-----+-----+-----------+
7577 # | X | X | D | None |
7578 # | D | D | U | Odd |
7579 # | D | U | U | Even |
7580 # | U | D | U | Mark |
7581 # | U | U | U | Space |
7582 # +-----+-----+-----+-----------+
7586 # +-----+-----+-----------------+
7587 # | 7 | 8 | Communication |
7588 # +-----+-----+-----------------+
7589 # | D | D | Half Duplex |
7590 # | D | U | Full Duplex |
7593 # +-----+-----+-----------------+
7595 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
7596 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
7597 # should be present and all tvi native modes use the same string for this.
7598 # Finally, note that BSD has cud1=^V. -- esr)
7599 tvi950|televideo 950,
7600 OTbs, am, hs, mir, msgr, xenl, xon,
7601 cols#80, it#8, lines#24, xmc#1,
7602 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
7603 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7604 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7605 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
7606 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
7608 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
7609 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
7610 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
7611 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7612 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7613 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
7614 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
7617 # is for 950 with two pages adds the following:
7618 # set 48 line page (\E\\2)
7619 # place cursor at page 0, line 24, column 1 (\E-07 )
7620 # set local (no send) edit keys (\Ek)
7622 # two page 950 adds the following:
7623 # when entering ex, set 24 line page (\E\\1)
7624 # when exiting ex, reset 48 line page (\E\\2)
7625 # place cursor at 0,24,1 (\E-07 )
7626 # set duplex (send) edit keys (\El) when entering vi
7627 # set local (no send) edit keys (\Ek) when exiting vi
7629 tvi950-2p|televideo950 w/2 pages,
7630 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
7631 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7632 smkx=\El, use=tvi950,
7634 # is for 950 with four pages adds the following:
7635 # set 96 line page (\E\\3)
7636 # place cursor at page 0, line 24, column 1 (\E-07 )
7638 # four page 950 adds the following:
7639 # when entering ex, set 24 line page (\E\\1)
7640 # when exiting ex, reset 96 line page (\E\\3)
7641 # place cursor at 0,24,1 (\E-07 )
7643 tvi950-4p|televideo950 w/4 pages,
7644 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
7645 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7646 smkx=\El, use=tvi950,
7648 # <is2> for reverse video 950 changes the following:
7649 # set reverse video (\Ed)
7651 # set vb accordingly (\Ed ...delay... \Eb)
7653 tvi950-rv|televideo950 rev video,
7654 flash=\Ed$<200/>\Eb,
7655 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
7658 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
7659 tvi950-rv-2p|televideo950 rev video w/2 pages,
7660 flash=\Ed$<200/>\Eb,
7661 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
7662 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7663 smkx=\El, use=tvi950,
7665 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
7666 tvi950-rv-4p|televideo950 rev video w/4 pages,
7667 flash=\Ed$<200/>\Eb,
7668 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
7669 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7670 smkx=\El, use=tvi950,
7671 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
7672 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
7673 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
7674 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
7675 # the :ko: string had :cl: in it, which means that one of the original
7676 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
7677 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
7678 # ko implies -- esr)
7679 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
7681 tvi955|televideo 955,
7684 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
7685 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
7686 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
7687 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
7688 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
7689 rmam=\E[=7l, rmxon=^N,
7690 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
7691 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
7693 tvi955-w|955-w|televideo955 w/132 cols,
7695 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
7696 # use half-intensity as normal mode, full intensity as <bold>
7697 tvi955-hb|955-hb|televideo955 half-bright,
7698 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
7699 sgr0=\EG0\E[=5h, use=tvi955,
7700 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
7701 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
7702 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
7703 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
7704 # it does to the function keys. I deduced <rmam>/<smam>.
7705 # also added empty <acsc> to suppress tic warning, -- esr)
7706 tvi970|televideo 970,
7707 OTbs, OTpt, am, da, db, mir, msgr,
7708 cols#80, it#8, lines#24,
7709 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
7710 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
7711 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
7712 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
7713 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
7714 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
7715 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7716 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
7717 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
7718 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7719 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
7720 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
7721 smul=\E[4m, vpa=\E[%i%p1%dd,
7722 tvi970-vb|televideo 970 with visual bell,
7723 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7725 tvi970-2p|televideo 970 with using 2 pages of memory,
7726 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
7728 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
7729 # per line (rather than 40), Esc K chooses the normal character set. Not sure
7730 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
7731 # <smul> strings are klutzy, but at least use no screen space.
7732 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
7733 # its absence means <smam>=\Ev isn't safe to use. -- esr)
7734 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
7735 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
7736 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
7737 tvipt|televideo personal terminal,
7740 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
7741 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
7742 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
7743 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
7744 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
7745 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
7746 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
7747 tvi9065|televideo 9065,
7748 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
7749 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
7751 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
7752 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
7753 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
7754 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
7755 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
7756 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
7757 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
7758 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7759 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
7760 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
7762 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
7763 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
7764 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7765 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
7766 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7767 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
7768 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
7769 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
7770 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
7771 pfx=\E|%p1%{48}%+%c1%p2%s\031,
7772 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
7773 rep=\E[%p2%db%p1%c, rev=\EG4,
7774 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
7775 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
7776 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
7777 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
7778 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
7779 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
7780 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
7781 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
7782 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
7783 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
7787 # In September 1993, Visual Technology of Westboro, Massachusetts,
7788 # merged with White Pine Software of Nashua, New Hampshire.
7790 # White Pine Software may be contacted at +1 603/886-9050.
7791 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
7794 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
7795 # Recently I hacked together the following termcap for Visual
7796 # Technology's Visual 50 terminal. It's a slight modification of
7798 # It's intended to run when the Visual 50 is in vt52 emulation mode
7799 # (I know what you're thinking; if it's emulating a vt52, then why
7800 # another termcap? Well, it turns out that the Visual 50 can handle
7801 # <dl1> and db(?) among other things, which the vt52 can't)
7802 # The termcap works OK for the most part. The only problem is on
7803 # character inserts. The whole line gets painfully redrawn for each
7804 # character typed. Any suggestions?
7805 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
7806 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
7807 # disguise; <kf7>-<kf9> are really l1-l3.
7809 OTbs, OTpt, am, da, db, msgr,
7810 cols#80, it#8, lines#24,
7811 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
7812 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7813 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
7814 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7815 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
7816 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
7817 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
7818 # this one was BSD & SCO's vi50
7819 vi50adm|visual 50 in adm3a mode,
7821 cols#80, it#8, lines#24,
7822 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7823 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
7824 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
7825 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
7827 # From: Jeff Siegal <jbs@quiotix.com>
7829 OTbs, am, mir, msgr,
7830 cols#80, it#8, lines#24,
7831 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
7832 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7833 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
7834 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
7835 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
7838 # Visual 200 from BRL
7839 # The following switch settings are assumed for normal operation:
7840 # FULL_DUPLEX SCROLL CR
7841 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
7842 # Other switches may be set for operator convenience or communication
7844 # Character insertion is kludged in order to get around the "beep" misfeature.
7845 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
7846 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
7847 # and <dl1> strings, but we seem to get along fine without them.
7849 OTbs, OTpt, am, mir, msgr,
7850 OTkn#10, cols#80, it#8, lines#24,
7851 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
7852 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7853 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
7854 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
7855 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7856 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
7857 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
7858 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
7859 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
7860 rmacs=\EG, rmkx=\E>, rmso=\E3,
7861 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
7862 smkx=\E=, smso=\E4, tbc=\Eg,
7863 # The older Visuals didn't come with function keys. This entry uses
7864 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
7865 # If your version of vi doesn't support function keys you may want
7867 vi200-f|visual 200 no function keys,
7868 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
7869 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
7870 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
7872 vi200-rv|visual 200 reverse video,
7873 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
7875 # the function keys are programmable but we don't reprogram them to their
7876 # default values with <is2> because programming them is very verbose. maybe
7877 # an initialization file should be made for the 300 and they could be stuck
7879 # (vi300: added <rmam>/<smam> based on init string -- esr)
7880 vi300|visual 300 ansi x3.64,
7883 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
7884 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7885 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7887 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
7888 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7889 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
7890 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
7891 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
7892 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
7893 smso=\E[1m, smul=\E[4m,
7894 # some of the vi300s have older firmware that has the command
7895 # sequence for setting editing extent reversed.
7896 vi300-old|visual 300 with old firmware (set edit extent reversed),
7897 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
7900 # Visual 500 prototype entry from University of Wisconsin.
7901 # The best place to look for the escape sequences is page A1-1 of the
7902 # Visual 500 manual. The initialization sequence given here may be
7903 # overkill, but it does leave out some of the initializations which can
7904 # be done with the menus in set-up mode.
7905 # The :xp: line below is so that emacs can understand the padding requirements
7906 # of this slow terminal. :xp: is 10 time the padding factor.
7907 # (vi500: removed unknown :xp#4: termcap;
7908 # also added empty <acsc> to suppress tic warning -- esr)
7911 cols#80, it#8, lines#33,
7912 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
7913 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
7914 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7915 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
7916 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
7918 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
7919 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7920 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
7921 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
7923 # The visual 550 is a visual 300 with tektronix graphics,
7924 # and with 33 lines. clear screen is modified here to
7925 # also clear the graphics.
7926 vi550|visual 550 ansi x3.64,
7928 clear=\030\E[H\E[2J, use=vi300,
7930 vi603|visual603|visual 603,
7932 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
7933 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
7934 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7935 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
7936 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
7937 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
7938 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
7944 # 3471 North First Street
7945 # San Jose, CA 95134
7946 # Vox: (408)-473-1200
7947 # Fax: (408) 473-1222
7948 # Web: http://www.wyse.com
7950 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
7951 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
7952 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
7953 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
7955 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
7956 # They now own the Qume and Amdek brands, too. So these are the people to
7957 # talk with about all Link, Qume, and Amdek terminals.
7959 # These entries include a few small fixes.
7960 # I canceled the bel capacities in the vb entries.
7961 # I made two trivial syntax fixes in the wyse30 entry.
7962 # I made some entries relative to adm+sgr.
7965 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
7967 # Although the Wyse 30 can support more than one attribute
7968 # it requires magic cookies to do so. Many applications do not
7969 # function well with magic cookies. The following terminfo uses
7970 # the protect mode to support one attribute (dim) without cookies.
7971 # If more than one attribute is needed then the wy30-mc terminfo
7974 wy30|wyse30|Wyse 30,
7975 am, bw, hs, mc5i, mir, msgr, xon,
7976 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
7977 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
7978 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
7979 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7980 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
7981 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
7982 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
7983 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
7984 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
7985 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
7986 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7987 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
7988 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
7989 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
7990 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
7991 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
7992 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
7993 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
7994 smso=\E`7\E), tbc=\E0, tsl=\EF,
7996 # This terminal description uses the non-hidden attribute mode
7997 # (with magic cookie).
7999 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8000 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8003 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8004 rmcup=\EG0, rmso=\EG0,
8005 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8006 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8007 smso=\EG4, use=wy30, use=adm+sgr,
8008 # The mandatory pause used by <flash> does not work with
8009 # older versions of terminfo. If you see this effect then
8010 # unset xon and delete the / from the delay.
8011 # i.e. change $<100/> to $<100>
8012 wy30-vb|wyse30-vb|wyse 30 visible bell,
8015 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8016 # Normal) without magic cookies by using the protect mode.
8017 # The following description uses this feature, but when more
8018 # than one attribute is put on the screen at once, all attributes
8019 # will be changed to be the same as the last attribute given.
8020 # The Wyse 50 can support more attributes when used with magic
8021 # cookies. The wy50-mc terminal description uses magic cookies
8022 # to correctly handle multiple attributes on a screen.
8024 wy50|wyse50|Wyse 50,
8025 am, bw, hs, mc5i, mir, msgr, xon,
8026 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8027 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8028 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8029 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8030 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8031 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8032 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8033 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8034 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8035 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8036 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8037 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8038 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8039 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8040 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8041 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8042 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8043 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8044 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8045 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8046 smso=\E`6\E), tbc=\E0, tsl=\EF,
8048 # This terminal description uses the non-hidden attribute mode
8049 # (with magic cookie).
8051 # The mandatory pause used by flash does not work with some
8052 # older versions of terminfo. If you see this effect then
8053 # unset <xon> and delete the / from the delay.
8054 # i.e. change $<100/> to $<100>
8055 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8056 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8059 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8060 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8061 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8062 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8063 smso=\EGt, use=wy50, use=adm+sgr,
8064 wy50-vb|wyse50-vb|wyse 50 visible bell,
8066 wy50-w|wyse50-w|wyse 50 132-column,
8067 cols#132, lw#7, nlab#16, wsl#97,
8068 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8070 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8074 # The Wyse 350 is a Wyse 50 with color.
8075 # Unfortunately this means that it has magic cookies.
8076 # The color attributes are designed to overlap the reverse, dim and
8077 # underline attributes. This is nice for monochrome applications
8078 # because you can make underline stuff green (or any other color)
8079 # but for true color applications it's not so hot because you cannot
8080 # mix color with reverse, dim or underline.
8081 # To further complicate things one of the attributes must be
8082 # black (either the foreground or the background). In reverse video
8083 # the background changes color with black letters. In normal video
8084 # the foreground changes colors on a black background.
8085 # This terminfo uses some of the more advanced features of curses
8086 # to display both color and blink. In the final analysis I am not
8087 # sure that the wy350 runs better with this terminfo than it does
8088 # with the wy50 terminfo (with user adjusted colors).
8090 # The mandatory pause used by flash does not work with
8091 # older versions of terminfo. If you see this effect then
8092 # unset xon and delete the / from the delay.
8093 # i.e. change $<100/> to $<100>
8095 # Bug: The <op> capability resets attributes.
8096 wy350|wyse350|Wyse 350,
8097 am, bw, hs, mc5i, mir, xon,
8098 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8100 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8101 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8102 cub1=^H, cud1=^J, cuf1=^L,
8103 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8104 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8105 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8106 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8107 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8108 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8109 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8110 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8111 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8112 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8113 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8114 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8115 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8116 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8117 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8118 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8119 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8120 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8121 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8122 wy350-vb|wyse350-vb|wyse 350 visible bell,
8124 wy350-w|wyse350-w|wyse 350 132-column,
8125 cols#132, lw#7, nlab#16, wsl#97,
8126 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8128 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8131 # This terminfo description is untested.
8132 # The wyse100 emulates an adm31, so the adm31 entry should work.
8136 cols#80, lines#24, xmc#1,
8137 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8138 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8139 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8140 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8141 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8142 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8143 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8145 # The Wyse 120/150 has most of the features of the Wyse 60.
8146 # This terminal does not need padding up to 9600 baud!
8147 # <msgr> should be set but the clear screen fails when in
8148 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8151 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8152 am, bw, hs, km, mc5i, mir, msgr, xon,
8153 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8154 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8155 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8156 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8157 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8158 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8159 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8160 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8161 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8162 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8163 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8164 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8165 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8166 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8167 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8168 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8169 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8170 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8171 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8172 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8173 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8174 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8176 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8177 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8178 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8179 tbc=\E0, tsl=\EF, use=adm+sgr,
8181 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8182 cols#132, lw#7, nlab#16, wsl#97,
8183 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8184 rs2=\E`;$<70>, use=wy120,
8186 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8187 lh@, lines#25, lw@, nlab@,
8188 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8190 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8191 lh@, lines#25, lw@, nlab@,
8192 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8194 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8197 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8200 # The Wyse 60 is like the Wyse 50 but with more padding.
8201 # The reset strings are slow and the pad times very depending
8202 # on other parameters such as font loading. I have tried
8203 # to follow the following outline:
8205 # <rs1> -> set personality
8206 # <rs2> -> set number of columns
8207 # <rs3> -> set number of lines
8208 # <is1> -> select the proper font
8209 # <is2> -> do the initialization
8210 # <is3> -> set up display memory (2 pages)
8212 # The Wyse 60's that have vt100 emulation are slower than the
8213 # older Wyse 60's. This change happened mid-1987.
8214 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8216 # The meta key is only half right. This terminal will return the
8217 # high order bit set when you hit CTRL-function_key
8219 # It may be useful to assign two function keys with the
8220 # values \E=(\s look at old data in page 1
8221 # \E=W, look at bottom of page 1
8222 # where \s is a space ( ).
8225 # The Wyse 60 runs faster when the XON/XOFF
8226 # handshake is turned off.
8228 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8229 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8230 wy60|wyse60|Wyse 60,
8231 am, bw, hs, km, mc5i, mir, msgr,
8232 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8233 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8234 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8235 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8236 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8237 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8238 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8239 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8240 ip=$<3>, is1=\EcB0\EcC1,
8241 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8242 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8243 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8244 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8245 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8246 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8247 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8248 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8249 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8250 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8251 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8252 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8253 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8254 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8255 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8256 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8257 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8258 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8259 tbc=\E0, tsl=\EF, use=adm+sgr,
8261 wy60-w|wyse60-w|wyse 60 132-column,
8262 cols#132, lw#7, nlab#16, wsl#97,
8263 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8264 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8266 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8267 lh@, lines#25, lw@, nlab@,
8268 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8269 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8270 lh@, lines#25, lw@, nlab@,
8271 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8273 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8275 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8276 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8277 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8278 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8279 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8280 cols#132, lw#7, nlab#16, wsl#97,
8281 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8282 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8283 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8285 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8286 lh@, lines#43, lw@, nlab@,
8287 pln@, rs3=\Ee+$<150>, use=wy60-42,
8288 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8289 lh@, lines#43, lw@, nlab@,
8290 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8292 wy60-vb|wyse60-vb|Wyse 60 visible bell,
8294 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8297 # The Wyse-99GT looks at lot like the Wyse 60 except that it
8298 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
8299 # setup parameter controls the number of lines on the screen.
8300 # For the Wyse 99GT the "lines" setup parameter controls the
8301 # number of lines in a page. The screen can display 25 lines max.
8302 # The Wyse-99GT also has personalities for the VT220 and
8303 # Tektronix 4014. But this has no bearing on the native mode.
8305 # (msgr) should be set but the clear screen fails when in
8306 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8307 # then set msgr, else use msgr@.
8309 # u0 -> enter Tektronix mode
8310 # u1 -> exit Tektronix mode
8312 wy99gt|wyse99gt|Wyse 99gt,
8314 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
8315 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
8316 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
8317 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
8318 u0=\E~>\E8, u1=\E[42h, use=wy60,
8320 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
8321 cols#132, lw#7, nlab#16, wsl#97,
8322 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8323 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
8326 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
8327 lh@, lines#25, lw@, nlab@,
8328 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8330 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
8331 lh@, lines#25, lw@, nlab@,
8332 pln@, rs2=\E`;$<150>, use=wy99gt-w,
8334 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
8337 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
8340 # Can't set tabs! Other bugs (ANSI mode only):
8341 # - can't redefine function keys (anyway, key redefinition in ANSI mode
8342 # is too much complex to be described);
8343 # - meta key can't be described (the terminal forgets it when reset);
8344 # The xon-xoff handshaking can't be disabled while in ansi personality, so
8345 # emacs can't work at speed greater than 9600 baud. No padding is needed at
8347 # dch1 has been commented out because it causes annoying glittering when
8348 # vi deletes one character at the beginning of a line with tabs in it.
8349 # dch makes sysgen(1M) have a horrible behaviour when deleting
8350 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
8351 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
8352 # not, so smir and rmir are commented out as well.
8353 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8354 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
8355 am, km, mc5i, mir, msgr, xenl,
8356 cols#80, it#8, lines#25, vt#3,
8357 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
8358 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8359 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
8360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
8361 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
8362 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
8363 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8364 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
8365 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
8366 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
8367 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
8368 il1=\E[L, ind=\n$<1>, invis=\E[8m,
8369 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
8370 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8371 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8372 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
8373 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
8374 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
8375 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
8376 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
8377 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8378 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
8379 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
8381 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
8382 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
8383 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8385 # This is the american terminal. Here tabs work fine.
8386 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8387 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
8388 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
8390 # This terminal (firmware version 02) has a lot of bugs:
8392 # - other bugs in ANSI modes (see above).
8393 # This description disables handshaking when using cup. This is because
8394 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
8395 # cannot be used at speeds greater than 9600 baud, because at greater
8396 # speeds handshaking is needed even for character sending. If you use
8397 # DTR handshaking, you can use even greater speeds.
8398 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8399 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
8400 am, bw, hs, km, mc5i, mir, msgr, xon,
8401 cols#80, it#8, lines#25, wsl#46,
8402 acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
8403 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
8404 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
8405 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8406 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
8407 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
8408 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
8410 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
8411 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
8412 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
8413 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
8414 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
8415 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
8416 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8417 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
8418 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
8419 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
8420 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
8421 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
8422 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
8423 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
8425 # This is the american terminal. Here tabs work.
8426 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8427 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
8428 hts=\E1, tbc=\E0, use=wy99f,
8431 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
8432 # The reset strings are slow and the pad times very depending
8433 # on other parameters such as font loading. I have tried
8434 # to follow the following outline:
8436 # <rs1> -> set personality
8437 # <rs2> -> set number of columns
8438 # <rs3> -> set number of lines
8439 # <is1> -> select the proper font
8440 # <is2> -> do the initialization
8441 # <is3> -> set up display memory (2 pages)
8443 # The display memory may be used for either text or graphics.
8444 # When "Display Memory = Shared" the terminal will have more pages
8445 # but garbage may be left on the screen when you switch from
8446 # graphics to text. If "Display Memory = Unshared" then the
8447 # text area will be only one page long.
8449 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
8450 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8451 wy160|wyse160|Wyse 160,
8452 am, bw, hs, km, mc5i, mir, msgr,
8453 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
8454 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8455 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
8456 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8457 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
8458 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
8459 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
8460 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
8461 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8462 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8463 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8464 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8465 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8466 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8467 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8468 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8469 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
8470 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8471 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8472 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
8473 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
8474 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
8475 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
8476 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8477 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8478 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8479 tbc=\E0, tsl=\EF, use=adm+sgr,
8481 wy160-w|wyse160-w|wyse 160 132-column,
8482 cols#132, lw#7, nlab#16, wsl#90,
8483 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
8484 rs2=\EeF$<150>\E`;$<150>, use=wy160,
8486 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
8487 lh@, lines#25, lw@, nlab@,
8488 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
8489 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
8490 lh@, lines#25, lw@, nlab@,
8491 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
8493 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
8495 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
8496 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
8497 rs3=\Ee*$<150>, use=wy160,
8498 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
8499 cols#132, lw#7, nlab#16, wsl#90,
8500 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
8501 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
8503 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
8504 lh@, lines#43, lw@, nlab@,
8505 pln@, rs3=\Ee+$<150>, use=wy160-42,
8506 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
8507 lh@, lines#43, lw@, nlab@,
8508 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
8510 wy160-vb|wyse160-vb|Wyse 160 visible bell,
8512 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
8515 # The Wyse 75 is a vt100 lookalike without advanced video.
8517 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
8518 # Underline) without magic cookies. The following description
8519 # uses this capability, but when more than one attribute is
8520 # put on the screen at once, all attributes will be changed
8521 # to be the same as the last attribute given.
8522 # The Wyse 75 can support more attributes when used with magic
8523 # cookies. The wy75-mc terminal description uses magic cookies
8524 # to correctly handle multiple attributes on a screen.
8526 wy75|wyse75|wyse 75,
8527 am, hs, mc5i, mir, msgr, xenl, xon,
8528 cols#80, lines#24, ma#1, pb#1201, wsl#78,
8529 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8530 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
8531 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
8532 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8533 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8534 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
8535 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
8536 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
8537 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
8538 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
8539 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8540 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8541 ind=\n$<2>, ip=$<1>,
8542 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
8543 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
8544 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
8545 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8546 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8547 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
8548 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
8549 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8550 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
8551 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
8552 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
8553 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
8554 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
8556 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
8557 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8558 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
8559 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
8561 # This terminal description uses the non-hidden attribute mode
8562 # (with magic cookie).
8564 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
8567 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
8568 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
8569 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
8570 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
8572 wy75-vb|wyse75-vb|wyse 75 with visible bell,
8575 wy75-w|wyse75-w|wyse 75 in 132 column mode,
8577 rs2=\E[35h\E[?3h$<80>, use=wy75,
8578 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
8582 # Wyse 85 emulating a vt220 7 bit mode.
8583 # 24 line screen with status line.
8585 # The vt220 mode permits more function keys but it wipes out
8586 # the escape key. I strongly recommend that <f11> be set to
8588 # The terminal may have to be set for 8 data bits and 2 stop
8589 # bits for the arrow keys to work.
8590 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
8591 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
8592 # <dch> leave trash on the screen when used without XON/XOFF.
8594 wy85|wyse85|wyse 85,
8595 am, hs, mc5i, mir, msgr, xenl, xon,
8596 cols#80, it#8, lines#24, wsl#80,
8597 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8598 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8599 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8600 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8601 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8602 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8603 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8604 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8605 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8606 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8607 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8608 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8609 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8610 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8611 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8612 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
8613 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8614 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8615 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
8616 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
8617 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
8618 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8619 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8620 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8621 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8623 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8624 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8625 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8626 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
8628 # Wyse 85 with visual bell.
8629 wy85-vb|wyse85-vb|wyse 85 with visible bell,
8630 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
8632 # Wyse 85 in 132-column mode.
8633 wy85-w|wyse85-w|wyse 85 in 132-column mode,
8635 rs2=\E[35h\E[?3h$<70>, use=wy85,
8637 # Wyse 85 in 132-column mode with visual bell.
8638 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
8641 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
8642 # This copes with an apparent firmware bug in the wy85. He writes:
8643 # "What I did was change leave the terminal cursor keys set to Normal
8644 # (instead of application), and change \E[ to \233 for all the keys in
8645 # terminfo. At one point, I found some reference indicating that this
8646 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
8647 # me), but I can't find that and the server under my bookmark to "Wyse
8648 # Technical" isn't responding. So there's the question of wether the wy85
8649 # terminfo should reflect the manufactuer's intended behaviour of the terminal
8651 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
8652 am, hs, mc5i, mir, msgr, xenl, xon,
8653 cols#80, it#8, lines#24, wsl#80,
8654 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8655 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8656 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8657 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8658 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8659 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8660 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8661 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8662 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8663 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8664 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8665 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8666 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8667 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8668 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
8669 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
8670 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
8671 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
8672 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
8673 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
8674 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
8675 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
8676 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
8677 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8678 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8679 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8680 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8682 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
8683 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8684 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8685 tsl=\E[40h\E7\E[25;%i%p1%dH,
8687 # Wyse 185 emulating a vt320 7 bit mode.
8689 # This terminal always displays 25 lines. These lines may be used
8690 # as 24 data lines and a terminal status line (top or bottom) or
8691 # 25 data lines. The 48 and 50 line modes change the page size
8692 # and not the number of lines on the screen.
8694 # The Compose Character key can be used as a meta key if changed
8697 wy185|wyse185|wyse 185,
8698 am, hs, km, mc5i, mir, msgr, xenl, xon,
8699 cols#80, it#8, lines#24, wsl#80,
8700 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8701 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8702 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8703 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
8704 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8705 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8706 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
8707 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8708 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
8709 el=\E[K, el1=\E[1K, enacs=\E)0,
8710 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
8711 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
8712 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
8713 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
8714 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
8715 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8716 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
8717 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8718 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8719 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
8720 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8721 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
8722 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
8723 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8724 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
8725 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8726 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
8727 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
8728 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8729 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8730 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8731 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
8734 # Wyse 185 with 24 data lines and top status (terminal status)
8735 wy185-24|wyse185-24|wyse 185 with 24 data lines,
8737 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
8740 # Wyse 185 with visual bell.
8741 wy185-vb|wyse185-vb|wyse 185+flash,
8744 # Wyse 185 in 132-column mode.
8745 wy185-w|wyse185-w|wyse 185 in 132-column mode,
8747 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
8748 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
8750 # Wyse 185 in 132-column mode with visual bell.
8751 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
8754 # wy325 terminfo entries
8755 # Done by Joe H. Davis 3-9-92
8757 # lines 25 columns 80
8759 wy325|wyse325|Wyse epc,
8760 am, bw, hs, mc5i, mir,
8761 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8762 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8763 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8764 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8765 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8766 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8767 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8768 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8769 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8770 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8771 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8772 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8773 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8774 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8775 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
8776 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8777 mc0=\EP, mc4=^T, mc5=\Ed#,
8778 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8779 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8780 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8781 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
8782 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8784 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8785 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8786 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
8787 tsl=\EF, use=adm+sgr,
8790 # lines 24 columns 80 vb
8792 wy325-vb|wyse325-vb|wyse-325 with visual bell,
8796 # lines 24 columns 132
8798 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
8799 cols#132, lw#7, nlab#16, wsl#97,
8800 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8801 rs2=\E`;$<70>, use=wy325,
8803 # lines 25 columns 80
8805 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
8806 lh@, lines#25, lw@, nlab@,
8807 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8809 # lines 25 columns 132
8811 wy325-25w|wyse325-25w|wy325 132 columns,
8812 lh@, lines#25, lw@, nlab@,
8813 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8815 # lines 25 columns 132 vb
8817 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
8821 # lines 42 columns 80
8823 wy325-42|wyse325-42|wyse-325 42 lines,
8824 lh@, lines#42, lw@, nlab@,
8825 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8827 # lines 42 columns 132
8829 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
8830 lh@, lines#42, lw@, nlab@,
8831 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8833 # lines 42 columns 132 vb
8835 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
8838 # lines 43 columns 80
8840 wy325-43|wyse325-43|wyse-325 43 lines,
8841 lh@, lines#43, lw@, nlab@,
8844 # lines 43 columns 132
8846 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
8847 lh@, lines#43, lw@, nlab@,
8848 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8850 # lines 43 columns 132 vb
8852 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
8855 # Wyse 370 -- 24 line screen with status line.
8857 # The terminal may have to be set for 8 data bits and 2 stop
8858 # bits for the arrow keys to work.
8860 # If you change keyboards the terminal will send different
8862 # The following definition is for the basic terminal without
8865 # <u0> -> enter Tektronix 4010/4014 mode
8866 # <u1> -> exit Tektronix 4010/4014 mode
8867 # <u2> -> enter ASCII mode (from any ANSI mode)
8868 # <u3> -> exit ASCII mode (goto native ANSI mode)
8869 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
8870 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
8872 # Bug: The <op> capability resets attributes.
8873 wy370-nk|wyse 370 without function keys,
8874 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
8875 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
8876 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8877 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8878 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8879 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8880 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8881 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8882 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
8883 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8884 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
8885 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
8886 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
8887 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
8888 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8890 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
8891 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
8892 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
8893 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
8895 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
8896 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
8897 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
8898 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8899 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
8900 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
8901 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8902 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8903 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8904 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
8905 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
8906 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
8908 # Function key set for the ASCII (wy-50 compatible) keyboard
8909 # This is the default 370.
8911 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
8912 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8913 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
8914 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8915 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
8916 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
8917 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
8918 knp=\E[U, kpp=\E[V, use=wy370-nk,
8920 # Function key set for the VT-320 (and wy85) compatible keyboard
8922 wy370-105k|Wyse 370 with 105 key keyboard,
8923 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8924 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8925 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8926 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
8927 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8928 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
8929 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
8930 use=wy370-nk, use=vt220+keypad,
8932 # Function key set for the PC compatible keyboard
8934 wy370-EPC|Wyse 370 with 102 key keyboard,
8935 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8936 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
8937 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
8938 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8939 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
8941 # Wyse 370 with visual bell.
8942 wy370-vb|Wyse 370 with visible bell,
8945 # Wyse 370 in 132-column mode.
8946 wy370-w|Wyse 370 in 132-column mode,
8948 rs2=\E[35h\E[?3h$<70>, use=wy370,
8950 # Wyse 370 in 132-column mode with visual bell.
8951 wy370-wvb|Wyse 370 with visible bell 132-columns,
8952 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
8953 wy370-rv|Wyse 370 reverse video,
8954 rs3=\E[32h\E[?5h, use=wy370,
8956 # Wyse 99gt Tektronix 4010/4014 emulator,
8958 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
8961 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
8962 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
8964 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
8966 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
8967 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
8969 # Wyse 160 Tektronix 4010/4014 emulator,
8971 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
8972 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
8973 home=^]8`g @\037, use=wy99gt-tek,
8975 # Wyse 370 Tektronix 4010/4014 emulator,
8977 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
8980 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
8981 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
8983 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
8985 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
8986 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
8987 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
8989 # Vendor-supplied Wyse entries end here.
8992 #TITLE: TERMINFO ENTRY WY520
8994 # The WY520 terminfo is based on the WY285 entry published on the WYSE
8995 # BBS with the addition of more function keys and special keys.
8997 # rs1 -> set personality
8998 # rs2 -> set number of columns
8999 # rs3 -> set number of lines
9000 # is1 -> select the proper font
9001 # is2 -> do the initialization
9002 # is3 -> If this string is empty then rs3 gets sent.
9004 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9005 # - The BS key is programmed to generate BS in smcup since
9006 # is2 doesn't seem to work.
9007 # - Remove and shift/Remove: delete a character
9008 # - Insert : enter insert mode
9009 # - Find : delete to end of file
9010 # - Select : clear a line
9011 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9013 # - Bottom status line (host writable line) is used.
9014 # - smkx,rmkx are removed because this would put the numeric
9015 # keypad in Dec application mode which doesn't seem to work
9016 # with SCO applications.
9018 wy520|wyse520|wyse 520,
9019 am, hs, km, mc5i, mir, xenl, xon,
9020 cols#80, it#8, lines#24, wsl#80,
9021 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9022 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9023 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9024 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9025 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9026 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9027 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9028 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9029 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9030 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9031 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9032 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9033 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9034 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9035 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9036 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9037 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9038 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9039 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9040 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9041 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9042 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9043 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9044 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9045 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9046 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9047 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9048 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9049 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9050 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9051 vpa=\E[%i%p1%dd, use=vt220+keypad,
9053 # Wyse 520 with 24 data lines and status (terminal status)
9054 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9056 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9059 # Wyse 520 with visual bell.
9060 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9061 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9063 # Wyse 520 in 132-column mode.
9064 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9066 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9067 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9069 # Wyse 520 in 132-column mode with visual bell.
9070 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9071 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9074 # Wyse 520 emulating a vt420 7 bit mode.
9075 # The DEL key is programmed to generate BS in is2.
9076 # With EPC keyboard.
9077 # - 'End' key will clear till end of line on EPC keyboard
9078 # - Shift/End : ignored.
9079 # - Insert : enter insert mode.
9080 # - Delete : delete a character (have to change interrupt character
9081 # to CTRL-C: stty intr '^c') for it to work since the
9082 # Delete key sends 7FH.
9083 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9084 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9085 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9088 # Wyse 520 with 24 data lines and status (terminal status)
9089 # with EPC keyboard.
9090 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9092 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9095 # Wyse 520 with visual bell.
9096 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9097 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9099 # Wyse 520 in 132-column mode.
9100 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9102 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9103 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9105 # Wyse 520 in 132-column mode with visual bell.
9106 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9107 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9109 # Wyse 520 in 80-column, 36 lines
9110 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9113 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9116 # Wyse 520 in 80-column, 48 lines
9117 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9120 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9123 # Wyse 520 in 132-column, 36 lines
9124 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9127 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9130 # Wyse 520 in 132-column, 48 lines
9131 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9134 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9138 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9139 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9142 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9145 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9146 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9149 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9152 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9153 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9156 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9159 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9160 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9163 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9166 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9167 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9168 # file and we don't know what <hts> is -- esr)
9169 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9171 cols#80, it#8, lines#24,
9172 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9173 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9174 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9175 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9176 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9177 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9180 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9181 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9182 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9183 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9186 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9187 wy100q|Wyse 100 for Quotron,
9189 cols#80, lines#24, xmc#1,
9190 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9191 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9192 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9193 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9194 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9196 #### Kermit terminal emulations
9198 # Obsolete Kermit versions may be listed in the section describing obsolete
9199 # non-ANSI terminal emulators later in the file.
9202 # KERMIT standard all versions.
9203 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9204 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9205 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9206 kermit|standard kermit,
9209 clear=\EE, cub1=^H, cuf1=\EC,
9210 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9211 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9212 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9213 kermit-am|standard kermit plus auto-margin,
9215 is2=K1 Standard Kermit plus Automatic Margins\n,
9218 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9219 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9221 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9222 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9225 clear=\EH\EJ, ed@, el@,
9226 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9228 # Cannot use line 25, now acts funny like ansi special scrolling region.
9229 # Initialization must escape from that region by cursor position to line 24.
9230 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9231 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9232 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9233 pckermit120|UCB IBMPC Kermit 1.20,
9235 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9237 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9238 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9239 # MS-DOS Kermit 2.27 for the IBMPC
9240 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9241 # Cannot use line 25, now acts funny like ansi special scrolling region.
9242 # Initialization must escape from that region by cursor position to line 24.
9243 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9244 # Reverse video for standout like H19.
9245 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9246 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9247 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9249 cols#80, it#8, lines#24,
9250 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9251 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9252 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9253 home=\EH, ht=^I, il1=\EL,
9254 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9255 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9256 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9257 # MS-DOS Kermit 2.27 with automatic margins
9258 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9259 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9261 cvvis=\EO\Eq\EG\EvK5,
9262 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9264 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9265 # Automatic margins now default. Use ansi <sgr> for highlights.
9266 # Define function keys.
9267 # (msk22714: removed obsolete ":kn#10:" -- esr)
9268 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9269 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9271 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9272 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9273 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9274 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9275 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9276 # This was designed for a VT320 emulator, but it is probably a good start
9277 # at support for the VT320 itself.
9278 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9279 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9280 vt320-k3|MS-Kermit 3.00's vt320 emulation,
9281 am, eslok, hs, km, mir, msgr, xenl,
9282 cols#80, it#8, lines#49, pb#9600, vt#3,
9283 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9284 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9285 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9286 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9287 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9288 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9289 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9290 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9291 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9292 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9293 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9294 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9295 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9296 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9297 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9298 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9299 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9300 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9301 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9302 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9303 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9304 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9305 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9306 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
9307 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9308 vt320-k311|dec vt320 series as defined by kermit 3.11,
9309 am, eslok, hs, mir, msgr, xenl, xon,
9310 cols#80, it#8, lines#24, vt#3,
9311 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9312 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9313 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9314 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9315 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9316 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9317 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9318 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
9319 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
9320 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
9321 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
9322 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9323 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9324 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
9325 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
9326 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
9327 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
9328 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
9329 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
9330 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
9332 ######## NON-ANSI TERMINAL EMULATIONS
9337 # These entries attempt to describe Avatar, a terminal emulation used with
9338 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
9339 # capabilities, but with cheaper (shorter) control sequences. Messy design,
9340 # excessively dependent on PC idiosyncracies, but apparently rather popular
9343 # No color support. Avatar doesn't fit either of the Tektronix or HP color
9344 # models that terminfo knows about. An Avatar color attribute is the
9345 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
9347 # I wrote these entries while looking at the Avatar spec. I don't have
9348 # the facilities to test them. Let me know if they work, or don't.
9350 # Avatar escapes not used by these entries (because maybe you're smarter
9351 # and more motivated than I am and can figure out how to wrap terminfo
9352 # around some of them, and because they are weird enough to be funny):
9354 # ^L -- clear window/reset current attribute to default
9355 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
9357 # bit: 6 5 4 3 2 1 0
9359 # +---+---+ | +---+---+
9361 # | | foreground color
9362 # | foreground intensity
9365 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
9366 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
9367 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
9368 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
9369 # (^V^L and ^V^M set the current attribute as a side-effect.)
9370 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
9371 # in the pattern, <c> the number of times the pattern
9372 # should be repeated. If either value is 0, no-op.
9373 # The pattern can contain Avatar console codes,
9374 # including other ^V ^Y patterns.
9376 # ^V^O -- clockwise mode on; turn print direction right each time you
9377 # hit a window edge (yes, really). Turned off by CR
9379 # ^V^Q%c -- query the driver
9380 # ^V^R -- driver reset
9381 # ^V^S -- Sound tone (PC-specific)
9382 # ^V^T -- change highlight at current cursor poition to %c
9383 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
9384 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
9387 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9388 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
9389 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
9390 # which is the only method that will actually work for multiple highlights.)
9392 # Update by TD - 2004: half of this was inconsistent. Found documentation
9393 # and repaired most of the damage. sgr0 is probably incorrect, but the
9394 # available documentation gives no clues for a workable string.
9395 avatar0|avatar terminal emulator level 0,
9397 cols#80, it#8, lines#25,
9398 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
9399 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
9400 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
9402 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
9403 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
9405 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9406 avatar0+|avatar terminal emulator level 0+,
9407 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
9408 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9409 avatar|avatar1|avatar terminal emulator level 1,
9410 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
9411 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
9415 # RBComm is a lean and mean terminal emulator written by the Interrupt List
9416 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
9417 # '90s), especially in the BBS world, and still has some loyal users due to
9418 # its very small memory footprint and to a cute macro language.
9419 rbcomm|IBM PC with RBcomm and EMACS keybindings,
9420 am, bw, mir, msgr, xenl,
9421 cols#80, it#8, lines#25,
9422 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9423 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9424 cub1=^H, cud1=^C, cuf1=^B,
9425 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
9426 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
9427 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
9428 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
9429 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
9430 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
9431 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
9432 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
9433 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
9434 rbcomm-nam|IBM PC with RBcomm without autowrap,
9436 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9437 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
9438 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9439 rbcomm-w|IBM PC with RBcomm in 132 column mode,
9441 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9442 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
9443 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9445 ######## LCD DISPLAYS
9449 # from: Eric Z. Ayers (eric@ale.org)
9451 # Matrix Orbital 20x4 LCD display
9452 # Command Character is 0xFE (decimal 254, octal 376)
9454 # On this device, cursor addressability isn't possible. The LCD expects:
9455 # 0xfe G <col> <row>
9456 # for cup: %p1 == row and %p2 is column
9459 # cup=\376G%p2%c%p1%c
9460 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
9461 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
9463 # Alas, there is no cursor upline capability on this display.
9465 # These entries add some 'sanity stuff' to the clear function. That is, it
9466 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
9467 # and turns off the cursor blinking and stuff like that.
9469 # NOTE: calling 'beep' turns on the backlight (bell)
9470 # NOTE: calling 'flash' turns it on and back off (visual bell)
9472 MtxOrb|Generic Matrix Orbital LCD display,
9473 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
9474 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
9475 flash=\376B\001$<200>\376F, home=\376H,
9476 MtxOrb204|20x4 Matrix Orbital LCD display,
9477 cols#20, lines#4, use=MtxOrb,
9478 MtxOrb162|16x2 Matrix Orbital LCD display,
9479 cols#16, lines#2, use=MtxOrb,
9482 ######## OLDER TERMINAL TYPES
9484 # This section is devoted to older commercial terminal brands that are now
9485 # discontinued, but known to be still in use or represented by emulations.
9488 #### AT&T (att, tty)
9490 # This section also includes Teletype-branded VDTs.
9492 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
9493 # Boundless Technologies); for details, see the header comment on the ADDS
9496 # These are AT&T's official terminfo entries. All-caps aliases have been
9499 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
9500 am, eo, mir, msgr, xon,
9501 cols#80, it#8, lines#24,
9502 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
9503 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9504 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9505 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
9506 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
9507 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9508 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9509 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
9510 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
9511 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
9512 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
9513 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9514 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
9516 att2350|AT&T 2350 Video Information Terminal 80 column mode,
9517 mc0@, mc4@, mc5@, use=att2300,
9519 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
9520 # Seems upward compatible with vt100, plus ins/del line/char.
9521 # On sgr, the protection parameter is ignored.
9522 # No check is made to make sure that only 3 parameters are output.
9523 # standout= reverse + half-intensity = 3 | 5.
9524 # bold= reverse + underline = 2 | 3.
9525 # note that half-bright blinking doesn't look different from normal blinking.
9526 # NOTE:you must program the function keys first, label second!
