1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2018/10/27 23:10:56 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=\r, cud1=\n, ind=\n,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
314 kcud1=\n, nel=\r\n, .kbs=^H,
318 bel=^G, cr=\r, cud1=\n, ind=\n,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=\n, bel=^G, cud1=\n,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
337 ansi+local1|ANSI normal-mode cursor-keys,
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
339 ansi+local|ANSI normal-mode parameterized cursor-keys,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
342 ansi+tabs|ANSI tab-stops,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
344 ansi+inittabs|ANSI initial tab-stops,
346 ansi+erase|ANSI clear screen/line,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
348 ansi+rca|ANSI relative cursor-addressing,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
350 ansi+cup|ANSI absolute cursor-addressing,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
352 ansi+rep|ANSI repeat-character,
353 rep=%p1%c\E[%p2%{1}%-%db,
354 ansi+idl1|ANSI insert/delete one line,
356 ansi+idl|ANSI insert/delete lines,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
358 ansi+idc1|ANSI insert/delete one character,
359 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
360 ansi+idc|ANSI insert/delete characters,
361 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
362 ansi+arrows|ANSI normal-mode cursor-keys,
363 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
365 ansi+sgr|ANSI graphic renditions,
366 blink=\E[5m, invis=\E[8m, rev=\E[7m,
367 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
369 ansi+sgrso|ANSI standout only,
370 rmso=\E[m, smso=\E[7m,
371 ansi+sgrul|ANSI underline only,
372 rmul=\E[m, smul=\E[4m,
373 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
375 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
377 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
378 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
380 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
382 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
383 ansi+csr|ANSI scroll-region plus cursor save & restore,
384 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
386 # The normal (ANSI) flavor of "media copy" building block asserts that
387 # characters sent to the printer do not echo on the screen. DEC terminals
388 # can also be put into autoprinter mode, where each line is sent to the
389 # printer as you move off that line, e.g., by a carriage return.
390 ansi+pp|ANSI printer port,
392 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
393 dec+pp|DEC autoprinter mode,
394 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
396 # The IBM PC alternate character set. Plug this into any Intel console entry.
397 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
398 # ROM graphics for control characters such as the diamond, up- and down-arrow.
399 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
400 # will work with any Intel console, they all seem to have inherited \E[11m
401 # from the ANSI.SYS de-facto standard.
402 klone+acs|alternate character set for ansi.sys displays,
403 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
404 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
405 \301w\302x\263y\363z\362{\343|\330}\234~\376,
406 rmacs=\E[10m, smacs=\E[11m,
408 # Highlight controls corresponding to the ANSI.SYS standard. Most
409 # console drivers for Intel boxes obey these. Makes the same assumption
410 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
411 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
412 klone+sgr|attribute control for ansi.sys displays,
413 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
414 rmso=\E[m, rmul=\E[m,
415 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
417 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
420 # Most Intel boxes do not treat "invis" (invisible) text.
421 klone+sgr8|attribute control for ansi.sys displays,
423 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
427 # Highlight controls corresponding to the ANSI.SYS standard. *All*
428 # console drivers for Intel boxes obey these. Does not assume \E[11m will
429 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
430 # diamond and arrow characters under curses.
431 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
432 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
434 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
435 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
436 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
439 # KOI8-R (RFC1489) acs (alternate character set)
440 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
441 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
442 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
443 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
444 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
446 rmacs=\E[10m, smacs=\E[11m,
448 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
449 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
450 # but equivalent strings that don't rely on that coincidence:
451 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
452 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
453 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
454 # They match a subset of ECMA-48.
455 klone+color|color control for ansi.sys and ISO6429-compatible displays,
456 colors#8, ncv#3, pairs#64,
457 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
459 # This is better than klone+color, it doesn't assume white-on-black as the
460 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
461 ecma+color|color control for ECMA-48-compatible terminals,
463 colors#8, ncv#3, pairs#64,
464 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 ecma+italics|ECMA-48 italics,
467 ritm=\E[23m, sitm=\E[3m,
469 # Attribute control for ECMA-48-compatible terminals
470 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
471 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
473 ecma+strikeout|ECMA-48 strikeout/crossed-out,
474 rmxx=\E[29m, smxx=\E[9m,
476 # For comparison, here are all the capabilities implied by the Intel
477 # Binary Compatibility Standard (level 2) that fit within terminfo.
478 # For more detail on this rather pathetic standard, see the comments
479 # near the end of this file.
480 ibcs2|Intel Binary Compatibility Standard prescriptions,
481 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
482 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
483 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
484 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
485 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
486 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
487 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
490 #### ANSI/ECMA-48 terminals and terminal emulators
492 # See near the end of this file for details on ANSI conformance.
493 # Don't mess with these entries! Lots of other entries depend on them!
495 # This section lists entries in a least-capable to most-capable order.
496 # if you're in doubt about what `ANSI' matches yours, try them in that
497 # order and back off from the first that breaks.
499 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
500 # and more than one page of memory. It uses local motions instead of
501 # direct cursor addressing, and makes almost no assumptions. It does
502 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
503 ansi-mr|mem rel cup ansi,
505 cols#80, lines#24, use=vanilla, use=ansi+erase,
508 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
509 # beware of screen size problems and memory relative cursor addressing.
510 ansi-mini|any ansi terminal with pessimistic assumptions,
512 cols#80, lines#24, use=vanilla, use=ansi+cup,
515 # ansi-mtabs adds relative addressing and minimal tab support
516 ansi-mtabs|any ansi terminal with pessimistic assumptions,
518 ht=^I, use=ansi-mini, use=ansi+local1,
520 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
522 # The following is an entry for the full ANSI 3.64 (1977). It lacks
523 # padding, but most terminals using the standard are "fast" enough
524 # not to require any -- even at 9600 bps. If you encounter problems,
525 # try including the padding specifications.
527 # Note: the :as: and :ae: specifications are not implemented here, for
528 # the available termcap documentation does not make clear WHICH alternate
529 # character set to specify. ANSI 3.64 seems to make allowances for several.
530 # Please make the appropriate adjustments to fit your needs -- that is
531 # if you will be using alternate character sets.
533 # There are very few terminals running the full ANSI 3.64 standard,
534 # so I could only test this entry on one verified terminal (Visual 102).
535 # I would appreciate the results on other terminals sent to me.
537 # Please report comments, changes, and problems to:
539 # U.S. MAIL: Hugh Hansard
542 # Atlanta, GA. 30322.
544 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
546 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
547 ansi77|ANSI 3.64 standard 1977 version,
549 cols#80, it#8, lines#24,
550 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
551 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
552 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
553 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
554 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
555 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
556 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
557 smso=\E[7m, smul=\E[4m,
559 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
560 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
561 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
562 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
563 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
564 # to confuse many emulators. On the other hand, we can count on these programs
565 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
566 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
567 # ANSI.SYS influence.
568 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
569 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
571 cols#80, it#8, lines#24,
572 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
573 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
574 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
575 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
576 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
578 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
579 lines#25, use=pcansi-m,
580 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
581 lines#33, use=pcansi-m,
582 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
583 lines#43, use=pcansi-m,
584 # The color versions. All PC emulators do color...
585 pcansi|ibm-pc terminal programs claiming to be ansi,
586 use=klone+color, use=pcansi-m,
587 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
588 lines#25, use=pcansi,
589 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
590 lines#33, use=pcansi,
591 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
592 lines#43, use=pcansi,
594 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
595 # If you want pound signs rather than dollars, replace `B' with `A'
596 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
597 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
598 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
600 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
601 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
602 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
603 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
604 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
605 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
606 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
607 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
608 vpa=\E[%i%p1%dd, use=pcansi-m,
610 ansi+enq|ncurses extension for ANSI ENQ,
611 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
614 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
615 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
616 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
617 ansi|ansi/pc-term compatible with color,
618 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
620 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
621 # all the normal ANSI stuff with no extensions. It assumes
622 # insert/delete line/char is there, so it won't work with
623 # vt100 clones. It assumes video attributes for bold, blink,
624 # underline, and reverse, which won't matter much if the terminal
625 # can't do some of those. Padding is assumed to be zero, which
626 # shouldn't hurt since xon/xoff is assumed.
627 ansi-generic|ansiterm|generic ansi standard terminal,
629 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
630 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
631 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
632 use=ansi+sgrbold, use=ansi+arrows,
634 #### DOS ANSI.SYS variants
636 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
637 # documentation (except for the keyboard key reassignment feature, which
638 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
639 # though undocumented. The <pfkey> capability is untested but should work for
640 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
641 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
642 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
643 OTbs, am, mir, msgr, xon,
645 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
646 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
647 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
648 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
649 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
650 u7=\E[6n, use=klone+color, use=klone+sgr8,
652 # Keypad: Home=\0G Up=\0H PrPag=\0I
653 # ka1,kh kcuu1 kpp,ka3
655 # Left=\0K 5=\0L Right=\0M
658 # End=\0O Down=\0P NxPag=\0Q
659 # kc1,kend kcud1 kc3,knp
664 # On keyboard with 12 function keys,
665 # shifted f-keys: F13-F24
666 # control f-keys: F25-F36
667 # alt f-keys: F37-F48
668 # The shift/control/alt keys do not modify each other, but alt overrides both,
669 # and control overrides shift.
671 # <pfkey> capability for F1-F48 -TD
672 ansi.sys|ANSI.SYS 3.1 and later versions,
673 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
674 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
675 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
676 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
677 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
678 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
679 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
680 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
681 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
682 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
683 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
684 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
685 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
686 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
687 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
691 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
692 # This should only be used when the terminal emulator cannot redefine the keys.
693 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
694 # definitions must be restored. If the terminal emulator is quit while in vi
695 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
696 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
697 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
698 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
699 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
700 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
701 # Consequently the End keypad key could not be set (it is relatively safe and
702 # actually useful because it sends ^@ O, which beeps and opens a line above).
703 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
704 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
705 \svi\s9-29-86\n\E[;75;8p,
706 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
707 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
708 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
709 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
712 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
713 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
714 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
715 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
718 # See ansi.sysk and nansi.sys above.
719 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
720 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
721 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
722 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
725 #### Atari ST terminals
727 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
729 tw52|tw52-color|Toswin window manager with color,
731 colors#16, pairs#0x100,
732 oc=\Eb?\Ec0, op=\Eb?\Ec0,
733 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
735 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
737 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
739 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
742 tw52-m|Toswin window manager monochrome,
745 bold=\Eya, dch1=\Ea, dim=\EyB,
746 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
747 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
748 smso=\EyQ, smul=\EyH, use=at-m,
749 tt52|Atari TT medium and high resolution,
750 lines#30, use=at-color,
751 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
753 colors#16, pairs#0x100,
754 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
755 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
756 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
757 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
758 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
760 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
761 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
762 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
763 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
765 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
768 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
770 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
773 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
776 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
778 cols#80, it#8, lines#24,
779 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
780 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
781 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
782 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
783 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
784 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
785 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
786 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
787 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
788 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
789 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
790 tw100|toswin vt100 window mgr,
792 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
793 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
795 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
796 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
797 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
798 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
799 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
800 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
801 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
802 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
803 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
804 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
805 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
806 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
807 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
808 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
809 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
810 rmso=\E[m, rmul=\E[m,
811 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
813 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
814 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
816 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
817 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
819 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
820 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
821 # The entries for stv52 and stv52pc probably need a revision.
822 stv52|MiNT virtual console,
824 cols#80, it#8, lines#30,
825 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
826 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
827 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
828 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
829 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
830 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
831 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
832 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
833 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
834 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
835 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
836 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
837 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
838 stv52pc|MiNT virtual console with PC charset,
840 cols#80, it#8, lines#30,
841 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
842 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
843 \363z\362{\343|\366}\234~\371,
844 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
845 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
846 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
847 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
848 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
849 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
850 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
851 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
852 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
853 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
854 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
855 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
858 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
861 cols#80, it#8, lines#25,
862 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
863 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
864 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
865 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
866 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
867 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
868 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
870 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
871 # MiNT VT52 emulation. 80 columns, 25 rows.
872 # MiNT is Now TOS, the operating system which comes with all Ataris now
873 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
874 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
875 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
876 st52-old|Atari ST with VT52 emulation,
879 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
880 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
881 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
882 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
883 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
884 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
885 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
886 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
887 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
892 # BeOS entry for Terminal program Seems to be almost ANSI
893 beterm|BeOS Terminal,
894 am, eo, mir, msgr, xenl, xon,
895 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
896 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
897 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
898 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
899 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
900 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
901 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
902 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
903 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
904 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
905 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
906 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
907 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
908 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
909 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
910 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
911 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
912 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
913 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
914 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
920 # This entry is good for the 1.2.13 or later version of the Linux console.
922 # ***************************************************************************
925 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
926 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
927 # * character. Here are the keymap replacement lines that will set this up: *
929 # keycode 15 = Tab Tab
930 # alt keycode 15 = Meta_Tab
931 # shift keycode 15 = F26
932 # string F26 ="\033[Z"
934 # * This has to use a key slot which is unfortunate (any unused one will *
935 # * do, F26 is the higher-numbered one). The change ought to be built *
936 # * into the kernel tables. *
938 # ***************************************************************************
940 # All linux kernels since 1.2.13 (at least) set the screen size
941 # themselves; this entry assumes that capability.
943 linux-basic|linux console,
944 am, bce, eo, mir, msgr, xenl, xon,
946 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
947 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
948 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
949 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
950 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
951 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
952 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
953 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
954 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
955 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
956 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
957 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
958 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
959 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
960 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
961 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
962 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
963 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
964 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
965 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
966 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
967 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
968 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
969 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
972 linux-m|Linux console no color,
974 setab@, setaf@, setb@, setf@, use=linux,
976 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
977 # and it matters, turn off <ccc>. The %02x escape used to implement this is
978 # not supposedly back-portable to older SV curses (although it has worked fine
979 # on Solaris for several years) and not supported in ncurses versions before
981 linux-c-nc|linux console with color-change,
983 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
984 %02x%p4%{255}%*%{1000}%/%02x,
985 oc=\E]R, use=linux-basic,
986 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
987 linux-c|linux console 1.3.6+ for older ncurses,
989 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
990 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
991 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
992 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
993 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
994 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
995 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
996 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
998 oc=\E]R, use=linux-basic,
1000 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1001 # get a block cursor for cvvis.
1002 # reported by Frank Heckenbach <frank@g-n-u.de>.
1003 linux2.2|linux 2.2.x console,
1004 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1005 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1007 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1008 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1009 # Although the kernel has mappings for these, they were not in the default
1010 # font (tested with Debian and Fedora):
1016 linux2.6|linux 2.6.x console,
1017 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1019 enacs=\E)0, rmacs=^O,
1020 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1021 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1022 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1024 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1025 # It is the same as xterm's erase-saved-lines feature.
1026 linux3.0|linux 3.0 kernels,
1027 E3=\E[3J, use=linux2.6,
1029 # This is Linux console for ncurses.
1030 linux|linux console,
1033 # Subject: linux 2.6.26 vt back_color_erase
1034 # Changes to the Linux console driver broke bce model as reported in
1035 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1037 # http://lkml.org/lkml/2008/4/26/305
1038 # http://lkml.org/lkml/2008/10/3/66
1039 linux2.6.26|linux console w/o bce,
1042 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1043 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1044 ich@, ich1@, use=linux,
1046 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1047 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1048 linux-koi8|linux with koi8 alternate character set,
1049 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1050 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1051 \211w\210x\201y\230z\231{\267|\274~\224,
1052 use=linux, use=klone+koi8acs,
1054 # Another entry for KOI8-r with Qing Long's acsc.
1055 # (which one better complies with the standard?)
1056 linux-koi8r|linux with koi8-r alternate character set,
1057 use=linux, use=klone+koi8acs,
1059 # Entry for the latin1 and latin2 fonts
1060 linux-lat|linux with latin1 or latin2 alternate character set,
1061 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1062 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1063 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1066 # This uses graphics from VT codeset instead of from cp437.
1067 # reason: cp437 (aka "straight to font") is not functional under luit.
1068 # from: Andrey V Lukyanov <land@long.yar.ru>.
1069 linux-vt|linux console using VT codes for graphics,
1070 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1072 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1075 # This is based on the Linux console (relies on the console to perform some
1076 # of the functionality), but does not recognize as many control sequences.
1077 # The program comes bundled with an old (circa 1998) copy of the Linux
1078 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1079 # \E* move cursor to home, as as \E[H
1081 # \EE move cursor to beginning of row
1082 # \E[y,xf same as \E[y,xH
1084 # Note: The status-line support is buggy (dsl does not work).
1085 kon|kon2|jfbterm|Kanji ON Linux console,
1087 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1088 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1092 # Another variant. There are two parts (src, src/lib) with the latter
1093 # comprising the escape-sequence parsing. The copyright notice on that
1094 # says it is based on GTerm by Timothy Miller.
1096 # The original developer "dragchan" has left, but as of March 2017 there is
1097 # (still dead) code from May 2015 here:
1098 # https://github.com/izmntuk/fbterm
1100 # The acsc string may be incorrect.
1102 # Not used here, the program recognizes escapes for italic, underline and
1103 # dim, rendering those as green, cyan and gray respectively.
1104 fbterm|FbTerm for Linux with framebuffer,
1105 colors#0x100, pairs#0x10000,
1106 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1107 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1108 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1109 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1110 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1111 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1112 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1113 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1115 # 16-color linux console entry; this works with a 256-character
1116 # console font but bright background colors turn into dim ones when
1117 # you use a 512-character console font. This uses bold for bright
1118 # foreground colors and blink for bright background colors.
1119 linux-16color|linux console with 16 colors,
1120 colors#16, ncv#42, pairs#0x100,
1121 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1122 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1125 # bterm (bogl 0.1.18)
1126 # Implementation is in bogl-term.c
1127 # Key capabilities from linux terminfo entry
1130 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1131 # bterm does not support sgr, since it only processes one parameter -TD
1132 bterm|bogl virtual terminal,
1134 colors#8, cols#80, lines#24, pairs#64,
1135 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1136 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1137 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1138 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1139 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1140 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1141 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1142 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1143 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1144 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1145 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
1146 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1147 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1148 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1153 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1156 cols#80, it#8, lines#25,
1157 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1158 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1159 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1160 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1161 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1162 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1163 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1164 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1165 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1166 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1167 smso=\E[7m, smul=\E[4m,
1168 mach-bold|Mach Console with bold instead of underline,
1169 rmul=\E[0m, smul=\E[1m, use=mach,
1170 mach-color|Mach Console with ANSI color,
1172 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1173 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1175 # From: Samuel Thibault
1176 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1177 # Files: i386/i386at/kd.c
1179 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1181 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1182 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1183 \263y\363z\362{\343|\330}\234~\376,
1184 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1185 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1186 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1187 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1188 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1191 mach-gnu-color|Mach Console with ANSI color,
1193 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1194 setaf=\E[3%p1%dm, use=mach-gnu,
1196 # From: Marcus Brinkmann
1197 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1199 # Comments in the original are summarized here:
1201 # hurd uses 8-bit characters (km).
1203 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1205 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1206 # have the eat_newline_glitch. It doesn't support setting or removing tab
1209 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1210 # one byte instead three.
1212 # <ich1> is not included because hurd has insert mode.
1214 # hurd doesn't use ^J for scrolling, because this could put things into the
1215 # scrollback buffer.
1217 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1218 # This is a GNU extension.
1220 # The original has commented-out ncv, but is restored here.
1222 # Reading the source, RIS resets cnorm, but not xmous.
1223 hurd|The GNU Hurd console server,
1224 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1225 colors#8, it#8, ncv#18, pairs#64,
1226 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1228 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1229 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1230 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1231 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1232 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1233 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1234 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1235 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1236 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1237 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1238 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1239 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1240 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1241 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1242 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1243 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1244 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1245 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1246 rin=\E[%p1%dT, rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m,
1247 rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
1249 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1250 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1251 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1252 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1259 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1260 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1261 # right corner without triggering a scroll. The ncurses terminfo library can
1262 # handle this case with the <ich1> capability, and prefers <am> for better
1263 # optimization. Bug: The <op> capability resets attributes.
1264 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1265 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1266 qnx|qnx4|qnx console,
1267 daisy, km, mir, msgr, xhpa, xt,
1268 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1269 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1270 \303u\264v\301w\302x\263,
1271 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1272 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1273 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1274 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1275 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1276 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1277 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1278 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1279 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1280 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1281 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1282 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1283 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1284 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1285 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1286 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1287 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1288 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1289 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1290 kext=\377\270, kf1=\377\201, kf10=\377\212,
1291 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1292 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1293 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1294 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1295 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1296 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1297 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1298 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1299 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1300 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1301 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1302 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1303 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1304 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1305 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1306 khlp=\377\350, khome=\377\240, khts=\377\342,
1307 kich1=\377\253, kil1=\377\273, kind=\377\261,
1308 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1309 knp=\377\252, knxt=\377\312, kopn=\377\357,
1310 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1311 kprv=\377\302, krdo=\377\336, kref=\377\354,
1312 kres=\377\360, krfr=\377\347, kri=\377\271,
1313 krmir=\377\313, krpl=\377\362, krst=\377\352,
1314 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1315 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1316 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1317 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1318 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1322 qnxt|qnxt4|QNX4 terminal,
1325 qnxm|QNX4 with mouse events,
1327 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1328 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1329 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1330 smicm=\E/>2h, use=qnx4,
1335 # Monochrome QNX4 terminal or console. Setting this terminal type will
1336 # allow an application running on a color console to behave as if it
1337 # were a monochrome terminal. Output will be through stdout instead of
1338 # console writes because the term routines will recognize that the
1339 # terminal name starts with 'qnxt'.
1341 qnxtmono|Monochrome QNX4 terminal or console,
1345 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1346 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1347 # (TD: derive from original qnx4 entry)
1348 qnxt2|qnx 2.15 serial terminal,
1350 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1351 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1353 # QNX ANSI terminal definition
1356 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1357 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1358 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1359 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
1360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1361 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1362 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1363 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1364 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1365 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1366 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1367 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1368 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1369 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1370 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1371 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1372 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1373 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1374 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1375 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1376 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1377 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1378 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1379 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1380 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1381 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1382 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1383 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1384 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1385 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1386 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1387 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1388 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1389 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1390 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1391 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1392 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1393 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1394 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1395 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1396 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1398 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1400 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1401 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1402 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1403 smul=\E[4m, tbc=\E[3g,
1404 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1406 qansi|QNX ansi with console writes,
1407 daisy, xhpa, use=qansi-g,
1409 qansi-t|QNX ansi without console writes,
1412 qansi-m|QNX ansi with mouse,
1414 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1415 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1416 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1417 smicm=\E[>2h, use=qansi,
1419 qansi-w|QNX ansi for windows,
1424 # SCO console and SOS-Syscons console for 386bsd
1425 # (scoansi: had unknown capabilities
1426 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1427 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1428 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1429 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1430 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1431 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1432 # on the <smacs>=\E[12m -- esr)
1434 # klone+sgr-dumb is an error since the acsc does not match -TD
1436 # In this description based on SCO's keyboard(HW) manpage list of default
1437 # function key values:
1438 # F13-F24 are shifted F1-F12
1439 # F25-F36 are control F1-F12
1440 # F37-F48 are shift+control F1-F12
1442 # hpa/vpa work in the console, but not in scoterm:
1446 # SCO's terminfo uses
1449 # which do not work (console or scoterm).
1451 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1452 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1453 OTbs, am, bce, eo, xon,
1454 colors#8, cols#80, it#8, lines#25, pairs#64,
1455 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
1456 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
1458 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1459 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1460 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1461 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1462 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1463 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1464 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1465 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1466 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1467 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1468 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1469 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1470 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1471 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1472 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1473 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1474 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1475 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1476 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1477 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1478 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1479 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1480 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1481 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1482 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1483 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1485 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1486 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1487 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1488 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1489 %p7%t;8%;%?%p9%t;12%e;10%;m,
1490 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1491 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1492 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1493 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1494 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1496 # make this easy to change...
1497 scoansi|SCO Extended ANSI standard crt,
1502 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1503 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1504 # for the application keypad mode. We have added iris-ansi-ap rather than
1505 # change the original to keypad mode.
1507 # (iris-ansi: added rmam/smam based on init string -- esr)
1509 # This entry, and those derived from it, is used in xwsh (also known as
1510 # winterm). Some capabilities that do not fit into the terminfo model
1511 # include the shift- and control-functionkeys:
1513 # F1-F12 generate different codes when shift or control modifiers are used.
1517 # control-F1 \E[025q
1519 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1520 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1522 # The cursor keys also have different codes:
1523 # control-up \E[162q
1524 # control-down \E[165q
1525 # control-left \E[159q
1526 # control-right \E[168q
1529 # shift-down \E[164q
1530 # shift-left \E[158q
1531 # shift-right \E[167q
1533 # control-tab \[072q
1535 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1537 cols#80, it#8, lines#40,
1538 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1539 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1540 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1541 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1542 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1543 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1544 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1545 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1546 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1547 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1548 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1549 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1550 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1551 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1552 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1553 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1554 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1555 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1556 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1558 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1559 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1560 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1562 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1563 # (T.Dickey 98/1/24)
1564 iris-color|xwsh|IRIX ANSI with color,
1566 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1567 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1568 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1569 use=ecma+italics, use=vt100+enq, use=klone+color,
1572 #### OpenBSD consoles
1574 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1576 # The following terminal descriptions for the AMD/Intel PC console
1577 # were prepared based on information contained in the OpenBSD-4.9
1578 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1580 # Added bce based on testing with tack -TD
1581 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1582 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1584 # Notes from testing with vttest:
1585 # fails wrapping test
1587 # identifies as vt200 with selective erase, but does not implement DECSCA
1590 # ESC # 8 DEC Screen Alignment Test (DECALN).
1591 # CSI ? 5 h Reverse Video (DECSCNM).
1593 pccon+keys|OpenBSD PC keyboard keys,
1594 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1595 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1596 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1597 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1598 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1599 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1600 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1601 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1603 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1604 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
1606 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1608 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1609 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1611 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1612 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1614 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1615 # underline renders as color
1616 pccon+colors|ANSI colors for OpenBSD PC console,
1618 colors#8, ncv#2, pairs#64,
1619 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1620 pccon+base|base capabilities for OpenBSD PC console,
1621 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1622 cols#80, it#8, lines#24,
1623 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
1624 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
1625 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1626 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1627 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1628 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
1629 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
1631 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1632 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1633 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1634 use=pccon0-m, use=pccon+colors,
1635 pccon-m|OpenBSD PC console without colors,
1636 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1637 pccon|OpenBSD PC console,
1638 use=pccon-m, use=pccon+colors,
1640 #### NetBSD consoles
1642 # pcvt termcap database entries (corresponding to release 3.31)
1643 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1645 # (For the terminfo master file, I translated these into terminfo syntax.
1646 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1647 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1648 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1650 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1651 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1652 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1653 pcvtXX|pcvt vt200 emulator (DEC VT220),
1654 am, km, mir, msgr, xenl,
1656 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1658 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1659 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1660 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1661 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1662 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1663 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1664 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1665 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1666 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1667 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1668 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1669 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1670 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1671 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1672 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1673 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1674 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1675 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1676 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1678 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1679 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1680 # 50 lines entries; 80 columns
1681 pcvt25|dec vt220 emulation with 25 lines,
1683 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1684 pcvt28|dec vt220 emulation with 28 lines,
1686 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1687 pcvt35|dec vt220 emulation with 35 lines,
1689 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1690 pcvt40|dec vt220 emulation with 40 lines,
1692 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1693 pcvt43|dec vt220 emulation with 43 lines,
1695 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1696 pcvt50|dec vt220 emulation with 50 lines,
1698 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1700 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1701 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1702 # 50 lines entries; 132 columns
1703 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1705 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1706 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1708 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1709 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1711 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1712 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1714 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1715 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1717 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1718 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1720 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1722 # OpenBSD implements a color variation
1723 pcvt25-color|dec vt220 emulation with 25 lines and color,
1725 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1726 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1727 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1728 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1729 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1732 # Terminfo entries to enable the use of the ncurses library in colour on a
1733 # NetBSD-arm32 console (only tested on a RiscPC).
1734 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1735 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1736 # typo in invis - TD
1737 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1738 am, bce, msgr, xenl, xon,
1739 cols#80, it#8, lines#30,
1740 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1741 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1742 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1743 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1744 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1745 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1746 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1747 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1748 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1749 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1750 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1751 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1752 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1753 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1754 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1756 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1757 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1758 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1759 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1762 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1763 cols#132, lines#50, use=arm100,
1765 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1766 # manufactured by Sharp for the Japanese market.
1767 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1768 x68k|x68k-ite|NetBSD/x68k ITE,
1770 kclr=\E[9~, khlp=\E[28~, use=vt220,
1773 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1775 # (still unfinished, but good enough so far.)
1776 ofcons|DNARD OpenFirmware console,
1779 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1780 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1781 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1782 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1783 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1784 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1785 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1786 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1787 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1788 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1789 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1790 rmso=\2330m, rmul=\2330m,
1791 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1792 %;%?%p1%p3%|%t;7%;m,
1793 sgr0=\2330m, smso=\2337m, smul=\2334m,
1795 # NetBSD "wscons" emulator in vt220 mode.
1796 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1797 # The emulator renders underlined text in red. Colors are otherwise usable.
1799 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1800 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1801 # vt220 screens in vttest do not work with this emulator. For instance, it
1802 # identifies itself (primary DA response) as a vt220 with selective erase. But
1803 # the selective erase feature does not work. The secondary response is copied
1804 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1805 # the level of detail in a termcap, it is a passable emulator, since ECH does
1806 # work. Don't use it on a VMS system -TD
1807 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1809 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1810 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1811 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1812 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1813 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1814 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1815 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1817 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1820 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1822 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1823 # Initial testing set TERM=xterm, based on comments by developers, found too
1824 # many differences to continue in that path. However, test-results may be
1825 # useful to people curious about compatibility with xterm.
1827 # Testing with tack:
1829 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1830 # There is color-bleeding in the color-pairs screen.
1831 # Attributes do not work with color
1833 # Failed: kf1-kf4, kf13-kf48, khome, kend
1834 # (effectively xterm-r6 for function-keys)
1835 # None of the function or cursor key-modifiers are encoded.
1836 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1838 # Testing with vttest:
1839 # -------------------
1840 # Identifies as vt220 with selective erase
1841 # (however, selective erase refers to DECSCA, SPA)
1842 # Does not implement vt52
1843 # Uses spaces to simulate double-size characters
1844 # Does not support 8-bit controls
1845 # Does not support VT220 reports
1846 # Does not support send/receive mode
1847 # Supports ECH (like rxvt)
1848 # Does not support DECSCA
1849 # Does not support any of the ISO-6429 cursor-movement
1850 # Does not support any of the ISO-6429 miscellaneous tests
1851 # (SL/SR also leave unexpected char on screen too)
1852 # Background does not change in menu 11.6.9 (SGR 22-27)
1853 # None of the xterm special features tests work
1854 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1857 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1859 rcons|BSD rasterconsole,
1861 # Color version of above. Color currently only provided by NetBSD.
1862 rcons-color|BSD rasterconsole with ANSI color,
1865 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1867 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1868 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1869 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1870 # -- compare with cons25w
1871 mgterm|MGL/MGL2 MobileGear Graphic Library,
1872 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1873 colors#8, cols#80, it#8, lines#18, pairs#64,
1874 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1875 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1876 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1877 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1878 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1879 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1880 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1881 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1882 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1883 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
1884 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1885 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1886 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1887 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1888 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1889 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1891 #### FreeBSD console entries
1893 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1894 # Andrey Chernov maintains the FreeBSD termcap distributions.
1896 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1897 # or comment out the :cb: capability in the console entry.
1899 # Alexander Lukyanov reports:
1900 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1901 # Now el1 clears not only to the line beginning, but also a large chunk
1902 # of previous line. But there is another bug - ech does not work at all.
1906 # common entry without semigraphics
1907 # Bug: The <op> capability resets attributes.
1908 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1909 # instance el1 does if the cursor is moved to the right margin first. Removed
1910 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1912 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1913 # Note that this disables standout with color.
1915 # The emulator sends difference strings based on shift- and control-keys,
1917 # F13-F24 are shifted F1-F12
1918 # F25-F36 are control F1-F12
1919 # F37-F48 are shift+control F1-F12
1920 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1921 am, bce, bw, eo, msgr, npc,
1922 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1923 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1924 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1925 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1926 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1927 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1928 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1929 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1930 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1931 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1932 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
1933 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1934 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1935 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1936 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1937 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1938 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1939 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1940 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1941 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1942 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1943 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1944 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1945 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1946 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
1948 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1949 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1950 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
1951 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
1954 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
1955 kbs=^?, kdch1=\E[3~, use=cons25,
1956 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1958 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1959 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1960 smul=\E[4m, use=cons25,
1961 cons30|ansi80x30|freebsd console (30-line ansi mode),
1962 lines#30, use=cons25,
1963 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1964 lines#30, use=cons25-m,
1965 cons43|ansi80x43|freebsd console (43-line ansi mode),
1966 lines#43, use=cons25,
1967 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1968 lines#43, use=cons25-m,
1969 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1970 lines#50, use=cons25,
1971 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1972 lines#50, use=cons25-m,
1973 cons60|ansi80x60|freebsd console (60-line ansi mode),
1974 lines#60, use=cons25,
1975 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1976 lines#60, use=cons25-m,
1977 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1978 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
1979 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
1982 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1984 op@, rmul=\E[m, setab@, setaf@,
1985 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1986 %t;30;1%;%?%p6%t;1%;m,
1987 smul=\E[4m, use=cons25r,
1988 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1989 lines#50, use=cons25r,
1990 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1991 lines#50, use=cons25r-m,
1992 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1993 lines#60, use=cons25r,
1994 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1995 lines#60, use=cons25r-m,
1996 # ISO 8859-1 FreeBSD console
1997 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1998 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
1999 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2000 \226v\227w\230x\231y\232z\233~\237,
2002 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2004 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2005 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2006 smul=\E[4m, use=cons25l1,
2007 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2008 lines#50, use=cons25l1,
2009 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2010 lines#50, use=cons25l1-m,
2011 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2012 lines#60, use=cons25l1,
2013 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2014 lines#60, use=cons25l1-m,
2016 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2017 # which is intended to be xterm-compatible. See for example
2018 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2019 # in particular scterm-teken.c
2021 # For FreeBSD 9 and 10:
2022 # --------------------
2023 # The /etc/ttys entries for console and other ttys are all configured to set
2026 # Testing with tack:
2027 # There is no VT100 line-drawing (uses +'s and -'s)
2028 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2030 # Testing with vttest:
2031 # Menu 2 diamonds don't work, blink ditto, light background ditto
2032 # The terminal identifies itself as VT100 with AVO
2033 # There is no VT52 support
2034 # There is no doublesize character support
2035 # The terminal supports ECH (like rxvt)
2036 # The terminal does not support send/receive mode
2037 # The terminal supports all of the ISO-6429 cursor-movement
2038 # The terminal supports some of the ISO-6429 miscellaneous tests
2039 # (SL/SR also leave unexpected char on screen too)
2041 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2042 # the cells which happen to have ASCII control-character values:
2043 # - ^X arrow pointing up
2044 # . ^Y arrow pointing down
2048 # Those are removed from this entry's acsc string to avoid confusion.
2049 # The resulting description provides correct line-drawing and function-keys -TD
2050 teken|syscons with teken,
2052 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2053 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2054 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2055 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2056 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2057 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2058 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2059 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2060 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2061 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2063 #### 386BSD and BSD/OS Consoles
2066 # This was the original 386BSD console entry (I think).
2067 # Some places it's named oldpc3|oldibmpc3.
2068 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2069 origpc3|origibmpc3|IBM PC 386BSD Console,
2070 OTbs, am, bw, eo, xon,
2072 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2074 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2075 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2076 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2077 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2078 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2079 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2081 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2082 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2085 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2086 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2087 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2088 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2090 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2091 # Note, the emulator supports many of the additional console features
2092 # listed in the iBCS2 (e.g. character-set selection) though not all
2093 # are described here. This entry really ought to be upgraded.
2094 # Also note, the console will also work with fewer lines after doing
2095 # "stty rows NN", e.g. to use 24 lines.
2096 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2097 # Bug: The <op> capability resets attributes.
2098 bsdos-pc|IBM PC BSD/OS Console,
2099 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2100 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2101 use=bsdos-pc-nobold,
2103 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2104 use=klone+color, use=bsdos-pc-m,
2106 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2107 OTbs, am, eo, km, xon,
2108 cols#80, it#8, lines#25,
2109 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2110 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2111 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2112 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2113 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2114 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2115 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2116 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2117 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2120 # Old names for BSD/OS PC console used in releases before 4.1.
2121 pc3|BSD/OS on the PC Console,
2122 use=bsdos-pc-nobold,
2123 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2126 # BSD/OS on the SPARC
2127 bsdos-sparc|Sun SPARC BSD/OS Console,
2130 # BSD/OS on the PowerPC
2131 bsdos-ppc|PowerPC BSD/OS Console,
2136 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2138 # Actually (TD pointed this out at the time the acsc string was added):
2139 # vt52 shouldn't define full acsc since most of the cells don't match.
2140 # see vt100 manual page A-31. This is the list that does match:
2149 # The line-drawing happens to work in several terminal emulators, but should
2150 # not be used as a guide to the capabilities of the vt52. Note in particular
2151 # that vt52 does not support line-drawing characters (the scan-X values refer
2152 # to a crude plotting feature) -TD
2155 cols#80, it#8, lines#24,
2156 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
2157 cub1=\ED, cud1=\EB, cuf1=\EC,
2158 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2159 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2160 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
2162 #### DEC VT100 and compatibles
2164 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2165 # and micro consoles can be found in the `obsolete' section. More details on
2166 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2167 # found near the end of this file.
2169 # Except where noted, these entries are DEC's official terminfos.
2170 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2171 # Engineering for more information. Updated terminfos and termcaps
2172 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2174 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2175 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2176 # its name to Boundless Technologies; see http://www.boundless.com.
2179 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2180 # certainly includes what DEC called the `Level 1 editing extension' codes;
2181 # only the very oldest VT100s lacked these and there probably aren't any of
2182 # those left alive. To capture these, use one of the VT102 entries.
2184 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2185 # since the cursor is left in a different position while in the
2186 # weird state (concept at beginning of next line, vt100 at end
2187 # of this line) so all versions of vi before 3.7 don't handle
2188 # <xenl> right on vt100. The correct way to handle <xenl> is when
2189 # you output the char in column 80, immediately output CR LF
2190 # and then assume you are in column 1 of the next line. If <xenl>
2191 # is on, am should be on too.
2193 # I assume you have smooth scroll off or are at a slow enough baud
2194 # rate that it doesn't matter (1200? or less). Also this assumes
2195 # that you set auto-nl to "on", if you set it off use vt100-nam
2198 # The padding requirements listed here are guesses. It is strongly
2199 # recommended that xon/xoff be enabled, as this is assumed here.
2201 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2202 # tab settings are in non-volatile memory and don't need to be
2203 # reset upon login. Also setting the number of columns glitches
2204 # the screen annoyingly. You can type "reset" to get them set.
2206 # The VT100 series terminals have cursor ("arrows") keys which can operate
2207 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2208 # is the reset state, and is assumed to be the normal state. Application
2209 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2210 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2211 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2212 # was provided primarily as an aid to the porting of VT52 applications. It is
2213 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2214 # applications such as vi will always transmit the <smkx> string. Therefore,
2215 # the definitions for the cursor keys are made to match what the terminal
2216 # transmits after the <smkx> string is transmitted. If the <smkx> string
2217 # is a null string or is not defined, then cursor keys are assumed to be in
2218 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2219 # else the application may fail. It is also expected that applications will
2220 # always transmit the <rmkx> string to the terminal before they exit.
2222 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2223 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2224 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2225 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2226 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2227 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2228 # Enter key transmits the same as the Return key (Note: the Return key
2229 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2230 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2231 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2232 # is normally in Numeric Mode. If an application requires that the keypad be
2233 # in Application Mode then it is expected that the user, or the application,
2234 # will set the TERM environment variable to point to a terminfo entry which has
2235 # defined the <smkx> string to include the codes that switch the keypad into
2236 # Application Mode, and the terminfo entry will also define function key
2237 # fields to match the Application Mode control codes. If the <smkx> string
2238 # is a null string or is not defined, then the keypad is assumed to be in
2239 # Numeric Mode. If the <smkx> string switches the keypad into Application
2240 # Mode, it is expected that the <rmkx> string will contain the control codes
2241 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2242 # applications which transmit the <smkx> string will also always transmit the
2243 # <rmkx> string to the terminal before they exit.
2245 # Here's a diagram of the VT100 keypad keys with their bindings.
2246 # The top line is the name of the key (some DEC keyboards have the keys
2247 # labelled somewhat differently, like GOLD instead of PF1, but this is
2248 # the most "official" name). The second line is the escape sequence it
2249 # generates in Application Keypad mode (where "$" means the ESC
2250 # character). The third line contains two items, first the mapping of
2251 # the key in terminfo, and then in termcap.
2252 # _______________________________________
2253 # | PF1 | PF2 | PF3 | PF4 |
2254 # | $OP | $OQ | $OR | $OS |
2255 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2257 # | $Ow | $Ox | $Oy | $Om |
2258 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2260 # | $Ot | $Ou | $Ov | $Ol |
2261 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2263 # | $Oq | $Or | $Os | enter |
2264 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2267 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2269 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2270 # terminfo guidelines. That is a compromise used to assign the remaining
2271 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2273 vt100+keypad|dec vt100 numeric keypad no fkeys,
2274 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2275 vt100+pfkeys|dec vt100 numeric keypad,
2276 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2278 vt100+fnkeys|dec vt100 numeric keypad,
2279 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2280 kf9=\EOw, use=vt100+pfkeys,
2282 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2283 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2284 # use the 5-key arrangement to model the arrow keys as suggested in the
2285 # terminfo guidelines:
2286 # _______________________________________
2287 # | PF1 | PF2 | PF3 | PF4 |
2288 # | $OP | $OQ | $OR | $OS |
2289 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2291 # | $Ow | $Ox | $Oy | $Om |
2292 # |_ka1__K1_|_________|_ka3__K3_|_________|
2294 # | $Ot | $Ou | $Ov | $Ol |
2295 # |_________|_kb2__K2_|_________|_________|
2297 # | $Oq | $Or | $Os | enter |
2298 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2301 # |___________________|_________|_kent_@8_|
2303 vt220+keypad|dec vt220 numeric keypad,
2304 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2305 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2308 vt100+enq|ncurses extension for vt100-style ENQ,
2309 u8=\E[?1;2c, use=ansi+enq,
2310 vt102+enq|ncurses extension for vt102-style ENQ,
2311 u8=\E[?6c, use=ansi+enq,
2313 # And here, for those of you with orphaned VT100s lacking documentation, is
2314 # a description of the soft switches invoked when you do `Set Up'.
2316 # Scroll 0-Jump Shifted 3 0-#
2317 # | 1-Smooth | 1-British pound sign
2318 # | Autorepeat 0-Off | Wrap Around 0-Off
2320 # | | Screen 0-Dark Bkg | | New Line 0-Off
2321 # | | | 1-Light Bkg | | | 1-On
2322 # | | | Cursor 0-Underline | | | Interlace 0-Off
2323 # | | | | 1-Block | | | | 1-On
2325 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2327 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2328 # | | | 1-On | | | 1-50 Hz
2329 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2330 # | | 1-ANSI | | 1-8 Bits
2331 # | Keyclick 0-Off | Parity 0-Off
2333 # Margin Bell 0-Off Parity Sense 0-Odd
2336 # The following SET-UP modes are assumed for normal operation:
2337 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2338 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2339 # Other SET-UP modes may be set for operator convenience or communication
2340 # requirements; I recommend
2341 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2342 # Unless you have a graphics add-on such as Digital Engineering's VT640
2343 # (and even then, whenever it can be arranged!) you should set
2346 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2347 vt100|vt100-am|dec vt100 (w/advanced video),
2348 OTbs, mc5i, xenl, xon,
2350 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2351 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2352 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2353 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2355 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2356 %;m%?%p9%t\016%e\017%;$<2>,
2357 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2358 use=vt100+4bsd, use=vt100+fnkeys,
2359 vt100+4bsd|dec vt100 from 4.0BSD,
2361 cols#80, it#8, lines#24,
2362 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2363 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2364 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2365 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2366 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2367 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2368 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2369 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2370 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2371 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2372 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2373 %;m%?%p9%t\016%e\017%;$<2>,
2374 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2375 smul=\E[4m$<2>, tbc=\E[3g,
2376 vt100nam|vt100-nam|vt100 no automargins,
2378 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2379 vt100-vb|dec vt100 (w/advanced video) & no beep,
2380 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2382 # Ordinary vt100 in 132 column ("wide") mode.
2383 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2385 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2386 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2387 cols#132, lines#14, vt@,
2388 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2390 # vt100 with no advanced video.
2391 vt100-nav|vt100 without advanced video option,
2393 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2395 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2396 cols#132, lines#14, use=vt100-nav,
2398 # vt100 with one of the 24 lines used as a status line.
2399 # We put the status line on the top.
2400 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2403 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2404 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2405 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2406 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2408 # Status line at bottom.
2409 # Clearing the screen will clobber status line.
2410 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2413 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2414 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2416 # Most of the `vt100' emulators out there actually emulate a vt102
2417 # This entry (or vt102-nsgr) is probably the right thing to use for
2420 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2422 vt102-w|dec vt102 in wide mode,
2424 rs3=\E[?3h, use=vt102,
2426 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2427 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2428 # string in the canonical vt100 entry above leaves the screen littered
2429 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2430 # after highlight turnoffs. This entry should fix that, and even leave
2431 # ACS support working, at the cost of making multiple-highlight changes
2432 # slightly more expensive.
2433 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2434 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2435 sgr@, sgr0=\E[m, use=vt102,
2437 # VT125 Graphics CRT. Clear screen also erases graphics
2438 # Some vt125's came configured with vt102 support.
2439 vt125|vt125 graphics terminal,
2441 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2443 # This isn't a DEC entry, it came from University of Wisconsin.
2444 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2447 cols#80, it#8, lines#24, vt#3,
2448 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2449 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2450 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2451 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2452 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2453 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2454 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2455 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2456 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2458 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2459 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2460 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2462 # vt132 - like vt100 but slower and has ins/del line and such.
2463 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2464 # manual and from the ANSI standard, this describes the actual
2465 # terminal. I've never actually used a vt132 myself, so this
2470 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2471 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2473 # This vt220 description maps F5--F9 to the second block of function keys
2474 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2475 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2476 # PF1--PF4 are used as F1--F4.
2479 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2480 OTbs, OTpt, am, mir, msgr, xenl, xon,
2481 cols#80, lines#24, vt#3,
2483 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2484 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2485 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2486 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2487 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2488 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2489 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2490 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2491 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2492 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2493 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2494 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2495 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2496 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2497 rmso=\E[27m, rmul=\E[24m,
2498 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2499 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2500 %p9%t\E(0%e\E(B%;$<2>,
2501 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2502 smso=\E[7m, smul=\E[4m,
2504 # A much better description of the VT200/220; used to be vt220-8
2505 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2506 # designation to accommodate bug in pcvt -TD
2508 # Here's a picture of the VT220 editing keypad:
2509 # +--------+--------+--------+
2510 # | Find | Insert | Remove |
2511 # +--------+--------+--------+
2512 # | Select | Prev | Next |
2513 # +--------+--------+--------+
2514 vt220|vt200|dec vt220,
2515 OTbs, am, mir, msgr, xenl, xon,
2516 cols#80, it#8, lines#24, vt#3,
2517 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2518 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2520 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2522 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2523 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2524 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2525 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2526 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2527 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2528 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2529 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2530 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2531 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2532 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2533 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2534 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2535 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2536 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2538 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2539 %p9%t\E(0%e\E(B%;$<2>,
2540 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2541 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2543 vt220-w|vt200-w|DEC vt220 in wide mode,
2545 rs3=\E[?3h, use=vt220,
2546 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2547 OTbs, am, mc5i, mir, msgr, xenl, xon,
2548 cols#80, it#8, lines#24, vt#3,
2549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2550 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2551 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2552 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2553 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2554 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2555 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2556 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2557 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2558 il=\233%p1%dL, il1=\233L, ind=\ED,
2559 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2560 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2561 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2562 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2563 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2564 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2565 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2566 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2567 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2568 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2569 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2570 rmul=\23324m, rs1=\233?3l, sc=\E7,
2571 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2572 %?%p9%t\E(0%e\E(B%;$<2>,
2573 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2574 smso=\2337m, smul=\2334m, tbc=\2333g,
2577 # This vt220 description regards F6--F10 as the second block of function keys
2578 # at the top of the keyboard. This mapping follows the description given
2579 # in the VT220 Programmer Reference Manual and agrees with the labeling
2580 # on some terminals that emulate the vt220. There is no support for an F5.
2581 # See vt220 for an alternate mapping.
2583 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2584 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2585 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2586 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2587 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2589 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2591 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2593 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2594 # (not an official DEC entry!)
2595 # The problem with real vt220 terminals is they don't send escapes when in
2596 # in vt220 mode. This can be gotten around two ways. 1> don't send
2597 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2598 # features of vt100 advanced video which it then has.
2600 # This entry takes the view of putting a vt220 into vt100 mode so
2601 # you can use the escape key in emacs and everything else which needs it.
2603 # You probably don't want to use this on a VMS machine since VMS will think
2604 # it has a vt220 and will get fouled up coming out of emacs
2606 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2607 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2609 vt200-js|vt220-js|dec vt200 series with jump scroll,
2612 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2613 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2614 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2615 ht=^I, il1=\E[L, ind=\ED,
2616 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2618 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2619 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2620 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2621 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2622 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2623 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2625 # This was DEC's vt320. Use the purpose-built one below instead
2626 #vt320|DEC VT320 in vt100 emulation mode,
2629 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2631 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2633 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2635 # These entries are not DEC's official ones, they were purpose-built for the
2636 # VT320. Here are the designer's notes:
2637 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2638 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2639 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2640 # Things that use <knxt> usually use tab anyways... and things that don't use
2641 # tab usually use <knxt> instead...
2642 # kprv is same as tab - Backtab is useless...
2643 # I left out <sgr> because of its RIDICULOUS complexity,
2644 # and the resulting fact that it causes the termcap translation of the entry
2645 # to SMASH the 1k-barrier...
2646 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2647 # (vt320: uncommented <fsl> --esr)
2648 vt320|vt300|dec vt320 7 bit terminal,
2649 am, hs, mir, msgr, xenl,
2650 cols#80, lines#24, wsl#80,
2651 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2652 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2653 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
2654 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2655 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2656 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2657 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2658 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2659 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2660 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2661 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2662 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2663 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2664 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2665 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2666 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2667 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2668 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2669 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2671 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2673 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2674 %p9%t\E(0%e\E(B%;$<2>,
2675 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2676 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2677 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2678 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2680 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2681 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2682 # We have to init 132-col mode, not 80-col mode.
2683 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2685 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2686 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2687 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2689 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2690 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2692 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2693 # which are pretty much a superset of the VT320. They have the
2694 # host writable status line, yet another different DRCS matrix size,
2695 # and such, but they add the DEC Technical character set, Multiple text
2696 # pages, selectable length pages, and the like. The difference between
2697 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2698 # monitor, the former has 4 planes and a color monitor. These terminals
2699 # support VT131 and ANSI block mode, but as with much of these things,
2700 # termcap/terminfo doesn't deal with these features.
2702 # Note that this entry is are set up in what was the standard way for GNU
2703 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2704 # keys were switched into application mode at the same time the numeric pad
2705 # is switched into application mode. This changes the definitions of the
2706 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2707 # your termcap or terminfo entry,
2709 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2710 # (vt340: string capability "sb=\E[M" corrected to "sr";
2711 # also, added <rmam>/<smam> based on the init string -- esr)
2712 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2713 am, eslok, hs, mir, msgr, xenl, xon,
2714 cols#80, it#8, lines#24, vt#3,
2715 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2716 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2717 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2718 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2719 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2720 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2721 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2722 ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2723 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2725 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2727 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2728 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2729 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2730 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2731 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2732 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2733 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2734 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2735 %p9%t\E(0%e\E(B%;$<2>,
2736 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2737 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2738 tsl=\E[2$~\E[1$}\E[1;%dH,
2740 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2741 # (originally written with vt420 as its primary name, and usable for it).
2743 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2744 # text pages and long text pages with selectable length of the vt340, along
2745 # with left and right margins, rectangular area text copy, fill, and erase
2746 # operations, selected region character attribute change operations,
2747 # page memory and rectangle checksums, insert/delete column, reception
2748 # macros, and other features too numerous to remember right now. TERMCAP
2749 # can only take advantage of a few of these added features.
2751 # Note that this entry is are set up in what was the standard way for GNU
2752 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2753 # keys were switched into application mode at the same time the numeric pad
2754 # is switched into application mode. This changes the definitions of the
2755 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2756 # your termcap entry,
2758 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2759 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2760 # also, added <rmam>/<smam> based on the init string -- esr)
2761 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2762 am, eslok, hs, mir, msgr, xenl, xon,
2763 cols#80, it#8, lines#24, vt#3,
2764 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2765 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2766 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
2767 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2768 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2769 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2770 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2771 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2772 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2773 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2774 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2775 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2777 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2778 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2779 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2780 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2781 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2782 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2783 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2784 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2785 %p9%t\E(0%e\E(B%;$<2>,
2786 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2787 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2788 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2790 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2791 # a missing <sc> -- esr)
2792 # add msgr and other capabilities from vt220 -TD
2794 am, mir, msgr, xenl, xon,
2795 cols#80, it#8, lines#24, vt#3,
2796 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2797 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2798 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2799 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2800 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2801 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2802 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2803 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2804 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2805 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2806 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2807 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2808 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2809 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2810 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2811 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2812 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2813 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2814 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2815 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2816 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2817 %p9%t\E(0%e\E(B%;$<2>,
2818 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2819 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2820 use=ansi+pp, use=dec+sl, use=ansi+enq,
2822 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2823 # takes two parameters, the key and the string. Translating the key is
2824 # straightforward (keys 1-5 are not defined on real terminals, though some
2825 # emulators define these):
2827 # if (key < 16) then value = key;
2828 # else if (key < 21) then value = key + 1;
2829 # else if (key < 25) then value = key + 2;
2830 # else if (key < 27) then value = key + 3;
2831 # else if (key < 30) then value = key + 4;
2832 # else value = key + 5;
2834 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2835 # There's no provision in terminfo for emitting a string in this format, so the
2836 # application has to know it.
2838 vt420pc|DEC VT420 w/PC keyboard,
2839 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2840 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
2841 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
2842 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
2843 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
2844 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
2845 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
2846 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
2847 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
2848 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
2849 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
2850 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
2851 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2852 pctrm=USR_TERM\:vt420pcdos\:,
2853 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
2854 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
2858 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2860 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
2861 %{127}%=%t\E\177%e%p1%c%;,
2863 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2864 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2866 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2867 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2868 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2869 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2870 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2871 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2872 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2877 vt510pc|DEC VT510 w/PC keyboard,
2879 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2884 # The VT520 is a monochrome text terminal capable of managing up to
2885 # four independent sessions in the terminal. It has multiple ANSI
2886 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2887 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2888 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2890 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2891 # [Alt]/[Print Screen] depending upon which keyboard and which
2892 # terminal mode is being used. If Set-Up has been disabled or
2893 # assigned to an unknown key, Set-Up may be entered by pressing
2894 # [F3] as the first key after power up, regardless of keyboard type.
2896 use=ansi+rca, use=vt420, use=ansi+tabs,
2901 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
2902 # Keyboard, which replaces the old LK41R-AA keyboard.
2904 # In trying to get the function keys to work, I had to cobble my own
2905 # terminfo.src entry, since the existing vt520 entry doesn't include most of
2906 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
2907 # I seem to get them all -Mike Gran
2908 vt520ansi|Boundless VT520 ANSI,
2909 use=ansi+rca, use=vt420f, use=vt220+keypad,
2912 #### VT100 emulations
2914 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2915 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2916 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2917 # that this works best with a stock vt100 entry.
2918 dec-vt100|EWAN telnet's vt100 emulation,
2921 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2922 dec-vt220|DOS tnvt200 terminal emulator,
2925 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2926 # anyone who needs PC VT340 emulation. (or anything below that level, for
2927 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2928 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2929 # I can send the address if requested.
2930 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2931 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2932 z340|zstem vt340 terminal emulator 132col 42line,
2934 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2935 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
2936 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2938 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2939 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
2941 # expect-5.44.1.15/example/tkterm
2942 # a minimal subset of a vt100 (compare with "news-unk).
2944 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
2945 tt|tkterm|Don Libes' tk text widget terminal emulator,
2946 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
2947 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
2948 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2949 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
2956 # nsterm*|Apple_Terminal - AppKit Terminal.app
2958 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
2959 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
2960 # Server and Mac OS X operating systems. There is also a
2961 # "terminal.app" in GNUstep, but I believe it to be an unrelated
2962 # codebase and I have not attempted to describe it here.
2964 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
2965 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
2966 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
2967 # version supports color.
2969 # To determine the version of Terminal.app you're using by running:
2971 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
2973 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
2975 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
2977 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
2979 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
2981 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
2983 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
2984 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
2985 # might work too, but really you're on your own here since these
2986 # systems are very obsolete and I can't test them. I do welcome
2987 # patches, though :).
2991 # For GNUstep_Terminal, you're probably best off using "linux" or
2992 # writing your own terminfo.
2994 # For MacTelnet, you're on your own. It's a different codebase, and
2995 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
2997 # For iTerm.app, see "iterm".
3000 # The AppKit Terminal.app descriptions all have names beginning with
3001 # "nsterm". Note that the statusline (-s) versions use the window
3002 # titlebar as a phony status line, and may produce warnings during
3003 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3004 # Ignore these warnings, or even ignore these entries entirely. Apps
3005 # which need to position the cursor or do other fancy stuff inside the
3006 # status line won't work with these entries. They're primarily useful
3007 # for programs like Pine which provide simple notifications in the
3008 # status line. Please note that non-ASCII characters don't work right
3009 # in the status line, since Terminal.app incorrectly interprets their
3010 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3011 # versions) or only accepts status lines consisting entirely of
3012 # characters from the first 256 Unicode positions (including C1 but
3015 # The Mythology* of AppKit Terminal.app:
3017 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3018 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3019 # shareware replacement for Terminal called "Stuart" which NeXT bought
3020 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3021 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3022 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3023 # capabilities for the early versions, but I believe that the
3024 # TERM_PROGRAM_VERSION may have been reset at some point.
3026 # The early versions were tailored to the NeXT character set. Sometime
3027 # after the Apple acquisition the encoding was switched to MacRoman
3028 # (initially with serious altcharset bugs due to incomplete conversion
3029 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3030 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3031 # 8-color support (initially buggy when combined with attributes, but
3032 # that was later fixed.) More recently, around Mac OS X version 10.3
3033 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3034 # some versions (for instance 133-1 which shipped with Mac OS X
3035 # version 10.4) this suffered from the <bce> bug, but that seems to
3036 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3038 # In the early days of Mac OS X the terminal was fairly buggy and
3039 # would routinely crash under load. Many of these bugs seem to have
3040 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3041 # some may still remain. This change seems to correspond to
3042 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3043 # it did previously.
3045 # * This may correspond with what actually happened, but I don't
3046 # know. It is based on guesswork, hearsay, private correspondence,
3047 # my faulty memory, and the following online sources and references:
3049 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3050 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3052 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3053 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3055 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3056 # "nsterm" to comply with the name length and case conventions and
3057 # limitations of various software packages [notably Solaris terminfo
3058 # and UNIX.] A single Apple_Terminal alias is retained for
3059 # backwards-compatibility.
3061 # * Added function key support (F1-F4). These only work in Terminal.app
3062 # version 51, hopefully the capabilities won't cause problems for people
3065 # * Added "full color" (-c) entries which support the 16-color mode in
3068 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3069 # support, so "ASCII" (-7) entries without altcharset support were
3072 # nsterm - AppKit Terminal.app
3074 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3075 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3076 # extensions. This terminfo was written to describe versions 41
3077 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3078 # version 10.1) of Terminal.app.
3080 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3081 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3082 # use, the executable for Terminal.app is:
3083 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3085 # If you're looking for a description of the full-screen system
3086 # console which runs under Apple's Darwin operating system on PowerPC
3087 # platforms, see the "xnuppc" entry instead.
3089 # There were no function keys in version 41. In version 51, there are
3090 # four working function keys (F1, F2, F3 and F4.) The function keys
3091 # are included in all of these entries.
3093 # It does not support mouse pointer position reporting. Under some
3094 # circumstances the cursor can be positioned using option-click; this
3095 # works by comparing the cursor position and the selected position,
3096 # and simulating enough cursor-key presses to move the cursor to the
3097 # selected position. This technique fails in all but the simplest
3100 # It provides partial ANSI color support (background colors interacted
3101 # badly with bold in version 41, though, as reflected in :ncv:.) The
3102 # monochrome (-m) entries are useful if you've disabled color support
3103 # or use a monochrome monitor. The full color (-c) entries are useful
3104 # in version 51, which doesn't exhibit the background color bug. They
3105 # also enable an xterm-compatible 16-color mode.
3107 # The configurable titlebar is set using xterm-compatible sequences;
3108 # it is used as a status bar in the statusline (-s) entries. Its width
3109 # depends on font sizes and window sizes, but 50 characters seems to
3110 # be the default for an 80x24 window.
3112 # The MacRoman character encoding is used for some of the alternate
3113 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3114 # disable alternate character set support entirely, and the "VT100"
3115 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3116 # graphics emulation, which seems to think the character encoding is
3117 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3118 # are useful in Terminal.app version 51, which supports UTF-8 and
3119 # other ASCII-compatible character encodings but does not correctly
3120 # implement VT100 graphics; once VT100 graphics are correctly
3121 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3122 # usable in any ASCII-compatible character encoding [except perhaps
3123 # in UTF-8, where some experts argue for disallowing alternate
3124 # characters entirely.]
3126 # Terminal.app reports "vt100" as the terminal type, but exports
3127 # several environment variables which may aid detection in a shell
3128 # profile (i.e. .profile or .login):
3131 # TERM_PROGRAM=Apple_Terminal
3132 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3133 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3135 # For example, the following Bourne shell script would detect the
3136 # correct terminal type:
3138 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3141 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3149 # In a C shell derivative, this would be accomplished by:
3151 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3152 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3153 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3154 # setenv TERM "nsterm-old"
3156 # setenv TERM "nsterm-c-7"
3161 # The '+' entries are building blocks
3162 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3163 am, bw, msgr, xenl, xon,
3164 cols#80, it#8, lines#24,
3165 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3166 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3167 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3168 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3169 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3170 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3171 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3172 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3173 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3174 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3175 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3176 %p5%t;2%;%?%p7%t;8%;m,
3177 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3178 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3180 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3181 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3182 enacs=\E(B\E)0, rmacs=^O,
3183 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3184 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3185 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3187 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3188 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
3189 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3190 \271|\255}\243~\245,
3191 enacs=\E(B\E)0, rmacs=^O,
3192 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3193 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3194 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3196 # compare with xterm+sl-twm
3197 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3198 wsl#50, use=xterm+sl-twm,
3200 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3201 op=\E[0m, use=ibm+16color,
3203 nsterm+c41|AppKit Terminal.app v41 color support,
3204 colors#8, ncv#37, pairs#64,
3205 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3207 # These are different combinations of the building blocks
3209 # ASCII charset (-7)
3210 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3213 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3214 use=nsterm+s, use=nsterm+7,
3216 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3217 use=nsterm+c41, use=nsterm+7,
3219 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3220 use=nsterm+c, use=nsterm+7,
3222 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3223 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3225 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3226 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3228 # VT100 alternate-charset (-acs)
3229 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3232 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3233 use=nsterm+s, use=nsterm+acs,
3235 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3236 use=nsterm+c41, use=nsterm+acs,
3238 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3239 use=nsterm+c, use=nsterm+acs,
3241 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3242 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3244 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3245 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3248 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3251 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3252 use=nsterm+s, use=nsterm+mac,
3254 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3255 use=nsterm+c41, use=nsterm+mac,
3257 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3258 use=nsterm+c, use=nsterm+mac,
3260 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3261 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3263 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3264 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3266 # In Mac OS X version 10.5 the format of the preferences has changed
3267 # and a new, more complex technique is needed, e.g.,
3269 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3270 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3271 # ud.init();prefs=ud.persistentDomainForName_(
3272 # "com.apple.Terminal");prefs["Window Settings"][
3273 # prefs["Default Window Settings"]]["TerminalType"
3274 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3275 # "com.apple.Terminal")' nsterm-16color
3277 # and it is still not settable from the preferences dialog. This is
3278 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3279 # in Apple's bug reporter.
3281 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
3282 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3283 # vt52, vt100, vt102 and xterm.
3284 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3286 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
3287 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
3288 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
3289 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3290 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3291 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
3292 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3293 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3294 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
3295 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
3297 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3298 # the background color erase feature. The newer version 240.2 in Mac OS X
3299 # version 10.5 does not.
3301 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3302 # and D P Schreber comparing to nsterm-c-s-acs.
3304 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3305 # can be set in Terminal.app, e.g.,
3307 # defaults write com.apple.Terminal TermCapString nsterm-bce
3309 # and that it is not set in Terminal's preferences dialog.
3311 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3314 # * The terminal description matches the default settings.
3315 # * The keyboard is configurable via a dialog.
3316 # * By default khome, kend, knext and kprev are honored only with a
3318 # * There are bindings for control left/right arrow (but not up/down).
3319 # Added those to nsterm-16color, which is the version used for OS X 10.6
3320 # * "Allow VT100 application keypage mode" is by default disabled.
3321 # There is no way to press keypad-comma unless application mode is enabled
3323 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3324 # * CHT, REP, SU, SD are buggy.
3325 # * ECH works (also in Leopard), but is not used here for compatibility.
3326 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3327 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3328 # nsterm entry from this file to override the MacPorts (20110404) or
3329 # system (20081102) copy of this file.
3330 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3331 # dialog defaults to xterm-256color. Alternative selections are ansi,
3332 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3333 # the menu says "Declare terminal as" without promising to actually emulate
3334 # the corresponding terminals. Indeed, changing TERM does not affect the
3335 # emulation itself. This means that
3336 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3338 # + the color model is the same for each setting of TERM (does not match
3340 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3341 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3342 # + the vt52 emulation does not give a usable shell because screen-clearing
3343 # does not work as expected.
3344 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3345 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3346 # as well as unmasking F10 (which had been used in the window manager). Those
3347 # keys are listed in this entry.
3348 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3349 bce, use=nsterm-16color,
3351 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3352 # TERM_PROGRAM_VERSION=309
3353 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3354 # TERM_PROGRAM_VERSION=303
3355 nsterm-256color|Terminal.app in OS X 10.8,
3356 use=xterm+256setaf, use=nsterm-bce,
3358 # removed bogus kDC7 -TD
3359 nsterm-build326|Terminal.app in OS X 10.9,
3360 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3361 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3362 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-256color,
3365 nsterm-build343|Terminal.app in OS X 10.10,
3366 kend=\EOF, khome=\EOH, use=nsterm-build326,
3368 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3370 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
3371 # + f1-f4 map to pf1-pf4
3372 # + no vt220 support aside from DECTCEM and ECH
3373 # + there are no protected areas. Forget about anything above vt220.
3374 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3375 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3376 # + but bce fails for 11.6.7.2 (test repeat).
3377 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3378 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3379 # + normal (not X10 or Highlight tracking) mouse now works.
3380 # + mouse any-event works
3381 # + mouse button-event works
3382 # + in alternate screen:
3384 # mode 1047 fails to restore cursor position (do not use)
3385 # mode 1049 fails to restore screen contents (do not use)
3386 # + dtterm window-modify operations work (some messages are not printed)
3387 # + dtterm window-report gives size of window in characters/pixels as
3388 # well as state of window.
3390 # + there is no difference between cnorm/cvvis
3391 # + has dim/invis/blink (no protect of course)
3392 # + most function keys with shift/control modifiers give beep
3393 # (user can configure, but out-of-the-box is what I record)
3394 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3396 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3397 # + kLFT/kRIT work, but not up/down with shift-modifier
3398 # + there are a few predefined bindings with Alt, but no clear pattern.
3399 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3400 # Using ncurses test-program with xterm-new:
3402 # Using xterm's scripts:
3403 # + palette for 256-colors is hardcoded.
3404 # + no support for "dynamic colors"
3405 # + no support for tcap-query.
3406 nsterm-build361|Terminal.app in OS X 10.11,
3408 kmous=\E[M, use=nsterm-build343,
3410 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3411 # Comparing with build361, little has changed, except that italics work.
3412 # Direct-color is not supported, by the way.
3414 # Improved rmso/rmul -TD
3415 nsterm-build400|Terminal.app in OS X 10.13,
3416 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3417 use=ecma+italics, use=nsterm-build361,
3419 # This is an alias which should always point to the "current" version
3420 nsterm|Apple_Terminal|AppKit Terminal.app,
3421 use=nsterm-build400,
3427 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3428 # featureful) terminal emulator for Mac OS X. It is similar enough in
3429 # capabilities to nsterm-16color that I have derived this description from that
3430 # one, but as far as I know they share no code. Many of the features are
3431 # user-configurable, but I attempt only to describe the default configuration
3434 # According to its documentation, iTerm uses terminfo to obtain function key
3435 # definitions. For example, if it is started with TERM=xterm, it uses key
3436 # definitons from that terminal description from the local OSX machine. Those
3437 # $TERM settings may be augmented using the bookmark and profile dialogs.
3438 # However, the behavior seen with tack does not agree with either the terminfo
3439 # description or the function keys in its "xterm" profile.
3443 # reports primary DA as VT100 with AVO: \E[?1;2c
3444 # reports secondary DA as "\E[>0;95;c"
3445 # supports blink and underline
3446 # displays bold text as red
3447 # recognizes all dtterm controls for modifying/querying window
3448 # resizing via escape sequence is very slow
3449 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3450 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3451 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3454 # with ncurses test-program:
3455 # ncurses 'k' has problem in second screen; light background does not fill
3456 # with xterm scripts
3457 # can display/alter xterm-256color cube
3458 # can display/alter xterm-88color cube
3459 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3460 am, bce, hs, mir, msgr, npc, xenl, xon,
3461 cols#80, it#8, lines#24, wsl#50,
3462 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3463 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3464 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3465 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3466 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3467 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3468 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3469 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3470 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3471 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3472 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3473 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3474 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3475 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3476 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3477 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3478 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3479 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3480 rmso=\E[m, rmul=\E[m,
3481 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3482 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3484 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3485 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3486 tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3487 use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
3488 use=xterm+x11mouse, use=xterm+256setaf,
3492 # https://www.iterm2.com/
3493 # https://github.com/gnachman/iTerm2
3494 # ~/Library/Preferences/com.googlecode.iterm2.plist
3495 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3499 # reports primary DA as VT100 with AVO: \E[?1;2c
3500 # reports secondary DA as "\E[>0;95;0c"
3501 # numeric keypad application mode does not work
3502 # by default, dtterm window-modifications are ignored
3503 # by default, dtterm window-reports return, but icon as "L", window as "l"
3504 # supports SD/SU, no REP, SL, SR
3505 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3506 # no improvement to XFree86 1047/1048 modes
3508 # in meta-mode, imitates xterm, sending UTF-8
3509 # special-key modifiers based on xterm use incompatible default for alt/meta
3510 # with ncurses test-program:
3512 # no improvement to ncurses 'k'
3513 # with xterm scripts:
3516 # Italic text did not work initially, apparently because upgrading did not
3517 # add/change that preference (set in Preferences, Profiles, Text). A new
3518 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3519 # option in the preferences dialog).
3521 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3522 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3523 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3524 blink=\E[5m, cbt=\E[Z, dim=\E[2m, indn=\E[%p1%dS,
3525 kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@,
3526 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3527 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3528 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3529 kf23=\E[23;2~, kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A,
3530 nel=\EE, op=\E[39;49m, rin=\E[%p1%dT, rmso=\E[27m,
3531 rmul=\E[24m, rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3532 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3533 %p5%t;2%;m%?%p9%t\016%e\017%;,
3534 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3535 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3536 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3537 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3538 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3539 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3540 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3541 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3542 kUP5=\E[1;5A, kUP6=\E[1;6A, use=xterm+alt+title,
3543 use=ecma+italics, use=iterm,
3545 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3547 # On PowerPC platforms, Apple's Darwin operating system uses a
3548 # full-screen system console derived from a NetBSD framebuffer
3549 # console. It is an ANSI-style terminal, and is not really VT-100
3552 # Under Mac OS X, this is the system console driver used while in
3553 # single-user mode [reachable by holding down Command-S during the
3554 # boot process] and when logged in using console mode [reachable by
3555 # typing ">console" at the graphical login prompt.]
3557 # If you're looking for a description of the Terminal.app terminal
3558 # emulator which runs under the Mac OS X Quartz windowing system (and
3559 # other AppKit-supported windowing systems,) see the "nsterm"
3562 # NOTE: Under Mac OS X version 10.1, the default login window does not
3563 # prompt for user name, instead requiring an icon to be selected from
3564 # a list of known users. Since the special ">console" login is not in
3565 # this list, you must make one of two changes in the Login Window
3566 # panel of the Login section of System Prefs to make the special
3567 # ">console" login accessible. The first option is to enable 'Show
3568 # "Other User" in list for network users', which will add a special
3569 # "Other..." icon to the graphical login panel. Selecting "Other..."
3570 # will present the regular graphical login prompt. The second option
3571 # is to change the 'Display Login Window as:' setting to 'Name and
3572 # password entry fields', which replaces the login panel with a
3573 # graphical login prompt.
3575 # There are no function keys, at least not in Darwin 1.3.
3577 # It has no mouse support.
3579 # It has full ANSI color support, and color combines correctly with
3580 # all three supported attributes: bold, inverse-video and underline.
3581 # However, bold colored text is almost unreadable (bolding is
3582 # accomplished using shifting and or-ing, and looks smeared) so bold
3583 # has been excluded from the list of color-compatible attributes
3584 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3585 # monochrome monitor.
3587 # There is one serious bug with this terminal emulation's color
3588 # support: repositioning the cursor onto a cell with non-matching
3589 # colors obliterates that cell's contents, replacing it with a blank
3590 # and displaying a colored cursor in the "current" colors. There is
3591 # no complete workaround at present [other than using the monochrome
3592 # (-m) entries,] but removing the (msgr) capability seemed to help.
3594 # The "standout" chosen was simple reverse-video, although a colorful
3595 # standout might be more aesthetically pleasing. Similarly, the bold
3596 # chosen is the terminal's own smeared bold, although a simple
3597 # color-change might be more readable. The color-bold (-b) entries
3598 # uses magenta colored text for bolding instead. The fancy color (-f
3599 # and -f2) entries use color for bold, standout and underlined text
3600 # (underlined text is still underlined, though.)
3602 # Apparently the terminal emulator does support a VT-100-style
3603 # alternate character set, but all the alternate character set
3604 # positions have been left blank in the font. For this reason, no
3605 # alternate character set capabilities have been included in this
3606 # description. The console driver appears to be ASCII-only, so (enacs)
3607 # has been excluded [although the VT-100 sequence does work.]
3609 # The default Mac OS X and Darwin installation reports "vt100" as the
3610 # terminal type, and exports no helpful environment variables. To fix
3611 # this, change the "console" entry in /etc/ttys from "vt100" to
3612 # "xnuppc-WxH", where W and H are the character dimensions of your
3613 # console (see below.)
3615 # The font used by the terminal emulator is apparently one originally
3616 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3617 # file includes descriptions for the following geometries:
3619 # Pixels Characters Entry Name (append -m for monochrome)
3620 # -------------------------------------------------------------------
3621 # 640x400 80x25 xnuppc-80x25
3622 # 640x480 80x30 xnuppc-80x30
3623 # 720x480 90x30 xnuppc-90x30
3624 # 800x600 100x37 xnuppc-100x37
3625 # 896x600 112x37 xnuppc-112x37
3626 # 1024x640 128x40 xnuppc-128x40
3627 # 1024x768 128x48 xnuppc-128x48
3628 # 1152x768 144x48 xnuppc-144x48
3629 # 1280x1024 160x64 xnuppc-160x64
3630 # 1600x1024 200x64 xnuppc-200x64
3631 # 1600x1200 200x75 xnuppc-200x75
3632 # 2048x1536 256x96 xnuppc-256x96
3634 # The basic "xnuppc" entry includes no size information, and the
3635 # emulator includes no reporting capability, so you'll be at the mercy
3636 # of the TTY device (which reports incorrectly on my hardware.) The
3637 # color-bold entries do not include size information.
