1 -------------------------------------------------------------------------------
2 -- Copyright (c) 1998-2018,2019 Free Software Foundation, Inc. --
4 -- Permission is hereby granted, free of charge, to any person obtaining a --
5 -- copy of this software and associated documentation files (the --
6 -- "Software"), to deal in the Software without restriction, including --
7 -- without limitation the rights to use, copy, modify, merge, publish, --
8 -- distribute, distribute with modifications, sublicense, and/or sell copies --
9 -- of the Software, and to permit persons to whom the Software is furnished --
10 -- to do so, subject to the following conditions: --
12 -- The above copyright notice and this permission notice shall be included --
13 -- in all copies or substantial portions of the Software. --
15 -- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS --
16 -- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF --
17 -- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN --
18 -- NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, --
19 -- DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR --
20 -- OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE --
21 -- USE OR OTHER DEALINGS IN THE SOFTWARE. --
23 -- Except as contained in this notice, the name(s) of the above copyright --
24 -- holders shall not be used in advertising or otherwise to promote the --
25 -- sale, use or other dealings in this Software without prior written --
27 -------------------------------------------------------------------------------
28 -- $Id: INSTALL,v 1.213 2019/06/30 15:28:56 tom Exp $
29 ---------------------------------------------------------------------
30 How to install Ncurses/Terminfo on your system
31 ---------------------------------------------------------------------
33 ************************************************************
34 * READ ALL OF THIS FILE BEFORE YOU TRY TO INSTALL NCURSES. *
35 ************************************************************
37 You should be reading the file INSTALL in a directory called ncurses-d.d, where
38 d.d is the current version number. There should be several subdirectories,
39 including `c++', `form', `man', `menu', 'misc', `ncurses', `panel', `progs',
40 and `test'. See the README file for a roadmap to the package.
42 If you are a distribution integrator or packager, please read and act on the
43 section titled IF YOU ARE A SYSTEM INTEGRATOR below.
45 If you are converting from BSD curses and do not have root access, be sure
46 to read the BSD CONVERSION NOTES section below.
48 If you are trying to build applications using gpm with ncurses,
49 read the USING NCURSES WITH GPM section below.
51 If you are running over the Andrew File System see the note below on
52 USING NCURSES WITH AFS.
54 If you are cross-compiling, see the note below on BUILDING NCURSES WITH A
57 If you want to build the Ada95 binding, go to the Ada95 directory and
58 follow the instructions there. The Ada95 binding is not covered below.
64 You will need the following to build and install ncurses under UNIX:
66 * ANSI C compiler (gcc, for instance)
68 * awk (mawk or gawk will do)
70 * BSD or System V style install (a script is enclosed)
72 Ncurses has been also built in the OS/2 EMX environment.
75 INSTALLATION PROCEDURE:
76 ----------------------
78 1. First, decide whether you want ncurses to replace your existing library (in
79 which case you'll need super-user privileges) or be installed in parallel
82 The --prefix option to configure changes the root directory for installing
83 ncurses. The default is normally in subdirectories of /usr/local, except
84 for systems where ncurses is normally installed as a system library (see
85 "IF YOU ARE A SYSTEM INTEGRATOR"). Use --prefix=/usr to replace your
86 default curses distribution.
88 The package gets installed beneath the --prefix directory as follows:
90 In $(prefix)/bin: tic, infocmp, captoinfo, tset,
91 reset, clear, tput, toe, tabs
92 In $(prefix)/lib: libncurses*.* libcurses.a
93 In $(prefix)/share/terminfo: compiled terminal descriptions
94 In $(prefix)/include: C header files
95 Under $(prefix)/man: the manual pages
97 Note that the configure script attempts to locate previous installation of
98 ncurses, and will set the default prefix according to where it finds the
101 Do not use commands such as
103 make install prefix=XXX
105 to change the prefix after configuration, since the prefix value is used
106 for some absolute pathnames such as TERMINFO. Instead do this
108 make install DESTDIR=XXX
110 See also the discussion of --with-install-prefix.
112 2. Type `./configure' in the top-level directory of the distribution to
113 configure ncurses for your operating system and create the Makefiles.
114 Besides --prefix, various configuration options are available to customize
115 the installation; use `./configure --help' to list the available options.
117 If your operating system is not supported, read the PORTABILITY section in
118 the file ncurses/README for information on how to create a configuration
119 file for your system.
121 The `configure' script generates makefile rules for one or more object
122 models and their associated libraries:
124 libncurses.a (normal)
126 libcurses.a (normal, a link to libncurses.a)
127 This gets left out if you configure with --disable-overwrite.
129 libncurses.so (shared)
131 libncurses_g.a (debug)
133 libncurses_p.a (profile)
135 libncurses.la (libtool)
137 If you configure using the --enable-widec option, a "w" is appended to the
138 library names (e.g., libncursesw.a), and the resulting libraries support
139 wide-characters, e.g., via a UTF-8 locale. The corresponding header files
140 are compatible with the non-wide-character configuration; wide-character
141 features are provided by ifdef's in the header files. The wide-character
142 library interfaces are not binary-compatible with the non-wide-character
143 version. Building and running the wide-character code relies on a fairly
144 recent implementation of libiconv. We have built this configuration on
145 various systems using libiconv, sometimes requiring libutf8.
147 If you configure using the --with-pthread option, a "t" is appended to
148 the library names (e.g., libncursest.a, libncursestw.a).
150 If you do not specify any models, the normal and debug libraries will be
151 configured. Typing `configure' with no arguments is equivalent to:
153 ./configure --with-normal --with-debug --enable-overwrite
157 ./configure --with-shared
159 makes the shared libraries the default, resulting in
161 ./configure --with-shared --with-normal --with-debug --enable-overwrite
163 If you want only shared libraries, type
165 ./configure --with-shared --without-normal --without-debug
167 Rules for generating shared libraries are highly dependent upon the choice
168 of host system and compiler. We've been testing shared libraries on
169 several systems, but more work needs to be done to make shared libraries
170 work on other systems.
172 If you have libtool installed, you can type
174 ./configure --with-libtool
176 to generate the appropriate static and/or shared libraries for your
177 platform using libtool.
179 You can make curses and terminfo fall back to an existing file of termcap
180 definitions by configuring with --enable-termcap. If you do this, the
181 library will search /etc/termcap before the terminfo database, and will
182 also interpret the contents of the TERM environment variable. See the
183 section BSD CONVERSION NOTES below.
185 3. Type `make'. Ignore any warnings, no error messages should be produced.
186 This should compile the ncurses library, the terminfo compiler tic(1),
187 captoinfo(1), infocmp(1), toe(1), clear(1) tset(1), reset(1), and tput(1)
188 programs (see the manual pages for explanation of what they do), some test
189 programs, and the panels, menus, and forms libraries.
191 4. Run ncurses and several other test programs in the test directory to
192 verify that ncurses functions correctly before doing an install that
193 may overwrite system files. Read the file test/README for details on
196 NOTE: You must have installed the terminfo database, or set the
197 environment variable $TERMINFO to point to a SVr4-compatible terminfo
198 database before running the test programs. Not all vendors' terminfo
199 databases are SVr4-compatible, but most seem to be.
201 It is possible to configure ncurses to use other terminfo database formats.
202 A few are provided as examples in the include-directory (see --with-caps).
204 If you run the test programs WITHOUT installing terminfo, ncurses may
205 read the termcap file and cache that in $HOME/.terminfo, which will
206 thereafter be used instead of the terminfo database. See the comments
207 on "--enable-getcap-cache", to see why this is a Bad Thing.
209 The ncurses program is designed specifically to test the ncurses library.
210 You can use it to verify that the screen highlights work correctly, that
211 cursor addressing and window scrolling works OK, etc.
213 5. Once you've tested, you can type `make install' to install libraries,
214 the programs, the terminfo database and the manual pages. Alternately, you
215 can type `make install' in each directory you want to install. In the
216 top-level directory, you can do a partial install using these commands:
218 'make install.progs' installs tic, infocmp, etc...
219 'make install.includes' installs the headers.
220 'make install.libs' installs the libraries (and the headers).
221 'make install.data' installs the terminfo data. (Note: `tic' must
222 be installed before the terminfo data can be
224 'make install.man' installs the manual pages.
226 ############################################################################
227 # CAVEAT EMPTOR: `install.data' run as root will NUKE any existing #
228 # terminfo database. If you have any custom or unusual entries SAVE them #
229 # before you install ncurses. #
230 ############################################################################
232 The terminfo(5) manual page must be preprocessed with tbl(1) before
233 being formatted by nroff(1). Modern man(1) implementations tend to do
234 this by default, but you may want to look at your version's manual page
235 to be sure. You may also install the manual pages after preprocessing
236 with tbl(1) by specifying the configure option --with-manpage-tbl.
238 If the system already has a curses library that you need to keep using
239 you'll need to distinguish between it and ncurses. See the discussion of
240 --disable-overwrite. If ncurses is installed outside the standard
241 directories (/usr/include and /usr/lib) then all your users will need to
242 use the -I option to compile programs and -L to link them.
244 If you have another curses installed in your system and you accidentally
245 compile using its curses.h you'll end up with a large number of
246 undefined symbols at link time.
248 IF YOU DO NOT HAVE ROOT: Change directory to the `progs' subdirectory
249 and run the `capconvert' script. This script will deduce various things
250 about your environment and use them to build you a private terminfo tree,
251 so you can use ncurses applications.
253 If more than one user at your site does this, the space for the duplicate
254 trees is wasted. Try to get your site administrators to install a system-
255 wide terminfo tree instead.
