1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2010/02/13 18:46:49 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+pp|ansi printer port,
380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The IBM PC alternate character set. Plug this into any Intel console entry.
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386 # ROM graphics for control characters such as the diamond, up- and down-arrow.
387 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
388 # will work with any Intel console, they all seem to have inherited \E[11m
389 # from the ANSI.SYS de-facto standard.
390 klone+acs|alternate character set for ansi.sys displays,
391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392 rmacs=\E[10m, smacs=\E[11m,
394 # Highlight controls corresponding to the ANSI.SYS standard. Most
395 # console drivers for Intel boxes obey these. Makes the same assumption
396 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
397 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398 klone+sgr|attribute control for ansi.sys displays,
399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400 rmso=\E[m, rmul=\E[m,
401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
405 # Most Intel boxes do not treat "invis" (invisible) text.
406 klone+sgr8|attribute control for ansi.sys displays,
408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
411 # Highlight controls corresponding to the ANSI.SYS standard. *All*
412 # console drivers for Intel boxes obey these. Does not assume \E[11m will
413 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414 # diamond and arrow characters under curses.
415 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
422 # KOI8-R (RFC1489) acs (alternate character set)
423 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426 rmacs=\E[10m, smacs=\E[11m,
428 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
429 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
430 # but equivalent strings that don't rely on that coincidence:
431 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434 # They match a subset of ECMA-48.
435 klone+color|color control for ansi.sys and ISO6429-compatible displays,
436 colors#8, ncv#3, pairs#64,
437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
439 # This is better than klone+color, it doesn't assume white-on-black as the
440 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
441 ecma+color|color control for ECMA-48-compatible terminals,
443 colors#8, ncv#3, pairs#64,
444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
446 # Attribute control for ECMA-48-compatible terminals
447 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
450 # For comparison, here are all the capabilities implied by the Intel
451 # Binary Compatibility Standard (level 2) that fit within terminfo.
452 # For more detail on this rather pathetic standard, see the comments
453 # near the end of this file.
454 ibcs2|Intel Binary Compatibility Standard prescriptions,
455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
456 cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
457 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
458 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
459 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
460 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
462 #### ANSI/ECMA-48 terminals and terminal emulators
464 # See near the end of this file for details on ANSI conformance.
465 # Don't mess with these entries! Lots of other entries depend on them!
467 # This section lists entries in a least-capable to most-capable order.
468 # if you're in doubt about what `ANSI' matches yours, try them in that
469 # order and back off from the first that breaks.
471 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
472 # and more than one page of memory. It uses local motions instead of
473 # direct cursor addressing, and makes almost no assumptions. It does
474 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
475 ansi-mr|mem rel cup ansi,
477 cols#80, lines#24, use=vanilla, use=ansi+erase,
480 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
481 # beware of screen size problems and memory relative cursor addressing.
482 ansi-mini|any ansi terminal with pessimistic assumptions,
484 cols#80, lines#24, use=vanilla, use=ansi+cup,
487 # ansi-mtabs adds relative addressing and minimal tab support
488 ansi-mtabs|any ansi terminal with pessimistic assumptions,
490 ht=^I, use=ansi+local1, use=ansi-mini,
492 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
494 # The following is an entry for the full ANSI 3.64 (1977). It lacks
495 # padding, but most terminals using the standard are "fast" enough
496 # not to require any -- even at 9600 bps. If you encounter problems,
497 # try including the padding specifications.
499 # Note: the :as: and :ae: specifications are not implemented here, for
500 # the available termcap documentation does not make clear WHICH alternate
501 # character set to specify. ANSI 3.64 seems to make allowances for several.
502 # Please make the appropriate adjustments to fit your needs -- that is
503 # if you will be using alternate character sets.
505 # There are very few terminals running the full ANSI 3.64 standard,
506 # so I could only test this entry on one verified terminal (Visual 102).
507 # I would appreciate the results on other terminals sent to me.
509 # Please report comments, changes, and problems to:
511 # U.S. MAIL: Hugh Hansard
514 # Atlanta, GA. 30322.
516 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
518 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
519 ansi77|ansi 3.64 standard 1977 version,
521 cols#80, it#8, lines#24,
522 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
523 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
524 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
525 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
527 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
528 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
529 smso=\E[7m, smul=\E[4m,
531 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
532 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
533 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
534 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
535 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
536 # to confuse many emulators. On the other hand, we can count on these programs
537 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
538 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
539 # ANSI.SYS influence.
540 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
541 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
543 cols#80, it#8, lines#24,
544 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
545 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
546 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
547 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
548 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
550 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
551 lines#25, use=pcansi-m,
552 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
553 lines#33, use=pcansi-m,
554 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
555 lines#43, use=pcansi-m,
556 # The color versions. All PC emulators do color...
557 pcansi|ibm-pc terminal programs claiming to be ansi,
558 use=klone+color, use=pcansi-m,
559 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
560 lines#25, use=pcansi,
561 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
562 lines#33, use=pcansi,
563 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
564 lines#43, use=pcansi,
566 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
567 # If you want pound signs rather than dollars, replace `B' with `A'
568 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
569 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
570 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
572 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
573 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
574 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
575 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
576 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
577 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
578 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
579 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
580 vpa=\E[%i%p1%dd, use=pcansi-m,
582 ansi+enq|ncurses extension for ANSI ENQ,
583 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
586 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
587 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
588 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
589 ansi|ansi/pc-term compatible with color,
590 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
592 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
593 # all the normal ANSI stuff with no extensions. It assumes
594 # insert/delete line/char is there, so it won't work with
595 # vt100 clones. It assumes video attributes for bold, blink,
596 # underline, and reverse, which won't matter much if the terminal
597 # can't do some of those. Padding is assumed to be zero, which
598 # shouldn't hurt since xon/xoff is assumed.
599 ansi-generic|generic ansi standard terminal,
601 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
602 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
603 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
604 use=ansi+sgrbold, use=ansi+arrows,
606 #### DOS ANSI.SYS variants
608 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
609 # documentation (except for the keyboard key reassignment feature, which
610 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
611 # though undocumented. The <pfkey> capability is untested but should work for
612 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
613 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
614 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
615 OTbs, am, mir, msgr, xon,
617 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
618 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
619 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
620 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
621 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
622 u7=\E[6n, use=klone+color, use=klone+sgr8,
624 # Keypad: Home=\0G Up=\0H PrPag=\0I
625 # ka1,kh kcuu1 kpp,ka3
627 # Left=\0K 5=\0L Right=\0M
630 # End=\0O Down=\0P NxPag=\0Q
631 # kc1,kend kcud1 kc3,knp
636 # On keyboard with 12 function keys,
637 # shifted f-keys: F13-F24
638 # control f-keys: F25-F36
639 # alt f-keys: F37-F48
640 # The shift/control/alt keys do not modify each other, but alt overrides both,
641 # and control overrides shift.
643 # <pfkey> capability for F1-F48 -TD
644 ansi.sys|ANSI.SYS 3.1 and later versions,
645 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
646 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
647 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
648 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
649 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
650 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
651 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
652 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
653 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
654 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
655 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
656 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
657 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
661 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
662 # This should only be used when the terminal emulator cannot redefine the keys.
663 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
664 # definitions must be restored. If the terminal emulator is quit while in vi
665 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
666 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
667 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
668 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
669 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
670 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
671 # Consequently the End keypad key could not be set (it is relatively safe and
672 # actually useful because it sends ^@ O, which beeps and opens a line above).
673 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
674 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
675 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
676 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
679 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
680 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
681 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
682 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
685 # See ansi.sysk and nansi.sys above.
686 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
687 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
688 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
691 #### ANSI console types
696 # BeOS entry for Terminal program Seems to be almost ANSI
697 beterm|BeOS Terminal,
698 am, eo, mir, msgr, xenl, xon,
699 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
700 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
701 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
702 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
703 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
704 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
705 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
706 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
707 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
708 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
709 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
710 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
711 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
712 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
713 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
714 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
715 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
716 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
717 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
718 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
724 # This entry is good for the 1.2.13 or later version of the Linux console.
726 # ***************************************************************************
729 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
730 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
731 # * character. Here are the keymap replacement lines that will set this up: *
733 # keycode 15 = Tab Tab
734 # alt keycode 15 = Meta_Tab
735 # shift keycode 15 = F26
736 # string F26 ="\033[Z"
738 # * This has to use a key slot which is unfortunate (any unused one will *
739 # * do, F26 is the higher-numbered one). The change ought to be built *
740 # * into the kernel tables. *
742 # ***************************************************************************
744 # All linux kernels since 1.2.13 (at least) set the screen size
745 # themselves; this entry assumes that capability.
747 linux-basic|linux console,
748 am, bce, eo, mir, msgr, xenl, xon,
750 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
751 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
752 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
753 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
754 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
755 el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
756 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
757 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
758 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
759 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
760 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
761 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
762 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
763 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
764 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
765 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
766 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
767 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
768 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
769 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
772 linux-m|Linux console no color,
774 setab@, setaf@, setb@, setf@, use=linux,
776 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
777 # and it matters, turn off <ccc>. The %02x escape used to implement this is
778 # not supposedly back-portable to older SV curses (although it has worked fine
779 # on Solaris for several years) and not supported in ncurses versions before
781 linux-c-nc|linux console with color-change,
783 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
784 oc=\E]R, use=linux-basic,
785 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
786 linux-c|linux console 1.3.6+ for older ncurses,
788 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
789 oc=\E]R, use=linux-basic,
791 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
792 # get a block cursor for cvvis.
793 # reported by Frank Heckenbach <frank@g-n-u.de>.
795 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
796 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
798 # Subject: linux 2.6.26 vt back_color_erase
799 # Changes to the Linux console driver broke bce model as reported in
800 # https://bugzilla.novell.com/show_bug.cgi?id=418613
802 # http://lkml.org/lkml/2008/4/26/305
803 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
804 linux2.6.26|linux console w/o bce,
807 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
808 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
809 ich@, ich1@, use=linux,
811 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
812 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
813 linux-koi8|linux with koi8 alternate character set,
814 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
815 use=linux, use=klone+koi8acs,
817 # Another entry for KOI8-r with Qing Long's acsc.
818 # (which one better complies with the standard?)
819 linux-koi8r|linux with koi8-r alternate character set,
820 use=linux, use=klone+koi8acs,
822 # Entry for the latin1 and latin2 fonts
823 linux-lat|linux with latin1 or latin2 alternate character set,
824 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
827 # This uses graphics from VT codeset instead of from cp437.
828 # reason: cp437 (aka "straight to font") is not functional under luit.
829 # from: Andrey V Lukyanov <land@long.yar.ru>.
830 linux-vt|linux console using VT codes for graphics,
831 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
832 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
835 # This is based on the Linux console (relies on the console to perform some
836 # of the functionality), but does not recognize as many control sequences.
837 # The program comes bundled with an old (circa 1998) copy of the Linux
838 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
839 # \E* move cursor to home, as as \E[H
841 # \EE move cursor to beginning of row
842 # \E[y,xf same as \E[y,xH
844 # Note: The status-line support is buggy (dsl does not work).
845 kon|kon2|jfbterm|Kanji ON Linux console,
847 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
848 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
851 # 16-color linux console entry; this works with a 256-character
852 # console font but bright background colors turn into dim ones when
853 # you use a 512-character console font. This uses bold for bright
854 # foreground colors and blink for bright background colors.
855 linux-16color|linux console with 16 colors,
856 colors#16, ncv#54, pairs#256,
857 setab=\E[4%p1%{7}%m%d%?%p1%{7}%>%t;5%e;25%;m,
858 setaf=\E[3%p1%{7}%m%d%?%p1%{7}%>%t;1%e;21%;m,
861 # bterm (bogl 0.1.18)
862 # Implementation is in bogl-term.c
863 # Key capabilities from linux terminfo entry
866 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
867 # bterm does not support sgr, since it only processes one parameter -TD
868 bterm|bogl virtual terminal,
870 colors#8, cols#80, lines#24, pairs#64,
871 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
872 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
873 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
874 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
875 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
876 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
877 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
878 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
879 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
880 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
881 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
882 op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
883 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
884 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
889 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
892 cols#80, it#8, lines#25,
893 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
894 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
895 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
896 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
897 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
898 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
899 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
900 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
901 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
902 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
903 smso=\E[7m, smul=\E[4m,
904 mach-bold|Mach Console with bold instead of underline,
905 rmul=\E[0m, smul=\E[1m, use=mach,
906 mach-color|Mach Console with ANSI color,
908 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
909 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
911 # From: Marcus Brinkmann
912 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
914 # Comments in the original are summarized here:
916 # hurd uses 8-bit characters (km).
918 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
920 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
921 # have the eat_newline_glitch. It doesn't support setting or removing tab
924 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
925 # one byte instead three.
927 # <ich1> is not included because hurd has insert mode.
929 # hurd doesn't use ^J for scrolling, because this could put things into the
932 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
933 # This is a GNU extension.
935 # The original has commented-out ncv, but is restored here.
937 # Reading the source, RIS resets cnorm, but not xmous.
938 hurd|The GNU Hurd console server,
939 am, bce, bw, eo, km, mir, msgr, xon,
940 colors#8, it#8, ncv#18, pairs#64,
941 acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
942 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
943 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
944 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
945 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
946 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
947 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
948 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
949 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
950 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
951 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
952 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
953 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
954 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
955 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
956 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
957 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
958 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
959 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
960 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
961 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
962 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
963 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
964 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
965 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
971 # OSF/1 1.1 Snapshot 2
972 pmcons|pmconsole|PMAX console,
975 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
976 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
977 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
979 # SCO console and SOS-Syscons console for 386bsd
980 # (scoansi: had unknown capabilities
981 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
982 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
983 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
984 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
985 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
986 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
987 # on the <smacs>=\E[12m -- esr)
989 # klone+sgr-dumb is an error since the acsc does not match -TD
991 # In this description based on SCO's keyboard(HW) manpage list of default
992 # function key values:
993 # F13-F24 are shifted F1-F12
994 # F25-F36 are control F1-F12
995 # F37-F48 are shift+control F1-F12
997 # hpa/vpa work in the console, but not in scoterm:
1001 # SCO's terminfo uses
1004 # which do not work (console or scoterm).
1006 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1007 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1008 OTbs, am, bce, eo, xon,
1009 colors#8, cols#80, it#8, lines#25, pairs#64,
1010 acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1011 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1012 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1013 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1014 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1015 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1016 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1017 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1018 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1019 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1020 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1021 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1022 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1023 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1024 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1025 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1026 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1027 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1028 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1029 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1030 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1031 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1032 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1033 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1034 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1035 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1036 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1038 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1039 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1040 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1041 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
1042 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1043 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1044 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1045 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1046 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1048 # make this easy to change...
1049 scoansi|SCO Extended ANSI standard crt,
1052 # This actually describes the generic SVr4 display driver for Intel boxes.
1053 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
1054 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1055 att6386|at386|386at|AT&T WGS 6386 console,
1057 cols#80, it#8, lines#25,
1058 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1059 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1060 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1061 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1062 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1063 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1064 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1065 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1066 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1067 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1068 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1069 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1070 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1071 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1072 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1073 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1075 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1076 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1077 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1078 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1079 pc6300plus|AT&T 6300 plus,
1082 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1083 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1084 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1085 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1086 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1087 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1088 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1089 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1090 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1091 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1093 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1095 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1096 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1097 # is broken. All the special key sequences are broken, making it unusable
1098 # with Emacs. The problem stems from the following:
1100 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1101 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1102 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1103 # uses resizable terminal windows, but the bundled terminal program always
1104 # uses an 80x24 window (and doesn't support seem to support a 132-column
1107 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1108 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1109 # access method".) tam includes support for real, overlapping windows,
1110 # onscreen function key labels, and bitmap graphics. But since the primary
1111 # user interface on the UNIX PC was a GUI program (ua, for "user
1112 # assistant",) and remote administration was considered important for the
1113 # machine, tam also supported VT100-compatible terminals attached to the
1114 # serial port or used across the StarLan network. To simulate the extra keys
1115 # not present on a VT100, users could press ESC and a two-letter sequence,
1116 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1117 # however, were not the same as those sent by the actual Undo key. The
1118 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1119 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1120 # have the full documentation and several programs which use tam. It also
1121 # used an extended terminfo format to describe key sequences, special
1122 # highlighting modes, etc.)
1124 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1125 # there are two sequences for every key-modifier combination (local keyboard
1126 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1127 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1128 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1129 # seem to have been built from the manual describing the VT100 sequences.
1130 # This means it doesn't work for a real live UNIX PC.
1132 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1133 # character set". Rather than the VT100 graphics you might expect, it allows
1134 # up to 8 custom fonts to be loaded at any given time. This means that
1135 # programs expecting VT100 graphics will usually be disappointed. For this
1136 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1137 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1138 # manpage), should you wish to do so:
1140 # SGR10 - Select font 0 - ESC [ 10 m or SO
1141 # SGR11 - Select font 1 - ESC [ 11 m or SI
1142 # SGR12 - Select font 2 - ESC [ 12 m
1144 # SGR17 - Select font 7 - ESC [ 17 m
1146 # Graphics for line drawing are not reliably found at *any* character
1147 # location because the UNIX PC has dynamically reloadable fonts. I use font
1148 # 0 for regular text and font 1 for italics, but this is by no means
1149 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1151 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1152 # distributed terminfo.
1154 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1155 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1156 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1157 # attached by serial cable. In Emacs, even the Undo key works, and many
1158 # applications can now use the F1-F8 keys.
1161 # Terminfo entry for the AT&T Unix PC 7300
1162 # from escape(7) in Unix PC 7300 Manual.
1163 # Somewhat similar to a vt100-am (but different enough
1164 # to redo this from scratch.)
1166 # /***************************************************************
1168 # * FONT LOADING PROGRAM FOR THE UNIX PC
1170 # * This routine loads a font defined in the file ALTFONT
1171 # * into font memory slot #1. Once the font has been loaded,
1172 # * it can be used as an alternative character set.
1174 # * The call to ioctl with the argument WIOCLFONT is the key
1175 # * to this routine. For more information, see window(7) in
1176 # * the PC 7300 documentation.
1177 # ***************************************************************/
1178 # #include <string.h> /* needed for strcpy call */
1179 # #include <sys/window.h> /* needed for ioctl call */
1180 # #define FNSIZE 60 /* font name size */
1181 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1183 # * The file /usr/lib/wfont/special.8.ft comes with the
1184 # * standard PC software. It defines a graphics character set
1185 # * similar to that of the Teletype 5425 terminal. To view
1186 # * this or other fonts in /usr/lib/wfont, use the command
1187 # * cfont <filename>. For further information on fonts see
1188 # * cfont(1) in the PC 7300 documentation.
1191 # struct altfdata /* structure for alt font data */
1193 # short altf_slot; /* memory slot number */
1194 # char altf_name[FNSIZE]; /* font name (file name) */
1198 # int wd; /* window in which altfont will be */
1199 # struct altfdata altf;
1201 # strcpy(altf.altf_name,ALTFONT);
1202 # for (wd =1; wd < 12; wd++) {
1203 # ioctl(wd, WIOCLFONT,&altf);
1207 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1208 # they're confirmed by the man page for the System V display---esr)
1210 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1212 cols#80, it#8, lines#24,
1213 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1214 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1215 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1216 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1217 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1218 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1219 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1220 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1221 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1222 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1223 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1224 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1225 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1226 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1227 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1228 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1229 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1230 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1231 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1232 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1233 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1234 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1237 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1238 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1239 # for the application keypad mode. We have added iris-ansi-ap rather than
1240 # change the original to keypad mode.
1242 # (iris-ansi: added rmam/smam based on init string -- esr)
1244 # This entry, and those derived from it, is used in xwsh (also known as
1245 # winterm). Some capabilities that do not fit into the terminfo model
1246 # include the shift- and control-functionkeys:
1248 # F1-F12 generate different codes when shift or control modifiers are used.
1252 # control-F1 \E[025q
1254 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1255 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1257 # The cursor keys also have different codes:
1258 # control-up \E[162q
1259 # control-down \E[165q
1260 # control-left \E[159q
1261 # control-right \E[168q
1264 # shift-down \E[164q
1265 # shift-left \E[158q
1266 # shift-right \E[167q
1268 # control-tab \[072q
1270 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1272 cols#80, it#8, lines#40,
1273 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1274 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1275 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1276 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1277 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1278 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1279 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1280 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1281 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1282 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1283 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1284 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1285 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1286 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1287 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1288 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1289 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1290 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1291 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1293 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1294 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1295 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1297 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1298 # (T.Dickey 98/1/24)
1299 iris-color|xwsh|IRIX ANSI with color,
1301 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1302 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1303 rmul=\E[24m, rs1=\Ec,
1304 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1305 sitm=\E[3m, use=vt100+enq, use=klone+color,
1308 # The following is a version of the ibm-pc entry distributed with PC/IX,
1309 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1310 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1311 # (the former is untrue, and the latter failed under UCB/man); standout and
1312 # underline modes have been added. Note: this entry describes the "native"
1313 # capabilities of the PC monochrome display, without ANY emulation; most
1314 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1318 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1319 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1320 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1323 # (ibmpcx: this entry used to be known as ibmx.
1324 # It formerly included the following extension capabilities:
1325 # :GC=b:GL=v:GR=t:RT=^J:\
1326 # :GH=\E[196g:GV=\E[179g:\
1327 # :GU=\E[193g:GD=\E[194g:\
1328 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1329 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1330 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1331 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1332 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1333 # what was there before. -- esr)
1334 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1337 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1338 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1339 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1340 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1341 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1342 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1348 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1349 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1350 # right corner without triggering a scroll. The ncurses terminfo library can
1351 # handle this case with the <ich1> capability, and prefers <am> for better
1352 # optimization. Bug: The <op> capability resets attributes.
1353 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1354 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1355 qnx|qnx4|qnx console,
1356 daisy, km, mir, msgr, xhpa, xt,
1357 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1358 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1359 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1360 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1361 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1362 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1363 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1364 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1365 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1366 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1367 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1368 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1369 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1370 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1371 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1372 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1373 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1374 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1375 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1376 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1377 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1378 kext=\377\270, kf1=\377\201, kf10=\377\212,
1379 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1380 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1381 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1382 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1383 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1384 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1385 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1386 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1387 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1388 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1389 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1390 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1391 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1392 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1393 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1394 khlp=\377\350, khome=\377\240, khts=\377\342,
1395 kich1=\377\253, kil1=\377\273, kind=\377\261,
1396 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1397 knp=\377\252, knxt=\377\312, kopn=\377\357,
1398 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1399 kprv=\377\302, krdo=\377\336, kref=\377\354,
1400 kres=\377\360, krfr=\377\347, kri=\377\271,
1401 krmir=\377\313, krpl=\377\362, krst=\377\352,
1402 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1403 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1404 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1405 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1406 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1410 qnxt|qnxt4|QNX4 terminal,
1413 qnxm|QNX4 with mouse events,
1415 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1416 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1417 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1418 smicm=\E/>2h, use=qnx4,
1423 # Monochrome QNX4 terminal or console. Setting this terminal type will
1424 # allow an application running on a color console to behave as if it
1425 # were a monochrome terminal. Output will be through stdout instead of
1426 # console writes because the term routines will recognize that the
1427 # terminal name starts with 'qnxt'.
1429 qnxtmono|Monochrome QNX4 terminal or console,
1433 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1434 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1435 # (TD: derive from original qnx4 entry)
1436 qnxt2|qnx 2.15 serial terminal,
1438 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1439 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1441 # QNX ANSI terminal definition
1444 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1445 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
1446 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1447 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1448 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1449 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1450 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1451 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1452 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1453 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1454 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1455 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1456 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1457 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1458 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1459 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1460 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1461 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1462 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1463 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1464 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1465 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1466 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1467 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1468 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1469 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1470 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1471 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1472 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1473 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1474 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1475 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1476 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1477 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1478 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1479 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1480 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1481 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1482 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1483 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1484 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1485 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1486 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1487 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1488 smul=\E[4m, tbc=\E[3g,
1489 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1491 qansi|QNX ansi with console writes,
1492 daisy, xhpa, use=qansi-g,
1494 qansi-t|QNX ansi without console writes,
1497 qansi-m|QNX ansi with mouse,
1499 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1500 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1501 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1502 smicm=\E[>2h, use=qansi,
1504 qansi-w|QNX ansi for windows,
1507 #### NetBSD consoles
1509 # pcvt termcap database entries (corresponding to release 3.31)
1510 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1512 # (For the terminfo master file, I translated these into terminfo syntax.
1513 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1514 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1515 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1517 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1518 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1519 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1520 pcvtXX|pcvt vt200 emulator (DEC VT220),
1521 am, km, mir, msgr, xenl,
1523 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1524 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1525 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1526 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1527 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1528 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1529 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1530 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1531 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1532 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1533 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1534 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1535 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1536 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1537 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1538 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1539 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1540 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1541 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1542 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1544 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1545 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1546 # 50 lines entries; 80 columns
1547 pcvt25|dec vt220 emulation with 25 lines,
1549 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1550 pcvt28|dec vt220 emulation with 28 lines,
1552 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1553 pcvt35|dec vt220 emulation with 35 lines,
1555 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1556 pcvt40|dec vt220 emulation with 40 lines,
1558 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1559 pcvt43|dec vt220 emulation with 43 lines,
1561 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1562 pcvt50|dec vt220 emulation with 50 lines,
1564 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1566 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1567 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1568 # 50 lines entries; 132 columns
1569 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1571 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1572 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1574 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1575 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1577 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1578 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1580 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1581 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1583 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1584 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1586 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1588 # OpenBSD implements a color variation
1589 pcvt25-color|dec vt220 emulation with 25 lines and color,
1591 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1592 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1593 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1594 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1595 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1598 # Terminfo entries to enable the use of the ncurses library in colour on a
1599 # NetBSD-arm32 console (only tested on a RiscPC).
1600 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1601 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1602 # typo in invis - TD
1603 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1604 am, bce, msgr, xenl, xon,
1605 cols#80, it#8, lines#30,
1606 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1607 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1608 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1609 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1610 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1611 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1612 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1613 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1614 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1615 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1616 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1617 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1618 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1619 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1620 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1622 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1623 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1624 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1627 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1628 cols#132, lines#50, use=arm100,
1630 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1631 # manufactured by Sharp for the Japenese market.
1632 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1633 x68k|x68k-ite|NetBSD/x68k ITE,
1635 kclr=\E[9~, khlp=\E[28~, use=vt220,
1638 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1640 # (still unfinished, but good enough so far.)
1641 ofcons|DNARD OpenFirmware console,
1644 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1645 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1646 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1647 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1648 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1649 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1650 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1651 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1652 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1653 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1654 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1655 rmso=\2330m, rmul=\2330m,
1656 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1659 # NetBSD "wscons" emulator in vt220 mode.
1660 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1661 # The emulator renders underlined text in red. Colors are otherwise usable.
1663 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1664 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1665 # vt220 screens in vttest do not work with this emulator. For instance, it
1666 # identifies itself (primary DA response) as a vt220 with selective erase. But
1667 # the selective erase feature does not work. The secondary response is copied
1668 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1669 # the level of detail in a termcap, it is a passable emulator, since ECH does
1670 # work. Don't use it on a VMS system -TD
1671 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1673 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1674 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1675 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1676 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1677 kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
1678 setaf=\E[3%p1%dm, use=vt220,
1680 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1683 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1685 rcons|BSD rasterconsole,
1687 # Color version of above. Color currently only provided by NetBSD.
1688 rcons-color|BSD rasterconsole with ANSI color,
1691 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1693 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1694 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1695 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1696 # -- compare with cons25w
1698 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1699 colors#8, cols#80, it#8, lines#18, pairs#64,
1700 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1701 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1702 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1703 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1704 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1705 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1706 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1707 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1708 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1709 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1710 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1711 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1712 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1713 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1714 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1715 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1717 #### FreeBSD console entries
1719 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1720 # Andrey Chernov maintains the FreeBSD termcap distributions.
1722 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1723 # or comment out the :cb: capability in the console entry.
1725 # Alexander Lukyanov reports:
1726 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1727 # Now el1 clears not only to the line beginning, but also a large chunk
1728 # of previous line. But there is another bug - ech does not work at all.
1732 # common entry without semigraphics
1733 # Bug: The <op> capability resets attributes.
1734 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1735 # instance el1 does if the cursor is moved to the right margin first. Removed
1736 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1738 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1739 # Note that this disables standout with color.
1741 # The emulator sends difference strings based on shift- and control-keys,
1743 # F13-F24 are shifted F1-F12
1744 # F25-F36 are control F1-F12
1745 # F37-F48 are shift+control F1-F12
1746 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1747 am, bce, bw, eo, msgr, npc,
1748 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1749 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1750 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1751 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1752 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1753 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1754 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1755 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1756 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1757 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1758 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1759 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1760 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1761 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1762 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1763 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1764 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1765 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1766 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1767 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1768 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1769 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1770 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1771 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1772 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1773 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1774 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1775 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1777 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1779 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1780 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1781 smul=\E[4m, use=cons25,
1782 cons30|ansi80x30|freebsd console (30-line ansi mode),
1783 lines#30, use=cons25,
1784 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1785 lines#30, use=cons25-m,
1786 cons43|ansi80x43|freebsd console (43-line ansi mode),
1787 lines#43, use=cons25,
1788 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1789 lines#43, use=cons25-m,
1790 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1791 lines#50, use=cons25,
1792 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1793 lines#50, use=cons25-m,
1794 cons60|ansi80x60|freebsd console (60-line ansi mode),
1795 lines#60, use=cons25,
1796 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1797 lines#60, use=cons25-m,
1798 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1799 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1801 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1803 op@, rmul=\E[m, setab@, setaf@,
1804 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1805 smul=\E[4m, use=cons25r,
1806 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1807 lines#50, use=cons25r,
1808 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1809 lines#50, use=cons25r-m,
1810 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1811 lines#60, use=cons25r,
1812 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1813 lines#60, use=cons25r-m,
1814 # ISO 8859-1 FreeBSD console
1815 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1816 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1818 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1820 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1821 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1822 smul=\E[4m, use=cons25l1,
1823 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1824 lines#50, use=cons25l1,
1825 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1826 lines#50, use=cons25l1-m,
1827 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1828 lines#60, use=cons25l1,
1829 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1830 lines#60, use=cons25l1-m,
1832 #### 386BSD and BSD/OS Consoles
1835 # This was the original 386BSD console entry (I think).
1836 # Some places it's named oldpc3|oldibmpc3.
1837 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1838 origpc3|origibmpc3|IBM PC 386BSD Console,
1839 OTbs, am, bw, eo, xon,
1841 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1842 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1843 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1844 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1845 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1846 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1847 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1849 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1850 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1853 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1854 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1855 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1856 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1858 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1859 # Note, the emulator supports many of the additional console features
1860 # listed in the iBCS2 (e.g. character-set selection) though not all
1861 # are described here. This entry really ought to be upgraded.
1862 # Also note, the console will also work with fewer lines after doing
1863 # "stty rows NN", e.g. to use 24 lines.
1864 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1865 # Bug: The <op> capability resets attributes.
1866 bsdos-pc|IBM PC BSD/OS Console,
1867 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1868 use=bsdos-pc-nobold,
1870 bsdos-pc-nobold|BSD/OS PC console w/o bold,
1871 use=klone+color, use=bsdos-pc-m,
1873 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
1874 OTbs, am, eo, km, xon,
1875 cols#80, it#8, lines#25,
1876 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1877 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1878 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1879 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1880 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1881 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1882 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1883 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1886 # Old names for BSD/OS PC console used in releases before 4.1.
1887 pc3|BSD/OS on the PC Console,
1888 use=bsdos-pc-nobold,
1889 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1892 # BSD/OS on the SPARC
1893 bsdos-sparc|Sun SPARC BSD/OS Console,
1896 # BSD/OS on the PowerPC
1897 bsdos-ppc|PowerPC BSD/OS Console,
1901 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1903 # Actually (TD pointed this out at the time the acsc string was added):
1904 # vt52 shouldn't define full acsc since most of the cells don't match.
1905 # see vt100 manual page A-31. This is the list that does match:
1914 # The line-drawing happens to work in several terminal emulators, but should
1915 # not be used as a guide to the capabilities of the vt52. Note in particular
1916 # that vt52 does not support line-drawing characters (the scan-X values refer
1917 # to a crude plotting feature) -TD
1920 cols#80, it#8, lines#24,
1921 acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
1922 cub1=\ED, cud1=\EB, cuf1=\EC,
1923 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1924 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1925 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1927 #### DEC VT100 and compatibles
1929 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1930 # and micro consoles can be found in the `obsolete' section. More details on
1931 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1932 # found near the end of this file.
1934 # Except where noted, these entries are DEC's official terminfos.
1935 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1936 # Engineering for more information. Updated terminfos and termcaps
1937 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1939 # In October 1995 DEC sold its terminals business, including the VT and Dorio
1940 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1941 # its name to Boundless Technologies; see http://www.boundless.com.
1944 # NOTE: Any VT100 emulation, whether in hardware or software, almost
1945 # certainly includes what DEC called the `Level 1 editing extension' codes;
1946 # only the very oldest VT100s lacked these and there probably aren't any of
1947 # those left alive. To capture these, use one of the VT102 entries.
1949 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1950 # since the cursor is left in a different position while in the
1951 # weird state (concept at beginning of next line, vt100 at end
1952 # of this line) so all versions of vi before 3.7 don't handle
1953 # <xenl> right on vt100. The correct way to handle <xenl> is when
1954 # you output the char in column 80, immediately output CR LF
1955 # and then assume you are in column 1 of the next line. If <xenl>
1956 # is on, am should be on too.
1958 # I assume you have smooth scroll off or are at a slow enough baud
1959 # rate that it doesn't matter (1200? or less). Also this assumes
1960 # that you set auto-nl to "on", if you set it off use vt100-nam
1963 # The padding requirements listed here are guesses. It is strongly
1964 # recommended that xon/xoff be enabled, as this is assumed here.
1966 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1967 # tab settings are in non-volatile memory and don't need to be
1968 # reset upon login. Also setting the number of columns glitches
1969 # the screen annoyingly. You can type "reset" to get them set.
1971 # The VT100 series terminals have cursor ("arrows") keys which can operate
1972 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1973 # is the reset state, and is assumed to be the normal state. Application
1974 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1975 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1976 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1977 # was provided primarily as an aid to the porting of VT52 applications. It is
1978 # assumed that the cursor keys are normally in Cursor Mode, and expected that
1979 # applications such as vi will always transmit the <smkx> string. Therefore,
1980 # the definitions for the cursor keys are made to match what the terminal
1981 # transmits after the <smkx> string is transmitted. If the <smkx> string
1982 # is a null string or is not defined, then cursor keys are assumed to be in
1983 # "Cursor Mode", and the cursor keys definitions should match that assumption,
1984 # else the application may fail. It is also expected that applications will
1985 # always transmit the <rmkx> string to the terminal before they exit.
1987 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1988 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1989 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1990 # Application Mode. Numeric Mode is the reset state, and is assumed to be
1991 # the normal state. Application Mode is the "set" state. In Numeric Mode,
1992 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1993 # Enter key transmits the same as the Return key (Note: the Return key
1994 # can be configured to send either LF (\015) or CR LF). In Application Mode,
1995 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1996 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1997 # is normally in Numeric Mode. If an application requires that the keypad be
1998 # in Application Mode then it is expected that the user, or the application,
1999 # will set the TERM environment variable to point to a terminfo entry which has
2000 # defined the <smkx> string to include the codes that switch the keypad into
2001 # Application Mode, and the terminfo entry will also define function key
2002 # fields to match the Application Mode control codes. If the <smkx> string
2003 # is a null string or is not defined, then the keypad is assumed to be in
2004 # Numeric Mode. If the <smkx> string switches the keypad into Application
2005 # Mode, it is expected that the <rmkx> string will contain the control codes
2006 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2007 # applications which transmit the <smkx> string will also always transmit the
2008 # <rmkx> string to the terminal before they exit.
2010 # Here's a diagram of the VT100 keypad keys with their bindings.
2011 # The top line is the name of the key (some DEC keyboards have the keys
2012 # labelled somewhat differently, like GOLD instead of PF1, but this is
2013 # the most "official" name). The second line is the escape sequence it
2014 # generates in Application Keypad mode (where "$" means the ESC
2015 # character). The third line contains two items, first the mapping of
2016 # the key in terminfo, and then in termcap.
2017 # _______________________________________
2018 # | PF1 | PF2 | PF3 | PF4 |
2019 # | $OP | $OQ | $OR | $OS |
2020 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2022 # | $Ow | $Ox | $Oy | $Om |
2023 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2025 # | $Ot | $Ou | $Ov | $Ol |
2026 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2028 # | $Oq | $Or | $Os | enter |
2029 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2032 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2034 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2035 # terminfo guidelines. That is a compromise used to assign the remaining
2036 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2038 vt100+keypad|dec vt100 numeric keypad no fkeys,
2039 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2040 vt100+pfkeys|dec vt100 numeric keypad,
2041 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2043 vt100+fnkeys|dec vt100 numeric keypad,
2044 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2045 kf9=\EOw, use=vt100+pfkeys,
2047 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2048 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2049 # use the 5-key arrangement to model the arrow keys as suggested in the
2050 # terminfo guidelines:
2051 # _______________________________________
2052 # | PF1 | PF2 | PF3 | PF4 |
2053 # | $OP | $OQ | $OR | $OS |
2054 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2056 # | $Ow | $Ox | $Oy | $Om |
2057 # |_ka1__K1_|_________|_ka3__K3_|_________|
2059 # | $Ot | $Ou | $Ov | $Ol |
2060 # |_________|_kb2__K2_|_________|_________|
2062 # | $Oq | $Or | $Os | enter |
2063 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2066 # |___________________|_________|_kent_@8_|
2068 vt220+keypad|dec vt220 numeric keypad,
2069 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2070 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2073 vt100+enq|ncurses extension for vt100-style ENQ,
2074 u8=\E[?1;2c, use=ansi+enq,
2075 vt102+enq|ncurses extension for vt102-style ENQ,
2076 u8=\E[?6c, use=ansi+enq,
2078 # And here, for those of you with orphaned VT100s lacking documentation, is
2079 # a description of the soft switches invoked when you do `Set Up'.
2081 # Scroll 0-Jump Shifted 3 0-#
2082 # | 1-Smooth | 1-British pound sign
2083 # | Autorepeat 0-Off | Wrap Around 0-Off
2085 # | | Screen 0-Dark Bkg | | New Line 0-Off
2086 # | | | 1-Light Bkg | | | 1-On
2087 # | | | Cursor 0-Underline | | | Interlace 0-Off
2088 # | | | | 1-Block | | | | 1-On
2090 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2092 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2093 # | | | 1-On | | | 1-50 Hz
2094 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2095 # | | 1-ANSI | | 1-8 Bits
2096 # | Keyclick 0-Off | Parity 0-Off
2098 # Margin Bell 0-Off Parity Sense 0-Odd
2101 # The following SET-UP modes are assumed for normal operation:
2102 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2103 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2104 # Other SET-UP modes may be set for operator convenience or communication
2105 # requirements; I recommend
2106 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2107 # Unless you have a graphics add-on such as Digital Engineering's VT640
2108 # (and even then, whenever it can be arranged!) you should set
2111 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2112 vt100|vt100-am|dec vt100 (w/advanced video),
2113 OTbs, am, mc5i, msgr, xenl, xon,
2114 cols#80, it#8, lines#24, vt#3,
2115 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2116 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2117 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2118 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2119 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2120 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2121 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2122 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2123 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2124 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2125 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2126 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2127 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2128 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2129 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2130 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2132 vt100nam|vt100-nam|vt100 no automargins,
2133 am@, xenl@, use=vt100-am,
2134 vt100-vb|dec vt100 (w/advanced video) & no beep,
2135 bel@, flash=\E[?5h\E[?5l, use=vt100,
2137 # Ordinary vt100 in 132 column ("wide") mode.
2138 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2140 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2141 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2142 cols#132, lines#14, vt@,
2143 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2145 # vt100 with no advanced video.
2146 vt100-nav|vt100 without advanced video option,
2148 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2150 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2151 cols#132, lines#14, use=vt100-nav,
2153 # vt100 with one of the 24 lines used as a status line.
2154 # We put the status line on the top.
2155 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2158 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2159 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2160 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2161 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2163 # Status line at bottom.
2164 # Clearing the screen will clobber status line.
2165 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2168 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2169 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2171 # Most of the `vt100' emulators out there actually emulate a vt102
2172 # This entry (or vt102-nsgr) is probably the right thing to use for
2175 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2177 vt102-w|dec vt102 in wide mode,
2179 rs3=\E[?3h, use=vt102,
2181 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2182 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2183 # string in the canonical vt100 entry above leaves the screen littered
2184 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2185 # after highlight turnoffs. This entry should fix that, and even leave
2186 # ACS support working, at the cost of making multiple-highlight changes
2187 # slightly more expensive.
2188 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2189 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2190 sgr@, sgr0=\E[m, use=vt102,
2192 # VT125 Graphics CRT. Clear screen also erases graphics
2193 # Some vt125's came configured with vt102 support.
2194 vt125|vt125 graphics terminal,
2196 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2198 # This isn't a DEC entry, it came from University of Wisconsin.
2199 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2202 cols#80, it#8, lines#24, vt#3,
2203 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2204 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2205 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2206 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2207 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2208 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2209 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2210 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2211 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2213 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2214 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2215 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2217 # vt132 - like vt100 but slower and has ins/del line and such.
2218 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2219 # manual and from the ANSI standard, this describes the actual
2220 # terminal. I've never actually used a vt132 myself, so this
2225 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2226 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2228 # This vt220 description maps F5--F9 to the second block of function keys
2229 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2230 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2231 # PF1--PF4 are used as F1--F4.
2233 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2234 OTbs, OTpt, am, mir, xenl, xon,
2235 cols#80, lines#24, vt#3,
2237 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2238 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2239 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2240 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2241 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2242 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2243 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2244 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2245 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2246 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2247 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2248 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2249 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2250 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2251 rmso=\E[27m, rmul=\E[24m,
2252 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2253 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2254 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2255 smso=\E[7m, smul=\E[4m,
2257 # A much better description of the VT200/220; used to be vt220-8
2258 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2259 # designation to accommodate bug in pcvt -TD
2260 vt220|vt200|dec vt220,
2261 OTbs, am, mc5i, mir, msgr, xenl, xon,
2262 cols#80, it#8, lines#24, vt#3,
2263 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2264 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2265 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2266 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2267 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2268 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2269 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2270 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2271 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2272 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2273 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2274 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2275 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2276 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2277 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2278 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2279 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2280 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2281 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2282 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2283 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2284 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2285 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2286 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2287 vt220-w|vt200-w|DEC vt220 in wide mode,
2289 rs3=\E[?3h, use=vt220,
2290 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2291 OTbs, am, mc5i, mir, msgr, xenl, xon,
2292 cols#80, it#8, lines#24, vt#3,
2293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2294 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2295 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2296 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2297 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2298 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2299 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2300 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2301 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2302 il=\233%p1%dL, il1=\233L, ind=\ED,
2303 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2304 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2305 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2306 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2307 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2308 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2309 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2310 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2311 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2312 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2313 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2314 rs1=\233?3l, sc=\E7,
2315 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2316 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2317 smso=\2337m, smul=\2334m, tbc=\2333g,
2320 # This vt220 description regards F6--F10 as the second block of function keys
2321 # at the top of the keyboard. This mapping follows the description given
2322 # in the VT220 Programmer Reference Manual and agrees with the labeling
2323 # on some terminals that emulate the vt220. There is no support for an F5.
2324 # See vt220 for an alternate mapping.
2326 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2327 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2328 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2329 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2330 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2332 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2334 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2336 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2337 # (not an official DEC entry!)
2338 # The problem with real vt220 terminals is they don't send escapes when in
2339 # in vt220 mode. This can be gotten around two ways. 1> don't send
2340 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2341 # features of vt100 advanced video which it then has.
2343 # This entry takes the view of putting a vt220 into vt100 mode so
2344 # you can use the escape key in emacs and everything else which needs it.
2346 # You probably don't want to use this on a VMS machine since VMS will think
2347 # it has a vt220 and will get fouled up coming out of emacs
2349 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2350 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2351 vt200-js|vt220-js|dec vt200 series with jump scroll,
2354 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2355 cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2356 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2358 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2359 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2360 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2361 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2362 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2363 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2364 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2366 # This was DEC's vt320. Use the purpose-built one below instead
2367 #vt320|DEC VT320 in vt100 emulation mode,
2370 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2372 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2374 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2376 # These entries are not DEC's official ones, they were purpose-built for the
2377 # VT320. Here are the designer's notes:
2378 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2379 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2380 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2381 # Things that use <knxt> usually use tab anyways... and things that don't use
2382 # tab usually use <knxt> instead...
2383 # kprv is same as tab - Backtab is useless...
2384 # I left out <sgr> because of its RIDICULOUS complexity,
2385 # and the resulting fact that it causes the termcap translation of the entry
2386 # to SMASH the 1k-barrier...
2387 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2388 # (vt320: uncommented <fsl> --esr)
2389 vt320|vt300|dec vt320 7 bit terminal,
2390 am, eslok, hs, mir, msgr, xenl,
2391 cols#80, lines#24, wsl#80,
2392 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2393 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2394 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2395 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2396 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2397 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2398 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2399 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2400 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2402 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2403 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2404 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2405 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2406 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2407 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2408 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2409 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2410 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2411 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2412 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2414 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2416 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2417 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2418 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2419 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2420 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2422 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2423 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2425 # We have to init 132-col mode, not 80-col mode.
2426 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2428 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2429 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2431 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2433 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2434 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2437 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2438 # which are pretty much a superset of the VT320. They have the
2439 # host writable status line, yet another different DRCS matrix size,
2440 # and such, but they add the DEC Technical character set, Multiple text
2441 # pages, selectable length pages, and the like. The difference between
2442 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2443 # monitor, the former has 4 planes and a color monitor. These terminals
2444 # support VT131 and ANSI block mode, but as with much of these things,
2445 # termcap/terminfo doesn't deal with these features.
2447 # Note that this entry is are set up in what was the standard way for GNU
2448 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2449 # keys were switched into application mode at the same time the numeric pad
2450 # is switched into application mode. This changes the definitions of the
2451 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2452 # your termcap or terminfo entry,
2454 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2455 # (vt340: string capability "sb=\E[M" corrected to "sr";
2456 # also, added <rmam>/<smam> based on the init string -- esr)
2457 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2458 am, eslok, hs, mir, msgr, xenl, xon,
2459 cols#80, it#8, lines#24, vt#3,
2460 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2461 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2462 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2463 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2464 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2465 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2466 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2467 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2468 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2470 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2471 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2472 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2473 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2474 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2475 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2476 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2477 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2478 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2479 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2480 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2481 tsl=\E[2$~\E[1$}\E[1;%dH,
2483 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2484 # (originally written with vt420 as its primary name, and usable for it).
2486 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2487 # text pages and long text pages with selectable length of the vt340, along
2488 # with left and right margins, rectangular area text copy, fill, and erase
2489 # operations, selected region character attribute change operations,
2490 # page memory and rectangle checksums, insert/delete column, reception
2491 # macros, and other features too numerous to remember right now. TERMCAP
2492 # can only take advantage of a few of these added features.
2494 # Note that this entry is are set up in what was the standard way for GNU
2495 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2496 # keys were switched into application mode at the same time the numeric pad
2497 # is switched into application mode. This changes the definitions of the
2498 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2499 # your termcap entry,
2501 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2502 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2503 # also, added <rmam>/<smam> based on the init string -- esr)
2504 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2505 am, eslok, hs, mir, msgr, xenl, xon,
2506 cols#80, it#8, lines#24, vt#3,
2507 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2508 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2509 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2510 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2511 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2512 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2513 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2514 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2515 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2516 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2517 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2518 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2519 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2520 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2521 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2522 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2523 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2524 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2525 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2526 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2527 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2528 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2529 tsl=\E[2$~\E[1$}\E[1;%dH,
2531 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2532 # a missing <sc> -- esr)
2535 cols#80, lines#24, vt#3,
2536 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2537 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2538 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2539 cub1=^H, cud1=\E[B, cuf1=\E[C,
2540 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2541 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2542 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2543 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2544 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2545 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2546 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2547 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2548 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2549 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2550 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2551 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2552 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2553 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2554 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2555 smkx=\E=, smso=\E[7m, smul=\E[4m,
2557 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2558 # takes two parameters, the key and the string. Translating the key is
2559 # straightforward (keys 1-5 are not defined on real terminals, though some
2560 # emulators define these):
2562 # if (key < 16) then value = key;
2563 # else if (key < 21) then value = key + 1;
2564 # else if (key < 25) then value = key + 2;
2565 # else if (key < 27) then value = key + 3;
2566 # else if (key < 30) then value = key + 4;
2567 # else value = key + 5;
2569 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2570 # There's no provision in terminfo for emitting a string in this format, so the
2571 # application has to know it.
2573 vt420pc|DEC VT420 w/PC keyboard,
2574 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2575 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2576 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2577 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2578 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2579 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2580 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2581 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2582 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2583 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2584 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2585 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2586 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2587 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2588 pctrm=USR_TERM\:vt420pcdos\:,
2589 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2592 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2594 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2596 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2597 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2599 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2600 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2601 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2602 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2603 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2604 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2605 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2610 vt510pc|DEC VT510 w/PC keyboard,
2612 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2617 # The VT520 is a monochrome text terminal capable of managing up to
2618 # four independent sessions in the terminal. It has multiple ANSI
2619 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2620 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2621 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2623 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2624 # [Alt]/[Print Screen] depending upon which keyboard and which
2625 # terminal mode is being used. If Set-Up has been disabled or
2626 # assigned to an unknown key, Set-Up may be entered by pressing
2627 # [F3] as the first key after power up, regardless of keyboard type.
2628 # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2631 cols#80, lines#24, vt#3,
2632 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2633 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2634 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2635 cub1=^H, cud1=\E[B, cuf1=\E[C,
2636 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2637 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2638 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2639 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2640 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2641 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2642 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2643 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2645 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2646 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2647 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2648 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2649 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2650 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2651 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2652 smso=\E[7m, smul=\E[4m,
2654 # (vt525: I added <rmam>/<smam> based on the init string;
2655 # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2658 cols#80, lines#24, vt#3,
2659 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2660 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2661 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2662 cub1=^H, cud1=\E[B, cuf1=\E[C,
2663 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2664 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2665 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2666 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2667 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2668 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2669 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2670 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2672 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2673 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2674 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2675 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2676 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2677 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2678 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2679 smso=\E[7m, smul=\E[4m,
2681 #### VT100 emulations
2684 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2685 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2686 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2687 # that this works best with a stock vt100 entry.
2688 dec-vt100|EWAN telnet's vt100 emulation,
2691 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2692 dec-vt220|DOS tnvt200 terminal emulator,
2695 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2696 # anyone who needs PC VT340 emulation. (or anything below that level, for
2697 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2698 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2699 # I can send the address if requested.
2700 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2701 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2702 z340|zstem vt340 terminal emulator 132col 42line,
2704 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2705 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2707 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2709 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2710 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2713 # CRT is shareware. It implements some xterm features, including mouse.
2714 crt|crt-vt220|CRT 2.3 emulating VT220,
2717 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2719 # PuTTY 0.55 (released 3 August 2004)
2720 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2722 # Comparing with 0.51, vttest is much better (only a few problems with the
2723 # cursor position reports and wrapping).
2725 # PuTTY 0.51 (released 14 December 2000)
2727 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2728 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2729 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2730 # to xterm, which is incorrect, since several features are misimplemented:
2732 # Alt+key always sends ESC+key, so 'km' capability is removed.
2734 # Control responses, wrapping and tabs are buggy, failing a couple of
2735 # screens in vttest.
2737 # xterm mouse support is not implemented (unrelease version may).
2739 # Several features such as backspace/delete are optional; this entry documents
2740 # the default behavior -TD
2742 putty|PuTTY terminal emulator,
2743 am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
2744 colors#8, it#8, ncv#22, pairs#64,
2745 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2746 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2747 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2748 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2749 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2750 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2751 dch=\E[%p1%dP, dch1=\E[P,
2752 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2753 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2754 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2755 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2756 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2758 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2759 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2760 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2761 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2762 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2763 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2764 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2765 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2766 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2767 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2768 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2769 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2770 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2771 rmso=\E[27m, rmul=\E[24m,
2772 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2773 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2774 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2775 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2776 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2777 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2778 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2779 vt100-putty|Reset PuTTY to pure vt100,
2780 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2782 # palette is hardcoded...
2783 putty-256color|PuTTY 0.58 with xterm 256-colors,
2784 initc@, use=xterm+256color, use=putty,
2786 # One of the keyboard selections is "VT100+".
2787 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2788 putty-vt100|VT100+ keyboard layout,
2789 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2790 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2791 kf9=\EOX, use=putty,
2793 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2794 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2795 # (communication program) which supports:
2797 # - Serial port connections.
2798 # - TCP/IP (telnet) connections.
2799 # - VT100 emulation, and selected VT200/300 emulation.
2800 # - TEK4010 emulation.
2801 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2803 # - Scripts using the "Tera Term Language".
2804 # - Japanese and Russian character sets.
2806 # The program does not come with terminfo or termcap entries. However, the
2807 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2808 # vt52 or doublesize character support; blinking is done with color). Besides
2809 # the HPA, VPA extensions it also implements CPL and CNL.
2811 # All of the function keys can be remapped. This description shows the default
2812 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2813 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2814 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2822 # ANSI colors are implemented, but cannot be combined with video attributes
2823 # except for reverse.
2825 # No fonts are supplied with the program, so the acsc string is chosen to
2826 # correspond with the default Microsoft terminal font.
2828 # Tera Term recognizes some xterm sequences, including those for setting and
2829 # retrieving the window title, and for setting the window size (i.e., using
2830 # "resize -s"), though it does not pass SIGWINCH to the application if the
2831 # user resizes the window with the mouse.
2832 teraterm2.3|Tera Term Pro,
2835 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2836 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2837 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2838 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2839 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2840 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2841 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2842 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2843 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2844 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2845 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2846 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2847 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2848 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
2849 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
2850 use=klone+color, use=vt100,
2852 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
2853 # to choose a Windows OEM font).
2855 # Testing with tack:
2856 # - it does not have xenl (suppress that)
2857 # - underline seems to work with color (modify ncv).
2858 # Testing with vttest:
2859 # - wrapping differs from vt100 (menu 1).
2860 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
2862 # - it recognizes the dtterm window controls for reporting size in
2863 # characters and pixels.
2864 # - it passes SIGWINCH.
2865 teraterm4.59|Tera Term Pro,
2868 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2869 kmous=\E[M, use=teraterm2.3,
2874 # Tested with WinNT 4.0, the telnet application assumes the screensize is
2875 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2878 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
2879 # for casual (occasional) use. Also fails several of the vttest screens,
2880 # but that is not unusual for vt100 "emulators".
2881 # b) Does not implement vt100 keypad
2882 # c) Recognizes a subset of vt52 controls.
2883 ms-vt100|MS telnet imitating dec vt100,
2885 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2886 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
2887 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
2889 # Tested with Windows 2000, the telnet application runs in a console window,
2890 # also using 'Terminal' font.
2893 # a) This version has no function keys or numeric keypad. Unlike the older
2894 # version, the numeric keypad is entirely ignored.
2895 # b) The program sets $TERM to "ansi", which of course is inaccurate.
2896 ms-vt100-color|vtnt|windows 2000 ansi (sic),
2898 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
2901 # Based on comments from Federico Bianchi:
2903 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
2904 # scheme for PF keys.
2906 # and PuTTY wishlist:
2908 # The modifiers are represented as the codes listed above, prefixed to
2909 # the normal sequences. If the modifier is pressed alone, its sequence
2910 # is transmitted twice in succession. If multiple modifiers apply,
2911 # they're transmitted in the order shift, control, alt.
2916 ms-vt100+|vt100+|windows XP vt100+ (sic),
2917 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
2918 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
2919 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
2920 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
2921 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
2922 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
2923 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
2924 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
2925 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
2926 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
2927 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
2928 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
2929 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
2930 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
2931 knp=\E/, kpp=\E?, use=ms-vt100-color,
2933 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
2936 # a minimal subset of a vt100 (compare with "news-unk).
2937 tt|tkterm|Don Libes' tk text widget terminal emulator,
2938 clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
2939 cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2940 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
2943 #### X terminal emulators
2945 # You can add the following line to your .Xdefaults to change the terminal type
2946 # set by the xterms you start up to my-xterm:
2948 # *termName: my-xterm
2950 # System administrators can change the default entry for xterm instances
2951 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2952 # case, xterm will detect and reject an invalid terminal type, falling back
2953 # to the default of xterm.
2956 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2957 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2958 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2959 # as these seem not to work -- esr)
2960 x10term|vs100-x10|xterm terminal emulator (X10 window system),
2961 OTbs, am, km, mir, msgr, xenl, xon,
2962 cols#80, it#8, lines#65,
2963 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2964 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2965 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2966 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2967 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2968 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2969 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2970 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2971 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2972 smso=\E[7m, smul=\E[4m,
2973 # Compatible with the R5 xterm
2974 # (from the XFree86 3.2 distribution, <blink=@> removed)
2975 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2976 # corrected typos in rs2 string - TD
2978 xterm-r5|xterm R5 version,
2979 OTbs, am, km, msgr, xenl,
2980 cols#80, it#8, lines#24,
2981 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2982 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2983 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2984 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2985 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2986 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2987 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2988 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2989 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2990 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2991 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2992 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2993 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2994 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2996 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2998 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
2999 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3000 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3001 # Compatible with the R6 xterm
3002 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3003 # added khome/kend, hts based on the R6 xterm code - TD
3004 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3005 # for compatibility with other emulators).
3006 xterm-r6|xterm-old|xterm X11R6 version,
3007 OTbs, am, km, mir, msgr, xenl,
3008 cols#80, it#8, lines#24,
3009 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3010 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3011 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3012 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3013 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3014 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3015 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3017 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3018 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3019 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3020 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3021 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3022 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3023 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3024 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3025 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3026 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3027 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3028 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3029 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3030 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3032 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3033 # The name has been changed and some aliases have been removed.
3034 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3035 OTbs, am, bce, km, mir, msgr, xenl,
3036 cols#80, it#8, lines#24, ncv@,
3037 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3038 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3039 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3040 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3041 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3042 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3043 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3044 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3045 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3046 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3048 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3049 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3050 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3051 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3052 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3053 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3054 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3055 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3056 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3057 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3058 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3059 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3060 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3061 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3062 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3063 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3064 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3065 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3066 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3067 use=ecma+color, use=vt220+keypad,
3069 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3070 # codes for F1-F4 except while in VT220 mode.
3071 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3072 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3074 # This version was released in XFree86 3.3.3 (November 1998).
3075 # Besides providing printer support, it exploits a new feature that allows
3076 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3077 # -- the distribution contained incorrect khome/kend values -TD
3078 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3080 blink=\E[5m, ich1@, invis=\E[8m,
3081 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3082 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
3083 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
3084 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3085 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
3087 # This version was released in XFree86 4.0.
3088 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3090 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3091 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3092 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3093 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3094 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3095 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3096 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3097 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3098 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3099 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3100 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3101 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3102 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3103 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3104 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3105 smcup=\E[?1049h, use=xterm-xf86-v333,
3107 # This version was released in XFree86 4.3.
3108 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3109 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3110 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3112 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3115 # This version was released in XFree86 4.4.
3116 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3117 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3118 rin=\E[%p1%dT, use=xterm-xf86-v43,
3120 xterm-xfree86|xterm terminal emulator (XFree86),
3123 # This version reflects the current xterm features.
3124 xterm-new|modern xterm terminal emulator,
3126 indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
3127 kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
3128 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3129 kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
3130 knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
3133 # This fragment describes as much of XFree86 xterm's "pc-style" function
3134 # keys as will fit into terminfo's 60 function keys.
3137 # ---------------------------------
3144 # 8 Shift + Alt + Control
3145 # ---------------------------------
3146 # The meta key may also be used as a modifier in this scheme, adding another
3147 # bit to the parameter.
3148 xterm+pcfkeys|fragment for PC-style fkeys,
3149 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3152 xterm+noapp|fragment with cursor keys in normal mode,
3153 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3156 xterm+app|fragment with cursor keys in application mode,
3157 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3160 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3161 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3162 # the earlier scheme, as noted in the "use=" clauses in this file.
3164 # The original assignments from patch #94 for cursor-keys had some technical
3167 # A parameter for a function-key to represent a modifier is just more
3168 # bits. But for a cursor-key it may change the behavior of the
3169 # application. For instance, emacs decodes the first parameter of a
3170 # cursor-key as a repeat count.
3172 # A parameterized string should (really) not begin with SS3 (\EO).
3173 # Rather, CSI (\E[) should be used.
3175 # For these reasons, the original assignments were deprecated. For
3176 # compatibility reasons, they are still available as a setting of xterm's
3177 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3178 # that might apply to xterm+pcfkeys with different values of that resource.
3179 xterm+pcc3|fragment with modifyCursorKeys:3,
3180 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3181 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3182 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3183 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3184 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3185 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3186 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3187 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3190 xterm+pcc2|fragment with modifyCursorKeys:2,
3191 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3192 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3193 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3194 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3195 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3196 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3197 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3199 xterm+pcc1|fragment with modifyCursorKeys:1,
3200 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3201 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3202 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3203 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3204 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3205 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3207 xterm+pcc0|fragment with modifyCursorKeys:0,
3208 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3209 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3210 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3211 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3212 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3213 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3216 # Here are corresponding fragments from xterm patch #216:
3218 xterm+pcf0|fragment with modifyFunctionKeys:0,
3219 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3220 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3221 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3222 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3223 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3224 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3225 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3226 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3227 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3228 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3229 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3230 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3231 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3232 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3233 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3234 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3235 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3237 xterm+pcf2|fragment with modifyFunctionKeys:2,
3238 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3239 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3240 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3241 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3242 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3243 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3244 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3245 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3246 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3247 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3248 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3249 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3250 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3251 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3252 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3253 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3254 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3255 kf8=\E[19~, kf9=\E[20~,
3257 # Chunks from xterm #230:
3258 xterm+pce2|fragment with modifyCursorKeys:2,
3259 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3260 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3261 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3262 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3263 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3264 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3265 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3266 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3267 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3268 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3269 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3272 xterm+edit|fragment for 6-key editing-keypad,
3273 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3276 xterm+pc+edit|fragment for pc-style editing keypad,
3277 kend=\E[4~, khome=\E[1~,
3279 xterm+vt+edit|fragment for vt220-style editing keypad,
3280 kfnd=\E[1~, kslt=\E[4~,
3283 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3284 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3285 # is shown here (because that is used in mrxvt and mlterm):
3286 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3287 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3288 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3289 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3290 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3291 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3292 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3293 kf63=\E[13;4~, use=xterm+pcf2,
3295 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3296 xterm-basic|modern xterm terminal emulator - common,
3297 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3298 colors#8, cols#80, it#8, lines#24, pairs#64,
3299 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3300 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3301 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3302 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3303 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3304 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3305 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3306 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3307 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3308 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3309 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
3310 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3311 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3312 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3313 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3314 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3315 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3316 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3317 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3318 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3319 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3320 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3321 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3323 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3324 # In retrospect, something like xterm-r6 was intended here -TD
3325 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3326 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3328 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3329 # If configured to support 88- or 256-colors (which is fairly common in 2009),
3330 # xterm also recognizes the control sequences for initc -TD
3331 xterm-16color|xterm with 16 colors like aixterm,
3333 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3334 use=ibm+16color, use=xterm-new,
3336 # 256-colors is a compile-time feature of XFree86 xterm beginning with
3337 # patch #111 (1999/7/10) -TD
3338 xterm+256color|xterm 256-color feature,
3340 colors#256, pairs#32767,
3341 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3342 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3343 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3346 # 88-colors is a compile-time feature of XFree86 xterm beginning with
3347 # patch #115 (1999/9/18) -TD
3349 # Note that the escape sequences used are the same as for 256-colors - xterm
3350 # has a different table of default color resource values. If built for
3351 # 256-colors, it can still handle an 88-color palette by using the initc
3354 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3355 # which support the xterm+256color feature support the associated initc
3356 # capability. So it is cancelled in the entries which use this and/or the
3357 # xterm+256color block.
3359 # The default color palette for the 256- and 88-colors are different. A
3360 # given executable will have one palette (perhaps compiled-in). If the program
3361 # supports xterm's control sequence, it can be programmed using initc.
3362 xterm+88color|xterm 88-color feature,
3363 colors#88, pairs#7744, use=xterm+256color,
3365 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3366 xterm-256color|xterm with 256 colors,
3367 use=xterm+256color, use=xterm-new,
3368 xterm-88color|xterm with 88 colors,
3369 use=xterm+88color, use=xterm-256color,
3371 # These two are used to demonstrate the any-event mouse support, i.e., by
3372 # using an extended name "XM" which tells ncurses to put the terminal into
3373 # a special mode when initializing the xterm mouse.
3374 xterm-1002|testing xterm-mouse,
3375 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3376 xterm-1003|testing xterm-mouse,
3377 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3379 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3380 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3381 # To use it, your decTerminalID resource must be set to 200 or above.
