1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2019/10/26 17:00:56 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing,
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+cup|ANSI absolute cursor-addressing,
355 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
356 ansi+rep|ANSI repeat-character,
357 rep=%p1%c\E[%p2%{1}%-%db,
358 ansi+idl1|ANSI insert/delete one line,
360 ansi+idl|ANSI insert/delete lines,
361 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
362 ansi+idc1|ANSI insert/delete one character,
363 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
364 ansi+idc|ANSI insert/delete characters,
365 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
366 ansi+arrows|ANSI normal-mode cursor-keys,
367 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
369 ansi+sgr|ANSI graphic renditions,
370 blink=\E[5m, invis=\E[8m, rev=\E[7m,
371 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
373 ansi+sgrso|ANSI standout only,
374 rmso=\E[m, smso=\E[7m,
375 ansi+sgrul|ANSI underline only,
376 rmul=\E[m, smul=\E[4m,
377 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
379 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
381 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
382 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
384 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
386 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
388 # ECMA-48 does not specify scroll-regions, but most people consider it to be
389 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
390 ansi+csr|ANSI scroll-region plus cursor save & restore,
391 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
393 # The normal (ANSI) flavor of "media copy" building block asserts that
394 # characters sent to the printer do not echo on the screen. DEC terminals
395 # can also be put into autoprinter mode, where each line is sent to the
396 # printer as you move off that line, e.g., by a carriage return.
397 ansi+pp|ANSI printer port,
399 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
400 dec+pp|DEC autoprinter mode,
401 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
403 # The IBM PC alternate character set. Plug this into any Intel console entry.
404 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
405 # ROM graphics for control characters such as the diamond, up- and down-arrow.
406 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
407 # will work with any Intel console, they all seem to have inherited \E[11m
408 # from the ANSI.SYS de-facto standard.
409 klone+acs|alternate character set for ansi.sys displays,
410 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
411 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
412 \301w\302x\263y\363z\362{\343|\330}\234~\376,
413 rmacs=\E[10m, smacs=\E[11m,
415 # Highlight controls corresponding to the ANSI.SYS standard. Most
416 # console drivers for Intel boxes obey these. Makes the same assumption
417 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
418 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
419 klone+sgr|attribute control for ansi.sys displays,
420 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
421 rmso=\E[m, rmul=\E[m,
422 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
427 # Most Intel boxes do not treat "invis" (invisible) text.
428 klone+sgr8|attribute control for ansi.sys displays,
430 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
431 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
434 # Highlight controls corresponding to the ANSI.SYS standard. *All*
435 # console drivers for Intel boxes obey these. Does not assume \E[11m will
436 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
437 # diamond and arrow characters under curses.
438 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
439 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
441 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
442 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
443 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
446 # KOI8-R (RFC1489) acs (alternate character set)
447 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
448 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
449 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
450 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
451 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
453 rmacs=\E[10m, smacs=\E[11m,
455 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
456 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
457 # but equivalent strings that don't rely on that coincidence:
458 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
459 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
460 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
461 # They match a subset of ECMA-48.
462 klone+color|color control for ansi.sys and ISO6429-compatible displays,
463 colors#8, ncv#3, pairs#64,
464 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 # This is better than klone+color, it doesn't assume white-on-black as the
467 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
468 ecma+color|color control for ECMA-48-compatible terminals,
470 colors#8, ncv#3, pairs#64,
471 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
473 ecma+italics|ECMA-48 italics,
474 ritm=\E[23m, sitm=\E[3m,
476 # Attribute control for ECMA-48-compatible terminals
477 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
478 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
480 ecma+strikeout|ECMA-48 strikeout/crossed-out,
481 rmxx=\E[29m, smxx=\E[9m,
483 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
485 ecma+index|ECMA-48 scroll up/down,
486 indn=\E[%p1%dS, rin=\E[%p1%dT,
488 # For comparison, here are all the capabilities implied by the Intel
489 # Binary Compatibility Standard (level 2) that fit within terminfo.
490 # For more detail on this rather pathetic standard, see the comments
491 # near the end of this file.
492 ibcs2|Intel Binary Compatibility Standard prescriptions,
493 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
494 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
495 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
496 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
497 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
498 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
499 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
501 #### ANSI/ECMA-48 terminals and terminal emulators
503 # See near the end of this file for details on ANSI conformance.
504 # Don't mess with these entries! Lots of other entries depend on them!
506 # This section lists entries in a least-capable to most-capable order.
507 # if you're in doubt about what `ANSI' matches yours, try them in that
508 # order and back off from the first that breaks.
510 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
511 # and more than one page of memory. It uses local motions instead of
512 # direct cursor addressing, and makes almost no assumptions. It does
513 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
514 ansi-mr|mem rel cup ansi,
516 cols#80, lines#24, use=vanilla, use=ansi+erase,
519 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
520 # beware of screen size problems and memory relative cursor addressing.
521 ansi-mini|any ansi terminal with pessimistic assumptions,
523 cols#80, lines#24, use=vanilla, use=ansi+cup,
526 # ansi-mtabs adds relative addressing and minimal tab support
527 ansi-mtabs|any ansi terminal with pessimistic assumptions,
529 ht=^I, use=ansi-mini, use=ansi+local1,
531 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
533 # The following is an entry for the full ANSI 3.64 (1977). It lacks
534 # padding, but most terminals using the standard are "fast" enough
535 # not to require any -- even at 9600 bps. If you encounter problems,
536 # try including the padding specifications.
538 # Note: the :as: and :ae: specifications are not implemented here, for
539 # the available termcap documentation does not make clear WHICH alternate
540 # character set to specify. ANSI 3.64 seems to make allowances for several.
541 # Please make the appropriate adjustments to fit your needs -- that is
542 # if you will be using alternate character sets.
544 # There are very few terminals running the full ANSI 3.64 standard,
545 # so I could only test this entry on one verified terminal (Visual 102).
546 # I would appreciate the results on other terminals sent to me.
548 # Please report comments, changes, and problems to:
550 # U.S. MAIL: Hugh Hansard
553 # Atlanta, GA. 30322.
555 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
557 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
558 ansi77|ANSI 3.64 standard 1977 version,
560 cols#80, it#8, lines#24,
561 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
562 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
563 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
564 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
565 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
566 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
567 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
568 smso=\E[7m, smul=\E[4m,
570 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
571 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
572 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
573 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
574 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
575 # to confuse many emulators. On the other hand, we can count on these programs
576 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
577 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
578 # ANSI.SYS influence.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
580 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
582 cols#80, it#8, lines#24,
583 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
584 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
585 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
586 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
587 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
589 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
590 lines#25, use=pcansi-m,
591 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
592 lines#33, use=pcansi-m,
593 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
594 lines#43, use=pcansi-m,
595 # The color versions. All PC emulators do color...
596 pcansi|ibm-pc terminal programs claiming to be ansi,
597 use=klone+color, use=pcansi-m,
598 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
599 lines#25, use=pcansi,
600 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
601 lines#33, use=pcansi,
602 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
603 lines#43, use=pcansi,
605 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
606 # If you want pound signs rather than dollars, replace `B' with `A'
607 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
608 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
609 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
611 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
612 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
613 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
614 ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
615 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
616 mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
617 s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
618 vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
620 ansi+enq|ncurses extension for ANSI ENQ,
621 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
624 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
625 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
626 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
627 ansi|ansi/pc-term compatible with color,
628 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
630 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
631 # all the normal ANSI stuff with no extensions. It assumes
632 # insert/delete line/char is there, so it won't work with
633 # vt100 clones. It assumes video attributes for bold, blink,
634 # underline, and reverse, which won't matter much if the terminal
635 # can't do some of those. Padding is assumed to be zero, which
636 # shouldn't hurt since xon/xoff is assumed.
637 ansi-generic|ansiterm|generic ansi standard terminal,
639 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
640 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
641 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
642 use=ansi+sgrbold, use=ansi+arrows,
644 #### DOS ANSI.SYS variants
646 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
647 # documentation (except for the keyboard key reassignment feature, which
648 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
649 # though undocumented. The <pfkey> capability is untested but should work for
650 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
651 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
652 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
653 OTbs, am, mir, msgr, xon,
655 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
656 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
657 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
658 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
659 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
660 u7=\E[6n, use=klone+color, use=klone+sgr8,
662 # Keypad: Home=\0G Up=\0H PrPag=\0I
663 # ka1,kh kcuu1 kpp,ka3
665 # Left=\0K 5=\0L Right=\0M
668 # End=\0O Down=\0P NxPag=\0Q
669 # kc1,kend kcud1 kc3,knp
674 # On keyboard with 12 function keys,
675 # shifted f-keys: F13-F24
676 # control f-keys: F25-F36
677 # alt f-keys: F37-F48
678 # The shift/control/alt keys do not modify each other, but alt overrides both,
679 # and control overrides shift.
681 # <pfkey> capability for F1-F48 -TD
682 ansi.sys|ANSI.SYS 3.1 and later versions,
683 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
684 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
685 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
686 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
687 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
688 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
689 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
690 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
691 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
692 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
693 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
694 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
695 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
696 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
697 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
701 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
702 # This should only be used when the terminal emulator cannot redefine the keys.
703 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
704 # definitions must be restored. If the terminal emulator is quit while in vi
705 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
706 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
707 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
708 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
709 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
710 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
711 # Consequently the End keypad key could not be set (it is relatively safe and
712 # actually useful because it sends ^@ O, which beeps and opens a line above).
713 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
714 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
715 \svi\s9-29-86\n\E[;75;8p,
716 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
717 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
718 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
719 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
722 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
723 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
724 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
725 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
728 # See ansi.sysk and nansi.sys above.
729 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
730 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
731 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
732 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
735 #### Atari ST terminals
737 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
739 tw52|tw52-color|Toswin window manager with color,
741 colors#16, pairs#0x100,
742 oc=\Eb?\Ec0, op=\Eb?\Ec0,
743 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
745 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
747 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
749 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
752 tw52-m|Toswin window manager monochrome,
755 bold=\Eya, dch1=\Ea, dim=\EyB,
756 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
757 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
758 smso=\EyQ, smul=\EyH, use=at-m,
759 tt52|Atari TT medium and high resolution,
760 lines#30, use=at-color,
761 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
763 colors#16, pairs#0x100,
764 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
765 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
768 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
770 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
773 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
775 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
776 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
777 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
778 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
780 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
781 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
782 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
783 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
786 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
788 cols#80, it#8, lines#24,
789 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
790 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
791 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
792 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
793 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
794 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
795 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
796 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
797 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
798 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
799 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
800 tw100|toswin vt100 window mgr,
802 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
803 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
805 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
806 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
807 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
808 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
809 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
810 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
811 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
812 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
813 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
814 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
815 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
816 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
817 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
818 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
819 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
820 rmso=\E[m, rmul=\E[m,
821 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
823 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
824 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
826 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
827 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
829 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
830 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
831 # The entries for stv52 and stv52pc probably need a revision.
832 stv52|MiNT virtual console,
834 cols#80, it#8, lines#30,
835 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
836 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
837 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
838 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
839 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
840 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
841 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
842 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
843 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
844 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
845 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
846 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
847 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
848 stv52pc|MiNT virtual console with PC charset,
850 cols#80, it#8, lines#30,
851 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
852 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
853 \363z\362{\343|\366}\234~\371,
854 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
855 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
856 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
857 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
858 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
859 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
860 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
861 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
862 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
863 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
864 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
865 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
868 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
871 cols#80, it#8, lines#25,
872 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
873 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
874 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
875 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
876 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
877 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
878 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
880 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
881 # MiNT VT52 emulation. 80 columns, 25 rows.
882 # MiNT is Now TOS, the operating system which comes with all Ataris now
883 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
884 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
885 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
886 st52-old|Atari ST with VT52 emulation,
889 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
890 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
891 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
892 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
893 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
894 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
895 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
896 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
897 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
902 # BeOS entry for Terminal program Seems to be almost ANSI
903 beterm|BeOS Terminal,
904 am, eo, mir, msgr, xenl, xon,
905 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
906 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
908 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
910 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
911 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
912 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
913 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
914 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
915 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
916 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
917 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
918 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
919 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
920 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
921 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
922 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
923 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
924 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
930 # This entry is good for the 1.2.13 or later version of the Linux console.
932 # ***************************************************************************
935 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
936 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
937 # * character. Here are the keymap replacement lines that will set this up: *
939 # keycode 15 = Tab Tab
940 # alt keycode 15 = Meta_Tab
941 # shift keycode 15 = F26
942 # string F26 ="\033[Z"
944 # * This has to use a key slot which is unfortunate (any unused one will *
945 # * do, F26 is the higher-numbered one). The change ought to be built *
946 # * into the kernel tables. *
948 # ***************************************************************************
950 # All linux kernels since 1.2.13 (at least) set the screen size
951 # themselves; this entry assumes that capability.
953 linux-basic|linux console,
954 am, bce, eo, mir, msgr, xenl, xon,
956 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
957 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
958 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
959 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
960 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
961 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
962 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
963 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
964 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
965 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
966 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
967 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
968 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
969 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
970 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
971 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
972 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
973 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
974 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
975 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
976 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
977 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
978 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
979 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
982 linux-m|Linux console no color,
984 setab@, setaf@, setb@, setf@, use=linux,
986 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
987 # and it matters, turn off <ccc>. The %02x escape used to implement this is
988 # not supposedly back-portable to older SV curses (although it has worked fine
989 # on Solaris for several years) and not supported in ncurses versions before
991 linux-c-nc|linux console with color-change,
993 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
994 %02x%p4%{255}%*%{1000}%/%02x,
995 oc=\E]R, use=linux-basic,
996 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
997 linux-c|linux console 1.3.6+ for older ncurses,
999 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1000 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1001 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1002 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1003 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1004 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1005 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1006 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1008 oc=\E]R, use=linux-basic,
1010 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1011 # get a block cursor for cvvis.
1012 # reported by Frank Heckenbach <frank@g-n-u.de>.
1013 linux2.2|linux 2.2.x console,
1014 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1015 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1017 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1018 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1019 # Although the kernel has mappings for these, they were not in the default
1020 # font (tested with Debian and Fedora):
1026 linux2.6|linux 2.6.x console,
1027 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1029 enacs=\E)0, rmacs=^O,
1030 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1031 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1032 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1034 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1035 # It is the same as xterm's erase-saved-lines feature.
1036 linux3.0|linux 3.0 kernels,
1037 E3=\E[3J, use=linux2.6,
1039 # This is Linux console for ncurses.
1040 linux|linux console,
1043 # Subject: linux 2.6.26 vt back_color_erase
1044 # Changes to the Linux console driver broke bce model as reported in
1045 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1047 # http://lkml.org/lkml/2008/4/26/305
1048 # http://lkml.org/lkml/2008/10/3/66
1049 linux2.6.26|linux console w/o bce,
1052 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1053 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1054 ich@, ich1@, use=linux,
1056 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1057 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1058 linux-koi8|linux with koi8 alternate character set,
1059 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1060 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1061 \211w\210x\201y\230z\231{\267|\274~\224,
1062 use=linux, use=klone+koi8acs,
1064 # Another entry for KOI8-r with Qing Long's acsc.
1065 # (which one better complies with the standard?)
1066 linux-koi8r|linux with koi8-r alternate character set,
1067 use=linux, use=klone+koi8acs,
1069 # Entry for the latin1 and latin2 fonts
1070 linux-lat|linux with latin1 or latin2 alternate character set,
1071 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1072 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1073 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1076 # This uses graphics from VT codeset instead of from cp437.
1077 # reason: cp437 (aka "straight to font") is not functional under luit.
1078 # from: Andrey V Lukyanov <land@long.yar.ru>.
1079 linux-vt|linux console using VT codes for graphics,
1080 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1082 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1085 # This is based on the Linux console (relies on the console to perform some
1086 # of the functionality), but does not recognize as many control sequences.
1087 # The program comes bundled with an old (circa 1998) copy of the Linux
1088 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1089 # \E* move cursor to home, as as \E[H
1091 # \EE move cursor to beginning of row
1092 # \E[y,xf same as \E[y,xH
1094 # Note: The status-line support is buggy (dsl does not work).
1095 kon|kon2|jfbterm|Kanji ON Linux console,
1097 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1098 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1102 # Another variant. There are two parts (src, src/lib) with the latter
1103 # comprising the escape-sequence parsing. The copyright notice on that
1104 # says it is based on GTerm by Timothy Miller.
1106 # The original developer "dragchan" has left, but as of March 2017 there is
1107 # (still dead) code from May 2015 here:
1108 # https://github.com/izmntuk/fbterm
1110 # The acsc string may be incorrect.
1112 # Not used here, the program recognizes escapes for italic, underline and
1113 # dim, rendering those as green, cyan and gray respectively.
1114 fbterm|FbTerm for Linux with framebuffer,
1115 colors#0x100, pairs#0x10000,
1116 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1117 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1118 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1119 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1120 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1121 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1122 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1123 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1125 # 16-color linux console entry; this works with a 256-character
1126 # console font but bright background colors turn into dim ones when
1127 # you use a 512-character console font. This uses bold for bright
1128 # foreground colors and blink for bright background colors.
1130 # Interestingly, the original version of this entry in 2009 used a documented
1131 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1132 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1133 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1134 # suggested a different use for that particular code.
1135 linux-16color|linux console with 16 colors,
1136 colors#16, ncv#42, pairs#0x100,
1137 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1138 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1141 # bterm (bogl 0.1.18)
1142 # Implementation is in bogl-term.c
1143 # Key capabilities from linux terminfo entry
1146 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1147 # bterm does not support sgr, since it only processes one parameter -TD
1148 bterm|bogl virtual terminal,
1150 colors#8, cols#80, lines#24, pairs#64,
1151 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1152 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1153 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1154 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1155 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1156 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1157 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1158 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1159 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1160 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1161 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
1162 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1163 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1164 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1169 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1172 cols#80, it#8, lines#25,
1173 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1174 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1175 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1176 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1177 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1178 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1179 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1180 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1181 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1182 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1183 smso=\E[7m, smul=\E[4m,
1184 mach-bold|Mach Console with bold instead of underline,
1185 rmul=\E[0m, smul=\E[1m, use=mach,
1186 mach-color|Mach Console with ANSI color,
1188 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1189 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1191 # From: Samuel Thibault
1192 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1193 # Files: i386/i386at/kd.c
1195 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1197 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1198 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1199 \263y\363z\362{\343|\330}\234~\376,
1200 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1201 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1202 invis=\E[8m, nel=\EE,
1203 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1204 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1205 use=ecma+index, use=mach,
1207 mach-gnu-color|Mach Console with ANSI color,
1209 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1210 setaf=\E[3%p1%dm, use=mach-gnu,
1212 # From: Marcus Brinkmann
1213 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1215 # Comments in the original are summarized here:
1217 # hurd uses 8-bit characters (km).
1219 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1221 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1222 # have the eat_newline_glitch. It doesn't support setting or removing tab
1225 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1226 # one byte instead three.
1228 # <ich1> is not included because hurd has insert mode.
1230 # hurd doesn't use ^J for scrolling, because this could put things into the
1231 # scrollback buffer.
1233 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1234 # This is a GNU extension.
1236 # The original has commented-out ncv, but is restored here.
1238 # Reading the source, RIS resets cnorm, but not xmous.
1239 hurd|The GNU Hurd console server,
1240 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1241 colors#8, it#8, ncv#18, pairs#64,
1242 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1244 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1245 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1246 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1247 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1248 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1249 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1250 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1251 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1252 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m, kb2=\E[G,
1253 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
1254 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
1255 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1256 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1257 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1258 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1259 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1260 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1261 rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
1262 rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
1264 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1265 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1266 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1267 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1268 use=ecma+index, use=ecma+italics,
1274 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1275 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1276 # right corner without triggering a scroll. The ncurses terminfo library can
1277 # handle this case with the <ich1> capability, and prefers <am> for better
1278 # optimization. Bug: The <op> capability resets attributes.
1279 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1280 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1281 qnx|qnx4|qnx console,
1282 daisy, km, mir, msgr, xhpa, xt,
1283 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1284 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1285 \303u\264v\301w\302x\263,
1286 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1287 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1288 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1289 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1290 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1291 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1292 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1293 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1294 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1295 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1296 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1297 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1298 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1299 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1300 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1301 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1302 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1303 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1304 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1305 kext=\377\270, kf1=\377\201, kf10=\377\212,
1306 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1307 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1308 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1309 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1310 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1311 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1312 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1313 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1314 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1315 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1316 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1317 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1318 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1319 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1320 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1321 khlp=\377\350, khome=\377\240, khts=\377\342,
1322 kich1=\377\253, kil1=\377\273, kind=\377\261,
1323 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1324 knp=\377\252, knxt=\377\312, kopn=\377\357,
1325 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1326 kprv=\377\302, krdo=\377\336, kref=\377\354,
1327 kres=\377\360, krfr=\377\347, kri=\377\271,
1328 krmir=\377\313, krpl=\377\362, krst=\377\352,
1329 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1330 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1331 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1332 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1333 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1337 qnxt|qnxt4|QNX4 terminal,
1340 qnxm|QNX4 with mouse events,
1342 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1343 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1344 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1345 smicm=\E/>2h, use=qnx4,
1350 # Monochrome QNX4 terminal or console. Setting this terminal type will
1351 # allow an application running on a color console to behave as if it
1352 # were a monochrome terminal. Output will be through stdout instead of
1353 # console writes because the term routines will recognize that the
1354 # terminal name starts with 'qnxt'.
1356 qnxtmono|Monochrome QNX4 terminal or console,
1360 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1361 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1362 # (TD: derive from original qnx4 entry)
1363 qnxt2|qnx 2.15 serial terminal,
1365 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1366 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1368 # QNX ANSI terminal definition
1371 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1372 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1373 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1374 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
1375 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1376 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1377 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1378 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1379 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1380 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1381 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1382 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1383 ind=\E[S, invis=\E[9m,
1384 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1385 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1386 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1387 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1388 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1389 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1390 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1391 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1392 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1393 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1394 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1395 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1396 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1397 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1398 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1399 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1400 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1401 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1402 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1403 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1404 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1405 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1406 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1407 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, rmacs=^O,
1408 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
1409 rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1410 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1411 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1413 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1415 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1416 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1417 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1418 smul=\E[4m, tbc=\E[3g,
1419 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ecma+index,
1421 qansi|QNX ansi with console writes,
1422 daisy, xhpa, use=qansi-g,
1424 qansi-t|QNX ansi without console writes,
1427 qansi-m|QNX ansi with mouse,
1429 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1430 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1431 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1432 smicm=\E[>2h, use=qansi,
1434 qansi-w|QNX ansi for windows,
1439 # SCO console and SOS-Syscons console for 386bsd
1440 # (scoansi: had unknown capabilities
1441 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1442 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1443 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1444 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1445 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1446 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1447 # on the <smacs>=\E[12m -- esr)
1449 # klone+sgr-dumb is an error since the acsc does not match -TD
1451 # In this description based on SCO's keyboard(HW) manpage list of default
1452 # function key values:
1453 # F13-F24 are shifted F1-F12
1454 # F25-F36 are control F1-F12
1455 # F37-F48 are shift+control F1-F12
1457 # hpa/vpa work in the console, but not in scoterm:
1461 # SCO's terminfo uses
1464 # which do not work (console or scoterm).
1466 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1467 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1468 OTbs, am, bce, eo, xon,
1469 colors#8, cols#80, it#8, lines#25, pairs#64,
1470 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
1471 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
1473 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1474 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1475 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1476 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1477 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1478 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1479 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1480 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1481 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
1482 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
1483 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
1484 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1485 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1486 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1487 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1488 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1489 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1490 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1491 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1492 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1493 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1494 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1495 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1496 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1497 smul=\E[4m, use=ecma+index,
1498 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1500 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1501 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1502 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1503 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1504 %p7%t;8%;%?%p9%t;12%e;10%;m,
1505 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1506 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1507 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1508 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1509 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1511 # make this easy to change...
1512 scoansi|SCO Extended ANSI standard crt,
1517 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1518 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1519 # for the application keypad mode. We have added iris-ansi-ap rather than
1520 # change the original to keypad mode.
1522 # (iris-ansi: added rmam/smam based on init string -- esr)
1524 # This entry, and those derived from it, is used in xwsh (also known as
1525 # winterm). Some capabilities that do not fit into the terminfo model
1526 # include the shift- and control-functionkeys:
1528 # F1-F12 generate different codes when shift or control modifiers are used.
1532 # control-F1 \E[025q
1534 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1535 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1537 # The cursor keys also have different codes:
1538 # control-up \E[162q
1539 # control-down \E[165q
1540 # control-left \E[159q
1541 # control-right \E[168q
1544 # shift-down \E[164q
1545 # shift-left \E[158q
1546 # shift-right \E[167q
1548 # control-tab \[072q
1550 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1552 cols#80, it#8, lines#40,
1553 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1554 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1555 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1556 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1557 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1558 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1559 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1560 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1561 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1562 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1563 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1564 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1565 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1566 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1567 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1568 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1569 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1570 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1571 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1573 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1574 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1575 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1577 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1578 # (T.Dickey 98/1/24)
1579 iris-color|xwsh|IRIX ANSI with color,
1581 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1582 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1583 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1584 use=ecma+italics, use=vt100+enq, use=klone+color,
1587 #### OpenBSD consoles
1589 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1591 # The following terminal descriptions for the AMD/Intel PC console
1592 # were prepared based on information contained in the OpenBSD-4.9
1593 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1595 # Added bce based on testing with tack -TD
1596 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1597 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1599 # Notes from testing with vttest:
1600 # fails wrapping test
1602 # identifies as vt200 with selective erase, but does not implement DECSCA
1605 # ESC # 8 DEC Screen Alignment Test (DECALN).
1606 # CSI ? 5 h Reverse Video (DECSCNM).
1608 pccon+keys|OpenBSD PC keyboard keys,
1609 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1610 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1611 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1612 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1613 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1614 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1615 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1616 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1618 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1619 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
1621 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1623 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1624 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1626 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1627 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1629 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1630 # underline renders as color
1631 pccon+colors|ANSI colors for OpenBSD PC console,
1633 colors#8, ncv#2, pairs#64,
1634 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1635 pccon+base|base capabilities for OpenBSD PC console,
1636 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1637 cols#80, it#8, lines#24,
1638 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
1639 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
1640 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1641 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1642 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1643 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
1644 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
1646 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1647 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1648 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1649 use=pccon0-m, use=pccon+colors,
1650 pccon-m|OpenBSD PC console without colors,
1651 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1652 pccon|OpenBSD PC console,
1653 use=pccon-m, use=pccon+colors,
1655 #### NetBSD consoles
1657 # pcvt termcap database entries (corresponding to release 3.31)
1658 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1660 # (For the terminfo master file, I translated these into terminfo syntax.
1661 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1662 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1663 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1665 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1666 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1667 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1668 pcvtXX|pcvt vt200 emulator (DEC VT220),
1669 am, km, mir, msgr, xenl,
1671 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1673 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1674 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1675 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1676 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1677 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1678 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1679 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1680 il=\E[%p1%dL, il1=\E[L, ind=\ED,
1681 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1682 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1683 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1684 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1685 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1686 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1687 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1688 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1689 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1690 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1691 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1694 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1695 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1696 # 50 lines entries; 80 columns
1697 pcvt25|dec vt220 emulation with 25 lines,
1699 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1700 pcvt28|dec vt220 emulation with 28 lines,
1702 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1703 pcvt35|dec vt220 emulation with 35 lines,
1705 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1706 pcvt40|dec vt220 emulation with 40 lines,
1708 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1709 pcvt43|dec vt220 emulation with 43 lines,
1711 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1712 pcvt50|dec vt220 emulation with 50 lines,
1714 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1716 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1717 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1718 # 50 lines entries; 132 columns
1719 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1721 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1722 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1724 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1725 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1727 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1728 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1730 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1731 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1733 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1734 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1736 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1738 # OpenBSD implements a color variation
1739 pcvt25-color|dec vt220 emulation with 25 lines and color,
1741 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1742 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1743 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1744 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1745 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1748 # Terminfo entries to enable the use of the ncurses library in colour on a
1749 # NetBSD-arm32 console (only tested on a RiscPC).
1750 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1751 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1752 # typo in invis - TD
1753 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1754 am, bce, msgr, xenl, xon,
1755 cols#80, it#8, lines#30,
1756 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1757 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1758 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1759 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1760 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1761 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1762 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1763 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1764 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1765 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1766 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1767 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1768 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1769 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1770 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1772 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1773 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1774 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1775 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1778 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1779 cols#132, lines#50, use=arm100,
1781 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1782 # manufactured by Sharp for the Japanese market.
1783 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1784 x68k|x68k-ite|NetBSD/x68k ITE,
1786 kclr=\E[9~, khlp=\E[28~, use=vt220,
1789 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1791 # (still unfinished, but good enough so far.)
1792 ofcons|DNARD OpenFirmware console,
1795 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1796 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1797 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1798 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1799 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1800 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1801 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1802 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1803 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1804 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1805 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1806 rmso=\2330m, rmul=\2330m,
1807 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1808 %;%?%p1%p3%|%t;7%;m,
1809 sgr0=\2330m, smso=\2337m, smul=\2334m,
1811 # NetBSD "wscons" emulator in vt220 mode.
1812 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1813 # The emulator renders underlined text in red. Colors are otherwise usable.
1815 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1816 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1817 # vt220 screens in vttest do not work with this emulator. For instance, it
1818 # identifies itself (primary DA response) as a vt220 with selective erase. But
1819 # the selective erase feature does not work. The secondary response is copied
1820 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1821 # the level of detail in a termcap, it is a passable emulator, since ECH does
1822 # work. Don't use it on a VMS system -TD
1823 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1825 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1826 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1827 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1828 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1829 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1830 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1833 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1836 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1838 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1839 # Initial testing set TERM=xterm, based on comments by developers, found too
1840 # many differences to continue in that path. However, test-results may be
1841 # useful to people curious about compatibility with xterm.
1843 # Testing with tack:
1845 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1846 # There is color-bleeding in the color-pairs screen.
1847 # Attributes do not work with color
1849 # Failed: kf1-kf4, kf13-kf48, khome, kend
1850 # (effectively xterm-r6 for function-keys)
1851 # None of the function or cursor key-modifiers are encoded.
1852 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1854 # Testing with vttest:
1855 # -------------------
1856 # Identifies as vt220 with selective erase
1857 # (however, selective erase refers to DECSCA, SPA)
1858 # Does not implement vt52
1859 # Uses spaces to simulate double-size characters
1860 # Does not support 8-bit controls
1861 # Does not support VT220 reports
1862 # Does not support send/receive mode
1863 # Supports ECH (like rxvt)
1864 # Does not support DECSCA
1865 # Does not support any of the ISO-6429 cursor-movement
1866 # Does not support any of the ISO-6429 miscellaneous tests
1867 # (SL/SR also leave unexpected char on screen too)
1868 # Background does not change in menu 11.6.9 (SGR 22-27)
1869 # None of the xterm special features tests work
1870 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1873 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1875 rcons|BSD rasterconsole,
1877 # Color version of above. Color currently only provided by NetBSD.
1878 rcons-color|BSD rasterconsole with ANSI color,
1881 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1883 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1884 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1885 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1886 # -- compare with cons25w
1887 mgterm|MGL/MGL2 MobileGear Graphic Library,
1888 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1889 colors#8, cols#80, it#8, lines#18, pairs#64,
1890 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1891 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1892 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1893 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1894 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1895 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1896 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1897 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1898 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1899 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1900 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1901 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1902 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
1903 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1904 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
1905 vpa=\E[%i%p1%dd, use=ecma+index,
1907 #### FreeBSD console entries
1909 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1910 # Andrey Chernov maintains the FreeBSD termcap distributions.
1912 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1913 # or comment out the :cb: capability in the console entry.
1915 # Alexander Lukyanov reports:
1916 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1917 # Now el1 clears not only to the line beginning, but also a large chunk
1918 # of previous line. But there is another bug - ech does not work at all.
1922 # common entry without semigraphics
1923 # Bug: The <op> capability resets attributes.
1924 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1925 # instance el1 does if the cursor is moved to the right margin first. Removed
1926 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1928 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1929 # Note that this disables standout with color.
1931 # The emulator sends difference strings based on shift- and control-keys,
1933 # F13-F24 are shifted F1-F12
1934 # F25-F36 are control F1-F12
1935 # F37-F48 are shift+control F1-F12
1936 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1937 am, bce, bw, eo, msgr, npc,
1938 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1940 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1941 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1943 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1944 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1945 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1946 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1947 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1948 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1949 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
1950 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
1951 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
1952 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
1953 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
1954 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
1955 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
1956 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
1957 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
1958 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
1959 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
1960 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
1962 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
1964 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
1965 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1966 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
1967 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
1970 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
1971 kbs=^?, kdch1=\E[3~, use=cons25,
1972 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1974 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1975 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1976 smul=\E[4m, use=cons25,
1977 cons30|ansi80x30|freebsd console (30-line ansi mode),
1978 lines#30, use=cons25,
1979 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1980 lines#30, use=cons25-m,
1981 cons43|ansi80x43|freebsd console (43-line ansi mode),
1982 lines#43, use=cons25,
1983 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1984 lines#43, use=cons25-m,
1985 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1986 lines#50, use=cons25,
1987 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1988 lines#50, use=cons25-m,
1989 cons60|ansi80x60|freebsd console (60-line ansi mode),
1990 lines#60, use=cons25,
1991 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1992 lines#60, use=cons25-m,
1993 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1994 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
1995 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
1998 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2000 op@, rmul=\E[m, setab@, setaf@,
2001 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2002 %t;30;1%;%?%p6%t;1%;m,
2003 smul=\E[4m, use=cons25r,
2004 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2005 lines#50, use=cons25r,
2006 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2007 lines#50, use=cons25r-m,
2008 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2009 lines#60, use=cons25r,
2010 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2011 lines#60, use=cons25r-m,
2012 # ISO 8859-1 FreeBSD console
2013 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2014 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2015 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2016 \226v\227w\230x\231y\232z\233~\237,
2018 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2020 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2021 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2022 smul=\E[4m, use=cons25l1,
2023 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2024 lines#50, use=cons25l1,
2025 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2026 lines#50, use=cons25l1-m,
2027 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2028 lines#60, use=cons25l1,
2029 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2030 lines#60, use=cons25l1-m,
2032 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2033 # which is intended to be xterm-compatible. See for example
2034 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2035 # in particular scterm-teken.c
2037 # For FreeBSD 9 and 10:
2038 # --------------------
2039 # The /etc/ttys entries for console and other ttys are all configured to set
2042 # Testing with tack:
2043 # There is no VT100 line-drawing (uses +'s and -'s)
2044 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2046 # Testing with vttest:
2047 # Menu 2 diamonds don't work, blink ditto, light background ditto
2048 # The terminal identifies itself as VT100 with AVO
2049 # There is no VT52 support
2050 # There is no doublesize character support
2051 # The terminal supports ECH (like rxvt)
2052 # The terminal does not support send/receive mode
2053 # The terminal supports all of the ISO-6429 cursor-movement
2054 # The terminal supports some of the ISO-6429 miscellaneous tests
2055 # (SL/SR also leave unexpected char on screen too)
2057 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2058 # the cells which happen to have ASCII control-character values:
2059 # - ^X arrow pointing up
2060 # . ^Y arrow pointing down
2064 # Those are removed from this entry's acsc string to avoid confusion.
2065 # The resulting description provides correct line-drawing and function-keys -TD
2066 teken|syscons with teken,
2068 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2069 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2070 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2071 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2072 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2073 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2074 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2075 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2076 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2077 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2079 #### 386BSD and BSD/OS Consoles
2082 # This was the original 386BSD console entry (I think).
2083 # Some places it's named oldpc3|oldibmpc3.
2084 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2085 origpc3|origibmpc3|IBM PC 386BSD Console,
2086 OTbs, am, bw, eo, xon,
2088 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2090 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2091 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2092 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2093 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2094 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2095 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2097 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2098 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2101 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2102 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2103 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2104 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2106 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2107 # Note, the emulator supports many of the additional console features
2108 # listed in the iBCS2 (e.g. character-set selection) though not all
2109 # are described here. This entry really ought to be upgraded.
2110 # Also note, the console will also work with fewer lines after doing
2111 # "stty rows NN", e.g. to use 24 lines.
2112 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2113 # Bug: The <op> capability resets attributes.
2114 bsdos-pc|IBM PC BSD/OS Console,
2115 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2116 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2117 use=bsdos-pc-nobold,
2119 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2120 use=klone+color, use=bsdos-pc-m,
2122 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2123 OTbs, am, eo, km, xon,
2124 cols#80, it#8, lines#25,
2125 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2126 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2127 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2128 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2129 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2130 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2131 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2132 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2133 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2136 # Old names for BSD/OS PC console used in releases before 4.1.
2137 pc3|BSD/OS on the PC Console,
2138 use=bsdos-pc-nobold,
2139 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2142 # BSD/OS on the SPARC
2143 bsdos-sparc|Sun SPARC BSD/OS Console,
2146 # BSD/OS on the PowerPC
2147 bsdos-ppc|PowerPC BSD/OS Console,
2152 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2154 # Actually (TD pointed this out at the time the acsc string was added):
2155 # vt52 shouldn't define full acsc since most of the cells don't match.
2156 # see vt100 manual page A-31. This is the list that does match:
2165 # The line-drawing happens to work in several terminal emulators, but should
2166 # not be used as a guide to the capabilities of the vt52. Note in particular
2167 # that vt52 does not support line-drawing characters (the scan-X values refer
2168 # to a crude plotting feature) -TD
2171 cols#80, it#8, lines#24,
2172 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
2173 cub1=\ED, cud1=\EB, cuf1=\EC,
2174 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2175 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2176 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
2178 #### DEC VT100 and compatibles
2180 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2181 # and micro consoles can be found in the `obsolete' section. More details on
2182 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2183 # found near the end of this file.
2185 # Except where noted, these entries are DEC's official terminfos.
2186 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2187 # Engineering for more information. Updated terminfos and termcaps
2188 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2190 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2191 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2192 # its name to Boundless Technologies; see http://www.boundless.com.
2195 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2196 # certainly includes what DEC called the `Level 1 editing extension' codes;
2197 # only the very oldest VT100s lacked these and there probably aren't any of
2198 # those left alive. To capture these, use one of the VT102 entries.
2200 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2201 # since the cursor is left in a different position while in the
2202 # weird state (concept at beginning of next line, vt100 at end
2203 # of this line) so all versions of vi before 3.7 don't handle
2204 # <xenl> right on vt100. The correct way to handle <xenl> is when
2205 # you output the char in column 80, immediately output CR LF
2206 # and then assume you are in column 1 of the next line. If <xenl>
2207 # is on, am should be on too.
2209 # I assume you have smooth scroll off or are at a slow enough baud
2210 # rate that it doesn't matter (1200? or less). Also this assumes
2211 # that you set auto-nl to "on", if you set it off use vt100-nam
2214 # The padding requirements listed here are guesses. It is strongly
2215 # recommended that xon/xoff be enabled, as this is assumed here.
2217 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2218 # tab settings are in non-volatile memory and don't need to be
2219 # reset upon login. Also setting the number of columns glitches
2220 # the screen annoyingly. You can type "reset" to get them set.
2222 # The VT100 series terminals have cursor ("arrows") keys which can operate
2223 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2224 # is the reset state, and is assumed to be the normal state. Application
2225 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2226 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2227 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2228 # was provided primarily as an aid to the porting of VT52 applications. It is
2229 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2230 # applications such as vi will always transmit the <smkx> string. Therefore,
2231 # the definitions for the cursor keys are made to match what the terminal
2232 # transmits after the <smkx> string is transmitted. If the <smkx> string
2233 # is a null string or is not defined, then cursor keys are assumed to be in
2234 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2235 # else the application may fail. It is also expected that applications will
2236 # always transmit the <rmkx> string to the terminal before they exit.
2238 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2239 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2240 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2241 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2242 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2243 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2244 # Enter key transmits the same as the Return key (Note: the Return key
2245 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2246 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2247 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2248 # is normally in Numeric Mode. If an application requires that the keypad be
2249 # in Application Mode then it is expected that the user, or the application,
2250 # will set the TERM environment variable to point to a terminfo entry which has
2251 # defined the <smkx> string to include the codes that switch the keypad into
2252 # Application Mode, and the terminfo entry will also define function key
2253 # fields to match the Application Mode control codes. If the <smkx> string
2254 # is a null string or is not defined, then the keypad is assumed to be in
2255 # Numeric Mode. If the <smkx> string switches the keypad into Application
2256 # Mode, it is expected that the <rmkx> string will contain the control codes
2257 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2258 # applications which transmit the <smkx> string will also always transmit the
2259 # <rmkx> string to the terminal before they exit.
2261 # Here's a diagram of the VT100 keypad keys with their bindings.
2262 # The top line is the name of the key (some DEC keyboards have the keys
2263 # labelled somewhat differently, like GOLD instead of PF1, but this is
2264 # the most "official" name). The second line is the escape sequence it
2265 # generates in Application Keypad mode (where "$" means the ESC
2266 # character). The third line contains two items, first the mapping of
2267 # the key in terminfo, and then in termcap.
2268 # _______________________________________
2269 # | PF1 | PF2 | PF3 | PF4 |
2270 # | $OP | $OQ | $OR | $OS |
2271 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2273 # | $Ow | $Ox | $Oy | $Om |
2274 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2276 # | $Ot | $Ou | $Ov | $Ol |
2277 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2279 # | $Oq | $Or | $Os | enter |
2280 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2283 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2285 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2286 # terminfo guidelines. That is a compromise used to assign the remaining
2287 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2289 vt100+keypad|dec vt100 numeric keypad no fkeys,
2290 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2291 vt100+pfkeys|dec vt100 numeric keypad,
2292 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2294 vt100+fnkeys|dec vt100 numeric keypad,
2295 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2296 kf9=\EOw, use=vt100+pfkeys,
2298 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2299 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2300 # use the 5-key arrangement to model the arrow keys as suggested in the
2301 # terminfo guidelines:
2302 # _______________________________________
2303 # | PF1 | PF2 | PF3 | PF4 |
2304 # | $OP | $OQ | $OR | $OS |
2305 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2307 # | $Ow | $Ox | $Oy | $Om |
2308 # |_ka1__K1_|_________|_ka3__K3_|_________|
2310 # | $Ot | $Ou | $Ov | $Ol |
2311 # |_________|_kb2__K2_|_________|_________|
2313 # | $Oq | $Or | $Os | enter |
2314 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2317 # |___________________|_________|_kent_@8_|
2319 vt220+keypad|dec vt220 numeric keypad,
2320 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2321 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2324 vt100+enq|ncurses extension for vt100-style ENQ,
2325 u8=\E[?1;2c, use=ansi+enq,
2326 vt102+enq|ncurses extension for vt102-style ENQ,
2327 u8=\E[?6c, use=ansi+enq,
2329 # And here, for those of you with orphaned VT100s lacking documentation, is
2330 # a description of the soft switches invoked when you do `Set Up'.
2332 # Scroll 0-Jump Shifted 3 0-#
2333 # | 1-Smooth | 1-British pound sign
2334 # | Autorepeat 0-Off | Wrap Around 0-Off
2336 # | | Screen 0-Dark Bkg | | New Line 0-Off
2337 # | | | 1-Light Bkg | | | 1-On
2338 # | | | Cursor 0-Underline | | | Interlace 0-Off
2339 # | | | | 1-Block | | | | 1-On
2341 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2343 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2344 # | | | 1-On | | | 1-50 Hz
2345 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2346 # | | 1-ANSI | | 1-8 Bits
2347 # | Keyclick 0-Off | Parity 0-Off
2349 # Margin Bell 0-Off Parity Sense 0-Odd
2352 # The following SET-UP modes are assumed for normal operation:
2353 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2354 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2355 # Other SET-UP modes may be set for operator convenience or communication
2356 # requirements; I recommend
2357 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2358 # Unless you have a graphics add-on such as Digital Engineering's VT640
2359 # (and even then, whenever it can be arranged!) you should set
2362 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2363 vt100|vt100-am|dec vt100 (w/advanced video),
2364 OTbs, mc5i, xenl, xon,
2366 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2367 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2368 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2369 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2371 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2372 %;m%?%p9%t\016%e\017%;$<2>,
2373 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2374 use=vt100+4bsd, use=vt100+fnkeys,
2375 vt100+4bsd|dec vt100 from 4.0BSD,
2377 cols#80, it#8, lines#24,
2378 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2379 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2380 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2381 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2382 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2383 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2384 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2385 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2386 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2387 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2388 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2389 %;m%?%p9%t\016%e\017%;$<2>,
2390 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2391 smul=\E[4m$<2>, tbc=\E[3g,
2392 vt100nam|vt100-nam|vt100 no automargins,
2394 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2395 vt100-vb|dec vt100 (w/advanced video) & no beep,
2396 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2398 # Ordinary vt100 in 132 column ("wide") mode.
2399 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2401 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2402 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2403 cols#132, lines#14, vt@,
2404 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2406 # vt100 with no advanced video.
2407 vt100-nav|vt100 without advanced video option,
2409 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2411 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2412 cols#132, lines#14, use=vt100-nav,
2414 # vt100 with one of the 24 lines used as a status line.
2415 # We put the status line on the top.
2416 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2419 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2420 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2421 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2422 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2424 # Status line at bottom.
2425 # Clearing the screen will clobber status line.
2426 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2429 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2430 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2432 # Most of the `vt100' emulators out there actually emulate a vt102
2433 # This entry (or vt102-nsgr) is probably the right thing to use for
2436 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2438 vt102-w|dec vt102 in wide mode,
2440 rs3=\E[?3h, use=vt102,
2442 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2443 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2444 # string in the canonical vt100 entry above leaves the screen littered
2445 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2446 # after highlight turnoffs. This entry should fix that, and even leave
2447 # ACS support working, at the cost of making multiple-highlight changes
2448 # slightly more expensive.
2449 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2450 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2451 sgr@, sgr0=\E[m, use=vt102,
2453 # VT125 Graphics CRT. Clear screen also erases graphics
2454 # Some vt125's came configured with vt102 support.
2455 vt125|vt125 graphics terminal,
2457 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2459 # This isn't a DEC entry, it came from University of Wisconsin.
2460 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2463 cols#80, it#8, lines#24, vt#3,
2464 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2465 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2466 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2467 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2468 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2469 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2470 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2471 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2472 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2474 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2475 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2476 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2478 # vt132 - like vt100 but slower and has ins/del line and such.
2479 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2480 # manual and from the ANSI standard, this describes the actual
2481 # terminal. I've never actually used a vt132 myself, so this
2486 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2487 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2489 # This vt220 description maps F5--F9 to the second block of function keys
2490 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2491 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2492 # PF1--PF4 are used as F1--F4.
2495 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2496 OTbs, OTpt, am, mir, msgr, xenl, xon,
2497 cols#80, lines#24, vt#3,
2499 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2500 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2501 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2502 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2503 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2504 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2505 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2506 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2507 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2508 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2509 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2510 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2511 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2512 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2513 rmso=\E[27m, rmul=\E[24m,
2514 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2516 %p9%t\E(0%e\E(B%;$<2>,
2517 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2518 smso=\E[7m, smul=\E[4m,
2520 # A much better description of the VT200/220; used to be vt220-8
2521 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2522 # designation to accommodate bug in pcvt -TD
2524 # Here's a picture of the VT220 editing keypad:
2525 # +--------+--------+--------+
2526 # | Find | Insert | Remove |
2527 # +--------+--------+--------+
2528 # | Select | Prev | Next |
2529 # +--------+--------+--------+
2530 vt220|vt200|dec vt220,
2531 OTbs, am, mir, msgr, xenl, xon,
2532 cols#80, it#8, lines#24, vt#3,
2533 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2534 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2535 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2536 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2537 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2538 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2539 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2540 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2541 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2542 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2543 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2544 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2545 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2546 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2547 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2548 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2549 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2550 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2551 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2552 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2554 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2555 %p9%t\E(0%e\E(B%;$<2>,
2556 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2557 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2559 vt220-w|vt200-w|DEC vt220 in wide mode,
2561 rs3=\E[?3h, use=vt220,
2562 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2563 OTbs, am, mc5i, mir, msgr, xenl, xon,
2564 cols#80, it#8, lines#24, vt#3,
2565 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2566 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2567 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2568 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2569 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2570 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2571 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2572 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2573 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2574 il=\233%p1%dL, il1=\233L, ind=\ED,
2575 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2576 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2577 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2578 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2579 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2580 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2581 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2582 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2583 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2584 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2585 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2586 rmul=\23324m, rs1=\233?3l, sc=\E7,
2587 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2588 %?%p9%t\E(0%e\E(B%;$<2>,
2589 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2590 smso=\2337m, smul=\2334m, tbc=\2333g,
2593 # This vt220 description regards F6--F10 as the second block of function keys
2594 # at the top of the keyboard. This mapping follows the description given
2595 # in the VT220 Programmer Reference Manual and agrees with the labeling
2596 # on some terminals that emulate the vt220. There is no support for an F5.
2597 # See vt220 for an alternate mapping.
2599 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2600 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2601 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2602 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2603 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2605 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2607 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2609 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2610 # (not an official DEC entry!)
2611 # The problem with real vt220 terminals is they don't send escapes when in
2612 # in vt220 mode. This can be gotten around two ways. 1> don't send
2613 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2614 # features of vt100 advanced video which it then has.
2616 # This entry takes the view of putting a vt220 into vt100 mode so
2617 # you can use the escape key in emacs and everything else which needs it.
2619 # You probably don't want to use this on a VMS machine since VMS will think
2620 # it has a vt220 and will get fouled up coming out of emacs
2622 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2623 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2625 vt200-js|vt220-js|dec vt200 series with jump scroll,
2628 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2629 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2630 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2631 ht=^I, il1=\E[L, ind=\ED,
2632 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2634 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2635 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2636 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2637 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2638 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2639 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2641 # This was DEC's vt320. Use the purpose-built one below instead
2642 #vt320|DEC VT320 in vt100 emulation mode,
2645 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2647 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2649 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2651 # These entries are not DEC's official ones, they were purpose-built for the
2652 # VT320. Here are the designer's notes:
2653 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2654 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2655 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2656 # Things that use <knxt> usually use tab anyways... and things that don't use
2657 # tab usually use <knxt> instead...
2658 # kprv is same as tab - Backtab is useless...
2659 # I left out <sgr> because of its RIDICULOUS complexity,
2660 # and the resulting fact that it causes the termcap translation of the entry
2661 # to SMASH the 1k-barrier...
2662 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2663 # (vt320: uncommented <fsl> --esr)
2664 vt320|vt300|dec vt320 7 bit terminal,
2665 am, hs, mir, msgr, xenl,
2666 cols#80, lines#24, wsl#80,
2667 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2668 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2669 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
2670 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2671 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2672 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2673 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2674 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2675 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2676 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2677 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2678 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2679 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2680 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2681 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2682 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2683 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2684 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2685 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2687 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2689 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2690 %p9%t\E(0%e\E(B%;$<2>,
2691 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2692 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2693 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2694 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2696 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2697 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2698 # We have to init 132-col mode, not 80-col mode.
2699 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2701 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2702 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2703 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2705 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2706 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2708 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2709 # which are pretty much a superset of the VT320. They have the
2710 # host writable status line, yet another different DRCS matrix size,
2711 # and such, but they add the DEC Technical character set, Multiple text
2712 # pages, selectable length pages, and the like. The difference between
2713 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2714 # monitor, the former has 4 planes and a color monitor. These terminals
2715 # support VT131 and ANSI block mode, but as with much of these things,
2716 # termcap/terminfo doesn't deal with these features.
2718 # Note that this entry is are set up in what was the standard way for GNU
2719 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2720 # keys were switched into application mode at the same time the numeric pad
2721 # is switched into application mode. This changes the definitions of the
2722 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2723 # your termcap or terminfo entry,
2725 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2726 # (vt340: string capability "sb=\E[M" corrected to "sr";
2727 # also, added <rmam>/<smam> based on the init string -- esr)
2728 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2729 am, eslok, hs, mir, msgr, xenl, xon,
2730 cols#80, it#8, lines#24, vt#3,
2731 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2732 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2733 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2734 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2735 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2736 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2737 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2738 ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2739 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2741 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2743 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2744 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2745 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2746 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2747 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2748 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2749 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2750 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2751 %p9%t\E(0%e\E(B%;$<2>,
2752 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2753 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2754 tsl=\E[2$~\E[1$}\E[1;%dH,
2756 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
2757 vt420+lrmm|VT420 left/right margins,
2758 mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,
2760 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2761 # (originally written with vt420 as its primary name, and usable for it).
2763 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2764 # text pages and long text pages with selectable length of the vt340, along
2765 # with left and right margins, rectangular area text copy, fill, and erase
2766 # operations, selected region character attribute change operations,
2767 # page memory and rectangle checksums, insert/delete column, reception
2768 # macros, and other features too numerous to remember right now. TERMCAP
2769 # can only take advantage of a few of these added features.
2771 # Note that this entry is are set up in what was the standard way for GNU
2772 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2773 # keys were switched into application mode at the same time the numeric pad
2774 # is switched into application mode. This changes the definitions of the
2775 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2776 # your termcap entry,
2778 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2779 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2780 # also, added <rmam>/<smam> based on the init string -- esr)
2781 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2782 am, eslok, hs, mir, msgr, xenl, xon,
2783 cols#80, it#8, lines#24, vt#3,
2784 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2785 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2786 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
2787 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2788 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2789 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2790 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2791 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2792 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2793 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2794 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2795 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2797 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2798 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2799 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2800 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2801 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2802 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2803 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2804 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2805 %p9%t\E(0%e\E(B%;$<2>,
2806 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2807 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2808 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2810 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2811 # a missing <sc> -- esr)
2812 # add msgr and other capabilities from vt220 -TD
2814 am, mir, msgr, xenl, xon,
2815 cols#80, it#8, lines#24, vt#3,
2816 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2817 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2818 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2819 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2820 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2821 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2822 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2823 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2824 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2825 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2826 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2827 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2828 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2829 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2830 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2831 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2832 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2833 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2834 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2835 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2836 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2837 %p9%t\E(0%e\E(B%;$<2>,
2838 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2839 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2840 use=ansi+pp, use=dec+sl, use=ansi+enq,
2842 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2843 # takes two parameters, the key and the string. Translating the key is
2844 # straightforward (keys 1-5 are not defined on real terminals, though some
2845 # emulators define these):
2847 # if (key < 16) then value = key;
2848 # else if (key < 21) then value = key + 1;
2849 # else if (key < 25) then value = key + 2;
2850 # else if (key < 27) then value = key + 3;
2851 # else if (key < 30) then value = key + 4;
2852 # else value = key + 5;
2854 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2855 # There's no provision in terminfo for emitting a string in this format, so the
2856 # application has to know it.
2858 vt420pc|DEC VT420 w/PC keyboard,
2859 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2860 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
2861 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
2862 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
2863 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
2864 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
2865 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
2866 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
2867 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
2868 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
2869 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
2870 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
2871 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2872 pctrm=USR_TERM\:vt420pcdos\:,
2873 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
2874 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
2878 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2880 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
2881 %{127}%=%t\E\177%e%p1%c%;,
2883 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2884 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2886 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2887 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2888 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2889 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2890 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2891 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2892 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2897 vt510pc|DEC VT510 w/PC keyboard,
2899 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2904 # The VT520 is a monochrome text terminal capable of managing up to
2905 # four independent sessions in the terminal. It has multiple ANSI
2906 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2907 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2908 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2910 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2911 # [Alt]/[Print Screen] depending upon which keyboard and which
2912 # terminal mode is being used. If Set-Up has been disabled or
2913 # assigned to an unknown key, Set-Up may be entered by pressing
2914 # [F3] as the first key after power up, regardless of keyboard type.
2916 use=ansi+rca, use=vt420, use=ansi+tabs,
2921 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
2922 # Keyboard, which replaces the old LK41R-AA keyboard.
2924 # In trying to get the function keys to work, I had to cobble my own
2925 # terminfo.src entry, since the existing vt520 entry doesn't include most of
2926 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
2927 # I seem to get them all -Mike Gran
2928 vt520ansi|Boundless VT520 ANSI,
2929 use=ansi+rca, use=vt420f, use=vt220+keypad,
2932 #### VT100 emulations
2934 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2935 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2936 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2937 # that this works best with a stock vt100 entry.
2938 dec-vt100|EWAN telnet's vt100 emulation,
2941 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2942 dec-vt220|DOS tnvt200 terminal emulator,
2945 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2946 # anyone who needs PC VT340 emulation. (or anything below that level, for
2947 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2948 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2949 # I can send the address if requested.
2950 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2951 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2952 z340|zstem vt340 terminal emulator 132col 42line,
2954 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2955 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
2956 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2958 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2959 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
2961 # expect-5.44.1.15/example/tkterm
2962 # a minimal subset of a vt100 (compare with "news-unk).
2964 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
2965 tt|tkterm|Don Libes' tk text widget terminal emulator,
2966 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
2967 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
2968 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2969 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
2976 # nsterm*|Apple_Terminal - AppKit Terminal.app
2978 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
2979 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
2980 # Server and Mac OS X operating systems. There is also a
2981 # "terminal.app" in GNUstep, but I believe it to be an unrelated
2982 # codebase and I have not attempted to describe it here.
2984 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
2985 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
2986 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
2987 # version supports color.
2989 # To determine the version of Terminal.app you're using by running:
2991 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
2993 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
2995 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
2997 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
2999 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3001 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3003 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3004 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3005 # might work too, but really you're on your own here since these
3006 # systems are very obsolete and I can't test them. I do welcome
3007 # patches, though :).
3011 # For GNUstep_Terminal, you're probably best off using "linux" or
3012 # writing your own terminfo.
3014 # For MacTelnet, you're on your own. It's a different codebase, and
3015 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3017 # For iTerm.app, see "iterm".
3020 # The AppKit Terminal.app descriptions all have names beginning with
3021 # "nsterm". Note that the statusline (-s) versions use the window
3022 # titlebar as a phony status line, and may produce warnings during
3023 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3024 # Ignore these warnings, or even ignore these entries entirely. Apps
3025 # which need to position the cursor or do other fancy stuff inside the
3026 # status line won't work with these entries. They're primarily useful
3027 # for programs like Pine which provide simple notifications in the
3028 # status line. Please note that non-ASCII characters don't work right
3029 # in the status line, since Terminal.app incorrectly interprets their
3030 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3031 # versions) or only accepts status lines consisting entirely of
3032 # characters from the first 256 Unicode positions (including C1 but
3035 # The Mythology* of AppKit Terminal.app:
3037 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3038 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3039 # shareware replacement for Terminal called "Stuart" which NeXT bought
3040 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3041 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3042 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3043 # capabilities for the early versions, but I believe that the
3044 # TERM_PROGRAM_VERSION may have been reset at some point.
3046 # The early versions were tailored to the NeXT character set. Sometime
3047 # after the Apple acquisition the encoding was switched to MacRoman
3048 # (initially with serious altcharset bugs due to incomplete conversion
3049 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3050 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3051 # 8-color support (initially buggy when combined with attributes, but
3052 # that was later fixed.) More recently, around Mac OS X version 10.3
3053 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3054 # some versions (for instance 133-1 which shipped with Mac OS X
3055 # version 10.4) this suffered from the <bce> bug, but that seems to
3056 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3058 # In the early days of Mac OS X the terminal was fairly buggy and
3059 # would routinely crash under load. Many of these bugs seem to have
3060 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3061 # some may still remain. This change seems to correspond to
3062 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3063 # it did previously.
3065 # * This may correspond with what actually happened, but I don't
3066 # know. It is based on guesswork, hearsay, private correspondence,
3067 # my faulty memory, and the following online sources and references:
3069 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3070 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3072 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3073 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3075 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3076 # "nsterm" to comply with the name length and case conventions and
3077 # limitations of various software packages [notably Solaris terminfo
3078 # and UNIX.] A single Apple_Terminal alias is retained for
3079 # backwards-compatibility.
3081 # * Added function key support (F1-F4). These only work in Terminal.app
3082 # version 51, hopefully the capabilities won't cause problems for people
3085 # * Added "full color" (-c) entries which support the 16-color mode in
3088 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3089 # support, so "ASCII" (-7) entries without altcharset support were
3092 # nsterm - AppKit Terminal.app
3094 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3095 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3096 # extensions. This terminfo was written to describe versions 41
3097 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3098 # version 10.1) of Terminal.app.
3100 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3101 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3102 # use, the executable for Terminal.app is:
3103 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3105 # If you're looking for a description of the full-screen system
3106 # console which runs under Apple's Darwin operating system on PowerPC
3107 # platforms, see the "xnuppc" entry instead.
3109 # There were no function keys in version 41. In version 51, there are
3110 # four working function keys (F1, F2, F3 and F4.) The function keys
3111 # are included in all of these entries.
3113 # It does not support mouse pointer position reporting. Under some
3114 # circumstances the cursor can be positioned using option-click; this
3115 # works by comparing the cursor position and the selected position,
3116 # and simulating enough cursor-key presses to move the cursor to the
3117 # selected position. This technique fails in all but the simplest
3120 # It provides partial ANSI color support (background colors interacted
3121 # badly with bold in version 41, though, as reflected in :ncv:.) The
3122 # monochrome (-m) entries are useful if you've disabled color support
3123 # or use a monochrome monitor. The full color (-c) entries are useful
3124 # in version 51, which doesn't exhibit the background color bug. They
3125 # also enable an xterm-compatible 16-color mode.
3127 # The configurable titlebar is set using xterm-compatible sequences;
3128 # it is used as a status bar in the statusline (-s) entries. Its width
3129 # depends on font sizes and window sizes, but 50 characters seems to
3130 # be the default for an 80x24 window.
3132 # The MacRoman character encoding is used for some of the alternate
3133 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3134 # disable alternate character set support entirely, and the "VT100"
3135 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3136 # graphics emulation, which seems to think the character encoding is
3137 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3138 # are useful in Terminal.app version 51, which supports UTF-8 and
3139 # other ASCII-compatible character encodings but does not correctly
3140 # implement VT100 graphics; once VT100 graphics are correctly
3141 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3142 # usable in any ASCII-compatible character encoding [except perhaps
3143 # in UTF-8, where some experts argue for disallowing alternate
3144 # characters entirely.]
3146 # Terminal.app reports "vt100" as the terminal type, but exports
3147 # several environment variables which may aid detection in a shell
3148 # profile (i.e. .profile or .login):
3151 # TERM_PROGRAM=Apple_Terminal
3152 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3153 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3155 # For example, the following Bourne shell script would detect the
3156 # correct terminal type:
3158 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3161 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3169 # In a C shell derivative, this would be accomplished by:
3171 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3172 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3173 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3174 # setenv TERM "nsterm-old"
3176 # setenv TERM "nsterm-c-7"
3181 # The '+' entries are building blocks
3182 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3183 am, bw, msgr, xenl, xon,
3184 cols#80, it#8, lines#24,
3185 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3186 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3187 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3188 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3189 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3190 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3191 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3192 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3193 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3194 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3195 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3196 %p5%t;2%;%?%p7%t;8%;m,
3197 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3198 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3200 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3201 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3202 enacs=\E(B\E)0, rmacs=^O,
3203 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3204 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3205 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3207 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3208 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
3209 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3210 \271|\255}\243~\245,
3211 enacs=\E(B\E)0, rmacs=^O,
3212 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3213 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3214 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3216 # compare with xterm+sl-twm
3217 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3218 wsl#50, use=xterm+sl-twm,
3220 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3221 op=\E[0m, use=ibm+16color,
3223 nsterm+c41|AppKit Terminal.app v41 color support,
3224 colors#8, ncv#37, pairs#64,
3225 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3227 # These are different combinations of the building blocks
3229 # ASCII charset (-7)
3230 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3233 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3234 use=nsterm+s, use=nsterm+7,
3236 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3237 use=nsterm+c41, use=nsterm+7,
3239 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3240 use=nsterm+c, use=nsterm+7,
3242 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3243 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3245 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3246 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3248 # VT100 alternate-charset (-acs)
3249 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3252 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3253 use=nsterm+s, use=nsterm+acs,
3255 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3256 use=nsterm+c41, use=nsterm+acs,
3258 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3259 use=nsterm+c, use=nsterm+acs,
3261 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3262 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3264 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3265 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3268 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3271 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3272 use=nsterm+s, use=nsterm+mac,
3274 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3275 use=nsterm+c41, use=nsterm+mac,
3277 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3278 use=nsterm+c, use=nsterm+mac,
3280 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3281 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3283 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3284 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3286 # In Mac OS X version 10.5 the format of the preferences has changed
3287 # and a new, more complex technique is needed, e.g.,
3289 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3290 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3291 # ud.init();prefs=ud.persistentDomainForName_(
3292 # "com.apple.Terminal");prefs["Window Settings"][
3293 # prefs["Default Window Settings"]]["TerminalType"
3294 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3295 # "com.apple.Terminal")' nsterm-16color
3297 # and it is still not settable from the preferences dialog. This is
3298 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3299 # in Apple's bug reporter.
3301 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3302 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3303 # vt52, vt100, vt102 and xterm.
3304 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3306 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
3307 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
3308 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
3309 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3310 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3311 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
3312 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3313 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3314 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
3315 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
3317 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3318 # the background color erase feature. The newer version 240.2 in Mac OS X
3319 # version 10.5 does not.
3321 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3322 # and D P Schreber comparing to nsterm-c-s-acs.
3324 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3325 # can be set in Terminal.app, e.g.,
3327 # defaults write com.apple.Terminal TermCapString nsterm-bce
3329 # and that it is not set in Terminal's preferences dialog.
3331 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3334 # * The terminal description matches the default settings.
3335 # * The keyboard is configurable via a dialog.
3336 # * By default khome, kend, knext and kprev are honored only with a
3338 # * There are bindings for control left/right arrow (but not up/down).
3339 # Added those to nsterm-16color, which is the version used for OS X 10.6
3340 # * "Allow VT100 application keypage mode" is by default disabled.
3341 # There is no way to press keypad-comma unless application mode is enabled
3343 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3344 # * CHT, REP, SU, SD are buggy.
3345 # * ECH works (also in Leopard), but is not used here for compatibility.
3346 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3347 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3348 # nsterm entry from this file to override the MacPorts (20110404) or
3349 # system (20081102) copy of this file.
3350 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3351 # dialog defaults to xterm-256color. Alternative selections are ansi,
3352 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3353 # the menu says "Declare terminal as" without promising to actually emulate
3354 # the corresponding terminals. Indeed, changing TERM does not affect the
3355 # emulation itself. This means that
3356 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3358 # + the color model is the same for each setting of TERM (does not match
3360 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3361 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3362 # + the vt52 emulation does not give a usable shell because screen-clearing
3363 # does not work as expected.
3364 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3365 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3366 # as well as unmasking F10 (which had been used in the window manager). Those
3367 # keys are listed in this entry.
3368 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3369 bce, use=nsterm-16color,
3371 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3372 # TERM_PROGRAM_VERSION=309
3373 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3374 # TERM_PROGRAM_VERSION=303
3375 nsterm-build309|Terminal.app in OS X 10.8,
3376 use=xterm+256setaf, use=nsterm-bce,
3378 # removed bogus kDC7 -TD
3379 nsterm-build326|Terminal.app in OS X 10.9,
3380 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3381 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3382 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3385 nsterm-build343|Terminal.app in OS X 10.10,
3386 kend=\EOF, khome=\EOH, use=nsterm-build326,
3388 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3390 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
3391 # + f1-f4 map to pf1-pf4
3392 # + no vt220 support aside from DECTCEM and ECH
3393 # + there are no protected areas. Forget about anything above vt220.
3394 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3395 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3396 # + but bce fails for 11.6.7.2 (test repeat).
3397 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3398 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3399 # + normal (not X10 or Highlight tracking) mouse now works.
3400 # + mouse any-event works
3401 # + mouse button-event works
3402 # + in alternate screen:
3404 # mode 1047 fails to restore cursor position (do not use)
3405 # mode 1049 fails to restore screen contents (do not use)
3406 # + dtterm window-modify operations work (some messages are not printed)
3407 # + dtterm window-report gives size of window in characters/pixels as
3408 # well as state of window.
3410 # + there is no difference between cnorm/cvvis
3411 # + has dim/invis/blink (no protect of course)
3412 # + most function keys with shift/control modifiers give beep
3413 # (user can configure, but out-of-the-box is what I record)
3414 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3416 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3417 # + kLFT/kRIT work, but not up/down with shift-modifier
3418 # + there are a few predefined bindings with Alt, but no clear pattern.
3419 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3420 # Using ncurses test-program with xterm-new:
3422 # Using xterm's scripts:
3423 # + palette for 256-colors is hardcoded.
3424 # + no support for "dynamic colors"
3425 # + no support for tcap-query.
3426 nsterm-build361|Terminal.app in OS X 10.11,
3428 kmous=\E[M, use=nsterm-build343,
3430 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3431 # Comparing with build361, little has changed, except that italics work.
3432 # Direct-color is not supported, by the way.
3434 # Improved rmso/rmul -TD
3435 nsterm-build400|Terminal.app in OS X 10.13,
3436 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3437 use=ecma+italics, use=nsterm-build361,
3439 # This is an alias which should always point to the "current" version
3440 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3441 use=nsterm-build400,
3447 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3448 # featureful) terminal emulator for Mac OS X. It is similar enough in
3449 # capabilities to nsterm-16color that I have derived this description from that
3450 # one, but as far as I know they share no code. Many of the features are
3451 # user-configurable, but I attempt only to describe the default configuration
3454 # According to its documentation, iTerm uses terminfo to obtain function key
3455 # definitions. For example, if it is started with TERM=xterm, it uses key
3456 # definitons from that terminal description from the local OSX machine. Those
3457 # $TERM settings may be augmented using the bookmark and profile dialogs.
3458 # However, the behavior seen with tack does not agree with either the terminfo
3459 # description or the function keys in its "xterm" profile.
3463 # reports primary DA as VT100 with AVO: \E[?1;2c
3464 # reports secondary DA as "\E[>0;95;c"
3465 # supports blink and underline
3466 # displays bold text as red
3467 # recognizes all dtterm controls for modifying/querying window
3468 # resizing via escape sequence is very slow
3469 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3470 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3471 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3474 # with ncurses test-program:
3475 # ncurses 'k' has problem in second screen; light background does not fill
3476 # with xterm scripts
3477 # can display/alter xterm-256color cube
3478 # can display/alter xterm-88color cube
3479 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3480 am, bce, hs, mir, msgr, npc, xenl, xon,
3481 cols#80, it#8, lines#24, wsl#50,
3482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3483 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3484 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3485 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3486 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3487 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3488 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3489 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3490 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3491 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3492 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3493 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3494 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3495 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3496 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3497 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3498 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3499 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3500 rmso=\E[m, rmul=\E[m,
3501 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3502 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3504 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3505 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3506 tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3507 use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
3508 use=xterm+x11mouse, use=xterm+256setaf,
3512 # https://www.iterm2.com/
3513 # https://github.com/gnachman/iTerm2
3514 # ~/Library/Preferences/com.googlecode.iterm2.plist
3515 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3519 # reports primary DA as VT100 with AVO: \E[?1;2c
3520 # reports secondary DA as "\E[>0;95;0c"
3521 # numeric keypad application mode does not work
3522 # by default, dtterm window-modifications are ignored
3523 # by default, dtterm window-reports return, but icon as "L", window as "l"
3524 # supports SD/SU, no REP, SL, SR
3525 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3526 # no improvement to XFree86 1047/1048 modes
3528 # in meta-mode, imitates xterm, sending UTF-8
3529 # special-key modifiers based on xterm use incompatible default for alt/meta
3530 # with ncurses test-program:
3532 # no improvement to ncurses 'k'
3533 # with xterm scripts:
3536 # Italic text did not work initially, apparently because upgrading did not
3537 # add/change that preference (set in Preferences, Profiles, Text). A new
3538 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3539 # option in the preferences dialog).
3541 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3542 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3543 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3544 blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
3545 kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
3546 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
3547 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
3548 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3549 kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
3550 op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
3551 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3552 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3553 %p5%t;2%;m%?%p9%t\016%e\017%;,
3554 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3555 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3556 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3557 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3558 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3559 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3560 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3561 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3562 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3563 use=xterm+alt+title, use=ecma+italics, use=iterm,
3565 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3567 # On PowerPC platforms, Apple's Darwin operating system uses a
3568 # full-screen system console derived from a NetBSD framebuffer
3569 # console. It is an ANSI-style terminal, and is not really VT-100
3572 # Under Mac OS X, this is the system console driver used while in
3573 # single-user mode [reachable by holding down Command-S during the
3574 # boot process] and when logged in using console mode [reachable by
3575 # typing ">console" at the graphical login prompt.]
3577 # If you're looking for a description of the Terminal.app terminal
3578 # emulator which runs under the Mac OS X Quartz windowing system (and
3579 # other AppKit-supported windowing systems,) see the "nsterm"
3582 # NOTE: Under Mac OS X version 10.1, the default login window does not
3583 # prompt for user name, instead requiring an icon to be selected from
3584 # a list of known users. Since the special ">console" login is not in
3585 # this list, you must make one of two changes in the Login Window
3586 # panel of the Login section of System Prefs to make the special
3587 # ">console" login accessible. The first option is to enable 'Show
3588 # "Other User" in list for network users', which will add a special
3589 # "Other..." icon to the graphical login panel. Selecting "Other..."
3590 # will present the regular graphical login prompt. The second option
3591 # is to change the 'Display Login Window as:' setting to 'Name and
3592 # password entry fields', which replaces the login panel with a
3593 # graphical login prompt.
3595 # There are no function keys, at least not in Darwin 1.3.
3597 # It has no mouse support.
3599 # It has full ANSI color support, and color combines correctly with
3600 # all three supported attributes: bold, inverse-video and underline.
3601 # However, bold colored text is almost unreadable (bolding is
3602 # accomplished using shifting and or-ing, and looks smeared) so bold
3603 # has been excluded from the list of color-compatible attributes
3604 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3605 # monochrome monitor.
3607 # There is one serious bug with this terminal emulation's color
3608 # support: repositioning the cursor onto a cell with non-matching
3609 # colors obliterates that cell's contents, replacing it with a blank
3610 # and displaying a colored cursor in the "current" colors. There is
3611 # no complete workaround at present [other than using the monochrome
3612 # (-m) entries,] but removing the (msgr) capability seemed to help.
3614 # The "standout" chosen was simple reverse-video, although a colorful
3615 # standout might be more aesthetically pleasing. Similarly, the bold
3616 # chosen is the terminal's own smeared bold, although a simple
3617 # color-change might be more readable. The color-bold (-b) entries
3618 # uses magenta colored text for bolding instead. The fancy color (-f
3619 # and -f2) entries use color for bold, standout and underlined text
3620 # (underlined text is still underlined, though.)
3622 # Apparently the terminal emulator does support a VT-100-style
3623 # alternate character set, but all the alternate character set
3624 # positions have been left blank in the font. For this reason, no
3625 # alternate character set capabilities have been included in this
3626 # description. The console driver appears to be ASCII-only, so (enacs)
3627 # has been excluded [although the VT-100 sequence does work.]
3629 # The default Mac OS X and Darwin installation reports "vt100" as the
3630 # terminal type, and exports no helpful environment variables. To fix
3631 # this, change the "console" entry in /etc/ttys from "vt100" to
3632 # "xnuppc-WxH", where W and H are the character dimensions of your
3633 # console (see below.)
3635 # The font used by the terminal emulator is apparently one originally
3636 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3637 # file includes descriptions for the following geometries:
3639 # Pixels Characters Entry Name (append -m for monochrome)
3640 # -------------------------------------------------------------------
3641 # 640x400 80x25 xnuppc-80x25
3642 # 640x480 80x30 xnuppc-80x30
3643 # 720x480 90x30 xnuppc-90x30
3644 # 800x600 100x37 xnuppc-100x37
3645 # 896x600 112x37 xnuppc-112x37
3646 # 1024x640 128x40 xnuppc-128x40
3647 # 1024x768 128x48 xnuppc-128x48
3648 # 1152x768 144x48 xnuppc-144x48
3649 # 1280x1024 160x64 xnuppc-160x64
3650 # 1600x1024 200x64 xnuppc-200x64
3651 # 1600x1200 200x75 xnuppc-200x75
3652 # 2048x1536 256x96 xnuppc-256x96
3654 # The basic "xnuppc" entry includes no size information, and the
3655 # emulator includes no reporting capability, so you'll be at the mercy
3656 # of the TTY device (which reports incorrectly on my hardware.) The
3657 # color-bold entries do not include size information.
3659 # The '+' entries are building blocks
3660 xnuppc+basic|Darwin PowerPC Console basic capabilities,
3663 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3664 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3665 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3666 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3667 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3668 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3669 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3670 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3672 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3673 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3674 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3676 xnuppc+c|Darwin PowerPC Console ANSI color support,
3677 colors#8, ncv#32, pairs#64,
3678 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3680 xnuppc+b|Darwin PowerPC Console color-bold support,
3683 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3686 xnuppc+f|Darwin PowerPC Console fancy color support,
3688 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3690 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3692 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
3695 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3696 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3698 # Building blocks for specific screen sizes
3699 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
3702 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
3705 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
3708 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
3711 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
3714 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
3717 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
3720 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
3723 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
3726 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
3729 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
3732 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
3733 cols#0x100, lines#96,
3735 # These are different combinations of the building blocks
3737 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
3740 xnuppc|darwin|Darwin PowerPC Console (color),
3741 use=xnuppc+c, use=xnuppc+basic,
3743 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
3746 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
3747 use=xnuppc+b, use=xnuppc+c,
3749 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
3752 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
3753 use=xnuppc+f, use=xnuppc+c,
3755 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
3758 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
3759 use=xnuppc+f2, use=xnuppc+c,
3761 # Combinations for specific screen sizes
3762 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
3763 use=xnuppc+80x25, use=xnuppc+basic,
3765 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
3766 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3768 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
3769 use=xnuppc+80x30, use=xnuppc+basic,
3771 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
3772 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3774 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
3775 use=xnuppc+90x30, use=xnuppc+basic,
3777 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
3778 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3780 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
3781 use=xnuppc+100x37, use=xnuppc+basic,
3783 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
3784 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3786 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
3787 use=xnuppc+112x37, use=xnuppc+basic,
3789 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
3790 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3792 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
3793 use=xnuppc+128x40, use=xnuppc+basic,
3795 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
3796 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3798 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
3799 use=xnuppc+128x48, use=xnuppc+basic,
3801 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
3802 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3804 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
3805 use=xnuppc+144x48, use=xnuppc+basic,
3807 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
3808 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3810 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
3811 use=xnuppc+160x64, use=xnuppc+basic,
3813 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
3814 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3816 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
3817 use=xnuppc+200x64, use=xnuppc+basic,
3819 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
3820 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3822 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
3823 use=xnuppc+200x75, use=xnuppc+basic,
3825 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
3826 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
3828 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
3829 use=xnuppc+256x96, use=xnuppc+basic,
3831 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
3832 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
3834 ######## DOS/WINDOWS
3835 # CRT is shareware. It implements some xterm features, including mouse.
3836 crt|crt-vt220|CRT 2.3 emulating VT220,
3839 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3842 # PuTTY 0.55 (released 3 August 2004)
3843 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3845 # Comparing with 0.51, vttest is much better (only a few problems with the
3846 # cursor position reports and wrapping).
3848 # PuTTY 0.51 (released 14 December 2000)
3850 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3851 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3852 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3853 # to xterm, which is incorrect, since several features are misimplemented:
3855 # Alt+key always sends ESC+key, so 'km' capability is removed.
3857 # Control responses, wrapping and tabs are buggy, failing a couple of
3858 # screens in vttest.
3860 # xterm mouse support is not implemented (unrelease version may).
3862 # Several features such as backspace/delete are optional; this entry documents
3863 # the default behavior -TD
3865 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
3866 # but implements it incorrectly as mentioned here:
3867 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
3868 # PuTTY recognized xterm's 1006 mode since late 2015; subsequent release was
3869 # in 2017 (0.70) -TD
3870 putty|PuTTY terminal emulator,
3871 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3872 colors#8, it#8, ncv#22, pairs#64, U8#1,
3873 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3874 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3875 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3876 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3877 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3878 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3879 dch=\E[%p1%dP, dch1=\E[P,
3880 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3881 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3882 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3883 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3884 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3885 %%G\340\202\242\E%%@%e%p1%c%;,
3886 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3887 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3888 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3890 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3891 %02x%p4%{255}%*%{1000}%/%02x,
3892 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3893 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3894 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3895 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3896 kind=\E[B, knp=\E[6~, kpp=\E[5~, kri=\E[A, kspd=^Z, nel=\r\n,
3897 oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3898 rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l,
3899 rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3900 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3901 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3902 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3903 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3904 %;m%?%p9%t\016%e\017%;,
3905 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3906 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3907 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3908 use=ecma+index, use=xterm+sm+1006, use=putty+fnkeys,
3909 use=vt102+enq, use=xterm+sl,
3910 vt100-putty|Reset PuTTY to pure vt100,
3911 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3913 putty-256color|PuTTY 0.58 with xterm 256-colors,
3914 use=xterm+256setaf, use=putty,
3915 putty-noapp|putty with cursor keys in normal mode,
3916 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3917 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3920 # One of the keyboard selections is "VT100+".
