1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2012/06/02 20:15:40 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### ANSI console types
704 # Atari ST terminals.
705 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
707 tw52|tw52-color|Toswin window manager with color,
709 colors#16, pairs#256,
710 oc=\Eb?\Ec0, op=\Eb?\Ec0,
711 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
713 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
716 tw52-m|Toswin window manager monochrome,
719 bold=\Eya, dch1=\Ea, dim=\EyB,
720 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
721 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
722 smso=\EyQ, smul=\EyH, use=at-m,
723 tt52|Atari TT medium and high resolution,
724 lines#30, use=at-color,
725 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
727 colors#16, pairs#256,
728 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
729 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
731 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
734 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
736 cols#80, it#8, lines#24,
737 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
738 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
739 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
740 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
741 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
742 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
743 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
744 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
745 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
746 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
747 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
748 tw100|toswin vt100 window mgr,
750 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
751 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
752 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
753 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
754 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
755 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
756 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
757 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
758 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
759 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
760 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
761 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
762 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
763 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
764 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
765 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
766 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
767 rmso=\E[m, rmul=\E[m,
768 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
770 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
771 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
772 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
773 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
774 # The entries for stv52 and stv52pc probably need a revision.
775 stv52|MiNT virtual console,
777 cols#80, it#8, lines#30,
778 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
779 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
780 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
781 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
782 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
783 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
784 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
785 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
786 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
787 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
788 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
789 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
790 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
791 stv52pc|MiNT virtual console with PC charset,
793 cols#80, it#8, lines#30,
794 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
795 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
796 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
797 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
798 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
799 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
800 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
801 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
802 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
803 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
804 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
805 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
806 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
812 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
815 cols#80, it#8, lines#25,
816 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
817 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
818 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
819 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
820 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
821 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
822 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
824 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
826 # MiNT VT52 emulation. 80 columns, 25 rows.
827 # MiNT is Now TOS, the operating system which comes with all Ataris now
828 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
829 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
830 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
831 st52-old|Atari ST with VT52 emulation,
834 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
835 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
836 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
837 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
838 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
839 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
840 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
841 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
842 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
847 # BeOS entry for Terminal program Seems to be almost ANSI
848 beterm|BeOS Terminal,
849 am, eo, mir, msgr, xenl, xon,
850 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
851 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
852 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
853 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
854 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
855 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
856 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
857 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
858 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
859 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
860 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
861 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
862 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
863 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
864 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
865 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
867 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
868 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
869 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
875 # This entry is good for the 1.2.13 or later version of the Linux console.
877 # ***************************************************************************
880 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
881 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
882 # * character. Here are the keymap replacement lines that will set this up: *
884 # keycode 15 = Tab Tab
885 # alt keycode 15 = Meta_Tab
886 # shift keycode 15 = F26
887 # string F26 ="\033[Z"
889 # * This has to use a key slot which is unfortunate (any unused one will *
890 # * do, F26 is the higher-numbered one). The change ought to be built *
891 # * into the kernel tables. *
893 # ***************************************************************************
895 # All linux kernels since 1.2.13 (at least) set the screen size
896 # themselves; this entry assumes that capability.
898 linux-basic|linux console,
899 am, bce, eo, mir, msgr, xenl, xon,
901 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
902 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
903 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
904 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
905 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
906 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
907 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
908 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
909 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
910 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
911 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
912 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
913 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
914 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
915 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
916 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
917 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
918 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
919 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
920 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
921 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
924 linux-m|Linux console no color,
926 setab@, setaf@, setb@, setf@, use=linux,
928 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
929 # and it matters, turn off <ccc>. The %02x escape used to implement this is
930 # not supposedly back-portable to older SV curses (although it has worked fine
931 # on Solaris for several years) and not supported in ncurses versions before
933 linux-c-nc|linux console with color-change,
935 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
936 oc=\E]R, use=linux-basic,
937 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
938 linux-c|linux console 1.3.6+ for older ncurses,
940 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
941 oc=\E]R, use=linux-basic,
943 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
944 # get a block cursor for cvvis.
945 # reported by Frank Heckenbach <frank@g-n-u.de>.
946 linux2.2|linux 2.2.x console,
947 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
948 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
950 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
951 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
952 # Using SI/SO has the drawback that it confuses screen. SCS would work.
953 # However, SCS is buggy (see comment in Debian #515609) -TD
954 # Further, this breaks longstanding workarounds for Linux console's line
955 # drawing (see Debian 665959) -TD
956 linux2.6|linux 2.6.x console,
958 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
959 sgr0=\E[m\017, smacs=^N, use=linux2.2,
961 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
962 linux3.0|linux 3.0 kernels,
963 E3=\E[3;J, use=linux2.6,
965 # This is Linux console for ncurses.
969 # Subject: linux 2.6.26 vt back_color_erase
970 # Changes to the Linux console driver broke bce model as reported in
971 # https://bugzilla.novell.com/show_bug.cgi?id=418613
973 # http://lkml.org/lkml/2008/4/26/305
974 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
975 linux2.6.26|linux console w/o bce,
978 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
979 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
980 ich@, ich1@, use=linux,
982 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
983 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
984 linux-koi8|linux with koi8 alternate character set,
985 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
986 use=linux, use=klone+koi8acs,
988 # Another entry for KOI8-r with Qing Long's acsc.
989 # (which one better complies with the standard?)
990 linux-koi8r|linux with koi8-r alternate character set,
991 use=linux, use=klone+koi8acs,
993 # Entry for the latin1 and latin2 fonts
994 linux-lat|linux with latin1 or latin2 alternate character set,
995 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
998 # This uses graphics from VT codeset instead of from cp437.
999 # reason: cp437 (aka "straight to font") is not functional under luit.
1000 # from: Andrey V Lukyanov <land@long.yar.ru>.
1001 linux-vt|linux console using VT codes for graphics,
1002 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1003 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1006 # This is based on the Linux console (relies on the console to perform some
1007 # of the functionality), but does not recognize as many control sequences.
1008 # The program comes bundled with an old (circa 1998) copy of the Linux
1009 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1010 # \E* move cursor to home, as as \E[H
1012 # \EE move cursor to beginning of row
1013 # \E[y,xf same as \E[y,xH
1015 # Note: The status-line support is buggy (dsl does not work).
1016 kon|kon2|jfbterm|Kanji ON Linux console,
1018 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1019 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1022 # 16-color linux console entry; this works with a 256-character
1023 # console font but bright background colors turn into dim ones when
1024 # you use a 512-character console font. This uses bold for bright
1025 # foreground colors and blink for bright background colors.
1026 linux-16color|linux console with 16 colors,
1027 colors#16, ncv#54, pairs#256,
1028 setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
1029 setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
1032 # bterm (bogl 0.1.18)
1033 # Implementation is in bogl-term.c
1034 # Key capabilities from linux terminfo entry
1037 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1038 # bterm does not support sgr, since it only processes one parameter -TD
1039 bterm|bogl virtual terminal,
1041 colors#8, cols#80, lines#24, pairs#64,
1042 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1043 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1044 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1045 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1046 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1047 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1048 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1049 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1050 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1051 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1052 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1053 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1054 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1055 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1060 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1063 cols#80, it#8, lines#25,
1064 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1065 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1066 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1067 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1068 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1069 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1070 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1071 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1072 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1073 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1074 smso=\E[7m, smul=\E[4m,
1075 mach-bold|Mach Console with bold instead of underline,
1076 rmul=\E[0m, smul=\E[1m, use=mach,
1077 mach-color|Mach Console with ANSI color,
1079 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1080 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1082 # From: Samuel Thibault
1083 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1084 # Files: i386/i386at/kd.c
1086 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1088 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1089 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1090 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1091 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1092 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1095 mach-gnu-color|Mach Console with ANSI color,
1097 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1098 setaf=\E[3%p1%dm, use=mach-gnu,
1100 # From: Marcus Brinkmann
1101 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1103 # Comments in the original are summarized here:
1105 # hurd uses 8-bit characters (km).
1107 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1109 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1110 # have the eat_newline_glitch. It doesn't support setting or removing tab
1113 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1114 # one byte instead three.
1116 # <ich1> is not included because hurd has insert mode.
1118 # hurd doesn't use ^J for scrolling, because this could put things into the
1119 # scrollback buffer.
1121 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1122 # This is a GNU extension.
1124 # The original has commented-out ncv, but is restored here.
1126 # Reading the source, RIS resets cnorm, but not xmous.
1127 hurd|The GNU Hurd console server,
1128 am, bce, bw, eo, km, mir, msgr, xon,
1129 colors#8, it#8, ncv#18, pairs#64,
1130 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1131 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1132 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1133 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1134 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1135 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1136 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1137 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1138 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1139 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1140 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1141 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1142 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1143 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1144 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1145 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1146 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1147 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1148 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1149 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1150 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1151 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1152 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1153 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1154 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1160 # OSF/1 1.1 Snapshot 2
1161 pmcons|pmconsole|PMAX console,
1164 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
1165 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1166 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1168 # SCO console and SOS-Syscons console for 386bsd
1169 # (scoansi: had unknown capabilities
1170 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1171 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1172 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1173 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1174 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1175 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1176 # on the <smacs>=\E[12m -- esr)
1178 # klone+sgr-dumb is an error since the acsc does not match -TD
1180 # In this description based on SCO's keyboard(HW) manpage list of default
1181 # function key values:
1182 # F13-F24 are shifted F1-F12
1183 # F25-F36 are control F1-F12
1184 # F37-F48 are shift+control F1-F12
1186 # hpa/vpa work in the console, but not in scoterm:
1190 # SCO's terminfo uses
1193 # which do not work (console or scoterm).
1195 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1196 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1197 OTbs, am, bce, eo, xon,
1198 colors#8, cols#80, it#8, lines#25, pairs#64,
1199 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
1200 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1201 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1202 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1203 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1204 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1205 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1206 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1207 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1208 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
1209 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1210 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
1211 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
1212 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
1213 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
1214 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
1215 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
1216 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
1217 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
1218 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
1219 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1220 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
1221 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
1222 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1223 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
1224 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
1225 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1227 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1228 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1229 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1230 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
1231 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1232 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1233 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1234 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1235 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1237 # make this easy to change...
1238 scoansi|SCO Extended ANSI standard crt,
1241 # This actually describes the generic SVr4 display driver for Intel boxes.
1242 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
1243 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
1244 att6386|at386|386at|AT&T WGS 6386 console,
1246 cols#80, it#8, lines#25,
1247 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1248 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
1249 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
1250 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1251 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1252 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1253 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1254 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
1255 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
1256 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
1257 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1258 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1259 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1260 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1261 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1262 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1264 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1265 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1266 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
1267 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1268 pc6300plus|AT&T 6300 plus,
1271 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1272 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1273 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1274 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1275 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1276 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1277 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1278 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1279 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1280 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1282 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1284 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1285 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1286 # is broken. All the special key sequences are broken, making it unusable
1287 # with Emacs. The problem stems from the following:
1289 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1290 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1291 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1292 # uses resizable terminal windows, but the bundled terminal program always
1293 # uses an 80x24 window (and doesn't support seem to support a 132-column
1296 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1297 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1298 # access method".) tam includes support for real, overlapping windows,
1299 # onscreen function key labels, and bitmap graphics. But since the primary
1300 # user interface on the UNIX PC was a GUI program (ua, for "user
1301 # assistant",) and remote administration was considered important for the
1302 # machine, tam also supported VT100-compatible terminals attached to the
1303 # serial port or used across the StarLan network. To simulate the extra keys
1304 # not present on a VT100, users could press ESC and a two-letter sequence,
1305 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1306 # however, were not the same as those sent by the actual Undo key. The
1307 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1308 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1309 # have the full documentation and several programs which use tam. It also
1310 # used an extended terminfo format to describe key sequences, special
1311 # highlighting modes, etc.)
1313 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1314 # there are two sequences for every key-modifier combination (local keyboard
1315 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1316 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1317 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1318 # seem to have been built from the manual describing the VT100 sequences.
1319 # This means it doesn't work for a real live UNIX PC.
1321 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1322 # character set". Rather than the VT100 graphics you might expect, it allows
1323 # up to 8 custom fonts to be loaded at any given time. This means that
1324 # programs expecting VT100 graphics will usually be disappointed. For this
1325 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1326 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1327 # manpage), should you wish to do so:
1329 # SGR10 - Select font 0 - ESC [ 10 m or SO
1330 # SGR11 - Select font 1 - ESC [ 11 m or SI
1331 # SGR12 - Select font 2 - ESC [ 12 m
1333 # SGR17 - Select font 7 - ESC [ 17 m
1335 # Graphics for line drawing are not reliably found at *any* character
1336 # location because the UNIX PC has dynamically reloadable fonts. I use font
1337 # 0 for regular text and font 1 for italics, but this is by no means
1338 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1340 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1341 # distributed terminfo.
1343 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1344 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1345 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1346 # attached by serial cable. In Emacs, even the Undo key works, and many
1347 # applications can now use the F1-F8 keys.
1350 # Terminfo entry for the AT&T Unix PC 7300
1351 # from escape(7) in Unix PC 7300 Manual.
1352 # Somewhat similar to a vt100-am (but different enough
1353 # to redo this from scratch.)
1355 # /***************************************************************
1357 # * FONT LOADING PROGRAM FOR THE UNIX PC
1359 # * This routine loads a font defined in the file ALTFONT
1360 # * into font memory slot #1. Once the font has been loaded,
1361 # * it can be used as an alternative character set.
1363 # * The call to ioctl with the argument WIOCLFONT is the key
1364 # * to this routine. For more information, see window(7) in
1365 # * the PC 7300 documentation.
1366 # ***************************************************************/
1367 # #include <string.h> /* needed for strcpy call */
1368 # #include <sys/window.h> /* needed for ioctl call */
1369 # #define FNSIZE 60 /* font name size */
1370 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1372 # * The file /usr/lib/wfont/special.8.ft comes with the
1373 # * standard PC software. It defines a graphics character set
1374 # * similar to that of the Teletype 5425 terminal. To view
1375 # * this or other fonts in /usr/lib/wfont, use the command
1376 # * cfont <filename>. For further information on fonts see
1377 # * cfont(1) in the PC 7300 documentation.
1380 # struct altfdata /* structure for alt font data */
1382 # short altf_slot; /* memory slot number */
1383 # char altf_name[FNSIZE]; /* font name (file name) */
1387 # int wd; /* window in which altfont will be */
1388 # struct altfdata altf;
1390 # strcpy(altf.altf_name,ALTFONT);
1391 # for (wd =1; wd < 12; wd++) {
1392 # ioctl(wd, WIOCLFONT,&altf);
1396 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1397 # they're confirmed by the man page for the System V display---esr)
1399 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1401 cols#80, it#8, lines#24,
1402 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1403 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1404 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1405 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1406 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1407 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1408 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1409 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1410 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1411 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1412 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1413 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1414 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1415 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1416 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1417 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1418 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1419 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1420 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1421 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1422 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1423 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1426 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1427 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1428 # for the application keypad mode. We have added iris-ansi-ap rather than
1429 # change the original to keypad mode.
1431 # (iris-ansi: added rmam/smam based on init string -- esr)
1433 # This entry, and those derived from it, is used in xwsh (also known as
1434 # winterm). Some capabilities that do not fit into the terminfo model
1435 # include the shift- and control-functionkeys:
1437 # F1-F12 generate different codes when shift or control modifiers are used.
1441 # control-F1 \E[025q
1443 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1444 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1446 # The cursor keys also have different codes:
1447 # control-up \E[162q
1448 # control-down \E[165q
1449 # control-left \E[159q
1450 # control-right \E[168q
1453 # shift-down \E[164q
1454 # shift-left \E[158q
1455 # shift-right \E[167q
1457 # control-tab \[072q
1459 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1461 cols#80, it#8, lines#40,
1462 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1463 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1464 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1465 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1466 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1467 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1468 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1469 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1470 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1471 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1472 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1473 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1474 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1475 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1476 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1477 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1478 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1479 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1480 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1482 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1483 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1484 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1486 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1487 # (T.Dickey 98/1/24)
1488 iris-color|xwsh|IRIX ANSI with color,
1490 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1491 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1492 rmul=\E[24m, rs1=\Ec,
1493 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1494 sitm=\E[3m, use=vt100+enq, use=klone+color,
1497 # The following is a version of the ibm-pc entry distributed with PC/IX,
1498 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1499 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1500 # (the former is untrue, and the latter failed under UCB/man); standout and
1501 # underline modes have been added. Note: this entry describes the "native"
1502 # capabilities of the PC monochrome display, without ANY emulation; most
1503 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1507 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1508 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1509 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1512 # (ibmpcx: this entry used to be known as ibmx.
1513 # It formerly included the following extension capabilities:
1514 # :GC=b:GL=v:GR=t:RT=^J:\
1515 # :GH=\E[196g:GV=\E[179g:\
1516 # :GU=\E[193g:GD=\E[194g:\
1517 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1518 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1519 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1520 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1521 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1522 # what was there before. -- esr)
1523 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1526 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1527 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1528 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1529 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1530 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1531 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1537 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1538 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1539 # right corner without triggering a scroll. The ncurses terminfo library can
1540 # handle this case with the <ich1> capability, and prefers <am> for better
1541 # optimization. Bug: The <op> capability resets attributes.
1542 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1543 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1544 qnx|qnx4|qnx console,
1545 daisy, km, mir, msgr, xhpa, xt,
1546 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1547 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1548 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1549 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1550 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1551 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1552 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1553 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1554 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1555 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1556 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1557 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1558 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1559 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1560 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1561 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1562 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1563 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1564 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1565 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1566 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1567 kext=\377\270, kf1=\377\201, kf10=\377\212,
1568 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1569 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1570 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1571 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1572 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1573 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1574 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1575 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1576 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1577 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1578 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1579 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1580 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1581 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1582 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1583 khlp=\377\350, khome=\377\240, khts=\377\342,
1584 kich1=\377\253, kil1=\377\273, kind=\377\261,
1585 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1586 knp=\377\252, knxt=\377\312, kopn=\377\357,
1587 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1588 kprv=\377\302, krdo=\377\336, kref=\377\354,
1589 kres=\377\360, krfr=\377\347, kri=\377\271,
1590 krmir=\377\313, krpl=\377\362, krst=\377\352,
1591 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1592 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1593 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1594 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1595 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1599 qnxt|qnxt4|QNX4 terminal,
1602 qnxm|QNX4 with mouse events,
1604 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1605 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1606 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1607 smicm=\E/>2h, use=qnx4,
1612 # Monochrome QNX4 terminal or console. Setting this terminal type will
1613 # allow an application running on a color console to behave as if it
1614 # were a monochrome terminal. Output will be through stdout instead of
1615 # console writes because the term routines will recognize that the
1616 # terminal name starts with 'qnxt'.
1618 qnxtmono|Monochrome QNX4 terminal or console,
1622 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1623 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1624 # (TD: derive from original qnx4 entry)
1625 qnxt2|qnx 2.15 serial terminal,
1627 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1628 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1630 # QNX ANSI terminal definition
1633 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1634 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1635 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1636 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1637 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1638 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1639 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1640 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1641 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1642 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1643 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1644 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1645 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1646 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1647 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1648 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1649 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1650 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1651 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1652 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1653 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1654 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1655 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1656 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1657 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1658 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1659 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1660 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1661 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1662 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1663 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1664 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1665 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1666 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1667 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1668 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1669 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1670 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1671 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1672 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1673 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1674 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1675 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1676 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1677 smul=\E[4m, tbc=\E[3g,
1678 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1680 qansi|QNX ansi with console writes,
1681 daisy, xhpa, use=qansi-g,
1683 qansi-t|QNX ansi without console writes,
1686 qansi-m|QNX ansi with mouse,
1688 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1689 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1690 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1691 smicm=\E[>2h, use=qansi,
1693 qansi-w|QNX ansi for windows,
1696 #### OpenBSD consoles
1698 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1700 # The following terminal descriptions for the AMD/Intel PC console
1701 # were prepared based on information contained in the OpenBSD-4.9
1702 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1704 # Added bce based on testing with tack -TD
1705 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1706 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1708 pccon+keys|OpenBSD PC keyboard keys,
1709 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1710 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
1711 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1712 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1713 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1715 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1716 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
1717 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
1718 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1719 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1720 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1721 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
1722 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1723 pccon+colors|ANSI colors for OpenBSD PC console,
1726 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1727 pccon+base|base capabilities for OpenBSD PC console,
1728 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1729 cols#80, it#8, lines#24,
1730 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
1731 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
1732 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1733 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1734 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1735 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
1736 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
1737 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1738 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
1739 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1740 use=pccon0-m, use=pccon+colors,
1741 pccon-m|OpenBSD PC console without colors,
1742 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1743 pccon|OpenBSD PC console,
1744 use=pccon-m, use=pccon+colors,
1746 #### NetBSD consoles
1748 # pcvt termcap database entries (corresponding to release 3.31)
1749 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1751 # (For the terminfo master file, I translated these into terminfo syntax.
1752 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1753 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1754 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1756 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1757 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1758 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1759 pcvtXX|pcvt vt200 emulator (DEC VT220),
1760 am, km, mir, msgr, xenl,
1762 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1763 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1764 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1765 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1766 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1767 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1768 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1769 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1770 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1771 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1772 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1773 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1774 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1775 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1776 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1777 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1778 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1779 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1780 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1781 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1783 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1784 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1785 # 50 lines entries; 80 columns
1786 pcvt25|dec vt220 emulation with 25 lines,
1788 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1789 pcvt28|dec vt220 emulation with 28 lines,
1791 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1792 pcvt35|dec vt220 emulation with 35 lines,
1794 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1795 pcvt40|dec vt220 emulation with 40 lines,
1797 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1798 pcvt43|dec vt220 emulation with 43 lines,
1800 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1801 pcvt50|dec vt220 emulation with 50 lines,
1803 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1805 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1806 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1807 # 50 lines entries; 132 columns
1808 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1810 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1811 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1813 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1814 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1816 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1817 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1819 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1820 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1822 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1823 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1825 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1827 # OpenBSD implements a color variation
1828 pcvt25-color|dec vt220 emulation with 25 lines and color,
1830 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1831 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1832 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1833 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1834 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1837 # Terminfo entries to enable the use of the ncurses library in colour on a
1838 # NetBSD-arm32 console (only tested on a RiscPC).
1839 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1840 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1841 # typo in invis - TD
1842 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1843 am, bce, msgr, xenl, xon,
1844 cols#80, it#8, lines#30,
1845 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1846 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1847 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1848 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1849 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1850 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1851 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1852 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1853 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1854 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1855 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1856 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1857 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1858 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1859 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1861 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1862 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1863 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1866 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1867 cols#132, lines#50, use=arm100,
1869 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1870 # manufactured by Sharp for the Japenese market.
1871 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1872 x68k|x68k-ite|NetBSD/x68k ITE,
1874 kclr=\E[9~, khlp=\E[28~, use=vt220,
1877 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1879 # (still unfinished, but good enough so far.)
1880 ofcons|DNARD OpenFirmware console,
1883 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
1884 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1885 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1886 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1887 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1888 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1889 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1890 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1891 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1892 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1893 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1894 rmso=\2330m, rmul=\2330m,
1895 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
1896 sgr0=\2330m, smso=\2337m, smul=\2334m,
1898 # NetBSD "wscons" emulator in vt220 mode.
1899 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1900 # The emulator renders underlined text in red. Colors are otherwise usable.
1902 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1903 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1904 # vt220 screens in vttest do not work with this emulator. For instance, it
1905 # identifies itself (primary DA response) as a vt220 with selective erase. But
1906 # the selective erase feature does not work. The secondary response is copied
1907 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1908 # the level of detail in a termcap, it is a passable emulator, since ECH does
1909 # work. Don't use it on a VMS system -TD
1910 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1912 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1913 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1914 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1915 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1916 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1917 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1918 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1920 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1923 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1925 rcons|BSD rasterconsole,
1927 # Color version of above. Color currently only provided by NetBSD.
1928 rcons-color|BSD rasterconsole with ANSI color,
1931 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1933 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1934 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1935 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1936 # -- compare with cons25w
1938 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1939 colors#8, cols#80, it#8, lines#18, pairs#64,
1940 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1941 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1942 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1943 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1944 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1945 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1946 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1947 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1948 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1949 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1950 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1951 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1952 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1953 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1954 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1955 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1957 #### FreeBSD console entries
1959 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1960 # Andrey Chernov maintains the FreeBSD termcap distributions.
1962 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1963 # or comment out the :cb: capability in the console entry.
1965 # Alexander Lukyanov reports:
1966 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1967 # Now el1 clears not only to the line beginning, but also a large chunk
1968 # of previous line. But there is another bug - ech does not work at all.
1972 # common entry without semigraphics
1973 # Bug: The <op> capability resets attributes.
1974 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1975 # instance el1 does if the cursor is moved to the right margin first. Removed
1976 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1978 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1979 # Note that this disables standout with color.
1981 # The emulator sends difference strings based on shift- and control-keys,
1983 # F13-F24 are shifted F1-F12
1984 # F25-F36 are control F1-F12
1985 # F37-F48 are shift+control F1-F12
1986 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1987 am, bce, bw, eo, msgr, npc,
1988 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1989 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1990 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1991 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1992 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1993 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1994 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1995 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1996 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1997 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1998 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1999 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2000 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2001 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2002 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2003 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2004 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2005 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2006 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2007 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2008 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2009 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2010 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2011 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2012 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2013 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2014 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2015 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2017 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2018 kbs=\177, kdch1=\E[3~, use=cons25,
2019 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2021 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2022 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2023 smul=\E[4m, use=cons25,
2024 cons30|ansi80x30|freebsd console (30-line ansi mode),
2025 lines#30, use=cons25,
2026 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2027 lines#30, use=cons25-m,
2028 cons43|ansi80x43|freebsd console (43-line ansi mode),
2029 lines#43, use=cons25,
2030 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2031 lines#43, use=cons25-m,
2032 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2033 lines#50, use=cons25,
2034 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2035 lines#50, use=cons25-m,
2036 cons60|ansi80x60|freebsd console (60-line ansi mode),
2037 lines#60, use=cons25,
2038 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2039 lines#60, use=cons25-m,
2040 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2041 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2043 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2045 op@, rmul=\E[m, setab@, setaf@,
2046 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2047 smul=\E[4m, use=cons25r,
2048 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2049 lines#50, use=cons25r,
2050 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2051 lines#50, use=cons25r-m,
2052 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2053 lines#60, use=cons25r,
2054 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2055 lines#60, use=cons25r-m,
2056 # ISO 8859-1 FreeBSD console
2057 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2058 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2060 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2062 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2063 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2064 smul=\E[4m, use=cons25l1,
2065 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2066 lines#50, use=cons25l1,
2067 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2068 lines#50, use=cons25l1-m,
2069 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2070 lines#60, use=cons25l1,
2071 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2072 lines#60, use=cons25l1-m,
2074 #### 386BSD and BSD/OS Consoles
2077 # This was the original 386BSD console entry (I think).
2078 # Some places it's named oldpc3|oldibmpc3.
2079 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2080 origpc3|origibmpc3|IBM PC 386BSD Console,
2081 OTbs, am, bw, eo, xon,
2083 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2084 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2085 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2086 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2087 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2088 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2089 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2091 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2092 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2095 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2096 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2097 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2098 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2100 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2101 # Note, the emulator supports many of the additional console features
2102 # listed in the iBCS2 (e.g. character-set selection) though not all
2103 # are described here. This entry really ought to be upgraded.
2104 # Also note, the console will also work with fewer lines after doing
2105 # "stty rows NN", e.g. to use 24 lines.
2106 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2107 # Bug: The <op> capability resets attributes.
2108 bsdos-pc|IBM PC BSD/OS Console,
2109 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2110 use=bsdos-pc-nobold,
2112 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2113 use=klone+color, use=bsdos-pc-m,
2115 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2116 OTbs, am, eo, km, xon,
2117 cols#80, it#8, lines#25,
2118 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2119 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2120 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2121 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2122 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2123 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2124 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2125 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2128 # Old names for BSD/OS PC console used in releases before 4.1.
2129 pc3|BSD/OS on the PC Console,
2130 use=bsdos-pc-nobold,
2131 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2134 # BSD/OS on the SPARC
2135 bsdos-sparc|Sun SPARC BSD/OS Console,
2138 # BSD/OS on the PowerPC
2139 bsdos-ppc|PowerPC BSD/OS Console,
2143 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2145 # Actually (TD pointed this out at the time the acsc string was added):
2146 # vt52 shouldn't define full acsc since most of the cells don't match.
2147 # see vt100 manual page A-31. This is the list that does match:
2156 # The line-drawing happens to work in several terminal emulators, but should
2157 # not be used as a guide to the capabilities of the vt52. Note in particular
2158 # that vt52 does not support line-drawing characters (the scan-X values refer
2159 # to a crude plotting feature) -TD
2162 cols#80, it#8, lines#24,
2163 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2164 cub1=\ED, cud1=\EB, cuf1=\EC,
2165 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2166 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2167 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2169 #### DEC VT100 and compatibles
2171 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2172 # and micro consoles can be found in the `obsolete' section. More details on
2173 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2174 # found near the end of this file.
2176 # Except where noted, these entries are DEC's official terminfos.
2177 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2178 # Engineering for more information. Updated terminfos and termcaps
2179 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2181 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2182 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2183 # its name to Boundless Technologies; see http://www.boundless.com.
2186 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2187 # certainly includes what DEC called the `Level 1 editing extension' codes;
2188 # only the very oldest VT100s lacked these and there probably aren't any of
2189 # those left alive. To capture these, use one of the VT102 entries.
2191 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2192 # since the cursor is left in a different position while in the
2193 # weird state (concept at beginning of next line, vt100 at end
2194 # of this line) so all versions of vi before 3.7 don't handle
2195 # <xenl> right on vt100. The correct way to handle <xenl> is when
2196 # you output the char in column 80, immediately output CR LF
2197 # and then assume you are in column 1 of the next line. If <xenl>
2198 # is on, am should be on too.
2200 # I assume you have smooth scroll off or are at a slow enough baud
2201 # rate that it doesn't matter (1200? or less). Also this assumes
2202 # that you set auto-nl to "on", if you set it off use vt100-nam
2205 # The padding requirements listed here are guesses. It is strongly
2206 # recommended that xon/xoff be enabled, as this is assumed here.
2208 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2209 # tab settings are in non-volatile memory and don't need to be
2210 # reset upon login. Also setting the number of columns glitches
2211 # the screen annoyingly. You can type "reset" to get them set.
2213 # The VT100 series terminals have cursor ("arrows") keys which can operate
2214 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2215 # is the reset state, and is assumed to be the normal state. Application
2216 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2217 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2218 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2219 # was provided primarily as an aid to the porting of VT52 applications. It is
2220 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2221 # applications such as vi will always transmit the <smkx> string. Therefore,
2222 # the definitions for the cursor keys are made to match what the terminal
2223 # transmits after the <smkx> string is transmitted. If the <smkx> string
2224 # is a null string or is not defined, then cursor keys are assumed to be in
2225 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2226 # else the application may fail. It is also expected that applications will
2227 # always transmit the <rmkx> string to the terminal before they exit.
2229 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2230 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2231 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2232 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2233 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2234 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2235 # Enter key transmits the same as the Return key (Note: the Return key
2236 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2237 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2238 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2239 # is normally in Numeric Mode. If an application requires that the keypad be
2240 # in Application Mode then it is expected that the user, or the application,
2241 # will set the TERM environment variable to point to a terminfo entry which has
2242 # defined the <smkx> string to include the codes that switch the keypad into
2243 # Application Mode, and the terminfo entry will also define function key
2244 # fields to match the Application Mode control codes. If the <smkx> string
2245 # is a null string or is not defined, then the keypad is assumed to be in
2246 # Numeric Mode. If the <smkx> string switches the keypad into Application
2247 # Mode, it is expected that the <rmkx> string will contain the control codes
2248 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2249 # applications which transmit the <smkx> string will also always transmit the
2250 # <rmkx> string to the terminal before they exit.
2252 # Here's a diagram of the VT100 keypad keys with their bindings.
2253 # The top line is the name of the key (some DEC keyboards have the keys
2254 # labelled somewhat differently, like GOLD instead of PF1, but this is
2255 # the most "official" name). The second line is the escape sequence it
2256 # generates in Application Keypad mode (where "$" means the ESC
2257 # character). The third line contains two items, first the mapping of
2258 # the key in terminfo, and then in termcap.
2259 # _______________________________________
2260 # | PF1 | PF2 | PF3 | PF4 |
2261 # | $OP | $OQ | $OR | $OS |
2262 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2264 # | $Ow | $Ox | $Oy | $Om |
2265 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2267 # | $Ot | $Ou | $Ov | $Ol |
2268 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2270 # | $Oq | $Or | $Os | enter |
2271 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2274 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2276 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2277 # terminfo guidelines. That is a compromise used to assign the remaining
2278 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2280 vt100+keypad|dec vt100 numeric keypad no fkeys,
2281 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2282 vt100+pfkeys|dec vt100 numeric keypad,
2283 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2285 vt100+fnkeys|dec vt100 numeric keypad,
2286 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2287 kf9=\EOw, use=vt100+pfkeys,
2289 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2290 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2291 # use the 5-key arrangement to model the arrow keys as suggested in the
2292 # terminfo guidelines:
2293 # _______________________________________
2294 # | PF1 | PF2 | PF3 | PF4 |
2295 # | $OP | $OQ | $OR | $OS |
2296 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2298 # | $Ow | $Ox | $Oy | $Om |
2299 # |_ka1__K1_|_________|_ka3__K3_|_________|
2301 # | $Ot | $Ou | $Ov | $Ol |
2302 # |_________|_kb2__K2_|_________|_________|
2304 # | $Oq | $Or | $Os | enter |
2305 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2308 # |___________________|_________|_kent_@8_|
2310 vt220+keypad|dec vt220 numeric keypad,
2311 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2312 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2315 vt100+enq|ncurses extension for vt100-style ENQ,
2316 u8=\E[?1;2c, use=ansi+enq,
2317 vt102+enq|ncurses extension for vt102-style ENQ,
2318 u8=\E[?6c, use=ansi+enq,
2320 # And here, for those of you with orphaned VT100s lacking documentation, is
2321 # a description of the soft switches invoked when you do `Set Up'.
2323 # Scroll 0-Jump Shifted 3 0-#
2324 # | 1-Smooth | 1-British pound sign
2325 # | Autorepeat 0-Off | Wrap Around 0-Off
2327 # | | Screen 0-Dark Bkg | | New Line 0-Off
2328 # | | | 1-Light Bkg | | | 1-On
2329 # | | | Cursor 0-Underline | | | Interlace 0-Off
2330 # | | | | 1-Block | | | | 1-On
2332 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2334 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2335 # | | | 1-On | | | 1-50 Hz
2336 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2337 # | | 1-ANSI | | 1-8 Bits
2338 # | Keyclick 0-Off | Parity 0-Off
2340 # Margin Bell 0-Off Parity Sense 0-Odd
2343 # The following SET-UP modes are assumed for normal operation:
2344 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2345 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2346 # Other SET-UP modes may be set for operator convenience or communication
2347 # requirements; I recommend
2348 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2349 # Unless you have a graphics add-on such as Digital Engineering's VT640
2350 # (and even then, whenever it can be arranged!) you should set
2353 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2354 vt100|vt100-am|dec vt100 (w/advanced video),
2355 OTbs, am, mc5i, msgr, xenl, xon,
2356 cols#80, it#8, lines#24, vt#3,
2357 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2358 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2359 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2360 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2361 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2362 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2363 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2364 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2365 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2366 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2367 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2368 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2369 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2370 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2371 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2372 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2374 vt100nam|vt100-nam|vt100 no automargins,
2375 am@, xenl@, use=vt100-am,
2376 vt100-vb|dec vt100 (w/advanced video) & no beep,
2377 bel@, flash=\E[?5h\E[?5l, use=vt100,
2379 # Ordinary vt100 in 132 column ("wide") mode.
2380 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2382 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2383 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2384 cols#132, lines#14, vt@,
2385 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2387 # vt100 with no advanced video.
2388 vt100-nav|vt100 without advanced video option,
2390 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2392 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2393 cols#132, lines#14, use=vt100-nav,
2395 # vt100 with one of the 24 lines used as a status line.
2396 # We put the status line on the top.
2397 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2400 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2401 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2402 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2403 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2405 # Status line at bottom.
2406 # Clearing the screen will clobber status line.
2407 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2410 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2411 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2413 # Most of the `vt100' emulators out there actually emulate a vt102
2414 # This entry (or vt102-nsgr) is probably the right thing to use for
2417 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2419 vt102-w|dec vt102 in wide mode,
2421 rs3=\E[?3h, use=vt102,
2423 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2424 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2425 # string in the canonical vt100 entry above leaves the screen littered
2426 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2427 # after highlight turnoffs. This entry should fix that, and even leave
2428 # ACS support working, at the cost of making multiple-highlight changes
2429 # slightly more expensive.
2430 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2431 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2432 sgr@, sgr0=\E[m, use=vt102,
2434 # VT125 Graphics CRT. Clear screen also erases graphics
2435 # Some vt125's came configured with vt102 support.
2436 vt125|vt125 graphics terminal,
2438 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2440 # This isn't a DEC entry, it came from University of Wisconsin.
2441 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2444 cols#80, it#8, lines#24, vt#3,
2445 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2446 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2447 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2448 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2449 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2450 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2451 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2452 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2453 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2455 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2456 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2457 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2459 # vt132 - like vt100 but slower and has ins/del line and such.
2460 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2461 # manual and from the ANSI standard, this describes the actual
2462 # terminal. I've never actually used a vt132 myself, so this
2467 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2468 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2470 # This vt220 description maps F5--F9 to the second block of function keys
2471 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2472 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2473 # PF1--PF4 are used as F1--F4.
2476 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2477 OTbs, OTpt, am, mir, msgr, xenl, xon,
2478 cols#80, lines#24, vt#3,
2480 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2481 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2482 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2483 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2484 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2485 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2486 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2487 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2488 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2489 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2490 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2491 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2492 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2493 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2494 rmso=\E[27m, rmul=\E[24m,
2495 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2496 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2497 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2498 smso=\E[7m, smul=\E[4m,
2500 # A much better description of the VT200/220; used to be vt220-8
2501 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2502 # designation to accommodate bug in pcvt -TD
2504 # Here's a picture of the VT220 editing keypad:
2505 # +--------+--------+--------+
2506 # | Find | Insert | Remove |
2507 # +--------+--------+--------+
2508 # | Select | Prev | Next |
2509 # +--------+--------+--------+
2510 vt220|vt200|dec vt220,
2511 OTbs, am, mir, msgr, xenl, xon,
2512 cols#80, it#8, lines#24, vt#3,
2513 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2514 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2515 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2516 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2517 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2518 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2519 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2520 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2521 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2522 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2523 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2524 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2525 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2526 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2527 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2528 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2529 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2530 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2531 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2532 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2534 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2535 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2536 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2538 vt220-w|vt200-w|DEC vt220 in wide mode,
2540 rs3=\E[?3h, use=vt220,
2541 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2542 OTbs, am, mc5i, mir, msgr, xenl, xon,
2543 cols#80, it#8, lines#24, vt#3,
2544 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2545 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2546 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2547 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2548 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2549 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2550 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2551 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2552 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2553 il=\233%p1%dL, il1=\233L, ind=\ED,
2554 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2555 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2556 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2557 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2558 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2559 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2560 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2561 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2562 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2563 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2564 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2565 rmul=\23324m, rs1=\233?3l, sc=\E7,
2566 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2567 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2568 smso=\2337m, smul=\2334m, tbc=\2333g,
2571 # This vt220 description regards F6--F10 as the second block of function keys
2572 # at the top of the keyboard. This mapping follows the description given
2573 # in the VT220 Programmer Reference Manual and agrees with the labeling
2574 # on some terminals that emulate the vt220. There is no support for an F5.
2575 # See vt220 for an alternate mapping.
2577 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2578 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2579 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2580 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2581 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2583 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2585 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2587 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2588 # (not an official DEC entry!)
2589 # The problem with real vt220 terminals is they don't send escapes when in
2590 # in vt220 mode. This can be gotten around two ways. 1> don't send
2591 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2592 # features of vt100 advanced video which it then has.
2594 # This entry takes the view of putting a vt220 into vt100 mode so
2595 # you can use the escape key in emacs and everything else which needs it.
2597 # You probably don't want to use this on a VMS machine since VMS will think
2598 # it has a vt220 and will get fouled up coming out of emacs
2600 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2601 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2603 vt200-js|vt220-js|dec vt200 series with jump scroll,
2606 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2607 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2608 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2609 ht=^I, il1=\E[L, ind=\ED,
2610 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2611 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2612 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2613 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2614 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2615 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2616 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2618 # This was DEC's vt320. Use the purpose-built one below instead
2619 #vt320|DEC VT320 in vt100 emulation mode,
2622 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2624 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2626 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2628 # These entries are not DEC's official ones, they were purpose-built for the
2629 # VT320. Here are the designer's notes:
2630 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2631 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2632 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2633 # Things that use <knxt> usually use tab anyways... and things that don't use
2634 # tab usually use <knxt> instead...
2635 # kprv is same as tab - Backtab is useless...
2636 # I left out <sgr> because of its RIDICULOUS complexity,
2637 # and the resulting fact that it causes the termcap translation of the entry
2638 # to SMASH the 1k-barrier...
2639 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2640 # (vt320: uncommented <fsl> --esr)
2641 vt320|vt300|dec vt320 7 bit terminal,
2642 am, hs, mir, msgr, xenl,
2643 cols#80, lines#24, wsl#80,
2644 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2645 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2646 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2647 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2648 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2649 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2650 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2651 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2652 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2653 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2654 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2655 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2656 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2657 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2658 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2659 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2660 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2661 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2662 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2664 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2666 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2667 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2668 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2669 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2670 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2672 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2673 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2675 # We have to init 132-col mode, not 80-col mode.
2676 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2678 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2679 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2681 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2683 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2684 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2687 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2688 # which are pretty much a superset of the VT320. They have the
2689 # host writable status line, yet another different DRCS matrix size,
2690 # and such, but they add the DEC Technical character set, Multiple text
2691 # pages, selectable length pages, and the like. The difference between
2692 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2693 # monitor, the former has 4 planes and a color monitor. These terminals
2694 # support VT131 and ANSI block mode, but as with much of these things,
2695 # termcap/terminfo doesn't deal with these features.
2697 # Note that this entry is are set up in what was the standard way for GNU
2698 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2699 # keys were switched into application mode at the same time the numeric pad
2700 # is switched into application mode. This changes the definitions of the
2701 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2702 # your termcap or terminfo entry,
2704 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2705 # (vt340: string capability "sb=\E[M" corrected to "sr";
2706 # also, added <rmam>/<smam> based on the init string -- esr)
2707 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2708 am, eslok, hs, mir, msgr, xenl, xon,
2709 cols#80, it#8, lines#24, vt#3,
2710 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2711 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2712 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2713 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2714 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2715 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2716 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2717 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2718 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2720 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2721 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2722 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2723 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2724 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2725 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2726 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2727 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2728 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2729 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2730 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2731 tsl=\E[2$~\E[1$}\E[1;%dH,
2733 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2734 # (originally written with vt420 as its primary name, and usable for it).
2736 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2737 # text pages and long text pages with selectable length of the vt340, along
2738 # with left and right margins, rectangular area text copy, fill, and erase
2739 # operations, selected region character attribute change operations,
2740 # page memory and rectangle checksums, insert/delete column, reception
2741 # macros, and other features too numerous to remember right now. TERMCAP
2742 # can only take advantage of a few of these added features.
2744 # Note that this entry is are set up in what was the standard way for GNU
2745 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2746 # keys were switched into application mode at the same time the numeric pad
2747 # is switched into application mode. This changes the definitions of the
2748 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2749 # your termcap entry,
2751 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2752 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2753 # also, added <rmam>/<smam> based on the init string -- esr)
2754 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2755 am, eslok, hs, mir, msgr, xenl, xon,
2756 cols#80, it#8, lines#24, vt#3,
2757 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2758 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2759 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2760 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2761 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2762 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2763 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2764 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2765 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2766 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2767 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2768 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2769 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2770 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2771 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2772 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2773 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2774 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2775 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2776 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2777 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2778 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2779 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2781 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2782 # a missing <sc> -- esr)
2783 # add msgr and other capabilities from vt220 -TD
2785 am, mir, msgr, xenl, xon,
2786 cols#80, it#8, lines#24, vt#3,
2787 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2788 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2789 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2790 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2791 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2792 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2793 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2794 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2795 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2796 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2797 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2798 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2799 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2800 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2801 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2802 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2803 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2804 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2805 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2806 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2807 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2808 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2809 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2810 use=ansi+pp, use=dec+sl, use=ansi+enq,
2812 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2813 # takes two parameters, the key and the string. Translating the key is
2814 # straightforward (keys 1-5 are not defined on real terminals, though some
2815 # emulators define these):
2817 # if (key < 16) then value = key;
2818 # else if (key < 21) then value = key + 1;
2819 # else if (key < 25) then value = key + 2;
2820 # else if (key < 27) then value = key + 3;
2821 # else if (key < 30) then value = key + 4;
2822 # else value = key + 5;
2824 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2825 # There's no provision in terminfo for emitting a string in this format, so the
2826 # application has to know it.
2828 vt420pc|DEC VT420 w/PC keyboard,
2829 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2830 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2831 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2832 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2833 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2834 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2835 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2836 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2837 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2838 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2839 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2840 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2841 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2842 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2843 pctrm=USR_TERM\:vt420pcdos\:,
2844 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2847 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2849 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2851 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2852 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2854 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2855 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2856 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2857 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2858 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2859 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2860 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2865 vt510pc|DEC VT510 w/PC keyboard,
2867 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2872 # The VT520 is a monochrome text terminal capable of managing up to
2873 # four independent sessions in the terminal. It has multiple ANSI
2874 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2875 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2876 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2878 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2879 # [Alt]/[Print Screen] depending upon which keyboard and which
2880 # terminal mode is being used. If Set-Up has been disabled or
2881 # assigned to an unknown key, Set-Up may be entered by pressing
2882 # [F3] as the first key after power up, regardless of keyboard type.
2884 use=ansi+rca, use=vt420, use=ansi+tabs,
2889 #### VT100 emulations
2892 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2893 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2894 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2895 # that this works best with a stock vt100 entry.
2896 dec-vt100|EWAN telnet's vt100 emulation,
2899 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2900 dec-vt220|DOS tnvt200 terminal emulator,
2903 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2904 # anyone who needs PC VT340 emulation. (or anything below that level, for
2905 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2906 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2907 # I can send the address if requested.
2908 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2909 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2910 z340|zstem vt340 terminal emulator 132col 42line,
2912 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2913 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2915 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2917 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2918 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2921 # CRT is shareware. It implements some xterm features, including mouse.
2922 crt|crt-vt220|CRT 2.3 emulating VT220,
2925 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2927 # PuTTY 0.55 (released 3 August 2004)
2928 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2930 # Comparing with 0.51, vttest is much better (only a few problems with the
2931 # cursor position reports and wrapping).
2933 # PuTTY 0.51 (released 14 December 2000)
2935 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2936 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2937 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2938 # to xterm, which is incorrect, since several features are misimplemented:
2940 # Alt+key always sends ESC+key, so 'km' capability is removed.
2942 # Control responses, wrapping and tabs are buggy, failing a couple of
2943 # screens in vttest.
2945 # xterm mouse support is not implemented (unrelease version may).
2947 # Several features such as backspace/delete are optional; this entry documents
2948 # the default behavior -TD
2950 putty|PuTTY terminal emulator,
2951 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
2952 colors#8, it#8, ncv#22, pairs#64, U8#1,
2953 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2954 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2955 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2956 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2957 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2958 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2959 dch=\E[%p1%dP, dch1=\E[P,
2960 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2961 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2962 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
2963 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
2964 ind=^J, indn=\E[%p1%dS,
2965 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2966 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2967 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2968 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
2969 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
2970 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
2971 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
2972 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
2973 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2974 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2975 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2976 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2977 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2978 rmso=\E[27m, rmul=\E[24m,
2979 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2980 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2981 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2982 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2983 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2984 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2985 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, use=xterm+sl,
2986 vt100-putty|Reset PuTTY to pure vt100,
2987 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2989 # palette is hardcoded...
2990 putty-256color|PuTTY 0.58 with xterm 256-colors,
2991 initc@, use=xterm+256color, use=putty,
2993 # One of the keyboard selections is "VT100+".
2994 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2995 putty-vt100|VT100+ keyboard layout,
2996 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2997 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2998 kf9=\EOX, use=putty,
3000 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3002 # Use modifiers to obtain function keys past 12:
3005 # F25-F36 - control/alt
3006 # F37-F48 - control/shift
3008 putty-sco|putty with SCO function keys,
3009 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3010 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3011 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3012 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3013 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3014 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3015 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3016 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3017 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3018 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3019 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3020 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3022 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3023 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3024 # (communication program) which supports:
3026 # - Serial port connections.
3027 # - TCP/IP (telnet) connections.
3028 # - VT100 emulation, and selected VT200/300 emulation.
3029 # - TEK4010 emulation.
3030 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3032 # - Scripts using the "Tera Term Language".
3033 # - Japanese and Russian character sets.
3035 # The program does not come with terminfo or termcap entries. However, the
3036 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3037 # vt52 or doublesize character support; blinking is done with color). Besides
3038 # the HPA, VPA extensions it also implements CPL and CNL.
3040 # All of the function keys can be remapped. This description shows the default
3041 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3042 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3043 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3051 # ANSI colors are implemented, but cannot be combined with video attributes
3052 # except for reverse.
3054 # No fonts are supplied with the program, so the acsc string is chosen to
3055 # correspond with the default Microsoft terminal font.
3057 # Tera Term recognizes some xterm sequences, including those for setting and
3058 # retrieving the window title, and for setting the window size (i.e., using
3059 # "resize -s"), though it does not pass SIGWINCH to the application if the
3060 # user resizes the window with the mouse.
3061 teraterm2.3|Tera Term Pro,
3064 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3065 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3066 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3067 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3068 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3069 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3070 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3071 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3072 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3073 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3074 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3075 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3076 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3077 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3078 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3079 use=klone+color, use=vt100,
3081 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3082 # to choose a Windows OEM font).
3084 # Testing with tack:
3085 # - it does not have xenl (suppress that)
3086 # - underline seems to work with color (modify ncv).
3087 # Testing with vttest:
3088 # - wrapping differs from vt100 (menu 1).
3089 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3091 # - it recognizes the dtterm window controls for reporting size in
3092 # characters and pixels.
3093 # - it passes SIGWINCH.
3094 teraterm4.59|Tera Term Pro,
3097 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3098 kmous=\E[M, use=teraterm2.3,
3103 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3104 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3107 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3108 # for casual (occasional) use. Also fails several of the vttest screens,
3109 # but that is not unusual for vt100 "emulators".
3110 # b) Does not implement vt100 keypad
3111 # c) Recognizes a subset of vt52 controls.
3112 ms-vt100|MS telnet imitating dec vt100,
3114 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3115 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3116 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3118 # Tested with Windows 2000, the telnet application runs in a console window,
3119 # also using 'Terminal' font.
3122 # a) This version has no function keys or numeric keypad. Unlike the older
3123 # version, the numeric keypad is entirely ignored.
3124 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3125 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3127 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3130 # Based on comments from Federico Bianchi:
3132 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3133 # scheme for PF keys.
3135 # and PuTTY wishlist:
3137 # The modifiers are represented as the codes listed above, prefixed to
3138 # the normal sequences. If the modifier is pressed alone, its sequence
3139 # is transmitted twice in succession. If multiple modifiers apply,
3140 # they're transmitted in the order shift, control, alt.
3145 ms-vt100+|vt100+|windows XP vt100+ (sic),
3146 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3147 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3148 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3149 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3150 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3151 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3152 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3153 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3154 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3155 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3156 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3157 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3158 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3159 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3160 knp=\E/, kpp=\E?, use=ms-vt100-color,
3162 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3165 # expect-5.44.1.15/example/tkterm
3166 # a minimal subset of a vt100 (compare with "news-unk).
3168 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3169 tt|tkterm|Don Libes' tk text widget terminal emulator,
3170 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3171 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3172 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3173 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3176 ######## X TERMINAL EMULATORS
3179 # You can add the following line to your .Xdefaults to change the terminal type
3180 # set by the xterms you start up to my-xterm:
3182 # *termName: my-xterm
3184 # System administrators can change the default entry for xterm instances
3185 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3186 # case, xterm will detect and reject an invalid terminal type, falling back
3187 # to the default of xterm.
3190 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3191 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3192 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3193 # as these seem not to work -- esr)
3194 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3195 OTbs, am, km, mir, msgr, xenl, xon,
3196 cols#80, it#8, lines#65,
3197 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3198 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3199 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3200 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3201 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3202 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3203 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3204 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3205 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3206 smso=\E[7m, smul=\E[4m,
3207 # Compatible with the R5 xterm
3208 # (from the XFree86 3.2 distribution, <blink=@> removed)
3209 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3210 # corrected typos in rs2 string - TD
3212 xterm-r5|xterm R5 version,
3213 OTbs, am, km, msgr, xenl,
3214 cols#80, it#8, lines#24,
3215 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3216 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3217 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3218 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3219 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3220 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3221 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3222 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3223 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3224 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3225 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3226 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3227 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3228 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3230 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3232 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3233 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3234 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3235 # Compatible with the R6 xterm
3236 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3237 # added khome/kend, hts based on the R6 xterm code - TD
3238 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3239 # for compatibility with other emulators).
3240 xterm-r6|xterm-old|xterm X11R6 version,
3241 OTbs, am, km, mir, msgr, xenl,
3242 cols#80, it#8, lines#24,
3243 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3244 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3245 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3246 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3247 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3248 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3249 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3251 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3252 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3253 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3254 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3255 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3256 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3257 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3258 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3259 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3260 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3261 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3262 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3263 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3264 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3266 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3267 # The name has been changed and some aliases have been removed.
3268 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3269 OTbs, am, bce, km, mir, msgr, xenl, XT,
3270 cols#80, it#8, lines#24, ncv@,
3271 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3272 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3273 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3274 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3275 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3276 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3277 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3278 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3279 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3280 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3282 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3283 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3284 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3285 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3286 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3287 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3288 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3289 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3290 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3291 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3292 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3293 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3294 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3295 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3296 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3297 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3298 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3299 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3300 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3301 use=ecma+color, use=vt220+keypad,
3303 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3304 # codes for F1-F4 except while in VT220 mode.
3305 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3306 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3308 # This version was released in XFree86 3.3.3 (November 1998).
3309 # Besides providing printer support, it exploits a new feature that allows
3310 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3311 # -- the distribution contained incorrect khome/kend values -TD
3312 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3313 blink=\E[5m, ich1@, invis=\E[8m,
3314 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3315 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3316 rs2=\E[!p\E[?3;4l\E[4l\E>,
3317 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3318 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3321 # This version was released in XFree86 4.0.
3322 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3324 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3325 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3326 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3327 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3328 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3329 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3330 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3331 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3332 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3333 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3334 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3335 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3336 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3337 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3338 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3339 smcup=\E[?1049h, use=xterm-xf86-v333,
3341 # This version was released in XFree86 4.3.
3342 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3343 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3344 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3346 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3349 # This version was released in XFree86 4.4.
3350 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3351 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3352 rin=\E[%p1%dT, use=xterm-xf86-v43,
3354 xterm-xfree86|xterm terminal emulator (XFree86),
3357 # This version reflects the current xterm features.
3358 xterm-new|modern xterm terminal emulator,
3360 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3361 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3364 # This fragment is for people who cannot agree on what the backspace key
3366 xterm+kbs|fragment for backspace key,
3369 # This fragment describes as much of XFree86 xterm's "pc-style" function
3370 # keys as will fit into terminfo's 60 function keys.
3373 # ---------------------------------
3380 # 8 Shift + Alt + Control
3381 # ---------------------------------
3382 # The meta key may also be used as a modifier in this scheme, adding another
3383 # bit to the parameter.
3384 xterm+pcfkeys|fragment for PC-style fkeys,
3385 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3388 xterm+noapp|fragment with cursor keys in normal mode,
3389 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3392 xterm+app|fragment with cursor keys in application mode,
3393 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3396 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3397 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3398 # the earlier scheme, as noted in the "use=" clauses in this file.
3400 # The original assignments from patch #94 for cursor-keys had some technical
3403 # A parameter for a function-key to represent a modifier is just more
3404 # bits. But for a cursor-key it may change the behavior of the
3405 # application. For instance, emacs decodes the first parameter of a
3406 # cursor-key as a repeat count.
3408 # A parameterized string should (really) not begin with SS3 (\EO).
3409 # Rather, CSI (\E[) should be used.
3411 # For these reasons, the original assignments were deprecated. For
3412 # compatibility reasons, they are still available as a setting of xterm's
3413 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3414 # that might apply to xterm+pcfkeys with different values of that resource.
3415 xterm+pcc3|fragment with modifyCursorKeys:3,
3416 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3417 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3418 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3419 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3420 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3421 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3422 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3423 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3426 xterm+pcc2|fragment with modifyCursorKeys:2,
3427 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3428 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3429 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3430 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3431 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3432 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3433 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3435 xterm+pcc1|fragment with modifyCursorKeys:1,
3436 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3437 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3438 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3439 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3440 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3441 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3443 xterm+pcc0|fragment with modifyCursorKeys:0,
3444 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3445 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3446 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3447 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3448 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3449 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3452 # Here are corresponding fragments from xterm patch #216:
3454 xterm+pcf0|fragment with modifyFunctionKeys:0,
3455 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3456 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3457 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3458 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3459 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3460 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3461 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3462 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3463 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3464 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3465 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3466 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3467 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3468 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3469 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3470 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3471 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3473 xterm+pcf2|fragment with modifyFunctionKeys:2,
3474 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3475 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3476 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3477 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3478 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3479 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3480 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3481 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3482 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3483 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3484 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3485 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3486 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3487 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3488 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3489 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3490 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3491 kf8=\E[19~, kf9=\E[20~,
3493 # Chunks from xterm #230:
3494 xterm+pce2|fragment with modifyCursorKeys:2,
3495 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3496 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3497 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3498 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3499 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3500 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3501 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3502 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3503 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3504 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3505 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3508 xterm+edit|fragment for 6-key editing-keypad,
3509 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3512 xterm+pc+edit|fragment for pc-style editing keypad,
3513 kend=\E[4~, khome=\E[1~,
3515 xterm+vt+edit|fragment for vt220-style editing keypad,
3516 kfnd=\E[1~, kslt=\E[4~,
3519 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3520 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3521 # is shown here (because that is used in mrxvt and mlterm):
3522 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3523 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3524 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3525 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3526 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3527 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3528 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3529 kf63=\E[13;4~, use=xterm+pcf2,
3531 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3532 xterm-basic|modern xterm terminal emulator - common,
3533 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
3534 colors#8, cols#80, it#8, lines#24, pairs#64,
3535 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3536 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3537 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3538 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3539 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3540 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3541 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3542 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3543 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3544 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3545 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
3546 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
3547 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
3548 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
3549 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
3550 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
3552 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3553 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3554 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3555 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3556 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3557 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+pp,
3558 use=xterm+kbs, use=vt100+enq,
3560 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3561 # In retrospect, something like xterm-r6 was intended here -TD
3562 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3563 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3565 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3566 # If configured to support 88- or 256-colors (which is fairly common in 2009),
3567 # xterm also recognizes the control sequences for initc -TD
3568 xterm-16color|xterm with 16 colors like aixterm,
3570 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3571 use=ibm+16color, use=xterm-new,
3573 # 256-colors is a compile-time feature of XFree86 xterm beginning with
3574 # patch #111 (1999/7/10) -TD
3575 xterm+256color|xterm 256-color feature,
3577 colors#256, pairs#32767,
3578 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3579 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3580 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3583 # 88-colors is a compile-time feature of XFree86 xterm beginning with
3584 # patch #115 (1999/9/18) -TD
3586 # Note that the escape sequences used are the same as for 256-colors - xterm
3587 # has a different table of default color resource values. If built for
3588 # 256-colors, it can still handle an 88-color palette by using the initc
3591 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3592 # which support the xterm+256color feature support the associated initc
3593 # capability. So it is cancelled in the entries which use this and/or the
3594 # xterm+256color block.
3596 # The default color palette for the 256- and 88-colors are different. A
3597 # given executable will have one palette (perhaps compiled-in). If the program
3598 # supports xterm's control sequence, it can be programmed using initc.
3599 xterm+88color|xterm 88-color feature,
3600 colors#88, pairs#7744, use=xterm+256color,
3602 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3603 xterm-256color|xterm with 256 colors,
3604 use=xterm+256color, use=xterm-new,
3605 xterm-88color|xterm with 88 colors,
3606 use=xterm+88color, use=xterm-256color,
3608 # These two are used to demonstrate the any-event mouse support, i.e., by
3609 # using an extended name "XM" which tells ncurses to put the terminal into
3610 # a special mode when initializing the xterm mouse.