3388 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3389 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3390 colors#8, cols#80, it#8, lines#24, pairs#64,
3391 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3392 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3393 civis=\233?25l, clear=\233H\2332J,
3394 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3395 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3396 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3397 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3398 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3399 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3400 flash=\233?5h$<100/>\233?5l, home=\233H,
3401 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3402 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3403 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3404 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
3405 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3406 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3407 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3408 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3409 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3410 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3411 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3412 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3413 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3414 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3415 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3416 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3418 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3419 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3420 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3421 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3422 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3423 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3424 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3425 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3426 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3428 xterm-hp|xterm with hpterm function keys,
3429 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3430 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3431 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3432 knp=\ES, kpp=\ET, use=xterm-basic,
3434 xterm-sco|xterm with SCO function keys,
3435 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3436 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3437 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3438 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3439 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3440 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3441 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3442 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3443 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3444 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3445 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3446 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3449 # The xterm-new description has all of the features, but is not completely
3450 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3451 # sunKeyboard resource to true:
3452 # + maps the editing keypad
3453 # + interprets control-function-key as a second array of keys, so a
3454 # 12-fkey keyboard can support vt220's 20-fkeys.
3455 # + maps numeric keypad "+" to ",".
3456 # + uses DEC-style control sequences for the application keypad.
3458 xterm-vt220|xterm emulating vt220,
3459 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3460 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3461 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3462 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3463 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3464 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3465 use=xterm+app, use=xterm+edit, use=xterm-basic,
3468 xterm-vt52|xterm emulating dec vt52,
3469 cols#80, it#8, lines#24,
3470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3471 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3472 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3473 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
3474 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3476 xterm-noapp|xterm with cursor keys in normal mode,
3477 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3480 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3481 lines#24, use=xterm-old,
3483 # This is xterm for ncurses.
3484 xterm|xterm terminal emulator (X Window System),
3487 # These entries allow access to the X titlebar and icon name as a status line.
3488 # Note that twm (and possibly window managers descended from it such as tvtwm,
3489 # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3491 xterm+sl|access X title line and icon name,
3494 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3495 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3498 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3501 # The following xterm variants don't depend on your base version
3503 # xterm with bold instead of underline
3504 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3505 smso=\E[7m, smul=\E[1m, use=xterm-old,
3506 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3507 # (kterm should not invoke DEC Graphics as the alternate character set
3508 # -- Kenji Rikitake)
3509 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3510 # -- MATSUMOTO Shoji)
3511 # kterm implements acsc via built-in table of X Drawable's
3512 kterm|kterm kanji terminal emulator (X window system),
3515 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3516 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3517 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3518 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3519 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3520 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3521 kterm-color|kterm-co|kterm with ANSI colors,
3522 ncv@, use=kterm, use=ecma+color,
3523 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3524 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3525 ich@, ich1@, use=xterm,
3526 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3527 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3528 rmcup@, smcup@, use=xterm,
3530 # This describes the capabilities of color_xterm, an xterm variant from
3531 # before ECMA-64 color support was folded into the main-line xterm release.
3532 # This entry is straight from color_xterm's maintainer.
3533 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3534 # The README's with the distribution also say that it supports SGR 21, 24, 25
3535 # and 27, but they are not present in the terminfo or termcap.
3536 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3537 OTbs, am, km, mir, msgr, xenl,
3538 cols#80, it#8, lines#65, ncv@,
3539 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3540 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3541 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3542 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3543 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3544 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3545 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3546 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3547 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3548 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3549 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3550 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3551 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3552 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3553 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3554 rmso=\E[27m, rmul=\E[24m,
3555 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3557 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3558 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3559 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3560 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3562 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3563 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3564 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3565 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3566 # that each of those implements the home, end, delete keys differently.
3568 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3569 # colors; note that this is not compatible with the 5.2 version.
3570 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3571 # match XFree86's xterm.terminfo usage and prevent circular links
3572 xterm-color|nxterm|generic color xterm,
3574 op=\E[m, use=xterm-r6, use=klone+color,
3576 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3577 gnome-rh62|Gnome terminal,
3579 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3582 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3584 # This implements a subset of vt102 with a random selection of features from
3585 # other terminals such as color and function-keys.
3587 # shift-f1 to shift-f10 are f11 to f20
3589 # NumLock changes the application keypad to approximate vt100 keypad, except
3590 # that there is no escape sequence matching comma (,).
3592 # Other defects observed:
3593 # vt100 LNM mode is not implemented.
3594 # vt100 80/132 column mode is not implemented.
3595 # vt100 DECALN is not implemented.
3596 # vt100 DECSCNM mode is not implemented, so flash does not work.
3597 # vt100 TBC (tab reset) is not implemented.
3598 # xterm alternate screen controls do not restore cursor position properly
3599 # it hangs in tack after running function-keys test.
3600 gnome-rh72|GNOME Terminal,
3602 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3603 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3604 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3605 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3607 # GNOME Terminal 2.0.1 (Redhat 8.0)
3609 # Documentation now claims it implements vt220 (which is demonstrably false).
3610 # However, it does implement ECH, which is a vt220 feature. And there are
3611 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3612 # more of its bugs using vttest.
3614 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3615 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3617 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3618 # operations. Shift-tab generates a distinct sequence so it can be argued
3619 # that it implements kcbt.
3620 gnome-rh80|GNOME Terminal,
3622 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3623 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3625 # GNOME Terminal 2.2.1 (Redhat 9.0)
3627 # bce and msgr are repaired.
3628 gnome-rh90|GNOME Terminal,
3630 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3631 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3632 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3635 # GNOME Terminal 2.14.2 (Fedora Core 5)
3636 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3637 gnome-fc5|GNOME Terminal,
3639 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3640 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3642 # GNOME Terminal 2.18.1 (2007 snapshot)
3644 # For any "recent" version of gnome-terminal, it is futile to attempt to
3645 # support modifiers on cursor- and keypad keys because the program usually
3646 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3647 # of the keys (which more/less correspond to the termcap values), and will
3648 # interpret those according to the $TERM value, but others not in the
3649 # terminfo according to some constantly changing set of hacker guidelines -TD
3650 gnome-2007|GNOME Terminal snapshot 2.18.1,
3651 use=xterm+pcc2, use=gnome-fc5,
3653 # GNOME Terminal 2.22.3 (2008 snapshot)
3655 # In vttest, it claims to be a vt220 with national replacement character-sets,
3656 # but aside from the identifier string, implements only a small fraction of
3657 # vt220's behavior, which will make it less usable on a VMS system (unclear
3658 # what the intent of the developer is, since the NRC feature exposed in vttest
3659 # by this change does not work).
3660 gnome-2008|GNOME Terminal snapshot 2.22.3,
3661 use=gnome+pcfkeys, use=gnome-2007,
3663 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
3664 # supply key information which is not built into the program. With 2.22.3,
3665 # this list is built into the program (which addresses the inadvertant use of
3666 # random terminfo data, though using a set of values which does not correspond
3667 # to any that xterm produces - still not solving the problem that GNOME
3668 # terminal hardcodes the $TERM variable as "xterm").
3670 # terminfo modifier code keys
3671 # kf13-kf24 shift 2 F1 to F12
3672 # kf25-kf36 control 5 F1 to F12
3673 # kf37-kf48 shift/control 6 F1 to F12
3674 # kf49-kf60 alt 3 F1 to F12
3675 # kf61-kf63 shift-alt 4 F1 to F3
3677 # The parameters with \EO (SS3) are technically an error, since SS3 should have
3678 # no parameters. This appears to be rote copying based on xterm+pcc0.
3679 gnome+pcfkeys|gnome variation on xterm+pcfkeys,
3680 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
3681 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
3682 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
3683 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
3684 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
3685 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
3688 gnome|GNOME Terminal,
3691 # palette is hardcoded...
3692 gnome-256color|GNOME Terminal with xterm 256-colors,
3693 initc@, use=xterm+256color, use=gnome,
3695 # XFCE Terminal 0.2.5.4beta2
3697 # This is based on some of the same source code, e.g., the VTE library, as
3698 # gnome-terminal, but has fewer features, fails more screens in vttest.
3699 # Since most of the terminfo-related behavior is due to the VTE library,
3700 # the terminfo is the same as gnome-terminal.
3704 # Multi-Gnome-Terminal 1.6.2
3706 # This does not use VTE, and does have different behavior (compare xfce and
3708 mgt|Multi GNOME Terminal,
3709 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3711 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
3712 # or not is debatable).
3715 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
3718 # (formerly known as kvt)
3720 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
3721 # simplify this entry (and point out why konsole isn't xterm), we base this on
3722 # xterm-r6. The default keyboard appears to be 'linux'.
3725 # a) konsole implements several features from XFree86 xterm, though none of
3726 # that is documented - except of course in its source code - apparently
3727 # because its implementors are unaccustomed to reading documentation - as
3728 # evidenced by the sparse and poorly edited documentation distributed with
3729 # konsole. Some features such as the 1049 private mode are recognized but
3730 # incorrectly implemented as a duplicate of the 47 private mode.
3731 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
3732 # sends PC-style escapes rather than vt100.
3733 # c) fails vttest menu 3 (Test of character sets) because it does not properly
3734 # parse some control sequences. Also fails vttest Primary Device Attributes
3735 # by sending a bogus code (in the source it says it's supposed to be a
3736 # vt220, which is doubly incorrect because it does not implement vt220
3737 # control sequences except for a few special cases). Treat it as a
3738 # mildly-broken vt102.
3740 # Update for konsole 1.3.2:
3741 # The 1049 private mode works (but see the other xterm screens in vttest).
3742 # Primary Device Attributes now returns the code for a vt100 with advanced
3743 # video option. Perhaps that's intended to be a "mildly-broken vt102".
3745 # Updated for konsole 1.6.4:
3746 # add konsole-solaris
3748 # Updated for konsole 1.6.6:
3749 # add control-key modifiers for function-keys, etc.
3751 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
3752 # different from xterm (and vt100's). They have the same behavior in this
3753 # detail, but it is unclear which copies the other.
3754 konsole-base|KDE console window,
3756 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
3757 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
3758 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
3759 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
3760 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
3761 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
3762 rmso=\E[27m, rmul=\E[24m,
3763 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3764 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3765 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
3766 use=ecma+color, use=xterm-r6,
3767 konsole-linux|KDE console window with linux keyboard,
3768 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
3769 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
3770 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3771 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3773 konsole-solaris|KDE console window with Solaris keyboard,
3774 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3775 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
3776 # than testing the code.
3777 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
3778 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3779 # The value for kbs reflects local customization rather than the settings used
3780 # for XFree86 xterm.
3781 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
3782 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
3784 # Konsole does not implement shifted cursor-keys.
3785 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
3786 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
3788 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
3789 # it is still useful for deriving the other entries.
3790 konsole-vt100|KDE console window with vt100 (sic) keyboard,
3791 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
3792 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
3793 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
3794 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3795 khome=\E[H, use=konsole-base,
3796 konsole-vt420pc|KDE console window with vt420 pc keyboard,
3797 kbs=^H, kdch1=\177, use=konsole-vt100,
3798 konsole-16color|klone of xterm-16color,
3799 ncv#32, use=ibm+16color, use=konsole,
3800 # make a default entry for konsole
3801 konsole|KDE console window,
3804 # palette is hardcoded...
3805 konsole-256color|KDE console window with xterm 256-colors,
3806 initc@, use=xterm+256color, use=konsole,
3808 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
3810 # It is nominally a vt102 emulator, with features borrowed from rxvt and
3813 # The function keys are numbered based on shift/control/alt modifiers, except
3814 # that the control-modifier itself is used to spawn a new copy of mlterm (the
3815 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
3816 # how it is configured.
3818 # kf1 to kf12 \E[11~ to \E[24~
3819 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
3820 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
3821 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
3822 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
3823 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
3824 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
3825 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
3827 mlterm|multi lingual terminal emulator,
3828 am, eslok, km, mc5i, mir, msgr, npc, xenl,
3829 colors#8, cols#80, it#8, lines#24, pairs#64,
3830 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3831 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3832 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3833 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3834 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3835 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3836 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3837 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
3838 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3839 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
3840 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3841 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3842 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
3843 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
3844 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
3845 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3846 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
3847 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
3848 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
3849 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3850 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3851 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3852 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3853 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
3854 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
3856 # The insert/delete/home/end keys do not respond to modifiers because mlterm
3857 # looks in its termcap to decide which string to send. If it used terminfo
3858 # (when available), it could use the extended names introduced for xterm.
3859 mlterm+pcfkeys|fragment for PC-style fkeys,
3860 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
3861 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
3862 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
3863 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
3864 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
3865 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
3866 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
3867 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
3868 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
3870 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
3871 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
3874 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
3875 # but some applications don't work with that.
3876 # It also has an AIX extension
3880 # but the latter does not work correctly.
3882 # The distributed terminfo says it implements hpa and vpa, but they are not
3883 # implemented correctly, using relative rather than absolute positioning.
3885 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
3886 # Since rxvt is not really compatible with xterm, it should be configured as
3887 # "rxvt" or "rxvt-color".
3889 # removed dch/dch1 because they are inconsistent with bce/ech -TD
3890 # remove km as per tack test -TD
3891 rxvt-basic|rxvt terminal base (X Window System),
3892 OTbs, am, bce, eo, mir, msgr, xenl, xon,
3893 cols#80, it#8, lines#24,
3894 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3895 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3896 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3897 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3898 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3899 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3900 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
3901 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
3902 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
3903 ind=^J, is1=\E[?47l\E=\E[?1l,
3904 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
3905 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3906 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
3908 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3909 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3910 s0ds=\E(B, s1ds=\E(0, sc=\E7,
3911 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3912 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3913 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3914 use=rxvt+pcfkeys, use=vt220+keypad,
3915 # Key Codes from rxvt reference:
3917 # Note: Shift + F1-F10 generates F11-F20
3919 # For the keypad, use Shift to temporarily override Application-Keypad
3920 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
3921 # is off, escape sequences toggle Application-Keypad setting.
3922 # Also note that values of Home, End, Delete may have been compiled
3923 # differently on your system.
3925 # Normal Shift Control Ctrl+Shift
3926 # Tab ^I ESC [ Z ^I ESC [ Z
3927 # BackSpace ^H ^? ^? ^?
3928 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
3929 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
3930 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3931 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
3932 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
3933 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
3934 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
3935 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
3936 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3937 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
3938 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
3939 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
3940 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
3941 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
3942 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
3943 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
3944 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
3945 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
3946 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
3947 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
3948 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
3949 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
3950 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
3951 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
3952 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
3953 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
3954 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
3955 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
3956 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
3959 # Up ESC [ A ESC [ a ESC O a ESC O A
3960 # Down ESC [ B ESC [ b ESC O b ESC O B
3961 # Right ESC [ C ESC [ c ESC O c ESC O C
3962 # Left ESC [ D ESC [ d ESC O d ESC O D
3963 # KP_Enter ^M ESC O M
3964 # KP_F1 ESC O P ESC O P
3965 # KP_F2 ESC O Q ESC O Q
3966 # KP_F3 ESC O R ESC O R
3967 # KP_F4 ESC O S ESC O S
3968 # XK_KP_Multiply * ESC O j
3969 # XK_KP_Add + ESC O k
3970 # XK_KP_Separator , ESC O l
3971 # XK_KP_Subtract - ESC O m
3972 # XK_KP_Decimal . ESC O n
3973 # XK_KP_Divide / ESC O o
3985 # The source-code for rxvt actually defines mappings for F21-F35, using
3986 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
3987 # are rare, so this entry uses the shift- and control-modifiers as in
3988 # xterm+pcfkeys to define keys past F12.
3990 # kIC is normally not used, since rxvt performs a paste for that (shifted
3991 # insert), unless private mode 35 is set.
3993 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
3994 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
3995 rxvt+pcfkeys|fragment for PC-style fkeys,
3996 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
3997 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
3998 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
3999 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4000 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4001 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4002 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4003 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4004 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4005 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4006 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4007 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4008 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4009 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4010 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4011 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4012 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4013 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4014 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4015 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4017 rxvt|rxvt terminal emulator (X Window System),
4019 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4020 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4021 rxvt-color|rxvt terminal emulator (X Window System),
4023 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4024 use=xterm+256color, use=rxvt,
4025 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4026 use=xterm+88color, use=rxvt,
4027 rxvt-xpm|rxvt terminal emulator (X Window System),
4029 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4030 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4032 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4033 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4036 # This variant is supposed to work with rxvt 2.7.7 when compiled with
4037 # NO_BRIGHTCOLOR defined. rxvt needs more work...
4038 rxvt-16color|xterm with 16 colors like aixterm,
4039 ncv#32, use=ibm+16color, use=rxvt,
4043 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4044 # makes its function-keys different from other flavors of rxvt -TD
4045 mrxvt|multitabbed rxvt,
4046 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4047 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4048 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4049 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4050 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4051 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4054 mrxvt-256color|multitabbed rxvt with 256 colors,
4055 use=xterm+256color, use=mrxvt,
4057 # From: Michael Jennings <mej@valinux.com>
4061 # removed kf0 which conflicts with kf10 -TD
4062 # remove cvvis which conflicts with cnorm -TD
4063 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4064 # but does otherwise follow the rxvt+pcfkeys model -TD
4065 # remove nonworking flash -TD
4066 # remove km as per tack test -TD
4067 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4068 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
4069 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4070 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4071 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4072 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4073 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4074 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4075 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4076 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4077 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4078 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4079 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4080 is1=\E[?47l\E>\E[?1l,
4081 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4082 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4083 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4084 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4085 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4086 rmso=\E[27m, rmul=\E[24m,
4087 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4088 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4090 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4091 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4092 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4093 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4096 Eterm-256color|Eterm with xterm 256-colors,
4097 use=xterm+256color, use=Eterm,
4099 Eterm-88color|Eterm with 88 colors,
4100 use=xterm+88color, use=Eterm,
4102 # Based on rxvt 2.4.8, it has a few differences in key bindings
4103 aterm|AfterStep terminal,
4104 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4107 # This is not based on xterm's source...
4108 # vttest shows several problems with keyboard, cursor-movements.
4109 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4110 xiterm|internationalized terminal emulator for X,
4112 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4114 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4115 # variant of xterm which is apparently no longer supported, but are interesting
4116 # because they illustrate SVr4 curses mouse controls - T.Dickey
4117 xtermm|xterm terminal emulator (monocrome),
4118 OTbs, am, km, mir, msgr, xenl,
4119 btns#3, cols#80, it#8, lines#24,
4120 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4121 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4122 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4123 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4124 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4125 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4126 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4127 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4128 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4129 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4130 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4131 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4132 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4133 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4134 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4135 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4136 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4137 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4138 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4140 xtermc|xterm terminal emulator (color),
4141 colors#8, ncv#7, pairs#64,
4142 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4143 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4144 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4147 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4148 # Here's a termcap entry I've been using for xterm_color, which comes
4149 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4150 # color stuff, I also have a status line defined as the window manager
4151 # title bar. [I have translated it to terminfo -- ESR]
4152 xterm-pcolor|xterm with color used for highlights and status line,
4153 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
4154 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
4156 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4157 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4158 # chars look like --esr)
4159 hpterm|X-hpterm|hp X11 terminal emulator,
4160 am, da, db, mir, xhp,
4161 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4162 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4163 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4164 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4165 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4166 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4167 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4168 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4169 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4170 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4171 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4172 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4173 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4174 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4175 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4177 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4178 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4179 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4180 # HPUX 11 provides a color version.
4181 hpterm-color|HP X11 terminal emulator with color,
4185 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4186 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4188 # This entry describes an xterm with Sun-style function keys enabled
4189 # via the X resource setting "xterm*sunFunctionKeys:true"
4190 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4191 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4192 # because we want it to be seen as <kcpy>.
4193 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4194 # with their Sun keyboard labels instead.
4195 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4196 xterm-sun|xterm with sunFunctionKeys true,
4197 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4198 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4199 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4200 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4201 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4202 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4203 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4204 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4205 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4206 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4207 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4208 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4210 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4211 cols#80, lines#24, use=xterm-sun,
4213 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4214 # It corresponds to emu's internal emulation:
4216 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4217 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4218 # fixes: add civis, cnorm, sgr -TD
4219 emu|emu native mode,
4220 am, bce, mir, msgr, xon,
4221 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4222 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4223 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4224 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4225 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
4226 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4227 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4228 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4229 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4230 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4231 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4232 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4233 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4234 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4235 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4236 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4237 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4238 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4240 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4241 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4243 # vt220 Terminfo entry for the Emu emulation, corresponds to
4245 # with NumLock set (to make the keypad transmit kf0-kf9).
4246 # fixes: add am, xenl, corrected sgr0 -TD
4247 emu-220|Emu-220 (vt200-7bit mode),
4249 cols#80, it#8, lines#24, vt#200,
4250 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4251 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4252 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4253 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4254 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4255 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4256 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4257 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4258 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4259 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4260 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4261 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4262 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4263 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4264 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4265 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4266 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4267 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4268 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4269 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4270 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4271 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4272 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4273 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4274 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4275 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4276 # indicate that it emulates more than one terminal, but incompletely.
4278 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4279 # It is based on vt102's entry, with some subtle differences, but also
4281 # supports ANSI colors (except for 'op' string)
4282 # apparently implements alternate screen like xterm
4283 # does not use padding, of course.
4284 mvterm|vv100|SwitchTerm aka mvTERM,
4285 am, eslok, hs, km, mir, msgr, xenl,
4286 colors#8, cols#80, it#8, lines#24, pairs#64,
4287 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4288 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4289 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4290 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4291 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4292 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4293 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4294 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4295 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4296 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4297 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4298 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4299 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4301 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4302 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4303 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4304 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4305 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4306 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4310 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4312 # "mterm -type ansi" sets $TERM to "ansi"
4313 mterm-ansi|ANSI emulation,
4316 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4317 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4318 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4319 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4320 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4321 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4322 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4323 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4324 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4325 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4327 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4328 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4330 # mterm normally sets $TERM to "mterm"
4331 mterm|mouse-sun|Der Mouse term,
4334 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4335 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4336 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4337 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4338 # "mterm -type decansi" sets $TERM to "decansi"
4340 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4341 decansi|ANSI emulation with DEC compatibility hacks,
4342 am, mir, msgr, xenl,
4343 colors#8, it#8, pairs#64,
4344 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4345 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4346 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4347 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4348 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4349 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4350 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4351 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4352 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4353 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4354 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4355 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4356 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4357 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4358 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4359 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4360 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4361 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4362 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4363 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4364 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4365 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4366 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4367 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4368 u7=\E[6n, vpa=\E[%i%p1%dd,
4372 # vwmterm is a terminal emulator written for the VWM console window manager
4375 am, bce, ccc, mir, msgr, npc, xenl, xon,
4377 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4378 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4379 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
4380 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4381 cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, home=\E[H,
4382 il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, kcud1=\E[B,
4383 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
4384 kf10=\E[21~, kf11=\E[22~, kf12=\E[23~, kf2=\E[[B,
4385 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4386 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, knp=\E[6~, kpp=\E[5~,
4387 rev=\E[7m, rmacs=\E[10m, rmam=\E[?7l, rmcup=\E[?1049l,
4388 rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
4390 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4391 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4392 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4396 # MGR is a Bell Labs window system lighter-weight than X.
4397 # These entries describe MGR's xterm-equivalent.
4398 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4401 mgr|Bellcore MGR (non X) window system terminal emulation,
4403 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4404 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4405 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4406 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4407 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4408 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4409 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4410 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4411 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4413 mgr-sun|Mgr window with Sun keyboard,
4414 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4415 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4416 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4417 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4418 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4419 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4420 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4421 mgr-linux|Mgr window with Linux keyboard,
4422 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4423 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4424 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4425 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4426 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4428 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4431 # Columbus UNIX virtual terminal. This terminal also appears in
4432 # UNIX 4.0 and successors as line discipline 1 (?), but is
4433 # undocumented and does not really work quite right.
4434 cbunix|cb unix virtual terminal,
4436 cols#80, lines#24, lm#0,
4437 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4438 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4439 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4440 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4441 smso=\Ea^D, smul=\Ea^A,
4442 # (vremote: removed obsolete ":nl@:" -- esr)
4443 vremote|virtual remote terminal,
4445 cols#79, use=cbunix,
4447 pty|4bsd pseudo teletype,
4448 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4449 smso=\Ea$, smul=\Ea!, use=cbunix,
4451 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4452 eterm|gnu emacs term.el terminal emulation,
4455 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4456 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4457 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4458 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4459 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4460 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4461 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4462 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4463 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4466 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4467 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4468 am, mir, msgr, xenl,
4469 colors#8, cols#80, lines#24, pairs#64,
4470 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4471 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4472 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4473 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4474 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4475 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4476 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4477 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4478 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4479 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4480 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4481 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4482 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4483 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4484 u6=\E[%i%d;%dR, u7=\E[6n,
4486 # Entries for use by the `screen' program by Juergen Weigert,
4487 # Michael Schroeder, Oliver Laumann. The screen and
4488 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4489 # come from University of Wisconsin and may be older.
4490 # (screen: added <cnorm> on ANSI model -- esr)
4492 # 'screen' defines extensions to termcap. Some are used in its terminal
4494 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4495 # AX (bool) Does understand ANSI set default fg/bg color
4496 # (\E[39m / \E[49m).
4497 # S0 (str) Switch charset 'G0' to the specified charset.
4498 # E0 (str) Switch charset 'G0' back to standard charset.
4500 # tested with screen 3.09.08
4501 screen|VT 100/ANSI X3.64 virtual terminal,
4502 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4503 colors#8, cols#80, it#8, lines#24, pairs#64,
4504 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4505 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4506 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4507 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4508 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4509 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4510 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4511 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4512 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4513 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4514 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4515 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4516 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4517 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4518 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4519 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4520 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4521 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4522 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4523 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4524 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4525 S0=\E(%p1%c, use=ecma+color,
4526 # The bce and status-line entries are from screen 3.9.13 (and require some
4527 # changes to .screenrc).
4528 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4530 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4531 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4533 # ======================================================================
4534 # Entries for GNU Screen with 16 colors.
4535 # Those variations permit to benefit from 16 colors palette, and from
4536 # bold font and blink attribute separated from bright colors. But they
4537 # are less portable than the generic "screen" 8 color entries: Their
4538 # usage makes real sense only if the terminals you attach and reattach
4539 # do all support 16 color palette.
4541 screen-16color|GNU Screen with 16 colors,
4542 use=ibm+16color, use=screen,
4544 screen-16color-s|GNU Screen with 16 colors and status line,
4545 use=ibm+16color, use=screen-s,
4547 screen-16color-bce|GNU Screen with 16 colors and BCE,
4548 use=ibm+16color, use=screen-bce,
4550 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
4551 bce, use=ibm+16color, use=screen-s,
4553 # ======================================================================
4554 # Entries for GNU Screen 4.02 with --enable-colors256.
4556 screen-256color|GNU Screen with 256 colors,
4558 initc@, use=xterm+256color, use=screen,
4560 screen-256color-s|GNU Screen with 256 colors and status line,
4562 initc@, use=xterm+256color, use=screen-s,
4564 screen-256color-bce|GNU Screen with 256 colors and BCE,
4566 initc@, use=xterm+256color, use=screen-bce,
4568 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
4570 initc@, use=xterm+256color, use=screen-s,
4572 # ======================================================================
4574 # Read the fine manpage:
4575 # When screen tries to figure out a terminal name for
4576 # itself, it first looks for an entry named "screen.<term>",
4577 # where <term> is the contents of your $TERM variable. If
4578 # no such entry exists, screen tries "screen" (or "screen-w"
4579 # if the terminal is wide (132 cols or more)). If even this
4580 # entry cannot be found, "vt100" is used as a substitute.
4582 # Notwithstanding the manpage, screen uses its own notion of the termcap
4583 # and some keys from "screen.<term>" are ignored. Here is an entry which
4584 # covers those (tested with screen 4.00.02) -TD
4585 screen+fkeys|function-keys according to screen,
4586 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
4589 # Here are a few customized entries which are useful -TD
4592 # (a) screen does not support invis.
4593 # (b) screen's implementation of bw is incorrect according to tack.
4594 # (c) screen appears to hardcode the strings for khome/kend, making it
4595 # necessary to override the "use=" clause's values (screen+fkeys).
4596 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4597 # which is NOT the same as the terminfo screen.<term>.
4598 # (e) when screen finds one of these customized entries, it sets $TERM to
4599 # match. Hence, no "screen.xterm" entry is provided, since that would
4600 # create heartburn for people running remote xterm's.
4602 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
4603 # since the default translations override the built-in keycode
4604 # translation. They are suppressed here to show what is tested by tack.
4605 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4607 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
4608 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
4609 use=screen+fkeys, use=xterm-new,
4610 # xterm-r6 does not really support khome/kend unless it is propped up by
4611 # the translations resource.
4612 screen.xterm-r6|screen customized for X11R6 xterm,
4613 bw, use=screen+fkeys, use=xterm-r6,
4614 # Color applications running in screen and TeraTerm do not play well together
4615 # on Solaris because Sun's curses implementation gets confused.
4616 screen.teraterm|disable ncv in teraterm,
4618 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4619 use=screen+fkeys, use=screen,
4621 screen.rxvt|screen in rxvt,
4623 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4624 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4625 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4626 screen.Eterm|screen in Eterm,
4627 use=screen+fkeys, use=Eterm,
4628 screen.mrxvt|screen in mrxvt,
4629 use=screen+fkeys, use=mrxvt,
4630 screen.gnome|screen in GNOME Terminal,
4631 use=screen+fkeys, use=gnome,
4632 screen.konsole|screen in KDE console window,
4633 use=screen+fkeys, use=konsole,
4634 # fix the backspace key
4635 screen.linux|screen in linux console,
4637 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4638 screen.mlterm|screen in mlterm,
4639 use=screen+fkeys, use=mlterm,
4641 # The default "screen" entry is reasonably portable, but not optimal for the
4642 # most widely-used terminal emulators. The "bce" capability is supported in
4643 # screen since 3.9.13, and when used, will require fewer characters to be sent
4644 # to the terminal for updates.
4646 # If you are using only terminals which support bce, then you can use this
4647 # feature in your screen configuration.
4649 # Adding these lines to your ".screenrc" file will allow using these customized
4654 screen-bce.xterm-new|screen optimized for modern xterm,
4655 bce, use=screen.xterm-new,
4656 screen-bce.rxvt|screen optimized for rxvt,
4657 bce, use=screen.rxvt,
4658 screen-bce.Eterm|screen optimized for Eterm,
4659 bce, use=screen.Eterm,
4660 screen-bce.mrxvt|screen optimized for mrxvt,
4661 bce, use=screen.mrxvt,
4662 screen-bce.gnome|screen optimized for GNOME-Terminal,
4663 bce, use=screen.gnome,
4664 screen-bce.konsole|screen optimized for KDE console window,
4665 bce, use=screen.konsole,
4666 screen-bce.linux|screen optimized for linux console,
4667 bce, use=screen.linux,
4668 screen-bce.mlterm|screen optimized for mlterm,
4669 bce, use=screen.mlterm,
4671 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
4672 cols#132, use=screen,
4674 screen2|old VT 100/ANSI X3.64 virtual terminal,
4675 cols#80, it#8, lines#24,
4676 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
4677 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4678 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4679 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4680 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
4681 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4682 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
4683 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
4684 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
4685 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
4686 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
4687 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
4688 screen3|older VT 100/ANSI X3.64 virtual terminal,
4690 cols#80, it#8, lines#24,
4691 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
4692 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4693 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4694 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4695 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4696 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4697 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
4698 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
4699 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
4700 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
4701 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
4702 smul=\E[4m, tbc=\E[3g,
4704 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
4705 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
4706 # been maintained until recently by the National Center for Supercomputer
4707 # Applications, and it is feature rich, stable and free. It can be downloaded
4708 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
4709 # xterm+sl, and the docs at NCSA. It works well.
4711 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
4712 # The terminal options should be set as follows:
4713 # Xterm sequences ON
4714 # use VT wrap mode ON
4715 # use Emacs arrow keys OFF
4716 # CTRL-COMND is Emacs meta ON
4718 # answerback string: "ncsa-vt220-8"
4719 # setup keys: all disabled
4721 # Application mode is not used.
4723 # Other special mappings:
4730 # PAGEDOWN Next Screen
4732 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
4735 # The status-line manipulation is a mapping of the xterm-compatible control
4736 # sequences for setting the window-title. So you must use tsl and fsl in
4737 # pairs, since the latter ends the string that is loaded to the window-title.
4738 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4739 am, hs, km, mir, msgr, xenl,
4740 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4741 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4742 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4743 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4744 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4745 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4746 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4747 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4748 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
4749 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
4750 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
4751 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
4752 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4753 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
4754 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
4755 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
4756 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
4757 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
4758 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
4759 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
4760 rmso=\E[27m, rmul=\E[24m,
4761 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
4762 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4763 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
4764 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
4765 u8=\E[?62;1;6c, use=ansi+enq,
4766 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4767 use=ncsa-m, use=klone+color,
4768 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4770 dsl@, fsl@, tsl@, use=ncsa,
4771 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4773 dsl@, fsl@, tsl@, use=ncsa-m,
4775 # The documented function-key mapping refers to the Apple Extended Keyboard
4776 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
4777 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
4778 # some keyboards and many applications require these as F1-F4.
4780 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
4781 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4782 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4783 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
4784 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
4785 kf8=\E[19~, kf9=\E[20~, use=ncsa,
4787 #### Pilot Pro Palm-Top
4789 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
4790 # http://www.ai/~iang/TGssh/
4791 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
4794 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
4795 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
4796 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
4799 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
4800 # These entries are for the Embeddable Linux Kernel System (ELKS)
4801 # project - an heavily stripped down Linux to be run on 16 bit
4802 # boxes or, eventually, to be used in embedded systems - and have been
4803 # adapted from the stock ELKS termcap. The project itself looks stalled,
4804 # and the latest improvements I know of date back to March 2000.
4806 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
4807 # as an added bonus, this deals with all the capabilities common to
4808 # both VT52 and ANSI (or, eventually, "special") modes.
4810 elks-glasstty|ELKS glass-TTY capabilities,
4812 cols#80, it#8, lines#25,
4813 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
4816 elks-vt52|ELKS vt52 console,
4817 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
4818 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
4819 home=\EH, use=elks-glasstty,
4821 elks-ansi|ELKS ANSI console,
4822 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4823 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4824 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
4826 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
4827 # instead of VT52, but the "elks" entry still refers to the latter.
4829 elks|default ELKS console,
4832 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
4833 # one but in screen size
4835 sibo|ELKS SIBO console,
4836 cols#61, it#8, lines#20, use=elks-vt52,
4838 ######## COMMERCIAL WORKSTATION CONSOLES
4844 # This is from the OSF/1 Release 1.0 termcap file
4845 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
4848 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4849 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4850 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
4851 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
4852 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4857 # :is1: resets scrolling region in case a previous user had used "tset vt100"
4858 oldsun|Sun Microsystems Workstation console,
4859 OTbs, am, km, mir, msgr,
4860 cols#80, it#8, lines#34,
4861 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
4862 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4863 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4864 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4865 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4866 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
4867 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4868 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
4869 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
4870 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
4871 sun-il|Sun Microsystems console with working insert-line,
4874 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4875 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4876 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4877 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4878 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4879 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
4880 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
4881 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
4882 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
4883 knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
4884 kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
4885 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
4886 u8=\E[1t, u9=\E[11t,
4887 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
4888 # flake out on the last line. Unfortunately, without them the terminal has no
4890 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
4891 il@, il1@, use=sun-il,
4892 # If you are using an SS5, change the sun definition to use sun-ss5.
4893 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
4896 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
4897 sun-s|Sun Microsystems Workstation window with status line,
4899 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
4900 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
4902 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
4903 sun-48|Sun 48-line window,
4904 cols#80, lines#48, use=sun,
4905 sun-34|Sun 34-line window,
4906 cols#80, lines#34, use=sun,
4907 sun-24|Sun 24-line window,
4908 cols#80, lines#24, use=sun,
4909 sun-17|Sun 17-line window,
4910 cols#80, lines#17, use=sun,
4911 sun-12|Sun 12-line window,
4912 cols#80, lines#12, use=sun,
4913 sun-1|Sun 1-line window for sysline,
4916 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
4917 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
4918 ich1@, rmir@, smir@, use=sun,
4919 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
4921 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
4922 sun-type4|Sun Workstation console with type 4 keyboard,
4923 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
4924 kcuu1=\E[215z, use=sun-il,
4926 # Most of the current references to sun-color are from users wondering why this
4927 # is the default on install. Details from reading the wscons manpage, adding
4928 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
4929 # when those were added -TD (2005-05-28)
4931 # According to wscons manpage, color is supported only on IA systems.
4932 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
4933 # does not list these. It also sets ncv#3, however that corresponds to
4934 # underline and standout.
4936 # Since the documentation and terminfo do not agree, see also current code at
4937 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
4939 # That (actually a different driver which "supports" sun-color) also supports
4946 # It supports bold, but not underline -TD (2009-09-19)
4947 sun-color|Sun Microsystems Workstation console with color support (IA systems),
4948 colors#8, ncv#3, pairs#64,
4949 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
4950 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm,
4952 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4953 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4959 # (wsiris: this had extension capabilities
4960 # :HS=\E7F2:HE=\E7F7:\
4961 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
4962 # See the note on Iris extensions near the end of this file.
4963 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
4964 # <flash> from BRL -- esr)
4965 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
4966 OTbs, OTnc, OTpt, am,
4967 OTkn#3, cols#80, it#8, lines#40,
4968 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
4969 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
4970 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
4971 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
4972 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
4973 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
4974 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
4975 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
4980 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
4981 # environment). Note: these have nothing to do with Sony's News workstation
4985 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
4986 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
4987 psterm|psterm-basic|NeWS psterm-80x34,
4988 OTbs, am, hs, km, ul,
4989 cols#80, it#8, lines#34,
4990 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
4991 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
4992 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
4993 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
4994 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
4995 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
4996 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
4998 psterm-96x48|NeWS psterm 96x48,
4999 cols#96, lines#48, use=psterm,
5000 psterm-90x28|NeWS psterm 90x28,
5001 cols#90, lines#28, use=psterm,
5002 psterm-80x24|NeWS psterm 80x24,
5003 cols#80, lines#24, use=psterm,
5004 # This is a faster termcap for psterm. Warning: if you use this termcap,
5005 # some control characters you type will do strange things to the screen.
5006 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5007 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5008 OTbs, am, hs, km, ul,
5009 cols#80, it#8, lines#34,
5010 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5011 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5012 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5013 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5014 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5015 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5016 smso=^Oo, smul=^Ou, tsl=^Ol,
5020 # Use `glasstty' for the Workspace application
5023 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5026 cols#80, it#8, lines#24,
5027 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5028 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5029 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5030 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5031 nextshell|NeXT Shell application,
5034 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5037 #### Sony NEWS workstations
5040 # (news-unk: this had :KB=news: -- esr)
5041 news-unk|SONY NEWS vt100 emulator common entry,
5042 OTbs, OTpt, am, xenl,
5044 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5045 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5046 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5047 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5048 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5049 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5050 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5051 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5052 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5053 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5054 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5055 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5057 # (news-29: this had :TY=ascii: --esr)
5059 lines#29, use=news-unk,
5060 # (news-29-euc: this had :TY=euc: --esr)
5063 # (news-29-sjis: this had :TY=sjis: --esr)
5067 # (news-33: this had :TY=ascii: --esr)
5069 lines#33, use=news-unk,
5070 # (news-33-euc: this had :TY=euc: --esr)
5073 # (news-33-sjis: this had :TY=sjis: --esr)
5077 # (news-42: this had :TY=ascii: --esr)
5079 lines#42, use=news-unk,
5080 # (news-42-euc: this had :TY=euc: --esr)
5083 # (news-42-sjis: this had :TY=sjis: --esr)
5087 # NEWS-OS old termcap entry
5089 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
5090 news-old-unk|SONY NEWS vt100 emulator common entry,
5091 OTbs, OTpt, am, xenl,
5093 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5094 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5095 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5096 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5097 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5098 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5099 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5100 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5101 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5103 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5104 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5107 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5110 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5111 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5113 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5116 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
5117 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5120 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5123 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5124 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5127 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5130 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5131 # also the alias vt100-bm.
5132 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5135 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5138 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5139 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5142 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5145 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5146 news28|sony vt100 emulator 28 lines,
5149 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5152 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5153 news29|news28-a|sony vt100 emulator 29 lines,
5155 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5158 # (news511: this had :TY=sjis: --esr)
5159 nwp511|nwp-511|nwp-511 vt100,
5160 OTbs, OTpt, am, xenl,
5162 clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
5163 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5164 ed=\E[J$<30/>, el=\E[K$<3/>,
5165 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5166 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5167 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5168 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5169 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5170 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5171 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5172 # (news517: this had :TY=sjis:. --esr)
5173 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5176 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5177 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5178 tsl=\E[1$}\E[;%df, use=vt200,
5179 # (news517-w: this had :TY=sjis:. --esr)
5180 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5183 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5184 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5185 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5186 tsl=\E[1$}\E[;%df, use=vt200,
5188 #### Common Desktop Environment
5191 # This ships with Sun's CDE in Solaris 2.5
5192 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5193 dtterm|CDE desktop terminal,
5194 am, mir, msgr, xenl, xon,
5195 cols#80, it#8, lines#24, lm#0, ncv@,
5196 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5197 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5198 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5199 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5200 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5201 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5202 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5203 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5204 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5205 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5206 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5207 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5208 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5209 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5210 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5211 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5212 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5213 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5214 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5215 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5217 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5218 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5219 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5221 #### Non-Unix Consoles
5224 ### EMX termcap.dat compatibility modes
5226 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5227 # no_color_video to inform the application that standout(1), underline(2)
5228 # reverse(4) and invisible(64) don't work with color.
5229 emx-base|DOS special keys,
5232 bel=^G, use=ansi.sys,
5234 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5235 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5236 # names longer than 14 characters, the nominal maximum).
5238 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5239 ansi-emx|ANSI.SYS color,
5240 am, bce, eo, mir, msgr, xon,
5241 colors#8, cols#80, it#8, lines#25, pairs#64,
5242 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5243 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5244 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5245 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5246 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5247 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5248 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5249 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5250 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5251 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5252 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5253 u9=\E[c, use=emx-base,
5254 # nice colors for Emacs (white on blue, mode line white on cyan)
5255 ansi-color-2-emx|ANSI.SYS color 2,
5256 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5257 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5258 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5259 smul=\E[1;36;44m, use=ansi-emx,
5260 # nice colors for Emacs (white on black, mode line black on cyan)
5261 ansi-color-3-emx|ANSI.SYS color 3,
5262 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5263 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5264 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5265 smul=\E[0;36;40m, use=ansi-emx,
5266 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5268 cols#80, it#8, lines#24,
5269 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5270 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5271 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5272 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5273 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5274 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5277 # Use this for cygwin32 (tested with beta 19.1)
5278 # underline is colored bright magenta
5279 # shifted kf1-kf12 are kf11-kf22
5280 cygwinB19|ansi emulation for cygwin32,
5281 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5282 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5283 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5284 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5285 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5286 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5287 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5290 # Use this for cygwin (tested with version 1.1.0).
5291 # I've combined pcansi and linux. Some values of course were different and
5292 # I've indicated which of these were and which I used.
5293 # Cheers, earnie_boyd@yahoo.com
5294 # several changes based on running with tack and comparing with older entry -TD
5295 # more changes from csw:
5297 # remove eo [erase overstrike with blank]
5298 # change clear was \E[H\E[J now \E[2J (faster?)
5301 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5303 # add cub [cursor back param]
5304 # add cuf [cursor forward param]
5305 # add cuu [cursor up param]
5306 # add cud [cursor down param]
5307 # add hs [has status line]
5308 # add fsl [return from status line]
5309 # add tsl [go to status line]
5310 # add smacs [Start alt charset] (not sure if this works)
5311 # add rmacs [End alt charset] (ditto)
5312 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5313 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5314 # add kb2 [center of keypad]
5315 # add u8 [user string 8] \E[?6c
5316 # add el [clear to end of line] \E[K
5318 # cnorm [make cursor normal] not implemented
5319 # flash [flash] not implemented
5320 # blink [blink] not implemented very usefully in cygwin? \E[5m
5321 # dim [dim] not implemented very usefully in cygwin? \E[2m
5322 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5323 # kNXT [shifted next key] not implemented
5324 # kPRV [shifted prev key] not implemented
5325 # khome [home key] really is \E[1~ NOT \E[H
5326 # tbc [clear tab stops] not implemented
5327 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5328 # smpch [Start PC charset] is \E[11m, same as smacs
5329 # rmpch [End PC charset] is \E[10m, same as rmacs
5330 # mir [move in insert mode] fails in tack?
5331 # bce [back color erase] causes problems with change background color?
5332 # cvvis [make cursor very visible] causes a stackdump when testing with
5333 # testcurs using the output option? \E[?25h\E[?8c
5334 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5335 # ech [erase characters param] broken \E[%p1%dX
5336 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5339 # Remove cbt since it does not work in current cygwin
5340 # Add 'mir' and 'in' flags based on tack
5341 cygwin|ansi emulation for Cygwin,
5342 am, hs, mir, msgr, xon,
5343 colors#8, it#8, pairs#64,
5344 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5345 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5346 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5347 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5348 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5349 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5350 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5351 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5352 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5353 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5354 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5355 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5356 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5357 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5358 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5359 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5360 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5361 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5362 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5363 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5364 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5365 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5366 vpa=\E[%i%p1%dd, use=vt102+enq,
5368 # I've supplied this so that you can help test new values and add other
5369 # features. Cheers, earnie_boyd@yahoo.com.
5371 # Some features are from pcansi. The op value is from linux. Function-keys
5372 # are from linux. These have been tested not to cause problems. xenl was in
5373 # this list, but DOES cause problems so it has been removed
5374 cygwinDBG|Debug Version for Cygwin,
5375 am, eo, mir, msgr, xon,
5376 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5377 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5378 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5379 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5380 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5381 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5382 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5383 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5384 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5385 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5386 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5387 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5388 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5389 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5390 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5391 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5392 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5393 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5394 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5395 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5396 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5397 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5398 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5399 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5400 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5403 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5404 # encodings used by other x86 environments. All others are invented for DJGPP.
5405 # Oddly enough, while several combinations of modifiers are tabulated, there is
5406 # none for shifted cursor keys.
5458 # Ctrl-Delete \E[43~
5459 # Ctrl-Down Arrow \E[38~
5462 # Ctrl-Insert \E[42~
5463 # Ctrl-Left Arrow \E[39~
5464 # Ctrl-Page Down \E[46~
5465 # Ctrl-Page Up \E[45~
5466 # Ctrl-Right Arrow \E[40~
5467 # Ctrl-Up Arrow \E[37~
5483 # Alt-Down Arrow \E[60~
5487 # Alt-Left Arrow \E[61~
5488 # Alt-Page Down \E[68~
5489 # Alt-Page Up \E[67~
5490 # Alt-Right Arrow \E[62~
5491 # Alt-Up Arrow \E[59~
5520 djgpp|ansi emulation for DJGPP alpha,
5521 am, bce, msgr, xhp, xon, xt,
5522 colors#8, it#8, pairs#64,
5523 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5524 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5525 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5526 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5527 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5528 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5529 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5530 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5531 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5532 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5533 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5534 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5535 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5536 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5537 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5538 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5539 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5540 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5541 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5543 djgpp203|Entry for DJGPP 2.03,
5545 cols#80, it#8, lines#25,
5546 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5549 djgpp204|Entry for DJGPP 2.04,
5551 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5552 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5553 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5554 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5555 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5556 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5557 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5558 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5559 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5560 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5561 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5562 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5563 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5564 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5565 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
5566 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
5568 # This is tested using U/Win's telnet. Scrolling is omitted because it is
5569 # buggy. Another odd bug appears when displaying "~" in alternate character
5570 # set (the emulator spits out error messages). Compare with att6386 -TD
5571 uwin|U/Win 3.2 console,
5572 am, eo, in, msgr, xenl, xon,
5573 colors#8, it#8, ncv#58, pairs#64,
5574 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5575 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5576 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
5577 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5578 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
5579 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
5580 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5581 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
5582 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
5583 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
5584 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
5585 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
5586 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5587 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
5588 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
5589 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
5591 # This entry fits the Windows NT console when the _POSIX_TERM environment
5592 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
5593 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
5594 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
5595 # systems is not, and (surprise!) they match very well.
5597 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
5598 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
5599 # are the installation instructions a pile of mind-numbing bureaucratese,
5600 # but the termcap entry is actually broken and unusable as given; the :do:
5601 # capability is misspelled "d".
5603 # To use this, you need to a bunch of environment variables:
5605 # SET _POSIX_TERM=on
5607 # SET TERMCAP=location of termcap file in POSIX file format
5608 # which is case-sensitive.
5609 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
5612 # Important note: setting the TMP environment variable in POSIX style renders
5613 # it incompatible with a lot of other applications, including Visual C++. So
5614 # you should have a separate command window just for vi. All the other
5615 # variables may be permanently set in the Control Panel\System applet.
5617 # You can find out more about the restrictions of this facility at
5618 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
5620 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
5621 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
5623 cols#80, it#8, lines#25,
5624 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5625 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5626 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
5627 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
5628 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
5629 # From: jew@venus.sunquest.com
5630 # Date: 19 Feb 93 23:41:07 GMT
5631 # Here's a combination of ansi and vt100 termcap
5632 # entries that works nearly perfectly for me
5633 # (Gateway 2000 Handbook and Microsoft Works 3.0):
5634 pcmw|PC running Microsoft Works,
5636 cols#80, it#8, lines#24, vt#3,
5637 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
5638 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
5639 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
5640 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
5641 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
5642 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5643 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
5644 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
5645 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5646 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5647 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5650 # From: Federico Bianchi
5651 # This is the entry for the OpenNT terminal.
5652 # The ntconsole name is for backward compatability.
5653 # This is for OpenNT 2.0 and later.
5654 # Later OpenNT was renamed to Interix.
5656 # Presently it is distributed by Microsoft as Services For Unix (SFU).
5657 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
5658 # the documentation dates from 1.9.9e) -TD
5660 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
5662 colors#8, cols#80, lines#25, ncv#3, pairs#64,
5663 acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
5664 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
5665 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
5666 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5667 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5668 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5669 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5670 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
5671 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
5672 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
5673 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
5674 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
5675 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
5676 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
5677 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
5678 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
5679 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
5680 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
5681 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
5682 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
5683 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
5684 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
5685 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
5686 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
5687 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5688 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
5689 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
5691 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
5692 lines#35, use=opennt,
5694 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
5695 lines#50, use=opennt,
5697 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
5698 lines#60, use=opennt,
5700 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
5701 lines#100, use=opennt,
5703 # OpenNT wide terminals
5704 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
5705 cols#125, use=opennt,
5707 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
5708 lines#35, use=opennt-w,
5710 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
5711 lines#50, use=opennt-w,
5713 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
5714 lines#60, use=opennt-w,
5716 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
5717 cols#132, use=opennt,
5719 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
5720 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
5721 rmcup@, smcup@, use=opennt,
5723 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
5724 lines#35, use=opennt-nti,
5726 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
5727 lines#50, use=opennt-nti,
5729 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
5730 lines#60, use=opennt-nti,
5732 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
5733 lines#100, use=opennt-nti,
5735 ######## COMMON TERMINAL TYPES
5737 # This section describes terminal classes and maker brands that are still
5738 # quite common, but have proprietary command sets not blessed by ANSI.
5743 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
5744 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
5745 # Acer has a web site at http://www.acer.com.
5747 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
5748 # His comments suggest they were shipped with the system.
5751 # (altos2: had extension capabilities
5752 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5753 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5754 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5755 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5756 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5757 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
5758 # :HL=^AP\r:SP=\E[i:\
5759 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5760 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
5761 # Comparison with the k* capabilities makes it obvious that the c* things are
5762 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
5763 # :sr: was given as a boolean-- esr)
5764 altos2|alt2|altos-2|altos II,
5765 cols#80, it#8, lines#24, xmc#0,
5766 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
5767 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
5768 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
5769 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
5770 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
5771 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
5772 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
5773 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5774 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5775 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5776 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5777 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
5778 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
5779 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
5780 # (altos3: had extension capabilities
5781 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5782 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5783 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5784 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5785 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5786 # :HL=^AP\r:SP=\E[i:\
5787 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5788 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
5789 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
5790 altos4|alt4|altos-4|altos IV,
5792 # (altos7: had extension capabilities:
5793 # :GG#0:GI=\EH8:GF=\EH7:\
5794 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5795 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5796 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5797 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5798 # Comparison with the k* capabilities makes it obvious that the c* things are
5799 # shift keys. I have renamed them to keys 32 and up accordingly. I have
5800 # also made this entry relative to adm12 in order to give it an <sgr>. The
5801 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
5802 altos7|alt7|altos VII,
5804 cols#80, lines#24, xmc#0,
5805 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
5806 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5807 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5808 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
5810 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
5811 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
5812 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
5813 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5814 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5815 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5816 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5817 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
5818 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
5819 rmir=\Er, smir=\Eq, use=adm+sgr,
5820 altos7pc|alt7pc|altos PC VII,
5821 kend=\ET, use=altos7,
5823 #### Hewlett-Packard (hp)
5826 # 8000 Foothills Blvd
5827 # Roseville, CA 95747
5828 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
5829 # 1-(800)-633-3600 (General customer support)
5832 # As of March 1998, HP no longer has any terminals in production.
5833 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
5834 # supported (they still have parts). So are the 2392a and 2394a.
5835 # See the WORKSTATION CONSOLES section for the 700s.
5838 # Generic HP terminal - this should (hopefully) work on any HP terminal.
5839 hpgeneric|hp|hewlett-packard generic terminal,
5840 OTbs, OTpt, am, da, db, mir, xhp,
5841 cols#80, lines#24, lm#0, vt#6,
5842 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5843 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
5844 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
5845 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
5846 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
5849 hp110|hewlett-packard model 110 portable,
5850 lines#16, use=hpgeneric,
5852 hp+pfk+cr|hp function keys with CR,
5853 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
5854 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
5856 hp+pfk-cr|hp function keys w/o CR,
5857 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
5860 # The hp2621s use the same keys for the arrows and function keys,
5861 # but not separate escape sequences. These definitions allow the
5862 # user to use those keys as arrow keys rather than as function
5864 hp+pfk+arrows|hp alternate arrow definitions,
5865 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
5866 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
5867 kll=\Eq\r, kri=\Es\r,
5869 hp+arrows|hp arrow definitions,
5870 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5871 kind=\ES, kll=\EF, kri=\ET,
5873 # Generic stuff from the HP 262x series
5875 hp262x|HP 262x terminals,
5877 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
5878 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5879 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5880 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
5881 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
5882 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
5883 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
5885 # Note: no <home> on HPs since that homes to top of memory, not screen.
5886 # Due to severe 2621 braindamage, the only way to get the arrow keys to
5887 # transmit anything at all is to turn on the function key labels
5888 # with <smkx>, and even then the user has to hold down shift!
5889 # The default 2621 turns off the labels except when it has to to
5890 # enable the function keys. If your installation prefers labels
5891 # on all the time, or off all the time (at the "expense" of the
5892 # function keys), use 2621-nl or 2621-wl.
5894 # Note: there are newer ROMs for 2621's that allow you to set
5895 # strap A so the regular arrow keys xmit \EA, etc, as with the
5896 # 2645. However, even with this strap set, the terminal stops
5897 # xmitting if you reset it, until you unset and reset the strap!
5898 # Since there is no way to set/unset the strap with an escape
5899 # sequence, we don't use it in the default.
5900 # If you like, you can use 2621-ba (brain-damaged arrow keys).
5901 hp2621-ba|2621 w/new rom and strap A set,
5902 rmkx@, smkx@, use=hp+arrows, use=hp2621,
5904 # hp2621 with function labels. Most of the time they are off,
5905 # but inside vi, the function key labels appear. You have to
5906 # hold down shift to get them to xmit.
5907 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
5908 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
5912 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
5913 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
5914 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
5915 use=hp+pfk+cr, use=hpgeneric,
5917 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
5918 hp2621p|hp 2621 with printer,
5919 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
5921 hp2621p-a|hp2621p with fn as arrows,
5922 use=hp+pfk+arrows, use=hp2621p,
5924 # hp2621 with k45 keyboard
5925 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
5926 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5927 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
5929 # 2621 using all 48 lines of memory, only 24 visible at any time.
5930 hp2621-48|48 line 2621,
5932 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
5935 # 2621 with no labels ever. Also prevents vi delays on escape.
5936 hp2621-nl|hp 2621 with no labels,
5937 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
5940 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
5943 hp2621-nt|hp 2621 w/no tabs,
5946 # Hp 2624 B with 4 or 10 pages of memory.
5948 # Some assumptions are made with this entry. These settings are
5949 # NOT set up by the initialization strings.
5951 # Port Configuration
5956 # Terminal Configuration
5962 # Note: the 2624 DOES have a true <home>, believe it or not!
5964 # The 2624 has an "error line" to which messages can be sent.
5965 # This is CLOSE to what is expected for a "status line". However,
5966 # after a message is sent to the "error line", the next carriage
5967 # return is EATEN and the "error line" is turned back off again!
5968 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
5970 # This entry supports emacs (and any other program that uses raw
5971 # mode) at 4800 baud and less. I couldn't get the padding right
5974 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
5975 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
5978 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
5979 use=hp+labels, use=scrhp,
5981 # This hp2626 entry does not use any of the fancy windowing stuff
5984 # Indeed, terminfo does not yet handle such stuff. Since changing
5985 # any window clears memory, it is probably not possible to use
5986 # this for screen opt.
5988 # ed is incredibly slow most of the time - I am guessing at the
5989 # exact padding. Since the terminal uses xoff/xon this is intended
5990 # only for cost computation, so that the terminal will prefer el
5991 # or even dl1 which is probably faster!
5993 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
5994 # extra slow on the last line of the window.
5996 # The padding probably should be changed.
5998 hp2626|hp2626a|hp2626p|hp 2626,
6001 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6002 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
6003 use=hp+labels, use=scrhp,
6005 # This entry is for sysline. It allocates a 23 line window with
6006 # a 115 line workspace for regular use, and a 1 line window for
6009 # This assumes port 2 is being used.
6010 # Turn off horizontal line, Create ws #1 with 115 lines,
6011 # Create ws #2 with 1 line, Create window #1 lines 1-23,
6012 # Create window #2 lines 24-24, Attach cursor to workspace #1.
6013 # Note that this clears the tabs so it must be done by tset before
6016 hp2626-s|hp 2626 using only 23 lines,
6019 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6020 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6021 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6022 # Force terminal back to 24 lines after being 23.
6023 hp2626-ns|hp 2626 using all 24 lines,
6024 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6026 # Various entries useful for small windows on 2626.
6027 hp2626-12|hewlett-packard 2626 12 lines,
6028 lines#12, use=hp2626,
6029 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6030 cols#40, lines#12, use=hp2626,
6031 hp2626-x40|hewlett-packard 2626 40 columns,
6032 cols#40, use=hp2626,
6033 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6034 lines#11, use=hp2626-s,
6037 # hp2627 color tubes from University of Wisconsin
6039 hp2627a-rev|hp 2627 with reverse video colors,
6040 cr=^M, cud1=^J, ht=^I, ind=^J,
6041 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6042 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6043 smul=\E&dD\E&v1S, use=hp2621-nl,
6044 hp2627a|hp 2627 color terminal with no labels,
6045 cr=^M, cud1=^J, ht=^I, ind=^J,
6046 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6047 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6048 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6050 hp2627c|hp 2627 color (cyan) terminal with no labels,
6051 cr=^M, cud1=^J, ht=^I, ind=^J,
6052 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6053 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6055 # hp2640a doesn't have the Y cursor addressing feature, and C is
6056 # memory relative instead of screen relative, as we need.
6059 cup@, rmkx@, smkx@, use=hp2645,
6061 hp2640b|hp2644a|hp 264x series,
6062 rmkx@, smkx@, use=hp2645,
6064 # (hp2641a: removed unknown :gu: -- esr)
6065 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6066 am, da, db, mir, xhp,
6068 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6069 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6070 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6071 if=/usr/share/tabset/std, il1=\EL, ind=^J,
6072 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6073 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6076 # This terminal should be used at 4800 baud or less. It needs padding for
6077 # plain characters at 9600, I guessed at an appropriate cr delay. It really
6078 # wants ^E/^F handshaking, but that doesn't work well even if you write
6079 # software to support it.
6080 hp2645|hp45|HP 2645 series,
6082 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6083 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6084 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6085 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6087 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6088 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6089 # You should use this terminal at 4800 baud or less.
6090 hp2648|hp2648a|HP 2648a graphics terminal,
6091 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6092 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6094 # The HP 150 terminal is a fairly vanilla HP terminal, with the
6095 # clreol standout problem. It also has graphics capabilities and
6096 # a touch screen, which we don't describe here.
6097 hp150|hewlett packard Model 150,
6100 # HP 2382a terminals, "the little ones." They don't have any
6101 # alternate character set support and sending out ^N/^O will
6102 # leave the screen blank.
6103 hp2382a|hp2382|hewlett packard 2382a,
6107 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6109 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6110 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6112 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6113 use=hp+pfk+arrows, use=hp2621-fl,
6115 # newer hewlett packard terminals
6117 newhpkeyboard|generic entry for HP extended keyboard,
6118 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6119 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6120 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6121 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6124 newhp|generic entry for new hewlett packard terminals,
6125 am, bw, mir, xhp, xon,
6126 cols#80, lines#24, pb#4800,
6127 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6128 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6129 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6130 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6131 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6132 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6133 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6134 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6135 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6136 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6137 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6138 tbc=\E3, use=newhpkeyboard,
6140 memhp|memory relative addressing for new HP ttys,
6142 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6143 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6144 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6145 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6147 scrhp|screen relative addressing for new HP ttys,
6148 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6149 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6150 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6151 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6152 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6154 # (hp+labels: added label values from a BRL termcap -- esr)
6155 hp+labels|"standard" label info for new HP ttys,
6157 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6158 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6159 rmln=\E&j@, smln=\E&jB,
6161 hp+printer|"standard" printer info for HP ttys,
6162 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6165 # The new hp2621b is kind of a cross between the old 2621 and the
6166 # new 262x series of machines. It has dip-switched options.
6167 # The firmware has a bug in it such that if you give it a null
6168 # length label, the following character is eaten!
6169 hp2621b|hp 2621b with old style keyboard,
6170 lh#1, lm#48, lw#8, nlab#8,
6171 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6172 kind=\ET, kll=\EF, kri=\ES,
6173 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6174 smln=\E&jB, use=hp2621,
6176 hp2621b-p|hp 2621b with printer,
6177 use=hp+printer, use=hp2621b,
6179 # hp2621b - new 2621b with new extended keyboard
6180 # these are closer to the new 26xx series than the other 2621b
6181 hp2621b-kx|hp 2621b with extended keyboard,
6182 use=newhpkeyboard, use=hp2621b,
6184 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6185 use=hp+printer, use=hp2621b-kx,
6187 # Some assumptions are made in the following entries.
6188 # These settings are NOT set up by the initialization strings.
6190 # Port Configuration
6191 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6193 # Terminal Configuration
6194 # InhHndShk(G)=Yes InhDC2(H)=Yes
6195 # XmitFnctn(A)=No InhEolWrp=No
6198 # Hp 2622a & hp2623a display and graphics terminals
6200 hp2622|hp2622a|hp 2622,
6203 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
6205 # The 2623 is a 2622 with extra graphics hardware.
6206 hp2623|hp2623a|hp 2623,
6209 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6210 use=hp+printer, use=hp2624,
6212 # The hewlett packard B can have an optional extra 6 pages of memory.
6213 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6216 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6217 lm#240, use=hp2624b-p,
6219 # Color manipulations for HP terminals
6220 hp+color|hp with colors,
6222 colors#16, ncv#17, pairs#7,
6223 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6224 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6225 op=\E&v0S, scp=\E&v%p1%dS,
6227 # <is2> sets the screen to be 80 columns wide
6228 hp2397a|hp2397|hewlett packard 2397A color terminal,
6229 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6231 # HP 700/44 Setup parameters:
6232 # Terminal Mode HP-PCterm
6233 # Inhibit Auto Wrap NO
6234 # Status Line Host Writable
6235 # PC Character Set YES
6236 # Twenty-Five Line Mode YES
6237 # XON/XOFF @128 or 64 (sc)
6238 # Keycode Mode NO or YES (sc)
6239 # Backspace Key BS or BS/DEL
6241 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6242 # \E\\? does not turn off keycode mode
6243 # <smsc> sets alternate start/stop; keycode on
6244 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6247 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6248 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6249 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6250 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6251 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6253 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6254 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6255 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6256 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6257 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6258 kpp=\E[5~, rmam=\E[?7l,
6259 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6260 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6261 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6262 smul=\E[4m, xoffc=g, xonc=e,
6264 # (hp2392: copied <rmir> here from hpex -- esr)
6267 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6268 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6269 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6270 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6273 hpsub|hp terminals -- capability subset,
6274 am, da, db, mir, xhp, xon,
6276 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6277 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6278 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6279 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6280 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6281 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6284 # May be used for most 24 x 80 hp terminals,
6285 # but has no padding added, so may allow runover in some terminals at high
6286 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6287 # hp98x5 terminal emulators or hp98x6 consoles.