9527 # (att4410: a BSD entry has been seen with the following capabilities:
9528 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
9529 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
9530 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
9531 am, hs, mir, msgr, xon,
9532 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
9533 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9534 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
9535 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
9536 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
9537 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
9538 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
9539 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
9540 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9541 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
9542 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
9543 ll=\E[24H, nel=^M^J,
9544 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
9545 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9546 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9548 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9549 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9550 tsl=\E7\E[25;%p1%{1}%+%dH,
9552 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
9554 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
9556 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
9558 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
9561 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
9563 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
9565 # 5410 in terms of a vt100
9566 # (v5410: added <rmam>/<smam> based on init string -- esr)
9567 v5410|att5410 in terms of a vt100,
9569 cols#80, it#8, lines#24, vt#3,
9570 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9571 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9572 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9573 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
9574 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
9575 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
9576 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
9577 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9578 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
9579 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
9580 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9582 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
9583 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
9584 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9588 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
9589 # even! the 5420 has three modes: scroll, window or page mode
9590 # this terminfo should work in scroll or window mode, but doesn't
9591 # take advantage of any of the differences between them.
9593 # Has memory below (2 lines!)
9594 # 3 pages of memory (plus some spare)
9595 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
9596 # <hpa>, <hts> would work for these, but these work in both scroll and window
9597 # mode... Unset insert character so insert mode works
9598 # <is1> sets 80 column mode,
9599 # <is2> escape sequence:
9600 # 1) turn off all fonts
9601 # 2) function keys off, keyboard lock off, control display off,
9602 # insert mode off, erasure mode off,
9603 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
9604 # 4) reset origin mode
9605 # 5) set line wraparound
9606 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
9608 # 8) program ENTER to transmit ^J,
9609 # We use \212 to program the ^J because a bare ^J will get translated by
9610 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
9612 # <is3> set screen color to black,
9613 # No representation in terminfo for the delete word key: kdw1=\Ed
9614 # Key capabilities assume the power-up send sequence...
9615 # This <rmcup> is not strictly necessary, but it helps maximize
9616 # memory usefulness: <rmcup=\Ez>,
9617 # Alternate sgr0: <sgr0=\E[m\EW^O>,
9618 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
9619 # smkx programs the SYS PF keys to send a set sequence.
9620 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
9621 # This string causes them to send the strings <kf1>-<kf8>
9622 # when pressed in SYS PF mode.
9623 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
9624 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
9626 lh#2, lm#78, lw#8, nlab#8, wsl#55,
9627 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
9628 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
9629 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
9630 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
9631 flash=\E[?5h$<200>\E[?5l, home=\E[x,
9632 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
9633 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
9634 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
9635 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
9636 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
9637 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
9638 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9639 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9640 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
9641 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
9642 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
9643 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
9644 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
9645 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
9646 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9647 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
9648 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
9649 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9652 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
9653 cols#132, lm#54, wsl#97,
9654 is1=\E[?3h$<100>, use=att4415,
9656 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
9657 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
9659 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
9660 cols#132, lm#54, wsl#97,
9661 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
9664 # Note that this mode permits programming USER PF KEYS and labels
9665 # However, when you program user pf labels you have to reselect
9666 # user pf keys to make them appear!
9667 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
9668 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
9669 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
9670 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
9672 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
9673 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9676 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
9677 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9680 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
9681 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9684 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
9685 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9688 att5420_2|AT&T 5420 model 2 80 cols,
9689 am, db, hs, mir, msgr, xon,
9690 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9691 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9692 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
9693 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9694 cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
9695 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
9696 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
9697 dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
9698 el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9699 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9700 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9702 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9703 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
9704 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
9705 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
9706 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
9707 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9708 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9709 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
9710 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
9711 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
9712 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
9713 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
9714 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9716 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9717 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
9718 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9719 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9720 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
9722 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9725 att4418|att5418|AT&T 5418 80 cols,
9728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9729 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
9730 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9731 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9732 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
9733 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
9734 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
9735 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
9736 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
9737 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
9738 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
9739 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
9740 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
9741 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
9742 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9743 att4418-w|att5418-w|AT&T 5418 132 cols,
9745 is1=\E[?3h, use=att5418,
9747 att4420|tty4420|teletype 4420,
9748 OTbs, da, db, eo, msgr, ul, xon,
9749 cols#80, lines#24, lm#72,
9750 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
9751 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
9752 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
9753 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
9754 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
9755 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
9756 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
9757 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
9759 # The following is a terminfo entry for the Teletype 4424
9760 # asynchronous keyboard-display terminal. It supports
9761 # the vi editor. The terminal must be set up as follows,
9763 # HIGHLIGHT DEFINITION 3-TONE
9764 # DISPLAY FUNCTION GROUP III
9766 # The second entry below provides limited (a la adm3a)
9767 # operation under GROUP II.
9769 # This must be used with DISPLAY FUNCTION GROUP I or III
9770 # and HIGHLIGHT DEFINITION 3-TONE
9771 # The terminal has either bold or blink, depending on options
9773 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
9774 att4424|tty4424|teletype 4424,
9777 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9778 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
9779 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9780 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
9781 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
9782 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
9783 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
9784 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
9785 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9786 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9787 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
9789 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
9790 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
9793 att4424-1|tty4424-1|teletype 4424 in display function group I,
9794 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
9797 # This entry is not one of AT&T's official ones, it was translated from the
9798 # 4.4BSD termcap file. The highlight strings are different from att4424.
9799 # I have no idea why this is -- older firmware version, maybe?
9800 # The following two lines are the comment originally attached to the entry:
9801 # This entry appears to avoid the top line - I have no idea why.
9802 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
9803 att4424m|tty4424m|teletype 4424M,
9805 cols#80, it#8, lines#23,
9806 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
9807 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
9808 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
9809 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9810 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
9811 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
9812 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9814 # The Teletype 5425 is really version 2 of the Teletype 5420. It
9815 # is quite similar, except for some minor differences. No page
9816 # mode, for example, so all of the <cup> sequences used above have
9817 # to change back to what's being used for the 5410. Many of the
9818 # option settings have changed their numbering as well.
9820 # This has been tested on a preliminary model.
9822 # (att5425: added <rmam>/<smam> based on the init string -- esr)
9823 att5425|tty5425|att4425|AT&T 4425/5425,
9824 am, da, db, hs, mir, msgr, xenl, xon,
9825 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9826 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9827 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9828 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
9829 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9830 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9831 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9832 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9833 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
9834 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
9835 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9836 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9837 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9838 invis=\E[8m, is1=\E<\E[?3l$<100>,
9839 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
9840 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9841 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9842 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
9843 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
9844 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
9845 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
9847 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
9848 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
9849 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
9850 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
9851 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
9852 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9853 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9854 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
9855 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
9856 vpa=\E[%p1%{1}%+%dd,
9858 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
9859 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
9861 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
9862 cols#132, lm#54, wsl#97,
9863 is1=\E[?3h$<100>, use=tty5425,
9865 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
9866 # I also added <rmam>/<smam> -- esr)
9867 att4426|tty4426|teletype 4426S,
9869 cols#80, lines#24, lm#48,
9870 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9871 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
9872 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
9873 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9874 cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
9875 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
9876 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
9877 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
9878 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
9879 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9880 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
9881 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
9882 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
9883 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
9884 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
9885 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
9888 # Terminfo entry for the AT&T 510 A Personal Terminal
9889 # Function keys 9 - 16 are available only after the
9890 # screen labeled (soft keys/action blocks) are labeled. Function key
9891 # 9 corresponds to the leftmost touch target on the screen,
9892 # function key 16 corresponds to the rightmost.
9894 # This entry is based on one done by Ernie Rice at Summit, NJ and
9895 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
9896 att510a|bct510a|AT&T 510A Personal Terminal,
9897 am, mir, msgr, xenl, xon,
9898 cols#80, lh#2, lines#24, lw#7, nlab#8,
9899 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9900 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9901 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
9902 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
9903 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9904 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
9905 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
9906 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
9907 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
9908 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
9909 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
9910 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
9911 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
9912 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
9913 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
9914 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9915 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
9916 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
9917 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
9918 smul=\E[4m, tbc=\E[3g,
9920 # Terminfo entry for the AT&T 510 D Personal Terminal
9921 # Function keys 9 through 16 are accessed by bringing up the
9923 # Function key 9 corresponds to the leftmost touch target on the screen,
9924 # function key 16 corresponds to the rightmost.
9926 # There are problems with soft key labeling. These are due to
9927 # strangenesses in the native terminal that are impossible to
9928 # describe in a terminfo.
9929 att510d|bct510d|AT&T 510D Personal Terminal,
9930 am, da, db, mir, msgr, xenl, xon,
9931 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
9932 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9933 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9934 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
9935 cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
9936 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9937 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
9938 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
9939 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
9940 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9941 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
9942 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
9943 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9944 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
9945 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
9946 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
9947 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
9948 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
9949 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
9950 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
9951 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
9952 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
9953 rs2=\E[5;0|, sc=\E7,
9954 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9955 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
9956 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
9957 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
9959 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
9960 att500|att513|AT&T 513 using page mode,
9961 am, chts, mir, msgr, xenl, xon,
9962 cols#80, lh#2, lines#24, lw#8, nlab#8,
9963 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
9964 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9965 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
9966 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9967 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9968 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9969 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
9970 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
9971 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
9972 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9973 indn=\E[%p1%dE, invis=\E[8m,
9974 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
9975 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
9976 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
9977 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
9978 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
9979 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
9980 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
9981 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
9982 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9983 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
9984 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
9985 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
9986 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
9987 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
9988 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
9989 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
9990 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
9991 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
9993 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
9994 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
9995 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
9996 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
9997 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
9998 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
9999 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10001 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10002 rs2=\E[5;0|, sc=\E7,
10003 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10004 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10005 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10006 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10009 # printer must be set to EMUL ANSI to accept ESC codes
10010 # <cuu1> stops at top margin
10011 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10012 # and alt font ascii,wrap on,tabs cleared
10013 # <is2> disables newline on LF,Emphasized off
10014 # The <u0> capability sets form length
10015 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10017 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10018 orhi#100, orl#12, orvi#72,
10019 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10021 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10022 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10023 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10024 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10026 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10027 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10028 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10029 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10031 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10032 # The following SET-UP modes are assumed for normal operation:
10033 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10034 # Other SET-UP modes may be set for operator convenience or communication
10035 # requirements. This termcap description is for the Resident Terminal Mode.
10036 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10037 # The BRL entry also said: UNSAFE :ll=\E[70H:
10038 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10040 cols#88, it#8, lines#70, vt#3,
10041 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10042 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10043 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10044 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10045 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10046 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10047 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10050 # 5620 terminfo (2.0 or later ROMS with char attributes)
10051 # The following SET-UP modes are assumed for normal operation:
10052 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10053 # Other SET-UP modes may be set for operator convenience or communication
10054 # requirements. This termcap description is for Resident Terminal Mode. No
10055 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10056 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10057 # Be aware that older versions of the dmd have a firmware bug that affects
10058 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10059 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10060 # also has <ll>=\E[70H commented out and marked unsafe.
10061 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10062 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10063 OTbs, am, msgr, npc, xon,
10064 cols#88, it#8, lines#70,
10065 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10066 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10067 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10068 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10069 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10070 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10071 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10072 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10073 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10074 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10075 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10076 lines#24, use=att5620,
10077 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10078 lines#34, use=att5620,
10079 # 5620 layer running the "S" system's downloaded graphics handler:
10080 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10082 cols#80, it#8, lines#72,
10083 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10084 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10085 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10086 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10089 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10091 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10092 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10093 att605|AT&T 605 80 column 102key keyboard,
10095 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10096 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10097 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10098 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10099 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10100 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10101 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10102 il1=\E[L, ind=^J, invis=\E[8m,
10103 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10104 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10105 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10106 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10107 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10108 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10109 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10110 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10111 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10112 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10113 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10114 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10115 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10116 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10117 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10118 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10119 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10120 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10121 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10122 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10123 tsl=\E7\E[25;%i%p1%dx,
10124 att605-pc|ATT 605 in pc term mode,
10125 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10126 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10127 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10128 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10129 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10130 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10131 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10132 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10133 xonc=e, use=att605,
10134 att605-w|AT&T 605-w 132 column 102 key keyboard,
10136 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10138 # (att610: I added <rmam>/<smam> based on the init string. I also
10139 # added <indn> and <rin> because the BSD file says the att615s have them,
10140 # and the 615 is like a 610 with a big keyboard, and most of their other
10141 # smart terminals support the same sequence -- esr)
10142 att610|AT&T 610; 80 column; 98key keyboard,
10143 am, eslok, hs, mir, msgr, xenl, xon,
10144 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10145 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10146 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10147 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10148 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10149 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10150 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10151 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10152 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10153 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10154 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10155 indn=\E[%p1%dS, invis=\E[8m,
10156 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10157 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10158 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10159 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10160 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10161 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10162 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10164 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10165 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10166 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10167 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10168 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10169 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10170 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10171 att610-w|AT&T 610; 132 column; 98key keyboard,
10173 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10176 att610-103k|AT&T 610; 80 column; 103key keyboard,
10177 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10178 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10179 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10180 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10181 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10182 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10183 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10184 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10185 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10186 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10187 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10188 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10189 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10190 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10192 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10194 att615|AT&T 615; 80 column; 98key keyboard,
10195 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10196 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10197 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10198 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10199 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10200 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10201 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10202 att615-w|AT&T 615; 132 column; 98key keyboard,
10203 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10204 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10205 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10206 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10207 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10208 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10209 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10210 att615-103k|AT&T 615; 80 column; 103key keyboard,
10211 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10212 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10213 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10214 # (att620: I added <rmam>/<smam> based on the init string and
10215 # <rin>/<indn> from a BSD termcap -- esr)
10216 att620|AT&T 620; 80 column; 98key keyboard,
10217 am, eslok, hs, mir, msgr, xenl, xon,
10218 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10219 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10220 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10221 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10222 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10223 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10224 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10225 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10226 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10227 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10228 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10229 indn=\E[%p1%dS, invis=\E[8m,
10230 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10231 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10232 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10233 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10234 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10235 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10236 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10237 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10238 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10239 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10240 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10241 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10242 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10243 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10244 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10245 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10246 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10247 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10248 rs2=\Ec\E[?3l, sc=\E7,
10249 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10250 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10251 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10252 tsl=\E7\E[25;%i%p1%dx,
10253 att620-w|AT&T 620; 132 column; 98key keyboard,
10255 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10257 att620-103k|AT&T 620; 80 column; 103key keyboard,
10258 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10259 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10260 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10261 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10262 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10263 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10264 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10265 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10266 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10267 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10268 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10269 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10270 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10271 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10272 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10273 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10275 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10277 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10280 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10281 # The following SETUP modes are assumed for normal operation:
10282 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10283 # Font_Size=Large Non-Layers_Window_Cols=80
10284 # Non-Layers_Window_Rows=60
10285 # Other SETUP modes may be set for operator convenience or communication
10286 # requirements. Some capabilities assume a printer attached to the Aux EIA
10287 # port. This termcap description is for the Fixed Non-Layers Window. No
10288 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10289 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10290 att630|AT&T 630 windowing terminal,
10291 OTbs, am, da, db, mir, msgr, npc, xon,
10292 cols#80, it#8, lines#60, lm#0,
10293 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10294 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10295 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10296 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10297 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10298 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10299 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10300 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10301 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10302 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10303 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10304 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10305 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10306 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10307 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10308 rmul=\E[m, rs2=\Ec, sc=\E7,
10309 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10310 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10311 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10312 lines#24, use=att630,
10314 # This is the att700 entry for 700 native emulation of the AT&T 700
10315 # terminal. Comments are relative to changes from the 605V2 entry and
10316 # att730 on which the entry is based. Comments show the terminfo
10317 # capability name, termcap name, and description.
10319 # Here is what's going onm in the init string:
10320 # ESC [ 50;4| set 700 native mode (really is 605)
10321 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
10322 # ESC [ 53;0| set GenFlow to Xon/Xoff
10323 # ESC [ 8 ;0| set CR on NL
10324 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
10325 # ESC [ ? 4 l jump scroll
10326 # ESC [ ? 5 l/h video: normal (l); reverse (h)
10327 # ESC [ ?13 l Labels on
10328 # ESC [ ?15 l parity check = no
10329 # ESC [ 13 l monitor mode off
10330 # ESC [ 20 l LF on NL (not CRLF on NL)
10331 # ESC [ ? 7 h autowrap on
10332 # ESC [ 12 h local echo off
10333 # ESC ( B GO = ASCII
10334 # ESC ) 0 G1 = Special Char & Line Drawing
10335 # ESC [ ? 31 l Set 7 bit controls
10337 # Note: Most terminals, especially the 600 family use Reverse Video for
10338 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
10339 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
10340 # standout mode with \E[m (all normal attributes). The 730 entry simply
10341 # exits reverse video which would leave other current attributes intact. It
10342 # was assumed the 730 entry to be more correct so rmso has changed. The
10343 # 605V2 has no sequences to turn individual attributes off, thus its setting
10344 # and the rmso/smso settings from the 730.
10346 # Note: For the same reason as above in rmso I changed exit under-score mode
10347 # to specifically turn off underscore, rather than return to all normal
10350 # Note: The following pkey_xmit is taken from the 605V2 which contained the
10351 # capability as pfxl. It was changed here to pfx since pfxl
10352 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
10353 # allows strings to be parameters and label values must be programmed as
10354 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
10355 # and strings to be parameters. The 605V2 pfx entry should be examined later
10356 # in this regard. For reference the 730 pfxl entry is shown here for comparison
10358 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
10359 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
10362 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10365 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10367 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
10371 # modular 10 pin Connector
10372 # Left side Right side
10373 # Pin 1 2 3 4 5 6 7 8 9 10
10375 # Key (notch) at bottom
10387 # The manual is 189 pages and is loaded with details about the escape codes,
10388 # etc..... Available from AT&T CIC 800-432-6600...
10389 # ask for Document number 999-300-660..
10391 att700|AT&T 700 24x80 column display w/102key keyboard,
10392 am, eslok, hs, mir, msgr, xenl, xon,
10393 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10394 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10395 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10396 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10397 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10398 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10399 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10400 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10401 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10402 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
10403 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10404 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
10405 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
10406 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
10407 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10408 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
10409 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
10410 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
10411 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
10412 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
10413 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
10414 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
10415 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10416 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
10417 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10418 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
10419 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10420 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10421 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10422 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10423 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
10424 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
10425 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10426 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
10427 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
10428 tsl=\E7\E[99;%i%p1%dx,
10430 # This entry was modified 3/13/90 by JWE.
10431 # fixes include additions of <enacs>, correcting <rep>, and modification
10432 # of <kHOM>. (See comments below)
10433 # att730 has status line of 80 chars
10434 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
10435 # the <kf25> and up keys are used for shifted system Fkeys
10436 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
10437 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
10438 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
10439 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
10440 # 102, 102+1, or 122 key keyboards
10442 # (att730: I added <rmam>/<smam> based on the init string -- esr)
10443 att730|AT&T 730 windowing terminal,
10444 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
10445 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
10446 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10447 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10448 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10449 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10450 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10451 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10452 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10453 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10454 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10455 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
10456 ind=\ED, invis=\E[8m,
10457 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
10458 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10459 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10460 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10461 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
10462 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
10463 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
10464 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
10465 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
10466 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
10467 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
10468 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
10469 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10470 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
10471 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10472 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
10473 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
10474 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10475 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10476 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
10477 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
10478 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10479 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10480 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
10481 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
10482 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
10483 lines#41, use=att730,
10484 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
10485 lines#24, use=att730,
10486 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
10487 flash=\E[?5l$<200>\E[?5h,
10488 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
10490 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
10491 lines#41, use=att730r,
10492 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
10493 lines#24, use=att730r,
10495 # The following represents the screen layout along with the associated
10496 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
10497 # not appear on the screen but are shown to reference the bezel buttons.
10498 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
10499 # position relative to the screen.
10503 # +----------------------------------------------------------------+
10505 # XXXX | kf0 kf24 | XXXX
10508 # XXXX | kf1 kf23 | XXXX
10511 # XXXX | kf2 kf22 | XXXX
10514 # XXXX | kf3 kf21 | XXXX
10517 # XXXX | kf4 kf20 | XXXX
10520 # XXXX | kf5 kf19 | XXXX
10523 # XXXX | kf6 kf18 | XXXX
10529 # +----------------------------------------------------------------+
10531 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
10533 # Note: XXXX represents the screen buttons
10539 # The character string sent by key 'kf26' may be user programmable
10540 # to send either \E[16s, or \E[26s.
10541 # The character string sent by key 'krfr' may be user programmable
10542 # to send either \E[17s, or \E[27s.
10544 # Depression of the "CMD" key sends \E! (kcmd)
10545 # Depression of the "MAIL" key sends \E[26s (kf26)
10546 # "REDRAW" same as "REFRESH" (krfr)
10548 # "kf" functions adds carriage return to output string if terminal is in
10551 # The following are functions not covered in the table above:
10553 # Set keyboard character (SKC): \EPn1;Pn2w
10554 # Pn1= 0 Back Space key
10556 # Pn2= Program char (hex)
10558 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
10559 # Pn1= Window number (1-39)
10560 # Pn2-Pn5= Y;X;Y;X coordinates
10562 # Screen Selection (SSL): \E[Pnu
10563 # Pn= Window number
10565 # Set Terminal Modes (SM): \E[Pnh
10566 # Pn= 3 Graphics mode
10567 # Pn= > Cursor blink
10568 # Pn= < Enter new line mode
10569 # Pn= = Enter reverse insert/replace mode
10570 # Pn= ? Enter no scroll mode
10572 # Reset Terminal Mode (RM): \E[Pnl
10573 # Pn= 3 Exit graphics mode
10574 # Pn= > Exit cursor blink
10575 # Pn= < Exit new line mode
10576 # Pn= = Exit reverse insert/replace mode
10577 # Pn= ? Exit no scroll mode
10579 # Screen Status Report (SSR): \E[Pnp
10580 # Pn= 0 Request current window number
10581 # Pn= 1 Request current window dimensions
10583 # Device Status Report (DSR): \E[6n Request cursor position
10585 # Call Status Report (CSR): \E[Pnv
10586 # Pn= 0 Call failed
10587 # Pn= 1 Call successful
10589 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
10590 # Pn1= Button number to be loaded
10591 # Pn2= Character count of "string"
10592 # Pn3= Key mode being loaded:
10596 # String= Text string (15 chars max)
10598 # Screen Number Report (SNR): \E[Pnp
10599 # Pn= Screen number
10601 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
10602 # Pn1= Number of rows available in window
10603 # Pn2= Number of columns available in window
10605 # Cursor Position Report (CPR): \E[Pn1;Pn2R
10606 # Pn1= "Y" Position of cursor
10607 # Pn2= "X" Position of cursor
10609 # Request Answer Back (RAB): \E[c
10611 # Answer Back Response (ABR): \E[?;*;30;VSV
10612 # *= 0 No printer available
10613 # *= 2 Printer available
10614 # V= Software version number
10615 # SV= Software sub version number
10616 # (printer-available field not documented in v1)
10618 # Screen Alignment Aid: \En
10620 # Bell (lower pitch): \E[x
10622 # Dial Phone Number: \EPdstring\
10623 # string= Phone number to be dialed
10625 # Set Phone Labels: \EPpstring\
10626 # string= Label for phone buttons
10628 # Set Clock: \EPchour;minute;second\
10630 # Position Clock: \EPsY;X\
10631 # Y= "Y" coordinate
10632 # X= "X" coordinate
10634 # Delete Clock: \Epr\
10636 # Programming The Function Buttons: \EPfPn;string\
10637 # Pn= Button number (00-06, 18-24)
10638 # (kf00-kf06, kf18-kf24)
10639 # string= Text to sent on button depression
10641 # The following in version 2 only:
10643 # Request For Local Directory Data: \EPp12;\
10645 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
10647 # Request for Local Directory Data in print format: \EPp13;\
10649 # Enable 'Prt on Line' mode: \022 (DC2)
10651 # Disable 'Prt on Line' mode: \024 (DC4)
10655 # The following Terminfo entry describes functions which are supported by
10656 # the AT&T 5430/pt505 terminal software version 2 and later.
10657 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
10659 cols#80, it#8, lines#24,
10660 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10661 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
10662 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
10663 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10664 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10665 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10666 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
10667 il=\E[%p1%dL, il1=\E[L, ind=^J,
10668 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
10669 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10670 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
10671 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
10672 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
10673 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
10674 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10675 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
10676 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
10677 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
10679 # The following Terminfo entry describes functions which are supported by
10680 # the AT&T 5430/pt505 terminal software version 1.
10681 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
10683 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
10684 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
10685 lines#22, use=att505,
10687 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
10688 # This cut mark helps make life less painful for people running ncurses tic
10689 # on machines with relatively little RAM. The file can be broken in half here
10690 # cleanly and compiled in sections -- no `use' references cross this cut
10694 #### Ampex (Dialogue)
10696 # Yes, these are the same people who are better-known for making audio- and
10697 # videotape. I'm told they are located in Redwood City, CA.
10700 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
10701 # (ampex80: some capabilities merged in from SCO's entry -- esr)
10702 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
10704 cols#80, it#8, lines#24,
10705 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
10706 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10707 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
10708 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
10709 smso=\Ej, smul=\El, tbc=\E3,
10710 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
10711 ampex175|ampex d175,
10714 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10715 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10716 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
10717 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
10718 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
10719 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
10720 # No backspace key in the main QWERTY cluster. Fortunately, it has a
10721 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
10722 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
10723 # mode), this key can be used as the erase key; I find I like this. Because
10724 # some people and some systems may not, there is another termcap ("ampex175")
10725 # that suppresses this little eccentricity by omitting the relevant capability.
10726 ampex175-b|ampex d175 using left arrow for erase,
10727 kbs=^_, use=ampex175,
10728 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
10729 # (ampex210: removed obsolete ":kn#10:" -- esr)
10730 ampex210|a210|ampex a210,
10731 OTbs, am, hs, xenl,
10732 cols#80, it#8, lines#24, xmc#1,
10733 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
10734 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10735 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
10736 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
10737 if=/usr/share/tabset/std, il1=\EE, invis@,
10738 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
10739 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10740 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10741 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
10742 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
10743 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
10744 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
10745 # and moved the padding to be *after* the caps -- esr)
10746 ampex219|ampex-219|amp219|Ampex with Automargins,
10748 cols#80, it#8, lines#24,
10749 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
10750 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
10751 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
10752 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
10753 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
10754 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
10755 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10756 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
10757 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
10758 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
10759 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
10760 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
10761 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
10762 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
10763 cols#132, lines#24,
10764 bel=^G, cr=^M, cud1=^J, ind=^J,
10765 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
10766 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
10767 ampex232|ampex-232|Ampex Model 232,
10769 cols#80, lines#24, xmc#1,
10770 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
10771 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10772 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
10773 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
10774 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
10775 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
10776 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
10777 kf9=^AI\r, khome=^^, use=adm+sgr,
10778 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
10779 ampex232w|Ampex Model 232 / 132 columns,
10780 cols#132, lines#24,
10781 is2=\E\034Eg\El, use=ampex232,
10783 #### Ann Arbor (aa)
10785 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
10786 # numbers of function keys. At least some used monitors in portrait mode,
10787 # allowing up to 76-character screen heights! They were reachable at:
10789 # Ann Arbor Terminals
10790 # 6175 Jackson Road
10791 # Ann Arbor, MI 48103
10794 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
10795 # can't be found on the Web; I fear they're long dead. R.I.P.
10799 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
10800 # Highly modified 6/22 by Mike O'Brien.
10801 # split out into several for the various screen sizes by dave-yost@rand
10802 # Modifications made 3/82 by Mark Horton
10803 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
10804 # status line moved to top of screen, <flash> removed 5/82
10805 # Some unknown person at SCO then hacked the init strings to make them more
10808 # assumes the following setup:
10809 # A menu: 0000 1010 0001 0000
10810 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10811 # C menu: 56 66 0 0 9600 0110 1100
10812 # D menu: 0110 1001 1 0
10814 # Briefly, the settings are for the following modes:
10815 # (values are for bit set/clear with * indicating our preference
10816 # and the value used to test these termcaps)
10817 # Note that many of these settings are irrelevent to the terminfo
10818 # and are just set to the default mode of the terminal as shipped
10821 # A menu: 0000 1010 0001 0000
10822 # Block/underline cursor*
10823 # blinking/nonblinking cursor*
10824 # key click/no key click*
10825 # bell/no bell at column 72*
10827 # key pad is cursor control*/key pad is numeric
10828 # return and line feed/return for <cr> key *
10829 # repeat after .5 sec*/no repeat
10830 # repeat at 25/15 chars per sec. *
10832 # hold data until pause pressed/process data unless pause pressed*
10833 # slow scroll/no slow scroll*
10834 # Hold in area/don't hold in area*
10835 # functions keys have default*/function keys disabled on powerup
10837 # show/don't show position of cursor during page transmit*
10842 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10843 # Baud rate (9600*)
10845 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
10846 # 1 stop bit*/2 stop bits
10847 # parity error detection off*/on
10849 # keyboard local/on line*
10850 # half/full duplex*
10851 # disable/do not disable keyboard after data transmission*
10853 # transmit entire page/stop transmission at cursor*
10854 # transfer/do not transfer protected characters*
10855 # transmit all characters/transmit only selected characters*
10856 # transmit all selected areas/transmit only 1 selected area*
10858 # transmit/do not transmit line separators to host*
10859 # transmit/do not transmit page tab stops tabs to host*
10860 # transmit/do not transmit column tab stop tabs to host*
10861 # transmit/do not transmit graphics control (underline,inverse..)*
10863 # enable*/disable auto XON/XOFF control
10864 # require/do not require receipt of a DC1 from host after each LF*
10865 # pause key acts as a meta key/pause key is pause*
10873 # XON character (17*)
10874 # XOFF character (19*)
10876 # C menu: 56 66 0 0 9600 0110 1100
10877 # number of lines to print data on (printer) (56*)
10879 # number of lines on a sheet of paper (printer) (66*)
10881 # left margin (printer) (0*)
10883 # number of pad chars on new line to printer (0*)
10885 # printer baud rate (9600*)
10887 # printer parity: 00=odd,01=even*,10=space,11=mark
10888 # printer stop bits: 2*/1
10889 # print/do not print guarded areas*
10891 # new line is: 01=LF,10=CR,11=CRLF*
10895 # D menu: 0110 1001 1 0
10896 # LF is newline/LF is down one line, same column*
10897 # wrap to preceding line if move left from col 1*/don't wrap
10898 # wrap to next line if move right from col 80*/don't wrap
10899 # backspace is/is not destructive*
10901 # display*/ignore DEL character
10902 # display will not/will scroll*
10903 # page/column tab stops*
10904 # erase everything*/erase unprotected only
10906 # editing extent: 0=display,1=line*,2=field,3=area
10911 annarbor4080|aa4080|ann arbor 4080,
10914 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
10915 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
10916 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
10917 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
10919 # Strange Ann Arbor terminal from BRL
10920 aas1901|Ann Arbor K4080 w/S1901 mod,
10923 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
10924 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
10927 # If you're using the GNU termcap library, add
10928 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
10929 # to these capabilities. This is the nonstandard GNU termcap scrolling
10930 # capability, arguments are:
10931 # 1. Total number of lines on the screen.
10932 # 2. Number of lines above desired scroll region.
10933 # 3. Number of lines below (outside of) desired scroll region.
10934 # 4. Total number of lines on the screen, the same as the first parameter.
10935 # The generic Ann Arbor entry is the only one that uses this.
10936 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
10937 OTbs, am, km, mc5i, mir, xon,
10939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
10940 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
10941 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
10942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10943 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10944 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10945 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
10946 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
10947 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
10948 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10949 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
10950 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
10951 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
10952 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
10953 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
10954 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
10955 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
10956 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
10957 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
10958 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
10959 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
10961 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
10962 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
10963 vpa=\E[%p1%{1}%+%dd,
10965 aaa+rv|ann arbor ambassador in reverse video,
10966 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
10967 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
10968 rs1=\E[H\E[7m\E[J$<156>,
10969 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
10970 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
10971 # Ambassador with the DEC option, for partial vt100 compatibility.
10972 aaa+dec|ann arbor ambassador in dec vt100 mode,
10973 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
10974 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
10975 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
10977 aaa-18|ann arbor ambassador/18 lines,
10979 is2=\E7\E[60;0;0;18p\E8,
10980 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
10982 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
10983 use=aaa+rv, use=aaa-18,
10984 aaa-20|ann arbor ambassador/20 lines,
10986 is2=\E7\E[60;0;0;20p\E8,
10987 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
10989 aaa-22|ann arbor ambassador/22 lines,
10991 is2=\E7\E[60;0;0;22p\E8,
10992 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
10994 aaa-24|ann arbor ambassador/24 lines,
10996 is2=\E7\E[60;0;0;24p\E8,
10997 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
10999 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11000 use=aaa+rv, use=aaa-24,
11001 aaa-26|ann arbor ambassador/26 lines,
11003 is2=\E7\E[60;0;0;26p\E8,
11004 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11005 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11006 aaa-28|ann arbor ambassador/28 lines,
11008 is2=\E7\E[60;0;0;28p\E8,
11009 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11010 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11011 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11014 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11015 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11016 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11017 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11018 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11019 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11020 use=aaa+rv, use=aaa-30-s,
11021 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11022 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11023 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11024 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11025 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11026 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11027 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11029 is2=\E7\E[60;0;0;30p\E8,
11030 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11031 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11032 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11033 use=aaa+rv, use=aaa-30,
11034 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11035 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11037 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11038 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11039 use=aaa+rv, use=aaa-30,
11040 aaa-36|ann arbor ambassador/36 lines,
11042 is2=\E7\E[60;0;0;36p\E8,
11043 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11044 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11045 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11046 use=aaa+rv, use=aaa-36,
11047 aaa-40|ann arbor ambassador/40 lines,
11049 is2=\E7\E[60;0;0;40p\E8,
11050 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11051 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11052 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11053 use=aaa+rv, use=aaa-40,
11054 aaa-48|ann arbor ambassador/48 lines,
11056 is2=\E7\E[60;0;0;48p\E8,
11057 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11058 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11059 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11060 use=aaa+rv, use=aaa-48,
11061 aaa-60-s|ann arbor ambassador/59 lines+status,
11064 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11065 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11066 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11067 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11068 use=aaa+rv, use=aaa-60-s,
11069 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11070 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11071 aaa-60|ann arbor ambassador/60 lines,
11073 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11075 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11076 use=aaa+rv, use=aaa-60,
11077 aaa-db|ann arbor ambassador 30/destructive backspace,
11079 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11081 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11083 flash=\E[>59h$<100>\E[>59l,
11084 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11085 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11086 guru+rv|guru changes for reverse video,
11087 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11088 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11089 use=guru+rv, use=guru-33,
11090 guru+s|guru status line,
11092 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11093 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11094 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11095 guru-nctxt|guru with no saved context,
11096 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11097 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11099 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11100 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11101 guru-24|ann arbor guru 24 lines,
11103 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11105 guru-44|ann arbor guru 44 lines,
11107 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11109 guru-44-s|ann arbor guru/44 lines+status,
11111 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11112 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11113 guru-76|guru with 76 lines by 89 cols,
11115 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11117 guru-76-s|ann arbor guru/76 lines+status,
11119 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11120 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11121 guru-76-lp|guru-lp|guru with page bigger than line printer,
11122 cols#134, lines#76,
11123 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11125 guru-76-w|guru 76 lines by 178 cols,
11126 cols#178, lines#76,
11127 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11129 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11130 cols#178, lines#75,
11131 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11132 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11133 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11134 cols#178, lines#76,
11135 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11137 aaa-rv-unk|ann arbor unknown type,
11138 lh#0, lw#0, nlab#0,
11139 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11140 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11142 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11143 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11145 #### Applied Digital Data Systems (adds)
11147 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11148 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11149 # terminals was merged again. Then AT&T sold the terminal business to
11150 # SunRiver, which later changed its name to Boundless Technologies. The
11151 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11152 # as of early 1995) are at:
11154 # Boundless Technologies
11155 # 100 Marcus Boulevard
11156 # Hauppauge, NY 11788-3762
11157 # Vox: (800)-231-5445
11158 # Fax: (516)-342-7378
11159 # Web: http://boundless.com
11161 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11162 # In 1995 Boundless acquired DEC's terminals business.
11165 # Regent: lowest common denominator, works on all regents.
11166 # (regent: renamed ":bc:" to ":le:" -- esr)
11167 regent|Adds Regent Series,
11170 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11171 home=\EY\s\s, ind=^J, ll=^A,
11172 # Regent 100 has a bug where if computer sends escape when user is holding
11173 # down shift key it gets confused, so we avoid escape.
11174 regent100|Adds Regent 100,
11177 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11178 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11179 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11180 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11181 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11182 regent20|Adds Regent 20,
11183 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11185 regent25|Adds Regent 25,
11186 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11188 regent40|Adds Regent 40,
11190 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11191 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11192 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11193 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11194 smul=\E0`, use=regent25,
11195 regent40+|Adds Regent 40+,
11196 is2=\EB, use=regent40,
11197 regent60|regent200|Adds Regent 60,
11198 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11199 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11201 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11202 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11203 viewpoint|addsviewpoint|adds viewpoint,
11206 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11207 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11208 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11209 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11210 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11211 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11212 # Some viewpoints have bad ROMs that foo up on ^O
11213 screwpoint|adds viewpoint with ^O bug,
11214 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11216 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11217 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11218 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11219 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11220 # invis=01000100 and %c is the logical or of desired attributes.
11221 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11223 # Update by TD - 2004:
11225 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11227 # COMMANDS ASCII CODE
11229 # Address, Absolute ESC,=,row,column
11231 # Aux Port Enable ESC,@
11232 # Aux Port Disable ESC,A
11236 # Cursor forward FF
11239 # Cursor supress ETB
11240 # Cursor enable CAN
11241 # Erase to end of line ESC,T
11242 # Erase to end of page ESC,Y
11245 # Keyboard unlock SO
11246 # Read current cursor position ESC,?
11247 # Set Attribute ESC,0,x (see below for values of x)
11248 # Tag bit reset ESC,(
11249 # Tag bit set ESC,)
11250 # Transparent Print on ESC,3
11251 # Transparent Print off ESC,4
11257 # Half Intensity A 0101
11259 # Half Intensity Blinking C 0103
11260 # Reverse Video P 0120
11261 # Reverse Video Half Intensity Q 0121
11262 # Reverse Video Blinking R 0122
11263 # Reverse Video Half Intensity
11265 # Underlined ` 0140
11266 # Underlined Half Intensity a 0141
11267 # Underlined Blinking b 0142
11268 # Underlined Half Intensity
11270 # Video suppress D 0104
11271 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11273 cols#80, it#8, lines#24,
11274 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11275 cub1=^H, cud1=^J, cuf1=^L,
11276 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
11277 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
11278 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11279 nel=^M^J, rev=\E0P\E), rmso=\E(,
11280 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
11281 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
11282 vp60|viewpoint60|addsvp60|adds viewpoint60,
11285 # adds viewpoint 90 - from cornell
11286 # Note: emacs sends ei occasionally to insure the terminal is out of
11287 # insert mode. This unfortunately puts the viewpoint90 IN insert
11288 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
11289 # - :ei=:im=: must be present in the termcap translation.)
11290 # - <xhp> indicates glitch that attributes stick to location
11291 # - <msgr> means it's safe to move in standout mode
11292 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
11294 # Function key and label capabilities merged in from SCO.
11295 vp90|viewpoint90|adds viewpoint 90,
11296 OTbs, bw, msgr, xhp,
11298 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
11299 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
11300 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
11301 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
11302 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
11303 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11304 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
11305 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
11306 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
11307 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
11308 # Note: if return acts weird on a980, check internal switch #2
11309 # on the top chip on the CONTROL pc board.
11310 adds980|a980|adds consul 980,
11313 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
11314 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
11315 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
11316 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
11317 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
11319 #### C. Itoh Electronics
11321 # As of 1995 these people no longer make terminals (they're still in the
11322 # printer business). Their terminals were all clones of the DEC VT series.
11323 # They're located in Orange County, CA.
11326 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
11327 # the delay times and do an auto tab set rather than the indirect
11328 # file used in vt100.
11329 cit80|cit-80|citoh 80,
11332 clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
11333 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
11334 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11335 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
11336 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
11337 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
11338 cit101|citc|C.itoh fast vt100,
11341 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
11342 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
11343 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
11344 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
11345 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
11346 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11347 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
11348 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
11350 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
11351 # The following termcap entry was created from the Callan cd100 entry. The
11352 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
11353 # full selection of combinations of reverse video, underline, and blink.
11354 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
11355 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
11356 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
11357 cit101e|C. Itoh CIT-101e,
11358 OTbs, OTpt, am, mir, msgr,
11359 cols#80, it#8, lines#24,
11360 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
11361 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
11362 cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
11363 el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
11364 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
11365 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
11366 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
11367 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
11368 smkx=\E=, smso=\E[7m, smul=\E[4m,
11369 # From: David S. Lawyer, June 1997:
11370 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
11371 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
11372 # late 1980's CIT Terminals went out of business.
11373 # There is no need to use the initialization string is=... (by invoking
11374 # tset or setterm etc.) provided that the terminal has been manually set
11375 # up (and the setup saved with ^S) to be compatible with this termcap. To be
11376 # compatible it should be in ANSI mode (not VT52). A set-up that
11377 # works is to set all the manually setable stuff to factory defaults
11378 # by pressing ^D in set-up mode. Then increse the brighness with the
11379 # up-arrow key since the factory default will likely be dim on an old
11380 # terminal. Then change any options you want (provided that they are
11381 # compatible with the termcap). For my terminal I set: Screen
11382 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
11383 # on. I also set up mine for parity (but you may not need it). Then
11384 # save the setup with ^S.
11385 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
11386 cit101e-rv|Citoh CIT-101e (sets reverse video),
11387 am, eo, mir, msgr, xenl, xon,
11388 cols#80, it#8, lines#24,
11389 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11390 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
11391 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11392 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11393 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11394 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11395 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
11396 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11397 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11398 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
11399 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11400 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
11401 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
11402 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
11403 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
11404 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
11405 u7=\E[6n, u8=\E[?6c, u9=\E[c,
11406 cit101e-n|CIT-101e w/o am,
11408 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11410 cit101e-132|CIT-101e with 132 cols,
11412 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
11413 cit101e-n132|CIT-101e with 132 cols w/o am,
11416 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11418 # CIE Terminals CIT-500 from BRL
11419 # The following SET-UP modes are assumed for normal operation:
11420 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
11421 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
11422 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
11423 # Other SET-UP modes may be set for operator convenience or communication
11425 # Hardware tabs are assumed to be set every 8 columns; they can be set up
11426 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
11427 # "stty ixon -ixany" to enable DC3/DC1 flow control!
11428 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
11429 cit500|CIE Terminals CIT-500,
11430 OTbs, OTpt, mir, msgr, xon,
11431 OTkn#10, cols#80, it#8, lines#64, vt#3,
11432 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11433 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11434 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11435 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11436 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11437 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
11438 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
11439 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
11440 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
11441 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
11442 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
11443 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
11444 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
11445 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
11446 rmso=\E[m, rmul=\E[m,
11447 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
11448 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
11449 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11451 # C. Itoh printers begin here
11452 citoh|ci8510|8510|c.itoh 8510a,
11455 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
11456 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
11458 citoh-pica|citoh in pica,
11459 is1=\EN, use=citoh,
11460 citoh-elite|citoh in elite,
11463 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
11465 citoh-comp|citoh in compressed,
11468 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
11470 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
11471 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
11473 is1=\EP, use=citoh,
11474 citoh-6lpi|citoh in 6 lines per inch mode,
11475 is3=\EA, use=citoh,
11476 citoh-8lpi|citoh in 8 lines per inch mode,
11478 is3=\EB, use=citoh,
11480 #### Control Data (cdc)
11483 cdc456|cdc 456 terminal,
11486 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11487 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
11488 el=^V, home=^Y, il1=\EL, ind=^J,
11490 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
11494 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11495 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11496 kcuu1=^W, khome=^Y,
11497 cdc721ll|CDC Vikingll,
11499 cols#132, lines#24,
11500 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11501 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11502 kcuu1=^W, khome=^Y,
11503 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
11507 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11508 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
11509 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
11511 # The following switch/key settings are assumed for normal operation:
11512 # 96 chars SCROLL FULL duplex not BLOCK
11513 # Other switches may be set according to communication requirements.
11514 # Insert/delete-character cannot be used, as the whole display is affected.
11515 # "so" & "se" are commented out until jove handles "sg" correctly.