3921 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3922 putty-vt100|VT100+ keyboard layout,
3923 use=putty+fnkeys+vt100, use=putty,
3925 putty-sco|putty with SCO function keys,
3926 use=putty+fnkeys+sco, use=putty,
3928 # PuTTY has more than one section in its Keyboard configuration:
3929 # a) backspace/delete, which we ignore since that choice largely depends on
3930 # whether one matches Unix and BSD or Linux.
3931 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3932 # are unrelated to rxvt's actual settings.
3933 # c) function keys and keypad - this is the interesting part. None of the
3934 # selections match any of their respective namesakes, but they are shown
3935 # here to help users who expect that the selections do what is implied.
3937 # This is the default setting for PuTTY
3938 putty+fnkeys|fn-keys for PuTTY,
3939 use=putty+fnkeys+esc,
3941 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3942 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3943 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3944 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3945 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3946 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3948 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3949 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3950 use=putty+fnkeys+esc,
3952 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3953 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3954 use=putty+fnkeys+esc,
3956 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3957 use=putty+fnkeys+esc,
3959 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3961 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3962 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3963 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3964 kf9=\EOX, use=putty+fnkeys+esc,
3966 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3968 # Use modifiers to obtain function keys past 12:
3971 # F25-F36 - control/alt
3972 # F37-F48 - control/shift
3974 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3975 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3976 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3977 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3978 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3979 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3980 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3981 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3982 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3983 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3984 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3985 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3986 kich1=\E[L, knp=\E[G, kpp=\E[I,
3989 # https://github.com/mintty/mintty
3991 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
3992 # 2013 to 38ksloc in 2019. That is still smaller than PuTTY (160ksloc), but
3993 # larger than rxvt (31ksloc).
3995 # Version 3.0 responds to DA as a VT400, however it does not implement the
3996 # application keypad. The assignment of cursor-keys versus modifiers differs
3997 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
3999 # Thomas Wolff suggested these extensions:
4000 # blink2 turn on rapid blinking
4001 # blink0 turn off blinking
4002 # norm turn off bold and half-bright mode
4003 # opaq turn off blank mode
4004 # smul2 begin double underline mode
4005 # smol begin overline mode
4006 # rmol exit overline mode
4007 # Font0 use default font
4008 # Font1 use alternative font 1
4010 # Font10 use alternative font 10
4011 # setal set (under)line color
4012 # ol set default (under)line color
4013 # overs overstrike (print characters over each other)
4015 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4016 mintty|Cygwin Terminal,
4017 setal=\E[5%p1%dm, use=xterm+256color,
4019 mintty-direct|Cygwin Terminal direct-color,
4020 setal=\E[%?%p1%{8}%<%t5%p1%d%e58\:2\:\:%p1%{65536}%/%d\:%p1
4021 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4022 use=xterm+direct, use=mintty+common,
4023 mintty+common|shared capabilities for mintty,
4025 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4026 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4027 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1\:2m,
4028 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4029 Smulx=\E[4\:%p1%dm, blink2=\E[6m, norm=\E[22m,
4030 opaq=\E[28m, smul2=\E[21m, use=ansi+rep,
4031 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4032 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4034 # 2019-06-09: These capabilities are commented-out for compatibility with
4035 # existing releases 5.9-6.1, and may be considered for inclusion after the
4036 # release of ncurses 6.2:
4054 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4055 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4056 # (communication program) which supports:
4058 # - Serial port connections.
4059 # - TCP/IP (telnet) connections.
4060 # - VT100 emulation, and selected VT200/300 emulation.
4061 # - TEK4010 emulation.
4062 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4064 # - Scripts using the "Tera Term Language".
4065 # - Japanese and Russian character sets.
4067 # The program does not come with terminfo or termcap entries. However, the
4068 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
4069 # vt52 or doublesize character support; blinking is done with color). Besides
4070 # the HPA, VPA extensions it also implements CPL and CNL.
4072 # All of the function keys can be remapped. This description shows the default
4073 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4074 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4075 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
4083 # ANSI colors are implemented, but cannot be combined with video attributes
4084 # except for reverse.
4086 # No fonts are supplied with the program, so the acsc string is chosen to
4087 # correspond with the default Microsoft terminal font.
4089 # Tera Term recognizes some xterm sequences, including those for setting and
4090 # retrieving the window title, and for setting the window size (i.e., using
4091 # "resize -s"), though it does not pass SIGWINCH to the application if the
4092 # user resizes the window with the mouse.
4093 teraterm2.3|Tera Term Pro,
4096 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4097 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4098 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4099 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
4100 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4101 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4102 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4103 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
4104 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
4105 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4106 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4107 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4108 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4109 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4110 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
4111 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4112 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
4113 use=klone+color, use=vt100,
4115 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4116 # to choose a Windows OEM font).
4118 # Testing with tack:
4119 # - it does not have xenl (suppress that)
4120 # - underline seems to work with color (modify ncv).
4121 # Testing with vttest:
4122 # - wrapping differs from vt100 (menu 1).
4123 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4125 # - it recognizes the dtterm window controls for reporting size in
4126 # characters and pixels.
4127 # - it passes SIGWINCH.
4128 teraterm4.59|Tera Term Pro,
4131 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4132 kmous=\E[M, use=teraterm2.3,
4136 # Testing with tack:
4137 # - no bell (flash works)
4138 # - bold is yellow, blink is red.
4139 # - default keyboard sends ^? for Delete, can be configured for kdch1
4141 # Testing with vttest:
4142 # + autowrap has problems...
4143 # + color-tests for bce feature match xterm's behavior
4144 # + handles most of xterm's mouse-controls other than highlight-tracking.
4145 # xterm's SGR 1006 works.
4146 # + partial support for DEC locator-events
4147 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4148 # + has a "Tek" window, but does not work with vttest's examples
4149 # + supports the dtterm window modify/report controls
4150 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4152 # + VT220 screen-display tests are ok
4155 # + recognizes xterm's original direct-colors sequences, but result is
4157 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4158 teraterm4.97|Tera Term Pro,
4159 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4160 teraterm-256color|TeraTerm with xterm 256-colors,
4161 use=xterm+256setaf, use=teraterm,
4168 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4169 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4172 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4173 # for casual (occasional) use. Also fails several of the vttest screens,
4174 # but that is not unusual for vt100 "emulators".
4175 # b) Does not implement vt100 keypad
4176 # c) Recognizes a subset of vt52 controls.
4177 ms-vt100|MS telnet imitating dec vt100,
4179 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4180 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4181 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4182 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4183 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4185 # Tested with Windows 2000, the telnet application runs in a console window,
4186 # also using 'Terminal' font.
4189 # a) This version has no function keys or numeric keypad. Unlike the older
4190 # version, the numeric keypad is entirely ignored.
4191 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4192 ms-vt100-color|vtnt|windows 2000 ansi (sic),
4194 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4197 # Based on comments from Federico Bianchi:
4199 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4200 # scheme for PF keys.
4202 # and PuTTY wishlist:
4204 # The modifiers are represented as the codes listed above, prefixed to
4205 # the normal sequences. If the modifier is pressed alone, its sequence
4206 # is transmitted twice in succession. If multiple modifiers apply,
4207 # they're transmitted in the order shift, control, alt.
4212 ms-vt100+|vt100+|windows XP vt100+ (sic),
4213 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4214 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4215 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4216 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4217 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4218 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4219 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4220 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4221 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4222 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4223 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4224 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4225 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4226 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4227 knp=\E/, kpp=\E?, use=ms-vt100-color,
4229 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
4232 # Windows Terminal (Preview)
4234 # Version 0.2.1831.0
4235 # https://github.com/microsoft/terminal
4237 # The task manager shows this as "OpenConsole.exe", which differs
4238 # from the "Windows Command Processor" used for the command-prompt.
4240 # The settings dialog does not work (unless the end user expects to open
4241 # profiles.json in Visual Studio). There is no documentation, of course.
4243 # Testing via an ssh connection, using openssh:
4244 # - the program sets TERM to cygwin if the tab is set to PowerShell,
4245 # and to xterm-256color if "Legacy". However, in the latter, more tests
4246 # fail in vttest, which does not pay attention to TERM.
4248 # - menu 1 (tests for cursor movement) misbehaves like command-prompt
4249 # - primary DA says this is a vanilla VT100
4250 # - does not flush response to primary DA, leaving a ^M on the end when
4251 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
4252 # work properly in this test.
4253 # - in the generic VT100 tests, there are problems with character sets
4254 # (diamond shows as a double-width character, DEL as two replacement-chars).
4255 # - outside of the generic VT100 tests, the program does poorly because most
4256 # of the features are missing.
4257 # - ECH does not work properly
4258 # - a few generic xterm features are supported (set window title), but
4259 # others are missing (such as the mouse).
4260 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
4262 # - blink, dim, bold, invis, protect do not work
4263 # - bce works (but per vttest, with ED, EL, not ECH)
4264 # - does not support keypad application mode
4265 # - implements most of the xterm modified keys; sometimes modifiers are ignored
4266 # or simply incorrect
4267 # - sends escape+key rather than implementing meta mode
4269 # - color palette can be altered, but OSC 104 for resetting does not work
4270 # - crashed with a script used for testing NRCS.
4271 # - does not recognize either xterm+direct or xterm+indirect escapes.
4272 ms-terminal|Windows10 terminal,
4274 rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@, use=xterm+256setaf,
4275 use=xterm+pcfkeys, use=ansi+rep, use=ecma+index,
4279 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
4280 # https://code.visualstudio.com/docs/editor/integrated-terminal
4282 # This sets TERM to xterm-256color, which is a little more successful than
4286 # - menu 1 (cursor movement) has problems with wrapping
4287 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response
4288 # - menu 8 (insert/delete char/line) has problem with delete-character
4289 # - like Windows Terminal, fails the ECH test: neither supports DECALN
4290 # However, the bce test with ECH works.
4291 # - does not support keypad application mode
4292 # - supports most xterm mode controls (except DEC Locator Events)
4293 # - REP, SL/SL do not work, but SD/SU work.
4294 # - the alternate-screen tests fail because it does not support DECALN
4295 # - window modify/report is not supported
4296 # - supports some VT320 presentation reports
4298 # - does not support blinking text
4299 # - implements most of the xterm modified keys, with some exceptions:
4300 # - pageup/pagedown do not send escapes
4301 # - alt cursor left/right send escape-b and escape-f
4302 # - sends UTF-8 like xterm for meta mode
4304 # - mouse mode is not reset by reset-sequence
4305 # - supports italics and dim, but not cross-out or double-underline
4306 # - color-palette cannot be changed
4307 vscode|xterm.js|Visual Studio Code terminal using xterm.js,
4309 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=xterm+256setaf,
4310 use=ecma+index, use=xterm+sm+1006, use=xterm+pcfkeys,
4312 vscode-direct|Visual Studio Code with direct-colors,
4313 use=xterm+indirect, use=vscode,
4315 ######## X TERMINAL EMULATORS
4318 # You can add the following line to your .Xdefaults to change the terminal type
4319 # set by the xterms you start up to my-xterm:
4321 # *termName: my-xterm
4323 # System administrators can change the default entry for xterm instances
4324 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4325 # case, xterm will detect and reject an invalid terminal type, falling back
4326 # to the default of xterm.
4329 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4330 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4331 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4332 # as these seem not to work -- esr)
4333 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4334 OTbs, am, km, mir, msgr, xenl, xon,
4335 cols#80, it#8, lines#65,
4336 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4337 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4338 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4339 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4340 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4341 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4342 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4343 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4344 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4345 smso=\E[7m, smul=\E[4m,
4346 # Compatible with the R5 xterm
4347 # (from the XFree86 3.2 distribution, <blink=@> removed)
4348 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4349 # corrected typos in rs2 string - TD
4351 xterm-r5|xterm R5 version,
4352 OTbs, am, km, msgr, xenl,
4353 cols#80, it#8, lines#24,
4354 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4355 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4356 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4357 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4358 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4359 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4360 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4361 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
4362 kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
4363 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
4364 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4365 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
4366 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4367 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4368 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4370 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4372 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4373 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
4374 # Compatible with the R6 xterm
4375 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4376 # added khome/kend, hts based on the R6 xterm code - TD
4377 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4378 # for compatibility with other emulators).
4379 xterm-r6|xterm X11R6 version,
4380 OTbs, am, km, mir, msgr, xenl,
4381 cols#80, it#8, lines#24,
4382 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4383 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4384 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4385 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4386 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4387 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4388 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4390 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4391 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4392 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4393 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4394 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4395 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4396 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4397 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4398 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4399 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4400 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4401 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4402 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4403 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4404 use=xterm+kbs, use=vt100+enq,
4405 xterm-old|antique xterm version,
4407 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4408 # The name has been changed and some aliases have been removed.
4409 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4410 OTbs, am, bce, km, mir, msgr, xenl, XT,
4411 cols#80, it#8, lines#24, ncv@,
4412 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4413 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4414 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4415 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4416 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4417 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4418 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4419 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4420 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4421 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4423 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4424 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4425 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4426 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4427 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4428 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4429 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4430 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4431 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4432 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4433 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4434 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4436 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4438 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4440 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4441 %;m%?%p9%t\016%e\017%;,
4442 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4443 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4444 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4445 use=ecma+color, use=vt220+keypad,
4447 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4448 # codes for F1-F4 except while in VT220 mode.
4449 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4450 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4452 # This version was released in XFree86 3.3.3 (November 1998).
4453 # Besides providing printer support, it exploits a new feature that allows
4454 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4455 # -- the distribution contained incorrect khome/kend values -TD
4456 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4457 blink=\E[5m, ich1@, invis=\E[8m,
4458 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4459 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4460 rs2=\E[!p\E[?3;4l\E[4l\E>,
4461 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4462 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4463 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4466 # This version was released in XFree86 4.0.
4467 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4469 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4470 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4471 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4472 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4473 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4474 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4475 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4476 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4477 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4478 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4479 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4480 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4481 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4482 kf48=\E[24;6~, khome=\EOH,
4483 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4485 use=xterm+alt1049, use=xterm-xf86-v333,
4487 # This version was released in XFree86 4.3.
4488 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4489 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4490 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4492 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4493 %p7%t;8%;m%?%p9%t\016%e\017%;,
4496 # This version was released in XFree86 4.4.
4497 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4498 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, use=ecma+index,
4501 xterm-xfree86|xterm terminal emulator (XFree86),
4504 # This version reflects the current xterm features.
4505 xterm-new|modern xterm terminal emulator,
4507 kcbt=\E[Z, kent=\EOM, use=ecma+index, use=ansi+rep,
4508 use=ecma+strikeout, use=xterm+keypad, use=vt420+lrmm,
4509 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4512 # This fragment is for people who cannot agree on what the backspace key
4514 xterm+kbs|fragment for backspace key,
4517 # This fragment describes as much of XFree86 xterm's "pc-style" function
4518 # keys as will fit into terminfo's 60 function keys.
4521 # ---------------------------------
4528 # 8 Shift + Alt + Control
4529 # ---------------------------------
4530 # The meta key may also be used as a modifier in this scheme, adding another
4531 # bit to the parameter.
4532 xterm+pcfkeys|fragment for PC-style fkeys,
4533 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4536 xterm+noapp|fragment with cursor keys in normal mode,
4537 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4540 xterm+app|fragment with cursor keys in application mode,
4541 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4544 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4545 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4546 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4548 # The original assignments from patch #94 for cursor-keys had some technical
4551 # A parameter for a function-key to represent a modifier is just more
4552 # bits. But for a cursor-key it may change the behavior of the
4553 # application. For instance, emacs decodes the first parameter of a
4554 # cursor-key as a repeat count.
4556 # A parameterized string should (really) not begin with SS3 (\EO).
4557 # Rather, CSI (\E[) should be used.
4559 # For these reasons, the original assignments were deprecated. For
4560 # compatibility reasons, they are still available as a setting of xterm's
4561 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4562 # that might apply to xterm+pcfkeys with different values of that resource.
4564 # These entries will have warnings when checking with tic because the kri/kind
4565 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
4566 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
4567 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
4569 # * modify xterm-new terminfo entry to use capabilities for shifted
4570 # scroll forward/reverse as shifted cursor up/down.
4572 # In the 1980s when terminfo was defined, the developers made more of
4573 # a distinction between shifted up/down versus shifted left/right since most
4574 # terminals can index (scroll up/down), while few can scroll left/right.
4575 xterm+pcc3|fragment with modifyCursorKeys:3,
4576 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4577 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4578 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4579 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4580 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4581 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4582 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4583 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4586 xterm+pcc2|fragment with modifyCursorKeys:2,
4587 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4588 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4589 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4590 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4591 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4592 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4593 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4595 xterm+pcc1|fragment with modifyCursorKeys:1,
4596 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4597 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4598 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4599 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4600 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4601 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4603 xterm+pcc0|fragment with modifyCursorKeys:0,
4604 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4605 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4606 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4607 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4608 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4609 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4612 # Here are corresponding fragments from xterm patch #216:
4614 xterm+pcf0|fragment with modifyFunctionKeys:0,
4615 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4616 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4617 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4618 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4619 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4620 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4621 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4622 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4623 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4624 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4625 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4626 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4627 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4628 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4629 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4630 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4631 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4633 xterm+pcf2|fragment with modifyFunctionKeys:2,
4634 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4635 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4636 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4637 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4638 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4639 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4640 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4641 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4642 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4643 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4644 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4645 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4646 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4647 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4648 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4649 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4650 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4651 kf8=\E[19~, kf9=\E[20~,
4653 # Chunks from xterm #230:
4654 xterm+pce2|fragment with modifyCursorKeys:2,
4655 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4656 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4657 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4658 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4659 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4660 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4661 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4662 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4663 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4664 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4665 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4668 xterm+edit|fragment for 6-key editing-keypad,
4669 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4672 xterm+pc+edit|fragment for pc-style editing keypad,
4673 kend=\E[4~, khome=\E[1~,
4675 xterm+vt+edit|fragment for vt220-style editing keypad,
4676 kfnd=\E[1~, kslt=\E[4~,
4678 # These variations for alternate-screen and title-stacking were introduced by
4680 xterm+noalt|xterm without altscreen,
4683 xterm+alt1049|xterm 90 feature,
4684 rmcup=\E[?1049l, smcup=\E[?1049h,
4686 xterm+titlestack|xterm 251 feature,
4687 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
4689 xterm+alt+title|xterm 90 and 251 features combined,
4690 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
4692 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
4694 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
4695 # problem that the keypad layout is different, and that the natural choice for
4696 # PF1 is NumLock (which happens to be reserved for other use). To work around
4697 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
4698 # directly related to VT100.
4700 # With the VT220 keypad block that uses the 1-9 keys as suggested in
4701 # terminfo(5), the other keys can be handled with user-defined capabilities:
4703 # _______________________________________
4704 # | NumLock | / | * | - |
4705 # | | $Oo | $Oj | $OS |
4706 # |_________|__kpDIV__|__kpMUL__|__kpSUB__|
4708 # | $Ow | $Ox | $Oy | + |
4709 # |_ka1__K1_|_________|_ka3__K3_| $Ok |
4710 # | 4 | 5 | 6 | kpADD |
4711 # | $Ot | $Ou | $Ov | |
4712 # |_________|_kb2__K2_|_________|_________|
4714 # | $Oq | $Or | $Os | |
4715 # |_kc1__K4_|_________|_kc3__K5_| enter |
4718 # |___________________|_________|_kent_@8_|
4720 xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
4721 kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, kpDOT=\EOn,
4722 kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, use=vt220+keypad,
4724 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4725 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4726 # is shown here (because that is used in mrxvt and mlterm):
4727 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4728 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4729 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4730 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4731 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4732 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4733 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4734 kf63=\E[13;4~, use=xterm+pcf2,
4736 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4737 xterm-basic|modern xterm terminal emulator - common,
4738 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4739 colors#8, cols#80, it#8, lines#24, pairs#64,
4740 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4741 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4742 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4743 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4744 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4745 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4746 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4747 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4748 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4749 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4750 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4751 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4752 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4753 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
4754 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4755 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
4757 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4759 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4761 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4762 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4763 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
4764 smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m,
4765 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics,
4766 use=ansi+pp, use=xterm+kbs, use=xterm+alt+title,
4769 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4770 # In retrospect, something like xterm-r6 was intended here -TD
4771 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4772 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4776 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4779 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4780 # xterm also recognizes the control sequences for initc -TD
4781 xterm-16color|xterm with 16 colors like aixterm,
4783 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4784 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4785 use=xterm+osc104, use=ibm+16color, use=xterm-new,
4787 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4788 # xterm patch #111 (1999/7/10) -TD
4789 xterm+256color|xterm 256-color feature,
4791 colors#0x100, pairs#0x10000,
4792 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4793 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4795 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4797 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4801 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color
4802 # has the drawback that some of the xterm-alikes which use that building block
4803 # require a different approach to rs1 -TD
4804 xterm+osc104|reset color palette,
4805 oc=\E]104\007, rs1=\Ec\E]104\007,
4807 # palette is hardcoded...
4808 xterm+256setaf|xterm 256-color (set-only),
4810 colors#0x100, pairs#0x10000,
4811 initc@, op=\E[39;49m,
4812 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4814 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4818 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4819 # xterm patch #115 (1999/9/18) -TD
4821 # Note that the escape sequences used are the same as for 256-colors - xterm
4822 # has a different table of default color resource values. If built for
4823 # 256-colors, it can still handle an 88-color palette by using the initc
4826 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4827 # which support the xterm+256color feature support the associated initc
4828 # capability. So it is cancelled in the entries which use this and/or the
4829 # xterm+256color block.
4831 # The default color palette for the 256- and 88-colors are different. A
4832 # given executable will have one palette (perhaps compiled-in). If the program
4833 # supports xterm's control sequence, it can be programmed using initc.
4834 xterm+88color|xterm 88-color feature,
4835 colors#88, pairs#7744, use=xterm+256color,
4837 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4838 xterm-256color|xterm with 256 colors,
4839 use=xterm+osc104, use=xterm+256color, use=xterm-new,
4840 xterm-88color|xterm with 88 colors,
4841 use=xterm+osc104, use=xterm+88color,
4844 # Emacs 26.1 and later support direct color mode in terminals, using a
4845 # combination of user-defined capabilities and ncurses-dependent function
4846 # calls. We will not include that here.
4848 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
4849 # is of interest only to the numerically illiterate), is compatible with other
4850 # terminal descriptions written for curses. It relies upon the extended range
4851 # for numeric capabilities provided in ncurses 6.1:
4852 xterm+direct2|xterm with direct-color indexing,
4854 colors#0x1000000, pairs#0x10000,
4855 initc@, op=\E[39;49m,
4856 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
4857 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4858 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
4859 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4861 xterm-direct2|xterm with direct-color indexing (old),
4862 use=xterm+direct2, use=xterm+titlestack, use=xterm,
4864 # That in turn had a problem: in the original patch submitted for KDE konsole
4865 # in 2006, the submitter and the developer alike overlooked a "color space
4866 # identifier" parameter. This version provides for that parameter:
4867 xterm+direct|xterm with direct-color indexing,
4869 colors#0x1000000, pairs#0x10000,
4870 initc@, op=\E[39;49m,
4871 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
4872 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4873 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
4874 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4876 xterm-direct|xterm with direct-color indexing,
4877 use=xterm+direct, use=xterm,
4879 # Here are corresponding flavors for terminals which could use the feature:
4880 iterm2-direct|iTerm2 with direct-color indexing,
4881 use=xterm+direct, use=iterm2,
4882 mlterm-direct|mlterm with direct-color indexing,
4883 use=xterm+direct, use=mlterm,
4885 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
4886 # that xterm's original implementation should have used colons for the
4887 # subparameter separators, but chose not to correct this in konsole. As of
4888 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
4889 xterm+indirect|xterm with direct-color indexing (old),
4891 colors#0x1000000, pairs#0x10000,
4892 initc@, op=\E[39;49m,
4893 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
4894 %/%{255}%&%d;%p1%{255}%&%d%;m,
4895 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
4896 %/%{255}%&%d;%p1%{255}%&%d%;m,
4898 konsole-direct|konsole with direct-color indexing,
4899 use=xterm+indirect, use=konsole,
4900 st-direct|st with direct-color indexing,
4901 use=xterm+indirect, use=st,
4902 vte-direct|vte with direct-color indexing,
4903 use=xterm+indirect, use=vte,
4904 # reportedly in Apple's Mohave (fall 2018), but untested -TD
4905 nsterm-direct|nsterm with direct-color indexing,
4906 use=xterm+indirect, use=nsterm,
4909 # + Apple's Terminal.app does not recognize either form of the direct-color
4911 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
4912 # the colors. Like vte, it is a subset of xterm, although different
4913 # omissions/reservations of modified-keys are seen in testing.
4914 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
4915 # nothing useful with the colors.
4916 # + Teraterm 4.97, like PuTTY (no good).
4917 # + terminology 0.91 recognizes xterm's original implementation, but does
4918 # nothing useful with it.
4922 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4923 # asked for some of xterm's advanced features to be added to its terminfo
4924 # entry. It defines extended capabilities not found in standard terminfo or
4925 # termcap. These are useful in tmux, for instance, hence the name.
4927 # One caveat in adding extended capabilities in ncurses is that if the names
4928 # are longer than two characters, then they will not be visible through the
4929 # termcap interface.
4931 # Ms modifies the selection/clipboard. Its parameters are
4932 # p1 = the storage unit (clipboard, selection or cut buffer)
4933 # p2 = the base64-encoded clipboard content.
4935 # Ss is used to set the cursor style as described by the DECSCUSR
4936 # function to a block or underline.
4937 # Se resets the cursor style to the terminal power-on default.
4939 # Cs and Cr set and reset the cursor colour.
4940 xterm+tmux|advanced xterm features used in tmux,
4941 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4942 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4944 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4945 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4946 # To use it, your decTerminalID resource must be set to 200 or above.
4953 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4954 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4955 colors#8, cols#80, it#8, lines#24, pairs#64,
4956 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4957 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4958 civis=\233?25l, clear=\233H\2332J,
4959 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4960 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4961 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4962 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4963 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4964 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4965 flash=\233?5h$<100/>\233?5l, home=\233H,
4966 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4967 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4968 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4970 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4971 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4972 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4973 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4974 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4975 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4976 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4977 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4978 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4979 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4980 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4981 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4982 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4984 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4986 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4987 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4988 %{6}%=%t3%e%p1%d%;m,
4989 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4990 %{6}%=%t3%e%p1%d%;m,
4991 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4992 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4993 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4994 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4995 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4996 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
4997 vpa=\233%i%p1%dd, use=xterm+kbs,
4999 xterm-hp|xterm with hpterm function keys,
5000 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5001 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
5002 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
5003 knp=\ES, kpp=\ET, use=xterm-basic,
5005 xterm-sco|xterm with SCO function keys,
5006 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5007 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
5008 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
5009 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
5010 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
5011 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
5012 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
5013 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
5014 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
5015 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
5016 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
5017 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
5020 # The xterm-new description has all of the features, but is not completely
5021 # compatible with vt220. If you are using a Sun or PC keyboard, set the
5022 # sunKeyboard resource to true:
5023 # + maps the editing keypad
5024 # + interprets control-function-key as a second array of keys, so a
5025 # 12-fkey keyboard can support vt220's 20-fkeys.
5026 # + maps numeric keypad "+" to ",".
5027 # + uses DEC-style control sequences for the application keypad.
5029 xterm-vt220|xterm emulating vt220,
5030 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5031 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5032 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5033 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
5034 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5035 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
5036 use=xterm+app, use=xterm+edit, use=xterm-basic,
5039 xterm-vt52|xterm emulating dec vt52,
5040 cols#80, it#8, lines#24,
5041 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5042 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
5043 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
5044 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5045 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
5048 xterm-noapp|xterm with cursor keys in normal mode,
5049 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
5052 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
5053 lines#24, use=xterm-old,
5055 # This is xterm for ncurses.
5056 xterm|xterm terminal emulator (X Window System),
5059 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
5060 # setting the vt100Graphics resource to false.
5061 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5064 # These building-blocks allow access to the X titlebar and icon name as a
5065 # status line. There are a few problems in using them in entries:
5067 # a) tsl should have a parameter to denote the column on which to transfer to
5069 # b) the "0" code for xterm updates both icon-title and window title. Some
5070 # window managers such as twm (and possibly window managers descended from
5071 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
5072 # don't want to mess with icon-name when using those window managers.
5074 # The extension "TS" is preferable, because it does not accept a parameter.
5075 # However, if you are using a non-extended terminfo, "TS" is not visible.
5076 xterm+sl|access X title line and icon name,
5078 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
5079 xterm+sl-twm|access X title line (pacify twm-descended window managers),
5081 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
5083 # In contrast, this block can be used for a DEC vt320 and up. There are two
5086 # DECSASD (select active status display)
5087 # \E[0$} Main display
5088 # \E[1$} Status line
5090 # DECSSDT (select status line type)
5091 # \E[0$~ No status line
5092 # \E[1$~ Indicator status line
5093 # \E[2$~ Host-writable status line
5095 # The building block assumes that the terminal always shows something at the
5096 # status line (either the indicator, or status line). That is because if no
5097 # status line is used, then the terminal makes that line part of the user
5098 # window, changing its size without notice.
5100 # Because there is no "esl" (enable status line) capability, the "tsl"
5101 # capability ensures that the status line is host-writable. A DEC terminal
5102 # will clear the status line when changing from indicator to host-writable
5105 # Once on the status line, the row part of cursor addressing is ignored. Since
5106 # tsl expects a parameter (to specify the column), the shortest addressing that
5107 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
5109 dec+sl|DEC VTxx status line,
5111 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
5114 # The following xterm variants don't depend on your base version
5116 # xterm with bold instead of underline
5117 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
5118 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
5120 smso=\E[7m, smul=\E[1m, use=xterm-old,
5122 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
5123 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
5124 ich@, ich1@, use=xterm,
5125 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
5126 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
5127 rmcup@, smcup@, use=xterm,
5130 # The xterm mouse protocol is used by other terminal emulators.
5131 # In this section, two extended capabilities are used to illustrate the mouse
5132 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
5133 # enabling/disabling other mouse protocols. The "xm" capability describes the
5134 # mouse response; currently there is no interpreter which would use this
5135 # information to make the mouse support completely data-driven.
5137 # Here is the "original" xterm mouse protocol.
5139 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
5140 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
5141 # sequence", referring to the fact that it does not correspond to a "real"
5142 # terminal. The mouse responses for the X10 protocol are sent only for
5144 xterm+x10mouse|X10 xterm mouse protocol,
5145 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
5146 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
5147 xterm-x10mouse|X10 xterm mouse,
5148 use=xterm+x10mouse, use=xterm,
5150 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
5153 # The mouse responses for the X11 protocol covered button releases, as well as
5156 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
5159 # The modifiers are not reflected in this description because as used in xterm
5160 # they are normally inaccessible because the translations resources assign
5161 # shift and control to other features. However, they are important because
5162 # they take up space in the first byte of the response. The other bits of this
5163 # byte are used to encode the button number for both presses and releases.
5164 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
5165 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
5166 # provide additional features, e.g., wheel mouse.
5168 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
5169 # "t" or "T", which was activated by double-clicking. The "t" response was
5170 # used when the starting/ending positions were the same.
5172 # X11R3 (February 1988) added the highlight/tracking mode.
5174 # X11R4 (December 1989) added the control sequences document, listing the
5175 # control sequences for the X10/X11 protocols without descriptions. It also
5176 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
5177 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
5179 # X11R5 (November 1993) gave a description of the mouse protocol.
5181 # X11R6 (January 1995) moved the control sequences document out of the xterm
5182 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
5183 # no new information.
5184 xterm+x11mouse|X11 xterm mouse protocol,
5185 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
5186 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
5187 xterm-x11mouse|X11 mouse,
5188 use=xterm+x11mouse, use=xterm,
5190 # Here is a suggested description of the xterm highlighting protocol.
5191 # A more complicated example could be constructed to account for the "t"
5193 xterm+x11hilite|X11 xterm mouse protocol with highlight,
5194 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
5195 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
5197 xterm-x11hilite|X11 mouse with highlight,
5198 use=xterm+x11mouse, use=xterm,
5200 # The preceding were the sources from X Consortium. Other sources (or patches)
5201 # were available. Starting in mid-1995, XFree86 developers collected some of
5202 # those changes and began improvements, e.g., to support color. This was, by
5203 # the way, around the same time that rxvt developers began implementing color,
5204 # though dates (and attributions) are not well documented. I became interested
5205 # in xterm in late 1995, and involved in early 1996. To complete the picture,
5206 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
5208 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
5209 # "any-event" mouse mode.
5210 xterm+sm+1002|xterm any-event mouse,
5211 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
5212 xterm-1002|xterm any-event mouse,
5213 use=xterm+sm+1002, use=xterm,
5215 xterm+sm+1003|testing xterm-mouse,
5216 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
5218 xterm-1003|testing xterm-mouse,
5219 use=xterm+sm+1003, use=xterm,
5221 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5224 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5225 # dropping support for the X11 mouse protocol's shift-modifier and using
5226 # available bits in the first byte of the response to encode buttons 4 and 5.
5227 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5228 # older configurations which might have used the obsolete modifiers.
5230 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5231 # where the coordinates in the mouse response would be encoded in UTF-8,
5232 # thereby extending the range of coordinates past 222=(255-33). This is the
5233 # "1005" mouse mode.
5234 xterm+sm+1005|xterm UTF-8 mouse,
5235 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5236 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5237 xterm-1005|xterm UTF-8 mouse,
5238 use=xterm+sm+1005, use=xterm,
5240 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5241 # SGR-style parameters.
5243 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5244 # (By the way, this is a problem with the X11 protocol). A more plausible
5245 # criticism is that the responses provided by the 1005 mode are not distinct
5246 # from the non-1005 responses.
5248 # As an alternative (and fixing the longstanding limitation of X11 mouse
5249 # protocol regarding button-releases), I provided this:
5250 xterm+sm+1006|xterm SGR-mouse,
5251 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5252 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
5253 xterm-1006|xterm SGR-mouse,
5254 use=xterm+sm+1006, use=xterm,
5257 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5258 # (kterm should not invoke DEC Graphics as the alternate character set
5259 # -- Kenji Rikitake)
5260 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5261 # -- MATSUMOTO Shoji)
5262 # kterm implements acsc via built-in table of X Drawable's
5263 kterm|kterm kanji terminal emulator (X window system),
5266 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5267 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
5268 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5269 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5271 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
5272 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
5273 kterm-color|kterm-co|kterm with ANSI colors,
5274 ncv@, use=kterm, use=ecma+color,
5278 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5279 # variant of xterm which is apparently no longer supported, but are interesting
5280 # because they illustrate SVr4 curses mouse controls - T.Dickey
5281 xtermm|xterm terminal emulator (monocrome),
5282 OTbs, am, km, mir, msgr, xenl,
5283 btns#3, cols#80, it#8, lines#24,
5284 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5285 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5286 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5287 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5288 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5289 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5290 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5291 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5292 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5293 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5294 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5295 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5296 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5297 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5298 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5299 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5300 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5301 %;m%?%p9%t\016%e\017%;,
5302 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5303 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5305 xtermc|xterm terminal emulator (color),
5306 colors#8, ncv#7, pairs#64,
5307 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5308 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5310 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5314 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5315 # Here's a termcap entry I've been using for xterm_color, which comes
5316 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5317 # color stuff, I also have a status line defined as the window manager
5318 # title bar. [I have translated it to terminfo -- ESR]
5319 xterm-pcolor|xterm with color used for highlights and status line,
5321 bold=\E[1;43m, rev=\E[7;34m,
5322 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5323 %t;7;31%;%?%p3%t;7;34%;m,
5324 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5326 # This describes the capabilities of color_xterm, an xterm variant from
5327 # before ECMA-64 color support was folded into the main-line xterm release.
5328 # This entry is straight from color_xterm's maintainer.
5329 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5330 # The README's with the distribution also say that it supports SGR 21, 24, 25
5331 # and 27, but they are not present in the terminfo or termcap.
5332 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5333 OTbs, am, km, mir, msgr, xenl, XT,
5334 cols#80, it#8, lines#65, ncv@,
5335 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5336 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5337 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5338 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5339 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5340 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5341 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5342 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5343 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5344 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5345 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5346 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5347 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5348 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5349 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5350 rmso=\E[27m, rmul=\E[24m,
5351 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5353 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5354 %;m%?%p9%t\016%e\017%;,
5355 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5356 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5357 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5359 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5360 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5361 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5362 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5363 # that each of those implements the home, end, delete keys differently.
5365 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5366 # colors; note that this is not compatible with the 5.2 version.
5367 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5368 # match XFree86's xterm.terminfo usage and prevent circular links
5369 xterm-color|nxterm|generic color xterm,
5371 op=\E[m, use=xterm-r6, use=klone+color,
5373 # This entry describes an xterm with Sun-style function keys enabled
5374 # via the X resource setting "xterm*sunFunctionKeys:true"
5375 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5376 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5377 # because we want it to be seen as <kcpy>.
5378 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5379 # with their Sun keyboard labels instead.
5380 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5381 xterm-sun|xterm with sunFunctionKeys true,
5382 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5383 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5384 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5385 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5386 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5387 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5388 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5389 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5390 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5391 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5392 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5393 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5395 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5396 cols#80, lines#24, use=xterm-sun,
5399 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
5400 gnome-rh62|Gnome terminal,
5402 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5405 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5407 # This implements a subset of vt102 with a random selection of features from
5408 # other terminals such as color and function-keys.
5410 # shift-f1 to shift-f10 are f11 to f20
5412 # NumLock changes the application keypad to approximate vt100 keypad, except
5413 # that there is no escape sequence matching comma (,).
5415 # Other defects observed:
5416 # vt100 LNM mode is not implemented.
5417 # vt100 80/132 column mode is not implemented.
5418 # vt100 DECALN is not implemented.
5419 # vt100 DECSCNM mode is not implemented, so flash does not work.
5420 # vt100 TBC (tab reset) is not implemented.
5421 # xterm alternate screen controls do not restore cursor position properly
5422 # it hangs in tack after running function-keys test.
5423 gnome-rh72|GNOME Terminal,
5425 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
5426 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
5427 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
5429 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
5431 # GNOME Terminal 2.0.1 (Redhat 8.0)
5433 # Documentation now claims it implements vt220 (which is demonstrably false).
5434 # However, it does implement ECH, which is a vt220 feature. And there are
5435 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
5436 # more of its bugs using vttest.
5438 # However, note that bce and msgr are broken in this release. Tabs (tbc and
5439 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
5441 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
5442 # operations. Shift-tab generates a distinct sequence so it can be argued
5443 # that it implements kcbt.
5444 gnome-rh80|GNOME Terminal,
5446 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
5447 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
5449 # GNOME Terminal 2.2.1 (Redhat 9.0)
5451 # bce and msgr are repaired.
5452 gnome-rh90|GNOME Terminal,
5454 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
5455 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
5456 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
5459 # GNOME Terminal 2.14.2 (Fedora Core 5)
5460 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
5461 gnome-fc5|GNOME Terminal,
5463 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
5465 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
5467 # GNOME Terminal 2.18.1 (2007 snapshot)
5469 # For any "recent" version of gnome-terminal, it is futile to attempt to
5470 # support modifiers on cursor- and keypad keys because the program usually
5471 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5472 # of the keys (which more/less correspond to the termcap values), and will
5473 # interpret those according to the $TERM value, but others not in the
5474 # terminfo according to some constantly changing set of hacker guidelines -TD
5475 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5476 use=xterm+pcc2, use=gnome-fc5,
5477 gnome-2007|GNOME Terminal snapshot 2.18.1,
5480 # GNOME Terminal 2.22.3 (2008 snapshot)
5482 # In vttest, it claims to be a vt220 with national replacement character-sets,
5483 # but aside from the identifier string, implements only a small fraction of
5484 # vt220's behavior, which will make it less usable on a VMS system (unclear
5485 # what the intent of the developer is, since the NRC feature exposed in vttest
5486 # by this change does not work).
5487 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5488 use=vte+pcfkeys, use=vte-2007,
5489 gnome-2008|GNOME Terminal snapshot 2.22.3,
5492 # GNOME Terminal 3.6.0 (2012)
5493 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5494 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5497 # Testing with tack shows that flash does not/has not worked -TD
5498 vte-2012|VTE 0.34.1,
5500 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
5501 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5502 %|%t;7%;m%?%p9%t\016%e\017%;,
5503 use=ecma+italics, use=vte-2008,
5504 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5505 # 61 differences from a correct entry for gnome terminal.
5506 gnome-2012|GNOME Terminal 3.6.0,
5509 # Before 2008, GNOME terminal could automatically use the contents of the
5510 # "xterm" terminfo to supply key information which is not built into the
5511 # program. With 2.22.3, this list was built into the program (which addressed
5512 # the inadvertent use of random terminfo data, though using a set of values
5513 # which did not correspond to any that xterm produced - still not solving the
5514 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
5516 # terminfo modifier code keys
5517 # kf13-kf24 shift 2 F1 to F12
5518 # kf25-kf36 control 5 F1 to F12
5519 # kf37-kf48 shift/control 6 F1 to F12
5520 # kf49-kf60 alt 3 F1 to F12
5521 # kf61-kf63 shift-alt 4 F1 to F3
5523 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5524 # no parameters. This appears to be rote copying based on xterm+pcc0.
5525 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5526 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5527 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5528 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5529 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5530 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5531 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5533 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5536 # deprecated - use "vte" for newer versions
5537 gnome|GNOME Terminal,
5539 gnome-256color|GNOME Terminal with xterm 256-colors,
5540 use=xterm+256color, use=gnome,
5542 # relevant changes were made in January 2014, and later.
5544 # Originally VTE was promoted as a library able to emulate any terminal by
5545 # reading its terminal description. In practice, that never got beyond the
5546 # ability to read definitions of special keys (function-, editing-, cursor).
5548 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
5549 # of a termcap file derived from xterm). That was incomplete because it did
5550 # not have any of the modifier-key information used for xterm's function-,
5551 # editing-, and cursor-keys. Having its own reader was unnecessary since
5552 # ncurses provides that information; used since xterm patch #225 in 2007.
5554 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
5555 # gnome #730137) dealt with attempts to recast that termcap reader as library
5556 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
5557 # abandoning that and finally constructing a table to match xterm's default
5558 # behavior, e.g., for "xterm+pcfkeys".
5559 vte-2014|VTE 0.35.1,
5561 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5562 ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
5563 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
5565 # As of January 2018, this was the most recent release,
5566 # e.g., with gnome-terminal 3.26.2
5567 vte-2017|VTE 0.50.2,
5568 use=ecma+strikeout, use=vte-2014,
5570 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
5571 # late in 2017 for changing the appearance of underlines, which was
5572 # incorporated into Debian and Fedora testing-packages in February and March
5573 # 2018, respectively. Overline (Smol/Rmol) has been supported since December
5575 vte-2018|VTE 0.51.2,
5576 Rmol=\E[55m, Smol=\E[53m, Smulx=\E[4\:%p1%dm,
5579 vte|VTE aka GNOME Terminal,
5582 vte-256color|VTE with xterm 256-colors,
5583 use=xterm+256color, use=vte,
5585 # XFCE Terminal 0.2.5.4beta2
5587 # This is based on some of the same source code, e.g., the VTE library, as
5588 # gnome-terminal, but has fewer features, fails more screens in vttest.
5589 # Since most of the terminfo-related behavior is due to the VTE library,
5590 # the terminfo is the same as gnome-terminal.
5596 # https://github.com/thestinger/termite
5598 # A review requires install of Arch Linux since Fedora and Debian don't have
5599 # this program. It uses "vte3-ng" (a conflicting package), which is here:
5600 # https://github.com/thestinger/vte-ng
5601 # which (based on the default branch setting) seems to be a fork of vte
5602 # 0.48.2, and is noted as such in Arch:
5603 # https://www.archlinux.org/packages/community/x86_64/vte3-ng/
5604 # It won't be merged:
5605 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
5606 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
5607 # but perhaps made obsolete.
5609 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
5610 # was mostly cut/paste from xterm-256color, but since VTE does not actually
5611 # implement several of the features in that terminal description, this one is
5612 # trimmed to eliminate those. Also, since it is a slightly older version of
5613 # VTE, it lacks a few more features (again, trimmed).
5614 termite|VTE-based terminal,
5615 am, ccc, km, mir, msgr, npc, xenl,
5616 cols#80, it#8, lines#24, ncv@,
5617 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
5619 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5620 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5621 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5622 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5623 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5624 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5625 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5626 ht=^I, hts=\EH, ind=\n, invis=\E[8m,
5627 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
5628 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
5629 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5630 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
5631 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5633 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
5634 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
5635 use=xterm+alt1049, use=ecma+index, use=ansi+idc,
5636 use=ansi+idl, use=ansi+enq, use=ecma+italics,
5637 use=xterm+256color, use=ecma+color, use=xterm+pcfkeys,
5641 # Multi-Gnome-Terminal 1.6.2
5643 # This does not use VTE, and does have different behavior (compare xfce and
5645 mgt|Multi GNOME Terminal,
5646 use=ecma+index, use=xterm-xf86-v333,
5649 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5650 # or not is debatable).
5653 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5655 # Konsole 1.0.1 (2001/11/25)
5656 # (formerly known as kvt)
5658 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5659 # simplify this entry (and point out why konsole isn't xterm), we base this on
5660 # xterm-r6. The default keyboard appears to be 'linux'.
5663 # a) konsole implements several features from XFree86 xterm, though none of
5664 # that is documented - except of course in its source code - apparently
5665 # because its implementors are unaccustomed to reading documentation - as
5666 # evidenced by the sparse and poorly edited documentation distributed with
5667 # konsole. Some features such as the 1049 private mode are recognized but
5668 # incorrectly implemented as a duplicate of the 47 private mode.
5669 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5670 # sends PC-style escapes rather than vt100.
5671 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5672 # parse some control sequences. Also fails vttest Primary Device Attributes
5673 # by sending a bogus code (in the source it says it's supposed to be a
5674 # vt220, which is doubly incorrect because it does not implement vt220
5675 # control sequences except for a few special cases). Treat it as a
5676 # mildly-broken vt102.
5678 # Update for konsole 1.3.2:
5679 # The 1049 private mode works (but see the other xterm screens in vttest).
5680 # Primary Device Attributes now returns the code for a vt100 with advanced
5681 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5683 # Updated for konsole 1.6.4:
5684 # add konsole-solaris
5686 # Updated for konsole 1.6.6:
5687 # add control-key modifiers for function-keys, etc.
5689 # Updated for konsole 2.3 (October 2008):
5690 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5691 # different from xterm (and vt100's). They have the same behavior in
5692 # this detail, but it is unclear which copies the other.
5694 # Deferred update for konsole 2.10 (late 2012):
5695 # add SGR 1006 mouse
5697 # Updated for konsole 2.12.4 (late 2013):
5700 # Updated for konsole 16.07 (mid 2016):
5701 # add dim, invis, strikeout
5702 # (also overline, which is too rarely used to provide as an extension)
5704 # Updated for konsole 17.12.0 (late 2017):
5705 konsole-base|KDE console window,
5708 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m,
5709 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5710 hpa=\E[%i%p1%dG, invis=\E[8m, kbs=^?, kdch1=\E[3~,
5711 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
5712 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
5713 kf9@, kfnd@, khome=\E[1~, kslt@, rmam=\E[?7l, rmso=\E[27m,
5714 rmul=\E[24m, rs1=\Ec,
5715 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5716 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5717 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5718 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
5719 use=ecma+index, use=xterm+sm+1006, use=ecma+strikeout,
5720 use=ecma+italics, use=ecma+color, use=xterm-r6,
5722 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
5723 # "vt100" key-table files along with a compiled-in default key-table.
5725 # The main difference between the two keytabs was that the developer equated
5726 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
5727 # that. For the same reason, the home/end keys differ. A VT100 had none of
5728 # that. The otherwise identical keytabs have definitions to model the VT52
5729 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
5731 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
5732 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
5733 # dropped from the install in June 2008.
5735 # The default keytab added in January 2000 was originally titled "X11 R6",
5736 # and likewise retitled to "XFree 4".
5738 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
5739 # and changing backspace to ^H, removing that keytab's attempt to model the
5740 # VT100 keypad and VT52 (KDE #20459).
5742 # The developers made changes to the default and linux keytabs. Comparing
5743 # the original and 2018 versions using diffstat:
5744 # default: 119 added, 147 deleted, 28 unchanged
5745 # linux: 47 added, 28 deleted, 104 unchanged
5747 # Most of the change for the default keytab was to make konsole act more like
5748 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
5749 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
5750 # made an external file (like "linux" and "solaris"), and some further
5751 # refinement made. But there are still flaws in the scheme.
5753 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
5754 # Shift into a placeholder in the table entries. That works well if all of the
5755 # modified keys are modified in the same way. But xterm does not do that. The
5756 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
5757 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
5758 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
5759 # kf14: '\E[1;2Q', '\EO2Q'.
5761 # In effect, a quarter of konsole's function-keys are different from xterm.
5763 # It is not a simple blunder:
5764 # a) xterm patch #121 (November 1999), providing the first version of the
5765 # PC-style modifiers would send \EO2Q
5766 # b) xterm patch #216 (July 2006) amended this and other details, provided
5767 # better documentation for the modifiers and made the behavior configurable,
5768 # e.g., using the modifyFunctionKeys resource. The reason why it sends
5769 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
5770 # changelog points this out as "avoid sending SS3 with parameters".
5771 # c) That came after AnyMod was introduced, but still early enough that one
5772 # might expect konsole's developers to followup. Twelve years later that
5773 # has yet to happen.
5775 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
5777 konsole-linux|KDE console window with linux keyboard,
5778 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5779 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5780 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5781 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5782 konsole-solaris|KDE console window with Solaris keyboard,
5783 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5785 # Obsolete: x11r5.keymap
5786 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
5787 # terminfo at the time rather than testing the code.
5788 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5789 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5791 # The value for kbs (see konsole-vt100) reflects local customization rather
5792 # than the settings used for XFree86 xterm.
5793 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5794 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5797 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5798 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
5801 # Obsolete: vt100.keymap
5802 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5803 # it is still useful for deriving the other entries, since the developer
5804 # provided function-keys based on xterm.
5805 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5806 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5807 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5808 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5809 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5810 khome=\E[H, use=konsole-base,
5812 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
5813 # September 2008 and removed in June 2016. The developer who removed it stated
5814 # that it was never installed.
5815 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5816 kbs=^H, kdch1=^?, use=konsole-vt100,
5818 # make a default entry for konsole
5819 konsole|KDE console window,
5822 # These were written for ncurses:
5823 konsole-16color|klone of xterm-16color,
5824 ncv#32, use=ibm+16color, use=konsole,
5825 konsole-256color|KDE console window with xterm 256-colors,
5826 use=xterm+256setaf, use=konsole,
5829 # http://mlterm.sourceforge.net/
5831 mlterm|multi lingual terminal emulator,
5834 # Tested mlterm 3.2.2:
5835 # mlterm 3.x has made changes, but they are not reflected in the included
5836 # mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD
5837 # 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8
5838 mlterm3|multi lingual terminal emulator,
5839 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5840 use=ecma+italics, use=xterm+app, use=xterm+pcf0,
5841 use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse,
5844 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5846 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5849 # The function keys are numbered based on shift/control/alt modifiers, except
5850 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5851 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5852 # how it is configured.
5854 # kf1 to kf12 \E[11~ to \E[24~
5855 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5856 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5857 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5858 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5859 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5860 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5861 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5863 mlterm2|multi lingual terminal emulator,
5864 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5865 colors#8, cols#80, it#8, lines#24, pairs#64,
5866 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5867 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5868 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5869 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5870 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5871 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5872 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5873 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5874 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5875 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5876 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5877 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5878 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5879 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5880 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5881 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
5882 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
5883 rmul=\E[24m, rs1=\Ec,
5884 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5885 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5886 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5888 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
5889 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5890 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5891 vpa=\E[%i%p1%dd, use=xterm+alt1049, use=ecma+index,
5892 use=mlterm+pcfkeys, use=xterm+r6f2,
5894 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5895 # looks in its termcap to decide which string to send. If it used terminfo
5896 # (when available), it could use the extended names introduced for xterm.
5897 mlterm+pcfkeys|fragment for PC-style fkeys,
5898 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5899 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5900 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5901 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5902 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5903 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5904 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5905 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5906 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5908 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5909 use=xterm+256color, use=mlterm,
5912 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5913 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5916 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5917 # but some applications don't work with that.
5918 # It also has an AIX extension
5922 # but the latter does not work correctly.
5924 # The distributed terminfo says it implements hpa and vpa, but they are not
5925 # implemented correctly, using relative rather than absolute positioning.
5927 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5928 # Since rxvt is not really compatible with xterm, it should be configured as
5929 # "rxvt" or "rxvt-color".
5931 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5932 # remove km as per tack test -TD
5933 rxvt-basic|rxvt terminal base (X Window System),
5934 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5935 cols#80, it#8, lines#24,
5936 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5937 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5938 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5939 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5940 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5941 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5942 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5943 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5944 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5945 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5946 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5947 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5948 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5950 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5951 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5953 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5954 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5956 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5957 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5958 use=rxvt+pcfkeys, use=vt220+keypad,
5959 # Key Codes from rxvt reference:
5961 # Note: Shift + F1-F10 generates F11-F20
5963 # For the keypad, use Shift to temporarily override Application-Keypad
5964 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5965 # is off, escape sequences toggle Application-Keypad setting.
5966 # Also note that values of Home, End, Delete may have been compiled
5967 # differently on your system.
5969 # Normal Shift Control Ctrl+Shift
5970 # Tab ^I ESC [ Z ^I ESC [ Z
5971 # BackSpace ^H ^? ^? ^?
5972 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5973 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5974 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5975 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5976 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5977 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5978 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5979 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5980 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5981 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5982 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5983 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5984 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5985 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5986 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5987 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5988 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5989 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5990 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5991 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5992 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5993 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5994 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5995 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5996 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5997 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5998 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5999 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
6000 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
6003 # Up ESC [ A ESC [ a ESC O a ESC O A
6004 # Down ESC [ B ESC [ b ESC O b ESC O B
6005 # Right ESC [ C ESC [ c ESC O c ESC O C
6006 # Left ESC [ D ESC [ d ESC O d ESC O D
6007 # KP_Enter ^M ESC O M
6008 # KP_F1 ESC O P ESC O P
6009 # KP_F2 ESC O Q ESC O Q
6010 # KP_F3 ESC O R ESC O R
6011 # KP_F4 ESC O S ESC O S
6012 # XK_KP_Multiply * ESC O j
6013 # XK_KP_Add + ESC O k
6014 # XK_KP_Separator , ESC O l
6015 # XK_KP_Subtract - ESC O m
6016 # XK_KP_Decimal . ESC O n
6017 # XK_KP_Divide / ESC O o
6029 # The source-code for rxvt actually defines mappings for F21-F35, using
6030 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
6031 # are rare, so this entry uses the shift- and control-modifiers as in
6032 # xterm+pcfkeys to define keys past F12.
6034 # kIC is normally not used, since rxvt performs a paste for that (shifted
6035 # insert), unless private mode 35 is set.
6037 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
6038 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
6039 rxvt+pcfkeys|fragment for PC-style fkeys,
6040 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6041 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
6042 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
6043 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6044 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6045 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6046 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
6047 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
6048 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
6049 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
6050 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
6051 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
6052 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
6053 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6054 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
6055 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
6056 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
6057 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
6058 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
6059 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
6061 # rxvt was originally "xvt", first announced in April 1993:
6062 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
6063 #------------------------------------------------------------------------------
6064 # Article: 567 of comp.os.linux.announce
6065 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
6066 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
6067 # From: nation@rocket.sanders.com (Robert Nation)
6068 # Newsgroups: comp.os.linux.announce
6069 # Subject: xvt upload
6070 # Date: 16 Apr 1993 18:13:07 GMT
6071 # Organization: Cornell Theory Center
6073 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
6074 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
6075 # NNTP-Posting-Host: theory.tc.cornell.edu
6076 # Keywords: xvt, xterm, Xwindows
6077 # Originator: mdw@theory.TC.Cornell.EDU
6079 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
6080 # rxvt.README on sunsite.unc.edu.
6082 # Xvt is an xterm replacement which uses a little less memory, and is
6083 # suitable for use on machines with small memories. Tek4010 support
6086 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
6087 # to make it a little more compact, and to add and remove certain features.
6091 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
6092 #------------------------------------------------------------------------------
6094 # Though its change-log does not mention this, John Davis has stated that he
6095 # was the author of the changes to use the bce ("new color model") which was
6096 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
6097 # dates, nor give developer's names. Initial color support was added for rxvt
6098 # "2.0", which was sometime in 1994.
6100 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
6101 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
6103 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
6104 # was from one of my bug-reports -TD
6106 # While the color model both for xterm and rxvt was based on Linux console,
6107 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
6108 # behavior: inserting/deleting characters does not fill the newly empty cell
6109 # with the default background color.
6110 rxvt|rxvt terminal emulator (X Window System),
6112 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
6113 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
6114 rxvt-color|rxvt terminal emulator (X Window System),
6116 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
6117 use=xterm+256color, use=rxvt,
6118 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
6119 use=xterm+88color, use=rxvt,
6120 rxvt-xpm|rxvt terminal emulator (X Window System),
6122 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
6123 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6124 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6125 \302x\263y\363z\362{\343|\330}\234~\376,
6127 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
6128 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
6129 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
6130 \302x\263y\363z\362{\343|\330~\376,
6133 # This variant is supposed to work with rxvt 2.7.7 when compiled with
6134 # NO_BRIGHTCOLOR defined. rxvt needs more work...
6135 rxvt-16color|rxvt with 16 colors like aixterm,
6136 ncv#32, use=ibm+16color, use=rxvt,
6141 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
6142 # makes its function-keys different from other flavors of rxvt -TD
6144 # Testing with tack:
6145 # + made custom description (below) to work, though it sets TERM=xterm.
6147 # Testing with vttest:
6148 # + While "based on" rxvt, some of the basic functionality is broken. The
6149 # window collapses to a single line when running several of the screens
6150 # in vttest, e.g., the tests for cursor movement, screen features,
6151 # double-sized characters.
6152 # + The vt52 test works properly, but this is an exception. Due to the
6153 # other bug(s) most of vttest is untestable.
6154 # + the color test using ECH shows a gap in the bce model, like rxvt.
6156 # Testing with xterm "vttest" scripts:
6157 # + resize.pl does not work because mrxvt does implement CSI 18 t
6158 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
6159 # + none of the "dynamic colors" (OSC colors) scripts work.
6160 mrxvt|multitabbed rxvt,
6162 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
6163 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
6164 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
6165 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
6166 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
6167 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
6170 mrxvt-256color|multitabbed rxvt with 256 colors,
6171 use=xterm+256color, use=mrxvt,
6174 # From: Michael Jennings <mej@valinux.com>
6178 # removed kf0 which conflicts with kf10 -TD
6179 # remove cvvis which conflicts with cnorm -TD
6180 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
6181 # but does otherwise follow the rxvt+pcfkeys model -TD
6182 # remove nonworking flash -TD
6183 # remove km as per tack test -TD
6184 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
6185 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
6186 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
6187 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6188 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6189 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
6190 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6191 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6192 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6193 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6194 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
6195 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6196 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6197 is1=\E[?47l\E>\E[?1l,
6198 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
6199 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
6200 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
6201 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6202 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
6203 rmso=\E[27m, rmul=\E[24m,
6204 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6205 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6208 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6209 %;m%?%p9%t\016%e\017%;,
6210 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
6211 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6212 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
6215 Eterm-256color|Eterm with xterm 256-colors,
6216 use=xterm+256color, use=Eterm,
6218 Eterm-88color|Eterm with 88 colors,
6219 use=xterm+88color, use=Eterm,
6222 # Based on rxvt 2.4.8, it has a few differences in key bindings
6223 aterm|AfterStep terminal,
6225 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
6229 # This is not based on xterm's source...
6230 # vttest shows several problems with keyboard, cursor-movements.
6231 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6232 xiterm|internationalized terminal emulator for X,
6234 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
6238 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6239 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6240 # chars look like --esr)
6241 hpterm|X-hpterm|hp X11 terminal emulator,
6242 am, da, db, mir, xhp, xon,
6243 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6244 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6245 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6246 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6247 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6248 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6249 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6250 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6251 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6252 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
6253 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6254 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6255 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6256 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6257 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6259 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6260 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6261 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6262 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6264 # HPUX 11 provides a color version.
6265 hpterm-color|HP X11 terminal emulator with color,
6269 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6270 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6273 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6274 # It corresponds to emu's internal emulation:
6276 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6277 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6278 # fixes: add civis, cnorm, sgr -TD
6279 emu|emu native mode,
6280 am, bce, mir, msgr, xon,
6281 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6282 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6283 \224t\225u\226v\227w\230x\231~\244,
6284 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6285 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6286 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6287 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6288 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6289 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6290 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6291 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6292 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6293 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6294 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6295 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6296 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6297 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6298 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
6299 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
6301 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
6303 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
6305 # vt220 Terminfo entry for the Emu emulation, corresponds to
6307 # with NumLock set (to make the keypad transmit kf0-kf9).
6308 # fixes: add am, xenl, corrected sgr0 -TD
6309 emu-220|Emu-220 (vt200-7bit mode),
6311 cols#80, it#8, lines#24, vt#200,
6312 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
6313 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
6314 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
6315 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
6316 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
6317 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
6318 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
6319 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
6320 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
6321 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
6322 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6323 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
6324 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
6325 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
6326 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
6327 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
6328 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
6329 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
6330 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
6331 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6332 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
6333 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
6334 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6335 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
6336 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
6339 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
6340 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
6341 # indicate that it emulates more than one terminal, but incompletely.
6343 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
6344 # It is based on vt102's entry, with some subtle differences, but also
6346 # supports ANSI colors (except for 'op' string)
6347 # apparently implements alternate screen like xterm
6348 # does not use padding, of course.
6349 mvterm|vv100|SwitchTerm aka mvTERM,
6350 am, eslok, hs, km, mir, msgr, xenl, xon,
6351 colors#8, cols#80, it#8, lines#24, pairs#64,
6352 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6353 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6354 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6355 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6356 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6357 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6358 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
6359 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6360 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
6361 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
6362 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
6363 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6364 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
6366 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
6367 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6368 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6369 %;m%?%p9%t\016%e\017%;,
6370 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
6371 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6372 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
6376 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
6378 # "mterm -type ansi" sets $TERM to "ansi"
6379 mterm-ansi|ANSI emulation,
6382 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6383 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6384 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
6385 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6386 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6387 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
6388 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
6389 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
6390 is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O,
6391 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6392 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6393 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6394 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
6395 smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index,
6396 # mterm normally sets $TERM to "mterm"
6397 mterm|mouse-sun|Der Mouse term,
6400 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
6401 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
6402 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
6403 rmir=^O, rmso=^T, smir=^Q, smso=^V,
6404 # "mterm -type decansi" sets $TERM to "decansi"
6406 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
6407 decansi|ANSI emulation with DEC compatibility hacks,
6408 am, mir, msgr, xenl,
6409 colors#8, it#8, pairs#64,
6410 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6411 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6412 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
6413 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
6414 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6415 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6416 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6417 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
6418 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
6419 il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H,
6420 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6421 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6422 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6423 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6424 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
6425 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6426 kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
6427 nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=^O,
6428 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
6429 rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6430 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6431 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6432 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6433 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
6434 u7=\E[6n, vpa=\E[%i%p1%dd, use=ecma+index,
6437 # http://vwm.sourceforge.net/
6439 # VWM 2.0.2 (2009-05-01)
6440 # vwmterm is a terminal emulator written for the VWM console window manager.
6441 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
6443 am, bce, ccc, mir, msgr, npc, xenl, xon,
6445 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6446 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6447 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
6448 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6449 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6450 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
6451 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
6452 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6453 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
6454 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6455 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6456 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
6457 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
6459 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
6460 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6461 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
6462 smul=\E[4m, use=xterm+alt1049,
6466 # MGR is a Bell Labs window system lighter-weight than X.
6467 # These entries describe MGR's xterm-equivalent.
6468 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
6471 mgr|Bellcore MGR (non X) window system terminal emulation,
6473 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
6474 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
6475 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
6476 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
6477 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
6478 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
6479 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6480 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
6481 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
6483 mgr-sun|Mgr window with Sun keyboard,
6484 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
6485 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
6486 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
6487 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
6488 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
6489 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
6490 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
6491 mgr-linux|Mgr window with Linux keyboard,
6492 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
6493 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
6494 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6495 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6496 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
6501 st|stterm| simpleterm,
6505 # dim is intermittent, sometimes works, sometimes does not
6506 # italics may show up with yellow color
6507 # has control cursor-keys, alt cursor-keys, still no combinations
6508 # has control pageup/down
6509 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
6510 # Se and Ss are implemented in the source-code, but the terminfo
6511 # provided with the source is incorrect, since Se/Ss are mis-coded
6512 # as booleans rather than strings.
6513 st-0.7|simpleterm 0.7,
6516 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
6517 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
6518 kcbt@, kent@, oc=\E]104\007,
6519 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6520 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6521 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
6522 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
6523 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
6524 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
6525 use=ecma+strikeout, use=st-0.6,
6529 # This version uses a table which supports a single modifier (a subset of
6530 # xterm's keys, using the same scheme). Because it supports only a single
6531 # modifier in this table, function keys f36-f48 are normally unavailable
6532 # because they are assigned to modifier-4.
6534 # The program assigns TERM to match the program name (the upstream source says
6535 # "st", but Debian renames it to "stterm").
6537 # The source includes two entries which are not useful here:
6538 # st-meta| simpleterm with meta key,
6539 # st-meta-256color| simpleterm with meta key and 256 colors,
6540 # because st's notion of "meta" does not correspond to the terminfo definition.
6541 # Rather, it acts like xterm - when the meta feature is disabled.
6544 # Added eo, removed ul -TD
6547 # implements control-modifier, but not control-shift for special keys
6548 # implements alt-modifier, but not alt-shift for special keys
6551 # http://git.suckless.org/st/log/st.info
6552 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
6553 # still has no function keys past kf36 (no combinations of modifiers)
6554 # no application keypad mode, e.g, kent.
6555 st-0.6|simpleterm 0.6,
6556 am, bce, hs, mir, msgr, npc, xenl, XT,
6557 colors#8, cols#80, it#8, lines#24, pairs#64,
6558 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
6560 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6561 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
6562 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6563 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6564 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6565 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6566 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6567 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
6568 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6569 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
6570 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
6571 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
6572 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
6573 kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
6574 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6575 kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
6576 kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6577 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
6578 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
6579 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
6580 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
6581 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
6582 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
6583 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
6584 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
6585 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
6586 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
6587 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
6588 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
6589 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
6590 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
6591 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
6592 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
6593 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6594 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
6595 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
6596 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6597 rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
6598 rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
6599 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6600 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6602 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6604 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6605 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
6606 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
6607 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
6608 u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
6609 Ss=\E[%p1%d q, use=ecma+index, use=xterm+alt1049,
6610 use=xterm+sl, use=ecma+italics,
6614 # Note: the original terminfo description uses leading blank to persuade
6615 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
6618 # Reading the code shows it should work for aixterm 16-colors
6619 # - added st-16color
6622 # - set eo (erase-overstrike)
6624 # - tbc doesn't work
6626 # - cbt doesn't work
6627 # - shifted cursor-keys send sequences like rxvt
6628 # - sgr referred to unimplemented "invis" mode.
6629 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
6630 simpleterm|old-st| simpleterm 0.1.1,
6631 am, eo, mir, msgr, ul, xenl,
6632 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6633 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6634 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6635 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6636 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6637 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6638 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6639 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6640 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?, kcub1=\E[D,
6641 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6642 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6643 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
6644 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6645 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
6646 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
6647 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6648 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6650 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
6652 st-16color|stterm-16color|simpleterm with 16-colors,
6653 use=ibm+16color, use=st,
6654 # 256 colors "works", but when running xterm's test-scripts, some garbage is
6655 # shown in the titlebar.
6657 # terminal wants to use TERM=stterm-256color, but that is longer than 14
6658 # characters, making the choice nonportable.
6659 st-256color|stterm-256color|simpleterm with 256 colors,
6661 initc@, oc@, use=xterm+256color, use=st,
6664 # https://github.com/software-jessies-org/jessies/wiki/Terminator
6666 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
6667 # Debian/current -TD (2011/8/20)
6669 # There were some packaging problems:
6670 # a) using Java, the program starts off using 50Mb, and climbs from there,
6671 # up to 114Mb after testing (no scrollback).
6672 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
6673 # (two copies, just in case the host happens to be Mac OS X).
6674 # I deleted this after testing with tack.
6676 # Issues/features found with tack:
6677 # a) tbc does not work (implying that hts also is broken).
6678 # Comparing with the tabs utility shows a problem with the last tabstop on
6680 # b) has xterm-style shifted function-key strings
6681 # meta also is used, but control is ignored.
6682 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6684 # d) some combinations of shift/control send xterm-style sequences for
6685 # insert/delete/home/end.
6686 # e) numeric keypad sends only numbers (compare with vttest).
6687 # f) meta mode (km) is not implemented.
6689 # Issues found with ncurses test-program:
6690 # a) bce is inconsistently implemented
6691 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6693 # Checked with vttest, found low degree of compatibility there.
6695 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6699 # b) corrected sgr0 to reset alternate character set
6700 # c) modified smacs/rmacs to use SCS rather than SI/SO
6704 # Revisiting in May 2019, the Debian package was no longer available, and a
6705 # developer-provided ".deb" does not work. However, a usable Windows ".msi"
6706 # (which relies upon Cygwin) can be tested. The developers provide a terminfo,
6707 # but some of the features it lists do not work reliably (bce, italics, invis).
6711 # invis attribute fails
6712 # key-definitions could be expanded, with some work:
6713 # + supports xterm-style cursor key-modifiers for shift
6714 # + supports xterm-style function key-modifiers for shift,control,alt
6715 # + supports xterm-style editing key-modifiers for shift,control,alt
6717 # ncurses test-program:
6718 # "C" menu shows that bce implementation is incomplete
6719 # italics did not work
6720 # dim worked once in tack, but not in ncurses test-program
6721 # "F" thick-line characters do not display
6723 # terminal does not respond to 80/132-column switching
6724 # wrapping at the right margin is erratic
6725 # there are several problems in the cursor-movements and screen-features
6726 # no vt52, no double-sized characters
6727 # Device attributes response says it is a vanilla VT100
6728 # does not respond to xterm mouse controls
6729 # alternate screen tests do not fill the screen, return wrong position
6730 # window modify/report operations do not work
6731 # miscellaneous ISO-6429 tests, e.g., REP, do not work
6732 # CBT, CHT, HPR, CNL,CPL, VPR do not work
6734 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
6735 # use xterm+256setaf, etc -TD
6736 terminator|Terminator no line wrap,
6737 bce, eo, mir, msgr, xenl, xon,
6738 cols#80, it#8, lines#24, lm#0,
6739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6740 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6741 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6742 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6743 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6744 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6745 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6746 el1=\E[1K, enacs=\E(B\E)0, flash=^G, home=\E[H,
6747 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
6748 ind=\n, is1=\E[?47l\E=\E[?1l,
6749 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
6750 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6751 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6752 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6753 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6754 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6755 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
6756 rev=\E[7m, ri=\EM, rmacs=\E(B, rmir=\E[4l, rmso=\E[27m,
6757 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
6758 s0ds=\E(B, s1ds=\E(0, sc=\E7,
6759 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
6760 %;m%?%p9%t\E(0%e\E(B%;,
6761 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
6762 smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, vpa=\E[%i%p1%dd,
6763 use=ecma+italics, use=ecma+index, use=xterm+256setaf,
6764 use=xterm+sl-twm, use=xterm+alt1049,
6767 # https://www.enlightenment.org/about-terminology
6769 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6770 # emulator, nor is it compatible with xterm, but it uses a few features from
6774 # cursor does not fill on focus
6775 # there are pervasive problems with clearing/erasing parts of the screen
6776 # resizing the window causes it to stop listening to the keyboard
6778 # doesn't understand vt100 CPR needed for resize
6783 # uses bce model for colors, but (see below) fails the vttest screens
6784 # has partial support for 256color feature.
6785 # tack function-keys (a subset of xterm+pcf0), and
6786 # tack cursor-keys (a subset of xterm+pce2):
6787 # ctrl+shift (ignored)
6789 # shift-alt modifier -> shift (2)
6793 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6794 # ctrl + khome/kend works - none of the other modifiers do
6796 # spits lots of messages from termptyesc.c especially in vttest.
6797 # no 132-column mode
6798 # fails menu 1, 2 (definitely not vt100-compatible)
6799 # primary (claims vt420 with several options, apparently none work) and
6800 # secondary report says (perhaps... vt420): \E[>41;285;0c
6801 # CHA, HPR, VPA, CNL, CPL work
6802 # BCE with ED/EL - fail
6803 # BCE with ECH/indexing - fail
6805 # unlike teken, background light/dark works
6807 # X10 and Normal mouse work
6808 # Any-event mouse works
6809 # Mouse button-event works
6811 # This description uses xterm+pcf0, which is misleading because the program
6812 # does not handle combinations of modifiers - but listing them all would
6813 # involve more effort than its developers spent -TD
6814 terminology-0.6.1|EFL-based terminal emulator,
6816 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6817 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6818 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6819 kind=\E[1;2B, kri=\E[1;2A,
6820 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6821 %;m%?%p9%t\016%e\017%;$<2>,
6822 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6823 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6824 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6825 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6826 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6827 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6828 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6829 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6832 # Tested terminology 1.0.0
6835 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
6836 # and control+alt were added like xterm+pcc2
6837 # Editing keys have some features from xterm+pce2
6838 # Changed from xterm+pcf0 to xterm+pcf2
6843 # Aside from the partial fixes for function/cursor/editing keys, no improvement
6844 # in other tests versus 0.6.1
6845 terminology-1.0.0|EFL-based terminal emulator,
6846 civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m,
6847 flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH,
6849 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
6850 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
6851 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
6852 use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2,
6853 use=xterm+pcc2, use=terminology-0.6.1,
6855 terminology|EFL-based terminal emulator,
6856 use=terminology-1.0.0,
6858 ######## OPENGL CLIENTS
6861 # https://github.com/jwilm/alacritty
6862 # Version 0.3.3 (2019/08/03)
6863 # Version 0.2.1 (2018/10/03)
6864 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
6865 # terminal programs) is not designed to run with a remote server.
6867 # Packaged in Arch Linux -
6869 # initial screensize 24x80
6870 # no DECCOLM (does not switch between 80/132 columns)
6871 # otherwise, passes wrapping test
6873 # identifies as a vt102
6876 # ECH works (0.2.1 left text on right margin)
6880 # does not implement any of the DECRQM/DECRPM controls
6881 # does not implement any of the DECRQSS controls
6886 # fails CHT, otherwise ECMA-48 cursor movement ok
6887 # fails ERM/SPA, SL, SR, passes REP, SD, SU
6890 # has normal and highlight mouse
6891 # has any-event and button-event mouse
6892 # cursor-position wrong after alternate-screen
6893 # none of the dtterm controls work
6895 # bell and flash do not work
6896 # italics and crossed-out work (latter did not work in 0.2.1)
6897 # function-keys work up to kf36; those using two modifiers do not work
6899 # The program sources include "alacritty" and "alacritty-direct", which are
6900 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
6901 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
6902 alacritty|alacritty terminal emulator,
6903 rs1=\Ec\E]104\007, use=xterm+256color,
6904 use=alacritty+common,
6906 alacritty-direct|alacritty with direct color indexing,
6907 use=xterm+indirect, use=alacritty+common,
6909 # removed ech, since it fails vttest -TD
6910 # added ecma+strikeout in 0.3.3 -TD
6911 # added xterm+sl-twm in 0.3.3 -TD
6912 alacritty+common|base fragment for alacritty,
6914 ech@, kb2=\EOE, kbs=^?, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
6915 use=ecma+index, use=xterm-basic, use=xterm+app,
6916 use=ansi+rep, use=xterm+sm+1006, use=xterm+tmux,
6917 use=ecma+strikeout, use=xterm+sl-twm, use=ecma+italics,
6918 use=xterm+pce2, use=xterm+pcc2, use=xterm+pcf2,
6921 # https://github.com/kovidgoyal/kitty
6923 # Project started in 2016/10 (see alacritty), but is a Python script rather
6924 # than Rust, using OpenGL. The same caveats regarding remote connections
6925 # apply. This is not an X terminal, though (like alacritty), it copies
6926 # features from xterm.
6928 # Regarding the name "kitty", that is a pun, reflected in the description.
6930 # http://www.9bis.net/kitty/
6931 # https://github.com/kovidgoyal/kitty/issues/9
6932 # https://github.com/kovidgoyal/kitty/issues/1025
6934 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
6935 # https://github.com/kovidgoyal/kitty/issues/879
6938 # initial screensize 71x22
6939 # does not respond to "resize -s"
6940 # resizing with window manager gives no clues
6942 # does not switch between 80/132 columns
6943 # fails wrapping test, copying vte/rxvt
6944 # no reverse-background, no blink
6945 # claims to be vt200:
6947 # secondary \E[>1;4000;12c
6949 # no GR in the locking-shifts screen
6950 # no NRCS or ISO-2022, anyway
6953 # has DECTCEM, ECH, but no SRM and DECSCA
6954 # has operating condition report, none of the others
6957 # DECRQSS ok for DECSTBM, SGR, none of the others
6960 # DECXCPR device status works, none of the others
6961 # no left/right margins
6962 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
6963 # inside of DECCARA is uncolored
6964 # line-drawing with DECCARA does not work
6965 # aside from left/right margins, editing sequences look ok
6968 # fails ECH test for bce
6970 # fails REP, SL, SL, but other cursor-movement ok
6972 # does not recognize original alternate-screen
6973 # cursor-position wrong after alternate-screen
6974 # has normal mouse, any-event, any-button, but
6976 # no mouse-highlight tracking
6978 # dtterm - only supports report-size chars/pixels
6979 # recognizes tcap-query
6981 # flash doesn't work
6982 # italics do not work
6983 # bce should be set (but see vttest)
6984 #* developer's terminfo stopped at kf25, but the program continues,
6985 # copying xterm for the rest of the control+fkey sequence
6986 # (but only one modifier is supported, like iTerm2).
6987 #* it omitted shifted pageup/down
6988 #* control+editing keys work
6989 # In contrast to function-keys, some additional modifier combinations
6990 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
6991 # the implementation is incomplete, the building-blocks are consistent
6992 # with what has been implemented -TD
6993 # DECKPAM does not work -TD
6994 #* ka1, ka3, kc1, kc3 were bogus (removed)
6995 #* meta sends escape (removed kmm) -TD
6996 #* cvvis does not make cursor "more visible" -TD
6998 use=xterm+256color, use=kitty+common,
6999 kitty-direct|KovId's TTY using direct colors,
7000 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
7001 kitty+common|KovId's TTY common properties,
7002 am, mc5i, mir, msgr, npc, xenl,
7003 cols#80, it#8, lines#24,
7004 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7006 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7007 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
7008 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7009 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7010 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7011 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7012 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7013 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7014 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7015 ind=\n, kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB,
7016 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kf1=\EOP,
7017 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P,
7018 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
7019 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
7020 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
7021 kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R,
7022 kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~,
7023 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
7024 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf4=\EOS,
7025 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7026 khome=\EOH, kich1=\E[2~, kind=\E[1;2B, kmous=\E[M,
7027 knp=\E[6~, kpp=\E[5~, kri=\E[1;2A, op=\E[39;49m, rc=\E8,
7028 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
7029 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
7030 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
7032 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7033 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7034 vpa=\E[%i%p1%dd, use=ecma+index, use=xterm+sl-twm,
7035 use=ecma+strikeout, use=xterm+pce2, use=xterm+pcc2,
7036 use=ecma+italics, use=xterm+alt1049,
7038 ######## WEB CLIENTS
7041 # https://domterm.org
7043 # Quoting its webpage:
7044 # The domterm command runs a server that manages sessions (usually shell
7045 # processes). The user interface and terminal emulation is handled by a
7046 # JavaScript library that can run in a regular web browser or an embedded
7047 # browser such as Electron, using Web Sockets to talk to the server.