257 See the BSD CONVERSION NOTES section below for a few more details.
259 6. The c++ directory has C++ classes that are built on top of ncurses and
260 panels. You must have c++ (and its libraries) installed before you can
261 compile and run the demo.
263 Use --without-cxx-binding to tell configure to not build the C++ bindings
266 If you do not have C++, you must use the --without-cxx option to tell
267 the configure script to not attempt to determine the type of 'bool'
268 which may be supported by C++. IF YOU USE THIS OPTION, BE ADVISED THAT
269 YOU MAY NOT BE ABLE TO COMPILE (OR RUN) NCURSES APPLICATIONS WITH C++.
272 SUMMARY OF CONFIGURE OPTIONS:
273 ----------------------------
275 The configure script provides a short list of its options when you type
279 The --help and several options are common to all configure scripts that are
280 generated with autoconf. Those are all listed before the line
282 --enable and --with options recognized:
284 The other options are specific to this package. We list them in alphabetic
287 --disable-assumed-color
288 With ncurses 5.1, we introduced a new function, assume_default_colors()
289 which allows applications to specify what the default foreground and
290 background color are assumed to be. Most color applications use
291 full-screen color; but a few do not color the background. While the
292 assumed values can be overridden by invoking assume_default_colors(),
293 you may find it useful to set the assumed values to the pre-5.1
294 convention, using this configure option.
297 Assume machine has little memory. The configure script attempts to
298 determine if your machine has enough memory (about 6Mb) to compile the
299 terminfo database without writing portions to disk. Some allocators
300 return deceptive results, so you may have to override the configure
301 script. Or you may be building tic for a smaller machine.
303 --disable-big-strings
304 Disable compile-time optimization of predefined tables which puts
305 all of their strings into a very long string, to reduce relocation
309 Use only built-in data. The ncurses libraries normally read terminfo
310 and termcap data from disk. You can configure ncurses to have a
311 built-in database, aka "fallback" entries. Embedded applications may
312 have no need for an external database. Some, but not all of the
313 programs are useful in this configuration, e.g., tset and tput versus
317 Do not install the terminal database. This is used to omit features
318 for packages, as done with --without-progs.
321 Use the option --disable-echo to make the build-log less verbose by
322 suppressing the display of the compile and link commands. This makes
323 it easier to see the compiler warnings. (You can always use "make -n"
324 to see the options that are used).
327 Disable function-extensions. Configure ncurses without the functions
328 that are not specified by XSI. See ncurses/modules for the exact
329 list of library modules that would be suppressed.
331 --disable-gnat-projects
332 Disable GNAT projects even if usable, for testing old makefile rules.
335 Compile without hashmap scrolling-optimization code. This algorithm is
338 --disable-home-terminfo
339 The $HOME/.terminfo directory is normally added to ncurses' search
340 list for reading/writing terminfo entries, since that directory is
341 more likely writable than the system terminfo database. Use this
342 option to disable the feature altogether.
345 Disable compiler flags needed to use large-file interfaces.
348 For testing, compile-in code that frees memory that normally would not
349 be freed, to simplify analysis of memory-leaks.
351 Any implementation of curses must not free the memory associated with
352 a screen, since (even after calling endwin()), it must be available
353 for use in the next call to refresh(). There are also chunks of
354 memory held for performance reasons. That makes it hard to analyze
355 curses applications for memory leaks. To work around this, build a
356 debugging version of the ncurses library which frees those chunks
357 which it can, and provides the _nc_free_and_exit() function to free
358 the remainder and then exit. The ncurses utility and test programs
359 use this feature, e.g., via the ExitProgram() macro.
361 Because this lies outside of the library's intended usage, it is not
362 normally considered part of the ABI. If there were some (as yet
363 unplanned) extension which frees memory in a manner that would let the
364 library resume and reallocate memory, then that would not use a "_nc_"
367 --disable-lib-suffixes
368 Suppress the "w", "t" or "tw" suffixes which normally would be added
369 to the library names for the --enable-widec and --with-pthread options.
371 --disable-libtool-version
372 when using --with-libtool, control how the major/minor version numbers
373 are used for constructing the library name.
375 The default uses the -version-number feature of libtool, which makes
376 the library names compatible (though not identical) with the standard
377 build using --with-shared.
379 Use --disable-libtool-version to use the libtool -version-info feature.
380 This corresponds to the setting used before patch 20100515.
382 Starting with patch 20141115, using this option causes the configure
383 script to apply the top-level VERSION file to the ABI version used
387 The header files will ignore use of the _LP64 symbol to make chtype
388 and mmask_t types 32 bits (they may be long on 64-bit hosts, for
389 compatibility with older releases).
391 NOTE: this is potentially an ABI change, depending on existing
392 packages. The default for this option is "disabled" for ncurses
393 ABI 5, and "enabled" for ABI 6.
396 For testing, use functions rather than macros. The program will run
397 more slowly, but it is simpler to debug. This defines NCURSES_NOMACROS
398 at build time. See also the --enable-expanded option.
401 If you are installing ncurses on a system which contains another
402 development version of curses, or which could be confused by the loader
403 for another version, we recommend that you leave out the link to
404 -lcurses. The ncurses library is always available as -lncurses.
405 Disabling overwrite also causes the ncurses header files to be
406 installed into a subdirectory, e.g., /usr/local/include/ncurses,
407 rather than the include directory. This makes it simpler to avoid
408 compile-time conflicts with other versions of curses.h
410 Putting the header files into a subdirectory assumes that applications
411 will follow the (standard) practice of including the headers with
412 reference to the subdirectory name. For instance, the normal ncurses
413 header would be included using
415 #include <ncurses/curses.h>
416 #include <ncurses/term.h>
418 while the ncursesw headers would be found this way:
420 #include <ncursesw/curses.h>
421 #include <ncursesw/term.h>
423 In either case (with or without the --disable-overwrite option),
424 almost all applications are designed to include a related set of
425 curses header files from the same directory.
427 Manipulating the --includedir configure option to put header files
428 directly in a subdirectory of the normal include-directory defeats
429 this, and breaks builds of portable applications. Likewise, putting
430 some headers in /usr/include, and others in a subdirectory is a good
433 When configured with --disable-overwrite, the installed header files'
434 embedded #include's are adjusted to use the same style of includes
435 noted above. In particular, the unctrl.h header is included from
436 curses.h, which means that a makefile which tells the compiler to
437 include directly from the subdirectory will fail to compile correctly.
438 Without some special effort, it will either fail to compile at all,
439 or the compiler may find a different unctrl.h file.
442 If --enable-rpath is given, the generated makefiles normally will
443 rebuild shared libraries during install. Use this option to simply
444 copy whatever the linker produced.
446 Static libraries cannot simply be copied because tools use timestamps
447 to determine if the library's symbol table is up to date. If your
448 install program supports the "-p" (preserve timestamp) option, that
449 is used when --disable-relink is given, to avoid rebuilding the symbol
452 Finally, some tools ignore the subsecond timestamps supported by some
453 filesystems. This option adds a 1-second sleep to help those tools
454 avoid unnecessary relinking during the install process.
456 --disable-root-environ
457 Compile with environment restriction, so certain environment variables
458 are not available when running as root, or via a setuid/setgid
459 application. These are (for example $TERMINFO) those that allow the
460 search path for the terminfo or termcap entry to be customized.
463 Normally the configure script helps link libraries found in unusual
464 places by adding an rpath option to the link command. If you are
465 building packages, this feature may be redundant. Use this option
466 to suppress the feature.
468 --disable-scroll-hints
469 Compile without scroll-hints code. This option is ignored when
470 hashmap scrolling is configured, which is the default.
473 Do not strip installed executables.
475 --disable-tic-depends
476 When building shared libraries, normally the tic library is linked to
477 depend upon the ncurses library (or equivalently, on the tinfo-library
478 if the --with-termlib option was given). The tic- and tinfo-library
479 ABIs do not depend on the --enable-widec option. Some packagers have
480 used this to reduce the number of library files which are packaged by
481 using only one copy of those libraries. To make this work properly,
482 the tic library must be built without an explicit dependency on the
483 underlying library (ncurses vs ncursesw, tinfo vs tinfow). Use this
484 configure option to do that.
486 configure --with-ticlib --with-shared --disable-tic-depends
488 --disable-tparm-varargs
489 Portable programs should call tparm() using the fixed-length parameter
490 list documented in X/Open. ncurses provides varargs support for this
491 function. Use --disable-tparm-varargs to disable this support.
493 --disable-wattr-macros
494 The 6.0 ABI adds support for extended colors and for extended mouse.
495 The former is a noticeable problem when developers inadvertantly
496 compile using the ncurses6 header files and link with an ncurses5
497 library, because the wattr* macros use a new field in the WINDOW
498 structure. These macros are used in several applications.
500 Since ncurses provides an actual function for each of these macros,
501 suppressing them from the curses.h header allows the ncurses5 libraries
502 to be used in most applications.
504 NOTE: The extended colors also are used in the cchar_t structure, but
505 fewer applications use that.
507 NOTE: This workaround does not help with mismatches in the ncurses
508 mouse version. The extended mouse feature uses one less fewer bit for
509 each button, so that only the first button will work as expected with
510 a mismatch between header and library. Again, most applications will
511 work, since most use only the first button.
514 For testing, compile-in assertion code. This is used only for a few
515 places where ncurses cannot easily recover by returning an error code.