6288 # Adds xy-cursor addressing, vertical cursor addressing, home,
6289 # last line, and underline capabilities.
6291 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6292 # moved <rmir> here from hpsub -- esr)
6293 hpex|hp extended capabilites,
6294 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6295 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6296 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6298 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6299 hp2|hpex2|hewlett-packard extended capabilities newer version,
6300 am, da, db, mir, xhp,
6301 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6302 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6303 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6304 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6305 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6306 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6307 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6308 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6309 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6310 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6311 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6312 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6313 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6314 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6315 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6316 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6317 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6318 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6321 # From: <ddavis@ic.berkeley.edu>
6322 hp236|hp236 internal terminal emulator,
6325 clear=\EF, cnorm=\EDE, cub1=^H,
6326 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6327 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6328 sgr0=\ECI, smso=\EBI,
6330 # This works on a hp300 console running Utah 4.3 BSD
6331 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6332 hp300h|HP Catseye console,
6333 OTbs, am, da, db, mir, xhp,
6334 cols#128, lines#51, lm#0, xmc#0,
6335 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6336 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6337 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6338 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6339 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6340 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6341 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6343 # From: Greg Couch <gregc@ernie.berkeley.edu>
6344 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6345 OTbs, am, da, db, mir, xhp,
6346 cols#128, it#8, lines#46, lm#0,
6347 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6348 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6349 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6350 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6351 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6352 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6353 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6354 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6355 tbc=\E3, vpa=\E&a%p1%dY,
6356 # HP 9845 desktop computer from BRL
6357 # (hp9845: removed unknown capability :gu: -- esr)
6359 OTbs, am, da, db, eo, mir, xhp,
6361 OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
6362 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
6363 if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
6364 smir=\EQ, smso=\E&dB,
6365 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6366 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6367 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6368 hp98550|hp98550a|HP 9000 Series 300 color console,
6369 OTbs, am, da, db, mir, xhp,
6370 cols#128, it#8, lines#49, lm#0,
6371 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6372 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6373 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6374 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6375 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6376 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6377 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6378 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6379 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6380 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6381 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6382 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6383 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6384 # From: Victor Duchovni <vic@fine.princeton.edu>
6385 # (hp700-wy: removed obsolete ":nl=^J:";
6386 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6387 hp700-wy|HP700/41 emulating wyse30,
6388 OTbs, am, bw, mir, msgr,
6389 cols#80, it#8, lines#24, xmc#1,
6390 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6391 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6392 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6393 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6394 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6395 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6396 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6397 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6398 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6399 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6400 hp70092|hp70092a|hp70092A|HP 700/92,
6402 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6403 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6404 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6405 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6406 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6407 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6408 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6409 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6410 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6411 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6412 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6413 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6414 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6415 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6417 bobcat|sbobcat|HP 9000 model 300 console,
6418 am, da, db, mir, xhp,
6419 cols#128, it#8, lines#47, xmc#0,
6420 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6421 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6422 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6423 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6424 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6425 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6426 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6427 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6428 lines#94, use=gator,
6429 gator|HP 9000 model 237 emulating AAA,
6431 cols#128, it#8, lines#47,
6432 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6433 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6434 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6435 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6436 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6437 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6438 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6439 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6440 gator-52|HP 9000 model 237 emulating VT52,
6441 cols#128, lines#47, use=vt52,
6442 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6443 lines#94, use=gator-52,
6447 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6450 # Honeywell Bull terminal. Its cursor and function keys send single
6451 # control characters and it has standout/underline glitch. Most programs
6452 # do not like these features/bugs. Visual bell is realized by flashing the
6453 # "keyboard locked" LED.
6454 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6456 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6457 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6458 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6459 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6460 dku7003|Honeywell Bull DKU 7003 all features described,
6463 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6464 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6467 #### Lear-Siegler (adm)
6469 # These guys are long since out of the terminals business, but
6470 # in 1995 many current terminals still have an adm type as one of their
6471 # emulations (usually their stupidest, and usually labeled adm3, though
6472 # these `adm3' emulations normally have adm3a+ capabilities).
6474 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6475 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6476 # was being held to ground would trigger a send of the top line on the screen.
6477 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6478 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6479 # for clearing up this point.)
6481 adm1a|adm1|lsi adm1a,
6484 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6485 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6490 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6491 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6492 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6493 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6494 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6498 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6499 # The following ADM-3A switch settings are assumed for normal operation:
6500 # SPACE U/L_DISP CLR_SCRN 24_LINE
6501 # CUR_CTL LC_EN AUTO_NL FDX
6502 # Other switches may be set for operator convenience or communication
6503 # requirements. I recommend
6504 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6506 # Most of these terminals required an option ROM to support lower case display.
6507 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6508 # socket, you may be out of luck.
6510 # (adm3a: some capabilities merged in from BRl entry -- esr)
6514 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6515 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6516 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6520 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6523 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6524 rmso=\EG, smso=\EG, use=adm3a+,
6525 # A lot of terminals other than adm11s use these. Wherever you see
6526 # use=adm+sgr with some of its capabilities disabled, try the
6527 # disabled ones. They may well work but not have been documented or
6528 # expressed in the using entry. We'd like to cook up an <sgr> but the
6529 # <rmacs>/<smacs> sequences of the using entries vary too much.
6530 adm+sgr|adm style highlight capabilities,
6531 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6532 smso=\EG4, smul=\EG8,
6533 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6534 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6535 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
6536 # be ^Z, according to his entry.
6537 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
6538 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
6541 OTkn#8, cols#80, lines#24,
6542 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6543 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6544 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6545 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6546 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6547 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6549 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6550 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6551 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6552 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
6553 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6554 # via BRL. That entry asserted <xmc#1>, but I've left that out because
6555 # neither earlier nor later ADMSs have it -- esr)
6557 # You will need to get into the supervisor setup before you can set
6558 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6559 # see a lot more setup options.
6561 # While in supervisor setup you can also use following codes:
6563 # Ctrl-P Personality character selections (configure for example what
6564 # arrow keys send, if I recall correctly)
6565 # Ctrl-T tabs 1-80 use left&right to move and up to set and
6566 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
6567 # Ctrl-B Binary setup (probably not needed. I think that everything can
6568 # be set using normal setup)
6569 # Ctrl-A Answerback mode (enter answerback message)
6570 # Ctrl-U User friendly mode (normal setup)
6571 # Ctrl-D Defaults entire setup and function keys from EPROM tables
6572 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
6573 # Ctrl-R Reads both setup and functions keys from NVM.
6574 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
6576 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6577 # RTS/CTS used nowadays with virtually every modem and computer. 19200
6578 # bps works fine with hardware flow control.
6580 # The following null-modem cable should fix this and enable you to use
6581 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6582 # set ADM-12+ for DTR handshaking from supervisor setup.
6595 OTbs, OTpt, am, mir,
6596 OTug#1, cols#80, it#8, lines#24,
6597 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6598 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6599 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
6600 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
6601 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6602 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6603 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
6605 # (adm20: removed obsolete ":kn#7:" -- esr)
6606 adm20|lear siegler adm20,
6608 cols#80, it#8, lines#24,
6609 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
6610 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
6611 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
6612 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
6614 adm21|lear siegler adm21,
6616 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
6617 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
6618 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6620 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
6621 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
6622 # removed bogus-looking \200 from before <cup>. -- esr)
6626 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6627 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6628 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
6629 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
6630 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6631 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6632 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
6633 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
6634 # ADM 31 DIP Switches
6636 # This information comes from two versions of the manual for the
6637 # Lear-Siegler ADM 31.
6641 # +-||||-------------------------------------+
6656 # +----------------------------------------------+
6657 # front of case (keyboard)
6659 # S1 - Data Rate - Modem
6660 # S2 - Data Rate - Printer
6661 # ------------------------
6663 # -------------------
6681 # S3 - Interface/Printer/Attributes
6682 # ---------------------------------
6683 # Printer Busy Control
6686 # off off off Busy not active, CD disabled
6687 # off off on Busy not active, CD enabled
6688 # off on off Busy active on J5-20, CD disabled
6689 # on off off Busy active on J5-19, CD disabled - Factory Set.
6690 # on off on Busy active on J5-19, CD enabled
6692 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
6694 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
6696 # sw6 ON enables printer BUSY active LOW - Factory Setting
6697 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
6699 # sw7 ON - steady cursor - Factory Setting
6700 # OFF - blinking cursor
6702 # sw8 ON causes selected attribute character to be displayed
6703 # OFF causes SPACE to be displayed instead - Factory Setting
6709 # sw4 sw1 sw2 sw3 sw4
6710 # ---------------------------
6711 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
6712 # Current Loop disabled - Factory Setting
6713 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
6715 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
6716 # Current Loop Disabled
6718 # sw5 ON disables dot stretching mode - Factory Setting
6719 # OFF enables dot stretching mode
6720 # sw6 ON enables blanking function
6721 # OFF enables underline function - Factory Setting
6722 # sw7 ON causes NULLS to be displayed as NULLS
6723 # OFF causes NULLS to be displayed as SPACES - Factory Setting
6725 # S5 - Word Structure
6726 # -------------------
6727 # sw1 ON enables BREAK key - Factory Setting
6728 # OFF disables BREAK key
6729 # sw2 ON selects 50Hz monitor refresh rate
6730 # OFF selects 60Hz monitor refresh rate - Factory Setting
6732 # Modem Port Selection
6735 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
6736 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
6737 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
6738 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
6739 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
6740 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
6741 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
6742 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
6744 # sw6 ON sends bit 8 a 1 (mark)
6745 # OFF sends bit 8 as 0 (space) - Factory Setting
6746 # sw7 ON selects Block Mode
6747 # OFF selects Conversation Mode - Factory Setting
6748 # sw8 ON selects Full Duplex operation
6749 # OFF selects Half Duplex operation - Factory Setting
6753 # sw1, sw2, sw6, sw7 Reserved - Factory 0
6755 # Printer Port Selection
6756 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
6758 # sw8 ON enables Printer Port
6759 # OFF disables Printer Port - Factory Setting
6761 # S7 - Polling Address
6762 # --------------------
6763 # sw1-7 Establish ASCII character which designates terminal polling address
6765 # OFF = logic 1 - Factory Setting
6766 # sw8 ON enables Polling Option
6767 # OFF disables Polling Option - Factory Setting
6770 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
6772 # This adm31 entry uses underline as the standout mode.
6773 # If the adm31 gives you trouble with standout mode, check the DIP switch in
6774 # position 6, bank @c11, 25% from back end of the circuit board. Should be
6775 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
6776 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
6777 adm31|lsi adm31 with sw6 set for underline mode,
6780 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6781 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6782 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
6783 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6784 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6785 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
6786 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
6787 adm31-old|o31|old adm31,
6788 rmul@, smso=\EG4, smul@, use=adm31,
6789 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
6793 if=/usr/share/tabset/vt100,
6794 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
6796 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
6800 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6801 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6802 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
6803 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
6804 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
6805 smir=\Eq, smul@, use=adm+sgr,
6806 # The following termcap for the Lear Siegler ADM-42 leaves the
6807 # "system line" at the bottom of the screen blank (for those who
6808 # find it distracting otherwise)
6809 adm42-ns|lsi adm-42 with no system line,
6810 cbt=\EI\EF \011, clear=\E;\EF \011,
6811 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
6812 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
6813 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
6814 smir=\Eq\EF \011, use=adm42,
6815 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
6816 # The insert mode of this terminal is commented out because it's broken for our
6817 # purposes in that it will shift the position of every character on the page,
6818 # not just the cursor line!
6819 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
6820 adm1178|1178|lsi adm1178,
6822 cols#80, lines#24, xmc#1,
6823 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
6824 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6825 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
6826 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
6827 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
6828 sgr0=\E), smso=\EG4, smul=\EG1,
6832 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
6833 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
6834 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
6836 # ComputerVision Services
6837 # 500 Old Connecticut Path
6841 # Standout mode is dim reverse-video.
6842 pt100|pt200|wren|fenix|prime pt100/pt200,
6844 cols#80, it#8, lines#24,
6845 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
6846 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
6847 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
6848 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
6849 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
6850 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
6851 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
6852 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
6854 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
6855 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
6856 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
6858 cup=\E[%i%p1%d;%p2%dH, use=pt100,
6860 rmso@, smso@, use=pt100,
6861 pt250w|Prime PT250 in 132-column mode,
6862 rmso@, smso@, use=pt100w,
6867 # 3475-A North 1st Street
6869 # Vox: (800)-457-4447
6870 # Fax: (408)-473-1510
6871 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
6873 # Qume was bought by Wyse, but still (as of early 1995) has its own support
6874 # group and production division.
6876 # Discontinued Qume models:
6878 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
6879 # built to replace them, and a qvt119+ which was a 101+ with available wide
6880 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
6881 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
6882 # ANSI-compatible terminals with the qvt323 and qvt61.
6884 # Current Qume models (as of February 1995):
6886 # All current Qume terminals have ANSI-compatible operation modes.
6887 # Qume is still producing the qvt62, which features emulations for other
6888 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
6889 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
6890 # with many emulations including Wyse370, Wyse 325, etc. Their newest
6891 # model is the qvt520, which is vt420-compatible.
6893 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
6895 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
6896 # setup mode. Shift-s should be a configuration save to NVRAM.
6898 qvt101|qvt108|qume qvt 101 and QVT 108,
6901 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
6902 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
6903 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
6904 # What seems to be going on here is that this entry was designed so that
6905 # the normal highlight is bold and standout is dim plus something else
6906 # (reverse-video maybe? But then, are there two <rev> sequences?)
6907 qvt101+|qvt101p|qume qvt 101 PLUS product,
6909 cols#80, lines#24, xmc#0,
6910 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
6911 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6912 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
6913 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
6914 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
6915 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
6916 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
6917 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
6918 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
6919 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6920 qvt102|qume qvt 102,
6921 cnorm=\E., use=qvt101,
6922 # (qvt103: added <rmam>/<smam> based on init string -- esr)
6923 qvt103|qume qvt 103,
6925 cols#80, it#8, lines#24, vt#3,
6926 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
6927 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
6928 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6929 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
6930 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
6931 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
6932 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6933 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
6934 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
6935 rmso=\E[m$<2>, rmul=\E[m$<2>,
6936 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6937 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
6938 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
6939 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
6940 qvt103-w|qume qvt103 132 cols,
6942 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
6943 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
6945 cols#80, lines#24, xmc#0,
6946 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
6947 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6948 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
6949 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
6950 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
6951 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
6952 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
6953 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6954 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
6955 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6956 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
6957 lines#25, use=qvt119+,
6958 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
6960 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
6961 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
6962 lines#25, use=qvt119+,
6963 qvt203|qvt203+|qume qvt 203 Plus,
6964 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
6965 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
6966 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
6967 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
6968 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
6970 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
6972 # Since a command is present for enabling 25 data lines,
6973 # a specific terminfo entry may be generated for the 203.
6974 # If one is desired for the QVT 119 PLUS then 25 lines must
6975 # be selected in the status line (setup line 9).
6977 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
6979 is2=\E[=40h\E[?3l, use=qvt203,
6980 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
6982 rs2=\E[?3h\E[=40h, use=qvt203,
6984 #### Televideo (tvi)
6987 # 550 East Brokaw Road
6988 # PO Box 49048 95161
6990 # Vox: (408)-954-8333
6991 # Fax: (408)-954-0623
6994 # These require incredible amounts of padding.
6996 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
6997 # Televideo terminals are ANSI and PC-ANSI compatible.
6999 tvi803|televideo 803,
7000 clear=\E*$<10>, use=tvi950,
7002 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7003 # Switch settings are:
7024 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
7040 # U do CR/LF when CR received
7041 # D do CR when CR received
7063 # S2 6 Cursor down key
7067 # S2 7 Screen colour
7071 # S2 8 DSR status (pin 6)
7075 # S2 9 DCD status (pin 8)
7079 # S2 10 DTR status (pin 20)
7082 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7083 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7084 tvi910|televideo model 910,
7086 cols#80, it#8, lines#24, xmc#1,
7087 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7088 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7089 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7090 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7091 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7092 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7093 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7094 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7095 # From: Alan R. Rogers <rogers%albany@csnet-relay>
7096 # as subsequently hacked over by someone at SCO
7097 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7099 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7102 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
7103 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
7104 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
7105 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
7108 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
7109 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
7110 # D U D D 8O1 D U U U 8E2
7112 # S1 9 Autowrap (U = on, D = off)
7113 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7114 # S2 1 Mode (U = block, D = conversational)
7115 # S2 2 Duplex (U = half, D = full)
7116 # S2 3 Hertz (U = 50, D = 60)
7117 # S2 4 Edit mode (U = local, D = duplex)
7118 # S2 5 Cursor type (U = underline, D = block)
7119 # S2 6 Cursor down key (U = send ^J, D = send ^V)
7120 # S2 7 Screen colour (U = green on black, D = black on green)
7121 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
7122 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
7123 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7125 tvi910+|televideo 910+,
7126 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7127 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7128 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7129 ll=\E=7\s, use=tvi910,
7131 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
7132 # <khome> from BRL entry -- esr)
7133 tvi912|tvi914|tvi920|old televideo 912/914/920,
7134 OTbs, OTpt, am, msgr,
7135 cols#80, it#8, lines#24, xmc#1,
7136 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7137 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7138 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7139 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7140 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7141 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7142 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7143 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7145 # We got some new tvi912c terminals that act really weird on the regular
7146 # termcap, so one of our gurus worked this up. Seems that cursor
7147 # addressing is broken.
7148 tvi912cc|tvi912 at cowell college,
7151 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7152 # From: Benjamin C. W. Sittler
7154 # Someone has put a scanned copy of the manual online at:
7155 # http://vt100.net/televideo/912b-om/
7157 # These terminals were produced ca. 1979, and had a 12" monochrome
7158 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7159 # ASCII, and were generally similar to adm3a but with attributes
7160 # (including some with magic cookies), fancy half-duplex mode, and
7163 # Some operations reqire truly incredible amounts of padding. The
7164 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7165 # are so slow as to be nearly unusable.
7167 # There may or may not have been a separate, earlier series of 912/920
7168 # terminals (without the "B" and "C" suffix); I have never seen one,
7169 # and the manual only describes the "B" and "C" series. The 912 and 920
7170 # are quite distinct from the 914 and 924, which were much nicer non-
7171 # magic-cookie terminals similar to the 950.
7173 # This is a new description for the following TeleVideo terminals,
7174 # distinguished chiefly by their keyboards:
7176 # TVI-912B - very odd layout, no function keys (84 keys)
7177 # TVI-920B - typewriter layout, no function keys (103 keys)
7178 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7179 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7181 # To choose a setting for the TERM variable, start with the model:
7183 # Model || base name
7184 # ----------||-----------
7185 # TVI-912B || tvi912b
7186 # TVI-912C || tvi912c
7187 # TVI-920B || tvi920b
7188 # TVI-920C || tvi920c
7190 # Then add a suffix from the following table describing installed options
7191 # and how you'd like to use the terminal:
7193 # Use Video | Second | Visual | Magic | Page || feature
7194 # Attributes | Page | Bell | Cookies | Print || suffix
7195 # ------------|--------|--------|---------|-------||---------
7196 # No | No | N/A | N/A | No || -unk
7197 # No | No | N/A | N/A | Yes || -p
7198 # No | Yes | No | N/A | No || -2p-unk
7199 # No | Yes | No | N/A | Yes || -2p-p
7200 # No | Yes | Yes | N/A | No || -vb-unk
7201 # No | Yes | Yes | N/A | Yes || -vb-p
7202 # Yes | No | N/A | No | N/A ||
7203 # Yes | No | N/A | Yes | N/A || -mc
7204 # Yes | Yes | No | No | N/A || -2p
7205 # Yes | Yes | No | Yes | N/A || -2p-mc
7206 # Yes | Yes | Yes | No | N/A || -vb
7207 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7209 # So e.g. a model 920 C with second page memory option, visual bell
7210 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7211 # second page memory option and using magic cookies would be
7216 # At 9600 baud, the terminal is prone to overflow its input buffer
7217 # during complex operations (insert/delete
7218 # character/line/screen/page), and it does not signal this over the
7219 # RS232 cable. The typical symptom of an overrun is that the terminal
7220 # starts beeping, and output becomes garbled.
7222 # The padding delays in this terminfo were derived using tack(1)
7223 # running on a Linux box connected to a TVI-920C with a later-model
7224 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7225 # vary. The numbers below seem to give the terminal enough time so
7226 # that it doesn't overflow its input buffer and start losing
7231 # If you want to use the FUNCT key on a tvi912[bc], use the
7232 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7233 # the following table (these also work on the 920 series):
7235 # Unshifted Function Keys:
7237 # Key | capname|| Equivalent
7238 # -----|--------||------------
7239 # F1 | <kf1> || FUNCT + @
7240 # F2 | <kf2> || FUNCT + A
7241 # F3 | <kf3> || FUNCT + B
7242 # F4 | <kf4> || FUNCT + C
7243 # F5 | <kf5> || FUNCT + D
7244 # F6 | <kf6> || FUNCT + E
7245 # F7 | <kf7> || FUNCT + F
7246 # F8 | <kf8> || FUNCT + G
7247 # F9 | <kf9> || FUNCT + H
7248 # F10 | <kf10> || FUNCT + I
7249 # F11 | <kf11> || FUNCT + J
7251 # Shifted Function Keys:
7253 # SHIFT + Key | capname|| Equivalent
7254 # -------------|--------||------------
7255 # SHIFT + F1 | <kf12> || FUNCT + `
7256 # SHIFT + F2 | <kf13> || FUNCT + a
7257 # SHIFT + F3 | <kf14> || FUNCT + b
7258 # SHIFT + F4 | <kf15> || FUNCT + c
7259 # SHIFT + F5 | <kf16> || FUNCT + d
7260 # SHIFT + F6 | <kf17> || FUNCT + e
7261 # SHIFT + F7 | <kf18> || FUNCT + f
7262 # SHIFT + F8 | <kf19> || FUNCT + g
7263 # SHIFT + F9 | <kf20> || FUNCT + h
7264 # SHIFT + F10 | <kf21> || FUNCT + i
7265 # SHIFT + F11 | <kf22> || FUNCT + j
7267 # PORTS AND SWITCH SETTINGS
7269 # Here are the switch settings for the TVI-912B/TVI-920B and
7270 # TVI-912C/TVI-920C:
7272 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7273 # 2: 9600 3: 4800 4: 2400 5: 1200
7274 # 6: 600 7: 300 8: 150 9: 75
7277 # S2 UART/Terminal options:
7279 # 1: Not used Not allowed
7280 # 2: Alternate character set Standard character set
7281 # 3: Full duplex Half duplex
7282 # 4: 50 Hz refresh 60 Hz refresh
7283 # 5: No parity Send parity
7284 # 6: 2 stop bits 1 stop bit
7285 # 7: 8 data bits 7 data bits
7286 # 8: Not used Not allowed on Rev E or lower
7287 # 9: Even parity Odd parity
7288 # 10: Steady cursor Blinking cursor
7289 # (On Rev E or lower, use W25 instead of switch 10.)
7291 # S5 UART/Terminal options:
7293 # 1: P3-6 Not connected DSR received on P3-6
7294 # 2: P3-8 Not connected DCD received on P3-8
7296 # 3 Open, 4 Open: P3-20 Not connected
7297 # 3 Open, 4 Closed: DTR on when terminal is on
7298 # 3 Closed, 4 Open: DTR is connected to RTS
7299 # 3 Closed, 4 Closed: Not allowed
7301 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7302 # all data transmitted out of the modem port (P3) will also be
7303 # transmitted out of the printer port (P4).
7305 # 6 Open, 7 Open: Not allowed
7306 # 6 Open, 7 Closed: 20ma current loop input
7307 # 6 Closed, 7 Open: RS232 input
7308 # 6 Closed, 7 Closed: Not allowed
7311 # If the jumper is installed, the effect will occur (the next time the terminal
7314 # S4/W31: Enables automatic LF upon receipt of CR from
7315 # remote or keyboard.
7316 # S4/W32: Enables transmission of EOT at the end of Send. If not
7317 # installed, a carriage return is sent.
7318 # S4/W33: Disables automatic carriage return in column 80.
7319 # S4/W34: Selects Page Print Mode as initial condition. If not
7320 # installed, Extension Mode is selected.
7322 # NON-STANDARD CAPABILITIES
7324 # Sending <u9> or <u7> returns a cursor position report in the format
7325 # YX\r, where Y and X are as in <cup>. This format is described in
7326 # <u8> and <u6>, but it's not clear how one should write an
7327 # appropriate scanf string, since we need to subtract %' ' from the
7328 # character after reading it. The <u9> capability is used by tack(1)
7329 # to synchronize during padding tests, and seems to work for that
7332 # This description also includes the obsolete termcap capabilities
7333 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7335 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7337 # The FUNCT modifier actually works with every normal key by sending
7338 # ^AX\r, where X is the sequence normally sent by that key. This is a
7339 # sort of meta key not currently describable in terminfo.
7341 # There are quite a few other keys (especially on the 920 models,) but
7342 # they are for the most part only useful in block mode.
7344 # These terminals have lots of forms manipulation features, mainly
7345 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7346 # spaces"; nulls are sentinels for "send X" operations); "send X"
7347 # operations for uploading all or part of the screen; and block-mode
7348 # editing keys (they don't send escape sequences, but manipulate video
7349 # memory directly). Block mode is used for local editing, and protect
7350 # mode (in conjunction with the "write protect" attribute,
7351 # a.k.a. half-intensity outside of protect mode) is used to control
7352 # which parts of the screen are edited/sent/printed (by <mc0>).
7354 # There are at least two major families of ROM, "early" and
7355 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7356 # support a few extra escape sequences for manipulating the off-screen
7357 # memory page, and for sending whole pages back to the host (mainly
7358 # useful in block mode.) The descriptions in this file don't use any
7359 # of those sequences: set cursor position including page (\E-PYX,
7360 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7361 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7362 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7363 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7364 # are as in <cup>, and some "send page" features mainly useful for
7365 # forms manipulation.
7367 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7368 # except that a terminal reset (<is2>) enables the keyboard.
7370 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7371 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7375 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7376 # sequences (I infer that in some TeleVideo terminal they may invert
7377 # and uninvert the display) so the <flash> sequence given here is a
7378 # cheesy page-flip instead.
7380 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7381 # tack(1), so it is not included in the descriptions below.
7383 # It's not clear whether auto_left_margin (<bw>) flag should be set
7384 # for these terminals; tack says yes, so it is set here, but this
7385 # differs from other descriptions I've seen.
7387 # Extension print mode (<mc5>) echoes all characters to the printer
7388 # port [in addition to displaying them] except for the page print mode
7389 # sequence (<mc4>); this is a slight violation of the terminfo
7390 # definition for <mc5> but I don't expect it to cause problems. We
7391 # reset to page print mode in <rs1> since it may have been enabled
7394 # The descriptions with plus signs (+) are building blocks.
7396 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7398 cols#80, it#8, lines#24,
7399 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7400 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7401 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7402 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7403 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7404 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7405 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7406 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7407 u7=\E?, u8=%c%c\r, u9=\E?,
7409 # This isn't included in the basic capabilities because it is
7410 # typically unusable in combination with the full range of video
7411 # attributes, since the magic cookie attributes turn into ASCII
7412 # control characters, and the half-intensity ("protected") attribute
7413 # converts all affected characters to spaces.
7415 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7418 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7419 # exposes no other attributes (half-intensity is the only attribute
7420 # that does not generate a magic cookie.)
7422 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7424 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7427 # Full magic-cookie attribute support, with half-intensity reverse
7428 # video for standout. Note that we add a space in the <dim> sequence
7429 # to give a consistent magic-cookie count. Also note that <sgr> uses
7430 # backspacing (in the TVI-supported order) to apply all requested
7431 # attributes with only a single magic cookie.
7433 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7435 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7437 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7438 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7440 # This uses the second page memory option to save & restore screen
7441 # contents. If your terminal is missing the option, this description
7442 # should still work, but that has not been tested.
7444 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7445 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7446 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7448 # This simulates flashing by briefly toggling to the other page
7451 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7452 bel=\EK$<100>\EK, use=tvi912b+2p,
7454 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7456 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7457 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7458 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7459 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7460 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7461 kf8=^AG\r, kf9=^AH\r,
7463 # Combinations of the basic building blocks
7465 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7466 use=tvi912b+2p, use=tvi912b-unk,
7468 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7469 use=tvi912b+vb, use=tvi912b-unk,
7471 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7472 use=tvi912b+printer, use=tvi912b-unk,
7474 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7475 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7477 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7478 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7480 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7481 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7483 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7484 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7486 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7487 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7489 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7490 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7492 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7493 use=tvi912b+dim, use=tvi912b-unk,
7495 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7496 use=tvi912b+mc, use=tvi912b-unk,
7498 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7499 use=tvi920b+fn, use=tvi912b-unk,
7501 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7502 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7504 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7505 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7507 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7508 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7510 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7511 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7514 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7515 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7518 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7519 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7522 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7523 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7526 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7527 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7530 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7531 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7534 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7535 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7537 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7538 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7540 # Televideo 921 and variants
7541 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7542 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7543 # also added empty <acsc> to suppress tic warning -- esr)
7544 tvi921|televideo model 921 with sysline same as page & real vi function,
7545 OTbs, OTpt, am, hs, xenl, xhp,
7546 cols#80, lines#24, xmc#0,
7547 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7548 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7549 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7550 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7551 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7552 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7553 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7554 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7555 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7556 # without the beeper
7557 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7558 # also added empty <acsc> to suppress tic warning -- esr)
7559 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7561 cols#80, lines#24, xmc#0,
7562 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7563 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7564 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7565 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
7566 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7567 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
7568 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
7569 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
7570 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7571 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
7572 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
7573 dl1=\ER$<2*/>, il1=\EE$<2*/>,
7574 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
7575 kil1=\EE$<2*/>, use=tvi92B,
7577 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
7578 # in from a BSD termcap file because it looks like they do something the
7579 # old ones skip -- esr)
7580 tvi924|televideo tvi924,
7581 am, bw, hs, in, mir, msgr, xenl, xon,
7582 cols#80, it#8, lines#24, wsl#80, xmc#0,
7583 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
7584 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
7585 cub1=^H, cud1=^V, cuf1=^L,
7586 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
7587 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
7588 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
7589 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7590 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
7591 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7592 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
7593 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
7594 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
7595 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
7596 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
7597 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
7598 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
7601 # TVI925 DIP switches. In each of these, D = Down and U = Up,
7603 # Here are the settings for the external (baud) switches (S1):
7606 # 7 8 9 10 [Printer]
7607 # 1 2 3 4 [Main RS232]
7608 # -----------------------------------------------------
7627 # Settings for word length and stop-bits (S1)
7629 # Position Description
7631 # ---------------------------
7638 # S2 (external) settings
7640 # Position Up Dn Description
7641 # --------------------------------------------
7643 # X Duplex edit (transmit editing keys)
7644 # --------------------------------------------
7645 # 2 X 912/920 emulation
7647 # --------------------------------------------
7651 # --------------------------------------------
7655 # --------------------------------------------
7659 # --------------------------------------------
7663 # --------------------------------------------
7667 # --------------------------------------------
7668 # 6 X White on black display
7669 # X Black on white display
7670 # --------------------------------------------
7673 # --------------------------------------------
7676 # --------------------------------------------
7679 # --------------------------------------------
7682 # --------------------------------------------
7683 # 10 X CR/LF (Auto LF)
7686 # S3 (internal switch) settings:
7688 # Position Up Dn Description
7689 # --------------------------------------------
7692 # --------------------------------------------
7695 # --------------------------------------------
7698 # --------------------------------------------
7701 # --------------------------------------------
7704 # --------------------------------------------
7705 # 4 X Blinking block cursor
7707 # --------------------------------------------
7708 # 4 X Blinking underline cursor
7710 # --------------------------------------------
7711 # 4 X Steady block cursor
7713 # --------------------------------------------
7714 # 4 X Steady underline cursor
7716 # --------------------------------------------
7717 # 6 X Screen blanking timer (ON)
7718 # X Screen blanking timer (OFF)
7719 # --------------------------------------------
7720 # 7 X Page attributes
7722 # --------------------------------------------
7723 # 8 X DCD disconnected
7725 # --------------------------------------------
7726 # 9 X DSR disconnected
7728 # --------------------------------------------
7729 # 10 X DTR Disconnected
7731 # --------------------------------------------
7733 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
7734 tvi925|televideo 925,
7735 OTbs, am, bw, hs, ul,
7736 cols#80, lines#24, xmc#1,
7737 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
7738 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7739 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
7740 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
7741 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
7742 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
7743 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7744 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7745 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
7746 tsl=\Eh\Ef, use=adm+sgr,
7747 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
7748 # to avoid "magic cookie" standout glitch:
7749 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
7751 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
7753 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
7754 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
7755 # for additional capabilities,
7756 # The following tvi descriptions from B:pjphar and virus!mike
7757 # is for all 950s. It sets the following attributes:
7758 # full duplex (\EDF) write protect off (\E()
7759 # conversation mode (\EC) graphics mode off (\E%)
7760 # white on black (\Ed) auto page flip off (\Ew)
7761 # turn off status line (\Eg) clear status line (\Ef\r)
7762 # normal video (\E0) monitor mode off (\EX or \Eu)
7763 # edit mode (\Er) load blank char to space (\Ee\040)
7764 # line edit mode (\EO) enable buffer control (^O)
7765 # protect mode off (\E\047) duplex edit keys (\El)
7766 # program unshifted send key to send line all (\E016)
7767 # program shifted send key to send line unprotected (\E004)
7768 # set the following to nulls:
7769 # field delimiter (\Ex0\200\200)
7770 # line delimiter (\Ex1\200\200)
7771 # start-protected field delimiter (\Ex2\200\200)
7772 # end-protected field delimiter (\Ex3\200\200)
7773 # set end of text delimiter to carriage return/null (\Ex4\r\200)
7775 # TVI 950 Switch Setting Reference Charts
7779 # S1 1 2 3 4 5 6 7 8 9 10
7780 # +-----------------------+-----+-----+-----------------------+
7781 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
7783 # +------+-----------------------+-----+-----+-----------------------+
7784 # | Up | See | 7 | 2 | See |
7785 # +------+-----------------------+-----+-----+-----------------------+
7786 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
7787 # +------+-----------------------+-----+-----+-----------------------+
7790 # S2 1 2 3 4 5 6 7 8 9 10
7791 # +-----+-----+-----------------+-----+-----------+-----+-----+
7792 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
7793 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7794 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
7795 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7796 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
7797 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7801 # +-----------+-----+-----+-----+-----+-----------+
7802 # | Display | 1 | 2 | 3 | 4 | Baud |
7803 # +-----------+-----+-----+-----+-----+ |
7804 # | Printer | 7 | 8 | 9 | 10 | Rate |
7805 # +-----------+-----+-----+-----+-----+-----------+
7806 # | D | D | D | D | 9600 |
7807 # | U | D | D | D | 50 |
7808 # | D | U | D | D | 75 |
7809 # | U | U | D | D | 110 |
7810 # | D | D | U | D | 135 |
7811 # | U | D | U | D | 150 |
7812 # | D | U | U | D | 300 |
7813 # | U | U | U | D | 600 |
7814 # | D | D | D | U | 1200 |
7815 # | U | D | D | U | 1800 |
7816 # | D | U | D | U | 2400 |
7817 # | U | U | D | U | 3600 |
7818 # | D | D | U | U | 4800 |
7819 # | U | D | U | U | 7200 |
7820 # | D | U | U | U | 9600 |
7821 # | U | U | U | U | 19200 |
7822 # +-----+-----+-----+-----+-----------+
7825 # +-----+-----+-----+-----------+
7826 # | 3 | 4 | 5 | Parity |
7827 # +-----+-----+-----+-----------+
7828 # | X | X | D | None |
7829 # | D | D | U | Odd |
7830 # | D | U | U | Even |
7831 # | U | D | U | Mark |
7832 # | U | U | U | Space |
7833 # +-----+-----+-----+-----------+
7837 # +-----+-----+-----------------+
7838 # | 7 | 8 | Communication |
7839 # +-----+-----+-----------------+
7840 # | D | D | Half Duplex |
7841 # | D | U | Full Duplex |
7844 # +-----+-----+-----------------+
7846 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
7847 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
7848 # should be present and all tvi native modes use the same string for this.
7849 # Finally, note that BSD has cud1=^V. -- esr)
7850 tvi950|televideo 950,
7851 OTbs, am, hs, mir, msgr, xenl, xon,
7852 cols#80, it#8, lines#24, xmc#1,
7853 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
7854 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7855 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7856 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
7857 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
7859 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
7860 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
7861 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
7862 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7863 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7864 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
7865 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
7868 # is for 950 with two pages adds the following:
7869 # set 48 line page (\E\\2)
7870 # place cursor at page 0, line 24, column 1 (\E-07 )
7871 # set local (no send) edit keys (\Ek)
7873 # two page 950 adds the following:
7874 # when entering ex, set 24 line page (\E\\1)
7875 # when exiting ex, reset 48 line page (\E\\2)
7876 # place cursor at 0,24,1 (\E-07 )
7877 # set duplex (send) edit keys (\El) when entering vi
7878 # set local (no send) edit keys (\Ek) when exiting vi
7880 tvi950-2p|televideo950 w/2 pages,
7881 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
7882 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7883 smkx=\El, use=tvi950,
7885 # is for 950 with four pages adds the following:
7886 # set 96 line page (\E\\3)
7887 # place cursor at page 0, line 24, column 1 (\E-07 )
7889 # four page 950 adds the following:
7890 # when entering ex, set 24 line page (\E\\1)
7891 # when exiting ex, reset 96 line page (\E\\3)
7892 # place cursor at 0,24,1 (\E-07 )
7894 tvi950-4p|televideo950 w/4 pages,
7895 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
7896 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7897 smkx=\El, use=tvi950,
7899 # <is2> for reverse video 950 changes the following:
7900 # set reverse video (\Ed)
7902 # set vb accordingly (\Ed ...delay... \Eb)
7904 tvi950-rv|televideo950 rev video,
7905 flash=\Ed$<200/>\Eb,
7906 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
7909 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
7910 tvi950-rv-2p|televideo950 rev video w/2 pages,
7911 flash=\Ed$<200/>\Eb,
7912 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
7913 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7914 smkx=\El, use=tvi950,
7916 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
7917 tvi950-rv-4p|televideo950 rev video w/4 pages,
7918 flash=\Ed$<200/>\Eb,
7919 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
7920 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7921 smkx=\El, use=tvi950,
7922 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
7923 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
7924 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
7925 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
7926 # the :ko: string had :cl: in it, which means that one of the original
7927 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
7928 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
7929 # ko implies -- esr)
7930 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
7932 tvi955|televideo 955,
7935 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
7936 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
7937 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
7938 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
7939 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
7940 rmam=\E[=7l, rmxon=^N,
7941 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
7942 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
7944 tvi955-w|955-w|televideo955 w/132 cols,
7946 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
7947 # use half-intensity as normal mode, full intensity as <bold>
7948 tvi955-hb|955-hb|televideo955 half-bright,
7949 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
7950 sgr0=\EG0\E[=5h, use=tvi955,
7951 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
7952 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
7953 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
7954 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
7955 # it does to the function keys. I deduced <rmam>/<smam>.
7956 # also added empty <acsc> to suppress tic warning, -- esr)
7957 tvi970|televideo 970,
7958 OTbs, OTpt, am, da, db, mir, msgr,
7959 cols#80, it#8, lines#24,
7960 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
7961 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
7962 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
7963 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
7964 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
7965 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
7966 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7967 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
7968 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
7969 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7970 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
7971 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
7972 smul=\E[4m, vpa=\E[%i%p1%dd,
7973 tvi970-vb|televideo 970 with visual bell,
7974 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7976 tvi970-2p|televideo 970 with using 2 pages of memory,
7977 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
7979 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
7980 # per line (rather than 40), Esc K chooses the normal character set. Not sure
7981 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
7982 # <smul> strings are klutzy, but at least use no screen space.
7983 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
7984 # its absence means <smam>=\Ev isn't safe to use. -- esr)
7985 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
7986 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
7987 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
7988 tvipt|televideo personal terminal,
7991 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
7992 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
7993 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
7994 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
7995 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
7996 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
7997 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
7998 tvi9065|televideo 9065,
7999 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8000 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8002 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8003 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8004 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8005 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8006 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8007 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8008 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8009 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8010 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8011 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8013 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8014 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8015 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8016 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8017 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8018 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8019 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8020 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8021 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8022 pfx=\E|%p1%{48}%+%c1%p2%s\031,
8023 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8024 rep=\E[%p2%db%p1%c, rev=\EG4,
8025 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8026 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8027 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8028 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8029 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8030 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8031 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
8032 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8033 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8034 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8038 # In September 1993, Visual Technology of Westboro, Massachusetts,
8039 # merged with White Pine Software of Nashua, New Hampshire.
8041 # White Pine Software may be contacted at +1 603/886-9050.
8042 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8045 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8046 # Recently I hacked together the following termcap for Visual
8047 # Technology's Visual 50 terminal. It's a slight modification of
8049 # It's intended to run when the Visual 50 is in vt52 emulation mode
8050 # (I know what you're thinking; if it's emulating a vt52, then why
8051 # another termcap? Well, it turns out that the Visual 50 can handle
8052 # <dl1> and db(?) among other things, which the vt52 can't)
8053 # The termcap works OK for the most part. The only problem is on
8054 # character inserts. The whole line gets painfully redrawn for each
8055 # character typed. Any suggestions?
8056 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
8057 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
8058 # disguise; <kf7>-<kf9> are really l1-l3.
8060 OTbs, OTpt, am, da, db, msgr,
8061 cols#80, it#8, lines#24,
8062 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8063 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8064 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8065 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8066 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8067 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8068 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8069 # this one was BSD & SCO's vi50
8070 vi50adm|visual 50 in adm3a mode,
8072 cols#80, it#8, lines#24,
8073 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8074 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8075 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8076 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8078 # From: Jeff Siegal <jbs@quiotix.com>
8080 OTbs, am, mir, msgr,
8081 cols#80, it#8, lines#24,
8082 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8083 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8084 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8085 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8086 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8089 # Visual 200 from BRL
8090 # The following switch settings are assumed for normal operation:
8091 # FULL_DUPLEX SCROLL CR
8092 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
8093 # Other switches may be set for operator convenience or communication
8095 # Character insertion is kludged in order to get around the "beep" misfeature.
8096 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8097 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8098 # and <dl1> strings, but we seem to get along fine without them.
8100 OTbs, OTpt, am, mir, msgr,
8101 OTkn#10, cols#80, it#8, lines#24,
8102 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8103 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8104 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8105 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8106 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8107 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8108 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8109 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8110 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8111 rmacs=\EG, rmkx=\E>, rmso=\E3,
8112 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8113 smkx=\E=, smso=\E4, tbc=\Eg,
8114 # The older Visuals didn't come with function keys. This entry uses
8115 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8116 # If your version of vi doesn't support function keys you may want
8118 vi200-f|visual 200 no function keys,
8119 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8120 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8121 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8123 vi200-rv|visual 200 reverse video,
8124 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8126 # the function keys are programmable but we don't reprogram them to their
8127 # default values with <is2> because programming them is very verbose. maybe
8128 # an initialization file should be made for the 300 and they could be stuck
8130 # (vi300: added <rmam>/<smam> based on init string -- esr)
8131 vi300|visual 300 ansi x3.64,
8134 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8135 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8136 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8138 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8139 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8140 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8141 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8142 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8143 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8144 smso=\E[1m, smul=\E[4m,
8145 # some of the vi300s have older firmware that has the command
8146 # sequence for setting editing extent reversed.
8147 vi300-old|visual 300 with old firmware (set edit extent reversed),
8148 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8151 # Visual 500 prototype entry from University of Wisconsin.
8152 # The best place to look for the escape sequences is page A1-1 of the
8153 # Visual 500 manual. The initialization sequence given here may be
8154 # overkill, but it does leave out some of the initializations which can
8155 # be done with the menus in set-up mode.
8156 # The :xp: line below is so that emacs can understand the padding requirements
8157 # of this slow terminal. :xp: is 10 time the padding factor.
8158 # (vi500: removed unknown :xp#4: termcap;
8159 # also added empty <acsc> to suppress tic warning -- esr)
8162 cols#80, it#8, lines#33,
8163 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8164 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8165 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8166 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8167 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8169 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8170 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8171 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8172 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8174 # The visual 550 is a visual 300 with tektronix graphics,
8175 # and with 33 lines. clear screen is modified here to
8176 # also clear the graphics.
8177 vi550|visual 550 ansi x3.64,
8179 clear=\030\E[H\E[2J, use=vi300,
8181 vi603|visual603|visual 603,
8183 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8184 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8185 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8186 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8187 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8188 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8189 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8195 # 3471 North First Street
8196 # San Jose, CA 95134
8197 # Vox: (408)-473-1200
8198 # Fax: (408) 473-1222
8199 # Web: http://www.wyse.com
8201 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8202 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8203 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8204 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8206 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8207 # They now own the Qume and Amdek brands, too. So these are the people to
8208 # talk with about all Link, Qume, and Amdek terminals.
8210 # These entries include a few small fixes.
8211 # I canceled the bel capacities in the vb entries.
8212 # I made two trivial syntax fixes in the wyse30 entry.
8213 # I made some entries relative to adm+sgr.
8216 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8218 # Although the Wyse 30 can support more than one attribute
8219 # it requires magic cookies to do so. Many applications do not
8220 # function well with magic cookies. The following terminfo uses
8221 # the protect mode to support one attribute (dim) without cookies.
8222 # If more than one attribute is needed then the wy30-mc terminfo
8225 wy30|wyse30|Wyse 30,
8226 am, bw, hs, mc5i, mir, msgr, xon,
8227 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8228 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8229 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8230 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8231 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8232 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8233 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8234 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8235 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8236 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8237 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8238 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8239 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8240 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8241 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8242 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8243 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8244 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8245 smso=\E`7\E), tbc=\E0, tsl=\EF,
8247 # This terminal description uses the non-hidden attribute mode
8248 # (with magic cookie).
8250 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8251 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8254 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8255 rmcup=\EG0, rmso=\EG0,
8256 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8257 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8258 smso=\EG4, use=wy30, use=adm+sgr,
8259 # The mandatory pause used by <flash> does not work with
8260 # older versions of terminfo. If you see this effect then
8261 # unset xon and delete the / from the delay.
8262 # i.e. change $<100/> to $<100>
8263 wy30-vb|wyse30-vb|wyse 30 visible bell,
8266 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8267 # Normal) without magic cookies by using the protect mode.
8268 # The following description uses this feature, but when more
8269 # than one attribute is put on the screen at once, all attributes
8270 # will be changed to be the same as the last attribute given.
8271 # The Wyse 50 can support more attributes when used with magic
8272 # cookies. The wy50-mc terminal description uses magic cookies
8273 # to correctly handle multiple attributes on a screen.
8275 wy50|wyse50|Wyse 50,
8276 am, bw, hs, mc5i, mir, msgr, xon,
8277 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8278 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8279 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8280 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8281 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8282 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8283 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8284 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8285 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8286 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8287 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8288 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8289 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8290 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8291 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8292 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8293 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8294 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8295 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8296 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8297 smso=\E`6\E), tbc=\E0, tsl=\EF,
8299 # This terminal description uses the non-hidden attribute mode
8300 # (with magic cookie).
8302 # The mandatory pause used by flash does not work with some
8303 # older versions of terminfo. If you see this effect then
8304 # unset <xon> and delete the / from the delay.
8305 # i.e. change $<100/> to $<100>
8306 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8307 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8310 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8311 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8312 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8313 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8314 smso=\EGt, use=wy50, use=adm+sgr,
8315 wy50-vb|wyse50-vb|wyse 50 visible bell,
8317 wy50-w|wyse50-w|wyse 50 132-column,
8318 cols#132, lw#7, nlab#16, wsl#97,
8319 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8321 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8325 # The Wyse 350 is a Wyse 50 with color.
8326 # Unfortunately this means that it has magic cookies.
8327 # The color attributes are designed to overlap the reverse, dim and
8328 # underline attributes. This is nice for monochrome applications
8329 # because you can make underline stuff green (or any other color)
8330 # but for true color applications it's not so hot because you cannot
8331 # mix color with reverse, dim or underline.
8332 # To further complicate things one of the attributes must be
8333 # black (either the foreground or the background). In reverse video
8334 # the background changes color with black letters. In normal video
8335 # the foreground changes colors on a black background.
8336 # This terminfo uses some of the more advanced features of curses
8337 # to display both color and blink. In the final analysis I am not
8338 # sure that the wy350 runs better with this terminfo than it does
8339 # with the wy50 terminfo (with user adjusted colors).
8341 # The mandatory pause used by flash does not work with
8342 # older versions of terminfo. If you see this effect then
8343 # unset xon and delete the / from the delay.
8344 # i.e. change $<100/> to $<100>
8346 # Bug: The <op> capability resets attributes.
8347 wy350|wyse350|Wyse 350,
8348 am, bw, hs, mc5i, mir, xon,
8349 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8351 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8352 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8353 cub1=^H, cud1=^J, cuf1=^L,
8354 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8355 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8356 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8357 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8358 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8359 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8360 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8361 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8362 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8363 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8364 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8365 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8366 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8367 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8368 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8369 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8370 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8371 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8372 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8373 wy350-vb|wyse350-vb|wyse 350 visible bell,
8375 wy350-w|wyse350-w|wyse 350 132-column,
8376 cols#132, lw#7, nlab#16, wsl#97,
8377 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8379 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8382 # This terminfo description is untested.
8383 # The wyse100 emulates an adm31, so the adm31 entry should work.
8387 cols#80, lines#24, xmc#1,
8388 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8389 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8390 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8391 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8392 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8393 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8394 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8396 # The Wyse 120/150 has most of the features of the Wyse 60.
8397 # This terminal does not need padding up to 9600 baud!
8398 # <msgr> should be set but the clear screen fails when in
8399 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8402 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8403 am, bw, hs, km, mc5i, mir, msgr, xon,
8404 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8405 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8406 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8407 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8409 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8410 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8411 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8412 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8413 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8414 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8415 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8416 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8417 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8418 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8419 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8420 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8421 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8422 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8423 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8424 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8425 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8427 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8428 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8429 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8430 tbc=\E0, tsl=\EF, use=adm+sgr,
8432 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8433 cols#132, lw#7, nlab#16, wsl#97,
8434 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8435 rs2=\E`;$<70>, use=wy120,
8437 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8438 lh@, lines#25, lw@, nlab@,
8439 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8441 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8442 lh@, lines#25, lw@, nlab@,
8443 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8445 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8448 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8451 # The Wyse 60 is like the Wyse 50 but with more padding.
8452 # The reset strings are slow and the pad times very depending
8453 # on other parameters such as font loading. I have tried
8454 # to follow the following outline:
8456 # <rs1> -> set personality
8457 # <rs2> -> set number of columns
8458 # <rs3> -> set number of lines
8459 # <is1> -> select the proper font
8460 # <is2> -> do the initialization
8461 # <is3> -> set up display memory (2 pages)
8463 # The Wyse 60's that have vt100 emulation are slower than the
8464 # older Wyse 60's. This change happened mid-1987.
8465 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8467 # The meta key is only half right. This terminal will return the
8468 # high order bit set when you hit CTRL-function_key
8470 # It may be useful to assign two function keys with the
8471 # values \E=(\s look at old data in page 1
8472 # \E=W, look at bottom of page 1
8473 # where \s is a space ( ).
8476 # The Wyse 60 runs faster when the XON/XOFF
8477 # handshake is turned off.
8479 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8480 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8481 wy60|wyse60|Wyse 60,
8482 am, bw, hs, km, mc5i, mir, msgr,
8483 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8484 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8485 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8486 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8487 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8488 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8489 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8490 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8491 ip=$<3>, is1=\EcB0\EcC1,
8492 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8493 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8494 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8495 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8496 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8497 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8498 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8499 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8500 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8501 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8502 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8503 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8504 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8505 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8506 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8507 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8508 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8509 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8510 tbc=\E0, tsl=\EF, use=adm+sgr,
8512 wy60-w|wyse60-w|wyse 60 132-column,
8513 cols#132, lw#7, nlab#16, wsl#97,
8514 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8515 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8517 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8518 lh@, lines#25, lw@, nlab@,
8519 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8520 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8521 lh@, lines#25, lw@, nlab@,
8522 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8524 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8526 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8527 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8528 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8529 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8530 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8531 cols#132, lw#7, nlab#16, wsl#97,
8532 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8533 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8534 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8536 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8537 lh@, lines#43, lw@, nlab@,
8538 pln@, rs3=\Ee+$<150>, use=wy60-42,
8539 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8540 lh@, lines#43, lw@, nlab@,
8541 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8543 wy60-vb|wyse60-vb|Wyse 60 visible bell,
8545 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8548 # The Wyse-99GT looks at lot like the Wyse 60 except that it
8549 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
8550 # setup parameter controls the number of lines on the screen.
8551 # For the Wyse 99GT the "lines" setup parameter controls the
8552 # number of lines in a page. The screen can display 25 lines max.
8553 # The Wyse-99GT also has personalities for the VT220 and
8554 # Tektronix 4014. But this has no bearing on the native mode.
8556 # (msgr) should be set but the clear screen fails when in
8557 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8558 # then set msgr, else use msgr@.
8560 # u0 -> enter Tektronix mode
8561 # u1 -> exit Tektronix mode
8563 wy99gt|wyse99gt|Wyse 99gt,
8565 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
8566 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
8567 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
8568 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
8569 u0=\E~>\E8, u1=\E[42h, use=wy60,
8571 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
8572 cols#132, lw#7, nlab#16, wsl#97,
8573 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8574 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
8577 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
8578 lh@, lines#25, lw@, nlab@,
8579 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8581 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
8582 lh@, lines#25, lw@, nlab@,
8583 pln@, rs2=\E`;$<150>, use=wy99gt-w,
8585 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
8588 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
8591 # Can't set tabs! Other bugs (ANSI mode only):
8592 # - can't redefine function keys (anyway, key redefinition in ANSI mode
8593 # is too much complex to be described);
8594 # - meta key can't be described (the terminal forgets it when reset);
8595 # The xon-xoff handshaking can't be disabled while in ansi personality, so
8596 # emacs can't work at speed greater than 9600 baud. No padding is needed at
8598 # dch1 has been commented out because it causes annoying glittering when
8599 # vi deletes one character at the beginning of a line with tabs in it.
8600 # dch makes sysgen(1M) have a horrible behaviour when deleting
8601 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
8602 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
8603 # not, so smir and rmir are commented out as well.
8604 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8605 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
8606 am, km, mc5i, mir, msgr, xenl,
8607 cols#80, it#8, lines#25, vt#3,
8608 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
8609 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8610 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
8611 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
8612 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
8613 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
8614 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8615 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
8616 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
8617 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
8618 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
8619 il1=\E[L, ind=\n$<1>, invis=\E[8m,
8620 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
8621 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8622 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8623 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
8624 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
8625 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
8626 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
8627 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
8628 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8629 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
8630 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
8632 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
8633 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
8634 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8636 # This is the american terminal. Here tabs work fine.
8637 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8638 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
8639 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
8641 # This terminal (firmware version 02) has a lot of bugs:
8643 # - other bugs in ANSI modes (see above).
8644 # This description disables handshaking when using cup. This is because
8645 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
8646 # cannot be used at speeds greater than 9600 baud, because at greater
8647 # speeds handshaking is needed even for character sending. If you use
8648 # DTR handshaking, you can use even greater speeds.
8649 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8650 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
8651 am, bw, hs, km, mc5i, mir, msgr, xon,
8652 cols#80, it#8, lines#25, wsl#46,
8653 acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
8654 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
8655 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
8656 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8657 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
8658 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
8659 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
8661 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
8662 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
8663 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
8664 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
8665 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
8666 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
8667 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8668 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
8669 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
8670 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
8671 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
8672 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
8673 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
8674 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
8676 # This is the american terminal. Here tabs work.
8677 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8678 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
8679 hts=\E1, tbc=\E0, use=wy99f,
8682 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
8683 # The reset strings are slow and the pad times very depending
8684 # on other parameters such as font loading. I have tried
8685 # to follow the following outline:
8687 # <rs1> -> set personality
8688 # <rs2> -> set number of columns
8689 # <rs3> -> set number of lines
8690 # <is1> -> select the proper font
8691 # <is2> -> do the initialization
8692 # <is3> -> set up display memory (2 pages)
8694 # The display memory may be used for either text or graphics.
8695 # When "Display Memory = Shared" the terminal will have more pages
8696 # but garbage may be left on the screen when you switch from
8697 # graphics to text. If "Display Memory = Unshared" then the
8698 # text area will be only one page long.
8700 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
8701 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8702 wy160|wyse160|Wyse 160,
8703 am, bw, hs, km, mc5i, mir, msgr,
8704 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
8705 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8706 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
8707 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8708 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
8709 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
8710 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
8711 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
8712 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8713 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8714 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8715 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8716 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8717 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8718 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8719 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8720 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
8721 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8722 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8723 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
8724 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
8725 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
8726 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
8727 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8728 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8729 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8730 tbc=\E0, tsl=\EF, use=adm+sgr,
8732 wy160-w|wyse160-w|wyse 160 132-column,
8733 cols#132, lw#7, nlab#16, wsl#90,
8734 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
8735 rs2=\EeF$<150>\E`;$<150>, use=wy160,
8737 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
8738 lh@, lines#25, lw@, nlab@,
8739 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
8740 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
8741 lh@, lines#25, lw@, nlab@,
8742 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
8744 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
8746 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
8747 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
8748 rs3=\Ee*$<150>, use=wy160,
8749 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
8750 cols#132, lw#7, nlab#16, wsl#90,
8751 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
8752 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
8754 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
8755 lh@, lines#43, lw@, nlab@,
8756 pln@, rs3=\Ee+$<150>, use=wy160-42,
8757 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
8758 lh@, lines#43, lw@, nlab@,
8759 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
8761 wy160-vb|wyse160-vb|Wyse 160 visible bell,
8763 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
8766 # The Wyse 75 is a vt100 lookalike without advanced video.
8768 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
8769 # Underline) without magic cookies. The following description
8770 # uses this capability, but when more than one attribute is
8771 # put on the screen at once, all attributes will be changed
8772 # to be the same as the last attribute given.
8773 # The Wyse 75 can support more attributes when used with magic
8774 # cookies. The wy75-mc terminal description uses magic cookies
8775 # to correctly handle multiple attributes on a screen.
8777 wy75|wyse75|wyse 75,
8778 am, hs, mc5i, mir, msgr, xenl, xon,
8779 cols#80, lines#24, ma#1, pb#1201, wsl#78,
8780 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8781 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
8782 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
8783 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8784 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8785 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
8786 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
8787 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
8788 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
8789 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
8790 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8791 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8792 ind=\n$<2>, ip=$<1>,
8793 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
8794 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
8795 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
8796 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8797 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8798 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
8799 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
8800 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8801 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
8802 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
8803 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
8804 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
8805 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
8807 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
8808 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8809 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
8810 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
8812 # This terminal description uses the non-hidden attribute mode
8813 # (with magic cookie).
8815 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
8818 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
8819 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
8820 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
8821 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
8823 wy75-vb|wyse75-vb|wyse 75 with visible bell,
8826 wy75-w|wyse75-w|wyse 75 in 132 column mode,
8828 rs2=\E[35h\E[?3h$<80>, use=wy75,
8829 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
8833 # Wyse 85 emulating a vt220 7 bit mode.
8834 # 24 line screen with status line.
8836 # The vt220 mode permits more function keys but it wipes out
8837 # the escape key. I strongly recommend that <f11> be set to
8839 # The terminal may have to be set for 8 data bits and 2 stop
8840 # bits for the arrow keys to work.
8841 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
8842 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
8843 # <dch> leave trash on the screen when used without XON/XOFF.
8845 wy85|wyse85|wyse 85,
8846 am, hs, mc5i, mir, msgr, xenl, xon,
8847 cols#80, it#8, lines#24, wsl#80,
8848 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8849 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8850 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8851 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8852 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8853 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8854 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8855 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8856 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8857 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8858 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8859 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8860 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8861 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8862 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8863 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
8864 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8865 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8866 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
8867 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
8868 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
8869 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8870 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8871 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8872 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8874 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8875 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8876 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8877 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
8879 # Wyse 85 with visual bell.
8880 wy85-vb|wyse85-vb|wyse 85 with visible bell,
8881 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
8883 # Wyse 85 in 132-column mode.
8884 wy85-w|wyse85-w|wyse 85 in 132-column mode,
8886 rs2=\E[35h\E[?3h$<70>, use=wy85,
8888 # Wyse 85 in 132-column mode with visual bell.
8889 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
8892 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
8893 # This copes with an apparent firmware bug in the wy85. He writes:
8894 # "What I did was change leave the terminal cursor keys set to Normal
8895 # (instead of application), and change \E[ to \233 for all the keys in
8896 # terminfo. At one point, I found some reference indicating that this
8897 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
8898 # me), but I can't find that and the server under my bookmark to "Wyse
8899 # Technical" isn't responding. So there's the question of wether the wy85
8900 # terminfo should reflect the manufactuer's intended behaviour of the terminal
8902 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
8903 am, hs, mc5i, mir, msgr, xenl, xon,
8904 cols#80, it#8, lines#24, wsl#80,
8905 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8906 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8907 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8908 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8909 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8910 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8911 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8912 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8913 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8914 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8915 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8916 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8917 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8918 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8919 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
8920 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
8921 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
8922 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
8923 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
8924 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
8925 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
8926 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
8927 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
8928 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8929 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8930 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8931 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8933 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
8934 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8935 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8936 tsl=\E[40h\E7\E[25;%i%p1%dH,
8938 # Wyse 185 emulating a vt320 7 bit mode.
8940 # This terminal always displays 25 lines. These lines may be used
8941 # as 24 data lines and a terminal status line (top or bottom) or
8942 # 25 data lines. The 48 and 50 line modes change the page size
8943 # and not the number of lines on the screen.
8945 # The Compose Character key can be used as a meta key if changed
8948 wy185|wyse185|wyse 185,
8949 am, hs, km, mc5i, mir, msgr, xenl, xon,
8950 cols#80, it#8, lines#24, wsl#80,
8951 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8952 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8953 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8954 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
8955 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8956 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8957 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
8958 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8959 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
8960 el=\E[K, el1=\E[1K, enacs=\E)0,
8961 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
8962 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
8963 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
8964 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
8965 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
8966 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8967 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
8968 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8969 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8970 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
8971 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8972 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
8973 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
8974 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8975 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
8976 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8977 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
8978 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
8979 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8980 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8981 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8982 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
8985 # Wyse 185 with 24 data lines and top status (terminal status)
8986 wy185-24|wyse185-24|wyse 185 with 24 data lines,
8988 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
8991 # Wyse 185 with visual bell.
8992 wy185-vb|wyse185-vb|wyse 185+flash,
8995 # Wyse 185 in 132-column mode.
8996 wy185-w|wyse185-w|wyse 185 in 132-column mode,
8998 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
8999 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9001 # Wyse 185 in 132-column mode with visual bell.
9002 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9005 # wy325 terminfo entries
9006 # Done by Joe H. Davis 3-9-92
9008 # lines 25 columns 80
9010 wy325|wyse325|Wyse epc,
9011 am, bw, hs, mc5i, mir,
9012 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9013 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9014 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9015 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9016 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9017 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9018 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9019 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9020 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9021 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9022 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9023 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9024 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9025 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9026 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9027 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9028 mc0=\EP, mc4=^T, mc5=\Ed#,
9029 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9030 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9031 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9032 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9033 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9035 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9036 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9037 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9038 tsl=\EF, use=adm+sgr,
9041 # lines 24 columns 80 vb
9043 wy325-vb|wyse325-vb|wyse-325 with visual bell,
9047 # lines 24 columns 132
9049 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9050 cols#132, lw#7, nlab#16, wsl#97,
9051 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9052 rs2=\E`;$<70>, use=wy325,
9054 # lines 25 columns 80
9056 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9057 lh@, lines#25, lw@, nlab@,
9058 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9060 # lines 25 columns 132
9062 wy325-25w|wyse325-25w|wy325 132 columns,
9063 lh@, lines#25, lw@, nlab@,
9064 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9066 # lines 25 columns 132 vb
9068 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9072 # lines 42 columns 80
9074 wy325-42|wyse325-42|wyse-325 42 lines,
9075 lh@, lines#42, lw@, nlab@,
9076 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9078 # lines 42 columns 132
9080 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9081 lh@, lines#42, lw@, nlab@,
9082 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9084 # lines 42 columns 132 vb
9086 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9089 # lines 43 columns 80
9091 wy325-43|wyse325-43|wyse-325 43 lines,
9092 lh@, lines#43, lw@, nlab@,
9095 # lines 43 columns 132
9097 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9098 lh@, lines#43, lw@, nlab@,
9099 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9101 # lines 43 columns 132 vb
9103 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9106 # Wyse 370 -- 24 line screen with status line.