11518 OTkn#10, cols#80, lines#24,
11519 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11520 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
11521 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
11522 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
11523 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
11524 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
11525 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
11526 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
11527 rs1=\031\030\002\003\017,
11529 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
11531 # Part of the long initialization string defines the "DOWN" key to the left
11532 # of the tab key to send an ESC. The real ESC key is positioned way out
11535 # The termcap won't work in 132 column mode due to the way it it moves the
11536 # cursor. Termcap doesn't have the capability (as far as I could tell) to
11537 # handle the 721 in 132 column mode.
11539 # (cdc721: changed :ri: to :sr: -- esr)
11540 cdc721-esc|Control Data 721,
11541 OTbs, OTpt, am, bw, msgr, xon,
11542 OTkn#10, cols#80, it#8, lines#30,
11543 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
11544 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
11545 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
11546 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
11547 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
11548 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
11549 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
11550 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
11551 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
11552 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
11553 smso=^^D, smul=^\, tbc=^^^RY,
11557 # Getronics is a Dutch electronics company that at one time was called
11558 # `Geveke' and made async terminals; but (according to the company itself!)
11559 # they've lost all their documentation on the command set. The hardware
11560 # documentation suggests the terminals were actually manufactured by a
11561 # Taiwanese electronics company named Cal-Comp. There are known
11562 # to have been at least two models, the 33 and the 50.
11565 # The 50 seems to be a top end vt220 clone, with the addition of a higher
11566 # screen resolution, a larger screen, at least 1 page of memory above and
11567 # below the screen, apparently pages of memory right and left of the screen
11568 # which can be panned, and about 75 function keys (15 function keys x normal,
11569 # shift, control, func A, func B). It also has more setup possibilities than
11570 # the vt220. The monitor case is dated November 1978 and the keyboard case is
11573 # The vt100 emulation works as is. The entry below describes the rather
11574 # non-conformant (but more featureful) ANSI mode.
11576 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
11577 visa50|geveke visa 50 terminal in ansi 80 character mode,
11580 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
11581 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
11582 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11583 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11584 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11585 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
11586 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
11587 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11588 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
11589 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
11590 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
11591 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
11592 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
11593 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
11594 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
11595 lf3=A insert line, lf4=A delete line, lf5=A clear,
11596 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
11597 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
11598 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
11599 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
11600 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
11603 #### Human Designed Systems (Concept)
11605 # Human Designed Systems
11607 # King of Prussia, PA 19406
11608 # Vox: (610)-277-8300
11609 # Fax: (610)-275-5739
11610 # Net: support@hds.com
11612 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
11613 # the character-terminal business now (1995) and making X terminals. In
11614 # particular, the whole `Concept' line described here was discontinued long
11618 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
11619 # Extensive changes to c108 by arpavax:eric Feb 1982
11620 # Some unknown person at SCO then translated it to terminfo.
11622 # There seem to be a number of different versions of the C108 PROMS
11623 # (with bug fixes in its Z-80 program).
11625 # The first one that we had would lock out the keyboard of you
11626 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
11627 # Try that on your C108 and see if it sends a ^S when you type it.
11628 # If so, you have an old version of the PROMs.
11630 # You should configure the C108 to send ^S/^Q before running this.
11631 # It is much faster (at 9600 baud) than the c100 because the delays
11633 # new status line display entries for c108-8p:
11634 # <is3> - init str #3 - setup term for status display -
11635 # set programmer mode, select window 2, define window at last
11636 # line of memory, set bkgnd stat mesg there, select window 0.
11638 # <tsl> - to status line - select window 2, home cursor, erase to
11639 # end-of-window, 1/2 bright on, goto(line#0, col#?)
11641 # <fsl> - from status line - 1/2 bright off, select window 0
11643 # <dsl> - disable status display - set bkgnd status mesg with
11646 # There are probably more function keys that should be added but
11647 # I don't know what they are.
11649 # No delays needed on c108 because of ^S/^Q handshaking
11651 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
11652 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
11653 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
11654 c108-4p|concept108-4p|concept 108 w/4 pages,
11655 OTbs, eslok, hs, xon,
11657 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
11658 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
11659 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
11660 ind=^J, is1=\EK\E!\E F,
11661 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
11662 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
11663 smcup=\EU\Ev 8p\Ep\r\E\025,
11664 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
11665 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
11666 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
11668 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
11669 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
11671 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
11673 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
11674 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
11677 # These have only window relative cursor addressing, not screen
11678 # relative. To get it to work right here, smcup/rmcup (which
11679 # were invented for the concept) lock you into a one page
11680 # window for screen style programs.
11682 # To get out of the one page window, we use a clever trick:
11683 # we set the window size to zero ("\Ev " in rmcup) which the
11684 # terminal recognizes as an error and resets the window to all
11687 # This trick works on c100 but does not on c108, sigh.
11689 # Some tty drivers use cr3 for concept, others use nl3, hence
11690 # the delays on cr and ind below. This padding is only needed at
11691 # 9600 baud and up. One or the other is commented out depending on
11692 # local conventions.
11694 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
11695 # less than 6 but more than 2 will work.
11697 # Note: can't use function keys f7-f10 because they are
11698 # indistinguishable from arrow keys (!), also, del char and
11699 # clear eol use xon/xoff so they probably won't work very well.
11701 # Also note that we don't define insrt/del char/delline/eop/send
11702 # because they don't transmit unless we reset them - I figured
11703 # it was a bad idea to clobber their definitions.
11705 # The <mc5> sequence changes the escape character to ^^ so that
11706 # escapes will be passed through to the printer. Only trouble
11707 # is that ^^ won't be - ^^ was chosen to be unlikely.
11708 # Unfortunately, if you're sending raster bits through to be
11709 # plotted, any character you choose will be likely, so we lose.
11711 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
11712 # cannot be # in is2 because it will hang a c100 with no printer
11714 c100|concept100|concept|c104|c100-4p|hds concept 100,
11715 OTbs, am, eo, mir, ul, xenl,
11716 cols#80, lines#24, pb#9600, vt#8,
11717 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
11718 cub1=^H, cud1=^J, cuf1=\E=,
11719 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
11720 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
11721 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
11722 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
11724 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
11725 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
11726 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
11727 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
11728 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
11729 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
11730 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
11731 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
11732 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
11733 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
11734 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
11735 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
11736 smso=\ED, smul=\EG,
11737 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
11738 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
11739 smso=\EE, use=c100,
11740 oc100|oconcept|c100-1p|old 1 page concept 100,
11744 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
11745 # Lots of notes, originally inline, but ncurses doesn't grok that.
11747 # am: not available in power on mode, but turned on with \E[=107;207h in
11748 # is2=. Also, \E=124l in is2= could have been used to prevent needing
11749 # to specify xenl:, but that would have rendered the last space on the
11750 # last line useless.
11751 # bw: Not available in power on mode, but turned on with \E[=107;207h in
11753 # clear: Could be done with \E[2J alone, except that vi (and probably most
11754 # other programs) assume that this also homes the cursor.
11755 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
11756 # scroll the window, and go back to window 1.
11757 # is2: the string may cause a warning to be issued by tic that it
11758 # found a very long line and that it suspects that a comma is missing
11759 # somewhere. This warning can be ignored (unless it comes up more than
11760 # once). The initialization string contains the following commands:
11762 # [Setup mode items changed from factory defaults:]
11763 # \E)0 set alternate character set to
11765 # ^O set character set to default
11766 # [In case it wasn't]
11767 # \E[m turn off all attributes
11768 # [In case they weren't off]
11769 # \E[=107; cursor wrap and
11770 # 207h character wrap on
11771 # \E[90;3u set Fkey definitions to "transmit"
11773 # \E[92;3u set cursor key definitions to
11774 # "transmit" defaults
11775 # \E[43;1u set shift F13 to transmit...
11777 # \E[44;1u set shift F14 to transmit...
11779 # \E[45;1u set shift F15 to transmit...
11781 # \E[46;1u set shift F16 to transmit...
11783 # \E[200;1u set shift up to transmit...
11785 # \E[201;1u set shift down to transmit...
11787 # \E[202;1u set shift right to transmit...
11789 # \E[203;1u set shift left to transmit...
11791 # \E[204;1u set shift home to transmit...
11793 # \E[212;1u set backtab to transmit...
11795 # \E[213;1u set shift backspace to transmit...
11797 # \E[214;1u set shift del to transmit...
11799 # [Necessary items not mentioned in setup mode:]
11800 # \E[2!w move to window 2
11801 # \E[25;25w define window as line 25 of memory
11802 # \E[!w move to window 1
11803 # \E[2*w show current line of window 2 as
11805 # \E[2+x set meta key to use high bit
11806 # \E[;3+} move underline to bottom of character
11808 # All Fkeys are set to their default transmit definitions with \E[90;3u
11809 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
11810 # setting MUST be redefined or deactivated, because the default is
11811 # contained in almost all of this terminal's Fkey strings! If for some
11812 # reason "quit" cannot be altered, the Fkeys can, but it would be
11813 # necessary to change ^| to ^] in all of these definitions, and add
11814 # \E[2;029!t to is2.
11815 # lines: is set to 24 because this terminal refuses to treat the 25th
11817 # ll: Not available in power on mode, but turned on with \E[=107;207h in
11819 # lm: Pointless, given that this definition locks a single screen of
11820 # memory into view, but what the hey...
11821 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
11822 # other attributes alone), but some programs expect this to turn off
11824 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
11825 # attributes alone), but some programs expect this to turn off
11827 # sgr: Attributes are set on this terminal with the string \E[ followed by
11828 # a list of attribute code numbers (in decimal, separated by
11829 # semicolons), followed by the character m. The attribute code
11832 # 2 for dim (which is ignored in power on mode);
11836 # 8 for not displayable; and
11837 # =99 for protected (except that there are strange side
11838 # effects to protected characters which make them inadvisable).
11839 # The mapping of terminfo parameters to attributes is as follows:
11840 # %p1 (standout) = bold and inverse together;
11841 # %p2 (underline) = underline;
11842 # %p3 (reverse) = inverse;
11843 # %p4 (blink) = blinking;
11844 # %p5 (dim) is ignored;
11845 # %p6 (bold) = bold;
11846 # %p7 (invisible) = not displayable;
11847 # %p8 (protected) is ignored; and
11848 # %p9 (alt char set) = alt char set.
11849 # The code to do this is:
11851 # %?%p1%p6%O IF (standout; bold) OR
11852 # %t;1 THEN OUTPUT ;1
11854 # %?%p2 IF underline
11855 # %t;4 THEN OUTPUT ;4
11858 # %t;5 THEN OUTPUT ;5
11860 # %?%p1%p3%O IF (standout; reverse) OR
11861 # %t;7 THEN OUTPUT ;7
11863 # %?%p7 IF invisible
11864 # %t;8 THEN OUTPUT ;8
11867 # %?%p9 IF altcharset
11868 # %t^N THEN OUTPUT ^N
11869 # %e^O ELSE OUTPUT ^O
11871 # sgr0: Everything is turned off (including alternate character set), since
11872 # there is no way of knowing what it is that the program wants turned
11874 # smul: The "underline" attribute is reconfigurable to an overline or
11875 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
11876 # bottom of the character cell. This was done to allow for more readable
11877 # underlined characters, and to be able to distinguish between an
11878 # underlined space, an underscore, and an underlined underscore.
11879 # xenl: Terminal can be configured to not need this, but this "glitch"
11880 # behavior is actually preferable with autowrap terminals.
11882 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
11883 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
11884 # string modifies the 'O' in kf43 to kf46 to a '$'.
11886 # kcbt was originally ^I but redefined in is2=.
11887 # kHOM was \E[H originally but redefined in is2=, as were a number of
11889 # kDC was originally \177 but redefined in is2=.
11891 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
11892 # tsl: Go to window 2, then do an hpa=.
11894 #------- flash=\E[8;3!}^G\E[3;3!}
11895 #------- flash=\E[?5h$<100>\E[?5l
11896 # There are two ways to flash the screen, both of which have their drawbacks.
11897 # The first is to set the bell mode to video, transmit a bell character, and
11898 # set the bell mode back - but to what? There is no way of knowing what the
11899 # user's old bell setting was before we messed with it. Worse, the command to
11900 # set the bell mode also sets the key click volume, and there is no way to say
11901 # "leave that alone", or to know what it's set to, either.
11902 # The second way to do a flash is to set the screen to inverse video, pad for a
11903 # tenth of a second, and set it back - but like before, there's no way to know
11904 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
11905 # it that way. The point is moot anyway, since vi (and probably other
11906 # programs) assume that by defining flash=, you want the computer to use it
11907 # INSTEAD of bel=, rather than as a secondary type of signal.
11909 #------- cvvis=\E[+{
11910 # The is the power on setting, which is also as visible as the cursor
11912 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
11913 # Windowing is possible, but not defined here because it is also used to
11914 # emulate status line functions. Allowing a program to set a window could
11915 # clobber the status line or render it unusable. There is additional memory,
11916 # but screen scroll functions are destructive and do not make use of it.
11918 #------- dim= Not available in power on mode.
11919 # You have a choice of defining low intensity characters as "half bright" and
11920 # high intensity as "normal", or defining low as "normal" and high as "bold".
11921 # No matter which you choose, only one of either "half bright" or "bold" is
11922 # available at any time, so taking the time to override the default is
11925 #------- prot=\E[=0;99m
11926 # Not defined, because it appears to have some strange side effects.
11927 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
11928 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
11929 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
11930 # Available, but making them available to programs is inadvisable.
11931 # The code to do this is:
11932 # %?%p1%{24}%< IF ((key; 24) <;
11933 # %p1%{30}%> ((key; 30) >;
11934 # %p1%{54}%< (key; 54) <
11937 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
11938 # %t\E[ THEN OUTPUT \E[
11939 # %p1%d OUTPUT (key) as decimal
11940 # [next line applies to pfx only]
11944 # %p2%s OUTPUT (string) as string
11946 # [DEL chosen as delimiter, but could be any character]
11947 # [implied: ELSE do nothing]
11951 # Not defined since anything it might do could be done faster and easier with
11952 # either Meta-Shift-Reset or the main power switch.
11954 #------- smkx=\E[1!z
11955 #------- rmkx=\E[!z
11956 # These sequences apply to the cursor and setup keys only, not to the
11957 # numeric keypad. But it doesn't matter anyway, since making these
11958 # available to programs is inadvisable.
11959 # For the key definitions below, all sequences beginning with \E$ are
11960 # custom and programmed into the terminal via is2. \E$ also has no
11961 # meaning to any other terminal.
11963 #------- cmdch=\E[;%p1%d!t
11964 # Available, but making it available to programs is inadvisable.
11965 #------- smxon=\E[1*q
11966 # Available, but making it available to programs is inadvisable.
11967 # Terminal will send XON/XOFF on buffer overflow.
11968 #------- rmxon=\E[*q
11969 # Available, but making it available to programs is inadvisable.
11970 # Terminal will not notify on buffer overflow.
11971 #------- smm=\E[2+x
11973 # Available, but making them available to programs is inadvisable.
11976 # It's not made clear in the manuals, but based on other ansi/vt type
11977 # terminals, it's a good guess that this terminal is capable of both
11978 # "transparent print" (which doesn't copy data to the screen, and
11979 # therefore needs mc5i: specified to say so) and "auxilliary print"
11980 # (which does duplicate printed data on the screen, in which case mc4=
11981 # and mc5= should use the \E[?4i and \E[?5i strings instead).
11983 hds200|Human Designed Systems HDS200,
11984 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
11985 cols#80, it#8, lines#24, lm#0,
11986 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
11987 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
11988 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
11989 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11990 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11991 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11992 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11993 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
11994 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11995 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11997 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
11998 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
11999 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12000 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12001 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12002 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12003 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12004 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12005 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12006 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12007 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12008 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12009 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12010 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12011 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12012 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12013 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
12014 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
12015 rmul=\E[m\017, sc=\E7,
12016 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12017 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12018 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12021 # <ht> through <el> included to specify padding needed in raw mode.
12022 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12023 avt-ns|concept avt no status line,
12024 OTbs, am, eo, mir, ul, xenl, xon,
12025 cols#80, it#8, lines#24, lm#192,
12026 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12027 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12028 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12029 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12030 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12031 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12032 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12033 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12034 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12035 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12036 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12037 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12038 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12039 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12040 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12041 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12042 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12043 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12044 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12046 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
12047 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
12048 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
12049 tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
12050 avt-rv-ns|concept avt in reverse video mode/no status line,
12051 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12053 avt-w-ns|concept avt in 132 column mode/no status line,
12054 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12056 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12057 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12058 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12060 # Concept AVT with status line. We get the status line using the
12061 # "Background status line" feature of the terminal. We swipe the
12062 # first line of memory in window 2 for the status line, keeping
12063 # 191 lines of memory and 24 screen lines for regular use.
12064 # The first line is used instead of the last so that this works
12065 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12066 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12068 avt+s|concept avt status line changes,
12071 dsl=\E[0*w, fsl=\E[1;1!w,
12072 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12073 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12074 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12075 avt|avt-s|concept-avt|avt w/80 columns,
12076 use=avt+s, use=avt-ns,
12077 avt-rv|avt-rv-s|avt reverse video w/sl,
12078 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12079 use=avt+s, use=avt-ns,
12080 avt-w|avt-w-s|concept avt 132 cols+status,
12081 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12082 use=avt+s, use=avt-ns,
12083 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12084 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12085 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12087 #### Contel Business Systems.
12090 # Contel c300 and c320 terminals.
12091 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12093 cols#80, lines#24, xmc#1,
12094 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12095 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12096 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12097 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12098 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12099 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12100 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12101 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12102 # Contel c301 and c321 terminals.
12103 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12104 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12107 #### Data General (dg)
12109 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12110 # the terminals group at Data General was shut down in 1991; all these
12111 # terminals have thus been discontinued.
12113 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12114 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12115 # sequentially, first the unmodified key codes are listed as F1 through F15.
12116 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12117 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12118 # F46 through F60. This is done in the private "includes" below whose names
12119 # start with "dgkeys+".
12121 # DG terminals generally support 8 bit characters. For each of these terminals
12122 # two descriptions are supplied:
12123 # 1) A default description for 8 bits/character communications, which
12124 # uses the default DG international character set and keyboard codes.
12125 # 2) A description with suffix "-7b" for 7 bits/character communications.
12126 # This description must use the NON-DEFAULT native keyboard language.
12128 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12129 # Ctrl/Shift fdkeys (kf34-kf44).
12131 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12132 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12133 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12134 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12135 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12136 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12137 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12138 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12139 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12140 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12141 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12142 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12143 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12144 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12145 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12146 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12147 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12148 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12149 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12150 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12151 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12152 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12153 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12154 khome=\233H, kprt=\233i,
12156 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12157 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12158 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12159 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12160 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12161 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12162 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12163 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12164 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12165 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12166 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12167 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12168 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12169 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12170 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12171 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12172 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12173 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12174 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12176 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12177 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12178 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12179 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12180 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12181 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12182 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12183 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12184 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12185 kf8=^^x, kf9=^^y, khome=^H,
12187 dgkeys+15|Private entry describing 15 DG mode special keys,
12188 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12189 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12190 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12191 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12192 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12193 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12194 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12195 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12196 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12197 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12198 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12201 # Data General color terminals use the "Tektronix" color model. The total
12202 # number of colors varies with the terminal model, as does support for
12203 # attributes used in conjunction with color.
12205 # Removed u7, u8 definitions since they conflict with tack:
12206 # Preserve user-defined colors in at least some cases.
12208 # Default is ACM mode.
12209 # u8=^^F}20^^Fi^^F}21,
12211 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12213 colors#16, ncv#53, pairs#256,
12215 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12216 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12217 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12219 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12222 # Video attributes are coordinated using static variables set by "sgr", then
12223 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12224 # (D=dim, U=underline, B=blink, R=reverse.)
12225 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12227 colors#8, ncv#16, pairs#64,
12228 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12229 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12230 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12231 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12232 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12234 dg+color|Color info for Data General D470C terminals in ANSI mode,
12235 colors#16, ncv#53, pairs#256,
12236 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12237 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12238 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12239 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12242 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12244 colors#8, ncv#16, pairs#64,
12246 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12247 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12248 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12250 dgmode+color|Color info for Data General D470C terminals in DG mode,
12251 colors#16, pairs#256,
12252 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12253 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12256 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12258 colors#52, ncv#53, pairs#26,
12259 initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
12260 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12261 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12262 scp=\036RG2%p1%02X,
12264 # Colors are in the order: normal, reverse, dim, dim + reverse.
12265 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12267 colors#52, ncv#53, pairs#26,
12268 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12269 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12270 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12271 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12273 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12274 # Initialization string 1 sets:
12275 # ^R - vertical scrolling enabled
12276 # ^C - blinking enabled
12277 dg-generic|Generic Data General terminal in DG mode,
12280 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12281 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
12282 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
12283 smul=^T, use=dgkeys+11,
12285 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
12286 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
12287 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
12288 # maybe they were originally nuls (which would fit).
12290 dg200|data general dasher 200,
12293 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12294 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
12295 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
12296 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
12297 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
12300 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
12301 dg210|dg-ansi|Data General 210/211,
12304 OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
12305 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
12306 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12307 nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
12309 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
12310 # courtesy of Carlos Rucalde of Vantage Software, Inc.
12311 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
12312 # I suspect the d200 function keys actually work on the dg211, check it out.)
12313 dg211|Data General d211,
12314 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
12315 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
12316 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
12318 # dg450 from Cornell (not official)
12319 dg450|dg6134|data general 6134,
12320 cub1@, cuf1=^X, use=dg200,
12323 # Note: lesser Dasher terminals will not work with vi because vi insists upon
12324 # having a command to move straight down from any position on the bottom line
12325 # and scroll the screen up, or a direct vertical scroll command. The 460 and
12326 # above have both, the D210/211, for instance, has neither. We must use ANSI
12327 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
12328 # backspace on all terminals. This is not so in DG mode.
12329 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
12330 # grounds that there is no matching ":ml:"
12331 # fixed garbled ":k9=\E[00\:z:" capability -- esr)
12332 dg460-ansi|Data General Dasher 460 in ANSI-mode,
12333 OTbs, am, msgr, ul,
12334 cols#80, it#8, lines#24,
12335 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
12336 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
12337 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12338 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
12339 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12340 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
12341 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
12342 kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
12343 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
12344 ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
12346 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
12347 # Data General 605x
12348 # Ought to work for a Model 6242, Type D210 as well as a 605x.
12349 # Note that the cursor-down key transmits ^Z. Job control users, beware!
12350 # This also matches a posted description of something called a `Dasher 100'
12351 # so there's a dg100 alias here.
12352 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
12353 dg6053-old|dg100|data general 6053,
12356 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
12357 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
12358 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
12359 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
12360 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
12361 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
12364 # (Some performance can be gained over the generic DG terminal type)
12365 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
12367 home=^P\0\0, ll=^P\0^W, use=dg-generic,
12369 # Like 6053, but adds reverse video and more keypad and function keys.
12370 d200|d200-dg|Data General DASHER D200,
12371 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
12372 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
12373 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
12376 # DASHER D210 series terminals in ANSI mode.
12377 # Reverse video, no insert/delete character/line, 7 bits/character only.
12379 # Initialization string 1 sets:
12380 # <0 - scrolling enabled
12381 # <1 - blink enabled
12382 # <4 - print characters regardless of attributes
12383 d210|d214|Data General DASHER D210 series,
12386 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
12387 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12388 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12389 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
12390 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
12391 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12392 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
12393 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
12395 # DASHER D210 series terminals in DG mode.
12396 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
12397 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
12399 ed=^^FF, use=d200-dg,
12401 # DASHER D211 series terminals in ANSI mode.
12402 # Like the D210, but with 8-bit characters and local printer support.
12404 # Initialization string 2 sets:
12406 # 2;1 - 8 bit operations
12407 # 1;1 - 8 bit (international) keyboard language
12408 # \E(B - default primary character set (U.S. ASCII)
12409 # \E)4 - default secondary character set (international)
12410 # ^O - primary character set
12412 d211|d215|Data General DASHER D211 series,
12414 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
12417 # Initialization string 2 sets:
12419 # 2;0 - 7 bit operations
12420 # 1;0 - 7 bit (native) keyboard language
12421 # \E(0 - default character set (the keyboard native language)
12422 # ^O - primary character set
12423 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
12425 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
12427 # Like the D210 series, but adds support for 8-bit characters.
12429 # Reset string 2 sets:
12430 # ^^N - secondary character set
12431 # ^^FS0> - 8 bit international character set
12432 # ^^O - primary character set
12433 # ^^FS00 - default character set (matching the native keyboard language)
12435 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
12437 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
12439 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
12442 # Enhanced DG mode with changes to be more UNIX compatible.
12443 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
12446 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
12447 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
12448 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
12449 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
12450 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
12451 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
12452 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
12453 rs2=\036N\036FS0E\036O\036FS00,
12454 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12455 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
12456 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
12457 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
12459 is3=\036Fz2, use=d216+,
12461 d217-unix|Data General DASHER D217 in DG-UNIX mode,
12463 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
12466 # DASHER D220 color terminal in ANSI mode.
12467 # Like the D470C but with fewer colors and screen editing features.
12469 # Initialization string 1 sets:
12471 # <0 - scrolling enabled
12472 # <1 - blink enabled
12473 # <4 - print characters regardless of attributes
12474 # \E[m - all attributes off
12475 # Reset string 1 sets:
12476 # \Ec - initial mode defaults (RIS)
12478 d220|Data General DASHER D220,
12480 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12481 use=dg+color8, use=d470c,
12483 d220-7b|Data General DASHER D220 in 7 bit mode,
12485 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12486 use=dg+color8, use=d470c-7b,
12488 # Initialization string 3 sets:
12489 # - default cursor (solid rectangle)
12490 # Reset string 2 sets:
12491 # ^^N - secondary character set
12492 # ^^FS0> - 8 bit international character set
12493 # ^^O - primary character set
12494 # ^^FS00 - default character set (matching the native keyboard language)
12496 d220-dg|Data General DASHER D220 color terminal in DG mode,
12498 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
12499 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
12502 # DASHER D230C color terminal in ANSI mode.
12503 # Like the D220 but with minor ANSI compatibility improvements.
12505 d230c|d230|Data General DASHER D230C,
12506 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
12507 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
12508 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12509 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
12510 smul=\E[4;50m, use=dgkeys+7b, use=d220,
12512 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
12515 # DASHER D400/D450 series terminals.
12516 # These add intelligent features like insert/delete to the D200 series.
12518 # Initialization string 2 sets:
12519 # ^^FQ2 - default cursor (solid rectangle)
12520 # ^^FW - character protection disabled
12521 # ^^FJ - normal (80 column) mode
12522 # ^^F\^ - horizontal scrolling enabled (for alignment)
12523 # ^^FX004? - margins at columns 0 and 79
12524 # ^^F] - horizontal scrolling disabled
12525 # ^^O - primary character set
12526 # ^^FS00 - default character set (the keyboard native language)
12527 # - (should reset scrolling regions, but that glitches the screen)
12528 # Reset string 1 sets:
12529 # ^^FA - all terminal defaults except scroll rate
12530 # Reset string 2 sets:
12531 # ^^F] - horizontal scrolling disabled
12532 # ^^FT0 - jump scrolling
12534 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
12536 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
12537 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
12538 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
12539 ich1=^^J, il1=^^FH,
12540 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
12541 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
12542 rs1=^^FA, rs2=\036F]\036FT0,
12543 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
12544 sgr0=\017\025\035\036E\036O, smacs=^^N,
12545 vpa=\020\177%p1%c, use=d210-dg,
12547 # DASHER D410/D460 series terminals in ANSI mode.
12548 # These add a large number of intelligent terminal features.
12550 # Initialization string 1 sets:
12552 # <0 - scrolling enabled
12553 # <1 - blink enabled
12554 # <2 - horizontal scrolling enabled (for alignment)
12555 # <4 - print characters regardless of attributes
12556 # \E[5;0v - normal (80 column) mode
12557 # \E[1;1;80w - margins at columns 1 and 80
12559 # 1 - print all characters even if protected
12560 # 6 - character protection disabled
12561 # <2 - horizontal scrolling disabled
12562 # - (should reset scrolling regions, but that glitches the screen)
12564 # Initialization string 2 sets:
12566 # 3;2 - default cursor (solid rectangle)
12567 # 2;1 - 8 bit operations
12568 # 1;1 - international keyboard language
12569 # \E(B - default primary character set (U.S. ASCII)
12570 # \E)4 - default secondary character set (international)
12571 # ^O - primary character set
12573 # Reset string 1 sets:
12574 # \Ec - initial mode defaults (RIS)
12575 # \E[<2h - horizontal scrolling disabled
12577 # Reset string 2 sets:
12579 # 4;0 - jump scrolling
12580 # 2;1 - 8 bit operations
12581 # 1;1 - 8 bit (international) keyboard language
12582 # \E(B - default primary character set (U.S. ASCII)
12583 # \E)4 - default secondary character set (international)
12585 d410|d411|d460|d461|Data General DASHER D410/D460 series,
12587 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
12588 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12589 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
12590 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
12591 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
12592 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
12593 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
12594 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
12595 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
12597 # Initialization string 2 sets:
12599 # 3;2 - default cursor (solid rectangle)
12600 # 2;0 - 7 bit operations
12601 # 1;0 - 7 bit (native) keyboard language
12602 # \E(0 - default character set (the keyboard native language)
12603 # ^O - primary character set
12605 # Reset string 2 sets:
12607 # 4;0 - jump scrolling
12608 # 2;0 - 7 bit operations
12609 # 1;0 - 7 bit (native) keyboard language
12610 # \E(0 - default character set (the keyboard native language)
12612 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
12614 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
12615 rs2=\E[4;0;2;0;1;0v\E(0,
12616 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
12617 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
12619 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
12621 enacs@, rmacs=\036FS00,
12622 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12623 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
12626 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
12628 # Initialization string 1 sets:
12630 # <0 - scrolling enabled
12631 # <1 - blink enabled
12632 # <2 - horizontal scrolling enabled (for alignment)
12633 # <4 - print characters regardless of attributes
12634 # \E[5;1v - compressed (135 column) mode
12635 # \E[1;1;126 - margins at columns 1 and 126
12637 # 1 - print all characters even if protected
12638 # 6 - character protection disabled
12639 # <2 - horizontal scrolling disabled
12640 # - (should reset scrolling regions, but that glitches the screen)
12642 # Reset string 1 sets:
12643 # \Ec - initial mode defaults (RIS)
12644 # \E[5;1v - compressed (135 column) mode
12645 # \E[1;1;126w - margins at columns 1 and 126
12646 # \E[<2h - horizontal scrolling disabled
12648 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
12650 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12651 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
12653 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
12655 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12656 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
12658 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
12661 # These add intelligent features like scrolling regions.
12662 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
12663 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
12664 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
12665 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
12666 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
12667 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
12668 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
12669 vpa=\036FPFF%p1%2.2X,
12670 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12672 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
12674 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
12675 rs2=\036P@1\036FK\036FX0083,
12676 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
12678 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
12681 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12683 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
12685 clear=\036FG\036PH, fsl=\036F}01\022,
12686 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
12687 tsl=\036F}00\036FP%p1%2.2X18\036PG,
12688 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
12691 # Relative cursor motions are confined to the current window,
12692 # which is not what the scrolling region specification expects.
12693 # Thus, relative vertical cursor positioning must be deleted.
12694 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
12695 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
12696 cud1@, cuu1@, ll@, use=d462+,
12698 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
12700 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
12702 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
12704 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
12706 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
12709 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
12711 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
12713 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
12715 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
12717 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
12720 d430c-dg|d430-dg|Data General D430C in DG mode,
12721 use=d413-dg, use=dg+fixed,
12722 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
12723 use=d413-dg, use=dg+ccc,
12725 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
12726 use=d413-unix, use=dgunix+fixed,
12727 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
12728 use=d413-unix-w, use=dgunix+fixed,
12729 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
12730 use=d413-unix-25, use=dgunix+fixed,
12731 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
12732 use=d413-unix-s, use=dgunix+fixed,
12733 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
12734 use=d413-unix-sr, use=dgunix+fixed,
12735 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
12736 use=d413-unix, use=dgunix+ccc,
12737 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
12738 use=d413-unix-w, use=dgunix+ccc,
12739 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
12740 use=d413-unix-25, use=dgunix+ccc,
12741 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
12742 use=d413-unix-s, use=dgunix+ccc,
12743 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
12744 use=d413-unix-sr, use=dgunix+ccc,
12746 # DASHER D470C color terminal in ANSI mode.
12747 # Like the D460 but with 16 colors and without a compressed mode.
12749 # Initialization string 1 sets:
12751 # <0 - scrolling enabled
12752 # <1 - blink enabled
12753 # <2 - horizontal scrolling enabled (for alignment)
12754 # <4 - print characters regardless of attributes
12755 # \E[1;1;80w - margins at columns 1 and 80
12757 # 1 - print all characters even if protected
12758 # 6 - character protection disabled
12759 # <2 - horizontal scrolling disabled
12760 # - (should reset scrolling regions, but that glitches the screen)
12762 d470c|d470|Data General DASHER D470C,
12763 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12764 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12765 use=dg+color, use=d460,
12767 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
12768 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12769 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
12770 use=dg+color, use=d460-7b,
12772 # Initialization string 2 sets:
12773 # ^^FQ2 - default cursor (solid rectangle)
12774 # ^^FW - character protection disabled
12775 # ^^F\^ - horizontal scrolling enabled (for alignment)
12776 # ^^FX004? - margins at columns 0 and 79
12777 # ^^F] - horizontal scrolling disabled
12778 # ^^O - primary character set
12779 # ^^FS00 - default character set (the keyboard native language)
12780 # - (should reset scrolling regions, but that glitches the screen)
12782 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
12783 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
12784 use=dgmode+color, use=d460-dg,
12786 # DASHER D555 terminal in ANSI mode.
12787 # Like a D411, but has an integrated phone.
12788 d555|Data General DASHER D555,
12790 d555-7b|Data General DASHER D555 in 7-bit mode,
12792 d555-w|Data General DASHER D555 in wide mode,
12794 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
12796 d555-dg|Data General DASHER D555 series in DG mode,
12799 # DASHER D577 terminal in ANSI mode.
12800 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
12801 d577|Data General DASHER D577,
12803 d577-7b|Data General DASHER D577 in 7-bit mode,
12805 d577-w|Data General DASHER D577 in wide mode,
12807 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
12810 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
12813 # DASHER D578 terminal.
12814 # Like a D577, but without compressed mode; like a D470C in this respect.
12816 # Initialization string 1 sets:
12818 # <0 - scrolling enabled
12819 # <1 - blink enabled
12820 # <2 - horizontal scrolling enabled (for alignment)
12821 # <4 - print characters regardless of attributes
12822 # \E[1;1;80w - margins at columns 1 and 80
12824 # 1 - print all characters even if protected
12825 # 6 - character protection disabled
12826 # <2 - horizontal scrolling disabled
12827 # - (should reset scrolling regions, but that glitches the screen)
12829 d578|Data General DASHER D578,
12830 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
12831 d578-7b|Data General DASHER D578 in 7-bit mode,
12832 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
12834 #### Datamedia (dm)
12836 # Datamedia was headquartered in Nashua, New Hampshire until it went
12837 # out of business in 1993, but the ID plates on the terminals referred
12838 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
12839 # manufacturer which threw out all information about the terminals.
12842 cs10|colorscan|Datamedia Color Scan 10,
12845 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
12846 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12847 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12848 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
12849 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12850 cs10-w|Datamedia Color Scan 10 with 132 columns,
12852 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
12854 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
12855 dm1520|dm1521|datamedia 1520,
12857 cols#80, it#8, lines#24,
12858 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
12859 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
12860 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
12862 # dm2500: this terminal has both <ich> and <smir>. Applications using
12863 # termcap/terminfo directly (rather than through ncurses) might be confused.
12864 dm2500|datamedia2500|datamedia 2500,
12867 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
12868 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
12869 dch1=\020\010\030\035$<10*>,
12870 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
12871 ich1=\020\034\030\035$<10*>,
12872 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
12873 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
12874 smdc=^P, smir=^P, smso=^N,
12875 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
12876 # also, has a meta-key.
12877 # From: <goldberger@su-csli.arpa>
12878 # (dmchat: ":MT:" changed to ":km:" -- esr)
12879 dmchat|dmchat version of datamedia 2500,
12881 dl1=\020\032\030\035$<2/>,
12882 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
12883 # (dm3025: ":MT:" changed to ":km:" -- esr)
12884 dm3025|datamedia 3025a,
12886 cols#80, it#8, lines#24,
12887 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12888 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
12889 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
12890 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
12891 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
12892 smir=\EP, smso=\EO1,
12893 dm3045|datamedia 3045a,
12894 OTbs, am, eo, km@, ul, xenl,
12895 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
12896 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
12897 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
12898 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
12900 # Datamedia DT80 soft switches:
12901 # 1 0=Jump 1=Smooth
12902 # Autorepeat 0=off 1=on
12903 # Screen 0=Dark 1=light
12904 # Cursor 0=u/l 1=block
12906 # 2 Margin Bell 0=off 1=on
12907 # Keyclick 0=off 1=on
12908 # Ansi/VT52 0=VT52 1=Ansi
12909 # Xon/Xoff 0=Off 1=On
12911 # 3 Shift3 0=Hash 1=UK Pound
12913 # Newline 0=Off 1=On
12914 # Interlace 0=Off 1=On
12916 # 4 Parity 0=Odd 1=Even
12917 # Parity 0=Off 1=On
12918 # Bits/Char 0=7 1=8
12919 # Power 0=60Hz 1=50Hz
12921 # 5 Line Interface 0=EIA 1=Loop
12922 # Aux Interface 0=EIA 1=Loop
12923 # Local Copy 0=Off 1=On
12926 # 6 Aux Parity 0=Odd 1=Even
12927 # Aux Parity 0=Off 1=On
12928 # Aux Bits/Char 0=7 1=8
12929 # CRT Saver 0=Off 1=On
12930 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
12931 dm80|dmdt80|dt80|datamedia dt80/1,
12932 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
12933 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12934 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
12935 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12937 # except in 132 column mode, where it needs a little padding.
12938 # This is still less padding than the vt100, and you can always turn on
12939 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
12941 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
12943 clear=\E[H\E[2J$<50/>, cud1=^J,
12944 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
12945 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
12946 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
12947 dt80-sas|Datamedia DT803/DTX for SAS usage,
12950 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
12951 bel=^G, clear=^L, cr=^M,
12952 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
12953 cub1=^H, cud1=\EB, cuf1=^\,
12954 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
12955 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
12956 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
12957 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
12958 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
12959 smso=\E$2\004, tbc=\E'0,
12961 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
12962 # These aren't end-all Excel termcaps; but do insert/delete char/line
12963 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
12964 # The naming convention has been bent somewhat, with the use of E? (where
12965 # E is for 'Excel') as # a name. This was done to distinguish the entries
12966 # from the other Datamedias in use here, and yet to associate a model of
12967 # the Excel terminals with the regular datamedia terminals that share
12968 # major characteristics.
12969 excel62|excel64|datamedia Excel 62,
12970 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
12971 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
12973 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
12974 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
12975 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
12977 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
12978 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
12979 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
12980 smir=\E[4h, use=dt80,
12984 # Falco Data Products
12985 # 440 Potrero Avenue
12986 # Sunnyvale, CA 940864-196
12987 # Vox: (800)-325-2648
12988 # Fax: (408)-745-7860
12989 # Net: techsup@charm.sys.falco.com
12991 # Current Falco models as of 1995 are generally ANSI-compatible and support
12992 # emulations of DEC VT-series, Wyse, and Televideo types.
12995 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
12996 # This terminal was released around 1983 and was discontinued long ago.
12997 # The standout and underline highlights are the same.
12998 falco|ts1|ts-1|falco ts-1,
13000 cols#80, it#8, lines#24,
13001 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13002 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13003 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13004 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13005 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13006 smir=\Eq, smso=\Eg1, smul=\Eg1,
13007 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13008 OTbs, am, da, db, mir, msgr, ul,
13009 cols#80, it#8, lines#24,
13010 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13011 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13012 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13013 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13014 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13015 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13016 smso=\Eg4, smul=\Eg1,
13017 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13018 ts100|ts100-sp|falco ts100-sp,
13019 am, mir, msgr, xenl, xon,
13020 cols#80, it#8, lines#24, vt#3,
13021 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13022 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13023 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13024 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13025 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13026 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13027 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13028 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13029 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13030 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13031 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13032 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13033 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13034 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13035 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13036 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13038 ts100-ctxt|falco ts-100 saving context,
13039 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13041 #### Florida Computer Graphics
13044 # Florida Computer Graphics Beacon System, using terminal emulator program
13045 # "host.com", as provided by FCG. This description is for an early release
13046 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13049 # From: David Bryant <cbosg!djb> 1/7/83
13050 beacon|FCG Beacon System,
13053 bel=\ESTART\r\E37\r\EEND\r$<1>,
13054 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13055 cub1=^H, cud1=^J, cuf1=\EV,
13056 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13057 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13058 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13059 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13060 rmul=\ESTART\r\E60\,0\r\EEND\r,
13061 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13062 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13063 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13064 smul=\ESTART\r\E60\,1\r\EEND\r,
13069 # The f1720a differences from ANSI: no auto margin, destructive
13070 # tabs, # of lines, funny highlighting and underlining
13071 f1720|f1720a|fluke 1720A,
13073 cols#80, lines#16, xmc#1,
13074 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13075 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13076 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13077 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13078 smso=\E[7m, smul=\E[4m,
13080 #### Liberty Electronics (Freedom)
13082 # Liberty Electronics
13083 # 48089 Fremont Blvd
13085 # Vox: (510)-623-6000
13086 # Fax: (510)-623-7021
13088 # From: <faletti@berkeley.edu>
13089 # (f100: added empty <acsc> to suppress a tic warning;
13090 # made this relative to adm+sgr -- note that <invis> isn't
13091 # known to work for f100 but does on the f110. --esr)
13092 f100|freedom|freedom100|freedom model 100,
13093 OTbs, am, bw, hs, mir, msgr, xon,
13095 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13096 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13097 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13098 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13099 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13100 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13101 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13102 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13103 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13104 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13105 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13106 f100-rv|freedom-rv|freedom 100 in reverse video,
13107 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13108 # The f110 and f200 have problems with vi(1). They use the ^V
13109 # code for the down cursor key. When kcud1 is defined in terminfo
13110 # as ^V, the Control Character Quoting capability (^V in insert mode)
13111 # is lost! It cannot be remapped in vi because it is necessary to enter
13112 # a ^V to to quote the ^V that is being remapped!!!
13114 # f110/f200 users will have to decide whether
13115 # to lose the down cursor key or the quoting capability. We will opt
13116 # initially for leaving the quoting capability out, since use of VI
13117 # is not generally applicable to most interactive applications
13118 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13119 f110|freedom110|Liberty Freedom 110,
13122 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13123 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13124 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13125 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13126 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13127 smso=\EG<, tsl=\Ef, use=f100,
13128 f110-14|Liberty Freedom 110 14inch,
13130 f110-w|Liberty Freedom 110 - 132 cols,
13131 cols#132, use=f110,
13132 f110-14w|Liberty Freedom 110 14in/132 cols,
13135 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13136 f200|freedom200|Liberty Freedom 200,
13137 OTbs, am, eslok, hs, mir, msgr, xon,
13138 cols#80, it#8, lines#24, wsl#80,
13139 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13140 clear=^Z, cnorm=\E.1, cr=^M,
13141 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13142 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13143 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13144 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13145 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13146 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13147 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13148 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13149 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13150 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13151 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13152 f200-w|Liberty Freedom 200 - 132 cols,
13153 cols#132, use=f200,
13154 # The f200 has the ability to reprogram the down cursor key. The key is
13155 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13156 # so powering the terminal off and on will not cause the change to be lost.
13157 f200vi|Liberty Freedom 200 for vi,
13158 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13159 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13160 cols#132, use=f200vi,
13164 # Graphon Corporation
13165 # 544 Division Street
13166 # Campbell, CA 95008
13167 # Vox: (408)-370-4080
13168 # Fax: (408)-370-5047
13169 # Net: troy@graphon.com (Troy Morrison)
13172 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13173 # including one odd hybrid that starts out life on power-up as a character
13174 # terminal, than can be switched to X graphics mode (driven over the serial
13175 # line) by an escape sequence. No info on this beast yet.