7049 # it can connect to, and display in, a web browser, or as a standalone Qt
7050 # application. Either way, it displays in the current desktop session.
7052 # Testing current code (2019/07/06) with Fedora 30:
7061 # bce screen shows diagonal lines...
7063 # kf11 toggles maximize
7064 # cursor-key application mode works
7065 # numeric keypad application does not work; keys always send face-codes
7066 # sends utf-8 for meta, like xterm
7068 # has problems with menu #1 (wrapping)
7069 # DA = vt200 with 132 columns, color
7070 # DA2 = 990, 100300 ("\E[>990;100300;0c")
7071 # no VT52, no double-size characters
7072 # vt220 ECH test works, SRM, DECSCA do not
7073 # S7C1T/S8C1t does not work
7074 # DECUDK does not work
7075 # CNL does not work; the other ECMA-48 cursor-movement tests work
7076 # REP sort-of works (does not match xterm)
7077 # SD/SU work, but not SL/SR
7078 # window reporting: works for size in chars/pixels, but not other tests
7079 # X10 mouse clicks work -- but return 4 rather than 1 for codes
7080 # any-event mouse mode acts like any-button mode
7081 # implements SGR mouse-mode
7083 # does not implement initc
7084 # does accept either colons or semicolon in 38/48 SGR.
7085 domterm|DomTerm web client,
7087 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
7088 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7090 sitm@, smkx=\E[?1h, use=xterm+256setaf, use=ecma+index,
7091 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm-basic,
7094 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
7097 # Columbus UNIX virtual terminal. This terminal also appears in
7098 # UNIX 4.0 and successors as line discipline 1 (?), but is
7099 # undocumented and does not really work quite right.
7100 cbunix|cb unix virtual terminal,
7102 cols#80, lines#24, lm#0,
7103 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7104 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
7105 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
7106 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
7107 smso=\Ea^D, smul=\Ea^A,
7108 # (vremote: removed obsolete ":nl@:" -- esr)
7109 vremote|virtual remote terminal,
7111 cols#79, use=cbunix,
7113 pty|4bsd pseudo teletype,
7114 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
7115 smso=\Ea$, smul=\Ea!, use=cbunix,
7119 # https://www.emacswiki.org/emacs/AnsiTerm
7120 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
7122 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
7123 eterm|gnu emacs term.el terminal emulation,
7126 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7127 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7128 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7129 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7130 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7131 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7132 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
7133 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7134 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
7137 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
7138 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
7139 am, mir, msgr, xenl,
7140 colors#8, cols#80, lines#24, pairs#64,
7141 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
7142 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7143 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7144 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7145 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7146 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7147 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
7148 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7149 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
7150 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
7151 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
7152 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
7153 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
7155 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
7156 u6=\E[%i%d;%dR, u7=\E[6n,
7158 # shell.el can "do" color, though not nearly as well.
7161 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
7164 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
7165 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
7166 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
7168 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
7169 # frequently. The contemporaneous term.el aka ansi-term does not "support"
7170 # italics but does not lose the color information -TD 2017/01/28.
7171 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
7173 colors#8, it#8, ncv#13, pairs#64,
7174 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
7175 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7176 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
7180 # Entries for use by the `screen' program by Juergen Weigert,
7181 # Michael Schroeder, Oliver Laumann. The screen and
7182 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
7183 # come from University of Wisconsin and may be older.
7184 # (screen: added <cnorm> on ANSI model -- esr)
7186 # 'screen' defines extensions to termcap. Some are used in its terminal
7188 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
7189 # AX (bool) Does understand ANSI set default fg/bg color
7190 # (\E[39m / \E[49m).
7191 # S0 (str) Switch charset 'G0' to the specified charset.
7192 # E0 (str) Switch charset 'G0' back to standard charset.
7194 # Initially tested with screen 3.09.08
7196 # According to its manual page
7198 # Screen is a full-screen window manager that multiplexes a physical
7199 # terminal between several processes (typically interactive shells). Each
7200 # virtual terminal provides the functions of a DEC VT100 terminal and, in
7201 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
7202 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
7203 # multiple character sets).
7205 # However, there is a design error in its support for video highlights. The
7206 # program uses a table (rendlist) which equates the SGR codes to terminal
7207 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
7208 # is modified only by the presence or absence of the corresponding capabilities.
7209 # Not by their values.
7211 # If screen sets the TERMCAP variable, it uses hardcoded strings which
7212 # correspond to the rendlist table.
7214 # The table gives this information:
7226 # 22 reset bold, standout and dim
7228 # 24 reset underline
7233 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
7234 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
7235 # Without some redesign of screen, it is not possible to extend the set of
7236 # capabilities. Substitution would be possible, e.g., sending italics in
7237 # place of underline.
7239 # Because screen uses hard-coded parsing, it does not check if two capabilities
7240 # use the same value. For example, changing standout to be the same as any of
7241 # the other capabilities will confuse screen. Curses applications which use
7242 # sgr are not impacted (because that usually resets all capabilities before
7243 # setting any), but termcap applications do not use sgr -TD
7245 # The "screen" entry should use ecma+index rather than just indn, but tmux
7246 # defaults to using "screen". For background, screen supported ecma+index
7247 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
7248 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
7249 # terminfo entries (which list about 60% of the control sequences).
7250 screen|VT 100/ANSI X3.64 virtual terminal,
7251 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
7252 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
7253 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
7255 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7256 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
7257 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7258 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7259 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
7260 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7261 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7262 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
7263 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7264 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
7265 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7266 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
7267 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7268 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7269 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
7270 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
7271 rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
7272 rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
7273 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
7274 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
7275 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
7276 smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7277 E0=\E(B, S0=\E(%p1%c, use=xterm+alt1049, use=ecma+color,
7278 # The bce and status-line entries are from screen 3.9.13 (and require some
7279 # changes to .screenrc).
7280 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
7283 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
7284 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen4,
7286 # ======================================================================
7287 # Entries for GNU Screen with 16 colors.
7288 # Those variations permit to benefit from 16 colors palette, and from
7289 # bold font and blink attribute separated from bright colors. But they
7290 # are less portable than the generic "screen" 8 color entries: Their
7291 # usage makes real sense only if the terminals you attach and reattach
7292 # do all support 16 color palette.
7294 screen-16color|GNU Screen with 16 colors,
7295 use=ibm+16color, use=screen4,
7297 screen-16color-s|GNU Screen with 16 colors and status line,
7298 use=ibm+16color, use=screen-s,
7300 screen-16color-bce|GNU Screen with 16 colors and BCE,
7301 use=ibm+16color, use=screen-bce,
7303 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
7304 bce, use=ibm+16color, use=screen-s,
7306 # ======================================================================
7307 # Entries for GNU Screen 4.02 with --enable-colors256.
7309 screen-256color|GNU Screen with 256 colors,
7310 use=xterm+256setaf, use=screen4,
7312 screen-256color-s|GNU Screen with 256 colors and status line,
7313 use=xterm+256setaf, use=screen-s,
7315 screen-256color-bce|GNU Screen with 256 colors and BCE,
7316 bce, use=xterm+256setaf, use=screen-bce,
7318 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
7319 bce, use=xterm+256setaf, use=screen-s,
7321 screen.xterm-256color|GNU Screen with xterm using 256 colors,
7322 use=xterm+256setaf, use=screen.xterm-new,
7324 screen.konsole-256color|GNU Screen with konsole using 256 colors,
7325 use=xterm+256setaf, use=screen.konsole,
7327 screen.vte-256color|GNU Screen with vte using 256 colors,
7328 use=xterm+256setaf, use=screen.vte,
7330 screen.putty-256color|GNU Screen with putty using 256 colors,
7331 use=xterm+256setaf, use=screen.putty,
7333 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
7334 use=xterm+256setaf, use=screen.mlterm,
7336 # ======================================================================
7338 # Read the fine manpage:
7339 # When screen tries to figure out a terminal name for
7340 # itself, it first looks for an entry named "screen.<term>",
7341 # where <term> is the contents of your $TERM variable. If
7342 # no such entry exists, screen tries "screen" (or "screen-w"
7343 # if the terminal is wide (132 cols or more)). If even this
7344 # entry cannot be found, "vt100" is used as a substitute.
7346 # Notwithstanding the manpage, screen uses its own notion of the termcap
7347 # and some keys from "screen.<term>" are ignored. Here is an entry which
7348 # covers those (tested with screen 4.00.02) -TD
7349 screen+fkeys|function-keys according to screen,
7350 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
7353 # See explanation before "screen" entry. Cancel italics so that applications
7354 # do not assume screen supports the feature. Add this tweak to entries which
7355 # extend screen for terminals which do support italics.
7356 screen+italics|screen cannot support italics,
7359 # Here are a few customized entries which are useful -TD
7362 # (a) screen does not support invis.
7363 # (b) screen's implementation of bw is incorrect according to tack.
7364 # (c) screen appears to hardcode the strings for khome/kend, making it
7365 # necessary to override the "use=" clause's values (screen+fkeys).
7366 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
7367 # which is NOT the same as the terminfo screen.<term>.
7368 # (e) when screen finds one of these customized entries, it sets $TERM to
7369 # match. Hence, no "screen.xterm" entry is provided, since that would
7370 # create heartburn for people running remote xterm's.
7371 # (f) screen does not support rep.
7373 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
7374 # since the default translations override the built-in keycode
7375 # translation. They are suppressed here to show what is tested by tack.
7376 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
7378 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
7379 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7380 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
7381 E3@, use=screen+italics, use=screen+fkeys,
7382 use=xterm+x11mouse, use=xterm-new,
7383 #:screen.xterm|screen for modern xterm,
7384 #: use=screen.xterm-new,
7385 # xterm-r6 does not really support khome/kend unless it is propped up by
7386 # the translations resource.
7387 screen.xterm-r6|screen customized for X11R6 xterm,
7388 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
7389 # Color applications running in screen and TeraTerm do not play well together
7390 # on Solaris because Sun's curses implementation gets confused.
7391 screen.teraterm|disable ncv in teraterm,
7393 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7394 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7395 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7396 use=screen+fkeys, use=xterm+x11mouse, use=screen4,
7398 screen.rxvt|screen in rxvt,
7400 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7401 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
7402 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
7404 screen.Eterm|screen in Eterm,
7405 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
7406 screen.mrxvt|screen in mrxvt,
7407 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
7408 screen.vte|screen in any VTE-based terminal,
7409 use=xterm+x11mouse, use=screen+italics,
7410 use=screen+fkeys, use=vte,
7411 screen.gnome|screen in GNOME Terminal,
7412 use=xterm+x11mouse, use=screen+italics,
7413 use=screen+fkeys, use=gnome,
7414 screen.konsole|screen in KDE console window,
7415 use=xterm+x11mouse, use=screen+italics,
7416 use=screen+fkeys, use=konsole,
7417 # fix the backspace key
7418 screen.linux|screen in linux console,
7420 kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys,
7422 screen.mlterm|screen in mlterm,
7423 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
7424 screen.putty|screen in putty,
7425 use=xterm+x11mouse, use=screen+fkeys, use=putty,
7427 # The default "screen" entry is reasonably portable, but not optimal for the
7428 # most widely-used terminal emulators. The "bce" capability is supported in
7429 # screen since 3.9.13, and when used, will require fewer characters to be sent
7430 # to the terminal for updates.
7432 # If you are using only terminals which support bce, then you can use this
7433 # feature in your screen configuration.
7435 # Adding these lines to your ".screenrc" file will allow using these customized
7440 screen-bce.xterm-new|screen optimized for modern xterm,
7442 ech@, use=screen+italics, use=screen.xterm-new,
7443 screen-bce.rxvt|screen optimized for rxvt,
7445 ech@, use=screen.rxvt,
7446 screen-bce.Eterm|screen optimized for Eterm,
7448 ech@, use=screen.Eterm,
7449 screen-bce.mrxvt|screen optimized for mrxvt,
7451 ech@, use=screen.mrxvt,
7452 screen-bce.gnome|screen optimized for GNOME-Terminal,
7454 ech@, use=screen+italics, use=screen.gnome,
7455 screen-bce.konsole|screen optimized for KDE console window,
7457 ech@, use=screen+italics, use=screen.konsole,
7458 screen-bce.linux|screen optimized for linux console,
7460 ech@, use=screen.linux,
7462 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
7463 cols#132, use=screen4,
7465 screen2|old VT 100/ANSI X3.64 virtual terminal,
7466 cols#80, it#8, lines#24,
7467 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
7468 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7469 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7470 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7471 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
7472 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7473 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
7474 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
7475 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
7476 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
7477 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
7478 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
7479 screen3|older VT 100/ANSI X3.64 virtual terminal,
7481 cols#80, it#8, lines#24,
7482 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7483 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7484 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7485 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
7486 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7487 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
7488 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
7489 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
7490 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
7491 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
7492 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
7493 smul=\E[4m, tbc=\E[3g,
7495 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
7496 # was last updated in 2009 to include 256-color support. The most recent
7497 # release is 4.6.2 (October 2017).
7498 screen4|VT 100/ANSI X3.64 virtual terminal,
7499 use=ecma+index, use=screen,
7501 # As of March 2019, screen 5.0 has not been released.
7505 # https://savannah.gnu.org/bugs/?36676
7507 # mentions a change to implement italics which should be in a version 5,
7508 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the
7509 # longstanding use of SGR 3 for standout, and interprets it as italics.
7511 # The same development branch has some support for direct-colors, but none
7512 # of this has been documented.
7513 screen5|VT 100/ANSI X3.64 virtual terminal (someday),
7515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7516 %p5%t;2%;m%?%p9%t\016%e\017%;,
7517 smso=\E[7m, use=ecma+italics, use=screen4,
7521 # tmux is mostly compatible with screen, but has support for italics, and some
7522 # of the xterm cursor bits.
7524 # However, unlike screen, tmux has no provision for using derived terminal
7525 # descriptions. When screen starts, it looks for a suitable "inner" terminal
7526 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
7527 # various entries such as screen.xterm-new provide a way to more closely
7528 # match the terminal.
7529 tmux|tmux terminal multiplexer,
7530 invis=\E[8m, rmso=\E[27m,
7531 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7532 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7533 smso=\E[7m, E3=\E[3J, Smulx=\E[4\:%p1%dm,
7534 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
7535 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
7538 tmux-256color|tmux with 256 colors,
7539 use=xterm+256setaf, use=tmux,
7544 # http://www.brain-dump.org/projects/dvtm/
7546 # + This uses ncurses to manage the display, including support for italics and
7548 # + However, default-colors are incomplete: do not set bce.
7549 # + It does not implement flash (since no \e[?5h)
7550 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
7551 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
7552 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
7553 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
7555 # + It also omits the shifted cursor- and editing-keypad keys.
7556 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
7557 # (and passes those through without interpretation)
7558 # and may simply pass-through rxvt's, making it appear to work.
7559 # In other cases such as kf23 and up, no pass-through is done.
7560 # + Most of the mode-settings in the initialization/reset strings are not
7561 # implemented; dvtm copies its description from rxvt.
7562 dvtm|dynamic virtual terminal manager,
7563 am, eo, mir, msgr, xenl, AX,
7564 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
7565 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7566 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7567 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7568 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7569 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7570 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7571 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7572 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7573 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7574 is1=\E[?47l\E=\E[?1l,
7575 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
7576 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
7577 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
7578 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
7579 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7580 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
7581 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7582 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7583 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7584 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
7585 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7586 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
7587 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
7588 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7589 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
7591 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
7592 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
7594 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
7596 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
7598 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
7599 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7602 dvtm-256color|dynamic virtual terminal manager with 256 colors,
7603 colors#0x100, pairs#0x10000,
7604 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
7606 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
7612 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
7613 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
7614 # been maintained until recently by the National Center for Supercomputer
7615 # Applications, and it is feature rich, stable and free. It can be downloaded
7616 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
7617 # xterm+sl, and the docs at NCSA. It works well.
7619 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
7620 # The terminal options should be set as follows:
7621 # Xterm sequences ON
7622 # use VT wrap mode ON
7623 # use Emacs arrow keys OFF
7624 # CTRL-COMND is Emacs meta ON
7626 # answerback string: "ncsa-vt220-8"
7627 # setup keys: all disabled
7629 # Application mode is not used.
7631 # Other special mappings:
7638 # PAGEDOWN Next Screen
7640 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
7643 # The status-line manipulation is a mapping of the xterm-compatible control
7644 # sequences for setting the window-title. So you must use tsl and fsl in
7645 # pairs, since the latter ends the string that is loaded to the window-title.
7646 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7647 am, km, mir, msgr, xenl,
7648 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7649 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7650 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7651 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7652 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7654 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7655 el=\E[K, el1=\E[1K, enacs=\E)0,
7656 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7657 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
7658 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
7659 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
7660 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7661 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
7662 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
7663 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
7664 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
7665 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
7666 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
7667 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
7668 rmso=\E[27m, rmul=\E[24m,
7669 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
7670 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
7672 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
7673 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7674 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
7675 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7676 use=ncsa-m, use=klone+color,
7677 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7679 dsl@, fsl@, tsl@, use=ncsa,
7680 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7682 dsl@, fsl@, tsl@, use=ncsa-m,
7684 # The documented function-key mapping refers to the Apple Extended Keyboard
7685 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
7686 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
7687 # some keyboards and many applications require these as F1-F4.
7689 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
7690 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7691 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7692 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
7693 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
7694 kf8=\E[19~, kf9=\E[20~, use=ncsa,
7696 #### Pilot Pro Palm-Top
7698 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
7699 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
7700 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
7703 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
7704 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
7705 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
7708 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
7709 # These entries are for the Embeddable Linux Kernel System (ELKS)
7710 # project - an heavily stripped down Linux to be run on 16 bit
7711 # boxes or, eventually, to be used in embedded systems - and have been
7712 # adapted from the stock ELKS termcap. The project itself looks stalled,
7713 # and the latest improvements I know of date back to March 2000.
7715 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
7716 # as an added bonus, this deals with all the capabilities common to
7717 # both VT52 and ANSI (or, eventually, "special") modes.
7719 elks-glasstty|ELKS glass-TTY capabilities,
7721 cols#80, it#8, lines#25,
7722 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
7725 elks-vt52|ELKS vt52 console,
7726 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7727 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
7728 home=\EH, use=elks-glasstty,
7730 elks-ansi|ELKS ANSI console,
7731 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7732 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7733 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
7735 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
7736 # instead of VT52, but the "elks" entry still refers to the latter.
7738 elks|default ELKS console,
7741 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
7742 # one but in screen size
7744 sibo|ELKS SIBO console,
7745 cols#61, it#8, lines#20, use=elks-vt52,
7747 ######## COMMERCIAL WORKSTATION CONSOLES
7753 # This is from the OSF/1 Release 1.0 termcap file
7754 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
7757 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7758 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7759 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
7760 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7761 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7766 # :is1: resets scrolling region in case a previous user had used "tset vt100"
7767 oldsun|Sun Microsystems Workstation console,
7768 OTbs, am, km, mir, msgr,
7769 cols#80, it#8, lines#34,
7770 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
7771 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7772 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7773 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7774 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7775 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
7776 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7777 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
7778 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
7779 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
7780 sun-il|Sun Microsystems console with working insert-line,
7783 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7784 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7785 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7786 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7787 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7788 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
7789 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
7790 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
7791 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
7792 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
7793 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
7794 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7795 smso=\E[7m, u8=\E[1t, u9=\E[11t,
7796 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
7797 # flake out on the last line. Unfortunately, without them the terminal has no
7799 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
7800 il@, il1@, use=sun-il,
7801 # If you are using an SS5, change the sun definition to use sun-ss5.
7802 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
7805 sun+sl|Sun Workstation window status line,
7807 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
7809 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
7810 sun-s|Sun Microsystems Workstation window with status line,
7812 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
7813 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
7815 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
7816 sun-48|Sun 48-line window,
7817 cols#80, lines#48, use=sun,
7818 sun-34|Sun 34-line window,
7819 cols#80, lines#34, use=sun,
7820 sun-24|Sun 24-line window,
7821 cols#80, lines#24, use=sun,
7822 sun-17|Sun 17-line window,
7823 cols#80, lines#17, use=sun,
7824 sun-12|Sun 12-line window,
7825 cols#80, lines#12, use=sun,
7826 sun-1|Sun 1-line window for sysline,
7829 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
7830 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
7831 ich1@, rmir@, smir@, use=sun,
7832 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
7834 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
7835 sun-type4|Sun Workstation console with type 4 keyboard,
7836 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
7837 kcuu1=\E[215z, use=sun-il,
7839 # Most of the current references to sun-color are from users wondering why this
7840 # is the default on install. Details from reading the wscons manpage, adding
7841 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
7842 # when those were added -TD (2005-05-28)
7844 # According to wscons manpage, color is supported only on IA systems.
7845 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
7846 # does not list these. It also sets ncv#3, however that corresponds to
7847 # underline and standout.
7849 # Since the documentation and terminfo do not agree, see also current code at
7850 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
7852 # That (actually a different driver which "supports" sun-color) also supports
7859 # It supports bold, but not underline -TD (2009-09-19)
7860 sun-color|Sun Microsystems Workstation console with color support (IA systems),
7861 colors#8, ncv#3, pairs#64,
7862 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
7863 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
7864 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7865 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7867 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7869 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7870 smso=\E[7m, use=sun,
7875 # (wsiris: this had extension capabilities
7876 # :HS=\E7F2:HE=\E7F7:\
7877 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
7878 # See the note on Iris extensions near the end of this file.
7879 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
7880 # <flash> from BRL -- esr)
7881 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
7882 OTbs, OTnc, OTpt, am,
7883 OTkn#3, cols#80, it#8, lines#40,
7884 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
7885 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7886 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
7887 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
7888 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
7889 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
7890 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
7891 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
7896 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
7897 # environment). Note: these have nothing to do with Sony's News workstation
7901 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
7902 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
7903 psterm|psterm-basic|NeWS psterm-80x34,
7904 OTbs, am, hs, km, ul,
7905 cols#80, it#8, lines#34,
7906 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
7907 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
7908 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
7909 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
7910 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
7911 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
7912 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
7914 psterm-96x48|NeWS psterm 96x48,
7915 cols#96, lines#48, use=psterm,
7916 psterm-90x28|NeWS psterm 90x28,
7917 cols#90, lines#28, use=psterm,
7918 psterm-80x24|NeWS psterm 80x24,
7919 cols#80, lines#24, use=psterm,
7920 # This is a faster termcap for psterm. Warning: if you use this termcap,
7921 # some control characters you type will do strange things to the screen.
7922 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
7923 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
7924 OTbs, am, hs, km, ul,
7925 cols#80, it#8, lines#34,
7926 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
7927 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
7928 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
7929 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7930 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
7931 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
7932 smso=^Oo, smul=^Ou, tsl=^Ol,
7936 # Use `glasstty' for the Workspace application
7939 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
7942 cols#80, it#8, lines#24,
7943 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7944 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7945 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7946 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
7947 nextshell|NeXT Shell application,
7950 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
7953 #### Sony NEWS workstations
7956 # (news-unk: this had :KB=news: -- esr)
7957 news-unk|SONY NEWS vt100 emulator common entry,
7958 OTbs, OTpt, am, xenl,
7960 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
7961 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7962 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
7963 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7964 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
7965 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
7966 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
7967 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
7968 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
7969 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7970 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
7971 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7973 # (news-29: this had :TY=ascii: --esr)
7974 news-29|SONY NEWS vt100 emulator with 29 lines,
7975 lines#29, use=news-unk,
7976 # (news-29-euc: this had :TY=euc: --esr)
7977 news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
7979 # (news-29-sjis: this had :TY=sjis: --esr)
7980 news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
7983 # (news-33: this had :TY=ascii: --esr)
7984 news-33|SONY NEWS vt100 with 33 lines,
7985 lines#33, use=news-unk,
7986 # (news-33-euc: this had :TY=euc: --esr)
7987 news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
7989 # (news-33-sjis: this had :TY=sjis: --esr)
7990 news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
7993 # (news-42: this had :TY=ascii: --esr)
7994 news-42|SONY NEWS vt100 with 42 lines,
7995 lines#42, use=news-unk,
7996 # (news-42-euc: this had :TY=euc: --esr)
7997 news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
7999 # (news-42-sjis: this had :TY=sjis: --esr)
8000 news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
8003 # NEWS-OS old termcap entry
8005 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
8006 news-old-unk|SONY NEWS vt100 emulator common entry,
8007 OTbs, OTpt, am, xenl,
8009 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
8010 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
8011 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8012 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
8013 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
8014 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
8015 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
8016 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8017 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
8019 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
8020 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
8023 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
8027 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
8028 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
8030 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
8033 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
8034 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
8037 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
8041 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
8042 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
8045 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
8049 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
8050 # also the alias vt100-bm.
8051 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
8054 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
8058 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
8059 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
8062 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
8066 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
8067 news28|sony vt100 emulator 28 lines,
8070 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
8074 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
8075 news29|news28-a|sony vt100 emulator 29 lines,
8077 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
8081 # (news511: this had :TY=sjis: --esr)
8082 nwp511|nwp-511|nwp-511 vt100,
8083 OTbs, OTpt, am, xenl,
8085 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8086 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
8087 ed=\E[J$<30/>, el=\E[K$<3/>,
8088 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8089 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
8090 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
8091 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
8092 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8093 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
8094 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8095 # (news517: this had :TY=sjis:. --esr)
8096 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
8099 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8100 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
8101 tsl=\E[1$}\E[;%df, use=vt200,
8102 # (news517-w: this had :TY=sjis:. --esr)
8103 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
8106 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
8107 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8108 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
8109 tsl=\E[1$}\E[;%df, use=vt200,
8111 #### Common Desktop Environment
8114 # This ships with Sun's CDE in Solaris 2.5
8115 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
8116 dtterm|CDE desktop terminal,
8117 am, mir, msgr, xenl, xon,
8118 cols#80, it#8, lines#24, lm#0, ncv@,
8119 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8120 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
8121 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
8122 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8123 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
8124 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8125 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
8126 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8127 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
8128 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8129 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
8130 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8131 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
8132 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
8133 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
8134 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
8135 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8136 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
8137 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
8138 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
8140 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
8141 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8142 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8143 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
8145 ######## Non-Unix Consoles
8148 #### EMX termcap.dat compatibility modes
8150 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
8151 # no_color_video to inform the application that standout(1), underline(2)
8152 # reverse(4) and invisible(64) don't work with color.
8153 emx-base|DOS special keys,
8156 bel=^G, use=ansi.sys,
8158 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
8159 # a Unix-style environment used on OS/2. (Note that the suffix makes some
8160 # names longer than 14 characters, the nominal maximum).
8162 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
8163 ansi-emx|ANSI.SYS color,
8164 am, bce, eo, mir, msgr, xon,
8165 colors#8, cols#80, it#8, lines#25, pairs#64,
8166 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
8167 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
8168 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8169 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
8170 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
8171 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
8172 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
8173 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
8174 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
8175 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
8176 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
8177 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
8178 # nice colors for Emacs (white on blue, mode line white on cyan)
8179 ansi-color-2-emx|ANSI.SYS color 2,
8180 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
8181 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
8182 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
8183 smul=\E[1;36;44m, use=ansi-emx,
8184 # nice colors for Emacs (white on black, mode line black on cyan)
8185 ansi-color-3-emx|ANSI.SYS color 3,
8186 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
8187 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
8188 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
8189 smul=\E[0;36;40m, use=ansi-emx,
8190 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
8192 cols#80, it#8, lines#24,
8193 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8194 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
8195 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
8196 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
8197 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
8198 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
8203 # Use this for cygwin32 (tested with beta 19.1)
8204 # underline is colored bright magenta
8205 # shifted kf1-kf12 are kf11-kf22
8206 cygwinB19|ANSI emulation for cygwin32,
8207 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8208 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
8209 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8210 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8211 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
8212 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8213 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
8216 # Use this for cygwin (tested with version 1.1.0).
8217 # I've combined pcansi and linux. Some values of course were different and
8218 # I've indicated which of these were and which I used.
8219 # Cheers, earnie_boyd@yahoo.com
8220 # several changes based on running with tack and comparing with older entry -TD
8221 # more changes from csw:
8223 # remove eo [erase overstrike with blank]
8224 # change clear was \E[H\E[J now \E[2J (faster?)
8227 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
8229 # add cub [cursor back param]
8230 # add cuf [cursor forward param]
8231 # add cuu [cursor up param]
8232 # add cud [cursor down param]
8233 # add hs [has status line]
8234 # add fsl [return from status line]
8235 # add tsl [go to status line]
8236 # add smacs [Start alt charset] (not sure if this works)
8237 # add rmacs [End alt charset] (ditto)
8238 # add smcup [enter_ca_mode] (save console; thanks Corinna)
8239 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
8240 # add kb2 [center of keypad]
8241 # add u8 [user string 8] \E[?6c
8242 # add el [clear to end of line] \E[K
8244 # cnorm [make cursor normal] not implemented
8245 # flash [flash] not implemented
8246 # blink [blink] not implemented very usefully in cygwin? \E[5m
8247 # dim [dim] not implemented very usefully in cygwin? \E[2m
8248 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
8249 # kNXT [shifted next key] not implemented
8250 # kPRV [shifted prev key] not implemented
8251 # khome [home key] really is \E[1~ NOT \E[H
8252 # tbc [clear tab stops] not implemented
8253 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
8254 # smpch [Start PC charset] is \E[11m, same as smacs
8255 # rmpch [End PC charset] is \E[10m, same as rmacs
8256 # mir [move in insert mode] fails in tack?
8257 # bce [back color erase] causes problems with change background color?
8258 # cvvis [make cursor very visible] causes a stackdump when testing with
8259 # testcurs using the output option? \E[?25h\E[?8c
8260 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
8261 # ech [erase characters param] broken \E[%p1%dX
8262 # kcbt [back-tab key] not implemented in cygwin? \E[Z
8265 # Remove cbt since it does not work in current cygwin
8266 # Add 'mir' and 'in' flags based on tack
8267 cygwin|ANSI emulation for Cygwin,
8268 am, hs, mir, msgr, xon,
8269 colors#8, it#8, pairs#64,
8270 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8271 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8272 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8273 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
8274 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
8275 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8276 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8277 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
8278 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
8279 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
8280 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8281 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
8282 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8283 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8284 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
8285 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8286 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
8287 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
8288 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
8289 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
8290 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8291 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
8292 %t;8%;%?%p9%t;11%;m,
8293 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
8294 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
8295 vpa=\E[%i%p1%dd, use=vt102+enq,
8297 # I've supplied this so that you can help test new values and add other
8298 # features. Cheers, earnie_boyd@yahoo.com.
8300 # Some features are from pcansi. The op value is from linux. Function-keys
8301 # are from linux. These have been tested not to cause problems. xenl was in
8302 # this list, but DOES cause problems so it has been removed
8303 cygwinDBG|Debug Version for Cygwin,
8304 am, eo, mir, msgr, xon,
8305 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
8306 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8307 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8308 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8309 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
8310 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
8311 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8312 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8313 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
8314 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8315 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
8316 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
8317 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
8318 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
8319 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
8320 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8321 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8322 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
8323 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
8324 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
8325 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
8326 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
8327 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
8328 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8329 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
8330 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
8331 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
8332 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
8337 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
8338 # encodings used by other x86 environments. All others are invented for DJGPP.
8339 # Oddly enough, while several combinations of modifiers are tabulated, there is
8340 # none for shifted cursor keys.
8392 # Ctrl-Delete \E[43~
8393 # Ctrl-Down Arrow \E[38~
8396 # Ctrl-Insert \E[42~
8397 # Ctrl-Left Arrow \E[39~
8398 # Ctrl-Page Down \E[46~
8399 # Ctrl-Page Up \E[45~
8400 # Ctrl-Right Arrow \E[40~
8401 # Ctrl-Up Arrow \E[37~
8417 # Alt-Down Arrow \E[60~
8421 # Alt-Left Arrow \E[61~
8422 # Alt-Page Down \E[68~
8423 # Alt-Page Up \E[67~
8424 # Alt-Right Arrow \E[62~
8425 # Alt-Up Arrow \E[59~
8454 djgpp|ANSI emulation for DJGPP alpha,
8455 am, bce, msgr, xhp, xon, xt,
8456 colors#8, it#8, pairs#64,
8457 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8458 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8459 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8460 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
8461 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
8462 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8463 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8464 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8465 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8466 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
8467 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
8468 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8469 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
8470 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
8471 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8472 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
8473 op=\E[37;40m, rev=\E[7m, ri=\E[T, rmso=\E[m,
8474 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8475 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
8476 %p6%t;1%;%?%p7%t;8%;m,
8477 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8480 djgpp203|Entry for DJGPP 2.03,
8482 cols#80, it#8, lines#25,
8483 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
8486 djgpp204|Entry for DJGPP 2.04,
8488 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
8489 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
8490 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
8491 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
8492 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8493 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
8494 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
8495 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
8496 il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D,
8497 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
8498 kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, kf3=\E[[C,
8499 kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
8500 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~,
8501 kpp=\E[5~, nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m,
8502 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
8503 smso=\E[7m, smul=\E[4m, use=ecma+index,
8507 # This is tested using U/Win's telnet. Scrolling is omitted because it is
8508 # buggy. Another odd bug appears when displaying "~" in alternate character
8509 # set (the emulator spits out error messages). Compare with att6386 -TD
8510 uwin|U/Win 3.2 console,
8511 am, eo, in, msgr, xenl, xon,
8512 colors#8, it#8, ncv#58, pairs#64,
8513 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
8514 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
8515 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
8516 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
8517 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
8518 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8519 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
8520 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
8521 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8522 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
8523 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
8524 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
8525 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
8526 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
8527 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
8528 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
8529 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
8530 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
8532 #### Microsoft (miscellaneous)
8534 # This entry fits the Windows NT console when the _POSIX_TERM environment
8535 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
8536 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
8537 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
8538 # systems is not, and (surprise!) they match very well.
8540 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
8541 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
8542 # are the installation instructions a pile of mind-numbing bureaucratese,
8543 # but the termcap entry is actually broken and unusable as given; the :do:
8544 # capability is misspelled "d".
8546 # To use this, you need to a bunch of environment variables:
8548 # SET _POSIX_TERM=on
8550 # SET TERMCAP=location of termcap file in POSIX file format
8551 # which is case-sensitive.
8552 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
8555 # Important note: setting the TMP environment variable in POSIX style renders
8556 # it incompatible with a lot of other applications, including Visual C++. So
8557 # you should have a separate command window just for vi. All the other
8558 # variables may be permanently set in the Control Panel\System applet.
8560 # You can find out more about the restrictions of this facility at
8561 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
8563 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
8564 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
8566 cols#80, it#8, lines#25,
8567 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8568 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8569 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
8570 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
8571 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
8572 # From: jew@venus.sunquest.com
8573 # Date: 19 Feb 93 23:41:07 GMT
8574 # Here's a combination of ansi and vt100 termcap
8575 # entries that works nearly perfectly for me
8576 # (Gateway 2000 Handbook and Microsoft Works 3.0):
8577 pcmw|PC running Microsoft Works,
8579 cols#80, it#8, lines#24, vt#3,
8580 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
8581 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
8582 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
8583 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
8584 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
8585 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8586 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
8587 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
8588 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8589 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8590 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8593 # From: Federico Bianchi
8594 # This is the entry for the OpenNT terminal.
8595 # The ntconsole name is for backward compatibility.
8596 # This is for OpenNT 2.0 and later.
8597 # Later OpenNT was renamed to Interix.
8599 # Presently it is distributed by Microsoft as Services For Unix (SFU).
8600 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
8601 # the documentation dated from 1.9.9e) -TD
8603 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
8604 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
8605 # kf13-kf24 use the shift-key
8606 # kf25-kf36 use the left alt-key
8607 # kf37-kf38 use the control-key
8608 # kf49-kf60 use the shift- and control-keys
8609 # The shifted cursor keys send the sequences originally used for kf61-kf64:
8612 # left=\EF^ (unassigned)
8615 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
8617 cols#80, it#8, lines#25,
8618 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8619 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8620 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8621 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
8622 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
8623 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8624 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8625 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
8626 kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8627 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U,
8628 kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC,
8629 kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH,
8630 kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL,
8631 kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ,
8632 kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU,
8633 kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ,
8634 kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4,
8635 kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi,
8636 kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo,
8637 kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs,
8638 kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx,
8639 kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9,
8640 khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T,
8641 kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u,
8642 rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
8643 rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b,
8644 smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color,
8646 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
8647 lines#35, use=opennt,
8649 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
8650 lines#50, use=opennt,
8652 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
8653 lines#60, use=opennt,
8655 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
8656 lines#100, use=opennt,
8658 # OpenNT wide terminals
8659 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
8660 cols#125, use=opennt,
8662 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
8663 lines#35, use=opennt-w,
8665 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
8666 lines#50, use=opennt-w,
8668 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
8669 lines#60, use=opennt-w,
8671 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
8672 cols#132, use=opennt,
8674 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
8675 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
8676 rmcup@, smcup@, use=opennt,
8678 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
8679 lines#35, use=opennt-nti,
8681 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
8682 lines#50, use=opennt-nti,
8684 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
8685 lines#60, use=opennt-nti,
8687 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
8688 lines#100, use=opennt-nti,
8690 ######## COMMON TERMINAL TYPES
8692 # This section describes terminal classes and maker brands that are still
8693 # quite common, but have proprietary command sets not blessed by ANSI.
8698 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
8699 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
8700 # Acer has a web site at http://www.acer.com.
8702 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
8703 # His comments suggest they were shipped with the system.
8706 # (altos2: had extension capabilities
8707 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8708 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8709 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8710 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8711 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8712 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
8713 # :HL=^AP\r:SP=\E[i:\
8714 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
8715 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
8716 # Comparison with the k* capabilities makes it obvious that the c* things are
8717 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
8718 # :sr: was given as a boolean-- esr)
8719 altos2|alt2|altos-2|altos II,
8720 cols#80, it#8, lines#24, xmc#0,
8721 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
8722 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
8723 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
8724 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
8725 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
8726 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
8727 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
8728 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8729 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8730 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8731 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8732 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
8733 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
8734 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
8735 # (altos3: had extension capabilities
8736 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8737 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8738 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8739 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8740 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8741 # :HL=^AP\r:SP=\E[i:\
8742 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
8743 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
8744 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
8745 altos4|alt4|altos-4|altos IV,
8747 # (altos7: had extension capabilities:
8748 # :GG#0:GI=\EH8:GF=\EH7:\
8749 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8750 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8751 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8752 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8753 # Comparison with the k* capabilities makes it obvious that the c* things are
8754 # shift keys. I have renamed them to keys 32 and up accordingly. I have
8755 # also made this entry relative to adm12 in order to give it an <sgr>. The
8756 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
8757 altos7|alt7|altos VII,
8759 cols#80, lines#24, xmc#0,
8760 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
8761 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8762 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8763 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
8765 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
8766 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
8767 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
8768 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8769 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8770 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8771 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8772 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
8773 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
8774 rmir=\Er, smir=\Eq, use=adm+sgr,
8775 altos7pc|alt7pc|altos PC VII,
8776 kend=\ET, use=altos7,
8778 #### Hewlett-Packard (hp)
8781 # 8000 Foothills Blvd
8782 # Roseville, CA 95747
8783 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
8784 # 1-(800)-633-3600 (General customer support)
8787 # As of March 1998, HP no longer has any terminals in production.
8788 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
8789 # supported (they still have parts). So are the 2392a and 2394a.
8790 # See the WORKSTATION CONSOLES section for the 700s.
8793 # Generic HP terminal - this should (hopefully) work on any HP terminal.
8794 hpgeneric|hp|hewlett-packard generic terminal,
8795 OTbs, OTpt, am, da, db, mir, xhp,
8796 cols#80, lines#24, lm#0, vt#6,
8797 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8798 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
8799 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
8800 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
8801 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
8804 hp110|hewlett-packard model 110 portable,
8805 lines#16, use=hpgeneric,
8807 hp+pfk+cr|hp function keys with CR,
8808 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
8809 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
8811 hp+pfk-cr|hp function keys w/o CR,
8812 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
8815 # The hp2621s use the same keys for the arrows and function keys,
8816 # but not separate escape sequences. These definitions allow the
8817 # user to use those keys as arrow keys rather than as function
8819 hp+pfk+arrows|hp alternate arrow definitions,
8820 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
8821 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
8822 kll=\Eq\r, kri=\Es\r,
8824 hp+arrows|hp arrow definitions,
8825 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8826 kind=\ES, kll=\EF, kri=\ET,
8828 # Generic stuff from the HP 262x series
8830 hp262x|HP 262x terminals,
8832 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
8833 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8834 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8835 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
8836 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8837 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8838 %;%?%p4%t%{65}%|%;%c,
8839 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
8841 # Note: no <home> on HPs since that homes to top of memory, not screen.
8842 # Due to severe 2621 braindamage, the only way to get the arrow keys to
8843 # transmit anything at all is to turn on the function key labels
8844 # with <smkx>, and even then the user has to hold down shift!
8845 # The default 2621 turns off the labels except when it has to to
8846 # enable the function keys. If your installation prefers labels
8847 # on all the time, or off all the time (at the "expense" of the
8848 # function keys), use 2621-nl or 2621-wl.
8850 # Note: there are newer ROMs for 2621's that allow you to set
8851 # strap A so the regular arrow keys xmit \EA, etc, as with the
8852 # 2645. However, even with this strap set, the terminal stops
8853 # xmitting if you reset it, until you unset and reset the strap!
8854 # Since there is no way to set/unset the strap with an escape
8855 # sequence, we don't use it in the default.
8856 # If you like, you can use 2621-ba (brain-damaged arrow keys).
8857 hp2621-ba|2621 w/new rom and strap A set,
8858 rmkx@, smkx@, use=hp+arrows, use=hp2621,
8860 # hp2621 with function labels. Most of the time they are off,
8861 # but inside vi, the function key labels appear. You have to
8862 # hold down shift to get them to xmit.
8863 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
8864 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
8868 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
8869 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
8870 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
8871 use=hp+pfk+cr, use=hpgeneric,
8873 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
8874 hp2621p|hp 2621 with printer,
8875 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
8877 hp2621p-a|hp2621p with fn as arrows,
8878 use=hp+pfk+arrows, use=hp2621p,
8880 # hp2621 with k45 keyboard
8881 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
8882 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8883 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
8885 # 2621 using all 48 lines of memory, only 24 visible at any time.
8886 hp2621-48|48 line 2621,
8888 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
8891 # 2621 with no labels ever. Also prevents vi delays on escape.
8892 hp2621-nl|hp 2621 with no labels,
8893 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
8896 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
8899 hp2621-nt|hp 2621 w/no tabs,
8902 # Hp 2624 B with 4 or 10 pages of memory.
8904 # Some assumptions are made with this entry. These settings are
8905 # NOT set up by the initialization strings.
8907 # Port Configuration
8912 # Terminal Configuration
8918 # Note: the 2624 DOES have a true <home>, believe it or not!
8920 # The 2624 has an "error line" to which messages can be sent.
8921 # This is CLOSE to what is expected for a "status line". However,
8922 # after a message is sent to the "error line", the next carriage
8923 # return is EATEN and the "error line" is turned back off again!
8924 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
8926 # This entry supports emacs (and any other program that uses raw
8927 # mode) at 4800 baud and less. I couldn't get the padding right
8930 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
8931 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
8934 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
8936 # This hp2626 entry does not use any of the fancy windowing stuff
8939 # Indeed, terminfo does not yet handle such stuff. Since changing
8940 # any window clears memory, it is probably not possible to use
8941 # this for screen opt.
8943 # ed is incredibly slow most of the time - I am guessing at the
8944 # exact padding. Since the terminal uses xoff/xon this is intended
8945 # only for cost computation, so that the terminal will prefer el
8946 # or even dl1 which is probably faster!
8948 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
8949 # extra slow on the last line of the window.
8951 # The padding probably should be changed.
8953 hp2626|hp2626a|hp2626p|hp 2626,
8956 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
8957 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
8958 use=hp+labels, use=scrhp,
8960 # This entry is for sysline. It allocates a 23 line window with
8961 # a 115 line workspace for regular use, and a 1 line window for
8964 # This assumes port 2 is being used.
8965 # Turn off horizontal line, Create ws #1 with 115 lines,
8966 # Create ws #2 with 1 line, Create window #1 lines 1-23,
8967 # Create window #2 lines 24-24, Attach cursor to workspace #1.
8968 # Note that this clears the tabs so it must be done by tset before
8971 hp2626-s|hp 2626 using only 23 lines,
8974 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
8975 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
8976 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
8977 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
8978 # Force terminal back to 24 lines after being 23.
8979 hp2626-ns|hp 2626 using all 24 lines,
8980 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
8981 \s\E&w3f2I\s\E&w7f2p1I\s\r,
8983 # Various entries useful for small windows on 2626.
8984 hp2626-12|hewlett-packard 2626 12 lines,
8985 lines#12, use=hp2626,
8986 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
8987 cols#40, lines#12, use=hp2626,
8988 hp2626-x40|hewlett-packard 2626 40 columns,
8989 cols#40, use=hp2626,
8990 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
8991 lines#11, use=hp2626-s,
8994 # hp2627 color tubes from University of Wisconsin
8996 hp2627a-rev|hp 2627 with reverse video colors,
8997 cr=\r, cud1=\n, ht=^I, ind=\n,
8998 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
9000 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
9001 smul=\E&dD\E&v1S, use=hp2621-nl,
9002 hp2627a|hp 2627 color terminal with no labels,
9003 cr=\r, cud1=\n, ht=^I, ind=\n,
9004 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
9005 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
9006 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
9008 hp2627c|hp 2627 color (cyan) terminal with no labels,
9009 cr=\r, cud1=\n, ht=^I, ind=\n,
9010 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
9011 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
9013 # hp2640a doesn't have the Y cursor addressing feature, and C is
9014 # memory relative instead of screen relative, as we need.
9017 cup@, rmkx@, smkx@, use=hp2645,
9019 hp2640b|hp2644a|hp 264x series,
9020 rmkx@, smkx@, use=hp2645,
9022 # (hp2641a: removed unknown :gu: -- esr)
9023 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
9024 am, da, db, mir, xhp,
9026 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9027 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
9028 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
9029 if=/usr/share/tabset/std, il1=\EL, ind=\n,
9030 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9031 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9034 # This terminal should be used at 4800 baud or less. It needs padding for
9035 # plain characters at 9600, I guessed at an appropriate cr delay. It really
9036 # wants ^E/^F handshaking, but that doesn't work well even if you write
9037 # software to support it.
9038 hp2645|hp45|HP 2645 series,
9040 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
9041 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9042 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
9043 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
9045 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
9046 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
9047 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
9048 # You should use this terminal at 4800 baud or less.
9049 hp2648|hp2648a|HP 2648a graphics terminal,
9050 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
9051 dch1=\EP$<7>, ip=$<5>, use=hp2645,
9053 # The HP 150 terminal is a fairly vanilla HP terminal, with the
9054 # clreol standout problem. It also has graphics capabilities and
9055 # a touch screen, which we don't describe here.
9056 hp150|hewlett packard Model 150,
9059 # HP 2382a terminals, "the little ones." They don't have any
9060 # alternate character set support and sending out ^N/^O will
9061 # leave the screen blank.
9062 hp2382a|hp2382|hewlett packard 2382a,
9066 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9069 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9070 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9071 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9073 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
9075 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
9076 use=hp+pfk+arrows, use=hp2621-fl,
9078 # newer hewlett packard terminals
9080 newhpkeyboard|generic entry for HP extended keyboard,
9081 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9082 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
9083 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
9084 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
9087 newhp|generic entry for new hewlett packard terminals,
9088 am, bw, mir, xhp, xon,
9089 cols#80, lines#24, pb#4800,
9090 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
9092 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
9093 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
9094 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
9095 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
9096 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
9097 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
9098 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
9099 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
9100 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
9101 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
9102 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
9103 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
9104 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
9105 tbc=\E3, use=newhpkeyboard,
9107 memhp|memory relative addressing for new HP ttys,
9109 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
9110 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
9111 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
9112 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
9114 scrhp|screen relative addressing for new HP ttys,
9115 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
9116 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
9117 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
9118 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
9119 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
9121 # (hp+labels: added label values from a BRL termcap -- esr)
9122 hp+labels|"standard" label info for new HP ttys,
9124 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
9125 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
9127 rmln=\E&j@, smln=\E&jB,
9129 hp+printer|"standard" printer info for HP ttys,
9130 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
9133 # The new hp2621b is kind of a cross between the old 2621 and the
9134 # new 262x series of machines. It has dip-switched options.
9135 # The firmware has a bug in it such that if you give it a null
9136 # length label, the following character is eaten!
9137 hp2621b|hp 2621b with old style keyboard,
9138 lh#1, lm#48, lw#8, nlab#8,
9139 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9140 kind=\ET, kll=\EF, kri=\ES,
9141 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
9142 %;%p2%s\E%{111}%p1%+%c\r,
9143 smln=\E&jB, use=hp2621,
9145 hp2621b-p|hp 2621b with printer,
9146 use=hp+printer, use=hp2621b,
9148 # hp2621b - new 2621b with new extended keyboard
9149 # these are closer to the new 26xx series than the other 2621b
9150 hp2621b-kx|hp 2621b with extended keyboard,
9151 use=newhpkeyboard, use=hp2621b,
9153 hp2621b-kx-p|hp 2621b with new keyboard & printer,
9154 use=hp+printer, use=hp2621b-kx,
9156 # Some assumptions are made in the following entries.
9157 # These settings are NOT set up by the initialization strings.
9159 # Port Configuration
9160 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
9162 # Terminal Configuration
9163 # InhHndShk(G)=Yes InhDC2(H)=Yes
9164 # XmitFnctn(A)=No InhEolWrp=No
9167 # Hp 2622a & hp2623a display and graphics terminals
9169 hp2622|hp2622a|hp 2622,
9172 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
9174 # The 2623 is a 2622 with extra graphics hardware.
9175 hp2623|hp2623a|hp 2623,
9178 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
9179 use=hp+printer, use=hp2624,
9181 # The hewlett packard B can have an optional extra 6 pages of memory.
9182 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
9185 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
9186 lm#240, use=hp2624b-p,
9188 # Color manipulations for HP terminals
9189 hp+color|hp with colors,
9191 colors#16, ncv#17, pairs#7,
9192 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
9193 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
9194 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
9195 %t1%e.%p7%d%;z%p1%dI,
9196 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
9197 I\E&v1b1c6I\E&v1x1y7I,
9198 op=\E&v0S, scp=\E&v%p1%dS,
9200 # <is2> sets the screen to be 80 columns wide
9201 hp2397a|hp2397|hewlett packard 2397A color terminal,
9202 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
9204 # HP 700/44 Setup parameters:
9205 # Terminal Mode HP-PCterm
9206 # Inhibit Auto Wrap NO
9207 # Status Line Host Writable
9208 # PC Character Set YES
9209 # Twenty-Five Line Mode YES
9210 # XON/XOFF @128 or 64 (sc)
9211 # Keycode Mode NO or YES (sc)
9212 # Backspace Key BS or BS/DEL
9214 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
9215 # \E\\? does not turn off keycode mode
9216 # <smsc> sets alternate start/stop; keycode on
9217 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
9220 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
9222 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
9223 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
9224 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
9225 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
9227 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
9228 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9229 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
9230 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
9231 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
9232 kpp=\E[5~, rmam=\E[?7l,
9233 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
9234 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
9235 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
9236 smul=\E[4m, xoffc=g, xonc=e,
9238 # (hp2392: copied <rmir> here from hpex -- esr)
9241 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
9242 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
9243 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
9244 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
9247 hpsub|hp terminals -- capability subset,
9248 am, da, db, mir, xhp, xon,
9250 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
9251 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
9252 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
9253 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
9254 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
9255 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
9258 # May be used for most 24 x 80 hp terminals,
9259 # but has no padding added, so may allow runover in some terminals at high
9260 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
9261 # hp98x5 terminal emulators or hp98x6 consoles.
9262 # Adds xy-cursor addressing, vertical cursor addressing, home,
9263 # last line, and underline capabilities.
9265 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
9266 # moved <rmir> here from hpsub -- esr)
9267 hpex|hp extended capabilities,
9268 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
9269 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
9270 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
9272 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
9273 hp2|hpex2|hewlett-packard extended capabilities newer version,
9274 am, da, db, mir, xhp,
9275 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
9276 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
9277 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9278 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9279 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
9280 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9281 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
9282 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
9283 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
9284 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
9285 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
9286 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
9287 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
9288 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
9289 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
9290 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
9291 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
9292 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
9293 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9296 # From: <ddavis@ic.berkeley.edu>
9297 hp236|hp236 internal terminal emulator,
9300 clear=\EF, cnorm=\EDE, cub1=^H,
9301 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
9302 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
9303 sgr0=\ECI, smso=\EBI,
9305 # This works on a hp300 console running Utah 4.3 BSD
9306 # From: Craig Leres <leres@okeeffe.berkeley.edu>
9307 hp300h|HP Catseye console,
9308 OTbs, am, da, db, mir, xhp,
9309 cols#128, lines#51, lm#0, xmc#0,
9310 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
9311 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9312 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
9313 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
9314 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
9315 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
9316 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
9318 # From: Greg Couch <gregc@ernie.berkeley.edu>
9319 hp9837|hp98720|hp98721|HP 9000/300 workstations,
9320 OTbs, am, da, db, mir, xhp,
9321 cols#128, it#8, lines#46, lm#0,
9322 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
9323 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
9324 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9325 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
9326 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9327 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
9328 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
9329 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
9330 tbc=\E3, vpa=\E&a%p1%dY,
9331 # HP 9845 desktop computer from BRL
9332 # (hp9845: removed unknown capability :gu: -- esr)
9334 OTbs, am, da, db, eo, mir, xhp,
9336 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
9337 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
9338 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
9339 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9340 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
9341 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
9342 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
9343 hp98550|hp98550a|HP 9000 Series 300 color console,
9344 OTbs, am, da, db, mir, xhp,
9345 cols#128, it#8, lines#49, lm#0,
9346 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
9347 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9348 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
9349 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9350 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
9351 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9352 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
9353 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
9354 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
9355 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
9356 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9357 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
9358 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9359 # From: Victor Duchovni <vic@fine.princeton.edu>
9360 # (hp700-wy: removed obsolete ":nl=^J:";
9361 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
9362 hp700-wy|HP700/41 emulating wyse30,
9363 OTbs, am, bw, mir, msgr,
9364 cols#80, it#8, lines#24, xmc#1,
9365 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9366 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9367 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
9368 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
9369 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
9370 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
9371 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
9372 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
9373 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
9374 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
9375 hp70092|hp70092a|hp70092A|HP 700/92,
9377 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
9378 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
9379 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
9380 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
9381 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
9382 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
9383 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9384 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
9385 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
9386 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
9387 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
9388 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
9389 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
9390 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9392 bobcat|sbobcat|HP 9000 model 300 console,
9393 am, da, db, mir, xhp,
9394 cols#128, it#8, lines#47, xmc#0,
9395 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
9396 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
9397 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
9398 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
9399 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
9400 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
9401 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
9402 gator-t|HP 9000 model 237 emulating extra-tall AAA,
9403 lines#94, use=gator,
9404 gator|HP 9000 model 237 emulating AAA,
9406 cols#128, it#8, lines#47,
9407 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
9408 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
9409 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
9410 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
9411 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
9412 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9413 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
9414 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9415 gator-52|HP 9000 model 237 emulating VT52,
9416 cols#128, lines#47, use=vt52,
9417 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
9418 lines#94, use=gator-52,
9422 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
9425 # Honeywell Bull terminal. Its cursor and function keys send single
9426 # control characters and it has standout/underline glitch. Most programs
9427 # do not like these features/bugs. Visual bell is realized by flashing the
9428 # "keyboard locked" LED.
9429 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
9431 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
9432 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
9433 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
9434 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
9435 dku7003|Honeywell Bull DKU 7003 all features described,
9438 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
9439 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9442 #### Lear-Siegler (adm)
9444 # These guys are long since out of the terminals business, but
9445 # in 1995 many current terminals still have an adm type as one of their
9446 # emulations (usually their stupidest, and usually labeled adm3, though
9447 # these `adm3' emulations normally have adm3a+ capabilities).
9449 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
9450 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
9451 # was being held to ground would trigger a send of the top line on the screen.
9452 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
9453 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
9454 # for clearing up this point.)
9456 adm1a|adm1|lsi adm1a,
9459 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9460 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
9465 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9466 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9467 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
9468 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9469 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
9473 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
9474 # The following ADM-3A switch settings are assumed for normal operation:
9475 # SPACE U/L_DISP CLR_SCRN 24_LINE
9476 # CUR_CTL LC_EN AUTO_NL FDX
9477 # Other switches may be set for operator convenience or communication
9478 # requirements. I recommend
9479 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
9481 # Most of these terminals required an option ROM to support lower case display.
9482 # Open the case and look at the motherboard; if you see an open 24-pin DIP
9483 # socket, you may be out of luck.
9485 # (adm3a: some capabilities merged in from BRl entry -- esr)
9489 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
9490 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9491 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
9495 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
9498 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
9499 rmso=\EG, smso=\EG, use=adm3a+,
9500 # A lot of terminals other than adm11s use these. Wherever you see
9501 # use=adm+sgr with some of its capabilities disabled, try the
9502 # disabled ones. They may well work but not have been documented or
9503 # expressed in the using entry. We'd like to cook up an <sgr> but the
9504 # <rmacs>/<smacs> sequences of the using entries vary too much.
9505 adm+sgr|adm style highlight capabilities,
9506 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
9507 smso=\EG4, smul=\EG8,
9508 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
9509 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
9510 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
9511 # be ^Z, according to his entry.
9512 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
9513 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
9516 OTkn#8, cols#80, lines#24,
9517 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
9518 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9519 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
9520 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9521 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9522 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
9524 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
9525 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
9526 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
9527 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
9528 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
9529 # via BRL. That entry asserted <xmc#1>, but I've left that out because
9530 # neither earlier nor later ADMSs have it -- esr)
9532 # You will need to get into the supervisor setup before you can set
9533 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
9534 # see a lot more setup options.
9536 # While in supervisor setup you can also use following codes:
9538 # Ctrl-P Personality character selections (configure for example what
9539 # arrow keys send, if I recall correctly)
9540 # Ctrl-T tabs 1-80 use left&right to move and up to set and
9541 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
9542 # Ctrl-B Binary setup (probably not needed. I think that everything can
9543 # be set using normal setup)
9544 # Ctrl-A Answerback mode (enter answerback message)
9545 # Ctrl-U User friendly mode (normal setup)
9546 # Ctrl-D Defaults entire setup and function keys from EPROM tables
9547 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
9548 # Ctrl-R Reads both setup and functions keys from NVM.
9549 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
9551 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
9552 # RTS/CTS used nowadays with virtually every modem and computer. 19200
9553 # bps works fine with hardware flow control.
9555 # The following null-modem cable should fix this and enable you to use
9556 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
9557 # set ADM-12+ for DTR handshaking from supervisor setup.
9570 OTbs, OTpt, am, mir,
9571 OTug#1, cols#80, it#8, lines#24,
9572 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9573 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9574 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
9575 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
9576 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
9577 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
9578 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9579 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9580 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
9582 # (adm20: removed obsolete ":kn#7:" -- esr)
9583 adm20|lear siegler adm20,
9585 cols#80, it#8, lines#24,
9586 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
9587 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
9588 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
9589 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
9591 adm21|lear siegler adm21,
9593 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
9594 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
9595 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9596 use=adm+sgr, use=adm3a,
9597 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
9598 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
9599 # removed bogus-looking \200 from before <cup>. -- esr)
9603 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9604 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9605 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
9606 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
9608 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9609 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9610 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9611 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
9612 # ADM 31 DIP Switches
9614 # This information comes from two versions of the manual for the
9615 # Lear-Siegler ADM 31.
9619 # +-||||-------------------------------------+
9634 # +----------------------------------------------+
9635 # front of case (keyboard)
9637 # S1 - Data Rate - Modem
9638 # S2 - Data Rate - Printer
9639 # ------------------------
9641 # -------------------
9659 # S3 - Interface/Printer/Attributes
9660 # ---------------------------------
9661 # Printer Busy Control
9664 # off off off Busy not active, CD disabled
9665 # off off on Busy not active, CD enabled
9666 # off on off Busy active on J5-20, CD disabled
9667 # on off off Busy active on J5-19, CD disabled - Factory Set.
9668 # on off on Busy active on J5-19, CD enabled
9670 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
9672 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
9674 # sw6 ON enables printer BUSY active LOW - Factory Setting
9675 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
9677 # sw7 ON - steady cursor - Factory Setting
9678 # OFF - blinking cursor
9680 # sw8 ON causes selected attribute character to be displayed
9681 # OFF causes SPACE to be displayed instead - Factory Setting
9687 # sw4 sw1 sw2 sw3 sw4
9688 # ---------------------------
9689 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
9690 # Current Loop disabled - Factory Setting
9691 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
9693 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
9694 # Current Loop Disabled
9696 # sw5 ON disables dot stretching mode - Factory Setting
9697 # OFF enables dot stretching mode
9698 # sw6 ON enables blanking function
9699 # OFF enables underline function - Factory Setting
9700 # sw7 ON causes NULLS to be displayed as NULLS
9701 # OFF causes NULLS to be displayed as SPACES - Factory Setting
9703 # S5 - Word Structure
9704 # -------------------
9705 # sw1 ON enables BREAK key - Factory Setting
9706 # OFF disables BREAK key
9707 # sw2 ON selects 50Hz monitor refresh rate
9708 # OFF selects 60Hz monitor refresh rate - Factory Setting
9710 # Modem Port Selection
9713 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
9714 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
9715 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
9716 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
9717 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
9718 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
9719 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
9720 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
9722 # sw6 ON sends bit 8 a 1 (mark)
9723 # OFF sends bit 8 as 0 (space) - Factory Setting
9724 # sw7 ON selects Block Mode
9725 # OFF selects Conversation Mode - Factory Setting
9726 # sw8 ON selects Full Duplex operation
9727 # OFF selects Half Duplex operation - Factory Setting
9731 # sw1, sw2, sw6, sw7 Reserved - Factory 0
9733 # Printer Port Selection
9734 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
9736 # sw8 ON enables Printer Port
9737 # OFF disables Printer Port - Factory Setting
9739 # S7 - Polling Address
9740 # --------------------
9741 # sw1-7 Establish ASCII character which designates terminal polling address
9743 # OFF = logic 1 - Factory Setting
9744 # sw8 ON enables Polling Option
9745 # OFF disables Polling Option - Factory Setting
9748 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
9750 # This adm31 entry uses underline as the standout mode.
9751 # If the adm31 gives you trouble with standout mode, check the DIP switch in
9752 # position 6, bank @c11, 25% from back end of the circuit board. Should be
9753 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
9754 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
9755 adm31|lsi adm31 with sw6 set for underline mode,
9758 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9759 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9760 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
9761 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9762 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9763 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
9764 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
9765 adm31-old|o31|old adm31,
9766 rmul@, smso=\EG4, smul@, use=adm31,
9767 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
9771 if=/usr/share/tabset/vt100,
9772 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
9773 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
9777 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9778 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9779 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
9780 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
9781 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
9782 smir=\Eq, smul@, use=adm+sgr,
9783 # The following termcap for the Lear Siegler ADM-42 leaves the
9784 # "system line" at the bottom of the screen blank (for those who
9785 # find it distracting otherwise)
9786 adm42-ns|lsi adm-42 with no system line,
9787 cbt=\EI\EF \011, clear=\E;\EF \011,
9788 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
9789 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
9790 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
9791 smir=\Eq\EF \011, use=adm42,
9792 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
9793 # The insert mode of this terminal is commented out because it's broken for our
9794 # purposes in that it will shift the position of every character on the page,
9795 # not just the cursor line!
9796 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
9797 adm1178|1178|lsi adm1178,
9799 cols#80, lines#24, xmc#1,
9800 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
9801 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9802 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
9803 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
9804 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
9805 sgr0=\E), smso=\EG4, smul=\EG1,
9809 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
9810 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
9811 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
9813 # ComputerVision Services
9814 # 500 Old Connecticut Path
9818 # Standout mode is dim reverse-video.
9819 pt100|pt200|wren|fenix|prime pt100/pt200,
9821 cols#80, it#8, lines#24,
9822 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
9823 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
9824 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
9825 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
9826 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
9827 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
9828 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
9829 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
9831 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
9833 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
9834 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
9836 cup=\E[%i%p1%d;%p2%dH, use=pt100,
9838 rmso@, smso@, use=pt100,
9839 pt250w|Prime PT250 in 132-column mode,
9840 rmso@, smso@, use=pt100w,
9845 # 3475-A North 1st Street
9847 # Vox: (800)-457-4447
9848 # Fax: (408)-473-1510
9849 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
9851 # Qume was bought by Wyse, but still (as of early 1995) has its own support
9852 # group and production division.
9854 # Discontinued Qume models:
9856 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
9857 # built to replace them, and a qvt119+ which was a 101+ with available wide
9858 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
9859 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
9860 # ANSI-compatible terminals with the qvt323 and qvt61.
9862 # Current Qume models (as of February 1995):
9864 # All current Qume terminals have ANSI-compatible operation modes.
9865 # Qume is still producing the qvt62, which features emulations for other
9866 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
9867 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
9868 # with many emulations including Wyse370, Wyse 325, etc. Their newest
9869 # model is the qvt520, which is vt420-compatible.
9871 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
9873 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
9874 # setup mode. Shift-s should be a configuration save to NVRAM.
9876 qvt101|qvt108|qume qvt 101 and QVT 108,
9879 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
9880 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
9881 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
9882 # What seems to be going on here is that this entry was designed so that
9883 # the normal highlight is bold and standout is dim plus something else
9884 # (reverse-video maybe? But then, are there two <rev> sequences?)
9886 # Added kdch1, kil1, kdl1 based on screenshot -TD:
9887 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
9888 qvt101+|qvt101p|qume qvt 101 PLUS product,
9890 cols#80, lines#24, xmc#0,
9891 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
9892 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9893 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
9894 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9895 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
9896 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9897 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
9898 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9899 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
9900 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9901 qvt102|qume qvt 102,
9902 cnorm=\E., use=qvt101,
9903 # (qvt103: added <rmam>/<smam> based on init string -- esr)
9904 qvt103|qume qvt 103,
9906 cols#80, it#8, lines#24, vt#3,
9907 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9908 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
9909 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
9910 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
9911 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
9912 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
9913 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9914 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
9915 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
9916 rmso=\E[m$<2>, rmul=\E[m$<2>,
9917 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9918 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
9920 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
9921 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9922 qvt103-w|qume qvt103 132 cols,
9924 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
9925 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
9927 cols#80, lines#24, xmc#0,
9928 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
9929 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9930 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
9931 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
9932 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
9933 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
9934 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9935 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9936 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
9937 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9938 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
9939 lines#25, use=qvt119+,
9940 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
9942 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
9943 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
9944 lines#25, use=qvt119+,
9945 qvt203|qvt203+|qume qvt 203 Plus,
9946 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
9947 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
9948 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
9949 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
9950 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
9952 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
9954 # Since a command is present for enabling 25 data lines,
9955 # a specific terminfo entry may be generated for the 203.
9956 # If one is desired for the QVT 119 PLUS then 25 lines must
9957 # be selected in the status line (setup line 9).
9959 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
9961 is2=\E[=40h\E[?3l, use=qvt203,
9962 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
9964 rs2=\E[?3h\E[=40h, use=qvt203,
9966 #### Televideo (tvi)
9969 # 550 East Brokaw Road
9970 # PO Box 49048 95161
9972 # Vox: (408)-954-8333
9973 # Fax: (408)-954-0623
9976 # These require incredible amounts of padding.
9978 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
9979 # Televideo terminals are ANSI and PC-ANSI compatible.
9981 tvi803|televideo 803,
9982 clear=\E*$<10>, use=tvi950,
9984 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
9985 # Switch settings are:
10006 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
10022 # U do CR/LF when CR received
10023 # D do CR when CR received
10045 # S2 6 Cursor down key
10049 # S2 7 Screen colour
10053 # S2 8 DSR status (pin 6)
10057 # S2 9 DCD status (pin 8)
10061 # S2 10 DTR status (pin 20)
10064 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
10065 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
10066 tvi910|televideo model 910,
10068 cols#80, it#8, lines#24, xmc#1,
10069 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
10071 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
10072 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
10073 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
10074 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10075 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10076 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
10077 # From: Alan R. Rogers <rogers%albany@csnet-relay>
10078 # as subsequently hacked over by someone at SCO
10079 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
10081 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
10084 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
10085 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
10086 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
10087 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
10090 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
10091 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
10092 # D U D D 8O1 D U U U 8E2
10094 # S1 9 Autowrap (U = on, D = off)
10095 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
10096 # S2 1 Mode (U = block, D = conversational)
10097 # S2 2 Duplex (U = half, D = full)
10098 # S2 3 Hertz (U = 50, D = 60)
10099 # S2 4 Edit mode (U = local, D = duplex)
10100 # S2 5 Cursor type (U = underline, D = block)
10101 # S2 6 Cursor down key (U = send ^J, D = send ^V)
10102 # S2 7 Screen colour (U = green on black, D = black on green)
10103 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
10104 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
10105 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
10107 tvi910+|televideo 910+,
10108 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
10109 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
10110 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
10111 ll=\E=7\s, use=tvi910,
10113 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
10114 # <khome> from BRL entry -- esr)
10115 tvi912|tvi914|tvi920|old televideo 912/914/920,
10116 OTbs, OTpt, am, msgr,
10117 cols#80, it#8, lines#24, xmc#1,
10118 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10119 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10120 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
10121 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
10122 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10123 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10124 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10125 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
10127 # We got some new tvi912c terminals that act really weird on the regular
10128 # termcap, so one of our gurus worked this up. Seems that cursor
10129 # addressing is broken.
10130 tvi912cc|tvi912 at cowell college,
10133 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
10134 # From: Benjamin C. W. Sittler
10136 # Someone has put a scanned copy of the manual online at:
10137 # http://vt100.net/televideo/912b-om/
10139 # These terminals were produced ca. 1979, and had a 12" monochrome
10140 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
10141 # ASCII, and were generally similar to adm3a but with attributes
10142 # (including some with magic cookies), fancy half-duplex mode, and
10145 # Some operations require truly incredible amounts of padding. The
10146 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
10147 # are so slow as to be nearly unusable.
10149 # There may or may not have been a separate, earlier series of 912/920
10150 # terminals (without the "B" and "C" suffix); I have never seen one,
10151 # and the manual only describes the "B" and "C" series. The 912 and 920
10152 # are quite distinct from the 914 and 924, which were much nicer non-
10153 # magic-cookie terminals similar to the 950.
10155 # This is a new description for the following TeleVideo terminals,
10156 # distinguished chiefly by their keyboards:
10158 # TVI-912B - very odd layout, no function keys (84 keys)
10159 # TVI-920B - typewriter layout, no function keys (103 keys)
10160 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
10161 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
10163 # To choose a setting for the TERM variable, start with the model:
10165 # Model || base name
10166 # ----------||-----------
10167 # TVI-912B || tvi912b
10168 # TVI-912C || tvi912c
10169 # TVI-920B || tvi920b
10170 # TVI-920C || tvi920c
10172 # Then add a suffix from the following table describing installed options
10173 # and how you'd like to use the terminal:
10175 # Use Video | Second | Visual | Magic | Page || feature
10176 # Attributes | Page | Bell | Cookies | Print || suffix
10177 # ------------|--------|--------|---------|-------||---------
10178 # No | No | N/A | N/A | No || -unk
10179 # No | No | N/A | N/A | Yes || -p
10180 # No | Yes | No | N/A | No || -2p-unk
10181 # No | Yes | No | N/A | Yes || -2p-p
10182 # No | Yes | Yes | N/A | No || -vb-unk
10183 # No | Yes | Yes | N/A | Yes || -vb-p
10184 # Yes | No | N/A | No | N/A ||
10185 # Yes | No | N/A | Yes | N/A || -mc
10186 # Yes | Yes | No | No | N/A || -2p
10187 # Yes | Yes | No | Yes | N/A || -2p-mc
10188 # Yes | Yes | Yes | No | N/A || -vb
10189 # Yes | Yes | Yes | Yes | N/A || -vb-mc
10191 # So e.g. a model 920 C with second page memory option, visual bell
10192 # and no magic cookies would be tvi920c-vb; a model 912 B without the
10193 # second page memory option and using magic cookies would be
10198 # At 9600 baud, the terminal is prone to overflow its input buffer
10199 # during complex operations (insert/delete
10200 # character/line/screen/page), and it does not signal this over the
10201 # RS232 cable. The typical symptom of an overrun is that the terminal
10202 # starts beeping, and output becomes garbled.
10204 # The padding delays in this terminfo were derived using tack(1)
10205 # running on a Linux box connected to a TVI-920C with a later-model
10206 # (A49C1-style) ROM running at 9600 baud, so your mileage may
10207 # vary. The numbers below seem to give the terminal enough time so
10208 # that it doesn't overflow its input buffer and start losing
10213 # If you want to use the FUNCT key on a tvi912[bc], use the
10214 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
10215 # the following table (these also work on the 920 series):
10217 # Unshifted Function Keys:
10219 # Key | capname|| Equivalent
10220 # -----|--------||------------
10221 # F1 | <kf1> || FUNCT + @
10222 # F2 | <kf2> || FUNCT + A
10223 # F3 | <kf3> || FUNCT + B
10224 # F4 | <kf4> || FUNCT + C
10225 # F5 | <kf5> || FUNCT + D
10226 # F6 | <kf6> || FUNCT + E
10227 # F7 | <kf7> || FUNCT + F
10228 # F8 | <kf8> || FUNCT + G
10229 # F9 | <kf9> || FUNCT + H
10230 # F10 | <kf10> || FUNCT + I
10231 # F11 | <kf11> || FUNCT + J
10233 # Shifted Function Keys:
10235 # SHIFT + Key | capname|| Equivalent
10236 # -------------|--------||------------
10237 # SHIFT + F1 | <kf12> || FUNCT + `
10238 # SHIFT + F2 | <kf13> || FUNCT + a
10239 # SHIFT + F3 | <kf14> || FUNCT + b
10240 # SHIFT + F4 | <kf15> || FUNCT + c
10241 # SHIFT + F5 | <kf16> || FUNCT + d
10242 # SHIFT + F6 | <kf17> || FUNCT + e
10243 # SHIFT + F7 | <kf18> || FUNCT + f
10244 # SHIFT + F8 | <kf19> || FUNCT + g
10245 # SHIFT + F9 | <kf20> || FUNCT + h
10246 # SHIFT + F10 | <kf21> || FUNCT + i
10247 # SHIFT + F11 | <kf22> || FUNCT + j
10249 # PORTS AND SWITCH SETTINGS
10251 # Here are the switch settings for the TVI-912B/TVI-920B and
10252 # TVI-912C/TVI-920C:
10254 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
10255 # 2: 9600 3: 4800 4: 2400 5: 1200
10256 # 6: 600 7: 300 8: 150 9: 75
10259 # S2 UART/Terminal options:
10261 # 1: Not used Not allowed
10262 # 2: Alternate character set Standard character set
10263 # 3: Full duplex Half duplex
10264 # 4: 50 Hz refresh 60 Hz refresh
10265 # 5: No parity Send parity
10266 # 6: 2 stop bits 1 stop bit
10267 # 7: 8 data bits 7 data bits
10268 # 8: Not used Not allowed on Rev E or lower
10269 # 9: Even parity Odd parity
10270 # 10: Steady cursor Blinking cursor
10271 # (On Rev E or lower, use W25 instead of switch 10.)
10273 # S5 UART/Terminal options:
10275 # 1: P3-6 Not connected DSR received on P3-6
10276 # 2: P3-8 Not connected DCD received on P3-8
10278 # 3 Open, 4 Open: P3-20 Not connected
10279 # 3 Open, 4 Closed: DTR on when terminal is on
10280 # 3 Closed, 4 Open: DTR is connected to RTS
10281 # 3 Closed, 4 Closed: Not allowed
10283 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
10284 # all data transmitted out of the modem port (P3) will also be
10285 # transmitted out of the printer port (P4).
10287 # 6 Open, 7 Open: Not allowed
10288 # 6 Open, 7 Closed: 20ma current loop input
10289 # 6 Closed, 7 Open: RS232 input
10290 # 6 Closed, 7 Closed: Not allowed
10293 # If the jumper is installed, the effect will occur (the next time the terminal
10296 # S4/W31: Enables automatic LF upon receipt of CR from
10297 # remote or keyboard.
10298 # S4/W32: Enables transmission of EOT at the end of Send. If not
10299 # installed, a carriage return is sent.
10300 # S4/W33: Disables automatic carriage return in column 80.
10301 # S4/W34: Selects Page Print Mode as initial condition. If not
10302 # installed, Extension Mode is selected.
10304 # NON-STANDARD CAPABILITIES
10306 # Sending <u9> or <u7> returns a cursor position report in the format
10307 # YX\r, where Y and X are as in <cup>. This format is described in
10308 # <u8> and <u6>, but it's not clear how one should write an
10309 # appropriate scanf string, since we need to subtract %' ' from the
10310 # character after reading it. The <u9> capability is used by tack(1)
10311 # to synchronize during padding tests, and seems to work for that
10314 # This description also includes the obsolete termcap capabilities
10315 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
10317 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
10319 # The FUNCT modifier actually works with every normal key by sending
10320 # ^AX\r, where X is the sequence normally sent by that key. This is a
10321 # sort of meta key not currently describable in terminfo.
10323 # There are quite a few other keys (especially on the 920 models,) but
10324 # they are for the most part only useful in block mode.
10326 # These terminals have lots of forms manipulation features, mainly
10327 # useful in block mode, including "clear X to nulls" (vs. "clear X to
10328 # spaces"; nulls are sentinels for "send X" operations); "send X"
10329 # operations for uploading all or part of the screen; and block-mode
10330 # editing keys (they don't send escape sequences, but manipulate video
10331 # memory directly). Block mode is used for local editing, and protect
10332 # mode (in conjunction with the "write protect" attribute,
10333 # a.k.a. half-intensity outside of protect mode) is used to control
10334 # which parts of the screen are edited/sent/printed (by <mc0>).
10336 # There are at least two major families of ROM, "early" and
10337 # A49B1/A49C1; the major difference seems to be that the latter ROMs
10338 # support a few extra escape sequences for manipulating the off-screen
10339 # memory page, and for sending whole pages back to the host (mainly
10340 # useful in block mode.) The descriptions in this file don't use any
10341 # of those sequences: set cursor position including page (\E-PYX,
10342 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
10343 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
10344 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
10345 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
10346 # are as in <cup>, and some "send page" features mainly useful for
10347 # forms manipulation.
10349 # The keyboard enable (\E") and disable (\E#) sequences are unused,
10350 # except that a terminal reset (<is2>) enables the keyboard.
10352 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
10353 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
10357 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
10358 # sequences (I infer that in some TeleVideo terminal they may invert
10359 # and uninvert the display) so the <flash> sequence given here is a
10360 # cheesy page-flip instead.
10362 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
10363 # tack(1), so it is not included in the descriptions below.
10365 # It's not clear whether auto_left_margin (<bw>) flag should be set
10366 # for these terminals; tack says yes, so it is set here, but this
10367 # differs from other descriptions I've seen.
10369 # Extension print mode (<mc5>) echoes all characters to the printer
10370 # port [in addition to displaying them] except for the page print mode
10371 # sequence (<mc4>); this is a slight violation of the terminfo
10372 # definition for <mc5> but I don't expect it to cause problems. We
10373 # reset to page print mode in <rs1> since it may have been enabled
10376 # The descriptions with plus signs (+) are building blocks.
10378 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
10379 OTbs, OTpt, am, bw,
10380 cols#80, it#8, lines#24,
10381 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10382 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
10383 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
10384 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
10385 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
10386 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
10387 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
10388 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
10389 u7=\E?, u8=%c%c\r, u9=\E?,
10391 # This isn't included in the basic capabilities because it is
10392 # typically unusable in combination with the full range of video
10393 # attributes, since the magic cookie attributes turn into ASCII
10394 # control characters, and the half-intensity ("protected") attribute
10395 # converts all affected characters to spaces.
10397 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
10400 # This uses half-intensity mode (<dim>) for standout (<smso>), and
10401 # exposes no other attributes (half-intensity is the only attribute
10402 # that does not generate a magic cookie.)
10404 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
10406 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
10409 # Full magic-cookie attribute support, with half-intensity reverse
10410 # video for standout. Note that we add a space in the <dim> sequence
10411 # to give a consistent magic-cookie count. Also note that <sgr> uses
10412 # backspacing (in the TVI-supported order) to apply all requested
10413 # attributes with only a single magic cookie.