9108 # The terminal may have to be set for 8 data bits and 2 stop
9109 # bits for the arrow keys to work.
9111 # If you change keyboards the terminal will send different
9113 # The following definition is for the basic terminal without
9116 # <u0> -> enter Tektronix 4010/4014 mode
9117 # <u1> -> exit Tektronix 4010/4014 mode
9118 # <u2> -> enter ASCII mode (from any ANSI mode)
9119 # <u3> -> exit ASCII mode (goto native ANSI mode)
9120 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9121 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
9123 # Bug: The <op> capability resets attributes.
9124 wy370-nk|wyse 370 without function keys,
9125 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9126 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9127 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9128 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9129 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9130 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9131 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9132 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9133 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9134 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9135 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9136 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9137 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9138 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9139 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9141 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9142 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9143 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9144 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9146 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9147 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9148 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9149 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9150 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9151 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9152 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9153 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9154 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9155 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9156 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9157 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9159 # Function key set for the ASCII (wy-50 compatible) keyboard
9160 # This is the default 370.
9162 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9163 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9164 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9165 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9166 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9167 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9168 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9169 knp=\E[U, kpp=\E[V, use=wy370-nk,
9171 # Function key set for the VT-320 (and wy85) compatible keyboard
9173 wy370-105k|Wyse 370 with 105 key keyboard,
9174 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9175 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9176 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9177 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9178 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9179 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9180 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9181 use=wy370-nk, use=vt220+keypad,
9183 # Function key set for the PC compatible keyboard
9185 wy370-EPC|Wyse 370 with 102 key keyboard,
9186 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9187 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9188 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9189 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9190 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9192 # Wyse 370 with visual bell.
9193 wy370-vb|Wyse 370 with visible bell,
9196 # Wyse 370 in 132-column mode.
9197 wy370-w|Wyse 370 in 132-column mode,
9199 rs2=\E[35h\E[?3h$<70>, use=wy370,
9201 # Wyse 370 in 132-column mode with visual bell.
9202 wy370-wvb|Wyse 370 with visible bell 132-columns,
9203 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9204 wy370-rv|Wyse 370 reverse video,
9205 rs3=\E[32h\E[?5h, use=wy370,
9207 # Wyse 99gt Tektronix 4010/4014 emulator,
9209 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9212 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9213 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9215 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9217 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9218 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9220 # Wyse 160 Tektronix 4010/4014 emulator,
9222 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9223 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9224 home=^]8`g @\037, use=wy99gt-tek,
9226 # Wyse 370 Tektronix 4010/4014 emulator,
9228 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9231 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9232 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9234 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9236 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9237 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9238 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9240 # Vendor-supplied Wyse entries end here.
9243 #TITLE: TERMINFO ENTRY WY520
9245 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9246 # BBS with the addition of more function keys and special keys.
9248 # rs1 -> set personality
9249 # rs2 -> set number of columns
9250 # rs3 -> set number of lines
9251 # is1 -> select the proper font
9252 # is2 -> do the initialization
9253 # is3 -> If this string is empty then rs3 gets sent.
9255 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9256 # - The BS key is programmed to generate BS in smcup since
9257 # is2 doesn't seem to work.
9258 # - Remove and shift/Remove: delete a character
9259 # - Insert : enter insert mode
9260 # - Find : delete to end of file
9261 # - Select : clear a line
9262 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9264 # - Bottom status line (host writable line) is used.
9265 # - smkx,rmkx are removed because this would put the numeric
9266 # keypad in Dec application mode which doesn't seem to work
9267 # with SCO applications.
9269 wy520|wyse520|wyse 520,
9270 am, hs, km, mc5i, mir, xenl, xon,
9271 cols#80, it#8, lines#24, wsl#80,
9272 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9273 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9274 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9275 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9276 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9277 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9278 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9279 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9280 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9281 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9282 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9283 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9284 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9285 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9286 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9287 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9288 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9289 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9290 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9291 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9292 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9293 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9294 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9295 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9296 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9297 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9298 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9299 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9300 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9301 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9302 vpa=\E[%i%p1%dd, use=vt220+keypad,
9304 # Wyse 520 with 24 data lines and status (terminal status)
9305 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9307 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9310 # Wyse 520 with visual bell.
9311 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9312 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9314 # Wyse 520 in 132-column mode.
9315 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9317 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9318 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9320 # Wyse 520 in 132-column mode with visual bell.
9321 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9322 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9325 # Wyse 520 emulating a vt420 7 bit mode.
9326 # The DEL key is programmed to generate BS in is2.
9327 # With EPC keyboard.
9328 # - 'End' key will clear till end of line on EPC keyboard
9329 # - Shift/End : ignored.
9330 # - Insert : enter insert mode.
9331 # - Delete : delete a character (have to change interrupt character
9332 # to CTRL-C: stty intr '^c') for it to work since the
9333 # Delete key sends 7FH.
9334 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9335 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9336 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9339 # Wyse 520 with 24 data lines and status (terminal status)
9340 # with EPC keyboard.
9341 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9343 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9346 # Wyse 520 with visual bell.
9347 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9348 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9350 # Wyse 520 in 132-column mode.
9351 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9353 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9354 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9356 # Wyse 520 in 132-column mode with visual bell.
9357 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9358 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9360 # Wyse 520 in 80-column, 36 lines
9361 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9364 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9367 # Wyse 520 in 80-column, 48 lines
9368 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9371 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9374 # Wyse 520 in 132-column, 36 lines
9375 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9378 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9381 # Wyse 520 in 132-column, 48 lines
9382 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9385 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9389 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9390 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9393 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9396 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9397 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9400 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9403 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9404 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9407 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9410 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9411 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9414 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9417 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9418 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9419 # file and we don't know what <hts> is -- esr)
9420 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9422 cols#80, it#8, lines#24,
9423 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9424 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9425 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9426 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9427 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9428 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9431 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9432 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9433 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9434 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9437 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9438 wy100q|Wyse 100 for Quotron,
9440 cols#80, lines#24, xmc#1,
9441 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9443 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9444 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9445 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9447 #### Kermit terminal emulations
9449 # Obsolete Kermit versions may be listed in the section describing obsolete
9450 # non-ANSI terminal emulators later in the file.
9453 # KERMIT standard all versions.
9454 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9455 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9456 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9457 kermit|standard kermit,
9460 clear=\EE, cub1=^H, cuf1=\EC,
9461 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9462 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9463 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9464 kermit-am|standard kermit plus auto-margin,
9466 is2=K1 Standard Kermit plus Automatic Margins\n,
9469 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9470 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9472 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9473 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9476 clear=\EH\EJ, ed@, el@,
9477 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9479 # Cannot use line 25, now acts funny like ansi special scrolling region.
9480 # Initialization must escape from that region by cursor position to line 24.
9481 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9482 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9483 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9484 pckermit120|UCB IBMPC Kermit 1.20,
9486 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9488 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9489 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9490 # MS-DOS Kermit 2.27 for the IBMPC
9491 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9492 # Cannot use line 25, now acts funny like ansi special scrolling region.
9493 # Initialization must escape from that region by cursor position to line 24.
9494 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9495 # Reverse video for standout like H19.
9496 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9497 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9498 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9500 cols#80, it#8, lines#24,
9501 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9502 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9503 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9504 home=\EH, ht=^I, il1=\EL,
9505 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9506 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9507 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9508 # MS-DOS Kermit 2.27 with automatic margins
9509 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9510 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9512 cvvis=\EO\Eq\EG\EvK5,
9513 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9515 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9516 # Automatic margins now default. Use ansi <sgr> for highlights.
9517 # Define function keys.
9518 # (msk22714: removed obsolete ":kn#10:" -- esr)
9519 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9520 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9522 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9523 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9524 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9525 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9526 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9527 # This was designed for a VT320 emulator, but it is probably a good start
9528 # at support for the VT320 itself.
9529 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9530 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9531 vt320-k3|MS-Kermit 3.00's vt320 emulation,
9532 am, eslok, hs, km, mir, msgr, xenl,
9533 cols#80, it#8, lines#49, pb#9600, vt#3,
9534 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9535 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9536 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9537 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9538 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9539 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9540 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9541 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9542 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9543 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9544 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9545 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9546 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9547 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9548 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9549 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9550 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9551 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9552 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9553 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9554 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9555 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9556 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9557 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
9558 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9559 vt320-k311|dec vt320 series as defined by kermit 3.11,
9560 am, eslok, hs, mir, msgr, xenl, xon,
9561 cols#80, it#8, lines#24, vt#3,
9562 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9563 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9564 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9565 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9566 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9567 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9568 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9569 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
9570 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
9571 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
9572 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
9573 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9574 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9575 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
9576 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
9577 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
9578 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
9579 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
9580 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
9581 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
9583 ######## NON-ANSI TERMINAL EMULATIONS
9588 # These entries attempt to describe Avatar, a terminal emulation used with
9589 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
9590 # capabilities, but with cheaper (shorter) control sequences. Messy design,
9591 # excessively dependent on PC idiosyncracies, but apparently rather popular
9594 # No color support. Avatar doesn't fit either of the Tektronix or HP color
9595 # models that terminfo knows about. An Avatar color attribute is the
9596 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
9598 # I wrote these entries while looking at the Avatar spec. I don't have
9599 # the facilities to test them. Let me know if they work, or don't.
9601 # Avatar escapes not used by these entries (because maybe you're smarter
9602 # and more motivated than I am and can figure out how to wrap terminfo
9603 # around some of them, and because they are weird enough to be funny):
9605 # ^L -- clear window/reset current attribute to default
9606 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
9608 # bit: 6 5 4 3 2 1 0
9610 # +---+---+ | +---+---+
9612 # | | foreground color
9613 # | foreground intensity
9616 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
9617 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
9618 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
9619 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
9620 # (^V^L and ^V^M set the current attribute as a side-effect.)
9621 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
9622 # in the pattern, <c> the number of times the pattern
9623 # should be repeated. If either value is 0, no-op.
9624 # The pattern can contain Avatar console codes,
9625 # including other ^V ^Y patterns.
9627 # ^V^O -- clockwise mode on; turn print direction right each time you
9628 # hit a window edge (yes, really). Turned off by CR
9630 # ^V^Q%c -- query the driver
9631 # ^V^R -- driver reset
9632 # ^V^S -- Sound tone (PC-specific)
9633 # ^V^T -- change highlight at current cursor poition to %c
9634 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
9635 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
9638 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9639 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
9640 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
9641 # which is the only method that will actually work for multiple highlights.)
9643 # Update by TD - 2004: half of this was inconsistent. Found documentation
9644 # and repaired most of the damage. sgr0 is probably incorrect, but the
9645 # available documentation gives no clues for a workable string.
9646 avatar0|avatar terminal emulator level 0,
9648 cols#80, it#8, lines#25,
9649 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
9650 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
9651 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
9653 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
9654 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
9656 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9657 avatar0+|avatar terminal emulator level 0+,
9658 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
9659 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9660 avatar|avatar1|avatar terminal emulator level 1,
9661 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
9662 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
9666 # RBComm is a lean and mean terminal emulator written by the Interrupt List
9667 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
9668 # '90s), especially in the BBS world, and still has some loyal users due to
9669 # its very small memory footprint and to a cute macro language.
9670 rbcomm|IBM PC with RBcomm and EMACS keybindings,
9671 am, bw, mir, msgr, xenl,
9672 cols#80, it#8, lines#25,
9673 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9674 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9675 cub1=^H, cud1=^C, cuf1=^B,
9676 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
9677 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
9678 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
9679 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
9680 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
9681 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
9682 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
9683 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
9684 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
9685 rbcomm-nam|IBM PC with RBcomm without autowrap,
9687 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9688 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
9689 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9690 rbcomm-w|IBM PC with RBcomm in 132 column mode,
9692 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9693 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
9694 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9696 ######## LCD DISPLAYS
9700 # from: Eric Z. Ayers (eric@ale.org)
9702 # Matrix Orbital 20x4 LCD display
9703 # Command Character is 0xFE (decimal 254, octal 376)
9705 # On this device, cursor addressability isn't possible. The LCD expects:
9706 # 0xfe G <col> <row>
9707 # for cup: %p1 == row and %p2 is column
9710 # cup=\376G%p2%c%p1%c
9711 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
9712 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
9714 # Alas, there is no cursor upline capability on this display.
9716 # These entries add some 'sanity stuff' to the clear function. That is, it
9717 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
9718 # and turns off the cursor blinking and stuff like that.
9720 # NOTE: calling 'beep' turns on the backlight (bell)
9721 # NOTE: calling 'flash' turns it on and back off (visual bell)
9723 MtxOrb|Generic Matrix Orbital LCD display,
9724 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
9725 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
9726 flash=\376B\001$<200>\376F, home=\376H,
9727 MtxOrb204|20x4 Matrix Orbital LCD display,
9728 cols#20, lines#4, use=MtxOrb,
9729 MtxOrb162|16x2 Matrix Orbital LCD display,
9730 cols#16, lines#2, use=MtxOrb,
9733 ######## OLDER TERMINAL TYPES
9735 # This section is devoted to older commercial terminal brands that are now
9736 # discontinued, but known to be still in use or represented by emulations.
9739 #### AT&T (att, tty)
9741 # This section also includes Teletype-branded VDTs.
9743 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
9744 # Boundless Technologies); for details, see the header comment on the ADDS
9747 # These are AT&T's official terminfo entries. All-caps aliases have been
9750 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
9751 am, eo, mir, msgr, xon,
9752 cols#80, it#8, lines#24,
9753 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
9754 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9755 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9756 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
9757 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
9758 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9759 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9760 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
9761 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
9762 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
9763 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
9764 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9765 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
9767 att2350|AT&T 2350 Video Information Terminal 80 column mode,
9768 mc0@, mc4@, mc5@, use=att2300,
9770 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
9771 # Seems upward compatible with vt100, plus ins/del line/char.
9772 # On sgr, the protection parameter is ignored.
9773 # No check is made to make sure that only 3 parameters are output.
9774 # standout= reverse + half-intensity = 3 | 5.
9775 # bold= reverse + underline = 2 | 3.
9776 # note that half-bright blinking doesn't look different from normal blinking.
9777 # NOTE:you must program the function keys first, label second!
9778 # (att4410: a BSD entry has been seen with the following capabilities:
9779 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
9780 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
9781 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
9782 am, hs, mir, msgr, xon,
9783 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
9784 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9785 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
9786 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
9787 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
9788 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
9789 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
9790 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
9791 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9792 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
9793 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
9794 ll=\E[24H, nel=^M^J,
9795 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
9796 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9797 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9799 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9800 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9801 tsl=\E7\E[25;%p1%{1}%+%dH,
9803 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
9805 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
9807 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
9809 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
9812 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
9814 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
9816 # 5410 in terms of a vt100
9817 # (v5410: added <rmam>/<smam> based on init string -- esr)
9818 v5410|att5410 in terms of a vt100,
9820 cols#80, it#8, lines#24, vt#3,
9821 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9822 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9823 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9824 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
9825 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
9826 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
9827 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
9828 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9829 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
9830 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
9831 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9833 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
9834 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
9835 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9839 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
9840 # even! the 5420 has three modes: scroll, window or page mode
9841 # this terminfo should work in scroll or window mode, but doesn't
9842 # take advantage of any of the differences between them.
9844 # Has memory below (2 lines!)
9845 # 3 pages of memory (plus some spare)
9846 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
9847 # <hpa>, <hts> would work for these, but these work in both scroll and window
9848 # mode... Unset insert character so insert mode works
9849 # <is1> sets 80 column mode,
9850 # <is2> escape sequence:
9851 # 1) turn off all fonts
9852 # 2) function keys off, keyboard lock off, control display off,
9853 # insert mode off, erasure mode off,
9854 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
9855 # 4) reset origin mode
9856 # 5) set line wraparound
9857 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
9859 # 8) program ENTER to transmit ^J,
9860 # We use \212 to program the ^J because a bare ^J will get translated by
9861 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
9863 # <is3> set screen color to black,
9864 # No representation in terminfo for the delete word key: kdw1=\Ed
9865 # Key capabilities assume the power-up send sequence...
9866 # This <rmcup> is not strictly necessary, but it helps maximize
9867 # memory usefulness: <rmcup=\Ez>,
9868 # Alternate sgr0: <sgr0=\E[m\EW^O>,
9869 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
9870 # smkx programs the SYS PF keys to send a set sequence.
9871 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
9872 # This string causes them to send the strings <kf1>-<kf8>
9873 # when pressed in SYS PF mode.
9874 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
9875 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
9877 lh#2, lm#78, lw#8, nlab#8, wsl#55,
9878 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
9879 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
9880 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
9881 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
9882 flash=\E[?5h$<200>\E[?5l, home=\E[x,
9883 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
9884 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
9885 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
9886 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
9887 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
9888 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
9889 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9890 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9891 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
9892 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
9893 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
9894 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
9895 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
9896 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
9897 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9898 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
9899 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
9900 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9903 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
9904 cols#132, lm#54, wsl#97,
9905 is1=\E[?3h$<100>, use=att4415,
9907 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
9908 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
9910 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
9911 cols#132, lm#54, wsl#97,
9912 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
9915 # Note that this mode permits programming USER PF KEYS and labels
9916 # However, when you program user pf labels you have to reselect
9917 # user pf keys to make them appear!
9918 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
9919 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
9920 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
9921 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
9923 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
9924 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9927 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
9928 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9931 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
9932 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9935 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
9936 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9939 att5420_2|AT&T 5420 model 2 80 cols,
9940 am, db, hs, mir, msgr, xon,
9941 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9942 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9943 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
9944 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9945 cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
9946 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
9947 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
9948 dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
9949 el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9950 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9951 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9953 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9954 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
9955 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
9956 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
9957 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
9958 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9959 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9960 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
9961 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
9962 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
9963 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
9964 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
9965 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9967 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9968 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
9969 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9970 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9971 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
9973 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9976 att4418|att5418|AT&T 5418 80 cols,
9979 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9980 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
9981 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9982 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9983 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
9984 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
9985 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
9986 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
9987 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
9988 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
9989 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
9990 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
9991 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
9992 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
9993 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9994 att4418-w|att5418-w|AT&T 5418 132 cols,
9996 is1=\E[?3h, use=att5418,
9998 att4420|tty4420|teletype 4420,
9999 OTbs, da, db, eo, msgr, ul, xon,
10000 cols#80, lines#24, lm#72,
10001 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10002 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10003 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10004 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10005 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10006 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10007 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10008 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10010 # The following is a terminfo entry for the Teletype 4424
10011 # asynchronous keyboard-display terminal. It supports
10012 # the vi editor. The terminal must be set up as follows,
10014 # HIGHLIGHT DEFINITION 3-TONE
10015 # DISPLAY FUNCTION GROUP III
10017 # The second entry below provides limited (a la adm3a)
10018 # operation under GROUP II.
10020 # This must be used with DISPLAY FUNCTION GROUP I or III
10021 # and HIGHLIGHT DEFINITION 3-TONE
10022 # The terminal has either bold or blink, depending on options
10024 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10025 att4424|tty4424|teletype 4424,
10028 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10029 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10030 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10031 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10032 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10033 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10034 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10035 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10036 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10037 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10038 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10040 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10041 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10044 att4424-1|tty4424-1|teletype 4424 in display function group I,
10045 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10048 # This entry is not one of AT&T's official ones, it was translated from the
10049 # 4.4BSD termcap file. The highlight strings are different from att4424.
10050 # I have no idea why this is -- older firmware version, maybe?
10051 # The following two lines are the comment originally attached to the entry:
10052 # This entry appears to avoid the top line - I have no idea why.
10053 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10054 att4424m|tty4424m|teletype 4424M,
10056 cols#80, it#8, lines#23,
10057 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10058 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10059 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10060 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10061 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10062 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10063 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10065 # The Teletype 5425 is really version 2 of the Teletype 5420. It
10066 # is quite similar, except for some minor differences. No page
10067 # mode, for example, so all of the <cup> sequences used above have
10068 # to change back to what's being used for the 5410. Many of the
10069 # option settings have changed their numbering as well.
10071 # This has been tested on a preliminary model.
10073 # (att5425: added <rmam>/<smam> based on the init string -- esr)
10074 att5425|tty5425|att4425|AT&T 4425/5425,
10075 am, da, db, hs, mir, msgr, xenl, xon,
10076 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10077 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10078 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10079 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10080 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10081 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10082 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10083 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10084 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10085 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10086 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10087 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10088 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10089 invis=\E[8m, is1=\E<\E[?3l$<100>,
10090 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10091 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10092 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10093 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10094 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10095 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10096 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10098 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10099 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10100 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10101 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10102 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10103 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10104 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10105 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10106 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10107 vpa=\E[%p1%{1}%+%dd,
10109 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10110 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10112 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10113 cols#132, lm#54, wsl#97,
10114 is1=\E[?3h$<100>, use=tty5425,
10116 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10117 # I also added <rmam>/<smam> -- esr)
10118 att4426|tty4426|teletype 4426S,
10120 cols#80, lines#24, lm#48,
10121 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10122 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10123 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10124 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10125 cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
10126 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10127 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10128 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10129 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10130 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10131 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10132 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10133 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10134 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10135 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10136 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10139 # Terminfo entry for the AT&T 510 A Personal Terminal
10140 # Function keys 9 - 16 are available only after the
10141 # screen labeled (soft keys/action blocks) are labeled. Function key
10142 # 9 corresponds to the leftmost touch target on the screen,
10143 # function key 16 corresponds to the rightmost.
10145 # This entry is based on one done by Ernie Rice at Summit, NJ and
10146 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
10147 att510a|bct510a|AT&T 510A Personal Terminal,
10148 am, mir, msgr, xenl, xon,
10149 cols#80, lh#2, lines#24, lw#7, nlab#8,
10150 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10151 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10152 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10153 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
10154 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10155 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10156 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10157 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10158 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10159 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10160 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10161 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10162 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10163 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10164 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10165 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10166 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10167 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10168 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10169 smul=\E[4m, tbc=\E[3g,
10171 # Terminfo entry for the AT&T 510 D Personal Terminal
10172 # Function keys 9 through 16 are accessed by bringing up the
10174 # Function key 9 corresponds to the leftmost touch target on the screen,
10175 # function key 16 corresponds to the rightmost.
10177 # There are problems with soft key labeling. These are due to
10178 # strangenesses in the native terminal that are impossible to
10179 # describe in a terminfo.
10180 att510d|bct510d|AT&T 510D Personal Terminal,
10181 am, da, db, mir, msgr, xenl, xon,
10182 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10183 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10184 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10185 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10186 cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
10187 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10188 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10189 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10190 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10191 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10192 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10193 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10194 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10195 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10196 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10197 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10198 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10199 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10200 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10201 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10202 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10203 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10204 rs2=\E[5;0|, sc=\E7,
10205 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10206 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10207 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10208 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10210 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10211 att500|att513|AT&T 513 using page mode,
10212 am, chts, mir, msgr, xenl, xon,
10213 cols#80, lh#2, lines#24, lw#8, nlab#8,
10214 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10215 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10216 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10217 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10218 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10219 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10220 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10221 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10222 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10223 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10224 indn=\E[%p1%dE, invis=\E[8m,
10225 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10226 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10227 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10228 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10229 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10230 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10231 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10232 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10233 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10234 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10235 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10236 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10237 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10238 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10239 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10240 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10241 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10242 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10244 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10245 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10246 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10247 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10248 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10249 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10250 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10252 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10253 rs2=\E[5;0|, sc=\E7,
10254 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10255 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10256 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10257 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10260 # printer must be set to EMUL ANSI to accept ESC codes
10261 # <cuu1> stops at top margin
10262 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10263 # and alt font ascii,wrap on,tabs cleared
10264 # <is2> disables newline on LF,Emphasized off
10265 # The <u0> capability sets form length
10266 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10268 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10269 orhi#100, orl#12, orvi#72,
10270 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10272 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10273 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10274 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10275 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10277 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10278 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10279 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10280 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10282 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10283 # The following SET-UP modes are assumed for normal operation:
10284 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10285 # Other SET-UP modes may be set for operator convenience or communication
10286 # requirements. This termcap description is for the Resident Terminal Mode.
10287 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10288 # The BRL entry also said: UNSAFE :ll=\E[70H:
10289 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10291 cols#88, it#8, lines#70, vt#3,
10292 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10293 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10294 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10295 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10296 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10297 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10298 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10301 # 5620 terminfo (2.0 or later ROMS with char attributes)
10302 # The following SET-UP modes are assumed for normal operation:
10303 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10304 # Other SET-UP modes may be set for operator convenience or communication
10305 # requirements. This termcap description is for Resident Terminal Mode. No
10306 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10307 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10308 # Be aware that older versions of the dmd have a firmware bug that affects
10309 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10310 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10311 # also has <ll>=\E[70H commented out and marked unsafe.
10312 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10313 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10314 OTbs, am, msgr, npc, xon,
10315 cols#88, it#8, lines#70,
10316 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10317 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10318 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10319 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10320 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10321 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10322 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10323 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10324 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10325 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10326 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10327 lines#24, use=att5620,
10328 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10329 lines#34, use=att5620,
10330 # 5620 layer running the "S" system's downloaded graphics handler:
10331 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10333 cols#80, it#8, lines#72,
10334 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10335 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10336 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10337 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10340 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10342 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10343 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10344 att605|AT&T 605 80 column 102key keyboard,
10346 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10347 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10348 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10349 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10350 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10351 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10352 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10353 il1=\E[L, ind=^J, invis=\E[8m,
10354 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10355 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10356 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10357 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10358 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10359 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10360 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10361 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10362 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10363 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10364 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10365 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10366 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10367 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10368 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10369 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10370 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10371 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10372 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10373 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10374 tsl=\E7\E[25;%i%p1%dx,
10375 att605-pc|ATT 605 in pc term mode,
10376 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10377 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10378 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10379 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10380 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10381 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10382 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10383 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10384 xonc=e, use=att605,
10385 att605-w|AT&T 605-w 132 column 102 key keyboard,
10387 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10389 # (att610: I added <rmam>/<smam> based on the init string. I also
10390 # added <indn> and <rin> because the BSD file says the att615s have them,
10391 # and the 615 is like a 610 with a big keyboard, and most of their other
10392 # smart terminals support the same sequence -- esr)
10393 att610|AT&T 610; 80 column; 98key keyboard,
10394 am, eslok, hs, mir, msgr, xenl, xon,
10395 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10396 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10397 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10398 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10399 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10400 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10401 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10402 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10403 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10404 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10405 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10406 indn=\E[%p1%dS, invis=\E[8m,
10407 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10408 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10409 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10410 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10411 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10412 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10413 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10415 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10416 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10417 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10418 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10419 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10420 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10421 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10422 att610-w|AT&T 610; 132 column; 98key keyboard,
10424 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10427 att610-103k|AT&T 610; 80 column; 103key keyboard,
10428 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10429 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10430 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10431 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10432 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10433 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10434 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10435 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10436 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10437 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10438 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10439 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10440 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10441 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10443 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10445 att615|AT&T 615; 80 column; 98key keyboard,
10446 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10447 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10448 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10449 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10450 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10451 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10452 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10453 att615-w|AT&T 615; 132 column; 98key keyboard,
10454 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10455 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10456 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10457 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10458 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10459 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10460 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10461 att615-103k|AT&T 615; 80 column; 103key keyboard,
10462 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10463 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10464 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10465 # (att620: I added <rmam>/<smam> based on the init string and
10466 # <rin>/<indn> from a BSD termcap -- esr)
10467 att620|AT&T 620; 80 column; 98key keyboard,
10468 am, eslok, hs, mir, msgr, xenl, xon,
10469 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10471 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10472 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10473 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10474 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10476 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10477 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10478 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10479 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10480 indn=\E[%p1%dS, invis=\E[8m,
10481 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10482 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10483 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10484 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10485 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10486 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10487 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10488 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10489 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10490 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10491 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10492 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10493 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10494 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10495 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10496 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10497 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10498 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10499 rs2=\Ec\E[?3l, sc=\E7,
10500 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10501 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10502 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10503 tsl=\E7\E[25;%i%p1%dx,
10504 att620-w|AT&T 620; 132 column; 98key keyboard,
10506 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10508 att620-103k|AT&T 620; 80 column; 103key keyboard,
10509 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10510 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10511 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10512 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10513 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10514 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10515 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10516 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10517 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10518 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10519 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10520 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10521 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10522 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10523 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10524 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10526 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10528 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10531 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10532 # The following SETUP modes are assumed for normal operation:
10533 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10534 # Font_Size=Large Non-Layers_Window_Cols=80
10535 # Non-Layers_Window_Rows=60
10536 # Other SETUP modes may be set for operator convenience or communication
10537 # requirements. Some capabilities assume a printer attached to the Aux EIA
10538 # port. This termcap description is for the Fixed Non-Layers Window. No
10539 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10540 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10541 att630|AT&T 630 windowing terminal,
10542 OTbs, am, da, db, mir, msgr, npc, xon,
10543 cols#80, it#8, lines#60, lm#0,
10544 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10545 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10546 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10547 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10548 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10549 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10550 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10551 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10552 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10553 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10554 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10555 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10556 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10557 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10558 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10559 rmul=\E[m, rs2=\Ec, sc=\E7,
10560 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10561 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10562 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10563 lines#24, use=att630,
10565 # This is the att700 entry for 700 native emulation of the AT&T 700
10566 # terminal. Comments are relative to changes from the 605V2 entry and
10567 # att730 on which the entry is based. Comments show the terminfo
10568 # capability name, termcap name, and description.
10570 # Here is what's going onm in the init string:
10571 # ESC [ 50;4| set 700 native mode (really is 605)
10572 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
10573 # ESC [ 53;0| set GenFlow to Xon/Xoff
10574 # ESC [ 8 ;0| set CR on NL
10575 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
10576 # ESC [ ? 4 l jump scroll
10577 # ESC [ ? 5 l/h video: normal (l); reverse (h)
10578 # ESC [ ?13 l Labels on
10579 # ESC [ ?15 l parity check = no
10580 # ESC [ 13 l monitor mode off
10581 # ESC [ 20 l LF on NL (not CRLF on NL)
10582 # ESC [ ? 7 h autowrap on
10583 # ESC [ 12 h local echo off
10584 # ESC ( B GO = ASCII
10585 # ESC ) 0 G1 = Special Char & Line Drawing
10586 # ESC [ ? 31 l Set 7 bit controls
10588 # Note: Most terminals, especially the 600 family use Reverse Video for
10589 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
10590 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
10591 # standout mode with \E[m (all normal attributes). The 730 entry simply
10592 # exits reverse video which would leave other current attributes intact. It
10593 # was assumed the 730 entry to be more correct so rmso has changed. The
10594 # 605V2 has no sequences to turn individual attributes off, thus its setting
10595 # and the rmso/smso settings from the 730.
10597 # Note: For the same reason as above in rmso I changed exit under-score mode
10598 # to specifically turn off underscore, rather than return to all normal
10601 # Note: The following pkey_xmit is taken from the 605V2 which contained the
10602 # capability as pfxl. It was changed here to pfx since pfxl
10603 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
10604 # allows strings to be parameters and label values must be programmed as
10605 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
10606 # and strings to be parameters. The 605V2 pfx entry should be examined later
10607 # in this regard. For reference the 730 pfxl entry is shown here for comparison
10609 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
10610 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
10613 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10616 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10618 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
10622 # modular 10 pin Connector
10623 # Left side Right side
10624 # Pin 1 2 3 4 5 6 7 8 9 10
10626 # Key (notch) at bottom
10638 # The manual is 189 pages and is loaded with details about the escape codes,
10639 # etc..... Available from AT&T CIC 800-432-6600...
10640 # ask for Document number 999-300-660..
10642 att700|AT&T 700 24x80 column display w/102key keyboard,
10643 am, eslok, hs, mir, msgr, xenl, xon,
10644 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10645 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10646 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10647 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10648 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10649 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10650 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10651 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10652 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10653 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
10654 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10655 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
10656 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
10657 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
10658 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10659 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
10660 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
10661 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
10662 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
10663 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
10664 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
10665 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
10666 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10667 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
10668 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10669 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
10670 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10671 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10672 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10673 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10674 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
10675 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
10676 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10677 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
10678 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
10679 tsl=\E7\E[99;%i%p1%dx,
10681 # This entry was modified 3/13/90 by JWE.
10682 # fixes include additions of <enacs>, correcting <rep>, and modification
10683 # of <kHOM>. (See comments below)
10684 # att730 has status line of 80 chars
10685 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
10686 # the <kf25> and up keys are used for shifted system Fkeys
10687 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
10688 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
10689 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
10690 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
10691 # 102, 102+1, or 122 key keyboards
10693 # (att730: I added <rmam>/<smam> based on the init string -- esr)
10694 att730|AT&T 730 windowing terminal,
10695 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
10696 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
10697 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10698 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10699 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10700 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10701 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10702 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10703 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10704 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10705 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10706 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
10707 ind=\ED, invis=\E[8m,
10708 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
10709 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10710 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10711 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10712 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
10713 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
10714 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
10715 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
10716 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
10717 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
10718 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
10719 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
10720 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10721 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
10722 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10723 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
10724 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
10725 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10726 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10727 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
10728 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
10729 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10730 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10731 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
10732 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
10733 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
10734 lines#41, use=att730,
10735 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
10736 lines#24, use=att730,
10737 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
10738 flash=\E[?5l$<200>\E[?5h,
10739 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
10741 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
10742 lines#41, use=att730r,
10743 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
10744 lines#24, use=att730r,
10746 # The following represents the screen layout along with the associated
10747 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
10748 # not appear on the screen but are shown to reference the bezel buttons.
10749 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
10750 # position relative to the screen.
10754 # +----------------------------------------------------------------+
10756 # XXXX | kf0 kf24 | XXXX
10759 # XXXX | kf1 kf23 | XXXX
10762 # XXXX | kf2 kf22 | XXXX
10765 # XXXX | kf3 kf21 | XXXX
10768 # XXXX | kf4 kf20 | XXXX
10771 # XXXX | kf5 kf19 | XXXX
10774 # XXXX | kf6 kf18 | XXXX
10780 # +----------------------------------------------------------------+
10782 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
10784 # Note: XXXX represents the screen buttons
10790 # The character string sent by key 'kf26' may be user programmable
10791 # to send either \E[16s, or \E[26s.
10792 # The character string sent by key 'krfr' may be user programmable
10793 # to send either \E[17s, or \E[27s.
10795 # Depression of the "CMD" key sends \E! (kcmd)
10796 # Depression of the "MAIL" key sends \E[26s (kf26)
10797 # "REDRAW" same as "REFRESH" (krfr)
10799 # "kf" functions adds carriage return to output string if terminal is in
10802 # The following are functions not covered in the table above:
10804 # Set keyboard character (SKC): \EPn1;Pn2w
10805 # Pn1= 0 Back Space key
10807 # Pn2= Program char (hex)
10809 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
10810 # Pn1= Window number (1-39)
10811 # Pn2-Pn5= Y;X;Y;X coordinates
10813 # Screen Selection (SSL): \E[Pnu
10814 # Pn= Window number
10816 # Set Terminal Modes (SM): \E[Pnh
10817 # Pn= 3 Graphics mode
10818 # Pn= > Cursor blink
10819 # Pn= < Enter new line mode
10820 # Pn= = Enter reverse insert/replace mode
10821 # Pn= ? Enter no scroll mode
10823 # Reset Terminal Mode (RM): \E[Pnl
10824 # Pn= 3 Exit graphics mode
10825 # Pn= > Exit cursor blink
10826 # Pn= < Exit new line mode
10827 # Pn= = Exit reverse insert/replace mode
10828 # Pn= ? Exit no scroll mode
10830 # Screen Status Report (SSR): \E[Pnp
10831 # Pn= 0 Request current window number
10832 # Pn= 1 Request current window dimensions
10834 # Device Status Report (DSR): \E[6n Request cursor position
10836 # Call Status Report (CSR): \E[Pnv
10837 # Pn= 0 Call failed
10838 # Pn= 1 Call successful
10840 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
10841 # Pn1= Button number to be loaded
10842 # Pn2= Character count of "string"
10843 # Pn3= Key mode being loaded:
10847 # String= Text string (15 chars max)
10849 # Screen Number Report (SNR): \E[Pnp
10850 # Pn= Screen number
10852 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
10853 # Pn1= Number of rows available in window
10854 # Pn2= Number of columns available in window
10856 # Cursor Position Report (CPR): \E[Pn1;Pn2R
10857 # Pn1= "Y" Position of cursor
10858 # Pn2= "X" Position of cursor
10860 # Request Answer Back (RAB): \E[c
10862 # Answer Back Response (ABR): \E[?;*;30;VSV
10863 # *= 0 No printer available
10864 # *= 2 Printer available
10865 # V= Software version number
10866 # SV= Software sub version number
10867 # (printer-available field not documented in v1)
10869 # Screen Alignment Aid: \En
10871 # Bell (lower pitch): \E[x
10873 # Dial Phone Number: \EPdstring\
10874 # string= Phone number to be dialed
10876 # Set Phone Labels: \EPpstring\
10877 # string= Label for phone buttons
10879 # Set Clock: \EPchour;minute;second\
10881 # Position Clock: \EPsY;X\
10882 # Y= "Y" coordinate
10883 # X= "X" coordinate
10885 # Delete Clock: \Epr\
10887 # Programming The Function Buttons: \EPfPn;string\
10888 # Pn= Button number (00-06, 18-24)
10889 # (kf00-kf06, kf18-kf24)
10890 # string= Text to sent on button depression
10892 # The following in version 2 only:
10894 # Request For Local Directory Data: \EPp12;\
10896 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
10898 # Request for Local Directory Data in print format: \EPp13;\
10900 # Enable 'Prt on Line' mode: \022 (DC2)
10902 # Disable 'Prt on Line' mode: \024 (DC4)
10906 # The following Terminfo entry describes functions which are supported by
10907 # the AT&T 5430/pt505 terminal software version 2 and later.
10908 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
10910 cols#80, it#8, lines#24,
10911 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10912 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
10913 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
10914 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10915 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10916 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10917 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
10918 il=\E[%p1%dL, il1=\E[L, ind=^J,
10919 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
10920 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10921 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
10922 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
10923 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
10924 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
10925 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10926 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
10927 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
10928 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
10930 # The following Terminfo entry describes functions which are supported by
10931 # the AT&T 5430/pt505 terminal software version 1.
10932 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
10934 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
10935 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
10936 lines#22, use=att505,
10938 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
10939 # This cut mark helps make life less painful for people running ncurses tic
10940 # on machines with relatively little RAM. The file can be broken in half here
10941 # cleanly and compiled in sections -- no `use' references cross this cut
10945 #### Ampex (Dialogue)
10947 # Yes, these are the same people who are better-known for making audio- and
10948 # videotape. I'm told they are located in Redwood City, CA.
10951 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
10952 # (ampex80: some capabilities merged in from SCO's entry -- esr)
10953 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
10955 cols#80, it#8, lines#24,
10956 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
10957 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10958 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
10959 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
10960 smso=\Ej, smul=\El, tbc=\E3,
10961 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
10962 ampex175|ampex d175,
10965 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10966 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10967 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
10968 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
10969 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
10970 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
10971 # No backspace key in the main QWERTY cluster. Fortunately, it has a
10972 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
10973 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
10974 # mode), this key can be used as the erase key; I find I like this. Because
10975 # some people and some systems may not, there is another termcap ("ampex175")
10976 # that suppresses this little eccentricity by omitting the relevant capability.
10977 ampex175-b|ampex d175 using left arrow for erase,
10978 kbs=^_, use=ampex175,
10979 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
10980 # (ampex210: removed obsolete ":kn#10:" -- esr)
10981 ampex210|a210|ampex a210,
10982 OTbs, am, hs, xenl,
10983 cols#80, it#8, lines#24, xmc#1,
10984 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
10985 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10986 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
10987 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
10988 if=/usr/share/tabset/std, il1=\EE, invis@,
10989 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
10990 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10991 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10992 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
10993 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
10994 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
10995 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
10996 # and moved the padding to be *after* the caps -- esr)
10997 ampex219|ampex-219|amp219|Ampex with Automargins,
10999 cols#80, it#8, lines#24,
11000 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
11001 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
11002 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
11003 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
11004 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
11005 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
11006 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11007 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
11008 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
11009 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
11010 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
11011 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
11012 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
11013 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
11014 cols#132, lines#24,
11015 bel=^G, cr=^M, cud1=^J, ind=^J,
11016 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11017 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
11018 ampex232|ampex-232|Ampex Model 232,
11020 cols#80, lines#24, xmc#1,
11021 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
11022 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11023 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
11024 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
11025 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
11026 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
11027 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
11028 kf9=^AI\r, khome=^^, use=adm+sgr,
11029 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
11030 ampex232w|Ampex Model 232 / 132 columns,
11031 cols#132, lines#24,
11032 is2=\E\034Eg\El, use=ampex232,
11034 #### Ann Arbor (aa)
11036 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11037 # numbers of function keys. At least some used monitors in portrait mode,
11038 # allowing up to 76-character screen heights! They were reachable at:
11040 # Ann Arbor Terminals
11041 # 6175 Jackson Road
11042 # Ann Arbor, MI 48103
11045 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
11046 # can't be found on the Web; I fear they're long dead. R.I.P.
11050 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
11051 # Highly modified 6/22 by Mike O'Brien.
11052 # split out into several for the various screen sizes by dave-yost@rand
11053 # Modifications made 3/82 by Mark Horton
11054 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
11055 # status line moved to top of screen, <flash> removed 5/82
11056 # Some unknown person at SCO then hacked the init strings to make them more
11059 # assumes the following setup:
11060 # A menu: 0000 1010 0001 0000
11061 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11062 # C menu: 56 66 0 0 9600 0110 1100
11063 # D menu: 0110 1001 1 0
11065 # Briefly, the settings are for the following modes:
11066 # (values are for bit set/clear with * indicating our preference
11067 # and the value used to test these termcaps)
11068 # Note that many of these settings are irrelevent to the terminfo
11069 # and are just set to the default mode of the terminal as shipped
11072 # A menu: 0000 1010 0001 0000
11073 # Block/underline cursor*
11074 # blinking/nonblinking cursor*
11075 # key click/no key click*
11076 # bell/no bell at column 72*
11078 # key pad is cursor control*/key pad is numeric
11079 # return and line feed/return for <cr> key *
11080 # repeat after .5 sec*/no repeat
11081 # repeat at 25/15 chars per sec. *
11083 # hold data until pause pressed/process data unless pause pressed*
11084 # slow scroll/no slow scroll*
11085 # Hold in area/don't hold in area*
11086 # functions keys have default*/function keys disabled on powerup
11088 # show/don't show position of cursor during page transmit*
11093 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11094 # Baud rate (9600*)
11096 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
11097 # 1 stop bit*/2 stop bits
11098 # parity error detection off*/on
11100 # keyboard local/on line*
11101 # half/full duplex*
11102 # disable/do not disable keyboard after data transmission*
11104 # transmit entire page/stop transmission at cursor*
11105 # transfer/do not transfer protected characters*
11106 # transmit all characters/transmit only selected characters*
11107 # transmit all selected areas/transmit only 1 selected area*
11109 # transmit/do not transmit line separators to host*
11110 # transmit/do not transmit page tab stops tabs to host*
11111 # transmit/do not transmit column tab stop tabs to host*
11112 # transmit/do not transmit graphics control (underline,inverse..)*
11114 # enable*/disable auto XON/XOFF control
11115 # require/do not require receipt of a DC1 from host after each LF*
11116 # pause key acts as a meta key/pause key is pause*
11124 # XON character (17*)
11125 # XOFF character (19*)
11127 # C menu: 56 66 0 0 9600 0110 1100
11128 # number of lines to print data on (printer) (56*)
11130 # number of lines on a sheet of paper (printer) (66*)
11132 # left margin (printer) (0*)
11134 # number of pad chars on new line to printer (0*)
11136 # printer baud rate (9600*)
11138 # printer parity: 00=odd,01=even*,10=space,11=mark
11139 # printer stop bits: 2*/1
11140 # print/do not print guarded areas*
11142 # new line is: 01=LF,10=CR,11=CRLF*
11146 # D menu: 0110 1001 1 0
11147 # LF is newline/LF is down one line, same column*
11148 # wrap to preceding line if move left from col 1*/don't wrap
11149 # wrap to next line if move right from col 80*/don't wrap
11150 # backspace is/is not destructive*
11152 # display*/ignore DEL character
11153 # display will not/will scroll*
11154 # page/column tab stops*
11155 # erase everything*/erase unprotected only
11157 # editing extent: 0=display,1=line*,2=field,3=area
11162 annarbor4080|aa4080|ann arbor 4080,
11165 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11166 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11167 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11168 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11170 # Strange Ann Arbor terminal from BRL
11171 aas1901|Ann Arbor K4080 w/S1901 mod,
11174 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11175 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11178 # If you're using the GNU termcap library, add
11179 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11180 # to these capabilities. This is the nonstandard GNU termcap scrolling
11181 # capability, arguments are:
11182 # 1. Total number of lines on the screen.
11183 # 2. Number of lines above desired scroll region.
11184 # 3. Number of lines below (outside of) desired scroll region.
11185 # 4. Total number of lines on the screen, the same as the first parameter.
11186 # The generic Ann Arbor entry is the only one that uses this.
11187 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11188 OTbs, am, km, mc5i, mir, xon,
11190 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11191 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11192 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11193 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11194 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11195 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11196 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11197 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11198 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11199 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11200 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11201 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11202 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11203 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11204 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11205 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11206 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11207 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11208 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11209 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11210 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
11212 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11213 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11214 vpa=\E[%p1%{1}%+%dd,
11216 aaa+rv|ann arbor ambassador in reverse video,
11217 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11218 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11219 rs1=\E[H\E[7m\E[J$<156>,
11220 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11221 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11222 # Ambassador with the DEC option, for partial vt100 compatibility.
11223 aaa+dec|ann arbor ambassador in dec vt100 mode,
11224 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11225 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11226 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11228 aaa-18|ann arbor ambassador/18 lines,
11230 is2=\E7\E[60;0;0;18p\E8,
11231 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11233 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11234 use=aaa+rv, use=aaa-18,
11235 aaa-20|ann arbor ambassador/20 lines,
11237 is2=\E7\E[60;0;0;20p\E8,
11238 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11240 aaa-22|ann arbor ambassador/22 lines,
11242 is2=\E7\E[60;0;0;22p\E8,
11243 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11245 aaa-24|ann arbor ambassador/24 lines,
11247 is2=\E7\E[60;0;0;24p\E8,
11248 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11250 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11251 use=aaa+rv, use=aaa-24,
11252 aaa-26|ann arbor ambassador/26 lines,
11254 is2=\E7\E[60;0;0;26p\E8,
11255 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11256 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11257 aaa-28|ann arbor ambassador/28 lines,
11259 is2=\E7\E[60;0;0;28p\E8,
11260 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11261 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11262 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11265 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11266 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11267 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11268 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11269 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11270 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11271 use=aaa+rv, use=aaa-30-s,
11272 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11273 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11274 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11275 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11276 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11277 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11278 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11280 is2=\E7\E[60;0;0;30p\E8,
11281 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11282 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11283 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11284 use=aaa+rv, use=aaa-30,
11285 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11286 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11288 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11289 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11290 use=aaa+rv, use=aaa-30,
11291 aaa-36|ann arbor ambassador/36 lines,
11293 is2=\E7\E[60;0;0;36p\E8,
11294 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11295 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11296 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11297 use=aaa+rv, use=aaa-36,
11298 aaa-40|ann arbor ambassador/40 lines,
11300 is2=\E7\E[60;0;0;40p\E8,
11301 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11302 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11303 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11304 use=aaa+rv, use=aaa-40,
11305 aaa-48|ann arbor ambassador/48 lines,
11307 is2=\E7\E[60;0;0;48p\E8,
11308 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11309 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11310 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11311 use=aaa+rv, use=aaa-48,
11312 aaa-60-s|ann arbor ambassador/59 lines+status,
11315 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11316 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11317 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11318 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11319 use=aaa+rv, use=aaa-60-s,
11320 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11321 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11322 aaa-60|ann arbor ambassador/60 lines,
11324 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11326 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11327 use=aaa+rv, use=aaa-60,
11328 aaa-db|ann arbor ambassador 30/destructive backspace,
11330 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11332 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11334 flash=\E[>59h$<100>\E[>59l,
11335 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11336 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11337 guru+rv|guru changes for reverse video,
11338 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11339 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11340 use=guru+rv, use=guru-33,
11341 guru+s|guru status line,
11343 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11344 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11345 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11346 guru-nctxt|guru with no saved context,
11347 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11348 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11350 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11351 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11352 guru-24|ann arbor guru 24 lines,
11354 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11356 guru-44|ann arbor guru 44 lines,
11358 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11360 guru-44-s|ann arbor guru/44 lines+status,
11362 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11363 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11364 guru-76|guru with 76 lines by 89 cols,
11366 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11368 guru-76-s|ann arbor guru/76 lines+status,
11370 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11371 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11372 guru-76-lp|guru-lp|guru with page bigger than line printer,
11373 cols#134, lines#76,
11374 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11376 guru-76-w|guru 76 lines by 178 cols,
11377 cols#178, lines#76,
11378 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11380 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11381 cols#178, lines#75,
11382 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11383 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11384 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11385 cols#178, lines#76,
11386 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11388 aaa-rv-unk|ann arbor unknown type,
11389 lh#0, lw#0, nlab#0,
11390 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11391 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11393 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11394 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11396 #### Applied Digital Data Systems (adds)
11398 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11399 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11400 # terminals was merged again. Then AT&T sold the terminal business to
11401 # SunRiver, which later changed its name to Boundless Technologies. The
11402 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11403 # as of early 1995) are at:
11405 # Boundless Technologies
11406 # 100 Marcus Boulevard
11407 # Hauppauge, NY 11788-3762
11408 # Vox: (800)-231-5445
11409 # Fax: (516)-342-7378
11410 # Web: http://boundless.com
11412 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11413 # In 1995 Boundless acquired DEC's terminals business.
11416 # Regent: lowest common denominator, works on all regents.
11417 # (regent: renamed ":bc:" to ":le:" -- esr)
11418 regent|Adds Regent Series,
11421 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11422 home=\EY\s\s, ind=^J, ll=^A,
11423 # Regent 100 has a bug where if computer sends escape when user is holding
11424 # down shift key it gets confused, so we avoid escape.
11425 regent100|Adds Regent 100,
11428 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11429 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11430 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11431 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11432 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11433 regent20|Adds Regent 20,
11434 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11436 regent25|Adds Regent 25,
11437 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11439 regent40|Adds Regent 40,
11441 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11442 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11443 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11444 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11445 smul=\E0`, use=regent25,
11446 regent40+|Adds Regent 40+,
11447 is2=\EB, use=regent40,
11448 regent60|regent200|Adds Regent 60,
11449 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11450 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11452 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11453 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11454 viewpoint|addsviewpoint|adds viewpoint,
11457 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11458 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11459 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11460 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11461 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11462 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11463 # Some viewpoints have bad ROMs that foo up on ^O
11464 screwpoint|adds viewpoint with ^O bug,
11465 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11467 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11468 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11469 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11470 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11471 # invis=01000100 and %c is the logical or of desired attributes.
11472 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11474 # Update by TD - 2004:
11476 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11478 # COMMANDS ASCII CODE
11480 # Address, Absolute ESC,=,row,column
11482 # Aux Port Enable ESC,@
11483 # Aux Port Disable ESC,A
11487 # Cursor forward FF
11490 # Cursor supress ETB
11491 # Cursor enable CAN
11492 # Erase to end of line ESC,T
11493 # Erase to end of page ESC,Y
11496 # Keyboard unlock SO
11497 # Read current cursor position ESC,?
11498 # Set Attribute ESC,0,x (see below for values of x)
11499 # Tag bit reset ESC,(
11500 # Tag bit set ESC,)
11501 # Transparent Print on ESC,3
11502 # Transparent Print off ESC,4
11508 # Half Intensity A 0101
11510 # Half Intensity Blinking C 0103
11511 # Reverse Video P 0120
11512 # Reverse Video Half Intensity Q 0121
11513 # Reverse Video Blinking R 0122
11514 # Reverse Video Half Intensity
11516 # Underlined ` 0140
11517 # Underlined Half Intensity a 0141
11518 # Underlined Blinking b 0142
11519 # Underlined Half Intensity
11521 # Video suppress D 0104
11522 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11524 cols#80, it#8, lines#24,
11525 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11526 cub1=^H, cud1=^J, cuf1=^L,
11527 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
11528 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
11529 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11530 nel=^M^J, rev=\E0P\E), rmso=\E(,
11531 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
11532 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
11533 vp60|viewpoint60|addsvp60|adds viewpoint60,
11536 # adds viewpoint 90 - from cornell
11537 # Note: emacs sends ei occasionally to insure the terminal is out of
11538 # insert mode. This unfortunately puts the viewpoint90 IN insert
11539 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
11540 # - :ei=:im=: must be present in the termcap translation.)
11541 # - <xhp> indicates glitch that attributes stick to location
11542 # - <msgr> means it's safe to move in standout mode
11543 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
11545 # Function key and label capabilities merged in from SCO.
11546 vp90|viewpoint90|adds viewpoint 90,
11547 OTbs, bw, msgr, xhp,
11549 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
11550 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
11551 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
11552 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
11553 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
11554 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11555 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
11556 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
11557 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
11558 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
11559 # Note: if return acts weird on a980, check internal switch #2
11560 # on the top chip on the CONTROL pc board.
11561 adds980|a980|adds consul 980,
11564 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
11565 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
11566 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
11567 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
11568 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
11570 #### C. Itoh Electronics
11572 # As of 1995 these people no longer make terminals (they're still in the
11573 # printer business). Their terminals were all clones of the DEC VT series.
11574 # They're located in Orange County, CA.
11577 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
11578 # the delay times and do an auto tab set rather than the indirect
11579 # file used in vt100.
11580 cit80|cit-80|citoh 80,
11583 clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
11584 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
11585 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11586 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
11587 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
11588 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
11589 cit101|citc|C.itoh fast vt100,
11592 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
11593 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
11594 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
11595 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
11596 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
11597 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11598 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
11599 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
11601 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
11602 # The following termcap entry was created from the Callan cd100 entry. The
11603 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
11604 # full selection of combinations of reverse video, underline, and blink.
11605 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
11606 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
11607 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
11608 cit101e|C. Itoh CIT-101e,
11609 OTbs, OTpt, am, mir, msgr,
11610 cols#80, it#8, lines#24,
11611 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
11612 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
11613 cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
11614 el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
11615 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
11616 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
11617 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
11618 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
11619 smkx=\E=, smso=\E[7m, smul=\E[4m,
11620 # From: David S. Lawyer, June 1997:
11621 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
11622 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
11623 # late 1980's CIT Terminals went out of business.
11624 # There is no need to use the initialization string is=... (by invoking
11625 # tset or setterm etc.) provided that the terminal has been manually set
11626 # up (and the setup saved with ^S) to be compatible with this termcap. To be
11627 # compatible it should be in ANSI mode (not VT52). A set-up that
11628 # works is to set all the manually setable stuff to factory defaults
11629 # by pressing ^D in set-up mode. Then increse the brighness with the
11630 # up-arrow key since the factory default will likely be dim on an old
11631 # terminal. Then change any options you want (provided that they are
11632 # compatible with the termcap). For my terminal I set: Screen
11633 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
11634 # on. I also set up mine for parity (but you may not need it). Then
11635 # save the setup with ^S.
11636 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
11637 cit101e-rv|Citoh CIT-101e (sets reverse video),
11638 am, eo, mir, msgr, xenl, xon,
11639 cols#80, it#8, lines#24,
11640 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11641 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
11642 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11643 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11644 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11645 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11646 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
11647 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11648 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11649 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
11650 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11651 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
11652 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
11653 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
11654 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
11655 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
11656 u7=\E[6n, u8=\E[?6c, u9=\E[c,
11657 cit101e-n|CIT-101e w/o am,
11659 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11661 cit101e-132|CIT-101e with 132 cols,
11663 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
11664 cit101e-n132|CIT-101e with 132 cols w/o am,
11667 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11669 # CIE Terminals CIT-500 from BRL
11670 # The following SET-UP modes are assumed for normal operation:
11671 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
11672 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
11673 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
11674 # Other SET-UP modes may be set for operator convenience or communication
11676 # Hardware tabs are assumed to be set every 8 columns; they can be set up
11677 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
11678 # "stty ixon -ixany" to enable DC3/DC1 flow control!
11679 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
11680 cit500|CIE Terminals CIT-500,
11681 OTbs, OTpt, mir, msgr, xon,
11682 OTkn#10, cols#80, it#8, lines#64, vt#3,
11683 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11684 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11685 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11686 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11687 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11688 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
11689 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
11690 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
11691 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
11692 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
11693 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
11694 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
11695 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
11696 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
11697 rmso=\E[m, rmul=\E[m,
11698 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
11699 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
11700 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11702 # C. Itoh printers begin here
11703 citoh|ci8510|8510|c.itoh 8510a,
11706 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
11707 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
11709 citoh-pica|citoh in pica,
11710 is1=\EN, use=citoh,
11711 citoh-elite|citoh in elite,
11714 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
11716 citoh-comp|citoh in compressed,
11719 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
11721 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
11722 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
11724 is1=\EP, use=citoh,
11725 citoh-6lpi|citoh in 6 lines per inch mode,
11726 is3=\EA, use=citoh,
11727 citoh-8lpi|citoh in 8 lines per inch mode,
11729 is3=\EB, use=citoh,
11731 #### Control Data (cdc)
11734 cdc456|cdc 456 terminal,
11737 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11738 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
11739 el=^V, home=^Y, il1=\EL, ind=^J,
11741 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
11745 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11746 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11747 kcuu1=^W, khome=^Y,
11748 cdc721ll|CDC Vikingll,
11750 cols#132, lines#24,
11751 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11752 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11753 kcuu1=^W, khome=^Y,
11754 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
11758 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11759 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
11760 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
11762 # The following switch/key settings are assumed for normal operation:
11763 # 96 chars SCROLL FULL duplex not BLOCK
11764 # Other switches may be set according to communication requirements.
11765 # Insert/delete-character cannot be used, as the whole display is affected.
11766 # "so" & "se" are commented out until jove handles "sg" correctly.
11769 OTkn#10, cols#80, lines#24,
11770 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11771 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
11772 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
11773 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
11774 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
11775 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
11776 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
11777 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
11778 rs1=\031\030\002\003\017,
11780 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
11782 # Part of the long initialization string defines the "DOWN" key to the left
11783 # of the tab key to send an ESC. The real ESC key is positioned way out
11786 # The termcap won't work in 132 column mode due to the way it it moves the
11787 # cursor. Termcap doesn't have the capability (as far as I could tell) to
11788 # handle the 721 in 132 column mode.
11790 # (cdc721: changed :ri: to :sr: -- esr)
11791 cdc721-esc|Control Data 721,
11792 OTbs, OTpt, am, bw, msgr, xon,
11793 OTkn#10, cols#80, it#8, lines#30,
11794 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
11795 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
11796 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
11797 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
11798 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
11799 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
11800 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
11801 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
11802 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
11803 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
11804 smso=^^D, smul=^\, tbc=^^^RY,
11808 # Getronics is a Dutch electronics company that at one time was called
11809 # `Geveke' and made async terminals; but (according to the company itself!)
11810 # they've lost all their documentation on the command set. The hardware
11811 # documentation suggests the terminals were actually manufactured by a
11812 # Taiwanese electronics company named Cal-Comp. There are known
11813 # to have been at least two models, the 33 and the 50.
11816 # The 50 seems to be a top end vt220 clone, with the addition of a higher
11817 # screen resolution, a larger screen, at least 1 page of memory above and
11818 # below the screen, apparently pages of memory right and left of the screen
11819 # which can be panned, and about 75 function keys (15 function keys x normal,
11820 # shift, control, func A, func B). It also has more setup possibilities than
11821 # the vt220. The monitor case is dated November 1978 and the keyboard case is
11824 # The vt100 emulation works as is. The entry below describes the rather
11825 # non-conformant (but more featureful) ANSI mode.
11827 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
11828 visa50|geveke visa 50 terminal in ansi 80 character mode,
11831 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
11832 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
11833 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11834 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11835 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11836 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
11837 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
11838 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11839 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
11840 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
11841 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
11842 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
11843 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
11844 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
11845 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
11846 lf3=A insert line, lf4=A delete line, lf5=A clear,
11847 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
11848 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
11849 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
11850 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
11851 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
11854 #### Human Designed Systems (Concept)
11856 # Human Designed Systems
11858 # King of Prussia, PA 19406
11859 # Vox: (610)-277-8300
11860 # Fax: (610)-275-5739
11861 # Net: support@hds.com
11863 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
11864 # the character-terminal business now (1995) and making X terminals. In
11865 # particular, the whole `Concept' line described here was discontinued long
11869 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
11870 # Extensive changes to c108 by arpavax:eric Feb 1982
11871 # Some unknown person at SCO then translated it to terminfo.
11873 # There seem to be a number of different versions of the C108 PROMS
11874 # (with bug fixes in its Z-80 program).
11876 # The first one that we had would lock out the keyboard of you
11877 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
11878 # Try that on your C108 and see if it sends a ^S when you type it.
11879 # If so, you have an old version of the PROMs.
11881 # You should configure the C108 to send ^S/^Q before running this.
11882 # It is much faster (at 9600 baud) than the c100 because the delays
11884 # new status line display entries for c108-8p:
11885 # <is3> - init str #3 - setup term for status display -
11886 # set programmer mode, select window 2, define window at last
11887 # line of memory, set bkgnd stat mesg there, select window 0.
11889 # <tsl> - to status line - select window 2, home cursor, erase to
11890 # end-of-window, 1/2 bright on, goto(line#0, col#?)
11892 # <fsl> - from status line - 1/2 bright off, select window 0
11894 # <dsl> - disable status display - set bkgnd status mesg with
11897 # There are probably more function keys that should be added but
11898 # I don't know what they are.
11900 # No delays needed on c108 because of ^S/^Q handshaking
11902 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
11903 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
11904 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
11905 c108-4p|concept108-4p|concept 108 w/4 pages,
11906 OTbs, eslok, hs, xon,
11908 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
11909 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
11910 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
11911 ind=^J, is1=\EK\E!\E F,
11912 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
11913 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
11914 smcup=\EU\Ev 8p\Ep\r\E\025,
11915 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
11916 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
11917 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
11919 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
11920 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
11922 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
11924 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
11925 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
11928 # These have only window relative cursor addressing, not screen
11929 # relative. To get it to work right here, smcup/rmcup (which
11930 # were invented for the concept) lock you into a one page
11931 # window for screen style programs.
11933 # To get out of the one page window, we use a clever trick:
11934 # we set the window size to zero ("\Ev " in rmcup) which the
11935 # terminal recognizes as an error and resets the window to all
11938 # This trick works on c100 but does not on c108, sigh.
11940 # Some tty drivers use cr3 for concept, others use nl3, hence
11941 # the delays on cr and ind below. This padding is only needed at
11942 # 9600 baud and up. One or the other is commented out depending on
11943 # local conventions.
11945 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
11946 # less than 6 but more than 2 will work.
11948 # Note: can't use function keys f7-f10 because they are
11949 # indistinguishable from arrow keys (!), also, del char and
11950 # clear eol use xon/xoff so they probably won't work very well.
11952 # Also note that we don't define insrt/del char/delline/eop/send
11953 # because they don't transmit unless we reset them - I figured
11954 # it was a bad idea to clobber their definitions.
11956 # The <mc5> sequence changes the escape character to ^^ so that
11957 # escapes will be passed through to the printer. Only trouble
11958 # is that ^^ won't be - ^^ was chosen to be unlikely.
11959 # Unfortunately, if you're sending raster bits through to be
11960 # plotted, any character you choose will be likely, so we lose.
11962 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
11963 # cannot be # in is2 because it will hang a c100 with no printer
11965 c100|concept100|concept|c104|c100-4p|hds concept 100,
11966 OTbs, am, eo, mir, ul, xenl,
11967 cols#80, lines#24, pb#9600, vt#8,
11968 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
11969 cub1=^H, cud1=^J, cuf1=\E=,
11970 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
11971 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
11972 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
11973 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
11975 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
11976 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
11977 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
11978 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
11979 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
11980 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
11981 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
11982 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
11983 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
11984 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
11985 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
11986 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
11987 smso=\ED, smul=\EG,
11988 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
11989 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
11990 smso=\EE, use=c100,
11991 oc100|oconcept|c100-1p|old 1 page concept 100,
11995 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
11996 # Lots of notes, originally inline, but ncurses doesn't grok that.
11998 # am: not available in power on mode, but turned on with \E[=107;207h in
11999 # is2=. Also, \E=124l in is2= could have been used to prevent needing
12000 # to specify xenl:, but that would have rendered the last space on the
12001 # last line useless.
12002 # bw: Not available in power on mode, but turned on with \E[=107;207h in
12004 # clear: Could be done with \E[2J alone, except that vi (and probably most
12005 # other programs) assume that this also homes the cursor.
12006 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12007 # scroll the window, and go back to window 1.