517 --enable-broken_linker
518 A few platforms have what we consider a broken linker: it cannot link
519 objects from an archive solely by referring to data objects in those
520 files, but requires a function reference. This configure option
521 changes several data references to functions to work around this
524 NOTE: With ncurses 5.1, this may not be necessary, since we are
525 told that some linkers interpret uninitialized global data as a
526 different type of reference which behaves as described above. We have
527 explicitly initialized all of the global data to work around the
531 Recognize BSD-style prefix padding. Some ancient BSD programs (such as
532 nethack) call tputs("50") to implement delays.
535 Compile with experimental $COLORFGBG code. That environment variable
536 is set by some terminal emulators as a hint to applications, by
537 advertising the default foreground and background colors. During
538 initialization, ncurses sets color pair 0 to match this.
541 The curses interface as documented in XSI is rather old, in fact
542 including features that precede ANSI C. The prototypes generally do
543 not make effective use of "const". When using stricter compilers (or
544 gcc with appropriate warnings), you may see warnings about the mismatch
545 between const and non-const data. We provide a configure option which
546 changes the interfaces to use const - quieting these warnings and
547 reflecting the actual use of the parameters more closely. The ncurses
548 library uses the symbol NCURSES_CONST for these instances of const,
549 and if you have asked for compiler warnings, will add gcc's const-qual
550 warning. There will still be warnings due to subtle inconsistencies
551 in the interface, but at a lower level.
553 NOTE: configuring ncurses with this option may detract from the
554 portability of your applications by encouraging you to use const in
555 places where the XSI curses interface would not allow them. Similar
556 issues arise when porting to SVr4 curses, which uses const in even
560 For testing, generate functions for certain macros to make them visible
561 as such to the debugger. See also the --disable-macros option.
564 Extend the cchar_t structure to allow more than 16 colors to be
565 encoded. This applies only to the wide-character (--enable-widec)
568 NOTE: using this option will make libraries which are not binary-
569 compatible with libncursesw 5.4. None of the interfaces change, but
570 applications which have an array of cchar_t's must be recompiled.
573 Modify the encoding of mouse state to make room for a 5th mouse button.
574 That allows one to use ncurses with a wheel mouse with xterm or
575 similar X terminal emulators.
577 NOTE: using this option will make libraries which are not binary-
578 compatible with libncursesw 5.4. None of the interfaces change, but
579 applications which have mouse mask mmask_t's must be recompiled.
582 Modify the file-format written by putwin() to use printable text rather
583 than binary files, allowing getwin() to read screen dumps written by
584 differently-configured ncurses libraries. The extended getwin() can
585 still read binary screen dumps from the "same" configuration of
586 ncurses. This does not change the ABI (the binary interface seen by
587 calling applications).
590 Use the 4.4BSD getcap code if available, or a bundled version of it to
591 fetch termcap entries. Entries read in this way cannot use (make
592 cross-references to) the terminfo tree, but it is faster than reading
595 If configured for one of the *BSD systems, this automatically uses
596 the hashed database system produced using cap_mkdb or similar tools.
597 In that case, there is no advantage in using the --enable-getcap-cache
600 See also the --with-hashed-db option.
602 --enable-getcap-cache
603 Cache translated termcaps under the directory $HOME/.terminfo
605 NOTE: this sounds good - it makes ncurses run faster the second time.
606 But look where the data comes from - an /etc/termcap containing lots of
607 entries that are not up to date. If you configure with this option and
608 forget to install the terminfo database before running an ncurses
609 application, you will end up with a hidden terminfo database that
610 generally does not support color and will miss some function keys.
613 Compile-in cursor-optimization code that uses hard-tabs. We would make
614 this a standard feature except for the concern that the terminfo entry
615 may not be accurate, or that your stty settings have disabled the use
619 Compile-in experimental interop bindings. These provide generic types
620 for the form-library.
623 Controls whether the filesystem on which the terminfo database resides
624 supports mixed-case filenames (normal for UNIX, but not on other
625 systems). If you do not specify this option, the configure script
626 checks the current filesystem.
629 Compile-in support for the $NCURSES_NO_PADDING environment variable,
630 which allows you to suppress the effect of non-mandatory padding in
631 terminfo entries. This is the default, unless you have disabled the
634 --enable-opaque-curses
637 --enable-opaque-panel
638 Define symbol in curses.h which controls whether some library
639 structures are treated as "opaque". The --enable-opaque-curses option
640 is overridden by the --enable-reentrant option.
643 If pkg-config is found (see --with-pkg-config), generate ".pc" files
644 for each of the libraries, and install them in pkg-config's library
647 --enable-pthreads-eintr
648 add logic in threaded configuration to ensure that a read(2) system
649 call can be interrupted for SIGWINCH.
652 Compile configuration which improves reentrant use of the library by
653 reducing global and static variables. This option is also set if
654 --with-pthread is used.
656 Enabling this option adds a "t" to the library names, except for the
657 special case when --enable-weak-symbols is also used.
660 Use rpath option when generating shared libraries, and (with some
661 restrictions) when linking the corresponding programs. This originally
662 (in 1997) applied mainly to systems using the GNU linker (read the
665 More recently it is useful for systems that require special treatment
666 shared libraries in "unusual" locations. The "system" libraries reside
667 in directories which are on the loader's default search-path. While
668 you may be able to use workarounds such as the $LD_LIBRARY_PATH
669 environment variable, they do not work with setuid applications since
670 the LD_LIBRARY_PATH variable would be unset in that situation.
672 This option does not apply to --with-libtool, since libtool makes
673 extra assumptions about rpath.
675 --enable-safe-sprintf
676 Compile with experimental safe-sprintf code. You may consider using
677 this if you are building ncurses for a system that has neither
678 vsnprintf() or vsprintf(). It is slow, however, and is used only on
679 very old systems which lack vsnprintf().
682 The term.h header declares a Booleans[] array typed "char". But it
683 stores signed values there and "char" is not necessarily signed.
684 Some packagers choose to alter the type of Booleans[] though this
685 is not strictly compatible. This option allows one to implement this
686 alteration without patching the source code.
689 Compile support for ncurses' SIGWINCH handler. If your application has
690 its own SIGWINCH handler, ncurses will not use its own. The ncurses
691 handler causes wgetch() to return KEY_RESIZE when the screen-size
692 changes. This option is the default, unless you have disabled the
696 Compile-in support for extended functions which accept a SCREEN pointer,
697 reducing the need for juggling the global SP value with set_term() and
700 --enable-string-hacks
701 Controls whether strlcat and strlcpy may be used. The same issue
702 applies to OpenBSD's warnings about snprintf, noting that this function
703 is weakly standardized.
705 Aside from stifling these warnings, there is no functional improvement
709 If your system supports symbolic links, make tic use symbolic links
710 rather than hard links to save diskspace when writing aliases in the
714 Compile-in support for user-definable terminal capabilities. Use the
715 -x option of tic and infocmp to treat unrecognized terminal
716 capabilities as user-defined strings. This option is the default,
717 unless you have disabled the extended functions.
720 Enable experimental terminal-driver. This is currently used for the
721 MinGW port, by providing a way to substitute the low-level terminfo
722 library with different terminal drivers.
725 Compile in support for reading terminal descriptions from termcap if no
726 match is found in the terminfo database. See also the --enable-getcap
727 and --enable-getcap-cache options.
729 Termcap support requires run-time parsing rather than loading
730 predigested data. If you have specified --with-ticlib, then you
731 cannot have termcap support since run-time parsing is done in the
732 tic library, which is intentionally not part of normal linkage
736 Turn on GCC compiler warnings. There should be only a few.
738 --enable-weak-symbols
739 If the --with-pthread option is set, check if the compiler supports
740 weak-symbols. If it does, then name the thread-capable library without
741 the "t" (libncurses rather than libncursest), and provide for
742 dynamically loading the pthreads entrypoints at runtime. This allows
743 one to reduce the number of library files for ncurses.
745 --enable-wgetch-events
746 Compile with experimental wgetch-events code. See ncurses/README.IZ
749 Compile with wide-character code. This makes a different version of
750 the libraries (e.g., libncursesw.so), which stores characters as
753 NOTE: applications compiled with this configuration are not compatible
754 with those built for 8-bit characters. You cannot simply make a
755 symbolic link to equate libncurses.so with libncursesw.so
757 NOTE: the Ada95 binding may be built against either version of the the
758 ncurses library, but you must decide which: the binding installs the
759 same set of files for either version. Currently (2002/6/22) it does
760 not use the extended features from the wide-character code, so it is
761 probably better to not install the binding for that configuration.
764 Compile-in support experimental xmc (magic cookie) code.
766 --with-abi-version=NUM
767 Override the ABI version, which is used in shared library filenames.
768 Normally this is the same as the release version; some ports have
769 special requirements for compatibility.
771 This option does not affect linking with libtool, which uses the
772 release major/minor numbers.
774 --with-ada-compiler=CMD
775 Specify the Ada95 compiler command (default "gnatmake")
777 --with-ada-include=DIR
778 Tell where to install the Ada includes (default:
779 PREFIX/lib/ada/adainclude)
781 --with-ada-objects=DIR
782 Tell where to install the Ada objects (default: PREFIX/lib/ada/adalib)
785 Build a shared library for Ada95 binding, if the compiler permits.
787 NOTE: You must also set the --with-shared option on some platforms
788 for a successful build. You need not use this option when you set
789 --with-shared, unless you want to use the Ada shared library.