10415 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
10417 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
10419 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
10420 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
10421 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
10423 # This uses the second page memory option to save & restore screen
10424 # contents. If your terminal is missing the option, this description
10425 # should still work, but that has not been tested.
10427 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
10428 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
10429 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
10431 # This simulates flashing by briefly toggling to the other page
10434 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
10435 bel=\EK$<100>\EK, use=tvi912b+2p,
10437 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
10439 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
10440 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
10441 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
10442 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
10443 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10444 kf8=^AG\r, kf9=^AH\r,
10446 # Combinations of the basic building blocks
10448 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
10449 use=tvi912b+2p, use=tvi912b-unk,
10451 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
10452 use=tvi912b+vb, use=tvi912b-unk,
10454 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
10455 use=tvi912b+printer, use=tvi912b-unk,
10457 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
10458 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
10460 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
10461 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
10463 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
10464 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
10466 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
10467 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
10469 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
10470 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
10472 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
10473 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
10475 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
10476 use=tvi912b+dim, use=tvi912b-unk,
10478 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
10479 use=tvi912b+mc, use=tvi912b-unk,
10481 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
10482 use=tvi920b+fn, use=tvi912b-unk,
10484 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
10485 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
10487 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
10488 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
10490 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
10491 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
10493 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
10494 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
10497 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
10498 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
10501 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
10502 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
10505 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
10506 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
10509 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
10510 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
10513 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
10514 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
10517 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
10518 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
10520 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
10521 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
10523 # Televideo 921 and variants
10524 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
10525 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
10526 # also added empty <acsc> to suppress tic warning -- esr)
10527 tvi921|televideo model 921 with sysline same as page & real vi function,
10528 OTbs, OTpt, am, hs, xenl, xhp,
10529 cols#80, lines#24, xmc#0,
10530 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10531 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10532 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10533 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
10534 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
10535 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
10536 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
10537 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
10538 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
10539 # without the beeper
10540 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
10541 # also added empty <acsc> to suppress tic warning -- esr)
10542 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
10544 cols#80, lines#24, xmc#0,
10545 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10546 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10547 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10548 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
10549 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10550 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
10551 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10552 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
10553 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
10554 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
10555 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
10556 dl1=\ER$<2*/>, il1=\EE$<2*/>,
10557 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
10558 kil1=\EE$<2*/>, use=tvi92B,
10560 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
10561 # in from a BSD termcap file because it looks like they do something the
10562 # old ones skip -- esr)
10563 tvi924|televideo tvi924,
10564 am, bw, hs, in, mir, msgr, xenl, xon,
10565 cols#80, it#8, lines#24, wsl#80, xmc#0,
10566 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
10567 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
10568 cub1=^H, cud1=^V, cuf1=^L,
10569 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
10570 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
10571 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
10572 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10573 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
10574 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10575 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
10576 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
10577 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
10578 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
10579 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
10580 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
10581 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
10584 # TVI925 DIP switches. In each of these, D = Down and U = Up,
10586 # Here are the settings for the external (baud) switches (S1):
10589 # 7 8 9 10 [Printer]
10590 # 1 2 3 4 [Main RS232]
10591 # -----------------------------------------------------
10610 # Settings for word length and stop-bits (S1)
10612 # Position Description
10614 # ---------------------------
10621 # S2 (external) settings
10623 # Position Up Dn Description
10624 # --------------------------------------------
10626 # X Duplex edit (transmit editing keys)
10627 # --------------------------------------------
10628 # 2 X 912/920 emulation
10630 # --------------------------------------------
10634 # --------------------------------------------
10638 # --------------------------------------------
10642 # --------------------------------------------
10646 # --------------------------------------------
10650 # --------------------------------------------
10651 # 6 X White on black display
10652 # X Black on white display
10653 # --------------------------------------------
10656 # --------------------------------------------
10659 # --------------------------------------------
10662 # --------------------------------------------
10665 # --------------------------------------------
10666 # 10 X CR/LF (Auto LF)
10669 # S3 (internal switch) settings:
10671 # Position Up Dn Description
10672 # --------------------------------------------
10675 # --------------------------------------------
10678 # --------------------------------------------
10681 # --------------------------------------------
10684 # --------------------------------------------
10687 # --------------------------------------------
10688 # 4 X Blinking block cursor
10690 # --------------------------------------------
10691 # 4 X Blinking underline cursor
10693 # --------------------------------------------
10694 # 4 X Steady block cursor
10696 # --------------------------------------------
10697 # 4 X Steady underline cursor
10699 # --------------------------------------------
10700 # 6 X Screen blanking timer (ON)
10701 # X Screen blanking timer (OFF)
10702 # --------------------------------------------
10703 # 7 X Page attributes
10704 # X Line attributes
10705 # --------------------------------------------
10706 # 8 X DCD disconnected
10708 # --------------------------------------------
10709 # 9 X DSR disconnected
10711 # --------------------------------------------
10712 # 10 X DTR Disconnected
10714 # --------------------------------------------
10716 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
10717 tvi925|televideo 925,
10718 OTbs, am, bw, hs, ul,
10719 cols#80, lines#24, xmc#1,
10720 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
10721 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10722 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
10723 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
10724 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
10725 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10726 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10727 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10728 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
10729 tsl=\Eh\Ef, use=adm+sgr,
10730 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
10731 # to avoid "magic cookie" standout glitch:
10732 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
10734 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
10736 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
10737 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
10738 # for additional capabilities,
10739 # The following tvi descriptions from B:pjphar and virus!mike
10740 # is for all 950s. It sets the following attributes:
10741 # full duplex (\EDF) write protect off (\E()
10742 # conversation mode (\EC) graphics mode off (\E%)
10743 # white on black (\Ed) auto page flip off (\Ew)
10744 # turn off status line (\Eg) clear status line (\Ef\r)
10745 # normal video (\E0) monitor mode off (\EX or \Eu)
10746 # edit mode (\Er) load blank char to space (\Ee\040)
10747 # line edit mode (\EO) enable buffer control (^O)
10748 # protect mode off (\E\047) duplex edit keys (\El)
10749 # program unshifted send key to send line all (\E016)
10750 # program shifted send key to send line unprotected (\E004)
10751 # set the following to nulls:
10752 # field delimiter (\Ex0\200\200)
10753 # line delimiter (\Ex1\200\200)
10754 # start-protected field delimiter (\Ex2\200\200)
10755 # end-protected field delimiter (\Ex3\200\200)
10756 # set end of text delimiter to carriage return/null (\Ex4\r\200)
10758 # TVI 950 Switch Setting Reference Charts
10762 # S1 1 2 3 4 5 6 7 8 9 10
10763 # +-----------------------+-----+-----+-----------------------+
10764 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
10765 # | |Bits |Bits | |
10766 # +------+-----------------------+-----+-----+-----------------------+
10767 # | Up | See | 7 | 2 | See |
10768 # +------+-----------------------+-----+-----+-----------------------+
10769 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
10770 # +------+-----------------------+-----+-----+-----------------------+
10773 # S2 1 2 3 4 5 6 7 8 9 10
10774 # +-----+-----+-----------------+-----+-----------+-----+-----+
10775 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
10776 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10777 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
10778 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10779 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
10780 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10784 # +-----------+-----+-----+-----+-----+-----------+
10785 # | Display | 1 | 2 | 3 | 4 | Baud |
10786 # +-----------+-----+-----+-----+-----+ |
10787 # | Printer | 7 | 8 | 9 | 10 | Rate |
10788 # +-----------+-----+-----+-----+-----+-----------+
10789 # | D | D | D | D | 9600 |
10790 # | U | D | D | D | 50 |
10791 # | D | U | D | D | 75 |
10792 # | U | U | D | D | 110 |
10793 # | D | D | U | D | 135 |
10794 # | U | D | U | D | 150 |
10795 # | D | U | U | D | 300 |
10796 # | U | U | U | D | 600 |
10797 # | D | D | D | U | 1200 |
10798 # | U | D | D | U | 1800 |
10799 # | D | U | D | U | 2400 |
10800 # | U | U | D | U | 3600 |
10801 # | D | D | U | U | 4800 |
10802 # | U | D | U | U | 7200 |
10803 # | D | U | U | U | 9600 |
10804 # | U | U | U | U | 19200 |
10805 # +-----+-----+-----+-----+-----------+
10808 # +-----+-----+-----+-----------+
10809 # | 3 | 4 | 5 | Parity |
10810 # +-----+-----+-----+-----------+
10811 # | X | X | D | None |
10812 # | D | D | U | Odd |
10813 # | D | U | U | Even |
10814 # | U | D | U | Mark |
10815 # | U | U | U | Space |
10816 # +-----+-----+-----+-----------+
10820 # +-----+-----+-----------------+
10821 # | 7 | 8 | Communication |
10822 # +-----+-----+-----------------+
10823 # | D | D | Half Duplex |
10824 # | D | U | Full Duplex |
10825 # | U | D | Block |
10826 # | U | U | Local |
10827 # +-----+-----+-----------------+
10829 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
10830 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
10831 # should be present and all tvi native modes use the same string for this.
10832 # Finally, note that BSD has cud1=^V. -- esr)
10834 # TVI 950 has 11 function-keys -TD
10835 tvi950|televideo 950,
10836 OTbs, am, hs, mir, msgr, xenl, xon,
10837 cols#80, it#8, lines#24, xmc#1,
10838 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
10839 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10840 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10841 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
10842 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
10844 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10845 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10847 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
10848 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
10849 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10850 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
10851 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
10852 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
10853 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
10854 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
10855 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
10857 # is for 950 with two pages adds the following:
10858 # set 48 line page (\E\\2)
10859 # place cursor at page 0, line 24, column 1 (\E-07 )
10860 # set local (no send) edit keys (\Ek)
10862 # two page 950 adds the following:
10863 # when entering ex, set 24 line page (\E\\1)
10864 # when exiting ex, reset 48 line page (\E\\2)
10865 # place cursor at 0,24,1 (\E-07 )
10866 # set duplex (send) edit keys (\El) when entering vi
10867 # set local (no send) edit keys (\Ek) when exiting vi
10869 tvi950-2p|televideo950 w/2 pages,
10870 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10871 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10873 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10874 smkx=\El, use=tvi950,
10876 # is for 950 with four pages adds the following:
10877 # set 96 line page (\E\\3)
10878 # place cursor at page 0, line 24, column 1 (\E-07 )
10880 # four page 950 adds the following:
10881 # when entering ex, set 24 line page (\E\\1)
10882 # when exiting ex, reset 96 line page (\E\\3)
10883 # place cursor at 0,24,1 (\E-07 )
10885 tvi950-4p|televideo950 w/4 pages,
10886 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10887 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10889 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10890 smkx=\El, use=tvi950,
10892 # <is2> for reverse video 950 changes the following:
10893 # set reverse video (\Ed)
10895 # set vb accordingly (\Ed ...delay... \Eb)
10897 tvi950-rv|televideo950 rev video,
10898 flash=\Ed$<200/>\Eb,
10899 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10900 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
10904 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
10905 tvi950-rv-2p|televideo950 rev video w/2 pages,
10906 flash=\Ed$<200/>\Eb,
10907 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10908 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10910 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10911 smkx=\El, use=tvi950,
10913 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
10914 tvi950-rv-4p|televideo950 rev video w/4 pages,
10915 flash=\Ed$<200/>\Eb,
10916 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10917 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10919 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10920 smkx=\El, use=tvi950,
10921 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
10922 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
10923 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
10924 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
10925 # the :ko: string had :cl: in it, which means that one of the original
10926 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
10927 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
10928 # ko implies -- esr)
10929 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
10931 tvi955|televideo 955,
10934 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
10935 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
10936 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
10937 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
10938 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
10939 rmam=\E[=7l, rmxon=^N,
10940 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
10942 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
10944 tvi955-w|955-w|televideo955 w/132 cols,
10946 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
10947 # use half-intensity as normal mode, full intensity as <bold>
10948 tvi955-hb|955-hb|televideo955 half-bright,
10949 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
10950 sgr0=\EG0\E[=5h, use=tvi955,
10951 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
10952 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
10953 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
10954 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
10955 # it does to the function keys. I deduced <rmam>/<smam>.
10956 # also added empty <acsc> to suppress tic warning, -- esr)
10957 tvi970|televideo 970,
10958 OTbs, OTpt, am, da, db, mir, msgr,
10959 cols#80, it#8, lines#24,
10960 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
10961 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
10962 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
10963 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
10964 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
10965 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
10966 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10967 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
10968 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
10969 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
10970 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
10971 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
10972 smul=\E[4m, vpa=\E[%i%p1%dd,
10973 tvi970-vb|televideo 970 with visual bell,
10974 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
10976 tvi970-2p|televideo 970 with using 2 pages of memory,
10977 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
10979 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
10980 # per line (rather than 40), Esc K chooses the normal character set. Not sure
10981 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
10982 # <smul> strings are klutzy, but at least use no screen space.
10983 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
10984 # its absence means <smam>=\Ev isn't safe to use. -- esr)
10985 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
10986 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
10987 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
10988 tvipt|televideo personal terminal,
10991 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
10992 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
10993 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
10994 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
10995 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
10996 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
10997 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
10998 tvi9065|televideo 9065,
10999 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
11000 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
11002 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
11003 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
11004 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
11005 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
11006 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
11007 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
11008 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
11009 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
11010 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
11011 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
11012 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
11013 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
11014 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
11015 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
11016 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11017 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
11018 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
11019 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
11020 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
11021 pfx=\E|%p1%{48}%+%c1%p2%s\031,
11022 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
11023 rep=\E[%p2%db%p1%c, rev=\EG4,
11024 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
11025 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
11026 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
11027 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
11028 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
11029 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
11030 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
11031 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
11032 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
11034 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
11035 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
11037 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
11038 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
11039 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index,
11043 # In September 1993, Visual Technology of Westboro, Massachusetts,
11044 # merged with White Pine Software of Nashua, New Hampshire.
11046 # White Pine Software may be contacted at +1 603/886-9050.
11047 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
11050 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
11051 # Recently I hacked together the following termcap for Visual
11052 # Technology's Visual 50 terminal. It's a slight modification of
11053 # the vt52 termcap.
11054 # It's intended to run when the Visual 50 is in vt52 emulation mode
11055 # (I know what you're thinking; if it's emulating a vt52, then why
11056 # another termcap? Well, it turns out that the Visual 50 can handle
11057 # <dl1> and db(?) among other things, which the vt52 can't)
11058 # The termcap works OK for the most part. The only problem is on
11059 # character inserts. The whole line gets painfully redrawn for each
11060 # character typed. Any suggestions?
11061 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
11062 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
11063 # disguise; <kf7>-<kf9> are really l1-l3.
11065 OTbs, OTpt, am, da, db, msgr,
11066 cols#80, it#8, lines#24,
11067 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
11068 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11069 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
11070 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
11071 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
11072 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
11073 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
11074 # this one was BSD & SCO's vi50
11075 vi50adm|visual 50 in adm3a mode,
11077 cols#80, it#8, lines#24,
11078 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11079 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
11080 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
11081 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
11082 rmso=\ET, smso=\EU,
11083 # From: Jeff Siegal <jbs@quiotix.com>
11085 OTbs, am, mir, msgr,
11086 cols#80, it#8, lines#24,
11087 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
11088 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11089 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
11090 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
11091 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
11092 smir=\Ea, smso=\EU,
11094 # Visual 200 from BRL
11095 # The following switch settings are assumed for normal operation:
11096 # FULL_DUPLEX SCROLL CR
11097 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
11098 # Other switches may be set for operator convenience or communication
11100 # Character insertion is kludged in order to get around the "beep" misfeature.
11101 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
11102 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
11103 # and <dl1> strings, but we seem to get along fine without them.
11105 OTbs, OTpt, am, mir, msgr,
11106 OTkn#10, cols#80, it#8, lines#24,
11107 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
11108 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
11109 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
11110 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
11111 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
11112 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11113 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
11114 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
11115 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
11116 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
11117 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
11118 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
11119 # The older Visuals didn't come with function keys. This entry uses
11120 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
11121 # If your version of vi doesn't support function keys you may want
11123 vi200-f|visual 200 no function keys,
11124 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
11125 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
11126 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
11128 vi200-rv|visual 200 reverse video,
11129 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
11131 # the function keys are programmable but we don't reprogram them to their
11132 # default values with <is2> because programming them is very verbose. maybe
11133 # an initialization file should be made for the 300 and they could be stuck
11135 # (vi300: added <rmam>/<smam> based on init string -- esr)
11136 vi300|visual 300 ansi x3.64,
11139 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
11140 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
11141 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
11143 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
11144 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11145 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
11146 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
11147 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
11148 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
11149 smso=\E[1m, smul=\E[4m,
11150 # some of the vi300s have older firmware that has the command
11151 # sequence for setting editing extent reversed.
11152 vi300-old|visual 300 with old firmware (set edit extent reversed),
11153 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
11155 # Visual 500 prototype entry from University of Wisconsin.
11156 # The best place to look for the escape sequences is page A1-1 of the
11157 # Visual 500 manual. The initialization sequence given here may be
11158 # overkill, but it does leave out some of the initializations which can
11159 # be done with the menus in set-up mode.
11160 # The :xp: line below is so that emacs can understand the padding requirements
11161 # of this slow terminal. :xp: is 10 time the padding factor.
11162 # (vi500: removed unknown :xp#4: termcap;
11163 # also added empty <acsc> to suppress tic warning -- esr)
11166 cols#80, it#8, lines#33,
11167 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
11168 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
11169 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11170 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
11171 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
11173 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
11174 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11175 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
11176 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
11178 # The visual 550 is a visual 300 with tektronix graphics,
11179 # and with 33 lines. clear screen is modified here to
11180 # also clear the graphics.
11181 vi550|visual 550 ansi x3.64,
11183 clear=\030\E[H\E[2J, use=vi300,
11185 vi603|visual603|visual 603,
11187 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
11188 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
11189 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
11190 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
11191 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
11192 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
11193 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11194 tsl=\EP2~, use=vt100+4bsd,
11199 # 3471 North First Street
11200 # San Jose, CA 95134
11201 # Vox: (408)-473-1200
11202 # Fax: (408) 473-1222
11203 # Web: http://www.wyse.com
11205 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
11206 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
11207 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
11208 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
11211 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
11212 # They now own the Qume and Amdek brands, too. So these are the people to
11213 # talk with about all Link, Qume, and Amdek terminals.
11215 # These entries include a few small fixes.
11216 # I canceled the bel capacities in the vb entries.
11217 # I made two trivial syntax fixes in the wyse30 entry.
11218 # I made some entries relative to adm+sgr.
11221 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
11223 # Although the Wyse 30 can support more than one attribute
11224 # it requires magic cookies to do so. Many applications do not
11225 # function well with magic cookies. The following terminfo uses
11226 # the protect mode to support one attribute (dim) without cookies.
11227 # If more than one attribute is needed then the wy30-mc terminfo
11230 wy30|wyse30|Wyse 30,
11231 am, bw, hs, mc5i, mir, msgr, xon,
11232 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
11233 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
11234 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
11235 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
11236 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
11237 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
11238 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
11239 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
11240 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
11241 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
11242 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11243 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
11244 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
11245 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
11246 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
11247 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
11248 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11249 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
11250 smso=\E`7\E), tbc=\E0, tsl=\EF,
11252 # This terminal description uses the non-hidden attribute mode
11253 # (with magic cookie).
11255 # (wy30-mc: added <smcup> to suppress tic warning --esr)
11256 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
11259 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
11260 rmcup=\EG0, rmso=\EG0,
11261 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
11262 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
11263 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11264 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
11265 smso=\EG4, use=wy30, use=adm+sgr,
11266 # The mandatory pause used by <flash> does not work with
11267 # older versions of terminfo. If you see this effect then
11268 # unset xon and delete the / from the delay.
11269 # i.e. change $<100/> to $<100>
11270 wy30-vb|wyse30-vb|wyse 30 visible bell,
11273 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
11274 # Normal) without magic cookies by using the protect mode.
11275 # The following description uses this feature, but when more
11276 # than one attribute is put on the screen at once, all attributes
11277 # will be changed to be the same as the last attribute given.
11278 # The Wyse 50 can support more attributes when used with magic
11279 # cookies. The wy50-mc terminal description uses magic cookies
11280 # to correctly handle multiple attributes on a screen.
11282 wy50|wyse50|Wyse 50,
11283 am, bw, hs, mc5i, mir, msgr, xon,
11284 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
11285 acsc=a;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, cbt=\EI,
11286 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
11287 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
11288 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
11289 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
11290 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
11291 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
11292 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
11293 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
11294 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
11295 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11296 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11297 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
11298 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
11299 pfx=\Ez%p1%{63}%+%c%p2%s\177,
11300 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
11301 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
11302 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
11304 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
11305 smso=\E`6\E), tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r,
11306 kF11=^Aj\r, kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r,
11307 kF16=^Ao\r, kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r,
11308 kF6=^Ae\r, kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r,
11310 # This terminal description uses the non-hidden attribute mode
11311 # (with magic cookie).
11313 # The mandatory pause used by flash does not work with some
11314 # older versions of terminfo. If you see this effect then
11315 # unset <xon> and delete the / from the delay.
11316 # i.e. change $<100/> to $<100>
11317 # (wy50-mc: added <smcup> to suppress tic warning --esr)
11318 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
11321 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
11322 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
11323 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
11324 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
11325 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
11326 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
11327 smso=\EGt, use=wy50, use=adm+sgr,
11328 wy50-vb|wyse50-vb|wyse 50 visible bell,
11330 wy50-w|wyse50-w|wyse 50 132-column,
11331 cols#132, lw#7, nlab#16, wsl#97,
11332 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
11334 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
11338 # The Wyse 350 is a Wyse 50 with color.
11339 # Unfortunately this means that it has magic cookies.
11340 # The color attributes are designed to overlap the reverse, dim and
11341 # underline attributes. This is nice for monochrome applications
11342 # because you can make underline stuff green (or any other color)
11343 # but for true color applications it's not so hot because you cannot
11344 # mix color with reverse, dim or underline.
11345 # To further complicate things one of the attributes must be
11346 # black (either the foreground or the background). In reverse video
11347 # the background changes color with black letters. In normal video
11348 # the foreground changes colors on a black background.
11349 # This terminfo uses some of the more advanced features of curses
11350 # to display both color and blink. In the final analysis I am not
11351 # sure that the wy350 runs better with this terminfo than it does
11352 # with the wy50 terminfo (with user adjusted colors).
11354 # The mandatory pause used by flash does not work with
11355 # older versions of terminfo. If you see this effect then
11356 # unset xon and delete the / from the delay.
11357 # i.e. change $<100/> to $<100>
11359 # Bug: The <op> capability resets attributes.
11360 wy350|wyse350|Wyse 350,
11361 am, bw, hs, mc5i, mir, xon,
11362 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
11364 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
11365 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
11366 cub1=^H, cud1=\n, cuf1=^L,
11367 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
11368 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
11369 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11370 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
11371 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
11372 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11373 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
11374 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
11375 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11376 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11377 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
11378 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
11379 pfx=\Ez%p1%{63}%+%c%p2%s\177,
11380 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
11381 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
11382 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
11383 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
11384 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
11386 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
11387 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
11388 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
11390 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
11391 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
11392 wy350-vb|wyse350-vb|wyse 350 visible bell,
11394 wy350-w|wyse350-w|wyse 350 132-column,
11395 cols#132, lw#7, nlab#16, wsl#97,
11396 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
11398 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
11401 # This terminfo description is untested.
11402 # The wyse100 emulates an adm31, so the adm31 entry should work.
11406 cols#80, lines#24, xmc#1,
11407 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11409 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
11410 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11411 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11412 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
11413 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
11415 # The Wyse 120/150 has most of the features of the Wyse 60.
11416 # This terminal does not need padding up to 9600 baud!
11417 # <msgr> should be set but the clear screen fails when in
11418 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11421 wy120|wyse120|wy150|wyse150|Wyse 120/150,
11422 am, bw, hs, km, mc5i, mir, msgr, xon,
11423 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11424 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11425 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11426 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11427 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11428 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11429 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
11430 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11431 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11433 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11434 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11435 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11436 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11437 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11438 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11439 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11440 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
11441 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11442 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11443 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11444 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
11445 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11446 rs3=\EwG\Ee($<100>,
11447 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11448 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11449 %{64}%|%;%?%p7%t%{1}%|%;%c,
11450 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11451 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11452 tbc=\E0, tsl=\EF, use=adm+sgr,
11454 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
11455 cols#132, lw#7, nlab#16, wsl#97,
11456 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11457 rs2=\E`;$<70>, use=wy120,
11459 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
11460 lh@, lines#25, lw@, nlab@,
11461 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
11463 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
11464 lh@, lines#25, lw@, nlab@,
11465 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
11467 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
11470 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
11473 # The Wyse 60 is like the Wyse 50 but with more padding.
11474 # The reset strings are slow and the pad times very depending
11475 # on other parameters such as font loading. I have tried
11476 # to follow the following outline:
11478 # <rs1> -> set personality
11479 # <rs2> -> set number of columns
11480 # <rs3> -> set number of lines
11481 # <is1> -> select the proper font
11482 # <is2> -> do the initialization
11483 # <is3> -> set up display memory (2 pages)
11485 # The Wyse 60's that have vt100 emulation are slower than the
11486 # older Wyse 60's. This change happened mid-1987.
11487 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
11489 # The meta key is only half right. This terminal will return the
11490 # high order bit set when you hit CTRL-function_key
11492 # It may be useful to assign two function keys with the
11493 # values \E=(\s look at old data in page 1
11494 # \E=W, look at bottom of page 1
11495 # where \s is a space ( ).
11498 # The Wyse 60 runs faster when the XON/XOFF
11499 # handshake is turned off.
11501 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
11502 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11503 wy60|wyse60|Wyse 60,
11504 am, bw, hs, km, mc5i, mir, msgr,
11505 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
11506 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11507 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
11508 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11509 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11510 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
11511 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
11512 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
11513 ip=$<3>, is1=\EcB0\EcC1,
11514 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11516 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11517 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11518 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11519 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11520 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11521 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11522 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11523 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
11524 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11525 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11526 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
11527 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
11528 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
11529 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
11530 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11531 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11532 %{64}%|%;%?%p7%t%{1}%|%;%c,
11533 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11534 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11535 tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
11536 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
11537 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
11538 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11540 wy60-w|wyse60-w|wyse 60 132-column,
11541 cols#132, lw#7, nlab#16, wsl#97,
11542 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
11543 rs2=\EeF$<150>\E`;$<150>, use=wy60,
11545 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
11546 lh@, lines#25, lw@, nlab@,
11547 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
11548 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
11549 lh@, lines#25, lw@, nlab@,
11550 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
11552 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
11554 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
11555 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
11556 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
11557 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
11558 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
11559 cols#132, lw#7, nlab#16, wsl#97,
11560 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11561 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
11562 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
11564 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
11565 lh@, lines#43, lw@, nlab@,
11566 pln@, rs3=\Ee+$<150>, use=wy60-42,
11567 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
11568 lh@, lines#43, lw@, nlab@,
11569 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
11571 wy60-vb|wyse60-vb|Wyse 60 visible bell,
11573 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
11576 # The Wyse-99GT looks at lot like the Wyse 60 except that it
11577 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
11578 # setup parameter controls the number of lines on the screen.
11579 # For the Wyse 99GT the "lines" setup parameter controls the
11580 # number of lines in a page. The screen can display 25 lines max.
11581 # The Wyse-99GT also has personalities for the VT220 and
11582 # Tektronix 4014. But this has no bearing on the native mode.
11584 # (msgr) should be set but the clear screen fails when in
11585 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11586 # then set msgr, else use msgr@.
11588 # u0 -> enter Tektronix mode
11589 # u1 -> exit Tektronix mode
11591 wy99gt|wyse99gt|Wyse 99gt,
11593 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
11594 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
11595 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
11596 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
11597 u0=\E~>\E8, u1=\E[42h, use=wy60,
11599 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
11600 cols#132, lw#7, nlab#16, wsl#97,
11601 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11602 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
11605 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
11606 lh@, lines#25, lw@, nlab@,
11607 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
11609 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
11610 lh@, lines#25, lw@, nlab@,
11611 pln@, rs2=\E`;$<150>, use=wy99gt-w,
11613 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
11616 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
11617 bel@, use=wy99gt-w,
11619 # Can't set tabs! Other bugs (ANSI mode only):
11620 # - can't redefine function keys (anyway, key redefinition in ANSI mode
11621 # is too much complex to be described);
11622 # - meta key can't be described (the terminal forgets it when reset);
11623 # The xon-xoff handshaking can't be disabled while in ansi personality, so
11624 # emacs can't work at speed greater than 9600 baud. No padding is needed at
11626 # dch1 has been commented out because it causes annoying glittering when
11627 # vi deletes one character at the beginning of a line with tabs in it.
11628 # dch makes sysgen(1M) have a horrible behaviour when deleting
11629 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
11630 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
11631 # not, so smir and rmir are commented out as well.
11632 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11633 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
11634 am, km, mc5i, mir, msgr, xenl,
11635 cols#80, it#8, lines#25, vt#3,
11636 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
11637 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11638 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
11639 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
11640 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
11641 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
11642 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
11643 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
11644 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
11645 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
11646 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
11647 il1=\E[L, ind=\n$<1>, invis=\E[8m,
11648 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
11649 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
11650 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11651 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
11652 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
11653 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
11654 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
11655 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
11656 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
11657 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11658 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
11659 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
11660 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
11663 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
11664 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
11665 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
11666 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
11668 # This is the american terminal. Here tabs work fine.
11669 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11670 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
11671 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
11673 # This terminal (firmware version 02) has a lot of bugs:
11674 # - can't set tabs;
11675 # - other bugs in ANSI modes (see above).
11676 # This description disables handshaking when using cup. This is because
11677 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
11678 # cannot be used at speeds greater than 9600 baud, because at greater
11679 # speeds handshaking is needed even for character sending. If you use
11680 # DTR handshaking, you can use even greater speeds.
11681 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11682 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
11683 am, bw, hs, km, mc5i, mir, msgr, xon,
11684 cols#80, it#8, lines#25, wsl#46,
11685 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
11686 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
11687 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
11688 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11689 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
11690 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
11691 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
11692 ind=\n, invis=\EG3,
11693 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
11694 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
11696 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
11697 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
11698 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
11699 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
11700 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
11701 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11702 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
11703 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
11704 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
11705 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
11706 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
11707 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
11708 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
11709 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
11711 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
11712 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
11714 # This is the american terminal. Here tabs work.
11715 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11716 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
11717 hts=\E1, tbc=\E0, use=wy99f,
11720 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
11721 # The reset strings are slow and the pad times very depending
11722 # on other parameters such as font loading. I have tried
11723 # to follow the following outline:
11725 # <rs1> -> set personality
11726 # <rs2> -> set number of columns
11727 # <rs3> -> set number of lines
11728 # <is1> -> select the proper font
11729 # <is2> -> do the initialization
11730 # <is3> -> set up display memory (2 pages)
11732 # The display memory may be used for either text or graphics.
11733 # When "Display Memory = Shared" the terminal will have more pages
11734 # but garbage may be left on the screen when you switch from
11735 # graphics to text. If "Display Memory = Unshared" then the
11736 # text area will be only one page long.
11738 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
11739 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11740 wy160|wyse160|Wyse 160,
11741 am, bw, hs, km, mc5i, mir, msgr,
11742 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
11743 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11744 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
11745 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11746 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
11747 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
11748 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
11749 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
11750 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11752 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11753 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11754 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11755 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11756 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11757 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11758 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11759 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
11760 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11761 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11762 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
11763 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
11764 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
11765 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
11766 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11767 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11768 %{64}%|%;%?%p7%t%{1}%|%;%c,
11769 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11770 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11771 tbc=\E0, tsl=\EF, use=adm+sgr,
11773 wy160-w|wyse160-w|wyse 160 132-column,
11774 cols#132, lw#7, nlab#16, wsl#90,
11775 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
11776 rs2=\EeF$<150>\E`;$<150>, use=wy160,
11778 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
11779 lh@, lines#25, lw@, nlab@,
11780 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
11781 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
11782 lh@, lines#25, lw@, nlab@,
11783 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
11785 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
11787 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
11788 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
11789 rs3=\Ee*$<150>, use=wy160,
11790 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
11791 cols#132, lw#7, nlab#16, wsl#90,
11792 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
11793 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
11795 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
11796 lh@, lines#43, lw@, nlab@,
11797 pln@, rs3=\Ee+$<150>, use=wy160-42,
11798 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
11799 lh@, lines#43, lw@, nlab@,
11800 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
11802 wy160-vb|wyse160-vb|Wyse 160 visible bell,
11804 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
11807 # The Wyse 75 is a vt100 lookalike without advanced video.
11809 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
11810 # Underline) without magic cookies. The following description
11811 # uses this capability, but when more than one attribute is
11812 # put on the screen at once, all attributes will be changed
11813 # to be the same as the last attribute given.
11814 # The Wyse 75 can support more attributes when used with magic
11815 # cookies. The wy75-mc terminal description uses magic cookies
11816 # to correctly handle multiple attributes on a screen.
11818 wy75|wyse75|wyse 75,
11819 am, hs, mc5i, mir, msgr, xenl, xon,
11820 cols#80, lines#24, ma#1, pb#1201, wsl#78,
11821 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11822 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
11823 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
11824 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
11825 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11826 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
11827 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
11828 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
11829 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
11830 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
11831 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11832 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11833 ind=\n$<2>, ip=$<1>,
11834 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
11835 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
11836 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
11837 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11838 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11839 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
11840 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
11841 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11842 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
11843 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
11844 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
11845 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
11846 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
11848 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
11849 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
11851 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11852 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
11853 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
11855 # This terminal description uses the non-hidden attribute mode
11856 # (with magic cookie).
11858 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
11861 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
11862 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
11863 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
11864 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
11866 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
11868 wy75-vb|wyse75-vb|wyse 75 with visible bell,
11871 wy75-w|wyse75-w|wyse 75 in 132 column mode,
11873 rs2=\E[35h\E[?3h$<80>, use=wy75,
11874 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
11878 # Wyse 85 emulating a vt220 7 bit mode.
11879 # 24 line screen with status line.
11881 # The vt220 mode permits more function keys but it wipes out
11882 # the escape key. I strongly recommend that <f11> be set to
11884 # The terminal may have to be set for 8 data bits and 2 stop
11885 # bits for the arrow keys to work.
11886 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
11887 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
11888 # <dch> leave trash on the screen when used without XON/XOFF.
11890 wy85|wyse85|wyse 85,
11891 am, hs, mc5i, mir, msgr, xenl, xon,
11892 cols#80, it#8, lines#24, wsl#80,
11893 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11894 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11895 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11896 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11897 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11898 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11899 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11900 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11901 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11902 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11903 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11904 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11905 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11906 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11907 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11908 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
11909 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
11910 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
11911 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
11912 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
11913 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
11914 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11915 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11916 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11917 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11918 rs3=\E[?5l, sc=\E7,
11919 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11920 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11921 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11922 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11923 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
11925 # Wyse 85 with visual bell.
11926 wy85-vb|wyse85-vb|wyse 85 with visible bell,
11927 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
11929 # Wyse 85 in 132-column mode.
11930 wy85-w|wyse85-w|wyse 85 in 132-column mode,
11932 rs2=\E[35h$<70/>\E[?3h, use=wy85,
11934 # Wyse 85 in 132-column mode with visual bell.
11935 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
11938 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
11939 # This copes with an apparent firmware bug in the wy85. He writes:
11940 # "What I did was change leave the terminal cursor keys set to Normal
11941 # (instead of application), and change \E[ to \233 for all the keys in
11942 # terminfo. At one point, I found some reference indicating that this
11943 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
11944 # me), but I can't find that and the server under my bookmark to "Wyse
11945 # Technical" isn't responding. So there's the question of whether the wy85
11946 # terminfo should reflect the manufacturer's intended behaviour of the terminal
11948 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
11949 am, hs, mc5i, mir, msgr, xenl, xon,
11950 cols#80, it#8, lines#24, wsl#80,
11951 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11952 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11953 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11954 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11955 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11956 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11957 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11958 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11959 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11960 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11961 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11962 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11963 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11964 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11965 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
11966 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
11967 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
11968 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
11969 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
11970 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
11971 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
11972 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
11973 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
11974 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11975 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11976 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11977 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11978 rs3=\E[?5l, sc=\E7,
11979 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11980 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
11981 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11982 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11983 tsl=\E[40h\E7\E[25;%i%p1%dH,
11985 # Wyse 185 emulating a vt320 7 bit mode.
11987 # This terminal always displays 25 lines. These lines may be used
11988 # as 24 data lines and a terminal status line (top or bottom) or
11989 # 25 data lines. The 48 and 50 line modes change the page size
11990 # and not the number of lines on the screen.
11992 # The Compose Character key can be used as a meta key if changed
11995 wy185|wyse185|wyse 185,
11996 am, hs, km, mc5i, mir, msgr, xenl, xon,
11997 cols#80, it#8, lines#24, wsl#80,
11998 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11999 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12000 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12001 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12002 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12003 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12004 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
12005 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12006 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
12007 el=\E[K, el1=\E[1K, enacs=\E)0,
12008 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
12009 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
12010 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
12011 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12012 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
12013 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12014 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
12015 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12016 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
12017 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
12018 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12019 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
12020 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
12021 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12022 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
12023 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
12024 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12025 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12026 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12027 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12028 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
12029 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
12030 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
12033 # Wyse 185 with 24 data lines and top status (terminal status)
12034 wy185-24|wyse185-24|wyse 185 with 24 data lines,
12036 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12039 # Wyse 185 with visual bell.
12040 wy185-vb|wyse185-vb|wyse 185+flash,
12043 # Wyse 185 in 132-column mode.
12044 wy185-w|wyse185-w|wyse 185 in 132-column mode,
12046 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12047 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
12049 # Wyse 185 in 132-column mode with visual bell.
12050 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
12053 # wy325 terminfo entries
12054 # Done by Joe H. Davis 3-9-92
12056 # lines 25 columns 80
12058 wy325|wyse325|Wyse epc,
12059 am, bw, hs, mc5i, mir,
12060 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
12061 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
12062 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
12063 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
12064 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
12065 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
12066 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
12067 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
12068 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
12070 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
12071 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
12072 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12073 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12074 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
12075 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
12076 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
12077 mc0=\EP, mc4=^T, mc5=\Ed#,
12078 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
12079 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
12080 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
12081 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
12082 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
12083 rs3=\EwG\Ee($<100>,
12084 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
12085 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
12086 %{64}%|%;%?%p7%t%{1}%|%;%c,
12087 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
12088 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
12089 tsl=\EF, use=adm+sgr,
12092 # lines 24 columns 80 vb
12094 wy325-vb|wyse325-vb|wyse-325 with visual bell,
12098 # lines 24 columns 132
12100 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
12101 cols#132, lw#7, nlab#16, wsl#97,
12102 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
12103 rs2=\E`;$<70>, use=wy325,
12105 # lines 25 columns 80
12107 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
12108 lh@, lines#25, lw@, nlab@,
12109 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
12111 # lines 25 columns 132
12113 wy325-25w|wyse325-25w|wy325 132 columns,
12114 lh@, lines#25, lw@, nlab@,
12115 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12117 # lines 25 columns 132 vb
12119 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
12123 # lines 42 columns 80
12125 wy325-42|wyse325-42|wyse-325 42 lines,
12126 lh@, lines#42, lw@, nlab@,
12127 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
12129 # lines 42 columns 132
12131 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
12132 lh@, lines#42, lw@, nlab@,
12133 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12135 # lines 42 columns 132 vb
12137 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
12140 # lines 43 columns 80
12142 wy325-43|wyse325-43|wyse-325 43 lines,
12143 lh@, lines#43, lw@, nlab@,
12146 # lines 43 columns 132
12148 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
12149 lh@, lines#43, lw@, nlab@,
12150 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
12152 # lines 43 columns 132 vb
12154 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
12157 # Wyse 370 -- 24 line screen with status line.
12159 # The terminal may have to be set for 8 data bits and 2 stop
12160 # bits for the arrow keys to work.
12162 # If you change keyboards the terminal will send different
12163 # escape sequences.
12164 # The following definition is for the basic terminal without
12167 # <u0> -> enter Tektronix 4010/4014 mode
12168 # <u1> -> exit Tektronix 4010/4014 mode
12169 # <u2> -> enter ASCII mode (from any ANSI mode)
12170 # <u3> -> exit ASCII mode (goto native ANSI mode)
12171 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
12172 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
12174 # Bug: The <op> capability resets attributes.
12175 wy370-nk|wyse 370 without function keys,
12176 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
12177 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
12178 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12179 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12180 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12181 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12182 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12183 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
12184 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
12185 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
12186 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
12187 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
12188 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
12189 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
12190 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
12192 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
12193 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
12194 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
12195 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
12197 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
12198 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
12199 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
12201 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
12202 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
12203 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
12204 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
12205 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
12206 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
12207 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
12208 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12209 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12210 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
12211 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
12212 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
12213 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
12214 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
12216 # Function key set for the ASCII (wy-50 compatible) keyboard
12217 # This is the default 370.
12219 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
12220 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12221 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
12222 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12223 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
12224 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12225 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
12226 knp=\E[U, kpp=\E[V, use=wy370-nk,
12228 # Function key set for the VT-320 (and wy85) compatible keyboard
12230 wy370-105k|Wyse 370 with 105 key keyboard,
12231 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12232 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
12233 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
12234 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
12235 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
12236 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
12237 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
12238 use=wy370-nk, use=vt220+keypad,
12240 # Function key set for the PC compatible keyboard
12242 wy370-EPC|Wyse 370 with 102 key keyboard,
12243 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12244 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
12245 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12246 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12247 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
12249 # Wyse 370 with visual bell.
12250 wy370-vb|Wyse 370 with visible bell,
12253 # Wyse 370 in 132-column mode.
12254 wy370-w|Wyse 370 in 132-column mode,
12256 rs2=\E[35h\E[?3h$<70>, use=wy370,
12258 # Wyse 370 in 132-column mode with visual bell.
12259 wy370-wvb|Wyse 370 with visible bell 132-columns,
12260 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
12261 wy370-rv|Wyse 370 reverse video,
12262 rs3=\E[32h\E[?5h, use=wy370,
12264 # Wyse 99gt Tektronix 4010/4014 emulator,
12266 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
12269 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
12270 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
12271 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
12272 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
12273 %{31}%&%{64}%+%c\037,
12275 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
12278 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
12280 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
12282 # Wyse 160 Tektronix 4010/4014 emulator,
12284 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
12285 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
12286 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
12287 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
12288 %{31}%&%{64}%+%c\037,
12289 home=^]8`g @\037, use=wy99gt-tek,
12291 # Wyse 370 Tektronix 4010/4014 emulator,
12293 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
12296 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
12297 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
12298 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
12299 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
12301 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
12304 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
12306 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
12307 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
12309 # Vendor-supplied Wyse entries end here.
12312 #TITLE: TERMINFO ENTRY WY520
12314 # The WY520 terminfo is based on the WY285 entry published on the WYSE
12315 # BBS with the addition of more function keys and special keys.
12317 # rs1 -> set personality
12318 # rs2 -> set number of columns
12319 # rs3 -> set number of lines
12320 # is1 -> select the proper font
12321 # is2 -> do the initialization
12322 # is3 -> If this string is empty then rs3 gets sent.
12324 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
12325 # - The BS key is programmed to generate BS in smcup since
12326 # is2 doesn't seem to work.
12327 # - Remove and shift/Remove: delete a character
12328 # - Insert : enter insert mode
12329 # - Find : delete to end of file
12330 # - Select : clear a line
12331 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
12333 # - Bottom status line (host writable line) is used.
12334 # - smkx,rmkx are removed because this would put the numeric
12335 # keypad in Dec application mode which doesn't seem to work
12336 # with SCO applications.
12338 wy520|wyse520|wyse 520,
12339 am, hs, km, mc5i, mir, xenl, xon,
12340 cols#80, it#8, lines#24, wsl#80,
12341 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12342 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12343 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12344 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12345 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12346 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12347 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
12348 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
12349 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
12350 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
12351 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
12352 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12353 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
12354 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12355 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
12356 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
12357 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12358 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12359 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12360 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
12361 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
12362 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12363 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
12364 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
12365 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12366 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12367 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12368 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12369 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
12370 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12371 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
12372 vpa=\E[%i%p1%dd, use=vt220+keypad,
12374 # Wyse 520 with 24 data lines and status (terminal status)
12375 wy520-24|wyse520-24|wyse 520 with 24 data lines,
12377 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12380 # Wyse 520 with visual bell.
12381 wy520-vb|wyse520-vb|wyse 520 with visible bell,
12382 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
12384 # Wyse 520 in 132-column mode.
12385 wy520-w|wyse520-w|wyse 520 in 132-column mode,
12387 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12388 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
12390 # Wyse 520 in 132-column mode with visual bell.
12391 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
12392 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
12395 # Wyse 520 emulating a vt420 7 bit mode.
12396 # The DEL key is programmed to generate BS in is2.
12397 # With EPC keyboard.
12398 # - 'End' key will clear till end of line on EPC keyboard
12399 # - Shift/End : ignored.
12400 # - Insert : enter insert mode.
12401 # - Delete : delete a character (have to change interrupt character
12402 # to CTRL-C: stty intr '^c') for it to work since the
12403 # Delete key sends 7FH.
12404 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
12405 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
12406 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
12409 # Wyse 520 with 24 data lines and status (terminal status)
12410 # with EPC keyboard.
12411 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
12413 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12416 # Wyse 520 with visual bell.
12417 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
12418 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
12420 # Wyse 520 in 132-column mode.
12421 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
12423 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12424 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
12426 # Wyse 520 in 132-column mode with visual bell.
12427 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
12428 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
12430 # Wyse 520 in 80-column, 36 lines
12431 wy520-36|wyse520-36|wyse 520 with 36 data lines,
12434 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
12437 # Wyse 520 in 80-column, 48 lines
12438 wy520-48|wyse520-48|wyse 520 with 48 data lines,
12441 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
12444 # Wyse 520 in 132-column, 36 lines
12445 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
12448 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
12451 # Wyse 520 in 132-column, 48 lines
12452 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
12455 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
12459 # Wyse 520 in 80-column, 36 lines with EPC keyboard
12460 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
12463 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
12466 # Wyse 520 in 80-column, 48 lines with EPC keyboard
12467 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
12470 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
12473 # Wyse 520 in 132-column, 36 lines with EPC keyboard
12474 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
12477 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
12480 # Wyse 520 in 132-column, 48 lines with EPC keyboard
12481 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
12484 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
12487 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
12488 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
12489 # file and we don't know what <hts> is -- esr)
12490 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
12492 cols#80, it#8, lines#24,
12493 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
12494 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
12495 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
12496 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
12497 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
12498 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
12501 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
12502 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
12503 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12504 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
12507 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
12508 wy100q|Wyse 100 for Quotron,
12510 cols#80, lines#24, xmc#1,
12511 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
12512 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12513 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
12514 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
12515 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
12517 #### Kermit terminal emulations
12519 # Obsolete Kermit versions may be listed in the section describing obsolete
12520 # non-ANSI terminal emulators later in the file.
12523 # KERMIT standard all versions.
12524 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
12525 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12526 # From: greg small <gts@populi.berkeley.edu> 9-25-84
12527 kermit|standard kermit,
12530 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12531 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
12532 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
12533 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
12534 kermit-am|standard kermit plus auto-margin,
12536 is2=K1 Standard Kermit plus Automatic Margins\n,
12538 # IBMPC Kermit 1.2.
12539 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
12540 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
12542 # From: greg small <gts@populi.berkeley.edu> 8-30-84
12543 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
12546 clear=\EH\EJ, ed@, el@,
12547 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
12548 # IBMPC Kermit 1.20
12549 # Cannot use line 25, now acts funny like ansi special scrolling region.
12550 # Initialization must escape from that region by cursor position to line 24.
12551 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
12552 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
12553 # From: greg small <gts@populi.berkeley.edu> 12-19-84
12554 pckermit120|UCB IBMPC Kermit 1.20,
12556 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
12558 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
12560 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
12561 # MS-DOS Kermit 2.27 for the IBMPC
12562 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
12563 # Cannot use line 25, now acts funny like ansi special scrolling region.
12564 # Initialization must escape from that region by cursor position to line 24.
12565 # Does not use am: because autowrap is lost when kermit dropped and restarted.
12566 # Reverse video for standout like H19.
12567 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12568 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12569 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
12571 cols#80, it#8, lines#24,
12572 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12573 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12574 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
12575 home=\EH, ht=^I, il1=\EL,
12576 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
12577 \sIBMPC\s3-17-85\n,
12578 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
12579 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
12580 # MS-DOS Kermit 2.27 with automatic margins
12581 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12582 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
12584 cvvis=\EO\Eq\EG\EvK5,
12585 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
12586 \smargins\s3-17-85\n,
12588 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
12589 # Automatic margins now default. Use ansi <sgr> for highlights.
12590 # Define function keys.
12591 # (msk22714: removed obsolete ":kn#10:" -- esr)
12592 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12593 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
12595 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
12596 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
12597 \sIBM\sPC\s3-17-85\n,
12598 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
12599 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12600 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
12601 # This was designed for a VT320 emulator, but it is probably a good start
12602 # at support for the VT320 itself.
12603 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
12604 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
12605 vt320-k3|MS-Kermit 3.00's vt320 emulation,
12606 am, eslok, hs, km, mir, msgr, xenl,
12607 cols#80, it#8, lines#49, pb#9600, vt#3,
12608 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12609 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12610 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
12611 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12612 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12613 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12614 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12615 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
12616 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
12618 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12619 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12620 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
12621 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
12622 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12623 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
12624 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
12625 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
12626 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12627 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
12628 \E[4i\E[?4i\E[m\E[r\E[2$~,
12629 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
12630 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12631 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
12632 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
12633 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
12634 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
12635 vt320-k311|dec vt320 series as defined by kermit 3.11,
12636 am, eslok, hs, mir, msgr, xenl, xon,
12637 cols#80, it#8, lines#24, vt#3,
12638 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12639 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12640 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
12641 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12642 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12643 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12644 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12645 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
12646 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
12647 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
12649 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
12650 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12651 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12652 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
12653 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
12654 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
12655 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
12656 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
12657 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
12658 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
12660 ######## NON-ANSI TERMINAL EMULATIONS
12665 # These entries attempt to describe Avatar, a terminal emulation used with
12666 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
12667 # capabilities, but with cheaper (shorter) control sequences. Messy design,
12668 # excessively dependent on PC idiosyncrasies, but apparently rather popular
12669 # in the BBS world.
12671 # No color support. Avatar doesn't fit either of the Tektronix or HP color
12672 # models that terminfo knows about. An Avatar color attribute is the
12673 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
12675 # I wrote these entries while looking at the Avatar spec. I don't have
12676 # the facilities to test them. Let me know if they work, or don't.
12678 # Avatar escapes not used by these entries (because maybe you're smarter
12679 # and more motivated than I am and can figure out how to wrap terminfo
12680 # around some of them, and because they are weird enough to be funny):
12682 # ^L -- clear window/reset current attribute to default
12683 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
12685 # bit: 6 5 4 3 2 1 0
12687 # +---+---+ | +---+---+
12689 # | | foreground color
12690 # | foreground intensity
12693 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
12694 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
12695 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
12696 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
12697 # (^V^L and ^V^M set the current attribute as a side-effect.)
12698 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
12699 # in the pattern, <c> the number of times the pattern
12700 # should be repeated. If either value is 0, no-op.
12701 # The pattern can contain Avatar console codes,
12702 # including other ^V ^Y patterns.
12704 # ^V^O -- clockwise mode on; turn print direction right each time you
12705 # hit a window edge (yes, really). Turned off by CR
12707 # ^V^Q%c -- query the driver
12708 # ^V^R -- driver reset
12709 # ^V^S -- Sound tone (PC-specific)
12710 # ^V^T -- change highlight at current cursor position to %c
12711 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
12712 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
12715 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12716 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
12717 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
12718 # which is the only method that will actually work for multiple highlights.)
12720 # Update by TD - 2004: half of this was inconsistent. Found documentation
12721 # and repaired most of the damage. sgr0 is probably incorrect, but the
12722 # available documentation gives no clues for a workable string.
12723 avatar0|avatar terminal emulator level 0,
12725 cols#80, it#8, lines#25,
12726 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
12727 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
12728 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
12730 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
12731 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
12732 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
12733 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
12735 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12736 avatar0+|avatar terminal emulator level 0+,
12737 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
12738 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12739 avatar|avatar1|avatar terminal emulator level 1,
12740 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
12741 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
12745 # RBComm is a lean and mean terminal emulator written by the Interrupt List
12746 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
12747 # '90s), especially in the BBS world, and still has some loyal users due to
12748 # its very small memory footprint and to a cute macro language.
12749 rbcomm|IBM PC with RBcomm and EMACS keybindings,
12750 am, bw, mir, msgr, xenl,
12751 cols#80, it#8, lines#25,
12752 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12753 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12754 cub1=^H, cud1=^C, cuf1=^B,
12755 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
12756 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
12757 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
12758 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
12759 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
12760 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
12761 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
12762 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
12763 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
12764 rbcomm-nam|IBM PC with RBcomm without autowrap,
12766 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12767 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
12768 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12769 rbcomm-w|IBM PC with RBcomm in 132 column mode,
12771 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12772 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
12773 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12775 ######## LCD DISPLAYS
12778 #### Matrix Orbital
12779 # from: Eric Z. Ayers (eric@ale.org)
12781 # Matrix Orbital 20x4 LCD display
12782 # Command Character is 0xFE (decimal 254, octal 376)
12784 # On this device, cursor addressability isn't possible. The LCD expects:
12785 # 0xfe G <col> <row>
12786 # for cup: %p1 == row and %p2 is column
12789 # cup=\376G%p2%c%p1%c
12790 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
12791 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
12793 # Alas, there is no cursor upline capability on this display.
12795 # These entries add some 'sanity stuff' to the clear function. That is, it
12796 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
12797 # and turns off the cursor blinking and stuff like that.
12799 # NOTE: calling 'beep' turns on the backlight (bell)
12800 # NOTE: calling 'flash' turns it on and back off (visual bell)
12802 MtxOrb|Generic Matrix Orbital LCD display,
12803 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
12804 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
12805 flash=\376B\001$<200>\376F, home=\376H,
12806 MtxOrb204|20x4 Matrix Orbital LCD display,
12807 cols#20, lines#4, use=MtxOrb,
12808 MtxOrb162|16x2 Matrix Orbital LCD display,
12809 cols#16, lines#2, use=MtxOrb,
12812 ######## OLDER TERMINAL TYPES
12814 # This section is devoted to older commercial terminal brands that are now
12815 # discontinued, but known to be still in use or represented by emulations.
12818 #### AT&T (att, tty)
12820 # This section also includes Teletype-branded VDTs.
12822 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
12823 # Boundless Technologies); for details, see the header comment on the ADDS
12826 # These are AT&T's official terminfo entries. All-caps aliases have been
12829 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
12830 am, eo, mir, msgr, xon,
12831 cols#80, it#8, lines#24,
12832 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
12833 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12834 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12835 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12836 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12837 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12838 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12839 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
12840 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
12841 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
12842 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
12843 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12844 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
12846 att2350|AT&T 2350 Video Information Terminal 80 column mode,
12847 mc0@, mc4@, mc5@, use=att2300,
12849 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
12850 # Seems upward compatible with vt100, plus ins/del line/char.
12851 # On sgr, the protection parameter is ignored.
12852 # No check is made to make sure that only 3 parameters are output.
12853 # standout= reverse + half-intensity = 3 | 5.
12854 # bold= reverse + underline = 2 | 3.
12855 # note that half-bright blinking doesn't look different from normal blinking.
12856 # NOTE:you must program the function keys first, label second!
12857 # (att4410: a BSD entry has been seen with the following capabilities:
12858 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
12859 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
12860 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
12861 am, hs, mir, msgr, xon,
12862 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12863 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
12865 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
12866 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
12867 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
12868 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
12869 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
12870 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
12871 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
12872 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
12873 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
12874 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
12875 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
12877 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12878 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
12879 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
12880 ll=\E[24H, nel=\r\n,
12881 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
12883 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12884 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12886 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12887 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12888 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12889 tsl=\E7\E[25;%p1%{1}%+%dH,
12891 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
12893 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
12895 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
12897 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
12900 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
12902 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
12904 # 5410 in terms of a vt100
12905 # (v5410: added <rmam>/<smam> based on init string -- esr)
12906 v5410|att5410 in terms of a vt100,
12907 am, mir, msgr, xon,
12908 cols#80, it#8, lines#24, vt#3,
12909 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12910 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
12911 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12912 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
12913 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
12914 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
12915 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
12916 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12917 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
12918 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
12919 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12921 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
12922 %;m%?%p9%t\016%e\017%;$<2>,
12923 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
12924 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
12928 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
12929 # even! the 5420 has three modes: scroll, window or page mode
12930 # this terminfo should work in scroll or window mode, but doesn't
12931 # take advantage of any of the differences between them.
12933 # Has memory below (2 lines!)
12934 # 3 pages of memory (plus some spare)
12935 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
12936 # <hpa>, <hts> would work for these, but these work in both scroll and window
12937 # mode... Unset insert character so insert mode works
12938 # <is1> sets 80 column mode,
12939 # <is2> escape sequence:
12940 # 1) turn off all fonts
12941 # 2) function keys off, keyboard lock off, control display off,
12942 # insert mode off, erasure mode off,
12943 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
12944 # 4) reset origin mode
12945 # 5) set line wraparound
12946 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
12948 # 8) program ENTER to transmit ^J,
12949 # We use \212 to program the ^J because a bare ^J will get translated by
12950 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
12952 # <is3> set screen color to black,
12953 # No representation in terminfo for the delete word key: kdw1=\Ed
12954 # Key capabilities assume the power-up send sequence...
12955 # This <rmcup> is not strictly necessary, but it helps maximize
12956 # memory usefulness: <rmcup=\Ez>,
12957 # Alternate sgr0: <sgr0=\E[m\EW^O>,
12958 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
12959 # smkx programs the SYS PF keys to send a set sequence.
12960 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
12961 # This string causes them to send the strings <kf1>-<kf8>
12962 # when pressed in SYS PF mode.
12963 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
12964 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
12965 OTbs, db, mir, xon,
12966 lh#2, lm#78, lw#8, nlab#8, wsl#55,
12967 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
12968 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
12969 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
12970 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
12971 flash=\E[?5h$<200>\E[?5l, home=\E[x,
12972 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
12973 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
12974 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12975 \E[4i\Ex\E[21;1j\212,
12976 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
12977 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
12978 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12979 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12980 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12981 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
12982 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
12983 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
12984 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
12985 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
12986 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
12987 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12988 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12989 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
12990 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
12991 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12994 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
12995 cols#132, lm#54, wsl#97,
12996 is1=\E[?3h$<100>, use=att4415,
12998 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
12999 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
13001 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
13002 cols#132, lm#54, wsl#97,
13003 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
13006 # Note that this mode permits programming USER PF KEYS and labels
13007 # However, when you program user pf labels you have to reselect
13008 # user pf keys to make them appear!
13009 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
13010 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
13011 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13013 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
13015 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
13016 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13019 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
13020 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13023 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
13024 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13027 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
13028 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
13031 att5420_2|AT&T 5420 model 2 80 cols,
13032 am, db, hs, mir, msgr, xon,
13033 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13034 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13035 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
13036 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13037 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
13038 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
13039 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13040 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
13041 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13042 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
13043 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13044 indn=\E[%p1%dE, invis=\E[8m,
13045 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
13046 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13048 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
13049 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
13050 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
13051 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
13052 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
13053 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
13054 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
13055 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
13056 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
13058 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
13059 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
13060 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
13062 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
13063 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
13064 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
13065 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13066 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
13067 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
13069 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
13070 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
13074 att4418|att5418|AT&T 5418 80 cols,
13077 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13078 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
13079 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
13080 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
13081 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
13082 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
13083 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
13084 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
13085 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
13086 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
13087 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
13088 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
13089 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
13090 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
13091 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
13092 att4418-w|att5418-w|AT&T 5418 132 cols,
13094 is1=\E[?3h, use=att5418,
13096 att4420|tty4420|teletype 4420,
13097 OTbs, da, db, eo, msgr, ul, xon,
13098 cols#80, lines#24, lm#72,
13099 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
13100 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13101 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
13102 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
13103 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
13104 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
13105 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
13106 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
13108 # The following is a terminfo entry for the Teletype 4424
13109 # asynchronous keyboard-display terminal. It supports
13110 # the vi editor. The terminal must be set up as follows,
13112 # HIGHLIGHT DEFINITION 3-TONE
13113 # DISPLAY FUNCTION GROUP III
13115 # The second entry below provides limited (a la adm3a)
13116 # operation under GROUP II.
13118 # This must be used with DISPLAY FUNCTION GROUP I or III
13119 # and HIGHLIGHT DEFINITION 3-TONE
13120 # The terminal has either bold or blink, depending on options
13122 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
13123 att4424|tty4424|teletype 4424,
13126 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13127 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
13128 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13129 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
13130 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
13131 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
13132 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13133 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
13134 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13135 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
13136 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
13138 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
13139 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
13140 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
13143 att4424-1|tty4424-1|teletype 4424 in display function group I,
13144 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
13147 # This entry is not one of AT&T's official ones, it was translated from the
13148 # 4.4BSD termcap file. The highlight strings are different from att4424.
13149 # I have no idea why this is -- older firmware version, maybe?
13150 # The following two lines are the comment originally attached to the entry:
13151 # This entry appears to avoid the top line - I have no idea why.
13152 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
13153 att4424m|tty4424m|teletype 4424M,
13155 cols#80, it#8, lines#23,
13156 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
13157 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
13158 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
13159 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
13160 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13161 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
13162 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13164 # The Teletype 5425 is really version 2 of the Teletype 5420. It
13165 # is quite similar, except for some minor differences. No page
13166 # mode, for example, so all of the <cup> sequences used above have
13167 # to change back to what's being used for the 5410. Many of the
13168 # option settings have changed their numbering as well.
13170 # This has been tested on a preliminary model.
13172 # (att5425: added <rmam>/<smam> based on the init string -- esr)
13173 att5425|tty5425|att4425|AT&T 4425/5425,
13174 am, da, db, hs, mir, msgr, xenl, xon,
13175 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
13176 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13177 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13178 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
13179 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13180 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13181 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13182 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13183 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
13184 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
13185 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
13186 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13187 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
13188 invis=\E[8m, is1=\E<\E[?3l$<100>,
13189 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
13190 \E[4i\Ex\E[25;1j\212,
13191 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
13192 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13193 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
13194 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
13195 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
13196 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
13198 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13199 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
13200 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
13201 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
13202 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
13203 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13204 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
13205 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13206 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
13207 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
13208 vpa=\E[%p1%{1}%+%dd,
13210 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
13211 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
13213 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
13214 cols#132, lm#54, wsl#97,
13215 is1=\E[?3h$<100>, use=tty5425,
13217 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
13218 # I also added <rmam>/<smam> -- esr)
13219 att4426|tty4426|teletype 4426S,
13221 cols#80, lines#24, lm#48,
13222 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13223 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
13224 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
13225 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13226 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
13227 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
13228 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
13229 il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h,
13230 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
13231 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ,
13232 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
13233 khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8,
13234 rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
13235 rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
13236 smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
13237 vpa=\E[%p1%dd, use=ecma+index,
13239 # Terminfo entry for the AT&T 510 A Personal Terminal
13240 # Function keys 9 - 16 are available only after the
13241 # screen labeled (soft keys/action blocks) are labeled. Function key
13242 # 9 corresponds to the leftmost touch target on the screen,
13243 # function key 16 corresponds to the rightmost.
13245 # This entry is based on one done by Ernie Rice at Summit, NJ and
13246 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
13247 att510a|bct510a|AT&T 510A Personal Terminal,
13248 am, mir, msgr, xenl, xon,
13249 cols#80, lh#2, lines#24, lw#7, nlab#8,
13250 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13251 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13252 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
13253 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13254 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13255 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
13256 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
13257 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
13258 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
13259 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
13260 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
13261 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
13262 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
13263 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
13264 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
13265 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
13266 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
13267 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13268 %|%t;7%;m%?%p9%t\016%e\017%;,
13269 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
13270 smul=\E[4m, tbc=\E[3g,
13272 # Terminfo entry for the AT&T 510 D Personal Terminal
13273 # Function keys 9 through 16 are accessed by bringing up the
13275 # Function key 9 corresponds to the leftmost touch target on the screen,
13276 # function key 16 corresponds to the rightmost.
13278 # There are problems with soft key labeling. These are due to
13279 # strangenesses in the native terminal that are impossible to
13280 # describe in a terminfo.
13281 att510d|bct510d|AT&T 510D Personal Terminal,
13282 am, da, db, mir, msgr, xenl, xon,
13283 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
13284 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13285 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13286 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
13287 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
13288 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
13289 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
13290 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
13291 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
13292 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13293 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
13294 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
13295 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
13296 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
13297 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
13298 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
13299 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
13300 mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
13301 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
13302 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13303 rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m, rmul=\E[m,
13304 rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
13305 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
13306 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13307 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
13308 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
13309 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
13312 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
13313 att500|att513|AT&T 513 using page mode,
13314 am, chts, mir, msgr, xenl, xon,
13315 cols#80, lh#2, lines#24, lw#8, nlab#8,
13316 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
13317 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
13318 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
13319 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13320 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
13321 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13322 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
13323 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13324 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13325 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
13326 indn=\E[%p1%dE, invis=\E[8m,
13327 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
13328 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13329 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13330 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
13331 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
13332 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
13333 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
13334 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
13335 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13336 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
13337 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13338 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
13339 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
13340 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13341 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13342 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
13343 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
13344 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
13346 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13348 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13350 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
13351 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
13352 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
13353 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
13354 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
13356 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
13357 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
13358 rs2=\E[5;0|, sc=\E7,
13359 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13360 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13361 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
13362 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
13363 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
13366 # printer must be set to EMUL ANSI to accept ESC codes
13367 # <cuu1> stops at top margin
13368 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
13369 # and alt font ascii,wrap on,tabs cleared
13370 # <is2> disables newline on LF,Emphasized off
13371 # The <u0> capability sets form length
13372 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
13374 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
13375 orhi#100, orl#12, orvi#72,
13376 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
13377 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
13378 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
13381 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
13382 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
13383 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
13384 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
13385 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
13386 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
13388 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
13389 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
13390 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
13391 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
13393 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
13394 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
13395 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
13396 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
13397 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
13399 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
13400 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
13401 u0=\E[%p1%dt, vpa=\E[%p1%dd,
13403 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
13404 # The following SET-UP modes are assumed for normal operation:
13405 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
13406 # Other SET-UP modes may be set for operator convenience or communication
13407 # requirements. This termcap description is for the Resident Terminal Mode.
13408 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13409 # The BRL entry also said: UNSAFE :ll=\E[70H:
13410 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
13412 cols#88, it#8, lines#70, vt#3,
13413 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
13414 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
13415 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13416 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
13417 il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13418 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n,
13419 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index,
13421 # 5620 terminfo (2.0 or later ROMS with char attributes)
13422 # The following SET-UP modes are assumed for normal operation:
13423 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
13424 # Other SET-UP modes may be set for operator convenience or communication
13425 # requirements. This termcap description is for Resident Terminal Mode. No
13426 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13427 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
13428 # Be aware that older versions of the dmd have a firmware bug that affects
13429 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
13430 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
13431 # also has <ll>=\E[70H commented out and marked unsafe.
13432 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
13433 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
13434 OTbs, am, msgr, npc, xon,
13435 cols#88, it#8, lines#70,
13436 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
13437 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13438 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
13439 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13440 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H,
13441 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13442 khome=\E[H, kll=\E[70;1H, nel=\n,
13443 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
13444 rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
13445 smso=\E[7m, smul=\E[4m, use=ecma+index,
13446 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
13447 lines#24, use=att5620,
13448 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
13449 lines#34, use=att5620,
13450 # 5620 layer running the "S" system's downloaded graphics handler:
13451 att5620-s|tty5620-s|layer|vitty|5620 S layer,
13453 cols#80, it#8, lines#72,
13454 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
13455 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
13456 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
13457 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
13460 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
13462 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
13463 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
13464 att605|AT&T 605 80 column 102key keyboard,
13466 cols#80, lines#24, lw#8, nlab#8, wsl#80,
13467 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13468 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13469 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
13470 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
13471 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13472 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13473 il1=\E[L, ind=\n, invis=\E[8m,
13474 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
13475 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
13476 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13477 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
13478 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
13479 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
13480 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
13481 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
13482 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
13483 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
13484 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
13485 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
13486 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
13487 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
13488 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13489 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13490 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13491 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
13492 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
13493 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13494 tsl=\E7\E[25;%i%p1%dx,
13495 att605-pc|ATT 605 in pc term mode,
13496 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
13498 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
13499 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
13500 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13501 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
13502 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
13503 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
13504 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
13505 xoffc=g, xonc=e, use=att605,
13506 att605-w|AT&T 605-w 132 column 102 key keyboard,
13508 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
13509 # (att610: I added <rmam>/<smam> based on the init string. I also
13510 # added <indn> and <rin> because the BSD file says the att615s have them,
13511 # and the 615 is like a 610 with a big keyboard, and most of their other
13512 # smart terminals support the same sequence -- esr)
13513 att610|AT&T 610; 80 column; 98key keyboard,
13514 am, eslok, hs, mir, msgr, xenl, xon,
13515 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13516 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13517 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13518 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13520 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13522 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13523 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13524 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13525 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13527 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
13528 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13529 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13530 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13531 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13532 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13533 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
13535 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13536 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13537 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
13538 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
13539 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13540 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13541 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13542 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
13544 att610-w|AT&T 610; 132 column; 98key keyboard,
13546 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13549 att610-103k|AT&T 610; 80 column; 103key keyboard,
13550 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13551 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13552 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13553 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13554 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13555 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13556 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13557 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
13558 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
13559 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
13560 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
13561 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
13562 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
13563 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
13565 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13567 att615|AT&T 615; 80 column; 98key keyboard,
13568 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13569 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13570 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13571 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13572 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13573 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13574 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
13575 att615-w|AT&T 615; 132 column; 98key keyboard,
13576 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13577 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13578 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13579 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13580 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13581 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13582 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
13583 att615-103k|AT&T 615; 80 column; 103key keyboard,
13584 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
13585 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
13586 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
13587 # (att620: I added <rmam>/<smam> based on the init string and
13588 # <rin>/<indn> from a BSD termcap -- esr)
13589 att620|AT&T 620; 80 column; 98key keyboard,
13590 am, eslok, hs, mir, msgr, xenl, xon,
13591 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13592 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13593 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13594 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13595 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13596 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13597 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13598 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13599 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13600 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13601 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13603 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
13604 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
13605 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13606 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13607 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13608 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
13609 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
13610 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
13611 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
13612 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
13613 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
13614 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13615 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
13616 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13617 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13618 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13619 ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l,
13620 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
13621 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13622 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
13623 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
13624 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13625 tsl=\E7\E[25;%i%p1%dx, use=ecma+index,
13626 att620-w|AT&T 620; 132 column; 98key keyboard,
13628 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13630 att620-103k|AT&T 620; 80 column; 103key keyboard,
13631 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13632 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13633 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13634 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13635 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13636 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13637 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13638 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
13639 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
13640 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
13641 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
13642 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
13643 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13644 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13645 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
13646 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
13648 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
13650 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13653 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
13654 # The following SETUP modes are assumed for normal operation:
13655 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
13656 # Font_Size=Large Non-Layers_Window_Cols=80
13657 # Non-Layers_Window_Rows=60
13658 # Other SETUP modes may be set for operator convenience or communication
13659 # requirements. Some capabilities assume a printer attached to the Aux EIA
13660 # port. This termcap description is for the Fixed Non-Layers Window. No
13661 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13662 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
13663 att630|AT&T 630 windowing terminal,
13664 OTbs, am, da, db, mir, msgr, npc, xon,
13665 cols#80, it#8, lines#60, lm#0,
13666 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
13667 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13668 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13669 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13670 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13671 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13672 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z,
13673 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13674 kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq,
13675 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
13676 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{,
13677 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H,
13678 kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
13679 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
13680 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
13681 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
13683 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13685 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
13686 lines#24, use=att630,
13688 # This is the att700 entry for 700 native emulation of the AT&T 700
13689 # terminal. Comments are relative to changes from the 605V2 entry and
13690 # att730 on which the entry is based. Comments show the terminfo
13691 # capability name, termcap name, and description.
13693 # Here is what's going onm in the init string:
13694 # ESC [ 50;4| set 700 native mode (really is 605)
13695 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
13696 # ESC [ 53;0| set GenFlow to Xon/Xoff
13697 # ESC [ 8 ;0| set CR on NL
13698 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
13699 # ESC [ ? 4 l jump scroll
13700 # ESC [ ? 5 l/h video: normal (l); reverse (h)
13701 # ESC [ ?13 l Labels on
13702 # ESC [ ?15 l parity check = no
13703 # ESC [ 13 l monitor mode off
13704 # ESC [ 20 l LF on NL (not CRLF on NL)
13705 # ESC [ ? 7 h autowrap on
13706 # ESC [ 12 h local echo off
13707 # ESC ( B GO = ASCII
13708 # ESC ) 0 G1 = Special Char & Line Drawing
13709 # ESC [ ? 31 l Set 7 bit controls
13711 # Note: Most terminals, especially the 600 family use Reverse Video for
13712 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
13713 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
13714 # standout mode with \E[m (all normal attributes). The 730 entry simply
13715 # exits reverse video which would leave other current attributes intact. It
13716 # was assumed the 730 entry to be more correct so rmso has changed. The
13717 # 605V2 has no sequences to turn individual attributes off, thus its setting
13718 # and the rmso/smso settings from the 730.
13720 # Note: For the same reason as above in rmso I changed exit under-score mode
13721 # to specifically turn off underscore, rather than return to all normal
13724 # Note: The following pkey_xmit is taken from the 605V2 which contained the
13725 # capability as pfxl. It was changed here to pfx since pfxl
13726 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
13727 # allows strings to be parameters and label values must be programmed as
13728 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
13729 # and strings to be parameters. The 605V2 pfx entry should be examined later
13730 # in this regard. For reference the 730 pfxl entry is shown here for comparison
13732 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
13733 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13736 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13739 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13741 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
13745 # modular 10 pin Connector
13746 # Left side Right side
13747 # Pin 1 2 3 4 5 6 7 8 9 10
13749 # Key (notch) at bottom
13761 # The manual is 189 pages and is loaded with details about the escape codes,
13762 # etc..... Available from AT&T CIC 800-432-6600...
13763 # ask for Document number 999-300-660..
13765 att700|AT&T 700 24x80 column display w/102key keyboard,
13766 am, eslok, hs, mir, msgr, xenl, xon,
13767 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13768 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13769 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13770 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13771 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13772 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13773 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13774 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13775 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13776 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
13777 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13778 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
13779 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
13780 \E(B\E)0\E[?31l\E[0m\017,
13781 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
13782 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13783 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
13784 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
13785 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
13786 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
13787 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
13788 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
13789 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
13790 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13791 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
13792 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13793 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
13794 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13795 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
13796 \s\s\s\s\s\s%;%p2%s,
13797 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13798 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13799 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
13800 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
13801 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13802 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13803 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
13804 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
13805 tsl=\E7\E[99;%i%p1%dx,
13807 # This entry was modified 3/13/90 by JWE.
13808 # fixes include additions of <enacs>, correcting <rep>, and modification
13809 # of <kHOM>. (See comments below)
13810 # att730 has status line of 80 chars
13811 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
13812 # the <kf25> and up keys are used for shifted system Fkeys
13813 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
13814 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
13815 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
13816 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
13817 # 102, 102+1, or 122 key keyboards
13819 # (att730: I added <rmam>/<smam> based on the init string -- esr)
13820 att730|AT&T 730 windowing terminal,
13821 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
13822 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
13823 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13824 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13825 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13826 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13827 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13828 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13829 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13830 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13831 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13832 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
13833 ind=\ED, invis=\E[8m,
13834 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
13835 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13836 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13837 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13838 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
13839 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
13840 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
13841 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
13842 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
13843 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
13844 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
13845 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
13846 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13847 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
13848 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13849 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
13850 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13851 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
13852 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13853 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13854 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
13855 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
13856 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13857 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13858 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13859 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
13860 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
13861 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
13862 lines#41, use=att730,
13863 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
13864 lines#24, use=att730,
13865 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
13866 flash=\E[?5l$<200>\E[?5h,
13867 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
13868 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
13869 lines#41, use=att730r,
13870 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
13871 lines#24, use=att730r,
13873 # The following represents the screen layout along with the associated
13874 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
13875 # not appear on the screen but are shown to reference the bezel buttons.
13876 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
13877 # position relative to the screen.
13881 # +----------------------------------------------------------------+
13883 # XXXX | kf0 kf24 | XXXX
13886 # XXXX | kf1 kf23 | XXXX
13889 # XXXX | kf2 kf22 | XXXX
13892 # XXXX | kf3 kf21 | XXXX
13895 # XXXX | kf4 kf20 | XXXX
13898 # XXXX | kf5 kf19 | XXXX
13901 # XXXX | kf6 kf18 | XXXX
13907 # +----------------------------------------------------------------+
13909 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
13911 # Note: XXXX represents the screen buttons
13917 # The character string sent by key 'kf26' may be user programmable
13918 # to send either \E[16s, or \E[26s.
13919 # The character string sent by key 'krfr' may be user programmable
13920 # to send either \E[17s, or \E[27s.
13922 # Depression of the "CMD" key sends \E! (kcmd)
13923 # Depression of the "MAIL" key sends \E[26s (kf26)
13924 # "REDRAW" same as "REFRESH" (krfr)
13926 # "kf" functions adds carriage return to output string if terminal is in
13929 # The following are functions not covered in the table above:
13931 # Set keyboard character (SKC): \EPn1;Pn2w
13932 # Pn1= 0 Back Space key
13934 # Pn2= Program char (hex)
13936 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
13937 # Pn1= Window number (1-39)
13938 # Pn2-Pn5= Y;X;Y;X coordinates
13940 # Screen Selection (SSL): \E[Pnu
13941 # Pn= Window number
13943 # Set Terminal Modes (SM): \E[Pnh
13944 # Pn= 3 Graphics mode
13945 # Pn= > Cursor blink
13946 # Pn= < Enter new line mode
13947 # Pn= = Enter reverse insert/replace mode
13948 # Pn= ? Enter no scroll mode
13950 # Reset Terminal Mode (RM): \E[Pnl
13951 # Pn= 3 Exit graphics mode
13952 # Pn= > Exit cursor blink
13953 # Pn= < Exit new line mode
13954 # Pn= = Exit reverse insert/replace mode
13955 # Pn= ? Exit no scroll mode
13957 # Screen Status Report (SSR): \E[Pnp
13958 # Pn= 0 Request current window number
13959 # Pn= 1 Request current window dimensions
13961 # Device Status Report (DSR): \E[6n Request cursor position
13963 # Call Status Report (CSR): \E[Pnv
13964 # Pn= 0 Call failed
13965 # Pn= 1 Call successful
13967 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
13968 # Pn1= Button number to be loaded
13969 # Pn2= Character count of "string"
13970 # Pn3= Key mode being loaded:
13974 # String= Text string (15 chars max)
13976 # Screen Number Report (SNR): \E[Pnp
13977 # Pn= Screen number
13979 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
13980 # Pn1= Number of rows available in window
13981 # Pn2= Number of columns available in window
13983 # Cursor Position Report (CPR): \E[Pn1;Pn2R
13984 # Pn1= "Y" Position of cursor
13985 # Pn2= "X" Position of cursor
13987 # Request Answer Back (RAB): \E[c
13989 # Answer Back Response (ABR): \E[?;*;30;VSV
13990 # *= 0 No printer available
13991 # *= 2 Printer available
13992 # V= Software version number
13993 # SV= Software sub version number
13994 # (printer-available field not documented in v1)
13996 # Screen Alignment Aid: \En
13998 # Bell (lower pitch): \E[x
14000 # Dial Phone Number: \EPdstring\
14001 # string= Phone number to be dialed
14003 # Set Phone Labels: \EPpstring\
14004 # string= Label for phone buttons
14006 # Set Clock: \EPchour;minute;second\
14008 # Position Clock: \EPsY;X\
14009 # Y= "Y" coordinate
14010 # X= "X" coordinate
14012 # Delete Clock: \Epr\
14014 # Programming The Function Buttons: \EPfPn;string\
14015 # Pn= Button number (00-06, 18-24)
14016 # (kf00-kf06, kf18-kf24)
14017 # string= Text to sent on button depression
14019 # The following in version 2 only:
14021 # Request For Local Directory Data: \EPp12;\
14023 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
14025 # Request for Local Directory Data in print format: \EPp13;\
14027 # Enable 'Prt on Line' mode: \022 (DC2)
14029 # Disable 'Prt on Line' mode: \024 (DC4)
14033 # The following Terminfo entry describes functions which are supported by
14034 # the AT&T 5430/pt505 terminal software version 2 and later.
