1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2014/06/14 21:16:34 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### Atari ST terminals
703 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
705 tw52|tw52-color|Toswin window manager with color,
707 colors#16, pairs#256,
708 oc=\Eb?\Ec0, op=\Eb?\Ec0,
709 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
710 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
711 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 tw52-m|Toswin window manager monochrome,
717 bold=\Eya, dch1=\Ea, dim=\EyB,
718 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
719 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
720 smso=\EyQ, smul=\EyH, use=at-m,
721 tt52|Atari TT medium and high resolution,
722 lines#30, use=at-color,
723 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
725 colors#16, pairs#256,
726 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
727 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
728 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
729 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
734 cols#80, it#8, lines#24,
735 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
736 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
737 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
738 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
739 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
740 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
741 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
742 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
743 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
744 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
745 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
746 tw100|toswin vt100 window mgr,
748 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
749 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
750 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
751 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
753 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
754 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
755 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
756 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
757 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
758 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
759 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
760 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
761 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
762 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
763 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
764 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
765 rmso=\E[m, rmul=\E[m,
766 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
768 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
769 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
770 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
771 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
772 # The entries for stv52 and stv52pc probably need a revision.
773 stv52|MiNT virtual console,
775 cols#80, it#8, lines#30,
776 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
777 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
779 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
780 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
781 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
782 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
783 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
784 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
785 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
786 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
787 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
788 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
789 stv52pc|MiNT virtual console with PC charset,
791 cols#80, it#8, lines#30,
792 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
793 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
794 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
796 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
797 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
798 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
799 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
800 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
801 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
802 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
803 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
804 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
807 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
810 cols#80, it#8, lines#25,
811 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
813 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
814 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
815 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
816 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
817 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
819 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
821 # MiNT VT52 emulation. 80 columns, 25 rows.
822 # MiNT is Now TOS, the operating system which comes with all Ataris now
823 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
824 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
825 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
826 st52-old|Atari ST with VT52 emulation,
829 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
830 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
831 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
832 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
833 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
834 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
835 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
836 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
837 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
840 #### Apple Terminal.app
842 # nsterm*|Apple_Terminal - AppKit Terminal.app
844 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
845 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
846 # Server and Mac OS X operating systems. There is also a
847 # "terminal.app" in GNUStep, but I believe it to be an unrelated
848 # codebase and I have not attempted to describe it here.
850 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
851 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
852 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
853 # version supports color.
855 # To determine the version of Terminal.app you're using by running:
857 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
859 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
861 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
863 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
865 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
867 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
869 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
870 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
871 # might work too, but really you're on your own here since these
872 # systems are very obsolete and I can't test them. I do welcome
873 # patches, though :).
877 # For GNUstep_Terminal, you're probably best off using "linux" or
878 # writing your own terminfo.
880 # For MacTelnet, you're on your own. It's a different codebase, and
881 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
883 # For iTerm.app, see "iterm".
886 # The AppKit Terminal.app descriptions all have names beginning with
887 # "nsterm". Note that the statusline (-s) versions use the window
888 # titlebar as a phony status line, and may produce warnings during
889 # compilation as a result ("tsl uses 0 parameters, expected 1".)
890 # Ignore these warnings, or even ignore these entries entirely. Apps
891 # which need to position the cursor or do other fancy stuff inside the
892 # status line won't work with these entries. They're primarily useful
893 # for programs like Pine which provide simple notifications in the
894 # status line. Please note that non-ASCII characters don't work right
895 # in the status line, since Terminal.app incorrectly interprets their
896 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
897 # versions) or only accepts status lines consisting entirely of
898 # characters from the first 256 Unicode positions (including C1 but
901 # The Mythology* of AppKit Terminal.app:
903 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
904 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
905 # shareware replacement for Terminal called "Stuart" which NeXT bought
906 # and used as the basis for the Terminal.app in NeXTstep 2+,
907 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
908 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
909 # capabilities for the early versions, but I believe that the
910 # TERM_PROGRAM_VERSION may have been reset at some point.
912 # The early versions were tailored to the NeXT character set. Sometime
913 # after the Apple aquisition the encoding was swiched to MacRoman
914 # (initally with serious altcharset bugs due to incomplete conversion
915 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
916 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
917 # 8-color support (initially buggy when combined with attributes, but
918 # that was later fixed.) More recently, around Mac OS X version 10.3
919 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
920 # some versions (for instance 133-1 which shipped with Mac OS X
921 # version 10.4) this suffered from the <bce> bug, but that seems to
922 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
924 # In the early days of Mac OS X the terminal was fairly buggy and
925 # would routinely crash under load. Many of these bugs seem to have
926 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
927 # some may still remain. This change seems to correspond to
928 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
931 # * This may correspond with what actually happened, but I don't
932 # know. It is based on guesswork, hearsay, private correspondence,
933 # my faulty memory, and the following online sources and references:
935 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
936 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
938 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
939 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
941 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
942 # "nsterm" to comply with the name length and case conventions and
943 # limitations of various software packages [notably Solaris terminfo
944 # and UNIX.] A single Apple_Terminal alias is retained for
945 # backwards-compatbility.
947 # * Added function key support (F1-F4). These only work in Terminal.app
948 # version 51, hopefully the capabilities won't cause problems for people
951 # * Added "full color" (-c) entries which support the 16-color mode in
954 # * By default, version 51 uses UTF-8 encoding with broken altcharset
955 # support, so "ASCII" (-7) entries without altcharset support were
958 # nsterm - AppKit Terminal.app
960 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
961 # Terminal.app. It is a partial VT100 emulation with some xterm-like
962 # extensions. This terminfo was written to describe versions 41
963 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
964 # version 10.1) of Terminal.app.
966 # Terminal.app runs under the Mac OS X Quartz windowing system (and
967 # other AppKit-supported windowing systems.) On the Mac OS X machine I
968 # use, the executable for Terminal.app is:
969 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
971 # If you're looking for a description of the full-screen system
972 # console which runs under Apple's Darwin operating system on PowerPC
973 # platforms, see the "xnuppc" entry instead.
975 # There were no function keys in version 41. In version 51, there are
976 # four working function keys (F1, F2, F3 and F4.) The function keys
977 # are included in all of these entries.
979 # It does not support mouse pointer position reporting. Under some
980 # circumstances the cursor can be positioned using option-click; this
981 # works by comparing the cursor position and the selected position,
982 # and simulating enough cursor-key presses to move the cursor to the
983 # selected position. This technique fails in all but the simplest
986 # It provides partial ANSI color support (background colors interacted
987 # badly with bold in version 41, though, as reflected in :ncv:.) The
988 # monochrome (-m) entries are useful if you've disabled color support
989 # or use a monochrome monitor. The full color (-c) entries are useful
990 # in version 51, which doesn't exhibit the background color bug. They
991 # also enable an xterm-compatible 16-color mode.
993 # The configurable titlebar is set using xterm-compatible sequences;
994 # it is used as a status bar in the statusline (-s) entries. Its width
995 # depends on font sizes and window sizes, but 50 characters seems to
996 # be the default for an 80x24 window.
998 # The MacRoman character encoding is used for some of the alternate
999 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1000 # disable alternate character set support entirely, and the "VT100"
1001 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1002 # graphics emulation, which seems to think the character encoding is
1003 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1004 # are useful in Terminal.app version 51, which supports UTF-8 and
1005 # other ASCII-compatible character encodings but does not correctly
1006 # implement VT100 graphics; once VT100 graphics are correctly
1007 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1008 # usable in any ASCII-compatible character encoding [except perhaps
1009 # in UTF-8, where some experts argue for disallowing alternate
1010 # characters entirely.]
1012 # Terminal.app reports "vt100" as the terminal type, but exports
1013 # several environment variables which may aid detection in a shell
1014 # profile (i.e. .profile or .login):
1017 # TERM_PROGRAM=Apple_Terminal
1018 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1019 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1021 # For example, the following Bourne shell script would detect the
1022 # correct terminal type:
1024 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1027 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1035 # In a C shell derivative, this would be accomplished by:
1037 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1038 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1039 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1040 # setenv TERM "nsterm-old"
1042 # setenv TERM "nsterm-c-7"
1047 # The '+' entries are building blocks
1048 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1049 am, bw, msgr, xenl, xon,
1050 cols#80, it#8, lines#24,
1051 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1052 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1053 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1054 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1055 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1056 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1057 ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1058 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1059 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1060 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1061 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
1062 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1063 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1065 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1067 enacs=\E(B\E)0, rmacs=^O,
1068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1069 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1071 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1072 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
1073 enacs=\E(B\E)0, rmacs=^O,
1074 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1075 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1077 # compare with xterm+sl-twm
1078 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1079 wsl#50, use=xterm+sl-twm,
1081 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1082 op=\E[0m, use=ibm+16color,
1084 nsterm+c41|AppKit Terminal.app v41 color support,
1085 colors#8, ncv#37, pairs#64,
1086 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1088 # These are different combinations of the building blocks
1090 # ASCII charset (-7)
1091 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1094 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1095 use=nsterm+s, use=nsterm+7,
1097 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1098 use=nsterm+c41, use=nsterm+7,
1100 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1101 use=nsterm+c, use=nsterm+7,
1103 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1104 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1106 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1107 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1109 # VT100 alternate-charset (-acs)
1110 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1113 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1114 use=nsterm+s, use=nsterm+acs,
1116 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1117 use=nsterm+c41, use=nsterm+acs,
1119 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1120 use=nsterm+c, use=nsterm+acs,
1122 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1123 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1125 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1126 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1129 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1132 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1133 use=nsterm+s, use=nsterm+mac,
1135 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1136 use=nsterm+c41, use=nsterm+mac,
1138 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1139 use=nsterm+c, use=nsterm+mac,
1141 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1142 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1144 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1145 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1147 # In Mac OS X version 10.5 the format of the preferences has changed
1148 # and a new, more complex technique is needed, e.g.,
1150 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1151 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1152 # ud.init();prefs=ud.persistentDomainForName_(
1153 # "com.apple.Terminal");prefs["Window Settings"][
1154 # prefs["Default Window Settings"]]["TerminalType"
1155 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1156 # "com.apple.Terminal")' nsterm-16color
1158 # and it is still not settable from the preferences dialog. This is
1159 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1160 # in Apple's bug reporter.
1162 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1163 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1164 # vt52, vt100, vt102 and xterm.
1165 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1167 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1168 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1169 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1170 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1171 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1172 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1173 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1174 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1175 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1176 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1178 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1179 # the background color erase feature. The newer version 240.2 in Mac OS X
1180 # version 10.5 does not.
1182 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1183 # and D P Schreber comparing to nsterm-c-s-acs.
1185 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1186 # can be set in Terminal.app, e.g.,
1188 # defaults write com.apple.Terminal TermCapString nsterm-bce
1190 # and that it is not set in Terminal's preferences dialog.
1192 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1195 # * The terminal description matches the default settings.
1196 # * The keyboard is configurable via a dialog.
1197 # * By default khome, kend, knext and kprev are honored only with a
1199 # * There are bindings for control left/right arrow (but not up/down).
1200 # Added those to nsterm-16color, which is the version used for OS X 10.6
1201 # * "Allow VT100 application keypage mode" is by default disabled.
1202 # There is no way to press keypad-comma unless application mode is enabled
1204 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1205 # * CHT, REP, SU, SD are buggy.
1206 # * ECH works (also in Leopard), but is not used here for compatibility.
1207 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1208 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1209 # nsterm entry from this file to override the MacPorts (20110404) or
1210 # system (20081102) copy of this file.
1211 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1212 # dialog defaults to xterm-256color. Alternative selections are ansi,
1213 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1214 # the menu says "Declare terminal as" without promising to actually emulate
1215 # the corresponding terminals. Indeed, changing TERM does not affect the
1216 # emulation itself. This means that
1217 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1219 # + the color model is the same for each setting of TERM (does not match
1221 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1222 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1223 # + the vt52 emulation does not give a usable shell because screen-clearing
1224 # does not work as expected.
1225 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1226 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1227 bce, use=nsterm-16color,
1229 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1230 # TERM_PROGRAM_VERSION=309
1231 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1232 # TERM_PROGRAM_VERSION=303
1233 nsterm-256color|Terminal.app in OS X 10.8,
1234 use=xterm+256setaf, use=nsterm-bce,
1236 # This is an alias which should always point to the "current" version
1237 nsterm|Apple_Terminal|AppKit Terminal.app,
1238 use=nsterm-256color,
1240 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1241 # more featureful) terminal emulator for Mac OS X. It is similar
1242 # enough in capabilities to nsterm-16color that I have derived this
1243 # description from that one, but as far as I know they share no code.
1244 # Many of the features are user-configurable, but I attempt only to
1245 # describe the default configuration.
1247 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1249 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1251 csr@, dim@, kend=\EOF, khome=\EOH,
1252 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1253 use=xterm+256setaf, use=nsterm-16color,
1255 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1257 # On PowerPC platforms, Apple's Darwin operating system uses a
1258 # full-screen system console derived from a NetBSD framebuffer
1259 # console. It is an ANSI-style terminal, and is not really VT-100
1262 # Under Mac OS X, this is the system console driver used while in
1263 # single-user mode [reachable by holding down Command-S during the
1264 # boot process] and when logged in using console mode [reachable by
1265 # typing ">console" at the graphical login prompt.]
1267 # If you're looking for a description of the Terminal.app terminal
1268 # emulator which runs under the Mac OS X Quartz windowing system (and
1269 # other AppKit-supported windowing systems,) see the "nsterm"
1272 # NOTE: Under Mac OS X version 10.1, the default login window does not
1273 # prompt for user name, instead requiring an icon to be selected from
1274 # a list of known users. Since the special ">console" login is not in
1275 # this list, you must make one of two changes in the Login Window
1276 # panel of the Login section of System Prefs to make the special
1277 # ">console" login accessible. The first option is to enable 'Show
1278 # "Other User" in list for network users', which will add a special
1279 # "Other..." icon to the graphical login panel. Selecting "Other..."
1280 # will present the regular graphical login prompt. The second option
1281 # is to change the 'Display Login Window as:' setting to 'Name and
1282 # password entry fields', which replaces the login panel with a
1283 # graphical login prompt.
1285 # There are no function keys, at least not in Darwin 1.3.
1287 # It has no mouse support.
1289 # It has full ANSI color support, and color combines correctly with
1290 # all three supported attributes: bold, inverse-video and underline.
1291 # However, bold colored text is almost unreadable (bolding is
1292 # accomplished using shifting and or-ing, and looks smeared) so bold
1293 # has been excluded from the list of color-compatible attributes
1294 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1295 # monochrome monitor.
1297 # There is one serious bug with this terminal emulation's color
1298 # support: repositioning the cursor onto a cell with non-matching
1299 # colors obliterates that cell's contents, replacing it with a blank
1300 # and displaying a colored cursor in the "current" colors. There is
1301 # no complete workaround at present [other than using the monochrome
1302 # (-m) entries,] but removing the (msgr) capability seemed to help.
1304 # The "standout" chosen was simple reverse-video, although a colorful
1305 # standout might be more aesthetically pleasing. Similarly, the bold
1306 # chosen is the terminal's own smeared bold, although a simple
1307 # color-change might be more readable. The color-bold (-b) entries
1308 # uses magenta colored text for bolding instead. The fancy color (-f
1309 # and -f2) entries use color for bold, standout and underlined text
1310 # (underlined text is still underlined, though.)
1312 # Apparently the terminal emulator does support a VT-100-style
1313 # alternate character set, but all the alternate character set
1314 # positions have been left blank in the font. For this reason, no
1315 # alternate character set capabilities have been included in this
1316 # description. The console driver appears to be ASCII-only, so (enacs)
1317 # has been excluded [although the VT-100 sequence does work.]
1319 # The default Mac OS X and Darwin installation reports "vt100" as the
1320 # terminal type, and exports no helpful environment variables. To fix
1321 # this, change the "console" entry in /etc/ttys from "vt100" to
1322 # "xnuppc-WxH", where W and H are the character dimensions of your
1323 # console (see below.)
1325 # The font used by the terminal emulator is apparently one originally
1326 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1327 # file includes descriptions for the following geometries:
1329 # Pixels Characters Entry Name (append -m for monochrome)
1330 # -------------------------------------------------------------------
1331 # 640x400 80x25 xnuppc-80x25
1332 # 640x480 80x30 xnuppc-80x30
1333 # 720x480 90x30 xnuppc-90x30
1334 # 800x600 100x37 xnuppc-100x37
1335 # 896x600 112x37 xnuppc-112x37
1336 # 1024x640 128x40 xnuppc-128x40
1337 # 1024x768 128x48 xnuppc-128x48
1338 # 1152x768 144x48 xnuppc-144x48
1339 # 1280x1024 160x64 xnuppc-160x64
1340 # 1600x1024 200x64 xnuppc-200x64
1341 # 1600x1200 200x75 xnuppc-200x75
1342 # 2048x1536 256x96 xnuppc-256x96
1344 # The basic "xnuppc" entry includes no size information, and the
1345 # emulator includes no reporting capability, so you'll be at the mercy
1346 # of the TTY device (which reports incorrectly on my hardware.) The
1347 # color-bold entries do not include size information.
1349 # The '+' entries are building blocks
1350 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1353 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1354 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1355 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1356 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1357 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1358 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1359 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1360 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1362 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1363 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1364 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1366 xnuppc+c|Darwin PowerPC Console ANSI color support,
1367 colors#8, ncv#32, pairs#64,
1368 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1370 xnuppc+b|Darwin PowerPC Console color-bold support,
1373 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1376 xnuppc+f|Darwin PowerPC Console fancy color support,
1378 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
1379 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1381 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1384 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1385 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1387 # Building blocks for specific screen sizes
1388 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1391 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1394 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1397 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1400 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1403 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1406 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1409 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1412 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1415 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1418 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1421 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1424 # These are different combinations of the building blocks
1426 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1429 xnuppc|darwin|Darwin PowerPC Console (color),
1430 use=xnuppc+c, use=xnuppc+basic,
1432 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1435 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1436 use=xnuppc+b, use=xnuppc+c,
1438 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1441 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1442 use=xnuppc+f, use=xnuppc+c,
1444 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1447 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1448 use=xnuppc+f2, use=xnuppc+c,
1450 # Combinations for specific screen sizes
1451 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1452 use=xnuppc+80x25, use=xnuppc+basic,
1454 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1455 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1457 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1458 use=xnuppc+80x30, use=xnuppc+basic,
1460 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1461 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1463 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1464 use=xnuppc+90x30, use=xnuppc+basic,
1466 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1467 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1469 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1470 use=xnuppc+100x37, use=xnuppc+basic,
1472 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1473 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1475 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1476 use=xnuppc+112x37, use=xnuppc+basic,
1478 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1479 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1481 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1482 use=xnuppc+128x40, use=xnuppc+basic,
1484 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1485 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1487 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1488 use=xnuppc+128x48, use=xnuppc+basic,
1490 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1491 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1493 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1494 use=xnuppc+144x48, use=xnuppc+basic,
1496 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1497 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1499 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1500 use=xnuppc+160x64, use=xnuppc+basic,
1502 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1503 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1505 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1506 use=xnuppc+200x64, use=xnuppc+basic,
1508 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1509 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1511 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1512 use=xnuppc+200x75, use=xnuppc+basic,
1514 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1515 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1517 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1518 use=xnuppc+256x96, use=xnuppc+basic,
1520 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1521 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1526 # BeOS entry for Terminal program Seems to be almost ANSI
1527 beterm|BeOS Terminal,
1528 am, eo, mir, msgr, xenl, xon,
1529 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1530 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1531 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1532 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1533 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1534 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1535 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1536 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1537 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1538 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1539 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1540 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1541 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1542 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1543 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1544 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1545 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1546 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1547 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1548 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1554 # This entry is good for the 1.2.13 or later version of the Linux console.
1556 # ***************************************************************************
1559 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1560 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1561 # * character. Here are the keymap replacement lines that will set this up: *
1563 # keycode 15 = Tab Tab
1564 # alt keycode 15 = Meta_Tab
1565 # shift keycode 15 = F26
1566 # string F26 ="\033[Z"
1568 # * This has to use a key slot which is unfortunate (any unused one will *
1569 # * do, F26 is the higher-numbered one). The change ought to be built *
1570 # * into the kernel tables. *
1572 # ***************************************************************************
1574 # All linux kernels since 1.2.13 (at least) set the screen size
1575 # themselves; this entry assumes that capability.
1577 linux-basic|linux console,
1578 am, bce, eo, mir, msgr, xenl, xon,
1580 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1581 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1582 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1583 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1584 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1585 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1586 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
1587 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1588 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1589 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1590 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1591 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1592 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1593 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1594 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1595 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1596 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1597 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1598 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1599 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1600 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1603 linux-m|Linux console no color,
1605 setab@, setaf@, setb@, setf@, use=linux,
1607 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1608 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1609 # not supposedly back-portable to older SV curses (although it has worked fine
1610 # on Solaris for several years) and not supported in ncurses versions before
1612 linux-c-nc|linux console with color-change,
1614 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
1615 oc=\E]R, use=linux-basic,
1616 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1617 linux-c|linux console 1.3.6+ for older ncurses,
1619 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
1620 oc=\E]R, use=linux-basic,
1622 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1623 # get a block cursor for cvvis.
1624 # reported by Frank Heckenbach <frank@g-n-u.de>.
1625 linux2.2|linux 2.2.x console,
1626 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1627 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1629 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1630 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
1631 # Using SI/SO has the drawback that it confuses screen. SCS would work.
1632 # However, SCS is buggy (see comment in Debian #515609) -TD
1633 # Further, this breaks longstanding workarounds for Linux console's line
1634 # drawing (see Debian 665959) -TD
1635 linux2.6|linux 2.6.x console,
1637 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1638 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1640 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1641 # It is the same as xterm's erase-saved-lines feature.
1642 linux3.0|linux 3.0 kernels,
1643 E3=\E[3;J, use=linux2.6,
1645 # This is Linux console for ncurses.
1646 linux|linux console,
1649 # Subject: linux 2.6.26 vt back_color_erase
1650 # Changes to the Linux console driver broke bce model as reported in
1651 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1653 # http://lkml.org/lkml/2008/4/26/305
1654 # http://lkml.org/lkml/2008/10/3/66
1655 linux2.6.26|linux console w/o bce,
1658 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1659 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1660 ich@, ich1@, use=linux,
1662 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1663 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1664 linux-koi8|linux with koi8 alternate character set,
1665 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1666 use=linux, use=klone+koi8acs,
1668 # Another entry for KOI8-r with Qing Long's acsc.
1669 # (which one better complies with the standard?)
1670 linux-koi8r|linux with koi8-r alternate character set,
1671 use=linux, use=klone+koi8acs,
1673 # Entry for the latin1 and latin2 fonts
1674 linux-lat|linux with latin1 or latin2 alternate character set,
1675 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1678 # This uses graphics from VT codeset instead of from cp437.
1679 # reason: cp437 (aka "straight to font") is not functional under luit.
1680 # from: Andrey V Lukyanov <land@long.yar.ru>.
1681 linux-vt|linux console using VT codes for graphics,
1682 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1683 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1686 # This is based on the Linux console (relies on the console to perform some
1687 # of the functionality), but does not recognize as many control sequences.
1688 # The program comes bundled with an old (circa 1998) copy of the Linux
1689 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1690 # \E* move cursor to home, as as \E[H
1692 # \EE move cursor to beginning of row
1693 # \E[y,xf same as \E[y,xH
1695 # Note: The status-line support is buggy (dsl does not work).
1696 kon|kon2|jfbterm|Kanji ON Linux console,
1698 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1699 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1702 # 16-color linux console entry; this works with a 256-character
1703 # console font but bright background colors turn into dim ones when
1704 # you use a 512-character console font. This uses bold for bright
1705 # foreground colors and blink for bright background colors.
1706 linux-16color|linux console with 16 colors,
1707 colors#16, ncv#63, pairs#256,
1708 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1709 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1712 # bterm (bogl 0.1.18)
1713 # Implementation is in bogl-term.c
1714 # Key capabilities from linux terminfo entry
1717 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1718 # bterm does not support sgr, since it only processes one parameter -TD
1719 bterm|bogl virtual terminal,
1721 colors#8, cols#80, lines#24, pairs#64,
1722 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1723 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1724 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1725 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1726 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1727 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1728 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1729 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1730 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1731 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1732 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1733 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1734 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1735 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1740 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1743 cols#80, it#8, lines#25,
1744 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1746 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1747 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1748 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1749 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1750 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1751 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1752 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1753 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1754 smso=\E[7m, smul=\E[4m,
1755 mach-bold|Mach Console with bold instead of underline,
1756 rmul=\E[0m, smul=\E[1m, use=mach,
1757 mach-color|Mach Console with ANSI color,
1759 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1760 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1762 # From: Samuel Thibault
1763 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1764 # Files: i386/i386at/kd.c
1766 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1768 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1769 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1770 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1771 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1772 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1775 mach-gnu-color|Mach Console with ANSI color,
1777 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1778 setaf=\E[3%p1%dm, use=mach-gnu,
1780 # From: Marcus Brinkmann
1781 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1783 # Comments in the original are summarized here:
1785 # hurd uses 8-bit characters (km).
1787 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1789 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1790 # have the eat_newline_glitch. It doesn't support setting or removing tab
1793 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1794 # one byte instead three.
1796 # <ich1> is not included because hurd has insert mode.
1798 # hurd doesn't use ^J for scrolling, because this could put things into the
1799 # scrollback buffer.
1801 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1802 # This is a GNU extension.
1804 # The original has commented-out ncv, but is restored here.
1806 # Reading the source, RIS resets cnorm, but not xmous.
1807 hurd|The GNU Hurd console server,
1808 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1809 colors#8, it#8, ncv#18, pairs#64,
1810 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1811 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1812 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1813 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1814 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1815 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1816 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1817 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1818 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1819 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1820 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1821 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1822 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1823 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1824 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1825 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1826 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1827 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1828 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1829 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1830 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1832 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1833 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1834 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1841 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1842 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1843 # right corner without triggering a scroll. The ncurses terminfo library can
1844 # handle this case with the <ich1> capability, and prefers <am> for better
1845 # optimization. Bug: The <op> capability resets attributes.
1846 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1847 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1848 qnx|qnx4|qnx console,
1849 daisy, km, mir, msgr, xhpa, xt,
1850 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1851 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1852 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1853 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1854 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1855 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1856 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1857 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1858 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1859 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1860 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1861 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1862 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1863 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1864 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1865 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1866 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1867 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1868 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1869 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1870 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1871 kext=\377\270, kf1=\377\201, kf10=\377\212,
1872 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1873 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1874 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1875 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1876 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1877 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1878 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1879 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1880 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1881 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1882 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1883 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1884 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1885 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1886 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1887 khlp=\377\350, khome=\377\240, khts=\377\342,
1888 kich1=\377\253, kil1=\377\273, kind=\377\261,
1889 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1890 knp=\377\252, knxt=\377\312, kopn=\377\357,
1891 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1892 kprv=\377\302, krdo=\377\336, kref=\377\354,
1893 kres=\377\360, krfr=\377\347, kri=\377\271,
1894 krmir=\377\313, krpl=\377\362, krst=\377\352,
1895 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1896 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1897 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1898 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1899 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1903 qnxt|qnxt4|QNX4 terminal,
1906 qnxm|QNX4 with mouse events,
1908 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1909 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1910 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1911 smicm=\E/>2h, use=qnx4,
1916 # Monochrome QNX4 terminal or console. Setting this terminal type will
1917 # allow an application running on a color console to behave as if it
1918 # were a monochrome terminal. Output will be through stdout instead of
1919 # console writes because the term routines will recognize that the
1920 # terminal name starts with 'qnxt'.
1922 qnxtmono|Monochrome QNX4 terminal or console,
1926 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1927 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1928 # (TD: derive from original qnx4 entry)
1929 qnxt2|qnx 2.15 serial terminal,
1931 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1932 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1934 # QNX ANSI terminal definition
1937 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1938 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1940 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1941 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1942 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1943 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1944 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1945 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1946 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1947 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1948 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1949 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1950 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1951 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1952 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1953 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1954 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1955 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1956 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1957 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1958 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1959 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1960 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1961 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1962 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1963 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1964 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1965 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1966 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1967 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1968 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1969 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1970 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1971 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1972 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1973 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1974 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1975 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1976 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1977 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1978 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1979 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1980 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1981 smul=\E[4m, tbc=\E[3g,
1982 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1984 qansi|QNX ansi with console writes,
1985 daisy, xhpa, use=qansi-g,
1987 qansi-t|QNX ansi without console writes,
1990 qansi-m|QNX ansi with mouse,
1992 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1993 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1994 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1995 smicm=\E[>2h, use=qansi,
1997 qansi-w|QNX ansi for windows,
2002 # SCO console and SOS-Syscons console for 386bsd
2003 # (scoansi: had unknown capabilities
2004 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2005 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2006 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2007 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2008 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2009 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2010 # on the <smacs>=\E[12m -- esr)
2012 # klone+sgr-dumb is an error since the acsc does not match -TD
2014 # In this description based on SCO's keyboard(HW) manpage list of default
2015 # function key values:
2016 # F13-F24 are shifted F1-F12
2017 # F25-F36 are control F1-F12
2018 # F37-F48 are shift+control F1-F12
2020 # hpa/vpa work in the console, but not in scoterm:
2024 # SCO's terminfo uses
2027 # which do not work (console or scoterm).
2029 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2030 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2031 OTbs, am, bce, eo, xon,
2032 colors#8, cols#80, it#8, lines#25, pairs#64,
2033 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
2034 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2035 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2036 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2037 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2038 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2039 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2040 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2041 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2042 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2043 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2044 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2045 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2046 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2047 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2048 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2049 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2050 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2051 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2052 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2053 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2054 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2055 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2056 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2057 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2058 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2059 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2061 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2062 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2063 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2064 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
2065 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2066 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2067 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2068 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2069 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2071 # make this easy to change...
2072 scoansi|SCO Extended ANSI standard crt,
2077 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2078 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2079 # for the application keypad mode. We have added iris-ansi-ap rather than
2080 # change the original to keypad mode.
2082 # (iris-ansi: added rmam/smam based on init string -- esr)
2084 # This entry, and those derived from it, is used in xwsh (also known as
2085 # winterm). Some capabilities that do not fit into the terminfo model
2086 # include the shift- and control-functionkeys:
2088 # F1-F12 generate different codes when shift or control modifiers are used.
2092 # control-F1 \E[025q
2094 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2095 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2097 # The cursor keys also have different codes:
2098 # control-up \E[162q
2099 # control-down \E[165q
2100 # control-left \E[159q
2101 # control-right \E[168q
2104 # shift-down \E[164q
2105 # shift-left \E[158q
2106 # shift-right \E[167q
2108 # control-tab \[072q
2110 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2112 cols#80, it#8, lines#40,
2113 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2114 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2115 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2116 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2117 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2118 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2119 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2120 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2121 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2122 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2123 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2124 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2125 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2126 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2127 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2128 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2129 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2130 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2131 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2133 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2134 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2135 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2137 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2138 # (T.Dickey 98/1/24)
2139 iris-color|xwsh|IRIX ANSI with color,
2141 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2142 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2143 rmul=\E[24m, rs1=\Ec,
2144 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2145 sitm=\E[3m, use=vt100+enq, use=klone+color,
2148 #### OpenBSD consoles
2150 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2152 # The following terminal descriptions for the AMD/Intel PC console
2153 # were prepared based on information contained in the OpenBSD-4.9
2154 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2156 # Added bce based on testing with tack -TD
2157 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2158 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2160 pccon+keys|OpenBSD PC keyboard keys,
2161 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2162 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2163 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2164 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2165 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2167 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2168 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
2169 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
2170 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2171 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2172 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2173 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
2174 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2175 pccon+colors|ANSI colors for OpenBSD PC console,
2178 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2179 pccon+base|base capabilities for OpenBSD PC console,
2180 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2181 cols#80, it#8, lines#24,
2182 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
2183 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
2184 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2185 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2186 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2187 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
2188 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2189 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2190 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
2191 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2192 use=pccon0-m, use=pccon+colors,
2193 pccon-m|OpenBSD PC console without colors,
2194 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2195 pccon|OpenBSD PC console,
2196 use=pccon-m, use=pccon+colors,
2198 #### NetBSD consoles
2200 # pcvt termcap database entries (corresponding to release 3.31)
2201 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2203 # (For the terminfo master file, I translated these into terminfo syntax.
2204 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2205 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2206 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2208 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2209 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2210 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2211 pcvtXX|pcvt vt200 emulator (DEC VT220),
2212 am, km, mir, msgr, xenl,
2214 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
2215 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2216 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2217 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2218 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2219 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2220 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2221 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2222 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2223 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2224 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2225 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2226 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2227 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2228 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2229 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2230 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2231 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2232 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2233 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2235 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2236 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2237 # 50 lines entries; 80 columns
2238 pcvt25|dec vt220 emulation with 25 lines,
2240 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2241 pcvt28|dec vt220 emulation with 28 lines,
2243 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2244 pcvt35|dec vt220 emulation with 35 lines,
2246 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2247 pcvt40|dec vt220 emulation with 40 lines,
2249 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2250 pcvt43|dec vt220 emulation with 43 lines,
2252 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2253 pcvt50|dec vt220 emulation with 50 lines,
2255 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2257 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2258 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2259 # 50 lines entries; 132 columns
2260 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2262 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2263 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2265 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2266 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2268 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2269 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2271 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2272 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2274 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2275 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2277 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2279 # OpenBSD implements a color variation
2280 pcvt25-color|dec vt220 emulation with 25 lines and color,
2282 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2283 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2284 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2285 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2286 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2289 # Terminfo entries to enable the use of the ncurses library in colour on a
2290 # NetBSD-arm32 console (only tested on a RiscPC).
2291 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2292 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2293 # typo in invis - TD
2294 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2295 am, bce, msgr, xenl, xon,
2296 cols#80, it#8, lines#30,
2297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2298 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2299 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2300 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2301 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2302 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2303 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2304 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2305 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2306 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2307 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2308 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2309 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2310 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2311 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2313 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2314 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2315 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2318 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2319 cols#132, lines#50, use=arm100,
2321 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2322 # manufactured by Sharp for the Japenese market.
2323 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2324 x68k|x68k-ite|NetBSD/x68k ITE,
2326 kclr=\E[9~, khlp=\E[28~, use=vt220,
2329 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2331 # (still unfinished, but good enough so far.)
2332 ofcons|DNARD OpenFirmware console,
2335 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2336 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2337 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2338 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2339 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2340 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2341 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2342 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2343 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2344 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2345 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2346 rmso=\2330m, rmul=\2330m,
2347 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
2348 sgr0=\2330m, smso=\2337m, smul=\2334m,
2350 # NetBSD "wscons" emulator in vt220 mode.
2351 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2352 # The emulator renders underlined text in red. Colors are otherwise usable.
2354 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2355 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2356 # vt220 screens in vttest do not work with this emulator. For instance, it
2357 # identifies itself (primary DA response) as a vt220 with selective erase. But
2358 # the selective erase feature does not work. The secondary response is copied
2359 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2360 # the level of detail in a termcap, it is a passable emulator, since ECH does
2361 # work. Don't use it on a VMS system -TD
2362 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2364 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2365 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2366 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2367 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2368 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2369 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2370 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2372 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2375 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2377 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2378 # Initial testing set TERM=xterm, based on comments by developers, found too
2379 # many differences to continue in that path. However, test-results may be
2380 # useful to people curious about compatibility with xterm.
2382 # Testing with tack:
2384 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2385 # There is color-bleeding in the color-pairs screen.
2386 # Attributes do not work with color
2388 # Failed: kf1-kf4, kf13-kf48, khome, kend
2389 # (effectively xterm-r6 for function-keys)
2390 # None of the function or cursor key-modifiers are encoded.
2391 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2393 # Testing with vttest:
2394 # -------------------
2395 # Identifies as vt220 with selective erase
2396 # (however, selective erase refers to DECSCA, SPA)
2397 # Does not implement vt52
2398 # Uses spaces to simulate double-size characters
2399 # Does not support 8-bit controls
2400 # Does not support VT220 reports
2401 # Does not support send/receive mode
2402 # Supports ECH (like rxvt)
2403 # Does not support DECSCA
2404 # Does not support any of the ISO-6429 cursor-movement
2405 # Does not support any of the ISO-6429 miscellaneous tests
2406 # (SL/SR also leave unexpected char on screen too)
2407 # Background does not change in menu 11.6.9 (SGR 22-27)
2408 # None of the xterm special features tests work
2409 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2410 kbs=\177, use=wsvt25,
2412 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2414 rcons|BSD rasterconsole,
2416 # Color version of above. Color currently only provided by NetBSD.
2417 rcons-color|BSD rasterconsole with ANSI color,
2420 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2422 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2423 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2424 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2425 # -- compare with cons25w
2427 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2428 colors#8, cols#80, it#8, lines#18, pairs#64,
2429 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2430 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2431 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2432 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2433 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2434 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2435 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2436 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2437 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2438 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2439 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2440 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2441 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2442 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2443 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2444 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2446 #### FreeBSD console entries
2448 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2449 # Andrey Chernov maintains the FreeBSD termcap distributions.
2451 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2452 # or comment out the :cb: capability in the console entry.
2454 # Alexander Lukyanov reports:
2455 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2456 # Now el1 clears not only to the line beginning, but also a large chunk
2457 # of previous line. But there is another bug - ech does not work at all.
2461 # common entry without semigraphics
2462 # Bug: The <op> capability resets attributes.
2463 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2464 # instance el1 does if the cursor is moved to the right margin first. Removed
2465 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2467 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2468 # Note that this disables standout with color.
2470 # The emulator sends difference strings based on shift- and control-keys,
2472 # F13-F24 are shifted F1-F12
2473 # F25-F36 are control F1-F12
2474 # F37-F48 are shift+control F1-F12
2475 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2476 am, bce, bw, eo, msgr, npc,
2477 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2478 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2479 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2480 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2482 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2483 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2484 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2485 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2486 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2487 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2488 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2489 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2490 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2491 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2492 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2493 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2494 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2495 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2496 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2497 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2498 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2499 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2500 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2501 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2502 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2503 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2504 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2506 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2507 kbs=\177, kdch1=\E[3~, use=cons25,
2508 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2510 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2511 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2512 smul=\E[4m, use=cons25,
2513 cons30|ansi80x30|freebsd console (30-line ansi mode),
2514 lines#30, use=cons25,
2515 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2516 lines#30, use=cons25-m,
2517 cons43|ansi80x43|freebsd console (43-line ansi mode),
2518 lines#43, use=cons25,
2519 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2520 lines#43, use=cons25-m,
2521 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2522 lines#50, use=cons25,
2523 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2524 lines#50, use=cons25-m,
2525 cons60|ansi80x60|freebsd console (60-line ansi mode),
2526 lines#60, use=cons25,
2527 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2528 lines#60, use=cons25-m,
2529 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2530 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2532 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2534 op@, rmul=\E[m, setab@, setaf@,
2535 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2536 smul=\E[4m, use=cons25r,
2537 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2538 lines#50, use=cons25r,
2539 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2540 lines#50, use=cons25r-m,
2541 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2542 lines#60, use=cons25r,
2543 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2544 lines#60, use=cons25r-m,
2545 # ISO 8859-1 FreeBSD console
2546 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2547 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2549 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2551 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2552 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2553 smul=\E[4m, use=cons25l1,
2554 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2555 lines#50, use=cons25l1,
2556 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2557 lines#50, use=cons25l1-m,
2558 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2559 lines#60, use=cons25l1,
2560 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2561 lines#60, use=cons25l1-m,
2563 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2564 # which is intended to be xterm-compatible. See for example
2565 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2566 # in particular scterm-teken.c
2568 # For FreeBSD 9 and 10:
2569 # --------------------
2570 # The /etc/ttys entries for console and other ttys are all configured to set
2573 # Testing with tack:
2574 # There is no VT100 line-drawing (uses +'s and -'s)
2575 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2577 # Testing with vttest:
2578 # Menu 2 diamonds don't work, blink ditto, light background ditto
2579 # The terminal identifies itself as VT100 with AVO
2580 # There is no VT52 support
2581 # There is no doublesize character support
2582 # The terminal supports ECH (like rxvt)
2583 # The terminal does not support send/receive mode
2584 # The terminal supports all of the ISO-6429 cursor-movement
2585 # The terminal supports some of the ISO-6429 miscellaneous tests
2586 # (SL/SR also leave unexpected char on screen too)
2588 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2589 # the cells which happen to have ASCII control-character values:
2590 # - ^X arrow pointing up
2591 # . ^Y arrow pointing down
2595 # Those are removed from this entry's acsc string to avoid confusion.
2596 # The resulting description provides correct line-drawing and function-keys -TD
2597 teken|syscons with teken,
2599 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2600 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2601 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2602 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2603 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2604 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2605 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2606 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2607 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2609 #### 386BSD and BSD/OS Consoles
2612 # This was the original 386BSD console entry (I think).
2613 # Some places it's named oldpc3|oldibmpc3.
2614 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2615 origpc3|origibmpc3|IBM PC 386BSD Console,
2616 OTbs, am, bw, eo, xon,
2618 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2619 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2620 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2621 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2622 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2623 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2624 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2626 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2627 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2630 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2631 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2632 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2633 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2635 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2636 # Note, the emulator supports many of the additional console features
2637 # listed in the iBCS2 (e.g. character-set selection) though not all
2638 # are described here. This entry really ought to be upgraded.
2639 # Also note, the console will also work with fewer lines after doing
2640 # "stty rows NN", e.g. to use 24 lines.
2641 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2642 # Bug: The <op> capability resets attributes.
2643 bsdos-pc|IBM PC BSD/OS Console,
2644 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2645 use=bsdos-pc-nobold,
2647 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2648 use=klone+color, use=bsdos-pc-m,
2650 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2651 OTbs, am, eo, km, xon,
2652 cols#80, it#8, lines#25,
2653 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2654 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2655 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2656 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2657 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2658 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2659 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2660 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2663 # Old names for BSD/OS PC console used in releases before 4.1.
2664 pc3|BSD/OS on the PC Console,
2665 use=bsdos-pc-nobold,
2666 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2669 # BSD/OS on the SPARC
2670 bsdos-sparc|Sun SPARC BSD/OS Console,
2673 # BSD/OS on the PowerPC
2674 bsdos-ppc|PowerPC BSD/OS Console,
2679 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2681 # Actually (TD pointed this out at the time the acsc string was added):
2682 # vt52 shouldn't define full acsc since most of the cells don't match.
2683 # see vt100 manual page A-31. This is the list that does match:
2692 # The line-drawing happens to work in several terminal emulators, but should
2693 # not be used as a guide to the capabilities of the vt52. Note in particular
2694 # that vt52 does not support line-drawing characters (the scan-X values refer
2695 # to a crude plotting feature) -TD
2698 cols#80, it#8, lines#24,
2699 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2700 cub1=\ED, cud1=\EB, cuf1=\EC,
2701 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2702 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2703 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2705 #### DEC VT100 and compatibles
2707 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2708 # and micro consoles can be found in the `obsolete' section. More details on
2709 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2710 # found near the end of this file.
2712 # Except where noted, these entries are DEC's official terminfos.
2713 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2714 # Engineering for more information. Updated terminfos and termcaps
2715 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2717 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2718 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2719 # its name to Boundless Technologies; see http://www.boundless.com.
2722 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2723 # certainly includes what DEC called the `Level 1 editing extension' codes;
2724 # only the very oldest VT100s lacked these and there probably aren't any of
2725 # those left alive. To capture these, use one of the VT102 entries.
2727 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2728 # since the cursor is left in a different position while in the
2729 # weird state (concept at beginning of next line, vt100 at end
2730 # of this line) so all versions of vi before 3.7 don't handle
2731 # <xenl> right on vt100. The correct way to handle <xenl> is when
2732 # you output the char in column 80, immediately output CR LF
2733 # and then assume you are in column 1 of the next line. If <xenl>
2734 # is on, am should be on too.
2736 # I assume you have smooth scroll off or are at a slow enough baud
2737 # rate that it doesn't matter (1200? or less). Also this assumes
2738 # that you set auto-nl to "on", if you set it off use vt100-nam
2741 # The padding requirements listed here are guesses. It is strongly
2742 # recommended that xon/xoff be enabled, as this is assumed here.
2744 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2745 # tab settings are in non-volatile memory and don't need to be
2746 # reset upon login. Also setting the number of columns glitches
2747 # the screen annoyingly. You can type "reset" to get them set.
2749 # The VT100 series terminals have cursor ("arrows") keys which can operate
2750 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2751 # is the reset state, and is assumed to be the normal state. Application
2752 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2753 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2754 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2755 # was provided primarily as an aid to the porting of VT52 applications. It is
2756 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2757 # applications such as vi will always transmit the <smkx> string. Therefore,
2758 # the definitions for the cursor keys are made to match what the terminal
2759 # transmits after the <smkx> string is transmitted. If the <smkx> string
2760 # is a null string or is not defined, then cursor keys are assumed to be in
2761 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2762 # else the application may fail. It is also expected that applications will
2763 # always transmit the <rmkx> string to the terminal before they exit.
2765 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2766 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2767 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2768 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2769 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2770 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2771 # Enter key transmits the same as the Return key (Note: the Return key
2772 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2773 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2774 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2775 # is normally in Numeric Mode. If an application requires that the keypad be
2776 # in Application Mode then it is expected that the user, or the application,
2777 # will set the TERM environment variable to point to a terminfo entry which has
2778 # defined the <smkx> string to include the codes that switch the keypad into
2779 # Application Mode, and the terminfo entry will also define function key
2780 # fields to match the Application Mode control codes. If the <smkx> string
2781 # is a null string or is not defined, then the keypad is assumed to be in
2782 # Numeric Mode. If the <smkx> string switches the keypad into Application
2783 # Mode, it is expected that the <rmkx> string will contain the control codes
2784 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2785 # applications which transmit the <smkx> string will also always transmit the
2786 # <rmkx> string to the terminal before they exit.
2788 # Here's a diagram of the VT100 keypad keys with their bindings.
2789 # The top line is the name of the key (some DEC keyboards have the keys
2790 # labelled somewhat differently, like GOLD instead of PF1, but this is
2791 # the most "official" name). The second line is the escape sequence it
2792 # generates in Application Keypad mode (where "$" means the ESC
2793 # character). The third line contains two items, first the mapping of
2794 # the key in terminfo, and then in termcap.
2795 # _______________________________________
2796 # | PF1 | PF2 | PF3 | PF4 |
2797 # | $OP | $OQ | $OR | $OS |
2798 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2800 # | $Ow | $Ox | $Oy | $Om |
2801 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2803 # | $Ot | $Ou | $Ov | $Ol |
2804 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2806 # | $Oq | $Or | $Os | enter |
2807 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2810 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2812 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2813 # terminfo guidelines. That is a compromise used to assign the remaining
2814 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2816 vt100+keypad|dec vt100 numeric keypad no fkeys,
2817 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2818 vt100+pfkeys|dec vt100 numeric keypad,
2819 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2821 vt100+fnkeys|dec vt100 numeric keypad,
2822 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2823 kf9=\EOw, use=vt100+pfkeys,
2825 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2826 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2827 # use the 5-key arrangement to model the arrow keys as suggested in the
2828 # terminfo guidelines:
2829 # _______________________________________
2830 # | PF1 | PF2 | PF3 | PF4 |
2831 # | $OP | $OQ | $OR | $OS |
2832 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2834 # | $Ow | $Ox | $Oy | $Om |
2835 # |_ka1__K1_|_________|_ka3__K3_|_________|
2837 # | $Ot | $Ou | $Ov | $Ol |
2838 # |_________|_kb2__K2_|_________|_________|
2840 # | $Oq | $Or | $Os | enter |
2841 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2844 # |___________________|_________|_kent_@8_|
2846 vt220+keypad|dec vt220 numeric keypad,
2847 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2848 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2851 vt100+enq|ncurses extension for vt100-style ENQ,
2852 u8=\E[?1;2c, use=ansi+enq,
2853 vt102+enq|ncurses extension for vt102-style ENQ,
2854 u8=\E[?6c, use=ansi+enq,
2856 # And here, for those of you with orphaned VT100s lacking documentation, is
2857 # a description of the soft switches invoked when you do `Set Up'.
2859 # Scroll 0-Jump Shifted 3 0-#
2860 # | 1-Smooth | 1-British pound sign
2861 # | Autorepeat 0-Off | Wrap Around 0-Off
2863 # | | Screen 0-Dark Bkg | | New Line 0-Off
2864 # | | | 1-Light Bkg | | | 1-On
2865 # | | | Cursor 0-Underline | | | Interlace 0-Off
2866 # | | | | 1-Block | | | | 1-On
2868 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2870 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2871 # | | | 1-On | | | 1-50 Hz
2872 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2873 # | | 1-ANSI | | 1-8 Bits
2874 # | Keyclick 0-Off | Parity 0-Off
2876 # Margin Bell 0-Off Parity Sense 0-Odd
2879 # The following SET-UP modes are assumed for normal operation:
2880 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2881 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2882 # Other SET-UP modes may be set for operator convenience or communication
2883 # requirements; I recommend
2884 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2885 # Unless you have a graphics add-on such as Digital Engineering's VT640
2886 # (and even then, whenever it can be arranged!) you should set
2889 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2890 vt100|vt100-am|dec vt100 (w/advanced video),
2891 OTbs, am, mc5i, msgr, xenl, xon,
2892 cols#80, it#8, lines#24, vt#3,
2893 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2894 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2895 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2896 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2897 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2898 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2899 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2900 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2901 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2902 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2903 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2904 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2905 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2906 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2907 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2908 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2910 vt100nam|vt100-nam|vt100 no automargins,
2911 am@, xenl@, use=vt100-am,
2912 vt100-vb|dec vt100 (w/advanced video) & no beep,
2913 bel@, flash=\E[?5h\E[?5l, use=vt100,
2915 # Ordinary vt100 in 132 column ("wide") mode.
2916 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2918 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2919 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2920 cols#132, lines#14, vt@,
2921 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2923 # vt100 with no advanced video.
2924 vt100-nav|vt100 without advanced video option,
2926 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2928 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2929 cols#132, lines#14, use=vt100-nav,
2931 # vt100 with one of the 24 lines used as a status line.
2932 # We put the status line on the top.
2933 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2936 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2937 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2938 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2939 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2941 # Status line at bottom.
2942 # Clearing the screen will clobber status line.
2943 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2946 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2947 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2949 # Most of the `vt100' emulators out there actually emulate a vt102
2950 # This entry (or vt102-nsgr) is probably the right thing to use for
2953 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2955 vt102-w|dec vt102 in wide mode,
2957 rs3=\E[?3h, use=vt102,
2959 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2960 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2961 # string in the canonical vt100 entry above leaves the screen littered
2962 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2963 # after highlight turnoffs. This entry should fix that, and even leave
2964 # ACS support working, at the cost of making multiple-highlight changes
2965 # slightly more expensive.
2966 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2967 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2968 sgr@, sgr0=\E[m, use=vt102,
2970 # VT125 Graphics CRT. Clear screen also erases graphics
2971 # Some vt125's came configured with vt102 support.
2972 vt125|vt125 graphics terminal,
2974 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2976 # This isn't a DEC entry, it came from University of Wisconsin.
2977 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2980 cols#80, it#8, lines#24, vt#3,
2981 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2982 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2983 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2984 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2985 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2986 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2987 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2988 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2989 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2991 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2992 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2993 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2995 # vt132 - like vt100 but slower and has ins/del line and such.
2996 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2997 # manual and from the ANSI standard, this describes the actual
2998 # terminal. I've never actually used a vt132 myself, so this
3003 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3004 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3006 # This vt220 description maps F5--F9 to the second block of function keys
3007 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3008 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3009 # PF1--PF4 are used as F1--F4.
3012 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3013 OTbs, OTpt, am, mir, msgr, xenl, xon,
3014 cols#80, lines#24, vt#3,
3016 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3017 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3018 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3019 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3020 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3021 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3022 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3023 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3024 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3025 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3026 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3027 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3028 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3029 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3030 rmso=\E[27m, rmul=\E[24m,
3031 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3032 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3033 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3034 smso=\E[7m, smul=\E[4m,
3036 # A much better description of the VT200/220; used to be vt220-8
3037 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3038 # designation to accommodate bug in pcvt -TD
3040 # Here's a picture of the VT220 editing keypad:
3041 # +--------+--------+--------+
3042 # | Find | Insert | Remove |
3043 # +--------+--------+--------+
3044 # | Select | Prev | Next |
3045 # +--------+--------+--------+
3046 vt220|vt200|dec vt220,
3047 OTbs, am, mir, msgr, xenl, xon,
3048 cols#80, it#8, lines#24, vt#3,
3049 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3050 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3051 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3052 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3053 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3054 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3055 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3056 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3057 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3058 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3059 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3060 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3061 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3062 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3063 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3064 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3065 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3066 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3067 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3068 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3070 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3071 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3072 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3074 vt220-w|vt200-w|DEC vt220 in wide mode,
3076 rs3=\E[?3h, use=vt220,
3077 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3078 OTbs, am, mc5i, mir, msgr, xenl, xon,
3079 cols#80, it#8, lines#24, vt#3,
3080 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3081 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3082 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3083 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3084 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3085 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3086 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3087 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3088 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3089 il=\233%p1%dL, il1=\233L, ind=\ED,
3090 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3091 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3092 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3093 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3094 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3095 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3096 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3097 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3098 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3099 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3100 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3101 rmul=\23324m, rs1=\233?3l, sc=\E7,
3102 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3103 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3104 smso=\2337m, smul=\2334m, tbc=\2333g,
3107 # This vt220 description regards F6--F10 as the second block of function keys
3108 # at the top of the keyboard. This mapping follows the description given
3109 # in the VT220 Programmer Reference Manual and agrees with the labeling
3110 # on some terminals that emulate the vt220. There is no support for an F5.
3111 # See vt220 for an alternate mapping.
3113 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3114 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3115 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3116 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3117 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3119 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3121 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3123 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3124 # (not an official DEC entry!)
3125 # The problem with real vt220 terminals is they don't send escapes when in
3126 # in vt220 mode. This can be gotten around two ways. 1> don't send
3127 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3128 # features of vt100 advanced video which it then has.
3130 # This entry takes the view of putting a vt220 into vt100 mode so
3131 # you can use the escape key in emacs and everything else which needs it.
3133 # You probably don't want to use this on a VMS machine since VMS will think
3134 # it has a vt220 and will get fouled up coming out of emacs
3136 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3137 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3139 vt200-js|vt220-js|dec vt200 series with jump scroll,
3142 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3143 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3144 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3145 ht=^I, il1=\E[L, ind=\ED,
3146 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
3147 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3148 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3149 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3150 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3151 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3152 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3154 # This was DEC's vt320. Use the purpose-built one below instead
3155 #vt320|DEC VT320 in vt100 emulation mode,
3158 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3160 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3162 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3164 # These entries are not DEC's official ones, they were purpose-built for the
3165 # VT320. Here are the designer's notes:
3166 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3167 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3168 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3169 # Things that use <knxt> usually use tab anyways... and things that don't use
3170 # tab usually use <knxt> instead...
3171 # kprv is same as tab - Backtab is useless...
3172 # I left out <sgr> because of its RIDICULOUS complexity,
3173 # and the resulting fact that it causes the termcap translation of the entry
3174 # to SMASH the 1k-barrier...
3175 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3176 # (vt320: uncommented <fsl> --esr)
3177 vt320|vt300|dec vt320 7 bit terminal,
3178 am, hs, mir, msgr, xenl,
3179 cols#80, lines#24, wsl#80,
3180 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3181 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3182 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3183 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3184 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3185 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3186 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3187 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3188 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3189 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3190 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3191 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3192 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3193 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3194 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3195 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3196 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3197 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3198 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3200 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3202 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3203 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3204 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3205 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3206 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3208 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3209 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3211 # We have to init 132-col mode, not 80-col mode.
3212 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3214 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3215 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3217 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3219 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3220 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3223 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3224 # which are pretty much a superset of the VT320. They have the
3225 # host writable status line, yet another different DRCS matrix size,
3226 # and such, but they add the DEC Technical character set, Multiple text
3227 # pages, selectable length pages, and the like. The difference between
3228 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3229 # monitor, the former has 4 planes and a color monitor. These terminals
3230 # support VT131 and ANSI block mode, but as with much of these things,
3231 # termcap/terminfo doesn't deal with these features.
3233 # Note that this entry is are set up in what was the standard way for GNU
3234 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3235 # keys were switched into application mode at the same time the numeric pad
3236 # is switched into application mode. This changes the definitions of the
3237 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3238 # your termcap or terminfo entry,
3240 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3241 # (vt340: string capability "sb=\E[M" corrected to "sr";
3242 # also, added <rmam>/<smam> based on the init string -- esr)
3243 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3244 am, eslok, hs, mir, msgr, xenl, xon,
3245 cols#80, it#8, lines#24, vt#3,
3246 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3247 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3248 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3249 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3250 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3251 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3252 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3253 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3254 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3256 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3257 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3258 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3259 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3260 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3261 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3262 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3263 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3264 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3265 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3266 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3267 tsl=\E[2$~\E[1$}\E[1;%dH,
3269 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3270 # (originally written with vt420 as its primary name, and usable for it).
3272 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3273 # text pages and long text pages with selectable length of the vt340, along
3274 # with left and right margins, rectangular area text copy, fill, and erase
3275 # operations, selected region character attribute change operations,
3276 # page memory and rectangle checksums, insert/delete column, reception
3277 # macros, and other features too numerous to remember right now. TERMCAP
3278 # can only take advantage of a few of these added features.
3280 # Note that this entry is are set up in what was the standard way for GNU
3281 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3282 # keys were switched into application mode at the same time the numeric pad
3283 # is switched into application mode. This changes the definitions of the
3284 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3285 # your termcap entry,
3287 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3288 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3289 # also, added <rmam>/<smam> based on the init string -- esr)
3290 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3291 am, eslok, hs, mir, msgr, xenl, xon,
3292 cols#80, it#8, lines#24, vt#3,
3293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3294 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3295 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3296 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3297 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3298 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3299 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3300 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3301 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3302 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3303 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3304 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3305 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3306 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3307 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3308 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3309 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3310 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3311 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3312 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3313 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3314 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3315 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3317 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3318 # a missing <sc> -- esr)
3319 # add msgr and other capabilities from vt220 -TD
3321 am, mir, msgr, xenl, xon,
3322 cols#80, it#8, lines#24, vt#3,
3323 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3324 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3325 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3326 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3327 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3328 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3329 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3330 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3331 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3332 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3333 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3334 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3335 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3336 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3337 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3338 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3339 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3340 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3341 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3342 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3343 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3344 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3345 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3346 use=ansi+pp, use=dec+sl, use=ansi+enq,
3348 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3349 # takes two parameters, the key and the string. Translating the key is
3350 # straightforward (keys 1-5 are not defined on real terminals, though some
3351 # emulators define these):
3353 # if (key < 16) then value = key;
3354 # else if (key < 21) then value = key + 1;
3355 # else if (key < 25) then value = key + 2;
3356 # else if (key < 27) then value = key + 3;
3357 # else if (key < 30) then value = key + 4;
3358 # else value = key + 5;
3360 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3361 # There's no provision in terminfo for emitting a string in this format, so the
3362 # application has to know it.
3364 vt420pc|DEC VT420 w/PC keyboard,
3365 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
3366 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
3367 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
3368 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
3369 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3370 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
3371 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
3372 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
3373 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
3374 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
3375 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
3376 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
3377 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3378 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3379 pctrm=USR_TERM\:vt420pcdos\:,
3380 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
3383 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3385 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
3387 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3388 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3390 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3391 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3392 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3393 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3394 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3395 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3396 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3401 vt510pc|DEC VT510 w/PC keyboard,
3403 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3408 # The VT520 is a monochrome text terminal capable of managing up to
3409 # four independent sessions in the terminal. It has multiple ANSI
3410 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3411 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3412 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3414 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3415 # [Alt]/[Print Screen] depending upon which keyboard and which
3416 # terminal mode is being used. If Set-Up has been disabled or
3417 # assigned to an unknown key, Set-Up may be entered by pressing
3418 # [F3] as the first key after power up, regardless of keyboard type.
3420 use=ansi+rca, use=vt420, use=ansi+tabs,
3425 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3426 # Keyboard, which replaces the old LK41R-AA keyboard.
3428 # In trying to get the function keys to work, I had to cobble my own
3429 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3430 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3431 # I seem to get them all -Mike Gran
3432 vt520ansi|Boundless VT520 ANSI,
3433 use=ansi+rca, use=vt420f, use=vt220+keypad,
3436 #### VT100 emulations
3439 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3440 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3441 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3442 # that this works best with a stock vt100 entry.
3443 dec-vt100|EWAN telnet's vt100 emulation,
3446 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3447 dec-vt220|DOS tnvt200 terminal emulator,
3450 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3451 # anyone who needs PC VT340 emulation. (or anything below that level, for
3452 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3453 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3454 # I can send the address if requested.
3455 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3456 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3457 z340|zstem vt340 terminal emulator 132col 42line,
3459 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3460 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3462 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3464 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3465 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3468 # CRT is shareware. It implements some xterm features, including mouse.
3469 crt|crt-vt220|CRT 2.3 emulating VT220,
3472 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3474 # PuTTY 0.55 (released 3 August 2004)
3475 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3477 # Comparing with 0.51, vttest is much better (only a few problems with the
3478 # cursor position reports and wrapping).
3480 # PuTTY 0.51 (released 14 December 2000)
3482 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3483 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3484 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3485 # to xterm, which is incorrect, since several features are misimplemented:
3487 # Alt+key always sends ESC+key, so 'km' capability is removed.
3489 # Control responses, wrapping and tabs are buggy, failing a couple of
3490 # screens in vttest.
3492 # xterm mouse support is not implemented (unrelease version may).
3494 # Several features such as backspace/delete are optional; this entry documents
3495 # the default behavior -TD
3497 putty|PuTTY terminal emulator,
3498 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3499 colors#8, it#8, ncv#22, pairs#64, U8#1,
3500 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3501 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3502 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3503 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3504 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3505 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3506 dch=\E[%p1%dP, dch1=\E[P,
3507 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
3508 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3509 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
3510 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3511 ind=^J, indn=\E[%p1%dS,
3512 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
3513 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3514 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
3515 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
3516 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3517 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3518 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3519 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3520 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3521 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3522 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3523 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3524 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
3525 rmso=\E[27m, rmul=\E[24m,
3526 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3527 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3528 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3529 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3530 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3531 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
3532 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq,
3534 vt100-putty|Reset PuTTY to pure vt100,
3535 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3537 # palette is hardcoded...
3538 putty-256color|PuTTY 0.58 with xterm 256-colors,
3539 use=xterm+256setaf, use=putty,
3541 # One of the keyboard selections is "VT100+".
3542 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3543 putty-vt100|VT100+ keyboard layout,
3544 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3545 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3546 kf9=\EOX, use=putty,
3548 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3550 # Use modifiers to obtain function keys past 12:
3553 # F25-F36 - control/alt
3554 # F37-F48 - control/shift
3556 putty-sco|putty with SCO function keys,
3557 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3558 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3559 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3560 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3561 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3562 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3563 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3564 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3565 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3566 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3567 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3568 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3570 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3571 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3572 # (communication program) which supports:
3574 # - Serial port connections.
3575 # - TCP/IP (telnet) connections.
3576 # - VT100 emulation, and selected VT200/300 emulation.
3577 # - TEK4010 emulation.
3578 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3580 # - Scripts using the "Tera Term Language".
3581 # - Japanese and Russian character sets.
3583 # The program does not come with terminfo or termcap entries. However, the
3584 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3585 # vt52 or doublesize character support; blinking is done with color). Besides
3586 # the HPA, VPA extensions it also implements CPL and CNL.
3588 # All of the function keys can be remapped. This description shows the default
3589 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3590 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3591 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3599 # ANSI colors are implemented, but cannot be combined with video attributes
3600 # except for reverse.
3602 # No fonts are supplied with the program, so the acsc string is chosen to
3603 # correspond with the default Microsoft terminal font.
3605 # Tera Term recognizes some xterm sequences, including those for setting and
3606 # retrieving the window title, and for setting the window size (i.e., using
3607 # "resize -s"), though it does not pass SIGWINCH to the application if the
3608 # user resizes the window with the mouse.
3609 teraterm2.3|Tera Term Pro,
3612 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3613 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3614 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3615 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3616 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3617 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3618 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3619 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3620 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3621 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3622 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3623 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3624 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3625 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3626 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3627 use=klone+color, use=vt100,
3629 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3630 # to choose a Windows OEM font).
3632 # Testing with tack:
3633 # - it does not have xenl (suppress that)
3634 # - underline seems to work with color (modify ncv).
3635 # Testing with vttest:
3636 # - wrapping differs from vt100 (menu 1).
3637 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3639 # - it recognizes the dtterm window controls for reporting size in
3640 # characters and pixels.
3641 # - it passes SIGWINCH.
3642 teraterm4.59|Tera Term Pro,
3645 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3646 kmous=\E[M, use=teraterm2.3,
3651 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3652 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3655 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3656 # for casual (occasional) use. Also fails several of the vttest screens,
3657 # but that is not unusual for vt100 "emulators".
3658 # b) Does not implement vt100 keypad
3659 # c) Recognizes a subset of vt52 controls.
3660 ms-vt100|MS telnet imitating dec vt100,
3662 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3663 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3664 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3666 # Tested with Windows 2000, the telnet application runs in a console window,
3667 # also using 'Terminal' font.
3670 # a) This version has no function keys or numeric keypad. Unlike the older
3671 # version, the numeric keypad is entirely ignored.
3672 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3673 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3675 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3678 # Based on comments from Federico Bianchi:
3680 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3681 # scheme for PF keys.
3683 # and PuTTY wishlist:
3685 # The modifiers are represented as the codes listed above, prefixed to
3686 # the normal sequences. If the modifier is pressed alone, its sequence
3687 # is transmitted twice in succession. If multiple modifiers apply,
3688 # they're transmitted in the order shift, control, alt.
3693 ms-vt100+|vt100+|windows XP vt100+ (sic),
3694 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3695 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3696 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3697 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3698 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3699 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3700 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3701 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3702 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3703 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3704 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3705 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3706 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3707 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3708 knp=\E/, kpp=\E?, use=ms-vt100-color,
3710 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3713 # expect-5.44.1.15/example/tkterm
3714 # a minimal subset of a vt100 (compare with "news-unk).
3716 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3717 tt|tkterm|Don Libes' tk text widget terminal emulator,
3718 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3719 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3720 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3721 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3724 ######## X TERMINAL EMULATORS
3727 # You can add the following line to your .Xdefaults to change the terminal type
3728 # set by the xterms you start up to my-xterm:
3730 # *termName: my-xterm
3732 # System administrators can change the default entry for xterm instances
3733 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3734 # case, xterm will detect and reject an invalid terminal type, falling back
3735 # to the default of xterm.
3738 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3739 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3740 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3741 # as these seem not to work -- esr)
3742 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3743 OTbs, am, km, mir, msgr, xenl, xon,
3744 cols#80, it#8, lines#65,
3745 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3746 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3747 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3748 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3749 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3750 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3751 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3752 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3753 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3754 smso=\E[7m, smul=\E[4m,
3755 # Compatible with the R5 xterm
3756 # (from the XFree86 3.2 distribution, <blink=@> removed)
3757 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3758 # corrected typos in rs2 string - TD
3760 xterm-r5|xterm R5 version,
3761 OTbs, am, km, msgr, xenl,
3762 cols#80, it#8, lines#24,
3763 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3764 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3765 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3766 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3767 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3768 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3769 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3770 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3771 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3772 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3773 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3774 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3775 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3776 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3778 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3780 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3781 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3782 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3783 # Compatible with the R6 xterm
3784 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3785 # added khome/kend, hts based on the R6 xterm code - TD
3786 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3787 # for compatibility with other emulators).