12008 # is2: the string may cause a warning to be issued by tic that it
12009 # found a very long line and that it suspects that a comma is missing
12010 # somewhere. This warning can be ignored (unless it comes up more than
12011 # once). The initialization string contains the following commands:
12013 # [Setup mode items changed from factory defaults:]
12014 # \E)0 set alternate character set to
12016 # ^O set character set to default
12017 # [In case it wasn't]
12018 # \E[m turn off all attributes
12019 # [In case they weren't off]
12020 # \E[=107; cursor wrap and
12021 # 207h character wrap on
12022 # \E[90;3u set Fkey definitions to "transmit"
12024 # \E[92;3u set cursor key definitions to
12025 # "transmit" defaults
12026 # \E[43;1u set shift F13 to transmit...
12028 # \E[44;1u set shift F14 to transmit...
12030 # \E[45;1u set shift F15 to transmit...
12032 # \E[46;1u set shift F16 to transmit...
12034 # \E[200;1u set shift up to transmit...
12036 # \E[201;1u set shift down to transmit...
12038 # \E[202;1u set shift right to transmit...
12040 # \E[203;1u set shift left to transmit...
12042 # \E[204;1u set shift home to transmit...
12044 # \E[212;1u set backtab to transmit...
12046 # \E[213;1u set shift backspace to transmit...
12048 # \E[214;1u set shift del to transmit...
12050 # [Necessary items not mentioned in setup mode:]
12051 # \E[2!w move to window 2
12052 # \E[25;25w define window as line 25 of memory
12053 # \E[!w move to window 1
12054 # \E[2*w show current line of window 2 as
12056 # \E[2+x set meta key to use high bit
12057 # \E[;3+} move underline to bottom of character
12059 # All Fkeys are set to their default transmit definitions with \E[90;3u
12060 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12061 # setting MUST be redefined or deactivated, because the default is
12062 # contained in almost all of this terminal's Fkey strings! If for some
12063 # reason "quit" cannot be altered, the Fkeys can, but it would be
12064 # necessary to change ^| to ^] in all of these definitions, and add
12065 # \E[2;029!t to is2.
12066 # lines: is set to 24 because this terminal refuses to treat the 25th
12068 # ll: Not available in power on mode, but turned on with \E[=107;207h in
12070 # lm: Pointless, given that this definition locks a single screen of
12071 # memory into view, but what the hey...
12072 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12073 # other attributes alone), but some programs expect this to turn off
12075 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12076 # attributes alone), but some programs expect this to turn off
12078 # sgr: Attributes are set on this terminal with the string \E[ followed by
12079 # a list of attribute code numbers (in decimal, separated by
12080 # semicolons), followed by the character m. The attribute code
12083 # 2 for dim (which is ignored in power on mode);
12087 # 8 for not displayable; and
12088 # =99 for protected (except that there are strange side
12089 # effects to protected characters which make them inadvisable).
12090 # The mapping of terminfo parameters to attributes is as follows:
12091 # %p1 (standout) = bold and inverse together;
12092 # %p2 (underline) = underline;
12093 # %p3 (reverse) = inverse;
12094 # %p4 (blink) = blinking;
12095 # %p5 (dim) is ignored;
12096 # %p6 (bold) = bold;
12097 # %p7 (invisible) = not displayable;
12098 # %p8 (protected) is ignored; and
12099 # %p9 (alt char set) = alt char set.
12100 # The code to do this is:
12102 # %?%p1%p6%O IF (standout; bold) OR
12103 # %t;1 THEN OUTPUT ;1
12105 # %?%p2 IF underline
12106 # %t;4 THEN OUTPUT ;4
12109 # %t;5 THEN OUTPUT ;5
12111 # %?%p1%p3%O IF (standout; reverse) OR
12112 # %t;7 THEN OUTPUT ;7
12114 # %?%p7 IF invisible
12115 # %t;8 THEN OUTPUT ;8
12118 # %?%p9 IF altcharset
12119 # %t^N THEN OUTPUT ^N
12120 # %e^O ELSE OUTPUT ^O
12122 # sgr0: Everything is turned off (including alternate character set), since
12123 # there is no way of knowing what it is that the program wants turned
12125 # smul: The "underline" attribute is reconfigurable to an overline or
12126 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
12127 # bottom of the character cell. This was done to allow for more readable
12128 # underlined characters, and to be able to distinguish between an
12129 # underlined space, an underscore, and an underlined underscore.
12130 # xenl: Terminal can be configured to not need this, but this "glitch"
12131 # behavior is actually preferable with autowrap terminals.
12133 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
12134 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
12135 # string modifies the 'O' in kf43 to kf46 to a '$'.
12137 # kcbt was originally ^I but redefined in is2=.
12138 # kHOM was \E[H originally but redefined in is2=, as were a number of
12140 # kDC was originally \177 but redefined in is2=.
12142 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
12143 # tsl: Go to window 2, then do an hpa=.
12145 #------- flash=\E[8;3!}^G\E[3;3!}
12146 #------- flash=\E[?5h$<100>\E[?5l
12147 # There are two ways to flash the screen, both of which have their drawbacks.
12148 # The first is to set the bell mode to video, transmit a bell character, and
12149 # set the bell mode back - but to what? There is no way of knowing what the
12150 # user's old bell setting was before we messed with it. Worse, the command to
12151 # set the bell mode also sets the key click volume, and there is no way to say
12152 # "leave that alone", or to know what it's set to, either.
12153 # The second way to do a flash is to set the screen to inverse video, pad for a
12154 # tenth of a second, and set it back - but like before, there's no way to know
12155 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12156 # it that way. The point is moot anyway, since vi (and probably other
12157 # programs) assume that by defining flash=, you want the computer to use it
12158 # INSTEAD of bel=, rather than as a secondary type of signal.
12160 #------- cvvis=\E[+{
12161 # The is the power on setting, which is also as visible as the cursor
12163 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12164 # Windowing is possible, but not defined here because it is also used to
12165 # emulate status line functions. Allowing a program to set a window could
12166 # clobber the status line or render it unusable. There is additional memory,
12167 # but screen scroll functions are destructive and do not make use of it.
12169 #------- dim= Not available in power on mode.
12170 # You have a choice of defining low intensity characters as "half bright" and
12171 # high intensity as "normal", or defining low as "normal" and high as "bold".
12172 # No matter which you choose, only one of either "half bright" or "bold" is
12173 # available at any time, so taking the time to override the default is
12176 #------- prot=\E[=0;99m
12177 # Not defined, because it appears to have some strange side effects.
12178 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12179 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12180 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12181 # Available, but making them available to programs is inadvisable.
12182 # The code to do this is:
12183 # %?%p1%{24}%< IF ((key; 24) <;
12184 # %p1%{30}%> ((key; 30) >;
12185 # %p1%{54}%< (key; 54) <
12188 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12189 # %t\E[ THEN OUTPUT \E[
12190 # %p1%d OUTPUT (key) as decimal
12191 # [next line applies to pfx only]
12195 # %p2%s OUTPUT (string) as string
12197 # [DEL chosen as delimiter, but could be any character]
12198 # [implied: ELSE do nothing]
12202 # Not defined since anything it might do could be done faster and easier with
12203 # either Meta-Shift-Reset or the main power switch.
12205 #------- smkx=\E[1!z
12206 #------- rmkx=\E[!z
12207 # These sequences apply to the cursor and setup keys only, not to the
12208 # numeric keypad. But it doesn't matter anyway, since making these
12209 # available to programs is inadvisable.
12210 # For the key definitions below, all sequences beginning with \E$ are
12211 # custom and programmed into the terminal via is2. \E$ also has no
12212 # meaning to any other terminal.
12214 #------- cmdch=\E[;%p1%d!t
12215 # Available, but making it available to programs is inadvisable.
12216 #------- smxon=\E[1*q
12217 # Available, but making it available to programs is inadvisable.
12218 # Terminal will send XON/XOFF on buffer overflow.
12219 #------- rmxon=\E[*q
12220 # Available, but making it available to programs is inadvisable.
12221 # Terminal will not notify on buffer overflow.
12222 #------- smm=\E[2+x
12224 # Available, but making them available to programs is inadvisable.
12227 # It's not made clear in the manuals, but based on other ansi/vt type
12228 # terminals, it's a good guess that this terminal is capable of both
12229 # "transparent print" (which doesn't copy data to the screen, and
12230 # therefore needs mc5i: specified to say so) and "auxilliary print"
12231 # (which does duplicate printed data on the screen, in which case mc4=
12232 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12234 hds200|Human Designed Systems HDS200,
12235 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
12236 cols#80, it#8, lines#24, lm#0,
12237 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12238 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12239 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12240 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12241 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12242 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12243 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12244 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12245 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12246 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12248 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12249 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12250 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12251 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12252 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12253 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12254 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12255 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12256 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12257 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12258 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12259 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12260 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12261 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12262 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12263 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12264 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
12265 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
12266 rmul=\E[m\017, sc=\E7,
12267 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12268 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12269 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12272 # <ht> through <el> included to specify padding needed in raw mode.
12273 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12274 avt-ns|concept avt no status line,
12275 OTbs, am, eo, mir, ul, xenl, xon,
12276 cols#80, it#8, lines#24, lm#192,
12277 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12278 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12279 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12280 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12281 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12282 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12283 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12284 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12285 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12286 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12287 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12288 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12289 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12290 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12291 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12292 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12293 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12294 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12295 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12297 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
12298 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
12299 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
12300 tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12301 avt-rv-ns|concept avt in reverse video mode/no status line,
12302 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12304 avt-w-ns|concept avt in 132 column mode/no status line,
12305 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12307 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12308 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12309 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12311 # Concept AVT with status line. We get the status line using the
12312 # "Background status line" feature of the terminal. We swipe the
12313 # first line of memory in window 2 for the status line, keeping
12314 # 191 lines of memory and 24 screen lines for regular use.
12315 # The first line is used instead of the last so that this works
12316 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12317 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12319 avt+s|concept avt status line changes,
12322 dsl=\E[0*w, fsl=\E[1;1!w,
12323 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12324 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12325 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12326 avt|avt-s|concept-avt|avt w/80 columns,
12327 use=avt+s, use=avt-ns,
12328 avt-rv|avt-rv-s|avt reverse video w/sl,
12329 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12330 use=avt+s, use=avt-ns,
12331 avt-w|avt-w-s|concept avt 132 cols+status,
12332 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12333 use=avt+s, use=avt-ns,
12334 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12335 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12336 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12338 #### Contel Business Systems.
12341 # Contel c300 and c320 terminals.
12342 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12344 cols#80, lines#24, xmc#1,
12345 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12346 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12347 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12348 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12349 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12350 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12351 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12352 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12353 # Contel c301 and c321 terminals.
12354 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12355 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12358 #### Data General (dg)
12360 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12361 # the terminals group at Data General was shut down in 1991; all these
12362 # terminals have thus been discontinued.
12364 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12365 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12366 # sequentially, first the unmodified key codes are listed as F1 through F15.
12367 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12368 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12369 # F46 through F60. This is done in the private "includes" below whose names
12370 # start with "dgkeys+".
12372 # DG terminals generally support 8 bit characters. For each of these terminals
12373 # two descriptions are supplied:
12374 # 1) A default description for 8 bits/character communications, which
12375 # uses the default DG international character set and keyboard codes.
12376 # 2) A description with suffix "-7b" for 7 bits/character communications.
12377 # This description must use the NON-DEFAULT native keyboard language.
12379 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12380 # Ctrl/Shift fdkeys (kf34-kf44).
12382 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12383 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12384 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12385 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12386 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12387 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12388 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12389 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12390 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12391 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12392 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12393 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12394 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12395 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12396 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12397 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12398 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12399 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12400 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12401 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12402 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12403 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12404 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12405 khome=\233H, kprt=\233i,
12407 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12408 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12409 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12410 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12411 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12412 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12413 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12414 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12415 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12416 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12417 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12418 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12419 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12420 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12421 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12422 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12423 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12424 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12425 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12427 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12428 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12429 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12430 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12431 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12432 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12433 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12434 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12435 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12436 kf8=^^x, kf9=^^y, khome=^H,
12438 dgkeys+15|Private entry describing 15 DG mode special keys,
12439 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12440 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12441 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12442 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12443 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12444 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12445 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12446 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12447 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12448 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12449 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12452 # Data General color terminals use the "Tektronix" color model. The total
12453 # number of colors varies with the terminal model, as does support for
12454 # attributes used in conjunction with color.
12456 # Removed u7, u8 definitions since they conflict with tack:
12457 # Preserve user-defined colors in at least some cases.
12459 # Default is ACM mode.
12460 # u8=^^F}20^^Fi^^F}21,
12462 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12464 colors#16, ncv#53, pairs#256,
12466 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12467 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12468 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12470 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12473 # Video attributes are coordinated using static variables set by "sgr", then
12474 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12475 # (D=dim, U=underline, B=blink, R=reverse.)
12476 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12478 colors#8, ncv#16, pairs#64,
12479 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12480 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12481 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12482 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12483 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12485 dg+color|Color info for Data General D470C terminals in ANSI mode,
12486 colors#16, ncv#53, pairs#256,
12487 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12488 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12489 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12490 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12493 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12495 colors#8, ncv#16, pairs#64,
12497 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12498 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12499 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12501 dgmode+color|Color info for Data General D470C terminals in DG mode,
12502 colors#16, pairs#256,
12503 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12504 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12507 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12509 colors#52, ncv#53, pairs#26,
12510 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
12511 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12512 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12513 scp=\036RG2%p1%02X,
12515 # Colors are in the order: normal, reverse, dim, dim + reverse.
12516 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12518 colors#52, ncv#53, pairs#26,
12519 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12520 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12521 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12522 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12524 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12525 # Initialization string 1 sets:
12526 # ^R - vertical scrolling enabled
12527 # ^C - blinking enabled
12528 dg-generic|Generic Data General terminal in DG mode,
12531 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12532 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
12533 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
12534 smul=^T, use=dgkeys+11,
12536 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
12537 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
12538 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
12539 # maybe they were originally nuls (which would fit).
12541 dg200|data general dasher 200,
12544 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12545 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
12546 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
12547 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
12548 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
12551 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
12552 dg210|dg-ansi|Data General 210/211,
12555 OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
12556 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
12557 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12558 nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
12560 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
12561 # courtesy of Carlos Rucalde of Vantage Software, Inc.
12562 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
12563 # I suspect the d200 function keys actually work on the dg211, check it out.)
12564 dg211|Data General d211,
12565 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
12566 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
12567 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
12569 # dg450 from Cornell (not official)
12570 dg450|dg6134|data general 6134,
12571 cub1@, cuf1=^X, use=dg200,
12574 # Note: lesser Dasher terminals will not work with vi because vi insists upon
12575 # having a command to move straight down from any position on the bottom line
12576 # and scroll the screen up, or a direct vertical scroll command. The 460 and
12577 # above have both, the D210/211, for instance, has neither. We must use ANSI
12578 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
12579 # backspace on all terminals. This is not so in DG mode.
12580 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
12581 # grounds that there is no matching ":ml:"
12582 # fixed garbled ":k9=\E[00\:z:" capability -- esr)
12583 dg460-ansi|Data General Dasher 460 in ANSI-mode,
12584 OTbs, am, msgr, ul,
12585 cols#80, it#8, lines#24,
12586 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
12587 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
12588 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12589 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
12590 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12591 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
12592 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
12593 kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
12594 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
12595 ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
12597 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
12598 # Data General 605x
12599 # Ought to work for a Model 6242, Type D210 as well as a 605x.
12600 # Note that the cursor-down key transmits ^Z. Job control users, beware!
12601 # This also matches a posted description of something called a `Dasher 100'
12602 # so there's a dg100 alias here.
12603 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
12604 dg6053-old|dg100|data general 6053,
12607 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
12608 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
12609 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
12610 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
12611 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
12612 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
12615 # (Some performance can be gained over the generic DG terminal type)
12616 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
12618 home=^P\0\0, ll=^P\0^W, use=dg-generic,
12620 # Like 6053, but adds reverse video and more keypad and function keys.
12621 d200|d200-dg|Data General DASHER D200,
12622 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
12623 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
12624 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
12627 # DASHER D210 series terminals in ANSI mode.
12628 # Reverse video, no insert/delete character/line, 7 bits/character only.
12630 # Initialization string 1 sets:
12631 # <0 - scrolling enabled
12632 # <1 - blink enabled
12633 # <4 - print characters regardless of attributes
12634 d210|d214|Data General DASHER D210 series,
12637 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
12638 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12639 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12640 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
12641 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
12642 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12643 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
12644 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
12646 # DASHER D210 series terminals in DG mode.
12647 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
12648 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
12650 ed=^^FF, use=d200-dg,
12652 # DASHER D211 series terminals in ANSI mode.
12653 # Like the D210, but with 8-bit characters and local printer support.
12655 # Initialization string 2 sets:
12657 # 2;1 - 8 bit operations
12658 # 1;1 - 8 bit (international) keyboard language
12659 # \E(B - default primary character set (U.S. ASCII)
12660 # \E)4 - default secondary character set (international)
12661 # ^O - primary character set
12663 d211|d215|Data General DASHER D211 series,
12665 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
12668 # Initialization string 2 sets:
12670 # 2;0 - 7 bit operations
12671 # 1;0 - 7 bit (native) keyboard language
12672 # \E(0 - default character set (the keyboard native language)
12673 # ^O - primary character set
12674 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
12676 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
12678 # Like the D210 series, but adds support for 8-bit characters.
12680 # Reset string 2 sets:
12681 # ^^N - secondary character set
12682 # ^^FS0> - 8 bit international character set
12683 # ^^O - primary character set
12684 # ^^FS00 - default character set (matching the native keyboard language)
12686 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
12688 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
12690 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
12693 # Enhanced DG mode with changes to be more UNIX compatible.
12694 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
12697 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
12698 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
12699 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
12700 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
12701 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
12702 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
12703 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
12704 rs2=\036N\036FS0E\036O\036FS00,
12705 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12706 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
12707 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
12708 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
12710 is3=\036Fz2, use=d216+,
12712 d217-unix|Data General DASHER D217 in DG-UNIX mode,
12714 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
12717 # DASHER D220 color terminal in ANSI mode.
12718 # Like the D470C but with fewer colors and screen editing features.
12720 # Initialization string 1 sets:
12722 # <0 - scrolling enabled
12723 # <1 - blink enabled
12724 # <4 - print characters regardless of attributes
12725 # \E[m - all attributes off
12726 # Reset string 1 sets:
12727 # \Ec - initial mode defaults (RIS)
12729 d220|Data General DASHER D220,
12731 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12732 use=dg+color8, use=d470c,
12734 d220-7b|Data General DASHER D220 in 7 bit mode,
12736 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12737 use=dg+color8, use=d470c-7b,
12739 # Initialization string 3 sets:
12740 # - default cursor (solid rectangle)
12741 # Reset string 2 sets:
12742 # ^^N - secondary character set
12743 # ^^FS0> - 8 bit international character set
12744 # ^^O - primary character set
12745 # ^^FS00 - default character set (matching the native keyboard language)
12747 d220-dg|Data General DASHER D220 color terminal in DG mode,
12749 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
12750 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
12753 # DASHER D230C color terminal in ANSI mode.
12754 # Like the D220 but with minor ANSI compatibility improvements.
12756 d230c|d230|Data General DASHER D230C,
12757 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
12758 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
12759 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12760 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
12761 smul=\E[4;50m, use=dgkeys+7b, use=d220,
12763 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
12766 # DASHER D400/D450 series terminals.
12767 # These add intelligent features like insert/delete to the D200 series.
12769 # Initialization string 2 sets:
12770 # ^^FQ2 - default cursor (solid rectangle)
12771 # ^^FW - character protection disabled
12772 # ^^FJ - normal (80 column) mode
12773 # ^^F\^ - horizontal scrolling enabled (for alignment)
12774 # ^^FX004? - margins at columns 0 and 79
12775 # ^^F] - horizontal scrolling disabled
12776 # ^^O - primary character set
12777 # ^^FS00 - default character set (the keyboard native language)
12778 # - (should reset scrolling regions, but that glitches the screen)
12779 # Reset string 1 sets:
12780 # ^^FA - all terminal defaults except scroll rate
12781 # Reset string 2 sets:
12782 # ^^F] - horizontal scrolling disabled
12783 # ^^FT0 - jump scrolling
12785 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
12787 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
12788 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
12789 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
12790 ich1=^^J, il1=^^FH,
12791 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
12792 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
12793 rs1=^^FA, rs2=\036F]\036FT0,
12794 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
12795 sgr0=\017\025\035\036E\036O, smacs=^^N,
12796 vpa=\020\177%p1%c, use=d210-dg,
12798 # DASHER D410/D460 series terminals in ANSI mode.
12799 # These add a large number of intelligent terminal features.
12801 # Initialization string 1 sets:
12803 # <0 - scrolling enabled
12804 # <1 - blink enabled
12805 # <2 - horizontal scrolling enabled (for alignment)
12806 # <4 - print characters regardless of attributes
12807 # \E[5;0v - normal (80 column) mode
12808 # \E[1;1;80w - margins at columns 1 and 80
12810 # 1 - print all characters even if protected
12811 # 6 - character protection disabled
12812 # <2 - horizontal scrolling disabled
12813 # - (should reset scrolling regions, but that glitches the screen)
12815 # Initialization string 2 sets:
12817 # 3;2 - default cursor (solid rectangle)
12818 # 2;1 - 8 bit operations
12819 # 1;1 - international keyboard language
12820 # \E(B - default primary character set (U.S. ASCII)
12821 # \E)4 - default secondary character set (international)
12822 # ^O - primary character set
12824 # Reset string 1 sets:
12825 # \Ec - initial mode defaults (RIS)
12826 # \E[<2h - horizontal scrolling disabled
12828 # Reset string 2 sets:
12830 # 4;0 - jump scrolling
12831 # 2;1 - 8 bit operations
12832 # 1;1 - 8 bit (international) keyboard language
12833 # \E(B - default primary character set (U.S. ASCII)
12834 # \E)4 - default secondary character set (international)
12836 d410|d411|d460|d461|Data General DASHER D410/D460 series,
12838 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
12839 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12840 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
12841 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
12842 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
12843 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
12844 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
12845 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
12846 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
12848 # Initialization string 2 sets:
12850 # 3;2 - default cursor (solid rectangle)
12851 # 2;0 - 7 bit operations
12852 # 1;0 - 7 bit (native) keyboard language
12853 # \E(0 - default character set (the keyboard native language)
12854 # ^O - primary character set
12856 # Reset string 2 sets:
12858 # 4;0 - jump scrolling
12859 # 2;0 - 7 bit operations
12860 # 1;0 - 7 bit (native) keyboard language
12861 # \E(0 - default character set (the keyboard native language)
12863 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
12865 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
12866 rs2=\E[4;0;2;0;1;0v\E(0,
12867 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
12868 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
12870 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
12872 enacs@, rmacs=\036FS00,
12873 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12874 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
12877 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
12879 # Initialization string 1 sets:
12881 # <0 - scrolling enabled
12882 # <1 - blink enabled
12883 # <2 - horizontal scrolling enabled (for alignment)
12884 # <4 - print characters regardless of attributes
12885 # \E[5;1v - compressed (135 column) mode
12886 # \E[1;1;126 - margins at columns 1 and 126
12888 # 1 - print all characters even if protected
12889 # 6 - character protection disabled
12890 # <2 - horizontal scrolling disabled
12891 # - (should reset scrolling regions, but that glitches the screen)
12893 # Reset string 1 sets:
12894 # \Ec - initial mode defaults (RIS)
12895 # \E[5;1v - compressed (135 column) mode
12896 # \E[1;1;126w - margins at columns 1 and 126
12897 # \E[<2h - horizontal scrolling disabled
12899 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
12901 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12902 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
12904 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
12906 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12907 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
12909 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
12912 # These add intelligent features like scrolling regions.
12913 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
12914 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
12915 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
12916 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
12917 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
12918 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
12919 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
12920 vpa=\036FPFF%p1%2.2X,
12921 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12923 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
12925 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
12926 rs2=\036P@1\036FK\036FX0083,
12927 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
12929 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
12932 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12934 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
12936 clear=\036FG\036PH, fsl=\036F}01\022,
12937 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
12938 tsl=\036F}00\036FP%p1%2.2X18\036PG,
12939 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
12942 # Relative cursor motions are confined to the current window,
12943 # which is not what the scrolling region specification expects.
12944 # Thus, relative vertical cursor positioning must be deleted.
12945 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
12946 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
12947 cud1@, cuu1@, ll@, use=d462+,
12949 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
12951 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
12953 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
12955 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
12957 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
12960 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
12962 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
12964 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
12966 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
12968 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
12971 d430c-dg|d430-dg|Data General D430C in DG mode,
12972 use=d413-dg, use=dg+fixed,
12973 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
12974 use=d413-dg, use=dg+ccc,
12976 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
12977 use=d413-unix, use=dgunix+fixed,
12978 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
12979 use=d413-unix-w, use=dgunix+fixed,
12980 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
12981 use=d413-unix-25, use=dgunix+fixed,
12982 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
12983 use=d413-unix-s, use=dgunix+fixed,
12984 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
12985 use=d413-unix-sr, use=dgunix+fixed,
12986 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
12987 use=d413-unix, use=dgunix+ccc,
12988 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
12989 use=d413-unix-w, use=dgunix+ccc,
12990 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
12991 use=d413-unix-25, use=dgunix+ccc,
12992 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
12993 use=d413-unix-s, use=dgunix+ccc,
12994 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
12995 use=d413-unix-sr, use=dgunix+ccc,
12997 # DASHER D470C color terminal in ANSI mode.
12998 # Like the D460 but with 16 colors and without a compressed mode.
13000 # Initialization string 1 sets:
13002 # <0 - scrolling enabled
13003 # <1 - blink enabled
13004 # <2 - horizontal scrolling enabled (for alignment)
13005 # <4 - print characters regardless of attributes
13006 # \E[1;1;80w - margins at columns 1 and 80
13008 # 1 - print all characters even if protected
13009 # 6 - character protection disabled
13010 # <2 - horizontal scrolling disabled
13011 # - (should reset scrolling regions, but that glitches the screen)
13013 d470c|d470|Data General DASHER D470C,
13014 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13015 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13016 use=dg+color, use=d460,
13018 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
13019 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13020 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
13021 use=dg+color, use=d460-7b,
13023 # Initialization string 2 sets:
13024 # ^^FQ2 - default cursor (solid rectangle)
13025 # ^^FW - character protection disabled
13026 # ^^F\^ - horizontal scrolling enabled (for alignment)
13027 # ^^FX004? - margins at columns 0 and 79
13028 # ^^F] - horizontal scrolling disabled
13029 # ^^O - primary character set
13030 # ^^FS00 - default character set (the keyboard native language)
13031 # - (should reset scrolling regions, but that glitches the screen)
13033 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
13034 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
13035 use=dgmode+color, use=d460-dg,
13037 # DASHER D555 terminal in ANSI mode.
13038 # Like a D411, but has an integrated phone.
13039 d555|Data General DASHER D555,
13041 d555-7b|Data General DASHER D555 in 7-bit mode,
13043 d555-w|Data General DASHER D555 in wide mode,
13045 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
13047 d555-dg|Data General DASHER D555 series in DG mode,
13050 # DASHER D577 terminal in ANSI mode.
13051 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
13052 d577|Data General DASHER D577,
13054 d577-7b|Data General DASHER D577 in 7-bit mode,
13056 d577-w|Data General DASHER D577 in wide mode,
13058 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
13061 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
13064 # DASHER D578 terminal.
13065 # Like a D577, but without compressed mode; like a D470C in this respect.
13067 # Initialization string 1 sets:
13069 # <0 - scrolling enabled
13070 # <1 - blink enabled
13071 # <2 - horizontal scrolling enabled (for alignment)
13072 # <4 - print characters regardless of attributes
13073 # \E[1;1;80w - margins at columns 1 and 80
13075 # 1 - print all characters even if protected
13076 # 6 - character protection disabled
13077 # <2 - horizontal scrolling disabled
13078 # - (should reset scrolling regions, but that glitches the screen)
13080 d578|Data General DASHER D578,
13081 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13082 d578-7b|Data General DASHER D578 in 7-bit mode,
13083 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13085 #### Datamedia (dm)
13087 # Datamedia was headquartered in Nashua, New Hampshire until it went
13088 # out of business in 1993, but the ID plates on the terminals referred
13089 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
13090 # manufacturer which threw out all information about the terminals.
13093 cs10|colorscan|Datamedia Color Scan 10,
13096 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13097 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13098 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13099 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
13100 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13101 cs10-w|Datamedia Color Scan 10 with 132 columns,
13103 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13105 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
13106 dm1520|dm1521|datamedia 1520,
13108 cols#80, it#8, lines#24,
13109 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13110 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13111 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
13113 # dm2500: this terminal has both <ich> and <smir>. Applications using
13114 # termcap/terminfo directly (rather than through ncurses) might be confused.
13115 dm2500|datamedia2500|datamedia 2500,
13118 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
13119 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
13120 dch1=\020\010\030\035$<10*>,
13121 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
13122 ich1=\020\034\030\035$<10*>,
13123 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
13124 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
13125 smdc=^P, smir=^P, smso=^N,
13126 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
13127 # also, has a meta-key.
13128 # From: <goldberger@su-csli.arpa>
13129 # (dmchat: ":MT:" changed to ":km:" -- esr)
13130 dmchat|dmchat version of datamedia 2500,
13132 dl1=\020\032\030\035$<2/>,
13133 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13134 # (dm3025: ":MT:" changed to ":km:" -- esr)
13135 dm3025|datamedia 3025a,
13137 cols#80, it#8, lines#24,
13138 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13139 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
13140 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
13141 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
13142 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
13143 smir=\EP, smso=\EO1,
13144 dm3045|datamedia 3045a,
13145 OTbs, am, eo, km@, ul, xenl,
13146 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
13147 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
13148 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
13149 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13151 # Datamedia DT80 soft switches:
13152 # 1 0=Jump 1=Smooth
13153 # Autorepeat 0=off 1=on
13154 # Screen 0=Dark 1=light
13155 # Cursor 0=u/l 1=block
13157 # 2 Margin Bell 0=off 1=on
13158 # Keyclick 0=off 1=on
13159 # Ansi/VT52 0=VT52 1=Ansi
13160 # Xon/Xoff 0=Off 1=On
13162 # 3 Shift3 0=Hash 1=UK Pound
13164 # Newline 0=Off 1=On
13165 # Interlace 0=Off 1=On
13167 # 4 Parity 0=Odd 1=Even
13168 # Parity 0=Off 1=On
13169 # Bits/Char 0=7 1=8
13170 # Power 0=60Hz 1=50Hz
13172 # 5 Line Interface 0=EIA 1=Loop
13173 # Aux Interface 0=EIA 1=Loop
13174 # Local Copy 0=Off 1=On
13177 # 6 Aux Parity 0=Odd 1=Even
13178 # Aux Parity 0=Off 1=On
13179 # Aux Bits/Char 0=7 1=8
13180 # CRT Saver 0=Off 1=On
13181 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13182 dm80|dmdt80|dt80|datamedia dt80/1,
13183 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13184 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13185 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13186 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13188 # except in 132 column mode, where it needs a little padding.
13189 # This is still less padding than the vt100, and you can always turn on
13190 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13192 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13194 clear=\E[H\E[2J$<50/>, cud1=^J,
13195 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13196 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13197 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13198 dt80-sas|Datamedia DT803/DTX for SAS usage,
13201 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13202 bel=^G, clear=^L, cr=^M,
13203 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13204 cub1=^H, cud1=\EB, cuf1=^\,
13205 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13206 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13207 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13208 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13209 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13210 smso=\E$2\004, tbc=\E'0,
13212 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13213 # These aren't end-all Excel termcaps; but do insert/delete char/line
13214 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13215 # The naming convention has been bent somewhat, with the use of E? (where
13216 # E is for 'Excel') as # a name. This was done to distinguish the entries
13217 # from the other Datamedias in use here, and yet to associate a model of
13218 # the Excel terminals with the regular datamedia terminals that share
13219 # major characteristics.
13220 excel62|excel64|datamedia Excel 62,
13221 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13222 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13224 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13225 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13226 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13228 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13229 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13230 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13231 smir=\E[4h, use=dt80,
13235 # Falco Data Products
13236 # 440 Potrero Avenue
13237 # Sunnyvale, CA 940864-196
13238 # Vox: (800)-325-2648
13239 # Fax: (408)-745-7860
13240 # Net: techsup@charm.sys.falco.com
13242 # Current Falco models as of 1995 are generally ANSI-compatible and support
13243 # emulations of DEC VT-series, Wyse, and Televideo types.
13246 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13247 # This terminal was released around 1983 and was discontinued long ago.
13248 # The standout and underline highlights are the same.
13249 falco|ts1|ts-1|falco ts-1,
13251 cols#80, it#8, lines#24,
13252 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13253 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13254 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13255 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13256 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13257 smir=\Eq, smso=\Eg1, smul=\Eg1,
13258 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13259 OTbs, am, da, db, mir, msgr, ul,
13260 cols#80, it#8, lines#24,
13261 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13262 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13263 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13264 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13265 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13266 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13267 smso=\Eg4, smul=\Eg1,
13268 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13269 ts100|ts100-sp|falco ts100-sp,
13270 am, mir, msgr, xenl, xon,
13271 cols#80, it#8, lines#24, vt#3,
13272 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13273 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13274 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13275 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13276 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13277 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13278 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13279 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13280 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13281 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13282 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13283 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13284 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13285 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13286 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13287 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13289 ts100-ctxt|falco ts-100 saving context,
13290 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13292 #### Florida Computer Graphics
13295 # Florida Computer Graphics Beacon System, using terminal emulator program
13296 # "host.com", as provided by FCG. This description is for an early release
13297 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13300 # From: David Bryant <cbosg!djb> 1/7/83
13301 beacon|FCG Beacon System,
13304 bel=\ESTART\r\E37\r\EEND\r$<1>,
13305 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13306 cub1=^H, cud1=^J, cuf1=\EV,
13307 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13308 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13309 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13310 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13311 rmul=\ESTART\r\E60\,0\r\EEND\r,
13312 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13313 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13314 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13315 smul=\ESTART\r\E60\,1\r\EEND\r,
13320 # The f1720a differences from ANSI: no auto margin, destructive
13321 # tabs, # of lines, funny highlighting and underlining
13322 f1720|f1720a|fluke 1720A,
13324 cols#80, lines#16, xmc#1,
13325 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13326 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13327 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13328 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13329 smso=\E[7m, smul=\E[4m,
13331 #### Liberty Electronics (Freedom)
13333 # Liberty Electronics
13334 # 48089 Fremont Blvd
13336 # Vox: (510)-623-6000
13337 # Fax: (510)-623-7021
13339 # From: <faletti@berkeley.edu>
13340 # (f100: added empty <acsc> to suppress a tic warning;
13341 # made this relative to adm+sgr -- note that <invis> isn't
13342 # known to work for f100 but does on the f110. --esr)
13343 f100|freedom|freedom100|freedom model 100,
13344 OTbs, am, bw, hs, mir, msgr, xon,
13346 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13347 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13348 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13349 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13350 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13351 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13352 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13353 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13354 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13355 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13356 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13357 f100-rv|freedom-rv|freedom 100 in reverse video,
13358 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13359 # The f110 and f200 have problems with vi(1). They use the ^V
13360 # code for the down cursor key. When kcud1 is defined in terminfo
13361 # as ^V, the Control Character Quoting capability (^V in insert mode)
13362 # is lost! It cannot be remapped in vi because it is necessary to enter
13363 # a ^V to to quote the ^V that is being remapped!!!
13365 # f110/f200 users will have to decide whether
13366 # to lose the down cursor key or the quoting capability. We will opt
13367 # initially for leaving the quoting capability out, since use of VI
13368 # is not generally applicable to most interactive applications
13369 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13370 f110|freedom110|Liberty Freedom 110,
13373 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13374 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13375 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13376 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13377 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13378 smso=\EG<, tsl=\Ef, use=f100,
13379 f110-14|Liberty Freedom 110 14inch,
13381 f110-w|Liberty Freedom 110 - 132 cols,
13382 cols#132, use=f110,
13383 f110-14w|Liberty Freedom 110 14in/132 cols,
13386 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13387 f200|freedom200|Liberty Freedom 200,
13388 OTbs, am, eslok, hs, mir, msgr, xon,
13389 cols#80, it#8, lines#24, wsl#80,
13390 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13391 clear=^Z, cnorm=\E.1, cr=^M,
13392 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13393 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13394 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13395 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13396 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13397 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13398 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13399 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13400 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13401 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13402 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13403 f200-w|Liberty Freedom 200 - 132 cols,
13404 cols#132, use=f200,
13405 # The f200 has the ability to reprogram the down cursor key. The key is
13406 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13407 # so powering the terminal off and on will not cause the change to be lost.
13408 f200vi|Liberty Freedom 200 for vi,
13409 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13410 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13411 cols#132, use=f200vi,
13415 # Graphon Corporation
13416 # 544 Division Street
13417 # Campbell, CA 95008
13418 # Vox: (408)-370-4080
13419 # Fax: (408)-370-5047
13420 # Net: troy@graphon.com (Troy Morrison)
13423 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13424 # including one odd hybrid that starts out life on power-up as a character
13425 # terminal, than can be switched to X graphics mode (driven over the serial
13426 # line) by an escape sequence. No info on this beast yet.
13427 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13428 go140|graphon go-140,
13430 cols#80, it#8, lines#24,
13431 clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
13432 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13433 ed=\E[J$<10/>, el=\E[K, ht=^I,
13434 if=/usr/share/tabset/vt100, il1=\E[L,
13435 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13436 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13437 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13438 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13439 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13440 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13441 go140w|graphon go-140 in 132 column mode,
13444 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13446 # Hacked up vt200 termcap to handle GO-225/VT220
13447 # From: <edm@nwnexus.WA.COM>
13448 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13449 go225|go-225|Graphon 225,
13450 OTbs, am, mir, xenl,
13451 cols#80, it#8, lines#25, vt#3,
13452 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13453 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13454 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13455 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13456 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13457 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13458 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13459 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13460 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13461 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13462 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13463 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13465 #### Harris (Beehive)
13467 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13468 # Their terminal group is ancient history now (1995) though the parent
13469 # company is still in business.
13472 # Beehive documentation is undated and marked Preliminary and has no figures
13473 # so we must have early Superbee2 (Model 600, according to phone conversation
13474 # with mfr.). It has proved reliable except for some missing padding
13475 # (notably after \EK and <nl> at bottom of screen).
13477 # The key idea is that AEP mode is poison for <cup> & that US's in
13478 # the local memory should be avoided like the plague. That means
13479 # that the 2048 character local buffer is used as 25 lines of 80
13480 # characters, period. No scrolling local memory, folks. It also
13481 # appears that we cannot use naked INS LINE feature since it uses
13482 # US. The sbi fakes <il1> with an 80-space insert that may be too
13483 # slow at low speeds; also spaces get converted to \040 which is
13484 # too long for some programs (not vi). DEL LINE is ok but slow.
13486 # The <nl> string is designed for last line of screen ONLY; cup to
13487 # 25th line corrects the motion inherent in scrolling to Page 1.
13489 # There is one understood bug. It is that the screen appears to
13490 # pop to a new (blank) page after a <nel>, or leave a half-line
13491 # ellipsis to a quad that is the extra 48 memory locations. The
13492 # data received is dumped into memory but not displayed. Not to
13493 # worry if <cup> is being used; the lines not displayed will be,
13494 # whenever the cursor is moved up there. Since <cup> is addressed
13495 # relative to MEMORY of window, nothing is lost; but beware of
13496 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13497 # therefore, is setenv MORE -c .
13499 # WARNING: Not all features tested.
13501 # Timings are assembled from 3 sources. Some timings may reflect
13502 # SB2/Model 300 that were used if more conservative.
13503 # Tested on a Model 600 at 1200 and 9600 bd.
13505 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13506 # placed on the keyboard and useless because of AEP, is made
13507 # into a backspace key. In use ESC must be pressed twice (to send)
13508 # and sending ^C must be prefixed by ESC to avoid that weird
13509 # transmit mode associated with ENTER key.
13511 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13512 # the screen, then it has dropped into ENTER mode; hit
13513 # RESET--ONLINE--!tset.
13515 # As delivered this machine has a FATAL feature that will throw
13516 # it into that strange transmit state (SPOW) if the space bar is
13517 # hit after a CR is received, but before receiving a LF (or a
13520 # The circuits MUST be modified to eliminate the SPOW latch.
13521 # This is done by strapping on chip A46 of the I/O board; cut
13522 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13523 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13524 # With this modification absurdly high timings on cr are
13527 # NOTE WELL that the rear panel switch should be set to CR/LF,
13530 sb1|beehive superbee,
13531 OTbs, am, bw, da, db, mir, ul, xsb,
13532 cols#80, lines#25, xmc#1,
13533 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
13534 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
13535 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
13536 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
13537 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
13538 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
13539 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
13540 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
13541 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
13542 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
13543 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
13544 smso=\E_1, smul=\E_0, tbc=\E3,
13545 sbi|superbee|beehive superbee at Indiana U.,
13547 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
13549 # Alternate (older) description of Superbee - f1=escape, f2=^C.
13550 # Note: there are at least 3 kinds of superbees in the world. The sb1
13551 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
13552 # The sb3 puts garbage on the bottom of the screen when you scroll with
13553 # the switch in the back set to CRLF instead of AEP. This description
13554 # is tested on the sb2 but should work on all with either switch setting.
13555 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
13556 # the other two if you want to try to hit that tiny escape key.
13557 # This description is tricky: being able to use cup depends on there being
13558 # 2048 bytes of memory and the hairy <nl> string.
13559 superbee-xsb|beehive super bee,
13561 cols#80, it#8, lines#25,
13562 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
13563 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
13564 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
13565 home=\EH, ht=^I, hts=\E1,
13566 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
13567 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
13568 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
13569 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
13570 # This loses on lines > 80 chars long, use at your own risk
13571 superbeeic|super bee with insert char,
13572 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
13573 sb2|sb3|fixed superbee,
13574 xsb@, use=superbee,
13576 #### Beehive Medical Electronics
13578 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
13579 # Regarding your question though; Beehive terminals weren't made by Harris.
13580 # They were made by Beehive Medical Electronics in Utah. They went out of
13581 # business in the early '80s.
13583 # (OK, then, I don't know why a couple of these say "harris beehive".)
13586 # Reports are that most of these Beehive entries (except superbee) have not
13587 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
13589 # (bee: <ich1> was empty, which is obviously bogus -- esr)
13590 beehive|bee|harris beehive,
13593 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13594 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13595 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
13596 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13597 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
13598 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
13599 smir=\EQ, smso=\EdP, smul=\Ed`,
13600 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
13601 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
13602 # look at those spaces in <rmso>/<smso>. Seems strange to me...
13603 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
13604 # really care, cook up one using ^F -- esr)
13605 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
13607 cols#80, it#8, lines#20,
13608 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
13609 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
13610 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
13611 beehive4|bh4|beehive 4,
13614 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
13615 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
13616 # There was an early Australian kit-built computer called a "Microbee".
13617 # It's not clear whether this is for one of those or for a relative
13619 microb|microbee|micro bee series,
13621 cols#80, it#8, lines#24,
13622 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13623 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13624 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
13625 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
13626 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
13627 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
13629 # 8675, 8686, and bee from Cyrus Rahman
13630 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
13631 ha8675|harris 8675,
13632 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
13633 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
13634 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
13635 kf8=\177, kf9=\Ee, use=bee,
13636 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
13638 ha8686|harris 8686,
13639 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
13640 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
13641 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
13642 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
13643 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
13648 # Hazeltine appears to be out of the terminal business as of 1995. These
13649 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
13650 # Harris. They have a hazeltine.com domain (but no web page there ) and can
13654 # 450 East Pulaski Road
13655 # Greenlawn, New York 11740
13657 # As late as 1993, manuals for the terminal product line could still be
13660 # TRW Customer Service Division
13663 # Fairfield, NJ 07007-2078
13665 # They're now (1998) a subsidiary of General Electric, operating under the
13666 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
13667 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
13670 # Since <cuf1> is blank, when you want to erase something you
13671 # are out of luck. You will have to do ^L's a lot to
13672 # redraw the screen. h1000 is untested. It doesn't work in
13673 # vi - this terminal is too dumb for even vi. (The code is
13674 # there but it isn't debugged for this case.)
13675 hz1000|hazeltine 1000,
13678 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
13680 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
13681 hz1420|hazeltine 1420,
13684 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
13685 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
13686 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
13688 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
13689 # freakout with out-of-range args and tn3270. No hz since it needs to
13691 hz1500|hazeltine 1500,
13694 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13695 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
13696 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
13697 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
13698 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
13699 # h1510 assumed to be in sane escape mode. Else use h1500.
13700 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
13701 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
13702 # removed incorrect and overridden ":do=^J:" -- esr)
13703 hz1510|hazeltine 1510,
13706 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
13707 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
13708 el=\E^O, il1=\E^Z, ind=^J,
13710 # The following switch settings are assumed for normal operation:
13711 # FULL CR U/L_CASE ESCAPE
13712 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
13713 # Other switches may be set for operator convenience or communication
13715 hz1520|Hazeltine 1520,
13716 OTbs, am, bw, msgr,
13718 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
13719 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13720 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
13721 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
13722 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
13723 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
13724 # This version works with the escape switch off
13725 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
13726 hz1520-noesc|hazeltine 1520,
13729 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13730 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
13731 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
13732 # Note: the h1552 appears to be the first Hazeltine terminal which
13733 # is not braindamaged. It has tildes and backprimes and everything!
13734 # Be sure the auto lf/cr switch is set to cr.
13735 hz1552|hazeltine 1552,
13737 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
13738 lf2=red, lf3=green, use=vt52,
13739 hz1552-rv|hazeltine 1552 reverse video,
13740 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
13741 # Note: h2000 won't work well because of a clash between upper case and ~'s.
13742 hz2000|hazeltine 2000,
13745 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
13746 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
13747 il1=~\032$<6>, ind=^J, pad=\177,
13748 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
13749 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
13750 # to work ok. There is one problem though if one types a lot of garbage
13751 # characters very fast vi seems not able to keep up and hangs while trying
13752 # to insert. That's in insert mode while trying to insert in the middle of
13753 # a line. It might be because the Esprit doesn't have insert char and delete
13754 # char as a built in function. Vi has to delete to end of line and then
13755 # redraw the rest of the line.
13756 esprit|Hazeltine Esprit I,
13759 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
13760 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13761 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
13762 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
13763 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
13764 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
13765 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
13766 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
13767 esprit-am|hazeltine esprit auto-margin,
13769 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
13770 # Vi it seems always wants to send a control J for "do" and it turned out
13771 # that the terminal would work somewhat if the auto LF/CR was turned off.
13772 # (hmod1: removed :dn=~^K: -- esr)
13773 hmod1|Hazeltine Modular 1,
13776 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13777 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
13778 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
13779 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
13781 # Hazeltine Executive 80 Model 30 (1554?)
13782 # from Will Martin <control@ALMSA-1.ARPA> via BRL
13783 # Like VT100, except for different "am" behavior.
13784 hazel|exec80|h80|he80|Hazeltine Executive 80,
13786 cols#80, it#8, lines#24, vt#3,
13787 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
13788 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13789 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
13790 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
13791 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
13792 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
13793 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13794 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
13795 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
13796 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
13797 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13798 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
13804 ibm327x|line mode IBM 3270 style,
13806 clear=^M^J, el=^M, home=^M,
13808 ibm3101|i3101|IBM 3101-10,
13811 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13813 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
13814 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
13815 ibm3151|IBM 3151 display,
13816 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
13817 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
13818 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
13819 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
13820 # removed kend, knp, kpp -TD
13821 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
13822 OTbs, am, mir, msgr,
13823 cols#80, it#8, lines#24,
13824 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
13825 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
13826 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13827 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
13828 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
13829 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
13830 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
13831 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
13832 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
13833 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
13834 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
13835 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
13836 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
13837 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
13838 rmso=\E4@, rmul=\E4@,
13839 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
13840 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
13842 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
13843 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
13844 ibm3162|IBM 3162 display,
13845 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
13846 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
13849 # This really should not use setab/setaf, but it is clear that the
13850 # original terminfo does not toggle red/blue colors as in setb/setf.
13851 ibm3164|i3164|IBM 3164,
13853 colors#8, pairs#64,
13854 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
13855 setab=\E4 %p1%{64}%+%c,
13856 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
13857 smcup=\E!9/N\E>B, use=ibm3161,
13859 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
13861 cols#80, it#8, lines#25,
13862 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13863 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13864 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13865 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13866 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13867 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
13868 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
13869 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
13870 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13871 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
13872 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
13873 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
13874 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
13875 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
13876 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
13877 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
13878 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
13879 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
13880 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13881 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
13882 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
13883 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
13884 rmso=\E[m, rmul=\E[m, rs2=\Ec,
13885 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
13886 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13888 ibmaed|IBM Experimental display,
13889 OTbs, am, eo, msgr,
13890 cols#80, it#8, lines#52,
13891 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
13892 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
13893 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
13894 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13895 rmso=\E0, sgr0=\E0, smso=\E0,
13896 ibm-apl|apl|IBM apl terminal simulator,
13897 lines#25, use=dm1520,
13898 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
13899 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
13900 ibmmono|IBM workstation monochrome,
13902 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
13903 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
13904 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
13905 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
13906 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
13907 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
13909 ibmega|IBM Enhanced Color Display,
13910 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13911 nel=^M^J, use=ibmmono,
13912 # This color scheme is assumed in some recent IBM terminal descriptions
13913 # (green on black, emulated on a 16-color terminal).
13914 ibm+color|IBM color definitions,
13915 colors#8, ncv#3, pairs#64,
13917 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
13918 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
13919 ibm+16color|IBM aixterm color definitions,
13920 colors#16, pairs#256,
13921 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
13922 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
13923 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13924 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13925 ibm5154|IBM 5154 Color display,
13926 colors#8, ncv@, pairs#64,
13927 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13929 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
13930 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
13932 ibmvga-c|IBM VGA display color termcap,
13933 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13934 nel=^M^J, use=ibmega-c,
13935 ibmvga|IBM VGA display,
13936 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13937 nel=^M^J, use=ibmega,
13938 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
13939 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
13941 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
13942 ibm6155|IBM 6155 Black & White display,
13943 blink@, bold@, use=ibm5151,
13944 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
13945 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
13947 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
13948 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
13950 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
13952 ibm6154|IBM 6154 Color displays,
13953 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13954 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13955 sgr0=\E[0;10m, use=ibm5154,
13956 ibm6153|IBM 6153 Black & White display,
13957 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13958 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13959 sgr0=\E[0;10m, use=ibm5151,
13960 ibm6153-90|IBM 6153 Black & White display,
13962 blink@, bold@, use=ibm5151,
13963 ibm6153-40|IBM 6153 Black & White display,
13964 cols#40, lines#12, use=ibm6153-90,
13965 ibm8512|ibm8513|IBM color VGA Terminal,
13967 cols#80, it#8, lines#25,
13968 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
13969 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
13970 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
13971 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
13972 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
13973 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
13974 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13975 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
13976 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
13977 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
13978 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
13979 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
13980 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13982 hft-c|HFT with Color,
13983 colors#8, pairs#64,
13984 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
13985 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
13986 use=ibm5151, use=ibm+color,
13987 hft-c-old|HFT with Color PC850,
13988 colors#8, pairs#64,
13989 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13991 hft-old|AIWS High Function Terminal,
13994 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13995 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13996 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
13997 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
13998 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13999 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
14000 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14001 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
14002 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
14003 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14004 ibm-system1|system1|ibm system/1 computer,
14007 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
14008 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
14010 # lft-pc850 : IBM Low Function Terminal Device
14011 # lft "supports" underline, bold, and blink in the sense that the lft code
14012 # sets all the right bits. HOWEVER, depending upon the adapter, these
14013 # attributes may or may not be supported by the device driver.
14014 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
14016 cols#80, it#8, lines#25,
14017 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14018 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14019 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14020 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14021 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14022 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
14023 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
14024 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
14025 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
14026 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
14027 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
14028 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
14029 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
14030 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
14031 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
14032 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
14033 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
14034 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
14035 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14036 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
14037 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
14038 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
14039 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
14040 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14041 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14043 ibm5081|hft|IBM Megapel Color display,
14044 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
14045 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14046 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
14049 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
14051 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
14053 ibm8514|IBM 8514/a color VGA display,
14055 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14056 ibm8514-c|IBM 8514 color display with standout and underline,
14059 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
14060 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
14064 # AIX entries. IBM ships these with AIX 3.2.5.
14065 # -- added rc, sc based on manpage -TD
14066 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14067 aixterm|IBM Aixterm Terminal Emulator,
14069 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14070 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14071 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14072 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14073 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
14075 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14076 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
14077 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14078 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14079 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
14081 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
14082 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14083 tsl=\E[?%p1%dT, use=ibm6153,
14084 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
14085 acsc@, use=aixterm,
14086 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
14087 acsc@, use=aixterm-m,
14089 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
14090 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
14091 use=ibm+16color, use=aixterm,
14093 #### Infoton/General Terminal Corp.
14096 # gt100 sounds like something DEC would come out with. Let's hope they don't.
14097 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
14100 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14101 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
14102 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
14103 ind=^J, rmso=\Ea, smso=\Eb,
14107 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14108 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
14109 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
14110 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
14111 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
14115 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
14116 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
14117 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
14121 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
14122 ed=^K, ind=^J, ll=^H^\,
14124 # The ICL6402 was actually the Kokusai Display System 6402.
14125 # The 6404 was the KDS7372 (color version of the 6402).
14127 # ICL6404 control codes follow:
14130 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14131 #ctrl-A set SOM position at cursor position
14137 #ctrl-L Cursor right
14138 #ctrl-M Carriage return
14139 #ctrl-N Disable xon/xoff to host
14140 #ctrl-O Enable xon/xoff to host
14141 #ctrl-R Enable bidirectional mode
14142 #ctrl-T Disable bidirectional mode
14143 #ctrl-V Cursor down
14144 #ctrl-Z Clear unprotected data to insert char
14145 #ctrl-^ Cursor home
14148 #ESC lead-in char for multiple character command
14150 #ESC space R execute power on sequence
14151 #ESC ! p1 p2 define scroll region:
14152 # p1 = scroll top line: 20h - 37h
14153 # p1 = scroll bottom line: 20h - 37h
14154 #ESC " unlock keyboard
14155 #ESC # lock keyboard
14156 #ESC $ Semi-graphics mode on
14157 #ESC % Semi-graphics mode off
14158 #ESC & protect mode on
14159 #ESC ' protect mode off
14160 #ESC ( write protect mode off (full intensity)
14161 #ESC ) write protect mode on (half intensity)
14163 #ESC * clear screen
14164 #ESC + clear unprotected data to insert char
14165 #ESC , clear unprotected data to half intensity spaces
14166 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14167 # p1 = page number 0 - 3
14168 # p2 = row 20h - 7fh
14169 # p3 = column (lo) 20h - 7fh
14170 # p4 = column (hi) 20h - 21h (only 132 col)
14171 #ESC . p1 set cursor style:
14172 # p1 = 0 invisible cursor
14173 # p1 = 1 block blinking cursor
14174 # p1 = 2 block steady cursor
14175 # p1 = 3 underline blinking cursor
14176 # p1 = 4 underline steady cursor
14177 #ESC / transmit cursor location (page, row, column)
14178 #ESC 0 p1 p2 p3 p4 program edit key:
14179 # p1 = edit key code: '@'-'S', '`'-'s'
14180 # p2 p3 p4 = program data (3 bytes)
14183 #ESC 2 clear tab at cursor
14184 #ESC 3 clear all tabs
14185 #ESC 4 send unprotect line to cursor
14186 #ESC 5 send unprotect page to cursor
14187 #ESC 6 send line to cursor
14188 #ESC 7 send page to cursor
14189 #ESC 8 n set scroll mode:
14190 # n = 0 set jump scroll
14191 # n = 1 set smooth scroll
14192 #ESC 9 n control display:
14193 # n = 0 display off
14195 #ESC : clear unprotected data to null
14196 #ESC ; clear unprotected data to insert char
14199 #ESC = p1 p2 address cursor to row, column
14200 # p1 = row 20h - 7fh
14201 # p2 = column (lo) 20h - 7fh
14202 # p3 = column (hi) 20h - 21h (only 132 col)
14203 #ESC > keyclick off
14204 #ESC ? transmit cursor location (row, column)
14206 #ESC @ copy print mode on
14207 #ESC A copy print mode off
14208 #ESC B block mode on
14209 #ESC C block mode off (conversation mode)
14210 #ESC D F set full duplex
14211 #ESC D H set half duplex
14213 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14214 # 0 = black, 1 = red, 2 = green, 3 = yellow
14215 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14216 #ESC G n set serial field attribute (n = 30h - 3Fh)
14217 #ESC H n full graphics mode:
14218 # n = 0 exit full graphics mode
14219 # n = 1 enter full graphics mode
14222 #ESC K forward page
14224 #ESC L unformatted page print
14225 #ESC M L move window left (132 col mode only)
14226 #ESC M R move window right (132 col mode only)
14227 #ESC N set page edit (clear line edit)
14228 #ESC O set line edit (clear page edit)
14229 #ESC P formatted page print
14230 #ESC Q character insert
14232 #ESC S send message unprotected only
14233 #ESC T erase line to insert char
14234 #ESC U set monitor mode (see ESC X, ESC u)
14236 #ESC V n select video attribute mode:
14237 # n = 0 serial field attribute mode
14238 # n = 1 parallel character attribute mode
14239 #ESC V 2 n define line attribute:
14240 # n = 0 single width single height
14241 # n = 1 single width double height
14242 # n = 2 double width single height
14243 # n = 3 double width double height
14244 #ESC V 3 n select character font:
14245 # n = 0 system font
14246 # n = 1 user defined font
14247 #ESC V 4 n select screen mode:
14248 # n = 0 page screen mode
14249 # n = 1 virtual screen mode
14250 #ESC V 5 n control mouse mode:
14251 # n = 0 disable mouse
14252 # n = 1 enable sample mode
14253 # n = 2 send mouse information
14254 # n = 3 enable request mode
14255 #ESC W character delete
14256 #ESC X clear monitor mode (see ESC U, ESC u)
14257 #ESC Y erase page to insert char
14259 #ESC Z n send user/status line:
14260 # n = 0 send user line
14261 # n = 1 send status line
14262 # n = 2 send terminal ID
14263 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14267 # 3 = blink blank (= blank)
14269 # 5 = reverse blank
14270 # 6 = reverse blink
14271 # 7 = reverse blink blank (= reverse blank)
14273 # 9 = underline blank
14274 # : = underline blink
14275 # ; = underline blink blank
14276 # < = reverse underline
14277 # = = reverse underline blank
14278 # > = reverse underline blink
14279 # ? = reverse underline blink blank
14280 # p2, p3: f/grnd, b/grnd colour
14281 # (see ESC F for colours)
14282 # use ZZ for mono, eg.
14283 # ESC [ 0 Z Z for normal
14284 # ESC [ 4 Z Z for inverse etc.
14286 #ESC \ n set page size:
14287 # n = 1 24 lines/page
14288 # n = 2 48 lines/page
14289 # n = 3 72 lines/page
14290 # n = 4 96 lines/page
14291 #ESC ] n set Wordstar mode:
14292 # n = 0 normal (KDS7372) mode
14293 # n = 1 Wordstar mode
14295 #ESC b set foreground colour screen
14297 #ESC c n enter self-test mode:
14298 # n = 0 exit self test mode
14302 # n = 4 screen display test
14303 # n = 5 main/printer port test
14304 # n = 6 mouse port test
14305 # n = 7 graphics board test
14306 # n = 8 graphics memory test
14307 # n = 9 display all 'E'
14308 # n = : display all 'H'
14309 #ESC d set background colour screen
14311 #ESC e n program insert char (n = insert char)
14312 #ESC f text CR load user status line with 'text'
14314 #ESC g display user status line on 25th line
14315 #ESC h display system status line on 25th line
14317 #ESC j reverse linefeed
14318 #ESC k n duplex/local edit mode:
14319 # n = 0 duplex edit mode
14320 # n = 1 local edit mode
14321 #ESC l n select virtual screen:
14324 #ESC m save current config to NVRAM
14325 #ESC n p1 select display screen:
14330 #ESC o p1 p2 set characters/line and attribute:
14331 # p1 = 0 80 chars/line
14333 #ESC o p1 p2 set characters/line and attribute:
14334 # p1 = 0 80 chars/line
14335 # p1 = 1 132 chars/line
14336 # p2 = 0 single width single height
14337 # p2 = 1 single width double height
14338 # p2 = 2 double width single height
14339 # p2 = 3 double width double height
14341 #ESC q insert mode on
14342 #ESC r edit mode on
14343 #ESC s send message all
14344 #ESC t erase line to null
14345 #ESC u clear monitor mode (see ESC U, ESC X)
14346 #ESC v autopage mode on
14347 #ESC w autopage mode off
14348 #ESC x p1 p2 p3 define delimiter code...
14349 #ESC y erase page to null
14351 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14352 # p1 = starting row
14353 # p2 = starting column
14357 #ESC { p1 p2 p3 p4 configure main port
14358 # (baud, stop bits, parity, word length)
14360 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14361 # p1 = function key code:
14362 # '1' - ';' normal f1- f11
14363 # '<' - 'F' shifted f1 - f11
14364 # p2 = program mode:
14368 # Ctrl-Y = terminator
14369 # (use Ctrl-P to escape ^P, ^Y )
14371 #ESC } p1 p2 p3 p4 configure printer port
14372 # (baud, stop bits, parity, word length)
14373 #ESC ~ send system status
14375 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14377 # Entry is by esr going solely on above information and is UNTESTED.
14378 # This actually looks a lot like a Televideo 9xx.
14379 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14380 # to make color work without a test terminal. The <am> capability is a guess.
14381 # The initialization string sets conversation mode, blinking underline cursor,
14382 # full duplex, parallel attribute mode, display user status line, white
14383 # foreground, black background, normal highlight.
14385 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14388 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14390 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14391 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14392 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14393 hts=\E1, il1=\EE, invis=\E[1ZZ,
14394 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14395 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14396 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14397 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
14398 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14399 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14400 rs2=\Eo1, use=icl6404,
14402 #### Interactive Systems Corp
14404 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14405 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14406 # bought out by Sun.
14409 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14410 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14411 # ":le=^_:" later overridden -- esr)
14412 intext|Interactive Systems Corporation modified owl 1200,
14414 cols#80, it#8, lines#24, xmc#1,
14415 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14416 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14417 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14418 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14419 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14420 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14421 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14422 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14424 intext2|intextii|INTERACTIVE modified owl 1251,
14426 cols#80, lines#24, xmc#0,
14427 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
14428 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
14429 dl1=\E[M, ed=\E[J, el=\E[K,
14430 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14431 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14432 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14433 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14434 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14435 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14436 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14437 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14440 #### Kimtron (abm, kt)
14442 # Kimtron seems to be history, but as March 1998 these people are still
14443 # offering repair services for Kimtron equipment:
14445 # Com/Pair Monitor Service
14446 # 1105 N. Cliff Ave.
14447 # Sioux Falls, South Dakota 57103
14449 # WATS voice: 1-800/398-4946
14450 # POTS fax: +1 605/338-8709
14451 # POTS voice: +1 605/338-9650
14452 # Email: <compair@sd.cybernex.net>
14453 # Internet/Web: <http://www.com-pair.com>
14455 # Kimtron entries include (undocumented) codes for: enter dim mode,
14456 # enter bold mode, enter reverse mode, turn off all attributes.
14459 # Kimtron ABM 85 added by Dual Systems
14460 # (abm85: removed duplicated ":kd=^J:" -- esr)
14461 abm85|Kimtron ABM 85,
14462 OTbs, am, bw, msgr,
14463 cols#80, it#8, lines#24, xmc#1,
14464 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14465 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14466 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14467 if=/usr/share/tabset/stdcrt, il1=\EE,
14468 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14469 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14470 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14471 # Kimtron ABM 85H added by Dual Systems.
14472 # Some notes about the abm85h entries:
14473 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14474 # firmware revs prior to SP51
14475 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14476 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14477 # in some places and NOT software settable i.e., <is2> can't fix it)
14478 # 3) In 85h mode, the arrow keys and special functions transmit when
14479 # the terminal is in dup-edit, and work only locally in local-edit.
14480 # Vi won't swallow `del char' for instance, but <smcup> turns on
14481 # dup-edit anyway so that the arrow keys will work right. If the
14482 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14483 # <is2>. Note that 920E mode does not have software commands to toggle
14484 # between dup and local edit, so you get whatever was set last on the
14486 # 4) <flash> attribute is nice, but seems too slow to work correctly
14488 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14489 # are selected, the <xmc@> entry should be removed.
14490 # 6) auto new-line should be on (selectable from setup mode only)
14492 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14493 abm85h|Kimtron ABM 85H native mode,
14496 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14498 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14499 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14501 abm85e|Kimtron ABM 85H in 920E mode,
14503 bel=^G, dim=\E), flash@,
14504 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14505 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14506 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14509 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14510 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14511 # From: <malman@bbn-vax.arpa>
14512 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14513 kt7|kimtron model kt-7,
14515 cols#80, it#8, lines#24,
14516 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14517 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14518 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14519 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14520 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14521 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14522 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14523 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14524 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14525 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
14526 # other kt7 entry and the adjacent key capabilities). Removed EE which is
14527 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
14528 # but we can't figure out what.