792 If --without-cxx is specified, override the type used for the "bool"
793 declared in curses.h (normally the type is automatically chosen to
794 correspond with that in <stdbool.h>, or defaults to platform-specific
798 If cross-compiling, specify a host C compiler, which is needed to
799 compile a few utilities which generate source modules for ncurses.
800 If you do not give this option, the configure script checks if the
801 $BUILD_CC variable is set, and otherwise defaults to gcc or cc.
803 --with-build-cflags=XXX
804 If cross-compiling, specify the host C compiler-flags. You might need
805 to do this if the target compiler has unusual flags which confuse the
808 You can also set the environment variable $BUILD_CFLAGS rather than
812 This option is provided by the same macro used for $BUILD_CC, etc.,
813 but is not directly used by ncurses.
815 --with-build-cppflags=XXX
816 If cross-compiling, specify the host C preprocessor-flags. You might
817 need to do this if the target compiler has unusual flags which confuse
820 You can also set the environment variable $BUILD_CPPFLAGS rather than
823 --with-build-ldflags=XXX
824 If cross-compiling, specify the host linker-flags. You might need to
825 do this if the target linker has unusual flags which confuse the host
828 You can also set the environment variable $BUILD_LDFLAGS rather than
831 --with-build-libs=XXX
832 If cross-compiling, the host libraries. You might need to do this if
833 the target environment requires unusual libraries.
835 You can also set the environment variable $BUILD_LIBS rather than
839 Specify an alternate terminfo capabilities file, which makes the
840 configure script look for "include/Caps.XXX". A few systems, e.g.,
841 AIX 4.x use the same overall file-format as ncurses for terminfo
842 data, but use different alignments within the tables to support
843 legacy applications. For those systems, you can configure ncurses
844 to use a terminfo database which is compatible with the native
847 --with-ccharw-max=XXX
848 Override the size of the wide-character array in cchar_t structures.
849 Changing this will alter the binary interface. This defaults to 5.
852 Override type of chtype, which stores the video attributes and (if
853 --enable-widec is not given) a character. Prior to ncurses 5.5, this
854 was always unsigned long, but with ncurses 5.5, it may be unsigned.
855 Use this option if you need to preserve compatibility with 64-bit
856 executables, e.g., by setting "--with-chtype=long" (the configure
857 script supplies "unsigned").
859 --with-config-suffix=XXX
860 Specify a suffix for the ncursesw6-config file, etc., used to work
861 around conflicts with packages.
864 When --with-shared is set, build libncurses++ as a shared library.
865 This implicitly relies upon building with gcc/g++, since other
866 compiler suites may have differences in the way shared libraries are
867 built. libtool by the way has similar limitations.
870 Specify the terminfo source file to install. Usually you will wish
871 to install ncurses' default (misc/terminfo.src). Certain systems
872 have special requirements, e.g, OS/2 EMX has a customized terminfo
876 For testing, compile and link with Conor Cahill's dbmalloc library.
877 This also sets the --disable-leaks option.
880 Generate debug-libraries (default). These are named by adding "_g"
881 to the root, e.g., libncurses_g.a
883 --with-default-terminfo-dir=XXX
884 Specify the default terminfo database directory. This is normally
885 DATADIR/terminfo, e.g., /usr/share/terminfo.
888 For testing, compile and link with Gray Watson's dmalloc library.
889 This also sets the --disable-leaks option.
891 --with-export-syms[=XXX]
892 Limit exported symbols using libtool. The configure script
893 automatically chooses an appropriate ".sym" file, which lists the
894 symbols which are part of the ABI.
896 --with-extra-suffix[=XXX]
897 Add the given suffix to header- and library-names to simplify
898 installing incompatible ncurses libraries, e.g., those using a
899 different ABI. The renaming affects the name of the
900 include-subdirectory if --disable-overwrite is given.
903 Specify a list of fallback terminal descriptions which will be
904 compiled into the ncurses library. See CONFIGURING FALLBACK ENTRIES.
906 See also "--with-tic-path" and "--with-infocmp-path".
909 use Alessandro Rubini's GPM library to provide mouse support on the
910 Linux console. Prior to ncurses 5.5, this introduced a dependency on
913 Currently ncurses uses the dlsym() function to bind to the library at
914 runtime, so it is only necessary that the library be present when
915 ncurses is built, to obtain the filename (or soname) used in the
916 corresponding dlopen() call. If you give a value for this option,
919 --with-gpm=$HOME/tmp/test-gpm.so
921 that overrides the configure check for the soname.
923 See also --without-dlsym
925 --with-hashed-db[=XXX]
926 Use a hashed database for storing terminfo data rather than storing
927 each compiled entry in a separate binary file within a directory
930 In particular, this uses the Berkeley database 1.8.5 interface, as
931 provided by that and its successors db 2, 3, and 4. The actual
932 interface is slightly different in the successor versions of the
933 Berkeley database. The database should have been configured using
934 "--enable-compat185".
936 If you use this option for configuring ncurses, tic will only be able
937 to write entries in the hashed database. infocmp can still read
938 entries from a directory tree as well as reading entries from the
939 hashed database. To do this, infocmp determines whether the $TERMINFO
940 variable points to a directory or a file, and reads the directory-tree
941 or hashed database respectively.
943 You cannot have a directory containing both hashed-database and
944 filesystem-based terminfo entries.
946 Use the parameter value to give the install-prefix used for the
948 --with-hashed-db=/usr/local/BigBase
949 to find the corresponding include- and lib-directories under the
950 given directory. Alternatively, you can specify a directory leaf
953 to make the configure script look for files in a subdirectory such as
954 /usr/include/db4/db.h
955 /usr/lib/db4/libdb.so
957 See also the --enable-getcap option.
959 --with-infocmp-path[=XXX]
960 Use this option to override the automatic detection of tic in your
961 $PATH when building fallbacks (see "--with-fallbacks").
963 --with-install-prefix=XXX
964 Allows you to specify an alternate location for installing ncurses
965 after building it. The value you specify is prepended to the "real"
966 install location. This simplifies making binary packages. The
967 makefile variable DESTDIR is set by this option. It is also possible
969 make install DESTDIR=XXX
970 since the makefiles pass that variable to subordinate makes.
972 NOTE: a few systems build shared libraries with fixed pathnames; this
973 option probably will not work for those configurations.
975 --with-lib-prefix=XXX
976 OS/2 EMX used a different naming convention from most Unix-like
977 platforms. It required that the "lib" part of a library name was
978 omitted. Newer EMX as part of eComStation does not follow that
979 convention. Use this option to override the configure script's
980 assumptions about the library-prefix. If this option is omitted, it
981 uses the original OS/2 EMX convention for that platform. Use
982 "--with-lib-prefix=lib" for the newer EMX in eComStation. Use
983 "--without-lib-prefix" to suppress it for other odd platforms.
986 Generate libraries with libtool. If this option is selected, then it
987 overrides all other library model specifications. Note that libtool
988 must already be installed, uses makefile rules dependent on GNU make,
989 and does not promise to follow the version numbering convention of
990 other shared libraries on your system. However, if the --with-shared
991 option does not succeed, you may get better results with this option.
993 If a parameter value is given, it must be the full pathname of the
994 particular version of libtool, e.g.,
995 /usr/bin/libtool-1.2.3
997 It is possible to rebuild the configure script to use the automake
998 macros for libtool, e.g., AC_PROG_LIBTOOL. See the comments in
999 aclocal.m4 for CF_PROG_LIBTOOL, and ensure that you build configure
1000 using the appropriate patch for autoconf from
1001 https://invisible-island.net/autoconf/
1003 --with-libtool-opts=XXX
1004 Allow user to pass additional libtool options into the library creation
1005 and link steps. The main use for this is to do something like
1006 ./configure --with-libtool-opts=-static
1007 to get the same behavior as automake-flavored
1008 ./configure --enable-static
1010 --with-manpage-aliases
1011 Tell the configure script you wish to create entries in the
1012 man-directory for aliases to manpages which list them, e.g., the
1013 functions in the panel manpage. This is the default. You can disable
1014 it if your man program does this. You can also disable
1015 --with-manpage-symlinks to install files containing a ".so" command
1016 rather than symbolic links.
1018 --with-manpage-format=XXX
1019 Tell the configure script how you would like to install man-pages. The
1020 option value must be one of these: gzip, compress, BSDI, normal,
1021 formatted. If you do not give this option, the configure script
1022 attempts to determine which is the case.
1024 --with-manpage-renames=XXX
1025 Tell the configure script that you wish to rename the manpages while
1026 installing. Currently the only distribution which does this is Debian.
1027 The option value specifies the name of a file that lists the renamed
1028 files, e.g., $srcdir/man/man_db.renames
1030 --with-manpage-symlinks
1031 Tell the configure script that you wish to make symbolic links in the
1032 man-directory for aliases to the man-pages. This is the default, but
1033 can be disabled for systems that provide this automatically. Doing
1034 this on systems that do not support symbolic links will result in
1035 copying the man-page for each alias.
1038 Tell the configure script that you wish to preprocess the manpages
1039 by running them through tbl to generate tables understandable by
1043 Override type of mmask_t, which stores the mouse mask. Prior to
1044 ncurses 5.5, this was always unsigned long, but with ncurses 5.5, it
1045 may be unsigned. Use this option if you need to preserve compatibility
1046 with 64-bit executables.
1049 Generate normal (i.e., static) libraries (default).
1051 Note: on Linux, the configure script will attempt to use the GPM
1052 library via the dlsym() function call. Use --without-dlsym to disable
1053 this feature, or --without-gpm, depending on whether you wish to use
1057 Override type of ospeed variable, which is part of the termcap
1058 compatibility interface. In termcap, this is a 'short', which works
1059 for a wide range of baudrates because ospeed is not the actual speed
1060 but the encoded value, e.g., B9600 would be a small number such as 13.
