ncurses 6.4 - patch 20231125

[ncurses.git] / man / tset.1

.\"***************************************************************************
.\" Copyright 2018-2022,2023 Thomas E. Dickey                                *
.\" Copyright 1998-2016,2017 Free Software Foundation, Inc.                  *
.\"                                                                          *
.\" Permission is hereby granted, free of charge, to any person obtaining a  *
.\" copy of this software and associated documentation files (the            *
.\" "Software"), to deal in the Software without restriction, including      *
.\" without limitation the rights to use, copy, modify, merge, publish,      *
.\" distribute, distribute with modifications, sublicense, and/or sell       *
.\" copies of the Software, and to permit persons to whom the Software is    *
.\" furnished to do so, subject to the following conditions:                 *
.\"                                                                          *
.\" The above copyright notice and this permission notice shall be included  *
.\" in all copies or substantial portions of the Software.                   *
.\"                                                                          *
.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS  *
.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF               *
.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.   *
.\" IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,   *
.\" DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR    *
.\" OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR    *
.\" THE USE OR OTHER DEALINGS IN THE SOFTWARE.                               *
.\"                                                                          *
.\" Except as contained in this notice, the name(s) of the above copyright   *
.\" holders shall not be used in advertising or otherwise to promote the     *
.\" sale, use or other dealings in this Software without prior written       *
.\" authorization.                                                           *
.\"***************************************************************************
.\"
.\" $Id: tset.1,v 1.75 2023/11/25 14:32:36 tom Exp $
.TH @TSET@ 1 2023-11-25 "ncurses 6.4" "User commands"
.ie \n(.g \{\
.ds `` \(lq
.ds '' \(rq
.ds ^  \(ha
.\}
.el \{\
.ie t .ds `` ``
.el   .ds `` ""
.ie t .ds '' ''
.el   .ds '' ""
.ds       ^  ^
.\}
.
.de bP
.ie n  .IP \(bu 4
.el    .IP \(bu 2
..
.
.ds d @TERMINFO@
.SH NAME
\fB\%@TSET@\fP,
\fB\%@RESET@\fP \-
initialize or reset terminal state
.SH SYNOPSIS
\fB@TSET@\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal-type\fP]
.br
\fB@RESET@\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal-type\fP]
.SH DESCRIPTION
.SS tset - initialization
This program initializes terminals.
.PP
First, \fB@TSET@\fP retrieves the current terminal mode settings
for your terminal.
It does this by successively testing
.bP
the standard error,
.bP
standard output,
.bP
standard input and
.bP
ultimately \*(``/dev/tty\*(''
.PP
to obtain terminal settings.
Having retrieved these settings, \fB@TSET@\fP remembers which
file descriptor to use when updating settings.
.PP
Next, \fB@TSET@\fP determines the type of terminal that you are using.
This determination is done as follows, using the first terminal type found.
.PP
1. The \fBterminal\fP argument specified on the command line.
.PP
2. The value of the \fBTERM\fP environmental variable.
.PP
3. (BSD systems only.) The terminal type associated with the standard
error output device in the \fI/etc/ttys\fP file.
(On System\-V-like Unices and systems using that convention,
\fBgetty\fP(1) does this job by setting
\fBTERM\fP according to the type passed to it by \fI/etc/inittab\fP.)
.PP
4. The default terminal type, \*(``unknown\*('',
is not suitable for curses applications.
.PP
If the terminal type was not specified on the command-line, the \fB\-m\fP
option mappings are then applied;
see subsection \*(``Terminal Type Mapping\*(''.
Then, if the terminal type begins with a question mark (\*(``?\*(''), the
user is prompted for confirmation of the terminal type.
An empty
response confirms the type, or, another type can be entered to specify
a new type.
Once the terminal type has been determined,
the terminal description for the terminal is retrieved.
If no terminal description is found
for the type, the user is prompted for another terminal type.
.PP
Once the terminal description is retrieved,
.bP
if the \*(``\fB\-w\fP\*('' option is enabled, \fB@TSET@\fP may update
the terminal's window size.
.IP
If the window size cannot be obtained from the operating system,
but the terminal description (or environment, e.g., \fBLINES\fP
and \fBCOLUMNS\fP variables specify this),
use this to set the operating system's notion of the window size.
.bP
if the \*(``\fB\-c\fP\*('' option is enabled,
the backspace, interrupt and line kill characters
(among many other things) are set
.bP
unless the \*(``\fB\-I\fP\*('' option is enabled,
the terminal
and tab \fIinitialization\fP strings are sent to the standard error output,
and \fB@TSET@\fP waits one second (in case a hardware reset was issued).
