+ if test $ac_cv_lib_nsl_gethostbyname = no; then
+ echo "$as_me:9743: checking for gethostbyname in -lbsd" >&5
+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbsd $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 9751 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main ()
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:9770: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:9773: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:9776: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:9779: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_bsd_gethostbyname=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_bsd_gethostbyname=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:9790: result: $ac_cv_lib_bsd_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
+if test $ac_cv_lib_bsd_gethostbyname = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
+fi
+
+ fi
+ fi
+
+ # lieder@skyler.mavd.honeywell.com says without -lsocket,
+ # socket/setsockopt and other routines are undefined under SCO ODT
+ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
+ # on later versions), says Simon Leinen: it contains gethostby*
+ # variants that don't use the nameserver (or something). -lsocket
+ # must be given before -lnsl if both are needed. We assume that
+ # if connect needs -lnsl, so does gethostbyname.
+ echo "$as_me:9806: checking for connect" >&5
+echo $ECHO_N "checking for connect... $ECHO_C" >&6
+if test "${ac_cv_func_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 9812 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect (); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect ();
+char (*f) ();
+
+int
+main ()
+{
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+f = connect; /* workaround for ICC 12.0.3 */ if (f == 0) return 1;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:9843: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:9846: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:9849: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:9852: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_connect=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:9862: result: $ac_cv_func_connect" >&5
+echo "${ECHO_T}$ac_cv_func_connect" >&6
+
+ if test $ac_cv_func_connect = no; then
+ echo "$as_me:9866: checking for connect in -lsocket" >&5
+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
+if test "${ac_cv_lib_socket_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 9874 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect ();
+int
+main ()
+{
+connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:9893: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:9896: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:9899: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:9902: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_socket_connect=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_socket_connect=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:9913: result: $ac_cv_lib_socket_connect" >&5
+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
+if test $ac_cv_lib_socket_connect = yes; then
+ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
+fi
+
+ fi
+
+ # Guillermo Gomez says -lposix is necessary on A/UX.
+ echo "$as_me:9922: checking for remove" >&5
+echo $ECHO_N "checking for remove... $ECHO_C" >&6
+if test "${ac_cv_func_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 9928 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char remove (); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove ();
+char (*f) ();
+
+int
+main ()
+{
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_remove) || defined (__stub___remove)
+choke me
+#else
+f = remove; /* workaround for ICC 12.0.3 */ if (f == 0) return 1;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:9959: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:9962: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:9965: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:9968: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_remove=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:9978: result: $ac_cv_func_remove" >&5
+echo "${ECHO_T}$ac_cv_func_remove" >&6
+
+ if test $ac_cv_func_remove = no; then
+ echo "$as_me:9982: checking for remove in -lposix" >&5
+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
+if test "${ac_cv_lib_posix_remove+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lposix $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 9990 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove ();
+int
+main ()
+{
+remove ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10009: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10012: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10015: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10018: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_posix_remove=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_posix_remove=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:10029: result: $ac_cv_lib_posix_remove" >&5
+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
+if test $ac_cv_lib_posix_remove = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+fi
+
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ echo "$as_me:10038: checking for shmat" >&5
+echo $ECHO_N "checking for shmat... $ECHO_C" >&6
+if test "${ac_cv_func_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10044 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shmat (); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat ();
+char (*f) ();
+
+int
+main ()
+{
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shmat) || defined (__stub___shmat)
+choke me
+#else
+f = shmat; /* workaround for ICC 12.0.3 */ if (f == 0) return 1;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10075: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10078: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10081: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10084: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_shmat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:10094: result: $ac_cv_func_shmat" >&5
+echo "${ECHO_T}$ac_cv_func_shmat" >&6
+
+ if test $ac_cv_func_shmat = no; then
+ echo "$as_me:10098: checking for shmat in -lipc" >&5
+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
+if test "${ac_cv_lib_ipc_shmat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lipc $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 10106 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat ();
+int
+main ()
+{
+shmat ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10125: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10128: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10131: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10134: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_ipc_shmat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_ipc_shmat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:10145: result: $ac_cv_lib_ipc_shmat" >&5
+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
+if test $ac_cv_lib_ipc_shmat = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+fi
+
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+ ac_save_LDFLAGS=$LDFLAGS
+ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # John Interrante, Karl Berry
+ echo "$as_me:10163: checking for IceConnectionNumber in -lICE" >&5
+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 10171 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber ();
+int
+main ()
+{
+IceConnectionNumber ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10190: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10193: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10196: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10199: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_ICE_IceConnectionNumber=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_ICE_IceConnectionNumber=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:10210: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
+if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+fi
+
+ LDFLAGS=$ac_save_LDFLAGS
+
+fi
+
+cf_x_athena=${cf_x_athena:-Xaw}
+
+echo "$as_me:10222: checking if you want to link with Xaw 3d library" >&5
+echo $ECHO_N "checking if you want to link with Xaw 3d library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-Xaw3d or --without-Xaw3d was given.