14035 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
14037 cols#80, it#8, lines#24,
14038 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14039 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
14040 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
14041 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14042 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14043 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14044 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
14045 il=\E[%p1%dL, il1=\E[L, ind=\n,
14046 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
14047 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14048 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
14049 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
14050 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
14051 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
14052 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
14053 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
14054 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
14055 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
14057 # The following Terminfo entry describes functions which are supported by
14058 # the AT&T 5430/pt505 terminal software version 1.
14059 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
14061 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
14062 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
14063 lines#22, use=att505,
14065 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
14066 # This cut mark helps make life less painful for people running ncurses tic
14067 # on machines with relatively little RAM. The file can be broken in half here
14068 # cleanly and compiled in sections -- no `use' references cross this cut
14072 #### Ampex (Dialogue)
14074 # Yes, these are the same people who are better-known for making audio- and
14075 # videotape. I'm told they are located in Redwood City, CA.
14078 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
14079 # (ampex80: some capabilities merged in from SCO's entry -- esr)
14080 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
14082 cols#80, it#8, lines#24,
14083 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
14084 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14085 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
14086 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
14087 smso=\Ej, smul=\El, tbc=\E3,
14088 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
14089 ampex175|ampex d175,
14092 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14093 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14094 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
14095 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
14096 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
14097 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
14098 # No backspace key in the main QWERTY cluster. Fortunately, it has a
14099 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
14100 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
14101 # mode), this key can be used as the erase key; I find I like this. Because
14102 # some people and some systems may not, there is another termcap ("ampex175")
14103 # that suppresses this little eccentricity by omitting the relevant capability.
14104 ampex175-b|ampex d175 using left arrow for erase,
14105 kbs=^_, use=ampex175,
14106 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
14107 # (ampex210: removed obsolete ":kn#10:" -- esr)
14108 ampex210|a210|ampex a210,
14109 OTbs, am, hs, xenl,
14110 cols#80, it#8, lines#24, xmc#1,
14111 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
14112 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14113 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
14114 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
14115 if=/usr/share/tabset/std, il1=\EE, invis@,
14116 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
14117 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
14118 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
14119 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
14120 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
14121 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
14122 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
14123 # and moved the padding to be *after* the caps -- esr)
14124 ampex219|ampex-219|amp219|Ampex with Automargins,
14126 cols#80, it#8, lines#24,
14127 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
14128 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
14129 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
14130 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
14131 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
14132 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
14133 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
14134 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
14135 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
14136 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
14137 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
14138 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
14139 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
14140 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
14141 cols#132, lines#24,
14142 bel=^G, cr=\r, cud1=\n, ind=\n,
14143 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
14144 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
14145 ampex232|ampex-232|Ampex Model 232,
14147 cols#80, lines#24, xmc#1,
14148 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
14149 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14150 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
14151 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
14152 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
14153 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
14154 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
14155 kf9=^AI\r, khome=^^, use=adm+sgr,
14156 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
14157 ampex232w|Ampex Model 232 / 132 columns,
14158 cols#132, lines#24,
14159 is2=\E\034Eg\El, use=ampex232,
14161 #### Ann Arbor (aa)
14163 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
14164 # numbers of function keys. At least some used monitors in portrait mode,
14165 # allowing up to 76-character screen heights! They were reachable at:
14167 # Ann Arbor Terminals
14168 # 6175 Jackson Road
14169 # Ann Arbor, MI 48103
14172 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
14173 # can't be found on the Web; I fear they're long dead. R.I.P.
14177 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
14178 # Highly modified 6/22 by Mike O'Brien.
14179 # split out into several for the various screen sizes by dave-yost@rand
14180 # Modifications made 3/82 by Mark Horton
14181 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
14182 # status line moved to top of screen, <flash> removed 5/82
14183 # Some unknown person at SCO then hacked the init strings to make them more
14186 # assumes the following setup:
14187 # A menu: 0000 1010 0001 0000
14188 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
14189 # C menu: 56 66 0 0 9600 0110 1100
14190 # D menu: 0110 1001 1 0
14192 # Briefly, the settings are for the following modes:
14193 # (values are for bit set/clear with * indicating our preference
14194 # and the value used to test these termcaps)
14195 # Note that many of these settings are irrelevant to the terminfo
14196 # and are just set to the default mode of the terminal as shipped
14199 # A menu: 0000 1010 0001 0000
14200 # Block/underline cursor*
14201 # blinking/nonblinking cursor*
14202 # key click/no key click*
14203 # bell/no bell at column 72*
14205 # key pad is cursor control*/key pad is numeric
14206 # return and line feed/return for <cr> key *
14207 # repeat after .5 sec*/no repeat
14208 # repeat at 25/15 chars per sec. *
14210 # hold data until pause pressed/process data unless pause pressed*
14211 # slow scroll/no slow scroll*
14212 # Hold in area/don't hold in area*
14213 # functions keys have default*/function keys disabled on powerup
14215 # show/don't show position of cursor during page transmit*
14220 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
14221 # Baud rate (9600*)
14223 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
14224 # 1 stop bit*/2 stop bits
14225 # parity error detection off*/on
14227 # keyboard local/on line*
14228 # half/full duplex*
14229 # disable/do not disable keyboard after data transmission*
14231 # transmit entire page/stop transmission at cursor*
14232 # transfer/do not transfer protected characters*
14233 # transmit all characters/transmit only selected characters*
14234 # transmit all selected areas/transmit only 1 selected area*
14236 # transmit/do not transmit line separators to host*
14237 # transmit/do not transmit page tab stops tabs to host*
14238 # transmit/do not transmit column tab stop tabs to host*
14239 # transmit/do not transmit graphics control (underline,inverse..)*
14241 # enable*/disable auto XON/XOFF control
14242 # require/do not require receipt of a DC1 from host after each LF*
14243 # pause key acts as a meta key/pause key is pause*
14251 # XON character (17*)
14252 # XOFF character (19*)
14254 # C menu: 56 66 0 0 9600 0110 1100
14255 # number of lines to print data on (printer) (56*)
14257 # number of lines on a sheet of paper (printer) (66*)
14259 # left margin (printer) (0*)
14261 # number of pad chars on new line to printer (0*)
14263 # printer baud rate (9600*)
14265 # printer parity: 00=odd,01=even*,10=space,11=mark
14266 # printer stop bits: 2*/1
14267 # print/do not print guarded areas*
14269 # new line is: 01=LF,10=CR,11=CRLF*
14273 # D menu: 0110 1001 1 0
14274 # LF is newline/LF is down one line, same column*
14275 # wrap to preceding line if move left from col 1*/don't wrap
14276 # wrap to next line if move right from col 80*/don't wrap
14277 # backspace is/is not destructive*
14279 # display*/ignore DEL character
14280 # display will not/will scroll*
14281 # page/column tab stops*
14282 # erase everything*/erase unprotected only
14284 # editing extent: 0=display,1=line*,2=field,3=area
14289 annarbor4080|aa4080|ann arbor 4080,
14292 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
14293 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
14294 %{12}%+%;%{64}%+%c,
14295 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
14296 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
14298 # Strange Ann Arbor terminal from BRL
14299 aas1901|Ann Arbor K4080 w/S1901 mod,
14302 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
14303 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
14306 # If you're using the GNU termcap library, add
14307 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
14308 # to these capabilities. This is the nonstandard GNU termcap scrolling
14309 # capability, arguments are:
14310 # 1. Total number of lines on the screen.
14311 # 2. Number of lines above desired scroll region.
14312 # 3. Number of lines below (outside of) desired scroll region.
14313 # 4. Total number of lines on the screen, the same as the first parameter.
14314 # The generic Ann Arbor entry is the only one that uses this.
14315 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
14316 OTbs, am, km, mc5i, mir, xon,
14318 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14319 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
14320 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
14321 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14322 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
14323 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
14324 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
14325 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
14326 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
14327 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14328 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
14329 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
14330 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
14331 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
14332 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
14333 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
14334 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
14335 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14336 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
14338 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
14339 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14342 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
14344 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14345 vpa=\E[%p1%{1}%+%dd,
14347 aaa+rv|ann arbor ambassador in reverse video,
14348 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
14349 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14350 rs1=\E[H\E[7m\E[J$<156>,
14351 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
14352 %;%?%p7%t8;%;m\016,
14353 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
14354 # Ambassador with the DEC option, for partial vt100 compatibility.
14355 aaa+dec|ann arbor ambassador in dec vt100 mode,
14356 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
14357 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
14358 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
14359 %p7%t8;%;m%?%p9%t\017%e\016%;,
14361 aaa-18|ann arbor ambassador/18 lines,
14363 is2=\E7\E[60;0;0;18p\E8,
14364 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
14366 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
14367 use=aaa+rv, use=aaa-18,
14368 aaa-20|ann arbor ambassador/20 lines,
14370 is2=\E7\E[60;0;0;20p\E8,
14371 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
14373 aaa-22|ann arbor ambassador/22 lines,
14375 is2=\E7\E[60;0;0;22p\E8,
14376 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
14378 aaa-24|ann arbor ambassador/24 lines,
14380 is2=\E7\E[60;0;0;24p\E8,
14381 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
14383 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
14384 use=aaa+rv, use=aaa-24,
14385 aaa-26|ann arbor ambassador/26 lines,
14387 is2=\E7\E[60;0;0;26p\E8,
14388 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
14389 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
14390 aaa-28|ann arbor ambassador/28 lines,
14392 is2=\E7\E[60;0;0;28p\E8,
14393 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
14394 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
14395 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
14398 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14399 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
14400 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
14401 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
14402 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14403 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
14404 use=aaa+rv, use=aaa-30-s,
14405 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
14406 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14407 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
14408 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
14409 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14410 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
14411 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
14413 is2=\E7\E[60;0;0;30p\E8,
14414 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
14415 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
14416 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
14417 use=aaa+rv, use=aaa-30,
14418 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
14419 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14421 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
14422 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14423 use=aaa+rv, use=aaa-30,
14424 aaa-36|ann arbor ambassador/36 lines,
14426 is2=\E7\E[60;0;0;36p\E8,
14427 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
14428 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
14429 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
14430 use=aaa+rv, use=aaa-36,
14431 aaa-40|ann arbor ambassador/40 lines,
14433 is2=\E7\E[60;0;0;40p\E8,
14434 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
14435 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
14436 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
14437 use=aaa+rv, use=aaa-40,
14438 aaa-48|ann arbor ambassador/48 lines,
14440 is2=\E7\E[60;0;0;48p\E8,
14441 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
14442 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
14443 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
14444 use=aaa+rv, use=aaa-48,
14445 aaa-60-s|ann arbor ambassador/59 lines+status,
14448 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14449 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
14450 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14451 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
14452 use=aaa+rv, use=aaa-60-s,
14453 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
14454 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
14455 aaa-60|ann arbor ambassador/60 lines,
14457 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
14459 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
14460 use=aaa+rv, use=aaa-60,
14461 aaa-db|ann arbor ambassador 30/destructive backspace,
14463 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
14465 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
14467 flash=\E[>59h$<100>\E[>59l,
14468 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
14469 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
14470 guru+rv|guru changes for reverse video,
14471 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
14472 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
14473 use=guru+rv, use=guru-33,
14474 guru+s|guru status line,
14476 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
14477 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
14478 tsl=\E[>51h\E[1;%p1%dH\E[2K,
14479 guru-nctxt|guru with no saved context,
14480 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
14481 guru-s|guru-33-s|ann arbor guru/33 lines+status,
14483 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
14484 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14485 guru-24|ann arbor guru 24 lines,
14487 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
14489 guru-44|ann arbor guru 44 lines,
14491 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
14493 guru-44-s|ann arbor guru/44 lines+status,
14495 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
14496 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14497 guru-76|guru with 76 lines by 89 cols,
14499 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
14501 guru-76-s|ann arbor guru/76 lines+status,
14503 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
14504 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14505 guru-76-lp|guru-lp|guru with page bigger than line printer,
14506 cols#134, lines#76,
14507 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
14509 guru-76-w|guru 76 lines by 178 cols,
14510 cols#178, lines#76,
14511 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
14513 guru-76-w-s|ann arbor guru/76 lines+status+wide,
14514 cols#178, lines#75,
14515 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
14516 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14517 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
14518 cols#178, lines#76,
14519 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
14521 aaa-rv-unk|ann arbor unknown type,
14522 lh#0, lw#0, nlab#0,
14523 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
14524 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14526 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
14528 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
14530 #### Applied Digital Data Systems (adds)
14532 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
14533 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
14534 # terminals was merged again. Then AT&T sold the terminal business to
14535 # SunRiver, which later changed its name to Boundless Technologies. The
14536 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
14537 # as of early 1995) are at:
14539 # Boundless Technologies
14540 # 100 Marcus Boulevard
14541 # Hauppauge, NY 11788-3762
14542 # Vox: (800)-231-5445
14543 # Fax: (516)-342-7378
14544 # Web: http://boundless.com
14546 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
14547 # In 1995 Boundless acquired DEC's terminals business.
14550 # Regent: lowest common denominator, works on all regents.
14551 # (regent: renamed ":bc:" to ":le:" -- esr)
14552 regent|Adds Regent Series,
14555 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
14556 home=\EY\s\s, ind=\n, ll=^A,
14557 # Regent 100 has a bug where if computer sends escape when user is holding
14558 # down shift key it gets confused, so we avoid escape.
14559 regent100|Adds Regent 100,
14562 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
14563 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
14564 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
14565 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
14566 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
14567 regent20|Adds Regent 20,
14568 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
14570 regent25|Adds Regent 25,
14571 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
14573 regent40|Adds Regent 40,
14575 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
14576 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
14577 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
14578 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
14579 smul=\E0`, use=regent25,
14580 regent40+|Adds Regent 40+,
14581 is2=\EB, use=regent40,
14582 # It uses a different code for mapping acs vs dim/blink.
14583 regent60|regent200|adds200|Adds Regent 60,
14584 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
14585 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
14586 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
14587 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
14588 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
14590 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
14591 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
14592 viewpoint|addsviewpoint|adds viewpoint,
14595 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
14596 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
14597 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
14598 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
14599 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
14600 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
14601 # Some viewpoints have bad ROMs that foo up on ^O
14602 screwpoint|adds viewpoint with ^O bug,
14603 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
14605 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
14606 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
14607 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
14608 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
14609 # invis=01000100 and %c is the logical or of desired attributes.
14610 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
14612 # Update by TD - 2004:
14614 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
14616 # COMMANDS ASCII CODE
14618 # Address, Absolute ESC,=,row,column
14620 # Aux Port Enable ESC,@
14621 # Aux Port Disable ESC,A
14625 # Cursor forward FF
14628 # Cursor suppress ETB
14629 # Cursor enable CAN
14630 # Erase to end of line ESC,T
14631 # Erase to end of page ESC,Y
14634 # Keyboard unlock SO
14635 # Read current cursor position ESC,?
14636 # Set Attribute ESC,0,x (see below for values of x)
14637 # Tag bit reset ESC,(
14638 # Tag bit set ESC,)
14639 # Transparent Print on ESC,3
14640 # Transparent Print off ESC,4
14646 # Half Intensity A 0101
14648 # Half Intensity Blinking C 0103
14649 # Reverse Video P 0120
14650 # Reverse Video Half Intensity Q 0121
14651 # Reverse Video Blinking R 0122
14652 # Reverse Video Half Intensity
14654 # Underlined ` 0140
14655 # Underlined Half Intensity a 0141
14656 # Underlined Blinking b 0142
14657 # Underlined Half Intensity
14659 # Video suppress D 0104
14660 vp3a+|viewpoint3a+|adds viewpoint 3a+,
14662 cols#80, it#8, lines#24,
14663 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
14664 cub1=^H, cud1=\n, cuf1=^L,
14665 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
14666 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
14667 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
14668 nel=\r\n, rev=\E0P\E), rmso=\E(,
14669 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
14670 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
14671 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
14672 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
14673 vp60|viewpoint60|addsvp60|adds viewpoint60,
14676 # adds viewpoint 90 - from cornell
14677 # Note: emacs sends ei occasionally to insure the terminal is out of
14678 # insert mode. This unfortunately puts the viewpoint90 IN insert
14679 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
14680 # - :ei=:im=: must be present in the termcap translation.)
14681 # - <xhp> indicates glitch that attributes stick to location
14682 # - <msgr> means it's safe to move in standout mode
14683 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
14685 # Function key and label capabilities merged in from SCO.
14686 vp90|viewpoint90|adds viewpoint 90,
14687 OTbs, bw, msgr, xhp,
14689 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
14690 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
14691 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
14692 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
14693 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
14694 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14695 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
14696 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
14697 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
14698 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
14699 # Note: if return acts weird on a980, check internal switch #2
14700 # on the top chip on the CONTROL pc board.
14701 adds980|a980|adds consul 980,
14704 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
14705 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
14706 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
14707 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
14708 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
14710 #### C. Itoh Electronics
14712 # As of 1995 these people no longer make terminals (they're still in the
14713 # printer business). Their terminals were all clones of the DEC VT series.
14714 # They're located in Orange County, CA.
14717 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
14718 # the delay times and do an auto tab set rather than the indirect
14719 # file used in vt100.
14720 cit80|cit-80|citoh 80,
14723 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14724 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
14725 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
14726 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
14727 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
14728 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
14729 cit101|citc|C.itoh fast vt100,
14732 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
14733 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14734 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14735 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
14736 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
14737 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14738 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14739 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
14741 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
14742 # The following termcap entry was created from the Callan cd100 entry. The
14743 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
14744 # full selection of combinations of reverse video, underline, and blink.
14745 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
14746 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
14747 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
14748 cit101e|C. Itoh CIT-101e,
14749 OTbs, OTpt, am, mir, msgr,
14750 cols#80, it#8, lines#24,
14751 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
14752 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
14753 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
14754 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
14755 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
14756 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
14757 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
14758 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
14759 smkx=\E=, smso=\E[7m, smul=\E[4m,
14760 # From: David S. Lawyer, June 1997:
14761 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
14762 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
14763 # late 1980's CIT Terminals went out of business.
14764 # There is no need to use the initialization string is=... (by invoking
14765 # tset or setterm etc.) provided that the terminal has been manually set
14766 # up (and the setup saved with ^S) to be compatible with this termcap. To be
14767 # compatible it should be in ANSI mode (not VT52). A set-up that
14768 # works is to set all the manually settable stuff to factory defaults
14769 # by pressing ^D in set-up mode. Then increase the brightness with the
14770 # up-arrow key since the factory default will likely be dim on an old
14771 # terminal. Then change any options you want (provided that they are
14772 # compatible with the termcap). For my terminal I set: Screen
14773 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
14774 # on. I also set up mine for parity (but you may not need it). Then
14775 # save the setup with ^S.
14776 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
14777 cit101e-rv|Citoh CIT-101e (sets reverse video),
14778 am, eo, mir, msgr, xenl, xon,
14779 cols#80, it#8, lines#24,
14780 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14781 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
14782 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14783 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14784 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14785 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14786 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14787 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14788 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
14789 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
14790 B\E[m\E[20l\E[1;24r\E[24;1H,
14791 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14792 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
14793 rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
14794 rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
14795 smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
14796 smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
14797 u8=\E[?6c, u9=\E[c, use=ecma+index,
14798 cit101e-n|CIT-101e w/o am,
14800 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14802 cit101e-132|CIT-101e with 132 cols,
14804 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
14805 cit101e-n132|CIT-101e with 132 cols w/o am,
14808 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14810 # CIE Terminals CIT-500 from BRL
14811 # The following SET-UP modes are assumed for normal operation:
14812 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
14813 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
14814 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
14815 # Other SET-UP modes may be set for operator convenience or communication
14817 # Hardware tabs are assumed to be set every 8 columns; they can be set up
14818 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
14819 # "stty ixon -ixany" to enable DC3/DC1 flow control!
14820 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
14821 cit500|CIE Terminals CIT-500,
14822 OTbs, OTpt, mir, msgr, xon,
14823 OTkn#10, cols#80, it#8, lines#64, vt#3,
14824 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14825 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
14826 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
14827 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14828 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14829 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
14830 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
14831 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
14832 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
14833 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
14834 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
14835 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
14836 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
14837 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
14838 rmso=\E[m, rmul=\E[m,
14839 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
14840 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
14841 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14843 # C. Itoh printers begin here
14844 citoh|ci8510|8510|c.itoh 8510a,
14847 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
14848 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
14850 citoh-pica|citoh in pica,
14851 is1=\EN, use=citoh,
14852 citoh-elite|citoh in elite,
14855 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14858 citoh-comp|citoh in compressed,
14861 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14862 \,097\,105\,113\,121\,129.,
14864 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
14865 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
14867 is1=\EP, use=citoh,
14868 citoh-6lpi|citoh in 6 lines per inch mode,
14869 is3=\EA, use=citoh,
14870 citoh-8lpi|citoh in 8 lines per inch mode,
14872 is3=\EB, use=citoh,
14874 #### Control Data (cdc)
14877 cdc456|cdc 456 terminal,
14880 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14881 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
14882 el=^V, home=^Y, il1=\EL, ind=\n,
14884 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
14888 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14889 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14890 kcuu1=^W, khome=^Y,
14891 cdc721ll|CDC Viking with long lines,
14893 cols#132, lines#24,
14894 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14895 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14896 kcuu1=^W, khome=^Y,
14897 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
14901 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14902 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
14903 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
14905 # The following switch/key settings are assumed for normal operation:
14906 # 96 chars SCROLL FULL duplex not BLOCK
14907 # Other switches may be set according to communication requirements.
14908 # Insert/delete-character cannot be used, as the whole display is affected.
14909 # "so" & "se" are commented out until jove handles "sg" correctly.
14912 OTkn#10, cols#80, lines#24,
14913 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14914 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
14915 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
14916 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
14917 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
14918 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
14919 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
14920 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
14923 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
14925 # Part of the long initialization string defines the "DOWN" key to the left
14926 # of the tab key to send an ESC. The real ESC key is positioned way out
14929 # The termcap won't work in 132 column mode due to the way it it moves the
14930 # cursor. Termcap doesn't have the capability (as far as I could tell) to
14931 # handle the 721 in 132 column mode.
14933 # (cdc721: changed :ri: to :sr: -- esr)
14934 cdc721-esc|Control Data 721,
14935 OTbs, OTpt, am, bw, msgr, xon,
14936 OTkn#10, cols#80, it#8, lines#30,
14937 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
14938 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
14939 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
14940 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
14941 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
14942 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
14943 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
14945 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
14946 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
14947 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
14948 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
14949 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
14954 # Getronics is a Dutch electronics company that at one time was called
14955 # `Geveke' and made async terminals; but (according to the company itself!)
14956 # they've lost all their documentation on the command set. The hardware
14957 # documentation suggests the terminals were actually manufactured by a
14958 # Taiwanese electronics company named Cal-Comp. There are known
14959 # to have been at least two models, the 33 and the 50.
14962 # The 50 seems to be a top end vt220 clone, with the addition of a higher
14963 # screen resolution, a larger screen, at least 1 page of memory above and
14964 # below the screen, apparently pages of memory right and left of the screen
14965 # which can be panned, and about 75 function keys (15 function keys x normal,
14966 # shift, control, func A, func B). It also has more setup possibilities than
14967 # the vt220. The monitor case is dated November 1978 and the keyboard case is
14970 # The vt100 emulation works as is. The entry below describes the rather
14971 # non-conformant (but more featureful) ANSI mode.
14973 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
14974 visa50|geveke visa 50 terminal in ansi 80 character mode,
14977 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14978 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
14979 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14980 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14981 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14982 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
14983 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
14984 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
14985 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14986 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
14987 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
14988 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
14989 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
14990 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
14991 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
14992 lf3=A insert line, lf4=A delete line, lf5=A clear,
14993 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
14994 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
14995 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
14996 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
14997 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
15000 #### Human Designed Systems (Concept)
15002 # Human Designed Systems
15004 # King of Prussia, PA 19406
15005 # Vox: (610)-277-8300
15006 # Fax: (610)-275-5739
15007 # Net: support@hds.com
15009 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
15010 # the character-terminal business now (1995) and making X terminals. In
15011 # particular, the whole `Concept' line described here was discontinued long
15015 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
15016 # Extensive changes to c108 by arpavax:eric Feb 1982
15017 # Some unknown person at SCO then translated it to terminfo.
15019 # There seem to be a number of different versions of the C108 PROMS
15020 # (with bug fixes in its Z-80 program).
15022 # The first one that we had would lock out the keyboard of you
15023 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
15024 # Try that on your C108 and see if it sends a ^S when you type it.
15025 # If so, you have an old version of the PROMs.
15027 # You should configure the C108 to send ^S/^Q before running this.
15028 # It is much faster (at 9600 baud) than the c100 because the delays
15030 # new status line display entries for c108-8p:
15031 # <is3> - init str #3 - setup term for status display -
15032 # set programmer mode, select window 2, define window at last
15033 # line of memory, set bkgnd stat mesg there, select window 0.
15035 # <tsl> - to status line - select window 2, home cursor, erase to
15036 # end-of-window, 1/2 bright on, goto(line#0, col#?)
15038 # <fsl> - from status line - 1/2 bright off, select window 0
15040 # <dsl> - disable status display - set bkgnd status mesg with
15043 # There are probably more function keys that should be added but
15044 # I don't know what they are.
15046 # No delays needed on c108 because of ^S/^Q handshaking
15048 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
15049 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
15051 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
15052 c108-4p|concept108-4p|concept 108 w/4 pages,
15053 OTbs, eslok, hs, xon,
15055 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
15056 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
15057 %>%t\001%{96}%-%;%{32}%+%c,
15058 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
15059 ind=\n, is1=\EK\E!\E F,
15060 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
15061 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
15062 smcup=\EU\Ev 8p\Ep\r\E\025,
15063 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
15064 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
15065 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
15067 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
15068 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
15070 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
15072 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
15073 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
15076 # These have only window relative cursor addressing, not screen
15077 # relative. To get it to work right here, smcup/rmcup (which
15078 # were invented for the concept) lock you into a one page
15079 # window for screen style programs.
15081 # To get out of the one page window, we use a clever trick:
15082 # we set the window size to zero ("\Ev " in rmcup) which the
15083 # terminal recognizes as an error and resets the window to all
15086 # This trick works on c100 but does not on c108, sigh.
15088 # Some tty drivers use cr3 for concept, others use nl3, hence
15089 # the delays on cr and ind below. This padding is only needed at
15090 # 9600 baud and up. One or the other is commented out depending on
15091 # local conventions.
15093 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
15094 # less than 6 but more than 2 will work.
15096 # Note: can't use function keys f7-f10 because they are
15097 # indistinguishable from arrow keys (!), also, del char and
15098 # clear eol use xon/xoff so they probably won't work very well.
15100 # Also note that we don't define insrt/del char/delline/eop/send
15101 # because they don't transmit unless we reset them - I figured
15102 # it was a bad idea to clobber their definitions.
15104 # The <mc5> sequence changes the escape character to ^^ so that
15105 # escapes will be passed through to the printer. Only trouble
15106 # is that ^^ won't be - ^^ was chosen to be unlikely.
15107 # Unfortunately, if you're sending raster bits through to be
15108 # plotted, any character you choose will be likely, so we lose.
15110 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
15111 # cannot be # in is2 because it will hang a c100 with no printer
15113 c100|concept100|concept|c104|c100-4p|hds concept 100,
15114 OTbs, am, eo, mir, ul, xenl,
15115 cols#80, lines#24, pb#9600, vt#8,
15116 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
15117 cub1=^H, cud1=\n, cuf1=\E=,
15118 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
15119 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
15120 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
15121 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
15123 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
15124 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
15125 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
15126 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
15127 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
15128 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
15129 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
15130 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
15131 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
15132 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
15133 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
15134 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
15135 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
15136 smso=\ED, smul=\EG,
15137 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
15138 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
15139 smso=\EE, use=c100,
15140 oc100|oconcept|c100-1p|old 1 page concept 100,
15144 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
15145 # Lots of notes, originally inline, but ncurses doesn't grok that.
15147 # am: not available in power on mode, but turned on with \E[=107;207h in
15148 # is2=. Also, \E=124l in is2= could have been used to prevent needing
15149 # to specify xenl:, but that would have rendered the last space on the
15150 # last line useless.
15151 # bw: Not available in power on mode, but turned on with \E[=107;207h in
15153 # clear: Could be done with \E[2J alone, except that vi (and probably most
15154 # other programs) assume that this also homes the cursor.
15155 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
15156 # scroll the window, and go back to window 1.
15157 # is2: the string may cause a warning to be issued by tic that it
15158 # found a very long line and that it suspects that a comma is missing
15159 # somewhere. This warning can be ignored (unless it comes up more than
15160 # once). The initialization string contains the following commands:
15162 # [Setup mode items changed from factory defaults:]
15163 # \E)0 set alternate character set to
15165 # ^O set character set to default
15166 # [In case it wasn't]
15167 # \E[m turn off all attributes
15168 # [In case they weren't off]
15169 # \E[=107; cursor wrap and
15170 # 207h character wrap on
15171 # \E[90;3u set Fkey definitions to "transmit"
15173 # \E[92;3u set cursor key definitions to
15174 # "transmit" defaults
15175 # \E[43;1u set shift F13 to transmit...
15177 # \E[44;1u set shift F14 to transmit...
15179 # \E[45;1u set shift F15 to transmit...
15181 # \E[46;1u set shift F16 to transmit...
15183 # \E[200;1u set shift up to transmit...
15185 # \E[201;1u set shift down to transmit...
15187 # \E[202;1u set shift right to transmit...
15189 # \E[203;1u set shift left to transmit...
15191 # \E[204;1u set shift home to transmit...
15193 # \E[212;1u set backtab to transmit...
15195 # \E[213;1u set shift backspace to transmit...
15197 # \E[214;1u set shift del to transmit...
15199 # [Necessary items not mentioned in setup mode:]
15200 # \E[2!w move to window 2
15201 # \E[25;25w define window as line 25 of memory
15202 # \E[!w move to window 1
15203 # \E[2*w show current line of window 2 as
15205 # \E[2+x set meta key to use high bit
15206 # \E[;3+} move underline to bottom of character
15208 # All Fkeys are set to their default transmit definitions with \E[90;3u
15209 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
15210 # setting MUST be redefined or deactivated, because the default is
15211 # contained in almost all of this terminal's Fkey strings! If for some
15212 # reason "quit" cannot be altered, the Fkeys can, but it would be
15213 # necessary to change ^| to ^] in all of these definitions, and add
15214 # \E[2;029!t to is2.
15215 # lines: is set to 24 because this terminal refuses to treat the 25th
15217 # ll: Not available in power on mode, but turned on with \E[=107;207h in
15219 # lm: Pointless, given that this definition locks a single screen of
15220 # memory into view, but what the hey...
15221 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
15222 # other attributes alone), but some programs expect this to turn off
15224 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
15225 # attributes alone), but some programs expect this to turn off
15227 # sgr: Attributes are set on this terminal with the string \E[ followed by
15228 # a list of attribute code numbers (in decimal, separated by
15229 # semicolons), followed by the character m. The attribute code
15232 # 2 for dim (which is ignored in power on mode);
15236 # 8 for not displayable; and
15237 # =99 for protected (except that there are strange side
15238 # effects to protected characters which make them inadvisable).
15239 # The mapping of terminfo parameters to attributes is as follows:
15240 # %p1 (standout) = bold and inverse together;
15241 # %p2 (underline) = underline;
15242 # %p3 (reverse) = inverse;
15243 # %p4 (blink) = blinking;
15244 # %p5 (dim) is ignored;
15245 # %p6 (bold) = bold;
15246 # %p7 (invisible) = not displayable;
15247 # %p8 (protected) is ignored; and
15248 # %p9 (alt char set) = alt char set.
15249 # The code to do this is:
15251 # %?%p1%p6%O IF (standout; bold) OR
15252 # %t;1 THEN OUTPUT ;1
15254 # %?%p2 IF underline
15255 # %t;4 THEN OUTPUT ;4
15258 # %t;5 THEN OUTPUT ;5
15260 # %?%p1%p3%O IF (standout; reverse) OR
15261 # %t;7 THEN OUTPUT ;7
15263 # %?%p7 IF invisible
15264 # %t;8 THEN OUTPUT ;8
15267 # %?%p9 IF altcharset
15268 # %t^N THEN OUTPUT ^N
15269 # %e^O ELSE OUTPUT ^O
15271 # sgr0: Everything is turned off (including alternate character set), since
15272 # there is no way of knowing what it is that the program wants turned
15274 # smul: The "underline" attribute is reconfigurable to an overline or
15275 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
15276 # bottom of the character cell. This was done to allow for more readable
15277 # underlined characters, and to be able to distinguish between an
15278 # underlined space, an underscore, and an underlined underscore.
15279 # xenl: Terminal can be configured to not need this, but this "glitch"
15280 # behavior is actually preferable with autowrap terminals.
15282 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
15283 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
15284 # string modifies the 'O' in kf43 to kf46 to a '$'.
15286 # kcbt was originally ^I but redefined in is2=.
15287 # kHOM was \E[H originally but redefined in is2=, as were a number of
15289 # kDC was originally \177 but redefined in is2=.
15291 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
15292 # tsl: Go to window 2, then do an hpa=.
15294 #------- flash=\E[8;3!}^G\E[3;3!}
15295 #------- flash=\E[?5h$<100>\E[?5l
15296 # There are two ways to flash the screen, both of which have their drawbacks.
15297 # The first is to set the bell mode to video, transmit a bell character, and
15298 # set the bell mode back - but to what? There is no way of knowing what the
15299 # user's old bell setting was before we messed with it. Worse, the command to
15300 # set the bell mode also sets the key click volume, and there is no way to say
15301 # "leave that alone", or to know what it's set to, either.
15302 # The second way to do a flash is to set the screen to inverse video, pad for a
15303 # tenth of a second, and set it back - but like before, there's no way to know
15304 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
15305 # it that way. The point is moot anyway, since vi (and probably other
15306 # programs) assume that by defining flash=, you want the computer to use it
15307 # INSTEAD of bel=, rather than as a secondary type of signal.
15309 #------- cvvis=\E[+{
15310 # The is the power on setting, which is also as visible as the cursor
15312 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
15313 # Windowing is possible, but not defined here because it is also used to
15314 # emulate status line functions. Allowing a program to set a window could
15315 # clobber the status line or render it unusable. There is additional memory,
15316 # but screen scroll functions are destructive and do not make use of it.
15318 #------- dim= Not available in power on mode.
15319 # You have a choice of defining low intensity characters as "half bright" and
15320 # high intensity as "normal", or defining low as "normal" and high as "bold".
15321 # No matter which you choose, only one of either "half bright" or "bold" is
15322 # available at any time, so taking the time to override the default is
15325 #------- prot=\E[=0;99m
15326 # Not defined, because it appears to have some strange side effects.
15327 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
15328 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
15329 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
15330 # Available, but making them available to programs is inadvisable.
15331 # The code to do this is:
15332 # %?%p1%{24}%< IF ((key; 24) <;
15333 # %p1%{30}%> ((key; 30) >;
15334 # %p1%{54}%< (key; 54) <
15337 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
15338 # %t\E[ THEN OUTPUT \E[
15339 # %p1%d OUTPUT (key) as decimal
15340 # [next line applies to pfx only]
15344 # %p2%s OUTPUT (string) as string
15346 # [DEL chosen as delimiter, but could be any character]
15347 # [implied: ELSE do nothing]
15351 # Not defined since anything it might do could be done faster and easier with
15352 # either Meta-Shift-Reset or the main power switch.
15354 #------- smkx=\E[1!z
15355 #------- rmkx=\E[!z
15356 # These sequences apply to the cursor and setup keys only, not to the
15357 # numeric keypad. But it doesn't matter anyway, since making these
15358 # available to programs is inadvisable.
15359 # For the key definitions below, all sequences beginning with \E$ are
15360 # custom and programmed into the terminal via is2. \E$ also has no
15361 # meaning to any other terminal.
15363 #------- cmdch=\E[;%p1%d!t
15364 # Available, but making it available to programs is inadvisable.
15365 #------- smxon=\E[1*q
15366 # Available, but making it available to programs is inadvisable.
15367 # Terminal will send XON/XOFF on buffer overflow.
15368 #------- rmxon=\E[*q
15369 # Available, but making it available to programs is inadvisable.
15370 # Terminal will not notify on buffer overflow.
15371 #------- smm=\E[2+x
15373 # Available, but making them available to programs is inadvisable.
15376 # It's not made clear in the manuals, but based on other ansi/vt type
15377 # terminals, it's a good guess that this terminal is capable of both
15378 # "transparent print" (which doesn't copy data to the screen, and
15379 # therefore needs mc5i: specified to say so) and "auxiliary print"
15380 # (which does duplicate printed data on the screen, in which case mc4=
15381 # and mc5= should use the \E[?4i and \E[?5i strings instead).
15383 hds200|Human Designed Systems HDS200,
15384 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
15385 cols#80, it#8, lines#24, lm#0,
15386 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15387 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
15388 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
15389 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15390 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15391 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15392 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15393 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
15394 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
15395 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15397 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
15398 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
15399 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
15400 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
15401 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
15402 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
15403 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
15404 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15405 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
15406 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
15407 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
15408 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
15409 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
15410 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
15411 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
15412 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
15413 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
15414 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
15415 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
15416 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
15417 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
15418 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
15419 rmul=\E[m\017, sc=\E7,
15420 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
15421 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
15422 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
15423 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
15424 vpa=\E[%i%p1%dd, use=ansi+pp,
15426 # <ht> through <el> included to specify padding needed in raw mode.
15427 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
15428 avt-ns|concept avt no status line,
15429 OTbs, am, eo, mir, ul, xenl, xon,
15430 cols#80, it#8, lines#24, lm#192,
15431 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15432 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
15433 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15434 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
15435 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15436 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
15437 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
15438 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
15439 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
15440 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
15441 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
15442 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
15444 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15445 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15446 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
15447 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
15448 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
15449 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
15450 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
15451 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
15453 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15454 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
15456 sgr0=\E[m\016$<1>, smacs=\017$<1>,
15457 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
15458 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15459 vpa=\E[%p1%{1}%+%dd,
15460 avt-rv-ns|concept avt in reverse video mode/no status line,
15461 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
15463 avt-w-ns|concept avt in 132 column mode/no status line,
15464 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
15466 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
15467 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
15468 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
15470 # Concept AVT with status line. We get the status line using the
15471 # "Background status line" feature of the terminal. We swipe the
15472 # first line of memory in window 2 for the status line, keeping
15473 # 191 lines of memory and 24 screen lines for regular use.
15474 # The first line is used instead of the last so that this works
15475 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
15476 # assumes an 8 page AVT but lm isn't currently used anywhere.)
15478 avt+s|concept avt status line changes,
15481 dsl=\E[0*w, fsl=\E[1;1!w,
15482 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
15483 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
15484 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
15485 avt|avt-s|concept-avt|avt w/80 columns,
15486 use=avt+s, use=avt-ns,
15487 avt-rv|avt-rv-s|avt reverse video w/sl,
15488 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
15489 use=avt+s, use=avt-ns,
15490 avt-w|avt-w-s|concept avt 132 cols+status,
15491 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
15492 use=avt+s, use=avt-ns,
15493 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
15494 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
15495 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
15497 #### Contel Business Systems.
15500 # Contel c300 and c320 terminals.
15501 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
15503 cols#80, lines#24, xmc#1,
15504 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15505 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15506 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15507 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15508 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
15509 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15510 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15511 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
15512 # Contel c301 and c321 terminals.
15513 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
15514 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
15517 #### Data General (dg)
15519 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
15520 # the terminals group at Data General was shut down in 1991; all these
15521 # terminals have thus been discontinued.
15523 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
15524 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
15525 # sequentially, first the unmodified key codes are listed as F1 through F15.
15526 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
15527 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
15528 # F46 through F60. This is done in the private "includes" below whose names
15529 # start with "dgkeys+".
15531 # DG terminals generally support 8 bit characters. For each of these terminals
15532 # two descriptions are supplied:
15533 # 1) A default description for 8 bits/character communications, which
15534 # uses the default DG international character set and keyboard codes.
15535 # 2) A description with suffix "-7b" for 7 bits/character communications.
15536 # This description must use the NON-DEFAULT native keyboard language.
15538 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
15539 # Ctrl/Shift fdkeys (kf34-kf44).
15541 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
15542 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
15543 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
15544 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
15545 kf11=\233011z, kf12=\233012z, kf13=\233013z,
15546 kf14=\233014z, kf15=\233000z, kf16=\233101z,
15547 kf17=\233102z, kf18=\233103z, kf19=\233104z,
15548 kf2=\233002z, kf20=\233105z, kf21=\233106z,
15549 kf22=\233107z, kf23=\233108z, kf24=\233109z,
15550 kf25=\233110z, kf26=\233111z, kf27=\233112z,
15551 kf28=\233113z, kf29=\233114z, kf3=\233003z,
15552 kf30=\233100z, kf31=\233201z, kf32=\233202z,
15553 kf33=\233203z, kf34=\233204z, kf35=\233205z,
15554 kf36=\233206z, kf37=\233207z, kf38=\233208z,
15555 kf39=\233209z, kf4=\233004z, kf40=\233210z,
15556 kf41=\233211z, kf42=\233212z, kf43=\233213z,
15557 kf44=\233214z, kf45=\233200z, kf46=\233301z,
15558 kf47=\233302z, kf48=\233303z, kf49=\233304z,
15559 kf5=\233005z, kf50=\233305z, kf51=\233306z,
15560 kf52=\233307z, kf53=\233308z, kf54=\233309z,
15561 kf55=\233310z, kf56=\233311z, kf57=\233312z,
15562 kf58=\233313z, kf59=\233314z, kf6=\233006z,
15563 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
15564 khome=\233H, kprt=\233i,
15566 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
15567 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
15568 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15569 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
15570 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
15571 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
15572 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
15573 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
15574 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
15575 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
15576 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
15577 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
15578 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
15579 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
15580 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
15581 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
15582 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
15583 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
15584 kf9=\E[009z, khome=\E[H, kprt=\E[i,
15586 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
15587 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
15588 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
15589 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
15590 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
15591 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
15592 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
15593 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
15594 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
15595 kf8=^^x, kf9=^^y, khome=^H,
15597 dgkeys+15|Private entry describing 15 DG mode special keys,
15598 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
15599 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
15600 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
15601 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
15602 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
15603 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
15604 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
15605 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
15606 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
15607 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
15608 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
15611 # Data General color terminals use the "Tektronix" color model. The total
15612 # number of colors varies with the terminal model, as does support for
15613 # attributes used in conjunction with color.
15615 # Removed u7, u8 definitions since they conflict with tack:
15616 # Preserve user-defined colors in at least some cases.
15618 # Default is ACM mode.
15619 # u8=^^F}20^^Fi^^F}21,
15621 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
15623 colors#16, ncv#53, pairs#0x100,
15625 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15626 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15627 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15628 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15629 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15631 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
15634 # Video attributes are coordinated using static variables set by "sgr", then
15635 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
15636 # (D=dim, U=underline, B=blink, R=reverse.)
15637 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
15639 colors#8, ncv#16, pairs#64,
15640 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
15641 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15642 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15643 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15644 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15645 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15646 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15648 dg+color|Color info for Data General D470C terminals in ANSI mode,
15649 colors#16, ncv#53, pairs#0x100,
15650 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15651 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15653 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15654 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15656 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15657 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15659 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15660 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15664 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
15666 colors#8, ncv#16, pairs#64,
15668 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15670 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15672 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15674 dgmode+color|Color info for Data General D470C terminals in DG mode,
15675 colors#16, pairs#0x100,
15676 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15677 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15678 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15679 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15682 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
15684 colors#52, ncv#53, pairs#26,
15685 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
15686 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
15687 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
15689 oc=\036RG01A00FF00000000\036RG01B00000000FF00
15690 \036RG01C007F00000000\036RG01D000000007F00,
15691 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
15692 scp=\036RG2%p1%02X,
15694 # Colors are in the order: normal, reverse, dim, dim + reverse.
15695 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
15697 colors#52, ncv#53, pairs#26,
15698 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
15699 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
15700 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
15701 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
15702 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
15703 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
15704 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
15705 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
15706 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
15707 0000000\036RG01=000000007?00,
15708 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
15709 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
15711 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
15712 # Initialization string 1 sets:
15713 # ^R - vertical scrolling enabled
15714 # ^C - blinking enabled
15715 dg-generic|Generic Data General terminal in DG mode,
15718 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15719 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
15720 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
15721 smul=^T, use=dgkeys+11,
15723 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
15724 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
15725 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
15726 # maybe they were originally nuls (which would fit).
15728 dg200|data general dasher 200,
15731 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15732 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
15733 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
15734 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
15735 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
15738 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
15739 dg210|dg-ansi|Data General 210/211,
15742 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
15743 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15744 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15745 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
15746 smso=\E[7;m, smul=\E[4;m,
15747 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
15748 # courtesy of Carlos Rucalde of Vantage Software, Inc.
15749 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
15750 # I suspect the d200 function keys actually work on the dg211, check it out.)
15751 dg211|Data General d211,
15752 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
15753 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
15754 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
15756 # dg450 from Cornell (not official)
15757 dg450|dg6134|data general 6134,
15758 cub1@, cuf1=^X, use=dg200,
15761 # Note: lesser Dasher terminals will not work with vi because vi insists upon
15762 # having a command to move straight down from any position on the bottom line
15763 # and scroll the screen up, or a direct vertical scroll command. The 460 and
15764 # above have both, the D210/211, for instance, has neither. We must use ANSI
15765 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
15766 # backspace on all terminals. This is not so in DG mode.
15767 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
15768 # grounds that there is no matching ":ml:"
15769 dg460-ansi|Data General Dasher 460 in ANSI-mode,
15770 OTbs, am, msgr, ul,
15771 cols#80, it#8, lines#24,
15772 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
15773 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
15774 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15775 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
15776 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15777 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
15778 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
15779 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
15780 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
15781 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
15782 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
15784 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
15785 u7=\E[6n, u8=\E[5n, u9=\E[0n,
15786 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
15787 # Data General 605x
15788 # Ought to work for a Model 6242, Type D210 as well as a 605x.
15789 # Note that the cursor-down key transmits ^Z. Job control users, beware!
15790 # This also matches a posted description of something called a `Dasher 100'
15791 # so there's a dg100 alias here.
15792 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
15793 dg6053-old|dg100|data general 6053,
15796 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
15797 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
15798 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
15799 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
15800 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
15801 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
15804 # (Some performance can be gained over the generic DG terminal type)
15805 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
15807 home=\020\0\0, ll=^P\0^W, use=dg-generic,
15809 # Like 6053, but adds reverse video and more keypad and function keys.
15810 d200|d200-dg|Data General DASHER D200,
15811 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
15812 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15813 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
15814 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
15816 # DASHER D210 series terminals in ANSI mode.
15817 # Reverse video, no insert/delete character/line, 7 bits/character only.
15819 # Initialization string 1 sets:
15820 # <0 - scrolling enabled
15821 # <1 - blink enabled
15822 # <4 - print characters regardless of attributes
15823 d210|d214|Data General DASHER D210 series,
15826 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
15827 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15828 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15829 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
15830 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
15831 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
15832 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
15834 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
15836 # DASHER D210 series terminals in DG mode.
15837 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
15838 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
15840 ed=^^FF, use=d200-dg,
15842 # DASHER D211 series terminals in ANSI mode.
15843 # Like the D210, but with 8-bit characters and local printer support.
15845 # Initialization string 2 sets:
15847 # 2;1 - 8 bit operations
15848 # 1;1 - 8 bit (international) keyboard language
15849 # \E(B - default primary character set (U.S. ASCII)
15850 # \E)4 - default secondary character set (international)
15851 # ^O - primary character set
15853 d211|d215|Data General DASHER D211 series,
15855 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
15858 # Initialization string 2 sets:
15860 # 2;0 - 7 bit operations
15861 # 1;0 - 7 bit (native) keyboard language
15862 # \E(0 - default character set (the keyboard native language)
15863 # ^O - primary character set
15864 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
15866 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
15868 # Like the D210 series, but adds support for 8-bit characters.
15870 # Reset string 2 sets:
15871 # ^^N - secondary character set
15872 # ^^FS0> - 8 bit international character set
15873 # ^^O - primary character set
15874 # ^^FS00 - default character set (matching the native keyboard language)
15876 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
15878 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
15880 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
15883 # Enhanced DG mode with changes to be more UNIX compatible.
15884 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
15887 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
15888 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
15889 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
15890 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
15891 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
15892 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
15893 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
15894 rs2=\036N\036FS0E\036O\036FS00,
15895 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
15896 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
15898 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
15899 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
15900 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
15902 is3=^^Fz2, use=d216+,
15904 d217-unix|Data General DASHER D217 in DG-UNIX mode,
15906 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
15909 # DASHER D220 color terminal in ANSI mode.
15910 # Like the D470C but with fewer colors and screen editing features.
15912 # Initialization string 1 sets:
15914 # <0 - scrolling enabled
15915 # <1 - blink enabled
15916 # <4 - print characters regardless of attributes
15917 # \E[m - all attributes off
15918 # Reset string 1 sets:
15919 # \Ec - initial mode defaults (RIS)
15921 d220|Data General DASHER D220,
15923 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15924 use=dg+color8, use=d470c,
15926 d220-7b|Data General DASHER D220 in 7 bit mode,
15928 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15929 use=dg+color8, use=d470c-7b,
15931 # Initialization string 3 sets:
15932 # - default cursor (solid rectangle)
15933 # Reset string 2 sets:
15934 # ^^N - secondary character set
15935 # ^^FS0> - 8 bit international character set
15936 # ^^O - primary character set
15937 # ^^FS00 - default character set (matching the native keyboard language)
15939 d220-dg|Data General DASHER D220 color terminal in DG mode,
15941 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
15942 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
15945 # DASHER D230C color terminal in ANSI mode.
15946 # Like the D220 but with minor ANSI compatibility improvements.
15948 d230c|d230|Data General DASHER D230C,
15949 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
15950 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
15951 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
15952 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
15953 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
15954 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
15955 smul=\E[4;50m, use=dgkeys+7b, use=d220,
15957 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
15960 # DASHER D400/D450 series terminals.
15961 # These add intelligent features like insert/delete to the D200 series.
15963 # Initialization string 2 sets:
15964 # ^^FQ2 - default cursor (solid rectangle)
15965 # ^^FW - character protection disabled
15966 # ^^FJ - normal (80 column) mode
15967 # ^^F\^ - horizontal scrolling enabled (for alignment)
15968 # ^^FX004? - margins at columns 0 and 79
15969 # ^^F] - horizontal scrolling disabled
15970 # ^^O - primary character set
15971 # ^^FS00 - default character set (the keyboard native language)
15972 # - (should reset scrolling regions, but that glitches the screen)
15973 # Reset string 1 sets:
15974 # ^^FA - all terminal defaults except scroll rate
15975 # Reset string 2 sets:
15976 # ^^F] - horizontal scrolling disabled
15977 # ^^FT0 - jump scrolling
15979 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
15981 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
15982 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
15983 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
15984 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
15986 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
15988 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15989 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
15990 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
15993 # DASHER D410/D460 series terminals in ANSI mode.
15994 # These add a large number of intelligent terminal features.
15996 # Initialization string 1 sets:
15998 # <0 - scrolling enabled
15999 # <1 - blink enabled
16000 # <2 - horizontal scrolling enabled (for alignment)
16001 # <4 - print characters regardless of attributes
16002 # \E[5;0v - normal (80 column) mode
16003 # \E[1;1;80w - margins at columns 1 and 80
16005 # 1 - print all characters even if protected
16006 # 6 - character protection disabled
16007 # <2 - horizontal scrolling disabled
16008 # - (should reset scrolling regions, but that glitches the screen)
16010 # Initialization string 2 sets:
16012 # 3;2 - default cursor (solid rectangle)
16013 # 2;1 - 8 bit operations
16014 # 1;1 - international keyboard language
16015 # \E(B - default primary character set (U.S. ASCII)
16016 # \E)4 - default secondary character set (international)
16017 # ^O - primary character set
16019 # Reset string 1 sets:
16020 # \Ec - initial mode defaults (RIS)
16021 # \E[<2h - horizontal scrolling disabled
16023 # Reset string 2 sets:
16025 # 4;0 - jump scrolling
16026 # 2;1 - 8 bit operations
16027 # 1;1 - 8 bit (international) keyboard language
16028 # \E(B - default primary character set (U.S. ASCII)
16029 # \E)4 - default secondary character set (international)
16031 d410|d411|d460|d461|Data General DASHER D410/D460 series,
16033 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
16034 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16035 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
16036 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
16037 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
16038 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
16039 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
16040 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
16041 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
16042 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
16044 # Initialization string 2 sets:
16046 # 3;2 - default cursor (solid rectangle)
16047 # 2;0 - 7 bit operations
16048 # 1;0 - 7 bit (native) keyboard language
16049 # \E(0 - default character set (the keyboard native language)
16050 # ^O - primary character set
16052 # Reset string 2 sets:
16054 # 4;0 - jump scrolling
16055 # 2;0 - 7 bit operations
16056 # 1;0 - 7 bit (native) keyboard language
16057 # \E(0 - default character set (the keyboard native language)
16059 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
16061 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
16062 rs2=\E[4;0;2;0;1;0v\E(0,
16063 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
16064 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
16065 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
16067 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
16069 enacs@, rmacs=\036FS00,
16070 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
16071 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
16073 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
16076 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
16078 # Initialization string 1 sets:
16080 # <0 - scrolling enabled
16081 # <1 - blink enabled
16082 # <2 - horizontal scrolling enabled (for alignment)
16083 # <4 - print characters regardless of attributes
16084 # \E[5;1v - compressed (135 column) mode
16085 # \E[1;1;126 - margins at columns 1 and 126
16087 # 1 - print all characters even if protected
16088 # 6 - character protection disabled
16089 # <2 - horizontal scrolling disabled
16090 # - (should reset scrolling regions, but that glitches the screen)
16092 # Reset string 1 sets:
16093 # \Ec - initial mode defaults (RIS)
16094 # \E[5;1v - compressed (135 column) mode
16095 # \E[1;1;126w - margins at columns 1 and 126
16096 # \E[<2h - horizontal scrolling disabled
16098 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
16100 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16101 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
16103 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
16105 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
16106 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
16108 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
16111 # These add intelligent features like scrolling regions.
16112 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
16113 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
16114 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
16115 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
16116 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
16118 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
16119 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
16120 vpa=\036FPFF%p1%2.2X,
16121 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
16122 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
16124 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
16126 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
16128 rs2=\036P@1\036FK\036FX0083,
16129 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
16130 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
16132 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
16135 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
16136 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
16138 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
16140 clear=\036FG\036PH, fsl=\036F}01\022,
16141 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
16142 tsl=\036F}00\036FP%p1%2.2X18\036PG,
16143 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
16144 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
16147 # Relative cursor motions are confined to the current window,
16148 # which is not what the scrolling region specification expects.
16149 # Thus, relative vertical cursor positioning must be deleted.
16150 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
16151 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
16153 cud1@, cuu1@, ll@, use=d462+,
16155 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
16157 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
16159 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
16161 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
16163 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
16166 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
16168 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
16170 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
16172 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
16174 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
16177 d430c-dg|d430-dg|Data General D430C in DG mode,
16178 use=d413-dg, use=dg+fixed,
16179 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
16180 use=d413-dg, use=dg+ccc,
16182 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
16183 use=d413-unix, use=dgunix+fixed,
16184 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
16185 use=d413-unix-w, use=dgunix+fixed,
16186 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
16187 use=d413-unix-25, use=dgunix+fixed,
16188 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
16189 use=d413-unix-s, use=dgunix+fixed,
16190 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
16191 use=d413-unix-sr, use=dgunix+fixed,
16192 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
16193 use=d413-unix, use=dgunix+ccc,
16194 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
16195 use=d413-unix-w, use=dgunix+ccc,
16196 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
16197 use=d413-unix-25, use=dgunix+ccc,
16198 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
16199 use=d413-unix-s, use=dgunix+ccc,
16200 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
16201 use=d413-unix-sr, use=dgunix+ccc,
16203 # DASHER D470C color terminal in ANSI mode.
16204 # Like the D460 but with 16 colors and without a compressed mode.
16206 # Initialization string 1 sets:
16208 # <0 - scrolling enabled
16209 # <1 - blink enabled
16210 # <2 - horizontal scrolling enabled (for alignment)
16211 # <4 - print characters regardless of attributes
16212 # \E[1;1;80w - margins at columns 1 and 80
16214 # 1 - print all characters even if protected
16215 # 6 - character protection disabled
16216 # <2 - horizontal scrolling disabled
16217 # - (should reset scrolling regions, but that glitches the screen)
16219 d470c|d470|Data General DASHER D470C,
16220 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
16221 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
16222 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
16223 use=dg+color, use=d460,
16225 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
16226 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
16227 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
16228 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
16229 use=dg+color, use=d460-7b,
16231 # Initialization string 2 sets:
16232 # ^^FQ2 - default cursor (solid rectangle)
16233 # ^^FW - character protection disabled
16234 # ^^F\^ - horizontal scrolling enabled (for alignment)
16235 # ^^FX004? - margins at columns 0 and 79
16236 # ^^F] - horizontal scrolling disabled
16237 # ^^O - primary character set
16238 # ^^FS00 - default character set (the keyboard native language)
16239 # - (should reset scrolling regions, but that glitches the screen)
16241 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
16242 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
16244 use=dgmode+color, use=d460-dg,
16246 # DASHER D555 terminal in ANSI mode.
16247 # Like a D411, but has an integrated phone.
16248 d555|Data General DASHER D555,
16250 d555-7b|Data General DASHER D555 in 7-bit mode,
16252 d555-w|Data General DASHER D555 in wide mode,
16254 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
16256 d555-dg|Data General DASHER D555 series in DG mode,
16259 # DASHER D577 terminal in ANSI mode.
16260 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
16261 d577|Data General DASHER D577,
16263 d577-7b|Data General DASHER D577 in 7-bit mode,
16265 d577-w|Data General DASHER D577 in wide mode,
16267 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
16270 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
16273 # DASHER D578 terminal.
16274 # Like a D577, but without compressed mode; like a D470C in this respect.
16276 # Initialization string 1 sets:
16278 # <0 - scrolling enabled
16279 # <1 - blink enabled
16280 # <2 - horizontal scrolling enabled (for alignment)
16281 # <4 - print characters regardless of attributes
16282 # \E[1;1;80w - margins at columns 1 and 80
16284 # 1 - print all characters even if protected
16285 # 6 - character protection disabled
16286 # <2 - horizontal scrolling disabled
16287 # - (should reset scrolling regions, but that glitches the screen)
16289 d578|Data General DASHER D578,
16290 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
16291 d578-7b|Data General DASHER D578 in 7-bit mode,
16292 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
16294 #### Datamedia (dm)
16296 # Datamedia was headquartered in Nashua, New Hampshire until it went
16297 # out of business in 1993, but the ID plates on the terminals referred
16298 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
16299 # manufacturer which threw out all information about the terminals.
16302 cs10|colorscan|Datamedia Color Scan 10,
16305 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16306 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16307 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16308 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
16309 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16310 cs10-w|Datamedia Color Scan 10 with 132 columns,
16312 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
16314 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
16315 dm1520|dm1521|datamedia 1520,
16317 cols#80, it#8, lines#24,
16318 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
16319 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16320 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
16322 # dm2500: this terminal has both <ich> and <smir>. Applications using
16323 # termcap/terminfo directly (rather than through ncurses) might be confused.
16324 dm2500|datamedia2500|datamedia 2500,
16327 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
16328 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
16329 dch1=\020\010\030\035$<10*>,
16330 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
16331 ich1=\020\034\030\035$<10*>,
16332 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
16333 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
16334 smdc=^P, smir=^P, smso=^N,
16335 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
16336 # also, has a meta-key.
16337 # From: <goldberger@su-csli.arpa>
16338 # (dmchat: ":MT:" changed to ":km:" -- esr)
16339 dmchat|dmchat version of datamedia 2500,
16341 dl1=\020\032\030\035$<2/>,
16342 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
16343 # (dm3025: ":MT:" changed to ":km:" -- esr)
16344 dm3025|datamedia 3025a,
16346 cols#80, it#8, lines#24,
16347 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16348 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
16349 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
16350 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
16351 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
16352 smir=\EP, smso=\EO1,
16353 dm3045|datamedia 3045a,
16354 OTbs, am, eo, km@, ul, xenl,
16355 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
16356 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
16357 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
16358 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
16360 # Datamedia DT80 soft switches:
16361 # 1 0=Jump 1=Smooth
16362 # Autorepeat 0=off 1=on
16363 # Screen 0=Dark 1=light
16364 # Cursor 0=u/l 1=block
16366 # 2 Margin Bell 0=off 1=on
16367 # Keyclick 0=off 1=on
16368 # ANSI/VT52 0=VT52 1=ANSI
16369 # Xon/Xoff 0=Off 1=On
16371 # 3 Shift3 0=Hash 1=UK Pound
16373 # Newline 0=Off 1=On
16374 # Interlace 0=Off 1=On
16376 # 4 Parity 0=Odd 1=Even
16377 # Parity 0=Off 1=On
16378 # Bits/Char 0=7 1=8
16379 # Power 0=60Hz 1=50Hz
16381 # 5 Line Interface 0=EIA 1=Loop
16382 # Aux Interface 0=EIA 1=Loop
16383 # Local Copy 0=Off 1=On
16386 # 6 Aux Parity 0=Odd 1=Even
16387 # Aux Parity 0=Off 1=On
16388 # Aux Bits/Char 0=7 1=8
16389 # CRT Saver 0=Off 1=On
16390 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
16391 dm80|dmdt80|dt80|datamedia dt80/1,
16392 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
16393 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16394 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
16395 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
16396 smul=\E[4m, use=vt100+4bsd,
16397 # except in 132 column mode, where it needs a little padding.
16398 # This is still less padding than the vt100, and you can always turn on
16399 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
16401 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
16403 clear=\E[H\E[2J$<50/>, cud1=\n,
16404 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
16405 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
16406 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
16407 dt80-sas|Datamedia DT803/DTX for SAS usage,
16410 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
16411 bel=^G, clear=^L, cr=\r,
16412 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
16413 cub1=^H, cud1=\EB, cuf1=^\,
16414 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
16415 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
16416 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
16417 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
16418 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
16419 smso=\E$2\004, tbc=\E'0,
16421 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
16422 # These aren't end-all Excel termcaps; but do insert/delete char/line
16423 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
16424 # The naming convention has been bent somewhat, with the use of E? (where
16425 # E is for 'Excel') as # a name. This was done to distinguish the entries
16426 # from the other Datamedias in use here, and yet to associate a model of
16427 # the Excel terminals with the regular datamedia terminals that share
16428 # major characteristics.
16429 excel62|excel64|datamedia Excel 62,
16430 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16431 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16433 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
16434 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16435 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16437 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
16438 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
16439 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
16440 smir=\E[4h, use=dt80,
16444 # Falco Data Products
16445 # 440 Potrero Avenue
16446 # Sunnyvale, CA 940864-196
16447 # Vox: (800)-325-2648
16448 # Fax: (408)-745-7860
16449 # Net: techsup@charm.sys.falco.com
16451 # Current Falco models as of 1995 are generally ANSI-compatible and support
16452 # emulations of DEC VT-series, Wyse, and Televideo types.
16455 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
16456 # This terminal was released around 1983 and was discontinued long ago.
16457 # The standout and underline highlights are the same.
16458 falco|ts1|ts-1|falco ts-1,
16460 cols#80, it#8, lines#24,
16461 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
16462 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16463 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
16464 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
16465 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
16466 smir=\Eq, smso=\Eg1, smul=\Eg1,
16467 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
16468 OTbs, am, da, db, mir, msgr, ul,
16469 cols#80, it#8, lines#24,
16470 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
16471 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
16472 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
16473 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
16474 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
16475 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
16476 smso=\Eg4, smul=\Eg1,
16477 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
16478 ts100|ts100-sp|falco ts100-sp,
16479 am, mir, msgr, xenl, xon,
16480 cols#80, it#8, lines#24, vt#3,
16481 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16482 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16483 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
16484 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16485 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16486 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16487 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
16488 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
16489 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
16490 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16491 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16492 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16493 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16494 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
16495 %;m%?%p9%t\016%e\017%;$<2>,
16496 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16497 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16499 ts100-ctxt|falco ts-100 saving context,
16500 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
16502 #### Florida Computer Graphics
16505 # Florida Computer Graphics Beacon System, using terminal emulator program
16506 # "host.com", as provided by FCG. This description is for an early release
16507 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
16510 # From: David Bryant <cbosg!djb> 1/7/83
16511 beacon|FCG Beacon System,
16514 bel=\ESTART\r\E37\r\EEND\r$<1>,
16515 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
16516 cub1=^H, cud1=\n, cuf1=\EV,
16517 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
16518 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
16519 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
16520 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
16521 rmul=\ESTART\r\E60\,0\r\EEND\r,
16522 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
16523 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
16524 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
16525 smul=\ESTART\r\E60\,1\r\EEND\r,
16530 # The f1720a differences from ANSI: no auto margin, destructive
16531 # tabs, # of lines, funny highlighting and underlining
16532 f1720|f1720a|fluke 1720A,
16534 cols#80, lines#16, xmc#1,
16535 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
16536 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
16537 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
16538 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16539 smso=\E[7m, smul=\E[4m,
16541 #### Liberty Electronics (Freedom)
16543 # Liberty Electronics
16544 # 48089 Fremont Blvd
16546 # Vox: (510)-623-6000
16547 # Fax: (510)-623-7021
16549 # From: <faletti@berkeley.edu>
16550 # (f100: added empty <acsc> to suppress a tic warning;
16551 # made this relative to adm+sgr -- note that <invis> isn't
16552 # known to work for f100 but does on the f110. --esr)
16553 f100|freedom|freedom100|freedom model 100,
16554 OTbs, am, bw, hs, mir, msgr, xon,
16556 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
16557 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16558 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
16559 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
16560 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
16561 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
16562 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
16563 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16564 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
16565 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
16566 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16567 f100-rv|freedom-rv|freedom 100 in reverse video,
16568 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
16569 # The f110 and f200 have problems with vi(1). They use the ^V
16570 # code for the down cursor key. When kcud1 is defined in terminfo
16571 # as ^V, the Control Character Quoting capability (^V in insert mode)
16572 # is lost! It cannot be remapped in vi because it is necessary to enter
16573 # a ^V to to quote the ^V that is being remapped!!!
16575 # f110/f200 users will have to decide whether
16576 # to lose the down cursor key or the quoting capability. We will opt
16577 # initially for leaving the quoting capability out, since use of VI
16578 # is not generally applicable to most interactive applications
16579 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
16580 f110|freedom110|Liberty Freedom 110,
16583 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
16584 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
16585 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
16586 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16587 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
16588 smso=\EG<, tsl=\Ef, use=f100,
16589 f110-14|Liberty Freedom 110 14inch,
16591 f110-w|Liberty Freedom 110 - 132 cols,
16592 cols#132, use=f110,
16593 f110-14w|Liberty Freedom 110 14in/132 cols,
16596 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16597 f200|freedom200|Liberty Freedom 200,
16598 OTbs, am, eslok, hs, mir, msgr, xon,
16599 cols#80, it#8, lines#24, wsl#80,
16600 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
16601 clear=^Z, cnorm=\E.1, cr=\r,
16602 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
16603 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16604 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
16605 flash=\Eo$<200/>\En, fsl=\r, home=^^,
16606 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
16607 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
16608 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16609 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16610 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16611 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
16612 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16613 f200-w|Liberty Freedom 200 - 132 cols,
16614 cols#132, use=f200,
16615 # The f200 has the ability to reprogram the down cursor key. The key is
16616 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
16617 # so powering the terminal off and on will not cause the change to be lost.
16618 f200vi|Liberty Freedom 200 for vi,
16619 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
16620 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
16621 cols#132, use=f200vi,
16625 # Graphon Corporation
16626 # 544 Division Street
16627 # Campbell, CA 95008
16628 # Vox: (408)-370-4080
16629 # Fax: (408)-370-5047
16630 # Net: troy@graphon.com (Troy Morrison)
16633 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
16634 # including one odd hybrid that starts out life on power-up as a character
16635 # terminal, than can be switched to X graphics mode (driven over the serial
16636 # line) by an escape sequence. No info on this beast yet.
16637 # (go140: I added <rmam>/<smam> based on the init string -- esr)
16638 go140|graphon go-140,
16640 cols#80, it#8, lines#24,
16641 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
16642 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16643 ed=\E[J$<10/>, el=\E[K, ht=^I,
16644 if=/usr/share/tabset/vt100, il1=\E[L,
16645 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16646 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
16647 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
16648 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
16649 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
16650 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16651 go140w|graphon go-140 in 132 column mode,
16654 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16656 # Hacked up vt200 termcap to handle GO-225/VT220
16657 # From: <edm@nwnexus.WA.COM>
16658 # (go225: I added <rmam>/<smam> based on the init string -- esr)
16659 go225|go-225|Graphon 225,
16660 OTbs, am, mir, xenl,
16661 cols#80, it#8, lines#25, vt#3,
16662 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16663 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
16664 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16665 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
16666 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
16667 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16668 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
16669 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
16670 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
16671 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
16672 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
16673 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16675 #### Harris (Beehive)
16677 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
16678 # Their terminal group is ancient history now (1995) though the parent
16679 # company is still in business.
16682 # Beehive documentation is undated and marked Preliminary and has no figures
16683 # so we must have early Superbee2 (Model 600, according to phone conversation
16684 # with mfr.). It has proved reliable except for some missing padding
16685 # (notably after \EK and <nl> at bottom of screen).
16687 # The key idea is that AEP mode is poison for <cup> & that US's in
16688 # the local memory should be avoided like the plague. That means
16689 # that the 2048 character local buffer is used as 25 lines of 80
16690 # characters, period. No scrolling local memory, folks. It also
16691 # appears that we cannot use naked INS LINE feature since it uses
16692 # US. The sbi fakes <il1> with an 80-space insert that may be too
16693 # slow at low speeds; also spaces get converted to \040 which is
16694 # too long for some programs (not vi). DEL LINE is ok but slow.
16696 # The <nl> string is designed for last line of screen ONLY; cup to
16697 # 25th line corrects the motion inherent in scrolling to Page 1.
16699 # There is one understood bug. It is that the screen appears to
16700 # pop to a new (blank) page after a <nel>, or leave a half-line
16701 # ellipsis to a quad that is the extra 48 memory locations. The
16702 # data received is dumped into memory but not displayed. Not to
16703 # worry if <cup> is being used; the lines not displayed will be,
16704 # whenever the cursor is moved up there. Since <cup> is addressed
16705 # relative to MEMORY of window, nothing is lost; but beware of
16706 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
16707 # therefore, is setenv MORE -c .
16709 # WARNING: Not all features tested.
16711 # Timings are assembled from 3 sources. Some timings may reflect
16712 # SB2/Model 300 that were used if more conservative.
16713 # Tested on a Model 600 at 1200 and 9600 bd.
16715 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
16716 # placed on the keyboard and useless because of AEP, is made
16717 # into a backspace key. In use ESC must be pressed twice (to send)
16718 # and sending ^C must be prefixed by ESC to avoid that weird
16719 # transmit mode associated with ENTER key.
16721 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
16722 # the screen, then it has dropped into ENTER mode; hit
16723 # RESET--ONLINE--!tset.
16725 # As delivered this machine has a FATAL feature that will throw
16726 # it into that strange transmit state (SPOW) if the space bar is
16727 # hit after a CR is received, but before receiving a LF (or a
16730 # The circuits MUST be modified to eliminate the SPOW latch.
16731 # This is done by strapping on chip A46 of the I/O board; cut
16732 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
16733 # chip. This mod has been checked out on a Mod 600 of Superbee II.
16734 # With this modification absurdly high timings on cr are
16737 # NOTE WELL that the rear panel switch should be set to CR/LF,
16740 sb1|beehive superbee,
16741 OTbs, am, bw, da, db, mir, ul, xsb,
16742 cols#80, lines#25, xmc#1,
16743 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
16744 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
16745 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
16746 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
16747 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16748 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16749 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16750 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
16751 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
16752 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
16753 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
16754 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
16755 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
16756 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
16757 smso=\E_1, smul=\E_0, tbc=\E3,
16758 sbi|superbee|beehive superbee at Indiana U.,
16760 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
16762 # Alternate (older) description of Superbee - f1=escape, f2=^C.
16763 # Note: there are at least 3 kinds of superbees in the world. The sb1
16764 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
16765 # The sb3 puts garbage on the bottom of the screen when you scroll with
16766 # the switch in the back set to CRLF instead of AEP. This description
16767 # is tested on the sb2 but should work on all with either switch setting.
16768 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
16769 # the other two if you want to try to hit that tiny escape key.
16770 # This description is tricky: being able to use cup depends on there being
16771 # 2048 bytes of memory and the hairy <nl> string.
16772 superbee-xsb|beehive super bee,
16774 cols#80, it#8, lines#25,
16775 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
16776 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
16777 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
16778 home=\EH, ht=^I, hts=\E1,
16779 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
16780 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
16781 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
16782 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
16783 # This loses on lines > 80 chars long, use at your own risk
16784 superbeeic|super bee with insert char,
16785 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
16786 sb2|sb3|fixed superbee,
16787 xsb@, use=superbee,
16789 #### Beehive Medical Electronics
16791 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
16792 # Regarding your question though; Beehive terminals weren't made by Harris.
16793 # They were made by Beehive Medical Electronics in Utah. They went out of
16794 # business in the early '80s.
16796 # (OK, then, I don't know why a couple of these say "harris beehive".)
16799 # Reports are that most of these Beehive entries (except superbee) have not
16800 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
16802 # (bee: <ich1> was empty, which is obviously bogus -- esr)
16803 beehive|bee|harris beehive,
16806 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
16807 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16808 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
16809 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16810 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
16811 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
16812 smir=\EQ, smso=\EdP, smul=\Ed`,
16813 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
16814 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
16815 # look at those spaces in <rmso>/<smso>. Seems strange to me...
16816 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
16817 # really care, cook up one using ^F -- esr)
16818 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
16820 cols#80, it#8, lines#20,
16821 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
16822 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
16823 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
16824 beehive4|bh4|beehive 4,
16827 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
16828 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
16829 # There was an early Australian kit-built computer called a "Microbee".
16830 # It's not clear whether this is for one of those or for a relative
16832 microb|microbee|micro bee series,
16834 cols#80, it#8, lines#24,
16835 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16836 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16837 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16838 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
16839 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
16840 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
16842 # 8675, 8686, and bee from Cyrus Rahman
16843 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
16844 ha8675|harris 8675,
16845 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
16846 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
16847 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
16849 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
16851 ha8686|harris 8686,
16852 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
16853 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
16854 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
16856 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
16857 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
16858 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
16859 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
16863 # Hazeltine appears to be out of the terminal business as of 1995. These
16864 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
16865 # Harris. They have a hazeltine.com domain (but no web page there ) and can
16869 # 450 East Pulaski Road
16870 # Greenlawn, New York 11740
16872 # As late as 1993, manuals for the terminal product line could still be
16875 # TRW Customer Service Division
16878 # Fairfield, NJ 07007-2078
16880 # They're now (1998) a subsidiary of General Electric, operating under the
16881 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
16882 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
16885 # Since <cuf1> is blank, when you want to erase something you
16886 # are out of luck. You will have to do ^L's a lot to
16887 # redraw the screen. h1000 is untested. It doesn't work in
16888 # vi - this terminal is too dumb for even vi. (The code is
16889 # there but it isn't debugged for this case.)
16890 hz1000|hazeltine 1000,
16893 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
16895 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16896 hz1420|hazeltine 1420,
16899 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
16900 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
16901 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
16903 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
16904 # freakout with out-of-range args and tn3270. No hz since it needs to
16906 hz1500|hazeltine 1500,
16909 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16910 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
16911 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
16912 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
16913 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
16914 # h1510 assumed to be in sane escape mode. Else use h1500.
16915 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
16916 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
16917 # removed incorrect and overridden ":do=^J:" -- esr)
16918 hz1510|hazeltine 1510,
16921 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
16922 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
16923 el=\E^O, il1=\E^Z, ind=\n,
16925 # The following switch settings are assumed for normal operation:
16926 # FULL CR U/L_CASE ESCAPE
16927 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
16928 # Other switches may be set for operator convenience or communication
16930 hz1520|Hazeltine 1520,
16931 OTbs, am, bw, msgr,
16933 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
16934 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16935 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
16936 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
16937 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
16938 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
16939 # This version works with the escape switch off
16940 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
16941 hz1520-noesc|hazeltine 1520,
16944 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16945 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
16946 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
16947 # Note: the h1552 appears to be the first Hazeltine terminal which
16948 # is not braindamaged. It has tildes and backprimes and everything!
16949 # Be sure the auto lf/cr switch is set to cr.
16950 hz1552|hazeltine 1552,
16952 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
16953 lf2=red, lf3=green, use=vt52,
16954 hz1552-rv|hazeltine 1552 reverse video,
16955 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
16956 # Note: h2000 won't work well because of a clash between upper case and ~'s.
16957 hz2000|hazeltine 2000,
16960 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
16961 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
16962 il1=~\032$<6>, ind=\n, pad=^?,
16963 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
16964 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
16965 # to work ok. There is one problem though if one types a lot of garbage
16966 # characters very fast vi seems not able to keep up and hangs while trying
16967 # to insert. That's in insert mode while trying to insert in the middle of
16968 # a line. It might be because the Esprit doesn't have insert char and delete
16969 # char as a built in function. Vi has to delete to end of line and then
16970 # redraw the rest of the line.
16971 esprit|Hazeltine Esprit I,
16974 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
16975 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16976 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
16977 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
16978 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
16979 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
16980 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
16981 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
16982 esprit-am|hazeltine esprit auto-margin,
16984 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
16985 # Vi it seems always wants to send a control J for "do" and it turned out
16986 # that the terminal would work somewhat if the auto LF/CR was turned off.
16987 # (hmod1: removed :dn=~^K: -- esr)
16988 hmod1|Hazeltine Modular 1,
16991 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16992 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
16993 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
16994 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
16996 # Hazeltine Executive 80 Model 30 (1554?)
16997 # from Will Martin <control@ALMSA-1.ARPA> via BRL
16998 # Like VT100, except for different "am" behavior.
16999 hazel|exec80|h80|he80|Hazeltine Executive 80,
17001 cols#80, it#8, lines#24, vt#3,
17002 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
17003 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
17004 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
17005 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
17006 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
17007 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
17008 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
17009 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
17010 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
17011 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
17012 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17013 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
17019 ibm327x|line mode IBM 3270 style,
17021 clear=\r\n, el=\r, home=\r,
17023 ibm3101|i3101|IBM 3101-10,
17026 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17027 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17028 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
17029 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
17030 ibm3151|IBM 3151 display,
17031 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
17032 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17033 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17034 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
17035 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
17036 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
17037 # removed kend, knp, kpp -TD
17039 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17040 # Added ich1 (kich1 without ich1 doesn't make sense).
17041 # Added il1 (kil1 without il1 doesn't make sense).
17042 # Added xon (terminal uses XON/XOFF flow control).
17044 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
17045 OTbs, am, mir, msgr, xon,
17046 cols#80, it#8, lines#24,
17047 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
17049 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
17050 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17051 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
17052 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
17053 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
17054 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
17055 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
17056 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
17057 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
17058 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
17059 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
17060 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
17061 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
17062 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
17063 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
17064 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
17065 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
17066 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
17068 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
17069 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
17071 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
17072 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
17075 ibm3162|IBM 3162 display,
17076 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
17077 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
17080 # This really should not use setab/setaf, but it is clear that the
17081 # original terminfo does not toggle red/blue colors as in setb/setf.