14529 kt7ix|kimtron model kt-7 or 70 in IX mode,
14531 cols#80, it#8, lines#25,
14532 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
14533 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
14534 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14535 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
14536 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
14537 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
14538 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
14539 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14540 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14541 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
14542 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
14543 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
14545 #### Microdata/MDIS
14547 # This was a line of terminals made by McDonnell-Douglas Information Systems.
14548 # These entries come direct from MDIS documentation. I have edited them only
14549 # to move primary names of the form p[0-9] * to aliases, and to comment out
14550 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
14551 # also removed the change history; the last version indicates this is
14552 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
14555 # McDonnell Information Systems Terminal Family History
14556 # =========================================
14558 # Prism-1, Prism-2 and P99:
14559 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
14561 # Prism-4 and Prism-5:
14562 # Slightly less ancient range of Microdata terminals. Follow-on from
14563 # Prism-2, but with many enhancements. P5 has eight display pages.
14566 # A special terminal for use with library systems, primarily in Germany.
14567 # Limited numbers. Similar functionality to P5 (except attributes?).
14569 # Prism-7, Prism-8 and Prism-9:
14570 # More recent range of MDIS terminals, in which P7 and P8
14571 # replace the P4 & P5, with added functionality, and P9 is the flagship.
14572 # The P9 has two emulation modes - P8 and ANSI - and includes a
14573 # large number of the DEC VT220 control sequences. Both
14574 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
14576 # Prism-12 and Prism-14:
14577 # Latest range, functionally very similar to the P9. The P14 has a
14578 # black-on-white overscanning screen.
14580 # The terminfo definitions given here are:
14582 # p2 - Prism-2 (or Prism-1 or P99).
14584 # p4 - Prism-4 (and older P7s & P8s).
14585 # p5 - Prism-5 (or Prism-6).
14588 # p8 - Prism-8 (in national or multinational mode).
14589 # p8-w - 132 column version of p8.
14590 # p9 - Prism-9 in ANSI mode.
14591 # p9-w - 132 column version of p9.
14592 # p9-8 - Prism-9 in Prism-8 emulation mode.
14593 # p9-8-w - As p9-8, but with 132 columns.
14595 # p12 - Prism-12 in ANSI mode.
14596 # p12-w - 132 column version of p12.
14597 # p12-m - Prism-12 in MDC emulation mode.
14598 # p12-m-w - As p12-m, but with 132 columns.
14599 # p14 - Prism-14 in ANSI mode.
14600 # p14-w - 132 column version of p14.
14601 # p14-m - Prism-14 in MDC emulation mode.
14602 # p14-m-w - As p14-m, but with 132 columns.
14607 # Includes Prism-1 and basic P99 without SP or MP loaded.
14608 # The simplest form of Prism-type terminal.
14609 # Basic cursor movement and clearing operations only.
14610 # No video attributes.
14612 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14613 # value up, followed by backspace.
14615 prism2|MDC Prism-2,
14618 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14619 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14620 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
14621 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14622 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
14627 # Includes early versions of P7 & P8.
14628 # Basic family definition for most Prisms (except P2 and P9 ANSI).
14630 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14631 # value up, followed by backspace.
14632 # Cursor key definitions removed because they interfere with vi and csh keys.
14634 prism4|p4|P4|MDC Prism-4,
14635 am, bw, hs, mc5i, msgr,
14636 cols#80, lines#24, wsl#72, xmc#1,
14637 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
14638 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14639 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14640 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
14641 fsl=^]\345, home=^A,
14642 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14643 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
14644 rev=^CD, rmso=^C\s, rmul=^C\s,
14645 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
14646 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
14647 vpa=\013%p1%{32}%+%c,
14652 # Same definition as p4. Includes Prism-6 (not tested!).
14653 # Does not use any multi-page features.
14655 prism5|p5|P5|MDC Prism-5,
14661 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
14663 # Use p4 for very early models of P7.
14664 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14666 prism7|p7|P7|MDC Prism-7,
14667 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
14672 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
14673 # Supports national and multinational character sets.
14675 # Alternate char set operations only work in multinational mode.
14676 # Use p4 for very early models of P8.
14677 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14678 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14680 prism8|p8|P8|MDC Prism-8,
14681 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
14682 vpa=\E[%i%p1%dd, use=p4,
14684 # p8-w: Prism-8 in 132 column mode
14685 # --------------------------------
14687 # 'Wide' version of p8.
14689 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14691 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
14693 is2=\E[<12h\E[<14h, use=p8,
14695 # p9: Prism-9 in ANSI mode
14696 # -------------------------
14698 # The "flagship" model of this generation of terminals.
14699 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
14701 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
14702 # Fixes to deal with terminal firmware bugs:
14703 # . 'ri' uses insert-line since rev index doesn't always
14704 # . 'sgr0' has extra '0' since esc[m fails
14705 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
14706 # Not covered in the current definition:
14708 # . Programming Fn keys
14709 # . Graphic characters (defaults correctly to vt100)
14710 # . Padding values (sets xon)
14711 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14713 prism9|p9|P9|MDC Prism-9 in ANSII mode,
14714 am, bw, hs, mc5i, msgr, xenl, xon,
14715 cols#80, it#8, lines#24, vt#3, wsl#72,
14716 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
14717 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
14718 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14719 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14720 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14721 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
14722 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
14723 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
14724 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
14725 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
14726 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
14727 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
14728 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
14729 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
14730 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
14731 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
14732 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14733 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
14735 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
14736 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14737 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
14739 # p9-w: Prism-9 in 132 column mode
14740 # --------------------------------
14742 # 'Wide' version of p9.
14744 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
14746 is2=\E[&p\E[<12l\E F\E[<14h,
14747 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
14749 # p9-8: Prism-9 in P8 mode
14750 # ------------------------
14752 # P9 terminal in P8 emulation mode.
14753 # Similar to p8 definition.
14754 # Insertion and deletion operations possible.
14756 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
14757 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14758 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
14760 # p9-8-w: Prism-9 in P8 and 132 column modes
14761 # ------------------------------------------
14763 # P9 terminal in P8 emulation mode and 132 column mode.
14765 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
14766 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14767 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
14769 # p12: Prism-12 in ANSI mode
14770 # ---------------------------
14772 # See p9 definition.
14774 prism12|p12|P12|MDC Prism-12 in ANSI mode,
14777 # p12-w: Prism-12 in 132 column mode
14778 # ----------------------------------
14780 # 'Wide' version of p12.
14782 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
14785 # p12-m: Prism-12 in MDC emulation mode
14786 # -------------------------------------
14788 # P12 terminal in MDC emulation mode.
14789 # Similar to p8 definition.
14790 # Insertion and deletion operations possible.
14792 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
14795 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
14796 # -------------------------------------------------------
14798 # P12 terminal in MDC emulation mode and 132 column mode.
14800 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
14803 # p14: Prism-14 in ANSII mode
14804 # ---------------------------
14806 # See p9 definition.
14808 prism14|p14|P14|MDC Prism-14 in ANSII mode,
14811 # p14-w: Prism-14 in 132 column mode
14812 # ----------------------------------
14814 # 'Wide' version of p14.
14816 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
14819 # p14-m: Prism-14 in MDC emulation mode
14820 # -------------------------------------
14822 # P14 terminal in MDC emulation mode.
14823 # Similar to p8 definition.
14824 # Insertion and deletion operations possible.
14826 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
14829 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
14830 # -------------------------------------------------------
14832 # P14 terminal in MDC emulation mode and 132 column mode.
14834 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
14837 # End of McDonnell Information Systems Prism definitions
14839 # These things were popular in the Pick database community at one time
14840 # From: George Land <georgeland@aol.com> 24 Sep 1996
14841 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
14843 cols#80, lines#24, ma#1, wsl#78, xmc#1,
14844 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
14845 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
14846 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
14847 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
14848 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
14849 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
14850 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14851 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
14852 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
14853 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
14856 #### Microterm (act, mime)
14858 # The mime1 entries refer to the Microterm Mime I or Mime II.
14859 # The default mime is assumed to be in enhanced act iv mode.
14862 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
14863 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
14864 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
14865 # since Sytek insists ^S means xoff.
14866 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
14867 act4|microterm|microterm act iv,
14870 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
14871 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
14872 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
14873 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
14874 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
14876 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
14877 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
14878 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
14879 act5|microterm5|microterm act v,
14880 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
14882 # Mimes using brightness for standout. Half bright is really dim unless
14883 # you turn up the brightness so far that lines show up on the screen.
14884 mime-fb|full bright mime1,
14885 is2=^S\E, rmso=^S, smso=^Y, use=mime,
14886 mime-hb|half bright mime1,
14887 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
14888 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
14889 # the more plausible ":do=^J:" -- esr)
14890 # uc was at one time disabled to get around a curses bug, be wary of it
14891 mime|mime1|mime2|mimei|mimeii|microterm mime1,
14893 cols#80, it#8, lines#24, vt#9,
14894 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
14895 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
14896 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
14897 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
14898 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
14899 # These termcaps (for mime2a) put the terminal in low intensity mode
14900 # since high intensity mode is so obnoxious.
14901 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
14904 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14905 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
14906 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
14907 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
14908 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
14909 smir=\EE, smso=\E\:, smul=\E6,
14910 # This is the preferred mode (but ^X can't be used as a kill character)
14911 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
14913 cols#80, it#8, lines#24,
14914 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14915 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
14916 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
14917 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
14918 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
14919 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
14920 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
14921 mime3a|mime1 emulating 3a,
14923 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
14924 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
14926 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
14928 # Wed Mar 9 18:53:21 1983
14929 # We run our terminals at 2400 baud, so there might be some timing problems at
14930 # higher speeds. The major improvements in this model are the terminal now
14931 # scrolls down and insert mode works without redrawing the rest of the line
14932 # to the right of the cursor. This is done with a bit of a kludge using the
14933 # exit graphics mode to get out of insert, but it does not appear to hurt
14934 # anything when using vi at least. If you have some users using act4s with
14935 # programs that use curses and graphics mode this could be a problem.
14936 mime314|mm314|mime 314,
14939 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
14940 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
14941 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
14942 # Microterm mime 340 from University of Wisconsin
14943 mm340|mime340|mime 340,
14945 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14946 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14947 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
14948 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
14949 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
14950 # This came from University of Wisconsin marked "astro termcap for jooss".
14951 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
14952 # also added <rmam>/<smam> based on the init string -- esr)
14953 mt4520-rv|micro-term 4520 reverse video,
14954 am, hs, msgr, xenl, xon,
14955 cols#80, it#8, lines#24, wsl#80,
14956 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
14957 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14958 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14959 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14960 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14961 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14962 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14963 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14964 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
14965 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14966 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
14967 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
14968 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
14969 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
14970 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
14971 tbc=\E[g, tsl=\E[25;1H,
14973 # Fri Aug 5 08:11:57 1983
14974 # This entry works for the ergo 4000 with the following setups:
14975 # ansi,wraparound,newline disabled, xon/xoff disabled in both
14978 # WARNING!!! There are multiple versions of ERGO 4000 microcode
14979 # Be advised that very early versions DO NOT WORK RIGHT !!
14980 # Microterm does have a ROM exchange program- use it or lose big
14981 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
14982 ergo4000|microterm ergo 4000,
14985 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
14986 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14987 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
14988 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
14989 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
14990 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14991 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
14992 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
14993 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
14994 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
14999 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
15000 # For what happened to that group, see the ADDS section.
15002 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
15005 # The following vendor-supplied termcaps were captured from the Boundless
15006 # Technologies site, 8 March 1998. I removed all-upper-case names that were
15007 # identical, except for case, to lower-case ones. I also uncommented the acsc
15010 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15011 # DEC vt200/300 with color capabilities added.
15012 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15013 colors#8, pairs#64,
15014 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15016 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15017 # DEC vt200/300 with color capabilities added.
15018 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15019 colors#8, pairs#64,
15020 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15021 use=ncr260vt300wan,
15022 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15023 # DEC vt200/300 with color capabilities added.
15024 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
15025 colors#8, pairs#64,
15026 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15028 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
15029 # DEC vt200/300 with color capabilities added.
15030 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
15031 colors#8, pairs#64,
15032 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15033 use=ncr260vt300wpp,
15034 # This definition for ViewPoint supports several attributes. This means
15035 # that it has magic cookies (extra spaces where the attributes begin).
15036 # Some applications do not function well with magic cookies. The System
15037 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15038 # If supporting various attributes is not vital, 'xmc#1' and the extra
15039 # attributes can be removed.
15040 # Mapping to ASCII character set ('acsc' capability) can also be
15041 # restored if needed.
15042 ncr260vppp|NCR 2900_260 viewpoint,
15043 am, bw, hs, km, mc5i, mir, msgr, xon,
15044 cols#80, lines#24, nlab#32, xmc#1,
15045 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15046 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
15047 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
15048 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
15049 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
15050 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
15051 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
15052 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15053 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
15054 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
15055 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
15056 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
15057 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
15058 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
15059 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
15060 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
15061 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15062 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
15063 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
15064 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
15065 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
15066 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15067 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15068 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
15069 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
15070 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
15072 cup=\Ea%i%p1%dR%p2%dC$<30>,
15073 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15074 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15076 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
15077 am, hs, mir, msgr, xenl, xon,
15078 cols#80, lines#24, nlab#32,
15079 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15080 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15081 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15082 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
15083 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15084 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15085 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15086 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15087 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15088 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
15089 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
15090 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
15091 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
15093 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15094 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15095 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
15096 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
15097 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
15098 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
15099 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15101 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15102 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
15103 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
15104 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15105 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
15107 cup=\E[%i%p1%d;%p2%dH$<30>,
15108 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15109 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15111 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
15112 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15113 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15114 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15115 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
15116 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
15117 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15118 smkx=\E=, use=ncr260vt100an,
15119 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
15121 cup=\E[%i%p1%d;%p2%dH$<30>,
15122 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15123 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15125 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
15126 am, hs, mir, msgr, xenl, xon,
15127 cols#80, lines#24, nlab#32,
15128 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15129 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15130 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15131 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15132 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15133 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15134 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15135 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15136 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15137 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15138 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15139 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15140 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15141 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15142 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15143 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15144 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15145 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15146 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
15147 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
15148 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
15149 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15150 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15151 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15152 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15153 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15154 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15155 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15156 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15158 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15159 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15160 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15161 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15163 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15165 cup=\E[%i%p1%d;%p2%dH$<30>,
15166 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15167 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15169 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15170 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15171 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15172 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15173 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15175 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15177 cup=\E[%i%p1%d;%p2%dH$<30>,
15178 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15179 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15181 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15182 am, hs, mir, msgr, xenl, xon,
15183 cols#80, lines#24, nlab#32,
15184 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15185 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15186 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15187 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15188 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15189 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15190 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15191 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15192 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15193 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15194 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15195 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15196 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15197 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15198 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15199 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15200 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15201 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15202 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15203 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15204 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15205 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15206 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15207 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15208 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15209 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15210 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15212 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15214 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15215 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15216 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15217 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15219 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15221 cup=\E[%i%p1%d;%p2%dH$<30>,
15222 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15223 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15225 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15226 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15227 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15228 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15229 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15231 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15233 cup=\E[%i%p1%d;%p2%dH$<30>,
15234 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15235 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15237 # This terminfo file contains color capabilities for the Wyse325 emulation of
15238 # the NCR 2900/260C color terminal. Because of the structure of the command
15239 # (escape sequence) used to set color attributes, one of the fore/background
15240 # colors must be preset to a given value. I have set the background color to
15241 # black. The user can change this setup by altering the last section of the
15242 # 'setf' definition. The escape sequence to set color attributes is
15243 # ESC d y <foreground_color> <background_color> 1
15244 # In addition, the background color can be changed through the desk accessories.
15245 # The capablitiy 'op' sets colors to green on black (default combination).
15247 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15248 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15249 # capability and recompile if you wish to have it included.
15251 ncr260wy325pp|NCR 2900_260 wyse 325,
15252 am, bw, hs, km, mc5i, mir, msgr, xon,
15253 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15254 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15255 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15256 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15257 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15258 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15259 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15260 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15261 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15262 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15263 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15264 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15265 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15266 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15267 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15268 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15269 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15270 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15271 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15272 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15273 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15274 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15275 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15276 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15278 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15279 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15280 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15282 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15284 cup=\Ea%i%p1%dR%p2%dC$<30>,
15285 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15286 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15288 # This definition for Wyse 350 supports several attributes. This means
15289 # that it has magic cookies (extra spaces where the attributes begin).
15290 # Some applications do not function well with magic cookies. The System
15291 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15292 # If supporting various attributes is not vital, 'xmc#1' and the extra
15293 # attributes can be removed.
15294 # Mapping to ASCII character set ('acsc' capability) can also be
15295 # restored if needed.
15296 # In addition, color capabilities have been added to this file. The drawback,
15297 # however, is that the background color has to be black. The foreground colors
15298 # are numbered 0 through 15.
15300 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15301 # with the 'pairs' capability defined as below. If you wish to
15302 # have it included, Un-comment it and recompile (using 'tic').
15304 ncr260wy350pp|NCR 2900_260 wyse 350,
15305 am, bw, hs, km, mc5i, mir, msgr, xon,
15306 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15307 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15308 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15309 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15310 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15311 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15312 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15313 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15314 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15315 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15316 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15317 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15318 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15319 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15320 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15321 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15322 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15323 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15324 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15325 mc0=\EP$<10>, mc4=^T, mc5=^R,
15326 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15327 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15328 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15329 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15331 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15332 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15333 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15335 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15337 cup=\Ea%i%p1%dR%p2%dC$<30>,
15338 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15339 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15341 # This definition for Wyse 50+ supports several attributes. This means
15342 # that it has magic cookies (extra spaces where the attributes begin).
15343 # Some applications do not function well with magic cookies. The System
15344 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15345 # If supporting various attributes is not vital, 'xmc#1' and the extra
15346 # attributes can be removed.
15347 # Mapping to ASCII character set ('acsc' capability) can also be
15348 # restored if needed.
15349 # (ncr260wy50+pp: originally contained commented-out
15350 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15351 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15352 am, bw, hs, km, mc5i, mir, msgr, xon,
15353 cols#80, lines#24, nlab#32, xmc#1,
15354 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15355 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15356 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15357 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15358 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15359 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15360 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15362 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15363 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15364 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15365 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15366 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15367 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15368 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15369 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15370 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15371 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15372 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15373 mc0=\EP$<10>, mc4=^T, mc5=^R,
15374 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15375 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15376 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15377 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15378 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15379 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15380 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15382 cup=\Ea%i%p1%dR%p2%dC$<30>,
15383 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15384 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15386 ncr260wy60pp|NCR 2900_260 wyse 60,
15387 am, bw, hs, km, mc5i, mir, msgr, xon,
15388 cols#80, lines#24, nlab#32,
15389 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15390 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15391 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15392 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15393 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15394 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15395 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15397 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15398 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15399 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15400 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15401 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15402 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15403 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15404 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15405 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15406 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15407 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15408 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15409 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15410 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15411 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15412 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15413 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15414 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15416 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15418 cup=\Ea%i%p1%dR%p2%dC$<30>,
15419 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15420 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15422 ncr160vppp|NCR 2900_160 viewpoint,
15424 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15426 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15428 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15430 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15431 use=ncr260vt100wan,
15432 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15433 use=ncr260vt100wpp,
15434 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15436 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15438 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15439 use=ncr260vt200wan,
15440 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15441 use=ncr260vt200wpp,
15442 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15444 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15446 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15447 use=ncr260vt300wan,
15448 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15449 use=ncr260vt300wpp,
15450 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15452 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15453 use=ncr260wy50+wpp,
15454 ncr160wy60pp|NCR 2900_160 wyse 60,
15456 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15458 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15459 am, hs, mc5i, mir, msgr, xon,
15460 cols#80, it#8, lines#24, nlab#32,
15461 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15462 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15463 clear=\E[2J\E[1;1H$<300>, cr=^M,
15464 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15465 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15466 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15467 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15468 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15469 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15470 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15471 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15472 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15474 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15475 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15476 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15477 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15478 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15479 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15480 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15482 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15483 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15484 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15486 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15488 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15489 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15492 # Vendor-supplied NCR termcaps end here
15494 # NCR7900 DIP switches:
15498 # 5 - Parity (Odd/Even)
15499 # 6 - Don't Send or Do Send Spaces
15500 # 7 - Parity Enable
15501 # 8 - Stop Bits (One/Two)
15504 # 1 - Upper/Lower Shift
15505 # 2 - Typewriter Shift
15506 # 3 - Half Duplex / Full Duplex
15507 # 4 - Light/Dark Background
15508 # 5-6 - Carriage Return Without / With Line Feed
15509 # 7 - Extended Mode
15510 # 8 - Suppress Keyboard Display
15513 # 1 - End of line entry disabled/enabled
15514 # 2 - Conversational mode / (Local?) Mode
15515 # 3 - Control characters displayed / not displayed
15516 # 4 - (2-wire?) / 4-wire communications
15517 # 5 - RTS on and off for each character
15518 # 6 - (50Hz?) / 60 Hz
15519 # 7 - Exit after level zero diagnostics
15520 # 8 - RS-232 interface
15523 # 1 - Reverse Channel (yes / no)
15524 # 2 - Manual answer (no / yes)
15525 # 3-4 - Cursor appearance
15526 # 5 - Communication Rate
15527 # 6 - Enable / Disable EXT turnoff
15528 # 7 - Enable / Disable CR turnoff
15529 # 8 - Enable / Disable backspace
15531 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
15532 # reverse, blink, dim, and underline) the appropriate number of bits (by
15533 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
15534 # '@' is (effectively) "or"ed with each attribute to generate the proper third
15535 # character in the <ESC>0 sequence. The <sgr> string implements the following
15538 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
15539 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
15541 # Where: P1 <==> Standout attribute parameter
15542 # P2 <==> Underline attribute parameter
15543 # P3 <==> Reverse attribute parameter
15544 # P4 <==> Blink attribute parameter
15545 # P5 <==> Dim attribute parameter
15546 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
15547 ncr7900i|ncr7900|ncr 7900 model 1,
15549 cols#80, lines#24, xmc#1,
15550 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15551 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
15552 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
15553 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
15555 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
15556 sgr0=\E0@, smso=\E0Q, smul=\E0`,
15557 ncr7900iv|ncr 7900 model 4,
15560 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
15561 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
15562 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
15563 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
15564 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15565 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
15566 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
15567 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
15568 # The user can enter a CTRL-B to get out of this locked state.
15569 # In <hpa>, we want to output the character given by the formula:
15570 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
15571 ncr7901|ncr 7901 model,
15574 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
15575 cub1=^H, cud1=^J, cuf1=^F,
15576 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
15578 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
15579 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
15580 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
15581 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
15582 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
15583 vpa=\013%p1%{64}%+%c,
15585 # Newbury Data Recording Limited (Newbury Data)
15587 # Have been manufacturing and reselling various peripherals for a long time
15588 # They don't make terminals anymore, but are still in business (in 2007).
15589 # Their e-mail address is at ndsales@newburydata.co.uk
15590 # and their post address is:
15592 # Newbury Data Recording Ltd,
15593 # Premier Park, Road One,
15594 # Winsford, Cheshire, CW7 3PT
15596 # Their technical support is still good, they sent me for free a printed copy
15597 # of the 9500 user manual and I got it just 1 week after I first contacted them
15601 # Manufactured in the early/mid eighties, behaves almost the same as a
15602 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
15603 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
15604 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
15605 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
15606 # recognized: if you type in "ESC !", the next (third) character is not
15607 # echoed, showing that the terminal was actually waiting for a parameter!
15608 ndr9500|nd9500|Newbury Data 9500,
15609 am, bw, hs, mc5i, mir, msgr, ul, xon,
15610 cols#80, lines#24, wsl#79,
15611 acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
15612 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
15613 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15614 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
15615 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
15616 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
15617 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
15618 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
15619 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15620 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
15621 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
15622 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15623 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15624 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
15625 pfloc=\E|%{48}%p1%+%c2%p2\031,
15626 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
15627 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
15628 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
15629 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
15630 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
15632 ndr9500-nl|NDR 9500 with no status line,
15635 dsl@, fsl@, tsl@, use=ndr9500,
15637 ndr9500-25|NDR 9500 with 25th line enabled,
15638 lines#25, use=ndr9500,
15640 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
15641 lines#25, use=ndr9500-nl,
15643 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
15646 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
15647 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
15648 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
15650 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
15651 lines#25, use=ndr9500-mc,
15653 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
15656 dsl@, fsl@, tsl@, use=ndr9500-mc,
15658 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
15659 lines#25, use=ndr9500-mc-nl,
15661 #### Perkin-Elmer (Owl)
15663 # These are official terminfo entries from within Perkin-Elmer.
15666 bantam|pe550|pe6100|perkin elmer 550,
15669 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15670 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15671 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
15672 fox|pe1100|perkin elmer 1100,
15675 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15676 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15677 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
15678 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
15679 owl|pe1200|perkin elmer 1200,
15682 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15683 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15684 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15685 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15686 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
15687 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15688 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15689 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
15690 pe1251|pe6300|pe6312|perkin elmer 1251,
15692 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
15693 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
15694 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15695 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
15696 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
15697 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
15698 # (pe7000m: this had
15699 # rmul=\E!\0, smul=\E!\040,
15700 # which is probably wrong, it collides with kf0
15701 pe7000m|perkin elmer 7000 series monochrome monitor,
15704 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
15705 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15706 ed=\EJ, el=\EI, home=\EH, ind=^J,
15707 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
15708 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
15709 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
15710 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
15712 pe7000c|perkin elmer 7000 series colour monitor,
15713 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
15714 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
15718 # Sperry Univac has merged with Burroughs to form Unisys.
15721 # This entry is for the Sperry UTS30 terminal running the TTY
15722 # utility under control of CP/M Plus 1R1. The functionality
15723 # provided is comparable to the DEC vt100.
15724 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
15725 uts30|sperry uts30 with cp/m@1R1,
15727 cols#80, lines#24, wsl#40,
15728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15729 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
15730 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
15731 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
15732 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
15733 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
15734 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
15735 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
15736 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
15737 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
15738 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
15739 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
15740 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15741 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
15742 smul=\E[4m, tsl=\E], uc=\EPB,
15746 # Tandem builds these things for use with its line of fault-tolerant
15747 # transaction-processing computers. They aren't generally available
15748 # on the merchant market, and so are fairly uncommon.
15751 tandem6510|adm3a repackaged by Tandem,
15754 # A funny series of terminal that TANDEM uses. The actual model numbers
15755 # have a fourth digit after 653 that designates minor variants. These are
15756 # natively block-mode and rather ugly, but they have a character mode which
15757 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
15758 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
15759 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
15760 tandem653|t653x|Tandem 653x multipage terminal,
15761 OTbs, am, da, db, hs,
15762 cols#80, lines#24, wsl#64, xmc#1,
15763 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
15764 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
15765 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
15766 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
15768 #### Tandy/Radio Shack
15770 # Tandy has a line of VDTs distinct from its microcomputers.
15773 dmterm|deskmate terminal,
15776 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
15777 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15778 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
15779 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
15780 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
15781 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
15782 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
15783 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
15785 dt100|dt-100|Tandy DT-100 terminal,
15787 cols#80, lines#24, xmc#1,
15788 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15789 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15790 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
15791 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
15792 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
15793 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
15794 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
15795 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
15796 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
15797 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
15798 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
15799 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
15800 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
15801 cols#132, use=dt100,
15802 dt110|Tandy DT-110 emulating ansi,
15805 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15806 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15807 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
15808 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
15809 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
15810 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
15811 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
15812 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
15813 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
15814 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
15815 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
15816 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15817 smacs=^N, smso=\E[7m, smul=\E[4m,
15818 pt210|TRS-80 PT-210 printing terminal,
15821 bel=^G, cr=^M, cud1=^J, ind=^J,
15823 #### Tektronix (tek)
15825 # Tektronix tubes are graphics terminals. Most of them use modified
15826 # oscilloscope technology incorporating a long-persistence green phosphor,
15827 # and support vector graphics on a main screen with an attached "dialogue
15828 # area" for interactive text.
15831 tek|tek4012|tektronix 4012,
15834 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
15835 ff=\014$<1000>, is2=\E^O,
15836 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15837 tek4013|tektronix 4013,
15838 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
15839 tek4014|tektronix 4014,
15841 is2=\E\017\E9, use=tek4012,
15842 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15843 tek4015|tektronix 4015,
15844 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
15845 tek4014-sm|tektronix 4014 in small font,
15846 cols#121, lines#58,
15847 is2=\E\017\E\:, use=tek4014,
15848 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15849 tek4015-sm|tektronix 4015 in small font,
15850 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
15851 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
15853 # You need to have "stty nl2" in effect. Some versions of tset(1) know
15854 # how to set it for you.
15856 # It's got the Magic Cookie problem around stand-out mode. If you can't
15857 # live with Magic Cookie, remove the :so: and :se: fields and do without
15858 # reverse video. If you like reverse video stand-out mode but don't want
15859 # it to flash, change the letter 'H' to 'P' in the :so: field.
15860 tek4023|tektronix 4023,
15862 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
15863 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
15864 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
15865 rmso=^_@, smso=^_P,
15866 # It is recommended that you run the 4025 at 4800 baud or less;
15867 # various bugs in the terminal appear at 9600. It wedges at the
15868 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
15869 # on keyboard don't work. You have to hit BREAK twice to get
15870 # one break at any speed - this is a documented feature.
15871 # Can't use cursor motion because it's memory relative, and
15872 # because it only works in the workspace, not the monitor.
15873 # Same for home. Likewise, standout only works in the workspace.
15875 # <el> was commented out since vi and rogue seem to work better
15876 # simulating it with lots of spaces!
15878 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
15879 # and didn't seem necessary.
15881 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
15883 cols#80, it#8, lines#34, lm#0,
15884 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
15885 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
15886 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
15887 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
15888 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
15889 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
15890 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
15892 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15893 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
15894 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
15895 tek4025-17|tek 4025 17 line window,
15896 lines#17, use=tek4025,
15897 tek4025-17-ws|tek 4025 17 line window in workspace,
15898 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
15899 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
15900 smso=\037att e\r, use=tek4025-17,
15901 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
15902 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
15903 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15905 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
15906 # The following status modes are assumed for normal operation (replace the
15907 # initial "!" by whatever the current command character is):
15908 # !COM 29 # NOTE: changes command character to GS (^])
15914 # ^]STO 9 17 25 33 41 49 57 65 73
15915 # Other modes may be set according to communication requirements.
15916 # If the command character is inadvertently changed, termcap can't restore it.
15917 # Insert-character cannot be made to work on both top and bottom rows.
15918 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
15919 # There also seems to be a problem with vertical motion, perhaps involving
15920 # delete/insert-line, following a typed carriage return. This terminal sucks.
15921 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15922 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
15923 # work any more. -- esr)
15924 tek4025a|Tektronix 4025A,
15925 OTbs, OTpt, am, bw, da, db, xon,
15926 cols#80, it#8, lines#34,
15927 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
15928 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
15929 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
15930 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
15931 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
15932 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
15933 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
15934 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
15936 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
15937 # Here's the command file that I use to get rogue to work on the 4025.
15938 # It should work with any program using the old curses (e.g. it better
15939 # not try to scroll, or cursor addressing won't work. Also, you can't
15941 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
15942 tek4025-cr|tek 4025 for curses and rogue,
15944 cols#80, it#8, lines#33,
15945 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
15946 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
15947 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15948 rmcup=\037wor 0, smcup=\037wor 33h,
15949 # next two lines commented out since curses only allows 128 chars, sigh.
15950 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
15951 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
15952 tek4025ex|4025ex|4027ex|tek 4025 w/!,
15953 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
15954 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15955 tek4105|tektronix 4105,
15956 OTbs, am, mir, msgr, ul, xenl, xt,
15957 cols#79, it#8, lines#29,
15958 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
15959 clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
15960 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
15961 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15962 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
15963 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
15964 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
15965 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
15966 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
15967 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
15968 smul=\E[=5;<2m, tbc=\E[1g,
15970 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
15971 tek4105-30|4015 emulating 30 line vt100,
15972 am, mir, msgr, xenl, xon,
15973 cols#80, it#8, lines#30, vt#3,
15974 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15975 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15976 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15977 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15978 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15979 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15980 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
15981 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
15982 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
15983 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15984 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15985 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15986 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
15987 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15988 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15991 # Tektronix 4105 from BRL
15992 # The following setup modes are assumed for normal operation:
15993 # CODE ansi CRLF no DABUFFER 141
15994 # DAENABLE yes DALINES 30 DAMODE replace
15995 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
15996 # FLAGGING input INSERTREPLACE replace LFCR no
15997 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
15998 # SELECTCHARSET G1 0 TABS -2
15999 # Other setup modes may be set for operator convenience or communication
16000 # requirements; I recommend
16001 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16002 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16003 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16004 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
16005 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16006 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
16008 # and factory color maps. After setting these modes, save them with NVSAVE. No
16009 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16010 # "IC" cannot be used in combination with "im" & "ei".
16011 # "tek4105a" is just a guess:
16012 tek4105a|Tektronix 4105,
16013 OTbs, OTpt, msgr, xon,
16014 OTkn#8, cols#80, it#8, lines#30, vt#3,
16015 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16016 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16017 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16018 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16019 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16020 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16021 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16022 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16023 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16024 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16025 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16026 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16027 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16028 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16029 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16030 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16031 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16032 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16035 # Tektronix 4106/4107/4109 from BRL
16036 # The following setup modes are assumed for normal operation:
16037 # CODE ansi COLUMNMODE 80 CRLF no
16038 # DABUFFER 141 DAENABLE yes DALINES 32
16039 # DAMODE replace DAVISIBILITY yes ECHO no
16040 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
16041 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
16042 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
16044 # Other setup modes may be set for operator convenience or communication
16045 # requirements; I recommend
16046 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16047 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16048 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16049 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
16050 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16051 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
16053 # and factory color maps. After setting these modes, save them with NVSAVE. No
16054 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16055 # "IC" cannot be used in combination with "im" & "ei".
16056 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
16058 cols#80, it#8, lines#32, vt#3,
16059 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16060 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16061 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16062 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16063 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16064 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16065 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16066 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16067 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16068 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16069 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16070 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16071 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16072 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16073 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16074 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16075 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16076 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
16078 tek4107|tek4109|tektronix terminals 4107 4109,
16079 OTbs, am, mir, msgr, ul, xenl, xt,
16080 cols#79, it#8, lines#29,
16081 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
16082 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
16083 cub1=^H, cud1=^J, cuf1=\EC,
16084 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
16085 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
16086 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16087 rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
16088 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
16089 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
16090 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
16091 smul=\E%!1\E[4m$<2>\E%!0,
16092 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
16093 # see the note attached to tek4207.
16094 tek4207-s|Tektronix 4207 with sysline but no memory,
16096 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
16097 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16098 is2=\E7\E[?6l\E[2K\E[?6h\E8,
16099 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16101 # The 4110 series may be a wonderful graphics series, but they make the 4025
16102 # look good for screen editing. In the dialog area, you can't move the cursor
16103 # off the bottom line. Out of the dialog area, ^K moves it up, but there
16104 # is no way to scroll.
16106 # Note that there is a floppy for free from Tek that makes the
16107 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16108 # an expected enhancement that will use ANSI standard sequences.
16110 # 4112 in non-dialog area pretending to scroll. It really wraps
16111 # but vi is said to work (more or less) in this mode.
16113 # 'vi' works reasonably well with this entry.
16115 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
16118 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
16119 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
16120 # The 4112 with the ANSI compatibility enhancement
16121 tek4112|tek4114|tektronix 4110 series,
16124 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
16125 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
16126 ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
16127 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
16128 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16129 tek4112-nd|4112 not in dialog area,
16131 cuu1=^K, use=tek4112,
16132 tek4112-5|4112 in 5 line dialog area,
16133 lines#5, use=tek4112,
16134 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
16135 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
16136 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
16137 # previously \0410 and \0411 sequences...I don't *think* they were supposed
16138 # to be 4-digit octal -- esr)
16139 tek4113|tektronix 4113 color graphics with 5 line dialog area,
16142 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
16143 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16144 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
16145 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
16147 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16148 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
16149 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16150 # :vb: needs enough delay to let you see the background color being toggled.
16151 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16153 cols#80, it#8, lines#34,
16154 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16156 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16157 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16158 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16159 # This entry is from Tek. Inc. (Brian Biehl)
16160 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16161 otek4115|Tektronix 4115,
16162 OTbs, am, da, db, eo,
16163 cols#80, it#8, lines#34,
16164 cbt=\E[Z, clear=\E[H\E[2J,
16165 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16166 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16167 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16168 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16170 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16171 kbs=^H, ri=\EM, rmam=\E[?7l,
16172 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16173 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16174 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16176 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16179 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16180 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16181 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16182 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16183 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16184 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16185 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16186 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16187 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16188 rmso=\E[m, rmul=\E[m,
16189 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
16190 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16191 vpa=\E[%p1%{1}%+%dd,
16192 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16193 # command is ignored. The following entry replaces <csr> with the needed
16194 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16195 # chokes on; and adds a lot of initialization for the tek dialog area.
16196 # Note that this entry uses all 34 lines and sets the cursor color to green.
16197 # Steve Jacobson 8/85
16198 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16199 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16200 tek4125|tektronix 4125,
16202 csr@, dl1=\E[1M, il1=\E[1L,
16203 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16204 rc@, sc@, smkx=\E=, use=vt100,
16206 # From: <jcoker@ucbic>
16207 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16208 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16209 # note that if jcoker wasn't confused you may be able to use this one.
16210 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16211 tek4207|Tektronix 4207 graphics terminal with memory,
16212 am, bw, mir, msgr, ul, xenl,
16213 cols#80, it#8, lines#32,
16214 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16215 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16216 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16217 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16218 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16219 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16220 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16221 rev=\E[7m, ri=\E[T,
16222 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16223 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16224 smul=\E[4m, tbc=\E[1g,
16226 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16227 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16228 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16229 tek4404|tektronix 4404,
16231 cols#80, it#8, lines#32,
16232 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16233 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16234 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16235 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16236 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16237 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16238 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16239 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16240 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16241 # Some unknown person wrote:
16242 # I added the is string - straight Unix has ESC ; in the login
16243 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16244 # mode). The is string here cleans up a few things (but not
16246 ct8500|tektronix ct8500,
16249 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16250 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16251 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16252 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16253 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16255 # Tektronix 4205 terminal.
16257 # am is not defined because the wrap around occurs not when the char.
16258 # is placed in the 80'th column, but when we are attempting to type
16259 # the 81'st character on the line. (esr: hmm, this is like the vt100
16260 # version of xenl, perhaps am + xenl would work!)
16262 # Bold, dim, and standout are simulated by colors and thus not allowed
16263 # with colors. The tektronix color table is mapped into the RGB color
16264 # table by setf/setb. All colors are reset to factory specifications by oc.
16265 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16266 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16267 # interval then maps into pre-defined value.
16268 tek4205|tektronix 4205,
16270 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16271 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16272 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16273 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16274 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16275 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16276 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
16277 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
16278 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
16279 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16280 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16281 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16282 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16284 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16285 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16286 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16287 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16288 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16289 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16290 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16291 smul=\E[4m, tbc=\E[1g,
16293 #### Teletype (tty)
16295 # These are the hardcopy Teletypes from before AT&T bought the company,
16296 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16297 # pulpy yellow roll paper. If you remember these you go back a ways.
16298 # Teletype-branded VDTs are listed in the AT&T section.
16300 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16301 # other programs still default to emitting codes for the Model 37.
16304 tty33|tty35|model 33 or 35 teletype,
16307 bel=^G, cr=^M, cud1=^J, ind=^J,
16308 tty37|model 37 teletype,
16310 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16313 # There are known to be at least three flavors of the tty40, all seem more
16314 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16315 # awful braindamage, such as printing a visible newline indicator after each
16316 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16317 # braindamaged but has hope and is described here. The 40-4 is a 3270
16318 # lookalike and beyond hope. The terminal has visible bell but I don't know
16319 # it - it's null here to prevent it from showing the BL character.
16320 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16321 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16322 # to get crlf, even if <cr> is not ^M.)
16323 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16324 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16327 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16328 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16329 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16330 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16331 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16332 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16333 tty43|model 43 teletype,
16334 OTbs, am, hc, os, xon,
16336 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16341 # You can add <is2=\E<> to put this 40-column mode, though I can't
16342 # for the life of me think why anyone would want to.
16343 scanset|sc410|sc415|Tymshare Scan Set,
16346 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16347 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16348 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16349 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16350 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16352 #### Volker-Craig (vc)
16354 # If you saw a Byte Magazine cover with a terminal on it during the early
16355 # 1980s, it was probably one of these. Carl Helmers liked them because
16356 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16357 # to program one...)
16360 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16361 # every other linefeed.
16362 vc303|vc103|vc203|volker-craig 303,
16365 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16366 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16367 kcuu1=^N, ll=\017$<1>W,
16368 vc303a|vc403a|volker-craig 303a,
16369 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16370 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16371 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16372 vc404|volker-craig 404,
16375 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16376 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16377 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16378 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16379 vc404-s|volker-craig 404 w/standout mode,
16380 cud1=^J, rmso=^O, smso=^N, use=vc404,
16381 # From: <wolfgang@cs.sfu.ca>
16382 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16383 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16386 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16387 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16388 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16389 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16390 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16391 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16392 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16393 rmso=\E^_, smso=\E^Y,
16394 vc415|volker-craig 415,
16395 clear=^L, use=vc404,
16397 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16400 #### IBM PC and clones
16403 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16404 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16405 # doesn't support scrolling regions, ignores add line commands, and ignores
16406 # delete line commands. Consequently, the resulting behavior looks like a
16407 # crude adm3a-type terminal.
16408 # Steve Jacobson 8/85
16409 pcplot|pc-plot terminal emulation program,
16411 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16412 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16413 # I've found that my KayPro II, running MDM730, continues to emulate an
16414 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16415 # system the following termcap entry works well:
16416 # I have noticed a couple of minor glitches, but nothing I can't work
16417 # around. (I added two capabilities from the BRL entry -- esr)
16418 kaypro|kaypro2|kaypro II,
16421 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16422 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16423 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16425 # From IBM, Thu May 5 19:35:27 1983
16426 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16427 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16430 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16431 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16433 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16434 OTbs, am, bw, eo, hs, km, msgr, ul,
16435 cols#80, it#8, lines#24,
16436 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16437 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16438 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16439 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16440 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16441 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16442 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16443 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16444 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16445 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16446 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16447 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16448 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16449 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
16450 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16454 # Apple II firmware console first, then various 80-column cards and
16455 # terminal emulators. For two cents I'd toss all these in the UFO file
16456 # along with the 40-column apple entries.
16459 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16460 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16461 # function of TIC, not the firmware.
16462 # The clear key on a IIgs will do something like clear-screen,
16463 # depending on what you're in.
16464 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16465 OTbs, am, bw, eo, msgr,
16466 cols#80, it#8, lines#24,
16467 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16468 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16469 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16470 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16472 # Apple //e with 80-column card, entry from BRL
16473 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16474 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16475 # Auto-wrap does not work right due to newline scrolling delay, which also
16476 # requires that you set "stty cr2".
16477 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16478 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16479 # using a terminal emulation program instead of the built-in firmware.
16483 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16484 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16485 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16486 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16488 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16489 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16490 apple2e-p|Apple //e via Pascal,
16491 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16492 kcud1=^J, use=apple2e,
16493 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16494 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16495 apple-ae|ASCII Express,
16496 OTbs, am, bw, msgr, nxon, xon,
16497 cols#80, it#8, lines#24,
16498 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16499 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16500 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16501 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16503 appleII|apple ii plus,
16505 cols#80, it#8, lines#24,
16506 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16507 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16508 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16509 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16511 # Originally by Gary Ford 21NOV83
16512 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16513 apple-80|apple II with smarterm 80 col,
16516 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
16517 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
16518 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
16519 apple-soroc|apple emulating soroc 120,
16522 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16523 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
16524 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16525 # From Peter Harrison, Computer Graphics Lab, San Francisco
16526 # ucbvax!ucsfmis!harrison .....uucp
16527 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
16528 # "These two work. If you don't have the inverse video chip for the
16529 # Apple with videx then remove the :so: and :se: fields."
16530 # (apple-videx: this used to be called DaleApple -- esr)
16531 apple-videx|Apple with videx videoterm 80 column board with inverse video,
16533 cols#80, it#8, lines#24,
16534 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
16535 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16536 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
16537 rmso=^Z2, sgr0=^Z2, smso=^Z3,
16538 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
16539 # Apple Cat ][ 212 modem, + more all
16540 # controlled by ASCII Express: Pro.
16541 # From Dave Shaver <isucs1!shaver>
16542 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
16545 acsc=, clear=^L, cuf1=^\,
16546 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16547 flash=^W35^W06, home=^Y,
16548 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
16550 apple-uterm|Ultraterm for Apple micros,
16553 acsc=, clear=^L, cuf1=^\,
16554 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16555 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
16556 # from trwrba!bwong (Bradley W. Wong):
16558 # This entry assumes that you are using an apple with the UCSD Pascal
16559 # language card. SYSTEM.MISCINFO is assumed to be the same as that
16560 # supplied with the standard apple except that screenwidth should be set
16561 # using SETUP to 80 columns. Note that the right arrow in not mapped in
16562 # this termcap entry. This is because that key, on the Apple, transmits
16563 # a ^U and would thus preempt the more useful "up" function of vi.
16566 apple80p|80-column apple with Pascal card,
16569 clear=^Y^L, cuf1=^\\:,
16570 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16573 # Apple II+ equipped with Videx 80 column card
16575 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
16576 # manually converted by D A Gwyn
16578 # DO NOT use any terminal emulation with this data base, it works directly
16579 # with the Videx card. This has been tested with vi 1200 baud and works fine.
16581 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
16582 # 1 screen, while in R2 ^U doesn't.
16583 # For inverse alternate character set add:
16584 # <smacs>=^O:<rmacs>=^N:
16585 # (apple-v: added it#8 -- esr)
16586 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
16588 cols#80, it#8, lines#24,
16589 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
16590 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
16591 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
16592 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
16593 khome=^Y, rmso=^Z2, smso=^Z3,
16594 apple-videx3|vapple|Apple II with 80 col card,
16597 clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16598 cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16599 kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
16600 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
16601 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
16602 aepro|Apple II+ running ASCII Express Pro--vt52,
16605 clear=\014$<300/>, cuf1=\EC,
16606 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16608 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
16609 apple-vm80|ap-vm80|apple with viewmax-80,
16612 clear=\014$<300/>, cuf1=^\\:,
16613 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
16614 ed=\013$<300/>, el=^], home=\031$<200/>,
16616 #### Apple Lisa & Macintosh
16619 # (lisa: changed <cvvis> to <cnorm> -- esr)
16620 lisa|apple lisa console display (black on white),
16621 OTbs, am, eo, msgr,
16622 cols#88, it#8, lines#32,
16623 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
16624 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
16625 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16626 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
16627 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16628 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
16629 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
16630 liswb|apple lisa console display (white on black),
16631 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
16632 smso=\E[m, smul=\E[4m, use=lisa,
16634 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
16635 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
16637 # These entries assume that the 'Auto Wraparound' is enabled.
16638 # Xon-Xoff flow control should also be enabled.
16640 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
16641 # settings are in non-volatile memory and don't need to be reset upon login.
16642 # Also setting the number of columns glitches the screen annoyingly.
16643 # You can type "reset" to get them set.
16645 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
16646 OTbs, OTpt, am, xenl, xon,
16647 OTkn#4, cols#80, it#8, lines#24, vt#3,
16648 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
16649 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16650 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16651 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
16652 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
16653 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
16654 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
16655 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16656 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
16657 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16659 # Lisaterm in 132 column ("wide") mode.
16660 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
16662 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
16663 # Although MacTerminal has insert/delete line, it is commented out here
16664 # since it is much faster and cleaner to use the "lock scrolling region"
16665 # method of inserting and deleting lines due to the MacTerminal implementation.
16666 # Also, the "Insert/delete ch" strings have an extra character appended to them
16667 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
16668 # supported by MacTerminal.
16669 mac|macintosh|Macintosh with MacTerminal,
16672 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
16673 # Lisaterm in 132 column ("wide") mode.
16674 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
16677 # nsterm*|Apple_Terminal - AppKit Terminal.app
16679 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
16680 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
16681 # Server and Mac OS X operating systems. There is also a
16682 # "terminal.app" in GNUStep, but I believe it to be an unrelated
16683 # codebase and I have not attempted to describe it here.
16685 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
16686 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
16687 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
16688 # version supports color.
16690 # To determine the version of Terminal.app you're using by running:
16692 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
16694 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
16696 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
16698 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
16700 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
16702 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
16703 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
16704 # might work too, but really you're on your own here since these
16705 # systems are very obsolete and I can't test them. I do welcome
16706 # patches, though :).
16710 # For GNUstep_Terminal, you're probably best off using "linux" or
16711 # writing your own terminfo.
16713 # For MacTelnet, you're on your own. It's a different codebase, and
16714 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
16716 # For iTerm.app, see "iterm".
16719 # The AppKit Terminal.app descriptions all have names beginning with
16720 # "nsterm". Note that the statusline (-s) versions use the window
16721 # titlebar as a phony status line, and may produce warnings during
16722 # compilation as a result ("tsl uses 0 parameters, expected 1".)
16723 # Ignore these warnings, or even ignore these entries entirely. Apps
16724 # which need to position the cursor or do other fancy stuff inside the
16725 # status line won't work with these entries. They're primarily useful
16726 # for programs like Pine which provide simple notifications in the
16727 # status line. Please note that non-ASCII characters don't work right
16728 # in the status line, since Terminal.app incorrectly interprets their
16729 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
16730 # versions) or only accepts status lines consisting entirely of
16731 # characters from the first 256 Unicode positions (including C1 but
16734 # The Mythology* of AppKit Terminal.app:
16736 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
16737 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
16738 # shareware replacement for Terminal called "Stuart" which NeXT bought
16739 # and used as the basis for the Terminal.app in NeXTstep 2+,
16740 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
16741 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
16742 # capabilities for the early versions, but I believe that the
16743 # TERM_PROGRAM_VERSION may have been reset at some point.
16745 # The early versions were tailored to the NeXT character set. Sometime
16746 # after the Apple aquisition the encoding was swiched to MacRoman
16747 # (initally with serious altcharset bugs due to incomplete conversion
16748 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
16749 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
16750 # 8-color support (initially buggy when combined with attributes, but
16751 # that was later fixed.) More recently, around Mac OS X version 10.3
16752 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
16753 # some versions (for instance 133-1 which shipped with Mac OS X
16754 # version 10.4) this suffered from the <bce> bug, but that seems to
16755 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
16757 # In the early days of Mac OS X the terminal was fairly buggy and
16758 # would routinely crash under load. Many of these bugs seem to have
16759 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
16760 # some may still remain. This change seems to correspond to
16761 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
16762 # it did previously.
16764 # * This may correspond with what actually happened, but I don't
16765 # know. It is based on guesswork, hearsay, private correspondence,
16766 # my faulty memory, and the following online sources and references:
16768 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
16769 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
16771 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
16772 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
16774 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
16775 # "nsterm" to comply with the name length and case conventions and
16776 # limitations of various software packages [notably Solaris terminfo
16777 # and UNIX.] A single Apple_Terminal alias is retained for
16778 # backwards-compatbility.
16780 # * Added function key support (F1-F4). These only work in Terminal.app
16781 # version 51, hopefully the capabilities won't cause problems for people
16782 # using version 41.
16784 # * Added "full color" (-c) entries which support the 16-color mode in
16787 # * By default, version 51 uses UTF-8 encoding with broken altcharset
16788 # support, so "ASCII" (-7) entries without altcharset support were
16791 # nsterm - AppKit Terminal.app
16793 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
16794 # Terminal.app. It is a partial VT100 emulation with some xterm-like
16795 # extensions. This terminfo was written to describe versions 41
16796 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
16797 # version 10.1) of Terminal.app.
16799 # Terminal.app runs under the Mac OS X Quartz windowing system (and
16800 # other AppKit-supported windowing systems.) On the Mac OS X machine I
16801 # use, the executable for Terminal.app is:
16802 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
16804 # If you're looking for a description of the full-screen system
16805 # console which runs under Apple's Darwin operating system on PowerPC
16806 # platforms, see the "xnuppc" entry instead.
16808 # There were no function keys in version 41. In version 51, there are
16809 # four working function keys (F1, F2, F3 and F4.) The function keys
16810 # are included in all of these entries.
16812 # It does not support mouse pointer position reporting. Under some
16813 # circumstances the cursor can be positioned using option-click; this
16814 # works by comparing the cursor position and the selected position,
16815 # and simulating enough cursor-key presses to move the cursor to the
16816 # selected position. This technique fails in all but the simplest
16819 # It provides partial ANSI color support (background colors interacted
16820 # badly with bold in version 41, though, as reflected in :ncv:.) The
16821 # monochrome (-m) entries are useful if you've disabled color support
16822 # or use a monochrome monitor. The full color (-c) entries are useful
16823 # in version 51, which doesn't exhibit the background color bug. They
16824 # also enable an xterm-compatible 16-color mode.
16826 # The configurable titlebar is set using xterm-compatible sequences;
16827 # it is used as a status bar in the statusline (-s) entries. Its width
16828 # depends on font sizes and window sizes, but 50 characters seems to
16829 # be the default for an 80x24 window.
16831 # The MacRoman character encoding is used for some of the alternate
16832 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
16833 # disable alternate character set support entirely, and the "VT100"
16834 # (-acs) entries rely instead on Terminal.app's own buggy VT100
16835 # graphics emulation, which seems to think the character encoding is
16836 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
16837 # are useful in Terminal.app version 51, which supports UTF-8 and
16838 # other ASCII-compatible character encodings but does not correctly
16839 # implement VT100 graphics; once VT100 graphics are correctly
16840 # implemented in Terminal.app, the "VT100" (-acs) entries should be
16841 # usable in any ASCII-compatible character encoding [except perhaps
16842 # in UTF-8, where some experts argue for disallowing alternate
16843 # characters entirely.]
16845 # Terminal.app reports "vt100" as the terminal type, but exports
16846 # several environment variables which may aid detection in a shell
16847 # profile (i.e. .profile or .login):
16850 # TERM_PROGRAM=Apple_Terminal
16851 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
16852 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
16854 # For example, the following Bourne shell script would detect the
16855 # correct terminal type:
16857 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
16860 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
16862 # TERM="nsterm-old"
16864 # TERM="nsterm-c-7"
16868 # In a C shell derivative, this would be accomplished by:
16870 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
16871 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
16872 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
16873 # setenv TERM "nsterm-old"
16875 # setenv TERM "nsterm-c-7"
16880 # The '+' entries are building blocks
16881 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
16882 am, bw, msgr, xenl, xon,
16883 cols#80, it#8, lines#24,
16884 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16885 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16886 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16887 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16888 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
16889 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16890 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
16891 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
16892 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16893 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16894 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
16895 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16896 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
16898 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
16899 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16900 enacs=\E(B\E)0, rmacs=^O,
16901 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
16902 smacs=^N, use=nsterm+7,
16904 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
16905 acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
16906 enacs=\E(B\E)0, rmacs=^O,
16907 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
16908 smacs=^N, use=nsterm+7,
16910 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
16913 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
16915 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
16916 op=\E[0m, use=ibm+16color,
16918 nsterm+c41|AppKit Terminal.app v41 color support,
16919 colors#8, ncv#37, pairs#64,
16920 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16922 # These are different combinations of the building blocks
16924 # ASCII charset (-7)
16925 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
16928 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
16929 use=nsterm+s, use=nsterm+7,
16931 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
16932 use=nsterm+c41, use=nsterm+7,
16934 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
16935 use=nsterm+c, use=nsterm+7,
16937 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
16938 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
16940 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
16941 use=nsterm+s, use=nsterm+c, use=nsterm+7,
16943 # VT100 alternate-charset (-acs)
16944 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
16947 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
16948 use=nsterm+s, use=nsterm+acs,
16950 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
16951 use=nsterm+c41, use=nsterm+acs,
16953 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
16954 use=nsterm+c, use=nsterm+acs,
16956 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
16957 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
16959 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
16960 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
16963 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
16966 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
16967 use=nsterm+s, use=nsterm+mac,
16969 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
16970 use=nsterm+c41, use=nsterm+mac,
16972 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
16973 use=nsterm+c, use=nsterm+mac,
16975 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
16976 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
16978 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
16979 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
16981 # In Mac OS X version 10.5 the format of the preferences has changed
16982 # and a new, more complex technique is needed, e.g.,
16984 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
16985 # "NSUserDefaults");ud=NSUserDefaults.alloc();
16986 # ud.init();prefs=ud.persistentDomainForName_(
16987 # "com.apple.Terminal");prefs["Window Settings"][
16988 # prefs["Default Window Settings"]]["TerminalType"
16989 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
16990 # "com.apple.Terminal")' nsterm-16color
16992 # and it is still not settable from the preferences dialog. This is
16993 # tracked under rdar://problem/7365108 and rdar://problem/7365134
16994 # in Apple's bug reporter.
16995 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
16997 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
16998 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
16999 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
17000 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17001 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17002 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
17003 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
17004 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
17005 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
17006 use=nsterm-c-s-acs,
17008 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
17009 # the background color erase bug. The newer version 240.2 in Mac OS X
17010 # version 10.5 does not.
17012 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
17013 # and D P Schreber comparing to nsterm-c-s-acs.
17015 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
17016 # can be set in Terminal.app, e.g.,
17018 # defaults write com.apple.Terminal TermCapString nsterm-bce
17020 # and that it is not set in Terminal's preferences dialog.
17021 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
17022 bce, bw, use=nsterm-16color,
17024 # This is an alias which should always point to the "current" version
17025 nsterm|Apple_Terminal|AppKit Terminal.app,
17026 use=nsterm-16color,
17028 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
17029 # more featureful) terminal emulator for Mac OS X. It is similar
17030 # enough in capabilities to nsterm-16color that I have derived this
17031 # description from that one, but as far as I know they share no code.
17032 # Many of the features are user-configurable, but I attempt only to
17033 # describe the default configuration.
17035 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
17037 iTerm.app|iTerm.app terminal emulator for Mac OS X,
17039 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17040 use=nsterm-16color,
17042 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
17044 # On PowerPC platforms, Apple's Darwin operating system uses a
17045 # full-screen system console derived from a NetBSD framebuffer
17046 # console. It is an ANSI-style terminal, and is not really VT-100
17049 # Under Mac OS X, this is the system console driver used while in
17050 # single-user mode [reachable by holding down Command-S during the
17051 # boot process] and when logged in using console mode [reachable by
17052 # typing ">console" at the graphical login prompt.]
17054 # If you're looking for a description of the Terminal.app terminal
17055 # emulator which runs under the Mac OS X Quartz windowing system (and
17056 # other AppKit-supported windowing systems,) see the "nsterm"
17059 # NOTE: Under Mac OS X version 10.1, the default login window does not
17060 # prompt for user name, instead requiring an icon to be selected from
17061 # a list of known users. Since the special ">console" login is not in
17062 # this list, you must make one of two changes in the Login Window
17063 # panel of the Login section of System Prefs to make the special
17064 # ">console" login accessible. The first option is to enable 'Show
17065 # "Other User" in list for network users', which will add a special
17066 # "Other..." icon to the graphical login panel. Selecting "Other..."
17067 # will present the regular graphical login prompt. The second option
17068 # is to change the 'Display Login Window as:' setting to 'Name and
17069 # password entry fields', which replaces the login panel with a
17070 # graphical login prompt.
17072 # There are no function keys, at least not in Darwin 1.3.
17074 # It has no mouse support.
17076 # It has full ANSI color support, and color combines correctly with
17077 # all three supported attributes: bold, inverse-video and underline.
17078 # However, bold colored text is almost unreadable (bolding is
17079 # accomplished using shifting and or-ing, and looks smeared) so bold
17080 # has been excluded from the list of color-compatible attributes
17081 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17082 # monochrome monitor.
17084 # There is one serious bug with this terminal emulation's color
17085 # support: repositioning the cursor onto a cell with non-matching
17086 # colors obliterates that cell's contents, replacing it with a blank
17087 # and displaying a colored cursor in the "current" colors. There is
17088 # no complete workaround at present [other than using the monochrome
17089 # (-m) entries,] but removing the (msgr) capability seemed to help.
17091 # The "standout" chosen was simple reverse-video, although a colorful
17092 # standout might be more aesthetically pleasing. Similarly, the bold
17093 # chosen is the terminal's own smeared bold, although a simple
17094 # color-change might be more readable. The color-bold (-b) entries
17095 # uses magenta colored text for bolding instead. The fancy color (-f
17096 # and -f2) entries use color for bold, standout and underlined text
17097 # (underlined text is still underlined, though.)
17099 # Apparently the terminal emulator does support a VT-100-style
17100 # alternate character set, but all the alternate character set
17101 # positions have been left blank in the font. For this reason, no
17102 # alternate character set capabilities have been included in this
17103 # description. The console driver appears to be ASCII-only, so (enacs)
17104 # has been excluded [although the VT-100 sequence does work.]
17106 # The default Mac OS X and Darwin installation reports "vt100" as the
17107 # terminal type, and exports no helpful environment variables. To fix
17108 # this, change the "console" entry in /etc/ttys from "vt100" to
17109 # "xnuppc-WxH", where W and H are the character dimensions of your
17110 # console (see below.)
17112 # The font used by the terminal emulator is apparently one originally
17113 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
17114 # file includes descriptions for the following geometries:
17116 # Pixels Characters Entry Name (append -m for monochrome)
17117 # -------------------------------------------------------------------
17118 # 640x400 80x25 xnuppc-80x25
17119 # 640x480 80x30 xnuppc-80x30
17120 # 720x480 90x30 xnuppc-90x30
17121 # 800x600 100x37 xnuppc-100x37
17122 # 896x600 112x37 xnuppc-112x37
17123 # 1024x640 128x40 xnuppc-128x40
17124 # 1024x768 128x48 xnuppc-128x48
17125 # 1152x768 144x48 xnuppc-144x48
17126 # 1280x1024 160x64 xnuppc-160x64
17127 # 1600x1024 200x64 xnuppc-200x64
17128 # 1600x1200 200x75 xnuppc-200x75
17129 # 2048x1536 256x96 xnuppc-256x96
17131 # The basic "xnuppc" entry includes no size information, and the
17132 # emulator includes no reporting capability, so you'll be at the mercy
17133 # of the TTY device (which reports incorrectly on my hardware.) The
17134 # color-bold entries do not include size information.
17136 # The '+' entries are building blocks
17137 xnuppc+basic|Darwin PowerPC Console basic capabilities,
17138 am, bce, mir, xenl,
17140 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17141 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17142 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17143 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
17144 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
17145 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17146 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
17147 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17149 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17150 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17151 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17153 xnuppc+c|Darwin PowerPC Console ANSI color support,
17154 colors#8, ncv#32, pairs#64,
17155 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17157 xnuppc+b|Darwin PowerPC Console color-bold support,
17160 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17163 xnuppc+f|Darwin PowerPC Console fancy color support,
17165 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
17166 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17168 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
17171 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
17172 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17174 # Building blocks for specific screen sizes
17175 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
17178 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
17181 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
17184 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
17185 cols#100, lines#37,
17187 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
17188 cols#112, lines#37,
17190 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
17191 cols#128, lines#40,
17193 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
17194 cols#128, lines#48,
17196 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
17197 cols#144, lines#48,
17199 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
17200 cols#160, lines#64,
17202 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
17203 cols#200, lines#64,
17205 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
17206 cols#200, lines#75,
17208 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
17209 cols#256, lines#96,
17211 # These are different combinations of the building blocks
17213 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
17216 xnuppc|darwin|Darwin PowerPC Console (color),
17217 use=xnuppc+c, use=xnuppc+basic,
17219 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
17222 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
17223 use=xnuppc+b, use=xnuppc+c,
17225 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
17228 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
17229 use=xnuppc+f, use=xnuppc+c,
17231 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
17234 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
17235 use=xnuppc+f2, use=xnuppc+c,
17237 # Combinations for specific screen sizes
17238 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
17239 use=xnuppc+80x25, use=xnuppc+basic,
17241 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
17242 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17244 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
17245 use=xnuppc+80x30, use=xnuppc+basic,
17247 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
17248 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17250 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
17251 use=xnuppc+90x30, use=xnuppc+basic,
17253 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
17254 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17256 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
17257 use=xnuppc+100x37, use=xnuppc+basic,
17259 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
17260 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17262 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
17263 use=xnuppc+112x37, use=xnuppc+basic,
17265 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
17266 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17268 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
17269 use=xnuppc+128x40, use=xnuppc+basic,
17271 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
17272 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17274 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
17275 use=xnuppc+128x48, use=xnuppc+basic,
17277 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
17278 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17280 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
17281 use=xnuppc+144x48, use=xnuppc+basic,
17283 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17284 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17286 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17287 use=xnuppc+160x64, use=xnuppc+basic,
17289 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17290 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17292 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17293 use=xnuppc+200x64, use=xnuppc+basic,
17295 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17296 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17298 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17299 use=xnuppc+200x75, use=xnuppc+basic,
17301 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17302 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17304 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17305 use=xnuppc+256x96, use=xnuppc+basic,
17307 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17308 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17310 #### Radio Shack/Tandy
17313 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17314 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17315 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17316 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17318 cols#80, it#8, lines#24,
17319 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17320 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17321 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17322 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17323 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17324 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17325 # (trs2: removed obsolete ":nl=^_:" -- esr)
17326 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17328 cols#80, it#8, lines#24,
17329 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17330 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17331 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17332 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17333 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17334 # (This had extension capabilities
17335 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17336 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17337 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17338 trs16|trs-80 model 16 console,
17340 cols#80, it#8, lines#24,
17341 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17342 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17343 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17344 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17345 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17346 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17347 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17348 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17349 smacs=\ERG, smso=\ERD,
17354 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
17357 cols#80, it#8, lines#25,
17358 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
17359 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17360 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
17361 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
17362 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
17363 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
17364 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
17366 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
17368 # MiNT VT52 emulation. 80 columns, 25 rows.