3788 xterm-r6|xterm X11R6 version,
3789 OTbs, am, km, mir, msgr, xenl,
3790 cols#80, it#8, lines#24,
3791 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3792 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3793 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3794 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3795 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3796 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3797 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3799 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3800 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3801 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3802 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3803 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3804 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3805 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3806 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3807 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3808 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3809 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3810 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3811 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3812 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3814 xterm-old|antique xterm version,
3816 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3817 # The name has been changed and some aliases have been removed.
3818 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3819 OTbs, am, bce, km, mir, msgr, xenl, XT,
3820 cols#80, it#8, lines#24, ncv@,
3821 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3822 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3823 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3824 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3825 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3826 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3827 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3828 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3829 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3830 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3832 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3833 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3834 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3835 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3836 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3837 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3838 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3839 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3840 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3841 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3842 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3843 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3844 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3845 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3846 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3847 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3848 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3849 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3850 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3851 use=ecma+color, use=vt220+keypad,
3853 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3854 # codes for F1-F4 except while in VT220 mode.
3855 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3856 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3858 # This version was released in XFree86 3.3.3 (November 1998).
3859 # Besides providing printer support, it exploits a new feature that allows
3860 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3861 # -- the distribution contained incorrect khome/kend values -TD
3862 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3863 blink=\E[5m, ich1@, invis=\E[8m,
3864 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3865 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3866 rs2=\E[!p\E[?3;4l\E[4l\E>,
3867 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3868 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3871 # This version was released in XFree86 4.0.
3872 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3874 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3875 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3876 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3877 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3878 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3879 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3880 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3881 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3882 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3883 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3884 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3885 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3886 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3887 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3888 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3889 smcup=\E[?1049h, use=xterm-xf86-v333,
3891 # This version was released in XFree86 4.3.
3892 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3893 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3894 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3896 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3899 # This version was released in XFree86 4.4.
3900 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3901 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3902 rin=\E[%p1%dT, use=xterm-xf86-v43,
3904 xterm-xfree86|xterm terminal emulator (XFree86),
3907 # This version reflects the current xterm features.
3908 xterm-new|modern xterm terminal emulator,
3910 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3911 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3914 # This fragment is for people who cannot agree on what the backspace key
3916 xterm+kbs|fragment for backspace key,
3919 # This fragment describes as much of XFree86 xterm's "pc-style" function
3920 # keys as will fit into terminfo's 60 function keys.
3923 # ---------------------------------
3930 # 8 Shift + Alt + Control
3931 # ---------------------------------
3932 # The meta key may also be used as a modifier in this scheme, adding another
3933 # bit to the parameter.
3934 xterm+pcfkeys|fragment for PC-style fkeys,
3935 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3938 xterm+noapp|fragment with cursor keys in normal mode,
3939 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3942 xterm+app|fragment with cursor keys in application mode,
3943 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3946 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3947 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3948 # the earlier scheme, as noted in the "use=" clauses in this file.
3950 # The original assignments from patch #94 for cursor-keys had some technical
3953 # A parameter for a function-key to represent a modifier is just more
3954 # bits. But for a cursor-key it may change the behavior of the
3955 # application. For instance, emacs decodes the first parameter of a
3956 # cursor-key as a repeat count.
3958 # A parameterized string should (really) not begin with SS3 (\EO).
3959 # Rather, CSI (\E[) should be used.
3961 # For these reasons, the original assignments were deprecated. For
3962 # compatibility reasons, they are still available as a setting of xterm's
3963 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3964 # that might apply to xterm+pcfkeys with different values of that resource.
3965 xterm+pcc3|fragment with modifyCursorKeys:3,
3966 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3967 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3968 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3969 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3970 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3971 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3972 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3973 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3976 xterm+pcc2|fragment with modifyCursorKeys:2,
3977 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3978 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3979 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3980 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3981 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3982 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3983 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3985 xterm+pcc1|fragment with modifyCursorKeys:1,
3986 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3987 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3988 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3989 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3990 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3991 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3993 xterm+pcc0|fragment with modifyCursorKeys:0,
3994 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3995 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3996 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3997 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3998 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3999 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4002 # Here are corresponding fragments from xterm patch #216:
4004 xterm+pcf0|fragment with modifyFunctionKeys:0,
4005 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4006 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4007 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4008 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4009 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4010 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4011 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4012 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4013 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4014 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4015 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4016 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4017 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4018 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4019 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4020 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4021 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4023 xterm+pcf2|fragment with modifyFunctionKeys:2,
4024 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4025 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4026 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4027 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4028 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4029 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4030 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4031 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4032 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4033 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4034 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4035 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4036 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4037 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4038 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4039 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4040 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4041 kf8=\E[19~, kf9=\E[20~,
4043 # Chunks from xterm #230:
4044 xterm+pce2|fragment with modifyCursorKeys:2,
4045 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4046 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4047 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4048 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4049 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4050 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4051 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4052 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4053 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4054 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4055 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4058 xterm+edit|fragment for 6-key editing-keypad,
4059 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4062 xterm+pc+edit|fragment for pc-style editing keypad,
4063 kend=\E[4~, khome=\E[1~,
4065 xterm+vt+edit|fragment for vt220-style editing keypad,
4066 kfnd=\E[1~, kslt=\E[4~,
4069 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4070 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4071 # is shown here (because that is used in mrxvt and mlterm):
4072 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4073 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4074 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4075 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4076 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4077 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4078 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4079 kf63=\E[13;4~, use=xterm+pcf2,
4081 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4082 xterm-basic|modern xterm terminal emulator - common,
4083 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4084 colors#8, cols#80, it#8, lines#24, pairs#64,
4085 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4086 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4087 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
4088 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4089 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4090 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4091 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4092 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4093 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4094 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4095 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
4096 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4097 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4098 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4099 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4100 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4101 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4102 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4103 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4104 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4105 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4106 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4107 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4108 vpa=\E[%i%p1%dd, E3=\E[3;J, use=ansi+pp, use=xterm+kbs,
4111 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4112 # In retrospect, something like xterm-r6 was intended here -TD
4113 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4114 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4116 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
4117 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4118 # xterm also recognizes the control sequences for initc -TD
4119 xterm-16color|xterm with 16 colors like aixterm,
4121 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4122 use=ibm+16color, use=xterm-new,
4124 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4125 # patch #111 (1999/7/10) -TD
4126 xterm+256color|xterm 256-color feature,
4128 colors#256, pairs#32767,
4129 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4130 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4131 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4134 xterm+256setaf|xterm 256-color (set-only),
4136 colors#256, pairs#32767,
4138 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4139 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4142 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4143 # patch #115 (1999/9/18) -TD
4145 # Note that the escape sequences used are the same as for 256-colors - xterm
4146 # has a different table of default color resource values. If built for
4147 # 256-colors, it can still handle an 88-color palette by using the initc
4150 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4151 # which support the xterm+256color feature support the associated initc
4152 # capability. So it is cancelled in the entries which use this and/or the
4153 # xterm+256color block.
4155 # The default color palette for the 256- and 88-colors are different. A
4156 # given executable will have one palette (perhaps compiled-in). If the program
4157 # supports xterm's control sequence, it can be programmed using initc.
4158 xterm+88color|xterm 88-color feature,
4159 colors#88, pairs#7744, use=xterm+256color,
4161 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4162 xterm-256color|xterm with 256 colors,
4163 use=xterm+256color, use=xterm-new,
4164 xterm-88color|xterm with 88 colors,
4165 use=xterm+88color, use=xterm-256color,
4167 # These two are used to demonstrate the any-event mouse support, i.e., by
4168 # using an extended name "XM" which tells ncurses to put the terminal into
4169 # a special mode when initializing the xterm mouse.
4170 xterm+sm+1002|testing xterm-mouse,
4171 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
4172 xterm+sm+1003|testing xterm-mouse,
4173 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
4175 xterm-1002|testing xterm-mouse,
4176 use=xterm+sm+1002, use=xterm-new,
4177 xterm-1003|testing xterm-mouse,
4178 use=xterm+sm+1003, use=xterm-new,
4180 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4181 # asked for some of xterm's advanced features to be added to its terminfo
4182 # entry. It defines extended capabilities not found in standard terminfo or
4183 # termcap. These are useful in tmux, for instance, hence the name.
4185 # One caveat in adding extended capabilities in ncurses is that if the names
4186 # are longer than two characters, then they will not be visible through the
4187 # termcap interface.
4189 # Ms modifies the selection/clipboard. Its parameters are
4190 # p1 = the storage unit (clipboard, selection or cut buffer)
4191 # p2 = the base64-encoded clipboard content.
4193 # Ss is used to set the cursor style as described by the DECSCUSR
4194 # function to a block or underline.
4195 # Se resets the cursor style to the terminal power-on default.
4197 # Cs and Cr set and reset the cursor colour.
4198 xterm+tmux|advanced xterm features used in tmux,
4199 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4200 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4202 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4203 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4204 # To use it, your decTerminalID resource must be set to 200 or above.
4211 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4212 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4213 colors#8, cols#80, it#8, lines#24, pairs#64,
4214 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4215 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4216 civis=\233?25l, clear=\233H\2332J,
4217 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
4218 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
4219 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4220 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4221 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4222 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4223 flash=\233?5h$<100/>\233?5l, home=\233H,
4224 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4225 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
4226 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4227 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4228 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4229 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4230 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4231 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4232 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4233 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4234 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4235 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4236 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4237 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4238 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4239 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4241 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4242 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4243 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4244 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4245 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4246 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4247 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4248 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4249 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4252 xterm-hp|xterm with hpterm function keys,
4253 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4254 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4255 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4256 knp=\ES, kpp=\ET, use=xterm-basic,
4258 xterm-sco|xterm with SCO function keys,
4259 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4260 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4261 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4262 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4263 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4264 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4265 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4266 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4267 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4268 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4269 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4270 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4273 # The xterm-new description has all of the features, but is not completely
4274 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4275 # sunKeyboard resource to true:
4276 # + maps the editing keypad
4277 # + interprets control-function-key as a second array of keys, so a
4278 # 12-fkey keyboard can support vt220's 20-fkeys.
4279 # + maps numeric keypad "+" to ",".
4280 # + uses DEC-style control sequences for the application keypad.
4282 xterm-vt220|xterm emulating vt220,
4283 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4284 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4285 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4286 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4287 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4288 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4289 use=xterm+app, use=xterm+edit, use=xterm-basic,
4292 xterm-vt52|xterm emulating dec vt52,
4293 cols#80, it#8, lines#24,
4294 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4295 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
4296 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4297 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4298 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
4301 xterm-noapp|xterm with cursor keys in normal mode,
4302 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4305 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4306 lines#24, use=xterm-old,
4308 # This is xterm for ncurses.
4309 xterm|xterm terminal emulator (X Window System),
4312 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4313 # setting the vt100Graphics resource to false.
4314 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4317 # These building-blocks allow access to the X titlebar and icon name as a
4318 # status line. There are a few problems in using them in entries:
4320 # a) tsl should have a parameter to denote the column on which to transfer to
4322 # b) the "0" code for xterm updates both icon-title and window title. Some
4323 # window managers such as twm (and possibly window managers descended from
4324 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4325 # don't want to mess with icon-name when using those window managers.
4327 # The extension "TS" is preferable, because it does not accept a parameter.
4328 # However, if you are using a non-extended terminfo, "TS" is not visible.
4329 xterm+sl|access X title line and icon name,
4331 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4332 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4334 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4336 # In contrast, this block can be used for a DEC vt320 and up. There are two
4339 # DECSASD (select active status display)
4340 # \E[0$} Main display
4341 # \E[1$} Status line
4343 # DECSSDT (select status line type)
4344 # \E[0$~ No status line
4345 # \E[1$~ Indicator status line
4346 # \E[2$~ Host-writable status line
4348 # The building block assumes that the terminal always shows something at the
4349 # status line (either the indicator, or status line). That is because if no
4350 # status line is used, then the terminal makes that line part of the user
4351 # window, changing its size without notice.
4353 # Because there is no "esl" (enable status line) capability, the "tsl"
4354 # capability ensures that the status line is host-writable. A DEC terminal
4355 # will clear the status line when changing from indicator to host-writable
4358 # Once on the status line, the row part of cursor addressing is ignored. Since
4359 # tsl expects a parameter (to specify the column), the shortest addressing that
4360 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4362 dec+sl|DEC VTxx status line,
4364 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4367 # The following xterm variants don't depend on your base version
4369 # xterm with bold instead of underline
4370 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4371 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
4372 smso=\E[7m, smul=\E[1m, use=xterm-old,
4374 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4375 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4376 ich@, ich1@, use=xterm,
4377 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4378 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4379 rmcup@, smcup@, use=xterm,
4382 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4383 # (kterm should not invoke DEC Graphics as the alternate character set
4384 # -- Kenji Rikitake)
4385 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4386 # -- MATSUMOTO Shoji)
4387 # kterm implements acsc via built-in table of X Drawable's
4388 kterm|kterm kanji terminal emulator (X window system),
4391 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4392 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4393 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4394 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4395 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4396 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4397 kterm-color|kterm-co|kterm with ANSI colors,
4398 ncv@, use=kterm, use=ecma+color,
4401 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4402 # variant of xterm which is apparently no longer supported, but are interesting
4403 # because they illustrate SVr4 curses mouse controls - T.Dickey
4404 xtermm|xterm terminal emulator (monocrome),
4405 OTbs, am, km, mir, msgr, xenl,
4406 btns#3, cols#80, it#8, lines#24,
4407 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4408 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4409 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4410 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4411 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4412 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4413 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4414 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4415 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4416 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4417 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4418 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4419 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4420 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4421 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4422 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4423 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4424 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4425 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4427 xtermc|xterm terminal emulator (color),
4428 colors#8, ncv#7, pairs#64,
4429 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4430 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4431 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4434 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4435 # Here's a termcap entry I've been using for xterm_color, which comes
4436 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4437 # color stuff, I also have a status line defined as the window manager
4438 # title bar. [I have translated it to terminfo -- ESR]
4439 xterm-pcolor|xterm with color used for highlights and status line,
4441 bold=\E[1;43m, rev=\E[7;34m,
4442 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
4443 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4445 # This describes the capabilities of color_xterm, an xterm variant from
4446 # before ECMA-64 color support was folded into the main-line xterm release.
4447 # This entry is straight from color_xterm's maintainer.
4448 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4449 # The README's with the distribution also say that it supports SGR 21, 24, 25
4450 # and 27, but they are not present in the terminfo or termcap.
4451 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4452 OTbs, am, km, mir, msgr, xenl, XT,
4453 cols#80, it#8, lines#65, ncv@,
4454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4455 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4456 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4457 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4458 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4459 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4460 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4461 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4462 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4463 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4464 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4465 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4466 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4467 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4468 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4469 rmso=\E[27m, rmul=\E[24m,
4470 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4472 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4473 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4474 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4475 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4477 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4478 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4479 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4480 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4481 # that each of those implements the home, end, delete keys differently.
4483 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4484 # colors; note that this is not compatible with the 5.2 version.
4485 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4486 # match XFree86's xterm.terminfo usage and prevent circular links
4487 xterm-color|nxterm|generic color xterm,
4489 op=\E[m, use=xterm-r6, use=klone+color,
4491 # This entry describes an xterm with Sun-style function keys enabled
4492 # via the X resource setting "xterm*sunFunctionKeys:true"
4493 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4494 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4495 # because we want it to be seen as <kcpy>.
4496 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4497 # with their Sun keyboard labels instead.
4498 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4499 xterm-sun|xterm with sunFunctionKeys true,
4500 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4501 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4502 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4503 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4504 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4505 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4506 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4507 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4508 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4509 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4510 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4511 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4513 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4514 cols#80, lines#24, use=xterm-sun,
4517 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4518 gnome-rh62|Gnome terminal,
4520 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4523 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4525 # This implements a subset of vt102 with a random selection of features from
4526 # other terminals such as color and function-keys.
4528 # shift-f1 to shift-f10 are f11 to f20
4530 # NumLock changes the application keypad to approximate vt100 keypad, except
4531 # that there is no escape sequence matching comma (,).
4533 # Other defects observed:
4534 # vt100 LNM mode is not implemented.
4535 # vt100 80/132 column mode is not implemented.
4536 # vt100 DECALN is not implemented.
4537 # vt100 DECSCNM mode is not implemented, so flash does not work.
4538 # vt100 TBC (tab reset) is not implemented.
4539 # xterm alternate screen controls do not restore cursor position properly
4540 # it hangs in tack after running function-keys test.
4541 gnome-rh72|GNOME Terminal,
4543 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4544 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4545 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
4546 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4548 # GNOME Terminal 2.0.1 (Redhat 8.0)
4550 # Documentation now claims it implements vt220 (which is demonstrably false).
4551 # However, it does implement ECH, which is a vt220 feature. And there are
4552 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4553 # more of its bugs using vttest.
4555 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4556 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4558 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4559 # operations. Shift-tab generates a distinct sequence so it can be argued
4560 # that it implements kcbt.
4561 gnome-rh80|GNOME Terminal,
4563 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4564 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4566 # GNOME Terminal 2.2.1 (Redhat 9.0)
4568 # bce and msgr are repaired.
4569 gnome-rh90|GNOME Terminal,
4571 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4572 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4573 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4576 # GNOME Terminal 2.14.2 (Fedora Core 5)
4577 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4578 gnome-fc5|GNOME Terminal,
4580 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4581 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4583 # GNOME Terminal 2.18.1 (2007 snapshot)
4585 # For any "recent" version of gnome-terminal, it is futile to attempt to
4586 # support modifiers on cursor- and keypad keys because the program usually
4587 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4588 # of the keys (which more/less correspond to the termcap values), and will
4589 # interpret those according to the $TERM value, but others not in the
4590 # terminfo according to some constantly changing set of hacker guidelines -TD
4591 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4592 use=xterm+pcc2, use=gnome-fc5,
4593 gnome-2007|GNOME Terminal snapshot 2.18.1,
4596 # GNOME Terminal 2.22.3 (2008 snapshot)
4598 # In vttest, it claims to be a vt220 with national replacement character-sets,
4599 # but aside from the identifier string, implements only a small fraction of
4600 # vt220's behavior, which will make it less usable on a VMS system (unclear
4601 # what the intent of the developer is, since the NRC feature exposed in vttest
4602 # by this change does not work).
4603 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4604 use=vte+pcfkeys, use=vte-2007,
4605 gnome-2008|GNOME Terminal snapshot 2.22.3,
4608 # GNOME Terminal 3.6.0 (2012)
4609 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
4610 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
4613 # Testing with tack shows that flash does not/has not worked -TD
4614 vte-2012|VTE 0.34.1,
4616 dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
4617 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
4618 sitm=\E[3m, use=vte-2008,
4619 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
4620 # 61 differences from a correct entry for gnome terminal.
4621 gnome-2012|GNOME Terminal 3.6.0,
4624 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4625 # supply key information which is not built into the program. With 2.22.3,
4626 # this list is built into the program (which addresses the inadvertant use of
4627 # random terminfo data, though using a set of values which does not correspond
4628 # to any that xterm produces - still not solving the problem that GNOME
4629 # terminal hardcodes the $TERM variable as "xterm").
4631 # terminfo modifier code keys
4632 # kf13-kf24 shift 2 F1 to F12
4633 # kf25-kf36 control 5 F1 to F12
4634 # kf37-kf48 shift/control 6 F1 to F12
4635 # kf49-kf60 alt 3 F1 to F12
4636 # kf61-kf63 shift-alt 4 F1 to F3
4638 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4639 # no parameters. This appears to be rote copying based on xterm+pcc0.
4640 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4641 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4642 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4643 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4644 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4645 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4646 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4648 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4651 vte|VTE aka GNOME Terminal,
4653 gnome|GNOME Terminal,
4656 # palette is hardcoded...
4657 vte-256color|VTE with xterm 256-colors,
4658 use=xterm+256color, use=vte,
4659 gnome-256color|GNOME Terminal with xterm 256-colors,
4662 # XFCE Terminal 0.2.5.4beta2
4664 # This is based on some of the same source code, e.g., the VTE library, as
4665 # gnome-terminal, but has fewer features, fails more screens in vttest.
4666 # Since most of the terminfo-related behavior is due to the VTE library,
4667 # the terminfo is the same as gnome-terminal.
4672 # Multi-Gnome-Terminal 1.6.2
4674 # This does not use VTE, and does have different behavior (compare xfce and
4676 mgt|Multi GNOME Terminal,
4677 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4680 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4681 # or not is debatable).
4684 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4687 # (formerly known as kvt)
4689 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4690 # simplify this entry (and point out why konsole isn't xterm), we base this on
4691 # xterm-r6. The default keyboard appears to be 'linux'.
4694 # a) konsole implements several features from XFree86 xterm, though none of
4695 # that is documented - except of course in its source code - apparently
4696 # because its implementors are unaccustomed to reading documentation - as
4697 # evidenced by the sparse and poorly edited documentation distributed with
4698 # konsole. Some features such as the 1049 private mode are recognized but
4699 # incorrectly implemented as a duplicate of the 47 private mode.
4700 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4701 # sends PC-style escapes rather than vt100.
4702 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4703 # parse some control sequences. Also fails vttest Primary Device Attributes
4704 # by sending a bogus code (in the source it says it's supposed to be a
4705 # vt220, which is doubly incorrect because it does not implement vt220
4706 # control sequences except for a few special cases). Treat it as a
4707 # mildly-broken vt102.
4709 # Update for konsole 1.3.2:
4710 # The 1049 private mode works (but see the other xterm screens in vttest).
4711 # Primary Device Attributes now returns the code for a vt100 with advanced
4712 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4714 # Updated for konsole 1.6.4:
4715 # add konsole-solaris
4717 # Updated for konsole 1.6.6:
4718 # add control-key modifiers for function-keys, etc.
4720 # Updated for konsole 2.12.4:
4723 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4724 # different from xterm (and vt100's). They have the same behavior in this
4725 # detail, but it is unclear which copies the other.
4726 konsole-base|KDE console window,
4729 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4730 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4731 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4732 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4733 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4734 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
4735 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
4736 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4737 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4738 sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
4739 use=ecma+color, use=xterm-r6,
4740 konsole-linux|KDE console window with linux keyboard,
4741 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4742 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4743 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4744 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4745 konsole-solaris|KDE console window with Solaris keyboard,
4746 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4747 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4748 # than testing the code.
4749 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4750 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4751 # The value for kbs reflects local customization rather than the settings used
4752 # for XFree86 xterm.
4753 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4754 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4756 # Konsole does not implement shifted cursor-keys.
4757 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4758 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4760 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4761 # it is still useful for deriving the other entries.
4762 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4763 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4764 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4765 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4766 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4767 khome=\E[H, use=konsole-base,
4768 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4769 kbs=^H, kdch1=\177, use=konsole-vt100,
4770 konsole-16color|klone of xterm-16color,
4771 ncv#32, use=ibm+16color, use=konsole,
4772 # make a default entry for konsole
4773 konsole|KDE console window,
4776 # palette is hardcoded...
4777 konsole-256color|KDE console window with xterm 256-colors,
4778 use=xterm+256setaf, use=konsole,
4781 # http://mlterm.sourceforge.net/
4783 mlterm|multi lingual terminal emulator,
4786 # Tested mlterm 3.2.2:
4787 # mlterm 3.x has made changes, but they are not reflected in the included
4788 # mlterm.ti; this entry is based on testing with tack and vttest -TD
4789 mlterm3|multi lingual terminal emulator,
4790 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
4791 ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
4792 use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
4794 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4796 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4799 # The function keys are numbered based on shift/control/alt modifiers, except
4800 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4801 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4802 # how it is configured.
4804 # kf1 to kf12 \E[11~ to \E[24~
4805 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4806 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4807 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4808 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4809 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4810 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4811 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4813 mlterm2|multi lingual terminal emulator,
4814 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4815 colors#8, cols#80, it#8, lines#24, pairs#64,
4816 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4817 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4818 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4819 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4820 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4821 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4822 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4823 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4824 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4825 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4826 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4827 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4828 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4829 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4830 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4831 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4832 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4833 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4834 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4835 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4836 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4837 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4838 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4839 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4840 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4842 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4843 # looks in its termcap to decide which string to send. If it used terminfo
4844 # (when available), it could use the extended names introduced for xterm.
4845 mlterm+pcfkeys|fragment for PC-style fkeys,
4846 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4847 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4848 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4849 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4850 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4851 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4852 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4853 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4854 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4856 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4857 use=xterm+256color, use=mlterm,
4860 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4861 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4864 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4865 # but some applications don't work with that.
4866 # It also has an AIX extension
4870 # but the latter does not work correctly.
4872 # The distributed terminfo says it implements hpa and vpa, but they are not
4873 # implemented correctly, using relative rather than absolute positioning.
4875 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4876 # Since rxvt is not really compatible with xterm, it should be configured as
4877 # "rxvt" or "rxvt-color".
4879 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4880 # remove km as per tack test -TD
4881 rxvt-basic|rxvt terminal base (X Window System),
4882 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4883 cols#80, it#8, lines#24,
4884 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4885 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4886 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4887 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4888 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4889 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4890 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4891 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4892 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4893 ind=^J, is1=\E[?47l\E=\E[?1l,
4894 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4895 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4896 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4898 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4899 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4900 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4901 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4902 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4903 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4904 use=rxvt+pcfkeys, use=vt220+keypad,
4905 # Key Codes from rxvt reference:
4907 # Note: Shift + F1-F10 generates F11-F20
4909 # For the keypad, use Shift to temporarily override Application-Keypad
4910 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4911 # is off, escape sequences toggle Application-Keypad setting.
4912 # Also note that values of Home, End, Delete may have been compiled
4913 # differently on your system.
4915 # Normal Shift Control Ctrl+Shift
4916 # Tab ^I ESC [ Z ^I ESC [ Z
4917 # BackSpace ^H ^? ^? ^?
4918 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4919 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4920 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4921 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4922 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4923 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4924 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4925 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4926 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4927 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4928 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4929 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4930 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4931 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4932 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4933 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4934 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4935 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4936 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4937 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4938 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4939 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4940 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4941 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4942 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4943 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4944 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4945 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4946 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4949 # Up ESC [ A ESC [ a ESC O a ESC O A
4950 # Down ESC [ B ESC [ b ESC O b ESC O B
4951 # Right ESC [ C ESC [ c ESC O c ESC O C
4952 # Left ESC [ D ESC [ d ESC O d ESC O D
4953 # KP_Enter ^M ESC O M
4954 # KP_F1 ESC O P ESC O P
4955 # KP_F2 ESC O Q ESC O Q
4956 # KP_F3 ESC O R ESC O R
4957 # KP_F4 ESC O S ESC O S
4958 # XK_KP_Multiply * ESC O j
4959 # XK_KP_Add + ESC O k
4960 # XK_KP_Separator , ESC O l
4961 # XK_KP_Subtract - ESC O m
4962 # XK_KP_Decimal . ESC O n
4963 # XK_KP_Divide / ESC O o
4975 # The source-code for rxvt actually defines mappings for F21-F35, using
4976 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4977 # are rare, so this entry uses the shift- and control-modifiers as in
4978 # xterm+pcfkeys to define keys past F12.
4980 # kIC is normally not used, since rxvt performs a paste for that (shifted
4981 # insert), unless private mode 35 is set.
4983 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4984 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4985 rxvt+pcfkeys|fragment for PC-style fkeys,
4986 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4987 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4988 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4989 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4990 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4991 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4992 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4993 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4994 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4995 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4996 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4997 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4998 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4999 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5000 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5001 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5002 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5003 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5004 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5005 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5007 rxvt|rxvt terminal emulator (X Window System),
5009 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5010 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5011 rxvt-color|rxvt terminal emulator (X Window System),
5013 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5014 use=xterm+256color, use=rxvt,
5015 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5016 use=xterm+88color, use=rxvt,
5017 rxvt-xpm|rxvt terminal emulator (X Window System),
5019 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5020 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5022 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5023 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
5026 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5027 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5028 rxvt-16color|xterm with 16 colors like aixterm,
5029 ncv#32, use=ibm+16color, use=rxvt,
5034 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5035 # makes its function-keys different from other flavors of rxvt -TD
5036 mrxvt|multitabbed rxvt,
5038 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5039 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5040 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5041 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5042 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5043 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5046 mrxvt-256color|multitabbed rxvt with 256 colors,
5047 use=xterm+256color, use=mrxvt,
5050 # From: Michael Jennings <mej@valinux.com>
5054 # removed kf0 which conflicts with kf10 -TD
5055 # remove cvvis which conflicts with cnorm -TD
5056 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5057 # but does otherwise follow the rxvt+pcfkeys model -TD
5058 # remove nonworking flash -TD
5059 # remove km as per tack test -TD
5060 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5061 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5062 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5063 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5064 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5065 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5066 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5067 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5068 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5069 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5070 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5071 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5072 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5073 is1=\E[?47l\E>\E[?1l,
5074 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5075 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5076 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5077 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5078 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5079 rmso=\E[27m, rmul=\E[24m,
5080 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5081 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5083 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5084 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5085 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5086 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5089 Eterm-256color|Eterm with xterm 256-colors,
5090 use=xterm+256color, use=Eterm,
5092 Eterm-88color|Eterm with 88 colors,
5093 use=xterm+88color, use=Eterm,
5096 # Based on rxvt 2.4.8, it has a few differences in key bindings
5097 aterm|AfterStep terminal,
5099 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5103 # This is not based on xterm's source...
5104 # vttest shows several problems with keyboard, cursor-movements.
5105 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5106 xiterm|internationalized terminal emulator for X,
5108 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5112 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5113 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5114 # chars look like --esr)
5115 hpterm|X-hpterm|hp X11 terminal emulator,
5116 am, da, db, mir, xhp,
5117 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5118 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
5119 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5120 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5121 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
5122 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5123 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5124 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5125 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5126 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5127 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5128 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5129 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5130 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5131 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5133 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5134 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5135 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5136 # HPUX 11 provides a color version.
5137 hpterm-color|HP X11 terminal emulator with color,
5141 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5142 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5145 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5146 # It corresponds to emu's internal emulation:
5148 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5149 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5150 # fixes: add civis, cnorm, sgr -TD
5151 emu|emu native mode,
5152 am, bce, mir, msgr, xon,
5153 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5154 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
5155 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5156 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5157 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5158 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5159 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5160 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5161 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5162 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5163 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
5164 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5165 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5166 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5167 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5168 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5169 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5170 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5172 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
5173 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5175 # vt220 Terminfo entry for the Emu emulation, corresponds to
5177 # with NumLock set (to make the keypad transmit kf0-kf9).
5178 # fixes: add am, xenl, corrected sgr0 -TD
5179 emu-220|Emu-220 (vt200-7bit mode),
5181 cols#80, it#8, lines#24, vt#200,
5182 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5183 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5184 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
5185 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5186 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5187 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5188 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5189 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5190 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5191 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5192 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5193 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5194 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5195 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5196 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5197 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5198 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5199 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5200 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5201 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5202 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5203 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5204 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5205 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5208 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5209 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5210 # indicate that it emulates more than one terminal, but incompletely.
5212 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5213 # It is based on vt102's entry, with some subtle differences, but also
5215 # supports ANSI colors (except for 'op' string)
5216 # apparently implements alternate screen like xterm
5217 # does not use padding, of course.
5218 mvterm|vv100|SwitchTerm aka mvTERM,
5219 am, eslok, hs, km, mir, msgr, xenl,
5220 colors#8, cols#80, it#8, lines#24, pairs#64,
5221 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5222 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
5223 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5224 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5225 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5226 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5227 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5228 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5229 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
5230 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5231 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5232 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5233 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5235 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5236 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5237 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5238 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5239 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5240 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5244 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5246 # "mterm -type ansi" sets $TERM to "ansi"
5247 mterm-ansi|ANSI emulation,
5250 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5251 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5252 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5253 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5254 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5255 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5256 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5257 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5258 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5259 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5261 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5262 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5264 # mterm normally sets $TERM to "mterm"
5265 mterm|mouse-sun|Der Mouse term,
5268 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
5269 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5270 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
5271 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5272 # "mterm -type decansi" sets $TERM to "decansi"
5274 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5275 decansi|ANSI emulation with DEC compatibility hacks,
5276 am, mir, msgr, xenl,
5277 colors#8, it#8, pairs#64,
5278 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5279 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5280 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5281 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5282 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5283 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5284 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5285 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5286 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5287 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5288 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5289 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5290 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5291 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5292 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5293 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5294 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5295 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5296 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5297 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5298 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5299 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5300 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5301 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5302 u7=\E[6n, vpa=\E[%i%p1%dd,
5305 # http://vwm.sourceforge.net/
5307 # VWM 2.0.2 (2009-05-01)
5308 # vwmterm is a terminal emulator written for the VWM console window manager.
5309 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5311 am, bce, ccc, mir, msgr, npc, xenl, xon,
5313 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5314 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5315 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
5316 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5317 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5318 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5319 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
5320 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5321 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5322 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5323 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5324 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5325 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5326 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5327 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5328 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5329 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5333 # MGR is a Bell Labs window system lighter-weight than X.
5334 # These entries describe MGR's xterm-equivalent.
5335 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5338 mgr|Bellcore MGR (non X) window system terminal emulation,
5340 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
5341 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5342 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5343 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5344 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5345 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5346 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5347 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
5348 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5350 mgr-sun|Mgr window with Sun keyboard,
5351 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5352 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5353 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5354 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5355 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5356 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5357 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5358 mgr-linux|Mgr window with Linux keyboard,
5359 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5360 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5361 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5362 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5363 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5369 # This version uses a table which supports a single modifier (a subset of
5370 # xterm's keys, using the same scheme). Because it supports only a single
5371 # modifier in this table, function keys f36-f48 are normally unavailable
5372 # because they are assigned to modifier-4.
5374 # The program assigns TERM to match the program name (the upstream source says
5375 # "st", but Debian renames it to "stterm").
5377 # The source includes two entries which are not useful here:
5378 # st-meta| simpleterm with meta key,
5379 # st-meta-256color| simpleterm with meta key and 256 colors,
5380 # because st's notion of "meta" does not correspond to the terminfo definition.
5381 # Rather, it acts like xterm - when the meta feature is disabled.
5384 st|stterm| simpleterm 0.4.1,
5385 am, bce, hs, mir, msgr, ul, xenl,
5386 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5387 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5388 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5389 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
5390 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5391 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5392 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5393 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5394 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5395 enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H,
5396 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5397 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
5398 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
5399 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
5400 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
5401 kbs=\177, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
5402 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5403 kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
5404 kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
5405 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
5406 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5407 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5408 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5409 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5410 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5411 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5412 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5413 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5414 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5415 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5416 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
5417 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5418 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5419 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5420 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5421 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5422 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5423 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, op=\E[39;49m,
5424 rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B,
5425 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
5426 rmul=\E[m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
5427 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5428 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5429 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5430 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%;m,
5431 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5432 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5433 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5434 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
5438 # Note: the original terminfo description uses leading blank to persuade
5439 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5442 # Reading the code shows it should work for aixterm 16-colors
5443 # - added st-16color
5446 # - set eo (erase-overstrike)
5448 # - tbc doesn't work
5450 # - cbt doesn't work
5451 # - shifted cursor-keys send sequences like rxvt
5452 # - sgr referred to unimplemented "invis" mode.
5453 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5454 simpleterm|old-st| simpleterm 0.1.1,
5455 am, eo, mir, msgr, ul, xenl,
5456 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5457 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5458 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5459 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5460 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5461 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5462 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5463 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5464 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
5465 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5466 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5467 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5468 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5469 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5470 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5471 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5472 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
5473 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5474 st-16color|stterm-16color|simpleterm with 16-colors,
5475 use=ibm+16color, use=st,
5476 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5477 # shown in the titlebar.
5479 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5480 # characters, making the choice nonportable.
5481 st-256color|stterm-256color|simpleterm with 256 colors,
5482 use=xterm+256color, use=st,
5485 # https://code.google.com/p/jessies/
5486 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5487 # Debian/current -TD (2011/8/20)
5489 # There are some packaging problems:
5490 # a) using Java, the program starts off using 50Mb, and climbs from there,
5491 # up to 114Mb after testing (no scrollback).
5492 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5493 # (two copies, just in case the host happens to be Mac OS X).
5494 # I deleted this after testing with tack.
5496 # Issues/features found with tack:
5497 # a) tbc does not work (implying that hts also is broken).
5498 # Comparing with the tabs utility shows a problem with the last tabstop on
5500 # b) has xterm-style shifted function-key strings
5501 # meta also is used, but control is ignored.
5502 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
5503 # d) some combinations of shift/control send xterm-style sequences for
5504 # insert/delete/home/end.
5505 # e) numeric keypad sends only numbers (compare with vttest).
5506 # f) meta mode (km) is not implemented.
5508 # Issues found with ncurses test-program:
5509 # a) bce is inconsistently implemented
5510 # b) widths of Unicode values above 256 do not always agree with wcwidth.
5512 # Checked with vttest, found low degree of compatibility there.
5514 # Checked with xterm's scripts, found that the 256-color palette is fixed.
5518 # b) corrected sgr0 to reset alternate character set
5519 # c) modified smacs/rmacs to use SCS rather than SI/SO
5522 terminator|Terminator no line wrap,
5523 eo, mir, msgr, xenl, xon,
5524 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
5525 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5526 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5527 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5528 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
5529 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5530 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5531 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5532 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
5533 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
5534 is1=\E[?47l\E=\E[?1l,
5535 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5537 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5538 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5539 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5540 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5541 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5542 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
5543 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
5544 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5545 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
5546 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
5547 setaf=\E[38;5;%p1%dm,
5548 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5549 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
5550 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
5554 # http://enlightenment.org
5556 # Tested terminology-0.3.0, using tack and vttest. This is not a vt100
5557 # emulator, nor is it compatible with xterm, but it uses a few features from
5561 # cursor does not fill on focus
5562 # there are pervasive problems with clearing/erasing parts of the screen
5563 # resizing the window causes it to stop listening to the keyboard
5565 # doesn't understand vt100 CPR needed for resize
5570 # uses bce model for colors, but (see below) fails the vttest screens
5571 # has partial support for 256color feature.
5573 # ctrl+shift (ignored)
5575 # shift-alt modifier -> shift (2)
5579 # tack modifiers do not work for fkeys
5580 # ctrl + khome/kend works - none of the other modifiers do
5582 # spits lots of messages from termptyesc.c especially in vttest.
5583 # no 132-column mode
5584 # fails menu 1, 2 (definitely not vt100-compatible)
5586 # secondary report says (perhaps... vt420): \E[>41;285;0c
5587 # CHA, HPR, VPA, CNL, CPL work
5588 # BCE with ED/EL - fail
5589 # BCE with ECH/indexing - fail
5591 # unlike teken, background light/dark works
5593 # X10 and Normal mouse work
5594 # Any-event mouse works
5595 # Mouse button-event works
5596 terminology|EFL-based terminal emulator,
5598 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
5599 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5600 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5601 kind=\E[1;2B, kri=\E[1;2A,
5602 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
5603 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
5604 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
5605 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
5606 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
5607 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
5608 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
5609 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
5610 kRIT7=\E[1;7C, kUP=\E[1;2A, use=vt100,
5613 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
5616 # Columbus UNIX virtual terminal. This terminal also appears in
5617 # UNIX 4.0 and successors as line discipline 1 (?), but is
5618 # undocumented and does not really work quite right.
5619 cbunix|cb unix virtual terminal,
5621 cols#80, lines#24, lm#0,
5622 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5623 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
5624 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
5625 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
5626 smso=\Ea^D, smul=\Ea^A,
5627 # (vremote: removed obsolete ":nl@:" -- esr)
5628 vremote|virtual remote terminal,
5630 cols#79, use=cbunix,
5632 pty|4bsd pseudo teletype,
5633 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
5634 smso=\Ea$, smul=\Ea!, use=cbunix,
5638 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
5639 eterm|gnu emacs term.el terminal emulation,
5642 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5643 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5644 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5645 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5646 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5647 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5648 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
5649 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
5650 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
5653 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
5654 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
5655 am, mir, msgr, xenl,
5656 colors#8, cols#80, lines#24, pairs#64,
5657 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5658 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5659 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5660 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5661 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5662 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5663 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
5664 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5665 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
5666 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
5667 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5668 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
5669 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
5670 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5671 u6=\E[%i%d;%dR, u7=\E[6n,
5675 # Entries for use by the `screen' program by Juergen Weigert,
5676 # Michael Schroeder, Oliver Laumann. The screen and
5677 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
5678 # come from University of Wisconsin and may be older.
5679 # (screen: added <cnorm> on ANSI model -- esr)
5681 # 'screen' defines extensions to termcap. Some are used in its terminal
5683 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
5684 # AX (bool) Does understand ANSI set default fg/bg color
5685 # (\E[39m / \E[49m).
5686 # S0 (str) Switch charset 'G0' to the specified charset.
5687 # E0 (str) Switch charset 'G0' back to standard charset.
5689 # Initially tested with screen 3.09.08
5691 # According to its manual page
5693 # Screen is a full-screen window manager that multiplexes a physical
5694 # terminal between several processes (typically interactive shells). Each
5695 # virtual terminal provides the functions of a DEC VT100 terminal and, in
5696 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
5697 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
5698 # multiple character sets).
5700 # However, there is a design error in its support for video highlights. The
5701 # program uses a table (rendlist) which equates the SGR codes to terminal
5702 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
5703 # is modified only by the presence or absence of the corresponding capabilities.
5704 # Not by their values.
5706 # If screen sets the TERMCAP variable, it uses hardcoded strings which
5707 # correspond to the rendlist table.
5709 # The table gives this information:
5721 # 22 reset bold, standout and dim
5723 # 24 reset underline
5728 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
5729 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
5730 # Without some redesign of screen, it is not possible to extend the set of
5731 # capabilities. Substitution would be possible, e.g., sending italics in
5732 # place of underline.
5734 # Because screen uses hard-coded parsing, it does not check if two capabilities
5735 # use the same value. For example, changing standout to be the same as any of
5736 # the other capabilities will confuse screen. Curses applications which use
5737 # sgr are not impacted (because that usually resets all capabilities before
5738 # setting any), but termcap applications do not use sgr -TD
5739 screen|VT 100/ANSI X3.64 virtual terminal,
5740 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
5741 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
5742 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5743 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5744 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
5745 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5746 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5747 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5748 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5749 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
5750 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5751 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
5752 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5753 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5754 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5755 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5756 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
5757 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5758 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
5759 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
5760 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5761 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
5762 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
5763 S0=\E(%p1%c, use=ecma+color,
5764 # The bce and status-line entries are from screen 3.9.13 (and require some
5765 # changes to .screenrc).
5766 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
5769 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
5770 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
5772 # ======================================================================
5773 # Entries for GNU Screen with 16 colors.
5774 # Those variations permit to benefit from 16 colors palette, and from
5775 # bold font and blink attribute separated from bright colors. But they
5776 # are less portable than the generic "screen" 8 color entries: Their
5777 # usage makes real sense only if the terminals you attach and reattach
5778 # do all support 16 color palette.
5780 screen-16color|GNU Screen with 16 colors,
5781 use=ibm+16color, use=screen,
5783 screen-16color-s|GNU Screen with 16 colors and status line,
5784 use=ibm+16color, use=screen-s,
5786 screen-16color-bce|GNU Screen with 16 colors and BCE,
5787 use=ibm+16color, use=screen-bce,
5789 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
5790 bce, use=ibm+16color, use=screen-s,
5792 # ======================================================================
5793 # Entries for GNU Screen 4.02 with --enable-colors256.
5795 screen-256color|GNU Screen with 256 colors,
5796 use=xterm+256setaf, use=screen,
5798 screen-256color-s|GNU Screen with 256 colors and status line,
5799 use=xterm+256setaf, use=screen-s,
5801 screen-256color-bce|GNU Screen with 256 colors and BCE,
5802 bce, use=xterm+256setaf, use=screen-bce,
5804 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
5805 bce, use=xterm+256setaf, use=screen-s,
5807 # ======================================================================
5809 # Read the fine manpage:
5810 # When screen tries to figure out a terminal name for
5811 # itself, it first looks for an entry named "screen.<term>",
5812 # where <term> is the contents of your $TERM variable. If
5813 # no such entry exists, screen tries "screen" (or "screen-w"
5814 # if the terminal is wide (132 cols or more)). If even this
5815 # entry cannot be found, "vt100" is used as a substitute.
5817 # Notwithstanding the manpage, screen uses its own notion of the termcap
5818 # and some keys from "screen.<term>" are ignored. Here is an entry which
5819 # covers those (tested with screen 4.00.02) -TD
5820 screen+fkeys|function-keys according to screen,
5821 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5824 # See explanation before "screen" entry. Cancel italics so that applications
5825 # do not assume screen supports the feature. Add this tweak to entries which
5826 # extend screen for terminals which do support italics.
5827 screen+italics|screen cannot support italics,
5830 # Here are a few customized entries which are useful -TD
5833 # (a) screen does not support invis.
5834 # (b) screen's implementation of bw is incorrect according to tack.
5835 # (c) screen appears to hardcode the strings for khome/kend, making it
5836 # necessary to override the "use=" clause's values (screen+fkeys).
5837 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5838 # which is NOT the same as the terminfo screen.<term>.
5839 # (e) when screen finds one of these customized entries, it sets $TERM to
5840 # match. Hence, no "screen.xterm" entry is provided, since that would
5841 # create heartburn for people running remote xterm's.
5843 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5844 # since the default translations override the built-in keycode
5845 # translation. They are suppressed here to show what is tested by tack.
5846 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5848 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5849 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
5850 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
5851 # xterm-r6 does not really support khome/kend unless it is propped up by
5852 # the translations resource.
5853 screen.xterm-r6|screen customized for X11R6 xterm,
5854 bw, use=screen+fkeys, use=xterm-r6,
5855 # Color applications running in screen and TeraTerm do not play well together
5856 # on Solaris because Sun's curses implementation gets confused.
5857 screen.teraterm|disable ncv in teraterm,
5859 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5860 use=screen+fkeys, use=screen,
5862 screen.rxvt|screen in rxvt,
5864 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5865 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5866 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5867 screen.Eterm|screen in Eterm,
5868 use=screen+fkeys, use=Eterm,
5869 screen.mrxvt|screen in mrxvt,
5870 use=screen+fkeys, use=mrxvt,
5871 screen.vte|screen in any VTE-based terminal,
5872 use=screen+italics, use=screen+fkeys, use=vte,
5873 screen.gnome|screen in GNOME Terminal,
5874 use=screen+italics, use=screen+fkeys, use=gnome,
5875 screen.konsole|screen in KDE console window,
5876 use=screen+italics, use=screen+fkeys, use=konsole,
5877 # fix the backspace key
5878 screen.linux|screen in linux console,
5880 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5881 screen.mlterm|screen in mlterm,
5882 use=screen+fkeys, use=mlterm,
5884 # The default "screen" entry is reasonably portable, but not optimal for the
5885 # most widely-used terminal emulators. The "bce" capability is supported in
5886 # screen since 3.9.13, and when used, will require fewer characters to be sent
5887 # to the terminal for updates.
5889 # If you are using only terminals which support bce, then you can use this
5890 # feature in your screen configuration.
5892 # Adding these lines to your ".screenrc" file will allow using these customized
5897 screen-bce.xterm-new|screen optimized for modern xterm,
5899 ech@, use=screen+italics, use=screen.xterm-new,
5900 screen-bce.rxvt|screen optimized for rxvt,
5902 ech@, use=screen.rxvt,
5903 screen-bce.Eterm|screen optimized for Eterm,
5905 ech@, use=screen.Eterm,
5906 screen-bce.mrxvt|screen optimized for mrxvt,
5908 ech@, use=screen.mrxvt,
5909 screen-bce.gnome|screen optimized for GNOME-Terminal,
5911 ech@, use=screen+italics, use=screen.gnome,
5912 screen-bce.konsole|screen optimized for KDE console window,
5914 ech@, use=screen+italics, use=screen.konsole,
5915 screen-bce.linux|screen optimized for linux console,
5917 ech@, use=screen.linux,
5918 screen-bce.mlterm|screen optimized for mlterm,
5920 ech@, use=screen.mlterm,
5922 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5923 cols#132, use=screen,
5925 screen2|old VT 100/ANSI X3.64 virtual terminal,
5926 cols#80, it#8, lines#24,
5927 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5928 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5929 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5930 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5931 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5932 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5933 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5934 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5935 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5936 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5937 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5938 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5939 screen3|older VT 100/ANSI X3.64 virtual terminal,
5941 cols#80, it#8, lines#24,
5942 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5943 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5944 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5945 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5946 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5947 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5948 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5949 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5950 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5951 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5952 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5953 smul=\E[4m, tbc=\E[3g,
5957 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5958 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5959 # been maintained until recently by the National Center for Supercomputer
5960 # Applications, and it is feature rich, stable and free. It can be downloaded
5961 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5962 # xterm+sl, and the docs at NCSA. It works well.
5964 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5965 # The terminal options should be set as follows:
5966 # Xterm sequences ON
5967 # use VT wrap mode ON
5968 # use Emacs arrow keys OFF
5969 # CTRL-COMND is Emacs meta ON
5971 # answerback string: "ncsa-vt220-8"
5972 # setup keys: all disabled
5974 # Application mode is not used.
5976 # Other special mappings:
5983 # PAGEDOWN Next Screen
5985 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5988 # The status-line manipulation is a mapping of the xterm-compatible control
5989 # sequences for setting the window-title. So you must use tsl and fsl in
5990 # pairs, since the latter ends the string that is loaded to the window-title.
5991 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5992 am, km, mir, msgr, xenl,
5993 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5994 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5995 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5996 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5997 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5998 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5999 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6000 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
6001 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6002 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6004 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
6005 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6006 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6007 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6008 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6009 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6010 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6011 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6012 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6013 rmso=\E[27m, rmul=\E[24m,
6014 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6015 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
6016 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6017 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6018 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6019 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6020 use=ncsa-m, use=klone+color,
6021 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6023 dsl@, fsl@, tsl@, use=ncsa,
6024 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6026 dsl@, fsl@, tsl@, use=ncsa-m,
6028 # The documented function-key mapping refers to the Apple Extended Keyboard
6029 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6030 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6031 # some keyboards and many applications require these as F1-F4.
6033 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6034 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6035 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6036 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6037 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6038 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6040 #### Pilot Pro Palm-Top
6042 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6043 # http://www.ai/~iang/TGssh/
6044 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6047 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
6048 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6049 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
6052 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6053 # These entries are for the Embeddable Linux Kernel System (ELKS)
6054 # project - an heavily stripped down Linux to be run on 16 bit
6055 # boxes or, eventually, to be used in embedded systems - and have been
6056 # adapted from the stock ELKS termcap. The project itself looks stalled,
6057 # and the latest improvements I know of date back to March 2000.
6059 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6060 # as an added bonus, this deals with all the capabilities common to
6061 # both VT52 and ANSI (or, eventually, "special") modes.
6063 elks-glasstty|ELKS glass-TTY capabilities,
6065 cols#80, it#8, lines#25,
6066 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
6069 elks-vt52|ELKS vt52 console,
6070 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6071 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6072 home=\EH, use=elks-glasstty,
6074 elks-ansi|ELKS ANSI console,
6075 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6076 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6077 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6079 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6080 # instead of VT52, but the "elks" entry still refers to the latter.
6082 elks|default ELKS console,
6085 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6086 # one but in screen size
6088 sibo|ELKS SIBO console,
6089 cols#61, it#8, lines#20, use=elks-vt52,
6091 ######## COMMERCIAL WORKSTATION CONSOLES
6097 # This is from the OSF/1 Release 1.0 termcap file
6098 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6101 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6102 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6103 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6104 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6105 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6110 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6111 oldsun|Sun Microsystems Workstation console,
6112 OTbs, am, km, mir, msgr,
6113 cols#80, it#8, lines#34,
6114 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
6115 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6116 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6117 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6118 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6119 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6120 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6121 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6122 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6123 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6124 sun-il|Sun Microsystems console with working insert-line,
6127 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6128 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6129 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6130 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6131 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6132 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
6133 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6134 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6135 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6136 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6137 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6138 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6139 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6140 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6141 # flake out on the last line. Unfortunately, without them the terminal has no
6143 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6144 il@, il1@, use=sun-il,
6145 # If you are using an SS5, change the sun definition to use sun-ss5.
6146 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6149 sun+sl|Sun Workstation window status line,
6151 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6153 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6154 sun-s|Sun Microsystems Workstation window with status line,
6156 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6157 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6159 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6160 sun-48|Sun 48-line window,
6161 cols#80, lines#48, use=sun,
6162 sun-34|Sun 34-line window,
6163 cols#80, lines#34, use=sun,
6164 sun-24|Sun 24-line window,
6165 cols#80, lines#24, use=sun,
6166 sun-17|Sun 17-line window,
6167 cols#80, lines#17, use=sun,
6168 sun-12|Sun 12-line window,
6169 cols#80, lines#12, use=sun,
6170 sun-1|Sun 1-line window for sysline,
6173 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
6174 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6175 ich1@, rmir@, smir@, use=sun,
6176 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6178 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6179 sun-type4|Sun Workstation console with type 4 keyboard,
6180 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6181 kcuu1=\E[215z, use=sun-il,
6183 # Most of the current references to sun-color are from users wondering why this
6184 # is the default on install. Details from reading the wscons manpage, adding
6185 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6186 # when those were added -TD (2005-05-28)
6188 # According to wscons manpage, color is supported only on IA systems.
6189 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6190 # does not list these. It also sets ncv#3, however that corresponds to
6191 # underline and standout.
6193 # Since the documentation and terminfo do not agree, see also current code at
6194 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6196 # That (actually a different driver which "supports" sun-color) also supports
6203 # It supports bold, but not underline -TD (2009-09-19)
6204 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6205 colors#8, ncv#3, pairs#64,
6206 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6207 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6208 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6209 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6210 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6211 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6212 smso=\E[7m, use=sun,
6217 # (wsiris: this had extension capabilities
6218 # :HS=\E7F2:HE=\E7F7:\
6219 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6220 # See the note on Iris extensions near the end of this file.
6221 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6222 # <flash> from BRL -- esr)
6223 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6224 OTbs, OTnc, OTpt, am,
6225 OTkn#3, cols#80, it#8, lines#40,
6226 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6227 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6228 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6229 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6230 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6231 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6232 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6233 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6238 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6239 # environment). Note: these have nothing to do with Sony's News workstation
6243 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6244 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6245 psterm|psterm-basic|NeWS psterm-80x34,
6246 OTbs, am, hs, km, ul,
6247 cols#80, it#8, lines#34,
6248 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6249 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6250 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6251 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6252 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6253 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6254 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6256 psterm-96x48|NeWS psterm 96x48,
6257 cols#96, lines#48, use=psterm,
6258 psterm-90x28|NeWS psterm 90x28,
6259 cols#90, lines#28, use=psterm,
6260 psterm-80x24|NeWS psterm 80x24,
6261 cols#80, lines#24, use=psterm,
6262 # This is a faster termcap for psterm. Warning: if you use this termcap,
6263 # some control characters you type will do strange things to the screen.
6264 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6265 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6266 OTbs, am, hs, km, ul,
6267 cols#80, it#8, lines#34,
6268 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6269 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6270 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6271 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6272 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6273 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6274 smso=^Oo, smul=^Ou, tsl=^Ol,
6278 # Use `glasstty' for the Workspace application
6281 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6284 cols#80, it#8, lines#24,
6285 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6286 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6287 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6288 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6289 nextshell|NeXT Shell application,
6292 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
6295 #### Sony NEWS workstations
6298 # (news-unk: this had :KB=news: -- esr)
6299 news-unk|SONY NEWS vt100 emulator common entry,
6300 OTbs, OTpt, am, xenl,
6302 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6303 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6304 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6305 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6306 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6307 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6308 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6309 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6310 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6311 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6312 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6313 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6315 # (news-29: this had :TY=ascii: --esr)
6317 lines#29, use=news-unk,
6318 # (news-29-euc: this had :TY=euc: --esr)
6321 # (news-29-sjis: this had :TY=sjis: --esr)
6325 # (news-33: this had :TY=ascii: --esr)
6327 lines#33, use=news-unk,
6328 # (news-33-euc: this had :TY=euc: --esr)
6331 # (news-33-sjis: this had :TY=sjis: --esr)
6335 # (news-42: this had :TY=ascii: --esr)
6337 lines#42, use=news-unk,
6338 # (news-42-euc: this had :TY=euc: --esr)
6341 # (news-42-sjis: this had :TY=sjis: --esr)
6345 # NEWS-OS old termcap entry
6347 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6348 news-old-unk|SONY NEWS vt100 emulator common entry,
6349 OTbs, OTpt, am, xenl,
6351 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6352 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6353 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6354 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6355 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6356 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6357 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6358 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6359 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6361 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6362 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6365 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6368 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
6369 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
6371 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
6374 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
6375 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
6378 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6381 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
6382 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
6385 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6388 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
6389 # also the alias vt100-bm.
6390 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
6393 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
6396 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
6397 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
6400 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6403 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
6404 news28|sony vt100 emulator 28 lines,
6407 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
6410 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
6411 news29|news28-a|sony vt100 emulator 29 lines,
6413 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
6416 # (news511: this had :TY=sjis: --esr)
6417 nwp511|nwp-511|nwp-511 vt100,
6418 OTbs, OTpt, am, xenl,
6420 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6421 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
6422 ed=\E[J$<30/>, el=\E[K$<3/>,
6423 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
6424 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
6425 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
6426 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
6427 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6428 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
6429 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6430 # (news517: this had :TY=sjis:. --esr)
6431 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
6434 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6435 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
6436 tsl=\E[1$}\E[;%df, use=vt200,
6437 # (news517-w: this had :TY=sjis:. --esr)
6438 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
6441 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6442 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6443 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6444 tsl=\E[1$}\E[;%df, use=vt200,
6446 #### Common Desktop Environment
6449 # This ships with Sun's CDE in Solaris 2.5
6450 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
6451 dtterm|CDE desktop terminal,
6452 am, mir, msgr, xenl, xon,
6453 cols#80, it#8, lines#24, lm#0, ncv@,
6454 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6455 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6456 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
6457 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6458 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6459 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6460 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6461 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6462 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
6463 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6464 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
6465 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6466 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6467 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6468 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6469 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
6470 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6471 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6472 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6473 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
6475 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6476 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6477 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
6479 ######## Non-Unix Consoles
6482 #### EMX termcap.dat compatibility modes
6484 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
6485 # no_color_video to inform the application that standout(1), underline(2)
6486 # reverse(4) and invisible(64) don't work with color.
6487 emx-base|DOS special keys,
6490 bel=^G, use=ansi.sys,
6492 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
6493 # a Unix-style environment used on OS/2. (Note that the suffix makes some
6494 # names longer than 14 characters, the nominal maximum).
6496 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
6497 ansi-emx|ANSI.SYS color,
6498 am, bce, eo, mir, msgr, xon,
6499 colors#8, cols#80, it#8, lines#25, pairs#64,
6500 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6501 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
6502 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6503 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
6504 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
6505 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
6506 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
6507 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
6508 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6509 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
6510 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
6511 u9=\E[c, use=emx-base,
6512 # nice colors for Emacs (white on blue, mode line white on cyan)
6513 ansi-color-2-emx|ANSI.SYS color 2,
6514 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
6515 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
6516 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
6517 smul=\E[1;36;44m, use=ansi-emx,
6518 # nice colors for Emacs (white on black, mode line black on cyan)
6519 ansi-color-3-emx|ANSI.SYS color 3,
6520 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
6521 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
6522 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
6523 smul=\E[0;36;40m, use=ansi-emx,
6524 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
6526 cols#80, it#8, lines#24,
6527 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6528 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6529 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
6530 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
6531 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
6532 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
6537 # Use this for cygwin32 (tested with beta 19.1)
6538 # underline is colored bright magenta
6539 # shifted kf1-kf12 are kf11-kf22
6540 cygwinB19|ansi emulation for cygwin32,
6541 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6542 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6543 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6544 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6545 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6546 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6547 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
6550 # Use this for cygwin (tested with version 1.1.0).
6551 # I've combined pcansi and linux. Some values of course were different and
6552 # I've indicated which of these were and which I used.
6553 # Cheers, earnie_boyd@yahoo.com
6554 # several changes based on running with tack and comparing with older entry -TD
6555 # more changes from csw:
6557 # remove eo [erase overstrike with blank]
6558 # change clear was \E[H\E[J now \E[2J (faster?)
6561 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
6563 # add cub [cursor back param]
6564 # add cuf [cursor forward param]
6565 # add cuu [cursor up param]
6566 # add cud [cursor down param]
6567 # add hs [has status line]
6568 # add fsl [return from status line]
6569 # add tsl [go to status line]
6570 # add smacs [Start alt charset] (not sure if this works)
6571 # add rmacs [End alt charset] (ditto)
6572 # add smcup [enter_ca_mode] (save console; thanks Corinna)
6573 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
6574 # add kb2 [center of keypad]
6575 # add u8 [user string 8] \E[?6c
6576 # add el [clear to end of line] \E[K
6578 # cnorm [make cursor normal] not implemented
6579 # flash [flash] not implemented
6580 # blink [blink] not implemented very usefully in cygwin? \E[5m
6581 # dim [dim] not implemented very usefully in cygwin? \E[2m
6582 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
6583 # kNXT [shifted next key] not implemented
6584 # kPRV [shifted prev key] not implemented
6585 # khome [home key] really is \E[1~ NOT \E[H
6586 # tbc [clear tab stops] not implemented
6587 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
6588 # smpch [Start PC charset] is \E[11m, same as smacs
6589 # rmpch [End PC charset] is \E[10m, same as rmacs
6590 # mir [move in insert mode] fails in tack?
6591 # bce [back color erase] causes problems with change background color?
6592 # cvvis [make cursor very visible] causes a stackdump when testing with
6593 # testcurs using the output option? \E[?25h\E[?8c
6594 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
6595 # ech [erase characters param] broken \E[%p1%dX
6596 # kcbt [back-tab key] not implemented in cygwin? \E[Z
6599 # Remove cbt since it does not work in current cygwin
6600 # Add 'mir' and 'in' flags based on tack
6601 cygwin|ansi emulation for Cygwin,
6602 am, hs, mir, msgr, xon,
6603 colors#8, it#8, pairs#64,
6604 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6605 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
6606 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6607 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6608 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6609 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
6610 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
6611 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
6612 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6613 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6614 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6615 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6616 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6617 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6618 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
6619 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6620 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
6621 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
6622 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6623 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6624 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
6625 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
6626 vpa=\E[%i%p1%dd, use=vt102+enq,
6628 # I've supplied this so that you can help test new values and add other
6629 # features. Cheers, earnie_boyd@yahoo.com.
6631 # Some features are from pcansi. The op value is from linux. Function-keys
6632 # are from linux. These have been tested not to cause problems. xenl was in
6633 # this list, but DOES cause problems so it has been removed
6634 cygwinDBG|Debug Version for Cygwin,
6635 am, eo, mir, msgr, xon,
6636 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6637 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6638 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6639 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
6640 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6641 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6642 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6643 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6644 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
6645 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6646 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
6647 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6648 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
6649 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6650 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6651 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
6652 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6653 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6654 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
6655 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
6656 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6657 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6658 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
6659 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
6660 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
6665 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
6666 # encodings used by other x86 environments. All others are invented for DJGPP.
6667 # Oddly enough, while several combinations of modifiers are tabulated, there is
6668 # none for shifted cursor keys.
6720 # Ctrl-Delete \E[43~
6721 # Ctrl-Down Arrow \E[38~
6724 # Ctrl-Insert \E[42~
6725 # Ctrl-Left Arrow \E[39~
6726 # Ctrl-Page Down \E[46~
6727 # Ctrl-Page Up \E[45~
6728 # Ctrl-Right Arrow \E[40~
6729 # Ctrl-Up Arrow \E[37~
6745 # Alt-Down Arrow \E[60~
6749 # Alt-Left Arrow \E[61~
6750 # Alt-Page Down \E[68~
6751 # Alt-Page Up \E[67~
6752 # Alt-Right Arrow \E[62~
6753 # Alt-Up Arrow \E[59~
6782 djgpp|ansi emulation for DJGPP alpha,
6783 am, bce, msgr, xhp, xon, xt,
6784 colors#8, it#8, pairs#64,
6785 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6786 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6787 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
6788 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6789 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6790 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6791 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6792 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6793 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6794 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
6795 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6796 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
6797 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6798 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6799 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
6800 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
6801 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6802 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
6803 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6805 djgpp203|Entry for DJGPP 2.03,
6807 cols#80, it#8, lines#25,
6808 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
6811 djgpp204|Entry for DJGPP 2.04,
6813 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
6814 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6815 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
6816 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6817 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6818 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
6819 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6820 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6821 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
6822 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6823 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
6824 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6825 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6826 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
6827 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6828 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6832 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6833 # buggy. Another odd bug appears when displaying "~" in alternate character
6834 # set (the emulator spits out error messages). Compare with att6386 -TD
6835 uwin|U/Win 3.2 console,
6836 am, eo, in, msgr, xenl, xon,
6837 colors#8, it#8, ncv#58, pairs#64,
6838 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6839 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6840 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6841 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6842 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6843 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6844 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6845 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6846 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6847 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6848 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6849 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6850 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6851 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6852 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6853 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6855 #### Microsoft (miscellaneous)
6857 # This entry fits the Windows NT console when the _POSIX_TERM environment
6858 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6859 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6860 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6861 # systems is not, and (surprise!) they match very well.
6863 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6864 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6865 # are the installation instructions a pile of mind-numbing bureaucratese,
6866 # but the termcap entry is actually broken and unusable as given; the :do:
6867 # capability is misspelled "d".
6869 # To use this, you need to a bunch of environment variables:
6871 # SET _POSIX_TERM=on
6873 # SET TERMCAP=location of termcap file in POSIX file format
6874 # which is case-sensitive.
6875 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6878 # Important note: setting the TMP environment variable in POSIX style renders
6879 # it incompatible with a lot of other applications, including Visual C++. So
6880 # you should have a separate command window just for vi. All the other
6881 # variables may be permanently set in the Control Panel\System applet.
6883 # You can find out more about the restrictions of this facility at
6884 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6886 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6887 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6889 cols#80, it#8, lines#25,
6890 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6891 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6892 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6893 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6894 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6895 # From: jew@venus.sunquest.com
6896 # Date: 19 Feb 93 23:41:07 GMT
6897 # Here's a combination of ansi and vt100 termcap
6898 # entries that works nearly perfectly for me
6899 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6900 pcmw|PC running Microsoft Works,
6902 cols#80, it#8, lines#24, vt#3,
6903 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6904 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6905 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6906 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6907 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6908 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6909 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6910 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6911 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6912 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6913 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6916 # From: Federico Bianchi
6917 # This is the entry for the OpenNT terminal.
6918 # The ntconsole name is for backward compatability.
6919 # This is for OpenNT 2.0 and later.
6920 # Later OpenNT was renamed to Interix.