.bP
Finally, if the erase, interrupt and line kill characters have changed,
or are not set to their default values, their values are displayed to the
standard error output.
.SS reset - reinitialization
When invoked as \fB@RESET@\fP, \fB@TSET@\fP sets the terminal
modes to \*(``sane\*('' values:
.bP
sets cooked and echo modes,
.bP
turns off cbreak and raw modes,
.bP
turns on newline translation and
.bP
resets any unset special characters to their default values
.PP
before
doing the terminal initialization described above.
Also, rather than using the terminal \fIinitialization\fP strings,
it uses the terminal \fIreset\fP strings.
.PP
The \fB@RESET@\fP command is useful
after a program dies leaving a terminal in an abnormal state:
.bP
you may have to type
.sp
    \fI<LF>\fB@RESET@\fI<LF>\fR
.sp
(the line-feed character is normally control-J) to get the terminal
to work, as carriage-return may no longer work in the abnormal state.
.bP
Also, the terminal will often not echo the command.
.SS "Setting the Environment"
It is often desirable to enter the terminal type and information about
the terminal's capabilities into the shell's environment.
This is done using the \fB\-s\fP option.
.PP
When the \fB\-s\fP option is specified, the commands to enter the information
into the shell's environment are written to the standard output.
If
the \fBSHELL\fP environmental variable ends in \*(``csh\*('', the commands
are for \fBcsh\fP, otherwise, they are for \fBsh\fP(1).
Note, the \fBcsh\fP commands set and unset the shell variable
\fBnoglob\fP, leaving it unset.
The following line in the \fB.login\fP
or \fB.profile\fP files will initialize the environment correctly:
.sp
    eval \(ga@TSET@ \-s options ... \(ga
.
.SS "Terminal Type Mapping"
When the terminal is not hardwired into the system (or the current
system information is incorrect) the terminal type derived from the
\fI/etc/ttys\fP file or the \fBTERM\fP environmental variable is often
something generic like \fBnetwork\fP, \fBdialup\fP, or \fBunknown\fP.
When \fB@TSET@\fP is used in a startup script it is often desirable to
provide information about the type of terminal used on such ports.
.PP
The \fB\-m\fP options maps
from some set of conditions to a terminal type, that is, to
tell \fB@TSET@\fP
\*(``If I'm on this port at a particular speed,
guess that I'm on that kind of terminal\*(''.
.PP
The argument to the \fB\-m\fP option consists of an optional port type, an
optional operator, an optional baud rate specification, an optional
colon (\*(``:\*('') character and a terminal type.
The port type is a
string (delimited by either the operator or the colon character).
The operator may be any combination of
\*(``>\*('',
\*(``<\*('',
\*(``@\*('',
and \*(``!\*('';
\*(``>\*('' means greater than,
\*(``<\*('' means less than,
\*(``@\*('' means equal to and
\*(``!\*('' inverts the sense of the test.
The baud rate is specified as a number and is compared with the speed
of the standard error output (which should be the control terminal).
The terminal type is a string.
.PP
If the terminal type is not specified on the command line, the \fB\-m\fP
mappings are applied to the terminal type.
If the port type and baud
rate match the mapping, the terminal type specified in the mapping
replaces the current type.
If more than one mapping is specified, the
first applicable mapping is used.
.PP
For example, consider the following mapping: \fBdialup>9600:vt100\fP.
The port type is dialup , the operator is >, the baud rate
specification is 9600, and the terminal type is vt100.
The result of
this mapping is to specify that if the terminal type is \fBdialup\fP,
and the baud rate is greater than 9600 baud, a terminal type of
\fBvt100\fP will be used.
.PP
If no baud rate is specified, the terminal type will match any baud rate.
If no port type is specified, the terminal type will match any port type.
For example, \fB\-m dialup:vt100 \-m :?xterm\fP
will cause any dialup port, regardless of baud rate, to match the terminal
type vt100, and any non-dialup port type to match the terminal type ?xterm.
Note, because of the leading question mark, the user will be
queried on a default port as to whether they are actually using an xterm
terminal.
.PP
No whitespace characters are permitted in the \fB\-m\fP option argument.
Also, to avoid problems with meta-characters, it is suggested that the
entire \fB\-m\fP option argument be placed within single quote characters,
and that \fBcsh\fP users insert a backslash character (\*(``\e\*('') before
any exclamation marks (\*(``!\*('').