17369 # MiNT is Now TOS, the operating system which comes with all Ataris now
17370 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
17371 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
17372 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
17373 st52|Atari ST with VT52 emulation,
17376 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
17377 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17378 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
17379 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
17380 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
17381 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
17382 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
17383 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
17384 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
17385 smcup=\Ee, smso=\Ep,
17387 #### Commodore Business Machines
17389 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17390 # after years of shaky engineering and egregious mismanagement. Made one
17391 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17392 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17393 # ever (most units sold); they can still be found gathering dust in closets
17397 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17398 # Added a few more entries, converted caret-type control sequence (^x) entries
17399 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17400 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17402 # :as:, :ae: Support for alternate character sets.
17403 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17404 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17405 # This one appears to fix a problem I always had with a line ending
17406 # at 'width+1' (I think) followed by a blank line in vi. The blank
17407 # line tended to disappear and reappear depending on how the screen
17408 # was refreshed. Note that this is probably needed only if you use
17409 # something like a Dnet Fterm with the window sized to some peculiar
17410 # dimension larger than 80 columns.
17411 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17412 # (amiga: removed obsolete :kn#10:,
17413 # also added empty <acsc> to suppress a warning --esr)
17415 OTbs, am, bw, xenl,
17417 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17418 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17419 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17420 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17421 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17422 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17423 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17424 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17425 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17426 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17427 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17428 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17429 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17431 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17432 # (amiga: added empty <acsc> to suppress a warning.
17433 # I'm told this entry screws up badly with AS225, the Amiga
17434 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17435 amiga-h|Hans Verkuil's Amiga ANSI,
17438 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17439 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17440 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17441 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17442 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17443 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17444 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17445 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17446 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17447 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17448 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17449 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17450 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17451 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17452 smso=\2337m, smul=\2334m,
17454 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17456 # Pavel Fedin added
17461 amiga-8bit|Amiga ANSI using 8-bit controls,
17462 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17463 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17464 kpp=\233T, ri=\215, rin@, use=amiga-h,
17466 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17467 # requires use of appropriate preferences settings.
17468 amiga-vnc|Amiga using VNC console (black on light gray),
17469 am, da, db, msgr, ndscr,
17470 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17471 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17472 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17473 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17474 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17476 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17477 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17478 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17479 indn=\E[%p1%dS, invis=\E8m,
17480 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17481 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17482 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17483 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17484 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17485 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17486 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17487 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17488 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17489 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17490 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17491 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17492 smso=\E[1m, smul=\E[4m,
17494 # MorphOS on Genesi Pegasos
17495 # By Pavel Fedin <sonic_amiga@rambler.ru>
17497 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17498 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17499 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17500 ri=\215, rin@, use=amiga-h,
17502 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17503 # I'm trying to write a termcap for a commodore b-128, and I'm
17504 # having a little trouble. I've had to map most of my control characters
17505 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17506 # and create some functions (like cm), but thats life.
17507 # The problem is with the arrow keys - right, and up work fine, but
17508 # left deletes the previous character and down I just can't figure out.
17509 # Jove knows what I want, but I don't know what it's sending to me (it
17510 # isn't thats bound to next-line in jove).
17511 # Anybody got any ideas? Here's my termcap.
17512 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17514 commodore|b-128|Commodore B-128 micro,
17516 OTdN#20, cols#80, lines#24, pb#150,
17517 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17518 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17519 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17520 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17521 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17526 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17527 northstar|North Star Advantage,
17531 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17532 el=\016$<200/>, home=\034\032$<200/>,
17536 # Thu Jul 7 03:55:16 1983
17538 # As an aside, be careful; it may sound like an anomaly on the
17539 # Osborne, but with the 80-column upgrade, it's too easy to
17540 # enter lines >80 columns!
17542 # I've already had several comments...
17543 # The Osborne-1 with the 80-col option is capable of being
17544 # 52, 80, or 104 characters wide; default to 80 for compatibility
17545 # with most systems.
17547 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17548 osborne-w|osborne1-w|osborne I in 104-column mode,
17550 cols#104, lines#24,
17551 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17552 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17553 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
17554 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
17555 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
17556 osborne|osborne1|osborne I in 80-column mode,
17557 OTbs, am, mir, msgr, ul, xhp,
17558 OTdB#4, cols#80, lines#24,
17559 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
17560 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17561 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
17562 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
17563 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
17565 # Osborne Executive definition from BRL
17566 # Similar to tvi920
17567 # Added by David Milligan and Tom Smith (SMU)
17568 osexec|Osborne executive,
17570 OTug#1, cols#80, lines#24, xmc#1,
17571 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17572 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17573 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
17574 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
17575 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
17576 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
17577 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
17580 #### Console types for obsolete UNIX clones
17582 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
17583 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
17584 # were commercial, Minix an educational tool sold in conjunction with a book.
17585 # Memory-segmentation limits and a strong tendency to look like V7 long after
17586 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
17587 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
17588 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
17589 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
17590 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
17591 # even as single processes under SunOS and the Macintosh OS.
17595 # http://www.minix3.org/manpages/man4/console.4.html
17596 minix|minix console (v3),
17597 use=ecma+color, use=minix-1.7,
17600 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
17601 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
17602 minix-1.7|minix console (v1.7),
17604 cols#80, it#8, lines#25,
17605 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17606 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17607 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17608 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17609 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
17610 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
17611 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17612 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
17613 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
17614 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
17615 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
17616 smso=\E[7m, smul=\E[4m,
17617 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
17618 minix-old|minix-1.5|minix console (v1.5),
17620 cols#80, it#8, lines#25,
17621 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17622 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17623 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17624 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17625 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17626 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17627 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17628 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
17629 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
17630 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17631 # The linewrap option can be specified by editing /usr/include/minix/config.h
17632 # before recompiling the minix 1.5 kernel.
17633 minix-old-am|minix console with linewrap,
17636 pc-minix|minix console on an Intel box,
17637 use=klone+acs, use=minix,
17639 # According to the Coherent 2.3 manual, the PC console is similar
17640 # to a z19. The differences seem to be (1) 25 lines, (2) no status
17641 # line, (3) standout is broken, (4) ins/del line is broken, (5)
17642 # has blinking and bold.
17643 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
17645 cols#80, it#8, lines#25,
17646 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17647 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
17648 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
17649 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
17650 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
17652 # According to the Venix 1.1 manual, the PC console is similar
17653 # to a DEC vt52. Differences seem to be (1) arrow keys send
17654 # different strings, (2) enhanced standout, (3) added insert/delete line.
17655 # Note in particular that it doesn't have automatic margins.
17656 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
17657 # not described here because this derives from an old termcap entry.
17658 pc-venix|venix|IBM PC console running Venix,
17659 cols#80, it#8, lines#25,
17660 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17661 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17662 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
17663 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
17665 #### Miscellaneous microcomputer consoles
17667 # If you know anything more about any of these, please tell me.
17670 # The MAI Basic Four computer was obsolete at the end of the 1980s.
17671 # It may be used as a terminal by putting it in "line" mode as seen on
17672 # one of the status lines.
17673 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
17674 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
17675 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
17676 # used \ED instead.
17677 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
17678 mai|basic4|MAI Basic Four in ansi mode,
17679 am, da, db, mir, msgr,
17680 cols#82, it#8, lines#25,
17681 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
17682 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
17683 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
17684 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
17685 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
17686 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
17687 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17688 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
17689 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
17690 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17691 smir=\E[4h, smso=\E[7m, smul=\E[4m,
17692 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
17693 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
17695 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
17696 # The Basis 108 was a Apple II clone, manufactured by the "Basis
17697 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
17698 # about 1,5 km from where I live, but doesn't build own computers any
17699 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
17700 # equipped with one or two 5.25" disk drives, had a monochrome and colour
17701 # video output for a TV set or a dedicated monitor and several slots for
17702 # Apple II cards. Basis 108 were quite popular at german schools before
17703 # the advent of the IBM PC. They run, for example, the UCSD Pascal
17704 # development system (which I used even in 1993 to program the steering
17705 # and data recording for our school's experimental solar panel :), Apple DOS
17707 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
17708 basis|BASIS108 computer with terminal translation table active,
17709 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
17710 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
17711 smso=\E(, use=adm3a,
17712 # luna's BMC terminal emulator
17713 luna|luna68k|LUNA68K Bitmap console,
17714 cols#88, lines#46, use=ansi-mini,
17715 megatek|pegasus workstation terminal emulator,
17718 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
17719 # interface (pre-Macintosh by several years) that went nowhere.
17720 xerox820|x820|Xerox 820,
17723 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17724 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
17727 #### Videotex and teletext
17730 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
17731 # \E[?3l 80 columns
17732 # \E[?4l scrolling on
17733 # \E[12h local echo off
17734 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
17735 # \E)0 G1 DEC set (line graphics)
17737 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
17738 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
17739 OTbs, eslok, hs, xenl,
17740 cols#80, it#8, lines#24, wsl#72, xmc#0,
17741 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
17742 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
17743 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17744 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17745 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17746 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17747 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
17748 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
17749 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
17750 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
17751 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
17752 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
17753 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
17754 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
17755 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
17756 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
17757 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
17758 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
17759 u6=\E[%i%d;%dR, u7=\E[6n,
17761 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
17763 minitel1|minitel 1,
17764 am, bw, eslok, hs, hz, msgr,
17765 colors#8, cols#40, lines#24, pairs#8,
17766 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
17767 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17768 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
17769 enacs=^Y, fsl=^J, home=^^, ind=^J,
17770 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
17771 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
17772 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
17773 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
17774 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
17775 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
17776 minitel1b|minitel 1-bistandard (in 40cols mode),
17778 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
17779 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17780 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
17781 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
17782 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17783 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
17784 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
17785 # <rmkx> posait des problemes (logout en sortant de vi).
17786 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
17788 colors@, cols#80, it#8, pairs@,
17789 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
17790 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
17791 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
17792 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
17793 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
17794 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
17795 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
17796 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
17797 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
17799 ######## OBSOLETE VDT TYPES
17801 # These terminals are *long* dead -- these entries are retained for
17802 # historical interest only.
17804 #### Amtek Business Machines
17807 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
17808 # but these caps were commented out in 8.3; also, removed overridden
17809 # ":do=^J:" -- esr)
17810 abm80|amtek business machines 80,
17813 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
17814 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
17815 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
17817 #### Bell Labs blit terminals
17819 # These were AT&T's official entries. The 5620 FAQ maintained by
17820 # David Breneman <daveb@dgtl.com> has this to say:
17822 # Actually, in the beginning was the Jerq, and the Jerq was white with a
17823 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
17824 # was good. But lo, upon the horizon loomed a mighty management-type person
17825 # (known now only by the initials VP) who said, the mighty Jerq must stay
17826 # alone, and could not go forth into the world. So Locanthi and Pike put the
17827 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
17828 # world. And the Jerq lived the rest of its days in research, but never
17829 # strayed from those paths.
17831 # In all seriousness, the Blit was originally known as the Jerq, but when
17832 # it started to be shown outside of the halls of the Bell Labs Research
17833 # organization, the management powers that be decided that the name could
17834 # not remain. So it was renamed to be Blit. This was in late 1981.
17836 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
17840 blit|jerq|blit running teletype rom,
17842 cols#87, it#8, lines#72,
17843 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17844 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17845 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
17846 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
17847 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
17848 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
17850 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
17851 cbblit|fixterm|blit running columbus code,
17853 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
17854 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
17855 smul=\EU", use=blit,
17857 oblit|ojerq|first version of blit rom,
17858 am, da, db, eo, mir, ul, xon,
17859 cols#88, it#8, lines#72,
17860 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17861 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
17862 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
17863 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
17866 #### Bolt, Beranek & Newman (bbn)
17868 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
17869 # The parent company, best known as the architects of the Internet, is
17872 # Jeff DelPapa <dp@world.std.com> writes:
17873 # The bitgraph was a large white box that contained a monochrome bitmap
17874 # display, and a 68000 to run it. You could download code and run it on
17875 # the cpu, it had 128kb (I think) of memory. I used one in the late
17876 # 70's, sure beat a vt100. It had one strange feature tho -- it used
17877 # the cpu to bitblt pixels to scroll, it took longer than the refresh
17878 # rate, and looked like a rubber sheet stretching, then snapping
17879 # upwards. It had everything the early mac had, except a floppy drive a
17880 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
17881 # Beranek and Neuman) sold at most a few hundred of them to the real
17882 # world. DOD may have bought more...
17885 # Entries for the BitGraph terminals. The problem
17886 # with scrolling in vi can only be fixed by getting BBN to put
17887 # smarter scroll logic in the terminal or changing vi or padding
17888 # scrolls with about 500 ms delay.
17890 # I always thought the problem was related to the terminal
17891 # counting newlines in its input buffer before scrolling and
17892 # then moving the screen that much. Then vi comes along and
17893 # paints lines in on the bottom line of the screen, so you get
17894 # this big white gap.
17896 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
17897 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17899 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
17900 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17902 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
17905 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
17906 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17907 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
17908 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
17909 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17910 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
17911 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
17912 sgr0=\E[m, smkx=\E=, smso=\E[7m,
17914 bg1.25rv|bbn bitgraph 1.25 (reverse video),
17915 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17917 bg1.25nv|bbn bitgraph 1.25 (normal video),
17918 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17920 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
17921 bg1.25|bbn bitgraph 1.25,
17923 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
17924 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
17925 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
17926 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
17927 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
17928 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
17929 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
17932 #### Bull (bq, dku, vip)
17934 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
17936 #============================================#
17937 # BULL QUESTAR 210 `SDP' terminals emulation #
17938 #============================================#
17940 # Description written by R.K.Saunders (Bull Transac)
17942 # Modifications written by F. Girard (Bull MTS)
17943 # 19-05-87 V02.00.01
17944 # 17-12-87 V02.00.02
17945 # 15-09-89 V02.00.05
17947 # Typical technical selections F1 (modes SDP/ROLL):
17948 # -------------------------------------------------------
17949 # | 01 02 03 04 05 06 07 08 09 10 |
17950 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
17952 # | 11 12 13 14 15 16 17 18 19 20 |
17953 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
17955 # | 21 22 23 24 25 26 27 28 29 30 |
17956 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
17958 # | 31 32 33 34 35 36 37 38 39 40 |
17959 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
17960 # -------------------------------------------------------
17961 # Typical firmware identification F5 "etat 6":
17962 # P287.02.04b (AZERTY)
17963 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
17964 # P298.03.03 (monochrome) or P374.03.02 (colour)
17966 # SM SDP mode (VIP command): ^[[?=h
17967 # RIS (erases screen): ^[c
17968 # DMI disable keyboard: ^[`
17969 # SM double rendition mode: ^[[?>h
17970 # RM solicited status mode: ^[[5l
17971 # RM character mode: ^[[>l
17972 # RM echoplex mode: ^[[12l
17973 # RM column tab mode: ^[[18l
17974 # RM forbid SS2 keyboard mode: ^[[?<l
17975 # SM scroll mode: ^[[=h
17976 # FCF enable XON/XOFF: ^[P1s^[\
17977 # MTL select end msg character: ^[[^Wp
17978 # EMI enable keyboard: ^[b
17979 # RIS retour etat initial: ^[c
17980 # enable FC keypad: ^[[?<h,
17981 # MPW map status line window: ^[PY99:98^[\
17982 # SCP select status line: ^[[0;98v
17983 # ED erase entire partition: ^[[2J
17984 # SCP select main partition: ^[[v
17985 # SM character insertion mode: ^[[4h
17986 # RM character replacement mode: ^[[4l
17987 # COO cursor on: ^[[r
17988 # COO cursor off: ^[[1r
17989 # SGR dim (turquoise) rev attr: ^[[2;7m
17990 # SGR Data normal attr: ^[[m
17991 # SO Line-graphic mode ON: ^N
17992 # SI Line-graphic mode OFF: ^O
17993 # MC start routing to printer: ^[[5i
17994 # MC stop routing to printer: ^M^[[4i
17997 # This entry covers the following terminals:
17998 # dku7102, tws2102, and tws models 2105 to 2112
17999 tws-generic|dku7102|Bull Questar tws terminals,
18000 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18001 cols#80, it#8, lines#24, wsl#80,
18002 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18003 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18004 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18005 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18006 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18007 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18008 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18009 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18010 il1=\E[L, ind=^J, invis=\E[0;8m,
18011 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18012 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18013 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18014 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18015 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18016 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18017 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18018 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18019 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18020 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18021 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18022 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18023 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18024 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18025 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18026 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18027 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18029 tws2103|xdku|BULL Questar tws2103,
18030 ht=^I, use=tws-generic,
18031 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18032 ht=^I, use=tws2102-sna,
18033 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18034 clear=\E[2J\E[H, cup@, dl@, dl1@,
18035 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18036 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18038 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18039 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18040 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18042 #=========================================================#
18043 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18044 #=========================================================#
18046 # Description written by J. Staerck (BULL SA)
18047 # Copyright (c) 1989 BULL SA
18048 #---------------------------------------------------------------------------
18049 # This entry is used for terminals with vt320 emulation mode
18050 # and following set-up :
18051 # 8 bit ISO Latin Character Set (ISO 8859-1),
18052 # 7 bit Control Characters,
18053 # 80 columns screen.
18054 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18055 # They are used in string capabilities with vt220-320 emulation mode.
18056 # In the following DEC definitions, two kinds of terminfo databases are
18058 # 1. the first with Command Sequence Introducer starting with escape
18059 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18060 # 2. the second with Command Sequence Introducer starting with escape
18061 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18062 # Soft Terminal Reset esc [ ! p
18063 # RIS (erases screen): esc c
18064 # DECKPNM numeric keypad mode: esc >
18065 # DECKPAM applic. keypad mode: esc =
18066 # DECSTBM Scrolling region: esc [ r
18067 # SCS select G0 = US: esc ( B
18068 # SCS select G1 = line-graphic: esc ) 0
18069 # Select 7-bit C1 controls: esc sp F
18070 # Select 8-bit C1 controls: esc sp G
18071 # Select cursor home: esc [ H
18072 # Select erase screen: esc [ J
18073 # SM KAM lock keyboard: esc [ 2 h
18074 # RM KAM unlock keyboard: esc [ 2 l
18075 # SM SRM local echo off: esc [ 1 2 h
18076 # RM SRM local echo on: esc [ 1 2 l
18077 # SM LNM New line : esc [ 2 0 h
18078 # RM LNM return = CR only: esc [ 2 0 l
18079 # SM DECCKM cursor keys mode: esc [ ? 1 h
18080 # RM DECCKM appli. keys mode: esc [ ? 1 l
18081 # SM DECANM ANSI mode on: esc [ ? 2 h
18082 # RM DECANM ANSI mode off: esc [ ? 2 l
18083 # SM DECCOLM 132-column screen: esc [ ? 3 h
18084 # RM DECCOLM 80-column screen: esc [ ? 3 l
18085 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18086 # RM DECSCLM Jump scroll: esc [ ? 4 l
18087 # SM DECSCNM screen light backgr. esc [ ? 5 h
18088 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18089 # SM DECOM move within margins: esc [ ? 6 h
18090 # RM DECOM move outside margins: esc [ ? 6 l
18091 # SM DECAWM auto right margin: esc [ ? 7 h
18092 # RM DECAWM auto right margin: esc [ ? 7 l
18093 # SM DECARM auto repeat: esc [ ? 8 h
18094 # RM DECARM auto repeat: esc [ ? 8 l
18095 # DECSASD Select active main: esc [ 0 $ }
18096 # DECSASD Select active status: esc [ 1 $ }
18097 # DECSSDT Select status none: esc [ 0 $ ~
18098 # DECSSDT Select status indic.: esc [ 1 $ ~
18099 # DECSSDT Select status host-wr: esc [ 2 $ ~
18100 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18101 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18102 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18103 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18104 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18105 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18106 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18107 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18108 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18109 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18110 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18111 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18112 # Char. and Line attributes: esc [ Ps ... Ps m
18113 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18114 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18117 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18118 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18119 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18120 cols#80, it#8, lines#24, vt#3, wsl#80,
18121 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18122 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18123 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18124 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18125 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18126 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18127 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18128 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18129 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18130 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18131 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18132 is1=\E[63;1"p\E[2h,
18133 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18134 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18135 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18136 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18137 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18138 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18139 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18140 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18141 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18142 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18143 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
18144 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
18145 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
18146 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18147 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18148 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18149 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18150 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
18151 bq300-rv|Bull vt320 reverse 80 columns,
18152 flash=\E[?5l$<50>\E[?5h,
18153 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18155 bq300-w|Bull vt320 132 columns,
18157 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18158 rs2=\E[?3h, use=bq300,
18159 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18161 flash=\E[?5l$<50>\E[?5h,
18162 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18163 rs2=\E[?3h, use=bq300,
18165 # This entry is used for terminals with vt320 emulation mode
18166 # and following set-up :
18167 # 8 bit ISO Latin Character Set (ISO 8859-1),
18168 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18169 # 80 columns screen.
18170 # Soft Terminal Reset csi ! p
18171 # RIS (erases screen): esc c
18172 # DECKPNM numeric keypad mode: esc >
18173 # DECKPAM applic. keypad mode: esc =
18174 # DECSTBM Scrolling region: esc [ r
18175 # SCS select G0 = US: esc ( B
18176 # SCS select G1 = line-graphic: esc ) 0
18177 # Select 7-bit C1 controls: esc sp F
18178 # Select 8-bit C1 controls: esc sp G
18179 # Select cursor home: csi H
18180 # Select erase screen: csi J
18181 # SM KAM lock keyboard: csi 2 h
18182 # RM KAM unlock keyboard: csi 2 l
18183 # SM SRM local echo off: csi 1 2 h
18184 # RM SRM local echo on: csi 1 2 l
18185 # SM LNM New line : csi 2 0 h
18186 # RM LNM return = CR only: csi 2 0 l
18187 # SM DECCKM cursor keys mode: csi ? 1 h
18188 # RM DECCKM appli. keys mode: csi ? 1 l
18189 # SM DECANM ANSI mode on: csi ? 2 h
18190 # RM DECANM ANSI mode off: csi ? 2 l
18191 # SM DECCOLM 132-column screen: csi ? 3 h
18192 # RM DECCOLM 80-column screen: csi ? 3 l
18193 # SM DECSCLM Smooth scroll: csi ? 4 h
18194 # RM DECSCLM Jump scroll: csi ? 4 l
18195 # SM DECSCNM screen light backgr. csi ? 5 h
18196 # RM DECSCNM screen dark backgr. csi ? 5 l
18197 # SM DECOM move within margins: csi ? 6 h
18198 # RM DECOM move outside margins: csi ? 6 l
18199 # SM DECAWM auto right margin: csi ? 7 h
18200 # RM DECAWM auto right margin: csi ? 7 l
18201 # SM DECARM auto repeat: csi ? 8 h
18202 # RM DECARM auto repeat: csi ? 8 l
18203 # DECSASD Select active main: csi 0 $ }
18204 # DECSASD Select active status: csi 1 $ }
18205 # DECSSDT Select status none: csi 0 $ ~
18206 # DECSSDT Select status indic.: csi 1 $ ~
18207 # DECSSDT Select status host-wr: csi 2 $ ~
18208 # SM DECTCEM Visible cursor: csi ? 2 5 h
18209 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18210 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18211 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18212 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18213 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18214 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18215 # Char. and Line attributes: csi Ps ... Ps m
18216 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18217 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18218 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18219 bq300-8|Bull vt320 full 8 bits 80 columns,
18220 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18221 cols#80, it#8, lines#24, vt#3, wsl#80,
18222 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18223 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18224 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18225 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
18226 cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
18227 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
18228 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18229 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18230 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18231 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
18232 is1=\E[63;2"p\E[2h,
18233 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18234 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18235 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18236 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18237 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18238 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18239 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18240 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18241 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18242 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18243 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18244 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18245 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
18246 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
18247 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
18248 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18249 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
18250 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18251 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18252 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18253 flash=\233?5l$<50>\233?5h,
18254 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18256 bq300-8w|Bull vt320 8-bit 132 columns,
18258 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18259 rs2=\233?3h, use=bq300-8,
18260 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18262 flash=\233?5l$<50>\233?5h,
18263 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18264 rs2=\233?3h, use=bq300-8,
18266 # This entry is used for terminals with vt320 emulation mode
18267 # a 102 keys keyboard (PC scancode !) and following set-up :
18268 # 8 bit ISO Latin Character Set (ISO 8859-1),
18269 # 7 bit Control Characters,
18270 # 80 columns screen.
18271 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18272 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18273 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18274 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18275 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18276 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18277 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18278 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18279 flash=\E[?5l$<50>\E[?5h,
18280 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18282 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18284 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18285 rs2=\E[?3h, use=bq300-pc,
18286 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18288 flash=\E[?5l$<50>\E[?5h,
18289 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18290 rs2=\E[?3h, use=bq300-pc,
18291 # 8 bit ISO Latin Character Set (ISO 8859-1),
18292 # 8 bit Control Characters,
18293 # 80 columns screen.
18294 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18295 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18296 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18297 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18298 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18299 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18300 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18301 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18302 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18303 flash=\E[?5l$<50>\E[?5h,
18304 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18306 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18308 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18309 rs2=\E[?3h, use=bq300-8-pc,
18310 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18312 flash=\E[?5l$<50>\E[?5h,
18313 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18314 rs2=\E[?3h, use=bq300-8-pc,
18316 #======================================================#
18317 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18318 #======================================================#
18320 # normal mode, 8 bits, 80 columns terminal.
18322 # RIS reset initial state: ^[c
18323 # BLE bell enable ^[h
18324 # BLD bell disable ^[g
18325 # CAMS char. attr. mode set ^[[D
18326 # CAMR char. attr. mode reset ^[[G
18328 # KBU keyboard unlock (set) ^[[W
18329 # KBL keyboard lock (reset) ^[[X
18330 # CM character mode (async.) ^[k
18331 # NEP non echoplex mode (by host) ^[l
18332 # EP echoplex mode (by host) ^[m
18333 # IM insert mode set ^[[I
18334 # IM insert mode reset ^[[J
18335 # RMS roll mode set ^[r
18336 # RMR roll mode reset ^[q
18337 # SM78 set mode vip7800 ^[[1q
18338 # SD scroll up (72 lines) ^[[0s
18339 # SD scroll down (72 lines) ^[[1s
18340 # RBM block mode reset ^[[E
18341 # SLS status line set ^[w
18342 # SLR status line reset ^[v
18343 # SLL status line lock ^[O
18344 # LGS Line-graphic mode set ^[G
18345 # LGR Line-graphic mode reset ^[F
18346 # TBC tab clear (at cursor pos.) ^[[g
18347 # TBI tab initialize ^[[N
18348 # TBS tab set (at cursor pos.) ^[p
18349 # PDS print data space ^[[0p
18350 # PHD print host data ^[[3p
18351 # PDT print data terminator ^[[<p
18352 # PRES print adapter reset ^[[2p
18353 # SSPR multi-part. reset ^[[<>u
18354 # SSP0 partition 0 set ^[[00u
18355 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18356 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18357 # SSP3 partition n format 3 ^[[PnPnu
18358 # ATR attribute (visual)
18361 # hide (blank) : ^[sH
18363 # inverse video : ^[sI
18368 # This covers the vip7800 and BQ3155-vip7800
18369 vip|Bull Questar 3155-7800,
18370 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18371 cols#80, it#8, lines#24, vt#3, wsl#80,
18372 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18373 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18374 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18375 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18376 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18377 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18378 is2=\E[00u\E[<>001001024080024080u\E[01u,
18379 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18380 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18381 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18382 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18383 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18384 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18385 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18386 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18387 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18388 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18389 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18390 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18391 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18392 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18393 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18394 smul=\Es_, tbc=\E[N, tsl=\Ew,
18395 # normal screen, 8 bits, 132 columns terminal.
18396 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18398 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18399 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18401 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18402 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18403 cols#132, lines#72, wsl#132,
18404 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18409 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18410 # that is smaller than the screen, and puts up a warning message
18411 # outside the window. Te erases the warning message, puts the
18412 # window back to be the whole screen, and puts the cursor at just
18413 # below the small window. I defined <cnorm> and <civis> to really turn
18414 # the cursor on and off, but I have taken this out since I don't
18415 # like the cursor being turned off when vi exits.
18416 cg7900|chromatics|chromatics 7900,
18419 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18420 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18421 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18422 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18423 rmso=\001C1\,\001c2\,,
18424 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18425 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18427 #### Computer Automation
18430 ca22851|computer automation 22851,
18433 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18434 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18435 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18440 # This entry has correct padding and the undocumented "ri" capability
18441 cyb83|xl83|cybernex xl-83,
18444 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18445 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18446 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18447 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18448 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18449 cyb110|mdl110|cybernex mdl-110,
18452 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18453 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18454 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18455 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18456 ht=\011$<43>, ich1=\016A\035$<3.5>,
18457 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18461 # Datapoint is gone. They used to be headquartered in Texas.
18462 # They created ARCnet, an Ethernet competitor that flourished for a while
18463 # in the early 1980s before 3COM got wise and cut its prices. The service
18464 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18467 dp3360|datapoint|datapoint 3360,
18470 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18471 ed=^_, el=^^, home=^], ind=^J,
18473 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18474 # The Datapoint 8242 Workstation was sold at least between 1985
18475 # and 1989. To make the terminal work with this entry, press
18476 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18477 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18478 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18479 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18480 # fact unusable because the strings sent by the terminal conflict
18481 # with other keys).
18482 # The terminal is capable of displaying "box draw" characters.
18483 # For each graphic character you must send 2 ESC's (\E\E) followed
18484 # by a control character as follows:
18485 # character meaning
18486 # ========= =======
18489 # ctrl-G bottom tee
18492 # ctrl-J top left corner
18493 # ctrl-K top right corner
18494 # ctrl-L bottom left corner
18495 # ctrl-M bottom right corner
18496 # ctrl-N horizontal line
18497 # ctrl-O vertical line
18498 # Unfortunately this cannot be fitted into the termcap/terminfo
18499 # description scheme.
18500 dp8242|datapoint 8242,
18503 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18504 cr=^M, cub1=^H, cud1=^J,
18505 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18506 home=^U, ht=^I, il1=\E^T, ind=^C,
18507 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18508 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18509 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18510 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18511 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18512 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18513 smso=\E^E, smul=\E^F,
18514 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18516 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18518 # These entries are DEC's official terminfos for its older terminals.
18519 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18520 # Engineering for more information. Updated terminfos and termcaps
18521 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18527 bel=^G, cr=^M, cub1=^H, cud1=^J,
18531 bel=^G, cr=^M, cub1=^H, cud1=^J,
18535 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18536 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
18540 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18541 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18542 el=\EK, ht=^I, ind=^J, ri=\EI,
18543 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
18544 vt61|vt-61|vt61.5|dec vt61,
18546 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
18547 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
18548 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
18549 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18552 # The gigi does standout with red!
18553 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
18554 gigi|vk100|dec gigi graphics terminal,
18557 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
18558 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18559 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18560 el=\E[K, ht=^I, ind=^J,
18561 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
18562 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
18563 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
18564 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18565 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
18568 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
18569 # a PC differentiated from the IBM clones. It was a total, ludicrous,
18570 # grossly-overpriced failure (among other things, DEC's OS didn't include
18571 # a format program, so you had to buy pre-formatted floppies from DEC at
18572 # a hefty premium!).
18573 pro350|decpro|dec pro console,
18575 cols#80, it#8, lines#24,
18576 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18577 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
18578 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18579 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18580 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
18581 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
18582 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
18587 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
18588 dw2|decwriter|dw|decwriter II,
18591 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
18592 # \E(B Use U.S. character set (otherwise # => british pound !)
18593 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
18594 # \E[w 10 char/in pitch
18595 # \E[1;132 full width horizontal margins
18596 # \E[2g clear all tab stops
18598 # \E[66t 66 lines/page (for \f)
18599 # \E[1;66r full vertical page can be printed
18600 # \E[4g clear vertical tab stops
18601 # \E> disable alternate keypad mode (so it transmits numbers!)
18602 # \E[%i%p1%du set tab stop at column %d (origin == 1)
18603 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
18606 # The dw3 does standout with wide characters.
18608 dw3|la120|decwriter III,
18611 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
18612 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
18613 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
18614 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
18618 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
18619 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
18621 # These aren't official
18622 ln03|dec ln03 laser printer,
18625 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
18626 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
18628 ln03-w|dec ln03 laser printer 132 cols,
18630 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
18631 kcud1=^J, nel=^M^J, use=ln03,
18633 #### Delta Data (dd)
18636 # Untested. The cup sequence is hairy enough that it probably needs work.
18637 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
18638 # There are BSD-derived termcap entries floating around for this puppy
18639 # that are *certainly* wrong.
18640 delta|dd5000|delta data 5000,
18643 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
18644 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
18645 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
18647 #### Digital Data Research (ddr)
18650 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
18651 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
18653 cols#80, it#8, lines#24, vt#3,
18654 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
18655 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
18656 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
18657 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
18658 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
18659 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18660 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
18661 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
18662 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
18663 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18664 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
18667 #### Evans & Sutherland
18670 # Jon Leech <leech@cs.unc.edu> tells us:
18671 # The ps300 was the Evans & Sutherland Picture System 300, a high
18672 # performance 3D vector graphics system with a bunch of specialized hardware.
18673 # Approximate date of release was 1982 (early 80s, anyway), and it had several
18674 # evolutions including (limited) color versions such as the PS330C. PS300s
18675 # were effectively obsolete by the late 80s, replaced by raster graphics
18676 # systems, although specialized applications like molecular modelling
18677 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
18678 # are out of production, though of course E&S is very much alive (in 1996).
18679 # (ps300: changed ":pt@:" to "it@" -- esr)
18681 ps300|Picture System 300,
18684 rmso@, rmul@, smso@, smul@, use=vt100,
18686 #### General Electric (ge)
18689 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
18692 bel=^G, cr=^M, cud1=^J, ind=^J,
18694 #### Heathkit/Zenith
18697 # Here is a description of the H19 DIP switches:
18700 # 0-3 = baud rate as follows:
18705 # 0 1 0 1 1200 baud
18706 # 1 0 0 0 2400 baud
18707 # 1 0 1 0 4800 baud
18708 # 1 1 0 0 9600 baud
18709 # 1 1 0 1 19.2K baud
18711 # 4 = parity (0 = no parity)
18712 # 5 = even parity (0 = odd parity)
18713 # 6 = stick parity (0 = normal parity)
18714 # 7 = full duplex (0 = half duplex)
18717 # 0 = block cursor (0 = underscore cursor)
18718 # 1 = no key click (0 = keyclick)
18719 # 2 = wrap at end of line (0 = no wrap)
18720 # 3 = auto LF on CR (0 = no LF on CR)
18721 # 4 = auto CR on LF (0 = no CR on LF)
18722 # 5 = ANSI mode (0 = VT52 mode)
18723 # 6 = keypad shifted (0 = keypad unshifted)
18724 # 7 = 50Hz refresh (1 = 60Hz refresh)
18726 # Factory Default settings are as follows:
18728 # S401 1 0 0 0 1 1 0 0
18729 # S402 0 0 0 0 0 0 0 0
18730 # (h19: I added <rmam>/<smam> based on the init string;
18731 # also added empty <acsc> to suppress a tic warning -- esr)
18732 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
18733 OTbs, am, mir, msgr,
18734 cols#80, it#8, lines#24,
18735 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
18736 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
18737 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
18738 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
18739 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
18740 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
18741 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
18742 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
18743 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
18744 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
18745 h19-bs|heathkit w/keypad shifted,
18746 rmkx=\Eu, smkx=\Et, use=h19-b,
18747 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
18748 rmkx=\Eu, smkx=\Et, use=h19-u,
18749 # (h19: merged in <ip> from BSDI hp19-e entry>;
18750 # also added empty <acsc> to suppress a tic warning --esr)
18751 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
18752 # Tim tells us that:
18753 # I have an old Zenith-19 terminal at home that still gets a lot of use.
18754 # This terminal suffers from the same famous insert-mode padding lossage
18755 # that has been acknowledged for the Z29 terminal. Emacs is nearly
18756 # unusable on this box, since even a half-scroll up or down the window
18757 # causes flaming terminal death.
18759 # On the Z19, the only way I have found around this problem is to remove
18760 # the :al: and :dl: entries entirely. No amount of extra padding will
18761 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
18762 # makes Emacs a little slower, but it remains in the land of the living.
18764 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
18765 OTbs, am, eslok, hs, mir, msgr,
18766 cols#80, it#8, lines#24,
18767 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
18768 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18769 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
18770 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
18771 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18772 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
18773 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
18774 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18775 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
18776 h19-u|heathkit with underscore cursor,
18777 cnorm@, cvvis@, use=h19-b,
18778 h19-g|h19g|heathkit w/block cursor,
18779 cnorm=\Ex4, cvvis@, use=h19-b,
18780 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
18782 dl1=\EM, il1=\EL, use=h19,
18784 # The major problem with the Z29 is that it requires more padding than the Z19.
18786 # The problem with declaring an H19 to be synonymous with a Z29 is that
18787 # it needs more padding. It especially loses if a program attempts
18788 # to put the Z29 into insert mode and insert text at 9600 baud. It
18789 # even loses worse if the program attempts to insert tabs at 9600
18790 # baud. Adding padding to text that is inserted loses because in
18791 # order to make the Z29 not die, one must add so much padding that
18792 # whenever the program tries to use insert mode, the effective
18793 # rate is about 110 baud.
18795 # What program would want to put the terminal into insert mode
18796 # and shove stuff at it at 9600 baud you ask?
18798 # Emacs. Emacs seems to want to do the mathematically optimal
18799 # thing in doing a redisplay rather than the practical thing.
18800 # When it is about to output a line on top of a line that is
18801 # already on the screen, instead of just killing to the end of
18802 # the line and outputting the new line, it compares the old line
18803 # and the new line and if there are any similarities, it
18804 # constructs the new line by deleting the text on the old line
18805 # on the terminal that is already there and then inserting new
18806 # text into the line to transform it into the new line that is
18807 # to be displayed. The Z29 does not react kindly to this.
18809 # But don't cry for too long.... There is a solution. You can make
18810 # a termcap entry for the Z29 that says the Z29 has no insert mode.
18811 # Then Emacs cannot use it. "Oh, no, but now inserting into a
18812 # line will be really slow", you say. Well there is a sort of a
18813 # solution to that too. There is an insert character option on
18814 # the Z29 that will insert one character. Unfortunately, it
18815 # involves putting the terminal into ansi mode, inserting the
18816 # character, and changing it back to H19 mode. All this takes 12
18817 # characters. Pretty expensive to insert one character, but it
18818 # works. Either Emacs doesn't try to use its inserting hack when
18819 # it's only given an insert character ability or the Z29 doesn't
18820 # require padding with this (the former is probably more likely,
18821 # but I haven't checked it out).
18822 # (z29: added empty <acsc> to suppress a tic warning, merged in
18823 # status line capabilities from BRL entry --esr)
18824 z29|zenith29|z29b|zenith z29b,
18825 OTbs, OTpt, am, eslok, hs, mir, msgr,
18826 OTkn#10, cols#80, lines#24,
18827 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
18828 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18829 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
18830 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
18831 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
18832 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
18833 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18834 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
18835 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
18836 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
18837 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
18838 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18839 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
18840 # the world is stable. <rs1> causes the terminal to be reset to the state
18841 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
18842 # cursor, bc -> block cursor.
18843 # From: Mike Meyers
18844 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
18845 # looks vt100-compatible -- esr)
18846 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
18847 OTbs, OTpt, am, eslok, hs, mir, msgr,
18848 OTkn#10, cols#80, it#8, lines#24,
18849 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
18850 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18851 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18852 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18853 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18854 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
18855 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
18856 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
18857 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
18858 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18859 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
18860 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
18861 rmso=\E[m, rmul=\E[m,
18862 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
18863 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
18864 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
18865 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
18866 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
18868 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
18869 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
18871 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
18872 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
18874 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
18875 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
18876 am, eslok, hs, mc5i, mir, msgr, xon,
18878 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18879 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
18880 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
18881 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18882 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18883 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18884 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18885 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
18886 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
18887 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
18888 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
18889 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
18890 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18891 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
18892 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
18893 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
18894 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
18895 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18896 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
18898 # From: Brad Brahms <Brahms@USC-ECLC>
18899 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
18900 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
18901 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
18902 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
18903 OTbs, OTpt, mir, msgr,
18904 OTkn#10, cols#80, it#8, lines#24,
18905 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
18906 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
18907 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
18908 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
18909 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
18910 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
18911 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
18912 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18913 smir=\E@, smso=\Ep,
18914 p19|h19-b with il1/dl1,
18915 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
18916 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
18917 # (ztx: removed duplicate :sr: -- esr)
18918 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
18919 OTbs, am, eslok, hs,
18920 cols#80, it#8, lines#24,
18921 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
18922 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18923 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
18924 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
18925 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
18926 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
18927 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
18928 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18930 #### IMS International (ims)
18932 # There was a company called IMS International located in Carson City,
18933 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
18934 # bus/Z80 hardware and a line of terminals called Ultimas.
18937 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
18938 ims950-b|bare ims950 no init string,
18940 # (ims950: removed obsolete ":ko@:" -- esr)
18941 ims950|ims televideo 950 emulation,
18943 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18944 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
18945 # (ims950-rv: removed obsolete ":ko@:" -- esr)
18946 ims950-rv|ims tvi950 rev video,
18948 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18949 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
18950 ims-ansi|ultima2|ultimaII|IMS Ultima II,
18952 cols#80, it#8, lines#24,
18953 clear=\E[H\E[2J, cub1=^H, cud1=\ED,
18954 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
18955 ht=^I, if=/usr/share/tabset/vt100,
18956 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
18957 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
18958 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
18961 #### Intertec Data Systems
18963 # I think this company is long dead as of 1995. They made an early CP/M
18964 # micro called the "Intertec Superbrain" that was moderately popular,
18965 # then sank out of sight.
18968 superbrain|intertec superbrain,
18971 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
18972 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
18973 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
18974 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
18975 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
18976 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
18977 # and the reverse is actually true. Try it. -- esr)
18978 intertube|intertec|Intertec InterTube,
18981 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
18982 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
18983 ind=^J, rmso=\E0@, smso=\E0P,
18984 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
18985 # are typing and a command comes in, the keystrokes you type get interspersed
18986 # with the command and it messes up
18987 intertube2|intertec data systems intertube 2,
18989 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
18990 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
18991 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
18993 #### Ithaca Intersystems
18995 # This company made S100-bus personal computers long ago in the pre-IBM-PC
18996 # past. They used to be reachable at:
18998 # Ithaca Intersystems
18999 # 1650 Hanshaw Road
19000 # Ithaca, New York 14850
19002 # However, the outfit went bankrupt years ago.
19005 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19006 # These entries were written (originally in termcap syntax) by Brian Yandell
19007 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19008 # University of Wisconsin.
19010 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19011 # removed <if=/usr/share/tabset/init.graphos> and
19012 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19013 graphos|graphos III,
19015 cols#80, it#8, lines#24,
19016 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19017 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19018 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19019 cuu=\E[%p1%dA, cuu1=\E[A,
19020 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19021 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19022 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19023 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19024 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19025 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19026 smir=\E[4h, smso=\E[7m,
19027 graphos-30|graphos III with 30 lines,
19029 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19033 # These people used to be reachable at:
19036 # 1393 Main Street,
19037 # Waltham, MA 02154
19038 # Vox: (617)-890-5796.
19040 # However, if you call that number today you'll get an insurance company.
19041 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19042 # 26 Feb 1997 that says:
19044 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19045 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19046 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19047 # panel-mount etc). I can be emailed at sonfour@aol.com
19049 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19050 # dated 1984. According to the manual, it featured Tek 4010/4014
19051 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19054 modgraph|mod24|modgraph terminal emulating vt100,
19057 cvvis=\E\^9;0s\E\^7;1s,
19058 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19059 rf@, ri=\EM\E[K$<5/>, use=vt100,
19060 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19061 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19063 cols#80, it#8, lines#24,
19064 clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
19065 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
19066 ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19067 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19070 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19071 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19072 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19073 # mark and using delete-to-killbuffer work correctly. However, we would
19074 # like normal mode of operation to be using a Modgraph with 48 line setting.
19075 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19076 # the setting mark and delete-to-killbuffer results in the deletion of only
19077 # the line the mark is set on.
19078 # We've discovered that the delete-to-killbuffer works correctly
19079 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19080 # the first line disappears but a ctrl-l shows that it did work
19082 modgraph48|mod|Modgraph w/48 lines,
19083 OTbs, OTpt, am, xenl,
19084 cols#80, it#8, lines#48, vt#3,
19085 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19086 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19087 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19088 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19089 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19090 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19091 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19092 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19093 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19094 smso=\E[7m, smul=\E[4m,
19096 #### Morrow Designs
19098 # This was George Morrow's company. They started in the late 1970s making
19099 # S100-bus machines. They used to be reachable at:
19102 # 600 McCormick St.
19103 # San Leandro, CA 94577
19105 # but they're long gone now (1995).
19108 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19109 # Jeff's specimen was dated June 1984.
19110 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19111 mt70|mt-70|Morrow MD-70; native Morrow mode,
19112 am, mir, msgr, xon,
19113 cols#80, it#8, lines#24,
19114 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19115 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19116 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19117 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19118 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19119 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19120 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19121 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19122 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19123 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19124 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19125 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19126 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19127 smul=\EG1, tbc=\E0, use=adm+sgr,
19132 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19134 ex155|Motorola Exorterm 155,
19136 OTkn#5, OTug#1, cols#80, lines#24,
19137 cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
19138 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
19139 home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19140 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19141 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19145 # This company is still around in 1995, manufacturing point-of-sale systems.
19147 omron|Omron 8025AG,
19150 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19151 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19152 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19156 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19157 # were competition for things like the Tektronics 4025.
19160 # Ramtek 6221 from BRL, probably by Doug Gwyn
19161 # The following SET-UP modes are assumed for normal operation:
19162 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19163 # NEWLINE_OFF 80_COLUMNS
19164 # Other SET-UP modes may be set for operator convenience or communication
19165 # requirements; I recommend
19166 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19167 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19168 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19169 # Note that the Control-E key is useless on this brain-damaged terminal. No
19170 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19171 rt6221|Ramtek 6221 80x24,
19172 OTbs, OTpt, msgr, xon,
19173 OTkn#4, cols#80, it#8, lines#24, vt#3,
19174 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19175 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19176 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19177 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19178 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19179 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19180 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19181 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19182 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19183 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19184 rmso=\E[m, rmul=\E[m,
19185 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19186 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19187 smul=\E[4m, tbc=\E[3g,
19188 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19189 rt6221-w|Ramtek 6221 160x48,
19190 cols#160, lines#48,
19191 ll=\E[48;1H, use=rt6221,
19196 # RCA VP3301 or VP3501
19197 rca|rca vp3301/vp3501,
19200 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19201 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19207 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19208 # The following SET-UP modes are assumed for normal operation:
19209 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19210 # ONLINE ANSI CURSOR_VISIBLE
19211 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19212 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19213 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19214 # For use with graphics software, all graphics modes should be set to factory
19215 # default. Other SET-UP modes may be set for operator convenience or
19216 # communication requirements. No delays are specified; use "stty ixon -ixany"
19217 # to enable DC3/DC1 flow control!
19218 # I commented out the scrolling capabilities since they are too slow.
19219 hirez100|Selanar HiREZ-100,
19220 OTbs, OTpt, mir, msgr, xon,
19221 OTkn#4, cols#80, it#8, lines#48, vt#3,
19222 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19223 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19224 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19225 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19226 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19227 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19228 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19229 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19230 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19231 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19232 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19233 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19234 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19235 smul=\E[4m, tbc=\E[3g,
19236 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19237 cols#132, use=hirez100,
19242 # From University of Wisconsin
19243 vsc|Signetics Vsc Video driver by RMC,
19245 cols#80, it#8, lines#26,
19246 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19247 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19248 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19249 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19253 # Alan Frisbie <frisbie@flying-disk.com> writes:
19255 # As you may recall, the Soroc logo consisted of their name,
19256 # with the letter "S" superimposed over an odd design. This
19257 # consisted of a circle with a slightly smaller 15 degree (approx.)
19258 # wedge with rounded corners inside it. The color was sort of
19259 # a metallic gold/yellow.
19261 # If I had been more of a beer drinker it might have been obvious
19262 # to me, but it took a clue from their service department to make
19263 # me exclaim, "Of course!" The circular object was the top of
19264 # a beer can (the old removable pop-top style) and "Soroc" was an
19265 # anagram for "Coors".
19267 # I can just imagine the founders of the company sitting around
19268 # one evening, tossing back a few and trying to decide what to
19269 # call their new company and what to use for a logo.
19272 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19273 soroc120|iq120|soroc|soroc iq120,
19274 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19275 kcuf1=^L, kcuu1=^K, use=adm3a,
19276 soroc140|iq140|soroc iq140,
19279 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19280 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19281 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19282 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19283 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19284 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19285 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19287 #### Southwest Technical Products
19289 # These guys made an early personal micro called the M6800.
19290 # The ct82 was probably its console terminal.
19293 # (swtp: removed obsolete ":bc=^D:" -- esr)
19294 swtp|ct82|southwest technical products ct82,
19297 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19298 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19299 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19300 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19301 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19305 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19307 # Synertek used to make ICs, various 6502-based single-board process
19308 # control and hobbyist computers, and assorted peripherals including a
19309 # series of small inexpensive terminals (I think they were one of the
19310 # first to have a "terminal-on-a-keyboard", where the terminal itself
19311 # was only slightly larger than the keyboard).
19313 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19314 # was a 40x24 terminal that could connect to a standard TV through a
19315 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19316 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19317 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19318 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19319 # ROM and 2 ROMs as character generators. They were incredibly simple,
19320 # and I've never had any problems with mine (witness the fact that mine
19321 # was made in 1981 and is still working great... I've blown the video
19322 # output transistor a couple of times, but it's a 2N2222 :-)
19324 # The KTM-3 (which is what is listed in the terminfo file) was their
19325 # attempt at putting a KTM-2 in a box (and some models came with a
19326 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19327 # control and escape sequences are very different. The KTM-3 was always
19328 # real broken, at least according to the folks I've talked to about it.
19330 # The padding in the entry is probably off--these terminals were very
19331 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19332 # anyone with any sanity replaced the ROMs with something that provided
19333 # a reasonable subset of VT100 functionality, since the usual ROMs were
19334 # obviously very primitive... oh, you could get an upgraded ROM from
19335 # Synertek for some incredible amount of money, but what hacker with an
19336 # EPROM burner would do that? :)
19338 # Sorry I don't have any contact info; I believe they were located in
19339 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19340 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19341 # business these days.
19344 # Tested, seems to work fine with vi.
19345 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19348 clear=^Z, cub1=^H, cuf1=^L,
19349 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19351 #### Tab Office Products
19353 # TAB Products Co. - Palo Alto, California
19354 # Electronic Office Products,
19355 # 1451 California Avenue 94304
19357 # I think they're out of business.
19360 # The tab 132 uses xon/xoff, so no padding needed.
19361 # <smkx>/<rmkx> have nothing to do with arrow keys.
19362 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19363 # Seems to be no way to get rid of status line.
19364 # The manual for this puppy was dated June 1981. It claims to be VT52-
19365 # compatible but looks more vt100-like.
19366 tab132|tab|tab132-15|tab 132/15,
19368 OTdN@, cols#80, lines#24, lm#96,
19369 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19370 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19371 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19372 tab132-w|tab132 in wide mode,
19374 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19375 tab132-rv|tab132 in reverse-video mode,
19376 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19377 tab132-w-rv|tab132 in reverse-video/wide mode,
19378 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19383 # Research Incorporated
19384 # 6425 Flying Cloud Drive
19385 # Eden Prairie, MN 55344
19386 # Vox: (612)-941-3300
19388 # The Teleray terminals were all discontinued in 1992-93. RI still services
19389 # and repairs these beasts, but no longer manufactures them. The Teleray
19390 # people believe that all the types listed below are very rare now (1995).
19391 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19392 # Model 100) that were ANSI-compatible.
19394 # Note two things called "teleray". Reorder should move the common one
19395 # to the front if you have either. A dumb teleray with the cursor stuck
19396 # on the bottom and no obvious model number is probably a 3700.
19399 t3700|dumb teleray 3700,
19402 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19403 t3800|teleray 3800 series,
19405 cols#80, it#8, lines#24,
19406 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19407 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19408 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19409 t1061|teleray|teleray 1061,
19410 OTbs, am, km, xhp, xt,
19411 cols#80, it#8, lines#24, xmc#1,
19412 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19413 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19414 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19415 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19416 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19417 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19418 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19420 t1061f|teleray 1061 with fast PROMs,
19421 dl1=\EM, il1=\EL, ip@, use=t1061,
19422 # "Teleray Arpa Special", officially designated as
19423 # "Teleray Arpa network model 10" with "Special feature 720".
19424 # This is the new (1981) fast microcode updating the older "arpa" proms
19425 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19426 # converts the keypad to programmable function keys, and has other goodies.
19427 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19428 # programs handle such lossage properly.
19429 # Note: this is NOT the old termcap's "t1061f with fast proms."
19430 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19431 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19432 t10|teleray 10 special,
19434 cols#80, it#8, lines#24, xmc#2,
19435 clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
19436 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19437 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19438 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19440 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19441 # back/forth words. Put the function keys (f1-f10) where they can be
19442 # found, and turn off the other magic keys along the top row, except
19443 # for line/local. Do the magic appropriate to make the page shifts work.
19444 # Also toggle ^S/^Q for those of us who use Emacs.
19446 am, da, db, mir, xhp, xt,
19448 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19449 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19450 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19451 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19452 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19453 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19454 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19455 smso=\E[7m, smul=\E[4m,
19457 #### Texas Instruments (ti)
19460 # The Silent 700 was so called because it was built around a quiet thermal
19461 # printer. It was portable, equipped with an acoustic coupler, and pretty
19462 # neat for its day.
19463 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19466 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19469 # Texas Instruments 916 VDT 7 bit control mode
19471 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19473 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19474 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19475 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19476 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19477 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19478 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19479 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19480 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19481 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19482 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19483 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19484 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19485 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19486 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19489 # Texas Instruments 916 VDT 8 bit control mode
19491 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19492 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19493 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19494 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19495 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19496 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19497 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19499 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19501 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19502 cols#132, use=ti916,
19504 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19506 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19507 cols#132, use=ti916-8,
19508 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19510 cols#80, it#8, lines#24,
19511 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19512 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19513 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19514 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19515 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19516 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19517 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19518 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19519 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19520 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19521 smul=\E[4m, tbc=\E[3g,
19522 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19524 cols#80, it#8, lines#24,
19525 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19526 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19527 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19528 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19529 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19530 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19531 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
19532 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
19533 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
19534 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
19535 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19536 smul=\E[4m, tbc=\E[3g,
19537 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
19538 cols#132, use=ti924,
19539 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
19540 cols#132, use=ti924-8,
19541 ti931|Texas Instruments 931 VDT,
19544 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
19545 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19546 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
19547 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
19548 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19549 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
19550 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
19551 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
19552 sgr0=\E4@, smso=\E4A, smul=\E4D,
19553 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
19554 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19555 # (ti926-8: I corrected this from the broken SCO entry -- esr)
19556 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
19557 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19558 ti_ansi|basic entry for ti928,
19559 am, bce, eo, xenl, xon,
19560 colors#8, cols#80, it#8, lines#25, pairs#64,
19561 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
19562 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19563 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19564 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19565 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19566 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
19567 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
19568 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
19569 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
19570 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
19571 smso=\E[7m, smul=\E[4m,
19573 # 928 VDT 7 bit control mode
19575 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
19576 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
19577 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
19578 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
19579 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
19580 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
19582 # 928 VDT 8 bit control mode
19584 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
19585 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
19586 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
19587 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
19588 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
19589 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
19590 kpp=\233T, kprt=\23335~, use=ti_ansi,
19595 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
19596 # had just <smso>=\EG6 which I think means standout was supposed to be
19597 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
19598 # <invis> might work-- esr)
19599 zen30|z30|zentec 30,
19602 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19603 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19604 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
19605 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
19606 smul@, use=adm+sgr,
19607 # (zen50: this had extension capabilities
19608 # :BS=^U:CL=^V:CR=^B:
19609 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
19610 # which were also in the original entry -- esr)
19611 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
19612 zen50|z50|zentec zephyr,
19614 cols#80, lines#24, xmc#1,
19615 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
19616 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
19617 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
19618 rmul@, smul@, use=adm+sgr,
19620 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
19621 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
19624 blink=\EM", clear=\EH\EJ, cnorm=\EP,
19625 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
19626 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19627 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
19628 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
19629 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
19630 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
19631 smso=\EM$, smul=\EM0,
19633 ######## OBSOLETE UNIX CONSOLES
19636 #### Apollo consoles
19638 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
19639 # labeled HP700s now.
19642 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
19643 apollo|apollo console,
19646 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
19647 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
19648 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
19649 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
19650 smso=\ES, smul=\EU, vpa=\EO+\s,
19652 # We don't know whether or not the apollo guys replicated DEC's firmware bug
19653 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
19654 # both these capabilities.
19655 apollo_15P|apollo 15 inch display,
19656 rmir@, smir@, use=vt132,
19657 apollo_19L|apollo 19 inch display,
19658 rmir@, smir@, use=vt132,
19659 apollo_color|apollo color display,
19660 rmir@, smir@, use=vt132,
19662 #### Convergent Technology
19664 # Burroughs bought Convergent shortly before it merged with Univac.
19665 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
19666 # from 1991 or earlier).
19669 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
19670 # (aws: removed unknown :dn=^K: -- esr)
19671 aws|Convergent Technologies AWS workstation under UTX and Xenix,
19673 OTug#0, cols#80, lines#28, xmc#0,
19674 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
19675 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
19676 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
19677 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
19678 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
19679 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
19681 awsc|Convergent Technologies AWS workstation under CTOS,
19683 OTug#0, cols#80, lines#24, xmc#0,
19684 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
19685 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
19686 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
19687 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
19693 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
19694 # The digital uVax II's had a graphic display called a qdss. It was
19695 # supposed to be a high performance graphic accelerator, but it was
19696 # late to market and barely appeared before faster dumb frame buffers
19697 # appeared. I have only used this display while running X11. However,
19698 # during bootup, it was in text mode, and probably had a terminal emulator
19699 # within it. And that is what your termcap entry is for. In graphics
19700 # mode the screen size is 1024x864 pixels.
19701 qdss|qdcons|qdss glass tty,
19703 cols#128, lines#57,
19704 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
19705 cup=\E=%p1%c%p2%c, cuu1=^K,
19707 #### Fortune Systems consoles
19709 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
19710 # in their day; I (esr) used one myself for a year or so around 1984.
19711 # They had no graphics, though, and couldn't compete against Suns and
19715 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
19716 # (This had extension capabilities
19717 # :rv=\EH:re=\EI:rg=0:GG=0:\
19718 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
19719 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
19720 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
19721 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
19722 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
19723 # to force both magic cookie glitches off. Once upon a time, I
19724 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
19725 # function keys; thus the "Al" value for HM was certainly an error. I renamed
19726 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
19727 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
19728 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
19729 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
19730 fos|fortune|Fortune system,
19733 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
19734 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
19735 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
19736 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
19737 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
19738 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
19739 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
19740 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
19741 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
19742 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
19743 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
19744 smso=^\H`, smul=^\HP,
19746 #### Masscomp consoles
19748 # Masscomp has gone out of business. Their product line was purchased by
19749 # comany in Georgia (US) called "XS International", parts and service may
19750 # still be available through them.
19753 # (masscomp: ":MT:" changed to ":km:"; -- esr)
19754 masscomp|masscomp workstation console,
19756 cols#80, it#8, lines#24,
19757 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
19758 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19759 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
19760 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
19761 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
19762 masscomp1|masscomp large screen version 1,
19763 cols#104, lines#36, use=masscomp,
19764 masscomp2|masscomp large screen version 2,
19765 cols#64, lines#21, use=masscomp,
19767 ######## OTHER OBSOLETE TYPES
19769 # These terminals are *long* dead -- these entries are retained for
19770 # historical interest only.
19773 #### Obsolete non-ANSI software emulations
19776 # CTRM terminal emulator
19777 # 1. underlining is not allowed with colors: first, is is simulated by
19778 # black on white, second, it disables background color manipulations.
19779 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
19780 # so we have to save their status in the static registers A, B and H
19781 # respectively, to be able to restore them when color changes
19782 # (because any color change turns off ALL attributes)
19783 # 3. <bold> and <rev> sequences alternate modes,
19784 # rather than simply entering them. Thus we have to check the
19785 # static register B and H to determine the status, before sending the
19787 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
19788 # and then reset colors
19789 # 5. implementation of the protect mode would badly penalize the performance.
19790 # we would have to use \E&bn sequence to turn off colors (as well as all
19791 # other attributes), and keep the status of protect mode in yet another
19792 # static variable. If someone really needs this mode, they would have to
19793 # create another terminfo entry.
19794 # 6. original color-pair is white on black.
19795 # store the information about colors into static registers
19796 # 7. set foreground color. it performs the following steps.
19797 # 1) turn off all attributes
19798 # 2) turn on the background and video attributes that have been turned
19799 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
19800 # 3) turn on foreground attributes
19801 # 4) store information about foreground into U,V,W static registers
19802 # 8. turn on background: similar to turn on foreground above
19803 ctrm|C terminal emulator,
19805 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
19806 pairs#63, pb#19200, vt#6,
19807 bel=^G, blink=\E&dA%{1}%PA,
19808 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
19809 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19810 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
19811 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
19812 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
19813 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
19814 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
19815 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
19816 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
19817 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
19818 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
19819 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
19820 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
19821 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
19822 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
19824 # gs6300 - can't use blue foreground, it clashes with underline;
19825 # it's simulated with cyan
19826 # Bug: The <op> capability probably resets attributes.
19827 # (gs6300: commented out <rmln> (no <smln>) --esr)
19828 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
19829 am, bce, msgr, xon,
19830 colors#8, cols#80, it#8, lines#24, pairs#63,
19831 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19832 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
19833 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19834 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19835 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19836 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19837 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
19838 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
19839 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
19840 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
19841 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
19842 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
19843 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
19844 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
19846 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
19847 # MS-Kermit with Heath-19 emulation mode enabled
19848 # (h19k: changed ":pt@:" to ":it@"
19849 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
19854 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
19855 # Software (formerly Peripherals Computers & Supplies, Inc) of
19856 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
19857 # also be reached at support@synergy.com.
19858 versaterm|versaterm vt100 emulator for the macintosh,
19860 cols#80, it#8, lines#24,
19861 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19862 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
19863 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
19864 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
19865 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
19866 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
19867 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
19868 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
19869 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
19870 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
19871 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
19872 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
19875 # From: Rick Thomas <ihnp4!btlunix!rbt>
19876 # (xtalk: I added <rmam>/<smam> based on the init string.
19877 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
19878 am, mir, msgr, xon,
19879 cols#80, it#8, lines#24, vt#3, xmc#1,
19880 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19881 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
19882 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19883 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19884 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
19885 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
19886 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
19887 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19888 rmkx=\E[?1l\E>, rmso=\E[m\s,
19889 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
19890 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
19891 tbc=\E[3g, use=vt100+fnkeys,
19893 # The official PC terminal emulator program of the AT&T Product Centers.
19894 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
19895 simterm|attpc running simterm,
19898 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19899 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
19900 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
19901 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
19903 #### Daisy wheel printers
19905 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
19906 # wheel terminals. These are now largely obsolete.
19909 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
19910 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
19913 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
19914 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
19915 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
19917 is2=\r \E9, use=diablo1620,
19918 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
19919 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
19920 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
19922 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
19924 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
19926 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
19927 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
19929 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
19930 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
19931 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
19932 # If no tab is set or the terminal's in a bad mood, it glitches the screen
19933 # around all of memory. Note that return puts a blank ("a return character")
19934 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
19935 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
19936 # curses won't work (some old BSD versions) because it doesn't clear this bit,
19937 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
19938 # I have been unable to get tabs set in all 96 lines - it always leaves at
19939 # least one line with no tabs in it, and once you tab through that line,
19940 # it completely weirds out.