6922 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6923 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6924 # the documentation dates from 1.9.9e) -TD
6926 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6928 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6929 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6930 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6931 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6932 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6933 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6934 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6935 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6936 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6937 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6938 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6939 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6940 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6941 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6942 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6943 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6944 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6945 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6946 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6947 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6948 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6949 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6950 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6951 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6952 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6953 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6954 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6955 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6957 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6958 lines#35, use=opennt,
6960 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6961 lines#50, use=opennt,
6963 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6964 lines#60, use=opennt,
6966 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6967 lines#100, use=opennt,
6969 # OpenNT wide terminals
6970 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6971 cols#125, use=opennt,
6973 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6974 lines#35, use=opennt-w,
6976 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6977 lines#50, use=opennt-w,
6979 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6980 lines#60, use=opennt-w,
6982 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6983 cols#132, use=opennt,
6985 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6986 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6987 rmcup@, smcup@, use=opennt,
6989 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6990 lines#35, use=opennt-nti,
6992 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6993 lines#50, use=opennt-nti,
6995 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6996 lines#60, use=opennt-nti,
6998 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6999 lines#100, use=opennt-nti,
7001 ######## COMMON TERMINAL TYPES
7003 # This section describes terminal classes and maker brands that are still
7004 # quite common, but have proprietary command sets not blessed by ANSI.
7009 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7010 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7011 # Acer has a web site at http://www.acer.com.
7013 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7014 # His comments suggest they were shipped with the system.
7017 # (altos2: had extension capabilities
7018 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7019 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7020 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7021 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7022 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7023 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7024 # :HL=^AP\r:SP=\E[i:\
7025 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7026 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7027 # Comparison with the k* capabilities makes it obvious that the c* things are
7028 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7029 # :sr: was given as a boolean-- esr)
7030 altos2|alt2|altos-2|altos II,
7031 cols#80, it#8, lines#24, xmc#0,
7032 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7033 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7034 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7035 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
7036 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7037 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7038 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7039 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7040 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7041 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7042 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7043 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7044 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7045 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7046 # (altos3: had extension capabilities
7047 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7048 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7049 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7050 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7051 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7052 # :HL=^AP\r:SP=\E[i:\
7053 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7054 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7055 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7056 altos4|alt4|altos-4|altos IV,
7058 # (altos7: had extension capabilities:
7059 # :GG#0:GI=\EH8:GF=\EH7:\
7060 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7061 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7062 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7063 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7064 # Comparison with the k* capabilities makes it obvious that the c* things are
7065 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7066 # also made this entry relative to adm12 in order to give it an <sgr>. The
7067 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7068 altos7|alt7|altos VII,
7070 cols#80, lines#24, xmc#0,
7071 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7072 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7073 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7074 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7076 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7077 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7078 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7079 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7080 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7081 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7082 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7083 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7084 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
7085 rmir=\Er, smir=\Eq, use=adm+sgr,
7086 altos7pc|alt7pc|altos PC VII,
7087 kend=\ET, use=altos7,
7089 #### Hewlett-Packard (hp)
7092 # 8000 Foothills Blvd
7093 # Roseville, CA 95747
7094 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7095 # 1-(800)-633-3600 (General customer support)
7098 # As of March 1998, HP no longer has any terminals in production.
7099 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7100 # supported (they still have parts). So are the 2392a and 2394a.
7101 # See the WORKSTATION CONSOLES section for the 700s.
7104 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7105 hpgeneric|hp|hewlett-packard generic terminal,
7106 OTbs, OTpt, am, da, db, mir, xhp,
7107 cols#80, lines#24, lm#0, vt#6,
7108 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7109 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7110 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7111 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7112 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7115 hp110|hewlett-packard model 110 portable,
7116 lines#16, use=hpgeneric,
7118 hp+pfk+cr|hp function keys with CR,
7119 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7120 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7122 hp+pfk-cr|hp function keys w/o CR,
7123 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7126 # The hp2621s use the same keys for the arrows and function keys,
7127 # but not separate escape sequences. These definitions allow the
7128 # user to use those keys as arrow keys rather than as function
7130 hp+pfk+arrows|hp alternate arrow definitions,
7131 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7132 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7133 kll=\Eq\r, kri=\Es\r,
7135 hp+arrows|hp arrow definitions,
7136 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7137 kind=\ES, kll=\EF, kri=\ET,
7139 # Generic stuff from the HP 262x series
7141 hp262x|HP 262x terminals,
7143 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7144 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7145 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7146 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7147 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7148 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
7149 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7151 # Note: no <home> on HPs since that homes to top of memory, not screen.
7152 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7153 # transmit anything at all is to turn on the function key labels
7154 # with <smkx>, and even then the user has to hold down shift!
7155 # The default 2621 turns off the labels except when it has to to
7156 # enable the function keys. If your installation prefers labels
7157 # on all the time, or off all the time (at the "expense" of the
7158 # function keys), use 2621-nl or 2621-wl.
7160 # Note: there are newer ROMs for 2621's that allow you to set
7161 # strap A so the regular arrow keys xmit \EA, etc, as with the
7162 # 2645. However, even with this strap set, the terminal stops
7163 # xmitting if you reset it, until you unset and reset the strap!
7164 # Since there is no way to set/unset the strap with an escape
7165 # sequence, we don't use it in the default.
7166 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7167 hp2621-ba|2621 w/new rom and strap A set,
7168 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7170 # hp2621 with function labels. Most of the time they are off,
7171 # but inside vi, the function key labels appear. You have to
7172 # hold down shift to get them to xmit.
7173 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7174 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7178 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7179 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7180 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7181 use=hp+pfk+cr, use=hpgeneric,
7183 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7184 hp2621p|hp 2621 with printer,
7185 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7187 hp2621p-a|hp2621p with fn as arrows,
7188 use=hp+pfk+arrows, use=hp2621p,
7190 # hp2621 with k45 keyboard
7191 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7192 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7193 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7195 # 2621 using all 48 lines of memory, only 24 visible at any time.
7196 hp2621-48|48 line 2621,
7198 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7201 # 2621 with no labels ever. Also prevents vi delays on escape.
7202 hp2621-nl|hp 2621 with no labels,
7203 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7206 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7209 hp2621-nt|hp 2621 w/no tabs,
7212 # Hp 2624 B with 4 or 10 pages of memory.
7214 # Some assumptions are made with this entry. These settings are
7215 # NOT set up by the initialization strings.
7217 # Port Configuration
7222 # Terminal Configuration
7228 # Note: the 2624 DOES have a true <home>, believe it or not!
7230 # The 2624 has an "error line" to which messages can be sent.
7231 # This is CLOSE to what is expected for a "status line". However,
7232 # after a message is sent to the "error line", the next carriage
7233 # return is EATEN and the "error line" is turned back off again!
7234 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7236 # This entry supports emacs (and any other program that uses raw
7237 # mode) at 4800 baud and less. I couldn't get the padding right
7240 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7241 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7244 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
7245 use=hp+labels, use=scrhp,
7247 # This hp2626 entry does not use any of the fancy windowing stuff
7250 # Indeed, terminfo does not yet handle such stuff. Since changing
7251 # any window clears memory, it is probably not possible to use
7252 # this for screen opt.
7254 # ed is incredibly slow most of the time - I am guessing at the
7255 # exact padding. Since the terminal uses xoff/xon this is intended
7256 # only for cost computation, so that the terminal will prefer el
7257 # or even dl1 which is probably faster!
7259 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7260 # extra slow on the last line of the window.
7262 # The padding probably should be changed.
7264 hp2626|hp2626a|hp2626p|hp 2626,
7267 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7268 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7269 use=hp+labels, use=scrhp,
7271 # This entry is for sysline. It allocates a 23 line window with
7272 # a 115 line workspace for regular use, and a 1 line window for
7275 # This assumes port 2 is being used.
7276 # Turn off horizontal line, Create ws #1 with 115 lines,
7277 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7278 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7279 # Note that this clears the tabs so it must be done by tset before
7282 hp2626-s|hp 2626 using only 23 lines,
7285 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7286 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
7287 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7288 # Force terminal back to 24 lines after being 23.
7289 hp2626-ns|hp 2626 using all 24 lines,
7290 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
7292 # Various entries useful for small windows on 2626.
7293 hp2626-12|hewlett-packard 2626 12 lines,
7294 lines#12, use=hp2626,
7295 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7296 cols#40, lines#12, use=hp2626,
7297 hp2626-x40|hewlett-packard 2626 40 columns,
7298 cols#40, use=hp2626,
7299 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7300 lines#11, use=hp2626-s,
7303 # hp2627 color tubes from University of Wisconsin
7305 hp2627a-rev|hp 2627 with reverse video colors,
7306 cr=^M, cud1=^J, ht=^I, ind=^J,
7307 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
7308 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
7309 smul=\E&dD\E&v1S, use=hp2621-nl,
7310 hp2627a|hp 2627 color terminal with no labels,
7311 cr=^M, cud1=^J, ht=^I, ind=^J,
7312 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7313 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
7314 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7316 hp2627c|hp 2627 color (cyan) terminal with no labels,
7317 cr=^M, cud1=^J, ht=^I, ind=^J,
7318 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7319 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
7321 # hp2640a doesn't have the Y cursor addressing feature, and C is
7322 # memory relative instead of screen relative, as we need.
7325 cup@, rmkx@, smkx@, use=hp2645,
7327 hp2640b|hp2644a|hp 264x series,
7328 rmkx@, smkx@, use=hp2645,
7330 # (hp2641a: removed unknown :gu: -- esr)
7331 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7332 am, da, db, mir, xhp,
7334 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7335 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7336 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7337 if=/usr/share/tabset/std, il1=\EL, ind=^J,
7338 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7339 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7342 # This terminal should be used at 4800 baud or less. It needs padding for
7343 # plain characters at 9600, I guessed at an appropriate cr delay. It really
7344 # wants ^E/^F handshaking, but that doesn't work well even if you write
7345 # software to support it.
7346 hp2645|hp45|HP 2645 series,
7348 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
7349 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7350 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
7351 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
7353 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
7354 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
7355 # You should use this terminal at 4800 baud or less.
7356 hp2648|hp2648a|HP 2648a graphics terminal,
7357 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
7358 dch1=\EP$<7>, ip=$<5>, use=hp2645,
7360 # The HP 150 terminal is a fairly vanilla HP terminal, with the
7361 # clreol standout problem. It also has graphics capabilities and
7362 # a touch screen, which we don't describe here.
7363 hp150|hewlett packard Model 150,
7366 # HP 2382a terminals, "the little ones." They don't have any
7367 # alternate character set support and sending out ^N/^O will
7368 # leave the screen blank.
7369 hp2382a|hp2382|hewlett packard 2382a,
7373 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7375 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
7376 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
7378 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
7379 use=hp+pfk+arrows, use=hp2621-fl,
7381 # newer hewlett packard terminals
7383 newhpkeyboard|generic entry for HP extended keyboard,
7384 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7385 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7386 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
7387 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
7390 newhp|generic entry for new hewlett packard terminals,
7391 am, bw, mir, xhp, xon,
7392 cols#80, lines#24, pb#4800,
7393 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
7394 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
7395 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
7396 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
7397 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
7398 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
7399 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
7400 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
7401 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
7402 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
7403 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
7404 tbc=\E3, use=newhpkeyboard,
7406 memhp|memory relative addressing for new HP ttys,
7408 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
7409 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
7410 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
7411 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
7413 scrhp|screen relative addressing for new HP ttys,
7414 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
7415 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
7416 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
7417 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
7418 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
7420 # (hp+labels: added label values from a BRL termcap -- esr)
7421 hp+labels|"standard" label info for new HP ttys,
7423 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
7424 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7425 rmln=\E&j@, smln=\E&jB,
7427 hp+printer|"standard" printer info for HP ttys,
7428 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
7431 # The new hp2621b is kind of a cross between the old 2621 and the
7432 # new 262x series of machines. It has dip-switched options.
7433 # The firmware has a bug in it such that if you give it a null
7434 # length label, the following character is eaten!
7435 hp2621b|hp 2621b with old style keyboard,
7436 lh#1, lm#48, lw#8, nlab#8,
7437 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7438 kind=\ET, kll=\EF, kri=\ES,
7439 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
7440 smln=\E&jB, use=hp2621,
7442 hp2621b-p|hp 2621b with printer,
7443 use=hp+printer, use=hp2621b,
7445 # hp2621b - new 2621b with new extended keyboard
7446 # these are closer to the new 26xx series than the other 2621b
7447 hp2621b-kx|hp 2621b with extended keyboard,
7448 use=newhpkeyboard, use=hp2621b,
7450 hp2621b-kx-p|hp 2621b with new keyboard & printer,
7451 use=hp+printer, use=hp2621b-kx,
7453 # Some assumptions are made in the following entries.
7454 # These settings are NOT set up by the initialization strings.
7456 # Port Configuration
7457 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
7459 # Terminal Configuration
7460 # InhHndShk(G)=Yes InhDC2(H)=Yes
7461 # XmitFnctn(A)=No InhEolWrp=No
7464 # Hp 2622a & hp2623a display and graphics terminals
7466 hp2622|hp2622a|hp 2622,
7469 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
7471 # The 2623 is a 2622 with extra graphics hardware.
7472 hp2623|hp2623a|hp 2623,
7475 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
7476 use=hp+printer, use=hp2624,
7478 # The hewlett packard B can have an optional extra 6 pages of memory.
7479 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
7482 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
7483 lm#240, use=hp2624b-p,
7485 # Color manipulations for HP terminals
7486 hp+color|hp with colors,
7488 colors#16, ncv#17, pairs#7,
7489 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
7490 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
7491 op=\E&v0S, scp=\E&v%p1%dS,
7493 # <is2> sets the screen to be 80 columns wide
7494 hp2397a|hp2397|hewlett packard 2397A color terminal,
7495 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
7497 # HP 700/44 Setup parameters:
7498 # Terminal Mode HP-PCterm
7499 # Inhibit Auto Wrap NO
7500 # Status Line Host Writable
7501 # PC Character Set YES
7502 # Twenty-Five Line Mode YES
7503 # XON/XOFF @128 or 64 (sc)
7504 # Keycode Mode NO or YES (sc)
7505 # Backspace Key BS or BS/DEL
7507 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
7508 # \E\\? does not turn off keycode mode
7509 # <smsc> sets alternate start/stop; keycode on
7510 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
7513 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
7514 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
7515 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7516 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7517 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
7519 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
7520 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7521 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
7522 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
7523 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
7524 kpp=\E[5~, rmam=\E[?7l,
7525 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
7526 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
7527 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
7528 smul=\E[4m, xoffc=g, xonc=e,
7530 # (hp2392: copied <rmir> here from hpex -- esr)
7533 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
7534 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
7535 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
7536 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
7539 hpsub|hp terminals -- capability subset,
7540 am, da, db, mir, xhp, xon,
7542 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7543 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
7544 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
7545 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
7546 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
7547 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
7550 # May be used for most 24 x 80 hp terminals,
7551 # but has no padding added, so may allow runover in some terminals at high
7552 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
7553 # hp98x5 terminal emulators or hp98x6 consoles.
7554 # Adds xy-cursor addressing, vertical cursor addressing, home,
7555 # last line, and underline capabilities.
7557 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
7558 # moved <rmir> here from hpsub -- esr)
7559 hpex|hp extended capabilites,
7560 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
7561 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
7562 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
7564 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
7565 hp2|hpex2|hewlett-packard extended capabilities newer version,
7566 am, da, db, mir, xhp,
7567 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
7568 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7569 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7570 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7571 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7572 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7573 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7574 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7575 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7576 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
7577 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7578 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7579 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7580 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
7581 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7582 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
7583 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
7584 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7587 # From: <ddavis@ic.berkeley.edu>
7588 hp236|hp236 internal terminal emulator,
7591 clear=\EF, cnorm=\EDE, cub1=^H,
7592 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
7593 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
7594 sgr0=\ECI, smso=\EBI,
7596 # This works on a hp300 console running Utah 4.3 BSD
7597 # From: Craig Leres <leres@okeeffe.berkeley.edu>
7598 hp300h|HP Catseye console,
7599 OTbs, am, da, db, mir, xhp,
7600 cols#128, lines#51, lm#0, xmc#0,
7601 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7602 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7603 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7604 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
7605 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7606 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
7607 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
7609 # From: Greg Couch <gregc@ernie.berkeley.edu>
7610 hp9837|hp98720|hp98721|HP 9000/300 workstations,
7611 OTbs, am, da, db, mir, xhp,
7612 cols#128, it#8, lines#46, lm#0,
7613 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
7614 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7615 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7616 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
7617 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7618 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
7619 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
7620 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
7621 tbc=\E3, vpa=\E&a%p1%dY,
7622 # HP 9845 desktop computer from BRL
7623 # (hp9845: removed unknown capability :gu: -- esr)
7625 OTbs, am, da, db, eo, mir, xhp,
7627 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7628 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7629 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
7630 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7631 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
7632 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
7633 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
7634 hp98550|hp98550a|HP 9000 Series 300 color console,
7635 OTbs, am, da, db, mir, xhp,
7636 cols#128, it#8, lines#49, lm#0,
7637 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
7638 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7639 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
7640 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7641 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
7642 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7643 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
7644 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
7645 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
7646 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
7647 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7648 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
7649 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7650 # From: Victor Duchovni <vic@fine.princeton.edu>
7651 # (hp700-wy: removed obsolete ":nl=^J:";
7652 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
7653 hp700-wy|HP700/41 emulating wyse30,
7654 OTbs, am, bw, mir, msgr,
7655 cols#80, it#8, lines#24, xmc#1,
7656 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7657 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7658 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
7659 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
7660 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
7661 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
7662 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
7663 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
7664 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
7665 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
7666 hp70092|hp70092a|hp70092A|HP 700/92,
7668 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
7669 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
7670 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
7671 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
7672 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7673 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7674 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7675 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7676 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7677 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7678 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
7679 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7680 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
7681 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7683 bobcat|sbobcat|HP 9000 model 300 console,
7684 am, da, db, mir, xhp,
7685 cols#128, it#8, lines#47, xmc#0,
7686 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7687 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
7688 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
7689 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7690 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
7691 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
7692 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
7693 gator-t|HP 9000 model 237 emulating extra-tall AAA,
7694 lines#94, use=gator,
7695 gator|HP 9000 model 237 emulating AAA,
7697 cols#128, it#8, lines#47,
7698 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
7699 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
7700 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
7701 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
7702 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
7703 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7704 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
7705 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7706 gator-52|HP 9000 model 237 emulating VT52,
7707 cols#128, lines#47, use=vt52,
7708 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
7709 lines#94, use=gator-52,
7713 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
7716 # Honeywell Bull terminal. Its cursor and function keys send single
7717 # control characters and it has standout/underline glitch. Most programs
7718 # do not like these features/bugs. Visual bell is realized by flashing the
7719 # "keyboard locked" LED.
7720 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
7722 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
7723 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
7724 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
7725 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
7726 dku7003|Honeywell Bull DKU 7003 all features described,
7729 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
7730 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7733 #### Lear-Siegler (adm)
7735 # These guys are long since out of the terminals business, but
7736 # in 1995 many current terminals still have an adm type as one of their
7737 # emulations (usually their stupidest, and usually labeled adm3, though
7738 # these `adm3' emulations normally have adm3a+ capabilities).
7740 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
7741 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
7742 # was being held to ground would trigger a send of the top line on the screen.
7743 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
7744 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
7745 # for clearing up this point.)
7747 adm1a|adm1|lsi adm1a,
7750 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7751 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
7756 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7757 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7758 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
7759 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
7760 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
7764 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
7765 # The following ADM-3A switch settings are assumed for normal operation:
7766 # SPACE U/L_DISP CLR_SCRN 24_LINE
7767 # CUR_CTL LC_EN AUTO_NL FDX
7768 # Other switches may be set for operator convenience or communication
7769 # requirements. I recommend
7770 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
7772 # Most of these terminals required an option ROM to support lower case display.
7773 # Open the case and look at the motherboard; if you see an open 24-pin DIP
7774 # socket, you may be out of luck.
7776 # (adm3a: some capabilities merged in from BRl entry -- esr)
7780 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
7781 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7782 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
7786 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
7789 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
7790 rmso=\EG, smso=\EG, use=adm3a+,
7791 # A lot of terminals other than adm11s use these. Wherever you see
7792 # use=adm+sgr with some of its capabilities disabled, try the
7793 # disabled ones. They may well work but not have been documented or
7794 # expressed in the using entry. We'd like to cook up an <sgr> but the
7795 # <rmacs>/<smacs> sequences of the using entries vary too much.
7796 adm+sgr|adm style highlight capabilities,
7797 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
7798 smso=\EG4, smul=\EG8,
7799 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
7800 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
7801 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
7802 # be ^Z, according to his entry.
7803 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
7804 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
7807 OTkn#8, cols#80, lines#24,
7808 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
7809 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7810 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
7811 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7812 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7813 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
7815 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
7816 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
7817 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
7818 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
7819 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
7820 # via BRL. That entry asserted <xmc#1>, but I've left that out because
7821 # neither earlier nor later ADMSs have it -- esr)
7823 # You will need to get into the supervisor setup before you can set
7824 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
7825 # see a lot more setup options.
7827 # While in supervisor setup you can also use following codes:
7829 # Ctrl-P Personality character selections (configure for example what
7830 # arrow keys send, if I recall correctly)
7831 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7832 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7833 # Ctrl-B Binary setup (probably not needed. I think that everything can
7834 # be set using normal setup)
7835 # Ctrl-A Answerback mode (enter answerback message)
7836 # Ctrl-U User friendly mode (normal setup)
7837 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7838 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7839 # Ctrl-R Reads both setup and functions keys from NVM.
7840 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7842 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7843 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7844 # bps works fine with hardware flow control.
7846 # The following null-modem cable should fix this and enable you to use
7847 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7848 # set ADM-12+ for DTR handshaking from supervisor setup.
7861 OTbs, OTpt, am, mir,
7862 OTug#1, cols#80, it#8, lines#24,
7863 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7864 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7865 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7866 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7867 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7868 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7869 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7871 # (adm20: removed obsolete ":kn#7:" -- esr)
7872 adm20|lear siegler adm20,
7874 cols#80, it#8, lines#24,
7875 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7876 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7877 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7878 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7880 adm21|lear siegler adm21,
7882 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
7883 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=^J, invis@, kbs=^H,
7884 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
7885 use=adm+sgr, use=adm3a,
7886 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7887 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7888 # removed bogus-looking \200 from before <cup>. -- esr)
7892 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7893 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7894 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7895 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7896 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7897 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7898 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7899 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7900 # ADM 31 DIP Switches
7902 # This information comes from two versions of the manual for the
7903 # Lear-Siegler ADM 31.
7907 # +-||||-------------------------------------+
7922 # +----------------------------------------------+
7923 # front of case (keyboard)
7925 # S1 - Data Rate - Modem
7926 # S2 - Data Rate - Printer
7927 # ------------------------
7929 # -------------------
7947 # S3 - Interface/Printer/Attributes
7948 # ---------------------------------
7949 # Printer Busy Control
7952 # off off off Busy not active, CD disabled
7953 # off off on Busy not active, CD enabled
7954 # off on off Busy active on J5-20, CD disabled
7955 # on off off Busy active on J5-19, CD disabled - Factory Set.
7956 # on off on Busy active on J5-19, CD enabled
7958 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7960 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7962 # sw6 ON enables printer BUSY active LOW - Factory Setting
7963 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7965 # sw7 ON - steady cursor - Factory Setting
7966 # OFF - blinking cursor
7968 # sw8 ON causes selected attribute character to be displayed
7969 # OFF causes SPACE to be displayed instead - Factory Setting
7975 # sw4 sw1 sw2 sw3 sw4
7976 # ---------------------------
7977 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7978 # Current Loop disabled - Factory Setting
7979 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7981 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7982 # Current Loop Disabled
7984 # sw5 ON disables dot stretching mode - Factory Setting
7985 # OFF enables dot stretching mode
7986 # sw6 ON enables blanking function
7987 # OFF enables underline function - Factory Setting
7988 # sw7 ON causes NULLS to be displayed as NULLS
7989 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7991 # S5 - Word Structure
7992 # -------------------
7993 # sw1 ON enables BREAK key - Factory Setting
7994 # OFF disables BREAK key
7995 # sw2 ON selects 50Hz monitor refresh rate
7996 # OFF selects 60Hz monitor refresh rate - Factory Setting
7998 # Modem Port Selection
8001 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
8002 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
8003 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
8004 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
8005 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
8006 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8007 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8008 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8010 # sw6 ON sends bit 8 a 1 (mark)
8011 # OFF sends bit 8 as 0 (space) - Factory Setting
8012 # sw7 ON selects Block Mode
8013 # OFF selects Conversation Mode - Factory Setting
8014 # sw8 ON selects Full Duplex operation
8015 # OFF selects Half Duplex operation - Factory Setting
8019 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8021 # Printer Port Selection
8022 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8024 # sw8 ON enables Printer Port
8025 # OFF disables Printer Port - Factory Setting
8027 # S7 - Polling Address
8028 # --------------------
8029 # sw1-7 Establish ASCII character which designates terminal polling address
8031 # OFF = logic 1 - Factory Setting
8032 # sw8 ON enables Polling Option
8033 # OFF disables Polling Option - Factory Setting
8036 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8038 # This adm31 entry uses underline as the standout mode.
8039 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8040 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8041 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8042 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8043 adm31|lsi adm31 with sw6 set for underline mode,
8046 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8047 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8048 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
8049 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8050 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8051 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8052 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8053 adm31-old|o31|old adm31,
8054 rmul@, smso=\EG4, smul@, use=adm31,
8055 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8059 if=/usr/share/tabset/vt100,
8060 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
8062 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8066 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8067 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8068 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8069 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
8070 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
8071 smir=\Eq, smul@, use=adm+sgr,
8072 # The following termcap for the Lear Siegler ADM-42 leaves the
8073 # "system line" at the bottom of the screen blank (for those who
8074 # find it distracting otherwise)
8075 adm42-ns|lsi adm-42 with no system line,
8076 cbt=\EI\EF \011, clear=\E;\EF \011,
8077 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8078 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8079 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8080 smir=\Eq\EF \011, use=adm42,
8081 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8082 # The insert mode of this terminal is commented out because it's broken for our
8083 # purposes in that it will shift the position of every character on the page,
8084 # not just the cursor line!
8085 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8086 adm1178|1178|lsi adm1178,
8088 cols#80, lines#24, xmc#1,
8089 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
8090 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8091 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8092 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
8093 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
8094 sgr0=\E), smso=\EG4, smul=\EG1,
8098 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8099 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8100 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8102 # ComputerVision Services
8103 # 500 Old Connecticut Path
8107 # Standout mode is dim reverse-video.
8108 pt100|pt200|wren|fenix|prime pt100/pt200,
8110 cols#80, it#8, lines#24,
8111 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
8112 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8113 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8114 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8115 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8116 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
8117 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
8118 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8120 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
8121 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8122 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8124 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8126 rmso@, smso@, use=pt100,
8127 pt250w|Prime PT250 in 132-column mode,
8128 rmso@, smso@, use=pt100w,
8133 # 3475-A North 1st Street
8135 # Vox: (800)-457-4447
8136 # Fax: (408)-473-1510
8137 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8139 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8140 # group and production division.
8142 # Discontinued Qume models:
8144 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8145 # built to replace them, and a qvt119+ which was a 101+ with available wide
8146 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8147 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8148 # ANSI-compatible terminals with the qvt323 and qvt61.
8150 # Current Qume models (as of February 1995):
8152 # All current Qume terminals have ANSI-compatible operation modes.
8153 # Qume is still producing the qvt62, which features emulations for other
8154 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8155 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8156 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8157 # model is the qvt520, which is vt420-compatible.
8159 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8161 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8162 # setup mode. Shift-s should be a configuration save to NVRAM.
8164 qvt101|qvt108|qume qvt 101 and QVT 108,
8167 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8168 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8169 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8170 # What seems to be going on here is that this entry was designed so that
8171 # the normal highlight is bold and standout is dim plus something else
8172 # (reverse-video maybe? But then, are there two <rev> sequences?)
8174 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8175 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8176 qvt101+|qvt101p|qume qvt 101 PLUS product,
8178 cols#80, lines#24, xmc#0,
8179 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
8180 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8181 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8182 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8183 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8184 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8185 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8186 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8187 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8188 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8189 qvt102|qume qvt 102,
8190 cnorm=\E., use=qvt101,
8191 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8192 qvt103|qume qvt 103,
8194 cols#80, it#8, lines#24, vt#3,
8195 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8196 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
8197 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8198 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8199 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8200 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8201 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8202 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8203 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8204 rmso=\E[m$<2>, rmul=\E[m$<2>,
8205 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8206 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
8207 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8208 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8209 qvt103-w|qume qvt103 132 cols,
8211 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8212 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8214 cols#80, lines#24, xmc#0,
8215 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
8216 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8217 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8218 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
8219 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
8220 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8221 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8222 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8223 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8224 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8225 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8226 lines#25, use=qvt119+,
8227 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8229 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8230 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8231 lines#25, use=qvt119+,
8232 qvt203|qvt203+|qume qvt 203 Plus,
8233 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8234 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8235 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8236 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8237 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8239 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8241 # Since a command is present for enabling 25 data lines,
8242 # a specific terminfo entry may be generated for the 203.
8243 # If one is desired for the QVT 119 PLUS then 25 lines must
8244 # be selected in the status line (setup line 9).
8246 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8248 is2=\E[=40h\E[?3l, use=qvt203,
8249 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8251 rs2=\E[?3h\E[=40h, use=qvt203,
8253 #### Televideo (tvi)
8256 # 550 East Brokaw Road
8257 # PO Box 49048 95161
8259 # Vox: (408)-954-8333
8260 # Fax: (408)-954-0623
8263 # These require incredible amounts of padding.
8265 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8266 # Televideo terminals are ANSI and PC-ANSI compatible.
8268 tvi803|televideo 803,
8269 clear=\E*$<10>, use=tvi950,
8271 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8272 # Switch settings are:
8293 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8309 # U do CR/LF when CR received
8310 # D do CR when CR received
8332 # S2 6 Cursor down key
8336 # S2 7 Screen colour
8340 # S2 8 DSR status (pin 6)
8344 # S2 9 DCD status (pin 8)
8348 # S2 10 DTR status (pin 20)
8351 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
8352 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
8353 tvi910|televideo model 910,
8355 cols#80, it#8, lines#24, xmc#1,
8356 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8357 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
8358 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
8359 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
8360 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
8361 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8362 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8363 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
8364 # From: Alan R. Rogers <rogers%albany@csnet-relay>
8365 # as subsequently hacked over by someone at SCO
8366 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
8368 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
8371 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
8372 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
8373 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
8374 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
8377 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
8378 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
8379 # D U D D 8O1 D U U U 8E2
8381 # S1 9 Autowrap (U = on, D = off)
8382 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
8383 # S2 1 Mode (U = block, D = conversational)
8384 # S2 2 Duplex (U = half, D = full)
8385 # S2 3 Hertz (U = 50, D = 60)
8386 # S2 4 Edit mode (U = local, D = duplex)
8387 # S2 5 Cursor type (U = underline, D = block)
8388 # S2 6 Cursor down key (U = send ^J, D = send ^V)
8389 # S2 7 Screen colour (U = green on black, D = black on green)
8390 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
8391 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
8392 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
8394 tvi910+|televideo 910+,
8395 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
8396 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
8397 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
8398 ll=\E=7\s, use=tvi910,
8400 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
8401 # <khome> from BRL entry -- esr)
8402 tvi912|tvi914|tvi920|old televideo 912/914/920,
8403 OTbs, OTpt, am, msgr,
8404 cols#80, it#8, lines#24, xmc#1,
8405 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8406 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8407 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
8408 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
8409 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8410 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8411 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8412 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
8414 # We got some new tvi912c terminals that act really weird on the regular
8415 # termcap, so one of our gurus worked this up. Seems that cursor
8416 # addressing is broken.
8417 tvi912cc|tvi912 at cowell college,
8420 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
8421 # From: Benjamin C. W. Sittler
8423 # Someone has put a scanned copy of the manual online at:
8424 # http://vt100.net/televideo/912b-om/
8426 # These terminals were produced ca. 1979, and had a 12" monochrome
8427 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
8428 # ASCII, and were generally similar to adm3a but with attributes
8429 # (including some with magic cookies), fancy half-duplex mode, and
8432 # Some operations reqire truly incredible amounts of padding. The
8433 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
8434 # are so slow as to be nearly unusable.
8436 # There may or may not have been a separate, earlier series of 912/920
8437 # terminals (without the "B" and "C" suffix); I have never seen one,
8438 # and the manual only describes the "B" and "C" series. The 912 and 920
8439 # are quite distinct from the 914 and 924, which were much nicer non-
8440 # magic-cookie terminals similar to the 950.
8442 # This is a new description for the following TeleVideo terminals,
8443 # distinguished chiefly by their keyboards:
8445 # TVI-912B - very odd layout, no function keys (84 keys)
8446 # TVI-920B - typewriter layout, no function keys (103 keys)
8447 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
8448 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
8450 # To choose a setting for the TERM variable, start with the model:
8452 # Model || base name
8453 # ----------||-----------
8454 # TVI-912B || tvi912b
8455 # TVI-912C || tvi912c
8456 # TVI-920B || tvi920b
8457 # TVI-920C || tvi920c
8459 # Then add a suffix from the following table describing installed options
8460 # and how you'd like to use the terminal:
8462 # Use Video | Second | Visual | Magic | Page || feature
8463 # Attributes | Page | Bell | Cookies | Print || suffix
8464 # ------------|--------|--------|---------|-------||---------
8465 # No | No | N/A | N/A | No || -unk
8466 # No | No | N/A | N/A | Yes || -p
8467 # No | Yes | No | N/A | No || -2p-unk
8468 # No | Yes | No | N/A | Yes || -2p-p
8469 # No | Yes | Yes | N/A | No || -vb-unk
8470 # No | Yes | Yes | N/A | Yes || -vb-p
8471 # Yes | No | N/A | No | N/A ||
8472 # Yes | No | N/A | Yes | N/A || -mc
8473 # Yes | Yes | No | No | N/A || -2p
8474 # Yes | Yes | No | Yes | N/A || -2p-mc
8475 # Yes | Yes | Yes | No | N/A || -vb
8476 # Yes | Yes | Yes | Yes | N/A || -vb-mc
8478 # So e.g. a model 920 C with second page memory option, visual bell
8479 # and no magic cookies would be tvi920c-vb; a model 912 B without the
8480 # second page memory option and using magic cookies would be
8485 # At 9600 baud, the terminal is prone to overflow its input buffer
8486 # during complex operations (insert/delete
8487 # character/line/screen/page), and it does not signal this over the
8488 # RS232 cable. The typical symptom of an overrun is that the terminal
8489 # starts beeping, and output becomes garbled.
8491 # The padding delays in this terminfo were derived using tack(1)
8492 # running on a Linux box connected to a TVI-920C with a later-model
8493 # (A49C1-style) ROM running at 9600 baud, so your mileage may
8494 # vary. The numbers below seem to give the terminal enough time so
8495 # that it doesn't overflow its input buffer and start losing
8500 # If you want to use the FUNCT key on a tvi912[bc], use the
8501 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
8502 # the following table (these also work on the 920 series):
8504 # Unshifted Function Keys:
8506 # Key | capname|| Equivalent
8507 # -----|--------||------------
8508 # F1 | <kf1> || FUNCT + @
8509 # F2 | <kf2> || FUNCT + A
8510 # F3 | <kf3> || FUNCT + B
8511 # F4 | <kf4> || FUNCT + C
8512 # F5 | <kf5> || FUNCT + D
8513 # F6 | <kf6> || FUNCT + E
8514 # F7 | <kf7> || FUNCT + F
8515 # F8 | <kf8> || FUNCT + G
8516 # F9 | <kf9> || FUNCT + H
8517 # F10 | <kf10> || FUNCT + I
8518 # F11 | <kf11> || FUNCT + J
8520 # Shifted Function Keys:
8522 # SHIFT + Key | capname|| Equivalent
8523 # -------------|--------||------------
8524 # SHIFT + F1 | <kf12> || FUNCT + `
8525 # SHIFT + F2 | <kf13> || FUNCT + a
8526 # SHIFT + F3 | <kf14> || FUNCT + b
8527 # SHIFT + F4 | <kf15> || FUNCT + c
8528 # SHIFT + F5 | <kf16> || FUNCT + d
8529 # SHIFT + F6 | <kf17> || FUNCT + e
8530 # SHIFT + F7 | <kf18> || FUNCT + f
8531 # SHIFT + F8 | <kf19> || FUNCT + g
8532 # SHIFT + F9 | <kf20> || FUNCT + h
8533 # SHIFT + F10 | <kf21> || FUNCT + i
8534 # SHIFT + F11 | <kf22> || FUNCT + j
8536 # PORTS AND SWITCH SETTINGS
8538 # Here are the switch settings for the TVI-912B/TVI-920B and
8539 # TVI-912C/TVI-920C:
8541 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
8542 # 2: 9600 3: 4800 4: 2400 5: 1200
8543 # 6: 600 7: 300 8: 150 9: 75
8546 # S2 UART/Terminal options:
8548 # 1: Not used Not allowed
8549 # 2: Alternate character set Standard character set
8550 # 3: Full duplex Half duplex
8551 # 4: 50 Hz refresh 60 Hz refresh
8552 # 5: No parity Send parity
8553 # 6: 2 stop bits 1 stop bit
8554 # 7: 8 data bits 7 data bits
8555 # 8: Not used Not allowed on Rev E or lower
8556 # 9: Even parity Odd parity
8557 # 10: Steady cursor Blinking cursor
8558 # (On Rev E or lower, use W25 instead of switch 10.)
8560 # S5 UART/Terminal options:
8562 # 1: P3-6 Not connected DSR received on P3-6
8563 # 2: P3-8 Not connected DCD received on P3-8
8565 # 3 Open, 4 Open: P3-20 Not connected
8566 # 3 Open, 4 Closed: DTR on when terminal is on
8567 # 3 Closed, 4 Open: DTR is connected to RTS
8568 # 3 Closed, 4 Closed: Not allowed
8570 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
8571 # all data transmitted out of the modem port (P3) will also be
8572 # transmitted out of the printer port (P4).
8574 # 6 Open, 7 Open: Not allowed
8575 # 6 Open, 7 Closed: 20ma current loop input
8576 # 6 Closed, 7 Open: RS232 input
8577 # 6 Closed, 7 Closed: Not allowed
8580 # If the jumper is installed, the effect will occur (the next time the terminal
8583 # S4/W31: Enables automatic LF upon receipt of CR from
8584 # remote or keyboard.
8585 # S4/W32: Enables transmission of EOT at the end of Send. If not
8586 # installed, a carriage return is sent.
8587 # S4/W33: Disables automatic carriage return in column 80.
8588 # S4/W34: Selects Page Print Mode as initial condition. If not
8589 # installed, Extension Mode is selected.
8591 # NON-STANDARD CAPABILITIES
8593 # Sending <u9> or <u7> returns a cursor position report in the format
8594 # YX\r, where Y and X are as in <cup>. This format is described in
8595 # <u8> and <u6>, but it's not clear how one should write an
8596 # appropriate scanf string, since we need to subtract %' ' from the
8597 # character after reading it. The <u9> capability is used by tack(1)
8598 # to synchronize during padding tests, and seems to work for that
8601 # This description also includes the obsolete termcap capabilities
8602 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
8604 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
8606 # The FUNCT modifier actually works with every normal key by sending
8607 # ^AX\r, where X is the sequence normally sent by that key. This is a
8608 # sort of meta key not currently describable in terminfo.
8610 # There are quite a few other keys (especially on the 920 models,) but
8611 # they are for the most part only useful in block mode.
8613 # These terminals have lots of forms manipulation features, mainly
8614 # useful in block mode, including "clear X to nulls" (vs. "clear X to
8615 # spaces"; nulls are sentinels for "send X" operations); "send X"
8616 # operations for uploading all or part of the screen; and block-mode
8617 # editing keys (they don't send escape sequences, but manipulate video
8618 # memory directly). Block mode is used for local editing, and protect
8619 # mode (in conjunction with the "write protect" attribute,
8620 # a.k.a. half-intensity outside of protect mode) is used to control
8621 # which parts of the screen are edited/sent/printed (by <mc0>).
8623 # There are at least two major families of ROM, "early" and
8624 # A49B1/A49C1; the major difference seems to be that the latter ROMs
8625 # support a few extra escape sequences for manipulating the off-screen
8626 # memory page, and for sending whole pages back to the host (mainly
8627 # useful in block mode.) The descriptions in this file don't use any
8628 # of those sequences: set cursor position including page (\E-PYX,
8629 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
8630 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
8631 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
8632 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
8633 # are as in <cup>, and some "send page" features mainly useful for
8634 # forms manipulation.
8636 # The keyboard enable (\E") and disable (\E#) sequences are unused,
8637 # except that a terminal reset (<is2>) enables the keyboard.
8639 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
8640 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
8644 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
8645 # sequences (I infer that in some TeleVideo terminal they may invert
8646 # and uninvert the display) so the <flash> sequence given here is a
8647 # cheesy page-flip instead.
8649 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
8650 # tack(1), so it is not included in the descriptions below.
8652 # It's not clear whether auto_left_margin (<bw>) flag should be set
8653 # for these terminals; tack says yes, so it is set here, but this
8654 # differs from other descriptions I've seen.
8656 # Extension print mode (<mc5>) echoes all characters to the printer
8657 # port [in addition to displaying them] except for the page print mode
8658 # sequence (<mc4>); this is a slight violation of the terminfo
8659 # definition for <mc5> but I don't expect it to cause problems. We
8660 # reset to page print mode in <rs1> since it may have been enabled
8663 # The descriptions with plus signs (+) are building blocks.
8665 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
8667 cols#80, it#8, lines#24,
8668 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8669 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
8670 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
8671 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
8672 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
8673 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
8674 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
8675 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
8676 u7=\E?, u8=%c%c\r, u9=\E?,
8678 # This isn't included in the basic capabilities because it is
8679 # typically unusable in combination with the full range of video
8680 # attributes, since the magic cookie attributes turn into ASCII
8681 # control characters, and the half-intensity ("protected") attribute
8682 # converts all affected characters to spaces.
8684 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
8687 # This uses half-intensity mode (<dim>) for standout (<smso>), and
8688 # exposes no other attributes (half-intensity is the only attribute
8689 # that does not generate a magic cookie.)
8691 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
8693 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
8696 # Full magic-cookie attribute support, with half-intensity reverse
8697 # video for standout. Note that we add a space in the <dim> sequence
8698 # to give a consistent magic-cookie count. Also note that <sgr> uses
8699 # backspacing (in the TVI-supported order) to apply all requested
8700 # attributes with only a single magic cookie.
8702 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
8704 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
8706 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
8707 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
8709 # This uses the second page memory option to save & restore screen
8710 # contents. If your terminal is missing the option, this description
8711 # should still work, but that has not been tested.
8713 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
8714 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
8715 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
8717 # This simulates flashing by briefly toggling to the other page
8720 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
8721 bel=\EK$<100>\EK, use=tvi912b+2p,
8723 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
8725 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
8726 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
8727 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
8728 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
8729 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8730 kf8=^AG\r, kf9=^AH\r,
8732 # Combinations of the basic building blocks
8734 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
8735 use=tvi912b+2p, use=tvi912b-unk,
8737 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
8738 use=tvi912b+vb, use=tvi912b-unk,
8740 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
8741 use=tvi912b+printer, use=tvi912b-unk,
8743 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
8744 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
8746 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
8747 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
8749 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
8750 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
8752 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
8753 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
8755 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
8756 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
8758 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
8759 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
8761 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
8762 use=tvi912b+dim, use=tvi912b-unk,
8764 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
8765 use=tvi912b+mc, use=tvi912b-unk,
8767 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
8768 use=tvi920b+fn, use=tvi912b-unk,
8770 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
8771 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
8773 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
8774 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
8776 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
8777 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
8779 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
8780 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
8783 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
8784 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
8787 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
8788 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
8791 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
8792 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
8795 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
8796 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
8799 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
8800 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
8803 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
8804 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
8806 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
8807 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
8809 # Televideo 921 and variants
8810 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
8811 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
8812 # also added empty <acsc> to suppress tic warning -- esr)
8813 tvi921|televideo model 921 with sysline same as page & real vi function,
8814 OTbs, OTpt, am, hs, xenl, xhp,
8815 cols#80, lines#24, xmc#0,
8816 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8817 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8818 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8819 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
8820 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
8821 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
8822 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
8823 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
8824 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
8825 # without the beeper
8826 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
8827 # also added empty <acsc> to suppress tic warning -- esr)
8828 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
8830 cols#80, lines#24, xmc#0,
8831 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8832 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8833 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8834 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8835 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8836 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8837 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8838 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8839 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8840 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8841 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8842 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8843 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8844 kil1=\EE$<2*/>, use=tvi92B,
8846 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8847 # in from a BSD termcap file because it looks like they do something the
8848 # old ones skip -- esr)
8849 tvi924|televideo tvi924,
8850 am, bw, hs, in, mir, msgr, xenl, xon,
8851 cols#80, it#8, lines#24, wsl#80, xmc#0,
8852 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8853 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8854 cub1=^H, cud1=^V, cuf1=^L,
8855 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8856 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8857 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8858 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8859 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8860 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8861 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8862 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8863 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8864 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8865 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8866 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8867 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8870 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8872 # Here are the settings for the external (baud) switches (S1):
8875 # 7 8 9 10 [Printer]
8876 # 1 2 3 4 [Main RS232]
8877 # -----------------------------------------------------
8896 # Settings for word length and stop-bits (S1)
8898 # Position Description
8900 # ---------------------------
8907 # S2 (external) settings
8909 # Position Up Dn Description
8910 # --------------------------------------------
8912 # X Duplex edit (transmit editing keys)
8913 # --------------------------------------------
8914 # 2 X 912/920 emulation
8916 # --------------------------------------------
8920 # --------------------------------------------
8924 # --------------------------------------------
8928 # --------------------------------------------
8932 # --------------------------------------------
8936 # --------------------------------------------
8937 # 6 X White on black display
8938 # X Black on white display
8939 # --------------------------------------------
8942 # --------------------------------------------
8945 # --------------------------------------------
8948 # --------------------------------------------
8951 # --------------------------------------------
8952 # 10 X CR/LF (Auto LF)
8955 # S3 (internal switch) settings:
8957 # Position Up Dn Description
8958 # --------------------------------------------
8961 # --------------------------------------------
8964 # --------------------------------------------
8967 # --------------------------------------------
8970 # --------------------------------------------
8973 # --------------------------------------------
8974 # 4 X Blinking block cursor
8976 # --------------------------------------------
8977 # 4 X Blinking underline cursor
8979 # --------------------------------------------
8980 # 4 X Steady block cursor
8982 # --------------------------------------------
8983 # 4 X Steady underline cursor
8985 # --------------------------------------------
8986 # 6 X Screen blanking timer (ON)
8987 # X Screen blanking timer (OFF)
8988 # --------------------------------------------
8989 # 7 X Page attributes
8991 # --------------------------------------------
8992 # 8 X DCD disconnected
8994 # --------------------------------------------
8995 # 9 X DSR disconnected
8997 # --------------------------------------------
8998 # 10 X DTR Disconnected
9000 # --------------------------------------------
9002 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
9003 tvi925|televideo 925,
9004 OTbs, am, bw, hs, ul,
9005 cols#80, lines#24, xmc#1,
9006 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
9007 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9008 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9009 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
9010 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9011 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9012 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9013 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9014 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9015 tsl=\Eh\Ef, use=adm+sgr,
9016 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9017 # to avoid "magic cookie" standout glitch:
9018 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9020 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
9022 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9023 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9024 # for additional capabilities,
9025 # The following tvi descriptions from B:pjphar and virus!mike
9026 # is for all 950s. It sets the following attributes:
9027 # full duplex (\EDF) write protect off (\E()
9028 # conversation mode (\EC) graphics mode off (\E%)
9029 # white on black (\Ed) auto page flip off (\Ew)
9030 # turn off status line (\Eg) clear status line (\Ef\r)
9031 # normal video (\E0) monitor mode off (\EX or \Eu)
9032 # edit mode (\Er) load blank char to space (\Ee\040)
9033 # line edit mode (\EO) enable buffer control (^O)
9034 # protect mode off (\E\047) duplex edit keys (\El)
9035 # program unshifted send key to send line all (\E016)
9036 # program shifted send key to send line unprotected (\E004)
9037 # set the following to nulls:
9038 # field delimiter (\Ex0\200\200)
9039 # line delimiter (\Ex1\200\200)
9040 # start-protected field delimiter (\Ex2\200\200)
9041 # end-protected field delimiter (\Ex3\200\200)
9042 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9044 # TVI 950 Switch Setting Reference Charts
9048 # S1 1 2 3 4 5 6 7 8 9 10
9049 # +-----------------------+-----+-----+-----------------------+
9050 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9052 # +------+-----------------------+-----+-----+-----------------------+
9053 # | Up | See | 7 | 2 | See |
9054 # +------+-----------------------+-----+-----+-----------------------+
9055 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9056 # +------+-----------------------+-----+-----+-----------------------+
9059 # S2 1 2 3 4 5 6 7 8 9 10
9060 # +-----+-----+-----------------+-----+-----------+-----+-----+
9061 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9062 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9063 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9064 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9065 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9066 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9070 # +-----------+-----+-----+-----+-----+-----------+
9071 # | Display | 1 | 2 | 3 | 4 | Baud |
9072 # +-----------+-----+-----+-----+-----+ |
9073 # | Printer | 7 | 8 | 9 | 10 | Rate |
9074 # +-----------+-----+-----+-----+-----+-----------+
9075 # | D | D | D | D | 9600 |
9076 # | U | D | D | D | 50 |
9077 # | D | U | D | D | 75 |
9078 # | U | U | D | D | 110 |
9079 # | D | D | U | D | 135 |
9080 # | U | D | U | D | 150 |
9081 # | D | U | U | D | 300 |
9082 # | U | U | U | D | 600 |
9083 # | D | D | D | U | 1200 |
9084 # | U | D | D | U | 1800 |
9085 # | D | U | D | U | 2400 |
9086 # | U | U | D | U | 3600 |
9087 # | D | D | U | U | 4800 |
9088 # | U | D | U | U | 7200 |
9089 # | D | U | U | U | 9600 |
9090 # | U | U | U | U | 19200 |
9091 # +-----+-----+-----+-----+-----------+
9094 # +-----+-----+-----+-----------+
9095 # | 3 | 4 | 5 | Parity |
9096 # +-----+-----+-----+-----------+
9097 # | X | X | D | None |
9098 # | D | D | U | Odd |
9099 # | D | U | U | Even |
9100 # | U | D | U | Mark |
9101 # | U | U | U | Space |
9102 # +-----+-----+-----+-----------+
9106 # +-----+-----+-----------------+
9107 # | 7 | 8 | Communication |
9108 # +-----+-----+-----------------+
9109 # | D | D | Half Duplex |
9110 # | D | U | Full Duplex |
9113 # +-----+-----+-----------------+
9115 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9116 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9117 # should be present and all tvi native modes use the same string for this.
9118 # Finally, note that BSD has cud1=^V. -- esr)
9119 tvi950|televideo 950,
9120 OTbs, am, hs, mir, msgr, xenl, xon,
9121 cols#80, it#8, lines#24, xmc#1,
9122 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9123 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9124 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9125 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9126 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
9128 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
9129 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9130 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9131 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9132 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9133 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9134 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9137 # is for 950 with two pages adds the following:
9138 # set 48 line page (\E\\2)
9139 # place cursor at page 0, line 24, column 1 (\E-07 )
9140 # set local (no send) edit keys (\Ek)
9142 # two page 950 adds the following:
9143 # when entering ex, set 24 line page (\E\\1)
9144 # when exiting ex, reset 48 line page (\E\\2)
9145 # place cursor at 0,24,1 (\E-07 )
9146 # set duplex (send) edit keys (\El) when entering vi
9147 # set local (no send) edit keys (\Ek) when exiting vi
9149 tvi950-2p|televideo950 w/2 pages,
9150 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
9151 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9152 smkx=\El, use=tvi950,
9154 # is for 950 with four pages adds the following:
9155 # set 96 line page (\E\\3)
9156 # place cursor at page 0, line 24, column 1 (\E-07 )
9158 # four page 950 adds the following:
9159 # when entering ex, set 24 line page (\E\\1)
9160 # when exiting ex, reset 96 line page (\E\\3)
9161 # place cursor at 0,24,1 (\E-07 )
9163 tvi950-4p|televideo950 w/4 pages,
9164 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
9165 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9166 smkx=\El, use=tvi950,
9168 # <is2> for reverse video 950 changes the following:
9169 # set reverse video (\Ed)
9171 # set vb accordingly (\Ed ...delay... \Eb)
9173 tvi950-rv|televideo950 rev video,
9174 flash=\Ed$<200/>\Eb,
9175 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
9178 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9179 tvi950-rv-2p|televideo950 rev video w/2 pages,
9180 flash=\Ed$<200/>\Eb,
9181 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
9182 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9183 smkx=\El, use=tvi950,
9185 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9186 tvi950-rv-4p|televideo950 rev video w/4 pages,
9187 flash=\Ed$<200/>\Eb,
9188 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
9189 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9190 smkx=\El, use=tvi950,
9191 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9192 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9193 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9194 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9195 # the :ko: string had :cl: in it, which means that one of the original
9196 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9197 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9198 # ko implies -- esr)
9199 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9201 tvi955|televideo 955,
9204 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9205 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9206 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9207 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9208 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9209 rmam=\E[=7l, rmxon=^N,
9210 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
9211 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9213 tvi955-w|955-w|televideo955 w/132 cols,
9215 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9216 # use half-intensity as normal mode, full intensity as <bold>
9217 tvi955-hb|955-hb|televideo955 half-bright,
9218 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9219 sgr0=\EG0\E[=5h, use=tvi955,
9220 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9221 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9222 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9223 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9224 # it does to the function keys. I deduced <rmam>/<smam>.
9225 # also added empty <acsc> to suppress tic warning, -- esr)
9226 tvi970|televideo 970,
9227 OTbs, OTpt, am, da, db, mir, msgr,
9228 cols#80, it#8, lines#24,
9229 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9230 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9231 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9232 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9233 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9234 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9235 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9236 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9237 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9238 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9239 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9240 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9241 smul=\E[4m, vpa=\E[%i%p1%dd,
9242 tvi970-vb|televideo 970 with visual bell,
9243 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9245 tvi970-2p|televideo 970 with using 2 pages of memory,
9246 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9248 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9249 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9250 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9251 # <smul> strings are klutzy, but at least use no screen space.
9252 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9253 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9254 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9255 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9256 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9257 tvipt|televideo personal terminal,
9260 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9261 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9262 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9263 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
9264 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9265 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9266 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9267 tvi9065|televideo 9065,
9268 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9269 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9271 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9272 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9273 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9274 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9275 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9276 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9277 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9278 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
9279 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9280 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
9282 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9283 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9284 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9285 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9286 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9287 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9288 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
9289 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9290 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9291 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9292 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9293 rep=\E[%p2%db%p1%c, rev=\EG4,
9294 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9295 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9296 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9297 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9298 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9299 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
9300 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
9301 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
9302 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
9303 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
9307 # In September 1993, Visual Technology of Westboro, Massachusetts,
9308 # merged with White Pine Software of Nashua, New Hampshire.
9310 # White Pine Software may be contacted at +1 603/886-9050.
9311 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
9314 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
9315 # Recently I hacked together the following termcap for Visual
9316 # Technology's Visual 50 terminal. It's a slight modification of
9318 # It's intended to run when the Visual 50 is in vt52 emulation mode
9319 # (I know what you're thinking; if it's emulating a vt52, then why
9320 # another termcap? Well, it turns out that the Visual 50 can handle
9321 # <dl1> and db(?) among other things, which the vt52 can't)
9322 # The termcap works OK for the most part. The only problem is on
9323 # character inserts. The whole line gets painfully redrawn for each
9324 # character typed. Any suggestions?
9325 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
9326 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
9327 # disguise; <kf7>-<kf9> are really l1-l3.
9329 OTbs, OTpt, am, da, db, msgr,
9330 cols#80, it#8, lines#24,
9331 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
9332 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9333 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
9334 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
9335 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
9336 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
9337 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
9338 # this one was BSD & SCO's vi50
9339 vi50adm|visual 50 in adm3a mode,
9341 cols#80, it#8, lines#24,
9342 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9343 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
9344 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
9345 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
9347 # From: Jeff Siegal <jbs@quiotix.com>
9349 OTbs, am, mir, msgr,
9350 cols#80, it#8, lines#24,
9351 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
9352 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9353 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
9354 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
9355 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
9358 # Visual 200 from BRL
9359 # The following switch settings are assumed for normal operation:
9360 # FULL_DUPLEX SCROLL CR
9361 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
9362 # Other switches may be set for operator convenience or communication
9364 # Character insertion is kludged in order to get around the "beep" misfeature.
9365 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
9366 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
9367 # and <dl1> strings, but we seem to get along fine without them.
9369 OTbs, OTpt, am, mir, msgr,
9370 OTkn#10, cols#80, it#8, lines#24,
9371 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
9372 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9373 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
9374 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
9375 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9376 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
9377 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
9378 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
9379 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
9380 rmacs=\EG, rmkx=\E>, rmso=\E3,
9381 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
9382 smkx=\E=, smso=\E4, tbc=\Eg,
9383 # The older Visuals didn't come with function keys. This entry uses
9384 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
9385 # If your version of vi doesn't support function keys you may want
9387 vi200-f|visual 200 no function keys,
9388 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
9389 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
9390 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
9392 vi200-rv|visual 200 reverse video,
9393 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
9395 # the function keys are programmable but we don't reprogram them to their
9396 # default values with <is2> because programming them is very verbose. maybe
9397 # an initialization file should be made for the 300 and they could be stuck
9399 # (vi300: added <rmam>/<smam> based on init string -- esr)
9400 vi300|visual 300 ansi x3.64,
9403 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
9404 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9405 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9407 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
9408 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9409 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
9410 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
9411 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
9412 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
9413 smso=\E[1m, smul=\E[4m,
9414 # some of the vi300s have older firmware that has the command
9415 # sequence for setting editing extent reversed.
9416 vi300-old|visual 300 with old firmware (set edit extent reversed),
9417 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
9420 # Visual 500 prototype entry from University of Wisconsin.
9421 # The best place to look for the escape sequences is page A1-1 of the
9422 # Visual 500 manual. The initialization sequence given here may be
9423 # overkill, but it does leave out some of the initializations which can
9424 # be done with the menus in set-up mode.
9425 # The :xp: line below is so that emacs can understand the padding requirements
9426 # of this slow terminal. :xp: is 10 time the padding factor.
9427 # (vi500: removed unknown :xp#4: termcap;
9428 # also added empty <acsc> to suppress tic warning -- esr)
9431 cols#80, it#8, lines#33,
9432 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
9433 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
9434 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9435 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
9436 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
9438 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
9439 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9440 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
9441 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
9443 # The visual 550 is a visual 300 with tektronix graphics,
9444 # and with 33 lines. clear screen is modified here to
9445 # also clear the graphics.
9446 vi550|visual 550 ansi x3.64,
9448 clear=\030\E[H\E[2J, use=vi300,
9450 vi603|visual603|visual 603,
9452 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
9453 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
9454 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
9455 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
9456 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
9457 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
9458 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
9464 # 3471 North First Street
9465 # San Jose, CA 95134
9466 # Vox: (408)-473-1200
9467 # Fax: (408) 473-1222
9468 # Web: http://www.wyse.com
9470 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
9471 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
9472 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
9473 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
9475 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
9476 # They now own the Qume and Amdek brands, too. So these are the people to
9477 # talk with about all Link, Qume, and Amdek terminals.
9479 # These entries include a few small fixes.
9480 # I canceled the bel capacities in the vb entries.
9481 # I made two trivial syntax fixes in the wyse30 entry.
9482 # I made some entries relative to adm+sgr.
9485 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
9487 # Although the Wyse 30 can support more than one attribute
9488 # it requires magic cookies to do so. Many applications do not
9489 # function well with magic cookies. The following terminfo uses
9490 # the protect mode to support one attribute (dim) without cookies.
9491 # If more than one attribute is needed then the wy30-mc terminfo
9494 wy30|wyse30|Wyse 30,
9495 am, bw, hs, mc5i, mir, msgr, xon,
9496 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9497 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9498 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
9499 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9500 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
9501 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
9502 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
9503 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
9504 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
9505 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
9506 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9507 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
9508 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
9509 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
9510 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
9511 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9512 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9513 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9514 smso=\E`7\E), tbc=\E0, tsl=\EF,
9516 # This terminal description uses the non-hidden attribute mode
9517 # (with magic cookie).
9519 # (wy30-mc: added <smcup> to suppress tic warning --esr)
9520 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
9523 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
9524 rmcup=\EG0, rmso=\EG0,
9525 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9526 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9527 smso=\EG4, use=wy30, use=adm+sgr,
9528 # The mandatory pause used by <flash> does not work with
9529 # older versions of terminfo. If you see this effect then
9530 # unset xon and delete the / from the delay.
9531 # i.e. change $<100/> to $<100>
9532 wy30-vb|wyse30-vb|wyse 30 visible bell,
9535 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
9536 # Normal) without magic cookies by using the protect mode.
9537 # The following description uses this feature, but when more
9538 # than one attribute is put on the screen at once, all attributes
9539 # will be changed to be the same as the last attribute given.
9540 # The Wyse 50 can support more attributes when used with magic
9541 # cookies. The wy50-mc terminal description uses magic cookies
9542 # to correctly handle multiple attributes on a screen.
9544 wy50|wyse50|Wyse 50,
9545 am, bw, hs, mc5i, mir, msgr, xon,
9546 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9547 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9548 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
9549 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9550 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
9551 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9552 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
9553 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
9554 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9555 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9556 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9557 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9558 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9559 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9560 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
9561 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9562 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
9563 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9564 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9565 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9566 smso=\E`6\E), tbc=\E0, tsl=\EF,
9568 # This terminal description uses the non-hidden attribute mode
9569 # (with magic cookie).
9571 # The mandatory pause used by flash does not work with some
9572 # older versions of terminfo. If you see this effect then
9573 # unset <xon> and delete the / from the delay.
9574 # i.e. change $<100/> to $<100>
9575 # (wy50-mc: added <smcup> to suppress tic warning --esr)
9576 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
9579 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
9580 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
9581 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9582 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9583 smso=\EGt, use=wy50, use=adm+sgr,
9584 wy50-vb|wyse50-vb|wyse 50 visible bell,
9586 wy50-w|wyse50-w|wyse 50 132-column,
9587 cols#132, lw#7, nlab#16, wsl#97,
9588 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9590 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
9594 # The Wyse 350 is a Wyse 50 with color.
9595 # Unfortunately this means that it has magic cookies.
9596 # The color attributes are designed to overlap the reverse, dim and
9597 # underline attributes. This is nice for monochrome applications
9598 # because you can make underline stuff green (or any other color)
9599 # but for true color applications it's not so hot because you cannot
9600 # mix color with reverse, dim or underline.
9601 # To further complicate things one of the attributes must be
9602 # black (either the foreground or the background). In reverse video
9603 # the background changes color with black letters. In normal video
9604 # the foreground changes colors on a black background.
9605 # This terminfo uses some of the more advanced features of curses
9606 # to display both color and blink. In the final analysis I am not
9607 # sure that the wy350 runs better with this terminfo than it does
9608 # with the wy50 terminfo (with user adjusted colors).
9610 # The mandatory pause used by flash does not work with
9611 # older versions of terminfo. If you see this effect then
9612 # unset xon and delete the / from the delay.
9613 # i.e. change $<100/> to $<100>
9615 # Bug: The <op> capability resets attributes.
9616 wy350|wyse350|Wyse 350,
9617 am, bw, hs, mc5i, mir, xon,
9618 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
9620 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
9621 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
9622 cub1=^H, cud1=^J, cuf1=^L,
9623 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
9624 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
9625 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9626 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
9627 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
9628 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9629 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9630 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9631 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9632 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9633 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9634 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
9635 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9636 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
9637 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
9638 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
9639 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9640 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
9641 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
9642 wy350-vb|wyse350-vb|wyse 350 visible bell,
9644 wy350-w|wyse350-w|wyse 350 132-column,
9645 cols#132, lw#7, nlab#16, wsl#97,
9646 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9648 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
9651 # This terminfo description is untested.
9652 # The wyse100 emulates an adm31, so the adm31 entry should work.
9656 cols#80, lines#24, xmc#1,
9657 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9658 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9659 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
9660 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
9661 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
9662 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
9663 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
9665 # The Wyse 120/150 has most of the features of the Wyse 60.
9666 # This terminal does not need padding up to 9600 baud!
9667 # <msgr> should be set but the clear screen fails when in
9668 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9671 wy120|wyse120|wy150|wyse150|Wyse 120/150,
9672 am, bw, hs, km, mc5i, mir, msgr, xon,
9673 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9674 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9675 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9676 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9677 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9678 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9679 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
9680 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9681 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9682 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9683 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9684 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9685 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9686 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9687 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9688 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9689 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
9690 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9691 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9692 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9693 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
9694 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9696 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9697 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9698 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9699 tbc=\E0, tsl=\EF, use=adm+sgr,
9701 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
9702 cols#132, lw#7, nlab#16, wsl#97,
9703 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9704 rs2=\E`;$<70>, use=wy120,
9706 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
9707 lh@, lines#25, lw@, nlab@,
9708 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
9710 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
9711 lh@, lines#25, lw@, nlab@,
9712 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
9714 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
9717 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
9720 # The Wyse 60 is like the Wyse 50 but with more padding.
9721 # The reset strings are slow and the pad times very depending
9722 # on other parameters such as font loading. I have tried
9723 # to follow the following outline:
9725 # <rs1> -> set personality
9726 # <rs2> -> set number of columns
9727 # <rs3> -> set number of lines
9728 # <is1> -> select the proper font
9729 # <is2> -> do the initialization
9730 # <is3> -> set up display memory (2 pages)
9732 # The Wyse 60's that have vt100 emulation are slower than the
9733 # older Wyse 60's. This change happened mid-1987.
9734 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
9736 # The meta key is only half right. This terminal will return the
9737 # high order bit set when you hit CTRL-function_key
9739 # It may be useful to assign two function keys with the
9740 # values \E=(\s look at old data in page 1
9741 # \E=W, look at bottom of page 1
9742 # where \s is a space ( ).
9745 # The Wyse 60 runs faster when the XON/XOFF
9746 # handshake is turned off.
9748 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
9749 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9750 wy60|wyse60|Wyse 60,
9751 am, bw, hs, km, mc5i, mir, msgr,
9752 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
9753 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9754 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
9755 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9756 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9757 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
9758 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9759 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
9760 ip=$<3>, is1=\EcB0\EcC1,
9761 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9762 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9763 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9764 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9765 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9766 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9767 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9768 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9769 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
9770 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9771 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9772 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
9773 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
9774 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
9775 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
9776 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9777 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9778 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9779 tbc=\E0, tsl=\EF, use=adm+sgr,
9781 wy60-w|wyse60-w|wyse 60 132-column,
9782 cols#132, lw#7, nlab#16, wsl#97,
9783 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
9784 rs2=\EeF$<150>\E`;$<150>, use=wy60,
9786 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
9787 lh@, lines#25, lw@, nlab@,
9788 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
9789 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
9790 lh@, lines#25, lw@, nlab@,
9791 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
9793 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
9795 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
9796 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
9797 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
9798 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
9799 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
9800 cols#132, lw#7, nlab#16, wsl#97,
9801 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9802 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
9803 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
9805 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
9806 lh@, lines#43, lw@, nlab@,
9807 pln@, rs3=\Ee+$<150>, use=wy60-42,
9808 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
9809 lh@, lines#43, lw@, nlab@,
9810 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
9812 wy60-vb|wyse60-vb|Wyse 60 visible bell,
9814 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
9817 # The Wyse-99GT looks at lot like the Wyse 60 except that it
9818 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
9819 # setup parameter controls the number of lines on the screen.