17082 ibm3164|i3164|IBM 3164,
17084 colors#8, pairs#64,
17085 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
17086 setab=\E4 %p1%{64}%+%c,
17087 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
17088 smcup=\E!9/N\E>B, use=ibm3161,
17090 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
17092 cols#80, it#8, lines#25,
17093 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17095 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
17096 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17097 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17098 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17099 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
17100 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17101 invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q,
17102 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
17103 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
17104 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
17105 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
17106 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
17107 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
17108 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
17109 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
17110 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
17111 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
17112 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H,
17113 kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q,
17114 kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T,
17115 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec,
17116 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17118 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17121 ibmaed|IBM Experimental display,
17122 OTbs, am, eo, msgr,
17123 cols#80, it#8, lines#52,
17124 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
17125 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17126 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
17127 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17128 rmso=\E0, sgr0=\E0, smso=\E0,
17129 ibm-apl|apl|IBM apl terminal simulator,
17130 lines#25, use=dm1520,
17131 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
17132 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
17133 ibmmono|IBM workstation monochrome,
17135 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
17136 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
17137 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
17138 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
17139 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
17140 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
17142 ibmega|IBM Enhanced Color Display,
17143 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17144 nel=\r\n, use=ibmmono,
17145 # This color scheme is assumed in some recent IBM terminal descriptions
17146 # (green on black, emulated on a 16-color terminal).
17147 ibm+color|IBM color definitions,
17148 colors#8, ncv#3, pairs#64,
17150 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
17151 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
17152 %=%t46m%e%p1%{7}%=%t107m%;,
17153 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
17154 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
17155 %=%t36m%e%p1%{7}%=%t97m%;,
17156 ibm+16color|IBM aixterm color definitions,
17157 colors#16, pairs#0x100,
17158 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
17159 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
17160 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
17161 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
17162 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
17163 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
17164 ibm5154|IBM 5154 Color display,
17165 colors#8, ncv@, pairs#64,
17166 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
17168 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
17169 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
17171 ibmvga-c|IBM VGA display color termcap,
17172 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17173 nel=\r\n, use=ibmega-c,
17174 ibmvga|IBM VGA display,
17175 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
17176 nel=\r\n, use=ibmega,
17177 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
17178 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
17180 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
17181 ibm6155|IBM 6155 Black & White display,
17182 blink@, bold@, use=ibm5151,
17183 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
17184 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
17186 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
17187 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
17189 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
17191 ibm6154|IBM 6154 Color displays,
17192 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
17193 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17195 sgr0=\E[0;10m, use=ibm5154,
17196 ibm6153|IBM 6153 Black & White display,
17197 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
17198 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17200 sgr0=\E[0;10m, use=ibm5151,
17201 ibm6153-90|IBM 6153 Black & White display,
17203 blink@, bold@, use=ibm5151,
17204 ibm6153-40|IBM 6153 Black & White display,
17205 cols#40, lines#12, use=ibm6153-90,
17206 ibm8512|ibm8513|IBM color VGA Terminal,
17208 cols#80, it#8, lines#25,
17209 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
17210 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
17211 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
17212 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
17213 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
17214 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
17215 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
17216 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
17217 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
17218 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
17219 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
17220 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
17221 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17223 hft-c|HFT with Color,
17224 colors#8, pairs#64,
17225 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
17226 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
17227 use=ibm5151, use=ibm+color,
17228 hft-c-old|HFT with Color PC850,
17229 colors#8, pairs#64,
17230 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
17232 hft-old|AIWS High Function Terminal,
17235 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
17236 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17237 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17238 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
17239 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17240 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
17241 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
17242 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
17243 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
17244 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
17245 ibm-system1|system1|ibm system/1 computer,
17248 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
17249 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
17251 # lft-pc850 : IBM Low Function Terminal Device
17252 # lft "supports" underline, bold, and blink in the sense that the lft code
17253 # sets all the right bits. HOWEVER, depending upon the adapter, these
17254 # attributes may or may not be supported by the device driver.
17255 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
17257 cols#80, it#8, lines#25,
17258 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
17260 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
17261 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17262 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17263 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17264 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
17265 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
17266 il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
17267 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17268 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
17269 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
17270 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
17271 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
17272 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
17273 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
17274 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
17275 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
17276 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
17277 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
17278 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
17279 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
17280 krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l,
17281 rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
17282 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
17283 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
17284 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17285 tbc=\E[3g, use=ecma+index,
17286 # "Megapel" refers to the display adapter, which was used with the IBM RT
17288 ibm5081|hft|IBM Megapel Color display,
17289 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
17290 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
17291 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
17294 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
17296 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
17298 ibm8514|IBM 8514/a color VGA display,
17300 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
17301 ibm8514-c|IBM 8514 color display with standout and underline,
17304 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
17305 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
17309 # AIX entries. IBM ships these with AIX 3.2.5.
17310 # -- added rc, sc based on manpage -TD
17311 # -- added rmacs, smacs based on manpage -TD
17312 # Note that we could use ibm+16color, but that is not how IBM defines this one.
17313 aixterm|IBM Aixterm Terminal Emulator,
17315 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
17316 fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
17318 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17319 %t;8%;m%?%p9%t\E(0%e\E(B%;,
17320 sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
17322 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
17324 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
17325 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
17326 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17327 %t;8%;m%?%p9%t\E(0%e\E(B%;,
17328 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
17329 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
17331 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
17332 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
17334 tsl=\E[?%p1%dT, use=ibm6153,
17335 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
17337 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17339 sgr0=\E[m, smacs@, use=aixterm,
17340 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
17342 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17344 sgr0=\E[m, smacs@, use=aixterm-m,
17346 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
17347 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
17348 use=ibm+16color, use=aixterm,
17350 #### Infoton/General Terminal Corp.
17353 # gt100 sounds like something DEC would come out with. Let's hope they don't.
17354 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
17357 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17358 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
17359 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
17360 ind=\n, rmso=\Ea, smso=\Eb,
17364 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17365 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
17366 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
17367 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
17368 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
17372 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
17373 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
17374 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
17378 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
17379 ed=^K, ind=\n, ll=^H^\,
17381 # The ICL6402 was actually the Kokusai Display System 6402.
17382 # The 6404 was the KDS7372 (color version of the 6402).
17384 # ICL6404 control codes follow:
17387 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17388 #ctrl-A set SOM position at cursor position
17391 #ctrl-I Horizontal tab
17394 #ctrl-L Cursor right
17395 #ctrl-M Carriage return
17396 #ctrl-N Disable xon/xoff to host
17397 #ctrl-O Enable xon/xoff to host
17398 #ctrl-R Enable bidirectional mode
17399 #ctrl-T Disable bidirectional mode
17400 #ctrl-V Cursor down
17401 #ctrl-Z Clear unprotected data to insert char
17402 #ctrl-^ Cursor home
17405 #ESC lead-in char for multiple character command
17407 #ESC space R execute power on sequence
17408 #ESC ! p1 p2 define scroll region:
17409 # p1 = scroll top line: 20h - 37h
17410 # p1 = scroll bottom line: 20h - 37h
17411 #ESC " unlock keyboard
17412 #ESC # lock keyboard
17413 #ESC $ Semi-graphics mode on
17414 #ESC % Semi-graphics mode off
17415 #ESC & protect mode on
17416 #ESC ' protect mode off
17417 #ESC ( write protect mode off (full intensity)
17418 #ESC ) write protect mode on (half intensity)
17420 #ESC * clear screen
17421 #ESC + clear unprotected data to insert char
17422 #ESC , clear unprotected data to half intensity spaces
17423 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
17424 # p1 = page number 0 - 3
17425 # p2 = row 20h - 7fh
17426 # p3 = column (lo) 20h - 7fh
17427 # p4 = column (hi) 20h - 21h (only 132 col)
17428 #ESC . p1 set cursor style:
17429 # p1 = 0 invisible cursor
17430 # p1 = 1 block blinking cursor
17431 # p1 = 2 block steady cursor
17432 # p1 = 3 underline blinking cursor
17433 # p1 = 4 underline steady cursor
17434 #ESC / transmit cursor location (page, row, column)
17435 #ESC 0 p1 p2 p3 p4 program edit key:
17436 # p1 = edit key code: '@'-'S', '`'-'s'
17437 # p2 p3 p4 = program data (3 bytes)
17440 #ESC 2 clear tab at cursor
17441 #ESC 3 clear all tabs
17442 #ESC 4 send unprotect line to cursor
17443 #ESC 5 send unprotect page to cursor
17444 #ESC 6 send line to cursor
17445 #ESC 7 send page to cursor
17446 #ESC 8 n set scroll mode:
17447 # n = 0 set jump scroll
17448 # n = 1 set smooth scroll
17449 #ESC 9 n control display:
17450 # n = 0 display off
17452 #ESC : clear unprotected data to null
17453 #ESC ; clear unprotected data to insert char
17456 #ESC = p1 p2 address cursor to row, column
17457 # p1 = row 20h - 7fh
17458 # p2 = column (lo) 20h - 7fh
17459 # p3 = column (hi) 20h - 21h (only 132 col)
17460 #ESC > keyclick off
17461 #ESC ? transmit cursor location (row, column)
17463 #ESC @ copy print mode on
17464 #ESC A copy print mode off
17465 #ESC B block mode on
17466 #ESC C block mode off (conversation mode)
17467 #ESC D F set full duplex
17468 #ESC D H set half duplex
17470 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
17471 # 0 = black, 1 = red, 2 = green, 3 = yellow
17472 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
17473 #ESC G n set serial field attribute (n = 30h - 3Fh)
17474 #ESC H n full graphics mode:
17475 # n = 0 exit full graphics mode
17476 # n = 1 enter full graphics mode
17479 #ESC K forward page
17481 #ESC L unformatted page print
17482 #ESC M L move window left (132 col mode only)
17483 #ESC M R move window right (132 col mode only)
17484 #ESC N set page edit (clear line edit)
17485 #ESC O set line edit (clear page edit)
17486 #ESC P formatted page print
17487 #ESC Q character insert
17489 #ESC S send message unprotected only
17490 #ESC T erase line to insert char
17491 #ESC U set monitor mode (see ESC X, ESC u)
17493 #ESC V n select video attribute mode:
17494 # n = 0 serial field attribute mode
17495 # n = 1 parallel character attribute mode
17496 #ESC V 2 n define line attribute:
17497 # n = 0 single width single height
17498 # n = 1 single width double height
17499 # n = 2 double width single height
17500 # n = 3 double width double height
17501 #ESC V 3 n select character font:
17502 # n = 0 system font
17503 # n = 1 user defined font
17504 #ESC V 4 n select screen mode:
17505 # n = 0 page screen mode
17506 # n = 1 virtual screen mode
17507 #ESC V 5 n control mouse mode:
17508 # n = 0 disable mouse
17509 # n = 1 enable sample mode
17510 # n = 2 send mouse information
17511 # n = 3 enable request mode
17512 #ESC W character delete
17513 #ESC X clear monitor mode (see ESC U, ESC u)
17514 #ESC Y erase page to insert char
17516 #ESC Z n send user/status line:
17517 # n = 0 send user line
17518 # n = 1 send status line
17519 # n = 2 send terminal ID
17520 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
17524 # 3 = blink blank (= blank)
17526 # 5 = reverse blank
17527 # 6 = reverse blink
17528 # 7 = reverse blink blank (= reverse blank)
17530 # 9 = underline blank
17531 # : = underline blink
17532 # ; = underline blink blank
17533 # < = reverse underline
17534 # = = reverse underline blank
17535 # > = reverse underline blink
17536 # ? = reverse underline blink blank
17537 # p2, p3: f/grnd, b/grnd colour
17538 # (see ESC F for colours)
17539 # use ZZ for mono, eg.
17540 # ESC [ 0 Z Z for normal
17541 # ESC [ 4 Z Z for inverse etc.
17543 #ESC \ n set page size:
17544 # n = 1 24 lines/page
17545 # n = 2 48 lines/page
17546 # n = 3 72 lines/page
17547 # n = 4 96 lines/page
17548 #ESC ] n set Wordstar mode:
17549 # n = 0 normal (KDS7372) mode
17550 # n = 1 Wordstar mode
17552 #ESC b set foreground colour screen
17554 #ESC c n enter self-test mode:
17555 # n = 0 exit self test mode
17559 # n = 4 screen display test
17560 # n = 5 main/printer port test
17561 # n = 6 mouse port test
17562 # n = 7 graphics board test
17563 # n = 8 graphics memory test
17564 # n = 9 display all 'E'
17565 # n = : display all 'H'
17566 #ESC d set background colour screen
17568 #ESC e n program insert char (n = insert char)
17569 #ESC f text CR load user status line with 'text'
17571 #ESC g display user status line on 25th line
17572 #ESC h display system status line on 25th line
17574 #ESC j reverse linefeed
17575 #ESC k n duplex/local edit mode:
17576 # n = 0 duplex edit mode
17577 # n = 1 local edit mode
17578 #ESC l n select virtual screen:
17581 #ESC m save current config to NVRAM
17582 #ESC n p1 select display screen:
17587 #ESC o p1 p2 set characters/line and attribute:
17588 # p1 = 0 80 chars/line
17590 #ESC o p1 p2 set characters/line and attribute:
17591 # p1 = 0 80 chars/line
17592 # p1 = 1 132 chars/line
17593 # p2 = 0 single width single height
17594 # p2 = 1 single width double height
17595 # p2 = 2 double width single height
17596 # p2 = 3 double width double height
17598 #ESC q insert mode on
17599 #ESC r edit mode on
17600 #ESC s send message all
17601 #ESC t erase line to null
17602 #ESC u clear monitor mode (see ESC U, ESC X)
17603 #ESC v autopage mode on
17604 #ESC w autopage mode off
17605 #ESC x p1 p2 p3 define delimiter code...
17606 #ESC y erase page to null
17608 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
17609 # p1 = starting row
17610 # p2 = starting column
17614 #ESC { p1 p2 p3 p4 configure main port
17615 # (baud, stop bits, parity, word length)
17617 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
17618 # p1 = function key code:
17619 # '1' - ';' normal f1- f11
17620 # '<' - 'F' shifted f1 - f11
17621 # p2 = program mode:
17625 # Ctrl-Y = terminator
17626 # (use Ctrl-P to escape ^P, ^Y )
17628 #ESC } p1 p2 p3 p4 configure printer port
17629 # (baud, stop bits, parity, word length)
17630 #ESC ~ send system status
17632 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
17634 # Entry is by esr going solely on above information and is UNTESTED.
17635 # This actually looks a lot like a Televideo 9xx.
17636 # This entry uses page 0 and is monochrome; I'm not brave enough to try
17637 # to make color work without a test terminal. The <am> capability is a guess.
17638 # The initialization string sets conversation mode, blinking underline cursor,
17639 # full duplex, parallel attribute mode, display user status line, white
17640 # foreground, black background, normal highlight.
17642 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
17645 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
17646 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
17648 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
17649 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
17650 hts=\E1, il1=\EE, invis=\E[1ZZ,
17651 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
17652 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
17653 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
17654 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
17655 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
17656 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
17657 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
17658 rs2=\Eo1, use=icl6404,
17660 #### Interactive Systems Corp
17662 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
17663 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
17664 # bought out by Sun.
17667 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
17668 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
17669 # ":le=^_:" later overridden -- esr)
17670 intext|Interactive Systems Corporation modified owl 1200,
17672 cols#80, it#8, lines#24, xmc#1,
17673 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
17674 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
17675 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
17676 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
17677 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
17678 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
17679 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
17680 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
17682 intext2|intextii|INTERACTIVE modified owl 1251,
17684 cols#80, lines#24, xmc#0,
17685 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
17686 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17687 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
17688 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
17689 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
17690 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
17691 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
17692 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
17693 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
17694 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
17695 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
17698 #### Kimtron (abm, kt)
17700 # Kimtron seems to be history, but as March 1998 these people are still
17701 # offering repair services for Kimtron equipment:
17703 # Com/Pair Monitor Service
17704 # 1105 N. Cliff Ave.
17705 # Sioux Falls, South Dakota 57103
17707 # WATS voice: 1-800/398-4946
17708 # POTS fax: +1 605/338-8709
17709 # POTS voice: +1 605/338-9650
17710 # Email: <compair@sd.cybernex.net>
17711 # Internet/Web: <http://www.com-pair.com>
17713 # Kimtron entries include (undocumented) codes for: enter dim mode,
17714 # enter bold mode, enter reverse mode, turn off all attributes.
17717 # Kimtron ABM 85 added by Dual Systems
17718 # (abm85: removed duplicated ":kd=^J:" -- esr)
17719 abm85|Kimtron ABM 85,
17720 OTbs, am, bw, msgr,
17721 cols#80, it#8, lines#24, xmc#1,
17722 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
17723 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17724 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
17725 if=/usr/share/tabset/stdcrt, il1=\EE,
17726 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
17727 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
17728 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
17729 # Kimtron ABM 85H added by Dual Systems.
17730 # Some notes about the abm85h entries:
17731 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
17732 # firmware revs prior to SP51
17733 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
17734 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
17735 # in some places and NOT software settable i.e., <is2> can't fix it)
17736 # 3) In 85h mode, the arrow keys and special functions transmit when
17737 # the terminal is in dup-edit, and work only locally in local-edit.
17738 # Vi won't swallow `del char' for instance, but <smcup> turns on
17739 # dup-edit anyway so that the arrow keys will work right. If the
17740 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
17741 # <is2>. Note that 920E mode does not have software commands to toggle
17742 # between dup and local edit, so you get whatever was set last on the
17744 # 4) <flash> attribute is nice, but seems too slow to work correctly
17746 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
17747 # are selected, the <xmc@> entry should be removed.
17748 # 6) auto new-line should be on (selectable from setup mode only)
17750 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
17751 abm85h|Kimtron ABM 85H native mode,
17754 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
17756 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
17758 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
17760 abm85e|Kimtron ABM 85H in 920E mode,
17762 bel=^G, dim=\E), flash@,
17763 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
17765 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17766 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
17769 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
17771 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17772 # From: <malman@bbn-vax.arpa>
17773 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
17774 kt7|kimtron model kt-7,
17776 cols#80, it#8, lines#24,
17777 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
17778 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17779 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
17780 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
17781 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
17782 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
17783 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17784 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17785 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
17786 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
17787 # other kt7 entry and the adjacent key capabilities). Removed EE which is
17788 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
17789 # but we can't figure out what.
17790 kt7ix|kimtron model kt-7 or 70 in IX mode,
17792 cols#80, it#8, lines#25,
17793 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
17794 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
17795 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17796 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
17797 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
17798 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
17799 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
17800 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17801 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17802 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
17803 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
17804 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
17806 #### Microdata/MDIS
17808 # This was a line of terminals made by McDonnell-Douglas Information Systems.
17809 # These entries come direct from MDIS documentation. I have edited them only
17810 # to move primary names of the form p[0-9] * to aliases, and to comment out
17811 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
17812 # also removed the change history; the last version indicates this is
17813 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
17816 # McDonnell Information Systems Terminal Family History
17817 # =========================================
17819 # Prism-1, Prism-2 and P99:
17820 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
17822 # Prism-4 and Prism-5:
17823 # Slightly less ancient range of Microdata terminals. Follow-on from
17824 # Prism-2, but with many enhancements. P5 has eight display pages.
17827 # A special terminal for use with library systems, primarily in Germany.
17828 # Limited numbers. Similar functionality to P5 (except attributes?).
17830 # Prism-7, Prism-8 and Prism-9:
17831 # More recent range of MDIS terminals, in which P7 and P8
17832 # replace the P4 & P5, with added functionality, and P9 is the flagship.
17833 # The P9 has two emulation modes - P8 and ANSI - and includes a
17834 # large number of the DEC VT220 control sequences. Both
17835 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
17837 # Prism-12 and Prism-14:
17838 # Latest range, functionally very similar to the P9. The P14 has a
17839 # black-on-white overscanning screen.
17841 # The terminfo definitions given here are:
17843 # p2 - Prism-2 (or Prism-1 or P99).
17845 # p4 - Prism-4 (and older P7s & P8s).
17846 # p5 - Prism-5 (or Prism-6).
17849 # p8 - Prism-8 (in national or multinational mode).
17850 # p8-w - 132 column version of p8.
17851 # p9 - Prism-9 in ANSI mode.
17852 # p9-w - 132 column version of p9.
17853 # p9-8 - Prism-9 in Prism-8 emulation mode.
17854 # p9-8-w - As p9-8, but with 132 columns.
17856 # p12 - Prism-12 in ANSI mode.
17857 # p12-w - 132 column version of p12.
17858 # p12-m - Prism-12 in MDC emulation mode.
17859 # p12-m-w - As p12-m, but with 132 columns.
17860 # p14 - Prism-14 in ANSI mode.
17861 # p14-w - 132 column version of p14.
17862 # p14-m - Prism-14 in MDC emulation mode.
17863 # p14-m-w - As p14-m, but with 132 columns.
17868 # Includes Prism-1 and basic P99 without SP or MP loaded.
17869 # The simplest form of Prism-type terminal.
17870 # Basic cursor movement and clearing operations only.
17871 # No video attributes.
17873 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17874 # value up, followed by backspace.
17876 prism2|MDC Prism-2,
17879 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17880 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17881 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17882 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
17883 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17884 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17885 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
17890 # Includes early versions of P7 & P8.
17891 # Basic family definition for most Prisms (except P2 and P9 ANSI).
17893 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17894 # value up, followed by backspace.
17895 # Cursor key definitions removed because they interfere with vi and csh keys.
17897 prism4|p4|P4|MDC Prism-4,
17898 am, bw, hs, mc5i, msgr,
17899 cols#80, lines#24, wsl#72, xmc#1,
17900 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
17901 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17902 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17903 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17904 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
17905 fsl=\035\345, home=^A,
17906 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17907 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17908 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
17909 rev=^CD, rmso=^C\s, rmul=^C\s,
17910 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
17911 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
17912 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
17913 vpa=\013%p1%{32}%+%c,
17918 # Same definition as p4. Includes Prism-6 (not tested!).
17919 # Does not use any multi-page features.
17921 prism5|p5|P5|MDC Prism-5,
17927 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
17929 # Use p4 for very early models of P7.
17930 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17932 prism7|p7|P7|MDC Prism-7,
17933 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
17938 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
17939 # Supports national and multinational character sets.
17941 # Alternate char set operations only work in multinational mode.
17942 # Use p4 for very early models of P8.
17943 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17944 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17946 prism8|p8|P8|MDC Prism-8,
17947 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
17948 vpa=\E[%i%p1%dd, use=p4,
17950 # p8-w: Prism-8 in 132 column mode
17951 # --------------------------------
17953 # 'Wide' version of p8.
17955 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17957 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
17959 is2=\E[<12h\E[<14h, use=p8,
17961 # p9: Prism-9 in ANSI mode
17962 # -------------------------
17964 # The "flagship" model of this generation of terminals.
17965 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
17967 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
17968 # Fixes to deal with terminal firmware bugs:
17969 # . 'ri' uses insert-line since rev index doesn't always
17970 # . 'sgr0' has extra '0' since esc[m fails
17971 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
17972 # Not covered in the current definition:
17974 # . Programming Fn keys
17975 # . Graphic characters (defaults correctly to vt100)
17976 # . Padding values (sets xon)
17977 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17979 prism9|p9|P9|MDC Prism-9 in ANSII mode,
17980 am, bw, hs, msgr, xenl, xon,
17981 cols#80, it#8, lines#24, vt#3, wsl#72,
17982 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
17983 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
17984 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17985 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17986 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17987 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
17988 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
17989 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
17990 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
17991 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
17992 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17993 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17994 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
17995 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
17996 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
17997 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
17998 rmso=\E[27m, rmul=\E[24m,
17999 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
18002 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
18003 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
18004 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
18005 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
18008 # p9-w: Prism-9 in 132 column mode
18009 # --------------------------------
18011 # 'Wide' version of p9.
18013 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
18015 is2=\E[&p\E[<12l\E F\E[<14h,
18016 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
18018 # p9-8: Prism-9 in P8 mode
18019 # ------------------------
18021 # P9 terminal in P8 emulation mode.
18022 # Similar to p8 definition.
18023 # Insertion and deletion operations possible.
18025 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
18026 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18027 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
18029 # p9-8-w: Prism-9 in P8 and 132 column modes
18030 # ------------------------------------------
18032 # P9 terminal in P8 emulation mode and 132 column mode.
18034 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
18035 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18036 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
18038 # p12: Prism-12 in ANSI mode
18039 # ---------------------------
18041 # See p9 definition.
18043 prism12|p12|P12|MDC Prism-12 in ANSI mode,
18046 # p12-w: Prism-12 in 132 column mode
18047 # ----------------------------------
18049 # 'Wide' version of p12.
18051 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
18054 # p12-m: Prism-12 in MDC emulation mode
18055 # -------------------------------------
18057 # P12 terminal in MDC emulation mode.
18058 # Similar to p8 definition.
18059 # Insertion and deletion operations possible.
18061 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
18064 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
18065 # -------------------------------------------------------
18067 # P12 terminal in MDC emulation mode and 132 column mode.
18069 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
18072 # p14: Prism-14 in ANSII mode
18073 # ---------------------------
18075 # See p9 definition.
18077 prism14|p14|P14|MDC Prism-14 in ANSII mode,
18080 # p14-w: Prism-14 in 132 column mode
18081 # ----------------------------------
18083 # 'Wide' version of p14.
18085 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
18088 # p14-m: Prism-14 in MDC emulation mode
18089 # -------------------------------------
18091 # P14 terminal in MDC emulation mode.
18092 # Similar to p8 definition.
18093 # Insertion and deletion operations possible.
18095 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
18098 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
18099 # -------------------------------------------------------
18101 # P14 terminal in MDC emulation mode and 132 column mode.
18103 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
18106 # End of McDonnell Information Systems Prism definitions
18108 # These things were popular in the Pick database community at one time
18109 # From: George Land <georgeland@aol.com> 24 Sep 1996
18110 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
18112 cols#80, lines#24, ma#1, wsl#78, xmc#1,
18113 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
18114 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
18115 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
18116 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
18117 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
18118 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
18119 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18120 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
18121 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
18122 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
18125 #### Microterm (act, mime)
18127 # The mime1 entries refer to the Microterm Mime I or Mime II.
18128 # The default mime is assumed to be in enhanced act iv mode.
18131 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
18132 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
18133 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
18134 # since Sytek insists ^S means xoff.
18135 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
18136 act4|microterm|microterm act iv,
18139 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
18140 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
18141 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
18142 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
18143 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
18145 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
18146 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
18147 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
18148 act5|microterm5|microterm act v,
18149 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
18151 # Mimes using brightness for standout. Half bright is really dim unless
18152 # you turn up the brightness so far that lines show up on the screen.
18153 mime-fb|full bright mime1,
18154 is2=^S\E, rmso=^S, smso=^Y, use=mime,
18155 mime-hb|half bright mime1,
18156 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
18157 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
18158 # the more plausible ":do=^J:" -- esr)
18159 # uc was at one time disabled to get around a curses bug, be wary of it
18160 mime|mime1|mime2|mimei|mimeii|microterm mime1,
18162 cols#80, it#8, lines#24, vt#9,
18163 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
18164 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
18165 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
18166 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
18167 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
18168 # These termcaps (for mime2a) put the terminal in low intensity mode
18169 # since high intensity mode is so obnoxious.
18170 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
18173 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18174 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
18175 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
18176 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
18177 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
18178 smir=\EE, smso=\E\:, smul=\E6,
18179 # This is the preferred mode (but ^X can't be used as a kill character)
18180 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
18182 cols#80, it#8, lines#24,
18183 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18184 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
18185 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
18186 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
18187 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
18188 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
18189 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
18190 mime3a|mime1 emulating 3a,
18192 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
18193 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
18195 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
18197 # Wed Mar 9 18:53:21 1983
18198 # We run our terminals at 2400 baud, so there might be some timing problems at
18199 # higher speeds. The major improvements in this model are the terminal now
18200 # scrolls down and insert mode works without redrawing the rest of the line
18201 # to the right of the cursor. This is done with a bit of a kludge using the
18202 # exit graphics mode to get out of insert, but it does not appear to hurt
18203 # anything when using vi at least. If you have some users using act4s with
18204 # programs that use curses and graphics mode this could be a problem.
18205 mime314|mm314|mime 314,
18208 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
18209 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
18210 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
18211 # Microterm mime 340 from University of Wisconsin
18212 mm340|mime340|mime 340,
18214 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18215 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18216 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
18217 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
18218 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
18219 # This came from University of Wisconsin marked "astro termcap for jooss".
18220 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
18221 # also added <rmam>/<smam> based on the init string -- esr)
18222 mt4520-rv|micro-term 4520 reverse video,
18223 am, hs, msgr, xenl, xon,
18224 cols#80, it#8, lines#24, wsl#80,
18225 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
18226 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18227 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18228 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18229 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18230 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
18231 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
18232 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18233 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
18235 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18236 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
18237 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
18238 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
18239 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
18240 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
18241 tbc=\E[g, tsl=\E[25;1H,
18243 # Fri Aug 5 08:11:57 1983
18244 # This entry works for the ergo 4000 with the following setups:
18245 # ansi,wraparound,newline disabled, xon/xoff disabled in both
18248 # WARNING!!! There are multiple versions of ERGO 4000 microcode
18249 # Be advised that very early versions DO NOT WORK RIGHT !!
18250 # Microterm does have a ROM exchange program- use it or lose big
18251 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
18252 ergo4000|microterm ergo 4000,
18255 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
18256 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18257 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
18258 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
18259 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
18260 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18261 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
18262 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
18263 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
18264 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
18269 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
18270 # For what happened to that group, see the ADDS section.
18272 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
18275 # The following vendor-supplied termcaps were captured from the Boundless
18276 # Technologies site, 8 March 1998. I removed all-upper-case names that were
18277 # identical, except for case, to lower-case ones. I also uncommented the acsc
18280 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18281 # DEC vt200/300 with color capabilities added.
18282 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
18283 colors#8, pairs#64,
18284 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18286 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18287 # DEC vt200/300 with color capabilities added.
18288 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
18289 colors#8, pairs#64,
18290 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18291 use=ncr260vt300wan,
18292 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18293 # DEC vt200/300 with color capabilities added.
18294 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
18295 colors#8, pairs#64,
18296 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18298 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
18299 # DEC vt200/300 with color capabilities added.
18300 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
18301 colors#8, pairs#64,
18302 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
18303 use=ncr260vt300wpp,
18304 # This definition for ViewPoint supports several attributes. This means
18305 # that it has magic cookies (extra spaces where the attributes begin).
18306 # Some applications do not function well with magic cookies. The System
18307 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18308 # If supporting various attributes is not vital, 'xmc#1' and the extra
18309 # attributes can be removed.
18310 # Mapping to ASCII character set ('acsc' capability) can also be
18311 # restored if needed.
18312 ncr260vppp|NCR 2900_260 viewpoint,
18313 am, bw, hs, km, mc5i, mir, msgr, xon,
18314 cols#80, lines#24, nlab#32, xmc#1,
18315 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18316 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
18317 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
18318 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
18319 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
18320 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
18321 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
18322 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18324 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
18325 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
18326 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
18327 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
18328 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
18329 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
18330 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
18331 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
18332 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
18333 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
18334 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
18335 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
18336 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
18337 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18338 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18340 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
18341 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
18342 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
18344 cup=\Ea%i%p1%dR%p2%dC$<30>,
18345 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18347 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18350 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
18351 am, hs, mir, msgr, xenl, xon,
18352 cols#80, lines#24, nlab#32,
18353 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18354 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18355 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18356 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
18357 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18358 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18359 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18360 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18361 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18362 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
18363 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
18364 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
18365 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
18367 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18369 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18370 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
18371 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
18372 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
18373 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
18374 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18377 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18378 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18379 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
18380 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
18381 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
18382 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
18384 cup=\E[%i%p1%d;%p2%dH$<30>,
18385 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18387 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18390 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
18391 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18393 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18394 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18395 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
18396 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
18397 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18399 smkx=\E=, use=ncr260vt100an,
18400 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
18402 cup=\E[%i%p1%d;%p2%dH$<30>,
18403 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18405 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18408 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
18409 am, hs, mir, msgr, xenl, xon,
18410 cols#80, lines#24, nlab#32,
18411 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18412 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18413 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18414 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
18415 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18416 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18417 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18418 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18419 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18420 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
18421 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
18422 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
18423 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
18424 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18426 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18427 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
18428 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
18429 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
18430 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
18431 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
18432 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
18433 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
18434 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
18435 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
18436 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
18437 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
18438 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
18439 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
18440 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18443 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18444 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18445 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
18446 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18447 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
18449 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
18451 cup=\E[%i%p1%d;%p2%dH$<30>,
18452 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
18453 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
18454 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
18455 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18456 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18457 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18458 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
18460 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
18462 cup=\E[%i%p1%d;%p2%dH$<30>,
18463 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18465 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18468 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
18469 am, hs, mir, msgr, xenl, xon,
18470 cols#80, lines#24, nlab#32,
18471 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18472 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18473 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18474 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
18475 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18476 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18477 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18478 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18479 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18480 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
18481 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
18482 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
18483 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
18484 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18486 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18487 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
18488 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
18489 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
18490 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
18491 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
18492 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
18493 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
18494 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18495 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18496 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
18497 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
18498 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18500 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18503 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18504 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18505 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
18506 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18507 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
18509 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
18511 cup=\E[%i%p1%d;%p2%dH$<30>,
18512 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
18514 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
18517 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
18518 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18519 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18520 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18521 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
18523 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
18525 cup=\E[%i%p1%d;%p2%dH$<30>,
18526 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18528 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18531 # This terminfo file contains color capabilities for the Wyse325 emulation of
18532 # the NCR 2900/260C color terminal. Because of the structure of the command
18533 # (escape sequence) used to set color attributes, one of the fore/background
18534 # colors must be preset to a given value. I have set the background color to
18535 # black. The user can change this setup by altering the last section of the
18536 # 'setf' definition. The escape sequence to set color attributes is
18537 # ESC d y <foreground_color> <background_color> 1
18538 # In addition, the background color can be changed through the desk accessories.
18539 # The capability 'op' sets colors to green on black (default combination).
18541 # NOTE: The NCR Unix System Administrator's Shell will not function properly
18542 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
18543 # capability and recompile if you wish to have it included.
18545 ncr260wy325pp|NCR 2900_260 wyse 325,
18546 am, bw, hs, km, mc5i, mir, msgr, xon,
18547 colors#16, cols#80, lines#24, ncv#33, nlab#32,
18548 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18549 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
18550 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18551 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18552 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18553 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
18554 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18555 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18557 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18558 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
18559 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
18560 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
18561 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
18562 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
18563 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
18564 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
18565 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18566 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
18567 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18568 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18569 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18570 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18571 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18574 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18575 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18576 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
18577 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
18578 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
18579 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
18580 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
18581 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18583 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
18585 cup=\Ea%i%p1%dR%p2%dC$<30>,
18586 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18588 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18591 # This definition for Wyse 350 supports several attributes. This means
18592 # that it has magic cookies (extra spaces where the attributes begin).
18593 # Some applications do not function well with magic cookies. The System
18594 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18595 # If supporting various attributes is not vital, 'xmc#1' and the extra
18596 # attributes can be removed.
18597 # Mapping to ASCII character set ('acsc' capability) can also be
18598 # restored if needed.
18599 # In addition, color capabilities have been added to this file. The drawback,
18600 # however, is that the background color has to be black. The foreground colors
18601 # are numbered 0 through 15.
18603 # NOTE: The NCR Unix System Administrator's Shell does not function properly
18604 # with the 'pairs' capability defined as below. If you wish to
18605 # have it included, Un-comment it and recompile (using 'tic').
18607 ncr260wy350pp|NCR 2900_260 wyse 350,
18608 am, bw, hs, km, mc5i, mir, msgr, xon,
18609 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
18610 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18611 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18612 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
18614 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18615 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
18616 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18617 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18619 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18620 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18621 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18622 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18623 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18624 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18625 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18626 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18627 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18628 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18629 mc0=\EP$<10>, mc4=^T, mc5=^R,
18630 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
18631 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18632 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18633 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18636 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18637 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18638 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
18639 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
18640 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
18641 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
18642 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
18643 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18645 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
18647 cup=\Ea%i%p1%dR%p2%dC$<30>,
18648 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18650 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18653 # This definition for Wyse 50+ supports several attributes. This means
18654 # that it has magic cookies (extra spaces where the attributes begin).
18655 # Some applications do not function well with magic cookies. The System
18656 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18657 # If supporting various attributes is not vital, 'xmc#1' and the extra
18658 # attributes can be removed.
18659 # Mapping to ASCII character set ('acsc' capability) can also be
18660 # restored if needed.
18661 # (ncr260wy50+pp: originally contained commented-out
18662 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
18663 ncr260wy50+pp|NCR 2900_260 wyse 50+,
18664 am, bw, hs, km, mc5i, mir, msgr, xon,
18665 cols#80, lines#24, nlab#32, xmc#1,
18666 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
18667 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18668 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18669 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
18670 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18671 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
18672 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
18674 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18675 \Ee4\Ex@\E`9\Ee7$<100>,
18676 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18677 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18678 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18679 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18680 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18681 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18682 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18683 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18684 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18685 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18686 mc0=\EP$<10>, mc4=^T, mc5=^R,
18687 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18688 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18689 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18690 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18691 \Ee4\Ex@\E`9\Ee7$<100>,
18692 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
18693 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
18694 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
18696 cup=\Ea%i%p1%dR%p2%dC$<30>,
18697 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18698 \Ee4\Ex@\E`9\Ee7$<200>,
18699 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18700 \Ee4\Ex@\E`9\Ee7$<200>,
18702 ncr260wy60pp|NCR 2900_260 wyse 60,
18703 am, bw, hs, km, mc5i, mir, msgr, xon,
18704 cols#80, lines#24, nlab#32,
18705 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18706 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
18707 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18708 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18709 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18710 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
18711 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
18713 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18714 \Ee4\Ex@\E`9\Ee7$<100>,
18715 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18716 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
18717 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18718 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18719 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
18720 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
18721 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
18722 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
18723 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
18724 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18725 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18726 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
18727 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18728 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18729 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18730 \Ee4\Ex@\E`9\Ee7$<100>,
18731 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
18732 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
18734 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
18736 cup=\Ea%i%p1%dR%p2%dC$<30>,
18737 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18738 \Ee4\Ex@\E`9\Ee7$<100>,
18739 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18740 \Ee4\Ex@\E`9\Ee7$<100>,
18742 ncr160vppp|NCR 2900_160 viewpoint,
18744 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
18746 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
18748 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
18750 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
18751 use=ncr260vt100wan,
18752 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
18753 use=ncr260vt100wpp,
18754 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
18756 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
18758 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
18759 use=ncr260vt200wan,
18760 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
18761 use=ncr260vt200wpp,
18762 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
18764 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
18766 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
18767 use=ncr260vt300wan,
18768 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
18769 use=ncr260vt300wpp,
18770 ncr160wy50+pp|NCR 2900_160 wyse 50+,
18772 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
18773 use=ncr260wy50+wpp,
18774 ncr160wy60pp|NCR 2900_160 wyse 60,
18776 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
18778 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
18779 am, hs, mc5i, mir, msgr, xon,
18780 cols#80, it#8, lines#24, nlab#32,
18781 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
18782 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
18783 clear=\E[2J\E[1;1H$<300>, cr=\r,
18784 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
18785 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
18786 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
18787 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
18788 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
18789 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
18790 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
18791 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
18792 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
18794 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
18795 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
18796 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
18797 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
18798 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
18799 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
18800 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
18801 B\E)0\E%/0n\E[P\031$<200>,
18803 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
18804 %p3%|%t;7%;%?%p4%t;5%;m$<100>,
18805 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
18806 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
18808 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
18810 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
18811 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
18812 \E)0\E%/0n\E[P\031$<200>,
18815 # Vendor-supplied NCR termcaps end here
18817 # NCR7900 DIP switches:
18821 # 5 - Parity (Odd/Even)
18822 # 6 - Don't Send or Do Send Spaces
18823 # 7 - Parity Enable
18824 # 8 - Stop Bits (One/Two)
18827 # 1 - Upper/Lower Shift
18828 # 2 - Typewriter Shift
18829 # 3 - Half Duplex / Full Duplex
18830 # 4 - Light/Dark Background
18831 # 5-6 - Carriage Return Without / With Line Feed
18832 # 7 - Extended Mode
18833 # 8 - Suppress Keyboard Display
18836 # 1 - End of line entry disabled/enabled
18837 # 2 - Conversational mode / (Local?) Mode
18838 # 3 - Control characters displayed / not displayed
18839 # 4 - (2-wire?) / 4-wire communications
18840 # 5 - RTS on and off for each character
18841 # 6 - (50Hz?) / 60 Hz
18842 # 7 - Exit after level zero diagnostics
18843 # 8 - RS-232 interface
18846 # 1 - Reverse Channel (yes / no)
18847 # 2 - Manual answer (no / yes)
18848 # 3-4 - Cursor appearance
18849 # 5 - Communication Rate
18850 # 6 - Enable / Disable EXT turnoff
18851 # 7 - Enable / Disable CR turnoff
18852 # 8 - Enable / Disable backspace
18854 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
18855 # reverse, blink, dim, and underline) the appropriate number of bits (by
18856 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
18857 # '@' is (effectively) "or"ed with each attribute to generate the proper third
18858 # character in the <ESC>0 sequence. The <sgr> string implements the following
18861 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
18862 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
18864 # Where: P1 <==> Standout attribute parameter
18865 # P2 <==> Underline attribute parameter
18866 # P3 <==> Reverse attribute parameter
18867 # P4 <==> Blink attribute parameter
18868 # P5 <==> Dim attribute parameter
18869 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
18870 ncr7900i|ncr7900|n7900|ncr 7900 model 1,
18872 cols#80, lines#24, xmc#1,
18873 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18874 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
18875 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
18876 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
18878 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18880 sgr0=\E0@, smso=\E0Q, smul=\E0`,
18881 ncr7900iv|ncr 7900 model 4,
18884 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
18885 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
18886 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
18887 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
18888 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
18889 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
18890 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
18891 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
18892 # The user can enter a CTRL-B to get out of this locked state.
18893 # In <hpa>, we want to output the character given by the formula:
18894 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
18895 ncr7901|ncr 7901 model,
18898 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
18899 cub1=^H, cud1=\n, cuf1=^F,
18900 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
18902 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
18903 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
18904 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
18905 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18907 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
18908 vpa=\013%p1%{64}%+%c,
18910 # Newbury Data Recording Limited (Newbury Data)
18912 # Have been manufacturing and reselling various peripherals for a long time
18913 # They don't make terminals anymore, but are still in business (in 2007).
18914 # Their e-mail address is at ndsales@newburydata.co.uk
18915 # and their post address is:
18917 # Newbury Data Recording Ltd,
18918 # Premier Park, Road One,
18919 # Winsford, Cheshire, CW7 3PT
18921 # Their technical support is still good, they sent me for free a printed copy
18922 # of the 9500 user manual and I got it just 1 week after I first contacted them
18926 # Manufactured in the early/mid eighties, behaves almost the same as a
18927 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
18928 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
18929 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
18930 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
18931 # recognized: if you type in "ESC !", the next (third) character is not
18932 # echoed, showing that the terminal was actually waiting for a parameter!
18933 ndr9500|nd9500|Newbury Data 9500,
18934 am, bw, hs, mc5i, mir, msgr, ul, xon,
18935 cols#80, lines#24, wsl#79,
18936 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
18937 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
18938 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18939 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
18940 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
18941 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
18942 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
18943 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
18944 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18945 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
18946 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
18947 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18948 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18949 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
18950 pfloc=\E|%{48}%p1%+%c2%p2\031,
18951 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
18952 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
18953 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
18954 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
18955 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
18957 ndr9500-nl|NDR 9500 with no status line,
18960 dsl@, fsl@, tsl@, use=ndr9500,
18962 ndr9500-25|NDR 9500 with 25th line enabled,
18963 lines#25, use=ndr9500,
18965 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
18966 lines#25, use=ndr9500-nl,
18968 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
18971 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
18972 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
18973 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
18974 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
18976 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
18977 lines#25, use=ndr9500-mc,
18979 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
18982 dsl@, fsl@, tsl@, use=ndr9500-mc,
18984 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
18985 lines#25, use=ndr9500-mc-nl,
18987 #### Perkin-Elmer (Owl)
18989 # These are official terminfo entries from within Perkin-Elmer.
18992 bantam|pe550|pe6100|perkin elmer 550,
18995 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18996 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18997 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
18998 fox|pe1100|perkin elmer 1100,
19001 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19002 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19003 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
19004 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
19005 owl|pe1200|perkin elmer 1200,
19008 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
19009 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19010 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
19011 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
19012 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
19013 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
19014 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
19015 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
19016 pe1251|pe6300|pe6312|perkin elmer 1251,
19018 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
19019 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
19020 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
19021 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
19022 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
19023 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
19024 # (pe7000m: this had
19025 # rmul=\E!\0, smul=\E!\040,
19026 # which is probably wrong, it collides with kf0
19027 pe7000m|perkin elmer 7000 series monochrome monitor,
19030 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
19031 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19032 ed=\EJ, el=\EI, home=\EH, ind=\n,
19033 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
19034 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
19035 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
19036 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
19038 pe7000c|perkin elmer 7000 series colour monitor,
19039 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
19040 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
19044 # Sperry Univac has merged with Burroughs to form Unisys.
19047 # This entry is for the Sperry UTS30 terminal running the TTY
19048 # utility under control of CP/M Plus 1R1. The functionality
19049 # provided is comparable to the DEC vt100.
19050 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
19051 uts30|sperry uts30 with cp/m@1R1,
19053 cols#80, lines#24, wsl#40,
19054 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19055 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
19056 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
19057 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19058 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19059 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
19060 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
19061 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
19062 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
19063 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
19064 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
19065 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
19066 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
19067 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
19068 smul=\E[4m, tsl=\E], uc=\EPB,
19072 # Tandem builds these things for use with its line of fault-tolerant
19073 # transaction-processing computers. They aren't generally available
19074 # on the merchant market, and so are fairly uncommon.
19077 tandem6510|adm3a repackaged by Tandem,
19080 # A funny series of terminal that TANDEM uses. The actual model numbers
19081 # have a fourth digit after 653 that designates minor variants. These are
19082 # natively block-mode and rather ugly, but they have a character mode which
19083 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
19084 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
19085 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
19086 tandem653|t653x|Tandem 653x multipage terminal,
19087 OTbs, am, da, db, hs,
19088 cols#80, lines#24, wsl#64, xmc#1,
19089 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
19090 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
19091 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
19092 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
19094 #### Tandy/Radio Shack
19096 # Tandy has a line of VDTs distinct from its microcomputers.
19099 dmterm|deskmate terminal,
19102 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
19103 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19104 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
19105 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
19106 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
19107 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
19108 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
19109 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
19111 dt100|dt-100|Tandy DT-100 terminal,
19113 cols#80, lines#24, xmc#1,
19114 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
19115 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
19116 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
19117 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19118 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19119 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
19120 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
19121 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
19122 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
19123 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
19124 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
19125 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19126 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
19127 cols#132, use=dt100,
19128 dt110|Tandy DT-110 emulating ansi,
19131 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
19132 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
19133 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
19134 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
19135 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
19136 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
19137 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
19138 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
19139 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
19140 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
19141 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
19142 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19143 smacs=^N, smso=\E[7m, smul=\E[4m,
19144 pt210|TRS-80 PT-210 printing terminal,
19147 bel=^G, cr=\r, cud1=\n, ind=\n,
19149 #### Tektronix (tek)
19151 # Tektronix tubes are graphics terminals. Most of them use modified
19152 # oscilloscope technology incorporating a long-persistence green phosphor,
19153 # and support vector graphics on a main screen with an attached "dialogue
19154 # area" for interactive text.
19157 tek|tek4012|tektronix 4012,
19160 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
19161 ff=\014$<1000>, is2=\E^O,
19162 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19163 tek4013|tektronix 4013,
19164 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
19165 tek4014|tektronix 4014,
19167 is2=\E\017\E9, use=tek4012,
19168 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19169 tek4015|tektronix 4015,
19170 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
19171 tek4014-sm|tektronix 4014 in small font,
19172 cols#121, lines#58,
19173 is2=\E\017\E\:, use=tek4014,
19174 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
19175 tek4015-sm|tektronix 4015 in small font,
19176 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
19177 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
19179 # You need to have "stty nl2" in effect. Some versions of tset(1) know
19180 # how to set it for you.
19182 # It's got the Magic Cookie problem around stand-out mode. If you can't
19183 # live with Magic Cookie, remove the :so: and :se: fields and do without
19184 # reverse video. If you like reverse video stand-out mode but don't want
19185 # it to flash, change the letter 'H' to 'P' in the :so: field.
19186 tek4023|tektronix 4023,
19188 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
19189 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
19190 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
19191 rmso=^_@, smso=^_P,
19192 # It is recommended that you run the 4025 at 4800 baud or less;
19193 # various bugs in the terminal appear at 9600. It wedges at the
19194 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
19195 # on keyboard don't work. You have to hit BREAK twice to get
19196 # one break at any speed - this is a documented feature.
19197 # Can't use cursor motion because it's memory relative, and
19198 # because it only works in the workspace, not the monitor.
19199 # Same for home. Likewise, standout only works in the workspace.
19201 # <el> was commented out since vi and rogue seem to work better
19202 # simulating it with lots of spaces!
19204 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
19205 # and didn't seem necessary.
19207 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
19209 cols#80, it#8, lines#34, lm#0,
19210 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
19211 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
19212 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
19213 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
19214 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
19215 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
19216 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
19218 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
19219 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
19221 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
19222 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
19223 tek4025-17|tek 4025 17 line window,
19224 lines#17, use=tek4025,
19225 tek4025-17-ws|tek 4025 17 line window in workspace,
19226 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
19227 \r\037wor\s17\r\037mon\s17\r,
19228 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
19229 smso=\037att e\r, use=tek4025-17,
19230 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
19231 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
19232 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
19234 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
19235 # The following status modes are assumed for normal operation (replace the
19236 # initial "!" by whatever the current command character is):
19237 # !COM 29 # NOTE: changes command character to GS (^])
19243 # ^]STO 9 17 25 33 41 49 57 65 73
19244 # Other modes may be set according to communication requirements.
19245 # If the command character is inadvertently changed, termcap can't restore it.
19246 # Insert-character cannot be made to work on both top and bottom rows.
19247 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
19248 # There also seems to be a problem with vertical motion, perhaps involving
19249 # delete/insert-line, following a typed carriage return. This terminal sucks.
19250 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19251 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
19252 # work any more. -- esr)
19253 tek4025a|Tektronix 4025A,
19254 OTbs, OTpt, am, bw, da, db, xon,
19255 cols#80, it#8, lines#34,
19256 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
19257 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
19258 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
19259 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
19260 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
19261 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
19262 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
19263 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
19264 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
19265 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
19266 \s33\s41\s49\s57\s65\s73\035wor\s0;,
19268 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
19269 # Here's the command file that I use to get rogue to work on the 4025.
19270 # It should work with any program using the old curses (e.g. it better
19271 # not try to scroll, or cursor addressing won't work. Also, you can't
19273 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
19274 tek4025-cr|tek 4025 for curses and rogue,
19276 cols#80, it#8, lines#33,
19277 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
19278 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
19279 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
19280 rmcup=\037wor 0, smcup=\037wor 33h,
19281 # next two lines commented out since curses only allows 128 chars, sigh.
19282 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
19283 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
19284 tek4025ex|4025ex|4027ex|tek 4025 w/!,
19285 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
19287 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
19288 tek4105|tektronix 4105,
19289 OTbs, am, mir, msgr, ul, xenl, xt,
19290 cols#79, it#8, lines#29,
19291 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
19292 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
19293 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
19294 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19295 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
19296 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
19297 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
19298 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
19299 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
19300 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19301 smul=\E[=5;<2m, tbc=\E[1g,
19303 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
19304 tek4105-30|4015 emulating 30 line vt100,
19305 am, mir, msgr, xenl, xon,
19306 cols#80, it#8, lines#30, vt#3,
19307 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19308 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
19309 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19310 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19311 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19312 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19313 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
19314 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
19315 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
19316 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19317 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
19318 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19319 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
19320 %;m%?%p9%t\016%e\017%;$<2>,
19321 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
19322 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
19325 # Tektronix 4105 from BRL
19326 # The following setup modes are assumed for normal operation:
19327 # CODE ansi CRLF no DABUFFER 141
19328 # DAENABLE yes DALINES 30 DAMODE replace
19329 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
19330 # FLAGGING input INSERTREPLACE replace LFCR no
19331 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
19332 # SELECTCHARSET G1 0 TABS -2
19333 # Other setup modes may be set for operator convenience or communication
19334 # requirements; I recommend
19335 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19336 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19337 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19338 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
19339 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19340 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
19342 # and factory color maps. After setting these modes, save them with NVSAVE. No
19343 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19344 # "IC" cannot be used in combination with "im" & "ei".
19345 # "tek4105a" is just a guess:
19346 tek4105a|Tektronix 4105,
19347 OTbs, OTpt, msgr, xon,
19348 OTkn#8, cols#80, it#8, lines#30, vt#3,
19349 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19350 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19351 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19352 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19353 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19354 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19355 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19356 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19357 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
19358 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
19359 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
19360 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
19361 ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19362 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
19363 rmso=\E[m, rmul=\E[m,
19364 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19365 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
19366 \E[?7;8h\E[r\E[m\E>,
19367 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19368 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19372 # Tektronix 4106/4107/4109 from BRL
19373 # The following setup modes are assumed for normal operation:
19374 # CODE ansi COLUMNMODE 80 CRLF no
19375 # DABUFFER 141 DAENABLE yes DALINES 32
19376 # DAMODE replace DAVISIBILITY yes ECHO no
19377 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
19378 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
19379 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
19381 # Other setup modes may be set for operator convenience or communication
19382 # requirements; I recommend
19383 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19384 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19385 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19386 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
19387 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19388 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
19390 # and factory color maps. After setting these modes, save them with NVSAVE. No
19391 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19392 # "IC" cannot be used in combination with "im" & "ei".
19393 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
19395 cols#80, it#8, lines#32, vt#3,
19396 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19397 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19398 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19399 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19400 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19401 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19402 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19403 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19404 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
19405 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
19406 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
19407 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
19408 ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19409 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
19410 rmso=\E[m, rmul=\E[m,
19411 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19412 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
19413 ;5l\E[?7;8h\E[r\E[m\E>,
19414 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19415 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
19418 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
19419 # 0 selects Tek mode, i.e., \E%!0
19420 # 1 selects ANSI mode
19421 # 2 selects ANSI edit-mode
19422 # 3 selects VT52 mode
19424 # One odd thing about the description (which has been unchanged since the 90s)
19425 # is that the cursor addressing is using VT52 mode, and a few others use the
19426 # VT52's non-CSI versions of ANSI, e.g., \EJ.
19427 tek4107|tek4109|tektronix terminals 4107 4109,
19428 OTbs, am, mir, msgr, ul, xenl, xt,
19429 cols#79, it#8, lines#29,
19430 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
19431 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
19432 cub1=^H, cud1=\n, cuf1=\EC,
19433 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
19434 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
19435 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19436 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
19437 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
19438 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
19439 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
19440 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
19441 smul=\E%!1\E[4m$<2>\E%!0,
19442 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
19443 # see the note attached to tek4207.
19444 tek4207-s|Tektronix 4207 with sysline but no memory,
19446 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
19447 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19448 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19449 is2=\E7\E[?6l\E[2K\E[?6h\E8,
19450 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
19452 # The 4110 series may be a wonderful graphics series, but they make the 4025
19453 # look good for screen editing. In the dialog area, you can't move the cursor
19454 # off the bottom line. Out of the dialog area, ^K moves it up, but there
19455 # is no way to scroll.
19457 # Note that there is a floppy for free from Tek that makes the
19458 # 4112 emulate the vt52 (use the vt52 termcap). There is also
19459 # an expected enhancement that will use ANSI standard sequences.
19461 # 4112 in non-dialog area pretending to scroll. It really wraps
19462 # but vi is said to work (more or less) in this mode.
19464 # 'vi' works reasonably well with this entry.
19466 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
19469 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
19470 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
19471 # The 4112 with the ANSI compatibility enhancement
19472 tek4112|tek4114|tektronix 4110 series,
19475 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
19476 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
19477 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
19478 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
19479 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19480 tek4112-nd|4112 not in dialog area,
19482 cuu1=^K, use=tek4112,
19483 tek4112-5|4112 in 5 line dialog area,
19484 lines#5, use=tek4112,
19485 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
19486 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
19487 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
19488 # previously \0410 and \0411 sequences...I don't *think* they were supposed
19489 # to be 4-digit octal -- esr)
19490 tek4113|tektronix 4113 color graphics with 5 line dialog area,
19493 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
19494 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
19496 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
19497 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
19499 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
19500 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
19501 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
19502 # :vb: needs enough delay to let you see the background color being toggled.
19503 tek4113-nd|tektronix 4113 color graphics with no dialog area,
19505 cols#80, it#8, lines#34,
19506 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
19508 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
19510 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
19511 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
19512 # This entry is from Tek. Inc. (Brian Biehl)
19513 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
19514 otek4115|Tektronix 4115,
19515 OTbs, am, da, db, eo,
19516 cols#80, it#8, lines#34,
19517 cbt=\E[Z, clear=\E[H\E[2J,
19518 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
19519 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19520 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
19521 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
19523 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
19524 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
19525 kbs=^H, ri=\EM, rmam=\E[?7l,
19526 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
19527 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
19528 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
19530 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
19533 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
19534 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19535 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19536 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
19537 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
19538 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19539 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
19540 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
19541 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
19542 rmso=\E[m, rmul=\E[m,
19543 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
19545 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19546 vpa=\E[%p1%{1}%+%dd,
19547 # The tek4125 emulates a vt100 incorrectly - the scrolling region
19548 # command is ignored. The following entry replaces <csr> with the needed
19549 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
19550 # chokes on; and adds a lot of initialization for the tek dialog area.
19551 # Note that this entry uses all 34 lines and sets the cursor color to green.
19552 # Steve Jacobson 8/85
19553 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
19554 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
19555 tek4125|tektronix 4125,
19557 csr@, dl1=\E[1M, il1=\E[1L,
19558 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
19559 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
19561 rc@, sc@, smkx=\E=, use=vt100+4bsd,
19563 # From: <jcoker@ucbic>
19564 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
19565 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
19566 # note that if jcoker wasn't confused you may be able to use this one.
19567 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
19568 tek4207|Tektronix 4207 graphics terminal with memory,
19569 am, bw, mir, msgr, ul, xenl,
19570 cols#80, it#8, lines#32,
19571 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
19572 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19573 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
19574 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
19575 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
19576 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19577 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19578 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
19579 rev=\E[7m, ri=\E[T,
19580 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
19581 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
19582 smul=\E[4m, tbc=\E[1g,
19584 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
19585 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
19586 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
19587 tek4404|tektronix 4404,
19589 cols#80, it#8, lines#32,
19590 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
19591 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19592 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
19593 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
19594 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
19595 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
19596 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19597 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
19598 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
19599 # Some unknown person wrote:
19600 # I added the is string - straight Unix has ESC ; in the login
19601 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
19602 # mode). The is string here cleans up a few things (but not
19604 ct8500|tektronix ct8500,
19607 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
19608 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
19609 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
19610 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
19611 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
19613 # Tektronix 4205 terminal.
19615 # am is not defined because the wrap around occurs not when the char.
19616 # is placed in the 80'th column, but when we are attempting to type
19617 # the 81'st character on the line. (esr: hmm, this is like the vt100
19618 # version of xenl, perhaps am + xenl would work!)
19620 # Bold, dim, and standout are simulated by colors and thus not allowed
19621 # with colors. The tektronix color table is mapped into the RGB color
19622 # table by setf/setb. All colors are reset to factory specifications by oc.
19623 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
19624 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
19625 # interval then maps into pre-defined value.
19626 tek4205|tektronix 4205,
19628 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
19629 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19630 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
19631 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
19632 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19633 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19634 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
19635 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
19636 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
19638 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
19639 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
19640 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
19641 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
19642 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
19643 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
19644 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
19645 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
19646 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
19648 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
19649 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
19650 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
19652 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
19654 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
19655 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
19656 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19657 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19659 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19660 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19662 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
19663 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19664 smul=\E[4m, tbc=\E[1g,
19666 #### Teletype (tty)
19668 # These are the hardcopy Teletypes from before AT&T bought the company,
19669 # clattering electromechanical dinosaurs in Bakelite cases that printed on
19670 # pulpy yellow roll paper. If you remember these you go back a ways.
19671 # Teletype-branded VDTs are listed in the AT&T section.
19673 # The earliest UNIXes were designed to use these clunkers; nroff and a few
19674 # other programs still default to emitting codes for the Model 37.
19677 tty33|tty35|model 33 or 35 teletype,
19680 bel=^G, cr=\r, cud1=\n, ind=\n,
19681 tty37|model 37 teletype,
19683 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
19686 # There are known to be at least three flavors of the tty40, all seem more
19687 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
19688 # awful braindamage, such as printing a visible newline indicator after each
19689 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
19690 # braindamaged but has hope and is described here. The 40-4 is a 3270
19691 # lookalike and beyond hope. The terminal has visible bell but I don't know
19692 # it - it's null here to prevent it from showing the BL character.
19693 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
19694 # a "newline" style terminal (-crmode) vi figures all it needs is nl
19695 # to get crlf, even if <cr> is not ^M.)
19696 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
19697 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
19700 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
19701 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
19702 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
19703 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
19704 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
19705 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
19706 tty43|model 43 teletype,
19707 OTbs, am, hc, os, xon,
19709 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
19714 # You can add <is2=\E<> to put this 40-column mode, though I can't
19715 # for the life of me think why anyone would want to.
19716 scanset|sc410|sc415|Tymshare Scan Set,
19719 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
19720 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19721 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
19722 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
19723 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
19725 #### Volker-Craig (vc)
19727 # If you saw a Byte Magazine cover with a terminal on it during the early
19728 # 1980s, it was probably one of these. Carl Helmers liked them because
19729 # they could crank 19.2 and were cheap (that is, he liked them until he tried
19730 # to program one...)
19733 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
19734 # every other linefeed.
19735 vc303|vc103|vc203|volker-craig 303,
19738 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19739 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
19740 kcuu1=^N, ll=\017$<1>W,
19741 vc303a|vc403a|volker-craig 303a,
19742 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
19743 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
19744 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
19745 vc404|volker-craig 404,
19748 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19749 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19750 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
19751 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
19752 vc404-s|volker-craig 404 w/standout mode,
19753 cud1=\n, rmso=^O, smso=^N, use=vc404,
19754 # From: <wolfgang@cs.sfu.ca>
19755 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
19756 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
19759 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
19760 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
19761 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
19762 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
19763 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
19764 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
19765 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
19766 rmso=\E^_, smso=\E^Y,
19767 vc415|volker-craig 415,
19768 clear=^L, use=vc404,
19770 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
19773 #### IBM PC and clones
19776 # The pcplot IBM-PC terminal emulation program is really messed up. It is
19777 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
19778 # doesn't support scrolling regions, ignores add line commands, and ignores
19779 # delete line commands. Consequently, the resulting behavior looks like a
19780 # crude adm3a-type terminal.
19781 # Steve Jacobson 8/85
19782 pcplot|pc-plot terminal emulation program,
19784 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
19785 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
19786 # I've found that my KayPro II, running MDM730, continues to emulate an
19787 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
19788 # system the following termcap entry works well:
19789 # I have noticed a couple of minor glitches, but nothing I can't work
19790 # around. (I added two capabilities from the BRL entry -- esr)
19791 kaypro|kaypro2|kaypro II,
19794 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
19795 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
19796 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
19798 # From IBM, Thu May 5 19:35:27 1983
19799 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
19800 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
19803 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
19804 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
19806 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
19807 OTbs, am, bw, eo, hs, km, msgr, ul,
19808 cols#80, it#8, lines#24,
19809 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
19811 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
19812 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19813 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19814 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
19815 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
19816 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
19817 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19818 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
19819 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
19820 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
19821 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
19822 rmso=\E[m, rmul=\E[m,
19823 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
19825 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19829 # Apple II firmware console first, then various 80-column cards and
19830 # terminal emulators. For two cents I'd toss all these in the UFO file
19831 # along with the 40-column apple entries.
19834 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
19835 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
19836 # function of TIC, not the firmware.
19837 # The clear key on a IIgs will do something like clear-screen,
19838 # depending on what you're in.
19839 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
19840 OTbs, am, bw, eo, msgr,
19841 cols#80, it#8, lines#24,
19842 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
19843 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19844 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
19845 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
19847 # Apple //e with 80-column card, entry from BRL
19848 # The modem interface is permitted to discard LF (maybe DC1), otherwise
19849 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
19850 # Auto-wrap does not work right due to newline scrolling delay, which also
19851 # requires that you set "stty cr2".
19852 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
19853 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
19854 # using a terminal emulation program instead of the built-in firmware.
19858 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
19859 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
19860 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
19861 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19863 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
19864 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
19865 apple2e-p|Apple //e via Pascal,
19866 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
19867 kcud1=\n, use=apple2e,
19868 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
19869 # Enable DC3/DC1 flow control with "stty ixon -ixany".
19870 apple-ae|ASCII Express,
19871 OTbs, am, bw, msgr, nxon, xon,
19872 cols#80, it#8, lines#24,
19873 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19874 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19875 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
19876 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19878 appleII|apple ii plus,
19880 cols#80, it#8, lines#24,
19881 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
19882 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
19883 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
19884 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
19885 # Originally by Gary Ford 21NOV83
19886 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
19887 apple-80|apple II with smarterm 80 col,
19890 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
19891 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
19892 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
19893 apple-soroc|apple emulating soroc 120,
19896 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19897 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
19898 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19899 # From Peter Harrison, Computer Graphics Lab, San Francisco
19900 # ucbvax!ucsfmis!harrison .....uucp
19901 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
19902 # "These two work. If you don't have the inverse video chip for the
19903 # Apple with videx then remove the :so: and :se: fields."
19904 # (apple-videx: this used to be called DaleApple -- esr)
19905 apple-videx|Apple with videx videoterm 80 column board with inverse video,
19907 cols#80, it#8, lines#24,
19908 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
19909 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19910 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
19911 rmso=^Z2, sgr0=^Z2, smso=^Z3,
19912 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
19913 # Apple Cat ][ 212 modem, + more all
19914 # controlled by ASCII Express: Pro.
19915 # From Dave Shaver <isucs1!shaver>
19916 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
19919 acsc=, clear=^L, cuf1=^\,
19920 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19921 flash=^W35^W06, home=^Y,
19922 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
19924 apple-uterm|Ultraterm for Apple micros,
19927 acsc=, clear=^L, cuf1=^\,
19928 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19929 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
19930 # from trwrba!bwong (Bradley W. Wong):
19932 # This entry assumes that you are using an apple with the UCSD Pascal
19933 # language card. SYSTEM.MISCINFO is assumed to be the same as that
19934 # supplied with the standard apple except that screenwidth should be set
19935 # using SETUP to 80 columns. Note that the right arrow is not mapped in
19936 # this termcap entry. This is because that key, on the Apple, transmits
19937 # a ^U and would thus preempt the more useful "up" function of vi.
19940 apple80p|80-column apple with Pascal card,
19943 clear=^Y^L, cuf1=^\\:,
19944 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19947 # Apple II+ equipped with Videx 80 column card
19949 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
19950 # manually converted by D A Gwyn
19952 # DO NOT use any terminal emulation with this data base, it works directly
19953 # with the Videx card. This has been tested with vi 1200 baud and works fine.
19955 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
19956 # 1 screen, while in R2 ^U doesn't.
19957 # For inverse alternate character set add:
19958 # <smacs>=^O:<rmacs>=^N:
19959 # (apple-v: added it#8 -- esr)
19960 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
19962 cols#80, it#8, lines#24,
19963 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
19964 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
19965 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
19966 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
19967 khome=^Y, rmso=^Z2, smso=^Z3,
19968 apple-videx3|vapple|Apple II with 80 col card,
19971 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
19972 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
19973 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19974 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
19975 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
19976 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
19977 aepro|Apple II+ running ASCII Express Pro--vt52,
19980 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
19981 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19983 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
19984 apple-vm80|ap-vm80|apple with viewmax-80,
19987 clear=\014$<300/>, cuf1=^\\:,
19988 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
19989 ed=\013$<300/>, el=^], home=\031$<200/>,
19991 #### Apple Lisa & Macintosh
19994 # (lisa: changed <cvvis> to <cnorm> -- esr)
19995 lisa|apple lisa console display (black on white),
19996 OTbs, am, eo, msgr,
19997 cols#88, it#8, lines#32,
19998 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
19999 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
20000 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20001 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
20002 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20003 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20004 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
20005 liswb|apple lisa console display (white on black),
20006 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
20007 smso=\E[m, smul=\E[4m, use=lisa,
20009 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
20010 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
20012 # These entries assume that the 'Auto Wraparound' is enabled.
20013 # Xon-Xoff flow control should also be enabled.
20015 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
20016 # settings are in non-volatile memory and don't need to be reset upon login.
20017 # Also setting the number of columns glitches the screen annoyingly.
20018 # You can type "reset" to get them set.
20020 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
20021 OTbs, OTpt, am, xenl, xon,
20022 OTkn#4, cols#80, it#8, lines#24, vt#3,
20023 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
20024 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20025 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20026 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20027 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
20028 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
20029 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
20030 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20031 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
20032 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
20034 # Lisaterm in 132 column ("wide") mode.
20035 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
20037 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
20038 # Although MacTerminal has insert/delete line, it is commented out here
20039 # since it is much faster and cleaner to use the "lock scrolling region"
20040 # method of inserting and deleting lines due to the MacTerminal implementation.
20041 # Also, the "Insert/delete ch" strings have an extra character appended to them
20042 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
20043 # supported by MacTerminal.
20044 mac|macintosh|Macintosh with MacTerminal,
20047 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
20048 # Lisaterm in 132 column ("wide") mode.
20049 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
20052 #### Radio Shack/Tandy
20055 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
20056 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
20057 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
20058 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
20060 cols#80, it#8, lines#24,
20061 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
20062 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
20063 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
20064 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
20065 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
20066 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
20067 # (trs2: removed obsolete ":nl=^_:" -- esr)
20068 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
20070 cols#80, it#8, lines#24,
20071 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
20072 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
20073 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
20074 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
20075 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
20076 # (This had extension capabilities
20077 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
20078 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
20079 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
20080 trs16|trs-80 model 16 console,
20082 cols#80, it#8, lines#24,
20083 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
20084 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20085 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20086 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20087 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20088 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
20089 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
20090 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
20091 smacs=\ERG, smso=\ERD,
20093 #### Commodore Business Machines
20095 # Formerly located in West Chester, PA; went spectacularly bust in 1994
20096 # after years of shaky engineering and egregious mismanagement. Made one
20097 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
20098 # C-128, VIC-20). The C-64 is said to have been the most popular machine
20099 # ever (most units sold); they can still be found gathering dust in closets
20103 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
20104 # Added a few more entries, converted caret-type control sequence (^x) entries
20105 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
20106 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
20108 # :as:, :ae: Support for alternate character sets.
20109 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
20110 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
20111 # This one appears to fix a problem I always had with a line ending
20112 # at 'width+1' (I think) followed by a blank line in vi. The blank
20113 # line tended to disappear and reappear depending on how the screen
20114 # was refreshed. Note that this is probably needed only if you use
20115 # something like a Dnet Fterm with the window sized to some peculiar
20116 # dimension larger than 80 columns.
20117 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
20118 # (amiga: removed obsolete :kn#10:,
20119 # also added empty <acsc> to suppress a warning --esr)
20121 OTbs, am, bw, xenl,
20123 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
20124 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
20125 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20126 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20127 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20128 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
20129 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
20130 invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20131 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
20132 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
20133 kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O,
20134 rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
20135 smso=\E[7m, smul=\E[4m, use=ecma+index,
20137 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
20138 # (amiga: added empty <acsc> to suppress a warning.
20139 # I'm told this entry screws up badly with AS225, the Amiga
20140 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
20141 amiga-h|Hans Verkuil's Amiga ANSI,
20144 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
20145 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
20146 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
20147 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
20148 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
20149 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
20150 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
20151 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
20152 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20153 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
20154 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
20155 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
20156 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
20157 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
20158 smso=\2337m, smul=\2334m,
20160 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
20162 # Pavel Fedin added
20167 amiga-8bit|Amiga ANSI using 8-bit controls,
20168 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20169 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
20170 kpp=\233T, ri=\215, rin@, use=amiga-h,
20172 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
20173 # requires use of appropriate preferences settings.
20174 amiga-vnc|Amiga using VNC console (black on light gray),
20175 am, da, db, msgr, ndscr,
20176 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
20177 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
20178 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
20179 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20180 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20181 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20182 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20183 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
20184 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
20186 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20187 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20188 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
20189 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
20190 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
20191 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
20192 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
20193 rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
20194 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
20195 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
20196 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
20197 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
20198 smso=\E[1m, smul=\E[4m, use=ecma+index,
20200 # MorphOS on Genesi Pegasos
20201 # By Pavel Fedin <sonic_amiga@rambler.ru>
20202 morphos|MorphOS on Genesi Pegasos,
20203 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
20204 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
20205 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
20206 ri=\215, rin@, use=amiga-h,
20208 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
20209 # I'm trying to write a termcap for a commodore b-128, and I'm
20210 # having a little trouble. I've had to map most of my control characters
20211 # to something that unix will accept (my delete-char is a ctrl-t, etc),
20212 # and create some functions (like cm), but thats life.
20213 # The problem is with the arrow keys - right, and up work fine, but
20214 # left deletes the previous character and down I just can't figure out.
20215 # Jove knows what I want, but I don't know what it's sending to me (it
20216 # isn't thats bound to next-line in jove).
20217 # Anybody got any ideas? Here's my termcap.
20218 # DAG -- I changed his "^n" entries to "\n"; see if that works.
20220 commodore|b-128|Commodore B-128 micro,
20222 OTdN#20, cols#80, lines#24, pb#150,
20223 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
20224 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
20225 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
20226 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
20227 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
20232 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
20233 northstar|North Star Advantage,
20237 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
20238 el=\016$<200/>, home=\034\032$<200/>,
20242 # Thu Jul 7 03:55:16 1983
20244 # As an aside, be careful; it may sound like an anomaly on the
20245 # Osborne, but with the 80-column upgrade, it's too easy to
20246 # enter lines >80 columns!
20248 # I've already had several comments...
20249 # The Osborne-1 with the 80-col option is capable of being
20250 # 52, 80, or 104 characters wide; default to 80 for compatibility
20251 # with most systems.
20253 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
20254 osborne-w|osborne1-w|osborne I in 104-column mode,
20256 cols#104, lines#24,
20257 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20258 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20259 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
20260 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
20261 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
20262 osborne|osborne1|osborne I in 80-column mode,
20263 OTbs, am, mir, msgr, ul, xhp,
20264 OTdB#4, cols#80, lines#24,
20265 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
20266 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
20267 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
20268 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
20269 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
20271 # Osborne Executive definition from BRL
20272 # Similar to tvi920
20273 # Added by David Milligan and Tom Smith (SMU)
20274 osexec|Osborne executive,
20276 OTug#1, cols#80, lines#24, xmc#1,
20277 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20278 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20279 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
20280 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
20281 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
20282 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
20283 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
20286 #### Console types for obsolete UNIX clones
20288 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
20289 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
20290 # were commercial, Minix an educational tool sold in conjunction with a book.
20291 # Memory-segmentation limits and a strong tendency to look like V7 long after
20292 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
20293 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
20294 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
20295 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
20296 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
20297 # even as single processes under SunOS and the Macintosh OS.
20301 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
20302 minix|minix console (v3),
20303 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
20304 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
20305 \301w\302x\263y\363z\362{\343|\330}\234~\376,
20306 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
20307 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
20308 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
20309 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
20310 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
20311 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
20312 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
20313 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
20314 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
20315 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
20316 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
20317 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20318 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
20321 minix-3.0|minix console (v3.0),
20322 use=ecma+color, use=minix-1.7,
20325 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
20326 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
20327 minix-1.7|minix console (v1.7),
20329 cols#80, it#8, lines#25,
20330 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
20331 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20332 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20333 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20334 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
20335 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
20336 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20337 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
20338 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
20339 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
20340 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
20341 smso=\E[7m, smul=\E[4m,
20342 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
20343 minix-old|minix-1.5|minix console (v1.5),
20345 cols#80, it#8, lines#25,
20346 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
20347 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20348 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20349 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20350 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
20351 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
20352 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20353 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
20354 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
20355 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
20356 # The linewrap option can be specified by editing /usr/include/minix/config.h
20357 # before recompiling the minix 1.5 kernel.
20358 minix-old-am|minix console with linewrap,
20361 pc-minix|minix console on an Intel box,
20362 use=klone+acs, use=minix-3.0,
20364 # According to the Coherent 2.3 manual, the PC console is similar
20365 # to a z19. The differences seem to be (1) 25 lines, (2) no status
20366 # line, (3) standout is broken, (4) ins/del line is broken, (5)
20367 # has blinking and bold.
20368 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
20370 cols#80, it#8, lines#25,
20371 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20372 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
20373 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
20374 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
20375 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
20377 # According to the Venix 1.1 manual, the PC console is similar
20378 # to a DEC vt52. Differences seem to be (1) arrow keys send
20379 # different strings, (2) enhanced standout, (3) added insert/delete line.
20380 # Note in particular that it doesn't have automatic margins.
20381 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
20382 # not described here because this derives from an old termcap entry.
20383 pc-venix|venix|IBM PC console running Venix,
20384 cols#80, it#8, lines#25,
20385 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20386 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
20387 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
20388 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
20390 #### Miscellaneous microcomputer consoles
20392 # If you know anything more about any of these, please tell me.
20395 # The MAI Basic Four computer was obsolete at the end of the 1980s.
20396 # It may be used as a terminal by putting it in "line" mode as seen on
20397 # one of the status lines.
20398 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
20399 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
20400 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
20401 # used \ED instead.
20402 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
20403 mai|basic4|MAI Basic Four in ansi mode,
20404 am, da, db, mir, msgr,
20405 cols#82, it#8, lines#25,
20406 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
20407 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
20408 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
20409 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
20410 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
20411 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
20412 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
20413 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20414 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
20415 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20416 smir=\E[4h, smso=\E[7m, smul=\E[4m,
20417 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
20418 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
20420 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
20421 # The Basis 108 was a Apple II clone, manufactured by the "Basis
20422 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
20423 # about 1,5 km from where I live, but doesn't build own computers any
20424 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
20425 # equipped with one or two 5.25" disk drives, had a monochrome and colour
20426 # video output for a TV set or a dedicated monitor and several slots for
20427 # Apple II cards. Basis 108 were quite popular at german schools before
20428 # the advent of the IBM PC. They run, for example, the UCSD Pascal
20429 # development system (which I used even in 1993 to program the steering
20430 # and data recording for our school's experimental solar panel :), Apple DOS
20432 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
20433 basis|BASIS108 computer with terminal translation table active,
20434 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
20435 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
20436 smso=\E(, use=adm3a,
20437 # luna's BMC terminal emulator
20438 luna|luna68k|LUNA68K Bitmap console,
20439 cols#88, lines#46, use=ansi-mini,
20440 megatek|pegasus workstation terminal emulator,
20443 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
20444 # interface (pre-Macintosh by several years) that went nowhere.
20445 xerox820|x820|Xerox 820,
20448 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20449 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
20452 #### Videotex and teletext
20455 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
20456 # \E[?3l 80 columns
20457 # \E[?4l scrolling on
20458 # \E[12h local echo off
20459 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
20460 # \E)0 G1 DEC set (line graphics)
20462 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
20463 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
20464 OTbs, eslok, hs, xenl,
20465 cols#80, it#8, lines#24, wsl#72, xmc#0,
20466 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
20467 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
20468 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20469 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
20470 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20471 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20472 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
20473 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
20474 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
20475 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
20476 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
20477 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
20478 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
20479 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
20480 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20481 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
20482 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
20483 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
20484 u6=\E[%i%d;%dR, u7=\E[6n,
20486 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
20488 minitel1|minitel 1,
20489 am, bw, eslok, hs, hz, .msgr, G0,
20490 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
20491 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
20492 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20493 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
20494 dsl=\037@A\030\n, el=^X,
20495 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
20496 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
20497 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
20498 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
20499 rev=\E], ri=^K, rmso=\E\\,
20500 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
20501 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
20502 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
20504 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
20505 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
20506 %tC%e%p1%'@'%+%c%;,
20507 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
20508 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
20509 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
20510 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
20511 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
20512 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
20514 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
20515 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
20516 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
20517 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
20518 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
20519 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
20520 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
20521 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
20522 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
20523 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
20524 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
20525 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
20526 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
20528 minitel1b|minitel 1-bistandard (in 40cols mode),
20530 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
20531 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
20532 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
20533 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
20534 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
20535 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
20536 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
20537 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
20538 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
20539 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
20540 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
20541 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
20542 rmir=\E[4l, smir=\E[4h,
20543 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
20544 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
20545 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
20546 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
20548 # rmkx posait des problemes (logout en sortant de vi).