3639 # The '+' entries are building blocks
3640 xnuppc+basic|Darwin PowerPC Console basic capabilities,
3643 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3644 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3645 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3646 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3647 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3648 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3649 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3650 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3652 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3653 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3654 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3656 xnuppc+c|Darwin PowerPC Console ANSI color support,
3657 colors#8, ncv#32, pairs#64,
3658 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3660 xnuppc+b|Darwin PowerPC Console color-bold support,
3663 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3666 xnuppc+f|Darwin PowerPC Console fancy color support,
3668 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3670 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3672 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
3675 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3676 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3678 # Building blocks for specific screen sizes
3679 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
3682 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
3685 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
3688 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
3691 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
3694 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
3697 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
3700 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
3703 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
3706 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
3709 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
3712 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
3713 cols#0x100, lines#96,
3715 # These are different combinations of the building blocks
3717 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
3720 xnuppc|darwin|Darwin PowerPC Console (color),
3721 use=xnuppc+c, use=xnuppc+basic,
3723 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
3726 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
3727 use=xnuppc+b, use=xnuppc+c,
3729 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
3732 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
3733 use=xnuppc+f, use=xnuppc+c,
3735 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
3738 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
3739 use=xnuppc+f2, use=xnuppc+c,
3741 # Combinations for specific screen sizes
3742 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
3743 use=xnuppc+80x25, use=xnuppc+basic,
3745 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
3746 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3748 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
3749 use=xnuppc+80x30, use=xnuppc+basic,
3751 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
3752 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3754 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
3755 use=xnuppc+90x30, use=xnuppc+basic,
3757 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
3758 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3760 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
3761 use=xnuppc+100x37, use=xnuppc+basic,
3763 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
3764 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3766 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
3767 use=xnuppc+112x37, use=xnuppc+basic,
3769 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
3770 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3772 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
3773 use=xnuppc+128x40, use=xnuppc+basic,
3775 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
3776 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3778 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
3779 use=xnuppc+128x48, use=xnuppc+basic,
3781 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
3782 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3784 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
3785 use=xnuppc+144x48, use=xnuppc+basic,
3787 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
3788 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3790 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
3791 use=xnuppc+160x64, use=xnuppc+basic,
3793 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
3794 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3796 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
3797 use=xnuppc+200x64, use=xnuppc+basic,
3799 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
3800 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3802 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
3803 use=xnuppc+200x75, use=xnuppc+basic,
3805 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
3806 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
3808 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
3809 use=xnuppc+256x96, use=xnuppc+basic,
3811 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
3812 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
3814 ######## DOS/WINDOWS
3815 # CRT is shareware. It implements some xterm features, including mouse.
3816 crt|crt-vt220|CRT 2.3 emulating VT220,
3819 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3822 # PuTTY 0.55 (released 3 August 2004)
3823 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3825 # Comparing with 0.51, vttest is much better (only a few problems with the
3826 # cursor position reports and wrapping).
3828 # PuTTY 0.51 (released 14 December 2000)
3830 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3831 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3832 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3833 # to xterm, which is incorrect, since several features are misimplemented:
3835 # Alt+key always sends ESC+key, so 'km' capability is removed.
3837 # Control responses, wrapping and tabs are buggy, failing a couple of
3838 # screens in vttest.
3840 # xterm mouse support is not implemented (unrelease version may).
3842 # Several features such as backspace/delete are optional; this entry documents
3843 # the default behavior -TD
3845 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
3846 # but implements it incorrectly as mentioned here:
3847 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
3848 putty|PuTTY terminal emulator,
3849 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3850 colors#8, it#8, ncv#22, pairs#64, U8#1,
3851 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3852 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3853 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3854 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3855 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3856 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3857 dch=\E[%p1%dP, dch1=\E[P,
3858 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3859 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3860 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3861 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3862 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3863 %%G\340\202\242\E%%@%e%p1%c%;,
3864 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3865 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3866 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3867 il1=\E[L, ind=\n, indn=\E[%p1%dS,
3868 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3869 %02x%p4%{255}%*%{1000}%/%02x,
3870 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3871 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3872 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3873 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3874 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3875 kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3876 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3877 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3878 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3879 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3880 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3881 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3882 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3883 %;m%?%p9%t\016%e\017%;,
3884 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3885 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3886 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3887 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3888 vt100-putty|Reset PuTTY to pure vt100,
3889 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3891 putty-256color|PuTTY 0.58 with xterm 256-colors,
3892 use=xterm+256setaf, use=putty,
3893 putty-noapp|putty with cursor keys in normal mode,
3894 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3895 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3898 # One of the keyboard selections is "VT100+".
3899 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3900 putty-vt100|VT100+ keyboard layout,
3901 use=putty+fnkeys+vt100, use=putty,
3903 putty-sco|putty with SCO function keys,
3904 use=putty+fnkeys+sco, use=putty,
3906 # PuTTY has more than one section in its Keyboard configuration:
3907 # a) backspace/delete, which we ignore since that choice largely depends on
3908 # whether one matches Unix and BSD or Linux.
3909 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3910 # are unrelated to rxvt's actual settings.
3911 # c) function keys and keypad - this is the interesting part. None of the
3912 # selections match any of their respective namesakes, but they are shown
3913 # here to help users who expect that the selections do what is implied.
3915 # This is the default setting for PuTTY
3916 putty+fnkeys|fn-keys for PuTTY,
3917 use=putty+fnkeys+esc,
3919 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3920 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3921 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3922 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3923 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3924 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3926 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3927 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3928 use=putty+fnkeys+esc,
3930 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3931 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3932 use=putty+fnkeys+esc,
3934 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3935 use=putty+fnkeys+esc,
3937 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3939 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3940 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3941 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3942 kf9=\EOX, use=putty+fnkeys+esc,
3944 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3946 # Use modifiers to obtain function keys past 12:
3949 # F25-F36 - control/alt
3950 # F37-F48 - control/shift
3952 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3953 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3954 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3955 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3956 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3957 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3958 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3959 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3960 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3961 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3962 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3963 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3964 kich1=\E[L, knp=\E[G, kpp=\E[I,
3968 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3969 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3970 # (communication program) which supports:
3972 # - Serial port connections.
3973 # - TCP/IP (telnet) connections.
3974 # - VT100 emulation, and selected VT200/300 emulation.
3975 # - TEK4010 emulation.
3976 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3978 # - Scripts using the "Tera Term Language".
3979 # - Japanese and Russian character sets.
3981 # The program does not come with terminfo or termcap entries. However, the
3982 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3983 # vt52 or doublesize character support; blinking is done with color). Besides
3984 # the HPA, VPA extensions it also implements CPL and CNL.
3986 # All of the function keys can be remapped. This description shows the default
3987 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3988 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3989 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3997 # ANSI colors are implemented, but cannot be combined with video attributes
3998 # except for reverse.
4000 # No fonts are supplied with the program, so the acsc string is chosen to
4001 # correspond with the default Microsoft terminal font.
4003 # Tera Term recognizes some xterm sequences, including those for setting and
4004 # retrieving the window title, and for setting the window size (i.e., using
4005 # "resize -s"), though it does not pass SIGWINCH to the application if the
4006 # user resizes the window with the mouse.
4007 teraterm2.3|Tera Term Pro,
4010 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4011 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4012 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4013 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
4014 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4015 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4016 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4017 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
4018 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
4019 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4020 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4021 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4022 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4023 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4024 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
4025 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4026 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
4027 use=klone+color, use=vt100,
4029 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4030 # to choose a Windows OEM font).
4032 # Testing with tack:
4033 # - it does not have xenl (suppress that)
4034 # - underline seems to work with color (modify ncv).
4035 # Testing with vttest:
4036 # - wrapping differs from vt100 (menu 1).
4037 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4039 # - it recognizes the dtterm window controls for reporting size in
4040 # characters and pixels.
4041 # - it passes SIGWINCH.
4042 teraterm4.59|Tera Term Pro,
4045 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4046 kmous=\E[M, use=teraterm2.3,
4050 # Testing with tack:
4051 # - no bell (flash works)
4052 # - bold is yellow, blink is red.
4053 # - default keyboard sends ^? for Delete, can be configured for kdch1
4055 # Testing with vttest:
4056 # + autowrap has problems...
4057 # + color-tests for bce feature match xterm's behavior
4058 # + handles most of xterm's mouse-controls other than highlight-tracking.
4059 # xterm's SGR 1006 works.
4060 # + partial support for DEC locator-events
4061 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4062 # + has a "Tek" window, but does not work with vttest's examples
4063 # + supports the dtterm window modify/report controls
4064 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4066 # + VT220 screen-display tests are ok
4069 # + recognizes xterm's original direct-colors sequences, but result is
4071 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4072 teraterm4.97|Tera Term Pro,
4073 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4074 teraterm-256color|TeraTerm with xterm 256-colors,
4075 use=xterm+256setaf, use=teraterm,
4080 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4081 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4084 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4085 # for casual (occasional) use. Also fails several of the vttest screens,
4086 # but that is not unusual for vt100 "emulators".
4087 # b) Does not implement vt100 keypad
4088 # c) Recognizes a subset of vt52 controls.
4089 ms-vt100|MS telnet imitating dec vt100,
4091 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4092 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4093 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4094 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4095 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4097 # Tested with Windows 2000, the telnet application runs in a console window,
4098 # also using 'Terminal' font.
4101 # a) This version has no function keys or numeric keypad. Unlike the older
4102 # version, the numeric keypad is entirely ignored.
4103 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4104 ms-vt100-color|vtnt|windows 2000 ansi (sic),
4106 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4109 # Based on comments from Federico Bianchi:
4111 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4112 # scheme for PF keys.
4114 # and PuTTY wishlist:
4116 # The modifiers are represented as the codes listed above, prefixed to
4117 # the normal sequences. If the modifier is pressed alone, its sequence
4118 # is transmitted twice in succession. If multiple modifiers apply,
4119 # they're transmitted in the order shift, control, alt.
4124 ms-vt100+|vt100+|windows XP vt100+ (sic),
4125 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4126 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4127 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4128 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4129 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4130 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4131 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4132 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4133 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4134 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4135 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4136 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4137 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4138 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4139 knp=\E/, kpp=\E?, use=ms-vt100-color,
4141 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
4145 ######## X TERMINAL EMULATORS
4148 # You can add the following line to your .Xdefaults to change the terminal type
4149 # set by the xterms you start up to my-xterm:
4151 # *termName: my-xterm
4153 # System administrators can change the default entry for xterm instances
4154 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4155 # case, xterm will detect and reject an invalid terminal type, falling back
4156 # to the default of xterm.
4159 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4160 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4161 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4162 # as these seem not to work -- esr)
4163 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4164 OTbs, am, km, mir, msgr, xenl, xon,
4165 cols#80, it#8, lines#65,
4166 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4167 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4168 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4169 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4170 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4171 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4172 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4173 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4174 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4175 smso=\E[7m, smul=\E[4m,
4176 # Compatible with the R5 xterm
4177 # (from the XFree86 3.2 distribution, <blink=@> removed)
4178 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4179 # corrected typos in rs2 string - TD
4181 xterm-r5|xterm R5 version,
4182 OTbs, am, km, msgr, xenl,
4183 cols#80, it#8, lines#24,
4184 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4185 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4186 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4187 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4188 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4189 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4190 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4191 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
4192 kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
4193 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
4194 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4195 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
4196 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4197 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4198 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4200 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4202 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4203 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
4204 # Compatible with the R6 xterm
4205 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4206 # added khome/kend, hts based on the R6 xterm code - TD
4207 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4208 # for compatibility with other emulators).
4209 xterm-r6|xterm X11R6 version,
4210 OTbs, am, km, mir, msgr, xenl,
4211 cols#80, it#8, lines#24,
4212 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4213 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4214 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4215 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4216 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4217 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4218 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4220 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4221 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4222 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4223 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4224 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4225 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4226 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4227 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4228 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4229 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4230 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4231 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4232 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4233 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4234 use=xterm+kbs, use=vt100+enq,
4235 xterm-old|antique xterm version,
4237 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4238 # The name has been changed and some aliases have been removed.
4239 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4240 OTbs, am, bce, km, mir, msgr, xenl, XT,
4241 cols#80, it#8, lines#24, ncv@,
4242 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4243 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4244 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4245 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4246 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4247 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4248 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4249 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4250 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4251 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4253 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4254 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4255 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4256 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4257 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4258 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4259 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4260 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4261 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4262 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4263 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4264 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4266 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4268 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4270 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4271 %;m%?%p9%t\016%e\017%;,
4272 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4273 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4274 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4275 use=ecma+color, use=vt220+keypad,
4277 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4278 # codes for F1-F4 except while in VT220 mode.
4279 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4280 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4282 # This version was released in XFree86 3.3.3 (November 1998).
4283 # Besides providing printer support, it exploits a new feature that allows
4284 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4285 # -- the distribution contained incorrect khome/kend values -TD
4286 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4287 blink=\E[5m, ich1@, invis=\E[8m,
4288 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4289 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4290 rs2=\E[!p\E[?3;4l\E[4l\E>,
4291 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4292 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4293 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4296 # This version was released in XFree86 4.0.
4297 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4299 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4300 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4301 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4302 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4303 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4304 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4305 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4306 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4307 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4308 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4309 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4310 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4311 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4312 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4313 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4315 smcup=\E[?1049h, use=xterm-xf86-v333,
4317 # This version was released in XFree86 4.3.
4318 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4319 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4320 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4322 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4323 %p7%t;8%;m%?%p9%t\016%e\017%;,
4326 # This version was released in XFree86 4.4.
4327 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4328 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4329 rin=\E[%p1%dT, use=xterm-xf86-v43,
4331 xterm-xfree86|xterm terminal emulator (XFree86),
4334 # This version reflects the current xterm features.
4335 xterm-new|modern xterm terminal emulator,
4337 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4338 rin=\E[%p1%dT, use=ansi+rep, use=ecma+strikeout,
4339 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4342 # This fragment is for people who cannot agree on what the backspace key
4344 xterm+kbs|fragment for backspace key,
4347 # This fragment describes as much of XFree86 xterm's "pc-style" function
4348 # keys as will fit into terminfo's 60 function keys.
4351 # ---------------------------------
4358 # 8 Shift + Alt + Control
4359 # ---------------------------------
4360 # The meta key may also be used as a modifier in this scheme, adding another
4361 # bit to the parameter.
4362 xterm+pcfkeys|fragment for PC-style fkeys,
4363 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4366 xterm+noapp|fragment with cursor keys in normal mode,
4367 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4370 xterm+app|fragment with cursor keys in application mode,
4371 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4374 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4375 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4376 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4378 # The original assignments from patch #94 for cursor-keys had some technical
4381 # A parameter for a function-key to represent a modifier is just more
4382 # bits. But for a cursor-key it may change the behavior of the
4383 # application. For instance, emacs decodes the first parameter of a
4384 # cursor-key as a repeat count.
4386 # A parameterized string should (really) not begin with SS3 (\EO).
4387 # Rather, CSI (\E[) should be used.
4389 # For these reasons, the original assignments were deprecated. For
4390 # compatibility reasons, they are still available as a setting of xterm's
4391 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4392 # that might apply to xterm+pcfkeys with different values of that resource.
4394 # These entries will have warnings when checking with tic because the kri/kind
4395 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
4396 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
4397 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
4399 # * modify xterm-new terminfo entry to use capabilities for shifted
4400 # scroll forward/reverse as shifted cursor up/down.
4402 # In the 1980s when terminfo was defined, the developers made more of
4403 # a distinction between shifted up/down versus shifted left/right since most
4404 # terminals can index (scroll up/down), while few can scroll left/right.
4405 xterm+pcc3|fragment with modifyCursorKeys:3,
4406 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4407 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4408 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4409 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4410 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4411 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4412 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4413 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4416 xterm+pcc2|fragment with modifyCursorKeys:2,
4417 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4418 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4419 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4420 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4421 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4422 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4423 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4425 xterm+pcc1|fragment with modifyCursorKeys:1,
4426 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4427 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4428 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4429 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4430 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4431 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4433 xterm+pcc0|fragment with modifyCursorKeys:0,
4434 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4435 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4436 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4437 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4438 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4439 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4442 # Here are corresponding fragments from xterm patch #216:
4444 xterm+pcf0|fragment with modifyFunctionKeys:0,
4445 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4446 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4447 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4448 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4449 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4450 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4451 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4452 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4453 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4454 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4455 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4456 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4457 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4458 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4459 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4460 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4461 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4463 xterm+pcf2|fragment with modifyFunctionKeys:2,
4464 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4465 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4466 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4467 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4468 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4469 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4470 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4471 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4472 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4473 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4474 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4475 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4476 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4477 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4478 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4479 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4480 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4481 kf8=\E[19~, kf9=\E[20~,
4483 # Chunks from xterm #230:
4484 xterm+pce2|fragment with modifyCursorKeys:2,
4485 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4486 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4487 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4488 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4489 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4490 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4491 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4492 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4493 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4494 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4495 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4498 xterm+edit|fragment for 6-key editing-keypad,
4499 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4502 xterm+pc+edit|fragment for pc-style editing keypad,
4503 kend=\E[4~, khome=\E[1~,
4505 xterm+vt+edit|fragment for vt220-style editing keypad,
4506 kfnd=\E[1~, kslt=\E[4~,
4508 # These variations for alternate-screen and title-stacking were introduced by
4510 xterm+noalt|xterm without altscreen,
4513 xterm+alt1049|xterm 90 feature,
4514 rmcup=\E[?1049l, smcup=\E[?1049h,
4516 xterm+titlestack|xterm 251 feature,
4517 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
4519 xterm+alt+title|xterm 90 and 251 features combined,
4520 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
4522 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4523 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4524 # is shown here (because that is used in mrxvt and mlterm):
4525 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4526 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4527 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4528 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4529 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4530 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4531 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4532 kf63=\E[13;4~, use=xterm+pcf2,
4534 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4535 xterm-basic|modern xterm terminal emulator - common,
4536 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4537 colors#8, cols#80, it#8, lines#24, pairs#64,
4538 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4539 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4540 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4541 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4542 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4543 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4544 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4545 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4546 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4547 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4548 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4549 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4550 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4551 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
4552 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4553 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
4555 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4557 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4559 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4560 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4561 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
4562 smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m,
4563 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics,
4564 use=ansi+pp, use=xterm+kbs, use=xterm+alt+title,
4567 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4568 # In retrospect, something like xterm-r6 was intended here -TD
4569 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4570 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4574 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4577 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4578 # xterm also recognizes the control sequences for initc -TD
4579 xterm-16color|xterm with 16 colors like aixterm,
4581 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4582 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4583 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4586 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4587 # xterm patch #111 (1999/7/10) -TD
4588 xterm+256color|xterm 256-color feature,
4590 colors#0x100, pairs#0x10000,
4591 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4592 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4594 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4596 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4600 # palette is hardcoded...
4601 xterm+256setaf|xterm 256-color (set-only),
4603 colors#0x100, pairs#0x10000,
4604 initc@, op=\E[39;49m,
4605 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4607 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4611 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4612 # xterm patch #115 (1999/9/18) -TD
4614 # Note that the escape sequences used are the same as for 256-colors - xterm
4615 # has a different table of default color resource values. If built for
4616 # 256-colors, it can still handle an 88-color palette by using the initc
4619 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4620 # which support the xterm+256color feature support the associated initc
4621 # capability. So it is cancelled in the entries which use this and/or the
4622 # xterm+256color block.
4624 # The default color palette for the 256- and 88-colors are different. A
4625 # given executable will have one palette (perhaps compiled-in). If the program
4626 # supports xterm's control sequence, it can be programmed using initc.
4627 xterm+88color|xterm 88-color feature,
4628 colors#88, pairs#7744, use=xterm+256color,
4630 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4631 xterm-256color|xterm with 256 colors,
4632 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4633 xterm-88color|xterm with 88 colors,
4634 rs1=\Ec\E]104\007, use=xterm+88color,
4637 # Emacs 26.1 and later support direct color mode in terminals, using a
4638 # combination of user-defined capabilities and ncurses-dependent function
4639 # calls. We will not include that here.
4641 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
4642 # is of interest only to the numerically illiterate), is compatible with other
4643 # terminal descriptions written for curses. It relies upon the extended range
4644 # for numeric capabilities provided in ncurses 6.1:
4645 xterm+direct2|xterm with direct-color indexing,
4647 colors#0x1000000, pairs#0x10000,
4648 initc@, op=\E[39;49m,
4649 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
4650 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4651 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
4652 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4654 xterm-direct2|xterm with direct-color indexing (old),
4655 use=xterm+direct2, use=xterm+titlestack, use=xterm,
4657 # That in turn had a problem: in the original patch submitted for KDE konsole
4658 # in 2006, the submitter and the developer alike overlooked a "color space
4659 # identifier" parameter. This version provides for that parameter:
4660 xterm+direct|xterm with direct-color indexing,
4662 colors#0x1000000, pairs#0x10000,
4663 initc@, op=\E[39;49m,
4664 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
4665 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4666 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
4667 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4669 xterm-direct|xterm with direct-color indexing,
4670 use=xterm+direct, use=xterm,
4672 # Here are corresponding flavors for terminals which could use the feature:
4673 iterm2-direct|iTerm2 with direct-color indexing,
4674 use=xterm+direct, use=iterm2,
4675 mlterm-direct|mlterm with direct-color indexing,
4676 use=xterm+direct, use=mlterm,
4678 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
4679 # that xterm's original implementation should have used colons for the
4680 # subparameter separators, but chose not to correct this in konsole. As of
4681 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
4682 xterm+indirect|xterm with direct-color indexing (old),
4684 colors#0x1000000, pairs#0x10000,
4685 initc@, op=\E[39;49m,
4686 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
4687 %/%{255}%&%d;%p1%{255}%&%d%;m,
4688 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
4689 %/%{255}%&%d;%p1%{255}%&%d%;m,
4691 konsole-direct|konsole with direct-color indexing,
4692 use=xterm+indirect, use=konsole,
4693 st-direct|st with direct-color indexing,
4694 use=xterm+indirect, use=st,
4695 vte-direct|vte with direct-color indexing,
4696 use=xterm+indirect, use=vte,
4699 # + Apple's Terminal.app does not recognize either form of the direct-color
4701 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
4702 # the colors. Like vte, it is a subset of xterm, although different
4703 # omissions/reservations of modified-keys are seen in testing.
4704 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
4705 # nothing useful with the colors.
4706 # + Teraterm 4.97, like PuTTY (no good).
4707 # + terminology 0.91 recognizes xterm's original implementation, but does
4708 # nothing useful with it.
4712 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4713 # asked for some of xterm's advanced features to be added to its terminfo
4714 # entry. It defines extended capabilities not found in standard terminfo or
4715 # termcap. These are useful in tmux, for instance, hence the name.
4717 # One caveat in adding extended capabilities in ncurses is that if the names
4718 # are longer than two characters, then they will not be visible through the
4719 # termcap interface.
4721 # Ms modifies the selection/clipboard. Its parameters are
4722 # p1 = the storage unit (clipboard, selection or cut buffer)
4723 # p2 = the base64-encoded clipboard content.
4725 # Ss is used to set the cursor style as described by the DECSCUSR
4726 # function to a block or underline.
4727 # Se resets the cursor style to the terminal power-on default.
4729 # Cs and Cr set and reset the cursor colour.
4730 xterm+tmux|advanced xterm features used in tmux,
4731 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4732 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4734 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4735 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4736 # To use it, your decTerminalID resource must be set to 200 or above.
4743 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4744 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4745 colors#8, cols#80, it#8, lines#24, pairs#64,
4746 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4747 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4748 civis=\233?25l, clear=\233H\2332J,
4749 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4750 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4751 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4752 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4753 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4754 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4755 flash=\233?5h$<100/>\233?5l, home=\233H,
4756 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4757 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4758 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4760 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4761 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4762 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4763 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4764 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4765 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4766 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4767 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4768 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4769 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4770 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4771 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4772 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4774 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4776 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4777 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4778 %{6}%=%t3%e%p1%d%;m,
4779 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4780 %{6}%=%t3%e%p1%d%;m,
4781 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4782 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4783 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4784 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4785 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4786 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
4787 vpa=\233%i%p1%dd, use=xterm+kbs,
4789 xterm-hp|xterm with hpterm function keys,
4790 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4791 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4792 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4793 knp=\ES, kpp=\ET, use=xterm-basic,
4795 xterm-sco|xterm with SCO function keys,
4796 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4797 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4798 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4799 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4800 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4801 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4802 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4803 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4804 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4805 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4806 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4807 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4810 # The xterm-new description has all of the features, but is not completely
4811 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4812 # sunKeyboard resource to true:
4813 # + maps the editing keypad
4814 # + interprets control-function-key as a second array of keys, so a
4815 # 12-fkey keyboard can support vt220's 20-fkeys.
4816 # + maps numeric keypad "+" to ",".
4817 # + uses DEC-style control sequences for the application keypad.
4819 xterm-vt220|xterm emulating vt220,
4820 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4821 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4822 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4823 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4824 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4825 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4826 use=xterm+app, use=xterm+edit, use=xterm-basic,
4829 xterm-vt52|xterm emulating dec vt52,
4830 cols#80, it#8, lines#24,
4831 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4832 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
4833 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4834 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4835 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
4838 xterm-noapp|xterm with cursor keys in normal mode,
4839 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4842 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4843 lines#24, use=xterm-old,
4845 # This is xterm for ncurses.
4846 xterm|xterm terminal emulator (X Window System),
4849 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4850 # setting the vt100Graphics resource to false.
4851 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4854 # These building-blocks allow access to the X titlebar and icon name as a
4855 # status line. There are a few problems in using them in entries:
4857 # a) tsl should have a parameter to denote the column on which to transfer to
4859 # b) the "0" code for xterm updates both icon-title and window title. Some
4860 # window managers such as twm (and possibly window managers descended from
4861 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4862 # don't want to mess with icon-name when using those window managers.
4864 # The extension "TS" is preferable, because it does not accept a parameter.
4865 # However, if you are using a non-extended terminfo, "TS" is not visible.
4866 xterm+sl|access X title line and icon name,
4868 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4869 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4871 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4873 # In contrast, this block can be used for a DEC vt320 and up. There are two
4876 # DECSASD (select active status display)
4877 # \E[0$} Main display
4878 # \E[1$} Status line
4880 # DECSSDT (select status line type)
4881 # \E[0$~ No status line
4882 # \E[1$~ Indicator status line
4883 # \E[2$~ Host-writable status line
4885 # The building block assumes that the terminal always shows something at the
4886 # status line (either the indicator, or status line). That is because if no
4887 # status line is used, then the terminal makes that line part of the user
4888 # window, changing its size without notice.
4890 # Because there is no "esl" (enable status line) capability, the "tsl"
4891 # capability ensures that the status line is host-writable. A DEC terminal
4892 # will clear the status line when changing from indicator to host-writable
4895 # Once on the status line, the row part of cursor addressing is ignored. Since
4896 # tsl expects a parameter (to specify the column), the shortest addressing that
4897 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4899 dec+sl|DEC VTxx status line,
4901 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4904 # The following xterm variants don't depend on your base version
4906 # xterm with bold instead of underline
4907 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4908 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4910 smso=\E[7m, smul=\E[1m, use=xterm-old,
4912 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4913 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4914 ich@, ich1@, use=xterm,
4915 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4916 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4917 rmcup@, smcup@, use=xterm,
4920 # The xterm mouse protocol is used by other terminal emulators.
4921 # In this section, two extended capabilities are used to illustrate the mouse
4922 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4923 # enabling/disabling other mouse protocols. The "xm" capability describes the
4924 # mouse response; currently there is no interpreter which would use this
4925 # information to make the mouse support completely data-driven.
4927 # Here is the "original" xterm mouse protocol.
4929 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4930 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4931 # sequence", referring to the fact that it does not correspond to a "real"
4932 # terminal. The mouse responses for the X10 protocol are sent only for
4934 xterm+x10mouse|X10 xterm mouse protocol,
4935 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4936 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4937 xterm-x10mouse|X10 xterm mouse,
4938 use=xterm+x10mouse, use=xterm,
4940 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4943 # The mouse responses for the X11 protocol covered button releases, as well as
4946 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4949 # The modifiers are not reflected in this description because as used in xterm
4950 # they are normally inaccessible because the translations resources assign
4951 # shift and control to other features. However, they are important because
4952 # they take up space in the first byte of the response. The other bits of this
4953 # byte are used to encode the button number for both presses and releases.
4954 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4955 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4956 # provide additional features, e.g., wheel mouse.
4958 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4959 # "t" or "T", which was activated by double-clicking. The "t" response was
4960 # used when the starting/ending positions were the same.
4962 # X11R3 (February 1988) added the highlight/tracking mode.
4964 # X11R4 (December 1989) added the control sequences document, listing the
4965 # control sequences for the X10/X11 protocols without descriptions. It also
4966 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4967 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4969 # X11R5 (November 1993) gave a description of the mouse protocol.
4971 # X11R6 (January 1995) moved the control sequences document out of the xterm
4972 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4973 # no new information.
4974 xterm+x11mouse|X11 xterm mouse protocol,
4975 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4976 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4977 xterm-x11mouse|X11 mouse,
4978 use=xterm+x11mouse, use=xterm,
4980 # Here is a suggested description of the xterm highlighting protocol.
4981 # A more complicated example could be constructed to account for the "t"
4983 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4984 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4985 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4987 xterm-x11hilite|X11 mouse with highlight,
4988 use=xterm+x11mouse, use=xterm,
4990 # The preceding were the sources from X Consortium. Other sources (or patches)
4991 # were available. Starting in mid-1995, XFree86 developers collected some of
4992 # those changes and began improvements, e.g., to support color. This was, by
4993 # the way, around the same time that rxvt developers began implementing color,
4994 # though dates (and attributions) are not well documented. I became interested
4995 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4996 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4998 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4999 # "any-event" mouse mode.
5000 xterm+sm+1002|xterm any-event mouse,
5001 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
5002 xterm-1002|xterm any-event mouse,
5003 use=xterm+sm+1002, use=xterm,
5005 xterm+sm+1003|testing xterm-mouse,
5006 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
5008 xterm-1003|testing xterm-mouse,
5009 use=xterm+sm+1003, use=xterm,
5011 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5014 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5015 # dropping support for the X11 mouse protocol's shift-modifier and using
5016 # available bits in the first byte of the response to encode buttons 4 and 5.
5017 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5018 # older configurations which might have used the obsolete modifiers.
5020 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5021 # where the coordinates in the mouse response would be encoded in UTF-8,
5022 # thereby extending the range of coordinates past 222=(255-33). This is the
5023 # "1005" mouse mode.
5024 xterm+sm+1005|xterm UTF-8 mouse,
5025 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5026 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5027 xterm-1005|xterm UTF-8 mouse,
5028 use=xterm+sm+1005, use=xterm,
5030 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5031 # SGR-style parameters.
5033 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5034 # (By the way, this is a problem with the X11 protocol). A more plausible
5035 # criticism is that the responses provided by the 1005 mode are not distinct
5036 # from the non-1005 responses.
5038 # As an alternative (and fixing the longstanding limitation of X11 mouse
5039 # protocol regarding button-releases), I provided this:
5040 xterm+sm+1006|xterm SGR-mouse,
5041 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5042 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
5043 xterm-1006|xterm SGR-mouse,
5044 use=xterm+sm+1006, use=xterm,
5047 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5048 # (kterm should not invoke DEC Graphics as the alternate character set
5049 # -- Kenji Rikitake)
5050 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5051 # -- MATSUMOTO Shoji)
5052 # kterm implements acsc via built-in table of X Drawable's
5053 kterm|kterm kanji terminal emulator (X window system),
5056 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5057 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
5058 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5059 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5061 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
5062 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
5063 kterm-color|kterm-co|kterm with ANSI colors,
5064 ncv@, use=kterm, use=ecma+color,
5068 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5069 # variant of xterm which is apparently no longer supported, but are interesting
5070 # because they illustrate SVr4 curses mouse controls - T.Dickey
5071 xtermm|xterm terminal emulator (monocrome),
5072 OTbs, am, km, mir, msgr, xenl,
5073 btns#3, cols#80, it#8, lines#24,
5074 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5075 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5076 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5077 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5078 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5079 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5080 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5081 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5082 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5083 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5084 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5085 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5086 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5087 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5088 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5089 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5090 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5091 %;m%?%p9%t\016%e\017%;,
5092 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5093 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5095 xtermc|xterm terminal emulator (color),
5096 colors#8, ncv#7, pairs#64,
5097 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5098 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5100 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5104 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5105 # Here's a termcap entry I've been using for xterm_color, which comes
5106 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5107 # color stuff, I also have a status line defined as the window manager
5108 # title bar. [I have translated it to terminfo -- ESR]
5109 xterm-pcolor|xterm with color used for highlights and status line,
5111 bold=\E[1;43m, rev=\E[7;34m,
5112 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5113 %t;7;31%;%?%p3%t;7;34%;m,
5114 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5116 # This describes the capabilities of color_xterm, an xterm variant from
5117 # before ECMA-64 color support was folded into the main-line xterm release.
5118 # This entry is straight from color_xterm's maintainer.
5119 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5120 # The README's with the distribution also say that it supports SGR 21, 24, 25
5121 # and 27, but they are not present in the terminfo or termcap.
5122 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5123 OTbs, am, km, mir, msgr, xenl, XT,
5124 cols#80, it#8, lines#65, ncv@,
5125 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5126 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5127 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5128 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5129 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5130 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5131 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5132 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5133 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5134 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5135 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5136 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5137 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5138 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5139 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5140 rmso=\E[27m, rmul=\E[24m,
5141 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5143 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5144 %;m%?%p9%t\016%e\017%;,
5145 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5146 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5147 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5149 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5150 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5151 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5152 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5153 # that each of those implements the home, end, delete keys differently.
5155 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5156 # colors; note that this is not compatible with the 5.2 version.
5157 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5158 # match XFree86's xterm.terminfo usage and prevent circular links
5159 xterm-color|nxterm|generic color xterm,
5161 op=\E[m, use=xterm-r6, use=klone+color,
5163 # This entry describes an xterm with Sun-style function keys enabled
5164 # via the X resource setting "xterm*sunFunctionKeys:true"
5165 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5166 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5167 # because we want it to be seen as <kcpy>.
5168 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5169 # with their Sun keyboard labels instead.
5170 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5171 xterm-sun|xterm with sunFunctionKeys true,
5172 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5173 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5174 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5175 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5176 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5177 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5178 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5179 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5180 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5181 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5182 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5183 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5185 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5186 cols#80, lines#24, use=xterm-sun,
5189 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
5190 gnome-rh62|Gnome terminal,
5192 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5195 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5197 # This implements a subset of vt102 with a random selection of features from
5198 # other terminals such as color and function-keys.
5200 # shift-f1 to shift-f10 are f11 to f20
5202 # NumLock changes the application keypad to approximate vt100 keypad, except
5203 # that there is no escape sequence matching comma (,).
5205 # Other defects observed:
5206 # vt100 LNM mode is not implemented.
5207 # vt100 80/132 column mode is not implemented.
5208 # vt100 DECALN is not implemented.
5209 # vt100 DECSCNM mode is not implemented, so flash does not work.
5210 # vt100 TBC (tab reset) is not implemented.
5211 # xterm alternate screen controls do not restore cursor position properly
5212 # it hangs in tack after running function-keys test.
5213 gnome-rh72|GNOME Terminal,
5215 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
5216 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
5217 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
5219 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
5221 # GNOME Terminal 2.0.1 (Redhat 8.0)
5223 # Documentation now claims it implements vt220 (which is demonstrably false).
5224 # However, it does implement ECH, which is a vt220 feature. And there are
5225 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
5226 # more of its bugs using vttest.
5228 # However, note that bce and msgr are broken in this release. Tabs (tbc and
5229 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
5231 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
5232 # operations. Shift-tab generates a distinct sequence so it can be argued
5233 # that it implements kcbt.
5234 gnome-rh80|GNOME Terminal,
5236 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
5237 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
5239 # GNOME Terminal 2.2.1 (Redhat 9.0)
5241 # bce and msgr are repaired.
5242 gnome-rh90|GNOME Terminal,
5244 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
5245 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
5246 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
5249 # GNOME Terminal 2.14.2 (Fedora Core 5)
5250 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
5251 gnome-fc5|GNOME Terminal,
5253 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
5255 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
5257 # GNOME Terminal 2.18.1 (2007 snapshot)
5259 # For any "recent" version of gnome-terminal, it is futile to attempt to
5260 # support modifiers on cursor- and keypad keys because the program usually
5261 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5262 # of the keys (which more/less correspond to the termcap values), and will
5263 # interpret those according to the $TERM value, but others not in the
5264 # terminfo according to some constantly changing set of hacker guidelines -TD
5265 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5266 use=xterm+pcc2, use=gnome-fc5,
5267 gnome-2007|GNOME Terminal snapshot 2.18.1,
5270 # GNOME Terminal 2.22.3 (2008 snapshot)
5272 # In vttest, it claims to be a vt220 with national replacement character-sets,
5273 # but aside from the identifier string, implements only a small fraction of
5274 # vt220's behavior, which will make it less usable on a VMS system (unclear
5275 # what the intent of the developer is, since the NRC feature exposed in vttest
5276 # by this change does not work).
5277 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5278 use=vte+pcfkeys, use=vte-2007,
5279 gnome-2008|GNOME Terminal snapshot 2.22.3,
5282 # GNOME Terminal 3.6.0 (2012)
5283 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5284 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5287 # Testing with tack shows that flash does not/has not worked -TD
5288 vte-2012|VTE 0.34.1,
5290 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
5291 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5292 %|%t;7%;m%?%p9%t\016%e\017%;,
5293 use=ecma+italics, use=vte-2008,
5294 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5295 # 61 differences from a correct entry for gnome terminal.
5296 gnome-2012|GNOME Terminal 3.6.0,
5299 # Before 2008, GNOME terminal could automatically use the contents of the
5300 # "xterm" terminfo to supply key information which is not built into the
5301 # program. With 2.22.3, this list was built into the program (which addressed
5302 # the inadvertent use of random terminfo data, though using a set of values
5303 # which did not correspond to any that xterm produced - still not solving the
5304 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
5306 # terminfo modifier code keys
5307 # kf13-kf24 shift 2 F1 to F12
5308 # kf25-kf36 control 5 F1 to F12
5309 # kf37-kf48 shift/control 6 F1 to F12
5310 # kf49-kf60 alt 3 F1 to F12
5311 # kf61-kf63 shift-alt 4 F1 to F3
5313 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5314 # no parameters. This appears to be rote copying based on xterm+pcc0.
5315 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5316 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5317 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5318 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5319 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5320 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5321 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5323 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5326 # deprecated - use "vte" for newer versions
5327 gnome|GNOME Terminal,
5330 # relevant changes were made in January 2014, and later.
5332 # Originally VTE was promoted as a library able to emulate any terminal by
5333 # reading its terminal description. In practice, that never got beyond the
5334 # ability to read definitions of special keys (function-, editing-, cursor).
5336 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
5337 # of a termcap file derived from xterm). That was incomplete because it did
5338 # not have any of the modifier-key information used for xterm's function-,
5339 # editing-, and cursor-keys. Having its own reader was unnecessary since
5340 # ncurses provides that information; used since xterm patch #225 in 2007.
5342 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
5343 # gnome #730137) dealt with attempts to recast that termcap reader as library
5344 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
5345 # abandoning that and finally constructing a table to match xterm's default
5346 # behavior, e.g., for "xterm+pcfkeys".
5347 vte-2014|VTE 0.35.1,
5349 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5350 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5351 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
5353 # As of January 2018, this was the most recent release,
5354 # e.g., with gnome-terminal 3.26.2
5355 vte-2017|VTE 0.50.2,
5356 use=ecma+strikeout, use=vte-2014,
5358 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
5359 # late in 2017 for changing the appearance of underlines, which was
5360 # incorporated into Debian and Fedora testing-packages in February and March
5361 # 2018, respectively.
5362 vte-2018|VTE 0.51.2,
5363 Smulx=\E[4\:%p1%dm, use=vte-2017,
5365 vte|VTE aka GNOME Terminal,
5368 vte-256color|VTE with xterm 256-colors,
5369 use=xterm+256color, use=vte,
5370 gnome-256color|GNOME Terminal with xterm 256-colors,
5373 # XFCE Terminal 0.2.5.4beta2
5375 # This is based on some of the same source code, e.g., the VTE library, as
5376 # gnome-terminal, but has fewer features, fails more screens in vttest.
5377 # Since most of the terminfo-related behavior is due to the VTE library,
5378 # the terminfo is the same as gnome-terminal.
5384 # https://github.com/thestinger/termite
5386 # A review requires install of Arch Linux since Fedora and Debian don't have
5387 # this program. It uses "vte3-ng" (a conflicting package), which is here:
5388 # https://github.com/thestinger/vte-ng
5389 # which (based on the default branch setting) seems to be a fork of vte
5390 # 0.48.2, and is noted as such in Arch:
5391 # https://www.archlinux.org/packages/community/x86_64/vte3-ng/
5392 # It won't be merged:
5393 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
5394 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
5395 # but perhaps made obsolete.
5397 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
5398 # was mostly cut/paste from xterm-256color, but since VTE does not actually
5399 # implement several of the features in that terminal description, this one is
5400 # trimmed to eliminate those. Also, since it is a slightly older version of
5401 # VTE, it lacks a few more features (again, trimmed).
5402 termite|VTE-based terminal,
5403 am, ccc, km, mir, msgr, npc, xenl,
5404 cols#80, it#8, lines#24, ncv@,
5405 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
5407 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5408 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5409 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5410 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5411 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5412 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5413 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5414 ht=^I, hts=\EH, ind=\n, indn=\E[%p1%dS, invis=\E[8m,
5415 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
5416 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
5417 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
5418 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5419 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
5420 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5422 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5423 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5424 vpa=\E[%i%p1%dd, use=ansi+idc, use=ansi+idl,
5425 use=ansi+enq, use=ecma+italics, use=xterm+256color,
5426 use=ecma+color, use=xterm+pcfkeys, use=xterm+sl-twm,
5429 # Multi-Gnome-Terminal 1.6.2
5431 # This does not use VTE, and does have different behavior (compare xfce and
5433 mgt|Multi GNOME Terminal,
5434 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5437 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5438 # or not is debatable).
5441 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5443 # Konsole 1.0.1 (2001/11/25)
5444 # (formerly known as kvt)
5446 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5447 # simplify this entry (and point out why konsole isn't xterm), we base this on
5448 # xterm-r6. The default keyboard appears to be 'linux'.
5451 # a) konsole implements several features from XFree86 xterm, though none of
5452 # that is documented - except of course in its source code - apparently
5453 # because its implementors are unaccustomed to reading documentation - as
5454 # evidenced by the sparse and poorly edited documentation distributed with
5455 # konsole. Some features such as the 1049 private mode are recognized but
5456 # incorrectly implemented as a duplicate of the 47 private mode.
5457 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5458 # sends PC-style escapes rather than vt100.
5459 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5460 # parse some control sequences. Also fails vttest Primary Device Attributes
5461 # by sending a bogus code (in the source it says it's supposed to be a
5462 # vt220, which is doubly incorrect because it does not implement vt220
5463 # control sequences except for a few special cases). Treat it as a
5464 # mildly-broken vt102.
5466 # Update for konsole 1.3.2:
5467 # The 1049 private mode works (but see the other xterm screens in vttest).
5468 # Primary Device Attributes now returns the code for a vt100 with advanced
5469 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5471 # Updated for konsole 1.6.4:
5472 # add konsole-solaris
5474 # Updated for konsole 1.6.6:
5475 # add control-key modifiers for function-keys, etc.
5477 # Updated for konsole 2.3 (October 2008):
5478 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5479 # different from xterm (and vt100's). They have the same behavior in
5480 # this detail, but it is unclear which copies the other.
5482 # Updated for konsole 2.12.4 (late 2013):
5485 # Updated for konsole 16.07 (mid 2016):
5486 # add dim, invis, strikeout
5487 # (also overline, which is too rarely used to provide as an extension)
5489 # Updated for konsole 17.12.0 (late 2017):
5490 konsole-base|KDE console window,
5493 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m,
5494 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5495 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, invis=\E[8m, kbs=^?,
5496 kdch1=\E[3~, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@,
5497 kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@,
5498 kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT,
5499 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5500 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5501 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5502 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5503 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
5504 use=ecma+strikeout, use=ecma+italics, use=ecma+color,
5507 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
5508 # "vt100" key-table files along with a compiled-in default key-table.
5510 # The main difference between the two keytabs was that the developer equated
5511 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
5512 # that. For the same reason, the home/end keys differ. A VT100 had none of
5513 # that. The otherwise identical keytabs have definitions to model the VT52
5514 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
5516 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
5517 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
5518 # dropped from the install in June 2008.
5520 # The default keytab added in January 2000 was originally titled "X11 R6",
5521 # and likewise retitled to "XFree 4".
5523 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
5524 # and changing backspace to ^H, removing that keytab's attempt to model the
5525 # VT100 keypad and VT52 (KDE #20459).
5527 # The developers made changes to the default and linux keytabs. Comparing
5528 # the original and 2018 versions using diffstat:
5529 # default: 119 added, 147 deleted, 28 unchanged
5530 # linux: 47 added, 28 deleted, 104 unchanged
5532 # Most of the change for the default keytab was to make konsole act more like
5533 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
5534 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
5535 # made an external file (like "linux" and "solaris"), and some further
5536 # refinement made. But there are still flaws in the scheme.
5538 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
5539 # Shift into a placeholder in the table entries. That works well if all of the
5540 # modified keys are modified in the same way. But xterm does not do that. The
5541 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
5542 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
5543 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
5544 # kf14: '\E[1;2Q', '\EO2Q'.
5546 # In effect, a quarter of konsole's function-keys are different from xterm.
5548 # It is not a simple blunder:
5549 # a) xterm patch #121 (November 1999), providing the first version of the
5550 # PC-style modifiers would send \EO2Q
5551 # b) xterm patch #216 (July 2006) amended this and other details, provided
5552 # better documentation for the modifiers and made the behavior configurable,
5553 # e.g., using the modifyFunctionKeys resource. The reason why it sends
5554 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
5555 # changelog points this out as "avoid sending SS3 with parameters".
5556 # c) That came after AnyMod was introduced, but still early enough that one
5557 # might expect konsole's developers to followup. Twelve years later that
5558 # has yet to happen.
5560 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
5562 konsole-linux|KDE console window with linux keyboard,
5563 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5564 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5565 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5566 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5567 konsole-solaris|KDE console window with Solaris keyboard,
5568 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5570 # Obsolete: x11r5.keymap
5571 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
5572 # terminfo at the time rather than testing the code.
5573 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5574 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5576 # The value for kbs (see konsole-vt100) reflects local customization rather
5577 # than the settings used for XFree86 xterm.
5578 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5579 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5582 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5583 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
5586 # Obsolete: vt100.keymap
5587 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5588 # it is still useful for deriving the other entries, since the developer
5589 # provided function-keys based on xterm.
5590 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5591 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5592 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5593 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5594 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5595 khome=\E[H, use=konsole-base,
5597 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
5598 # September 2008 and removed in June 2016. The developer who removed it stated
5599 # that it was never installed.
5600 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5601 kbs=^H, kdch1=^?, use=konsole-vt100,
5603 # make a default entry for konsole
5604 konsole|KDE console window,
5607 # These were written for ncurses:
5608 konsole-16color|klone of xterm-16color,
5609 ncv#32, use=ibm+16color, use=konsole,
5610 konsole-256color|KDE console window with xterm 256-colors,
5611 use=xterm+256setaf, use=konsole,
5614 # http://mlterm.sourceforge.net/
5616 mlterm|multi lingual terminal emulator,
5619 # Tested mlterm 3.2.2:
5620 # mlterm 3.x has made changes, but they are not reflected in the included
5621 # mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD
5622 # 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8
5623 mlterm3|multi lingual terminal emulator,
5624 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5625 use=ecma+italics, use=xterm+app, use=xterm+pcf0,
5626 use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse,
5629 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5631 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5634 # The function keys are numbered based on shift/control/alt modifiers, except
5635 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5636 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5637 # how it is configured.
5639 # kf1 to kf12 \E[11~ to \E[24~
5640 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5641 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5642 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5643 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5644 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5645 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5646 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5648 mlterm2|multi lingual terminal emulator,
5649 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5650 colors#8, cols#80, it#8, lines#24, pairs#64,
5651 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5652 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5653 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5654 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5655 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5656 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5657 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5658 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5659 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5660 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5661 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5662 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5663 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5664 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5665 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5666 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT,
5667 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
5668 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5669 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5670 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5671 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5673 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5674 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5675 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5676 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5678 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5679 # looks in its termcap to decide which string to send. If it used terminfo
5680 # (when available), it could use the extended names introduced for xterm.
5681 mlterm+pcfkeys|fragment for PC-style fkeys,
5682 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5683 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5684 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5685 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5686 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5687 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5688 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5689 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5690 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5692 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5693 use=xterm+256color, use=mlterm,
5696 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5697 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5700 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5701 # but some applications don't work with that.
5702 # It also has an AIX extension
5706 # but the latter does not work correctly.
5708 # The distributed terminfo says it implements hpa and vpa, but they are not
5709 # implemented correctly, using relative rather than absolute positioning.
5711 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5712 # Since rxvt is not really compatible with xterm, it should be configured as
5713 # "rxvt" or "rxvt-color".
5715 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5716 # remove km as per tack test -TD
5717 rxvt-basic|rxvt terminal base (X Window System),
5718 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5719 cols#80, it#8, lines#24,
5720 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5721 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5722 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5723 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5724 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5725 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5726 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5727 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5728 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5729 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5730 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5731 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5732 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5734 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5735 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5737 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5738 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5740 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5741 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5742 use=rxvt+pcfkeys, use=vt220+keypad,
5743 # Key Codes from rxvt reference:
5745 # Note: Shift + F1-F10 generates F11-F20
5747 # For the keypad, use Shift to temporarily override Application-Keypad
5748 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5749 # is off, escape sequences toggle Application-Keypad setting.
5750 # Also note that values of Home, End, Delete may have been compiled
5751 # differently on your system.
5753 # Normal Shift Control Ctrl+Shift
5754 # Tab ^I ESC [ Z ^I ESC [ Z
5755 # BackSpace ^H ^? ^? ^?
5756 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5757 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5758 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5759 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5760 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5761 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5762 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5763 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5764 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5765 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5766 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5767 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5768 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5769 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5770 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5771 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5772 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5773 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5774 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5775 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5776 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5777 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5778 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5779 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5780 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5781 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5782 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5783 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5784 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5787 # Up ESC [ A ESC [ a ESC O a ESC O A
5788 # Down ESC [ B ESC [ b ESC O b ESC O B
5789 # Right ESC [ C ESC [ c ESC O c ESC O C
5790 # Left ESC [ D ESC [ d ESC O d ESC O D
5791 # KP_Enter ^M ESC O M
5792 # KP_F1 ESC O P ESC O P
5793 # KP_F2 ESC O Q ESC O Q
5794 # KP_F3 ESC O R ESC O R
5795 # KP_F4 ESC O S ESC O S
5796 # XK_KP_Multiply * ESC O j
5797 # XK_KP_Add + ESC O k
5798 # XK_KP_Separator , ESC O l
5799 # XK_KP_Subtract - ESC O m
5800 # XK_KP_Decimal . ESC O n
5801 # XK_KP_Divide / ESC O o
5813 # The source-code for rxvt actually defines mappings for F21-F35, using
5814 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5815 # are rare, so this entry uses the shift- and control-modifiers as in
5816 # xterm+pcfkeys to define keys past F12.
5818 # kIC is normally not used, since rxvt performs a paste for that (shifted
5819 # insert), unless private mode 35 is set.
5821 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5822 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5823 rxvt+pcfkeys|fragment for PC-style fkeys,
5824 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5825 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5826 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5827 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5828 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5829 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5830 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5831 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5832 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5833 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5834 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5835 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5836 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5837 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5838 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5839 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5840 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5841 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5842 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5843 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5845 # rxvt was originally "xvt", first announced in April 1993:
5846 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
5847 #------------------------------------------------------------------------------
5848 # Article: 567 of comp.os.linux.announce
5849 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
5850 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
5851 # From: nation@rocket.sanders.com (Robert Nation)
5852 # Newsgroups: comp.os.linux.announce
5853 # Subject: xvt upload
5854 # Date: 16 Apr 1993 18:13:07 GMT
5855 # Organization: Cornell Theory Center
5857 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
5858 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
5859 # NNTP-Posting-Host: theory.tc.cornell.edu
5860 # Keywords: xvt, xterm, Xwindows
5861 # Originator: mdw@theory.TC.Cornell.EDU
5863 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
5864 # rxvt.README on sunsite.unc.edu.
5866 # Xvt is an xterm replacement which uses a little less memory, and is
5867 # suitable for use on machines with small memories. Tek4010 support
5870 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
5871 # to make it a little more compact, and to add and remove certain features.
5875 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
5876 #------------------------------------------------------------------------------
5878 # Though its change-log does not mention this, John Davis has stated that he
5879 # was the author of the changes to use the bce ("new color model") which was
5880 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5881 # dates, nor give developer's names. Initial color support was added for rxvt
5882 # "2.0", which was sometime in 1994.
5884 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5885 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5887 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5888 # was from one of my bug-reports -TD
5890 # While the color model both for xterm and rxvt was based on Linux console,
5891 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5892 # behavior: inserting/deleting characters does not fill the newly empty cell
5893 # with the default background color.
5894 rxvt|rxvt terminal emulator (X Window System),
5896 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5897 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5898 rxvt-color|rxvt terminal emulator (X Window System),
5900 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5901 use=xterm+256color, use=rxvt,
5902 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5903 use=xterm+88color, use=rxvt,
5904 rxvt-xpm|rxvt terminal emulator (X Window System),
5906 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5907 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5908 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5909 \302x\263y\363z\362{\343|\330}\234~\376,
5911 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5912 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5913 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5914 \302x\263y\363z\362{\343|\330~\376,
5917 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5918 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5919 rxvt-16color|rxvt with 16 colors like aixterm,
5920 ncv#32, use=ibm+16color, use=rxvt,
5925 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5926 # makes its function-keys different from other flavors of rxvt -TD
5928 # Testing with tack:
5929 # + made custom description (below) to work, though it sets TERM=xterm.
5931 # Testing with vttest:
5932 # + While "based on" rxvt, some of the basic functionality is broken. The
5933 # window collapses to a single line when running several of the screens
5934 # in vttest, e.g., the tests for cursor movement, screen features,
5935 # double-sized characters.
5936 # + The vt52 test works properly, but this is an exception. Due to the
5937 # other bug(s) most of vttest is untestable.
5938 # + the color test using ECH shows a gap in the bce model, like rxvt.
5940 # Testing with xterm "vttest" scripts:
5941 # + resize.pl does not work because mrxvt does implement CSI 18 t
5942 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5943 # + none of the "dynamic colors" (OSC colors) scripts work.
5944 mrxvt|multitabbed rxvt,
5946 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5947 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5948 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5949 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5950 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5951 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5954 mrxvt-256color|multitabbed rxvt with 256 colors,
5955 use=xterm+256color, use=mrxvt,
5958 # From: Michael Jennings <mej@valinux.com>
5962 # removed kf0 which conflicts with kf10 -TD
5963 # remove cvvis which conflicts with cnorm -TD
5964 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5965 # but does otherwise follow the rxvt+pcfkeys model -TD
5966 # remove nonworking flash -TD
5967 # remove km as per tack test -TD
5968 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5969 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5970 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5971 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5972 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5973 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5974 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5975 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5976 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5977 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5978 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5979 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5980 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5981 is1=\E[?47l\E>\E[?1l,
5982 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5983 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5984 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5985 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5986 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5987 rmso=\E[27m, rmul=\E[24m,
5988 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5989 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5992 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5993 %;m%?%p9%t\016%e\017%;,
5994 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5995 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5996 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5999 Eterm-256color|Eterm with xterm 256-colors,
6000 use=xterm+256color, use=Eterm,
6002 Eterm-88color|Eterm with 88 colors,
6003 use=xterm+88color, use=Eterm,
6006 # Based on rxvt 2.4.8, it has a few differences in key bindings
6007 aterm|AfterStep terminal,
6009 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
6013 # This is not based on xterm's source...
6014 # vttest shows several problems with keyboard, cursor-movements.
6015 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6016 xiterm|internationalized terminal emulator for X,
6018 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
6022 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6023 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6024 # chars look like --esr)
6025 hpterm|X-hpterm|hp X11 terminal emulator,
6026 am, da, db, mir, xhp, xon,
6027 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6028 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6029 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6030 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6031 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6032 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6033 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6034 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6035 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6036 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
6037 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6038 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6039 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6040 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6041 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6043 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6044 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6045 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6046 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6048 # HPUX 11 provides a color version.
6049 hpterm-color|HP X11 terminal emulator with color,
6053 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6054 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6057 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6058 # It corresponds to emu's internal emulation:
6060 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6061 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6062 # fixes: add civis, cnorm, sgr -TD
6063 emu|emu native mode,
6064 am, bce, mir, msgr, xon,
6065 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6066 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6067 \224t\225u\226v\227w\230x\231~\244,
6068 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6069 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6070 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6071 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6072 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6073 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6074 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6075 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6076 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6077 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6078 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6079 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6080 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6081 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6082 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
6083 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
6085 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
6087 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
6089 # vt220 Terminfo entry for the Emu emulation, corresponds to
6091 # with NumLock set (to make the keypad transmit kf0-kf9).
6092 # fixes: add am, xenl, corrected sgr0 -TD
6093 emu-220|Emu-220 (vt200-7bit mode),
6095 cols#80, it#8, lines#24, vt#200,
6096 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
6097 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
6098 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
6099 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
6100 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
6101 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
6102 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
6103 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
6104 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
6105 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
6106 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6107 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
6108 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
6109 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
6110 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
6111 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
6112 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
6113 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
6114 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
6115 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6116 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
6117 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
6118 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6119 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
6120 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
6123 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
6124 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
6125 # indicate that it emulates more than one terminal, but incompletely.
6127 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
6128 # It is based on vt102's entry, with some subtle differences, but also
6130 # supports ANSI colors (except for 'op' string)
6131 # apparently implements alternate screen like xterm
6132 # does not use padding, of course.
6133 mvterm|vv100|SwitchTerm aka mvTERM,
6134 am, eslok, hs, km, mir, msgr, xenl, xon,
6135 colors#8, cols#80, it#8, lines#24, pairs#64,
6136 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6137 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6138 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6139 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6140 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6141 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6142 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
6143 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6144 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
6145 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
6146 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
6147 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6148 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
6150 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
6151 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6152 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6153 %;m%?%p9%t\016%e\017%;,
6154 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
6155 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6156 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
6160 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
6162 # "mterm -type ansi" sets $TERM to "ansi"
6163 mterm-ansi|ANSI emulation,
6166 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6167 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6168 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
6169 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6170 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6171 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
6172 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
6173 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
6174 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
6175 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
6177 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6178 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6179 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
6180 smul=\E[4m, vpa=\E[%i%p1%dd,
6181 # mterm normally sets $TERM to "mterm"
6182 mterm|mouse-sun|Der Mouse term,
6185 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
6186 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
6187 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
6188 rmir=^O, rmso=^T, smir=^Q, smso=^V,
6189 # "mterm -type decansi" sets $TERM to "decansi"
6191 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
6192 decansi|ANSI emulation with DEC compatibility hacks,
6193 am, mir, msgr, xenl,
6194 colors#8, it#8, pairs#64,
6195 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6196 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6197 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
6198 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
6199 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6200 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6201 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6202 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
6203 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
6204 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
6205 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
6206 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
6207 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6208 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6209 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6210 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
6211 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
6212 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
6213 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
6214 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
6215 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6216 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6217 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6218 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6219 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
6220 u7=\E[6n, vpa=\E[%i%p1%dd,
6223 # http://vwm.sourceforge.net/
6225 # VWM 2.0.2 (2009-05-01)
6226 # vwmterm is a terminal emulator written for the VWM console window manager.
6227 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
6229 am, bce, ccc, mir, msgr, npc, xenl, xon,
6231 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6232 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6233 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
6234 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6235 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6236 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
6237 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
6238 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6239 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
6240 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6241 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6242 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
6243 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
6244 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6245 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
6246 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6247 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
6248 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
6252 # MGR is a Bell Labs window system lighter-weight than X.
6253 # These entries describe MGR's xterm-equivalent.
6254 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
6257 mgr|Bellcore MGR (non X) window system terminal emulation,
6259 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
6260 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
6261 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
6262 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
6263 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
6264 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
6265 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6266 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
6267 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
6269 mgr-sun|Mgr window with Sun keyboard,
6270 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
6271 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
6272 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
6273 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
6274 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
6275 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
6276 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
6277 mgr-linux|Mgr window with Linux keyboard,
6278 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
6279 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
6280 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6281 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6282 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
6287 st|stterm| simpleterm,
6291 # dim is intermittent, sometimes works, sometimes does not
6292 # italics may show up with yellow color
6293 # has control cursor-keys, alt cursor-keys, still no combinations
6294 # has control pageup/down
6295 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
6296 # Se and Ss are implemented in the source-code, but the terminfo
6297 # provided with the source is incorrect, since Se/Ss are mis-coded
6298 # as booleans rather than strings.
6299 st-0.7|simpleterm 0.7,
6302 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
6303 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
6304 kcbt@, kent@, oc=\E]104\007,
6305 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6306 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6307 Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
6308 kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
6309 kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
6310 kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
6311 use=ecma+strikeout, use=st-0.6,
6315 # This version uses a table which supports a single modifier (a subset of
6316 # xterm's keys, using the same scheme). Because it supports only a single
6317 # modifier in this table, function keys f36-f48 are normally unavailable
6318 # because they are assigned to modifier-4.
6320 # The program assigns TERM to match the program name (the upstream source says
6321 # "st", but Debian renames it to "stterm").
6323 # The source includes two entries which are not useful here:
6324 # st-meta| simpleterm with meta key,
6325 # st-meta-256color| simpleterm with meta key and 256 colors,
6326 # because st's notion of "meta" does not correspond to the terminfo definition.
6327 # Rather, it acts like xterm - when the meta feature is disabled.
6330 # Added eo, removed ul -TD
6333 # implements control-modifier, but not control-shift for special keys
6334 # implements alt-modifier, but not alt-shift for special keys
6337 # http://git.suckless.org/st/log/st.info
6338 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
6339 # still has no function keys past kf36 (no combinations of modifiers)
6340 # no application keypad mode, e.g, kent.
6341 st-0.6|simpleterm 0.6,
6342 am, bce, hs, mir, msgr, npc, xenl, XT,
6343 colors#8, cols#80, it#8, lines#24, pairs#64,
6344 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
6346 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6347 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
6348 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6349 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6350 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6351 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6352 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6353 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
6354 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6355 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
6356 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
6357 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
6358 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
6359 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
6360 kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6361 kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F,
6362 kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
6363 kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
6364 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
6365 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
6366 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
6367 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
6368 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
6369 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
6370 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
6371 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
6372 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
6373 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
6374 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
6375 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
6376 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
6377 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
6378 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
6379 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6380 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
6381 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
6382 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6383 rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
6384 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
6385 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6386 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6388 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6390 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6391 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
6392 sgr0=\E[0m, smacs=\E(0, smcup=\E[?1049h, smir=\E[4h,
6393 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6394 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
6395 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=xterm+sl,
6400 # Note: the original terminfo description uses leading blank to persuade
6401 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
6404 # Reading the code shows it should work for aixterm 16-colors
6405 # - added st-16color
6408 # - set eo (erase-overstrike)
6410 # - tbc doesn't work
6412 # - cbt doesn't work
6413 # - shifted cursor-keys send sequences like rxvt
6414 # - sgr referred to unimplemented "invis" mode.
6415 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
6416 simpleterm|old-st| simpleterm 0.1.1,
6417 am, eo, mir, msgr, ul, xenl,
6418 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6419 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6420 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6421 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6422 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6423 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6424 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6425 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6426 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?,
6427 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6428 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6429 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6430 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6431 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
6432 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
6433 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6434 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6436 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
6437 st-16color|stterm-16color|simpleterm with 16-colors,
6438 use=ibm+16color, use=st,
6439 # 256 colors "works", but when running xterm's test-scripts, some garbage is
6440 # shown in the titlebar.
6442 # terminal wants to use TERM=stterm-256color, but that is longer than 14
6443 # characters, making the choice nonportable.
6444 st-256color|stterm-256color|simpleterm with 256 colors,
6446 initc@, oc@, use=xterm+256color, use=st,
6449 # https://github.com/software-jessies-org/jessies/wiki/Terminator
6451 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
6452 # Debian/current -TD (2011/8/20)
6454 # There are some packaging problems:
6455 # a) using Java, the program starts off using 50Mb, and climbs from there,
6456 # up to 114Mb after testing (no scrollback).
6457 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
6458 # (two copies, just in case the host happens to be Mac OS X).
6459 # I deleted this after testing with tack.
6461 # Issues/features found with tack:
6462 # a) tbc does not work (implying that hts also is broken).
6463 # Comparing with the tabs utility shows a problem with the last tabstop on
6465 # b) has xterm-style shifted function-key strings
6466 # meta also is used, but control is ignored.
6467 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6469 # d) some combinations of shift/control send xterm-style sequences for
6470 # insert/delete/home/end.
6471 # e) numeric keypad sends only numbers (compare with vttest).
6472 # f) meta mode (km) is not implemented.
6474 # Issues found with ncurses test-program:
6475 # a) bce is inconsistently implemented
6476 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6478 # Checked with vttest, found low degree of compatibility there.
6480 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6484 # b) corrected sgr0 to reset alternate character set
6485 # c) modified smacs/rmacs to use SCS rather than SI/SO
6488 terminator|Terminator no line wrap,
6489 eo, mir, msgr, xenl, xon,
6490 colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x10000,
6491 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6492 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6493 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6494 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6495 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6496 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6497 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6498 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
6499 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
6500 is1=\E[?47l\E=\E[?1l,
6501 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6502 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6503 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6504 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6505 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6506 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6507 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6508 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6509 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6510 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6511 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6512 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6513 setaf=\E[38;5;%p1%dm,
6514 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6516 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6517 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6521 # https://www.enlightenment.org/about-terminology
6523 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6524 # emulator, nor is it compatible with xterm, but it uses a few features from
6528 # cursor does not fill on focus
6529 # there are pervasive problems with clearing/erasing parts of the screen
6530 # resizing the window causes it to stop listening to the keyboard
6532 # doesn't understand vt100 CPR needed for resize
6537 # uses bce model for colors, but (see below) fails the vttest screens
6538 # has partial support for 256color feature.
6539 # tack function-keys (a subset of xterm+pcf0), and
6540 # tack cursor-keys (a subset of xterm+pce2):
6541 # ctrl+shift (ignored)
6543 # shift-alt modifier -> shift (2)
6547 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6548 # ctrl + khome/kend works - none of the other modifiers do
6550 # spits lots of messages from termptyesc.c especially in vttest.
6551 # no 132-column mode
6552 # fails menu 1, 2 (definitely not vt100-compatible)
6553 # primary (claims vt420 with several options, apparently none work) and
6554 # secondary report says (perhaps... vt420): \E[>41;285;0c
6555 # CHA, HPR, VPA, CNL, CPL work
6556 # BCE with ED/EL - fail
6557 # BCE with ECH/indexing - fail
6559 # unlike teken, background light/dark works
6561 # X10 and Normal mouse work
6562 # Any-event mouse works
6563 # Mouse button-event works
6565 # This description uses xterm+pcf0, which is misleading because the program
6566 # does not handle combinations of modifiers - but listing them all would
6567 # involve more effort than its developers spent -TD
6568 terminology-0.6.1|EFL-based terminal emulator,
6570 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6571 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6572 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6573 kind=\E[1;2B, kri=\E[1;2A,
6574 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6575 %;m%?%p9%t\016%e\017%;$<2>,
6576 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6577 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6578 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6579 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6580 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6581 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6582 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6583 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6586 # Tested terminology 1.0.0
6589 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
6590 # and control+alt were added like xterm+pcc2
6591 # Editing keys have some features from xterm+pce2
6592 # Changed from xterm+pcf0 to xterm+pcf2
6597 # Aside from the partial fixes for function/cursor/editing keys, no improvement
6598 # in other tests versus 0.6.1
6599 terminology-1.0.0|EFL-based terminal emulator,
6600 civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m,
6601 flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH,
6603 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
6604 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
6605 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
6606 use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2,
6607 use=xterm+pcc2, use=terminology-0.6.1,
6609 terminology|EFL-based terminal emulator,
6610 use=terminology-1.0.0,
6612 ######## OPENGL CLIENTS
6615 # https://github.com/jwilm/alacritty
6616 # Version 0.2.1 (2018/10/03)
6617 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
6618 # terminal programs) is not designed to run with a remote server.
6620 # Packaged in Arch Linux -
6622 # initial screensize 24x80
6623 # does not switch between 80/132 columns
6624 # passes wrapping test
6625 # identifies as a vt100
6628 # fails ECH, leaving text on right margin
6632 # does not implement any of the DECRQM/DECRPM controls
6633 # does not implement any of the DECRQSS controls
6640 # has normal and highlight mouse
6641 # has any-event and button-event mouse
6642 # cursor-position wrong after alternate-screen
6643 # none of the dtterm controls work
6645 # bell and flash do not work (perhaps Parallels problem)
6646 # italics works; crossed-out does not
6647 # function-keys work up to kf36; window manager interferes with remainder
6649 # The program sources include "alacritty" and "alacritty-direct", which are
6650 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for
6651 # subparameter delimiter). Refactored here to use ncurses building blocks -TD
6652 alacritty|alacritty terminal emulator,
6653 rs1=\Ec\E]104\007, use=xterm+256color,
6654 use=alacritty+common,
6656 alacritty-direct|alacritty with direct color indexing,
6657 use=xterm+indirect, use=alacritty+common,
6659 # removed ech, since it fails vttest -TD
6660 # removed ecma+strikeout, not implemented -TD
6661 alacritty+common|base fragment for alacritty,
6663 ech@, indn=\E[%p1%dS, kb2=\EOE, kbs=^H, kcbt=\E[Z, kent=\EOM,
6664 rin=\E[%p1%dT, Se=\E[0 q, use=xterm-basic, use=xterm+app,
6665 use=ansi+rep, use=xterm+sm+1006, use=xterm+tmux,
6666 use=ecma+italics, use=xterm+pce2, use=xterm+pcc2,
6670 # https://github.com/kovidgoyal/kitty
6672 # Project started in 2016/10 (see alacritty), but is a Python script rather
6673 # than Rust, using OpenGL. The same caveats regarding remote connections
6674 # apply. This is not an X terminal, though (like alacritty), it copies
6675 # features from xterm.
6677 # Regarding the name "kitty", that is a pun, reflected in the description.
6679 # http://www.9bis.net/kitty/
6680 # https://github.com/kovidgoyal/kitty/issues/9
6681 # https://github.com/kovidgoyal/kitty/issues/1025
6683 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
6684 # https://github.com/kovidgoyal/kitty/issues/879
6687 # initial screensize 71x22
6688 # does not respond to "resize -s"
6689 # resizing with window manager gives no clues
6691 # does not switch between 80/132 columns
6692 # fails wrapping test, copying vte/rxvt
6693 # no reverse-background, no blink
6694 # claims to be vt200:
6696 # secondary \E[>1;4000;12c
6698 # no GR in the locking-shifts screen
6699 # no NRCS or ISO-2022, anyway
6702 # has DECTCEM, ECH, but no SRM and DECSCA
6703 # has operating condition report, none of the others
6706 # DECRQSS ok for DECSTBM, SGR, none of the others
6709 # DECXCPR device status works, none of the others
6710 # no left/right margins
6711 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
6712 # inside of DECCARA is uncolored
6713 # line-drawing with DECCARA does not work
6714 # aside from left/right margins, editing sequences look ok
6717 # fails ECH test for bce
6719 # fails REP, SL, SL, but other cursor-movement ok
6721 # does not recognize original alternate-screen
6722 # cursor-position wrong after alternate-screen
6723 # has normal mouse, any-event, any-button, but
6725 # no mouse-highlight tracking
6727 # dtterm - only supports report-size chars/pixels
6729 # flash doesn't work
6730 # bce should be set (but see vttest)
6731 #* developer's terminfo stopped at kf25, but the program continues,
6732 # copying xterm for the rest of the control+fkey sequence
6733 # (but only one modifier is supported, like iTerm2).
6734 #* it omitted shifted pageup/down
6735 #* control+editing keys work
6736 # In contrast to function-keys, some additional modifier combinations
6737 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While
6738 # the implementation is incomplete, the building-blocks are consistent
6739 # with what has been implemented -TD
6740 #* ka1, ka3, kc1, kc3 were bogus (removed)
6741 #* meta sends escape (removed kmm) -TD
6742 #* cvvis does not make cursor "more visible" -TD
6744 use=xterm+256color, use=kitty+common,
6745 kitty-direct|KovId's TTY using direct colors,
6746 oc=\E]104\007, use=xterm+direct2, use=kitty+common,
6747 kitty+common|KovId's TTY common properties,
6748 am, mc5i, mir, msgr, npc, xenl,
6749 cols#80, it#8, lines#24,
6750 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6752 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6753 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
6754 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6755 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6756 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6757 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6758 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6759 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
6760 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6761 ind=\n, indn=\E[%p1%dS, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
6762 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF,
6763 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6764 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
6765 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
6766 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
6767 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
6768 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
6769 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
6770 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
6771 kf36=\E[24;5~, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
6772 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH,
6773 kich1=\E[2~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
6774 kpp=\E[5~, kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m,
6775 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
6776 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7,
6777 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6779 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
6780 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6781 vpa=\E[%i%p1%dd, use=xterm+sl-twm, use=xterm+pce2,
6782 use=xterm+pcc2, use=ecma+italics, use=xterm+alt1049,
6784 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6787 # Columbus UNIX virtual terminal. This terminal also appears in
6788 # UNIX 4.0 and successors as line discipline 1 (?), but is
6789 # undocumented and does not really work quite right.
6790 cbunix|cb unix virtual terminal,
6792 cols#80, lines#24, lm#0,
6793 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
6794 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6795 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
6796 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6797 smso=\Ea^D, smul=\Ea^A,
6798 # (vremote: removed obsolete ":nl@:" -- esr)
6799 vremote|virtual remote terminal,
6801 cols#79, use=cbunix,
6803 pty|4bsd pseudo teletype,
6804 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6805 smso=\Ea$, smul=\Ea!, use=cbunix,
6809 # https://www.emacswiki.org/emacs/AnsiTerm
6810 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6812 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6813 eterm|gnu emacs term.el terminal emulation,
6816 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6817 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6818 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6819 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6820 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6821 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6822 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
6823 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6824 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6827 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6828 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6829 am, mir, msgr, xenl,
6830 colors#8, cols#80, lines#24, pairs#64,
6831 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6832 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6833 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6834 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6835 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6836 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6837 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
6838 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6839 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6840 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6841 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6842 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6843 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6845 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6846 u6=\E[%i%d;%dR, u7=\E[6n,
6848 # shell.el can "do" color, though not nearly as well.
6851 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6854 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6855 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6856 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6858 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6859 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6860 # italics but does not lose the color information -TD 2017/01/28.
6861 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6863 colors#8, it#8, ncv#13, pairs#64,
6864 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
6865 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6866 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
6870 # Entries for use by the `screen' program by Juergen Weigert,
6871 # Michael Schroeder, Oliver Laumann. The screen and
6872 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6873 # come from University of Wisconsin and may be older.
6874 # (screen: added <cnorm> on ANSI model -- esr)
6876 # 'screen' defines extensions to termcap. Some are used in its terminal
6878 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6879 # AX (bool) Does understand ANSI set default fg/bg color
6880 # (\E[39m / \E[49m).
6881 # S0 (str) Switch charset 'G0' to the specified charset.
6882 # E0 (str) Switch charset 'G0' back to standard charset.
6884 # Initially tested with screen 3.09.08
6886 # According to its manual page
6888 # Screen is a full-screen window manager that multiplexes a physical
6889 # terminal between several processes (typically interactive shells). Each
6890 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6891 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6892 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6893 # multiple character sets).
6895 # However, there is a design error in its support for video highlights. The
6896 # program uses a table (rendlist) which equates the SGR codes to terminal
6897 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6898 # is modified only by the presence or absence of the corresponding capabilities.
6899 # Not by their values.
6901 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6902 # correspond to the rendlist table.
6904 # The table gives this information:
6916 # 22 reset bold, standout and dim
6918 # 24 reset underline
6923 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6924 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6925 # Without some redesign of screen, it is not possible to extend the set of
6926 # capabilities. Substitution would be possible, e.g., sending italics in
6927 # place of underline.
6929 # Because screen uses hard-coded parsing, it does not check if two capabilities
6930 # use the same value. For example, changing standout to be the same as any of
6931 # the other capabilities will confuse screen. Curses applications which use
6932 # sgr are not impacted (because that usually resets all capabilities before
6933 # setting any), but termcap applications do not use sgr -TD
6934 screen|VT 100/ANSI X3.64 virtual terminal,
6935 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6936 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6937 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6940 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
6941 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6942 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6943 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6944 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6945 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6946 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
6947 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6948 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
6949 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6950 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6951 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6952 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6953 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6954 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6955 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6956 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6957 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6958 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6959 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6960 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6961 vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c, use=ecma+color,
6962 # The bce and status-line entries are from screen 3.9.13 (and require some
6963 # changes to .screenrc).
6964 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6967 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6968 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6970 # ======================================================================
6971 # Entries for GNU Screen with 16 colors.
6972 # Those variations permit to benefit from 16 colors palette, and from
6973 # bold font and blink attribute separated from bright colors. But they
6974 # are less portable than the generic "screen" 8 color entries: Their
6975 # usage makes real sense only if the terminals you attach and reattach
6976 # do all support 16 color palette.
6978 screen-16color|GNU Screen with 16 colors,
6979 use=ibm+16color, use=screen,
6981 screen-16color-s|GNU Screen with 16 colors and status line,
6982 use=ibm+16color, use=screen-s,
6984 screen-16color-bce|GNU Screen with 16 colors and BCE,
6985 use=ibm+16color, use=screen-bce,
6987 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6988 bce, use=ibm+16color, use=screen-s,
6990 # ======================================================================
6991 # Entries for GNU Screen 4.02 with --enable-colors256.