1061 However the encoding scheme originally allowed for values "only" up to
1062 38400bd. A newer set of definitions past 38400bd is not encoded as
1063 compactly, and is not guaranteed to fit into a short (see the function
1064 cfgetospeed(), which returns a speed_t for this reason). In practice,
1065 applications that required knowledge of the ospeed variable, i.e.,
1066 those using termcap, do not use the higher speeds. Your application
1067 (or system, in general) may or may not.
1069 --with-pc-suffix=SUFFIX
1070 If ".pc" files are installed, optionally add a suffix to the files
1071 and corresponding package names to separate unusual configurations.
1072 If no option value is given (or if it is "none"), no suffix is added.
1075 Add PCRE2 (Perl-compatible regular expressions v2) to the build if it
1076 is available and the user requests it. Assume the application will
1077 otherwise use the POSIX interface.
1079 This is useful for MinGW builds because the usual POSIX interface is
1080 not supplied by the development environment, while ncurses' form
1081 library uses a regular expression feature for one of the field types.
1083 --with-pkg-config=[DIR]
1084 Check for pkg-config, optionally specifying its path.
1086 --with-pkg-config-libdir=[DIR]
1087 If pkg-config was found, override the automatic check for its library
1091 Generate profile-libraries These are named by adding "_p" to the root,
1092 e.g., libncurses_p.a
1095 Link with POSIX threads, set --enable-reentrant. The use_window() and
1096 use_screen() functions will use mutex's, allowing rudimentary support
1097 for multithreaded applications.
1100 Compile-in RCS identifiers. Most of the C files have an identifier.
1102 --with-rel-version=NUM
1103 Override the release version, which may be used in shared library
1104 filenames. This consists of a major and minor version number separated
1105 by ".". Normally the major version number is the same as the ABI
1106 version; some ports have special requirements for compatibility.
1109 Generate shared-libraries. The names given depend on the system for
1110 which you are building, typically using a ".so" suffix, along with
1111 symbolic links that refer to the release version.
1113 NOTE: Unless you override the configure script by setting the $CFLAGS
1114 environment variable, these will not be built with the -g debugging
1117 NOTE: For some configurations, e.g., installing a new version of
1118 ncurses shared libraries on a machine which already has ncurses
1119 shared libraries, you may encounter problems with the linker.
1120 For example, it may prevent you from running the build tree's
1121 copy of tic (for installing the terminfo database) because it
1122 loads the system's copy of the ncurses shared libraries.
1124 In that case, using the misc/shlib script may be helpful, since it
1125 sets $LD_LIBRARY_PATH to point to the build tree, e.g.,
1127 ./misc/shlib make install
1129 Alternatively, for most platforms, the linker accepts a list of
1130 directories which will be searched for libraries at run-time. The
1131 configure script allows you to modify this list using the
1132 RPATH_LIST environment variable. It is a colon-separated list of
1133 directories (default: the "libdir" set via the configure script).
1134 If you set that to put "../lib" first in the list, the linker will
1135 look first at the build-directory, and avoid conflict with libraries
1136 already installed. One drawback to this approach is that libraries
1137 can be accidentally searched in any "../lib" directory.
1139 NOTE: If you use the --with-ada-sharedlib option, you should also
1140 set this option, to ensure that C-language modules needed for the
1141 Ada binding use appropriate compiler options.
1143 --with-shlib-version=XXX
1144 Specify whether to use the release or ABI version for shared libraries.
1145 This is normally chosen automatically based on the type of system
1146 which you are building on. We use it for testing the configure script.
1149 use FreeBSD sysmouse interface provide mouse support on the console.
1151 --with-system-type=XXX
1152 For testing, override the derived host system-type which is used to
1153 decide things such as the linker commands used to build shared
1154 libraries. This is normally chosen automatically based on the type of
1155 system which you are building on. We use it for testing the configure
1158 --with-terminfo-dirs=XXX
1159 Specify a search-list of terminfo directories which will be compiled
1160 into the ncurses library (default: DATADIR/terminfo)
1162 This is a colon-separated list, like the TERMINFO_DIRS environment
1165 --with-termlib[=XXX]
1166 When building the ncurses library, organize this as two parts: the
1167 curses library (libncurses) and the low-level terminfo library
1168 (libtinfo). This is done to accommodate applications that use only
1169 the latter. The terminfo library is about half the size of the total.
1171 If an option value is given, that overrides the name of the terminfo
1172 library. For instance, if the wide-character version is built, the
1173 terminfo library would be named libtinfow. But the libtinfow interface
1174 is upward compatible from libtinfo, so it would be possible to overlay
1175 libtinfo.so with a "wide" version of libtinfow.so by renaming it with
1179 Specify a search-list of termcap files which will be compiled into the
1180 ncurses library (default: /etc/termcap:/usr/share/misc/termcap)
1182 --with-tic-path[=XXX]
1183 Use this option to override the automatic detection of tic in your
1184 $PATH when building fallbacks (see "--with-fallbacks").
1187 When building the ncurses library, build a separate library for
1188 the modules that are used only by the utility programs. Normally
1189 those would be bundled with the termlib or ncurses libraries.
1191 If an option value is given, that overrides the name of the tic
1192 library. As in termlib, there is no ABI difference between the
1193 "wide" libticw.so and libtic.so
1195 NOTE: Overriding the name of the tic library may be useful if you are
1196 also using the --with-termlib option to rename libtinfo. If you are
1197 not doing that, renaming the tic library can result in conflicting
1198 library dependencies for tic and other programs built with the tic
1201 --with-tparm-arg[=XXX]
1202 Override the type used for tparm() arguments, which normally is a
1203 "long". However the function must assume that its arguments can hold a
1204 pointer to char's which is not always workable for 64-bit platforms. A
1205 better choice would be intptr_t, which was not available at the time
1206 tparm's interface was defined.
1208 If the option is not given, this defaults to "long".
1211 Configure the trace() function as part of the all models of the ncurses
1212 library. Normally it is part of the debug (libncurses_g) library only.
1215 For testing, compile with debug option.
1216 This also sets the --disable-leaks option.
1218 --with-versioned-syms[=XXX]
1219 The Solaris, GNU and reportedly some other linkers (ld) accept a
1220 "--version-script" option which tells the linker to annotate the
1221 resulting objects with version identifiers.
1223 Use "objdump -T" on a library to see the annotations.
1225 The configure script attempts to automatically apply a suitable ".map"
1226 file to provide this information for Linux. Solaris mapfiles differ:
1228 a) comments are not accepted
1229 b) wildcards are not accepted, except for a special case of "_*".
1230 c) each symbol listed in the map file must exist in the library
1232 The Solaris limitations conflict with the development goal of providing
1233 a small set of ".map" files as examples, which cover the most common
1234 configurations. Because that coverage is done by merging together
1235 several builds, some symbols will be listed in the the ".map" files
1236 that do not happen to be present in one configuration or another.
1238 The sample ".map" (and ".sym") files are generated using a set of
1239 scripts which build several configurations for each release version,
1240 checking to see which of the "_nc_" symbols can be made local. In
1241 addition to the ncurses libraries and programs, the symbols used
1242 by the "tack" program before version 1.08 are made global.
1244 These sample ".map" files will not cover all possible combinations.
1245 In some cases, e.g., when using the --with-weak-symbols option, you
1246 may prefer to use a different ".map" file by setting this option's
1249 --with-wrap-prefix=XXX
1250 When using the --enable-reentrant option, ncurses redefines variables
1251 that would be global in curses, e.g., LINES, as a macro that calls a
1252 "wrapping" function which fetches the data from the current SCREEN
1253 structure. Normally that function is named by prepending "_nc_" to the
1254 variable's name. The function is technically private (since portable
1255 applications would not refer directly to it). But according to one
1256 line of reasoning, it is not the same type of "private" as functions
1257 which applications should not call even via a macro. This configure
1258 option lets you choose the prefix for these wrapped variables.
1261 Provide a pathname for the X11 rgb file, used by the picsmap program.
1262 This overrides a configure check which usually works, but is needed
1263 due to the lack of standardization for X11's files.
1265 --with-xterm-kbs=XXX
1266 Configure xterm's terminfo entries to use either BS (^H, i.e., ASCII
1267 backspace) or DEL (^?, or 127). XXX can be BS (or bs, 8) or DEL
1270 During installation, the makefile and scripts modifies the "xterm+kbs"
1271 terminfo entry to use this setting.
1274 Suppress the configure script's check for Ada95, do not build the
1275 Ada95 binding and related demo.
1278 Don't install the ncurses header with the name "curses.h". Rather,
1279 install as "ncurses.h" and modify the installed headers and manpages
1282 Likewise, do not install an alias "curses" for the ncurses manpage.
1285 XSI curses declares "bool" as part of the interface. C++ also declares
1286 "bool". Neither specifies the size and type of booleans, but both
1287 insist on the same name. We chose to accommodate this by making the
1288 configure script check for the size and type (e.g., unsigned or signed)
1289 that your C++ compiler uses for booleans. If you do not wish to use
1290 ncurses with C++, use this option to tell the configure script to not
1291 adjust ncurses bool to match C++.
1293 --without-cxx-binding
1294 Suppress the configure script's check for C++, do not build the
1295 C++ binding and related demo.
1298 Disable development options. This does not include those that change
1299 the interface, such as --enable-widec.