20549 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
20550 am@, bw@, eslok@, hz@, msgr, G0,
20551 colors@, cols#80, it#8, pairs@,
20552 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
20553 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
20554 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
20555 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
20556 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
20557 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
20558 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
20559 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
20560 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
20561 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
20562 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
20564 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
20565 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
20566 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
20567 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
20569 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
20570 smso=\E[7m, smul=\E[4m,
20571 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
20572 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
20573 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
20574 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
20576 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
20577 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
20578 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
20580 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
20582 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
20583 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
20584 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
20585 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
20586 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
20587 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
20588 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
20589 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
20590 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
20591 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
20594 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
20596 bold=\EG, clear=^L\EB,
20597 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
20598 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
20599 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20600 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
20603 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
20606 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
20607 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
20608 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
20609 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
20610 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
20612 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20613 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
20614 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
20615 .u8=\001Cu|\004r, use=minitel1b,
20619 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
20621 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
20622 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
20623 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
20625 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
20626 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
20627 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
20628 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
20630 # Fonctionne par exemple avec Midnight Commander (mc).
20632 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
20634 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
20635 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
20636 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
20638 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20639 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
20640 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
20641 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
20642 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
20643 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
20644 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
20645 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
20646 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
20647 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
20648 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
20649 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
20650 \,+k\,.l\,0\177\,-j,
20653 minitel12-80|minitel 12 (80cols),
20655 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
20657 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
20659 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
20661 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
20662 E0=^O, S0=\E)3\016,
20663 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20664 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
20665 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
20666 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
20667 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
20668 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
20669 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
20670 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
20671 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
20672 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
20673 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
20674 \,\\\,m\,+k\,.l\,0\177\,-j,
20678 # Add these in your ~/.screenrc for inputting some special glyphs like french
20679 # accentuated chars in 40 cols mode:
20681 # bindkey ^YA digraph '`' # Saisi accent grave.
20682 # bindkey ^YB digraph "'" # Saisi accent aigu.
20683 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
20684 # bindkey ^YH digraph '"' # Saisi accent trema.
20686 # bindkey ^Y# stuff \243 # Livre.
20687 # bindkey "^Y\047" stuff \247 # Paragraphe.
20688 # bindkey ^Yj stuff \306 # AE
20689 # bindkey ^Yz stuff \346 # ae
20690 # bindkey ^YKc stuff \347 # c cedille.
20693 screen.minitel1|Screen specific for minitel1,
20695 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
20697 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
20698 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20699 use=xterm+x11mouse, use=screen4,
20701 screen.minitel1b|Screen specific for minitel1b,
20702 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
20703 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
20704 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
20705 use=screen.minitel1,
20707 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
20708 colors@, ncv@, pairs@,
20709 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
20710 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
20711 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
20712 use=screen.minitel1b,
20714 screen.minitel1-nb|Screen specific for minitel1-nb,
20715 colors@, ncv@, pairs@,
20716 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20717 use=screen.minitel1,
20719 screen.minitel1b-nb|Screen specific for minitel1b-nb,
20720 colors@, ncv@, pairs@,
20721 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20722 use=screen.minitel1b,
20724 # From: Alexandre Montaron, 29 Sep 2016
20726 linux-m1|Linux Minitel 1 "like" Couleurs,
20727 am, bw@, ccc, mir, msgr, xenl,
20728 colors#8, it#8, ncv#16, pairs#64,
20729 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
20730 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
20731 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20732 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20733 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20734 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
20735 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20736 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
20737 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
20738 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
20739 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
20741 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
20742 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
20743 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
20744 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
20745 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20746 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20747 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
20748 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20749 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
20750 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
20751 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20752 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
20753 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
20754 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
20755 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
20756 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
20757 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
20758 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
20759 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
20761 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20762 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20763 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20764 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20765 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20766 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20767 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20768 \n\n\n\n\n\n\n\n\n\n,
20770 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
20771 # 2. Native brown color corrected to good yellow color.
20772 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
20773 # 4. Suppressed nonexistent underlined mode (normally as bright).
20774 # 5. ich/ich1 not filled because of non-curses programs.
20776 # 6. Suppressed nonexistent invisible mode.
20777 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
20779 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
20781 colors@, ncv@, pairs@,
20782 acsc@, bold=\E[33m, enacs@, initc@,
20783 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
20784 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
20785 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20786 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
20787 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
20788 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
20789 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20792 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
20794 colors@, ncv@, pairs@,
20795 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20796 uvvwwxxyyzz{{||}}~~,
20797 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
20798 enacs=\E)0, initc@,
20799 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
20800 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
20801 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
20803 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
20805 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
20806 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
20807 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
20808 \E]PFFFFFFF\E[;37m,
20811 # Screen entries counterpart :
20813 screen.linux-m1|Linux m1 specific for screen,
20815 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
20816 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
20817 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
20818 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20819 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20820 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20821 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20822 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20823 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20824 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20825 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20826 \n\n\n\n\n\n\n\n\n\n,
20827 use=xterm+x11mouse, use=screen4,
20829 screen.linux-m1b|Linux m1b specific for screen,
20831 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
20833 screen.linux-m2|Linux m2 specific for screen,
20834 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20835 uvvwwxxyyzz{{||}}~~,
20836 use=screen.linux-m1b,
20840 putty-m1|Putty Minitel 1 "like" Couleurs,
20842 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
20843 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20844 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
20845 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=xterm+sl-twm,
20846 use=ecma+index, use=linux-m1,
20848 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
20850 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
20851 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20852 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
20853 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=xterm+sl-twm,
20854 use=ecma+index, use=linux-m1b,
20856 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
20858 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
20860 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
20861 kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20862 smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
20863 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=xterm+sl-twm,
20864 use=ecma+index, use=linux-m2,
20866 screen.putty-m1|Putty m1 specific for screen,
20867 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
20869 screen.putty-m1b|Putty m1b specific for screen,
20871 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
20873 screen.putty-m2|Putty m2 specific for screen,
20874 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20875 uvvwwxxyyzz{{||}}~~,
20876 use=screen.putty-m1b,
20877 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
20880 # viewdata lacks a true cup capability,
20881 # so I achieved it with home and cud1/cuf1 sequences only !
20882 viewdata|prestel/viewdata terminals,
20885 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
20887 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
20888 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
20889 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
20890 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
20891 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
20892 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
20893 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
20895 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
20896 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
20898 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
20899 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
20900 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
20901 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
20902 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
20903 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
20904 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
20905 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
20906 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
20907 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
20908 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
20909 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
20910 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
20911 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
20912 .ll=^^^K, use=viewdata,
20914 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
20916 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
20918 rmso=\EG, smso=\EB, use=viewdata-o,
20920 ######## OBSOLETE VDT TYPES
20922 # These terminals are *long* dead -- these entries are retained for
20923 # historical interest only.
20925 #### Amtek Business Machines
20928 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
20929 # but these caps were commented out in 8.3; also, removed overridden
20930 # ":do=^J:" -- esr)
20931 abm80|amtek business machines 80,
20934 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
20935 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
20936 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
20938 #### Bell Labs blit terminals
20940 # These were AT&T's official entries. The 5620 FAQ maintained by
20941 # David Breneman <daveb@dgtl.com> has this to say:
20943 # Actually, in the beginning was the Jerq, and the Jerq was white with a
20944 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
20945 # was good. But lo, upon the horizon loomed a mighty management-type person
20946 # (known now only by the initials VP) who said, the mighty Jerq must stay
20947 # alone, and could not go forth into the world. So Locanthi and Pike put the
20948 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
20949 # world. And the Jerq lived the rest of its days in research, but never
20950 # strayed from those paths.
20952 # In all seriousness, the Blit was originally known as the Jerq, but when
20953 # it started to be shown outside of the halls of the Bell Labs Research
20954 # organization, the management powers that be decided that the name could
20955 # not remain. So it was renamed to be Blit. This was in late 1981.
20957 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
20961 blit|jerq|blit running teletype rom,
20963 cols#87, it#8, lines#72,
20964 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20965 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
20966 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
20967 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
20968 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
20969 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
20971 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
20972 cbblit|fixterm|blit running columbus code,
20974 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
20975 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
20976 smul=\EU", use=blit,
20978 oblit|ojerq|first version of blit rom,
20979 am, da, db, eo, mir, ul, xon,
20980 cols#88, it#8, lines#72,
20981 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20982 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
20983 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
20984 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
20987 #### Bolt, Beranek & Newman (bbn)
20989 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
20990 # The parent company, best known as the architects of the Internet, is
20993 # Jeff DelPapa <dp@world.std.com> writes:
20994 # The bitgraph was a large white box that contained a monochrome bitmap
20995 # display, and a 68000 to run it. You could download code and run it on
20996 # the cpu, it had 128kb (I think) of memory. I used one in the late
20997 # 70's, sure beat a vt100. It had one strange feature tho -- it used
20998 # the cpu to bitblt pixels to scroll, it took longer than the refresh
20999 # rate, and looked like a rubber sheet stretching, then snapping
21000 # upwards. It had everything the early mac had, except a floppy drive a
21001 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
21002 # Beranek and Neuman) sold at most a few hundred of them to the real
21003 # world. DOD may have bought more...
21006 # Entries for the BitGraph terminals. The problem
21007 # with scrolling in vi can only be fixed by getting BBN to put
21008 # smarter scroll logic in the terminal or changing vi or padding
21009 # scrolls with about 500 ms delay.
21011 # I always thought the problem was related to the terminal
21012 # counting newlines in its input buffer before scrolling and
21013 # then moving the screen that much. Then vi comes along and
21014 # paints lines in on the bottom line of the screen, so you get
21015 # this big white gap.
21017 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
21018 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21020 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
21021 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21023 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
21026 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
21027 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
21028 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
21029 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
21030 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21031 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
21032 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
21033 sgr0=\E[m, smkx=\E=, smso=\E[7m,
21035 bg1.25rv|bbn bitgraph 1.25 (reverse video),
21036 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
21038 bg1.25nv|bbn bitgraph 1.25 (normal video),
21039 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
21041 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
21042 bg1.25|bbn bitgraph 1.25,
21044 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
21045 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
21046 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
21047 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
21048 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
21049 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
21050 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
21053 #### Bull (bq, dku, vip)
21055 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
21057 #============================================#
21058 # BULL QUESTAR 210 `SDP' terminals emulation #
21059 #============================================#
21061 # Description written by R.K.Saunders (Bull Transac)
21063 # Modifications written by F. Girard (Bull MTS)
21064 # 19-05-87 V02.00.01
21065 # 17-12-87 V02.00.02
21066 # 15-09-89 V02.00.05
21068 # Typical technical selections F1 (modes SDP/ROLL):
21069 # -------------------------------------------------------
21070 # | 01 02 03 04 05 06 07 08 09 10 |
21071 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
21073 # | 11 12 13 14 15 16 17 18 19 20 |
21074 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
21076 # | 21 22 23 24 25 26 27 28 29 30 |
21077 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
21079 # | 31 32 33 34 35 36 37 38 39 40 |
21080 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
21081 # -------------------------------------------------------
21082 # Typical firmware identification F5 "etat 6":
21083 # P287.02.04b (AZERTY)
21084 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
21085 # P298.03.03 (monochrome) or P374.03.02 (colour)
21087 # SM SDP mode (VIP command): ^[[?=h
21088 # RIS (erases screen): ^[c
21089 # DMI disable keyboard: ^[`
21090 # SM double rendition mode: ^[[?>h
21091 # RM solicited status mode: ^[[5l
21092 # RM character mode: ^[[>l
21093 # RM echoplex mode: ^[[12l
21094 # RM column tab mode: ^[[18l
21095 # RM forbid SS2 keyboard mode: ^[[?<l
21096 # SM scroll mode: ^[[=h
21097 # FCF enable XON/XOFF: ^[P1s^[\
21098 # MTL select end msg character: ^[[^Wp
21099 # EMI enable keyboard: ^[b
21100 # RIS retour etat initial: ^[c
21101 # enable FC keypad: ^[[?<h,
21102 # MPW map status line window: ^[PY99:98^[\
21103 # SCP select status line: ^[[0;98v
21104 # ED erase entire partition: ^[[2J
21105 # SCP select main partition: ^[[v
21106 # SM character insertion mode: ^[[4h
21107 # RM character replacement mode: ^[[4l
21108 # COO cursor on: ^[[r
21109 # COO cursor off: ^[[1r
21110 # SGR dim (turquoise) rev attr: ^[[2;7m
21111 # SGR Data normal attr: ^[[m
21112 # SO Line-graphic mode ON: ^N
21113 # SI Line-graphic mode OFF: ^O
21114 # MC start routing to printer: ^[[5i
21115 # MC stop routing to printer: ^M^[[4i
21118 # This entry covers the following terminals:
21119 # dku7102, tws2102, and tws models 2105 to 2112
21120 tws-generic|dku7102|Bull Questar tws terminals,
21121 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
21122 cols#80, it#8, lines#24, wsl#80,
21123 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
21124 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
21125 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
21126 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
21127 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
21128 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
21129 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
21130 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
21131 il1=\E[L, ind=\n, invis=\E[0;8m,
21132 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
21133 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
21134 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
21135 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
21136 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
21137 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
21138 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
21139 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
21140 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
21141 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
21142 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
21143 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
21144 %p7%t;8%;m%?%p9%t\016%e\017%;,
21145 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
21146 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
21147 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
21148 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
21149 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
21151 tws2103|xdku|BULL Questar tws2103,
21152 ht=^I, use=tws-generic,
21153 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
21154 ht=^I, use=tws2102-sna,
21155 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
21156 clear=\E[2J\E[H, cup@, dl@, dl1@,
21157 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
21158 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
21160 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
21161 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
21162 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
21163 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
21164 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
21166 #=========================================================#
21167 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
21168 #=========================================================#
21170 # Description written by J. Staerck (BULL SA)
21171 # Copyright (c) 1989 BULL SA
21172 #---------------------------------------------------------------------------
21173 # This entry is used for terminals with vt320 emulation mode
21174 # and following set-up :
21175 # 8 bit ISO Latin Character Set (ISO 8859-1),
21176 # 7 bit Control Characters,
21177 # 80 columns screen.
21178 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
21179 # They are used in string capabilities with vt220-320 emulation mode.
21180 # In the following DEC definitions, two kinds of terminfo databases are
21182 # 1. the first with Command Sequence Introducer starting with escape
21183 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
21184 # 2. the second with Command Sequence Introducer starting with escape
21185 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
21186 # Soft Terminal Reset esc [ ! p
21187 # RIS (erases screen): esc c
21188 # DECKPNM numeric keypad mode: esc >
21189 # DECKPAM applic. keypad mode: esc =
21190 # DECSTBM Scrolling region: esc [ r
21191 # SCS select G0 = US: esc ( B
21192 # SCS select G1 = line-graphic: esc ) 0
21193 # Select 7-bit C1 controls: esc sp F
21194 # Select 8-bit C1 controls: esc sp G
21195 # Select cursor home: esc [ H
21196 # Select erase screen: esc [ J
21197 # SM KAM lock keyboard: esc [ 2 h
21198 # RM KAM unlock keyboard: esc [ 2 l
21199 # SM SRM local echo off: esc [ 1 2 h
21200 # RM SRM local echo on: esc [ 1 2 l
21201 # SM LNM New line : esc [ 2 0 h
21202 # RM LNM return = CR only: esc [ 2 0 l
21203 # SM DECCKM cursor keys mode: esc [ ? 1 h
21204 # RM DECCKM appli. keys mode: esc [ ? 1 l
21205 # SM DECANM ANSI mode on: esc [ ? 2 h
21206 # RM DECANM ANSI mode off: esc [ ? 2 l
21207 # SM DECCOLM 132-column screen: esc [ ? 3 h
21208 # RM DECCOLM 80-column screen: esc [ ? 3 l
21209 # SM DECSCLM Smooth scroll: esc [ ? 4 h
21210 # RM DECSCLM Jump scroll: esc [ ? 4 l
21211 # SM DECSCNM screen light backgr. esc [ ? 5 h
21212 # RM DECSCNM screen dark backgr. esc [ ? 5 l
21213 # SM DECOM move within margins: esc [ ? 6 h
21214 # RM DECOM move outside margins: esc [ ? 6 l
21215 # SM DECAWM auto right margin: esc [ ? 7 h
21216 # RM DECAWM auto right margin: esc [ ? 7 l
21217 # SM DECARM auto repeat: esc [ ? 8 h
21218 # RM DECARM auto repeat: esc [ ? 8 l
21219 # DECSASD Select active main: esc [ 0 $ }
21220 # DECSASD Select active status: esc [ 1 $ }
21221 # DECSSDT Select status none: esc [ 0 $ ~
21222 # DECSSDT Select status indic.: esc [ 1 $ ~
21223 # DECSSDT Select status host-wr: esc [ 2 $ ~
21224 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
21225 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
21226 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
21227 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
21228 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
21229 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
21230 # SM DECKBUM clavier informatique esc [ ? 6 8 h
21231 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
21232 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
21233 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
21234 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
21235 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
21236 # Char. and Line attributes: esc [ Ps ... Ps m
21237 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21238 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21241 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
21242 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
21243 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
21244 cols#80, it#8, lines#24, vt#3, wsl#80,
21245 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21246 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21247 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
21248 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
21249 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21250 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21251 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
21252 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
21253 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
21254 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
21255 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
21256 is1=\E[63;1"p\E[2h,
21257 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21259 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
21260 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
21261 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
21262 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
21263 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
21264 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
21265 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
21266 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
21267 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
21268 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
21269 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
21270 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
21272 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
21273 %;m%?%p9%t\E(0%e\E(B%;,
21274 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
21275 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
21276 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
21277 bq300-rv|Bull vt320 reverse 80 columns,
21278 flash=\E[?5l$<50>\E[?5h,
21279 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21282 bq300-w|Bull vt320 132 columns,
21284 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21286 rs2=\E[?3h, use=bq300,
21287 bq300-w-rv|Bull vt320 reverse mode 132 columns,
21289 flash=\E[?5l$<50>\E[?5h,
21290 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21292 rs2=\E[?3h, use=bq300,
21294 # This entry is used for terminals with vt320 emulation mode
21295 # and following set-up :
21296 # 8 bit ISO Latin Character Set (ISO 8859-1),
21297 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
21298 # 80 columns screen.
21299 # Soft Terminal Reset csi ! p
21300 # RIS (erases screen): esc c
21301 # DECKPNM numeric keypad mode: esc >
21302 # DECKPAM applic. keypad mode: esc =
21303 # DECSTBM Scrolling region: esc [ r
21304 # SCS select G0 = US: esc ( B
21305 # SCS select G1 = line-graphic: esc ) 0
21306 # Select 7-bit C1 controls: esc sp F
21307 # Select 8-bit C1 controls: esc sp G
21308 # Select cursor home: csi H
21309 # Select erase screen: csi J
21310 # SM KAM lock keyboard: csi 2 h
21311 # RM KAM unlock keyboard: csi 2 l
21312 # SM SRM local echo off: csi 1 2 h
21313 # RM SRM local echo on: csi 1 2 l
21314 # SM LNM New line : csi 2 0 h
21315 # RM LNM return = CR only: csi 2 0 l
21316 # SM DECCKM cursor keys mode: csi ? 1 h
21317 # RM DECCKM appli. keys mode: csi ? 1 l
21318 # SM DECANM ANSI mode on: csi ? 2 h
21319 # RM DECANM ANSI mode off: csi ? 2 l
21320 # SM DECCOLM 132-column screen: csi ? 3 h
21321 # RM DECCOLM 80-column screen: csi ? 3 l
21322 # SM DECSCLM Smooth scroll: csi ? 4 h
21323 # RM DECSCLM Jump scroll: csi ? 4 l
21324 # SM DECSCNM screen light backgr. csi ? 5 h
21325 # RM DECSCNM screen dark backgr. csi ? 5 l
21326 # SM DECOM move within margins: csi ? 6 h
21327 # RM DECOM move outside margins: csi ? 6 l
21328 # SM DECAWM auto right margin: csi ? 7 h
21329 # RM DECAWM auto right margin: csi ? 7 l
21330 # SM DECARM auto repeat: csi ? 8 h
21331 # RM DECARM auto repeat: csi ? 8 l
21332 # DECSASD Select active main: csi 0 $ }
21333 # DECSASD Select active status: csi 1 $ }
21334 # DECSSDT Select status none: csi 0 $ ~
21335 # DECSSDT Select status indic.: csi 1 $ ~
21336 # DECSSDT Select status host-wr: csi 2 $ ~
21337 # SM DECTCEM Visible cursor: csi ? 2 5 h
21338 # RM DECTCEM Invisible cursor: csi ? 2 5 l
21339 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
21340 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
21341 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
21342 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
21343 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
21344 # Char. and Line attributes: csi Ps ... Ps m
21345 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21346 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21347 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
21348 bq300-8|Bull vt320 full 8 bits 80 columns,
21349 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
21350 cols#80, it#8, lines#24, vt#3, wsl#80,
21351 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21352 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
21353 clear=\233H\233J, cnorm=\233?25h, cr=\r,
21354 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
21355 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
21356 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
21357 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
21358 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
21359 el=\233K, el1=\2331K, enacs=\E(B\E)0,
21360 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
21361 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
21362 ind=\ED, is1=\E[63;2"p\E[2h,
21363 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21365 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
21366 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
21367 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
21368 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
21369 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
21370 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
21371 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
21372 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
21373 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
21374 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
21375 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
21376 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
21377 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
21378 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
21379 s0ds=\E(B, s1ds=\E(0, sc=\E7,
21380 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
21381 1%;m%?%p9%t\E(0%e\E(B%;,
21382 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
21383 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
21384 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
21385 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
21386 flash=\233?5l$<50>\233?5h,
21387 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21390 bq300-8w|Bull vt320 8-bit 132 columns,
21392 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21394 rs2=\233?3h, use=bq300-8,
21395 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
21397 flash=\233?5l$<50>\233?5h,
21398 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21400 rs2=\233?3h, use=bq300-8,
21402 # This entry is used for terminals with vt320 emulation mode
21403 # a 102 keys keyboard (PC scancode !) and following set-up :
21404 # 8 bit ISO Latin Character Set (ISO 8859-1),
21405 # 7 bit Control Characters,
21406 # 80 columns screen.
21407 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
21408 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
21409 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
21410 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
21411 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
21412 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
21413 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
21414 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
21415 flash=\E[?5l$<50>\E[?5h,
21416 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21419 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
21421 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21423 rs2=\E[?3h, use=bq300-pc,
21424 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
21426 flash=\E[?5l$<50>\E[?5h,
21427 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21429 rs2=\E[?3h, use=bq300-pc,
21430 # 8 bit ISO Latin Character Set (ISO 8859-1),
21431 # 8 bit Control Characters,
21432 # 80 columns screen.
21433 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
21434 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
21435 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
21436 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
21437 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21438 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
21439 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
21440 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
21441 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
21442 flash=\E[?5l$<50>\E[?5h,
21443 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21446 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
21448 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21450 rs2=\E[?3h, use=bq300-8-pc,
21451 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
21453 flash=\E[?5l$<50>\E[?5h,
21454 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21456 rs2=\E[?3h, use=bq300-8-pc,
21458 #======================================================#
21459 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
21460 #======================================================#
21462 # normal mode, 8 bits, 80 columns terminal.
21464 # RIS reset initial state: ^[c
21465 # BLE bell enable ^[h
21466 # BLD bell disable ^[g
21467 # CAMS char. attr. mode set ^[[D
21468 # CAMR char. attr. mode reset ^[[G
21470 # KBU keyboard unlock (set) ^[[W
21471 # KBL keyboard lock (reset) ^[[X
21472 # CM character mode (async.) ^[k
21473 # NEP non echoplex mode (by host) ^[l
21474 # EP echoplex mode (by host) ^[m
21475 # IM insert mode set ^[[I
21476 # IM insert mode reset ^[[J
21477 # RMS roll mode set ^[r
21478 # RMR roll mode reset ^[q
21479 # SM78 set mode vip7800 ^[[1q
21480 # SD scroll up (72 lines) ^[[0s
21481 # SD scroll down (72 lines) ^[[1s
21482 # RBM block mode reset ^[[E
21483 # SLS status line set ^[w
21484 # SLR status line reset ^[v
21485 # SLL status line lock ^[O
21486 # LGS Line-graphic mode set ^[G
21487 # LGR Line-graphic mode reset ^[F
21488 # TBC tab clear (at cursor pos.) ^[[g
21489 # TBI tab initialize ^[[N
21490 # TBS tab set (at cursor pos.) ^[p
21491 # PDS print data space ^[[0p
21492 # PHD print host data ^[[3p
21493 # PDT print data terminator ^[[<p
21494 # PRES print adapter reset ^[[2p
21495 # SSPR multi-part. reset ^[[<>u
21496 # SSP0 partition 0 set ^[[00u
21497 # SSP1 partition n format 1 ^[[PnPnSTRINGu
21498 # SSP2 partition n format 2 ^[[PnPnSTRINGu
21499 # SSP3 partition n format 3 ^[[PnPnu
21500 # ATR attribute (visual)
21503 # hide (blank) : ^[sH
21505 # inverse video : ^[sI
21510 # This covers the vip7800 and BQ3155-vip7800
21511 vip|Bull Questar 3155-7800,
21512 am, eslok, hs, km, mc5i, msgr, xenl, xon,
21513 cols#80, it#8, lines#24, vt#3, wsl#80,
21514 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
21515 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21516 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
21517 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
21518 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
21519 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
21520 is2=\E[00u\E[<>001001024080024080u\E[01u,
21521 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
21522 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
21523 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
21524 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
21525 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
21526 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
21527 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
21528 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
21529 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
21530 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
21531 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
21532 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
21533 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
21534 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
21535 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
21536 smul=\Es_, tbc=\E[N, tsl=\Ew,
21537 # normal screen, 8 bits, 132 columns terminal.
21538 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
21540 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
21541 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
21543 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
21544 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
21545 cols#132, lines#72, wsl#132,
21546 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
21551 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
21552 # that is smaller than the screen, and puts up a warning message
21553 # outside the window. Te erases the warning message, puts the
21554 # window back to be the whole screen, and puts the cursor at just
21555 # below the small window. I defined <cnorm> and <civis> to really turn
21556 # the cursor on and off, but I have taken this out since I don't
21557 # like the cursor being turned off when vi exits.
21558 cg7900|chromatics|chromatics 7900,
21561 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
21562 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
21563 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
21564 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
21566 rmso=\001C1\,\001c2\,,
21567 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
21568 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
21569 \001W0\,0\,79\,39\,,
21570 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
21572 #### Computer Automation
21575 ca22851|computer automation 22851,
21578 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
21579 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
21580 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
21585 # This entry has correct padding and the undocumented "ri" capability
21586 cyb83|xl83|cybernex xl-83,
21589 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21590 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
21591 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
21592 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
21593 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
21594 cyb110|mdl110|cybernex mdl-110,
21597 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
21598 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
21599 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
21600 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
21601 ht=\011$<43>, ich1=\016A\035$<3.5>,
21602 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
21606 # Datapoint is gone. They used to be headquartered in Texas.
21607 # They created ARCnet, an Ethernet competitor that flourished for a while
21608 # in the early 1980s before 3COM got wise and cut its prices. The service
21609 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
21612 dp3360|datapoint|datapoint 3360,
21615 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
21616 ed=^_, el=^^, home=^], ind=\n,
21618 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
21619 # The Datapoint 8242 Workstation was sold at least between 1985
21620 # and 1989. To make the terminal work with this entry, press
21621 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
21622 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
21623 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
21624 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
21625 # fact unusable because the strings sent by the terminal conflict
21626 # with other keys).
21627 # The terminal is capable of displaying "box draw" characters.
21628 # For each graphic character you must send 2 ESC's (\E\E) followed
21629 # by a control character as follows:
21630 # character meaning
21631 # ========= =======
21634 # ctrl-G bottom tee
21637 # ctrl-J top left corner
21638 # ctrl-K top right corner
21639 # ctrl-L bottom left corner
21640 # ctrl-M bottom right corner
21641 # ctrl-N horizontal line
21642 # ctrl-O vertical line
21643 # Unfortunately this cannot be fitted into the termcap/terminfo
21644 # description scheme.
21645 dp8242|datapoint 8242,
21648 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
21649 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
21650 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
21651 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21652 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
21653 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
21654 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
21655 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
21656 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21657 smso=\E^E, smul=\E^F,
21658 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
21661 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
21663 # These entries are DEC's official terminfos for its older terminals.
21664 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
21665 # Engineering for more information. Updated terminfos and termcaps
21666 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
21672 bel=^G, cr=\r, cub1=^H, cud1=\n,
21676 bel=^G, cr=\r, cub1=^H, cud1=\n,
21680 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21681 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
21685 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21686 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21687 el=\EK, ht=^I, ind=\n, ri=\EI,
21688 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
21689 vt61|vt-61|vt61.5|dec vt61,
21691 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
21692 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
21693 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
21694 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21697 # The gigi does standout with red!
21698 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
21699 gigi|vk100|dec gigi graphics terminal,
21702 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
21703 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21704 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
21705 el=\E[K, ht=^I, ind=\n,
21706 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
21707 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
21708 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
21709 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21710 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
21713 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
21714 # a PC differentiated from the IBM clones. It was a total, ludicrous,
21715 # grossly-overpriced failure (among other things, DEC's OS didn't include
21716 # a format program, so you had to buy pre-formatted floppies from DEC at
21717 # a hefty premium!).
21718 pro350|decpro|dec pro console,
21720 cols#80, it#8, lines#24,
21721 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21722 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
21723 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21724 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21725 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
21726 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
21727 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
21732 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
21733 dw2|decwriter|dw|decwriter II,
21736 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
21737 # \E(B Use U.S. character set (otherwise # => british pound !)
21738 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
21739 # \E[w 10 char/in pitch
21740 # \E[1;132 full width horizontal margins
21741 # \E[2g clear all tab stops
21743 # \E[66t 66 lines/page (for \f)
21744 # \E[1;66r full vertical page can be printed
21745 # \E[4g clear vertical tab stops
21746 # \E> disable alternate keypad mode (so it transmits numbers!)
21747 # \E[%i%p1%du set tab stop at column %d (origin == 1)
21748 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
21751 # The dw3 does standout with wide characters.
21753 dw3|la120|decwriter III,
21756 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
21757 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
21758 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
21760 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
21764 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
21765 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
21767 # These aren't official
21768 ln03|dec ln03 laser printer,
21771 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
21772 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
21774 ln03-w|dec ln03 laser printer 132 cols,
21776 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
21777 kcud1=\n, nel=\r\n, use=ln03,
21779 #### Delta Data (dd)
21782 # Untested. The cup sequence is hairy enough that it probably needs work.
21783 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
21784 # There are BSD-derived termcap entries floating around for this puppy
21785 # that are *certainly* wrong.
21786 delta|dd5000|delta data 5000,
21789 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
21790 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
21792 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
21794 #### Digital Data Research (ddr)
21797 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
21798 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
21800 cols#80, it#8, lines#24, vt#3,
21801 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
21802 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
21803 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
21804 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
21805 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
21806 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
21807 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
21808 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
21809 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
21810 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
21811 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
21814 #### Evans & Sutherland
21817 # Jon Leech <leech@cs.unc.edu> tells us:
21818 # The ps300 was the Evans & Sutherland Picture System 300, a high
21819 # performance 3D vector graphics system with a bunch of specialized hardware.
21820 # Approximate date of release was 1982 (early 80s, anyway), and it had several
21821 # evolutions including (limited) color versions such as the PS330C. PS300s
21822 # were effectively obsolete by the late 80s, replaced by raster graphics
21823 # systems, although specialized applications like molecular modeling
21824 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
21825 # are out of production, though of course E&S is very much alive (in 1996).
21826 # (ps300: changed ":pt@:" to "it@" -- esr)
21828 ps300|Picture System 300,
21831 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
21833 #### General Electric (ge)
21836 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
21839 bel=^G, cr=\r, cud1=\n, ind=\n,
21841 #### Heathkit/Zenith
21844 # Here is a description of the H19 DIP switches:
21847 # 0-3 = baud rate as follows:
21852 # 0 1 0 1 1200 baud
21853 # 1 0 0 0 2400 baud
21854 # 1 0 1 0 4800 baud
21855 # 1 1 0 0 9600 baud
21856 # 1 1 0 1 19.2K baud
21858 # 4 = parity (0 = no parity)
21859 # 5 = even parity (0 = odd parity)
21860 # 6 = stick parity (0 = normal parity)
21861 # 7 = full duplex (0 = half duplex)
21864 # 0 = block cursor (0 = underscore cursor)
21865 # 1 = no key click (0 = keyclick)
21866 # 2 = wrap at end of line (0 = no wrap)
21867 # 3 = auto LF on CR (0 = no LF on CR)
21868 # 4 = auto CR on LF (0 = no CR on LF)
21869 # 5 = ANSI mode (0 = VT52 mode)
21870 # 6 = keypad shifted (0 = keypad unshifted)
21871 # 7 = 50Hz refresh (1 = 60Hz refresh)
21873 # Factory Default settings are as follows:
21875 # S401 1 0 0 0 1 1 0 0
21876 # S402 0 0 0 0 0 0 0 0
21877 # (h19: I added <rmam>/<smam> based on the init string;
21878 # also added empty <acsc> to suppress a tic warning -- esr)
21879 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
21880 OTbs, am, mir, msgr,
21881 cols#80, it#8, lines#24,
21882 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
21883 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
21884 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
21885 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
21886 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
21887 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
21888 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
21889 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
21890 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
21891 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
21892 h19-bs|heathkit w/keypad shifted,
21893 rmkx=\Eu, smkx=\Et, use=h19-b,
21894 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
21895 rmkx=\Eu, smkx=\Et, use=h19-u,
21896 # (h19: merged in <ip> from BSDI hp19-e entry>;
21897 # also added empty <acsc> to suppress a tic warning --esr)
21898 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
21899 # Tim tells us that:
21900 # I have an old Zenith-19 terminal at home that still gets a lot of use.
21901 # This terminal suffers from the same famous insert-mode padding lossage
21902 # that has been acknowledged for the Z29 terminal. Emacs is nearly
21903 # unusable on this box, since even a half-scroll up or down the window
21904 # causes flaming terminal death.
21906 # On the Z19, the only way I have found around this problem is to remove
21907 # the :al: and :dl: entries entirely. No amount of extra padding will
21908 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
21909 # makes Emacs a little slower, but it remains in the land of the living.
21911 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
21912 OTbs, am, eslok, hs, mir, msgr,
21913 cols#80, it#8, lines#24,
21914 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
21915 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21916 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
21917 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
21918 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21919 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
21920 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
21921 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21922 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
21923 h19-u|heathkit with underscore cursor,
21924 cnorm@, cvvis@, use=h19-b,
21925 h19-g|h19g|heathkit w/block cursor,
21926 cnorm=\Ex4, cvvis@, use=h19-b,
21927 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
21929 dl1=\EM, il1=\EL, use=h19,
21931 # The major problem with the Z29 is that it requires more padding than the Z19.
21933 # The problem with declaring an H19 to be synonymous with a Z29 is that
21934 # it needs more padding. It especially loses if a program attempts
21935 # to put the Z29 into insert mode and insert text at 9600 baud. It
21936 # even loses worse if the program attempts to insert tabs at 9600
21937 # baud. Adding padding to text that is inserted loses because in
21938 # order to make the Z29 not die, one must add so much padding that
21939 # whenever the program tries to use insert mode, the effective
21940 # rate is about 110 baud.
21942 # What program would want to put the terminal into insert mode
21943 # and shove stuff at it at 9600 baud you ask?
21945 # Emacs. Emacs seems to want to do the mathematically optimal
21946 # thing in doing a redisplay rather than the practical thing.
21947 # When it is about to output a line on top of a line that is
21948 # already on the screen, instead of just killing to the end of
21949 # the line and outputting the new line, it compares the old line
21950 # and the new line and if there are any similarities, it
21951 # constructs the new line by deleting the text on the old line
21952 # on the terminal that is already there and then inserting new
21953 # text into the line to transform it into the new line that is
21954 # to be displayed. The Z29 does not react kindly to this.
21956 # But don't cry for too long.... There is a solution. You can make
21957 # a termcap entry for the Z29 that says the Z29 has no insert mode.
21958 # Then Emacs cannot use it. "Oh, no, but now inserting into a
21959 # line will be really slow", you say. Well there is a sort of a
21960 # solution to that too. There is an insert character option on
21961 # the Z29 that will insert one character. Unfortunately, it
21962 # involves putting the terminal into ansi mode, inserting the
21963 # character, and changing it back to H19 mode. All this takes 12
21964 # characters. Pretty expensive to insert one character, but it
21965 # works. Either Emacs doesn't try to use its inserting hack when
21966 # it's only given an insert character ability or the Z29 doesn't
21967 # require padding with this (the former is probably more likely,
21968 # but I haven't checked it out).
21969 # (z29: added empty <acsc> to suppress a tic warning, merged in
21970 # status line capabilities from BRL entry --esr)
21971 z29|zenith29|z29b|zenith z29b,
21972 OTbs, OTpt, am, eslok, hs, mir, msgr,
21973 OTkn#10, cols#80, lines#24,
21974 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
21975 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21976 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
21977 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
21978 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
21979 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
21980 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21981 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
21982 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
21983 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
21984 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
21985 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21986 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
21987 # the world is stable. <rs1> causes the terminal to be reset to the state
21988 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
21989 # cursor, bc -> block cursor.
21990 # From: Mike Meyers
21991 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
21992 # looks vt100-compatible -- esr)
21993 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
21994 OTbs, OTpt, am, eslok, hs, mir, msgr,
21995 OTkn#10, cols#80, it#8, lines#24,
21996 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
21997 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21998 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21999 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22000 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22001 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
22002 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
22003 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
22004 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
22005 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
22006 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
22007 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
22008 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
22009 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
22011 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
22012 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
22013 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
22014 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
22017 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
22018 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
22021 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
22022 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
22025 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
22026 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
22027 am, eslok, hs, mc5i, mir, msgr, xon,
22029 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
22030 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
22031 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
22032 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22033 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
22034 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
22035 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
22036 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
22037 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
22038 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
22039 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
22040 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
22041 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
22042 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
22043 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
22044 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
22045 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
22046 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22047 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
22049 # From: Brad Brahms <Brahms@USC-ECLC>
22050 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
22051 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
22052 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
22053 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
22054 OTbs, OTpt, mir, msgr,
22055 OTkn#10, cols#80, it#8, lines#24,
22056 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
22057 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
22058 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
22059 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
22060 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
22061 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
22062 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
22063 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
22064 smir=\E@, smso=\Ep,
22065 p19|h19-b with il1/dl1,
22066 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
22067 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
22068 # (ztx: removed duplicate :sr: -- esr)
22069 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
22070 OTbs, am, eslok, hs,
22071 cols#80, it#8, lines#24,
22072 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
22073 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
22074 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
22075 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
22076 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
22077 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
22078 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
22079 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
22081 #### IMS International (ims)
22083 # There was a company called IMS International located in Carson City,
22084 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
22085 # bus/Z80 hardware and a line of terminals called Ultimas.
22088 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
22089 ims950-b|bare ims950 no init string,
22091 # (ims950: removed obsolete ":ko@:" -- esr)
22092 ims950|ims televideo 950 emulation,
22094 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22095 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
22096 # (ims950-rv: removed obsolete ":ko@:" -- esr)
22097 ims950-rv|ims tvi950 rev video,
22099 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
22100 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
22101 ims-ansi|ultima2|ultimaII|IMS Ultima II,
22103 cols#80, it#8, lines#24,
22104 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
22105 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
22106 ht=^I, if=/usr/share/tabset/vt100,
22107 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
22108 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
22109 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
22112 #### Intertec Data Systems
22114 # I think this company is long dead as of 1995. They made an early CP/M
22115 # micro called the "Intertec Superbrain" that was moderately popular,
22116 # then sank out of sight.
22119 superbrain|intertec superbrain,
22122 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
22123 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
22124 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
22125 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
22126 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
22127 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
22128 # and the reverse is actually true. Try it. -- esr)
22129 intertube|intertec|Intertec InterTube,
22132 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
22133 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
22134 ind=\n, rmso=\E0@, smso=\E0P,
22135 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
22136 # are typing and a command comes in, the keystrokes you type get interspersed
22137 # with the command and it messes up
22138 intertube2|intertec data systems intertube 2,
22140 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
22141 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
22142 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
22144 #### Ithaca Intersystems
22146 # This company made S100-bus personal computers long ago in the pre-IBM-PC
22147 # past. They used to be reachable at:
22149 # Ithaca Intersystems
22150 # 1650 Hanshaw Road
22151 # Ithaca, New York 14850
22153 # However, the outfit went bankrupt years ago.
22156 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
22157 # These entries were written (originally in termcap syntax) by Brian Yandell
22158 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
22159 # University of Wisconsin.
22161 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
22162 # removed <if=/usr/share/tabset/init.graphos> and
22163 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
22164 graphos|graphos III,
22166 cols#80, it#8, lines#24,
22167 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
22168 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
22169 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22170 cuu=\E[%p1%dA, cuu1=\E[A,
22171 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
22172 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
22173 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22174 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
22175 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
22176 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
22177 smir=\E[4h, smso=\E[7m,
22178 graphos-30|graphos III with 30 lines,
22180 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
22184 # These people used to be reachable at:
22187 # 1393 Main Street,
22188 # Waltham, MA 02154
22189 # Vox: (617)-890-5796.
22191 # However, if you call that number today you'll get an insurance company.
22192 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
22193 # 26 Feb 1997 that says:
22195 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
22196 # for ~7 years. Modgraph still in business. Products are rugged laptop and
22197 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
22198 # panel-mount etc). I can be emailed at sonfour@aol.com
22200 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
22201 # dated 1984. According to the manual, it featured Tek 4010/4014
22202 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
22205 modgraph|mod24|modgraph terminal emulating vt100,
22208 cvvis=\E\^9;0s\E\^7;1s,
22209 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
22210 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
22211 \E\^11;81s\E\^11;89s,
22212 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
22213 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
22214 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
22216 cols#80, it#8, lines#24,
22217 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
22218 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
22219 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
22220 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
22221 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
22222 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
22223 1s\E\^9;1s\E\^27;1,
22226 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
22227 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
22228 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
22229 # mark and using delete-to-killbuffer work correctly. However, we would
22230 # like normal mode of operation to be using a Modgraph with 48 line setting.
22231 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
22232 # the setting mark and delete-to-killbuffer results in the deletion of only
22233 # the line the mark is set on.
22234 # We've discovered that the delete-to-killbuffer works correctly
22235 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
22236 # the first line disappears but a ctrl-l shows that it did work
22238 modgraph48|mod|Modgraph w/48 lines,
22239 OTbs, OTpt, am, xenl,
22240 cols#80, it#8, lines#48, vt#3,
22241 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
22242 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
22243 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22244 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
22245 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
22246 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
22247 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
22248 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22249 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
22250 smso=\E[7m, smul=\E[4m,
22252 #### Morrow Designs
22254 # This was George Morrow's company. They started in the late 1970s making
22255 # S100-bus machines. They used to be reachable at:
22258 # 600 McCormick St.
22259 # San Leandro, CA 94577
22261 # but they're long gone now (1995).
22264 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
22265 # Jeff's specimen was dated June 1984.
22266 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
22267 mt70|mt-70|Morrow MD-70; native Morrow mode,
22268 am, mir, msgr, xon,
22269 cols#80, it#8, lines#24,
22270 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
22271 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
22272 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
22273 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
22274 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
22275 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
22276 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
22277 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
22278 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
22279 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
22280 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
22281 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
22282 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
22283 smul=\EG1, tbc=\E0, use=adm+sgr,
22288 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
22290 ex155|Motorola Exorterm 155,
22292 OTkn#5, OTug#1, cols#80, lines#24,
22293 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
22294 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
22295 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
22296 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
22297 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
22301 # This company is still around in 1995, manufacturing point-of-sale systems.
22303 omron|Omron 8025AG,
22306 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
22307 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
22308 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
22312 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
22313 # were competition for things like the Tektronix 4025.
22316 # Ramtek 6221 from BRL, probably by Doug Gwyn
22317 # The following SET-UP modes are assumed for normal operation:
22318 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
22319 # NEWLINE_OFF 80_COLUMNS
22320 # Other SET-UP modes may be set for operator convenience or communication
22321 # requirements; I recommend
22322 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
22323 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
22324 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
22325 # Note that the Control-E key is useless on this brain-damaged terminal. No
22326 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
22327 rt6221|Ramtek 6221 80x24,
22328 OTbs, OTpt, msgr, xon,
22329 OTkn#4, cols#80, it#8, lines#24, vt#3,
22330 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
22331 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
22332 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
22333 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
22334 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
22335 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
22336 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22337 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
22338 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
22339 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
22340 rmso=\E[m, rmul=\E[m,
22341 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
22342 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
22344 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
22345 smul=\E[4m, tbc=\E[3g,
22346 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
22347 rt6221-w|Ramtek 6221 160x48,
22348 cols#160, lines#48,
22349 ll=\E[48;1H, use=rt6221,
22354 # RCA VP3301 or VP3501
22355 rca|rca vp3301/vp3501,
22358 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22359 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
22365 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
22366 # The following SET-UP modes are assumed for normal operation:
22367 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
22368 # ONLINE ANSI CURSOR_VISIBLE
22369 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
22370 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
22371 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
22372 # For use with graphics software, all graphics modes should be set to factory
22373 # default. Other SET-UP modes may be set for operator convenience or
22374 # communication requirements. No delays are specified; use "stty ixon -ixany"
22375 # to enable DC3/DC1 flow control!
22376 # I commented out the scrolling capabilities since they are too slow.
22377 hirez100|Selanar HiREZ-100,
22378 OTbs, OTpt, mir, msgr, xon,
22379 OTkn#4, cols#80, it#8, lines#48, vt#3,
22380 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
22381 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22382 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22383 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
22384 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22385 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
22386 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
22387 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
22388 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
22389 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
22390 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22391 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
22392 9l\E[r\E[m\E(B\017\E)0\E>,
22393 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
22394 smul=\E[4m, tbc=\E[3g,
22395 hirez100-w|Selanar HiREZ-100 in 132-column mode,
22396 cols#132, use=hirez100,
22401 # From University of Wisconsin
22402 vsc|Signetics Vsc Video driver by RMC,
22404 cols#80, it#8, lines#26,
22405 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
22406 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
22407 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
22408 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
22412 # Alan Frisbie <frisbie@flying-disk.com> writes:
22414 # As you may recall, the Soroc logo consisted of their name,
22415 # with the letter "S" superimposed over an odd design. This
22416 # consisted of a circle with a slightly smaller 15 degree (approx.)
22417 # wedge with rounded corners inside it. The color was sort of
22418 # a metallic gold/yellow.
22420 # If I had been more of a beer drinker it might have been obvious
22421 # to me, but it took a clue from their service department to make
22422 # me exclaim, "Of course!" The circular object was the top of
22423 # a beer can (the old removable pop-top style) and "Soroc" was an
22424 # anagram for "Coors".
22426 # I can just imagine the founders of the company sitting around
22427 # one evening, tossing back a few and trying to decide what to
22428 # call their new company and what to use for a logo.
22431 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
22432 soroc120|iq120|soroc|soroc iq120,
22433 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
22434 kcuf1=^L, kcuu1=^K, use=adm3a,
22435 soroc140|iq140|soroc iq140,
22438 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22439 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
22440 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
22441 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
22442 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
22443 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
22444 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
22446 #### Southwest Technical Products
22448 # These guys made an early personal micro called the M6800.
22449 # The ct82 was probably its console terminal.
22452 # (swtp: removed obsolete ":bc=^D:" -- esr)
22453 swtp|ct82|southwest technical products ct82,
22456 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
22457 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
22458 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
22459 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
22460 \017\035\027\022\011,
22461 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
22465 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
22467 # Synertek used to make ICs, various 6502-based single-board process
22468 # control and hobbyist computers, and assorted peripherals including a
22469 # series of small inexpensive terminals (I think they were one of the
22470 # first to have a "terminal-on-a-keyboard", where the terminal itself
22471 # was only slightly larger than the keyboard).
22473 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
22474 # was a 40x24 terminal that could connect to a standard TV through a
22475 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
22476 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
22477 # I have a KTM-2/80 still in working order. The KTM-2s had fully
22478 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
22479 # ROM and 2 ROMs as character generators. They were incredibly simple,
22480 # and I've never had any problems with mine (witness the fact that mine
22481 # was made in 1981 and is still working great... I've blown the video
22482 # output transistor a couple of times, but it's a 2N2222 :-)
22484 # The KTM-3 (which is what is listed in the terminfo file) was their
22485 # attempt at putting a KTM-2 in a box (and some models came with a
22486 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
22487 # control and escape sequences are very different. The KTM-3 was always
22488 # real broken, at least according to the folks I've talked to about it.
22490 # The padding in the entry is probably off--these terminals were very
22491 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
22492 # anyone with any sanity replaced the ROMs with something that provided
22493 # a reasonable subset of VT100 functionality, since the usual ROMs were
22494 # obviously very primitive... oh, you could get an upgraded ROM from
22495 # Synertek for some incredible amount of money, but what hacker with an
22496 # EPROM burner would do that? :)
22498 # Sorry I don't have any contact info; I believe they were located in
22499 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
22500 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
22501 # business these days.
22504 # Tested, seems to work fine with vi.
22505 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
22508 clear=^Z, cub1=^H, cuf1=^L,
22509 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22511 #### Tab Office Products
22513 # TAB Products Co. - Palo Alto, California
22514 # Electronic Office Products,
22515 # 1451 California Avenue 94304
22517 # I think they're out of business.
22520 # The tab 132 uses xon/xoff, so no padding needed.
22521 # <smkx>/<rmkx> have nothing to do with arrow keys.
22522 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
22523 # Seems to be no way to get rid of status line.
22524 # The manual for this puppy was dated June 1981. It claims to be VT52-
22525 # compatible but looks more vt100-like.
22526 tab132|tab|tab132-15|tab 132/15,
22528 OTdN@, cols#80, lines#24, lm#96,
22529 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
22530 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
22531 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
22533 tab132-w|tab132 in wide mode,
22535 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
22536 tab132-rv|tab132 in reverse-video mode,
22537 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
22538 tab132-w-rv|tab132 in reverse-video/wide mode,
22539 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
22544 # Research Incorporated
22545 # 6425 Flying Cloud Drive
22546 # Eden Prairie, MN 55344
22547 # Vox: (612)-941-3300
22549 # The Teleray terminals were all discontinued in 1992-93. RI still services
22550 # and repairs these beasts, but no longer manufactures them. The Teleray
22551 # people believe that all the types listed below are very rare now (1995).
22552 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
22553 # Model 100) that were ANSI-compatible.
22555 # Note two things called "teleray". Reorder should move the common one
22556 # to the front if you have either. A dumb teleray with the cursor stuck
22557 # on the bottom and no obvious model number is probably a 3700.
22560 t3700|dumb teleray 3700,
22563 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
22564 t3800|teleray 3800 series,
22566 cols#80, it#8, lines#24,
22567 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22568 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22569 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
22570 t1061|teleray|teleray 1061,
22571 OTbs, am, km, xhp, xt,
22572 cols#80, it#8, lines#24, xmc#1,
22573 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22574 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22575 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
22576 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
22577 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
22578 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
22579 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
22580 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
22582 t1061f|teleray 1061 with fast PROMs,
22583 dl1=\EM, il1=\EL, ip@, use=t1061,
22584 # "Teleray Arpa Special", officially designated as
22585 # "Teleray Arpa network model 10" with "Special feature 720".
22586 # This is the new (1981) fast microcode updating the older "arpa" proms
22587 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
22588 # converts the keypad to programmable function keys, and has other goodies.
22589 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
22590 # programs handle such lossage properly.
22591 # Note: this is NOT the old termcap's "t1061f with fast proms."
22592 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
22593 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
22594 t10|teleray 10 special,
22596 cols#80, it#8, lines#24, xmc#2,
22597 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
22598 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22599 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
22600 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
22602 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
22603 # back/forth words. Put the function keys (f1-f10) where they can be
22604 # found, and turn off the other magic keys along the top row, except
22605 # for line/local. Do the magic appropriate to make the page shifts work.
22606 # Also toggle ^S/^Q for those of us who use Emacs.
22608 am, da, db, mir, xhp, xt,
22610 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
22611 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
22612 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
22613 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
22614 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
22615 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
22616 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
22617 smso=\E[7m, smul=\E[4m,
22619 #### Texas Instruments (ti)
22622 # The Silent 700 was so called because it was built around a quiet thermal
22623 # printer. It was portable, equipped with an acoustic coupler, and pretty
22624 # neat for its day.
22625 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
22628 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
22630 # Terminal entries for the Texas Instruments 703/707
22631 # hardcopy terminals.
22633 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/
22635 # Model 707 Data Terminal User's Manual
22637 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
22638 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0
22639 # cpi using an escape sequence. There is no 80/132-column capability in
22640 # terminfo (only the more general cpi which allows any value).
22641 ti703|ti707|Texas Instruments Silent 703/707,
22644 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, cuf1=\s, ind=\n,
22645 is2=\EPC\\, nel=\r\n,
22646 ti703-w|ti707-w|Texas Instruments Silent 703/707,
22648 is2=\EPD\\, use=ti703,
22651 # Texas Instruments 916 VDT 7 bit control mode
22653 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
22655 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
22656 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
22657 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22658 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
22659 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
22660 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
22661 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
22662 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
22663 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
22664 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
22665 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
22666 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
22667 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
22668 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
22671 # Texas Instruments 916 VDT 8 bit control mode
22673 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
22674 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
22675 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
22676 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
22677 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22678 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
22679 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
22681 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
22683 ti916-132|Texas Instruments 916 VDT vt220 132 column,
22684 cols#132, use=ti916,
22686 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
22688 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
22689 cols#132, use=ti916-8,
22690 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
22692 cols#80, it#8, lines#24,
22693 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22694 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22695 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22696 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22697 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22698 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22699 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
22700 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
22701 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
22702 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
22703 smul=\E[4m, tbc=\E[3g,
22704 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
22706 cols#80, it#8, lines#24,
22707 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22708 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22709 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22710 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22711 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22712 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22713 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
22714 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
22715 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
22716 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
22717 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22718 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
22719 cols#132, use=ti924,
22720 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
22721 cols#132, use=ti924-8,
22722 ti931|Texas Instruments 931 VDT,
22725 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
22726 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22727 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
22728 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
22729 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22730 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
22731 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
22732 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
22733 sgr0=\E4@, smso=\E4A, smul=\E4D,
22734 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
22735 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
22736 # (ti926-8: I corrected this from the broken SCO entry -- esr)
22737 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
22738 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
22739 ti_ansi|basic entry for ti928,
22740 am, bce, eo, xenl, xon,
22741 colors#8, cols#80, it#8, lines#25, pairs#64,
22742 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
22743 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
22744 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
22745 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
22746 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22747 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
22748 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
22749 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
22750 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
22751 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
22752 smso=\E[7m, smul=\E[4m,
22754 # 928 VDT 7 bit control mode
22756 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
22757 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
22758 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
22759 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
22760 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
22761 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
22763 # 928 VDT 8 bit control mode
22765 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
22766 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
22767 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
22768 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
22769 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
22770 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
22771 kpp=\233T, kprt=\23335~, use=ti_ansi,
22776 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
22777 # had just <smso>=\EG6 which I think means standout was supposed to be
22778 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
22779 # <invis> might work-- esr)
22780 zen30|z30|zentec 30,
22783 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22784 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
22785 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
22786 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
22787 smul@, use=adm+sgr,
22788 # (zen50: this had extension capabilities
22789 # :BS=^U:CL=^V:CR=^B:
22790 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
22791 # which were also in the original entry -- esr)
22792 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
22793 zen50|z50|zentec zephyr,
22795 cols#80, lines#24, xmc#1,
22796 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
22797 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
22798 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
22799 rmul@, smul@, use=adm+sgr,
22801 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
22802 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
22805 blink=\EM", clear=\EH\EJ, cnorm=\EP,
22806 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
22807 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
22808 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
22809 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
22810 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
22811 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
22812 smso=\EM$, smul=\EM0,
22814 ######## OBSOLETE UNIX CONSOLES
22817 #### Apollo consoles
22819 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
22820 # labeled HP700s now.
22823 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
22824 apollo|apollo console,
22827 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
22828 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
22829 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
22830 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
22831 smso=\ES, smul=\EU, vpa=\EO+\s,
22833 # We don't know whether or not the apollo guys replicated DEC's firmware bug
22834 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
22835 # both these capabilities.
22836 apollo_15P|apollo 15 inch display,
22837 rmir@, smir@, use=vt132,
22838 apollo_19L|apollo 19 inch display,
22839 rmir@, smir@, use=vt132,
22840 apollo_color|apollo color display,
22841 rmir@, smir@, use=vt132,
22845 # This actually describes the generic SVr4 display driver for Intel boxes.
22846 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
22847 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
22848 att6386|at386|386at|AT&T WGS 6386 console,
22850 cols#80, it#8, lines#25,
22851 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22852 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
22853 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
22854 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22855 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22856 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
22857 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
22858 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
22859 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
22860 is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B,
22861 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP,
22862 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
22863 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
22864 khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0,
22865 nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
22866 rmso=\E[m, rmul=\E[m, sc=\E7,
22867 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
22868 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
22869 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
22870 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index,
22872 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
22873 pc6300plus|AT&T 6300 plus,
22876 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
22877 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
22878 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
22879 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
22880 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
22881 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
22882 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
22883 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
22884 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22885 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22887 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
22889 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
22890 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
22891 # is broken. All the special key sequences are broken, making it unusable
22892 # with Emacs. The problem stems from the following:
22894 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
22895 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
22896 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
22897 # uses resizable terminal windows, but the bundled terminal program always
22898 # uses an 80x24 window (and doesn't support seem to support a 132-column
22901 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
22902 # library which was a superset of SVr3.5 curses (called tam, for "terminal
22903 # access method".) tam includes support for real, overlapping windows,
22904 # onscreen function key labels, and bitmap graphics. But since the primary
22905 # user interface on the UNIX PC was a GUI program (ua, for "user
22906 # assistant",) and remote administration was considered important for the
22907 # machine, tam also supported VT100-compatible terminals attached to the
22908 # serial port or used across the StarLan network. To simulate the extra keys
22909 # not present on a VT100, users could press ESC and a two-letter sequence,
22910 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
22911 # however, were not the same as those sent by the actual Undo key. The
22912 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
22913 # (If you're interested in adding some of the tam calls to ncurses, btw, I
22914 # have the full documentation and several programs which use tam. It also
22915 # used an extended terminfo format to describe key sequences, special
22916 # highlighting modes, etc.)
22918 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
22919 # there are two sequences for every key-modifier combination (local keyboard
22920 # sequence and remote "VT100" sequence.) But I doubt many people are trying
22921 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
22922 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
22923 # seem to have been built from the manual describing the VT100 sequences.
22924 # This means it doesn't work for a real live UNIX PC.
22926 # FONTS: The UNIX PC also has a strange interpretation of "alternate
22927 # character set". Rather than the VT100 graphics you might expect, it allows
22928 # up to 8 custom fonts to be loaded at any given time. This means that
22929 # programs expecting VT100 graphics will usually be disappointed. For this
22930 # reason I have disabled the smacs/rmacs sequences, but they could easily be
22931 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
22932 # manpage), should you wish to do so:
22934 # SGR10 - Select font 0 - ESC [ 10 m or SO
22935 # SGR11 - Select font 1 - ESC [ 11 m or SI
22936 # SGR12 - Select font 2 - ESC [ 12 m
22938 # SGR17 - Select font 7 - ESC [ 17 m
22940 # Graphics for line drawing are not reliably found at *any* character
22941 # location because the UNIX PC has dynamically reloadable fonts. I use font
22942 # 0 for regular text and font 1 for italics, but this is by no means
22943 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
22945 # MISC: The cursor visible/cursor invisible sequences were swapped in the
22946 # distributed terminfo.
22948 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
22949 # the UNIX PC terminfo entry. The modified version works great with Lynx,
22950 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
22951 # attached by serial cable. In Emacs, even the Undo key works, and many
22952 # applications can now use the F1-F8 keys.
22955 # Terminfo entry for the AT&T Unix PC 7300
22956 # from escape(7) in Unix PC 7300 Manual.
22957 # Somewhat similar to a vt100-am (but different enough
22958 # to redo this from scratch.)
22960 # /***************************************************************
22962 # * FONT LOADING PROGRAM FOR THE UNIX PC
22964 # * This routine loads a font defined in the file ALTFONT
22965 # * into font memory slot #1. Once the font has been loaded,
22966 # * it can be used as an alternative character set.
22968 # * The call to ioctl with the argument WIOCLFONT is the key
22969 # * to this routine. For more information, see window(7) in
22970 # * the PC 7300 documentation.
22971 # ***************************************************************/
22972 # #include <string.h> /* needed for strcpy call */
22973 # #include <sys/window.h> /* needed for ioctl call */
22974 # #define FNSIZE 60 /* font name size */
22975 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
22977 # * The file /usr/lib/wfont/special.8.ft comes with the
22978 # * standard PC software. It defines a graphics character set
22979 # * similar to that of the Teletype 5425 terminal. To view
22980 # * this or other fonts in /usr/lib/wfont, use the command
22981 # * cfont <filename>. For further information on fonts see
22982 # * cfont(1) in the PC 7300 documentation.
22985 # struct altfdata /* structure for alt font data */
22987 # short altf_slot; /* memory slot number */
22988 # char altf_name[FNSIZE]; /* font name (file name) */
22992 # int wd; /* window in which altfont will be */
22993 # struct altfdata altf;
22994 # altf.altf_slot=1;
22995 # strcpy(altf.altf_name,ALTFONT);
22996 # for (wd =1; wd < 12; wd++) {
22997 # ioctl(wd, WIOCLFONT,&altf);
23001 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
23002 # they're confirmed by the man page for the System V display---esr)
23004 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
23006 cols#80, it#8, lines#24,
23007 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
23008 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
23009 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
23010 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
23011 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
23012 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
23013 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
23014 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
23015 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
23016 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
23017 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
23018 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
23019 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
23020 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
23021 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
23022 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
23023 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
23024 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
23025 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
23026 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
23027 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
23028 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
23031 #### Convergent Technology
23033 # Burroughs bought Convergent shortly before it merged with Univac.
23034 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
23035 # from 1991 or earlier).
23038 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
23039 # (aws: removed unknown :dn=^K: -- esr)
23040 aws|Convergent Technologies AWS workstation under UTX and Xenix,
23042 OTug#0, cols#80, lines#28, xmc#0,
23043 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
23044 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
23045 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
23046 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
23047 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
23048 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
23050 awsc|Convergent Technologies AWS workstation under CTOS,
23052 OTug#0, cols#80, lines#24, xmc#0,
23053 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
23054 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
23055 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
23056 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
23062 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
23063 # The digital uVax II's had a graphic display called a qdss. It was
23064 # supposed to be a high performance graphic accelerator, but it was
23065 # late to market and barely appeared before faster dumb frame buffers
23066 # appeared. I have only used this display while running X11. However,
23067 # during bootup, it was in text mode, and probably had a terminal emulator
23068 # within it. And that is what your termcap entry is for. In graphics
23069 # mode the screen size is 1024x864 pixels.
23070 qdss|qdcons|qdss glass tty,
23072 cols#128, lines#57,
23073 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
23074 cup=\E=%p1%c%p2%c, cuu1=^K,
23076 #### Fortune Systems consoles
23078 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
23079 # in their day; I (esr) used one myself for a year or so around 1984.
23080 # They had no graphics, though, and couldn't compete against Suns and
23084 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
23085 # (This had extension capabilities
23086 # :rv=\EH:re=\EI:rg=0:GG=0:\
23087 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
23088 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
23089 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
23090 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
23091 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
23092 # to force both magic cookie glitches off. Once upon a time, I
23093 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
23094 # function keys; thus the "Al" value for HM was certainly an error. I renamed
23095 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
23096 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
23097 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
23098 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
23099 fos|fortune|Fortune system,
23102 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
23103 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
23104 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
23105 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
23106 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
23107 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
23108 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
23109 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
23110 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
23111 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
23112 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
23113 smso=^\H`, smul=^\HP,
23115 #### Masscomp consoles
23117 # Masscomp has gone out of business. Their product line was purchased by
23118 # comany in Georgia (US) called "XS International", parts and service may
23119 # still be available through them.
23122 # (masscomp: ":MT:" changed to ":km:"; -- esr)
23123 masscomp|masscomp workstation console,
23125 cols#80, it#8, lines#24,
23126 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23127 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23128 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
23129 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
23130 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
23131 masscomp1|masscomp large screen version 1,
23132 cols#104, lines#36, use=masscomp,
23133 masscomp2|masscomp large screen version 2,
23134 cols#64, lines#21, use=masscomp,
23139 # OSF/1 1.1 Snapshot 2
23140 pmcons|pmconsole|PMAX console,
23142 cols#128, lines#57,
23143 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
23144 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
23145 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
23147 #### Other consoles
23148 # The following is a version of the ibm-pc entry distributed with PC/IX,
23149 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
23150 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
23151 # (the former is untrue, and the latter failed under UCB/man); standout and
23152 # underline modes have been added. Note: this entry describes the "native"
23153 # capabilities of the PC monochrome display, without ANY emulation; most
23154 # communications packages (but NOT PC/IX connect) do some kind of emulation.
23155 pcix|PC/IX console,
23158 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
23159 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
23160 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
23163 # (ibmpcx: this entry used to be known as ibmx.
23164 # It formerly included the following extension capabilities:
23165 # :GC=b:GL=v:GR=t:RT=^J:\
23166 # :GH=\E[196g:GV=\E[179g:\
23167 # :GU=\E[193g:GD=\E[194g:\
23168 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
23169 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
23170 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
23171 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
23172 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
23173 # what was there before. -- esr)
23174 ibmpcx|xenix|ibmx|IBM PC xenix console display,
23177 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
23178 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23179 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
23180 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
23181 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
23182 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
23184 ######## OTHER OBSOLETE TYPES
23186 # These terminals are *long* dead -- these entries are retained for
23187 # historical interest only.
23190 #### Obsolete non-ANSI software emulations
23193 # CTRM terminal emulator
23194 # 1. underlining is not allowed with colors: first, is is simulated by
23195 # black on white, second, it disables background color manipulations.
23196 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
23197 # so we have to save their status in the static registers A, B and H
23198 # respectively, to be able to restore them when color changes
23199 # (because any color change turns off ALL attributes)
23200 # 3. <bold> and <rev> sequences alternate modes,
23201 # rather than simply entering them. Thus we have to check the
23202 # static register B and H to determine the status, before sending the
23204 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
23205 # and then reset colors
23206 # 5. implementation of the protect mode would badly penalize the performance.
23207 # we would have to use \E&bn sequence to turn off colors (as well as all
23208 # other attributes), and keep the status of protect mode in yet another
23209 # static variable. If someone really needs this mode, they would have to
23210 # create another terminfo entry.
23211 # 6. original color-pair is white on black.
23212 # store the information about colors into static registers
23213 # 7. set foreground color. it performs the following steps.
23214 # 1) turn off all attributes
23215 # 2) turn on the background and video attributes that have been turned
23216 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
23217 # 3) turn on foreground attributes
23218 # 4) store information about foreground into U,V,W static registers
23219 # 8. turn on background: similar to turn on foreground above
23220 ctrm|C terminal emulator,
23222 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
23223 pairs#63, pb#19200, vt#6,
23224 bel=^G, blink=\E&dA%{1}%PA,
23225 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
23226 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23227 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
23228 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
23229 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
23230 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
23231 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
23232 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
23233 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
23235 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
23236 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
23237 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
23238 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
23239 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
23240 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
23241 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
23242 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
23243 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
23244 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
23245 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
23247 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
23248 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
23250 # gs6300 - can't use blue foreground, it clashes with underline;
23251 # it's simulated with cyan
23252 # Bug: The <op> capability probably resets attributes.
23253 # (gs6300: commented out <rmln> (no <smln>) --esr)
23254 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
23255 am, bce, msgr, xon,
23256 colors#8, cols#80, it#8, lines#24, pairs#63,
23257 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
23259 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
23260 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
23261 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
23262 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
23263 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
23264 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
23265 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
23266 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
23267 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
23268 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
23269 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
23270 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
23271 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
23273 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
23274 # MS-Kermit with Heath-19 emulation mode enabled
23275 # (h19k: changed ":pt@:" to ":it@"
23276 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
23281 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
23282 # Software (formerly Peripherals Computers & Supplies, Inc) of
23283 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
23284 # also be reached at support@synergy.com.
23285 versaterm|versaterm vt100 emulator for the Macintosh,
23287 cols#80, it#8, lines#24,
23288 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
23289 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
23290 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
23291 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
23292 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
23293 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
23294 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
23295 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
23296 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
23297 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
23298 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
23299 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
23302 # From: Rick Thomas <ihnp4!btlunix!rbt>
23303 # (xtalk: I added <rmam>/<smam> based on the init string.
23304 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
23305 am, mir, msgr, xon,
23306 cols#80, it#8, lines#24, vt#3, xmc#1,
23307 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
23308 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
23309 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
23310 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
23311 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
23312 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
23313 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
23314 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
23315 rmkx=\E[?1l\E>, rmso=\E[m\s,
23316 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
23317 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
23318 tbc=\E[3g, use=vt100+fnkeys,
23320 # The official PC terminal emulator program of the AT&T Product Centers.
23321 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
23322 simterm|attpc running simterm,
23325 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
23326 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
23327 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
23328 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
23330 #### Daisy wheel printers
23332 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
23333 # wheel terminals. These are now largely obsolete.
23336 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
23337 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
23340 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
23341 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
23342 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
23344 is2=\r \E9, use=diablo1620,
23345 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
23346 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
23347 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
23349 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
23351 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
23353 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
23354 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
23356 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
23357 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
23358 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
23359 # If no tab is set or the terminal's in a bad mood, it glitches the screen
23360 # around all of memory. Note that return puts a blank ("a return character")
23361 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
23362 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
23363 # curses won't work (some old BSD versions) because it doesn't clear this bit,
23364 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
23365 # I have been unable to get tabs set in all 96 lines - it always leaves at
23366 # least one line with no tabs in it, and once you tab through that line,
23367 # it completely weirds out.
23368 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
23371 cols#80, lines#24, lm#96,
23372 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
23373 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
23374 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
23375 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
23376 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
23380 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23381 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23382 gsi|mystery gsi terminal,
23385 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
23387 aj830|aj832|aj|anderson jacobson,
23389 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
23391 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
23392 aj510|Anderson-Jacobson model 510,
23395 clear=^L, cub1=^H, cuf1=\EX,
23396 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
23397 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
23398 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
23399 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
23400 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
23402 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
23403 # This is incomplete, but it's a start.
23404 nec5520|nec|spinwriter|nec 5520,
23407 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
23408 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
23410 qume5|qume|Qume Sprint 5,
23413 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23414 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23415 # I suspect the xerox 1720 is the same as the diablo 1620.
23416 xerox1720|x1720|x1750|xerox 1720,
23419 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
23422 #### Miscellaneous obsolete terminals, manufacturers unknown
23424 # If you have any information about these (like, a manufacturer's name,
23425 # and a date on the serial-number plate) please send it!
23427 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
23430 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
23431 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
23434 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
23435 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
23436 kf4=\E8, rmso=\Em^C, smso=\Em^L,
23437 cops10|cops|cops-10|cops 10,
23440 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23441 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
23442 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
23444 # (d132: removed duplicate :ic=\E5:,
23445 # merged in capabilities from a BRL entry -- esr)
23446 d132|datagraphix|datagraphix 132a,
23449 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
23450 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
23451 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
23452 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
23453 # The d800 was an early portable terminal from c.1984-85 that looked a lot
23454 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
23455 # mode (which is what this entry looks like) and several other lesser-known
23458 OTbs, am, da, db, msgr, xhp,
23459 cols#80, it#8, lines#24,
23460 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23461 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
23462 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
23463 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
23464 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
23465 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
23466 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23467 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
23468 digilog|digilog 333,
23471 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
23473 # The DWK was a terminal manufactured in the Soviet Union c.1986
23474 dwk|dwk-vt|dwk terminal,
23476 cols#80, it#8, lines#24,
23477 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
23479 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23480 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
23481 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
23482 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
23483 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
23484 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
23485 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
23486 sgr0=\EX, smacs=\EF, smso=\ET,
23487 env230|envision230|envision 230 graphics terminal,
23489 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
23490 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
23492 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
23493 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
23494 # coupler attached, the whole rig fitting in a suitcase and more or less
23495 # portable. Hot stuff for c.1977 :-) -- esr
23496 ep48|ep4080|execuport 4080,
23499 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
23500 ep40|ep4000|execuport 4000,
23501 cols#136, use=ep4080,
23502 # Adam Thompson <athompso@pangea.ca> tells us:
23503 # Informer series - these are all portable units, resembling older
23504 # automatic bread-baking machines. The terminal looks like a `clamshell'
23505 # design, but isn't. The structure is similar to the Direct terminals,
23506 # but only half the width. The entire unit is only about 10" wide.
23507 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
23508 # keyboard. All the keys are crammed together, much like some laptop
23509 # PCs today, but perhaps less well organized...all these units have a
23510 # bewildering array of plugs on the back, including a built-in modem.
23511 # The 305 was a color version of the 304; the 306 and 307 were mono and
23512 # color terminals built for IBM bisync protocols.
23513 # From: Paul Leondis <unllab@amber.berkeley.edu>
23514 ifmr|Informer D304,
23517 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
23518 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
23519 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
23521 # Entry largely based on wy60 and has the features of wy60ak.
23522 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
23523 am, bw, hs, km, mir, msgr, ul, xon,
23524 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
23525 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
23526 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
23527 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
23528 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
23529 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
23530 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
23532 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
23533 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
23535 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
23536 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
23537 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
23538 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
23539 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
23540 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
23541 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
23542 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
23543 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
23544 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
23545 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
23546 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
23547 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
23548 rs3=\EwG\Ee($<150>,
23549 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
23550 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
23551 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
23552 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
23553 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
23555 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
23556 uc=\EG8\EG0, use=adm+sgr,
23557 teletec|Teletec Datascreen,
23560 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
23562 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
23563 # This description is for the LANPAR Technologies VISION 3220
23564 # terminal from 1984/85. The function key definitions k0-k5 represent the
23565 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
23566 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
23568 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
23569 # I had a couple of scopes (3221) like this once where I used to work, around
23570 # the 1987 time frame if memory serves me correctly. These scopes were made
23571 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
23572 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
23573 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
23574 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
23575 # (3221) cost about $1500 each, and one was always broken -- had to be sent
23576 # back to the shop for repairs.
23577 # The only real advantage these scopes had over the VT-240's were:
23578 # 1) They were faster in the Regis display, or at least the ones I did
23579 # 2) They had a handy debugging feature where you could split-screen the
23580 # scope, the graphics would appear on the top, and the REGIS commands would
23581 # appear on the bottom. I don't remember the VT-240s being able to do that.
23582 # I would swear that LANPAR Technologies was in MA someplace, but since I
23583 # don't work at the same place anymore, and those terminals and manuals were
23584 # long since junked, I cannot be any more sure than that.
23586 # (v3220: removed obsolete ":kn#10:",
23587 # I added <rmam>/<smam> based on the init string -- esr)
23588 v3220|LANPAR Vision II model 3220/3221/3222,
23589 OTbs, am, mir, xenl,
23590 cols#80, it#8, lines#24,
23591 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23592 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23593 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
23594 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
23595 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
23596 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
23597 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
23598 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23599 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
23600 ######## ICH/ICH1 VERSUS RMIR/SMIR
23602 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
23603 # are present; the symptom is doubled characters in an update using insert.
23604 # These applications are technically correct; in both 4.3BSD termcap and
23605 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
23606 # unless the terminal needs both. To my knowledge, no terminal still in this
23607 # file requires both other than the very obsolete dm2500.
23609 # For ncurses-based applications this is not a problem, as ncurses uses
23610 # one or the other as appropriate but never mixes the two. Therefore we
23611 # have not corrected entries like `linux' and `xterm' that specify both.
23612 # If you see doubled characters from these, use the linux-nic and xterm-nic
23613 # entries that suppress ich/ich1. And upgrade to ncurses!
23616 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
23618 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
23619 # ECMA-48 standards are said to be almost identical, but are not the same
23620 # as X3.64 (though for practical purposes they are close supersets of it).
23622 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
23623 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
23624 # Coded Character Sets"), include your snail-mail address, and you should
23625 # receive the document in due course. Don't expect an email acknowledgment.
23627 # Related standards include "X3.4-1977: American National Standard Code for
23628 # Information Interchange" (the ASCII standard) and "X3.41.1974:
23629 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
23630 # American National Standard for Information Interchange." I believe (but
23631 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
23635 #### VT100/ANSI/ECMA-48
23637 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
23638 # and ECMA-48 Control Functions for Coded Character Sets.
23640 # Much of the content of this comment is adapted from a table prepared by
23641 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
23642 # discussion of some terminfo-related issues, and updates to capture ECMA-48
23643 # have been added. Control functions described in ECMA-48 only are tagged
23644 # with * after their names.
23646 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
23647 # sequences. In the main table, \E stands for an escape (\033) character,
23648 # SPC for space. Pn stands for a single numeric parameter to be inserted
23649 # in decimal ASCII. Ps stands for a list of such parameters separated by
23650 # semicolons. Parameter meanings for most parameterized sequences are
23651 # described in the notes.