19941 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
19944 cols#80, lines#24, lm#96,
19945 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
19946 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
19947 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
19948 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
19949 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
19953 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19954 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19955 gsi|mystery gsi terminal,
19958 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
19960 aj830|aj832|aj|anderson jacobson,
19962 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
19964 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
19965 aj510|Anderson-Jacobson model 510,
19968 clear=^L, cub1=^H, cuf1=\EX,
19969 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
19970 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
19971 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
19972 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
19973 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
19975 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
19976 # This is incomplete, but it's a start.
19977 nec5520|nec|spinwriter|nec 5520,
19980 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
19981 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
19983 qume5|qume|Qume Sprint 5,
19986 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19987 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19988 # I suspect the xerox 1720 is the same as the diablo 1620.
19989 xerox1720|x1720|x1750|xerox 1720,
19992 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
19995 #### Miscellaneous obsolete terminals, manufacturers unknown
19997 # If you have any information about these (like, a manufacturer's name,
19998 # and a date on the serial-number plate) please send it!
20000 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20003 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20004 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20007 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20008 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20009 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20010 cops10|cops|cops-10|cops 10,
20013 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20014 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20015 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20017 # (d132: removed duplicate :ic=\E5:,
20018 # merged in capabilities from a BRL entry -- esr)
20019 d132|datagraphix|datagraphix 132a,
20022 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20023 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20024 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20025 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20026 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20027 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20028 # mode (which is what this entry looks like) and several other lesser-known
20031 OTbs, am, da, db, msgr, xhp,
20032 cols#80, it#8, lines#24,
20033 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20034 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20035 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20036 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20037 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20038 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20039 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20040 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20041 digilog|digilog 333,
20044 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20046 # The DWK was a terminal manufactured in the Soviet Union c.1986
20047 dwk|dwk-vt|dwk terminal,
20049 cols#80, it#8, lines#24,
20050 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20051 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20052 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20053 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20054 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20055 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20056 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20057 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20058 sgr0=\EX, smacs=\EF, smso=\ET,
20059 env230|envision230|envision 230 graphics terminal,
20061 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
20062 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20064 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20065 # coupler attached, the whole rig fitting in a suitcase and more or less
20066 # portable. Hot stuff for c.1977 :-) -- esr
20067 ep48|ep4080|execuport 4080,
20070 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20071 ep40|ep4000|execuport 4000,
20072 cols#136, use=ep4080,
20073 # Adam Thompson <athompso@pangea.ca> tells us:
20074 # Informer series - these are all portable units, resembling older
20075 # automatic bread-baking machines. The terminal looks like a `clamshell'
20076 # design, but isn't. The structure is similar to the Direct terminals,
20077 # but only half the width. The entire unit is only about 10" wide.
20078 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20079 # keyboard. All the keys are crammed together, much like some laptop
20080 # PCs today, but perhaps less well organized...all these units have a
20081 # bewildering array of plugs on the back, including a built-in modem.
20082 # The 305 was a color version of the 304; the 306 and 307 were mono and
20083 # color terminals built for IBM bisync protocols.
20084 # From: Paul Leondis <unllab@amber.berkeley.edu>
20085 ifmr|Informer D304,
20088 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20089 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20090 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20092 # Entry largely based on wy60 and has the features of wy60ak.
20093 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20094 am, bw, hs, km, mir, msgr, ul, xon,
20095 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20096 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20097 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20098 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20099 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20100 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20101 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20103 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20104 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20105 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20106 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20107 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20108 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20109 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20110 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20111 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20112 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20113 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20114 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20115 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20116 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20117 rs3=\EwG\Ee($<150>,
20118 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20119 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20120 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20121 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20122 uc=\EG8\EG0, use=adm+sgr,
20123 teletec|Teletec Datascreen,
20126 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20128 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20129 # This description is for the LANPAR Technologies VISION 3220
20130 # terminal from 1984/85. The function key definitions k0-k5 represent the
20131 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20132 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20134 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20135 # I had a couple of scopes (3221) like this once where I used to work, around
20136 # the 1987 time frame if memory serves me correctly. These scopes were made
20137 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
20138 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
20139 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
20140 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
20141 # (3221) cost about $1500 each, and one was always broken -- had to be sent
20142 # back to the shop for repairs.
20143 # The only real advantage these scopes had over the VT-240's were:
20144 # 1) They were faster in the Regis display, or at least the ones I did
20145 # 2) They had a handy debugging feature where you could split-screen the
20146 # scope, the graphics would appear on the top, and the REGIS commands would
20147 # appear on the bottom. I don't remember the VT-240s being able to do that.
20148 # I would swear that LANPAR Technologies was in MA someplace, but since I
20149 # don't work at the same place anymore, and those terminals and manuals were
20150 # long since junked, I cannot be any more sure than that.
20152 # (v3220: removed obsolete ":kn#10:",
20153 # I added <rmam>/<smam> based on the init string -- esr)
20154 v3220|LANPAR Vision II model 3220/3221/3222,
20155 OTbs, am, mir, xenl,
20156 cols#80, it#8, lines#24,
20157 clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
20158 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20159 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
20160 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
20161 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
20162 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
20163 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
20164 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20165 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
20166 ######## ICH/ICH1 VERSUS RMIR/SMIR
20168 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
20169 # are present; the symptom is doubled characters in an update using insert.
20170 # These applications are technically correct; in both 4.3BSD termcap and
20171 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
20172 # unless the terminal needs both. To my knowledge, no terminal still in this
20173 # file requires both other than the very obsolete dm2500.
20175 # For ncurses-based applications this is not a problem, as ncurses uses
20176 # one or the other as appropriate but never mixes the two. Therefore we
20177 # have not corrected entries like `linux' and `xterm' that specify both.
20178 # If you see doubled characters from these, use the linux-nic and xterm-nic
20179 # entries that suppress ich/ich1. And upgrade to ncurses!
20182 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
20184 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
20185 # ECMA-48 standards are said to be almost identical, but are not the same
20186 # as X3.64 (though for practical purposes they are close supersets of it).
20188 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
20189 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
20190 # Coded Character Sets"), include your snail-mail address, and you should
20191 # receive the document in due course. Don't expect an email acknowledgement.
20193 # Related standards include "X3.4-1977: American National Standard Code for
20194 # Information Interchange" (the ASCII standard) and "X3.41.1974:
20195 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
20196 # American National Standard for Information Interchange." I believe (but
20197 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
20201 #### VT100/ANSI/ECMA-48
20203 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
20204 # and ECMA-48 Control Functions for Coded Character Sets.
20206 # Much of the content of this comment is adapted from a table prepared by
20207 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
20208 # discussion of some terminfo-related issues, and updates to capture ECMA-48
20209 # have been added. Control functions described in ECMA-48 only are tagged
20210 # with * after their names.
20212 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
20213 # sequences. In the main table, \E stands for an escape (\033) character,
20214 # SPC for space. Pn stands for a single numeric parameter to be inserted
20215 # in decimal ASCII. Ps stands for a list of such parameters separated by
20216 # semicolons. Parameter meanings for most parametrized sequences are
20217 # decribed in the notes.
20219 # Sequence Sequence Parameter or
20220 # Mnemonic Name Sequence Value Mode terminfo
20221 # -----------------------------------------------------------------------------
20222 # APC Applicatn Program Command \E _ - Delim -
20223 # BEL Bell * ^G - - bel
20224 # BPH Break Permitted Here * \E B - * -
20225 # BS Backpace * ^H - EF -
20226 # CAN Cancel * ^X - - - (A)
20227 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
20228 # CCH Cancel Previous Character \E T - - -
20229 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
20230 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
20231 # CMD Coding Method Delimiter * \E
20232 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
20233 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
20234 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
20235 # CSI Control Sequence Intro \E [ - Intro -
20236 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
20237 # CUB Cursor Backward \E [ Pn D 1 eF cub
20238 # CUD Cursor Down \E [ Pn B 1 eF cud
20239 # CUF Cursor Forward \E [ Pn C 1 eF cuf
20240 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
20241 # CUU Cursor Up \E [ Pn A 1 eF cuu
20242 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
20243 # DA Device Attributes \E [ Pn c 0 - -
20244 # DAQ Define Area Qualification \E [ Ps o 0 - -
20245 # DCH Delete Character \E [ Pn P 1 eF dch
20246 # DCS Device Control String \E P - Delim -
20247 # DL Delete Line \E [ Pn M 1 eF dl
20248 # DLE Data Link Escape * ^P - - -
20249 # DMI Disable Manual Input \E \ - Fs -
20250 # DSR Device Status Report \E [ Ps n 0 - - (I)
20251 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
20252 # EA Erase in Area \E [ Ps O 0 eF - (J)
20253 # ECH Erase Character \E [ Pn X 1 eF ech
20254 # ED Erase in Display \E [ Ps J 0 eF ed (J)
20255 # EF Erase in Field \E [ Ps N 0 eF -
20256 # EL Erase in Line \E [ Ps K 0 eF el (J)
20257 # EM End of Medium * ^Y - - -
20258 # EMI Enable Manual Input \E b Fs -
20259 # ENQ Enquire ^E - - -
20260 # EOT End Of Transmission ^D - * -
20261 # EPA End of Protected Area \E W - - - (K)
20262 # ESA End of Selected Area \E G - - -
20263 # ESC Escape ^[ - - -
20264 # ETB End Transmission Block ^W - - -
20265 # ETX End of Text ^C - - -
20266 # FF Form Feed ^L - - -
20267 # FNK Function Key * \E [ Pn SPC W - - -
20268 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
20269 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
20270 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
20271 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
20272 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
20273 # HPB Char Position Backward \E [ j 1 FE -
20274 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
20275 # HT Horizontal Tab * ^I - FE - (N)
20276 # HTJ Horz Tab w/Justification \E I - FE -
20277 # HTS Horizontal Tab Set \E H - FE hts
20278 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
20279 # ICH Insert Character \E [ Pn @ 1 eF ich
20280 # IDCS ID Device Control String \E [ SPC O - * -
20281 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
20282 # IL Insert Line \E [ Pn L 1 eF il
20283 # IND Index \E D - FE -
20284 # INT Interrupt \E a - Fs -
20285 # JFY Justify \E [ Ps SPC F 0 FE -
20286 # IS1 Info Separator #1 * ^_ - * -
20287 # IS2 Info Separator #1 * ^^ - * -
20288 # IS3 Info Separator #1 * ^] - * -
20289 # IS4 Info Separator #1 * ^\ - * -
20290 # LF Line Feed ^J - - -
20291 # LS1R Locking Shift Right 1 * \E ~ - - -
20292 # LS2 Locking Shift 2 * \E n - - -
20293 # LS2R Locking Shift Right 2 * \E } - - -
20294 # LS3 Locking Shift 3 * \E o - - -
20295 # LS3R Locking Shift Right 3 * \E | - - -
20296 # MC Media Copy \E [ Ps i 0 - - (S)
20297 # MW Message Waiting \E U - - -
20298 # NAK Negative Acknowledge * ^U - * -
20299 # NBH No Break Here * \E C - - -
20300 # NEL Next Line \E E - FE nel (D)
20301 # NP Next Page \E [ Pn U 1 eF -
20302 # NUL Null * ^@ - - -
20303 # OSC Operating System Command \E ] - Delim -
20304 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20305 # PFS Page Format Selection * \E Pn SPC J 0 - -
20306 # PLD Partial Line Down \E K - FE - (T)
20307 # PLU Partial Line Up \E L - FE - (U)
20308 # PM Privacy Message \E ^ - Delim -
20309 # PP Preceding Page \E [ Pn V 1 eF -
20310 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20311 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20312 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20313 # PTX Parallel Texts * \E [ \ - - -
20314 # PU1 Private Use 1 \E Q - - -
20315 # PU2 Private Use 2 \E R - - -
20316 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20317 # REP Repeat Char or Control \E [ Pn b 1 - rep
20318 # RI Reverse Index \E M - FE - (V)
20319 # RIS Reset to Initial State \E c - Fs -
20320 # RM Reset Mode * \E [ Ps l - - - (W)
20321 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20322 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20323 # SCI Single-Char Introducer \E Z - - -
20324 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20325 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20326 # SD Scroll Down \E [ Pn T 1 eF rin
20327 # SDS Start Directed String * \E [ Pn ] 1 - -
20328 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20329 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20330 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20331 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20332 # SI Shift In ^O - - - (P)
20333 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20334 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20335 # SLH Set Line Home * \E [ Pn SPC U - - -
20336 # SLL Set Line Limit * \E [ Pn SPC V - - -
20337 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20338 # SM Select Mode \E [ Ps h none - - (W)
20339 # SO Shift Out ^N - - - (Q)
20340 # SOH Start Of Heading * ^A - - -
20341 # SOS Start of String * \E X - - -
20342 # SPA Start of Protected Area \E V - - - (Z)
20343 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20344 # SPH Set Page Home * \E [ Ps SPC G - - -
20345 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20346 # SPL Set Page Limit * \E [ Ps SPC j - - -
20347 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20348 # SR Scroll Right \E [ Pn SPC A 1 eF -
20349 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20350 # SRS Start Reversed String * \E [ Ps [ 0 - -
20351 # SSA Start of Selected Area \E F - - -
20352 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20353 # SSW Set Space Width * \E [ Pn SPC [ none - -
20354 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20355 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20356 # ST String Terminator \E \ - Delim -
20357 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20358 # STS Set Transmit State \E S - - -
20359 # STX Start pf Text * ^B - - -
20360 # SU Scroll Up \E [ Pn S 1 eF indn
20361 # SUB Substitute * ^Z - - -
20362 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20363 # SYN Synchronous Idle * ^F - - -
20364 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20365 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20366 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20367 # TBC Tab Clear \E [ Ps g 0 FE tbc
20368 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20369 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20370 # TSS Thin Space Specification \E [ Pn SC E none FE -
20371 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20372 # VPB Line Position Backward * \E [ Pn k 1 FE -
20373 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20374 # VT Vertical Tabulation * ^K - FE -
20375 # VTS Vertical Tabulation Set \E J - FE -
20377 # ---------------------------------------------------------------------------
20381 # Some control characters are listed in the ECMA-48 standard without
20382 # being assigned functions relevant to terminal control there (they
20383 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20384 # here anyway for completeness.
20386 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20388 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20389 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20390 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20391 # preserved the CHA abbreviation.
20393 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20394 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20395 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20396 # CHT abbreviation.
20398 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20400 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20403 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20404 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20405 # 5 = clear all char tabs, 6 = clear all line tabs.
20407 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20408 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20409 # Position Absolute" but retains the HVP abbreviation.
20411 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20414 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20415 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20416 # DSR, 6 = request CPR response.
20418 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20419 # 1 = clear from beginning, 2 = clear.
20421 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20423 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20425 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20426 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20427 # Position Relative" but retains the HPR abbreviation.
20429 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20432 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20433 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20434 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20435 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20436 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20437 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20438 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20439 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20440 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20441 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20442 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20443 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20444 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20445 # 61-65 = variable highlights for ideograms.
20447 # (P) SI is also called LSO, Locking Shift Zero.
20449 # (Q) SI is also called LS1, Locking Shift One.
20451 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20452 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20453 # Absolute' but retains the VPA abbreviation.
20455 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20456 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20457 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20458 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20459 # 7 = start relay to secondary aux device.
20461 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20464 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20467 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20469 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20470 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20471 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20472 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20473 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20474 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20475 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20476 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20477 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20478 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20479 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20480 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20481 # from ECMA-48's 5th edition but are listed here for reference.
20483 # (X) Select Alternate Presentation Variants is used only for non-Latin
20486 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20488 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20491 # ---------------------------------------------------------------------------
20495 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20496 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20498 # Delim a Delimiter
20500 # x/y identifies a character by position in the ASCII table (column/row)
20502 # eF editor function (see explanation)
20504 # FE format effector (see explanation)
20506 # F is a Final character in
20507 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20508 # a control sequence (F from 4/0 to 7/14)
20510 # Gs is a graphic character appearing in strings (Gs ranges from
20511 # 2/0 to 7/14) in the ASCII table
20513 # Ce is a control represented as a single bit combination in the C1 set
20514 # of controls in an 8-bit character set
20516 # C0 the familiar set of 7-bit ASCII control characters
20518 # C1 roughly, the set of control chars available only in 8-bit systems.
20519 # This is too complicated to explain fully here, so read Jim Fleming's
20520 # article in the February 1983 BYTE, especially pages 214 through 224.
20522 # Fe is a Final character of a 2-character Escape sequence that has an
20523 # equivalent representation in an 8-bit environment as a Ce-type
20524 # (Fe ranges from 4/0 to 5/15)
20526 # Fs is a Final character of a 2-character Escape sequence that is
20527 # standardized internationally with identical representation in 7-bit
20528 # and 8-bit environments and is independent of the currently
20529 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
20531 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
20534 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
20537 # Pn is a numeric parameter in a control sequence, a string of zero or
20538 # more characters ranging from 3/0 to 3/9 in the ASCII table
20540 # Ps is a variable number of selective parameters in a control sequence
20541 # with each selective parameter separated from the other by the code
20542 # 3/11 (which usually represents a semicolon); Ps ranges from
20543 # 3/0 to 3/9 and includes 3/11
20545 # * Not relevant to terminal control, listed for completeness only.
20547 # Format Effectors versus Editor Functions
20549 # A format effector specifies how following output is to be displayed.
20550 # An editor function allows you to modify the display. Informally
20551 # format effectors may be destructive; format effectors should not be.
20553 # For instance, a format effector that moves the "active position" (the
20554 # cursor or equivalent) one space to the left would be useful when you want to
20555 # create an overstrike, a compound character made of two standard characters
20556 # overlaid. Control-H, the Backspace character, is actually supposed to be a
20557 # format effector, so you can do this. But many systems use it in a
20558 # nonstandard fashion, as an editor function, deleting the character to the
20559 # left of the cursor and moving the cursor left. When Control-H is assumed to
20560 # be an editor function, you cannot predict whether its use will create an
20561 # overstrike unless you also know whether the output device is in an "insert
20562 # mode" or an "overwrite mode". When Control-H is used as a format effector,
20563 # its effect can always be predicted. The familiar characters carriage
20564 # return, linefeed, formfeed, etc., are defined as format effectors.
20566 # NOTES ON THE DEC VT100 IMPLEMENTATION
20568 # Control sequences implemented in the VT100 are as follows:
20570 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
20571 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
20573 # plus several private DEC commands.
20575 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
20577 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
20578 # Erase from beginning of line to cursor Esc [ 1 K
20579 # Erase line containing cursor Esc [ 2 K
20580 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
20581 # Erase from beginning of screen to cursor Esc [ 1 J
20582 # Erase entire screen Esc [ 2 J
20584 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
20585 # Esc [ 2 J, but this is wrong; the default is 0.
20587 # The VT100 responds to receiving the DA (Device Attributes) control
20589 # Esc [ c (or Esc [ 0 c)
20591 # by transmitting the sequence
20595 # where Ps is a character that describes installed options.
20597 # The VT100's cursor location can be read with the DSR (Device Status
20602 # The VT100 reports by transmitting the CPR sequence
20606 # where Pl is the line number and Pc is the column number (in decimal).
20608 # The specification for the DEC VT100 is document EK-VT100-UG-003.
20612 # Here is a description of the color and attribute controls supported in the
20613 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
20614 # terminal emulators for Intel boxes obey these. They are a proper subset
20615 # of the ECMA-48 escapes.
20617 # 0 all attributes off
20618 # 1 foreground bright
20620 # 5 blink on/background bright (not reliable with brown)
20622 # 8 set blank (non-display)
20623 # 10 set primary font
20624 # 11 set first alternate font (on PCs, display ROM characters 1-31)
20625 # 12 set second alternate font (on PCs, display IBM high-half chars)
20627 # Color attribute sets
20628 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
20629 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
20630 # Bright black becomes gray. Bright brown becomes yellow,
20631 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
20633 # * If the 5 attribute is on and you set a background color (40-47) it is
20634 # supposed to enable bright background.
20636 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
20637 # when you try to set a "bright brown" (yellow) background with attribute
20638 # 5 (you get a blinking yellow foreground instead). A few displays
20639 # (including the System V console) support an attribute 6 that undoes this
20640 # braindamage (this is required by iBCS2).
20642 # * Some older versions of ANSI.SYS have a bug that causes thems to require
20643 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
20646 #### Intel Binary Compatibility Standard
20648 # For comparison, here are the capabilities implied by the Intel Binary
20649 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
20650 # These recommendations are optional. IBCS2 allows the leading escape to
20651 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
20652 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
20653 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
20654 # terminfo entry are followed with the corresponding capability in parens:
20656 # CSI <n>k disable (n=0) or enable (n=1) keyclick
20657 # CSI 2h lock keyboard
20658 # CSI 2i send screen as input
20659 # CSI 2l unlock keyboard
20660 # CSI 6m enable background color intensity
20661 # CSI <0-2>c reserved
20662 # CSI <0-59>m select graphic rendition
20663 # CSI <n>;<m>H (cup) cursor to line n and column m
20664 # CSI <n>;<m>f cursor to line n and column m
20665 # CSI <n>@ (ich) insert characters
20666 # CSI <n>A (cuu) cursor up n lines
20667 # CSI <n>B (cud) cursor down n lines
20668 # CSI <n>C (cuu) cursor right n characters
20669 # CSI <n>D (cud) cursor left n characters
20670 # CSI <n>E cursor down n lines and in first column
20671 # CSI <n>F cursor up n lines and in first column
20672 # CSI <n>G (hpa) position cursor at column n-1
20673 # CSI <n>J (ed) erase in display
20674 # CSI <n>K (el) erase in line
20675 # CSI <n>L (il) insert line(s)
20676 # CSI <n>P (dch) delete characters
20677 # CSI <n>S (indn) scroll up n lines
20678 # CSI <n>T (rin) scroll down n lines
20679 # CSI <n>X (ech) erase characters
20680 # CSI <n>Z (cbt) back up n tab stops
20681 # CSI <n>` cursor to column n on line
20682 # CSI <n>a (cuu) cursor right n characters
20683 # CSI <n>d (vpa) cursor to line n
20684 # CSI <n>e cursor down n lines and in first column
20685 # CSI <n>g (cbt) clear all tabs
20686 # CSI <n>z make virtual terminal n active
20687 # CSI ?7h (smam) turn automargin on
20688 # CSI ?7l (rmam) turn automargin off
20689 # CSI s save cursor position
20690 # CSI u restore cursor position to saved value
20691 # CSI =<c>A set overscan color
20692 # CSI =<c>F set normal foreground color
20693 # CSI =<c>G set normal background color
20694 # CSI =<c>H set reverse foreground color
20695 # CSI =<c>I set reverse foreground color
20696 # CSI =<c>J set graphic foreground color
20697 # CSI =<c>K set graphic foreground color
20698 # CSI =<n>g (dispc) display n from alternate graphics character set
20699 # CSI =<p>;<d>B set bell parameters
20700 # CSI =<s>;<e>C set cursor parameters
20701 # CSI =<x>D enable/disable intensity of background color
20702 # CSI =<x>E set/clear blink vs. bold background
20703 # CSI 7 (sc) (sc) save cursor position
20704 # CSI 8 (rc) (rc) restore cursor position to saved value
20705 # CSI H (hts) (hts) set tab stop
20706 # CSI Q<n><string> define function key string
20707 # (string must begin and end with delimiter char)
20708 # CSI c (clear) clear screen
20710 # The lack of any specification for attributes in SGR (among other things)
20711 # makes this a wretchedly weak standard. The table above is literally
20712 # everything iBSC2 has to say about terminal escape sequences; there is
20713 # no further discussion of their meaning or how to set the parameters
20714 # in these sequences at all.
20717 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
20719 # The historical termcap file entries were written primarily in 4.4BSD termcap.
20720 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
20721 # with the extension names chosen for compatibility with the termcap names
20722 # assigned in System V terminfo. There are some variant extension sets out
20723 # there. We try to describe them here.
20725 # XENIX extensions:
20727 # The XENIX extensions include a set of function-key capabilities as follows:
20729 # code XENIX variable name terminfo name name clashes?
20730 # ---- ------------------- ------------- -----------------------
20732 # CR key_char_right
20733 # CW key_change_window create_window
20735 # HM key_home khome
20737 # LD key_delete_line kdl1
20738 # LF key_linefeed label_off
20739 # NU key_next_unlocked_cell
20740 # PD key_page_down knp
20742 # PN start_print mc5
20744 # PS stop_print mc4
20745 # PU key_page_up kpp pulse
20746 # RC key_recalc remove_clock
20747 # RF key_toggle_ref req_for_input
20748 # RT key_return kent
20749 # UP key_up_arrow kcuu1 parm_up_cursor
20751 # WR key_word_right
20753 # The XENIX extensions also include the following character-set and highlight
20756 # XENIX terminfo function
20757 # ----- -------- ------------------------------
20758 # GS smacs start alternate character set
20759 # GE rmacs end alternate character set
20760 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
20761 # bo blink begin blink (not used in /etc/termcap)
20762 # be end blink (not used in /etc/termcap)
20763 # bb blink glitch (not used in /etc/termcap)
20764 # it dim begin dim (not used in /etc/termcap)
20765 # ie end dim (not used in /etc/termcap)
20766 # ig dim glitch (not used in /etc/termcap)
20768 # Finally, XENIX also used the following forms-drawing capabilities:
20770 # single double type ASCII approximation
20771 # ------ ------ ------------- -------------------
20772 # GV Gv vertical line |
20773 # GH Gv horizontal line - _
20774 # G1 G5 top right corner _ |
20775 # G2 G6 top left corner |
20776 # G3 G7 bottom left corner |_
20777 # G4 G8 bottom right corner _|
20778 # GD Gd down-tick character T
20779 # GL Gl left-tick character -|
20780 # GR Gr right-tick character |-
20781 # GC Gc middle intersection -|-
20782 # GU Gu up-tick character _|_
20784 # These were invented to take advantage of the IBM PC ROM character set. One
20785 # can compose an acsc string from the single-width characters as follows
20786 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
20787 # When translating a termcap file, ncurses tic will do this automatically.
20788 # The double forms characters don't fit the SVr4 terminfo model.
20792 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
20793 # nonstandard capabilities. Its signature is the KM capability, used to name
20794 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
20795 # set. Comments in the original, and a little cross-checking with other AT&T
20796 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
20797 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
20798 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
20799 # cursor invisible), and CV=:ve: (make cursor normal).
20803 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
20804 # have the System V capabilities up to SVr1 level. After that, it supports
20805 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
20806 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
20807 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
20808 # HP binary format incompatible with SVr4's.
20812 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
20813 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
20814 # capabilities following prtr_non with the following special capabilties:
20815 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
20816 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
20817 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
20818 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
20819 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
20820 # renamed (to kcbt and kslt). The places in the box[12] capabilities
20821 # correspond to acsc chars, here is the mapping:
20823 # box1[0] = ACS_ULCORNER
20824 # box1[1] = ACS_HLINE
20825 # box1[2] = ACS_URCORNER
20826 # box1[3] = ACS_VLINE
20827 # box1[4] = ACS_LRCORNER
20828 # box1[5] = ACS_LLCORNER
20829 # box1[6] = ACS_TTEE
20830 # box1[7] = ACS_RTEE
20831 # box1[8] = ACS_BTEE
20832 # box1[9] = ACS_LTEE
20833 # box1[10] = ACS_PLUS
20835 # The box2 characters are the double-line versions of these forms graphics.
20836 # The AIX binary terminfo format is incompatible with SVr4's.
20838 # Iris console extensions:
20840 # HS is half-intensity start; HE is half-intensity end
20841 # CT is color terminal type (for Curses & rogue)
20842 # CP is color change escape sequence
20843 # CZ are color names (for Curses & rogue)
20845 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
20849 # There is a set of extended termcaps associated with something
20850 # called the "Terminal Control" or TC package created by MainStream Systems,
20851 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
20852 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
20853 # that flags color terminals.
20855 ######## CHANGE HISTORY
20857 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
20858 # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
20861 # This file contains all the capability information present in John Kunze's
20862 # last version of the termcap master file, except as noted in the change
20863 # comments at end of file. Some information about very ancient obsolete
20864 # capabilities has been moved to comments. Some all-numeric names of older
20865 # terminals have been retired.
20867 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
20868 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
20869 # used by BSD curses.
20871 # The 9.1.0 version of this file was translated from my lightly-edited copy of
20872 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
20873 # the purpose. Unless the ncurses tic implementation and the Lisp code were
20874 # making perfectly synchronized mistakes which I then failed to catch by
20875 # eyeball, the translation was correct and perfectly information-preserving.
20877 # Major version number bumps correspond to major version changes in ncurses.
20879 # Here is a log of the changes since then:
20881 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
20882 # * First terminfo master translated from 8.3.
20883 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
20884 # * Replaced Wyse entries with updated entries supplied by vendor.
20886 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
20887 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
20888 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
20889 # * Better XENIX keycap translation. Describe TC termcaps.
20890 # * Contact and history info supplied by Qume.
20891 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
20892 # * Raided the Shuford FTP site for recent termcaps/terminfos.
20893 # * Added information on X3.64 and VT100 standard escape sequences.
20894 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
20895 # * Added a correct X11R6 xterm entry.
20896 # * Fixed terminfo translations of padding.
20897 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
20898 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
20899 # * Added u6/u7/u8/u9 capabilities.
20900 # * Added PCVT entry.
20901 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
20902 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
20903 # to use reverse-video standout so Emacs will look right.
20904 # * Added el1 capability to ansi.
20905 # * Added smacs/rmacs to ansi.sys.
20907 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
20908 # * New mt70 entry.
20909 # * Added COPYRIGHTS AND OTHER DELUSIONS.
20910 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
20911 # smartvid & smarterm, ampex 175 & 219 & 232,
20912 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
20913 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
20914 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
20915 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
20916 # * Replaced the Perkin-Elmer entries with vendor's official ones.
20917 # * Restored the old minimal-ansi entry, luna needs it.
20918 # * Fixed some incorrect ip and proportional-padding translations.
20919 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
20920 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
20921 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
20922 # to force a particular height.
20923 # * Added beehive4 and reorganized other Harris entries.
20924 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
20925 # * Merged in DEC's official entries for its terminals. The only old
20926 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
20927 # * Replaced the translated BBN Bitgraph entries with purpose-built
20928 # ones from AT&T's SVr3.
20929 # * Replaced the AT&T entries with AT&T's official terminfos.
20930 # * Added teleray 16, vc415, cops10.
20931 # * Merged in many individual capabilities from SCO terminfo files.
20932 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
20934 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
20935 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
20936 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
20937 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
20938 # simterm, citoh and variants.
20939 # * Replaced sol entry with sol1 and sol2.
20940 # * Replaced Qume QVT and Freedom-series entries with purpose-built
20941 # terminfo entries.
20942 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
20943 # and dg200 entries using caps from from SCO.
20944 # * Added the usual set of function-key mappings to ANSI entry.
20945 # * Corrected xterm's function-key capabilities.
20946 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
20947 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
20948 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
20949 # * Fix in xterm entry, get the arrow keys right.
20950 # * Change some \0 escapes to \200.
20951 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
20952 # * Added apple (Videx card), adm1a, oadm31.
20953 # * Fixed malformed ampex csr.
20954 # * Fixed act4, cyb110; they had old-style prefix padding left in.
20955 # * Changed mandatory to advisory padding in many entries.
20956 # * Replaced HP entries up to hpsub with purpose-built ones.
20957 # * Blank rmir/smir/rmdc/smdc capabilities removed.
20958 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
20959 # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
20960 # * Replaced the Ann Arbor entries with SCO's, the init strings are
20961 # more efficient (but the entries otherwise identical).
20962 # * Added dg211 from Shuford archive.
20963 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
20964 # adm42-nl, pc52, gs6300, xerox820, uts30.
20965 # * Pull SCO's padding into vi200 entry.
20966 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
20967 # entries merged in from SCO's descriptions.
20968 # * Fixed old-style prefix padding on zen50, h1500.
20969 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
20970 # entry from SCO's description.
20971 # * Reorganized the special entries.
20972 # * Added lm#0 to cbunix and virtual entries.
20974 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
20975 # * Restored cdc456tst.
20976 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
20977 # * Added megatek, beacon, microkit.
20978 # * Freeze for ncurses-1.9 release.
20979 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
20980 # * Added historical data for TAB.
20981 # * Comment fixes from David MacKenzie.
20982 # * Added the new BSDI pc3 entry.
20983 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
20984 # * A change in the tic -C logic now ensures that all entries in
20985 # the termcap translation will fit in < 1024 bytes.
20986 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
20987 # from GNU termcap file. This merges in all their local information.
20988 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
20989 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
20990 # * Added warnings about entries with long translations (restoring
20991 # all the GNU termcaps pushes a few over the edge).
20992 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
20993 # * Yet another tic change, and a couple of entry tweaks, to reduce the
20994 # number of long (> 1024) termcap translations back to 0.
20996 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
20997 # * Added kf13-kf20 to Linux entry.
20998 # * Regularize Prime terminal names.
20999 # * Historical data on Synertek.
21000 # * Freeze for ncurses-1.9.1.
21001 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21002 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21003 # * Eliminate whitespace in short name fields, this tanks some scripts.
21004 # * Name field changes to shorten some long entries.
21005 # * Termcap translation now automatically generates empty rmir/smir
21006 # when ich1/ich is present (copes with an ancient vi bug).
21007 # * Added `screen' entries from FSF's screen-3.6.2.
21008 # * Added linux-nic and xterm-nic entries.
21009 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21010 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21011 # eliminating some special-case code in ncurses.
21013 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21014 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21015 # that captures everything unique from it.
21016 # * Added reorder script generator.
21017 # * Freeze for ncurses 1.9.2 release.
21018 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21019 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21020 # * Added Olaf Siebert's corrections for adm12.
21021 # * ansi-pc-color now includes the colors and pairs caps, so that
21022 # entries which use it will inherit them automatically.
21023 # * The linux entry can now recognize the center (keypad 5) key.
21024 # * Removed some junk that found its way into Linux acsc.
21026 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21027 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21028 # * xterm doesn't try to use application keypad mode any more.
21029 # * Freeze for ncurses-1.9.3 release.
21030 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21031 # * Added corrected sun entry from vendor.
21032 # * Added csr capability to linux entry.
21033 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21034 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21035 # * Some commented-out caps in long entries come back in, my code
21036 # for computing string-table lengths had a bug in it.
21037 # * pcansi series modified to fit comm-program reality better.
21038 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
21039 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
21040 # * Correct some bad aliases in the pcansi series
21041 # * Added entry for QNX console.
21042 # * Clean up duplicate long names for use with 4.4 library.
21043 # * Change vt100 standout to be normal reverse vide, not bright reverse;
21044 # this makes the Emacs status line look better.
21045 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
21046 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
21047 # * Minor surgery, mostly on name strings, to shorten termcap version.
21049 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
21050 # * Added dec-vt100 for use with the EWAN emulator.
21051 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21052 # * Freeze for 1.9.5 alpha release.
21053 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
21054 # * Changed xterm lines to 24, the X11R6 default.
21055 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
21056 # * Added 7 newly discovered, undocumented acsc characters to linux
21057 # entry (the pryz{|} characters).
21058 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
21059 # * Correct two typos in the xterm entries introduced in 9.9.1.
21060 # * I finally figured out how to translate ko capabilities. Done.
21061 # * Added tvi921 entries from Tim Theisen.
21062 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
21063 # * Removed mystery tec entry, it was neither interesting nor useful.
21064 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
21065 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
21066 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
21067 # by making them relative to use capabilities
21068 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
21069 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
21070 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
21072 # * Translate all home=\E[;H capabilities to home=\E[H, they're
21074 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
21075 # vt100 and ANSI-like terminals.
21076 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
21077 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
21078 # does this now, too.
21079 # * fviewpoint is gone, it duplicated screwpoint.
21080 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
21081 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
21082 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
21083 # The UW vi50 replaces the old one, which becomes vi50adm,
21084 # * No more embedded commas in name fields.
21086 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
21087 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
21088 # * Introduced klone+* entries for describing Intel-console behavior.
21089 # * Linux kbs is default-mapped to delete for some brain-dead reason.
21090 # * -nsl -> -ns. The -pp syntax is obsolete.
21091 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
21092 # * Make xterm entry do application-keypad mode again. I got complaints
21093 # that it was messing up someone's 3270 emulator.
21094 # * Added some longname fields in order to avoid warning messages from
21095 # older tic implementations.
21096 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
21097 # it! (This gives us pi, greater than, less than, and a few more.)
21098 # * Freeze for ncurses-1.9.6 release.
21099 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
21100 # * Add xon to a number of console entries, they're memory-mapped and
21101 # don't need padding.
21102 # * Correct the use dependencies in the ansi series.
21103 # * Hand-translate more XENIX capabilities.
21104 # * Added hpterm entry for HP's X terminal emulator.
21105 # * Added aixterm entries.
21106 # * Shortened four names so everything fits in 14 chars.
21108 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
21109 # * Added ibcs2 entry and info on iBCS2 standard.
21110 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
21111 # * We can handle the HP meml/memu capability now.
21112 # * Added smacs to klone entries, just as documentation.
21113 # * Carrected ansi.sys and cit-500 entries.
21114 # * Added z39, vt320-k311, v220c, and avatar entries.
21115 # * Make pcansi use the ansi.sys invis capability.
21116 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
21117 # tvi925, tvi950, dt80, ncr7900i, h19.
21118 # * X3.64 has been withdrawn, change some references.
21119 # * Removed function keys from ansi-m entry.
21120 # * Corrected ansi.sys entry.
21121 # * Freeze for ncurses-1.9.7 release.
21122 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
21123 # * Added rmam/smam capabilities to many entries based on init strings.
21124 # * Added correct hpa/vpa to linux.
21125 # * Reduced several entries relative to vt52.
21126 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
21127 # * Exiled some utterly unidentifiable custom and homebrew types to the
21128 # UFO file; also, obsolete small-screen hardware; also, entries which
21129 # look flat-out incorrect, garbled, or redundant. These include the
21130 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
21131 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
21132 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
21133 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
21134 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
21135 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
21136 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
21137 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
21138 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
21139 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
21140 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
21141 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
21142 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
21143 # * Corrected pcvt25h as suggested by Brian C. Grayson
21144 # <bgrayson@pine.ece.utexas.edu>.
21145 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
21146 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
21147 # * Added kent=\EOM to xterm entry.
21149 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
21150 # * Corrected gigi entry.
21151 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
21152 # bad hpa/vpa capabilities.
21153 # * Corrected flash strings to have a uniform delay of .2 sec. No
21154 # more speed-dependent NUL-padding!
21155 # * terminfo capabilities in comments bracketed with <>.
21156 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
21157 # * Replaced pcvt with the 3.31 pcvt entries.
21158 # * Freeze for 1.9.7a.
21159 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
21160 # * Added emu entry from the X11R6 contrib tape sources.
21162 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
21163 # * Improved iris-ansi and sun entries.
21164 # * More flash string improvements.
21165 # * Corrected wy160 & wy160 as suggested by Robert Dunn
21166 # * Added dim to at386.
21167 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
21168 # he's ready to start using the termcap generated from this one.
21169 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
21170 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
21171 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
21172 # att610, att620, att630,
21173 # * Changed hazeltine name prefix from h to hz.
21174 # * Sent t500 to the UFI file.
21175 # * I think we've sucked all the juice out of BSDI's termcap file now.
21176 # * Freeze for ncurses 1.9.8 release
21177 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
21178 # * Unfreeze, linux kbs needed to be fixed.
21179 # * Tim Theisen pinned down a bug in the DMD firmware.
21180 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
21181 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
21182 # (The broken ones had been shadowed by sgr.)
21183 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
21184 # * Added documentation on ECMA-48 standard.
21185 # * New Amiga entry.
21186 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
21187 # * More ECMA-48 stuff
21188 # * Corrected typo in minix entry, added pc-minix.
21189 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
21190 # * Added rxvt entry.
21191 # * Added 1.3.x color-change capabilities to linux entry.
21192 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
21193 # * Corrected rxvt entry khome/kend.
21194 # * Corrected linux color change capabilities.
21195 # * NeXT entries from Dave Wetzel.
21196 # * Cleaned up if and rf file names (all in /usr/share now).
21197 # * Changed linux op capability to avoid screwing up a background color
21198 # pair set by setterm.
21199 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
21200 # * Added xterm-sun.
21201 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
21204 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
21205 # * Another sweep through the Shuford archive looking for new info.
21206 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
21207 # * Added st52 from Per Persson.
21208 # * Added eterm from the GNU Emacs 19.30 distribution.
21209 # * Freeze for 1.9.9.
21210 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
21211 # * FreeBSD console entries from Andrew Chernov.
21212 # * Removed duplicate Atari st52 name.
21213 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
21214 # * xterm doesn't actually have ACS_BLOCK.
21215 # * Change klone+color setf/setb to simpler forms that can be
21216 # translated into termcap.
21218 # * Removed mechanically-generated junk capabilities from cons* entries.
21219 # * Added color support to bsdos.
21220 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
21221 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
21222 # * Created ecma+color, linux can use it. Also added ech to linux.
21223 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
21224 # * Add descriptions to FreeBSD console entries. Also shorten
21225 # some aliases to <= 14 chars for portability.
21226 # * Added x68k console
21227 # * Added OTbs to several VT-series entries.
21228 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
21229 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21230 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
21231 # * kterm correction due to Kenji Rikitake.
21232 # * ACS correction in vt320-kll due to Phillippe De Muyter.
21233 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
21234 # * Sun console entry correction from J.T. Conklin.
21235 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21236 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
21237 # * Added smul to linux entry (we never noticed it was missing
21238 # because of sgr!).
21239 # * Added rmln to hp+labels (deduced from other HP entries).
21240 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
21241 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
21242 # * Corrected vt220 acsc.
21243 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21244 # this corresponds to reality and helps prevent some tic warnings.
21245 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
21246 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
21247 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
21248 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
21249 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
21250 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
21251 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
21252 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
21253 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
21254 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
21255 # ifmr, v3220, wy100q, tandem653, ibmaed.
21256 # * Added DWK terminal description.
21257 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
21258 # * Many entries now have highlights inherited from adm+sgr.
21259 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
21260 # * xtitle and xtitle-twm enable access to the X status line.
21261 # * Added linux-1.3.6 color palette caps in conventional format.
21262 # * Added adm1178 terminal.
21263 # * Move fos and apollo terminals to obsolete category.
21264 # * Aha! The BRL terminals file told us what the Iris extensions mean.
21265 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
21266 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
21268 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
21269 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
21270 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
21271 # * Corrected, from BRL termcap file: vi50.
21272 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
21273 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
21274 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
21275 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
21276 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
21277 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
21278 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
21279 # * Paired-attribute fixes to various terminals.
21280 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
21281 # * xterm entry corrections from Thomas Dickey.
21282 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
21283 # * Added t916 entry, translated from a termcap in SCO's support area.
21284 # * New qnx entry from Michael Hunter.
21285 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
21286 # * Added hpex2 from Ville Sulko.
21287 # * Fixed a bug that ran the qnx and pcvtXX together.
21288 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
21289 # * Added dtterm entry from Solaris CDE.
21290 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
21291 # * corrected pairs#8 typo in dtterm entry.
21293 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21294 # * updated xterm entry to cover 3.1.2E's new features.
21295 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21296 # * Added new minix entry
21297 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21298 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21299 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21300 # * Added Prism entries and kt7ix.
21301 # * Caution notes about EWAN and tabset files.
21302 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21303 # * Added acsc/rmacs/smacs to vt52.
21304 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21305 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21306 # added technical corrections to avoid warning messages.
21307 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21308 # * Added rmso=\E[27m in Linux entry.
21309 # * Added koi8-r support for Linux console.
21310 # * Replace xterm entries with canonical ones from XFree86 3.2.
21311 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21312 # * Added color_xterm from Jacob Mandelson
21313 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21314 # * Back off the xterm entry to use r6 as a base.
21315 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21316 # * Added dec-vt220 at Adrian Garside's request.
21318 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21320 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21321 # * Minor corrections to xterm entries.
21322 # * Replaced EWAN telnet entry.
21323 # * Dropped the reorder script generator. It was a fossil.
21324 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21325 # * Replaced minitel-2 entry.
21326 # * Added MGR, ansi-nt.
21327 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21328 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21329 # the 4.4BSD Lite2 file.
21331 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21332 # * Use setaf/setab consistently with SVr4.
21333 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21334 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21335 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21336 # * add xterm-16color, for XFree86 3.3
21337 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21338 # * correct typo in emu
21339 # * correct typo in vt102-w (Robert Wuest)
21340 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21341 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21342 # * remove ech capability from rxvt (it does the wrong thing)
21343 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21344 # * remove spurious newlines from several entries (hp+color, wy50,
21345 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21347 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21348 # * correct rmso capability of wy50-mc
21349 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21350 # * add cbt to xterm-xf86-v32
21351 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21352 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21353 # other capabilities not in xterm-r6.
21354 # * remove alternate character set from kterm entry.
21355 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21356 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21357 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21358 # * add xterm-8bit entry.
21359 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21360 # * repair several places where early version of tic replaced \, with \\\,
21361 # * make acsc entries canonical form (sorted, uniq).
21362 # * modify acsc entries for linux, linux-koi8
21363 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21364 # * add color, mouse support to kterm.
21365 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21366 # * correct wy120 smxon/tbc capabilities which were stuck together.
21367 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21368 # * add entry for xterm-xf86-v39t
21369 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21370 # * add u8,u9 to sun-il description
21371 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21372 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21374 # * add hds200 description (Walter Skorski)
21375 # * add EMX 0.9b descriptions
21376 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21377 # * rename xhpterm back to hpterm.
21378 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21379 # * change initc in linux-c-nc to use 0..1000 range.
21380 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21381 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21382 # * add sgr0 for rxvt.
21383 # * remove bogus smacs/rmacs from EMX descriptions.
21384 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
21385 # * revised entry for att7300
21386 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
21387 # * use \0 rather than \200.
21388 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21389 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21390 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21391 # * rename xterm-xf86-v39t to xterm-xf86-v40
21392 # * remove bold/underline from sun console entries since they're not
21394 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21395 # * add beterm entry (Fred Fish)
21396 # * add irix-color/xwsh entry.
21397 # * turn ncv off for linux.
21398 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21399 # * set ncv for FreeBSD console (treat colors with reverse specially).
21400 # * remove sgr string from qnx based on report by Xiaodan Tang
21401 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21402 # * remove spurious commas from descriptions
21403 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21404 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21405 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21406 # apparently based on cp-866).
21408 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21410 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21411 # * Replaced minitel-2 entry.
21412 # * Added MGR, ansi-nt.
21413 # * Minor corrections to xterm entries.
21414 # * Replaced EWAN telnet entry.
21415 # * Dropped the reorder script generator. It was a fossil.
21416 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21417 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21418 # the 4.4BSD Lite2 file.
21419 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21420 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21421 # * Updated iris-ansi; corrected vt102-w.
21422 # * Switch base xterm entry to 3.3 level.
21423 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21425 # * Removed rmir/smir from tv92B.
21427 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21428 # * add hds200 description (Walter Skorski)
21429 # * add beterm entry (Fred Fish)
21430 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21431 # iris-color entries.
21432 # * add emx entries.
21433 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
21434 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
21436 # * remove sgr string from qnx based on report by Xiaodan Tang
21437 # * Added u8/u9, removed rmul/smul from sun-il.
21438 # * 4.2 tic displays \0 rather than \200.
21439 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21440 # apparently based on cp-866).
21441 # * Merged in Pavel Roskin's acsc for linux-koi8
21442 # * Corrected some erroneous \\'s to \.
21443 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21444 # * II -> ii in pcvtXX, screen, xterm.
21445 # * Removed \n chars following ANSI escapes in sgr & friends.
21446 # * Updated Wyse entries.
21447 # * h19 corrections from Tim Pierce.
21448 # * Noted that the dm2500 has both ich and smir.
21449 # * added pccons for the Alpha under OSF/1.
21450 # * Added Sony NEWS workstation entries and cit101e-rv.
21451 # * Reverted `amiga'; to Kent Polk's version, as I'm told
21452 # the Verkuil entry messes up with Amiga Telnet.
21453 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
21454 # * Corrected attributions in 10.2.0 release notes.
21455 # * Scanned the Shuford archive for new terminfos and information.
21456 # * Removed sgr from qnx entry (Thomas Dickey).
21457 # * Added entries for ICL and Kokusai Data Systems terminals.
21458 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
21459 # * Incorporated att700 from the Boundless Technology FTP site.
21460 # * Miscellaneous contact-address and Web-page updates.
21462 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
21465 # * add nxterm and xterm-color terminfo description (request by Cristian
21466 # Gafton <gafton@redhat.com>).
21467 # * modify rxvt terminfo description to clear alternate screen before
21468 # switching back to normal screen, for compatibility with applications
21469 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21470 # * modify linux terminfo description to reset color palette (reported
21471 # by Telford Tendys <telford@eng.uts.edu.au>).
21474 # * merge changes from current XFree86 xterm terminfo descriptions.
21477 # * Added minitel1 entries from Alexander Montaron.
21478 # * Added qnxt2 from Federico Bianchi.
21479 # * Added arm100 terminfo entries from Dave Millen.
21482 # * Added ncsa telnet entries from Francesco Potorti
21485 # * modify ncsa telnet entry to reflect color, other capabilities based on
21486 # examination of the source code - T.Dickey.
21489 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
21492 # * Added Francesco Potorti's tuned Wyse 99 entries.
21493 # * dtterm enacs correction from Alexander V. Lukyanov.
21494 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
21495 # * correct a typo in icl6404 entry.
21496 # * add xtermm and xtermc
21499 # * format most %'char' sequences to %{number}
21500 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
21501 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
21504 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
21505 # * correct initialization string in xterm-r5, add misc other features
21506 # to correspond with xterm patch 84 - TD
21509 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
21510 # * add Mathew Vernon's mach console entries
21511 # * corrections for ncsa function-keys (report by Larry Virden)
21514 # * change linux to use ncv#2, since underline does not work with color - TD
21517 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
21518 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21519 # application modes, change kent to use the correct keypad code - TD
21522 # * add entry for Tera Term - TD
21525 # * minor improvements for teraterm entry - TD
21526 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
21527 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
21530 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
21531 # xterm and ncsa entries by removing the unneeded ones. Note that
21532 # some entries will return kend & khome versus kslt and kfnd, for
21533 # PC-style keyboards versus strict vt220 compatiblity - TD
21536 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
21538 # * add 'crt' entry - TD
21539 # * correct typos in 'linux-c' entry - TD
21542 # * update entries for BSD/OS console to use klone+sgr and klone+color
21543 # (Jeffrey C Honig)
21546 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
21549 # * add linux-lat, from RedHat patches to ncurses 4.2
21552 # * add complete set of default function-key definitions for scoansi - TD.
21555 # * add cnorm, cvvis for Linux 2.2 kernels
21558 # * add kmous to xterm-r5 -TD
21559 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
21560 # parent "use" clause -TD
21563 # * corrected cnorm, added el1 in 'screen' description -TD
21566 # * add ms-vt100 -TD
21569 # * corrections to beterm entry -TD
21572 # * add cygwin entry -TD
21575 # * minor corrections for beterm entry -TD
21578 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
21581 # * add amiga-8bit entry
21582 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
21583 # rcons-color, based on
21584 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
21585 # * add alias for iris-ansi-net
21588 # * corrected scoansi entry's acsc, some function keys, add color -TD
21591 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
21592 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
21593 # key mapping, leaving Potorti's entries more like he named them -TD
21594 # * remove enter/exit am-mode from cygwin -TD
21597 # * correct typos in several entries (missing '[' from CSI):
21598 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
21599 # strings for avt-ns -TD
21600 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
21603 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
21604 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
21605 # * add xterm-88color and xterm-256color -TD
21608 # * add "obsolete" termcap strings -TD
21609 # * add kvt and gnome entries -TD
21612 # * correct cup string for regent100 -TD
21615 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
21616 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
21617 # * change OTrs capabilities to rs2 -TD
21618 # * add obsolete and extended capabilities to 'screen' -TD
21621 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
21623 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
21624 # and adding kcbt -TD
21627 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
21628 # nonstandard resource settings -TD
21631 # * minor fixes for xterm-*, based on Debian #58530 -TD
21634 # * add several terminal types from esr's "11.0", as well as comments.
21635 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
21636 # vt220-8bit, vt220-old, wy85-8bit
21639 # * add several terminal types from esr's "11.0.1" (ansi-*).
21640 # * update OTxx capabilities for changes on 2000/3/4.
21641 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
21644 # * move screen's AX extension to ecma+color, modify several entries to
21645 # use that, adjusting ncv as needed -TD
21648 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
21649 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
21650 # in esr's version.
21653 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
21654 # * correct color definition for ibm3164, make minor changes to other
21655 # IBM terminal definitions based on recent terminfo descriptions -TD
21658 # * add mgterm, from NetBSD -TD
21659 # * add alias sun-cgsix for sun-ss5 as per NetBSD
21660 # * change cons25w to use rs2 for reset rather than rs1 -TD
21661 # * add rc/sc to aixterm based on manpage -TD
21664 # * remove ncv from xterm-16color, xterm-256color
21667 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
21670 # * add Eterm (Michael Jennings)
21673 # * add amiga-vnc entry.
21676 # * correct description of Top Gun Telnet.
21677 # * add kterm-color
21680 # * add qansi* entries from QNX ftp site.
21683 # * add Matrix Orbital entries by Eric Z. Ayers).
21684 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
21688 # * add S0, E0 extensions to screen's entry -TD
21691 # * several corrections based on tic's new parameter-checking code -TD
21692 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
21693 # bracketing sequences that reset video attributes (\E8 would restore
21697 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
21700 # * improved scoansi, based on SCO man-page, and testing console,
21701 # scoterm with tack -TD
21704 # * modify kterm to use acsc via SCS controls.
21707 # * screen 3.9.8 allows xterm mouse controls to pass-through
21710 # * remove spurious "%|" from some xterm entries.
21713 # * modify 'screen' khome/kend to match screen 3.09.08
21714 # * add examples of 'screen' customization (screen.xterm-xfree86,
21715 # screen.xterm-r6, screen.teraterm) -TD
21718 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
21719 # * add "Apple_Terminal" entries -Benjamin Sittler
21720 # * remove time-delays from "Apple_Terminal" entries -TD
21721 # * make sgr entries time-delays consistent with individual caps -TD
21724 # * corrected/updated screen.xterm-xfree86
21727 # * ELKS descriptions, from Federico Bianchi
21728 # * add u6 (CSR) to Eterm (Michael Jennings).
21731 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
21732 # tic which handles names no longer than 14 characters. Add
21733 # corresponding descriptions for the Darwin PowerPC console named
21734 # "xnuppc" -Benjamin Sittler
21737 # * change kbs in mach entries to ^? (Marcus Brinkmann).
21740 # * add "putty" entry -TD
21741 # * updated "Apple_Terminal" entries -Benjamin Sittler
21744 # * add ms-vt100-color entry -TD
21745 # * add "konsole" entries -TD
21748 # * update gnome entry to Redhat 7.2 -TD
21751 # * add kf13-kf48 strings to cons25w -TD
21752 # * add pcvt25-color entry -TD
21753 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
21754 # * improve some features of scoansi entry based on SCO's version -TD
21755 # * add scoansi-new entry corresponding to OpenServer 5.0.6
21758 # * add kcbt to screen entry -TD
21761 # * add rxvt-16color, ibm+16color, mvterm entries -TD
21764 # * split out linux-basic entry, making linux-c inherit from that, and
21765 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
21766 # the history of this console type -TD
21767 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
21768 # r/g/b parameters of initc are in the range 0 to 1000 -TD
21771 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
21774 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
21775 # in the latter -TD
21778 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
21779 # * ncr260wy350pp has only 16 color pairs -TD
21780 # * add sun-type4 from NetBSD -TD
21781 # * update xterm-xfree86 to current (patch 170) -TD
21782 # * add screen-bce, screen-s entries -TD
21783 # * add xterm-1002, xterm-1003 entries -TD
21786 # * update homepage for Top Gun Telnet/SSH
21789 # * reduce duplication in emx entries, added emx-base -TD
21792 # * corrected acs for screen.teraterm -TD
21793 # * add tkterm entry -TD
21796 # * cygwin changes from Charles Wilson:
21797 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
21798 # primary instead of nxterm, to match XFree86's xterm.terminfo
21799 # usage and to prevent circular links.
21800 # (rxvt): add additional codes from rxvt.org.
21801 # (rxvt-color): new alias
21802 # (rxvt-xpm): new alias
21803 # (rxvt-cygwin): like rxvt, but with special acsc codes.
21804 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
21805 # with a "native" MSWin GUI. Each takes different acsc codes,
21806 # which are both different from the "normal" rxvt's acsc.
21807 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
21808 # (cygwinDBG): ditto.
21811 # * update gnome terminal entries -TD
21814 # * add entries for djgpp 2.03 and 2.04 -TD
21817 # * add alias for vtnt -TD
21818 # * update xterm-xfree86 for XFree86 4.4 -TD
21821 # * add linux-vt (Andrey V Lukyanov)
21824 # * add screen.linux -TD
21827 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
21830 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
21831 # * add vt100+ and vt-utf8 entries -TD
21832 # * add uwin entry -TD
21835 # * add sgr strings to several common entries lacking them, e.g.,
21836 # screen, to make the entries more portable -TD
21837 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
21838 # * similar fixups for cvvis/cnorm various entries -TD
21841 # * remove 'ncv' from xterm-256color (patch 188) -TD
21845 # * add xterm-xf86-v44 -TD
21846 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
21847 # on G1 being used via an ISO-2022 escape sequence (report by
21848 # Juliusz Chroboczek) -TD
21849 # * add 'hurd' entry -TD
21852 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
21854 # * align with xterm #192's use of xterm-new -TD
21855 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
21856 # * make xterm-new the default "xterm" -TD
21859 # * minor fixes for emu -TD
21861 # * add rmam/smam to linux (Trevor Van Bremen)
21862 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
21863 # * fixes for avatar0 -TD
21864 # * fixes for vp3a+ -TD
21867 # * add xterm-pc-fkeys -TD
21868 # * review/update gnome and gnome-rh90 entries (prompted by
21869 # Redhat Bugzilla #122815) -TD
21870 # * review/update konsole entries -TD
21871 # * add sgr, correct sgr0 for kterm and mlterm -TD
21872 # * correct tsl string in kterm -TD
21875 # * make ncsa-m rmacs/smacs consistent with sgr -TD
21876 # * add sgr, rc/sc and ech to syscons entries -TD
21877 # * add function-keys to decansi -TD
21878 # * add sgr to mterm-ansi -TD
21879 # * add sgr, civis, cnorm to emu -TD
21880 # * correct/simplify cup in addrinfo -TD
21881 # * corrections for gnome and konsole entries
21882 # (Redhat Bugzilla #122815) -Hans de Goede
21883 # * modify DEC entries (vt220, etc), to add sgr string, and to use
21884 # ISO-2022 strings for rmacs/smacs -TD
21887 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
21890 # * improved putty entry -Robert de Bath
21893 # * remove dch/dch1 from rxvt because they are implemented inconsistently
21894 # with the common usage of bce/ech -TD
21895 # * remove khome from vt220 (vt220's have no home key) -TD
21896 # * add rxvt+pcfkeys -TD
21899 # * modify several entries to ensure xterm mouse and cursor visibility
21900 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
21901 # Eterm, screen. (The xterm entries are left alone - old ones for
21902 # compatibility, and the new ones do not require this change) -TD
21905 # * add morphos entry -Pavel Fedin
21906 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
21907 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
21910 # * update wsvt25 entry -TD
21913 # * update pairs for xterm-88color and xterm-256color to reflect the
21914 # ncurses extended-color support -TD
21917 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
21918 # * add aixterm-16color to demonstrate 16-color capability -TD
21921 # * add media-copy to vt100 -TD
21922 # * corrected acsc string for vt52 -TD
21925 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
21927 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
21930 # * re-corrected acsc string for vt52 -TD
21933 # * corrected sun-il sgr string which referred to bold and underline -TD
21934 # * add sun-color entry -TD
21937 # * modify sgr0 in several entries to reset alternate-charset as in the
21939 # * modify sgr string of prism9 to better match the individual
21943 # * correct order of use= in rxvt-basic -TD
21946 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
21949 # * other minor fixes to cygwin based on tack -TD
21950 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
21953 # * add nsterm-16color entry -TD
21954 # * remove ncv flag from xterm-16color -TD
21955 # * remove setf/setb from xterm-256color to match xterm #209 -TD
21956 # * update mlterm entry to 2.9.2 -TD
21959 # * fixes to make nsterm-16color match report
21960 # by Christian Ebert -Alain Bench
21963 # * add xterm+256color building block -TD
21964 # * add gnome-256color, putty-256color, rxvt-256color -TD
21967 # * add hpterm-color -TD
21970 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
21971 # * add gnome-fc5 (prompted by GenToo #122566) -TD
21972 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
21973 # * improve xterm-256color by combining the ibm+16color setaf/setab
21974 # strings with SGR 48. The setf/setb strings also are cancelled here
21975 # rather than omitted so derived entries will cancel those also -Alain
21979 # * add some notes regarding copyright to terminfo.src -TD
21980 # * use rxvt+pcfkeys in Eterm -TD
21981 # * remove km and flash from gnome, Eterm and rxvt since they do not work
21982 # as one would expect (km sends ESC rather than setting the 8th bit
21984 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
21985 # * add konsole-solaris -TD
21988 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
21989 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
21990 # * modify xterm-24 to inherit from "xterm" -TD
21991 # * add xiterm entry -TD
21992 # * add putty-vt100 entry -TD
21993 # * corrected spelling of Michael A Dorman's name, prompted by
21994 # http://www.advogato.org/person/mdorman/diary.html -TD
21997 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
21998 # * update xterm+pcfkeys to match xterm #216 -TD
22001 # * make descriptions of xterm entries consistent with its terminfo -TD
22004 # * add xfce, mgt -TD
22007 # * correct acsc string in kterm -TD
22010 # * add kon entry -TD
22011 # * remove invis from linux and related entries, add klone+sgr8 for those
22012 # that implement the feature (or have not been shown to lack it) -TD
22015 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22016 # * minor improvements to rxvt+pcfkeys -TD
22019 # * fix a few typos in if/then/else expressions -TD
22022 # * add several GNU Screen variations with 16- and 256-colors, and
22023 # status line (Alain Bench).
22026 # * add Newbury Data entries (Jean-Charles Billaud).
22029 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22032 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22033 # * add konsole-256color entry -TD
22036 # * add 9term entry (request by Juhapekka Tolvanen) -TD
22039 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
22040 # * add shift-control- and control-modified keys for rxvt editing
22042 # * update mlterm entry to 2.9.3 -TD
22043 # * add mlterm+pcfkeys -TD
22046 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
22047 # xterm+pcc0, etc., to make the corresponding building blocks reflect
22048 # xterm's capabilities -TD
22049 # * add mrxvt entry -TD
22050 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22053 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
22056 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22057 # xterm starting with patch #216 -TD
22058 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
22059 # to match xterm #230 -TD
22060 # * extend xterm+pccX entries to match xterm #230 -TD
22061 # * add xterm+app, xterm+noapp, from xterm #230 -TD
22062 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22065 # * add screen.rxvt -TD
22068 # * add screen+fkeys (prompted by Debian # 478094) -TD
22071 # * add screen.mlterm -TD
22072 # * improve mlterm and mlterm+pcfkeys -TD
22075 # * add Eterm-256color, Eterm-88color -TD
22076 # * add rxvt-88color -TD
22079 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22080 # original to teraterm2.3 -TD
22081 # * update "gnome" to 2.22.3 -TD
22082 # * update "konsole" to 1.6.6 -TD
22083 # * add "aterm" -TD
22084 # * add "linux2.6.26" -TD
22087 # * change several \E[2g (clear tab at current column) to \E[3g
22088 # (clear all tabs) to match definition for tbc capability -TD
22091 # * add eterm-color -TD
22094 # * add screen.Eterm -TD
22097 # * correct typo in pfkey of ansi.sys-old
22098 # (report by Kalle Olavi Niemitalo)
22099 # * move function- and cursor-keys from emx-base to ansi.sys, and create
22100 # a pfkey capability which handles F1-F48 -TD
22103 # * add vwmterm entry (Bryan Christ)
22106 # * change ncv and op capabilities in sun-color to match Sun's entry for
22107 # this (report by Laszlo Peter)
22108 # * improve interix smso by using reverse rather than bold (report by
22109 # Kristof Zelechovski).
22112 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
22113 # * add linux-16color (Benjamin Sittler)
22114 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
22115 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
22116 # * add ccc and initc capabilities to xterm-16color -TD
22119 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
22122 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
22125 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
22126 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
22129 # * add bterm (bogl 0.1.18) -TD
22130 # * minor fix to rxvt+pcfkeys -TD
22133 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
22136 # * add several screen-bce.XXX entries -TD
22138 # The following sets edit modes for GNU EMACS.
22143 # comment-start-skip:"^#+"
22144 # comment-start:"# "
22145 # compile-command:"tic -c terminfo.master"
22147 ######## SHANTIH! SHANTIH! SHANTIH!