13176 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13177 go140|graphon go-140,
13179 cols#80, it#8, lines#24,
13180 clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
13181 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13182 ed=\E[J$<10/>, el=\E[K, ht=^I,
13183 if=/usr/share/tabset/vt100, il1=\E[L,
13184 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13185 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13186 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13187 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13188 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13189 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13190 go140w|graphon go-140 in 132 column mode,
13193 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13195 # Hacked up vt200 termcap to handle GO-225/VT220
13196 # From: <edm@nwnexus.WA.COM>
13197 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13198 go225|go-225|Graphon 225,
13199 OTbs, am, mir, xenl,
13200 cols#80, it#8, lines#25, vt#3,
13201 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13202 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13203 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13204 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13205 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13206 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13207 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13208 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13209 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13210 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13211 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13212 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13214 #### Harris (Beehive)
13216 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13217 # Their terminal group is ancient history now (1995) though the parent
13218 # company is still in business.
13221 # Beehive documentation is undated and marked Preliminary and has no figures
13222 # so we must have early Superbee2 (Model 600, according to phone conversation
13223 # with mfr.). It has proved reliable except for some missing padding
13224 # (notably after \EK and <nl> at bottom of screen).
13226 # The key idea is that AEP mode is poison for <cup> & that US's in
13227 # the local memory should be avoided like the plague. That means
13228 # that the 2048 character local buffer is used as 25 lines of 80
13229 # characters, period. No scrolling local memory, folks. It also
13230 # appears that we cannot use naked INS LINE feature since it uses
13231 # US. The sbi fakes <il1> with an 80-space insert that may be too
13232 # slow at low speeds; also spaces get converted to \040 which is
13233 # too long for some programs (not vi). DEL LINE is ok but slow.
13235 # The <nl> string is designed for last line of screen ONLY; cup to
13236 # 25th line corrects the motion inherent in scrolling to Page 1.
13238 # There is one understood bug. It is that the screen appears to
13239 # pop to a new (blank) page after a <nel>, or leave a half-line
13240 # ellipsis to a quad that is the extra 48 memory locations. The
13241 # data received is dumped into memory but not displayed. Not to
13242 # worry if <cup> is being used; the lines not displayed will be,
13243 # whenever the cursor is moved up there. Since <cup> is addressed
13244 # relative to MEMORY of window, nothing is lost; but beware of
13245 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13246 # therefore, is setenv MORE -c .
13248 # WARNING: Not all features tested.
13250 # Timings are assembled from 3 sources. Some timings may reflect
13251 # SB2/Model 300 that were used if more conservative.
13252 # Tested on a Model 600 at 1200 and 9600 bd.
13254 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13255 # placed on the keyboard and useless because of AEP, is made
13256 # into a backspace key. In use ESC must be pressed twice (to send)
13257 # and sending ^C must be prefixed by ESC to avoid that weird
13258 # transmit mode associated with ENTER key.
13260 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13261 # the screen, then it has dropped into ENTER mode; hit
13262 # RESET--ONLINE--!tset.
13264 # As delivered this machine has a FATAL feature that will throw
13265 # it into that strange transmit state (SPOW) if the space bar is
13266 # hit after a CR is received, but before receiving a LF (or a
13269 # The circuits MUST be modified to eliminate the SPOW latch.
13270 # This is done by strapping on chip A46 of the I/O board; cut
13271 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13272 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13273 # With this modification absurdly high timings on cr are
13276 # NOTE WELL that the rear panel switch should be set to CR/LF,
13279 sb1|beehive superbee,
13280 OTbs, am, bw, da, db, mir, ul, xsb,
13281 cols#80, lines#25, xmc#1,
13282 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
13283 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
13284 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
13285 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
13286 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
13287 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
13288 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
13289 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
13290 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
13291 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
13292 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
13293 smso=\E_1, smul=\E_0, tbc=\E3,
13294 sbi|superbee|beehive superbee at Indiana U.,
13296 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
13298 # Alternate (older) description of Superbee - f1=escape, f2=^C.
13299 # Note: there are at least 3 kinds of superbees in the world. The sb1
13300 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
13301 # The sb3 puts garbage on the bottom of the screen when you scroll with
13302 # the switch in the back set to CRLF instead of AEP. This description
13303 # is tested on the sb2 but should work on all with either switch setting.
13304 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
13305 # the other two if you want to try to hit that tiny escape key.
13306 # This description is tricky: being able to use cup depends on there being
13307 # 2048 bytes of memory and the hairy <nl> string.
13308 superbee-xsb|beehive super bee,
13310 cols#80, it#8, lines#25,
13311 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
13312 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
13313 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
13314 home=\EH, ht=^I, hts=\E1,
13315 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
13316 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
13317 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
13318 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
13319 # This loses on lines > 80 chars long, use at your own risk
13320 superbeeic|super bee with insert char,
13321 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
13322 sb2|sb3|fixed superbee,
13323 xsb@, use=superbee,
13325 #### Beehive Medical Electronics
13327 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
13328 # Regarding your question though; Beehive terminals weren't made by Harris.
13329 # They were made by Beehive Medical Electronics in Utah. They went out of
13330 # business in the early '80s.
13332 # (OK, then, I don't know why a couple of these say "harris beehive".)
13335 # Reports are that most of these Beehive entries (except superbee) have not
13336 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
13338 # (bee: <ich1> was empty, which is obviously bogus -- esr)
13339 beehive|bee|harris beehive,
13342 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13343 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13344 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
13345 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13346 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
13347 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
13348 smir=\EQ, smso=\EdP, smul=\Ed`,
13349 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
13350 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
13351 # look at those spaces in <rmso>/<smso>. Seems strange to me...
13352 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
13353 # really care, cook up one using ^F -- esr)
13354 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
13356 cols#80, it#8, lines#20,
13357 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
13358 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
13359 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
13360 beehive4|bh4|beehive 4,
13363 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
13364 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
13365 # There was an early Australian kit-built computer called a "Microbee".
13366 # It's not clear whether this is for one of those or for a relative
13368 microb|microbee|micro bee series,
13370 cols#80, it#8, lines#24,
13371 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13372 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13373 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
13374 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
13375 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
13376 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
13378 # 8675, 8686, and bee from Cyrus Rahman
13379 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
13380 ha8675|harris 8675,
13381 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
13382 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
13383 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
13384 kf8=\177, kf9=\Ee, use=bee,
13385 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
13387 ha8686|harris 8686,
13388 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
13389 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
13390 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
13391 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
13392 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
13397 # Hazeltine appears to be out of the terminal business as of 1995. These
13398 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
13399 # Harris. They have a hazeltine.com domain (but no web page there ) and can
13403 # 450 East Pulaski Road
13404 # Greenlawn, New York 11740
13406 # As late as 1993, manuals for the terminal product line could still be
13409 # TRW Customer Service Division
13412 # Fairfield, NJ 07007-2078
13414 # They're now (1998) a subsidiary of General Electric, operating under the
13415 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
13416 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
13419 # Since <cuf1> is blank, when you want to erase something you
13420 # are out of luck. You will have to do ^L's a lot to
13421 # redraw the screen. h1000 is untested. It doesn't work in
13422 # vi - this terminal is too dumb for even vi. (The code is
13423 # there but it isn't debugged for this case.)
13424 hz1000|hazeltine 1000,
13427 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
13429 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
13430 hz1420|hazeltine 1420,
13433 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
13434 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
13435 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
13437 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
13438 # freakout with out-of-range args and tn3270. No hz since it needs to
13440 hz1500|hazeltine 1500,
13443 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13444 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
13445 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
13446 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
13447 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
13448 # h1510 assumed to be in sane escape mode. Else use h1500.
13449 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
13450 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
13451 # removed incorrect and overridden ":do=^J:" -- esr)
13452 hz1510|hazeltine 1510,
13455 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
13456 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
13457 el=\E^O, il1=\E^Z, ind=^J,
13459 # The following switch settings are assumed for normal operation:
13460 # FULL CR U/L_CASE ESCAPE
13461 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
13462 # Other switches may be set for operator convenience or communication
13464 hz1520|Hazeltine 1520,
13465 OTbs, am, bw, msgr,
13467 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
13468 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13469 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
13470 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
13471 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
13472 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
13473 # This version works with the escape switch off
13474 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
13475 hz1520-noesc|hazeltine 1520,
13478 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13479 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
13480 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
13481 # Note: the h1552 appears to be the first Hazeltine terminal which
13482 # is not braindamaged. It has tildes and backprimes and everything!
13483 # Be sure the auto lf/cr switch is set to cr.
13484 hz1552|hazeltine 1552,
13486 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
13487 lf2=red, lf3=green, use=vt52,
13488 hz1552-rv|hazeltine 1552 reverse video,
13489 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
13490 # Note: h2000 won't work well because of a clash between upper case and ~'s.
13491 hz2000|hazeltine 2000,
13494 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
13495 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
13496 il1=~\032$<6>, ind=^J, pad=\177,
13497 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
13498 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
13499 # to work ok. There is one problem though if one types a lot of garbage
13500 # characters very fast vi seems not able to keep up and hangs while trying
13501 # to insert. That's in insert mode while trying to insert in the middle of
13502 # a line. It might be because the Esprit doesn't have insert char and delete
13503 # char as a built in function. Vi has to delete to end of line and then
13504 # redraw the rest of the line.
13505 esprit|Hazeltine Esprit I,
13508 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
13509 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13510 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
13511 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
13512 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
13513 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
13514 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
13515 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
13516 esprit-am|hazeltine esprit auto-margin,
13518 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
13519 # Vi it seems always wants to send a control J for "do" and it turned out
13520 # that the terminal would work somewhat if the auto LF/CR was turned off.
13521 # (hmod1: removed :dn=~^K: -- esr)
13522 hmod1|Hazeltine Modular 1,
13525 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13526 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
13527 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
13528 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
13530 # Hazeltine Executive 80 Model 30 (1554?)
13531 # from Will Martin <control@ALMSA-1.ARPA> via BRL
13532 # Like VT100, except for different "am" behavior.
13533 hazel|exec80|h80|he80|Hazeltine Executive 80,
13535 cols#80, it#8, lines#24, vt#3,
13536 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
13537 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13538 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
13539 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
13540 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
13541 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
13542 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13543 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
13544 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
13545 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
13546 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13547 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
13553 ibm327x|line mode IBM 3270 style,
13555 clear=^M^J, el=^M, home=^M,
13557 ibm3101|i3101|IBM 3101-10,
13560 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13561 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13562 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
13563 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
13564 ibm3151|IBM 3151 display,
13565 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
13566 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
13567 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
13568 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
13569 # removed kend, knp, kpp -TD
13570 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
13571 OTbs, am, mir, msgr,
13572 cols#80, it#8, lines#24,
13573 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
13574 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
13575 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13576 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
13577 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
13578 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
13579 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
13580 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
13581 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
13582 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
13583 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
13584 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
13585 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
13586 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
13587 rmso=\E4@, rmul=\E4@,
13588 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
13589 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
13591 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
13592 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
13593 ibm3162|IBM 3162 display,
13594 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
13595 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
13598 # This really should not use setab/setaf, but it is clear that the
13599 # original terminfo does not toggle red/blue colors as in setb/setf.
13600 ibm3164|i3164|IBM 3164,
13602 colors#8, pairs#64,
13603 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
13604 setab=\E4 %p1%{64}%+%c,
13605 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
13606 smcup=\E!9/N\E>B, use=ibm3161,
13608 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
13610 cols#80, it#8, lines#25,
13611 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13612 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13613 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13614 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13615 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13616 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
13617 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
13618 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
13619 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13620 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
13621 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
13622 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
13623 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
13624 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
13625 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
13626 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
13627 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
13628 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
13629 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13630 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
13631 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
13632 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
13633 rmso=\E[m, rmul=\E[m, rs2=\Ec,
13634 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
13635 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13637 ibmaed|IBM Experimental display,
13638 OTbs, am, eo, msgr,
13639 cols#80, it#8, lines#52,
13640 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
13641 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
13642 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
13643 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13644 rmso=\E0, sgr0=\E0, smso=\E0,
13645 ibm-apl|apl|IBM apl terminal simulator,
13646 lines#25, use=dm1520,
13647 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
13648 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
13649 ibmmono|IBM workstation monochrome,
13651 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
13652 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
13653 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
13654 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
13655 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
13656 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
13658 ibmega|IBM Enhanced Color Display,
13659 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13660 nel=^M^J, use=ibmmono,
13661 # This color scheme is assumed in some recent IBM terminal descriptions
13662 # (green on black, emulated on a 16-color terminal).
13663 ibm+color|IBM color definitions,
13664 colors#8, ncv#3, pairs#64,
13666 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
13667 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
13668 ibm+16color|IBM aixterm color definitions,
13669 colors#16, pairs#256,
13670 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
13671 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
13672 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13673 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13674 ibm5154|IBM 5154 Color display,
13675 colors#8, ncv@, pairs#64,
13676 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13678 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
13679 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
13681 ibmvga-c|IBM VGA display color termcap,
13682 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13683 nel=^M^J, use=ibmega-c,
13684 ibmvga|IBM VGA display,
13685 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13686 nel=^M^J, use=ibmega,
13687 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
13688 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
13690 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
13691 ibm6155|IBM 6155 Black & White display,
13692 blink@, bold@, use=ibm5151,
13693 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
13694 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
13696 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
13697 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
13699 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
13701 ibm6154|IBM 6154 Color displays,
13702 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13703 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13704 sgr0=\E[0;10m, use=ibm5154,
13705 ibm6153|IBM 6153 Black & White display,
13706 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13707 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13708 sgr0=\E[0;10m, use=ibm5151,
13709 ibm6153-90|IBM 6153 Black & White display,
13711 blink@, bold@, use=ibm5151,
13712 ibm6153-40|IBM 6153 Black & White display,
13713 cols#40, lines#12, use=ibm6153-90,
13714 ibm8512|ibm8513|IBM color VGA Terminal,
13716 cols#80, it#8, lines#25,
13717 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
13718 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
13719 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
13720 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
13721 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
13722 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
13723 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13724 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
13725 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
13726 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
13727 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
13728 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
13729 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13731 hft-c|HFT with Color,
13732 colors#8, pairs#64,
13733 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
13734 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
13735 use=ibm5151, use=ibm+color,
13736 hft-c-old|HFT with Color PC850,
13737 colors#8, pairs#64,
13738 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13740 hft-old|AIWS High Function Terminal,
13743 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13744 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13745 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
13746 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
13747 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13748 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
13749 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13750 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
13751 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
13752 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
13753 ibm-system1|system1|ibm system/1 computer,
13756 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
13757 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
13759 # lft-pc850 : IBM Low Function Terminal Device
13760 # lft "supports" underline, bold, and blink in the sense that the lft code
13761 # sets all the right bits. HOWEVER, depending upon the adapter, these
13762 # attributes may or may not be supported by the device driver.
13763 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
13765 cols#80, it#8, lines#25,
13766 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13767 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13768 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13769 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13770 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13771 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
13772 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
13773 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
13774 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
13775 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
13776 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
13777 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
13778 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
13779 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
13780 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
13781 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
13782 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
13783 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
13784 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13785 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
13786 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
13787 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
13788 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
13789 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13790 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13792 ibm5081|hft|IBM Megapel Color display,
13793 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
13794 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
13795 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
13798 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
13800 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
13802 ibm8514|IBM 8514/a color VGA display,
13804 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
13805 ibm8514-c|IBM 8514 color display with standout and underline,
13808 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
13809 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
13813 # AIX entries. IBM ships these with AIX 3.2.5.
13814 # -- added rc, sc based on manpage -TD
13815 # Note that we could use ibm+16color, but that is not how IBM defines this one.
13816 aixterm|IBM Aixterm Terminal Emulator,
13818 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13819 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
13820 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13821 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
13822 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
13824 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13825 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
13826 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13827 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
13828 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
13830 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
13831 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13832 tsl=\E[?%p1%dT, use=ibm6153,
13833 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
13834 acsc@, use=aixterm,
13835 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
13836 acsc@, use=aixterm-m,
13838 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
13839 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
13840 use=ibm+16color, use=aixterm,
13842 #### Infoton/General Terminal Corp.
13845 # gt100 sounds like something DEC would come out with. Let's hope they don't.
13846 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
13849 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13850 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
13851 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
13852 ind=^J, rmso=\Ea, smso=\Eb,
13856 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13857 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
13858 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
13859 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
13860 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
13864 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
13865 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
13866 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
13870 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
13871 ed=^K, ind=^J, ll=^H^\,
13873 # The ICL6402 was actually the Kokusai Display System 6402.
13874 # The 6404 was the KDS7372 (color version of the 6402).
13876 # ICL6404 control codes follow:
13879 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
13880 #ctrl-A set SOM position at cursor position
13886 #ctrl-L Cursor right
13887 #ctrl-M Carriage return
13888 #ctrl-N Disable xon/xoff to host
13889 #ctrl-O Enable xon/xoff to host
13890 #ctrl-R Enable bidirectional mode
13891 #ctrl-T Disable bidirectional mode
13892 #ctrl-V Cursor down
13893 #ctrl-Z Clear unprotected data to insert char
13894 #ctrl-^ Cursor home
13897 #ESC lead-in char for multiple character command
13899 #ESC space R execute power on sequence
13900 #ESC ! p1 p2 define scroll region:
13901 # p1 = scroll top line: 20h - 37h
13902 # p1 = scroll bottom line: 20h - 37h
13903 #ESC " unlock keyboard
13904 #ESC # lock keyboard
13905 #ESC $ Semi-graphics mode on
13906 #ESC % Semi-graphics mode off
13907 #ESC & protect mode on
13908 #ESC ' protect mode off
13909 #ESC ( write protect mode off (full intensity)
13910 #ESC ) write protect mode on (half intensity)
13912 #ESC * clear screen
13913 #ESC + clear unprotected data to insert char
13914 #ESC , clear unprotected data to half intensity spaces
13915 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
13916 # p1 = page number 0 - 3
13917 # p2 = row 20h - 7fh
13918 # p3 = column (lo) 20h - 7fh
13919 # p4 = column (hi) 20h - 21h (only 132 col)
13920 #ESC . p1 set cursor style:
13921 # p1 = 0 invisible cursor
13922 # p1 = 1 block blinking cursor
13923 # p1 = 2 block steady cursor
13924 # p1 = 3 underline blinking cursor
13925 # p1 = 4 underline steady cursor
13926 #ESC / transmit cursor location (page, row, column)
13927 #ESC 0 p1 p2 p3 p4 program edit key:
13928 # p1 = edit key code: '@'-'S', '`'-'s'
13929 # p2 p3 p4 = program data (3 bytes)
13932 #ESC 2 clear tab at cursor
13933 #ESC 3 clear all tabs
13934 #ESC 4 send unprotect line to cursor
13935 #ESC 5 send unprotect page to cursor
13936 #ESC 6 send line to cursor
13937 #ESC 7 send page to cursor
13938 #ESC 8 n set scroll mode:
13939 # n = 0 set jump scroll
13940 # n = 1 set smooth scroll
13941 #ESC 9 n control display:
13942 # n = 0 display off
13944 #ESC : clear unprotected data to null
13945 #ESC ; clear unprotected data to insert char
13948 #ESC = p1 p2 address cursor to row, column
13949 # p1 = row 20h - 7fh
13950 # p2 = column (lo) 20h - 7fh
13951 # p3 = column (hi) 20h - 21h (only 132 col)
13952 #ESC > keyclick off
13953 #ESC ? transmit cursor location (row, column)
13955 #ESC @ copy print mode on
13956 #ESC A copy print mode off
13957 #ESC B block mode on
13958 #ESC C block mode off (conversation mode)
13959 #ESC D F set full duplex
13960 #ESC D H set half duplex
13962 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
13963 # 0 = black, 1 = red, 2 = green, 3 = yellow
13964 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
13965 #ESC G n set serial field attribute (n = 30h - 3Fh)
13966 #ESC H n full graphics mode:
13967 # n = 0 exit full graphics mode
13968 # n = 1 enter full graphics mode
13971 #ESC K forward page
13973 #ESC L unformatted page print
13974 #ESC M L move window left (132 col mode only)
13975 #ESC M R move window right (132 col mode only)
13976 #ESC N set page edit (clear line edit)
13977 #ESC O set line edit (clear page edit)
13978 #ESC P formatted page print
13979 #ESC Q character insert
13981 #ESC S send message unprotected only
13982 #ESC T erase line to insert char
13983 #ESC U set monitor mode (see ESC X, ESC u)
13985 #ESC V n select video attribute mode:
13986 # n = 0 serial field attribute mode
13987 # n = 1 parallel character attribute mode
13988 #ESC V 2 n define line attribute:
13989 # n = 0 single width single height
13990 # n = 1 single width double height
13991 # n = 2 double width single height
13992 # n = 3 double width double height
13993 #ESC V 3 n select character font:
13994 # n = 0 system font
13995 # n = 1 user defined font
13996 #ESC V 4 n select screen mode:
13997 # n = 0 page screen mode
13998 # n = 1 virtual screen mode
13999 #ESC V 5 n control mouse mode:
14000 # n = 0 disable mouse
14001 # n = 1 enable sample mode
14002 # n = 2 send mouse information
14003 # n = 3 enable request mode
14004 #ESC W character delete
14005 #ESC X clear monitor mode (see ESC U, ESC u)
14006 #ESC Y erase page to insert char
14008 #ESC Z n send user/status line:
14009 # n = 0 send user line
14010 # n = 1 send status line
14011 # n = 2 send terminal ID
14012 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14016 # 3 = blink blank (= blank)
14018 # 5 = reverse blank
14019 # 6 = reverse blink
14020 # 7 = reverse blink blank (= reverse blank)
14022 # 9 = underline blank
14023 # : = underline blink
14024 # ; = underline blink blank
14025 # < = reverse underline
14026 # = = reverse underline blank
14027 # > = reverse underline blink
14028 # ? = reverse underline blink blank
14029 # p2, p3: f/grnd, b/grnd colour
14030 # (see ESC F for colours)
14031 # use ZZ for mono, eg.
14032 # ESC [ 0 Z Z for normal
14033 # ESC [ 4 Z Z for inverse etc.
14035 #ESC \ n set page size:
14036 # n = 1 24 lines/page
14037 # n = 2 48 lines/page
14038 # n = 3 72 lines/page
14039 # n = 4 96 lines/page
14040 #ESC ] n set Wordstar mode:
14041 # n = 0 normal (KDS7372) mode
14042 # n = 1 Wordstar mode
14044 #ESC b set foreground colour screen
14046 #ESC c n enter self-test mode:
14047 # n = 0 exit self test mode
14051 # n = 4 screen display test
14052 # n = 5 main/printer port test
14053 # n = 6 mouse port test
14054 # n = 7 graphics board test
14055 # n = 8 graphics memory test
14056 # n = 9 display all 'E'
14057 # n = : display all 'H'
14058 #ESC d set background colour screen
14060 #ESC e n program insert char (n = insert char)
14061 #ESC f text CR load user status line with 'text'
14063 #ESC g display user status line on 25th line
14064 #ESC h display system status line on 25th line
14066 #ESC j reverse linefeed
14067 #ESC k n duplex/local edit mode:
14068 # n = 0 duplex edit mode
14069 # n = 1 local edit mode
14070 #ESC l n select virtual screen:
14073 #ESC m save current config to NVRAM
14074 #ESC n p1 select display screen:
14079 #ESC o p1 p2 set characters/line and attribute:
14080 # p1 = 0 80 chars/line
14082 #ESC o p1 p2 set characters/line and attribute:
14083 # p1 = 0 80 chars/line
14084 # p1 = 1 132 chars/line
14085 # p2 = 0 single width single height
14086 # p2 = 1 single width double height
14087 # p2 = 2 double width single height
14088 # p2 = 3 double width double height
14090 #ESC q insert mode on
14091 #ESC r edit mode on
14092 #ESC s send message all
14093 #ESC t erase line to null
14094 #ESC u clear monitor mode (see ESC U, ESC X)
14095 #ESC v autopage mode on
14096 #ESC w autopage mode off
14097 #ESC x p1 p2 p3 define delimiter code...
14098 #ESC y erase page to null
14100 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14101 # p1 = starting row
14102 # p2 = starting column
14106 #ESC { p1 p2 p3 p4 configure main port
14107 # (baud, stop bits, parity, word length)
14109 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14110 # p1 = function key code:
14111 # '1' - ';' normal f1- f11
14112 # '<' - 'F' shifted f1 - f11
14113 # p2 = program mode:
14117 # Ctrl-Y = terminator
14118 # (use Ctrl-P to escape ^P, ^Y )
14120 #ESC } p1 p2 p3 p4 configure printer port
14121 # (baud, stop bits, parity, word length)
14122 #ESC ~ send system status
14124 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14126 # Entry is by esr going solely on above information and is UNTESTED.
14127 # This actually looks a lot like a Televideo 9xx.
14128 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14129 # to make color work without a test terminal. The <am> capability is a guess.
14130 # The initialization string sets conversation mode, blinking underline cursor,
14131 # full duplex, parallel attribute mode, display user status line, white
14132 # foreground, black background, normal highlight.
14134 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14137 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14139 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14140 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14141 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14142 hts=\E1, il1=\EE, invis=\E[1ZZ,
14143 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14144 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14145 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14146 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
14147 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14148 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14149 rs2=\Eo1, use=icl6404,
14151 #### Interactive Systems Corp
14153 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14154 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14155 # bought out by Sun.
14158 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14159 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14160 # ":le=^_:" later overridden -- esr)
14161 intext|Interactive Systems Corporation modified owl 1200,
14163 cols#80, it#8, lines#24, xmc#1,
14164 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14165 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14166 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14167 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14168 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14169 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14170 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14171 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14173 intext2|intextii|INTERACTIVE modified owl 1251,
14175 cols#80, lines#24, xmc#0,
14176 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
14177 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
14178 dl1=\E[M, ed=\E[J, el=\E[K,
14179 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14180 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14181 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14182 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14183 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14184 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14185 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14186 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14189 #### Kimtron (abm, kt)
14191 # Kimtron seems to be history, but as March 1998 these people are still
14192 # offering repair services for Kimtron equipment:
14194 # Com/Pair Monitor Service
14195 # 1105 N. Cliff Ave.
14196 # Sioux Falls, South Dakota 57103
14198 # WATS voice: 1-800/398-4946
14199 # POTS fax: +1 605/338-8709
14200 # POTS voice: +1 605/338-9650
14201 # Email: <compair@sd.cybernex.net>
14202 # Internet/Web: <http://www.com-pair.com>
14204 # Kimtron entries include (undocumented) codes for: enter dim mode,
14205 # enter bold mode, enter reverse mode, turn off all attributes.
14208 # Kimtron ABM 85 added by Dual Systems
14209 # (abm85: removed duplicated ":kd=^J:" -- esr)
14210 abm85|Kimtron ABM 85,
14211 OTbs, am, bw, msgr,
14212 cols#80, it#8, lines#24, xmc#1,
14213 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14214 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14215 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14216 if=/usr/share/tabset/stdcrt, il1=\EE,
14217 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14218 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14219 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14220 # Kimtron ABM 85H added by Dual Systems.
14221 # Some notes about the abm85h entries:
14222 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14223 # firmware revs prior to SP51
14224 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14225 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14226 # in some places and NOT software settable i.e., <is2> can't fix it)
14227 # 3) In 85h mode, the arrow keys and special functions transmit when
14228 # the terminal is in dup-edit, and work only locally in local-edit.
14229 # Vi won't swallow `del char' for instance, but <smcup> turns on
14230 # dup-edit anyway so that the arrow keys will work right. If the
14231 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14232 # <is2>. Note that 920E mode does not have software commands to toggle
14233 # between dup and local edit, so you get whatever was set last on the
14235 # 4) <flash> attribute is nice, but seems too slow to work correctly
14237 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14238 # are selected, the <xmc@> entry should be removed.
14239 # 6) auto new-line should be on (selectable from setup mode only)
14241 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14242 abm85h|Kimtron ABM 85H native mode,
14245 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14247 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14248 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14250 abm85e|Kimtron ABM 85H in 920E mode,
14252 bel=^G, dim=\E), flash@,
14253 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14254 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14255 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14258 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14259 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14260 # From: <malman@bbn-vax.arpa>
14261 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14262 kt7|kimtron model kt-7,
14264 cols#80, it#8, lines#24,
14265 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14266 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14267 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14268 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14269 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14270 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14271 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14272 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14273 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14274 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
14275 # other kt7 entry and the adjacent key capabilities). Removed EE which is
14276 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
14277 # but we can't figure out what.
14278 kt7ix|kimtron model kt-7 or 70 in IX mode,
14280 cols#80, it#8, lines#25,
14281 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
14282 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
14283 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14284 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
14285 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
14286 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
14287 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
14288 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14289 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14290 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
14291 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
14292 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
14294 #### Microdata/MDIS
14296 # This was a line of terminals made by McDonnell-Douglas Information Systems.
14297 # These entries come direct from MDIS documentation. I have edited them only
14298 # to move primary names of the form p[0-9] * to aliases, and to comment out
14299 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
14300 # also removed the change history; the last version indicates this is
14301 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
14304 # McDonnell Information Systems Terminal Family History
14305 # =========================================
14307 # Prism-1, Prism-2 and P99:
14308 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
14310 # Prism-4 and Prism-5:
14311 # Slightly less ancient range of Microdata terminals. Follow-on from
14312 # Prism-2, but with many enhancements. P5 has eight display pages.
14315 # A special terminal for use with library systems, primarily in Germany.
14316 # Limited numbers. Similar functionality to P5 (except attributes?).
14318 # Prism-7, Prism-8 and Prism-9:
14319 # More recent range of MDIS terminals, in which P7 and P8
14320 # replace the P4 & P5, with added functionality, and P9 is the flagship.
14321 # The P9 has two emulation modes - P8 and ANSI - and includes a
14322 # large number of the DEC VT220 control sequences. Both
14323 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
14325 # Prism-12 and Prism-14:
14326 # Latest range, functionally very similar to the P9. The P14 has a
14327 # black-on-white overscanning screen.
14329 # The terminfo definitions given here are:
14331 # p2 - Prism-2 (or Prism-1 or P99).
14333 # p4 - Prism-4 (and older P7s & P8s).
14334 # p5 - Prism-5 (or Prism-6).
14337 # p8 - Prism-8 (in national or multinational mode).
14338 # p8-w - 132 column version of p8.
14339 # p9 - Prism-9 in ANSI mode.
14340 # p9-w - 132 column version of p9.
14341 # p9-8 - Prism-9 in Prism-8 emulation mode.
14342 # p9-8-w - As p9-8, but with 132 columns.
14344 # p12 - Prism-12 in ANSI mode.
14345 # p12-w - 132 column version of p12.
14346 # p12-m - Prism-12 in MDC emulation mode.
14347 # p12-m-w - As p12-m, but with 132 columns.
14348 # p14 - Prism-14 in ANSI mode.
14349 # p14-w - 132 column version of p14.
14350 # p14-m - Prism-14 in MDC emulation mode.
14351 # p14-m-w - As p14-m, but with 132 columns.
14356 # Includes Prism-1 and basic P99 without SP or MP loaded.
14357 # The simplest form of Prism-type terminal.
14358 # Basic cursor movement and clearing operations only.
14359 # No video attributes.
14361 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14362 # value up, followed by backspace.
14364 prism2|MDC Prism-2,
14367 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14368 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14369 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
14370 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14371 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
14376 # Includes early versions of P7 & P8.
14377 # Basic family definition for most Prisms (except P2 and P9 ANSI).
14379 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14380 # value up, followed by backspace.
14381 # Cursor key definitions removed because they interfere with vi and csh keys.
14383 prism4|p4|P4|MDC Prism-4,
14384 am, bw, hs, mc5i, msgr,
14385 cols#80, lines#24, wsl#72, xmc#1,
14386 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
14387 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14388 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14389 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
14390 fsl=^]\345, home=^A,
14391 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14392 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
14393 rev=^CD, rmso=^C\s, rmul=^C\s,
14394 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
14395 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
14396 vpa=\013%p1%{32}%+%c,
14401 # Same definition as p4. Includes Prism-6 (not tested!).
14402 # Does not use any multi-page features.
14404 prism5|p5|P5|MDC Prism-5,
14410 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
14412 # Use p4 for very early models of P7.
14413 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14415 prism7|p7|P7|MDC Prism-7,
14416 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
14421 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
14422 # Supports national and multinational character sets.
14424 # Alternate char set operations only work in multinational mode.
14425 # Use p4 for very early models of P8.
14426 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14427 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14429 prism8|p8|P8|MDC Prism-8,
14430 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
14431 vpa=\E[%i%p1%dd, use=p4,
14433 # p8-w: Prism-8 in 132 column mode
14434 # --------------------------------
14436 # 'Wide' version of p8.
14438 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14440 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
14442 is2=\E[<12h\E[<14h, use=p8,
14444 # p9: Prism-9 in ANSI mode
14445 # -------------------------
14447 # The "flagship" model of this generation of terminals.
14448 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
14450 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
14451 # Fixes to deal with terminal firmware bugs:
14452 # . 'ri' uses insert-line since rev index doesn't always
14453 # . 'sgr0' has extra '0' since esc[m fails
14454 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
14455 # Not covered in the current definition:
14457 # . Programming Fn keys
14458 # . Graphic characters (defaults correctly to vt100)
14459 # . Padding values (sets xon)
14460 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14462 prism9|p9|P9|MDC Prism-9 in ANSII mode,
14463 am, bw, hs, mc5i, msgr, xenl, xon,
14464 cols#80, it#8, lines#24, vt#3, wsl#72,
14465 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
14466 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
14467 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14468 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14469 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14470 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
14471 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
14472 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
14473 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
14474 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
14475 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
14476 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
14477 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
14478 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
14479 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
14480 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
14481 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14482 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
14484 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
14485 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14486 tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
14488 # p9-w: Prism-9 in 132 column mode
14489 # --------------------------------
14491 # 'Wide' version of p9.
14493 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
14495 is2=\E[&p\E[<12l\E F\E[<14h,
14496 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
14498 # p9-8: Prism-9 in P8 mode
14499 # ------------------------
14501 # P9 terminal in P8 emulation mode.
14502 # Similar to p8 definition.
14503 # Insertion and deletion operations possible.
14505 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
14506 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14507 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
14509 # p9-8-w: Prism-9 in P8 and 132 column modes
14510 # ------------------------------------------
14512 # P9 terminal in P8 emulation mode and 132 column mode.
14514 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
14515 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14516 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
14518 # p12: Prism-12 in ANSI mode
14519 # ---------------------------
14521 # See p9 definition.
14523 prism12|p12|P12|MDC Prism-12 in ANSI mode,
14526 # p12-w: Prism-12 in 132 column mode
14527 # ----------------------------------
14529 # 'Wide' version of p12.
14531 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
14534 # p12-m: Prism-12 in MDC emulation mode
14535 # -------------------------------------
14537 # P12 terminal in MDC emulation mode.
14538 # Similar to p8 definition.
14539 # Insertion and deletion operations possible.
14541 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
14544 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
14545 # -------------------------------------------------------
14547 # P12 terminal in MDC emulation mode and 132 column mode.
14549 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
14552 # p14: Prism-14 in ANSII mode
14553 # ---------------------------
14555 # See p9 definition.
14557 prism14|p14|P14|MDC Prism-14 in ANSII mode,
14560 # p14-w: Prism-14 in 132 column mode
14561 # ----------------------------------
14563 # 'Wide' version of p14.
14565 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
14568 # p14-m: Prism-14 in MDC emulation mode
14569 # -------------------------------------
14571 # P14 terminal in MDC emulation mode.
14572 # Similar to p8 definition.
14573 # Insertion and deletion operations possible.
14575 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
14578 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
14579 # -------------------------------------------------------
14581 # P14 terminal in MDC emulation mode and 132 column mode.
14583 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
14586 # End of McDonnell Information Systems Prism definitions
14588 # These things were popular in the Pick database community at one time
14589 # From: George Land <georgeland@aol.com> 24 Sep 1996
14590 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
14592 cols#80, lines#24, ma#1, wsl#78, xmc#1,
14593 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
14594 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
14595 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
14596 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
14597 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
14598 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
14599 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14600 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
14601 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
14602 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
14605 #### Microterm (act, mime)
14607 # The mime1 entries refer to the Microterm Mime I or Mime II.
14608 # The default mime is assumed to be in enhanced act iv mode.
14611 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
14612 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
14613 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
14614 # since Sytek insists ^S means xoff.
14615 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
14616 act4|microterm|microterm act iv,
14619 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
14620 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
14621 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
14622 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
14623 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
14625 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
14626 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
14627 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
14628 act5|microterm5|microterm act v,
14629 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
14631 # Mimes using brightness for standout. Half bright is really dim unless
14632 # you turn up the brightness so far that lines show up on the screen.
14633 mime-fb|full bright mime1,
14634 is2=^S\E, rmso=^S, smso=^Y, use=mime,
14635 mime-hb|half bright mime1,
14636 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
14637 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
14638 # the more plausible ":do=^J:" -- esr)
14639 # uc was at one time disabled to get around a curses bug, be wary of it
14640 mime|mime1|mime2|mimei|mimeii|microterm mime1,
14642 cols#80, it#8, lines#24, vt#9,
14643 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
14644 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
14645 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
14646 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
14647 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
14648 # These termcaps (for mime2a) put the terminal in low intensity mode
14649 # since high intensity mode is so obnoxious.
14650 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
14653 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14654 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
14655 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
14656 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
14657 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
14658 smir=\EE, smso=\E\:, smul=\E6,
14659 # This is the preferred mode (but ^X can't be used as a kill character)
14660 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
14662 cols#80, it#8, lines#24,
14663 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14664 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
14665 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
14666 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
14667 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
14668 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
14669 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
14670 mime3a|mime1 emulating 3a,
14672 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
14673 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
14675 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
14677 # Wed Mar 9 18:53:21 1983
14678 # We run our terminals at 2400 baud, so there might be some timing problems at
14679 # higher speeds. The major improvements in this model are the terminal now
14680 # scrolls down and insert mode works without redrawing the rest of the line
14681 # to the right of the cursor. This is done with a bit of a kludge using the
14682 # exit graphics mode to get out of insert, but it does not appear to hurt
14683 # anything when using vi at least. If you have some users using act4s with
14684 # programs that use curses and graphics mode this could be a problem.
14685 mime314|mm314|mime 314,
14688 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
14689 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
14690 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
14691 # Microterm mime 340 from University of Wisconsin
14692 mm340|mime340|mime 340,
14694 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14695 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14696 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
14697 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
14698 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
14699 # This came from University of Wisconsin marked "astro termcap for jooss".
14700 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
14701 # also added <rmam>/<smam> based on the init string -- esr)
14702 mt4520-rv|micro-term 4520 reverse video,
14703 am, hs, msgr, xenl, xon,
14704 cols#80, it#8, lines#24, wsl#80,
14705 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
14706 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14707 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14708 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14709 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14710 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14711 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14712 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14713 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
14714 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14715 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
14716 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
14717 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
14718 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
14719 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
14720 tbc=\E[g, tsl=\E[25;1H,
14722 # Fri Aug 5 08:11:57 1983
14723 # This entry works for the ergo 4000 with the following setups:
14724 # ansi,wraparound,newline disabled, xon/xoff disabled in both
14727 # WARNING!!! There are multiple versions of ERGO 4000 microcode
14728 # Be advised that very early versions DO NOT WORK RIGHT !!
14729 # Microterm does have a ROM exchange program- use it or lose big
14730 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
14731 ergo4000|microterm ergo 4000,
14734 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
14735 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14736 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
14737 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
14738 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
14739 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14740 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
14741 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
14742 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
14743 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
14748 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
14749 # For what happened to that group, see the ADDS section.
14751 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
14754 # The following vendor-supplied termcaps were captured from the Boundless
14755 # Technologies site, 8 March 1998. I removed all-upper-case names that were
14756 # identical, except for case, to lower-case ones. I also uncommented the acsc
14759 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14760 # DEC vt200/300 with color capabilities added.
14761 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14762 colors#8, pairs#64,
14763 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14765 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14766 # DEC vt200/300 with color capabilities added.
14767 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14768 colors#8, pairs#64,
14769 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14770 use=ncr260vt300wan,
14771 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14772 # DEC vt200/300 with color capabilities added.
14773 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
14774 colors#8, pairs#64,
14775 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14777 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
14778 # DEC vt200/300 with color capabilities added.
14779 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
14780 colors#8, pairs#64,
14781 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14782 use=ncr260vt300wpp,
14783 # This definition for ViewPoint supports several attributes. This means
14784 # that it has magic cookies (extra spaces where the attributes begin).
14785 # Some applications do not function well with magic cookies. The System
14786 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
14787 # If supporting various attributes is not vital, 'xmc#1' and the extra
14788 # attributes can be removed.
14789 # Mapping to ASCII character set ('acsc' capability) can also be
14790 # restored if needed.
14791 ncr260vppp|NCR 2900_260 viewpoint,
14792 am, bw, hs, km, mc5i, mir, msgr, xon,
14793 cols#80, lines#24, nlab#32, xmc#1,
14794 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
14795 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
14796 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
14797 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
14798 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
14799 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
14800 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
14801 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14802 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
14803 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
14804 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
14805 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
14806 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
14807 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
14808 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
14809 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
14810 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
14811 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
14812 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
14813 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
14814 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
14815 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
14816 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14817 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
14818 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
14819 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
14821 cup=\Ea%i%p1%dR%p2%dC$<30>,
14822 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14823 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14825 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
14826 am, hs, mir, msgr, xenl, xon,
14827 cols#80, lines#24, nlab#32,
14828 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14829 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14830 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14831 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
14832 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14833 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14834 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14835 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14836 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14837 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
14838 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
14839 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
14840 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
14842 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14843 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14844 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
14845 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
14846 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
14847 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
14848 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14850 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14851 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
14852 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
14853 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
14854 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
14856 cup=\E[%i%p1%d;%p2%dH$<30>,
14857 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14858 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14860 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
14861 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14862 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14863 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14864 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
14865 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
14866 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14867 smkx=\E=, use=ncr260vt100an,
14868 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
14870 cup=\E[%i%p1%d;%p2%dH$<30>,
14871 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14872 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14874 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
14875 am, hs, mir, msgr, xenl, xon,
14876 cols#80, lines#24, nlab#32,
14877 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14878 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14879 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14880 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
14881 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14882 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14883 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14884 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14885 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14886 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
14887 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
14888 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
14889 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
14890 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14891 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14892 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
14893 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
14894 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
14895 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
14896 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
14897 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
14898 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
14899 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
14900 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
14901 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
14902 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
14903 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
14904 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
14905 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14907 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14908 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
14909 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14910 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
14912 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
14914 cup=\E[%i%p1%d;%p2%dH$<30>,
14915 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
14916 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
14918 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
14919 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14920 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14921 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14922 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
14924 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
14926 cup=\E[%i%p1%d;%p2%dH$<30>,
14927 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14928 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14930 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
14931 am, hs, mir, msgr, xenl, xon,
14932 cols#80, lines#24, nlab#32,
14933 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14934 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14935 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14936 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
14937 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14938 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14939 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14940 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14941 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14942 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
14943 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
14944 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
14945 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
14946 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14947 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14948 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
14949 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
14950 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
14951 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
14952 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
14953 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
14954 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
14955 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
14956 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14957 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
14958 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
14959 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
14961 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14963 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14964 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
14965 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14966 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
14968 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
14970 cup=\E[%i%p1%d;%p2%dH$<30>,
14971 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
14972 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
14974 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
14975 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14976 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14977 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14978 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
14980 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
14982 cup=\E[%i%p1%d;%p2%dH$<30>,
14983 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14984 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14986 # This terminfo file contains color capabilities for the Wyse325 emulation of
14987 # the NCR 2900/260C color terminal. Because of the structure of the command
14988 # (escape sequence) used to set color attributes, one of the fore/background
14989 # colors must be preset to a given value. I have set the background color to
14990 # black. The user can change this setup by altering the last section of the
14991 # 'setf' definition. The escape sequence to set color attributes is
14992 # ESC d y <foreground_color> <background_color> 1
14993 # In addition, the background color can be changed through the desk accessories.
14994 # The capablitiy 'op' sets colors to green on black (default combination).
14996 # NOTE: The NCR Unix System Administrator's Shell will not function properly
14997 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
14998 # capability and recompile if you wish to have it included.