+if test "${with_Xaw3d+set}" = set; then
+ withval="$with_Xaw3d"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=Xaw3d
+ echo "$as_me:10233: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:10236: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:10240: checking if you want to link with Xaw 3d xft library" >&5
+echo $ECHO_N "checking if you want to link with Xaw 3d xft library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-Xaw3dxft or --without-Xaw3dxft was given.
+if test "${with_Xaw3dxft+set}" = set; then
+ withval="$with_Xaw3dxft"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=Xaw3dxft
+ echo "$as_me:10251: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:10254: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:10258: checking if you want to link with neXT Athena library" >&5
+echo $ECHO_N "checking if you want to link with neXT Athena library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-neXtaw or --without-neXtaw was given.
+if test "${with_neXtaw+set}" = set; then
+ withval="$with_neXtaw"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=neXtaw
+ echo "$as_me:10269: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:10272: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+echo "$as_me:10276: checking if you want to link with Athena-Plus library" >&5
+echo $ECHO_N "checking if you want to link with Athena-Plus library... $ECHO_C" >&6
+withval=
+
+# Check whether --with-XawPlus or --without-XawPlus was given.
+if test "${with_XawPlus+set}" = set; then
+ withval="$with_XawPlus"
+
+fi;
+if test "$withval" = yes ; then
+ cf_x_athena=XawPlus
+ echo "$as_me:10287: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:10290: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+cf_x_athena_lib=""
+
+if test "$PKG_CONFIG" != none ; then
+ cf_athena_list=
+ test "$cf_x_athena" = Xaw && cf_athena_list="xaw8 xaw7 xaw6"
+ for cf_athena_pkg in \
+ $cf_athena_list \
+ ${cf_x_athena} \
+ ${cf_x_athena}-devel \
+ lib${cf_x_athena} \
+ lib${cf_x_athena}-devel
+ do
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists $cf_athena_pkg; then
+ test -n "$verbose" && echo " found package $cf_athena_pkg" 1>&6
+
+echo "${as_me:-configure}:10310: testing found package $cf_athena_pkg ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags $cf_athena_pkg 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs $cf_athena_pkg 2>/dev/null`"
+ test -n "$verbose" && echo " package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:10316: testing package $cf_athena_pkg CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package $cf_athena_pkg LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:10320: testing package $cf_athena_pkg LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ cf_x_athena_lib="$cf_pkgconfig_libs"
+
+cf_x_athena_LIBS=`echo "HAVE_LIB_$cf_x_athena" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
+
+ cat >>confdefs.h <<EOF
+#define $cf_x_athena_LIBS 1
+EOF
+
+ for cf_trim_lib in Xmu Xt X11
+ do
+ case "$LIBS" in
+ (*-l$cf_trim_lib\ *-l$cf_trim_lib*)
+ LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'`
+ test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6
+
+echo "${as_me:-configure}:10431: testing ..trimmed $LIBS ..." 1>&5
+
+ ;;
+ esac
+ done
+
+echo "$as_me:10437: checking for usable $cf_x_athena/Xmu package" >&5
+echo $ECHO_N "checking for usable $cf_x_athena/Xmu package... $ECHO_C" >&6
+if test "${cf_cv_xaw_compat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >conftest.$ac_ext <<_ACEOF
+#line 10444 "configure"
+#include "confdefs.h"
+
+#include <X11/Xmu/CharSet.h>
+
+int
+main ()
+{
+
+int check = XmuCompareISOLatin1("big", "small")
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10460: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10463: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10466: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10469: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_xaw_compat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+cf_cv_xaw_compat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:10479: result: $cf_cv_xaw_compat" >&5
+echo "${ECHO_T}$cf_cv_xaw_compat" >&6
+
+ if test "$cf_cv_xaw_compat" = no
+ then
+ # workaround for broken ".pc" files...