6993 screen-256color|GNU Screen with 256 colors,
6994 use=xterm+256setaf, use=screen,
6996 screen-256color-s|GNU Screen with 256 colors and status line,
6997 use=xterm+256setaf, use=screen-s,
6999 screen-256color-bce|GNU Screen with 256 colors and BCE,
7000 bce, use=xterm+256setaf, use=screen-bce,
7002 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
7003 bce, use=xterm+256setaf, use=screen-s,
7005 screen.xterm-256color|GNU Screen with xterm using 256 colors,
7006 use=xterm+256setaf, use=screen.xterm-new,
7008 screen.konsole-256color|GNU Screen with konsole using 256 colors,
7009 use=xterm+256setaf, use=screen.konsole,
7011 screen.vte-256color|GNU Screen with vte using 256 colors,
7012 use=xterm+256setaf, use=screen.vte,
7014 screen.putty-256color|GNU Screen with putty using 256 colors,
7015 use=xterm+256setaf, use=screen.putty,
7017 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
7018 use=xterm+256setaf, use=screen.mlterm,
7020 # ======================================================================
7022 # Read the fine manpage:
7023 # When screen tries to figure out a terminal name for
7024 # itself, it first looks for an entry named "screen.<term>",
7025 # where <term> is the contents of your $TERM variable. If
7026 # no such entry exists, screen tries "screen" (or "screen-w"
7027 # if the terminal is wide (132 cols or more)). If even this
7028 # entry cannot be found, "vt100" is used as a substitute.
7030 # Notwithstanding the manpage, screen uses its own notion of the termcap
7031 # and some keys from "screen.<term>" are ignored. Here is an entry which
7032 # covers those (tested with screen 4.00.02) -TD
7033 screen+fkeys|function-keys according to screen,
7034 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
7037 # See explanation before "screen" entry. Cancel italics so that applications
7038 # do not assume screen supports the feature. Add this tweak to entries which
7039 # extend screen for terminals which do support italics.
7040 screen+italics|screen cannot support italics,
7043 # Here are a few customized entries which are useful -TD
7046 # (a) screen does not support invis.
7047 # (b) screen's implementation of bw is incorrect according to tack.
7048 # (c) screen appears to hardcode the strings for khome/kend, making it
7049 # necessary to override the "use=" clause's values (screen+fkeys).
7050 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
7051 # which is NOT the same as the terminfo screen.<term>.
7052 # (e) when screen finds one of these customized entries, it sets $TERM to
7053 # match. Hence, no "screen.xterm" entry is provided, since that would
7054 # create heartburn for people running remote xterm's.
7055 # (f) screen does not support rep.
7057 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
7058 # since the default translations override the built-in keycode
7059 # translation. They are suppressed here to show what is tested by tack.
7060 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
7062 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
7063 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
7064 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
7065 E3@, use=screen+italics, use=screen+fkeys,
7066 use=xterm+x11mouse, use=xterm-new,
7067 #:screen.xterm|screen for modern xterm,
7068 #: use=screen.xterm-new,
7069 # xterm-r6 does not really support khome/kend unless it is propped up by
7070 # the translations resource.
7071 screen.xterm-r6|screen customized for X11R6 xterm,
7072 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
7073 # Color applications running in screen and TeraTerm do not play well together
7074 # on Solaris because Sun's curses implementation gets confused.
7075 screen.teraterm|disable ncv in teraterm,
7077 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7078 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7079 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7080 use=screen+fkeys, use=xterm+x11mouse, use=screen,
7082 screen.rxvt|screen in rxvt,
7084 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7085 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
7086 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
7088 screen.Eterm|screen in Eterm,
7089 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
7090 screen.mrxvt|screen in mrxvt,
7091 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
7092 screen.vte|screen in any VTE-based terminal,
7093 use=xterm+x11mouse, use=screen+italics,
7094 use=screen+fkeys, use=vte,
7095 screen.gnome|screen in GNOME Terminal,
7096 use=xterm+x11mouse, use=screen+italics,
7097 use=screen+fkeys, use=gnome,
7098 screen.konsole|screen in KDE console window,
7099 use=xterm+x11mouse, use=screen+italics,
7100 use=screen+fkeys, use=konsole,
7101 # fix the backspace key
7102 screen.linux|screen in linux console,
7104 kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys,
7106 screen.mlterm|screen in mlterm,
7107 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
7108 screen.putty|screen in putty,
7109 use=xterm+x11mouse, use=screen+fkeys, use=putty,
7111 # The default "screen" entry is reasonably portable, but not optimal for the
7112 # most widely-used terminal emulators. The "bce" capability is supported in
7113 # screen since 3.9.13, and when used, will require fewer characters to be sent
7114 # to the terminal for updates.
7116 # If you are using only terminals which support bce, then you can use this
7117 # feature in your screen configuration.
7119 # Adding these lines to your ".screenrc" file will allow using these customized
7124 screen-bce.xterm-new|screen optimized for modern xterm,
7126 ech@, use=screen+italics, use=screen.xterm-new,
7127 screen-bce.rxvt|screen optimized for rxvt,
7129 ech@, use=screen.rxvt,
7130 screen-bce.Eterm|screen optimized for Eterm,
7132 ech@, use=screen.Eterm,
7133 screen-bce.mrxvt|screen optimized for mrxvt,
7135 ech@, use=screen.mrxvt,
7136 screen-bce.gnome|screen optimized for GNOME-Terminal,
7138 ech@, use=screen+italics, use=screen.gnome,
7139 screen-bce.konsole|screen optimized for KDE console window,
7141 ech@, use=screen+italics, use=screen.konsole,
7142 screen-bce.linux|screen optimized for linux console,
7144 ech@, use=screen.linux,
7146 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
7147 cols#132, use=screen,
7149 screen2|old VT 100/ANSI X3.64 virtual terminal,
7150 cols#80, it#8, lines#24,
7151 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
7152 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7153 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7154 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7155 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
7156 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7157 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
7158 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
7159 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
7160 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
7161 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
7162 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
7163 screen3|older VT 100/ANSI X3.64 virtual terminal,
7165 cols#80, it#8, lines#24,
7166 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7167 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7168 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7169 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
7170 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7171 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
7172 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
7173 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
7174 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
7175 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
7176 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
7177 smul=\E[4m, tbc=\E[3g,
7181 # tmux is mostly compatible with screen, but has support for italics, and some
7182 # of the xterm cursor bits.
7184 # However, unlike screen, tmux has no provision for using derived terminal
7185 # descriptions. When screen starts, it looks for a suitable "inner" terminal
7186 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
7187 # various entries such as screen.xterm-new provide a way to more closely
7188 # match the terminal.
7189 tmux|tmux terminal multiplexer,
7190 invis=\E[8m, rmso=\E[27m,
7191 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
7192 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7193 smso=\E[7m, E3=\E[3J, Smulx=\E[4\:%p1%dm,
7194 use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
7195 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
7198 tmux-256color|tmux with 256 colors,
7199 use=xterm+256setaf, use=tmux,
7204 # http://www.brain-dump.org/projects/dvtm/
7206 # + This uses ncurses to manage the display, including support for italics and
7208 # + However, default-colors are incomplete: do not set bce.
7209 # + It does not implement flash (since no \e[?5h)
7210 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
7211 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
7212 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
7213 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
7215 # + It also omits the shifted cursor- and editing-keypad keys.
7216 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
7217 # (and passes those through without interpretation)
7218 # and may simply pass-through rxvt's, making it appear to work.
7219 # In other cases such as kf23 and up, no pass-through is done.
7220 # + Most of the mode-settings in the initialization/reset strings are not
7221 # implemented; dvtm copies its description from rxvt.
7222 dvtm|dynamic virtual terminal manager,
7223 am, eo, mir, msgr, xenl, AX,
7224 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
7225 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7226 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7227 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7228 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7229 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7230 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7231 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7232 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7233 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7234 is1=\E[?47l\E=\E[?1l,
7235 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
7236 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
7237 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
7238 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
7239 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7240 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
7241 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7242 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7243 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7244 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
7245 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7246 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
7247 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
7248 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7249 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
7251 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
7252 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
7254 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
7256 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
7258 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
7259 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7262 dvtm-256color|dynamic virtual terminal manager with 256 colors,
7263 colors#0x100, pairs#0x10000,
7264 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
7266 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
7272 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
7273 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
7274 # been maintained until recently by the National Center for Supercomputer
7275 # Applications, and it is feature rich, stable and free. It can be downloaded
7276 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
7277 # xterm+sl, and the docs at NCSA. It works well.
7279 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
7280 # The terminal options should be set as follows:
7281 # Xterm sequences ON
7282 # use VT wrap mode ON
7283 # use Emacs arrow keys OFF
7284 # CTRL-COMND is Emacs meta ON
7286 # answerback string: "ncsa-vt220-8"
7287 # setup keys: all disabled
7289 # Application mode is not used.
7291 # Other special mappings:
7298 # PAGEDOWN Next Screen
7300 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
7303 # The status-line manipulation is a mapping of the xterm-compatible control
7304 # sequences for setting the window-title. So you must use tsl and fsl in
7305 # pairs, since the latter ends the string that is loaded to the window-title.
7306 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7307 am, km, mir, msgr, xenl,
7308 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7309 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7310 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7311 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7312 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7313 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7314 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7315 el=\E[K, el1=\E[1K, enacs=\E)0,
7316 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7317 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
7318 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
7319 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
7320 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7321 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
7322 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
7323 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
7324 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
7325 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
7326 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
7327 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
7328 rmso=\E[27m, rmul=\E[24m,
7329 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
7330 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
7332 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
7333 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7334 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
7335 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7336 use=ncsa-m, use=klone+color,
7337 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7339 dsl@, fsl@, tsl@, use=ncsa,
7340 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7342 dsl@, fsl@, tsl@, use=ncsa-m,
7344 # The documented function-key mapping refers to the Apple Extended Keyboard
7345 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
7346 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
7347 # some keyboards and many applications require these as F1-F4.
7349 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
7350 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7351 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7352 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
7353 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
7354 kf8=\E[19~, kf9=\E[20~, use=ncsa,
7356 #### Pilot Pro Palm-Top
7358 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
7359 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
7360 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
7363 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
7364 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
7365 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
7368 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
7369 # These entries are for the Embeddable Linux Kernel System (ELKS)
7370 # project - an heavily stripped down Linux to be run on 16 bit
7371 # boxes or, eventually, to be used in embedded systems - and have been
7372 # adapted from the stock ELKS termcap. The project itself looks stalled,
7373 # and the latest improvements I know of date back to March 2000.
7375 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
7376 # as an added bonus, this deals with all the capabilities common to
7377 # both VT52 and ANSI (or, eventually, "special") modes.
7379 elks-glasstty|ELKS glass-TTY capabilities,
7381 cols#80, it#8, lines#25,
7382 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
7385 elks-vt52|ELKS vt52 console,
7386 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7387 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
7388 home=\EH, use=elks-glasstty,
7390 elks-ansi|ELKS ANSI console,
7391 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7392 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7393 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
7395 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
7396 # instead of VT52, but the "elks" entry still refers to the latter.
7398 elks|default ELKS console,
7401 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
7402 # one but in screen size
7404 sibo|ELKS SIBO console,
7405 cols#61, it#8, lines#20, use=elks-vt52,
7407 ######## COMMERCIAL WORKSTATION CONSOLES
7413 # This is from the OSF/1 Release 1.0 termcap file
7414 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
7417 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7418 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7419 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
7420 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7421 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7426 # :is1: resets scrolling region in case a previous user had used "tset vt100"
7427 oldsun|Sun Microsystems Workstation console,
7428 OTbs, am, km, mir, msgr,
7429 cols#80, it#8, lines#34,
7430 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
7431 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7432 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7433 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7434 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7435 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
7436 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7437 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
7438 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
7439 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
7440 sun-il|Sun Microsystems console with working insert-line,
7443 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7444 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7445 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7446 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7447 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7448 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
7449 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
7450 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
7451 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
7452 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
7453 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
7454 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7455 smso=\E[7m, u8=\E[1t, u9=\E[11t,
7456 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
7457 # flake out on the last line. Unfortunately, without them the terminal has no
7459 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
7460 il@, il1@, use=sun-il,
7461 # If you are using an SS5, change the sun definition to use sun-ss5.
7462 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
7465 sun+sl|Sun Workstation window status line,
7467 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
7469 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
7470 sun-s|Sun Microsystems Workstation window with status line,
7472 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
7473 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
7475 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
7476 sun-48|Sun 48-line window,
7477 cols#80, lines#48, use=sun,
7478 sun-34|Sun 34-line window,
7479 cols#80, lines#34, use=sun,
7480 sun-24|Sun 24-line window,
7481 cols#80, lines#24, use=sun,
7482 sun-17|Sun 17-line window,
7483 cols#80, lines#17, use=sun,
7484 sun-12|Sun 12-line window,
7485 cols#80, lines#12, use=sun,
7486 sun-1|Sun 1-line window for sysline,
7489 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
7490 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
7491 ich1@, rmir@, smir@, use=sun,
7492 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
7494 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
7495 sun-type4|Sun Workstation console with type 4 keyboard,
7496 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
7497 kcuu1=\E[215z, use=sun-il,
7499 # Most of the current references to sun-color are from users wondering why this
7500 # is the default on install. Details from reading the wscons manpage, adding
7501 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
7502 # when those were added -TD (2005-05-28)
7504 # According to wscons manpage, color is supported only on IA systems.
7505 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
7506 # does not list these. It also sets ncv#3, however that corresponds to
7507 # underline and standout.
7509 # Since the documentation and terminfo do not agree, see also current code at
7510 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
7512 # That (actually a different driver which "supports" sun-color) also supports
7519 # It supports bold, but not underline -TD (2009-09-19)
7520 sun-color|Sun Microsystems Workstation console with color support (IA systems),
7521 colors#8, ncv#3, pairs#64,
7522 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
7523 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
7524 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7525 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7527 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7529 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7530 smso=\E[7m, use=sun,
7535 # (wsiris: this had extension capabilities
7536 # :HS=\E7F2:HE=\E7F7:\
7537 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
7538 # See the note on Iris extensions near the end of this file.
7539 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
7540 # <flash> from BRL -- esr)
7541 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
7542 OTbs, OTnc, OTpt, am,
7543 OTkn#3, cols#80, it#8, lines#40,
7544 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
7545 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7546 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
7547 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
7548 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
7549 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
7550 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
7551 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
7556 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
7557 # environment). Note: these have nothing to do with Sony's News workstation
7561 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
7562 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
7563 psterm|psterm-basic|NeWS psterm-80x34,
7564 OTbs, am, hs, km, ul,
7565 cols#80, it#8, lines#34,
7566 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
7567 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
7568 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
7569 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
7570 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
7571 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
7572 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
7574 psterm-96x48|NeWS psterm 96x48,
7575 cols#96, lines#48, use=psterm,
7576 psterm-90x28|NeWS psterm 90x28,
7577 cols#90, lines#28, use=psterm,
7578 psterm-80x24|NeWS psterm 80x24,
7579 cols#80, lines#24, use=psterm,
7580 # This is a faster termcap for psterm. Warning: if you use this termcap,
7581 # some control characters you type will do strange things to the screen.
7582 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
7583 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
7584 OTbs, am, hs, km, ul,
7585 cols#80, it#8, lines#34,
7586 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
7587 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
7588 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
7589 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7590 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
7591 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
7592 smso=^Oo, smul=^Ou, tsl=^Ol,
7596 # Use `glasstty' for the Workspace application
7599 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
7602 cols#80, it#8, lines#24,
7603 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7604 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7605 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7606 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
7607 nextshell|NeXT Shell application,
7610 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
7613 #### Sony NEWS workstations
7616 # (news-unk: this had :KB=news: -- esr)
7617 news-unk|SONY NEWS vt100 emulator common entry,
7618 OTbs, OTpt, am, xenl,
7620 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
7621 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7622 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
7623 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7624 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
7625 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
7626 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
7627 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
7628 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
7629 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7630 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
7631 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7633 # (news-29: this had :TY=ascii: --esr)
7634 news-29|SONY NEWS vt100 emulator with 29 lines,
7635 lines#29, use=news-unk,
7636 # (news-29-euc: this had :TY=euc: --esr)
7637 news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
7639 # (news-29-sjis: this had :TY=sjis: --esr)
7640 news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
7643 # (news-33: this had :TY=ascii: --esr)
7644 news-33|SONY NEWS vt100 with 33 lines,
7645 lines#33, use=news-unk,
7646 # (news-33-euc: this had :TY=euc: --esr)
7647 news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
7649 # (news-33-sjis: this had :TY=sjis: --esr)
7650 news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
7653 # (news-42: this had :TY=ascii: --esr)
7654 news-42|SONY NEWS vt100 with 42 lines,
7655 lines#42, use=news-unk,
7656 # (news-42-euc: this had :TY=euc: --esr)
7657 news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
7659 # (news-42-sjis: this had :TY=sjis: --esr)
7660 news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
7663 # NEWS-OS old termcap entry
7665 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
7666 news-old-unk|SONY NEWS vt100 emulator common entry,
7667 OTbs, OTpt, am, xenl,
7669 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
7670 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7671 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7672 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
7673 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7674 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
7675 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7676 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7677 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7679 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
7680 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
7683 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7687 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
7688 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
7690 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
7693 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
7694 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
7697 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7701 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
7702 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
7705 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7709 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
7710 # also the alias vt100-bm.
7711 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
7714 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7718 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7719 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7722 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7726 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7727 news28|sony vt100 emulator 28 lines,
7730 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7734 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7735 news29|news28-a|sony vt100 emulator 29 lines,
7737 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7741 # (news511: this had :TY=sjis: --esr)
7742 nwp511|nwp-511|nwp-511 vt100,
7743 OTbs, OTpt, am, xenl,
7745 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7746 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7747 ed=\E[J$<30/>, el=\E[K$<3/>,
7748 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7749 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7750 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7751 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7752 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7753 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7754 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7755 # (news517: this had :TY=sjis:. --esr)
7756 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7759 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7760 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7761 tsl=\E[1$}\E[;%df, use=vt200,
7762 # (news517-w: this had :TY=sjis:. --esr)
7763 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7766 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7767 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7768 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7769 tsl=\E[1$}\E[;%df, use=vt200,
7771 #### Common Desktop Environment
7774 # This ships with Sun's CDE in Solaris 2.5
7775 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7776 dtterm|CDE desktop terminal,
7777 am, mir, msgr, xenl, xon,
7778 cols#80, it#8, lines#24, lm#0, ncv@,
7779 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7780 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7781 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
7782 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7783 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7784 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7785 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7786 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7787 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7788 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7789 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7790 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7791 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7792 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7793 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7794 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7795 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7796 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7797 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7798 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7800 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7801 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7802 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7803 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7805 ######## Non-Unix Consoles
7808 #### EMX termcap.dat compatibility modes
7810 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7811 # no_color_video to inform the application that standout(1), underline(2)
7812 # reverse(4) and invisible(64) don't work with color.
7813 emx-base|DOS special keys,
7816 bel=^G, use=ansi.sys,
7818 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7819 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7820 # names longer than 14 characters, the nominal maximum).
7822 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7823 ansi-emx|ANSI.SYS color,
7824 am, bce, eo, mir, msgr, xon,
7825 colors#8, cols#80, it#8, lines#25, pairs#64,
7826 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7827 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
7828 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7829 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7830 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7831 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
7832 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
7833 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7834 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7835 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7836 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7837 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7838 # nice colors for Emacs (white on blue, mode line white on cyan)
7839 ansi-color-2-emx|ANSI.SYS color 2,
7840 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7841 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7842 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7843 smul=\E[1;36;44m, use=ansi-emx,
7844 # nice colors for Emacs (white on black, mode line black on cyan)
7845 ansi-color-3-emx|ANSI.SYS color 3,
7846 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7847 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7848 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7849 smul=\E[0;36;40m, use=ansi-emx,
7850 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7852 cols#80, it#8, lines#24,
7853 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7854 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7855 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7856 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7857 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7858 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
7863 # Use this for cygwin32 (tested with beta 19.1)
7864 # underline is colored bright magenta
7865 # shifted kf1-kf12 are kf11-kf22
7866 cygwinB19|ANSI emulation for cygwin32,
7867 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7868 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7869 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7870 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7871 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7872 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7873 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7876 # Use this for cygwin (tested with version 1.1.0).
7877 # I've combined pcansi and linux. Some values of course were different and
7878 # I've indicated which of these were and which I used.
7879 # Cheers, earnie_boyd@yahoo.com
7880 # several changes based on running with tack and comparing with older entry -TD
7881 # more changes from csw:
7883 # remove eo [erase overstrike with blank]
7884 # change clear was \E[H\E[J now \E[2J (faster?)
7887 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7889 # add cub [cursor back param]
7890 # add cuf [cursor forward param]
7891 # add cuu [cursor up param]
7892 # add cud [cursor down param]
7893 # add hs [has status line]
7894 # add fsl [return from status line]
7895 # add tsl [go to status line]
7896 # add smacs [Start alt charset] (not sure if this works)
7897 # add rmacs [End alt charset] (ditto)
7898 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7899 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7900 # add kb2 [center of keypad]
7901 # add u8 [user string 8] \E[?6c
7902 # add el [clear to end of line] \E[K
7904 # cnorm [make cursor normal] not implemented
7905 # flash [flash] not implemented
7906 # blink [blink] not implemented very usefully in cygwin? \E[5m
7907 # dim [dim] not implemented very usefully in cygwin? \E[2m
7908 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7909 # kNXT [shifted next key] not implemented
7910 # kPRV [shifted prev key] not implemented
7911 # khome [home key] really is \E[1~ NOT \E[H
7912 # tbc [clear tab stops] not implemented
7913 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
7914 # smpch [Start PC charset] is \E[11m, same as smacs
7915 # rmpch [End PC charset] is \E[10m, same as rmacs
7916 # mir [move in insert mode] fails in tack?
7917 # bce [back color erase] causes problems with change background color?
7918 # cvvis [make cursor very visible] causes a stackdump when testing with
7919 # testcurs using the output option? \E[?25h\E[?8c
7920 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7921 # ech [erase characters param] broken \E[%p1%dX
7922 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7925 # Remove cbt since it does not work in current cygwin
7926 # Add 'mir' and 'in' flags based on tack
7927 cygwin|ANSI emulation for Cygwin,
7928 am, hs, mir, msgr, xon,
7929 colors#8, it#8, pairs#64,
7930 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7931 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7932 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7933 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
7934 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7935 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7936 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7937 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7938 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7939 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
7940 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7941 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7942 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7943 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7944 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7945 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7946 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7947 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7948 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7949 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7950 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7951 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7952 %t;8%;%?%p9%t;11%;m,
7953 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7954 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7955 vpa=\E[%i%p1%dd, use=vt102+enq,
7957 # I've supplied this so that you can help test new values and add other
7958 # features. Cheers, earnie_boyd@yahoo.com.
7960 # Some features are from pcansi. The op value is from linux. Function-keys
7961 # are from linux. These have been tested not to cause problems. xenl was in
7962 # this list, but DOES cause problems so it has been removed
7963 cygwinDBG|Debug Version for Cygwin,
7964 am, eo, mir, msgr, xon,
7965 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7966 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7967 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7968 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7969 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7970 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
7971 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7972 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7973 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7974 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7975 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7976 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7977 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7978 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7979 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7980 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7981 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7982 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7983 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7984 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7985 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
7986 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7987 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7988 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7989 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7990 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7991 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7992 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7997 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7998 # encodings used by other x86 environments. All others are invented for DJGPP.
7999 # Oddly enough, while several combinations of modifiers are tabulated, there is
8000 # none for shifted cursor keys.
8052 # Ctrl-Delete \E[43~
8053 # Ctrl-Down Arrow \E[38~
8056 # Ctrl-Insert \E[42~
8057 # Ctrl-Left Arrow \E[39~
8058 # Ctrl-Page Down \E[46~
8059 # Ctrl-Page Up \E[45~
8060 # Ctrl-Right Arrow \E[40~
8061 # Ctrl-Up Arrow \E[37~
8077 # Alt-Down Arrow \E[60~
8081 # Alt-Left Arrow \E[61~
8082 # Alt-Page Down \E[68~
8083 # Alt-Page Up \E[67~
8084 # Alt-Right Arrow \E[62~
8085 # Alt-Up Arrow \E[59~
8114 djgpp|ANSI emulation for DJGPP alpha,
8115 am, bce, msgr, xhp, xon, xt,
8116 colors#8, it#8, pairs#64,
8117 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8118 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8119 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8120 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
8121 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
8122 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8123 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8124 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8125 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
8126 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
8127 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
8128 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
8129 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
8130 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
8131 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
8132 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8133 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
8134 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
8135 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
8136 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
8137 %p6%t;1%;%?%p7%t;8%;m,
8138 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8140 djgpp203|Entry for DJGPP 2.03,
8142 cols#80, it#8, lines#25,
8143 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
8146 djgpp204|Entry for DJGPP 2.04,
8148 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
8149 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
8150 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
8151 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
8152 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8153 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
8154 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
8155 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
8156 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
8157 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8158 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
8159 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
8160 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
8161 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m,
8162 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
8163 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8167 # This is tested using U/Win's telnet. Scrolling is omitted because it is
8168 # buggy. Another odd bug appears when displaying "~" in alternate character
8169 # set (the emulator spits out error messages). Compare with att6386 -TD
8170 uwin|U/Win 3.2 console,
8171 am, eo, in, msgr, xenl, xon,
8172 colors#8, it#8, ncv#58, pairs#64,
8173 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
8174 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
8175 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
8176 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
8177 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
8178 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8179 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
8180 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
8181 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8182 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
8183 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
8184 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
8185 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
8186 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
8187 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
8188 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
8189 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
8190 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
8192 #### Microsoft (miscellaneous)
8194 # This entry fits the Windows NT console when the _POSIX_TERM environment
8195 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
8196 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
8197 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
8198 # systems is not, and (surprise!) they match very well.
8200 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
8201 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
8202 # are the installation instructions a pile of mind-numbing bureaucratese,
8203 # but the termcap entry is actually broken and unusable as given; the :do:
8204 # capability is misspelled "d".
8206 # To use this, you need to a bunch of environment variables:
8208 # SET _POSIX_TERM=on
8210 # SET TERMCAP=location of termcap file in POSIX file format
8211 # which is case-sensitive.
8212 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
8215 # Important note: setting the TMP environment variable in POSIX style renders
8216 # it incompatible with a lot of other applications, including Visual C++. So
8217 # you should have a separate command window just for vi. All the other
8218 # variables may be permanently set in the Control Panel\System applet.
8220 # You can find out more about the restrictions of this facility at
8221 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
8223 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
8224 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
8226 cols#80, it#8, lines#25,
8227 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8228 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8229 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
8230 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
8231 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
8232 # From: jew@venus.sunquest.com
8233 # Date: 19 Feb 93 23:41:07 GMT
8234 # Here's a combination of ansi and vt100 termcap
8235 # entries that works nearly perfectly for me
8236 # (Gateway 2000 Handbook and Microsoft Works 3.0):
8237 pcmw|PC running Microsoft Works,
8239 cols#80, it#8, lines#24, vt#3,
8240 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
8241 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
8242 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
8243 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
8244 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
8245 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8246 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
8247 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
8248 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8249 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8250 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8253 # From: Federico Bianchi
8254 # This is the entry for the OpenNT terminal.
8255 # The ntconsole name is for backward compatibility.
8256 # This is for OpenNT 2.0 and later.
8257 # Later OpenNT was renamed to Interix.
8259 # Presently it is distributed by Microsoft as Services For Unix (SFU).
8260 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
8261 # the documentation dated from 1.9.9e) -TD
8263 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
8264 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
8265 # kf13-kf24 use the shift-key
8266 # kf25-kf36 use the left alt-key
8267 # kf37-kf38 use the control-key
8268 # kf49-kf60 use the shift- and control-keys
8269 # The shifted cursor keys send the sequences originally used for kf61-kf64:
8272 # left=\EF^ (unassigned)
8275 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
8277 cols#80, it#8, lines#25,
8278 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8279 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8280 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8281 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
8282 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
8283 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8284 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8285 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
8286 indn=\E[%p1%dS, kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z,
8287 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
8288 kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB,
8289 kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG,
8290 kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK,
8291 kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP,
8292 kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3,
8293 kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY,
8294 kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd,
8295 kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh,
8296 kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn,
8297 kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr,
8298 kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw,
8299 kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7,
8300 kf8=\EF8, kf9=\EF9, khome=\E[H, kich1=\E[L, kind=\EF+,
8301 kll=\E[U, knp=\E[T, kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n,
8302 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
8303 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
8304 sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m,
8305 smul=\E[4m, use=klone+color,
8307 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
8308 lines#35, use=opennt,
8310 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
8311 lines#50, use=opennt,
8313 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
8314 lines#60, use=opennt,
8316 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
8317 lines#100, use=opennt,
8319 # OpenNT wide terminals
8320 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
8321 cols#125, use=opennt,
8323 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
8324 lines#35, use=opennt-w,
8326 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
8327 lines#50, use=opennt-w,
8329 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
8330 lines#60, use=opennt-w,
8332 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
8333 cols#132, use=opennt,
8335 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
8336 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
8337 rmcup@, smcup@, use=opennt,
8339 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
8340 lines#35, use=opennt-nti,
8342 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
8343 lines#50, use=opennt-nti,
8345 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
8346 lines#60, use=opennt-nti,
8348 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
8349 lines#100, use=opennt-nti,
8351 ######## COMMON TERMINAL TYPES
8353 # This section describes terminal classes and maker brands that are still
8354 # quite common, but have proprietary command sets not blessed by ANSI.
8359 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
8360 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
8361 # Acer has a web site at http://www.acer.com.
8363 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
8364 # His comments suggest they were shipped with the system.
8367 # (altos2: had extension capabilities
8368 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8369 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8370 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8371 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8372 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8373 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
8374 # :HL=^AP\r:SP=\E[i:\
8375 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
8376 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
8377 # Comparison with the k* capabilities makes it obvious that the c* things are
8378 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
8379 # :sr: was given as a boolean-- esr)
8380 altos2|alt2|altos-2|altos II,
8381 cols#80, it#8, lines#24, xmc#0,
8382 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
8383 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
8384 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
8385 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
8386 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
8387 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
8388 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
8389 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8390 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8391 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8392 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8393 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
8394 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
8395 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
8396 # (altos3: had extension capabilities
8397 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8398 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8399 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8400 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8401 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8402 # :HL=^AP\r:SP=\E[i:\
8403 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
8404 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
8405 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
8406 altos4|alt4|altos-4|altos IV,
8408 # (altos7: had extension capabilities:
8409 # :GG#0:GI=\EH8:GF=\EH7:\
8410 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8411 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8412 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8413 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8414 # Comparison with the k* capabilities makes it obvious that the c* things are
8415 # shift keys. I have renamed them to keys 32 and up accordingly. I have
8416 # also made this entry relative to adm12 in order to give it an <sgr>. The
8417 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
8418 altos7|alt7|altos VII,
8420 cols#80, lines#24, xmc#0,
8421 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
8422 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8423 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8424 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
8426 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
8427 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
8428 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
8429 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8430 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8431 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8432 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8433 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
8434 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
8435 rmir=\Er, smir=\Eq, use=adm+sgr,
8436 altos7pc|alt7pc|altos PC VII,
8437 kend=\ET, use=altos7,
8439 #### Hewlett-Packard (hp)
8442 # 8000 Foothills Blvd
8443 # Roseville, CA 95747
8444 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
8445 # 1-(800)-633-3600 (General customer support)
8448 # As of March 1998, HP no longer has any terminals in production.
8449 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
8450 # supported (they still have parts). So are the 2392a and 2394a.
8451 # See the WORKSTATION CONSOLES section for the 700s.
8454 # Generic HP terminal - this should (hopefully) work on any HP terminal.
8455 hpgeneric|hp|hewlett-packard generic terminal,
8456 OTbs, OTpt, am, da, db, mir, xhp,
8457 cols#80, lines#24, lm#0, vt#6,
8458 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8459 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
8460 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
8461 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
8462 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
8465 hp110|hewlett-packard model 110 portable,
8466 lines#16, use=hpgeneric,
8468 hp+pfk+cr|hp function keys with CR,
8469 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
8470 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
8472 hp+pfk-cr|hp function keys w/o CR,
8473 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
8476 # The hp2621s use the same keys for the arrows and function keys,
8477 # but not separate escape sequences. These definitions allow the
8478 # user to use those keys as arrow keys rather than as function
8480 hp+pfk+arrows|hp alternate arrow definitions,
8481 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
8482 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
8483 kll=\Eq\r, kri=\Es\r,
8485 hp+arrows|hp arrow definitions,
8486 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8487 kind=\ES, kll=\EF, kri=\ET,
8489 # Generic stuff from the HP 262x series
8491 hp262x|HP 262x terminals,
8493 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
8494 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8495 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8496 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
8497 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8498 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8499 %;%?%p4%t%{65}%|%;%c,
8500 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
8502 # Note: no <home> on HPs since that homes to top of memory, not screen.
8503 # Due to severe 2621 braindamage, the only way to get the arrow keys to
8504 # transmit anything at all is to turn on the function key labels
8505 # with <smkx>, and even then the user has to hold down shift!
8506 # The default 2621 turns off the labels except when it has to to
8507 # enable the function keys. If your installation prefers labels
8508 # on all the time, or off all the time (at the "expense" of the
8509 # function keys), use 2621-nl or 2621-wl.
8511 # Note: there are newer ROMs for 2621's that allow you to set
8512 # strap A so the regular arrow keys xmit \EA, etc, as with the
8513 # 2645. However, even with this strap set, the terminal stops
8514 # xmitting if you reset it, until you unset and reset the strap!
8515 # Since there is no way to set/unset the strap with an escape
8516 # sequence, we don't use it in the default.
8517 # If you like, you can use 2621-ba (brain-damaged arrow keys).
8518 hp2621-ba|2621 w/new rom and strap A set,
8519 rmkx@, smkx@, use=hp+arrows, use=hp2621,
8521 # hp2621 with function labels. Most of the time they are off,
8522 # but inside vi, the function key labels appear. You have to
8523 # hold down shift to get them to xmit.
8524 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
8525 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
8529 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
8530 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
8531 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
8532 use=hp+pfk+cr, use=hpgeneric,
8534 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
8535 hp2621p|hp 2621 with printer,
8536 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
8538 hp2621p-a|hp2621p with fn as arrows,
8539 use=hp+pfk+arrows, use=hp2621p,
8541 # hp2621 with k45 keyboard
8542 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
8543 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8544 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
8546 # 2621 using all 48 lines of memory, only 24 visible at any time.
8547 hp2621-48|48 line 2621,
8549 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
8552 # 2621 with no labels ever. Also prevents vi delays on escape.
8553 hp2621-nl|hp 2621 with no labels,
8554 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
8557 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
8560 hp2621-nt|hp 2621 w/no tabs,
8563 # Hp 2624 B with 4 or 10 pages of memory.
8565 # Some assumptions are made with this entry. These settings are
8566 # NOT set up by the initialization strings.
8568 # Port Configuration
8573 # Terminal Configuration
8579 # Note: the 2624 DOES have a true <home>, believe it or not!
8581 # The 2624 has an "error line" to which messages can be sent.
8582 # This is CLOSE to what is expected for a "status line". However,
8583 # after a message is sent to the "error line", the next carriage
8584 # return is EATEN and the "error line" is turned back off again!
8585 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
8587 # This entry supports emacs (and any other program that uses raw
8588 # mode) at 4800 baud and less. I couldn't get the padding right
8591 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
8592 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
8595 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
8597 # This hp2626 entry does not use any of the fancy windowing stuff
8600 # Indeed, terminfo does not yet handle such stuff. Since changing
8601 # any window clears memory, it is probably not possible to use
8602 # this for screen opt.
8604 # ed is incredibly slow most of the time - I am guessing at the
8605 # exact padding. Since the terminal uses xoff/xon this is intended
8606 # only for cost computation, so that the terminal will prefer el
8607 # or even dl1 which is probably faster!
8609 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
8610 # extra slow on the last line of the window.
8612 # The padding probably should be changed.
8614 hp2626|hp2626a|hp2626p|hp 2626,
8617 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
8618 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
8619 use=hp+labels, use=scrhp,
8621 # This entry is for sysline. It allocates a 23 line window with
8622 # a 115 line workspace for regular use, and a 1 line window for
8625 # This assumes port 2 is being used.
8626 # Turn off horizontal line, Create ws #1 with 115 lines,
8627 # Create ws #2 with 1 line, Create window #1 lines 1-23,
8628 # Create window #2 lines 24-24, Attach cursor to workspace #1.
8629 # Note that this clears the tabs so it must be done by tset before
8632 hp2626-s|hp 2626 using only 23 lines,
8635 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
8636 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
8637 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
8638 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
8639 # Force terminal back to 24 lines after being 23.
8640 hp2626-ns|hp 2626 using all 24 lines,
8641 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
8642 \s\E&w3f2I\s\E&w7f2p1I\s\r,
8644 # Various entries useful for small windows on 2626.
8645 hp2626-12|hewlett-packard 2626 12 lines,
8646 lines#12, use=hp2626,
8647 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
8648 cols#40, lines#12, use=hp2626,
8649 hp2626-x40|hewlett-packard 2626 40 columns,
8650 cols#40, use=hp2626,
8651 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
8652 lines#11, use=hp2626-s,
8655 # hp2627 color tubes from University of Wisconsin
8657 hp2627a-rev|hp 2627 with reverse video colors,
8658 cr=\r, cud1=\n, ht=^I, ind=\n,
8659 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
8661 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
8662 smul=\E&dD\E&v1S, use=hp2621-nl,
8663 hp2627a|hp 2627 color terminal with no labels,
8664 cr=\r, cud1=\n, ht=^I, ind=\n,
8665 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
8666 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
8667 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
8669 hp2627c|hp 2627 color (cyan) terminal with no labels,
8670 cr=\r, cud1=\n, ht=^I, ind=\n,
8671 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
8672 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
8674 # hp2640a doesn't have the Y cursor addressing feature, and C is
8675 # memory relative instead of screen relative, as we need.
8678 cup@, rmkx@, smkx@, use=hp2645,
8680 hp2640b|hp2644a|hp 264x series,
8681 rmkx@, smkx@, use=hp2645,
8683 # (hp2641a: removed unknown :gu: -- esr)
8684 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
8685 am, da, db, mir, xhp,
8687 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8688 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8689 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
8690 if=/usr/share/tabset/std, il1=\EL, ind=\n,
8691 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8692 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8695 # This terminal should be used at 4800 baud or less. It needs padding for
8696 # plain characters at 9600, I guessed at an appropriate cr delay. It really
8697 # wants ^E/^F handshaking, but that doesn't work well even if you write
8698 # software to support it.
8699 hp2645|hp45|HP 2645 series,
8701 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
8702 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8703 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
8704 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
8706 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8707 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
8708 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
8709 # You should use this terminal at 4800 baud or less.
8710 hp2648|hp2648a|HP 2648a graphics terminal,
8711 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
8712 dch1=\EP$<7>, ip=$<5>, use=hp2645,
8714 # The HP 150 terminal is a fairly vanilla HP terminal, with the
8715 # clreol standout problem. It also has graphics capabilities and
8716 # a touch screen, which we don't describe here.
8717 hp150|hewlett packard Model 150,
8720 # HP 2382a terminals, "the little ones." They don't have any
8721 # alternate character set support and sending out ^N/^O will
8722 # leave the screen blank.
8723 hp2382a|hp2382|hewlett packard 2382a,
8727 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8730 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8731 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8732 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8734 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8736 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8737 use=hp+pfk+arrows, use=hp2621-fl,
8739 # newer hewlett packard terminals
8741 newhpkeyboard|generic entry for HP extended keyboard,
8742 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8743 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8744 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8745 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8748 newhp|generic entry for new hewlett packard terminals,
8749 am, bw, mir, xhp, xon,
8750 cols#80, lines#24, pb#4800,
8751 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8753 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
8754 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8755 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
8756 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
8757 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8758 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8759 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8760 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8761 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8762 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8763 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8764 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8765 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8766 tbc=\E3, use=newhpkeyboard,
8768 memhp|memory relative addressing for new HP ttys,
8770 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8771 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8772 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8773 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8775 scrhp|screen relative addressing for new HP ttys,
8776 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8777 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8778 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8779 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8780 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8782 # (hp+labels: added label values from a BRL termcap -- esr)
8783 hp+labels|"standard" label info for new HP ttys,
8785 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8786 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8788 rmln=\E&j@, smln=\E&jB,
8790 hp+printer|"standard" printer info for HP ttys,
8791 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8794 # The new hp2621b is kind of a cross between the old 2621 and the
8795 # new 262x series of machines. It has dip-switched options.
8796 # The firmware has a bug in it such that if you give it a null
8797 # length label, the following character is eaten!
8798 hp2621b|hp 2621b with old style keyboard,
8799 lh#1, lm#48, lw#8, nlab#8,
8800 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8801 kind=\ET, kll=\EF, kri=\ES,
8802 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8803 %;%p2%s\E%{111}%p1%+%c\r,
8804 smln=\E&jB, use=hp2621,
8806 hp2621b-p|hp 2621b with printer,
8807 use=hp+printer, use=hp2621b,
8809 # hp2621b - new 2621b with new extended keyboard
8810 # these are closer to the new 26xx series than the other 2621b
8811 hp2621b-kx|hp 2621b with extended keyboard,
8812 use=newhpkeyboard, use=hp2621b,
8814 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8815 use=hp+printer, use=hp2621b-kx,
8817 # Some assumptions are made in the following entries.
8818 # These settings are NOT set up by the initialization strings.
8820 # Port Configuration
8821 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8823 # Terminal Configuration
8824 # InhHndShk(G)=Yes InhDC2(H)=Yes
8825 # XmitFnctn(A)=No InhEolWrp=No
8828 # Hp 2622a & hp2623a display and graphics terminals
8830 hp2622|hp2622a|hp 2622,
8833 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8835 # The 2623 is a 2622 with extra graphics hardware.
8836 hp2623|hp2623a|hp 2623,
8839 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8840 use=hp+printer, use=hp2624,
8842 # The hewlett packard B can have an optional extra 6 pages of memory.
8843 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8846 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8847 lm#240, use=hp2624b-p,
8849 # Color manipulations for HP terminals
8850 hp+color|hp with colors,
8852 colors#16, ncv#17, pairs#7,
8853 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8854 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8855 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8856 %t1%e.%p7%d%;z%p1%dI,
8857 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8858 I\E&v1b1c6I\E&v1x1y7I,
8859 op=\E&v0S, scp=\E&v%p1%dS,
8861 # <is2> sets the screen to be 80 columns wide
8862 hp2397a|hp2397|hewlett packard 2397A color terminal,
8863 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8865 # HP 700/44 Setup parameters:
8866 # Terminal Mode HP-PCterm
8867 # Inhibit Auto Wrap NO
8868 # Status Line Host Writable
8869 # PC Character Set YES
8870 # Twenty-Five Line Mode YES
8871 # XON/XOFF @128 or 64 (sc)
8872 # Keycode Mode NO or YES (sc)
8873 # Backspace Key BS or BS/DEL
8875 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8876 # \E\\? does not turn off keycode mode
8877 # <smsc> sets alternate start/stop; keycode on
8878 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8881 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8883 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8884 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8885 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8886 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8888 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8889 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8890 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8891 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8892 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8893 kpp=\E[5~, rmam=\E[?7l,
8894 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8895 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8896 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8897 smul=\E[4m, xoffc=g, xonc=e,
8899 # (hp2392: copied <rmir> here from hpex -- esr)
8902 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8903 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8904 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8905 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8908 hpsub|hp terminals -- capability subset,
8909 am, da, db, mir, xhp, xon,
8911 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8912 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8913 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
8914 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8915 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8916 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8919 # May be used for most 24 x 80 hp terminals,
8920 # but has no padding added, so may allow runover in some terminals at high
8921 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8922 # hp98x5 terminal emulators or hp98x6 consoles.
8923 # Adds xy-cursor addressing, vertical cursor addressing, home,
8924 # last line, and underline capabilities.
8926 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8927 # moved <rmir> here from hpsub -- esr)
8928 hpex|hp extended capabilities,
8929 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
8930 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
8931 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8933 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8934 hp2|hpex2|hewlett-packard extended capabilities newer version,
8935 am, da, db, mir, xhp,
8936 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8937 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8938 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8939 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8940 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8941 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8942 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8943 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8944 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8945 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8946 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8947 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8948 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8949 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8950 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8951 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8952 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8953 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8954 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8957 # From: <ddavis@ic.berkeley.edu>
8958 hp236|hp236 internal terminal emulator,
8961 clear=\EF, cnorm=\EDE, cub1=^H,
8962 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8963 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8964 sgr0=\ECI, smso=\EBI,
8966 # This works on a hp300 console running Utah 4.3 BSD
8967 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8968 hp300h|HP Catseye console,
8969 OTbs, am, da, db, mir, xhp,
8970 cols#128, lines#51, lm#0, xmc#0,
8971 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8972 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8973 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8974 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
8975 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8976 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8977 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8979 # From: Greg Couch <gregc@ernie.berkeley.edu>
8980 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8981 OTbs, am, da, db, mir, xhp,
8982 cols#128, it#8, lines#46, lm#0,
8983 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8984 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8985 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8986 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8987 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8988 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8989 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8990 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8991 tbc=\E3, vpa=\E&a%p1%dY,
8992 # HP 9845 desktop computer from BRL
8993 # (hp9845: removed unknown capability :gu: -- esr)
8995 OTbs, am, da, db, eo, mir, xhp,
8997 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8998 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8999 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
9000 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
9001 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
9002 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
9003 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
9004 hp98550|hp98550a|HP 9000 Series 300 color console,
9005 OTbs, am, da, db, mir, xhp,
9006 cols#128, it#8, lines#49, lm#0,
9007 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
9008 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
9009 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
9010 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
9011 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
9012 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9013 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
9014 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
9015 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
9016 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
9017 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
9018 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
9019 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9020 # From: Victor Duchovni <vic@fine.princeton.edu>
9021 # (hp700-wy: removed obsolete ":nl=^J:";
9022 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
9023 hp700-wy|HP700/41 emulating wyse30,
9024 OTbs, am, bw, mir, msgr,
9025 cols#80, it#8, lines#24, xmc#1,
9026 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9027 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9028 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
9029 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
9030 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
9031 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
9032 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
9033 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
9034 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
9035 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
9036 hp70092|hp70092a|hp70092A|HP 700/92,
9038 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
9039 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
9040 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
9041 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
9042 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
9043 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
9044 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
9045 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
9046 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
9047 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
9048 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
9049 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
9050 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
9051 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
9053 bobcat|sbobcat|HP 9000 model 300 console,
9054 am, da, db, mir, xhp,
9055 cols#128, it#8, lines#47, xmc#0,
9056 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
9057 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
9058 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
9059 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
9060 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
9061 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
9062 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
9063 gator-t|HP 9000 model 237 emulating extra-tall AAA,
9064 lines#94, use=gator,
9065 gator|HP 9000 model 237 emulating AAA,
9067 cols#128, it#8, lines#47,
9068 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
9069 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
9070 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
9071 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
9072 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
9073 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
9074 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
9075 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9076 gator-52|HP 9000 model 237 emulating VT52,
9077 cols#128, lines#47, use=vt52,
9078 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
9079 lines#94, use=gator-52,
9083 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
9086 # Honeywell Bull terminal. Its cursor and function keys send single
9087 # control characters and it has standout/underline glitch. Most programs
9088 # do not like these features/bugs. Visual bell is realized by flashing the
9089 # "keyboard locked" LED.
9090 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
9092 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
9093 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
9094 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
9095 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
9096 dku7003|Honeywell Bull DKU 7003 all features described,
9099 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
9100 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9103 #### Lear-Siegler (adm)
9105 # These guys are long since out of the terminals business, but
9106 # in 1995 many current terminals still have an adm type as one of their
9107 # emulations (usually their stupidest, and usually labeled adm3, though
9108 # these `adm3' emulations normally have adm3a+ capabilities).
9110 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
9111 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
9112 # was being held to ground would trigger a send of the top line on the screen.
9113 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
9114 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
9115 # for clearing up this point.)
9117 adm1a|adm1|lsi adm1a,
9120 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9121 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
9126 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9127 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9128 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
9129 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9130 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
9134 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
9135 # The following ADM-3A switch settings are assumed for normal operation:
9136 # SPACE U/L_DISP CLR_SCRN 24_LINE
9137 # CUR_CTL LC_EN AUTO_NL FDX
9138 # Other switches may be set for operator convenience or communication
9139 # requirements. I recommend
9140 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
9142 # Most of these terminals required an option ROM to support lower case display.
9143 # Open the case and look at the motherboard; if you see an open 24-pin DIP
9144 # socket, you may be out of luck.
9146 # (adm3a: some capabilities merged in from BRl entry -- esr)
9150 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
9151 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9152 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
9156 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
9159 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
9160 rmso=\EG, smso=\EG, use=adm3a+,
9161 # A lot of terminals other than adm11s use these. Wherever you see
9162 # use=adm+sgr with some of its capabilities disabled, try the
9163 # disabled ones. They may well work but not have been documented or
9164 # expressed in the using entry. We'd like to cook up an <sgr> but the
9165 # <rmacs>/<smacs> sequences of the using entries vary too much.
9166 adm+sgr|adm style highlight capabilities,
9167 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
9168 smso=\EG4, smul=\EG8,
9169 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
9170 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
9171 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
9172 # be ^Z, according to his entry.
9173 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
9174 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
9177 OTkn#8, cols#80, lines#24,
9178 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
9179 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9180 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
9181 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9182 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9183 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
9185 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
9186 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
9187 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
9188 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
9189 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
9190 # via BRL. That entry asserted <xmc#1>, but I've left that out because
9191 # neither earlier nor later ADMSs have it -- esr)
9193 # You will need to get into the supervisor setup before you can set
9194 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
9195 # see a lot more setup options.
9197 # While in supervisor setup you can also use following codes:
9199 # Ctrl-P Personality character selections (configure for example what
9200 # arrow keys send, if I recall correctly)
9201 # Ctrl-T tabs 1-80 use left&right to move and up to set and
9202 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
9203 # Ctrl-B Binary setup (probably not needed. I think that everything can
9204 # be set using normal setup)
9205 # Ctrl-A Answerback mode (enter answerback message)
9206 # Ctrl-U User friendly mode (normal setup)
9207 # Ctrl-D Defaults entire setup and function keys from EPROM tables
9208 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
9209 # Ctrl-R Reads both setup and functions keys from NVM.
9210 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
9212 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
9213 # RTS/CTS used nowadays with virtually every modem and computer. 19200
9214 # bps works fine with hardware flow control.
9216 # The following null-modem cable should fix this and enable you to use
9217 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
9218 # set ADM-12+ for DTR handshaking from supervisor setup.
9231 OTbs, OTpt, am, mir,
9232 OTug#1, cols#80, it#8, lines#24,
9233 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9234 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9235 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
9236 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
9237 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
9238 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
9239 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9240 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9241 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
9243 # (adm20: removed obsolete ":kn#7:" -- esr)
9244 adm20|lear siegler adm20,
9246 cols#80, it#8, lines#24,
9247 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
9248 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
9249 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
9250 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
9252 adm21|lear siegler adm21,
9254 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
9255 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
9256 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9257 use=adm+sgr, use=adm3a,
9258 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
9259 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
9260 # removed bogus-looking \200 from before <cup>. -- esr)
9264 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9265 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9266 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
9267 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
9269 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9270 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9271 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9272 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
9273 # ADM 31 DIP Switches
9275 # This information comes from two versions of the manual for the
9276 # Lear-Siegler ADM 31.
9280 # +-||||-------------------------------------+
9295 # +----------------------------------------------+
9296 # front of case (keyboard)
9298 # S1 - Data Rate - Modem
9299 # S2 - Data Rate - Printer
9300 # ------------------------
9302 # -------------------
9320 # S3 - Interface/Printer/Attributes
9321 # ---------------------------------
9322 # Printer Busy Control
9325 # off off off Busy not active, CD disabled
9326 # off off on Busy not active, CD enabled
9327 # off on off Busy active on J5-20, CD disabled
9328 # on off off Busy active on J5-19, CD disabled - Factory Set.
9329 # on off on Busy active on J5-19, CD enabled
9331 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
9333 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
9335 # sw6 ON enables printer BUSY active LOW - Factory Setting
9336 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
9338 # sw7 ON - steady cursor - Factory Setting
9339 # OFF - blinking cursor
9341 # sw8 ON causes selected attribute character to be displayed
9342 # OFF causes SPACE to be displayed instead - Factory Setting
9348 # sw4 sw1 sw2 sw3 sw4
9349 # ---------------------------
9350 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
9351 # Current Loop disabled - Factory Setting
9352 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
9354 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
9355 # Current Loop Disabled
9357 # sw5 ON disables dot stretching mode - Factory Setting
9358 # OFF enables dot stretching mode
9359 # sw6 ON enables blanking function
9360 # OFF enables underline function - Factory Setting
9361 # sw7 ON causes NULLS to be displayed as NULLS
9362 # OFF causes NULLS to be displayed as SPACES - Factory Setting
9364 # S5 - Word Structure
9365 # -------------------
9366 # sw1 ON enables BREAK key - Factory Setting
9367 # OFF disables BREAK key
9368 # sw2 ON selects 50Hz monitor refresh rate
9369 # OFF selects 60Hz monitor refresh rate - Factory Setting
9371 # Modem Port Selection
9374 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
9375 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
9376 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
9377 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
9378 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
9379 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
9380 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
9381 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
9383 # sw6 ON sends bit 8 a 1 (mark)
9384 # OFF sends bit 8 as 0 (space) - Factory Setting
9385 # sw7 ON selects Block Mode
9386 # OFF selects Conversation Mode - Factory Setting
9387 # sw8 ON selects Full Duplex operation
9388 # OFF selects Half Duplex operation - Factory Setting
9392 # sw1, sw2, sw6, sw7 Reserved - Factory 0
9394 # Printer Port Selection
9395 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
9397 # sw8 ON enables Printer Port
9398 # OFF disables Printer Port - Factory Setting
9400 # S7 - Polling Address
9401 # --------------------
9402 # sw1-7 Establish ASCII character which designates terminal polling address
9404 # OFF = logic 1 - Factory Setting
9405 # sw8 ON enables Polling Option
9406 # OFF disables Polling Option - Factory Setting
9409 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
9411 # This adm31 entry uses underline as the standout mode.
9412 # If the adm31 gives you trouble with standout mode, check the DIP switch in
9413 # position 6, bank @c11, 25% from back end of the circuit board. Should be
9414 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
9415 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
9416 adm31|lsi adm31 with sw6 set for underline mode,
9419 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9420 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9421 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
9422 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9423 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9424 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
9425 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
9426 adm31-old|o31|old adm31,
9427 rmul@, smso=\EG4, smul@, use=adm31,
9428 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
9432 if=/usr/share/tabset/vt100,
9433 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
9434 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
9438 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9439 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9440 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
9441 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
9442 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
9443 smir=\Eq, smul@, use=adm+sgr,
9444 # The following termcap for the Lear Siegler ADM-42 leaves the
9445 # "system line" at the bottom of the screen blank (for those who
9446 # find it distracting otherwise)
9447 adm42-ns|lsi adm-42 with no system line,
9448 cbt=\EI\EF \011, clear=\E;\EF \011,
9449 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
9450 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
9451 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
9452 smir=\Eq\EF \011, use=adm42,
9453 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
9454 # The insert mode of this terminal is commented out because it's broken for our
9455 # purposes in that it will shift the position of every character on the page,
9456 # not just the cursor line!
9457 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
9458 adm1178|1178|lsi adm1178,
9460 cols#80, lines#24, xmc#1,
9461 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
9462 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9463 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
9464 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
9465 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
9466 sgr0=\E), smso=\EG4, smul=\EG1,
9470 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
9471 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
9472 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
9474 # ComputerVision Services
9475 # 500 Old Connecticut Path
9479 # Standout mode is dim reverse-video.
9480 pt100|pt200|wren|fenix|prime pt100/pt200,
9482 cols#80, it#8, lines#24,
9483 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
9484 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
9485 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
9486 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
9487 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
9488 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
9489 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
9490 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
9492 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
9494 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
9495 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
9497 cup=\E[%i%p1%d;%p2%dH, use=pt100,
9499 rmso@, smso@, use=pt100,
9500 pt250w|Prime PT250 in 132-column mode,
9501 rmso@, smso@, use=pt100w,
9506 # 3475-A North 1st Street
9508 # Vox: (800)-457-4447
9509 # Fax: (408)-473-1510
9510 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
9512 # Qume was bought by Wyse, but still (as of early 1995) has its own support
9513 # group and production division.
9515 # Discontinued Qume models:
9517 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
9518 # built to replace them, and a qvt119+ which was a 101+ with available wide
9519 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
9520 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
9521 # ANSI-compatible terminals with the qvt323 and qvt61.
9523 # Current Qume models (as of February 1995):
9525 # All current Qume terminals have ANSI-compatible operation modes.
9526 # Qume is still producing the qvt62, which features emulations for other
9527 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
9528 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
9529 # with many emulations including Wyse370, Wyse 325, etc. Their newest
9530 # model is the qvt520, which is vt420-compatible.
9532 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
9534 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
9535 # setup mode. Shift-s should be a configuration save to NVRAM.
9537 qvt101|qvt108|qume qvt 101 and QVT 108,
9540 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
9541 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
9542 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
9543 # What seems to be going on here is that this entry was designed so that
9544 # the normal highlight is bold and standout is dim plus something else
9545 # (reverse-video maybe? But then, are there two <rev> sequences?)
9547 # Added kdch1, kil1, kdl1 based on screenshot -TD:
9548 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
9549 qvt101+|qvt101p|qume qvt 101 PLUS product,
9551 cols#80, lines#24, xmc#0,
9552 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
9553 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9554 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
9555 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9556 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
9557 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9558 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
9559 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9560 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
9561 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9562 qvt102|qume qvt 102,
9563 cnorm=\E., use=qvt101,
9564 # (qvt103: added <rmam>/<smam> based on init string -- esr)
9565 qvt103|qume qvt 103,
9567 cols#80, it#8, lines#24, vt#3,
9568 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9569 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
9570 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
9571 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
9572 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
9573 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
9574 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9575 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
9576 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
9577 rmso=\E[m$<2>, rmul=\E[m$<2>,
9578 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9579 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
9581 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
9582 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9583 qvt103-w|qume qvt103 132 cols,
9585 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
9586 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
9588 cols#80, lines#24, xmc#0,
9589 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
9590 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9591 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
9592 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
9593 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
9594 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
9595 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9596 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9597 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
9598 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9599 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
9600 lines#25, use=qvt119+,
9601 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
9603 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
9604 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
9605 lines#25, use=qvt119+,
9606 qvt203|qvt203+|qume qvt 203 Plus,
9607 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
9608 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
9609 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
9610 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
9611 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
9613 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
9615 # Since a command is present for enabling 25 data lines,
9616 # a specific terminfo entry may be generated for the 203.
9617 # If one is desired for the QVT 119 PLUS then 25 lines must
9618 # be selected in the status line (setup line 9).
9620 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
9622 is2=\E[=40h\E[?3l, use=qvt203,
9623 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
9625 rs2=\E[?3h\E[=40h, use=qvt203,
9627 #### Televideo (tvi)
9630 # 550 East Brokaw Road
9631 # PO Box 49048 95161
9633 # Vox: (408)-954-8333
9634 # Fax: (408)-954-0623
9637 # These require incredible amounts of padding.
9639 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
9640 # Televideo terminals are ANSI and PC-ANSI compatible.
9642 tvi803|televideo 803,
9643 clear=\E*$<10>, use=tvi950,
9645 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
9646 # Switch settings are:
9667 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
9683 # U do CR/LF when CR received
9684 # D do CR when CR received
9706 # S2 6 Cursor down key
9710 # S2 7 Screen colour
9714 # S2 8 DSR status (pin 6)
9718 # S2 9 DCD status (pin 8)
9722 # S2 10 DTR status (pin 20)
9725 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
9726 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
9727 tvi910|televideo model 910,
9729 cols#80, it#8, lines#24, xmc#1,
9730 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9731 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9732 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
9733 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
9734 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9735 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9736 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9737 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9738 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9739 # as subsequently hacked over by someone at SCO
9740 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9742 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9745 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9746 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9747 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9748 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9751 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9752 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9753 # D U D D 8O1 D U U U 8E2
9755 # S1 9 Autowrap (U = on, D = off)
9756 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9757 # S2 1 Mode (U = block, D = conversational)
9758 # S2 2 Duplex (U = half, D = full)
9759 # S2 3 Hertz (U = 50, D = 60)
9760 # S2 4 Edit mode (U = local, D = duplex)
9761 # S2 5 Cursor type (U = underline, D = block)
9762 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9763 # S2 7 Screen colour (U = green on black, D = black on green)
9764 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9765 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9766 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9768 tvi910+|televideo 910+,
9769 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9770 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9771 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9772 ll=\E=7\s, use=tvi910,
9774 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9775 # <khome> from BRL entry -- esr)
9776 tvi912|tvi914|tvi920|old televideo 912/914/920,
9777 OTbs, OTpt, am, msgr,
9778 cols#80, it#8, lines#24, xmc#1,
9779 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9780 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9781 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9782 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9783 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
9784 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9785 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9786 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9788 # We got some new tvi912c terminals that act really weird on the regular
9789 # termcap, so one of our gurus worked this up. Seems that cursor
9790 # addressing is broken.
9791 tvi912cc|tvi912 at cowell college,
9794 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9795 # From: Benjamin C. W. Sittler
9797 # Someone has put a scanned copy of the manual online at:
9798 # http://vt100.net/televideo/912b-om/
9800 # These terminals were produced ca. 1979, and had a 12" monochrome
9801 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9802 # ASCII, and were generally similar to adm3a but with attributes
9803 # (including some with magic cookies), fancy half-duplex mode, and
9806 # Some operations require truly incredible amounts of padding. The
9807 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9808 # are so slow as to be nearly unusable.
9810 # There may or may not have been a separate, earlier series of 912/920
9811 # terminals (without the "B" and "C" suffix); I have never seen one,
9812 # and the manual only describes the "B" and "C" series. The 912 and 920
9813 # are quite distinct from the 914 and 924, which were much nicer non-
9814 # magic-cookie terminals similar to the 950.
9816 # This is a new description for the following TeleVideo terminals,
9817 # distinguished chiefly by their keyboards:
9819 # TVI-912B - very odd layout, no function keys (84 keys)
9820 # TVI-920B - typewriter layout, no function keys (103 keys)
9821 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9822 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9824 # To choose a setting for the TERM variable, start with the model:
9826 # Model || base name
9827 # ----------||-----------
9828 # TVI-912B || tvi912b
9829 # TVI-912C || tvi912c
9830 # TVI-920B || tvi920b
9831 # TVI-920C || tvi920c
9833 # Then add a suffix from the following table describing installed options
9834 # and how you'd like to use the terminal:
9836 # Use Video | Second | Visual | Magic | Page || feature
9837 # Attributes | Page | Bell | Cookies | Print || suffix
9838 # ------------|--------|--------|---------|-------||---------
9839 # No | No | N/A | N/A | No || -unk
9840 # No | No | N/A | N/A | Yes || -p
9841 # No | Yes | No | N/A | No || -2p-unk
9842 # No | Yes | No | N/A | Yes || -2p-p
9843 # No | Yes | Yes | N/A | No || -vb-unk
9844 # No | Yes | Yes | N/A | Yes || -vb-p
9845 # Yes | No | N/A | No | N/A ||
9846 # Yes | No | N/A | Yes | N/A || -mc
9847 # Yes | Yes | No | No | N/A || -2p
9848 # Yes | Yes | No | Yes | N/A || -2p-mc
9849 # Yes | Yes | Yes | No | N/A || -vb
9850 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9852 # So e.g. a model 920 C with second page memory option, visual bell
9853 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9854 # second page memory option and using magic cookies would be
9859 # At 9600 baud, the terminal is prone to overflow its input buffer
9860 # during complex operations (insert/delete
9861 # character/line/screen/page), and it does not signal this over the
9862 # RS232 cable. The typical symptom of an overrun is that the terminal
9863 # starts beeping, and output becomes garbled.
9865 # The padding delays in this terminfo were derived using tack(1)
9866 # running on a Linux box connected to a TVI-920C with a later-model
9867 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9868 # vary. The numbers below seem to give the terminal enough time so
9869 # that it doesn't overflow its input buffer and start losing
9874 # If you want to use the FUNCT key on a tvi912[bc], use the
9875 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9876 # the following table (these also work on the 920 series):
9878 # Unshifted Function Keys:
9880 # Key | capname|| Equivalent
9881 # -----|--------||------------
9882 # F1 | <kf1> || FUNCT + @
9883 # F2 | <kf2> || FUNCT + A
9884 # F3 | <kf3> || FUNCT + B
9885 # F4 | <kf4> || FUNCT + C
9886 # F5 | <kf5> || FUNCT + D
9887 # F6 | <kf6> || FUNCT + E
9888 # F7 | <kf7> || FUNCT + F
9889 # F8 | <kf8> || FUNCT + G
9890 # F9 | <kf9> || FUNCT + H
9891 # F10 | <kf10> || FUNCT + I
9892 # F11 | <kf11> || FUNCT + J
9894 # Shifted Function Keys:
9896 # SHIFT + Key | capname|| Equivalent
9897 # -------------|--------||------------
9898 # SHIFT + F1 | <kf12> || FUNCT + `
9899 # SHIFT + F2 | <kf13> || FUNCT + a
9900 # SHIFT + F3 | <kf14> || FUNCT + b
9901 # SHIFT + F4 | <kf15> || FUNCT + c
9902 # SHIFT + F5 | <kf16> || FUNCT + d
9903 # SHIFT + F6 | <kf17> || FUNCT + e
9904 # SHIFT + F7 | <kf18> || FUNCT + f
9905 # SHIFT + F8 | <kf19> || FUNCT + g
9906 # SHIFT + F9 | <kf20> || FUNCT + h
9907 # SHIFT + F10 | <kf21> || FUNCT + i
9908 # SHIFT + F11 | <kf22> || FUNCT + j
9910 # PORTS AND SWITCH SETTINGS
9912 # Here are the switch settings for the TVI-912B/TVI-920B and
9913 # TVI-912C/TVI-920C:
9915 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9916 # 2: 9600 3: 4800 4: 2400 5: 1200
9917 # 6: 600 7: 300 8: 150 9: 75
9920 # S2 UART/Terminal options:
9922 # 1: Not used Not allowed
9923 # 2: Alternate character set Standard character set
9924 # 3: Full duplex Half duplex
9925 # 4: 50 Hz refresh 60 Hz refresh
9926 # 5: No parity Send parity
9927 # 6: 2 stop bits 1 stop bit
9928 # 7: 8 data bits 7 data bits
9929 # 8: Not used Not allowed on Rev E or lower
9930 # 9: Even parity Odd parity
9931 # 10: Steady cursor Blinking cursor
9932 # (On Rev E or lower, use W25 instead of switch 10.)
9934 # S5 UART/Terminal options:
9936 # 1: P3-6 Not connected DSR received on P3-6
9937 # 2: P3-8 Not connected DCD received on P3-8
9939 # 3 Open, 4 Open: P3-20 Not connected
9940 # 3 Open, 4 Closed: DTR on when terminal is on
9941 # 3 Closed, 4 Open: DTR is connected to RTS
9942 # 3 Closed, 4 Closed: Not allowed
9944 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9945 # all data transmitted out of the modem port (P3) will also be
9946 # transmitted out of the printer port (P4).
9948 # 6 Open, 7 Open: Not allowed
9949 # 6 Open, 7 Closed: 20ma current loop input
9950 # 6 Closed, 7 Open: RS232 input
9951 # 6 Closed, 7 Closed: Not allowed
9954 # If the jumper is installed, the effect will occur (the next time the terminal
9957 # S4/W31: Enables automatic LF upon receipt of CR from
9958 # remote or keyboard.
9959 # S4/W32: Enables transmission of EOT at the end of Send. If not
9960 # installed, a carriage return is sent.
9961 # S4/W33: Disables automatic carriage return in column 80.
9962 # S4/W34: Selects Page Print Mode as initial condition. If not
9963 # installed, Extension Mode is selected.
9965 # NON-STANDARD CAPABILITIES
9967 # Sending <u9> or <u7> returns a cursor position report in the format
9968 # YX\r, where Y and X are as in <cup>. This format is described in
9969 # <u8> and <u6>, but it's not clear how one should write an
9970 # appropriate scanf string, since we need to subtract %' ' from the
9971 # character after reading it. The <u9> capability is used by tack(1)
9972 # to synchronize during padding tests, and seems to work for that
9975 # This description also includes the obsolete termcap capabilities
9976 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9978 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9980 # The FUNCT modifier actually works with every normal key by sending
9981 # ^AX\r, where X is the sequence normally sent by that key. This is a
9982 # sort of meta key not currently describable in terminfo.
9984 # There are quite a few other keys (especially on the 920 models,) but
9985 # they are for the most part only useful in block mode.
9987 # These terminals have lots of forms manipulation features, mainly
9988 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9989 # spaces"; nulls are sentinels for "send X" operations); "send X"
9990 # operations for uploading all or part of the screen; and block-mode
9991 # editing keys (they don't send escape sequences, but manipulate video
9992 # memory directly). Block mode is used for local editing, and protect
9993 # mode (in conjunction with the "write protect" attribute,
9994 # a.k.a. half-intensity outside of protect mode) is used to control
9995 # which parts of the screen are edited/sent/printed (by <mc0>).
9997 # There are at least two major families of ROM, "early" and
9998 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9999 # support a few extra escape sequences for manipulating the off-screen
10000 # memory page, and for sending whole pages back to the host (mainly
10001 # useful in block mode.) The descriptions in this file don't use any
10002 # of those sequences: set cursor position including page (\E-PYX,
10003 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
10004 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
10005 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
10006 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
10007 # are as in <cup>, and some "send page" features mainly useful for
10008 # forms manipulation.
10010 # The keyboard enable (\E") and disable (\E#) sequences are unused,
10011 # except that a terminal reset (<is2>) enables the keyboard.
10013 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
10014 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
10018 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
10019 # sequences (I infer that in some TeleVideo terminal they may invert
10020 # and uninvert the display) so the <flash> sequence given here is a
10021 # cheesy page-flip instead.
10023 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
10024 # tack(1), so it is not included in the descriptions below.
10026 # It's not clear whether auto_left_margin (<bw>) flag should be set
10027 # for these terminals; tack says yes, so it is set here, but this
10028 # differs from other descriptions I've seen.
10030 # Extension print mode (<mc5>) echoes all characters to the printer
10031 # port [in addition to displaying them] except for the page print mode
10032 # sequence (<mc4>); this is a slight violation of the terminfo
10033 # definition for <mc5> but I don't expect it to cause problems. We
10034 # reset to page print mode in <rs1> since it may have been enabled
10037 # The descriptions with plus signs (+) are building blocks.
10039 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
10040 OTbs, OTpt, am, bw,
10041 cols#80, it#8, lines#24,
10042 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10043 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
10044 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
10045 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
10046 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
10047 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
10048 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
10049 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
10050 u7=\E?, u8=%c%c\r, u9=\E?,
10052 # This isn't included in the basic capabilities because it is
10053 # typically unusable in combination with the full range of video
10054 # attributes, since the magic cookie attributes turn into ASCII
10055 # control characters, and the half-intensity ("protected") attribute
10056 # converts all affected characters to spaces.
10058 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
10061 # This uses half-intensity mode (<dim>) for standout (<smso>), and
10062 # exposes no other attributes (half-intensity is the only attribute
10063 # that does not generate a magic cookie.)
10065 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
10067 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
10070 # Full magic-cookie attribute support, with half-intensity reverse
10071 # video for standout. Note that we add a space in the <dim> sequence
10072 # to give a consistent magic-cookie count. Also note that <sgr> uses
10073 # backspacing (in the TVI-supported order) to apply all requested
10074 # attributes with only a single magic cookie.
10076 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
10078 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
10080 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
10081 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
10082 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
10084 # This uses the second page memory option to save & restore screen
10085 # contents. If your terminal is missing the option, this description
10086 # should still work, but that has not been tested.
10088 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
10089 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
10090 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
10092 # This simulates flashing by briefly toggling to the other page
10095 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
10096 bel=\EK$<100>\EK, use=tvi912b+2p,
10098 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
10100 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
10101 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
10102 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
10103 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
10104 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10105 kf8=^AG\r, kf9=^AH\r,
10107 # Combinations of the basic building blocks
10109 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
10110 use=tvi912b+2p, use=tvi912b-unk,
10112 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
10113 use=tvi912b+vb, use=tvi912b-unk,
10115 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
10116 use=tvi912b+printer, use=tvi912b-unk,
10118 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
10119 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
10121 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
10122 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
10124 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
10125 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
10127 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
10128 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
10130 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
10131 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
10133 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
10134 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
10136 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
10137 use=tvi912b+dim, use=tvi912b-unk,
10139 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
10140 use=tvi912b+mc, use=tvi912b-unk,
10142 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
10143 use=tvi920b+fn, use=tvi912b-unk,
10145 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
10146 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
10148 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
10149 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
10151 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
10152 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
10154 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
10155 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
10158 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
10159 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
10162 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
10163 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
10166 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
10167 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
10170 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
10171 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
10174 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
10175 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
10178 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
10179 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
10181 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
10182 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
10184 # Televideo 921 and variants
10185 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
10186 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
10187 # also added empty <acsc> to suppress tic warning -- esr)
10188 tvi921|televideo model 921 with sysline same as page & real vi function,
10189 OTbs, OTpt, am, hs, xenl, xhp,
10190 cols#80, lines#24, xmc#0,
10191 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10192 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10193 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10194 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
10195 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
10196 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
10197 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
10198 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
10199 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
10200 # without the beeper
10201 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
10202 # also added empty <acsc> to suppress tic warning -- esr)
10203 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
10205 cols#80, lines#24, xmc#0,
10206 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10207 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10208 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10209 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
10210 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10211 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
10212 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10213 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
10214 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
10215 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
10216 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
10217 dl1=\ER$<2*/>, il1=\EE$<2*/>,
10218 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
10219 kil1=\EE$<2*/>, use=tvi92B,
10221 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
10222 # in from a BSD termcap file because it looks like they do something the
10223 # old ones skip -- esr)
10224 tvi924|televideo tvi924,
10225 am, bw, hs, in, mir, msgr, xenl, xon,
10226 cols#80, it#8, lines#24, wsl#80, xmc#0,
10227 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
10228 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
10229 cub1=^H, cud1=^V, cuf1=^L,
10230 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
10231 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
10232 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
10233 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10234 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
10235 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10236 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
10237 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
10238 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
10239 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
10240 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
10241 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
10242 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
10245 # TVI925 DIP switches. In each of these, D = Down and U = Up,
10247 # Here are the settings for the external (baud) switches (S1):
10250 # 7 8 9 10 [Printer]
10251 # 1 2 3 4 [Main RS232]
10252 # -----------------------------------------------------
10271 # Settings for word length and stop-bits (S1)
10273 # Position Description
10275 # ---------------------------
10282 # S2 (external) settings
10284 # Position Up Dn Description
10285 # --------------------------------------------
10287 # X Duplex edit (transmit editing keys)
10288 # --------------------------------------------
10289 # 2 X 912/920 emulation
10291 # --------------------------------------------
10295 # --------------------------------------------
10299 # --------------------------------------------
10303 # --------------------------------------------
10307 # --------------------------------------------
10311 # --------------------------------------------
10312 # 6 X White on black display
10313 # X Black on white display
10314 # --------------------------------------------
10317 # --------------------------------------------
10320 # --------------------------------------------
10323 # --------------------------------------------
10326 # --------------------------------------------
10327 # 10 X CR/LF (Auto LF)
10330 # S3 (internal switch) settings:
10332 # Position Up Dn Description
10333 # --------------------------------------------
10336 # --------------------------------------------
10339 # --------------------------------------------
10342 # --------------------------------------------
10345 # --------------------------------------------
10348 # --------------------------------------------
10349 # 4 X Blinking block cursor
10351 # --------------------------------------------
10352 # 4 X Blinking underline cursor
10354 # --------------------------------------------
10355 # 4 X Steady block cursor
10357 # --------------------------------------------
10358 # 4 X Steady underline cursor
10360 # --------------------------------------------
10361 # 6 X Screen blanking timer (ON)
10362 # X Screen blanking timer (OFF)
10363 # --------------------------------------------
10364 # 7 X Page attributes
10365 # X Line attributes
10366 # --------------------------------------------
10367 # 8 X DCD disconnected
10369 # --------------------------------------------
10370 # 9 X DSR disconnected
10372 # --------------------------------------------
10373 # 10 X DTR Disconnected
10375 # --------------------------------------------
10377 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
10378 tvi925|televideo 925,
10379 OTbs, am, bw, hs, ul,
10380 cols#80, lines#24, xmc#1,
10381 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
10382 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10383 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
10384 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
10385 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
10386 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10387 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10388 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10389 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
10390 tsl=\Eh\Ef, use=adm+sgr,
10391 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
10392 # to avoid "magic cookie" standout glitch:
10393 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
10395 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
10397 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
10398 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
10399 # for additional capabilities,
10400 # The following tvi descriptions from B:pjphar and virus!mike
10401 # is for all 950s. It sets the following attributes:
10402 # full duplex (\EDF) write protect off (\E()
10403 # conversation mode (\EC) graphics mode off (\E%)
10404 # white on black (\Ed) auto page flip off (\Ew)
10405 # turn off status line (\Eg) clear status line (\Ef\r)
10406 # normal video (\E0) monitor mode off (\EX or \Eu)
10407 # edit mode (\Er) load blank char to space (\Ee\040)
10408 # line edit mode (\EO) enable buffer control (^O)
10409 # protect mode off (\E\047) duplex edit keys (\El)
10410 # program unshifted send key to send line all (\E016)
10411 # program shifted send key to send line unprotected (\E004)
10412 # set the following to nulls:
10413 # field delimiter (\Ex0\200\200)
10414 # line delimiter (\Ex1\200\200)
10415 # start-protected field delimiter (\Ex2\200\200)
10416 # end-protected field delimiter (\Ex3\200\200)
10417 # set end of text delimiter to carriage return/null (\Ex4\r\200)
10419 # TVI 950 Switch Setting Reference Charts
10423 # S1 1 2 3 4 5 6 7 8 9 10
10424 # +-----------------------+-----+-----+-----------------------+
10425 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
10426 # | |Bits |Bits | |
10427 # +------+-----------------------+-----+-----+-----------------------+
10428 # | Up | See | 7 | 2 | See |
10429 # +------+-----------------------+-----+-----+-----------------------+
10430 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
10431 # +------+-----------------------+-----+-----+-----------------------+
10434 # S2 1 2 3 4 5 6 7 8 9 10
10435 # +-----+-----+-----------------+-----+-----------+-----+-----+
10436 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
10437 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10438 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
10439 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10440 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
10441 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10445 # +-----------+-----+-----+-----+-----+-----------+
10446 # | Display | 1 | 2 | 3 | 4 | Baud |
10447 # +-----------+-----+-----+-----+-----+ |
10448 # | Printer | 7 | 8 | 9 | 10 | Rate |
10449 # +-----------+-----+-----+-----+-----+-----------+
10450 # | D | D | D | D | 9600 |
10451 # | U | D | D | D | 50 |
10452 # | D | U | D | D | 75 |
10453 # | U | U | D | D | 110 |
10454 # | D | D | U | D | 135 |
10455 # | U | D | U | D | 150 |
10456 # | D | U | U | D | 300 |
10457 # | U | U | U | D | 600 |
10458 # | D | D | D | U | 1200 |
10459 # | U | D | D | U | 1800 |
10460 # | D | U | D | U | 2400 |
10461 # | U | U | D | U | 3600 |
10462 # | D | D | U | U | 4800 |
10463 # | U | D | U | U | 7200 |
10464 # | D | U | U | U | 9600 |
10465 # | U | U | U | U | 19200 |
10466 # +-----+-----+-----+-----+-----------+
10469 # +-----+-----+-----+-----------+
10470 # | 3 | 4 | 5 | Parity |
10471 # +-----+-----+-----+-----------+
10472 # | X | X | D | None |
10473 # | D | D | U | Odd |
10474 # | D | U | U | Even |
10475 # | U | D | U | Mark |
10476 # | U | U | U | Space |
10477 # +-----+-----+-----+-----------+
10481 # +-----+-----+-----------------+
10482 # | 7 | 8 | Communication |
10483 # +-----+-----+-----------------+
10484 # | D | D | Half Duplex |
10485 # | D | U | Full Duplex |
10486 # | U | D | Block |
10487 # | U | U | Local |
10488 # +-----+-----+-----------------+
10490 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
10491 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
10492 # should be present and all tvi native modes use the same string for this.