3611 xterm-1002|testing xterm-mouse,
3612 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3613 xterm-1003|testing xterm-mouse,
3614 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3616 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
3617 # asked for some of xterm's advanced features to be added to its terminfo
3618 # entry. It defines extended capabilities not found in standard terminfo or
3619 # termcap. These are useful in tmux, for instance, hence the name.
3621 # One caveat in adding extended capabilities in ncurses is that if the names
3622 # are longer than two characters, then they will not be visible through the
3623 # termcap interface.
3625 # Ms modifies the selection/clipboard. Its parameters are
3626 # p1 = the storage unit (clipboard, selection or cut buffer)
3627 # p2 = the base64-encoded clipboard content.
3629 # Ss is used to set the cursor style as described by the DECSCUSR
3630 # function to a block or underline.
3631 # Se resets the cursor style to the terminal power-on default.
3633 # Cs and Cr set and reset the cursor colour.
3634 xterm+tmux|advanced xterm features used in tmux,
3635 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
3636 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
3638 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3639 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3640 # To use it, your decTerminalID resource must be set to 200 or above.
3647 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3648 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3649 colors#8, cols#80, it#8, lines#24, pairs#64,
3650 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3651 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3652 civis=\233?25l, clear=\233H\2332J,
3653 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3654 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3655 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3656 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3657 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3658 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3659 flash=\233?5h$<100/>\233?5l, home=\233H,
3660 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3661 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3662 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3663 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
3664 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3665 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3666 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3667 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3668 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3669 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3670 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3671 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3672 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3673 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3674 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3675 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3677 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3678 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3679 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3680 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3681 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3682 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3683 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3684 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3685 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3688 xterm-hp|xterm with hpterm function keys,
3689 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3690 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3691 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3692 knp=\ES, kpp=\ET, use=xterm-basic,
3694 xterm-sco|xterm with SCO function keys,
3695 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3696 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3697 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3698 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3699 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3700 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3701 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3702 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3703 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3704 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3705 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3706 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3709 # The xterm-new description has all of the features, but is not completely
3710 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3711 # sunKeyboard resource to true:
3712 # + maps the editing keypad
3713 # + interprets control-function-key as a second array of keys, so a
3714 # 12-fkey keyboard can support vt220's 20-fkeys.
3715 # + maps numeric keypad "+" to ",".
3716 # + uses DEC-style control sequences for the application keypad.
3718 xterm-vt220|xterm emulating vt220,
3719 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3720 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3721 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3722 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3723 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3724 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3725 use=xterm+app, use=xterm+edit, use=xterm-basic,
3728 xterm-vt52|xterm emulating dec vt52,
3729 cols#80, it#8, lines#24,
3730 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3731 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3732 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3733 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3734 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3737 xterm-noapp|xterm with cursor keys in normal mode,
3738 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3741 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3742 lines#24, use=xterm,
3744 # This is xterm for ncurses.
3745 xterm|xterm terminal emulator (X Window System),
3748 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
3749 # setting the vt100Graphics resource to false.
3750 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
3753 # These building-blocks allow access to the X titlebar and icon name as a
3754 # status line. There are a few problems in using them in entries:
3756 # a) tsl should have a parameter to denote the column on which to transfer to
3758 # b) the "0" code for xterm updates both icon-title and window title. Some
3759 # window managers such as twm (and possibly window managers descended from
3760 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
3761 # don't want to mess with icon-name when using those window managers.
3762 xterm+sl|access X title line and icon name,
3764 dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
3765 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3767 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
3769 # In contrast, this block can be used for a DEC vt320 and up. There are two
3772 # DECSASD (select active status display)
3773 # \E[0$} Main display
3774 # \E[1$} Status line
3776 # DECSSDT (select status line type)
3777 # \E[0$~ No status line
3778 # \E[1$~ Indicator status line
3779 # \E[2$~ Host-writable status line
3781 # The building block assumes that the terminal always shows something at the
3782 # status line (either the indicator, or status line). That is because if no
3783 # status line is used, then the terminal makes that line part of the user
3784 # window, changing its size without notice.
3786 # Because there is no "esl" (enable status line) capability, the "tsl"
3787 # capability ensures that the status line is host-writable. A DEC terminal
3788 # will clear the status line when changing from indicator to host-writable
3791 # Once on the status line, the row part of cursor addressing is ignored. Since
3792 # tsl expects a parameter (to specify the column), the shortest addressing that
3793 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
3795 dec+sl|DEC VTxx status line,
3797 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
3800 # The following xterm variants don't depend on your base version
3802 # xterm with bold instead of underline
3803 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3804 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3805 smso=\E[7m, smul=\E[1m, use=xterm,
3807 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3808 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3809 ich@, ich1@, use=xterm,
3810 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3811 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3812 rmcup@, smcup@, use=xterm,
3815 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3816 # (kterm should not invoke DEC Graphics as the alternate character set
3817 # -- Kenji Rikitake)
3818 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3819 # -- MATSUMOTO Shoji)
3820 # kterm implements acsc via built-in table of X Drawable's
3821 kterm|kterm kanji terminal emulator (X window system),
3824 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3825 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3826 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3827 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3828 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3829 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3830 kterm-color|kterm-co|kterm with ANSI colors,
3831 ncv@, use=kterm, use=ecma+color,
3834 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
3835 # variant of xterm which is apparently no longer supported, but are interesting
3836 # because they illustrate SVr4 curses mouse controls - T.Dickey
3837 xtermm|xterm terminal emulator (monocrome),
3838 OTbs, am, km, mir, msgr, xenl,
3839 btns#3, cols#80, it#8, lines#24,
3840 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3841 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3842 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
3843 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3844 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3845 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3846 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
3847 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3848 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3849 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
3850 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
3851 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
3852 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
3853 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
3854 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3855 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3856 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3857 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
3858 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
3860 xtermc|xterm terminal emulator (color),
3861 colors#8, ncv#7, pairs#64,
3862 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3863 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3864 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3867 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
3868 # Here's a termcap entry I've been using for xterm_color, which comes
3869 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
3870 # color stuff, I also have a status line defined as the window manager
3871 # title bar. [I have translated it to terminfo -- ESR]
3872 xterm-pcolor|xterm with color used for highlights and status line,
3874 bold=\E[1;43m, rev=\E[7;34m,
3875 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
3876 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
3878 # This describes the capabilities of color_xterm, an xterm variant from
3879 # before ECMA-64 color support was folded into the main-line xterm release.
3880 # This entry is straight from color_xterm's maintainer.
3881 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3882 # The README's with the distribution also say that it supports SGR 21, 24, 25
3883 # and 27, but they are not present in the terminfo or termcap.
3884 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3885 OTbs, am, km, mir, msgr, xenl, XT,
3886 cols#80, it#8, lines#65, ncv@,
3887 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3888 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3889 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3890 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3891 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3892 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3893 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3894 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3895 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3896 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3897 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3898 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3899 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3900 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3901 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3902 rmso=\E[27m, rmul=\E[24m,
3903 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3905 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3906 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3907 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3908 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3910 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3911 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3912 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3913 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3914 # that each of those implements the home, end, delete keys differently.
3916 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3917 # colors; note that this is not compatible with the 5.2 version.
3918 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3919 # match XFree86's xterm.terminfo usage and prevent circular links
3920 xterm-color|nxterm|generic color xterm,
3922 op=\E[m, use=xterm-r6, use=klone+color,
3924 # This entry describes an xterm with Sun-style function keys enabled
3925 # via the X resource setting "xterm*sunFunctionKeys:true"
3926 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
3927 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
3928 # because we want it to be seen as <kcpy>.
3929 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
3930 # with their Sun keyboard labels instead.
3931 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
3932 xterm-sun|xterm with sunFunctionKeys true,
3933 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
3934 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
3935 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
3936 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
3937 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
3938 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
3939 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
3940 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
3941 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
3942 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
3943 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
3944 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
3946 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
3947 cols#80, lines#24, use=xterm-sun,
3950 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3951 gnome-rh62|Gnome terminal,
3953 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3956 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3958 # This implements a subset of vt102 with a random selection of features from
3959 # other terminals such as color and function-keys.
3961 # shift-f1 to shift-f10 are f11 to f20
3963 # NumLock changes the application keypad to approximate vt100 keypad, except
3964 # that there is no escape sequence matching comma (,).
3966 # Other defects observed:
3967 # vt100 LNM mode is not implemented.
3968 # vt100 80/132 column mode is not implemented.
3969 # vt100 DECALN is not implemented.
3970 # vt100 DECSCNM mode is not implemented, so flash does not work.
3971 # vt100 TBC (tab reset) is not implemented.
3972 # xterm alternate screen controls do not restore cursor position properly
3973 # it hangs in tack after running function-keys test.
3974 gnome-rh72|GNOME Terminal,
3976 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3977 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3978 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3979 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3981 # GNOME Terminal 2.0.1 (Redhat 8.0)
3983 # Documentation now claims it implements vt220 (which is demonstrably false).
3984 # However, it does implement ECH, which is a vt220 feature. And there are
3985 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3986 # more of its bugs using vttest.
3988 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3989 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3991 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3992 # operations. Shift-tab generates a distinct sequence so it can be argued
3993 # that it implements kcbt.
3994 gnome-rh80|GNOME Terminal,
3996 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3997 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3999 # GNOME Terminal 2.2.1 (Redhat 9.0)
4001 # bce and msgr are repaired.
4002 gnome-rh90|GNOME Terminal,
4004 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4005 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4006 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4009 # GNOME Terminal 2.14.2 (Fedora Core 5)
4010 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4011 gnome-fc5|GNOME Terminal,
4013 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4014 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4016 # GNOME Terminal 2.18.1 (2007 snapshot)
4018 # For any "recent" version of gnome-terminal, it is futile to attempt to
4019 # support modifiers on cursor- and keypad keys because the program usually
4020 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4021 # of the keys (which more/less correspond to the termcap values), and will
4022 # interpret those according to the $TERM value, but others not in the
4023 # terminfo according to some constantly changing set of hacker guidelines -TD
4024 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4025 use=xterm+pcc2, use=gnome-fc5,
4026 gnome-2007|GNOME Terminal snapshot 2.18.1,
4029 # GNOME Terminal 2.22.3 (2008 snapshot)
4031 # In vttest, it claims to be a vt220 with national replacement character-sets,
4032 # but aside from the identifier string, implements only a small fraction of
4033 # vt220's behavior, which will make it less usable on a VMS system (unclear
4034 # what the intent of the developer is, since the NRC feature exposed in vttest
4035 # by this change does not work).
4036 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4037 use=vte+pcfkeys, use=vte-2007,
4038 gnome-2008|GNOME Terminal snapshot 2.22.3,
4041 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4042 # supply key information which is not built into the program. With 2.22.3,
4043 # this list is built into the program (which addresses the inadvertant use of
4044 # random terminfo data, though using a set of values which does not correspond
4045 # to any that xterm produces - still not solving the problem that GNOME
4046 # terminal hardcodes the $TERM variable as "xterm").
4048 # terminfo modifier code keys
4049 # kf13-kf24 shift 2 F1 to F12
4050 # kf25-kf36 control 5 F1 to F12
4051 # kf37-kf48 shift/control 6 F1 to F12
4052 # kf49-kf60 alt 3 F1 to F12
4053 # kf61-kf63 shift-alt 4 F1 to F3
4055 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4056 # no parameters. This appears to be rote copying based on xterm+pcc0.
4057 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4058 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4059 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4060 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4061 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4062 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4063 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4065 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4068 vte|VTE aka GNOME Terminal,
4070 gnome|GNOME Terminal,
4073 # palette is hardcoded...
4074 vte-256color|VTE with xterm 256-colors,
4075 initc@, use=xterm+256color, use=vte,
4076 gnome-256color|GNOME Terminal with xterm 256-colors,
4079 # XFCE Terminal 0.2.5.4beta2
4081 # This is based on some of the same source code, e.g., the VTE library, as
4082 # gnome-terminal, but has fewer features, fails more screens in vttest.
4083 # Since most of the terminfo-related behavior is due to the VTE library,
4084 # the terminfo is the same as gnome-terminal.
4089 # Multi-Gnome-Terminal 1.6.2
4091 # This does not use VTE, and does have different behavior (compare xfce and
4093 mgt|Multi GNOME Terminal,
4094 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4097 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4098 # or not is debatable).
4101 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4104 # (formerly known as kvt)
4106 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4107 # simplify this entry (and point out why konsole isn't xterm), we base this on
4108 # xterm-r6. The default keyboard appears to be 'linux'.
4111 # a) konsole implements several features from XFree86 xterm, though none of
4112 # that is documented - except of course in its source code - apparently
4113 # because its implementors are unaccustomed to reading documentation - as
4114 # evidenced by the sparse and poorly edited documentation distributed with
4115 # konsole. Some features such as the 1049 private mode are recognized but
4116 # incorrectly implemented as a duplicate of the 47 private mode.
4117 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4118 # sends PC-style escapes rather than vt100.
4119 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4120 # parse some control sequences. Also fails vttest Primary Device Attributes
4121 # by sending a bogus code (in the source it says it's supposed to be a
4122 # vt220, which is doubly incorrect because it does not implement vt220
4123 # control sequences except for a few special cases). Treat it as a
4124 # mildly-broken vt102.
4126 # Update for konsole 1.3.2:
4127 # The 1049 private mode works (but see the other xterm screens in vttest).
4128 # Primary Device Attributes now returns the code for a vt100 with advanced
4129 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4131 # Updated for konsole 1.6.4:
4132 # add konsole-solaris
4134 # Updated for konsole 1.6.6:
4135 # add control-key modifiers for function-keys, etc.
4137 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4138 # different from xterm (and vt100's). They have the same behavior in this
4139 # detail, but it is unclear which copies the other.
4140 konsole-base|KDE console window,
4143 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4144 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4145 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4146 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4147 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4148 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
4149 rmso=\E[27m, rmul=\E[24m,
4150 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4151 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4152 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
4153 use=ecma+color, use=xterm-r6,
4154 konsole-linux|KDE console window with linux keyboard,
4155 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4156 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4157 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4158 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4159 konsole-solaris|KDE console window with Solaris keyboard,
4160 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4161 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4162 # than testing the code.
4163 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4164 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4165 # The value for kbs reflects local customization rather than the settings used
4166 # for XFree86 xterm.
4167 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4168 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4170 # Konsole does not implement shifted cursor-keys.
4171 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4172 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4174 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4175 # it is still useful for deriving the other entries.
4176 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4177 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4178 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4179 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4180 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4181 khome=\E[H, use=konsole-base,
4182 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4183 kbs=^H, kdch1=\177, use=konsole-vt100,
4184 konsole-16color|klone of xterm-16color,
4185 ncv#32, use=ibm+16color, use=konsole,
4186 # make a default entry for konsole
4187 konsole|KDE console window,
4190 # palette is hardcoded...
4191 konsole-256color|KDE console window with xterm 256-colors,
4192 initc@, use=xterm+256color, use=konsole,
4195 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4197 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4200 # The function keys are numbered based on shift/control/alt modifiers, except
4201 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4202 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4203 # how it is configured.
4205 # kf1 to kf12 \E[11~ to \E[24~
4206 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4207 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4208 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4209 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4210 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4211 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4212 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4214 mlterm|multi lingual terminal emulator,
4215 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4216 colors#8, cols#80, it#8, lines#24, pairs#64,
4217 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4218 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4219 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4220 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4221 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4222 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4223 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4224 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4225 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4226 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4227 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4228 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4229 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4230 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4231 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4232 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4233 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4234 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4235 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
4236 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4237 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4238 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
4239 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4240 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
4241 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
4243 # The insert/delete/home/end keys do not respond to modifiers because mlterm
4244 # looks in its termcap to decide which string to send. If it used terminfo
4245 # (when available), it could use the extended names introduced for xterm.
4246 mlterm+pcfkeys|fragment for PC-style fkeys,
4247 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
4248 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
4249 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
4250 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
4251 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
4252 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
4253 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
4254 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
4255 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
4257 mlterm-256color|mlterm 3.0 with xterm 256-colors,
4258 use=xterm+256color, use=rxvt,
4261 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
4262 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
4265 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
4266 # but some applications don't work with that.
4267 # It also has an AIX extension
4271 # but the latter does not work correctly.
4273 # The distributed terminfo says it implements hpa and vpa, but they are not
4274 # implemented correctly, using relative rather than absolute positioning.
4276 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
4277 # Since rxvt is not really compatible with xterm, it should be configured as
4278 # "rxvt" or "rxvt-color".
4280 # removed dch/dch1 because they are inconsistent with bce/ech -TD
4281 # remove km as per tack test -TD
4282 rxvt-basic|rxvt terminal base (X Window System),
4283 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
4284 cols#80, it#8, lines#24,
4285 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4286 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4287 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4288 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4289 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4290 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4291 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
4292 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
4293 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
4294 ind=^J, is1=\E[?47l\E=\E[?1l,
4295 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4296 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4297 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
4299 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4300 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4301 s0ds=\E(B, s1ds=\E(0, sc=\E7,
4302 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4303 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4304 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4305 use=rxvt+pcfkeys, use=vt220+keypad,
4306 # Key Codes from rxvt reference:
4308 # Note: Shift + F1-F10 generates F11-F20
4310 # For the keypad, use Shift to temporarily override Application-Keypad
4311 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
4312 # is off, escape sequences toggle Application-Keypad setting.
4313 # Also note that values of Home, End, Delete may have been compiled
4314 # differently on your system.
4316 # Normal Shift Control Ctrl+Shift
4317 # Tab ^I ESC [ Z ^I ESC [ Z
4318 # BackSpace ^H ^? ^? ^?
4319 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
4320 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
4321 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4322 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
4323 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
4324 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
4325 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
4326 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
4327 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
4328 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
4329 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
4330 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
4331 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
4332 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
4333 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
4334 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
4335 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
4336 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
4337 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
4338 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
4339 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
4340 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
4341 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
4342 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
4343 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
4344 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
4345 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
4346 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
4347 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
4350 # Up ESC [ A ESC [ a ESC O a ESC O A
4351 # Down ESC [ B ESC [ b ESC O b ESC O B
4352 # Right ESC [ C ESC [ c ESC O c ESC O C
4353 # Left ESC [ D ESC [ d ESC O d ESC O D
4354 # KP_Enter ^M ESC O M
4355 # KP_F1 ESC O P ESC O P
4356 # KP_F2 ESC O Q ESC O Q
4357 # KP_F3 ESC O R ESC O R
4358 # KP_F4 ESC O S ESC O S
4359 # XK_KP_Multiply * ESC O j
4360 # XK_KP_Add + ESC O k
4361 # XK_KP_Separator , ESC O l
4362 # XK_KP_Subtract - ESC O m
4363 # XK_KP_Decimal . ESC O n
4364 # XK_KP_Divide / ESC O o
4376 # The source-code for rxvt actually defines mappings for F21-F35, using
4377 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
4378 # are rare, so this entry uses the shift- and control-modifiers as in
4379 # xterm+pcfkeys to define keys past F12.
4381 # kIC is normally not used, since rxvt performs a paste for that (shifted
4382 # insert), unless private mode 35 is set.
4384 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
4385 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
4386 rxvt+pcfkeys|fragment for PC-style fkeys,
4387 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
4388 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
4389 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
4390 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4391 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4392 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4393 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
4394 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
4395 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
4396 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
4397 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
4398 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
4399 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
4400 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4401 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
4402 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
4403 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
4404 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
4405 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
4406 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
4408 rxvt|rxvt terminal emulator (X Window System),
4410 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
4411 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
4412 rxvt-color|rxvt terminal emulator (X Window System),
4414 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
4415 use=xterm+256color, use=rxvt,
4416 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
4417 use=xterm+88color, use=rxvt,
4418 rxvt-xpm|rxvt terminal emulator (X Window System),
4420 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
4421 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4423 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
4424 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
4427 # This variant is supposed to work with rxvt 2.7.7 when compiled with
4428 # NO_BRIGHTCOLOR defined. rxvt needs more work...
4429 rxvt-16color|xterm with 16 colors like aixterm,
4430 ncv#32, use=ibm+16color, use=rxvt,
4435 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
4436 # makes its function-keys different from other flavors of rxvt -TD
4437 mrxvt|multitabbed rxvt,
4439 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
4440 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
4441 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
4442 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
4443 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
4444 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
4447 mrxvt-256color|multitabbed rxvt with 256 colors,
4448 use=xterm+256color, use=mrxvt,
4451 # From: Michael Jennings <mej@valinux.com>
4455 # removed kf0 which conflicts with kf10 -TD
4456 # remove cvvis which conflicts with cnorm -TD
4457 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
4458 # but does otherwise follow the rxvt+pcfkeys model -TD
4459 # remove nonworking flash -TD
4460 # remove km as per tack test -TD
4461 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
4462 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
4463 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
4464 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4465 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4466 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4467 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4468 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4469 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4470 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4471 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4472 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4473 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4474 is1=\E[?47l\E>\E[?1l,
4475 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4476 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4477 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4478 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4479 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4480 rmso=\E[27m, rmul=\E[24m,
4481 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4482 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4484 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4485 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4486 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4487 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4490 Eterm-256color|Eterm with xterm 256-colors,
4491 use=xterm+256color, use=Eterm,
4493 Eterm-88color|Eterm with 88 colors,
4494 use=xterm+88color, use=Eterm,
4497 # Based on rxvt 2.4.8, it has a few differences in key bindings
4498 aterm|AfterStep terminal,
4500 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4504 # This is not based on xterm's source...
4505 # vttest shows several problems with keyboard, cursor-movements.
4506 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4507 xiterm|internationalized terminal emulator for X,
4509 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4513 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4514 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4515 # chars look like --esr)
4516 hpterm|X-hpterm|hp X11 terminal emulator,
4517 am, da, db, mir, xhp,
4518 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4519 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4520 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4521 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4522 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4523 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4524 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4525 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4526 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4527 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4528 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4529 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4530 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4531 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4532 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4534 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4535 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4536 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4537 # HPUX 11 provides a color version.
4538 hpterm-color|HP X11 terminal emulator with color,
4542 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4543 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4546 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4547 # It corresponds to emu's internal emulation:
4549 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4550 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4551 # fixes: add civis, cnorm, sgr -TD
4552 emu|emu native mode,
4553 am, bce, mir, msgr, xon,
4554 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4555 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4556 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4557 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4558 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
4559 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4560 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4561 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4562 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4563 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4564 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4565 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4566 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4567 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4568 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4569 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4570 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4571 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4573 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4574 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4576 # vt220 Terminfo entry for the Emu emulation, corresponds to
4578 # with NumLock set (to make the keypad transmit kf0-kf9).
4579 # fixes: add am, xenl, corrected sgr0 -TD
4580 emu-220|Emu-220 (vt200-7bit mode),
4582 cols#80, it#8, lines#24, vt#200,
4583 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4584 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4585 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4586 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4587 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4588 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4589 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4590 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4591 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4592 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4593 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4594 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4595 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4596 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4597 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4598 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4599 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4600 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4601 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4602 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4603 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4604 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4605 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4606 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4609 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4610 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4611 # indicate that it emulates more than one terminal, but incompletely.
4613 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4614 # It is based on vt102's entry, with some subtle differences, but also
4616 # supports ANSI colors (except for 'op' string)
4617 # apparently implements alternate screen like xterm
4618 # does not use padding, of course.
4619 mvterm|vv100|SwitchTerm aka mvTERM,
4620 am, eslok, hs, km, mir, msgr, xenl,
4621 colors#8, cols#80, it#8, lines#24, pairs#64,
4622 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4623 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4624 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4625 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4626 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4627 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4628 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4629 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4630 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4631 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4632 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4633 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4634 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4636 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4637 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4638 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4639 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4640 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4641 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4645 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4647 # "mterm -type ansi" sets $TERM to "ansi"
4648 mterm-ansi|ANSI emulation,
4651 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4652 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4653 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4654 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4655 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4656 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4657 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4658 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4659 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4660 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4662 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4663 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4665 # mterm normally sets $TERM to "mterm"
4666 mterm|mouse-sun|Der Mouse term,
4669 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4670 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4671 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4672 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4673 # "mterm -type decansi" sets $TERM to "decansi"
4675 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4676 decansi|ANSI emulation with DEC compatibility hacks,
4677 am, mir, msgr, xenl,
4678 colors#8, it#8, pairs#64,
4679 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4680 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4681 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4682 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4683 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4684 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4685 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4686 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4687 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4688 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4689 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4690 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4691 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4692 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4693 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4694 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4695 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4696 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4697 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4698 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4699 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4700 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4701 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4702 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4703 u7=\E[6n, vpa=\E[%i%p1%dd,
4707 # vwmterm is a terminal emulator written for the VWM console window manager
4710 am, bce, ccc, mir, msgr, npc, xenl, xon,
4712 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4713 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4714 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
4715 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
4716 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
4717 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
4718 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
4719 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
4720 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
4721 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
4722 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4723 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
4724 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
4725 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4726 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
4727 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
4728 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
4732 # MGR is a Bell Labs window system lighter-weight than X.
4733 # These entries describe MGR's xterm-equivalent.
4734 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4737 mgr|Bellcore MGR (non X) window system terminal emulation,
4739 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4740 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4741 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4742 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4743 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4744 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4745 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4746 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4747 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4749 mgr-sun|Mgr window with Sun keyboard,
4750 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4751 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4752 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4753 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4754 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4755 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4756 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4757 mgr-linux|Mgr window with Linux keyboard,
4758 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4759 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4760 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4761 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4762 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4768 # Note: the original terminfo description uses leading blank to persuade
4769 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
4772 # Reading the code shows it should work for aixterm 16-colors
4773 # - added st-16color
4776 # - set eo (erase-overstrike)
4778 # - tbc doesn't work
4780 # - cbt doesn't work
4781 # - shifted cursor-keys send sequences like rxvt
4782 # - sgr referred to unimplemented "invis" mode.
4783 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
4784 simpleterm|st| simpleterm,
4785 am, eo, mir, msgr, ul, xenl,
4786 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
4787 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4788 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4789 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4790 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4791 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4792 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
4793 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
4794 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
4795 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4796 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4797 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4798 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4799 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
4800 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
4801 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4802 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
4803 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
4804 st-16color|simpleterm with 16-colors,
4805 use=ibm+16color, use=simpleterm,
4806 # 256 colors "works", but when running xterm's test-scripts, some garbage is
4807 # shown in the titlebar.
4808 st-256color|simpleterm with 256 colors,
4810 initc@, use=xterm+256color, use=simpleterm,
4813 # http://software.jessies.org/terminator/
4814 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
4815 # Debian/current -TD (2011/8/20)
4817 # There are some packaging problems:
4818 # a) using Java, the program starts off using 50Mb, and climbs from there,
4819 # up to 114Mb after testing (no scrollback).
4820 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
4821 # (two copies, just in case the host happens to be Mac OS X).
4822 # I deleted this after testing with tack.
4824 # Issues/features found with tack:
4825 # a) tbc does not work (implying that hts also is broken).
4826 # Comparing with the tabs utility shows a problem with the last tabstop on
4828 # b) has xterm-style shifted function-key strings
4829 # meta also is used, but control is ignored.
4830 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
4831 # d) some combinations of shift/control send xterm-style sequences for
4832 # insert/delete/home/end.
4833 # e) numeric keypad sends only numbers (compare with vttest).
4834 # f) meta mode (km) is not implemented.
4836 # Issues found with ncurses test-program:
4837 # a) bce is inconsistently implemented
4838 # b) widths of Unicode values above 256 do not always agree with wcwidth.
4840 # Checked with vttest, found low degree of compatibility there.
4842 # Checked with xterm's scripts, found that the 256-color palette is fixed.
4846 # b) corrected sgr0 to reset alternate character set
4847 # c) modified smacs/rmacs to use SCS rather than SI/SO
4850 terminator|Terminator no line wrap,
4851 eo, mir, msgr, xenl, xon,
4852 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
4853 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4854 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
4855 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4856 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4857 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4858 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4859 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
4860 el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
4861 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
4862 ind=^J, is1=\E[?47l\E=\E[?1l,
4863 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
4864 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4865 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4866 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4867 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4868 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4869 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4870 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
4871 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
4872 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4873 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
4874 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
4875 setaf=\E[38;5;%p1%dm,
4876 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
4877 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
4878 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
4881 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4884 # Columbus UNIX virtual terminal. This terminal also appears in
4885 # UNIX 4.0 and successors as line discipline 1 (?), but is
4886 # undocumented and does not really work quite right.
4887 cbunix|cb unix virtual terminal,
4889 cols#80, lines#24, lm#0,
4890 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4891 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4892 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4893 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4894 smso=\Ea^D, smul=\Ea^A,
4895 # (vremote: removed obsolete ":nl@:" -- esr)
4896 vremote|virtual remote terminal,
4898 cols#79, use=cbunix,
4900 pty|4bsd pseudo teletype,
4901 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4902 smso=\Ea$, smul=\Ea!, use=cbunix,
4904 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4905 eterm|gnu emacs term.el terminal emulation,
4908 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4909 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4910 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4912 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4913 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4914 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4915 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4916 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4919 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
4920 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
4921 am, mir, msgr, xenl,
4922 colors#8, cols#80, lines#24, pairs#64,
4923 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4924 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4925 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4926 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4927 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4928 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4929 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
4930 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4931 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
4932 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
4933 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4934 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
4935 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
4936 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4937 u6=\E[%i%d;%dR, u7=\E[6n,
4939 # Entries for use by the `screen' program by Juergen Weigert,
4940 # Michael Schroeder, Oliver Laumann. The screen and
4941 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4942 # come from University of Wisconsin and may be older.
4943 # (screen: added <cnorm> on ANSI model -- esr)
4945 # 'screen' defines extensions to termcap. Some are used in its terminal
4947 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4948 # AX (bool) Does understand ANSI set default fg/bg color
4949 # (\E[39m / \E[49m).
4950 # S0 (str) Switch charset 'G0' to the specified charset.
4951 # E0 (str) Switch charset 'G0' back to standard charset.
4953 # tested with screen 3.09.08
4954 screen|VT 100/ANSI X3.64 virtual terminal,
4955 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4956 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
4957 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4958 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4959 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4960 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4961 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4962 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4963 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4964 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4965 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4966 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4967 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4968 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4969 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4970 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4971 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4972 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4973 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4974 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4975 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4976 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4977 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4978 S0=\E(%p1%c, use=ecma+color,
4979 # The bce and status-line entries are from screen 3.9.13 (and require some
4980 # changes to .screenrc).
4981 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4984 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4985 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4987 # ======================================================================
4988 # Entries for GNU Screen with 16 colors.
4989 # Those variations permit to benefit from 16 colors palette, and from
4990 # bold font and blink attribute separated from bright colors. But they
4991 # are less portable than the generic "screen" 8 color entries: Their
4992 # usage makes real sense only if the terminals you attach and reattach
4993 # do all support 16 color palette.
4995 screen-16color|GNU Screen with 16 colors,
4996 use=ibm+16color, use=screen,
4998 screen-16color-s|GNU Screen with 16 colors and status line,
4999 use=ibm+16color, use=screen-s,
5001 screen-16color-bce|GNU Screen with 16 colors and BCE,
5002 use=ibm+16color, use=screen-bce,
5004 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
5005 bce, use=ibm+16color, use=screen-s,
5007 # ======================================================================
5008 # Entries for GNU Screen 4.02 with --enable-colors256.
5010 screen-256color|GNU Screen with 256 colors,
5012 initc@, use=xterm+256color, use=screen,
5014 screen-256color-s|GNU Screen with 256 colors and status line,
5016 initc@, use=xterm+256color, use=screen-s,
5018 screen-256color-bce|GNU Screen with 256 colors and BCE,
5020 initc@, use=xterm+256color, use=screen-bce,
5022 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
5024 initc@, use=xterm+256color, use=screen-s,
5026 # ======================================================================
5028 # Read the fine manpage:
5029 # When screen tries to figure out a terminal name for
5030 # itself, it first looks for an entry named "screen.<term>",
5031 # where <term> is the contents of your $TERM variable. If
5032 # no such entry exists, screen tries "screen" (or "screen-w"
5033 # if the terminal is wide (132 cols or more)). If even this
5034 # entry cannot be found, "vt100" is used as a substitute.
5036 # Notwithstanding the manpage, screen uses its own notion of the termcap
5037 # and some keys from "screen.<term>" are ignored. Here is an entry which
5038 # covers those (tested with screen 4.00.02) -TD
5039 screen+fkeys|function-keys according to screen,
5040 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
5043 # Here are a few customized entries which are useful -TD
5046 # (a) screen does not support invis.
5047 # (b) screen's implementation of bw is incorrect according to tack.
5048 # (c) screen appears to hardcode the strings for khome/kend, making it
5049 # necessary to override the "use=" clause's values (screen+fkeys).
5050 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
5051 # which is NOT the same as the terminfo screen.<term>.
5052 # (e) when screen finds one of these customized entries, it sets $TERM to
5053 # match. Hence, no "screen.xterm" entry is provided, since that would
5054 # create heartburn for people running remote xterm's.
5056 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
5057 # since the default translations override the built-in keycode
5058 # translation. They are suppressed here to show what is tested by tack.
5059 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
5061 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
5062 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5063 use=screen+fkeys, use=xterm-new,
5064 # xterm-r6 does not really support khome/kend unless it is propped up by
5065 # the translations resource.
5066 screen.xterm-r6|screen customized for X11R6 xterm,
5067 bw, use=screen+fkeys, use=xterm-r6,
5068 # Color applications running in screen and TeraTerm do not play well together
5069 # on Solaris because Sun's curses implementation gets confused.
5070 screen.teraterm|disable ncv in teraterm,
5072 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5073 use=screen+fkeys, use=screen,
5075 screen.rxvt|screen in rxvt,
5077 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5078 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
5079 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
5080 screen.Eterm|screen in Eterm,
5081 use=screen+fkeys, use=Eterm,
5082 screen.mrxvt|screen in mrxvt,
5083 use=screen+fkeys, use=mrxvt,
5084 screen.vte|screen in any VTE-based terminal,
5085 use=screen+fkeys, use=vte,
5086 screen.gnome|screen in GNOME Terminal,
5087 use=screen+fkeys, use=gnome,
5088 screen.konsole|screen in KDE console window,
5089 use=screen+fkeys, use=konsole,
5090 # fix the backspace key
5091 screen.linux|screen in linux console,
5093 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
5094 screen.mlterm|screen in mlterm,
5095 use=screen+fkeys, use=mlterm,
5097 # The default "screen" entry is reasonably portable, but not optimal for the
5098 # most widely-used terminal emulators. The "bce" capability is supported in
5099 # screen since 3.9.13, and when used, will require fewer characters to be sent
5100 # to the terminal for updates.
5102 # If you are using only terminals which support bce, then you can use this
5103 # feature in your screen configuration.
5105 # Adding these lines to your ".screenrc" file will allow using these customized
5110 screen-bce.xterm-new|screen optimized for modern xterm,
5112 ech@, use=screen.xterm-new,
5113 screen-bce.rxvt|screen optimized for rxvt,
5115 ech@, use=screen.rxvt,
5116 screen-bce.Eterm|screen optimized for Eterm,
5118 ech@, use=screen.Eterm,
5119 screen-bce.mrxvt|screen optimized for mrxvt,
5121 ech@, use=screen.mrxvt,
5122 screen-bce.gnome|screen optimized for GNOME-Terminal,
5124 ech@, use=screen.gnome,
5125 screen-bce.konsole|screen optimized for KDE console window,
5127 ech@, use=screen.konsole,
5128 screen-bce.linux|screen optimized for linux console,
5130 ech@, use=screen.linux,
5131 screen-bce.mlterm|screen optimized for mlterm,
5133 ech@, use=screen.mlterm,
5135 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
5136 cols#132, use=screen,
5138 screen2|old VT 100/ANSI X3.64 virtual terminal,
5139 cols#80, it#8, lines#24,
5140 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
5141 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5142 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5143 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5144 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
5145 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5146 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
5147 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
5148 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
5149 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
5150 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
5151 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
5152 screen3|older VT 100/ANSI X3.64 virtual terminal,
5154 cols#80, it#8, lines#24,
5155 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5156 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5157 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5158 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5159 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5160 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5161 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
5162 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
5163 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
5164 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
5165 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
5166 smul=\E[4m, tbc=\E[3g,
5168 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
5169 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
5170 # been maintained until recently by the National Center for Supercomputer
5171 # Applications, and it is feature rich, stable and free. It can be downloaded
5172 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
5173 # xterm+sl, and the docs at NCSA. It works well.
5175 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
5176 # The terminal options should be set as follows:
5177 # Xterm sequences ON
5178 # use VT wrap mode ON
5179 # use Emacs arrow keys OFF
5180 # CTRL-COMND is Emacs meta ON
5182 # answerback string: "ncsa-vt220-8"
5183 # setup keys: all disabled
5185 # Application mode is not used.
5187 # Other special mappings:
5194 # PAGEDOWN Next Screen
5196 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
5199 # The status-line manipulation is a mapping of the xterm-compatible control
5200 # sequences for setting the window-title. So you must use tsl and fsl in
5201 # pairs, since the latter ends the string that is loaded to the window-title.
5202 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5203 am, km, mir, msgr, xenl,
5204 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5205 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5206 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5207 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5208 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5209 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5210 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5211 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
5212 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5213 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5215 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
5216 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5217 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
5218 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
5219 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
5220 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
5221 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
5222 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
5223 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
5224 rmso=\E[27m, rmul=\E[24m,
5225 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
5226 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5227 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
5228 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5229 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
5230 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5231 use=ncsa-m, use=klone+color,
5232 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
5234 dsl@, fsl@, tsl@, use=ncsa,
5235 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
5237 dsl@, fsl@, tsl@, use=ncsa-m,
5239 # The documented function-key mapping refers to the Apple Extended Keyboard
5240 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
5241 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
5242 # some keyboards and many applications require these as F1-F4.
5244 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
5245 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5246 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
5247 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
5248 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
5249 kf8=\E[19~, kf9=\E[20~, use=ncsa,
5251 #### Pilot Pro Palm-Top
5253 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
5254 # http://www.ai/~iang/TGssh/
5255 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
5258 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
5259 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
5260 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
5263 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
5264 # These entries are for the Embeddable Linux Kernel System (ELKS)
5265 # project - an heavily stripped down Linux to be run on 16 bit
5266 # boxes or, eventually, to be used in embedded systems - and have been
5267 # adapted from the stock ELKS termcap. The project itself looks stalled,
5268 # and the latest improvements I know of date back to March 2000.
5270 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
5271 # as an added bonus, this deals with all the capabilities common to
5272 # both VT52 and ANSI (or, eventually, "special") modes.
5274 elks-glasstty|ELKS glass-TTY capabilities,
5276 cols#80, it#8, lines#25,
5277 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
5280 elks-vt52|ELKS vt52 console,
5281 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
5282 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
5283 home=\EH, use=elks-glasstty,
5285 elks-ansi|ELKS ANSI console,
5286 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5287 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5288 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
5290 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
5291 # instead of VT52, but the "elks" entry still refers to the latter.
5293 elks|default ELKS console,
5296 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
5297 # one but in screen size
5299 sibo|ELKS SIBO console,
5300 cols#61, it#8, lines#20, use=elks-vt52,
5302 ######## COMMERCIAL WORKSTATION CONSOLES
5308 # This is from the OSF/1 Release 1.0 termcap file
5309 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
5312 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5313 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5314 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
5315 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
5316 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5321 # :is1: resets scrolling region in case a previous user had used "tset vt100"
5322 oldsun|Sun Microsystems Workstation console,
5323 OTbs, am, km, mir, msgr,
5324 cols#80, it#8, lines#34,
5325 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
5326 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5327 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5328 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5329 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5330 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
5331 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
5332 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
5333 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
5334 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
5335 sun-il|Sun Microsystems console with working insert-line,
5338 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5339 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
5340 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
5341 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5342 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5343 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
5344 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
5345 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
5346 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
5347 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
5348 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
5349 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
5350 smso=\E[7m, u8=\E[1t, u9=\E[11t,
5351 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
5352 # flake out on the last line. Unfortunately, without them the terminal has no
5354 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
5355 il@, il1@, use=sun-il,
5356 # If you are using an SS5, change the sun definition to use sun-ss5.
5357 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
5360 sun+sl|Sun Workstation window status line,
5362 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
5364 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
5365 sun-s|Sun Microsystems Workstation window with status line,
5367 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
5368 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
5370 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
5371 sun-48|Sun 48-line window,
5372 cols#80, lines#48, use=sun,
5373 sun-34|Sun 34-line window,
5374 cols#80, lines#34, use=sun,
5375 sun-24|Sun 24-line window,
5376 cols#80, lines#24, use=sun,
5377 sun-17|Sun 17-line window,
5378 cols#80, lines#17, use=sun,
5379 sun-12|Sun 12-line window,
5380 cols#80, lines#12, use=sun,
5381 sun-1|Sun 1-line window for sysline,
5384 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
5385 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
5386 ich1@, rmir@, smir@, use=sun,
5387 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
5389 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
5390 sun-type4|Sun Workstation console with type 4 keyboard,
5391 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
5392 kcuu1=\E[215z, use=sun-il,
5394 # Most of the current references to sun-color are from users wondering why this
5395 # is the default on install. Details from reading the wscons manpage, adding
5396 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
5397 # when those were added -TD (2005-05-28)
5399 # According to wscons manpage, color is supported only on IA systems.
5400 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
5401 # does not list these. It also sets ncv#3, however that corresponds to
5402 # underline and standout.
5404 # Since the documentation and terminfo do not agree, see also current code at
5405 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
5407 # That (actually a different driver which "supports" sun-color) also supports
5414 # It supports bold, but not underline -TD (2009-09-19)
5415 sun-color|Sun Microsystems Workstation console with color support (IA systems),
5416 colors#8, ncv#3, pairs#64,
5417 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
5418 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
5419 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5420 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5421 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5422 sgr=\E[0%?%p1;1%;%?%p3%;7%;m, sgr0=\E[m, smso=\E[1m,
5428 # (wsiris: this had extension capabilities
5429 # :HS=\E7F2:HE=\E7F7:\
5430 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
5431 # See the note on Iris extensions near the end of this file.
5432 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
5433 # <flash> from BRL -- esr)
5434 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
5435 OTbs, OTnc, OTpt, am,
5436 OTkn#3, cols#80, it#8, lines#40,
5437 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
5438 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5439 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
5440 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
5441 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
5442 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
5443 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
5444 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
5449 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
5450 # environment). Note: these have nothing to do with Sony's News workstation
5454 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
5455 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
5456 psterm|psterm-basic|NeWS psterm-80x34,
5457 OTbs, am, hs, km, ul,
5458 cols#80, it#8, lines#34,
5459 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
5460 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
5461 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
5462 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
5463 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
5464 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
5465 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
5467 psterm-96x48|NeWS psterm 96x48,
5468 cols#96, lines#48, use=psterm,
5469 psterm-90x28|NeWS psterm 90x28,
5470 cols#90, lines#28, use=psterm,
5471 psterm-80x24|NeWS psterm 80x24,
5472 cols#80, lines#24, use=psterm,
5473 # This is a faster termcap for psterm. Warning: if you use this termcap,
5474 # some control characters you type will do strange things to the screen.
5475 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
5476 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
5477 OTbs, am, hs, km, ul,
5478 cols#80, it#8, lines#34,
5479 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
5480 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
5481 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
5482 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5483 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
5484 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
5485 smso=^Oo, smul=^Ou, tsl=^Ol,
5489 # Use `glasstty' for the Workspace application
5492 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
5495 cols#80, it#8, lines#24,
5496 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5497 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5498 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5499 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
5500 nextshell|NeXT Shell application,
5503 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
5506 #### Sony NEWS workstations
5509 # (news-unk: this had :KB=news: -- esr)
5510 news-unk|SONY NEWS vt100 emulator common entry,
5511 OTbs, OTpt, am, xenl,
5513 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
5514 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5515 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
5516 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5517 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
5518 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
5519 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
5520 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
5521 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
5522 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5523 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
5524 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5526 # (news-29: this had :TY=ascii: --esr)
5528 lines#29, use=news-unk,
5529 # (news-29-euc: this had :TY=euc: --esr)
5532 # (news-29-sjis: this had :TY=sjis: --esr)
5536 # (news-33: this had :TY=ascii: --esr)
5538 lines#33, use=news-unk,
5539 # (news-33-euc: this had :TY=euc: --esr)
5542 # (news-33-sjis: this had :TY=sjis: --esr)
5546 # (news-42: this had :TY=ascii: --esr)
5548 lines#42, use=news-unk,
5549 # (news-42-euc: this had :TY=euc: --esr)
5552 # (news-42-sjis: this had :TY=sjis: --esr)
5556 # NEWS-OS old termcap entry
5558 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
5559 news-old-unk|SONY NEWS vt100 emulator common entry,
5560 OTbs, OTpt, am, xenl,
5562 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
5563 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
5564 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5565 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
5566 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
5567 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
5568 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
5569 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5570 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5572 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
5573 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
5576 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5579 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
5580 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
5582 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
5585 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
5586 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
5589 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
5592 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
5593 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
5596 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5599 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
5600 # also the alias vt100-bm.
5601 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
5604 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
5607 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
5608 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
5611 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
5614 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
5615 news28|sony vt100 emulator 28 lines,
5618 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
5621 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
5622 news29|news28-a|sony vt100 emulator 29 lines,
5624 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
5627 # (news511: this had :TY=sjis: --esr)
5628 nwp511|nwp-511|nwp-511 vt100,
5629 OTbs, OTpt, am, xenl,
5631 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5632 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
5633 ed=\E[J$<30/>, el=\E[K$<3/>,
5634 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
5635 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
5636 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
5637 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
5638 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5639 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
5640 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5641 # (news517: this had :TY=sjis:. --esr)
5642 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
5645 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5646 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
5647 tsl=\E[1$}\E[;%df, use=vt200,
5648 # (news517-w: this had :TY=sjis:. --esr)
5649 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5652 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5653 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5654 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5655 tsl=\E[1$}\E[;%df, use=vt200,
5657 #### Common Desktop Environment
5660 # This ships with Sun's CDE in Solaris 2.5
5661 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5662 dtterm|CDE desktop terminal,
5663 am, mir, msgr, xenl, xon,
5664 cols#80, it#8, lines#24, lm#0, ncv@,
5665 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5666 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5667 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5668 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5669 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5670 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5671 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5672 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5673 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5674 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5675 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5676 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5677 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5678 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5679 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5680 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5681 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5682 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5683 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5684 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5686 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5687 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5688 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5690 #### Non-Unix Consoles
5693 #### EMX termcap.dat compatibility modes
5695 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5696 # no_color_video to inform the application that standout(1), underline(2)
5697 # reverse(4) and invisible(64) don't work with color.
5698 emx-base|DOS special keys,
5701 bel=^G, use=ansi.sys,
5703 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5704 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5705 # names longer than 14 characters, the nominal maximum).
5707 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5708 ansi-emx|ANSI.SYS color,
5709 am, bce, eo, mir, msgr, xon,
5710 colors#8, cols#80, it#8, lines#25, pairs#64,
5711 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5712 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5713 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5714 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5715 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5716 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5717 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5718 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5719 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5720 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5721 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5722 u9=\E[c, use=emx-base,
5723 # nice colors for Emacs (white on blue, mode line white on cyan)
5724 ansi-color-2-emx|ANSI.SYS color 2,
5725 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5726 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5727 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5728 smul=\E[1;36;44m, use=ansi-emx,
5729 # nice colors for Emacs (white on black, mode line black on cyan)
5730 ansi-color-3-emx|ANSI.SYS color 3,
5731 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5732 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5733 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5734 smul=\E[0;36;40m, use=ansi-emx,
5735 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5737 cols#80, it#8, lines#24,
5738 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5739 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5740 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5741 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5742 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5743 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5746 # Use this for cygwin32 (tested with beta 19.1)
5747 # underline is colored bright magenta
5748 # shifted kf1-kf12 are kf11-kf22
5749 cygwinB19|ansi emulation for cygwin32,
5750 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5751 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5752 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5753 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5754 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5755 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5756 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5759 # Use this for cygwin (tested with version 1.1.0).
5760 # I've combined pcansi and linux. Some values of course were different and
5761 # I've indicated which of these were and which I used.
5762 # Cheers, earnie_boyd@yahoo.com
5763 # several changes based on running with tack and comparing with older entry -TD
5764 # more changes from csw:
5766 # remove eo [erase overstrike with blank]
5767 # change clear was \E[H\E[J now \E[2J (faster?)
5770 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5772 # add cub [cursor back param]
5773 # add cuf [cursor forward param]
5774 # add cuu [cursor up param]
5775 # add cud [cursor down param]
5776 # add hs [has status line]
5777 # add fsl [return from status line]
5778 # add tsl [go to status line]
5779 # add smacs [Start alt charset] (not sure if this works)
5780 # add rmacs [End alt charset] (ditto)
5781 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5782 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5783 # add kb2 [center of keypad]
5784 # add u8 [user string 8] \E[?6c
5785 # add el [clear to end of line] \E[K
5787 # cnorm [make cursor normal] not implemented
5788 # flash [flash] not implemented
5789 # blink [blink] not implemented very usefully in cygwin? \E[5m
5790 # dim [dim] not implemented very usefully in cygwin? \E[2m
5791 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5792 # kNXT [shifted next key] not implemented
5793 # kPRV [shifted prev key] not implemented
5794 # khome [home key] really is \E[1~ NOT \E[H
5795 # tbc [clear tab stops] not implemented
5796 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5797 # smpch [Start PC charset] is \E[11m, same as smacs
5798 # rmpch [End PC charset] is \E[10m, same as rmacs
5799 # mir [move in insert mode] fails in tack?
5800 # bce [back color erase] causes problems with change background color?
5801 # cvvis [make cursor very visible] causes a stackdump when testing with
5802 # testcurs using the output option? \E[?25h\E[?8c
5803 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5804 # ech [erase characters param] broken \E[%p1%dX
5805 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5808 # Remove cbt since it does not work in current cygwin
5809 # Add 'mir' and 'in' flags based on tack
5810 cygwin|ansi emulation for Cygwin,
5811 am, hs, mir, msgr, xon,
5812 colors#8, it#8, pairs#64,
5813 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5814 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5815 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5816 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5817 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5818 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5819 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5820 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5821 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5822 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5823 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5824 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5825 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5826 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5827 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5828 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5829 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5830 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5831 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5832 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5833 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5834 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5835 vpa=\E[%i%p1%dd, use=vt102+enq,
5837 # I've supplied this so that you can help test new values and add other
5838 # features. Cheers, earnie_boyd@yahoo.com.
5840 # Some features are from pcansi. The op value is from linux. Function-keys
5841 # are from linux. These have been tested not to cause problems. xenl was in
5842 # this list, but DOES cause problems so it has been removed
5843 cygwinDBG|Debug Version for Cygwin,
5844 am, eo, mir, msgr, xon,
5845 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5846 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5847 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5848 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5849 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5850 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5851 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5852 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5853 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5854 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5855 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5856 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5857 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5858 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5859 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5860 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5861 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5862 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5863 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5864 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5865 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5867 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5868 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5869 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
5872 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5873 # encodings used by other x86 environments. All others are invented for DJGPP.
5874 # Oddly enough, while several combinations of modifiers are tabulated, there is
5875 # none for shifted cursor keys.
5927 # Ctrl-Delete \E[43~
5928 # Ctrl-Down Arrow \E[38~
5931 # Ctrl-Insert \E[42~
5932 # Ctrl-Left Arrow \E[39~
5933 # Ctrl-Page Down \E[46~
5934 # Ctrl-Page Up \E[45~
5935 # Ctrl-Right Arrow \E[40~
5936 # Ctrl-Up Arrow \E[37~
5952 # Alt-Down Arrow \E[60~
5956 # Alt-Left Arrow \E[61~
5957 # Alt-Page Down \E[68~
5958 # Alt-Page Up \E[67~
5959 # Alt-Right Arrow \E[62~
5960 # Alt-Up Arrow \E[59~
5989 djgpp|ansi emulation for DJGPP alpha,
5990 am, bce, msgr, xhp, xon, xt,
5991 colors#8, it#8, pairs#64,
5992 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5993 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5994 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5995 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5996 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5997 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5998 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5999 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6000 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6001 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
6002 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6003 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
6004 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6005 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6006 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
6007 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
6008 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6009 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
6010 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6012 djgpp203|Entry for DJGPP 2.03,
6014 cols#80, it#8, lines#25,
6015 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
6018 djgpp204|Entry for DJGPP 2.04,
6020 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
6021 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
6022 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
6023 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6024 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6025 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
6026 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
6027 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6028 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
6029 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6030 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
6031 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6032 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6033 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
6034 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
6035 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6037 # This is tested using U/Win's telnet. Scrolling is omitted because it is
6038 # buggy. Another odd bug appears when displaying "~" in alternate character
6039 # set (the emulator spits out error messages). Compare with att6386 -TD
6040 uwin|U/Win 3.2 console,
6041 am, eo, in, msgr, xenl, xon,
6042 colors#8, it#8, ncv#58, pairs#64,
6043 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6044 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6045 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
6046 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6047 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
6048 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
6049 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6050 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
6051 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
6052 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
6053 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
6054 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
6055 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6056 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
6057 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
6058 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
6060 # This entry fits the Windows NT console when the _POSIX_TERM environment
6061 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
6062 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
6063 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
6064 # systems is not, and (surprise!) they match very well.
6066 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
6067 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
6068 # are the installation instructions a pile of mind-numbing bureaucratese,
6069 # but the termcap entry is actually broken and unusable as given; the :do:
6070 # capability is misspelled "d".
6072 # To use this, you need to a bunch of environment variables:
6074 # SET _POSIX_TERM=on
6076 # SET TERMCAP=location of termcap file in POSIX file format
6077 # which is case-sensitive.
6078 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
6081 # Important note: setting the TMP environment variable in POSIX style renders
6082 # it incompatible with a lot of other applications, including Visual C++. So
6083 # you should have a separate command window just for vi. All the other
6084 # variables may be permanently set in the Control Panel\System applet.
6086 # You can find out more about the restrictions of this facility at
6087 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
6089 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
6090 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
6092 cols#80, it#8, lines#25,
6093 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6094 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6095 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
6096 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
6097 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
6098 # From: jew@venus.sunquest.com
6099 # Date: 19 Feb 93 23:41:07 GMT
6100 # Here's a combination of ansi and vt100 termcap
6101 # entries that works nearly perfectly for me
6102 # (Gateway 2000 Handbook and Microsoft Works 3.0):
6103 pcmw|PC running Microsoft Works,
6105 cols#80, it#8, lines#24, vt#3,
6106 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
6107 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
6108 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
6109 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
6110 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
6111 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6112 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
6113 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
6114 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6115 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6116 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6119 # From: Federico Bianchi
6120 # This is the entry for the OpenNT terminal.
6121 # The ntconsole name is for backward compatability.
6122 # This is for OpenNT 2.0 and later.
6123 # Later OpenNT was renamed to Interix.
6125 # Presently it is distributed by Microsoft as Services For Unix (SFU).
6126 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
6127 # the documentation dates from 1.9.9e) -TD
6129 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
6131 colors#8, cols#80, lines#25, ncv#3, pairs#64,
6132 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6133 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
6134 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
6135 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6136 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6137 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
6138 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6139 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
6140 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
6141 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
6142 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
6143 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
6144 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
6145 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
6146 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
6147 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
6148 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
6149 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
6150 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
6151 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
6152 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
6153 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
6154 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
6155 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
6156 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6157 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
6158 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
6160 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
6161 lines#35, use=opennt,
6163 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
6164 lines#50, use=opennt,
6166 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
6167 lines#60, use=opennt,
6169 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
6170 lines#100, use=opennt,
6172 # OpenNT wide terminals
6173 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
6174 cols#125, use=opennt,
6176 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
6177 lines#35, use=opennt-w,
6179 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
6180 lines#50, use=opennt-w,
6182 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
6183 lines#60, use=opennt-w,
6185 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
6186 cols#132, use=opennt,
6188 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
6189 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
6190 rmcup@, smcup@, use=opennt,
6192 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
6193 lines#35, use=opennt-nti,
6195 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
6196 lines#50, use=opennt-nti,
6198 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
6199 lines#60, use=opennt-nti,
6201 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
6202 lines#100, use=opennt-nti,
6204 ######## COMMON TERMINAL TYPES
6206 # This section describes terminal classes and maker brands that are still
6207 # quite common, but have proprietary command sets not blessed by ANSI.
6212 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
6213 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
6214 # Acer has a web site at http://www.acer.com.
6216 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
6217 # His comments suggest they were shipped with the system.
6220 # (altos2: had extension capabilities
6221 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6222 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6223 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6224 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6225 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6226 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
6227 # :HL=^AP\r:SP=\E[i:\
6228 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
6229 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
6230 # Comparison with the k* capabilities makes it obvious that the c* things are
6231 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
6232 # :sr: was given as a boolean-- esr)
6233 altos2|alt2|altos-2|altos II,
6234 cols#80, it#8, lines#24, xmc#0,
6235 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
6236 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
6237 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
6238 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
6239 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
6240 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
6241 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
6242 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6243 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6244 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6245 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6246 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
6247 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
6248 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
6249 # (altos3: had extension capabilities
6250 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6251 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6252 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6253 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6254 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
6255 # :HL=^AP\r:SP=\E[i:\
6256 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
6257 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
6258 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
6259 altos4|alt4|altos-4|altos IV,
6261 # (altos7: had extension capabilities:
6262 # :GG#0:GI=\EH8:GF=\EH7:\
6263 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
6264 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
6265 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
6266 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
6267 # Comparison with the k* capabilities makes it obvious that the c* things are
6268 # shift keys. I have renamed them to keys 32 and up accordingly. I have
6269 # also made this entry relative to adm12 in order to give it an <sgr>. The
6270 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
6271 altos7|alt7|altos VII,
6273 cols#80, lines#24, xmc#0,
6274 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
6275 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6276 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6277 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
6279 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
6280 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
6281 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
6282 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
6283 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
6284 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
6285 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6286 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
6287 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
6288 rmir=\Er, smir=\Eq, use=adm+sgr,
6289 altos7pc|alt7pc|altos PC VII,
6290 kend=\ET, use=altos7,
6292 #### Hewlett-Packard (hp)
6295 # 8000 Foothills Blvd
6296 # Roseville, CA 95747
6297 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
6298 # 1-(800)-633-3600 (General customer support)
6301 # As of March 1998, HP no longer has any terminals in production.
6302 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
6303 # supported (they still have parts). So are the 2392a and 2394a.
6304 # See the WORKSTATION CONSOLES section for the 700s.
6307 # Generic HP terminal - this should (hopefully) work on any HP terminal.
6308 hpgeneric|hp|hewlett-packard generic terminal,
6309 OTbs, OTpt, am, da, db, mir, xhp,
6310 cols#80, lines#24, lm#0, vt#6,
6311 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6312 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
6313 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
6314 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
6315 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6318 hp110|hewlett-packard model 110 portable,
6319 lines#16, use=hpgeneric,
6321 hp+pfk+cr|hp function keys with CR,
6322 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
6323 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
6325 hp+pfk-cr|hp function keys w/o CR,
6326 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
6329 # The hp2621s use the same keys for the arrows and function keys,
6330 # but not separate escape sequences. These definitions allow the
6331 # user to use those keys as arrow keys rather than as function
6333 hp+pfk+arrows|hp alternate arrow definitions,
6334 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
6335 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
6336 kll=\Eq\r, kri=\Es\r,
6338 hp+arrows|hp arrow definitions,
6339 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6340 kind=\ES, kll=\EF, kri=\ET,
6342 # Generic stuff from the HP 262x series
6344 hp262x|HP 262x terminals,
6346 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
6347 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6348 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6349 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
6350 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6351 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
6352 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
6354 # Note: no <home> on HPs since that homes to top of memory, not screen.
6355 # Due to severe 2621 braindamage, the only way to get the arrow keys to
6356 # transmit anything at all is to turn on the function key labels
6357 # with <smkx>, and even then the user has to hold down shift!
6358 # The default 2621 turns off the labels except when it has to to
6359 # enable the function keys. If your installation prefers labels
6360 # on all the time, or off all the time (at the "expense" of the
6361 # function keys), use 2621-nl or 2621-wl.
6363 # Note: there are newer ROMs for 2621's that allow you to set
6364 # strap A so the regular arrow keys xmit \EA, etc, as with the
6365 # 2645. However, even with this strap set, the terminal stops
6366 # xmitting if you reset it, until you unset and reset the strap!
6367 # Since there is no way to set/unset the strap with an escape
6368 # sequence, we don't use it in the default.
6369 # If you like, you can use 2621-ba (brain-damaged arrow keys).
6370 hp2621-ba|2621 w/new rom and strap A set,
6371 rmkx@, smkx@, use=hp+arrows, use=hp2621,
6373 # hp2621 with function labels. Most of the time they are off,
6374 # but inside vi, the function key labels appear. You have to
6375 # hold down shift to get them to xmit.
6376 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
6377 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
6381 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
6382 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
6383 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
6384 use=hp+pfk+cr, use=hpgeneric,
6386 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
6387 hp2621p|hp 2621 with printer,
6388 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
6390 hp2621p-a|hp2621p with fn as arrows,
6391 use=hp+pfk+arrows, use=hp2621p,
6393 # hp2621 with k45 keyboard
6394 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
6395 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
6396 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
6398 # 2621 using all 48 lines of memory, only 24 visible at any time.