9820 # For the Wyse 99GT the "lines" setup parameter controls the
9821 # number of lines in a page. The screen can display 25 lines max.
9822 # The Wyse-99GT also has personalities for the VT220 and
9823 # Tektronix 4014. But this has no bearing on the native mode.
9825 # (msgr) should be set but the clear screen fails when in
9826 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9827 # then set msgr, else use msgr@.
9829 # u0 -> enter Tektronix mode
9830 # u1 -> exit Tektronix mode
9832 wy99gt|wyse99gt|Wyse 99gt,
9834 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9835 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9836 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9837 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9838 u0=\E~>\E8, u1=\E[42h, use=wy60,
9840 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9841 cols#132, lw#7, nlab#16, wsl#97,
9842 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9843 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9846 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9847 lh@, lines#25, lw@, nlab@,
9848 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9850 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9851 lh@, lines#25, lw@, nlab@,
9852 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9854 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9857 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9860 # Can't set tabs! Other bugs (ANSI mode only):
9861 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9862 # is too much complex to be described);
9863 # - meta key can't be described (the terminal forgets it when reset);
9864 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9865 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9867 # dch1 has been commented out because it causes annoying glittering when
9868 # vi deletes one character at the beginning of a line with tabs in it.
9869 # dch makes sysgen(1M) have a horrible behaviour when deleting
9870 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9871 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9872 # not, so smir and rmir are commented out as well.
9873 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9874 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9875 am, km, mc5i, mir, msgr, xenl,
9876 cols#80, it#8, lines#25, vt#3,
9877 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9878 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9879 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9880 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9881 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9882 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9883 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9884 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9885 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9886 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9887 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9888 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9889 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9890 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9891 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9892 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9893 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9894 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9895 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9896 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9897 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9898 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9899 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9901 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9902 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9903 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9905 # This is the american terminal. Here tabs work fine.
9906 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9907 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9908 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9910 # This terminal (firmware version 02) has a lot of bugs:
9912 # - other bugs in ANSI modes (see above).
9913 # This description disables handshaking when using cup. This is because
9914 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9915 # cannot be used at speeds greater than 9600 baud, because at greater
9916 # speeds handshaking is needed even for character sending. If you use
9917 # DTR handshaking, you can use even greater speeds.
9918 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9919 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9920 am, bw, hs, km, mc5i, mir, msgr, xon,
9921 cols#80, it#8, lines#25, wsl#46,
9922 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9923 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9924 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9925 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9926 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9927 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9928 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9930 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9931 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9932 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9933 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9934 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9935 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9936 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9937 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9938 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9939 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9940 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9941 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9942 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9943 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9945 # This is the american terminal. Here tabs work.
9946 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9947 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9948 hts=\E1, tbc=\E0, use=wy99f,
9951 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9952 # The reset strings are slow and the pad times very depending
9953 # on other parameters such as font loading. I have tried
9954 # to follow the following outline:
9956 # <rs1> -> set personality
9957 # <rs2> -> set number of columns
9958 # <rs3> -> set number of lines
9959 # <is1> -> select the proper font
9960 # <is2> -> do the initialization
9961 # <is3> -> set up display memory (2 pages)
9963 # The display memory may be used for either text or graphics.
9964 # When "Display Memory = Shared" the terminal will have more pages
9965 # but garbage may be left on the screen when you switch from
9966 # graphics to text. If "Display Memory = Unshared" then the
9967 # text area will be only one page long.
9969 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9970 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9971 wy160|wyse160|Wyse 160,
9972 am, bw, hs, km, mc5i, mir, msgr,
9973 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9974 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9975 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9976 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9977 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9978 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9979 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9980 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9981 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9982 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9983 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9984 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9985 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9986 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9987 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9988 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9989 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9990 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9991 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9992 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9993 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9994 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9995 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9996 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9997 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9998 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9999 tbc=\E0, tsl=\EF, use=adm+sgr,
10001 wy160-w|wyse160-w|wyse 160 132-column,
10002 cols#132, lw#7, nlab#16, wsl#90,
10003 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
10004 rs2=\EeF$<150>\E`;$<150>, use=wy160,
10006 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10007 lh@, lines#25, lw@, nlab@,
10008 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10009 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10010 lh@, lines#25, lw@, nlab@,
10011 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10013 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10015 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10016 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10017 rs3=\Ee*$<150>, use=wy160,
10018 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10019 cols#132, lw#7, nlab#16, wsl#90,
10020 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10021 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10023 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10024 lh@, lines#43, lw@, nlab@,
10025 pln@, rs3=\Ee+$<150>, use=wy160-42,
10026 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10027 lh@, lines#43, lw@, nlab@,
10028 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10030 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10032 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10035 # The Wyse 75 is a vt100 lookalike without advanced video.
10037 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10038 # Underline) without magic cookies. The following description
10039 # uses this capability, but when more than one attribute is
10040 # put on the screen at once, all attributes will be changed
10041 # to be the same as the last attribute given.
10042 # The Wyse 75 can support more attributes when used with magic
10043 # cookies. The wy75-mc terminal description uses magic cookies
10044 # to correctly handle multiple attributes on a screen.
10046 wy75|wyse75|wyse 75,
10047 am, hs, mc5i, mir, msgr, xenl, xon,
10048 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10049 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10050 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10051 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
10052 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10053 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10054 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10055 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10056 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10057 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10058 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
10059 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10060 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10061 ind=\n$<2>, ip=$<1>,
10062 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10063 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10064 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10065 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10066 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10067 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10068 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10069 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10070 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10071 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10072 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10073 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10074 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10076 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
10077 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10078 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10079 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10081 # This terminal description uses the non-hidden attribute mode
10082 # (with magic cookie).
10084 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10087 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10088 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10089 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
10090 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10092 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10095 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10097 rs2=\E[35h\E[?3h$<80>, use=wy75,
10098 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10102 # Wyse 85 emulating a vt220 7 bit mode.
10103 # 24 line screen with status line.
10105 # The vt220 mode permits more function keys but it wipes out
10106 # the escape key. I strongly recommend that <f11> be set to
10108 # The terminal may have to be set for 8 data bits and 2 stop
10109 # bits for the arrow keys to work.
10110 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10111 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10112 # <dch> leave trash on the screen when used without XON/XOFF.
10114 wy85|wyse85|wyse 85,
10115 am, hs, mc5i, mir, msgr, xenl, xon,
10116 cols#80, it#8, lines#24, wsl#80,
10117 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10118 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10119 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10120 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10121 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10122 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10123 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10124 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10125 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10126 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10127 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10128 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10129 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10130 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10131 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10132 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10133 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10134 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10135 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10136 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10137 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10138 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10139 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10140 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10141 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10142 rs3=\E[?5l, sc=\E7,
10143 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10144 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10145 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10146 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10148 # Wyse 85 with visual bell.
10149 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10150 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
10152 # Wyse 85 in 132-column mode.
10153 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10155 rs2=\E[35h\E[?3h$<70>, use=wy85,
10157 # Wyse 85 in 132-column mode with visual bell.
10158 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10161 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10162 # This copes with an apparent firmware bug in the wy85. He writes:
10163 # "What I did was change leave the terminal cursor keys set to Normal
10164 # (instead of application), and change \E[ to \233 for all the keys in
10165 # terminfo. At one point, I found some reference indicating that this
10166 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10167 # me), but I can't find that and the server under my bookmark to "Wyse
10168 # Technical" isn't responding. So there's the question of wether the wy85
10169 # terminfo should reflect the manufactuer's intended behaviour of the terminal
10171 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10172 am, hs, mc5i, mir, msgr, xenl, xon,
10173 cols#80, it#8, lines#24, wsl#80,
10174 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10175 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10176 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10179 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10180 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10181 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10182 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10183 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10184 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10185 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10186 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10187 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10188 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10189 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10190 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10191 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10192 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10193 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10194 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10195 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10196 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10197 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10198 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10199 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10200 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10201 rs3=\E[?5l, sc=\E7,
10202 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10203 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10204 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10205 tsl=\E[40h\E7\E[25;%i%p1%dH,
10207 # Wyse 185 emulating a vt320 7 bit mode.
10209 # This terminal always displays 25 lines. These lines may be used
10210 # as 24 data lines and a terminal status line (top or bottom) or
10211 # 25 data lines. The 48 and 50 line modes change the page size
10212 # and not the number of lines on the screen.
10214 # The Compose Character key can be used as a meta key if changed
10217 wy185|wyse185|wyse 185,
10218 am, hs, km, mc5i, mir, msgr, xenl, xon,
10219 cols#80, it#8, lines#24, wsl#80,
10220 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10221 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10222 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10223 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10224 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10225 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10226 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10227 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10228 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10229 el=\E[K, el1=\E[1K, enacs=\E)0,
10230 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
10231 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10232 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10233 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10234 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10235 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10236 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10237 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10238 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10239 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10240 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10241 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10242 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10243 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10244 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10245 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10246 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10247 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10248 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10249 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10250 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10251 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10254 # Wyse 185 with 24 data lines and top status (terminal status)
10255 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10257 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10260 # Wyse 185 with visual bell.
10261 wy185-vb|wyse185-vb|wyse 185+flash,
10264 # Wyse 185 in 132-column mode.
10265 wy185-w|wyse185-w|wyse 185 in 132-column mode,
10267 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10268 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
10270 # Wyse 185 in 132-column mode with visual bell.
10271 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
10274 # wy325 terminfo entries
10275 # Done by Joe H. Davis 3-9-92
10277 # lines 25 columns 80
10279 wy325|wyse325|Wyse epc,
10280 am, bw, hs, mc5i, mir,
10281 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10282 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10283 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10284 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10285 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10286 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10287 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
10288 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10289 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
10290 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10291 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10292 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10293 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10294 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10295 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
10296 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10297 mc0=\EP, mc4=^T, mc5=\Ed#,
10298 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10299 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10300 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10301 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
10302 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10303 rs3=\EwG\Ee($<100>,
10304 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
10305 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10306 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
10307 tsl=\EF, use=adm+sgr,
10310 # lines 24 columns 80 vb
10312 wy325-vb|wyse325-vb|wyse-325 with visual bell,
10316 # lines 24 columns 132
10318 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
10319 cols#132, lw#7, nlab#16, wsl#97,
10320 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10321 rs2=\E`;$<70>, use=wy325,
10323 # lines 25 columns 80
10325 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
10326 lh@, lines#25, lw@, nlab@,
10327 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10329 # lines 25 columns 132
10331 wy325-25w|wyse325-25w|wy325 132 columns,
10332 lh@, lines#25, lw@, nlab@,
10333 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10335 # lines 25 columns 132 vb
10337 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
10341 # lines 42 columns 80
10343 wy325-42|wyse325-42|wyse-325 42 lines,
10344 lh@, lines#42, lw@, nlab@,
10345 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10347 # lines 42 columns 132
10349 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
10350 lh@, lines#42, lw@, nlab@,
10351 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10353 # lines 42 columns 132 vb
10355 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
10358 # lines 43 columns 80
10360 wy325-43|wyse325-43|wyse-325 43 lines,
10361 lh@, lines#43, lw@, nlab@,
10364 # lines 43 columns 132
10366 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
10367 lh@, lines#43, lw@, nlab@,
10368 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10370 # lines 43 columns 132 vb
10372 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
10375 # Wyse 370 -- 24 line screen with status line.
10377 # The terminal may have to be set for 8 data bits and 2 stop
10378 # bits for the arrow keys to work.
10380 # If you change keyboards the terminal will send different
10381 # escape sequences.
10382 # The following definition is for the basic terminal without
10385 # <u0> -> enter Tektronix 4010/4014 mode
10386 # <u1> -> exit Tektronix 4010/4014 mode
10387 # <u2> -> enter ASCII mode (from any ANSI mode)
10388 # <u3> -> exit ASCII mode (goto native ANSI mode)
10389 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
10390 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
10392 # Bug: The <op> capability resets attributes.
10393 wy370-nk|wyse 370 without function keys,
10394 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
10395 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
10396 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10397 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10398 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10399 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10400 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10401 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10402 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
10403 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10404 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
10405 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
10406 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
10407 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
10408 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10410 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
10411 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
10412 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
10413 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
10415 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
10416 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
10417 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
10418 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10419 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
10420 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
10421 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10422 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10423 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10424 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
10425 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
10426 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
10428 # Function key set for the ASCII (wy-50 compatible) keyboard
10429 # This is the default 370.
10431 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
10432 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10433 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
10434 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10435 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
10436 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
10437 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
10438 knp=\E[U, kpp=\E[V, use=wy370-nk,
10440 # Function key set for the VT-320 (and wy85) compatible keyboard
10442 wy370-105k|Wyse 370 with 105 key keyboard,
10443 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10444 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10445 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10446 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
10447 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10448 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
10449 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
10450 use=wy370-nk, use=vt220+keypad,
10452 # Function key set for the PC compatible keyboard
10454 wy370-EPC|Wyse 370 with 102 key keyboard,
10455 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10456 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
10457 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10458 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10459 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
10461 # Wyse 370 with visual bell.
10462 wy370-vb|Wyse 370 with visible bell,
10465 # Wyse 370 in 132-column mode.
10466 wy370-w|Wyse 370 in 132-column mode,
10468 rs2=\E[35h\E[?3h$<70>, use=wy370,
10470 # Wyse 370 in 132-column mode with visual bell.
10471 wy370-wvb|Wyse 370 with visible bell 132-columns,
10472 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
10473 wy370-rv|Wyse 370 reverse video,
10474 rs3=\E[32h\E[?5h, use=wy370,
10476 # Wyse 99gt Tektronix 4010/4014 emulator,
10478 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
10481 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10482 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10484 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10486 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10487 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
10489 # Wyse 160 Tektronix 4010/4014 emulator,
10491 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
10492 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10493 home=^]8`g @\037, use=wy99gt-tek,
10495 # Wyse 370 Tektronix 4010/4014 emulator,
10497 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
10500 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10501 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
10503 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10505 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10506 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
10507 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
10509 # Vendor-supplied Wyse entries end here.
10512 #TITLE: TERMINFO ENTRY WY520
10514 # The WY520 terminfo is based on the WY285 entry published on the WYSE
10515 # BBS with the addition of more function keys and special keys.
10517 # rs1 -> set personality
10518 # rs2 -> set number of columns
10519 # rs3 -> set number of lines
10520 # is1 -> select the proper font
10521 # is2 -> do the initialization
10522 # is3 -> If this string is empty then rs3 gets sent.
10524 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
10525 # - The BS key is programmed to generate BS in smcup since
10526 # is2 doesn't seem to work.
10527 # - Remove and shift/Remove: delete a character
10528 # - Insert : enter insert mode
10529 # - Find : delete to end of file
10530 # - Select : clear a line
10531 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
10533 # - Bottom status line (host writable line) is used.
10534 # - smkx,rmkx are removed because this would put the numeric
10535 # keypad in Dec application mode which doesn't seem to work
10536 # with SCO applications.
10538 wy520|wyse520|wyse 520,
10539 am, hs, km, mc5i, mir, xenl, xon,
10540 cols#80, it#8, lines#24, wsl#80,
10541 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10542 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10543 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10544 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10545 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10546 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10547 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
10548 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
10549 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
10550 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
10551 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
10552 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10553 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
10554 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10555 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
10556 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
10557 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
10558 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
10559 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
10560 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
10561 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
10562 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10563 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
10564 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
10565 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10566 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10567 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10568 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
10569 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10570 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
10571 vpa=\E[%i%p1%dd, use=vt220+keypad,
10573 # Wyse 520 with 24 data lines and status (terminal status)
10574 wy520-24|wyse520-24|wyse 520 with 24 data lines,
10576 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10579 # Wyse 520 with visual bell.
10580 wy520-vb|wyse520-vb|wyse 520 with visible bell,
10581 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
10583 # Wyse 520 in 132-column mode.
10584 wy520-w|wyse520-w|wyse 520 in 132-column mode,
10586 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10587 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
10589 # Wyse 520 in 132-column mode with visual bell.
10590 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
10591 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
10594 # Wyse 520 emulating a vt420 7 bit mode.
10595 # The DEL key is programmed to generate BS in is2.
10596 # With EPC keyboard.
10597 # - 'End' key will clear till end of line on EPC keyboard
10598 # - Shift/End : ignored.
10599 # - Insert : enter insert mode.
10600 # - Delete : delete a character (have to change interrupt character
10601 # to CTRL-C: stty intr '^c') for it to work since the
10602 # Delete key sends 7FH.
10603 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
10604 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
10605 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
10608 # Wyse 520 with 24 data lines and status (terminal status)
10609 # with EPC keyboard.
10610 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
10612 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10615 # Wyse 520 with visual bell.
10616 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
10617 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
10619 # Wyse 520 in 132-column mode.
10620 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
10622 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10623 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
10625 # Wyse 520 in 132-column mode with visual bell.
10626 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
10627 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
10629 # Wyse 520 in 80-column, 36 lines
10630 wy520-36|wyse520-36|wyse 520 with 36 data lines,
10633 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10636 # Wyse 520 in 80-column, 48 lines
10637 wy520-48|wyse520-48|wyse 520 with 48 data lines,
10640 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10643 # Wyse 520 in 132-column, 36 lines
10644 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
10647 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10650 # Wyse 520 in 132-column, 48 lines
10651 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
10654 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10658 # Wyse 520 in 80-column, 36 lines with EPC keyboard
10659 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
10662 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10665 # Wyse 520 in 80-column, 48 lines with EPC keyboard
10666 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
10669 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10672 # Wyse 520 in 132-column, 36 lines with EPC keyboard
10673 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
10676 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10679 # Wyse 520 in 132-column, 48 lines with EPC keyboard
10680 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
10683 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10686 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
10687 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
10688 # file and we don't know what <hts> is -- esr)
10689 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
10691 cols#80, it#8, lines#24,
10692 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
10693 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
10694 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
10695 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
10696 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
10697 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
10700 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
10701 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
10702 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10703 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
10706 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
10707 wy100q|Wyse 100 for Quotron,
10709 cols#80, lines#24, xmc#1,
10710 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
10711 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10712 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
10713 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
10714 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
10716 #### Kermit terminal emulations
10718 # Obsolete Kermit versions may be listed in the section describing obsolete
10719 # non-ANSI terminal emulators later in the file.
10722 # KERMIT standard all versions.
10723 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10724 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
10725 # From: greg small <gts@populi.berkeley.edu> 9-25-84
10726 kermit|standard kermit,
10729 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
10730 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
10731 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
10732 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
10733 kermit-am|standard kermit plus auto-margin,
10735 is2=K1 Standard Kermit plus Automatic Margins\n,
10737 # IBMPC Kermit 1.2.
10738 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
10739 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
10741 # From: greg small <gts@populi.berkeley.edu> 8-30-84
10742 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
10745 clear=\EH\EJ, ed@, el@,
10746 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
10747 # IBMPC Kermit 1.20
10748 # Cannot use line 25, now acts funny like ansi special scrolling region.
10749 # Initialization must escape from that region by cursor position to line 24.
10750 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
10751 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
10752 # From: greg small <gts@populi.berkeley.edu> 12-19-84
10753 pckermit120|UCB IBMPC Kermit 1.20,
10755 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
10757 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
10758 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
10759 # MS-DOS Kermit 2.27 for the IBMPC
10760 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10761 # Cannot use line 25, now acts funny like ansi special scrolling region.
10762 # Initialization must escape from that region by cursor position to line 24.
10763 # Does not use am: because autowrap is lost when kermit dropped and restarted.
10764 # Reverse video for standout like H19.
10765 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
10766 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10767 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
10769 cols#80, it#8, lines#24,
10770 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
10771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10772 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
10773 home=\EH, ht=^I, il1=\EL,
10774 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
10775 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
10776 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
10777 # MS-DOS Kermit 2.27 with automatic margins
10778 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10779 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
10781 cvvis=\EO\Eq\EG\EvK5,
10782 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
10784 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
10785 # Automatic margins now default. Use ansi <sgr> for highlights.
10786 # Define function keys.
10787 # (msk22714: removed obsolete ":kn#10:" -- esr)
10788 # From: greg small <gts@populi.berkeley.edu> 3-17-85
10789 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
10791 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
10792 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
10793 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
10794 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10795 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
10796 # This was designed for a VT320 emulator, but it is probably a good start
10797 # at support for the VT320 itself.
10798 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
10799 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
10800 vt320-k3|MS-Kermit 3.00's vt320 emulation,
10801 am, eslok, hs, km, mir, msgr, xenl,
10802 cols#80, it#8, lines#49, pb#9600, vt#3,
10803 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10804 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10805 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
10806 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10807 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10808 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10809 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10810 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
10811 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
10812 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10813 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10814 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
10815 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
10816 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10817 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
10818 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
10819 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
10820 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
10821 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
10822 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
10823 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10824 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
10825 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
10826 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
10827 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
10828 vt320-k311|dec vt320 series as defined by kermit 3.11,
10829 am, eslok, hs, mir, msgr, xenl, xon,
10830 cols#80, it#8, lines#24, vt#3,
10831 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10832 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10833 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
10834 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10835 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10836 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10837 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10838 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10839 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10840 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10841 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10842 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10843 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10844 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10845 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10846 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10847 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10848 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10849 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10850 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10852 ######## NON-ANSI TERMINAL EMULATIONS
10857 # These entries attempt to describe Avatar, a terminal emulation used with
10858 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10859 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10860 # excessively dependent on PC idiosyncracies, but apparently rather popular
10861 # in the BBS world.
10863 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10864 # models that terminfo knows about. An Avatar color attribute is the
10865 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10867 # I wrote these entries while looking at the Avatar spec. I don't have
10868 # the facilities to test them. Let me know if they work, or don't.
10870 # Avatar escapes not used by these entries (because maybe you're smarter
10871 # and more motivated than I am and can figure out how to wrap terminfo
10872 # around some of them, and because they are weird enough to be funny):
10874 # ^L -- clear window/reset current attribute to default
10875 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10877 # bit: 6 5 4 3 2 1 0
10879 # +---+---+ | +---+---+
10881 # | | foreground color
10882 # | foreground intensity
10885 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10886 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10887 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10888 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10889 # (^V^L and ^V^M set the current attribute as a side-effect.)
10890 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10891 # in the pattern, <c> the number of times the pattern
10892 # should be repeated. If either value is 0, no-op.
10893 # The pattern can contain Avatar console codes,
10894 # including other ^V ^Y patterns.
10896 # ^V^O -- clockwise mode on; turn print direction right each time you
10897 # hit a window edge (yes, really). Turned off by CR
10899 # ^V^Q%c -- query the driver
10900 # ^V^R -- driver reset
10901 # ^V^S -- Sound tone (PC-specific)
10902 # ^V^T -- change highlight at current cursor poition to %c
10903 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10904 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10907 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10908 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10909 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10910 # which is the only method that will actually work for multiple highlights.)
10912 # Update by TD - 2004: half of this was inconsistent. Found documentation
10913 # and repaired most of the damage. sgr0 is probably incorrect, but the
10914 # available documentation gives no clues for a workable string.
10915 avatar0|avatar terminal emulator level 0,
10917 cols#80, it#8, lines#25,
10918 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10919 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10920 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10922 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10923 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10925 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10926 avatar0+|avatar terminal emulator level 0+,
10927 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10928 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10929 avatar|avatar1|avatar terminal emulator level 1,
10930 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10931 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10935 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10936 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10937 # '90s), especially in the BBS world, and still has some loyal users due to
10938 # its very small memory footprint and to a cute macro language.
10939 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10940 am, bw, mir, msgr, xenl,
10941 cols#80, it#8, lines#25,
10942 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10943 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10944 cub1=^H, cud1=^C, cuf1=^B,
10945 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10946 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10947 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10948 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10949 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10950 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10951 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10952 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10953 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10954 rbcomm-nam|IBM PC with RBcomm without autowrap,
10956 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10957 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10958 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10959 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10961 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10962 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10963 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10965 ######## LCD DISPLAYS
10968 #### Matrix Orbital
10969 # from: Eric Z. Ayers (eric@ale.org)
10971 # Matrix Orbital 20x4 LCD display
10972 # Command Character is 0xFE (decimal 254, octal 376)
10974 # On this device, cursor addressability isn't possible. The LCD expects:
10975 # 0xfe G <col> <row>
10976 # for cup: %p1 == row and %p2 is column
10979 # cup=\376G%p2%c%p1%c
10980 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10981 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10983 # Alas, there is no cursor upline capability on this display.
10985 # These entries add some 'sanity stuff' to the clear function. That is, it
10986 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10987 # and turns off the cursor blinking and stuff like that.
10989 # NOTE: calling 'beep' turns on the backlight (bell)
10990 # NOTE: calling 'flash' turns it on and back off (visual bell)
10992 MtxOrb|Generic Matrix Orbital LCD display,
10993 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10994 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10995 flash=\376B\001$<200>\376F, home=\376H,
10996 MtxOrb204|20x4 Matrix Orbital LCD display,
10997 cols#20, lines#4, use=MtxOrb,
10998 MtxOrb162|16x2 Matrix Orbital LCD display,
10999 cols#16, lines#2, use=MtxOrb,
11002 ######## OLDER TERMINAL TYPES
11004 # This section is devoted to older commercial terminal brands that are now
11005 # discontinued, but known to be still in use or represented by emulations.
11008 #### AT&T (att, tty)
11010 # This section also includes Teletype-branded VDTs.
11012 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11013 # Boundless Technologies); for details, see the header comment on the ADDS
11016 # These are AT&T's official terminfo entries. All-caps aliases have been
11019 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11020 am, eo, mir, msgr, xon,
11021 cols#80, it#8, lines#24,
11022 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
11023 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11024 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11025 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11026 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11027 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11028 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11029 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11030 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11031 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11032 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11033 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11034 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11036 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11037 mc0@, mc4@, mc5@, use=att2300,
11039 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11040 # Seems upward compatible with vt100, plus ins/del line/char.
11041 # On sgr, the protection parameter is ignored.
11042 # No check is made to make sure that only 3 parameters are output.
11043 # standout= reverse + half-intensity = 3 | 5.
11044 # bold= reverse + underline = 2 | 3.
11045 # note that half-bright blinking doesn't look different from normal blinking.
11046 # NOTE:you must program the function keys first, label second!
11047 # (att4410: a BSD entry has been seen with the following capabilities:
11048 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11049 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11050 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11051 am, hs, mir, msgr, xon,
11052 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11053 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11054 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
11055 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11056 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11057 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11058 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
11059 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
11060 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11061 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11062 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11063 ll=\E[24H, nel=^M^J,
11064 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
11065 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11066 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11068 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11069 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11070 tsl=\E7\E[25;%p1%{1}%+%dH,
11072 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11074 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11076 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11078 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11081 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11083 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11085 # 5410 in terms of a vt100
11086 # (v5410: added <rmam>/<smam> based on init string -- esr)
11087 v5410|att5410 in terms of a vt100,
11088 am, mir, msgr, xon,
11089 cols#80, it#8, lines#24, vt#3,
11090 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11091 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11092 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11093 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
11094 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11095 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11096 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11097 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11098 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11099 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11100 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11102 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
11103 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11104 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11108 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11109 # even! the 5420 has three modes: scroll, window or page mode
11110 # this terminfo should work in scroll or window mode, but doesn't
11111 # take advantage of any of the differences between them.
11113 # Has memory below (2 lines!)
11114 # 3 pages of memory (plus some spare)
11115 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11116 # <hpa>, <hts> would work for these, but these work in both scroll and window
11117 # mode... Unset insert character so insert mode works
11118 # <is1> sets 80 column mode,
11119 # <is2> escape sequence:
11120 # 1) turn off all fonts
11121 # 2) function keys off, keyboard lock off, control display off,
11122 # insert mode off, erasure mode off,
11123 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11124 # 4) reset origin mode
11125 # 5) set line wraparound
11126 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11128 # 8) program ENTER to transmit ^J,
11129 # We use \212 to program the ^J because a bare ^J will get translated by
11130 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11132 # <is3> set screen color to black,
11133 # No representation in terminfo for the delete word key: kdw1=\Ed
11134 # Key capabilities assume the power-up send sequence...
11135 # This <rmcup> is not strictly necessary, but it helps maximize
11136 # memory usefulness: <rmcup=\Ez>,
11137 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11138 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11139 # smkx programs the SYS PF keys to send a set sequence.
11140 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11141 # This string causes them to send the strings <kf1>-<kf8>
11142 # when pressed in SYS PF mode.
11143 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11144 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11145 OTbs, db, mir, xon,
11146 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11147 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11148 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11149 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11150 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11151 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11152 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11153 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11154 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
11155 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11156 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11157 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11158 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11159 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11160 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11161 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11162 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11163 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11164 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11165 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11166 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11167 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11168 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11169 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11172 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11173 cols#132, lm#54, wsl#97,
11174 is1=\E[?3h$<100>, use=att4415,
11176 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11177 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11179 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11180 cols#132, lm#54, wsl#97,
11181 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11184 # Note that this mode permits programming USER PF KEYS and labels
11185 # However, when you program user pf labels you have to reselect
11186 # user pf keys to make them appear!
11187 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11188 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11189 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
11190 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11192 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11193 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11196 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11197 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11200 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11201 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11204 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11205 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11208 att5420_2|AT&T 5420 model 2 80 cols,
11209 am, db, hs, mir, msgr, xon,
11210 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11211 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11212 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11213 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11214 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11215 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11216 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11217 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11218 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11219 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
11220 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11221 indn=\E[%p1%dE, invis=\E[8m,
11222 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11223 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
11224 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
11225 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
11226 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
11227 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11228 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11229 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
11230 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
11231 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
11232 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
11233 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
11234 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11236 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11237 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
11238 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11239 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11240 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
11242 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11245 att4418|att5418|AT&T 5418 80 cols,
11248 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11249 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
11250 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11251 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11252 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
11253 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
11254 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
11255 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
11256 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
11257 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
11258 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
11259 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
11260 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
11261 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
11262 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11263 att4418-w|att5418-w|AT&T 5418 132 cols,
11265 is1=\E[?3h, use=att5418,
11267 att4420|tty4420|teletype 4420,
11268 OTbs, da, db, eo, msgr, ul, xon,
11269 cols#80, lines#24, lm#72,
11270 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
11271 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
11272 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
11273 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
11274 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
11275 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
11276 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
11277 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
11279 # The following is a terminfo entry for the Teletype 4424
11280 # asynchronous keyboard-display terminal. It supports
11281 # the vi editor. The terminal must be set up as follows,
11283 # HIGHLIGHT DEFINITION 3-TONE
11284 # DISPLAY FUNCTION GROUP III
11286 # The second entry below provides limited (a la adm3a)
11287 # operation under GROUP II.
11289 # This must be used with DISPLAY FUNCTION GROUP I or III
11290 # and HIGHLIGHT DEFINITION 3-TONE
11291 # The terminal has either bold or blink, depending on options
11293 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
11294 att4424|tty4424|teletype 4424,
11297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11298 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
11299 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11300 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
11301 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
11302 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
11303 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11304 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
11305 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11306 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11307 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
11309 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
11310 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
11313 att4424-1|tty4424-1|teletype 4424 in display function group I,
11314 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
11317 # This entry is not one of AT&T's official ones, it was translated from the
11318 # 4.4BSD termcap file. The highlight strings are different from att4424.
11319 # I have no idea why this is -- older firmware version, maybe?
11320 # The following two lines are the comment originally attached to the entry:
11321 # This entry appears to avoid the top line - I have no idea why.
11322 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
11323 att4424m|tty4424m|teletype 4424M,
11325 cols#80, it#8, lines#23,
11326 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11327 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
11328 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
11329 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11330 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
11331 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
11332 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
11334 # The Teletype 5425 is really version 2 of the Teletype 5420. It
11335 # is quite similar, except for some minor differences. No page
11336 # mode, for example, so all of the <cup> sequences used above have
11337 # to change back to what's being used for the 5410. Many of the
11338 # option settings have changed their numbering as well.
11340 # This has been tested on a preliminary model.
11342 # (att5425: added <rmam>/<smam> based on the init string -- esr)
11343 att5425|tty5425|att4425|AT&T 4425/5425,
11344 am, da, db, hs, mir, msgr, xenl, xon,
11345 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11346 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11347 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11348 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
11349 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11350 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11351 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11352 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11353 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
11354 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
11355 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
11356 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11357 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
11358 invis=\E[8m, is1=\E<\E[?3l$<100>,
11359 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
11360 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11361 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11362 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
11363 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
11364 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
11365 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
11367 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11368 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
11369 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
11370 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
11371 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
11372 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11373 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11374 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
11375 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
11376 vpa=\E[%p1%{1}%+%dd,
11378 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
11379 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
11381 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
11382 cols#132, lm#54, wsl#97,
11383 is1=\E[?3h$<100>, use=tty5425,
11385 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
11386 # I also added <rmam>/<smam> -- esr)
11387 att4426|tty4426|teletype 4426S,
11389 cols#80, lines#24, lm#48,
11390 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11391 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
11392 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
11393 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11394 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
11395 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
11396 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
11397 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
11398 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
11399 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11400 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
11401 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
11402 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
11403 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
11404 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
11405 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
11408 # Terminfo entry for the AT&T 510 A Personal Terminal
11409 # Function keys 9 - 16 are available only after the
11410 # screen labeled (soft keys/action blocks) are labeled. Function key
11411 # 9 corresponds to the leftmost touch target on the screen,
11412 # function key 16 corresponds to the rightmost.
11414 # This entry is based on one done by Ernie Rice at Summit, NJ and
11415 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
11416 att510a|bct510a|AT&T 510A Personal Terminal,
11417 am, mir, msgr, xenl, xon,
11418 cols#80, lh#2, lines#24, lw#7, nlab#8,
11419 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11420 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11421 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
11422 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11423 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11424 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
11425 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
11426 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
11427 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
11428 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
11429 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
11430 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
11431 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
11432 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
11433 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
11434 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11435 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
11436 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
11437 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
11438 smul=\E[4m, tbc=\E[3g,
11440 # Terminfo entry for the AT&T 510 D Personal Terminal
11441 # Function keys 9 through 16 are accessed by bringing up the
11443 # Function key 9 corresponds to the leftmost touch target on the screen,
11444 # function key 16 corresponds to the rightmost.
11446 # There are problems with soft key labeling. These are due to
11447 # strangenesses in the native terminal that are impossible to
11448 # describe in a terminfo.
11449 att510d|bct510d|AT&T 510D Personal Terminal,
11450 am, da, db, mir, msgr, xenl, xon,
11451 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
11452 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11453 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11454 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
11455 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11456 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11457 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
11458 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
11459 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
11460 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11461 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11462 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
11463 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11464 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
11465 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
11466 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
11467 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
11468 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
11469 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11470 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11471 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
11472 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
11473 rs2=\E[5;0|, sc=\E7,
11474 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11475 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
11476 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
11477 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11479 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
11480 att500|att513|AT&T 513 using page mode,
11481 am, chts, mir, msgr, xenl, xon,
11482 cols#80, lh#2, lines#24, lw#8, nlab#8,
11483 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11484 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11485 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
11486 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11487 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11488 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11489 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
11490 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11491 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11492 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11493 indn=\E[%p1%dE, invis=\E[8m,
11494 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
11495 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11496 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11497 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
11498 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
11499 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
11500 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
11501 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
11502 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11503 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
11504 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11505 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
11506 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
11507 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11508 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11509 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
11510 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
11511 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
11513 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
11514 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
11515 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
11516 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11517 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11518 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
11519 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
11521 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
11522 rs2=\E[5;0|, sc=\E7,
11523 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11524 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
11525 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
11526 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11529 # printer must be set to EMUL ANSI to accept ESC codes
11530 # <cuu1> stops at top margin
11531 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
11532 # and alt font ascii,wrap on,tabs cleared
11533 # <is2> disables newline on LF,Emphasized off
11534 # The <u0> capability sets form length
11535 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
11537 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
11538 orhi#100, orl#12, orvi#72,
11539 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
11541 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
11542 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
11543 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
11544 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
11546 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
11547 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
11548 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
11549 u0=\E[%p1%dt, vpa=\E[%p1%dd,
11551 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
11552 # The following SET-UP modes are assumed for normal operation:
11553 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
11554 # Other SET-UP modes may be set for operator convenience or communication
11555 # requirements. This termcap description is for the Resident Terminal Mode.
11556 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11557 # The BRL entry also said: UNSAFE :ll=\E[70H:
11558 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
11560 cols#88, it#8, lines#70, vt#3,
11561 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11562 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11563 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11564 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
11565 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
11566 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11567 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
11570 # 5620 terminfo (2.0 or later ROMS with char attributes)
11571 # The following SET-UP modes are assumed for normal operation:
11572 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
11573 # Other SET-UP modes may be set for operator convenience or communication
11574 # requirements. This termcap description is for Resident Terminal Mode. No
11575 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11576 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
11577 # Be aware that older versions of the dmd have a firmware bug that affects
11578 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
11579 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
11580 # also has <ll>=\E[70H commented out and marked unsafe.
11581 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
11582 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
11583 OTbs, am, msgr, npc, xon,
11584 cols#88, it#8, lines#70,
11585 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
11586 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
11587 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
11588 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11589 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
11590 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11591 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
11592 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
11593 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
11594 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
11595 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
11596 lines#24, use=att5620,
11597 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
11598 lines#34, use=att5620,
11599 # 5620 layer running the "S" system's downloaded graphics handler:
11600 att5620-s|tty5620-s|layer|vitty|5620 S layer,
11602 cols#80, it#8, lines#72,
11603 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
11604 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
11605 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
11606 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11609 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
11611 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
11612 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
11613 att605|AT&T 605 80 column 102key keyboard,
11615 cols#80, lines#24, lw#8, nlab#8, wsl#80,
11616 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11617 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
11618 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
11619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11620 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11621 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11622 il1=\E[L, ind=^J, invis=\E[8m,
11623 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
11624 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
11625 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11626 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
11627 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
11628 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
11629 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
11630 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
11631 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
11632 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
11633 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
11634 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
11635 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
11636 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
11637 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11638 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11639 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11640 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
11641 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
11642 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
11643 tsl=\E7\E[25;%i%p1%dx,
11644 att605-pc|ATT 605 in pc term mode,
11645 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11646 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
11647 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
11648 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11649 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
11650 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
11651 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
11652 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
11653 xoffc=g, xonc=e, use=att605,
11654 att605-w|AT&T 605-w 132 column 102 key keyboard,
11656 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
11658 # (att610: I added <rmam>/<smam> based on the init string. I also
11659 # added <indn> and <rin> because the BSD file says the att615s have them,
11660 # and the 615 is like a 610 with a big keyboard, and most of their other
11661 # smart terminals support the same sequence -- esr)
11662 att610|AT&T 610; 80 column; 98key keyboard,
11663 am, eslok, hs, mir, msgr, xenl, xon,
11664 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11665 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11666 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11667 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11668 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11669 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11670 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11671 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11672 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11673 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11674 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11675 indn=\E[%p1%dS, invis=\E[8m,
11676 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
11677 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11678 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11679 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11680 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11681 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11682 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
11684 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11685 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11686 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11687 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
11688 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11689 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11690 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
11691 att610-w|AT&T 610; 132 column; 98key keyboard,
11693 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11696 att610-103k|AT&T 610; 80 column; 103key keyboard,
11697 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11698 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11699 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
11700 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
11701 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
11702 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
11703 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11704 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
11705 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
11706 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
11707 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
11708 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
11709 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
11710 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
11712 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11714 att615|AT&T 615; 80 column; 98key keyboard,
11715 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11716 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11717 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11718 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11719 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11720 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11721 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
11722 att615-w|AT&T 615; 132 column; 98key keyboard,
11723 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11724 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11725 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11726 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11727 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11728 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11729 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
11730 att615-103k|AT&T 615; 80 column; 103key keyboard,
11731 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
11732 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
11733 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
11734 # (att620: I added <rmam>/<smam> based on the init string and
11735 # <rin>/<indn> from a BSD termcap -- esr)
11736 att620|AT&T 620; 80 column; 98key keyboard,
11737 am, eslok, hs, mir, msgr, xenl, xon,
11738 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11739 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11740 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11741 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11742 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11743 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11744 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11745 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11746 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11747 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11748 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11749 indn=\E[%p1%dS, invis=\E[8m,
11750 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
11751 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
11752 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11753 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11754 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11755 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
11756 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
11757 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
11758 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
11759 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
11760 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
11761 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11762 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
11763 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11764 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11765 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11766 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
11767 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
11768 rs2=\Ec\E[?3l, sc=\E7,
11769 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
11770 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
11771 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
11772 tsl=\E7\E[25;%i%p1%dx,
11773 att620-w|AT&T 620; 132 column; 98key keyboard,
11775 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11777 att620-103k|AT&T 620; 80 column; 103key keyboard,
11778 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11779 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11780 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
11781 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
11782 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
11783 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
11784 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11785 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
11786 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
11787 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
11788 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
11789 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
11790 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11791 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11792 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
11793 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
11795 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
11797 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11800 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
11801 # The following SETUP modes are assumed for normal operation:
11802 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
11803 # Font_Size=Large Non-Layers_Window_Cols=80
11804 # Non-Layers_Window_Rows=60
11805 # Other SETUP modes may be set for operator convenience or communication
11806 # requirements. Some capabilities assume a printer attached to the Aux EIA
11807 # port. This termcap description is for the Fixed Non-Layers Window. No
11808 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11809 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
11810 att630|AT&T 630 windowing terminal,
11811 OTbs, am, da, db, mir, msgr, npc, xon,
11812 cols#80, it#8, lines#60, lm#0,
11813 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
11814 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11815 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11816 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11817 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11818 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11819 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
11820 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11821 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
11822 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
11823 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
11824 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
11825 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
11826 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
11827 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
11828 rmul=\E[m, rs2=\Ec, sc=\E7,
11829 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
11830 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11831 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
11832 lines#24, use=att630,
11834 # This is the att700 entry for 700 native emulation of the AT&T 700
11835 # terminal. Comments are relative to changes from the 605V2 entry and
11836 # att730 on which the entry is based. Comments show the terminfo
11837 # capability name, termcap name, and description.
11839 # Here is what's going onm in the init string:
11840 # ESC [ 50;4| set 700 native mode (really is 605)
11841 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11842 # ESC [ 53;0| set GenFlow to Xon/Xoff
11843 # ESC [ 8 ;0| set CR on NL
11844 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11845 # ESC [ ? 4 l jump scroll
11846 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11847 # ESC [ ?13 l Labels on
11848 # ESC [ ?15 l parity check = no
11849 # ESC [ 13 l monitor mode off
11850 # ESC [ 20 l LF on NL (not CRLF on NL)
11851 # ESC [ ? 7 h autowrap on
11852 # ESC [ 12 h local echo off
11853 # ESC ( B GO = ASCII
11854 # ESC ) 0 G1 = Special Char & Line Drawing
11855 # ESC [ ? 31 l Set 7 bit controls
11857 # Note: Most terminals, especially the 600 family use Reverse Video for
11858 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11859 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11860 # standout mode with \E[m (all normal attributes). The 730 entry simply
11861 # exits reverse video which would leave other current attributes intact. It
11862 # was assumed the 730 entry to be more correct so rmso has changed. The
11863 # 605V2 has no sequences to turn individual attributes off, thus its setting
11864 # and the rmso/smso settings from the 730.
11866 # Note: For the same reason as above in rmso I changed exit under-score mode
11867 # to specifically turn off underscore, rather than return to all normal
11870 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11871 # capability as pfxl. It was changed here to pfx since pfxl
11872 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11873 # allows strings to be parameters and label values must be programmed as
11874 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11875 # and strings to be parameters. The 605V2 pfx entry should be examined later
11876 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11878 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11879 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11882 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11885 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11887 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11891 # modular 10 pin Connector
11892 # Left side Right side
11893 # Pin 1 2 3 4 5 6 7 8 9 10
11895 # Key (notch) at bottom
11907 # The manual is 189 pages and is loaded with details about the escape codes,
11908 # etc..... Available from AT&T CIC 800-432-6600...
11909 # ask for Document number 999-300-660..
11911 att700|AT&T 700 24x80 column display w/102key keyboard,
11912 am, eslok, hs, mir, msgr, xenl, xon,
11913 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11914 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11915 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11916 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11917 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11918 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11919 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11920 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11921 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11922 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11923 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11924 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11925 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11926 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11927 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11928 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11929 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11930 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11931 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11932 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11933 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11934 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11935 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11936 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11937 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11938 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11939 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11940 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11941 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11942 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11943 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11944 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11945 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11946 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11947 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11948 tsl=\E7\E[99;%i%p1%dx,
11950 # This entry was modified 3/13/90 by JWE.
11951 # fixes include additions of <enacs>, correcting <rep>, and modification
11952 # of <kHOM>. (See comments below)
11953 # att730 has status line of 80 chars
11954 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11955 # the <kf25> and up keys are used for shifted system Fkeys
11956 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11957 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11958 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11959 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11960 # 102, 102+1, or 122 key keyboards
11962 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11963 att730|AT&T 730 windowing terminal,
11964 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11965 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11966 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11967 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11968 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11969 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11970 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11971 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11972 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11973 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11974 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11975 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11976 ind=\ED, invis=\E[8m,
11977 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11978 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11979 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11980 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11981 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11982 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11983 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11984 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11985 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11986 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11987 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11988 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11989 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11990 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11991 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11992 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11993 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11994 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11995 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11996 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11997 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11998 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11999 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12000 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
12001 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
12002 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
12003 lines#41, use=att730,
12004 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
12005 lines#24, use=att730,
12006 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12007 flash=\E[?5l$<200>\E[?5h,
12008 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
12010 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12011 lines#41, use=att730r,
12012 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12013 lines#24, use=att730r,
12015 # The following represents the screen layout along with the associated
12016 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12017 # not appear on the screen but are shown to reference the bezel buttons.
12018 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12019 # position relative to the screen.
12023 # +----------------------------------------------------------------+
12025 # XXXX | kf0 kf24 | XXXX
12028 # XXXX | kf1 kf23 | XXXX
12031 # XXXX | kf2 kf22 | XXXX
12034 # XXXX | kf3 kf21 | XXXX
12037 # XXXX | kf4 kf20 | XXXX
12040 # XXXX | kf5 kf19 | XXXX
12043 # XXXX | kf6 kf18 | XXXX
12049 # +----------------------------------------------------------------+
12051 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12053 # Note: XXXX represents the screen buttons
12059 # The character string sent by key 'kf26' may be user programmable
12060 # to send either \E[16s, or \E[26s.
12061 # The character string sent by key 'krfr' may be user programmable
12062 # to send either \E[17s, or \E[27s.
12064 # Depression of the "CMD" key sends \E! (kcmd)
12065 # Depression of the "MAIL" key sends \E[26s (kf26)
12066 # "REDRAW" same as "REFRESH" (krfr)
12068 # "kf" functions adds carriage return to output string if terminal is in
12071 # The following are functions not covered in the table above:
12073 # Set keyboard character (SKC): \EPn1;Pn2w
12074 # Pn1= 0 Back Space key
12076 # Pn2= Program char (hex)
12078 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12079 # Pn1= Window number (1-39)
12080 # Pn2-Pn5= Y;X;Y;X coordinates
12082 # Screen Selection (SSL): \E[Pnu
12083 # Pn= Window number
12085 # Set Terminal Modes (SM): \E[Pnh
12086 # Pn= 3 Graphics mode
12087 # Pn= > Cursor blink
12088 # Pn= < Enter new line mode
12089 # Pn= = Enter reverse insert/replace mode
12090 # Pn= ? Enter no scroll mode
12092 # Reset Terminal Mode (RM): \E[Pnl
12093 # Pn= 3 Exit graphics mode
12094 # Pn= > Exit cursor blink
12095 # Pn= < Exit new line mode
12096 # Pn= = Exit reverse insert/replace mode
12097 # Pn= ? Exit no scroll mode
12099 # Screen Status Report (SSR): \E[Pnp
12100 # Pn= 0 Request current window number
12101 # Pn= 1 Request current window dimensions
12103 # Device Status Report (DSR): \E[6n Request cursor position
12105 # Call Status Report (CSR): \E[Pnv
12106 # Pn= 0 Call failed
12107 # Pn= 1 Call successful
12109 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12110 # Pn1= Button number to be loaded
12111 # Pn2= Character count of "string"
12112 # Pn3= Key mode being loaded:
12116 # String= Text string (15 chars max)
12118 # Screen Number Report (SNR): \E[Pnp
12119 # Pn= Screen number
12121 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12122 # Pn1= Number of rows available in window
12123 # Pn2= Number of columns available in window
12125 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12126 # Pn1= "Y" Position of cursor
12127 # Pn2= "X" Position of cursor
12129 # Request Answer Back (RAB): \E[c
12131 # Answer Back Response (ABR): \E[?;*;30;VSV
12132 # *= 0 No printer available
12133 # *= 2 Printer available
12134 # V= Software version number
12135 # SV= Software sub version number
12136 # (printer-available field not documented in v1)
12138 # Screen Alignment Aid: \En
12140 # Bell (lower pitch): \E[x
12142 # Dial Phone Number: \EPdstring\
12143 # string= Phone number to be dialed
12145 # Set Phone Labels: \EPpstring\
12146 # string= Label for phone buttons
12148 # Set Clock: \EPchour;minute;second\
12150 # Position Clock: \EPsY;X\
12151 # Y= "Y" coordinate
12152 # X= "X" coordinate
12154 # Delete Clock: \Epr\
12156 # Programming The Function Buttons: \EPfPn;string\
12157 # Pn= Button number (00-06, 18-24)
12158 # (kf00-kf06, kf18-kf24)
12159 # string= Text to sent on button depression
12161 # The following in version 2 only:
12163 # Request For Local Directory Data: \EPp12;\
12165 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12167 # Request for Local Directory Data in print format: \EPp13;\
12169 # Enable 'Prt on Line' mode: \022 (DC2)
12171 # Disable 'Prt on Line' mode: \024 (DC4)
12175 # The following Terminfo entry describes functions which are supported by
12176 # the AT&T 5430/pt505 terminal software version 2 and later.
12177 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12179 cols#80, it#8, lines#24,
12180 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12181 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12182 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
12183 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12184 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12185 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12186 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
12187 il=\E[%p1%dL, il1=\E[L, ind=^J,
12188 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
12189 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12190 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
12191 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
12192 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
12193 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
12194 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12195 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
12196 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
12197 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
12199 # The following Terminfo entry describes functions which are supported by
12200 # the AT&T 5430/pt505 terminal software version 1.
12201 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
12203 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
12204 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
12205 lines#22, use=att505,
12207 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
12208 # This cut mark helps make life less painful for people running ncurses tic
12209 # on machines with relatively little RAM. The file can be broken in half here
12210 # cleanly and compiled in sections -- no `use' references cross this cut
12214 #### Ampex (Dialogue)
12216 # Yes, these are the same people who are better-known for making audio- and
12217 # videotape. I'm told they are located in Redwood City, CA.
12220 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
12221 # (ampex80: some capabilities merged in from SCO's entry -- esr)
12222 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
12224 cols#80, it#8, lines#24,
12225 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
12226 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12227 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
12228 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
12229 smso=\Ej, smul=\El, tbc=\E3,
12230 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
12231 ampex175|ampex d175,
12234 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12235 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12236 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
12237 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
12238 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
12239 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
12240 # No backspace key in the main QWERTY cluster. Fortunately, it has a
12241 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
12242 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
12243 # mode), this key can be used as the erase key; I find I like this. Because
12244 # some people and some systems may not, there is another termcap ("ampex175")
12245 # that suppresses this little eccentricity by omitting the relevant capability.
12246 ampex175-b|ampex d175 using left arrow for erase,
12247 kbs=^_, use=ampex175,
12248 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
12249 # (ampex210: removed obsolete ":kn#10:" -- esr)
12250 ampex210|a210|ampex a210,
12251 OTbs, am, hs, xenl,
12252 cols#80, it#8, lines#24, xmc#1,
12253 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
12254 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12255 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
12256 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
12257 if=/usr/share/tabset/std, il1=\EE, invis@,
12258 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
12259 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
12260 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
12261 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
12262 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
12263 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
12264 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
12265 # and moved the padding to be *after* the caps -- esr)
12266 ampex219|ampex-219|amp219|Ampex with Automargins,
12268 cols#80, it#8, lines#24,
12269 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
12270 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
12271 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
12272 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
12273 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
12274 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
12275 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12276 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
12277 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
12278 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
12279 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
12280 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
12281 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
12282 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
12283 cols#132, lines#24,
12284 bel=^G, cr=^M, cud1=^J, ind=^J,
12285 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
12286 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
12287 ampex232|ampex-232|Ampex Model 232,
12289 cols#80, lines#24, xmc#1,
12290 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
12291 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12292 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
12293 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
12294 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
12295 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
12296 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
12297 kf9=^AI\r, khome=^^, use=adm+sgr,
12298 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
12299 ampex232w|Ampex Model 232 / 132 columns,
12300 cols#132, lines#24,
12301 is2=\E\034Eg\El, use=ampex232,
12303 #### Ann Arbor (aa)
12305 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
12306 # numbers of function keys. At least some used monitors in portrait mode,
12307 # allowing up to 76-character screen heights! They were reachable at:
12309 # Ann Arbor Terminals
12310 # 6175 Jackson Road
12311 # Ann Arbor, MI 48103
12314 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
12315 # can't be found on the Web; I fear they're long dead. R.I.P.
12319 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
12320 # Highly modified 6/22 by Mike O'Brien.
12321 # split out into several for the various screen sizes by dave-yost@rand
12322 # Modifications made 3/82 by Mark Horton
12323 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
12324 # status line moved to top of screen, <flash> removed 5/82
12325 # Some unknown person at SCO then hacked the init strings to make them more
12328 # assumes the following setup:
12329 # A menu: 0000 1010 0001 0000
12330 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12331 # C menu: 56 66 0 0 9600 0110 1100
12332 # D menu: 0110 1001 1 0
12334 # Briefly, the settings are for the following modes:
12335 # (values are for bit set/clear with * indicating our preference
12336 # and the value used to test these termcaps)
12337 # Note that many of these settings are irrelevent to the terminfo
12338 # and are just set to the default mode of the terminal as shipped
12341 # A menu: 0000 1010 0001 0000
12342 # Block/underline cursor*
12343 # blinking/nonblinking cursor*
12344 # key click/no key click*
12345 # bell/no bell at column 72*
12347 # key pad is cursor control*/key pad is numeric
12348 # return and line feed/return for <cr> key *
12349 # repeat after .5 sec*/no repeat
12350 # repeat at 25/15 chars per sec. *
12352 # hold data until pause pressed/process data unless pause pressed*
12353 # slow scroll/no slow scroll*
12354 # Hold in area/don't hold in area*
12355 # functions keys have default*/function keys disabled on powerup
12357 # show/don't show position of cursor during page transmit*
12362 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12363 # Baud rate (9600*)
12365 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
12366 # 1 stop bit*/2 stop bits
12367 # parity error detection off*/on
12369 # keyboard local/on line*
12370 # half/full duplex*
12371 # disable/do not disable keyboard after data transmission*
12373 # transmit entire page/stop transmission at cursor*
12374 # transfer/do not transfer protected characters*
12375 # transmit all characters/transmit only selected characters*
12376 # transmit all selected areas/transmit only 1 selected area*
12378 # transmit/do not transmit line separators to host*
12379 # transmit/do not transmit page tab stops tabs to host*
12380 # transmit/do not transmit column tab stop tabs to host*
12381 # transmit/do not transmit graphics control (underline,inverse..)*
12383 # enable*/disable auto XON/XOFF control
12384 # require/do not require receipt of a DC1 from host after each LF*
12385 # pause key acts as a meta key/pause key is pause*
12393 # XON character (17*)
12394 # XOFF character (19*)
12396 # C menu: 56 66 0 0 9600 0110 1100
12397 # number of lines to print data on (printer) (56*)
12399 # number of lines on a sheet of paper (printer) (66*)
12401 # left margin (printer) (0*)
12403 # number of pad chars on new line to printer (0*)
12405 # printer baud rate (9600*)
12407 # printer parity: 00=odd,01=even*,10=space,11=mark
12408 # printer stop bits: 2*/1
12409 # print/do not print guarded areas*
12411 # new line is: 01=LF,10=CR,11=CRLF*
12415 # D menu: 0110 1001 1 0
12416 # LF is newline/LF is down one line, same column*
12417 # wrap to preceding line if move left from col 1*/don't wrap
12418 # wrap to next line if move right from col 80*/don't wrap
12419 # backspace is/is not destructive*
12421 # display*/ignore DEL character
12422 # display will not/will scroll*
12423 # page/column tab stops*
12424 # erase everything*/erase unprotected only
12426 # editing extent: 0=display,1=line*,2=field,3=area
12431 annarbor4080|aa4080|ann arbor 4080,
12434 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
12435 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
12436 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
12437 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
12439 # Strange Ann Arbor terminal from BRL
12440 aas1901|Ann Arbor K4080 w/S1901 mod,
12443 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
12444 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
12447 # If you're using the GNU termcap library, add
12448 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
12449 # to these capabilities. This is the nonstandard GNU termcap scrolling
12450 # capability, arguments are:
12451 # 1. Total number of lines on the screen.
12452 # 2. Number of lines above desired scroll region.
12453 # 3. Number of lines below (outside of) desired scroll region.
12454 # 4. Total number of lines on the screen, the same as the first parameter.
12455 # The generic Ann Arbor entry is the only one that uses this.
12456 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
12457 OTbs, am, km, mc5i, mir, xon,
12459 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12460 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
12461 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
12462 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12463 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12464 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12465 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
12466 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
12467 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
12468 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12469 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
12470 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
12471 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
12472 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
12473 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
12474 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
12475 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
12476 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12477 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
12478 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
12479 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
12481 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
12482 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12483 vpa=\E[%p1%{1}%+%dd,
12485 aaa+rv|ann arbor ambassador in reverse video,
12486 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
12487 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12488 rs1=\E[H\E[7m\E[J$<156>,
12489 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
12490 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
12491 # Ambassador with the DEC option, for partial vt100 compatibility.
12492 aaa+dec|ann arbor ambassador in dec vt100 mode,
12493 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
12494 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
12495 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
12497 aaa-18|ann arbor ambassador/18 lines,
12499 is2=\E7\E[60;0;0;18p\E8,
12500 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
12502 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
12503 use=aaa+rv, use=aaa-18,
12504 aaa-20|ann arbor ambassador/20 lines,
12506 is2=\E7\E[60;0;0;20p\E8,
12507 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
12509 aaa-22|ann arbor ambassador/22 lines,
12511 is2=\E7\E[60;0;0;22p\E8,
12512 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
12514 aaa-24|ann arbor ambassador/24 lines,
12516 is2=\E7\E[60;0;0;24p\E8,
12517 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
12519 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
12520 use=aaa+rv, use=aaa-24,
12521 aaa-26|ann arbor ambassador/26 lines,
12523 is2=\E7\E[60;0;0;26p\E8,
12524 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
12525 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
12526 aaa-28|ann arbor ambassador/28 lines,
12528 is2=\E7\E[60;0;0;28p\E8,
12529 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
12530 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
12531 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
12534 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12535 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
12536 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
12537 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
12538 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12539 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
12540 use=aaa+rv, use=aaa-30-s,
12541 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
12542 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12543 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
12544 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
12545 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12546 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
12547 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
12549 is2=\E7\E[60;0;0;30p\E8,
12550 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
12551 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
12552 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
12553 use=aaa+rv, use=aaa-30,
12554 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
12555 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12557 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
12558 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12559 use=aaa+rv, use=aaa-30,
12560 aaa-36|ann arbor ambassador/36 lines,
12562 is2=\E7\E[60;0;0;36p\E8,
12563 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
12564 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
12565 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
12566 use=aaa+rv, use=aaa-36,
12567 aaa-40|ann arbor ambassador/40 lines,
12569 is2=\E7\E[60;0;0;40p\E8,
12570 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
12571 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
12572 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
12573 use=aaa+rv, use=aaa-40,
12574 aaa-48|ann arbor ambassador/48 lines,
12576 is2=\E7\E[60;0;0;48p\E8,
12577 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
12578 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
12579 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
12580 use=aaa+rv, use=aaa-48,
12581 aaa-60-s|ann arbor ambassador/59 lines+status,
12584 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12585 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
12586 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12587 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
12588 use=aaa+rv, use=aaa-60-s,
12589 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
12590 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
12591 aaa-60|ann arbor ambassador/60 lines,
12593 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
12595 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
12596 use=aaa+rv, use=aaa-60,
12597 aaa-db|ann arbor ambassador 30/destructive backspace,
12599 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
12601 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
12603 flash=\E[>59h$<100>\E[>59l,
12604 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
12605 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
12606 guru+rv|guru changes for reverse video,
12607 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
12608 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
12609 use=guru+rv, use=guru-33,
12610 guru+s|guru status line,
12612 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
12613 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
12614 tsl=\E[>51h\E[1;%p1%dH\E[2K,
12615 guru-nctxt|guru with no saved context,
12616 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
12617 guru-s|guru-33-s|ann arbor guru/33 lines+status,
12619 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
12620 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12621 guru-24|ann arbor guru 24 lines,
12623 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
12625 guru-44|ann arbor guru 44 lines,
12627 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
12629 guru-44-s|ann arbor guru/44 lines+status,
12631 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
12632 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12633 guru-76|guru with 76 lines by 89 cols,
12635 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
12637 guru-76-s|ann arbor guru/76 lines+status,
12639 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
12640 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12641 guru-76-lp|guru-lp|guru with page bigger than line printer,
12642 cols#134, lines#76,
12643 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
12645 guru-76-w|guru 76 lines by 178 cols,
12646 cols#178, lines#76,
12647 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
12649 guru-76-w-s|ann arbor guru/76 lines+status+wide,
12650 cols#178, lines#75,
12651 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
12652 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12653 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
12654 cols#178, lines#76,
12655 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
12657 aaa-rv-unk|ann arbor unknown type,
12658 lh#0, lw#0, nlab#0,
12659 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
12660 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12662 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
12663 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
12665 #### Applied Digital Data Systems (adds)
12667 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
12668 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
12669 # terminals was merged again. Then AT&T sold the terminal business to
12670 # SunRiver, which later changed its name to Boundless Technologies. The
12671 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
12672 # as of early 1995) are at:
12674 # Boundless Technologies
12675 # 100 Marcus Boulevard
12676 # Hauppauge, NY 11788-3762
12677 # Vox: (800)-231-5445
12678 # Fax: (516)-342-7378
12679 # Web: http://boundless.com
12681 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
12682 # In 1995 Boundless acquired DEC's terminals business.
12685 # Regent: lowest common denominator, works on all regents.
12686 # (regent: renamed ":bc:" to ":le:" -- esr)
12687 regent|Adds Regent Series,
12690 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
12691 home=\EY\s\s, ind=^J, ll=^A,
12692 # Regent 100 has a bug where if computer sends escape when user is holding
12693 # down shift key it gets confused, so we avoid escape.
12694 regent100|Adds Regent 100,
12697 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
12698 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
12699 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
12700 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
12701 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
12702 regent20|Adds Regent 20,
12703 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
12705 regent25|Adds Regent 25,
12706 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
12708 regent40|Adds Regent 40,
12710 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
12711 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12712 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
12713 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
12714 smul=\E0`, use=regent25,
12715 regent40+|Adds Regent 40+,
12716 is2=\EB, use=regent40,
12717 regent60|regent200|Adds Regent 60,
12718 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
12719 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
12721 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
12722 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
12723 viewpoint|addsviewpoint|adds viewpoint,
12726 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
12727 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
12728 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
12729 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
12730 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
12731 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
12732 # Some viewpoints have bad ROMs that foo up on ^O
12733 screwpoint|adds viewpoint with ^O bug,
12734 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
12736 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
12737 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
12738 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
12739 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
12740 # invis=01000100 and %c is the logical or of desired attributes.
12741 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
12743 # Update by TD - 2004:
12745 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
12747 # COMMANDS ASCII CODE
12749 # Address, Absolute ESC,=,row,column
12751 # Aux Port Enable ESC,@
12752 # Aux Port Disable ESC,A
12756 # Cursor forward FF
12759 # Cursor supress ETB
12760 # Cursor enable CAN
12761 # Erase to end of line ESC,T
12762 # Erase to end of page ESC,Y
12765 # Keyboard unlock SO
12766 # Read current cursor position ESC,?
12767 # Set Attribute ESC,0,x (see below for values of x)
12768 # Tag bit reset ESC,(
12769 # Tag bit set ESC,)
12770 # Transparent Print on ESC,3
12771 # Transparent Print off ESC,4
12777 # Half Intensity A 0101
12779 # Half Intensity Blinking C 0103
12780 # Reverse Video P 0120
12781 # Reverse Video Half Intensity Q 0121
12782 # Reverse Video Blinking R 0122
12783 # Reverse Video Half Intensity
12785 # Underlined ` 0140
12786 # Underlined Half Intensity a 0141
12787 # Underlined Blinking b 0142
12788 # Underlined Half Intensity
12790 # Video suppress D 0104
12791 vp3a+|viewpoint3a+|adds viewpoint 3a+,
12793 cols#80, it#8, lines#24,
12794 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
12795 cub1=^H, cud1=^J, cuf1=^L,
12796 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
12797 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
12798 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
12799 nel=^M^J, rev=\E0P\E), rmso=\E(,
12800 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
12801 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
12802 vp60|viewpoint60|addsvp60|adds viewpoint60,
12805 # adds viewpoint 90 - from cornell
12806 # Note: emacs sends ei occasionally to insure the terminal is out of
12807 # insert mode. This unfortunately puts the viewpoint90 IN insert
12808 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
12809 # - :ei=:im=: must be present in the termcap translation.)
12810 # - <xhp> indicates glitch that attributes stick to location
12811 # - <msgr> means it's safe to move in standout mode
12812 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12814 # Function key and label capabilities merged in from SCO.
12815 vp90|viewpoint90|adds viewpoint 90,
12816 OTbs, bw, msgr, xhp,
12818 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
12819 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
12820 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
12821 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
12822 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
12823 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12824 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
12825 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
12826 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
12827 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
12828 # Note: if return acts weird on a980, check internal switch #2
12829 # on the top chip on the CONTROL pc board.
12830 adds980|a980|adds consul 980,
12833 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
12834 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12835 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12836 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12837 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12839 #### C. Itoh Electronics
12841 # As of 1995 these people no longer make terminals (they're still in the
12842 # printer business). Their terminals were all clones of the DEC VT series.
12843 # They're located in Orange County, CA.
12846 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12847 # the delay times and do an auto tab set rather than the indirect
12848 # file used in vt100.
12849 cit80|cit-80|citoh 80,
12852 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12853 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12854 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12855 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12856 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12857 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12858 cit101|citc|C.itoh fast vt100,
12861 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12862 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12863 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12864 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12865 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12866 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12867 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12868 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12870 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12871 # The following termcap entry was created from the Callan cd100 entry. The
12872 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12873 # full selection of combinations of reverse video, underline, and blink.
12874 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12875 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12876 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12877 cit101e|C. Itoh CIT-101e,
12878 OTbs, OTpt, am, mir, msgr,
12879 cols#80, it#8, lines#24,
12880 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12881 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12882 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12883 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12884 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12885 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12886 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12887 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12888 smkx=\E=, smso=\E[7m, smul=\E[4m,
12889 # From: David S. Lawyer, June 1997:
12890 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12891 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12892 # late 1980's CIT Terminals went out of business.
12893 # There is no need to use the initialization string is=... (by invoking
12894 # tset or setterm etc.) provided that the terminal has been manually set
12895 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12896 # compatible it should be in ANSI mode (not VT52). A set-up that
12897 # works is to set all the manually setable stuff to factory defaults
12898 # by pressing ^D in set-up mode. Then increse the brighness with the
12899 # up-arrow key since the factory default will likely be dim on an old
12900 # terminal. Then change any options you want (provided that they are
12901 # compatible with the termcap). For my terminal I set: Screen
12902 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12903 # on. I also set up mine for parity (but you may not need it). Then
12904 # save the setup with ^S.