.SH OPTIONS
The options are as follows:
.TP 5
.B \-c
Set control characters and modes.
.TP 5
.BI \-e\  ch
Set the erase character to \fIch\fP.
.TP
.B \-I
Do not send the terminal or tab initialization strings to the terminal.
.TP
.BI \-i\  ch
Set the interrupt character to \fIch\fP.
.TP
.BI \-k\  ch
Set the line kill character to \fIch\fP.
.TP
.BI \-m\  mapping
Specify a mapping from a port type to a terminal;
see subsection \*(``Terminal Type Mapping\*(''.
.TP
.B \-Q
Do not display any values for the erase, interrupt and line kill characters.
Normally \fB@TSET@\fP displays the values for control characters which
differ from the system's default values.
.TP
.B \-q
The terminal type is displayed to the standard output, and the terminal is
not initialized in any way.
The option \*(``\-\*('' by itself is equivalent but archaic.
.TP
.B \-r
Print the terminal type to the standard error output.
.TP
.B \-s
Print the sequence of shell commands to initialize the environment variable
\fBTERM\fP to the standard output;
see subsection \*(``Setting the Environment\*(''.
.TP
.B \-V
reports the version of ncurses which was used in this program, and exits.
.TP
.B \-w
Resize the window to match the size deduced via \fBsetupterm\fP(3X).
Normally this has no effect,
unless \fBsetupterm\fP is not able to detect the window size.
.PP
The arguments for the \fB\-e\fP, \fB\-i\fP, and \fB\-k\fP
options may either be entered as actual characters
or by using the \*(``hat\*(''
notation, i.e., control-h may be specified as \*(``\*^H\*('' or \*(``\*^h\*(''.
.PP
If neither \fB\-c\fP or \fB\-w\fP is given, both options are assumed.
.SH ENVIRONMENT
The \fB@TSET@\fP command uses these environment variables:
.TP 5
SHELL
tells \fB@TSET@\fP whether to initialize \fBTERM\fP using \fBsh\fP(1) or
\fBcsh\fP(1) syntax.
.TP 5
TERM
Denotes your terminal type.
Each terminal type is distinct, though many are similar.
.TP 5
TERMCAP
may denote the location of a termcap database.
If it is not an absolute pathname, e.g., begins with a \*(``/\*('',
\fB@TSET@\fP removes the variable from the environment before looking
for the terminal description.
.SH FILES
.TP 5
/etc/ttys
system port name to terminal type mapping database (BSD versions only).
.TP
.I \*d
compiled terminal description database directory
.SH PORTABILITY
Neither IEEE Std 1003.1/The Open Group Base Specifications Issue 7
(POSIX.1-2008) nor
X/Open Curses Issue 7 documents \fB@TSET@\fP or \fB@RESET@\fP.
.PP
The AT&T \fBtput\fP utility (AIX, HP-UX, Solaris)
incorporated the terminal-mode manipulation as well as termcap-based features
such as resetting tabstops from \fBtset\fP in BSD (4.1c),
presumably with the intention of making \fBtset\fP obsolete.
However, each of those systems still provides \fBtset\fP.
In fact, the commonly-used \fBreset\fP utility
is always an alias for \fBtset\fP.
.PP
The \fB@TSET@\fP utility provides for backward-compatibility with BSD
environments (under most modern Unices, \fB/etc/inittab\fP and \fBgetty\fP(1)
can set \fBTERM\fP appropriately for each dial-up line; this obviates what was
\fB@TSET@\fP's most important use).
This implementation behaves like 4.4BSD
\fBtset\fP, with a few exceptions specified here.
.PP
A few options are different
because the \fBTERMCAP\fP variable
is no longer supported under terminfo-based \fBncurses\fP:
.bP
The \fB\-S\fP option of BSD \fBtset\fP no longer works;
it prints an error message to the standard error and dies.
.bP
The \fB\-s\fP option only sets \fBTERM\fP, not \fBTERMCAP\fP.
.PP
There was an undocumented 4.4BSD feature
that invoking \fBtset\fP via a link named
\*(``TSET\*('' (or via any other name beginning with an upper-case letter)
set the terminal to use upper-case only.
This feature has been omitted.
.PP
The \fB\-A\fP, \fB\-E\fP, \fB\-h\fP, \fB\-u\fP and \fB\-v\fP
options were deleted from the \fB@TSET@\fP
utility in 4.4BSD.
None of them were documented in 4.3BSD and all are
of limited utility at best.