6399 hp2621-48|48 line 2621,
6401 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
6404 # 2621 with no labels ever. Also prevents vi delays on escape.
6405 hp2621-nl|hp 2621 with no labels,
6406 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
6409 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
6412 hp2621-nt|hp 2621 w/no tabs,
6415 # Hp 2624 B with 4 or 10 pages of memory.
6417 # Some assumptions are made with this entry. These settings are
6418 # NOT set up by the initialization strings.
6420 # Port Configuration
6425 # Terminal Configuration
6431 # Note: the 2624 DOES have a true <home>, believe it or not!
6433 # The 2624 has an "error line" to which messages can be sent.
6434 # This is CLOSE to what is expected for a "status line". However,
6435 # after a message is sent to the "error line", the next carriage
6436 # return is EATEN and the "error line" is turned back off again!
6437 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
6439 # This entry supports emacs (and any other program that uses raw
6440 # mode) at 4800 baud and less. I couldn't get the padding right
6443 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
6444 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
6447 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
6448 use=hp+labels, use=scrhp,
6450 # This hp2626 entry does not use any of the fancy windowing stuff
6453 # Indeed, terminfo does not yet handle such stuff. Since changing
6454 # any window clears memory, it is probably not possible to use
6455 # this for screen opt.
6457 # ed is incredibly slow most of the time - I am guessing at the
6458 # exact padding. Since the terminal uses xoff/xon this is intended
6459 # only for cost computation, so that the terminal will prefer el
6460 # or even dl1 which is probably faster!
6462 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
6463 # extra slow on the last line of the window.
6465 # The padding probably should be changed.
6467 hp2626|hp2626a|hp2626p|hp 2626,
6470 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
6471 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
6472 use=hp+labels, use=scrhp,
6474 # This entry is for sysline. It allocates a 23 line window with
6475 # a 115 line workspace for regular use, and a 1 line window for
6478 # This assumes port 2 is being used.
6479 # Turn off horizontal line, Create ws #1 with 115 lines,
6480 # Create ws #2 with 1 line, Create window #1 lines 1-23,
6481 # Create window #2 lines 24-24, Attach cursor to workspace #1.
6482 # Note that this clears the tabs so it must be done by tset before
6485 hp2626-s|hp 2626 using only 23 lines,
6488 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
6489 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
6490 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
6491 # Force terminal back to 24 lines after being 23.
6492 hp2626-ns|hp 2626 using all 24 lines,
6493 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
6495 # Various entries useful for small windows on 2626.
6496 hp2626-12|hewlett-packard 2626 12 lines,
6497 lines#12, use=hp2626,
6498 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
6499 cols#40, lines#12, use=hp2626,
6500 hp2626-x40|hewlett-packard 2626 40 columns,
6501 cols#40, use=hp2626,
6502 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
6503 lines#11, use=hp2626-s,
6506 # hp2627 color tubes from University of Wisconsin
6508 hp2627a-rev|hp 2627 with reverse video colors,
6509 cr=^M, cud1=^J, ht=^I, ind=^J,
6510 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
6511 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
6512 smul=\E&dD\E&v1S, use=hp2621-nl,
6513 hp2627a|hp 2627 color terminal with no labels,
6514 cr=^M, cud1=^J, ht=^I, ind=^J,
6515 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
6516 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
6517 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
6519 hp2627c|hp 2627 color (cyan) terminal with no labels,
6520 cr=^M, cud1=^J, ht=^I, ind=^J,
6521 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
6522 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
6524 # hp2640a doesn't have the Y cursor addressing feature, and C is
6525 # memory relative instead of screen relative, as we need.
6528 cup@, rmkx@, smkx@, use=hp2645,
6530 hp2640b|hp2644a|hp 264x series,
6531 rmkx@, smkx@, use=hp2645,
6533 # (hp2641a: removed unknown :gu: -- esr)
6534 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
6535 am, da, db, mir, xhp,
6537 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6538 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6539 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
6540 if=/usr/share/tabset/std, il1=\EL, ind=^J,
6541 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6542 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6545 # This terminal should be used at 4800 baud or less. It needs padding for
6546 # plain characters at 9600, I guessed at an appropriate cr delay. It really
6547 # wants ^E/^F handshaking, but that doesn't work well even if you write
6548 # software to support it.
6549 hp2645|hp45|HP 2645 series,
6551 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
6552 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6553 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
6554 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
6556 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
6557 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
6558 # You should use this terminal at 4800 baud or less.
6559 hp2648|hp2648a|HP 2648a graphics terminal,
6560 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
6561 dch1=\EP$<7>, ip=$<5>, use=hp2645,
6563 # The HP 150 terminal is a fairly vanilla HP terminal, with the
6564 # clreol standout problem. It also has graphics capabilities and
6565 # a touch screen, which we don't describe here.
6566 hp150|hewlett packard Model 150,
6569 # HP 2382a terminals, "the little ones." They don't have any
6570 # alternate character set support and sending out ^N/^O will
6571 # leave the screen blank.
6572 hp2382a|hp2382|hewlett packard 2382a,
6576 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6578 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
6579 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
6581 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
6582 use=hp+pfk+arrows, use=hp2621-fl,
6584 # newer hewlett packard terminals
6586 newhpkeyboard|generic entry for HP extended keyboard,
6587 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6588 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
6589 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
6590 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
6593 newhp|generic entry for new hewlett packard terminals,
6594 am, bw, mir, xhp, xon,
6595 cols#80, lines#24, pb#4800,
6596 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
6597 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
6598 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
6599 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
6600 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
6601 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
6602 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
6603 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
6604 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
6605 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
6606 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
6607 tbc=\E3, use=newhpkeyboard,
6609 memhp|memory relative addressing for new HP ttys,
6611 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
6612 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
6613 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
6614 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
6616 scrhp|screen relative addressing for new HP ttys,
6617 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
6618 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6619 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6620 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6621 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6623 # (hp+labels: added label values from a BRL termcap -- esr)
6624 hp+labels|"standard" label info for new HP ttys,
6626 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6627 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6628 rmln=\E&j@, smln=\E&jB,
6630 hp+printer|"standard" printer info for HP ttys,
6631 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6634 # The new hp2621b is kind of a cross between the old 2621 and the
6635 # new 262x series of machines. It has dip-switched options.
6636 # The firmware has a bug in it such that if you give it a null
6637 # length label, the following character is eaten!
6638 hp2621b|hp 2621b with old style keyboard,
6639 lh#1, lm#48, lw#8, nlab#8,
6640 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6641 kind=\ET, kll=\EF, kri=\ES,
6642 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6643 smln=\E&jB, use=hp2621,
6645 hp2621b-p|hp 2621b with printer,
6646 use=hp+printer, use=hp2621b,
6648 # hp2621b - new 2621b with new extended keyboard
6649 # these are closer to the new 26xx series than the other 2621b
6650 hp2621b-kx|hp 2621b with extended keyboard,
6651 use=newhpkeyboard, use=hp2621b,
6653 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6654 use=hp+printer, use=hp2621b-kx,
6656 # Some assumptions are made in the following entries.
6657 # These settings are NOT set up by the initialization strings.
6659 # Port Configuration
6660 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6662 # Terminal Configuration
6663 # InhHndShk(G)=Yes InhDC2(H)=Yes
6664 # XmitFnctn(A)=No InhEolWrp=No
6667 # Hp 2622a & hp2623a display and graphics terminals
6669 hp2622|hp2622a|hp 2622,
6672 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
6674 # The 2623 is a 2622 with extra graphics hardware.
6675 hp2623|hp2623a|hp 2623,
6678 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6679 use=hp+printer, use=hp2624,
6681 # The hewlett packard B can have an optional extra 6 pages of memory.
6682 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6685 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6686 lm#240, use=hp2624b-p,
6688 # Color manipulations for HP terminals
6689 hp+color|hp with colors,
6691 colors#16, ncv#17, pairs#7,
6692 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6693 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6694 op=\E&v0S, scp=\E&v%p1%dS,
6696 # <is2> sets the screen to be 80 columns wide
6697 hp2397a|hp2397|hewlett packard 2397A color terminal,
6698 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6700 # HP 700/44 Setup parameters:
6701 # Terminal Mode HP-PCterm
6702 # Inhibit Auto Wrap NO
6703 # Status Line Host Writable
6704 # PC Character Set YES
6705 # Twenty-Five Line Mode YES
6706 # XON/XOFF @128 or 64 (sc)
6707 # Keycode Mode NO or YES (sc)
6708 # Backspace Key BS or BS/DEL
6710 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6711 # \E\\? does not turn off keycode mode
6712 # <smsc> sets alternate start/stop; keycode on
6713 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6716 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6717 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6718 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6719 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6720 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6722 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6723 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6724 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6725 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6726 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6727 kpp=\E[5~, rmam=\E[?7l,
6728 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6729 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6730 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6731 smul=\E[4m, xoffc=g, xonc=e,
6733 # (hp2392: copied <rmir> here from hpex -- esr)
6736 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6737 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6738 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6739 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6742 hpsub|hp terminals -- capability subset,
6743 am, da, db, mir, xhp, xon,
6745 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6746 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6747 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6748 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6749 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6750 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6753 # May be used for most 24 x 80 hp terminals,
6754 # but has no padding added, so may allow runover in some terminals at high
6755 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6756 # hp98x5 terminal emulators or hp98x6 consoles.
6757 # Adds xy-cursor addressing, vertical cursor addressing, home,
6758 # last line, and underline capabilities.
6760 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6761 # moved <rmir> here from hpsub -- esr)
6762 hpex|hp extended capabilites,
6763 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6764 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6765 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6767 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6768 hp2|hpex2|hewlett-packard extended capabilities newer version,
6769 am, da, db, mir, xhp,
6770 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6771 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6772 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6773 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6774 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6775 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6776 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6777 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6778 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6779 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6780 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6781 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6782 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6783 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6784 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6785 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6786 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6787 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6790 # From: <ddavis@ic.berkeley.edu>
6791 hp236|hp236 internal terminal emulator,
6794 clear=\EF, cnorm=\EDE, cub1=^H,
6795 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6796 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6797 sgr0=\ECI, smso=\EBI,
6799 # This works on a hp300 console running Utah 4.3 BSD
6800 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6801 hp300h|HP Catseye console,
6802 OTbs, am, da, db, mir, xhp,
6803 cols#128, lines#51, lm#0, xmc#0,
6804 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6805 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6806 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6807 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6808 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6809 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6810 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6812 # From: Greg Couch <gregc@ernie.berkeley.edu>
6813 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6814 OTbs, am, da, db, mir, xhp,
6815 cols#128, it#8, lines#46, lm#0,
6816 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6817 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6818 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6819 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6820 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6821 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6822 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6823 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6824 tbc=\E3, vpa=\E&a%p1%dY,
6825 # HP 9845 desktop computer from BRL
6826 # (hp9845: removed unknown capability :gu: -- esr)
6828 OTbs, am, da, db, eo, mir, xhp,
6830 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6831 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
6832 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
6833 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
6834 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6835 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6836 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6837 hp98550|hp98550a|HP 9000 Series 300 color console,
6838 OTbs, am, da, db, mir, xhp,
6839 cols#128, it#8, lines#49, lm#0,
6840 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6841 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6842 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6843 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6844 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6845 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6846 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6847 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6848 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6849 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6850 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6851 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6852 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6853 # From: Victor Duchovni <vic@fine.princeton.edu>
6854 # (hp700-wy: removed obsolete ":nl=^J:";
6855 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6856 hp700-wy|HP700/41 emulating wyse30,
6857 OTbs, am, bw, mir, msgr,
6858 cols#80, it#8, lines#24, xmc#1,
6859 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6860 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6861 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6862 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6863 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6864 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6865 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6866 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6867 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6868 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6869 hp70092|hp70092a|hp70092A|HP 700/92,
6871 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6872 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6873 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6874 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6875 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6876 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6877 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6878 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6879 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6880 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6881 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6882 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6883 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6884 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6886 bobcat|sbobcat|HP 9000 model 300 console,
6887 am, da, db, mir, xhp,
6888 cols#128, it#8, lines#47, xmc#0,
6889 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6890 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6891 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6892 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6893 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6894 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6895 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6896 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6897 lines#94, use=gator,
6898 gator|HP 9000 model 237 emulating AAA,
6900 cols#128, it#8, lines#47,
6901 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6902 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6903 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6904 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6905 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6906 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6907 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6908 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6909 gator-52|HP 9000 model 237 emulating VT52,
6910 cols#128, lines#47, use=vt52,
6911 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6912 lines#94, use=gator-52,
6916 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6919 # Honeywell Bull terminal. Its cursor and function keys send single
6920 # control characters and it has standout/underline glitch. Most programs
6921 # do not like these features/bugs. Visual bell is realized by flashing the
6922 # "keyboard locked" LED.
6923 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6925 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6926 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6927 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6928 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6929 dku7003|Honeywell Bull DKU 7003 all features described,
6932 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6933 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6936 #### Lear-Siegler (adm)
6938 # These guys are long since out of the terminals business, but
6939 # in 1995 many current terminals still have an adm type as one of their
6940 # emulations (usually their stupidest, and usually labeled adm3, though
6941 # these `adm3' emulations normally have adm3a+ capabilities).
6943 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6944 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6945 # was being held to ground would trigger a send of the top line on the screen.
6946 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6947 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6948 # for clearing up this point.)
6950 adm1a|adm1|lsi adm1a,
6953 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6954 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6959 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6960 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6961 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6962 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6963 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6967 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6968 # The following ADM-3A switch settings are assumed for normal operation:
6969 # SPACE U/L_DISP CLR_SCRN 24_LINE
6970 # CUR_CTL LC_EN AUTO_NL FDX
6971 # Other switches may be set for operator convenience or communication
6972 # requirements. I recommend
6973 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6975 # Most of these terminals required an option ROM to support lower case display.
6976 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6977 # socket, you may be out of luck.
6979 # (adm3a: some capabilities merged in from BRl entry -- esr)
6983 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6984 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6985 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6989 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6992 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6993 rmso=\EG, smso=\EG, use=adm3a+,
6994 # A lot of terminals other than adm11s use these. Wherever you see
6995 # use=adm+sgr with some of its capabilities disabled, try the
6996 # disabled ones. They may well work but not have been documented or
6997 # expressed in the using entry. We'd like to cook up an <sgr> but the
6998 # <rmacs>/<smacs> sequences of the using entries vary too much.
6999 adm+sgr|adm style highlight capabilities,
7000 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
7001 smso=\EG4, smul=\EG8,
7002 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
7003 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
7004 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
7005 # be ^Z, according to his entry.
7006 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
7007 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
7010 OTkn#8, cols#80, lines#24,
7011 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
7012 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7013 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
7014 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7015 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7016 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
7018 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
7019 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
7020 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
7021 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
7022 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
7023 # via BRL. That entry asserted <xmc#1>, but I've left that out because
7024 # neither earlier nor later ADMSs have it -- esr)
7026 # You will need to get into the supervisor setup before you can set
7027 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
7028 # see a lot more setup options.
7030 # While in supervisor setup you can also use following codes:
7032 # Ctrl-P Personality character selections (configure for example what
7033 # arrow keys send, if I recall correctly)
7034 # Ctrl-T tabs 1-80 use left&right to move and up to set and
7035 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
7036 # Ctrl-B Binary setup (probably not needed. I think that everything can
7037 # be set using normal setup)
7038 # Ctrl-A Answerback mode (enter answerback message)
7039 # Ctrl-U User friendly mode (normal setup)
7040 # Ctrl-D Defaults entire setup and function keys from EPROM tables
7041 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
7042 # Ctrl-R Reads both setup and functions keys from NVM.
7043 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
7045 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
7046 # RTS/CTS used nowadays with virtually every modem and computer. 19200
7047 # bps works fine with hardware flow control.
7049 # The following null-modem cable should fix this and enable you to use
7050 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
7051 # set ADM-12+ for DTR handshaking from supervisor setup.
7064 OTbs, OTpt, am, mir,
7065 OTug#1, cols#80, it#8, lines#24,
7066 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7067 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7068 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
7069 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
7070 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7071 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7072 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
7074 # (adm20: removed obsolete ":kn#7:" -- esr)
7075 adm20|lear siegler adm20,
7077 cols#80, it#8, lines#24,
7078 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
7079 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
7080 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
7081 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
7083 adm21|lear siegler adm21,
7085 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
7086 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
7087 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
7089 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
7090 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
7091 # removed bogus-looking \200 from before <cup>. -- esr)
7095 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7096 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7097 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
7098 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
7099 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
7100 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7101 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7102 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
7103 # ADM 31 DIP Switches
7105 # This information comes from two versions of the manual for the
7106 # Lear-Siegler ADM 31.
7110 # +-||||-------------------------------------+
7125 # +----------------------------------------------+
7126 # front of case (keyboard)
7128 # S1 - Data Rate - Modem
7129 # S2 - Data Rate - Printer
7130 # ------------------------
7132 # -------------------
7150 # S3 - Interface/Printer/Attributes
7151 # ---------------------------------
7152 # Printer Busy Control
7155 # off off off Busy not active, CD disabled
7156 # off off on Busy not active, CD enabled
7157 # off on off Busy active on J5-20, CD disabled
7158 # on off off Busy active on J5-19, CD disabled - Factory Set.
7159 # on off on Busy active on J5-19, CD enabled
7161 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
7163 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
7165 # sw6 ON enables printer BUSY active LOW - Factory Setting
7166 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
7168 # sw7 ON - steady cursor - Factory Setting
7169 # OFF - blinking cursor
7171 # sw8 ON causes selected attribute character to be displayed
7172 # OFF causes SPACE to be displayed instead - Factory Setting
7178 # sw4 sw1 sw2 sw3 sw4
7179 # ---------------------------
7180 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
7181 # Current Loop disabled - Factory Setting
7182 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
7184 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
7185 # Current Loop Disabled
7187 # sw5 ON disables dot stretching mode - Factory Setting
7188 # OFF enables dot stretching mode
7189 # sw6 ON enables blanking function
7190 # OFF enables underline function - Factory Setting
7191 # sw7 ON causes NULLS to be displayed as NULLS
7192 # OFF causes NULLS to be displayed as SPACES - Factory Setting
7194 # S5 - Word Structure
7195 # -------------------
7196 # sw1 ON enables BREAK key - Factory Setting
7197 # OFF disables BREAK key
7198 # sw2 ON selects 50Hz monitor refresh rate
7199 # OFF selects 60Hz monitor refresh rate - Factory Setting
7201 # Modem Port Selection
7204 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
7205 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
7206 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
7207 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
7208 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
7209 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
7210 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
7211 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
7213 # sw6 ON sends bit 8 a 1 (mark)
7214 # OFF sends bit 8 as 0 (space) - Factory Setting
7215 # sw7 ON selects Block Mode
7216 # OFF selects Conversation Mode - Factory Setting
7217 # sw8 ON selects Full Duplex operation
7218 # OFF selects Half Duplex operation - Factory Setting
7222 # sw1, sw2, sw6, sw7 Reserved - Factory 0
7224 # Printer Port Selection
7225 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
7227 # sw8 ON enables Printer Port
7228 # OFF disables Printer Port - Factory Setting
7230 # S7 - Polling Address
7231 # --------------------
7232 # sw1-7 Establish ASCII character which designates terminal polling address
7234 # OFF = logic 1 - Factory Setting
7235 # sw8 ON enables Polling Option
7236 # OFF disables Polling Option - Factory Setting
7239 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
7241 # This adm31 entry uses underline as the standout mode.
7242 # If the adm31 gives you trouble with standout mode, check the DIP switch in
7243 # position 6, bank @c11, 25% from back end of the circuit board. Should be
7244 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
7245 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
7246 adm31|lsi adm31 with sw6 set for underline mode,
7249 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7250 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7251 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
7252 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
7253 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
7254 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
7255 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
7256 adm31-old|o31|old adm31,
7257 rmul@, smso=\EG4, smul@, use=adm31,
7258 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
7262 if=/usr/share/tabset/vt100,
7263 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
7265 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
7269 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7270 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7271 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
7272 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
7273 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
7274 smir=\Eq, smul@, use=adm+sgr,
7275 # The following termcap for the Lear Siegler ADM-42 leaves the
7276 # "system line" at the bottom of the screen blank (for those who
7277 # find it distracting otherwise)
7278 adm42-ns|lsi adm-42 with no system line,
7279 cbt=\EI\EF \011, clear=\E;\EF \011,
7280 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
7281 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
7282 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
7283 smir=\Eq\EF \011, use=adm42,
7284 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
7285 # The insert mode of this terminal is commented out because it's broken for our
7286 # purposes in that it will shift the position of every character on the page,
7287 # not just the cursor line!
7288 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
7289 adm1178|1178|lsi adm1178,
7291 cols#80, lines#24, xmc#1,
7292 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
7293 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7294 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
7295 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
7296 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
7297 sgr0=\E), smso=\EG4, smul=\EG1,
7301 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
7302 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
7303 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
7305 # ComputerVision Services
7306 # 500 Old Connecticut Path
7310 # Standout mode is dim reverse-video.
7311 pt100|pt200|wren|fenix|prime pt100/pt200,
7313 cols#80, it#8, lines#24,
7314 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
7315 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
7316 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
7317 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
7318 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
7319 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
7320 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
7321 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
7323 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
7324 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
7325 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
7327 cup=\E[%i%p1%d;%p2%dH, use=pt100,
7329 rmso@, smso@, use=pt100,
7330 pt250w|Prime PT250 in 132-column mode,
7331 rmso@, smso@, use=pt100w,
7336 # 3475-A North 1st Street
7338 # Vox: (800)-457-4447
7339 # Fax: (408)-473-1510
7340 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
7342 # Qume was bought by Wyse, but still (as of early 1995) has its own support
7343 # group and production division.
7345 # Discontinued Qume models:
7347 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
7348 # built to replace them, and a qvt119+ which was a 101+ with available wide
7349 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
7350 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
7351 # ANSI-compatible terminals with the qvt323 and qvt61.
7353 # Current Qume models (as of February 1995):
7355 # All current Qume terminals have ANSI-compatible operation modes.
7356 # Qume is still producing the qvt62, which features emulations for other
7357 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
7358 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
7359 # with many emulations including Wyse370, Wyse 325, etc. Their newest
7360 # model is the qvt520, which is vt420-compatible.
7362 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
7364 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
7365 # setup mode. Shift-s should be a configuration save to NVRAM.
7367 qvt101|qvt108|qume qvt 101 and QVT 108,
7370 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
7371 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
7372 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
7373 # What seems to be going on here is that this entry was designed so that
7374 # the normal highlight is bold and standout is dim plus something else
7375 # (reverse-video maybe? But then, are there two <rev> sequences?)
7377 # Added kdch1, kil1, kdl1 based on screenshot -TD:
7378 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
7379 qvt101+|qvt101p|qume qvt 101 PLUS product,
7381 cols#80, lines#24, xmc#0,
7382 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
7383 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7384 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
7385 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7386 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
7387 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
7388 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
7389 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7390 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
7391 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7392 qvt102|qume qvt 102,
7393 cnorm=\E., use=qvt101,
7394 # (qvt103: added <rmam>/<smam> based on init string -- esr)
7395 qvt103|qume qvt 103,
7397 cols#80, it#8, lines#24, vt#3,
7398 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7399 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7400 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
7401 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
7402 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
7403 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
7404 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7405 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
7406 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
7407 rmso=\E[m$<2>, rmul=\E[m$<2>,
7408 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7409 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
7410 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
7411 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
7412 qvt103-w|qume qvt103 132 cols,
7414 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
7415 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
7417 cols#80, lines#24, xmc#0,
7418 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
7419 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
7420 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
7421 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
7422 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
7423 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
7424 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7425 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7426 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
7427 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
7428 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
7429 lines#25, use=qvt119+,
7430 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
7432 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
7433 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
7434 lines#25, use=qvt119+,
7435 qvt203|qvt203+|qume qvt 203 Plus,
7436 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
7437 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
7438 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
7439 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
7440 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
7442 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
7444 # Since a command is present for enabling 25 data lines,
7445 # a specific terminfo entry may be generated for the 203.
7446 # If one is desired for the QVT 119 PLUS then 25 lines must
7447 # be selected in the status line (setup line 9).
7449 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
7451 is2=\E[=40h\E[?3l, use=qvt203,
7452 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
7454 rs2=\E[?3h\E[=40h, use=qvt203,
7456 #### Televideo (tvi)
7459 # 550 East Brokaw Road
7460 # PO Box 49048 95161
7462 # Vox: (408)-954-8333
7463 # Fax: (408)-954-0623
7466 # These require incredible amounts of padding.
7468 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
7469 # Televideo terminals are ANSI and PC-ANSI compatible.
7471 tvi803|televideo 803,
7472 clear=\E*$<10>, use=tvi950,
7474 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
7475 # Switch settings are:
7496 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
7512 # U do CR/LF when CR received
7513 # D do CR when CR received
7535 # S2 6 Cursor down key
7539 # S2 7 Screen colour
7543 # S2 8 DSR status (pin 6)
7547 # S2 9 DCD status (pin 8)
7551 # S2 10 DTR status (pin 20)
7554 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
7555 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
7556 tvi910|televideo model 910,
7558 cols#80, it#8, lines#24, xmc#1,
7559 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7560 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
7561 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
7562 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
7563 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
7564 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7565 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7566 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
7567 # From: Alan R. Rogers <rogers%albany@csnet-relay>
7568 # as subsequently hacked over by someone at SCO
7569 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
7571 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
7574 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
7575 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
7576 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
7577 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
7580 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
7581 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
7582 # D U D D 8O1 D U U U 8E2
7584 # S1 9 Autowrap (U = on, D = off)
7585 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
7586 # S2 1 Mode (U = block, D = conversational)
7587 # S2 2 Duplex (U = half, D = full)
7588 # S2 3 Hertz (U = 50, D = 60)
7589 # S2 4 Edit mode (U = local, D = duplex)
7590 # S2 5 Cursor type (U = underline, D = block)
7591 # S2 6 Cursor down key (U = send ^J, D = send ^V)
7592 # S2 7 Screen colour (U = green on black, D = black on green)
7593 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
7594 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
7595 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
7597 tvi910+|televideo 910+,
7598 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
7599 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
7600 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
7601 ll=\E=7\s, use=tvi910,
7603 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
7604 # <khome> from BRL entry -- esr)
7605 tvi912|tvi914|tvi920|old televideo 912/914/920,
7606 OTbs, OTpt, am, msgr,
7607 cols#80, it#8, lines#24, xmc#1,
7608 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7609 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7610 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
7611 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
7612 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
7613 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7614 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7615 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
7617 # We got some new tvi912c terminals that act really weird on the regular
7618 # termcap, so one of our gurus worked this up. Seems that cursor
7619 # addressing is broken.
7620 tvi912cc|tvi912 at cowell college,
7623 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7624 # From: Benjamin C. W. Sittler
7626 # Someone has put a scanned copy of the manual online at:
7627 # http://vt100.net/televideo/912b-om/
7629 # These terminals were produced ca. 1979, and had a 12" monochrome
7630 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7631 # ASCII, and were generally similar to adm3a but with attributes
7632 # (including some with magic cookies), fancy half-duplex mode, and
7635 # Some operations reqire truly incredible amounts of padding. The
7636 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7637 # are so slow as to be nearly unusable.
7639 # There may or may not have been a separate, earlier series of 912/920
7640 # terminals (without the "B" and "C" suffix); I have never seen one,
7641 # and the manual only describes the "B" and "C" series. The 912 and 920
7642 # are quite distinct from the 914 and 924, which were much nicer non-
7643 # magic-cookie terminals similar to the 950.
7645 # This is a new description for the following TeleVideo terminals,
7646 # distinguished chiefly by their keyboards:
7648 # TVI-912B - very odd layout, no function keys (84 keys)
7649 # TVI-920B - typewriter layout, no function keys (103 keys)
7650 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7651 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7653 # To choose a setting for the TERM variable, start with the model:
7655 # Model || base name
7656 # ----------||-----------
7657 # TVI-912B || tvi912b
7658 # TVI-912C || tvi912c
7659 # TVI-920B || tvi920b
7660 # TVI-920C || tvi920c
7662 # Then add a suffix from the following table describing installed options
7663 # and how you'd like to use the terminal:
7665 # Use Video | Second | Visual | Magic | Page || feature
7666 # Attributes | Page | Bell | Cookies | Print || suffix
7667 # ------------|--------|--------|---------|-------||---------
7668 # No | No | N/A | N/A | No || -unk
7669 # No | No | N/A | N/A | Yes || -p
7670 # No | Yes | No | N/A | No || -2p-unk
7671 # No | Yes | No | N/A | Yes || -2p-p
7672 # No | Yes | Yes | N/A | No || -vb-unk
7673 # No | Yes | Yes | N/A | Yes || -vb-p
7674 # Yes | No | N/A | No | N/A ||
7675 # Yes | No | N/A | Yes | N/A || -mc
7676 # Yes | Yes | No | No | N/A || -2p
7677 # Yes | Yes | No | Yes | N/A || -2p-mc
7678 # Yes | Yes | Yes | No | N/A || -vb
7679 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7681 # So e.g. a model 920 C with second page memory option, visual bell
7682 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7683 # second page memory option and using magic cookies would be
7688 # At 9600 baud, the terminal is prone to overflow its input buffer
7689 # during complex operations (insert/delete
7690 # character/line/screen/page), and it does not signal this over the
7691 # RS232 cable. The typical symptom of an overrun is that the terminal
7692 # starts beeping, and output becomes garbled.
7694 # The padding delays in this terminfo were derived using tack(1)
7695 # running on a Linux box connected to a TVI-920C with a later-model
7696 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7697 # vary. The numbers below seem to give the terminal enough time so
7698 # that it doesn't overflow its input buffer and start losing
7703 # If you want to use the FUNCT key on a tvi912[bc], use the
7704 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7705 # the following table (these also work on the 920 series):
7707 # Unshifted Function Keys:
7709 # Key | capname|| Equivalent
7710 # -----|--------||------------
7711 # F1 | <kf1> || FUNCT + @
7712 # F2 | <kf2> || FUNCT + A
7713 # F3 | <kf3> || FUNCT + B
7714 # F4 | <kf4> || FUNCT + C
7715 # F5 | <kf5> || FUNCT + D
7716 # F6 | <kf6> || FUNCT + E
7717 # F7 | <kf7> || FUNCT + F
7718 # F8 | <kf8> || FUNCT + G
7719 # F9 | <kf9> || FUNCT + H
7720 # F10 | <kf10> || FUNCT + I
7721 # F11 | <kf11> || FUNCT + J
7723 # Shifted Function Keys:
7725 # SHIFT + Key | capname|| Equivalent
7726 # -------------|--------||------------
7727 # SHIFT + F1 | <kf12> || FUNCT + `
7728 # SHIFT + F2 | <kf13> || FUNCT + a
7729 # SHIFT + F3 | <kf14> || FUNCT + b
7730 # SHIFT + F4 | <kf15> || FUNCT + c
7731 # SHIFT + F5 | <kf16> || FUNCT + d
7732 # SHIFT + F6 | <kf17> || FUNCT + e
7733 # SHIFT + F7 | <kf18> || FUNCT + f
7734 # SHIFT + F8 | <kf19> || FUNCT + g
7735 # SHIFT + F9 | <kf20> || FUNCT + h
7736 # SHIFT + F10 | <kf21> || FUNCT + i
7737 # SHIFT + F11 | <kf22> || FUNCT + j
7739 # PORTS AND SWITCH SETTINGS
7741 # Here are the switch settings for the TVI-912B/TVI-920B and
7742 # TVI-912C/TVI-920C:
7744 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7745 # 2: 9600 3: 4800 4: 2400 5: 1200
7746 # 6: 600 7: 300 8: 150 9: 75
7749 # S2 UART/Terminal options:
7751 # 1: Not used Not allowed
7752 # 2: Alternate character set Standard character set
7753 # 3: Full duplex Half duplex
7754 # 4: 50 Hz refresh 60 Hz refresh
7755 # 5: No parity Send parity
7756 # 6: 2 stop bits 1 stop bit
7757 # 7: 8 data bits 7 data bits
7758 # 8: Not used Not allowed on Rev E or lower
7759 # 9: Even parity Odd parity
7760 # 10: Steady cursor Blinking cursor
7761 # (On Rev E or lower, use W25 instead of switch 10.)
7763 # S5 UART/Terminal options:
7765 # 1: P3-6 Not connected DSR received on P3-6
7766 # 2: P3-8 Not connected DCD received on P3-8
7768 # 3 Open, 4 Open: P3-20 Not connected
7769 # 3 Open, 4 Closed: DTR on when terminal is on
7770 # 3 Closed, 4 Open: DTR is connected to RTS
7771 # 3 Closed, 4 Closed: Not allowed
7773 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7774 # all data transmitted out of the modem port (P3) will also be
7775 # transmitted out of the printer port (P4).
7777 # 6 Open, 7 Open: Not allowed
7778 # 6 Open, 7 Closed: 20ma current loop input
7779 # 6 Closed, 7 Open: RS232 input
7780 # 6 Closed, 7 Closed: Not allowed
7783 # If the jumper is installed, the effect will occur (the next time the terminal
7786 # S4/W31: Enables automatic LF upon receipt of CR from
7787 # remote or keyboard.
7788 # S4/W32: Enables transmission of EOT at the end of Send. If not
7789 # installed, a carriage return is sent.
7790 # S4/W33: Disables automatic carriage return in column 80.
7791 # S4/W34: Selects Page Print Mode as initial condition. If not
7792 # installed, Extension Mode is selected.
7794 # NON-STANDARD CAPABILITIES
7796 # Sending <u9> or <u7> returns a cursor position report in the format
7797 # YX\r, where Y and X are as in <cup>. This format is described in
7798 # <u8> and <u6>, but it's not clear how one should write an
7799 # appropriate scanf string, since we need to subtract %' ' from the
7800 # character after reading it. The <u9> capability is used by tack(1)
7801 # to synchronize during padding tests, and seems to work for that
7804 # This description also includes the obsolete termcap capabilities
7805 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7807 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7809 # The FUNCT modifier actually works with every normal key by sending
7810 # ^AX\r, where X is the sequence normally sent by that key. This is a
7811 # sort of meta key not currently describable in terminfo.
7813 # There are quite a few other keys (especially on the 920 models,) but
7814 # they are for the most part only useful in block mode.
7816 # These terminals have lots of forms manipulation features, mainly
7817 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7818 # spaces"; nulls are sentinels for "send X" operations); "send X"
7819 # operations for uploading all or part of the screen; and block-mode
7820 # editing keys (they don't send escape sequences, but manipulate video
7821 # memory directly). Block mode is used for local editing, and protect
7822 # mode (in conjunction with the "write protect" attribute,
7823 # a.k.a. half-intensity outside of protect mode) is used to control
7824 # which parts of the screen are edited/sent/printed (by <mc0>).
7826 # There are at least two major families of ROM, "early" and
7827 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7828 # support a few extra escape sequences for manipulating the off-screen
7829 # memory page, and for sending whole pages back to the host (mainly
7830 # useful in block mode.) The descriptions in this file don't use any
7831 # of those sequences: set cursor position including page (\E-PYX,
7832 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7833 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7834 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7835 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7836 # are as in <cup>, and some "send page" features mainly useful for
7837 # forms manipulation.
7839 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7840 # except that a terminal reset (<is2>) enables the keyboard.
7842 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7843 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7847 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7848 # sequences (I infer that in some TeleVideo terminal they may invert
7849 # and uninvert the display) so the <flash> sequence given here is a
7850 # cheesy page-flip instead.
7852 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7853 # tack(1), so it is not included in the descriptions below.
7855 # It's not clear whether auto_left_margin (<bw>) flag should be set
7856 # for these terminals; tack says yes, so it is set here, but this
7857 # differs from other descriptions I've seen.
7859 # Extension print mode (<mc5>) echoes all characters to the printer
7860 # port [in addition to displaying them] except for the page print mode
7861 # sequence (<mc4>); this is a slight violation of the terminfo
7862 # definition for <mc5> but I don't expect it to cause problems. We
7863 # reset to page print mode in <rs1> since it may have been enabled
7866 # The descriptions with plus signs (+) are building blocks.
7868 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7870 cols#80, it#8, lines#24,
7871 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7872 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7873 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7874 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7875 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7876 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7877 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7878 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7879 u7=\E?, u8=%c%c\r, u9=\E?,
7881 # This isn't included in the basic capabilities because it is
7882 # typically unusable in combination with the full range of video
7883 # attributes, since the magic cookie attributes turn into ASCII
7884 # control characters, and the half-intensity ("protected") attribute
7885 # converts all affected characters to spaces.
7887 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7890 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7891 # exposes no other attributes (half-intensity is the only attribute
7892 # that does not generate a magic cookie.)
7894 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7896 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7899 # Full magic-cookie attribute support, with half-intensity reverse
7900 # video for standout. Note that we add a space in the <dim> sequence
7901 # to give a consistent magic-cookie count. Also note that <sgr> uses
7902 # backspacing (in the TVI-supported order) to apply all requested
7903 # attributes with only a single magic cookie.
7905 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7907 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7909 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7910 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7912 # This uses the second page memory option to save & restore screen
7913 # contents. If your terminal is missing the option, this description
7914 # should still work, but that has not been tested.
7916 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7917 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7918 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7920 # This simulates flashing by briefly toggling to the other page
7923 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7924 bel=\EK$<100>\EK, use=tvi912b+2p,
7926 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7928 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7929 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7930 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7931 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7932 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7933 kf8=^AG\r, kf9=^AH\r,
7935 # Combinations of the basic building blocks
7937 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7938 use=tvi912b+2p, use=tvi912b-unk,
7940 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7941 use=tvi912b+vb, use=tvi912b-unk,
7943 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7944 use=tvi912b+printer, use=tvi912b-unk,
7946 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7947 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7949 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7950 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7952 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7953 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7955 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7956 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7958 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7959 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7961 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7962 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7964 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7965 use=tvi912b+dim, use=tvi912b-unk,
7967 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7968 use=tvi912b+mc, use=tvi912b-unk,
7970 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7971 use=tvi920b+fn, use=tvi912b-unk,
7973 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7974 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7976 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7977 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7979 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7980 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7982 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7983 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7986 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7987 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7990 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7991 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7994 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7995 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7998 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7999 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
8002 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
8003 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
8006 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
8007 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
8009 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
8010 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
8012 # Televideo 921 and variants
8013 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
8014 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
8015 # also added empty <acsc> to suppress tic warning -- esr)
8016 tvi921|televideo model 921 with sysline same as page & real vi function,
8017 OTbs, OTpt, am, hs, xenl, xhp,
8018 cols#80, lines#24, xmc#0,
8019 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8020 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8021 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8022 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
8023 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
8024 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
8025 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
8026 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
8027 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
8028 # without the beeper
8029 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
8030 # also added empty <acsc> to suppress tic warning -- esr)
8031 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
8033 cols#80, lines#24, xmc#0,
8034 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
8035 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
8036 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
8037 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
8038 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8039 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
8040 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8041 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
8042 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
8043 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
8044 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
8045 dl1=\ER$<2*/>, il1=\EE$<2*/>,
8046 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
8047 kil1=\EE$<2*/>, use=tvi92B,
8049 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
8050 # in from a BSD termcap file because it looks like they do something the
8051 # old ones skip -- esr)
8052 tvi924|televideo tvi924,
8053 am, bw, hs, in, mir, msgr, xenl, xon,
8054 cols#80, it#8, lines#24, wsl#80, xmc#0,
8055 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
8056 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
8057 cub1=^H, cud1=^V, cuf1=^L,
8058 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
8059 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
8060 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
8061 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
8062 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
8063 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8064 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
8065 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
8066 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
8067 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
8068 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
8069 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
8070 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
8073 # TVI925 DIP switches. In each of these, D = Down and U = Up,
8075 # Here are the settings for the external (baud) switches (S1):
8078 # 7 8 9 10 [Printer]
8079 # 1 2 3 4 [Main RS232]
8080 # -----------------------------------------------------
8099 # Settings for word length and stop-bits (S1)
8101 # Position Description
8103 # ---------------------------
8110 # S2 (external) settings
8112 # Position Up Dn Description
8113 # --------------------------------------------
8115 # X Duplex edit (transmit editing keys)
8116 # --------------------------------------------
8117 # 2 X 912/920 emulation
8119 # --------------------------------------------
8123 # --------------------------------------------
8127 # --------------------------------------------
8131 # --------------------------------------------
8135 # --------------------------------------------
8139 # --------------------------------------------
8140 # 6 X White on black display
8141 # X Black on white display
8142 # --------------------------------------------
8145 # --------------------------------------------
8148 # --------------------------------------------
8151 # --------------------------------------------
8154 # --------------------------------------------
8155 # 10 X CR/LF (Auto LF)
8158 # S3 (internal switch) settings:
8160 # Position Up Dn Description
8161 # --------------------------------------------
8164 # --------------------------------------------
8167 # --------------------------------------------
8170 # --------------------------------------------
8173 # --------------------------------------------
8176 # --------------------------------------------
8177 # 4 X Blinking block cursor
8179 # --------------------------------------------
8180 # 4 X Blinking underline cursor
8182 # --------------------------------------------
8183 # 4 X Steady block cursor
8185 # --------------------------------------------
8186 # 4 X Steady underline cursor
8188 # --------------------------------------------
8189 # 6 X Screen blanking timer (ON)
8190 # X Screen blanking timer (OFF)
8191 # --------------------------------------------
8192 # 7 X Page attributes
8194 # --------------------------------------------
8195 # 8 X DCD disconnected
8197 # --------------------------------------------
8198 # 9 X DSR disconnected
8200 # --------------------------------------------
8201 # 10 X DTR Disconnected
8203 # --------------------------------------------
8205 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
8206 tvi925|televideo 925,
8207 OTbs, am, bw, hs, ul,
8208 cols#80, lines#24, xmc#1,
8209 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
8210 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8211 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
8212 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
8213 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
8214 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8215 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8216 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8217 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
8218 tsl=\Eh\Ef, use=adm+sgr,
8219 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
8220 # to avoid "magic cookie" standout glitch:
8221 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
8223 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
8225 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
8226 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
8227 # for additional capabilities,
8228 # The following tvi descriptions from B:pjphar and virus!mike
8229 # is for all 950s. It sets the following attributes:
8230 # full duplex (\EDF) write protect off (\E()
8231 # conversation mode (\EC) graphics mode off (\E%)
8232 # white on black (\Ed) auto page flip off (\Ew)
8233 # turn off status line (\Eg) clear status line (\Ef\r)
8234 # normal video (\E0) monitor mode off (\EX or \Eu)
8235 # edit mode (\Er) load blank char to space (\Ee\040)
8236 # line edit mode (\EO) enable buffer control (^O)
8237 # protect mode off (\E\047) duplex edit keys (\El)
8238 # program unshifted send key to send line all (\E016)
8239 # program shifted send key to send line unprotected (\E004)
8240 # set the following to nulls:
8241 # field delimiter (\Ex0\200\200)
8242 # line delimiter (\Ex1\200\200)
8243 # start-protected field delimiter (\Ex2\200\200)
8244 # end-protected field delimiter (\Ex3\200\200)
8245 # set end of text delimiter to carriage return/null (\Ex4\r\200)
8247 # TVI 950 Switch Setting Reference Charts
8251 # S1 1 2 3 4 5 6 7 8 9 10
8252 # +-----------------------+-----+-----+-----------------------+
8253 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
8255 # +------+-----------------------+-----+-----+-----------------------+
8256 # | Up | See | 7 | 2 | See |
8257 # +------+-----------------------+-----+-----+-----------------------+
8258 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
8259 # +------+-----------------------+-----+-----+-----------------------+
8262 # S2 1 2 3 4 5 6 7 8 9 10
8263 # +-----+-----+-----------------+-----+-----------+-----+-----+
8264 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
8265 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8266 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
8267 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8268 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
8269 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
8273 # +-----------+-----+-----+-----+-----+-----------+
8274 # | Display | 1 | 2 | 3 | 4 | Baud |
8275 # +-----------+-----+-----+-----+-----+ |
8276 # | Printer | 7 | 8 | 9 | 10 | Rate |
8277 # +-----------+-----+-----+-----+-----+-----------+
8278 # | D | D | D | D | 9600 |
8279 # | U | D | D | D | 50 |
8280 # | D | U | D | D | 75 |
8281 # | U | U | D | D | 110 |
8282 # | D | D | U | D | 135 |
8283 # | U | D | U | D | 150 |
8284 # | D | U | U | D | 300 |
8285 # | U | U | U | D | 600 |
8286 # | D | D | D | U | 1200 |
8287 # | U | D | D | U | 1800 |
8288 # | D | U | D | U | 2400 |
8289 # | U | U | D | U | 3600 |
8290 # | D | D | U | U | 4800 |
8291 # | U | D | U | U | 7200 |
8292 # | D | U | U | U | 9600 |
8293 # | U | U | U | U | 19200 |
8294 # +-----+-----+-----+-----+-----------+
8297 # +-----+-----+-----+-----------+
8298 # | 3 | 4 | 5 | Parity |
8299 # +-----+-----+-----+-----------+
8300 # | X | X | D | None |
8301 # | D | D | U | Odd |
8302 # | D | U | U | Even |
8303 # | U | D | U | Mark |
8304 # | U | U | U | Space |
8305 # +-----+-----+-----+-----------+
8309 # +-----+-----+-----------------+
8310 # | 7 | 8 | Communication |
8311 # +-----+-----+-----------------+
8312 # | D | D | Half Duplex |
8313 # | D | U | Full Duplex |
8316 # +-----+-----+-----------------+
8318 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
8319 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
8320 # should be present and all tvi native modes use the same string for this.
8321 # Finally, note that BSD has cud1=^V. -- esr)
8322 tvi950|televideo 950,
8323 OTbs, am, hs, mir, msgr, xenl, xon,
8324 cols#80, it#8, lines#24, xmc#1,
8325 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
8326 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8327 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8328 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
8329 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
8331 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
8332 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
8333 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
8334 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8335 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8336 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
8337 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
8340 # is for 950 with two pages adds the following:
8341 # set 48 line page (\E\\2)
8342 # place cursor at page 0, line 24, column 1 (\E-07 )
8343 # set local (no send) edit keys (\Ek)
8345 # two page 950 adds the following:
8346 # when entering ex, set 24 line page (\E\\1)
8347 # when exiting ex, reset 48 line page (\E\\2)
8348 # place cursor at 0,24,1 (\E-07 )
8349 # set duplex (send) edit keys (\El) when entering vi
8350 # set local (no send) edit keys (\Ek) when exiting vi
8352 tvi950-2p|televideo950 w/2 pages,
8353 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
8354 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8355 smkx=\El, use=tvi950,
8357 # is for 950 with four pages adds the following:
8358 # set 96 line page (\E\\3)
8359 # place cursor at page 0, line 24, column 1 (\E-07 )
8361 # four page 950 adds the following:
8362 # when entering ex, set 24 line page (\E\\1)
8363 # when exiting ex, reset 96 line page (\E\\3)
8364 # place cursor at 0,24,1 (\E-07 )
8366 tvi950-4p|televideo950 w/4 pages,
8367 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
8368 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8369 smkx=\El, use=tvi950,
8371 # <is2> for reverse video 950 changes the following:
8372 # set reverse video (\Ed)
8374 # set vb accordingly (\Ed ...delay... \Eb)
8376 tvi950-rv|televideo950 rev video,
8377 flash=\Ed$<200/>\Eb,
8378 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
8381 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
8382 tvi950-rv-2p|televideo950 rev video w/2 pages,
8383 flash=\Ed$<200/>\Eb,
8384 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
8385 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8386 smkx=\El, use=tvi950,
8388 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
8389 tvi950-rv-4p|televideo950 rev video w/4 pages,
8390 flash=\Ed$<200/>\Eb,
8391 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
8392 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
8393 smkx=\El, use=tvi950,
8394 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
8395 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
8396 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
8397 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
8398 # the :ko: string had :cl: in it, which means that one of the original
8399 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
8400 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
8401 # ko implies -- esr)
8402 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
8404 tvi955|televideo 955,
8407 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
8408 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
8409 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
8410 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
8411 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
8412 rmam=\E[=7l, rmxon=^N,
8413 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
8414 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
8416 tvi955-w|955-w|televideo955 w/132 cols,
8418 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
8419 # use half-intensity as normal mode, full intensity as <bold>
8420 tvi955-hb|955-hb|televideo955 half-bright,
8421 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
8422 sgr0=\EG0\E[=5h, use=tvi955,
8423 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
8424 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
8425 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
8426 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
8427 # it does to the function keys. I deduced <rmam>/<smam>.
8428 # also added empty <acsc> to suppress tic warning, -- esr)
8429 tvi970|televideo 970,
8430 OTbs, OTpt, am, da, db, mir, msgr,
8431 cols#80, it#8, lines#24,
8432 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
8433 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
8434 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
8435 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
8436 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
8437 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
8438 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8439 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
8440 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
8441 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
8442 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
8443 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
8444 smul=\E[4m, vpa=\E[%i%p1%dd,
8445 tvi970-vb|televideo 970 with visual bell,
8446 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
8448 tvi970-2p|televideo 970 with using 2 pages of memory,
8449 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
8451 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
8452 # per line (rather than 40), Esc K chooses the normal character set. Not sure
8453 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
8454 # <smul> strings are klutzy, but at least use no screen space.
8455 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
8456 # its absence means <smam>=\Ev isn't safe to use. -- esr)
8457 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
8458 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
8459 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
8460 tvipt|televideo personal terminal,
8463 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
8464 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
8465 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
8466 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
8467 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
8468 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
8469 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
8470 tvi9065|televideo 9065,
8471 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
8472 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
8474 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
8475 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
8476 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
8477 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
8478 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
8479 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
8480 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
8481 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8482 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
8483 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
8485 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
8486 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
8487 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
8488 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
8489 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8490 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
8491 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
8492 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
8493 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
8494 pfx=\E|%p1%{48}%+%c1%p2%s\031,
8495 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
8496 rep=\E[%p2%db%p1%c, rev=\EG4,
8497 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
8498 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
8499 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
8500 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
8501 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
8502 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
8503 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
8504 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
8505 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
8506 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
8510 # In September 1993, Visual Technology of Westboro, Massachusetts,
8511 # merged with White Pine Software of Nashua, New Hampshire.
8513 # White Pine Software may be contacted at +1 603/886-9050.
8514 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
8517 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
8518 # Recently I hacked together the following termcap for Visual
8519 # Technology's Visual 50 terminal. It's a slight modification of
8521 # It's intended to run when the Visual 50 is in vt52 emulation mode
8522 # (I know what you're thinking; if it's emulating a vt52, then why
8523 # another termcap? Well, it turns out that the Visual 50 can handle
8524 # <dl1> and db(?) among other things, which the vt52 can't)
8525 # The termcap works OK for the most part. The only problem is on
8526 # character inserts. The whole line gets painfully redrawn for each
8527 # character typed. Any suggestions?
8528 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
8529 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
8530 # disguise; <kf7>-<kf9> are really l1-l3.
8532 OTbs, OTpt, am, da, db, msgr,
8533 cols#80, it#8, lines#24,
8534 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
8535 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8536 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
8537 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
8538 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
8539 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
8540 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
8541 # this one was BSD & SCO's vi50
8542 vi50adm|visual 50 in adm3a mode,
8544 cols#80, it#8, lines#24,
8545 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8546 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
8547 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
8548 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
8550 # From: Jeff Siegal <jbs@quiotix.com>
8552 OTbs, am, mir, msgr,
8553 cols#80, it#8, lines#24,
8554 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
8555 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8556 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
8557 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
8558 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
8561 # Visual 200 from BRL
8562 # The following switch settings are assumed for normal operation:
8563 # FULL_DUPLEX SCROLL CR
8564 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
8565 # Other switches may be set for operator convenience or communication
8567 # Character insertion is kludged in order to get around the "beep" misfeature.
8568 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
8569 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
8570 # and <dl1> strings, but we seem to get along fine without them.
8572 OTbs, OTpt, am, mir, msgr,
8573 OTkn#10, cols#80, it#8, lines#24,
8574 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
8575 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
8576 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
8577 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
8578 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8579 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
8580 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
8581 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
8582 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
8583 rmacs=\EG, rmkx=\E>, rmso=\E3,
8584 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
8585 smkx=\E=, smso=\E4, tbc=\Eg,
8586 # The older Visuals didn't come with function keys. This entry uses
8587 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
8588 # If your version of vi doesn't support function keys you may want
8590 vi200-f|visual 200 no function keys,
8591 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
8592 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
8593 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
8595 vi200-rv|visual 200 reverse video,
8596 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
8598 # the function keys are programmable but we don't reprogram them to their
8599 # default values with <is2> because programming them is very verbose. maybe
8600 # an initialization file should be made for the 300 and they could be stuck
8602 # (vi300: added <rmam>/<smam> based on init string -- esr)
8603 vi300|visual 300 ansi x3.64,
8606 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
8607 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
8608 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
8610 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
8611 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8612 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
8613 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
8614 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
8615 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
8616 smso=\E[1m, smul=\E[4m,
8617 # some of the vi300s have older firmware that has the command
8618 # sequence for setting editing extent reversed.
8619 vi300-old|visual 300 with old firmware (set edit extent reversed),
8620 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8623 # Visual 500 prototype entry from University of Wisconsin.
8624 # The best place to look for the escape sequences is page A1-1 of the
8625 # Visual 500 manual. The initialization sequence given here may be
8626 # overkill, but it does leave out some of the initializations which can
8627 # be done with the menus in set-up mode.
8628 # The :xp: line below is so that emacs can understand the padding requirements
8629 # of this slow terminal. :xp: is 10 time the padding factor.
8630 # (vi500: removed unknown :xp#4: termcap;
8631 # also added empty <acsc> to suppress tic warning -- esr)
8634 cols#80, it#8, lines#33,
8635 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8636 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8637 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8638 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8639 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8641 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8642 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8643 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8644 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8646 # The visual 550 is a visual 300 with tektronix graphics,
8647 # and with 33 lines. clear screen is modified here to
8648 # also clear the graphics.
8649 vi550|visual 550 ansi x3.64,
8651 clear=\030\E[H\E[2J, use=vi300,
8653 vi603|visual603|visual 603,
8655 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8656 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8657 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8658 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8659 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8660 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8661 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8667 # 3471 North First Street
8668 # San Jose, CA 95134
8669 # Vox: (408)-473-1200
8670 # Fax: (408) 473-1222
8671 # Web: http://www.wyse.com
8673 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8674 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8675 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8676 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8678 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8679 # They now own the Qume and Amdek brands, too. So these are the people to
8680 # talk with about all Link, Qume, and Amdek terminals.
8682 # These entries include a few small fixes.
8683 # I canceled the bel capacities in the vb entries.
8684 # I made two trivial syntax fixes in the wyse30 entry.
8685 # I made some entries relative to adm+sgr.
8688 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8690 # Although the Wyse 30 can support more than one attribute
8691 # it requires magic cookies to do so. Many applications do not
8692 # function well with magic cookies. The following terminfo uses
8693 # the protect mode to support one attribute (dim) without cookies.
8694 # If more than one attribute is needed then the wy30-mc terminfo
8697 wy30|wyse30|Wyse 30,
8698 am, bw, hs, mc5i, mir, msgr, xon,
8699 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8700 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8701 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8702 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8703 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8704 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8705 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8706 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8707 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8708 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8709 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8710 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8711 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8712 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8713 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8714 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8715 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8716 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8717 smso=\E`7\E), tbc=\E0, tsl=\EF,
8719 # This terminal description uses the non-hidden attribute mode
8720 # (with magic cookie).
8722 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8723 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8726 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8727 rmcup=\EG0, rmso=\EG0,
8728 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8729 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8730 smso=\EG4, use=wy30, use=adm+sgr,
8731 # The mandatory pause used by <flash> does not work with
8732 # older versions of terminfo. If you see this effect then
8733 # unset xon and delete the / from the delay.
8734 # i.e. change $<100/> to $<100>
8735 wy30-vb|wyse30-vb|wyse 30 visible bell,
8738 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8739 # Normal) without magic cookies by using the protect mode.
8740 # The following description uses this feature, but when more
8741 # than one attribute is put on the screen at once, all attributes
8742 # will be changed to be the same as the last attribute given.
8743 # The Wyse 50 can support more attributes when used with magic
8744 # cookies. The wy50-mc terminal description uses magic cookies
8745 # to correctly handle multiple attributes on a screen.
8747 wy50|wyse50|Wyse 50,
8748 am, bw, hs, mc5i, mir, msgr, xon,
8749 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8750 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8751 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8752 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8753 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8754 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8755 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8756 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8757 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8758 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8759 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8760 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8761 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8762 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8763 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8764 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8765 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8766 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8767 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8768 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8769 smso=\E`6\E), tbc=\E0, tsl=\EF,
8771 # This terminal description uses the non-hidden attribute mode
8772 # (with magic cookie).
8774 # The mandatory pause used by flash does not work with some
8775 # older versions of terminfo. If you see this effect then
8776 # unset <xon> and delete the / from the delay.
8777 # i.e. change $<100/> to $<100>
8778 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8779 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8782 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8783 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8784 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8785 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8786 smso=\EGt, use=wy50, use=adm+sgr,
8787 wy50-vb|wyse50-vb|wyse 50 visible bell,
8789 wy50-w|wyse50-w|wyse 50 132-column,
8790 cols#132, lw#7, nlab#16, wsl#97,
8791 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8793 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8797 # The Wyse 350 is a Wyse 50 with color.
8798 # Unfortunately this means that it has magic cookies.
8799 # The color attributes are designed to overlap the reverse, dim and
8800 # underline attributes. This is nice for monochrome applications
8801 # because you can make underline stuff green (or any other color)
8802 # but for true color applications it's not so hot because you cannot
8803 # mix color with reverse, dim or underline.
8804 # To further complicate things one of the attributes must be
8805 # black (either the foreground or the background). In reverse video
8806 # the background changes color with black letters. In normal video
8807 # the foreground changes colors on a black background.
8808 # This terminfo uses some of the more advanced features of curses
8809 # to display both color and blink. In the final analysis I am not
8810 # sure that the wy350 runs better with this terminfo than it does
8811 # with the wy50 terminfo (with user adjusted colors).
8813 # The mandatory pause used by flash does not work with
8814 # older versions of terminfo. If you see this effect then
8815 # unset xon and delete the / from the delay.
8816 # i.e. change $<100/> to $<100>
8818 # Bug: The <op> capability resets attributes.
8819 wy350|wyse350|Wyse 350,
8820 am, bw, hs, mc5i, mir, xon,
8821 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8823 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8824 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8825 cub1=^H, cud1=^J, cuf1=^L,
8826 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8827 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8828 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8829 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8830 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8831 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8832 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8833 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8834 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8835 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8836 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8837 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8838 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8839 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8840 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8841 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8842 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8843 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8844 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8845 wy350-vb|wyse350-vb|wyse 350 visible bell,
8847 wy350-w|wyse350-w|wyse 350 132-column,
8848 cols#132, lw#7, nlab#16, wsl#97,
8849 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8851 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8854 # This terminfo description is untested.
8855 # The wyse100 emulates an adm31, so the adm31 entry should work.
8859 cols#80, lines#24, xmc#1,
8860 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8861 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8862 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8863 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8864 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8865 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8866 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8868 # The Wyse 120/150 has most of the features of the Wyse 60.
8869 # This terminal does not need padding up to 9600 baud!
8870 # <msgr> should be set but the clear screen fails when in
8871 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8874 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8875 am, bw, hs, km, mc5i, mir, msgr, xon,
8876 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8877 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8878 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8879 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8880 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8881 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8882 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8883 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8884 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8885 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8886 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8887 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8888 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8889 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8890 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8891 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8892 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8893 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8894 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8895 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8896 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8897 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8899 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8900 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8901 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8902 tbc=\E0, tsl=\EF, use=adm+sgr,
8904 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8905 cols#132, lw#7, nlab#16, wsl#97,
8906 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8907 rs2=\E`;$<70>, use=wy120,
8909 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8910 lh@, lines#25, lw@, nlab@,
8911 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8913 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8914 lh@, lines#25, lw@, nlab@,
8915 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8917 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8920 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8923 # The Wyse 60 is like the Wyse 50 but with more padding.
8924 # The reset strings are slow and the pad times very depending
8925 # on other parameters such as font loading. I have tried
8926 # to follow the following outline:
8928 # <rs1> -> set personality
8929 # <rs2> -> set number of columns
8930 # <rs3> -> set number of lines
8931 # <is1> -> select the proper font
8932 # <is2> -> do the initialization
8933 # <is3> -> set up display memory (2 pages)
8935 # The Wyse 60's that have vt100 emulation are slower than the
8936 # older Wyse 60's. This change happened mid-1987.
8937 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8939 # The meta key is only half right. This terminal will return the
8940 # high order bit set when you hit CTRL-function_key
8942 # It may be useful to assign two function keys with the
8943 # values \E=(\s look at old data in page 1
8944 # \E=W, look at bottom of page 1
8945 # where \s is a space ( ).
8948 # The Wyse 60 runs faster when the XON/XOFF
8949 # handshake is turned off.