10493 # Finally, note that BSD has cud1=^V. -- esr)
10495 # TVI 950 has 11 function-keys -TD
10496 tvi950|televideo 950,
10497 OTbs, am, hs, mir, msgr, xenl, xon,
10498 cols#80, it#8, lines#24, xmc#1,
10499 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
10500 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10501 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10502 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
10503 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
10505 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10506 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10508 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
10509 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
10510 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10511 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
10512 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
10513 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
10514 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
10515 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
10516 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
10518 # is for 950 with two pages adds the following:
10519 # set 48 line page (\E\\2)
10520 # place cursor at page 0, line 24, column 1 (\E-07 )
10521 # set local (no send) edit keys (\Ek)
10523 # two page 950 adds the following:
10524 # when entering ex, set 24 line page (\E\\1)
10525 # when exiting ex, reset 48 line page (\E\\2)
10526 # place cursor at 0,24,1 (\E-07 )
10527 # set duplex (send) edit keys (\El) when entering vi
10528 # set local (no send) edit keys (\Ek) when exiting vi
10530 tvi950-2p|televideo950 w/2 pages,
10531 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10532 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10534 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10535 smkx=\El, use=tvi950,
10537 # is for 950 with four pages adds the following:
10538 # set 96 line page (\E\\3)
10539 # place cursor at page 0, line 24, column 1 (\E-07 )
10541 # four page 950 adds the following:
10542 # when entering ex, set 24 line page (\E\\1)
10543 # when exiting ex, reset 96 line page (\E\\3)
10544 # place cursor at 0,24,1 (\E-07 )
10546 tvi950-4p|televideo950 w/4 pages,
10547 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10548 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10550 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10551 smkx=\El, use=tvi950,
10553 # <is2> for reverse video 950 changes the following:
10554 # set reverse video (\Ed)
10556 # set vb accordingly (\Ed ...delay... \Eb)
10558 tvi950-rv|televideo950 rev video,
10559 flash=\Ed$<200/>\Eb,
10560 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10561 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
10565 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
10566 tvi950-rv-2p|televideo950 rev video w/2 pages,
10567 flash=\Ed$<200/>\Eb,
10568 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10569 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10571 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10572 smkx=\El, use=tvi950,
10574 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
10575 tvi950-rv-4p|televideo950 rev video w/4 pages,
10576 flash=\Ed$<200/>\Eb,
10577 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10578 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10580 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10581 smkx=\El, use=tvi950,
10582 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
10583 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
10584 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
10585 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
10586 # the :ko: string had :cl: in it, which means that one of the original
10587 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
10588 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
10589 # ko implies -- esr)
10590 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
10592 tvi955|televideo 955,
10595 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
10596 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
10597 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
10598 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
10599 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
10600 rmam=\E[=7l, rmxon=^N,
10601 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
10603 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
10605 tvi955-w|955-w|televideo955 w/132 cols,
10607 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
10608 # use half-intensity as normal mode, full intensity as <bold>
10609 tvi955-hb|955-hb|televideo955 half-bright,
10610 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
10611 sgr0=\EG0\E[=5h, use=tvi955,
10612 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
10613 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
10614 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
10615 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
10616 # it does to the function keys. I deduced <rmam>/<smam>.
10617 # also added empty <acsc> to suppress tic warning, -- esr)
10618 tvi970|televideo 970,
10619 OTbs, OTpt, am, da, db, mir, msgr,
10620 cols#80, it#8, lines#24,
10621 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
10622 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
10623 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
10624 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
10625 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
10626 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
10627 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10628 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
10629 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
10630 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
10631 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
10632 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
10633 smul=\E[4m, vpa=\E[%i%p1%dd,
10634 tvi970-vb|televideo 970 with visual bell,
10635 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
10637 tvi970-2p|televideo 970 with using 2 pages of memory,
10638 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
10640 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
10641 # per line (rather than 40), Esc K chooses the normal character set. Not sure
10642 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
10643 # <smul> strings are klutzy, but at least use no screen space.
10644 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
10645 # its absence means <smam>=\Ev isn't safe to use. -- esr)
10646 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
10647 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
10648 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
10649 tvipt|televideo personal terminal,
10652 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
10653 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
10654 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
10655 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
10656 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
10657 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
10658 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
10659 tvi9065|televideo 9065,
10660 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
10661 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
10663 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
10664 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
10665 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
10666 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
10667 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
10668 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
10669 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
10670 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10671 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
10672 il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1,
10674 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
10675 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
10676 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10677 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
10678 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10679 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
10680 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
10681 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
10682 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
10683 pfx=\E|%p1%{48}%+%c1%p2%s\031,
10684 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
10685 rep=\E[%p2%db%p1%c, rev=\EG4,
10686 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
10687 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
10688 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
10689 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
10690 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
10691 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
10692 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
10693 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
10694 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
10696 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
10697 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
10699 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
10700 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
10701 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
10705 # In September 1993, Visual Technology of Westboro, Massachusetts,
10706 # merged with White Pine Software of Nashua, New Hampshire.
10708 # White Pine Software may be contacted at +1 603/886-9050.
10709 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
10712 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
10713 # Recently I hacked together the following termcap for Visual
10714 # Technology's Visual 50 terminal. It's a slight modification of
10715 # the vt52 termcap.
10716 # It's intended to run when the Visual 50 is in vt52 emulation mode
10717 # (I know what you're thinking; if it's emulating a vt52, then why
10718 # another termcap? Well, it turns out that the Visual 50 can handle
10719 # <dl1> and db(?) among other things, which the vt52 can't)
10720 # The termcap works OK for the most part. The only problem is on
10721 # character inserts. The whole line gets painfully redrawn for each
10722 # character typed. Any suggestions?
10723 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
10724 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
10725 # disguise; <kf7>-<kf9> are really l1-l3.
10727 OTbs, OTpt, am, da, db, msgr,
10728 cols#80, it#8, lines#24,
10729 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
10730 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10731 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
10732 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10733 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10734 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10735 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10736 # this one was BSD & SCO's vi50
10737 vi50adm|visual 50 in adm3a mode,
10739 cols#80, it#8, lines#24,
10740 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10741 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10742 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
10743 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10744 rmso=\ET, smso=\EU,
10745 # From: Jeff Siegal <jbs@quiotix.com>
10747 OTbs, am, mir, msgr,
10748 cols#80, it#8, lines#24,
10749 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10750 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10751 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10752 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10753 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10754 smir=\Ea, smso=\EU,
10756 # Visual 200 from BRL
10757 # The following switch settings are assumed for normal operation:
10758 # FULL_DUPLEX SCROLL CR
10759 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10760 # Other switches may be set for operator convenience or communication
10762 # Character insertion is kludged in order to get around the "beep" misfeature.
10763 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10764 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10765 # and <dl1> strings, but we seem to get along fine without them.
10767 OTbs, OTpt, am, mir, msgr,
10768 OTkn#10, cols#80, it#8, lines#24,
10769 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
10770 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
10771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
10772 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
10773 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
10774 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10775 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
10776 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10777 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
10778 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
10779 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
10780 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
10781 # The older Visuals didn't come with function keys. This entry uses
10782 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10783 # If your version of vi doesn't support function keys you may want
10785 vi200-f|visual 200 no function keys,
10786 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10787 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10788 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10790 vi200-rv|visual 200 reverse video,
10791 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10793 # the function keys are programmable but we don't reprogram them to their
10794 # default values with <is2> because programming them is very verbose. maybe
10795 # an initialization file should be made for the 300 and they could be stuck
10797 # (vi300: added <rmam>/<smam> based on init string -- esr)
10798 vi300|visual 300 ansi x3.64,
10801 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
10802 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10803 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10805 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10806 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10807 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10808 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10809 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10810 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10811 smso=\E[1m, smul=\E[4m,
10812 # some of the vi300s have older firmware that has the command
10813 # sequence for setting editing extent reversed.
10814 vi300-old|visual 300 with old firmware (set edit extent reversed),
10815 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10817 # Visual 500 prototype entry from University of Wisconsin.
10818 # The best place to look for the escape sequences is page A1-1 of the
10819 # Visual 500 manual. The initialization sequence given here may be
10820 # overkill, but it does leave out some of the initializations which can
10821 # be done with the menus in set-up mode.
10822 # The :xp: line below is so that emacs can understand the padding requirements
10823 # of this slow terminal. :xp: is 10 time the padding factor.
10824 # (vi500: removed unknown :xp#4: termcap;
10825 # also added empty <acsc> to suppress tic warning -- esr)
10828 cols#80, it#8, lines#33,
10829 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
10830 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10831 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10832 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10833 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10835 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10836 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10837 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
10838 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10840 # The visual 550 is a visual 300 with tektronix graphics,
10841 # and with 33 lines. clear screen is modified here to
10842 # also clear the graphics.
10843 vi550|visual 550 ansi x3.64,
10845 clear=\030\E[H\E[2J, use=vi300,
10847 vi603|visual603|visual 603,
10849 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10850 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10851 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10852 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10853 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10854 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10855 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10856 tsl=\EP2~, use=vt100+4bsd,
10861 # 3471 North First Street
10862 # San Jose, CA 95134
10863 # Vox: (408)-473-1200
10864 # Fax: (408) 473-1222
10865 # Web: http://www.wyse.com
10867 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10868 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10869 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10870 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10873 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10874 # They now own the Qume and Amdek brands, too. So these are the people to
10875 # talk with about all Link, Qume, and Amdek terminals.
10877 # These entries include a few small fixes.
10878 # I canceled the bel capacities in the vb entries.
10879 # I made two trivial syntax fixes in the wyse30 entry.
10880 # I made some entries relative to adm+sgr.
10883 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10885 # Although the Wyse 30 can support more than one attribute
10886 # it requires magic cookies to do so. Many applications do not
10887 # function well with magic cookies. The following terminfo uses
10888 # the protect mode to support one attribute (dim) without cookies.
10889 # If more than one attribute is needed then the wy30-mc terminfo
10892 wy30|wyse30|Wyse 30,
10893 am, bw, hs, mc5i, mir, msgr, xon,
10894 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10895 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10896 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
10897 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10898 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10899 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10900 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10901 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10902 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
10903 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10904 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10905 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10906 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10907 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10908 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10909 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10910 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10911 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10912 smso=\E`7\E), tbc=\E0, tsl=\EF,
10914 # This terminal description uses the non-hidden attribute mode
10915 # (with magic cookie).
10917 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10918 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10921 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10922 rmcup=\EG0, rmso=\EG0,
10923 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10924 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10925 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10926 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10927 smso=\EG4, use=wy30, use=adm+sgr,
10928 # The mandatory pause used by <flash> does not work with
10929 # older versions of terminfo. If you see this effect then
10930 # unset xon and delete the / from the delay.
10931 # i.e. change $<100/> to $<100>
10932 wy30-vb|wyse30-vb|wyse 30 visible bell,
10935 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10936 # Normal) without magic cookies by using the protect mode.
10937 # The following description uses this feature, but when more
10938 # than one attribute is put on the screen at once, all attributes
10939 # will be changed to be the same as the last attribute given.
10940 # The Wyse 50 can support more attributes when used with magic
10941 # cookies. The wy50-mc terminal description uses magic cookies
10942 # to correctly handle multiple attributes on a screen.
10944 wy50|wyse50|Wyse 50,
10945 am, bw, hs, mc5i, mir, msgr, xon,
10946 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10947 acsc=a;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, cbt=\EI,
10948 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
10949 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10950 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10951 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10952 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10953 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10954 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10955 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10956 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10957 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10958 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10959 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10960 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
10961 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10962 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10963 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10964 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10966 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10967 smso=\E`6\E), tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r,
10968 kF11=^Aj\r, kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r,
10969 kF16=^Ao\r, kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r,
10970 kF6=^Ae\r, kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r,
10972 # This terminal description uses the non-hidden attribute mode
10973 # (with magic cookie).
10975 # The mandatory pause used by flash does not work with some
10976 # older versions of terminfo. If you see this effect then
10977 # unset <xon> and delete the / from the delay.
10978 # i.e. change $<100/> to $<100>
10979 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10980 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10983 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10984 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10985 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10986 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10987 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10988 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10989 smso=\EGt, use=wy50, use=adm+sgr,
10990 wy50-vb|wyse50-vb|wyse 50 visible bell,
10992 wy50-w|wyse50-w|wyse 50 132-column,
10993 cols#132, lw#7, nlab#16, wsl#97,
10994 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10996 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
11000 # The Wyse 350 is a Wyse 50 with color.
11001 # Unfortunately this means that it has magic cookies.
11002 # The color attributes are designed to overlap the reverse, dim and
11003 # underline attributes. This is nice for monochrome applications
11004 # because you can make underline stuff green (or any other color)
11005 # but for true color applications it's not so hot because you cannot
11006 # mix color with reverse, dim or underline.
11007 # To further complicate things one of the attributes must be
11008 # black (either the foreground or the background). In reverse video
11009 # the background changes color with black letters. In normal video
11010 # the foreground changes colors on a black background.
11011 # This terminfo uses some of the more advanced features of curses
11012 # to display both color and blink. In the final analysis I am not
11013 # sure that the wy350 runs better with this terminfo than it does
11014 # with the wy50 terminfo (with user adjusted colors).
11016 # The mandatory pause used by flash does not work with
11017 # older versions of terminfo. If you see this effect then
11018 # unset xon and delete the / from the delay.
11019 # i.e. change $<100/> to $<100>
11021 # Bug: The <op> capability resets attributes.
11022 wy350|wyse350|Wyse 350,
11023 am, bw, hs, mc5i, mir, xon,
11024 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
11026 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
11027 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
11028 cub1=^H, cud1=\n, cuf1=^L,
11029 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
11030 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
11031 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11032 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
11033 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
11034 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
11035 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
11036 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
11037 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
11038 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
11039 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
11040 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
11041 pfx=\Ez%p1%{63}%+%c%p2%s\177,
11042 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
11043 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
11044 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
11045 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
11046 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
11048 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
11049 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
11050 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
11052 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
11053 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
11054 wy350-vb|wyse350-vb|wyse 350 visible bell,
11056 wy350-w|wyse350-w|wyse 350 132-column,
11057 cols#132, lw#7, nlab#16, wsl#97,
11058 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
11060 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
11063 # This terminfo description is untested.
11064 # The wyse100 emulates an adm31, so the adm31 entry should work.
11068 cols#80, lines#24, xmc#1,
11069 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11071 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
11072 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
11073 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
11074 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
11075 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
11077 # The Wyse 120/150 has most of the features of the Wyse 60.
11078 # This terminal does not need padding up to 9600 baud!
11079 # <msgr> should be set but the clear screen fails when in
11080 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11083 wy120|wyse120|wy150|wyse150|Wyse 120/150,
11084 am, bw, hs, km, mc5i, mir, msgr, xon,
11085 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11086 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11087 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11088 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11089 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11090 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11091 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
11092 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11093 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11095 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11096 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11097 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11098 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11099 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11100 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11101 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11102 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
11103 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11104 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11105 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11106 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
11107 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11108 rs3=\EwG\Ee($<100>,
11109 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11110 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11111 %{64}%|%;%?%p7%t%{1}%|%;%c,
11112 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11113 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11114 tbc=\E0, tsl=\EF, use=adm+sgr,
11116 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
11117 cols#132, lw#7, nlab#16, wsl#97,
11118 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11119 rs2=\E`;$<70>, use=wy120,
11121 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
11122 lh@, lines#25, lw@, nlab@,
11123 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
11125 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
11126 lh@, lines#25, lw@, nlab@,
11127 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
11129 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
11132 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
11135 # The Wyse 60 is like the Wyse 50 but with more padding.
11136 # The reset strings are slow and the pad times very depending
11137 # on other parameters such as font loading. I have tried
11138 # to follow the following outline:
11140 # <rs1> -> set personality
11141 # <rs2> -> set number of columns
11142 # <rs3> -> set number of lines
11143 # <is1> -> select the proper font
11144 # <is2> -> do the initialization
11145 # <is3> -> set up display memory (2 pages)
11147 # The Wyse 60's that have vt100 emulation are slower than the
11148 # older Wyse 60's. This change happened mid-1987.
11149 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
11151 # The meta key is only half right. This terminal will return the
11152 # high order bit set when you hit CTRL-function_key
11154 # It may be useful to assign two function keys with the
11155 # values \E=(\s look at old data in page 1
11156 # \E=W, look at bottom of page 1
11157 # where \s is a space ( ).
11160 # The Wyse 60 runs faster when the XON/XOFF
11161 # handshake is turned off.
11163 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
11164 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11165 wy60|wyse60|Wyse 60,
11166 am, bw, hs, km, mc5i, mir, msgr,
11167 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
11168 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11169 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
11170 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11171 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11172 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
11173 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
11174 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
11175 ip=$<3>, is1=\EcB0\EcC1,
11176 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11178 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11179 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11180 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11181 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11182 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11183 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11184 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11185 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
11186 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11187 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11188 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
11189 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
11190 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
11191 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
11192 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11193 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11194 %{64}%|%;%?%p7%t%{1}%|%;%c,
11195 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11196 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11197 tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
11198 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
11199 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
11200 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
11202 wy60-w|wyse60-w|wyse 60 132-column,
11203 cols#132, lw#7, nlab#16, wsl#97,
11204 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
11205 rs2=\EeF$<150>\E`;$<150>, use=wy60,
11207 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
11208 lh@, lines#25, lw@, nlab@,
11209 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
11210 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
11211 lh@, lines#25, lw@, nlab@,
11212 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
11214 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
11216 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
11217 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
11218 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
11219 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
11220 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
11221 cols#132, lw#7, nlab#16, wsl#97,
11222 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11223 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
11224 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
11226 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
11227 lh@, lines#43, lw@, nlab@,
11228 pln@, rs3=\Ee+$<150>, use=wy60-42,
11229 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
11230 lh@, lines#43, lw@, nlab@,
11231 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
11233 wy60-vb|wyse60-vb|Wyse 60 visible bell,
11235 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
11238 # The Wyse-99GT looks at lot like the Wyse 60 except that it
11239 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
11240 # setup parameter controls the number of lines on the screen.
11241 # For the Wyse 99GT the "lines" setup parameter controls the
11242 # number of lines in a page. The screen can display 25 lines max.
11243 # The Wyse-99GT also has personalities for the VT220 and
11244 # Tektronix 4014. But this has no bearing on the native mode.
11246 # (msgr) should be set but the clear screen fails when in
11247 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11248 # then set msgr, else use msgr@.
11250 # u0 -> enter Tektronix mode
11251 # u1 -> exit Tektronix mode
11253 wy99gt|wyse99gt|Wyse 99gt,
11255 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
11256 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
11257 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
11258 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
11259 u0=\E~>\E8, u1=\E[42h, use=wy60,
11261 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
11262 cols#132, lw#7, nlab#16, wsl#97,
11263 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11264 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
11267 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
11268 lh@, lines#25, lw@, nlab@,
11269 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
11271 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
11272 lh@, lines#25, lw@, nlab@,
11273 pln@, rs2=\E`;$<150>, use=wy99gt-w,
11275 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
11278 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
11279 bel@, use=wy99gt-w,
11281 # Can't set tabs! Other bugs (ANSI mode only):
11282 # - can't redefine function keys (anyway, key redefinition in ANSI mode
11283 # is too much complex to be described);
11284 # - meta key can't be described (the terminal forgets it when reset);
11285 # The xon-xoff handshaking can't be disabled while in ansi personality, so
11286 # emacs can't work at speed greater than 9600 baud. No padding is needed at
11288 # dch1 has been commented out because it causes annoying glittering when
11289 # vi deletes one character at the beginning of a line with tabs in it.
11290 # dch makes sysgen(1M) have a horrible behaviour when deleting
11291 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
11292 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
11293 # not, so smir and rmir are commented out as well.
11294 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11295 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
11296 am, km, mc5i, mir, msgr, xenl,
11297 cols#80, it#8, lines#25, vt#3,
11298 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
11299 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11300 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
11301 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
11302 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
11303 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
11304 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
11305 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
11306 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
11307 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
11308 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
11309 il1=\E[L, ind=\n$<1>, invis=\E[8m,
11310 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
11311 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
11312 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11313 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
11314 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
11315 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
11316 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
11317 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
11318 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
11319 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11320 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
11321 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
11322 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
11325 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
11326 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
11327 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
11328 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
11330 # This is the american terminal. Here tabs work fine.
11331 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11332 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
11333 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
11335 # This terminal (firmware version 02) has a lot of bugs:
11336 # - can't set tabs;
11337 # - other bugs in ANSI modes (see above).
11338 # This description disables handshaking when using cup. This is because
11339 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
11340 # cannot be used at speeds greater than 9600 baud, because at greater
11341 # speeds handshaking is needed even for character sending. If you use
11342 # DTR handshaking, you can use even greater speeds.
11343 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11344 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
11345 am, bw, hs, km, mc5i, mir, msgr, xon,
11346 cols#80, it#8, lines#25, wsl#46,
11347 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
11348 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
11349 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
11350 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11351 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
11352 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
11353 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
11354 ind=\n, invis=\EG3,
11355 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
11356 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
11358 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
11359 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
11360 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
11361 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
11362 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
11363 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11364 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
11365 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
11366 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
11367 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
11368 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
11369 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
11370 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
11371 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
11373 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
11374 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
11376 # This is the american terminal. Here tabs work.
11377 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11378 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
11379 hts=\E1, tbc=\E0, use=wy99f,
11382 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
11383 # The reset strings are slow and the pad times very depending
11384 # on other parameters such as font loading. I have tried
11385 # to follow the following outline:
11387 # <rs1> -> set personality
11388 # <rs2> -> set number of columns
11389 # <rs3> -> set number of lines
11390 # <is1> -> select the proper font
11391 # <is2> -> do the initialization
11392 # <is3> -> set up display memory (2 pages)
11394 # The display memory may be used for either text or graphics.
11395 # When "Display Memory = Shared" the terminal will have more pages
11396 # but garbage may be left on the screen when you switch from
11397 # graphics to text. If "Display Memory = Unshared" then the
11398 # text area will be only one page long.
11400 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
11401 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11402 wy160|wyse160|Wyse 160,
11403 am, bw, hs, km, mc5i, mir, msgr,
11404 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
11405 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11406 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
11407 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
11409 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
11410 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
11411 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
11412 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11414 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11415 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11416 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11417 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11418 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11419 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11420 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11421 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
11422 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11423 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11424 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
11425 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
11426 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
11427 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
11428 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11429 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11430 %{64}%|%;%?%p7%t%{1}%|%;%c,
11431 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11432 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11433 tbc=\E0, tsl=\EF, use=adm+sgr,
11435 wy160-w|wyse160-w|wyse 160 132-column,
11436 cols#132, lw#7, nlab#16, wsl#90,
11437 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
11438 rs2=\EeF$<150>\E`;$<150>, use=wy160,
11440 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
11441 lh@, lines#25, lw@, nlab@,
11442 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
11443 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
11444 lh@, lines#25, lw@, nlab@,
11445 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
11447 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
11449 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
11450 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
11451 rs3=\Ee*$<150>, use=wy160,
11452 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
11453 cols#132, lw#7, nlab#16, wsl#90,
11454 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
11455 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
11457 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
11458 lh@, lines#43, lw@, nlab@,
11459 pln@, rs3=\Ee+$<150>, use=wy160-42,
11460 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
11461 lh@, lines#43, lw@, nlab@,
11462 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
11464 wy160-vb|wyse160-vb|Wyse 160 visible bell,
11466 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
11469 # The Wyse 75 is a vt100 lookalike without advanced video.
11471 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
11472 # Underline) without magic cookies. The following description
11473 # uses this capability, but when more than one attribute is
11474 # put on the screen at once, all attributes will be changed
11475 # to be the same as the last attribute given.
11476 # The Wyse 75 can support more attributes when used with magic
11477 # cookies. The wy75-mc terminal description uses magic cookies
11478 # to correctly handle multiple attributes on a screen.
11480 wy75|wyse75|wyse 75,
11481 am, hs, mc5i, mir, msgr, xenl, xon,
11482 cols#80, lines#24, ma#1, pb#1201, wsl#78,
11483 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11484 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
11485 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
11486 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
11487 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11488 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
11489 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
11490 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
11491 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
11492 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
11493 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11494 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11495 ind=\n$<2>, ip=$<1>,
11496 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
11497 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
11498 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
11499 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11500 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11501 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
11502 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
11503 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11504 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
11505 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
11506 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
11507 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
11508 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
11510 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
11511 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
11513 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11514 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
11515 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
11517 # This terminal description uses the non-hidden attribute mode
11518 # (with magic cookie).
11520 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
11523 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
11524 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
11525 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
11526 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
11528 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
11530 wy75-vb|wyse75-vb|wyse 75 with visible bell,
11533 wy75-w|wyse75-w|wyse 75 in 132 column mode,
11535 rs2=\E[35h\E[?3h$<80>, use=wy75,
11536 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
11540 # Wyse 85 emulating a vt220 7 bit mode.
11541 # 24 line screen with status line.
11543 # The vt220 mode permits more function keys but it wipes out
11544 # the escape key. I strongly recommend that <f11> be set to
11546 # The terminal may have to be set for 8 data bits and 2 stop
11547 # bits for the arrow keys to work.
11548 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
11549 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
11550 # <dch> leave trash on the screen when used without XON/XOFF.
11552 wy85|wyse85|wyse 85,
11553 am, hs, mc5i, mir, msgr, xenl, xon,
11554 cols#80, it#8, lines#24, wsl#80,
11555 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11556 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11557 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11558 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11559 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11560 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11561 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11562 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11563 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11564 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11565 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11566 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11567 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11568 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11569 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11570 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
11571 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
11572 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
11573 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
11574 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
11575 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
11576 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11577 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11578 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11579 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11580 rs3=\E[?5l, sc=\E7,
11581 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11582 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11583 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11584 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11585 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
11587 # Wyse 85 with visual bell.
11588 wy85-vb|wyse85-vb|wyse 85 with visible bell,
11589 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
11591 # Wyse 85 in 132-column mode.
11592 wy85-w|wyse85-w|wyse 85 in 132-column mode,
11594 rs2=\E[35h$<70/>\E[?3h, use=wy85,
11596 # Wyse 85 in 132-column mode with visual bell.
11597 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
11600 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
11601 # This copes with an apparent firmware bug in the wy85. He writes:
11602 # "What I did was change leave the terminal cursor keys set to Normal
11603 # (instead of application), and change \E[ to \233 for all the keys in
11604 # terminfo. At one point, I found some reference indicating that this
11605 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
11606 # me), but I can't find that and the server under my bookmark to "Wyse
11607 # Technical" isn't responding. So there's the question of whether the wy85
11608 # terminfo should reflect the manufacturer's intended behaviour of the terminal
11610 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
11611 am, hs, mc5i, mir, msgr, xenl, xon,
11612 cols#80, it#8, lines#24, wsl#80,
11613 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11614 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11615 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11616 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11617 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11618 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11619 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11620 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11621 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11622 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11623 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11624 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11625 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11626 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11627 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
11628 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
11629 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
11630 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
11631 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
11632 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
11633 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
11634 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
11635 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
11636 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11637 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11638 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11639 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11640 rs3=\E[?5l, sc=\E7,
11641 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11642 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
11643 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11644 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11645 tsl=\E[40h\E7\E[25;%i%p1%dH,
11647 # Wyse 185 emulating a vt320 7 bit mode.
11649 # This terminal always displays 25 lines. These lines may be used
11650 # as 24 data lines and a terminal status line (top or bottom) or
11651 # 25 data lines. The 48 and 50 line modes change the page size
11652 # and not the number of lines on the screen.
11654 # The Compose Character key can be used as a meta key if changed
11657 wy185|wyse185|wyse 185,
11658 am, hs, km, mc5i, mir, msgr, xenl, xon,
11659 cols#80, it#8, lines#24, wsl#80,
11660 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11661 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11662 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11663 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11664 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11665 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11666 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
11667 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11668 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
11669 el=\E[K, el1=\E[1K, enacs=\E)0,
11670 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
11671 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
11672 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
11673 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11674 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
11675 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11676 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
11677 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11678 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
11679 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
11680 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11681 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
11682 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
11683 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11684 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
11685 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11686 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11687 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11688 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11689 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11690 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11691 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11692 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
11695 # Wyse 185 with 24 data lines and top status (terminal status)
11696 wy185-24|wyse185-24|wyse 185 with 24 data lines,
11698 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11701 # Wyse 185 with visual bell.
11702 wy185-vb|wyse185-vb|wyse 185+flash,
11705 # Wyse 185 in 132-column mode.
11706 wy185-w|wyse185-w|wyse 185 in 132-column mode,
11708 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11709 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
11711 # Wyse 185 in 132-column mode with visual bell.
11712 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
11715 # wy325 terminfo entries
11716 # Done by Joe H. Davis 3-9-92
11718 # lines 25 columns 80
11720 wy325|wyse325|Wyse epc,
11721 am, bw, hs, mc5i, mir,
11722 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11723 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11724 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11725 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11726 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11727 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11728 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11729 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11730 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
11732 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11733 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11734 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11735 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11736 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11737 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
11738 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11739 mc0=\EP, mc4=^T, mc5=\Ed#,
11740 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11741 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11742 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11743 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11744 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11745 rs3=\EwG\Ee($<100>,
11746 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11747 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11748 %{64}%|%;%?%p7%t%{1}%|%;%c,
11749 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11750 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11751 tsl=\EF, use=adm+sgr,
11754 # lines 24 columns 80 vb
11756 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11760 # lines 24 columns 132
11762 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11763 cols#132, lw#7, nlab#16, wsl#97,
11764 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11765 rs2=\E`;$<70>, use=wy325,
11767 # lines 25 columns 80
11769 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11770 lh@, lines#25, lw@, nlab@,
11771 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11773 # lines 25 columns 132
11775 wy325-25w|wyse325-25w|wy325 132 columns,
11776 lh@, lines#25, lw@, nlab@,
11777 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11779 # lines 25 columns 132 vb
11781 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11785 # lines 42 columns 80
11787 wy325-42|wyse325-42|wyse-325 42 lines,
11788 lh@, lines#42, lw@, nlab@,
11789 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11791 # lines 42 columns 132
11793 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11794 lh@, lines#42, lw@, nlab@,
11795 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11797 # lines 42 columns 132 vb
11799 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11802 # lines 43 columns 80
11804 wy325-43|wyse325-43|wyse-325 43 lines,
11805 lh@, lines#43, lw@, nlab@,
11808 # lines 43 columns 132
11810 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11811 lh@, lines#43, lw@, nlab@,
11812 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11814 # lines 43 columns 132 vb
11816 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11819 # Wyse 370 -- 24 line screen with status line.
11821 # The terminal may have to be set for 8 data bits and 2 stop
11822 # bits for the arrow keys to work.
11824 # If you change keyboards the terminal will send different
11825 # escape sequences.
11826 # The following definition is for the basic terminal without
11829 # <u0> -> enter Tektronix 4010/4014 mode
11830 # <u1> -> exit Tektronix 4010/4014 mode
11831 # <u2> -> enter ASCII mode (from any ANSI mode)
11832 # <u3> -> exit ASCII mode (goto native ANSI mode)
11833 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11834 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11836 # Bug: The <op> capability resets attributes.
11837 wy370-nk|wyse 370 without function keys,
11838 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11839 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11840 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11841 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11842 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11843 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11844 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11845 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11846 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11847 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11848 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11849 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11850 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11851 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11852 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11854 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11855 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11856 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11857 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11859 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11860 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11861 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11863 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11864 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11865 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11866 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11867 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11868 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11869 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11870 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11871 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11872 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11873 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11874 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11875 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11876 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11878 # Function key set for the ASCII (wy-50 compatible) keyboard
11879 # This is the default 370.
11881 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11882 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11883 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11884 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11885 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11886 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11887 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11888 knp=\E[U, kpp=\E[V, use=wy370-nk,
11890 # Function key set for the VT-320 (and wy85) compatible keyboard
11892 wy370-105k|Wyse 370 with 105 key keyboard,
11893 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11894 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11895 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11896 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11897 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11898 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11899 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11900 use=wy370-nk, use=vt220+keypad,
11902 # Function key set for the PC compatible keyboard
11904 wy370-EPC|Wyse 370 with 102 key keyboard,
11905 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11906 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11907 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11908 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11909 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11911 # Wyse 370 with visual bell.
11912 wy370-vb|Wyse 370 with visible bell,
11915 # Wyse 370 in 132-column mode.
11916 wy370-w|Wyse 370 in 132-column mode,
11918 rs2=\E[35h\E[?3h$<70>, use=wy370,
11920 # Wyse 370 in 132-column mode with visual bell.
11921 wy370-wvb|Wyse 370 with visible bell 132-columns,
11922 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11923 wy370-rv|Wyse 370 reverse video,
11924 rs3=\E[32h\E[?5h, use=wy370,
11926 # Wyse 99gt Tektronix 4010/4014 emulator,
11928 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11931 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11932 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11933 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11934 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11935 %{31}%&%{64}%+%c\037,
11937 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11940 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11942 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
11944 # Wyse 160 Tektronix 4010/4014 emulator,
11946 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11947 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11948 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11949 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11950 %{31}%&%{64}%+%c\037,
11951 home=^]8`g @\037, use=wy99gt-tek,
11953 # Wyse 370 Tektronix 4010/4014 emulator,
11955 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11958 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11959 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11960 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11961 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11963 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11966 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11968 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
11969 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11971 # Vendor-supplied Wyse entries end here.
11974 #TITLE: TERMINFO ENTRY WY520
11976 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11977 # BBS with the addition of more function keys and special keys.
11979 # rs1 -> set personality
11980 # rs2 -> set number of columns
11981 # rs3 -> set number of lines
11982 # is1 -> select the proper font
11983 # is2 -> do the initialization
11984 # is3 -> If this string is empty then rs3 gets sent.
11986 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11987 # - The BS key is programmed to generate BS in smcup since
11988 # is2 doesn't seem to work.
11989 # - Remove and shift/Remove: delete a character
11990 # - Insert : enter insert mode
11991 # - Find : delete to end of file
11992 # - Select : clear a line
11993 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11995 # - Bottom status line (host writable line) is used.
11996 # - smkx,rmkx are removed because this would put the numeric
11997 # keypad in Dec application mode which doesn't seem to work
11998 # with SCO applications.
12000 wy520|wyse520|wyse 520,
12001 am, hs, km, mc5i, mir, xenl, xon,
12002 cols#80, it#8, lines#24, wsl#80,
12003 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12004 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12005 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
12006 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
12007 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12008 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12009 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
12010 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
12011 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
12012 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
12013 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
12014 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
12015 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
12016 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12017 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
12018 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
12019 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
12020 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
12021 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
12022 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
12023 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
12024 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12025 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
12026 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
12027 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
12028 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
12029 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
12030 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12031 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
12032 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12033 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
12034 vpa=\E[%i%p1%dd, use=vt220+keypad,
12036 # Wyse 520 with 24 data lines and status (terminal status)
12037 wy520-24|wyse520-24|wyse 520 with 24 data lines,
12039 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12042 # Wyse 520 with visual bell.
12043 wy520-vb|wyse520-vb|wyse 520 with visible bell,
12044 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
12046 # Wyse 520 in 132-column mode.
12047 wy520-w|wyse520-w|wyse 520 in 132-column mode,
12049 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12050 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
12052 # Wyse 520 in 132-column mode with visual bell.
12053 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
12054 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
12057 # Wyse 520 emulating a vt420 7 bit mode.
12058 # The DEL key is programmed to generate BS in is2.
12059 # With EPC keyboard.
12060 # - 'End' key will clear till end of line on EPC keyboard
12061 # - Shift/End : ignored.
12062 # - Insert : enter insert mode.
12063 # - Delete : delete a character (have to change interrupt character
12064 # to CTRL-C: stty intr '^c') for it to work since the
12065 # Delete key sends 7FH.
12066 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
12067 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
12068 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
12071 # Wyse 520 with 24 data lines and status (terminal status)
12072 # with EPC keyboard.
12073 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
12075 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
12078 # Wyse 520 with visual bell.
12079 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
12080 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
12082 # Wyse 520 in 132-column mode.
12083 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
12085 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
12086 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
12088 # Wyse 520 in 132-column mode with visual bell.
12089 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
12090 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
12092 # Wyse 520 in 80-column, 36 lines
12093 wy520-36|wyse520-36|wyse 520 with 36 data lines,
12096 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
12099 # Wyse 520 in 80-column, 48 lines
12100 wy520-48|wyse520-48|wyse 520 with 48 data lines,
12103 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
12106 # Wyse 520 in 132-column, 36 lines
12107 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
12110 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
12113 # Wyse 520 in 132-column, 48 lines
12114 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
12117 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
12121 # Wyse 520 in 80-column, 36 lines with EPC keyboard
12122 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
12125 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
12128 # Wyse 520 in 80-column, 48 lines with EPC keyboard
12129 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
12132 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
12135 # Wyse 520 in 132-column, 36 lines with EPC keyboard
12136 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
12139 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
12142 # Wyse 520 in 132-column, 48 lines with EPC keyboard
12143 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
12146 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
12149 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
12150 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
12151 # file and we don't know what <hts> is -- esr)
12152 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
12154 cols#80, it#8, lines#24,
12155 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
12156 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
12157 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
12158 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
12159 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
12160 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
12163 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
12164 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
12165 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12166 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
12169 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
12170 wy100q|Wyse 100 for Quotron,
12172 cols#80, lines#24, xmc#1,
12173 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
12174 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12175 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
12176 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
12177 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
12179 #### Kermit terminal emulations
12181 # Obsolete Kermit versions may be listed in the section describing obsolete
12182 # non-ANSI terminal emulators later in the file.
12185 # KERMIT standard all versions.
12186 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
12187 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12188 # From: greg small <gts@populi.berkeley.edu> 9-25-84
12189 kermit|standard kermit,
12192 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12193 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
12194 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
12195 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
12196 kermit-am|standard kermit plus auto-margin,
12198 is2=K1 Standard Kermit plus Automatic Margins\n,
12200 # IBMPC Kermit 1.2.
12201 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
12202 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
12204 # From: greg small <gts@populi.berkeley.edu> 8-30-84
12205 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
12208 clear=\EH\EJ, ed@, el@,
12209 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
12210 # IBMPC Kermit 1.20
12211 # Cannot use line 25, now acts funny like ansi special scrolling region.
12212 # Initialization must escape from that region by cursor position to line 24.
12213 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
12214 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
12215 # From: greg small <gts@populi.berkeley.edu> 12-19-84
12216 pckermit120|UCB IBMPC Kermit 1.20,
12218 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
12220 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
12222 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
12223 # MS-DOS Kermit 2.27 for the IBMPC
12224 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
12225 # Cannot use line 25, now acts funny like ansi special scrolling region.
12226 # Initialization must escape from that region by cursor position to line 24.
12227 # Does not use am: because autowrap is lost when kermit dropped and restarted.
12228 # Reverse video for standout like H19.
12229 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12230 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12231 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
12233 cols#80, it#8, lines#24,
12234 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12235 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12236 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
12237 home=\EH, ht=^I, il1=\EL,
12238 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
12239 \sIBMPC\s3-17-85\n,
12240 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
12241 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
12242 # MS-DOS Kermit 2.27 with automatic margins
12243 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12244 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
12246 cvvis=\EO\Eq\EG\EvK5,
12247 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
12248 \smargins\s3-17-85\n,
12250 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
12251 # Automatic margins now default. Use ansi <sgr> for highlights.
12252 # Define function keys.
12253 # (msk22714: removed obsolete ":kn#10:" -- esr)
12254 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12255 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
12257 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
12258 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
12259 \sIBM\sPC\s3-17-85\n,
12260 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
12261 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12262 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
12263 # This was designed for a VT320 emulator, but it is probably a good start
12264 # at support for the VT320 itself.
12265 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
12266 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
12267 vt320-k3|MS-Kermit 3.00's vt320 emulation,
12268 am, eslok, hs, km, mir, msgr, xenl,
12269 cols#80, it#8, lines#49, pb#9600, vt#3,
12270 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12271 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12272 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
12273 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12274 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12275 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12276 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12277 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
12278 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
12280 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12281 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12282 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
12283 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
12284 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12285 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
12286 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
12287 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
12288 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12289 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
12290 \E[4i\E[?4i\E[m\E[r\E[2$~,
12291 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
12292 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12293 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
12294 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
12295 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
12296 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
12297 vt320-k311|dec vt320 series as defined by kermit 3.11,
12298 am, eslok, hs, mir, msgr, xenl, xon,
12299 cols#80, it#8, lines#24, vt#3,
12300 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12301 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12302 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
12303 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12304 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12305 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12306 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12307 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
12308 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
12309 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
12311 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
12312 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12313 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12314 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
12315 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
12316 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
12317 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
12318 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
12319 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
12320 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
12322 ######## NON-ANSI TERMINAL EMULATIONS
12327 # These entries attempt to describe Avatar, a terminal emulation used with
12328 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
12329 # capabilities, but with cheaper (shorter) control sequences. Messy design,
12330 # excessively dependent on PC idiosyncrasies, but apparently rather popular
12331 # in the BBS world.
12333 # No color support. Avatar doesn't fit either of the Tektronix or HP color
12334 # models that terminfo knows about. An Avatar color attribute is the
12335 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
12337 # I wrote these entries while looking at the Avatar spec. I don't have
12338 # the facilities to test them. Let me know if they work, or don't.
12340 # Avatar escapes not used by these entries (because maybe you're smarter
12341 # and more motivated than I am and can figure out how to wrap terminfo
12342 # around some of them, and because they are weird enough to be funny):
12344 # ^L -- clear window/reset current attribute to default
12345 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
12347 # bit: 6 5 4 3 2 1 0
12349 # +---+---+ | +---+---+
12351 # | | foreground color
12352 # | foreground intensity
12355 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
12356 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
12357 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
12358 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
12359 # (^V^L and ^V^M set the current attribute as a side-effect.)
12360 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
12361 # in the pattern, <c> the number of times the pattern
12362 # should be repeated. If either value is 0, no-op.
12363 # The pattern can contain Avatar console codes,
12364 # including other ^V ^Y patterns.
12366 # ^V^O -- clockwise mode on; turn print direction right each time you
12367 # hit a window edge (yes, really). Turned off by CR
12369 # ^V^Q%c -- query the driver
12370 # ^V^R -- driver reset
12371 # ^V^S -- Sound tone (PC-specific)
12372 # ^V^T -- change highlight at current cursor position to %c
12373 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
12374 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
12377 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12378 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
12379 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
12380 # which is the only method that will actually work for multiple highlights.)
12382 # Update by TD - 2004: half of this was inconsistent. Found documentation
12383 # and repaired most of the damage. sgr0 is probably incorrect, but the
12384 # available documentation gives no clues for a workable string.
12385 avatar0|avatar terminal emulator level 0,
12387 cols#80, it#8, lines#25,
12388 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
12389 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
12390 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
12392 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
12393 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
12394 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
12395 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
12397 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12398 avatar0+|avatar terminal emulator level 0+,
12399 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
12400 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12401 avatar|avatar1|avatar terminal emulator level 1,
12402 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
12403 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
12407 # RBComm is a lean and mean terminal emulator written by the Interrupt List
12408 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
12409 # '90s), especially in the BBS world, and still has some loyal users due to
12410 # its very small memory footprint and to a cute macro language.
12411 rbcomm|IBM PC with RBcomm and EMACS keybindings,
12412 am, bw, mir, msgr, xenl,
12413 cols#80, it#8, lines#25,
12414 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12415 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12416 cub1=^H, cud1=^C, cuf1=^B,
12417 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
12418 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
12419 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
12420 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
12421 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
12422 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
12423 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
12424 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
12425 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
12426 rbcomm-nam|IBM PC with RBcomm without autowrap,
12428 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12429 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
12430 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12431 rbcomm-w|IBM PC with RBcomm in 132 column mode,
12433 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12434 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
12435 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12437 ######## LCD DISPLAYS
12440 #### Matrix Orbital
12441 # from: Eric Z. Ayers (eric@ale.org)
12443 # Matrix Orbital 20x4 LCD display
12444 # Command Character is 0xFE (decimal 254, octal 376)
12446 # On this device, cursor addressability isn't possible. The LCD expects:
12447 # 0xfe G <col> <row>
12448 # for cup: %p1 == row and %p2 is column
12451 # cup=\376G%p2%c%p1%c
12452 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
12453 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
12455 # Alas, there is no cursor upline capability on this display.
12457 # These entries add some 'sanity stuff' to the clear function. That is, it
12458 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
12459 # and turns off the cursor blinking and stuff like that.
12461 # NOTE: calling 'beep' turns on the backlight (bell)
12462 # NOTE: calling 'flash' turns it on and back off (visual bell)
12464 MtxOrb|Generic Matrix Orbital LCD display,
12465 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
12466 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
12467 flash=\376B\001$<200>\376F, home=\376H,
12468 MtxOrb204|20x4 Matrix Orbital LCD display,
12469 cols#20, lines#4, use=MtxOrb,
12470 MtxOrb162|16x2 Matrix Orbital LCD display,
12471 cols#16, lines#2, use=MtxOrb,
12474 ######## OLDER TERMINAL TYPES
12476 # This section is devoted to older commercial terminal brands that are now
12477 # discontinued, but known to be still in use or represented by emulations.
12480 #### AT&T (att, tty)
12482 # This section also includes Teletype-branded VDTs.
12484 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
12485 # Boundless Technologies); for details, see the header comment on the ADDS
12488 # These are AT&T's official terminfo entries. All-caps aliases have been
12491 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
12492 am, eo, mir, msgr, xon,
12493 cols#80, it#8, lines#24,
12494 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
12495 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12496 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12497 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12498 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12499 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12500 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12501 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
12502 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
12503 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
12504 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
12505 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12506 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
12508 att2350|AT&T 2350 Video Information Terminal 80 column mode,
12509 mc0@, mc4@, mc5@, use=att2300,
12511 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
12512 # Seems upward compatible with vt100, plus ins/del line/char.
12513 # On sgr, the protection parameter is ignored.
12514 # No check is made to make sure that only 3 parameters are output.
12515 # standout= reverse + half-intensity = 3 | 5.
12516 # bold= reverse + underline = 2 | 3.
12517 # note that half-bright blinking doesn't look different from normal blinking.
12518 # NOTE:you must program the function keys first, label second!
12519 # (att4410: a BSD entry has been seen with the following capabilities:
12520 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
12521 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
12522 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
12523 am, hs, mir, msgr, xon,
12524 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12525 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
12527 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
12528 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
12529 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
12530 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
12531 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
12532 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
12533 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
12534 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
12535 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
12536 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
12537 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
12539 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12540 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
12541 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
12542 ll=\E[24H, nel=\r\n,
12543 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
12545 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12546 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12548 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12549 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12550 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12551 tsl=\E7\E[25;%p1%{1}%+%dH,
12553 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
12555 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
12557 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
12559 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
12562 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
12564 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
12566 # 5410 in terms of a vt100
12567 # (v5410: added <rmam>/<smam> based on init string -- esr)
12568 v5410|att5410 in terms of a vt100,
12569 am, mir, msgr, xon,
12570 cols#80, it#8, lines#24, vt#3,
12571 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12572 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
12573 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12574 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
12575 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
12576 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
12577 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
12578 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12579 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
12580 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
12581 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12583 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
12584 %;m%?%p9%t\016%e\017%;$<2>,
12585 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
12586 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
12590 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
12591 # even! the 5420 has three modes: scroll, window or page mode
12592 # this terminfo should work in scroll or window mode, but doesn't
12593 # take advantage of any of the differences between them.
12595 # Has memory below (2 lines!)
12596 # 3 pages of memory (plus some spare)
12597 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
12598 # <hpa>, <hts> would work for these, but these work in both scroll and window
12599 # mode... Unset insert character so insert mode works
12600 # <is1> sets 80 column mode,
12601 # <is2> escape sequence:
12602 # 1) turn off all fonts
12603 # 2) function keys off, keyboard lock off, control display off,
12604 # insert mode off, erasure mode off,
12605 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
12606 # 4) reset origin mode
12607 # 5) set line wraparound
12608 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
12610 # 8) program ENTER to transmit ^J,
12611 # We use \212 to program the ^J because a bare ^J will get translated by
12612 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
12614 # <is3> set screen color to black,
12615 # No representation in terminfo for the delete word key: kdw1=\Ed
12616 # Key capabilities assume the power-up send sequence...
12617 # This <rmcup> is not strictly necessary, but it helps maximize
12618 # memory usefulness: <rmcup=\Ez>,
12619 # Alternate sgr0: <sgr0=\E[m\EW^O>,
12620 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
12621 # smkx programs the SYS PF keys to send a set sequence.
12622 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
12623 # This string causes them to send the strings <kf1>-<kf8>
12624 # when pressed in SYS PF mode.
12625 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
12626 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
12627 OTbs, db, mir, xon,
12628 lh#2, lm#78, lw#8, nlab#8, wsl#55,
12629 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
12630 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
12631 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
12632 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
12633 flash=\E[?5h$<200>\E[?5l, home=\E[x,
12634 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
12635 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
12636 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12637 \E[4i\Ex\E[21;1j\212,
12638 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
12639 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
12640 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12641 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12642 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12643 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
12644 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
12645 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
12646 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
12647 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
12648 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
12649 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12650 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12651 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
12652 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
12653 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12656 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
12657 cols#132, lm#54, wsl#97,
12658 is1=\E[?3h$<100>, use=att4415,
12660 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
12661 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
12663 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
12664 cols#132, lm#54, wsl#97,
12665 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
12668 # Note that this mode permits programming USER PF KEYS and labels
12669 # However, when you program user pf labels you have to reselect
12670 # user pf keys to make them appear!
12671 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
12672 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
12673 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12675 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
12677 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
12678 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12681 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
12682 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12685 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
12686 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12689 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
12690 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12693 att5420_2|AT&T 5420 model 2 80 cols,
12694 am, db, hs, mir, msgr, xon,
12695 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12696 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12697 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
12698 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12699 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
12700 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
12701 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12702 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
12703 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12704 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
12705 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12706 indn=\E[%p1%dE, invis=\E[8m,
12707 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
12708 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12710 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
12711 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
12712 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
12713 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
12714 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12715 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12716 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
12717 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
12718 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
12720 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
12721 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
12722 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12724 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12725 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
12726 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
12727 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12728 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12729 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
12731 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
12732 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12736 att4418|att5418|AT&T 5418 80 cols,
12739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12740 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
12741 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12742 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12743 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12744 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12745 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
12746 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12747 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12748 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12749 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12750 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12751 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12752 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12753 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12754 att4418-w|att5418-w|AT&T 5418 132 cols,
12756 is1=\E[?3h, use=att5418,
12758 att4420|tty4420|teletype 4420,
12759 OTbs, da, db, eo, msgr, ul, xon,
12760 cols#80, lines#24, lm#72,
12761 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12762 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12763 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12764 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12765 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12766 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12767 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12768 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12770 # The following is a terminfo entry for the Teletype 4424
12771 # asynchronous keyboard-display terminal. It supports
12772 # the vi editor. The terminal must be set up as follows,
12774 # HIGHLIGHT DEFINITION 3-TONE
12775 # DISPLAY FUNCTION GROUP III
12777 # The second entry below provides limited (a la adm3a)
12778 # operation under GROUP II.
12780 # This must be used with DISPLAY FUNCTION GROUP I or III
12781 # and HIGHLIGHT DEFINITION 3-TONE
12782 # The terminal has either bold or blink, depending on options
12784 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12785 att4424|tty4424|teletype 4424,
12788 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12789 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
12790 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12791 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12792 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12793 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12794 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12795 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
12796 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12797 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12798 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12800 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
12801 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
12802 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12805 att4424-1|tty4424-1|teletype 4424 in display function group I,
12806 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12809 # This entry is not one of AT&T's official ones, it was translated from the
12810 # 4.4BSD termcap file. The highlight strings are different from att4424.
12811 # I have no idea why this is -- older firmware version, maybe?
12812 # The following two lines are the comment originally attached to the entry:
12813 # This entry appears to avoid the top line - I have no idea why.
12814 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12815 att4424m|tty4424m|teletype 4424M,
12817 cols#80, it#8, lines#23,
12818 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12819 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12820 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
12821 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12822 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12823 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
12824 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12826 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12827 # is quite similar, except for some minor differences. No page
12828 # mode, for example, so all of the <cup> sequences used above have
12829 # to change back to what's being used for the 5410. Many of the
12830 # option settings have changed their numbering as well.
12832 # This has been tested on a preliminary model.
12834 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12835 att5425|tty5425|att4425|AT&T 4425/5425,
12836 am, da, db, hs, mir, msgr, xenl, xon,
12837 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12838 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12839 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12840 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
12841 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12842 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12843 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12844 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12845 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12846 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12847 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12848 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12849 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
12850 invis=\E[8m, is1=\E<\E[?3l$<100>,
12851 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12852 \E[4i\Ex\E[25;1j\212,
12853 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12854 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12855 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12856 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12857 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12858 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12860 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12861 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12862 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12863 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12864 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12865 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12866 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12867 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12868 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12869 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12870 vpa=\E[%p1%{1}%+%dd,
12872 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12873 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12875 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12876 cols#132, lm#54, wsl#97,
12877 is1=\E[?3h$<100>, use=tty5425,
12879 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12880 # I also added <rmam>/<smam> -- esr)
12881 att4426|tty4426|teletype 4426S,
12883 cols#80, lines#24, lm#48,
12884 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12885 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12886 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12887 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12888 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12889 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12890 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12891 il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
12892 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12893 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12894 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12895 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12896 nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12897 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12898 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12899 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12902 # Terminfo entry for the AT&T 510 A Personal Terminal
12903 # Function keys 9 - 16 are available only after the
12904 # screen labeled (soft keys/action blocks) are labeled. Function key
12905 # 9 corresponds to the leftmost touch target on the screen,
12906 # function key 16 corresponds to the rightmost.
12908 # This entry is based on one done by Ernie Rice at Summit, NJ and
12909 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12910 att510a|bct510a|AT&T 510A Personal Terminal,
12911 am, mir, msgr, xenl, xon,
12912 cols#80, lh#2, lines#24, lw#7, nlab#8,
12913 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12914 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12915 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
12916 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12917 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12918 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12919 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12920 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12921 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
12922 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12923 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12924 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12925 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12926 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12927 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12928 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12929 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12930 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12931 %|%t;7%;m%?%p9%t\016%e\017%;,
12932 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12933 smul=\E[4m, tbc=\E[3g,
12935 # Terminfo entry for the AT&T 510 D Personal Terminal
12936 # Function keys 9 through 16 are accessed by bringing up the
12938 # Function key 9 corresponds to the leftmost touch target on the screen,
12939 # function key 16 corresponds to the rightmost.
12941 # There are problems with soft key labeling. These are due to
12942 # strangenesses in the native terminal that are impossible to
12943 # describe in a terminfo.
12944 att510d|bct510d|AT&T 510D Personal Terminal,
12945 am, da, db, mir, msgr, xenl, xon,
12946 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12947 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12948 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12949 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
12950 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12951 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12952 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12953 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12954 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12955 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12956 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
12957 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12958 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12959 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12960 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12961 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12962 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12963 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12964 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12965 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12966 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12967 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12968 rs2=\E[5;0|, sc=\E7,
12969 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12970 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12971 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12972 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12973 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12975 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12976 att500|att513|AT&T 513 using page mode,
12977 am, chts, mir, msgr, xenl, xon,
12978 cols#80, lh#2, lines#24, lw#8, nlab#8,
12979 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12980 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12981 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
12982 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12983 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12984 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12985 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12986 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12987 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12988 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12989 indn=\E[%p1%dE, invis=\E[8m,
12990 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12991 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12992 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12993 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12994 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12995 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12996 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12997 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12998 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12999 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
13000 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13001 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
13002 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
13003 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13004 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13005 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
13006 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
13007 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
13009 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13011 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
13013 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
13014 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
13015 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
13016 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
13017 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
13019 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
13020 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
13021 rs2=\E[5;0|, sc=\E7,
13022 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13023 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13024 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
13025 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
13026 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
13029 # printer must be set to EMUL ANSI to accept ESC codes
13030 # <cuu1> stops at top margin
13031 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
13032 # and alt font ascii,wrap on,tabs cleared
13033 # <is2> disables newline on LF,Emphasized off
13034 # The <u0> capability sets form length
13035 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
13037 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
13038 orhi#100, orl#12, orvi#72,
13039 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
13040 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
13041 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
13044 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
13045 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
13046 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
13047 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
13048 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
13049 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
13051 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
13052 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
13053 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
13054 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
13056 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
13057 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
13058 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
13059 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
13060 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
13062 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
13063 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
13064 u0=\E[%p1%dt, vpa=\E[%p1%dd,
13066 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
13067 # The following SET-UP modes are assumed for normal operation:
13068 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
13069 # Other SET-UP modes may be set for operator convenience or communication
13070 # requirements. This termcap description is for the Resident Terminal Mode.
13071 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13072 # The BRL entry also said: UNSAFE :ll=\E[70H:
13073 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
13075 cols#88, it#8, lines#70, vt#3,
13076 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
13077 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
13078 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13079 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
13080 il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
13081 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
13082 kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
13085 # 5620 terminfo (2.0 or later ROMS with char attributes)
13086 # The following SET-UP modes are assumed for normal operation:
13087 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
13088 # Other SET-UP modes may be set for operator convenience or communication
13089 # requirements. This termcap description is for Resident Terminal Mode. No
13090 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13091 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
13092 # Be aware that older versions of the dmd have a firmware bug that affects
13093 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
13094 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
13095 # also has <ll>=\E[70H commented out and marked unsafe.
13096 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
13097 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
13098 OTbs, am, msgr, npc, xon,
13099 cols#88, it#8, lines#70,
13100 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
13101 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13102 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
13103 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
13104 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
13105 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13106 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
13107 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
13108 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
13109 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
13110 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
13111 lines#24, use=att5620,
13112 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
13113 lines#34, use=att5620,
13114 # 5620 layer running the "S" system's downloaded graphics handler:
13115 att5620-s|tty5620-s|layer|vitty|5620 S layer,
13117 cols#80, it#8, lines#72,
13118 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
13119 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
13120 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
13121 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
13124 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
13126 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
13127 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
13128 att605|AT&T 605 80 column 102key keyboard,
13130 cols#80, lines#24, lw#8, nlab#8, wsl#80,
13131 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13132 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13133 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
13134 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
13135 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13136 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13137 il1=\E[L, ind=\n, invis=\E[8m,
13138 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
13139 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
13140 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13141 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
13142 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
13143 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
13144 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
13145 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
13146 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
13147 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
13148 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
13149 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
13150 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
13151 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
13152 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13153 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13154 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13155 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
13156 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
13157 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13158 tsl=\E7\E[25;%i%p1%dx,
13159 att605-pc|ATT 605 in pc term mode,
13160 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
13162 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
13163 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
13164 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
13165 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
13166 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
13167 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
13168 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
13169 xoffc=g, xonc=e, use=att605,
13170 att605-w|AT&T 605-w 132 column 102 key keyboard,
13172 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
13173 # (att610: I added <rmam>/<smam> based on the init string. I also
13174 # added <indn> and <rin> because the BSD file says the att615s have them,
13175 # and the 615 is like a 610 with a big keyboard, and most of their other
13176 # smart terminals support the same sequence -- esr)
13177 att610|AT&T 610; 80 column; 98key keyboard,
13178 am, eslok, hs, mir, msgr, xenl, xon,
13179 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13180 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13181 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13182 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13183 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13184 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13185 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13186 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13187 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13188 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13189 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13190 indn=\E[%p1%dS, invis=\E[8m,
13191 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
13192 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13193 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13194 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13195 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13196 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13197 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
13199 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13200 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13201 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
13202 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
13203 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13204 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13205 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13206 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
13207 att610-w|AT&T 610; 132 column; 98key keyboard,
13209 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13212 att610-103k|AT&T 610; 80 column; 103key keyboard,
13213 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13214 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13215 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13216 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13217 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13218 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13219 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13220 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
13221 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
13222 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
13223 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
13224 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
13225 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
13226 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
13228 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13230 att615|AT&T 615; 80 column; 98key keyboard,
13231 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13232 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13233 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13234 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13235 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13236 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13237 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
13238 att615-w|AT&T 615; 132 column; 98key keyboard,
13239 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13240 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13241 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13242 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13243 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13244 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13245 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
13246 att615-103k|AT&T 615; 80 column; 103key keyboard,
13247 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
13248 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
13249 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
13250 # (att620: I added <rmam>/<smam> based on the init string and
13251 # <rin>/<indn> from a BSD termcap -- esr)
13252 att620|AT&T 620; 80 column; 98key keyboard,
13253 am, eslok, hs, mir, msgr, xenl, xon,
13254 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13255 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13256 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13257 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13258 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13259 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13260 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13261 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13262 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13263 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13264 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13265 indn=\E[%p1%dS, invis=\E[8m,
13266 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
13267 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
13268 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13269 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13270 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13271 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
13272 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
13273 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
13274 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
13275 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
13276 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
13277 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13278 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
13279 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13280 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13281 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13282 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
13283 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
13284 rs2=\Ec\E[?3l, sc=\E7,
13285 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13286 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
13287 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
13288 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13289 tsl=\E7\E[25;%i%p1%dx,
13290 att620-w|AT&T 620; 132 column; 98key keyboard,
13292 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13294 att620-103k|AT&T 620; 80 column; 103key keyboard,
13295 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13296 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13297 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13298 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13299 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13300 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13301 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13302 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
13303 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
13304 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
13305 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
13306 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
13307 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13308 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13309 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
13310 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
13312 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
13314 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13317 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
13318 # The following SETUP modes are assumed for normal operation:
13319 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
13320 # Font_Size=Large Non-Layers_Window_Cols=80
13321 # Non-Layers_Window_Rows=60
13322 # Other SETUP modes may be set for operator convenience or communication
13323 # requirements. Some capabilities assume a printer attached to the Aux EIA
13324 # port. This termcap description is for the Fixed Non-Layers Window. No
13325 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13326 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
13327 att630|AT&T 630 windowing terminal,
13328 OTbs, am, da, db, mir, msgr, npc, xon,
13329 cols#80, it#8, lines#60, lm#0,
13330 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
13331 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13332 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13333 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13334 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13335 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13336 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
13337 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13338 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
13339 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
13340 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
13341 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
13342 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
13343 mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
13344 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
13345 rmul=\E[m, rs2=\Ec, sc=\E7,
13346 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
13348 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13349 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
13350 lines#24, use=att630,
13352 # This is the att700 entry for 700 native emulation of the AT&T 700
13353 # terminal. Comments are relative to changes from the 605V2 entry and
13354 # att730 on which the entry is based. Comments show the terminfo
13355 # capability name, termcap name, and description.
13357 # Here is what's going onm in the init string:
13358 # ESC [ 50;4| set 700 native mode (really is 605)
13359 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
13360 # ESC [ 53;0| set GenFlow to Xon/Xoff
13361 # ESC [ 8 ;0| set CR on NL
13362 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
13363 # ESC [ ? 4 l jump scroll
13364 # ESC [ ? 5 l/h video: normal (l); reverse (h)
13365 # ESC [ ?13 l Labels on
13366 # ESC [ ?15 l parity check = no
13367 # ESC [ 13 l monitor mode off
13368 # ESC [ 20 l LF on NL (not CRLF on NL)
13369 # ESC [ ? 7 h autowrap on
13370 # ESC [ 12 h local echo off
13371 # ESC ( B GO = ASCII
13372 # ESC ) 0 G1 = Special Char & Line Drawing
13373 # ESC [ ? 31 l Set 7 bit controls
13375 # Note: Most terminals, especially the 600 family use Reverse Video for
13376 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
13377 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
13378 # standout mode with \E[m (all normal attributes). The 730 entry simply
13379 # exits reverse video which would leave other current attributes intact. It
13380 # was assumed the 730 entry to be more correct so rmso has changed. The
13381 # 605V2 has no sequences to turn individual attributes off, thus its setting
13382 # and the rmso/smso settings from the 730.
13384 # Note: For the same reason as above in rmso I changed exit under-score mode
13385 # to specifically turn off underscore, rather than return to all normal
13388 # Note: The following pkey_xmit is taken from the 605V2 which contained the
13389 # capability as pfxl. It was changed here to pfx since pfxl
13390 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
13391 # allows strings to be parameters and label values must be programmed as
13392 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
13393 # and strings to be parameters. The 605V2 pfx entry should be examined later
13394 # in this regard. For reference the 730 pfxl entry is shown here for comparison
13396 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
13397 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13400 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13403 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13405 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
13409 # modular 10 pin Connector
13410 # Left side Right side
13411 # Pin 1 2 3 4 5 6 7 8 9 10
13413 # Key (notch) at bottom
13425 # The manual is 189 pages and is loaded with details about the escape codes,
13426 # etc..... Available from AT&T CIC 800-432-6600...
13427 # ask for Document number 999-300-660..
13429 att700|AT&T 700 24x80 column display w/102key keyboard,
13430 am, eslok, hs, mir, msgr, xenl, xon,
13431 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13432 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13433 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13434 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13435 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13436 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13437 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13438 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13439 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13440 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
13441 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13442 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
13443 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
13444 \E(B\E)0\E[?31l\E[0m\017,
13445 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
13446 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13447 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
13448 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
13449 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
13450 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
13451 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
13452 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
13453 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
13454 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13455 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
13456 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13457 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
13458 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13459 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
13460 \s\s\s\s\s\s%;%p2%s,
13461 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13462 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13463 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
13464 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
13465 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13466 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13467 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
13468 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
13469 tsl=\E7\E[99;%i%p1%dx,
13471 # This entry was modified 3/13/90 by JWE.
13472 # fixes include additions of <enacs>, correcting <rep>, and modification
13473 # of <kHOM>. (See comments below)
13474 # att730 has status line of 80 chars
13475 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
13476 # the <kf25> and up keys are used for shifted system Fkeys
13477 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
13478 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
13479 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
13480 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
13481 # 102, 102+1, or 122 key keyboards
13483 # (att730: I added <rmam>/<smam> based on the init string -- esr)
13484 att730|AT&T 730 windowing terminal,
13485 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
13486 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
13487 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13488 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13489 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13490 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13491 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13492 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13493 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13494 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13495 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13496 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
13497 ind=\ED, invis=\E[8m,
13498 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
13499 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13500 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13501 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13502 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
13503 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
13504 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
13505 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
13506 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
13507 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
13508 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
13509 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
13510 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13511 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
13512 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13513 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
13514 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13515 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
13516 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13517 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13518 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
13519 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
13520 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13521 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13522 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13523 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
13524 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
13525 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
13526 lines#41, use=att730,
13527 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
13528 lines#24, use=att730,
13529 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
13530 flash=\E[?5l$<200>\E[?5h,
13531 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
13532 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
13533 lines#41, use=att730r,
13534 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
13535 lines#24, use=att730r,
13537 # The following represents the screen layout along with the associated
13538 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
13539 # not appear on the screen but are shown to reference the bezel buttons.
13540 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
13541 # position relative to the screen.
13545 # +----------------------------------------------------------------+
13547 # XXXX | kf0 kf24 | XXXX
13550 # XXXX | kf1 kf23 | XXXX
13553 # XXXX | kf2 kf22 | XXXX
13556 # XXXX | kf3 kf21 | XXXX
13559 # XXXX | kf4 kf20 | XXXX
13562 # XXXX | kf5 kf19 | XXXX
13565 # XXXX | kf6 kf18 | XXXX
13571 # +----------------------------------------------------------------+
13573 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
13575 # Note: XXXX represents the screen buttons
13581 # The character string sent by key 'kf26' may be user programmable
13582 # to send either \E[16s, or \E[26s.
13583 # The character string sent by key 'krfr' may be user programmable
13584 # to send either \E[17s, or \E[27s.
13586 # Depression of the "CMD" key sends \E! (kcmd)
13587 # Depression of the "MAIL" key sends \E[26s (kf26)
13588 # "REDRAW" same as "REFRESH" (krfr)
13590 # "kf" functions adds carriage return to output string if terminal is in
13593 # The following are functions not covered in the table above:
13595 # Set keyboard character (SKC): \EPn1;Pn2w
13596 # Pn1= 0 Back Space key
13598 # Pn2= Program char (hex)
13600 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
13601 # Pn1= Window number (1-39)
13602 # Pn2-Pn5= Y;X;Y;X coordinates
13604 # Screen Selection (SSL): \E[Pnu
13605 # Pn= Window number
13607 # Set Terminal Modes (SM): \E[Pnh
13608 # Pn= 3 Graphics mode
13609 # Pn= > Cursor blink
13610 # Pn= < Enter new line mode
13611 # Pn= = Enter reverse insert/replace mode
13612 # Pn= ? Enter no scroll mode
13614 # Reset Terminal Mode (RM): \E[Pnl
13615 # Pn= 3 Exit graphics mode
13616 # Pn= > Exit cursor blink
13617 # Pn= < Exit new line mode
13618 # Pn= = Exit reverse insert/replace mode
13619 # Pn= ? Exit no scroll mode
13621 # Screen Status Report (SSR): \E[Pnp
13622 # Pn= 0 Request current window number
13623 # Pn= 1 Request current window dimensions
13625 # Device Status Report (DSR): \E[6n Request cursor position
13627 # Call Status Report (CSR): \E[Pnv
13628 # Pn= 0 Call failed
13629 # Pn= 1 Call successful
13631 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
13632 # Pn1= Button number to be loaded
13633 # Pn2= Character count of "string"
13634 # Pn3= Key mode being loaded:
13638 # String= Text string (15 chars max)
13640 # Screen Number Report (SNR): \E[Pnp
13641 # Pn= Screen number
13643 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
13644 # Pn1= Number of rows available in window
13645 # Pn2= Number of columns available in window
13647 # Cursor Position Report (CPR): \E[Pn1;Pn2R
13648 # Pn1= "Y" Position of cursor
13649 # Pn2= "X" Position of cursor
13651 # Request Answer Back (RAB): \E[c
13653 # Answer Back Response (ABR): \E[?;*;30;VSV
13654 # *= 0 No printer available
13655 # *= 2 Printer available
13656 # V= Software version number
13657 # SV= Software sub version number
13658 # (printer-available field not documented in v1)
13660 # Screen Alignment Aid: \En
13662 # Bell (lower pitch): \E[x
13664 # Dial Phone Number: \EPdstring\
13665 # string= Phone number to be dialed
13667 # Set Phone Labels: \EPpstring\
13668 # string= Label for phone buttons
13670 # Set Clock: \EPchour;minute;second\
13672 # Position Clock: \EPsY;X\
13673 # Y= "Y" coordinate
13674 # X= "X" coordinate
13676 # Delete Clock: \Epr\
13678 # Programming The Function Buttons: \EPfPn;string\
13679 # Pn= Button number (00-06, 18-24)
13680 # (kf00-kf06, kf18-kf24)
13681 # string= Text to sent on button depression
13683 # The following in version 2 only:
13685 # Request For Local Directory Data: \EPp12;\
13687 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
13689 # Request for Local Directory Data in print format: \EPp13;\
13691 # Enable 'Prt on Line' mode: \022 (DC2)
13693 # Disable 'Prt on Line' mode: \024 (DC4)
13697 # The following Terminfo entry describes functions which are supported by
13698 # the AT&T 5430/pt505 terminal software version 2 and later.
13699 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
13701 cols#80, it#8, lines#24,
13702 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13703 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
13704 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
13705 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13706 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13707 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13708 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
13709 il=\E[%p1%dL, il1=\E[L, ind=\n,
13710 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
13711 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13712 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
13713 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
13714 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
13715 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
13716 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13717 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
13718 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
13719 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
13721 # The following Terminfo entry describes functions which are supported by
13722 # the AT&T 5430/pt505 terminal software version 1.
13723 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
13725 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
13726 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
13727 lines#22, use=att505,
13729 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
13730 # This cut mark helps make life less painful for people running ncurses tic
13731 # on machines with relatively little RAM. The file can be broken in half here
13732 # cleanly and compiled in sections -- no `use' references cross this cut
13736 #### Ampex (Dialogue)
13738 # Yes, these are the same people who are better-known for making audio- and
13739 # videotape. I'm told they are located in Redwood City, CA.
13742 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13743 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13744 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13746 cols#80, it#8, lines#24,
13747 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
13748 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13749 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13750 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
13751 smso=\Ej, smul=\El, tbc=\E3,
13752 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13753 ampex175|ampex d175,
13756 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13757 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13758 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
13759 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
13760 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13761 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13762 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13763 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13764 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13765 # mode), this key can be used as the erase key; I find I like this. Because
13766 # some people and some systems may not, there is another termcap ("ampex175")
13767 # that suppresses this little eccentricity by omitting the relevant capability.
13768 ampex175-b|ampex d175 using left arrow for erase,
13769 kbs=^_, use=ampex175,
13770 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13771 # (ampex210: removed obsolete ":kn#10:" -- esr)
13772 ampex210|a210|ampex a210,
13773 OTbs, am, hs, xenl,
13774 cols#80, it#8, lines#24, xmc#1,
13775 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13776 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13777 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13778 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13779 if=/usr/share/tabset/std, il1=\EE, invis@,
13780 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13781 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13782 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13783 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13784 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13785 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13786 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13787 # and moved the padding to be *after* the caps -- esr)
13788 ampex219|ampex-219|amp219|Ampex with Automargins,
13790 cols#80, it#8, lines#24,
13791 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13792 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
13793 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13794 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13795 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13796 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
13797 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13798 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13799 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13800 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13801 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13802 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13803 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13804 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13805 cols#132, lines#24,
13806 bel=^G, cr=\r, cud1=\n, ind=\n,
13807 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13808 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13809 ampex232|ampex-232|Ampex Model 232,
13811 cols#80, lines#24, xmc#1,
13812 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13813 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13814 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13815 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13816 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13817 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13818 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13819 kf9=^AI\r, khome=^^, use=adm+sgr,
13820 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13821 ampex232w|Ampex Model 232 / 132 columns,
13822 cols#132, lines#24,
13823 is2=\E\034Eg\El, use=ampex232,
13825 #### Ann Arbor (aa)
13827 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13828 # numbers of function keys. At least some used monitors in portrait mode,
13829 # allowing up to 76-character screen heights! They were reachable at:
13831 # Ann Arbor Terminals
13832 # 6175 Jackson Road
13833 # Ann Arbor, MI 48103
13836 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13837 # can't be found on the Web; I fear they're long dead. R.I.P.
13841 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13842 # Highly modified 6/22 by Mike O'Brien.