12905 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12906 cit101e-rv|Citoh CIT-101e (sets reverse video),
12907 am, eo, mir, msgr, xenl, xon,
12908 cols#80, it#8, lines#24,
12909 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12910 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12912 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12913 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12914 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12915 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12916 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12917 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12918 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12919 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12920 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12921 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12922 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12923 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12924 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12925 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12926 cit101e-n|CIT-101e w/o am,
12928 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12930 cit101e-132|CIT-101e with 132 cols,
12932 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12933 cit101e-n132|CIT-101e with 132 cols w/o am,
12936 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12938 # CIE Terminals CIT-500 from BRL
12939 # The following SET-UP modes are assumed for normal operation:
12940 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12941 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12942 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12943 # Other SET-UP modes may be set for operator convenience or communication
12945 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12946 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12947 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12948 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12949 cit500|CIE Terminals CIT-500,
12950 OTbs, OTpt, mir, msgr, xon,
12951 OTkn#10, cols#80, it#8, lines#64, vt#3,
12952 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12953 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12954 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12955 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12956 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12957 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12958 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12959 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12960 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12961 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12962 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12963 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12964 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12965 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12966 rmso=\E[m, rmul=\E[m,
12967 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12968 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12969 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12971 # C. Itoh printers begin here
12972 citoh|ci8510|8510|c.itoh 8510a,
12975 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12976 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12978 citoh-pica|citoh in pica,
12979 is1=\EN, use=citoh,
12980 citoh-elite|citoh in elite,
12983 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12985 citoh-comp|citoh in compressed,
12988 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12990 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12991 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12993 is1=\EP, use=citoh,
12994 citoh-6lpi|citoh in 6 lines per inch mode,
12995 is3=\EA, use=citoh,
12996 citoh-8lpi|citoh in 8 lines per inch mode,
12998 is3=\EB, use=citoh,
13000 #### Control Data (cdc)
13003 cdc456|cdc 456 terminal,
13006 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13007 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13008 el=^V, home=^Y, il1=\EL, ind=^J,
13010 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13014 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13015 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13016 kcuu1=^W, khome=^Y,
13017 cdc721ll|CDC Vikingll,
13019 cols#132, lines#24,
13020 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13021 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13022 kcuu1=^W, khome=^Y,
13023 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13027 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13028 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13029 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
13031 # The following switch/key settings are assumed for normal operation:
13032 # 96 chars SCROLL FULL duplex not BLOCK
13033 # Other switches may be set according to communication requirements.
13034 # Insert/delete-character cannot be used, as the whole display is affected.
13035 # "so" & "se" are commented out until jove handles "sg" correctly.
13038 OTkn#10, cols#80, lines#24,
13039 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13040 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13041 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
13042 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13043 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13044 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13045 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13046 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13047 rs1=\031\030\002\003\017,
13049 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13051 # Part of the long initialization string defines the "DOWN" key to the left
13052 # of the tab key to send an ESC. The real ESC key is positioned way out
13055 # The termcap won't work in 132 column mode due to the way it it moves the
13056 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13057 # handle the 721 in 132 column mode.
13059 # (cdc721: changed :ri: to :sr: -- esr)
13060 cdc721-esc|Control Data 721,
13061 OTbs, OTpt, am, bw, msgr, xon,
13062 OTkn#10, cols#80, it#8, lines#30,
13063 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13064 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13065 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13066 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13067 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
13068 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13069 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13070 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13071 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13072 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
13073 smso=^^D, smul=^\, tbc=^^^RY,
13077 # Getronics is a Dutch electronics company that at one time was called
13078 # `Geveke' and made async terminals; but (according to the company itself!)
13079 # they've lost all their documentation on the command set. The hardware
13080 # documentation suggests the terminals were actually manufactured by a
13081 # Taiwanese electronics company named Cal-Comp. There are known
13082 # to have been at least two models, the 33 and the 50.
13085 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13086 # screen resolution, a larger screen, at least 1 page of memory above and
13087 # below the screen, apparently pages of memory right and left of the screen
13088 # which can be panned, and about 75 function keys (15 function keys x normal,
13089 # shift, control, func A, func B). It also has more setup possibilities than
13090 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13093 # The vt100 emulation works as is. The entry below describes the rather
13094 # non-conformant (but more featureful) ANSI mode.
13096 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13097 visa50|geveke visa 50 terminal in ansi 80 character mode,
13100 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13101 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
13102 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13103 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13104 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13105 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13106 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
13107 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13108 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
13109 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13110 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13111 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
13112 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13113 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13114 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13115 lf3=A insert line, lf4=A delete line, lf5=A clear,
13116 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13117 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
13118 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13119 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13120 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13123 #### Human Designed Systems (Concept)
13125 # Human Designed Systems
13127 # King of Prussia, PA 19406
13128 # Vox: (610)-277-8300
13129 # Fax: (610)-275-5739
13130 # Net: support@hds.com
13132 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13133 # the character-terminal business now (1995) and making X terminals. In
13134 # particular, the whole `Concept' line described here was discontinued long
13138 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13139 # Extensive changes to c108 by arpavax:eric Feb 1982
13140 # Some unknown person at SCO then translated it to terminfo.
13142 # There seem to be a number of different versions of the C108 PROMS
13143 # (with bug fixes in its Z-80 program).
13145 # The first one that we had would lock out the keyboard of you
13146 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13147 # Try that on your C108 and see if it sends a ^S when you type it.
13148 # If so, you have an old version of the PROMs.
13150 # You should configure the C108 to send ^S/^Q before running this.
13151 # It is much faster (at 9600 baud) than the c100 because the delays
13153 # new status line display entries for c108-8p:
13154 # <is3> - init str #3 - setup term for status display -
13155 # set programmer mode, select window 2, define window at last
13156 # line of memory, set bkgnd stat mesg there, select window 0.
13158 # <tsl> - to status line - select window 2, home cursor, erase to
13159 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13161 # <fsl> - from status line - 1/2 bright off, select window 0
13163 # <dsl> - disable status display - set bkgnd status mesg with
13166 # There are probably more function keys that should be added but
13167 # I don't know what they are.
13169 # No delays needed on c108 because of ^S/^Q handshaking
13171 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
13172 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
13173 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
13174 c108-4p|concept108-4p|concept 108 w/4 pages,
13175 OTbs, eslok, hs, xon,
13177 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
13178 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
13179 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
13180 ind=^J, is1=\EK\E!\E F,
13181 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
13182 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
13183 smcup=\EU\Ev 8p\Ep\r\E\025,
13184 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
13185 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
13186 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
13188 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
13189 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
13191 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
13193 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
13194 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
13197 # These have only window relative cursor addressing, not screen
13198 # relative. To get it to work right here, smcup/rmcup (which
13199 # were invented for the concept) lock you into a one page
13200 # window for screen style programs.
13202 # To get out of the one page window, we use a clever trick:
13203 # we set the window size to zero ("\Ev " in rmcup) which the
13204 # terminal recognizes as an error and resets the window to all
13207 # This trick works on c100 but does not on c108, sigh.
13209 # Some tty drivers use cr3 for concept, others use nl3, hence
13210 # the delays on cr and ind below. This padding is only needed at
13211 # 9600 baud and up. One or the other is commented out depending on
13212 # local conventions.
13214 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
13215 # less than 6 but more than 2 will work.
13217 # Note: can't use function keys f7-f10 because they are
13218 # indistinguishable from arrow keys (!), also, del char and
13219 # clear eol use xon/xoff so they probably won't work very well.
13221 # Also note that we don't define insrt/del char/delline/eop/send
13222 # because they don't transmit unless we reset them - I figured
13223 # it was a bad idea to clobber their definitions.
13225 # The <mc5> sequence changes the escape character to ^^ so that
13226 # escapes will be passed through to the printer. Only trouble
13227 # is that ^^ won't be - ^^ was chosen to be unlikely.
13228 # Unfortunately, if you're sending raster bits through to be
13229 # plotted, any character you choose will be likely, so we lose.
13231 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
13232 # cannot be # in is2 because it will hang a c100 with no printer
13234 c100|concept100|concept|c104|c100-4p|hds concept 100,
13235 OTbs, am, eo, mir, ul, xenl,
13236 cols#80, lines#24, pb#9600, vt#8,
13237 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
13238 cub1=^H, cud1=^J, cuf1=\E=,
13239 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
13240 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
13241 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
13242 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
13244 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
13245 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
13246 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
13247 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
13248 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
13249 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
13250 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
13251 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
13252 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
13253 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
13254 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
13255 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
13256 smso=\ED, smul=\EG,
13257 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
13258 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
13259 smso=\EE, use=c100,
13260 oc100|oconcept|c100-1p|old 1 page concept 100,
13264 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
13265 # Lots of notes, originally inline, but ncurses doesn't grok that.
13267 # am: not available in power on mode, but turned on with \E[=107;207h in
13268 # is2=. Also, \E=124l in is2= could have been used to prevent needing
13269 # to specify xenl:, but that would have rendered the last space on the
13270 # last line useless.
13271 # bw: Not available in power on mode, but turned on with \E[=107;207h in
13273 # clear: Could be done with \E[2J alone, except that vi (and probably most
13274 # other programs) assume that this also homes the cursor.
13275 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
13276 # scroll the window, and go back to window 1.
13277 # is2: the string may cause a warning to be issued by tic that it
13278 # found a very long line and that it suspects that a comma is missing
13279 # somewhere. This warning can be ignored (unless it comes up more than
13280 # once). The initialization string contains the following commands:
13282 # [Setup mode items changed from factory defaults:]
13283 # \E)0 set alternate character set to
13285 # ^O set character set to default
13286 # [In case it wasn't]
13287 # \E[m turn off all attributes
13288 # [In case they weren't off]
13289 # \E[=107; cursor wrap and
13290 # 207h character wrap on
13291 # \E[90;3u set Fkey definitions to "transmit"
13293 # \E[92;3u set cursor key definitions to
13294 # "transmit" defaults
13295 # \E[43;1u set shift F13 to transmit...
13297 # \E[44;1u set shift F14 to transmit...
13299 # \E[45;1u set shift F15 to transmit...
13301 # \E[46;1u set shift F16 to transmit...
13303 # \E[200;1u set shift up to transmit...
13305 # \E[201;1u set shift down to transmit...
13307 # \E[202;1u set shift right to transmit...
13309 # \E[203;1u set shift left to transmit...
13311 # \E[204;1u set shift home to transmit...
13313 # \E[212;1u set backtab to transmit...
13315 # \E[213;1u set shift backspace to transmit...
13317 # \E[214;1u set shift del to transmit...
13319 # [Necessary items not mentioned in setup mode:]
13320 # \E[2!w move to window 2
13321 # \E[25;25w define window as line 25 of memory
13322 # \E[!w move to window 1
13323 # \E[2*w show current line of window 2 as
13325 # \E[2+x set meta key to use high bit
13326 # \E[;3+} move underline to bottom of character
13328 # All Fkeys are set to their default transmit definitions with \E[90;3u
13329 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
13330 # setting MUST be redefined or deactivated, because the default is
13331 # contained in almost all of this terminal's Fkey strings! If for some
13332 # reason "quit" cannot be altered, the Fkeys can, but it would be
13333 # necessary to change ^| to ^] in all of these definitions, and add
13334 # \E[2;029!t to is2.
13335 # lines: is set to 24 because this terminal refuses to treat the 25th
13337 # ll: Not available in power on mode, but turned on with \E[=107;207h in
13339 # lm: Pointless, given that this definition locks a single screen of
13340 # memory into view, but what the hey...
13341 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
13342 # other attributes alone), but some programs expect this to turn off
13344 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
13345 # attributes alone), but some programs expect this to turn off
13347 # sgr: Attributes are set on this terminal with the string \E[ followed by
13348 # a list of attribute code numbers (in decimal, separated by
13349 # semicolons), followed by the character m. The attribute code
13352 # 2 for dim (which is ignored in power on mode);
13356 # 8 for not displayable; and
13357 # =99 for protected (except that there are strange side
13358 # effects to protected characters which make them inadvisable).
13359 # The mapping of terminfo parameters to attributes is as follows:
13360 # %p1 (standout) = bold and inverse together;
13361 # %p2 (underline) = underline;
13362 # %p3 (reverse) = inverse;
13363 # %p4 (blink) = blinking;
13364 # %p5 (dim) is ignored;
13365 # %p6 (bold) = bold;
13366 # %p7 (invisible) = not displayable;
13367 # %p8 (protected) is ignored; and
13368 # %p9 (alt char set) = alt char set.
13369 # The code to do this is:
13371 # %?%p1%p6%O IF (standout; bold) OR
13372 # %t;1 THEN OUTPUT ;1
13374 # %?%p2 IF underline
13375 # %t;4 THEN OUTPUT ;4
13378 # %t;5 THEN OUTPUT ;5
13380 # %?%p1%p3%O IF (standout; reverse) OR
13381 # %t;7 THEN OUTPUT ;7
13383 # %?%p7 IF invisible
13384 # %t;8 THEN OUTPUT ;8
13387 # %?%p9 IF altcharset
13388 # %t^N THEN OUTPUT ^N
13389 # %e^O ELSE OUTPUT ^O
13391 # sgr0: Everything is turned off (including alternate character set), since
13392 # there is no way of knowing what it is that the program wants turned
13394 # smul: The "underline" attribute is reconfigurable to an overline or
13395 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
13396 # bottom of the character cell. This was done to allow for more readable
13397 # underlined characters, and to be able to distinguish between an
13398 # underlined space, an underscore, and an underlined underscore.
13399 # xenl: Terminal can be configured to not need this, but this "glitch"
13400 # behavior is actually preferable with autowrap terminals.
13402 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
13403 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
13404 # string modifies the 'O' in kf43 to kf46 to a '$'.
13406 # kcbt was originally ^I but redefined in is2=.
13407 # kHOM was \E[H originally but redefined in is2=, as were a number of
13409 # kDC was originally \177 but redefined in is2=.
13411 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
13412 # tsl: Go to window 2, then do an hpa=.
13414 #------- flash=\E[8;3!}^G\E[3;3!}
13415 #------- flash=\E[?5h$<100>\E[?5l
13416 # There are two ways to flash the screen, both of which have their drawbacks.
13417 # The first is to set the bell mode to video, transmit a bell character, and
13418 # set the bell mode back - but to what? There is no way of knowing what the
13419 # user's old bell setting was before we messed with it. Worse, the command to
13420 # set the bell mode also sets the key click volume, and there is no way to say
13421 # "leave that alone", or to know what it's set to, either.
13422 # The second way to do a flash is to set the screen to inverse video, pad for a
13423 # tenth of a second, and set it back - but like before, there's no way to know
13424 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
13425 # it that way. The point is moot anyway, since vi (and probably other
13426 # programs) assume that by defining flash=, you want the computer to use it
13427 # INSTEAD of bel=, rather than as a secondary type of signal.
13429 #------- cvvis=\E[+{
13430 # The is the power on setting, which is also as visible as the cursor
13432 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
13433 # Windowing is possible, but not defined here because it is also used to
13434 # emulate status line functions. Allowing a program to set a window could
13435 # clobber the status line or render it unusable. There is additional memory,
13436 # but screen scroll functions are destructive and do not make use of it.
13438 #------- dim= Not available in power on mode.
13439 # You have a choice of defining low intensity characters as "half bright" and
13440 # high intensity as "normal", or defining low as "normal" and high as "bold".
13441 # No matter which you choose, only one of either "half bright" or "bold" is
13442 # available at any time, so taking the time to override the default is
13445 #------- prot=\E[=0;99m
13446 # Not defined, because it appears to have some strange side effects.
13447 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13448 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13449 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
13450 # Available, but making them available to programs is inadvisable.
13451 # The code to do this is:
13452 # %?%p1%{24}%< IF ((key; 24) <;
13453 # %p1%{30}%> ((key; 30) >;
13454 # %p1%{54}%< (key; 54) <
13457 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
13458 # %t\E[ THEN OUTPUT \E[
13459 # %p1%d OUTPUT (key) as decimal
13460 # [next line applies to pfx only]
13464 # %p2%s OUTPUT (string) as string
13466 # [DEL chosen as delimiter, but could be any character]
13467 # [implied: ELSE do nothing]
13471 # Not defined since anything it might do could be done faster and easier with
13472 # either Meta-Shift-Reset or the main power switch.
13474 #------- smkx=\E[1!z
13475 #------- rmkx=\E[!z
13476 # These sequences apply to the cursor and setup keys only, not to the
13477 # numeric keypad. But it doesn't matter anyway, since making these
13478 # available to programs is inadvisable.
13479 # For the key definitions below, all sequences beginning with \E$ are
13480 # custom and programmed into the terminal via is2. \E$ also has no
13481 # meaning to any other terminal.
13483 #------- cmdch=\E[;%p1%d!t
13484 # Available, but making it available to programs is inadvisable.
13485 #------- smxon=\E[1*q
13486 # Available, but making it available to programs is inadvisable.
13487 # Terminal will send XON/XOFF on buffer overflow.
13488 #------- rmxon=\E[*q
13489 # Available, but making it available to programs is inadvisable.
13490 # Terminal will not notify on buffer overflow.
13491 #------- smm=\E[2+x
13493 # Available, but making them available to programs is inadvisable.
13496 # It's not made clear in the manuals, but based on other ansi/vt type
13497 # terminals, it's a good guess that this terminal is capable of both
13498 # "transparent print" (which doesn't copy data to the screen, and
13499 # therefore needs mc5i: specified to say so) and "auxilliary print"
13500 # (which does duplicate printed data on the screen, in which case mc4=
13501 # and mc5= should use the \E[?4i and \E[?5i strings instead).
13503 hds200|Human Designed Systems HDS200,
13504 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
13505 cols#80, it#8, lines#24, lm#0,
13506 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
13507 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
13508 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
13509 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13510 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13511 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13512 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13513 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
13514 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13515 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13517 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
13518 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
13519 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13520 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
13521 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
13522 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
13523 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
13524 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
13525 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
13526 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
13527 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
13528 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
13529 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
13530 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
13531 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
13532 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
13533 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
13534 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
13535 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13536 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
13537 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
13538 vpa=\E[%i%p1%dd, use=ansi+pp,
13540 # <ht> through <el> included to specify padding needed in raw mode.
13541 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
13542 avt-ns|concept avt no status line,
13543 OTbs, am, eo, mir, ul, xenl, xon,
13544 cols#80, it#8, lines#24, lm#192,
13545 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13546 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
13547 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13548 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
13549 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13550 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
13551 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
13552 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
13553 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
13554 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
13555 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
13556 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13557 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13558 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
13559 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13560 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
13561 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13562 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
13563 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
13565 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
13566 sgr0=\E[m\016$<1>, smacs=\017$<1>,
13567 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
13568 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13569 vpa=\E[%p1%{1}%+%dd,
13570 avt-rv-ns|concept avt in reverse video mode/no status line,
13571 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13573 avt-w-ns|concept avt in 132 column mode/no status line,
13574 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13576 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
13577 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13578 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
13580 # Concept AVT with status line. We get the status line using the
13581 # "Background status line" feature of the terminal. We swipe the
13582 # first line of memory in window 2 for the status line, keeping
13583 # 191 lines of memory and 24 screen lines for regular use.
13584 # The first line is used instead of the last so that this works
13585 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
13586 # assumes an 8 page AVT but lm isn't currently used anywhere.)
13588 avt+s|concept avt status line changes,
13591 dsl=\E[0*w, fsl=\E[1;1!w,
13592 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
13593 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
13594 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
13595 avt|avt-s|concept-avt|avt w/80 columns,
13596 use=avt+s, use=avt-ns,
13597 avt-rv|avt-rv-s|avt reverse video w/sl,
13598 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13599 use=avt+s, use=avt-ns,
13600 avt-w|avt-w-s|concept avt 132 cols+status,
13601 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13602 use=avt+s, use=avt-ns,
13603 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
13604 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13605 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
13607 #### Contel Business Systems.
13610 # Contel c300 and c320 terminals.
13611 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
13613 cols#80, lines#24, xmc#1,
13614 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13615 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13616 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
13617 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
13618 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
13619 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
13620 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
13621 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
13622 # Contel c301 and c321 terminals.
13623 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
13624 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
13627 #### Data General (dg)
13629 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
13630 # the terminals group at Data General was shut down in 1991; all these
13631 # terminals have thus been discontinued.
13633 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
13634 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
13635 # sequentially, first the unmodified key codes are listed as F1 through F15.
13636 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
13637 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
13638 # F46 through F60. This is done in the private "includes" below whose names
13639 # start with "dgkeys+".
13641 # DG terminals generally support 8 bit characters. For each of these terminals
13642 # two descriptions are supplied:
13643 # 1) A default description for 8 bits/character communications, which
13644 # uses the default DG international character set and keyboard codes.
13645 # 2) A description with suffix "-7b" for 7 bits/character communications.
13646 # This description must use the NON-DEFAULT native keyboard language.
13648 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
13649 # Ctrl/Shift fdkeys (kf34-kf44).
13651 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
13652 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
13653 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
13654 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
13655 kf11=\233011z, kf12=\233012z, kf13=\233013z,
13656 kf14=\233014z, kf15=\233000z, kf16=\233101z,
13657 kf17=\233102z, kf18=\233103z, kf19=\233104z,
13658 kf2=\233002z, kf20=\233105z, kf21=\233106z,
13659 kf22=\233107z, kf23=\233108z, kf24=\233109z,
13660 kf25=\233110z, kf26=\233111z, kf27=\233112z,
13661 kf28=\233113z, kf29=\233114z, kf3=\233003z,
13662 kf30=\233100z, kf31=\233201z, kf32=\233202z,
13663 kf33=\233203z, kf34=\233204z, kf35=\233205z,
13664 kf36=\233206z, kf37=\233207z, kf38=\233208z,
13665 kf39=\233209z, kf4=\233004z, kf40=\233210z,
13666 kf41=\233211z, kf42=\233212z, kf43=\233213z,
13667 kf44=\233214z, kf45=\233200z, kf46=\233301z,
13668 kf47=\233302z, kf48=\233303z, kf49=\233304z,
13669 kf5=\233005z, kf50=\233305z, kf51=\233306z,
13670 kf52=\233307z, kf53=\233308z, kf54=\233309z,
13671 kf55=\233310z, kf56=\233311z, kf57=\233312z,
13672 kf58=\233313z, kf59=\233314z, kf6=\233006z,
13673 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
13674 khome=\233H, kprt=\233i,
13676 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
13677 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
13678 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13679 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
13680 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
13681 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
13682 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
13683 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
13684 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
13685 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
13686 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
13687 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
13688 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
13689 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
13690 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
13691 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
13692 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
13693 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
13694 kf9=\E[009z, khome=\E[H, kprt=\E[i,
13696 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
13697 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
13698 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
13699 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
13700 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
13701 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
13702 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
13703 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
13704 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
13705 kf8=^^x, kf9=^^y, khome=^H,
13707 dgkeys+15|Private entry describing 15 DG mode special keys,
13708 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
13709 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
13710 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
13711 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
13712 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
13713 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
13714 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
13715 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
13716 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
13717 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
13718 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
13721 # Data General color terminals use the "Tektronix" color model. The total
13722 # number of colors varies with the terminal model, as does support for
13723 # attributes used in conjunction with color.
13725 # Removed u7, u8 definitions since they conflict with tack:
13726 # Preserve user-defined colors in at least some cases.
13728 # Default is ACM mode.
13729 # u8=^^F}20^^Fi^^F}21,
13731 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
13733 colors#16, ncv#53, pairs#256,
13735 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13736 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13737 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
13739 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
13742 # Video attributes are coordinated using static variables set by "sgr", then
13743 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
13744 # (D=dim, U=underline, B=blink, R=reverse.)
13745 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
13747 colors#8, ncv#16, pairs#64,
13748 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
13749 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13750 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13751 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13752 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13754 dg+color|Color info for Data General D470C terminals in ANSI mode,
13755 colors#16, ncv#53, pairs#256,
13756 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13757 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13758 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13759 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13762 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
13764 colors#8, ncv#16, pairs#64,
13766 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
13767 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
13768 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
13770 dgmode+color|Color info for Data General D470C terminals in DG mode,
13771 colors#16, pairs#256,
13772 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13773 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13776 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
13778 colors#52, ncv#53, pairs#26,
13779 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
13780 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
13781 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
13782 scp=\036RG2%p1%02X,
13784 # Colors are in the order: normal, reverse, dim, dim + reverse.
13785 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
13787 colors#52, ncv#53, pairs#26,
13788 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
13789 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
13790 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
13791 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
13793 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
13794 # Initialization string 1 sets:
13795 # ^R - vertical scrolling enabled
13796 # ^C - blinking enabled
13797 dg-generic|Generic Data General terminal in DG mode,
13800 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13801 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
13802 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
13803 smul=^T, use=dgkeys+11,
13805 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
13806 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
13807 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
13808 # maybe they were originally nuls (which would fit).
13810 dg200|data general dasher 200,
13813 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13814 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
13815 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
13816 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
13817 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
13820 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
13821 dg210|dg-ansi|Data General 210/211,
13824 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
13825 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13826 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13827 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
13828 smso=\E[7;m, smul=\E[4;m,
13829 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
13830 # courtesy of Carlos Rucalde of Vantage Software, Inc.
13831 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
13832 # I suspect the d200 function keys actually work on the dg211, check it out.)
13833 dg211|Data General d211,
13834 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13835 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13836 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13838 # dg450 from Cornell (not official)
13839 dg450|dg6134|data general 6134,
13840 cub1@, cuf1=^X, use=dg200,
13843 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13844 # having a command to move straight down from any position on the bottom line
13845 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13846 # above have both, the D210/211, for instance, has neither. We must use ANSI
13847 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13848 # backspace on all terminals. This is not so in DG mode.
13849 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13850 # grounds that there is no matching ":ml:"
13851 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13852 OTbs, am, msgr, ul,
13853 cols#80, it#8, lines#24,
13854 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13855 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13856 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13857 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13858 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13859 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13860 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13861 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13862 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13863 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13864 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13865 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13866 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13867 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13868 # Data General 605x
13869 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13870 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13871 # This also matches a posted description of something called a `Dasher 100'
13872 # so there's a dg100 alias here.
13873 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13874 dg6053-old|dg100|data general 6053,
13877 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13878 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13879 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13880 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13881 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13882 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13885 # (Some performance can be gained over the generic DG terminal type)
13886 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13888 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13890 # Like 6053, but adds reverse video and more keypad and function keys.
13891 d200|d200-dg|Data General DASHER D200,
13892 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13893 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13894 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13897 # DASHER D210 series terminals in ANSI mode.
13898 # Reverse video, no insert/delete character/line, 7 bits/character only.
13900 # Initialization string 1 sets:
13901 # <0 - scrolling enabled
13902 # <1 - blink enabled
13903 # <4 - print characters regardless of attributes
13904 d210|d214|Data General DASHER D210 series,
13907 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13908 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13909 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13910 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13911 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13912 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13913 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
13914 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13916 # DASHER D210 series terminals in DG mode.
13917 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13918 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13920 ed=^^FF, use=d200-dg,
13922 # DASHER D211 series terminals in ANSI mode.
13923 # Like the D210, but with 8-bit characters and local printer support.
13925 # Initialization string 2 sets:
13927 # 2;1 - 8 bit operations
13928 # 1;1 - 8 bit (international) keyboard language
13929 # \E(B - default primary character set (U.S. ASCII)
13930 # \E)4 - default secondary character set (international)
13931 # ^O - primary character set
13933 d211|d215|Data General DASHER D211 series,
13935 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13938 # Initialization string 2 sets:
13940 # 2;0 - 7 bit operations
13941 # 1;0 - 7 bit (native) keyboard language
13942 # \E(0 - default character set (the keyboard native language)
13943 # ^O - primary character set
13944 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13946 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13948 # Like the D210 series, but adds support for 8-bit characters.
13950 # Reset string 2 sets:
13951 # ^^N - secondary character set
13952 # ^^FS0> - 8 bit international character set
13953 # ^^O - primary character set
13954 # ^^FS00 - default character set (matching the native keyboard language)
13956 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13958 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13960 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13963 # Enhanced DG mode with changes to be more UNIX compatible.
13964 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13967 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13968 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13969 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13970 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13971 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13972 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13973 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13974 rs2=\036N\036FS0E\036O\036FS00,
13975 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13976 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13977 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13978 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13980 is3=\036Fz2, use=d216+,
13982 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13984 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13987 # DASHER D220 color terminal in ANSI mode.
13988 # Like the D470C but with fewer colors and screen editing features.
13990 # Initialization string 1 sets:
13992 # <0 - scrolling enabled
13993 # <1 - blink enabled
13994 # <4 - print characters regardless of attributes
13995 # \E[m - all attributes off
13996 # Reset string 1 sets:
13997 # \Ec - initial mode defaults (RIS)
13999 d220|Data General DASHER D220,
14001 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14002 use=dg+color8, use=d470c,
14004 d220-7b|Data General DASHER D220 in 7 bit mode,
14006 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14007 use=dg+color8, use=d470c-7b,
14009 # Initialization string 3 sets:
14010 # - default cursor (solid rectangle)
14011 # Reset string 2 sets:
14012 # ^^N - secondary character set
14013 # ^^FS0> - 8 bit international character set
14014 # ^^O - primary character set
14015 # ^^FS00 - default character set (matching the native keyboard language)
14017 d220-dg|Data General DASHER D220 color terminal in DG mode,
14019 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
14020 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14023 # DASHER D230C color terminal in ANSI mode.
14024 # Like the D220 but with minor ANSI compatibility improvements.
14026 d230c|d230|Data General DASHER D230C,
14027 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
14028 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14029 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14030 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14031 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14033 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14036 # DASHER D400/D450 series terminals.
14037 # These add intelligent features like insert/delete to the D200 series.
14039 # Initialization string 2 sets:
14040 # ^^FQ2 - default cursor (solid rectangle)
14041 # ^^FW - character protection disabled
14042 # ^^FJ - normal (80 column) mode
14043 # ^^F\^ - horizontal scrolling enabled (for alignment)
14044 # ^^FX004? - margins at columns 0 and 79
14045 # ^^F] - horizontal scrolling disabled
14046 # ^^O - primary character set
14047 # ^^FS00 - default character set (the keyboard native language)
14048 # - (should reset scrolling regions, but that glitches the screen)
14049 # Reset string 1 sets:
14050 # ^^FA - all terminal defaults except scroll rate
14051 # Reset string 2 sets:
14052 # ^^F] - horizontal scrolling disabled
14053 # ^^FT0 - jump scrolling
14055 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14057 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
14058 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
14059 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
14060 ich1=^^J, il1=^^FH,
14061 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
14062 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
14063 rs1=^^FA, rs2=\036F]\036FT0,
14064 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14065 sgr0=\017\025\035\036E\036O, smacs=^^N,
14066 vpa=\020\177%p1%c, use=d210-dg,
14068 # DASHER D410/D460 series terminals in ANSI mode.
14069 # These add a large number of intelligent terminal features.
14071 # Initialization string 1 sets:
14073 # <0 - scrolling enabled
14074 # <1 - blink enabled
14075 # <2 - horizontal scrolling enabled (for alignment)
14076 # <4 - print characters regardless of attributes
14077 # \E[5;0v - normal (80 column) mode
14078 # \E[1;1;80w - margins at columns 1 and 80
14080 # 1 - print all characters even if protected
14081 # 6 - character protection disabled
14082 # <2 - horizontal scrolling disabled
14083 # - (should reset scrolling regions, but that glitches the screen)
14085 # Initialization string 2 sets:
14087 # 3;2 - default cursor (solid rectangle)
14088 # 2;1 - 8 bit operations
14089 # 1;1 - international keyboard language
14090 # \E(B - default primary character set (U.S. ASCII)
14091 # \E)4 - default secondary character set (international)
14092 # ^O - primary character set
14094 # Reset string 1 sets:
14095 # \Ec - initial mode defaults (RIS)
14096 # \E[<2h - horizontal scrolling disabled
14098 # Reset string 2 sets:
14100 # 4;0 - jump scrolling
14101 # 2;1 - 8 bit operations
14102 # 1;1 - 8 bit (international) keyboard language
14103 # \E(B - default primary character set (U.S. ASCII)
14104 # \E)4 - default secondary character set (international)
14106 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14108 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14109 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14110 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14111 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14112 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14113 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14114 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14115 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14116 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14118 # Initialization string 2 sets:
14120 # 3;2 - default cursor (solid rectangle)
14121 # 2;0 - 7 bit operations
14122 # 1;0 - 7 bit (native) keyboard language
14123 # \E(0 - default character set (the keyboard native language)
14124 # ^O - primary character set
14126 # Reset string 2 sets:
14128 # 4;0 - jump scrolling
14129 # 2;0 - 7 bit operations
14130 # 1;0 - 7 bit (native) keyboard language
14131 # \E(0 - default character set (the keyboard native language)
14133 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
14135 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
14136 rs2=\E[4;0;2;0;1;0v\E(0,
14137 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
14138 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
14140 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
14142 enacs@, rmacs=\036FS00,
14143 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
14144 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
14147 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
14149 # Initialization string 1 sets:
14151 # <0 - scrolling enabled
14152 # <1 - blink enabled
14153 # <2 - horizontal scrolling enabled (for alignment)
14154 # <4 - print characters regardless of attributes
14155 # \E[5;1v - compressed (135 column) mode
14156 # \E[1;1;126 - margins at columns 1 and 126
14158 # 1 - print all characters even if protected
14159 # 6 - character protection disabled
14160 # <2 - horizontal scrolling disabled
14161 # - (should reset scrolling regions, but that glitches the screen)
14163 # Reset string 1 sets:
14164 # \Ec - initial mode defaults (RIS)
14165 # \E[5;1v - compressed (135 column) mode
14166 # \E[1;1;126w - margins at columns 1 and 126
14167 # \E[<2h - horizontal scrolling disabled
14169 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
14171 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14172 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
14174 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
14176 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14177 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
14179 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
14182 # These add intelligent features like scrolling regions.
14183 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
14184 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
14185 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
14186 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
14187 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
14188 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
14189 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
14190 vpa=\036FPFF%p1%2.2X,
14191 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14193 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
14195 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
14196 rs2=\036P@1\036FK\036FX0083,
14197 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
14199 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
14202 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14204 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
14206 clear=\036FG\036PH, fsl=\036F}01\022,
14207 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
14208 tsl=\036F}00\036FP%p1%2.2X18\036PG,
14209 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
14212 # Relative cursor motions are confined to the current window,
14213 # which is not what the scrolling region specification expects.
14214 # Thus, relative vertical cursor positioning must be deleted.
14215 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
14216 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
14217 cud1@, cuu1@, ll@, use=d462+,
14219 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
14221 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
14223 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
14225 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
14227 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
14230 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
14232 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
14234 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
14236 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
14238 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
14241 d430c-dg|d430-dg|Data General D430C in DG mode,
14242 use=d413-dg, use=dg+fixed,
14243 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
14244 use=d413-dg, use=dg+ccc,
14246 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
14247 use=d413-unix, use=dgunix+fixed,
14248 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
14249 use=d413-unix-w, use=dgunix+fixed,
14250 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
14251 use=d413-unix-25, use=dgunix+fixed,
14252 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
14253 use=d413-unix-s, use=dgunix+fixed,
14254 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
14255 use=d413-unix-sr, use=dgunix+fixed,
14256 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
14257 use=d413-unix, use=dgunix+ccc,
14258 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
14259 use=d413-unix-w, use=dgunix+ccc,
14260 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
14261 use=d413-unix-25, use=dgunix+ccc,
14262 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
14263 use=d413-unix-s, use=dgunix+ccc,
14264 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
14265 use=d413-unix-sr, use=dgunix+ccc,
14267 # DASHER D470C color terminal in ANSI mode.
14268 # Like the D460 but with 16 colors and without a compressed mode.
14270 # Initialization string 1 sets:
14272 # <0 - scrolling enabled
14273 # <1 - blink enabled
14274 # <2 - horizontal scrolling enabled (for alignment)
14275 # <4 - print characters regardless of attributes
14276 # \E[1;1;80w - margins at columns 1 and 80
14278 # 1 - print all characters even if protected
14279 # 6 - character protection disabled
14280 # <2 - horizontal scrolling disabled
14281 # - (should reset scrolling regions, but that glitches the screen)
14283 d470c|d470|Data General DASHER D470C,
14284 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14285 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
14286 use=dg+color, use=d460,
14288 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
14289 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14290 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
14291 use=dg+color, use=d460-7b,
14293 # Initialization string 2 sets:
14294 # ^^FQ2 - default cursor (solid rectangle)
14295 # ^^FW - character protection disabled
14296 # ^^F\^ - horizontal scrolling enabled (for alignment)
14297 # ^^FX004? - margins at columns 0 and 79
14298 # ^^F] - horizontal scrolling disabled
14299 # ^^O - primary character set
14300 # ^^FS00 - default character set (the keyboard native language)
14301 # - (should reset scrolling regions, but that glitches the screen)
14303 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
14304 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
14305 use=dgmode+color, use=d460-dg,
14307 # DASHER D555 terminal in ANSI mode.
14308 # Like a D411, but has an integrated phone.
14309 d555|Data General DASHER D555,
14311 d555-7b|Data General DASHER D555 in 7-bit mode,
14313 d555-w|Data General DASHER D555 in wide mode,
14315 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
14317 d555-dg|Data General DASHER D555 series in DG mode,
14320 # DASHER D577 terminal in ANSI mode.
14321 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
14322 d577|Data General DASHER D577,
14324 d577-7b|Data General DASHER D577 in 7-bit mode,
14326 d577-w|Data General DASHER D577 in wide mode,
14328 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
14331 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
14334 # DASHER D578 terminal.
14335 # Like a D577, but without compressed mode; like a D470C in this respect.
14337 # Initialization string 1 sets:
14339 # <0 - scrolling enabled
14340 # <1 - blink enabled
14341 # <2 - horizontal scrolling enabled (for alignment)
14342 # <4 - print characters regardless of attributes
14343 # \E[1;1;80w - margins at columns 1 and 80
14345 # 1 - print all characters even if protected
14346 # 6 - character protection disabled
14347 # <2 - horizontal scrolling disabled
14348 # - (should reset scrolling regions, but that glitches the screen)
14350 d578|Data General DASHER D578,
14351 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
14352 d578-7b|Data General DASHER D578 in 7-bit mode,
14353 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
14355 #### Datamedia (dm)
14357 # Datamedia was headquartered in Nashua, New Hampshire until it went
14358 # out of business in 1993, but the ID plates on the terminals referred
14359 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
14360 # manufacturer which threw out all information about the terminals.
14363 cs10|colorscan|Datamedia Color Scan 10,
14366 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14367 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14368 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14369 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
14370 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14371 cs10-w|Datamedia Color Scan 10 with 132 columns,
14373 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
14375 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
14376 dm1520|dm1521|datamedia 1520,
14378 cols#80, it#8, lines#24,
14379 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
14380 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14381 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
14383 # dm2500: this terminal has both <ich> and <smir>. Applications using
14384 # termcap/terminfo directly (rather than through ncurses) might be confused.
14385 dm2500|datamedia2500|datamedia 2500,
14388 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
14389 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
14390 dch1=\020\010\030\035$<10*>,
14391 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
14392 ich1=\020\034\030\035$<10*>,
14393 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
14394 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
14395 smdc=^P, smir=^P, smso=^N,
14396 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
14397 # also, has a meta-key.
14398 # From: <goldberger@su-csli.arpa>
14399 # (dmchat: ":MT:" changed to ":km:" -- esr)
14400 dmchat|dmchat version of datamedia 2500,
14402 dl1=\020\032\030\035$<2/>,
14403 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
14404 # (dm3025: ":MT:" changed to ":km:" -- esr)
14405 dm3025|datamedia 3025a,
14407 cols#80, it#8, lines#24,
14408 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14409 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
14410 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
14411 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
14412 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
14413 smir=\EP, smso=\EO1,
14414 dm3045|datamedia 3045a,
14415 OTbs, am, eo, km@, ul, xenl,
14416 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
14417 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
14418 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
14419 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
14421 # Datamedia DT80 soft switches:
14422 # 1 0=Jump 1=Smooth
14423 # Autorepeat 0=off 1=on
14424 # Screen 0=Dark 1=light
14425 # Cursor 0=u/l 1=block
14427 # 2 Margin Bell 0=off 1=on
14428 # Keyclick 0=off 1=on
14429 # Ansi/VT52 0=VT52 1=Ansi
14430 # Xon/Xoff 0=Off 1=On
14432 # 3 Shift3 0=Hash 1=UK Pound
14434 # Newline 0=Off 1=On
14435 # Interlace 0=Off 1=On
14437 # 4 Parity 0=Odd 1=Even
14438 # Parity 0=Off 1=On
14439 # Bits/Char 0=7 1=8
14440 # Power 0=60Hz 1=50Hz
14442 # 5 Line Interface 0=EIA 1=Loop
14443 # Aux Interface 0=EIA 1=Loop
14444 # Local Copy 0=Off 1=On
14447 # 6 Aux Parity 0=Odd 1=Even
14448 # Aux Parity 0=Off 1=On
14449 # Aux Bits/Char 0=7 1=8
14450 # CRT Saver 0=Off 1=On
14451 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
14452 dm80|dmdt80|dt80|datamedia dt80/1,
14453 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
14454 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14455 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
14456 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14458 # except in 132 column mode, where it needs a little padding.
14459 # This is still less padding than the vt100, and you can always turn on
14460 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
14462 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
14464 clear=\E[H\E[2J$<50/>, cud1=^J,
14465 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
14466 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
14467 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
14468 dt80-sas|Datamedia DT803/DTX for SAS usage,
14471 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
14472 bel=^G, clear=^L, cr=^M,
14473 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
14474 cub1=^H, cud1=\EB, cuf1=^\,
14475 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
14476 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
14477 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
14478 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
14479 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
14480 smso=\E$2\004, tbc=\E'0,
14482 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
14483 # These aren't end-all Excel termcaps; but do insert/delete char/line
14484 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
14485 # The naming convention has been bent somewhat, with the use of E? (where
14486 # E is for 'Excel') as # a name. This was done to distinguish the entries
14487 # from the other Datamedias in use here, and yet to associate a model of
14488 # the Excel terminals with the regular datamedia terminals that share
14489 # major characteristics.
14490 excel62|excel64|datamedia Excel 62,
14491 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14492 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14494 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
14495 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14496 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14498 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
14499 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
14500 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
14501 smir=\E[4h, use=dt80,
14505 # Falco Data Products
14506 # 440 Potrero Avenue
14507 # Sunnyvale, CA 940864-196
14508 # Vox: (800)-325-2648
14509 # Fax: (408)-745-7860
14510 # Net: techsup@charm.sys.falco.com
14512 # Current Falco models as of 1995 are generally ANSI-compatible and support
14513 # emulations of DEC VT-series, Wyse, and Televideo types.
14516 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
14517 # This terminal was released around 1983 and was discontinued long ago.
14518 # The standout and underline highlights are the same.
14519 falco|ts1|ts-1|falco ts-1,
14521 cols#80, it#8, lines#24,
14522 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14523 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14524 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
14525 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
14526 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
14527 smir=\Eq, smso=\Eg1, smul=\Eg1,
14528 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
14529 OTbs, am, da, db, mir, msgr, ul,
14530 cols#80, it#8, lines#24,
14531 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
14532 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
14533 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
14534 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
14535 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
14536 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
14537 smso=\Eg4, smul=\Eg1,
14538 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
14539 ts100|ts100-sp|falco ts100-sp,
14540 am, mir, msgr, xenl, xon,
14541 cols#80, it#8, lines#24, vt#3,
14542 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14543 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
14544 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14545 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14546 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
14547 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
14548 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
14549 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
14550 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
14551 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14552 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
14553 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
14554 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14555 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
14556 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
14557 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
14559 ts100-ctxt|falco ts-100 saving context,
14560 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
14562 #### Florida Computer Graphics
14565 # Florida Computer Graphics Beacon System, using terminal emulator program
14566 # "host.com", as provided by FCG. This description is for an early release
14567 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
14570 # From: David Bryant <cbosg!djb> 1/7/83
14571 beacon|FCG Beacon System,
14574 bel=\ESTART\r\E37\r\EEND\r$<1>,
14575 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
14576 cub1=^H, cud1=^J, cuf1=\EV,
14577 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
14578 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
14579 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
14580 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
14581 rmul=\ESTART\r\E60\,0\r\EEND\r,
14582 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
14583 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
14584 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
14585 smul=\ESTART\r\E60\,1\r\EEND\r,
14590 # The f1720a differences from ANSI: no auto margin, destructive
14591 # tabs, # of lines, funny highlighting and underlining
14592 f1720|f1720a|fluke 1720A,
14594 cols#80, lines#16, xmc#1,
14595 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
14596 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
14597 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
14598 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
14599 smso=\E[7m, smul=\E[4m,
14601 #### Liberty Electronics (Freedom)
14603 # Liberty Electronics
14604 # 48089 Fremont Blvd
14606 # Vox: (510)-623-6000
14607 # Fax: (510)-623-7021
14609 # From: <faletti@berkeley.edu>
14610 # (f100: added empty <acsc> to suppress a tic warning;
14611 # made this relative to adm+sgr -- note that <invis> isn't
14612 # known to work for f100 but does on the f110. --esr)
14613 f100|freedom|freedom100|freedom model 100,
14614 OTbs, am, bw, hs, mir, msgr, xon,
14616 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
14617 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14618 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
14619 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
14620 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
14621 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
14622 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
14623 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14624 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
14625 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
14626 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14627 f100-rv|freedom-rv|freedom 100 in reverse video,
14628 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
14629 # The f110 and f200 have problems with vi(1). They use the ^V
14630 # code for the down cursor key. When kcud1 is defined in terminfo
14631 # as ^V, the Control Character Quoting capability (^V in insert mode)
14632 # is lost! It cannot be remapped in vi because it is necessary to enter
14633 # a ^V to to quote the ^V that is being remapped!!!
14635 # f110/f200 users will have to decide whether
14636 # to lose the down cursor key or the quoting capability. We will opt
14637 # initially for leaving the quoting capability out, since use of VI
14638 # is not generally applicable to most interactive applications
14639 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
14640 f110|freedom110|Liberty Freedom 110,
14643 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
14644 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
14645 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
14646 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14647 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
14648 smso=\EG<, tsl=\Ef, use=f100,
14649 f110-14|Liberty Freedom 110 14inch,
14651 f110-w|Liberty Freedom 110 - 132 cols,
14652 cols#132, use=f110,
14653 f110-14w|Liberty Freedom 110 14in/132 cols,
14656 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
14657 f200|freedom200|Liberty Freedom 200,
14658 OTbs, am, eslok, hs, mir, msgr, xon,
14659 cols#80, it#8, lines#24, wsl#80,
14660 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
14661 clear=^Z, cnorm=\E.1, cr=^M,
14662 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
14663 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14664 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
14665 flash=\Eo$<200/>\En, fsl=^M, home=^^,
14666 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
14667 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
14668 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14669 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14670 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14671 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
14672 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14673 f200-w|Liberty Freedom 200 - 132 cols,
14674 cols#132, use=f200,
14675 # The f200 has the ability to reprogram the down cursor key. The key is
14676 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
14677 # so powering the terminal off and on will not cause the change to be lost.
14678 f200vi|Liberty Freedom 200 for vi,
14679 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
14680 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
14681 cols#132, use=f200vi,
14685 # Graphon Corporation
14686 # 544 Division Street
14687 # Campbell, CA 95008
14688 # Vox: (408)-370-4080
14689 # Fax: (408)-370-5047
14690 # Net: troy@graphon.com (Troy Morrison)
14693 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
14694 # including one odd hybrid that starts out life on power-up as a character
14695 # terminal, than can be switched to X graphics mode (driven over the serial
14696 # line) by an escape sequence. No info on this beast yet.
14697 # (go140: I added <rmam>/<smam> based on the init string -- esr)
14698 go140|graphon go-140,
14700 cols#80, it#8, lines#24,
14701 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
14702 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14703 ed=\E[J$<10/>, el=\E[K, ht=^I,
14704 if=/usr/share/tabset/vt100, il1=\E[L,
14705 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14706 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
14707 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
14708 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
14709 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
14710 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14711 go140w|graphon go-140 in 132 column mode,
14714 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14716 # Hacked up vt200 termcap to handle GO-225/VT220
14717 # From: <edm@nwnexus.WA.COM>
14718 # (go225: I added <rmam>/<smam> based on the init string -- esr)
14719 go225|go-225|Graphon 225,
14720 OTbs, am, mir, xenl,
14721 cols#80, it#8, lines#25, vt#3,
14722 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
14723 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
14724 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14725 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
14726 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
14727 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14728 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
14729 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
14730 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
14731 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
14732 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
14733 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
14735 #### Harris (Beehive)
14737 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
14738 # Their terminal group is ancient history now (1995) though the parent
14739 # company is still in business.
14742 # Beehive documentation is undated and marked Preliminary and has no figures
14743 # so we must have early Superbee2 (Model 600, according to phone conversation
14744 # with mfr.). It has proved reliable except for some missing padding
14745 # (notably after \EK and <nl> at bottom of screen).
14747 # The key idea is that AEP mode is poison for <cup> & that US's in
14748 # the local memory should be avoided like the plague. That means
14749 # that the 2048 character local buffer is used as 25 lines of 80
14750 # characters, period. No scrolling local memory, folks. It also
14751 # appears that we cannot use naked INS LINE feature since it uses
14752 # US. The sbi fakes <il1> with an 80-space insert that may be too
14753 # slow at low speeds; also spaces get converted to \040 which is
14754 # too long for some programs (not vi). DEL LINE is ok but slow.
14756 # The <nl> string is designed for last line of screen ONLY; cup to
14757 # 25th line corrects the motion inherent in scrolling to Page 1.
14759 # There is one understood bug. It is that the screen appears to
14760 # pop to a new (blank) page after a <nel>, or leave a half-line
14761 # ellipsis to a quad that is the extra 48 memory locations. The
14762 # data received is dumped into memory but not displayed. Not to
14763 # worry if <cup> is being used; the lines not displayed will be,
14764 # whenever the cursor is moved up there. Since <cup> is addressed
14765 # relative to MEMORY of window, nothing is lost; but beware of
14766 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
14767 # therefore, is setenv MORE -c .
14769 # WARNING: Not all features tested.
14771 # Timings are assembled from 3 sources. Some timings may reflect
14772 # SB2/Model 300 that were used if more conservative.
14773 # Tested on a Model 600 at 1200 and 9600 bd.
14775 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
14776 # placed on the keyboard and useless because of AEP, is made
14777 # into a backspace key. In use ESC must be pressed twice (to send)
14778 # and sending ^C must be prefixed by ESC to avoid that weird
14779 # transmit mode associated with ENTER key.
14781 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
14782 # the screen, then it has dropped into ENTER mode; hit
14783 # RESET--ONLINE--!tset.
14785 # As delivered this machine has a FATAL feature that will throw
14786 # it into that strange transmit state (SPOW) if the space bar is
14787 # hit after a CR is received, but before receiving a LF (or a
14790 # The circuits MUST be modified to eliminate the SPOW latch.
14791 # This is done by strapping on chip A46 of the I/O board; cut
14792 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
14793 # chip. This mod has been checked out on a Mod 600 of Superbee II.
14794 # With this modification absurdly high timings on cr are
14797 # NOTE WELL that the rear panel switch should be set to CR/LF,
14800 sb1|beehive superbee,
14801 OTbs, am, bw, da, db, mir, ul, xsb,
14802 cols#80, lines#25, xmc#1,
14803 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
14804 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
14805 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
14806 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
14807 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
14808 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
14809 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
14810 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
14811 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
14812 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
14813 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
14814 smso=\E_1, smul=\E_0, tbc=\E3,
14815 sbi|superbee|beehive superbee at Indiana U.,
14817 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
14819 # Alternate (older) description of Superbee - f1=escape, f2=^C.
14820 # Note: there are at least 3 kinds of superbees in the world. The sb1
14821 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
14822 # The sb3 puts garbage on the bottom of the screen when you scroll with
14823 # the switch in the back set to CRLF instead of AEP. This description
14824 # is tested on the sb2 but should work on all with either switch setting.
14825 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
14826 # the other two if you want to try to hit that tiny escape key.
14827 # This description is tricky: being able to use cup depends on there being
14828 # 2048 bytes of memory and the hairy <nl> string.
14829 superbee-xsb|beehive super bee,
14831 cols#80, it#8, lines#25,
14832 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
14833 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
14834 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14835 home=\EH, ht=^I, hts=\E1,
14836 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14837 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14838 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14839 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14840 # This loses on lines > 80 chars long, use at your own risk
14841 superbeeic|super bee with insert char,
14842 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14843 sb2|sb3|fixed superbee,
14844 xsb@, use=superbee,
14846 #### Beehive Medical Electronics
14848 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14849 # Regarding your question though; Beehive terminals weren't made by Harris.
14850 # They were made by Beehive Medical Electronics in Utah. They went out of
14851 # business in the early '80s.
14853 # (OK, then, I don't know why a couple of these say "harris beehive".)
14856 # Reports are that most of these Beehive entries (except superbee) have not
14857 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14859 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14860 beehive|bee|harris beehive,
14863 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14864 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14865 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14866 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14867 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14868 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14869 smir=\EQ, smso=\EdP, smul=\Ed`,
14870 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14871 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14872 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14873 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14874 # really care, cook up one using ^F -- esr)
14875 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14877 cols#80, it#8, lines#20,
14878 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14879 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14880 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14881 beehive4|bh4|beehive 4,
14884 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14885 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14886 # There was an early Australian kit-built computer called a "Microbee".
14887 # It's not clear whether this is for one of those or for a relative
14889 microb|microbee|micro bee series,
14891 cols#80, it#8, lines#24,
14892 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14893 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14894 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14895 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14896 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14897 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14899 # 8675, 8686, and bee from Cyrus Rahman
14900 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14901 ha8675|harris 8675,
14902 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14903 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14904 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14905 kf8=\177, kf9=\Ee, use=bee,
14906 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14908 ha8686|harris 8686,
14909 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14910 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14911 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14912 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14913 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14918 # Hazeltine appears to be out of the terminal business as of 1995. These
14919 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14920 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14924 # 450 East Pulaski Road
14925 # Greenlawn, New York 11740
14927 # As late as 1993, manuals for the terminal product line could still be
14930 # TRW Customer Service Division
14933 # Fairfield, NJ 07007-2078
14935 # They're now (1998) a subsidiary of General Electric, operating under the
14936 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14937 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14940 # Since <cuf1> is blank, when you want to erase something you
14941 # are out of luck. You will have to do ^L's a lot to
14942 # redraw the screen. h1000 is untested. It doesn't work in
14943 # vi - this terminal is too dumb for even vi. (The code is
14944 # there but it isn't debugged for this case.)
14945 hz1000|hazeltine 1000,
14948 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14950 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14951 hz1420|hazeltine 1420,
14954 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14955 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14956 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14958 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14959 # freakout with out-of-range args and tn3270. No hz since it needs to
14961 hz1500|hazeltine 1500,
14964 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14965 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14966 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14967 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14968 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14969 # h1510 assumed to be in sane escape mode. Else use h1500.
14970 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14971 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14972 # removed incorrect and overridden ":do=^J:" -- esr)
14973 hz1510|hazeltine 1510,
14976 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14977 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14978 el=\E^O, il1=\E^Z, ind=^J,
14980 # The following switch settings are assumed for normal operation:
14981 # FULL CR U/L_CASE ESCAPE
14982 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14983 # Other switches may be set for operator convenience or communication
14985 hz1520|Hazeltine 1520,
14986 OTbs, am, bw, msgr,
14988 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14989 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14990 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14991 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14992 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14993 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14994 # This version works with the escape switch off
14995 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14996 hz1520-noesc|hazeltine 1520,
14999 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15000 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
15001 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
15002 # Note: the h1552 appears to be the first Hazeltine terminal which
15003 # is not braindamaged. It has tildes and backprimes and everything!
15004 # Be sure the auto lf/cr switch is set to cr.
15005 hz1552|hazeltine 1552,
15007 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15008 lf2=red, lf3=green, use=vt52,
15009 hz1552-rv|hazeltine 1552 reverse video,
15010 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
15011 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15012 hz2000|hazeltine 2000,
15015 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
15016 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15017 il1=~\032$<6>, ind=^J, pad=\177,
15018 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15019 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15020 # to work ok. There is one problem though if one types a lot of garbage
15021 # characters very fast vi seems not able to keep up and hangs while trying
15022 # to insert. That's in insert mode while trying to insert in the middle of
15023 # a line. It might be because the Esprit doesn't have insert char and delete
15024 # char as a built in function. Vi has to delete to end of line and then
15025 # redraw the rest of the line.
15026 esprit|Hazeltine Esprit I,
15029 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
15030 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15031 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
15032 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
15033 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
15034 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
15035 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15036 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15037 esprit-am|hazeltine esprit auto-margin,
15039 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15040 # Vi it seems always wants to send a control J for "do" and it turned out
15041 # that the terminal would work somewhat if the auto LF/CR was turned off.
15042 # (hmod1: removed :dn=~^K: -- esr)
15043 hmod1|Hazeltine Modular 1,
15046 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15047 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15048 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15049 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15051 # Hazeltine Executive 80 Model 30 (1554?)
15052 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15053 # Like VT100, except for different "am" behavior.
15054 hazel|exec80|h80|he80|Hazeltine Executive 80,
15056 cols#80, it#8, lines#24, vt#3,
15057 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15058 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15059 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
15060 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15061 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15062 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15063 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15064 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15065 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15066 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15067 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15068 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15074 ibm327x|line mode IBM 3270 style,
15076 clear=^M^J, el=^M, home=^M,
15078 ibm3101|i3101|IBM 3101-10,
15081 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15082 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15083 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
15084 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
15085 ibm3151|IBM 3151 display,
15086 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15087 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15088 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15089 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15090 # removed kend, knp, kpp -TD
15091 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
15092 OTbs, am, mir, msgr,
15093 cols#80, it#8, lines#24,
15094 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
15095 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
15096 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15097 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
15098 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
15099 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
15100 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
15101 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
15102 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
15103 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
15104 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
15105 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
15106 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
15107 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
15108 rmso=\E4@, rmul=\E4@,
15109 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
15110 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
15112 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
15113 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
15114 ibm3162|IBM 3162 display,
15115 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
15116 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
15119 # This really should not use setab/setaf, but it is clear that the
15120 # original terminfo does not toggle red/blue colors as in setb/setf.
15121 ibm3164|i3164|IBM 3164,
15123 colors#8, pairs#64,
15124 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
15125 setab=\E4 %p1%{64}%+%c,
15126 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
15127 smcup=\E!9/N\E>B, use=ibm3161,
15129 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
15131 cols#80, it#8, lines#25,
15132 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15133 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15134 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15135 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15136 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
15137 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
15138 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
15139 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
15140 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
15141 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
15142 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
15143 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
15144 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
15145 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
15146 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
15147 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
15148 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
15149 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
15150 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15151 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
15152 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
15153 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
15154 rmso=\E[m, rmul=\E[m, rs2=\Ec,
15155 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
15156 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15158 ibmaed|IBM Experimental display,
15159 OTbs, am, eo, msgr,
15160 cols#80, it#8, lines#52,
15161 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
15162 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
15163 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
15164 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15165 rmso=\E0, sgr0=\E0, smso=\E0,
15166 ibm-apl|apl|IBM apl terminal simulator,
15167 lines#25, use=dm1520,
15168 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
15169 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
15170 ibmmono|IBM workstation monochrome,
15172 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
15173 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
15174 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
15175 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
15176 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
15177 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
15179 ibmega|IBM Enhanced Color Display,
15180 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15181 nel=^M^J, use=ibmmono,
15182 # This color scheme is assumed in some recent IBM terminal descriptions
15183 # (green on black, emulated on a 16-color terminal).
15184 ibm+color|IBM color definitions,
15185 colors#8, ncv#3, pairs#64,
15187 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
15188 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
15189 ibm+16color|IBM aixterm color definitions,
15190 colors#16, pairs#256,
15191 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
15192 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
15193 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15194 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15195 ibm5154|IBM 5154 Color display,
15196 colors#8, ncv@, pairs#64,
15197 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15199 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
15200 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
15202 ibmvga-c|IBM VGA display color termcap,
15203 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15204 nel=^M^J, use=ibmega-c,
15205 ibmvga|IBM VGA display,
15206 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15207 nel=^M^J, use=ibmega,
15208 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
15209 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
15211 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
15212 ibm6155|IBM 6155 Black & White display,
15213 blink@, bold@, use=ibm5151,
15214 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
15215 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
15217 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
15218 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
15220 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
15222 ibm6154|IBM 6154 Color displays,
15223 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15224 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15225 sgr0=\E[0;10m, use=ibm5154,
15226 ibm6153|IBM 6153 Black & White display,
15227 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15228 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15229 sgr0=\E[0;10m, use=ibm5151,
15230 ibm6153-90|IBM 6153 Black & White display,
15232 blink@, bold@, use=ibm5151,
15233 ibm6153-40|IBM 6153 Black & White display,
15234 cols#40, lines#12, use=ibm6153-90,
15235 ibm8512|ibm8513|IBM color VGA Terminal,
15237 cols#80, it#8, lines#25,
15238 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
15239 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
15240 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
15241 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
15242 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
15243 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
15244 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15245 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
15246 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
15247 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15248 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
15249 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
15250 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15252 hft-c|HFT with Color,
15253 colors#8, pairs#64,
15254 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
15255 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
15256 use=ibm5151, use=ibm+color,
15257 hft-c-old|HFT with Color PC850,
15258 colors#8, pairs#64,
15259 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15261 hft-old|AIWS High Function Terminal,
15264 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15265 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15266 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
15267 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
15268 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15269 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
15270 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15271 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
15272 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
15273 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
15274 ibm-system1|system1|ibm system/1 computer,
15277 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
15278 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
15280 # lft-pc850 : IBM Low Function Terminal Device
15281 # lft "supports" underline, bold, and blink in the sense that the lft code
15282 # sets all the right bits. HOWEVER, depending upon the adapter, these
15283 # attributes may or may not be supported by the device driver.
15284 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
15286 cols#80, it#8, lines#25,
15287 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15288 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
15289 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15290 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15291 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15292 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
15293 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
15294 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
15295 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
15296 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
15297 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
15298 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
15299 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
15300 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
15301 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
15302 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
15303 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
15304 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
15305 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15306 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
15307 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
15308 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
15309 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
15310 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15311 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15313 # "Megapel" refers to the display adapter, which was used with the IBM RT
15315 ibm5081|hft|IBM Megapel Color display,
15316 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
15317 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
15318 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
15321 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
15323 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
15325 ibm8514|IBM 8514/a color VGA display,
15327 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
15328 ibm8514-c|IBM 8514 color display with standout and underline,
15331 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
15332 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
15336 # AIX entries. IBM ships these with AIX 3.2.5.
15337 # -- added rc, sc based on manpage -TD
15338 # Note that we could use ibm+16color, but that is not how IBM defines this one.
15339 aixterm|IBM Aixterm Terminal Emulator,
15341 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15342 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
15343 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15344 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
15345 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
15347 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15348 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
15349 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15350 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
15351 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
15353 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
15354 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15355 tsl=\E[?%p1%dT, use=ibm6153,
15356 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
15357 acsc@, use=aixterm,
15358 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
15359 acsc@, use=aixterm-m,
15361 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
15362 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
15363 use=ibm+16color, use=aixterm,
15365 #### Infoton/General Terminal Corp.
15368 # gt100 sounds like something DEC would come out with. Let's hope they don't.
15369 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
15372 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15373 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
15374 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
15375 ind=^J, rmso=\Ea, smso=\Eb,
15379 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
15380 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
15381 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
15382 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
15383 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
15387 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
15388 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
15389 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
15393 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
15394 ed=^K, ind=^J, ll=^H^\,
15396 # The ICL6402 was actually the Kokusai Display System 6402.
15397 # The 6404 was the KDS7372 (color version of the 6402).
15399 # ICL6404 control codes follow:
15402 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15403 #ctrl-A set SOM position at cursor position
15409 #ctrl-L Cursor right
15410 #ctrl-M Carriage return
15411 #ctrl-N Disable xon/xoff to host
15412 #ctrl-O Enable xon/xoff to host
15413 #ctrl-R Enable bidirectional mode
15414 #ctrl-T Disable bidirectional mode
15415 #ctrl-V Cursor down
15416 #ctrl-Z Clear unprotected data to insert char
15417 #ctrl-^ Cursor home
15420 #ESC lead-in char for multiple character command
15422 #ESC space R execute power on sequence
15423 #ESC ! p1 p2 define scroll region:
15424 # p1 = scroll top line: 20h - 37h
15425 # p1 = scroll bottom line: 20h - 37h
15426 #ESC " unlock keyboard
15427 #ESC # lock keyboard
15428 #ESC $ Semi-graphics mode on
15429 #ESC % Semi-graphics mode off
15430 #ESC & protect mode on
15431 #ESC ' protect mode off
15432 #ESC ( write protect mode off (full intensity)
15433 #ESC ) write protect mode on (half intensity)
15435 #ESC * clear screen
15436 #ESC + clear unprotected data to insert char
15437 #ESC , clear unprotected data to half intensity spaces
15438 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
15439 # p1 = page number 0 - 3
15440 # p2 = row 20h - 7fh
15441 # p3 = column (lo) 20h - 7fh
15442 # p4 = column (hi) 20h - 21h (only 132 col)
15443 #ESC . p1 set cursor style:
15444 # p1 = 0 invisible cursor
15445 # p1 = 1 block blinking cursor
15446 # p1 = 2 block steady cursor
15447 # p1 = 3 underline blinking cursor
15448 # p1 = 4 underline steady cursor
15449 #ESC / transmit cursor location (page, row, column)
15450 #ESC 0 p1 p2 p3 p4 program edit key:
15451 # p1 = edit key code: '@'-'S', '`'-'s'
15452 # p2 p3 p4 = program data (3 bytes)
15455 #ESC 2 clear tab at cursor
15456 #ESC 3 clear all tabs
15457 #ESC 4 send unprotect line to cursor
15458 #ESC 5 send unprotect page to cursor
15459 #ESC 6 send line to cursor
15460 #ESC 7 send page to cursor
15461 #ESC 8 n set scroll mode:
15462 # n = 0 set jump scroll
15463 # n = 1 set smooth scroll
15464 #ESC 9 n control display:
15465 # n = 0 display off
15467 #ESC : clear unprotected data to null
15468 #ESC ; clear unprotected data to insert char
15471 #ESC = p1 p2 address cursor to row, column
15472 # p1 = row 20h - 7fh
15473 # p2 = column (lo) 20h - 7fh
15474 # p3 = column (hi) 20h - 21h (only 132 col)
15475 #ESC > keyclick off
15476 #ESC ? transmit cursor location (row, column)
15478 #ESC @ copy print mode on
15479 #ESC A copy print mode off
15480 #ESC B block mode on
15481 #ESC C block mode off (conversation mode)
15482 #ESC D F set full duplex
15483 #ESC D H set half duplex
15485 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
15486 # 0 = black, 1 = red, 2 = green, 3 = yellow
15487 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
15488 #ESC G n set serial field attribute (n = 30h - 3Fh)
15489 #ESC H n full graphics mode:
15490 # n = 0 exit full graphics mode
15491 # n = 1 enter full graphics mode
15494 #ESC K forward page
15496 #ESC L unformatted page print
15497 #ESC M L move window left (132 col mode only)
15498 #ESC M R move window right (132 col mode only)
15499 #ESC N set page edit (clear line edit)
15500 #ESC O set line edit (clear page edit)
15501 #ESC P formatted page print
15502 #ESC Q character insert
15504 #ESC S send message unprotected only
15505 #ESC T erase line to insert char
15506 #ESC U set monitor mode (see ESC X, ESC u)
15508 #ESC V n select video attribute mode:
15509 # n = 0 serial field attribute mode
15510 # n = 1 parallel character attribute mode
15511 #ESC V 2 n define line attribute:
15512 # n = 0 single width single height
15513 # n = 1 single width double height
15514 # n = 2 double width single height
15515 # n = 3 double width double height
15516 #ESC V 3 n select character font:
15517 # n = 0 system font
15518 # n = 1 user defined font
15519 #ESC V 4 n select screen mode:
15520 # n = 0 page screen mode
15521 # n = 1 virtual screen mode
15522 #ESC V 5 n control mouse mode:
15523 # n = 0 disable mouse
15524 # n = 1 enable sample mode
15525 # n = 2 send mouse information
15526 # n = 3 enable request mode
15527 #ESC W character delete
15528 #ESC X clear monitor mode (see ESC U, ESC u)
15529 #ESC Y erase page to insert char
15531 #ESC Z n send user/status line:
15532 # n = 0 send user line
15533 # n = 1 send status line
15534 # n = 2 send terminal ID
15535 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
15539 # 3 = blink blank (= blank)
15541 # 5 = reverse blank
15542 # 6 = reverse blink
15543 # 7 = reverse blink blank (= reverse blank)
15545 # 9 = underline blank
15546 # : = underline blink
15547 # ; = underline blink blank
15548 # < = reverse underline
15549 # = = reverse underline blank
15550 # > = reverse underline blink
15551 # ? = reverse underline blink blank
15552 # p2, p3: f/grnd, b/grnd colour
15553 # (see ESC F for colours)
15554 # use ZZ for mono, eg.