+ case "$cf_x_athena_lib" in
+ (*-lXmu*)
+ ;;
+ (*)
+ test -n "$verbose" && echo " work around broken package" 1>&6
+
+echo "${as_me:-configure}:10491: testing work around broken package ..." 1>&5
+
+ cf_save_xmu="$LIBS"
+ cf_first_lib=`echo "$cf_save_xmu" | sed -e 's/^ *//' -e 's/ .*//'`
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists xmu; then
+ test -n "$verbose" && echo " found package xmu" 1>&6
+
+echo "${as_me:-configure}:10499: testing found package xmu ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags xmu 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs xmu 2>/dev/null`"
+ test -n "$verbose" && echo " package xmu CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:10505: testing package xmu CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package xmu LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:10509: testing package xmu LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ LIBS="$cf_save_xmu"
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:10609: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib $cf_pkgconfig_libs %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:10614: testing ...after $LIBS ..." 1>&5
+
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:10622: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%$cf_first_lib %$cf_first_lib -lXmu %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:10627: testing ...after $LIBS ..." 1>&5
+
+fi
+
+ for cf_trim_lib in Xmu Xt X11
+ do
+ case "$LIBS" in
+ (*-l$cf_trim_lib\ *-l$cf_trim_lib*)
+ LIBS=`echo "$LIBS " | sed -e 's/ / /g' -e 's%-l'"$cf_trim_lib"' %%' -e 's/ $//'`
+ test -n "$verbose" && echo " ..trimmed $LIBS" 1>&6
+
+echo "${as_me:-configure}:10638: testing ..trimmed $LIBS ..." 1>&5
+
+ ;;
+ esac
+ done
+
+ ;;
+ esac
+ fi
+
+ break
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ :
+fi
+
+ done
+fi
+
+if test -z "$cf_x_athena_lib" ; then
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists Xext; then
+ test -n "$verbose" && echo " found package Xext" 1>&6
+
+echo "${as_me:-configure}:10663: testing found package Xext ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags Xext 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs Xext 2>/dev/null`"
+ test -n "$verbose" && echo " package Xext CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:10669: testing package Xext CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package Xext LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:10673: testing package Xext LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+ echo "$as_me:10774: checking for XextCreateExtension in -lXext" >&5
+echo $ECHO_N "checking for XextCreateExtension in -lXext... $ECHO_C" >&6
+if test "${ac_cv_lib_Xext_XextCreateExtension+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lXext $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line 10782 "configure"
+#include "confdefs.h"
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char XextCreateExtension ();
+int
+main ()
+{
+XextCreateExtension ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10801: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10804: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10807: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10810: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_Xext_XextCreateExtension=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_lib_Xext_XextCreateExtension=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:10821: result: $ac_cv_lib_Xext_XextCreateExtension" >&5
+echo "${ECHO_T}$ac_cv_lib_Xext_XextCreateExtension" >&6
+if test $ac_cv_lib_Xext_XextCreateExtension = yes; then
+
+cf_add_libs="-lXext"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+fi
+
+fi
+
+# OSX is schizoid about who owns /usr/X11 (old) versus /opt/X11 (new), and (and
+# in some cases has installed dummy files in the former, other cases replaced
+# it with a link to the new location). This complicates the configure script.
+# Check for that pitfall, and recover using pkg-config
+#
+# If none of these are set, the configuration is almost certainly broken.