15000 ncr260wy325pp|NCR 2900_260 wyse 325,
15001 am, bw, hs, km, mc5i, mir, msgr, xon,
15002 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15003 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15004 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15005 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15006 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15007 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15008 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15009 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15010 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15011 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15012 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15013 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15014 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15015 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15016 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15017 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15018 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15019 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15020 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15021 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15022 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15023 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15024 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15025 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15027 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15028 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15029 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15031 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15033 cup=\Ea%i%p1%dR%p2%dC$<30>,
15034 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15035 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15037 # This definition for Wyse 350 supports several attributes. This means
15038 # that it has magic cookies (extra spaces where the attributes begin).
15039 # Some applications do not function well with magic cookies. The System
15040 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15041 # If supporting various attributes is not vital, 'xmc#1' and the extra
15042 # attributes can be removed.
15043 # Mapping to ASCII character set ('acsc' capability) can also be
15044 # restored if needed.
15045 # In addition, color capabilities have been added to this file. The drawback,
15046 # however, is that the background color has to be black. The foreground colors
15047 # are numbered 0 through 15.
15049 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15050 # with the 'pairs' capability defined as below. If you wish to
15051 # have it included, Un-comment it and recompile (using 'tic').
15053 ncr260wy350pp|NCR 2900_260 wyse 350,
15054 am, bw, hs, km, mc5i, mir, msgr, xon,
15055 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15056 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15057 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15058 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15059 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15060 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15061 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15062 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15063 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15064 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15065 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15066 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15067 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15068 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15069 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15070 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15071 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15072 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15073 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15074 mc0=\EP$<10>, mc4=^T, mc5=^R,
15075 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15076 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15077 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15078 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15080 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15081 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15082 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15084 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15086 cup=\Ea%i%p1%dR%p2%dC$<30>,
15087 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15088 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15090 # This definition for Wyse 50+ supports several attributes. This means
15091 # that it has magic cookies (extra spaces where the attributes begin).
15092 # Some applications do not function well with magic cookies. The System
15093 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15094 # If supporting various attributes is not vital, 'xmc#1' and the extra
15095 # attributes can be removed.
15096 # Mapping to ASCII character set ('acsc' capability) can also be
15097 # restored if needed.
15098 # (ncr260wy50+pp: originally contained commented-out
15099 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15100 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15101 am, bw, hs, km, mc5i, mir, msgr, xon,
15102 cols#80, lines#24, nlab#32, xmc#1,
15103 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15104 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15105 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15106 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15107 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15108 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15109 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15111 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15112 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15113 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15114 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15115 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15116 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15117 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15118 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15119 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15120 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15121 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15122 mc0=\EP$<10>, mc4=^T, mc5=^R,
15123 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15124 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15125 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15126 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15127 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15128 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15129 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15131 cup=\Ea%i%p1%dR%p2%dC$<30>,
15132 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15133 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15135 ncr260wy60pp|NCR 2900_260 wyse 60,
15136 am, bw, hs, km, mc5i, mir, msgr, xon,
15137 cols#80, lines#24, nlab#32,
15138 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15139 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15140 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15141 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15142 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15143 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15144 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15146 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15147 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15148 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15149 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15150 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15151 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15152 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15153 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15154 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15155 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15156 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15157 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15158 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15159 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15160 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15161 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15162 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15163 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15165 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15167 cup=\Ea%i%p1%dR%p2%dC$<30>,
15168 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15169 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15171 ncr160vppp|NCR 2900_160 viewpoint,
15173 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15175 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15177 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15179 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15180 use=ncr260vt100wan,
15181 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15182 use=ncr260vt100wpp,
15183 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15185 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15187 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15188 use=ncr260vt200wan,
15189 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15190 use=ncr260vt200wpp,
15191 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15193 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15195 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15196 use=ncr260vt300wan,
15197 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15198 use=ncr260vt300wpp,
15199 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15201 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15202 use=ncr260wy50+wpp,
15203 ncr160wy60pp|NCR 2900_160 wyse 60,
15205 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15207 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15208 am, hs, mc5i, mir, msgr, xon,
15209 cols#80, it#8, lines#24, nlab#32,
15210 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15211 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15212 clear=\E[2J\E[1;1H$<300>, cr=^M,
15213 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15214 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15215 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15216 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15217 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15218 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15219 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15220 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15221 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15223 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15224 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15225 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15226 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15227 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15228 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15229 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15231 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15232 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15233 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15235 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15237 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15238 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15241 # Vendor-supplied NCR termcaps end here
15243 # NCR7900 DIP switches:
15247 # 5 - Parity (Odd/Even)
15248 # 6 - Don't Send or Do Send Spaces
15249 # 7 - Parity Enable
15250 # 8 - Stop Bits (One/Two)
15253 # 1 - Upper/Lower Shift
15254 # 2 - Typewriter Shift
15255 # 3 - Half Duplex / Full Duplex
15256 # 4 - Light/Dark Background
15257 # 5-6 - Carriage Return Without / With Line Feed
15258 # 7 - Extended Mode
15259 # 8 - Suppress Keyboard Display
15262 # 1 - End of line entry disabled/enabled
15263 # 2 - Conversational mode / (Local?) Mode
15264 # 3 - Control characters displayed / not displayed
15265 # 4 - (2-wire?) / 4-wire communications
15266 # 5 - RTS on and off for each character
15267 # 6 - (50Hz?) / 60 Hz
15268 # 7 - Exit after level zero diagnostics
15269 # 8 - RS-232 interface
15272 # 1 - Reverse Channel (yes / no)
15273 # 2 - Manual answer (no / yes)
15274 # 3-4 - Cursor appearance
15275 # 5 - Communication Rate
15276 # 6 - Enable / Disable EXT turnoff
15277 # 7 - Enable / Disable CR turnoff
15278 # 8 - Enable / Disable backspace
15280 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
15281 # reverse, blink, dim, and underline) the appropriate number of bits (by
15282 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
15283 # '@' is (effectively) "or"ed with each attribute to generate the proper third
15284 # character in the <ESC>0 sequence. The <sgr> string implements the following
15287 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
15288 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
15290 # Where: P1 <==> Standout attribute parameter
15291 # P2 <==> Underline attribute parameter
15292 # P3 <==> Reverse attribute parameter
15293 # P4 <==> Blink attribute parameter
15294 # P5 <==> Dim attribute parameter
15295 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
15296 ncr7900i|ncr7900|ncr 7900 model 1,
15298 cols#80, lines#24, xmc#1,
15299 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15300 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
15301 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
15302 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
15304 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
15305 sgr0=\E0@, smso=\E0Q, smul=\E0`,
15306 ncr7900iv|ncr 7900 model 4,
15309 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
15310 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
15311 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
15312 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
15313 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15314 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
15315 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
15316 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
15317 # The user can enter a CTRL-B to get out of this locked state.
15318 # In <hpa>, we want to output the character given by the formula:
15319 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
15320 ncr7901|ncr 7901 model,
15323 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
15324 cub1=^H, cud1=^J, cuf1=^F,
15325 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
15327 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
15328 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
15329 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
15330 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
15331 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
15332 vpa=\013%p1%{64}%+%c,
15334 # Newbury Data Recording Limited (Newbury Data)
15336 # Have been manufacturing and reselling various peripherals for a long time
15337 # They don't make terminals anymore, but are still in business (in 2007).
15338 # Their e-mail address is at ndsales@newburydata.co.uk
15339 # and their post address is:
15341 # Newbury Data Recording Ltd,
15342 # Premier Park, Road One,
15343 # Winsford, Cheshire, CW7 3PT
15345 # Their technical support is still good, they sent me for free a printed copy
15346 # of the 9500 user manual and I got it just 1 week after I first contacted them
15350 # Manufactured in the early/mid eighties, behaves almost the same as a
15351 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
15352 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
15353 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
15354 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
15355 # recognized: if you type in "ESC !", the next (third) character is not
15356 # echoed, showing that the terminal was actually waiting for a parameter!
15357 ndr9500|nd9500|Newbury Data 9500,
15358 am, bw, hs, mc5i, mir, msgr, ul, xon,
15359 cols#80, lines#24, wsl#79,
15360 acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
15361 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
15362 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15363 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
15364 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
15365 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
15366 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
15367 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
15368 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15369 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
15370 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
15371 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15372 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15373 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
15374 pfloc=\E|%{48}%p1%+%c2%p2\031,
15375 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
15376 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
15377 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
15378 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
15379 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
15381 ndr9500-nl|NDR 9500 with no status line,
15384 dsl@, fsl@, tsl@, use=ndr9500,
15386 ndr9500-25|NDR 9500 with 25th line enabled,
15387 lines#25, use=ndr9500,
15389 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
15390 lines#25, use=ndr9500-nl,
15392 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
15395 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
15396 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
15397 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
15399 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
15400 lines#25, use=ndr9500-mc,
15402 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
15405 dsl@, fsl@, tsl@, use=ndr9500-mc,
15407 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
15408 lines#25, use=ndr9500-mc-nl,
15410 #### Perkin-Elmer (Owl)
15412 # These are official terminfo entries from within Perkin-Elmer.
15415 bantam|pe550|pe6100|perkin elmer 550,
15418 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15419 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15420 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
15421 fox|pe1100|perkin elmer 1100,
15424 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15425 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15426 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
15427 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
15428 owl|pe1200|perkin elmer 1200,
15431 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15432 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15433 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15434 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15435 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
15436 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15437 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15438 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
15439 pe1251|pe6300|pe6312|perkin elmer 1251,
15441 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
15442 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
15443 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15444 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
15445 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
15446 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
15447 # (pe7000m: this had
15448 # rmul=\E!\0, smul=\E!\040,
15449 # which is probably wrong, it collides with kf0
15450 pe7000m|perkin elmer 7000 series monochrome monitor,
15453 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
15454 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15455 ed=\EJ, el=\EI, home=\EH, ind=^J,
15456 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
15457 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
15458 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
15459 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
15461 pe7000c|perkin elmer 7000 series colour monitor,
15462 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
15463 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
15467 # Sperry Univac has merged with Burroughs to form Unisys.
15470 # This entry is for the Sperry UTS30 terminal running the TTY
15471 # utility under control of CP/M Plus 1R1. The functionality
15472 # provided is comparable to the DEC vt100.
15473 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
15474 uts30|sperry uts30 with cp/m@1R1,
15476 cols#80, lines#24, wsl#40,
15477 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15478 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
15479 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
15480 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
15481 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
15482 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
15483 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
15484 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
15485 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
15486 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
15487 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
15488 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
15489 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15490 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
15491 smul=\E[4m, tsl=\E], uc=\EPB,
15495 # Tandem builds these things for use with its line of fault-tolerant
15496 # transaction-processing computers. They aren't generally available
15497 # on the merchant market, and so are fairly uncommon.
15500 tandem6510|adm3a repackaged by Tandem,
15503 # A funny series of terminal that TANDEM uses. The actual model numbers
15504 # have a fourth digit after 653 that designates minor variants. These are
15505 # natively block-mode and rather ugly, but they have a character mode which
15506 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
15507 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
15508 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
15509 tandem653|t653x|Tandem 653x multipage terminal,
15510 OTbs, am, da, db, hs,
15511 cols#80, lines#24, wsl#64, xmc#1,
15512 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
15513 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
15514 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
15515 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
15517 #### Tandy/Radio Shack
15519 # Tandy has a line of VDTs distinct from its microcomputers.
15522 dmterm|deskmate terminal,
15525 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
15526 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15527 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
15528 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
15529 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
15530 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
15531 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
15532 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
15534 dt100|dt-100|Tandy DT-100 terminal,
15536 cols#80, lines#24, xmc#1,
15537 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15538 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15539 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
15540 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
15541 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
15542 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
15543 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
15544 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
15545 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
15546 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
15547 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
15548 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
15549 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
15550 cols#132, use=dt100,
15551 dt110|Tandy DT-110 emulating ansi,
15554 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15555 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15556 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
15557 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
15558 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
15559 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
15560 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
15561 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
15562 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
15563 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
15564 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
15565 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15566 smacs=^N, smso=\E[7m, smul=\E[4m,
15567 pt210|TRS-80 PT-210 printing terminal,
15570 bel=^G, cr=^M, cud1=^J, ind=^J,
15572 #### Tektronix (tek)
15574 # Tektronix tubes are graphics terminals. Most of them use modified
15575 # oscilloscope technology incorporating a long-persistence green phosphor,
15576 # and support vector graphics on a main screen with an attached "dialogue
15577 # area" for interactive text.
15580 tek|tek4012|tektronix 4012,
15583 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
15584 ff=\014$<1000>, is2=\E^O,
15585 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15586 tek4013|tektronix 4013,
15587 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
15588 tek4014|tektronix 4014,
15590 is2=\E\017\E9, use=tek4012,
15591 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15592 tek4015|tektronix 4015,
15593 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
15594 tek4014-sm|tektronix 4014 in small font,
15595 cols#121, lines#58,
15596 is2=\E\017\E\:, use=tek4014,
15597 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15598 tek4015-sm|tektronix 4015 in small font,
15599 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
15600 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
15602 # You need to have "stty nl2" in effect. Some versions of tset(1) know
15603 # how to set it for you.
15605 # It's got the Magic Cookie problem around stand-out mode. If you can't
15606 # live with Magic Cookie, remove the :so: and :se: fields and do without
15607 # reverse video. If you like reverse video stand-out mode but don't want
15608 # it to flash, change the letter 'H' to 'P' in the :so: field.
15609 tek4023|tektronix 4023,
15611 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
15612 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
15613 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
15614 rmso=^_@, smso=^_P,
15615 # It is recommended that you run the 4025 at 4800 baud or less;
15616 # various bugs in the terminal appear at 9600. It wedges at the
15617 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
15618 # on keyboard don't work. You have to hit BREAK twice to get
15619 # one break at any speed - this is a documented feature.
15620 # Can't use cursor motion because it's memory relative, and
15621 # because it only works in the workspace, not the monitor.
15622 # Same for home. Likewise, standout only works in the workspace.
15624 # <el> was commented out since vi and rogue seem to work better
15625 # simulating it with lots of spaces!
15627 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
15628 # and didn't seem necessary.
15630 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
15632 cols#80, it#8, lines#34, lm#0,
15633 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
15634 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
15635 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
15636 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
15637 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
15638 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
15639 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
15641 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15642 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
15643 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
15644 tek4025-17|tek 4025 17 line window,
15645 lines#17, use=tek4025,
15646 tek4025-17-ws|tek 4025 17 line window in workspace,
15647 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
15648 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
15649 smso=\037att e\r, use=tek4025-17,
15650 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
15651 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
15652 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15654 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
15655 # The following status modes are assumed for normal operation (replace the
15656 # initial "!" by whatever the current command character is):
15657 # !COM 29 # NOTE: changes command character to GS (^])
15663 # ^]STO 9 17 25 33 41 49 57 65 73
15664 # Other modes may be set according to communication requirements.
15665 # If the command character is inadvertently changed, termcap can't restore it.
15666 # Insert-character cannot be made to work on both top and bottom rows.
15667 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
15668 # There also seems to be a problem with vertical motion, perhaps involving
15669 # delete/insert-line, following a typed carriage return. This terminal sucks.
15670 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15671 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
15672 # work any more. -- esr)
15673 tek4025a|Tektronix 4025A,
15674 OTbs, OTpt, am, bw, da, db, xon,
15675 cols#80, it#8, lines#34,
15676 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
15677 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
15678 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
15679 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
15680 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
15681 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
15682 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
15683 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
15685 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
15686 # Here's the command file that I use to get rogue to work on the 4025.
15687 # It should work with any program using the old curses (e.g. it better
15688 # not try to scroll, or cursor addressing won't work. Also, you can't
15690 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
15691 tek4025-cr|tek 4025 for curses and rogue,
15693 cols#80, it#8, lines#33,
15694 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
15695 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
15696 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15697 rmcup=\037wor 0, smcup=\037wor 33h,
15698 # next two lines commented out since curses only allows 128 chars, sigh.
15699 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
15700 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
15701 tek4025ex|4025ex|4027ex|tek 4025 w/!,
15702 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
15703 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15704 tek4105|tektronix 4105,
15705 OTbs, am, mir, msgr, ul, xenl, xt,
15706 cols#79, it#8, lines#29,
15707 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
15708 clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
15709 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
15710 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15711 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
15712 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
15713 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
15714 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
15715 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
15716 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
15717 smul=\E[=5;<2m, tbc=\E[1g,
15719 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
15720 tek4105-30|4015 emulating 30 line vt100,
15721 am, mir, msgr, xenl, xon,
15722 cols#80, it#8, lines#30, vt#3,
15723 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15724 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15725 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15726 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15727 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15728 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15729 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
15730 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
15731 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
15732 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15733 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15734 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15735 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
15736 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15737 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15740 # Tektronix 4105 from BRL
15741 # The following setup modes are assumed for normal operation:
15742 # CODE ansi CRLF no DABUFFER 141
15743 # DAENABLE yes DALINES 30 DAMODE replace
15744 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
15745 # FLAGGING input INSERTREPLACE replace LFCR no
15746 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
15747 # SELECTCHARSET G1 0 TABS -2
15748 # Other setup modes may be set for operator convenience or communication
15749 # requirements; I recommend
15750 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15751 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15752 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15753 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
15754 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15755 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
15757 # and factory color maps. After setting these modes, save them with NVSAVE. No
15758 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15759 # "IC" cannot be used in combination with "im" & "ei".
15760 # "tek4105a" is just a guess:
15761 tek4105a|Tektronix 4105,
15762 OTbs, OTpt, msgr, xon,
15763 OTkn#8, cols#80, it#8, lines#30, vt#3,
15764 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15765 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15766 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15767 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15768 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15769 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15770 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15771 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15772 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15773 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15774 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15775 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15776 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15777 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15778 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15779 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15780 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15781 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15784 # Tektronix 4106/4107/4109 from BRL
15785 # The following setup modes are assumed for normal operation:
15786 # CODE ansi COLUMNMODE 80 CRLF no
15787 # DABUFFER 141 DAENABLE yes DALINES 32
15788 # DAMODE replace DAVISIBILITY yes ECHO no
15789 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
15790 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
15791 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
15793 # Other setup modes may be set for operator convenience or communication
15794 # requirements; I recommend
15795 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15796 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15797 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15798 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
15799 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15800 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
15802 # and factory color maps. After setting these modes, save them with NVSAVE. No
15803 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15804 # "IC" cannot be used in combination with "im" & "ei".
15805 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
15807 cols#80, it#8, lines#32, vt#3,
15808 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15809 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15810 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15811 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15812 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15813 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15814 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15815 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15816 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15817 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15818 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15819 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15820 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15821 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15822 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15823 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15824 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15825 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
15827 tek4107|tek4109|tektronix terminals 4107 4109,
15828 OTbs, am, mir, msgr, ul, xenl, xt,
15829 cols#79, it#8, lines#29,
15830 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
15831 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
15832 cub1=^H, cud1=^J, cuf1=\EC,
15833 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
15834 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
15835 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15836 rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
15837 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
15838 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
15839 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
15840 smul=\E%!1\E[4m$<2>\E%!0,
15841 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
15842 # see the note attached to tek4207.
15843 tek4207-s|Tektronix 4207 with sysline but no memory,
15845 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
15846 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
15847 is2=\E7\E[?6l\E[2K\E[?6h\E8,
15848 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
15850 # The 4110 series may be a wonderful graphics series, but they make the 4025
15851 # look good for screen editing. In the dialog area, you can't move the cursor
15852 # off the bottom line. Out of the dialog area, ^K moves it up, but there
15853 # is no way to scroll.
15855 # Note that there is a floppy for free from Tek that makes the
15856 # 4112 emulate the vt52 (use the vt52 termcap). There is also
15857 # an expected enhancement that will use ANSI standard sequences.
15859 # 4112 in non-dialog area pretending to scroll. It really wraps
15860 # but vi is said to work (more or less) in this mode.
15862 # 'vi' works reasonably well with this entry.
15864 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
15867 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
15868 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
15869 # The 4112 with the ANSI compatibility enhancement
15870 tek4112|tek4114|tektronix 4110 series,
15873 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
15874 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
15875 ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
15876 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
15877 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15878 tek4112-nd|4112 not in dialog area,
15880 cuu1=^K, use=tek4112,
15881 tek4112-5|4112 in 5 line dialog area,
15882 lines#5, use=tek4112,
15883 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
15884 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
15885 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
15886 # previously \0410 and \0411 sequences...I don't *think* they were supposed
15887 # to be 4-digit octal -- esr)
15888 tek4113|tektronix 4113 color graphics with 5 line dialog area,
15891 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
15892 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
15893 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
15894 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
15896 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
15897 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
15898 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
15899 # :vb: needs enough delay to let you see the background color being toggled.
15900 tek4113-nd|tektronix 4113 color graphics with no dialog area,
15902 cols#80, it#8, lines#34,
15903 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
15905 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
15906 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
15907 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
15908 # This entry is from Tek. Inc. (Brian Biehl)
15909 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
15910 otek4115|Tektronix 4115,
15911 OTbs, am, da, db, eo,
15912 cols#80, it#8, lines#34,
15913 cbt=\E[Z, clear=\E[H\E[2J,
15914 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
15915 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15916 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
15917 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
15919 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
15920 kbs=^H, ri=\EM, rmam=\E[?7l,
15921 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
15922 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
15923 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
15925 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
15928 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
15929 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15930 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15931 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
15932 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
15933 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
15934 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
15935 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
15936 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
15937 rmso=\E[m, rmul=\E[m,
15938 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
15939 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
15940 vpa=\E[%p1%{1}%+%dd,
15941 # The tek4125 emulates a vt100 incorrectly - the scrolling region
15942 # command is ignored. The following entry replaces <csr> with the needed
15943 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
15944 # chokes on; and adds a lot of initialization for the tek dialog area.
15945 # Note that this entry uses all 34 lines and sets the cursor color to green.
15946 # Steve Jacobson 8/85
15947 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
15948 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
15949 tek4125|tektronix 4125,
15951 csr@, dl1=\E[1M, il1=\E[1L,
15952 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15953 rc@, sc@, smkx=\E=, use=vt100,
15955 # From: <jcoker@ucbic>
15956 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
15957 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
15958 # note that if jcoker wasn't confused you may be able to use this one.
15959 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
15960 tek4207|Tektronix 4207 graphics terminal with memory,
15961 am, bw, mir, msgr, ul, xenl,
15962 cols#80, it#8, lines#32,
15963 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
15964 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15965 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
15966 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
15967 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
15968 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
15969 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
15970 rev=\E[7m, ri=\E[T,
15971 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
15972 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
15973 smul=\E[4m, tbc=\E[1g,
15975 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
15976 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
15977 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
15978 tek4404|tektronix 4404,
15980 cols#80, it#8, lines#32,
15981 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
15982 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
15983 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
15984 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
15985 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
15986 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
15987 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
15988 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
15989 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
15990 # Some unknown person wrote:
15991 # I added the is string - straight Unix has ESC ; in the login
15992 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
15993 # mode). The is string here cleans up a few things (but not
15995 ct8500|tektronix ct8500,
15998 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
15999 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16000 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16001 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16002 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16004 # Tektronix 4205 terminal.
16006 # am is not defined because the wrap around occurs not when the char.
16007 # is placed in the 80'th column, but when we are attempting to type
16008 # the 81'st character on the line. (esr: hmm, this is like the vt100
16009 # version of xenl, perhaps am + xenl would work!)
16011 # Bold, dim, and standout are simulated by colors and thus not allowed
16012 # with colors. The tektronix color table is mapped into the RGB color
16013 # table by setf/setb. All colors are reset to factory specifications by oc.
16014 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16015 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16016 # interval then maps into pre-defined value.
16017 tek4205|tektronix 4205,
16019 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16020 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16021 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16022 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16023 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16024 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16025 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
16026 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
16027 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
16028 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16029 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16030 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16031 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16033 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16034 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16035 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16036 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16037 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16038 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16039 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16040 smul=\E[4m, tbc=\E[1g,
16042 #### Teletype (tty)
16044 # These are the hardcopy Teletypes from before AT&T bought the company,
16045 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16046 # pulpy yellow roll paper. If you remember these you go back a ways.
16047 # Teletype-branded VDTs are listed in the AT&T section.
16049 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16050 # other programs still default to emitting codes for the Model 37.
16053 tty33|tty35|model 33 or 35 teletype,
16056 bel=^G, cr=^M, cud1=^J, ind=^J,
16057 tty37|model 37 teletype,
16059 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16062 # There are known to be at least three flavors of the tty40, all seem more
16063 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16064 # awful braindamage, such as printing a visible newline indicator after each
16065 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16066 # braindamaged but has hope and is described here. The 40-4 is a 3270
16067 # lookalike and beyond hope. The terminal has visible bell but I don't know
16068 # it - it's null here to prevent it from showing the BL character.
16069 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16070 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16071 # to get crlf, even if <cr> is not ^M.)
16072 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16073 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16076 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16077 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16078 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16079 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16080 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16081 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16082 tty43|model 43 teletype,
16083 OTbs, am, hc, os, xon,
16085 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16090 # You can add <is2=\E<> to put this 40-column mode, though I can't
16091 # for the life of me think why anyone would want to.
16092 scanset|sc410|sc415|Tymshare Scan Set,
16095 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16096 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16097 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16098 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16099 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16101 #### Volker-Craig (vc)
16103 # If you saw a Byte Magazine cover with a terminal on it during the early
16104 # 1980s, it was probably one of these. Carl Helmers liked them because
16105 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16106 # to program one...)
16109 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16110 # every other linefeed.
16111 vc303|vc103|vc203|volker-craig 303,
16114 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16115 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16116 kcuu1=^N, ll=\017$<1>W,
16117 vc303a|vc403a|volker-craig 303a,
16118 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16119 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16120 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16121 vc404|volker-craig 404,
16124 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16125 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16126 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16127 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16128 vc404-s|volker-craig 404 w/standout mode,
16129 cud1=^J, rmso=^O, smso=^N, use=vc404,
16130 # From: <wolfgang@cs.sfu.ca>
16131 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16132 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16135 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16136 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16137 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16138 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16139 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16140 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16141 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16142 rmso=\E^_, smso=\E^Y,
16143 vc415|volker-craig 415,
16144 clear=^L, use=vc404,
16146 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16149 #### IBM PC and clones
16152 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16153 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16154 # doesn't support scrolling regions, ignores add line commands, and ignores
16155 # delete line commands. Consequently, the resulting behavior looks like a
16156 # crude adm3a-type terminal.
16157 # Steve Jacobson 8/85
16158 pcplot|pc-plot terminal emulation program,
16160 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16161 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16162 # I've found that my KayPro II, running MDM730, continues to emulate an
16163 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16164 # system the following termcap entry works well:
16165 # I have noticed a couple of minor glitches, but nothing I can't work
16166 # around. (I added two capabilities from the BRL entry -- esr)
16167 kaypro|kaypro2|kaypro II,
16170 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16171 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16172 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16174 # From IBM, Thu May 5 19:35:27 1983
16175 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16176 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16179 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16180 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16182 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16183 OTbs, am, bw, eo, hs, km, msgr, ul,
16184 cols#80, it#8, lines#24,
16185 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16186 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16187 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16188 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16189 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16190 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16191 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16192 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16193 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16194 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16195 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16196 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16197 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16198 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
16199 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16203 # Apple II firmware console first, then various 80-column cards and
16204 # terminal emulators. For two cents I'd toss all these in the UFO file
16205 # along with the 40-column apple entries.
16208 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16209 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16210 # function of TIC, not the firmware.
16211 # The clear key on a IIgs will do something like clear-screen,
16212 # depending on what you're in.
16213 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16214 OTbs, am, bw, eo, msgr,
16215 cols#80, it#8, lines#24,
16216 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16217 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16218 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16219 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16221 # Apple //e with 80-column card, entry from BRL
16222 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16223 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16224 # Auto-wrap does not work right due to newline scrolling delay, which also
16225 # requires that you set "stty cr2".
16226 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16227 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16228 # using a terminal emulation program instead of the built-in firmware.
16232 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16233 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16234 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16235 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16237 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16238 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16239 apple2e-p|Apple //e via Pascal,
16240 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16241 kcud1=^J, use=apple2e,
16242 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16243 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16244 apple-ae|ASCII Express,
16245 OTbs, am, bw, msgr, nxon, xon,
16246 cols#80, it#8, lines#24,
16247 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16248 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16249 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16250 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16252 appleII|apple ii plus,
16254 cols#80, it#8, lines#24,
16255 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16256 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16257 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16258 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16260 # Originally by Gary Ford 21NOV83
16261 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16262 apple-80|apple II with smarterm 80 col,
16265 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
16266 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
16267 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
16268 apple-soroc|apple emulating soroc 120,
16271 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16272 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
16273 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16274 # From Peter Harrison, Computer Graphics Lab, San Francisco
16275 # ucbvax!ucsfmis!harrison .....uucp
16276 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
16277 # "These two work. If you don't have the inverse video chip for the
16278 # Apple with videx then remove the :so: and :se: fields."
16279 # (apple-videx: this used to be called DaleApple -- esr)
16280 apple-videx|Apple with videx videoterm 80 column board with inverse video,
16282 cols#80, it#8, lines#24,
16283 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
16284 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16285 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
16286 rmso=^Z2, sgr0=^Z2, smso=^Z3,
16287 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
16288 # Apple Cat ][ 212 modem, + more all
16289 # controlled by ASCII Express: Pro.
16290 # From Dave Shaver <isucs1!shaver>
16291 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
16294 acsc=, clear=^L, cuf1=^\,
16295 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16296 flash=^W35^W06, home=^Y,
16297 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
16299 apple-uterm|Ultraterm for Apple micros,
16302 acsc=, clear=^L, cuf1=^\,
16303 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16304 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
16305 # from trwrba!bwong (Bradley W. Wong):
16307 # This entry assumes that you are using an apple with the UCSD Pascal
16308 # language card. SYSTEM.MISCINFO is assumed to be the same as that
16309 # supplied with the standard apple except that screenwidth should be set
16310 # using SETUP to 80 columns. Note that the right arrow in not mapped in
16311 # this termcap entry. This is because that key, on the Apple, transmits
16312 # a ^U and would thus preempt the more useful "up" function of vi.
16315 apple80p|80-column apple with Pascal card,
16318 clear=^Y^L, cuf1=^\\:,
16319 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16322 # Apple II+ equipped with Videx 80 column card
16324 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
16325 # manually converted by D A Gwyn
16327 # DO NOT use any terminal emulation with this data base, it works directly
16328 # with the Videx card. This has been tested with vi 1200 baud and works fine.
16330 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
16331 # 1 screen, while in R2 ^U doesn't.
16332 # For inverse alternate character set add:
16333 # <smacs>=^O:<rmacs>=^N:
16334 # (apple-v: added it#8 -- esr)
16335 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
16337 cols#80, it#8, lines#24,
16338 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
16339 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
16340 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
16341 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
16342 khome=^Y, rmso=^Z2, smso=^Z3,
16343 apple-videx3|vapple|Apple II with 80 col card,
16346 clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16347 cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16348 kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
16349 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
16350 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
16351 aepro|Apple II+ running ASCII Express Pro--vt52,
16354 clear=\014$<300/>, cuf1=\EC,
16355 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16357 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
16358 apple-vm80|ap-vm80|apple with viewmax-80,
16361 clear=\014$<300/>, cuf1=^\\:,
16362 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
16363 ed=\013$<300/>, el=^], home=\031$<200/>,
16365 #### Apple Lisa & Macintosh
16368 # (lisa: changed <cvvis> to <cnorm> -- esr)
16369 lisa|apple lisa console display (black on white),
16370 OTbs, am, eo, msgr,
16371 cols#88, it#8, lines#32,
16372 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
16373 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
16374 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16375 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
16376 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16377 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
16378 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
16379 liswb|apple lisa console display (white on black),
16380 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
16381 smso=\E[m, smul=\E[4m, use=lisa,
16383 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
16384 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
16386 # These entries assume that the 'Auto Wraparound' is enabled.
16387 # Xon-Xoff flow control should also be enabled.
16389 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
16390 # settings are in non-volatile memory and don't need to be reset upon login.
16391 # Also setting the number of columns glitches the screen annoyingly.
16392 # You can type "reset" to get them set.
16394 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
16395 OTbs, OTpt, am, xenl, xon,
16396 OTkn#4, cols#80, it#8, lines#24, vt#3,
16397 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
16398 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16399 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16400 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
16401 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
16402 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
16403 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
16404 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16405 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
16406 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16408 # Lisaterm in 132 column ("wide") mode.
16409 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
16411 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
16412 # Although MacTerminal has insert/delete line, it is commented out here
16413 # since it is much faster and cleaner to use the "lock scrolling region"
16414 # method of inserting and deleting lines due to the MacTerminal implementation.
16415 # Also, the "Insert/delete ch" strings have an extra character appended to them
16416 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
16417 # supported by MacTerminal.
16418 mac|macintosh|Macintosh with MacTerminal,
16421 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
16422 # Lisaterm in 132 column ("wide") mode.
16423 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
16426 # The AppKit Terminal.app descriptions all have names beginning with
16427 # "nsterm". Note that the statusline (-s) versions use the window
16428 # titlebar as a phony status line, and may produce warnings during
16429 # compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
16430 # these warnings, or even ignore these entries entirely. Apps which
16431 # need to position the cursor or do other fancy stuff inside the status
16432 # line won't work with these entries. They're primarily useful for
16433 # programs like Pine which provide simple notifications in the status
16434 # line. Please note that non-ASCII characters don't work right in the
16435 # status line, since Terminal.app incorrectly interprets their Unicode
16436 # codepoints as MacRoman codepoints.
16438 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
16439 # "nsterm" to comply with the name length and case conventions and
16440 # limitations of various software packages [notably Solaris terminfo
16441 # and UNIX.] A single Apple_Terminal alias is retained for
16442 # backwards-compatbility.
16444 # * Added function key support (F1-F4). These only work in Terminal.app
16445 # version 51, hopefully the capabilities won't cause problems for people
16446 # using version 41.
16448 # * Added "full color" (-c) entries which support the 16-color mode in
16451 # * By default, version 51 uses UTF-8 encoding with broken altcharset
16452 # support, so "ASCII" (-7) entries without altcharset support were
16455 # nsterm - AppKit Terminal.app
16457 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
16458 # Terminal.app. It is a partial VT100 emulation with some xterm-like
16459 # extensions. This terminfo was written to describe versions 41
16460 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
16461 # version 10.1) of Terminal.app.
16463 # Terminal.app runs under the Mac OS X Quartz windowing system (and
16464 # other AppKit-supported windowing systems.) On the Mac OS X machine I
16465 # use, the executable for Terminal.app is:
16466 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
16468 # If you're looking for a description of the full-screen system
16469 # console which runs under Apple's Darwin operating system on PowerPC
16470 # platforms, see the "xnuppc" entry instead.
16472 # There were no function keys in version 41. In version 51, there are
16473 # four working function keys (F1, F2, F3 and F4.) The function keys
16474 # are included in all of these entries.
16476 # It does not support mouse pointer position reporting. Under some
16477 # circumstances the cursor can be positioned using option-click; this
16478 # works by comparing the cursor position and the selected position,
16479 # and simulating enough cursor-key presses to move the cursor to the
16480 # selected position. This technique fails in all but the simplest
16483 # It provides partial ANSI color support (background colors interacted
16484 # badly with bold in version 41, though, as reflected in :ncv:.) The
16485 # monochrome (-m) entries are useful if you've disabled color support
16486 # or use a monochrome monitor. The full color (-c) entries are useful
16487 # in version 51, which doesn't exhibit the background color bug. They
16488 # also enable an xterm-compatible 16-color mode.
16490 # The configurable titlebar is set using xterm-compatible sequences;
16491 # it is used as a status bar in the statusline (-s) entries. Its width
16492 # depends on font sizes and window sizes, but 50 characters seems to
16493 # be the default for an 80x24 window.
16495 # The MacRoman character encoding is used for some of the alternate
16496 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
16497 # disable alternate character set support entirely, and the "VT100"
16498 # (-acs) entries rely instead on Terminal.app's own buggy VT100
16499 # graphics emulation, which seems to think the character encoding is
16500 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
16501 # are useful in Terminal.app version 51, which supports UTF-8 and
16502 # other ASCII-compatible character encodings but does not correctly
16503 # implement VT100 graphics; once VT100 graphics are correctly
16504 # implemented in Terminal.app, the "VT100" (-acs) entries should be
16505 # usable in any ASCII-compatible character encoding [except perhaps
16506 # in UTF-8, where some experts argue for disallowing alternate
16507 # characters entirely.]
16509 # Terminal.app reports "vt100" as the terminal type, but exports
16510 # several environment variables which may aid detection in a shell
16511 # profile (i.e. .profile or .login):
16514 # TERM_PROGRAM=Apple_Terminal
16515 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
16516 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
16518 # For example, the following Bourne shell script would detect the
16519 # correct terminal type:
16521 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
16524 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
16528 # TERM="nsterm-c-7"
16532 # In a C shell derivative, this would be accomplished by:
16534 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
16535 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
16536 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
16537 # setenv TERM "nsterm"
16539 # setenv TERM "nsterm-c-7"
16544 # The '+' entries are building blocks
16545 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
16546 am, bw, msgr, xenl, xon,
16547 cols#80, it#8, lines#24,
16548 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16549 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16550 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16551 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16552 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
16553 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16554 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16555 kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
16556 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16557 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16558 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
16559 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16560 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
16562 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
16563 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16564 enacs=\E(B\E)0, rmacs=^O,
16565 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16566 smacs=^N, use=nsterm+7,
16568 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
16569 acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
16570 enacs=\E(B\E)0, rmacs=^O,
16571 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16572 smacs=^N, use=nsterm+7,
16574 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
16577 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
16579 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
16580 op=\E[0m, use=ibm+16color,
16582 nsterm+c41|AppKit Terminal.app v41 color support,
16583 colors#8, ncv#37, pairs#64,
16584 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16586 # These are different combinations of the building blocks
16588 # ASCII charset (-7)
16589 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
16592 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
16593 use=nsterm+s, use=nsterm+7,
16595 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
16596 use=nsterm+c41, use=nsterm+7,
16598 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
16599 use=nsterm+c, use=nsterm+7,
16601 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
16602 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
16604 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
16605 use=nsterm+s, use=nsterm+c, use=nsterm+7,
16607 # VT100 alternate-charset (-acs)
16608 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
16611 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
16612 use=nsterm+s, use=nsterm+acs,
16614 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
16615 use=nsterm+c41, use=nsterm+acs,
16617 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
16618 use=nsterm+c, use=nsterm+acs,
16620 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
16621 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
16623 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
16624 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
16627 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
16630 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
16631 use=nsterm+s, use=nsterm+mac,
16633 nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
16634 use=nsterm+c41, use=nsterm+mac,
16636 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
16637 use=nsterm+c, use=nsterm+mac,
16639 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
16640 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
16642 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
16643 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
16646 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
16647 # and D P Schreber comparing to nsterm-c-s-acs.
16649 # D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
16650 # defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
16651 # and that it is not set in Terminal's preferences dialog.
16652 nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
16653 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
16654 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16655 knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
16657 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
16659 # On PowerPC platforms, Apple's Darwin operating system uses a
16660 # full-screen system console derived from a NetBSD framebuffer
16661 # console. It is an ANSI-style terminal, and is not really VT-100
16664 # Under Mac OS X, this is the system console driver used while in
16665 # single-user mode [reachable by holding down Command-S during the
16666 # boot process] and when logged in using console mode [reachable by
16667 # typing ">console" at the graphical login prompt.]
16669 # If you're looking for a description of the Terminal.app terminal
16670 # emulator which runs under the Mac OS X Quartz windowing system (and
16671 # other AppKit-supported windowing systems,) see the "nsterm"
16674 # NOTE: Under Mac OS X version 10.1, the default login window does not
16675 # prompt for user name, instead requiring an icon to be selected from
16676 # a list of known users. Since the special ">console" login is not in
16677 # this list, you must make one of two changes in the Login Window
16678 # panel of the Login section of System Prefs to make the special
16679 # ">console" login accessible. The first option is to enable 'Show
16680 # "Other User" in list for network users', which will add a special
16681 # "Other..." icon to the graphical login panel. Selecting "Other..."
16682 # will present the regular graphical login prompt. The second option
16683 # is to change the 'Display Login Window as:' setting to 'Name and
16684 # password entry fields', which replaces the login panel with a
16685 # graphical login prompt.
16687 # There are no function keys, at least not in Darwin 1.3.
16689 # It has no mouse support.
16691 # It has full ANSI color support, and color combines correctly with
16692 # all three supported attributes: bold, inverse-video and underline.
16693 # However, bold colored text is almost unreadable (bolding is
16694 # accomplished using shifting and or-ing, and looks smeared) so bold
16695 # has been excluded from the list of color-compatible attributes
16696 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
16697 # monochrome monitor.
16699 # There is one serious bug with this terminal emulation's color
16700 # support: repositioning the cursor onto a cell with non-matching
16701 # colors obliterates that cell's contents, replacing it with a blank
16702 # and displaying a colored cursor in the "current" colors. There is
16703 # no complete workaround at present [other than using the monochrome
16704 # (-m) entries,] but removing the (msgr) capability seemed to help.
16706 # The "standout" chosen was simple reverse-video, although a colorful
16707 # standout might be more aesthetically pleasing. Similarly, the bold
16708 # chosen is the terminal's own smeared bold, although a simple
16709 # color-change might be more readable. The color-bold (-b) entries
16710 # uses magenta colored text for bolding instead. The fancy color (-f
16711 # and -f2) entries use color for bold, standout and underlined text
16712 # (underlined text is still underlined, though.)
16714 # Apparently the terminal emulator does support a VT-100-style
16715 # alternate character set, but all the alternate character set
16716 # positions have been left blank in the font. For this reason, no
16717 # alternate character set capabilities have been included in this
16718 # description. The console driver appears to be ASCII-only, so (enacs)
16719 # has been excluded [although the VT-100 sequence does work.]
16721 # The default Mac OS X and Darwin installation reports "vt100" as the
16722 # terminal type, and exports no helpful environment variables. To fix
16723 # this, change the "console" entry in /etc/ttys from "vt100" to
16724 # "xnuppc-WxH", where W and H are the character dimensions of your
16725 # console (see below.)
16727 # The font used by the terminal emulator is apparently one originally
16728 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
16729 # file includes descriptions for the following geometries:
16731 # Pixels Characters Entry Name (append -m for monochrome)
16732 # -------------------------------------------------------------------
16733 # 640x400 80x25 xnuppc-80x25
16734 # 640x480 80x30 xnuppc-80x30
16735 # 720x480 90x30 xnuppc-90x30
16736 # 800x600 100x37 xnuppc-100x37
16737 # 896x600 112x37 xnuppc-112x37
16738 # 1024x640 128x40 xnuppc-128x40
16739 # 1024x768 128x48 xnuppc-128x48
16740 # 1152x768 144x48 xnuppc-144x48
16741 # 1280x1024 160x64 xnuppc-160x64
16742 # 1600x1024 200x64 xnuppc-200x64
16743 # 1600x1200 200x75 xnuppc-200x75
16744 # 2048x1536 256x96 xnuppc-256x96
16746 # The basic "xnuppc" entry includes no size information, and the
16747 # emulator includes no reporting capability, so you'll be at the mercy
16748 # of the TTY device (which reports incorrectly on my hardware.) The
16749 # color-bold entries do not include size information.