1302 Do not use dlsym() to load GPM dynamically.
1305 Tell the configure script to suppress the install of ncurses' manpages.
1308 Tell the configure script to suppress the build of ncurses' application
1309 programs (e.g., tic). The test applications will still be built if you
1310 type "make", though not if you simply do "make install".
1313 Suppress build/install with tack program, if it happens to be
1314 in the same build-tree (tack was moved out of the ncurses source-tree
1318 Tell the configure script to suppress the build of ncurses' test
1322 Tell the configure script to use "xterm-old" for the entry used in
1323 the terminfo database. This will work with variations such as
1324 X11R5 and X11R6 xterm.
1327 COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
1328 --------------------------------------------
1330 Because ncurses implements X/Open Curses, its interface is fairly stable.
1331 That does not mean the interface does not change. Changes are made to the
1332 documented interfaces when we find differences between ncurses and X/Open
1333 or implementations which largely correspond to X/Open (such as Solaris).
1334 We add extensions to those interfaces to solve problems not addressed by
1335 the original curses design, but those must not conflict with the X/Open
1338 Here are some of the major interface changes, and related problems which
1339 you may encounter when building a system with different versions of
1345 + X/Open Curses specifies a "reserved" void* parameter in several
1346 functions, saying that it must be NULL. In this release, if the
1347 parameter is non-NULL, it is interpreted as a point to an integer
1348 containing a color pair. In previous releases, a non-NULL parameter
1349 caused an error return. Portable applications are unaffected. Here
1350 are the functions which have been extended:
1369 + the TERMINAL structure declared in <term.h> has been made opaque,
1370 and its size increased to handle the increased size of color pair
1371 and color value, as well as other numeric capabilities.
1373 A few applications required change, e.g., to use def_prog_mode;
1374 only one application (tack) is known to have a valid reason for
1375 accessing these internal details, and that was addressed by the
1376 release of tack 1.08 in 2017. Internal functions marked as used
1377 by tack will be deprecated in future releases.
1381 + Several new functions were added to manipulate extended color pairs
1382 and color values. These include:
1384 extended_color_content
1385 extended_pair_content
1393 as well as corresponding sp-functions.
1395 + A new terminfo capability "RGB" tells the ncurses library that the
1396 color values are red/green/blue, to eliminate the need for palettes
1397 in that special case for the color_content function.
1399 Added internal functions (other than "_sp" variants):
1401 _nc_export_termtype2
1409 Removed internal functions:
1413 Modified internal functions:
1415 + symbols are used by tic/infocmp/toe:
1416 _nc_align_termtype - change parameters to TERMTYPE2*
1417 _nc_check_termtype2 - change parameter to TERMTYPE2*
1418 _nc_read_file_entry - change parameter to TERMTYPE2*
1419 _nc_read_termtype - change parameter to TERMTYPE2*
1420 _nc_trim_sgr0 - change parameter to TERMTYPE2*
1421 _nc_write_entry - change parameter to TERMTYPE2*
1423 + symbols used only within the library:
1424 _nc_fallback - change return type to TERMTYPE2*
1425 _nc_init_termtype - change parameter to TERMTYPE2*
1430 + The 6.0 ABI modifies the defaults for these configure options:
1438 --with-chtype=uint32_t
1439 --with-mmask_t=uint32_t
1440 --with-tparm-arg=intptr_t
1442 + ncurses supports symbol versioning. If you use this feature, about
1443 half of the "_nc_" private symbols are changed to local symbols.
1445 + a few applications may need to explicitly flush the standard output
1446 when switching between printf's and (curses) printw.
1450 + use_tioctl is an improvement over use_env
1452 + added wgetdelay to support the NCURSES_OPAQUE feature.
1454 Added internal functions (other than "_sp" variants):
1461 Removed internal functions:
1464 Modified internal functions:
1465 _nc_do_color - change parameters from short/bool to int
1466 _nc_keypad - change parameter from bool to int
1467 _nc_setupscreen - change parameter from bool to int
1468 _nc_signal_handler - change parameter from bool to int
1474 + add an alternate library configuration, i.e., "terminal driver" to
1475 support port to Windows, built with MinGW. There are two drivers
1476 (terminfo and Windows console). The terminfo driver works on other
1479 + add a new set of functions which accept a SCREEN* parameter, in
1480 contrast with the original set which use the global value "sp".
1481 By default, these names end with "_sp", and are otherwise
1482 functionally identical with the originals.
1484 In addition to the "_sp" functions, there are a few new functions
1485 associated with this feature: ceiling_panel, ground_panel,
1488 If the library is not built with the sp-funcs extension, there
1489 are no related interface changes.
1491 + add tiparm function based on review of X/Open Curses Issue 7.
1493 + change internal _nc_has_mouse function to public has_mouse function
1497 + add a few more functions to support the NCURSES_OPAQUE feature:
1498 get_escdelay, is_pad, is_subwin
1500 Added internal functions (other than "_sp" variants):
1509 _nc_retrace_int_attr_t
1515 Removed internal functions:
1516 _nc_makenew (some configurations replace by _nc_makenew_sp)
1518 Modified internal functions:
1525 5.7 (November 2, 2008)
1528 + generate linkable stubs for some macros:
1531 + Add new library configuration for tic-library (the non-curses portion
1532 of the ncurses library used for the tic program as well as some
1533 others such as tack. There is no API change, but makefiles would be
1534 changed to use the tic-library built separately.
1536 tack, distributed separately from ncurses, uses some of the internal
1537 _nc_XXX functions, which are declared in the tic.h header file.
1539 The reason for providing this separate library is that none of the
1540 functions in it are suitable for threaded applications.
1542 + Add new library configuration (ncursest, ncurseswt) which provides
1543 rudimentary support for POSIX threads. This introduces opaque
1544 access functions to the WINDOW structure and adds a parameter to
1545 several internal functions.
1547 + move most internal variables (except tic-library) into data blocks
1548 _nc_globals and _nc_prescreen to simplify analysis. Those were
1549 globally accessible, but since they were not part of the documented
1550 API, there is no ABI change.
1552 + changed static tables of strings to be indices into long strings, to
1553 improve startup performance. This changes parameter lists for some
1554 of the internal functions.
1558 + add NCURSES_OPAQUE definition in curses.h to control whether internal
1559 details of the WINDOW structure are visible to an application. This
1560 is always defined when the threaded library is built, and is optional
1561 otherwise. New functions for this: is_cleared, is_idcok, is_idlok,
1562 is_immedok, is_keypad, is_leaveok, is_nodelay, is_notimeout,
1563 is_scrollok, is_syncok, wgetparent and wgetscrreg.
1565 + the threaded library (ncursest) also disallows direct updating of
1566 global curses-level variables, providing functions (via macros) for
1567 obtaining their value. A few of those variables can be modified by
1568 the application, using new functions: set_escdelay, set_tabsize
1570 + added functions use_window() and use_screen() which wrap a mutex
1571 (if threading is configured) around a call to a user-supplied
1574 Added internal functions:
1585 These are used for leak-testing, and are stubs for
1586 ABI compatibility when ncurses is not configured for that
1587 using the --disable-leaks configure script option:
1592 Removed internal functions:
1595 Modified internal functions:
1601 _nc_locale_breaks_acs
1603 _nc_update_screensize
1605 Use new typedef TRIES to replace "struct tries":
1613 5.6 (December 17, 2006)
1616 + generate linkable stubs for some macros:
1618 getbegx, getbegy, getcurx, getcury, getmaxx, getmaxy, getparx,
1621 and (for libncursesw)
1629 Added internal functions:
1643 Also (if using the hashed database configuration):
1658 Removed internal functions:
1661 Modified internal functions:
1668 5.5 (October 10, 2005)
1671 + terminfo installs "xterm-new" as "xterm" entry rather than
1672 "xterm-old" (aka xterm-r6).
1674 + terminfo data is installed using the tic -x option (few systems
1675 still use ncurses 4.2).
1677 + modify C++ binding to work with newer C++ compilers by providing
1678 initializers and using modern casts. Old-style header names are
1679 still used in this release to allow compiling with not-so-old
1682 + form and menu libraries now work with wide-character data.
1683 Applications which bypassed the form library and manipulated the
1684 FIELD.buf data directly will not work properly with libformw, since
1685 that no longer points to an array of char. The set_field_buffer()
1686 and field_buffer() functions translate to/from the actual field
1689 + change SP->_current_attr to a pointer, adjust ifdef's to ensure that
1690 libtinfo.so and libtinfow.so have the same ABI. The reason for this
1691 is that the corresponding data which belongs to the upper-level
1692 ncurses library has a different size in each model.
1694 + winnstr() now returns multibyte character strings for the
1695 wide-character configuration.
1697 + assume_default_colors() no longer requires that use_default_colors()
1700 + data_ahead() now works with wide-characters.
1702 + slk_set() and slk_wset() now accept and store multibyte or
1703 multicolumn characters.
1705 + start_color() now returns OK if colors have already been started.
1706 start_color() also returns ERR if it cannot allocate memory.
1708 + pair_content() now returns -1 for consistency with init_pair() if it
1709 corresponds to the default-color.
1711 + unctrl() now returns null if its parameter does not correspond
1712 to an unsigned char.
1715 Experimental mouse version 2 supports wheel mice with buttons
1716 4 and 5. This requires ABI 6 because it modifies the encoding
1719 Experimental extended colors allows encoding of 256 foreground
1720 and background colors, e.g., with the xterm-256color or
1721 xterm-88color terminfo entries. This requires ABI 6 because
1722 it changes the size of cchar_t.