+if test -z "${X_CFLAGS}${X_PRE_LIBS}${X_LIBS}${X_EXTRA_LIBS}"
+then
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists x11; then
+ test -n "$verbose" && echo " found package x11" 1>&6
+
+echo "${as_me:-configure}:10857: testing found package x11 ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags x11 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs x11 2>/dev/null`"
+ test -n "$verbose" && echo " package x11 CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:10863: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package x11 LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:10867: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ { echo "$as_me:10967: WARNING: unable to find X11 library" >&5
+echo "$as_me: WARNING: unable to find X11 library" >&2;}
+fi
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists ice; then
+ test -n "$verbose" && echo " found package ice" 1>&6
+
+echo "${as_me:-configure}:10974: testing found package ice ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags ice 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs ice 2>/dev/null`"
+ test -n "$verbose" && echo " package ice CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:10980: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package ice LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:10984: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ { echo "$as_me:11084: WARNING: unable to find ICE library" >&5
+echo "$as_me: WARNING: unable to find ICE library" >&2;}
+fi
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists sm; then
+ test -n "$verbose" && echo " found package sm" 1>&6
+
+echo "${as_me:-configure}:11091: testing found package sm ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags sm 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs sm 2>/dev/null`"
+ test -n "$verbose" && echo " package sm CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11097: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package sm LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11101: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ { echo "$as_me:11201: WARNING: unable to find SM library" >&5
+echo "$as_me: WARNING: unable to find SM library" >&2;}
+fi
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists xt; then
+ test -n "$verbose" && echo " found package xt" 1>&6
+
+echo "${as_me:-configure}:11208: testing found package xt ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags xt 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs xt 2>/dev/null`"
+ test -n "$verbose" && echo " package xt CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11214: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package xt LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11218: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ { echo "$as_me:11318: WARNING: unable to find Xt library" >&5
+echo "$as_me: WARNING: unable to find Xt library" >&2;}
+fi
+
+fi
+
+cf_have_X_LIBS=no
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists xt; then
+ test -n "$verbose" && echo " found package xt" 1>&6
+
+echo "${as_me:-configure}:11329: testing found package xt ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags xt 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs xt 2>/dev/null`"
+ test -n "$verbose" && echo " package xt CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11335: testing package xt CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package xt LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11339: testing package xt LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ case "x$LIBS" in
+ (*-lX11*)
+ ;;
+ (*)
+# we have an "xt" package, but it may omit Xt's dependency on X11
+echo "$as_me:11440: checking for usable X dependency" >&5
+echo $ECHO_N "checking for usable X dependency... $ECHO_C" >&6
+if test "${cf_cv_xt_x11_compat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >conftest.$ac_ext <<_ACEOF
+#line 11447 "configure"
+#include "confdefs.h"
+
+#include <X11/Xlib.h>
+
+int
+main ()
+{
+
+ int rc1 = XDrawLine((Display*) 0, (Drawable) 0, (GC) 0, 0, 0, 0, 0);
+ int rc2 = XClearWindow((Display*) 0, (Window) 0);
+ int rc3 = XMoveWindow((Display*) 0, (Window) 0, 0, 0);
+ int rc4 = XMoveResizeWindow((Display*)0, (Window)0, 0, 0, 0, 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:11466: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11469: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:11472: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11475: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_xt_x11_compat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+cf_cv_xt_x11_compat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:11485: result: $cf_cv_xt_x11_compat" >&5
+echo "${ECHO_T}$cf_cv_xt_x11_compat" >&6
+ if test "$cf_cv_xt_x11_compat" = no
+ then
+ test -n "$verbose" && echo " work around broken X11 dependency" 1>&6
+
+echo "${as_me:-configure}:11491: testing work around broken X11 dependency ..." 1>&5
+
+ # 2010/11/19 - good enough until a working Xt on Xcb is delivered.