16751 # The '+' entries are building blocks
16752 xnuppc+basic|Darwin PowerPC Console basic capabilities,
16753 am, bce, mir, xenl,
16755 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16756 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16757 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16758 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
16759 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
16760 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16761 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
16762 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16764 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16765 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16766 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
16768 xnuppc+c|Darwin PowerPC Console ANSI color support,
16769 colors#8, ncv#32, pairs#64,
16770 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16772 xnuppc+b|Darwin PowerPC Console color-bold support,
16775 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16778 xnuppc+f|Darwin PowerPC Console fancy color support,
16780 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
16781 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
16783 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
16786 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
16787 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
16789 # Building blocks for specific screen sizes
16790 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
16793 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
16796 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
16799 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
16800 cols#100, lines#37,
16802 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
16803 cols#112, lines#37,
16805 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
16806 cols#128, lines#40,
16808 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
16809 cols#128, lines#48,
16811 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
16812 cols#144, lines#48,
16814 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
16815 cols#160, lines#64,
16817 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
16818 cols#200, lines#64,
16820 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
16821 cols#200, lines#75,
16823 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
16824 cols#256, lines#96,
16826 # These are different combinations of the building blocks
16828 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
16831 xnuppc|darwin|Darwin PowerPC Console (color),
16832 use=xnuppc+c, use=xnuppc+basic,
16834 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
16837 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
16838 use=xnuppc+b, use=xnuppc+c,
16840 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
16843 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
16844 use=xnuppc+f, use=xnuppc+c,
16846 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
16849 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
16850 use=xnuppc+f2, use=xnuppc+c,
16852 # Combinations for specific screen sizes
16853 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
16854 use=xnuppc+80x25, use=xnuppc+basic,
16856 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
16857 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
16859 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
16860 use=xnuppc+80x30, use=xnuppc+basic,
16862 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
16863 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
16865 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
16866 use=xnuppc+90x30, use=xnuppc+basic,
16868 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
16869 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
16871 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
16872 use=xnuppc+100x37, use=xnuppc+basic,
16874 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
16875 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
16877 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
16878 use=xnuppc+112x37, use=xnuppc+basic,
16880 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
16881 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
16883 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
16884 use=xnuppc+128x40, use=xnuppc+basic,
16886 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
16887 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
16889 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
16890 use=xnuppc+128x48, use=xnuppc+basic,
16892 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
16893 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
16895 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
16896 use=xnuppc+144x48, use=xnuppc+basic,
16898 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
16899 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
16901 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
16902 use=xnuppc+160x64, use=xnuppc+basic,
16904 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
16905 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
16907 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
16908 use=xnuppc+200x64, use=xnuppc+basic,
16910 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
16911 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
16913 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
16914 use=xnuppc+200x75, use=xnuppc+basic,
16916 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
16917 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
16919 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
16920 use=xnuppc+256x96, use=xnuppc+basic,
16922 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
16923 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
16925 #### Radio Shack/Tandy
16928 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
16929 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
16930 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
16931 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
16933 cols#80, it#8, lines#24,
16934 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
16935 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
16936 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
16937 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
16938 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
16939 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
16940 # (trs2: removed obsolete ":nl=^_:" -- esr)
16941 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
16943 cols#80, it#8, lines#24,
16944 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
16945 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
16946 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
16947 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
16948 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
16949 # (This had extension capabilities
16950 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
16951 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
16952 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
16953 trs16|trs-80 model 16 console,
16955 cols#80, it#8, lines#24,
16956 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
16957 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
16958 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16959 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
16960 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16961 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
16962 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
16963 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
16964 smacs=\ERG, smso=\ERD,
16969 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
16972 cols#80, it#8, lines#25,
16973 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
16974 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
16975 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
16976 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
16977 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
16978 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
16979 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
16981 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
16983 # MiNT VT52 emulation. 80 columns, 25 rows.
16984 # MiNT is Now TOS, the operating system which comes with all Ataris now
16985 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
16986 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
16987 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
16988 st52|Atari ST with VT52 emulation,
16991 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
16992 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16993 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
16994 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
16995 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
16996 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
16997 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
16998 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
16999 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
17000 smcup=\Ee, smso=\Ep,
17002 #### Commodore Business Machines
17004 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17005 # after years of shaky engineering and egregious mismanagement. Made one
17006 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17007 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17008 # ever (most units sold); they can still be found gathering dust in closets
17012 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17013 # Added a few more entries, converted caret-type control sequence (^x) entries
17014 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17015 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17017 # :as:, :ae: Support for alternate character sets.
17018 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17019 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17020 # This one appears to fix a problem I always had with a line ending
17021 # at 'width+1' (I think) followed by a blank line in vi. The blank
17022 # line tended to disappear and reappear depending on how the screen
17023 # was refreshed. Note that this is probably needed only if you use
17024 # something like a Dnet Fterm with the window sized to some peculiar
17025 # dimension larger than 80 columns.
17026 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17027 # (amiga: removed obsolete :kn#10:,
17028 # also added empty <acsc> to suppress a warning --esr)
17030 OTbs, am, bw, xenl,
17032 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17033 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17034 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17035 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17036 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17037 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17038 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17039 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17040 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17041 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17042 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17043 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17044 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17046 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17047 # (amiga: added empty <acsc> to suppress a warning.
17048 # I'm told this entry screws up badly with AS225, the Amiga
17049 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17050 amiga-h|Hans Verkuil's Amiga ANSI,
17053 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17054 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17055 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17056 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17057 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17058 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17059 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17060 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17061 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17062 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17063 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17064 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17065 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17066 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17067 smso=\2337m, smul=\2334m,
17069 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17071 # Pavel Fedin added
17076 amiga-8bit|Amiga ANSI using 8-bit controls,
17077 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17078 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17079 kpp=\233T, ri=\215, rin@, use=amiga-h,
17081 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17082 # requires use of appropriate preferences settings.
17083 amiga-vnc|Amiga using VNC console (black on light gray),
17084 am, da, db, msgr, ndscr,
17085 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17086 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17087 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17088 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17089 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17090 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17091 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17092 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17093 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17094 indn=\E[%p1%dS, invis=\E8m,
17095 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17096 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17097 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17098 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17099 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17100 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17101 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17102 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17103 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17104 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17105 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17106 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17107 smso=\E[1m, smul=\E[4m,
17109 # MorphOS on Genesi Pegasos
17110 # By Pavel Fedin <sonic_amiga@rambler.ru>
17112 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17113 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17114 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17115 ri=\215, rin@, use=amiga-h,
17117 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17118 # I'm trying to write a termcap for a commodore b-128, and I'm
17119 # having a little trouble. I've had to map most of my control characters
17120 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17121 # and create some functions (like cm), but thats life.
17122 # The problem is with the arrow keys - right, and up work fine, but
17123 # left deletes the previous character and down I just can't figure out.
17124 # Jove knows what I want, but I don't know what it's sending to me (it
17125 # isn't thats bound to next-line in jove).
17126 # Anybody got any ideas? Here's my termcap.
17127 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17129 commodore|b-128|Commodore B-128 micro,
17131 OTdN#20, cols#80, lines#24, pb#150,
17132 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17133 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17134 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17135 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17136 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17141 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17142 northstar|North Star Advantage,
17146 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17147 el=\016$<200/>, home=\034\032$<200/>,
17151 # Thu Jul 7 03:55:16 1983
17153 # As an aside, be careful; it may sound like an anomaly on the
17154 # Osborne, but with the 80-column upgrade, it's too easy to
17155 # enter lines >80 columns!
17157 # I've already had several comments...
17158 # The Osborne-1 with the 80-col option is capable of being
17159 # 52, 80, or 104 characters wide; default to 80 for compatibility
17160 # with most systems.
17162 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17163 osborne-w|osborne1-w|osborne I in 104-column mode,
17165 cols#104, lines#24,
17166 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17167 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17168 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
17169 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
17170 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
17171 osborne|osborne1|osborne I in 80-column mode,
17172 OTbs, am, mir, msgr, ul, xhp,
17173 OTdB#4, cols#80, lines#24,
17174 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
17175 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17176 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
17177 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
17178 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
17180 # Osborne Executive definition from BRL
17181 # Similar to tvi920
17182 # Added by David Milligan and Tom Smith (SMU)
17183 osexec|Osborne executive,
17185 OTug#1, cols#80, lines#24, xmc#1,
17186 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17187 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17188 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
17189 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
17190 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
17191 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
17192 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
17195 #### Console types for obsolete UNIX clones
17197 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
17198 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
17199 # were commercial, Minix an educational tool sold in conjunction with a book.
17200 # Memory-segmentation limits and a strong tendency to look like V7 long after
17201 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
17202 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
17203 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
17204 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
17205 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
17206 # even as single processes under SunOS and the Macintosh OS.
17209 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
17210 minix|minix console (v1.7),
17212 cols#80, it#8, lines#25,
17213 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17214 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17215 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17216 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17217 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17218 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17219 is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17220 kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
17221 kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
17222 lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
17223 rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17224 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
17225 minix-old|minix console (v1.5),
17227 cols#80, it#8, lines#25,
17228 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17229 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17230 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17231 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17232 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17233 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17234 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17235 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
17236 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
17237 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17238 # The linewrap option can be specified by editing /usr/include/minix/config.h
17239 # before recompiling the minix 1.5 kernel.
17240 minix-old-am|minix console with linewrap,
17243 pc-minix|minix console on an Intel box,
17244 use=klone+acs, use=minix,
17246 # According to the Coherent 2.3 manual, the PC console is similar
17247 # to a z19. The differences seem to be (1) 25 lines, (2) no status
17248 # line, (3) standout is broken, (4) ins/del line is broken, (5)
17249 # has blinking and bold.
17250 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
17252 cols#80, it#8, lines#25,
17253 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17254 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
17255 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
17256 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
17257 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
17259 # According to the Venix 1.1 manual, the PC console is similar
17260 # to a DEC vt52. Differences seem to be (1) arrow keys send
17261 # different strings, (2) enhanced standout, (3) added insert/delete line.
17262 # Note in particular that it doesn't have automatic margins.
17263 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
17264 # not described here because this derives from an old termcap entry.
17265 pc-venix|venix|IBM PC console running Venix,
17266 cols#80, it#8, lines#25,
17267 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17268 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17269 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
17270 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
17272 #### Miscellaneous microcomputer consoles
17274 # If you know anything more about any of these, please tell me.
17277 # The MAI Basic Four computer was obsolete at the end of the 1980s.
17278 # It may be used as a terminal by putting it in "line" mode as seen on
17279 # one of the status lines.
17280 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
17281 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
17282 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
17283 # used \ED instead.
17284 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
17285 mai|basic4|MAI Basic Four in ansi mode,
17286 am, da, db, mir, msgr,
17287 cols#82, it#8, lines#25,
17288 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
17289 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
17290 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
17291 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
17292 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
17293 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
17294 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17295 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
17296 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
17297 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17298 smir=\E[4h, smso=\E[7m, smul=\E[4m,
17299 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
17300 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
17302 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
17303 # The Basis 108 was a Apple II clone, manufactured by the "Basis
17304 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
17305 # about 1,5 km from where I live, but doesn't build own computers any
17306 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
17307 # equipped with one or two 5.25" disk drives, had a monochrome and colour
17308 # video output for a TV set or a dedicated monitor and several slots for
17309 # Apple II cards. Basis 108 were quite popular at german schools before
17310 # the advent of the IBM PC. They run, for example, the UCSD Pascal
17311 # development system (which I used even in 1993 to program the steering
17312 # and data recording for our school's experimental solar panel :), Apple DOS
17314 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
17315 basis|BASIS108 computer with terminal translation table active,
17316 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
17317 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
17318 smso=\E(, use=adm3a,
17319 # luna's BMC terminal emulator
17320 luna|luna68k|LUNA68K Bitmap console,
17321 cols#88, lines#46, use=ansi-mini,
17322 megatek|pegasus workstation terminal emulator,
17325 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
17326 # interface (pre-Macintosh by several years) that went nowhere.
17327 xerox820|x820|Xerox 820,
17330 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17331 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
17334 #### Videotex and teletext
17337 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
17338 # \E[?3l 80 columns
17339 # \E[?4l scrolling on
17340 # \E[12h local echo off
17341 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
17342 # \E)0 G1 DEC set (line graphics)
17344 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
17345 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
17346 OTbs, eslok, hs, xenl,
17347 cols#80, it#8, lines#24, wsl#72, xmc#0,
17348 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
17349 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
17350 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17351 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17352 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17353 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17354 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
17355 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
17356 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
17357 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
17358 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
17359 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
17360 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
17361 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
17362 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
17363 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
17364 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
17365 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
17366 u6=\E[%i%d;%dR, u7=\E[6n,
17368 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
17370 minitel1|minitel 1,
17371 am, bw, eslok, hs, hz, msgr,
17372 colors#8, cols#40, lines#24, pairs#8,
17373 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
17374 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17375 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
17376 enacs=^Y, fsl=^J, home=^^, ind=^J,
17377 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
17378 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
17379 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
17380 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
17381 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
17382 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
17383 minitel1b|minitel 1-bistandard (in 40cols mode),
17385 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
17386 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17387 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
17388 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
17389 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17390 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
17391 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
17392 # <rmkx> posait des problemes (logout en sortant de vi).
17393 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
17395 colors@, cols#80, it#8, pairs@,
17396 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
17397 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
17398 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
17399 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
17400 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
17401 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
17402 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
17403 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
17404 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
17406 ######## OBSOLETE VDT TYPES
17408 # These terminals are *long* dead -- these entries are retained for
17409 # historical interest only.
17411 #### Amtek Business Machines
17414 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
17415 # but these caps were commented out in 8.3; also, removed overridden
17416 # ":do=^J:" -- esr)
17417 abm80|amtek business machines 80,
17420 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
17421 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
17422 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
17424 #### Bell Labs blit terminals
17426 # These were AT&T's official entries. The 5620 FAQ maintained by
17427 # David Breneman <daveb@dgtl.com> has this to say:
17429 # Actually, in the beginning was the Jerq, and the Jerq was white with a
17430 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
17431 # was good. But lo, upon the horizon loomed a mighty management-type person
17432 # (known now only by the initials VP) who said, the mighty Jerq must stay
17433 # alone, and could not go forth into the world. So Locanthi and Pike put the
17434 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
17435 # world. And the Jerq lived the rest of its days in research, but never
17436 # strayed from those paths.
17438 # In all seriousness, the Blit was originally known as the Jerq, but when
17439 # it started to be shown outside of the halls of the Bell Labs Research
17440 # organization, the management powers that be decided that the name could
17441 # not remain. So it was renamed to be Blit. This was in late 1981.
17443 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
17447 blit|jerq|blit running teletype rom,
17449 cols#87, it#8, lines#72,
17450 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17451 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17452 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
17453 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
17454 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
17455 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
17457 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
17458 cbblit|fixterm|blit running columbus code,
17460 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
17461 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
17462 smul=\EU", use=blit,
17464 oblit|ojerq|first version of blit rom,
17465 am, da, db, eo, mir, ul, xon,
17466 cols#88, it#8, lines#72,
17467 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17468 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
17469 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
17470 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
17473 #### Bolt, Beranek & Newman (bbn)
17475 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
17476 # The parent company, best known as the architects of the Internet, is
17479 # Jeff DelPapa <dp@world.std.com> writes:
17480 # The bitgraph was a large white box that contained a monochrome bitmap
17481 # display, and a 68000 to run it. You could download code and run it on
17482 # the cpu, it had 128kb (I think) of memory. I used one in the late
17483 # 70's, sure beat a vt100. It had one strange feature tho -- it used
17484 # the cpu to bitblt pixels to scroll, it took longer than the refresh
17485 # rate, and looked like a rubber sheet stretching, then snapping
17486 # upwards. It had everything the early mac had, except a floppy drive a
17487 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
17488 # Beranek and Neuman) sold at most a few hundred of them to the real
17489 # world. DOD may have bought more...
17492 # Entries for the BitGraph terminals. The problem
17493 # with scrolling in vi can only be fixed by getting BBN to put
17494 # smarter scroll logic in the terminal or changing vi or padding
17495 # scrolls with about 500 ms delay.
17497 # I always thought the problem was related to the terminal
17498 # counting newlines in its input buffer before scrolling and
17499 # then moving the screen that much. Then vi comes along and
17500 # paints lines in on the bottom line of the screen, so you get
17501 # this big white gap.
17503 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
17504 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17506 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
17507 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17509 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
17512 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
17513 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17514 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
17515 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
17516 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17517 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
17518 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
17519 sgr0=\E[m, smkx=\E=, smso=\E[7m,
17521 bg1.25rv|bbn bitgraph 1.25 (reverse video),
17522 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17524 bg1.25nv|bbn bitgraph 1.25 (normal video),
17525 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17527 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
17528 bg1.25|bbn bitgraph 1.25,
17530 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
17531 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
17532 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
17533 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
17534 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
17535 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
17536 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
17539 #### Bull (bq, dku, vip)
17541 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
17543 #============================================#
17544 # BULL QUESTAR 210 `SDP' terminals emulation #
17545 #============================================#
17547 # Description written by R.K.Saunders (Bull Transac)
17549 # Modifications written by F. Girard (Bull MTS)
17550 # 19-05-87 V02.00.01
17551 # 17-12-87 V02.00.02
17552 # 15-09-89 V02.00.05
17554 # Typical technical selections F1 (modes SDP/ROLL):
17555 # -------------------------------------------------------
17556 # | 01 02 03 04 05 06 07 08 09 10 |
17557 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
17559 # | 11 12 13 14 15 16 17 18 19 20 |
17560 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
17562 # | 21 22 23 24 25 26 27 28 29 30 |
17563 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
17565 # | 31 32 33 34 35 36 37 38 39 40 |
17566 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
17567 # -------------------------------------------------------
17568 # Typical firmware identification F5 "etat 6":
17569 # P287.02.04b (AZERTY)
17570 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
17571 # P298.03.03 (monochrome) or P374.03.02 (colour)
17573 # SM SDP mode (VIP command): ^[[?=h
17574 # RIS (erases screen): ^[c
17575 # DMI disable keyboard: ^[`
17576 # SM double rendition mode: ^[[?>h
17577 # RM solicited status mode: ^[[5l
17578 # RM character mode: ^[[>l
17579 # RM echoplex mode: ^[[12l
17580 # RM column tab mode: ^[[18l
17581 # RM forbid SS2 keyboard mode: ^[[?<l
17582 # SM scroll mode: ^[[=h
17583 # FCF enable XON/XOFF: ^[P1s^[\
17584 # MTL select end msg character: ^[[^Wp
17585 # EMI enable keyboard: ^[b
17586 # RIS retour etat initial: ^[c
17587 # enable FC keypad: ^[[?<h,
17588 # MPW map status line window: ^[PY99:98^[\
17589 # SCP select status line: ^[[0;98v
17590 # ED erase entire partition: ^[[2J
17591 # SCP select main partition: ^[[v
17592 # SM character insertion mode: ^[[4h
17593 # RM character replacement mode: ^[[4l
17594 # COO cursor on: ^[[r
17595 # COO cursor off: ^[[1r
17596 # SGR dim (turquoise) rev attr: ^[[2;7m
17597 # SGR Data normal attr: ^[[m
17598 # SO Line-graphic mode ON: ^N
17599 # SI Line-graphic mode OFF: ^O
17600 # MC start routing to printer: ^[[5i
17601 # MC stop routing to printer: ^M^[[4i
17604 # This entry covers the following terminals:
17605 # dku7102, tws2102, and tws models 2105 to 2112
17606 tws-generic|dku7102|Bull Questar tws terminals,
17607 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
17608 cols#80, it#8, lines#24, wsl#80,
17609 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
17610 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
17611 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
17612 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
17613 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17614 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
17615 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
17616 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
17617 il1=\E[L, ind=^J, invis=\E[0;8m,
17618 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
17619 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
17620 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
17621 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17622 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
17623 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
17624 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
17625 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
17626 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
17627 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
17628 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
17629 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17630 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
17631 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
17632 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
17633 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
17634 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
17636 tws2103|xdku|BULL Questar tws2103,
17637 ht=^I, use=tws-generic,
17638 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
17639 ht=^I, use=tws2102-sna,
17640 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
17641 clear=\E[2J\E[H, cup@, dl@, dl1@,
17642 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
17643 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
17645 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
17646 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
17647 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
17649 #=========================================================#
17650 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
17651 #=========================================================#
17653 # Description written by J. Staerck (BULL SA)
17654 # Copyright (c) 1989 BULL SA
17655 #---------------------------------------------------------------------------
17656 # This entry is used for terminals with vt320 emulation mode
17657 # and following set-up :
17658 # 8 bit ISO Latin Character Set (ISO 8859-1),
17659 # 7 bit Control Characters,
17660 # 80 columns screen.
17661 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
17662 # They are used in string capabilities with vt220-320 emulation mode.
17663 # In the following DEC definitions, two kinds of terminfo databases are
17665 # 1. the first with Command Sequence Introducer starting with escape
17666 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
17667 # 2. the second with Command Sequence Introducer starting with escape
17668 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
17669 # Soft Terminal Reset esc [ ! p
17670 # RIS (erases screen): esc c
17671 # DECKPNM numeric keypad mode: esc >
17672 # DECKPAM applic. keypad mode: esc =
17673 # DECSTBM Scrolling region: esc [ r
17674 # SCS select G0 = US: esc ( B
17675 # SCS select G1 = line-graphic: esc ) 0
17676 # Select 7-bit C1 controls: esc sp F
17677 # Select 8-bit C1 controls: esc sp G
17678 # Select cursor home: esc [ H
17679 # Select erase screen: esc [ J
17680 # SM KAM lock keyboard: esc [ 2 h
17681 # RM KAM unlock keyboard: esc [ 2 l
17682 # SM SRM local echo off: esc [ 1 2 h
17683 # RM SRM local echo on: esc [ 1 2 l
17684 # SM LNM New line : esc [ 2 0 h
17685 # RM LNM return = CR only: esc [ 2 0 l
17686 # SM DECCKM cursor keys mode: esc [ ? 1 h
17687 # RM DECCKM appli. keys mode: esc [ ? 1 l
17688 # SM DECANM ANSI mode on: esc [ ? 2 h
17689 # RM DECANM ANSI mode off: esc [ ? 2 l
17690 # SM DECCOLM 132-column screen: esc [ ? 3 h
17691 # RM DECCOLM 80-column screen: esc [ ? 3 l
17692 # SM DECSCLM Smooth scroll: esc [ ? 4 h
17693 # RM DECSCLM Jump scroll: esc [ ? 4 l
17694 # SM DECSCNM screen light backgr. esc [ ? 5 h
17695 # RM DECSCNM screen dark backgr. esc [ ? 5 l
17696 # SM DECOM move within margins: esc [ ? 6 h
17697 # RM DECOM move outside margins: esc [ ? 6 l
17698 # SM DECAWM auto right margin: esc [ ? 7 h
17699 # RM DECAWM auto right margin: esc [ ? 7 l
17700 # SM DECARM auto repeat: esc [ ? 8 h
17701 # RM DECARM auto repeat: esc [ ? 8 l
17702 # DECSASD Select active main: esc [ 0 $ }
17703 # DECSASD Select active status: esc [ 1 $ }
17704 # DECSSDT Select status none: esc [ 0 $ ~
17705 # DECSSDT Select status indic.: esc [ 1 $ ~
17706 # DECSSDT Select status host-wr: esc [ 2 $ ~
17707 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
17708 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
17709 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
17710 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
17711 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
17712 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
17713 # SM DECKBUM clavier informatique esc [ ? 6 8 h
17714 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
17715 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
17716 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
17717 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
17718 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
17719 # Char. and Line attributes: esc [ Ps ... Ps m
17720 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17721 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17724 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
17725 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
17726 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17727 cols#80, it#8, lines#24, vt#3, wsl#80,
17728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17729 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17730 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
17731 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17732 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17733 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17734 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17735 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
17736 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
17737 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
17738 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17739 is1=\E[63;1"p\E[2h,
17740 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17741 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
17742 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
17743 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
17744 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
17745 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
17746 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
17747 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17748 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17749 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
17750 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17751 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
17752 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
17753 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17754 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17755 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
17756 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
17757 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
17758 bq300-rv|Bull vt320 reverse 80 columns,
17759 flash=\E[?5l$<50>\E[?5h,
17760 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17762 bq300-w|Bull vt320 132 columns,
17764 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17765 rs2=\E[?3h, use=bq300,
17766 bq300-w-rv|Bull vt320 reverse mode 132 columns,
17768 flash=\E[?5l$<50>\E[?5h,
17769 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17770 rs2=\E[?3h, use=bq300,
17772 # This entry is used for terminals with vt320 emulation mode
17773 # and following set-up :
17774 # 8 bit ISO Latin Character Set (ISO 8859-1),
17775 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
17776 # 80 columns screen.
17777 # Soft Terminal Reset csi ! p
17778 # RIS (erases screen): esc c
17779 # DECKPNM numeric keypad mode: esc >
17780 # DECKPAM applic. keypad mode: esc =
17781 # DECSTBM Scrolling region: esc [ r
17782 # SCS select G0 = US: esc ( B
17783 # SCS select G1 = line-graphic: esc ) 0
17784 # Select 7-bit C1 controls: esc sp F
17785 # Select 8-bit C1 controls: esc sp G
17786 # Select cursor home: csi H
17787 # Select erase screen: csi J
17788 # SM KAM lock keyboard: csi 2 h
17789 # RM KAM unlock keyboard: csi 2 l
17790 # SM SRM local echo off: csi 1 2 h
17791 # RM SRM local echo on: csi 1 2 l
17792 # SM LNM New line : csi 2 0 h
17793 # RM LNM return = CR only: csi 2 0 l
17794 # SM DECCKM cursor keys mode: csi ? 1 h
17795 # RM DECCKM appli. keys mode: csi ? 1 l
17796 # SM DECANM ANSI mode on: csi ? 2 h
17797 # RM DECANM ANSI mode off: csi ? 2 l
17798 # SM DECCOLM 132-column screen: csi ? 3 h
17799 # RM DECCOLM 80-column screen: csi ? 3 l
17800 # SM DECSCLM Smooth scroll: csi ? 4 h
17801 # RM DECSCLM Jump scroll: csi ? 4 l
17802 # SM DECSCNM screen light backgr. csi ? 5 h
17803 # RM DECSCNM screen dark backgr. csi ? 5 l
17804 # SM DECOM move within margins: csi ? 6 h
17805 # RM DECOM move outside margins: csi ? 6 l
17806 # SM DECAWM auto right margin: csi ? 7 h
17807 # RM DECAWM auto right margin: csi ? 7 l
17808 # SM DECARM auto repeat: csi ? 8 h
17809 # RM DECARM auto repeat: csi ? 8 l
17810 # DECSASD Select active main: csi 0 $ }
17811 # DECSASD Select active status: csi 1 $ }
17812 # DECSSDT Select status none: csi 0 $ ~
17813 # DECSSDT Select status indic.: csi 1 $ ~
17814 # DECSSDT Select status host-wr: csi 2 $ ~
17815 # SM DECTCEM Visible cursor: csi ? 2 5 h
17816 # RM DECTCEM Invisible cursor: csi ? 2 5 l
17817 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
17818 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
17819 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
17820 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
17821 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
17822 # Char. and Line attributes: csi Ps ... Ps m
17823 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17824 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17825 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
17826 bq300-8|Bull vt320 full 8 bits 80 columns,
17827 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17828 cols#80, it#8, lines#24, vt#3, wsl#80,
17829 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17830 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
17831 clear=\233H\233J, cnorm=\233?25h, cr=^M,
17832 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
17833 cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
17834 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
17835 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
17836 el=\233K, el1=\2331K, enacs=\E(B\E)0,
17837 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
17838 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
17839 is1=\E[63;2"p\E[2h,
17840 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17841 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
17842 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
17843 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17844 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
17845 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
17846 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
17847 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
17848 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
17849 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
17850 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
17851 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
17852 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
17853 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
17854 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17855 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17856 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
17857 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
17858 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
17859 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
17860 flash=\233?5l$<50>\233?5h,
17861 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17863 bq300-8w|Bull vt320 8-bit 132 columns,
17865 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17866 rs2=\233?3h, use=bq300-8,
17867 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
17869 flash=\233?5l$<50>\233?5h,
17870 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17871 rs2=\233?3h, use=bq300-8,
17873 # This entry is used for terminals with vt320 emulation mode
17874 # a 102 keys keyboard (PC scancode !) and following set-up :
17875 # 8 bit ISO Latin Character Set (ISO 8859-1),
17876 # 7 bit Control Characters,
17877 # 80 columns screen.
17878 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
17879 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
17880 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
17881 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
17882 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
17883 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17884 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
17885 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
17886 flash=\E[?5l$<50>\E[?5h,
17887 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17889 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
17891 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17892 rs2=\E[?3h, use=bq300-pc,
17893 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
17895 flash=\E[?5l$<50>\E[?5h,
17896 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17897 rs2=\E[?3h, use=bq300-pc,
17898 # 8 bit ISO Latin Character Set (ISO 8859-1),
17899 # 8 bit Control Characters,
17900 # 80 columns screen.
17901 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
17902 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
17903 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
17904 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
17905 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
17906 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
17907 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
17908 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
17909 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
17910 flash=\E[?5l$<50>\E[?5h,
17911 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17913 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
17915 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17916 rs2=\E[?3h, use=bq300-8-pc,
17917 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
17919 flash=\E[?5l$<50>\E[?5h,
17920 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17921 rs2=\E[?3h, use=bq300-8-pc,
17923 #======================================================#
17924 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
17925 #======================================================#
17927 # normal mode, 8 bits, 80 columns terminal.
17929 # RIS reset initial state: ^[c
17930 # BLE bell enable ^[h
17931 # BLD bell disable ^[g
17932 # CAMS char. attr. mode set ^[[D
17933 # CAMR char. attr. mode reset ^[[G
17935 # KBU keyboard unlock (set) ^[[W
17936 # KBL keyboard lock (reset) ^[[X
17937 # CM character mode (async.) ^[k
17938 # NEP non echoplex mode (by host) ^[l
17939 # EP echoplex mode (by host) ^[m
17940 # IM insert mode set ^[[I
17941 # IM insert mode reset ^[[J
17942 # RMS roll mode set ^[r
17943 # RMR roll mode reset ^[q
17944 # SM78 set mode vip7800 ^[[1q
17945 # SD scroll up (72 lines) ^[[0s
17946 # SD scroll down (72 lines) ^[[1s
17947 # RBM block mode reset ^[[E
17948 # SLS status line set ^[w
17949 # SLR status line reset ^[v
17950 # SLL status line lock ^[O
17951 # LGS Line-graphic mode set ^[G
17952 # LGR Line-graphic mode reset ^[F
17953 # TBC tab clear (at cursor pos.) ^[[g
17954 # TBI tab initialize ^[[N
17955 # TBS tab set (at cursor pos.) ^[p
17956 # PDS print data space ^[[0p
17957 # PHD print host data ^[[3p
17958 # PDT print data terminator ^[[<p
17959 # PRES print adapter reset ^[[2p
17960 # SSPR multi-part. reset ^[[<>u
17961 # SSP0 partition 0 set ^[[00u
17962 # SSP1 partition n format 1 ^[[PnPnSTRINGu
17963 # SSP2 partition n format 2 ^[[PnPnSTRINGu
17964 # SSP3 partition n format 3 ^[[PnPnu
17965 # ATR attribute (visual)
17968 # hide (blank) : ^[sH
17970 # inverse video : ^[sI
17975 # This covers the vip7800 and BQ3155-vip7800
17976 vip|Bull Questar 3155-7800,
17977 am, eslok, hs, km, mc5i, msgr, xenl, xon,
17978 cols#80, it#8, lines#24, vt#3, wsl#80,
17979 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
17980 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17981 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
17982 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
17983 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
17984 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
17985 is2=\E[00u\E[<>001001024080024080u\E[01u,
17986 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
17987 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
17988 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
17989 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
17990 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
17991 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
17992 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
17993 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
17994 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
17995 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
17996 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
17997 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
17998 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
17999 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18000 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18001 smul=\Es_, tbc=\E[N, tsl=\Ew,
18002 # normal screen, 8 bits, 132 columns terminal.
18003 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18005 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18006 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18008 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18009 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18010 cols#132, lines#72, wsl#132,
18011 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18016 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18017 # that is smaller than the screen, and puts up a warning message
18018 # outside the window. Te erases the warning message, puts the
18019 # window back to be the whole screen, and puts the cursor at just
18020 # below the small window. I defined <cnorm> and <civis> to really turn
18021 # the cursor on and off, but I have taken this out since I don't
18022 # like the cursor being turned off when vi exits.
18023 cg7900|chromatics|chromatics 7900,
18026 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18027 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18028 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18029 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18030 rmso=\001C1\,\001c2\,,
18031 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18032 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18034 #### Computer Automation
18037 ca22851|computer automation 22851,
18040 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18041 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18042 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18047 # This entry has correct padding and the undocumented "ri" capability
18048 cyb83|xl83|cybernex xl-83,
18051 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18052 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18053 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18054 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18055 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18056 cyb110|mdl110|cybernex mdl-110,
18059 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18060 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18061 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18062 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18063 ht=\011$<43>, ich1=\016A\035$<3.5>,
18064 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18068 # Datapoint is gone. They used to be headquartered in Texas.
18069 # They created ARCnet, an Ethernet competitor that flourished for a while
18070 # in the early 1980s before 3COM got wise and cut its prices. The service
18071 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18074 dp3360|datapoint|datapoint 3360,
18077 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18078 ed=^_, el=^^, home=^], ind=^J,
18080 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18081 # The Datapoint 8242 Workstation was sold at least between 1985
18082 # and 1989. To make the terminal work with this entry, press
18083 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18084 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18085 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18086 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18087 # fact unusable because the strings sent by the terminal conflict
18088 # with other keys).
18089 # The terminal is capable of displaying "box draw" characters.
18090 # For each graphic character you must send 2 ESC's (\E\E) followed
18091 # by a control character as follows:
18092 # character meaning
18093 # ========= =======
18096 # ctrl-G bottom tee
18099 # ctrl-J top left corner
18100 # ctrl-K top right corner
18101 # ctrl-L bottom left corner
18102 # ctrl-M bottom right corner
18103 # ctrl-N horizontal line
18104 # ctrl-O vertical line
18105 # Unfortunately this cannot be fitted into the termcap/terminfo
18106 # description scheme.
18107 dp8242|datapoint 8242,
18110 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18111 cr=^M, cub1=^H, cud1=^J,
18112 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18113 home=^U, ht=^I, il1=\E^T, ind=^C,
18114 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18115 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18116 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18117 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18118 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18119 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18120 smso=\E^E, smul=\E^F,
18121 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18123 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18125 # These entries are DEC's official terminfos for its older terminals.
18126 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18127 # Engineering for more information. Updated terminfos and termcaps
18128 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18134 bel=^G, cr=^M, cub1=^H, cud1=^J,
18138 bel=^G, cr=^M, cub1=^H, cud1=^J,
18142 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18143 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
18147 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18148 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18149 el=\EK, ht=^I, ind=^J, ri=\EI,
18150 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
18151 vt61|vt-61|vt61.5|dec vt61,
18153 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
18154 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
18155 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
18156 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18159 # The gigi does standout with red!
18160 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
18161 gigi|vk100|dec gigi graphics terminal,
18164 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
18165 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18166 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18167 el=\E[K, ht=^I, ind=^J,
18168 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
18169 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
18170 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
18171 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18172 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
18175 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
18176 # a PC differentiated from the IBM clones. It was a total, ludicrous,
18177 # grossly-overpriced failure (among other things, DEC's OS didn't include
18178 # a format program, so you had to buy pre-formatted floppies from DEC at
18179 # a hefty premium!).
18180 pro350|decpro|dec pro console,
18182 cols#80, it#8, lines#24,
18183 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18184 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
18185 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18186 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18187 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
18188 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
18189 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
18194 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
18195 dw2|decwriter|dw|decwriter II,
18198 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
18199 # \E(B Use U.S. character set (otherwise # => british pound !)
18200 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
18201 # \E[w 10 char/in pitch
18202 # \E[1;132 full width horizontal margins
18203 # \E[2g clear all tab stops
18205 # \E[66t 66 lines/page (for \f)
18206 # \E[1;66r full vertical page can be printed
18207 # \E[4g clear vertical tab stops
18208 # \E> disable alternate keypad mode (so it transmits numbers!)
18209 # \E[%i%p1%du set tab stop at column %d (origin == 1)
18210 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
18213 # The dw3 does standout with wide characters.
18215 dw3|la120|decwriter III,
18218 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
18219 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
18220 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
18221 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
18225 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
18226 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
18228 # These aren't official
18229 ln03|dec ln03 laser printer,
18232 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
18233 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
18235 ln03-w|dec ln03 laser printer 132 cols,
18237 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
18238 kcud1=^J, nel=^M^J, use=ln03,
18240 #### Delta Data (dd)
18243 # Untested. The cup sequence is hairy enough that it probably needs work.
18244 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
18245 # There are BSD-derived termcap entries floating around for this puppy
18246 # that are *certainly* wrong.
18247 delta|dd5000|delta data 5000,
18250 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
18251 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
18252 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
18254 #### Digital Data Research (ddr)
18257 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
18258 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
18260 cols#80, it#8, lines#24, vt#3,
18261 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
18262 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
18263 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
18264 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
18265 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
18266 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18267 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
18268 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
18269 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
18270 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18271 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
18274 #### Evans & Sutherland
18277 # Jon Leech <leech@cs.unc.edu> tells us:
18278 # The ps300 was the Evans & Sutherland Picture System 300, a high
18279 # performance 3D vector graphics system with a bunch of specialized hardware.
18280 # Approximate date of release was 1982 (early 80s, anyway), and it had several
18281 # evolutions including (limited) color versions such as the PS330C. PS300s
18282 # were effectively obsolete by the late 80s, replaced by raster graphics
18283 # systems, although specialized applications like molecular modelling
18284 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
18285 # are out of production, though of course E&S is very much alive (in 1996).
18286 # (ps300: changed ":pt@:" to "it@" -- esr)
18288 ps300|Picture System 300,
18291 rmso@, rmul@, smso@, smul@, use=vt100,
18293 #### General Electric (ge)
18296 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
18299 bel=^G, cr=^M, cud1=^J, ind=^J,
18301 #### Heathkit/Zenith
18304 # Here is a description of the H19 DIP switches:
18307 # 0-3 = baud rate as follows:
18312 # 0 1 0 1 1200 baud
18313 # 1 0 0 0 2400 baud
18314 # 1 0 1 0 4800 baud
18315 # 1 1 0 0 9600 baud
18316 # 1 1 0 1 19.2K baud
18318 # 4 = parity (0 = no parity)
18319 # 5 = even parity (0 = odd parity)
18320 # 6 = stick parity (0 = normal parity)
18321 # 7 = full duplex (0 = half duplex)
18324 # 0 = block cursor (0 = underscore cursor)
18325 # 1 = no key click (0 = keyclick)
18326 # 2 = wrap at end of line (0 = no wrap)
18327 # 3 = auto LF on CR (0 = no LF on CR)
18328 # 4 = auto CR on LF (0 = no CR on LF)
18329 # 5 = ANSI mode (0 = VT52 mode)
18330 # 6 = keypad shifted (0 = keypad unshifted)
18331 # 7 = 50Hz refresh (1 = 60Hz refresh)
18333 # Factory Default settings are as follows:
18335 # S401 1 0 0 0 1 1 0 0
18336 # S402 0 0 0 0 0 0 0 0
18337 # (h19: I added <rmam>/<smam> based on the init string;
18338 # also added empty <acsc> to suppress a tic warning -- esr)
18339 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
18340 OTbs, am, mir, msgr,
18341 cols#80, it#8, lines#24,
18342 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
18343 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
18344 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
18345 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
18346 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
18347 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
18348 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
18349 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
18350 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
18351 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
18352 h19-bs|heathkit w/keypad shifted,
18353 rmkx=\Eu, smkx=\Et, use=h19-b,
18354 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
18355 rmkx=\Eu, smkx=\Et, use=h19-u,
18356 # (h19: merged in <ip> from BSDI hp19-e entry>;
18357 # also added empty <acsc> to suppress a tic warning --esr)
18358 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
18359 # Tim tells us that:
18360 # I have an old Zenith-19 terminal at home that still gets a lot of use.
18361 # This terminal suffers from the same famous insert-mode padding lossage
18362 # that has been acknowledged for the Z29 terminal. Emacs is nearly
18363 # unusable on this box, since even a half-scroll up or down the window
18364 # causes flaming terminal death.
18366 # On the Z19, the only way I have found around this problem is to remove
18367 # the :al: and :dl: entries entirely. No amount of extra padding will
18368 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
18369 # makes Emacs a little slower, but it remains in the land of the living.
18371 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
18372 OTbs, am, eslok, hs, mir, msgr,
18373 cols#80, it#8, lines#24,
18374 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
18375 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18376 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
18377 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
18378 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18379 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
18380 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
18381 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18382 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
18383 h19-u|heathkit with underscore cursor,
18384 cnorm@, cvvis@, use=h19-b,
18385 h19-g|h19g|heathkit w/block cursor,
18386 cnorm=\Ex4, cvvis@, use=h19-b,
18387 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
18389 dl1=\EM, il1=\EL, use=h19,
18391 # The major problem with the Z29 is that it requires more padding than the Z19.
18393 # The problem with declaring an H19 to be synonymous with a Z29 is that
18394 # it needs more padding. It especially loses if a program attempts
18395 # to put the Z29 into insert mode and insert text at 9600 baud. It
18396 # even loses worse if the program attempts to insert tabs at 9600
18397 # baud. Adding padding to text that is inserted loses because in
18398 # order to make the Z29 not die, one must add so much padding that
18399 # whenever the program tries to use insert mode, the effective
18400 # rate is about 110 baud.
18402 # What program would want to put the terminal into insert mode
18403 # and shove stuff at it at 9600 baud you ask?
18405 # Emacs. Emacs seems to want to do the mathematically optimal
18406 # thing in doing a redisplay rather than the practical thing.
18407 # When it is about to output a line on top of a line that is
18408 # already on the screen, instead of just killing to the end of
18409 # the line and outputting the new line, it compares the old line
18410 # and the new line and if there are any similarities, it
18411 # constructs the new line by deleting the text on the old line
18412 # on the terminal that is already there and then inserting new
18413 # text into the line to transform it into the new line that is
18414 # to be displayed. The Z29 does not react kindly to this.
18416 # But don't cry for too long.... There is a solution. You can make
18417 # a termcap entry for the Z29 that says the Z29 has no insert mode.
18418 # Then Emacs cannot use it. "Oh, no, but now inserting into a
18419 # line will be really slow", you say. Well there is a sort of a
18420 # solution to that too. There is an insert character option on
18421 # the Z29 that will insert one character. Unfortunately, it
18422 # involves putting the terminal into ansi mode, inserting the
18423 # character, and changing it back to H19 mode. All this takes 12
18424 # characters. Pretty expensive to insert one character, but it
18425 # works. Either Emacs doesn't try to use its inserting hack when
18426 # it's only given an insert character ability or the Z29 doesn't
18427 # require padding with this (the former is probably more likely,
18428 # but I haven't checked it out).
18429 # (z29: added empty <acsc> to suppress a tic warning, merged in
18430 # status line capabilities from BRL entry --esr)
18431 z29|zenith29|z29b|zenith z29b,
18432 OTbs, OTpt, am, eslok, hs, mir, msgr,
18433 OTkn#10, cols#80, lines#24,
18434 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
18435 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18436 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
18437 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
18438 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
18439 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
18440 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18441 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
18442 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
18443 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
18444 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
18445 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18446 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
18447 # the world is stable. <rs1> causes the terminal to be reset to the state
18448 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
18449 # cursor, bc -> block cursor.
18450 # From: Mike Meyers
18451 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
18452 # looks vt100-compatible -- esr)
18453 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
18454 OTbs, OTpt, am, eslok, hs, mir, msgr,
18455 OTkn#10, cols#80, it#8, lines#24,
18456 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
18457 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18458 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18459 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18460 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18461 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
18462 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
18463 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
18464 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
18465 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18466 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
18467 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
18468 rmso=\E[m, rmul=\E[m,
18469 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
18470 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
18471 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
18472 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
18473 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
18475 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
18476 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
18478 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
18479 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
18481 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
18482 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
18483 am, eslok, hs, mc5i, mir, msgr, xon,
18485 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18486 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
18487 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
18488 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18489 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18490 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18491 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18492 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
18493 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
18494 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
18495 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
18496 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
18497 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18498 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
18499 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
18500 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
18501 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
18502 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18503 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
18505 # From: Brad Brahms <Brahms@USC-ECLC>
18506 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
18507 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
18508 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
18509 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
18510 OTbs, OTpt, mir, msgr,
18511 OTkn#10, cols#80, it#8, lines#24,
18512 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
18513 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
18514 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
18515 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
18516 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
18517 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
18518 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
18519 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18520 smir=\E@, smso=\Ep,
18521 p19|h19-b with il1/dl1,
18522 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
18523 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
18524 # (ztx: removed duplicate :sr: -- esr)
18525 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
18526 OTbs, am, eslok, hs,
18527 cols#80, it#8, lines#24,
18528 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
18529 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18530 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
18531 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
18532 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
18533 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
18534 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
18535 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18537 #### IMS International (ims)
18539 # There was a company called IMS International located in Carson City,
18540 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
18541 # bus/Z80 hardware and a line of terminals called Ultimas.