8951 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8952 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8953 wy60|wyse60|Wyse 60,
8954 am, bw, hs, km, mc5i, mir, msgr,
8955 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8956 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8957 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8958 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8959 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8960 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8961 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8962 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8963 ip=$<3>, is1=\EcB0\EcC1,
8964 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8965 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8966 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8967 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8968 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8969 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8970 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8971 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8972 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8973 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8974 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8975 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8976 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8977 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8978 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8979 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8980 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8981 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8982 tbc=\E0, tsl=\EF, use=adm+sgr,
8984 wy60-w|wyse60-w|wyse 60 132-column,
8985 cols#132, lw#7, nlab#16, wsl#97,
8986 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8987 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8989 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8990 lh@, lines#25, lw@, nlab@,
8991 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8992 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8993 lh@, lines#25, lw@, nlab@,
8994 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8996 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8998 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8999 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
9000 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
9001 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
9002 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
9003 cols#132, lw#7, nlab#16, wsl#97,
9004 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9005 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
9006 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
9008 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
9009 lh@, lines#43, lw@, nlab@,
9010 pln@, rs3=\Ee+$<150>, use=wy60-42,
9011 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
9012 lh@, lines#43, lw@, nlab@,
9013 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
9015 wy60-vb|wyse60-vb|Wyse 60 visible bell,
9017 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
9020 # The Wyse-99GT looks at lot like the Wyse 60 except that it
9021 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
9022 # setup parameter controls the number of lines on the screen.
9023 # For the Wyse 99GT the "lines" setup parameter controls the
9024 # number of lines in a page. The screen can display 25 lines max.
9025 # The Wyse-99GT also has personalities for the VT220 and
9026 # Tektronix 4014. But this has no bearing on the native mode.
9028 # (msgr) should be set but the clear screen fails when in
9029 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9030 # then set msgr, else use msgr@.
9032 # u0 -> enter Tektronix mode
9033 # u1 -> exit Tektronix mode
9035 wy99gt|wyse99gt|Wyse 99gt,
9037 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
9038 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
9039 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
9040 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
9041 u0=\E~>\E8, u1=\E[42h, use=wy60,
9043 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
9044 cols#132, lw#7, nlab#16, wsl#97,
9045 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
9046 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
9049 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
9050 lh@, lines#25, lw@, nlab@,
9051 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
9053 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
9054 lh@, lines#25, lw@, nlab@,
9055 pln@, rs2=\E`;$<150>, use=wy99gt-w,
9057 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
9060 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
9063 # Can't set tabs! Other bugs (ANSI mode only):
9064 # - can't redefine function keys (anyway, key redefinition in ANSI mode
9065 # is too much complex to be described);
9066 # - meta key can't be described (the terminal forgets it when reset);
9067 # The xon-xoff handshaking can't be disabled while in ansi personality, so
9068 # emacs can't work at speed greater than 9600 baud. No padding is needed at
9070 # dch1 has been commented out because it causes annoying glittering when
9071 # vi deletes one character at the beginning of a line with tabs in it.
9072 # dch makes sysgen(1M) have a horrible behaviour when deleting
9073 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
9074 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
9075 # not, so smir and rmir are commented out as well.
9076 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9077 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
9078 am, km, mc5i, mir, msgr, xenl,
9079 cols#80, it#8, lines#25, vt#3,
9080 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
9081 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9082 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
9083 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
9084 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
9085 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
9086 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
9087 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
9088 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
9089 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
9090 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
9091 il1=\E[L, ind=\n$<1>, invis=\E[8m,
9092 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
9093 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9094 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
9095 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
9096 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
9097 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
9098 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
9099 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
9100 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
9101 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
9102 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
9104 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
9105 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
9106 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
9108 # This is the american terminal. Here tabs work fine.
9109 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9110 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
9111 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
9113 # This terminal (firmware version 02) has a lot of bugs:
9115 # - other bugs in ANSI modes (see above).
9116 # This description disables handshaking when using cup. This is because
9117 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
9118 # cannot be used at speeds greater than 9600 baud, because at greater
9119 # speeds handshaking is needed even for character sending. If you use
9120 # DTR handshaking, you can use even greater speeds.
9121 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9122 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
9123 am, bw, hs, km, mc5i, mir, msgr, xon,
9124 cols#80, it#8, lines#25, wsl#46,
9125 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
9126 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
9127 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
9128 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9129 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
9130 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
9131 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
9133 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
9134 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
9135 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
9136 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
9137 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
9138 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
9139 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9140 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
9141 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
9142 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
9143 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
9144 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
9145 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
9146 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
9148 # This is the american terminal. Here tabs work.
9149 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
9150 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
9151 hts=\E1, tbc=\E0, use=wy99f,
9154 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
9155 # The reset strings are slow and the pad times very depending
9156 # on other parameters such as font loading. I have tried
9157 # to follow the following outline:
9159 # <rs1> -> set personality
9160 # <rs2> -> set number of columns
9161 # <rs3> -> set number of lines
9162 # <is1> -> select the proper font
9163 # <is2> -> do the initialization
9164 # <is3> -> set up display memory (2 pages)
9166 # The display memory may be used for either text or graphics.
9167 # When "Display Memory = Shared" the terminal will have more pages
9168 # but garbage may be left on the screen when you switch from
9169 # graphics to text. If "Display Memory = Unshared" then the
9170 # text area will be only one page long.
9172 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
9173 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9174 wy160|wyse160|Wyse 160,
9175 am, bw, hs, km, mc5i, mir, msgr,
9176 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
9177 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9178 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
9179 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9180 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
9181 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
9182 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
9183 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
9184 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9185 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9186 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9187 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9188 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9189 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9190 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9191 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
9192 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
9193 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9194 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9195 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
9196 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
9197 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
9198 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
9199 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9200 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9201 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9202 tbc=\E0, tsl=\EF, use=adm+sgr,
9204 wy160-w|wyse160-w|wyse 160 132-column,
9205 cols#132, lw#7, nlab#16, wsl#90,
9206 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
9207 rs2=\EeF$<150>\E`;$<150>, use=wy160,
9209 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
9210 lh@, lines#25, lw@, nlab@,
9211 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
9212 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
9213 lh@, lines#25, lw@, nlab@,
9214 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
9216 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
9218 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
9219 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
9220 rs3=\Ee*$<150>, use=wy160,
9221 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
9222 cols#132, lw#7, nlab#16, wsl#90,
9223 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
9224 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
9226 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
9227 lh@, lines#43, lw@, nlab@,
9228 pln@, rs3=\Ee+$<150>, use=wy160-42,
9229 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
9230 lh@, lines#43, lw@, nlab@,
9231 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
9233 wy160-vb|wyse160-vb|Wyse 160 visible bell,
9235 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
9238 # The Wyse 75 is a vt100 lookalike without advanced video.
9240 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
9241 # Underline) without magic cookies. The following description
9242 # uses this capability, but when more than one attribute is
9243 # put on the screen at once, all attributes will be changed
9244 # to be the same as the last attribute given.
9245 # The Wyse 75 can support more attributes when used with magic
9246 # cookies. The wy75-mc terminal description uses magic cookies
9247 # to correctly handle multiple attributes on a screen.
9249 wy75|wyse75|wyse 75,
9250 am, hs, mc5i, mir, msgr, xenl, xon,
9251 cols#80, lines#24, ma#1, pb#1201, wsl#78,
9252 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9253 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
9254 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
9255 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9256 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9257 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
9258 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
9259 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
9260 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
9261 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
9262 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9263 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9264 ind=\n$<2>, ip=$<1>,
9265 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
9266 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
9267 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
9268 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9269 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9270 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
9271 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
9272 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9273 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
9274 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
9275 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
9276 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
9277 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
9279 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
9280 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9281 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
9282 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
9284 # This terminal description uses the non-hidden attribute mode
9285 # (with magic cookie).
9287 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
9290 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
9291 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
9292 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
9293 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
9295 wy75-vb|wyse75-vb|wyse 75 with visible bell,
9298 wy75-w|wyse75-w|wyse 75 in 132 column mode,
9300 rs2=\E[35h\E[?3h$<80>, use=wy75,
9301 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
9305 # Wyse 85 emulating a vt220 7 bit mode.
9306 # 24 line screen with status line.
9308 # The vt220 mode permits more function keys but it wipes out
9309 # the escape key. I strongly recommend that <f11> be set to
9311 # The terminal may have to be set for 8 data bits and 2 stop
9312 # bits for the arrow keys to work.
9313 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
9314 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
9315 # <dch> leave trash on the screen when used without XON/XOFF.
9317 wy85|wyse85|wyse 85,
9318 am, hs, mc5i, mir, msgr, xenl, xon,
9319 cols#80, it#8, lines#24, wsl#80,
9320 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9321 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9322 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9323 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9324 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9325 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9326 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9327 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9328 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9329 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9330 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9331 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9332 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9333 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9334 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9335 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
9336 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
9337 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
9338 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
9339 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
9340 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
9341 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9342 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9343 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9344 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9346 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9347 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9348 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9349 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
9351 # Wyse 85 with visual bell.
9352 wy85-vb|wyse85-vb|wyse 85 with visible bell,
9353 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
9355 # Wyse 85 in 132-column mode.
9356 wy85-w|wyse85-w|wyse 85 in 132-column mode,
9358 rs2=\E[35h\E[?3h$<70>, use=wy85,
9360 # Wyse 85 in 132-column mode with visual bell.
9361 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
9364 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
9365 # This copes with an apparent firmware bug in the wy85. He writes:
9366 # "What I did was change leave the terminal cursor keys set to Normal
9367 # (instead of application), and change \E[ to \233 for all the keys in
9368 # terminfo. At one point, I found some reference indicating that this
9369 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
9370 # me), but I can't find that and the server under my bookmark to "Wyse
9371 # Technical" isn't responding. So there's the question of wether the wy85
9372 # terminfo should reflect the manufactuer's intended behaviour of the terminal
9374 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
9375 am, hs, mc5i, mir, msgr, xenl, xon,
9376 cols#80, it#8, lines#24, wsl#80,
9377 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9378 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9379 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
9380 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9381 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9382 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9383 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
9384 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
9385 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
9386 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
9387 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
9388 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
9389 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
9390 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
9391 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
9392 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
9393 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
9394 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
9395 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
9396 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
9397 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
9398 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
9399 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
9400 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
9401 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
9402 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
9403 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
9405 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
9406 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9407 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9408 tsl=\E[40h\E7\E[25;%i%p1%dH,
9410 # Wyse 185 emulating a vt320 7 bit mode.
9412 # This terminal always displays 25 lines. These lines may be used
9413 # as 24 data lines and a terminal status line (top or bottom) or
9414 # 25 data lines. The 48 and 50 line modes change the page size
9415 # and not the number of lines on the screen.
9417 # The Compose Character key can be used as a meta key if changed
9420 wy185|wyse185|wyse 185,
9421 am, hs, km, mc5i, mir, msgr, xenl, xon,
9422 cols#80, it#8, lines#24, wsl#80,
9423 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9424 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9425 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9426 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9427 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9428 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9429 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
9430 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9431 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
9432 el=\E[K, el1=\E[1K, enacs=\E)0,
9433 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
9434 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
9435 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
9436 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9437 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
9438 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9439 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
9440 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9441 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
9442 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
9443 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9444 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
9445 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
9446 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
9447 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
9448 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9449 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9450 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9451 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9452 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9453 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9454 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
9457 # Wyse 185 with 24 data lines and top status (terminal status)
9458 wy185-24|wyse185-24|wyse 185 with 24 data lines,
9460 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9463 # Wyse 185 with visual bell.
9464 wy185-vb|wyse185-vb|wyse 185+flash,
9467 # Wyse 185 in 132-column mode.
9468 wy185-w|wyse185-w|wyse 185 in 132-column mode,
9470 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9471 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
9473 # Wyse 185 in 132-column mode with visual bell.
9474 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
9477 # wy325 terminfo entries
9478 # Done by Joe H. Davis 3-9-92
9480 # lines 25 columns 80
9482 wy325|wyse325|Wyse epc,
9483 am, bw, hs, mc5i, mir,
9484 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9485 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9486 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9487 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9488 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9489 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9490 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9491 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9492 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9493 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9494 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9495 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9496 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9497 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9498 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
9499 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9500 mc0=\EP, mc4=^T, mc5=\Ed#,
9501 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9502 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9503 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9504 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
9505 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9507 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9508 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9509 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
9510 tsl=\EF, use=adm+sgr,
9513 # lines 24 columns 80 vb
9515 wy325-vb|wyse325-vb|wyse-325 with visual bell,
9519 # lines 24 columns 132
9521 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
9522 cols#132, lw#7, nlab#16, wsl#97,
9523 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9524 rs2=\E`;$<70>, use=wy325,
9526 # lines 25 columns 80
9528 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
9529 lh@, lines#25, lw@, nlab@,
9530 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9532 # lines 25 columns 132
9534 wy325-25w|wyse325-25w|wy325 132 columns,
9535 lh@, lines#25, lw@, nlab@,
9536 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9538 # lines 25 columns 132 vb
9540 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
9544 # lines 42 columns 80
9546 wy325-42|wyse325-42|wyse-325 42 lines,
9547 lh@, lines#42, lw@, nlab@,
9548 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
9550 # lines 42 columns 132
9552 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
9553 lh@, lines#42, lw@, nlab@,
9554 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9556 # lines 42 columns 132 vb
9558 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
9561 # lines 43 columns 80
9563 wy325-43|wyse325-43|wyse-325 43 lines,
9564 lh@, lines#43, lw@, nlab@,
9567 # lines 43 columns 132
9569 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
9570 lh@, lines#43, lw@, nlab@,
9571 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
9573 # lines 43 columns 132 vb
9575 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
9578 # Wyse 370 -- 24 line screen with status line.
9580 # The terminal may have to be set for 8 data bits and 2 stop
9581 # bits for the arrow keys to work.
9583 # If you change keyboards the terminal will send different
9585 # The following definition is for the basic terminal without
9588 # <u0> -> enter Tektronix 4010/4014 mode
9589 # <u1> -> exit Tektronix 4010/4014 mode
9590 # <u2> -> enter ASCII mode (from any ANSI mode)
9591 # <u3> -> exit ASCII mode (goto native ANSI mode)
9592 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
9593 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
9595 # Bug: The <op> capability resets attributes.
9596 wy370-nk|wyse 370 without function keys,
9597 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
9598 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
9599 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9600 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9601 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9602 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9603 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9604 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
9605 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
9606 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
9607 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
9608 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
9609 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
9610 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
9611 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
9613 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
9614 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
9615 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
9616 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
9618 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
9619 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
9620 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
9621 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9622 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9623 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9624 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9625 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9626 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9627 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9628 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9629 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9631 # Function key set for the ASCII (wy-50 compatible) keyboard
9632 # This is the default 370.
9634 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9635 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9636 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9637 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9638 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9639 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9640 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9641 knp=\E[U, kpp=\E[V, use=wy370-nk,
9643 # Function key set for the VT-320 (and wy85) compatible keyboard
9645 wy370-105k|Wyse 370 with 105 key keyboard,
9646 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9647 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9648 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9649 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9650 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9651 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9652 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9653 use=wy370-nk, use=vt220+keypad,
9655 # Function key set for the PC compatible keyboard
9657 wy370-EPC|Wyse 370 with 102 key keyboard,
9658 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9659 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9660 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9661 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9662 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9664 # Wyse 370 with visual bell.
9665 wy370-vb|Wyse 370 with visible bell,
9668 # Wyse 370 in 132-column mode.
9669 wy370-w|Wyse 370 in 132-column mode,
9671 rs2=\E[35h\E[?3h$<70>, use=wy370,
9673 # Wyse 370 in 132-column mode with visual bell.
9674 wy370-wvb|Wyse 370 with visible bell 132-columns,
9675 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9676 wy370-rv|Wyse 370 reverse video,
9677 rs3=\E[32h\E[?5h, use=wy370,
9679 # Wyse 99gt Tektronix 4010/4014 emulator,
9681 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9684 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9685 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9687 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9689 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9690 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9692 # Wyse 160 Tektronix 4010/4014 emulator,
9694 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9695 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9696 home=^]8`g @\037, use=wy99gt-tek,
9698 # Wyse 370 Tektronix 4010/4014 emulator,
9700 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9703 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9704 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9706 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9708 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9709 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9710 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9712 # Vendor-supplied Wyse entries end here.
9715 #TITLE: TERMINFO ENTRY WY520
9717 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9718 # BBS with the addition of more function keys and special keys.
9720 # rs1 -> set personality
9721 # rs2 -> set number of columns
9722 # rs3 -> set number of lines
9723 # is1 -> select the proper font
9724 # is2 -> do the initialization
9725 # is3 -> If this string is empty then rs3 gets sent.
9727 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9728 # - The BS key is programmed to generate BS in smcup since
9729 # is2 doesn't seem to work.
9730 # - Remove and shift/Remove: delete a character
9731 # - Insert : enter insert mode
9732 # - Find : delete to end of file
9733 # - Select : clear a line
9734 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9736 # - Bottom status line (host writable line) is used.
9737 # - smkx,rmkx are removed because this would put the numeric
9738 # keypad in Dec application mode which doesn't seem to work
9739 # with SCO applications.
9741 wy520|wyse520|wyse 520,
9742 am, hs, km, mc5i, mir, xenl, xon,
9743 cols#80, it#8, lines#24, wsl#80,
9744 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9745 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9746 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9747 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9748 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9749 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9750 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9751 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9752 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9753 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9754 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9755 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9756 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9757 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9758 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9759 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9760 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9761 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9762 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9763 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9764 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9765 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9766 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9767 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9768 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9769 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9770 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9771 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9772 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9773 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9774 vpa=\E[%i%p1%dd, use=vt220+keypad,
9776 # Wyse 520 with 24 data lines and status (terminal status)
9777 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9779 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9782 # Wyse 520 with visual bell.
9783 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9784 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9786 # Wyse 520 in 132-column mode.
9787 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9789 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9790 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9792 # Wyse 520 in 132-column mode with visual bell.
9793 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9794 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9797 # Wyse 520 emulating a vt420 7 bit mode.
9798 # The DEL key is programmed to generate BS in is2.
9799 # With EPC keyboard.
9800 # - 'End' key will clear till end of line on EPC keyboard
9801 # - Shift/End : ignored.
9802 # - Insert : enter insert mode.
9803 # - Delete : delete a character (have to change interrupt character
9804 # to CTRL-C: stty intr '^c') for it to work since the
9805 # Delete key sends 7FH.
9806 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9807 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9808 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9811 # Wyse 520 with 24 data lines and status (terminal status)
9812 # with EPC keyboard.
9813 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9815 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9818 # Wyse 520 with visual bell.
9819 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9820 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9822 # Wyse 520 in 132-column mode.
9823 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9825 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9826 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9828 # Wyse 520 in 132-column mode with visual bell.
9829 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9830 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9832 # Wyse 520 in 80-column, 36 lines
9833 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9836 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9839 # Wyse 520 in 80-column, 48 lines
9840 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9843 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9846 # Wyse 520 in 132-column, 36 lines
9847 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9850 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9853 # Wyse 520 in 132-column, 48 lines
9854 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9857 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9861 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9862 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9865 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9868 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9869 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9872 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9875 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9876 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9879 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9882 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9883 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9886 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9889 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9890 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9891 # file and we don't know what <hts> is -- esr)
9892 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9894 cols#80, it#8, lines#24,
9895 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9896 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9897 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9898 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9899 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9900 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9903 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9904 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9905 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9906 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9909 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9910 wy100q|Wyse 100 for Quotron,
9912 cols#80, lines#24, xmc#1,
9913 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9914 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9915 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9916 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9917 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9919 #### Kermit terminal emulations
9921 # Obsolete Kermit versions may be listed in the section describing obsolete
9922 # non-ANSI terminal emulators later in the file.
9925 # KERMIT standard all versions.
9926 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9927 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9928 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9929 kermit|standard kermit,
9932 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9933 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9934 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9935 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9936 kermit-am|standard kermit plus auto-margin,
9938 is2=K1 Standard Kermit plus Automatic Margins\n,
9941 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9942 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9944 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9945 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9948 clear=\EH\EJ, ed@, el@,
9949 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9951 # Cannot use line 25, now acts funny like ansi special scrolling region.
9952 # Initialization must escape from that region by cursor position to line 24.
9953 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9954 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9955 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9956 pckermit120|UCB IBMPC Kermit 1.20,
9958 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9960 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9961 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9962 # MS-DOS Kermit 2.27 for the IBMPC
9963 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9964 # Cannot use line 25, now acts funny like ansi special scrolling region.
9965 # Initialization must escape from that region by cursor position to line 24.
9966 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9967 # Reverse video for standout like H19.
9968 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9969 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9970 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9972 cols#80, it#8, lines#24,
9973 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9974 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9975 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9976 home=\EH, ht=^I, il1=\EL,
9977 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9978 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9979 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9980 # MS-DOS Kermit 2.27 with automatic margins
9981 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9982 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9984 cvvis=\EO\Eq\EG\EvK5,
9985 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9987 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9988 # Automatic margins now default. Use ansi <sgr> for highlights.
9989 # Define function keys.
9990 # (msk22714: removed obsolete ":kn#10:" -- esr)
9991 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9992 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9994 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9995 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9996 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9997 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9998 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9999 # This was designed for a VT320 emulator, but it is probably a good start
10000 # at support for the VT320 itself.
10001 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
10002 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
10003 vt320-k3|MS-Kermit 3.00's vt320 emulation,
10004 am, eslok, hs, km, mir, msgr, xenl,
10005 cols#80, it#8, lines#49, pb#9600, vt#3,
10006 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10007 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10008 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
10009 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10010 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10011 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10012 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10013 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
10014 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
10015 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10016 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10017 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
10018 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
10019 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10020 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
10021 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
10022 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
10023 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
10024 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
10025 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
10026 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10027 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
10028 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
10029 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
10030 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
10031 vt320-k311|dec vt320 series as defined by kermit 3.11,
10032 am, eslok, hs, mir, msgr, xenl, xon,
10033 cols#80, it#8, lines#24, vt#3,
10034 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10035 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
10036 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
10037 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10038 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10039 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10040 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
10041 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
10042 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
10043 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
10044 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
10045 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10046 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
10047 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
10048 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
10049 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
10050 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
10051 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
10052 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
10053 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
10055 ######## NON-ANSI TERMINAL EMULATIONS
10060 # These entries attempt to describe Avatar, a terminal emulation used with
10061 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
10062 # capabilities, but with cheaper (shorter) control sequences. Messy design,
10063 # excessively dependent on PC idiosyncracies, but apparently rather popular
10064 # in the BBS world.
10066 # No color support. Avatar doesn't fit either of the Tektronix or HP color
10067 # models that terminfo knows about. An Avatar color attribute is the
10068 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
10070 # I wrote these entries while looking at the Avatar spec. I don't have
10071 # the facilities to test them. Let me know if they work, or don't.
10073 # Avatar escapes not used by these entries (because maybe you're smarter
10074 # and more motivated than I am and can figure out how to wrap terminfo
10075 # around some of them, and because they are weird enough to be funny):
10077 # ^L -- clear window/reset current attribute to default
10078 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
10080 # bit: 6 5 4 3 2 1 0
10082 # +---+---+ | +---+---+
10084 # | | foreground color
10085 # | foreground intensity
10088 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
10089 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
10090 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
10091 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
10092 # (^V^L and ^V^M set the current attribute as a side-effect.)
10093 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
10094 # in the pattern, <c> the number of times the pattern
10095 # should be repeated. If either value is 0, no-op.
10096 # The pattern can contain Avatar console codes,
10097 # including other ^V ^Y patterns.
10099 # ^V^O -- clockwise mode on; turn print direction right each time you
10100 # hit a window edge (yes, really). Turned off by CR
10102 # ^V^Q%c -- query the driver
10103 # ^V^R -- driver reset
10104 # ^V^S -- Sound tone (PC-specific)
10105 # ^V^T -- change highlight at current cursor poition to %c
10106 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
10107 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
10110 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10111 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
10112 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
10113 # which is the only method that will actually work for multiple highlights.)
10115 # Update by TD - 2004: half of this was inconsistent. Found documentation
10116 # and repaired most of the damage. sgr0 is probably incorrect, but the
10117 # available documentation gives no clues for a workable string.
10118 avatar0|avatar terminal emulator level 0,
10120 cols#80, it#8, lines#25,
10121 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
10122 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
10123 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
10125 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
10126 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
10128 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10129 avatar0+|avatar terminal emulator level 0+,
10130 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
10131 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
10132 avatar|avatar1|avatar terminal emulator level 1,
10133 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
10134 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
10138 # RBComm is a lean and mean terminal emulator written by the Interrupt List
10139 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
10140 # '90s), especially in the BBS world, and still has some loyal users due to
10141 # its very small memory footprint and to a cute macro language.
10142 rbcomm|IBM PC with RBcomm and EMACS keybindings,
10143 am, bw, mir, msgr, xenl,
10144 cols#80, it#8, lines#25,
10145 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10146 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10147 cub1=^H, cud1=^C, cuf1=^B,
10148 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
10149 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
10150 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
10151 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
10152 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
10153 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
10154 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
10155 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
10156 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
10157 rbcomm-nam|IBM PC with RBcomm without autowrap,
10159 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10160 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
10161 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10162 rbcomm-w|IBM PC with RBcomm in 132 column mode,
10164 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
10165 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
10166 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
10168 ######## LCD DISPLAYS
10171 #### Matrix Orbital
10172 # from: Eric Z. Ayers (eric@ale.org)
10174 # Matrix Orbital 20x4 LCD display
10175 # Command Character is 0xFE (decimal 254, octal 376)
10177 # On this device, cursor addressability isn't possible. The LCD expects:
10178 # 0xfe G <col> <row>
10179 # for cup: %p1 == row and %p2 is column
10182 # cup=\376G%p2%c%p1%c
10183 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
10184 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
10186 # Alas, there is no cursor upline capability on this display.
10188 # These entries add some 'sanity stuff' to the clear function. That is, it
10189 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
10190 # and turns off the cursor blinking and stuff like that.
10192 # NOTE: calling 'beep' turns on the backlight (bell)
10193 # NOTE: calling 'flash' turns it on and back off (visual bell)
10195 MtxOrb|Generic Matrix Orbital LCD display,
10196 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
10197 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
10198 flash=\376B\001$<200>\376F, home=\376H,
10199 MtxOrb204|20x4 Matrix Orbital LCD display,
10200 cols#20, lines#4, use=MtxOrb,
10201 MtxOrb162|16x2 Matrix Orbital LCD display,
10202 cols#16, lines#2, use=MtxOrb,
10205 ######## OLDER TERMINAL TYPES
10207 # This section is devoted to older commercial terminal brands that are now
10208 # discontinued, but known to be still in use or represented by emulations.
10211 #### AT&T (att, tty)
10213 # This section also includes Teletype-branded VDTs.
10215 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
10216 # Boundless Technologies); for details, see the header comment on the ADDS
10219 # These are AT&T's official terminfo entries. All-caps aliases have been
10222 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
10223 am, eo, mir, msgr, xon,
10224 cols#80, it#8, lines#24,
10225 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
10226 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10227 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10228 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10229 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10230 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10231 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10232 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
10233 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
10234 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
10235 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
10236 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10237 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
10239 att2350|AT&T 2350 Video Information Terminal 80 column mode,
10240 mc0@, mc4@, mc5@, use=att2300,
10242 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
10243 # Seems upward compatible with vt100, plus ins/del line/char.
10244 # On sgr, the protection parameter is ignored.
10245 # No check is made to make sure that only 3 parameters are output.
10246 # standout= reverse + half-intensity = 3 | 5.
10247 # bold= reverse + underline = 2 | 3.
10248 # note that half-bright blinking doesn't look different from normal blinking.
10249 # NOTE:you must program the function keys first, label second!
10250 # (att4410: a BSD entry has been seen with the following capabilities:
10251 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
10252 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
10253 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
10254 am, hs, mir, msgr, xon,
10255 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10256 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10257 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
10258 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
10259 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
10260 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
10261 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
10262 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
10263 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10264 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
10265 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
10266 ll=\E[24H, nel=^M^J,
10267 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
10268 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10269 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10271 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10272 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10273 tsl=\E7\E[25;%p1%{1}%+%dH,
10275 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
10277 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
10279 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
10281 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
10284 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
10286 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
10288 # 5410 in terms of a vt100
10289 # (v5410: added <rmam>/<smam> based on init string -- esr)
10290 v5410|att5410 in terms of a vt100,
10291 am, mir, msgr, xon,
10292 cols#80, it#8, lines#24, vt#3,
10293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10294 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10295 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10296 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
10297 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
10298 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
10299 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
10300 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10301 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
10302 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
10303 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10305 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
10306 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10307 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10311 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
10312 # even! the 5420 has three modes: scroll, window or page mode
10313 # this terminfo should work in scroll or window mode, but doesn't
10314 # take advantage of any of the differences between them.
10316 # Has memory below (2 lines!)
10317 # 3 pages of memory (plus some spare)
10318 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
10319 # <hpa>, <hts> would work for these, but these work in both scroll and window
10320 # mode... Unset insert character so insert mode works
10321 # <is1> sets 80 column mode,
10322 # <is2> escape sequence:
10323 # 1) turn off all fonts
10324 # 2) function keys off, keyboard lock off, control display off,
10325 # insert mode off, erasure mode off,
10326 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
10327 # 4) reset origin mode
10328 # 5) set line wraparound
10329 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
10331 # 8) program ENTER to transmit ^J,
10332 # We use \212 to program the ^J because a bare ^J will get translated by
10333 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
10335 # <is3> set screen color to black,
10336 # No representation in terminfo for the delete word key: kdw1=\Ed
10337 # Key capabilities assume the power-up send sequence...
10338 # This <rmcup> is not strictly necessary, but it helps maximize
10339 # memory usefulness: <rmcup=\Ez>,
10340 # Alternate sgr0: <sgr0=\E[m\EW^O>,
10341 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
10342 # smkx programs the SYS PF keys to send a set sequence.
10343 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
10344 # This string causes them to send the strings <kf1>-<kf8>
10345 # when pressed in SYS PF mode.
10346 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
10347 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
10348 OTbs, db, mir, xon,
10349 lh#2, lm#78, lw#8, nlab#8, wsl#55,
10350 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
10351 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
10352 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
10353 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
10354 flash=\E[?5h$<200>\E[?5l, home=\E[x,
10355 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
10356 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
10357 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
10358 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
10359 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
10360 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10361 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10362 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10363 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
10364 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
10365 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
10366 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
10367 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
10368 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
10369 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10370 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
10371 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
10372 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10375 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
10376 cols#132, lm#54, wsl#97,
10377 is1=\E[?3h$<100>, use=att4415,
10379 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
10380 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
10382 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
10383 cols#132, lm#54, wsl#97,
10384 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
10387 # Note that this mode permits programming USER PF KEYS and labels
10388 # However, when you program user pf labels you have to reselect
10389 # user pf keys to make them appear!
10390 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
10391 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
10392 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
10393 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
10395 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
10396 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10399 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
10400 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10403 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
10404 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10407 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
10408 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
10411 att5420_2|AT&T 5420 model 2 80 cols,
10412 am, db, hs, mir, msgr, xon,
10413 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10414 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10415 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
10416 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10417 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
10418 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
10419 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10420 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
10421 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10422 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
10423 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10424 indn=\E[%p1%dE, invis=\E[8m,
10425 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10426 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
10427 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
10428 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
10429 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
10430 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
10431 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
10432 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
10433 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
10434 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
10435 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
10436 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
10437 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
10439 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10440 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
10441 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10442 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
10443 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
10445 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
10448 att4418|att5418|AT&T 5418 80 cols,
10451 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10452 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
10453 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10454 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10455 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
10456 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
10457 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
10458 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
10459 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
10460 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
10461 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
10462 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
10463 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
10464 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
10465 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
10466 att4418-w|att5418-w|AT&T 5418 132 cols,
10468 is1=\E[?3h, use=att5418,
10470 att4420|tty4420|teletype 4420,
10471 OTbs, da, db, eo, msgr, ul, xon,
10472 cols#80, lines#24, lm#72,
10473 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
10474 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
10475 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
10476 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
10477 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
10478 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
10479 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
10480 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
10482 # The following is a terminfo entry for the Teletype 4424
10483 # asynchronous keyboard-display terminal. It supports
10484 # the vi editor. The terminal must be set up as follows,
10486 # HIGHLIGHT DEFINITION 3-TONE
10487 # DISPLAY FUNCTION GROUP III
10489 # The second entry below provides limited (a la adm3a)
10490 # operation under GROUP II.
10492 # This must be used with DISPLAY FUNCTION GROUP I or III
10493 # and HIGHLIGHT DEFINITION 3-TONE
10494 # The terminal has either bold or blink, depending on options
10496 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
10497 att4424|tty4424|teletype 4424,
10500 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10501 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
10502 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10503 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
10504 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
10505 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
10506 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10507 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
10508 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10509 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10510 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
10512 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
10513 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
10516 att4424-1|tty4424-1|teletype 4424 in display function group I,
10517 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
10520 # This entry is not one of AT&T's official ones, it was translated from the
10521 # 4.4BSD termcap file. The highlight strings are different from att4424.
10522 # I have no idea why this is -- older firmware version, maybe?
10523 # The following two lines are the comment originally attached to the entry:
10524 # This entry appears to avoid the top line - I have no idea why.
10525 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
10526 att4424m|tty4424m|teletype 4424M,
10528 cols#80, it#8, lines#23,
10529 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10530 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
10531 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
10532 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10533 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
10534 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
10535 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10537 # The Teletype 5425 is really version 2 of the Teletype 5420. It
10538 # is quite similar, except for some minor differences. No page
10539 # mode, for example, so all of the <cup> sequences used above have
10540 # to change back to what's being used for the 5410. Many of the
10541 # option settings have changed their numbering as well.
10543 # This has been tested on a preliminary model.
10545 # (att5425: added <rmam>/<smam> based on the init string -- esr)
10546 att5425|tty5425|att4425|AT&T 4425/5425,
10547 am, da, db, hs, mir, msgr, xenl, xon,
10548 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
10549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10550 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10551 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
10552 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10553 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10554 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10555 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10556 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
10557 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
10558 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
10559 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10560 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
10561 invis=\E[8m, is1=\E<\E[?3l$<100>,
10562 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
10563 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
10564 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10565 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
10566 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
10567 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
10568 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
10570 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10571 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
10572 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
10573 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
10574 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
10575 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
10576 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10577 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
10578 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
10579 vpa=\E[%p1%{1}%+%dd,
10581 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
10582 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
10584 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
10585 cols#132, lm#54, wsl#97,
10586 is1=\E[?3h$<100>, use=tty5425,
10588 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
10589 # I also added <rmam>/<smam> -- esr)
10590 att4426|tty4426|teletype 4426S,
10592 cols#80, lines#24, lm#48,
10593 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10594 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
10595 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
10596 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10597 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
10598 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
10599 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
10600 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
10601 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
10602 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10603 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
10604 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
10605 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
10606 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
10607 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
10608 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
10611 # Terminfo entry for the AT&T 510 A Personal Terminal
10612 # Function keys 9 - 16 are available only after the
10613 # screen labeled (soft keys/action blocks) are labeled. Function key
10614 # 9 corresponds to the leftmost touch target on the screen,
10615 # function key 16 corresponds to the rightmost.
10617 # This entry is based on one done by Ernie Rice at Summit, NJ and
10618 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
10619 att510a|bct510a|AT&T 510A Personal Terminal,
10620 am, mir, msgr, xenl, xon,
10621 cols#80, lh#2, lines#24, lw#7, nlab#8,
10622 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10623 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10624 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10625 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10626 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10627 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10628 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10629 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10630 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10631 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10632 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10633 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10634 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10635 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10636 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10637 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10638 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10639 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10640 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10641 smul=\E[4m, tbc=\E[3g,
10643 # Terminfo entry for the AT&T 510 D Personal Terminal
10644 # Function keys 9 through 16 are accessed by bringing up the
10646 # Function key 9 corresponds to the leftmost touch target on the screen,
10647 # function key 16 corresponds to the rightmost.
10649 # There are problems with soft key labeling. These are due to
10650 # strangenesses in the native terminal that are impossible to
10651 # describe in a terminfo.
10652 att510d|bct510d|AT&T 510D Personal Terminal,
10653 am, da, db, mir, msgr, xenl, xon,
10654 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10655 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10656 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10657 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10658 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
10659 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10660 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10661 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10662 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10663 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10664 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10665 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10666 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10667 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10668 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10669 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10670 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10671 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10672 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10673 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10674 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10675 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10676 rs2=\E[5;0|, sc=\E7,
10677 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10678 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10679 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10680 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10682 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10683 att500|att513|AT&T 513 using page mode,
10684 am, chts, mir, msgr, xenl, xon,
10685 cols#80, lh#2, lines#24, lw#8, nlab#8,
10686 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10687 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10688 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10689 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10690 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10691 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10692 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10693 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10694 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10695 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10696 indn=\E[%p1%dE, invis=\E[8m,
10697 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10698 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10699 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10700 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10701 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10702 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10703 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10704 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10705 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10706 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10707 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10708 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10709 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10710 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10711 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10712 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10713 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10714 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10716 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10717 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10718 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10719 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10720 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10721 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10722 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10724 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10725 rs2=\E[5;0|, sc=\E7,
10726 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10727 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10728 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10729 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10732 # printer must be set to EMUL ANSI to accept ESC codes
10733 # <cuu1> stops at top margin
10734 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10735 # and alt font ascii,wrap on,tabs cleared
10736 # <is2> disables newline on LF,Emphasized off
10737 # The <u0> capability sets form length
10738 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10740 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10741 orhi#100, orl#12, orvi#72,
10742 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10744 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10745 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10746 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10747 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10749 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10750 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10751 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10752 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10754 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10755 # The following SET-UP modes are assumed for normal operation:
10756 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10757 # Other SET-UP modes may be set for operator convenience or communication
10758 # requirements. This termcap description is for the Resident Terminal Mode.
10759 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10760 # The BRL entry also said: UNSAFE :ll=\E[70H:
10761 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10763 cols#88, it#8, lines#70, vt#3,
10764 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10765 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10766 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10767 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10768 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10769 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10770 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10773 # 5620 terminfo (2.0 or later ROMS with char attributes)
10774 # The following SET-UP modes are assumed for normal operation:
10775 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10776 # Other SET-UP modes may be set for operator convenience or communication
10777 # requirements. This termcap description is for Resident Terminal Mode. No
10778 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10779 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10780 # Be aware that older versions of the dmd have a firmware bug that affects
10781 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10782 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10783 # also has <ll>=\E[70H commented out and marked unsafe.
10784 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10785 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10786 OTbs, am, msgr, npc, xon,
10787 cols#88, it#8, lines#70,
10788 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10789 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10790 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10791 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10792 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10793 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10794 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10795 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10796 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10797 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10798 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10799 lines#24, use=att5620,
10800 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10801 lines#34, use=att5620,
10802 # 5620 layer running the "S" system's downloaded graphics handler:
10803 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10805 cols#80, it#8, lines#72,
10806 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10807 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10808 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10809 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10812 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10814 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10815 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10816 att605|AT&T 605 80 column 102key keyboard,
10818 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10819 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10820 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10821 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10822 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10823 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10824 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10825 il1=\E[L, ind=^J, invis=\E[8m,
10826 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10827 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10828 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10829 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10830 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10831 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10832 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10833 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10834 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10835 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10836 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10837 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10838 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10839 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10840 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10841 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10842 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10843 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10844 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10845 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10846 tsl=\E7\E[25;%i%p1%dx,
10847 att605-pc|ATT 605 in pc term mode,
10848 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10849 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10850 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10851 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10852 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10853 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10854 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10855 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10856 xonc=e, use=att605,
10857 att605-w|AT&T 605-w 132 column 102 key keyboard,
10859 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10861 # (att610: I added <rmam>/<smam> based on the init string. I also
10862 # added <indn> and <rin> because the BSD file says the att615s have them,
10863 # and the 615 is like a 610 with a big keyboard, and most of their other
10864 # smart terminals support the same sequence -- esr)
10865 att610|AT&T 610; 80 column; 98key keyboard,
10866 am, eslok, hs, mir, msgr, xenl, xon,
10867 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10868 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10869 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10870 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10871 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10872 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10873 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10874 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10875 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10876 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10877 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10878 indn=\E[%p1%dS, invis=\E[8m,
10879 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10880 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10881 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10882 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10883 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10884 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10885 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10887 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10888 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10889 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10890 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10891 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10892 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10893 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10894 att610-w|AT&T 610; 132 column; 98key keyboard,
10896 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10899 att610-103k|AT&T 610; 80 column; 103key keyboard,
10900 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10901 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10902 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10903 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10904 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10905 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10906 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10907 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10908 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10909 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10910 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10911 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10912 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10913 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10915 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10917 att615|AT&T 615; 80 column; 98key keyboard,
10918 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10919 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10920 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10921 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10922 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10923 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10924 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10925 att615-w|AT&T 615; 132 column; 98key keyboard,
10926 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10927 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10928 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10929 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10930 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10931 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10932 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10933 att615-103k|AT&T 615; 80 column; 103key keyboard,
10934 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10935 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10936 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10937 # (att620: I added <rmam>/<smam> based on the init string and
10938 # <rin>/<indn> from a BSD termcap -- esr)
10939 att620|AT&T 620; 80 column; 98key keyboard,
10940 am, eslok, hs, mir, msgr, xenl, xon,
10941 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10942 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10943 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10944 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10945 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10946 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10947 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10948 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10949 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10950 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10951 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10952 indn=\E[%p1%dS, invis=\E[8m,
10953 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10954 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10955 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10956 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10957 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10958 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10959 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10960 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10961 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10962 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10963 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10964 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10965 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10966 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10967 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10968 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10969 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10970 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10971 rs2=\Ec\E[?3l, sc=\E7,
10972 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
10973 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10974 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10975 tsl=\E7\E[25;%i%p1%dx,
10976 att620-w|AT&T 620; 132 column; 98key keyboard,
10978 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10980 att620-103k|AT&T 620; 80 column; 103key keyboard,
10981 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10982 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10983 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10984 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10985 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10986 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10987 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10988 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10989 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10990 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10991 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10992 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10993 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10994 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10995 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10996 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10998 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
11000 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11003 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
11004 # The following SETUP modes are assumed for normal operation:
11005 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
11006 # Font_Size=Large Non-Layers_Window_Cols=80
11007 # Non-Layers_Window_Rows=60
11008 # Other SETUP modes may be set for operator convenience or communication
11009 # requirements. Some capabilities assume a printer attached to the Aux EIA
11010 # port. This termcap description is for the Fixed Non-Layers Window. No
11011 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11012 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
11013 att630|AT&T 630 windowing terminal,
11014 OTbs, am, da, db, mir, msgr, npc, xon,
11015 cols#80, it#8, lines#60, lm#0,
11016 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
11017 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11018 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11019 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11020 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11021 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11022 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
11023 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11024 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
11025 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
11026 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
11027 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
11028 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
11029 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
11030 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
11031 rmul=\E[m, rs2=\Ec, sc=\E7,
11032 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
11033 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11034 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
11035 lines#24, use=att630,
11037 # This is the att700 entry for 700 native emulation of the AT&T 700
11038 # terminal. Comments are relative to changes from the 605V2 entry and
11039 # att730 on which the entry is based. Comments show the terminfo
11040 # capability name, termcap name, and description.
11042 # Here is what's going onm in the init string:
11043 # ESC [ 50;4| set 700 native mode (really is 605)
11044 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
11045 # ESC [ 53;0| set GenFlow to Xon/Xoff
11046 # ESC [ 8 ;0| set CR on NL
11047 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
11048 # ESC [ ? 4 l jump scroll
11049 # ESC [ ? 5 l/h video: normal (l); reverse (h)
11050 # ESC [ ?13 l Labels on
11051 # ESC [ ?15 l parity check = no
11052 # ESC [ 13 l monitor mode off
11053 # ESC [ 20 l LF on NL (not CRLF on NL)
11054 # ESC [ ? 7 h autowrap on
11055 # ESC [ 12 h local echo off
11056 # ESC ( B GO = ASCII
11057 # ESC ) 0 G1 = Special Char & Line Drawing
11058 # ESC [ ? 31 l Set 7 bit controls
11060 # Note: Most terminals, especially the 600 family use Reverse Video for
11061 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
11062 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
11063 # standout mode with \E[m (all normal attributes). The 730 entry simply
11064 # exits reverse video which would leave other current attributes intact. It
11065 # was assumed the 730 entry to be more correct so rmso has changed. The
11066 # 605V2 has no sequences to turn individual attributes off, thus its setting
11067 # and the rmso/smso settings from the 730.
11069 # Note: For the same reason as above in rmso I changed exit under-score mode
11070 # to specifically turn off underscore, rather than return to all normal
11073 # Note: The following pkey_xmit is taken from the 605V2 which contained the
11074 # capability as pfxl. It was changed here to pfx since pfxl
11075 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
11076 # allows strings to be parameters and label values must be programmed as
11077 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
11078 # and strings to be parameters. The 605V2 pfx entry should be examined later
11079 # in this regard. For reference the 730 pfxl entry is shown here for comparison
11081 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
11082 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
11085 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11088 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11090 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
11094 # modular 10 pin Connector
11095 # Left side Right side
11096 # Pin 1 2 3 4 5 6 7 8 9 10
11098 # Key (notch) at bottom
11110 # The manual is 189 pages and is loaded with details about the escape codes,
11111 # etc..... Available from AT&T CIC 800-432-6600...
11112 # ask for Document number 999-300-660..
11114 att700|AT&T 700 24x80 column display w/102key keyboard,
11115 am, eslok, hs, mir, msgr, xenl, xon,
11116 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11117 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11118 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11119 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11120 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11121 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11122 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11123 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11124 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11125 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
11126 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11127 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
11128 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
11129 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
11130 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11131 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
11132 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
11133 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
11134 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
11135 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
11136 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
11137 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
11138 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11139 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
11140 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11141 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
11142 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11143 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
11144 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11145 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11146 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
11147 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
11148 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11149 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
11150 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
11151 tsl=\E7\E[99;%i%p1%dx,
11153 # This entry was modified 3/13/90 by JWE.
11154 # fixes include additions of <enacs>, correcting <rep>, and modification
11155 # of <kHOM>. (See comments below)
11156 # att730 has status line of 80 chars
11157 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
11158 # the <kf25> and up keys are used for shifted system Fkeys
11159 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
11160 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
11161 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
11162 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
11163 # 102, 102+1, or 122 key keyboards
11165 # (att730: I added <rmam>/<smam> based on the init string -- esr)
11166 att730|AT&T 730 windowing terminal,
11167 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
11168 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
11169 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11170 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11171 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11172 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11173 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11174 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11175 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11176 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11177 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11178 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
11179 ind=\ED, invis=\E[8m,
11180 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
11181 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11182 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11183 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11184 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
11185 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
11186 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
11187 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
11188 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
11189 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
11190 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
11191 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
11192 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11193 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
11194 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11195 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
11196 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
11197 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
11198 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
11199 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
11200 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
11201 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11202 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11203 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
11204 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
11205 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
11206 lines#41, use=att730,
11207 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
11208 lines#24, use=att730,
11209 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
11210 flash=\E[?5l$<200>\E[?5h,
11211 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
11213 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
11214 lines#41, use=att730r,
11215 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
11216 lines#24, use=att730r,
11218 # The following represents the screen layout along with the associated
11219 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
11220 # not appear on the screen but are shown to reference the bezel buttons.
11221 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
11222 # position relative to the screen.
11226 # +----------------------------------------------------------------+
11228 # XXXX | kf0 kf24 | XXXX
11231 # XXXX | kf1 kf23 | XXXX
11234 # XXXX | kf2 kf22 | XXXX
11237 # XXXX | kf3 kf21 | XXXX
11240 # XXXX | kf4 kf20 | XXXX
11243 # XXXX | kf5 kf19 | XXXX
11246 # XXXX | kf6 kf18 | XXXX
11252 # +----------------------------------------------------------------+
11254 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
11256 # Note: XXXX represents the screen buttons
11262 # The character string sent by key 'kf26' may be user programmable
11263 # to send either \E[16s, or \E[26s.
11264 # The character string sent by key 'krfr' may be user programmable
11265 # to send either \E[17s, or \E[27s.
11267 # Depression of the "CMD" key sends \E! (kcmd)
11268 # Depression of the "MAIL" key sends \E[26s (kf26)
11269 # "REDRAW" same as "REFRESH" (krfr)
11271 # "kf" functions adds carriage return to output string if terminal is in
11274 # The following are functions not covered in the table above:
11276 # Set keyboard character (SKC): \EPn1;Pn2w
11277 # Pn1= 0 Back Space key
11279 # Pn2= Program char (hex)
11281 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
11282 # Pn1= Window number (1-39)
11283 # Pn2-Pn5= Y;X;Y;X coordinates
11285 # Screen Selection (SSL): \E[Pnu
11286 # Pn= Window number
11288 # Set Terminal Modes (SM): \E[Pnh
11289 # Pn= 3 Graphics mode
11290 # Pn= > Cursor blink
11291 # Pn= < Enter new line mode
11292 # Pn= = Enter reverse insert/replace mode
11293 # Pn= ? Enter no scroll mode
11295 # Reset Terminal Mode (RM): \E[Pnl
11296 # Pn= 3 Exit graphics mode
11297 # Pn= > Exit cursor blink
11298 # Pn= < Exit new line mode
11299 # Pn= = Exit reverse insert/replace mode
11300 # Pn= ? Exit no scroll mode
11302 # Screen Status Report (SSR): \E[Pnp
11303 # Pn= 0 Request current window number
11304 # Pn= 1 Request current window dimensions
11306 # Device Status Report (DSR): \E[6n Request cursor position
11308 # Call Status Report (CSR): \E[Pnv
11309 # Pn= 0 Call failed
11310 # Pn= 1 Call successful
11312 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
11313 # Pn1= Button number to be loaded
11314 # Pn2= Character count of "string"
11315 # Pn3= Key mode being loaded:
11319 # String= Text string (15 chars max)
11321 # Screen Number Report (SNR): \E[Pnp
11322 # Pn= Screen number
11324 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
11325 # Pn1= Number of rows available in window
11326 # Pn2= Number of columns available in window
11328 # Cursor Position Report (CPR): \E[Pn1;Pn2R
11329 # Pn1= "Y" Position of cursor
11330 # Pn2= "X" Position of cursor
11332 # Request Answer Back (RAB): \E[c
11334 # Answer Back Response (ABR): \E[?;*;30;VSV
11335 # *= 0 No printer available
11336 # *= 2 Printer available
11337 # V= Software version number
11338 # SV= Software sub version number
11339 # (printer-available field not documented in v1)
11341 # Screen Alignment Aid: \En
11343 # Bell (lower pitch): \E[x
11345 # Dial Phone Number: \EPdstring\
11346 # string= Phone number to be dialed
11348 # Set Phone Labels: \EPpstring\
11349 # string= Label for phone buttons
11351 # Set Clock: \EPchour;minute;second\
11353 # Position Clock: \EPsY;X\
11354 # Y= "Y" coordinate
11355 # X= "X" coordinate
11357 # Delete Clock: \Epr\
11359 # Programming The Function Buttons: \EPfPn;string\
11360 # Pn= Button number (00-06, 18-24)
11361 # (kf00-kf06, kf18-kf24)
11362 # string= Text to sent on button depression
11364 # The following in version 2 only:
11366 # Request For Local Directory Data: \EPp12;\
11368 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
11370 # Request for Local Directory Data in print format: \EPp13;\
11372 # Enable 'Prt on Line' mode: \022 (DC2)
11374 # Disable 'Prt on Line' mode: \024 (DC4)
11378 # The following Terminfo entry describes functions which are supported by
11379 # the AT&T 5430/pt505 terminal software version 2 and later.
11380 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
11382 cols#80, it#8, lines#24,
11383 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11384 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
11385 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
11386 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11387 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11388 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11389 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
11390 il=\E[%p1%dL, il1=\E[L, ind=^J,
11391 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
11392 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11393 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
11394 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
11395 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
11396 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
11397 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11398 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
11399 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
11400 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
11402 # The following Terminfo entry describes functions which are supported by
11403 # the AT&T 5430/pt505 terminal software version 1.
11404 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
11406 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
11407 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
11408 lines#22, use=att505,
11410 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
11411 # This cut mark helps make life less painful for people running ncurses tic
11412 # on machines with relatively little RAM. The file can be broken in half here
11413 # cleanly and compiled in sections -- no `use' references cross this cut
11417 #### Ampex (Dialogue)
11419 # Yes, these are the same people who are better-known for making audio- and
11420 # videotape. I'm told they are located in Redwood City, CA.
11423 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
11424 # (ampex80: some capabilities merged in from SCO's entry -- esr)
11425 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
11427 cols#80, it#8, lines#24,
11428 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
11429 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11430 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
11431 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
11432 smso=\Ej, smul=\El, tbc=\E3,
11433 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
11434 ampex175|ampex d175,
11437 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11438 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11439 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
11440 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
11441 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
11442 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
11443 # No backspace key in the main QWERTY cluster. Fortunately, it has a
11444 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
11445 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
11446 # mode), this key can be used as the erase key; I find I like this. Because
11447 # some people and some systems may not, there is another termcap ("ampex175")
11448 # that suppresses this little eccentricity by omitting the relevant capability.
11449 ampex175-b|ampex d175 using left arrow for erase,
11450 kbs=^_, use=ampex175,
11451 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
11452 # (ampex210: removed obsolete ":kn#10:" -- esr)
11453 ampex210|a210|ampex a210,
11454 OTbs, am, hs, xenl,
11455 cols#80, it#8, lines#24, xmc#1,
11456 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
11457 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11458 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
11459 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
11460 if=/usr/share/tabset/std, il1=\EE, invis@,
11461 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
11462 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
11463 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
11464 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
11465 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
11466 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
11467 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
11468 # and moved the padding to be *after* the caps -- esr)
11469 ampex219|ampex-219|amp219|Ampex with Automargins,
11471 cols#80, it#8, lines#24,
11472 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
11473 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
11474 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
11475 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
11476 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
11477 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
11478 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11479 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
11480 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
11481 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
11482 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
11483 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
11484 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
11485 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
11486 cols#132, lines#24,
11487 bel=^G, cr=^M, cud1=^J, ind=^J,
11488 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
11489 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
11490 ampex232|ampex-232|Ampex Model 232,
11492 cols#80, lines#24, xmc#1,
11493 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
11494 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11495 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
11496 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
11497 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
11498 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
11499 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
11500 kf9=^AI\r, khome=^^, use=adm+sgr,
11501 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
11502 ampex232w|Ampex Model 232 / 132 columns,
11503 cols#132, lines#24,
11504 is2=\E\034Eg\El, use=ampex232,
11506 #### Ann Arbor (aa)
11508 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
11509 # numbers of function keys. At least some used monitors in portrait mode,
11510 # allowing up to 76-character screen heights! They were reachable at:
11512 # Ann Arbor Terminals
11513 # 6175 Jackson Road
11514 # Ann Arbor, MI 48103
11517 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
11518 # can't be found on the Web; I fear they're long dead. R.I.P.
11522 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
11523 # Highly modified 6/22 by Mike O'Brien.
11524 # split out into several for the various screen sizes by dave-yost@rand
11525 # Modifications made 3/82 by Mark Horton
11526 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
11527 # status line moved to top of screen, <flash> removed 5/82
11528 # Some unknown person at SCO then hacked the init strings to make them more
11531 # assumes the following setup:
11532 # A menu: 0000 1010 0001 0000
11533 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11534 # C menu: 56 66 0 0 9600 0110 1100
11535 # D menu: 0110 1001 1 0
11537 # Briefly, the settings are for the following modes:
11538 # (values are for bit set/clear with * indicating our preference
11539 # and the value used to test these termcaps)
11540 # Note that many of these settings are irrelevent to the terminfo
11541 # and are just set to the default mode of the terminal as shipped
11544 # A menu: 0000 1010 0001 0000
11545 # Block/underline cursor*
11546 # blinking/nonblinking cursor*
11547 # key click/no key click*
11548 # bell/no bell at column 72*
11550 # key pad is cursor control*/key pad is numeric
11551 # return and line feed/return for <cr> key *
11552 # repeat after .5 sec*/no repeat
11553 # repeat at 25/15 chars per sec. *
11555 # hold data until pause pressed/process data unless pause pressed*
11556 # slow scroll/no slow scroll*
11557 # Hold in area/don't hold in area*
11558 # functions keys have default*/function keys disabled on powerup
11560 # show/don't show position of cursor during page transmit*
11565 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
11566 # Baud rate (9600*)
11568 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
11569 # 1 stop bit*/2 stop bits
11570 # parity error detection off*/on
11572 # keyboard local/on line*
11573 # half/full duplex*
11574 # disable/do not disable keyboard after data transmission*
11576 # transmit entire page/stop transmission at cursor*
11577 # transfer/do not transfer protected characters*
11578 # transmit all characters/transmit only selected characters*
11579 # transmit all selected areas/transmit only 1 selected area*
11581 # transmit/do not transmit line separators to host*
11582 # transmit/do not transmit page tab stops tabs to host*
11583 # transmit/do not transmit column tab stop tabs to host*
11584 # transmit/do not transmit graphics control (underline,inverse..)*
11586 # enable*/disable auto XON/XOFF control
11587 # require/do not require receipt of a DC1 from host after each LF*
11588 # pause key acts as a meta key/pause key is pause*
11596 # XON character (17*)
11597 # XOFF character (19*)
11599 # C menu: 56 66 0 0 9600 0110 1100
11600 # number of lines to print data on (printer) (56*)
11602 # number of lines on a sheet of paper (printer) (66*)
11604 # left margin (printer) (0*)
11606 # number of pad chars on new line to printer (0*)
11608 # printer baud rate (9600*)
11610 # printer parity: 00=odd,01=even*,10=space,11=mark
11611 # printer stop bits: 2*/1
11612 # print/do not print guarded areas*
11614 # new line is: 01=LF,10=CR,11=CRLF*
11618 # D menu: 0110 1001 1 0
11619 # LF is newline/LF is down one line, same column*
11620 # wrap to preceding line if move left from col 1*/don't wrap
11621 # wrap to next line if move right from col 80*/don't wrap
11622 # backspace is/is not destructive*
11624 # display*/ignore DEL character
11625 # display will not/will scroll*
11626 # page/column tab stops*
11627 # erase everything*/erase unprotected only
11629 # editing extent: 0=display,1=line*,2=field,3=area
11634 annarbor4080|aa4080|ann arbor 4080,
11637 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11638 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11639 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11640 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11642 # Strange Ann Arbor terminal from BRL
11643 aas1901|Ann Arbor K4080 w/S1901 mod,
11646 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11647 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11650 # If you're using the GNU termcap library, add
11651 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11652 # to these capabilities. This is the nonstandard GNU termcap scrolling
11653 # capability, arguments are:
11654 # 1. Total number of lines on the screen.
11655 # 2. Number of lines above desired scroll region.
11656 # 3. Number of lines below (outside of) desired scroll region.
11657 # 4. Total number of lines on the screen, the same as the first parameter.
11658 # The generic Ann Arbor entry is the only one that uses this.
11659 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11660 OTbs, am, km, mc5i, mir, xon,
11662 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11663 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11664 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11665 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11666 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11667 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11668 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11669 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11670 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11671 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11672 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11673 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11674 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11675 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11676 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11677 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11678 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11679 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11680 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11681 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11682 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11684 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11685 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11686 vpa=\E[%p1%{1}%+%dd,
11688 aaa+rv|ann arbor ambassador in reverse video,
11689 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11690 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11691 rs1=\E[H\E[7m\E[J$<156>,
11692 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
11693 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11694 # Ambassador with the DEC option, for partial vt100 compatibility.