13843 # split out into several for the various screen sizes by dave-yost@rand
13844 # Modifications made 3/82 by Mark Horton
13845 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13846 # status line moved to top of screen, <flash> removed 5/82
13847 # Some unknown person at SCO then hacked the init strings to make them more
13850 # assumes the following setup:
13851 # A menu: 0000 1010 0001 0000
13852 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13853 # C menu: 56 66 0 0 9600 0110 1100
13854 # D menu: 0110 1001 1 0
13856 # Briefly, the settings are for the following modes:
13857 # (values are for bit set/clear with * indicating our preference
13858 # and the value used to test these termcaps)
13859 # Note that many of these settings are irrelevant to the terminfo
13860 # and are just set to the default mode of the terminal as shipped
13863 # A menu: 0000 1010 0001 0000
13864 # Block/underline cursor*
13865 # blinking/nonblinking cursor*
13866 # key click/no key click*
13867 # bell/no bell at column 72*
13869 # key pad is cursor control*/key pad is numeric
13870 # return and line feed/return for <cr> key *
13871 # repeat after .5 sec*/no repeat
13872 # repeat at 25/15 chars per sec. *
13874 # hold data until pause pressed/process data unless pause pressed*
13875 # slow scroll/no slow scroll*
13876 # Hold in area/don't hold in area*
13877 # functions keys have default*/function keys disabled on powerup
13879 # show/don't show position of cursor during page transmit*
13884 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13885 # Baud rate (9600*)
13887 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13888 # 1 stop bit*/2 stop bits
13889 # parity error detection off*/on
13891 # keyboard local/on line*
13892 # half/full duplex*
13893 # disable/do not disable keyboard after data transmission*
13895 # transmit entire page/stop transmission at cursor*
13896 # transfer/do not transfer protected characters*
13897 # transmit all characters/transmit only selected characters*
13898 # transmit all selected areas/transmit only 1 selected area*
13900 # transmit/do not transmit line separators to host*
13901 # transmit/do not transmit page tab stops tabs to host*
13902 # transmit/do not transmit column tab stop tabs to host*
13903 # transmit/do not transmit graphics control (underline,inverse..)*
13905 # enable*/disable auto XON/XOFF control
13906 # require/do not require receipt of a DC1 from host after each LF*
13907 # pause key acts as a meta key/pause key is pause*
13915 # XON character (17*)
13916 # XOFF character (19*)
13918 # C menu: 56 66 0 0 9600 0110 1100
13919 # number of lines to print data on (printer) (56*)
13921 # number of lines on a sheet of paper (printer) (66*)
13923 # left margin (printer) (0*)
13925 # number of pad chars on new line to printer (0*)
13927 # printer baud rate (9600*)
13929 # printer parity: 00=odd,01=even*,10=space,11=mark
13930 # printer stop bits: 2*/1
13931 # print/do not print guarded areas*
13933 # new line is: 01=LF,10=CR,11=CRLF*
13937 # D menu: 0110 1001 1 0
13938 # LF is newline/LF is down one line, same column*
13939 # wrap to preceding line if move left from col 1*/don't wrap
13940 # wrap to next line if move right from col 80*/don't wrap
13941 # backspace is/is not destructive*
13943 # display*/ignore DEL character
13944 # display will not/will scroll*
13945 # page/column tab stops*
13946 # erase everything*/erase unprotected only
13948 # editing extent: 0=display,1=line*,2=field,3=area
13953 annarbor4080|aa4080|ann arbor 4080,
13956 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
13957 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13958 %{12}%+%;%{64}%+%c,
13959 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
13960 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13962 # Strange Ann Arbor terminal from BRL
13963 aas1901|Ann Arbor K4080 w/S1901 mod,
13966 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
13967 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
13970 # If you're using the GNU termcap library, add
13971 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13972 # to these capabilities. This is the nonstandard GNU termcap scrolling
13973 # capability, arguments are:
13974 # 1. Total number of lines on the screen.
13975 # 2. Number of lines above desired scroll region.
13976 # 3. Number of lines below (outside of) desired scroll region.
13977 # 4. Total number of lines on the screen, the same as the first parameter.
13978 # The generic Ann Arbor entry is the only one that uses this.
13979 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13980 OTbs, am, km, mc5i, mir, xon,
13982 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13983 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
13984 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13985 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13986 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13987 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13988 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13989 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13990 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13991 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13992 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13993 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13994 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13995 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13996 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13997 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13998 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13999 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14000 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
14002 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
14003 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14006 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
14008 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14009 vpa=\E[%p1%{1}%+%dd,
14011 aaa+rv|ann arbor ambassador in reverse video,
14012 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
14013 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14014 rs1=\E[H\E[7m\E[J$<156>,
14015 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
14016 %;%?%p7%t8;%;m\016,
14017 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
14018 # Ambassador with the DEC option, for partial vt100 compatibility.
14019 aaa+dec|ann arbor ambassador in dec vt100 mode,
14020 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
14021 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
14022 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
14023 %p7%t8;%;m%?%p9%t\017%e\016%;,
14025 aaa-18|ann arbor ambassador/18 lines,
14027 is2=\E7\E[60;0;0;18p\E8,
14028 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
14030 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
14031 use=aaa+rv, use=aaa-18,
14032 aaa-20|ann arbor ambassador/20 lines,
14034 is2=\E7\E[60;0;0;20p\E8,
14035 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
14037 aaa-22|ann arbor ambassador/22 lines,
14039 is2=\E7\E[60;0;0;22p\E8,
14040 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
14042 aaa-24|ann arbor ambassador/24 lines,
14044 is2=\E7\E[60;0;0;24p\E8,
14045 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
14047 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
14048 use=aaa+rv, use=aaa-24,
14049 aaa-26|ann arbor ambassador/26 lines,
14051 is2=\E7\E[60;0;0;26p\E8,
14052 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
14053 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
14054 aaa-28|ann arbor ambassador/28 lines,
14056 is2=\E7\E[60;0;0;28p\E8,
14057 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
14058 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
14059 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
14062 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14063 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
14064 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
14065 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
14066 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14067 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
14068 use=aaa+rv, use=aaa-30-s,
14069 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
14070 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14071 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
14072 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
14073 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
14074 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
14075 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
14077 is2=\E7\E[60;0;0;30p\E8,
14078 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
14079 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
14080 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
14081 use=aaa+rv, use=aaa-30,
14082 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
14083 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14085 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
14086 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
14087 use=aaa+rv, use=aaa-30,
14088 aaa-36|ann arbor ambassador/36 lines,
14090 is2=\E7\E[60;0;0;36p\E8,
14091 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
14092 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
14093 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
14094 use=aaa+rv, use=aaa-36,
14095 aaa-40|ann arbor ambassador/40 lines,
14097 is2=\E7\E[60;0;0;40p\E8,
14098 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
14099 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
14100 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
14101 use=aaa+rv, use=aaa-40,
14102 aaa-48|ann arbor ambassador/48 lines,
14104 is2=\E7\E[60;0;0;48p\E8,
14105 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
14106 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
14107 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
14108 use=aaa+rv, use=aaa-48,
14109 aaa-60-s|ann arbor ambassador/59 lines+status,
14112 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
14113 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
14114 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
14115 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
14116 use=aaa+rv, use=aaa-60-s,
14117 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
14118 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
14119 aaa-60|ann arbor ambassador/60 lines,
14121 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
14123 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
14124 use=aaa+rv, use=aaa-60,
14125 aaa-db|ann arbor ambassador 30/destructive backspace,
14127 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
14129 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
14131 flash=\E[>59h$<100>\E[>59l,
14132 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
14133 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
14134 guru+rv|guru changes for reverse video,
14135 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
14136 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
14137 use=guru+rv, use=guru-33,
14138 guru+s|guru status line,
14140 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
14141 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
14142 tsl=\E[>51h\E[1;%p1%dH\E[2K,
14143 guru-nctxt|guru with no saved context,
14144 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
14145 guru-s|guru-33-s|ann arbor guru/33 lines+status,
14147 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
14148 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14149 guru-24|ann arbor guru 24 lines,
14151 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
14153 guru-44|ann arbor guru 44 lines,
14155 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
14157 guru-44-s|ann arbor guru/44 lines+status,
14159 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
14160 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14161 guru-76|guru with 76 lines by 89 cols,
14163 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
14165 guru-76-s|ann arbor guru/76 lines+status,
14167 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
14168 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14169 guru-76-lp|guru-lp|guru with page bigger than line printer,
14170 cols#134, lines#76,
14171 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
14173 guru-76-w|guru 76 lines by 178 cols,
14174 cols#178, lines#76,
14175 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
14177 guru-76-w-s|ann arbor guru/76 lines+status+wide,
14178 cols#178, lines#75,
14179 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
14180 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
14181 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
14182 cols#178, lines#76,
14183 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
14185 aaa-rv-unk|ann arbor unknown type,
14186 lh#0, lw#0, nlab#0,
14187 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
14188 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14190 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
14192 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
14194 #### Applied Digital Data Systems (adds)
14196 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
14197 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
14198 # terminals was merged again. Then AT&T sold the terminal business to
14199 # SunRiver, which later changed its name to Boundless Technologies. The
14200 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
14201 # as of early 1995) are at:
14203 # Boundless Technologies
14204 # 100 Marcus Boulevard
14205 # Hauppauge, NY 11788-3762
14206 # Vox: (800)-231-5445
14207 # Fax: (516)-342-7378
14208 # Web: http://boundless.com
14210 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
14211 # In 1995 Boundless acquired DEC's terminals business.
14214 # Regent: lowest common denominator, works on all regents.
14215 # (regent: renamed ":bc:" to ":le:" -- esr)
14216 regent|Adds Regent Series,
14219 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
14220 home=\EY\s\s, ind=\n, ll=^A,
14221 # Regent 100 has a bug where if computer sends escape when user is holding
14222 # down shift key it gets confused, so we avoid escape.
14223 regent100|Adds Regent 100,
14226 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
14227 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
14228 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
14229 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
14230 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
14231 regent20|Adds Regent 20,
14232 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
14234 regent25|Adds Regent 25,
14235 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
14237 regent40|Adds Regent 40,
14239 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
14240 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
14241 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
14242 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
14243 smul=\E0`, use=regent25,
14244 regent40+|Adds Regent 40+,
14245 is2=\EB, use=regent40,
14246 # It uses a different code for mapping acs vs dim/blink.
14247 regent60|regent200|adds200|Adds Regent 60,
14248 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, is2=\EV\EB,
14249 kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF, krmir=\EF, rmacs=\E2,
14250 rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1, smir=\EF,
14251 smso=\ER\E0P\EV, cd=\Ek, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
14252 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
14254 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
14255 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
14256 viewpoint|addsviewpoint|adds viewpoint,
14259 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
14260 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
14261 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
14262 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
14263 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
14264 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
14265 # Some viewpoints have bad ROMs that foo up on ^O
14266 screwpoint|adds viewpoint with ^O bug,
14267 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
14269 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
14270 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
14271 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
14272 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
14273 # invis=01000100 and %c is the logical or of desired attributes.
14274 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
14276 # Update by TD - 2004:
14278 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
14280 # COMMANDS ASCII CODE
14282 # Address, Absolute ESC,=,row,column
14284 # Aux Port Enable ESC,@
14285 # Aux Port Disable ESC,A
14289 # Cursor forward FF
14292 # Cursor suppress ETB
14293 # Cursor enable CAN
14294 # Erase to end of line ESC,T
14295 # Erase to end of page ESC,Y
14298 # Keyboard unlock SO
14299 # Read current cursor position ESC,?
14300 # Set Attribute ESC,0,x (see below for values of x)
14301 # Tag bit reset ESC,(
14302 # Tag bit set ESC,)
14303 # Transparent Print on ESC,3
14304 # Transparent Print off ESC,4
14310 # Half Intensity A 0101
14312 # Half Intensity Blinking C 0103
14313 # Reverse Video P 0120
14314 # Reverse Video Half Intensity Q 0121
14315 # Reverse Video Blinking R 0122
14316 # Reverse Video Half Intensity
14318 # Underlined ` 0140
14319 # Underlined Half Intensity a 0141
14320 # Underlined Blinking b 0142
14321 # Underlined Half Intensity
14323 # Video suppress D 0104
14324 vp3a+|viewpoint3a+|adds viewpoint 3a+,
14326 cols#80, it#8, lines#24,
14327 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
14328 cub1=^H, cud1=\n, cuf1=^L,
14329 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
14330 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
14331 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
14332 nel=\r\n, rev=\E0P\E), rmso=\E(,
14333 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
14334 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
14335 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
14336 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
14337 vp60|viewpoint60|addsvp60|adds viewpoint60,
14340 # adds viewpoint 90 - from cornell
14341 # Note: emacs sends ei occasionally to insure the terminal is out of
14342 # insert mode. This unfortunately puts the viewpoint90 IN insert
14343 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
14344 # - :ei=:im=: must be present in the termcap translation.)
14345 # - <xhp> indicates glitch that attributes stick to location
14346 # - <msgr> means it's safe to move in standout mode
14347 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
14349 # Function key and label capabilities merged in from SCO.
14350 vp90|viewpoint90|adds viewpoint 90,
14351 OTbs, bw, msgr, xhp,
14353 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
14354 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
14355 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
14356 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
14357 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
14358 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14359 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
14360 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
14361 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
14362 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
14363 # Note: if return acts weird on a980, check internal switch #2
14364 # on the top chip on the CONTROL pc board.
14365 adds980|a980|adds consul 980,
14368 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
14369 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
14370 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
14371 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
14372 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
14374 #### C. Itoh Electronics
14376 # As of 1995 these people no longer make terminals (they're still in the
14377 # printer business). Their terminals were all clones of the DEC VT series.
14378 # They're located in Orange County, CA.
14381 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
14382 # the delay times and do an auto tab set rather than the indirect
14383 # file used in vt100.
14384 cit80|cit-80|citoh 80,
14387 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14388 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
14389 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
14390 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
14391 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
14392 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
14393 cit101|citc|C.itoh fast vt100,
14396 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
14397 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14398 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14399 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
14400 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
14401 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14402 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14403 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
14405 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
14406 # The following termcap entry was created from the Callan cd100 entry. The
14407 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
14408 # full selection of combinations of reverse video, underline, and blink.
14409 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
14410 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
14411 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
14412 cit101e|C. Itoh CIT-101e,
14413 OTbs, OTpt, am, mir, msgr,
14414 cols#80, it#8, lines#24,
14415 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
14416 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
14417 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
14418 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
14419 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
14420 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
14421 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
14422 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
14423 smkx=\E=, smso=\E[7m, smul=\E[4m,
14424 # From: David S. Lawyer, June 1997:
14425 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
14426 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
14427 # late 1980's CIT Terminals went out of business.
14428 # There is no need to use the initialization string is=... (by invoking
14429 # tset or setterm etc.) provided that the terminal has been manually set
14430 # up (and the setup saved with ^S) to be compatible with this termcap. To be
14431 # compatible it should be in ANSI mode (not VT52). A set-up that
14432 # works is to set all the manually settable stuff to factory defaults
14433 # by pressing ^D in set-up mode. Then increase the brightness with the
14434 # up-arrow key since the factory default will likely be dim on an old
14435 # terminal. Then change any options you want (provided that they are
14436 # compatible with the termcap). For my terminal I set: Screen
14437 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
14438 # on. I also set up mine for parity (but you may not need it). Then
14439 # save the setup with ^S.
14440 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
14441 cit101e-rv|Citoh CIT-101e (sets reverse video),
14442 am, eo, mir, msgr, xenl, xon,
14443 cols#80, it#8, lines#24,
14444 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14445 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
14446 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14447 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14448 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14449 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14450 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14451 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14452 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
14453 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
14454 B\E[m\E[20l\E[1;24r\E[24;1H,
14455 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14456 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
14457 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
14458 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
14459 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
14460 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
14461 u7=\E[6n, u8=\E[?6c, u9=\E[c,
14462 cit101e-n|CIT-101e w/o am,
14464 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14466 cit101e-132|CIT-101e with 132 cols,
14468 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
14469 cit101e-n132|CIT-101e with 132 cols w/o am,
14472 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14474 # CIE Terminals CIT-500 from BRL
14475 # The following SET-UP modes are assumed for normal operation:
14476 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
14477 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
14478 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
14479 # Other SET-UP modes may be set for operator convenience or communication
14481 # Hardware tabs are assumed to be set every 8 columns; they can be set up
14482 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
14483 # "stty ixon -ixany" to enable DC3/DC1 flow control!
14484 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
14485 cit500|CIE Terminals CIT-500,
14486 OTbs, OTpt, mir, msgr, xon,
14487 OTkn#10, cols#80, it#8, lines#64, vt#3,
14488 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14489 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
14490 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
14491 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14492 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14493 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
14494 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
14495 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
14496 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
14497 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
14498 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
14499 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
14500 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
14501 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
14502 rmso=\E[m, rmul=\E[m,
14503 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
14504 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
14505 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14507 # C. Itoh printers begin here
14508 citoh|ci8510|8510|c.itoh 8510a,
14511 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
14512 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
14514 citoh-pica|citoh in pica,
14515 is1=\EN, use=citoh,
14516 citoh-elite|citoh in elite,
14519 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14522 citoh-comp|citoh in compressed,
14525 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14526 \,097\,105\,113\,121\,129.,
14528 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
14529 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
14531 is1=\EP, use=citoh,
14532 citoh-6lpi|citoh in 6 lines per inch mode,
14533 is3=\EA, use=citoh,
14534 citoh-8lpi|citoh in 8 lines per inch mode,
14536 is3=\EB, use=citoh,
14538 #### Control Data (cdc)
14541 cdc456|cdc 456 terminal,
14544 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14545 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
14546 el=^V, home=^Y, il1=\EL, ind=\n,
14548 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
14552 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14553 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14554 kcuu1=^W, khome=^Y,
14555 cdc721ll|CDC Viking with long lines,
14557 cols#132, lines#24,
14558 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14559 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14560 kcuu1=^W, khome=^Y,
14561 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
14565 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14566 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
14567 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
14569 # The following switch/key settings are assumed for normal operation:
14570 # 96 chars SCROLL FULL duplex not BLOCK
14571 # Other switches may be set according to communication requirements.
14572 # Insert/delete-character cannot be used, as the whole display is affected.
14573 # "so" & "se" are commented out until jove handles "sg" correctly.
14576 OTkn#10, cols#80, lines#24,
14577 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14578 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
14579 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
14580 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
14581 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
14582 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
14583 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
14584 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
14587 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
14589 # Part of the long initialization string defines the "DOWN" key to the left
14590 # of the tab key to send an ESC. The real ESC key is positioned way out
14593 # The termcap won't work in 132 column mode due to the way it it moves the
14594 # cursor. Termcap doesn't have the capability (as far as I could tell) to
14595 # handle the 721 in 132 column mode.
14597 # (cdc721: changed :ri: to :sr: -- esr)
14598 cdc721-esc|Control Data 721,
14599 OTbs, OTpt, am, bw, msgr, xon,
14600 OTkn#10, cols#80, it#8, lines#30,
14601 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
14602 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
14603 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
14604 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
14605 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
14606 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
14607 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
14609 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
14610 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
14611 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
14612 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
14613 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
14618 # Getronics is a Dutch electronics company that at one time was called
14619 # `Geveke' and made async terminals; but (according to the company itself!)
14620 # they've lost all their documentation on the command set. The hardware
14621 # documentation suggests the terminals were actually manufactured by a
14622 # Taiwanese electronics company named Cal-Comp. There are known
14623 # to have been at least two models, the 33 and the 50.
14626 # The 50 seems to be a top end vt220 clone, with the addition of a higher
14627 # screen resolution, a larger screen, at least 1 page of memory above and
14628 # below the screen, apparently pages of memory right and left of the screen
14629 # which can be panned, and about 75 function keys (15 function keys x normal,
14630 # shift, control, func A, func B). It also has more setup possibilities than
14631 # the vt220. The monitor case is dated November 1978 and the keyboard case is
14634 # The vt100 emulation works as is. The entry below describes the rather
14635 # non-conformant (but more featureful) ANSI mode.
14637 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
14638 visa50|geveke visa 50 terminal in ansi 80 character mode,
14641 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14642 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
14643 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14644 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14645 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14646 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
14647 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
14648 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
14649 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14650 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
14651 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
14652 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
14653 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
14654 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
14655 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
14656 lf3=A insert line, lf4=A delete line, lf5=A clear,
14657 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
14658 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
14659 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
14660 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
14661 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
14664 #### Human Designed Systems (Concept)
14666 # Human Designed Systems
14668 # King of Prussia, PA 19406
14669 # Vox: (610)-277-8300
14670 # Fax: (610)-275-5739
14671 # Net: support@hds.com
14673 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
14674 # the character-terminal business now (1995) and making X terminals. In
14675 # particular, the whole `Concept' line described here was discontinued long
14679 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
14680 # Extensive changes to c108 by arpavax:eric Feb 1982
14681 # Some unknown person at SCO then translated it to terminfo.
14683 # There seem to be a number of different versions of the C108 PROMS
14684 # (with bug fixes in its Z-80 program).
14686 # The first one that we had would lock out the keyboard of you
14687 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
14688 # Try that on your C108 and see if it sends a ^S when you type it.
14689 # If so, you have an old version of the PROMs.
14691 # You should configure the C108 to send ^S/^Q before running this.
14692 # It is much faster (at 9600 baud) than the c100 because the delays
14694 # new status line display entries for c108-8p:
14695 # <is3> - init str #3 - setup term for status display -
14696 # set programmer mode, select window 2, define window at last
14697 # line of memory, set bkgnd stat mesg there, select window 0.
14699 # <tsl> - to status line - select window 2, home cursor, erase to
14700 # end-of-window, 1/2 bright on, goto(line#0, col#?)
14702 # <fsl> - from status line - 1/2 bright off, select window 0
14704 # <dsl> - disable status display - set bkgnd status mesg with
14707 # There are probably more function keys that should be added but
14708 # I don't know what they are.
14710 # No delays needed on c108 because of ^S/^Q handshaking
14712 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
14713 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
14715 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
14716 c108-4p|concept108-4p|concept 108 w/4 pages,
14717 OTbs, eslok, hs, xon,
14719 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
14720 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
14721 %>%t\001%{96}%-%;%{32}%+%c,
14722 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
14723 ind=\n, is1=\EK\E!\E F,
14724 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
14725 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
14726 smcup=\EU\Ev 8p\Ep\r\E\025,
14727 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
14728 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
14729 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
14731 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
14732 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
14734 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
14736 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
14737 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
14740 # These have only window relative cursor addressing, not screen
14741 # relative. To get it to work right here, smcup/rmcup (which
14742 # were invented for the concept) lock you into a one page
14743 # window for screen style programs.
14745 # To get out of the one page window, we use a clever trick:
14746 # we set the window size to zero ("\Ev " in rmcup) which the
14747 # terminal recognizes as an error and resets the window to all
14750 # This trick works on c100 but does not on c108, sigh.
14752 # Some tty drivers use cr3 for concept, others use nl3, hence
14753 # the delays on cr and ind below. This padding is only needed at
14754 # 9600 baud and up. One or the other is commented out depending on
14755 # local conventions.
14757 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14758 # less than 6 but more than 2 will work.
14760 # Note: can't use function keys f7-f10 because they are
14761 # indistinguishable from arrow keys (!), also, del char and
14762 # clear eol use xon/xoff so they probably won't work very well.
14764 # Also note that we don't define insrt/del char/delline/eop/send
14765 # because they don't transmit unless we reset them - I figured
14766 # it was a bad idea to clobber their definitions.
14768 # The <mc5> sequence changes the escape character to ^^ so that
14769 # escapes will be passed through to the printer. Only trouble
14770 # is that ^^ won't be - ^^ was chosen to be unlikely.
14771 # Unfortunately, if you're sending raster bits through to be
14772 # plotted, any character you choose will be likely, so we lose.
14774 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14775 # cannot be # in is2 because it will hang a c100 with no printer
14777 c100|concept100|concept|c104|c100-4p|hds concept 100,
14778 OTbs, am, eo, mir, ul, xenl,
14779 cols#80, lines#24, pb#9600, vt#8,
14780 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14781 cub1=^H, cud1=\n, cuf1=\E=,
14782 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14783 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14784 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14785 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
14787 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14788 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14789 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14790 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14791 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14792 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14793 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14794 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14795 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14796 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14797 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14798 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14799 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14800 smso=\ED, smul=\EG,
14801 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14802 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14803 smso=\EE, use=c100,
14804 oc100|oconcept|c100-1p|old 1 page concept 100,
14808 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14809 # Lots of notes, originally inline, but ncurses doesn't grok that.
14811 # am: not available in power on mode, but turned on with \E[=107;207h in
14812 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14813 # to specify xenl:, but that would have rendered the last space on the
14814 # last line useless.
14815 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14817 # clear: Could be done with \E[2J alone, except that vi (and probably most
14818 # other programs) assume that this also homes the cursor.
14819 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14820 # scroll the window, and go back to window 1.
14821 # is2: the string may cause a warning to be issued by tic that it
14822 # found a very long line and that it suspects that a comma is missing
14823 # somewhere. This warning can be ignored (unless it comes up more than
14824 # once). The initialization string contains the following commands:
14826 # [Setup mode items changed from factory defaults:]
14827 # \E)0 set alternate character set to
14829 # ^O set character set to default
14830 # [In case it wasn't]
14831 # \E[m turn off all attributes
14832 # [In case they weren't off]
14833 # \E[=107; cursor wrap and
14834 # 207h character wrap on
14835 # \E[90;3u set Fkey definitions to "transmit"
14837 # \E[92;3u set cursor key definitions to
14838 # "transmit" defaults
14839 # \E[43;1u set shift F13 to transmit...
14841 # \E[44;1u set shift F14 to transmit...
14843 # \E[45;1u set shift F15 to transmit...
14845 # \E[46;1u set shift F16 to transmit...
14847 # \E[200;1u set shift up to transmit...
14849 # \E[201;1u set shift down to transmit...
14851 # \E[202;1u set shift right to transmit...
14853 # \E[203;1u set shift left to transmit...
14855 # \E[204;1u set shift home to transmit...
14857 # \E[212;1u set backtab to transmit...
14859 # \E[213;1u set shift backspace to transmit...
14861 # \E[214;1u set shift del to transmit...
14863 # [Necessary items not mentioned in setup mode:]
14864 # \E[2!w move to window 2
14865 # \E[25;25w define window as line 25 of memory
14866 # \E[!w move to window 1
14867 # \E[2*w show current line of window 2 as
14869 # \E[2+x set meta key to use high bit
14870 # \E[;3+} move underline to bottom of character
14872 # All Fkeys are set to their default transmit definitions with \E[90;3u
14873 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14874 # setting MUST be redefined or deactivated, because the default is
14875 # contained in almost all of this terminal's Fkey strings! If for some
14876 # reason "quit" cannot be altered, the Fkeys can, but it would be
14877 # necessary to change ^| to ^] in all of these definitions, and add
14878 # \E[2;029!t to is2.
14879 # lines: is set to 24 because this terminal refuses to treat the 25th
14881 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14883 # lm: Pointless, given that this definition locks a single screen of
14884 # memory into view, but what the hey...
14885 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14886 # other attributes alone), but some programs expect this to turn off
14888 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14889 # attributes alone), but some programs expect this to turn off
14891 # sgr: Attributes are set on this terminal with the string \E[ followed by
14892 # a list of attribute code numbers (in decimal, separated by
14893 # semicolons), followed by the character m. The attribute code
14896 # 2 for dim (which is ignored in power on mode);
14900 # 8 for not displayable; and
14901 # =99 for protected (except that there are strange side
14902 # effects to protected characters which make them inadvisable).
14903 # The mapping of terminfo parameters to attributes is as follows:
14904 # %p1 (standout) = bold and inverse together;
14905 # %p2 (underline) = underline;
14906 # %p3 (reverse) = inverse;
14907 # %p4 (blink) = blinking;
14908 # %p5 (dim) is ignored;
14909 # %p6 (bold) = bold;
14910 # %p7 (invisible) = not displayable;
14911 # %p8 (protected) is ignored; and
14912 # %p9 (alt char set) = alt char set.
14913 # The code to do this is:
14915 # %?%p1%p6%O IF (standout; bold) OR
14916 # %t;1 THEN OUTPUT ;1
14918 # %?%p2 IF underline
14919 # %t;4 THEN OUTPUT ;4
14922 # %t;5 THEN OUTPUT ;5
14924 # %?%p1%p3%O IF (standout; reverse) OR
14925 # %t;7 THEN OUTPUT ;7
14927 # %?%p7 IF invisible
14928 # %t;8 THEN OUTPUT ;8
14931 # %?%p9 IF altcharset
14932 # %t^N THEN OUTPUT ^N
14933 # %e^O ELSE OUTPUT ^O
14935 # sgr0: Everything is turned off (including alternate character set), since
14936 # there is no way of knowing what it is that the program wants turned
14938 # smul: The "underline" attribute is reconfigurable to an overline or
14939 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
14940 # bottom of the character cell. This was done to allow for more readable
14941 # underlined characters, and to be able to distinguish between an
14942 # underlined space, an underscore, and an underlined underscore.
14943 # xenl: Terminal can be configured to not need this, but this "glitch"
14944 # behavior is actually preferable with autowrap terminals.
14946 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14947 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14948 # string modifies the 'O' in kf43 to kf46 to a '$'.
14950 # kcbt was originally ^I but redefined in is2=.
14951 # kHOM was \E[H originally but redefined in is2=, as were a number of
14953 # kDC was originally \177 but redefined in is2=.
14955 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14956 # tsl: Go to window 2, then do an hpa=.
14958 #------- flash=\E[8;3!}^G\E[3;3!}
14959 #------- flash=\E[?5h$<100>\E[?5l
14960 # There are two ways to flash the screen, both of which have their drawbacks.
14961 # The first is to set the bell mode to video, transmit a bell character, and
14962 # set the bell mode back - but to what? There is no way of knowing what the
14963 # user's old bell setting was before we messed with it. Worse, the command to
14964 # set the bell mode also sets the key click volume, and there is no way to say
14965 # "leave that alone", or to know what it's set to, either.
14966 # The second way to do a flash is to set the screen to inverse video, pad for a
14967 # tenth of a second, and set it back - but like before, there's no way to know
14968 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14969 # it that way. The point is moot anyway, since vi (and probably other
14970 # programs) assume that by defining flash=, you want the computer to use it
14971 # INSTEAD of bel=, rather than as a secondary type of signal.
14973 #------- cvvis=\E[+{
14974 # The is the power on setting, which is also as visible as the cursor
14976 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14977 # Windowing is possible, but not defined here because it is also used to
14978 # emulate status line functions. Allowing a program to set a window could
14979 # clobber the status line or render it unusable. There is additional memory,
14980 # but screen scroll functions are destructive and do not make use of it.
14982 #------- dim= Not available in power on mode.
14983 # You have a choice of defining low intensity characters as "half bright" and
14984 # high intensity as "normal", or defining low as "normal" and high as "bold".
14985 # No matter which you choose, only one of either "half bright" or "bold" is
14986 # available at any time, so taking the time to override the default is
14989 #------- prot=\E[=0;99m
14990 # Not defined, because it appears to have some strange side effects.
14991 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14992 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14993 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14994 # Available, but making them available to programs is inadvisable.
14995 # The code to do this is:
14996 # %?%p1%{24}%< IF ((key; 24) <;
14997 # %p1%{30}%> ((key; 30) >;
14998 # %p1%{54}%< (key; 54) <
15001 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
15002 # %t\E[ THEN OUTPUT \E[
15003 # %p1%d OUTPUT (key) as decimal
15004 # [next line applies to pfx only]
15008 # %p2%s OUTPUT (string) as string
15010 # [DEL chosen as delimiter, but could be any character]
15011 # [implied: ELSE do nothing]
15015 # Not defined since anything it might do could be done faster and easier with
15016 # either Meta-Shift-Reset or the main power switch.
15018 #------- smkx=\E[1!z
15019 #------- rmkx=\E[!z
15020 # These sequences apply to the cursor and setup keys only, not to the
15021 # numeric keypad. But it doesn't matter anyway, since making these
15022 # available to programs is inadvisable.
15023 # For the key definitions below, all sequences beginning with \E$ are
15024 # custom and programmed into the terminal via is2. \E$ also has no
15025 # meaning to any other terminal.
15027 #------- cmdch=\E[;%p1%d!t
15028 # Available, but making it available to programs is inadvisable.
15029 #------- smxon=\E[1*q
15030 # Available, but making it available to programs is inadvisable.
15031 # Terminal will send XON/XOFF on buffer overflow.
15032 #------- rmxon=\E[*q
15033 # Available, but making it available to programs is inadvisable.
15034 # Terminal will not notify on buffer overflow.
15035 #------- smm=\E[2+x
15037 # Available, but making them available to programs is inadvisable.
15040 # It's not made clear in the manuals, but based on other ansi/vt type
15041 # terminals, it's a good guess that this terminal is capable of both
15042 # "transparent print" (which doesn't copy data to the screen, and
15043 # therefore needs mc5i: specified to say so) and "auxiliary print"
15044 # (which does duplicate printed data on the screen, in which case mc4=
15045 # and mc5= should use the \E[?4i and \E[?5i strings instead).
15047 hds200|Human Designed Systems HDS200,
15048 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
15049 cols#80, it#8, lines#24, lm#0,
15050 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15051 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
15052 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
15053 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15054 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15055 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15056 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15057 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
15058 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
15059 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15061 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
15062 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
15063 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
15064 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
15065 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
15066 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
15067 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
15068 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15069 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
15070 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
15071 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
15072 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
15073 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
15074 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
15075 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
15076 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
15077 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
15078 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
15079 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
15080 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
15081 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
15082 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
15083 rmul=\E[m\017, sc=\E7,
15084 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
15085 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
15086 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
15087 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
15088 vpa=\E[%i%p1%dd, use=ansi+pp,
15090 # <ht> through <el> included to specify padding needed in raw mode.
15091 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
15092 avt-ns|concept avt no status line,
15093 OTbs, am, eo, mir, ul, xenl, xon,
15094 cols#80, it#8, lines#24, lm#192,
15095 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15096 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
15097 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15098 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
15099 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15100 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
15101 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
15102 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
15103 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
15104 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
15105 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
15106 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
15108 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15109 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15110 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
15111 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
15112 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
15113 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
15114 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
15115 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
15117 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
15118 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
15120 sgr0=\E[m\016$<1>, smacs=\017$<1>,
15121 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
15122 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15123 vpa=\E[%p1%{1}%+%dd,
15124 avt-rv-ns|concept avt in reverse video mode/no status line,
15125 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
15127 avt-w-ns|concept avt in 132 column mode/no status line,
15128 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
15130 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
15131 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
15132 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
15134 # Concept AVT with status line. We get the status line using the
15135 # "Background status line" feature of the terminal. We swipe the
15136 # first line of memory in window 2 for the status line, keeping
15137 # 191 lines of memory and 24 screen lines for regular use.
15138 # The first line is used instead of the last so that this works
15139 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
15140 # assumes an 8 page AVT but lm isn't currently used anywhere.)
15142 avt+s|concept avt status line changes,
15145 dsl=\E[0*w, fsl=\E[1;1!w,
15146 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
15147 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
15148 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
15149 avt|avt-s|concept-avt|avt w/80 columns,
15150 use=avt+s, use=avt-ns,
15151 avt-rv|avt-rv-s|avt reverse video w/sl,
15152 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
15153 use=avt+s, use=avt-ns,
15154 avt-w|avt-w-s|concept avt 132 cols+status,
15155 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
15156 use=avt+s, use=avt-ns,
15157 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
15158 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
15159 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
15161 #### Contel Business Systems.
15164 # Contel c300 and c320 terminals.
15165 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
15167 cols#80, lines#24, xmc#1,
15168 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15169 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15170 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15171 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15172 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
15173 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15174 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15175 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
15176 # Contel c301 and c321 terminals.
15177 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
15178 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
15181 #### Data General (dg)
15183 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
15184 # the terminals group at Data General was shut down in 1991; all these
15185 # terminals have thus been discontinued.
15187 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
15188 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
15189 # sequentially, first the unmodified key codes are listed as F1 through F15.
15190 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
15191 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
15192 # F46 through F60. This is done in the private "includes" below whose names
15193 # start with "dgkeys+".
15195 # DG terminals generally support 8 bit characters. For each of these terminals
15196 # two descriptions are supplied:
15197 # 1) A default description for 8 bits/character communications, which
15198 # uses the default DG international character set and keyboard codes.
15199 # 2) A description with suffix "-7b" for 7 bits/character communications.
15200 # This description must use the NON-DEFAULT native keyboard language.
15202 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
15203 # Ctrl/Shift fdkeys (kf34-kf44).
15205 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
15206 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
15207 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
15208 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
15209 kf11=\233011z, kf12=\233012z, kf13=\233013z,
15210 kf14=\233014z, kf15=\233000z, kf16=\233101z,
15211 kf17=\233102z, kf18=\233103z, kf19=\233104z,
15212 kf2=\233002z, kf20=\233105z, kf21=\233106z,
15213 kf22=\233107z, kf23=\233108z, kf24=\233109z,
15214 kf25=\233110z, kf26=\233111z, kf27=\233112z,
15215 kf28=\233113z, kf29=\233114z, kf3=\233003z,
15216 kf30=\233100z, kf31=\233201z, kf32=\233202z,
15217 kf33=\233203z, kf34=\233204z, kf35=\233205z,
15218 kf36=\233206z, kf37=\233207z, kf38=\233208z,
15219 kf39=\233209z, kf4=\233004z, kf40=\233210z,
15220 kf41=\233211z, kf42=\233212z, kf43=\233213z,
15221 kf44=\233214z, kf45=\233200z, kf46=\233301z,
15222 kf47=\233302z, kf48=\233303z, kf49=\233304z,
15223 kf5=\233005z, kf50=\233305z, kf51=\233306z,
15224 kf52=\233307z, kf53=\233308z, kf54=\233309z,
15225 kf55=\233310z, kf56=\233311z, kf57=\233312z,
15226 kf58=\233313z, kf59=\233314z, kf6=\233006z,
15227 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
15228 khome=\233H, kprt=\233i,
15230 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
15231 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
15232 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15233 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
15234 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
15235 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
15236 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
15237 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
15238 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
15239 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
15240 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
15241 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
15242 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
15243 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
15244 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
15245 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
15246 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
15247 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
15248 kf9=\E[009z, khome=\E[H, kprt=\E[i,
15250 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
15251 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
15252 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
15253 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
15254 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
15255 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
15256 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
15257 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
15258 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
15259 kf8=^^x, kf9=^^y, khome=^H,
15261 dgkeys+15|Private entry describing 15 DG mode special keys,
15262 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
15263 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
15264 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
15265 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
15266 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
15267 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
15268 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
15269 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
15270 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
15271 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
15272 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
15275 # Data General color terminals use the "Tektronix" color model. The total
15276 # number of colors varies with the terminal model, as does support for
15277 # attributes used in conjunction with color.
15279 # Removed u7, u8 definitions since they conflict with tack:
15280 # Preserve user-defined colors in at least some cases.
15282 # Default is ACM mode.
15283 # u8=^^F}20^^Fi^^F}21,
15285 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
15287 colors#16, ncv#53, pairs#0x100,
15289 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15290 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15291 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15292 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15293 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15295 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
15298 # Video attributes are coordinated using static variables set by "sgr", then
15299 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
15300 # (D=dim, U=underline, B=blink, R=reverse.)
15301 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
15303 colors#8, ncv#16, pairs#64,
15304 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
15305 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15306 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15307 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15308 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15309 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15310 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15312 dg+color|Color info for Data General D470C terminals in ANSI mode,
15313 colors#16, ncv#53, pairs#0x100,
15314 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15315 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15317 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15318 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15320 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15321 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15323 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15324 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15328 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
15330 colors#8, ncv#16, pairs#64,
15332 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15334 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15336 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15338 dgmode+color|Color info for Data General D470C terminals in DG mode,
15339 colors#16, pairs#0x100,
15340 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15341 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15342 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15343 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15346 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
15348 colors#52, ncv#53, pairs#26,
15349 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
15350 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
15351 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
15353 oc=\036RG01A00FF00000000\036RG01B00000000FF00
15354 \036RG01C007F00000000\036RG01D000000007F00,
15355 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
15356 scp=\036RG2%p1%02X,
15358 # Colors are in the order: normal, reverse, dim, dim + reverse.
15359 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
15361 colors#52, ncv#53, pairs#26,
15362 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
15363 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
15364 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
15365 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
15366 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
15367 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
15368 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
15369 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
15370 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
15371 0000000\036RG01=000000007?00,
15372 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
15373 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
15375 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
15376 # Initialization string 1 sets:
15377 # ^R - vertical scrolling enabled
15378 # ^C - blinking enabled
15379 dg-generic|Generic Data General terminal in DG mode,
15382 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15383 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
15384 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
15385 smul=^T, use=dgkeys+11,
15387 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
15388 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
15389 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
15390 # maybe they were originally nuls (which would fit).
15392 dg200|data general dasher 200,
15395 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15396 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
15397 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
15398 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
15399 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
15402 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
15403 dg210|dg-ansi|Data General 210/211,
15406 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
15407 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15408 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15409 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
15410 smso=\E[7;m, smul=\E[4;m,
15411 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
15412 # courtesy of Carlos Rucalde of Vantage Software, Inc.
15413 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
15414 # I suspect the d200 function keys actually work on the dg211, check it out.)
15415 dg211|Data General d211,
15416 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
15417 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
15418 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
15420 # dg450 from Cornell (not official)
15421 dg450|dg6134|data general 6134,
15422 cub1@, cuf1=^X, use=dg200,
15425 # Note: lesser Dasher terminals will not work with vi because vi insists upon
15426 # having a command to move straight down from any position on the bottom line
15427 # and scroll the screen up, or a direct vertical scroll command. The 460 and
15428 # above have both, the D210/211, for instance, has neither. We must use ANSI
15429 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
15430 # backspace on all terminals. This is not so in DG mode.
15431 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
15432 # grounds that there is no matching ":ml:"
15433 dg460-ansi|Data General Dasher 460 in ANSI-mode,
15434 OTbs, am, msgr, ul,
15435 cols#80, it#8, lines#24,
15436 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
15437 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
15438 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15439 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
15440 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15441 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
15442 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
15443 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
15444 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
15445 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
15446 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
15448 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
15449 u7=\E[6n, u8=\E[5n, u9=\E[0n,
15450 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
15451 # Data General 605x
15452 # Ought to work for a Model 6242, Type D210 as well as a 605x.
15453 # Note that the cursor-down key transmits ^Z. Job control users, beware!
15454 # This also matches a posted description of something called a `Dasher 100'
15455 # so there's a dg100 alias here.
15456 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
15457 dg6053-old|dg100|data general 6053,
15460 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
15461 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
15462 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
15463 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
15464 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
15465 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
15468 # (Some performance can be gained over the generic DG terminal type)
15469 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
15471 home=\020\0\0, ll=^P\0^W, use=dg-generic,
15473 # Like 6053, but adds reverse video and more keypad and function keys.
15474 d200|d200-dg|Data General DASHER D200,
15475 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
15476 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15477 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
15478 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
15480 # DASHER D210 series terminals in ANSI mode.
15481 # Reverse video, no insert/delete character/line, 7 bits/character only.
15483 # Initialization string 1 sets:
15484 # <0 - scrolling enabled
15485 # <1 - blink enabled
15486 # <4 - print characters regardless of attributes
15487 d210|d214|Data General DASHER D210 series,
15490 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
15491 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15492 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15493 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
15494 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
15495 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
15496 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
15498 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
15500 # DASHER D210 series terminals in DG mode.
15501 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
15502 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
15504 ed=^^FF, use=d200-dg,
15506 # DASHER D211 series terminals in ANSI mode.
15507 # Like the D210, but with 8-bit characters and local printer support.
15509 # Initialization string 2 sets:
15511 # 2;1 - 8 bit operations
15512 # 1;1 - 8 bit (international) keyboard language
15513 # \E(B - default primary character set (U.S. ASCII)
15514 # \E)4 - default secondary character set (international)
15515 # ^O - primary character set
15517 d211|d215|Data General DASHER D211 series,
15519 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
15522 # Initialization string 2 sets:
15524 # 2;0 - 7 bit operations
15525 # 1;0 - 7 bit (native) keyboard language
15526 # \E(0 - default character set (the keyboard native language)
15527 # ^O - primary character set
15528 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
15530 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
15532 # Like the D210 series, but adds support for 8-bit characters.
15534 # Reset string 2 sets:
15535 # ^^N - secondary character set
15536 # ^^FS0> - 8 bit international character set
15537 # ^^O - primary character set
15538 # ^^FS00 - default character set (matching the native keyboard language)
15540 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
15542 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
15544 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
15547 # Enhanced DG mode with changes to be more UNIX compatible.
15548 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
15551 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
15552 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
15553 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
15554 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
15555 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
15556 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
15557 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
15558 rs2=\036N\036FS0E\036O\036FS00,
15559 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
15560 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
15562 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
15563 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
15564 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
15566 is3=^^Fz2, use=d216+,
15568 d217-unix|Data General DASHER D217 in DG-UNIX mode,
15570 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
15573 # DASHER D220 color terminal in ANSI mode.
15574 # Like the D470C but with fewer colors and screen editing features.
15576 # Initialization string 1 sets:
15578 # <0 - scrolling enabled
15579 # <1 - blink enabled
15580 # <4 - print characters regardless of attributes
15581 # \E[m - all attributes off
15582 # Reset string 1 sets:
15583 # \Ec - initial mode defaults (RIS)
15585 d220|Data General DASHER D220,
15587 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15588 use=dg+color8, use=d470c,
15590 d220-7b|Data General DASHER D220 in 7 bit mode,
15592 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15593 use=dg+color8, use=d470c-7b,
15595 # Initialization string 3 sets:
15596 # - default cursor (solid rectangle)
15597 # Reset string 2 sets:
15598 # ^^N - secondary character set
15599 # ^^FS0> - 8 bit international character set
15600 # ^^O - primary character set
15601 # ^^FS00 - default character set (matching the native keyboard language)
15603 d220-dg|Data General DASHER D220 color terminal in DG mode,
15605 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
15606 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
15609 # DASHER D230C color terminal in ANSI mode.
15610 # Like the D220 but with minor ANSI compatibility improvements.
15612 d230c|d230|Data General DASHER D230C,
15613 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
15614 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
15615 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
15616 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
15617 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
15618 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
15619 smul=\E[4;50m, use=dgkeys+7b, use=d220,
15621 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
15624 # DASHER D400/D450 series terminals.
15625 # These add intelligent features like insert/delete to the D200 series.
15627 # Initialization string 2 sets:
15628 # ^^FQ2 - default cursor (solid rectangle)
15629 # ^^FW - character protection disabled
15630 # ^^FJ - normal (80 column) mode
15631 # ^^F\^ - horizontal scrolling enabled (for alignment)
15632 # ^^FX004? - margins at columns 0 and 79
15633 # ^^F] - horizontal scrolling disabled
15634 # ^^O - primary character set
15635 # ^^FS00 - default character set (the keyboard native language)
15636 # - (should reset scrolling regions, but that glitches the screen)
15637 # Reset string 1 sets:
15638 # ^^FA - all terminal defaults except scroll rate
15639 # Reset string 2 sets:
15640 # ^^F] - horizontal scrolling disabled
15641 # ^^FT0 - jump scrolling
15643 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
15645 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
15646 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
15647 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
15648 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
15650 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
15652 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15653 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
15654 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
15657 # DASHER D410/D460 series terminals in ANSI mode.
15658 # These add a large number of intelligent terminal features.
15660 # Initialization string 1 sets:
15662 # <0 - scrolling enabled
15663 # <1 - blink enabled
15664 # <2 - horizontal scrolling enabled (for alignment)
15665 # <4 - print characters regardless of attributes
15666 # \E[5;0v - normal (80 column) mode
15667 # \E[1;1;80w - margins at columns 1 and 80
15669 # 1 - print all characters even if protected
15670 # 6 - character protection disabled
15671 # <2 - horizontal scrolling disabled
15672 # - (should reset scrolling regions, but that glitches the screen)
15674 # Initialization string 2 sets:
15676 # 3;2 - default cursor (solid rectangle)
15677 # 2;1 - 8 bit operations
15678 # 1;1 - international keyboard language
15679 # \E(B - default primary character set (U.S. ASCII)
15680 # \E)4 - default secondary character set (international)
15681 # ^O - primary character set
15683 # Reset string 1 sets:
15684 # \Ec - initial mode defaults (RIS)
15685 # \E[<2h - horizontal scrolling disabled
15687 # Reset string 2 sets:
15689 # 4;0 - jump scrolling
15690 # 2;1 - 8 bit operations
15691 # 1;1 - 8 bit (international) keyboard language
15692 # \E(B - default primary character set (U.S. ASCII)
15693 # \E)4 - default secondary character set (international)
15695 d410|d411|d460|d461|Data General DASHER D410/D460 series,
15697 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
15698 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15699 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
15700 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
15701 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
15702 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
15703 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
15704 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
15705 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
15706 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
15708 # Initialization string 2 sets:
15710 # 3;2 - default cursor (solid rectangle)
15711 # 2;0 - 7 bit operations
15712 # 1;0 - 7 bit (native) keyboard language
15713 # \E(0 - default character set (the keyboard native language)
15714 # ^O - primary character set
15716 # Reset string 2 sets:
15718 # 4;0 - jump scrolling
15719 # 2;0 - 7 bit operations
15720 # 1;0 - 7 bit (native) keyboard language
15721 # \E(0 - default character set (the keyboard native language)
15723 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
15725 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
15726 rs2=\E[4;0;2;0;1;0v\E(0,
15727 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
15728 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
15729 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
15731 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
15733 enacs@, rmacs=\036FS00,
15734 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15735 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
15737 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
15740 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15742 # Initialization string 1 sets:
15744 # <0 - scrolling enabled
15745 # <1 - blink enabled
15746 # <2 - horizontal scrolling enabled (for alignment)
15747 # <4 - print characters regardless of attributes
15748 # \E[5;1v - compressed (135 column) mode
15749 # \E[1;1;126 - margins at columns 1 and 126
15751 # 1 - print all characters even if protected
15752 # 6 - character protection disabled
15753 # <2 - horizontal scrolling disabled
15754 # - (should reset scrolling regions, but that glitches the screen)
15756 # Reset string 1 sets:
15757 # \Ec - initial mode defaults (RIS)
15758 # \E[5;1v - compressed (135 column) mode
15759 # \E[1;1;126w - margins at columns 1 and 126
15760 # \E[<2h - horizontal scrolling disabled
15762 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15764 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15765 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15767 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15769 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15770 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15772 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15775 # These add intelligent features like scrolling regions.
15776 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15777 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
15778 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15779 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15780 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15782 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15783 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
15784 vpa=\036FPFF%p1%2.2X,
15785 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15786 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15788 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15790 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15792 rs2=\036P@1\036FK\036FX0083,
15793 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15794 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15796 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15799 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15800 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15802 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15804 clear=\036FG\036PH, fsl=\036F}01\022,
15805 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15806 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15807 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15808 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15811 # Relative cursor motions are confined to the current window,
15812 # which is not what the scrolling region specification expects.
15813 # Thus, relative vertical cursor positioning must be deleted.
15814 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15815 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15817 cud1@, cuu1@, ll@, use=d462+,
15819 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15821 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15823 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15825 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15827 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15830 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15832 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15834 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15836 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15838 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15841 d430c-dg|d430-dg|Data General D430C in DG mode,
15842 use=d413-dg, use=dg+fixed,
15843 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15844 use=d413-dg, use=dg+ccc,
15846 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15847 use=d413-unix, use=dgunix+fixed,
15848 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15849 use=d413-unix-w, use=dgunix+fixed,
15850 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15851 use=d413-unix-25, use=dgunix+fixed,
15852 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15853 use=d413-unix-s, use=dgunix+fixed,
15854 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15855 use=d413-unix-sr, use=dgunix+fixed,
15856 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15857 use=d413-unix, use=dgunix+ccc,
15858 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15859 use=d413-unix-w, use=dgunix+ccc,
15860 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15861 use=d413-unix-25, use=dgunix+ccc,
15862 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15863 use=d413-unix-s, use=dgunix+ccc,
15864 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15865 use=d413-unix-sr, use=dgunix+ccc,
15867 # DASHER D470C color terminal in ANSI mode.
15868 # Like the D460 but with 16 colors and without a compressed mode.
15870 # Initialization string 1 sets:
15872 # <0 - scrolling enabled
15873 # <1 - blink enabled
15874 # <2 - horizontal scrolling enabled (for alignment)
15875 # <4 - print characters regardless of attributes
15876 # \E[1;1;80w - margins at columns 1 and 80
15878 # 1 - print all characters even if protected
15879 # 6 - character protection disabled
15880 # <2 - horizontal scrolling disabled
15881 # - (should reset scrolling regions, but that glitches the screen)
15883 d470c|d470|Data General DASHER D470C,
15884 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15885 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15886 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15887 use=dg+color, use=d460,
15889 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15890 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15891 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15892 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15893 use=dg+color, use=d460-7b,
15895 # Initialization string 2 sets:
15896 # ^^FQ2 - default cursor (solid rectangle)
15897 # ^^FW - character protection disabled
15898 # ^^F\^ - horizontal scrolling enabled (for alignment)
15899 # ^^FX004? - margins at columns 0 and 79
15900 # ^^F] - horizontal scrolling disabled
15901 # ^^O - primary character set
15902 # ^^FS00 - default character set (the keyboard native language)
15903 # - (should reset scrolling regions, but that glitches the screen)
15905 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15906 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15908 use=dgmode+color, use=d460-dg,
15910 # DASHER D555 terminal in ANSI mode.
15911 # Like a D411, but has an integrated phone.
15912 d555|Data General DASHER D555,
15914 d555-7b|Data General DASHER D555 in 7-bit mode,
15916 d555-w|Data General DASHER D555 in wide mode,
15918 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15920 d555-dg|Data General DASHER D555 series in DG mode,
15923 # DASHER D577 terminal in ANSI mode.
15924 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15925 d577|Data General DASHER D577,
15927 d577-7b|Data General DASHER D577 in 7-bit mode,
15929 d577-w|Data General DASHER D577 in wide mode,
15931 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15934 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15937 # DASHER D578 terminal.
15938 # Like a D577, but without compressed mode; like a D470C in this respect.
15940 # Initialization string 1 sets:
15942 # <0 - scrolling enabled
15943 # <1 - blink enabled
15944 # <2 - horizontal scrolling enabled (for alignment)
15945 # <4 - print characters regardless of attributes
15946 # \E[1;1;80w - margins at columns 1 and 80
15948 # 1 - print all characters even if protected
15949 # 6 - character protection disabled
15950 # <2 - horizontal scrolling disabled
15951 # - (should reset scrolling regions, but that glitches the screen)
15953 d578|Data General DASHER D578,
15954 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15955 d578-7b|Data General DASHER D578 in 7-bit mode,
15956 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15958 #### Datamedia (dm)
15960 # Datamedia was headquartered in Nashua, New Hampshire until it went
15961 # out of business in 1993, but the ID plates on the terminals referred
15962 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15963 # manufacturer which threw out all information about the terminals.
15966 cs10|colorscan|Datamedia Color Scan 10,
15969 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
15970 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15971 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15972 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15973 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15974 cs10-w|Datamedia Color Scan 10 with 132 columns,
15976 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15978 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15979 dm1520|dm1521|datamedia 1520,
15981 cols#80, it#8, lines#24,
15982 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
15983 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15984 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
15986 # dm2500: this terminal has both <ich> and <smir>. Applications using
15987 # termcap/terminfo directly (rather than through ncurses) might be confused.
15988 dm2500|datamedia2500|datamedia 2500,
15991 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
15992 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15993 dch1=\020\010\030\035$<10*>,
15994 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15995 ich1=\020\034\030\035$<10*>,
15996 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
15997 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15998 smdc=^P, smir=^P, smso=^N,
15999 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
16000 # also, has a meta-key.
16001 # From: <goldberger@su-csli.arpa>
16002 # (dmchat: ":MT:" changed to ":km:" -- esr)
16003 dmchat|dmchat version of datamedia 2500,
16005 dl1=\020\032\030\035$<2/>,
16006 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
16007 # (dm3025: ":MT:" changed to ":km:" -- esr)
16008 dm3025|datamedia 3025a,
16010 cols#80, it#8, lines#24,
16011 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16012 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
16013 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
16014 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
16015 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
16016 smir=\EP, smso=\EO1,
16017 dm3045|datamedia 3045a,
16018 OTbs, am, eo, km@, ul, xenl,
16019 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
16020 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
16021 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
16022 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
16024 # Datamedia DT80 soft switches:
16025 # 1 0=Jump 1=Smooth
16026 # Autorepeat 0=off 1=on
16027 # Screen 0=Dark 1=light
16028 # Cursor 0=u/l 1=block
16030 # 2 Margin Bell 0=off 1=on
16031 # Keyclick 0=off 1=on
16032 # ANSI/VT52 0=VT52 1=ANSI
16033 # Xon/Xoff 0=Off 1=On
16035 # 3 Shift3 0=Hash 1=UK Pound
16037 # Newline 0=Off 1=On
16038 # Interlace 0=Off 1=On
16040 # 4 Parity 0=Odd 1=Even
16041 # Parity 0=Off 1=On
16042 # Bits/Char 0=7 1=8
16043 # Power 0=60Hz 1=50Hz
16045 # 5 Line Interface 0=EIA 1=Loop
16046 # Aux Interface 0=EIA 1=Loop
16047 # Local Copy 0=Off 1=On
16050 # 6 Aux Parity 0=Odd 1=Even
16051 # Aux Parity 0=Off 1=On
16052 # Aux Bits/Char 0=7 1=8
16053 # CRT Saver 0=Off 1=On
16054 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
16055 dm80|dmdt80|dt80|datamedia dt80/1,
16056 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
16057 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
16058 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
16059 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
16060 smul=\E[4m, use=vt100+4bsd,
16061 # except in 132 column mode, where it needs a little padding.
16062 # This is still less padding than the vt100, and you can always turn on
16063 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
16065 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
16067 clear=\E[H\E[2J$<50/>, cud1=\n,
16068 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
16069 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
16070 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
16071 dt80-sas|Datamedia DT803/DTX for SAS usage,
16074 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
16075 bel=^G, clear=^L, cr=\r,
16076 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
16077 cub1=^H, cud1=\EB, cuf1=^\,
16078 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
16079 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
16080 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
16081 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
16082 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
16083 smso=\E$2\004, tbc=\E'0,
16085 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
16086 # These aren't end-all Excel termcaps; but do insert/delete char/line
16087 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
16088 # The naming convention has been bent somewhat, with the use of E? (where
16089 # E is for 'Excel') as # a name. This was done to distinguish the entries
16090 # from the other Datamedias in use here, and yet to associate a model of
16091 # the Excel terminals with the regular datamedia terminals that share
16092 # major characteristics.
16093 excel62|excel64|datamedia Excel 62,
16094 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16095 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16097 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
16098 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
16099 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
16101 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
16102 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
16103 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
16104 smir=\E[4h, use=dt80,
16108 # Falco Data Products
16109 # 440 Potrero Avenue
16110 # Sunnyvale, CA 940864-196
16111 # Vox: (800)-325-2648
16112 # Fax: (408)-745-7860
16113 # Net: techsup@charm.sys.falco.com
16115 # Current Falco models as of 1995 are generally ANSI-compatible and support
16116 # emulations of DEC VT-series, Wyse, and Televideo types.
16119 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
16120 # This terminal was released around 1983 and was discontinued long ago.
16121 # The standout and underline highlights are the same.
16122 falco|ts1|ts-1|falco ts-1,
16124 cols#80, it#8, lines#24,
16125 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
16126 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16127 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
16128 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
16129 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
16130 smir=\Eq, smso=\Eg1, smul=\Eg1,
16131 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
16132 OTbs, am, da, db, mir, msgr, ul,
16133 cols#80, it#8, lines#24,
16134 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
16135 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
16136 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
16137 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
16138 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
16139 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
16140 smso=\Eg4, smul=\Eg1,
16141 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
16142 ts100|ts100-sp|falco ts100-sp,
16143 am, mir, msgr, xenl, xon,
16144 cols#80, it#8, lines#24, vt#3,
16145 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16146 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16147 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
16148 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16149 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16150 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16151 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
16152 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
16153 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
16154 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16155 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16156 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16157 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16158 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
16159 %;m%?%p9%t\016%e\017%;$<2>,
16160 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16161 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16163 ts100-ctxt|falco ts-100 saving context,
16164 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
16166 #### Florida Computer Graphics
16169 # Florida Computer Graphics Beacon System, using terminal emulator program
16170 # "host.com", as provided by FCG. This description is for an early release
16171 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
16174 # From: David Bryant <cbosg!djb> 1/7/83
16175 beacon|FCG Beacon System,
16178 bel=\ESTART\r\E37\r\EEND\r$<1>,
16179 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
16180 cub1=^H, cud1=\n, cuf1=\EV,
16181 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
16182 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
16183 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
16184 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
16185 rmul=\ESTART\r\E60\,0\r\EEND\r,
16186 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
16187 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
16188 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
16189 smul=\ESTART\r\E60\,1\r\EEND\r,
16194 # The f1720a differences from ANSI: no auto margin, destructive
16195 # tabs, # of lines, funny highlighting and underlining
16196 f1720|f1720a|fluke 1720A,
16198 cols#80, lines#16, xmc#1,
16199 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
16200 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
16201 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
16202 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16203 smso=\E[7m, smul=\E[4m,
16205 #### Liberty Electronics (Freedom)
16207 # Liberty Electronics
16208 # 48089 Fremont Blvd
16210 # Vox: (510)-623-6000
16211 # Fax: (510)-623-7021
16213 # From: <faletti@berkeley.edu>
16214 # (f100: added empty <acsc> to suppress a tic warning;
16215 # made this relative to adm+sgr -- note that <invis> isn't
16216 # known to work for f100 but does on the f110. --esr)
16217 f100|freedom|freedom100|freedom model 100,
16218 OTbs, am, bw, hs, mir, msgr, xon,
16220 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
16221 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16222 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
16223 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
16224 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
16225 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
16226 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
16227 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16228 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
16229 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
16230 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16231 f100-rv|freedom-rv|freedom 100 in reverse video,
16232 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
16233 # The f110 and f200 have problems with vi(1). They use the ^V
16234 # code for the down cursor key. When kcud1 is defined in terminfo
16235 # as ^V, the Control Character Quoting capability (^V in insert mode)
16236 # is lost! It cannot be remapped in vi because it is necessary to enter
16237 # a ^V to to quote the ^V that is being remapped!!!
16239 # f110/f200 users will have to decide whether
16240 # to lose the down cursor key or the quoting capability. We will opt
16241 # initially for leaving the quoting capability out, since use of VI
16242 # is not generally applicable to most interactive applications
16243 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
16244 f110|freedom110|Liberty Freedom 110,
16247 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
16248 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
16249 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
16250 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16251 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
16252 smso=\EG<, tsl=\Ef, use=f100,
16253 f110-14|Liberty Freedom 110 14inch,
16255 f110-w|Liberty Freedom 110 - 132 cols,
16256 cols#132, use=f110,
16257 f110-14w|Liberty Freedom 110 14in/132 cols,
16260 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16261 f200|freedom200|Liberty Freedom 200,
16262 OTbs, am, eslok, hs, mir, msgr, xon,
16263 cols#80, it#8, lines#24, wsl#80,
16264 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
16265 clear=^Z, cnorm=\E.1, cr=\r,
16266 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
16267 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16268 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
16269 flash=\Eo$<200/>\En, fsl=\r, home=^^,
16270 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
16271 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
16272 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16273 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16274 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16275 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
16276 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16277 f200-w|Liberty Freedom 200 - 132 cols,
16278 cols#132, use=f200,
16279 # The f200 has the ability to reprogram the down cursor key. The key is
16280 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
16281 # so powering the terminal off and on will not cause the change to be lost.
16282 f200vi|Liberty Freedom 200 for vi,
16283 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
16284 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
16285 cols#132, use=f200vi,
16289 # Graphon Corporation
16290 # 544 Division Street
16291 # Campbell, CA 95008
16292 # Vox: (408)-370-4080
16293 # Fax: (408)-370-5047
16294 # Net: troy@graphon.com (Troy Morrison)
16297 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
16298 # including one odd hybrid that starts out life on power-up as a character
16299 # terminal, than can be switched to X graphics mode (driven over the serial
16300 # line) by an escape sequence. No info on this beast yet.
16301 # (go140: I added <rmam>/<smam> based on the init string -- esr)
16302 go140|graphon go-140,
16304 cols#80, it#8, lines#24,
16305 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
16306 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16307 ed=\E[J$<10/>, el=\E[K, ht=^I,
16308 if=/usr/share/tabset/vt100, il1=\E[L,
16309 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16310 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
16311 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
16312 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
16313 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
16314 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16315 go140w|graphon go-140 in 132 column mode,
16318 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16320 # Hacked up vt200 termcap to handle GO-225/VT220
16321 # From: <edm@nwnexus.WA.COM>
16322 # (go225: I added <rmam>/<smam> based on the init string -- esr)
16323 go225|go-225|Graphon 225,
16324 OTbs, am, mir, xenl,
16325 cols#80, it#8, lines#25, vt#3,
16326 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16327 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
16328 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16329 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
16330 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
16331 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16332 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
16333 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
16334 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
16335 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
16336 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
16337 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16339 #### Harris (Beehive)
16341 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
16342 # Their terminal group is ancient history now (1995) though the parent
16343 # company is still in business.
16346 # Beehive documentation is undated and marked Preliminary and has no figures
16347 # so we must have early Superbee2 (Model 600, according to phone conversation
16348 # with mfr.). It has proved reliable except for some missing padding
16349 # (notably after \EK and <nl> at bottom of screen).
16351 # The key idea is that AEP mode is poison for <cup> & that US's in
16352 # the local memory should be avoided like the plague. That means
16353 # that the 2048 character local buffer is used as 25 lines of 80
16354 # characters, period. No scrolling local memory, folks. It also
16355 # appears that we cannot use naked INS LINE feature since it uses
16356 # US. The sbi fakes <il1> with an 80-space insert that may be too
16357 # slow at low speeds; also spaces get converted to \040 which is
16358 # too long for some programs (not vi). DEL LINE is ok but slow.
16360 # The <nl> string is designed for last line of screen ONLY; cup to
16361 # 25th line corrects the motion inherent in scrolling to Page 1.
16363 # There is one understood bug. It is that the screen appears to
16364 # pop to a new (blank) page after a <nel>, or leave a half-line
16365 # ellipsis to a quad that is the extra 48 memory locations. The
16366 # data received is dumped into memory but not displayed. Not to
16367 # worry if <cup> is being used; the lines not displayed will be,
16368 # whenever the cursor is moved up there. Since <cup> is addressed
16369 # relative to MEMORY of window, nothing is lost; but beware of
16370 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
16371 # therefore, is setenv MORE -c .
16373 # WARNING: Not all features tested.
16375 # Timings are assembled from 3 sources. Some timings may reflect
16376 # SB2/Model 300 that were used if more conservative.
16377 # Tested on a Model 600 at 1200 and 9600 bd.
16379 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
16380 # placed on the keyboard and useless because of AEP, is made
16381 # into a backspace key. In use ESC must be pressed twice (to send)
16382 # and sending ^C must be prefixed by ESC to avoid that weird
16383 # transmit mode associated with ENTER key.
16385 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
16386 # the screen, then it has dropped into ENTER mode; hit
16387 # RESET--ONLINE--!tset.
16389 # As delivered this machine has a FATAL feature that will throw
16390 # it into that strange transmit state (SPOW) if the space bar is
16391 # hit after a CR is received, but before receiving a LF (or a
16394 # The circuits MUST be modified to eliminate the SPOW latch.
16395 # This is done by strapping on chip A46 of the I/O board; cut
16396 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
16397 # chip. This mod has been checked out on a Mod 600 of Superbee II.
16398 # With this modification absurdly high timings on cr are
16401 # NOTE WELL that the rear panel switch should be set to CR/LF,
16404 sb1|beehive superbee,
16405 OTbs, am, bw, da, db, mir, ul, xsb,
16406 cols#80, lines#25, xmc#1,
16407 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
16408 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
16409 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
16410 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
16411 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16412 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16413 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16414 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
16415 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
16416 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
16417 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
16418 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
16419 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
16420 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
16421 smso=\E_1, smul=\E_0, tbc=\E3,
16422 sbi|superbee|beehive superbee at Indiana U.,
16424 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
16426 # Alternate (older) description of Superbee - f1=escape, f2=^C.
16427 # Note: there are at least 3 kinds of superbees in the world. The sb1
16428 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
16429 # The sb3 puts garbage on the bottom of the screen when you scroll with
16430 # the switch in the back set to CRLF instead of AEP. This description
16431 # is tested on the sb2 but should work on all with either switch setting.
16432 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
16433 # the other two if you want to try to hit that tiny escape key.
16434 # This description is tricky: being able to use cup depends on there being
16435 # 2048 bytes of memory and the hairy <nl> string.
16436 superbee-xsb|beehive super bee,
16438 cols#80, it#8, lines#25,
16439 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
16440 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
16441 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
16442 home=\EH, ht=^I, hts=\E1,
16443 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
16444 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
16445 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
16446 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
16447 # This loses on lines > 80 chars long, use at your own risk
16448 superbeeic|super bee with insert char,
16449 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
16450 sb2|sb3|fixed superbee,
16451 xsb@, use=superbee,
16453 #### Beehive Medical Electronics
16455 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
16456 # Regarding your question though; Beehive terminals weren't made by Harris.
16457 # They were made by Beehive Medical Electronics in Utah. They went out of
16458 # business in the early '80s.
16460 # (OK, then, I don't know why a couple of these say "harris beehive".)
16463 # Reports are that most of these Beehive entries (except superbee) have not
16464 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
16466 # (bee: <ich1> was empty, which is obviously bogus -- esr)
16467 beehive|bee|harris beehive,
16470 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
16471 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16472 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
16473 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16474 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
16475 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
16476 smir=\EQ, smso=\EdP, smul=\Ed`,
16477 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
16478 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
16479 # look at those spaces in <rmso>/<smso>. Seems strange to me...
16480 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
16481 # really care, cook up one using ^F -- esr)
16482 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
16484 cols#80, it#8, lines#20,
16485 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
16486 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
16487 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
16488 beehive4|bh4|beehive 4,
16491 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
16492 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
16493 # There was an early Australian kit-built computer called a "Microbee".
16494 # It's not clear whether this is for one of those or for a relative
16496 microb|microbee|micro bee series,
16498 cols#80, it#8, lines#24,
16499 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16500 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16501 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16502 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
16503 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
16504 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
16506 # 8675, 8686, and bee from Cyrus Rahman
16507 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
16508 ha8675|harris 8675,
16509 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
16510 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
16511 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
16513 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
16515 ha8686|harris 8686,
16516 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
16517 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
16518 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
16520 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
16521 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
16522 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
16523 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
16527 # Hazeltine appears to be out of the terminal business as of 1995. These
16528 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
16529 # Harris. They have a hazeltine.com domain (but no web page there ) and can
16533 # 450 East Pulaski Road
16534 # Greenlawn, New York 11740
16536 # As late as 1993, manuals for the terminal product line could still be
16539 # TRW Customer Service Division
16542 # Fairfield, NJ 07007-2078
16544 # They're now (1998) a subsidiary of General Electric, operating under the
16545 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
16546 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
16549 # Since <cuf1> is blank, when you want to erase something you
16550 # are out of luck. You will have to do ^L's a lot to
16551 # redraw the screen. h1000 is untested. It doesn't work in
16552 # vi - this terminal is too dumb for even vi. (The code is
16553 # there but it isn't debugged for this case.)
16554 hz1000|hazeltine 1000,
16557 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
16559 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16560 hz1420|hazeltine 1420,
16563 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
16564 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
16565 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
16567 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
16568 # freakout with out-of-range args and tn3270. No hz since it needs to
16570 hz1500|hazeltine 1500,
16573 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16574 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
16575 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
16576 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
16577 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
16578 # h1510 assumed to be in sane escape mode. Else use h1500.
16579 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
16580 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
16581 # removed incorrect and overridden ":do=^J:" -- esr)
16582 hz1510|hazeltine 1510,
16585 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
16586 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
16587 el=\E^O, il1=\E^Z, ind=\n,
16589 # The following switch settings are assumed for normal operation:
16590 # FULL CR U/L_CASE ESCAPE
16591 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
16592 # Other switches may be set for operator convenience or communication
16594 hz1520|Hazeltine 1520,
16595 OTbs, am, bw, msgr,
16597 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
16598 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16599 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
16600 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
16601 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
16602 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
16603 # This version works with the escape switch off
16604 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
16605 hz1520-noesc|hazeltine 1520,
16608 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16609 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
16610 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
16611 # Note: the h1552 appears to be the first Hazeltine terminal which
16612 # is not braindamaged. It has tildes and backprimes and everything!
16613 # Be sure the auto lf/cr switch is set to cr.
16614 hz1552|hazeltine 1552,
16616 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
16617 lf2=red, lf3=green, use=vt52,
16618 hz1552-rv|hazeltine 1552 reverse video,
16619 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
16620 # Note: h2000 won't work well because of a clash between upper case and ~'s.
16621 hz2000|hazeltine 2000,
16624 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
16625 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
16626 il1=~\032$<6>, ind=\n, pad=^?,
16627 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
16628 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
16629 # to work ok. There is one problem though if one types a lot of garbage
16630 # characters very fast vi seems not able to keep up and hangs while trying
16631 # to insert. That's in insert mode while trying to insert in the middle of
16632 # a line. It might be because the Esprit doesn't have insert char and delete
16633 # char as a built in function. Vi has to delete to end of line and then
16634 # redraw the rest of the line.
16635 esprit|Hazeltine Esprit I,
16638 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
16639 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16640 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
16641 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
16642 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
16643 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
16644 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
16645 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
16646 esprit-am|hazeltine esprit auto-margin,
16648 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
16649 # Vi it seems always wants to send a control J for "do" and it turned out
16650 # that the terminal would work somewhat if the auto LF/CR was turned off.
16651 # (hmod1: removed :dn=~^K: -- esr)
16652 hmod1|Hazeltine Modular 1,
16655 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16656 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
16657 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
16658 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
16660 # Hazeltine Executive 80 Model 30 (1554?)
16661 # from Will Martin <control@ALMSA-1.ARPA> via BRL
16662 # Like VT100, except for different "am" behavior.
16663 hazel|exec80|h80|he80|Hazeltine Executive 80,
16665 cols#80, it#8, lines#24, vt#3,
16666 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
16667 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
16668 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
16669 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
16670 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
16671 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
16672 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16673 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
16674 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
16675 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
16676 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16677 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
16683 ibm327x|line mode IBM 3270 style,
16685 clear=\r\n, el=\r, home=\r,
16687 ibm3101|i3101|IBM 3101-10,
16690 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16691 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16692 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
16693 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
16694 ibm3151|IBM 3151 display,
16695 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
16696 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16697 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16698 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
16699 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
16700 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
16701 # removed kend, knp, kpp -TD
16703 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16704 # Added ich1 (kich1 without ich1 doesn't make sense).
16705 # Added il1 (kil1 without il1 doesn't make sense).
16706 # Added xon (terminal uses XON/XOFF flow control).
16708 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
16709 OTbs, am, mir, msgr, xon,
16710 cols#80, it#8, lines#24,
16711 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
16713 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
16714 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16715 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16716 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
16717 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16718 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
16719 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
16720 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
16721 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
16722 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
16723 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
16724 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
16725 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
16726 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
16727 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16728 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16729 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
16730 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
16732 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
16733 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
16735 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16736 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
16739 ibm3162|IBM 3162 display,
16740 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16741 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16744 # This really should not use setab/setaf, but it is clear that the
16745 # original terminfo does not toggle red/blue colors as in setb/setf.
16746 ibm3164|i3164|IBM 3164,
16748 colors#8, pairs#64,
16749 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16750 setab=\E4 %p1%{64}%+%c,
16751 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16752 smcup=\E!9/N\E>B, use=ibm3161,
16754 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16756 cols#80, it#8, lines#25,
16757 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16759 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16760 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16761 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16762 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16763 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16764 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16765 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16766 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16767 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16768 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16769 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16770 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16771 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16772 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16773 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16774 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16775 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16776 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16777 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16778 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16779 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16780 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16781 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16783 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16785 ibmaed|IBM Experimental display,
16786 OTbs, am, eo, msgr,
16787 cols#80, it#8, lines#52,
16788 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16789 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16790 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16791 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16792 rmso=\E0, sgr0=\E0, smso=\E0,
16793 ibm-apl|apl|IBM apl terminal simulator,
16794 lines#25, use=dm1520,
16795 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16796 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16797 ibmmono|IBM workstation monochrome,
16799 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16800 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16801 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16802 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16803 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16804 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16806 ibmega|IBM Enhanced Color Display,
16807 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16808 nel=\r\n, use=ibmmono,
16809 # This color scheme is assumed in some recent IBM terminal descriptions
16810 # (green on black, emulated on a 16-color terminal).
16811 ibm+color|IBM color definitions,
16812 colors#8, ncv#3, pairs#64,
16814 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16815 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16816 %=%t46m%e%p1%{7}%=%t107m%;,
16817 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16818 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16819 %=%t36m%e%p1%{7}%=%t97m%;,
16820 ibm+16color|IBM aixterm color definitions,
16821 colors#16, pairs#0x100,
16822 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16823 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16824 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16825 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16826 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16827 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16828 ibm5154|IBM 5154 Color display,
16829 colors#8, ncv@, pairs#64,
16830 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16832 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16833 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16835 ibmvga-c|IBM VGA display color termcap,
16836 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16837 nel=\r\n, use=ibmega-c,
16838 ibmvga|IBM VGA display,
16839 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16840 nel=\r\n, use=ibmega,
16841 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16842 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16844 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16845 ibm6155|IBM 6155 Black & White display,
16846 blink@, bold@, use=ibm5151,
16847 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16848 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16850 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16851 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16853 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16855 ibm6154|IBM 6154 Color displays,
16856 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16857 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16859 sgr0=\E[0;10m, use=ibm5154,
16860 ibm6153|IBM 6153 Black & White display,
16861 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16862 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16864 sgr0=\E[0;10m, use=ibm5151,
16865 ibm6153-90|IBM 6153 Black & White display,
16867 blink@, bold@, use=ibm5151,
16868 ibm6153-40|IBM 6153 Black & White display,
16869 cols#40, lines#12, use=ibm6153-90,
16870 ibm8512|ibm8513|IBM color VGA Terminal,
16872 cols#80, it#8, lines#25,
16873 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16874 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
16875 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16876 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16877 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16878 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16879 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16880 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16881 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16882 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16883 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16884 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16885 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16887 hft-c|HFT with Color,
16888 colors#8, pairs#64,
16889 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16890 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16891 use=ibm5151, use=ibm+color,
16892 hft-c-old|HFT with Color PC850,
16893 colors#8, pairs#64,
16894 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16896 hft-old|AIWS High Function Terminal,
16899 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16900 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16901 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16902 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
16903 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16904 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16905 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16906 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16907 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16908 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16909 ibm-system1|system1|ibm system/1 computer,
16912 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16913 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16915 # lft-pc850 : IBM Low Function Terminal Device
16916 # lft "supports" underline, bold, and blink in the sense that the lft code
16917 # sets all the right bits. HOWEVER, depending upon the adapter, these
16918 # attributes may or may not be supported by the device driver.