18544 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
18545 ims950-b|bare ims950 no init string,
18547 # (ims950: removed obsolete ":ko@:" -- esr)
18548 ims950|ims televideo 950 emulation,
18550 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18551 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
18552 # (ims950-rv: removed obsolete ":ko@:" -- esr)
18553 ims950-rv|ims tvi950 rev video,
18555 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18556 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
18557 ims-ansi|ultima2|ultimaII|IMS Ultima II,
18559 cols#80, it#8, lines#24,
18560 clear=\E[H\E[2J, cub1=^H, cud1=\ED,
18561 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
18562 ht=^I, if=/usr/share/tabset/vt100,
18563 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
18564 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
18565 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
18568 #### Intertec Data Systems
18570 # I think this company is long dead as of 1995. They made an early CP/M
18571 # micro called the "Intertec Superbrain" that was moderately popular,
18572 # then sank out of sight.
18575 superbrain|intertec superbrain,
18578 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
18579 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
18580 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
18581 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
18582 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
18583 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
18584 # and the reverse is actually true. Try it. -- esr)
18585 intertube|intertec|Intertec InterTube,
18588 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
18589 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
18590 ind=^J, rmso=\E0@, smso=\E0P,
18591 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
18592 # are typing and a command comes in, the keystrokes you type get interspersed
18593 # with the command and it messes up
18594 intertube2|intertec data systems intertube 2,
18596 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
18597 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
18598 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
18600 #### Ithaca Intersystems
18602 # This company made S100-bus personal computers long ago in the pre-IBM-PC
18603 # past. They used to be reachable at:
18605 # Ithaca Intersystems
18606 # 1650 Hanshaw Road
18607 # Ithaca, New York 14850
18609 # However, the outfit went bankrupt years ago.
18612 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
18613 # These entries were written (originally in termcap syntax) by Brian Yandell
18614 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
18615 # University of Wisconsin.
18617 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
18618 # removed <if=/usr/share/tabset/init.graphos> and
18619 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
18620 graphos|graphos III,
18622 cols#80, it#8, lines#24,
18623 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
18624 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18625 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18626 cuu=\E[%p1%dA, cuu1=\E[A,
18627 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
18628 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
18629 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18630 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
18631 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
18632 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
18633 smir=\E[4h, smso=\E[7m,
18634 graphos-30|graphos III with 30 lines,
18636 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
18640 # These people used to be reachable at:
18643 # 1393 Main Street,
18644 # Waltham, MA 02154
18645 # Vox: (617)-890-5796.
18647 # However, if you call that number today you'll get an insurance company.
18648 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
18649 # 26 Feb 1997 that says:
18651 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
18652 # for ~7 years. Modgraph still in business. Products are rugged laptop and
18653 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
18654 # panel-mount etc). I can be emailed at sonfour@aol.com
18656 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
18657 # dated 1984. According to the manual, it featured Tek 4010/4014
18658 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
18661 modgraph|mod24|modgraph terminal emulating vt100,
18664 cvvis=\E\^9;0s\E\^7;1s,
18665 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
18666 rf@, ri=\EM\E[K$<5/>, use=vt100,
18667 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
18668 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
18670 cols#80, it#8, lines#24,
18671 clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
18672 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
18673 ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
18674 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
18677 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
18678 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
18679 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
18680 # mark and using delete-to-killbuffer work correctly. However, we would
18681 # like normal mode of operation to be using a Modgraph with 48 line setting.
18682 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
18683 # the setting mark and delete-to-killbuffer results in the deletion of only
18684 # the line the mark is set on.
18685 # We've discovered that the delete-to-killbuffer works correctly
18686 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
18687 # the first line disappears but a ctrl-l shows that it did work
18689 modgraph48|mod|Modgraph w/48 lines,
18690 OTbs, OTpt, am, xenl,
18691 cols#80, it#8, lines#48, vt#3,
18692 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
18693 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
18694 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
18695 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
18696 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
18697 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18698 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
18699 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18700 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
18701 smso=\E[7m, smul=\E[4m,
18703 #### Morrow Designs
18705 # This was George Morrow's company. They started in the late 1970s making
18706 # S100-bus machines. They used to be reachable at:
18709 # 600 McCormick St.
18710 # San Leandro, CA 94577
18712 # but they're long gone now (1995).
18715 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
18716 # Jeff's specimen was dated June 1984.
18717 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
18718 mt70|mt-70|Morrow MD-70; native Morrow mode,
18719 am, mir, msgr, xon,
18720 cols#80, it#8, lines#24,
18721 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
18722 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
18723 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
18724 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
18725 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
18726 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
18727 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
18728 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
18729 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
18730 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
18731 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18732 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
18733 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
18734 smul=\EG1, tbc=\E0, use=adm+sgr,
18739 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
18741 ex155|Motorola Exorterm 155,
18743 OTkn#5, OTug#1, cols#80, lines#24,
18744 cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
18745 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
18746 home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
18747 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
18748 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
18752 # This company is still around in 1995, manufacturing point-of-sale systems.
18754 omron|Omron 8025AG,
18757 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
18758 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
18759 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
18763 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
18764 # were competition for things like the Tektronics 4025.
18767 # Ramtek 6221 from BRL, probably by Doug Gwyn
18768 # The following SET-UP modes are assumed for normal operation:
18769 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
18770 # NEWLINE_OFF 80_COLUMNS
18771 # Other SET-UP modes may be set for operator convenience or communication
18772 # requirements; I recommend
18773 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
18774 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
18775 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
18776 # Note that the Control-E key is useless on this brain-damaged terminal. No
18777 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18778 rt6221|Ramtek 6221 80x24,
18779 OTbs, OTpt, msgr, xon,
18780 OTkn#4, cols#80, it#8, lines#24, vt#3,
18781 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
18782 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
18783 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18784 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
18785 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
18786 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
18787 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18788 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
18789 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
18790 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
18791 rmso=\E[m, rmul=\E[m,
18792 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
18793 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
18794 smul=\E[4m, tbc=\E[3g,
18795 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
18796 rt6221-w|Ramtek 6221 160x48,
18797 cols#160, lines#48,
18798 ll=\E[48;1H, use=rt6221,
18803 # RCA VP3301 or VP3501
18804 rca|rca vp3301/vp3501,
18807 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18808 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
18814 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
18815 # The following SET-UP modes are assumed for normal operation:
18816 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
18817 # ONLINE ANSI CURSOR_VISIBLE
18818 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
18819 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
18820 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
18821 # For use with graphics software, all graphics modes should be set to factory
18822 # default. Other SET-UP modes may be set for operator convenience or
18823 # communication requirements. No delays are specified; use "stty ixon -ixany"
18824 # to enable DC3/DC1 flow control!
18825 # I commented out the scrolling capabilities since they are too slow.
18826 hirez100|Selanar HiREZ-100,
18827 OTbs, OTpt, mir, msgr, xon,
18828 OTkn#4, cols#80, it#8, lines#48, vt#3,
18829 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
18830 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18831 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18832 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
18833 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18834 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
18835 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
18836 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
18837 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
18838 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
18839 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18840 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
18841 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
18842 smul=\E[4m, tbc=\E[3g,
18843 hirez100-w|Selanar HiREZ-100 in 132-column mode,
18844 cols#132, use=hirez100,
18849 # From University of Wisconsin
18850 vsc|Signetics Vsc Video driver by RMC,
18852 cols#80, it#8, lines#26,
18853 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
18854 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18855 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
18856 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
18860 # Alan Frisbie <frisbie@flying-disk.com> writes:
18862 # As you may recall, the Soroc logo consisted of their name,
18863 # with the letter "S" superimposed over an odd design. This
18864 # consisted of a circle with a slightly smaller 15 degree (approx.)
18865 # wedge with rounded corners inside it. The color was sort of
18866 # a metallic gold/yellow.
18868 # If I had been more of a beer drinker it might have been obvious
18869 # to me, but it took a clue from their service department to make
18870 # me exclaim, "Of course!" The circular object was the top of
18871 # a beer can (the old removable pop-top style) and "Soroc" was an
18872 # anagram for "Coors".
18874 # I can just imagine the founders of the company sitting around
18875 # one evening, tossing back a few and trying to decide what to
18876 # call their new company and what to use for a logo.
18879 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
18880 soroc120|iq120|soroc|soroc iq120,
18881 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
18882 kcuf1=^L, kcuu1=^K, use=adm3a,
18883 soroc140|iq140|soroc iq140,
18886 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18887 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
18888 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
18889 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
18890 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18891 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
18892 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
18894 #### Southwest Technical Products
18896 # These guys made an early personal micro called the M6800.
18897 # The ct82 was probably its console terminal.
18900 # (swtp: removed obsolete ":bc=^D:" -- esr)
18901 swtp|ct82|southwest technical products ct82,
18904 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
18905 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
18906 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
18907 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
18908 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
18912 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
18914 # Synertek used to make ICs, various 6502-based single-board process
18915 # control and hobbyist computers, and assorted peripherals including a
18916 # series of small inexpensive terminals (I think they were one of the
18917 # first to have a "terminal-on-a-keyboard", where the terminal itself
18918 # was only slightly larger than the keyboard).
18920 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
18921 # was a 40x24 terminal that could connect to a standard TV through a
18922 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
18923 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
18924 # I have a KTM-2/80 still in working order. The KTM-2s had fully
18925 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
18926 # ROM and 2 ROMs as character generators. They were incredibly simple,
18927 # and I've never had any problems with mine (witness the fact that mine
18928 # was made in 1981 and is still working great... I've blown the video
18929 # output transistor a couple of times, but it's a 2N2222 :-)
18931 # The KTM-3 (which is what is listed in the terminfo file) was their
18932 # attempt at putting a KTM-2 in a box (and some models came with a
18933 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
18934 # control and escape sequences are very different. The KTM-3 was always
18935 # real broken, at least according to the folks I've talked to about it.
18937 # The padding in the entry is probably off--these terminals were very
18938 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
18939 # anyone with any sanity replaced the ROMs with something that provided
18940 # a reasonable subset of VT100 functionality, since the usual ROMs were
18941 # obviously very primitive... oh, you could get an upgraded ROM from
18942 # Synertek for some incredible amount of money, but what hacker with an
18943 # EPROM burner would do that? :)
18945 # Sorry I don't have any contact info; I believe they were located in
18946 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
18947 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
18948 # business these days.
18951 # Tested, seems to work fine with vi.
18952 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
18955 clear=^Z, cub1=^H, cuf1=^L,
18956 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
18958 #### Tab Office Products
18960 # TAB Products Co. - Palo Alto, California
18961 # Electronic Office Products,
18962 # 1451 California Avenue 94304
18964 # I think they're out of business.
18967 # The tab 132 uses xon/xoff, so no padding needed.
18968 # <smkx>/<rmkx> have nothing to do with arrow keys.
18969 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
18970 # Seems to be no way to get rid of status line.
18971 # The manual for this puppy was dated June 1981. It claims to be VT52-
18972 # compatible but looks more vt100-like.
18973 tab132|tab|tab132-15|tab 132/15,
18975 OTdN@, cols#80, lines#24, lm#96,
18976 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
18977 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
18978 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
18979 tab132-w|tab132 in wide mode,
18981 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
18982 tab132-rv|tab132 in reverse-video mode,
18983 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
18984 tab132-w-rv|tab132 in reverse-video/wide mode,
18985 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
18990 # Research Incorporated
18991 # 6425 Flying Cloud Drive
18992 # Eden Prairie, MN 55344
18993 # Vox: (612)-941-3300
18995 # The Teleray terminals were all discontinued in 1992-93. RI still services
18996 # and repairs these beasts, but no longer manufactures them. The Teleray
18997 # people believe that all the types listed below are very rare now (1995).
18998 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
18999 # Model 100) that were ANSI-compatible.
19001 # Note two things called "teleray". Reorder should move the common one
19002 # to the front if you have either. A dumb teleray with the cursor stuck
19003 # on the bottom and no obvious model number is probably a 3700.
19006 t3700|dumb teleray 3700,
19009 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19010 t3800|teleray 3800 series,
19012 cols#80, it#8, lines#24,
19013 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19014 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19015 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19016 t1061|teleray|teleray 1061,
19017 OTbs, am, km, xhp, xt,
19018 cols#80, it#8, lines#24, xmc#1,
19019 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19020 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19021 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19022 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19023 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19024 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19025 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19027 t1061f|teleray 1061 with fast PROMs,
19028 dl1=\EM, il1=\EL, ip@, use=t1061,
19029 # "Teleray Arpa Special", officially designated as
19030 # "Teleray Arpa network model 10" with "Special feature 720".
19031 # This is the new (1981) fast microcode updating the older "arpa" proms
19032 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19033 # converts the keypad to programmable function keys, and has other goodies.
19034 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19035 # programs handle such lossage properly.
19036 # Note: this is NOT the old termcap's "t1061f with fast proms."
19037 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19038 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19039 t10|teleray 10 special,
19041 cols#80, it#8, lines#24, xmc#2,
19042 clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
19043 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19044 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19045 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19047 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19048 # back/forth words. Put the function keys (f1-f10) where they can be
19049 # found, and turn off the other magic keys along the top row, except
19050 # for line/local. Do the magic appropriate to make the page shifts work.
19051 # Also toggle ^S/^Q for those of us who use Emacs.
19053 am, da, db, mir, xhp, xt,
19055 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19056 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19057 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19058 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19059 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19060 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19061 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19062 smso=\E[7m, smul=\E[4m,
19064 #### Texas Instruments (ti)
19067 # The Silent 700 was so called because it was built around a quiet thermal
19068 # printer. It was portable, equipped with an acoustic coupler, and pretty
19069 # neat for its day.
19070 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19073 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19076 # Texas Instruments 916 VDT 7 bit control mode
19078 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19080 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19081 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19082 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19083 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19084 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19085 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19086 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19087 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19088 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19089 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19090 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19091 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19092 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19093 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19096 # Texas Instruments 916 VDT 8 bit control mode
19098 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19099 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19100 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19101 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19102 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19103 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19104 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19106 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19108 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19109 cols#132, use=ti916,
19111 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19113 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19114 cols#132, use=ti916-8,
19115 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19117 cols#80, it#8, lines#24,
19118 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19119 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19120 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19121 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19122 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19123 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19124 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19125 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19126 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19127 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19128 smul=\E[4m, tbc=\E[3g,
19129 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19131 cols#80, it#8, lines#24,
19132 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19133 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19134 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19135 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19136 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19137 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19138 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
19139 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
19140 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
19141 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
19142 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19143 smul=\E[4m, tbc=\E[3g,
19144 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
19145 cols#132, use=ti924,
19146 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
19147 cols#132, use=ti924-8,
19148 ti931|Texas Instruments 931 VDT,
19151 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
19152 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19153 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
19154 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
19155 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19156 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
19157 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
19158 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
19159 sgr0=\E4@, smso=\E4A, smul=\E4D,
19160 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
19161 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19162 # (ti926-8: I corrected this from the broken SCO entry -- esr)
19163 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
19164 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19165 ti_ansi|basic entry for ti928,
19166 am, bce, eo, xenl, xon,
19167 colors#8, cols#80, it#8, lines#25, pairs#64,
19168 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
19169 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19170 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19171 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19172 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19173 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
19174 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
19175 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
19176 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
19177 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
19178 smso=\E[7m, smul=\E[4m,
19180 # 928 VDT 7 bit control mode
19182 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
19183 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
19184 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
19185 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
19186 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
19187 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
19189 # 928 VDT 8 bit control mode
19191 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
19192 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
19193 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
19194 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
19195 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
19196 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
19197 kpp=\233T, kprt=\23335~, use=ti_ansi,
19202 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
19203 # had just <smso>=\EG6 which I think means standout was supposed to be
19204 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
19205 # <invis> might work-- esr)
19206 zen30|z30|zentec 30,
19209 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19210 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19211 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
19212 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
19213 smul@, use=adm+sgr,
19214 # (zen50: this had extension capabilities
19215 # :BS=^U:CL=^V:CR=^B:
19216 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
19217 # which were also in the original entry -- esr)
19218 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
19219 zen50|z50|zentec zephyr,
19221 cols#80, lines#24, xmc#1,
19222 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
19223 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
19224 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
19225 rmul@, smul@, use=adm+sgr,
19227 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
19228 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
19231 blink=\EM", clear=\EH\EJ, cnorm=\EP,
19232 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
19233 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19234 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
19235 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
19236 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
19237 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
19238 smso=\EM$, smul=\EM0,
19240 ######## OBSOLETE UNIX CONSOLES
19243 #### Apollo consoles
19245 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
19246 # labeled HP700s now.
19249 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
19250 apollo|apollo console,
19253 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
19254 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
19255 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
19256 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
19257 smso=\ES, smul=\EU, vpa=\EO+\s,
19259 # We don't know whether or not the apollo guys replicated DEC's firmware bug
19260 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
19261 # both these capabilities.
19262 apollo_15P|apollo 15 inch display,
19263 rmir@, smir@, use=vt132,
19264 apollo_19L|apollo 19 inch display,
19265 rmir@, smir@, use=vt132,
19266 apollo_color|apollo color display,
19267 rmir@, smir@, use=vt132,
19269 #### Convergent Technology
19271 # Burroughs bought Convergent shortly before it merged with Univac.
19272 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
19273 # from 1991 or earlier).
19276 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
19277 # (aws: removed unknown :dn=^K: -- esr)
19278 aws|Convergent Technologies AWS workstation under UTX and Xenix,
19280 OTug#0, cols#80, lines#28, xmc#0,
19281 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
19282 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
19283 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
19284 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
19285 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
19286 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
19288 awsc|Convergent Technologies AWS workstation under CTOS,
19290 OTug#0, cols#80, lines#24, xmc#0,
19291 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
19292 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
19293 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
19294 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
19300 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
19301 # The digital uVax II's had a graphic display called a qdss. It was
19302 # supposed to be a high performance graphic accelerator, but it was
19303 # late to market and barely appeared before faster dumb frame buffers
19304 # appeared. I have only used this display while running X11. However,
19305 # during bootup, it was in text mode, and probably had a terminal emulator
19306 # within it. And that is what your termcap entry is for. In graphics
19307 # mode the screen size is 1024x864 pixels.
19308 qdss|qdcons|qdss glass tty,
19310 cols#128, lines#57,
19311 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
19312 cup=\E=%p1%c%p2%c, cuu1=^K,
19314 #### Fortune Systems consoles
19316 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
19317 # in their day; I (esr) used one myself for a year or so around 1984.
19318 # They had no graphics, though, and couldn't compete against Suns and
19322 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
19323 # (This had extension capabilities
19324 # :rv=\EH:re=\EI:rg=0:GG=0:\
19325 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
19326 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
19327 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
19328 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
19329 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
19330 # to force both magic cookie glitches off. Once upon a time, I
19331 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
19332 # function keys; thus the "Al" value for HM was certainly an error. I renamed
19333 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
19334 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
19335 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
19336 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
19337 fos|fortune|Fortune system,
19340 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
19341 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
19342 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
19343 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
19344 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
19345 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
19346 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
19347 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
19348 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
19349 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
19350 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
19351 smso=^\H`, smul=^\HP,
19353 #### Masscomp consoles
19355 # Masscomp has gone out of business. Their product line was purchased by
19356 # comany in Georgia (US) called "XS International", parts and service may
19357 # still be available through them.
19360 # (masscomp: ":MT:" changed to ":km:"; -- esr)
19361 masscomp|masscomp workstation console,
19363 cols#80, it#8, lines#24,
19364 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
19365 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19366 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
19367 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
19368 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
19369 masscomp1|masscomp large screen version 1,
19370 cols#104, lines#36, use=masscomp,
19371 masscomp2|masscomp large screen version 2,
19372 cols#64, lines#21, use=masscomp,
19374 ######## OTHER OBSOLETE TYPES
19376 # These terminals are *long* dead -- these entries are retained for
19377 # historical interest only.
19380 #### Obsolete non-ANSI software emulations
19383 # CTRM terminal emulator
19384 # 1. underlining is not allowed with colors: first, is is simulated by
19385 # black on white, second, it disables background color manipulations.
19386 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
19387 # so we have to save their status in the static registers A, B and H
19388 # respectively, to be able to restore them when color changes
19389 # (because any color change turns off ALL attributes)
19390 # 3. <bold> and <rev> sequences alternate modes,
19391 # rather than simply entering them. Thus we have to check the
19392 # static register B and H to determine the status, before sending the
19394 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
19395 # and then reset colors
19396 # 5. implementation of the protect mode would badly penalize the performance.
19397 # we would have to use \E&bn sequence to turn off colors (as well as all
19398 # other attributes), and keep the status of protect mode in yet another
19399 # static variable. If someone really needs this mode, they would have to
19400 # create another terminfo entry.
19401 # 6. original color-pair is white on black.
19402 # store the information about colors into static registers
19403 # 7. set foreground color. it performs the following steps.
19404 # 1) turn off all attributes
19405 # 2) turn on the background and video attributes that have been turned
19406 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
19407 # 3) turn on foreground attributes
19408 # 4) store information about foreground into U,V,W static registers
19409 # 8. turn on background: similar to turn on foreground above
19410 ctrm|C terminal emulator,
19412 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
19413 pairs#63, pb#19200, vt#6,
19414 bel=^G, blink=\E&dA%{1}%PA,
19415 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
19416 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19417 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
19418 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
19419 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
19420 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
19421 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
19422 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
19423 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
19424 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
19425 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
19426 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
19427 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
19428 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
19429 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
19431 # gs6300 - can't use blue foreground, it clashes with underline;
19432 # it's simulated with cyan
19433 # Bug: The <op> capability probably resets attributes.
19434 # (gs6300: commented out <rmln> (no <smln>) --esr)
19435 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
19436 am, bce, msgr, xon,
19437 colors#8, cols#80, it#8, lines#24, pairs#63,
19438 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19439 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
19440 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19441 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19442 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19443 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19444 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
19445 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
19446 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
19447 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
19448 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
19449 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
19450 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
19451 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
19453 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
19454 # MS-Kermit with Heath-19 emulation mode enabled
19455 # (h19k: changed ":pt@:" to ":it@"
19456 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
19461 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
19462 # Software (formerly Peripherals Computers & Supplies, Inc) of
19463 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
19464 # also be reached at support@synergy.com.
19465 versaterm|versaterm vt100 emulator for the macintosh,
19467 cols#80, it#8, lines#24,
19468 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19469 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
19470 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
19471 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
19472 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
19473 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
19474 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
19475 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
19476 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
19477 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
19478 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
19479 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
19482 # From: Rick Thomas <ihnp4!btlunix!rbt>
19483 # (xtalk: I added <rmam>/<smam> based on the init string.
19484 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
19485 am, mir, msgr, xon,
19486 cols#80, it#8, lines#24, vt#3, xmc#1,
19487 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19488 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
19489 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19490 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19491 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
19492 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
19493 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
19494 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19495 rmkx=\E[?1l\E>, rmso=\E[m\s,
19496 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
19497 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
19498 tbc=\E[3g, use=vt100+fnkeys,
19500 # The official PC terminal emulator program of the AT&T Product Centers.
19501 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
19502 simterm|attpc running simterm,
19505 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19506 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
19507 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
19508 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
19510 #### Daisy wheel printers
19512 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
19513 # wheel terminals. These are now largely obsolete.
19516 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
19517 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
19520 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
19521 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
19522 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
19524 is2=\r \E9, use=diablo1620,
19525 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
19526 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
19527 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
19529 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
19531 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
19533 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
19534 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
19536 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
19537 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
19538 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
19539 # If no tab is set or the terminal's in a bad mood, it glitches the screen
19540 # around all of memory. Note that return puts a blank ("a return character")
19541 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
19542 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
19543 # curses won't work (some old BSD versions) because it doesn't clear this bit,
19544 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
19545 # I have been unable to get tabs set in all 96 lines - it always leaves at
19546 # least one line with no tabs in it, and once you tab through that line,
19547 # it completely weirds out.
19548 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
19551 cols#80, lines#24, lm#96,
19552 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
19553 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
19554 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
19555 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
19556 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
19560 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19561 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19562 gsi|mystery gsi terminal,
19565 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
19567 aj830|aj832|aj|anderson jacobson,
19569 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
19571 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
19572 aj510|Anderson-Jacobson model 510,
19575 clear=^L, cub1=^H, cuf1=\EX,
19576 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
19577 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
19578 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
19579 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
19580 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
19582 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
19583 # This is incomplete, but it's a start.
19584 nec5520|nec|spinwriter|nec 5520,
19587 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
19588 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
19590 qume5|qume|Qume Sprint 5,
19593 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19594 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19595 # I suspect the xerox 1720 is the same as the diablo 1620.
19596 xerox1720|x1720|x1750|xerox 1720,
19599 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
19602 #### Miscellaneous obsolete terminals, manufacturers unknown
19604 # If you have any information about these (like, a manufacturer's name,
19605 # and a date on the serial-number plate) please send it!
19607 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
19610 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
19611 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
19614 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
19615 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
19616 kf4=\E8, rmso=\Em^C, smso=\Em^L,
19617 cops10|cops|cops-10|cops 10,
19620 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19621 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
19622 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
19624 # (d132: removed duplicate :ic=\E5:,
19625 # merged in capabilities from a BRL entry -- esr)
19626 d132|datagraphix|datagraphix 132a,
19629 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
19630 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
19631 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
19632 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
19633 # The d800 was an early portable terminal from c.1984-85 that looked a lot
19634 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
19635 # mode (which is what this entry looks like) and several other lesser-known
19638 OTbs, am, da, db, msgr, xhp,
19639 cols#80, it#8, lines#24,
19640 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
19641 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
19642 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19643 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
19644 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
19645 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
19646 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19647 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
19648 digilog|digilog 333,
19651 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
19653 # The DWK was a terminal manufactured in the Soviet Union c.1986
19654 dwk|dwk-vt|dwk terminal,
19656 cols#80, it#8, lines#24,
19657 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
19658 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19659 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
19660 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
19661 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
19662 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
19663 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
19664 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
19665 sgr0=\EX, smacs=\EF, smso=\ET,
19666 env230|envision230|envision 230 graphics terminal,
19668 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
19669 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
19671 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
19672 # coupler attached, the whole rig fitting in a suitcase and more or less
19673 # portable. Hot stuff for c.1977 :-) -- esr
19674 ep48|ep4080|execuport 4080,
19677 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
19678 ep40|ep4000|execuport 4000,
19679 cols#136, use=ep4080,
19680 # Adam Thompson <athompso@pangea.ca> tells us:
19681 # Informer series - these are all portable units, resembling older
19682 # automatic bread-baking machines. The terminal looks like a `clamshell'
19683 # design, but isn't. The structure is similar to the Direct terminals,
19684 # but only half the width. The entire unit is only about 10" wide.
19685 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
19686 # keyboard. All the keys are crammed together, much like some laptop
19687 # PCs today, but perhaps less well organized...all these units have a
19688 # bewildering array of plugs on the back, including a built-in modem.
19689 # The 305 was a color version of the 304; the 306 and 307 were mono and
19690 # color terminals built for IBM bisync protocols.
19691 # From: Paul Leondis <unllab@amber.berkeley.edu>
19692 ifmr|Informer D304,
19695 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
19696 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
19697 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
19699 # Entry largely based on wy60 and has the features of wy60ak.
19700 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
19701 am, bw, hs, km, mir, msgr, ul, xon,
19702 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
19703 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19704 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
19705 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
19706 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
19707 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
19708 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
19710 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
19711 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
19712 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
19713 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
19714 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19715 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19716 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19717 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
19718 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
19719 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
19720 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
19721 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
19722 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
19723 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
19724 rs3=\EwG\Ee($<150>,
19725 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
19726 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
19727 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
19728 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
19729 uc=\EG8\EG0, use=adm+sgr,
19730 teletec|Teletec Datascreen,
19733 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
19735 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
19736 # This description is for the LANPAR Technologies VISION 3220
19737 # terminal from 1984/85. The function key definitions k0-k5 represent the
19738 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
19739 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
19741 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
19742 # I had a couple of scopes (3221) like this once where I used to work, around
19743 # the 1987 time frame if memory serves me correctly. These scopes were made
19744 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
19745 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
19746 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
19747 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
19748 # (3221) cost about $1500 each, and one was always broken -- had to be sent
19749 # back to the shop for repairs.
19750 # The only real advantage these scopes had over the VT-240's were:
19751 # 1) They were faster in the Regis display, or at least the ones I did
19752 # 2) They had a handy debugging feature where you could split-screen the
19753 # scope, the graphics would appear on the top, and the REGIS commands would
19754 # appear on the bottom. I don't remember the VT-240s being able to do that.
19755 # I would swear that LANPAR Technologies was in MA someplace, but since I
19756 # don't work at the same place anymore, and those terminals and manuals were
19757 # long since junked, I cannot be any more sure than that.
19759 # (v3220: removed obsolete ":kn#10:",
19760 # I added <rmam>/<smam> based on the init string -- esr)
19761 v3220|LANPAR Vision II model 3220/3221/3222,
19762 OTbs, am, mir, xenl,
19763 cols#80, it#8, lines#24,
19764 clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
19765 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19766 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
19767 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
19768 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
19769 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
19770 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
19771 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19772 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
19773 ######## ICH/ICH1 VERSUS RMIR/SMIR
19775 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
19776 # are present; the symptom is doubled characters in an update using insert.
19777 # These applications are technically correct; in both 4.3BSD termcap and
19778 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
19779 # unless the terminal needs both. To my knowledge, no terminal still in this
19780 # file requires both other than the very obsolete dm2500.
19782 # For ncurses-based applications this is not a problem, as ncurses uses
19783 # one or the other as appropriate but never mixes the two. Therefore we
19784 # have not corrected entries like `linux' and `xterm' that specify both.
19785 # If you see doubled characters from these, use the linux-nic and xterm-nic
19786 # entries that suppress ich/ich1. And upgrade to ncurses!
19789 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
19791 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
19792 # ECMA-48 standards are said to be almost identical, but are not the same
19793 # as X3.64 (though for practical purposes they are close supersets of it).
19795 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
19796 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
19797 # Coded Character Sets"), include your snail-mail address, and you should
19798 # receive the document in due course. Don't expect an email acknowledgement.
19800 # Related standards include "X3.4-1977: American National Standard Code for
19801 # Information Interchange" (the ASCII standard) and "X3.41.1974:
19802 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
19803 # American National Standard for Information Interchange." I believe (but
19804 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
19808 #### VT100/ANSI/ECMA-48
19810 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
19811 # and ECMA-48 Control Functions for Coded Character Sets.
19813 # Much of the content of this comment is adapted from a table prepared by
19814 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
19815 # discussion of some terminfo-related issues, and updates to capture ECMA-48
19816 # have been added. Control functions described in ECMA-48 only are tagged
19817 # with * after their names.
19819 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
19820 # sequences. In the main table, \E stands for an escape (\033) character,
19821 # SPC for space. Pn stands for a single numeric parameter to be inserted
19822 # in decimal ASCII. Ps stands for a list of such parameters separated by
19823 # semicolons. Parameter meanings for most parametrized sequences are
19824 # decribed in the notes.
19826 # Sequence Sequence Parameter or
19827 # Mnemonic Name Sequence Value Mode terminfo
19828 # -----------------------------------------------------------------------------
19829 # APC Applicatn Program Command \E _ - Delim -
19830 # BEL Bell * ^G - - bel
19831 # BPH Break Permitted Here * \E B - * -
19832 # BS Backpace * ^H - EF -
19833 # CAN Cancel * ^X - - - (A)
19834 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
19835 # CCH Cancel Previous Character \E T - - -
19836 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
19837 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
19838 # CMD Coding Method Delimiter * \E
19839 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
19840 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
19841 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
19842 # CSI Control Sequence Intro \E [ - Intro -
19843 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
19844 # CUB Cursor Backward \E [ Pn D 1 eF cub
19845 # CUD Cursor Down \E [ Pn B 1 eF cud
19846 # CUF Cursor Forward \E [ Pn C 1 eF cuf
19847 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
19848 # CUU Cursor Up \E [ Pn A 1 eF cuu
19849 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
19850 # DA Device Attributes \E [ Pn c 0 - -
19851 # DAQ Define Area Qualification \E [ Ps o 0 - -
19852 # DCH Delete Character \E [ Pn P 1 eF dch
19853 # DCS Device Control String \E P - Delim -
19854 # DL Delete Line \E [ Pn M 1 eF dl
19855 # DLE Data Link Escape * ^P - - -
19856 # DMI Disable Manual Input \E \ - Fs -
19857 # DSR Device Status Report \E [ Ps n 0 - - (I)
19858 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
19859 # EA Erase in Area \E [ Ps O 0 eF - (J)
19860 # ECH Erase Character \E [ Pn X 1 eF ech
19861 # ED Erase in Display \E [ Ps J 0 eF ed (J)
19862 # EF Erase in Field \E [ Ps N 0 eF -
19863 # EL Erase in Line \E [ Ps K 0 eF el (J)
19864 # EM End of Medium * ^Y - - -
19865 # EMI Enable Manual Input \E b Fs -
19866 # ENQ Enquire ^E - - -
19867 # EOT End Of Transmission ^D - * -
19868 # EPA End of Protected Area \E W - - - (K)
19869 # ESA End of Selected Area \E G - - -
19870 # ESC Escape ^[ - - -
19871 # ETB End Transmission Block ^W - - -
19872 # ETX End of Text ^C - - -
19873 # FF Form Feed ^L - - -
19874 # FNK Function Key * \E [ Pn SPC W - - -
19875 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
19876 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
19877 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
19878 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
19879 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
19880 # HPB Char Position Backward \E [ j 1 FE -
19881 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
19882 # HT Horizontal Tab * ^I - FE - (N)
19883 # HTJ Horz Tab w/Justification \E I - FE -
19884 # HTS Horizontal Tab Set \E H - FE hts
19885 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
19886 # ICH Insert Character \E [ Pn @ 1 eF ich
19887 # IDCS ID Device Control String \E [ SPC O - * -
19888 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
19889 # IL Insert Line \E [ Pn L 1 eF il
19890 # IND Index \E D - FE -
19891 # INT Interrupt \E a - Fs -
19892 # JFY Justify \E [ Ps SPC F 0 FE -
19893 # IS1 Info Separator #1 * ^_ - * -
19894 # IS2 Info Separator #1 * ^^ - * -
19895 # IS3 Info Separator #1 * ^] - * -
19896 # IS4 Info Separator #1 * ^\ - * -
19897 # LF Line Feed ^J - - -
19898 # LS1R Locking Shift Right 1 * \E ~ - - -
19899 # LS2 Locking Shift 2 * \E n - - -
19900 # LS2R Locking Shift Right 2 * \E } - - -
19901 # LS3 Locking Shift 3 * \E o - - -
19902 # LS3R Locking Shift Right 3 * \E | - - -
19903 # MC Media Copy \E [ Ps i 0 - - (S)
19904 # MW Message Waiting \E U - - -
19905 # NAK Negative Acknowledge * ^U - * -
19906 # NBH No Break Here * \E C - - -
19907 # NEL Next Line \E E - FE nel (D)
19908 # NP Next Page \E [ Pn U 1 eF -
19909 # NUL Null * ^@ - - -
19910 # OSC Operating System Command \E ] - Delim -
19911 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
19912 # PFS Page Format Selection * \E Pn SPC J 0 - -
19913 # PLD Partial Line Down \E K - FE - (T)
19914 # PLU Partial Line Up \E L - FE - (U)
19915 # PM Privacy Message \E ^ - Delim -
19916 # PP Preceding Page \E [ Pn V 1 eF -
19917 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
19918 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
19919 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
19920 # PTX Parallel Texts * \E [ \ - - -
19921 # PU1 Private Use 1 \E Q - - -
19922 # PU2 Private Use 2 \E R - - -
19923 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
19924 # REP Repeat Char or Control \E [ Pn b 1 - rep
19925 # RI Reverse Index \E M - FE - (V)
19926 # RIS Reset to Initial State \E c - Fs -
19927 # RM Reset Mode * \E [ Ps l - - - (W)
19928 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
19929 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
19930 # SCI Single-Char Introducer \E Z - - -
19931 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
19932 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
19933 # SD Scroll Down \E [ Pn T 1 eF rin
19934 # SDS Start Directed String * \E [ Pn ] 1 - -
19935 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
19936 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
19937 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
19938 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
19939 # SI Shift In ^O - - - (P)
19940 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
19941 # SL Scroll Left \E [ Pn SPC @ 1 eF -
19942 # SLH Set Line Home * \E [ Pn SPC U - - -
19943 # SLL Set Line Limit * \E [ Pn SPC V - - -
19944 # SLS Set Line Spacing * \E [ Pn SPC h - - -
19945 # SM Select Mode \E [ Ps h none - - (W)
19946 # SO Shift Out ^N - - - (Q)
19947 # SOH Start Of Heading * ^A - - -
19948 # SOS Start of String * \E X - - -
19949 # SPA Start of Protected Area \E V - - - (Z)
19950 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
19951 # SPH Set Page Home * \E [ Ps SPC G - - -
19952 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
19953 # SPL Set Page Limit * \E [ Ps SPC j - - -
19954 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
19955 # SR Scroll Right \E [ Pn SPC A 1 eF -
19956 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
19957 # SRS Start Reversed String * \E [ Ps [ 0 - -
19958 # SSA Start of Selected Area \E F - - -
19959 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
19960 # SSW Set Space Width * \E [ Pn SPC [ none - -
19961 # SS2 Single Shift 2 (G2 set) \E N - Intro -
19962 # SS3 Single Shift 3 (G3 set) \E O - Intro -
19963 # ST String Terminator \E \ - Delim -
19964 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
19965 # STS Set Transmit State \E S - - -
19966 # STX Start pf Text * ^B - - -
19967 # SU Scroll Up \E [ Pn S 1 eF indn
19968 # SUB Substitute * ^Z - - -
19969 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
19970 # SYN Synchronous Idle * ^F - - -
19971 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
19972 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
19973 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
19974 # TBC Tab Clear \E [ Ps g 0 FE tbc
19975 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
19976 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
19977 # TSS Thin Space Specification \E [ Pn SC E none FE -
19978 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
19979 # VPB Line Position Backward * \E [ Pn k 1 FE -
19980 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
19981 # VT Vertical Tabulation * ^K - FE -
19982 # VTS Vertical Tabulation Set \E J - FE -
19984 # ---------------------------------------------------------------------------
19988 # Some control characters are listed in the ECMA-48 standard without
19989 # being assigned functions relevant to terminal control there (they
19990 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
19991 # here anyway for completeness.
19993 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
19995 # (B) There seems to be some confusion abroad between CHA and HPA. Most
19996 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
19997 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
19998 # preserved the CHA abbreviation.
20000 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20001 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20002 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20003 # CHT abbreviation.
20005 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20007 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20010 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20011 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20012 # 5 = clear all char tabs, 6 = clear all line tabs.
20014 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20015 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20016 # Position Absolute" but retains the HVP abbreviation.
20018 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20021 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20022 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20023 # DSR, 6 = request CPR response.
20025 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20026 # 1 = clear from beginning, 2 = clear.
20028 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20030 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20032 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20033 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20034 # Position Relative" but retains the HPR abbreviation.
20036 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20039 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20040 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20041 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20042 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20043 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20044 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20045 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20046 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20047 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20048 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20049 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20050 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20051 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20052 # 61-65 = variable highlights for ideograms.
20054 # (P) SI is also called LSO, Locking Shift Zero.
20056 # (Q) SI is also called LS1, Locking Shift One.
20058 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20059 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20060 # Absolute' but retains the VPA abbreviation.
20062 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20063 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20064 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20065 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20066 # 7 = start relay to secondary aux device.
20068 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20071 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20074 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20076 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20077 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20078 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20079 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20080 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20081 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20082 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20083 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20084 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20085 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20086 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20087 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20088 # from ECMA-48's 5th edition but are listed here for reference.
20090 # (X) Select Alternate Presentation Variants is used only for non-Latin
20093 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20095 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20098 # ---------------------------------------------------------------------------
20102 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20103 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20105 # Delim a Delimiter
20107 # x/y identifies a character by position in the ASCII table (column/row)
20109 # eF editor function (see explanation)
20111 # FE format effector (see explanation)
20113 # F is a Final character in
20114 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20115 # a control sequence (F from 4/0 to 7/14)
20117 # Gs is a graphic character appearing in strings (Gs ranges from
20118 # 2/0 to 7/14) in the ASCII table
20120 # Ce is a control represented as a single bit combination in the C1 set
20121 # of controls in an 8-bit character set
20123 # C0 the familiar set of 7-bit ASCII control characters
20125 # C1 roughly, the set of control chars available only in 8-bit systems.
20126 # This is too complicated to explain fully here, so read Jim Fleming's
20127 # article in the February 1983 BYTE, especially pages 214 through 224.
20129 # Fe is a Final character of a 2-character Escape sequence that has an
20130 # equivalent representation in an 8-bit environment as a Ce-type
20131 # (Fe ranges from 4/0 to 5/15)
20133 # Fs is a Final character of a 2-character Escape sequence that is
20134 # standardized internationally with identical representation in 7-bit
20135 # and 8-bit environments and is independent of the currently
20136 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
20138 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
20141 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
20144 # Pn is a numeric parameter in a control sequence, a string of zero or
20145 # more characters ranging from 3/0 to 3/9 in the ASCII table
20147 # Ps is a variable number of selective parameters in a control sequence
20148 # with each selective parameter separated from the other by the code
20149 # 3/11 (which usually represents a semicolon); Ps ranges from
20150 # 3/0 to 3/9 and includes 3/11
20152 # * Not relevant to terminal control, listed for completeness only.
20154 # Format Effectors versus Editor Functions
20156 # A format effector specifies how following output is to be displayed.
20157 # An editor function allows you to modify the display. Informally
20158 # format effectors may be destructive; format effectors should not be.
20160 # For instance, a format effector that moves the "active position" (the
20161 # cursor or equivalent) one space to the left would be useful when you want to
20162 # create an overstrike, a compound character made of two standard characters
20163 # overlaid. Control-H, the Backspace character, is actually supposed to be a
20164 # format effector, so you can do this. But many systems use it in a
20165 # nonstandard fashion, as an editor function, deleting the character to the
20166 # left of the cursor and moving the cursor left. When Control-H is assumed to
20167 # be an editor function, you cannot predict whether its use will create an
20168 # overstrike unless you also know whether the output device is in an "insert
20169 # mode" or an "overwrite mode". When Control-H is used as a format effector,
20170 # its effect can always be predicted. The familiar characters carriage
20171 # return, linefeed, formfeed, etc., are defined as format effectors.
20173 # NOTES ON THE DEC VT100 IMPLEMENTATION
20175 # Control sequences implemented in the VT100 are as follows:
20177 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
20178 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
20180 # plus several private DEC commands.
20182 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
20184 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
20185 # Erase from beginning of line to cursor Esc [ 1 K
20186 # Erase line containing cursor Esc [ 2 K
20187 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
20188 # Erase from beginning of screen to cursor Esc [ 1 J
20189 # Erase entire screen Esc [ 2 J
20191 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
20192 # Esc [ 2 J, but this is wrong; the default is 0.
20194 # The VT100 responds to receiving the DA (Device Attributes) control
20196 # Esc [ c (or Esc [ 0 c)
20198 # by transmitting the sequence
20202 # where Ps is a character that describes installed options.
20204 # The VT100's cursor location can be read with the DSR (Device Status
20209 # The VT100 reports by transmitting the CPR sequence
20213 # where Pl is the line number and Pc is the column number (in decimal).
20215 # The specification for the DEC VT100 is document EK-VT100-UG-003.
20219 # Here is a description of the color and attribute controls supported in the
20220 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
20221 # terminal emulators for Intel boxes obey these. They are a proper subset
20222 # of the ECMA-48 escapes.
20224 # 0 all attributes off
20225 # 1 foreground bright
20227 # 5 blink on/background bright (not reliable with brown)
20229 # 8 set blank (non-display)
20230 # 10 set primary font
20231 # 11 set first alternate font (on PCs, display ROM characters 1-31)
20232 # 12 set second alternate font (on PCs, display IBM high-half chars)
20234 # Color attribute sets
20235 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
20236 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
20237 # Bright black becomes gray. Bright brown becomes yellow,
20238 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
20240 # * If the 5 attribute is on and you set a background color (40-47) it is
20241 # supposed to enable bright background.