11695 aaa+dec|ann arbor ambassador in dec vt100 mode,
11696 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11697 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11698 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11700 aaa-18|ann arbor ambassador/18 lines,
11702 is2=\E7\E[60;0;0;18p\E8,
11703 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11705 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11706 use=aaa+rv, use=aaa-18,
11707 aaa-20|ann arbor ambassador/20 lines,
11709 is2=\E7\E[60;0;0;20p\E8,
11710 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11712 aaa-22|ann arbor ambassador/22 lines,
11714 is2=\E7\E[60;0;0;22p\E8,
11715 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11717 aaa-24|ann arbor ambassador/24 lines,
11719 is2=\E7\E[60;0;0;24p\E8,
11720 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11722 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11723 use=aaa+rv, use=aaa-24,
11724 aaa-26|ann arbor ambassador/26 lines,
11726 is2=\E7\E[60;0;0;26p\E8,
11727 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11728 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11729 aaa-28|ann arbor ambassador/28 lines,
11731 is2=\E7\E[60;0;0;28p\E8,
11732 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11733 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11734 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11737 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11738 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11739 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11740 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11741 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11742 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11743 use=aaa+rv, use=aaa-30-s,
11744 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11745 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11746 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11747 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11748 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11749 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11750 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11752 is2=\E7\E[60;0;0;30p\E8,
11753 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11754 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11755 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11756 use=aaa+rv, use=aaa-30,
11757 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11758 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11760 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11761 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11762 use=aaa+rv, use=aaa-30,
11763 aaa-36|ann arbor ambassador/36 lines,
11765 is2=\E7\E[60;0;0;36p\E8,
11766 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11767 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11768 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11769 use=aaa+rv, use=aaa-36,
11770 aaa-40|ann arbor ambassador/40 lines,
11772 is2=\E7\E[60;0;0;40p\E8,
11773 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11774 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11775 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11776 use=aaa+rv, use=aaa-40,
11777 aaa-48|ann arbor ambassador/48 lines,
11779 is2=\E7\E[60;0;0;48p\E8,
11780 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11781 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11782 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11783 use=aaa+rv, use=aaa-48,
11784 aaa-60-s|ann arbor ambassador/59 lines+status,
11787 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11788 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11789 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11790 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11791 use=aaa+rv, use=aaa-60-s,
11792 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11793 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11794 aaa-60|ann arbor ambassador/60 lines,
11796 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11798 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11799 use=aaa+rv, use=aaa-60,
11800 aaa-db|ann arbor ambassador 30/destructive backspace,
11802 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11804 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11806 flash=\E[>59h$<100>\E[>59l,
11807 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11808 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11809 guru+rv|guru changes for reverse video,
11810 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11811 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11812 use=guru+rv, use=guru-33,
11813 guru+s|guru status line,
11815 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11816 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11817 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11818 guru-nctxt|guru with no saved context,
11819 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11820 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11822 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11823 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11824 guru-24|ann arbor guru 24 lines,
11826 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11828 guru-44|ann arbor guru 44 lines,
11830 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11832 guru-44-s|ann arbor guru/44 lines+status,
11834 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11835 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11836 guru-76|guru with 76 lines by 89 cols,
11838 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11840 guru-76-s|ann arbor guru/76 lines+status,
11842 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11843 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11844 guru-76-lp|guru-lp|guru with page bigger than line printer,
11845 cols#134, lines#76,
11846 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11848 guru-76-w|guru 76 lines by 178 cols,
11849 cols#178, lines#76,
11850 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11852 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11853 cols#178, lines#75,
11854 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11855 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11856 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11857 cols#178, lines#76,
11858 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11860 aaa-rv-unk|ann arbor unknown type,
11861 lh#0, lw#0, nlab#0,
11862 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11863 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11865 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
11866 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11868 #### Applied Digital Data Systems (adds)
11870 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11871 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11872 # terminals was merged again. Then AT&T sold the terminal business to
11873 # SunRiver, which later changed its name to Boundless Technologies. The
11874 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11875 # as of early 1995) are at:
11877 # Boundless Technologies
11878 # 100 Marcus Boulevard
11879 # Hauppauge, NY 11788-3762
11880 # Vox: (800)-231-5445
11881 # Fax: (516)-342-7378
11882 # Web: http://boundless.com
11884 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11885 # In 1995 Boundless acquired DEC's terminals business.
11888 # Regent: lowest common denominator, works on all regents.
11889 # (regent: renamed ":bc:" to ":le:" -- esr)
11890 regent|Adds Regent Series,
11893 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11894 home=\EY\s\s, ind=^J, ll=^A,
11895 # Regent 100 has a bug where if computer sends escape when user is holding
11896 # down shift key it gets confused, so we avoid escape.
11897 regent100|Adds Regent 100,
11900 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11901 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11902 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11903 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11904 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11905 regent20|Adds Regent 20,
11906 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11908 regent25|Adds Regent 25,
11909 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11911 regent40|Adds Regent 40,
11913 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11914 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11915 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11916 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11917 smul=\E0`, use=regent25,
11918 regent40+|Adds Regent 40+,
11919 is2=\EB, use=regent40,
11920 regent60|regent200|Adds Regent 60,
11921 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11922 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11924 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11925 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11926 viewpoint|addsviewpoint|adds viewpoint,
11929 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11930 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11931 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11932 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11933 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11934 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11935 # Some viewpoints have bad ROMs that foo up on ^O
11936 screwpoint|adds viewpoint with ^O bug,
11937 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11939 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11940 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11941 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11942 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11943 # invis=01000100 and %c is the logical or of desired attributes.
11944 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11946 # Update by TD - 2004:
11948 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11950 # COMMANDS ASCII CODE
11952 # Address, Absolute ESC,=,row,column
11954 # Aux Port Enable ESC,@
11955 # Aux Port Disable ESC,A
11959 # Cursor forward FF
11962 # Cursor supress ETB
11963 # Cursor enable CAN
11964 # Erase to end of line ESC,T
11965 # Erase to end of page ESC,Y
11968 # Keyboard unlock SO
11969 # Read current cursor position ESC,?
11970 # Set Attribute ESC,0,x (see below for values of x)
11971 # Tag bit reset ESC,(
11972 # Tag bit set ESC,)
11973 # Transparent Print on ESC,3
11974 # Transparent Print off ESC,4
11980 # Half Intensity A 0101
11982 # Half Intensity Blinking C 0103
11983 # Reverse Video P 0120
11984 # Reverse Video Half Intensity Q 0121
11985 # Reverse Video Blinking R 0122
11986 # Reverse Video Half Intensity
11988 # Underlined ` 0140
11989 # Underlined Half Intensity a 0141
11990 # Underlined Blinking b 0142
11991 # Underlined Half Intensity
11993 # Video suppress D 0104
11994 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11996 cols#80, it#8, lines#24,
11997 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11998 cub1=^H, cud1=^J, cuf1=^L,
11999 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
12000 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
12001 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
12002 nel=^M^J, rev=\E0P\E), rmso=\E(,
12003 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
12004 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
12005 vp60|viewpoint60|addsvp60|adds viewpoint60,
12008 # adds viewpoint 90 - from cornell
12009 # Note: emacs sends ei occasionally to insure the terminal is out of
12010 # insert mode. This unfortunately puts the viewpoint90 IN insert
12011 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
12012 # - :ei=:im=: must be present in the termcap translation.)
12013 # - <xhp> indicates glitch that attributes stick to location
12014 # - <msgr> means it's safe to move in standout mode
12015 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
12017 # Function key and label capabilities merged in from SCO.
12018 vp90|viewpoint90|adds viewpoint 90,
12019 OTbs, bw, msgr, xhp,
12021 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
12022 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
12023 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
12024 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
12025 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
12026 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12027 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
12028 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
12029 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
12030 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
12031 # Note: if return acts weird on a980, check internal switch #2
12032 # on the top chip on the CONTROL pc board.
12033 adds980|a980|adds consul 980,
12036 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
12037 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
12038 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
12039 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
12040 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
12042 #### C. Itoh Electronics
12044 # As of 1995 these people no longer make terminals (they're still in the
12045 # printer business). Their terminals were all clones of the DEC VT series.
12046 # They're located in Orange County, CA.
12049 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
12050 # the delay times and do an auto tab set rather than the indirect
12051 # file used in vt100.
12052 cit80|cit-80|citoh 80,
12055 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
12056 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
12057 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12058 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
12059 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
12060 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
12061 cit101|citc|C.itoh fast vt100,
12064 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
12065 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12066 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
12067 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
12068 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
12069 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12070 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
12071 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
12073 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
12074 # The following termcap entry was created from the Callan cd100 entry. The
12075 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
12076 # full selection of combinations of reverse video, underline, and blink.
12077 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
12078 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
12079 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
12080 cit101e|C. Itoh CIT-101e,
12081 OTbs, OTpt, am, mir, msgr,
12082 cols#80, it#8, lines#24,
12083 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
12084 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
12085 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
12086 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
12087 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
12088 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
12089 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
12090 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
12091 smkx=\E=, smso=\E[7m, smul=\E[4m,
12092 # From: David S. Lawyer, June 1997:
12093 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
12094 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
12095 # late 1980's CIT Terminals went out of business.
12096 # There is no need to use the initialization string is=... (by invoking
12097 # tset or setterm etc.) provided that the terminal has been manually set
12098 # up (and the setup saved with ^S) to be compatible with this termcap. To be
12099 # compatible it should be in ANSI mode (not VT52). A set-up that
12100 # works is to set all the manually setable stuff to factory defaults
12101 # by pressing ^D in set-up mode. Then increse the brighness with the
12102 # up-arrow key since the factory default will likely be dim on an old
12103 # terminal. Then change any options you want (provided that they are
12104 # compatible with the termcap). For my terminal I set: Screen
12105 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
12106 # on. I also set up mine for parity (but you may not need it). Then
12107 # save the setup with ^S.
12108 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
12109 cit101e-rv|Citoh CIT-101e (sets reverse video),
12110 am, eo, mir, msgr, xenl, xon,
12111 cols#80, it#8, lines#24,
12112 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12113 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
12114 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12115 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12116 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12117 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12118 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
12119 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12120 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
12121 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
12122 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12123 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
12124 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
12125 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
12126 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
12127 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
12128 u7=\E[6n, u8=\E[?6c, u9=\E[c,
12129 cit101e-n|CIT-101e w/o am,
12131 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12133 cit101e-132|CIT-101e with 132 cols,
12135 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
12136 cit101e-n132|CIT-101e with 132 cols w/o am,
12139 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
12141 # CIE Terminals CIT-500 from BRL
12142 # The following SET-UP modes are assumed for normal operation:
12143 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
12144 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
12145 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
12146 # Other SET-UP modes may be set for operator convenience or communication
12148 # Hardware tabs are assumed to be set every 8 columns; they can be set up
12149 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
12150 # "stty ixon -ixany" to enable DC3/DC1 flow control!
12151 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
12152 cit500|CIE Terminals CIT-500,
12153 OTbs, OTpt, mir, msgr, xon,
12154 OTkn#10, cols#80, it#8, lines#64, vt#3,
12155 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12156 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
12157 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12158 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12159 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12160 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
12161 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
12162 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
12163 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
12164 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
12165 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
12166 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
12167 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
12168 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
12169 rmso=\E[m, rmul=\E[m,
12170 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
12171 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
12172 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12174 # C. Itoh printers begin here
12175 citoh|ci8510|8510|c.itoh 8510a,
12178 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
12179 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
12181 citoh-pica|citoh in pica,
12182 is1=\EN, use=citoh,
12183 citoh-elite|citoh in elite,
12186 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
12188 citoh-comp|citoh in compressed,
12191 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
12193 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
12194 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
12196 is1=\EP, use=citoh,
12197 citoh-6lpi|citoh in 6 lines per inch mode,
12198 is3=\EA, use=citoh,
12199 citoh-8lpi|citoh in 8 lines per inch mode,
12201 is3=\EB, use=citoh,
12203 #### Control Data (cdc)
12206 cdc456|cdc 456 terminal,
12209 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12210 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
12211 el=^V, home=^Y, il1=\EL, ind=^J,
12213 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
12217 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12218 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12219 kcuu1=^W, khome=^Y,
12220 cdc721ll|CDC Vikingll,
12222 cols#132, lines#24,
12223 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
12224 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
12225 kcuu1=^W, khome=^Y,
12226 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
12230 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12231 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
12232 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
12234 # The following switch/key settings are assumed for normal operation:
12235 # 96 chars SCROLL FULL duplex not BLOCK
12236 # Other switches may be set according to communication requirements.
12237 # Insert/delete-character cannot be used, as the whole display is affected.
12238 # "so" & "se" are commented out until jove handles "sg" correctly.
12241 OTkn#10, cols#80, lines#24,
12242 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
12243 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
12244 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
12245 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
12246 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
12247 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
12248 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
12249 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
12250 rs1=\031\030\002\003\017,
12252 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
12254 # Part of the long initialization string defines the "DOWN" key to the left
12255 # of the tab key to send an ESC. The real ESC key is positioned way out
12258 # The termcap won't work in 132 column mode due to the way it it moves the
12259 # cursor. Termcap doesn't have the capability (as far as I could tell) to
12260 # handle the 721 in 132 column mode.
12262 # (cdc721: changed :ri: to :sr: -- esr)
12263 cdc721-esc|Control Data 721,
12264 OTbs, OTpt, am, bw, msgr, xon,
12265 OTkn#10, cols#80, it#8, lines#30,
12266 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
12267 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
12268 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
12269 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
12270 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
12271 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
12272 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
12273 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
12274 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
12275 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
12276 smso=^^D, smul=^\, tbc=^^^RY,
12280 # Getronics is a Dutch electronics company that at one time was called
12281 # `Geveke' and made async terminals; but (according to the company itself!)
12282 # they've lost all their documentation on the command set. The hardware
12283 # documentation suggests the terminals were actually manufactured by a
12284 # Taiwanese electronics company named Cal-Comp. There are known
12285 # to have been at least two models, the 33 and the 50.
12288 # The 50 seems to be a top end vt220 clone, with the addition of a higher
12289 # screen resolution, a larger screen, at least 1 page of memory above and
12290 # below the screen, apparently pages of memory right and left of the screen
12291 # which can be panned, and about 75 function keys (15 function keys x normal,
12292 # shift, control, func A, func B). It also has more setup possibilities than
12293 # the vt220. The monitor case is dated November 1978 and the keyboard case is
12296 # The vt100 emulation works as is. The entry below describes the rather
12297 # non-conformant (but more featureful) ANSI mode.
12299 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
12300 visa50|geveke visa 50 terminal in ansi 80 character mode,
12303 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
12304 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
12305 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12306 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12307 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12308 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
12309 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
12310 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12311 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
12312 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
12313 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
12314 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
12315 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
12316 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
12317 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
12318 lf3=A insert line, lf4=A delete line, lf5=A clear,
12319 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
12320 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
12321 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
12322 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
12323 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
12326 #### Human Designed Systems (Concept)
12328 # Human Designed Systems
12330 # King of Prussia, PA 19406
12331 # Vox: (610)-277-8300
12332 # Fax: (610)-275-5739
12333 # Net: support@hds.com
12335 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
12336 # the character-terminal business now (1995) and making X terminals. In
12337 # particular, the whole `Concept' line described here was discontinued long
12341 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
12342 # Extensive changes to c108 by arpavax:eric Feb 1982
12343 # Some unknown person at SCO then translated it to terminfo.
12345 # There seem to be a number of different versions of the C108 PROMS
12346 # (with bug fixes in its Z-80 program).
12348 # The first one that we had would lock out the keyboard of you
12349 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
12350 # Try that on your C108 and see if it sends a ^S when you type it.
12351 # If so, you have an old version of the PROMs.
12353 # You should configure the C108 to send ^S/^Q before running this.
12354 # It is much faster (at 9600 baud) than the c100 because the delays
12356 # new status line display entries for c108-8p:
12357 # <is3> - init str #3 - setup term for status display -
12358 # set programmer mode, select window 2, define window at last
12359 # line of memory, set bkgnd stat mesg there, select window 0.
12361 # <tsl> - to status line - select window 2, home cursor, erase to
12362 # end-of-window, 1/2 bright on, goto(line#0, col#?)
12364 # <fsl> - from status line - 1/2 bright off, select window 0
12366 # <dsl> - disable status display - set bkgnd status mesg with
12369 # There are probably more function keys that should be added but
12370 # I don't know what they are.
12372 # No delays needed on c108 because of ^S/^Q handshaking
12374 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
12375 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
12376 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
12377 c108-4p|concept108-4p|concept 108 w/4 pages,
12378 OTbs, eslok, hs, xon,
12380 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
12381 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
12382 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
12383 ind=^J, is1=\EK\E!\E F,
12384 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
12385 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
12386 smcup=\EU\Ev 8p\Ep\r\E\025,
12387 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
12388 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
12389 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
12391 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
12392 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
12394 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
12396 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
12397 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
12400 # These have only window relative cursor addressing, not screen
12401 # relative. To get it to work right here, smcup/rmcup (which
12402 # were invented for the concept) lock you into a one page
12403 # window for screen style programs.
12405 # To get out of the one page window, we use a clever trick:
12406 # we set the window size to zero ("\Ev " in rmcup) which the
12407 # terminal recognizes as an error and resets the window to all
12410 # This trick works on c100 but does not on c108, sigh.
12412 # Some tty drivers use cr3 for concept, others use nl3, hence
12413 # the delays on cr and ind below. This padding is only needed at
12414 # 9600 baud and up. One or the other is commented out depending on
12415 # local conventions.
12417 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
12418 # less than 6 but more than 2 will work.
12420 # Note: can't use function keys f7-f10 because they are
12421 # indistinguishable from arrow keys (!), also, del char and
12422 # clear eol use xon/xoff so they probably won't work very well.
12424 # Also note that we don't define insrt/del char/delline/eop/send
12425 # because they don't transmit unless we reset them - I figured
12426 # it was a bad idea to clobber their definitions.
12428 # The <mc5> sequence changes the escape character to ^^ so that
12429 # escapes will be passed through to the printer. Only trouble
12430 # is that ^^ won't be - ^^ was chosen to be unlikely.
12431 # Unfortunately, if you're sending raster bits through to be
12432 # plotted, any character you choose will be likely, so we lose.
12434 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
12435 # cannot be # in is2 because it will hang a c100 with no printer
12437 c100|concept100|concept|c104|c100-4p|hds concept 100,
12438 OTbs, am, eo, mir, ul, xenl,
12439 cols#80, lines#24, pb#9600, vt#8,
12440 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
12441 cub1=^H, cud1=^J, cuf1=\E=,
12442 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
12443 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
12444 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
12445 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
12447 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
12448 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
12449 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
12450 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
12451 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
12452 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
12453 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
12454 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
12455 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
12456 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
12457 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
12458 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
12459 smso=\ED, smul=\EG,
12460 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
12461 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
12462 smso=\EE, use=c100,
12463 oc100|oconcept|c100-1p|old 1 page concept 100,
12467 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
12468 # Lots of notes, originally inline, but ncurses doesn't grok that.
12470 # am: not available in power on mode, but turned on with \E[=107;207h in
12471 # is2=. Also, \E=124l in is2= could have been used to prevent needing
12472 # to specify xenl:, but that would have rendered the last space on the
12473 # last line useless.
12474 # bw: Not available in power on mode, but turned on with \E[=107;207h in
12476 # clear: Could be done with \E[2J alone, except that vi (and probably most
12477 # other programs) assume that this also homes the cursor.
12478 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
12479 # scroll the window, and go back to window 1.
12480 # is2: the string may cause a warning to be issued by tic that it
12481 # found a very long line and that it suspects that a comma is missing
12482 # somewhere. This warning can be ignored (unless it comes up more than
12483 # once). The initialization string contains the following commands:
12485 # [Setup mode items changed from factory defaults:]
12486 # \E)0 set alternate character set to
12488 # ^O set character set to default
12489 # [In case it wasn't]
12490 # \E[m turn off all attributes
12491 # [In case they weren't off]
12492 # \E[=107; cursor wrap and
12493 # 207h character wrap on
12494 # \E[90;3u set Fkey definitions to "transmit"
12496 # \E[92;3u set cursor key definitions to
12497 # "transmit" defaults
12498 # \E[43;1u set shift F13 to transmit...
12500 # \E[44;1u set shift F14 to transmit...
12502 # \E[45;1u set shift F15 to transmit...
12504 # \E[46;1u set shift F16 to transmit...
12506 # \E[200;1u set shift up to transmit...
12508 # \E[201;1u set shift down to transmit...
12510 # \E[202;1u set shift right to transmit...
12512 # \E[203;1u set shift left to transmit...
12514 # \E[204;1u set shift home to transmit...
12516 # \E[212;1u set backtab to transmit...
12518 # \E[213;1u set shift backspace to transmit...
12520 # \E[214;1u set shift del to transmit...
12522 # [Necessary items not mentioned in setup mode:]
12523 # \E[2!w move to window 2
12524 # \E[25;25w define window as line 25 of memory
12525 # \E[!w move to window 1
12526 # \E[2*w show current line of window 2 as
12528 # \E[2+x set meta key to use high bit
12529 # \E[;3+} move underline to bottom of character
12531 # All Fkeys are set to their default transmit definitions with \E[90;3u
12532 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
12533 # setting MUST be redefined or deactivated, because the default is
12534 # contained in almost all of this terminal's Fkey strings! If for some
12535 # reason "quit" cannot be altered, the Fkeys can, but it would be
12536 # necessary to change ^| to ^] in all of these definitions, and add
12537 # \E[2;029!t to is2.
12538 # lines: is set to 24 because this terminal refuses to treat the 25th
12540 # ll: Not available in power on mode, but turned on with \E[=107;207h in
12542 # lm: Pointless, given that this definition locks a single screen of
12543 # memory into view, but what the hey...
12544 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
12545 # other attributes alone), but some programs expect this to turn off
12547 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
12548 # attributes alone), but some programs expect this to turn off
12550 # sgr: Attributes are set on this terminal with the string \E[ followed by
12551 # a list of attribute code numbers (in decimal, separated by
12552 # semicolons), followed by the character m. The attribute code
12555 # 2 for dim (which is ignored in power on mode);
12559 # 8 for not displayable; and
12560 # =99 for protected (except that there are strange side
12561 # effects to protected characters which make them inadvisable).
12562 # The mapping of terminfo parameters to attributes is as follows:
12563 # %p1 (standout) = bold and inverse together;
12564 # %p2 (underline) = underline;
12565 # %p3 (reverse) = inverse;
12566 # %p4 (blink) = blinking;
12567 # %p5 (dim) is ignored;
12568 # %p6 (bold) = bold;
12569 # %p7 (invisible) = not displayable;
12570 # %p8 (protected) is ignored; and
12571 # %p9 (alt char set) = alt char set.
12572 # The code to do this is:
12574 # %?%p1%p6%O IF (standout; bold) OR
12575 # %t;1 THEN OUTPUT ;1
12577 # %?%p2 IF underline
12578 # %t;4 THEN OUTPUT ;4
12581 # %t;5 THEN OUTPUT ;5
12583 # %?%p1%p3%O IF (standout; reverse) OR
12584 # %t;7 THEN OUTPUT ;7
12586 # %?%p7 IF invisible
12587 # %t;8 THEN OUTPUT ;8
12590 # %?%p9 IF altcharset
12591 # %t^N THEN OUTPUT ^N
12592 # %e^O ELSE OUTPUT ^O
12594 # sgr0: Everything is turned off (including alternate character set), since
12595 # there is no way of knowing what it is that the program wants turned
12597 # smul: The "underline" attribute is reconfigurable to an overline or
12598 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
12599 # bottom of the character cell. This was done to allow for more readable
12600 # underlined characters, and to be able to distinguish between an
12601 # underlined space, an underscore, and an underlined underscore.
12602 # xenl: Terminal can be configured to not need this, but this "glitch"
12603 # behavior is actually preferable with autowrap terminals.
12605 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
12606 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
12607 # string modifies the 'O' in kf43 to kf46 to a '$'.
12609 # kcbt was originally ^I but redefined in is2=.
12610 # kHOM was \E[H originally but redefined in is2=, as were a number of
12612 # kDC was originally \177 but redefined in is2=.
12614 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
12615 # tsl: Go to window 2, then do an hpa=.
12617 #------- flash=\E[8;3!}^G\E[3;3!}
12618 #------- flash=\E[?5h$<100>\E[?5l
12619 # There are two ways to flash the screen, both of which have their drawbacks.
12620 # The first is to set the bell mode to video, transmit a bell character, and
12621 # set the bell mode back - but to what? There is no way of knowing what the
12622 # user's old bell setting was before we messed with it. Worse, the command to
12623 # set the bell mode also sets the key click volume, and there is no way to say
12624 # "leave that alone", or to know what it's set to, either.
12625 # The second way to do a flash is to set the screen to inverse video, pad for a
12626 # tenth of a second, and set it back - but like before, there's no way to know
12627 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12628 # it that way. The point is moot anyway, since vi (and probably other
12629 # programs) assume that by defining flash=, you want the computer to use it
12630 # INSTEAD of bel=, rather than as a secondary type of signal.
12632 #------- cvvis=\E[+{
12633 # The is the power on setting, which is also as visible as the cursor
12635 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12636 # Windowing is possible, but not defined here because it is also used to
12637 # emulate status line functions. Allowing a program to set a window could
12638 # clobber the status line or render it unusable. There is additional memory,
12639 # but screen scroll functions are destructive and do not make use of it.
12641 #------- dim= Not available in power on mode.
12642 # You have a choice of defining low intensity characters as "half bright" and
12643 # high intensity as "normal", or defining low as "normal" and high as "bold".
12644 # No matter which you choose, only one of either "half bright" or "bold" is
12645 # available at any time, so taking the time to override the default is
12648 #------- prot=\E[=0;99m
12649 # Not defined, because it appears to have some strange side effects.
12650 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12651 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12652 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12653 # Available, but making them available to programs is inadvisable.
12654 # The code to do this is:
12655 # %?%p1%{24}%< IF ((key; 24) <;
12656 # %p1%{30}%> ((key; 30) >;
12657 # %p1%{54}%< (key; 54) <
12660 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12661 # %t\E[ THEN OUTPUT \E[
12662 # %p1%d OUTPUT (key) as decimal
12663 # [next line applies to pfx only]
12667 # %p2%s OUTPUT (string) as string
12669 # [DEL chosen as delimiter, but could be any character]
12670 # [implied: ELSE do nothing]
12674 # Not defined since anything it might do could be done faster and easier with
12675 # either Meta-Shift-Reset or the main power switch.
12677 #------- smkx=\E[1!z
12678 #------- rmkx=\E[!z
12679 # These sequences apply to the cursor and setup keys only, not to the
12680 # numeric keypad. But it doesn't matter anyway, since making these
12681 # available to programs is inadvisable.
12682 # For the key definitions below, all sequences beginning with \E$ are
12683 # custom and programmed into the terminal via is2. \E$ also has no
12684 # meaning to any other terminal.
12686 #------- cmdch=\E[;%p1%d!t
12687 # Available, but making it available to programs is inadvisable.
12688 #------- smxon=\E[1*q
12689 # Available, but making it available to programs is inadvisable.
12690 # Terminal will send XON/XOFF on buffer overflow.
12691 #------- rmxon=\E[*q
12692 # Available, but making it available to programs is inadvisable.
12693 # Terminal will not notify on buffer overflow.
12694 #------- smm=\E[2+x
12696 # Available, but making them available to programs is inadvisable.
12699 # It's not made clear in the manuals, but based on other ansi/vt type
12700 # terminals, it's a good guess that this terminal is capable of both
12701 # "transparent print" (which doesn't copy data to the screen, and
12702 # therefore needs mc5i: specified to say so) and "auxilliary print"
12703 # (which does duplicate printed data on the screen, in which case mc4=
12704 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12706 hds200|Human Designed Systems HDS200,
12707 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
12708 cols#80, it#8, lines#24, lm#0,
12709 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12710 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12711 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12712 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12713 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12714 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12715 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12716 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12717 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12718 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12720 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12721 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12722 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12723 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12724 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12725 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12726 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12727 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12728 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12729 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12730 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12731 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12732 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12733 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12734 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12735 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12736 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
12737 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
12738 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12739 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12740 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12741 vpa=\E[%i%p1%dd, use=ansi+pp,
12743 # <ht> through <el> included to specify padding needed in raw mode.
12744 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12745 avt-ns|concept avt no status line,
12746 OTbs, am, eo, mir, ul, xenl, xon,
12747 cols#80, it#8, lines#24, lm#192,
12748 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12749 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12750 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12751 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12752 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12753 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12754 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12755 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12756 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12757 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12758 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12759 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12760 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12761 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12762 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12763 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12764 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12765 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12766 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12768 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
12769 sgr0=\E[m\016$<1>, smacs=\017$<1>,
12770 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
12771 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12772 vpa=\E[%p1%{1}%+%dd,
12773 avt-rv-ns|concept avt in reverse video mode/no status line,
12774 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12776 avt-w-ns|concept avt in 132 column mode/no status line,
12777 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12779 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12780 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12781 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12783 # Concept AVT with status line. We get the status line using the
12784 # "Background status line" feature of the terminal. We swipe the
12785 # first line of memory in window 2 for the status line, keeping
12786 # 191 lines of memory and 24 screen lines for regular use.
12787 # The first line is used instead of the last so that this works
12788 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12789 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12791 avt+s|concept avt status line changes,
12794 dsl=\E[0*w, fsl=\E[1;1!w,
12795 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12796 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12797 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12798 avt|avt-s|concept-avt|avt w/80 columns,
12799 use=avt+s, use=avt-ns,
12800 avt-rv|avt-rv-s|avt reverse video w/sl,
12801 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12802 use=avt+s, use=avt-ns,
12803 avt-w|avt-w-s|concept avt 132 cols+status,
12804 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12805 use=avt+s, use=avt-ns,
12806 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12807 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12808 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12810 #### Contel Business Systems.
12813 # Contel c300 and c320 terminals.
12814 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12816 cols#80, lines#24, xmc#1,
12817 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12818 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12819 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12820 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12821 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12822 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12823 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12824 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12825 # Contel c301 and c321 terminals.
12826 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12827 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12830 #### Data General (dg)
12832 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12833 # the terminals group at Data General was shut down in 1991; all these
12834 # terminals have thus been discontinued.
12836 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12837 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12838 # sequentially, first the unmodified key codes are listed as F1 through F15.
12839 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12840 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12841 # F46 through F60. This is done in the private "includes" below whose names
12842 # start with "dgkeys+".
12844 # DG terminals generally support 8 bit characters. For each of these terminals
12845 # two descriptions are supplied:
12846 # 1) A default description for 8 bits/character communications, which
12847 # uses the default DG international character set and keyboard codes.
12848 # 2) A description with suffix "-7b" for 7 bits/character communications.
12849 # This description must use the NON-DEFAULT native keyboard language.
12851 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12852 # Ctrl/Shift fdkeys (kf34-kf44).
12854 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12855 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12856 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12857 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12858 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12859 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12860 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12861 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12862 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12863 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12864 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12865 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12866 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12867 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12868 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12869 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12870 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12871 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12872 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12873 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12874 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12875 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12876 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12877 khome=\233H, kprt=\233i,
12879 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12880 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12881 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12882 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12883 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12884 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12885 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12886 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12887 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12888 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12889 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12890 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12891 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12892 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12893 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12894 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12895 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12896 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12897 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12899 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12900 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12901 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12902 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12903 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12904 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12905 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12906 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12907 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12908 kf8=^^x, kf9=^^y, khome=^H,
12910 dgkeys+15|Private entry describing 15 DG mode special keys,
12911 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12912 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12913 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12914 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12915 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12916 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12917 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12918 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12919 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12920 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12921 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12924 # Data General color terminals use the "Tektronix" color model. The total
12925 # number of colors varies with the terminal model, as does support for
12926 # attributes used in conjunction with color.
12928 # Removed u7, u8 definitions since they conflict with tack:
12929 # Preserve user-defined colors in at least some cases.
12931 # Default is ACM mode.
12932 # u8=^^F}20^^Fi^^F}21,
12934 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12936 colors#16, ncv#53, pairs#256,
12938 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12939 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12940 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12942 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12945 # Video attributes are coordinated using static variables set by "sgr", then
12946 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12947 # (D=dim, U=underline, B=blink, R=reverse.)
12948 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12950 colors#8, ncv#16, pairs#64,
12951 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12952 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12953 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12954 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12955 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12957 dg+color|Color info for Data General D470C terminals in ANSI mode,
12958 colors#16, ncv#53, pairs#256,
12959 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12960 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12961 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12962 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12965 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12967 colors#8, ncv#16, pairs#64,
12969 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12970 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12971 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12973 dgmode+color|Color info for Data General D470C terminals in DG mode,
12974 colors#16, pairs#256,
12975 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12976 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12979 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12981 colors#52, ncv#53, pairs#26,
12982 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
12983 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12984 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12985 scp=\036RG2%p1%02X,
12987 # Colors are in the order: normal, reverse, dim, dim + reverse.
12988 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12990 colors#52, ncv#53, pairs#26,
12991 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12992 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12993 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12994 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12996 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12997 # Initialization string 1 sets:
12998 # ^R - vertical scrolling enabled
12999 # ^C - blinking enabled
13000 dg-generic|Generic Data General terminal in DG mode,
13003 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13004 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
13005 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
13006 smul=^T, use=dgkeys+11,
13008 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
13009 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
13010 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
13011 # maybe they were originally nuls (which would fit).
13013 dg200|data general dasher 200,
13016 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
13017 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
13018 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
13019 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
13020 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
13023 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
13024 dg210|dg-ansi|Data General 210/211,
13027 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
13028 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13029 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13030 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
13031 smso=\E[7;m, smul=\E[4;m,
13032 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
13033 # courtesy of Carlos Rucalde of Vantage Software, Inc.
13034 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
13035 # I suspect the d200 function keys actually work on the dg211, check it out.)
13036 dg211|Data General d211,
13037 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
13038 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
13039 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
13041 # dg450 from Cornell (not official)
13042 dg450|dg6134|data general 6134,
13043 cub1@, cuf1=^X, use=dg200,
13046 # Note: lesser Dasher terminals will not work with vi because vi insists upon
13047 # having a command to move straight down from any position on the bottom line
13048 # and scroll the screen up, or a direct vertical scroll command. The 460 and
13049 # above have both, the D210/211, for instance, has neither. We must use ANSI
13050 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
13051 # backspace on all terminals. This is not so in DG mode.
13052 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
13053 # grounds that there is no matching ":ml:"
13054 dg460-ansi|Data General Dasher 460 in ANSI-mode,
13055 OTbs, am, msgr, ul,
13056 cols#80, it#8, lines#24,
13057 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
13058 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
13059 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13060 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
13061 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13062 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
13063 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
13064 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
13065 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
13066 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
13067 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
13068 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
13069 u7=\E[6n, u8=\E[5n, u9=\E[0n,
13070 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
13071 # Data General 605x
13072 # Ought to work for a Model 6242, Type D210 as well as a 605x.
13073 # Note that the cursor-down key transmits ^Z. Job control users, beware!
13074 # This also matches a posted description of something called a `Dasher 100'
13075 # so there's a dg100 alias here.
13076 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
13077 dg6053-old|dg100|data general 6053,
13080 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
13081 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
13082 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
13083 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
13084 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
13085 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
13088 # (Some performance can be gained over the generic DG terminal type)
13089 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
13091 home=^P\0\0, ll=^P\0^W, use=dg-generic,
13093 # Like 6053, but adds reverse video and more keypad and function keys.
13094 d200|d200-dg|Data General DASHER D200,
13095 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
13096 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
13097 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
13100 # DASHER D210 series terminals in ANSI mode.
13101 # Reverse video, no insert/delete character/line, 7 bits/character only.
13103 # Initialization string 1 sets:
13104 # <0 - scrolling enabled
13105 # <1 - blink enabled
13106 # <4 - print characters regardless of attributes
13107 d210|d214|Data General DASHER D210 series,
13110 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
13111 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13112 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13113 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
13114 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
13115 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
13116 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
13117 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
13119 # DASHER D210 series terminals in DG mode.
13120 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
13121 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
13123 ed=^^FF, use=d200-dg,
13125 # DASHER D211 series terminals in ANSI mode.
13126 # Like the D210, but with 8-bit characters and local printer support.
13128 # Initialization string 2 sets:
13130 # 2;1 - 8 bit operations
13131 # 1;1 - 8 bit (international) keyboard language
13132 # \E(B - default primary character set (U.S. ASCII)
13133 # \E)4 - default secondary character set (international)
13134 # ^O - primary character set
13136 d211|d215|Data General DASHER D211 series,
13138 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
13141 # Initialization string 2 sets:
13143 # 2;0 - 7 bit operations
13144 # 1;0 - 7 bit (native) keyboard language
13145 # \E(0 - default character set (the keyboard native language)
13146 # ^O - primary character set
13147 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
13149 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
13151 # Like the D210 series, but adds support for 8-bit characters.
13153 # Reset string 2 sets:
13154 # ^^N - secondary character set
13155 # ^^FS0> - 8 bit international character set
13156 # ^^O - primary character set
13157 # ^^FS00 - default character set (matching the native keyboard language)
13159 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
13161 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
13163 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
13166 # Enhanced DG mode with changes to be more UNIX compatible.
13167 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
13170 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
13171 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
13172 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
13173 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
13174 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
13175 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
13176 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
13177 rs2=\036N\036FS0E\036O\036FS00,
13178 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13179 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
13180 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
13181 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
13183 is3=\036Fz2, use=d216+,
13185 d217-unix|Data General DASHER D217 in DG-UNIX mode,
13187 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
13190 # DASHER D220 color terminal in ANSI mode.
13191 # Like the D470C but with fewer colors and screen editing features.
13193 # Initialization string 1 sets:
13195 # <0 - scrolling enabled
13196 # <1 - blink enabled
13197 # <4 - print characters regardless of attributes
13198 # \E[m - all attributes off
13199 # Reset string 1 sets:
13200 # \Ec - initial mode defaults (RIS)
13202 d220|Data General DASHER D220,
13204 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13205 use=dg+color8, use=d470c,
13207 d220-7b|Data General DASHER D220 in 7 bit mode,
13209 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
13210 use=dg+color8, use=d470c-7b,
13212 # Initialization string 3 sets:
13213 # - default cursor (solid rectangle)
13214 # Reset string 2 sets:
13215 # ^^N - secondary character set
13216 # ^^FS0> - 8 bit international character set
13217 # ^^O - primary character set
13218 # ^^FS00 - default character set (matching the native keyboard language)
13220 d220-dg|Data General DASHER D220 color terminal in DG mode,
13222 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
13223 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
13226 # DASHER D230C color terminal in ANSI mode.
13227 # Like the D220 but with minor ANSI compatibility improvements.
13229 d230c|d230|Data General DASHER D230C,
13230 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
13231 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
13232 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
13233 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
13234 smul=\E[4;50m, use=dgkeys+7b, use=d220,
13236 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
13239 # DASHER D400/D450 series terminals.
13240 # These add intelligent features like insert/delete to the D200 series.
13242 # Initialization string 2 sets:
13243 # ^^FQ2 - default cursor (solid rectangle)
13244 # ^^FW - character protection disabled
13245 # ^^FJ - normal (80 column) mode
13246 # ^^F\^ - horizontal scrolling enabled (for alignment)
13247 # ^^FX004? - margins at columns 0 and 79
13248 # ^^F] - horizontal scrolling disabled
13249 # ^^O - primary character set
13250 # ^^FS00 - default character set (the keyboard native language)
13251 # - (should reset scrolling regions, but that glitches the screen)
13252 # Reset string 1 sets:
13253 # ^^FA - all terminal defaults except scroll rate
13254 # Reset string 2 sets:
13255 # ^^F] - horizontal scrolling disabled
13256 # ^^FT0 - jump scrolling
13258 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
13260 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
13261 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
13262 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
13263 ich1=^^J, il1=^^FH,
13264 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
13265 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
13266 rs1=^^FA, rs2=\036F]\036FT0,
13267 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
13268 sgr0=\017\025\035\036E\036O, smacs=^^N,
13269 vpa=\020\177%p1%c, use=d210-dg,
13271 # DASHER D410/D460 series terminals in ANSI mode.
13272 # These add a large number of intelligent terminal features.
13274 # Initialization string 1 sets:
13276 # <0 - scrolling enabled
13277 # <1 - blink enabled
13278 # <2 - horizontal scrolling enabled (for alignment)
13279 # <4 - print characters regardless of attributes
13280 # \E[5;0v - normal (80 column) mode
13281 # \E[1;1;80w - margins at columns 1 and 80
13283 # 1 - print all characters even if protected
13284 # 6 - character protection disabled
13285 # <2 - horizontal scrolling disabled
13286 # - (should reset scrolling regions, but that glitches the screen)
13288 # Initialization string 2 sets:
13290 # 3;2 - default cursor (solid rectangle)
13291 # 2;1 - 8 bit operations
13292 # 1;1 - international keyboard language
13293 # \E(B - default primary character set (U.S. ASCII)
13294 # \E)4 - default secondary character set (international)
13295 # ^O - primary character set
13297 # Reset string 1 sets:
13298 # \Ec - initial mode defaults (RIS)
13299 # \E[<2h - horizontal scrolling disabled
13301 # Reset string 2 sets:
13303 # 4;0 - jump scrolling
13304 # 2;1 - 8 bit operations
13305 # 1;1 - 8 bit (international) keyboard language
13306 # \E(B - default primary character set (U.S. ASCII)
13307 # \E)4 - default secondary character set (international)
13309 d410|d411|d460|d461|Data General DASHER D410/D460 series,
13311 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
13312 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13313 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
13314 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
13315 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
13316 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
13317 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
13318 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
13319 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
13321 # Initialization string 2 sets:
13323 # 3;2 - default cursor (solid rectangle)
13324 # 2;0 - 7 bit operations
13325 # 1;0 - 7 bit (native) keyboard language
13326 # \E(0 - default character set (the keyboard native language)
13327 # ^O - primary character set
13329 # Reset string 2 sets:
13331 # 4;0 - jump scrolling
13332 # 2;0 - 7 bit operations
13333 # 1;0 - 7 bit (native) keyboard language
13334 # \E(0 - default character set (the keyboard native language)
13336 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
13338 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
13339 rs2=\E[4;0;2;0;1;0v\E(0,
13340 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
13341 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
13343 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
13345 enacs@, rmacs=\036FS00,
13346 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
13347 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
13350 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
13352 # Initialization string 1 sets:
13354 # <0 - scrolling enabled
13355 # <1 - blink enabled
13356 # <2 - horizontal scrolling enabled (for alignment)
13357 # <4 - print characters regardless of attributes
13358 # \E[5;1v - compressed (135 column) mode
13359 # \E[1;1;126 - margins at columns 1 and 126
13361 # 1 - print all characters even if protected
13362 # 6 - character protection disabled
13363 # <2 - horizontal scrolling disabled
13364 # - (should reset scrolling regions, but that glitches the screen)
13366 # Reset string 1 sets:
13367 # \Ec - initial mode defaults (RIS)
13368 # \E[5;1v - compressed (135 column) mode
13369 # \E[1;1;126w - margins at columns 1 and 126
13370 # \E[<2h - horizontal scrolling disabled
13372 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
13374 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13375 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
13377 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
13379 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
13380 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
13382 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
13385 # These add intelligent features like scrolling regions.
13386 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
13387 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
13388 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
13389 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
13390 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
13391 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
13392 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
13393 vpa=\036FPFF%p1%2.2X,
13394 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13396 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
13398 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
13399 rs2=\036P@1\036FK\036FX0083,
13400 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
13402 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
13405 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
13407 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
13409 clear=\036FG\036PH, fsl=\036F}01\022,
13410 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
13411 tsl=\036F}00\036FP%p1%2.2X18\036PG,
13412 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
13415 # Relative cursor motions are confined to the current window,
13416 # which is not what the scrolling region specification expects.
13417 # Thus, relative vertical cursor positioning must be deleted.
13418 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
13419 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
13420 cud1@, cuu1@, ll@, use=d462+,
13422 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
13424 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
13426 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
13428 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
13430 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
13433 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
13435 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
13437 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
13439 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
13441 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
13444 d430c-dg|d430-dg|Data General D430C in DG mode,
13445 use=d413-dg, use=dg+fixed,
13446 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
13447 use=d413-dg, use=dg+ccc,
13449 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
13450 use=d413-unix, use=dgunix+fixed,
13451 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
13452 use=d413-unix-w, use=dgunix+fixed,
13453 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
13454 use=d413-unix-25, use=dgunix+fixed,
13455 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
13456 use=d413-unix-s, use=dgunix+fixed,
13457 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
13458 use=d413-unix-sr, use=dgunix+fixed,
13459 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
13460 use=d413-unix, use=dgunix+ccc,
13461 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
13462 use=d413-unix-w, use=dgunix+ccc,
13463 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
13464 use=d413-unix-25, use=dgunix+ccc,
13465 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
13466 use=d413-unix-s, use=dgunix+ccc,
13467 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
13468 use=d413-unix-sr, use=dgunix+ccc,
13470 # DASHER D470C color terminal in ANSI mode.
13471 # Like the D460 but with 16 colors and without a compressed mode.
13473 # Initialization string 1 sets:
13475 # <0 - scrolling enabled
13476 # <1 - blink enabled
13477 # <2 - horizontal scrolling enabled (for alignment)
13478 # <4 - print characters regardless of attributes
13479 # \E[1;1;80w - margins at columns 1 and 80
13481 # 1 - print all characters even if protected
13482 # 6 - character protection disabled
13483 # <2 - horizontal scrolling disabled
13484 # - (should reset scrolling regions, but that glitches the screen)
13486 d470c|d470|Data General DASHER D470C,
13487 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13488 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
13489 use=dg+color, use=d460,
13491 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
13492 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
13493 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
13494 use=dg+color, use=d460-7b,
13496 # Initialization string 2 sets:
13497 # ^^FQ2 - default cursor (solid rectangle)
13498 # ^^FW - character protection disabled
13499 # ^^F\^ - horizontal scrolling enabled (for alignment)
13500 # ^^FX004? - margins at columns 0 and 79
13501 # ^^F] - horizontal scrolling disabled
13502 # ^^O - primary character set
13503 # ^^FS00 - default character set (the keyboard native language)
13504 # - (should reset scrolling regions, but that glitches the screen)
13506 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
13507 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
13508 use=dgmode+color, use=d460-dg,
13510 # DASHER D555 terminal in ANSI mode.
13511 # Like a D411, but has an integrated phone.
13512 d555|Data General DASHER D555,
13514 d555-7b|Data General DASHER D555 in 7-bit mode,
13516 d555-w|Data General DASHER D555 in wide mode,
13518 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
13520 d555-dg|Data General DASHER D555 series in DG mode,
13523 # DASHER D577 terminal in ANSI mode.
13524 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
13525 d577|Data General DASHER D577,
13527 d577-7b|Data General DASHER D577 in 7-bit mode,
13529 d577-w|Data General DASHER D577 in wide mode,
13531 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
13534 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
13537 # DASHER D578 terminal.
13538 # Like a D577, but without compressed mode; like a D470C in this respect.
13540 # Initialization string 1 sets:
13542 # <0 - scrolling enabled
13543 # <1 - blink enabled
13544 # <2 - horizontal scrolling enabled (for alignment)
13545 # <4 - print characters regardless of attributes
13546 # \E[1;1;80w - margins at columns 1 and 80
13548 # 1 - print all characters even if protected
13549 # 6 - character protection disabled
13550 # <2 - horizontal scrolling disabled
13551 # - (should reset scrolling regions, but that glitches the screen)
13553 d578|Data General DASHER D578,
13554 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
13555 d578-7b|Data General DASHER D578 in 7-bit mode,
13556 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
13558 #### Datamedia (dm)
13560 # Datamedia was headquartered in Nashua, New Hampshire until it went
13561 # out of business in 1993, but the ID plates on the terminals referred
13562 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
13563 # manufacturer which threw out all information about the terminals.
13566 cs10|colorscan|Datamedia Color Scan 10,
13569 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13570 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13571 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13572 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
13573 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13574 cs10-w|Datamedia Color Scan 10 with 132 columns,
13576 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
13578 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
13579 dm1520|dm1521|datamedia 1520,
13581 cols#80, it#8, lines#24,
13582 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13583 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13584 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
13586 # dm2500: this terminal has both <ich> and <smir>. Applications using
13587 # termcap/terminfo directly (rather than through ncurses) might be confused.
13588 dm2500|datamedia2500|datamedia 2500,
13591 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
13592 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
13593 dch1=\020\010\030\035$<10*>,
13594 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
13595 ich1=\020\034\030\035$<10*>,
13596 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
13597 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
13598 smdc=^P, smir=^P, smso=^N,
13599 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
13600 # also, has a meta-key.
13601 # From: <goldberger@su-csli.arpa>
13602 # (dmchat: ":MT:" changed to ":km:" -- esr)
13603 dmchat|dmchat version of datamedia 2500,
13605 dl1=\020\032\030\035$<2/>,
13606 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
13607 # (dm3025: ":MT:" changed to ":km:" -- esr)
13608 dm3025|datamedia 3025a,
13610 cols#80, it#8, lines#24,
13611 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13612 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
13613 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
13614 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
13615 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
13616 smir=\EP, smso=\EO1,
13617 dm3045|datamedia 3045a,
13618 OTbs, am, eo, km@, ul, xenl,
13619 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
13620 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
13621 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
13622 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13624 # Datamedia DT80 soft switches:
13625 # 1 0=Jump 1=Smooth
13626 # Autorepeat 0=off 1=on
13627 # Screen 0=Dark 1=light
13628 # Cursor 0=u/l 1=block
13630 # 2 Margin Bell 0=off 1=on
13631 # Keyclick 0=off 1=on
13632 # Ansi/VT52 0=VT52 1=Ansi
13633 # Xon/Xoff 0=Off 1=On
13635 # 3 Shift3 0=Hash 1=UK Pound
13637 # Newline 0=Off 1=On
13638 # Interlace 0=Off 1=On
13640 # 4 Parity 0=Odd 1=Even
13641 # Parity 0=Off 1=On
13642 # Bits/Char 0=7 1=8
13643 # Power 0=60Hz 1=50Hz
13645 # 5 Line Interface 0=EIA 1=Loop
13646 # Aux Interface 0=EIA 1=Loop
13647 # Local Copy 0=Off 1=On
13650 # 6 Aux Parity 0=Odd 1=Even
13651 # Aux Parity 0=Off 1=On
13652 # Aux Bits/Char 0=7 1=8
13653 # CRT Saver 0=Off 1=On
13654 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13655 dm80|dmdt80|dt80|datamedia dt80/1,
13656 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13657 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13658 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13659 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13661 # except in 132 column mode, where it needs a little padding.
13662 # This is still less padding than the vt100, and you can always turn on
13663 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13665 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13667 clear=\E[H\E[2J$<50/>, cud1=^J,
13668 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13669 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13670 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13671 dt80-sas|Datamedia DT803/DTX for SAS usage,
13674 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13675 bel=^G, clear=^L, cr=^M,
13676 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13677 cub1=^H, cud1=\EB, cuf1=^\,
13678 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13679 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13680 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13681 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13682 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13683 smso=\E$2\004, tbc=\E'0,
13685 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13686 # These aren't end-all Excel termcaps; but do insert/delete char/line
13687 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13688 # The naming convention has been bent somewhat, with the use of E? (where
13689 # E is for 'Excel') as # a name. This was done to distinguish the entries
13690 # from the other Datamedias in use here, and yet to associate a model of
13691 # the Excel terminals with the regular datamedia terminals that share
13692 # major characteristics.
13693 excel62|excel64|datamedia Excel 62,
13694 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13695 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13697 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13698 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13699 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13701 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13702 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13703 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13704 smir=\E[4h, use=dt80,
13708 # Falco Data Products
13709 # 440 Potrero Avenue
13710 # Sunnyvale, CA 940864-196
13711 # Vox: (800)-325-2648
13712 # Fax: (408)-745-7860
13713 # Net: techsup@charm.sys.falco.com
13715 # Current Falco models as of 1995 are generally ANSI-compatible and support
13716 # emulations of DEC VT-series, Wyse, and Televideo types.
13719 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13720 # This terminal was released around 1983 and was discontinued long ago.
13721 # The standout and underline highlights are the same.
13722 falco|ts1|ts-1|falco ts-1,
13724 cols#80, it#8, lines#24,
13725 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13726 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13727 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13728 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13729 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13730 smir=\Eq, smso=\Eg1, smul=\Eg1,
13731 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13732 OTbs, am, da, db, mir, msgr, ul,
13733 cols#80, it#8, lines#24,
13734 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13735 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13736 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13737 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13738 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13739 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13740 smso=\Eg4, smul=\Eg1,
13741 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13742 ts100|ts100-sp|falco ts100-sp,
13743 am, mir, msgr, xenl, xon,
13744 cols#80, it#8, lines#24, vt#3,
13745 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13746 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13747 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13748 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13749 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13750 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13751 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13752 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13753 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13754 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13755 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13756 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13757 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13758 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13759 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13760 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13762 ts100-ctxt|falco ts-100 saving context,
13763 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13765 #### Florida Computer Graphics
13768 # Florida Computer Graphics Beacon System, using terminal emulator program
13769 # "host.com", as provided by FCG. This description is for an early release
13770 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13773 # From: David Bryant <cbosg!djb> 1/7/83
13774 beacon|FCG Beacon System,
13777 bel=\ESTART\r\E37\r\EEND\r$<1>,
13778 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13779 cub1=^H, cud1=^J, cuf1=\EV,
13780 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13781 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13782 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13783 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13784 rmul=\ESTART\r\E60\,0\r\EEND\r,
13785 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13786 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13787 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13788 smul=\ESTART\r\E60\,1\r\EEND\r,
13793 # The f1720a differences from ANSI: no auto margin, destructive
13794 # tabs, # of lines, funny highlighting and underlining
13795 f1720|f1720a|fluke 1720A,
13797 cols#80, lines#16, xmc#1,
13798 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13799 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13800 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13801 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13802 smso=\E[7m, smul=\E[4m,
13804 #### Liberty Electronics (Freedom)
13806 # Liberty Electronics
13807 # 48089 Fremont Blvd
13809 # Vox: (510)-623-6000
13810 # Fax: (510)-623-7021
13812 # From: <faletti@berkeley.edu>
13813 # (f100: added empty <acsc> to suppress a tic warning;
13814 # made this relative to adm+sgr -- note that <invis> isn't
13815 # known to work for f100 but does on the f110. --esr)
13816 f100|freedom|freedom100|freedom model 100,
13817 OTbs, am, bw, hs, mir, msgr, xon,
13819 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13820 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13821 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13822 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13823 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13824 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13825 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13826 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13827 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13828 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13829 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13830 f100-rv|freedom-rv|freedom 100 in reverse video,
13831 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13832 # The f110 and f200 have problems with vi(1). They use the ^V
13833 # code for the down cursor key. When kcud1 is defined in terminfo
13834 # as ^V, the Control Character Quoting capability (^V in insert mode)
13835 # is lost! It cannot be remapped in vi because it is necessary to enter
13836 # a ^V to to quote the ^V that is being remapped!!!
13838 # f110/f200 users will have to decide whether
13839 # to lose the down cursor key or the quoting capability. We will opt
13840 # initially for leaving the quoting capability out, since use of VI
13841 # is not generally applicable to most interactive applications
13842 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13843 f110|freedom110|Liberty Freedom 110,
13846 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13847 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13848 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13849 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13850 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13851 smso=\EG<, tsl=\Ef, use=f100,
13852 f110-14|Liberty Freedom 110 14inch,
13854 f110-w|Liberty Freedom 110 - 132 cols,
13855 cols#132, use=f110,
13856 f110-14w|Liberty Freedom 110 14in/132 cols,
13859 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13860 f200|freedom200|Liberty Freedom 200,
13861 OTbs, am, eslok, hs, mir, msgr, xon,
13862 cols#80, it#8, lines#24, wsl#80,
13863 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13864 clear=^Z, cnorm=\E.1, cr=^M,
13865 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13866 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13867 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13868 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13869 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13870 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13871 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13872 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13873 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13874 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13875 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13876 f200-w|Liberty Freedom 200 - 132 cols,
13877 cols#132, use=f200,
13878 # The f200 has the ability to reprogram the down cursor key. The key is
13879 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13880 # so powering the terminal off and on will not cause the change to be lost.
13881 f200vi|Liberty Freedom 200 for vi,
13882 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13883 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13884 cols#132, use=f200vi,
13888 # Graphon Corporation
13889 # 544 Division Street
13890 # Campbell, CA 95008
13891 # Vox: (408)-370-4080
13892 # Fax: (408)-370-5047
13893 # Net: troy@graphon.com (Troy Morrison)
13896 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13897 # including one odd hybrid that starts out life on power-up as a character
13898 # terminal, than can be switched to X graphics mode (driven over the serial
13899 # line) by an escape sequence. No info on this beast yet.
13900 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13901 go140|graphon go-140,
13903 cols#80, it#8, lines#24,
13904 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
13905 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13906 ed=\E[J$<10/>, el=\E[K, ht=^I,
13907 if=/usr/share/tabset/vt100, il1=\E[L,
13908 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13909 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13910 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13911 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13912 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13913 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13914 go140w|graphon go-140 in 132 column mode,
13917 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13919 # Hacked up vt200 termcap to handle GO-225/VT220
13920 # From: <edm@nwnexus.WA.COM>
13921 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13922 go225|go-225|Graphon 225,
13923 OTbs, am, mir, xenl,
13924 cols#80, it#8, lines#25, vt#3,
13925 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13926 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13927 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13928 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13929 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13930 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13931 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13932 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13933 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13934 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13935 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13936 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13938 #### Harris (Beehive)
13940 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13941 # Their terminal group is ancient history now (1995) though the parent
13942 # company is still in business.
13945 # Beehive documentation is undated and marked Preliminary and has no figures
13946 # so we must have early Superbee2 (Model 600, according to phone conversation
13947 # with mfr.). It has proved reliable except for some missing padding
13948 # (notably after \EK and <nl> at bottom of screen).
13950 # The key idea is that AEP mode is poison for <cup> & that US's in
13951 # the local memory should be avoided like the plague. That means
13952 # that the 2048 character local buffer is used as 25 lines of 80
13953 # characters, period. No scrolling local memory, folks. It also
13954 # appears that we cannot use naked INS LINE feature since it uses
13955 # US. The sbi fakes <il1> with an 80-space insert that may be too
13956 # slow at low speeds; also spaces get converted to \040 which is
13957 # too long for some programs (not vi). DEL LINE is ok but slow.
13959 # The <nl> string is designed for last line of screen ONLY; cup to
13960 # 25th line corrects the motion inherent in scrolling to Page 1.
13962 # There is one understood bug. It is that the screen appears to
13963 # pop to a new (blank) page after a <nel>, or leave a half-line
13964 # ellipsis to a quad that is the extra 48 memory locations. The
13965 # data received is dumped into memory but not displayed. Not to
13966 # worry if <cup> is being used; the lines not displayed will be,
13967 # whenever the cursor is moved up there. Since <cup> is addressed
13968 # relative to MEMORY of window, nothing is lost; but beware of
13969 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13970 # therefore, is setenv MORE -c .
13972 # WARNING: Not all features tested.
13974 # Timings are assembled from 3 sources. Some timings may reflect
13975 # SB2/Model 300 that were used if more conservative.
13976 # Tested on a Model 600 at 1200 and 9600 bd.
13978 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13979 # placed on the keyboard and useless because of AEP, is made
13980 # into a backspace key. In use ESC must be pressed twice (to send)
13981 # and sending ^C must be prefixed by ESC to avoid that weird
13982 # transmit mode associated with ENTER key.
13984 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13985 # the screen, then it has dropped into ENTER mode; hit
13986 # RESET--ONLINE--!tset.
13988 # As delivered this machine has a FATAL feature that will throw
13989 # it into that strange transmit state (SPOW) if the space bar is
13990 # hit after a CR is received, but before receiving a LF (or a
13993 # The circuits MUST be modified to eliminate the SPOW latch.
13994 # This is done by strapping on chip A46 of the I/O board; cut
13995 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13996 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13997 # With this modification absurdly high timings on cr are
14000 # NOTE WELL that the rear panel switch should be set to CR/LF,
14003 sb1|beehive superbee,
14004 OTbs, am, bw, da, db, mir, ul, xsb,
14005 cols#80, lines#25, xmc#1,
14006 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
14007 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
14008 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
14009 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
14010 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
14011 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
14012 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
14013 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
14014 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
14015 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
14016 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
14017 smso=\E_1, smul=\E_0, tbc=\E3,
14018 sbi|superbee|beehive superbee at Indiana U.,
14020 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
14022 # Alternate (older) description of Superbee - f1=escape, f2=^C.
14023 # Note: there are at least 3 kinds of superbees in the world. The sb1
14024 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
14025 # The sb3 puts garbage on the bottom of the screen when you scroll with
14026 # the switch in the back set to CRLF instead of AEP. This description
14027 # is tested on the sb2 but should work on all with either switch setting.
14028 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
14029 # the other two if you want to try to hit that tiny escape key.
14030 # This description is tricky: being able to use cup depends on there being
14031 # 2048 bytes of memory and the hairy <nl> string.
14032 superbee-xsb|beehive super bee,
14034 cols#80, it#8, lines#25,
14035 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
14036 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
14037 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
14038 home=\EH, ht=^I, hts=\E1,
14039 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
14040 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
14041 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
14042 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
14043 # This loses on lines > 80 chars long, use at your own risk
14044 superbeeic|super bee with insert char,
14045 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
14046 sb2|sb3|fixed superbee,
14047 xsb@, use=superbee,
14049 #### Beehive Medical Electronics
14051 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
14052 # Regarding your question though; Beehive terminals weren't made by Harris.
14053 # They were made by Beehive Medical Electronics in Utah. They went out of
14054 # business in the early '80s.
14056 # (OK, then, I don't know why a couple of these say "harris beehive".)
14059 # Reports are that most of these Beehive entries (except superbee) have not
14060 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
14062 # (bee: <ich1> was empty, which is obviously bogus -- esr)
14063 beehive|bee|harris beehive,
14066 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
14067 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
14068 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
14069 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14070 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
14071 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
14072 smir=\EQ, smso=\EdP, smul=\Ed`,
14073 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
14074 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
14075 # look at those spaces in <rmso>/<smso>. Seems strange to me...
14076 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
14077 # really care, cook up one using ^F -- esr)
14078 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
14080 cols#80, it#8, lines#20,
14081 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
14082 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
14083 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
14084 beehive4|bh4|beehive 4,
14087 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14088 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
14089 # There was an early Australian kit-built computer called a "Microbee".