15555 # ESC [ 0 Z Z for normal
15556 # ESC [ 4 Z Z for inverse etc.
15558 #ESC \ n set page size:
15559 # n = 1 24 lines/page
15560 # n = 2 48 lines/page
15561 # n = 3 72 lines/page
15562 # n = 4 96 lines/page
15563 #ESC ] n set Wordstar mode:
15564 # n = 0 normal (KDS7372) mode
15565 # n = 1 Wordstar mode
15567 #ESC b set foreground colour screen
15569 #ESC c n enter self-test mode:
15570 # n = 0 exit self test mode
15574 # n = 4 screen display test
15575 # n = 5 main/printer port test
15576 # n = 6 mouse port test
15577 # n = 7 graphics board test
15578 # n = 8 graphics memory test
15579 # n = 9 display all 'E'
15580 # n = : display all 'H'
15581 #ESC d set background colour screen
15583 #ESC e n program insert char (n = insert char)
15584 #ESC f text CR load user status line with 'text'
15586 #ESC g display user status line on 25th line
15587 #ESC h display system status line on 25th line
15589 #ESC j reverse linefeed
15590 #ESC k n duplex/local edit mode:
15591 # n = 0 duplex edit mode
15592 # n = 1 local edit mode
15593 #ESC l n select virtual screen:
15596 #ESC m save current config to NVRAM
15597 #ESC n p1 select display screen:
15602 #ESC o p1 p2 set characters/line and attribute:
15603 # p1 = 0 80 chars/line
15605 #ESC o p1 p2 set characters/line and attribute:
15606 # p1 = 0 80 chars/line
15607 # p1 = 1 132 chars/line
15608 # p2 = 0 single width single height
15609 # p2 = 1 single width double height
15610 # p2 = 2 double width single height
15611 # p2 = 3 double width double height
15613 #ESC q insert mode on
15614 #ESC r edit mode on
15615 #ESC s send message all
15616 #ESC t erase line to null
15617 #ESC u clear monitor mode (see ESC U, ESC X)
15618 #ESC v autopage mode on
15619 #ESC w autopage mode off
15620 #ESC x p1 p2 p3 define delimiter code...
15621 #ESC y erase page to null
15623 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
15624 # p1 = starting row
15625 # p2 = starting column
15629 #ESC { p1 p2 p3 p4 configure main port
15630 # (baud, stop bits, parity, word length)
15632 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
15633 # p1 = function key code:
15634 # '1' - ';' normal f1- f11
15635 # '<' - 'F' shifted f1 - f11
15636 # p2 = program mode:
15640 # Ctrl-Y = terminator
15641 # (use Ctrl-P to escape ^P, ^Y )
15643 #ESC } p1 p2 p3 p4 configure printer port
15644 # (baud, stop bits, parity, word length)
15645 #ESC ~ send system status
15647 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
15649 # Entry is by esr going solely on above information and is UNTESTED.
15650 # This actually looks a lot like a Televideo 9xx.
15651 # This entry uses page 0 and is monochrome; I'm not brave enough to try
15652 # to make color work without a test terminal. The <am> capability is a guess.
15653 # The initialization string sets conversation mode, blinking underline cursor,
15654 # full duplex, parallel attribute mode, display user status line, white
15655 # foreground, black background, normal highlight.
15657 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
15660 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
15662 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
15663 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
15664 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
15665 hts=\E1, il1=\EE, invis=\E[1ZZ,
15666 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
15667 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
15668 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
15669 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
15670 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
15671 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
15672 rs2=\Eo1, use=icl6404,
15674 #### Interactive Systems Corp
15676 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
15677 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
15678 # bought out by Sun.
15681 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
15682 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
15683 # ":le=^_:" later overridden -- esr)
15684 intext|Interactive Systems Corporation modified owl 1200,
15686 cols#80, it#8, lines#24, xmc#1,
15687 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
15688 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
15689 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
15690 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
15691 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
15692 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
15693 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
15694 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
15696 intext2|intextii|INTERACTIVE modified owl 1251,
15698 cols#80, lines#24, xmc#0,
15699 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
15700 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15701 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15702 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
15703 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
15704 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
15705 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
15706 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
15707 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
15708 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
15709 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
15712 #### Kimtron (abm, kt)
15714 # Kimtron seems to be history, but as March 1998 these people are still
15715 # offering repair services for Kimtron equipment:
15717 # Com/Pair Monitor Service
15718 # 1105 N. Cliff Ave.
15719 # Sioux Falls, South Dakota 57103
15721 # WATS voice: 1-800/398-4946
15722 # POTS fax: +1 605/338-8709
15723 # POTS voice: +1 605/338-9650
15724 # Email: <compair@sd.cybernex.net>
15725 # Internet/Web: <http://www.com-pair.com>
15727 # Kimtron entries include (undocumented) codes for: enter dim mode,
15728 # enter bold mode, enter reverse mode, turn off all attributes.
15731 # Kimtron ABM 85 added by Dual Systems
15732 # (abm85: removed duplicated ":kd=^J:" -- esr)
15733 abm85|Kimtron ABM 85,
15734 OTbs, am, bw, msgr,
15735 cols#80, it#8, lines#24, xmc#1,
15736 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
15737 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15738 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
15739 if=/usr/share/tabset/stdcrt, il1=\EE,
15740 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
15741 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
15742 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
15743 # Kimtron ABM 85H added by Dual Systems.
15744 # Some notes about the abm85h entries:
15745 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
15746 # firmware revs prior to SP51
15747 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
15748 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
15749 # in some places and NOT software settable i.e., <is2> can't fix it)
15750 # 3) In 85h mode, the arrow keys and special functions transmit when
15751 # the terminal is in dup-edit, and work only locally in local-edit.
15752 # Vi won't swallow `del char' for instance, but <smcup> turns on
15753 # dup-edit anyway so that the arrow keys will work right. If the
15754 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
15755 # <is2>. Note that 920E mode does not have software commands to toggle
15756 # between dup and local edit, so you get whatever was set last on the
15758 # 4) <flash> attribute is nice, but seems too slow to work correctly
15760 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
15761 # are selected, the <xmc@> entry should be removed.
15762 # 6) auto new-line should be on (selectable from setup mode only)
15764 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
15765 abm85h|Kimtron ABM 85H native mode,
15768 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
15770 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
15771 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
15773 abm85e|Kimtron ABM 85H in 920E mode,
15775 bel=^G, dim=\E), flash@,
15776 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
15777 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
15778 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
15781 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
15782 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
15783 # From: <malman@bbn-vax.arpa>
15784 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
15785 kt7|kimtron model kt-7,
15787 cols#80, it#8, lines#24,
15788 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
15789 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15790 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
15791 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
15792 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
15793 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
15794 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15795 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15796 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
15797 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
15798 # other kt7 entry and the adjacent key capabilities). Removed EE which is
15799 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
15800 # but we can't figure out what.
15801 kt7ix|kimtron model kt-7 or 70 in IX mode,
15803 cols#80, it#8, lines#25,
15804 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
15805 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
15806 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15807 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
15808 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
15809 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
15810 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
15811 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15812 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15813 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
15814 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
15815 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
15817 #### Microdata/MDIS
15819 # This was a line of terminals made by McDonnell-Douglas Information Systems.
15820 # These entries come direct from MDIS documentation. I have edited them only
15821 # to move primary names of the form p[0-9] * to aliases, and to comment out
15822 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
15823 # also removed the change history; the last version indicates this is
15824 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
15827 # McDonnell Information Systems Terminal Family History
15828 # =========================================
15830 # Prism-1, Prism-2 and P99:
15831 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
15833 # Prism-4 and Prism-5:
15834 # Slightly less ancient range of Microdata terminals. Follow-on from
15835 # Prism-2, but with many enhancements. P5 has eight display pages.
15838 # A special terminal for use with library systems, primarily in Germany.
15839 # Limited numbers. Similar functionality to P5 (except attributes?).
15841 # Prism-7, Prism-8 and Prism-9:
15842 # More recent range of MDIS terminals, in which P7 and P8
15843 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15844 # The P9 has two emulation modes - P8 and ANSI - and includes a
15845 # large number of the DEC VT220 control sequences. Both
15846 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15848 # Prism-12 and Prism-14:
15849 # Latest range, functionally very similar to the P9. The P14 has a
15850 # black-on-white overscanning screen.
15852 # The terminfo definitions given here are:
15854 # p2 - Prism-2 (or Prism-1 or P99).
15856 # p4 - Prism-4 (and older P7s & P8s).
15857 # p5 - Prism-5 (or Prism-6).
15860 # p8 - Prism-8 (in national or multinational mode).
15861 # p8-w - 132 column version of p8.
15862 # p9 - Prism-9 in ANSI mode.
15863 # p9-w - 132 column version of p9.
15864 # p9-8 - Prism-9 in Prism-8 emulation mode.
15865 # p9-8-w - As p9-8, but with 132 columns.
15867 # p12 - Prism-12 in ANSI mode.
15868 # p12-w - 132 column version of p12.
15869 # p12-m - Prism-12 in MDC emulation mode.
15870 # p12-m-w - As p12-m, but with 132 columns.
15871 # p14 - Prism-14 in ANSI mode.
15872 # p14-w - 132 column version of p14.
15873 # p14-m - Prism-14 in MDC emulation mode.
15874 # p14-m-w - As p14-m, but with 132 columns.
15879 # Includes Prism-1 and basic P99 without SP or MP loaded.
15880 # The simplest form of Prism-type terminal.
15881 # Basic cursor movement and clearing operations only.
15882 # No video attributes.
15884 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15885 # value up, followed by backspace.
15887 prism2|MDC Prism-2,
15890 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15891 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15892 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15893 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15894 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15899 # Includes early versions of P7 & P8.
15900 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15902 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15903 # value up, followed by backspace.
15904 # Cursor key definitions removed because they interfere with vi and csh keys.
15906 prism4|p4|P4|MDC Prism-4,
15907 am, bw, hs, mc5i, msgr,
15908 cols#80, lines#24, wsl#72, xmc#1,
15909 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15910 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15911 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15912 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15913 fsl=^]\345, home=^A,
15914 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15915 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15916 rev=^CD, rmso=^C\s, rmul=^C\s,
15917 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15918 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15919 vpa=\013%p1%{32}%+%c,
15924 # Same definition as p4. Includes Prism-6 (not tested!).
15925 # Does not use any multi-page features.
15927 prism5|p5|P5|MDC Prism-5,
15933 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15935 # Use p4 for very early models of P7.
15936 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15938 prism7|p7|P7|MDC Prism-7,
15939 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15944 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15945 # Supports national and multinational character sets.
15947 # Alternate char set operations only work in multinational mode.
15948 # Use p4 for very early models of P8.
15949 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15950 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15952 prism8|p8|P8|MDC Prism-8,
15953 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15954 vpa=\E[%i%p1%dd, use=p4,
15956 # p8-w: Prism-8 in 132 column mode
15957 # --------------------------------
15959 # 'Wide' version of p8.
15961 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15963 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15965 is2=\E[<12h\E[<14h, use=p8,
15967 # p9: Prism-9 in ANSI mode
15968 # -------------------------
15970 # The "flagship" model of this generation of terminals.
15971 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15973 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15974 # Fixes to deal with terminal firmware bugs:
15975 # . 'ri' uses insert-line since rev index doesn't always
15976 # . 'sgr0' has extra '0' since esc[m fails
15977 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15978 # Not covered in the current definition:
15980 # . Programming Fn keys
15981 # . Graphic characters (defaults correctly to vt100)
15982 # . Padding values (sets xon)
15983 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15985 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15986 am, bw, hs, msgr, xenl, xon,
15987 cols#80, it#8, lines#24, vt#3, wsl#72,
15988 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15989 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15990 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15991 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15992 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15993 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15994 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15995 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15996 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15997 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15998 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15999 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
16000 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
16001 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16002 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
16003 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
16004 rmso=\E[27m, rmul=\E[24m,
16005 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
16007 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16008 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16009 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16012 # p9-w: Prism-9 in 132 column mode
16013 # --------------------------------
16015 # 'Wide' version of p9.
16017 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16019 is2=\E[&p\E[<12l\E F\E[<14h,
16020 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16022 # p9-8: Prism-9 in P8 mode
16023 # ------------------------
16025 # P9 terminal in P8 emulation mode.
16026 # Similar to p8 definition.
16027 # Insertion and deletion operations possible.
16029 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16030 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16031 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16033 # p9-8-w: Prism-9 in P8 and 132 column modes
16034 # ------------------------------------------
16036 # P9 terminal in P8 emulation mode and 132 column mode.
16038 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16039 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16040 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16042 # p12: Prism-12 in ANSI mode
16043 # ---------------------------
16045 # See p9 definition.
16047 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16050 # p12-w: Prism-12 in 132 column mode
16051 # ----------------------------------
16053 # 'Wide' version of p12.
16055 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
16058 # p12-m: Prism-12 in MDC emulation mode
16059 # -------------------------------------
16061 # P12 terminal in MDC emulation mode.
16062 # Similar to p8 definition.
16063 # Insertion and deletion operations possible.
16065 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
16068 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
16069 # -------------------------------------------------------
16071 # P12 terminal in MDC emulation mode and 132 column mode.
16073 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
16076 # p14: Prism-14 in ANSII mode
16077 # ---------------------------
16079 # See p9 definition.
16081 prism14|p14|P14|MDC Prism-14 in ANSII mode,
16084 # p14-w: Prism-14 in 132 column mode
16085 # ----------------------------------
16087 # 'Wide' version of p14.
16089 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
16092 # p14-m: Prism-14 in MDC emulation mode
16093 # -------------------------------------
16095 # P14 terminal in MDC emulation mode.
16096 # Similar to p8 definition.
16097 # Insertion and deletion operations possible.
16099 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
16102 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
16103 # -------------------------------------------------------
16105 # P14 terminal in MDC emulation mode and 132 column mode.
16107 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
16110 # End of McDonnell Information Systems Prism definitions
16112 # These things were popular in the Pick database community at one time
16113 # From: George Land <georgeland@aol.com> 24 Sep 1996
16114 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
16116 cols#80, lines#24, ma#1, wsl#78, xmc#1,
16117 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
16118 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
16119 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
16120 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
16121 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
16122 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
16123 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16124 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
16125 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
16126 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
16129 #### Microterm (act, mime)
16131 # The mime1 entries refer to the Microterm Mime I or Mime II.
16132 # The default mime is assumed to be in enhanced act iv mode.
16135 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
16136 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
16137 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
16138 # since Sytek insists ^S means xoff.
16139 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
16140 act4|microterm|microterm act iv,
16143 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
16144 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
16145 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
16146 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
16147 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
16149 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
16150 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
16151 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
16152 act5|microterm5|microterm act v,
16153 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
16155 # Mimes using brightness for standout. Half bright is really dim unless
16156 # you turn up the brightness so far that lines show up on the screen.
16157 mime-fb|full bright mime1,
16158 is2=^S\E, rmso=^S, smso=^Y, use=mime,
16159 mime-hb|half bright mime1,
16160 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
16161 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
16162 # the more plausible ":do=^J:" -- esr)
16163 # uc was at one time disabled to get around a curses bug, be wary of it
16164 mime|mime1|mime2|mimei|mimeii|microterm mime1,
16166 cols#80, it#8, lines#24, vt#9,
16167 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
16168 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
16169 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
16170 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
16171 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
16172 # These termcaps (for mime2a) put the terminal in low intensity mode
16173 # since high intensity mode is so obnoxious.
16174 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
16177 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16178 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
16179 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
16180 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
16181 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
16182 smir=\EE, smso=\E\:, smul=\E6,
16183 # This is the preferred mode (but ^X can't be used as a kill character)
16184 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
16186 cols#80, it#8, lines#24,
16187 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16188 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
16189 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
16190 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
16191 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
16192 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
16193 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
16194 mime3a|mime1 emulating 3a,
16196 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
16197 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
16199 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
16201 # Wed Mar 9 18:53:21 1983
16202 # We run our terminals at 2400 baud, so there might be some timing problems at
16203 # higher speeds. The major improvements in this model are the terminal now
16204 # scrolls down and insert mode works without redrawing the rest of the line
16205 # to the right of the cursor. This is done with a bit of a kludge using the
16206 # exit graphics mode to get out of insert, but it does not appear to hurt
16207 # anything when using vi at least. If you have some users using act4s with
16208 # programs that use curses and graphics mode this could be a problem.
16209 mime314|mm314|mime 314,
16212 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
16213 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
16214 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
16215 # Microterm mime 340 from University of Wisconsin
16216 mm340|mime340|mime 340,
16218 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16219 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16220 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
16221 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
16222 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
16223 # This came from University of Wisconsin marked "astro termcap for jooss".
16224 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
16225 # also added <rmam>/<smam> based on the init string -- esr)
16226 mt4520-rv|micro-term 4520 reverse video,
16227 am, hs, msgr, xenl, xon,
16228 cols#80, it#8, lines#24, wsl#80,
16229 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
16230 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16231 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16232 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16233 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16234 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
16235 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
16236 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
16237 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
16238 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16239 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
16240 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
16241 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
16242 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
16243 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
16244 tbc=\E[g, tsl=\E[25;1H,
16246 # Fri Aug 5 08:11:57 1983
16247 # This entry works for the ergo 4000 with the following setups:
16248 # ansi,wraparound,newline disabled, xon/xoff disabled in both
16251 # WARNING!!! There are multiple versions of ERGO 4000 microcode
16252 # Be advised that very early versions DO NOT WORK RIGHT !!
16253 # Microterm does have a ROM exchange program- use it or lose big
16254 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
16255 ergo4000|microterm ergo 4000,
16258 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
16259 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16260 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
16261 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
16262 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
16263 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16264 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
16265 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
16266 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
16267 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
16272 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
16273 # For what happened to that group, see the ADDS section.
16275 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
16278 # The following vendor-supplied termcaps were captured from the Boundless
16279 # Technologies site, 8 March 1998. I removed all-upper-case names that were
16280 # identical, except for case, to lower-case ones. I also uncommented the acsc
16283 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16284 # DEC vt200/300 with color capabilities added.
16285 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16286 colors#8, pairs#64,
16287 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16289 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16290 # DEC vt200/300 with color capabilities added.
16291 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16292 colors#8, pairs#64,
16293 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16294 use=ncr260vt300wan,
16295 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16296 # DEC vt200/300 with color capabilities added.
16297 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
16298 colors#8, pairs#64,
16299 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16301 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
16302 # DEC vt200/300 with color capabilities added.
16303 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
16304 colors#8, pairs#64,
16305 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16306 use=ncr260vt300wpp,
16307 # This definition for ViewPoint supports several attributes. This means
16308 # that it has magic cookies (extra spaces where the attributes begin).
16309 # Some applications do not function well with magic cookies. The System
16310 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16311 # If supporting various attributes is not vital, 'xmc#1' and the extra
16312 # attributes can be removed.
16313 # Mapping to ASCII character set ('acsc' capability) can also be
16314 # restored if needed.
16315 ncr260vppp|NCR 2900_260 viewpoint,
16316 am, bw, hs, km, mc5i, mir, msgr, xon,
16317 cols#80, lines#24, nlab#32, xmc#1,
16318 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16319 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
16320 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
16321 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
16322 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
16323 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
16324 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
16325 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16326 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
16327 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
16328 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
16329 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
16330 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
16331 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
16332 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
16333 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
16334 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
16335 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
16336 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
16337 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
16338 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
16339 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16340 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16341 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
16342 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
16343 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
16345 cup=\Ea%i%p1%dR%p2%dC$<30>,
16346 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16347 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16349 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
16350 am, hs, mir, msgr, xenl, xon,
16351 cols#80, lines#24, nlab#32,
16352 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16353 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16354 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16355 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
16356 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16357 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16358 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16359 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16360 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16361 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
16362 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
16363 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
16364 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
16366 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16367 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16368 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
16369 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
16370 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
16371 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
16372 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16374 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16375 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
16376 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
16377 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
16378 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
16380 cup=\E[%i%p1%d;%p2%dH$<30>,
16381 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16382 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16384 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
16385 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16386 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16387 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16388 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
16389 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
16390 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16391 smkx=\E=, use=ncr260vt100an,
16392 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
16394 cup=\E[%i%p1%d;%p2%dH$<30>,
16395 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16396 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16398 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
16399 am, hs, mir, msgr, xenl, xon,
16400 cols#80, lines#24, nlab#32,
16401 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16402 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16403 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16404 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16405 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16406 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16407 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16408 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16409 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16410 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16411 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16412 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16413 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16414 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16415 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16416 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16417 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16418 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16419 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
16420 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
16421 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
16422 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
16423 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
16424 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
16425 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
16426 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
16427 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
16428 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
16429 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16431 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16432 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16433 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16434 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16436 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
16438 cup=\E[%i%p1%d;%p2%dH$<30>,
16439 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16440 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16442 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
16443 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16444 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16445 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16446 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16448 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
16450 cup=\E[%i%p1%d;%p2%dH$<30>,
16451 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16452 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16454 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
16455 am, hs, mir, msgr, xenl, xon,
16456 cols#80, lines#24, nlab#32,
16457 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16458 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16459 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16460 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16461 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16462 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16463 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16464 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16465 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16466 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16467 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16468 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16469 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16470 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16471 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16472 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16473 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16474 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16475 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
16476 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
16477 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
16478 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
16479 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
16480 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16481 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
16482 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
16483 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
16485 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16487 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16488 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16489 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16490 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16492 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
16494 cup=\E[%i%p1%d;%p2%dH$<30>,
16495 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16496 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16498 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
16499 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16500 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16501 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16502 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16504 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
16506 cup=\E[%i%p1%d;%p2%dH$<30>,
16507 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16508 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16510 # This terminfo file contains color capabilities for the Wyse325 emulation of
16511 # the NCR 2900/260C color terminal. Because of the structure of the command
16512 # (escape sequence) used to set color attributes, one of the fore/background
16513 # colors must be preset to a given value. I have set the background color to
16514 # black. The user can change this setup by altering the last section of the
16515 # 'setf' definition. The escape sequence to set color attributes is
16516 # ESC d y <foreground_color> <background_color> 1
16517 # In addition, the background color can be changed through the desk accessories.
16518 # The capablitiy 'op' sets colors to green on black (default combination).
16520 # NOTE: The NCR Unix System Administrator's Shell will not function properly
16521 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
16522 # capability and recompile if you wish to have it included.
16524 ncr260wy325pp|NCR 2900_260 wyse 325,
16525 am, bw, hs, km, mc5i, mir, msgr, xon,
16526 colors#16, cols#80, lines#24, ncv#33, nlab#32,
16527 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16528 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
16529 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16530 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16531 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16532 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
16533 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16534 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16535 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16536 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
16537 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
16538 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
16539 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
16540 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
16541 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
16542 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
16543 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16544 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
16545 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16546 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16547 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16548 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16549 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16551 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
16552 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
16553 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16555 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
16557 cup=\Ea%i%p1%dR%p2%dC$<30>,
16558 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16559 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16561 # This definition for Wyse 350 supports several attributes. This means
16562 # that it has magic cookies (extra spaces where the attributes begin).
16563 # Some applications do not function well with magic cookies. The System
16564 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16565 # If supporting various attributes is not vital, 'xmc#1' and the extra
16566 # attributes can be removed.
16567 # Mapping to ASCII character set ('acsc' capability) can also be
16568 # restored if needed.
16569 # In addition, color capabilities have been added to this file. The drawback,
16570 # however, is that the background color has to be black. The foreground colors
16571 # are numbered 0 through 15.
16573 # NOTE: The NCR Unix System Administrator's Shell does not function properly
16574 # with the 'pairs' capability defined as below. If you wish to
16575 # have it included, Un-comment it and recompile (using 'tic').
16577 ncr260wy350pp|NCR 2900_260 wyse 350,
16578 am, bw, hs, km, mc5i, mir, msgr, xon,
16579 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
16580 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16581 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16582 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16583 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
16584 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16585 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
16586 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16587 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16588 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16589 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16590 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16591 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16592 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16593 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16594 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16595 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16596 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16597 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16598 mc0=\EP$<10>, mc4=^T, mc5=^R,
16599 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
16600 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16601 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16602 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16604 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
16605 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
16606 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16608 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
16610 cup=\Ea%i%p1%dR%p2%dC$<30>,
16611 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16612 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16614 # This definition for Wyse 50+ supports several attributes. This means
16615 # that it has magic cookies (extra spaces where the attributes begin).
16616 # Some applications do not function well with magic cookies. The System
16617 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16618 # If supporting various attributes is not vital, 'xmc#1' and the extra
16619 # attributes can be removed.
16620 # Mapping to ASCII character set ('acsc' capability) can also be
16621 # restored if needed.
16622 # (ncr260wy50+pp: originally contained commented-out
16623 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
16624 ncr260wy50+pp|NCR 2900_260 wyse 50+,
16625 am, bw, hs, km, mc5i, mir, msgr, xon,
16626 cols#80, lines#24, nlab#32, xmc#1,
16627 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
16628 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16629 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16630 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
16631 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16632 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
16633 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
16635 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16636 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16637 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16638 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16639 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16640 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16641 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16642 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16643 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16644 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16645 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16646 mc0=\EP$<10>, mc4=^T, mc5=^R,
16647 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16648 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16649 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16650 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16651 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
16652 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
16653 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
16655 cup=\Ea%i%p1%dR%p2%dC$<30>,
16656 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16657 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16659 ncr260wy60pp|NCR 2900_260 wyse 60,
16660 am, bw, hs, km, mc5i, mir, msgr, xon,
16661 cols#80, lines#24, nlab#32,
16662 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16663 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
16664 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16665 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16666 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16667 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
16668 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
16670 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16671 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16672 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
16673 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16674 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16675 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
16676 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
16677 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
16678 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
16679 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
16680 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16681 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16682 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
16683 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16684 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16685 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16686 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
16687 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
16689 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
16691 cup=\Ea%i%p1%dR%p2%dC$<30>,
16692 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16693 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16695 ncr160vppp|NCR 2900_160 viewpoint,
16697 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
16699 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
16701 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
16703 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
16704 use=ncr260vt100wan,
16705 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
16706 use=ncr260vt100wpp,
16707 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
16709 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
16711 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
16712 use=ncr260vt200wan,
16713 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
16714 use=ncr260vt200wpp,
16715 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
16717 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
16719 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
16720 use=ncr260vt300wan,
16721 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
16722 use=ncr260vt300wpp,
16723 ncr160wy50+pp|NCR 2900_160 wyse 50+,
16725 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
16726 use=ncr260wy50+wpp,
16727 ncr160wy60pp|NCR 2900_160 wyse 60,
16729 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
16731 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
16732 am, hs, mc5i, mir, msgr, xon,
16733 cols#80, it#8, lines#24, nlab#32,
16734 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
16735 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
16736 clear=\E[2J\E[1;1H$<300>, cr=^M,
16737 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
16738 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
16739 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
16740 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
16741 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
16742 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
16743 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
16744 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
16745 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
16747 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
16748 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
16749 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
16750 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
16751 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
16752 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
16753 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
16755 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
16756 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
16757 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
16759 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
16761 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
16762 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
16765 # Vendor-supplied NCR termcaps end here
16767 # NCR7900 DIP switches:
16771 # 5 - Parity (Odd/Even)
16772 # 6 - Don't Send or Do Send Spaces
16773 # 7 - Parity Enable
16774 # 8 - Stop Bits (One/Two)
16777 # 1 - Upper/Lower Shift
16778 # 2 - Typewriter Shift
16779 # 3 - Half Duplex / Full Duplex
16780 # 4 - Light/Dark Background
16781 # 5-6 - Carriage Return Without / With Line Feed
16782 # 7 - Extended Mode
16783 # 8 - Suppress Keyboard Display
16786 # 1 - End of line entry disabled/enabled
16787 # 2 - Conversational mode / (Local?) Mode
16788 # 3 - Control characters displayed / not displayed
16789 # 4 - (2-wire?) / 4-wire communications
16790 # 5 - RTS on and off for each character
16791 # 6 - (50Hz?) / 60 Hz
16792 # 7 - Exit after level zero diagnostics
16793 # 8 - RS-232 interface
16796 # 1 - Reverse Channel (yes / no)
16797 # 2 - Manual answer (no / yes)
16798 # 3-4 - Cursor appearance
16799 # 5 - Communication Rate
16800 # 6 - Enable / Disable EXT turnoff
16801 # 7 - Enable / Disable CR turnoff
16802 # 8 - Enable / Disable backspace
16804 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
16805 # reverse, blink, dim, and underline) the appropriate number of bits (by
16806 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
16807 # '@' is (effectively) "or"ed with each attribute to generate the proper third
16808 # character in the <ESC>0 sequence. The <sgr> string implements the following
16811 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
16812 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
16814 # Where: P1 <==> Standout attribute parameter
16815 # P2 <==> Underline attribute parameter
16816 # P3 <==> Reverse attribute parameter
16817 # P4 <==> Blink attribute parameter
16818 # P5 <==> Dim attribute parameter
16819 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
16820 ncr7900i|ncr7900|ncr 7900 model 1,
16822 cols#80, lines#24, xmc#1,
16823 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16824 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
16825 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
16826 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
16828 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
16829 sgr0=\E0@, smso=\E0Q, smul=\E0`,
16830 ncr7900iv|ncr 7900 model 4,
16833 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
16834 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
16835 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
16836 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
16837 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16838 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16839 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16840 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16841 # The user can enter a CTRL-B to get out of this locked state.
16842 # In <hpa>, we want to output the character given by the formula:
16843 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16844 ncr7901|ncr 7901 model,
16847 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16848 cub1=^H, cud1=^J, cuf1=^F,
16849 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16851 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16852 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16853 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16854 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16855 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16856 vpa=\013%p1%{64}%+%c,
16858 # Newbury Data Recording Limited (Newbury Data)
16860 # Have been manufacturing and reselling various peripherals for a long time
16861 # They don't make terminals anymore, but are still in business (in 2007).
16862 # Their e-mail address is at ndsales@newburydata.co.uk
16863 # and their post address is:
16865 # Newbury Data Recording Ltd,
16866 # Premier Park, Road One,
16867 # Winsford, Cheshire, CW7 3PT
16869 # Their technical support is still good, they sent me for free a printed copy
16870 # of the 9500 user manual and I got it just 1 week after I first contacted them
16874 # Manufactured in the early/mid eighties, behaves almost the same as a
16875 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16876 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16877 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16878 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16879 # recognized: if you type in "ESC !", the next (third) character is not
16880 # echoed, showing that the terminal was actually waiting for a parameter!
16881 ndr9500|nd9500|Newbury Data 9500,
16882 am, bw, hs, mc5i, mir, msgr, ul, xon,
16883 cols#80, lines#24, wsl#79,
16884 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16885 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16886 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16887 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16888 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16889 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16890 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16891 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16892 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16893 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16894 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16895 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16896 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16897 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16898 pfloc=\E|%{48}%p1%+%c2%p2\031,
16899 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16900 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16901 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16902 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16903 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16905 ndr9500-nl|NDR 9500 with no status line,
16908 dsl@, fsl@, tsl@, use=ndr9500,
16910 ndr9500-25|NDR 9500 with 25th line enabled,
16911 lines#25, use=ndr9500,
16913 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16914 lines#25, use=ndr9500-nl,
16916 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16919 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16920 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16921 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16923 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16924 lines#25, use=ndr9500-mc,
16926 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16929 dsl@, fsl@, tsl@, use=ndr9500-mc,
16931 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16932 lines#25, use=ndr9500-mc-nl,
16934 #### Perkin-Elmer (Owl)
16936 # These are official terminfo entries from within Perkin-Elmer.
16939 bantam|pe550|pe6100|perkin elmer 550,
16942 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16943 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16944 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16945 fox|pe1100|perkin elmer 1100,
16948 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16949 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16950 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16951 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16952 owl|pe1200|perkin elmer 1200,
16955 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16956 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16957 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16958 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16959 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16960 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16961 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16962 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16963 pe1251|pe6300|pe6312|perkin elmer 1251,
16965 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16966 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16967 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16968 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16969 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16970 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16971 # (pe7000m: this had
16972 # rmul=\E!\0, smul=\E!\040,
16973 # which is probably wrong, it collides with kf0
16974 pe7000m|perkin elmer 7000 series monochrome monitor,
16977 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16978 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16979 ed=\EJ, el=\EI, home=\EH, ind=^J,
16980 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16981 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16982 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16983 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16985 pe7000c|perkin elmer 7000 series colour monitor,
16986 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16987 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16991 # Sperry Univac has merged with Burroughs to form Unisys.
16994 # This entry is for the Sperry UTS30 terminal running the TTY
16995 # utility under control of CP/M Plus 1R1. The functionality
16996 # provided is comparable to the DEC vt100.
16997 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16998 uts30|sperry uts30 with cp/m@1R1,
17000 cols#80, lines#24, wsl#40,
17001 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17002 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
17003 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
17004 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17005 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17006 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
17007 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
17008 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
17009 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
17010 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
17011 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
17012 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
17013 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17014 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
17015 smul=\E[4m, tsl=\E], uc=\EPB,
17019 # Tandem builds these things for use with its line of fault-tolerant
17020 # transaction-processing computers. They aren't generally available
17021 # on the merchant market, and so are fairly uncommon.
17024 tandem6510|adm3a repackaged by Tandem,
17027 # A funny series of terminal that TANDEM uses. The actual model numbers
17028 # have a fourth digit after 653 that designates minor variants. These are
17029 # natively block-mode and rather ugly, but they have a character mode which
17030 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
17031 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
17032 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
17033 tandem653|t653x|Tandem 653x multipage terminal,
17034 OTbs, am, da, db, hs,
17035 cols#80, lines#24, wsl#64, xmc#1,
17036 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
17037 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
17038 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
17039 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
17041 #### Tandy/Radio Shack
17043 # Tandy has a line of VDTs distinct from its microcomputers.
17046 dmterm|deskmate terminal,
17049 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
17050 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17051 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
17052 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
17053 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
17054 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
17055 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
17056 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
17058 dt100|dt-100|Tandy DT-100 terminal,
17060 cols#80, lines#24, xmc#1,
17061 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17062 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17063 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17064 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
17065 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
17066 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
17067 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
17068 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
17069 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
17070 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
17071 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
17072 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17073 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
17074 cols#132, use=dt100,
17075 dt110|Tandy DT-110 emulating ansi,
17078 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17079 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17080 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17081 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
17082 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
17083 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
17084 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
17085 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
17086 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
17087 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
17088 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
17089 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17090 smacs=^N, smso=\E[7m, smul=\E[4m,
17091 pt210|TRS-80 PT-210 printing terminal,
17094 bel=^G, cr=^M, cud1=^J, ind=^J,
17096 #### Tektronix (tek)
17098 # Tektronix tubes are graphics terminals. Most of them use modified
17099 # oscilloscope technology incorporating a long-persistence green phosphor,
17100 # and support vector graphics on a main screen with an attached "dialogue
17101 # area" for interactive text.
17104 tek|tek4012|tektronix 4012,
17107 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
17108 ff=\014$<1000>, is2=\E^O,
17109 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17110 tek4013|tektronix 4013,
17111 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
17112 tek4014|tektronix 4014,
17114 is2=\E\017\E9, use=tek4012,
17115 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17116 tek4015|tektronix 4015,
17117 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
17118 tek4014-sm|tektronix 4014 in small font,
17119 cols#121, lines#58,
17120 is2=\E\017\E\:, use=tek4014,
17121 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17122 tek4015-sm|tektronix 4015 in small font,
17123 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
17124 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
17126 # You need to have "stty nl2" in effect. Some versions of tset(1) know
17127 # how to set it for you.
17129 # It's got the Magic Cookie problem around stand-out mode. If you can't
17130 # live with Magic Cookie, remove the :so: and :se: fields and do without
17131 # reverse video. If you like reverse video stand-out mode but don't want
17132 # it to flash, change the letter 'H' to 'P' in the :so: field.
17133 tek4023|tektronix 4023,
17135 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
17136 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
17137 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
17138 rmso=^_@, smso=^_P,
17139 # It is recommended that you run the 4025 at 4800 baud or less;
17140 # various bugs in the terminal appear at 9600. It wedges at the
17141 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
17142 # on keyboard don't work. You have to hit BREAK twice to get
17143 # one break at any speed - this is a documented feature.
17144 # Can't use cursor motion because it's memory relative, and
17145 # because it only works in the workspace, not the monitor.
17146 # Same for home. Likewise, standout only works in the workspace.
17148 # <el> was commented out since vi and rogue seem to work better
17149 # simulating it with lots of spaces!
17151 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
17152 # and didn't seem necessary.
17154 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
17156 cols#80, it#8, lines#34, lm#0,
17157 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
17158 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
17159 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
17160 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
17161 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
17162 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
17163 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
17165 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17166 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
17167 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
17168 tek4025-17|tek 4025 17 line window,
17169 lines#17, use=tek4025,
17170 tek4025-17-ws|tek 4025 17 line window in workspace,
17171 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
17172 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
17173 smso=\037att e\r, use=tek4025-17,
17174 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
17175 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
17176 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17178 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
17179 # The following status modes are assumed for normal operation (replace the
17180 # initial "!" by whatever the current command character is):
17181 # !COM 29 # NOTE: changes command character to GS (^])
17187 # ^]STO 9 17 25 33 41 49 57 65 73
17188 # Other modes may be set according to communication requirements.
17189 # If the command character is inadvertently changed, termcap can't restore it.
17190 # Insert-character cannot be made to work on both top and bottom rows.
17191 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
17192 # There also seems to be a problem with vertical motion, perhaps involving
17193 # delete/insert-line, following a typed carriage return. This terminal sucks.
17194 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17195 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
17196 # work any more. -- esr)
17197 tek4025a|Tektronix 4025A,
17198 OTbs, OTpt, am, bw, da, db, xon,
17199 cols#80, it#8, lines#34,
17200 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
17201 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
17202 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
17203 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
17204 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
17205 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
17206 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
17207 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
17209 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
17210 # Here's the command file that I use to get rogue to work on the 4025.
17211 # It should work with any program using the old curses (e.g. it better
17212 # not try to scroll, or cursor addressing won't work. Also, you can't
17214 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
17215 tek4025-cr|tek 4025 for curses and rogue,
17217 cols#80, it#8, lines#33,
17218 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
17219 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
17220 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17221 rmcup=\037wor 0, smcup=\037wor 33h,
17222 # next two lines commented out since curses only allows 128 chars, sigh.
17223 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
17224 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
17225 tek4025ex|4025ex|4027ex|tek 4025 w/!,
17226 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
17227 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17228 tek4105|tektronix 4105,
17229 OTbs, am, mir, msgr, ul, xenl, xt,
17230 cols#79, it#8, lines#29,
17231 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
17232 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
17233 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
17234 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
17235 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
17236 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
17237 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
17238 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
17239 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
17240 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17241 smul=\E[=5;<2m, tbc=\E[1g,
17243 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
17244 tek4105-30|4015 emulating 30 line vt100,
17245 am, mir, msgr, xenl, xon,
17246 cols#80, it#8, lines#30, vt#3,
17247 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17248 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17249 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17250 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17251 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17252 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17253 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
17254 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
17255 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17256 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17257 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17258 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17259 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
17260 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17261 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17264 # Tektronix 4105 from BRL
17265 # The following setup modes are assumed for normal operation:
17266 # CODE ansi CRLF no DABUFFER 141
17267 # DAENABLE yes DALINES 30 DAMODE replace
17268 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
17269 # FLAGGING input INSERTREPLACE replace LFCR no
17270 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
17271 # SELECTCHARSET G1 0 TABS -2
17272 # Other setup modes may be set for operator convenience or communication
17273 # requirements; I recommend
17274 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17275 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17276 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17277 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
17278 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17279 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
17281 # and factory color maps. After setting these modes, save them with NVSAVE. No
17282 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17283 # "IC" cannot be used in combination with "im" & "ei".
17284 # "tek4105a" is just a guess:
17285 tek4105a|Tektronix 4105,
17286 OTbs, OTpt, msgr, xon,
17287 OTkn#8, cols#80, it#8, lines#30, vt#3,
17288 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17289 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17290 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17291 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17292 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17293 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17294 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17295 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17296 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17297 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17298 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17299 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17300 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17301 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17302 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17303 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17304 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17305 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17308 # Tektronix 4106/4107/4109 from BRL
17309 # The following setup modes are assumed for normal operation:
17310 # CODE ansi COLUMNMODE 80 CRLF no
17311 # DABUFFER 141 DAENABLE yes DALINES 32
17312 # DAMODE replace DAVISIBILITY yes ECHO no
17313 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
17314 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
17315 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
17317 # Other setup modes may be set for operator convenience or communication
17318 # requirements; I recommend
17319 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17320 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17321 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17322 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
17323 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17324 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
17326 # and factory color maps. After setting these modes, save them with NVSAVE. No
17327 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17328 # "IC" cannot be used in combination with "im" & "ei".
17329 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
17331 cols#80, it#8, lines#32, vt#3,
17332 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17333 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17334 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17335 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17336 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17337 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17338 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17339 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17340 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17341 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17342 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17343 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17344 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17345 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17346 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17347 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17348 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17349 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
17351 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
17352 # 0 selects Tek mode, i.e., \E%!0
17353 # 1 selects ANSI mode
17354 # 2 selects ANSI edit-mode
17355 # 3 selects VT52 mode
17357 # One odd thing about the description (which has been unchanged since the 90s)
17358 # is that the cursor addressing is using VT52 mode, and a few others use the
17359 # VT52's non-CSI versions of ANSI, e.g., \EJ.
17360 tek4107|tek4109|tektronix terminals 4107 4109,
17361 OTbs, am, mir, msgr, ul, xenl, xt,
17362 cols#79, it#8, lines#29,
17363 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
17364 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
17365 cub1=^H, cud1=^J, cuf1=\EC,
17366 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
17367 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
17368 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17369 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
17370 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
17371 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
17372 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
17373 smul=\E%!1\E[4m$<2>\E%!0,
17374 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
17375 # see the note attached to tek4207.
17376 tek4207-s|Tektronix 4207 with sysline but no memory,
17378 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
17379 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17380 is2=\E7\E[?6l\E[2K\E[?6h\E8,
17381 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
17383 # The 4110 series may be a wonderful graphics series, but they make the 4025
17384 # look good for screen editing. In the dialog area, you can't move the cursor
17385 # off the bottom line. Out of the dialog area, ^K moves it up, but there
17386 # is no way to scroll.
17388 # Note that there is a floppy for free from Tek that makes the
17389 # 4112 emulate the vt52 (use the vt52 termcap). There is also
17390 # an expected enhancement that will use ANSI standard sequences.
17392 # 4112 in non-dialog area pretending to scroll. It really wraps
17393 # but vi is said to work (more or less) in this mode.
17395 # 'vi' works reasonably well with this entry.
17397 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
17400 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
17401 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
17402 # The 4112 with the ANSI compatibility enhancement
17403 tek4112|tek4114|tektronix 4110 series,
17406 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
17407 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
17408 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
17409 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
17410 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17411 tek4112-nd|4112 not in dialog area,
17413 cuu1=^K, use=tek4112,
17414 tek4112-5|4112 in 5 line dialog area,
17415 lines#5, use=tek4112,
17416 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
17417 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
17418 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
17419 # previously \0410 and \0411 sequences...I don't *think* they were supposed
17420 # to be 4-digit octal -- esr)
17421 tek4113|tektronix 4113 color graphics with 5 line dialog area,
17424 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
17425 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17426 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
17427 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
17429 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
17430 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
17431 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
17432 # :vb: needs enough delay to let you see the background color being toggled.
17433 tek4113-nd|tektronix 4113 color graphics with no dialog area,
17435 cols#80, it#8, lines#34,
17436 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
17438 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17439 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
17440 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
17441 # This entry is from Tek. Inc. (Brian Biehl)
17442 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
17443 otek4115|Tektronix 4115,
17444 OTbs, am, da, db, eo,
17445 cols#80, it#8, lines#34,
17446 cbt=\E[Z, clear=\E[H\E[2J,
17447 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
17448 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17449 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
17450 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
17452 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
17453 kbs=^H, ri=\EM, rmam=\E[?7l,
17454 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
17455 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
17456 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
17458 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
17461 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
17462 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17463 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17464 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17465 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
17466 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
17467 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
17468 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
17469 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
17470 rmso=\E[m, rmul=\E[m,
17471 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
17472 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17473 vpa=\E[%p1%{1}%+%dd,
17474 # The tek4125 emulates a vt100 incorrectly - the scrolling region
17475 # command is ignored. The following entry replaces <csr> with the needed
17476 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
17477 # chokes on; and adds a lot of initialization for the tek dialog area.
17478 # Note that this entry uses all 34 lines and sets the cursor color to green.
17479 # Steve Jacobson 8/85
17480 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
17481 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
17482 tek4125|tektronix 4125,
17484 csr@, dl1=\E[1M, il1=\E[1L,
17485 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17486 rc@, sc@, smkx=\E=, use=vt100,
17488 # From: <jcoker@ucbic>
17489 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
17490 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
17491 # note that if jcoker wasn't confused you may be able to use this one.
17492 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
17493 tek4207|Tektronix 4207 graphics terminal with memory,
17494 am, bw, mir, msgr, ul, xenl,
17495 cols#80, it#8, lines#32,
17496 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
17497 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17498 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
17499 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
17500 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
17501 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17502 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
17503 rev=\E[7m, ri=\E[T,
17504 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
17505 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
17506 smul=\E[4m, tbc=\E[1g,
17508 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
17509 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
17510 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
17511 tek4404|tektronix 4404,
17513 cols#80, it#8, lines#32,
17514 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
17515 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
17516 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
17517 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
17518 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
17519 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
17520 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17521 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
17522 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
17523 # Some unknown person wrote:
17524 # I added the is string - straight Unix has ESC ; in the login
17525 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
17526 # mode). The is string here cleans up a few things (but not
17528 ct8500|tektronix ct8500,
17531 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
17532 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
17533 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
17534 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
17535 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
17537 # Tektronix 4205 terminal.
17539 # am is not defined because the wrap around occurs not when the char.
17540 # is placed in the 80'th column, but when we are attempting to type
17541 # the 81'st character on the line. (esr: hmm, this is like the vt100
17542 # version of xenl, perhaps am + xenl would work!)
17544 # Bold, dim, and standout are simulated by colors and thus not allowed
17545 # with colors. The tektronix color table is mapped into the RGB color
17546 # table by setf/setb. All colors are reset to factory specifications by oc.
17547 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
17548 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
17549 # interval then maps into pre-defined value.
17550 tek4205|tektronix 4205,
17552 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
17553 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17554 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
17555 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
17556 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17557 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17558 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
17559 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
17560 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
17562 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
17563 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
17564 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
17565 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
17567 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
17568 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
17569 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
17570 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17571 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17572 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
17573 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17574 smul=\E[4m, tbc=\E[1g,
17576 #### Teletype (tty)
17578 # These are the hardcopy Teletypes from before AT&T bought the company,
17579 # clattering electromechanical dinosaurs in Bakelite cases that printed on
17580 # pulpy yellow roll paper. If you remember these you go back a ways.
17581 # Teletype-branded VDTs are listed in the AT&T section.
17583 # The earliest UNIXes were designed to use these clunkers; nroff and a few
17584 # other programs still default to emitting codes for the Model 37.
17587 tty33|tty35|model 33 or 35 teletype,
17590 bel=^G, cr=^M, cud1=^J, ind=^J,
17591 tty37|model 37 teletype,
17593 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
17596 # There are known to be at least three flavors of the tty40, all seem more
17597 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
17598 # awful braindamage, such as printing a visible newline indicator after each
17599 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
17600 # braindamaged but has hope and is described here. The 40-4 is a 3270
17601 # lookalike and beyond hope. The terminal has visible bell but I don't know
17602 # it - it's null here to prevent it from showing the BL character.
17603 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
17604 # a "newline" style terminal (-crmode) vi figures all it needs is nl
17605 # to get crlf, even if <cr> is not ^M.)
17606 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
17607 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
17610 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
17611 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
17612 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
17613 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
17614 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
17615 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
17616 tty43|model 43 teletype,
17617 OTbs, am, hc, os, xon,
17619 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
17624 # You can add <is2=\E<> to put this 40-column mode, though I can't
17625 # for the life of me think why anyone would want to.
17626 scanset|sc410|sc415|Tymshare Scan Set,
17629 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
17630 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17631 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
17632 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
17633 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
17635 #### Volker-Craig (vc)
17637 # If you saw a Byte Magazine cover with a terminal on it during the early
17638 # 1980s, it was probably one of these. Carl Helmers liked them because
17639 # they could crank 19.2 and were cheap (that is, he liked them until he tried
17640 # to program one...)
17643 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
17644 # every other linefeed.
17645 vc303|vc103|vc203|volker-craig 303,
17648 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17649 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
17650 kcuu1=^N, ll=\017$<1>W,
17651 vc303a|vc403a|volker-craig 303a,
17652 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
17653 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
17654 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
17655 vc404|volker-craig 404,
17658 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
17659 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
17660 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
17661 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
17662 vc404-s|volker-craig 404 w/standout mode,
17663 cud1=^J, rmso=^O, smso=^N, use=vc404,
17664 # From: <wolfgang@cs.sfu.ca>
17665 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
17666 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
17669 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
17670 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
17671 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
17672 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
17673 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
17674 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
17675 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
17676 rmso=\E^_, smso=\E^Y,
17677 vc415|volker-craig 415,
17678 clear=^L, use=vc404,
17680 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
17683 #### IBM PC and clones
17686 # The pcplot IBM-PC terminal emulation program is really messed up. It is
17687 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
17688 # doesn't support scrolling regions, ignores add line commands, and ignores
17689 # delete line commands. Consequently, the resulting behavior looks like a
17690 # crude adm3a-type terminal.
17691 # Steve Jacobson 8/85
17692 pcplot|pc-plot terminal emulation program,
17694 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
17695 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
17696 # I've found that my KayPro II, running MDM730, continues to emulate an
17697 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
17698 # system the following termcap entry works well:
17699 # I have noticed a couple of minor glitches, but nothing I can't work
17700 # around. (I added two capabilities from the BRL entry -- esr)
17701 kaypro|kaypro2|kaypro II,
17704 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
17705 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
17706 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
17708 # From IBM, Thu May 5 19:35:27 1983
17709 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
17710 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
17713 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
17714 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
17716 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
17717 OTbs, am, bw, eo, hs, km, msgr, ul,
17718 cols#80, it#8, lines#24,
17719 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
17720 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
17721 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17722 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17723 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
17724 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
17725 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
17726 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17727 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
17728 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
17729 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
17730 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
17731 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
17732 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
17733 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17737 # Apple II firmware console first, then various 80-column cards and
17738 # terminal emulators. For two cents I'd toss all these in the UFO file
17739 # along with the 40-column apple entries.
17742 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
17743 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
17744 # function of TIC, not the firmware.
17745 # The clear key on a IIgs will do something like clear-screen,
17746 # depending on what you're in.
17747 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
17748 OTbs, am, bw, eo, msgr,
17749 cols#80, it#8, lines#24,
17750 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
17751 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17752 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
17753 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
17755 # Apple //e with 80-column card, entry from BRL
17756 # The modem interface is permitted to discard LF (maybe DC1), otherwise
17757 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
17758 # Auto-wrap does not work right due to newline scrolling delay, which also
17759 # requires that you set "stty cr2".
17760 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
17761 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
17762 # using a terminal emulation program instead of the built-in firmware.
17766 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
17767 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
17768 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
17769 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
17771 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
17772 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
17773 apple2e-p|Apple //e via Pascal,
17774 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
17775 kcud1=^J, use=apple2e,
17776 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
17777 # Enable DC3/DC1 flow control with "stty ixon -ixany".
17778 apple-ae|ASCII Express,
17779 OTbs, am, bw, msgr, nxon, xon,
17780 cols#80, it#8, lines#24,
17781 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
17782 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17783 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
17784 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
17786 appleII|apple ii plus,
17788 cols#80, it#8, lines#24,
17789 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
17790 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
17791 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
17792 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
17794 # Originally by Gary Ford 21NOV83
17795 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
17796 apple-80|apple II with smarterm 80 col,
17799 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
17800 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
17801 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
17802 apple-soroc|apple emulating soroc 120,
17805 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17806 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
17807 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17808 # From Peter Harrison, Computer Graphics Lab, San Francisco
17809 # ucbvax!ucsfmis!harrison .....uucp
17810 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
17811 # "These two work. If you don't have the inverse video chip for the
17812 # Apple with videx then remove the :so: and :se: fields."
17813 # (apple-videx: this used to be called DaleApple -- esr)
17814 apple-videx|Apple with videx videoterm 80 column board with inverse video,
17816 cols#80, it#8, lines#24,
17817 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
17818 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17819 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
17820 rmso=^Z2, sgr0=^Z2, smso=^Z3,
17821 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
17822 # Apple Cat ][ 212 modem, + more all
17823 # controlled by ASCII Express: Pro.
17824 # From Dave Shaver <isucs1!shaver>
17825 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
17828 acsc=, clear=^L, cuf1=^\,
17829 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17830 flash=^W35^W06, home=^Y,
17831 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
17833 apple-uterm|Ultraterm for Apple micros,
17836 acsc=, clear=^L, cuf1=^\,
17837 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17838 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17839 # from trwrba!bwong (Bradley W. Wong):
17841 # This entry assumes that you are using an apple with the UCSD Pascal
17842 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17843 # supplied with the standard apple except that screenwidth should be set
17844 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17845 # this termcap entry. This is because that key, on the Apple, transmits
17846 # a ^U and would thus preempt the more useful "up" function of vi.
17849 apple80p|80-column apple with Pascal card,
17852 clear=^Y^L, cuf1=^\\:,
17853 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17856 # Apple II+ equipped with Videx 80 column card
17858 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17859 # manually converted by D A Gwyn
17861 # DO NOT use any terminal emulation with this data base, it works directly
17862 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17864 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17865 # 1 screen, while in R2 ^U doesn't.
17866 # For inverse alternate character set add:
17867 # <smacs>=^O:<rmacs>=^N:
17868 # (apple-v: added it#8 -- esr)
17869 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17871 cols#80, it#8, lines#24,
17872 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17873 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17874 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17875 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17876 khome=^Y, rmso=^Z2, smso=^Z3,
17877 apple-videx3|vapple|Apple II with 80 col card,
17880 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17881 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17882 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17883 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17884 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17885 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17886 aepro|Apple II+ running ASCII Express Pro--vt52,
17889 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17890 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17892 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17893 apple-vm80|ap-vm80|apple with viewmax-80,
17896 clear=\014$<300/>, cuf1=^\\:,
17897 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17898 ed=\013$<300/>, el=^], home=\031$<200/>,
17900 #### Apple Lisa & Macintosh
17903 # (lisa: changed <cvvis> to <cnorm> -- esr)
17904 lisa|apple lisa console display (black on white),
17905 OTbs, am, eo, msgr,
17906 cols#88, it#8, lines#32,
17907 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17908 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17909 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17910 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17911 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17912 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17913 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17914 liswb|apple lisa console display (white on black),
17915 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17916 smso=\E[m, smul=\E[4m, use=lisa,
17918 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17919 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17921 # These entries assume that the 'Auto Wraparound' is enabled.
17922 # Xon-Xoff flow control should also be enabled.
17924 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17925 # settings are in non-volatile memory and don't need to be reset upon login.
17926 # Also setting the number of columns glitches the screen annoyingly.
17927 # You can type "reset" to get them set.
17929 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17930 OTbs, OTpt, am, xenl, xon,
17931 OTkn#4, cols#80, it#8, lines#24, vt#3,
17932 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17933 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17934 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17935 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17936 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17937 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17938 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17939 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17940 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17941 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17943 # Lisaterm in 132 column ("wide") mode.
17944 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17946 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17947 # Although MacTerminal has insert/delete line, it is commented out here
17948 # since it is much faster and cleaner to use the "lock scrolling region"
17949 # method of inserting and deleting lines due to the MacTerminal implementation.
17950 # Also, the "Insert/delete ch" strings have an extra character appended to them
17951 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17952 # supported by MacTerminal.
17953 mac|macintosh|Macintosh with MacTerminal,
17956 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17957 # Lisaterm in 132 column ("wide") mode.
17958 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17961 #### Radio Shack/Tandy
17964 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17965 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17966 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17967 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17969 cols#80, it#8, lines#24,
17970 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17971 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17972 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17973 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17974 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17975 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17976 # (trs2: removed obsolete ":nl=^_:" -- esr)
17977 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17979 cols#80, it#8, lines#24,
17980 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17981 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17982 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17983 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17984 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17985 # (This had extension capabilities
17986 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17987 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17988 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17989 trs16|trs-80 model 16 console,
17991 cols#80, it#8, lines#24,
17992 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17993 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17994 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17995 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17996 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17997 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17998 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17999 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
18000 smacs=\ERG, smso=\ERD,
18002 #### Commodore Business Machines
18004 # Formerly located in West Chester, PA; went spectacularly bust in 1994
18005 # after years of shaky engineering and egregious mismanagement. Made one
18006 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
18007 # C-128, VIC-20). The C-64 is said to have been the most popular machine
18008 # ever (most units sold); they can still be found gathering dust in closets
18012 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
18013 # Added a few more entries, converted caret-type control sequence (^x) entries
18014 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
18015 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
18017 # :as:, :ae: Support for alternate character sets.
18018 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
18019 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
18020 # This one appears to fix a problem I always had with a line ending
18021 # at 'width+1' (I think) followed by a blank line in vi. The blank
18022 # line tended to disappear and reappear depending on how the screen
18023 # was refreshed. Note that this is probably needed only if you use
18024 # something like a Dnet Fterm with the window sized to some peculiar
18025 # dimension larger than 80 columns.
18026 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
18027 # (amiga: removed obsolete :kn#10:,
18028 # also added empty <acsc> to suppress a warning --esr)
18030 OTbs, am, bw, xenl,
18032 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
18033 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
18034 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
18035 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
18036 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18037 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
18038 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
18039 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
18040 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
18041 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
18042 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
18043 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
18044 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18046 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
18047 # (amiga: added empty <acsc> to suppress a warning.
18048 # I'm told this entry screws up badly with AS225, the Amiga
18049 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
18050 amiga-h|Hans Verkuil's Amiga ANSI,
18053 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
18054 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
18055 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
18056 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
18057 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
18058 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
18059 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
18060 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
18061 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18062 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
18063 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
18064 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
18065 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
18066 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
18067 smso=\2337m, smul=\2334m,
18069 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
18071 # Pavel Fedin added
18076 amiga-8bit|Amiga ANSI using 8-bit controls,
18077 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18078 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
18079 kpp=\233T, ri=\215, rin@, use=amiga-h,
18081 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
18082 # requires use of appropriate preferences settings.
18083 amiga-vnc|Amiga using VNC console (black on light gray),
18084 am, da, db, msgr, ndscr,
18085 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
18086 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
18087 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
18088 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18089 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18090 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18091 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18092 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
18093 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
18094 indn=\E[%p1%dS, invis=\E8m,
18095 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18096 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18097 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
18098 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
18099 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
18100 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
18101 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
18102 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
18103 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18104 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
18105 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
18106 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
18107 smso=\E[1m, smul=\E[4m,
18109 # MorphOS on Genesi Pegasos
18110 # By Pavel Fedin <sonic_amiga@rambler.ru>
18112 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18113 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
18114 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
18115 ri=\215, rin@, use=amiga-h,
18117 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
18118 # I'm trying to write a termcap for a commodore b-128, and I'm
18119 # having a little trouble. I've had to map most of my control characters
18120 # to something that unix will accept (my delete-char is a ctrl-t, etc),
18121 # and create some functions (like cm), but thats life.
18122 # The problem is with the arrow keys - right, and up work fine, but
18123 # left deletes the previous character and down I just can't figure out.
18124 # Jove knows what I want, but I don't know what it's sending to me (it
18125 # isn't thats bound to next-line in jove).
18126 # Anybody got any ideas? Here's my termcap.
18127 # DAG -- I changed his "^n" entries to "\n"; see if that works.
18129 commodore|b-128|Commodore B-128 micro,
18131 OTdN#20, cols#80, lines#24, pb#150,
18132 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
18133 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
18134 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
18135 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
18136 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
18141 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
18142 northstar|North Star Advantage,
18146 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
18147 el=\016$<200/>, home=\034\032$<200/>,
18151 # Thu Jul 7 03:55:16 1983
18153 # As an aside, be careful; it may sound like an anomaly on the
18154 # Osborne, but with the 80-column upgrade, it's too easy to
18155 # enter lines >80 columns!
18157 # I've already had several comments...
18158 # The Osborne-1 with the 80-col option is capable of being
18159 # 52, 80, or 104 characters wide; default to 80 for compatibility
18160 # with most systems.
18162 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18163 osborne-w|osborne1-w|osborne I in 104-column mode,
18165 cols#104, lines#24,
18166 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18167 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18168 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18169 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18170 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18171 osborne|osborne1|osborne I in 80-column mode,
18172 OTbs, am, mir, msgr, ul, xhp,
18173 OTdB#4, cols#80, lines#24,
18174 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18175 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18176 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18177 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18178 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18180 # Osborne Executive definition from BRL
18181 # Similar to tvi920
18182 # Added by David Milligan and Tom Smith (SMU)
18183 osexec|Osborne executive,
18185 OTug#1, cols#80, lines#24, xmc#1,
18186 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18187 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18188 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18189 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18190 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18191 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18192 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18195 #### Console types for obsolete UNIX clones
18197 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18198 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18199 # were commercial, Minix an educational tool sold in conjunction with a book.
18200 # Memory-segmentation limits and a strong tendency to look like V7 long after
18201 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18202 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18203 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18204 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18205 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18206 # even as single processes under SunOS and the Macintosh OS.
18210 # http://www.minix3.org/manpages/html4/console.html
18211 minix|minix console (v3),
18212 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18213 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18214 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18215 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18216 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18217 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18218 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18219 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18220 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18221 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18222 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18223 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18224 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18225 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18228 minix-3.0|minix console (v3.0),
18229 use=ecma+color, use=minix-1.7,
18232 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18233 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18234 minix-1.7|minix console (v1.7),
18236 cols#80, it#8, lines#25,
18237 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18238 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18239 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18240 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18241 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18242 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18243 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18244 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18245 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18246 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18247 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18248 smso=\E[7m, smul=\E[4m,
18249 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18250 minix-old|minix-1.5|minix console (v1.5),
18252 cols#80, it#8, lines#25,
18253 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18254 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18255 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18256 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18257 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18258 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18259 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18260 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18261 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18262 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18263 # The linewrap option can be specified by editing /usr/include/minix/config.h
18264 # before recompiling the minix 1.5 kernel.
18265 minix-old-am|minix console with linewrap,
18268 pc-minix|minix console on an Intel box,
18269 use=klone+acs, use=minix-3.0,
18271 # According to the Coherent 2.3 manual, the PC console is similar
18272 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18273 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18274 # has blinking and bold.
18275 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18277 cols#80, it#8, lines#25,
18278 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18279 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18280 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18281 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18282 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18284 # According to the Venix 1.1 manual, the PC console is similar
18285 # to a DEC vt52. Differences seem to be (1) arrow keys send
18286 # different strings, (2) enhanced standout, (3) added insert/delete line.
18287 # Note in particular that it doesn't have automatic margins.
18288 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18289 # not described here because this derives from an old termcap entry.
18290 pc-venix|venix|IBM PC console running Venix,
18291 cols#80, it#8, lines#25,
18292 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18293 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18294 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18295 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18297 #### Miscellaneous microcomputer consoles
18299 # If you know anything more about any of these, please tell me.
18302 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18303 # It may be used as a terminal by putting it in "line" mode as seen on
18304 # one of the status lines.
18305 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18306 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18307 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18308 # used \ED instead.
18309 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18310 mai|basic4|MAI Basic Four in ansi mode,
18311 am, da, db, mir, msgr,
18312 cols#82, it#8, lines#25,
18313 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18314 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18315 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18316 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18317 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18318 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18319 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18320 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18321 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18322 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18323 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18324 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18325 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18327 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18328 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18329 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18330 # about 1,5 km from where I live, but doesn't build own computers any
18331 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18332 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18333 # video output for a TV set or a dedicated monitor and several slots for
18334 # Apple II cards. Basis 108 were quite popular at german schools before
18335 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18336 # development system (which I used even in 1993 to program the steering
18337 # and data recording for our school's experimental solar panel :), Apple DOS
18339 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18340 basis|BASIS108 computer with terminal translation table active,
18341 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18342 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18343 smso=\E(, use=adm3a,
18344 # luna's BMC terminal emulator
18345 luna|luna68k|LUNA68K Bitmap console,
18346 cols#88, lines#46, use=ansi-mini,
18347 megatek|pegasus workstation terminal emulator,
18350 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18351 # interface (pre-Macintosh by several years) that went nowhere.
18352 xerox820|x820|Xerox 820,
18355 bel=^G, clear=\032$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18356 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18359 #### Videotex and teletext
18362 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18363 # \E[?3l 80 columns
18364 # \E[?4l scrolling on
18365 # \E[12h local echo off
18366 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18367 # \E)0 G1 DEC set (line graphics)
18369 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18370 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18371 OTbs, eslok, hs, xenl,
18372 cols#80, it#8, lines#24, wsl#72, xmc#0,
18373 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18374 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18375 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18376 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18377 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18378 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18379 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18380 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18381 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18382 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18383 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18384 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18385 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18386 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18387 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18388 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18389 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18390 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18391 u6=\E[%i%d;%dR, u7=\E[6n,
18393 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18395 minitel1|minitel 1,
18396 am, bw, eslok, hs, hz, msgr,
18397 colors#8, cols#40, lines#24, pairs#8,
18398 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18399 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18400 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18401 enacs=^Y, fsl=^J, home=^^, ind=^J,
18402 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18403 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18404 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18405 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18406 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18407 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18408 minitel1b|minitel 1-bistandard (in 40cols mode),
18410 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18411 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18412 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18413 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18414 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18415 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18416 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18417 # <rmkx> posait des problemes (logout en sortant de vi).