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists x11; then
+ test -n "$verbose" && echo " found package x11" 1>&6
+
+echo "${as_me:-configure}:11498: testing found package x11 ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags x11 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs x11 2>/dev/null`"
+ test -n "$verbose" && echo " package x11 CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11504: testing package x11 CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package x11 LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11508: testing package x11 LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:11611: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%-lXt %-lXt -lX11 %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:11616: testing ...after $LIBS ..." 1>&5
+
+fi
+
+ fi
+ ;;
+ esac
+
+echo "$as_me:11624: checking for usable X Toolkit package" >&5
+echo $ECHO_N "checking for usable X Toolkit package... $ECHO_C" >&6
+if test "${cf_cv_xt_ice_compat+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >conftest.$ac_ext <<_ACEOF
+#line 11631 "configure"
+#include "confdefs.h"
+
+#include <X11/Shell.h>
+
+int
+main ()
+{
+int num = IceConnectionNumber(0)
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:11646: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:11649: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:11652: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:11655: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_xt_ice_compat=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+cf_cv_xt_ice_compat=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:11665: result: $cf_cv_xt_ice_compat" >&5
+echo "${ECHO_T}$cf_cv_xt_ice_compat" >&6
+
+ if test "$cf_cv_xt_ice_compat" = no
+ then
+ # workaround for broken ".pc" files used for X Toolkit.
+ case "x$X_PRE_LIBS" in
+ (*-lICE*)
+ case "x$LIBS" in
+ (*-lICE*)
+ ;;
+ (*)
+ test -n "$verbose" && echo " work around broken ICE dependency" 1>&6
+
+echo "${as_me:-configure}:11679: testing work around broken ICE dependency ..." 1>&5
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists ice; then
+ test -n "$verbose" && echo " found package ice" 1>&6
+
+echo "${as_me:-configure}:11684: testing found package ice ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags ice 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs ice 2>/dev/null`"
+ test -n "$verbose" && echo " package ice CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11690: testing package ice CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package ice LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11694: testing package ice LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists sm; then
+ test -n "$verbose" && echo " found package sm" 1>&6
+
+echo "${as_me:-configure}:11793: testing found package sm ..." 1>&5
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags sm 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs sm 2>/dev/null`"
+ test -n "$verbose" && echo " package sm CFLAGS: $cf_pkgconfig_incs" 1>&6
+
+echo "${as_me:-configure}:11799: testing package sm CFLAGS: $cf_pkgconfig_incs ..." 1>&5
+
+ test -n "$verbose" && echo " package sm LIBS: $cf_pkgconfig_libs" 1>&6
+
+echo "${as_me:-configure}:11803: testing package sm LIBS: $cf_pkgconfig_libs ..." 1>&5
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+cf_add_libs="$cf_pkgconfig_libs"
+# Filter out duplicates - this happens with badly-designed ".pc" files...
+for cf_add_1lib in $LIBS
+do
+ for cf_add_2lib in $cf_add_libs
+ do
+ if test "x$cf_add_1lib" = "x$cf_add_2lib"
+ then
+ cf_add_1lib=
+ break
+ fi
+ done
+ test -n "$cf_add_1lib" && cf_add_libs="$cf_add_libs $cf_add_1lib"
+done
+LIBS="$cf_add_libs"
+
+ :
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+ :
+fi
+
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+test -n "$verbose" && echo " ...before $LIBS" 1>&6
+
+echo "${as_me:-configure}:11912: testing ...before $LIBS ..." 1>&5
+
+LIBS=`echo "$LIBS" | sed -e "s/[ ][ ]*/ /g" -e "s%-lXt %-lXt $X_PRE_LIBS %" -e 's% % %g'`
+test -n "$verbose" && echo " ...after $LIBS" 1>&6
+
+echo "${as_me:-configure}:11917: testing ...after $LIBS ..." 1>&5
+
+fi
+
+ ;;
+ esac
+ ;;
+ esac
+ fi
+
+ cf_have_X_LIBS=yes
+
+else
+ cf_pkgconfig_incs=
+ cf_pkgconfig_libs=
+
+ LDFLAGS="$X_LIBS $LDFLAGS"
+
+test -n "$verbose" && echo " checking additions to CFLAGS" 1>&6
+
+echo "${as_me:-configure}:11937: testing checking additions to CFLAGS ..." 1>&5
+
+cf_check_cflags="$CFLAGS"
+cf_check_cppflags="$CPPFLAGS"
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $X_CFLAGS
+do
+case $cf_fix_cppflags in
+(no)
+ case $cf_add_cflags in
+ (-undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "x${cf_add_cflags}" != "x${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ (*$cf_add_cflags)
+ ;;
+ (*)
+ case $cf_add_cflags in
+ (-D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ (*)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+(yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"