14090 # It's not clear whether this is for one of those or for a relative
14092 microb|microbee|micro bee series,
14094 cols#80, it#8, lines#24,
14095 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14096 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14097 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14098 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
14099 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
14100 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
14102 # 8675, 8686, and bee from Cyrus Rahman
14103 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
14104 ha8675|harris 8675,
14105 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
14106 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
14107 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
14108 kf8=\177, kf9=\Ee, use=bee,
14109 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
14111 ha8686|harris 8686,
14112 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
14113 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
14114 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
14115 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
14116 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
14121 # Hazeltine appears to be out of the terminal business as of 1995. These
14122 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
14123 # Harris. They have a hazeltine.com domain (but no web page there ) and can
14127 # 450 East Pulaski Road
14128 # Greenlawn, New York 11740
14130 # As late as 1993, manuals for the terminal product line could still be
14133 # TRW Customer Service Division
14136 # Fairfield, NJ 07007-2078
14138 # They're now (1998) a subsidiary of General Electric, operating under the
14139 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
14140 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
14143 # Since <cuf1> is blank, when you want to erase something you
14144 # are out of luck. You will have to do ^L's a lot to
14145 # redraw the screen. h1000 is untested. It doesn't work in
14146 # vi - this terminal is too dumb for even vi. (The code is
14147 # there but it isn't debugged for this case.)
14148 hz1000|hazeltine 1000,
14151 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
14153 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
14154 hz1420|hazeltine 1420,
14157 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
14158 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
14159 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
14161 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
14162 # freakout with out-of-range args and tn3270. No hz since it needs to
14164 hz1500|hazeltine 1500,
14167 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14168 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
14169 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
14170 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
14171 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
14172 # h1510 assumed to be in sane escape mode. Else use h1500.
14173 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
14174 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
14175 # removed incorrect and overridden ":do=^J:" -- esr)
14176 hz1510|hazeltine 1510,
14179 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
14180 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
14181 el=\E^O, il1=\E^Z, ind=^J,
14183 # The following switch settings are assumed for normal operation:
14184 # FULL CR U/L_CASE ESCAPE
14185 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
14186 # Other switches may be set for operator convenience or communication
14188 hz1520|Hazeltine 1520,
14189 OTbs, am, bw, msgr,
14191 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
14192 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14193 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
14194 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
14195 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
14196 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
14197 # This version works with the escape switch off
14198 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
14199 hz1520-noesc|hazeltine 1520,
14202 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14203 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
14204 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
14205 # Note: the h1552 appears to be the first Hazeltine terminal which
14206 # is not braindamaged. It has tildes and backprimes and everything!
14207 # Be sure the auto lf/cr switch is set to cr.
14208 hz1552|hazeltine 1552,
14210 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
14211 lf2=red, lf3=green, use=vt52,
14212 hz1552-rv|hazeltine 1552 reverse video,
14213 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
14214 # Note: h2000 won't work well because of a clash between upper case and ~'s.
14215 hz2000|hazeltine 2000,
14218 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
14219 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
14220 il1=~\032$<6>, ind=^J, pad=\177,
14221 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
14222 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
14223 # to work ok. There is one problem though if one types a lot of garbage
14224 # characters very fast vi seems not able to keep up and hangs while trying
14225 # to insert. That's in insert mode while trying to insert in the middle of
14226 # a line. It might be because the Esprit doesn't have insert char and delete
14227 # char as a built in function. Vi has to delete to end of line and then
14228 # redraw the rest of the line.
14229 esprit|Hazeltine Esprit I,
14232 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
14233 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
14234 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
14235 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
14236 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
14237 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
14238 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
14239 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
14240 esprit-am|hazeltine esprit auto-margin,
14242 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
14243 # Vi it seems always wants to send a control J for "do" and it turned out
14244 # that the terminal would work somewhat if the auto LF/CR was turned off.
14245 # (hmod1: removed :dn=~^K: -- esr)
14246 hmod1|Hazeltine Modular 1,
14249 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
14250 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
14251 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
14252 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
14254 # Hazeltine Executive 80 Model 30 (1554?)
14255 # from Will Martin <control@ALMSA-1.ARPA> via BRL
14256 # Like VT100, except for different "am" behavior.
14257 hazel|exec80|h80|he80|Hazeltine Executive 80,
14259 cols#80, it#8, lines#24, vt#3,
14260 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
14261 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14262 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
14263 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
14264 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
14265 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
14266 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14267 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
14268 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
14269 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
14270 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14271 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
14277 ibm327x|line mode IBM 3270 style,
14279 clear=^M^J, el=^M, home=^M,
14281 ibm3101|i3101|IBM 3101-10,
14284 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14285 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14286 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
14287 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
14288 ibm3151|IBM 3151 display,
14289 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
14290 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
14291 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
14292 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
14293 # removed kend, knp, kpp -TD
14294 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
14295 OTbs, am, mir, msgr,
14296 cols#80, it#8, lines#24,
14297 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
14298 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
14299 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14300 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
14301 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
14302 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
14303 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
14304 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
14305 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
14306 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
14307 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
14308 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
14309 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
14310 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
14311 rmso=\E4@, rmul=\E4@,
14312 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
14313 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
14315 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
14316 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
14317 ibm3162|IBM 3162 display,
14318 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
14319 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
14322 # This really should not use setab/setaf, but it is clear that the
14323 # original terminfo does not toggle red/blue colors as in setb/setf.
14324 ibm3164|i3164|IBM 3164,
14326 colors#8, pairs#64,
14327 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
14328 setab=\E4 %p1%{64}%+%c,
14329 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
14330 smcup=\E!9/N\E>B, use=ibm3161,
14332 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
14334 cols#80, it#8, lines#25,
14335 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14336 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14337 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14338 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14339 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
14340 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
14341 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
14342 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
14343 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14344 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
14345 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
14346 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
14347 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
14348 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
14349 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
14350 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
14351 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
14352 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
14353 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14354 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
14355 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
14356 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
14357 rmso=\E[m, rmul=\E[m, rs2=\Ec,
14358 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
14359 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14361 ibmaed|IBM Experimental display,
14362 OTbs, am, eo, msgr,
14363 cols#80, it#8, lines#52,
14364 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
14365 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14366 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
14367 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14368 rmso=\E0, sgr0=\E0, smso=\E0,
14369 ibm-apl|apl|IBM apl terminal simulator,
14370 lines#25, use=dm1520,
14371 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
14372 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
14373 ibmmono|IBM workstation monochrome,
14375 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
14376 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
14377 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
14378 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
14379 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
14380 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
14382 ibmega|IBM Enhanced Color Display,
14383 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14384 nel=^M^J, use=ibmmono,
14385 # This color scheme is assumed in some recent IBM terminal descriptions
14386 # (green on black, emulated on a 16-color terminal).
14387 ibm+color|IBM color definitions,
14388 colors#8, ncv#3, pairs#64,
14390 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
14391 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
14392 ibm+16color|IBM aixterm color definitions,
14393 colors#16, pairs#256,
14394 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
14395 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
14396 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14397 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
14398 ibm5154|IBM 5154 Color display,
14399 colors#8, ncv@, pairs#64,
14400 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14402 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
14403 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
14405 ibmvga-c|IBM VGA display color termcap,
14406 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14407 nel=^M^J, use=ibmega-c,
14408 ibmvga|IBM VGA display,
14409 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
14410 nel=^M^J, use=ibmega,
14411 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
14412 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
14414 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
14415 ibm6155|IBM 6155 Black & White display,
14416 blink@, bold@, use=ibm5151,
14417 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
14418 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
14420 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
14421 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
14423 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
14425 ibm6154|IBM 6154 Color displays,
14426 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14427 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14428 sgr0=\E[0;10m, use=ibm5154,
14429 ibm6153|IBM 6153 Black & White display,
14430 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
14431 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
14432 sgr0=\E[0;10m, use=ibm5151,
14433 ibm6153-90|IBM 6153 Black & White display,
14435 blink@, bold@, use=ibm5151,
14436 ibm6153-40|IBM 6153 Black & White display,
14437 cols#40, lines#12, use=ibm6153-90,
14438 ibm8512|ibm8513|IBM color VGA Terminal,
14440 cols#80, it#8, lines#25,
14441 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
14442 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
14443 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
14444 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
14445 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
14446 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
14447 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14448 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
14449 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
14450 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
14451 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
14452 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
14453 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14455 hft-c|HFT with Color,
14456 colors#8, pairs#64,
14457 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
14458 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
14459 use=ibm5151, use=ibm+color,
14460 hft-c-old|HFT with Color PC850,
14461 colors#8, pairs#64,
14462 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
14464 hft-old|AIWS High Function Terminal,
14467 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
14468 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14469 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14470 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
14471 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14472 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
14473 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
14474 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
14475 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
14476 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
14477 ibm-system1|system1|ibm system/1 computer,
14480 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
14481 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
14483 # lft-pc850 : IBM Low Function Terminal Device
14484 # lft "supports" underline, bold, and blink in the sense that the lft code
14485 # sets all the right bits. HOWEVER, depending upon the adapter, these
14486 # attributes may or may not be supported by the device driver.
14487 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
14489 cols#80, it#8, lines#25,
14490 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
14491 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
14492 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14493 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14494 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14495 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
14496 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
14497 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
14498 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
14499 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
14500 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
14501 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
14502 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
14503 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
14504 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
14505 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
14506 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
14507 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
14508 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
14509 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
14510 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
14511 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
14512 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
14513 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14514 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14516 # "Megapel" refers to the display adapter, which was used with the IBM RT
14518 ibm5081|hft|IBM Megapel Color display,
14519 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
14520 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
14521 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
14524 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
14526 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
14528 ibm8514|IBM 8514/a color VGA display,
14530 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
14531 ibm8514-c|IBM 8514 color display with standout and underline,
14534 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
14535 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
14539 # AIX entries. IBM ships these with AIX 3.2.5.
14540 # -- added rc, sc based on manpage -TD
14541 # Note that we could use ibm+16color, but that is not how IBM defines this one.
14542 aixterm|IBM Aixterm Terminal Emulator,
14544 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14545 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14546 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
14547 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
14548 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
14550 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
14551 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
14552 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14553 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
14554 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
14556 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
14557 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
14558 tsl=\E[?%p1%dT, use=ibm6153,
14559 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
14560 acsc@, use=aixterm,
14561 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
14562 acsc@, use=aixterm-m,
14564 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
14565 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
14566 use=ibm+16color, use=aixterm,
14568 #### Infoton/General Terminal Corp.
14571 # gt100 sounds like something DEC would come out with. Let's hope they don't.
14572 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
14575 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14576 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
14577 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
14578 ind=^J, rmso=\Ea, smso=\Eb,
14582 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14583 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
14584 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
14585 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
14586 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
14590 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
14591 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
14592 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
14596 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
14597 ed=^K, ind=^J, ll=^H^\,
14599 # The ICL6402 was actually the Kokusai Display System 6402.
14600 # The 6404 was the KDS7372 (color version of the 6402).
14602 # ICL6404 control codes follow:
14605 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14606 #ctrl-A set SOM position at cursor position
14612 #ctrl-L Cursor right
14613 #ctrl-M Carriage return
14614 #ctrl-N Disable xon/xoff to host
14615 #ctrl-O Enable xon/xoff to host
14616 #ctrl-R Enable bidirectional mode
14617 #ctrl-T Disable bidirectional mode
14618 #ctrl-V Cursor down
14619 #ctrl-Z Clear unprotected data to insert char
14620 #ctrl-^ Cursor home
14623 #ESC lead-in char for multiple character command
14625 #ESC space R execute power on sequence
14626 #ESC ! p1 p2 define scroll region:
14627 # p1 = scroll top line: 20h - 37h
14628 # p1 = scroll bottom line: 20h - 37h
14629 #ESC " unlock keyboard
14630 #ESC # lock keyboard
14631 #ESC $ Semi-graphics mode on
14632 #ESC % Semi-graphics mode off
14633 #ESC & protect mode on
14634 #ESC ' protect mode off
14635 #ESC ( write protect mode off (full intensity)
14636 #ESC ) write protect mode on (half intensity)
14638 #ESC * clear screen
14639 #ESC + clear unprotected data to insert char
14640 #ESC , clear unprotected data to half intensity spaces
14641 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14642 # p1 = page number 0 - 3
14643 # p2 = row 20h - 7fh
14644 # p3 = column (lo) 20h - 7fh
14645 # p4 = column (hi) 20h - 21h (only 132 col)
14646 #ESC . p1 set cursor style:
14647 # p1 = 0 invisible cursor
14648 # p1 = 1 block blinking cursor
14649 # p1 = 2 block steady cursor
14650 # p1 = 3 underline blinking cursor
14651 # p1 = 4 underline steady cursor
14652 #ESC / transmit cursor location (page, row, column)
14653 #ESC 0 p1 p2 p3 p4 program edit key:
14654 # p1 = edit key code: '@'-'S', '`'-'s'
14655 # p2 p3 p4 = program data (3 bytes)
14658 #ESC 2 clear tab at cursor
14659 #ESC 3 clear all tabs
14660 #ESC 4 send unprotect line to cursor
14661 #ESC 5 send unprotect page to cursor
14662 #ESC 6 send line to cursor
14663 #ESC 7 send page to cursor
14664 #ESC 8 n set scroll mode:
14665 # n = 0 set jump scroll
14666 # n = 1 set smooth scroll
14667 #ESC 9 n control display:
14668 # n = 0 display off
14670 #ESC : clear unprotected data to null
14671 #ESC ; clear unprotected data to insert char
14674 #ESC = p1 p2 address cursor to row, column
14675 # p1 = row 20h - 7fh
14676 # p2 = column (lo) 20h - 7fh
14677 # p3 = column (hi) 20h - 21h (only 132 col)
14678 #ESC > keyclick off
14679 #ESC ? transmit cursor location (row, column)
14681 #ESC @ copy print mode on
14682 #ESC A copy print mode off
14683 #ESC B block mode on
14684 #ESC C block mode off (conversation mode)
14685 #ESC D F set full duplex
14686 #ESC D H set half duplex
14688 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14689 # 0 = black, 1 = red, 2 = green, 3 = yellow
14690 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14691 #ESC G n set serial field attribute (n = 30h - 3Fh)
14692 #ESC H n full graphics mode:
14693 # n = 0 exit full graphics mode
14694 # n = 1 enter full graphics mode
14697 #ESC K forward page
14699 #ESC L unformatted page print
14700 #ESC M L move window left (132 col mode only)
14701 #ESC M R move window right (132 col mode only)
14702 #ESC N set page edit (clear line edit)
14703 #ESC O set line edit (clear page edit)
14704 #ESC P formatted page print
14705 #ESC Q character insert
14707 #ESC S send message unprotected only
14708 #ESC T erase line to insert char
14709 #ESC U set monitor mode (see ESC X, ESC u)
14711 #ESC V n select video attribute mode:
14712 # n = 0 serial field attribute mode
14713 # n = 1 parallel character attribute mode
14714 #ESC V 2 n define line attribute:
14715 # n = 0 single width single height
14716 # n = 1 single width double height
14717 # n = 2 double width single height
14718 # n = 3 double width double height
14719 #ESC V 3 n select character font:
14720 # n = 0 system font
14721 # n = 1 user defined font
14722 #ESC V 4 n select screen mode:
14723 # n = 0 page screen mode
14724 # n = 1 virtual screen mode
14725 #ESC V 5 n control mouse mode:
14726 # n = 0 disable mouse
14727 # n = 1 enable sample mode
14728 # n = 2 send mouse information
14729 # n = 3 enable request mode
14730 #ESC W character delete
14731 #ESC X clear monitor mode (see ESC U, ESC u)
14732 #ESC Y erase page to insert char
14734 #ESC Z n send user/status line:
14735 # n = 0 send user line
14736 # n = 1 send status line
14737 # n = 2 send terminal ID
14738 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14742 # 3 = blink blank (= blank)
14744 # 5 = reverse blank
14745 # 6 = reverse blink
14746 # 7 = reverse blink blank (= reverse blank)
14748 # 9 = underline blank
14749 # : = underline blink
14750 # ; = underline blink blank
14751 # < = reverse underline
14752 # = = reverse underline blank
14753 # > = reverse underline blink
14754 # ? = reverse underline blink blank
14755 # p2, p3: f/grnd, b/grnd colour
14756 # (see ESC F for colours)
14757 # use ZZ for mono, eg.
14758 # ESC [ 0 Z Z for normal
14759 # ESC [ 4 Z Z for inverse etc.
14761 #ESC \ n set page size:
14762 # n = 1 24 lines/page
14763 # n = 2 48 lines/page
14764 # n = 3 72 lines/page
14765 # n = 4 96 lines/page
14766 #ESC ] n set Wordstar mode:
14767 # n = 0 normal (KDS7372) mode
14768 # n = 1 Wordstar mode
14770 #ESC b set foreground colour screen
14772 #ESC c n enter self-test mode:
14773 # n = 0 exit self test mode
14777 # n = 4 screen display test
14778 # n = 5 main/printer port test
14779 # n = 6 mouse port test
14780 # n = 7 graphics board test
14781 # n = 8 graphics memory test
14782 # n = 9 display all 'E'
14783 # n = : display all 'H'
14784 #ESC d set background colour screen
14786 #ESC e n program insert char (n = insert char)
14787 #ESC f text CR load user status line with 'text'
14789 #ESC g display user status line on 25th line
14790 #ESC h display system status line on 25th line
14792 #ESC j reverse linefeed
14793 #ESC k n duplex/local edit mode:
14794 # n = 0 duplex edit mode
14795 # n = 1 local edit mode
14796 #ESC l n select virtual screen:
14799 #ESC m save current config to NVRAM
14800 #ESC n p1 select display screen:
14805 #ESC o p1 p2 set characters/line and attribute:
14806 # p1 = 0 80 chars/line
14808 #ESC o p1 p2 set characters/line and attribute:
14809 # p1 = 0 80 chars/line
14810 # p1 = 1 132 chars/line
14811 # p2 = 0 single width single height
14812 # p2 = 1 single width double height
14813 # p2 = 2 double width single height
14814 # p2 = 3 double width double height
14816 #ESC q insert mode on
14817 #ESC r edit mode on
14818 #ESC s send message all
14819 #ESC t erase line to null
14820 #ESC u clear monitor mode (see ESC U, ESC X)
14821 #ESC v autopage mode on
14822 #ESC w autopage mode off
14823 #ESC x p1 p2 p3 define delimiter code...
14824 #ESC y erase page to null
14826 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14827 # p1 = starting row
14828 # p2 = starting column
14832 #ESC { p1 p2 p3 p4 configure main port
14833 # (baud, stop bits, parity, word length)
14835 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14836 # p1 = function key code:
14837 # '1' - ';' normal f1- f11
14838 # '<' - 'F' shifted f1 - f11
14839 # p2 = program mode:
14843 # Ctrl-Y = terminator
14844 # (use Ctrl-P to escape ^P, ^Y )
14846 #ESC } p1 p2 p3 p4 configure printer port
14847 # (baud, stop bits, parity, word length)
14848 #ESC ~ send system status
14850 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14852 # Entry is by esr going solely on above information and is UNTESTED.
14853 # This actually looks a lot like a Televideo 9xx.
14854 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14855 # to make color work without a test terminal. The <am> capability is a guess.
14856 # The initialization string sets conversation mode, blinking underline cursor,
14857 # full duplex, parallel attribute mode, display user status line, white
14858 # foreground, black background, normal highlight.
14860 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14863 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14865 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14866 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14867 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14868 hts=\E1, il1=\EE, invis=\E[1ZZ,
14869 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14870 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14871 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14872 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
14873 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14874 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14875 rs2=\Eo1, use=icl6404,
14877 #### Interactive Systems Corp
14879 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14880 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14881 # bought out by Sun.
14884 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14885 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14886 # ":le=^_:" later overridden -- esr)
14887 intext|Interactive Systems Corporation modified owl 1200,
14889 cols#80, it#8, lines#24, xmc#1,
14890 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14891 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14892 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14893 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14894 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14895 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14896 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14897 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14899 intext2|intextii|INTERACTIVE modified owl 1251,
14901 cols#80, lines#24, xmc#0,
14902 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
14903 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14904 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14905 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14906 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14907 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14908 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14909 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14910 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14911 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14912 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14915 #### Kimtron (abm, kt)
14917 # Kimtron seems to be history, but as March 1998 these people are still
14918 # offering repair services for Kimtron equipment:
14920 # Com/Pair Monitor Service
14921 # 1105 N. Cliff Ave.
14922 # Sioux Falls, South Dakota 57103
14924 # WATS voice: 1-800/398-4946
14925 # POTS fax: +1 605/338-8709
14926 # POTS voice: +1 605/338-9650
14927 # Email: <compair@sd.cybernex.net>
14928 # Internet/Web: <http://www.com-pair.com>
14930 # Kimtron entries include (undocumented) codes for: enter dim mode,
14931 # enter bold mode, enter reverse mode, turn off all attributes.
14934 # Kimtron ABM 85 added by Dual Systems
14935 # (abm85: removed duplicated ":kd=^J:" -- esr)
14936 abm85|Kimtron ABM 85,
14937 OTbs, am, bw, msgr,
14938 cols#80, it#8, lines#24, xmc#1,
14939 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14940 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14941 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14942 if=/usr/share/tabset/stdcrt, il1=\EE,
14943 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14944 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14945 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14946 # Kimtron ABM 85H added by Dual Systems.
14947 # Some notes about the abm85h entries:
14948 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14949 # firmware revs prior to SP51
14950 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14951 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14952 # in some places and NOT software settable i.e., <is2> can't fix it)
14953 # 3) In 85h mode, the arrow keys and special functions transmit when
14954 # the terminal is in dup-edit, and work only locally in local-edit.
14955 # Vi won't swallow `del char' for instance, but <smcup> turns on
14956 # dup-edit anyway so that the arrow keys will work right. If the
14957 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14958 # <is2>. Note that 920E mode does not have software commands to toggle
14959 # between dup and local edit, so you get whatever was set last on the
14961 # 4) <flash> attribute is nice, but seems too slow to work correctly
14963 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14964 # are selected, the <xmc@> entry should be removed.
14965 # 6) auto new-line should be on (selectable from setup mode only)
14967 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14968 abm85h|Kimtron ABM 85H native mode,
14971 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14973 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14974 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14976 abm85e|Kimtron ABM 85H in 920E mode,
14978 bel=^G, dim=\E), flash@,
14979 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14980 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14981 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14984 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14985 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14986 # From: <malman@bbn-vax.arpa>
14987 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14988 kt7|kimtron model kt-7,
14990 cols#80, it#8, lines#24,
14991 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14992 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14993 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14994 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14995 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14996 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14997 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14998 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14999 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
15000 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
15001 # other kt7 entry and the adjacent key capabilities). Removed EE which is
15002 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
15003 # but we can't figure out what.
15004 kt7ix|kimtron model kt-7 or 70 in IX mode,
15006 cols#80, it#8, lines#25,
15007 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
15008 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
15009 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15010 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
15011 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
15012 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
15013 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
15014 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15015 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15016 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
15017 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
15018 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
15020 #### Microdata/MDIS
15022 # This was a line of terminals made by McDonnell-Douglas Information Systems.
15023 # These entries come direct from MDIS documentation. I have edited them only
15024 # to move primary names of the form p[0-9] * to aliases, and to comment out
15025 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
15026 # also removed the change history; the last version indicates this is
15027 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
15030 # McDonnell Information Systems Terminal Family History
15031 # =========================================
15033 # Prism-1, Prism-2 and P99:
15034 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
15036 # Prism-4 and Prism-5:
15037 # Slightly less ancient range of Microdata terminals. Follow-on from
15038 # Prism-2, but with many enhancements. P5 has eight display pages.
15041 # A special terminal for use with library systems, primarily in Germany.
15042 # Limited numbers. Similar functionality to P5 (except attributes?).
15044 # Prism-7, Prism-8 and Prism-9:
15045 # More recent range of MDIS terminals, in which P7 and P8
15046 # replace the P4 & P5, with added functionality, and P9 is the flagship.
15047 # The P9 has two emulation modes - P8 and ANSI - and includes a
15048 # large number of the DEC VT220 control sequences. Both
15049 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
15051 # Prism-12 and Prism-14:
15052 # Latest range, functionally very similar to the P9. The P14 has a
15053 # black-on-white overscanning screen.
15055 # The terminfo definitions given here are:
15057 # p2 - Prism-2 (or Prism-1 or P99).
15059 # p4 - Prism-4 (and older P7s & P8s).
15060 # p5 - Prism-5 (or Prism-6).
15063 # p8 - Prism-8 (in national or multinational mode).
15064 # p8-w - 132 column version of p8.
15065 # p9 - Prism-9 in ANSI mode.
15066 # p9-w - 132 column version of p9.
15067 # p9-8 - Prism-9 in Prism-8 emulation mode.
15068 # p9-8-w - As p9-8, but with 132 columns.
15070 # p12 - Prism-12 in ANSI mode.
15071 # p12-w - 132 column version of p12.
15072 # p12-m - Prism-12 in MDC emulation mode.
15073 # p12-m-w - As p12-m, but with 132 columns.
15074 # p14 - Prism-14 in ANSI mode.
15075 # p14-w - 132 column version of p14.
15076 # p14-m - Prism-14 in MDC emulation mode.
15077 # p14-m-w - As p14-m, but with 132 columns.
15082 # Includes Prism-1 and basic P99 without SP or MP loaded.
15083 # The simplest form of Prism-type terminal.
15084 # Basic cursor movement and clearing operations only.
15085 # No video attributes.
15087 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15088 # value up, followed by backspace.
15090 prism2|MDC Prism-2,
15093 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15094 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15095 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
15096 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15097 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
15102 # Includes early versions of P7 & P8.
15103 # Basic family definition for most Prisms (except P2 and P9 ANSI).
15105 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
15106 # value up, followed by backspace.
15107 # Cursor key definitions removed because they interfere with vi and csh keys.
15109 prism4|p4|P4|MDC Prism-4,
15110 am, bw, hs, mc5i, msgr,
15111 cols#80, lines#24, wsl#72, xmc#1,
15112 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
15113 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15114 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15115 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
15116 fsl=^]\345, home=^A,
15117 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
15118 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
15119 rev=^CD, rmso=^C\s, rmul=^C\s,
15120 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
15121 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
15122 vpa=\013%p1%{32}%+%c,
15127 # Same definition as p4. Includes Prism-6 (not tested!).
15128 # Does not use any multi-page features.
15130 prism5|p5|P5|MDC Prism-5,
15136 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
15138 # Use p4 for very early models of P7.
15139 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15141 prism7|p7|P7|MDC Prism-7,
15142 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
15147 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
15148 # Supports national and multinational character sets.
15150 # Alternate char set operations only work in multinational mode.
15151 # Use p4 for very early models of P8.
15152 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15153 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15155 prism8|p8|P8|MDC Prism-8,
15156 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
15157 vpa=\E[%i%p1%dd, use=p4,
15159 # p8-w: Prism-8 in 132 column mode
15160 # --------------------------------
15162 # 'Wide' version of p8.
15164 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
15166 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
15168 is2=\E[<12h\E[<14h, use=p8,
15170 # p9: Prism-9 in ANSI mode
15171 # -------------------------
15173 # The "flagship" model of this generation of terminals.
15174 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
15176 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
15177 # Fixes to deal with terminal firmware bugs:
15178 # . 'ri' uses insert-line since rev index doesn't always
15179 # . 'sgr0' has extra '0' since esc[m fails
15180 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
15181 # Not covered in the current definition:
15183 # . Programming Fn keys
15184 # . Graphic characters (defaults correctly to vt100)
15185 # . Padding values (sets xon)
15186 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
15188 prism9|p9|P9|MDC Prism-9 in ANSII mode,
15189 am, bw, hs, msgr, xenl, xon,
15190 cols#80, it#8, lines#24, vt#3, wsl#72,
15191 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
15192 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
15193 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15194 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15195 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15196 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
15197 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
15198 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
15199 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
15200 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
15201 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
15202 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
15203 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
15204 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
15205 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
15206 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
15207 rmso=\E[27m, rmul=\E[24m,
15208 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
15210 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
15211 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15212 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
15215 # p9-w: Prism-9 in 132 column mode
15216 # --------------------------------
15218 # 'Wide' version of p9.
15220 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
15222 is2=\E[&p\E[<12l\E F\E[<14h,
15223 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
15225 # p9-8: Prism-9 in P8 mode
15226 # ------------------------
15228 # P9 terminal in P8 emulation mode.
15229 # Similar to p8 definition.
15230 # Insertion and deletion operations possible.
15232 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
15233 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15234 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
15236 # p9-8-w: Prism-9 in P8 and 132 column modes
15237 # ------------------------------------------
15239 # P9 terminal in P8 emulation mode and 132 column mode.
15241 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
15242 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15243 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
15245 # p12: Prism-12 in ANSI mode
15246 # ---------------------------
15248 # See p9 definition.
15250 prism12|p12|P12|MDC Prism-12 in ANSI mode,
15253 # p12-w: Prism-12 in 132 column mode
15254 # ----------------------------------
15256 # 'Wide' version of p12.
15258 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
15261 # p12-m: Prism-12 in MDC emulation mode
15262 # -------------------------------------
15264 # P12 terminal in MDC emulation mode.
15265 # Similar to p8 definition.
15266 # Insertion and deletion operations possible.
15268 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
15271 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
15272 # -------------------------------------------------------
15274 # P12 terminal in MDC emulation mode and 132 column mode.
15276 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
15279 # p14: Prism-14 in ANSII mode
15280 # ---------------------------
15282 # See p9 definition.
15284 prism14|p14|P14|MDC Prism-14 in ANSII mode,
15287 # p14-w: Prism-14 in 132 column mode
15288 # ----------------------------------
15290 # 'Wide' version of p14.
15292 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
15295 # p14-m: Prism-14 in MDC emulation mode
15296 # -------------------------------------
15298 # P14 terminal in MDC emulation mode.
15299 # Similar to p8 definition.
15300 # Insertion and deletion operations possible.
15302 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
15305 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
15306 # -------------------------------------------------------
15308 # P14 terminal in MDC emulation mode and 132 column mode.
15310 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
15313 # End of McDonnell Information Systems Prism definitions
15315 # These things were popular in the Pick database community at one time
15316 # From: George Land <georgeland@aol.com> 24 Sep 1996
15317 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
15319 cols#80, lines#24, ma#1, wsl#78, xmc#1,
15320 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
15321 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
15322 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
15323 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
15324 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
15325 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
15326 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15327 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
15328 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
15329 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
15332 #### Microterm (act, mime)
15334 # The mime1 entries refer to the Microterm Mime I or Mime II.
15335 # The default mime is assumed to be in enhanced act iv mode.
15338 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
15339 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
15340 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
15341 # since Sytek insists ^S means xoff.
15342 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
15343 act4|microterm|microterm act iv,
15346 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
15347 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
15348 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
15349 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
15350 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
15352 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
15353 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
15354 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
15355 act5|microterm5|microterm act v,
15356 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
15358 # Mimes using brightness for standout. Half bright is really dim unless
15359 # you turn up the brightness so far that lines show up on the screen.
15360 mime-fb|full bright mime1,
15361 is2=^S\E, rmso=^S, smso=^Y, use=mime,
15362 mime-hb|half bright mime1,
15363 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
15364 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
15365 # the more plausible ":do=^J:" -- esr)
15366 # uc was at one time disabled to get around a curses bug, be wary of it
15367 mime|mime1|mime2|mimei|mimeii|microterm mime1,
15369 cols#80, it#8, lines#24, vt#9,
15370 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
15371 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
15372 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
15373 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
15374 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
15375 # These termcaps (for mime2a) put the terminal in low intensity mode
15376 # since high intensity mode is so obnoxious.
15377 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
15380 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15381 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
15382 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
15383 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
15384 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
15385 smir=\EE, smso=\E\:, smul=\E6,
15386 # This is the preferred mode (but ^X can't be used as a kill character)
15387 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
15389 cols#80, it#8, lines#24,
15390 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15391 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
15392 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
15393 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
15394 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
15395 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
15396 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
15397 mime3a|mime1 emulating 3a,
15399 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
15400 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
15402 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
15404 # Wed Mar 9 18:53:21 1983
15405 # We run our terminals at 2400 baud, so there might be some timing problems at
15406 # higher speeds. The major improvements in this model are the terminal now
15407 # scrolls down and insert mode works without redrawing the rest of the line
15408 # to the right of the cursor. This is done with a bit of a kludge using the
15409 # exit graphics mode to get out of insert, but it does not appear to hurt
15410 # anything when using vi at least. If you have some users using act4s with
15411 # programs that use curses and graphics mode this could be a problem.
15412 mime314|mm314|mime 314,
15415 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
15416 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
15417 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
15418 # Microterm mime 340 from University of Wisconsin
15419 mm340|mime340|mime 340,
15421 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
15422 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15423 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
15424 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
15425 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
15426 # This came from University of Wisconsin marked "astro termcap for jooss".
15427 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
15428 # also added <rmam>/<smam> based on the init string -- esr)
15429 mt4520-rv|micro-term 4520 reverse video,
15430 am, hs, msgr, xenl, xon,
15431 cols#80, it#8, lines#24, wsl#80,
15432 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
15433 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
15434 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15435 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15436 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15437 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
15438 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
15439 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
15440 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
15441 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15442 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
15443 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
15444 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
15445 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
15446 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
15447 tbc=\E[g, tsl=\E[25;1H,
15449 # Fri Aug 5 08:11:57 1983
15450 # This entry works for the ergo 4000 with the following setups:
15451 # ansi,wraparound,newline disabled, xon/xoff disabled in both
15454 # WARNING!!! There are multiple versions of ERGO 4000 microcode
15455 # Be advised that very early versions DO NOT WORK RIGHT !!
15456 # Microterm does have a ROM exchange program- use it or lose big
15457 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
15458 ergo4000|microterm ergo 4000,
15461 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
15462 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15463 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
15464 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
15465 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
15466 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15467 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
15468 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
15469 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
15470 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
15475 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
15476 # For what happened to that group, see the ADDS section.
15478 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
15481 # The following vendor-supplied termcaps were captured from the Boundless
15482 # Technologies site, 8 March 1998. I removed all-upper-case names that were
15483 # identical, except for case, to lower-case ones. I also uncommented the acsc
15486 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15487 # DEC vt200/300 with color capabilities added.
15488 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15489 colors#8, pairs#64,
15490 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15492 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15493 # DEC vt200/300 with color capabilities added.
15494 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
15495 colors#8, pairs#64,
15496 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15497 use=ncr260vt300wan,
15498 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
15499 # DEC vt200/300 with color capabilities added.
15500 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
15501 colors#8, pairs#64,
15502 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15504 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
15505 # DEC vt200/300 with color capabilities added.
15506 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
15507 colors#8, pairs#64,
15508 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
15509 use=ncr260vt300wpp,
15510 # This definition for ViewPoint supports several attributes. This means
15511 # that it has magic cookies (extra spaces where the attributes begin).
15512 # Some applications do not function well with magic cookies. The System
15513 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15514 # If supporting various attributes is not vital, 'xmc#1' and the extra
15515 # attributes can be removed.
15516 # Mapping to ASCII character set ('acsc' capability) can also be
15517 # restored if needed.
15518 ncr260vppp|NCR 2900_260 viewpoint,
15519 am, bw, hs, km, mc5i, mir, msgr, xon,
15520 cols#80, lines#24, nlab#32, xmc#1,
15521 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15522 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
15523 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
15524 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
15525 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
15526 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
15527 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
15528 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15529 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
15530 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
15531 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
15532 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
15533 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
15534 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
15535 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
15536 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
15537 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
15538 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
15539 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
15540 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
15541 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
15542 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15543 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15544 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
15545 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
15546 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
15548 cup=\Ea%i%p1%dR%p2%dC$<30>,
15549 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15550 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
15552 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
15553 am, hs, mir, msgr, xenl, xon,
15554 cols#80, lines#24, nlab#32,
15555 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15556 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15557 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15558 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
15559 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15560 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15561 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15562 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15563 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15564 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
15565 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
15566 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
15567 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
15569 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15570 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15571 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
15572 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
15573 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
15574 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
15575 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15577 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15578 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
15579 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
15580 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
15581 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
15583 cup=\E[%i%p1%d;%p2%dH$<30>,
15584 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15585 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15587 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
15588 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15589 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15590 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15591 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
15592 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
15593 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15594 smkx=\E=, use=ncr260vt100an,
15595 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
15597 cup=\E[%i%p1%d;%p2%dH$<30>,
15598 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15599 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15601 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
15602 am, hs, mir, msgr, xenl, xon,
15603 cols#80, lines#24, nlab#32,
15604 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15605 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15606 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15607 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15608 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15609 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15610 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15611 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15612 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15613 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15614 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15615 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15616 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15617 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15618 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15619 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15620 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15621 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15622 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
15623 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
15624 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
15625 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15626 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15627 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15628 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15629 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15630 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15631 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15632 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15634 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15635 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15636 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15637 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15639 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15641 cup=\E[%i%p1%d;%p2%dH$<30>,
15642 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15643 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15645 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15646 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15647 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15648 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15649 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15651 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15653 cup=\E[%i%p1%d;%p2%dH$<30>,
15654 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15655 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15657 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15658 am, hs, mir, msgr, xenl, xon,
15659 cols#80, lines#24, nlab#32,
15660 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15661 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15662 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15663 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15664 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15665 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15666 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15667 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15668 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15669 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15670 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15671 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15672 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15673 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15674 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15675 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15676 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15677 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15678 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15679 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15680 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15681 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15682 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15683 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15684 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15685 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15686 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15688 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15690 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
15691 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15692 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15693 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15695 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15697 cup=\E[%i%p1%d;%p2%dH$<30>,
15698 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15699 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15701 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15702 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15703 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15704 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15705 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15707 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15709 cup=\E[%i%p1%d;%p2%dH$<30>,
15710 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15711 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15713 # This terminfo file contains color capabilities for the Wyse325 emulation of
15714 # the NCR 2900/260C color terminal. Because of the structure of the command
15715 # (escape sequence) used to set color attributes, one of the fore/background
15716 # colors must be preset to a given value. I have set the background color to
15717 # black. The user can change this setup by altering the last section of the
15718 # 'setf' definition. The escape sequence to set color attributes is
15719 # ESC d y <foreground_color> <background_color> 1
15720 # In addition, the background color can be changed through the desk accessories.
15721 # The capablitiy 'op' sets colors to green on black (default combination).
15723 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15724 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15725 # capability and recompile if you wish to have it included.
15727 ncr260wy325pp|NCR 2900_260 wyse 325,
15728 am, bw, hs, km, mc5i, mir, msgr, xon,
15729 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15730 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15731 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15732 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15733 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15734 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15735 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15736 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15737 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15738 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15739 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15740 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15741 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15742 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15743 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15744 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15745 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15746 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15747 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15748 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15749 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15750 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15751 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15752 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15754 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15755 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15756 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15758 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15760 cup=\Ea%i%p1%dR%p2%dC$<30>,
15761 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15762 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15764 # This definition for Wyse 350 supports several attributes. This means
15765 # that it has magic cookies (extra spaces where the attributes begin).
15766 # Some applications do not function well with magic cookies. The System
15767 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15768 # If supporting various attributes is not vital, 'xmc#1' and the extra
15769 # attributes can be removed.
15770 # Mapping to ASCII character set ('acsc' capability) can also be
15771 # restored if needed.
15772 # In addition, color capabilities have been added to this file. The drawback,
15773 # however, is that the background color has to be black. The foreground colors
15774 # are numbered 0 through 15.
15776 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15777 # with the 'pairs' capability defined as below. If you wish to
15778 # have it included, Un-comment it and recompile (using 'tic').
15780 ncr260wy350pp|NCR 2900_260 wyse 350,
15781 am, bw, hs, km, mc5i, mir, msgr, xon,
15782 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15783 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15784 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15785 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15786 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15787 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15788 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15789 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15790 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15791 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15792 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15793 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15794 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15795 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15796 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15797 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15798 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15799 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15800 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15801 mc0=\EP$<10>, mc4=^T, mc5=^R,
15802 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15803 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15804 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15805 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15807 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15808 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15809 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15811 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15813 cup=\Ea%i%p1%dR%p2%dC$<30>,
15814 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15815 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15817 # This definition for Wyse 50+ supports several attributes. This means
15818 # that it has magic cookies (extra spaces where the attributes begin).
15819 # Some applications do not function well with magic cookies. The System
15820 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15821 # If supporting various attributes is not vital, 'xmc#1' and the extra
15822 # attributes can be removed.
15823 # Mapping to ASCII character set ('acsc' capability) can also be
15824 # restored if needed.
15825 # (ncr260wy50+pp: originally contained commented-out
15826 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15827 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15828 am, bw, hs, km, mc5i, mir, msgr, xon,
15829 cols#80, lines#24, nlab#32, xmc#1,
15830 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15831 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15832 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15833 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15834 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15835 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15836 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15838 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15839 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15840 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15841 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15842 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15843 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15844 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15845 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15846 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15847 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15848 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15849 mc0=\EP$<10>, mc4=^T, mc5=^R,
15850 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15851 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15852 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15853 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15854 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15855 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15856 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15858 cup=\Ea%i%p1%dR%p2%dC$<30>,
15859 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15860 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15862 ncr260wy60pp|NCR 2900_260 wyse 60,
15863 am, bw, hs, km, mc5i, mir, msgr, xon,
15864 cols#80, lines#24, nlab#32,
15865 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15866 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15867 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15868 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15869 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15870 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15871 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15873 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15874 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15875 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15876 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15877 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15878 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15879 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15880 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15881 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15882 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15883 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15884 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15885 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15886 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15887 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15888 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15889 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15890 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15892 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15894 cup=\Ea%i%p1%dR%p2%dC$<30>,
15895 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15896 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15898 ncr160vppp|NCR 2900_160 viewpoint,
15900 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15902 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15904 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15906 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15907 use=ncr260vt100wan,
15908 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15909 use=ncr260vt100wpp,
15910 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15912 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15914 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15915 use=ncr260vt200wan,
15916 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15917 use=ncr260vt200wpp,
15918 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15920 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15922 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15923 use=ncr260vt300wan,
15924 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15925 use=ncr260vt300wpp,
15926 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15928 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15929 use=ncr260wy50+wpp,
15930 ncr160wy60pp|NCR 2900_160 wyse 60,
15932 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15934 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15935 am, hs, mc5i, mir, msgr, xon,
15936 cols#80, it#8, lines#24, nlab#32,
15937 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15938 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15939 clear=\E[2J\E[1;1H$<300>, cr=^M,
15940 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15941 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15942 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15943 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15944 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15945 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15946 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15947 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15948 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15950 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15951 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15952 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15953 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15954 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15955 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15956 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15958 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15959 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15960 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15962 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15964 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15965 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15968 # Vendor-supplied NCR termcaps end here
15970 # NCR7900 DIP switches:
15974 # 5 - Parity (Odd/Even)
15975 # 6 - Don't Send or Do Send Spaces
15976 # 7 - Parity Enable
15977 # 8 - Stop Bits (One/Two)
15980 # 1 - Upper/Lower Shift
15981 # 2 - Typewriter Shift
15982 # 3 - Half Duplex / Full Duplex
15983 # 4 - Light/Dark Background
15984 # 5-6 - Carriage Return Without / With Line Feed
15985 # 7 - Extended Mode
15986 # 8 - Suppress Keyboard Display
15989 # 1 - End of line entry disabled/enabled
15990 # 2 - Conversational mode / (Local?) Mode
15991 # 3 - Control characters displayed / not displayed
15992 # 4 - (2-wire?) / 4-wire communications
15993 # 5 - RTS on and off for each character
15994 # 6 - (50Hz?) / 60 Hz
15995 # 7 - Exit after level zero diagnostics
15996 # 8 - RS-232 interface
15999 # 1 - Reverse Channel (yes / no)
16000 # 2 - Manual answer (no / yes)
16001 # 3-4 - Cursor appearance
16002 # 5 - Communication Rate
16003 # 6 - Enable / Disable EXT turnoff
16004 # 7 - Enable / Disable CR turnoff
16005 # 8 - Enable / Disable backspace
16007 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
16008 # reverse, blink, dim, and underline) the appropriate number of bits (by
16009 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
16010 # '@' is (effectively) "or"ed with each attribute to generate the proper third
16011 # character in the <ESC>0 sequence. The <sgr> string implements the following
16014 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
16015 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
16017 # Where: P1 <==> Standout attribute parameter
16018 # P2 <==> Underline attribute parameter
16019 # P3 <==> Reverse attribute parameter
16020 # P4 <==> Blink attribute parameter
16021 # P5 <==> Dim attribute parameter
16022 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
16023 ncr7900i|ncr7900|ncr 7900 model 1,
16025 cols#80, lines#24, xmc#1,
16026 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16027 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
16028 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
16029 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
16031 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
16032 sgr0=\E0@, smso=\E0Q, smul=\E0`,
16033 ncr7900iv|ncr 7900 model 4,
16036 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
16037 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
16038 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
16039 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
16040 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
16041 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
16042 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
16043 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
16044 # The user can enter a CTRL-B to get out of this locked state.
16045 # In <hpa>, we want to output the character given by the formula:
16046 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
16047 ncr7901|ncr 7901 model,
16050 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
16051 cub1=^H, cud1=^J, cuf1=^F,
16052 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
16054 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
16055 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
16056 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
16057 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
16058 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
16059 vpa=\013%p1%{64}%+%c,
16061 # Newbury Data Recording Limited (Newbury Data)
16063 # Have been manufacturing and reselling various peripherals for a long time
16064 # They don't make terminals anymore, but are still in business (in 2007).
16065 # Their e-mail address is at ndsales@newburydata.co.uk
16066 # and their post address is:
16068 # Newbury Data Recording Ltd,
16069 # Premier Park, Road One,
16070 # Winsford, Cheshire, CW7 3PT
16072 # Their technical support is still good, they sent me for free a printed copy
16073 # of the 9500 user manual and I got it just 1 week after I first contacted them
16077 # Manufactured in the early/mid eighties, behaves almost the same as a
16078 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
16079 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
16080 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
16081 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
16082 # recognized: if you type in "ESC !", the next (third) character is not
16083 # echoed, showing that the terminal was actually waiting for a parameter!
16084 ndr9500|nd9500|Newbury Data 9500,
16085 am, bw, hs, mc5i, mir, msgr, ul, xon,
16086 cols#80, lines#24, wsl#79,
16087 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
16088 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
16089 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16090 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
16091 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
16092 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
16093 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
16094 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
16095 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16096 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
16097 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
16098 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16099 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16100 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
16101 pfloc=\E|%{48}%p1%+%c2%p2\031,
16102 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
16103 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
16104 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
16105 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
16106 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
16108 ndr9500-nl|NDR 9500 with no status line,
16111 dsl@, fsl@, tsl@, use=ndr9500,
16113 ndr9500-25|NDR 9500 with 25th line enabled,
16114 lines#25, use=ndr9500,
16116 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
16117 lines#25, use=ndr9500-nl,
16119 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
16122 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
16123 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
16124 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
16126 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
16127 lines#25, use=ndr9500-mc,
16129 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
16132 dsl@, fsl@, tsl@, use=ndr9500-mc,
16134 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
16135 lines#25, use=ndr9500-mc-nl,
16137 #### Perkin-Elmer (Owl)
16139 # These are official terminfo entries from within Perkin-Elmer.
16142 bantam|pe550|pe6100|perkin elmer 550,
16145 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16146 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16147 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
16148 fox|pe1100|perkin elmer 1100,
16151 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16152 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16153 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
16154 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
16155 owl|pe1200|perkin elmer 1200,
16158 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
16159 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16160 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
16161 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
16162 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
16163 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
16164 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
16165 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
16166 pe1251|pe6300|pe6312|perkin elmer 1251,
16168 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
16169 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
16170 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
16171 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
16172 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
16173 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
16174 # (pe7000m: this had
16175 # rmul=\E!\0, smul=\E!\040,
16176 # which is probably wrong, it collides with kf0
16177 pe7000m|perkin elmer 7000 series monochrome monitor,
16180 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
16181 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16182 ed=\EJ, el=\EI, home=\EH, ind=^J,
16183 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
16184 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
16185 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
16186 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
16188 pe7000c|perkin elmer 7000 series colour monitor,
16189 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
16190 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
16194 # Sperry Univac has merged with Burroughs to form Unisys.
16197 # This entry is for the Sperry UTS30 terminal running the TTY
16198 # utility under control of CP/M Plus 1R1. The functionality
16199 # provided is comparable to the DEC vt100.
16200 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
16201 uts30|sperry uts30 with cp/m@1R1,
16203 cols#80, lines#24, wsl#40,
16204 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16205 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
16206 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
16207 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
16208 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16209 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
16210 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
16211 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
16212 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
16213 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
16214 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
16215 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
16216 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16217 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
16218 smul=\E[4m, tsl=\E], uc=\EPB,
16222 # Tandem builds these things for use with its line of fault-tolerant
16223 # transaction-processing computers. They aren't generally available
16224 # on the merchant market, and so are fairly uncommon.
16227 tandem6510|adm3a repackaged by Tandem,
16230 # A funny series of terminal that TANDEM uses. The actual model numbers
16231 # have a fourth digit after 653 that designates minor variants. These are
16232 # natively block-mode and rather ugly, but they have a character mode which
16233 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
16234 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
16235 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
16236 tandem653|t653x|Tandem 653x multipage terminal,
16237 OTbs, am, da, db, hs,
16238 cols#80, lines#24, wsl#64, xmc#1,
16239 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
16240 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
16241 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
16242 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
16244 #### Tandy/Radio Shack
16246 # Tandy has a line of VDTs distinct from its microcomputers.
16249 dmterm|deskmate terminal,
16252 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
16253 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16254 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
16255 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
16256 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
16257 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
16258 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
16259 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
16261 dt100|dt-100|Tandy DT-100 terminal,
16263 cols#80, lines#24, xmc#1,
16264 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16265 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16266 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16267 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16268 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16269 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
16270 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
16271 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
16272 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
16273 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
16274 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
16275 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
16276 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
16277 cols#132, use=dt100,
16278 dt110|Tandy DT-110 emulating ansi,
16281 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
16282 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
16283 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
16284 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
16285 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
16286 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
16287 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
16288 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
16289 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
16290 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
16291 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
16292 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16293 smacs=^N, smso=\E[7m, smul=\E[4m,
16294 pt210|TRS-80 PT-210 printing terminal,
16297 bel=^G, cr=^M, cud1=^J, ind=^J,
16299 #### Tektronix (tek)
16301 # Tektronix tubes are graphics terminals. Most of them use modified
16302 # oscilloscope technology incorporating a long-persistence green phosphor,
16303 # and support vector graphics on a main screen with an attached "dialogue
16304 # area" for interactive text.
16307 tek|tek4012|tektronix 4012,
16310 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
16311 ff=\014$<1000>, is2=\E^O,
16312 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16313 tek4013|tektronix 4013,
16314 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
16315 tek4014|tektronix 4014,
16317 is2=\E\017\E9, use=tek4012,
16318 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16319 tek4015|tektronix 4015,
16320 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
16321 tek4014-sm|tektronix 4014 in small font,
16322 cols#121, lines#58,
16323 is2=\E\017\E\:, use=tek4014,
16324 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16325 tek4015-sm|tektronix 4015 in small font,
16326 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
16327 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
16329 # You need to have "stty nl2" in effect. Some versions of tset(1) know
16330 # how to set it for you.
16332 # It's got the Magic Cookie problem around stand-out mode. If you can't
16333 # live with Magic Cookie, remove the :so: and :se: fields and do without
16334 # reverse video. If you like reverse video stand-out mode but don't want
16335 # it to flash, change the letter 'H' to 'P' in the :so: field.
16336 tek4023|tektronix 4023,
16338 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
16339 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
16340 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
16341 rmso=^_@, smso=^_P,
16342 # It is recommended that you run the 4025 at 4800 baud or less;
16343 # various bugs in the terminal appear at 9600. It wedges at the
16344 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
16345 # on keyboard don't work. You have to hit BREAK twice to get
16346 # one break at any speed - this is a documented feature.
16347 # Can't use cursor motion because it's memory relative, and
16348 # because it only works in the workspace, not the monitor.
16349 # Same for home. Likewise, standout only works in the workspace.
16351 # <el> was commented out since vi and rogue seem to work better
16352 # simulating it with lots of spaces!
16354 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
16355 # and didn't seem necessary.
16357 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
16359 cols#80, it#8, lines#34, lm#0,
16360 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
16361 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
16362 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
16363 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
16364 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
16365 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
16366 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
16368 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16369 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
16370 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
16371 tek4025-17|tek 4025 17 line window,
16372 lines#17, use=tek4025,
16373 tek4025-17-ws|tek 4025 17 line window in workspace,
16374 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
16375 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
16376 smso=\037att e\r, use=tek4025-17,
16377 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
16378 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
16379 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16381 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
16382 # The following status modes are assumed for normal operation (replace the
16383 # initial "!" by whatever the current command character is):
16384 # !COM 29 # NOTE: changes command character to GS (^])
16390 # ^]STO 9 17 25 33 41 49 57 65 73
16391 # Other modes may be set according to communication requirements.
16392 # If the command character is inadvertently changed, termcap can't restore it.
16393 # Insert-character cannot be made to work on both top and bottom rows.
16394 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
16395 # There also seems to be a problem with vertical motion, perhaps involving
16396 # delete/insert-line, following a typed carriage return. This terminal sucks.
16397 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16398 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
16399 # work any more. -- esr)
16400 tek4025a|Tektronix 4025A,
16401 OTbs, OTpt, am, bw, da, db, xon,
16402 cols#80, it#8, lines#34,
16403 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
16404 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
16405 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
16406 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
16407 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
16408 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
16409 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
16410 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
16412 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
16413 # Here's the command file that I use to get rogue to work on the 4025.
16414 # It should work with any program using the old curses (e.g. it better
16415 # not try to scroll, or cursor addressing won't work. Also, you can't
16417 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
16418 tek4025-cr|tek 4025 for curses and rogue,
16420 cols#80, it#8, lines#33,
16421 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
16422 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
16423 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
16424 rmcup=\037wor 0, smcup=\037wor 33h,
16425 # next two lines commented out since curses only allows 128 chars, sigh.
16426 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
16427 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
16428 tek4025ex|4025ex|4027ex|tek 4025 w/!,
16429 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
16430 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
16431 tek4105|tektronix 4105,
16432 OTbs, am, mir, msgr, ul, xenl, xt,
16433 cols#79, it#8, lines#29,
16434 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
16435 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
16436 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
16437 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16438 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
16439 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
16440 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
16441 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
16442 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
16443 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16444 smul=\E[=5;<2m, tbc=\E[1g,
16446 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
16447 tek4105-30|4015 emulating 30 line vt100,
16448 am, mir, msgr, xenl, xon,
16449 cols#80, it#8, lines#30, vt#3,
16450 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16451 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
16452 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16453 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16454 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16455 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16456 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
16457 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
16458 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16459 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16460 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
16461 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16462 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
16463 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
16464 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
16467 # Tektronix 4105 from BRL
16468 # The following setup modes are assumed for normal operation:
16469 # CODE ansi CRLF no DABUFFER 141
16470 # DAENABLE yes DALINES 30 DAMODE replace
16471 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
16472 # FLAGGING input INSERTREPLACE replace LFCR no
16473 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
16474 # SELECTCHARSET G1 0 TABS -2
16475 # Other setup modes may be set for operator convenience or communication
16476 # requirements; I recommend
16477 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16478 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16479 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16480 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
16481 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16482 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
16484 # and factory color maps. After setting these modes, save them with NVSAVE. No
16485 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16486 # "IC" cannot be used in combination with "im" & "ei".
16487 # "tek4105a" is just a guess:
16488 tek4105a|Tektronix 4105,
16489 OTbs, OTpt, msgr, xon,
16490 OTkn#8, cols#80, it#8, lines#30, vt#3,
16491 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16492 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16493 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16494 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16495 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16496 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16497 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16498 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16499 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16500 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16501 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16502 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16503 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16504 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16505 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16506 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16507 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16508 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16511 # Tektronix 4106/4107/4109 from BRL
16512 # The following setup modes are assumed for normal operation:
16513 # CODE ansi COLUMNMODE 80 CRLF no
16514 # DABUFFER 141 DAENABLE yes DALINES 32
16515 # DAMODE replace DAVISIBILITY yes ECHO no
16516 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
16517 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
16518 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
16520 # Other setup modes may be set for operator convenience or communication
16521 # requirements; I recommend
16522 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
16523 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
16524 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
16525 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
16526 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
16527 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
16529 # and factory color maps. After setting these modes, save them with NVSAVE. No
16530 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
16531 # "IC" cannot be used in combination with "im" & "ei".
16532 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
16534 cols#80, it#8, lines#32, vt#3,
16535 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
16536 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
16537 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16538 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16539 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16540 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
16541 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16542 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16543 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
16544 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16545 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
16546 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
16547 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
16548 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
16549 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16550 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
16551 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
16552 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
16554 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
16555 # 0 selects Tek mode, i.e., \E%!0
16556 # 1 selects ANSI mode
16557 # 2 selects ANSI edit-mode
16558 # 3 selects VT52 mode
16560 # One odd thing about the description (which has been unchanged since the 90s)
16561 # is that the cursor addressing is using VT52 mode, and a few others use the
16562 # VT52's non-CSI versions of ANSI, e.g., \EJ.
16563 tek4107|tek4109|tektronix terminals 4107 4109,
16564 OTbs, am, mir, msgr, ul, xenl, xt,
16565 cols#79, it#8, lines#29,
16566 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
16567 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
16568 cub1=^H, cud1=^J, cuf1=\EC,
16569 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
16570 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
16571 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16572 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
16573 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
16574 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
16575 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
16576 smul=\E%!1\E[4m$<2>\E%!0,
16577 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
16578 # see the note attached to tek4207.
16579 tek4207-s|Tektronix 4207 with sysline but no memory,
16581 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
16582 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16583 is2=\E7\E[?6l\E[2K\E[?6h\E8,
16584 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
16586 # The 4110 series may be a wonderful graphics series, but they make the 4025
16587 # look good for screen editing. In the dialog area, you can't move the cursor
16588 # off the bottom line. Out of the dialog area, ^K moves it up, but there
16589 # is no way to scroll.
16591 # Note that there is a floppy for free from Tek that makes the
16592 # 4112 emulate the vt52 (use the vt52 termcap). There is also
16593 # an expected enhancement that will use ANSI standard sequences.
16595 # 4112 in non-dialog area pretending to scroll. It really wraps
16596 # but vi is said to work (more or less) in this mode.
16598 # 'vi' works reasonably well with this entry.
16600 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
16603 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
16604 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
16605 # The 4112 with the ANSI compatibility enhancement
16606 tek4112|tek4114|tektronix 4110 series,
16609 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
16610 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
16611 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
16612 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
16613 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16614 tek4112-nd|4112 not in dialog area,
16616 cuu1=^K, use=tek4112,
16617 tek4112-5|4112 in 5 line dialog area,
16618 lines#5, use=tek4112,
16619 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
16620 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
16621 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
16622 # previously \0410 and \0411 sequences...I don't *think* they were supposed
16623 # to be 4-digit octal -- esr)
16624 tek4113|tektronix 4113 color graphics with 5 line dialog area,
16627 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
16628 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16629 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
16630 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
16632 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
16633 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
16634 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16635 # :vb: needs enough delay to let you see the background color being toggled.
16636 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16638 cols#80, it#8, lines#34,
16639 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16641 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16642 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16643 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16644 # This entry is from Tek. Inc. (Brian Biehl)
16645 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16646 otek4115|Tektronix 4115,
16647 OTbs, am, da, db, eo,
16648 cols#80, it#8, lines#34,
16649 cbt=\E[Z, clear=\E[H\E[2J,
16650 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16651 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16652 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16653 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16655 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16656 kbs=^H, ri=\EM, rmam=\E[?7l,
16657 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16658 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16659 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16661 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16664 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16665 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16666 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16667 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16668 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16669 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16670 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16671 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16672 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16673 rmso=\E[m, rmul=\E[m,
16674 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
16675 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
16676 vpa=\E[%p1%{1}%+%dd,
16677 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16678 # command is ignored. The following entry replaces <csr> with the needed
16679 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16680 # chokes on; and adds a lot of initialization for the tek dialog area.
16681 # Note that this entry uses all 34 lines and sets the cursor color to green.
16682 # Steve Jacobson 8/85
16683 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16684 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16685 tek4125|tektronix 4125,
16687 csr@, dl1=\E[1M, il1=\E[1L,
16688 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16689 rc@, sc@, smkx=\E=, use=vt100,
16691 # From: <jcoker@ucbic>
16692 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16693 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16694 # note that if jcoker wasn't confused you may be able to use this one.