16919 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16921 cols#80, it#8, lines#25,
16922 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16924 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16925 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16926 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16927 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16928 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16929 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16930 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16931 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16932 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16933 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16934 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16935 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16936 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16937 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16938 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16939 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16940 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16941 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16942 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16943 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16944 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16945 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16946 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16947 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16948 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16950 # "Megapel" refers to the display adapter, which was used with the IBM RT
16952 ibm5081|hft|IBM Megapel Color display,
16953 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16954 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16955 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16958 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16960 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16962 ibm8514|IBM 8514/a color VGA display,
16964 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16965 ibm8514-c|IBM 8514 color display with standout and underline,
16968 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
16969 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
16973 # AIX entries. IBM ships these with AIX 3.2.5.
16974 # -- added rc, sc based on manpage -TD
16975 # -- added rmacs, smacs based on manpage -TD
16976 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16977 aixterm|IBM Aixterm Terminal Emulator,
16979 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16980 fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
16982 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16983 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16984 sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
16986 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16988 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16989 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16990 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16991 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16992 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16993 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16995 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16996 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16998 tsl=\E[?%p1%dT, use=ibm6153,
16999 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
17001 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17003 sgr0=\E[m, smacs@, use=aixterm,
17004 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
17006 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
17008 sgr0=\E[m, smacs@, use=aixterm-m,
17010 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
17011 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
17012 use=ibm+16color, use=aixterm,
17014 #### Infoton/General Terminal Corp.
17017 # gt100 sounds like something DEC would come out with. Let's hope they don't.
17018 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
17021 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17022 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
17023 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
17024 ind=\n, rmso=\Ea, smso=\Eb,
17028 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
17029 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
17030 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
17031 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
17032 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
17036 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
17037 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
17038 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
17042 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
17043 ed=^K, ind=\n, ll=^H^\,
17045 # The ICL6402 was actually the Kokusai Display System 6402.
17046 # The 6404 was the KDS7372 (color version of the 6402).
17048 # ICL6404 control codes follow:
17051 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17052 #ctrl-A set SOM position at cursor position
17055 #ctrl-I Horizontal tab
17058 #ctrl-L Cursor right
17059 #ctrl-M Carriage return
17060 #ctrl-N Disable xon/xoff to host
17061 #ctrl-O Enable xon/xoff to host
17062 #ctrl-R Enable bidirectional mode
17063 #ctrl-T Disable bidirectional mode
17064 #ctrl-V Cursor down
17065 #ctrl-Z Clear unprotected data to insert char
17066 #ctrl-^ Cursor home
17069 #ESC lead-in char for multiple character command
17071 #ESC space R execute power on sequence
17072 #ESC ! p1 p2 define scroll region:
17073 # p1 = scroll top line: 20h - 37h
17074 # p1 = scroll bottom line: 20h - 37h
17075 #ESC " unlock keyboard
17076 #ESC # lock keyboard
17077 #ESC $ Semi-graphics mode on
17078 #ESC % Semi-graphics mode off
17079 #ESC & protect mode on
17080 #ESC ' protect mode off
17081 #ESC ( write protect mode off (full intensity)
17082 #ESC ) write protect mode on (half intensity)
17084 #ESC * clear screen
17085 #ESC + clear unprotected data to insert char
17086 #ESC , clear unprotected data to half intensity spaces
17087 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
17088 # p1 = page number 0 - 3
17089 # p2 = row 20h - 7fh
17090 # p3 = column (lo) 20h - 7fh
17091 # p4 = column (hi) 20h - 21h (only 132 col)
17092 #ESC . p1 set cursor style:
17093 # p1 = 0 invisible cursor
17094 # p1 = 1 block blinking cursor
17095 # p1 = 2 block steady cursor
17096 # p1 = 3 underline blinking cursor
17097 # p1 = 4 underline steady cursor
17098 #ESC / transmit cursor location (page, row, column)
17099 #ESC 0 p1 p2 p3 p4 program edit key:
17100 # p1 = edit key code: '@'-'S', '`'-'s'
17101 # p2 p3 p4 = program data (3 bytes)
17104 #ESC 2 clear tab at cursor
17105 #ESC 3 clear all tabs
17106 #ESC 4 send unprotect line to cursor
17107 #ESC 5 send unprotect page to cursor
17108 #ESC 6 send line to cursor
17109 #ESC 7 send page to cursor
17110 #ESC 8 n set scroll mode:
17111 # n = 0 set jump scroll
17112 # n = 1 set smooth scroll
17113 #ESC 9 n control display:
17114 # n = 0 display off
17116 #ESC : clear unprotected data to null
17117 #ESC ; clear unprotected data to insert char
17120 #ESC = p1 p2 address cursor to row, column
17121 # p1 = row 20h - 7fh
17122 # p2 = column (lo) 20h - 7fh
17123 # p3 = column (hi) 20h - 21h (only 132 col)
17124 #ESC > keyclick off
17125 #ESC ? transmit cursor location (row, column)
17127 #ESC @ copy print mode on
17128 #ESC A copy print mode off
17129 #ESC B block mode on
17130 #ESC C block mode off (conversation mode)
17131 #ESC D F set full duplex
17132 #ESC D H set half duplex
17134 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
17135 # 0 = black, 1 = red, 2 = green, 3 = yellow
17136 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
17137 #ESC G n set serial field attribute (n = 30h - 3Fh)
17138 #ESC H n full graphics mode:
17139 # n = 0 exit full graphics mode
17140 # n = 1 enter full graphics mode
17143 #ESC K forward page
17145 #ESC L unformatted page print
17146 #ESC M L move window left (132 col mode only)
17147 #ESC M R move window right (132 col mode only)
17148 #ESC N set page edit (clear line edit)
17149 #ESC O set line edit (clear page edit)
17150 #ESC P formatted page print
17151 #ESC Q character insert
17153 #ESC S send message unprotected only
17154 #ESC T erase line to insert char
17155 #ESC U set monitor mode (see ESC X, ESC u)
17157 #ESC V n select video attribute mode:
17158 # n = 0 serial field attribute mode
17159 # n = 1 parallel character attribute mode
17160 #ESC V 2 n define line attribute:
17161 # n = 0 single width single height
17162 # n = 1 single width double height
17163 # n = 2 double width single height
17164 # n = 3 double width double height
17165 #ESC V 3 n select character font:
17166 # n = 0 system font
17167 # n = 1 user defined font
17168 #ESC V 4 n select screen mode:
17169 # n = 0 page screen mode
17170 # n = 1 virtual screen mode
17171 #ESC V 5 n control mouse mode:
17172 # n = 0 disable mouse
17173 # n = 1 enable sample mode
17174 # n = 2 send mouse information
17175 # n = 3 enable request mode
17176 #ESC W character delete
17177 #ESC X clear monitor mode (see ESC U, ESC u)
17178 #ESC Y erase page to insert char
17180 #ESC Z n send user/status line:
17181 # n = 0 send user line
17182 # n = 1 send status line
17183 # n = 2 send terminal ID
17184 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
17188 # 3 = blink blank (= blank)
17190 # 5 = reverse blank
17191 # 6 = reverse blink
17192 # 7 = reverse blink blank (= reverse blank)
17194 # 9 = underline blank
17195 # : = underline blink
17196 # ; = underline blink blank
17197 # < = reverse underline
17198 # = = reverse underline blank
17199 # > = reverse underline blink
17200 # ? = reverse underline blink blank
17201 # p2, p3: f/grnd, b/grnd colour
17202 # (see ESC F for colours)
17203 # use ZZ for mono, eg.
17204 # ESC [ 0 Z Z for normal
17205 # ESC [ 4 Z Z for inverse etc.
17207 #ESC \ n set page size:
17208 # n = 1 24 lines/page
17209 # n = 2 48 lines/page
17210 # n = 3 72 lines/page
17211 # n = 4 96 lines/page
17212 #ESC ] n set Wordstar mode:
17213 # n = 0 normal (KDS7372) mode
17214 # n = 1 Wordstar mode
17216 #ESC b set foreground colour screen
17218 #ESC c n enter self-test mode:
17219 # n = 0 exit self test mode
17223 # n = 4 screen display test
17224 # n = 5 main/printer port test
17225 # n = 6 mouse port test
17226 # n = 7 graphics board test
17227 # n = 8 graphics memory test
17228 # n = 9 display all 'E'
17229 # n = : display all 'H'
17230 #ESC d set background colour screen
17232 #ESC e n program insert char (n = insert char)
17233 #ESC f text CR load user status line with 'text'
17235 #ESC g display user status line on 25th line
17236 #ESC h display system status line on 25th line
17238 #ESC j reverse linefeed
17239 #ESC k n duplex/local edit mode:
17240 # n = 0 duplex edit mode
17241 # n = 1 local edit mode
17242 #ESC l n select virtual screen:
17245 #ESC m save current config to NVRAM
17246 #ESC n p1 select display screen:
17251 #ESC o p1 p2 set characters/line and attribute:
17252 # p1 = 0 80 chars/line
17254 #ESC o p1 p2 set characters/line and attribute:
17255 # p1 = 0 80 chars/line
17256 # p1 = 1 132 chars/line
17257 # p2 = 0 single width single height
17258 # p2 = 1 single width double height
17259 # p2 = 2 double width single height
17260 # p2 = 3 double width double height
17262 #ESC q insert mode on
17263 #ESC r edit mode on
17264 #ESC s send message all
17265 #ESC t erase line to null
17266 #ESC u clear monitor mode (see ESC U, ESC X)
17267 #ESC v autopage mode on
17268 #ESC w autopage mode off
17269 #ESC x p1 p2 p3 define delimiter code...
17270 #ESC y erase page to null
17272 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
17273 # p1 = starting row
17274 # p2 = starting column
17278 #ESC { p1 p2 p3 p4 configure main port
17279 # (baud, stop bits, parity, word length)
17281 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
17282 # p1 = function key code:
17283 # '1' - ';' normal f1- f11
17284 # '<' - 'F' shifted f1 - f11
17285 # p2 = program mode:
17289 # Ctrl-Y = terminator
17290 # (use Ctrl-P to escape ^P, ^Y )
17292 #ESC } p1 p2 p3 p4 configure printer port
17293 # (baud, stop bits, parity, word length)
17294 #ESC ~ send system status
17296 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
17298 # Entry is by esr going solely on above information and is UNTESTED.
17299 # This actually looks a lot like a Televideo 9xx.
17300 # This entry uses page 0 and is monochrome; I'm not brave enough to try
17301 # to make color work without a test terminal. The <am> capability is a guess.
17302 # The initialization string sets conversation mode, blinking underline cursor,
17303 # full duplex, parallel attribute mode, display user status line, white
17304 # foreground, black background, normal highlight.
17306 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
17309 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
17310 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
17312 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
17313 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
17314 hts=\E1, il1=\EE, invis=\E[1ZZ,
17315 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
17316 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
17317 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
17318 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
17319 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
17320 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
17321 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
17322 rs2=\Eo1, use=icl6404,
17324 #### Interactive Systems Corp
17326 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
17327 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
17328 # bought out by Sun.
17331 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
17332 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
17333 # ":le=^_:" later overridden -- esr)
17334 intext|Interactive Systems Corporation modified owl 1200,
17336 cols#80, it#8, lines#24, xmc#1,
17337 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
17338 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
17339 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
17340 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
17341 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
17342 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
17343 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
17344 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
17346 intext2|intextii|INTERACTIVE modified owl 1251,
17348 cols#80, lines#24, xmc#0,
17349 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
17350 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17351 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
17352 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
17353 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
17354 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
17355 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
17356 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
17357 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
17358 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
17359 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
17362 #### Kimtron (abm, kt)
17364 # Kimtron seems to be history, but as March 1998 these people are still
17365 # offering repair services for Kimtron equipment:
17367 # Com/Pair Monitor Service
17368 # 1105 N. Cliff Ave.
17369 # Sioux Falls, South Dakota 57103
17371 # WATS voice: 1-800/398-4946
17372 # POTS fax: +1 605/338-8709
17373 # POTS voice: +1 605/338-9650
17374 # Email: <compair@sd.cybernex.net>
17375 # Internet/Web: <http://www.com-pair.com>
17377 # Kimtron entries include (undocumented) codes for: enter dim mode,
17378 # enter bold mode, enter reverse mode, turn off all attributes.
17381 # Kimtron ABM 85 added by Dual Systems
17382 # (abm85: removed duplicated ":kd=^J:" -- esr)
17383 abm85|Kimtron ABM 85,
17384 OTbs, am, bw, msgr,
17385 cols#80, it#8, lines#24, xmc#1,
17386 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
17387 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17388 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
17389 if=/usr/share/tabset/stdcrt, il1=\EE,
17390 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
17391 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
17392 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
17393 # Kimtron ABM 85H added by Dual Systems.
17394 # Some notes about the abm85h entries:
17395 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
17396 # firmware revs prior to SP51
17397 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
17398 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
17399 # in some places and NOT software settable i.e., <is2> can't fix it)
17400 # 3) In 85h mode, the arrow keys and special functions transmit when
17401 # the terminal is in dup-edit, and work only locally in local-edit.
17402 # Vi won't swallow `del char' for instance, but <smcup> turns on
17403 # dup-edit anyway so that the arrow keys will work right. If the
17404 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
17405 # <is2>. Note that 920E mode does not have software commands to toggle
17406 # between dup and local edit, so you get whatever was set last on the
17408 # 4) <flash> attribute is nice, but seems too slow to work correctly
17410 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
17411 # are selected, the <xmc@> entry should be removed.
17412 # 6) auto new-line should be on (selectable from setup mode only)
17414 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
17415 abm85h|Kimtron ABM 85H native mode,
17418 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
17420 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
17422 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
17424 abm85e|Kimtron ABM 85H in 920E mode,
17426 bel=^G, dim=\E), flash@,
17427 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
17429 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17430 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
17433 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
17435 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17436 # From: <malman@bbn-vax.arpa>
17437 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
17438 kt7|kimtron model kt-7,
17440 cols#80, it#8, lines#24,
17441 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
17442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17443 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
17444 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
17445 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
17446 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
17447 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17448 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17449 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
17450 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
17451 # other kt7 entry and the adjacent key capabilities). Removed EE which is
17452 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
17453 # but we can't figure out what.
17454 kt7ix|kimtron model kt-7 or 70 in IX mode,
17456 cols#80, it#8, lines#25,
17457 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
17458 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
17459 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17460 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
17461 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
17462 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
17463 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
17464 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17465 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17466 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
17467 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
17468 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
17470 #### Microdata/MDIS
17472 # This was a line of terminals made by McDonnell-Douglas Information Systems.
17473 # These entries come direct from MDIS documentation. I have edited them only
17474 # to move primary names of the form p[0-9] * to aliases, and to comment out
17475 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
17476 # also removed the change history; the last version indicates this is
17477 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
17480 # McDonnell Information Systems Terminal Family History
17481 # =========================================
17483 # Prism-1, Prism-2 and P99:
17484 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
17486 # Prism-4 and Prism-5:
17487 # Slightly less ancient range of Microdata terminals. Follow-on from
17488 # Prism-2, but with many enhancements. P5 has eight display pages.
17491 # A special terminal for use with library systems, primarily in Germany.
17492 # Limited numbers. Similar functionality to P5 (except attributes?).
17494 # Prism-7, Prism-8 and Prism-9:
17495 # More recent range of MDIS terminals, in which P7 and P8
17496 # replace the P4 & P5, with added functionality, and P9 is the flagship.
17497 # The P9 has two emulation modes - P8 and ANSI - and includes a
17498 # large number of the DEC VT220 control sequences. Both
17499 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
17501 # Prism-12 and Prism-14:
17502 # Latest range, functionally very similar to the P9. The P14 has a
17503 # black-on-white overscanning screen.
17505 # The terminfo definitions given here are:
17507 # p2 - Prism-2 (or Prism-1 or P99).
17509 # p4 - Prism-4 (and older P7s & P8s).
17510 # p5 - Prism-5 (or Prism-6).
17513 # p8 - Prism-8 (in national or multinational mode).
17514 # p8-w - 132 column version of p8.
17515 # p9 - Prism-9 in ANSI mode.
17516 # p9-w - 132 column version of p9.
17517 # p9-8 - Prism-9 in Prism-8 emulation mode.
17518 # p9-8-w - As p9-8, but with 132 columns.
17520 # p12 - Prism-12 in ANSI mode.
17521 # p12-w - 132 column version of p12.
17522 # p12-m - Prism-12 in MDC emulation mode.
17523 # p12-m-w - As p12-m, but with 132 columns.
17524 # p14 - Prism-14 in ANSI mode.
17525 # p14-w - 132 column version of p14.
17526 # p14-m - Prism-14 in MDC emulation mode.
17527 # p14-m-w - As p14-m, but with 132 columns.
17532 # Includes Prism-1 and basic P99 without SP or MP loaded.
17533 # The simplest form of Prism-type terminal.
17534 # Basic cursor movement and clearing operations only.
17535 # No video attributes.
17537 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17538 # value up, followed by backspace.
17540 prism2|MDC Prism-2,
17543 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17544 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17545 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17546 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
17547 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17548 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17549 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
17554 # Includes early versions of P7 & P8.
17555 # Basic family definition for most Prisms (except P2 and P9 ANSI).
17557 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17558 # value up, followed by backspace.
17559 # Cursor key definitions removed because they interfere with vi and csh keys.
17561 prism4|p4|P4|MDC Prism-4,
17562 am, bw, hs, mc5i, msgr,
17563 cols#80, lines#24, wsl#72, xmc#1,
17564 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
17565 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17566 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17567 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17568 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
17569 fsl=\035\345, home=^A,
17570 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17571 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17572 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
17573 rev=^CD, rmso=^C\s, rmul=^C\s,
17574 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
17575 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
17576 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
17577 vpa=\013%p1%{32}%+%c,
17582 # Same definition as p4. Includes Prism-6 (not tested!).
17583 # Does not use any multi-page features.
17585 prism5|p5|P5|MDC Prism-5,
17591 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
17593 # Use p4 for very early models of P7.
17594 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17596 prism7|p7|P7|MDC Prism-7,
17597 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
17602 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
17603 # Supports national and multinational character sets.
17605 # Alternate char set operations only work in multinational mode.
17606 # Use p4 for very early models of P8.
17607 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17608 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17610 prism8|p8|P8|MDC Prism-8,
17611 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
17612 vpa=\E[%i%p1%dd, use=p4,
17614 # p8-w: Prism-8 in 132 column mode
17615 # --------------------------------
17617 # 'Wide' version of p8.
17619 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17621 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
17623 is2=\E[<12h\E[<14h, use=p8,
17625 # p9: Prism-9 in ANSI mode
17626 # -------------------------
17628 # The "flagship" model of this generation of terminals.
17629 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
17631 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
17632 # Fixes to deal with terminal firmware bugs:
17633 # . 'ri' uses insert-line since rev index doesn't always
17634 # . 'sgr0' has extra '0' since esc[m fails
17635 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
17636 # Not covered in the current definition:
17638 # . Programming Fn keys
17639 # . Graphic characters (defaults correctly to vt100)
17640 # . Padding values (sets xon)
17641 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17643 prism9|p9|P9|MDC Prism-9 in ANSII mode,
17644 am, bw, hs, msgr, xenl, xon,
17645 cols#80, it#8, lines#24, vt#3, wsl#72,
17646 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
17647 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
17648 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17649 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17650 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17651 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
17652 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
17653 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
17654 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
17655 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
17656 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17657 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17658 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
17659 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
17660 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
17661 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
17662 rmso=\E[27m, rmul=\E[24m,
17663 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
17666 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
17667 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
17668 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17669 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
17672 # p9-w: Prism-9 in 132 column mode
17673 # --------------------------------
17675 # 'Wide' version of p9.
17677 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
17679 is2=\E[&p\E[<12l\E F\E[<14h,
17680 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
17682 # p9-8: Prism-9 in P8 mode
17683 # ------------------------
17685 # P9 terminal in P8 emulation mode.
17686 # Similar to p8 definition.
17687 # Insertion and deletion operations possible.
17689 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
17690 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17691 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
17693 # p9-8-w: Prism-9 in P8 and 132 column modes
17694 # ------------------------------------------
17696 # P9 terminal in P8 emulation mode and 132 column mode.
17698 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
17699 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17700 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
17702 # p12: Prism-12 in ANSI mode
17703 # ---------------------------
17705 # See p9 definition.
17707 prism12|p12|P12|MDC Prism-12 in ANSI mode,
17710 # p12-w: Prism-12 in 132 column mode
17711 # ----------------------------------
17713 # 'Wide' version of p12.
17715 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
17718 # p12-m: Prism-12 in MDC emulation mode
17719 # -------------------------------------
17721 # P12 terminal in MDC emulation mode.
17722 # Similar to p8 definition.
17723 # Insertion and deletion operations possible.
17725 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
17728 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
17729 # -------------------------------------------------------
17731 # P12 terminal in MDC emulation mode and 132 column mode.
17733 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
17736 # p14: Prism-14 in ANSII mode
17737 # ---------------------------
17739 # See p9 definition.
17741 prism14|p14|P14|MDC Prism-14 in ANSII mode,
17744 # p14-w: Prism-14 in 132 column mode
17745 # ----------------------------------
17747 # 'Wide' version of p14.
17749 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17752 # p14-m: Prism-14 in MDC emulation mode
17753 # -------------------------------------
17755 # P14 terminal in MDC emulation mode.
17756 # Similar to p8 definition.
17757 # Insertion and deletion operations possible.
17759 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17762 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17763 # -------------------------------------------------------
17765 # P14 terminal in MDC emulation mode and 132 column mode.
17767 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17770 # End of McDonnell Information Systems Prism definitions
17772 # These things were popular in the Pick database community at one time
17773 # From: George Land <georgeland@aol.com> 24 Sep 1996
17774 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17776 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17777 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
17778 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17779 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
17780 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17781 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17782 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17783 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17784 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17785 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
17786 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17789 #### Microterm (act, mime)
17791 # The mime1 entries refer to the Microterm Mime I or Mime II.
17792 # The default mime is assumed to be in enhanced act iv mode.
17795 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17796 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17797 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17798 # since Sytek insists ^S means xoff.
17799 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17800 act4|microterm|microterm act iv,
17803 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
17804 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17805 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17806 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17807 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
17809 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17810 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17811 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17812 act5|microterm5|microterm act v,
17813 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17815 # Mimes using brightness for standout. Half bright is really dim unless
17816 # you turn up the brightness so far that lines show up on the screen.
17817 mime-fb|full bright mime1,
17818 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17819 mime-hb|half bright mime1,
17820 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17821 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17822 # the more plausible ":do=^J:" -- esr)
17823 # uc was at one time disabled to get around a curses bug, be wary of it
17824 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17826 cols#80, it#8, lines#24, vt#9,
17827 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
17828 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17829 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17830 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17831 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17832 # These termcaps (for mime2a) put the terminal in low intensity mode
17833 # since high intensity mode is so obnoxious.
17834 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17837 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17838 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17839 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17840 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
17841 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17842 smir=\EE, smso=\E\:, smul=\E6,
17843 # This is the preferred mode (but ^X can't be used as a kill character)
17844 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17846 cols#80, it#8, lines#24,
17847 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17848 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17849 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17850 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
17851 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17852 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17853 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17854 mime3a|mime1 emulating 3a,
17856 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17857 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17859 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17861 # Wed Mar 9 18:53:21 1983
17862 # We run our terminals at 2400 baud, so there might be some timing problems at
17863 # higher speeds. The major improvements in this model are the terminal now
17864 # scrolls down and insert mode works without redrawing the rest of the line
17865 # to the right of the cursor. This is done with a bit of a kludge using the
17866 # exit graphics mode to get out of insert, but it does not appear to hurt
17867 # anything when using vi at least. If you have some users using act4s with
17868 # programs that use curses and graphics mode this could be a problem.
17869 mime314|mm314|mime 314,
17872 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17873 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17874 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17875 # Microterm mime 340 from University of Wisconsin
17876 mm340|mime340|mime 340,
17878 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17879 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17880 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17881 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
17882 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
17883 # This came from University of Wisconsin marked "astro termcap for jooss".
17884 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17885 # also added <rmam>/<smam> based on the init string -- esr)
17886 mt4520-rv|micro-term 4520 reverse video,
17887 am, hs, msgr, xenl, xon,
17888 cols#80, it#8, lines#24, wsl#80,
17889 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
17890 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17891 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17892 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17893 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17894 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17895 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17896 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17897 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17899 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17900 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17901 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17902 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17903 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17904 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17905 tbc=\E[g, tsl=\E[25;1H,
17907 # Fri Aug 5 08:11:57 1983
17908 # This entry works for the ergo 4000 with the following setups:
17909 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17912 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17913 # Be advised that very early versions DO NOT WORK RIGHT !!
17914 # Microterm does have a ROM exchange program- use it or lose big
17915 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17916 ergo4000|microterm ergo 4000,
17919 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
17920 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17921 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17922 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17923 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17924 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17925 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17926 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17927 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17928 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17933 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17934 # For what happened to that group, see the ADDS section.
17936 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17939 # The following vendor-supplied termcaps were captured from the Boundless
17940 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17941 # identical, except for case, to lower-case ones. I also uncommented the acsc
17944 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17945 # DEC vt200/300 with color capabilities added.
17946 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17947 colors#8, pairs#64,
17948 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17950 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17951 # DEC vt200/300 with color capabilities added.
17952 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17953 colors#8, pairs#64,
17954 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17955 use=ncr260vt300wan,
17956 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17957 # DEC vt200/300 with color capabilities added.
17958 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17959 colors#8, pairs#64,
17960 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17962 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17963 # DEC vt200/300 with color capabilities added.
17964 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17965 colors#8, pairs#64,
17966 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17967 use=ncr260vt300wpp,
17968 # This definition for ViewPoint supports several attributes. This means
17969 # that it has magic cookies (extra spaces where the attributes begin).
17970 # Some applications do not function well with magic cookies. The System
17971 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17972 # If supporting various attributes is not vital, 'xmc#1' and the extra
17973 # attributes can be removed.
17974 # Mapping to ASCII character set ('acsc' capability) can also be
17975 # restored if needed.
17976 ncr260vppp|NCR 2900_260 viewpoint,
17977 am, bw, hs, km, mc5i, mir, msgr, xon,
17978 cols#80, lines#24, nlab#32, xmc#1,
17979 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17980 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17981 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17982 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17983 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17984 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
17985 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17986 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17988 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17989 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
17990 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
17991 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17992 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17993 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
17994 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
17995 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
17996 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
17997 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
17998 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17999 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
18000 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
18001 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18002 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18004 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
18005 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
18006 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
18008 cup=\Ea%i%p1%dR%p2%dC$<30>,
18009 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18011 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
18014 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
18015 am, hs, mir, msgr, xenl, xon,
18016 cols#80, lines#24, nlab#32,
18017 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18018 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18019 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18020 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
18021 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18022 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18023 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18024 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18025 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18026 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
18027 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
18028 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
18029 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
18031 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18033 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18034 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
18035 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
18036 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
18037 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
18038 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18041 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18042 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18043 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
18044 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
18045 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
18046 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
18048 cup=\E[%i%p1%d;%p2%dH$<30>,
18049 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18051 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18054 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
18055 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18057 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18058 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18059 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
18060 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
18061 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18063 smkx=\E=, use=ncr260vt100an,
18064 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
18066 cup=\E[%i%p1%d;%p2%dH$<30>,
18067 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18069 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18072 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
18073 am, hs, mir, msgr, xenl, xon,
18074 cols#80, lines#24, nlab#32,
18075 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18076 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18077 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18078 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
18079 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18080 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18081 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18082 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18083 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18084 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
18085 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
18086 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
18087 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
18088 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18090 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18091 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
18092 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
18093 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
18094 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
18095 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
18096 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
18097 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
18098 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
18099 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
18100 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
18101 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
18102 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
18103 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
18104 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18107 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18108 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18109 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
18110 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18111 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
18113 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
18115 cup=\E[%i%p1%d;%p2%dH$<30>,
18116 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
18117 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
18118 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
18119 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18120 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18121 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18122 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
18124 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
18126 cup=\E[%i%p1%d;%p2%dH$<30>,
18127 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18129 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
18132 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
18133 am, hs, mir, msgr, xenl, xon,
18134 cols#80, lines#24, nlab#32,
18135 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18136 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18137 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
18138 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
18139 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
18140 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
18141 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
18142 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
18143 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
18144 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
18145 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
18146 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
18147 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
18148 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18150 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18151 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
18152 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
18153 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
18154 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
18155 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
18156 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
18157 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
18158 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18159 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18160 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
18161 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
18162 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18164 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18167 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18168 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
18169 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
18170 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18171 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
18173 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
18175 cup=\E[%i%p1%d;%p2%dH$<30>,
18176 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
18178 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
18181 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
18182 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
18183 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
18184 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18185 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
18187 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
18189 cup=\E[%i%p1%d;%p2%dH$<30>,
18190 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18192 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18195 # This terminfo file contains color capabilities for the Wyse325 emulation of
18196 # the NCR 2900/260C color terminal. Because of the structure of the command
18197 # (escape sequence) used to set color attributes, one of the fore/background
18198 # colors must be preset to a given value. I have set the background color to
18199 # black. The user can change this setup by altering the last section of the
18200 # 'setf' definition. The escape sequence to set color attributes is
18201 # ESC d y <foreground_color> <background_color> 1
18202 # In addition, the background color can be changed through the desk accessories.
18203 # The capability 'op' sets colors to green on black (default combination).
18205 # NOTE: The NCR Unix System Administrator's Shell will not function properly
18206 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
18207 # capability and recompile if you wish to have it included.
18209 ncr260wy325pp|NCR 2900_260 wyse 325,
18210 am, bw, hs, km, mc5i, mir, msgr, xon,
18211 colors#16, cols#80, lines#24, ncv#33, nlab#32,
18212 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18213 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
18214 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18215 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18216 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18217 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
18218 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18219 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18221 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18222 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
18223 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
18224 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
18225 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
18226 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
18227 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
18228 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
18229 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18230 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
18231 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18232 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18233 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18234 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18235 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18238 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18239 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18240 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
18241 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
18242 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
18243 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
18244 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
18245 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18247 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
18249 cup=\Ea%i%p1%dR%p2%dC$<30>,
18250 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18252 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18255 # This definition for Wyse 350 supports several attributes. This means
18256 # that it has magic cookies (extra spaces where the attributes begin).
18257 # Some applications do not function well with magic cookies. The System
18258 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18259 # If supporting various attributes is not vital, 'xmc#1' and the extra
18260 # attributes can be removed.
18261 # Mapping to ASCII character set ('acsc' capability) can also be
18262 # restored if needed.
18263 # In addition, color capabilities have been added to this file. The drawback,
18264 # however, is that the background color has to be black. The foreground colors
18265 # are numbered 0 through 15.
18267 # NOTE: The NCR Unix System Administrator's Shell does not function properly
18268 # with the 'pairs' capability defined as below. If you wish to
18269 # have it included, Un-comment it and recompile (using 'tic').
18271 ncr260wy350pp|NCR 2900_260 wyse 350,
18272 am, bw, hs, km, mc5i, mir, msgr, xon,
18273 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
18274 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18275 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18276 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18277 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
18278 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18279 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
18280 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18281 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18283 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18284 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18285 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18286 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18287 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18288 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18289 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18290 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18291 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18292 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18293 mc0=\EP$<10>, mc4=^T, mc5=^R,
18294 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
18295 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18296 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18297 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18300 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18301 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18302 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
18303 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
18304 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
18305 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
18306 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
18307 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18309 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
18311 cup=\Ea%i%p1%dR%p2%dC$<30>,
18312 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18314 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18317 # This definition for Wyse 50+ supports several attributes. This means
18318 # that it has magic cookies (extra spaces where the attributes begin).
18319 # Some applications do not function well with magic cookies. The System
18320 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18321 # If supporting various attributes is not vital, 'xmc#1' and the extra
18322 # attributes can be removed.
18323 # Mapping to ASCII character set ('acsc' capability) can also be
18324 # restored if needed.
18325 # (ncr260wy50+pp: originally contained commented-out
18326 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
18327 ncr260wy50+pp|NCR 2900_260 wyse 50+,
18328 am, bw, hs, km, mc5i, mir, msgr, xon,
18329 cols#80, lines#24, nlab#32, xmc#1,
18330 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
18331 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18332 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18333 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
18334 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18335 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
18336 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
18338 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18339 \Ee4\Ex@\E`9\Ee7$<100>,
18340 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18341 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18342 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18343 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18344 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18345 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18346 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18347 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18348 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18349 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18350 mc0=\EP$<10>, mc4=^T, mc5=^R,
18351 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18352 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18353 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18354 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18355 \Ee4\Ex@\E`9\Ee7$<100>,
18356 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
18357 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
18358 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
18360 cup=\Ea%i%p1%dR%p2%dC$<30>,
18361 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18362 \Ee4\Ex@\E`9\Ee7$<200>,
18363 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18364 \Ee4\Ex@\E`9\Ee7$<200>,
18366 ncr260wy60pp|NCR 2900_260 wyse 60,
18367 am, bw, hs, km, mc5i, mir, msgr, xon,
18368 cols#80, lines#24, nlab#32,
18369 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18370 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
18371 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18372 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18373 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18374 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
18375 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
18377 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18378 \Ee4\Ex@\E`9\Ee7$<100>,
18379 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18380 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
18381 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18382 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18383 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
18384 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
18385 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
18386 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
18387 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
18388 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18389 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18390 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
18391 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18392 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18393 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18394 \Ee4\Ex@\E`9\Ee7$<100>,
18395 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
18396 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
18398 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
18400 cup=\Ea%i%p1%dR%p2%dC$<30>,
18401 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18402 \Ee4\Ex@\E`9\Ee7$<100>,
18403 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18404 \Ee4\Ex@\E`9\Ee7$<100>,
18406 ncr160vppp|NCR 2900_160 viewpoint,
18408 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
18410 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
18412 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
18414 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
18415 use=ncr260vt100wan,
18416 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
18417 use=ncr260vt100wpp,
18418 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
18420 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
18422 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
18423 use=ncr260vt200wan,
18424 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
18425 use=ncr260vt200wpp,
18426 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
18428 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
18430 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
18431 use=ncr260vt300wan,
18432 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
18433 use=ncr260vt300wpp,
18434 ncr160wy50+pp|NCR 2900_160 wyse 50+,
18436 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
18437 use=ncr260wy50+wpp,
18438 ncr160wy60pp|NCR 2900_160 wyse 60,
18440 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
18442 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
18443 am, hs, mc5i, mir, msgr, xon,
18444 cols#80, it#8, lines#24, nlab#32,
18445 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
18446 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
18447 clear=\E[2J\E[1;1H$<300>, cr=\r,
18448 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
18449 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
18450 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
18451 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
18452 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
18453 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
18454 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
18455 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
18456 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
18458 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
18459 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
18460 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
18461 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
18462 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
18463 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
18464 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
18465 B\E)0\E%/0n\E[P\031$<200>,
18467 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
18468 %p3%|%t;7%;%?%p4%t;5%;m$<100>,
18469 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
18470 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
18472 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
18474 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
18475 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
18476 \E)0\E%/0n\E[P\031$<200>,
18479 # Vendor-supplied NCR termcaps end here
18481 # NCR7900 DIP switches:
18485 # 5 - Parity (Odd/Even)
18486 # 6 - Don't Send or Do Send Spaces
18487 # 7 - Parity Enable
18488 # 8 - Stop Bits (One/Two)
18491 # 1 - Upper/Lower Shift
18492 # 2 - Typewriter Shift
18493 # 3 - Half Duplex / Full Duplex
18494 # 4 - Light/Dark Background
18495 # 5-6 - Carriage Return Without / With Line Feed
18496 # 7 - Extended Mode
18497 # 8 - Suppress Keyboard Display
18500 # 1 - End of line entry disabled/enabled
18501 # 2 - Conversational mode / (Local?) Mode
18502 # 3 - Control characters displayed / not displayed
18503 # 4 - (2-wire?) / 4-wire communications
18504 # 5 - RTS on and off for each character
18505 # 6 - (50Hz?) / 60 Hz
18506 # 7 - Exit after level zero diagnostics
18507 # 8 - RS-232 interface
18510 # 1 - Reverse Channel (yes / no)
18511 # 2 - Manual answer (no / yes)
18512 # 3-4 - Cursor appearance
18513 # 5 - Communication Rate
18514 # 6 - Enable / Disable EXT turnoff
18515 # 7 - Enable / Disable CR turnoff
18516 # 8 - Enable / Disable backspace
18518 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
18519 # reverse, blink, dim, and underline) the appropriate number of bits (by
18520 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
18521 # '@' is (effectively) "or"ed with each attribute to generate the proper third
18522 # character in the <ESC>0 sequence. The <sgr> string implements the following
18525 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
18526 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
18528 # Where: P1 <==> Standout attribute parameter
18529 # P2 <==> Underline attribute parameter
18530 # P3 <==> Reverse attribute parameter
18531 # P4 <==> Blink attribute parameter
18532 # P5 <==> Dim attribute parameter
18533 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
18534 ncr7900i|ncr7900|n7900|ncr 7900 model 1,
18536 cols#80, lines#24, xmc#1,
18537 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18538 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
18539 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
18540 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
18542 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18544 sgr0=\E0@, smso=\E0Q, smul=\E0`,
18545 ncr7900iv|ncr 7900 model 4,
18548 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
18549 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
18550 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
18551 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
18552 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
18553 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
18554 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
18555 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
18556 # The user can enter a CTRL-B to get out of this locked state.
18557 # In <hpa>, we want to output the character given by the formula:
18558 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
18559 ncr7901|ncr 7901 model,
18562 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
18563 cub1=^H, cud1=\n, cuf1=^F,
18564 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
18566 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
18567 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
18568 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
18569 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18571 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
18572 vpa=\013%p1%{64}%+%c,
18574 # Newbury Data Recording Limited (Newbury Data)
18576 # Have been manufacturing and reselling various peripherals for a long time
18577 # They don't make terminals anymore, but are still in business (in 2007).
18578 # Their e-mail address is at ndsales@newburydata.co.uk
18579 # and their post address is:
18581 # Newbury Data Recording Ltd,
18582 # Premier Park, Road One,
18583 # Winsford, Cheshire, CW7 3PT
18585 # Their technical support is still good, they sent me for free a printed copy
18586 # of the 9500 user manual and I got it just 1 week after I first contacted them
18590 # Manufactured in the early/mid eighties, behaves almost the same as a
18591 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
18592 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
18593 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
18594 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
18595 # recognized: if you type in "ESC !", the next (third) character is not
18596 # echoed, showing that the terminal was actually waiting for a parameter!
18597 ndr9500|nd9500|Newbury Data 9500,
18598 am, bw, hs, mc5i, mir, msgr, ul, xon,
18599 cols#80, lines#24, wsl#79,
18600 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
18601 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
18602 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18603 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
18604 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
18605 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
18606 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
18607 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
18608 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18609 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
18610 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
18611 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18612 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18613 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
18614 pfloc=\E|%{48}%p1%+%c2%p2\031,
18615 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
18616 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
18617 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
18618 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
18619 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
18621 ndr9500-nl|NDR 9500 with no status line,
18624 dsl@, fsl@, tsl@, use=ndr9500,
18626 ndr9500-25|NDR 9500 with 25th line enabled,
18627 lines#25, use=ndr9500,
18629 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
18630 lines#25, use=ndr9500-nl,
18632 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
18635 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
18636 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
18637 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
18638 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
18640 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
18641 lines#25, use=ndr9500-mc,
18643 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
18646 dsl@, fsl@, tsl@, use=ndr9500-mc,
18648 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
18649 lines#25, use=ndr9500-mc-nl,
18651 #### Perkin-Elmer (Owl)
18653 # These are official terminfo entries from within Perkin-Elmer.
18656 bantam|pe550|pe6100|perkin elmer 550,
18659 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18660 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18661 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
18662 fox|pe1100|perkin elmer 1100,
18665 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18666 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18667 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
18668 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
18669 owl|pe1200|perkin elmer 1200,
18672 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18673 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18674 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
18675 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
18676 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
18677 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
18678 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
18679 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
18680 pe1251|pe6300|pe6312|perkin elmer 1251,
18682 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
18683 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
18684 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18685 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
18686 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
18687 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
18688 # (pe7000m: this had
18689 # rmul=\E!\0, smul=\E!\040,
18690 # which is probably wrong, it collides with kf0
18691 pe7000m|perkin elmer 7000 series monochrome monitor,
18694 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
18695 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
18696 ed=\EJ, el=\EI, home=\EH, ind=\n,
18697 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
18698 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
18699 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
18700 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
18702 pe7000c|perkin elmer 7000 series colour monitor,
18703 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
18704 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
18708 # Sperry Univac has merged with Burroughs to form Unisys.
18711 # This entry is for the Sperry UTS30 terminal running the TTY
18712 # utility under control of CP/M Plus 1R1. The functionality
18713 # provided is comparable to the DEC vt100.
18714 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
18715 uts30|sperry uts30 with cp/m@1R1,
18717 cols#80, lines#24, wsl#40,
18718 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18719 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
18720 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
18721 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18722 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18723 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
18724 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
18725 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
18726 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
18727 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
18728 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
18729 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
18730 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
18731 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
18732 smul=\E[4m, tsl=\E], uc=\EPB,
18736 # Tandem builds these things for use with its line of fault-tolerant
18737 # transaction-processing computers. They aren't generally available
18738 # on the merchant market, and so are fairly uncommon.
18741 tandem6510|adm3a repackaged by Tandem,
18744 # A funny series of terminal that TANDEM uses. The actual model numbers
18745 # have a fourth digit after 653 that designates minor variants. These are
18746 # natively block-mode and rather ugly, but they have a character mode which
18747 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
18748 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18749 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18750 tandem653|t653x|Tandem 653x multipage terminal,
18751 OTbs, am, da, db, hs,
18752 cols#80, lines#24, wsl#64, xmc#1,
18753 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
18754 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18755 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18756 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18758 #### Tandy/Radio Shack
18760 # Tandy has a line of VDTs distinct from its microcomputers.
18763 dmterm|deskmate terminal,
18766 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
18767 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18768 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18769 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18770 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18771 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18772 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18773 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18775 dt100|dt-100|Tandy DT-100 terminal,
18777 cols#80, lines#24, xmc#1,
18778 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18779 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18780 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18781 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18782 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18783 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18784 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18785 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18786 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18787 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18788 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18789 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18790 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18791 cols#132, use=dt100,
18792 dt110|Tandy DT-110 emulating ansi,
18795 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18796 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18797 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18798 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18799 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18800 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
18801 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18802 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18803 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18804 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18805 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18806 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18807 smacs=^N, smso=\E[7m, smul=\E[4m,
18808 pt210|TRS-80 PT-210 printing terminal,
18811 bel=^G, cr=\r, cud1=\n, ind=\n,
18813 #### Tektronix (tek)
18815 # Tektronix tubes are graphics terminals. Most of them use modified
18816 # oscilloscope technology incorporating a long-persistence green phosphor,
18817 # and support vector graphics on a main screen with an attached "dialogue
18818 # area" for interactive text.
18821 tek|tek4012|tektronix 4012,
18824 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
18825 ff=\014$<1000>, is2=\E^O,
18826 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18827 tek4013|tektronix 4013,
18828 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18829 tek4014|tektronix 4014,
18831 is2=\E\017\E9, use=tek4012,
18832 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18833 tek4015|tektronix 4015,
18834 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18835 tek4014-sm|tektronix 4014 in small font,
18836 cols#121, lines#58,
18837 is2=\E\017\E\:, use=tek4014,
18838 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18839 tek4015-sm|tektronix 4015 in small font,
18840 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18841 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18843 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18844 # how to set it for you.
18846 # It's got the Magic Cookie problem around stand-out mode. If you can't
18847 # live with Magic Cookie, remove the :so: and :se: fields and do without
18848 # reverse video. If you like reverse video stand-out mode but don't want
18849 # it to flash, change the letter 'H' to 'P' in the :so: field.
18850 tek4023|tektronix 4023,
18852 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18853 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
18854 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18855 rmso=^_@, smso=^_P,
18856 # It is recommended that you run the 4025 at 4800 baud or less;
18857 # various bugs in the terminal appear at 9600. It wedges at the
18858 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18859 # on keyboard don't work. You have to hit BREAK twice to get
18860 # one break at any speed - this is a documented feature.
18861 # Can't use cursor motion because it's memory relative, and
18862 # because it only works in the workspace, not the monitor.
18863 # Same for home. Likewise, standout only works in the workspace.
18865 # <el> was commented out since vi and rogue seem to work better
18866 # simulating it with lots of spaces!
18868 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18869 # and didn't seem necessary.
18871 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18873 cols#80, it#8, lines#34, lm#0,
18874 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
18875 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18876 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18877 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18878 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18879 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18880 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18882 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18883 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18885 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18886 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18887 tek4025-17|tek 4025 17 line window,
18888 lines#17, use=tek4025,
18889 tek4025-17-ws|tek 4025 17 line window in workspace,
18890 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18891 \r\037wor\s17\r\037mon\s17\r,
18892 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18893 smso=\037att e\r, use=tek4025-17,
18894 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18895 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18896 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18898 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18899 # The following status modes are assumed for normal operation (replace the
18900 # initial "!" by whatever the current command character is):
18901 # !COM 29 # NOTE: changes command character to GS (^])
18907 # ^]STO 9 17 25 33 41 49 57 65 73
18908 # Other modes may be set according to communication requirements.
18909 # If the command character is inadvertently changed, termcap can't restore it.
18910 # Insert-character cannot be made to work on both top and bottom rows.
18911 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18912 # There also seems to be a problem with vertical motion, perhaps involving
18913 # delete/insert-line, following a typed carriage return. This terminal sucks.
18914 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18915 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18916 # work any more. -- esr)
18917 tek4025a|Tektronix 4025A,
18918 OTbs, OTpt, am, bw, da, db, xon,
18919 cols#80, it#8, lines#34,
18920 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18921 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18922 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
18923 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18924 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18925 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18926 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
18927 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18928 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18929 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18930 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18932 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18933 # Here's the command file that I use to get rogue to work on the 4025.
18934 # It should work with any program using the old curses (e.g. it better
18935 # not try to scroll, or cursor addressing won't work. Also, you can't
18937 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18938 tek4025-cr|tek 4025 for curses and rogue,
18940 cols#80, it#8, lines#33,
18941 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
18942 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
18943 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18944 rmcup=\037wor 0, smcup=\037wor 33h,
18945 # next two lines commented out since curses only allows 128 chars, sigh.
18946 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18947 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18948 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18949 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18951 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18952 tek4105|tektronix 4105,
18953 OTbs, am, mir, msgr, ul, xenl, xt,
18954 cols#79, it#8, lines#29,
18955 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18956 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18957 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18958 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18959 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18960 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18961 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18962 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18963 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18964 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18965 smul=\E[=5;<2m, tbc=\E[1g,
18967 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18968 tek4105-30|4015 emulating 30 line vt100,
18969 am, mir, msgr, xenl, xon,
18970 cols#80, it#8, lines#30, vt#3,
18971 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18972 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18973 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18974 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18975 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18976 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18977 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18978 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
18979 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18980 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18981 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18982 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18983 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18984 %;m%?%p9%t\016%e\017%;$<2>,
18985 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18986 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18989 # Tektronix 4105 from BRL
18990 # The following setup modes are assumed for normal operation:
18991 # CODE ansi CRLF no DABUFFER 141
18992 # DAENABLE yes DALINES 30 DAMODE replace
18993 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18994 # FLAGGING input INSERTREPLACE replace LFCR no
18995 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18996 # SELECTCHARSET G1 0 TABS -2
18997 # Other setup modes may be set for operator convenience or communication
18998 # requirements; I recommend
18999 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19000 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19001 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19002 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
19003 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19004 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
19006 # and factory color maps. After setting these modes, save them with NVSAVE. No
19007 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19008 # "IC" cannot be used in combination with "im" & "ei".
19009 # "tek4105a" is just a guess:
19010 tek4105a|Tektronix 4105,
19011 OTbs, OTpt, msgr, xon,
19012 OTkn#8, cols#80, it#8, lines#30, vt#3,
19013 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19014 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19015 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19016 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19017 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19018 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19019 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19020 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19021 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
19022 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19023 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
19024 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
19025 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
19026 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
19027 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19028 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19029 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
19030 \E[?7;8h\E[r\E[m\E>,
19031 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19032 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19035 # Tektronix 4106/4107/4109 from BRL
19036 # The following setup modes are assumed for normal operation:
19037 # CODE ansi COLUMNMODE 80 CRLF no
19038 # DABUFFER 141 DAENABLE yes DALINES 32
19039 # DAMODE replace DAVISIBILITY yes ECHO no
19040 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
19041 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
19042 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
19044 # Other setup modes may be set for operator convenience or communication
19045 # requirements; I recommend
19046 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
19047 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
19048 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
19049 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
19050 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
19051 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
19053 # and factory color maps. After setting these modes, save them with NVSAVE. No
19054 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19055 # "IC" cannot be used in combination with "im" & "ei".
19056 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
19058 cols#80, it#8, lines#32, vt#3,
19059 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
19060 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
19061 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19062 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19063 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19064 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
19065 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19066 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19067 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
19068 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19069 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
19070 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
19071 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
19072 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
19073 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19074 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
19075 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
19076 ;5l\E[?7;8h\E[r\E[m\E>,
19077 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
19078 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
19080 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
19081 # 0 selects Tek mode, i.e., \E%!0
19082 # 1 selects ANSI mode
19083 # 2 selects ANSI edit-mode
19084 # 3 selects VT52 mode
19086 # One odd thing about the description (which has been unchanged since the 90s)
19087 # is that the cursor addressing is using VT52 mode, and a few others use the
19088 # VT52's non-CSI versions of ANSI, e.g., \EJ.
19089 tek4107|tek4109|tektronix terminals 4107 4109,
19090 OTbs, am, mir, msgr, ul, xenl, xt,
19091 cols#79, it#8, lines#29,
19092 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
19093 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
19094 cub1=^H, cud1=\n, cuf1=\EC,
19095 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
19096 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
19097 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19098 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
19099 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
19100 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
19101 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
19102 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
19103 smul=\E%!1\E[4m$<2>\E%!0,
19104 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
19105 # see the note attached to tek4207.
19106 tek4207-s|Tektronix 4207 with sysline but no memory,
19108 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
19109 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19110 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19111 is2=\E7\E[?6l\E[2K\E[?6h\E8,
19112 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
19114 # The 4110 series may be a wonderful graphics series, but they make the 4025
19115 # look good for screen editing. In the dialog area, you can't move the cursor
19116 # off the bottom line. Out of the dialog area, ^K moves it up, but there
19117 # is no way to scroll.
19119 # Note that there is a floppy for free from Tek that makes the
19120 # 4112 emulate the vt52 (use the vt52 termcap). There is also
19121 # an expected enhancement that will use ANSI standard sequences.
19123 # 4112 in non-dialog area pretending to scroll. It really wraps
19124 # but vi is said to work (more or less) in this mode.
19126 # 'vi' works reasonably well with this entry.
19128 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
19131 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
19132 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
19133 # The 4112 with the ANSI compatibility enhancement
19134 tek4112|tek4114|tektronix 4110 series,
19137 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
19138 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
19139 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
19140 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
19141 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19142 tek4112-nd|4112 not in dialog area,
19144 cuu1=^K, use=tek4112,
19145 tek4112-5|4112 in 5 line dialog area,
19146 lines#5, use=tek4112,
19147 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
19148 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
19149 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
19150 # previously \0410 and \0411 sequences...I don't *think* they were supposed
19151 # to be 4-digit octal -- esr)
19152 tek4113|tektronix 4113 color graphics with 5 line dialog area,
19155 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
19156 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
19158 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
19159 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
19161 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
19162 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
19163 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
19164 # :vb: needs enough delay to let you see the background color being toggled.
19165 tek4113-nd|tektronix 4113 color graphics with no dialog area,
19167 cols#80, it#8, lines#34,
19168 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
19170 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
19172 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
19173 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
19174 # This entry is from Tek. Inc. (Brian Biehl)
19175 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
19176 otek4115|Tektronix 4115,
19177 OTbs, am, da, db, eo,
19178 cols#80, it#8, lines#34,
19179 cbt=\E[Z, clear=\E[H\E[2J,
19180 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
19181 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19182 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
19183 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
19185 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
19186 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
19187 kbs=^H, ri=\EM, rmam=\E[?7l,
19188 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
19189 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
19190 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
19192 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
19195 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
19196 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19197 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19198 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
19199 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
19200 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19201 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
19202 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
19203 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
19204 rmso=\E[m, rmul=\E[m,
19205 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
19207 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19208 vpa=\E[%p1%{1}%+%dd,
19209 # The tek4125 emulates a vt100 incorrectly - the scrolling region
19210 # command is ignored. The following entry replaces <csr> with the needed
19211 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
19212 # chokes on; and adds a lot of initialization for the tek dialog area.
19213 # Note that this entry uses all 34 lines and sets the cursor color to green.
19214 # Steve Jacobson 8/85
19215 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
19216 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
19217 tek4125|tektronix 4125,
19219 csr@, dl1=\E[1M, il1=\E[1L,
19220 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
19221 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
19223 rc@, sc@, smkx=\E=, use=vt100+4bsd,
19225 # From: <jcoker@ucbic>
19226 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
19227 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
19228 # note that if jcoker wasn't confused you may be able to use this one.
19229 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
19230 tek4207|Tektronix 4207 graphics terminal with memory,
19231 am, bw, mir, msgr, ul, xenl,
19232 cols#80, it#8, lines#32,
19233 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
19234 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19235 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
19236 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
19237 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
19238 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19239 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19240 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
19241 rev=\E[7m, ri=\E[T,
19242 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
19243 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
19244 smul=\E[4m, tbc=\E[1g,
19246 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
19247 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
19248 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
19249 tek4404|tektronix 4404,
19251 cols#80, it#8, lines#32,
19252 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
19253 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19254 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
19255 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
19256 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
19257 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
19258 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19259 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
19260 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
19261 # Some unknown person wrote:
19262 # I added the is string - straight Unix has ESC ; in the login
19263 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
19264 # mode). The is string here cleans up a few things (but not
19266 ct8500|tektronix ct8500,
19269 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
19270 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
19271 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
19272 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
19273 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
19275 # Tektronix 4205 terminal.
19277 # am is not defined because the wrap around occurs not when the char.
19278 # is placed in the 80'th column, but when we are attempting to type
19279 # the 81'st character on the line. (esr: hmm, this is like the vt100
19280 # version of xenl, perhaps am + xenl would work!)
19282 # Bold, dim, and standout are simulated by colors and thus not allowed
19283 # with colors. The tektronix color table is mapped into the RGB color
19284 # table by setf/setb. All colors are reset to factory specifications by oc.
19285 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
19286 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
19287 # interval then maps into pre-defined value.
19288 tek4205|tektronix 4205,
19290 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
19291 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19292 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
19293 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
19294 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19295 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19296 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
19297 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
19298 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
19300 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
19301 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
19302 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
19303 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
19304 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
19305 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
19306 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
19307 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
19308 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
19310 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
19311 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
19312 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
19314 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
19316 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
19317 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
19318 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19319 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19321 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19322 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19324 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
19325 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19326 smul=\E[4m, tbc=\E[1g,
19328 #### Teletype (tty)
19330 # These are the hardcopy Teletypes from before AT&T bought the company,
19331 # clattering electromechanical dinosaurs in Bakelite cases that printed on
19332 # pulpy yellow roll paper. If you remember these you go back a ways.
19333 # Teletype-branded VDTs are listed in the AT&T section.
19335 # The earliest UNIXes were designed to use these clunkers; nroff and a few
19336 # other programs still default to emitting codes for the Model 37.
19339 tty33|tty35|model 33 or 35 teletype,
19342 bel=^G, cr=\r, cud1=\n, ind=\n,
19343 tty37|model 37 teletype,
19345 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
19348 # There are known to be at least three flavors of the tty40, all seem more
19349 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
19350 # awful braindamage, such as printing a visible newline indicator after each
19351 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
19352 # braindamaged but has hope and is described here. The 40-4 is a 3270
19353 # lookalike and beyond hope. The terminal has visible bell but I don't know
19354 # it - it's null here to prevent it from showing the BL character.
19355 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
19356 # a "newline" style terminal (-crmode) vi figures all it needs is nl
19357 # to get crlf, even if <cr> is not ^M.)
19358 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
19359 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
19362 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
19363 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
19364 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
19365 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
19366 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
19367 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
19368 tty43|model 43 teletype,
19369 OTbs, am, hc, os, xon,
19371 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
19376 # You can add <is2=\E<> to put this 40-column mode, though I can't
19377 # for the life of me think why anyone would want to.
19378 scanset|sc410|sc415|Tymshare Scan Set,
19381 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
19382 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19383 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
19384 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
19385 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
19387 #### Volker-Craig (vc)
19389 # If you saw a Byte Magazine cover with a terminal on it during the early
19390 # 1980s, it was probably one of these. Carl Helmers liked them because
19391 # they could crank 19.2 and were cheap (that is, he liked them until he tried
19392 # to program one...)
19395 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
19396 # every other linefeed.
19397 vc303|vc103|vc203|volker-craig 303,
19400 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19401 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
19402 kcuu1=^N, ll=\017$<1>W,
19403 vc303a|vc403a|volker-craig 303a,
19404 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
19405 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
19406 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
19407 vc404|volker-craig 404,
19410 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19411 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19412 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
19413 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
19414 vc404-s|volker-craig 404 w/standout mode,
19415 cud1=\n, rmso=^O, smso=^N, use=vc404,
19416 # From: <wolfgang@cs.sfu.ca>
19417 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
19418 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
19421 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
19422 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
19423 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
19424 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
19425 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
19426 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
19427 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
19428 rmso=\E^_, smso=\E^Y,
19429 vc415|volker-craig 415,
19430 clear=^L, use=vc404,
19432 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
19435 #### IBM PC and clones
19438 # The pcplot IBM-PC terminal emulation program is really messed up. It is
19439 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
19440 # doesn't support scrolling regions, ignores add line commands, and ignores
19441 # delete line commands. Consequently, the resulting behavior looks like a
19442 # crude adm3a-type terminal.
19443 # Steve Jacobson 8/85
19444 pcplot|pc-plot terminal emulation program,
19446 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
19447 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
19448 # I've found that my KayPro II, running MDM730, continues to emulate an
19449 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
19450 # system the following termcap entry works well:
19451 # I have noticed a couple of minor glitches, but nothing I can't work
19452 # around. (I added two capabilities from the BRL entry -- esr)
19453 kaypro|kaypro2|kaypro II,
19456 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
19457 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
19458 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
19460 # From IBM, Thu May 5 19:35:27 1983
19461 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
19462 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
19465 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
19466 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
19468 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
19469 OTbs, am, bw, eo, hs, km, msgr, ul,
19470 cols#80, it#8, lines#24,
19471 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
19473 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
19474 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19475 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19476 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
19477 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
19478 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
19479 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19480 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
19481 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
19482 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
19483 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
19484 rmso=\E[m, rmul=\E[m,
19485 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
19487 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19491 # Apple II firmware console first, then various 80-column cards and
19492 # terminal emulators. For two cents I'd toss all these in the UFO file
19493 # along with the 40-column apple entries.
19496 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
19497 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
19498 # function of TIC, not the firmware.
19499 # The clear key on a IIgs will do something like clear-screen,
19500 # depending on what you're in.
19501 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
19502 OTbs, am, bw, eo, msgr,
19503 cols#80, it#8, lines#24,
19504 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
19505 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19506 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
19507 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
19509 # Apple //e with 80-column card, entry from BRL
19510 # The modem interface is permitted to discard LF (maybe DC1), otherwise
19511 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
19512 # Auto-wrap does not work right due to newline scrolling delay, which also
19513 # requires that you set "stty cr2".
19514 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
19515 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
19516 # using a terminal emulation program instead of the built-in firmware.
19520 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
19521 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
19522 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
19523 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19525 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
19526 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
19527 apple2e-p|Apple //e via Pascal,
19528 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
19529 kcud1=\n, use=apple2e,
19530 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
19531 # Enable DC3/DC1 flow control with "stty ixon -ixany".
19532 apple-ae|ASCII Express,
19533 OTbs, am, bw, msgr, nxon, xon,
19534 cols#80, it#8, lines#24,
19535 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19536 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19537 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
19538 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19540 appleII|apple ii plus,
19542 cols#80, it#8, lines#24,
19543 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
19544 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
19545 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
19546 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
19547 # Originally by Gary Ford 21NOV83
19548 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
19549 apple-80|apple II with smarterm 80 col,
19552 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
19553 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
19554 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
19555 apple-soroc|apple emulating soroc 120,
19558 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19559 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
19560 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19561 # From Peter Harrison, Computer Graphics Lab, San Francisco
19562 # ucbvax!ucsfmis!harrison .....uucp
19563 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
19564 # "These two work. If you don't have the inverse video chip for the
19565 # Apple with videx then remove the :so: and :se: fields."
19566 # (apple-videx: this used to be called DaleApple -- esr)
19567 apple-videx|Apple with videx videoterm 80 column board with inverse video,
19569 cols#80, it#8, lines#24,
19570 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
19571 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19572 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
19573 rmso=^Z2, sgr0=^Z2, smso=^Z3,
19574 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
19575 # Apple Cat ][ 212 modem, + more all
19576 # controlled by ASCII Express: Pro.
19577 # From Dave Shaver <isucs1!shaver>
19578 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
19581 acsc=, clear=^L, cuf1=^\,
19582 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19583 flash=^W35^W06, home=^Y,
19584 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
19586 apple-uterm|Ultraterm for Apple micros,
19589 acsc=, clear=^L, cuf1=^\,
19590 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19591 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
19592 # from trwrba!bwong (Bradley W. Wong):
19594 # This entry assumes that you are using an apple with the UCSD Pascal
19595 # language card. SYSTEM.MISCINFO is assumed to be the same as that
19596 # supplied with the standard apple except that screenwidth should be set
19597 # using SETUP to 80 columns. Note that the right arrow is not mapped in
19598 # this termcap entry. This is because that key, on the Apple, transmits
19599 # a ^U and would thus preempt the more useful "up" function of vi.
19602 apple80p|80-column apple with Pascal card,
19605 clear=^Y^L, cuf1=^\\:,
19606 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19609 # Apple II+ equipped with Videx 80 column card
19611 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
19612 # manually converted by D A Gwyn
19614 # DO NOT use any terminal emulation with this data base, it works directly
19615 # with the Videx card. This has been tested with vi 1200 baud and works fine.
19617 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
19618 # 1 screen, while in R2 ^U doesn't.
19619 # For inverse alternate character set add:
19620 # <smacs>=^O:<rmacs>=^N:
19621 # (apple-v: added it#8 -- esr)
19622 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
19624 cols#80, it#8, lines#24,
19625 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
19626 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
19627 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
19628 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
19629 khome=^Y, rmso=^Z2, smso=^Z3,
19630 apple-videx3|vapple|Apple II with 80 col card,
19633 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
19634 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
19635 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19636 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
19637 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
19638 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
19639 aepro|Apple II+ running ASCII Express Pro--vt52,
19642 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
19643 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19645 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
19646 apple-vm80|ap-vm80|apple with viewmax-80,
19649 clear=\014$<300/>, cuf1=^\\:,
19650 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
19651 ed=\013$<300/>, el=^], home=\031$<200/>,
19653 #### Apple Lisa & Macintosh
19656 # (lisa: changed <cvvis> to <cnorm> -- esr)
19657 lisa|apple lisa console display (black on white),
19658 OTbs, am, eo, msgr,
19659 cols#88, it#8, lines#32,
19660 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
19661 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
19662 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19663 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
19664 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19665 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
19666 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
19667 liswb|apple lisa console display (white on black),
19668 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
19669 smso=\E[m, smul=\E[4m, use=lisa,
19671 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
19672 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
19674 # These entries assume that the 'Auto Wraparound' is enabled.
19675 # Xon-Xoff flow control should also be enabled.
19677 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
19678 # settings are in non-volatile memory and don't need to be reset upon login.
19679 # Also setting the number of columns glitches the screen annoyingly.
19680 # You can type "reset" to get them set.
19682 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
19683 OTbs, OTpt, am, xenl, xon,
19684 OTkn#4, cols#80, it#8, lines#24, vt#3,
19685 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
19686 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19687 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
19688 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19689 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
19690 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
19691 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
19692 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19693 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
19694 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19696 # Lisaterm in 132 column ("wide") mode.
19697 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
19699 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
19700 # Although MacTerminal has insert/delete line, it is commented out here
19701 # since it is much faster and cleaner to use the "lock scrolling region"
19702 # method of inserting and deleting lines due to the MacTerminal implementation.
19703 # Also, the "Insert/delete ch" strings have an extra character appended to them
19704 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
19705 # supported by MacTerminal.
19706 mac|macintosh|Macintosh with MacTerminal,
19709 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
19710 # Lisaterm in 132 column ("wide") mode.
19711 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
19714 #### Radio Shack/Tandy
19717 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
19718 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
19719 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
19720 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
19722 cols#80, it#8, lines#24,
19723 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
19724 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
19725 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
19726 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
19727 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
19728 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
19729 # (trs2: removed obsolete ":nl=^_:" -- esr)
19730 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
19732 cols#80, it#8, lines#24,
19733 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
19734 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
19735 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
19736 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
19737 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
19738 # (This had extension capabilities
19739 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
19740 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
19741 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
19742 trs16|trs-80 model 16 console,
19744 cols#80, it#8, lines#24,
19745 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
19746 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19747 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19748 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19749 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19750 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19751 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19752 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19753 smacs=\ERG, smso=\ERD,
19755 #### Commodore Business Machines
19757 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19758 # after years of shaky engineering and egregious mismanagement. Made one
19759 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19760 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19761 # ever (most units sold); they can still be found gathering dust in closets
19765 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19766 # Added a few more entries, converted caret-type control sequence (^x) entries
19767 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19768 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19770 # :as:, :ae: Support for alternate character sets.
19771 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19772 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19773 # This one appears to fix a problem I always had with a line ending
19774 # at 'width+1' (I think) followed by a blank line in vi. The blank
19775 # line tended to disappear and reappear depending on how the screen
19776 # was refreshed. Note that this is probably needed only if you use
19777 # something like a Dnet Fterm with the window sized to some peculiar
19778 # dimension larger than 80 columns.
19779 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19780 # (amiga: removed obsolete :kn#10:,
19781 # also added empty <acsc> to suppress a warning --esr)
19783 OTbs, am, bw, xenl,
19785 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19786 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19787 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19788 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19789 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19790 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19791 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19792 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19793 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19794 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19795 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19796 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19797 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19799 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19800 # (amiga: added empty <acsc> to suppress a warning.
19801 # I'm told this entry screws up badly with AS225, the Amiga
19802 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19803 amiga-h|Hans Verkuil's Amiga ANSI,
19806 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19807 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
19808 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19809 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19810 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19811 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19812 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19813 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19814 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19815 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19816 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19817 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19818 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19819 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19820 smso=\2337m, smul=\2334m,
19822 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19824 # Pavel Fedin added
19829 amiga-8bit|Amiga ANSI using 8-bit controls,
19830 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19831 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19832 kpp=\233T, ri=\215, rin@, use=amiga-h,
19834 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19835 # requires use of appropriate preferences settings.
19836 amiga-vnc|Amiga using VNC console (black on light gray),
19837 am, da, db, msgr, ndscr,
19838 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
19839 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19840 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
19841 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19842 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19843 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19844 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19845 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19846 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19847 indn=\E[%p1%dS, invis=\E8m,
19848 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19849 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19850 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19851 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19852 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19853 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19854 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19855 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19856 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19857 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19858 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19859 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19860 smso=\E[1m, smul=\E[4m,
19862 # MorphOS on Genesi Pegasos
19863 # By Pavel Fedin <sonic_amiga@rambler.ru>
19864 morphos|MorphOS on Genesi Pegasos,
19865 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19866 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19867 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19868 ri=\215, rin@, use=amiga-h,
19870 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19871 # I'm trying to write a termcap for a commodore b-128, and I'm
19872 # having a little trouble. I've had to map most of my control characters
19873 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19874 # and create some functions (like cm), but thats life.
19875 # The problem is with the arrow keys - right, and up work fine, but
19876 # left deletes the previous character and down I just can't figure out.
19877 # Jove knows what I want, but I don't know what it's sending to me (it
19878 # isn't thats bound to next-line in jove).
19879 # Anybody got any ideas? Here's my termcap.
19880 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19882 commodore|b-128|Commodore B-128 micro,
19884 OTdN#20, cols#80, lines#24, pb#150,
19885 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
19886 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19887 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19888 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19889 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19894 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19895 northstar|North Star Advantage,
19899 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19900 el=\016$<200/>, home=\034\032$<200/>,
19904 # Thu Jul 7 03:55:16 1983
19906 # As an aside, be careful; it may sound like an anomaly on the
19907 # Osborne, but with the 80-column upgrade, it's too easy to
19908 # enter lines >80 columns!
19910 # I've already had several comments...
19911 # The Osborne-1 with the 80-col option is capable of being
19912 # 52, 80, or 104 characters wide; default to 80 for compatibility
19913 # with most systems.
19915 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19916 osborne-w|osborne1-w|osborne I in 104-column mode,
19918 cols#104, lines#24,
19919 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19920 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19921 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
19922 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19923 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19924 osborne|osborne1|osborne I in 80-column mode,
19925 OTbs, am, mir, msgr, ul, xhp,
19926 OTdB#4, cols#80, lines#24,
19927 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
19928 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19929 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19930 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19931 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19933 # Osborne Executive definition from BRL
19934 # Similar to tvi920
19935 # Added by David Milligan and Tom Smith (SMU)
19936 osexec|Osborne executive,
19938 OTug#1, cols#80, lines#24, xmc#1,
19939 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19940 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19941 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19942 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
19943 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19944 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19945 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19948 #### Console types for obsolete UNIX clones
19950 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19951 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19952 # were commercial, Minix an educational tool sold in conjunction with a book.
19953 # Memory-segmentation limits and a strong tendency to look like V7 long after
19954 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19955 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19956 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19957 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19958 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19959 # even as single processes under SunOS and the Macintosh OS.
19963 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19964 minix|minix console (v3),
19965 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19966 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19967 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19968 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19969 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19970 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19971 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19972 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19973 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19974 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19975 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19976 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19977 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19978 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19979 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19980 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19983 minix-3.0|minix console (v3.0),
19984 use=ecma+color, use=minix-1.7,
19987 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19988 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19989 minix-1.7|minix console (v1.7),
19991 cols#80, it#8, lines#25,
19992 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19993 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19994 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19995 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19996 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19997 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19998 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19999 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
20000 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
20001 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
20002 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
20003 smso=\E[7m, smul=\E[4m,
20004 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
20005 minix-old|minix-1.5|minix console (v1.5),
20007 cols#80, it#8, lines#25,
20008 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
20009 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
20010 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20011 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20012 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
20013 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
20014 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20015 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
20016 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
20017 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
20018 # The linewrap option can be specified by editing /usr/include/minix/config.h
20019 # before recompiling the minix 1.5 kernel.
20020 minix-old-am|minix console with linewrap,
20023 pc-minix|minix console on an Intel box,
20024 use=klone+acs, use=minix-3.0,
20026 # According to the Coherent 2.3 manual, the PC console is similar
20027 # to a z19. The differences seem to be (1) 25 lines, (2) no status
20028 # line, (3) standout is broken, (4) ins/del line is broken, (5)
20029 # has blinking and bold.
20030 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
20032 cols#80, it#8, lines#25,
20033 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20034 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
20035 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
20036 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
20037 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
20039 # According to the Venix 1.1 manual, the PC console is similar
20040 # to a DEC vt52. Differences seem to be (1) arrow keys send
20041 # different strings, (2) enhanced standout, (3) added insert/delete line.
20042 # Note in particular that it doesn't have automatic margins.
20043 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
20044 # not described here because this derives from an old termcap entry.
20045 pc-venix|venix|IBM PC console running Venix,
20046 cols#80, it#8, lines#25,
20047 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20048 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
20049 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
20050 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
20052 #### Miscellaneous microcomputer consoles
20054 # If you know anything more about any of these, please tell me.
20057 # The MAI Basic Four computer was obsolete at the end of the 1980s.
20058 # It may be used as a terminal by putting it in "line" mode as seen on
20059 # one of the status lines.
20060 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
20061 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
20062 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
20063 # used \ED instead.
20064 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
20065 mai|basic4|MAI Basic Four in ansi mode,
20066 am, da, db, mir, msgr,
20067 cols#82, it#8, lines#25,
20068 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
20069 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
20070 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
20071 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
20072 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
20073 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
20074 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
20075 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20076 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
20077 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20078 smir=\E[4h, smso=\E[7m, smul=\E[4m,
20079 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
20080 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
20082 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
20083 # The Basis 108 was a Apple II clone, manufactured by the "Basis
20084 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
20085 # about 1,5 km from where I live, but doesn't build own computers any
20086 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
20087 # equipped with one or two 5.25" disk drives, had a monochrome and colour
20088 # video output for a TV set or a dedicated monitor and several slots for
20089 # Apple II cards. Basis 108 were quite popular at german schools before
20090 # the advent of the IBM PC. They run, for example, the UCSD Pascal
20091 # development system (which I used even in 1993 to program the steering
20092 # and data recording for our school's experimental solar panel :), Apple DOS
20094 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
20095 basis|BASIS108 computer with terminal translation table active,
20096 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
20097 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
20098 smso=\E(, use=adm3a,
20099 # luna's BMC terminal emulator
20100 luna|luna68k|LUNA68K Bitmap console,
20101 cols#88, lines#46, use=ansi-mini,
20102 megatek|pegasus workstation terminal emulator,
20105 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
20106 # interface (pre-Macintosh by several years) that went nowhere.
20107 xerox820|x820|Xerox 820,
20110 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
20111 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
20114 #### Videotex and teletext
20117 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
20118 # \E[?3l 80 columns
20119 # \E[?4l scrolling on
20120 # \E[12h local echo off
20121 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
20122 # \E)0 G1 DEC set (line graphics)
20124 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
20125 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
20126 OTbs, eslok, hs, xenl,
20127 cols#80, it#8, lines#24, wsl#72, xmc#0,
20128 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
20129 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
20130 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
20131 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
20132 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20133 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20134 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
20135 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
20136 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
20137 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
20138 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
20139 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
20140 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
20141 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
20142 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20143 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
20144 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
20145 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
20146 u6=\E[%i%d;%dR, u7=\E[6n,
20148 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
20150 minitel1|minitel 1,
20151 am, bw, eslok, hs, hz, .msgr, G0,
20152 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
20153 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
20154 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20155 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
20156 dsl=\037@A\030\n, el=^X,
20157 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
20158 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
20159 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
20160 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
20161 rev=\E], ri=^K, rmso=\E\\,
20162 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
20163 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
20164 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
20166 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
20167 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
20168 %tC%e%p1%'@'%+%c%;,
20169 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
20170 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
20171 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
20172 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
20173 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
20174 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
20176 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
20177 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
20178 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
20179 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
20180 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
20181 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
20182 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
20183 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
20184 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
20185 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
20186 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
20187 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
20188 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
20190 minitel1b|minitel 1-bistandard (in 40cols mode),
20192 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
20193 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
20194 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
20195 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
20196 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
20197 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
20198 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
20199 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
20200 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
20201 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
20202 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
20203 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
20204 rmir=\E[4l, smir=\E[4h,
20205 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
20206 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
20207 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
20208 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
20210 # rmkx posait des problemes (logout en sortant de vi).
20211 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
20212 am@, bw@, eslok@, hz@, msgr, G0,
20213 colors@, cols#80, it#8, pairs@,
20214 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
20215 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
20216 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
20217 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
20218 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
20219 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
20220 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
20221 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
20222 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
20223 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
20224 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
20226 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
20227 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
20228 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
20229 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
20231 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
20232 smso=\E[7m, smul=\E[4m,
20233 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
20234 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
20235 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
20236 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
20238 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
20239 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
20240 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
20242 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
20244 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
20245 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
20246 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
20247 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
20248 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
20249 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
20250 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
20251 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
20252 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
20253 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
20256 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
20258 bold=\EG, clear=^L\EB,
20259 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
20260 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
20261 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20262 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
20265 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
20268 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
20269 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
20270 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
20271 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
20272 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
20274 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20275 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
20276 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
20277 .u8=\001Cu|\004r, use=minitel1b,
20281 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
20283 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
20284 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
20285 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
20287 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
20288 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
20289 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
20290 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
20292 # Fonctionne par exemple avec Midnight Commander (mc).
20294 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
20296 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
20297 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
20298 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
20300 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20301 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
20302 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
20303 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
20304 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
20305 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
20306 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
20307 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
20308 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
20309 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
20310 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
20311 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
20312 \,+k\,.l\,0\177\,-j,
20315 minitel12-80|minitel 12 (80cols),
20317 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
20319 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
20321 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
20323 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
20324 E0=^O, S0=\E)3\016,
20325 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20326 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
20327 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
20328 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
20329 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
20330 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
20331 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
20332 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
20333 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
20334 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
20335 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
20336 \,\\\,m\,+k\,.l\,0\177\,-j,
20340 # Add these in your ~/.screenrc for inputting some special glyphs like french
20341 # accentuated chars in 40 cols mode:
20343 # bindkey ^YA digraph '`' # Saisi accent grave.