18418 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18420 colors@, cols#80, it#8, pairs@,
18421 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18422 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18423 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18424 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18425 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18426 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18427 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18428 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18429 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18431 ######## OBSOLETE VDT TYPES
18433 # These terminals are *long* dead -- these entries are retained for
18434 # historical interest only.
18436 #### Amtek Business Machines
18439 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18440 # but these caps were commented out in 8.3; also, removed overridden
18441 # ":do=^J:" -- esr)
18442 abm80|amtek business machines 80,
18445 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18446 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18447 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18449 #### Bell Labs blit terminals
18451 # These were AT&T's official entries. The 5620 FAQ maintained by
18452 # David Breneman <daveb@dgtl.com> has this to say:
18454 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18455 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18456 # was good. But lo, upon the horizon loomed a mighty management-type person
18457 # (known now only by the initials VP) who said, the mighty Jerq must stay
18458 # alone, and could not go forth into the world. So Locanthi and Pike put the
18459 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18460 # world. And the Jerq lived the rest of its days in research, but never
18461 # strayed from those paths.
18463 # In all seriousness, the Blit was originally known as the Jerq, but when
18464 # it started to be shown outside of the halls of the Bell Labs Research
18465 # organization, the management powers that be decided that the name could
18466 # not remain. So it was renamed to be Blit. This was in late 1981.
18468 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18472 blit|jerq|blit running teletype rom,
18474 cols#87, it#8, lines#72,
18475 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18476 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18477 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18478 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18479 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18480 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18482 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18483 cbblit|fixterm|blit running columbus code,
18485 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18486 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18487 smul=\EU", use=blit,
18489 oblit|ojerq|first version of blit rom,
18490 am, da, db, eo, mir, ul, xon,
18491 cols#88, it#8, lines#72,
18492 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18493 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18494 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18495 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18498 #### Bolt, Beranek & Newman (bbn)
18500 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18501 # The parent company, best known as the architects of the Internet, is
18504 # Jeff DelPapa <dp@world.std.com> writes:
18505 # The bitgraph was a large white box that contained a monochrome bitmap
18506 # display, and a 68000 to run it. You could download code and run it on
18507 # the cpu, it had 128kb (I think) of memory. I used one in the late
18508 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18509 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18510 # rate, and looked like a rubber sheet stretching, then snapping
18511 # upwards. It had everything the early mac had, except a floppy drive a
18512 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18513 # Beranek and Neuman) sold at most a few hundred of them to the real
18514 # world. DOD may have bought more...
18517 # Entries for the BitGraph terminals. The problem
18518 # with scrolling in vi can only be fixed by getting BBN to put
18519 # smarter scroll logic in the terminal or changing vi or padding
18520 # scrolls with about 500 ms delay.
18522 # I always thought the problem was related to the terminal
18523 # counting newlines in its input buffer before scrolling and
18524 # then moving the screen that much. Then vi comes along and
18525 # paints lines in on the bottom line of the screen, so you get
18526 # this big white gap.
18528 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18529 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18531 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18532 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18534 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18537 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18538 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18539 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18540 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18541 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18542 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18543 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18544 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18546 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18547 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18549 bg1.25nv|bbn bitgraph 1.25 (normal video),
18550 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18552 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18553 bg1.25|bbn bitgraph 1.25,
18555 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18556 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18557 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18558 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18559 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18560 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18561 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18564 #### Bull (bq, dku, vip)
18566 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18568 #============================================#
18569 # BULL QUESTAR 210 `SDP' terminals emulation #
18570 #============================================#
18572 # Description written by R.K.Saunders (Bull Transac)
18574 # Modifications written by F. Girard (Bull MTS)
18575 # 19-05-87 V02.00.01
18576 # 17-12-87 V02.00.02
18577 # 15-09-89 V02.00.05
18579 # Typical technical selections F1 (modes SDP/ROLL):
18580 # -------------------------------------------------------
18581 # | 01 02 03 04 05 06 07 08 09 10 |
18582 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18584 # | 11 12 13 14 15 16 17 18 19 20 |
18585 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18587 # | 21 22 23 24 25 26 27 28 29 30 |
18588 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18590 # | 31 32 33 34 35 36 37 38 39 40 |
18591 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18592 # -------------------------------------------------------
18593 # Typical firmware identification F5 "etat 6":
18594 # P287.02.04b (AZERTY)
18595 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18596 # P298.03.03 (monochrome) or P374.03.02 (colour)
18598 # SM SDP mode (VIP command): ^[[?=h
18599 # RIS (erases screen): ^[c
18600 # DMI disable keyboard: ^[`
18601 # SM double rendition mode: ^[[?>h
18602 # RM solicited status mode: ^[[5l
18603 # RM character mode: ^[[>l
18604 # RM echoplex mode: ^[[12l
18605 # RM column tab mode: ^[[18l
18606 # RM forbid SS2 keyboard mode: ^[[?<l
18607 # SM scroll mode: ^[[=h
18608 # FCF enable XON/XOFF: ^[P1s^[\
18609 # MTL select end msg character: ^[[^Wp
18610 # EMI enable keyboard: ^[b
18611 # RIS retour etat initial: ^[c
18612 # enable FC keypad: ^[[?<h,
18613 # MPW map status line window: ^[PY99:98^[\
18614 # SCP select status line: ^[[0;98v
18615 # ED erase entire partition: ^[[2J
18616 # SCP select main partition: ^[[v
18617 # SM character insertion mode: ^[[4h
18618 # RM character replacement mode: ^[[4l
18619 # COO cursor on: ^[[r
18620 # COO cursor off: ^[[1r
18621 # SGR dim (turquoise) rev attr: ^[[2;7m
18622 # SGR Data normal attr: ^[[m
18623 # SO Line-graphic mode ON: ^N
18624 # SI Line-graphic mode OFF: ^O
18625 # MC start routing to printer: ^[[5i
18626 # MC stop routing to printer: ^M^[[4i
18629 # This entry covers the following terminals:
18630 # dku7102, tws2102, and tws models 2105 to 2112
18631 tws-generic|dku7102|Bull Questar tws terminals,
18632 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18633 cols#80, it#8, lines#24, wsl#80,
18634 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18635 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18636 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18637 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18638 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18639 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18640 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18641 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18642 il1=\E[L, ind=^J, invis=\E[0;8m,
18643 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18644 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18645 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18646 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18647 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18648 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18649 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18650 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18651 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18652 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18653 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18654 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18655 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18656 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18657 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18658 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18659 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18661 tws2103|xdku|BULL Questar tws2103,
18662 ht=^I, use=tws-generic,
18663 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18664 ht=^I, use=tws2102-sna,
18665 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18666 clear=\E[2J\E[H, cup@, dl@, dl1@,
18667 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18668 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18670 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18671 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18672 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18673 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18675 #=========================================================#
18676 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18677 #=========================================================#
18679 # Description written by J. Staerck (BULL SA)
18680 # Copyright (c) 1989 BULL SA
18681 #---------------------------------------------------------------------------
18682 # This entry is used for terminals with vt320 emulation mode
18683 # and following set-up :
18684 # 8 bit ISO Latin Character Set (ISO 8859-1),
18685 # 7 bit Control Characters,
18686 # 80 columns screen.
18687 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18688 # They are used in string capabilities with vt220-320 emulation mode.
18689 # In the following DEC definitions, two kinds of terminfo databases are
18691 # 1. the first with Command Sequence Introducer starting with escape
18692 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18693 # 2. the second with Command Sequence Introducer starting with escape
18694 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18695 # Soft Terminal Reset esc [ ! p
18696 # RIS (erases screen): esc c
18697 # DECKPNM numeric keypad mode: esc >
18698 # DECKPAM applic. keypad mode: esc =
18699 # DECSTBM Scrolling region: esc [ r
18700 # SCS select G0 = US: esc ( B
18701 # SCS select G1 = line-graphic: esc ) 0
18702 # Select 7-bit C1 controls: esc sp F
18703 # Select 8-bit C1 controls: esc sp G
18704 # Select cursor home: esc [ H
18705 # Select erase screen: esc [ J
18706 # SM KAM lock keyboard: esc [ 2 h
18707 # RM KAM unlock keyboard: esc [ 2 l
18708 # SM SRM local echo off: esc [ 1 2 h
18709 # RM SRM local echo on: esc [ 1 2 l
18710 # SM LNM New line : esc [ 2 0 h
18711 # RM LNM return = CR only: esc [ 2 0 l
18712 # SM DECCKM cursor keys mode: esc [ ? 1 h
18713 # RM DECCKM appli. keys mode: esc [ ? 1 l
18714 # SM DECANM ANSI mode on: esc [ ? 2 h
18715 # RM DECANM ANSI mode off: esc [ ? 2 l
18716 # SM DECCOLM 132-column screen: esc [ ? 3 h
18717 # RM DECCOLM 80-column screen: esc [ ? 3 l
18718 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18719 # RM DECSCLM Jump scroll: esc [ ? 4 l
18720 # SM DECSCNM screen light backgr. esc [ ? 5 h
18721 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18722 # SM DECOM move within margins: esc [ ? 6 h
18723 # RM DECOM move outside margins: esc [ ? 6 l
18724 # SM DECAWM auto right margin: esc [ ? 7 h
18725 # RM DECAWM auto right margin: esc [ ? 7 l
18726 # SM DECARM auto repeat: esc [ ? 8 h
18727 # RM DECARM auto repeat: esc [ ? 8 l
18728 # DECSASD Select active main: esc [ 0 $ }
18729 # DECSASD Select active status: esc [ 1 $ }
18730 # DECSSDT Select status none: esc [ 0 $ ~
18731 # DECSSDT Select status indic.: esc [ 1 $ ~
18732 # DECSSDT Select status host-wr: esc [ 2 $ ~
18733 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18734 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18735 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18736 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18737 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18738 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18739 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18740 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18741 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18742 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18743 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18744 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18745 # Char. and Line attributes: esc [ Ps ... Ps m
18746 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18747 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18750 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18751 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18752 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
18753 cols#80, it#8, lines#24, vt#3, wsl#80,
18754 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18755 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18756 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18757 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18758 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18759 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18760 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18761 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18762 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18763 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18764 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18765 is1=\E[63;1"p\E[2h,
18766 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18767 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18768 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18769 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18770 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18771 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18772 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18773 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18774 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18775 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18776 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
18777 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18778 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
18780 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18781 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18782 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18783 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
18784 bq300-rv|Bull vt320 reverse 80 columns,
18785 flash=\E[?5l$<50>\E[?5h,
18786 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18788 bq300-w|Bull vt320 132 columns,
18790 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18791 rs2=\E[?3h, use=bq300,
18792 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18794 flash=\E[?5l$<50>\E[?5h,
18795 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18796 rs2=\E[?3h, use=bq300,
18798 # This entry is used for terminals with vt320 emulation mode
18799 # and following set-up :
18800 # 8 bit ISO Latin Character Set (ISO 8859-1),
18801 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18802 # 80 columns screen.
18803 # Soft Terminal Reset csi ! p
18804 # RIS (erases screen): esc c
18805 # DECKPNM numeric keypad mode: esc >
18806 # DECKPAM applic. keypad mode: esc =
18807 # DECSTBM Scrolling region: esc [ r
18808 # SCS select G0 = US: esc ( B
18809 # SCS select G1 = line-graphic: esc ) 0
18810 # Select 7-bit C1 controls: esc sp F
18811 # Select 8-bit C1 controls: esc sp G
18812 # Select cursor home: csi H
18813 # Select erase screen: csi J
18814 # SM KAM lock keyboard: csi 2 h
18815 # RM KAM unlock keyboard: csi 2 l
18816 # SM SRM local echo off: csi 1 2 h
18817 # RM SRM local echo on: csi 1 2 l
18818 # SM LNM New line : csi 2 0 h
18819 # RM LNM return = CR only: csi 2 0 l
18820 # SM DECCKM cursor keys mode: csi ? 1 h
18821 # RM DECCKM appli. keys mode: csi ? 1 l
18822 # SM DECANM ANSI mode on: csi ? 2 h
18823 # RM DECANM ANSI mode off: csi ? 2 l
18824 # SM DECCOLM 132-column screen: csi ? 3 h
18825 # RM DECCOLM 80-column screen: csi ? 3 l
18826 # SM DECSCLM Smooth scroll: csi ? 4 h
18827 # RM DECSCLM Jump scroll: csi ? 4 l
18828 # SM DECSCNM screen light backgr. csi ? 5 h
18829 # RM DECSCNM screen dark backgr. csi ? 5 l
18830 # SM DECOM move within margins: csi ? 6 h
18831 # RM DECOM move outside margins: csi ? 6 l
18832 # SM DECAWM auto right margin: csi ? 7 h
18833 # RM DECAWM auto right margin: csi ? 7 l
18834 # SM DECARM auto repeat: csi ? 8 h
18835 # RM DECARM auto repeat: csi ? 8 l
18836 # DECSASD Select active main: csi 0 $ }
18837 # DECSASD Select active status: csi 1 $ }
18838 # DECSSDT Select status none: csi 0 $ ~
18839 # DECSSDT Select status indic.: csi 1 $ ~
18840 # DECSSDT Select status host-wr: csi 2 $ ~
18841 # SM DECTCEM Visible cursor: csi ? 2 5 h
18842 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18843 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18844 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18845 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18846 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18847 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18848 # Char. and Line attributes: csi Ps ... Ps m
18849 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18850 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18851 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18852 bq300-8|Bull vt320 full 8 bits 80 columns,
18853 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18854 cols#80, it#8, lines#24, vt#3, wsl#80,
18855 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18856 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18857 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18858 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18859 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18860 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18861 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
18862 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18863 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18864 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18865 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
18866 ind=\ED, is1=\E[63;2"p\E[2h,
18867 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18868 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18869 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18870 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18871 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18872 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18873 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18874 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18875 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18876 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18877 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18878 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18879 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
18880 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
18881 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
18882 s0ds=\E(B, s1ds=\E(0, sc=\E7,
18883 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18884 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
18885 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18886 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18887 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18888 flash=\233?5l$<50>\233?5h,
18889 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18891 bq300-8w|Bull vt320 8-bit 132 columns,
18893 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18894 rs2=\233?3h, use=bq300-8,
18895 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18897 flash=\233?5l$<50>\233?5h,
18898 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18899 rs2=\233?3h, use=bq300-8,
18901 # This entry is used for terminals with vt320 emulation mode
18902 # a 102 keys keyboard (PC scancode !) and following set-up :
18903 # 8 bit ISO Latin Character Set (ISO 8859-1),
18904 # 7 bit Control Characters,
18905 # 80 columns screen.
18906 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18907 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18908 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18909 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18910 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18911 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18912 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18913 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18914 flash=\E[?5l$<50>\E[?5h,
18915 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18917 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18919 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18920 rs2=\E[?3h, use=bq300-pc,
18921 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18923 flash=\E[?5l$<50>\E[?5h,
18924 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18925 rs2=\E[?3h, use=bq300-pc,
18926 # 8 bit ISO Latin Character Set (ISO 8859-1),
18927 # 8 bit Control Characters,
18928 # 80 columns screen.
18929 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18930 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18931 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18932 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18933 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18934 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18935 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18936 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18937 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18938 flash=\E[?5l$<50>\E[?5h,
18939 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18941 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18943 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18944 rs2=\E[?3h, use=bq300-8-pc,
18945 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18947 flash=\E[?5l$<50>\E[?5h,
18948 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18949 rs2=\E[?3h, use=bq300-8-pc,
18951 #======================================================#
18952 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18953 #======================================================#
18955 # normal mode, 8 bits, 80 columns terminal.
18957 # RIS reset initial state: ^[c
18958 # BLE bell enable ^[h
18959 # BLD bell disable ^[g
18960 # CAMS char. attr. mode set ^[[D
18961 # CAMR char. attr. mode reset ^[[G
18963 # KBU keyboard unlock (set) ^[[W
18964 # KBL keyboard lock (reset) ^[[X
18965 # CM character mode (async.) ^[k
18966 # NEP non echoplex mode (by host) ^[l
18967 # EP echoplex mode (by host) ^[m
18968 # IM insert mode set ^[[I
18969 # IM insert mode reset ^[[J
18970 # RMS roll mode set ^[r
18971 # RMR roll mode reset ^[q
18972 # SM78 set mode vip7800 ^[[1q
18973 # SD scroll up (72 lines) ^[[0s
18974 # SD scroll down (72 lines) ^[[1s
18975 # RBM block mode reset ^[[E
18976 # SLS status line set ^[w
18977 # SLR status line reset ^[v
18978 # SLL status line lock ^[O
18979 # LGS Line-graphic mode set ^[G
18980 # LGR Line-graphic mode reset ^[F
18981 # TBC tab clear (at cursor pos.) ^[[g
18982 # TBI tab initialize ^[[N
18983 # TBS tab set (at cursor pos.) ^[p
18984 # PDS print data space ^[[0p
18985 # PHD print host data ^[[3p
18986 # PDT print data terminator ^[[<p
18987 # PRES print adapter reset ^[[2p
18988 # SSPR multi-part. reset ^[[<>u
18989 # SSP0 partition 0 set ^[[00u
18990 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18991 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18992 # SSP3 partition n format 3 ^[[PnPnu
18993 # ATR attribute (visual)
18996 # hide (blank) : ^[sH
18998 # inverse video : ^[sI
19003 # This covers the vip7800 and BQ3155-vip7800
19004 vip|Bull Questar 3155-7800,
19005 am, eslok, hs, km, mc5i, msgr, xenl, xon,
19006 cols#80, it#8, lines#24, vt#3, wsl#80,
19007 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
19008 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19009 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
19010 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
19011 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
19012 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
19013 is2=\E[00u\E[<>001001024080024080u\E[01u,
19014 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
19015 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
19016 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
19017 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
19018 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
19019 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
19020 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
19021 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
19022 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
19023 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
19024 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
19025 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
19026 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
19027 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
19028 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
19029 smul=\Es_, tbc=\E[N, tsl=\Ew,
19030 # normal screen, 8 bits, 132 columns terminal.
19031 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
19033 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
19034 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
19036 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
19037 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
19038 cols#132, lines#72, wsl#132,
19039 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
19044 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
19045 # that is smaller than the screen, and puts up a warning message
19046 # outside the window. Te erases the warning message, puts the
19047 # window back to be the whole screen, and puts the cursor at just
19048 # below the small window. I defined <cnorm> and <civis> to really turn
19049 # the cursor on and off, but I have taken this out since I don't
19050 # like the cursor being turned off when vi exits.
19051 cg7900|chromatics|chromatics 7900,
19054 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
19055 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
19056 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
19057 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
19058 rmso=\001C1\,\001c2\,,
19059 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
19060 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
19062 #### Computer Automation
19065 ca22851|computer automation 22851,
19068 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
19069 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
19070 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
19075 # This entry has correct padding and the undocumented "ri" capability
19076 cyb83|xl83|cybernex xl-83,
19079 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
19080 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
19081 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
19082 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
19083 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
19084 cyb110|mdl110|cybernex mdl-110,
19087 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
19088 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19089 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
19090 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
19091 ht=\011$<43>, ich1=\016A\035$<3.5>,
19092 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
19096 # Datapoint is gone. They used to be headquartered in Texas.
19097 # They created ARCnet, an Ethernet competitor that flourished for a while
19098 # in the early 1980s before 3COM got wise and cut its prices. The service
19099 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
19102 dp3360|datapoint|datapoint 3360,
19105 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
19106 ed=^_, el=^^, home=^], ind=^J,
19108 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
19109 # The Datapoint 8242 Workstation was sold at least between 1985
19110 # and 1989. To make the terminal work with this entry, press
19111 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
19112 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
19113 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
19114 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
19115 # fact unusable because the strings sent by the terminal conflict
19116 # with other keys).
19117 # The terminal is capable of displaying "box draw" characters.
19118 # For each graphic character you must send 2 ESC's (\E\E) followed
19119 # by a control character as follows:
19120 # character meaning
19121 # ========= =======
19124 # ctrl-G bottom tee
19127 # ctrl-J top left corner
19128 # ctrl-K top right corner
19129 # ctrl-L bottom left corner
19130 # ctrl-M bottom right corner
19131 # ctrl-N horizontal line
19132 # ctrl-O vertical line
19133 # Unfortunately this cannot be fitted into the termcap/terminfo
19134 # description scheme.
19135 dp8242|datapoint 8242,
19138 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
19139 cr=^M, cub1=^H, cud1=^J,
19140 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
19141 home=^U, ht=^I, il1=\E^T, ind=^C,
19142 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19143 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
19144 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
19145 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
19146 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
19147 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19148 smso=\E^E, smul=\E^F,
19149 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
19151 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
19153 # These entries are DEC's official terminfos for its older terminals.
19154 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
19155 # Engineering for more information. Updated terminfos and termcaps
19156 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
19162 bel=^G, cr=^M, cub1=^H, cud1=^J,
19166 bel=^G, cr=^M, cub1=^H, cud1=^J,
19170 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19171 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19175 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19176 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19177 el=\EK, ht=^I, ind=^J, ri=\EI,
19178 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19179 vt61|vt-61|vt61.5|dec vt61,
19181 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19182 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19183 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19184 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19187 # The gigi does standout with red!
19188 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19189 gigi|vk100|dec gigi graphics terminal,
19192 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19193 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19194 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19195 el=\E[K, ht=^I, ind=^J,
19196 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19197 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19198 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19199 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19200 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19203 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19204 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19205 # grossly-overpriced failure (among other things, DEC's OS didn't include
19206 # a format program, so you had to buy pre-formatted floppies from DEC at
19207 # a hefty premium!).
19208 pro350|decpro|dec pro console,
19210 cols#80, it#8, lines#24,
19211 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19212 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19213 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19214 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19215 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19216 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19217 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19222 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19223 dw2|decwriter|dw|decwriter II,
19226 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19227 # \E(B Use U.S. character set (otherwise # => british pound !)
19228 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19229 # \E[w 10 char/in pitch
19230 # \E[1;132 full width horizontal margins
19231 # \E[2g clear all tab stops
19233 # \E[66t 66 lines/page (for \f)
19234 # \E[1;66r full vertical page can be printed
19235 # \E[4g clear vertical tab stops
19236 # \E> disable alternate keypad mode (so it transmits numbers!)
19237 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19238 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19241 # The dw3 does standout with wide characters.
19243 dw3|la120|decwriter III,
19246 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19247 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19248 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19249 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19253 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19254 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19256 # These aren't official
19257 ln03|dec ln03 laser printer,
19260 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19261 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19263 ln03-w|dec ln03 laser printer 132 cols,
19265 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19266 kcud1=^J, nel=^M^J, use=ln03,
19268 #### Delta Data (dd)
19271 # Untested. The cup sequence is hairy enough that it probably needs work.
19272 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19273 # There are BSD-derived termcap entries floating around for this puppy
19274 # that are *certainly* wrong.
19275 delta|dd5000|delta data 5000,
19278 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19279 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19280 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19282 #### Digital Data Research (ddr)
19285 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19286 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19288 cols#80, it#8, lines#24, vt#3,
19289 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19290 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19291 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19292 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19293 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19294 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19295 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19296 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19297 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19298 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19299 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19302 #### Evans & Sutherland
19305 # Jon Leech <leech@cs.unc.edu> tells us:
19306 # The ps300 was the Evans & Sutherland Picture System 300, a high
19307 # performance 3D vector graphics system with a bunch of specialized hardware.
19308 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19309 # evolutions including (limited) color versions such as the PS330C. PS300s
19310 # were effectively obsolete by the late 80s, replaced by raster graphics
19311 # systems, although specialized applications like molecular modelling
19312 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19313 # are out of production, though of course E&S is very much alive (in 1996).
19314 # (ps300: changed ":pt@:" to "it@" -- esr)
19316 ps300|Picture System 300,
19319 rmso@, rmul@, smso@, smul@, use=vt100,
19321 #### General Electric (ge)
19324 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19327 bel=^G, cr=^M, cud1=^J, ind=^J,
19329 #### Heathkit/Zenith
19332 # Here is a description of the H19 DIP switches:
19335 # 0-3 = baud rate as follows:
19340 # 0 1 0 1 1200 baud
19341 # 1 0 0 0 2400 baud
19342 # 1 0 1 0 4800 baud
19343 # 1 1 0 0 9600 baud
19344 # 1 1 0 1 19.2K baud
19346 # 4 = parity (0 = no parity)
19347 # 5 = even parity (0 = odd parity)
19348 # 6 = stick parity (0 = normal parity)
19349 # 7 = full duplex (0 = half duplex)
19352 # 0 = block cursor (0 = underscore cursor)
19353 # 1 = no key click (0 = keyclick)
19354 # 2 = wrap at end of line (0 = no wrap)
19355 # 3 = auto LF on CR (0 = no LF on CR)
19356 # 4 = auto CR on LF (0 = no CR on LF)
19357 # 5 = ANSI mode (0 = VT52 mode)
19358 # 6 = keypad shifted (0 = keypad unshifted)
19359 # 7 = 50Hz refresh (1 = 60Hz refresh)
19361 # Factory Default settings are as follows:
19363 # S401 1 0 0 0 1 1 0 0
19364 # S402 0 0 0 0 0 0 0 0
19365 # (h19: I added <rmam>/<smam> based on the init string;
19366 # also added empty <acsc> to suppress a tic warning -- esr)
19367 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19368 OTbs, am, mir, msgr,
19369 cols#80, it#8, lines#24,
19370 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19371 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19372 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19373 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19374 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19375 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19376 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19377 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19378 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19379 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19380 h19-bs|heathkit w/keypad shifted,
19381 rmkx=\Eu, smkx=\Et, use=h19-b,
19382 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19383 rmkx=\Eu, smkx=\Et, use=h19-u,
19384 # (h19: merged in <ip> from BSDI hp19-e entry>;
19385 # also added empty <acsc> to suppress a tic warning --esr)
19386 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19387 # Tim tells us that:
19388 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19389 # This terminal suffers from the same famous insert-mode padding lossage
19390 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19391 # unusable on this box, since even a half-scroll up or down the window
19392 # causes flaming terminal death.
19394 # On the Z19, the only way I have found around this problem is to remove
19395 # the :al: and :dl: entries entirely. No amount of extra padding will
19396 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19397 # makes Emacs a little slower, but it remains in the land of the living.
19399 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19400 OTbs, am, eslok, hs, mir, msgr,
19401 cols#80, it#8, lines#24,
19402 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19403 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19404 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19405 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19406 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19407 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19408 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19409 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19410 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19411 h19-u|heathkit with underscore cursor,
19412 cnorm@, cvvis@, use=h19-b,
19413 h19-g|h19g|heathkit w/block cursor,
19414 cnorm=\Ex4, cvvis@, use=h19-b,
19415 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19417 dl1=\EM, il1=\EL, use=h19,
19419 # The major problem with the Z29 is that it requires more padding than the Z19.
19421 # The problem with declaring an H19 to be synonymous with a Z29 is that
19422 # it needs more padding. It especially loses if a program attempts
19423 # to put the Z29 into insert mode and insert text at 9600 baud. It
19424 # even loses worse if the program attempts to insert tabs at 9600
19425 # baud. Adding padding to text that is inserted loses because in
19426 # order to make the Z29 not die, one must add so much padding that
19427 # whenever the program tries to use insert mode, the effective
19428 # rate is about 110 baud.
19430 # What program would want to put the terminal into insert mode
19431 # and shove stuff at it at 9600 baud you ask?
19433 # Emacs. Emacs seems to want to do the mathematically optimal
19434 # thing in doing a redisplay rather than the practical thing.
19435 # When it is about to output a line on top of a line that is
19436 # already on the screen, instead of just killing to the end of
19437 # the line and outputting the new line, it compares the old line
19438 # and the new line and if there are any similarities, it
19439 # constructs the new line by deleting the text on the old line
19440 # on the terminal that is already there and then inserting new
19441 # text into the line to transform it into the new line that is
19442 # to be displayed. The Z29 does not react kindly to this.
19444 # But don't cry for too long.... There is a solution. You can make
19445 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19446 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19447 # line will be really slow", you say. Well there is a sort of a
19448 # solution to that too. There is an insert character option on
19449 # the Z29 that will insert one character. Unfortunately, it
19450 # involves putting the terminal into ansi mode, inserting the
19451 # character, and changing it back to H19 mode. All this takes 12
19452 # characters. Pretty expensive to insert one character, but it
19453 # works. Either Emacs doesn't try to use its inserting hack when
19454 # it's only given an insert character ability or the Z29 doesn't
19455 # require padding with this (the former is probably more likely,
19456 # but I haven't checked it out).
19457 # (z29: added empty <acsc> to suppress a tic warning, merged in
19458 # status line capabilities from BRL entry --esr)
19459 z29|zenith29|z29b|zenith z29b,
19460 OTbs, OTpt, am, eslok, hs, mir, msgr,
19461 OTkn#10, cols#80, lines#24,
19462 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19463 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19464 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19465 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19466 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19467 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19468 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19469 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19470 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19471 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19472 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19473 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19474 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19475 # the world is stable. <rs1> causes the terminal to be reset to the state
19476 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19477 # cursor, bc -> block cursor.
19478 # From: Mike Meyers
19479 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19480 # looks vt100-compatible -- esr)
19481 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19482 OTbs, OTpt, am, eslok, hs, mir, msgr,
19483 OTkn#10, cols#80, it#8, lines#24,
19484 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19485 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19486 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19487 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19488 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19489 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19490 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19491 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19492 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19493 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19494 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19495 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19496 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19497 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19498 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19499 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19500 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19501 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19503 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19504 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19506 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19507 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19509 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19510 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19511 am, eslok, hs, mc5i, mir, msgr, xon,
19513 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19514 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19515 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19516 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19517 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19518 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19519 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19520 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19521 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19522 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19523 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19524 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19525 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19526 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19527 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19528 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19529 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19530 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19531 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19533 # From: Brad Brahms <Brahms@USC-ECLC>
19534 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19535 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19536 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19537 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19538 OTbs, OTpt, mir, msgr,
19539 OTkn#10, cols#80, it#8, lines#24,
19540 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19541 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19542 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19543 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19544 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19545 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19546 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19547 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19548 smir=\E@, smso=\Ep,
19549 p19|h19-b with il1/dl1,
19550 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19551 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19552 # (ztx: removed duplicate :sr: -- esr)
19553 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19554 OTbs, am, eslok, hs,
19555 cols#80, it#8, lines#24,
19556 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19557 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19558 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19559 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19560 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19561 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19562 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19563 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19565 #### IMS International (ims)
19567 # There was a company called IMS International located in Carson City,
19568 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19569 # bus/Z80 hardware and a line of terminals called Ultimas.
19572 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19573 ims950-b|bare ims950 no init string,
19575 # (ims950: removed obsolete ":ko@:" -- esr)
19576 ims950|ims televideo 950 emulation,
19578 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19579 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19580 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19581 ims950-rv|ims tvi950 rev video,
19583 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19584 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19585 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19587 cols#80, it#8, lines#24,
19588 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19589 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19590 ht=^I, if=/usr/share/tabset/vt100,
19591 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19592 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19593 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19596 #### Intertec Data Systems
19598 # I think this company is long dead as of 1995. They made an early CP/M
19599 # micro called the "Intertec Superbrain" that was moderately popular,
19600 # then sank out of sight.
19603 superbrain|intertec superbrain,
19606 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19607 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19608 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19609 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19610 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19611 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19612 # and the reverse is actually true. Try it. -- esr)
19613 intertube|intertec|Intertec InterTube,
19616 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19617 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19618 ind=^J, rmso=\E0@, smso=\E0P,
19619 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19620 # are typing and a command comes in, the keystrokes you type get interspersed
19621 # with the command and it messes up
19622 intertube2|intertec data systems intertube 2,
19624 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19625 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19626 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19628 #### Ithaca Intersystems
19630 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19631 # past. They used to be reachable at:
19633 # Ithaca Intersystems
19634 # 1650 Hanshaw Road
19635 # Ithaca, New York 14850
19637 # However, the outfit went bankrupt years ago.
19640 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19641 # These entries were written (originally in termcap syntax) by Brian Yandell
19642 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19643 # University of Wisconsin.
19645 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19646 # removed <if=/usr/share/tabset/init.graphos> and
19647 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19648 graphos|graphos III,
19650 cols#80, it#8, lines#24,
19651 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19652 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19653 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19654 cuu=\E[%p1%dA, cuu1=\E[A,
19655 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19656 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19657 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19658 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19659 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19660 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19661 smir=\E[4h, smso=\E[7m,
19662 graphos-30|graphos III with 30 lines,
19664 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19668 # These people used to be reachable at:
19671 # 1393 Main Street,
19672 # Waltham, MA 02154
19673 # Vox: (617)-890-5796.
19675 # However, if you call that number today you'll get an insurance company.
19676 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19677 # 26 Feb 1997 that says:
19679 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19680 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19681 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19682 # panel-mount etc). I can be emailed at sonfour@aol.com
19684 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19685 # dated 1984. According to the manual, it featured Tek 4010/4014
19686 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19689 modgraph|mod24|modgraph terminal emulating vt100,
19692 cvvis=\E\^9;0s\E\^7;1s,
19693 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19694 rf@, ri=\EM\E[K$<5/>, use=vt100,
19695 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19696 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19698 cols#80, it#8, lines#24,
19699 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19700 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19701 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19702 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19705 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19706 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19707 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19708 # mark and using delete-to-killbuffer work correctly. However, we would
19709 # like normal mode of operation to be using a Modgraph with 48 line setting.
19710 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19711 # the setting mark and delete-to-killbuffer results in the deletion of only
19712 # the line the mark is set on.
19713 # We've discovered that the delete-to-killbuffer works correctly
19714 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19715 # the first line disappears but a ctrl-l shows that it did work
19717 modgraph48|mod|Modgraph w/48 lines,
19718 OTbs, OTpt, am, xenl,
19719 cols#80, it#8, lines#48, vt#3,
19720 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19721 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19722 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19723 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19724 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19725 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19726 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19727 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19728 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19729 smso=\E[7m, smul=\E[4m,
19731 #### Morrow Designs
19733 # This was George Morrow's company. They started in the late 1970s making
19734 # S100-bus machines. They used to be reachable at:
19737 # 600 McCormick St.
19738 # San Leandro, CA 94577
19740 # but they're long gone now (1995).
19743 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19744 # Jeff's specimen was dated June 1984.
19745 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19746 mt70|mt-70|Morrow MD-70; native Morrow mode,
19747 am, mir, msgr, xon,
19748 cols#80, it#8, lines#24,
19749 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19750 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19751 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19752 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19753 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19754 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19755 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19756 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19757 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19758 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19759 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19760 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19761 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19762 smul=\EG1, tbc=\E0, use=adm+sgr,
19767 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19769 ex155|Motorola Exorterm 155,
19771 OTkn#5, OTug#1, cols#80, lines#24,
19772 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19773 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19774 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19775 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19776 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19780 # This company is still around in 1995, manufacturing point-of-sale systems.
19782 omron|Omron 8025AG,
19785 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19786 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19787 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19791 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19792 # were competition for things like the Tektronics 4025.
19795 # Ramtek 6221 from BRL, probably by Doug Gwyn
19796 # The following SET-UP modes are assumed for normal operation:
19797 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19798 # NEWLINE_OFF 80_COLUMNS
19799 # Other SET-UP modes may be set for operator convenience or communication
19800 # requirements; I recommend
19801 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19802 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19803 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19804 # Note that the Control-E key is useless on this brain-damaged terminal. No
19805 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19806 rt6221|Ramtek 6221 80x24,
19807 OTbs, OTpt, msgr, xon,
19808 OTkn#4, cols#80, it#8, lines#24, vt#3,
19809 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19810 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19811 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19812 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19813 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19814 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19815 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19816 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19817 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19818 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19819 rmso=\E[m, rmul=\E[m,
19820 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19821 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19822 smul=\E[4m, tbc=\E[3g,
19823 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19824 rt6221-w|Ramtek 6221 160x48,
19825 cols#160, lines#48,
19826 ll=\E[48;1H, use=rt6221,
19831 # RCA VP3301 or VP3501
19832 rca|rca vp3301/vp3501,
19835 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19836 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19842 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19843 # The following SET-UP modes are assumed for normal operation:
19844 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19845 # ONLINE ANSI CURSOR_VISIBLE
19846 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19847 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19848 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19849 # For use with graphics software, all graphics modes should be set to factory
19850 # default. Other SET-UP modes may be set for operator convenience or
19851 # communication requirements. No delays are specified; use "stty ixon -ixany"
19852 # to enable DC3/DC1 flow control!
19853 # I commented out the scrolling capabilities since they are too slow.
19854 hirez100|Selanar HiREZ-100,
19855 OTbs, OTpt, mir, msgr, xon,
19856 OTkn#4, cols#80, it#8, lines#48, vt#3,
19857 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19858 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19859 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19860 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19861 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19862 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19863 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19864 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19865 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19866 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19867 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19868 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19869 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19870 smul=\E[4m, tbc=\E[3g,
19871 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19872 cols#132, use=hirez100,
19877 # From University of Wisconsin
19878 vsc|Signetics Vsc Video driver by RMC,
19880 cols#80, it#8, lines#26,
19881 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19882 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19883 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19884 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19888 # Alan Frisbie <frisbie@flying-disk.com> writes:
19890 # As you may recall, the Soroc logo consisted of their name,
19891 # with the letter "S" superimposed over an odd design. This
19892 # consisted of a circle with a slightly smaller 15 degree (approx.)
19893 # wedge with rounded corners inside it. The color was sort of
19894 # a metallic gold/yellow.
19896 # If I had been more of a beer drinker it might have been obvious
19897 # to me, but it took a clue from their service department to make
19898 # me exclaim, "Of course!" The circular object was the top of
19899 # a beer can (the old removable pop-top style) and "Soroc" was an
19900 # anagram for "Coors".
19902 # I can just imagine the founders of the company sitting around
19903 # one evening, tossing back a few and trying to decide what to
19904 # call their new company and what to use for a logo.
19907 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19908 soroc120|iq120|soroc|soroc iq120,
19909 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19910 kcuf1=^L, kcuu1=^K, use=adm3a,
19911 soroc140|iq140|soroc iq140,
19914 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19915 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19916 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19917 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19918 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19919 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19920 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19922 #### Southwest Technical Products
19924 # These guys made an early personal micro called the M6800.
19925 # The ct82 was probably its console terminal.
19928 # (swtp: removed obsolete ":bc=^D:" -- esr)
19929 swtp|ct82|southwest technical products ct82,
19932 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19933 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19934 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19935 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19936 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19940 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19942 # Synertek used to make ICs, various 6502-based single-board process
19943 # control and hobbyist computers, and assorted peripherals including a
19944 # series of small inexpensive terminals (I think they were one of the
19945 # first to have a "terminal-on-a-keyboard", where the terminal itself
19946 # was only slightly larger than the keyboard).
19948 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19949 # was a 40x24 terminal that could connect to a standard TV through a
19950 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19951 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19952 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19953 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19954 # ROM and 2 ROMs as character generators. They were incredibly simple,
19955 # and I've never had any problems with mine (witness the fact that mine
19956 # was made in 1981 and is still working great... I've blown the video
19957 # output transistor a couple of times, but it's a 2N2222 :-)
19959 # The KTM-3 (which is what is listed in the terminfo file) was their
19960 # attempt at putting a KTM-2 in a box (and some models came with a
19961 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19962 # control and escape sequences are very different. The KTM-3 was always
19963 # real broken, at least according to the folks I've talked to about it.
19965 # The padding in the entry is probably off--these terminals were very
19966 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19967 # anyone with any sanity replaced the ROMs with something that provided
19968 # a reasonable subset of VT100 functionality, since the usual ROMs were
19969 # obviously very primitive... oh, you could get an upgraded ROM from
19970 # Synertek for some incredible amount of money, but what hacker with an
19971 # EPROM burner would do that? :)
19973 # Sorry I don't have any contact info; I believe they were located in
19974 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19975 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19976 # business these days.
19979 # Tested, seems to work fine with vi.
19980 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19983 clear=^Z, cub1=^H, cuf1=^L,
19984 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19986 #### Tab Office Products
19988 # TAB Products Co. - Palo Alto, California
19989 # Electronic Office Products,
19990 # 1451 California Avenue 94304
19992 # I think they're out of business.
19995 # The tab 132 uses xon/xoff, so no padding needed.
19996 # <smkx>/<rmkx> have nothing to do with arrow keys.
19997 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19998 # Seems to be no way to get rid of status line.
19999 # The manual for this puppy was dated June 1981. It claims to be VT52-
20000 # compatible but looks more vt100-like.
20001 tab132|tab|tab132-15|tab 132/15,
20003 OTdN@, cols#80, lines#24, lm#96,
20004 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
20005 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
20006 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
20007 tab132-w|tab132 in wide mode,
20009 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
20010 tab132-rv|tab132 in reverse-video mode,
20011 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
20012 tab132-w-rv|tab132 in reverse-video/wide mode,
20013 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
20018 # Research Incorporated
20019 # 6425 Flying Cloud Drive
20020 # Eden Prairie, MN 55344
20021 # Vox: (612)-941-3300
20023 # The Teleray terminals were all discontinued in 1992-93. RI still services
20024 # and repairs these beasts, but no longer manufactures them. The Teleray
20025 # people believe that all the types listed below are very rare now (1995).
20026 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
20027 # Model 100) that were ANSI-compatible.
20029 # Note two things called "teleray". Reorder should move the common one
20030 # to the front if you have either. A dumb teleray with the cursor stuck
20031 # on the bottom and no obvious model number is probably a 3700.
20034 t3700|dumb teleray 3700,
20037 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
20038 t3800|teleray 3800 series,
20040 cols#80, it#8, lines#24,
20041 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20042 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
20043 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
20044 t1061|teleray|teleray 1061,
20045 OTbs, am, km, xhp, xt,
20046 cols#80, it#8, lines#24, xmc#1,
20047 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20048 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20049 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
20050 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
20051 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
20052 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
20053 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
20055 t1061f|teleray 1061 with fast PROMs,
20056 dl1=\EM, il1=\EL, ip@, use=t1061,
20057 # "Teleray Arpa Special", officially designated as
20058 # "Teleray Arpa network model 10" with "Special feature 720".
20059 # This is the new (1981) fast microcode updating the older "arpa" proms
20060 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
20061 # converts the keypad to programmable function keys, and has other goodies.
20062 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
20063 # programs handle such lossage properly.
20064 # Note: this is NOT the old termcap's "t1061f with fast proms."
20065 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
20066 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
20067 t10|teleray 10 special,
20069 cols#80, it#8, lines#24, xmc#2,
20070 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
20071 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20072 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20073 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
20075 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
20076 # back/forth words. Put the function keys (f1-f10) where they can be
20077 # found, and turn off the other magic keys along the top row, except
20078 # for line/local. Do the magic appropriate to make the page shifts work.
20079 # Also toggle ^S/^Q for those of us who use Emacs.
20081 am, da, db, mir, xhp, xt,
20083 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
20084 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
20085 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
20086 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
20087 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
20088 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
20089 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
20090 smso=\E[7m, smul=\E[4m,
20092 #### Texas Instruments (ti)
20095 # The Silent 700 was so called because it was built around a quiet thermal
20096 # printer. It was portable, equipped with an acoustic coupler, and pretty
20097 # neat for its day.
20098 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
20101 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
20104 # Texas Instruments 916 VDT 7 bit control mode
20106 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
20108 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
20109 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
20110 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20111 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
20112 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
20113 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
20114 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
20115 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
20116 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
20117 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
20118 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
20119 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
20120 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
20121 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
20124 # Texas Instruments 916 VDT 8 bit control mode
20126 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
20127 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
20128 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
20129 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
20130 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20131 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
20132 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
20134 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
20136 ti916-132|Texas Instruments 916 VDT vt220 132 column,
20137 cols#132, use=ti916,
20139 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
20141 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
20142 cols#132, use=ti916-8,
20143 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
20145 cols#80, it#8, lines#24,
20146 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20147 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20148 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20149 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20150 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20151 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20152 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
20153 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
20154 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
20155 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20156 smul=\E[4m, tbc=\E[3g,
20157 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
20159 cols#80, it#8, lines#24,
20160 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20161 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20162 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20163 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20164 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20165 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20166 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
20167 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
20168 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
20169 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20170 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20171 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20172 cols#132, use=ti924,
20173 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20174 cols#132, use=ti924-8,
20175 ti931|Texas Instruments 931 VDT,
20178 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20179 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20180 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20181 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20182 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20183 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20184 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20185 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20186 sgr0=\E4@, smso=\E4A, smul=\E4D,
20187 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20188 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20189 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20190 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20191 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20192 ti_ansi|basic entry for ti928,
20193 am, bce, eo, xenl, xon,
20194 colors#8, cols#80, it#8, lines#25, pairs#64,
20195 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20196 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20197 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20198 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20199 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20200 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20201 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20202 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20203 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20204 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20205 smso=\E[7m, smul=\E[4m,
20207 # 928 VDT 7 bit control mode
20209 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20210 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20211 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20212 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20213 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20214 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20216 # 928 VDT 8 bit control mode
20218 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20219 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20220 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20221 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20222 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20223 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20224 kpp=\233T, kprt=\23335~, use=ti_ansi,
20229 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20230 # had just <smso>=\EG6 which I think means standout was supposed to be
20231 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20232 # <invis> might work-- esr)
20233 zen30|z30|zentec 30,
20236 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20237 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20238 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20239 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20240 smul@, use=adm+sgr,
20241 # (zen50: this had extension capabilities
20242 # :BS=^U:CL=^V:CR=^B:
20243 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20244 # which were also in the original entry -- esr)
20245 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20246 zen50|z50|zentec zephyr,
20248 cols#80, lines#24, xmc#1,
20249 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20250 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20251 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20252 rmul@, smul@, use=adm+sgr,
20254 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20255 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20258 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20259 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20260 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20261 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20262 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20263 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20264 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20265 smso=\EM$, smul=\EM0,
20267 ######## OBSOLETE UNIX CONSOLES
20270 #### Apollo consoles
20272 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20273 # labeled HP700s now.
20276 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20277 apollo|apollo console,
20280 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20281 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20282 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20283 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20284 smso=\ES, smul=\EU, vpa=\EO+\s,
20286 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20287 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20288 # both these capabilities.
20289 apollo_15P|apollo 15 inch display,
20290 rmir@, smir@, use=vt132,
20291 apollo_19L|apollo 19 inch display,
20292 rmir@, smir@, use=vt132,
20293 apollo_color|apollo color display,
20294 rmir@, smir@, use=vt132,
20298 # This actually describes the generic SVr4 display driver for Intel boxes.
20299 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
20300 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
20301 att6386|at386|386at|AT&T WGS 6386 console,
20303 cols#80, it#8, lines#25,
20304 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20305 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
20306 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
20307 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20308 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20309 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20310 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20311 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
20312 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
20313 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
20314 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20315 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
20316 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20317 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
20318 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
20319 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20321 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
20322 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
20323 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
20324 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
20325 pc6300plus|AT&T 6300 plus,
20328 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
20329 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
20330 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
20331 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
20332 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
20333 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20334 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
20335 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
20336 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20337 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20339 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
20341 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
20342 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
20343 # is broken. All the special key sequences are broken, making it unusable
20344 # with Emacs. The problem stems from the following:
20346 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
20347 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
20348 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
20349 # uses resizable terminal windows, but the bundled terminal program always
20350 # uses an 80x24 window (and doesn't support seem to support a 132-column
20353 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
20354 # library which was a superset of SVr3.5 curses (called tam, for "terminal
20355 # access method".) tam includes support for real, overlapping windows,
20356 # onscreen function key labels, and bitmap graphics. But since the primary
20357 # user interface on the UNIX PC was a GUI program (ua, for "user
20358 # assistant",) and remote administration was considered important for the
20359 # machine, tam also supported VT100-compatible terminals attached to the
20360 # serial port or used across the StarLan network. To simulate the extra keys
20361 # not present on a VT100, users could press ESC and a two-letter sequence,
20362 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
20363 # however, were not the same as those sent by the actual Undo key. The
20364 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
20365 # (If you're interested in adding some of the tam calls to ncurses, btw, I
20366 # have the full documentation and several programs which use tam. It also
20367 # used an extended terminfo format to describe key sequences, special
20368 # highlighting modes, etc.)
20370 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
20371 # there are two sequences for every key-modifier combination (local keyboard
20372 # sequence and remote "VT100" sequence.) But I doubt many people are trying
20373 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
20374 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
20375 # seem to have been built from the manual describing the VT100 sequences.
20376 # This means it doesn't work for a real live UNIX PC.
20378 # FONTS: The UNIX PC also has a strange interpretation of "alternate
20379 # character set". Rather than the VT100 graphics you might expect, it allows
20380 # up to 8 custom fonts to be loaded at any given time. This means that
20381 # programs expecting VT100 graphics will usually be disappointed. For this
20382 # reason I have disabled the smacs/rmacs sequences, but they could easily be
20383 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
20384 # manpage), should you wish to do so:
20386 # SGR10 - Select font 0 - ESC [ 10 m or SO
20387 # SGR11 - Select font 1 - ESC [ 11 m or SI
20388 # SGR12 - Select font 2 - ESC [ 12 m
20390 # SGR17 - Select font 7 - ESC [ 17 m
20392 # Graphics for line drawing are not reliably found at *any* character
20393 # location because the UNIX PC has dynamically reloadable fonts. I use font
20394 # 0 for regular text and font 1 for italics, but this is by no means
20395 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
20397 # MISC: The cursor visible/cursor invisible sequences were swapped in the
20398 # distributed terminfo.
20400 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
20401 # the UNIX PC terminfo entry. The modified version works great with Lynx,
20402 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
20403 # attached by serial cable. In Emacs, even the Undo key works, and many
20404 # applications can now use the F1-F8 keys.
20407 # Terminfo entry for the AT&T Unix PC 7300
20408 # from escape(7) in Unix PC 7300 Manual.
20409 # Somewhat similar to a vt100-am (but different enough
20410 # to redo this from scratch.)
20412 # /***************************************************************
20414 # * FONT LOADING PROGRAM FOR THE UNIX PC
20416 # * This routine loads a font defined in the file ALTFONT
20417 # * into font memory slot #1. Once the font has been loaded,
20418 # * it can be used as an alternative character set.
20420 # * The call to ioctl with the argument WIOCLFONT is the key
20421 # * to this routine. For more information, see window(7) in
20422 # * the PC 7300 documentation.
20423 # ***************************************************************/
20424 # #include <string.h> /* needed for strcpy call */
20425 # #include <sys/window.h> /* needed for ioctl call */
20426 # #define FNSIZE 60 /* font name size */
20427 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
20429 # * The file /usr/lib/wfont/special.8.ft comes with the
20430 # * standard PC software. It defines a graphics character set
20431 # * similar to that of the Teletype 5425 terminal. To view
20432 # * this or other fonts in /usr/lib/wfont, use the command
20433 # * cfont <filename>. For further information on fonts see
20434 # * cfont(1) in the PC 7300 documentation.
20437 # struct altfdata /* structure for alt font data */
20439 # short altf_slot; /* memory slot number */
20440 # char altf_name[FNSIZE]; /* font name (file name) */
20444 # int wd; /* window in which altfont will be */
20445 # struct altfdata altf;
20446 # altf.altf_slot=1;
20447 # strcpy(altf.altf_name,ALTFONT);
20448 # for (wd =1; wd < 12; wd++) {
20449 # ioctl(wd, WIOCLFONT,&altf);
20453 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
20454 # they're confirmed by the man page for the System V display---esr)
20456 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
20458 cols#80, it#8, lines#24,
20459 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
20460 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
20461 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20462 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20463 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20464 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
20465 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
20466 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
20467 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
20468 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
20469 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
20470 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
20471 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
20472 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
20473 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
20474 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
20475 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
20476 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
20477 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
20478 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
20479 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
20480 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
20483 #### Convergent Technology
20485 # Burroughs bought Convergent shortly before it merged with Univac.
20486 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20487 # from 1991 or earlier).
20490 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20491 # (aws: removed unknown :dn=^K: -- esr)
20492 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20494 OTug#0, cols#80, lines#28, xmc#0,
20495 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20496 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20497 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20498 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20499 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20500 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20502 awsc|Convergent Technologies AWS workstation under CTOS,
20504 OTug#0, cols#80, lines#24, xmc#0,
20505 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20506 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20507 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20508 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20514 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20515 # The digital uVax II's had a graphic display called a qdss. It was
20516 # supposed to be a high performance graphic accelerator, but it was
20517 # late to market and barely appeared before faster dumb frame buffers
20518 # appeared. I have only used this display while running X11. However,
20519 # during bootup, it was in text mode, and probably had a terminal emulator
20520 # within it. And that is what your termcap entry is for. In graphics
20521 # mode the screen size is 1024x864 pixels.
20522 qdss|qdcons|qdss glass tty,
20524 cols#128, lines#57,
20525 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20526 cup=\E=%p1%c%p2%c, cuu1=^K,
20528 #### Fortune Systems consoles
20530 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20531 # in their day; I (esr) used one myself for a year or so around 1984.
20532 # They had no graphics, though, and couldn't compete against Suns and
20536 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20537 # (This had extension capabilities
20538 # :rv=\EH:re=\EI:rg=0:GG=0:\
20539 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20540 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20541 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20542 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20543 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20544 # to force both magic cookie glitches off. Once upon a time, I
20545 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20546 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20547 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20548 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20549 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20550 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20551 fos|fortune|Fortune system,
20554 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20555 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20556 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20557 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20558 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20559 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20560 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20561 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20562 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20563 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20564 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20565 smso=^\H`, smul=^\HP,
20567 #### Masscomp consoles
20569 # Masscomp has gone out of business. Their product line was purchased by
20570 # comany in Georgia (US) called "XS International", parts and service may
20571 # still be available through them.
20574 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20575 masscomp|masscomp workstation console,
20577 cols#80, it#8, lines#24,
20578 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20579 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20580 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20581 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20582 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20583 masscomp1|masscomp large screen version 1,
20584 cols#104, lines#36, use=masscomp,
20585 masscomp2|masscomp large screen version 2,
20586 cols#64, lines#21, use=masscomp,
20591 # OSF/1 1.1 Snapshot 2
20592 pmcons|pmconsole|PMAX console,
20594 cols#128, lines#57,
20595 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
20596 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20597 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
20599 #### Other consoles
20600 # The following is a version of the ibm-pc entry distributed with PC/IX,
20601 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
20602 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
20603 # (the former is untrue, and the latter failed under UCB/man); standout and
20604 # underline modes have been added. Note: this entry describes the "native"
20605 # capabilities of the PC monochrome display, without ANY emulation; most
20606 # communications packages (but NOT PC/IX connect) do some kind of emulation.
20607 pcix|PC/IX console,
20610 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
20611 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
20612 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
20615 # (ibmpcx: this entry used to be known as ibmx.
20616 # It formerly included the following extension capabilities:
20617 # :GC=b:GL=v:GR=t:RT=^J:\
20618 # :GH=\E[196g:GV=\E[179g:\
20619 # :GU=\E[193g:GD=\E[194g:\
20620 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
20621 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
20622 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
20623 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
20624 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
20625 # what was there before. -- esr)
20626 ibmpcx|xenix|ibmx|IBM PC xenix console display,
20629 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
20630 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20631 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
20632 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
20633 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
20634 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
20636 ######## OTHER OBSOLETE TYPES
20638 # These terminals are *long* dead -- these entries are retained for
20639 # historical interest only.
20642 #### Obsolete non-ANSI software emulations
20645 # CTRM terminal emulator
20646 # 1. underlining is not allowed with colors: first, is is simulated by
20647 # black on white, second, it disables background color manipulations.
20648 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20649 # so we have to save their status in the static registers A, B and H
20650 # respectively, to be able to restore them when color changes
20651 # (because any color change turns off ALL attributes)
20652 # 3. <bold> and <rev> sequences alternate modes,
20653 # rather than simply entering them. Thus we have to check the
20654 # static register B and H to determine the status, before sending the
20656 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20657 # and then reset colors
20658 # 5. implementation of the protect mode would badly penalize the performance.
20659 # we would have to use \E&bn sequence to turn off colors (as well as all
20660 # other attributes), and keep the status of protect mode in yet another
20661 # static variable. If someone really needs this mode, they would have to
20662 # create another terminfo entry.
20663 # 6. original color-pair is white on black.
20664 # store the information about colors into static registers
20665 # 7. set foreground color. it performs the following steps.
20666 # 1) turn off all attributes
20667 # 2) turn on the background and video attributes that have been turned
20668 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20669 # 3) turn on foreground attributes
20670 # 4) store information about foreground into U,V,W static registers
20671 # 8. turn on background: similar to turn on foreground above
20672 ctrm|C terminal emulator,
20674 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20675 pairs#63, pb#19200, vt#6,
20676 bel=^G, blink=\E&dA%{1}%PA,
20677 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20678 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20679 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20680 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20681 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20682 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20683 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20684 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20685 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20686 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20687 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20688 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20689 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20690 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20691 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20693 # gs6300 - can't use blue foreground, it clashes with underline;
20694 # it's simulated with cyan
20695 # Bug: The <op> capability probably resets attributes.
20696 # (gs6300: commented out <rmln> (no <smln>) --esr)
20697 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20698 am, bce, msgr, xon,
20699 colors#8, cols#80, it#8, lines#24, pairs#63,
20700 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20701 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20702 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20703 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20704 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20705 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20706 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20707 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20708 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20709 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20710 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20711 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20712 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20713 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20715 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20716 # MS-Kermit with Heath-19 emulation mode enabled
20717 # (h19k: changed ":pt@:" to ":it@"
20718 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20723 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20724 # Software (formerly Peripherals Computers & Supplies, Inc) of
20725 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20726 # also be reached at support@synergy.com.
20727 versaterm|versaterm vt100 emulator for the macintosh,
20729 cols#80, it#8, lines#24,
20730 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20731 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20732 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20733 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20734 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20735 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20736 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20737 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20738 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20739 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20740 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20741 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20744 # From: Rick Thomas <ihnp4!btlunix!rbt>
20745 # (xtalk: I added <rmam>/<smam> based on the init string.
20746 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20747 am, mir, msgr, xon,
20748 cols#80, it#8, lines#24, vt#3, xmc#1,
20749 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20750 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20751 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20752 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20753 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20754 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20755 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20756 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20757 rmkx=\E[?1l\E>, rmso=\E[m\s,
20758 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20759 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20760 tbc=\E[3g, use=vt100+fnkeys,
20762 # The official PC terminal emulator program of the AT&T Product Centers.
20763 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20764 simterm|attpc running simterm,
20767 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20768 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20769 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20770 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20772 #### Daisy wheel printers
20774 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20775 # wheel terminals. These are now largely obsolete.
20778 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20779 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20782 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20783 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20784 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20786 is2=\r \E9, use=diablo1620,
20787 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20788 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20789 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20791 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20793 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20795 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20796 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20798 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20799 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20800 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20801 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20802 # around all of memory. Note that return puts a blank ("a return character")
20803 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20804 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20805 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20806 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20807 # I have been unable to get tabs set in all 96 lines - it always leaves at
20808 # least one line with no tabs in it, and once you tab through that line,
20809 # it completely weirds out.
20810 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20813 cols#80, lines#24, lm#96,
20814 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20815 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20816 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20817 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20818 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20822 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20823 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20824 gsi|mystery gsi terminal,
20827 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20829 aj830|aj832|aj|anderson jacobson,
20831 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20833 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20834 aj510|Anderson-Jacobson model 510,
20837 clear=^L, cub1=^H, cuf1=\EX,
20838 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20839 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20840 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20841 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20842 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20844 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20845 # This is incomplete, but it's a start.
20846 nec5520|nec|spinwriter|nec 5520,
20849 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20850 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20852 qume5|qume|Qume Sprint 5,
20855 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20856 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20857 # I suspect the xerox 1720 is the same as the diablo 1620.
20858 xerox1720|x1720|x1750|xerox 1720,
20861 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20864 #### Miscellaneous obsolete terminals, manufacturers unknown
20866 # If you have any information about these (like, a manufacturer's name,
20867 # and a date on the serial-number plate) please send it!
20869 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20872 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20873 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20876 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20877 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20878 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20879 cops10|cops|cops-10|cops 10,
20882 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20883 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20884 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20886 # (d132: removed duplicate :ic=\E5:,
20887 # merged in capabilities from a BRL entry -- esr)
20888 d132|datagraphix|datagraphix 132a,
20891 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20892 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20893 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20894 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20895 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20896 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20897 # mode (which is what this entry looks like) and several other lesser-known
20900 OTbs, am, da, db, msgr, xhp,
20901 cols#80, it#8, lines#24,
20902 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20903 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20904 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20905 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20906 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20907 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20908 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20909 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20910 digilog|digilog 333,
20913 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20915 # The DWK was a terminal manufactured in the Soviet Union c.1986
20916 dwk|dwk-vt|dwk terminal,
20918 cols#80, it#8, lines#24,
20919 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20920 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20921 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20922 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20923 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20924 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20925 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20926 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20927 sgr0=\EX, smacs=\EF, smso=\ET,
20928 env230|envision230|envision 230 graphics terminal,
20930 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
20931 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20932 sgr0=\E[0m$<2>, smacs@, use=vt100,
20933 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20934 # coupler attached, the whole rig fitting in a suitcase and more or less
20935 # portable. Hot stuff for c.1977 :-) -- esr
20936 ep48|ep4080|execuport 4080,
20939 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20940 ep40|ep4000|execuport 4000,
20941 cols#136, use=ep4080,
20942 # Adam Thompson <athompso@pangea.ca> tells us:
20943 # Informer series - these are all portable units, resembling older
20944 # automatic bread-baking machines. The terminal looks like a `clamshell'
20945 # design, but isn't. The structure is similar to the Direct terminals,
20946 # but only half the width. The entire unit is only about 10" wide.
20947 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20948 # keyboard. All the keys are crammed together, much like some laptop
20949 # PCs today, but perhaps less well organized...all these units have a
20950 # bewildering array of plugs on the back, including a built-in modem.
20951 # The 305 was a color version of the 304; the 306 and 307 were mono and
20952 # color terminals built for IBM bisync protocols.
20953 # From: Paul Leondis <unllab@amber.berkeley.edu>
20954 ifmr|Informer D304,
20957 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20958 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20959 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20961 # Entry largely based on wy60 and has the features of wy60ak.
20962 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20963 am, bw, hs, km, mir, msgr, ul, xon,
20964 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20965 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20966 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20967 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20968 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20969 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20970 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20972 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20973 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20974 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20975 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20976 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20977 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20978 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20979 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20980 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20981 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20982 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20983 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20984 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20985 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20986 rs3=\EwG\Ee($<150>,
20987 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20988 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20989 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20990 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20991 uc=\EG8\EG0, use=adm+sgr,
20992 teletec|Teletec Datascreen,
20995 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20997 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20998 # This description is for the LANPAR Technologies VISION 3220
20999 # terminal from 1984/85. The function key definitions k0-k5 represent the
21000 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
21001 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
21003 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
21004 # I had a couple of scopes (3221) like this once where I used to work, around
21005 # the 1987 time frame if memory serves me correctly. These scopes were made
21006 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
21007 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
21008 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
21009 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
21010 # (3221) cost about $1500 each, and one was always broken -- had to be sent
21011 # back to the shop for repairs.
21012 # The only real advantage these scopes had over the VT-240's were:
21013 # 1) They were faster in the Regis display, or at least the ones I did
21014 # 2) They had a handy debugging feature where you could split-screen the
21015 # scope, the graphics would appear on the top, and the REGIS commands would
21016 # appear on the bottom. I don't remember the VT-240s being able to do that.
21017 # I would swear that LANPAR Technologies was in MA someplace, but since I
21018 # don't work at the same place anymore, and those terminals and manuals were
21019 # long since junked, I cannot be any more sure than that.
21021 # (v3220: removed obsolete ":kn#10:",
21022 # I added <rmam>/<smam> based on the init string -- esr)
21023 v3220|LANPAR Vision II model 3220/3221/3222,
21024 OTbs, am, mir, xenl,
21025 cols#80, it#8, lines#24,
21026 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
21027 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
21028 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
21029 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
21030 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
21031 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
21032 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
21033 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21034 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
21035 ######## ICH/ICH1 VERSUS RMIR/SMIR
21037 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
21038 # are present; the symptom is doubled characters in an update using insert.
21039 # These applications are technically correct; in both 4.3BSD termcap and
21040 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
21041 # unless the terminal needs both. To my knowledge, no terminal still in this
21042 # file requires both other than the very obsolete dm2500.
21044 # For ncurses-based applications this is not a problem, as ncurses uses
21045 # one or the other as appropriate but never mixes the two. Therefore we
21046 # have not corrected entries like `linux' and `xterm' that specify both.
21047 # If you see doubled characters from these, use the linux-nic and xterm-nic
21048 # entries that suppress ich/ich1. And upgrade to ncurses!
21051 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
21053 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
21054 # ECMA-48 standards are said to be almost identical, but are not the same
21055 # as X3.64 (though for practical purposes they are close supersets of it).
21057 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
21058 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
21059 # Coded Character Sets"), include your snail-mail address, and you should
21060 # receive the document in due course. Don't expect an email acknowledgement.
21062 # Related standards include "X3.4-1977: American National Standard Code for
21063 # Information Interchange" (the ASCII standard) and "X3.41.1974:
21064 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
21065 # American National Standard for Information Interchange." I believe (but
21066 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
21070 #### VT100/ANSI/ECMA-48
21072 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
21073 # and ECMA-48 Control Functions for Coded Character Sets.
21075 # Much of the content of this comment is adapted from a table prepared by
21076 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
21077 # discussion of some terminfo-related issues, and updates to capture ECMA-48
21078 # have been added. Control functions described in ECMA-48 only are tagged
21079 # with * after their names.
21081 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
21082 # sequences. In the main table, \E stands for an escape (\033) character,
21083 # SPC for space. Pn stands for a single numeric parameter to be inserted
21084 # in decimal ASCII. Ps stands for a list of such parameters separated by
21085 # semicolons. Parameter meanings for most parametrized sequences are
21086 # decribed in the notes.