1724 Added internal functions:
1728 _nc_retrace_cvoid_ptr
1729 _nc_retrace_void_ptr
1732 Removed internal functions:
1735 Modified internal functions:
1740 5.4 (February 8, 2004)
1743 + add the remaining functions for X/Open curses wide-character support.
1744 These are only available if the library is configured using the
1745 --enable-widec option.
1749 + write getyx() and related 2-return macros in terms of getcury(),
1752 + simplify ifdef for bool declaration in curses.h
1754 + modify ifdef's in curses.h that disabled use of __attribute__() for
1755 g++, since recent versions implement the cases which ncurses uses.
1757 + change some interfaces to use const:
1769 Added internal functions:
1772 _nc_is_charable() wide
1773 _nc_locale_breaks_acs()
1776 _nc_to_widechar() wide
1778 _nc_trace_bufcat() debug
1779 _nc_unicode_locale()
1781 Removed internal functions:
1785 Modified internal functions:
1787 _nc_retrace_chtype()
1789 5.3 (October 12, 2002)
1792 + change type for bool used in headers to NCURSES_BOOL, which usually
1793 is the same as the compiler's definition for 'bool'.
1795 + add all but two functions for X/Open curses wide-character support.
1796 These are only available if the library is configured using the
1797 --enable-widec option. Missing functions are
1801 + add environment variable $NCURSES_ASSUMED_COLORS to modify the
1802 assume_default_colors() extension.
1808 Added internal functions:
1809 _nc_altcharset_name() debug
1811 _nc_retrace_bool() debug
1812 _nc_retrace_unsigned() debug
1814 _nc_trace_ttymode() debug
1819 Removed internal functions:
1822 Modified internal functions:
1825 5.2 (October 21, 2000)
1828 + revert termcap ospeed variable to 'short' (see discussion of the
1829 --with-ospeed configure option).
1834 + made the extended terminal capabilities
1835 (configure --enable-tcap-names) a standard feature. This should
1836 be transparent to applications that do not require it.
1838 + removed the trace() function and related trace support from the
1841 + modified curses.h.in, undef'ing some symbols to avoid conflict
1844 Added extensions: assume_default_colors().
1846 5.0 (October 23, 1999)
1849 + implemented the wcolor_set() and slk_color() functions.
1851 + move macro winch to a function, to hide details of struct ldat
1853 + corrected prototypes for slk_* functions, using chtype rather than
1856 + the slk_attr_{set,off,on} functions need an additional void*
1857 parameter according to XSI.
1859 + modified several prototypes to correspond with 1997 version of X/Open
1860 Curses: [w]attr_get(), [w]attr_set(), border_set() have different
1861 parameters. Some functions were renamed or misspelled:
1862 erase_wchar(), in_wchntr(), mvin_wchntr(). Some developers have used
1865 Added extensions: keybound(), curses_version().
1867 Terminfo database changes:
1869 + change translation for termcap 'rs' to terminfo 'rs2', which is
1870 the documented equivalent, rather than 'rs1'.
1872 The problems are subtler in recent releases.
1874 a) This release provides users with the ability to define their own
1875 terminal capability extensions, like termcap. To accomplish this,
1876 we redesigned the TERMTYPE struct (in term.h). Very few
1877 applications use this struct. They must be recompiled to work with
1880 a) If you use the extended terminfo names (i.e., you used configure
1881 --enable-tcap-names), the resulting terminfo database can have some
1882 entries which are not readable by older versions of ncurses. This
1883 is a bug in the older versions:
1885 + the terminfo database stores booleans, numbers and strings in
1886 arrays. The capabilities that are listed in the arrays are
1887 specified by X/Open. ncurses recognizes a number of obsolete and
1888 extended names which are stored past the end of the specified
1891 + a change to read_entry.c in 951001 made the library do an lseek()
1892 call incorrectly skipping data which is already read from the
1893 string array. This happens when the number of strings in the
1894 terminfo data file is greater than STRCOUNT, the number of
1895 specified and obsolete or extended strings.
1897 + as part of alignment with the X/Open final specification, in the
1898 990109 patch we added two new terminfo capabilities:
1899 set_a_attributes and set_pglen_inch). This makes the indices for
1900 the obsolete and extended capabilities shift up by 2.
1902 + the last two capabilities in the obsolete/extended list are memu
1903 and meml, which are found in most terminfo descriptions for xterm.
1905 When trying to read this terminfo entry, the spurious lseek()
1906 causes the library to attempt to read the final portion of the
1907 terminfo data (the text of the string capabilities) 4 characters
1908 past its starting point, and reads 4 characters too few. The
1909 library rejects the data, and applications are unable to
1910 initialize that terminal type.
1912 FIX: remove memu and meml from the xterm description. They are
1913 obsolete, not used by ncurses. (It appears that the feature was
1914 added to xterm to make it more like hpterm).
1916 This is not a problem if you do not use the -x option of tic to
1917 create a terminfo database with extended names. Note that the
1918 user-defined terminal capabilities are not affected by this bug,
1919 since they are stored in a table after the older terminfo data ends,
1920 and are invisible to the older libraries.
1922 c) Some developers did not wish to use the C++ binding, and used the
1923 configure --without-cxx option. This causes problems if someone
1924 uses the ncurses library from C++ because that configure test
1925 determines the type for C++'s bool and makes ncurses match it, since
1926 both C++ and curses are specified to declare bool. Calling ncurses
1927 functions with the incorrect type for bool will cause execution
1928 errors. In 5.0 we added a configure option "--without-cxx-binding"
1929 which controls whether the binding itself is built and installed.
1934 + correct prototype for termattrs() as per XPG4 version 2.
1936 + add placeholder prototypes for color_set(), erasewchar(),
1937 term_attrs(), wcolor_set() as per XPG4 version 2.
1939 + add macros getcur[xy] getbeg[xy] getpar[xy], which are defined in
1942 New extensions: keyok() and define_key().
1944 Terminfo database changes:
1946 + corrected definition in curses.h for ACS_LANTERN, which was 'I'
1951 We added these extensions: use_default_colors(). Also added
1952 configure option --enable-const, to support the use of const where
1953 X/Open should have, but did not, specify.
1955 The terminfo database content changed the representation of color for
1956 most entries that use ANSI colors. SVr4 curses treats the setaf/setab
1957 and setf/setb capabilities differently, interchanging the red/blue
1958 colors in the latter.
1960 4.0 (December 24, 1996)
1962 We bumped to version 4.0 because the newly released Linux dynamic
1963 loader (ld.so.1.8.5) did not load shared libraries whose ABI and REL
1964 versions were inconsistent. At that point, ncurses ABI was 3.4 and the
1965 REL was 1.9.9g, so we made them consistent.
1967 1.9.9g (December 1, 1996)
1969 This fixed most of the problems with 1.9.9e, and made these interface
1972 + remove tparam(), which had been provided for compatibility with
1973 some termcap. tparm() is standard, and does not conflict with
1974 application's fallback for missing tparam().
1976 + turn off hardware echo in initscr(). This changes the sense of the
1977 echo() function, which was initialized to echoing rather than
1978 nonechoing (the latter is specified). There were several other
1979 corrections to the terminal I/O settings which cause applications to
1982 + implemented several functions (such as attr_on()) which were
1983 available only as macros.
1985 + corrected several typos in curses.h.in (i.e., the mvXXXX macros).
1987 + corrected prototypes for delay_output(),
1988 has_color, immedok() and idcok().
1990 + corrected misspelled getbkgd(). Some applications used the
1993 + added _yoffset to WINDOW. The size of WINDOW does not impact
1994 applications, since they use only pointers to WINDOW structs.
1996 These changes were made to the terminfo database:
1998 + removed boolean 'getm' which was available as an extended name.
2000 We added these extensions: wresize(), resizeterm(), has_key() and
2003 1.9.9e (March 24, 1996)
2005 not recommended (a last-minute/untested change left the forms and
2006 menus libraries unusable since they do not repaint the screen).
2007 Foreground/background colors are combined incorrectly, working properly
2008 only on a black background. When this was released, the X/Open
2009 specification was available only in draft form.
2011 Some applications (such as lxdialog) were "fixed" to work with the
2012 incorrect color scheme.
2015 IF YOU ARE A SYSTEM INTEGRATOR:
2016 ------------------------------
2018 Configuration and Installation:
2020 On platforms where ncurses is assumed to be installed in /usr/lib,
2021 the configure script uses "/usr" as a default. These include any
2022 that use the Linux kernel, as well as these special cases:
2024 FreeBSD, NetBSD, OpenBSD, Cygwin, MinGW
2026 For other platforms, the default is "/usr/local". See the discussion
2027 of the "--disable-overwrite" option.
2029 The location of the terminfo is set indirectly by the "--datadir"
2030 configure option, e.g., /usr/share/terminfo, given a datadir of
2031 /usr/share. You may want to override this if you are installing
2032 ncurses libraries in nonstandard locations, but wish to share the
2035 Normally the ncurses library is configured in a pure-terminfo mode;
2036 that is, with the --disable-termcap option. This makes the ncurses
2037 library smaller and faster. The ncurses library includes a termcap
2038 emulation that queries the terminfo database, so even applications that
2039 use raw termcap to query terminal characteristics will win (providing
2040 you recompile and relink them!).
2042 If you must configure with termcap fallback enabled, you may also wish
2043 to use the --enable-getcap option. This speeds up termcap-based
2044 startups, at the expense of not allowing personal termcap entries to
2045 reference the terminfo tree. See comments in
2046 ncurses/tinfo/read_termcap.c for further details.