20344 # bindkey ^YB digraph "'" # Saisi accent aigu.
20345 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
20346 # bindkey ^YH digraph '"' # Saisi accent trema.
20348 # bindkey ^Y# stuff \243 # Livre.
20349 # bindkey "^Y\047" stuff \247 # Paragraphe.
20350 # bindkey ^Yj stuff \306 # AE
20351 # bindkey ^Yz stuff \346 # ae
20352 # bindkey ^YKc stuff \347 # c cedille.
20355 screen.minitel1|Screen specific for minitel1,
20357 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
20359 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
20360 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20361 use=xterm+x11mouse, use=screen,
20363 screen.minitel1b|Screen specific for minitel1b,
20364 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
20365 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
20366 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
20367 use=screen.minitel1,
20369 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
20370 colors@, ncv@, pairs@,
20371 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
20372 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
20373 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
20374 use=screen.minitel1b,
20376 screen.minitel1-nb|Screen specific for minitel1-nb,
20377 colors@, ncv@, pairs@,
20378 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20379 use=screen.minitel1,
20381 screen.minitel1b-nb|Screen specific for minitel1b-nb,
20382 colors@, ncv@, pairs@,
20383 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20384 use=screen.minitel1b,
20386 # From: Alexandre Montaron, 29 Sep 2016
20388 linux-m1|Linux Minitel 1 "like" Couleurs,
20389 am, bw@, ccc, mir, msgr, xenl,
20390 colors#8, it#8, ncv#16, pairs#64,
20391 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
20392 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
20393 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20394 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20395 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20396 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
20397 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20398 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
20399 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
20400 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
20401 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
20403 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
20404 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
20405 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
20406 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
20407 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20408 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20409 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
20410 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20411 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
20412 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
20413 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20414 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
20415 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
20416 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
20417 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
20418 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
20419 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
20420 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
20421 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
20423 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20424 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20425 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20426 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20427 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20428 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20429 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20430 \n\n\n\n\n\n\n\n\n\n,
20432 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
20433 # 2. Native brown color corrected to good yellow color.
20434 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
20435 # 4. Suppressed nonexistent underlined mode (normally as bright).
20436 # 5. ich/ich1 not filled because of non-curses programs.
20438 # 6. Suppressed nonexistent invisible mode.
20439 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
20441 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
20443 colors@, ncv@, pairs@,
20444 acsc@, bold=\E[33m, enacs@, initc@,
20445 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
20446 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
20447 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20448 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
20449 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
20450 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
20451 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20454 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
20456 colors@, ncv@, pairs@,
20457 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20458 uvvwwxxyyzz{{||}}~~,
20459 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
20460 enacs=\E)0, initc@,
20461 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
20462 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
20463 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
20465 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
20467 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
20468 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
20469 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
20470 \E]PFFFFFFF\E[;37m,
20473 # Screen entries counterpart :
20475 screen.linux-m1|Linux m1 specific for screen,
20477 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
20478 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
20479 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
20480 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20481 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20482 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20483 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20484 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20485 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20486 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20487 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20488 \n\n\n\n\n\n\n\n\n\n,
20489 use=xterm+x11mouse, use=screen,
20491 screen.linux-m1b|Linux m1b specific for screen,
20493 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
20495 screen.linux-m2|Linux m2 specific for screen,
20496 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20497 uvvwwxxyyzz{{||}}~~,
20498 use=screen.linux-m1b,
20502 putty-m1|Putty Minitel 1 "like" Couleurs,
20504 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20505 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20506 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20507 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20508 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
20510 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
20512 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20513 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20514 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20515 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20516 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
20518 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
20520 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
20522 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20523 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20524 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20525 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20526 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
20529 screen.putty-m1|Putty m1 specific for screen,
20530 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
20532 screen.putty-m1b|Putty m1b specific for screen,
20534 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
20536 screen.putty-m2|Putty m2 specific for screen,
20537 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20538 uvvwwxxyyzz{{||}}~~,
20539 use=screen.putty-m1b,
20540 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
20543 # viewdata lacks a true cup capability,
20544 # so I achieved it with home and cud1/cuf1 sequences only !
20545 viewdata|prestel/viewdata terminals,
20548 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
20550 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
20551 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
20552 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
20553 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
20554 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
20555 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
20556 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
20558 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
20559 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
20561 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
20562 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
20563 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
20564 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
20565 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
20566 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
20567 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
20568 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
20569 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
20570 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
20571 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
20572 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
20573 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
20574 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
20575 .ll=^^^K, use=viewdata,
20577 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
20579 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
20581 rmso=\EG, smso=\EB, use=viewdata-o,
20583 ######## OBSOLETE VDT TYPES
20585 # These terminals are *long* dead -- these entries are retained for
20586 # historical interest only.
20588 #### Amtek Business Machines
20591 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
20592 # but these caps were commented out in 8.3; also, removed overridden
20593 # ":do=^J:" -- esr)
20594 abm80|amtek business machines 80,
20597 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
20598 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
20599 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
20601 #### Bell Labs blit terminals
20603 # These were AT&T's official entries. The 5620 FAQ maintained by
20604 # David Breneman <daveb@dgtl.com> has this to say:
20606 # Actually, in the beginning was the Jerq, and the Jerq was white with a
20607 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
20608 # was good. But lo, upon the horizon loomed a mighty management-type person
20609 # (known now only by the initials VP) who said, the mighty Jerq must stay
20610 # alone, and could not go forth into the world. So Locanthi and Pike put the
20611 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
20612 # world. And the Jerq lived the rest of its days in research, but never
20613 # strayed from those paths.
20615 # In all seriousness, the Blit was originally known as the Jerq, but when
20616 # it started to be shown outside of the halls of the Bell Labs Research
20617 # organization, the management powers that be decided that the name could
20618 # not remain. So it was renamed to be Blit. This was in late 1981.
20620 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
20624 blit|jerq|blit running teletype rom,
20626 cols#87, it#8, lines#72,
20627 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20628 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
20629 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
20630 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
20631 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
20632 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
20634 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
20635 cbblit|fixterm|blit running columbus code,
20637 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
20638 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
20639 smul=\EU", use=blit,
20641 oblit|ojerq|first version of blit rom,
20642 am, da, db, eo, mir, ul, xon,
20643 cols#88, it#8, lines#72,
20644 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20645 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
20646 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
20647 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
20650 #### Bolt, Beranek & Newman (bbn)
20652 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
20653 # The parent company, best known as the architects of the Internet, is
20656 # Jeff DelPapa <dp@world.std.com> writes:
20657 # The bitgraph was a large white box that contained a monochrome bitmap
20658 # display, and a 68000 to run it. You could download code and run it on
20659 # the cpu, it had 128kb (I think) of memory. I used one in the late
20660 # 70's, sure beat a vt100. It had one strange feature tho -- it used
20661 # the cpu to bitblt pixels to scroll, it took longer than the refresh
20662 # rate, and looked like a rubber sheet stretching, then snapping
20663 # upwards. It had everything the early mac had, except a floppy drive a
20664 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
20665 # Beranek and Neuman) sold at most a few hundred of them to the real
20666 # world. DOD may have bought more...
20669 # Entries for the BitGraph terminals. The problem
20670 # with scrolling in vi can only be fixed by getting BBN to put
20671 # smarter scroll logic in the terminal or changing vi or padding
20672 # scrolls with about 500 ms delay.
20674 # I always thought the problem was related to the terminal
20675 # counting newlines in its input buffer before scrolling and
20676 # then moving the screen that much. Then vi comes along and
20677 # paints lines in on the bottom line of the screen, so you get
20678 # this big white gap.
20680 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
20681 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20683 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
20684 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20686 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
20689 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
20690 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
20691 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
20692 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
20693 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20694 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
20695 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
20696 sgr0=\E[m, smkx=\E=, smso=\E[7m,
20698 bg1.25rv|bbn bitgraph 1.25 (reverse video),
20699 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20701 bg1.25nv|bbn bitgraph 1.25 (normal video),
20702 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20704 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
20705 bg1.25|bbn bitgraph 1.25,
20707 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
20708 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
20709 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
20710 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
20711 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
20712 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
20713 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
20716 #### Bull (bq, dku, vip)
20718 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
20720 #============================================#
20721 # BULL QUESTAR 210 `SDP' terminals emulation #
20722 #============================================#
20724 # Description written by R.K.Saunders (Bull Transac)
20726 # Modifications written by F. Girard (Bull MTS)
20727 # 19-05-87 V02.00.01
20728 # 17-12-87 V02.00.02
20729 # 15-09-89 V02.00.05
20731 # Typical technical selections F1 (modes SDP/ROLL):
20732 # -------------------------------------------------------
20733 # | 01 02 03 04 05 06 07 08 09 10 |
20734 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
20736 # | 11 12 13 14 15 16 17 18 19 20 |
20737 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
20739 # | 21 22 23 24 25 26 27 28 29 30 |
20740 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
20742 # | 31 32 33 34 35 36 37 38 39 40 |
20743 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
20744 # -------------------------------------------------------
20745 # Typical firmware identification F5 "etat 6":
20746 # P287.02.04b (AZERTY)
20747 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20748 # P298.03.03 (monochrome) or P374.03.02 (colour)
20750 # SM SDP mode (VIP command): ^[[?=h
20751 # RIS (erases screen): ^[c
20752 # DMI disable keyboard: ^[`
20753 # SM double rendition mode: ^[[?>h
20754 # RM solicited status mode: ^[[5l
20755 # RM character mode: ^[[>l
20756 # RM echoplex mode: ^[[12l
20757 # RM column tab mode: ^[[18l
20758 # RM forbid SS2 keyboard mode: ^[[?<l
20759 # SM scroll mode: ^[[=h
20760 # FCF enable XON/XOFF: ^[P1s^[\
20761 # MTL select end msg character: ^[[^Wp
20762 # EMI enable keyboard: ^[b
20763 # RIS retour etat initial: ^[c
20764 # enable FC keypad: ^[[?<h,
20765 # MPW map status line window: ^[PY99:98^[\
20766 # SCP select status line: ^[[0;98v
20767 # ED erase entire partition: ^[[2J
20768 # SCP select main partition: ^[[v
20769 # SM character insertion mode: ^[[4h
20770 # RM character replacement mode: ^[[4l
20771 # COO cursor on: ^[[r
20772 # COO cursor off: ^[[1r
20773 # SGR dim (turquoise) rev attr: ^[[2;7m
20774 # SGR Data normal attr: ^[[m
20775 # SO Line-graphic mode ON: ^N
20776 # SI Line-graphic mode OFF: ^O
20777 # MC start routing to printer: ^[[5i
20778 # MC stop routing to printer: ^M^[[4i
20781 # This entry covers the following terminals:
20782 # dku7102, tws2102, and tws models 2105 to 2112
20783 tws-generic|dku7102|Bull Questar tws terminals,
20784 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20785 cols#80, it#8, lines#24, wsl#80,
20786 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20787 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20788 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20789 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20790 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20791 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20792 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20793 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20794 il1=\E[L, ind=\n, invis=\E[0;8m,
20795 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20796 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20797 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20798 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20799 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20800 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20801 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20802 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20803 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20804 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20805 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20806 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20807 %p7%t;8%;m%?%p9%t\016%e\017%;,
20808 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20809 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20810 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20811 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20812 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20814 tws2103|xdku|BULL Questar tws2103,
20815 ht=^I, use=tws-generic,
20816 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20817 ht=^I, use=tws2102-sna,
20818 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20819 clear=\E[2J\E[H, cup@, dl@, dl1@,
20820 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20821 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20823 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20824 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20825 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20826 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20827 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20829 #=========================================================#
20830 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20831 #=========================================================#
20833 # Description written by J. Staerck (BULL SA)
20834 # Copyright (c) 1989 BULL SA
20835 #---------------------------------------------------------------------------
20836 # This entry is used for terminals with vt320 emulation mode
20837 # and following set-up :
20838 # 8 bit ISO Latin Character Set (ISO 8859-1),
20839 # 7 bit Control Characters,
20840 # 80 columns screen.
20841 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20842 # They are used in string capabilities with vt220-320 emulation mode.
20843 # In the following DEC definitions, two kinds of terminfo databases are
20845 # 1. the first with Command Sequence Introducer starting with escape
20846 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20847 # 2. the second with Command Sequence Introducer starting with escape
20848 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20849 # Soft Terminal Reset esc [ ! p
20850 # RIS (erases screen): esc c
20851 # DECKPNM numeric keypad mode: esc >
20852 # DECKPAM applic. keypad mode: esc =
20853 # DECSTBM Scrolling region: esc [ r
20854 # SCS select G0 = US: esc ( B
20855 # SCS select G1 = line-graphic: esc ) 0
20856 # Select 7-bit C1 controls: esc sp F
20857 # Select 8-bit C1 controls: esc sp G
20858 # Select cursor home: esc [ H
20859 # Select erase screen: esc [ J
20860 # SM KAM lock keyboard: esc [ 2 h
20861 # RM KAM unlock keyboard: esc [ 2 l
20862 # SM SRM local echo off: esc [ 1 2 h
20863 # RM SRM local echo on: esc [ 1 2 l
20864 # SM LNM New line : esc [ 2 0 h
20865 # RM LNM return = CR only: esc [ 2 0 l
20866 # SM DECCKM cursor keys mode: esc [ ? 1 h
20867 # RM DECCKM appli. keys mode: esc [ ? 1 l
20868 # SM DECANM ANSI mode on: esc [ ? 2 h
20869 # RM DECANM ANSI mode off: esc [ ? 2 l
20870 # SM DECCOLM 132-column screen: esc [ ? 3 h
20871 # RM DECCOLM 80-column screen: esc [ ? 3 l
20872 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20873 # RM DECSCLM Jump scroll: esc [ ? 4 l
20874 # SM DECSCNM screen light backgr. esc [ ? 5 h
20875 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20876 # SM DECOM move within margins: esc [ ? 6 h
20877 # RM DECOM move outside margins: esc [ ? 6 l
20878 # SM DECAWM auto right margin: esc [ ? 7 h
20879 # RM DECAWM auto right margin: esc [ ? 7 l
20880 # SM DECARM auto repeat: esc [ ? 8 h
20881 # RM DECARM auto repeat: esc [ ? 8 l
20882 # DECSASD Select active main: esc [ 0 $ }
20883 # DECSASD Select active status: esc [ 1 $ }
20884 # DECSSDT Select status none: esc [ 0 $ ~
20885 # DECSSDT Select status indic.: esc [ 1 $ ~
20886 # DECSSDT Select status host-wr: esc [ 2 $ ~
20887 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20888 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20889 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20890 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20891 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20892 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20893 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20894 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20895 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20896 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20897 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20898 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20899 # Char. and Line attributes: esc [ Ps ... Ps m
20900 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20901 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20904 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20905 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20906 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20907 cols#80, it#8, lines#24, vt#3, wsl#80,
20908 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20909 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20910 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20912 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20914 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20915 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20916 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20917 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20918 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20919 is1=\E[63;1"p\E[2h,
20920 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20922 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20923 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20924 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20925 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20926 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20927 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20928 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20929 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20930 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20931 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20932 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20933 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20935 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20936 %;m%?%p9%t\E(0%e\E(B%;,
20937 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20938 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20939 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20940 bq300-rv|Bull vt320 reverse 80 columns,
20941 flash=\E[?5l$<50>\E[?5h,
20942 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20945 bq300-w|Bull vt320 132 columns,
20947 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20949 rs2=\E[?3h, use=bq300,
20950 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20952 flash=\E[?5l$<50>\E[?5h,
20953 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20955 rs2=\E[?3h, use=bq300,
20957 # This entry is used for terminals with vt320 emulation mode
20958 # and following set-up :
20959 # 8 bit ISO Latin Character Set (ISO 8859-1),
20960 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20961 # 80 columns screen.
20962 # Soft Terminal Reset csi ! p
20963 # RIS (erases screen): esc c
20964 # DECKPNM numeric keypad mode: esc >
20965 # DECKPAM applic. keypad mode: esc =
20966 # DECSTBM Scrolling region: esc [ r
20967 # SCS select G0 = US: esc ( B
20968 # SCS select G1 = line-graphic: esc ) 0
20969 # Select 7-bit C1 controls: esc sp F
20970 # Select 8-bit C1 controls: esc sp G
20971 # Select cursor home: csi H
20972 # Select erase screen: csi J
20973 # SM KAM lock keyboard: csi 2 h
20974 # RM KAM unlock keyboard: csi 2 l
20975 # SM SRM local echo off: csi 1 2 h
20976 # RM SRM local echo on: csi 1 2 l
20977 # SM LNM New line : csi 2 0 h
20978 # RM LNM return = CR only: csi 2 0 l
20979 # SM DECCKM cursor keys mode: csi ? 1 h
20980 # RM DECCKM appli. keys mode: csi ? 1 l
20981 # SM DECANM ANSI mode on: csi ? 2 h
20982 # RM DECANM ANSI mode off: csi ? 2 l
20983 # SM DECCOLM 132-column screen: csi ? 3 h
20984 # RM DECCOLM 80-column screen: csi ? 3 l
20985 # SM DECSCLM Smooth scroll: csi ? 4 h
20986 # RM DECSCLM Jump scroll: csi ? 4 l
20987 # SM DECSCNM screen light backgr. csi ? 5 h
20988 # RM DECSCNM screen dark backgr. csi ? 5 l
20989 # SM DECOM move within margins: csi ? 6 h
20990 # RM DECOM move outside margins: csi ? 6 l
20991 # SM DECAWM auto right margin: csi ? 7 h
20992 # RM DECAWM auto right margin: csi ? 7 l
20993 # SM DECARM auto repeat: csi ? 8 h
20994 # RM DECARM auto repeat: csi ? 8 l
20995 # DECSASD Select active main: csi 0 $ }
20996 # DECSASD Select active status: csi 1 $ }
20997 # DECSSDT Select status none: csi 0 $ ~
20998 # DECSSDT Select status indic.: csi 1 $ ~
20999 # DECSSDT Select status host-wr: csi 2 $ ~
21000 # SM DECTCEM Visible cursor: csi ? 2 5 h
21001 # RM DECTCEM Invisible cursor: csi ? 2 5 l
21002 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
21003 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
21004 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
21005 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
21006 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
21007 # Char. and Line attributes: csi Ps ... Ps m
21008 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
21009 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
21010 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
21011 bq300-8|Bull vt320 full 8 bits 80 columns,
21012 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
21013 cols#80, it#8, lines#24, vt#3, wsl#80,
21014 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21015 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
21016 clear=\233H\233J, cnorm=\233?25h, cr=\r,
21017 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
21018 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
21019 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
21020 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
21021 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
21022 el=\233K, el1=\2331K, enacs=\E(B\E)0,
21023 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
21024 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
21025 ind=\ED, is1=\E[63;2"p\E[2h,
21026 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21028 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
21029 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
21030 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
21031 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
21032 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
21033 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
21034 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
21035 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
21036 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
21037 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
21038 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
21039 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
21040 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
21041 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
21042 s0ds=\E(B, s1ds=\E(0, sc=\E7,
21043 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
21044 1%;m%?%p9%t\E(0%e\E(B%;,
21045 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
21046 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
21047 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
21048 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
21049 flash=\233?5l$<50>\233?5h,
21050 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21053 bq300-8w|Bull vt320 8-bit 132 columns,
21055 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21057 rs2=\233?3h, use=bq300-8,
21058 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
21060 flash=\233?5l$<50>\233?5h,
21061 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21063 rs2=\233?3h, use=bq300-8,
21065 # This entry is used for terminals with vt320 emulation mode
21066 # a 102 keys keyboard (PC scancode !) and following set-up :
21067 # 8 bit ISO Latin Character Set (ISO 8859-1),
21068 # 7 bit Control Characters,
21069 # 80 columns screen.
21070 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
21071 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
21072 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
21073 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
21074 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
21075 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
21076 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
21077 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
21078 flash=\E[?5l$<50>\E[?5h,
21079 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21082 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
21084 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21086 rs2=\E[?3h, use=bq300-pc,
21087 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
21089 flash=\E[?5l$<50>\E[?5h,
21090 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
21092 rs2=\E[?3h, use=bq300-pc,
21093 # 8 bit ISO Latin Character Set (ISO 8859-1),
21094 # 8 bit Control Characters,
21095 # 80 columns screen.
21096 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
21097 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
21098 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
21099 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
21100 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21101 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
21102 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
21103 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
21104 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
21105 flash=\E[?5l$<50>\E[?5h,
21106 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21109 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
21111 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21113 rs2=\E[?3h, use=bq300-8-pc,
21114 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
21116 flash=\E[?5l$<50>\E[?5h,
21117 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
21119 rs2=\E[?3h, use=bq300-8-pc,
21121 #======================================================#
21122 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
21123 #======================================================#
21125 # normal mode, 8 bits, 80 columns terminal.
21127 # RIS reset initial state: ^[c
21128 # BLE bell enable ^[h
21129 # BLD bell disable ^[g
21130 # CAMS char. attr. mode set ^[[D
21131 # CAMR char. attr. mode reset ^[[G
21133 # KBU keyboard unlock (set) ^[[W
21134 # KBL keyboard lock (reset) ^[[X
21135 # CM character mode (async.) ^[k
21136 # NEP non echoplex mode (by host) ^[l
21137 # EP echoplex mode (by host) ^[m
21138 # IM insert mode set ^[[I
21139 # IM insert mode reset ^[[J
21140 # RMS roll mode set ^[r
21141 # RMR roll mode reset ^[q
21142 # SM78 set mode vip7800 ^[[1q
21143 # SD scroll up (72 lines) ^[[0s
21144 # SD scroll down (72 lines) ^[[1s
21145 # RBM block mode reset ^[[E
21146 # SLS status line set ^[w
21147 # SLR status line reset ^[v
21148 # SLL status line lock ^[O
21149 # LGS Line-graphic mode set ^[G
21150 # LGR Line-graphic mode reset ^[F
21151 # TBC tab clear (at cursor pos.) ^[[g
21152 # TBI tab initialize ^[[N
21153 # TBS tab set (at cursor pos.) ^[p
21154 # PDS print data space ^[[0p
21155 # PHD print host data ^[[3p
21156 # PDT print data terminator ^[[<p
21157 # PRES print adapter reset ^[[2p
21158 # SSPR multi-part. reset ^[[<>u
21159 # SSP0 partition 0 set ^[[00u
21160 # SSP1 partition n format 1 ^[[PnPnSTRINGu
21161 # SSP2 partition n format 2 ^[[PnPnSTRINGu
21162 # SSP3 partition n format 3 ^[[PnPnu
21163 # ATR attribute (visual)
21166 # hide (blank) : ^[sH
21168 # inverse video : ^[sI
21173 # This covers the vip7800 and BQ3155-vip7800
21174 vip|Bull Questar 3155-7800,
21175 am, eslok, hs, km, mc5i, msgr, xenl, xon,
21176 cols#80, it#8, lines#24, vt#3, wsl#80,
21177 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
21178 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21179 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
21180 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
21181 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
21182 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
21183 is2=\E[00u\E[<>001001024080024080u\E[01u,
21184 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
21185 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
21186 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
21187 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
21188 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
21189 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
21190 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
21191 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
21192 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
21193 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
21194 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
21195 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
21196 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
21197 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
21198 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
21199 smul=\Es_, tbc=\E[N, tsl=\Ew,
21200 # normal screen, 8 bits, 132 columns terminal.
21201 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
21203 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
21204 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
21206 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
21207 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
21208 cols#132, lines#72, wsl#132,
21209 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
21214 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
21215 # that is smaller than the screen, and puts up a warning message
21216 # outside the window. Te erases the warning message, puts the
21217 # window back to be the whole screen, and puts the cursor at just
21218 # below the small window. I defined <cnorm> and <civis> to really turn
21219 # the cursor on and off, but I have taken this out since I don't
21220 # like the cursor being turned off when vi exits.
21221 cg7900|chromatics|chromatics 7900,
21224 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
21225 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
21226 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
21227 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
21229 rmso=\001C1\,\001c2\,,
21230 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
21231 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
21232 \001W0\,0\,79\,39\,,
21233 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
21235 #### Computer Automation
21238 ca22851|computer automation 22851,
21241 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
21242 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
21243 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
21248 # This entry has correct padding and the undocumented "ri" capability
21249 cyb83|xl83|cybernex xl-83,
21252 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21253 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
21254 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
21255 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
21256 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
21257 cyb110|mdl110|cybernex mdl-110,
21260 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
21261 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
21262 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
21263 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
21264 ht=\011$<43>, ich1=\016A\035$<3.5>,
21265 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
21269 # Datapoint is gone. They used to be headquartered in Texas.
21270 # They created ARCnet, an Ethernet competitor that flourished for a while
21271 # in the early 1980s before 3COM got wise and cut its prices. The service
21272 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
21275 dp3360|datapoint|datapoint 3360,
21278 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
21279 ed=^_, el=^^, home=^], ind=\n,
21281 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
21282 # The Datapoint 8242 Workstation was sold at least between 1985
21283 # and 1989. To make the terminal work with this entry, press
21284 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
21285 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
21286 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
21287 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
21288 # fact unusable because the strings sent by the terminal conflict
21289 # with other keys).
21290 # The terminal is capable of displaying "box draw" characters.
21291 # For each graphic character you must send 2 ESC's (\E\E) followed
21292 # by a control character as follows:
21293 # character meaning
21294 # ========= =======
21297 # ctrl-G bottom tee
21300 # ctrl-J top left corner
21301 # ctrl-K top right corner
21302 # ctrl-L bottom left corner
21303 # ctrl-M bottom right corner
21304 # ctrl-N horizontal line
21305 # ctrl-O vertical line
21306 # Unfortunately this cannot be fitted into the termcap/terminfo
21307 # description scheme.
21308 dp8242|datapoint 8242,
21311 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
21312 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
21313 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
21314 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21315 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
21316 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
21317 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
21318 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
21319 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21320 smso=\E^E, smul=\E^F,
21321 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
21324 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
21326 # These entries are DEC's official terminfos for its older terminals.
21327 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
21328 # Engineering for more information. Updated terminfos and termcaps
21329 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
21335 bel=^G, cr=\r, cub1=^H, cud1=\n,
21339 bel=^G, cr=\r, cub1=^H, cud1=\n,
21343 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21344 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
21348 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21349 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21350 el=\EK, ht=^I, ind=\n, ri=\EI,
21351 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
21352 vt61|vt-61|vt61.5|dec vt61,
21354 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
21355 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
21356 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
21357 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21360 # The gigi does standout with red!
21361 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
21362 gigi|vk100|dec gigi graphics terminal,
21365 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
21366 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21367 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
21368 el=\E[K, ht=^I, ind=\n,
21369 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
21370 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
21371 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
21372 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21373 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
21376 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
21377 # a PC differentiated from the IBM clones. It was a total, ludicrous,
21378 # grossly-overpriced failure (among other things, DEC's OS didn't include
21379 # a format program, so you had to buy pre-formatted floppies from DEC at
21380 # a hefty premium!).
21381 pro350|decpro|dec pro console,
21383 cols#80, it#8, lines#24,
21384 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21385 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
21386 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21387 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21388 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
21389 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
21390 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
21395 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
21396 dw2|decwriter|dw|decwriter II,
21399 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
21400 # \E(B Use U.S. character set (otherwise # => british pound !)
21401 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
21402 # \E[w 10 char/in pitch
21403 # \E[1;132 full width horizontal margins
21404 # \E[2g clear all tab stops
21406 # \E[66t 66 lines/page (for \f)
21407 # \E[1;66r full vertical page can be printed
21408 # \E[4g clear vertical tab stops
21409 # \E> disable alternate keypad mode (so it transmits numbers!)
21410 # \E[%i%p1%du set tab stop at column %d (origin == 1)
21411 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
21414 # The dw3 does standout with wide characters.
21416 dw3|la120|decwriter III,
21419 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
21420 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
21421 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
21423 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
21427 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
21428 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
21430 # These aren't official
21431 ln03|dec ln03 laser printer,
21434 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
21435 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
21437 ln03-w|dec ln03 laser printer 132 cols,
21439 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
21440 kcud1=\n, nel=\r\n, use=ln03,
21442 #### Delta Data (dd)
21445 # Untested. The cup sequence is hairy enough that it probably needs work.
21446 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
21447 # There are BSD-derived termcap entries floating around for this puppy
21448 # that are *certainly* wrong.
21449 delta|dd5000|delta data 5000,
21452 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
21453 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
21455 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
21457 #### Digital Data Research (ddr)
21460 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
21461 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
21463 cols#80, it#8, lines#24, vt#3,
21464 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
21465 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
21466 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
21467 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
21468 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
21469 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
21470 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
21471 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
21472 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
21473 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
21474 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
21477 #### Evans & Sutherland
21480 # Jon Leech <leech@cs.unc.edu> tells us:
21481 # The ps300 was the Evans & Sutherland Picture System 300, a high
21482 # performance 3D vector graphics system with a bunch of specialized hardware.
21483 # Approximate date of release was 1982 (early 80s, anyway), and it had several
21484 # evolutions including (limited) color versions such as the PS330C. PS300s
21485 # were effectively obsolete by the late 80s, replaced by raster graphics
21486 # systems, although specialized applications like molecular modeling
21487 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
21488 # are out of production, though of course E&S is very much alive (in 1996).
21489 # (ps300: changed ":pt@:" to "it@" -- esr)
21491 ps300|Picture System 300,
21494 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
21496 #### General Electric (ge)
21499 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
21502 bel=^G, cr=\r, cud1=\n, ind=\n,
21504 #### Heathkit/Zenith
21507 # Here is a description of the H19 DIP switches:
21510 # 0-3 = baud rate as follows:
21515 # 0 1 0 1 1200 baud
21516 # 1 0 0 0 2400 baud
21517 # 1 0 1 0 4800 baud
21518 # 1 1 0 0 9600 baud
21519 # 1 1 0 1 19.2K baud
21521 # 4 = parity (0 = no parity)
21522 # 5 = even parity (0 = odd parity)
21523 # 6 = stick parity (0 = normal parity)
21524 # 7 = full duplex (0 = half duplex)
21527 # 0 = block cursor (0 = underscore cursor)
21528 # 1 = no key click (0 = keyclick)
21529 # 2 = wrap at end of line (0 = no wrap)
21530 # 3 = auto LF on CR (0 = no LF on CR)
21531 # 4 = auto CR on LF (0 = no CR on LF)
21532 # 5 = ANSI mode (0 = VT52 mode)
21533 # 6 = keypad shifted (0 = keypad unshifted)
21534 # 7 = 50Hz refresh (1 = 60Hz refresh)
21536 # Factory Default settings are as follows:
21538 # S401 1 0 0 0 1 1 0 0
21539 # S402 0 0 0 0 0 0 0 0
21540 # (h19: I added <rmam>/<smam> based on the init string;
21541 # also added empty <acsc> to suppress a tic warning -- esr)
21542 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
21543 OTbs, am, mir, msgr,
21544 cols#80, it#8, lines#24,
21545 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
21546 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
21547 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
21548 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
21549 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
21550 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
21551 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
21552 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
21553 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
21554 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
21555 h19-bs|heathkit w/keypad shifted,
21556 rmkx=\Eu, smkx=\Et, use=h19-b,
21557 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
21558 rmkx=\Eu, smkx=\Et, use=h19-u,
21559 # (h19: merged in <ip> from BSDI hp19-e entry>;
21560 # also added empty <acsc> to suppress a tic warning --esr)
21561 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
21562 # Tim tells us that:
21563 # I have an old Zenith-19 terminal at home that still gets a lot of use.
21564 # This terminal suffers from the same famous insert-mode padding lossage
21565 # that has been acknowledged for the Z29 terminal. Emacs is nearly
21566 # unusable on this box, since even a half-scroll up or down the window
21567 # causes flaming terminal death.
21569 # On the Z19, the only way I have found around this problem is to remove
21570 # the :al: and :dl: entries entirely. No amount of extra padding will
21571 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
21572 # makes Emacs a little slower, but it remains in the land of the living.
21574 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
21575 OTbs, am, eslok, hs, mir, msgr,
21576 cols#80, it#8, lines#24,
21577 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
21578 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21579 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
21580 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
21581 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21582 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
21583 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
21584 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21585 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
21586 h19-u|heathkit with underscore cursor,
21587 cnorm@, cvvis@, use=h19-b,
21588 h19-g|h19g|heathkit w/block cursor,
21589 cnorm=\Ex4, cvvis@, use=h19-b,
21590 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
21592 dl1=\EM, il1=\EL, use=h19,
21594 # The major problem with the Z29 is that it requires more padding than the Z19.
21596 # The problem with declaring an H19 to be synonymous with a Z29 is that
21597 # it needs more padding. It especially loses if a program attempts
21598 # to put the Z29 into insert mode and insert text at 9600 baud. It
21599 # even loses worse if the program attempts to insert tabs at 9600
21600 # baud. Adding padding to text that is inserted loses because in
21601 # order to make the Z29 not die, one must add so much padding that
21602 # whenever the program tries to use insert mode, the effective
21603 # rate is about 110 baud.
21605 # What program would want to put the terminal into insert mode
21606 # and shove stuff at it at 9600 baud you ask?
21608 # Emacs. Emacs seems to want to do the mathematically optimal
21609 # thing in doing a redisplay rather than the practical thing.
21610 # When it is about to output a line on top of a line that is
21611 # already on the screen, instead of just killing to the end of
21612 # the line and outputting the new line, it compares the old line
21613 # and the new line and if there are any similarities, it
21614 # constructs the new line by deleting the text on the old line
21615 # on the terminal that is already there and then inserting new
21616 # text into the line to transform it into the new line that is
21617 # to be displayed. The Z29 does not react kindly to this.
21619 # But don't cry for too long.... There is a solution. You can make
21620 # a termcap entry for the Z29 that says the Z29 has no insert mode.
21621 # Then Emacs cannot use it. "Oh, no, but now inserting into a
21622 # line will be really slow", you say. Well there is a sort of a
21623 # solution to that too. There is an insert character option on
21624 # the Z29 that will insert one character. Unfortunately, it
21625 # involves putting the terminal into ansi mode, inserting the
21626 # character, and changing it back to H19 mode. All this takes 12
21627 # characters. Pretty expensive to insert one character, but it
21628 # works. Either Emacs doesn't try to use its inserting hack when
21629 # it's only given an insert character ability or the Z29 doesn't
21630 # require padding with this (the former is probably more likely,
21631 # but I haven't checked it out).
21632 # (z29: added empty <acsc> to suppress a tic warning, merged in
21633 # status line capabilities from BRL entry --esr)
21634 z29|zenith29|z29b|zenith z29b,
21635 OTbs, OTpt, am, eslok, hs, mir, msgr,
21636 OTkn#10, cols#80, lines#24,
21637 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
21638 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21639 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
21640 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
21641 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
21642 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
21643 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21644 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
21645 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
21646 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
21647 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
21648 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21649 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
21650 # the world is stable. <rs1> causes the terminal to be reset to the state
21651 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
21652 # cursor, bc -> block cursor.
21653 # From: Mike Meyers
21654 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
21655 # looks vt100-compatible -- esr)
21656 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
21657 OTbs, OTpt, am, eslok, hs, mir, msgr,
21658 OTkn#10, cols#80, it#8, lines#24,
21659 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
21660 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21661 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21662 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21663 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21664 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
21665 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
21666 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
21667 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
21668 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
21669 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
21670 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
21671 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
21672 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
21674 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
21675 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
21676 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
21677 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
21680 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
21681 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
21684 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
21685 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
21688 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
21689 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
21690 am, eslok, hs, mc5i, mir, msgr, xon,
21692 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
21693 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
21694 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
21695 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21696 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21697 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21698 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21699 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
21700 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
21701 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
21702 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
21703 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
21704 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
21705 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
21706 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
21707 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
21708 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
21709 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21710 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
21712 # From: Brad Brahms <Brahms@USC-ECLC>
21713 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
21714 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
21715 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
21716 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
21717 OTbs, OTpt, mir, msgr,
21718 OTkn#10, cols#80, it#8, lines#24,
21719 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
21720 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
21721 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
21722 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
21723 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
21724 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
21725 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
21726 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21727 smir=\E@, smso=\Ep,
21728 p19|h19-b with il1/dl1,
21729 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
21730 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
21731 # (ztx: removed duplicate :sr: -- esr)
21732 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
21733 OTbs, am, eslok, hs,
21734 cols#80, it#8, lines#24,
21735 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
21736 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21737 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
21738 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
21739 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
21740 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
21741 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
21742 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21744 #### IMS International (ims)
21746 # There was a company called IMS International located in Carson City,
21747 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21748 # bus/Z80 hardware and a line of terminals called Ultimas.
21751 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21752 ims950-b|bare ims950 no init string,
21754 # (ims950: removed obsolete ":ko@:" -- esr)
21755 ims950|ims televideo 950 emulation,
21757 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21758 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21759 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21760 ims950-rv|ims tvi950 rev video,
21762 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21763 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21764 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21766 cols#80, it#8, lines#24,
21767 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21768 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21769 ht=^I, if=/usr/share/tabset/vt100,
21770 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21771 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21772 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21775 #### Intertec Data Systems
21777 # I think this company is long dead as of 1995. They made an early CP/M
21778 # micro called the "Intertec Superbrain" that was moderately popular,
21779 # then sank out of sight.
21782 superbrain|intertec superbrain,
21785 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
21786 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21787 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
21788 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21789 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21790 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21791 # and the reverse is actually true. Try it. -- esr)
21792 intertube|intertec|Intertec InterTube,
21795 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
21796 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21797 ind=\n, rmso=\E0@, smso=\E0P,
21798 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21799 # are typing and a command comes in, the keystrokes you type get interspersed
21800 # with the command and it messes up
21801 intertube2|intertec data systems intertube 2,
21803 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21804 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21805 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21807 #### Ithaca Intersystems
21809 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21810 # past. They used to be reachable at:
21812 # Ithaca Intersystems
21813 # 1650 Hanshaw Road
21814 # Ithaca, New York 14850
21816 # However, the outfit went bankrupt years ago.
21819 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21820 # These entries were written (originally in termcap syntax) by Brian Yandell
21821 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21822 # University of Wisconsin.
21824 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21825 # removed <if=/usr/share/tabset/init.graphos> and
21826 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21827 graphos|graphos III,
21829 cols#80, it#8, lines#24,
21830 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21831 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21832 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21833 cuu=\E[%p1%dA, cuu1=\E[A,
21834 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21835 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21836 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21837 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21838 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21839 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21840 smir=\E[4h, smso=\E[7m,
21841 graphos-30|graphos III with 30 lines,
21843 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21847 # These people used to be reachable at:
21850 # 1393 Main Street,
21851 # Waltham, MA 02154
21852 # Vox: (617)-890-5796.
21854 # However, if you call that number today you'll get an insurance company.
21855 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21856 # 26 Feb 1997 that says:
21858 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21859 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21860 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21861 # panel-mount etc). I can be emailed at sonfour@aol.com
21863 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21864 # dated 1984. According to the manual, it featured Tek 4010/4014
21865 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21868 modgraph|mod24|modgraph terminal emulating vt100,
21871 cvvis=\E\^9;0s\E\^7;1s,
21872 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21873 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21874 \E\^11;81s\E\^11;89s,
21875 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
21876 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21877 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21879 cols#80, it#8, lines#24,
21880 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21881 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21882 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21883 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21884 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21885 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21886 1s\E\^9;1s\E\^27;1,
21889 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21890 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21891 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21892 # mark and using delete-to-killbuffer work correctly. However, we would
21893 # like normal mode of operation to be using a Modgraph with 48 line setting.
21894 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21895 # the setting mark and delete-to-killbuffer results in the deletion of only
21896 # the line the mark is set on.
21897 # We've discovered that the delete-to-killbuffer works correctly
21898 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21899 # the first line disappears but a ctrl-l shows that it did work
21901 modgraph48|mod|Modgraph w/48 lines,
21902 OTbs, OTpt, am, xenl,
21903 cols#80, it#8, lines#48, vt#3,
21904 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21905 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21906 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21907 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21908 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21909 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21910 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21911 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21912 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21913 smso=\E[7m, smul=\E[4m,
21915 #### Morrow Designs
21917 # This was George Morrow's company. They started in the late 1970s making
21918 # S100-bus machines. They used to be reachable at:
21921 # 600 McCormick St.
21922 # San Leandro, CA 94577
21924 # but they're long gone now (1995).
21927 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21928 # Jeff's specimen was dated June 1984.
21929 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21930 mt70|mt-70|Morrow MD-70; native Morrow mode,
21931 am, mir, msgr, xon,
21932 cols#80, it#8, lines#24,
21933 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21934 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
21935 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21936 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21937 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21938 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21939 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21940 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21941 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21942 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21943 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21944 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21945 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21946 smul=\EG1, tbc=\E0, use=adm+sgr,
21951 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21953 ex155|Motorola Exorterm 155,
21955 OTkn#5, OTug#1, cols#80, lines#24,
21956 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21957 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21958 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21959 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21960 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21964 # This company is still around in 1995, manufacturing point-of-sale systems.
21966 omron|Omron 8025AG,
21969 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
21970 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21971 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21975 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21976 # were competition for things like the Tektronix 4025.
21979 # Ramtek 6221 from BRL, probably by Doug Gwyn
21980 # The following SET-UP modes are assumed for normal operation:
21981 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21982 # NEWLINE_OFF 80_COLUMNS
21983 # Other SET-UP modes may be set for operator convenience or communication
21984 # requirements; I recommend
21985 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21986 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21987 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21988 # Note that the Control-E key is useless on this brain-damaged terminal. No
21989 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21990 rt6221|Ramtek 6221 80x24,
21991 OTbs, OTpt, msgr, xon,
21992 OTkn#4, cols#80, it#8, lines#24, vt#3,
21993 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21994 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
21995 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21996 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21997 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21998 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21999 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22000 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
22001 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
22002 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
22003 rmso=\E[m, rmul=\E[m,
22004 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
22005 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
22007 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
22008 smul=\E[4m, tbc=\E[3g,
22009 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
22010 rt6221-w|Ramtek 6221 160x48,
22011 cols#160, lines#48,
22012 ll=\E[48;1H, use=rt6221,
22017 # RCA VP3301 or VP3501
22018 rca|rca vp3301/vp3501,
22021 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22022 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
22028 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
22029 # The following SET-UP modes are assumed for normal operation:
22030 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
22031 # ONLINE ANSI CURSOR_VISIBLE
22032 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
22033 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
22034 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
22035 # For use with graphics software, all graphics modes should be set to factory
22036 # default. Other SET-UP modes may be set for operator convenience or
22037 # communication requirements. No delays are specified; use "stty ixon -ixany"
22038 # to enable DC3/DC1 flow control!
22039 # I commented out the scrolling capabilities since they are too slow.
22040 hirez100|Selanar HiREZ-100,
22041 OTbs, OTpt, mir, msgr, xon,
22042 OTkn#4, cols#80, it#8, lines#48, vt#3,
22043 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
22044 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22045 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22046 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
22047 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22048 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
22049 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
22050 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
22051 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
22052 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
22053 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
22054 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
22055 9l\E[r\E[m\E(B\017\E)0\E>,
22056 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
22057 smul=\E[4m, tbc=\E[3g,
22058 hirez100-w|Selanar HiREZ-100 in 132-column mode,
22059 cols#132, use=hirez100,
22064 # From University of Wisconsin
22065 vsc|Signetics Vsc Video driver by RMC,
22067 cols#80, it#8, lines#26,
22068 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
22069 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
22070 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
22071 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
22075 # Alan Frisbie <frisbie@flying-disk.com> writes:
22077 # As you may recall, the Soroc logo consisted of their name,
22078 # with the letter "S" superimposed over an odd design. This
22079 # consisted of a circle with a slightly smaller 15 degree (approx.)
22080 # wedge with rounded corners inside it. The color was sort of
22081 # a metallic gold/yellow.
22083 # If I had been more of a beer drinker it might have been obvious
22084 # to me, but it took a clue from their service department to make
22085 # me exclaim, "Of course!" The circular object was the top of
22086 # a beer can (the old removable pop-top style) and "Soroc" was an
22087 # anagram for "Coors".
22089 # I can just imagine the founders of the company sitting around
22090 # one evening, tossing back a few and trying to decide what to
22091 # call their new company and what to use for a logo.
22094 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
22095 soroc120|iq120|soroc|soroc iq120,
22096 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
22097 kcuf1=^L, kcuu1=^K, use=adm3a,
22098 soroc140|iq140|soroc iq140,
22101 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22102 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
22103 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
22104 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
22105 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
22106 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
22107 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
22109 #### Southwest Technical Products
22111 # These guys made an early personal micro called the M6800.
22112 # The ct82 was probably its console terminal.
22115 # (swtp: removed obsolete ":bc=^D:" -- esr)
22116 swtp|ct82|southwest technical products ct82,
22119 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
22120 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
22121 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
22122 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
22123 \017\035\027\022\011,
22124 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
22128 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
22130 # Synertek used to make ICs, various 6502-based single-board process
22131 # control and hobbyist computers, and assorted peripherals including a
22132 # series of small inexpensive terminals (I think they were one of the
22133 # first to have a "terminal-on-a-keyboard", where the terminal itself
22134 # was only slightly larger than the keyboard).
22136 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
22137 # was a 40x24 terminal that could connect to a standard TV through a
22138 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
22139 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
22140 # I have a KTM-2/80 still in working order. The KTM-2s had fully
22141 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
22142 # ROM and 2 ROMs as character generators. They were incredibly simple,
22143 # and I've never had any problems with mine (witness the fact that mine
22144 # was made in 1981 and is still working great... I've blown the video
22145 # output transistor a couple of times, but it's a 2N2222 :-)
22147 # The KTM-3 (which is what is listed in the terminfo file) was their
22148 # attempt at putting a KTM-2 in a box (and some models came with a
22149 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
22150 # control and escape sequences are very different. The KTM-3 was always
22151 # real broken, at least according to the folks I've talked to about it.
22153 # The padding in the entry is probably off--these terminals were very
22154 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
22155 # anyone with any sanity replaced the ROMs with something that provided
22156 # a reasonable subset of VT100 functionality, since the usual ROMs were
22157 # obviously very primitive... oh, you could get an upgraded ROM from
22158 # Synertek for some incredible amount of money, but what hacker with an
22159 # EPROM burner would do that? :)
22161 # Sorry I don't have any contact info; I believe they were located in
22162 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
22163 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
22164 # business these days.
22167 # Tested, seems to work fine with vi.
22168 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
22171 clear=^Z, cub1=^H, cuf1=^L,
22172 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22174 #### Tab Office Products
22176 # TAB Products Co. - Palo Alto, California
22177 # Electronic Office Products,
22178 # 1451 California Avenue 94304
22180 # I think they're out of business.
22183 # The tab 132 uses xon/xoff, so no padding needed.
22184 # <smkx>/<rmkx> have nothing to do with arrow keys.
22185 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
22186 # Seems to be no way to get rid of status line.
22187 # The manual for this puppy was dated June 1981. It claims to be VT52-
22188 # compatible but looks more vt100-like.
22189 tab132|tab|tab132-15|tab 132/15,
22191 OTdN@, cols#80, lines#24, lm#96,
22192 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
22193 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
22194 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
22196 tab132-w|tab132 in wide mode,
22198 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
22199 tab132-rv|tab132 in reverse-video mode,
22200 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
22201 tab132-w-rv|tab132 in reverse-video/wide mode,
22202 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
22207 # Research Incorporated
22208 # 6425 Flying Cloud Drive
22209 # Eden Prairie, MN 55344
22210 # Vox: (612)-941-3300
22212 # The Teleray terminals were all discontinued in 1992-93. RI still services
22213 # and repairs these beasts, but no longer manufactures them. The Teleray
22214 # people believe that all the types listed below are very rare now (1995).
22215 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
22216 # Model 100) that were ANSI-compatible.
22218 # Note two things called "teleray". Reorder should move the common one
22219 # to the front if you have either. A dumb teleray with the cursor stuck
22220 # on the bottom and no obvious model number is probably a 3700.
22223 t3700|dumb teleray 3700,
22226 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
22227 t3800|teleray 3800 series,
22229 cols#80, it#8, lines#24,
22230 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22231 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22232 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
22233 t1061|teleray|teleray 1061,
22234 OTbs, am, km, xhp, xt,
22235 cols#80, it#8, lines#24, xmc#1,
22236 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22237 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22238 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
22239 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
22240 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
22241 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
22242 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
22243 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
22245 t1061f|teleray 1061 with fast PROMs,
22246 dl1=\EM, il1=\EL, ip@, use=t1061,
22247 # "Teleray Arpa Special", officially designated as
22248 # "Teleray Arpa network model 10" with "Special feature 720".
22249 # This is the new (1981) fast microcode updating the older "arpa" proms
22250 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
22251 # converts the keypad to programmable function keys, and has other goodies.
22252 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
22253 # programs handle such lossage properly.
22254 # Note: this is NOT the old termcap's "t1061f with fast proms."
22255 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
22256 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
22257 t10|teleray 10 special,
22259 cols#80, it#8, lines#24, xmc#2,
22260 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
22261 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22262 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
22263 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
22265 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
22266 # back/forth words. Put the function keys (f1-f10) where they can be
22267 # found, and turn off the other magic keys along the top row, except
22268 # for line/local. Do the magic appropriate to make the page shifts work.
22269 # Also toggle ^S/^Q for those of us who use Emacs.
22271 am, da, db, mir, xhp, xt,
22273 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
22274 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
22275 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
22276 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
22277 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
22278 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
22279 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
22280 smso=\E[7m, smul=\E[4m,
22282 #### Texas Instruments (ti)
22285 # The Silent 700 was so called because it was built around a quiet thermal
22286 # printer. It was portable, equipped with an acoustic coupler, and pretty
22287 # neat for its day.
22288 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
22291 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
22294 # Texas Instruments 916 VDT 7 bit control mode
22296 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
22298 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
22299 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
22300 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22301 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
22302 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
22303 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
22304 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
22305 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
22306 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
22307 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
22308 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
22309 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
22310 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
22311 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
22314 # Texas Instruments 916 VDT 8 bit control mode
22316 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
22317 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
22318 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
22319 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
22320 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22321 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
22322 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
22324 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
22326 ti916-132|Texas Instruments 916 VDT vt220 132 column,
22327 cols#132, use=ti916,
22329 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
22331 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
22332 cols#132, use=ti916-8,
22333 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
22335 cols#80, it#8, lines#24,
22336 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22337 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22338 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22339 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22340 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22341 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22342 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
22343 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
22344 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
22345 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
22346 smul=\E[4m, tbc=\E[3g,
22347 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
22349 cols#80, it#8, lines#24,
22350 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22351 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22352 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22353 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22354 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22355 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22356 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
22357 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
22358 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
22359 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
22360 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22361 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
22362 cols#132, use=ti924,
22363 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
22364 cols#132, use=ti924-8,
22365 ti931|Texas Instruments 931 VDT,
22368 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
22369 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22370 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
22371 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
22372 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22373 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
22374 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
22375 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
22376 sgr0=\E4@, smso=\E4A, smul=\E4D,
22377 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
22378 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
22379 # (ti926-8: I corrected this from the broken SCO entry -- esr)
22380 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
22381 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
22382 ti_ansi|basic entry for ti928,
22383 am, bce, eo, xenl, xon,
22384 colors#8, cols#80, it#8, lines#25, pairs#64,
22385 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
22386 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
22387 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
22388 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
22389 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22390 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
22391 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
22392 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
22393 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
22394 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
22395 smso=\E[7m, smul=\E[4m,
22397 # 928 VDT 7 bit control mode
22399 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
22400 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
22401 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
22402 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
22403 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
22404 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
22406 # 928 VDT 8 bit control mode
22408 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
22409 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
22410 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
22411 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
22412 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
22413 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
22414 kpp=\233T, kprt=\23335~, use=ti_ansi,
22419 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
22420 # had just <smso>=\EG6 which I think means standout was supposed to be
22421 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
22422 # <invis> might work-- esr)
22423 zen30|z30|zentec 30,
22426 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22427 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
22428 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
22429 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
22430 smul@, use=adm+sgr,
22431 # (zen50: this had extension capabilities
22432 # :BS=^U:CL=^V:CR=^B:
22433 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
22434 # which were also in the original entry -- esr)
22435 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
22436 zen50|z50|zentec zephyr,
22438 cols#80, lines#24, xmc#1,
22439 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
22440 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
22441 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
22442 rmul@, smul@, use=adm+sgr,
22444 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
22445 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
22448 blink=\EM", clear=\EH\EJ, cnorm=\EP,
22449 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
22450 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
22451 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
22452 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
22453 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
22454 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
22455 smso=\EM$, smul=\EM0,
22457 ######## OBSOLETE UNIX CONSOLES
22460 #### Apollo consoles
22462 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
22463 # labeled HP700s now.
22466 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
22467 apollo|apollo console,
22470 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
22471 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
22472 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
22473 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
22474 smso=\ES, smul=\EU, vpa=\EO+\s,
22476 # We don't know whether or not the apollo guys replicated DEC's firmware bug
22477 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
22478 # both these capabilities.
22479 apollo_15P|apollo 15 inch display,
22480 rmir@, smir@, use=vt132,
22481 apollo_19L|apollo 19 inch display,
22482 rmir@, smir@, use=vt132,
22483 apollo_color|apollo color display,
22484 rmir@, smir@, use=vt132,
22488 # This actually describes the generic SVr4 display driver for Intel boxes.
22489 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
22490 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
22491 att6386|at386|386at|AT&T WGS 6386 console,
22493 cols#80, it#8, lines#25,
22494 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22495 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
22496 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
22497 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22498 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22499 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
22500 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
22501 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
22502 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
22503 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
22504 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22505 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
22506 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
22507 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
22508 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
22509 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
22511 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
22512 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
22513 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
22514 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
22515 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
22516 pc6300plus|AT&T 6300 plus,
22519 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
22520 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
22521 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
22522 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
22523 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
22524 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
22525 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
22526 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
22527 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22528 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22530 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
22532 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
22533 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
22534 # is broken. All the special key sequences are broken, making it unusable
22535 # with Emacs. The problem stems from the following:
22537 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
22538 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
22539 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
22540 # uses resizable terminal windows, but the bundled terminal program always
22541 # uses an 80x24 window (and doesn't support seem to support a 132-column
22544 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
22545 # library which was a superset of SVr3.5 curses (called tam, for "terminal
22546 # access method".) tam includes support for real, overlapping windows,
22547 # onscreen function key labels, and bitmap graphics. But since the primary
22548 # user interface on the UNIX PC was a GUI program (ua, for "user
22549 # assistant",) and remote administration was considered important for the
22550 # machine, tam also supported VT100-compatible terminals attached to the
22551 # serial port or used across the StarLan network. To simulate the extra keys
22552 # not present on a VT100, users could press ESC and a two-letter sequence,
22553 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
22554 # however, were not the same as those sent by the actual Undo key. The
22555 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
22556 # (If you're interested in adding some of the tam calls to ncurses, btw, I
22557 # have the full documentation and several programs which use tam. It also
22558 # used an extended terminfo format to describe key sequences, special
22559 # highlighting modes, etc.)
22561 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
22562 # there are two sequences for every key-modifier combination (local keyboard
22563 # sequence and remote "VT100" sequence.) But I doubt many people are trying
22564 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
22565 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
22566 # seem to have been built from the manual describing the VT100 sequences.
22567 # This means it doesn't work for a real live UNIX PC.
22569 # FONTS: The UNIX PC also has a strange interpretation of "alternate
22570 # character set". Rather than the VT100 graphics you might expect, it allows
22571 # up to 8 custom fonts to be loaded at any given time. This means that
22572 # programs expecting VT100 graphics will usually be disappointed. For this
22573 # reason I have disabled the smacs/rmacs sequences, but they could easily be
22574 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
22575 # manpage), should you wish to do so:
22577 # SGR10 - Select font 0 - ESC [ 10 m or SO
22578 # SGR11 - Select font 1 - ESC [ 11 m or SI
22579 # SGR12 - Select font 2 - ESC [ 12 m
22581 # SGR17 - Select font 7 - ESC [ 17 m
22583 # Graphics for line drawing are not reliably found at *any* character
22584 # location because the UNIX PC has dynamically reloadable fonts. I use font
22585 # 0 for regular text and font 1 for italics, but this is by no means
22586 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
22588 # MISC: The cursor visible/cursor invisible sequences were swapped in the
22589 # distributed terminfo.
22591 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
22592 # the UNIX PC terminfo entry. The modified version works great with Lynx,
22593 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
22594 # attached by serial cable. In Emacs, even the Undo key works, and many
22595 # applications can now use the F1-F8 keys.
22598 # Terminfo entry for the AT&T Unix PC 7300
22599 # from escape(7) in Unix PC 7300 Manual.
22600 # Somewhat similar to a vt100-am (but different enough
22601 # to redo this from scratch.)
22603 # /***************************************************************
22605 # * FONT LOADING PROGRAM FOR THE UNIX PC
22607 # * This routine loads a font defined in the file ALTFONT
22608 # * into font memory slot #1. Once the font has been loaded,
22609 # * it can be used as an alternative character set.
22611 # * The call to ioctl with the argument WIOCLFONT is the key
22612 # * to this routine. For more information, see window(7) in
22613 # * the PC 7300 documentation.
22614 # ***************************************************************/
22615 # #include <string.h> /* needed for strcpy call */
22616 # #include <sys/window.h> /* needed for ioctl call */
22617 # #define FNSIZE 60 /* font name size */
22618 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
22620 # * The file /usr/lib/wfont/special.8.ft comes with the
22621 # * standard PC software. It defines a graphics character set
22622 # * similar to that of the Teletype 5425 terminal. To view
22623 # * this or other fonts in /usr/lib/wfont, use the command
22624 # * cfont <filename>. For further information on fonts see
22625 # * cfont(1) in the PC 7300 documentation.
22628 # struct altfdata /* structure for alt font data */
22630 # short altf_slot; /* memory slot number */
22631 # char altf_name[FNSIZE]; /* font name (file name) */
22635 # int wd; /* window in which altfont will be */
22636 # struct altfdata altf;
22637 # altf.altf_slot=1;
22638 # strcpy(altf.altf_name,ALTFONT);
22639 # for (wd =1; wd < 12; wd++) {
22640 # ioctl(wd, WIOCLFONT,&altf);
22644 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
22645 # they're confirmed by the man page for the System V display---esr)
22647 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
22649 cols#80, it#8, lines#24,
22650 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
22651 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
22652 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22653 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22654 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
22655 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
22656 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
22657 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
22658 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
22659 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
22660 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
22661 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
22662 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
22663 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
22664 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
22665 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
22666 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
22667 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
22668 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
22669 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
22670 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
22671 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
22674 #### Convergent Technology
22676 # Burroughs bought Convergent shortly before it merged with Univac.
22677 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
22678 # from 1991 or earlier).
22681 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
22682 # (aws: removed unknown :dn=^K: -- esr)
22683 aws|Convergent Technologies AWS workstation under UTX and Xenix,
22685 OTug#0, cols#80, lines#28, xmc#0,
22686 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
22687 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
22688 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
22689 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
22690 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
22691 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
22693 awsc|Convergent Technologies AWS workstation under CTOS,
22695 OTug#0, cols#80, lines#24, xmc#0,
22696 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
22697 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
22698 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
22699 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
22705 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
22706 # The digital uVax II's had a graphic display called a qdss. It was
22707 # supposed to be a high performance graphic accelerator, but it was
22708 # late to market and barely appeared before faster dumb frame buffers
22709 # appeared. I have only used this display while running X11. However,
22710 # during bootup, it was in text mode, and probably had a terminal emulator
22711 # within it. And that is what your termcap entry is for. In graphics
22712 # mode the screen size is 1024x864 pixels.
22713 qdss|qdcons|qdss glass tty,
22715 cols#128, lines#57,
22716 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
22717 cup=\E=%p1%c%p2%c, cuu1=^K,
22719 #### Fortune Systems consoles
22721 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
22722 # in their day; I (esr) used one myself for a year or so around 1984.
22723 # They had no graphics, though, and couldn't compete against Suns and
22727 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
22728 # (This had extension capabilities
22729 # :rv=\EH:re=\EI:rg=0:GG=0:\
22730 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
22731 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
22732 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
22733 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
22734 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
22735 # to force both magic cookie glitches off. Once upon a time, I
22736 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
22737 # function keys; thus the "Al" value for HM was certainly an error. I renamed
22738 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
22739 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
22740 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
22741 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
22742 fos|fortune|Fortune system,
22745 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
22746 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
22747 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22748 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22749 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22750 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
22751 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22752 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22753 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22754 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
22755 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22756 smso=^\H`, smul=^\HP,
22758 #### Masscomp consoles
22760 # Masscomp has gone out of business. Their product line was purchased by
22761 # comany in Georgia (US) called "XS International", parts and service may
22762 # still be available through them.
22765 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22766 masscomp|masscomp workstation console,
22768 cols#80, it#8, lines#24,
22769 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22770 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22771 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22772 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22773 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22774 masscomp1|masscomp large screen version 1,
22775 cols#104, lines#36, use=masscomp,
22776 masscomp2|masscomp large screen version 2,
22777 cols#64, lines#21, use=masscomp,
22782 # OSF/1 1.1 Snapshot 2
22783 pmcons|pmconsole|PMAX console,
22785 cols#128, lines#57,
22786 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
22787 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22788 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22790 #### Other consoles
22791 # The following is a version of the ibm-pc entry distributed with PC/IX,
22792 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22793 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22794 # (the former is untrue, and the latter failed under UCB/man); standout and
22795 # underline modes have been added. Note: this entry describes the "native"
22796 # capabilities of the PC monochrome display, without ANY emulation; most
22797 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22798 pcix|PC/IX console,
22801 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22802 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22803 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22806 # (ibmpcx: this entry used to be known as ibmx.
22807 # It formerly included the following extension capabilities:
22808 # :GC=b:GL=v:GR=t:RT=^J:\
22809 # :GH=\E[196g:GV=\E[179g:\
22810 # :GU=\E[193g:GD=\E[194g:\
22811 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22812 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22813 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22814 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22815 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22816 # what was there before. -- esr)
22817 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22820 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22821 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22822 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22823 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22824 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22825 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22827 ######## OTHER OBSOLETE TYPES
22829 # These terminals are *long* dead -- these entries are retained for
22830 # historical interest only.
22833 #### Obsolete non-ANSI software emulations
22836 # CTRM terminal emulator
22837 # 1. underlining is not allowed with colors: first, is is simulated by
22838 # black on white, second, it disables background color manipulations.
22839 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22840 # so we have to save their status in the static registers A, B and H
22841 # respectively, to be able to restore them when color changes
22842 # (because any color change turns off ALL attributes)
22843 # 3. <bold> and <rev> sequences alternate modes,
22844 # rather than simply entering them. Thus we have to check the
22845 # static register B and H to determine the status, before sending the
22847 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22848 # and then reset colors
22849 # 5. implementation of the protect mode would badly penalize the performance.
22850 # we would have to use \E&bn sequence to turn off colors (as well as all
22851 # other attributes), and keep the status of protect mode in yet another
22852 # static variable. If someone really needs this mode, they would have to
22853 # create another terminfo entry.
22854 # 6. original color-pair is white on black.
22855 # store the information about colors into static registers
22856 # 7. set foreground color. it performs the following steps.
22857 # 1) turn off all attributes
22858 # 2) turn on the background and video attributes that have been turned
22859 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22860 # 3) turn on foreground attributes
22861 # 4) store information about foreground into U,V,W static registers
22862 # 8. turn on background: similar to turn on foreground above
22863 ctrm|C terminal emulator,
22865 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22866 pairs#63, pb#19200, vt#6,
22867 bel=^G, blink=\E&dA%{1}%PA,
22868 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22869 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22870 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22871 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22872 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22873 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22874 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22875 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22876 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22878 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22879 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22880 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22881 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22882 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22883 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22884 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22885 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22886 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22887 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22888 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22890 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22891 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22893 # gs6300 - can't use blue foreground, it clashes with underline;
22894 # it's simulated with cyan
22895 # Bug: The <op> capability probably resets attributes.
22896 # (gs6300: commented out <rmln> (no <smln>) --esr)
22897 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22898 am, bce, msgr, xon,
22899 colors#8, cols#80, it#8, lines#24, pairs#63,
22900 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22902 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22903 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22904 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22905 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22906 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22907 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
22908 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22909 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22910 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22911 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22912 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22913 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22914 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22916 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22917 # MS-Kermit with Heath-19 emulation mode enabled
22918 # (h19k: changed ":pt@:" to ":it@"
22919 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22924 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22925 # Software (formerly Peripherals Computers & Supplies, Inc) of
22926 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22927 # also be reached at support@synergy.com.
22928 versaterm|versaterm vt100 emulator for the Macintosh,
22930 cols#80, it#8, lines#24,
22931 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22932 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
22933 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22934 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22935 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22936 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22937 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22938 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22939 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
22940 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22941 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22942 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22945 # From: Rick Thomas <ihnp4!btlunix!rbt>
22946 # (xtalk: I added <rmam>/<smam> based on the init string.
22947 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22948 am, mir, msgr, xon,
22949 cols#80, it#8, lines#24, vt#3, xmc#1,
22950 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22951 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
22952 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22953 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22954 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22955 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22956 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22957 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22958 rmkx=\E[?1l\E>, rmso=\E[m\s,
22959 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22960 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22961 tbc=\E[3g, use=vt100+fnkeys,
22963 # The official PC terminal emulator program of the AT&T Product Centers.
22964 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22965 simterm|attpc running simterm,
22968 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22969 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22970 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
22971 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22973 #### Daisy wheel printers
22975 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22976 # wheel terminals. These are now largely obsolete.
22979 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22980 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22983 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
22984 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22985 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22987 is2=\r \E9, use=diablo1620,
22988 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22989 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22990 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22992 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22994 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22996 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22997 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22999 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
23000 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
23001 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
23002 # If no tab is set or the terminal's in a bad mood, it glitches the screen
23003 # around all of memory. Note that return puts a blank ("a return character")
23004 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
23005 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
23006 # curses won't work (some old BSD versions) because it doesn't clear this bit,
23007 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
23008 # I have been unable to get tabs set in all 96 lines - it always leaves at
23009 # least one line with no tabs in it, and once you tab through that line,
23010 # it completely weirds out.
23011 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
23014 cols#80, lines#24, lm#96,
23015 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
23016 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
23017 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
23018 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
23019 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
23023 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23024 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23025 gsi|mystery gsi terminal,
23028 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
23030 aj830|aj832|aj|anderson jacobson,
23032 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
23034 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
23035 aj510|Anderson-Jacobson model 510,
23038 clear=^L, cub1=^H, cuf1=\EX,
23039 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
23040 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
23041 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
23042 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
23043 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
23045 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
23046 # This is incomplete, but it's a start.
23047 nec5520|nec|spinwriter|nec 5520,
23050 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
23051 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
23053 qume5|qume|Qume Sprint 5,
23056 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
23057 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
23058 # I suspect the xerox 1720 is the same as the diablo 1620.
23059 xerox1720|x1720|x1750|xerox 1720,
23062 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
23065 #### Miscellaneous obsolete terminals, manufacturers unknown
23067 # If you have any information about these (like, a manufacturer's name,
23068 # and a date on the serial-number plate) please send it!
23070 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
23073 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
23074 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
23077 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
23078 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
23079 kf4=\E8, rmso=\Em^C, smso=\Em^L,
23080 cops10|cops|cops-10|cops 10,
23083 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
23084 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
23085 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
23087 # (d132: removed duplicate :ic=\E5:,
23088 # merged in capabilities from a BRL entry -- esr)
23089 d132|datagraphix|datagraphix 132a,
23092 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
23093 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
23094 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
23095 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
23096 # The d800 was an early portable terminal from c.1984-85 that looked a lot
23097 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
23098 # mode (which is what this entry looks like) and several other lesser-known
23101 OTbs, am, da, db, msgr, xhp,
23102 cols#80, it#8, lines#24,
23103 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
23104 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
23105 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
23106 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
23107 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
23108 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
23109 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23110 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
23111 digilog|digilog 333,
23114 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
23116 # The DWK was a terminal manufactured in the Soviet Union c.1986
23117 dwk|dwk-vt|dwk terminal,
23119 cols#80, it#8, lines#24,
23120 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
23122 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
23123 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
23124 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
23125 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
23126 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
23127 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
23128 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
23129 sgr0=\EX, smacs=\EF, smso=\ET,
23130 env230|envision230|envision 230 graphics terminal,
23132 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
23133 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
23135 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
23136 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
23137 # coupler attached, the whole rig fitting in a suitcase and more or less
23138 # portable. Hot stuff for c.1977 :-) -- esr
23139 ep48|ep4080|execuport 4080,
23142 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
23143 ep40|ep4000|execuport 4000,
23144 cols#136, use=ep4080,
23145 # Adam Thompson <athompso@pangea.ca> tells us:
23146 # Informer series - these are all portable units, resembling older
23147 # automatic bread-baking machines. The terminal looks like a `clamshell'
23148 # design, but isn't. The structure is similar to the Direct terminals,
23149 # but only half the width. The entire unit is only about 10" wide.
23150 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
23151 # keyboard. All the keys are crammed together, much like some laptop
23152 # PCs today, but perhaps less well organized...all these units have a
23153 # bewildering array of plugs on the back, including a built-in modem.
23154 # The 305 was a color version of the 304; the 306 and 307 were mono and
23155 # color terminals built for IBM bisync protocols.
23156 # From: Paul Leondis <unllab@amber.berkeley.edu>
23157 ifmr|Informer D304,
23160 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
23161 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
23162 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
23164 # Entry largely based on wy60 and has the features of wy60ak.
23165 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
23166 am, bw, hs, km, mir, msgr, ul, xon,
23167 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
23168 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
23169 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
23170 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
23171 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
23172 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
23173 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
23175 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
23176 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
23178 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
23179 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
23180 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
23181 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
23182 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
23183 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
23184 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
23185 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
23186 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
23187 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
23188 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
23189 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
23190 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
23191 rs3=\EwG\Ee($<150>,
23192 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
23193 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
23194 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
23195 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
23196 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
23198 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
23199 uc=\EG8\EG0, use=adm+sgr,
23200 teletec|Teletec Datascreen,
23203 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
23205 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
23206 # This description is for the LANPAR Technologies VISION 3220
23207 # terminal from 1984/85. The function key definitions k0-k5 represent the
23208 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
23209 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
23211 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
23212 # I had a couple of scopes (3221) like this once where I used to work, around
23213 # the 1987 time frame if memory serves me correctly. These scopes were made
23214 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
23215 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
23216 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
23217 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
23218 # (3221) cost about $1500 each, and one was always broken -- had to be sent
23219 # back to the shop for repairs.
23220 # The only real advantage these scopes had over the VT-240's were:
23221 # 1) They were faster in the Regis display, or at least the ones I did
23222 # 2) They had a handy debugging feature where you could split-screen the
23223 # scope, the graphics would appear on the top, and the REGIS commands would
23224 # appear on the bottom. I don't remember the VT-240s being able to do that.
23225 # I would swear that LANPAR Technologies was in MA someplace, but since I
23226 # don't work at the same place anymore, and those terminals and manuals were
23227 # long since junked, I cannot be any more sure than that.
23229 # (v3220: removed obsolete ":kn#10:",
23230 # I added <rmam>/<smam> based on the init string -- esr)
23231 v3220|LANPAR Vision II model 3220/3221/3222,
23232 OTbs, am, mir, xenl,
23233 cols#80, it#8, lines#24,
23234 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23235 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23236 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
23237 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
23238 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
23239 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
23240 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
23241 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23242 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
23243 ######## ICH/ICH1 VERSUS RMIR/SMIR
23245 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
23246 # are present; the symptom is doubled characters in an update using insert.
23247 # These applications are technically correct; in both 4.3BSD termcap and
23248 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
23249 # unless the terminal needs both. To my knowledge, no terminal still in this
23250 # file requires both other than the very obsolete dm2500.
23252 # For ncurses-based applications this is not a problem, as ncurses uses
23253 # one or the other as appropriate but never mixes the two. Therefore we
23254 # have not corrected entries like `linux' and `xterm' that specify both.
23255 # If you see doubled characters from these, use the linux-nic and xterm-nic
23256 # entries that suppress ich/ich1. And upgrade to ncurses!
23259 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
23261 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
23262 # ECMA-48 standards are said to be almost identical, but are not the same
23263 # as X3.64 (though for practical purposes they are close supersets of it).
23265 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
23266 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
23267 # Coded Character Sets"), include your snail-mail address, and you should
23268 # receive the document in due course. Don't expect an email acknowledgment.
23270 # Related standards include "X3.4-1977: American National Standard Code for
23271 # Information Interchange" (the ASCII standard) and "X3.41.1974:
23272 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
23273 # American National Standard for Information Interchange." I believe (but
23274 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
23278 #### VT100/ANSI/ECMA-48
23280 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
23281 # and ECMA-48 Control Functions for Coded Character Sets.
23283 # Much of the content of this comment is adapted from a table prepared by
23284 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
23285 # discussion of some terminfo-related issues, and updates to capture ECMA-48
23286 # have been added. Control functions described in ECMA-48 only are tagged
23287 # with * after their names.
23289 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
23290 # sequences. In the main table, \E stands for an escape (\033) character,
23291 # SPC for space. Pn stands for a single numeric parameter to be inserted
23292 # in decimal ASCII. Ps stands for a list of such parameters separated by
23293 # semicolons. Parameter meanings for most parameterized sequences are
23294 # described in the notes.
23296 # Sequence Sequence Parameter or
23297 # Mnemonic Name Sequence Value Mode terminfo
23298 # -----------------------------------------------------------------------------
23299 # APC Applicatn Program Command \E _ - Delim -
23300 # BEL Bell * ^G - - bel
23301 # BPH Break Permitted Here * \E B - * -
23302 # BS BackSpace * ^H - EF -
23303 # CAN Cancel * ^X - - - (A)
23304 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
23305 # CCH Cancel Previous Character \E T - - -
23306 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
23307 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
23308 # CMD Coding Method Delimiter * \E
23309 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
23310 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
23311 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
23312 # CSI Control Sequence Intro \E [ - Intro -
23313 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
23314 # CUB Cursor Backward \E [ Pn D 1 eF cub
23315 # CUD Cursor Down \E [ Pn B 1 eF cud
23316 # CUF Cursor Forward \E [ Pn C 1 eF cuf
23317 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
23318 # CUU Cursor Up \E [ Pn A 1 eF cuu
23319 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
23320 # DA Device Attributes \E [ Pn c 0 - -
23321 # DAQ Define Area Qualification \E [ Ps o 0 - -
23322 # DCH Delete Character \E [ Pn P 1 eF dch
23323 # DCS Device Control String \E P - Delim -
23324 # DL Delete Line \E [ Pn M 1 eF dl
23325 # DLE Data Link Escape * ^P - - -
23326 # DMI Disable Manual Input \E \ - Fs -
23327 # DSR Device Status Report \E [ Ps n 0 - - (I)
23328 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
23329 # EA Erase in Area \E [ Ps O 0 eF - (J)
23330 # ECH Erase Character \E [ Pn X 1 eF ech
23331 # ED Erase in Display \E [ Ps J 0 eF ed (J)
23332 # EF Erase in Field \E [ Ps N 0 eF -
23333 # EL Erase in Line \E [ Ps K 0 eF el (J)
23334 # EM End of Medium * ^Y - - -
23335 # EMI Enable Manual Input \E b Fs -
23336 # ENQ Enquire ^E - - -
23337 # EOT End Of Transmission ^D - * -
23338 # EPA End of Protected Area \E W - - - (K)
23339 # ESA End of Selected Area \E G - - -
23340 # ESC Escape ^[ - - -
23341 # ETB End Transmission Block ^W - - -
23342 # ETX End of Text ^C - - -
23343 # FF Form Feed ^L - - -
23344 # FNK Function Key * \E [ Pn SPC W - - -
23345 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
23346 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
23347 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
23348 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
23349 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
23350 # HPB Char Position Backward \E [ j 1 FE -
23351 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
23352 # HT Horizontal Tab * ^I - FE - (N)
23353 # HTJ Horz Tab w/Justification \E I - FE -
23354 # HTS Horizontal Tab Set \E H - FE hts
23355 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
23356 # ICH Insert Character \E [ Pn @ 1 eF ich
23357 # IDCS ID Device Control String \E [ SPC O - * -
23358 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
23359 # IL Insert Line \E [ Pn L 1 eF il
23360 # IND Index \E D - FE -
23361 # INT Interrupt \E a - Fs -
23362 # JFY Justify \E [ Ps SPC F 0 FE -
23363 # IS1 Info Separator #1 * ^_ - * -
23364 # IS2 Info Separator #1 * ^^ - * -
23365 # IS3 Info Separator #1 * ^] - * -
23366 # IS4 Info Separator #1 * ^\ - * -
23367 # LF Line Feed ^J - - -
23368 # LS1R Locking Shift Right 1 * \E ~ - - -
23369 # LS2 Locking Shift 2 * \E n - - -
23370 # LS2R Locking Shift Right 2 * \E } - - -
23371 # LS3 Locking Shift 3 * \E o - - -
23372 # LS3R Locking Shift Right 3 * \E | - - -
23373 # MC Media Copy \E [ Ps i 0 - - (S)
23374 # MW Message Waiting \E U - - -
23375 # NAK Negative Acknowledge * ^U - * -
23376 # NBH No Break Here * \E C - - -
23377 # NEL Next Line \E E - FE nel (D)
23378 # NP Next Page \E [ Pn U 1 eF -
23379 # NUL Null * ^@ - - -
23380 # OSC Operating System Command \E ] - Delim -
23381 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
23382 # PFS Page Format Selection * \E Pn SPC J 0 - -
23383 # PLD Partial Line Down \E K - FE - (T)
23384 # PLU Partial Line Up \E L - FE - (U)
23385 # PM Privacy Message \E ^ - Delim -
23386 # PP Preceding Page \E [ Pn V 1 eF -
23387 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
23388 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
23389 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
23390 # PTX Parallel Texts * \E [ \ - - -
23391 # PU1 Private Use 1 \E Q - - -
23392 # PU2 Private Use 2 \E R - - -
23393 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
23394 # REP Repeat Char or Control \E [ Pn b 1 - rep
23395 # RI Reverse Index \E M - FE - (V)
23396 # RIS Reset to Initial State \E c - Fs -
23397 # RM Reset Mode * \E [ Ps l - - - (W)
23398 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
23399 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
23400 # SCI Single-Char Introducer \E Z - - -
23401 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
23402 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
23403 # SD Scroll Down \E [ Pn T 1 eF rin
23404 # SDS Start Directed String * \E [ Pn ] 1 - -
23405 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
23406 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
23407 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
23408 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
23409 # SI Shift In ^O - - - (P)
23410 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
23411 # SL Scroll Left \E [ Pn SPC @ 1 eF -
23412 # SLH Set Line Home * \E [ Pn SPC U - - -
23413 # SLL Set Line Limit * \E [ Pn SPC V - - -
23414 # SLS Set Line Spacing * \E [ Pn SPC h - - -
23415 # SM Select Mode \E [ Ps h none - - (W)
23416 # SO Shift Out ^N - - - (Q)
23417 # SOH Start Of Heading * ^A - - -
23418 # SOS Start of String * \E X - - -
23419 # SPA Start of Protected Area \E V - - - (Z)
23420 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
23421 # SPH Set Page Home * \E [ Ps SPC G - - -
23422 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
23423 # SPL Set Page Limit * \E [ Ps SPC j - - -
23424 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
23425 # SR Scroll Right \E [ Pn SPC A 1 eF -
23426 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
23427 # SRS Start Reversed String * \E [ Ps [ 0 - -
23428 # SSA Start of Selected Area \E F - - -
23429 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
23430 # SSW Set Space Width * \E [ Pn SPC [ none - -
23431 # SS2 Single Shift 2 (G2 set) \E N - Intro -
23432 # SS3 Single Shift 3 (G3 set) \E O - Intro -
23433 # ST String Terminator \E \ - Delim -
23434 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
23435 # STS Set Transmit State \E S - - -
23436 # STX Start pf Text * ^B - - -
23437 # SU Scroll Up \E [ Pn S 1 eF indn
23438 # SUB Substitute * ^Z - - -
23439 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
23440 # SYN Synchronous Idle * ^F - - -
23441 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
23442 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
23443 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
23444 # TBC Tab Clear \E [ Ps g 0 FE tbc
23445 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
23446 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
23447 # TSS Thin Space Specification \E [ Pn SC E none FE -
23448 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
23449 # VPB Line Position Backward * \E [ Pn k 1 FE -
23450 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
23451 # VT Vertical Tabulation * ^K - FE -
23452 # VTS Vertical Tabulation Set \E J - FE -
23454 # ---------------------------------------------------------------------------
23458 # Some control characters are listed in the ECMA-48 standard without
23459 # being assigned functions relevant to terminal control there (they
23460 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
23461 # here anyway for completeness.