21088 # Sequence Sequence Parameter or
21089 # Mnemonic Name Sequence Value Mode terminfo
21090 # -----------------------------------------------------------------------------
21091 # APC Applicatn Program Command \E _ - Delim -
21092 # BEL Bell * ^G - - bel
21093 # BPH Break Permitted Here * \E B - * -
21094 # BS Backpace * ^H - EF -
21095 # CAN Cancel * ^X - - - (A)
21096 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
21097 # CCH Cancel Previous Character \E T - - -
21098 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
21099 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
21100 # CMD Coding Method Delimiter * \E
21101 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
21102 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
21103 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
21104 # CSI Control Sequence Intro \E [ - Intro -
21105 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
21106 # CUB Cursor Backward \E [ Pn D 1 eF cub
21107 # CUD Cursor Down \E [ Pn B 1 eF cud
21108 # CUF Cursor Forward \E [ Pn C 1 eF cuf
21109 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
21110 # CUU Cursor Up \E [ Pn A 1 eF cuu
21111 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
21112 # DA Device Attributes \E [ Pn c 0 - -
21113 # DAQ Define Area Qualification \E [ Ps o 0 - -
21114 # DCH Delete Character \E [ Pn P 1 eF dch
21115 # DCS Device Control String \E P - Delim -
21116 # DL Delete Line \E [ Pn M 1 eF dl
21117 # DLE Data Link Escape * ^P - - -
21118 # DMI Disable Manual Input \E \ - Fs -
21119 # DSR Device Status Report \E [ Ps n 0 - - (I)
21120 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
21121 # EA Erase in Area \E [ Ps O 0 eF - (J)
21122 # ECH Erase Character \E [ Pn X 1 eF ech
21123 # ED Erase in Display \E [ Ps J 0 eF ed (J)
21124 # EF Erase in Field \E [ Ps N 0 eF -
21125 # EL Erase in Line \E [ Ps K 0 eF el (J)
21126 # EM End of Medium * ^Y - - -
21127 # EMI Enable Manual Input \E b Fs -
21128 # ENQ Enquire ^E - - -
21129 # EOT End Of Transmission ^D - * -
21130 # EPA End of Protected Area \E W - - - (K)
21131 # ESA End of Selected Area \E G - - -
21132 # ESC Escape ^[ - - -
21133 # ETB End Transmission Block ^W - - -
21134 # ETX End of Text ^C - - -
21135 # FF Form Feed ^L - - -
21136 # FNK Function Key * \E [ Pn SPC W - - -
21137 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
21138 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
21139 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
21140 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
21141 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
21142 # HPB Char Position Backward \E [ j 1 FE -
21143 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
21144 # HT Horizontal Tab * ^I - FE - (N)
21145 # HTJ Horz Tab w/Justification \E I - FE -
21146 # HTS Horizontal Tab Set \E H - FE hts
21147 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
21148 # ICH Insert Character \E [ Pn @ 1 eF ich
21149 # IDCS ID Device Control String \E [ SPC O - * -
21150 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
21151 # IL Insert Line \E [ Pn L 1 eF il
21152 # IND Index \E D - FE -
21153 # INT Interrupt \E a - Fs -
21154 # JFY Justify \E [ Ps SPC F 0 FE -
21155 # IS1 Info Separator #1 * ^_ - * -
21156 # IS2 Info Separator #1 * ^^ - * -
21157 # IS3 Info Separator #1 * ^] - * -
21158 # IS4 Info Separator #1 * ^\ - * -
21159 # LF Line Feed ^J - - -
21160 # LS1R Locking Shift Right 1 * \E ~ - - -
21161 # LS2 Locking Shift 2 * \E n - - -
21162 # LS2R Locking Shift Right 2 * \E } - - -
21163 # LS3 Locking Shift 3 * \E o - - -
21164 # LS3R Locking Shift Right 3 * \E | - - -
21165 # MC Media Copy \E [ Ps i 0 - - (S)
21166 # MW Message Waiting \E U - - -
21167 # NAK Negative Acknowledge * ^U - * -
21168 # NBH No Break Here * \E C - - -
21169 # NEL Next Line \E E - FE nel (D)
21170 # NP Next Page \E [ Pn U 1 eF -
21171 # NUL Null * ^@ - - -
21172 # OSC Operating System Command \E ] - Delim -
21173 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
21174 # PFS Page Format Selection * \E Pn SPC J 0 - -
21175 # PLD Partial Line Down \E K - FE - (T)
21176 # PLU Partial Line Up \E L - FE - (U)
21177 # PM Privacy Message \E ^ - Delim -
21178 # PP Preceding Page \E [ Pn V 1 eF -
21179 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
21180 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
21181 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
21182 # PTX Parallel Texts * \E [ \ - - -
21183 # PU1 Private Use 1 \E Q - - -
21184 # PU2 Private Use 2 \E R - - -
21185 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
21186 # REP Repeat Char or Control \E [ Pn b 1 - rep
21187 # RI Reverse Index \E M - FE - (V)
21188 # RIS Reset to Initial State \E c - Fs -
21189 # RM Reset Mode * \E [ Ps l - - - (W)
21190 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
21191 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
21192 # SCI Single-Char Introducer \E Z - - -
21193 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
21194 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
21195 # SD Scroll Down \E [ Pn T 1 eF rin
21196 # SDS Start Directed String * \E [ Pn ] 1 - -
21197 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
21198 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
21199 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
21200 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
21201 # SI Shift In ^O - - - (P)
21202 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
21203 # SL Scroll Left \E [ Pn SPC @ 1 eF -
21204 # SLH Set Line Home * \E [ Pn SPC U - - -
21205 # SLL Set Line Limit * \E [ Pn SPC V - - -
21206 # SLS Set Line Spacing * \E [ Pn SPC h - - -
21207 # SM Select Mode \E [ Ps h none - - (W)
21208 # SO Shift Out ^N - - - (Q)
21209 # SOH Start Of Heading * ^A - - -
21210 # SOS Start of String * \E X - - -
21211 # SPA Start of Protected Area \E V - - - (Z)
21212 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
21213 # SPH Set Page Home * \E [ Ps SPC G - - -
21214 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
21215 # SPL Set Page Limit * \E [ Ps SPC j - - -
21216 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
21217 # SR Scroll Right \E [ Pn SPC A 1 eF -
21218 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
21219 # SRS Start Reversed String * \E [ Ps [ 0 - -
21220 # SSA Start of Selected Area \E F - - -
21221 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
21222 # SSW Set Space Width * \E [ Pn SPC [ none - -
21223 # SS2 Single Shift 2 (G2 set) \E N - Intro -
21224 # SS3 Single Shift 3 (G3 set) \E O - Intro -
21225 # ST String Terminator \E \ - Delim -
21226 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
21227 # STS Set Transmit State \E S - - -
21228 # STX Start pf Text * ^B - - -
21229 # SU Scroll Up \E [ Pn S 1 eF indn
21230 # SUB Substitute * ^Z - - -
21231 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
21232 # SYN Synchronous Idle * ^F - - -
21233 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
21234 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
21235 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
21236 # TBC Tab Clear \E [ Ps g 0 FE tbc
21237 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
21238 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
21239 # TSS Thin Space Specification \E [ Pn SC E none FE -
21240 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
21241 # VPB Line Position Backward * \E [ Pn k 1 FE -
21242 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
21243 # VT Vertical Tabulation * ^K - FE -
21244 # VTS Vertical Tabulation Set \E J - FE -
21246 # ---------------------------------------------------------------------------
21250 # Some control characters are listed in the ECMA-48 standard without
21251 # being assigned functions relevant to terminal control there (they
21252 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
21253 # here anyway for completeness.
21255 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
21257 # (B) There seems to be some confusion abroad between CHA and HPA. Most
21258 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
21259 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
21260 # preserved the CHA abbreviation.
21262 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
21263 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
21264 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
21265 # CHT abbreviation.
21267 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
21269 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
21272 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
21273 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
21274 # 5 = clear all char tabs, 6 = clear all line tabs.
21276 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
21277 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
21278 # Position Absolute" but retains the HVP abbreviation.
21280 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
21283 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
21284 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
21285 # DSR, 6 = request CPR response.
21287 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
21288 # 1 = clear from beginning, 2 = clear.
21290 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
21292 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
21294 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
21295 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
21296 # Position Relative" but retains the HPR abbreviation.
21298 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
21301 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
21302 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
21303 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
21304 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
21305 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
21306 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
21307 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
21308 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
21309 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
21310 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
21311 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
21312 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
21313 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
21314 # 61-65 = variable highlights for ideograms.
21316 # (P) SI is also called LSO, Locking Shift Zero.
21318 # (Q) SI is also called LS1, Locking Shift One.
21320 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
21321 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
21322 # Absolute' but retains the VPA abbreviation.
21324 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
21325 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
21326 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
21327 # start relay to primary aux device, 6 = stop relay to secondary aux device,
21328 # 7 = start relay to secondary aux device.
21330 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
21333 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
21336 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
21338 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
21339 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
21340 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
21341 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
21342 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
21343 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
21344 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
21345 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
21346 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
21347 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
21348 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
21349 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
21350 # from ECMA-48's 5th edition but are listed here for reference.
21352 # (X) Select Alternate Presentation Variants is used only for non-Latin
21355 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
21357 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
21360 # ---------------------------------------------------------------------------
21364 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
21365 # X3.64 Control Sequence Introducer is the two characters "Escape ["
21367 # Delim a Delimiter
21369 # x/y identifies a character by position in the ASCII table (column/row)
21371 # eF editor function (see explanation)
21373 # FE format effector (see explanation)
21375 # F is a Final character in
21376 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
21377 # a control sequence (F from 4/0 to 7/14)
21379 # Gs is a graphic character appearing in strings (Gs ranges from
21380 # 2/0 to 7/14) in the ASCII table
21382 # Ce is a control represented as a single bit combination in the C1 set
21383 # of controls in an 8-bit character set
21385 # C0 the familiar set of 7-bit ASCII control characters
21387 # C1 roughly, the set of control chars available only in 8-bit systems.
21388 # This is too complicated to explain fully here, so read Jim Fleming's
21389 # article in the February 1983 BYTE, especially pages 214 through 224.
21391 # Fe is a Final character of a 2-character Escape sequence that has an
21392 # equivalent representation in an 8-bit environment as a Ce-type
21393 # (Fe ranges from 4/0 to 5/15)
21395 # Fs is a Final character of a 2-character Escape sequence that is
21396 # standardized internationally with identical representation in 7-bit
21397 # and 8-bit environments and is independent of the currently
21398 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21400 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21403 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21406 # Pn is a numeric parameter in a control sequence, a string of zero or
21407 # more characters ranging from 3/0 to 3/9 in the ASCII table
21409 # Ps is a variable number of selective parameters in a control sequence
21410 # with each selective parameter separated from the other by the code
21411 # 3/11 (which usually represents a semicolon); Ps ranges from
21412 # 3/0 to 3/9 and includes 3/11
21414 # * Not relevant to terminal control, listed for completeness only.
21416 # Format Effectors versus Editor Functions
21418 # A format effector specifies how following output is to be displayed.
21419 # An editor function allows you to modify the display. Informally
21420 # format effectors may be destructive; format effectors should not be.
21422 # For instance, a format effector that moves the "active position" (the
21423 # cursor or equivalent) one space to the left would be useful when you want to
21424 # create an overstrike, a compound character made of two standard characters
21425 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21426 # format effector, so you can do this. But many systems use it in a
21427 # nonstandard fashion, as an editor function, deleting the character to the
21428 # left of the cursor and moving the cursor left. When Control-H is assumed to
21429 # be an editor function, you cannot predict whether its use will create an
21430 # overstrike unless you also know whether the output device is in an "insert
21431 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21432 # its effect can always be predicted. The familiar characters carriage
21433 # return, linefeed, formfeed, etc., are defined as format effectors.
21435 # NOTES ON THE DEC VT100 IMPLEMENTATION
21437 # Control sequences implemented in the VT100 are as follows:
21439 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21440 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21442 # plus several private DEC commands.
21444 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21446 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21447 # Erase from beginning of line to cursor Esc [ 1 K
21448 # Erase line containing cursor Esc [ 2 K
21449 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21450 # Erase from beginning of screen to cursor Esc [ 1 J
21451 # Erase entire screen Esc [ 2 J
21453 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21454 # Esc [ 2 J, but this is wrong; the default is 0.
21456 # The VT100 responds to receiving the DA (Device Attributes) control
21458 # Esc [ c (or Esc [ 0 c)
21460 # by transmitting the sequence
21464 # where Ps is a character that describes installed options.
21466 # The VT100's cursor location can be read with the DSR (Device Status
21471 # The VT100 reports by transmitting the CPR sequence
21475 # where Pl is the line number and Pc is the column number (in decimal).
21477 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21481 # Here is a description of the color and attribute controls supported in the
21482 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21483 # terminal emulators for Intel boxes obey these. They are a proper subset
21484 # of the ECMA-48 escapes.
21486 # 0 all attributes off
21487 # 1 foreground bright
21489 # 5 blink on/background bright (not reliable with brown)
21491 # 8 set blank (non-display)
21492 # 10 set primary font
21493 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21494 # 12 set second alternate font (on PCs, display IBM high-half chars)
21496 # Color attribute sets
21497 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21498 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21499 # Bright black becomes gray. Bright brown becomes yellow,
21500 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21502 # * If the 5 attribute is on and you set a background color (40-47) it is
21503 # supposed to enable bright background.
21505 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21506 # when you try to set a "bright brown" (yellow) background with attribute
21507 # 5 (you get a blinking yellow foreground instead). A few displays
21508 # (including the System V console) support an attribute 6 that undoes this
21509 # braindamage (this is required by iBCS2).
21511 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21512 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21515 #### Intel Binary Compatibility Standard
21517 # For comparison, here are the capabilities implied by the Intel Binary
21518 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21519 # These recommendations are optional. IBCS2 allows the leading escape to
21520 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21521 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21522 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21523 # terminfo entry are followed with the corresponding capability in parens:
21525 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21526 # CSI 2h lock keyboard
21527 # CSI 2i send screen as input
21528 # CSI 2l unlock keyboard
21529 # CSI 6m enable background color intensity
21530 # CSI <0-2>c reserved
21531 # CSI <0-59>m select graphic rendition
21532 # CSI <n>;<m>H (cup) cursor to line n and column m
21533 # CSI <n>;<m>f cursor to line n and column m
21534 # CSI <n>@ (ich) insert characters
21535 # CSI <n>A (cuu) cursor up n lines
21536 # CSI <n>B (cud) cursor down n lines
21537 # CSI <n>C (cuu) cursor right n characters
21538 # CSI <n>D (cud) cursor left n characters
21539 # CSI <n>E cursor down n lines and in first column
21540 # CSI <n>F cursor up n lines and in first column
21541 # CSI <n>G (hpa) position cursor at column n-1
21542 # CSI <n>J (ed) erase in display
21543 # CSI <n>K (el) erase in line
21544 # CSI <n>L (il) insert line(s)
21545 # CSI <n>P (dch) delete characters
21546 # CSI <n>S (indn) scroll up n lines
21547 # CSI <n>T (rin) scroll down n lines
21548 # CSI <n>X (ech) erase characters
21549 # CSI <n>Z (cbt) back up n tab stops
21550 # CSI <n>` cursor to column n on line
21551 # CSI <n>a (cuu) cursor right n characters
21552 # CSI <n>d (vpa) cursor to line n
21553 # CSI <n>e cursor down n lines and in first column
21554 # CSI <n>g (cbt) clear all tabs
21555 # CSI <n>z make virtual terminal n active
21556 # CSI ?7h (smam) turn automargin on
21557 # CSI ?7l (rmam) turn automargin off
21558 # CSI s save cursor position
21559 # CSI u restore cursor position to saved value
21560 # CSI =<c>A set overscan color
21561 # CSI =<c>F set normal foreground color
21562 # CSI =<c>G set normal background color
21563 # CSI =<c>H set reverse foreground color
21564 # CSI =<c>I set reverse foreground color
21565 # CSI =<c>J set graphic foreground color
21566 # CSI =<c>K set graphic foreground color
21567 # CSI =<n>g (dispc) display n from alternate graphics character set
21568 # CSI =<p>;<d>B set bell parameters
21569 # CSI =<s>;<e>C set cursor parameters
21570 # CSI =<x>D enable/disable intensity of background color
21571 # CSI =<x>E set/clear blink vs. bold background
21572 # CSI 7 (sc) (sc) save cursor position
21573 # CSI 8 (rc) (rc) restore cursor position to saved value
21574 # CSI H (hts) (hts) set tab stop
21575 # CSI Q<n><string> define function key string
21576 # (string must begin and end with delimiter char)
21577 # CSI c (clear) clear screen
21579 # The lack of any specification for attributes in SGR (among other things)
21580 # makes this a wretchedly weak standard. The table above is literally
21581 # everything iBSC2 has to say about terminal escape sequences; there is
21582 # no further discussion of their meaning or how to set the parameters
21583 # in these sequences at all.
21586 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21588 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21589 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21590 # with the extension names chosen for compatibility with the termcap names
21591 # assigned in System V terminfo. There are some variant extension sets out
21592 # there. We try to describe them here.
21594 #### XENIX extensions:
21596 # The XENIX extensions include a set of function-key capabilities as follows:
21598 # code XENIX variable name terminfo name name clashes?
21599 # ---- ------------------- ------------- -----------------------
21601 # CR key_char_right
21602 # CW key_change_window create_window
21604 # HM key_home khome
21606 # LD key_delete_line kdl1
21607 # LF key_linefeed label_off
21608 # NU key_next_unlocked_cell
21609 # PD key_page_down knp
21611 # PN start_print mc5
21613 # PS stop_print mc4
21614 # PU key_page_up kpp pulse
21615 # RC key_recalc remove_clock
21616 # RF key_toggle_ref req_for_input
21617 # RT key_return kent
21618 # UP key_up_arrow kcuu1 parm_up_cursor
21620 # WR key_word_right
21622 # The XENIX extensions also include the following character-set and highlight
21625 # XENIX terminfo function
21626 # ----- -------- ------------------------------
21627 # GS smacs start alternate character set
21628 # GE rmacs end alternate character set
21629 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21630 # bo blink begin blink (not used in /etc/termcap)
21631 # be end blink (not used in /etc/termcap)
21632 # bb blink glitch (not used in /etc/termcap)
21633 # it dim begin dim (not used in /etc/termcap)
21634 # ie end dim (not used in /etc/termcap)
21635 # ig dim glitch (not used in /etc/termcap)
21637 # Finally, XENIX also used the following forms-drawing capabilities:
21639 # single double type ASCII approximation
21640 # ------ ------ ------------- -------------------
21641 # GV Gv vertical line |
21642 # GH Gv horizontal line - _
21643 # G1 G5 top right corner _ |
21644 # G2 G6 top left corner |
21645 # G3 G7 bottom left corner |_
21646 # G4 G8 bottom right corner _|
21647 # GD Gd down-tick character T
21648 # GL Gl left-tick character -|
21649 # GR Gr right-tick character |-
21650 # GC Gc middle intersection -|-
21651 # GU Gu up-tick character _|_
21653 # These were invented to take advantage of the IBM PC ROM character set. One
21654 # can compose an acsc string from the single-width characters as follows
21655 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21656 # When translating a termcap file, ncurses tic will do this automatically.
21657 # The double forms characters don't fit the SVr4 terminfo model.
21659 #### AT&T Extensions:
21661 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21662 # nonstandard capabilities. Its signature is the KM capability, used to name
21663 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21664 # set. Comments in the original, and a little cross-checking with other AT&T
21665 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21666 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21667 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21668 # cursor invisible), and CV=:ve: (make cursor normal).
21672 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21673 # have the System V capabilities up to SVr1 level. After that, it supports
21674 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21675 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21676 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21677 # HP binary format incompatible with SVr4's.
21679 #### IBM Extensions
21681 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21682 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21683 # capabilities following prtr_non with the following special capabilties:
21684 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21685 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21686 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21687 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21688 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21689 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21690 # correspond to acsc chars, here is the mapping:
21692 # box1[0] = ACS_ULCORNER
21693 # box1[1] = ACS_HLINE
21694 # box1[2] = ACS_URCORNER
21695 # box1[3] = ACS_VLINE
21696 # box1[4] = ACS_LRCORNER
21697 # box1[5] = ACS_LLCORNER
21698 # box1[6] = ACS_TTEE
21699 # box1[7] = ACS_RTEE
21700 # box1[8] = ACS_BTEE
21701 # box1[9] = ACS_LTEE
21702 # box1[10] = ACS_PLUS
21704 # The box2 characters are the double-line versions of these forms graphics.
21705 # The AIX binary terminfo format is incompatible with SVr4's.
21707 #### Iris console extensions:
21709 # HS is half-intensity start; HE is half-intensity end
21710 # CT is color terminal type (for Curses & rogue)
21711 # CP is color change escape sequence
21712 # CZ are color names (for Curses & rogue)
21714 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21716 #### TC Extensions:
21718 # There is a set of extended termcaps associated with something
21719 # called the "Terminal Control" or TC package created by MainStream Systems,
21720 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21721 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21722 # that flags color terminals.
21724 ######## NCURSES USER-DEFINABLE CAPABILITIES
21726 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21727 # infocmp to manipulate user-definable capabilities. Those that are intended
21728 # for use in either terminfo or termcap use 2-character names. Extended
21729 # function keys do not use 2-character names, and are available only with
21732 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21733 # supports this extension; termcap libraries can as noted above make limited
21734 # use of the feature.
21736 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21739 #### SCREEN Extensions:
21741 # The screen program uses the termcap interface. It recognizes a few useful
21742 # nonstandard capabilities. Those are used in this file.
21744 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21746 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21747 # E0 (str) Switch charset 'G0' back to standard charset.
21748 # S0 (str) Switch charset 'G0' to the specified charset.
21749 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
21752 # AX is relatively straightforward; it is interpreted by ncurses to say that
21753 # SGR 39/49 reset the terminal's foreground and background colors to their
21756 # XT is harder, since screen's manpage does not give more details. For that,
21757 # we must read screen's source-code. When XT is set, screen assumes
21759 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
21760 # screen may also set the terminal's name, which is (for xterm) distinct
21761 # from the icon name.
21762 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
21763 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
21764 # this is an rxvt feature.
21765 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
21766 # These are from xterm, although xterm accepts mouse codes that may not be
21767 # recognized by screen, e.g., 1005, 1006.
21768 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
21769 # sequence. However, because screen uses only termcap, the values returned
21770 # by Af/Ab are not usable because they rely on expressions that termcap
21771 # does not support. Therefore, screen uses a hardcoded string to work
21772 # around the limitation.
21773 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
21775 # The other ISO-2022 features are rarely used, but provided here to make
21776 # screen's termcap features available.
21778 #### XTERM Extensions:
21780 # Most of the xterm extensions are for function-keys. Since patch #94 (in
21781 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
21782 # additional function-key strings. Some other developers copied the feature,
21783 # though they did not follow xterm's lead in patch #167 (in 2002), to make
21784 # these key definitions less ambiguous.
21786 # A few terminals provide similar functionality (sending distinct keys when
21787 # a modifier is used), including rxvt.
21789 # These are the extended keys defined in this file:
21791 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
21792 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
21793 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
21794 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
21796 # Here are the other xterm-related extensions which are used in this file:
21798 # Cr is a string capability which resets the cursor color
21799 # Cs is a string capability which sets the cursor color to a given value.
21800 # The single string parameter is the color name/number, according to the
21802 # Ms modifies the selection/clipboard. Its parameters are
21803 # p1 = the storage unit (clipboard, selection or cut buffer)
21804 # p2 = the base64-encoded clipboard content.
21805 # Se resets the cursor style to the terminal power-on default.
21806 # Ss is a string capability with one numeric parameter. It is used to set the
21807 # cursor style as described by the DECSCUSR function to a block or
21809 # TS is a string capability which acts like "tsl", but uses no parameter and
21810 # goes to the first column of the "status line".
21811 # XM is a string capability which overrides ncurses's built-in string which
21812 # enables xterm mouse mode.
21814 #### Miscellaneous extensions:
21816 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
21817 # This was implemented for the Hurd.
21818 # E3 clears the terminal's scrollback buffer. This was implemented in the
21819 # Linux 3.0 kernel as a security feature. It matches a feature which was
21820 # added in xterm patch #107.
21821 # U8 is a numeric capability which denotes a terminal emulator which does not
21822 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
21823 # value to enable it.
21825 ######## CHANGE HISTORY
21827 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21828 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21829 # maintained by Eric S. Raymond as part of the ncurses project.
21831 # This file contains all the capability information present in John Kunze's
21832 # last version of the termcap master file, except as noted in the change
21833 # comments at end of file. Some information about very ancient obsolete
21834 # capabilities has been moved to comments. Some all-numeric names of older
21835 # terminals have been retired.
21837 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21838 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21839 # used by BSD curses.
21841 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21842 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21843 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21844 # making perfectly synchronized mistakes which I then failed to catch by
21845 # eyeball, the translation was correct and perfectly information-preserving.
21847 # Major version number bumps correspond to major version changes in ncurses.
21849 # Here is a log of the changes since then:
21851 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21852 # * First terminfo master translated from 8.3.
21853 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21854 # * Replaced Wyse entries with updated entries supplied by vendor.
21856 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21857 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21858 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21859 # * Better XENIX keycap translation. Describe TC termcaps.
21860 # * Contact and history info supplied by Qume.
21861 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21862 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21863 # * Added information on X3.64 and VT100 standard escape sequences.
21864 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21865 # * Added a correct X11R6 xterm entry.
21866 # * Fixed terminfo translations of padding.
21867 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21868 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21869 # * Added u6/u7/u8/u9 capabilities.
21870 # * Added PCVT entry.
21871 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21872 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21873 # to use reverse-video standout so Emacs will look right.
21874 # * Added el1 capability to ansi.
21875 # * Added smacs/rmacs to ansi.sys.
21877 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21878 # * New mt70 entry.
21879 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21880 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21881 # smartvid & smarterm, ampex 175 & 219 & 232,
21882 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21883 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21884 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21885 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21886 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21887 # * Restored the old minimal-ansi entry, luna needs it.
21888 # * Fixed some incorrect ip and proportional-padding translations.
21889 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21890 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21891 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21892 # to force a particular height.
21893 # * Added beehive4 and reorganized other Harris entries.
21894 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21895 # * Merged in DEC's official entries for its terminals. The only old
21896 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21897 # * Replaced the translated BBN Bitgraph entries with purpose-built
21898 # ones from AT&T's SVr3.
21899 # * Replaced the AT&T entries with AT&T's official terminfos.
21900 # * Added teleray 16, vc415, cops10.
21901 # * Merged in many individual capabilities from SCO terminfo files.
21902 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21904 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21905 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21906 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21907 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21908 # simterm, citoh and variants.
21909 # * Replaced sol entry with sol1 and sol2.
21910 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21911 # terminfo entries.
21912 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21913 # and dg200 entries using caps from from SCO.
21914 # * Added the usual set of function-key mappings to ANSI entry.
21915 # * Corrected xterm's function-key capabilities.
21916 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21917 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21918 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21919 # * Fix in xterm entry, get the arrow keys right.
21920 # * Change some \0 escapes to \200.
21921 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21922 # * Added apple (Videx card), adm1a, oadm31.
21923 # * Fixed malformed ampex csr.
21924 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21925 # * Changed mandatory to advisory padding in many entries.
21926 # * Replaced HP entries up to hpsub with purpose-built ones.
21927 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21928 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21929 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21930 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21931 # more efficient (but the entries otherwise identical).
21932 # * Added dg211 from Shuford archive.
21933 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21934 # adm42-nl, pc52, gs6300, xerox820, uts30.
21935 # * Pull SCO's padding into vi200 entry.
21936 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21937 # entries merged in from SCO's descriptions.
21938 # * Fixed old-style prefix padding on zen50, h1500.
21939 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21940 # entry from SCO's description.
21941 # * Reorganized the special entries.
21942 # * Added lm#0 to cbunix and virtual entries.
21944 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21945 # * Restored cdc456tst.
21946 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21947 # * Added megatek, beacon, microkit.
21948 # * Freeze for ncurses-1.9 release.
21949 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21950 # * Added historical data for TAB.
21951 # * Comment fixes from David MacKenzie.
21952 # * Added the new BSDI pc3 entry.
21953 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21954 # * A change in the tic -C logic now ensures that all entries in
21955 # the termcap translation will fit in < 1024 bytes.
21956 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21957 # from GNU termcap file. This merges in all their local information.
21958 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21959 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21960 # * Added warnings about entries with long translations (restoring
21961 # all the GNU termcaps pushes a few over the edge).
21962 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21963 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21964 # number of long (> 1024) termcap translations back to 0.
21966 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21967 # * Added kf13-kf20 to Linux entry.
21968 # * Regularize Prime terminal names.
21969 # * Historical data on Synertek.
21970 # * Freeze for ncurses-1.9.1.
21971 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21972 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21973 # * Eliminate whitespace in short name fields, this tanks some scripts.
21974 # * Name field changes to shorten some long entries.
21975 # * Termcap translation now automatically generates empty rmir/smir
21976 # when ich1/ich is present (copes with an ancient vi bug).
21977 # * Added `screen' entries from FSF's screen-3.6.2.
21978 # * Added linux-nic and xterm-nic entries.
21979 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21980 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21981 # eliminating some special-case code in ncurses.
21983 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21984 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21985 # that captures everything unique from it.
21986 # * Added reorder script generator.
21987 # * Freeze for ncurses 1.9.2 release.
21988 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21989 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21990 # * Added Olaf Siebert's corrections for adm12.
21991 # * ansi-pc-color now includes the colors and pairs caps, so that
21992 # entries which use it will inherit them automatically.
21993 # * The linux entry can now recognize the center (keypad 5) key.
21994 # * Removed some junk that found its way into Linux acsc.
21996 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21997 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21998 # * xterm doesn't try to use application keypad mode any more.
21999 # * Freeze for ncurses-1.9.3 release.
22000 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
22001 # * Added corrected sun entry from vendor.
22002 # * Added csr capability to linux entry.
22003 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
22004 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
22005 # * Some commented-out caps in long entries come back in, my code
22006 # for computing string-table lengths had a bug in it.
22007 # * pcansi series modified to fit comm-program reality better.
22008 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
22009 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
22010 # * Correct some bad aliases in the pcansi series
22011 # * Added entry for QNX console.
22012 # * Clean up duplicate long names for use with 4.4 library.
22013 # * Change vt100 standout to be normal reverse vide, not bright reverse;
22014 # this makes the Emacs status line look better.
22015 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
22016 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
22017 # * Minor surgery, mostly on name strings, to shorten termcap version.
22019 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
22020 # * Added dec-vt100 for use with the EWAN emulator.
22021 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
22022 # * Freeze for 1.9.5 alpha release.
22023 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
22024 # * Changed xterm lines to 24, the X11R6 default.
22025 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
22026 # * Added 7 newly discovered, undocumented acsc characters to linux
22027 # entry (the pryz{|} characters).
22028 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
22029 # * Correct two typos in the xterm entries introduced in 9.9.1.
22030 # * I finally figured out how to translate ko capabilities. Done.
22031 # * Added tvi921 entries from Tim Theisen.
22032 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
22033 # * Removed mystery tec entry, it was neither interesting nor useful.
22034 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
22035 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
22036 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
22037 # by making them relative to use capabilities
22038 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
22039 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
22040 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
22042 # * Translate all home=\E[;H capabilities to home=\E[H, they're
22044 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
22045 # vt100 and ANSI-like terminals.
22046 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
22047 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
22048 # does this now, too.
22049 # * fviewpoint is gone, it duplicated screwpoint.
22050 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
22051 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
22052 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
22053 # The UW vi50 replaces the old one, which becomes vi50adm,
22054 # * No more embedded commas in name fields.
22056 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
22057 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
22058 # * Introduced klone+* entries for describing Intel-console behavior.
22059 # * Linux kbs is default-mapped to delete for some brain-dead reason.
22060 # * -nsl -> -ns. The -pp syntax is obsolete.
22061 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
22062 # * Make xterm entry do application-keypad mode again. I got complaints
22063 # that it was messing up someone's 3270 emulator.
22064 # * Added some longname fields in order to avoid warning messages from
22065 # older tic implementations.
22066 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
22067 # it! (This gives us pi, greater than, less than, and a few more.)
22068 # * Freeze for ncurses-1.9.6 release.
22069 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
22070 # * Add xon to a number of console entries, they're memory-mapped and
22071 # don't need padding.
22072 # * Correct the use dependencies in the ansi series.
22073 # * Hand-translate more XENIX capabilities.
22074 # * Added hpterm entry for HP's X terminal emulator.
22075 # * Added aixterm entries.
22076 # * Shortened four names so everything fits in 14 chars.
22078 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
22079 # * Added ibcs2 entry and info on iBCS2 standard.
22080 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
22081 # * We can handle the HP meml/memu capability now.
22082 # * Added smacs to klone entries, just as documentation.
22083 # * Carrected ansi.sys and cit-500 entries.
22084 # * Added z39, vt320-k311, v220c, and avatar entries.
22085 # * Make pcansi use the ansi.sys invis capability.
22086 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
22087 # tvi925, tvi950, dt80, ncr7900i, h19.
22088 # * X3.64 has been withdrawn, change some references.
22089 # * Removed function keys from ansi-m entry.
22090 # * Corrected ansi.sys entry.
22091 # * Freeze for ncurses-1.9.7 release.
22092 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
22093 # * Added rmam/smam capabilities to many entries based on init strings.
22094 # * Added correct hpa/vpa to linux.
22095 # * Reduced several entries relative to vt52.
22096 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
22097 # * Exiled some utterly unidentifiable custom and homebrew types to the
22098 # UFO file; also, obsolete small-screen hardware; also, entries which
22099 # look flat-out incorrect, garbled, or redundant. These include the
22100 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
22101 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
22102 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
22103 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
22104 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
22105 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
22106 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
22107 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
22108 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
22109 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
22110 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
22111 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
22112 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
22113 # * Corrected pcvt25h as suggested by Brian C. Grayson
22114 # <bgrayson@pine.ece.utexas.edu>.
22115 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
22116 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
22117 # * Added kent=\EOM to xterm entry.
22119 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
22120 # * Corrected gigi entry.
22121 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
22122 # bad hpa/vpa capabilities.
22123 # * Corrected flash strings to have a uniform delay of .2 sec. No
22124 # more speed-dependent NUL-padding!
22125 # * terminfo capabilities in comments bracketed with <>.
22126 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
22127 # * Replaced pcvt with the 3.31 pcvt entries.
22128 # * Freeze for 1.9.7a.
22129 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
22130 # * Added emu entry from the X11R6 contrib tape sources.
22132 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
22133 # * Improved iris-ansi and sun entries.
22134 # * More flash string improvements.
22135 # * Corrected wy160 & wy160 as suggested by Robert Dunn
22136 # * Added dim to at386.
22137 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
22138 # he's ready to start using the termcap generated from this one.
22139 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
22140 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
22141 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
22142 # att610, att620, att630,
22143 # * Changed hazeltine name prefix from h to hz.
22144 # * Sent t500 to the UFI file.
22145 # * I think we've sucked all the juice out of BSDI's termcap file now.
22146 # * Freeze for ncurses 1.9.8 release
22147 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
22148 # * Unfreeze, linux kbs needed to be fixed.
22149 # * Tim Theisen pinned down a bug in the DMD firmware.
22150 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
22151 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
22152 # (The broken ones had been shadowed by sgr.)
22153 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
22154 # * Added documentation on ECMA-48 standard.
22155 # * New Amiga entry.
22156 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
22157 # * More ECMA-48 stuff
22158 # * Corrected typo in minix entry, added pc-minix.
22159 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
22160 # * Added rxvt entry.
22161 # * Added 1.3.x color-change capabilities to linux entry.
22162 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
22163 # * Corrected rxvt entry khome/kend.
22164 # * Corrected linux color change capabilities.
22165 # * NeXT entries from Dave Wetzel.
22166 # * Cleaned up if and rf file names (all in /usr/share now).
22167 # * Changed linux op capability to avoid screwing up a background color
22168 # pair set by setterm.
22169 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
22170 # * Added xterm-sun.
22171 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
22174 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
22175 # * Another sweep through the Shuford archive looking for new info.
22176 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
22177 # * Added st52 from Per Persson.
22178 # * Added eterm from the GNU Emacs 19.30 distribution.
22179 # * Freeze for 1.9.9.
22180 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
22181 # * FreeBSD console entries from Andrew Chernov.
22182 # * Removed duplicate Atari st52 name.
22183 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
22184 # * xterm doesn't actually have ACS_BLOCK.
22185 # * Change klone+color setf/setb to simpler forms that can be
22186 # translated into termcap.
22188 # * Removed mechanically-generated junk capabilities from cons* entries.
22189 # * Added color support to bsdos.
22190 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
22191 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
22192 # * Created ecma+color, linux can use it. Also added ech to linux.
22193 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
22194 # * Add descriptions to FreeBSD console entries. Also shorten
22195 # some aliases to <= 14 chars for portability.
22196 # * Added x68k console
22197 # * Added OTbs to several VT-series entries.
22198 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
22199 # * screen entry update for 3.7.1 from Michael Alan Dorman.
22200 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
22201 # * kterm correction due to Kenji Rikitake.
22202 # * ACS correction in vt320-kll due to Phillippe De Muyter.
22203 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
22204 # * Sun console entry correction from J.T. Conklin.
22205 # * Changed all DEC VT300 and up terminals to use VT300 tab set
22206 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
22207 # * Added smul to linux entry (we never noticed it was missing
22208 # because of sgr!).
22209 # * Added rmln to hp+labels (deduced from other HP entries).
22210 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
22211 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
22212 # * Corrected vt220 acsc.
22213 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
22214 # this corresponds to reality and helps prevent some tic warnings.
22215 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
22216 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
22217 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
22218 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
22219 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
22220 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
22221 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
22222 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
22223 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
22224 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
22225 # ifmr, v3220, wy100q, tandem653, ibmaed.
22226 # * Added DWK terminal description.
22227 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
22228 # * Many entries now have highlights inherited from adm+sgr.
22229 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
22230 # * xtitle and xtitle-twm enable access to the X status line.
22231 # * Added linux-1.3.6 color palette caps in conventional format.
22232 # * Added adm1178 terminal.
22233 # * Move fos and apollo terminals to obsolete category.
22234 # * Aha! The BRL terminals file told us what the Iris extensions mean.
22235 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
22236 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
22238 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
22239 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
22240 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
22241 # * Corrected, from BRL termcap file: vi50.
22242 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
22243 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
22244 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
22245 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
22246 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
22247 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
22248 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
22249 # * Paired-attribute fixes to various terminals.
22250 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
22251 # * xterm entry corrections from Thomas Dickey.
22252 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
22253 # * Added t916 entry, translated from a termcap in SCO's support area.
22254 # * New qnx entry from Michael Hunter.
22255 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
22256 # * Added hpex2 from Ville Sulko.
22257 # * Fixed a bug that ran the qnx and pcvtXX together.
22258 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
22259 # * Added dtterm entry from Solaris CDE.
22260 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
22261 # * corrected pairs#8 typo in dtterm entry.
22263 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
22264 # * updated xterm entry to cover 3.1.2E's new features.
22265 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
22266 # * Added new minix entry
22267 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
22268 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
22269 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
22270 # * Added Prism entries and kt7ix.
22271 # * Caution notes about EWAN and tabset files.
22272 # * Changed /usr/lib/tabset -> /usr/share/tabset.
22273 # * Added acsc/rmacs/smacs to vt52.
22274 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
22275 # * Merged in Thomas Dickey's reorganization of the xterm entries;
22276 # added technical corrections to avoid warning messages.
22277 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
22278 # * Added rmso=\E[27m in Linux entry.
22279 # * Added koi8-r support for Linux console.
22280 # * Replace xterm entries with canonical ones from XFree86 3.2.
22281 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
22282 # * Added color_xterm from Jacob Mandelson
22283 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
22284 # * Back off the xterm entry to use r6 as a base.
22285 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
22286 # * Added dec-vt220 at Adrian Garside's request.
22288 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
22290 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
22291 # * Minor corrections to xterm entries.
22292 # * Replaced EWAN telnet entry.
22293 # * Dropped the reorder script generator. It was a fossil.
22294 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22295 # * Replaced minitel-2 entry.
22296 # * Added MGR, ansi-nt.
22297 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22298 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22299 # the 4.4BSD Lite2 file.
22301 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
22302 # * Use setaf/setab consistently with SVr4.
22303 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
22304 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
22305 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
22306 # * add xterm-16color, for XFree86 3.3
22307 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
22308 # * correct typo in emu
22309 # * correct typo in vt102-w (Robert Wuest)
22310 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
22311 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
22312 # * remove ech capability from rxvt (it does the wrong thing)
22313 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
22314 # * remove spurious newlines from several entries (hp+color, wy50,
22315 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
22317 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
22318 # * correct rmso capability of wy50-mc
22319 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
22320 # * add cbt to xterm-xf86-v32
22321 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
22322 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
22323 # other capabilities not in xterm-r6.
22324 # * remove alternate character set from kterm entry.
22325 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
22326 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
22327 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
22328 # * add xterm-8bit entry.
22329 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
22330 # * repair several places where early version of tic replaced \, with \\\,
22331 # * make acsc entries canonical form (sorted, uniq).
22332 # * modify acsc entries for linux, linux-koi8
22333 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
22334 # * add color, mouse support to kterm.
22335 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
22336 # * correct wy120 smxon/tbc capabilities which were stuck together.
22337 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
22338 # * add entry for xterm-xf86-v39t
22339 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
22340 # * add u8,u9 to sun-il description
22341 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
22342 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
22344 # * add hds200 description (Walter Skorski)
22345 # * add EMX 0.9b descriptions
22346 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
22347 # * rename xhpterm back to hpterm.
22348 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
22349 # * change initc in linux-c-nc to use 0..1000 range.
22350 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
22351 # * remove hpa/vpa from rxvt, which implements them incorrectly.
22352 # * add sgr0 for rxvt.
22353 # * remove bogus smacs/rmacs from EMX descriptions.
22354 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
22355 # * revised entry for att7300
22356 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
22357 # * use \0 rather than \200.
22358 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
22359 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
22360 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
22361 # * rename xterm-xf86-v39t to xterm-xf86-v40
22362 # * remove bold/underline from sun console entries since they're not
22364 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
22365 # * add beterm entry (Fred Fish)
22366 # * add irix-color/xwsh entry.
22367 # * turn ncv off for linux.
22368 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
22369 # * set ncv for FreeBSD console (treat colors with reverse specially).
22370 # * remove sgr string from qnx based on report by Xiaodan Tang
22371 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
22372 # * remove spurious commas from descriptions
22373 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
22374 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
22375 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22376 # apparently based on cp-866).
22378 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
22380 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22381 # * Replaced minitel-2 entry.
22382 # * Added MGR, ansi-nt.
22383 # * Minor corrections to xterm entries.
22384 # * Replaced EWAN telnet entry.
22385 # * Dropped the reorder script generator. It was a fossil.
22386 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22387 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22388 # the 4.4BSD Lite2 file.
22389 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
22390 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
22391 # * Updated iris-ansi; corrected vt102-w.
22392 # * Switch base xterm entry to 3.3 level.
22393 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
22395 # * Removed rmir/smir from tv92B.
22397 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
22398 # * add hds200 description (Walter Skorski)
22399 # * add beterm entry (Fred Fish)
22400 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
22401 # iris-color entries.
22402 # * add emx entries.
22403 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22404 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22406 # * remove sgr string from qnx based on report by Xiaodan Tang
22407 # * Added u8/u9, removed rmul/smul from sun-il.
22408 # * 4.2 tic displays \0 rather than \200.
22409 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22410 # apparently based on cp-866).
22411 # * Merged in Pavel Roskin's acsc for linux-koi8
22412 # * Corrected some erroneous \\'s to \.
22413 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22414 # * II -> ii in pcvtXX, screen, xterm.
22415 # * Removed \n chars following ANSI escapes in sgr & friends.
22416 # * Updated Wyse entries.
22417 # * h19 corrections from Tim Pierce.
22418 # * Noted that the dm2500 has both ich and smir.
22419 # * added pccons for the Alpha under OSF/1.
22420 # * Added Sony NEWS workstation entries and cit101e-rv.
22421 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22422 # the Verkuil entry messes up with Amiga Telnet.
22423 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22424 # * Corrected attributions in 10.2.0 release notes.
22425 # * Scanned the Shuford archive for new terminfos and information.
22426 # * Removed sgr from qnx entry (Thomas Dickey).
22427 # * Added entries for ICL and Kokusai Data Systems terminals.
22428 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22429 # * Incorporated att700 from the Boundless Technology FTP site.
22430 # * Miscellaneous contact-address and Web-page updates.
22432 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22435 # * add nxterm and xterm-color terminfo description (request by Cristian
22436 # Gafton <gafton@redhat.com>).
22437 # * modify rxvt terminfo description to clear alternate screen before
22438 # switching back to normal screen, for compatibility with applications
22439 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22440 # * modify linux terminfo description to reset color palette (reported
22441 # by Telford Tendys <telford@eng.uts.edu.au>).
22444 # * merge changes from current XFree86 xterm terminfo descriptions.
22447 # * Added minitel1 entries from Alexander Montaron.
22448 # * Added qnxt2 from Federico Bianchi.
22449 # * Added arm100 terminfo entries from Dave Millen.
22452 # * Added ncsa telnet entries from Francesco Potorti
22455 # * modify ncsa telnet entry to reflect color, other capabilities based on
22456 # examination of the source code - T.Dickey.
22459 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22462 # * Added Francesco Potorti's tuned Wyse 99 entries.
22463 # * dtterm enacs correction from Alexander V. Lukyanov.
22464 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22465 # * correct a typo in icl6404 entry.
22466 # * add xtermm and xtermc
22469 # * format most %'char' sequences to %{number}
22470 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22471 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22474 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22475 # * correct initialization string in xterm-r5, add misc other features
22476 # to correspond with xterm patch 84 - TD
22479 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22480 # * add Mathew Vernon's mach console entries
22481 # * corrections for ncsa function-keys (report by Larry Virden)
22484 # * change linux to use ncv#2, since underline does not work with color - TD
22487 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22488 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22489 # application modes, change kent to use the correct keypad code - TD
22492 # * add entry for Tera Term - TD
22495 # * minor improvements for teraterm entry - TD
22496 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22497 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22500 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22501 # xterm and ncsa entries by removing the unneeded ones. Note that
22502 # some entries will return kend & khome versus kslt and kfnd, for
22503 # PC-style keyboards versus strict vt220 compatiblity - TD
22506 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22508 # * add 'crt' entry - TD
22509 # * correct typos in 'linux-c' entry - TD
22512 # * update entries for BSD/OS console to use klone+sgr and klone+color
22513 # (Jeffrey C Honig)
22516 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22519 # * add linux-lat, from RedHat patches to ncurses 4.2
22522 # * add complete set of default function-key definitions for scoansi - TD.
22525 # * add cnorm, cvvis for Linux 2.2 kernels
22528 # * add kmous to xterm-r5 -TD
22529 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22530 # parent "use" clause -TD
22533 # * corrected cnorm, added el1 in 'screen' description -TD
22536 # * add ms-vt100 -TD
22539 # * corrections to beterm entry -TD
22542 # * add cygwin entry -TD
22545 # * minor corrections for beterm entry -TD
22548 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22551 # * add amiga-8bit entry
22552 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22553 # rcons-color, based on
22554 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22555 # * add alias for iris-ansi-net
22558 # * corrected scoansi entry's acsc, some function keys, add color -TD
22561 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22562 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22563 # key mapping, leaving Potorti's entries more like he named them -TD
22564 # * remove enter/exit am-mode from cygwin -TD
22567 # * correct typos in several entries (missing '[' from CSI):
22568 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22569 # strings for avt-ns -TD
22570 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22573 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22574 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22575 # * add xterm-88color and xterm-256color -TD
22578 # * add "obsolete" termcap strings -TD
22579 # * add kvt and gnome entries -TD
22582 # * correct cup string for regent100 -TD
22585 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22586 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22587 # * change OTrs capabilities to rs2 -TD
22588 # * add obsolete and extended capabilities to 'screen' -TD
22591 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22593 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22594 # and adding kcbt -TD
22597 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22598 # nonstandard resource settings -TD
22601 # * minor fixes for xterm-*, based on Debian #58530 -TD
22604 # * add several terminal types from esr's "11.0", as well as comments.
22605 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22606 # vt220-8bit, vt220-old, wy85-8bit
22609 # * add several terminal types from esr's "11.0.1" (ansi-*).
22610 # * update OTxx capabilities for changes on 2000/3/4.
22611 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22614 # * move screen's AX extension to ecma+color, modify several entries to
22615 # use that, adjusting ncv as needed -TD
22618 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22619 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22620 # in esr's version.
22623 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22624 # * correct color definition for ibm3164, make minor changes to other
22625 # IBM terminal definitions based on recent terminfo descriptions -TD
22628 # * add mgterm, from NetBSD -TD
22629 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22630 # * change cons25w to use rs2 for reset rather than rs1 -TD
22631 # * add rc/sc to aixterm based on manpage -TD
22634 # * remove ncv from xterm-16color, xterm-256color
22637 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22640 # * add Eterm (Michael Jennings)
22643 # * add amiga-vnc entry.
22646 # * correct description of Top Gun Telnet.
22647 # * add kterm-color
22650 # * add qansi* entries from QNX ftp site.
22653 # * add Matrix Orbital entries by Eric Z. Ayers).
22654 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22658 # * add S0, E0 extensions to screen's entry -TD
22661 # * several corrections based on tic's new parameter-checking code -TD
22662 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22663 # bracketing sequences that reset video attributes (\E8 would restore
22667 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22670 # * improved scoansi, based on SCO man-page, and testing console,
22671 # scoterm with tack -TD
22674 # * modify kterm to use acsc via SCS controls.
22677 # * screen 3.9.8 allows xterm mouse controls to pass-through
22680 # * remove spurious "%|" from some xterm entries.
22683 # * modify 'screen' khome/kend to match screen 3.09.08
22684 # * add examples of 'screen' customization (screen.xterm-xfree86,
22685 # screen.xterm-r6, screen.teraterm) -TD
22688 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22689 # * add "Apple_Terminal" entries -Benjamin Sittler
22690 # * remove time-delays from "Apple_Terminal" entries -TD
22691 # * make sgr entries time-delays consistent with individual caps -TD
22694 # * corrected/updated screen.xterm-xfree86
22697 # * ELKS descriptions, from Federico Bianchi
22698 # * add u6 (CSR) to Eterm (Michael Jennings).
22701 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22702 # tic which handles names no longer than 14 characters. Add
22703 # corresponding descriptions for the Darwin PowerPC console named
22704 # "xnuppc" -Benjamin Sittler
22707 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22710 # * add "putty" entry -TD
22711 # * updated "Apple_Terminal" entries -Benjamin Sittler
22714 # * add ms-vt100-color entry -TD
22715 # * add "konsole" entries -TD
22718 # * update gnome entry to Redhat 7.2 -TD
22721 # * add kf13-kf48 strings to cons25w -TD
22722 # * add pcvt25-color entry -TD
22723 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22724 # * improve some features of scoansi entry based on SCO's version -TD
22725 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22728 # * add kcbt to screen entry -TD
22731 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22734 # * split out linux-basic entry, making linux-c inherit from that, and
22735 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22736 # the history of this console type -TD
22737 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22738 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22741 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22744 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22745 # in the latter -TD
22748 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22749 # * ncr260wy350pp has only 16 color pairs -TD
22750 # * add sun-type4 from NetBSD -TD
22751 # * update xterm-xfree86 to current (patch 170) -TD
22752 # * add screen-bce, screen-s entries -TD
22753 # * add xterm-1002, xterm-1003 entries -TD
22756 # * update homepage for Top Gun Telnet/SSH
22759 # * reduce duplication in emx entries, added emx-base -TD
22762 # * corrected acs for screen.teraterm -TD
22763 # * add tkterm entry -TD
22766 # * cygwin changes from Charles Wilson:
22767 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22768 # primary instead of nxterm, to match XFree86's xterm.terminfo
22769 # usage and to prevent circular links.
22770 # (rxvt): add additional codes from rxvt.org.
22771 # (rxvt-color): new alias
22772 # (rxvt-xpm): new alias
22773 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22774 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22775 # with a "native" MSWin GUI. Each takes different acsc codes,
22776 # which are both different from the "normal" rxvt's acsc.
22777 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22778 # (cygwinDBG): ditto.
22781 # * update gnome terminal entries -TD
22784 # * add entries for djgpp 2.03 and 2.04 -TD
22787 # * add alias for vtnt -TD
22788 # * update xterm-xfree86 for XFree86 4.4 -TD
22791 # * add linux-vt (Andrey V Lukyanov)
22794 # * add screen.linux -TD
22797 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22800 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22801 # * add vt100+ and vt-utf8 entries -TD
22802 # * add uwin entry -TD
22805 # * add sgr strings to several common entries lacking them, e.g.,
22806 # screen, to make the entries more portable -TD
22807 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22808 # * similar fixups for cvvis/cnorm various entries -TD
22811 # * remove 'ncv' from xterm-256color (patch 188) -TD
22815 # * add xterm-xf86-v44 -TD
22816 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22817 # on G1 being used via an ISO-2022 escape sequence (report by
22818 # Juliusz Chroboczek) -TD
22819 # * add 'hurd' entry -TD
22822 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22824 # * align with xterm #192's use of xterm-new -TD
22825 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22826 # * make xterm-new the default "xterm" -TD
22829 # * minor fixes for emu -TD
22831 # * add rmam/smam to linux (Trevor Van Bremen)
22832 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22833 # * fixes for avatar0 -TD
22834 # * fixes for vp3a+ -TD
22837 # * add xterm-pc-fkeys -TD
22838 # * review/update gnome and gnome-rh90 entries (prompted by
22839 # Redhat Bugzilla #122815) -TD
22840 # * review/update konsole entries -TD
22841 # * add sgr, correct sgr0 for kterm and mlterm -TD
22842 # * correct tsl string in kterm -TD
22845 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22846 # * add sgr, rc/sc and ech to syscons entries -TD
22847 # * add function-keys to decansi -TD
22848 # * add sgr to mterm-ansi -TD
22849 # * add sgr, civis, cnorm to emu -TD
22850 # * correct/simplify cup in addrinfo -TD
22851 # * corrections for gnome and konsole entries
22852 # (Redhat Bugzilla #122815) -Hans de Goede
22853 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22854 # ISO-2022 strings for rmacs/smacs -TD
22857 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22860 # * improved putty entry -Robert de Bath
22863 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22864 # with the common usage of bce/ech -TD
22865 # * remove khome from vt220 (vt220's have no home key) -TD
22866 # * add rxvt+pcfkeys -TD
22869 # * modify several entries to ensure xterm mouse and cursor visibility
22870 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22871 # Eterm, screen. (The xterm entries are left alone - old ones for
22872 # compatibility, and the new ones do not require this change) -TD
22875 # * add morphos entry -Pavel Fedin
22876 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22877 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22880 # * update wsvt25 entry -TD
22883 # * update pairs for xterm-88color and xterm-256color to reflect the
22884 # ncurses extended-color support -TD
22887 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22888 # * add aixterm-16color to demonstrate 16-color capability -TD
22891 # * add media-copy to vt100 -TD
22892 # * corrected acsc string for vt52 -TD
22895 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22897 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22900 # * re-corrected acsc string for vt52 -TD
22903 # * corrected sun-il sgr string which referred to bold and underline -TD
22904 # * add sun-color entry -TD
22907 # * modify sgr0 in several entries to reset alternate-charset as in the
22909 # * modify sgr string of prism9 to better match the individual
22913 # * correct order of use= in rxvt-basic -TD
22916 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22919 # * other minor fixes to cygwin based on tack -TD
22920 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22923 # * add nsterm-16color entry -TD
22924 # * remove ncv flag from xterm-16color -TD
22925 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22926 # * update mlterm entry to 2.9.2 -TD
22929 # * fixes to make nsterm-16color match report
22930 # by Christian Ebert -Alain Bench
22933 # * add xterm+256color building block -TD
22934 # * add gnome-256color, putty-256color, rxvt-256color -TD
22937 # * add hpterm-color -TD
22940 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22941 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22942 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22943 # * improve xterm-256color by combining the ibm+16color setaf/setab
22944 # strings with SGR 48. The setf/setb strings also are cancelled here
22945 # rather than omitted so derived entries will cancel those also -Alain
22949 # * add some notes regarding copyright to terminfo.src -TD
22950 # * use rxvt+pcfkeys in Eterm -TD
22951 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22952 # as one would expect (km sends ESC rather than setting the 8th bit
22954 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22955 # * add konsole-solaris -TD
22958 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22959 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22960 # * modify xterm-24 to inherit from "xterm" -TD
22961 # * add xiterm entry -TD
22962 # * add putty-vt100 entry -TD
22963 # * corrected spelling of Michael A Dorman's name, prompted by
22964 # http://www.advogato.org/person/mdorman/diary.html -TD
22967 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22968 # * update xterm+pcfkeys to match xterm #216 -TD
22971 # * make descriptions of xterm entries consistent with its terminfo -TD
22974 # * add xfce, mgt -TD
22977 # * correct acsc string in kterm -TD
22980 # * add kon entry -TD
22981 # * remove invis from linux and related entries, add klone+sgr8 for those
22982 # that implement the feature (or have not been shown to lack it) -TD
22985 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22986 # * minor improvements to rxvt+pcfkeys -TD
22989 # * fix a few typos in if/then/else expressions -TD
22992 # * add several GNU Screen variations with 16- and 256-colors, and
22993 # status line (Alain Bench).
22996 # * add Newbury Data entries (Jean-Charles Billaud).
22999 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
23002 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
23003 # * add konsole-256color entry -TD
23006 # * add 9term entry (request by Juhapekka Tolvanen) -TD
23009 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
23010 # * add shift-control- and control-modified keys for rxvt editing
23012 # * update mlterm entry to 2.9.3 -TD
23013 # * add mlterm+pcfkeys -TD
23016 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
23017 # xterm+pcc0, etc., to make the corresponding building blocks reflect
23018 # xterm's capabilities -TD
23019 # * add mrxvt entry -TD
23020 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
23023 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
23026 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
23027 # xterm starting with patch #216 -TD
23028 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
23029 # to match xterm #230 -TD
23030 # * extend xterm+pccX entries to match xterm #230 -TD
23031 # * add xterm+app, xterm+noapp, from xterm #230 -TD
23032 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
23035 # * add screen.rxvt -TD
23038 # * add screen+fkeys (prompted by Debian #478094) -TD
23041 # * add screen.mlterm -TD
23042 # * improve mlterm and mlterm+pcfkeys -TD
23045 # * add Eterm-256color, Eterm-88color -TD
23046 # * add rxvt-88color -TD
23049 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
23050 # original to teraterm2.3 -TD
23051 # * update "gnome" to 2.22.3 -TD
23052 # * update "konsole" to 1.6.6 -TD
23053 # * add "aterm" -TD
23054 # * add "linux2.6.26" -TD
23057 # * change several \E[2g (clear tab at current column) to \E[3g
23058 # (clear all tabs) to match definition for tbc capability -TD
23061 # * add eterm-color -TD
23064 # * add screen.Eterm -TD
23067 # * correct typo in pfkey of ansi.sys-old
23068 # (report by Kalle Olavi Niemitalo)
23069 # * move function- and cursor-keys from emx-base to ansi.sys, and create
23070 # a pfkey capability which handles F1-F48 -TD
23073 # * add vwmterm entry (Bryan Christ)
23076 # * change ncv and op capabilities in sun-color to match Sun's entry for
23077 # this (report by Laszlo Peter)
23078 # * improve interix smso by using reverse rather than bold (report by
23079 # Kristof Zelechovski).
23082 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
23083 # * add linux-16color (Benjamin Sittler)
23084 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
23085 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
23086 # * add ccc and initc capabilities to xterm-16color -TD
23089 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
23092 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
23095 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
23096 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
23099 # * add bterm (bogl 0.1.18) -TD
23100 # * minor fix to rxvt+pcfkeys -TD
23103 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
23106 # * add several screen-bce.XXX entries -TD
23109 # * modify screen-bce.XXX entries to exclude ech, since screen's color
23110 # model does not clear with color for that feature -TD
23113 # * rename atari and st52 to atari-old, st52-old, use newer entries from
23114 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
23117 # * add mlterm+256color entry -TD
23120 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
23121 # the alternate character set (patch by Nicholas Marriott)
23124 # * improve acsc for vt52 (Benjamin Sittler)
23125 # * modify nsterm entries for consistent sgr/sgr0 -TD
23126 # * modify xnuppc entries for consistent sgr/sgr0 -TD
23127 # * add invis to tek4115 sgr -TD
23130 # * reformat acsc strings to canonical format -TD
23133 # * add "XT" capability to entries for terminals that support both
23134 # xterm-style mouse- and title-controls, for "screen" which
23135 # special-cases TERM beginning with "xterm" or "rxvt" -TD
23138 # * fill in no-parameter forms of cursor-movement where a parameterized
23139 # form is available -TD
23140 # * fill in missing cursor controls where the form of the controls is
23142 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
23145 # * correct comparison used for setting 16-colors in linux-16color
23146 # entry (Novell #644831) -TD
23147 # * improve linux-16color entry, using "dim" for color-8 which makes it
23148 # gray rather than black like color-0 -TD
23151 # * make "vte" the principal entry defining "gnome", since GNOME terminal
23152 # is merely one of several terminals whose behavior is provided by this
23156 # * fix typo in rmso for tek4106 -Goran Weinholt
23159 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
23160 # * also suppress ncv in konsole-base -TD
23163 # * add U8 feature to denote entries for terminal emulators which do not
23164 # support VT100 SI/SO when processing UTF-8 encoding -TD
23165 # * add xterm-utf8 as a demo of the U8 feature -TD
23168 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
23171 # * update minix entry to minix 3.2 (Thomas Cort).
23174 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
23175 # * remove a backslash which continued comment, obscuring altos3
23176 # definition with OpenBSD toolset (Nicholas Marriott).
23179 # * add/use xterm+tmux chunk from xterm #271 -TD
23180 # * resync xterm-new entry from xterm #271 -TD
23181 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
23182 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
23183 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
23186 # * add kich1 to sun (Yuri Pankov)
23187 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
23190 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
23193 # * minor cleanup of X-terminal emulator section -TD
23194 # * add terminator entry -TD
23195 # * add simpleterm entry -TD
23198 # * add xterm+kbs fragment from xterm #272 -TD
23201 # * add pccon entries for OpenBSD console (Alexei Malinin)
23204 # * corrected old changelog comments -TD
23207 # * add putty-sco -TD
23210 # * add mach-gnu (Samuel Thibault)
23211 # * add mach-gnu-color, tweaks to mach-gnu -TD
23212 # * make sgr for sun-color agree with smso -TD
23213 # * make sgr for prism9 agree with other caps -TD
23214 # * make sgr for icl6404 agree with other caps -TD
23215 # * make sgr for ofcons agree with other caps -TD
23216 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
23217 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
23218 # * make sgr for avt-ns agree with other caps -TD
23221 # * make sgr for xterm-pcolor agree with other caps -TD
23222 # * make sgr for att5425 agree with other caps -TD
23223 # * make sgr for att630 agree with other caps -TD
23224 # * make sgr for linux entries agree with other caps -TD
23225 # * make sgr for tvi9065 agree with other caps -TD
23226 # * make sgr for ncr260vt200an agree with other caps -TD
23227 # * make sgr for ncr160vt100pp agree with other caps -TD
23228 # * make sgr for ncr260vt300an agree with other caps -TD
23229 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
23230 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
23233 # * correct order of use-clauses in st-256color -TD
23236 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
23239 # * document all of the user-defined capabilities in one place -TD
23240 # * add XT to some places to improve usefulness for other applications
23241 # than screen, which would like to pretend that xterm's title is
23242 # a status-line. -TD
23243 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
23244 # of ordering and overrides -TD
23247 # * add msgr to vt420, similar DEC vtXXX entries -TD
23248 # * add several missing vt420 capabilities from vt220 -TD
23249 # * factor out ansi+pp from several entries -TD
23250 # * change xterm+sl and xterm+sl-twm to include only the status-line
23251 # capabilities and not "use=xterm", making them more generally useful
23252 # as building-blocks -TD
23253 # * add dec+sl building block, as example -TD
23256 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
23257 # * add eslok flag to dec+sl -TD
23258 # * dec+sl applies to vt320 and up -TD
23259 # * drop wsl width from xterm+sl -TD
23260 # * reuse xterm+sl in putty and nsca-m -TD
23261 # * add ansi+tabs to vt520 -TD
23262 # * add ansi+enq to vt220-vt520 -TD
23265 # * remove p6 (bold) from opus3n1+ for consistency -TD
23266 # * remove acs stuff from env230 per clues in Ingres termcap -TD
23267 # * modify env230 sgr/sgr0 to match other capabilities -TD
23268 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
23269 # * make sgr for dku7202 agree with other caps -TD
23270 # * make sgr for ibmpc agree with other caps -TD
23271 # * make sgr for tek4107 agree with other caps -TD
23272 # * make sgr for ndr9500 agree with other caps -TD
23273 # * make sgr for sco-ansi agree with other caps -TD
23274 # * make sgr for d410 agree with other caps -TD
23275 # * make sgr for d210 agree with other caps -TD
23276 # * make sgr for d470c, d470c-7b agree with other caps -TD
23279 # * rewrite vt520 entry based on vt420 -TD
23280 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
23283 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
23284 # analysis by Martin Husemann).
23285 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
23286 # Onno van der Linden).
23287 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
23288 # * add kdch1, etc., to qvt108 -TD
23289 # * add dl1/il1 to some entries based on dl/il values -TD
23290 # * add dl to simpleterm -TD
23293 # * modify some older xterm entries to align with xterm source -TD
23294 # * separate "xterm-old" alias from "xterm-r6" -TD
23297 # * add E3 to xterm-basic and putty -TD
23300 # * add nsterm-256color, make this the default nsterm -TD
23301 # * remove bw from nsterm-bce, per testing with tack -TD
23304 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
23305 # (patch by Christian Persch).
23308 # * reviewed vte-2012, reverted most of the change since it was incorrect
23309 # based on testing with tack -TD
23310 # * un-cancel the initc in vte-256color, since this was implemented
23311 # starting with version 0.20 in 2009 -TD
23314 # * correct typo in sgr string for sun-color,
23315 # add bold for consistency with sgr,
23316 # change smso for consistency with sgr -TD
23317 # * correct typo in sgr string for terminator -TD
23318 # * add blink to the attributes masked by ncv in linux-16color (report
23319 # by Benjamin Sittler)
23322 # * change initialization for vt220, similar entries for consistency
23323 # with cursor-key strings (NetBSD #47674) -TD
23324 # * further improvements to linux-16color (Benjamin Sittler)
23327 # * move nsterm-related entries out of "obsolete" section to more
23328 # plausible "ansi consoles" -TD
23329 # * additional cleanup of table-of-contents by reordering -TD
23332 # * added note to clarify Terminal.app's non-emulation of the various
23333 # terminal types listed in the preferences dialog -TD
23336 # * use TS extension to describe xterm's title-escapes -TD
23337 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
23338 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
23339 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
23340 # (Debian #727119).
23341 # * simplify pfkey expression in ansi.sys -TD
23344 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
23347 # * updated notes for wsvt25 based on tack and vttest -TD
23348 # * add teken entry to show actual properties of FreeBSD's "xterm"
23352 # * add terminology entry -TD
23353 # * add mlterm3 entry, use that as "mlterm" -TD
23354 # * inherit mlterm-256color from mlterm -TD
23357 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
23360 # * cancel ccc in putty-256color and konsole-256color for consistency
23361 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
23362 # * add xterm+256setaf building block for various terminals which only
23363 # get the 256-color feature half-implemented -TD
23364 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
23368 # * add vt520ansi (Mike Gran)
23371 # * correct several entries which had termcap-style padding used in
23372 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
23373 # * correct syntax for padding in some entries: dg211, h19 -TD
23374 # * correct ti924-8 which had confused padding versus octal escapes -TD
23375 # * correct padding in sbi entry -TD
23378 # * update xterm-new to patch #305 -TD
23379 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
23380 # (italic). This was a long-ago typo in screen 3.1.1 which was
23381 # overlooked until a few terminal emulators implemented the feature -TD
23384 # > fix regression in screen terminfo entries (reports by Christian
23385 # Ebert, Gabriele Balducci) -TD
23386 # + revert the change to screen; see notes for why this did not work -TD
23387 # + cancel sitm/ritm for entries which extend "screen", to work around
23388 # screen's hardcoded behavior for SGR 3 -TD
23391 # + modify sgr for screen.xterm-new to support dim capability -TD
23392 # + add dim capability to nsterm+7 -TD
23393 # + cancel dim capability for iterm -TD
23394 # + add dim, invis capabilities to vte-2012 -TD
23395 # + add sitm/ritm to konsole-base and mlterm3 -TD
23397 ######## SHANTIH! SHANTIH! SHANTIH!