20243 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
20244 # when you try to set a "bright brown" (yellow) background with attribute
20245 # 5 (you get a blinking yellow foreground instead). A few displays
20246 # (including the System V console) support an attribute 6 that undoes this
20247 # braindamage (this is required by iBCS2).
20249 # * Some older versions of ANSI.SYS have a bug that causes thems to require
20250 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
20253 #### Intel Binary Compatibility Standard
20255 # For comparison, here are the capabilities implied by the Intel Binary
20256 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
20257 # These recommendations are optional. IBCS2 allows the leading escape to
20258 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
20259 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
20260 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
20261 # terminfo entry are followed with the corresponding capability in parens:
20263 # CSI <n>k disable (n=0) or enable (n=1) keyclick
20264 # CSI 2h lock keyboard
20265 # CSI 2i send screen as input
20266 # CSI 2l unlock keyboard
20267 # CSI 6m enable background color intensity
20268 # CSI <0-2>c reserved
20269 # CSI <0-59>m select graphic rendition
20270 # CSI <n>;<m>H (cup) cursor to line n and column m
20271 # CSI <n>;<m>f cursor to line n and column m
20272 # CSI <n>@ (ich) insert characters
20273 # CSI <n>A (cuu) cursor up n lines
20274 # CSI <n>B (cud) cursor down n lines
20275 # CSI <n>C (cuu) cursor right n characters
20276 # CSI <n>D (cud) cursor left n characters
20277 # CSI <n>E cursor down n lines and in first column
20278 # CSI <n>F cursor up n lines and in first column
20279 # CSI <n>G (hpa) position cursor at column n-1
20280 # CSI <n>J (ed) erase in display
20281 # CSI <n>K (el) erase in line
20282 # CSI <n>L (il) insert line(s)
20283 # CSI <n>P (dch) delete characters
20284 # CSI <n>S (indn) scroll up n lines
20285 # CSI <n>T (rin) scroll down n lines
20286 # CSI <n>X (ech) erase characters
20287 # CSI <n>Z (cbt) back up n tab stops
20288 # CSI <n>` cursor to column n on line
20289 # CSI <n>a (cuu) cursor right n characters
20290 # CSI <n>d (vpa) cursor to line n
20291 # CSI <n>e cursor down n lines and in first column
20292 # CSI <n>g (cbt) clear all tabs
20293 # CSI <n>z make virtual terminal n active
20294 # CSI ?7h (smam) turn automargin on
20295 # CSI ?7l (rmam) turn automargin off
20296 # CSI s save cursor position
20297 # CSI u restore cursor position to saved value
20298 # CSI =<c>A set overscan color
20299 # CSI =<c>F set normal foreground color
20300 # CSI =<c>G set normal background color
20301 # CSI =<c>H set reverse foreground color
20302 # CSI =<c>I set reverse foreground color
20303 # CSI =<c>J set graphic foreground color
20304 # CSI =<c>K set graphic foreground color
20305 # CSI =<n>g (dispc) display n from alternate graphics character set
20306 # CSI =<p>;<d>B set bell parameters
20307 # CSI =<s>;<e>C set cursor parameters
20308 # CSI =<x>D enable/disable intensity of background color
20309 # CSI =<x>E set/clear blink vs. bold background
20310 # CSI 7 (sc) (sc) save cursor position
20311 # CSI 8 (rc) (rc) restore cursor position to saved value
20312 # CSI H (hts) (hts) set tab stop
20313 # CSI Q<n><string> define function key string
20314 # (string must begin and end with delimiter char)
20315 # CSI c (clear) clear screen
20317 # The lack of any specification for attributes in SGR (among other things)
20318 # makes this a wretchedly weak standard. The table above is literally
20319 # everything iBSC2 has to say about terminal escape sequences; there is
20320 # no further discussion of their meaning or how to set the parameters
20321 # in these sequences at all.
20324 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
20326 # The historical termcap file entries were written primarily in 4.4BSD termcap.
20327 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
20328 # with the extension names chosen for compatibility with the termcap names
20329 # assigned in System V terminfo. There are some variant extension sets out
20330 # there. We try to describe them here.
20332 # XENIX extensions:
20334 # The XENIX extensions include a set of function-key capabilities as follows:
20336 # code XENIX variable name terminfo name name clashes?
20337 # ---- ------------------- ------------- -----------------------
20339 # CR key_char_right
20340 # CW key_change_window create_window
20342 # HM key_home khome
20344 # LD key_delete_line kdl1
20345 # LF key_linefeed label_off
20346 # NU key_next_unlocked_cell
20347 # PD key_page_down knp
20349 # PN start_print mc5
20351 # PS stop_print mc4
20352 # PU key_page_up kpp pulse
20353 # RC key_recalc remove_clock
20354 # RF key_toggle_ref req_for_input
20355 # RT key_return kent
20356 # UP key_up_arrow kcuu1 parm_up_cursor
20358 # WR key_word_right
20360 # The XENIX extensions also include the following character-set and highlight
20363 # XENIX terminfo function
20364 # ----- -------- ------------------------------
20365 # GS smacs start alternate character set
20366 # GE rmacs end alternate character set
20367 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
20368 # bo blink begin blink (not used in /etc/termcap)
20369 # be end blink (not used in /etc/termcap)
20370 # bb blink glitch (not used in /etc/termcap)
20371 # it dim begin dim (not used in /etc/termcap)
20372 # ie end dim (not used in /etc/termcap)
20373 # ig dim glitch (not used in /etc/termcap)
20375 # Finally, XENIX also used the following forms-drawing capabilities:
20377 # single double type ASCII approximation
20378 # ------ ------ ------------- -------------------
20379 # GV Gv vertical line |
20380 # GH Gv horizontal line - _
20381 # G1 G5 top right corner _ |
20382 # G2 G6 top left corner |
20383 # G3 G7 bottom left corner |_
20384 # G4 G8 bottom right corner _|
20385 # GD Gd down-tick character T
20386 # GL Gl left-tick character -|
20387 # GR Gr right-tick character |-
20388 # GC Gc middle intersection -|-
20389 # GU Gu up-tick character _|_
20391 # These were invented to take advantage of the IBM PC ROM character set. One
20392 # can compose an acsc string from the single-width characters as follows
20393 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
20394 # When translating a termcap file, ncurses tic will do this automatically.
20395 # The double forms characters don't fit the SVr4 terminfo model.
20399 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
20400 # nonstandard capabilities. Its signature is the KM capability, used to name
20401 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
20402 # set. Comments in the original, and a little cross-checking with other AT&T
20403 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
20404 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
20405 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
20406 # cursor invisible), and CV=:ve: (make cursor normal).
20410 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
20411 # have the System V capabilities up to SVr1 level. After that, it supports
20412 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
20413 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
20414 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
20415 # HP binary format incompatible with SVr4's.
20419 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
20420 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
20421 # capabilities following prtr_non with the following special capabilties:
20422 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
20423 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
20424 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
20425 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
20426 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
20427 # renamed (to kcbt and kslt). The places in the box[12] capabilities
20428 # correspond to acsc chars, here is the mapping:
20430 # box1[0] = ACS_ULCORNER
20431 # box1[1] = ACS_HLINE
20432 # box1[2] = ACS_URCORNER
20433 # box1[3] = ACS_VLINE
20434 # box1[4] = ACS_LRCORNER
20435 # box1[5] = ACS_LLCORNER
20436 # box1[6] = ACS_TTEE
20437 # box1[7] = ACS_RTEE
20438 # box1[8] = ACS_BTEE
20439 # box1[9] = ACS_LTEE
20440 # box1[10] = ACS_PLUS
20442 # The box2 characters are the double-line versions of these forms graphics.
20443 # The AIX binary terminfo format is incompatible with SVr4's.
20445 # Iris console extensions:
20447 # HS is half-intensity start; HE is half-intensity end
20448 # CT is color terminal type (for Curses & rogue)
20449 # CP is color change escape sequence
20450 # CZ are color names (for Curses & rogue)
20452 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
20456 # There is a set of extended termcaps associated with something
20457 # called the "Terminal Control" or TC package created by MainStream Systems,
20458 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
20459 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
20460 # that flags color terminals.
20462 ######## CHANGE HISTORY
20464 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
20465 # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
20468 # This file contains all the capability information present in John Kunze's
20469 # last version of the termcap master file, except as noted in the change
20470 # comments at end of file. Some information about very ancient obsolete
20471 # capabilities has been moved to comments. Some all-numeric names of older
20472 # terminals have been retired.
20474 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
20475 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
20476 # used by BSD curses.
20478 # The 9.1.0 version of this file was translated from my lightly-edited copy of
20479 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
20480 # the purpose. Unless the ncurses tic implementation and the Lisp code were
20481 # making perfectly synchronized mistakes which I then failed to catch by
20482 # eyeball, the translation was correct and perfectly information-preserving.
20484 # Major version number bumps correspond to major version changes in ncurses.
20486 # Here is a log of the changes since then:
20488 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
20489 # * First terminfo master translated from 8.3.
20490 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
20491 # * Replaced Wyse entries with updated entries supplied by vendor.
20493 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
20494 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
20495 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
20496 # * Better XENIX keycap translation. Describe TC termcaps.
20497 # * Contact and history info supplied by Qume.
20498 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
20499 # * Raided the Shuford FTP site for recent termcaps/terminfos.
20500 # * Added information on X3.64 and VT100 standard escape sequences.
20501 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
20502 # * Added a correct X11R6 xterm entry.
20503 # * Fixed terminfo translations of padding.
20504 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
20505 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
20506 # * Added u6/u7/u8/u9 capabilities.
20507 # * Added PCVT entry.
20508 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
20509 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
20510 # to use reverse-video standout so Emacs will look right.
20511 # * Added el1 capability to ansi.
20512 # * Added smacs/rmacs to ansi.sys.
20514 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
20515 # * New mt70 entry.
20516 # * Added COPYRIGHTS AND OTHER DELUSIONS.
20517 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
20518 # smartvid & smarterm, ampex 175 & 219 & 232,
20519 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
20520 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
20521 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
20522 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
20523 # * Replaced the Perkin-Elmer entries with vendor's official ones.
20524 # * Restored the old minimal-ansi entry, luna needs it.
20525 # * Fixed some incorrect ip and proportional-padding translations.
20526 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
20527 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
20528 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
20529 # to force a particular height.
20530 # * Added beehive4 and reorganized other Harris entries.
20531 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
20532 # * Merged in DEC's official entries for its terminals. The only old
20533 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
20534 # * Replaced the translated BBN Bitgraph entries with purpose-built
20535 # ones from AT&T's SVr3.
20536 # * Replaced the AT&T entries with AT&T's official terminfos.
20537 # * Added teleray 16, vc415, cops10.
20538 # * Merged in many individual capabilities from SCO terminfo files.
20539 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
20541 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
20542 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
20543 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
20544 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
20545 # simterm, citoh and variants.
20546 # * Replaced sol entry with sol1 and sol2.
20547 # * Replaced Qume QVT and Freedom-series entries with purpose-built
20548 # terminfo entries.
20549 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
20550 # and dg200 entries using caps from from SCO.
20551 # * Added the usual set of function-key mappings to ANSI entry.
20552 # * Corrected xterm's function-key capabilities.
20553 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
20554 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
20555 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
20556 # * Fix in xterm entry, get the arrow keys right.
20557 # * Change some \0 escapes to \200.
20558 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
20559 # * Added apple (Videx card), adm1a, oadm31.
20560 # * Fixed malformed ampex csr.
20561 # * Fixed act4, cyb110; they had old-style prefix padding left in.
20562 # * Changed mandatory to advisory padding in many entries.
20563 # * Replaced HP entries up to hpsub with purpose-built ones.
20564 # * Blank rmir/smir/rmdc/smdc capabilities removed.
20565 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
20566 # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
20567 # * Replaced the Ann Arbor entries with SCO's, the init strings are
20568 # more efficient (but the entries otherwise identical).
20569 # * Added dg211 from Shuford archive.
20570 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
20571 # adm42-nl, pc52, gs6300, xerox820, uts30.
20572 # * Pull SCO's padding into vi200 entry.
20573 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
20574 # entries merged in from SCO's descriptions.
20575 # * Fixed old-style prefix padding on zen50, h1500.
20576 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
20577 # entry from SCO's description.
20578 # * Reorganized the special entries.
20579 # * Added lm#0 to cbunix and virtual entries.
20581 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
20582 # * Restored cdc456tst.
20583 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
20584 # * Added megatek, beacon, microkit.
20585 # * Freeze for ncurses-1.9 release.
20586 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
20587 # * Added historical data for TAB.
20588 # * Comment fixes from David MacKenzie.
20589 # * Added the new BSDI pc3 entry.
20590 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
20591 # * A change in the tic -C logic now ensures that all entries in
20592 # the termcap translation will fit in < 1024 bytes.
20593 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
20594 # from GNU termcap file. This merges in all their local information.
20595 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
20596 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
20597 # * Added warnings about entries with long translations (restoring
20598 # all the GNU termcaps pushes a few over the edge).
20599 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
20600 # * Yet another tic change, and a couple of entry tweaks, to reduce the
20601 # number of long (> 1024) termcap translations back to 0.
20603 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
20604 # * Added kf13-kf20 to Linux entry.
20605 # * Regularize Prime terminal names.
20606 # * Historical data on Synertek.
20607 # * Freeze for ncurses-1.9.1.
20608 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
20609 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
20610 # * Eliminate whitespace in short name fields, this tanks some scripts.
20611 # * Name field changes to shorten some long entries.
20612 # * Termcap translation now automatically generates empty rmir/smir
20613 # when ich1/ich is present (copes with an ancient vi bug).
20614 # * Added `screen' entries from FSF's screen-3.6.2.
20615 # * Added linux-nic and xterm-nic entries.
20616 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
20617 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
20618 # eliminating some special-case code in ncurses.
20620 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
20621 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
20622 # that captures everything unique from it.
20623 # * Added reorder script generator.
20624 # * Freeze for ncurses 1.9.2 release.
20625 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
20626 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
20627 # * Added Olaf Siebert's corrections for adm12.
20628 # * ansi-pc-color now includes the colors and pairs caps, so that
20629 # entries which use it will inherit them automatically.
20630 # * The linux entry can now recognize the center (keypad 5) key.
20631 # * Removed some junk that found its way into Linux acsc.
20633 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
20634 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
20635 # * xterm doesn't try to use application keypad mode any more.
20636 # * Freeze for ncurses-1.9.3 release.
20637 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
20638 # * Added corrected sun entry from vendor.
20639 # * Added csr capability to linux entry.
20640 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
20641 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
20642 # * Some commented-out caps in long entries come back in, my code
20643 # for computing string-table lengths had a bug in it.
20644 # * pcansi series modified to fit comm-program reality better.
20645 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
20646 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
20647 # * Correct some bad aliases in the pcansi series
20648 # * Added entry for QNX console.
20649 # * Clean up duplicate long names for use with 4.4 library.
20650 # * Change vt100 standout to be normal reverse vide, not bright reverse;
20651 # this makes the Emacs status line look better.
20652 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
20653 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
20654 # * Minor surgery, mostly on name strings, to shorten termcap version.
20656 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
20657 # * Added dec-vt100 for use with the EWAN emulator.
20658 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
20659 # * Freeze for 1.9.5 alpha release.
20660 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
20661 # * Changed xterm lines to 24, the X11R6 default.
20662 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
20663 # * Added 7 newly discovered, undocumented acsc characters to linux
20664 # entry (the pryz{|} characters).
20665 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
20666 # * Correct two typos in the xterm entries introduced in 9.9.1.
20667 # * I finally figured out how to translate ko capabilities. Done.
20668 # * Added tvi921 entries from Tim Theisen.
20669 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
20670 # * Removed mystery tec entry, it was neither interesting nor useful.
20671 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
20672 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
20673 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
20674 # by making them relative to use capabilities
20675 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
20676 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
20677 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
20679 # * Translate all home=\E[;H capabilities to home=\E[H, they're
20681 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
20682 # vt100 and ANSI-like terminals.
20683 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
20684 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
20685 # does this now, too.
20686 # * fviewpoint is gone, it duplicated screwpoint.
20687 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
20688 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
20689 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
20690 # The UW vi50 replaces the old one, which becomes vi50adm,
20691 # * No more embedded commas in name fields.
20693 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
20694 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
20695 # * Introduced klone+* entries for describing Intel-console behavior.
20696 # * Linux kbs is default-mapped to delete for some brain-dead reason.
20697 # * -nsl -> -ns. The -pp syntax is obsolete.
20698 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
20699 # * Make xterm entry do application-keypad mode again. I got complaints
20700 # that it was messing up someone's 3270 emulator.
20701 # * Added some longname fields in order to avoid warning messages from
20702 # older tic implementations.
20703 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
20704 # it! (This gives us pi, greater than, less than, and a few more.)
20705 # * Freeze for ncurses-1.9.6 release.
20706 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
20707 # * Add xon to a number of console entries, they're memory-mapped and
20708 # don't need padding.
20709 # * Correct the use dependencies in the ansi series.
20710 # * Hand-translate more XENIX capabilities.
20711 # * Added hpterm entry for HP's X terminal emulator.
20712 # * Added aixterm entries.
20713 # * Shortened four names so everything fits in 14 chars.
20715 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
20716 # * Added ibcs2 entry and info on iBCS2 standard.
20717 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
20718 # * We can handle the HP meml/memu capability now.
20719 # * Added smacs to klone entries, just as documentation.
20720 # * Carrected ansi.sys and cit-500 entries.
20721 # * Added z39, vt320-k311, v220c, and avatar entries.
20722 # * Make pcansi use the ansi.sys invis capability.
20723 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
20724 # tvi925, tvi950, dt80, ncr7900i, h19.
20725 # * X3.64 has been withdrawn, change some references.
20726 # * Removed function keys from ansi-m entry.
20727 # * Corrected ansi.sys entry.
20728 # * Freeze for ncurses-1.9.7 release.
20729 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
20730 # * Added rmam/smam capabilities to many entries based on init strings.
20731 # * Added correct hpa/vpa to linux.
20732 # * Reduced several entries relative to vt52.
20733 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
20734 # * Exiled some utterly unidentifiable custom and homebrew types to the
20735 # UFO file; also, obsolete small-screen hardware; also, entries which
20736 # look flat-out incorrect, garbled, or redundant. These include the
20737 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
20738 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
20739 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
20740 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
20741 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
20742 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
20743 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
20744 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
20745 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
20746 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
20747 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
20748 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
20749 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
20750 # * Corrected pcvt25h as suggested by Brian C. Grayson
20751 # <bgrayson@pine.ece.utexas.edu>.
20752 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
20753 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
20754 # * Added kent=\EOM to xterm entry.
20756 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
20757 # * Corrected gigi entry.
20758 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
20759 # bad hpa/vpa capabilities.
20760 # * Corrected flash strings to have a uniform delay of .2 sec. No
20761 # more speed-dependent NUL-padding!
20762 # * terminfo capabilities in comments bracketed with <>.
20763 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
20764 # * Replaced pcvt with the 3.31 pcvt entries.
20765 # * Freeze for 1.9.7a.
20766 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
20767 # * Added emu entry from the X11R6 contrib tape sources.
20769 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
20770 # * Improved iris-ansi and sun entries.
20771 # * More flash string improvements.
20772 # * Corrected wy160 & wy160 as suggested by Robert Dunn
20773 # * Added dim to at386.
20774 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
20775 # he's ready to start using the termcap generated from this one.
20776 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
20777 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
20778 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
20779 # att610, att620, att630,
20780 # * Changed hazeltine name prefix from h to hz.
20781 # * Sent t500 to the UFI file.
20782 # * I think we've sucked all the juice out of BSDI's termcap file now.
20783 # * Freeze for ncurses 1.9.8 release
20784 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
20785 # * Unfreeze, linux kbs needed to be fixed.
20786 # * Tim Theisen pinned down a bug in the DMD firmware.
20787 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
20788 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
20789 # (The broken ones had been shadowed by sgr.)
20790 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
20791 # * Added documentation on ECMA-48 standard.
20792 # * New Amiga entry.
20793 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
20794 # * More ECMA-48 stuff
20795 # * Corrected typo in minix entry, added pc-minix.
20796 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
20797 # * Added rxvt entry.
20798 # * Added 1.3.x color-change capabilities to linux entry.
20799 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
20800 # * Corrected rxvt entry khome/kend.
20801 # * Corrected linux color change capabilities.
20802 # * NeXT entries from Dave Wetzel.
20803 # * Cleaned up if and rf file names (all in /usr/share now).
20804 # * Changed linux op capability to avoid screwing up a background color
20805 # pair set by setterm.
20806 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
20807 # * Added xterm-sun.
20808 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
20811 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
20812 # * Another sweep through the Shuford archive looking for new info.
20813 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
20814 # * Added st52 from Per Persson.
20815 # * Added eterm from the GNU Emacs 19.30 distribution.
20816 # * Freeze for 1.9.9.
20817 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
20818 # * FreeBSD console entries from Andrew Chernov.
20819 # * Removed duplicate Atari st52 name.
20820 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
20821 # * xterm doesn't actually have ACS_BLOCK.
20822 # * Change klone+color setf/setb to simpler forms that can be
20823 # translated into termcap.
20825 # * Removed mechanically-generated junk capabilities from cons* entries.
20826 # * Added color support to bsdos.
20827 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
20828 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
20829 # * Created ecma+color, linux can use it. Also added ech to linux.
20830 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
20831 # * Add descriptions to FreeBSD console entries. Also shorten
20832 # some aliases to <= 14 chars for portability.
20833 # * Added x68k console
20834 # * Added OTbs to several VT-series entries.
20835 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
20836 # * screen entry update for 3.7.1 from Michael Alan Dorman.
20837 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
20838 # * kterm correction due to Kenji Rikitake.
20839 # * ACS correction in vt320-kll due to Phillippe De Muyter.
20840 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
20841 # * Sun console entry correction from J.T. Conklin.
20842 # * Changed all DEC VT300 and up terminals to use VT300 tab set
20843 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
20844 # * Added smul to linux entry (we never noticed it was missing
20845 # because of sgr!).
20846 # * Added rmln to hp+labels (deduced from other HP entries).
20847 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
20848 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
20849 # * Corrected vt220 acsc.
20850 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
20851 # this corresponds to reality and helps prevent some tic warnings.
20852 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
20853 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
20854 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
20855 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
20856 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
20857 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
20858 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
20859 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
20860 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
20861 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
20862 # ifmr, v3220, wy100q, tandem653, ibmaed.
20863 # * Added DWK terminal description.
20864 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
20865 # * Many entries now have highlights inherited from adm+sgr.
20866 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
20867 # * xtitle and xtitle-twm enable access to the X status line.
20868 # * Added linux-1.3.6 color palette caps in conventional format.
20869 # * Added adm1178 terminal.
20870 # * Move fos and apollo terminals to obsolete category.
20871 # * Aha! The BRL terminals file told us what the Iris extensions mean.
20872 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
20873 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
20875 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
20876 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
20877 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
20878 # * Corrected, from BRL termcap file: vi50.
20879 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
20880 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
20881 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
20882 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
20883 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
20884 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
20885 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
20886 # * Paired-attribute fixes to various terminals.
20887 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
20888 # * xterm entry corrections from Thomas Dickey.
20889 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
20890 # * Added t916 entry, translated from a termcap in SCO's support area.
20891 # * New qnx entry from Michael Hunter.
20892 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
20893 # * Added hpex2 from Ville Sulko.
20894 # * Fixed a bug that ran the qnx and pcvtXX together.
20895 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
20896 # * Added dtterm entry from Solaris CDE.
20897 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
20898 # * corrected pairs#8 typo in dtterm entry.
20900 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
20901 # * updated xterm entry to cover 3.1.2E's new features.
20902 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
20903 # * Added new minix entry
20904 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
20905 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
20906 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
20907 # * Added Prism entries and kt7ix.
20908 # * Caution notes about EWAN and tabset files.
20909 # * Changed /usr/lib/tabset -> /usr/share/tabset.
20910 # * Added acsc/rmacs/smacs to vt52.
20911 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
20912 # * Merged in Thomas Dickey's reorganization of the xterm entries;
20913 # added technical corrections to avoid warning messages.
20914 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
20915 # * Added rmso=\E[27m in Linux entry.
20916 # * Added koi8-r support for Linux console.
20917 # * Replace xterm entries with canonical ones from XFree86 3.2.
20918 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
20919 # * Added color_xterm from Jacob Mandelson
20920 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
20921 # * Back off the xterm entry to use r6 as a base.
20922 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
20923 # * Added dec-vt220 at Adrian Garside's request.
20925 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
20927 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
20928 # * Minor corrections to xterm entries.
20929 # * Replaced EWAN telnet entry.
20930 # * Dropped the reorder script generator. It was a fossil.
20931 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
20932 # * Replaced minitel-2 entry.
20933 # * Added MGR, ansi-nt.
20934 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
20935 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
20936 # the 4.4BSD Lite2 file.
20938 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
20939 # * Use setaf/setab consistently with SVr4.
20940 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
20941 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
20942 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
20943 # * add xterm-16color, for XFree86 3.3
20944 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
20945 # * correct typo in emu
20946 # * correct typo in vt102-w (Robert Wuest)
20947 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
20948 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
20949 # * remove ech capability from rxvt (it does the wrong thing)
20950 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
20951 # * remove spurious newlines from several entries (hp+color, wy50,
20952 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
20954 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
20955 # * correct rmso capability of wy50-mc
20956 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
20957 # * add cbt to xterm-xf86-v32
20958 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
20959 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
20960 # other capabilities not in xterm-r6.
20961 # * remove alternate character set from kterm entry.
20962 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
20963 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
20964 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
20965 # * add xterm-8bit entry.
20966 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
20967 # * repair several places where early version of tic replaced \, with \\\,
20968 # * make acsc entries canonical form (sorted, uniq).
20969 # * modify acsc entries for linux, linux-koi8
20970 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
20971 # * add color, mouse support to kterm.
20972 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
20973 # * correct wy120 smxon/tbc capabilities which were stuck together.
20974 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
20975 # * add entry for xterm-xf86-v39t
20976 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
20977 # * add u8,u9 to sun-il description
20978 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
20979 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
20981 # * add hds200 description (Walter Skorski)
20982 # * add EMX 0.9b descriptions
20983 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
20984 # * rename xhpterm back to hpterm.
20985 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
20986 # * change initc in linux-c-nc to use 0..1000 range.
20987 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
20988 # * remove hpa/vpa from rxvt, which implements them incorrectly.
20989 # * add sgr0 for rxvt.
20990 # * remove bogus smacs/rmacs from EMX descriptions.
20991 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
20992 # * revised entry for att7300
20993 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
20994 # * use \0 rather than \200.
20995 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
20996 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
20997 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
20998 # * rename xterm-xf86-v39t to xterm-xf86-v40
20999 # * remove bold/underline from sun console entries since they're not
21001 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21002 # * add beterm entry (Fred Fish)
21003 # * add irix-color/xwsh entry.
21004 # * turn ncv off for linux.
21005 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21006 # * set ncv for FreeBSD console (treat colors with reverse specially).
21007 # * remove sgr string from qnx based on report by Xiaodan Tang
21008 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21009 # * remove spurious commas from descriptions
21010 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21011 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21012 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21013 # apparently based on cp-866).
21015 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21017 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21018 # * Replaced minitel-2 entry.
21019 # * Added MGR, ansi-nt.
21020 # * Minor corrections to xterm entries.
21021 # * Replaced EWAN telnet entry.
21022 # * Dropped the reorder script generator. It was a fossil.
21023 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21024 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21025 # the 4.4BSD Lite2 file.
21026 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21027 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21028 # * Updated iris-ansi; corrected vt102-w.
21029 # * Switch base xterm entry to 3.3 level.
21030 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21032 # * Removed rmir/smir from tv92B.
21034 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21035 # * add hds200 description (Walter Skorski)
21036 # * add beterm entry (Fred Fish)
21037 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21038 # iris-color entries.
21039 # * add emx entries.
21040 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
21041 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
21043 # * remove sgr string from qnx based on report by Xiaodan Tang
21044 # * Added u8/u9, removed rmul/smul from sun-il.
21045 # * 4.2 tic displays \0 rather than \200.
21046 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21047 # apparently based on cp-866).
21048 # * Merged in Pavel Roskin's acsc for linux-koi8
21049 # * Corrected some erroneous \\'s to \.
21050 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21051 # * II -> ii in pcvtXX, screen, xterm.
21052 # * Removed \n chars following ANSI escapes in sgr & friends.
21053 # * Updated Wyse entries.
21054 # * h19 corrections from Tim Pierce.
21055 # * Noted that the dm2500 has both ich and smir.
21056 # * added pccons for the Alpha under OSF/1.
21057 # * Added Sony NEWS workstation entries and cit101e-rv.
21058 # * Reverted `amiga'; to Kent Polk's version, as I'm told
21059 # the Verkuil entry messes up with Amiga Telnet.
21060 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
21061 # * Corrected attributions in 10.2.0 release notes.
21062 # * Scanned the Shuford archive for new terminfos and information.
21063 # * Removed sgr from qnx entry (Thomas Dickey).
21064 # * Added entries for ICL and Kokusai Data Systems terminals.
21065 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
21066 # * Incorporated att700 from the Boundless Technology FTP site.
21067 # * Miscellaneous contact-address and Web-page updates.
21069 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
21072 # * add nxterm and xterm-color terminfo description (request by Cristian
21073 # Gafton <gafton@redhat.com>).
21074 # * modify rxvt terminfo description to clear alternate screen before
21075 # switching back to normal screen, for compatibility with applications
21076 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21077 # * modify linux terminfo description to reset color palette (reported
21078 # by Telford Tendys <telford@eng.uts.edu.au>).
21081 # * merge changes from current XFree86 xterm terminfo descriptions.
21084 # * Added minitel1 entries from Alexander Montaron.
21085 # * Added qnxt2 from Federico Bianchi.
21086 # * Added arm100 terminfo entries from Dave Millen.
21089 # * Added ncsa telnet entries from Francesco Potorti
21092 # * modify ncsa telnet entry to reflect color, other capabilities based on
21093 # examination of the source code - T.Dickey.
21096 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
21099 # * Added Francesco Potorti's tuned Wyse 99 entries.
21100 # * dtterm enacs correction from Alexander V. Lukyanov.
21101 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
21102 # * correct a typo in icl6404 entry.
21103 # * add xtermm and xtermc
21106 # * format most %'char' sequences to %{number}
21107 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
21108 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
21111 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
21112 # * correct initialization string in xterm-r5, add misc other features
21113 # to correspond with xterm patch 84 - TD
21116 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
21117 # * add Mathew Vernon's mach console entries
21118 # * corrections for ncsa function-keys (report by Larry Virden)
21121 # * change linux to use ncv#2, since underline does not work with color - TD
21124 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
21125 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21126 # application modes, change kent to use the correct keypad code - TD
21129 # * add entry for Tera Term - TD
21132 # * minor improvements for teraterm entry - TD
21133 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
21134 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
21137 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
21138 # xterm and ncsa entries by removing the unneeded ones. Note that
21139 # some entries will return kend & khome versus kslt and kfnd, for
21140 # PC-style keyboards versus strict vt220 compatiblity - TD
21143 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
21145 # * add 'crt' entry - TD
21146 # * correct typos in 'linux-c' entry - TD
21149 # * update entries for BSD/OS console to use klone+sgr and klone+color
21150 # (Jeffrey C Honig)
21153 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
21156 # * add linux-lat, from RedHat patches to ncurses 4.2
21159 # * add complete set of default function-key definitions for scoansi - TD.
21162 # * add cnorm, cvvis for Linux 2.2 kernels
21165 # * add kmous to xterm-r5 -TD
21166 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
21167 # parent "use" clause -TD
21170 # * corrected cnorm, added el1 in 'screen' description -TD
21173 # * add ms-vt100 -TD
21176 # * corrections to beterm entry -TD
21179 # * add cygwin entry -TD
21182 # * minor corrections for beterm entry -TD
21185 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
21188 # * add amiga-8bit entry
21189 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
21190 # rcons-color, based on
21191 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
21192 # * add alias for iris-ansi-net
21195 # * corrected scoansi entry's acsc, some function keys, add color -TD
21198 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
21199 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
21200 # key mapping, leaving Potorti's entries more like he named them -TD
21201 # * remove enter/exit am-mode from cygwin -TD
21204 # * correct typos in several entries (missing '[' from CSI):
21205 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
21206 # strings for avt-ns -TD
21207 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
21210 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
21211 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
21212 # * add xterm-88color and xterm-256color -TD
21215 # * add "obsolete" termcap strings -TD
21216 # * add kvt and gnome entries -TD
21219 # * correct cup string for regent100 -TD
21222 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
21223 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
21224 # * change OTrs capabilities to rs2 -TD
21225 # * add obsolete and extended capabilities to 'screen' -TD
21228 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
21230 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
21231 # and adding kcbt -TD
21234 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
21235 # nonstandard resource settings -TD
21238 # * minor fixes for xterm-*, based on Debian #58530 -TD
21241 # * add several terminal types from esr's "11.0", as well as comments.
21242 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
21243 # vt220-8bit, vt220-old, wy85-8bit
21246 # * add several terminal types from esr's "11.0.1" (ansi-*).
21247 # * update OTxx capabilities for changes on 2000/3/4.
21248 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
21251 # * move screen's AX extension to ecma+color, modify several entries to
21252 # use that, adjusting ncv as needed -TD
21255 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
21256 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
21257 # in esr's version.
21260 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
21261 # * correct color definition for ibm3164, make minor changes to other
21262 # IBM terminal definitions based on recent terminfo descriptions -TD
21265 # * add mgterm, from NetBSD -TD
21266 # * add alias sun-cgsix for sun-ss5 as per NetBSD
21267 # * change cons25w to use rs2 for reset rather than rs1 -TD
21268 # * add rc/sc to aixterm based on manpage -TD
21271 # * remove ncv from xterm-16color, xterm-256color
21274 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
21277 # * add Eterm (Michael Jennings)
21280 # * add amiga-vnc entry.
21283 # * correct description of Top Gun Telnet.
21284 # * add kterm-color
21287 # * add qansi* entries from QNX ftp site.
21290 # * add Matrix Orbital entries by Eric Z. Ayers).
21291 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
21295 # * add S0, E0 extensions to screen's entry -TD
21298 # * several corrections based on tic's new parameter-checking code -TD
21299 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
21300 # bracketing sequences that reset video attributes (\E8 would restore
21304 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
21307 # * improved scoansi, based on SCO man-page, and testing console,
21308 # scoterm with tack -TD
21311 # * modify kterm to use acsc via SCS controls.
21314 # * screen 3.9.8 allows xterm mouse controls to pass-through
21317 # * remove spurious "%|" from some xterm entries.
21320 # * modify 'screen' khome/kend to match screen 3.09.08
21321 # * add examples of 'screen' customization (screen.xterm-xfree86,
21322 # screen.xterm-r6, screen.teraterm) -TD
21325 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
21326 # * add "Apple_Terminal" entries -Benjamin Sittler
21327 # * remove time-delays from "Apple_Terminal" entries -TD
21328 # * make sgr entries time-delays consistent with individual caps -TD
21331 # * corrected/updated screen.xterm-xfree86
21334 # * ELKS descriptions, from Federico Bianchi
21335 # * add u6 (CSR) to Eterm (Michael Jennings).
21338 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
21339 # tic which handles names no longer than 14 characters. Add
21340 # corresponding descriptions for the Darwin PowerPC console named
21341 # "xnuppc" -Benjamin Sittler
21344 # * change kbs in mach entries to ^? (Marcus Brinkmann).
21347 # * add "putty" entry -TD
21348 # * updated "Apple_Terminal" entries -Benjamin Sittler
21351 # * add ms-vt100-color entry -TD
21352 # * add "konsole" entries -TD
21355 # * update gnome entry to Redhat 7.2 -TD
21358 # * add kf13-kf48 strings to cons25w -TD
21359 # * add pcvt25-color entry -TD
21360 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
21361 # * improve some features of scoansi entry based on SCO's version -TD
21362 # * add scoansi-new entry corresponding to OpenServer 5.0.6
21365 # * add kcbt to screen entry -TD
21368 # * add rxvt-16color, ibm+16color, mvterm entries -TD
21371 # * split out linux-basic entry, making linux-c inherit from that, and
21372 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
21373 # the history of this console type -TD
21374 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
21375 # r/g/b parameters of initc are in the range 0 to 1000 -TD
21378 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
21381 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
21382 # in the latter -TD
21385 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
21386 # * ncr260wy350pp has only 16 color pairs -TD
21387 # * add sun-type4 from NetBSD -TD
21388 # * update xterm-xfree86 to current (patch 170) -TD
21389 # * add screen-bce, screen-s entries -TD
21390 # * add xterm-1002, xterm-1003 entries -TD
21393 # * update homepage for Top Gun Telnet/SSH
21396 # * reduce duplication in emx entries, added emx-base -TD
21399 # * corrected acs for screen.teraterm -TD
21400 # * add tkterm entry -TD
21403 # * cygwin changes from Charles Wilson:
21404 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
21405 # primary instead of nxterm, to match XFree86's xterm.terminfo
21406 # usage and to prevent circular links.
21407 # (rxvt): add additional codes from rxvt.org.
21408 # (rxvt-color): new alias
21409 # (rxvt-xpm): new alias
21410 # (rxvt-cygwin): like rxvt, but with special acsc codes.
21411 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
21412 # with a "native" MSWin GUI. Each takes different acsc codes,
21413 # which are both different from the "normal" rxvt's acsc.
21414 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
21415 # (cygwinDBG): ditto.
21418 # * update gnome terminal entries -TD
21421 # * add entries for djgpp 2.03 and 2.04 -TD
21424 # * add alias for vtnt -TD
21425 # * update xterm-xfree86 for XFree86 4.4 -TD
21428 # * add linux-vt (Andrey V Lukyanov)
21431 # * add screen.linux -TD
21434 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
21437 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
21438 # * add vt100+ and vt-utf8 entries -TD
21439 # * add uwin entry -TD
21442 # * add sgr strings to several common entries lacking them, e.g.,
21443 # screen, to make the entries more portable -TD
21444 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
21445 # * similar fixups for cvvis/cnorm various entries -TD
21448 # * remove 'ncv' from xterm-256color (patch 188) -TD
21452 # * add xterm-xf86-v44 -TD
21453 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
21454 # on G1 being used via an ISO-2022 escape sequence (report by
21455 # Juliusz Chroboczek) -TD
21456 # * add 'hurd' entry -TD
21459 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
21461 # * align with xterm #192's use of xterm-new -TD
21462 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
21463 # * make xterm-new the default "xterm" -TD
21466 # * minor fixes for emu -TD
21468 # * add rmam/smam to linux (Trevor Van Bremen)
21469 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
21470 # * fixes for avatar0 -TD
21471 # * fixes for vp3a+ -TD
21474 # * add xterm-pc-fkeys -TD
21475 # * review/update gnome and gnome-rh90 entries (prompted by
21476 # Redhat Bugzilla #122815) -TD
21477 # * review/update konsole entries -TD
21478 # * add sgr, correct sgr0 for kterm and mlterm -TD
21479 # * correct tsl string in kterm -TD
21482 # * make ncsa-m rmacs/smacs consistent with sgr -TD
21483 # * add sgr, rc/sc and ech to syscons entries -TD
21484 # * add function-keys to decansi -TD
21485 # * add sgr to mterm-ansi -TD
21486 # * add sgr, civis, cnorm to emu -TD
21487 # * correct/simplify cup in addrinfo -TD
21488 # * corrections for gnome and konsole entries
21489 # (Redhat Bugzilla #122815) -Hans de Goede
21490 # * modify DEC entries (vt220, etc), to add sgr string, and to use
21491 # ISO-2022 strings for rmacs/smacs -TD
21494 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
21497 # * improved putty entry -Robert de Bath
21500 # * remove dch/dch1 from rxvt because they are implemented inconsistently
21501 # with the common usage of bce/ech -TD
21502 # * remove khome from vt220 (vt220's have no home key) -TD
21503 # * add rxvt+pcfkeys -TD
21506 # * modify several entries to ensure xterm mouse and cursor visibility
21507 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
21508 # Eterm, screen. (The xterm entries are left alone - old ones for
21509 # compatibility, and the new ones do not require this change) -TD
21512 # * add morphos entry -Pavel Fedin
21513 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
21514 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
21517 # * update wsvt25 entry -TD
21520 # * update pairs for xterm-88color and xterm-256color to reflect the
21521 # ncurses extended-color support -TD
21524 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
21525 # * add aixterm-16color to demonstrate 16-color capability -TD
21528 # * add media-copy to vt100 -TD
21529 # * corrected acsc string for vt52 -TD
21532 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
21534 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
21537 # * re-corrected acsc string for vt52 -TD
21540 # * corrected sun-il sgr string which referred to bold and underline -TD
21541 # * add sun-color entry -TD
21544 # * modify sgr0 in several entries to reset alternate-charset as in the
21546 # * modify sgr string of prism9 to better match the individual
21550 # * correct order of use= in rxvt-basic -TD
21553 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
21556 # * other minor fixes to cygwin based on tack -TD
21557 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
21560 # * add nsterm-16color entry -TD
21561 # * remove ncv flag from xterm-16color -TD
21562 # * remove setf/setb from xterm-256color to match xterm #209 -TD
21563 # * update mlterm entry to 2.9.2 -TD
21566 # * fixes to make nsterm-16color match report
21567 # by Christian Ebert -Alain Bench
21570 # * add xterm+256color building block -TD
21571 # * add gnome-256color, putty-256color, rxvt-256color -TD
21574 # * add hpterm-color -TD
21577 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
21578 # * add gnome-fc5 (prompted by GenToo #122566) -TD
21579 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
21580 # * improve xterm-256color by combining the ibm+16color setaf/setab
21581 # strings with SGR 48. The setf/setb strings also are cancelled here
21582 # rather than omitted so derived entries will cancel those also -Alain
21586 # * add some notes regarding copyright to terminfo.src -TD
21587 # * use rxvt+pcfkeys in Eterm -TD
21588 # * remove km and flash from gnome, Eterm and rxvt since they do not work
21589 # as one would expect (km sends ESC rather than setting the 8th bit
21591 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
21592 # * add konsole-solaris -TD
21595 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
21596 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
21597 # * modify xterm-24 to inherit from "xterm" -TD
21598 # * add xiterm entry -TD
21599 # * add putty-vt100 entry -TD
21600 # * corrected spelling of Michael A Dorman's name, prompted by
21601 # http://www.advogato.org/person/mdorman/diary.html -TD
21604 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
21605 # * update xterm+pcfkeys to match xterm #216 -TD
21608 # * make descriptions of xterm entries consistent with its terminfo -TD
21611 # * add xfce, mgt -TD
21614 # * correct acsc string in kterm -TD
21617 # * add kon entry -TD
21618 # * remove invis from linux and related entries, add klone+sgr8 for those
21619 # that implement the feature (or have not been shown to lack it) -TD
21622 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
21623 # * minor improvements to rxvt+pcfkeys -TD
21626 # * fix a few typos in if/then/else expressions -TD
21629 # * add several GNU Screen variations with 16- and 256-colors, and
21630 # status line (Alain Bench).
21633 # * add Newbury Data entries (Jean-Charles Billaud).
21636 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
21639 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
21640 # * add konsole-256color entry -TD
21643 # * add 9term entry (request by Juhapekka Tolvanen) -TD
21646 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
21647 # * add shift-control- and control-modified keys for rxvt editing
21649 # * update mlterm entry to 2.9.3 -TD
21650 # * add mlterm+pcfkeys -TD
21653 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
21654 # xterm+pcc0, etc., to make the corresponding building blocks reflect
21655 # xterm's capabilities -TD
21656 # * add mrxvt entry -TD
21657 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
21660 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
21663 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
21664 # xterm starting with patch #216 -TD
21665 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
21666 # to match xterm #230 -TD
21667 # * extend xterm+pccX entries to match xterm #230 -TD
21668 # * add xterm+app, xterm+noapp, from xterm #230 -TD
21669 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
21672 # * add screen.rxvt -TD
21674 # The following sets edit modes for GNU EMACS.
21679 # comment-start-skip:"^#+"
21680 # comment-start:"# "
21681 # compile-command:"tic -c terminfo.master"
21683 ######## SHANTIH! SHANTIH! SHANTIH!