The \fB\-a\fP, \fB\-d\fP, and \fB\-p\fP options are similarly
not documented or useful, but were retained as they appear to be in
widespread use.
It is strongly recommended that any usage of these
three options be changed to use the \fB\-m\fP option instead.
The \fB\-a\fP, \fB\-d\fP, and \fB\-p\fP options
are therefore omitted from the usage summary above.
.PP
Very old systems, e.g., 3BSD, used a different terminal driver which
was replaced in 4BSD in the early 1980s.
To accommodate these older systems, the 4BSD \fB@TSET@\fP provided a
\fB\-n\fP option to specify that the new terminal driver should be used.
This implementation does not provide that choice.
.PP
It is still permissible to specify the \fB\-e\fP, \fB\-i\fP,
and \fB\-k\fP options without arguments,
although it is strongly recommended that such usage be fixed to
explicitly specify the character.
.PP
As of 4.4BSD,
executing \fB@TSET@\fP as \fB@RESET@\fP no longer implies the \fB\-Q\fP option.
Also, the interaction between the \- option and the \fIterminal\fP
argument in some historic implementations of \fB@TSET@\fP has been removed.
.PP
The \fB\-c\fP and \fB\-w\fP options are not found in earlier implementations.
However, a different window size-change feature was provided in 4.4BSD.
.bP
In 4.4BSD, \fBtset\fP uses the window size from the termcap description
to set the window size if \fBtset\fP is not able to obtain the window
size from the operating system.
.bP
In ncurses, \fB@TSET@\fP obtains the window size using
\fBsetupterm\fP, which may be from
the operating system,
the \fBLINES\fP and \fBCOLUMNS\fP environment variables or
the terminal description.
.PP
Obtaining the window size from the terminal description is common to
both implementations, but considered obsolescent.
Its only practical use is for hardware terminals.
Generally speaking, a window size would be unset only if there were
some problem obtaining the value from the operating system
(and \fBsetupterm\fP would still fail).
For that reason, the \fBLINES\fP and \fBCOLUMNS\fP environment variables
may be useful for working around window-size problems.
Those have the drawback that if the window is resized,
those variables must be recomputed and reassigned.
To do this more easily, use the \fBresize\fP(1) program.
.SH HISTORY
A \fB\%reset\fP command written by Kurt Shoens appeared in 1BSD
(March 1978).
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=1BSD/s6/reset.c
It set the \fIerase\fP and \fIkill\fP characters
to \fB\*^H\fP (backspace) and \fB@\fP respectively.
Mark Horton improved this \fB\%reset\fP in 3BSD
(October 1979),
adding \fIintr\fP,
\fIquit\fP,
\fIstart\fP/\fIstop\fP,
and \fIeof\fP
characters as well as changing the program to avoid modifying any user
settings.
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=3BSD/usr/src/cmd/\
.\"   reset.c
That version of \fB\%reset\fP did not use \fI\%termcap\fP.
.PP
Eric Allman wrote a distinct \fBtset\fP command for 1BSD,
using a forerunner of \fI\%termcap\fP called \fI\%ttycap\fP.
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=1BSD/s6/tset.c
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=1BSD/man7/ttycap.7
Allman's comments in the source code indicate
that he began work in October 1977,
continuing development over the next few years.
By late 1979,
it had migrated to \fI\%termcap\fP and handled the \fI\%TERMCAP\fP
variable.
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=3BSD/usr/src/cmd/\
.\"   tset/tset.c
Later comments indicate that \fBtset\fP was modified in September 1980
to use logic copied from the 3BSD \*(``reset\*('' program when it was
invoked as \fB\%reset\fP.
.\" https://minnie.tuhs.org/cgi-bin/utree.pl?file=2.9BSD/usr/src/ucb/\
.\"   tset/tset.c
This version appeared in 4.1cBSD, \" and backported to 2.9BSD
late in 1982.
Other developers such as Keith Bostic and Jim Bloom continued to modify
\fBtset\fP until 4.4BSD was released in 1993.
.PP
The \fI\%ncurses\fP implementation was lightly adapted from the 4.4BSD
sources to use the \fI\%terminfo\fP API by Eric S.\& Raymond
<esr@snark.thyrsus.com>.
.SH SEE ALSO
\fB\%csh\fP(1),
\fB\%sh\fP(1),
\fB\%stty\fP(1),
\fB\%curs_terminfo\fP(3X),
\fB\%tty\fP(4),
\fB\%terminfo\fP(5),
\fB\%ttys\fP(5),
\fB\%environ\fP(7)