23463 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
23465 # (B) There seems to be some confusion abroad between CHA and HPA. Most
23466 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
23467 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
23468 # preserved the CHA abbreviation.
23470 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
23471 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
23472 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
23473 # CHT abbreviation.
23475 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
23477 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
23480 # (F) CTC parameter values:
23481 # 0 = set char tab,
23482 # 1 = set line tab,
23483 # 2 = clear char tab,
23484 # 3 = clear line tab,
23485 # 4 = clear all char tabs on current line,
23486 # 5 = clear all char tabs,
23487 # 6 = clear all line tabs.
23489 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
23490 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
23491 # Position Absolute" but retains the HVP abbreviation.
23493 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
23496 # (I) DSR parameter values:
23499 # 2 = busy, will send DSR later,
23501 # 4 = malfunction, will send DSR later,
23503 # 6 = request CPR response.
23505 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
23506 # 0 = clear to end,
23507 # 1 = clear from beginning,
23510 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
23512 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
23514 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
23515 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
23516 # Position Relative" but retains the HPR abbreviation.
23518 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
23521 # (O) SGR parameter values:
23522 # 0 = default mode (attributes off),
23529 # 7 = reverse video,
23531 # 9 = crossed-out (marked for deletion),
23532 # 10 = primary font,
23533 # 10 + n (n in 1..9) = nth alternative font,
23535 # 21 = double underline,
23540 # 26 = proportional spacing,
23552 # 38 = set fg color as in CCITT T.416,
23553 # 39 = set default fg color,
23562 # 48 = set bg color as in CCITT T.416,
23563 # 49 = set default bg color,
23564 # 50 = turn off 26,
23568 # 54 = turn off 51 & 52,
23569 # 55 = not overlined,
23570 # 56-59 = reserved,
23571 # 61-65 = variable highlights for ideograms.
23573 # (P) SI is also called LSO, Locking Shift Zero.
23575 # (Q) SI is also called LS1, Locking Shift One.
23577 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
23578 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
23579 # Absolute' but retains the VPA abbreviation.
23581 # (S) MC parameters:
23582 # 0 = start xfer to primary aux device,
23583 # 1 = start xfer from primary aux device,
23584 # 2 = start xfer to secondary aux device,
23585 # 3 = start xfer from secondary aux device,
23586 # 4 = stop relay to primary aux device,
23587 # 5 = start relay to primary aux device,
23588 # 6 = stop relay to secondary aux device,
23589 # 7 = start relay to secondary aux device.
23591 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
23594 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
23597 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
23599 # (W) RM/SM modes are as follows:
23600 # 1 = Guarded Area Transfer Mode (GATM),
23601 # 2 = Keyboard Action Mode (KAM),
23602 # 3 = Control Representation Mode (CRM),
23603 # 4 = Insertion Replacement Mode (IRM),
23604 # 5 = Status Report Transfer Mode (SRTM),
23605 # 6 = Erasure Mode (ERM),
23606 # 7 = Line Editing Mode (LEM),
23607 # 8 = Bi-Directional Support Mode (BDSM),
23608 # 9 = Device Component Select Mode (DCSM),
23609 # 10 = Character Editing Mode (HEM),
23610 # 11 = Positioning Unit Mode (PUM),
23611 # 12 = Send/Receive Mode (SRM),
23612 # 13 = Format Effector Action Mode (FEAM),
23613 # 14 = Format Effector Transfer Mode (FETM),
23614 # 15 = Multiple Area Transfer Mode (MATM),
23615 # 16 = Transfer Termination Mode (TTM),
23616 # 17 = Selected Area Transfer Mode (SATM),
23617 # 18 = Tabulation Stop Mode (TSM),
23618 # 19 = Editing Boundary Mode (EBM),
23619 # 20 = Line Feed New Line Mode (LF/NL),
23620 # 21 = Graphic Rendition Combination Mode (GRCM),
23621 # 22 = Zero Default Mode (ZDM).
23623 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
23624 # but are listed here for reference.
23626 # (X) Select Alternate Presentation Variants is used only for non-Latin
23629 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
23631 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
23634 # ---------------------------------------------------------------------------
23638 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
23639 # X3.64 Control Sequence Introducer is the two characters "Escape ["
23641 # Delim a Delimiter
23643 # x/y identifies a character by position in the ASCII table (column/row)
23645 # eF editor function (see explanation)
23647 # FE format effector (see explanation)
23649 # F is a Final character in
23650 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
23651 # a control sequence (F from 4/0 to 7/14)
23653 # Gs is a graphic character appearing in strings (Gs ranges from
23654 # 2/0 to 7/14) in the ASCII table
23656 # Ce is a control represented as a single bit combination in the C1 set
23657 # of controls in an 8-bit character set
23659 # C0 the familiar set of 7-bit ASCII control characters
23661 # C1 roughly, the set of control chars available only in 8-bit systems.
23662 # This is too complicated to explain fully here, so read Jim Fleming's
23663 # article in the February 1983 BYTE, especially pages 214 through 224.
23665 # Fe is a Final character of a 2-character Escape sequence that has an
23666 # equivalent representation in an 8-bit environment as a Ce-type
23667 # (Fe ranges from 4/0 to 5/15)
23669 # Fs is a Final character of a 2-character Escape sequence that is
23670 # standardized internationally with identical representation in 7-bit
23671 # and 8-bit environments and is independent of the currently
23672 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
23674 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
23677 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
23680 # Pn is a numeric parameter in a control sequence, a string of zero or
23681 # more characters ranging from 3/0 to 3/9 in the ASCII table
23683 # Ps is a variable number of selective parameters in a control sequence
23684 # with each selective parameter separated from the other by the code
23685 # 3/11 (which usually represents a semicolon); Ps ranges from
23686 # 3/0 to 3/9 and includes 3/11
23688 # * Not relevant to terminal control, listed for completeness only.
23690 # Format Effectors versus Editor Functions
23692 # A format effector specifies how following output is to be displayed.
23693 # An editor function allows you to modify the display. Informally
23694 # format effectors may be destructive; format effectors should not be.
23696 # For instance, a format effector that moves the "active position" (the
23697 # cursor or equivalent) one space to the left would be useful when you want to
23698 # create an overstrike, a compound character made of two standard characters
23699 # overlaid. Control-H, the Backspace character, is actually supposed to be a
23700 # format effector, so you can do this. But many systems use it in a
23701 # nonstandard fashion, as an editor function, deleting the character to the
23702 # left of the cursor and moving the cursor left. When Control-H is assumed to
23703 # be an editor function, you cannot predict whether its use will create an
23704 # overstrike unless you also know whether the output device is in an "insert
23705 # mode" or an "overwrite mode". When Control-H is used as a format effector,
23706 # its effect can always be predicted. The familiar characters carriage
23707 # return, linefeed, formfeed, etc., are defined as format effectors.
23709 # NOTES ON THE DEC VT100 IMPLEMENTATION
23711 # Control sequences implemented in the VT100 are as follows:
23713 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
23714 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
23716 # plus several private DEC commands.
23718 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
23720 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
23721 # Erase from beginning of line to cursor Esc [ 1 K
23722 # Erase line containing cursor Esc [ 2 K
23723 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
23724 # Erase from beginning of screen to cursor Esc [ 1 J
23725 # Erase entire screen Esc [ 2 J
23727 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
23728 # Esc [ 2 J, but this is wrong; the default is 0.
23730 # The VT100 responds to receiving the DA (Device Attributes) control
23732 # Esc [ c (or Esc [ 0 c)
23734 # by transmitting the sequence
23738 # where Ps is a character that describes installed options.
23740 # The VT100's cursor location can be read with the DSR (Device Status
23745 # The VT100 reports by transmitting the CPR sequence
23749 # where Pl is the line number and Pc is the column number (in decimal).
23751 # The specification for the DEC VT100 is document EK-VT100-UG-003.
23755 # Here is a description of the color and attribute controls supported in the
23756 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
23757 # terminal emulators for Intel boxes obey these. They are a proper subset
23758 # of the ECMA-48 escapes.
23760 # 0 all attributes off
23761 # 1 foreground bright
23763 # 5 blink on/background bright (not reliable with brown)
23765 # 8 set blank (non-display)
23766 # 10 set primary font
23767 # 11 set first alternate font (on PCs, display ROM characters 1-31)
23768 # 12 set second alternate font (on PCs, display IBM high-half chars)
23770 # Color attribute sets
23771 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
23772 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
23773 # Bright black becomes gray. Bright brown becomes yellow,
23774 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
23776 # * If the 5 attribute is on and you set a background color (40-47) it is
23777 # supposed to enable bright background.
23779 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
23780 # when you try to set a "bright brown" (yellow) background with attribute
23781 # 5 (you get a blinking yellow foreground instead). A few displays
23782 # (including the System V console) support an attribute 6 that undoes this
23783 # braindamage (this is required by iBCS2).
23785 # * Some older versions of ANSI.SYS have a bug that causes thems to require
23786 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
23789 #### Intel Binary Compatibility Standard
23791 # For comparison, here are the capabilities implied by the Intel Binary
23792 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
23793 # These recommendations are optional. IBCS2 allows the leading escape to
23794 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
23795 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
23796 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
23797 # terminfo entry are followed with the corresponding capability in parens:
23799 # CSI <n>k disable (n=0) or enable (n=1) keyclick
23800 # CSI 2h lock keyboard
23801 # CSI 2i send screen as input
23802 # CSI 2l unlock keyboard
23803 # CSI 6m enable background color intensity
23804 # CSI <0-2>c reserved
23805 # CSI <0-59>m select graphic rendition
23806 # CSI <n>;<m>H (cup) cursor to line n and column m
23807 # CSI <n>;<m>f cursor to line n and column m
23808 # CSI <n>@ (ich) insert characters
23809 # CSI <n>A (cuu) cursor up n lines
23810 # CSI <n>B (cud) cursor down n lines
23811 # CSI <n>C (cuu) cursor right n characters
23812 # CSI <n>D (cud) cursor left n characters
23813 # CSI <n>E cursor down n lines and in first column
23814 # CSI <n>F cursor up n lines and in first column
23815 # CSI <n>G (hpa) position cursor at column n-1
23816 # CSI <n>J (ed) erase in display
23817 # CSI <n>K (el) erase in line
23818 # CSI <n>L (il) insert line(s)
23819 # CSI <n>P (dch) delete characters
23820 # CSI <n>S (indn) scroll up n lines
23821 # CSI <n>T (rin) scroll down n lines
23822 # CSI <n>X (ech) erase characters
23823 # CSI <n>Z (cbt) back up n tab stops
23824 # CSI <n>` cursor to column n on line
23825 # CSI <n>a (cuu) cursor right n characters
23826 # CSI <n>d (vpa) cursor to line n
23827 # CSI <n>e cursor down n lines and in first column
23828 # CSI <n>g (cbt) clear all tabs
23829 # CSI <n>z make virtual terminal n active
23830 # CSI ?7h (smam) turn automargin on
23831 # CSI ?7l (rmam) turn automargin off
23832 # CSI s save cursor position
23833 # CSI u restore cursor position to saved value
23834 # CSI =<c>A set overscan color
23835 # CSI =<c>F set normal foreground color
23836 # CSI =<c>G set normal background color
23837 # CSI =<c>H set reverse foreground color
23838 # CSI =<c>I set reverse foreground color
23839 # CSI =<c>J set graphic foreground color
23840 # CSI =<c>K set graphic foreground color
23841 # CSI =<n>g (dispc) display n from alternate graphics character set
23842 # CSI =<p>;<d>B set bell parameters
23843 # CSI =<s>;<e>C set cursor parameters
23844 # CSI =<x>D enable/disable intensity of background color
23845 # CSI =<x>E set/clear blink vs. bold background
23846 # CSI 7 (sc) (sc) save cursor position
23847 # CSI 8 (rc) (rc) restore cursor position to saved value
23848 # CSI H (hts) (hts) set tab stop
23849 # CSI Q<n><string> define function key string
23850 # (string must begin and end with delimiter char)
23851 # CSI c (clear) clear screen
23853 # The lack of any specification for attributes in SGR (among other things)
23854 # makes this a wretchedly weak standard. The table above is literally
23855 # everything iBSC2 has to say about terminal escape sequences; there is
23856 # no further discussion of their meaning or how to set the parameters
23857 # in these sequences at all.
23860 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23862 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23863 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23864 # with the extension names chosen for compatibility with the termcap names
23865 # assigned in System V terminfo. There are some variant extension sets out
23866 # there. We try to describe them here.
23868 #### XENIX extensions:
23870 # The XENIX extensions include a set of function-key capabilities as follows:
23872 # code XENIX variable name terminfo name name clashes?
23873 # ---- ------------------- ------------- -----------------------
23875 # CR key_char_right
23876 # CW key_change_window create_window
23878 # HM key_home khome
23880 # LD key_delete_line kdl1
23881 # LF key_linefeed label_off
23882 # NU key_next_unlocked_cell
23883 # PD key_page_down knp
23885 # PN start_print mc5
23887 # PS stop_print mc4
23888 # PU key_page_up kpp pulse
23889 # RC key_recalc remove_clock
23890 # RF key_toggle_ref req_for_input
23891 # RT key_return kent
23892 # UP key_up_arrow kcuu1 parm_up_cursor
23894 # WR key_word_right
23896 # The XENIX extensions also include the following character-set and highlight
23899 # XENIX terminfo function
23900 # ----- -------- ------------------------------
23901 # GS smacs start alternate character set
23902 # GE rmacs end alternate character set
23903 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23904 # bo blink begin blink (not used in /etc/termcap)
23905 # be end blink (not used in /etc/termcap)
23906 # bb blink glitch (not used in /etc/termcap)
23907 # it dim begin dim (not used in /etc/termcap)
23908 # ie end dim (not used in /etc/termcap)
23909 # ig dim glitch (not used in /etc/termcap)
23911 # Finally, XENIX also used the following forms-drawing capabilities:
23913 # single double type ASCII approximation
23914 # ------ ------ ------------- -------------------
23915 # GV Gv vertical line |
23916 # GH Gv horizontal line - _
23917 # G1 G5 top right corner _ |
23918 # G2 G6 top left corner |
23919 # G3 G7 bottom left corner |_
23920 # G4 G8 bottom right corner _|
23921 # GD Gd down-tick character T
23922 # GL Gl left-tick character -|
23923 # GR Gr right-tick character |-
23924 # GC Gc middle intersection -|-
23925 # GU Gu up-tick character _|_
23927 # These were invented to take advantage of the IBM PC ROM character set. One
23928 # can compose an acsc string from the single-width characters as follows
23929 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23930 # When translating a termcap file, ncurses tic will do this automatically.
23931 # The double forms characters don't fit the SVr4 terminfo model.
23933 #### AT&T Extensions:
23935 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23936 # nonstandard capabilities. Its signature is the KM capability, used to name
23937 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23938 # set. Comments in the original, and a little cross-checking with other AT&T
23939 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23940 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23941 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23942 # cursor invisible), and CV=:ve: (make cursor normal).
23946 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23947 # have the System V capabilities up to SVr1 level. After that, it supports
23948 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23949 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23950 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23951 # HP binary format incompatible with SVr4's.
23953 #### IBM Extensions
23955 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23956 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23957 # capabilities following prtr_non with the following special capabilities:
23958 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23959 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23960 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23961 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23962 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23963 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23964 # correspond to acsc chars, here is the mapping:
23966 # box1[0] = ACS_ULCORNER
23967 # box1[1] = ACS_HLINE
23968 # box1[2] = ACS_URCORNER
23969 # box1[3] = ACS_VLINE
23970 # box1[4] = ACS_LRCORNER
23971 # box1[5] = ACS_LLCORNER
23972 # box1[6] = ACS_TTEE
23973 # box1[7] = ACS_RTEE
23974 # box1[8] = ACS_BTEE
23975 # box1[9] = ACS_LTEE
23976 # box1[10] = ACS_PLUS
23978 # The box2 characters are the double-line versions of these forms graphics.
23979 # The AIX binary terminfo format is incompatible with SVr4's.
23981 #### Iris console extensions:
23983 # HS is half-intensity start; HE is half-intensity end
23984 # CT is color terminal type (for Curses & rogue)
23985 # CP is color change escape sequence
23986 # CZ are color names (for Curses & rogue)
23988 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23990 #### TC Extensions:
23992 # There is a set of extended termcaps associated with something
23993 # called the "Terminal Control" or TC package created by MainStream Systems,
23994 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23995 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23996 # that flags color terminals.
23998 ######## NCURSES USER-DEFINABLE CAPABILITIES
24000 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
24001 # infocmp to manipulate user-definable capabilities. Those that are intended
24002 # for use in either terminfo or termcap use 2-character names. Extended
24003 # function keys do not use 2-character names, and are available only with
24006 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
24007 # tic/infocmp, and uses this database (with a few changes). There are a few
24008 # differences, noted in
24009 # https://invisible-island.net/ncurses/ncurses-netbsd.html
24011 # ncurses makes explicit checks for a few user-definable capabilities: AX,
24012 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
24014 #### SCREEN Extensions:
24016 # The screen program uses the termcap interface. It recognizes a few useful
24017 # nonstandard capabilities. Those are used in this file.
24019 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
24021 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
24022 # E0 (str) Switch charset 'G0' back to standard charset.
24023 # S0 (str) Switch charset 'G0' to the specified charset.
24024 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
24027 # AX is relatively straightforward; it is interpreted by ncurses to say that
24028 # SGR 39/49 reset the terminal's foreground and background colors to their
24031 # XT is harder, since screen's manpage does not give more details. For that,
24032 # we must read screen's source-code. For example, when XT is set, screen
24035 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
24036 # screen may also set the terminal's name, which is (for xterm) distinct
24037 # from the icon name.
24038 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
24039 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
24040 # this is an rxvt feature.
24041 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
24042 # These are from xterm, although xterm accepts mouse codes that may not be
24043 # recognized by screen, e.g., 1005, 1006.
24044 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
24045 # sequence. However, because screen uses only termcap, the values returned
24046 # by Af/Ab are not usable because they rely on expressions that termcap
24047 # does not support. Therefore, screen uses a hardcoded string to work
24048 # around the limitation. In a few cases, screen also uses tparm, which
24049 # is a terminfo function rather than termcap.
24050 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
24051 # g) screen also uses the feature to decide whether to pay attention to other
24052 # xterm-related features which are unrelated to the description in the
24055 # Since XT is useful only when the outer terminal matches screen's assumptions,
24056 # it is appropriate to use it in the derived terminal descriptions such as
24057 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
24059 # The other ISO-2022 features are rarely used, but provided here to make
24060 # screen's termcap features available.
24062 #### XTERM Extensions:
24064 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
24065 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
24066 # additional function-key strings. Some other developers copied the feature,
24067 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
24068 # these key definitions less ambiguous.
24070 # A few terminals provide similar functionality (sending distinct keys when
24071 # a modifier is used), including rxvt.
24073 # These are the extended keys defined in this file:
24075 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
24076 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
24077 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
24078 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
24080 # Here are the other xterm-related extensions which are used in this file:
24082 # Cr is a string capability which resets the cursor color
24083 # Cs is a string capability which sets the cursor color to a given value.
24084 # The single string parameter is the color name/number, according to the
24086 # Ms modifies the selection/clipboard. Its parameters are
24087 # p1 = the storage unit (clipboard, selection or cut buffer)
24088 # p2 = the base64-encoded clipboard content.
24089 # Se resets the cursor style to the terminal power-on default.
24090 # Ss is a string capability with one numeric parameter. It is used to set the
24091 # cursor style as described by the DECSCUSR function to a block or
24093 # TS is a string capability which acts like "tsl", but uses no parameter and
24094 # goes to the first column of the "status line".
24095 # XM is a string capability which overrides ncurses's built-in string which
24096 # enables/disables xterm mouse mode.
24097 # xm shows the format of the mouse responses. Parameters are (from zero):
24101 # p4 = state, e.g., pressed or released
24102 # p6 = y-ordinate starting region
24103 # p7 = x-ordinate starting region
24104 # p8 = y-ordinate ending region
24105 # p9 = x-ordinate ending region
24106 # Other extensions, used in xm:
24109 #### Miscellaneous extensions:
24111 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
24112 # This was implemented for the Hurd.
24113 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
24114 # experimental feature of tmux.
24115 # E3 clears the terminal's scrollback buffer. This was implemented in the
24116 # Linux 3.0 kernel as a security feature. It matches a feature which was
24117 # added in xterm patch #107.
24118 # U8 is a numeric capability which denotes a terminal emulator which does not
24119 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
24120 # value to enable it.
24121 # Smulx modifies the appearance of underlines in VTE, December 2017.
24123 ######## CHANGE HISTORY
24125 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
24126 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
24127 # maintained by Eric S. Raymond as part of the ncurses project.
24129 # This file contains all the capability information present in John Kunze's
24130 # last version of the termcap master file, except as noted in the change
24131 # comments at end of file. Some information about very ancient obsolete
24132 # capabilities has been moved to comments. Some all-numeric names of older
24133 # terminals have been retired.
24135 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
24136 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
24137 # used by BSD curses.
24139 # The 9.1.0 version of this file was translated from my lightly-edited copy of
24140 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
24141 # the purpose. Unless the ncurses tic implementation and the Lisp code were
24142 # making perfectly synchronized mistakes which I then failed to catch by
24143 # eyeball, the translation was correct and perfectly information-preserving.
24145 # Major version number bumps correspond to major version changes in ncurses.
24147 # Here is a log of the changes since then:
24149 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
24150 # * First terminfo master translated from 8.3.
24151 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
24152 # * Replaced Wyse entries with updated entries supplied by vendor.
24154 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
24155 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
24156 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
24157 # * Better XENIX keycap translation. Describe TC termcaps.
24158 # * Contact and history info supplied by Qume.
24159 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
24160 # * Raided the Shuford FTP site for recent termcaps/terminfos.
24161 # * Added information on X3.64 and VT100 standard escape sequences.
24162 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
24163 # * Added a correct X11R6 xterm entry.
24164 # * Fixed terminfo translations of padding.
24165 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
24166 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
24167 # * Added u6/u7/u8/u9 capabilities.
24168 # * Added PCVT entry.
24169 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
24170 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
24171 # to use reverse-video standout so Emacs will look right.
24172 # * Added el1 capability to ansi.
24173 # * Added smacs/rmacs to ansi.sys.
24175 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
24176 # * New mt70 entry.
24177 # * Added COPYRIGHTS AND OTHER DELUSIONS.
24178 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
24179 # smartvid & smarterm, ampex 175 & 219 & 232,
24180 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
24181 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
24182 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
24183 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
24184 # * Replaced the Perkin-Elmer entries with vendor's official ones.
24185 # * Restored the old minimal-ansi entry, luna needs it.
24186 # * Fixed some incorrect ip and proportional-padding translations.
24187 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
24188 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
24189 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
24190 # to force a particular height.
24191 # * Added beehive4 and reorganized other Harris entries.
24192 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
24193 # * Merged in DEC's official entries for its terminals. The only old
24194 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
24195 # * Replaced the translated BBN BitGraph entries with purpose-built
24196 # ones from AT&T's SVr3.
24197 # * Replaced the AT&T entries with AT&T's official terminfos.
24198 # * Added teleray 16, vc415, cops10.
24199 # * Merged in many individual capabilities from SCO terminfo files.
24200 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
24202 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
24203 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
24204 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
24205 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
24206 # simterm, citoh and variants.
24207 # * Replaced sol entry with sol1 and sol2.
24208 # * Replaced Qume QVT and Freedom-series entries with purpose-built
24209 # terminfo entries.
24210 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
24211 # and dg200 entries using caps from from SCO.
24212 # * Added the usual set of function-key mappings to ANSI entry.
24213 # * Corrected xterm's function-key capabilities.
24214 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
24215 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
24216 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
24217 # * Fix in xterm entry, get the arrow keys right.
24218 # * Change some \0 escapes to \200.
24219 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
24220 # * Added apple (Videx card), adm1a, oadm31.
24221 # * Fixed malformed ampex csr.
24222 # * Fixed act4, cyb110; they had old-style prefix padding left in.
24223 # * Changed mandatory to advisory padding in many entries.
24224 # * Replaced HP entries up to hpsub with purpose-built ones.
24225 # * Blank rmir/smir/rmdc/smdc capabilities removed.
24226 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
24227 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
24228 # * Replaced the Ann Arbor entries with SCO's, the init strings are
24229 # more efficient (but the entries otherwise identical).
24230 # * Added dg211 from Shuford archive.
24231 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
24232 # adm42-nl, pc52, gs6300, xerox820, uts30.
24233 # * Pull SCO's padding into vi200 entry.
24234 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
24235 # entries merged in from SCO's descriptions.
24236 # * Fixed old-style prefix padding on zen50, h1500.
24237 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
24238 # entry from SCO's description.
24239 # * Reorganized the special entries.
24240 # * Added lm#0 to cbunix and virtual entries.
24242 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
24243 # * Restored cdc456tst.
24244 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
24245 # * Added megatek, beacon, microkit.
24246 # * Freeze for ncurses-1.9 release.
24247 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
24248 # * Added historical data for TAB.
24249 # * Comment fixes from David MacKenzie.
24250 # * Added the new BSDI pc3 entry.
24251 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
24252 # * A change in the tic -C logic now ensures that all entries in
24253 # the termcap translation will fit in < 1024 bytes.
24254 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
24255 # from GNU termcap file. This merges in all their local information.
24256 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
24257 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
24258 # * Added warnings about entries with long translations (restoring
24259 # all the GNU termcaps pushes a few over the edge).
24260 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
24261 # * Yet another tic change, and a couple of entry tweaks, to reduce the
24262 # number of long (> 1024) termcap translations back to 0.
24264 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
24265 # * Added kf13-kf20 to Linux entry.
24266 # * Regularize Prime terminal names.
24267 # * Historical data on Synertek.
24268 # * Freeze for ncurses-1.9.1.
24269 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
24270 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
24271 # * Eliminate whitespace in short name fields, this tanks some scripts.
24272 # * Name field changes to shorten some long entries.
24273 # * Termcap translation now automatically generates empty rmir/smir
24274 # when ich1/ich is present (copes with an ancient vi bug).
24275 # * Added `screen' entries from FSF's screen-3.6.2.
24276 # * Added linux-nic and xterm-nic entries.
24277 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
24278 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
24279 # eliminating some special-case code in ncurses.
24281 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
24282 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
24283 # that captures everything unique from it.
24284 # * Added reorder script generator.
24285 # * Freeze for ncurses 1.9.2 release.
24286 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
24287 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
24288 # * Added Olaf Siebert's corrections for adm12.
24289 # * ansi-pc-color now includes the colors and pairs caps, so that
24290 # entries which use it will inherit them automatically.
24291 # * The linux entry can now recognize the center (keypad 5) key.
24292 # * Removed some junk that found its way into Linux acsc.
24294 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
24295 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
24296 # * xterm doesn't try to use application keypad mode any more.
24297 # * Freeze for ncurses-1.9.3 release.
24298 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
24299 # * Added corrected sun entry from vendor.
24300 # * Added csr capability to linux entry.
24301 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
24302 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
24303 # * Some commented-out caps in long entries come back in, my code
24304 # for computing string-table lengths had a bug in it.
24305 # * pcansi series modified to fit comm-program reality better.
24306 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
24307 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
24308 # * Correct some bad aliases in the pcansi series
24309 # * Added entry for QNX console.
24310 # * Clean up duplicate long names for use with 4.4 library.
24311 # * Change vt100 standout to be normal reverse vide, not bright reverse;
24312 # this makes the Emacs status line look better.
24313 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
24314 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
24315 # * Minor surgery, mostly on name strings, to shorten termcap version.
24317 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
24318 # * Added dec-vt100 for use with the EWAN emulator.
24319 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
24320 # * Freeze for 1.9.5 alpha release.
24321 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
24322 # * Changed xterm lines to 24, the X11R6 default.
24323 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
24324 # * Added 7 newly discovered, undocumented acsc characters to linux
24325 # entry (the pryz{|} characters).
24326 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
24327 # * Correct two typos in the xterm entries introduced in 9.9.1.
24328 # * I finally figured out how to translate ko capabilities. Done.
24329 # * Added tvi921 entries from Tim Theisen.
24330 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
24331 # * Removed mystery tec entry, it was neither interesting nor useful.
24332 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
24333 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
24334 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
24335 # by making them relative to use capabilities
24336 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
24337 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
24338 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
24340 # * Translate all home=\E[;H capabilities to home=\E[H, they're
24342 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
24343 # vt100 and ANSI-like terminals.
24344 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
24345 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
24346 # does this now, too.
24347 # * fviewpoint is gone, it duplicated screwpoint.
24348 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
24349 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
24350 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
24351 # The UW vi50 replaces the old one, which becomes vi50adm,
24352 # * No more embedded commas in name fields.
24354 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
24355 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
24356 # * Introduced klone+* entries for describing Intel-console behavior.
24357 # * Linux kbs is default-mapped to delete for some brain-dead reason.
24358 # * -nsl -> -ns. The -pp syntax is obsolete.
24359 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
24360 # * Make xterm entry do application-keypad mode again. I got complaints
24361 # that it was messing up someone's 3270 emulator.
24362 # * Added some longname fields in order to avoid warning messages from
24363 # older tic implementations.
24364 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
24365 # it! (This gives us pi, greater than, less than, and a few more.)
24366 # * Freeze for ncurses-1.9.6 release.
24367 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
24368 # * Add xon to a number of console entries, they're memory-mapped and
24369 # don't need padding.
24370 # * Correct the use dependencies in the ansi series.
24371 # * Hand-translate more XENIX capabilities.
24372 # * Added hpterm entry for HP's X terminal emulator.
24373 # * Added aixterm entries.
24374 # * Shortened four names so everything fits in 14 chars.
24376 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
24377 # * Added ibcs2 entry and info on iBCS2 standard.
24378 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
24379 # * We can handle the HP meml/memu capability now.
24380 # * Added smacs to klone entries, just as documentation.
24381 # * Corrected ansi.sys and cit-500 entries.
24382 # * Added z39, vt320-k311, v220c, and avatar entries.
24383 # * Make pcansi use the ansi.sys invis capability.
24384 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
24385 # tvi925, tvi950, dt80, ncr7900i, h19.
24386 # * X3.64 has been withdrawn, change some references.
24387 # * Removed function keys from ansi-m entry.
24388 # * Corrected ansi.sys entry.
24389 # * Freeze for ncurses-1.9.7 release.
24390 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
24391 # * Added rmam/smam capabilities to many entries based on init strings.
24392 # * Added correct hpa/vpa to linux.
24393 # * Reduced several entries relative to vt52.
24394 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
24395 # * Exiled some utterly unidentifiable custom and homebrew types to the
24396 # UFO file; also, obsolete small-screen hardware; also, entries which
24397 # look flat-out incorrect, garbled, or redundant. These include the
24398 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
24399 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
24400 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
24401 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
24402 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
24403 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
24404 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
24405 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
24406 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
24407 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
24408 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
24409 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
24410 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
24411 # * Corrected pcvt25h as suggested by Brian C. Grayson
24412 # <bgrayson@pine.ece.utexas.edu>.
24413 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
24414 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
24415 # * Added kent=\EOM to xterm entry.
24417 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
24418 # * Corrected gigi entry.
24419 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
24420 # bad hpa/vpa capabilities.
24421 # * Corrected flash strings to have a uniform delay of .2 sec. No
24422 # more speed-dependent NUL-padding!
24423 # * terminfo capabilities in comments bracketed with <>.
24424 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
24425 # * Replaced pcvt with the 3.31 pcvt entries.
24426 # * Freeze for 1.9.7a.
24427 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
24428 # * Added emu entry from the X11R6 contrib tape sources.
24430 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
24431 # * Improved iris-ansi and sun entries.
24432 # * More flash string improvements.
24433 # * Corrected wy160 & wy160 as suggested by Robert Dunn
24434 # * Added dim to at386.
24435 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
24436 # he's ready to start using the termcap generated from this one.
24437 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
24438 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
24439 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
24440 # att610, att620, att630,
24441 # * Changed hazeltine name prefix from h to hz.
24442 # * Sent t500 to the UFI file.
24443 # * I think we've sucked all the juice out of BSDI's termcap file now.
24444 # * Freeze for ncurses 1.9.8 release
24445 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
24446 # * Unfreeze, linux kbs needed to be fixed.
24447 # * Tim Theisen pinned down a bug in the DMD firmware.
24448 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
24449 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
24450 # (The broken ones had been shadowed by sgr.)
24451 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
24452 # * Added documentation on ECMA-48 standard.
24453 # * New Amiga entry.
24454 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
24455 # * More ECMA-48 stuff
24456 # * Corrected typo in minix entry, added pc-minix.
24457 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
24458 # * Added rxvt entry.
24459 # * Added 1.3.x color-change capabilities to linux entry.
24460 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
24461 # * Corrected rxvt entry khome/kend.
24462 # * Corrected linux color change capabilities.
24463 # * NeXT entries from Dave Wetzel.
24464 # * Cleaned up if and rf file names (all in /usr/share now).
24465 # * Changed linux op capability to avoid screwing up a background color
24466 # pair set by setterm.
24467 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
24468 # * Added xterm-sun.
24469 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
24472 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
24473 # * Another sweep through the Shuford archive looking for new info.
24474 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
24475 # * Added st52 from Per Persson.
24476 # * Added eterm from the GNU Emacs 19.30 distribution.
24477 # * Freeze for 1.9.9.
24478 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
24479 # * FreeBSD console entries from Andrew Chernov.
24480 # * Removed duplicate Atari st52 name.
24481 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
24482 # * xterm doesn't actually have ACS_BLOCK.
24483 # * Change klone+color setf/setb to simpler forms that can be
24484 # translated into termcap.
24486 # * Removed mechanically-generated junk capabilities from cons* entries.
24487 # * Added color support to bsdos.
24488 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
24489 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
24490 # * Created ecma+color, linux can use it. Also added ech to linux.
24491 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
24492 # * Add descriptions to FreeBSD console entries. Also shorten
24493 # some aliases to <= 14 chars for portability.
24494 # * Added x68k console
24495 # * Added OTbs to several VT-series entries.
24496 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
24497 # * screen entry update for 3.7.1 from Michael Alan Dorman.
24498 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
24499 # * kterm correction due to Kenji Rikitake.
24500 # * ACS correction in vt320-kll due to Phillippe De Muyter.
24501 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
24502 # * Sun console entry correction from J.T. Conklin.
24503 # * Changed all DEC VT300 and up terminals to use VT300 tab set
24504 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
24505 # * Added smul to linux entry (we never noticed it was missing
24506 # because of sgr!).
24507 # * Added rmln to hp+labels (deduced from other HP entries).
24508 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
24509 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
24510 # * Corrected vt220 acsc.
24511 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
24512 # this corresponds to reality and helps prevent some tic warnings.
24513 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
24514 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
24515 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
24516 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
24517 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
24518 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
24519 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
24520 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
24521 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
24522 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
24523 # ifmr, v3220, wy100q, tandem653, ibmaed.
24524 # * Added DWK terminal description.
24525 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
24526 # * Many entries now have highlights inherited from adm+sgr.
24527 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
24528 # * xtitle and xtitle-twm enable access to the X status line.
24529 # * Added linux-1.3.6 color palette caps in conventional format.
24530 # * Added adm1178 terminal.
24531 # * Move fos and apollo terminals to obsolete category.
24532 # * Aha! The BRL terminals file told us what the Iris extensions mean.
24533 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
24534 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
24536 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
24537 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
24538 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
24539 # * Corrected, from BRL termcap file: vi50.
24540 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
24541 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
24542 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
24543 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
24544 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
24545 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
24546 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
24547 # * Paired-attribute fixes to various terminals.
24548 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
24549 # * xterm entry corrections from Thomas Dickey.
24550 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
24551 # * Added t916 entry, translated from a termcap in SCO's support area.
24552 # * New qnx entry from Michael Hunter.
24553 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
24554 # * Added hpex2 from Ville Sulko.
24555 # * Fixed a bug that ran the qnx and pcvtXX together.
24556 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
24557 # * Added dtterm entry from Solaris CDE.
24558 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
24559 # * corrected pairs#8 typo in dtterm entry.
24561 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
24562 # * updated xterm entry to cover 3.1.2E's new features.
24563 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
24564 # * Added new minix entry
24565 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
24566 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
24567 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
24568 # * Added Prism entries and kt7ix.
24569 # * Caution notes about EWAN and tabset files.
24570 # * Changed /usr/lib/tabset -> /usr/share/tabset.
24571 # * Added acsc/rmacs/smacs to vt52.
24572 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
24573 # * Merged in Thomas Dickey's reorganization of the xterm entries;
24574 # added technical corrections to avoid warning messages.
24575 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
24576 # * Added rmso=\E[27m in Linux entry.
24577 # * Added koi8-r support for Linux console.
24578 # * Replace xterm entries with canonical ones from XFree86 3.2.
24579 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
24580 # * Added color_xterm from Jacob Mandelson
24581 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
24582 # * Back off the xterm entry to use r6 as a base.
24583 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
24584 # * Added dec-vt220 at Adrian Garside's request.
24586 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
24588 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
24589 # * Minor corrections to xterm entries.
24590 # * Replaced EWAN telnet entry.
24591 # * Dropped the reorder script generator. It was a fossil.
24592 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24593 # * Replaced minitel-2 entry.
24594 # * Added MGR, ansi-nt.
24595 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24596 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24597 # the 4.4BSD Lite2 file.
24599 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
24600 # * Use setaf/setab consistently with SVr4.
24601 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
24602 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
24603 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
24604 # * add xterm-16color, for XFree86 3.3
24605 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
24606 # * correct typo in emu
24607 # * correct typo in vt102-w (Robert Wuest)
24608 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
24609 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
24610 # * remove ech capability from rxvt (it does the wrong thing)
24611 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
24612 # * remove spurious newlines from several entries (hp+color, wy50,
24613 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
24615 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
24616 # * correct rmso capability of wy50-mc
24617 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
24618 # * add cbt to xterm-xf86-v32
24619 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
24620 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
24621 # other capabilities not in xterm-r6.
24622 # * remove alternate character set from kterm entry.
24623 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
24624 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
24625 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
24626 # * add xterm-8bit entry.
24627 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
24628 # * repair several places where early version of tic replaced \, with \\\,
24629 # * make acsc entries canonical form (sorted, uniq).
24630 # * modify acsc entries for linux, linux-koi8
24631 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
24632 # * add color, mouse support to kterm.
24633 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
24634 # * correct wy120 smxon/tbc capabilities which were stuck together.
24635 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
24636 # * add entry for xterm-xf86-v39t
24637 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
24638 # * add u8,u9 to sun-il description
24639 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
24640 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
24642 # * add hds200 description (Walter Skorski)
24643 # * add EMX 0.9b descriptions
24644 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
24645 # * rename xhpterm back to hpterm.
24646 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
24647 # * change initc in linux-c-nc to use 0..1000 range.
24648 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
24649 # * remove hpa/vpa from rxvt, which implements them incorrectly.
24650 # * add sgr0 for rxvt.
24651 # * remove bogus smacs/rmacs from EMX descriptions.
24652 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
24653 # * revised entry for att7300
24654 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
24655 # * use \0 rather than \200.
24656 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
24657 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
24658 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
24659 # * rename xterm-xf86-v39t to xterm-xf86-v40
24660 # * remove bold/underline from sun console entries since they're not
24662 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
24663 # * add beterm entry (Fred Fish)
24664 # * add irix-color/xwsh entry.
24665 # * turn ncv off for linux.
24666 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
24667 # * set ncv for FreeBSD console (treat colors with reverse specially).
24668 # * remove sgr string from qnx based on report by Xiaodan Tang
24669 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
24670 # * remove spurious commas from descriptions
24671 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
24672 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
24673 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24674 # apparently based on cp-866).
24676 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
24678 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24679 # * Replaced minitel-2 entry.
24680 # * Added MGR, ansi-nt.
24681 # * Minor corrections to xterm entries.
24682 # * Replaced EWAN telnet entry.
24683 # * Dropped the reorder script generator. It was a fossil.
24684 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24685 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24686 # the 4.4BSD Lite2 file.
24687 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
24688 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
24689 # * Updated iris-ansi; corrected vt102-w.
24690 # * Switch base xterm entry to 3.3 level.
24691 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
24693 # * Removed rmir/smir from tv92B.
24695 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
24696 # * add hds200 description (Walter Skorski)
24697 # * add beterm entry (Fred Fish)
24698 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
24699 # iris-color entries.
24700 # * add emx entries.
24701 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
24702 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
24704 # * remove sgr string from qnx based on report by Xiaodan Tang
24705 # * Added u8/u9, removed rmul/smul from sun-il.
24706 # * 4.2 tic displays \0 rather than \200.
24707 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24708 # apparently based on cp-866).
24709 # * Merged in Pavel Roskin's acsc for linux-koi8
24710 # * Corrected some erroneous \\'s to \.
24711 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
24712 # * II -> ii in pcvtXX, screen, xterm.
24713 # * Removed \n chars following ANSI escapes in sgr & friends.
24714 # * Updated Wyse entries.
24715 # * h19 corrections from Tim Pierce.
24716 # * Noted that the dm2500 has both ich and smir.
24717 # * added pccons for the Alpha under OSF/1.
24718 # * Added Sony NEWS workstation entries and cit101e-rv.
24719 # * Reverted `amiga'; to Kent Polk's version, as I'm told
24720 # the Verkuil entry messes up with Amiga Telnet.
24721 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
24722 # * Corrected attributions in 10.2.0 release notes.
24723 # * Scanned the Shuford archive for new terminfos and information.
24724 # * Removed sgr from qnx entry (Thomas Dickey).
24725 # * Added entries for ICL and Kokusai Data Systems terminals.
24726 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
24727 # * Incorporated att700 from the Boundless Technology FTP site.
24728 # * Miscellaneous contact-address and Web-page updates.
24730 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
24733 # * add nxterm and xterm-color terminfo description (request by Cristian
24734 # Gafton <gafton@redhat.com>).
24735 # * modify rxvt terminfo description to clear alternate screen before
24736 # switching back to normal screen, for compatibility with applications
24737 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
24738 # * modify linux terminfo description to reset color palette (reported
24739 # by Telford Tendys <telford@eng.uts.edu.au>).
24742 # * merge changes from current XFree86 xterm terminfo descriptions.
24745 # * Added minitel1 entries from Alexander Montaron.
24746 # * Added qnxt2 from Federico Bianchi.
24747 # * Added arm100 terminfo entries from Dave Millen.
24750 # * Added ncsa telnet entries from Francesco Potorti
24753 # * modify ncsa telnet entry to reflect color, other capabilities based on
24754 # examination of the source code - T.Dickey.
24757 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
24760 # * Added Francesco Potorti's tuned Wyse 99 entries.
24761 # * dtterm enacs correction from Alexander V. Lukyanov.
24762 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
24763 # * correct a typo in icl6404 entry.
24764 # * add xtermm and xtermc
24767 # * format most %'char' sequences to %{number}
24768 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
24769 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
24772 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
24773 # * correct initialization string in xterm-r5, add misc other features
24774 # to correspond with xterm patch #84 - TD
24777 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
24778 # * add Mathew Vernon's mach console entries
24779 # * corrections for ncsa function-keys (report by Larry Virden)
24782 # * change linux to use ncv#2, since underline does not work with color - TD
24785 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
24786 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
24787 # application modes, change kent to use the correct keypad code - TD
24790 # * add entry for Tera Term - TD
24793 # * minor improvements for teraterm entry - TD
24794 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
24795 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
24798 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
24799 # xterm and ncsa entries by removing the unneeded ones. Note that
24800 # some entries will return kend & khome versus kslt and kfnd, for
24801 # PC-style keyboards versus strict vt220 compatibility - TD
24804 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
24806 # * add 'crt' entry - TD
24807 # * correct typos in 'linux-c' entry - TD
24810 # * update entries for BSD/OS console to use klone+sgr and klone+color
24811 # (Jeffrey C Honig)
24814 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
24817 # * add linux-lat, from RedHat patches to ncurses 4.2
24820 # * add complete set of default function-key definitions for scoansi - TD.
24823 # * add cnorm, cvvis for Linux 2.2 kernels
24826 # * add kmous to xterm-r5 -TD
24827 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24828 # parent "use" clause -TD
24831 # * corrected cnorm, added el1 in 'screen' description -TD
24834 # * add ms-vt100 -TD
24837 # * corrections to beterm entry -TD
24840 # * add cygwin entry -TD
24843 # * minor corrections for beterm entry -TD
24846 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24849 # * add amiga-8bit entry
24850 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24851 # rcons-color, based on
24852 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24853 # * add alias for iris-ansi-net
24856 # * corrected scoansi entry's acsc, some function keys, add color -TD
24859 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24860 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24861 # key mapping, leaving Potorti's entries more like he named them -TD
24862 # * remove enter/exit am-mode from cygwin -TD
24865 # * correct typos in several entries (missing '[' from CSI):
24866 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24867 # strings for avt-ns -TD
24868 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24871 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24872 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24873 # * add xterm-88color and xterm-256color -TD
24876 # * add "obsolete" termcap strings -TD
24877 # * add kvt and gnome entries -TD
24880 # * correct cup string for regent100 -TD
24883 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24884 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24885 # * change OTrs capabilities to rs2 -TD
24886 # * add obsolete and extended capabilities to 'screen' -TD
24889 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24891 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24892 # and adding kcbt -TD
24895 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24896 # nonstandard resource settings -TD
24899 # * minor fixes for xterm-*, based on Debian #58530 -TD
24902 # * add several terminal types from esr's "11.0", as well as comments.
24903 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24904 # vt220-8bit, vt220-old, wy85-8bit
24907 # * add several terminal types from esr's "11.0.1" (ansi-*).
24908 # * update OTxx capabilities for changes on 2000/3/4.
24909 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24912 # * move screen's AX extension to ecma+color, modify several entries to
24913 # use that, adjusting ncv as needed -TD
24916 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24917 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24918 # in esr's version.
24921 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24922 # * correct color definition for ibm3164, make minor changes to other
24923 # IBM terminal definitions based on recent terminfo descriptions -TD
24926 # * add mgterm, from NetBSD -TD
24927 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24928 # * change cons25w to use rs2 for reset rather than rs1 -TD
24929 # * add rc/sc to aixterm based on manpage -TD
24932 # * remove ncv from xterm-16color, xterm-256color
24935 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24938 # * add Eterm (Michael Jennings)
24941 # * add amiga-vnc entry.
24944 # * correct description of Top Gun Telnet.
24945 # * add kterm-color
24948 # * add qansi* entries from QNX ftp site.
24951 # * add Matrix Orbital entries by Eric Z. Ayers).
24952 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24956 # * add S0, E0 extensions to screen's entry -TD
24959 # * several corrections based on tic's new parameter-checking code -TD
24960 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24961 # bracketing sequences that reset video attributes (\E8 would restore
24965 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24968 # * improved scoansi, based on SCO man-page, and testing console,
24969 # scoterm with tack -TD
24972 # * modify kterm to use acsc via SCS controls.
24975 # * screen 3.9.8 allows xterm mouse controls to pass-through
24978 # * remove spurious "%|" from some xterm entries.
24981 # * modify 'screen' khome/kend to match screen 3.09.08
24982 # * add examples of 'screen' customization (screen.xterm-xfree86,
24983 # screen.xterm-r6, screen.teraterm) -TD
24986 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24987 # * add "Apple_Terminal" entries -Benjamin Sittler
24988 # * remove time-delays from "Apple_Terminal" entries -TD
24989 # * make sgr entries time-delays consistent with individual caps -TD
24992 # * corrected/updated screen.xterm-xfree86
24995 # * ELKS descriptions, from Federico Bianchi
24996 # * add u6 (CSR) to Eterm (Michael Jennings).
24999 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
25000 # tic which handles names no longer than 14 characters. Add
25001 # corresponding descriptions for the Darwin PowerPC console named
25002 # "xnuppc" -Benjamin Sittler
25005 # * change kbs in mach entries to ^? (Marcus Brinkmann).
25008 # * add "putty" entry -TD
25009 # * updated "Apple_Terminal" entries -Benjamin Sittler
25012 # * add ms-vt100-color entry -TD
25013 # * add "konsole" entries -TD
25016 # * update gnome entry to Redhat 7.2 -TD
25019 # * add kf13-kf48 strings to cons25w -TD
25020 # * add pcvt25-color entry -TD
25021 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
25022 # * improve some features of scoansi entry based on SCO's version -TD
25023 # * add scoansi-new entry corresponding to OpenServer 5.0.6
25026 # * add kcbt to screen entry -TD
25029 # * add rxvt-16color, ibm+16color, mvterm entries -TD
25032 # * split out linux-basic entry, making linux-c inherit from that, and
25033 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
25034 # the history of this console type -TD
25035 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
25036 # r/g/b parameters of initc are in the range 0 to 1000 -TD
25039 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
25042 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
25043 # in the latter -TD
25046 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
25047 # * ncr260wy350pp has only 16 color pairs -TD
25048 # * add sun-type4 from NetBSD -TD
25049 # * update xterm-xfree86 to current (xterm patch #170) -TD
25050 # * add screen-bce, screen-s entries -TD
25051 # * add xterm-1002, xterm-1003 entries -TD
25054 # * update homepage for Top Gun Telnet/SSH
25057 # * reduce duplication in emx entries, added emx-base -TD
25060 # * corrected acs for screen.teraterm -TD
25061 # * add tkterm entry -TD
25064 # * cygwin changes from Charles Wilson:
25065 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
25066 # primary instead of nxterm, to match XFree86's xterm.terminfo
25067 # usage and to prevent circular links.
25068 # (rxvt): add additional codes from rxvt.org.
25069 # (rxvt-color): new alias
25070 # (rxvt-xpm): new alias
25071 # (rxvt-cygwin): like rxvt, but with special acsc codes.
25072 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
25073 # with a "native" MSWin GUI. Each takes different acsc codes,
25074 # which are both different from the "normal" rxvt's acsc.
25075 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
25076 # (cygwinDBG): ditto.
25079 # * update gnome terminal entries -TD
25082 # * add entries for djgpp 2.03 and 2.04 -TD
25085 # * add alias for vtnt -TD
25086 # * update xterm-xfree86 for XFree86 4.4 -TD
25089 # * add linux-vt (Andrey V Lukyanov)
25092 # * add screen.linux -TD
25095 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
25098 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
25099 # * add vt100+ and vt-utf8 entries -TD
25100 # * add uwin entry -TD
25103 # * add sgr strings to several common entries lacking them, e.g.,
25104 # screen, to make the entries more portable -TD
25105 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
25106 # * similar fixups for cvvis/cnorm various entries -TD
25109 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
25113 # * add xterm-xf86-v44 -TD
25114 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
25115 # on G1 being used via an ISO-2022 escape sequence (report by
25116 # Juliusz Chroboczek) -TD
25117 # * add 'hurd' entry -TD
25120 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
25122 # * align with xterm #192's use of xterm-new -TD
25123 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
25124 # * make xterm-new the default "xterm" -TD
25127 # * minor fixes for emu -TD
25129 # * add rmam/smam to linux (Trevor Van Bremen)
25130 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
25131 # * fixes for avatar0 -TD
25132 # * fixes for vp3a+ -TD
25135 # * add xterm-pc-fkeys -TD
25136 # * review/update gnome and gnome-rh90 entries (prompted by
25137 # Redhat Bugzilla #122815) -TD
25138 # * review/update konsole entries -TD
25139 # * add sgr, correct sgr0 for kterm and mlterm -TD
25140 # * correct tsl string in kterm -TD
25143 # * make ncsa-m rmacs/smacs consistent with sgr -TD
25144 # * add sgr, rc/sc and ech to syscons entries -TD
25145 # * add function-keys to decansi -TD
25146 # * add sgr to mterm-ansi -TD
25147 # * add sgr, civis, cnorm to emu -TD
25148 # * correct/simplify cup in addrinfo -TD
25149 # * corrections for gnome and konsole entries
25150 # (Redhat Bugzilla #122815) -Hans de Goede
25151 # * modify DEC entries (vt220, etc), to add sgr string, and to use
25152 # ISO-2022 strings for rmacs/smacs -TD
25155 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
25158 # * improved putty entry -Robert de Bath
25161 # * remove dch/dch1 from rxvt because they are implemented inconsistently
25162 # with the common usage of bce/ech -TD
25163 # * remove khome from vt220 (vt220's have no home key) -TD
25164 # * add rxvt+pcfkeys -TD
25167 # * modify several entries to ensure xterm mouse and cursor visibility
25168 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
25169 # Eterm, screen. (The xterm entries are left alone - old ones for
25170 # compatibility, and the new ones do not require this change) -TD
25173 # * add morphos entry -Pavel Fedin
25174 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
25175 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
25178 # * update wsvt25 entry -TD
25181 # * update pairs for xterm-88color and xterm-256color to reflect the
25182 # ncurses extended-color support -TD
25185 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
25186 # * add aixterm-16color to demonstrate 16-color capability -TD
25189 # * add media-copy to vt100 -TD
25190 # * corrected acsc string for vt52 -TD
25193 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
25195 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
25198 # * re-corrected acsc string for vt52 -TD
25201 # * corrected sun-il sgr string which referred to bold and underline -TD
25202 # * add sun-color entry -TD
25205 # * modify sgr0 in several entries to reset alternate-charset as in the
25207 # * modify sgr string of prism9 to better match the individual
25211 # * correct order of use= in rxvt-basic -TD
25214 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
25217 # * other minor fixes to cygwin based on tack -TD
25218 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
25221 # * add nsterm-16color entry -TD
25222 # * remove ncv flag from xterm-16color -TD
25223 # * remove setf/setb from xterm-256color to match xterm #209 -TD
25224 # * update mlterm entry to 2.9.2 -TD
25227 # * fixes to make nsterm-16color match report
25228 # by Christian Ebert -Alain Bench
25231 # * add xterm+256color building block -TD
25232 # * add gnome-256color, putty-256color, rxvt-256color -TD
25235 # * add hpterm-color -TD
25238 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
25239 # * add gnome-fc5 (prompted by GenToo #122566) -TD
25240 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
25241 # * improve xterm-256color by combining the ibm+16color setaf/setab
25242 # strings with SGR 48. The setf/setb strings also are cancelled here
25243 # rather than omitted so derived entries will cancel those also -Alain
25247 # * add some notes regarding copyright to terminfo.src -TD
25248 # * use rxvt+pcfkeys in Eterm -TD
25249 # * remove km and flash from gnome, Eterm and rxvt since they do not work
25250 # as one would expect (km sends ESC rather than setting the 8th bit
25252 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
25253 # * add konsole-solaris -TD
25256 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
25257 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
25258 # * modify xterm-24 to inherit from "xterm" -TD
25259 # * add xiterm entry -TD
25260 # * add putty-vt100 entry -TD
25261 # * corrected spelling of Michael A Dorman's name, prompted by
25262 # http://www.advogato.org/person/mdorman/diary.html -TD
25265 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
25266 # * update xterm+pcfkeys to match xterm #216 -TD
25269 # * make descriptions of xterm entries consistent with its terminfo -TD
25272 # * add xfce, mgt -TD
25275 # * correct acsc string in kterm -TD
25278 # * add kon entry -TD
25279 # * remove invis from linux and related entries, add klone+sgr8 for those
25280 # that implement the feature (or have not been shown to lack it) -TD
25283 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
25284 # * minor improvements to rxvt+pcfkeys -TD
25287 # * fix a few typos in if/then/else expressions -TD
25290 # * add several GNU Screen variations with 16- and 256-colors, and
25291 # status line (Alain Bench).
25294 # * add Newbury Data entries (Jean-Charles Billaud).
25297 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
25300 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
25301 # * add konsole-256color entry -TD
25304 # * add 9term entry (request by Juhapekka Tolvanen) -TD
25307 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
25308 # * add shift-control- and control-modified keys for rxvt editing
25310 # * update mlterm entry to 2.9.3 -TD
25311 # * add mlterm+pcfkeys -TD
25314 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
25315 # xterm+pcc0, etc., to make the corresponding building blocks reflect
25316 # xterm's capabilities -TD
25317 # * add mrxvt entry -TD
25318 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
25321 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
25324 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
25325 # xterm starting with xterm patch #216 -TD
25326 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
25327 # to match xterm #230 -TD
25328 # * extend xterm+pccX entries to match xterm #230 -TD
25329 # * add xterm+app, xterm+noapp, from xterm #230 -TD
25330 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
25333 # * add screen.rxvt -TD
25336 # * add screen+fkeys (prompted by Debian #478094) -TD
25339 # * add screen.mlterm -TD
25340 # * improve mlterm and mlterm+pcfkeys -TD
25343 # * add Eterm-256color, Eterm-88color -TD
25344 # * add rxvt-88color -TD
25347 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
25348 # original to teraterm2.3 -TD
25349 # * update "gnome" to 2.22.3 -TD
25350 # * update "konsole" to 1.6.6 -TD
25351 # * add "aterm" -TD
25352 # * add "linux2.6.26" -TD
25355 # * change several \E[2g (clear tab at current column) to \E[3g
25356 # (clear all tabs) to match definition for tbc capability -TD
25359 # * add eterm-color -TD
25362 # * add screen.Eterm -TD
25365 # * correct typo in pfkey of ansi.sys-old
25366 # (report by Kalle Olavi Niemitalo)
25367 # * move function- and cursor-keys from emx-base to ansi.sys, and create
25368 # a pfkey capability which handles F1-F48 -TD
25371 # * add vwmterm entry (Bryan Christ)
25374 # * change ncv and op capabilities in sun-color to match Sun's entry for
25375 # this (report by Laszlo Peter)
25376 # * improve interix smso by using reverse rather than bold (report by
25377 # Kristof Zelechovski).
25380 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
25381 # * add linux-16color (Benjamin Sittler)
25382 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
25383 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
25384 # * add ccc and initc capabilities to xterm-16color -TD
25387 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
25390 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
25393 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
25394 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
25397 # * add bterm (bogl 0.1.18) -TD
25398 # * minor fix to rxvt+pcfkeys -TD
25401 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
25404 # * add several screen-bce.XXX entries -TD
25407 # * modify screen-bce.XXX entries to exclude ech, since screen's color
25408 # model does not clear with color for that feature -TD
25411 # * rename atari and st52 to atari-old, st52-old, use newer entries from
25412 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
25415 # * add mlterm-256color entry -TD
25418 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
25419 # the alternate character set (patch by Nicholas Marriott)
25422 # * improve acsc for vt52 (Benjamin Sittler)
25423 # * modify nsterm entries for consistent sgr/sgr0 -TD
25424 # * modify xnuppc entries for consistent sgr/sgr0 -TD
25425 # * add invis to tek4115 sgr -TD
25428 # * reformat acsc strings to canonical format -TD
25431 # * add "XT" capability to entries for terminals that support both
25432 # xterm-style mouse- and title-controls, for "screen" which
25433 # special-cases TERM beginning with "xterm" or "rxvt" -TD
25436 # * fill in no-parameter forms of cursor-movement where a parameterized
25437 # form is available -TD
25438 # * fill in missing cursor controls where the form of the controls is
25440 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
25443 # * correct comparison used for setting 16-colors in linux-16color
25444 # entry (Novell #644831) -TD
25445 # * improve linux-16color entry, using "dim" for color-8 which makes it
25446 # gray rather than black like color-0 -TD
25449 # * make "vte" the principal entry defining "gnome", since GNOME terminal
25450 # is merely one of several terminals whose behavior is provided by this
25454 # * fix typo in rmso for tek4106 -Goran Weinholt
25457 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
25458 # * also suppress ncv in konsole-base -TD
25461 # * add U8 feature to denote entries for terminal emulators which do not
25462 # support VT100 SI/SO when processing UTF-8 encoding -TD
25463 # * add xterm-utf8 as a demo of the U8 feature -TD
25466 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
25469 # * update minix entry to minix 3.2 (Thomas Cort).
25472 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
25473 # * remove a backslash which continued comment, obscuring altos3
25474 # definition with OpenBSD toolset (Nicholas Marriott).
25477 # * add/use xterm+tmux chunk from xterm #271 -TD
25478 # * resync xterm-new entry from xterm #271 -TD
25479 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
25480 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
25481 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
25484 # * add kich1 to sun (Yuri Pankov)
25485 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
25488 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
25491 # * minor cleanup of X-terminal emulator section -TD
25492 # * add terminator entry -TD
25493 # * add simpleterm entry -TD
25496 # * add xterm+kbs fragment from xterm #272 -TD
25499 # * add pccon entries for OpenBSD console (Alexei Malinin)
25502 # * corrected old changelog comments -TD
25505 # * add putty-sco -TD
25508 # * add mach-gnu (Samuel Thibault)
25509 # * add mach-gnu-color, tweaks to mach-gnu -TD
25510 # * make sgr for sun-color agree with smso -TD
25511 # * make sgr for prism9 agree with other caps -TD
25512 # * make sgr for icl6404 agree with other caps -TD
25513 # * make sgr for ofcons agree with other caps -TD
25514 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
25515 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
25516 # * make sgr for avt-ns agree with other caps -TD
25519 # * make sgr for xterm-pcolor agree with other caps -TD
25520 # * make sgr for att5425 agree with other caps -TD
25521 # * make sgr for att630 agree with other caps -TD
25522 # * make sgr for linux entries agree with other caps -TD
25523 # * make sgr for tvi9065 agree with other caps -TD
25524 # * make sgr for ncr260vt200an agree with other caps -TD
25525 # * make sgr for ncr160vt100pp agree with other caps -TD
25526 # * make sgr for ncr260vt300an agree with other caps -TD
25527 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
25528 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
25531 # * correct order of use-clauses in st-256color -TD
25534 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
25537 # * document all of the user-defined capabilities in one place -TD
25538 # * add XT to some places to improve usefulness for other applications
25539 # than screen, which would like to pretend that xterm's title is
25540 # a status-line. -TD
25541 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
25542 # of ordering and overrides -TD
25545 # * add msgr to vt420, similar DEC vtXXX entries -TD
25546 # * add several missing vt420 capabilities from vt220 -TD
25547 # * factor out ansi+pp from several entries -TD
25548 # * change xterm+sl and xterm+sl-twm to include only the status-line
25549 # capabilities and not "use=xterm", making them more generally useful
25550 # as building-blocks -TD
25551 # * add dec+sl building block, as example -TD
25554 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
25555 # * add eslok flag to dec+sl -TD
25556 # * dec+sl applies to vt320 and up -TD
25557 # * drop wsl width from xterm+sl -TD
25558 # * reuse xterm+sl in putty and nsca-m -TD
25559 # * add ansi+tabs to vt520 -TD
25560 # * add ansi+enq to vt220-vt520 -TD
25563 # * remove p6 (bold) from opus3n1+ for consistency -TD
25564 # * remove acs stuff from env230 per clues in Ingres termcap -TD
25565 # * modify env230 sgr/sgr0 to match other capabilities -TD
25566 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
25567 # * make sgr for dku7202 agree with other caps -TD
25568 # * make sgr for ibmpc agree with other caps -TD
25569 # * make sgr for tek4107 agree with other caps -TD
25570 # * make sgr for ndr9500 agree with other caps -TD
25571 # * make sgr for sco-ansi agree with other caps -TD
25572 # * make sgr for d410 agree with other caps -TD
25573 # * make sgr for d210 agree with other caps -TD
25574 # * make sgr for d470c, d470c-7b agree with other caps -TD
25577 # * rewrite vt520 entry based on vt420 -TD
25578 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
25581 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
25582 # analysis by Martin Husemann).
25583 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
25584 # Onno van der Linden).
25585 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
25586 # * add kdch1, etc., to qvt108 -TD
25587 # * add dl1/il1 to some entries based on dl/il values -TD
25588 # * add dl to simpleterm -TD
25591 # * modify some older xterm entries to align with xterm source -TD
25592 # * separate "xterm-old" alias from "xterm-r6" -TD
25595 # * add E3 to xterm-basic and putty -TD
25598 # * add nsterm-256color, make this the default nsterm -TD
25599 # * remove bw from nsterm-bce, per testing with tack -TD
25602 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
25603 # (patch by Christian Persch).
25606 # * reviewed vte-2012, reverted most of the change since it was incorrect
25607 # based on testing with tack -TD
25608 # * un-cancel the initc in vte-256color, since this was implemented
25609 # starting with version 0.20 in 2009 -TD
25612 # * correct typo in sgr string for sun-color,
25613 # add bold for consistency with sgr,
25614 # change smso for consistency with sgr -TD
25615 # * correct typo in sgr string for terminator -TD
25616 # * add blink to the attributes masked by ncv in linux-16color (report
25617 # by Benjamin Sittler)
25620 # * change initialization for vt220, similar entries for consistency
25621 # with cursor-key strings (NetBSD #47674) -TD
25622 # * further improvements to linux-16color (Benjamin Sittler)
25625 # * move nsterm-related entries out of "obsolete" section to more
25626 # plausible "ansi consoles" -TD
25627 # * additional cleanup of table-of-contents by reordering -TD
25630 # * added note to clarify Terminal.app's non-emulation of the various
25631 # terminal types listed in the preferences dialog -TD
25634 # * use TS extension to describe xterm's title-escapes -TD
25635 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
25636 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
25637 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
25638 # (Debian #727119).
25639 # * simplify pfkey expression in ansi.sys -TD
25642 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
25645 # * updated notes for wsvt25 based on tack and vttest -TD
25646 # * add teken entry to show actual properties of FreeBSD's "xterm"
25650 # * add terminology entry -TD
25651 # * add mlterm3 entry, use that as "mlterm" -TD
25652 # * inherit mlterm-256color from mlterm -TD
25655 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
25658 # * cancel ccc in putty-256color and konsole-256color for consistency
25659 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
25660 # * add xterm+256setaf building block for various terminals which only
25661 # get the 256-color feature half-implemented -TD
25662 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
25666 # * add vt520ansi (Mike Gran)
25669 # * correct several entries which had termcap-style padding used in
25670 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
25671 # * correct syntax for padding in some entries: dg211, h19 -TD
25672 # * correct ti924-8 which had confused padding versus octal escapes -TD
25673 # * correct padding in sbi entry -TD
25676 # * update xterm-new to xterm patch #305 -TD
25677 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
25678 # (italic). This was a long-ago typo in screen 3.1.1 which was
25679 # overlooked until a few terminal emulators implemented the feature -TD
25682 # > fix regression in screen terminfo entries (reports by Christian
25683 # Ebert, Gabriele Balducci) -TD
25684 # + revert the change to screen; see notes for why this did not work -TD
25685 # + cancel sitm/ritm for entries which extend "screen", to work around
25686 # screen's hardcoded behavior for SGR 3 -TD
25689 # + modify sgr for screen.xterm-new to support dim capability -TD
25690 # + add dim capability to nsterm+7 -TD
25691 # + cancel dim capability for iterm -TD
25692 # + add dim, invis capabilities to vte-2012 -TD
25693 # + add sitm/ritm to konsole-base and mlterm3 -TD
25696 # + add xterm-1005 and xterm-1006 entries, with suggested extension
25697 # capability "xm" -TD
25700 # + update test-report for mrxvt -TD
25703 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
25706 # + reviewed terminology 0.6.1, add function key definitions. None of
25707 # the vt100-compatibility issues were improved -TD
25710 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
25711 # + add several key definitions to nsterm-bce to match preconfigured
25712 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
25715 # + remove unnecessary ';' from E3 capabilities -TD
25716 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
25717 # + split-out recent change to nsterm-bce as nsterm-build326, and add
25718 # nsterm-build342 to reflect changes with successive releases of OSX
25719 # (discussion with Leonardo B Schenkel)
25720 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
25724 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
25725 # + add several screen.XXX entries to support the respective variations
25726 # for 256 colors -TD
25729 # + add putty+fnkeys* building-block entries -TD
25732 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
25733 # + add vte-2014, update vte to use that -TD
25736 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
25737 # from xterm-new (report by Richard Birkett) -TD
25740 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
25741 # + fixes for st 0.5 from testing with tack -TD
25744 # + updated minitel entries to fix kel problem with emacs, and add
25745 # minitel1b-nb (Alexandre Montaron).
25746 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
25747 # + replace some dead URLs in commands with equivalents from the
25748 # Internet Archive -TD
25751 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
25752 # + add keys f12-f124 to pccon+keys (Tati Chevron).
25755 # + fix some inconsistencies in the pccon* entries -TD
25758 # + add viewdata (Alexandre Montaron).
25761 # + tidy up comments about hardcoded 256color palette (report by
25762 # Leonardo Brondani Schenkel) -TD
25763 # + add putty-noapp entry, and amend putty entry to use application mode
25764 # for better consistency with xterm (report by Leonardo Brondani
25768 # + add 'oc' capability to xterm+256color, allowing palette reset for
25772 # + modify linux2.6 entry to improve line-drawing -TD
25773 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
25776 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
25777 # reset palette using "oc" string as in linux -TD
25780 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
25781 # that could be returned -TD
25782 # + added a few capabilities fixed in recent vte -TD
25785 # + correct a typo in interix -TD
25788 # + updated minitel entries to use status line with screen(1), as well as
25789 # printing special G2 videotex chars like french accentuated glyph
25790 # using special cap XC= (patch by Alexandre Montaron).
25793 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
25794 # + correct rs2 string for vt100-nam -TD
25797 # + modify linux-16color to not mask dim, standout or reverse with the
25798 # ncv capability -TD
25799 # + add 0.1sec mandatory delay to flash capabilities using the VT100
25800 # reverse-video control -TD
25801 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
25802 # entry, to avoid conflict with the user-defined mapping. The reset
25803 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
25806 # + merge current st description (report by Harry Gindi) -TD
25809 # + modify flash capability for linux and wyse entries to put the delay
25810 # between the reverse/normal escapes rather than after -TD
25813 # + minor comment-fixes to help automate links to bug-urls -TD
25814 # + add dvtm, dvtm-256color -TD
25815 # + add settings corresponding to xterm-keys option to tmux entry to
25816 # reflect upcoming change to make that option "on" by default
25817 # (patch by Nicholas Marriott).
25818 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
25819 # + add dumb-emacs-ansi -TD
25822 # + correct a few spelling errors in comments -TD
25826 # + add vt100+4bsd building block, use that for older terminals rather
25827 # than "vt100" which is now mostly used as a building block for
25828 # terminal emulators -TD
25829 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
25830 # (report/analysis by Robert King) -TD
25833 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
25834 # + add smso for env230, to match sgr -TD
25835 # + remove p7/protect from sgr in fbterm -TD
25836 # + drop setf/setb from fbterm; setaf/setab are enough -TD
25837 # + make xterm-pcolor sgr consistent with other capabilities -TD
25838 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
25839 # (discussion with Nicholas Marriott)
25842 # + correct missing comma-separator between string capabilities in
25843 # icl6402 and m2-nam -TD
25844 # + update formatting with ncurses 6.0.20170422 -TD
25845 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
25846 # add alias ansiterm (report by Robert King).
25849 # + reformatted using hexadecimal numbers to improve readability -TD
25852 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
25853 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
25854 # + add "rep" to xterm-new, available since 1997/01/26 -TD
25855 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
25859 # + update "iterm" entry -TD
25860 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
25863 # + update notes on user-defined capabilities -TD
25866 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
25869 # + add "op" to xterm+256setaf -TD
25870 # + reviewed terminology 1.0.0 -TD
25871 # + reviewed st 0.7 -TD
25874 # + modify old terminology entry and a few other terminal emulators to
25875 # account for xon -TD
25876 # + correct sgr string for tmux, which used screen's "standout" code
25877 # rather than the standard code (patch by Roman Kagan)
25878 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
25879 # those correspond to the non-sgr settings where they differ, but
25880 # otherwise use ECMA-48 consistently:
25881 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
25882 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
25883 # st-0.7, vi603, vwmterm -TD
25886 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
25887 # blocks from xterm #331 -TD
25888 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
25890 # + modify xterm+256color and xterm+256setaf to use correct number of
25891 # color pairs, for ncurses 6.1 -TD
25892 # + add rs1 capability to xterm-256color -TD
25893 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
25894 # match xterm #272, reflecting packager's changes -TD
25895 # + remove "boolean" Se, Ss from st-0.7 -TD
25898 # + add konsole-direct and st-direct -TD
25899 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
25900 # direct-colors are wanted -TD
25903 # + add vte-direct -TD
25904 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
25908 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
25909 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
25910 # mode does not work with those programs. konsole is debatable -TD
25911 # + add "termite" entry (report by Markus Pfeiffer) -TD
25914 # + trim "XT" from screen entry -TD
25915 # + modify iterm to use xterm+sl-twm building block -TD
25916 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
25917 # konsole's removal in 2008 -TD
25918 # + expanded the history section of konsole to explain its flawed
25919 # imitation of xterm's keyboard -TD
25920 # + use xterm+x11mouse in screen.* entries because screen does not yet
25921 # support xterm's 1006 mode -TD
25922 # + add nsterm-build400 for macOS 10.13 -TD
25923 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
25924 # + update vte to vte-2017 -TD
25925 # + add ecma+strikeout to vte-2017 -TD
25926 # + add iterm2-direct -TD
25927 # + updated teraterm, added teraterm-256color -TD
25928 # + add mlterm-direct -TD
25929 # + add descriptions for ANSI building-blocks -TD
25932 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
25933 # + fix remaining flash capabilities with trailing mandatory delays -TD
25936 # + trim some redundant capabilities from st-0.7 -TD
25937 # + trim unnecessary setf/setb from interix -TD
25940 # + trim spurious whitespace from tmux in 2018-02-24 changes;
25941 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR
25942 # (report by C Anthony Risinger)
25943 # + improve iterm2 using some xterm features which it has adapted -TD
25946 # + add acsc string to vi200 (Nibby Nebbulous)
25947 # add right/down-arrow to vi200's acsc -TD
25950 # + corrected acsc for wy50 -TD
25951 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
25952 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD
25955 # + fix typo in tvi955 -TD
25956 # + corrected acsc for regent60 -TD
25957 # + add alias n7900 -TD
25960 # + corrected acsc for tvi950 -TD
25961 # + remove bogus kf0 from tvi950 -TD
25962 # + added function-key definitions to agree with Televideo 950 manual -TD
25963 # + add bel to tvi950 -TD
25964 # + add shifted function-keys to regent60 -TD
25965 # + renumber regent40 function-keys to match manual -TD
25966 # + add cd (clr_eos) to adds200 -TD
25969 # + add OpenGL clients alacritty and kitty -TD
25970 # + add Smulx for tmux, vte-2018 -Nicholas Marriott
25972 ######## SHANTIH! SHANTIH! SHANTIH!