16695 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16696 tek4207|Tektronix 4207 graphics terminal with memory,
16697 am, bw, mir, msgr, ul, xenl,
16698 cols#80, it#8, lines#32,
16699 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16700 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16701 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16702 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16703 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16704 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16705 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16706 rev=\E[7m, ri=\E[T,
16707 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16708 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16709 smul=\E[4m, tbc=\E[1g,
16711 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16712 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16713 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16714 tek4404|tektronix 4404,
16716 cols#80, it#8, lines#32,
16717 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16718 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16719 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16720 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16721 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16722 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16723 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16724 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16725 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16726 # Some unknown person wrote:
16727 # I added the is string - straight Unix has ESC ; in the login
16728 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16729 # mode). The is string here cleans up a few things (but not
16731 ct8500|tektronix ct8500,
16734 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16735 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16736 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16737 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16738 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16740 # Tektronix 4205 terminal.
16742 # am is not defined because the wrap around occurs not when the char.
16743 # is placed in the 80'th column, but when we are attempting to type
16744 # the 81'st character on the line. (esr: hmm, this is like the vt100
16745 # version of xenl, perhaps am + xenl would work!)
16747 # Bold, dim, and standout are simulated by colors and thus not allowed
16748 # with colors. The tektronix color table is mapped into the RGB color
16749 # table by setf/setb. All colors are reset to factory specifications by oc.
16750 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16751 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16752 # interval then maps into pre-defined value.
16753 tek4205|tektronix 4205,
16755 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16756 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16757 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16758 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16759 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16760 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16761 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
16762 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
16763 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
16765 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16766 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16767 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16768 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16770 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16771 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16772 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16773 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16774 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16775 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16776 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16777 smul=\E[4m, tbc=\E[1g,
16779 #### Teletype (tty)
16781 # These are the hardcopy Teletypes from before AT&T bought the company,
16782 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16783 # pulpy yellow roll paper. If you remember these you go back a ways.
16784 # Teletype-branded VDTs are listed in the AT&T section.
16786 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16787 # other programs still default to emitting codes for the Model 37.
16790 tty33|tty35|model 33 or 35 teletype,
16793 bel=^G, cr=^M, cud1=^J, ind=^J,
16794 tty37|model 37 teletype,
16796 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16799 # There are known to be at least three flavors of the tty40, all seem more
16800 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16801 # awful braindamage, such as printing a visible newline indicator after each
16802 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16803 # braindamaged but has hope and is described here. The 40-4 is a 3270
16804 # lookalike and beyond hope. The terminal has visible bell but I don't know
16805 # it - it's null here to prevent it from showing the BL character.
16806 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16807 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16808 # to get crlf, even if <cr> is not ^M.)
16809 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16810 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16813 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16814 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16815 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16816 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16817 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16818 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16819 tty43|model 43 teletype,
16820 OTbs, am, hc, os, xon,
16822 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16827 # You can add <is2=\E<> to put this 40-column mode, though I can't
16828 # for the life of me think why anyone would want to.
16829 scanset|sc410|sc415|Tymshare Scan Set,
16832 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16833 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16834 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16835 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16836 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16838 #### Volker-Craig (vc)
16840 # If you saw a Byte Magazine cover with a terminal on it during the early
16841 # 1980s, it was probably one of these. Carl Helmers liked them because
16842 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16843 # to program one...)
16846 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16847 # every other linefeed.
16848 vc303|vc103|vc203|volker-craig 303,
16851 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16852 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16853 kcuu1=^N, ll=\017$<1>W,
16854 vc303a|vc403a|volker-craig 303a,
16855 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16856 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16857 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16858 vc404|volker-craig 404,
16861 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16862 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16863 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16864 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16865 vc404-s|volker-craig 404 w/standout mode,
16866 cud1=^J, rmso=^O, smso=^N, use=vc404,
16867 # From: <wolfgang@cs.sfu.ca>
16868 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16869 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16872 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16873 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16874 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16875 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16876 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16877 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16878 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16879 rmso=\E^_, smso=\E^Y,
16880 vc415|volker-craig 415,
16881 clear=^L, use=vc404,
16883 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16886 #### IBM PC and clones
16889 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16890 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16891 # doesn't support scrolling regions, ignores add line commands, and ignores
16892 # delete line commands. Consequently, the resulting behavior looks like a
16893 # crude adm3a-type terminal.
16894 # Steve Jacobson 8/85
16895 pcplot|pc-plot terminal emulation program,
16897 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16898 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16899 # I've found that my KayPro II, running MDM730, continues to emulate an
16900 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16901 # system the following termcap entry works well:
16902 # I have noticed a couple of minor glitches, but nothing I can't work
16903 # around. (I added two capabilities from the BRL entry -- esr)
16904 kaypro|kaypro2|kaypro II,
16907 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16908 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16909 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16911 # From IBM, Thu May 5 19:35:27 1983
16912 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16913 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16916 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16917 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16919 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16920 OTbs, am, bw, eo, hs, km, msgr, ul,
16921 cols#80, it#8, lines#24,
16922 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16923 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16924 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16925 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16926 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16927 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16928 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16929 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16930 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16931 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16932 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16933 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16934 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16935 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
16936 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16940 # Apple II firmware console first, then various 80-column cards and
16941 # terminal emulators. For two cents I'd toss all these in the UFO file
16942 # along with the 40-column apple entries.
16945 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16946 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16947 # function of TIC, not the firmware.
16948 # The clear key on a IIgs will do something like clear-screen,
16949 # depending on what you're in.
16950 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16951 OTbs, am, bw, eo, msgr,
16952 cols#80, it#8, lines#24,
16953 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16954 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16955 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16956 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16958 # Apple //e with 80-column card, entry from BRL
16959 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16960 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16961 # Auto-wrap does not work right due to newline scrolling delay, which also
16962 # requires that you set "stty cr2".
16963 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16964 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16965 # using a terminal emulation program instead of the built-in firmware.
16969 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16970 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16971 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16972 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16974 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16975 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16976 apple2e-p|Apple //e via Pascal,
16977 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16978 kcud1=^J, use=apple2e,
16979 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16980 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16981 apple-ae|ASCII Express,
16982 OTbs, am, bw, msgr, nxon, xon,
16983 cols#80, it#8, lines#24,
16984 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16985 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16986 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16987 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16989 appleII|apple ii plus,
16991 cols#80, it#8, lines#24,
16992 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16993 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16994 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16995 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16997 # Originally by Gary Ford 21NOV83
16998 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16999 apple-80|apple II with smarterm 80 col,
17002 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
17003 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
17004 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
17005 apple-soroc|apple emulating soroc 120,
17008 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17009 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
17010 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
17011 # From Peter Harrison, Computer Graphics Lab, San Francisco
17012 # ucbvax!ucsfmis!harrison .....uucp
17013 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
17014 # "These two work. If you don't have the inverse video chip for the
17015 # Apple with videx then remove the :so: and :se: fields."
17016 # (apple-videx: this used to be called DaleApple -- esr)
17017 apple-videx|Apple with videx videoterm 80 column board with inverse video,
17019 cols#80, it#8, lines#24,
17020 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
17021 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17022 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
17023 rmso=^Z2, sgr0=^Z2, smso=^Z3,
17024 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
17025 # Apple Cat ][ 212 modem, + more all
17026 # controlled by ASCII Express: Pro.
17027 # From Dave Shaver <isucs1!shaver>
17028 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
17031 acsc=, clear=^L, cuf1=^\,
17032 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17033 flash=^W35^W06, home=^Y,
17034 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
17036 apple-uterm|Ultraterm for Apple micros,
17039 acsc=, clear=^L, cuf1=^\,
17040 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17041 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
17042 # from trwrba!bwong (Bradley W. Wong):
17044 # This entry assumes that you are using an apple with the UCSD Pascal
17045 # language card. SYSTEM.MISCINFO is assumed to be the same as that
17046 # supplied with the standard apple except that screenwidth should be set
17047 # using SETUP to 80 columns. Note that the right arrow is not mapped in
17048 # this termcap entry. This is because that key, on the Apple, transmits
17049 # a ^U and would thus preempt the more useful "up" function of vi.
17052 apple80p|80-column apple with Pascal card,
17055 clear=^Y^L, cuf1=^\\:,
17056 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
17059 # Apple II+ equipped with Videx 80 column card
17061 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
17062 # manually converted by D A Gwyn
17064 # DO NOT use any terminal emulation with this data base, it works directly
17065 # with the Videx card. This has been tested with vi 1200 baud and works fine.
17067 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
17068 # 1 screen, while in R2 ^U doesn't.
17069 # For inverse alternate character set add:
17070 # <smacs>=^O:<rmacs>=^N:
17071 # (apple-v: added it#8 -- esr)
17072 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
17074 cols#80, it#8, lines#24,
17075 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
17076 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
17077 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
17078 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
17079 khome=^Y, rmso=^Z2, smso=^Z3,
17080 apple-videx3|vapple|Apple II with 80 col card,
17083 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
17084 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
17085 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17086 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
17087 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
17088 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
17089 aepro|Apple II+ running ASCII Express Pro--vt52,
17092 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
17093 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
17095 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
17096 apple-vm80|ap-vm80|apple with viewmax-80,
17099 clear=\014$<300/>, cuf1=^\\:,
17100 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
17101 ed=\013$<300/>, el=^], home=\031$<200/>,
17103 #### Apple Lisa & Macintosh
17106 # (lisa: changed <cvvis> to <cnorm> -- esr)
17107 lisa|apple lisa console display (black on white),
17108 OTbs, am, eo, msgr,
17109 cols#88, it#8, lines#32,
17110 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
17111 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
17112 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
17113 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
17114 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
17115 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
17116 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
17117 liswb|apple lisa console display (white on black),
17118 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
17119 smso=\E[m, smul=\E[4m, use=lisa,
17121 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
17122 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
17124 # These entries assume that the 'Auto Wraparound' is enabled.
17125 # Xon-Xoff flow control should also be enabled.
17127 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
17128 # settings are in non-volatile memory and don't need to be reset upon login.
17129 # Also setting the number of columns glitches the screen annoyingly.
17130 # You can type "reset" to get them set.
17132 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
17133 OTbs, OTpt, am, xenl, xon,
17134 OTkn#4, cols#80, it#8, lines#24, vt#3,
17135 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
17136 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17137 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17138 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
17139 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
17140 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
17141 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
17142 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17143 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
17144 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17146 # Lisaterm in 132 column ("wide") mode.
17147 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
17149 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
17150 # Although MacTerminal has insert/delete line, it is commented out here
17151 # since it is much faster and cleaner to use the "lock scrolling region"
17152 # method of inserting and deleting lines due to the MacTerminal implementation.
17153 # Also, the "Insert/delete ch" strings have an extra character appended to them
17154 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
17155 # supported by MacTerminal.
17156 mac|macintosh|Macintosh with MacTerminal,
17159 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
17160 # Lisaterm in 132 column ("wide") mode.
17161 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
17164 # nsterm*|Apple_Terminal - AppKit Terminal.app
17166 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
17167 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
17168 # Server and Mac OS X operating systems. There is also a
17169 # "terminal.app" in GNUStep, but I believe it to be an unrelated
17170 # codebase and I have not attempted to describe it here.
17172 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
17173 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
17174 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
17175 # version supports color.
17177 # To determine the version of Terminal.app you're using by running:
17179 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
17181 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
17183 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
17185 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
17187 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
17189 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
17190 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
17191 # might work too, but really you're on your own here since these
17192 # systems are very obsolete and I can't test them. I do welcome
17193 # patches, though :).
17197 # For GNUstep_Terminal, you're probably best off using "linux" or
17198 # writing your own terminfo.
17200 # For MacTelnet, you're on your own. It's a different codebase, and
17201 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
17203 # For iTerm.app, see "iterm".
17206 # The AppKit Terminal.app descriptions all have names beginning with
17207 # "nsterm". Note that the statusline (-s) versions use the window
17208 # titlebar as a phony status line, and may produce warnings during
17209 # compilation as a result ("tsl uses 0 parameters, expected 1".)
17210 # Ignore these warnings, or even ignore these entries entirely. Apps
17211 # which need to position the cursor or do other fancy stuff inside the
17212 # status line won't work with these entries. They're primarily useful
17213 # for programs like Pine which provide simple notifications in the
17214 # status line. Please note that non-ASCII characters don't work right
17215 # in the status line, since Terminal.app incorrectly interprets their
17216 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
17217 # versions) or only accepts status lines consisting entirely of
17218 # characters from the first 256 Unicode positions (including C1 but
17221 # The Mythology* of AppKit Terminal.app:
17223 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
17224 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
17225 # shareware replacement for Terminal called "Stuart" which NeXT bought
17226 # and used as the basis for the Terminal.app in NeXTstep 2+,
17227 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
17228 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
17229 # capabilities for the early versions, but I believe that the
17230 # TERM_PROGRAM_VERSION may have been reset at some point.
17232 # The early versions were tailored to the NeXT character set. Sometime
17233 # after the Apple aquisition the encoding was swiched to MacRoman
17234 # (initally with serious altcharset bugs due to incomplete conversion
17235 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
17236 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
17237 # 8-color support (initially buggy when combined with attributes, but
17238 # that was later fixed.) More recently, around Mac OS X version 10.3
17239 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
17240 # some versions (for instance 133-1 which shipped with Mac OS X
17241 # version 10.4) this suffered from the <bce> bug, but that seems to
17242 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
17244 # In the early days of Mac OS X the terminal was fairly buggy and
17245 # would routinely crash under load. Many of these bugs seem to have
17246 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
17247 # some may still remain. This change seems to correspond to
17248 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
17249 # it did previously.
17251 # * This may correspond with what actually happened, but I don't
17252 # know. It is based on guesswork, hearsay, private correspondence,
17253 # my faulty memory, and the following online sources and references:
17255 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
17256 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
17258 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
17259 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
17261 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
17262 # "nsterm" to comply with the name length and case conventions and
17263 # limitations of various software packages [notably Solaris terminfo
17264 # and UNIX.] A single Apple_Terminal alias is retained for
17265 # backwards-compatbility.
17267 # * Added function key support (F1-F4). These only work in Terminal.app
17268 # version 51, hopefully the capabilities won't cause problems for people
17269 # using version 41.
17271 # * Added "full color" (-c) entries which support the 16-color mode in
17274 # * By default, version 51 uses UTF-8 encoding with broken altcharset
17275 # support, so "ASCII" (-7) entries without altcharset support were
17278 # nsterm - AppKit Terminal.app
17280 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
17281 # Terminal.app. It is a partial VT100 emulation with some xterm-like
17282 # extensions. This terminfo was written to describe versions 41
17283 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
17284 # version 10.1) of Terminal.app.
17286 # Terminal.app runs under the Mac OS X Quartz windowing system (and
17287 # other AppKit-supported windowing systems.) On the Mac OS X machine I
17288 # use, the executable for Terminal.app is:
17289 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
17291 # If you're looking for a description of the full-screen system
17292 # console which runs under Apple's Darwin operating system on PowerPC
17293 # platforms, see the "xnuppc" entry instead.
17295 # There were no function keys in version 41. In version 51, there are
17296 # four working function keys (F1, F2, F3 and F4.) The function keys
17297 # are included in all of these entries.
17299 # It does not support mouse pointer position reporting. Under some
17300 # circumstances the cursor can be positioned using option-click; this
17301 # works by comparing the cursor position and the selected position,
17302 # and simulating enough cursor-key presses to move the cursor to the
17303 # selected position. This technique fails in all but the simplest
17306 # It provides partial ANSI color support (background colors interacted
17307 # badly with bold in version 41, though, as reflected in :ncv:.) The
17308 # monochrome (-m) entries are useful if you've disabled color support
17309 # or use a monochrome monitor. The full color (-c) entries are useful
17310 # in version 51, which doesn't exhibit the background color bug. They
17311 # also enable an xterm-compatible 16-color mode.
17313 # The configurable titlebar is set using xterm-compatible sequences;
17314 # it is used as a status bar in the statusline (-s) entries. Its width
17315 # depends on font sizes and window sizes, but 50 characters seems to
17316 # be the default for an 80x24 window.
17318 # The MacRoman character encoding is used for some of the alternate
17319 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
17320 # disable alternate character set support entirely, and the "VT100"
17321 # (-acs) entries rely instead on Terminal.app's own buggy VT100
17322 # graphics emulation, which seems to think the character encoding is
17323 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
17324 # are useful in Terminal.app version 51, which supports UTF-8 and
17325 # other ASCII-compatible character encodings but does not correctly
17326 # implement VT100 graphics; once VT100 graphics are correctly
17327 # implemented in Terminal.app, the "VT100" (-acs) entries should be
17328 # usable in any ASCII-compatible character encoding [except perhaps
17329 # in UTF-8, where some experts argue for disallowing alternate
17330 # characters entirely.]
17332 # Terminal.app reports "vt100" as the terminal type, but exports
17333 # several environment variables which may aid detection in a shell
17334 # profile (i.e. .profile or .login):
17337 # TERM_PROGRAM=Apple_Terminal
17338 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
17339 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
17341 # For example, the following Bourne shell script would detect the
17342 # correct terminal type:
17344 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
17347 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
17349 # TERM="nsterm-old"
17351 # TERM="nsterm-c-7"
17355 # In a C shell derivative, this would be accomplished by:
17357 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
17358 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
17359 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
17360 # setenv TERM "nsterm-old"
17362 # setenv TERM "nsterm-c-7"
17367 # The '+' entries are building blocks
17368 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
17369 am, bw, msgr, xenl, xon,
17370 cols#80, it#8, lines#24,
17371 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
17372 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
17373 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
17374 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17375 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
17376 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
17377 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
17378 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
17379 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17380 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17381 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
17382 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17383 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
17385 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
17386 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17387 enacs=\E(B\E)0, rmacs=^O,
17388 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17389 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17391 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
17392 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
17393 enacs=\E(B\E)0, rmacs=^O,
17394 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17395 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
17397 # compare with xterm+sl-twm
17398 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
17401 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
17403 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
17404 op=\E[0m, use=ibm+16color,
17406 nsterm+c41|AppKit Terminal.app v41 color support,
17407 colors#8, ncv#37, pairs#64,
17408 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17410 # These are different combinations of the building blocks
17412 # ASCII charset (-7)
17413 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
17416 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
17417 use=nsterm+s, use=nsterm+7,
17419 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
17420 use=nsterm+c41, use=nsterm+7,
17422 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
17423 use=nsterm+c, use=nsterm+7,
17425 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
17426 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
17428 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
17429 use=nsterm+s, use=nsterm+c, use=nsterm+7,
17431 # VT100 alternate-charset (-acs)
17432 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
17435 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
17436 use=nsterm+s, use=nsterm+acs,
17438 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
17439 use=nsterm+c41, use=nsterm+acs,
17441 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
17442 use=nsterm+c, use=nsterm+acs,
17444 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
17445 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
17447 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
17448 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
17451 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
17454 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
17455 use=nsterm+s, use=nsterm+mac,
17457 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
17458 use=nsterm+c41, use=nsterm+mac,
17460 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
17461 use=nsterm+c, use=nsterm+mac,
17463 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
17464 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
17466 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
17467 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
17469 # In Mac OS X version 10.5 the format of the preferences has changed
17470 # and a new, more complex technique is needed, e.g.,
17472 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
17473 # "NSUserDefaults");ud=NSUserDefaults.alloc();
17474 # ud.init();prefs=ud.persistentDomainForName_(
17475 # "com.apple.Terminal");prefs["Window Settings"][
17476 # prefs["Default Window Settings"]]["TerminalType"
17477 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
17478 # "com.apple.Terminal")' nsterm-16color
17480 # and it is still not settable from the preferences dialog. This is
17481 # tracked under rdar://problem/7365108 and rdar://problem/7365134
17482 # in Apple's bug reporter.
17483 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
17485 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
17486 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
17487 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
17488 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17489 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17490 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
17491 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
17492 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
17493 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
17494 use=nsterm-c-s-acs,
17496 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
17497 # the background color erase bug. The newer version 240.2 in Mac OS X
17498 # version 10.5 does not.
17500 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
17501 # and D P Schreber comparing to nsterm-c-s-acs.
17503 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
17504 # can be set in Terminal.app, e.g.,
17506 # defaults write com.apple.Terminal TermCapString nsterm-bce
17508 # and that it is not set in Terminal's preferences dialog.
17509 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
17510 bce, bw, use=nsterm-16color,
17512 # This is an alias which should always point to the "current" version
17513 nsterm|Apple_Terminal|AppKit Terminal.app,
17514 use=nsterm-16color,
17516 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
17517 # more featureful) terminal emulator for Mac OS X. It is similar
17518 # enough in capabilities to nsterm-16color that I have derived this
17519 # description from that one, but as far as I know they share no code.
17520 # Many of the features are user-configurable, but I attempt only to
17521 # describe the default configuration.
17523 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
17525 iTerm.app|iTerm.app terminal emulator for Mac OS X,
17527 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
17528 use=nsterm-16color,
17530 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
17532 # On PowerPC platforms, Apple's Darwin operating system uses a
17533 # full-screen system console derived from a NetBSD framebuffer
17534 # console. It is an ANSI-style terminal, and is not really VT-100
17537 # Under Mac OS X, this is the system console driver used while in
17538 # single-user mode [reachable by holding down Command-S during the
17539 # boot process] and when logged in using console mode [reachable by
17540 # typing ">console" at the graphical login prompt.]
17542 # If you're looking for a description of the Terminal.app terminal
17543 # emulator which runs under the Mac OS X Quartz windowing system (and
17544 # other AppKit-supported windowing systems,) see the "nsterm"
17547 # NOTE: Under Mac OS X version 10.1, the default login window does not
17548 # prompt for user name, instead requiring an icon to be selected from
17549 # a list of known users. Since the special ">console" login is not in
17550 # this list, you must make one of two changes in the Login Window
17551 # panel of the Login section of System Prefs to make the special
17552 # ">console" login accessible. The first option is to enable 'Show
17553 # "Other User" in list for network users', which will add a special
17554 # "Other..." icon to the graphical login panel. Selecting "Other..."
17555 # will present the regular graphical login prompt. The second option
17556 # is to change the 'Display Login Window as:' setting to 'Name and
17557 # password entry fields', which replaces the login panel with a
17558 # graphical login prompt.
17560 # There are no function keys, at least not in Darwin 1.3.
17562 # It has no mouse support.
17564 # It has full ANSI color support, and color combines correctly with
17565 # all three supported attributes: bold, inverse-video and underline.
17566 # However, bold colored text is almost unreadable (bolding is
17567 # accomplished using shifting and or-ing, and looks smeared) so bold
17568 # has been excluded from the list of color-compatible attributes
17569 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
17570 # monochrome monitor.
17572 # There is one serious bug with this terminal emulation's color
17573 # support: repositioning the cursor onto a cell with non-matching
17574 # colors obliterates that cell's contents, replacing it with a blank
17575 # and displaying a colored cursor in the "current" colors. There is
17576 # no complete workaround at present [other than using the monochrome
17577 # (-m) entries,] but removing the (msgr) capability seemed to help.
17579 # The "standout" chosen was simple reverse-video, although a colorful
17580 # standout might be more aesthetically pleasing. Similarly, the bold
17581 # chosen is the terminal's own smeared bold, although a simple
17582 # color-change might be more readable. The color-bold (-b) entries
17583 # uses magenta colored text for bolding instead. The fancy color (-f
17584 # and -f2) entries use color for bold, standout and underlined text
17585 # (underlined text is still underlined, though.)
17587 # Apparently the terminal emulator does support a VT-100-style
17588 # alternate character set, but all the alternate character set
17589 # positions have been left blank in the font. For this reason, no
17590 # alternate character set capabilities have been included in this
17591 # description. The console driver appears to be ASCII-only, so (enacs)
17592 # has been excluded [although the VT-100 sequence does work.]
17594 # The default Mac OS X and Darwin installation reports "vt100" as the
17595 # terminal type, and exports no helpful environment variables. To fix
17596 # this, change the "console" entry in /etc/ttys from "vt100" to
17597 # "xnuppc-WxH", where W and H are the character dimensions of your
17598 # console (see below.)
17600 # The font used by the terminal emulator is apparently one originally
17601 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
17602 # file includes descriptions for the following geometries:
17604 # Pixels Characters Entry Name (append -m for monochrome)
17605 # -------------------------------------------------------------------
17606 # 640x400 80x25 xnuppc-80x25
17607 # 640x480 80x30 xnuppc-80x30
17608 # 720x480 90x30 xnuppc-90x30
17609 # 800x600 100x37 xnuppc-100x37
17610 # 896x600 112x37 xnuppc-112x37
17611 # 1024x640 128x40 xnuppc-128x40
17612 # 1024x768 128x48 xnuppc-128x48
17613 # 1152x768 144x48 xnuppc-144x48
17614 # 1280x1024 160x64 xnuppc-160x64
17615 # 1600x1024 200x64 xnuppc-200x64
17616 # 1600x1200 200x75 xnuppc-200x75
17617 # 2048x1536 256x96 xnuppc-256x96
17619 # The basic "xnuppc" entry includes no size information, and the
17620 # emulator includes no reporting capability, so you'll be at the mercy
17621 # of the TTY device (which reports incorrectly on my hardware.) The
17622 # color-bold entries do not include size information.
17624 # The '+' entries are building blocks
17625 xnuppc+basic|Darwin PowerPC Console basic capabilities,
17626 am, bce, mir, xenl,
17628 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17629 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17630 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17631 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
17632 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
17633 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17634 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
17635 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17637 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17638 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
17639 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
17641 xnuppc+c|Darwin PowerPC Console ANSI color support,
17642 colors#8, ncv#32, pairs#64,
17643 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17645 xnuppc+b|Darwin PowerPC Console color-bold support,
17648 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
17651 xnuppc+f|Darwin PowerPC Console fancy color support,
17653 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
17654 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
17656 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
17659 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
17660 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
17662 # Building blocks for specific screen sizes
17663 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
17666 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
17669 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
17672 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
17673 cols#100, lines#37,
17675 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
17676 cols#112, lines#37,
17678 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
17679 cols#128, lines#40,
17681 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
17682 cols#128, lines#48,
17684 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
17685 cols#144, lines#48,
17687 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
17688 cols#160, lines#64,
17690 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
17691 cols#200, lines#64,
17693 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
17694 cols#200, lines#75,
17696 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
17697 cols#256, lines#96,
17699 # These are different combinations of the building blocks
17701 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
17704 xnuppc|darwin|Darwin PowerPC Console (color),
17705 use=xnuppc+c, use=xnuppc+basic,
17707 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
17710 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
17711 use=xnuppc+b, use=xnuppc+c,
17713 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
17716 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
17717 use=xnuppc+f, use=xnuppc+c,
17719 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
17722 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
17723 use=xnuppc+f2, use=xnuppc+c,
17725 # Combinations for specific screen sizes
17726 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
17727 use=xnuppc+80x25, use=xnuppc+basic,
17729 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
17730 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
17732 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
17733 use=xnuppc+80x30, use=xnuppc+basic,
17735 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
17736 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
17738 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
17739 use=xnuppc+90x30, use=xnuppc+basic,
17741 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
17742 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
17744 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
17745 use=xnuppc+100x37, use=xnuppc+basic,
17747 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
17748 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
17750 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
17751 use=xnuppc+112x37, use=xnuppc+basic,
17753 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
17754 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
17756 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
17757 use=xnuppc+128x40, use=xnuppc+basic,
17759 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
17760 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
17762 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
17763 use=xnuppc+128x48, use=xnuppc+basic,
17765 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
17766 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
17768 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
17769 use=xnuppc+144x48, use=xnuppc+basic,
17771 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17772 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17774 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17775 use=xnuppc+160x64, use=xnuppc+basic,
17777 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17778 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17780 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17781 use=xnuppc+200x64, use=xnuppc+basic,
17783 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17784 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17786 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17787 use=xnuppc+200x75, use=xnuppc+basic,
17789 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17790 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17792 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17793 use=xnuppc+256x96, use=xnuppc+basic,
17795 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17796 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17798 #### Radio Shack/Tandy
17801 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17802 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17803 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17804 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17806 cols#80, it#8, lines#24,
17807 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17808 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17809 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17810 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17811 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17812 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17813 # (trs2: removed obsolete ":nl=^_:" -- esr)
17814 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17816 cols#80, it#8, lines#24,
17817 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17818 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17819 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17820 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17821 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17822 # (This had extension capabilities
17823 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17824 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17825 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17826 trs16|trs-80 model 16 console,
17828 cols#80, it#8, lines#24,
17829 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17830 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17831 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17832 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17833 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17834 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17835 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17836 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17837 smacs=\ERG, smso=\ERD,
17839 #### Commodore Business Machines
17841 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17842 # after years of shaky engineering and egregious mismanagement. Made one
17843 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17844 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17845 # ever (most units sold); they can still be found gathering dust in closets
17849 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17850 # Added a few more entries, converted caret-type control sequence (^x) entries
17851 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17852 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17854 # :as:, :ae: Support for alternate character sets.
17855 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17856 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17857 # This one appears to fix a problem I always had with a line ending
17858 # at 'width+1' (I think) followed by a blank line in vi. The blank
17859 # line tended to disappear and reappear depending on how the screen
17860 # was refreshed. Note that this is probably needed only if you use
17861 # something like a Dnet Fterm with the window sized to some peculiar
17862 # dimension larger than 80 columns.
17863 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17864 # (amiga: removed obsolete :kn#10:,
17865 # also added empty <acsc> to suppress a warning --esr)
17867 OTbs, am, bw, xenl,
17869 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17870 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17871 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17872 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17873 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17874 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17875 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17876 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17877 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17878 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17879 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17880 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17881 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17883 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17884 # (amiga: added empty <acsc> to suppress a warning.
17885 # I'm told this entry screws up badly with AS225, the Amiga
17886 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17887 amiga-h|Hans Verkuil's Amiga ANSI,
17890 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17891 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17892 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17893 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17894 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17895 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17896 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17897 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17898 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17899 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17900 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17901 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17902 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17903 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17904 smso=\2337m, smul=\2334m,
17906 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17908 # Pavel Fedin added
17913 amiga-8bit|Amiga ANSI using 8-bit controls,
17914 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17915 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17916 kpp=\233T, ri=\215, rin@, use=amiga-h,
17918 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17919 # requires use of appropriate preferences settings.
17920 amiga-vnc|Amiga using VNC console (black on light gray),
17921 am, da, db, msgr, ndscr,
17922 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17923 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17924 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17925 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17926 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17927 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17928 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17929 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17930 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17931 indn=\E[%p1%dS, invis=\E8m,
17932 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17933 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17934 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17935 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17936 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17937 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17938 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17939 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17940 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17941 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17942 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17943 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17944 smso=\E[1m, smul=\E[4m,
17946 # MorphOS on Genesi Pegasos
17947 # By Pavel Fedin <sonic_amiga@rambler.ru>
17949 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17950 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17951 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17952 ri=\215, rin@, use=amiga-h,
17954 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17955 # I'm trying to write a termcap for a commodore b-128, and I'm
17956 # having a little trouble. I've had to map most of my control characters
17957 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17958 # and create some functions (like cm), but thats life.
17959 # The problem is with the arrow keys - right, and up work fine, but
17960 # left deletes the previous character and down I just can't figure out.
17961 # Jove knows what I want, but I don't know what it's sending to me (it
17962 # isn't thats bound to next-line in jove).
17963 # Anybody got any ideas? Here's my termcap.
17964 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17966 commodore|b-128|Commodore B-128 micro,
17968 OTdN#20, cols#80, lines#24, pb#150,
17969 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17970 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17971 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17972 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17973 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17978 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17979 northstar|North Star Advantage,
17983 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17984 el=\016$<200/>, home=\034\032$<200/>,
17988 # Thu Jul 7 03:55:16 1983
17990 # As an aside, be careful; it may sound like an anomaly on the
17991 # Osborne, but with the 80-column upgrade, it's too easy to
17992 # enter lines >80 columns!
17994 # I've already had several comments...
17995 # The Osborne-1 with the 80-col option is capable of being
17996 # 52, 80, or 104 characters wide; default to 80 for compatibility
17997 # with most systems.
17999 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18000 osborne-w|osborne1-w|osborne I in 104-column mode,
18002 cols#104, lines#24,
18003 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18004 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18005 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18006 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18007 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18008 osborne|osborne1|osborne I in 80-column mode,
18009 OTbs, am, mir, msgr, ul, xhp,
18010 OTdB#4, cols#80, lines#24,
18011 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18012 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18013 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18014 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18015 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18017 # Osborne Executive definition from BRL
18018 # Similar to tvi920
18019 # Added by David Milligan and Tom Smith (SMU)
18020 osexec|Osborne executive,
18022 OTug#1, cols#80, lines#24, xmc#1,
18023 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18024 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18025 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18026 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18027 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18028 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18029 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18032 #### Console types for obsolete UNIX clones
18034 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18035 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18036 # were commercial, Minix an educational tool sold in conjunction with a book.
18037 # Memory-segmentation limits and a strong tendency to look like V7 long after
18038 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18039 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18040 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18041 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18042 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18043 # even as single processes under SunOS and the Macintosh OS.
18047 # http://www.minix3.org/manpages/man4/console.4.html
18048 minix|minix console (v3),
18049 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18050 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18051 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18052 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18053 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18054 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18055 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18056 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18057 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18058 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18059 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18060 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18061 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18062 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18065 minix-3.0|minix console (v3.0),
18066 use=ecma+color, use=minix-1.7,
18069 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18070 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18071 minix-1.7|minix console (v1.7),
18073 cols#80, it#8, lines#25,
18074 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18075 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18076 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18077 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18078 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18079 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18080 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18081 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18082 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18083 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18084 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18085 smso=\E[7m, smul=\E[4m,
18086 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18087 minix-old|minix-1.5|minix console (v1.5),
18089 cols#80, it#8, lines#25,
18090 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18091 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18092 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18093 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18094 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18095 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18096 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18097 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18098 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18099 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18100 # The linewrap option can be specified by editing /usr/include/minix/config.h
18101 # before recompiling the minix 1.5 kernel.
18102 minix-old-am|minix console with linewrap,
18105 pc-minix|minix console on an Intel box,
18106 use=klone+acs, use=minix-3.0,
18108 # According to the Coherent 2.3 manual, the PC console is similar
18109 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18110 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18111 # has blinking and bold.
18112 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18114 cols#80, it#8, lines#25,
18115 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18116 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18117 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18118 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18119 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18121 # According to the Venix 1.1 manual, the PC console is similar
18122 # to a DEC vt52. Differences seem to be (1) arrow keys send
18123 # different strings, (2) enhanced standout, (3) added insert/delete line.
18124 # Note in particular that it doesn't have automatic margins.
18125 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18126 # not described here because this derives from an old termcap entry.
18127 pc-venix|venix|IBM PC console running Venix,
18128 cols#80, it#8, lines#25,
18129 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18130 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18131 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18132 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18134 #### Miscellaneous microcomputer consoles
18136 # If you know anything more about any of these, please tell me.
18139 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18140 # It may be used as a terminal by putting it in "line" mode as seen on
18141 # one of the status lines.
18142 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18143 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18144 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18145 # used \ED instead.
18146 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18147 mai|basic4|MAI Basic Four in ansi mode,
18148 am, da, db, mir, msgr,
18149 cols#82, it#8, lines#25,
18150 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18151 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18152 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18153 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18154 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18155 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18156 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18157 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18158 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18159 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18160 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18161 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18162 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18164 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18165 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18166 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18167 # about 1,5 km from where I live, but doesn't build own computers any
18168 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18169 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18170 # video output for a TV set or a dedicated monitor and several slots for
18171 # Apple II cards. Basis 108 were quite popular at german schools before
18172 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18173 # development system (which I used even in 1993 to program the steering
18174 # and data recording for our school's experimental solar panel :), Apple DOS
18176 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18177 basis|BASIS108 computer with terminal translation table active,
18178 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18179 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18180 smso=\E(, use=adm3a,
18181 # luna's BMC terminal emulator
18182 luna|luna68k|LUNA68K Bitmap console,
18183 cols#88, lines#46, use=ansi-mini,
18184 megatek|pegasus workstation terminal emulator,
18187 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18188 # interface (pre-Macintosh by several years) that went nowhere.
18189 xerox820|x820|Xerox 820,
18192 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18193 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18196 #### Videotex and teletext
18199 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18200 # \E[?3l 80 columns
18201 # \E[?4l scrolling on
18202 # \E[12h local echo off
18203 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18204 # \E)0 G1 DEC set (line graphics)
18206 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18207 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18208 OTbs, eslok, hs, xenl,
18209 cols#80, it#8, lines#24, wsl#72, xmc#0,
18210 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18211 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18212 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18213 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18214 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18215 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18216 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18217 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18218 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18219 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18220 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18221 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18222 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18223 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18224 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18225 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18226 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18227 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18228 u6=\E[%i%d;%dR, u7=\E[6n,
18230 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18232 minitel1|minitel 1,
18233 am, bw, eslok, hs, hz, msgr,
18234 colors#8, cols#40, lines#24, pairs#8,
18235 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18236 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18237 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18238 enacs=^Y, fsl=^J, home=^^, ind=^J,
18239 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18240 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18241 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18242 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18243 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18244 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18245 minitel1b|minitel 1-bistandard (in 40cols mode),
18247 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18248 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18249 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18250 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18251 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18252 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18253 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18254 # <rmkx> posait des problemes (logout en sortant de vi).
18255 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18257 colors@, cols#80, it#8, pairs@,
18258 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18259 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18260 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18261 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18262 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18263 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18264 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18265 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18266 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18268 ######## OBSOLETE VDT TYPES
18270 # These terminals are *long* dead -- these entries are retained for
18271 # historical interest only.
18273 #### Amtek Business Machines
18276 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18277 # but these caps were commented out in 8.3; also, removed overridden
18278 # ":do=^J:" -- esr)
18279 abm80|amtek business machines 80,
18282 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18283 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18284 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18286 #### Bell Labs blit terminals
18288 # These were AT&T's official entries. The 5620 FAQ maintained by
18289 # David Breneman <daveb@dgtl.com> has this to say:
18291 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18292 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18293 # was good. But lo, upon the horizon loomed a mighty management-type person
18294 # (known now only by the initials VP) who said, the mighty Jerq must stay
18295 # alone, and could not go forth into the world. So Locanthi and Pike put the
18296 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18297 # world. And the Jerq lived the rest of its days in research, but never
18298 # strayed from those paths.
18300 # In all seriousness, the Blit was originally known as the Jerq, but when
18301 # it started to be shown outside of the halls of the Bell Labs Research
18302 # organization, the management powers that be decided that the name could
18303 # not remain. So it was renamed to be Blit. This was in late 1981.
18305 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18309 blit|jerq|blit running teletype rom,
18311 cols#87, it#8, lines#72,
18312 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18313 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18314 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18315 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18316 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18317 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18319 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18320 cbblit|fixterm|blit running columbus code,
18322 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18323 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18324 smul=\EU", use=blit,
18326 oblit|ojerq|first version of blit rom,
18327 am, da, db, eo, mir, ul, xon,
18328 cols#88, it#8, lines#72,
18329 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18330 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18331 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18332 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18335 #### Bolt, Beranek & Newman (bbn)
18337 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18338 # The parent company, best known as the architects of the Internet, is
18341 # Jeff DelPapa <dp@world.std.com> writes:
18342 # The bitgraph was a large white box that contained a monochrome bitmap
18343 # display, and a 68000 to run it. You could download code and run it on
18344 # the cpu, it had 128kb (I think) of memory. I used one in the late
18345 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18346 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18347 # rate, and looked like a rubber sheet stretching, then snapping
18348 # upwards. It had everything the early mac had, except a floppy drive a
18349 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18350 # Beranek and Neuman) sold at most a few hundred of them to the real
18351 # world. DOD may have bought more...
18354 # Entries for the BitGraph terminals. The problem
18355 # with scrolling in vi can only be fixed by getting BBN to put
18356 # smarter scroll logic in the terminal or changing vi or padding
18357 # scrolls with about 500 ms delay.
18359 # I always thought the problem was related to the terminal
18360 # counting newlines in its input buffer before scrolling and
18361 # then moving the screen that much. Then vi comes along and
18362 # paints lines in on the bottom line of the screen, so you get
18363 # this big white gap.
18365 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18366 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18368 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18369 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18371 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18374 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18375 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18376 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18377 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18378 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18379 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18380 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18381 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18383 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18384 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18386 bg1.25nv|bbn bitgraph 1.25 (normal video),
18387 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18389 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18390 bg1.25|bbn bitgraph 1.25,
18392 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18393 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18394 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18395 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18396 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18397 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18398 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18401 #### Bull (bq, dku, vip)
18403 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18405 #============================================#
18406 # BULL QUESTAR 210 `SDP' terminals emulation #
18407 #============================================#
18409 # Description written by R.K.Saunders (Bull Transac)
18411 # Modifications written by F. Girard (Bull MTS)
18412 # 19-05-87 V02.00.01
18413 # 17-12-87 V02.00.02
18414 # 15-09-89 V02.00.05
18416 # Typical technical selections F1 (modes SDP/ROLL):
18417 # -------------------------------------------------------
18418 # | 01 02 03 04 05 06 07 08 09 10 |
18419 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18421 # | 11 12 13 14 15 16 17 18 19 20 |
18422 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18424 # | 21 22 23 24 25 26 27 28 29 30 |
18425 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18427 # | 31 32 33 34 35 36 37 38 39 40 |
18428 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18429 # -------------------------------------------------------
18430 # Typical firmware identification F5 "etat 6":
18431 # P287.02.04b (AZERTY)
18432 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18433 # P298.03.03 (monochrome) or P374.03.02 (colour)
18435 # SM SDP mode (VIP command): ^[[?=h
18436 # RIS (erases screen): ^[c
18437 # DMI disable keyboard: ^[`
18438 # SM double rendition mode: ^[[?>h
18439 # RM solicited status mode: ^[[5l
18440 # RM character mode: ^[[>l
18441 # RM echoplex mode: ^[[12l
18442 # RM column tab mode: ^[[18l
18443 # RM forbid SS2 keyboard mode: ^[[?<l
18444 # SM scroll mode: ^[[=h
18445 # FCF enable XON/XOFF: ^[P1s^[\
18446 # MTL select end msg character: ^[[^Wp
18447 # EMI enable keyboard: ^[b
18448 # RIS retour etat initial: ^[c
18449 # enable FC keypad: ^[[?<h,
18450 # MPW map status line window: ^[PY99:98^[\
18451 # SCP select status line: ^[[0;98v
18452 # ED erase entire partition: ^[[2J
18453 # SCP select main partition: ^[[v
18454 # SM character insertion mode: ^[[4h
18455 # RM character replacement mode: ^[[4l
18456 # COO cursor on: ^[[r
18457 # COO cursor off: ^[[1r
18458 # SGR dim (turquoise) rev attr: ^[[2;7m
18459 # SGR Data normal attr: ^[[m
18460 # SO Line-graphic mode ON: ^N
18461 # SI Line-graphic mode OFF: ^O
18462 # MC start routing to printer: ^[[5i
18463 # MC stop routing to printer: ^M^[[4i
18466 # This entry covers the following terminals:
18467 # dku7102, tws2102, and tws models 2105 to 2112
18468 tws-generic|dku7102|Bull Questar tws terminals,
18469 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18470 cols#80, it#8, lines#24, wsl#80,
18471 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18472 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18473 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18474 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18475 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18476 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18477 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18478 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18479 il1=\E[L, ind=^J, invis=\E[0;8m,
18480 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18481 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18482 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18483 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18484 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18485 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18486 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18487 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18488 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18489 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18490 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18491 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18492 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18493 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18494 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18495 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18496 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18498 tws2103|xdku|BULL Questar tws2103,
18499 ht=^I, use=tws-generic,
18500 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18501 ht=^I, use=tws2102-sna,
18502 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18503 clear=\E[2J\E[H, cup@, dl@, dl1@,
18504 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18505 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18507 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18508 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18509 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18510 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18512 #=========================================================#
18513 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18514 #=========================================================#
18516 # Description written by J. Staerck (BULL SA)
18517 # Copyright (c) 1989 BULL SA
18518 #---------------------------------------------------------------------------
18519 # This entry is used for terminals with vt320 emulation mode
18520 # and following set-up :
18521 # 8 bit ISO Latin Character Set (ISO 8859-1),
18522 # 7 bit Control Characters,
18523 # 80 columns screen.
18524 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18525 # They are used in string capabilities with vt220-320 emulation mode.
18526 # In the following DEC definitions, two kinds of terminfo databases are
18528 # 1. the first with Command Sequence Introducer starting with escape
18529 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18530 # 2. the second with Command Sequence Introducer starting with escape
18531 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18532 # Soft Terminal Reset esc [ ! p
18533 # RIS (erases screen): esc c
18534 # DECKPNM numeric keypad mode: esc >
18535 # DECKPAM applic. keypad mode: esc =
18536 # DECSTBM Scrolling region: esc [ r
18537 # SCS select G0 = US: esc ( B
18538 # SCS select G1 = line-graphic: esc ) 0
18539 # Select 7-bit C1 controls: esc sp F
18540 # Select 8-bit C1 controls: esc sp G
18541 # Select cursor home: esc [ H
18542 # Select erase screen: esc [ J
18543 # SM KAM lock keyboard: esc [ 2 h
18544 # RM KAM unlock keyboard: esc [ 2 l
18545 # SM SRM local echo off: esc [ 1 2 h
18546 # RM SRM local echo on: esc [ 1 2 l
18547 # SM LNM New line : esc [ 2 0 h
18548 # RM LNM return = CR only: esc [ 2 0 l
18549 # SM DECCKM cursor keys mode: esc [ ? 1 h
18550 # RM DECCKM appli. keys mode: esc [ ? 1 l
18551 # SM DECANM ANSI mode on: esc [ ? 2 h
18552 # RM DECANM ANSI mode off: esc [ ? 2 l
18553 # SM DECCOLM 132-column screen: esc [ ? 3 h
18554 # RM DECCOLM 80-column screen: esc [ ? 3 l
18555 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18556 # RM DECSCLM Jump scroll: esc [ ? 4 l
18557 # SM DECSCNM screen light backgr. esc [ ? 5 h
18558 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18559 # SM DECOM move within margins: esc [ ? 6 h
18560 # RM DECOM move outside margins: esc [ ? 6 l
18561 # SM DECAWM auto right margin: esc [ ? 7 h
18562 # RM DECAWM auto right margin: esc [ ? 7 l
18563 # SM DECARM auto repeat: esc [ ? 8 h
18564 # RM DECARM auto repeat: esc [ ? 8 l
18565 # DECSASD Select active main: esc [ 0 $ }
18566 # DECSASD Select active status: esc [ 1 $ }
18567 # DECSSDT Select status none: esc [ 0 $ ~
18568 # DECSSDT Select status indic.: esc [ 1 $ ~
18569 # DECSSDT Select status host-wr: esc [ 2 $ ~
18570 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18571 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18572 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18573 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18574 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18575 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18576 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18577 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18578 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18579 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18580 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18581 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18582 # Char. and Line attributes: esc [ Ps ... Ps m
18583 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18584 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18587 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
18588 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
18589 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
18590 cols#80, it#8, lines#24, vt#3, wsl#80,
18591 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18592 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
18593 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
18594 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18595 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18596 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18597 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18598 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
18599 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
18600 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
18601 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
18602 is1=\E[63;1"p\E[2h,
18603 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18604 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
18605 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
18606 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
18607 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
18608 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
18609 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
18610 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
18611 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18612 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
18613 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
18614 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
18615 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
18617 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18618 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
18619 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
18620 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
18621 bq300-rv|Bull vt320 reverse 80 columns,
18622 flash=\E[?5l$<50>\E[?5h,
18623 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18625 bq300-w|Bull vt320 132 columns,
18627 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18628 rs2=\E[?3h, use=bq300,
18629 bq300-w-rv|Bull vt320 reverse mode 132 columns,
18631 flash=\E[?5l$<50>\E[?5h,
18632 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18633 rs2=\E[?3h, use=bq300,
18635 # This entry is used for terminals with vt320 emulation mode
18636 # and following set-up :
18637 # 8 bit ISO Latin Character Set (ISO 8859-1),
18638 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
18639 # 80 columns screen.
18640 # Soft Terminal Reset csi ! p
18641 # RIS (erases screen): esc c
18642 # DECKPNM numeric keypad mode: esc >
18643 # DECKPAM applic. keypad mode: esc =
18644 # DECSTBM Scrolling region: esc [ r
18645 # SCS select G0 = US: esc ( B
18646 # SCS select G1 = line-graphic: esc ) 0
18647 # Select 7-bit C1 controls: esc sp F
18648 # Select 8-bit C1 controls: esc sp G
18649 # Select cursor home: csi H
18650 # Select erase screen: csi J
18651 # SM KAM lock keyboard: csi 2 h
18652 # RM KAM unlock keyboard: csi 2 l
18653 # SM SRM local echo off: csi 1 2 h
18654 # RM SRM local echo on: csi 1 2 l
18655 # SM LNM New line : csi 2 0 h
18656 # RM LNM return = CR only: csi 2 0 l
18657 # SM DECCKM cursor keys mode: csi ? 1 h
18658 # RM DECCKM appli. keys mode: csi ? 1 l
18659 # SM DECANM ANSI mode on: csi ? 2 h
18660 # RM DECANM ANSI mode off: csi ? 2 l
18661 # SM DECCOLM 132-column screen: csi ? 3 h
18662 # RM DECCOLM 80-column screen: csi ? 3 l
18663 # SM DECSCLM Smooth scroll: csi ? 4 h
18664 # RM DECSCLM Jump scroll: csi ? 4 l
18665 # SM DECSCNM screen light backgr. csi ? 5 h
18666 # RM DECSCNM screen dark backgr. csi ? 5 l
18667 # SM DECOM move within margins: csi ? 6 h
18668 # RM DECOM move outside margins: csi ? 6 l
18669 # SM DECAWM auto right margin: csi ? 7 h
18670 # RM DECAWM auto right margin: csi ? 7 l
18671 # SM DECARM auto repeat: csi ? 8 h
18672 # RM DECARM auto repeat: csi ? 8 l
18673 # DECSASD Select active main: csi 0 $ }
18674 # DECSASD Select active status: csi 1 $ }
18675 # DECSSDT Select status none: csi 0 $ ~
18676 # DECSSDT Select status indic.: csi 1 $ ~
18677 # DECSSDT Select status host-wr: csi 2 $ ~
18678 # SM DECTCEM Visible cursor: csi ? 2 5 h
18679 # RM DECTCEM Invisible cursor: csi ? 2 5 l
18680 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
18681 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
18682 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
18683 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
18684 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
18685 # Char. and Line attributes: csi Ps ... Ps m
18686 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18687 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18688 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
18689 bq300-8|Bull vt320 full 8 bits 80 columns,
18690 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
18691 cols#80, it#8, lines#24, vt#3, wsl#80,
18692 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18693 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
18694 clear=\233H\233J, cnorm=\233?25h, cr=^M,
18695 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
18696 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
18697 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
18698 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
18699 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
18700 el=\233K, el1=\2331K, enacs=\E(B\E)0,
18701 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
18702 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
18703 ind=\ED, is1=\E[63;2"p\E[2h,
18704 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18705 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
18706 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
18707 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18708 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
18709 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
18710 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
18711 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
18712 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
18713 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
18714 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
18715 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
18716 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
18717 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
18718 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
18719 s0ds=\E(B, s1ds=\E(0, sc=\E7,
18720 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
18721 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
18722 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
18723 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
18724 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
18725 flash=\233?5l$<50>\233?5h,
18726 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18728 bq300-8w|Bull vt320 8-bit 132 columns,
18730 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18731 rs2=\233?3h, use=bq300-8,
18732 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
18734 flash=\233?5l$<50>\233?5h,
18735 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18736 rs2=\233?3h, use=bq300-8,
18738 # This entry is used for terminals with vt320 emulation mode
18739 # a 102 keys keyboard (PC scancode !) and following set-up :
18740 # 8 bit ISO Latin Character Set (ISO 8859-1),
18741 # 7 bit Control Characters,
18742 # 80 columns screen.
18743 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
18744 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
18745 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
18746 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
18747 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
18748 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
18749 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
18750 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
18751 flash=\E[?5l$<50>\E[?5h,
18752 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18754 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
18756 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18757 rs2=\E[?3h, use=bq300-pc,
18758 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
18760 flash=\E[?5l$<50>\E[?5h,
18761 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
18762 rs2=\E[?3h, use=bq300-pc,
18763 # 8 bit ISO Latin Character Set (ISO 8859-1),
18764 # 8 bit Control Characters,
18765 # 80 columns screen.
18766 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18767 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18768 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18769 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18770 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18771 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18772 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18773 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18774 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18775 flash=\E[?5l$<50>\E[?5h,
18776 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18778 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18780 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18781 rs2=\E[?3h, use=bq300-8-pc,
18782 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18784 flash=\E[?5l$<50>\E[?5h,
18785 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18786 rs2=\E[?3h, use=bq300-8-pc,
18788 #======================================================#
18789 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18790 #======================================================#
18792 # normal mode, 8 bits, 80 columns terminal.
18794 # RIS reset initial state: ^[c
18795 # BLE bell enable ^[h
18796 # BLD bell disable ^[g
18797 # CAMS char. attr. mode set ^[[D
18798 # CAMR char. attr. mode reset ^[[G
18800 # KBU keyboard unlock (set) ^[[W
18801 # KBL keyboard lock (reset) ^[[X
18802 # CM character mode (async.) ^[k
18803 # NEP non echoplex mode (by host) ^[l
18804 # EP echoplex mode (by host) ^[m
18805 # IM insert mode set ^[[I
18806 # IM insert mode reset ^[[J
18807 # RMS roll mode set ^[r
18808 # RMR roll mode reset ^[q
18809 # SM78 set mode vip7800 ^[[1q
18810 # SD scroll up (72 lines) ^[[0s
18811 # SD scroll down (72 lines) ^[[1s
18812 # RBM block mode reset ^[[E
18813 # SLS status line set ^[w
18814 # SLR status line reset ^[v
18815 # SLL status line lock ^[O
18816 # LGS Line-graphic mode set ^[G
18817 # LGR Line-graphic mode reset ^[F
18818 # TBC tab clear (at cursor pos.) ^[[g
18819 # TBI tab initialize ^[[N
18820 # TBS tab set (at cursor pos.) ^[p
18821 # PDS print data space ^[[0p
18822 # PHD print host data ^[[3p
18823 # PDT print data terminator ^[[<p
18824 # PRES print adapter reset ^[[2p
18825 # SSPR multi-part. reset ^[[<>u
18826 # SSP0 partition 0 set ^[[00u
18827 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18828 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18829 # SSP3 partition n format 3 ^[[PnPnu
18830 # ATR attribute (visual)
18833 # hide (blank) : ^[sH
18835 # inverse video : ^[sI
18840 # This covers the vip7800 and BQ3155-vip7800
18841 vip|Bull Questar 3155-7800,
18842 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18843 cols#80, it#8, lines#24, vt#3, wsl#80,
18844 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18845 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18846 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18847 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18848 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18849 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18850 is2=\E[00u\E[<>001001024080024080u\E[01u,
18851 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18852 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18853 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18854 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18855 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18856 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18857 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18858 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18859 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18860 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18861 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18862 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18863 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18864 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18865 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18866 smul=\Es_, tbc=\E[N, tsl=\Ew,
18867 # normal screen, 8 bits, 132 columns terminal.
18868 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18870 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18871 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18873 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18874 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18875 cols#132, lines#72, wsl#132,
18876 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18881 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18882 # that is smaller than the screen, and puts up a warning message
18883 # outside the window. Te erases the warning message, puts the
18884 # window back to be the whole screen, and puts the cursor at just
18885 # below the small window. I defined <cnorm> and <civis> to really turn
18886 # the cursor on and off, but I have taken this out since I don't
18887 # like the cursor being turned off when vi exits.
18888 cg7900|chromatics|chromatics 7900,
18891 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18892 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18893 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18894 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18895 rmso=\001C1\,\001c2\,,
18896 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18897 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18899 #### Computer Automation
18902 ca22851|computer automation 22851,
18905 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18906 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18907 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18912 # This entry has correct padding and the undocumented "ri" capability
18913 cyb83|xl83|cybernex xl-83,
18916 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18917 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18918 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18919 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18920 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18921 cyb110|mdl110|cybernex mdl-110,
18924 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18925 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18926 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18927 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18928 ht=\011$<43>, ich1=\016A\035$<3.5>,
18929 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18933 # Datapoint is gone. They used to be headquartered in Texas.
18934 # They created ARCnet, an Ethernet competitor that flourished for a while
18935 # in the early 1980s before 3COM got wise and cut its prices. The service
18936 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18939 dp3360|datapoint|datapoint 3360,
18942 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18943 ed=^_, el=^^, home=^], ind=^J,
18945 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18946 # The Datapoint 8242 Workstation was sold at least between 1985
18947 # and 1989. To make the terminal work with this entry, press
18948 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18949 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18950 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18951 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18952 # fact unusable because the strings sent by the terminal conflict
18953 # with other keys).
18954 # The terminal is capable of displaying "box draw" characters.
18955 # For each graphic character you must send 2 ESC's (\E\E) followed
18956 # by a control character as follows:
18957 # character meaning
18958 # ========= =======
18961 # ctrl-G bottom tee
18964 # ctrl-J top left corner
18965 # ctrl-K top right corner
18966 # ctrl-L bottom left corner
18967 # ctrl-M bottom right corner
18968 # ctrl-N horizontal line
18969 # ctrl-O vertical line
18970 # Unfortunately this cannot be fitted into the termcap/terminfo
18971 # description scheme.
18972 dp8242|datapoint 8242,
18975 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18976 cr=^M, cub1=^H, cud1=^J,
18977 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18978 home=^U, ht=^I, il1=\E^T, ind=^C,
18979 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18980 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18981 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18982 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18983 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18984 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18985 smso=\E^E, smul=\E^F,
18986 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18988 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18990 # These entries are DEC's official terminfos for its older terminals.
18991 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18992 # Engineering for more information. Updated terminfos and termcaps
18993 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18999 bel=^G, cr=^M, cub1=^H, cud1=^J,
19003 bel=^G, cr=^M, cub1=^H, cud1=^J,
19007 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19008 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19012 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19013 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19014 el=\EK, ht=^I, ind=^J, ri=\EI,
19015 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19016 vt61|vt-61|vt61.5|dec vt61,
19018 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19019 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19020 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19021 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19024 # The gigi does standout with red!
19025 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19026 gigi|vk100|dec gigi graphics terminal,
19029 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19030 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19031 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19032 el=\E[K, ht=^I, ind=^J,
19033 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19034 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19035 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19036 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19037 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19040 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19041 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19042 # grossly-overpriced failure (among other things, DEC's OS didn't include
19043 # a format program, so you had to buy pre-formatted floppies from DEC at
19044 # a hefty premium!).
19045 pro350|decpro|dec pro console,
19047 cols#80, it#8, lines#24,
19048 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19049 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19050 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19051 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19052 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19053 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19054 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19059 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19060 dw2|decwriter|dw|decwriter II,
19063 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19064 # \E(B Use U.S. character set (otherwise # => british pound !)
19065 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19066 # \E[w 10 char/in pitch
19067 # \E[1;132 full width horizontal margins
19068 # \E[2g clear all tab stops
19070 # \E[66t 66 lines/page (for \f)
19071 # \E[1;66r full vertical page can be printed
19072 # \E[4g clear vertical tab stops
19073 # \E> disable alternate keypad mode (so it transmits numbers!)
19074 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19075 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19078 # The dw3 does standout with wide characters.
19080 dw3|la120|decwriter III,
19083 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19084 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19085 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19086 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19090 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19091 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19093 # These aren't official
19094 ln03|dec ln03 laser printer,
19097 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19098 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19100 ln03-w|dec ln03 laser printer 132 cols,
19102 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19103 kcud1=^J, nel=^M^J, use=ln03,
19105 #### Delta Data (dd)
19108 # Untested. The cup sequence is hairy enough that it probably needs work.
19109 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19110 # There are BSD-derived termcap entries floating around for this puppy
19111 # that are *certainly* wrong.
19112 delta|dd5000|delta data 5000,
19115 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19116 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19117 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19119 #### Digital Data Research (ddr)
19122 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19123 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19125 cols#80, it#8, lines#24, vt#3,
19126 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19127 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19128 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19129 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19130 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19131 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19132 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19133 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19134 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19135 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19136 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19139 #### Evans & Sutherland
19142 # Jon Leech <leech@cs.unc.edu> tells us:
19143 # The ps300 was the Evans & Sutherland Picture System 300, a high
19144 # performance 3D vector graphics system with a bunch of specialized hardware.
19145 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19146 # evolutions including (limited) color versions such as the PS330C. PS300s
19147 # were effectively obsolete by the late 80s, replaced by raster graphics
19148 # systems, although specialized applications like molecular modelling
19149 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19150 # are out of production, though of course E&S is very much alive (in 1996).