2048 Note that if you have $TERMCAP set, ncurses will use that value
2049 to locate termcap data. In particular, running from xterm will
2050 set $TERMCAP to the contents of the xterm's termcap entry.
2051 If ncurses sees that, it will not examine /etc/termcap.
2055 The terminfo file assumes that Shift-Tab generates \E[Z (the ECMA-48
2056 reverse-tabulation sequence) rather than ^I. Here are the loadkeys -d
2057 mappings that will set this up:
2059 keycode 15 = Tab Tab
2060 alt keycode 15 = Meta_Tab
2061 shift keycode 15 = F26
2062 string F26 ="\033[Z"
2064 Naming the Console Terminal
2066 In various systems there has been a practice of designating the system
2067 console driver type as `console'. Please do not do this! It
2068 complicates peoples' lives, because it can mean that several different
2069 terminfo entries from different operating systems all logically want to
2070 be called `console'.
2072 Please pick a name unique to your console driver and set that up
2073 in the /etc/inittab table or local equivalent. Send the entry to the
2074 terminfo maintainer (listed in the misc/terminfo file) to be included
2075 in the terminfo file, if it's not already there. See the
2076 term(7) manual page included with this distribution for more on
2077 conventions for choosing type names.
2079 Here are some recommended primary console names:
2081 linux -- Linux console driver
2086 If you are responsible for integrating ncurses for one of these
2087 distributions, please either use the recommended name or get back
2088 to us explaining why you don't want to, so we can work out nomenclature
2089 that will make users' lives easier rather than harder.
2092 RECENT XTERM VERSIONS:
2093 ---------------------
2095 The terminfo database file included with this distribution assumes you
2096 are running a modern xterm based on XFree86 (i.e., xterm-new). The
2097 earlier X11R6 entry (xterm-r6) and X11R5 entry (xterm-r5) is provided
2098 as well. See the --without-xterm-new configure script option if you
2099 are unable to update your system.
2102 CONFIGURING FALLBACK ENTRIES:
2103 ----------------------------
2105 In order to support operation of ncurses programs before the terminfo
2106 tree is accessible (that is, in single-user mode or at OS installation
2107 time) the ncurses library can be compiled to include an array of
2108 pre-fetched fallback entries. This must be done on a machine which
2109 has ncurses' infocmp and terminfo database installed (as well as
2110 ncurses' tic and infocmp programs).
2112 These entries are checked by setupterm() only when the conventional
2113 fetches from the terminfo tree and the termcap fallback (if configured)
2114 have been tried and failed. Thus, the presence of a fallback will not
2115 shadow modifications to the on-disk entry for the same type, when that
2116 entry is accessible.
2118 By default, there are no entries on the fallback list. After you have
2119 built the ncurses suite for the first time, you can change the list
2120 (the process needs infocmp(1)). To do so, use the script
2121 ncurses/tinfo/MKfallback.sh. The configure script option
2122 --with-fallbacks does this (it accepts a comma-separated list of the
2123 names you wish, and does not require a rebuild).
2125 If you wanted (say) to have linux, vt100, and xterm fallbacks, you
2126 might use the commands
2129 tinfo/MKfallback.sh \
2131 ../misc/terminfo.src \
2134 linux vt100 xterm >fallback.c
2136 The first four parameters of the script are normally supplied by
2137 the configured makefiles via the "--with-fallbacks" option. They
2140 1) the location of the terminfo database
2141 2) the source for the terminfo entries
2142 3) the location of the tic program, used to create a terminfo
2144 4) the location of the infocmp program, used to print a terminfo
2147 Then just rebuild and reinstall the library as you would normally.
2148 You can restore the default empty fallback list with
2150 tinfo/MKfallback.sh \
2152 ../misc/terminfo.src \
2157 The overhead for an empty fallback list is one trivial stub function.
2158 Any non-empty fallback list is const-ed and therefore lives in sharable
2159 text space. You can look at the comment trailing each initializer in
2160 the generated ncurses/fallback.c file to see the core cost of the
2161 fallbacks. A good rule of thumb for modern vt100-like entries is that
2162 each one will cost about 2.5K of text space.
2165 BSD CONVERSION NOTES:
2166 --------------------
2168 If you need to support really ancient BSD programs, you probably
2169 want to configure with the --enable-bsdpad option. What this does
2170 is enable code in tputs() that recognizes a numeric prefix on a
2171 capability as a request for that much trailing padding in milliseconds.
2172 There are old BSD programs that do things like tputs("50").
2174 (If you are distributing ncurses as a support-library component of
2175 an application you probably want to put the remainder of this section
2176 in the package README file.)
2178 The following note applies only if you have configured ncurses with
2181 ------------------------------- CUT HERE --------------------------------
2183 If you are installing this application privately (either because you
2184 have no root access or want to experiment with it before doing a root
2185 installation), there are a couple of details you need to be aware of.
2186 They have to do with the ncurses library, which uses terminfo rather
2187 than termcap for describing terminal characteristics.
2189 Though the ncurses library is terminfo-based, it can interpret your
2190 TERMCAP variable (if present), any local termcap files you reference
2191 through it, and the system termcap file. However, to avoid slowing
2192 down your application startup, it does this only once per terminal type!
2194 The first time you load a given terminal type from your termcap
2195 database, the library initialization code will automatically write it
2196 in terminfo format to a subdirectory under $HOME/.terminfo. After
2197 that, the initialization code will find it there and do a (much
2198 faster) terminfo fetch.
2200 Usually, all this means is that your home directory will silently grow
2201 an invisible .terminfo subdirectory which will get filled in with
2202 terminfo descriptions of terminal types as you invoke them. If anyone
2203 ever installs a global terminfo tree on your system, this will quietly
2204 stop happening and your $HOME/.terminfo will become redundant.
2206 The objective of all this logic is to make converting from BSD termcap
2207 as painless as possible without slowing down your application (termcap
2208 compilation is expensive).
2210 If you don't have a TERMCAP variable or custom personal termcap file,
2211 you can skip the rest of this dissertation.
2213 If you *do* have a TERMCAP variable and/or a custom personal termcap file
2214 that defines a terminal type, that definition will stop being visible
2215 to this application after the first time you run it, because it will
2216 instead see the terminfo entry that it wrote to $HOME/terminfo the
2219 Subsequently, editing the TERMCAP variable or personal TERMCAP file
2220 will have no effect unless you explicitly remove the terminfo entry
2221 under $HOME/terminfo. If you do that, the entry will be recompiled
2222 from your termcap resources the next time it is invoked.
2224 To avoid these complications, use infocmp(1) and tic(1) to edit the
2225 terminfo directory directly.
2227 ------------------------------- CUT HERE --------------------------------
2229 USING NCURSES WITH AFS:
2230 AFS treats each directory as a separate logical filesystem, you
2231 can't hard-link across them. The --enable-symlinks option copes
2232 with this by making tic use symbolic links.
2234 USING NCURSES WITH GPM:
2235 Ncurses 4.1 and up can be configured to use GPM (General Purpose Mouse)
2236 which is used with Linux console. Be aware that GPM is commonly
2237 installed as a shared library which contains a wrapper for the curses
2238 wgetch() function (libcurses.o). Some integrators have simplified
2239 linking applications by combining all or part of libcurses.so into the
2240 libgpm.so file, producing symbol conflicts with ncurses (specifically
2241 the wgetch function). This was originally the BSD curses, but
2242 generally whatever curses library exists on the system.
2244 You may be able to work around this problem by linking as follows:
2246 cc -o foo foo.o -lncurses -lgpm -lncurses
2248 but the linker may not cooperate, producing mysterious errors.
2249 See the FAQ, as well as the discussion under the --with-gpm option:
2251 https://invisible-island.net/ncurses/ncurses.faq.html#using_gpm_lib
2253 BUILDING NCURSES WITH A CROSS-COMPILER
2254 Ncurses can be built with a cross-compiler. Some parts must be built
2255 with the host's compiler since they are used for building programs
2256 (e.g., ncurses/make_hash and ncurses/make_keys) that generate tables
2257 that are compiled into the ncurses library. The essential thing to do
2258 is set the BUILD_CC environment variable to your host's compiler, and
2259 run the configure script configuring for the cross-compiler.
2261 The configure options --with-build-cc, etc., are provided to make this
2262 simpler. Since make_hash and make_keys use only ANSI C features, it
2263 is normally not necessary to provide the other options such as
2264 --with-build-libs, but they are provided for completeness.
2266 Note that all of the generated source-files which are part of ncurses
2267 will be made if you use
2271 This would be useful in porting to an environment which has little
2272 support for the tools used to generate the sources, e.g., sed, awk and
2275 When ncurses has been successfully cross-compiled, you may want to use
2276 "make install" (with a suitable target directory) to construct an
2277 install tree. Note that in this case (as with the --with-fallbacks
2278 option), ncurses uses the development platform's tic to do the
2279 "make install.data" portion.
2281 The system's tic program is used to install the terminal database,
2282 even for cross-compiles. For best results, the tic program should
2283 be from the most current version of ncurses.
2286 Send any feedback to the ncurses mailing list at
2287 bug-ncurses@gnu.org. To subscribe send mail to
2288 bug-ncurses-request@gnu.org with body that reads:
2289 subscribe ncurses <your-email-address-here>
2291 The Hacker's Guide in the doc directory includes some guidelines
2292 on how to report bugs in ways that will get them fixed most quickly.