23653 # Sequence Sequence Parameter or
23654 # Mnemonic Name Sequence Value Mode terminfo
23655 # -----------------------------------------------------------------------------
23656 # APC Applicatn Program Command \E _ - Delim -
23657 # BEL Bell * ^G - - bel
23658 # BPH Break Permitted Here * \E B - * -
23659 # BS BackSpace * ^H - EF -
23660 # CAN Cancel * ^X - - - (A)
23661 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
23662 # CCH Cancel Previous Character \E T - - -
23663 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
23664 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
23665 # CMD Coding Method Delimiter * \E
23666 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
23667 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
23668 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
23669 # CSI Control Sequence Intro \E [ - Intro -
23670 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
23671 # CUB Cursor Backward \E [ Pn D 1 eF cub
23672 # CUD Cursor Down \E [ Pn B 1 eF cud
23673 # CUF Cursor Forward \E [ Pn C 1 eF cuf
23674 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
23675 # CUU Cursor Up \E [ Pn A 1 eF cuu
23676 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
23677 # DA Device Attributes \E [ Pn c 0 - -
23678 # DAQ Define Area Qualification \E [ Ps o 0 - -
23679 # DCH Delete Character \E [ Pn P 1 eF dch
23680 # DCS Device Control String \E P - Delim -
23681 # DL Delete Line \E [ Pn M 1 eF dl
23682 # DLE Data Link Escape * ^P - - -
23683 # DMI Disable Manual Input \E \ - Fs -
23684 # DSR Device Status Report \E [ Ps n 0 - - (I)
23685 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
23686 # EA Erase in Area \E [ Ps O 0 eF - (J)
23687 # ECH Erase Character \E [ Pn X 1 eF ech
23688 # ED Erase in Display \E [ Ps J 0 eF ed (J)
23689 # EF Erase in Field \E [ Ps N 0 eF -
23690 # EL Erase in Line \E [ Ps K 0 eF el (J)
23691 # EM End of Medium * ^Y - - -
23692 # EMI Enable Manual Input \E b Fs -
23693 # ENQ Enquire ^E - - -
23694 # EOT End Of Transmission ^D - * -
23695 # EPA End of Protected Area \E W - - - (K)
23696 # ESA End of Selected Area \E G - - -
23697 # ESC Escape ^[ - - -
23698 # ETB End Transmission Block ^W - - -
23699 # ETX End of Text ^C - - -
23700 # FF Form Feed ^L - - -
23701 # FNK Function Key * \E [ Pn SPC W - - -
23702 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
23703 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
23704 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
23705 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
23706 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
23707 # HPB Char Position Backward \E [ j 1 FE -
23708 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
23709 # HT Horizontal Tab * ^I - FE - (N)
23710 # HTJ Horz Tab w/Justification \E I - FE -
23711 # HTS Horizontal Tab Set \E H - FE hts
23712 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
23713 # ICH Insert Character \E [ Pn @ 1 eF ich
23714 # IDCS ID Device Control String \E [ SPC O - * -
23715 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
23716 # IL Insert Line \E [ Pn L 1 eF il
23717 # IND Index \E D - FE -
23718 # INT Interrupt \E a - Fs -
23719 # JFY Justify \E [ Ps SPC F 0 FE -
23720 # IS1 Info Separator #1 * ^_ - * -
23721 # IS2 Info Separator #1 * ^^ - * -
23722 # IS3 Info Separator #1 * ^] - * -
23723 # IS4 Info Separator #1 * ^\ - * -
23724 # LF Line Feed ^J - - -
23725 # LS1R Locking Shift Right 1 * \E ~ - - -
23726 # LS2 Locking Shift 2 * \E n - - -
23727 # LS2R Locking Shift Right 2 * \E } - - -
23728 # LS3 Locking Shift 3 * \E o - - -
23729 # LS3R Locking Shift Right 3 * \E | - - -
23730 # MC Media Copy \E [ Ps i 0 - - (S)
23731 # MW Message Waiting \E U - - -
23732 # NAK Negative Acknowledge * ^U - * -
23733 # NBH No Break Here * \E C - - -
23734 # NEL Next Line \E E - FE nel (D)
23735 # NP Next Page \E [ Pn U 1 eF -
23736 # NUL Null * ^@ - - -
23737 # OSC Operating System Command \E ] - Delim -
23738 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
23739 # PFS Page Format Selection * \E Pn SPC J 0 - -
23740 # PLD Partial Line Down \E K - FE - (T)
23741 # PLU Partial Line Up \E L - FE - (U)
23742 # PM Privacy Message \E ^ - Delim -
23743 # PP Preceding Page \E [ Pn V 1 eF -
23744 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
23745 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
23746 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
23747 # PTX Parallel Texts * \E [ \ - - -
23748 # PU1 Private Use 1 \E Q - - -
23749 # PU2 Private Use 2 \E R - - -
23750 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
23751 # REP Repeat Char or Control \E [ Pn b 1 - rep
23752 # RI Reverse Index \E M - FE - (V)
23753 # RIS Reset to Initial State \E c - Fs -
23754 # RM Reset Mode * \E [ Ps l - - - (W)
23755 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
23756 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
23757 # SCI Single-Char Introducer \E Z - - -
23758 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
23759 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
23760 # SD Scroll Down \E [ Pn T 1 eF rin
23761 # SDS Start Directed String * \E [ Pn ] 1 - -
23762 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
23763 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
23764 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
23765 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
23766 # SI Shift In ^O - - - (P)
23767 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
23768 # SL Scroll Left \E [ Pn SPC @ 1 eF -
23769 # SLH Set Line Home * \E [ Pn SPC U - - -
23770 # SLL Set Line Limit * \E [ Pn SPC V - - -
23771 # SLS Set Line Spacing * \E [ Pn SPC h - - -
23772 # SM Select Mode \E [ Ps h none - - (W)
23773 # SO Shift Out ^N - - - (Q)
23774 # SOH Start Of Heading * ^A - - -
23775 # SOS Start of String * \E X - - -
23776 # SPA Start of Protected Area \E V - - - (Z)
23777 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
23778 # SPH Set Page Home * \E [ Ps SPC G - - -
23779 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
23780 # SPL Set Page Limit * \E [ Ps SPC j - - -
23781 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
23782 # SR Scroll Right \E [ Pn SPC A 1 eF -
23783 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
23784 # SRS Start Reversed String * \E [ Ps [ 0 - -
23785 # SSA Start of Selected Area \E F - - -
23786 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
23787 # SSW Set Space Width * \E [ Pn SPC [ none - -
23788 # SS2 Single Shift 2 (G2 set) \E N - Intro -
23789 # SS3 Single Shift 3 (G3 set) \E O - Intro -
23790 # ST String Terminator \E \ - Delim -
23791 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
23792 # STS Set Transmit State \E S - - -
23793 # STX Start pf Text * ^B - - -
23794 # SU Scroll Up \E [ Pn S 1 eF indn
23795 # SUB Substitute * ^Z - - -
23796 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
23797 # SYN Synchronous Idle * ^F - - -
23798 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
23799 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
23800 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
23801 # TBC Tab Clear \E [ Ps g 0 FE tbc
23802 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
23803 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
23804 # TSS Thin Space Specification \E [ Pn SC E none FE -
23805 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
23806 # VPB Line Position Backward * \E [ Pn k 1 FE -
23807 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
23808 # VT Vertical Tabulation * ^K - FE -
23809 # VTS Vertical Tabulation Set \E J - FE -
23811 # ---------------------------------------------------------------------------
23815 # Some control characters are listed in the ECMA-48 standard without
23816 # being assigned functions relevant to terminal control there (they
23817 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
23818 # here anyway for completeness.
23820 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
23822 # (B) There seems to be some confusion abroad between CHA and HPA. Most
23823 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
23824 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
23825 # preserved the CHA abbreviation.
23827 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
23828 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
23829 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
23830 # CHT abbreviation.
23832 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
23834 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
23837 # (F) CTC parameter values:
23838 # 0 = set char tab,
23839 # 1 = set line tab,
23840 # 2 = clear char tab,
23841 # 3 = clear line tab,
23842 # 4 = clear all char tabs on current line,
23843 # 5 = clear all char tabs,
23844 # 6 = clear all line tabs.
23846 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
23847 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
23848 # Position Absolute" but retains the HVP abbreviation.
23850 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
23853 # (I) DSR parameter values:
23856 # 2 = busy, will send DSR later,
23858 # 4 = malfunction, will send DSR later,
23860 # 6 = request CPR response.
23862 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
23863 # 0 = clear to end,
23864 # 1 = clear from beginning,
23867 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
23869 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
23871 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
23872 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
23873 # Position Relative" but retains the HPR abbreviation.
23875 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
23878 # (O) SGR parameter values:
23879 # 0 = default mode (attributes off),
23886 # 7 = reverse video,
23888 # 9 = crossed-out (marked for deletion),
23889 # 10 = primary font,
23890 # 10 + n (n in 1..9) = nth alternative font,
23892 # 21 = double underline,
23897 # 26 = proportional spacing,
23909 # 38 = set fg color as in CCITT T.416,
23910 # 39 = set default fg color,
23919 # 48 = set bg color as in CCITT T.416,
23920 # 49 = set default bg color,
23921 # 50 = turn off 26,
23925 # 54 = turn off 51 & 52,
23926 # 55 = not overlined,
23927 # 56-59 = reserved,
23928 # 61-65 = variable highlights for ideograms.
23930 # (P) SI is also called LSO, Locking Shift Zero.
23932 # (Q) SI is also called LS1, Locking Shift One.
23934 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
23935 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
23936 # Absolute' but retains the VPA abbreviation.
23938 # (S) MC parameters:
23939 # 0 = start xfer to primary aux device,
23940 # 1 = start xfer from primary aux device,
23941 # 2 = start xfer to secondary aux device,
23942 # 3 = start xfer from secondary aux device,
23943 # 4 = stop relay to primary aux device,
23944 # 5 = start relay to primary aux device,
23945 # 6 = stop relay to secondary aux device,
23946 # 7 = start relay to secondary aux device.
23948 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
23951 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
23954 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
23956 # (W) RM/SM modes are as follows:
23957 # 1 = Guarded Area Transfer Mode (GATM),
23958 # 2 = Keyboard Action Mode (KAM),
23959 # 3 = Control Representation Mode (CRM),
23960 # 4 = Insertion Replacement Mode (IRM),
23961 # 5 = Status Report Transfer Mode (SRTM),
23962 # 6 = Erasure Mode (ERM),
23963 # 7 = Line Editing Mode (LEM),
23964 # 8 = Bi-Directional Support Mode (BDSM),
23965 # 9 = Device Component Select Mode (DCSM),
23966 # 10 = Character Editing Mode (HEM),
23967 # 11 = Positioning Unit Mode (PUM),
23968 # 12 = Send/Receive Mode (SRM),
23969 # 13 = Format Effector Action Mode (FEAM),
23970 # 14 = Format Effector Transfer Mode (FETM),
23971 # 15 = Multiple Area Transfer Mode (MATM),
23972 # 16 = Transfer Termination Mode (TTM),
23973 # 17 = Selected Area Transfer Mode (SATM),
23974 # 18 = Tabulation Stop Mode (TSM),
23975 # 19 = Editing Boundary Mode (EBM),
23976 # 20 = Line Feed New Line Mode (LF/NL),
23977 # 21 = Graphic Rendition Combination Mode (GRCM),
23978 # 22 = Zero Default Mode (ZDM).
23980 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
23981 # but are listed here for reference.
23983 # (X) Select Alternate Presentation Variants is used only for non-Latin
23986 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
23988 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
23991 # ---------------------------------------------------------------------------
23995 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
23996 # X3.64 Control Sequence Introducer is the two characters "Escape ["
23998 # Delim a Delimiter
24000 # x/y identifies a character by position in the ASCII table (column/row)
24002 # eF editor function (see explanation)
24004 # FE format effector (see explanation)
24006 # F is a Final character in
24007 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
24008 # a control sequence (F from 4/0 to 7/14)
24010 # Gs is a graphic character appearing in strings (Gs ranges from
24011 # 2/0 to 7/14) in the ASCII table
24013 # Ce is a control represented as a single bit combination in the C1 set
24014 # of controls in an 8-bit character set
24016 # C0 the familiar set of 7-bit ASCII control characters
24018 # C1 roughly, the set of control chars available only in 8-bit systems.
24019 # This is too complicated to explain fully here, so read Jim Fleming's
24020 # article in the February 1983 BYTE, especially pages 214 through 224.
24022 # Fe is a Final character of a 2-character Escape sequence that has an
24023 # equivalent representation in an 8-bit environment as a Ce-type
24024 # (Fe ranges from 4/0 to 5/15)
24026 # Fs is a Final character of a 2-character Escape sequence that is
24027 # standardized internationally with identical representation in 7-bit
24028 # and 8-bit environments and is independent of the currently
24029 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
24031 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
24034 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
24037 # Pn is a numeric parameter in a control sequence, a string of zero or
24038 # more characters ranging from 3/0 to 3/9 in the ASCII table
24040 # Ps is a variable number of selective parameters in a control sequence
24041 # with each selective parameter separated from the other by the code
24042 # 3/11 (which usually represents a semicolon); Ps ranges from
24043 # 3/0 to 3/9 and includes 3/11
24045 # * Not relevant to terminal control, listed for completeness only.
24047 # Format Effectors versus Editor Functions
24049 # A format effector specifies how following output is to be displayed.
24050 # An editor function allows you to modify the display. Informally
24051 # format effectors may be destructive; format effectors should not be.
24053 # For instance, a format effector that moves the "active position" (the
24054 # cursor or equivalent) one space to the left would be useful when you want to
24055 # create an overstrike, a compound character made of two standard characters
24056 # overlaid. Control-H, the Backspace character, is actually supposed to be a
24057 # format effector, so you can do this. But many systems use it in a
24058 # nonstandard fashion, as an editor function, deleting the character to the
24059 # left of the cursor and moving the cursor left. When Control-H is assumed to
24060 # be an editor function, you cannot predict whether its use will create an
24061 # overstrike unless you also know whether the output device is in an "insert
24062 # mode" or an "overwrite mode". When Control-H is used as a format effector,
24063 # its effect can always be predicted. The familiar characters carriage
24064 # return, linefeed, formfeed, etc., are defined as format effectors.
24066 # NOTES ON THE DEC VT100 IMPLEMENTATION
24068 # Control sequences implemented in the VT100 are as follows:
24070 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
24071 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
24073 # plus several private DEC commands.
24075 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
24077 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
24078 # Erase from beginning of line to cursor Esc [ 1 K
24079 # Erase line containing cursor Esc [ 2 K
24080 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
24081 # Erase from beginning of screen to cursor Esc [ 1 J
24082 # Erase entire screen Esc [ 2 J
24084 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
24085 # Esc [ 2 J, but this is wrong; the default is 0.
24087 # The VT100 responds to receiving the DA (Device Attributes) control
24089 # Esc [ c (or Esc [ 0 c)
24091 # by transmitting the sequence
24095 # where Ps is a character that describes installed options.
24097 # The VT100's cursor location can be read with the DSR (Device Status
24102 # The VT100 reports by transmitting the CPR sequence
24106 # where Pl is the line number and Pc is the column number (in decimal).
24108 # The specification for the DEC VT100 is document EK-VT100-UG-003.
24112 # Here is a description of the color and attribute controls supported in the
24113 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
24114 # terminal emulators for Intel boxes obey these. They are a proper subset
24115 # of the ECMA-48 escapes.
24117 # 0 all attributes off
24118 # 1 foreground bright
24120 # 5 blink on/background bright (not reliable with brown)
24122 # 8 set blank (non-display)
24123 # 10 set primary font
24124 # 11 set first alternate font (on PCs, display ROM characters 1-31)
24125 # 12 set second alternate font (on PCs, display IBM high-half chars)
24127 # Color attribute sets
24128 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
24129 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
24130 # Bright black becomes gray. Bright brown becomes yellow,
24131 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
24133 # * If the 5 attribute is on and you set a background color (40-47) it is
24134 # supposed to enable bright background.
24136 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
24137 # when you try to set a "bright brown" (yellow) background with attribute
24138 # 5 (you get a blinking yellow foreground instead). A few displays
24139 # (including the System V console) support an attribute 6 that undoes this
24140 # braindamage (this is required by iBCS2).
24142 # * Some older versions of ANSI.SYS have a bug that causes them to require
24143 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
24146 #### Intel Binary Compatibility Standard
24148 # For comparison, here are the capabilities implied by the Intel Binary
24149 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
24150 # These recommendations are optional. IBCS2 allows the leading escape to
24151 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
24152 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
24153 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
24154 # terminfo entry are followed with the corresponding capability in parens:
24156 # CSI <n>k disable (n=0) or enable (n=1) keyclick
24157 # CSI 2h lock keyboard
24158 # CSI 2i send screen as input
24159 # CSI 2l unlock keyboard
24160 # CSI 6m enable background color intensity
24161 # CSI <0-2>c reserved
24162 # CSI <0-59>m select graphic rendition
24163 # CSI <n>;<m>H (cup) cursor to line n and column m
24164 # CSI <n>;<m>f cursor to line n and column m
24165 # CSI <n>@ (ich) insert characters
24166 # CSI <n>A (cuu) cursor up n lines
24167 # CSI <n>B (cud) cursor down n lines
24168 # CSI <n>C (cuu) cursor right n characters
24169 # CSI <n>D (cud) cursor left n characters
24170 # CSI <n>E cursor down n lines and in first column
24171 # CSI <n>F cursor up n lines and in first column
24172 # CSI <n>G (hpa) position cursor at column n-1
24173 # CSI <n>J (ed) erase in display
24174 # CSI <n>K (el) erase in line
24175 # CSI <n>L (il) insert line(s)
24176 # CSI <n>P (dch) delete characters
24177 # CSI <n>S (indn) scroll up n lines
24178 # CSI <n>T (rin) scroll down n lines
24179 # CSI <n>X (ech) erase characters
24180 # CSI <n>Z (cbt) back up n tab stops
24181 # CSI <n>` cursor to column n on line
24182 # CSI <n>a (cuu) cursor right n characters
24183 # CSI <n>d (vpa) cursor to line n
24184 # CSI <n>e cursor down n lines and in first column
24185 # CSI <n>g (cbt) clear all tabs
24186 # CSI <n>z make virtual terminal n active
24187 # CSI ?7h (smam) turn automargin on
24188 # CSI ?7l (rmam) turn automargin off
24189 # CSI s save cursor position
24190 # CSI u restore cursor position to saved value
24191 # CSI =<c>A set overscan color
24192 # CSI =<c>F set normal foreground color
24193 # CSI =<c>G set normal background color
24194 # CSI =<c>H set reverse foreground color
24195 # CSI =<c>I set reverse foreground color
24196 # CSI =<c>J set graphic foreground color
24197 # CSI =<c>K set graphic foreground color
24198 # CSI =<n>g (dispc) display n from alternate graphics character set
24199 # CSI =<p>;<d>B set bell parameters
24200 # CSI =<s>;<e>C set cursor parameters
24201 # CSI =<x>D enable/disable intensity of background color
24202 # CSI =<x>E set/clear blink vs. bold background
24203 # CSI 7 (sc) (sc) save cursor position
24204 # CSI 8 (rc) (rc) restore cursor position to saved value
24205 # CSI H (hts) (hts) set tab stop
24206 # CSI Q<n><string> define function key string
24207 # (string must begin and end with delimiter char)
24208 # CSI c (clear) clear screen
24210 # The lack of any specification for attributes in SGR (among other things)
24211 # makes this a wretchedly weak standard. The table above is literally
24212 # everything iBSC2 has to say about terminal escape sequences; there is
24213 # no further discussion of their meaning or how to set the parameters
24214 # in these sequences at all.
24217 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
24219 # The historical termcap file entries were written primarily in 4.4BSD termcap.
24220 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
24221 # with the extension names chosen for compatibility with the termcap names
24222 # assigned in System V terminfo. There are some variant extension sets out
24223 # there. We try to describe them here.
24225 #### XENIX extensions:
24227 # The XENIX extensions include a set of function-key capabilities as follows:
24229 # code XENIX variable name terminfo name name clashes?
24230 # ---- ------------------- ------------- -----------------------
24232 # CR key_char_right
24233 # CW key_change_window create_window
24235 # HM key_home khome
24237 # LD key_delete_line kdl1
24238 # LF key_linefeed label_off
24239 # NU key_next_unlocked_cell
24240 # PD key_page_down knp
24242 # PN start_print mc5
24244 # PS stop_print mc4
24245 # PU key_page_up kpp pulse
24246 # RC key_recalc remove_clock
24247 # RF key_toggle_ref req_for_input
24248 # RT key_return kent
24249 # UP key_up_arrow kcuu1 parm_up_cursor
24251 # WR key_word_right
24253 # The XENIX extensions also include the following character-set and highlight
24256 # XENIX terminfo function
24257 # ----- -------- ------------------------------
24258 # GS smacs start alternate character set
24259 # GE rmacs end alternate character set
24260 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
24261 # bo blink begin blink (not used in /etc/termcap)
24262 # be end blink (not used in /etc/termcap)
24263 # bb blink glitch (not used in /etc/termcap)
24264 # it dim begin dim (not used in /etc/termcap)
24265 # ie end dim (not used in /etc/termcap)
24266 # ig dim glitch (not used in /etc/termcap)
24268 # Finally, XENIX also used the following forms-drawing capabilities:
24270 # single double type ASCII approximation
24271 # ------ ------ ------------- -------------------
24272 # GV Gv vertical line |
24273 # GH Gv horizontal line - _
24274 # G1 G5 top right corner _ |
24275 # G2 G6 top left corner |
24276 # G3 G7 bottom left corner |_
24277 # G4 G8 bottom right corner _|
24278 # GD Gd down-tick character T
24279 # GL Gl left-tick character -|
24280 # GR Gr right-tick character |-
24281 # GC Gc middle intersection -|-
24282 # GU Gu up-tick character _|_
24284 # These were invented to take advantage of the IBM PC ROM character set. One
24285 # can compose an acsc string from the single-width characters as follows
24286 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
24287 # When translating a termcap file, ncurses tic will do this automatically.
24288 # The double forms characters don't fit the SVr4 terminfo model.
24290 #### AT&T Extensions:
24292 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
24293 # nonstandard capabilities. Its signature is the KM capability, used to name
24294 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
24295 # set. Comments in the original, and a little cross-checking with other AT&T
24296 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
24297 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
24298 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
24299 # cursor invisible), and CV=:ve: (make cursor normal).
24303 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
24304 # have the System V capabilities up to SVr1 level. After that, it supports
24305 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
24306 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
24307 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
24308 # HP binary format incompatible with SVr4's.
24310 #### IBM Extensions
24312 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
24313 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
24314 # capabilities following prtr_non with the following special capabilities:
24315 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
24316 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
24317 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
24318 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
24319 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
24320 # renamed (to kcbt and kslt). The places in the box[12] capabilities
24321 # correspond to acsc chars, here is the mapping:
24323 # box1[0] = ACS_ULCORNER
24324 # box1[1] = ACS_HLINE
24325 # box1[2] = ACS_URCORNER
24326 # box1[3] = ACS_VLINE
24327 # box1[4] = ACS_LRCORNER
24328 # box1[5] = ACS_LLCORNER
24329 # box1[6] = ACS_TTEE
24330 # box1[7] = ACS_RTEE
24331 # box1[8] = ACS_BTEE
24332 # box1[9] = ACS_LTEE
24333 # box1[10] = ACS_PLUS
24335 # The box2 characters are the double-line versions of these forms graphics.
24336 # The AIX binary terminfo format is incompatible with SVr4's.
24338 #### Iris console extensions:
24340 # HS is half-intensity start; HE is half-intensity end
24341 # CT is color terminal type (for Curses & rogue)
24342 # CP is color change escape sequence
24343 # CZ are color names (for Curses & rogue)
24345 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
24347 #### TC Extensions:
24349 # There is a set of extended termcaps associated with something
24350 # called the "Terminal Control" or TC package created by MainStream Systems,
24351 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
24352 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
24353 # that flags color terminals.
24355 ######## NCURSES USER-DEFINABLE CAPABILITIES
24357 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
24358 # infocmp to manipulate user-definable capabilities. Those that are intended
24359 # for use in either terminfo or termcap use 2-character names. Extended
24360 # function keys do not use 2-character names, and are available only with
24363 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
24364 # tic/infocmp, and uses this database (with a few changes). There are a few
24365 # differences, noted in
24366 # https://invisible-island.net/ncurses/ncurses-netbsd.html
24368 # ncurses makes explicit checks for a few user-definable capabilities: AX,
24369 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
24371 #### SCREEN Extensions:
24373 # The screen program uses the termcap interface. It recognizes a few useful
24374 # nonstandard capabilities. Those are used in this file.
24376 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
24378 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
24379 # E0 (str) Switch charset 'G0' back to standard charset.
24380 # S0 (str) Switch charset 'G0' to the specified charset.
24381 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
24384 # AX is relatively straightforward; it is interpreted by ncurses to say that
24385 # SGR 39/49 reset the terminal's foreground and background colors to their
24388 # XT is harder, since screen's manpage does not give more details. For that,
24389 # we must read screen's source-code. For example, when XT is set, screen
24392 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
24393 # screen may also set the terminal's name, which is (for xterm) distinct
24394 # from the icon name.
24395 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
24396 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
24397 # this is an rxvt feature.
24398 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
24399 # These are from xterm, although xterm accepts mouse codes that may not be
24400 # recognized by screen, e.g., 1005, 1006.
24401 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
24402 # sequence. However, because screen uses only termcap, the values returned
24403 # by Af/Ab are not usable because they rely on expressions that termcap
24404 # does not support. Therefore, screen uses a hardcoded string to work
24405 # around the limitation. In a few cases, screen also uses tparm, which
24406 # is a terminfo function rather than termcap.
24407 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
24408 # g) screen also uses the feature to decide whether to pay attention to other
24409 # xterm-related features which are unrelated to the description in the
24412 # Since XT is useful only when the outer terminal matches screen's assumptions,
24413 # it is appropriate to use it in the derived terminal descriptions such as
24414 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
24416 # The other ISO-2022 features are rarely used, but provided here to make
24417 # screen's termcap features available.
24419 #### XTERM Extensions:
24421 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
24422 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
24423 # additional function-key strings. Some other developers copied the feature,
24424 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
24425 # these key definitions less ambiguous.
24427 # A few terminals provide similar functionality (sending distinct keys when
24428 # a modifier is used), including rxvt.
24430 # These are the extended keys defined in this file:
24432 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
24433 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
24434 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
24435 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
24437 # Here are the other xterm-related extensions which are used in this file:
24439 # Cr is a string capability which resets the cursor color
24440 # Cs is a string capability which sets the cursor color to a given value.
24441 # The single string parameter is the color name/number, according to the
24443 # Ms modifies the selection/clipboard. Its parameters are
24444 # p1 = the storage unit (clipboard, selection or cut buffer)
24445 # p2 = the base64-encoded clipboard content.
24446 # Se resets the cursor style to the terminal power-on default.
24447 # Ss is a string capability with one numeric parameter. It is used to set the
24448 # cursor style as described by the DECSCUSR function to a block or
24450 # TS is a string capability which acts like "tsl", but uses no parameter and
24451 # goes to the first column of the "status line".
24452 # XM is a string capability which overrides ncurses's built-in string which
24453 # enables/disables xterm mouse mode.
24454 # xm shows the format of the mouse responses. Parameters are (from zero):
24458 # p4 = state, e.g., pressed or released
24459 # p5 = y-ordinate starting region
24460 # p6 = x-ordinate starting region
24461 # p7 = y-ordinate ending region
24462 # p8 = x-ordinate ending region
24463 # Other extensions, used in xm:
24466 #### Miscellaneous extensions:
24468 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
24469 # This was implemented for the Hurd.
24470 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
24471 # experimental feature of tmux.
24472 # E3 clears the terminal's scrollback buffer. This was implemented in the
24473 # Linux 3.0 kernel as a security feature. It matches a feature which was
24474 # added in xterm patch #107.
24475 # U8 is a numeric capability which denotes a terminal emulator which does not
24476 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
24477 # value to enable it.
24478 # Smulx modifies the appearance of underlines in VTE, December 2017.
24480 ######## CHANGE HISTORY
24482 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
24483 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
24484 # maintained by Eric S. Raymond as part of the ncurses project.
24486 # This file contains all the capability information present in John Kunze's
24487 # last version of the termcap master file, except as noted in the change
24488 # comments at end of file. Some information about very ancient obsolete
24489 # capabilities has been moved to comments. Some all-numeric names of older
24490 # terminals have been retired.
24492 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
24493 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
24494 # used by BSD curses.
24496 # The 9.1.0 version of this file was translated from my lightly-edited copy of
24497 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
24498 # the purpose. Unless the ncurses tic implementation and the Lisp code were
24499 # making perfectly synchronized mistakes which I then failed to catch by
24500 # eyeball, the translation was correct and perfectly information-preserving.
24502 # Major version number bumps correspond to major version changes in ncurses.
24504 # Here is a log of the changes since then:
24506 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
24507 # * First terminfo master translated from 8.3.
24508 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
24509 # * Replaced Wyse entries with updated entries supplied by vendor.
24511 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
24512 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
24513 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
24514 # * Better XENIX keycap translation. Describe TC termcaps.
24515 # * Contact and history info supplied by Qume.
24516 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
24517 # * Raided the Shuford FTP site for recent termcaps/terminfos.
24518 # * Added information on X3.64 and VT100 standard escape sequences.
24519 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
24520 # * Added a correct X11R6 xterm entry.
24521 # * Fixed terminfo translations of padding.
24522 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
24523 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
24524 # * Added u6/u7/u8/u9 capabilities.
24525 # * Added PCVT entry.
24526 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
24527 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
24528 # to use reverse-video standout so Emacs will look right.
24529 # * Added el1 capability to ansi.
24530 # * Added smacs/rmacs to ansi.sys.
24532 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
24533 # * New mt70 entry.
24534 # * Added COPYRIGHTS AND OTHER DELUSIONS.
24535 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
24536 # smartvid & smarterm, ampex 175 & 219 & 232,
24537 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
24538 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
24539 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
24540 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
24541 # * Replaced the Perkin-Elmer entries with vendor's official ones.
24542 # * Restored the old minimal-ansi entry, luna needs it.
24543 # * Fixed some incorrect ip and proportional-padding translations.
24544 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
24545 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
24546 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
24547 # to force a particular height.
24548 # * Added beehive4 and reorganized other Harris entries.
24549 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
24550 # * Merged in DEC's official entries for its terminals. The only old
24551 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
24552 # * Replaced the translated BBN BitGraph entries with purpose-built
24553 # ones from AT&T's SVr3.
24554 # * Replaced the AT&T entries with AT&T's official terminfos.
24555 # * Added teleray 16, vc415, cops10.
24556 # * Merged in many individual capabilities from SCO terminfo files.
24557 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
24559 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
24560 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
24561 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
24562 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
24563 # simterm, citoh and variants.
24564 # * Replaced sol entry with sol1 and sol2.
24565 # * Replaced Qume QVT and Freedom-series entries with purpose-built
24566 # terminfo entries.
24567 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
24568 # and dg200 entries using caps from from SCO.
24569 # * Added the usual set of function-key mappings to ANSI entry.
24570 # * Corrected xterm's function-key capabilities.
24571 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
24572 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
24573 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
24574 # * Fix in xterm entry, get the arrow keys right.
24575 # * Change some \0 escapes to \200.
24576 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
24577 # * Added apple (Videx card), adm1a, oadm31.
24578 # * Fixed malformed ampex csr.
24579 # * Fixed act4, cyb110; they had old-style prefix padding left in.
24580 # * Changed mandatory to advisory padding in many entries.
24581 # * Replaced HP entries up to hpsub with purpose-built ones.
24582 # * Blank rmir/smir/rmdc/smdc capabilities removed.
24583 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
24584 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
24585 # * Replaced the Ann Arbor entries with SCO's, the init strings are
24586 # more efficient (but the entries otherwise identical).
24587 # * Added dg211 from Shuford archive.
24588 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
24589 # adm42-nl, pc52, gs6300, xerox820, uts30.
24590 # * Pull SCO's padding into vi200 entry.
24591 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
24592 # entries merged in from SCO's descriptions.
24593 # * Fixed old-style prefix padding on zen50, h1500.
24594 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
24595 # entry from SCO's description.
24596 # * Reorganized the special entries.
24597 # * Added lm#0 to cbunix and virtual entries.
24599 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
24600 # * Restored cdc456tst.
24601 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
24602 # * Added megatek, beacon, microkit.
24603 # * Freeze for ncurses-1.9 release.
24604 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
24605 # * Added historical data for TAB.
24606 # * Comment fixes from David MacKenzie.
24607 # * Added the new BSDI pc3 entry.
24608 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
24609 # * A change in the tic -C logic now ensures that all entries in
24610 # the termcap translation will fit in < 1024 bytes.
24611 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
24612 # from GNU termcap file. This merges in all their local information.
24613 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
24614 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
24615 # * Added warnings about entries with long translations (restoring
24616 # all the GNU termcaps pushes a few over the edge).
24617 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
24618 # * Yet another tic change, and a couple of entry tweaks, to reduce the
24619 # number of long (> 1024) termcap translations back to 0.
24621 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
24622 # * Added kf13-kf20 to Linux entry.
24623 # * Regularize Prime terminal names.
24624 # * Historical data on Synertek.
24625 # * Freeze for ncurses-1.9.1.
24626 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
24627 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
24628 # * Eliminate whitespace in short name fields, this tanks some scripts.
24629 # * Name field changes to shorten some long entries.
24630 # * Termcap translation now automatically generates empty rmir/smir
24631 # when ich1/ich is present (copes with an ancient vi bug).
24632 # * Added `screen' entries from FSF's screen-3.6.2.
24633 # * Added linux-nic and xterm-nic entries.
24634 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
24635 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
24636 # eliminating some special-case code in ncurses.
24638 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
24639 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
24640 # that captures everything unique from it.
24641 # * Added reorder script generator.
24642 # * Freeze for ncurses 1.9.2 release.
24643 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
24644 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
24645 # * Added Olaf Siebert's corrections for adm12.
24646 # * ansi-pc-color now includes the colors and pairs caps, so that
24647 # entries which use it will inherit them automatically.
24648 # * The linux entry can now recognize the center (keypad 5) key.
24649 # * Removed some junk that found its way into Linux acsc.
24651 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
24652 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
24653 # * xterm doesn't try to use application keypad mode any more.
24654 # * Freeze for ncurses-1.9.3 release.
24655 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
24656 # * Added corrected sun entry from vendor.
24657 # * Added csr capability to linux entry.
24658 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
24659 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
24660 # * Some commented-out caps in long entries come back in, my code
24661 # for computing string-table lengths had a bug in it.
24662 # * pcansi series modified to fit comm-program reality better.
24663 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
24664 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
24665 # * Correct some bad aliases in the pcansi series
24666 # * Added entry for QNX console.
24667 # * Clean up duplicate long names for use with 4.4 library.
24668 # * Change vt100 standout to be normal reverse vide, not bright reverse;
24669 # this makes the Emacs status line look better.
24670 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
24671 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
24672 # * Minor surgery, mostly on name strings, to shorten termcap version.
24674 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
24675 # * Added dec-vt100 for use with the EWAN emulator.
24676 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
24677 # * Freeze for 1.9.5 alpha release.
24678 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
24679 # * Changed xterm lines to 24, the X11R6 default.
24680 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
24681 # * Added 7 newly discovered, undocumented acsc characters to linux
24682 # entry (the pryz{|} characters).
24683 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
24684 # * Correct two typos in the xterm entries introduced in 9.9.1.
24685 # * I finally figured out how to translate ko capabilities. Done.
24686 # * Added tvi921 entries from Tim Theisen.
24687 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
24688 # * Removed mystery tec entry, it was neither interesting nor useful.
24689 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
24690 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
24691 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
24692 # by making them relative to use capabilities
24693 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
24694 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
24695 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
24697 # * Translate all home=\E[;H capabilities to home=\E[H, they're
24699 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
24700 # vt100 and ANSI-like terminals.
24701 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
24702 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
24703 # does this now, too.
24704 # * fviewpoint is gone, it duplicated screwpoint.
24705 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
24706 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
24707 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
24708 # The UW vi50 replaces the old one, which becomes vi50adm,
24709 # * No more embedded commas in name fields.
24711 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
24712 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
24713 # * Introduced klone+* entries for describing Intel-console behavior.
24714 # * Linux kbs is default-mapped to delete for some brain-dead reason.
24715 # * -nsl -> -ns. The -pp syntax is obsolete.
24716 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
24717 # * Make xterm entry do application-keypad mode again. I got complaints
24718 # that it was messing up someone's 3270 emulator.
24719 # * Added some longname fields in order to avoid warning messages from
24720 # older tic implementations.
24721 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
24722 # it! (This gives us pi, greater than, less than, and a few more.)
24723 # * Freeze for ncurses-1.9.6 release.
24724 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
24725 # * Add xon to a number of console entries, they're memory-mapped and
24726 # don't need padding.
24727 # * Correct the use dependencies in the ansi series.
24728 # * Hand-translate more XENIX capabilities.
24729 # * Added hpterm entry for HP's X terminal emulator.
24730 # * Added aixterm entries.
24731 # * Shortened four names so everything fits in 14 chars.
24733 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
24734 # * Added ibcs2 entry and info on iBCS2 standard.
24735 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
24736 # * We can handle the HP meml/memu capability now.
24737 # * Added smacs to klone entries, just as documentation.
24738 # * Corrected ansi.sys and cit-500 entries.
24739 # * Added z39, vt320-k311, v220c, and avatar entries.
24740 # * Make pcansi use the ansi.sys invis capability.
24741 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
24742 # tvi925, tvi950, dt80, ncr7900i, h19.
24743 # * X3.64 has been withdrawn, change some references.
24744 # * Removed function keys from ansi-m entry.
24745 # * Corrected ansi.sys entry.
24746 # * Freeze for ncurses-1.9.7 release.
24747 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
24748 # * Added rmam/smam capabilities to many entries based on init strings.
24749 # * Added correct hpa/vpa to linux.
24750 # * Reduced several entries relative to vt52.
24751 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
24752 # * Exiled some utterly unidentifiable custom and homebrew types to the
24753 # UFO file; also, obsolete small-screen hardware; also, entries which
24754 # look flat-out incorrect, garbled, or redundant. These include the
24755 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
24756 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
24757 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
24758 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
24759 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
24760 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
24761 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
24762 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
24763 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
24764 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
24765 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
24766 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
24767 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
24768 # * Corrected pcvt25h as suggested by Brian C. Grayson
24769 # <bgrayson@pine.ece.utexas.edu>.
24770 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
24771 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
24772 # * Added kent=\EOM to xterm entry.
24774 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
24775 # * Corrected gigi entry.
24776 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
24777 # bad hpa/vpa capabilities.
24778 # * Corrected flash strings to have a uniform delay of .2 sec. No
24779 # more speed-dependent NUL-padding!
24780 # * terminfo capabilities in comments bracketed with <>.
24781 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
24782 # * Replaced pcvt with the 3.31 pcvt entries.
24783 # * Freeze for 1.9.7a.
24784 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
24785 # * Added emu entry from the X11R6 contrib tape sources.
24787 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
24788 # * Improved iris-ansi and sun entries.
24789 # * More flash string improvements.
24790 # * Corrected wy160 & wy160 as suggested by Robert Dunn
24791 # * Added dim to at386.
24792 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
24793 # he's ready to start using the termcap generated from this one.
24794 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
24795 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
24796 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
24797 # att610, att620, att630,
24798 # * Changed hazeltine name prefix from h to hz.
24799 # * Sent t500 to the UFI file.
24800 # * I think we've sucked all the juice out of BSDI's termcap file now.
24801 # * Freeze for ncurses 1.9.8 release
24802 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
24803 # * Unfreeze, linux kbs needed to be fixed.
24804 # * Tim Theisen pinned down a bug in the DMD firmware.
24805 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
24806 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
24807 # (The broken ones had been shadowed by sgr.)
24808 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
24809 # * Added documentation on ECMA-48 standard.
24810 # * New Amiga entry.
24811 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
24812 # * More ECMA-48 stuff
24813 # * Corrected typo in minix entry, added pc-minix.
24814 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
24815 # * Added rxvt entry.
24816 # * Added 1.3.x color-change capabilities to linux entry.
24817 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
24818 # * Corrected rxvt entry khome/kend.
24819 # * Corrected linux color change capabilities.
24820 # * NeXT entries from Dave Wetzel.
24821 # * Cleaned up if and rf file names (all in /usr/share now).
24822 # * Changed linux op capability to avoid screwing up a background color
24823 # pair set by setterm.
24824 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
24825 # * Added xterm-sun.
24826 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
24829 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
24830 # * Another sweep through the Shuford archive looking for new info.
24831 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
24832 # * Added st52 from Per Persson.
24833 # * Added eterm from the GNU Emacs 19.30 distribution.
24834 # * Freeze for 1.9.9.
24835 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
24836 # * FreeBSD console entries from Andrew Chernov.
24837 # * Removed duplicate Atari st52 name.
24838 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
24839 # * xterm doesn't actually have ACS_BLOCK.
24840 # * Change klone+color setf/setb to simpler forms that can be
24841 # translated into termcap.
24843 # * Removed mechanically-generated junk capabilities from cons* entries.
24844 # * Added color support to bsdos.
24845 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
24846 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
24847 # * Created ecma+color, linux can use it. Also added ech to linux.
24848 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
24849 # * Add descriptions to FreeBSD console entries. Also shorten
24850 # some aliases to <= 14 chars for portability.
24851 # * Added x68k console
24852 # * Added OTbs to several VT-series entries.
24853 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
24854 # * screen entry update for 3.7.1 from Michael Alan Dorman.
24855 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
24856 # * kterm correction due to Kenji Rikitake.
24857 # * ACS correction in vt320-kll due to Phillippe De Muyter.
24858 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
24859 # * Sun console entry correction from J.T. Conklin.
24860 # * Changed all DEC VT300 and up terminals to use VT300 tab set
24861 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
24862 # * Added smul to linux entry (we never noticed it was missing
24863 # because of sgr!).
24864 # * Added rmln to hp+labels (deduced from other HP entries).
24865 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
24866 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
24867 # * Corrected vt220 acsc.
24868 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
24869 # this corresponds to reality and helps prevent some tic warnings.
24870 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
24871 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
24872 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
24873 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
24874 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
24875 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
24876 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
24877 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
24878 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
24879 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
24880 # ifmr, v3220, wy100q, tandem653, ibmaed.
24881 # * Added DWK terminal description.
24882 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
24883 # * Many entries now have highlights inherited from adm+sgr.
24884 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
24885 # * xtitle and xtitle-twm enable access to the X status line.
24886 # * Added linux-1.3.6 color palette caps in conventional format.
24887 # * Added adm1178 terminal.
24888 # * Move fos and apollo terminals to obsolete category.
24889 # * Aha! The BRL terminals file told us what the Iris extensions mean.
24890 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
24891 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
24893 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
24894 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
24895 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
24896 # * Corrected, from BRL termcap file: vi50.
24897 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
24898 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
24899 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
24900 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
24901 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
24902 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
24903 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
24904 # * Paired-attribute fixes to various terminals.
24905 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
24906 # * xterm entry corrections from Thomas Dickey.
24907 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
24908 # * Added t916 entry, translated from a termcap in SCO's support area.
24909 # * New qnx entry from Michael Hunter.
24910 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
24911 # * Added hpex2 from Ville Sulko.
24912 # * Fixed a bug that ran the qnx and pcvtXX together.
24913 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
24914 # * Added dtterm entry from Solaris CDE.
24915 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
24916 # * corrected pairs#8 typo in dtterm entry.
24918 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
24919 # * updated xterm entry to cover 3.1.2E's new features.
24920 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
24921 # * Added new minix entry
24922 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
24923 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
24924 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
24925 # * Added Prism entries and kt7ix.
24926 # * Caution notes about EWAN and tabset files.
24927 # * Changed /usr/lib/tabset -> /usr/share/tabset.
24928 # * Added acsc/rmacs/smacs to vt52.
24929 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
24930 # * Merged in Thomas Dickey's reorganization of the xterm entries;
24931 # added technical corrections to avoid warning messages.
24932 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
24933 # * Added rmso=\E[27m in Linux entry.
24934 # * Added koi8-r support for Linux console.
24935 # * Replace xterm entries with canonical ones from XFree86 3.2.
24936 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
24937 # * Added color_xterm from Jacob Mandelson
24938 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
24939 # * Back off the xterm entry to use r6 as a base.
24940 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
24941 # * Added dec-vt220 at Adrian Garside's request.
24943 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
24945 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
24946 # * Minor corrections to xterm entries.
24947 # * Replaced EWAN telnet entry.
24948 # * Dropped the reorder script generator. It was a fossil.
24949 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24950 # * Replaced minitel-2 entry.
24951 # * Added MGR, ansi-nt.
24952 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24953 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24954 # the 4.4BSD Lite2 file.
24956 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
24957 # * Use setaf/setab consistently with SVr4.
24958 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
24959 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
24960 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
24961 # * add xterm-16color, for XFree86 3.3
24962 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
24963 # * correct typo in emu
24964 # * correct typo in vt102-w (Robert Wuest)
24965 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
24966 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
24967 # * remove ech capability from rxvt (it does the wrong thing)
24968 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
24969 # * remove spurious newlines from several entries (hp+color, wy50,
24970 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
24972 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
24973 # * correct rmso capability of wy50-mc
24974 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
24975 # * add cbt to xterm-xf86-v32
24976 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
24977 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
24978 # other capabilities not in xterm-r6.
24979 # * remove alternate character set from kterm entry.
24980 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
24981 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
24982 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
24983 # * add xterm-8bit entry.
24984 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
24985 # * repair several places where early version of tic replaced \, with \\\,
24986 # * make acsc entries canonical form (sorted, uniq).
24987 # * modify acsc entries for linux, linux-koi8
24988 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
24989 # * add color, mouse support to kterm.
24990 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
24991 # * correct wy120 smxon/tbc capabilities which were stuck together.
24992 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
24993 # * add entry for xterm-xf86-v39t
24994 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
24995 # * add u8,u9 to sun-il description
24996 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
24997 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
24999 # * add hds200 description (Walter Skorski)
25000 # * add EMX 0.9b descriptions
25001 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
25002 # * rename xhpterm back to hpterm.
25003 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
25004 # * change initc in linux-c-nc to use 0..1000 range.
25005 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
25006 # * remove hpa/vpa from rxvt, which implements them incorrectly.
25007 # * add sgr0 for rxvt.
25008 # * remove bogus smacs/rmacs from EMX descriptions.
25009 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
25010 # * revised entry for att7300
25011 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
25012 # * use \0 rather than \200.
25013 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
25014 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
25015 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
25016 # * rename xterm-xf86-v39t to xterm-xf86-v40
25017 # * remove bold/underline from sun console entries since they're not
25019 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
25020 # * add beterm entry (Fred Fish)
25021 # * add irix-color/xwsh entry.
25022 # * turn ncv off for linux.
25023 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
25024 # * set ncv for FreeBSD console (treat colors with reverse specially).
25025 # * remove sgr string from qnx based on report by Xiaodan Tang
25026 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
25027 # * remove spurious commas from descriptions
25028 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
25029 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
25030 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25031 # apparently based on cp-866).
25033 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
25035 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
25036 # * Replaced minitel-2 entry.
25037 # * Added MGR, ansi-nt.
25038 # * Minor corrections to xterm entries.
25039 # * Replaced EWAN telnet entry.
25040 # * Dropped the reorder script generator. It was a fossil.
25041 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
25042 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
25043 # the 4.4BSD Lite2 file.
25044 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
25045 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
25046 # * Updated iris-ansi; corrected vt102-w.
25047 # * Switch base xterm entry to 3.3 level.
25048 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
25050 # * Removed rmir/smir from tv92B.
25052 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
25053 # * add hds200 description (Walter Skorski)
25054 # * add beterm entry (Fred Fish)
25055 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
25056 # iris-color entries.
25057 # * add emx entries.
25058 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
25059 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
25061 # * remove sgr string from qnx based on report by Xiaodan Tang
25062 # * Added u8/u9, removed rmul/smul from sun-il.
25063 # * 4.2 tic displays \0 rather than \200.
25064 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
25065 # apparently based on cp-866).
25066 # * Merged in Pavel Roskin's acsc for linux-koi8
25067 # * Corrected some erroneous \\'s to \.
25068 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
25069 # * II -> ii in pcvtXX, screen, xterm.
25070 # * Removed \n chars following ANSI escapes in sgr & friends.
25071 # * Updated Wyse entries.
25072 # * h19 corrections from Tim Pierce.
25073 # * Noted that the dm2500 has both ich and smir.
25074 # * added pccons for the Alpha under OSF/1.
25075 # * Added Sony NEWS workstation entries and cit101e-rv.
25076 # * Reverted `amiga'; to Kent Polk's version, as I'm told
25077 # the Verkuil entry messes up with Amiga Telnet.
25078 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
25079 # * Corrected attributions in 10.2.0 release notes.
25080 # * Scanned the Shuford archive for new terminfos and information.
25081 # * Removed sgr from qnx entry (Thomas Dickey).
25082 # * Added entries for ICL and Kokusai Data Systems terminals.
25083 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
25084 # * Incorporated att700 from the Boundless Technology FTP site.
25085 # * Miscellaneous contact-address and Web-page updates.
25087 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
25090 # * add nxterm and xterm-color terminfo description (request by Cristian
25091 # Gafton <gafton@redhat.com>).
25092 # * modify rxvt terminfo description to clear alternate screen before
25093 # switching back to normal screen, for compatibility with applications
25094 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
25095 # * modify linux terminfo description to reset color palette (reported
25096 # by Telford Tendys <telford@eng.uts.edu.au>).
25099 # * merge changes from current XFree86 xterm terminfo descriptions.
25102 # * Added minitel1 entries from Alexander Montaron.
25103 # * Added qnxt2 from Federico Bianchi.
25104 # * Added arm100 terminfo entries from Dave Millen.
25107 # * Added ncsa telnet entries from Francesco Potorti
25110 # * modify ncsa telnet entry to reflect color, other capabilities based on
25111 # examination of the source code - T.Dickey.
25114 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
25117 # * Added Francesco Potorti's tuned Wyse 99 entries.
25118 # * dtterm enacs correction from Alexander V. Lukyanov.
25119 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
25120 # * correct a typo in icl6404 entry.
25121 # * add xtermm and xtermc
25124 # * format most %'char' sequences to %{number}
25125 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
25126 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
25129 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
25130 # * correct initialization string in xterm-r5, add misc other features
25131 # to correspond with xterm patch #84 - TD
25134 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
25135 # * add Mathew Vernon's mach console entries
25136 # * corrections for ncsa function-keys (report by Larry Virden)
25139 # * change linux to use ncv#2, since underline does not work with color - TD
25142 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
25143 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
25144 # application modes, change kent to use the correct keypad code - TD
25147 # * add entry for Tera Term - TD
25150 # * minor improvements for teraterm entry - TD
25151 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
25152 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
25155 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
25156 # xterm and ncsa entries by removing the unneeded ones. Note that
25157 # some entries will return kend & khome versus kslt and kfnd, for
25158 # PC-style keyboards versus strict vt220 compatibility - TD
25161 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
25163 # * add 'crt' entry - TD
25164 # * correct typos in 'linux-c' entry - TD
25167 # * update entries for BSD/OS console to use klone+sgr and klone+color
25168 # (Jeffrey C Honig)
25171 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
25174 # * add linux-lat, from RedHat patches to ncurses 4.2
25177 # * add complete set of default function-key definitions for scoansi - TD.
25180 # * add cnorm, cvvis for Linux 2.2 kernels
25183 # * add kmous to xterm-r5 -TD
25184 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
25185 # parent "use" clause -TD
25188 # * corrected cnorm, added el1 in 'screen' description -TD
25191 # * add ms-vt100 -TD
25194 # * corrections to beterm entry -TD
25197 # * add cygwin entry -TD
25200 # * minor corrections for beterm entry -TD
25203 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
25206 # * add amiga-8bit entry
25207 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
25208 # rcons-color, based on
25209 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
25210 # * add alias for iris-ansi-net
25213 # * corrected scoansi entry's acsc, some function keys, add color -TD
25216 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
25217 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
25218 # key mapping, leaving Potorti's entries more like he named them -TD
25219 # * remove enter/exit am-mode from cygwin -TD
25222 # * correct typos in several entries (missing '[' from CSI):
25223 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
25224 # strings for avt-ns -TD
25225 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
25228 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
25229 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
25230 # * add xterm-88color and xterm-256color -TD
25233 # * add "obsolete" termcap strings -TD
25234 # * add kvt and gnome entries -TD
25237 # * correct cup string for regent100 -TD
25240 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
25241 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
25242 # * change OTrs capabilities to rs2 -TD
25243 # * add obsolete and extended capabilities to 'screen' -TD
25246 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
25248 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
25249 # and adding kcbt -TD
25252 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
25253 # nonstandard resource settings -TD
25256 # * minor fixes for xterm-*, based on Debian #58530 -TD
25259 # * add several terminal types from esr's "11.0", as well as comments.
25260 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
25261 # vt220-8bit, vt220-old, wy85-8bit
25264 # * add several terminal types from esr's "11.0.1" (ansi-*).
25265 # * update OTxx capabilities for changes on 2000/3/4.
25266 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
25269 # * move screen's AX extension to ecma+color, modify several entries to
25270 # use that, adjusting ncv as needed -TD
25273 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
25274 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
25275 # in esr's version.
25278 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
25279 # * correct color definition for ibm3164, make minor changes to other
25280 # IBM terminal definitions based on recent terminfo descriptions -TD
25283 # * add mgterm, from NetBSD -TD
25284 # * add alias sun-cgsix for sun-ss5 as per NetBSD
25285 # * change cons25w to use rs2 for reset rather than rs1 -TD
25286 # * add rc/sc to aixterm based on manpage -TD
25289 # * remove ncv from xterm-16color, xterm-256color
25292 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
25295 # * add Eterm (Michael Jennings)
25298 # * add amiga-vnc entry.
25301 # * correct description of Top Gun Telnet.
25302 # * add kterm-color
25305 # * add qansi* entries from QNX ftp site.
25308 # * add Matrix Orbital entries by Eric Z. Ayers).
25309 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
25313 # * add S0, E0 extensions to screen's entry -TD
25316 # * several corrections based on tic's new parameter-checking code -TD
25317 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
25318 # bracketing sequences that reset video attributes (\E8 would restore
25322 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
25325 # * improved scoansi, based on SCO man-page, and testing console,
25326 # scoterm with tack -TD
25329 # * modify kterm to use acsc via SCS controls.
25332 # * screen 3.9.8 allows xterm mouse controls to pass-through
25335 # * remove spurious "%|" from some xterm entries.
25338 # * modify 'screen' khome/kend to match screen 3.09.08
25339 # * add examples of 'screen' customization (screen.xterm-xfree86,
25340 # screen.xterm-r6, screen.teraterm) -TD
25343 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
25344 # * add "Apple_Terminal" entries -Benjamin Sittler
25345 # * remove time-delays from "Apple_Terminal" entries -TD
25346 # * make sgr entries time-delays consistent with individual caps -TD
25349 # * corrected/updated screen.xterm-xfree86
25352 # * ELKS descriptions, from Federico Bianchi
25353 # * add u6 (CSR) to Eterm (Michael Jennings).
25356 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
25357 # tic which handles names no longer than 14 characters. Add
25358 # corresponding descriptions for the Darwin PowerPC console named
25359 # "xnuppc" -Benjamin Sittler
25362 # * change kbs in mach entries to ^? (Marcus Brinkmann).
25365 # * add "putty" entry -TD
25366 # * updated "Apple_Terminal" entries -Benjamin Sittler
25369 # * add ms-vt100-color entry -TD
25370 # * add "konsole" entries -TD
25373 # * update gnome entry to Redhat 7.2 -TD
25376 # * add kf13-kf48 strings to cons25w -TD
25377 # * add pcvt25-color entry -TD
25378 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
25379 # * improve some features of scoansi entry based on SCO's version -TD
25380 # * add scoansi-new entry corresponding to OpenServer 5.0.6
25383 # * add kcbt to screen entry -TD
25386 # * add rxvt-16color, ibm+16color, mvterm entries -TD
25389 # * split out linux-basic entry, making linux-c inherit from that, and
25390 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
25391 # the history of this console type -TD
25392 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
25393 # r/g/b parameters of initc are in the range 0 to 1000 -TD
25396 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
25399 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
25400 # in the latter -TD
25403 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
25404 # * ncr260wy350pp has only 16 color pairs -TD
25405 # * add sun-type4 from NetBSD -TD
25406 # * update xterm-xfree86 to current (xterm patch #170) -TD
25407 # * add screen-bce, screen-s entries -TD
25408 # * add xterm-1002, xterm-1003 entries -TD
25411 # * update homepage for Top Gun Telnet/SSH
25414 # * reduce duplication in emx entries, added emx-base -TD
25417 # * corrected acs for screen.teraterm -TD
25418 # * add tkterm entry -TD
25421 # * cygwin changes from Charles Wilson:
25422 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
25423 # primary instead of nxterm, to match XFree86's xterm.terminfo
25424 # usage and to prevent circular links.
25425 # (rxvt): add additional codes from rxvt.org.
25426 # (rxvt-color): new alias
25427 # (rxvt-xpm): new alias
25428 # (rxvt-cygwin): like rxvt, but with special acsc codes.
25429 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
25430 # with a "native" MSWin GUI. Each takes different acsc codes,
25431 # which are both different from the "normal" rxvt's acsc.
25432 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
25433 # (cygwinDBG): ditto.
25436 # * update gnome terminal entries -TD
25439 # * add entries for djgpp 2.03 and 2.04 -TD
25442 # * add alias for vtnt -TD
25443 # * update xterm-xfree86 for XFree86 4.4 -TD
25446 # * add linux-vt (Andrey V Lukyanov)
25449 # * add screen.linux -TD
25452 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
25455 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
25456 # * add vt100+ and vt-utf8 entries -TD
25457 # * add uwin entry -TD
25460 # * add sgr strings to several common entries lacking them, e.g.,
25461 # screen, to make the entries more portable -TD
25462 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
25463 # * similar fixups for cvvis/cnorm various entries -TD
25466 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
25470 # * add xterm-xf86-v44 -TD
25471 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
25472 # on G1 being used via an ISO-2022 escape sequence (report by
25473 # Juliusz Chroboczek) -TD
25474 # * add 'hurd' entry -TD
25477 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
25479 # * align with xterm #192's use of xterm-new -TD
25480 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
25481 # * make xterm-new the default "xterm" -TD
25484 # * minor fixes for emu -TD
25486 # * add rmam/smam to linux (Trevor Van Bremen)
25487 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
25488 # * fixes for avatar0 -TD
25489 # * fixes for vp3a+ -TD
25492 # * add xterm-pc-fkeys -TD
25493 # * review/update gnome and gnome-rh90 entries (prompted by
25494 # Redhat Bugzilla #122815) -TD
25495 # * review/update konsole entries -TD
25496 # * add sgr, correct sgr0 for kterm and mlterm -TD
25497 # * correct tsl string in kterm -TD
25500 # * make ncsa-m rmacs/smacs consistent with sgr -TD
25501 # * add sgr, rc/sc and ech to syscons entries -TD
25502 # * add function-keys to decansi -TD
25503 # * add sgr to mterm-ansi -TD
25504 # * add sgr, civis, cnorm to emu -TD
25505 # * correct/simplify cup in addrinfo -TD
25506 # * corrections for gnome and konsole entries
25507 # (Redhat Bugzilla #122815) -Hans de Goede
25508 # * modify DEC entries (vt220, etc), to add sgr string, and to use
25509 # ISO-2022 strings for rmacs/smacs -TD
25512 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
25515 # * improved putty entry -Robert de Bath
25518 # * remove dch/dch1 from rxvt because they are implemented inconsistently
25519 # with the common usage of bce/ech -TD
25520 # * remove khome from vt220 (vt220's have no home key) -TD
25521 # * add rxvt+pcfkeys -TD
25524 # * modify several entries to ensure xterm mouse and cursor visibility
25525 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
25526 # Eterm, screen. (The xterm entries are left alone - old ones for
25527 # compatibility, and the new ones do not require this change) -TD
25530 # * add morphos entry -Pavel Fedin
25531 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
25532 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
25535 # * update wsvt25 entry -TD
25538 # * update pairs for xterm-88color and xterm-256color to reflect the
25539 # ncurses extended-color support -TD
25542 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
25543 # * add aixterm-16color to demonstrate 16-color capability -TD
25546 # * add media-copy to vt100 -TD
25547 # * corrected acsc string for vt52 -TD
25550 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
25552 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
25555 # * re-corrected acsc string for vt52 -TD
25558 # * corrected sun-il sgr string which referred to bold and underline -TD
25559 # * add sun-color entry -TD
25562 # * modify sgr0 in several entries to reset alternate-charset as in the
25564 # * modify sgr string of prism9 to better match the individual
25568 # * correct order of use= in rxvt-basic -TD
25571 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
25574 # * other minor fixes to cygwin based on tack -TD
25575 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
25578 # * add nsterm-16color entry -TD
25579 # * remove ncv flag from xterm-16color -TD
25580 # * remove setf/setb from xterm-256color to match xterm #209 -TD
25581 # * update mlterm entry to 2.9.2 -TD
25584 # * fixes to make nsterm-16color match report
25585 # by Christian Ebert -Alain Bench
25588 # * add xterm+256color building block -TD
25589 # * add gnome-256color, putty-256color, rxvt-256color -TD
25592 # * add hpterm-color -TD
25595 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
25596 # * add gnome-fc5 (prompted by GenToo #122566) -TD
25597 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
25598 # * improve xterm-256color by combining the ibm+16color setaf/setab
25599 # strings with SGR 48. The setf/setb strings also are cancelled here
25600 # rather than omitted so derived entries will cancel those also -Alain
25604 # * add some notes regarding copyright to terminfo.src -TD
25605 # * use rxvt+pcfkeys in Eterm -TD
25606 # * remove km and flash from gnome, Eterm and rxvt since they do not work
25607 # as one would expect (km sends ESC rather than setting the 8th bit
25609 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
25610 # * add konsole-solaris -TD
25613 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
25614 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
25615 # * modify xterm-24 to inherit from "xterm" -TD
25616 # * add xiterm entry -TD
25617 # * add putty-vt100 entry -TD
25618 # * corrected spelling of Michael A Dorman's name, prompted by
25619 # http://www.advogato.org/person/mdorman/diary.html -TD
25622 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
25623 # * update xterm+pcfkeys to match xterm #216 -TD
25626 # * make descriptions of xterm entries consistent with its terminfo -TD
25629 # * add xfce, mgt -TD
25632 # * correct acsc string in kterm -TD
25635 # * add kon entry -TD
25636 # * remove invis from linux and related entries, add klone+sgr8 for those
25637 # that implement the feature (or have not been shown to lack it) -TD
25640 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
25641 # * minor improvements to rxvt+pcfkeys -TD
25644 # * fix a few typos in if/then/else expressions -TD
25647 # * add several GNU Screen variations with 16- and 256-colors, and
25648 # status line (Alain Bench).
25651 # * add Newbury Data entries (Jean-Charles Billaud).
25654 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
25657 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
25658 # * add konsole-256color entry -TD
25661 # * add 9term entry (request by Juhapekka Tolvanen) -TD
25664 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
25665 # * add shift-control- and control-modified keys for rxvt editing
25667 # * update mlterm entry to 2.9.3 -TD
25668 # * add mlterm+pcfkeys -TD
25671 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
25672 # xterm+pcc0, etc., to make the corresponding building blocks reflect
25673 # xterm's capabilities -TD
25674 # * add mrxvt entry -TD
25675 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
25678 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
25681 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
25682 # xterm starting with xterm patch #216 -TD
25683 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
25684 # to match xterm #230 -TD
25685 # * extend xterm+pccX entries to match xterm #230 -TD
25686 # * add xterm+app, xterm+noapp, from xterm #230 -TD
25687 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
25690 # * add screen.rxvt -TD
25693 # * add screen+fkeys (prompted by Debian #478094) -TD
25696 # * add screen.mlterm -TD
25697 # * improve mlterm and mlterm+pcfkeys -TD
25700 # * add Eterm-256color, Eterm-88color -TD
25701 # * add rxvt-88color -TD
25704 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
25705 # original to teraterm2.3 -TD
25706 # * update "gnome" to 2.22.3 -TD
25707 # * update "konsole" to 1.6.6 -TD
25708 # * add "aterm" -TD
25709 # * add "linux2.6.26" -TD
25712 # * change several \E[2g (clear tab at current column) to \E[3g
25713 # (clear all tabs) to match definition for tbc capability -TD
25716 # * add eterm-color -TD
25719 # * add screen.Eterm -TD
25722 # * correct typo in pfkey of ansi.sys-old
25723 # (report by Kalle Olavi Niemitalo)
25724 # * move function- and cursor-keys from emx-base to ansi.sys, and create
25725 # a pfkey capability which handles F1-F48 -TD
25728 # * add vwmterm entry (Bryan Christ)
25731 # * change ncv and op capabilities in sun-color to match Sun's entry for
25732 # this (report by Laszlo Peter)
25733 # * improve interix smso by using reverse rather than bold (report by
25734 # Kristof Zelechovski).
25737 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
25738 # * add linux-16color (Benjamin Sittler)
25739 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
25740 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
25741 # * add ccc and initc capabilities to xterm-16color -TD
25744 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
25747 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
25750 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
25751 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
25754 # * add bterm (bogl 0.1.18) -TD
25755 # * minor fix to rxvt+pcfkeys -TD
25758 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
25761 # * add several screen-bce.XXX entries -TD
25764 # * modify screen-bce.XXX entries to exclude ech, since screen's color
25765 # model does not clear with color for that feature -TD
25768 # * rename atari and st52 to atari-old, st52-old, use newer entries from
25769 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
25772 # * add mlterm-256color entry -TD
25775 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
25776 # the alternate character set (patch by Nicholas Marriott)
25779 # * improve acsc for vt52 (Benjamin Sittler)
25780 # * modify nsterm entries for consistent sgr/sgr0 -TD
25781 # * modify xnuppc entries for consistent sgr/sgr0 -TD
25782 # * add invis to tek4115 sgr -TD
25785 # * reformat acsc strings to canonical format -TD
25788 # * add "XT" capability to entries for terminals that support both
25789 # xterm-style mouse- and title-controls, for "screen" which
25790 # special-cases TERM beginning with "xterm" or "rxvt" -TD
25793 # * fill in no-parameter forms of cursor-movement where a parameterized
25794 # form is available -TD
25795 # * fill in missing cursor controls where the form of the controls is
25797 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
25800 # * correct comparison used for setting 16-colors in linux-16color
25801 # entry (Novell #644831) -TD
25802 # * improve linux-16color entry, using "dim" for color-8 which makes it
25803 # gray rather than black like color-0 -TD
25806 # * make "vte" the principal entry defining "gnome", since GNOME terminal
25807 # is merely one of several terminals whose behavior is provided by this
25811 # * fix typo in rmso for tek4106 -Goran Weinholt
25814 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
25815 # * also suppress ncv in konsole-base -TD
25818 # * add U8 feature to denote entries for terminal emulators which do not
25819 # support VT100 SI/SO when processing UTF-8 encoding -TD
25820 # * add xterm-utf8 as a demo of the U8 feature -TD
25823 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
25826 # * update minix entry to minix 3.2 (Thomas Cort).
25829 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
25830 # * remove a backslash which continued comment, obscuring altos3
25831 # definition with OpenBSD toolset (Nicholas Marriott).
25834 # * add/use xterm+tmux chunk from xterm #271 -TD
25835 # * resync xterm-new entry from xterm #271 -TD
25836 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
25837 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
25838 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
25841 # * add kich1 to sun (Yuri Pankov)
25842 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
25845 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
25848 # * minor cleanup of X-terminal emulator section -TD
25849 # * add terminator entry -TD
25850 # * add simpleterm entry -TD
25853 # * add xterm+kbs fragment from xterm #272 -TD
25856 # * add pccon entries for OpenBSD console (Alexei Malinin)
25859 # * corrected old changelog comments -TD
25862 # * add putty-sco -TD
25865 # * add mach-gnu (Samuel Thibault)
25866 # * add mach-gnu-color, tweaks to mach-gnu -TD
25867 # * make sgr for sun-color agree with smso -TD
25868 # * make sgr for prism9 agree with other caps -TD
25869 # * make sgr for icl6404 agree with other caps -TD
25870 # * make sgr for ofcons agree with other caps -TD
25871 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
25872 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
25873 # * make sgr for avt-ns agree with other caps -TD
25876 # * make sgr for xterm-pcolor agree with other caps -TD
25877 # * make sgr for att5425 agree with other caps -TD
25878 # * make sgr for att630 agree with other caps -TD
25879 # * make sgr for linux entries agree with other caps -TD
25880 # * make sgr for tvi9065 agree with other caps -TD
25881 # * make sgr for ncr260vt200an agree with other caps -TD
25882 # * make sgr for ncr160vt100pp agree with other caps -TD
25883 # * make sgr for ncr260vt300an agree with other caps -TD
25884 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
25885 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
25888 # * correct order of use-clauses in st-256color -TD
25891 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
25894 # * document all of the user-defined capabilities in one place -TD
25895 # * add XT to some places to improve usefulness for other applications
25896 # than screen, which would like to pretend that xterm's title is
25897 # a status-line. -TD
25898 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
25899 # of ordering and overrides -TD
25902 # * add msgr to vt420, similar DEC vtXXX entries -TD
25903 # * add several missing vt420 capabilities from vt220 -TD
25904 # * factor out ansi+pp from several entries -TD
25905 # * change xterm+sl and xterm+sl-twm to include only the status-line
25906 # capabilities and not "use=xterm", making them more generally useful
25907 # as building-blocks -TD
25908 # * add dec+sl building block, as example -TD
25911 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
25912 # * add eslok flag to dec+sl -TD
25913 # * dec+sl applies to vt320 and up -TD
25914 # * drop wsl width from xterm+sl -TD
25915 # * reuse xterm+sl in putty and nsca-m -TD
25916 # * add ansi+tabs to vt520 -TD
25917 # * add ansi+enq to vt220-vt520 -TD
25920 # * remove p6 (bold) from opus3n1+ for consistency -TD
25921 # * remove acs stuff from env230 per clues in Ingres termcap -TD
25922 # * modify env230 sgr/sgr0 to match other capabilities -TD
25923 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
25924 # * make sgr for dku7202 agree with other caps -TD
25925 # * make sgr for ibmpc agree with other caps -TD
25926 # * make sgr for tek4107 agree with other caps -TD
25927 # * make sgr for ndr9500 agree with other caps -TD
25928 # * make sgr for sco-ansi agree with other caps -TD
25929 # * make sgr for d410 agree with other caps -TD
25930 # * make sgr for d210 agree with other caps -TD
25931 # * make sgr for d470c, d470c-7b agree with other caps -TD
25934 # * rewrite vt520 entry based on vt420 -TD
25935 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
25938 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
25939 # analysis by Martin Husemann).
25940 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
25941 # Onno van der Linden).
25942 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
25943 # * add kdch1, etc., to qvt108 -TD
25944 # * add dl1/il1 to some entries based on dl/il values -TD
25945 # * add dl to simpleterm -TD
25948 # * modify some older xterm entries to align with xterm source -TD
25949 # * separate "xterm-old" alias from "xterm-r6" -TD
25952 # * add E3 to xterm-basic and putty -TD
25955 # * add nsterm-256color, make this the default nsterm -TD
25956 # * remove bw from nsterm-bce, per testing with tack -TD
25959 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
25960 # (patch by Christian Persch).
25963 # * reviewed vte-2012, reverted most of the change since it was incorrect
25964 # based on testing with tack -TD
25965 # * un-cancel the initc in vte-256color, since this was implemented
25966 # starting with version 0.20 in 2009 -TD
25969 # * correct typo in sgr string for sun-color,
25970 # add bold for consistency with sgr,
25971 # change smso for consistency with sgr -TD
25972 # * correct typo in sgr string for terminator -TD
25973 # * add blink to the attributes masked by ncv in linux-16color (report
25974 # by Benjamin Sittler)
25977 # * change initialization for vt220, similar entries for consistency
25978 # with cursor-key strings (NetBSD #47674) -TD
25979 # * further improvements to linux-16color (Benjamin Sittler)
25982 # * move nsterm-related entries out of "obsolete" section to more
25983 # plausible "ansi consoles" -TD
25984 # * additional cleanup of table-of-contents by reordering -TD
25987 # * added note to clarify Terminal.app's non-emulation of the various
25988 # terminal types listed in the preferences dialog -TD
25991 # * use TS extension to describe xterm's title-escapes -TD
25992 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
25993 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
25994 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
25995 # (Debian #727119).
25996 # * simplify pfkey expression in ansi.sys -TD
25999 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
26002 # * updated notes for wsvt25 based on tack and vttest -TD
26003 # * add teken entry to show actual properties of FreeBSD's "xterm"
26007 # * add terminology entry -TD
26008 # * add mlterm3 entry, use that as "mlterm" -TD
26009 # * inherit mlterm-256color from mlterm -TD
26012 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
26015 # * cancel ccc in putty-256color and konsole-256color for consistency
26016 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
26017 # * add xterm+256setaf building block for various terminals which only
26018 # get the 256-color feature half-implemented -TD
26019 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
26023 # * add vt520ansi (Mike Gran)
26026 # * correct several entries which had termcap-style padding used in
26027 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
26028 # * correct syntax for padding in some entries: dg211, h19 -TD
26029 # * correct ti924-8 which had confused padding versus octal escapes -TD
26030 # * correct padding in sbi entry -TD
26033 # * update xterm-new to xterm patch #305 -TD
26034 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
26035 # (italic). This was a long-ago typo in screen 3.1.1 which was
26036 # overlooked until a few terminal emulators implemented the feature -TD
26039 # > fix regression in screen terminfo entries (reports by Christian
26040 # Ebert, Gabriele Balducci) -TD
26041 # + revert the change to screen; see notes for why this did not work -TD
26042 # + cancel sitm/ritm for entries which extend "screen", to work around
26043 # screen's hardcoded behavior for SGR 3 -TD
26046 # + modify sgr for screen.xterm-new to support dim capability -TD
26047 # + add dim capability to nsterm+7 -TD
26048 # + cancel dim capability for iterm -TD
26049 # + add dim, invis capabilities to vte-2012 -TD
26050 # + add sitm/ritm to konsole-base and mlterm3 -TD
26053 # + add xterm-1005 and xterm-1006 entries, with suggested extension
26054 # capability "xm" -TD
26057 # + update test-report for mrxvt -TD
26060 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
26063 # + reviewed terminology 0.6.1, add function key definitions. None of
26064 # the vt100-compatibility issues were improved -TD
26067 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
26068 # + add several key definitions to nsterm-bce to match preconfigured
26069 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
26072 # + remove unnecessary ';' from E3 capabilities -TD
26073 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
26074 # + split-out recent change to nsterm-bce as nsterm-build326, and add
26075 # nsterm-build342 to reflect changes with successive releases of OSX
26076 # (discussion with Leonardo B Schenkel)
26077 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
26081 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
26082 # + add several screen.XXX entries to support the respective variations
26083 # for 256 colors -TD
26086 # + add putty+fnkeys* building-block entries -TD
26089 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
26090 # + add vte-2014, update vte to use that -TD
26093 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
26094 # from xterm-new (report by Richard Birkett) -TD
26097 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
26098 # + fixes for st 0.5 from testing with tack -TD
26101 # + updated minitel entries to fix kel problem with emacs, and add
26102 # minitel1b-nb (Alexandre Montaron).
26103 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
26104 # + replace some dead URLs in commands with equivalents from the
26105 # Internet Archive -TD
26108 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
26109 # + add keys f12-f124 to pccon+keys (Tati Chevron).
26112 # + fix some inconsistencies in the pccon* entries -TD
26115 # + add viewdata (Alexandre Montaron).
26118 # + tidy up comments about hardcoded 256color palette (report by
26119 # Leonardo Brondani Schenkel) -TD
26120 # + add putty-noapp entry, and amend putty entry to use application mode
26121 # for better consistency with xterm (report by Leonardo Brondani
26125 # + add 'oc' capability to xterm+256color, allowing palette reset for
26129 # + modify linux2.6 entry to improve line-drawing -TD
26130 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
26133 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
26134 # reset palette using "oc" string as in linux -TD
26137 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
26138 # that could be returned -TD
26139 # + added a few capabilities fixed in recent vte -TD
26142 # + correct a typo in interix -TD
26145 # + updated minitel entries to use status line with screen(1), as well as
26146 # printing special G2 videotex chars like french accentuated glyph
26147 # using special cap XC= (patch by Alexandre Montaron).
26150 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
26151 # + correct rs2 string for vt100-nam -TD
26154 # + modify linux-16color to not mask dim, standout or reverse with the
26155 # ncv capability -TD
26156 # + add 0.1sec mandatory delay to flash capabilities using the VT100
26157 # reverse-video control -TD
26158 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
26159 # entry, to avoid conflict with the user-defined mapping. The reset
26160 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
26163 # + merge current st description (report by Harry Gindi) -TD
26166 # + modify flash capability for linux and wyse entries to put the delay
26167 # between the reverse/normal escapes rather than after -TD
26170 # + minor comment-fixes to help automate links to bug-urls -TD
26171 # + add dvtm, dvtm-256color -TD
26172 # + add settings corresponding to xterm-keys option to tmux entry to
26173 # reflect upcoming change to make that option "on" by default
26174 # (patch by Nicholas Marriott).
26175 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
26176 # + add dumb-emacs-ansi -TD
26179 # + correct a few spelling errors in comments -TD
26183 # + add vt100+4bsd building block, use that for older terminals rather
26184 # than "vt100" which is now mostly used as a building block for
26185 # terminal emulators -TD
26186 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
26187 # (report/analysis by Robert King) -TD
26190 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
26191 # + add smso for env230, to match sgr -TD
26192 # + remove p7/protect from sgr in fbterm -TD
26193 # + drop setf/setb from fbterm; setaf/setab are enough -TD
26194 # + make xterm-pcolor sgr consistent with other capabilities -TD
26195 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
26196 # (discussion with Nicholas Marriott)
26199 # + correct missing comma-separator between string capabilities in
26200 # icl6402 and m2-nam -TD
26201 # + update formatting with ncurses 6.0.20170422 -TD
26202 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
26203 # add alias ansiterm (report by Robert King).
26206 # + reformatted using hexadecimal numbers to improve readability -TD
26209 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
26210 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
26211 # + add "rep" to xterm-new, available since 1997/01/26 -TD
26212 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
26216 # + update "iterm" entry -TD
26217 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
26220 # + update notes on user-defined capabilities -TD
26223 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
26226 # + add "op" to xterm+256setaf -TD
26227 # + reviewed terminology 1.0.0 -TD
26228 # + reviewed st 0.7 -TD
26231 # + modify old terminology entry and a few other terminal emulators to
26232 # account for xon -TD
26233 # + correct sgr string for tmux, which used screen's "standout" code
26234 # rather than the standard code (patch by Roman Kagan)
26235 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
26236 # those correspond to the non-sgr settings where they differ, but
26237 # otherwise use ECMA-48 consistently:
26238 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
26239 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
26240 # st-0.7, vi603, vwmterm -TD
26243 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
26244 # blocks from xterm #331 -TD
26245 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
26247 # + modify xterm+256color and xterm+256setaf to use correct number of
26248 # color pairs, for ncurses 6.1 -TD
26249 # + add rs1 capability to xterm-256color -TD
26250 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
26251 # match xterm #272, reflecting packager's changes -TD
26252 # + remove "boolean" Se, Ss from st-0.7 -TD
26255 # + add konsole-direct and st-direct -TD
26256 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
26257 # direct-colors are wanted -TD
26260 # + add vte-direct -TD
26261 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
26265 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
26266 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
26267 # mode does not work with those programs. konsole is debatable -TD
26268 # + add "termite" entry (report by Markus Pfeiffer) -TD
26271 # + trim "XT" from screen entry -TD
26272 # + modify iterm to use xterm+sl-twm building block -TD
26273 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
26274 # konsole's removal in 2008 -TD
26275 # + expanded the history section of konsole to explain its flawed
26276 # imitation of xterm's keyboard -TD
26277 # + use xterm+x11mouse in screen.* entries because screen does not yet
26278 # support xterm's 1006 mode -TD
26279 # + add nsterm-build400 for macOS 10.13 -TD
26280 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
26281 # + update vte to vte-2017 -TD
26282 # + add ecma+strikeout to vte-2017 -TD
26283 # + add iterm2-direct -TD
26284 # + updated teraterm, added teraterm-256color -TD
26285 # + add mlterm-direct -TD
26286 # + add descriptions for ANSI building-blocks -TD
26289 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
26290 # + fix remaining flash capabilities with trailing mandatory delays -TD
26293 # + trim some redundant capabilities from st-0.7 -TD
26294 # + trim unnecessary setf/setb from interix -TD
26297 # + trim spurious whitespace from tmux in 2018-02-24 changes;
26298 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
26299 # (report by C Anthony Risinger)
26300 # + improve iterm2 using some xterm features which it has adapted -TD
26303 # + add acsc string to vi200 (Nibby Nebbulous)
26304 # add right/down-arrow to vi200's acsc -TD
26307 # + corrected acsc for wy50 -TD
26308 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
26309 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
26312 # + fix typo in tvi955 -TD
26313 # + corrected acsc for regent60 -TD
26314 # + add alias n7900 -TD
26317 # + corrected acsc for tvi950 -TD
26318 # + remove bogus kf0 from tvi950 -TD
26319 # + added function-key definitions to agree with Televideo 950 manual -TD
26320 # + add bel to tvi950 -TD
26321 # + add shifted function-keys to regent60 -TD
26322 # + renumber regent40 function-keys to match manual -TD
26323 # + add cd (clr_eos) to adds200 -TD
26326 # + add OpenGL clients alacritty and kitty -TD
26327 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
26330 # + fix a typo in comments (Aaron Gyes).
26331 # + add nsterm-build309 to replace nsterm-256color, assigning the latter
26332 # as an alias of nsterm, to make mouse work with nsterm-256color -TD
26333 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD
26336 # + add nsterm-direct -TD
26337 # + use SGR 1006 mouse for konsole-base -TD
26338 # + use SGR 1006 mouse for putty -TD
26339 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
26342 # + fix typo in adds200 -TD
26345 # + add "screen5", to mention italics (report by Stefan Assmann)
26346 # + modify description of xterm+x11hilite to eliminate unused p5 -TD
26349 # + update xterm-new to xterm patch #345 -TD
26350 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
26351 # + update terminator entry -TD
26352 # + remove hard-tabs from ti703 (report by Robert Clausecker)
26353 # + add Smol/Rmol for tmux, vte-2018 -Nicholas Marriott
26356 # + add rs1 to konsole, mlterm -TD
26359 # + add mintty, mintty-direct (Thomas Wolff)
26361 # + comment-out some user-defined capabilities in mintty+common to allow
26362 # builds with existing releases 5.9-6.1 -TD
26365 # + add ms-terminal -TD
26366 # + add vscode, vscode-direct -TD
26367 # + use ecma+index in screen, st -TD
26370 # + add domterm -TD
26371 # + improve comments for recent changes, add alias xterm.js -TD
26374 # + amend the change to screen, because tmux relies upon that entry
26375 # and does not support that feature (Debian #933572) -TD
26376 # + updated ms-terminal entry & notes -TD
26377 # + updated kitty entry & notes -TD
26378 # + updated alacritty+common entry & notes -TD
26379 # + use xterm+sl-twm for consistency -TD
26382 # + correct a comment -TD
26385 # + modify linux-16color to accommodate Linux console driver change in
26386 # early 2018 (report by Dino Petrucci).
26388 ######## SHANTIH! SHANTIH! SHANTIH!