19151 # (ps300: changed ":pt@:" to "it@" -- esr)
19153 ps300|Picture System 300,
19156 rmso@, rmul@, smso@, smul@, use=vt100,
19158 #### General Electric (ge)
19161 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19164 bel=^G, cr=^M, cud1=^J, ind=^J,
19166 #### Heathkit/Zenith
19169 # Here is a description of the H19 DIP switches:
19172 # 0-3 = baud rate as follows:
19177 # 0 1 0 1 1200 baud
19178 # 1 0 0 0 2400 baud
19179 # 1 0 1 0 4800 baud
19180 # 1 1 0 0 9600 baud
19181 # 1 1 0 1 19.2K baud
19183 # 4 = parity (0 = no parity)
19184 # 5 = even parity (0 = odd parity)
19185 # 6 = stick parity (0 = normal parity)
19186 # 7 = full duplex (0 = half duplex)
19189 # 0 = block cursor (0 = underscore cursor)
19190 # 1 = no key click (0 = keyclick)
19191 # 2 = wrap at end of line (0 = no wrap)
19192 # 3 = auto LF on CR (0 = no LF on CR)
19193 # 4 = auto CR on LF (0 = no CR on LF)
19194 # 5 = ANSI mode (0 = VT52 mode)
19195 # 6 = keypad shifted (0 = keypad unshifted)
19196 # 7 = 50Hz refresh (1 = 60Hz refresh)
19198 # Factory Default settings are as follows:
19200 # S401 1 0 0 0 1 1 0 0
19201 # S402 0 0 0 0 0 0 0 0
19202 # (h19: I added <rmam>/<smam> based on the init string;
19203 # also added empty <acsc> to suppress a tic warning -- esr)
19204 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19205 OTbs, am, mir, msgr,
19206 cols#80, it#8, lines#24,
19207 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19208 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19209 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19210 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19211 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19212 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19213 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19214 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19215 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19216 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19217 h19-bs|heathkit w/keypad shifted,
19218 rmkx=\Eu, smkx=\Et, use=h19-b,
19219 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19220 rmkx=\Eu, smkx=\Et, use=h19-u,
19221 # (h19: merged in <ip> from BSDI hp19-e entry>;
19222 # also added empty <acsc> to suppress a tic warning --esr)
19223 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19224 # Tim tells us that:
19225 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19226 # This terminal suffers from the same famous insert-mode padding lossage
19227 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19228 # unusable on this box, since even a half-scroll up or down the window
19229 # causes flaming terminal death.
19231 # On the Z19, the only way I have found around this problem is to remove
19232 # the :al: and :dl: entries entirely. No amount of extra padding will
19233 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19234 # makes Emacs a little slower, but it remains in the land of the living.
19236 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19237 OTbs, am, eslok, hs, mir, msgr,
19238 cols#80, it#8, lines#24,
19239 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19240 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19241 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19242 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19243 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19244 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19245 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19246 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19247 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19248 h19-u|heathkit with underscore cursor,
19249 cnorm@, cvvis@, use=h19-b,
19250 h19-g|h19g|heathkit w/block cursor,
19251 cnorm=\Ex4, cvvis@, use=h19-b,
19252 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19254 dl1=\EM, il1=\EL, use=h19,
19256 # The major problem with the Z29 is that it requires more padding than the Z19.
19258 # The problem with declaring an H19 to be synonymous with a Z29 is that
19259 # it needs more padding. It especially loses if a program attempts
19260 # to put the Z29 into insert mode and insert text at 9600 baud. It
19261 # even loses worse if the program attempts to insert tabs at 9600
19262 # baud. Adding padding to text that is inserted loses because in
19263 # order to make the Z29 not die, one must add so much padding that
19264 # whenever the program tries to use insert mode, the effective
19265 # rate is about 110 baud.
19267 # What program would want to put the terminal into insert mode
19268 # and shove stuff at it at 9600 baud you ask?
19270 # Emacs. Emacs seems to want to do the mathematically optimal
19271 # thing in doing a redisplay rather than the practical thing.
19272 # When it is about to output a line on top of a line that is
19273 # already on the screen, instead of just killing to the end of
19274 # the line and outputting the new line, it compares the old line
19275 # and the new line and if there are any similarities, it
19276 # constructs the new line by deleting the text on the old line
19277 # on the terminal that is already there and then inserting new
19278 # text into the line to transform it into the new line that is
19279 # to be displayed. The Z29 does not react kindly to this.
19281 # But don't cry for too long.... There is a solution. You can make
19282 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19283 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19284 # line will be really slow", you say. Well there is a sort of a
19285 # solution to that too. There is an insert character option on
19286 # the Z29 that will insert one character. Unfortunately, it
19287 # involves putting the terminal into ansi mode, inserting the
19288 # character, and changing it back to H19 mode. All this takes 12
19289 # characters. Pretty expensive to insert one character, but it
19290 # works. Either Emacs doesn't try to use its inserting hack when
19291 # it's only given an insert character ability or the Z29 doesn't
19292 # require padding with this (the former is probably more likely,
19293 # but I haven't checked it out).
19294 # (z29: added empty <acsc> to suppress a tic warning, merged in
19295 # status line capabilities from BRL entry --esr)
19296 z29|zenith29|z29b|zenith z29b,
19297 OTbs, OTpt, am, eslok, hs, mir, msgr,
19298 OTkn#10, cols#80, lines#24,
19299 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19300 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19301 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19302 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19303 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19304 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19305 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19306 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19307 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19308 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19309 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19310 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19311 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19312 # the world is stable. <rs1> causes the terminal to be reset to the state
19313 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19314 # cursor, bc -> block cursor.
19315 # From: Mike Meyers
19316 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19317 # looks vt100-compatible -- esr)
19318 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19319 OTbs, OTpt, am, eslok, hs, mir, msgr,
19320 OTkn#10, cols#80, it#8, lines#24,
19321 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19322 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19323 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19324 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19325 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19326 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19327 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19328 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19329 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19330 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19331 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19332 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19333 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19334 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19335 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19336 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19337 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19338 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19340 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19341 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19343 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19344 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19346 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19347 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19348 am, eslok, hs, mc5i, mir, msgr, xon,
19350 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19351 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19352 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19353 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19354 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19355 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19356 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19357 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19358 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19359 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19360 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19361 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19362 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19363 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19364 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19365 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19366 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19367 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19368 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19370 # From: Brad Brahms <Brahms@USC-ECLC>
19371 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19372 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19373 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19374 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19375 OTbs, OTpt, mir, msgr,
19376 OTkn#10, cols#80, it#8, lines#24,
19377 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19378 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19379 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19380 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19381 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19382 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19383 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19384 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19385 smir=\E@, smso=\Ep,
19386 p19|h19-b with il1/dl1,
19387 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19388 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19389 # (ztx: removed duplicate :sr: -- esr)
19390 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19391 OTbs, am, eslok, hs,
19392 cols#80, it#8, lines#24,
19393 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19394 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19395 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19396 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19397 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19398 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19399 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19400 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19402 #### IMS International (ims)
19404 # There was a company called IMS International located in Carson City,
19405 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19406 # bus/Z80 hardware and a line of terminals called Ultimas.
19409 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19410 ims950-b|bare ims950 no init string,
19412 # (ims950: removed obsolete ":ko@:" -- esr)
19413 ims950|ims televideo 950 emulation,
19415 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19416 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19417 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19418 ims950-rv|ims tvi950 rev video,
19420 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19421 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19422 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19424 cols#80, it#8, lines#24,
19425 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19426 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19427 ht=^I, if=/usr/share/tabset/vt100,
19428 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19429 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19430 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19433 #### Intertec Data Systems
19435 # I think this company is long dead as of 1995. They made an early CP/M
19436 # micro called the "Intertec Superbrain" that was moderately popular,
19437 # then sank out of sight.
19440 superbrain|intertec superbrain,
19443 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19444 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19445 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19446 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19447 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19448 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19449 # and the reverse is actually true. Try it. -- esr)
19450 intertube|intertec|Intertec InterTube,
19453 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19454 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19455 ind=^J, rmso=\E0@, smso=\E0P,
19456 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19457 # are typing and a command comes in, the keystrokes you type get interspersed
19458 # with the command and it messes up
19459 intertube2|intertec data systems intertube 2,
19461 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19462 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19463 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19465 #### Ithaca Intersystems
19467 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19468 # past. They used to be reachable at:
19470 # Ithaca Intersystems
19471 # 1650 Hanshaw Road
19472 # Ithaca, New York 14850
19474 # However, the outfit went bankrupt years ago.
19477 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19478 # These entries were written (originally in termcap syntax) by Brian Yandell
19479 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19480 # University of Wisconsin.
19482 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19483 # removed <if=/usr/share/tabset/init.graphos> and
19484 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19485 graphos|graphos III,
19487 cols#80, it#8, lines#24,
19488 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19489 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19490 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19491 cuu=\E[%p1%dA, cuu1=\E[A,
19492 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19493 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19494 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19495 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19496 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19497 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19498 smir=\E[4h, smso=\E[7m,
19499 graphos-30|graphos III with 30 lines,
19501 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19505 # These people used to be reachable at:
19508 # 1393 Main Street,
19509 # Waltham, MA 02154
19510 # Vox: (617)-890-5796.
19512 # However, if you call that number today you'll get an insurance company.
19513 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19514 # 26 Feb 1997 that says:
19516 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19517 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19518 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19519 # panel-mount etc). I can be emailed at sonfour@aol.com
19521 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19522 # dated 1984. According to the manual, it featured Tek 4010/4014
19523 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19526 modgraph|mod24|modgraph terminal emulating vt100,
19529 cvvis=\E\^9;0s\E\^7;1s,
19530 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19531 rf@, ri=\EM\E[K$<5/>, use=vt100,
19532 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19533 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19535 cols#80, it#8, lines#24,
19536 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19537 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19538 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19539 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19542 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19543 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19544 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19545 # mark and using delete-to-killbuffer work correctly. However, we would
19546 # like normal mode of operation to be using a Modgraph with 48 line setting.
19547 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19548 # the setting mark and delete-to-killbuffer results in the deletion of only
19549 # the line the mark is set on.
19550 # We've discovered that the delete-to-killbuffer works correctly
19551 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19552 # the first line disappears but a ctrl-l shows that it did work
19554 modgraph48|mod|Modgraph w/48 lines,
19555 OTbs, OTpt, am, xenl,
19556 cols#80, it#8, lines#48, vt#3,
19557 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19558 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19559 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19560 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19561 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19562 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19563 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19564 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19565 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19566 smso=\E[7m, smul=\E[4m,
19568 #### Morrow Designs
19570 # This was George Morrow's company. They started in the late 1970s making
19571 # S100-bus machines. They used to be reachable at:
19574 # 600 McCormick St.
19575 # San Leandro, CA 94577
19577 # but they're long gone now (1995).
19580 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19581 # Jeff's specimen was dated June 1984.
19582 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19583 mt70|mt-70|Morrow MD-70; native Morrow mode,
19584 am, mir, msgr, xon,
19585 cols#80, it#8, lines#24,
19586 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19587 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
19588 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
19589 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
19590 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
19591 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
19592 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
19593 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
19594 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
19595 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
19596 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19597 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
19598 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
19599 smul=\EG1, tbc=\E0, use=adm+sgr,
19604 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
19606 ex155|Motorola Exorterm 155,
19608 OTkn#5, OTug#1, cols#80, lines#24,
19609 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
19610 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
19611 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
19612 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
19613 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
19617 # This company is still around in 1995, manufacturing point-of-sale systems.
19619 omron|Omron 8025AG,
19622 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
19623 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
19624 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
19628 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
19629 # were competition for things like the Tektronics 4025.
19632 # Ramtek 6221 from BRL, probably by Doug Gwyn
19633 # The following SET-UP modes are assumed for normal operation:
19634 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
19635 # NEWLINE_OFF 80_COLUMNS
19636 # Other SET-UP modes may be set for operator convenience or communication
19637 # requirements; I recommend
19638 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
19639 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
19640 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
19641 # Note that the Control-E key is useless on this brain-damaged terminal. No
19642 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
19643 rt6221|Ramtek 6221 80x24,
19644 OTbs, OTpt, msgr, xon,
19645 OTkn#4, cols#80, it#8, lines#24, vt#3,
19646 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
19647 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
19648 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19649 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
19650 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
19651 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
19652 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19653 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
19654 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
19655 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
19656 rmso=\E[m, rmul=\E[m,
19657 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
19658 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
19659 smul=\E[4m, tbc=\E[3g,
19660 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
19661 rt6221-w|Ramtek 6221 160x48,
19662 cols#160, lines#48,
19663 ll=\E[48;1H, use=rt6221,
19668 # RCA VP3301 or VP3501
19669 rca|rca vp3301/vp3501,
19672 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19673 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
19679 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
19680 # The following SET-UP modes are assumed for normal operation:
19681 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
19682 # ONLINE ANSI CURSOR_VISIBLE
19683 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
19684 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
19685 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
19686 # For use with graphics software, all graphics modes should be set to factory
19687 # default. Other SET-UP modes may be set for operator convenience or
19688 # communication requirements. No delays are specified; use "stty ixon -ixany"
19689 # to enable DC3/DC1 flow control!
19690 # I commented out the scrolling capabilities since they are too slow.
19691 hirez100|Selanar HiREZ-100,
19692 OTbs, OTpt, mir, msgr, xon,
19693 OTkn#4, cols#80, it#8, lines#48, vt#3,
19694 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
19695 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19696 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19697 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
19698 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19699 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
19700 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
19701 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
19702 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
19703 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
19704 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19705 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
19706 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
19707 smul=\E[4m, tbc=\E[3g,
19708 hirez100-w|Selanar HiREZ-100 in 132-column mode,
19709 cols#132, use=hirez100,
19714 # From University of Wisconsin
19715 vsc|Signetics Vsc Video driver by RMC,
19717 cols#80, it#8, lines#26,
19718 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
19719 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19720 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
19721 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
19725 # Alan Frisbie <frisbie@flying-disk.com> writes:
19727 # As you may recall, the Soroc logo consisted of their name,
19728 # with the letter "S" superimposed over an odd design. This
19729 # consisted of a circle with a slightly smaller 15 degree (approx.)
19730 # wedge with rounded corners inside it. The color was sort of
19731 # a metallic gold/yellow.
19733 # If I had been more of a beer drinker it might have been obvious
19734 # to me, but it took a clue from their service department to make
19735 # me exclaim, "Of course!" The circular object was the top of
19736 # a beer can (the old removable pop-top style) and "Soroc" was an
19737 # anagram for "Coors".
19739 # I can just imagine the founders of the company sitting around
19740 # one evening, tossing back a few and trying to decide what to
19741 # call their new company and what to use for a logo.
19744 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
19745 soroc120|iq120|soroc|soroc iq120,
19746 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
19747 kcuf1=^L, kcuu1=^K, use=adm3a,
19748 soroc140|iq140|soroc iq140,
19751 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19752 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
19753 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
19754 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
19755 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
19756 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
19757 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
19759 #### Southwest Technical Products
19761 # These guys made an early personal micro called the M6800.
19762 # The ct82 was probably its console terminal.
19765 # (swtp: removed obsolete ":bc=^D:" -- esr)
19766 swtp|ct82|southwest technical products ct82,
19769 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19770 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19771 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19772 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19773 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19777 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19779 # Synertek used to make ICs, various 6502-based single-board process
19780 # control and hobbyist computers, and assorted peripherals including a
19781 # series of small inexpensive terminals (I think they were one of the
19782 # first to have a "terminal-on-a-keyboard", where the terminal itself
19783 # was only slightly larger than the keyboard).
19785 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19786 # was a 40x24 terminal that could connect to a standard TV through a
19787 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19788 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19789 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19790 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19791 # ROM and 2 ROMs as character generators. They were incredibly simple,
19792 # and I've never had any problems with mine (witness the fact that mine
19793 # was made in 1981 and is still working great... I've blown the video
19794 # output transistor a couple of times, but it's a 2N2222 :-)
19796 # The KTM-3 (which is what is listed in the terminfo file) was their
19797 # attempt at putting a KTM-2 in a box (and some models came with a
19798 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19799 # control and escape sequences are very different. The KTM-3 was always
19800 # real broken, at least according to the folks I've talked to about it.
19802 # The padding in the entry is probably off--these terminals were very
19803 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19804 # anyone with any sanity replaced the ROMs with something that provided
19805 # a reasonable subset of VT100 functionality, since the usual ROMs were
19806 # obviously very primitive... oh, you could get an upgraded ROM from
19807 # Synertek for some incredible amount of money, but what hacker with an
19808 # EPROM burner would do that? :)
19810 # Sorry I don't have any contact info; I believe they were located in
19811 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19812 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19813 # business these days.
19816 # Tested, seems to work fine with vi.
19817 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19820 clear=^Z, cub1=^H, cuf1=^L,
19821 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19823 #### Tab Office Products
19825 # TAB Products Co. - Palo Alto, California
19826 # Electronic Office Products,
19827 # 1451 California Avenue 94304
19829 # I think they're out of business.
19832 # The tab 132 uses xon/xoff, so no padding needed.
19833 # <smkx>/<rmkx> have nothing to do with arrow keys.
19834 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19835 # Seems to be no way to get rid of status line.
19836 # The manual for this puppy was dated June 1981. It claims to be VT52-
19837 # compatible but looks more vt100-like.
19838 tab132|tab|tab132-15|tab 132/15,
19840 OTdN@, cols#80, lines#24, lm#96,
19841 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19842 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19843 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19844 tab132-w|tab132 in wide mode,
19846 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19847 tab132-rv|tab132 in reverse-video mode,
19848 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19849 tab132-w-rv|tab132 in reverse-video/wide mode,
19850 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19855 # Research Incorporated
19856 # 6425 Flying Cloud Drive
19857 # Eden Prairie, MN 55344
19858 # Vox: (612)-941-3300
19860 # The Teleray terminals were all discontinued in 1992-93. RI still services
19861 # and repairs these beasts, but no longer manufactures them. The Teleray
19862 # people believe that all the types listed below are very rare now (1995).
19863 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19864 # Model 100) that were ANSI-compatible.
19866 # Note two things called "teleray". Reorder should move the common one
19867 # to the front if you have either. A dumb teleray with the cursor stuck
19868 # on the bottom and no obvious model number is probably a 3700.
19871 t3700|dumb teleray 3700,
19874 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19875 t3800|teleray 3800 series,
19877 cols#80, it#8, lines#24,
19878 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19879 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19880 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19881 t1061|teleray|teleray 1061,
19882 OTbs, am, km, xhp, xt,
19883 cols#80, it#8, lines#24, xmc#1,
19884 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19885 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19886 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19887 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19888 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19889 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19890 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19892 t1061f|teleray 1061 with fast PROMs,
19893 dl1=\EM, il1=\EL, ip@, use=t1061,
19894 # "Teleray Arpa Special", officially designated as
19895 # "Teleray Arpa network model 10" with "Special feature 720".
19896 # This is the new (1981) fast microcode updating the older "arpa" proms
19897 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19898 # converts the keypad to programmable function keys, and has other goodies.
19899 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19900 # programs handle such lossage properly.
19901 # Note: this is NOT the old termcap's "t1061f with fast proms."
19902 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19903 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19904 t10|teleray 10 special,
19906 cols#80, it#8, lines#24, xmc#2,
19907 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
19908 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19909 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19910 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19912 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19913 # back/forth words. Put the function keys (f1-f10) where they can be
19914 # found, and turn off the other magic keys along the top row, except
19915 # for line/local. Do the magic appropriate to make the page shifts work.
19916 # Also toggle ^S/^Q for those of us who use Emacs.
19918 am, da, db, mir, xhp, xt,
19920 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19921 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19922 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19923 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19924 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19925 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19926 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19927 smso=\E[7m, smul=\E[4m,
19929 #### Texas Instruments (ti)
19932 # The Silent 700 was so called because it was built around a quiet thermal
19933 # printer. It was portable, equipped with an acoustic coupler, and pretty
19934 # neat for its day.
19935 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19938 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19941 # Texas Instruments 916 VDT 7 bit control mode
19943 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19945 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19946 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19947 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19948 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19949 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19950 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19951 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19952 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19953 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19954 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19955 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19956 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19957 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19958 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19961 # Texas Instruments 916 VDT 8 bit control mode
19963 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19964 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19965 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19966 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19967 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19968 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19969 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19971 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19973 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19974 cols#132, use=ti916,
19976 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19978 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19979 cols#132, use=ti916-8,
19980 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19982 cols#80, it#8, lines#24,
19983 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19984 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19985 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19986 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19987 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19988 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19989 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19990 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19991 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19992 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19993 smul=\E[4m, tbc=\E[3g,
19994 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19996 cols#80, it#8, lines#24,
19997 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19998 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19999 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20000 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20001 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20002 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20003 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
20004 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
20005 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
20006 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
20007 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20008 smul=\E[4m, tbc=\E[3g,
20009 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20010 cols#132, use=ti924,
20011 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20012 cols#132, use=ti924-8,
20013 ti931|Texas Instruments 931 VDT,
20016 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20017 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20018 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20019 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20020 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20021 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20022 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20023 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20024 sgr0=\E4@, smso=\E4A, smul=\E4D,
20025 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20026 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20027 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20028 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20029 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20030 ti_ansi|basic entry for ti928,
20031 am, bce, eo, xenl, xon,
20032 colors#8, cols#80, it#8, lines#25, pairs#64,
20033 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20034 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20035 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20036 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20037 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20038 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20039 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20040 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20041 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20042 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20043 smso=\E[7m, smul=\E[4m,
20045 # 928 VDT 7 bit control mode
20047 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20048 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20049 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20050 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20051 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20052 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20054 # 928 VDT 8 bit control mode
20056 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20057 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20058 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20059 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20060 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20061 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20062 kpp=\233T, kprt=\23335~, use=ti_ansi,
20067 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20068 # had just <smso>=\EG6 which I think means standout was supposed to be
20069 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20070 # <invis> might work-- esr)
20071 zen30|z30|zentec 30,
20074 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20075 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20076 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20077 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20078 smul@, use=adm+sgr,
20079 # (zen50: this had extension capabilities
20080 # :BS=^U:CL=^V:CR=^B:
20081 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20082 # which were also in the original entry -- esr)
20083 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20084 zen50|z50|zentec zephyr,
20086 cols#80, lines#24, xmc#1,
20087 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20088 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20089 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20090 rmul@, smul@, use=adm+sgr,
20092 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20093 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20096 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20097 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20098 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20099 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20100 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20101 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20102 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20103 smso=\EM$, smul=\EM0,
20105 ######## OBSOLETE UNIX CONSOLES
20108 #### Apollo consoles
20110 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20111 # labeled HP700s now.
20114 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20115 apollo|apollo console,
20118 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20119 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20120 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20121 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20122 smso=\ES, smul=\EU, vpa=\EO+\s,
20124 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20125 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20126 # both these capabilities.
20127 apollo_15P|apollo 15 inch display,
20128 rmir@, smir@, use=vt132,
20129 apollo_19L|apollo 19 inch display,
20130 rmir@, smir@, use=vt132,
20131 apollo_color|apollo color display,
20132 rmir@, smir@, use=vt132,
20134 #### Convergent Technology
20136 # Burroughs bought Convergent shortly before it merged with Univac.
20137 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20138 # from 1991 or earlier).
20141 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20142 # (aws: removed unknown :dn=^K: -- esr)
20143 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20145 OTug#0, cols#80, lines#28, xmc#0,
20146 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20147 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20148 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20149 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20150 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20151 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20153 awsc|Convergent Technologies AWS workstation under CTOS,
20155 OTug#0, cols#80, lines#24, xmc#0,
20156 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20157 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20158 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20159 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20165 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20166 # The digital uVax II's had a graphic display called a qdss. It was
20167 # supposed to be a high performance graphic accelerator, but it was
20168 # late to market and barely appeared before faster dumb frame buffers
20169 # appeared. I have only used this display while running X11. However,
20170 # during bootup, it was in text mode, and probably had a terminal emulator
20171 # within it. And that is what your termcap entry is for. In graphics
20172 # mode the screen size is 1024x864 pixels.
20173 qdss|qdcons|qdss glass tty,
20175 cols#128, lines#57,
20176 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20177 cup=\E=%p1%c%p2%c, cuu1=^K,
20179 #### Fortune Systems consoles
20181 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20182 # in their day; I (esr) used one myself for a year or so around 1984.
20183 # They had no graphics, though, and couldn't compete against Suns and
20187 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20188 # (This had extension capabilities
20189 # :rv=\EH:re=\EI:rg=0:GG=0:\
20190 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20191 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20192 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20193 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20194 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20195 # to force both magic cookie glitches off. Once upon a time, I
20196 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20197 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20198 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20199 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20200 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20201 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20202 fos|fortune|Fortune system,
20205 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20206 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20207 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20208 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20209 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20210 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20211 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20212 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20213 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20214 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20215 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20216 smso=^\H`, smul=^\HP,
20218 #### Masscomp consoles
20220 # Masscomp has gone out of business. Their product line was purchased by
20221 # comany in Georgia (US) called "XS International", parts and service may
20222 # still be available through them.
20225 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20226 masscomp|masscomp workstation console,
20228 cols#80, it#8, lines#24,
20229 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20230 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20231 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20232 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20233 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20234 masscomp1|masscomp large screen version 1,
20235 cols#104, lines#36, use=masscomp,
20236 masscomp2|masscomp large screen version 2,
20237 cols#64, lines#21, use=masscomp,
20239 ######## OTHER OBSOLETE TYPES
20241 # These terminals are *long* dead -- these entries are retained for
20242 # historical interest only.
20245 #### Obsolete non-ANSI software emulations
20248 # CTRM terminal emulator
20249 # 1. underlining is not allowed with colors: first, is is simulated by
20250 # black on white, second, it disables background color manipulations.
20251 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20252 # so we have to save their status in the static registers A, B and H
20253 # respectively, to be able to restore them when color changes
20254 # (because any color change turns off ALL attributes)
20255 # 3. <bold> and <rev> sequences alternate modes,
20256 # rather than simply entering them. Thus we have to check the
20257 # static register B and H to determine the status, before sending the
20259 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20260 # and then reset colors
20261 # 5. implementation of the protect mode would badly penalize the performance.
20262 # we would have to use \E&bn sequence to turn off colors (as well as all
20263 # other attributes), and keep the status of protect mode in yet another
20264 # static variable. If someone really needs this mode, they would have to
20265 # create another terminfo entry.
20266 # 6. original color-pair is white on black.
20267 # store the information about colors into static registers
20268 # 7. set foreground color. it performs the following steps.
20269 # 1) turn off all attributes
20270 # 2) turn on the background and video attributes that have been turned
20271 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20272 # 3) turn on foreground attributes
20273 # 4) store information about foreground into U,V,W static registers
20274 # 8. turn on background: similar to turn on foreground above
20275 ctrm|C terminal emulator,
20277 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20278 pairs#63, pb#19200, vt#6,
20279 bel=^G, blink=\E&dA%{1}%PA,
20280 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20281 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20282 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20283 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20284 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20285 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20286 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20287 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20288 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20289 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20290 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20291 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20292 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20293 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20294 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20296 # gs6300 - can't use blue foreground, it clashes with underline;
20297 # it's simulated with cyan
20298 # Bug: The <op> capability probably resets attributes.
20299 # (gs6300: commented out <rmln> (no <smln>) --esr)
20300 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20301 am, bce, msgr, xon,
20302 colors#8, cols#80, it#8, lines#24, pairs#63,
20303 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20304 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20305 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20306 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20307 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20308 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20309 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20310 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20311 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20312 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20313 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20314 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20315 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20316 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20318 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20319 # MS-Kermit with Heath-19 emulation mode enabled
20320 # (h19k: changed ":pt@:" to ":it@"
20321 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20326 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20327 # Software (formerly Peripherals Computers & Supplies, Inc) of
20328 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20329 # also be reached at support@synergy.com.
20330 versaterm|versaterm vt100 emulator for the macintosh,
20332 cols#80, it#8, lines#24,
20333 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20334 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20335 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20336 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20337 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20338 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20339 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20340 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20341 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20342 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20343 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20344 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20347 # From: Rick Thomas <ihnp4!btlunix!rbt>
20348 # (xtalk: I added <rmam>/<smam> based on the init string.
20349 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20350 am, mir, msgr, xon,
20351 cols#80, it#8, lines#24, vt#3, xmc#1,
20352 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20353 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
20354 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
20355 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
20356 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
20357 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
20358 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
20359 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
20360 rmkx=\E[?1l\E>, rmso=\E[m\s,
20361 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
20362 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
20363 tbc=\E[3g, use=vt100+fnkeys,
20365 # The official PC terminal emulator program of the AT&T Product Centers.
20366 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
20367 simterm|attpc running simterm,
20370 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
20371 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
20372 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
20373 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
20375 #### Daisy wheel printers
20377 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
20378 # wheel terminals. These are now largely obsolete.
20381 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
20382 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
20385 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
20386 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
20387 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
20389 is2=\r \E9, use=diablo1620,
20390 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
20391 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
20392 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
20394 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
20396 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
20398 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
20399 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
20401 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
20402 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
20403 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
20404 # If no tab is set or the terminal's in a bad mood, it glitches the screen
20405 # around all of memory. Note that return puts a blank ("a return character")
20406 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
20407 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
20408 # curses won't work (some old BSD versions) because it doesn't clear this bit,
20409 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
20410 # I have been unable to get tabs set in all 96 lines - it always leaves at
20411 # least one line with no tabs in it, and once you tab through that line,
20412 # it completely weirds out.
20413 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
20416 cols#80, lines#24, lm#96,
20417 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
20418 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
20419 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
20420 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
20421 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
20425 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20426 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20427 gsi|mystery gsi terminal,
20430 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
20432 aj830|aj832|aj|anderson jacobson,
20434 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
20436 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
20437 aj510|Anderson-Jacobson model 510,
20440 clear=^L, cub1=^H, cuf1=\EX,
20441 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
20442 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
20443 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
20444 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
20445 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
20447 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
20448 # This is incomplete, but it's a start.
20449 nec5520|nec|spinwriter|nec 5520,
20452 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
20453 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
20455 qume5|qume|Qume Sprint 5,
20458 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
20459 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
20460 # I suspect the xerox 1720 is the same as the diablo 1620.
20461 xerox1720|x1720|x1750|xerox 1720,
20464 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
20467 #### Miscellaneous obsolete terminals, manufacturers unknown
20469 # If you have any information about these (like, a manufacturer's name,
20470 # and a date on the serial-number plate) please send it!
20472 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
20475 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
20476 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
20479 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
20480 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
20481 kf4=\E8, rmso=\Em^C, smso=\Em^L,
20482 cops10|cops|cops-10|cops 10,
20485 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20486 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
20487 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
20489 # (d132: removed duplicate :ic=\E5:,
20490 # merged in capabilities from a BRL entry -- esr)
20491 d132|datagraphix|datagraphix 132a,
20494 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
20495 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
20496 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
20497 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
20498 # The d800 was an early portable terminal from c.1984-85 that looked a lot
20499 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
20500 # mode (which is what this entry looks like) and several other lesser-known
20503 OTbs, am, da, db, msgr, xhp,
20504 cols#80, it#8, lines#24,
20505 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20506 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
20507 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
20508 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
20509 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
20510 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
20511 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20512 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
20513 digilog|digilog 333,
20516 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
20518 # The DWK was a terminal manufactured in the Soviet Union c.1986
20519 dwk|dwk-vt|dwk terminal,
20521 cols#80, it#8, lines#24,
20522 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
20523 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20524 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
20525 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
20526 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
20527 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
20528 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
20529 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
20530 sgr0=\EX, smacs=\EF, smso=\ET,
20531 env230|envision230|envision 230 graphics terminal,
20533 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
20534 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
20535 sgr0=\E[0m$<2>, smacs@, use=vt100,
20536 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
20537 # coupler attached, the whole rig fitting in a suitcase and more or less
20538 # portable. Hot stuff for c.1977 :-) -- esr
20539 ep48|ep4080|execuport 4080,
20542 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
20543 ep40|ep4000|execuport 4000,
20544 cols#136, use=ep4080,
20545 # Adam Thompson <athompso@pangea.ca> tells us:
20546 # Informer series - these are all portable units, resembling older
20547 # automatic bread-baking machines. The terminal looks like a `clamshell'
20548 # design, but isn't. The structure is similar to the Direct terminals,
20549 # but only half the width. The entire unit is only about 10" wide.
20550 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
20551 # keyboard. All the keys are crammed together, much like some laptop
20552 # PCs today, but perhaps less well organized...all these units have a
20553 # bewildering array of plugs on the back, including a built-in modem.
20554 # The 305 was a color version of the 304; the 306 and 307 were mono and
20555 # color terminals built for IBM bisync protocols.
20556 # From: Paul Leondis <unllab@amber.berkeley.edu>
20557 ifmr|Informer D304,
20560 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
20561 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
20562 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
20564 # Entry largely based on wy60 and has the features of wy60ak.
20565 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
20566 am, bw, hs, km, mir, msgr, ul, xon,
20567 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
20568 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
20569 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
20570 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
20571 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
20572 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
20573 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
20575 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
20576 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
20577 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
20578 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
20579 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
20580 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
20581 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
20582 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
20583 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
20584 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
20585 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
20586 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
20587 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
20588 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
20589 rs3=\EwG\Ee($<150>,
20590 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
20591 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
20592 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
20593 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
20594 uc=\EG8\EG0, use=adm+sgr,
20595 teletec|Teletec Datascreen,
20598 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
20600 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
20601 # This description is for the LANPAR Technologies VISION 3220
20602 # terminal from 1984/85. The function key definitions k0-k5 represent the
20603 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
20604 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
20606 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
20607 # I had a couple of scopes (3221) like this once where I used to work, around
20608 # the 1987 time frame if memory serves me correctly. These scopes were made
20609 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
20610 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
20611 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
20612 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
20613 # (3221) cost about $1500 each, and one was always broken -- had to be sent
20614 # back to the shop for repairs.
20615 # The only real advantage these scopes had over the VT-240's were:
20616 # 1) They were faster in the Regis display, or at least the ones I did
20617 # 2) They had a handy debugging feature where you could split-screen the
20618 # scope, the graphics would appear on the top, and the REGIS commands would
20619 # appear on the bottom. I don't remember the VT-240s being able to do that.
20620 # I would swear that LANPAR Technologies was in MA someplace, but since I
20621 # don't work at the same place anymore, and those terminals and manuals were
20622 # long since junked, I cannot be any more sure than that.
20624 # (v3220: removed obsolete ":kn#10:",
20625 # I added <rmam>/<smam> based on the init string -- esr)
20626 v3220|LANPAR Vision II model 3220/3221/3222,
20627 OTbs, am, mir, xenl,
20628 cols#80, it#8, lines#24,
20629 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20630 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20631 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
20632 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
20633 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
20634 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
20635 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
20636 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20637 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
20638 ######## ICH/ICH1 VERSUS RMIR/SMIR
20640 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
20641 # are present; the symptom is doubled characters in an update using insert.
20642 # These applications are technically correct; in both 4.3BSD termcap and
20643 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
20644 # unless the terminal needs both. To my knowledge, no terminal still in this
20645 # file requires both other than the very obsolete dm2500.
20647 # For ncurses-based applications this is not a problem, as ncurses uses
20648 # one or the other as appropriate but never mixes the two. Therefore we
20649 # have not corrected entries like `linux' and `xterm' that specify both.
20650 # If you see doubled characters from these, use the linux-nic and xterm-nic
20651 # entries that suppress ich/ich1. And upgrade to ncurses!
20654 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
20656 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
20657 # ECMA-48 standards are said to be almost identical, but are not the same
20658 # as X3.64 (though for practical purposes they are close supersets of it).
20660 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
20661 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
20662 # Coded Character Sets"), include your snail-mail address, and you should
20663 # receive the document in due course. Don't expect an email acknowledgement.
20665 # Related standards include "X3.4-1977: American National Standard Code for
20666 # Information Interchange" (the ASCII standard) and "X3.41.1974:
20667 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
20668 # American National Standard for Information Interchange." I believe (but
20669 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
20673 #### VT100/ANSI/ECMA-48
20675 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
20676 # and ECMA-48 Control Functions for Coded Character Sets.
20678 # Much of the content of this comment is adapted from a table prepared by
20679 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
20680 # discussion of some terminfo-related issues, and updates to capture ECMA-48
20681 # have been added. Control functions described in ECMA-48 only are tagged
20682 # with * after their names.
20684 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
20685 # sequences. In the main table, \E stands for an escape (\033) character,
20686 # SPC for space. Pn stands for a single numeric parameter to be inserted
20687 # in decimal ASCII. Ps stands for a list of such parameters separated by
20688 # semicolons. Parameter meanings for most parametrized sequences are
20689 # decribed in the notes.
20691 # Sequence Sequence Parameter or
20692 # Mnemonic Name Sequence Value Mode terminfo
20693 # -----------------------------------------------------------------------------
20694 # APC Applicatn Program Command \E _ - Delim -
20695 # BEL Bell * ^G - - bel
20696 # BPH Break Permitted Here * \E B - * -
20697 # BS Backpace * ^H - EF -
20698 # CAN Cancel * ^X - - - (A)
20699 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
20700 # CCH Cancel Previous Character \E T - - -
20701 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
20702 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
20703 # CMD Coding Method Delimiter * \E
20704 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
20705 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
20706 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
20707 # CSI Control Sequence Intro \E [ - Intro -
20708 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
20709 # CUB Cursor Backward \E [ Pn D 1 eF cub
20710 # CUD Cursor Down \E [ Pn B 1 eF cud
20711 # CUF Cursor Forward \E [ Pn C 1 eF cuf
20712 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
20713 # CUU Cursor Up \E [ Pn A 1 eF cuu
20714 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
20715 # DA Device Attributes \E [ Pn c 0 - -
20716 # DAQ Define Area Qualification \E [ Ps o 0 - -
20717 # DCH Delete Character \E [ Pn P 1 eF dch
20718 # DCS Device Control String \E P - Delim -
20719 # DL Delete Line \E [ Pn M 1 eF dl
20720 # DLE Data Link Escape * ^P - - -
20721 # DMI Disable Manual Input \E \ - Fs -
20722 # DSR Device Status Report \E [ Ps n 0 - - (I)
20723 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
20724 # EA Erase in Area \E [ Ps O 0 eF - (J)
20725 # ECH Erase Character \E [ Pn X 1 eF ech
20726 # ED Erase in Display \E [ Ps J 0 eF ed (J)
20727 # EF Erase in Field \E [ Ps N 0 eF -
20728 # EL Erase in Line \E [ Ps K 0 eF el (J)
20729 # EM End of Medium * ^Y - - -
20730 # EMI Enable Manual Input \E b Fs -
20731 # ENQ Enquire ^E - - -
20732 # EOT End Of Transmission ^D - * -
20733 # EPA End of Protected Area \E W - - - (K)
20734 # ESA End of Selected Area \E G - - -
20735 # ESC Escape ^[ - - -
20736 # ETB End Transmission Block ^W - - -
20737 # ETX End of Text ^C - - -
20738 # FF Form Feed ^L - - -
20739 # FNK Function Key * \E [ Pn SPC W - - -
20740 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
20741 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
20742 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
20743 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
20744 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
20745 # HPB Char Position Backward \E [ j 1 FE -
20746 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
20747 # HT Horizontal Tab * ^I - FE - (N)
20748 # HTJ Horz Tab w/Justification \E I - FE -
20749 # HTS Horizontal Tab Set \E H - FE hts
20750 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
20751 # ICH Insert Character \E [ Pn @ 1 eF ich
20752 # IDCS ID Device Control String \E [ SPC O - * -
20753 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
20754 # IL Insert Line \E [ Pn L 1 eF il
20755 # IND Index \E D - FE -
20756 # INT Interrupt \E a - Fs -
20757 # JFY Justify \E [ Ps SPC F 0 FE -
20758 # IS1 Info Separator #1 * ^_ - * -
20759 # IS2 Info Separator #1 * ^^ - * -
20760 # IS3 Info Separator #1 * ^] - * -
20761 # IS4 Info Separator #1 * ^\ - * -
20762 # LF Line Feed ^J - - -
20763 # LS1R Locking Shift Right 1 * \E ~ - - -
20764 # LS2 Locking Shift 2 * \E n - - -
20765 # LS2R Locking Shift Right 2 * \E } - - -
20766 # LS3 Locking Shift 3 * \E o - - -
20767 # LS3R Locking Shift Right 3 * \E | - - -
20768 # MC Media Copy \E [ Ps i 0 - - (S)
20769 # MW Message Waiting \E U - - -
20770 # NAK Negative Acknowledge * ^U - * -
20771 # NBH No Break Here * \E C - - -
20772 # NEL Next Line \E E - FE nel (D)
20773 # NP Next Page \E [ Pn U 1 eF -
20774 # NUL Null * ^@ - - -
20775 # OSC Operating System Command \E ] - Delim -
20776 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20777 # PFS Page Format Selection * \E Pn SPC J 0 - -
20778 # PLD Partial Line Down \E K - FE - (T)
20779 # PLU Partial Line Up \E L - FE - (U)
20780 # PM Privacy Message \E ^ - Delim -
20781 # PP Preceding Page \E [ Pn V 1 eF -
20782 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20783 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20784 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20785 # PTX Parallel Texts * \E [ \ - - -
20786 # PU1 Private Use 1 \E Q - - -
20787 # PU2 Private Use 2 \E R - - -
20788 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20789 # REP Repeat Char or Control \E [ Pn b 1 - rep
20790 # RI Reverse Index \E M - FE - (V)
20791 # RIS Reset to Initial State \E c - Fs -
20792 # RM Reset Mode * \E [ Ps l - - - (W)
20793 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20794 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20795 # SCI Single-Char Introducer \E Z - - -
20796 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20797 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20798 # SD Scroll Down \E [ Pn T 1 eF rin
20799 # SDS Start Directed String * \E [ Pn ] 1 - -
20800 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20801 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20802 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20803 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20804 # SI Shift In ^O - - - (P)
20805 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20806 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20807 # SLH Set Line Home * \E [ Pn SPC U - - -
20808 # SLL Set Line Limit * \E [ Pn SPC V - - -
20809 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20810 # SM Select Mode \E [ Ps h none - - (W)
20811 # SO Shift Out ^N - - - (Q)
20812 # SOH Start Of Heading * ^A - - -
20813 # SOS Start of String * \E X - - -
20814 # SPA Start of Protected Area \E V - - - (Z)
20815 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20816 # SPH Set Page Home * \E [ Ps SPC G - - -
20817 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20818 # SPL Set Page Limit * \E [ Ps SPC j - - -
20819 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20820 # SR Scroll Right \E [ Pn SPC A 1 eF -
20821 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20822 # SRS Start Reversed String * \E [ Ps [ 0 - -
20823 # SSA Start of Selected Area \E F - - -
20824 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20825 # SSW Set Space Width * \E [ Pn SPC [ none - -
20826 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20827 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20828 # ST String Terminator \E \ - Delim -
20829 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20830 # STS Set Transmit State \E S - - -
20831 # STX Start pf Text * ^B - - -
20832 # SU Scroll Up \E [ Pn S 1 eF indn
20833 # SUB Substitute * ^Z - - -
20834 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20835 # SYN Synchronous Idle * ^F - - -
20836 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20837 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20838 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20839 # TBC Tab Clear \E [ Ps g 0 FE tbc
20840 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20841 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20842 # TSS Thin Space Specification \E [ Pn SC E none FE -
20843 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20844 # VPB Line Position Backward * \E [ Pn k 1 FE -
20845 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20846 # VT Vertical Tabulation * ^K - FE -
20847 # VTS Vertical Tabulation Set \E J - FE -
20849 # ---------------------------------------------------------------------------
20853 # Some control characters are listed in the ECMA-48 standard without
20854 # being assigned functions relevant to terminal control there (they
20855 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20856 # here anyway for completeness.
20858 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20860 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20861 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20862 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20863 # preserved the CHA abbreviation.
20865 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20866 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20867 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20868 # CHT abbreviation.
20870 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20872 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20875 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20876 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20877 # 5 = clear all char tabs, 6 = clear all line tabs.
20879 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20880 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20881 # Position Absolute" but retains the HVP abbreviation.
20883 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20886 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20887 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20888 # DSR, 6 = request CPR response.
20890 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20891 # 1 = clear from beginning, 2 = clear.
20893 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20895 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20897 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20898 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20899 # Position Relative" but retains the HPR abbreviation.
20901 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20904 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20905 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20906 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20907 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20908 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20909 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20910 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20911 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20912 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20913 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20914 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20915 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20916 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20917 # 61-65 = variable highlights for ideograms.
20919 # (P) SI is also called LSO, Locking Shift Zero.
20921 # (Q) SI is also called LS1, Locking Shift One.
20923 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20924 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20925 # Absolute' but retains the VPA abbreviation.
20927 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20928 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20929 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20930 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20931 # 7 = start relay to secondary aux device.
20933 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20936 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20939 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20941 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20942 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20943 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20944 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20945 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20946 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20947 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20948 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20949 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20950 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20951 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20952 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20953 # from ECMA-48's 5th edition but are listed here for reference.
20955 # (X) Select Alternate Presentation Variants is used only for non-Latin
20958 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20960 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20963 # ---------------------------------------------------------------------------
20967 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20968 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20970 # Delim a Delimiter
20972 # x/y identifies a character by position in the ASCII table (column/row)
20974 # eF editor function (see explanation)
20976 # FE format effector (see explanation)
20978 # F is a Final character in
20979 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20980 # a control sequence (F from 4/0 to 7/14)
20982 # Gs is a graphic character appearing in strings (Gs ranges from
20983 # 2/0 to 7/14) in the ASCII table
20985 # Ce is a control represented as a single bit combination in the C1 set
20986 # of controls in an 8-bit character set
20988 # C0 the familiar set of 7-bit ASCII control characters
20990 # C1 roughly, the set of control chars available only in 8-bit systems.
20991 # This is too complicated to explain fully here, so read Jim Fleming's
20992 # article in the February 1983 BYTE, especially pages 214 through 224.
20994 # Fe is a Final character of a 2-character Escape sequence that has an
20995 # equivalent representation in an 8-bit environment as a Ce-type
20996 # (Fe ranges from 4/0 to 5/15)
20998 # Fs is a Final character of a 2-character Escape sequence that is
20999 # standardized internationally with identical representation in 7-bit
21000 # and 8-bit environments and is independent of the currently
21001 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21003 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21006 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21009 # Pn is a numeric parameter in a control sequence, a string of zero or
21010 # more characters ranging from 3/0 to 3/9 in the ASCII table
21012 # Ps is a variable number of selective parameters in a control sequence
21013 # with each selective parameter separated from the other by the code
21014 # 3/11 (which usually represents a semicolon); Ps ranges from
21015 # 3/0 to 3/9 and includes 3/11
21017 # * Not relevant to terminal control, listed for completeness only.
21019 # Format Effectors versus Editor Functions
21021 # A format effector specifies how following output is to be displayed.
21022 # An editor function allows you to modify the display. Informally
21023 # format effectors may be destructive; format effectors should not be.
21025 # For instance, a format effector that moves the "active position" (the
21026 # cursor or equivalent) one space to the left would be useful when you want to
21027 # create an overstrike, a compound character made of two standard characters
21028 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21029 # format effector, so you can do this. But many systems use it in a
21030 # nonstandard fashion, as an editor function, deleting the character to the
21031 # left of the cursor and moving the cursor left. When Control-H is assumed to
21032 # be an editor function, you cannot predict whether its use will create an
21033 # overstrike unless you also know whether the output device is in an "insert
21034 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21035 # its effect can always be predicted. The familiar characters carriage
21036 # return, linefeed, formfeed, etc., are defined as format effectors.
21038 # NOTES ON THE DEC VT100 IMPLEMENTATION
21040 # Control sequences implemented in the VT100 are as follows:
21042 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21043 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21045 # plus several private DEC commands.
21047 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21049 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21050 # Erase from beginning of line to cursor Esc [ 1 K
21051 # Erase line containing cursor Esc [ 2 K
21052 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21053 # Erase from beginning of screen to cursor Esc [ 1 J
21054 # Erase entire screen Esc [ 2 J
21056 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21057 # Esc [ 2 J, but this is wrong; the default is 0.
21059 # The VT100 responds to receiving the DA (Device Attributes) control
21061 # Esc [ c (or Esc [ 0 c)
21063 # by transmitting the sequence
21067 # where Ps is a character that describes installed options.
21069 # The VT100's cursor location can be read with the DSR (Device Status
21074 # The VT100 reports by transmitting the CPR sequence
21078 # where Pl is the line number and Pc is the column number (in decimal).
21080 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21084 # Here is a description of the color and attribute controls supported in the
21085 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21086 # terminal emulators for Intel boxes obey these. They are a proper subset
21087 # of the ECMA-48 escapes.
21089 # 0 all attributes off
21090 # 1 foreground bright
21092 # 5 blink on/background bright (not reliable with brown)
21094 # 8 set blank (non-display)
21095 # 10 set primary font
21096 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21097 # 12 set second alternate font (on PCs, display IBM high-half chars)
21099 # Color attribute sets
21100 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21101 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21102 # Bright black becomes gray. Bright brown becomes yellow,
21103 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21105 # * If the 5 attribute is on and you set a background color (40-47) it is
21106 # supposed to enable bright background.
21108 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21109 # when you try to set a "bright brown" (yellow) background with attribute
21110 # 5 (you get a blinking yellow foreground instead). A few displays
21111 # (including the System V console) support an attribute 6 that undoes this
21112 # braindamage (this is required by iBCS2).
21114 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21115 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21118 #### Intel Binary Compatibility Standard
21120 # For comparison, here are the capabilities implied by the Intel Binary
21121 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21122 # These recommendations are optional. IBCS2 allows the leading escape to
21123 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21124 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21125 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21126 # terminfo entry are followed with the corresponding capability in parens:
21128 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21129 # CSI 2h lock keyboard
21130 # CSI 2i send screen as input
21131 # CSI 2l unlock keyboard
21132 # CSI 6m enable background color intensity
21133 # CSI <0-2>c reserved
21134 # CSI <0-59>m select graphic rendition
21135 # CSI <n>;<m>H (cup) cursor to line n and column m
21136 # CSI <n>;<m>f cursor to line n and column m
21137 # CSI <n>@ (ich) insert characters
21138 # CSI <n>A (cuu) cursor up n lines
21139 # CSI <n>B (cud) cursor down n lines
21140 # CSI <n>C (cuu) cursor right n characters
21141 # CSI <n>D (cud) cursor left n characters
21142 # CSI <n>E cursor down n lines and in first column
21143 # CSI <n>F cursor up n lines and in first column
21144 # CSI <n>G (hpa) position cursor at column n-1
21145 # CSI <n>J (ed) erase in display
21146 # CSI <n>K (el) erase in line
21147 # CSI <n>L (il) insert line(s)
21148 # CSI <n>P (dch) delete characters
21149 # CSI <n>S (indn) scroll up n lines
21150 # CSI <n>T (rin) scroll down n lines
21151 # CSI <n>X (ech) erase characters
21152 # CSI <n>Z (cbt) back up n tab stops
21153 # CSI <n>` cursor to column n on line
21154 # CSI <n>a (cuu) cursor right n characters
21155 # CSI <n>d (vpa) cursor to line n
21156 # CSI <n>e cursor down n lines and in first column
21157 # CSI <n>g (cbt) clear all tabs
21158 # CSI <n>z make virtual terminal n active
21159 # CSI ?7h (smam) turn automargin on
21160 # CSI ?7l (rmam) turn automargin off
21161 # CSI s save cursor position
21162 # CSI u restore cursor position to saved value
21163 # CSI =<c>A set overscan color
21164 # CSI =<c>F set normal foreground color
21165 # CSI =<c>G set normal background color
21166 # CSI =<c>H set reverse foreground color
21167 # CSI =<c>I set reverse foreground color
21168 # CSI =<c>J set graphic foreground color
21169 # CSI =<c>K set graphic foreground color
21170 # CSI =<n>g (dispc) display n from alternate graphics character set
21171 # CSI =<p>;<d>B set bell parameters
21172 # CSI =<s>;<e>C set cursor parameters
21173 # CSI =<x>D enable/disable intensity of background color
21174 # CSI =<x>E set/clear blink vs. bold background
21175 # CSI 7 (sc) (sc) save cursor position
21176 # CSI 8 (rc) (rc) restore cursor position to saved value
21177 # CSI H (hts) (hts) set tab stop
21178 # CSI Q<n><string> define function key string
21179 # (string must begin and end with delimiter char)
21180 # CSI c (clear) clear screen
21182 # The lack of any specification for attributes in SGR (among other things)
21183 # makes this a wretchedly weak standard. The table above is literally
21184 # everything iBSC2 has to say about terminal escape sequences; there is
21185 # no further discussion of their meaning or how to set the parameters
21186 # in these sequences at all.
21189 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21191 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21192 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21193 # with the extension names chosen for compatibility with the termcap names
21194 # assigned in System V terminfo. There are some variant extension sets out
21195 # there. We try to describe them here.
21197 # XENIX extensions:
21199 # The XENIX extensions include a set of function-key capabilities as follows:
21201 # code XENIX variable name terminfo name name clashes?
21202 # ---- ------------------- ------------- -----------------------
21204 # CR key_char_right
21205 # CW key_change_window create_window
21207 # HM key_home khome
21209 # LD key_delete_line kdl1
21210 # LF key_linefeed label_off
21211 # NU key_next_unlocked_cell
21212 # PD key_page_down knp
21214 # PN start_print mc5
21216 # PS stop_print mc4
21217 # PU key_page_up kpp pulse
21218 # RC key_recalc remove_clock
21219 # RF key_toggle_ref req_for_input
21220 # RT key_return kent
21221 # UP key_up_arrow kcuu1 parm_up_cursor
21223 # WR key_word_right
21225 # The XENIX extensions also include the following character-set and highlight
21228 # XENIX terminfo function
21229 # ----- -------- ------------------------------
21230 # GS smacs start alternate character set
21231 # GE rmacs end alternate character set
21232 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21233 # bo blink begin blink (not used in /etc/termcap)
21234 # be end blink (not used in /etc/termcap)
21235 # bb blink glitch (not used in /etc/termcap)
21236 # it dim begin dim (not used in /etc/termcap)
21237 # ie end dim (not used in /etc/termcap)
21238 # ig dim glitch (not used in /etc/termcap)
21240 # Finally, XENIX also used the following forms-drawing capabilities:
21242 # single double type ASCII approximation
21243 # ------ ------ ------------- -------------------
21244 # GV Gv vertical line |
21245 # GH Gv horizontal line - _
21246 # G1 G5 top right corner _ |
21247 # G2 G6 top left corner |
21248 # G3 G7 bottom left corner |_
21249 # G4 G8 bottom right corner _|
21250 # GD Gd down-tick character T
21251 # GL Gl left-tick character -|
21252 # GR Gr right-tick character |-
21253 # GC Gc middle intersection -|-
21254 # GU Gu up-tick character _|_
21256 # These were invented to take advantage of the IBM PC ROM character set. One
21257 # can compose an acsc string from the single-width characters as follows
21258 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21259 # When translating a termcap file, ncurses tic will do this automatically.
21260 # The double forms characters don't fit the SVr4 terminfo model.
21264 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21265 # nonstandard capabilities. Its signature is the KM capability, used to name
21266 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21267 # set. Comments in the original, and a little cross-checking with other AT&T
21268 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21269 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21270 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21271 # cursor invisible), and CV=:ve: (make cursor normal).
21275 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21276 # have the System V capabilities up to SVr1 level. After that, it supports
21277 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21278 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21279 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21280 # HP binary format incompatible with SVr4's.
21284 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21285 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21286 # capabilities following prtr_non with the following special capabilties:
21287 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21288 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21289 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21290 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21291 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21292 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21293 # correspond to acsc chars, here is the mapping:
21295 # box1[0] = ACS_ULCORNER
21296 # box1[1] = ACS_HLINE
21297 # box1[2] = ACS_URCORNER
21298 # box1[3] = ACS_VLINE
21299 # box1[4] = ACS_LRCORNER
21300 # box1[5] = ACS_LLCORNER
21301 # box1[6] = ACS_TTEE
21302 # box1[7] = ACS_RTEE
21303 # box1[8] = ACS_BTEE
21304 # box1[9] = ACS_LTEE
21305 # box1[10] = ACS_PLUS
21307 # The box2 characters are the double-line versions of these forms graphics.
21308 # The AIX binary terminfo format is incompatible with SVr4's.
21310 # Iris console extensions:
21312 # HS is half-intensity start; HE is half-intensity end
21313 # CT is color terminal type (for Curses & rogue)
21314 # CP is color change escape sequence
21315 # CZ are color names (for Curses & rogue)
21317 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21321 # There is a set of extended termcaps associated with something
21322 # called the "Terminal Control" or TC package created by MainStream Systems,
21323 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21324 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21325 # that flags color terminals.
21327 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21328 # infocmp to manipulate user-definable capabilities. Those that are intended
21329 # for use in either terminfo or termcap use 2-character names. Extended
21330 # function keys do not use 2-character names, and are available only with
21333 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21334 # supports this extension; termcap libraries can as noted above make limited
21335 # use of the feature.
21337 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21340 # SCREEN Extensions:
21342 # The screen program uses the termcap interface. It recognizes a few useful
21343 # nonstandard capabilities. Those are used in this file.
21345 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21347 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21348 # E0 (str) Switch charset 'G0' back to standard charset.
21349 # S0 (str) Switch charset 'G0' to the specified charset.
21350 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
21353 # AX is relatively straightforward; it is interpreted by ncurses to say that
21354 # SGR 39/49 reset the terminal's foreground and background colors to their
21357 # XT is harder, since screen's manpage does not give more details. For that,
21358 # we must read screen's source-code. When XT is set, screen assumes
21360 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
21361 # screen may also set the terminal's name, which is (for xterm) distinct
21362 # from the icon name.
21363 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
21364 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
21365 # this is an rxvt feature.
21366 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
21367 # These are from xterm, although xterm accepts mouse codes that may not be
21368 # recognized by screen, e.g., 1005, 1006.
21369 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
21370 # sequence. However, because screen uses only termcap, the values returned
21371 # by Af/Ab are not usable because they rely on expressions that termcap
21372 # does not support. Therefore, screen uses a hardcoded string to work
21373 # around the limitation.
21374 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
21376 # The other ISO-2022 features are rarely used, but provided here to make
21377 # screen's termcap features available.
21379 # XTERM Extensions:
21381 # Most of the xterm extensions are for function-keys. Since patch #94 (in
21382 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
21383 # additional function-key strings. Some other developers copied the feature,
21384 # though they did not follow xterm's lead in patch #167 (in 2002), to make
21385 # these key definitions less ambiguous.
21387 # A few terminals provide similar functionality (sending distinct keys when
21388 # a modifier is used), including rxvt.
21390 # These are the extended keys defined in this file:
21392 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
21393 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
21394 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
21395 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
21397 # Here are the other xterm-related extensions which are used in this file:
21399 # Cr is a string capability which resets the cursor color
21400 # Cs is a string capability which sets the cursor color to a given value.
21401 # The single string parameter is the color name/number, according to the
21403 # Ms modifies the selection/clipboard. Its parameters are
21404 # p1 = the storage unit (clipboard, selection or cut buffer)
21405 # p2 = the base64-encoded clipboard content.
21406 # Se resets the cursor style to the terminal power-on default.
21407 # Ss is a string capability with one numeric parameter. It is used to set the
21408 # cursor style as described by the DECSCUSR function to a block or
21410 # XM is a string capability which overrides ncurses's built-in string which
21411 # enables xterm mouse mode.
21413 # Miscellaneous extensions:
21415 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
21416 # This was implemented for the Hurd.
21417 # E3 clears the terminal's scrollback buffer. This was implemented in the
21418 # Linux 3.0 kernel as a security feature.
21419 # U8 is a numeric capability which denotes a terminal emulator which does not
21420 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
21421 # value to enable it.
21423 ######## CHANGE HISTORY
21425 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
21426 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
21427 # maintained by Eric S. Raymond as part of the ncurses project.
21429 # This file contains all the capability information present in John Kunze's
21430 # last version of the termcap master file, except as noted in the change
21431 # comments at end of file. Some information about very ancient obsolete
21432 # capabilities has been moved to comments. Some all-numeric names of older
21433 # terminals have been retired.
21435 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
21436 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
21437 # used by BSD curses.
21439 # The 9.1.0 version of this file was translated from my lightly-edited copy of
21440 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
21441 # the purpose. Unless the ncurses tic implementation and the Lisp code were
21442 # making perfectly synchronized mistakes which I then failed to catch by
21443 # eyeball, the translation was correct and perfectly information-preserving.
21445 # Major version number bumps correspond to major version changes in ncurses.
21447 # Here is a log of the changes since then:
21449 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
21450 # * First terminfo master translated from 8.3.
21451 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
21452 # * Replaced Wyse entries with updated entries supplied by vendor.
21454 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
21455 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
21456 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
21457 # * Better XENIX keycap translation. Describe TC termcaps.
21458 # * Contact and history info supplied by Qume.
21459 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
21460 # * Raided the Shuford FTP site for recent termcaps/terminfos.
21461 # * Added information on X3.64 and VT100 standard escape sequences.
21462 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
21463 # * Added a correct X11R6 xterm entry.
21464 # * Fixed terminfo translations of padding.
21465 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
21466 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
21467 # * Added u6/u7/u8/u9 capabilities.
21468 # * Added PCVT entry.
21469 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
21470 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
21471 # to use reverse-video standout so Emacs will look right.
21472 # * Added el1 capability to ansi.
21473 # * Added smacs/rmacs to ansi.sys.
21475 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
21476 # * New mt70 entry.
21477 # * Added COPYRIGHTS AND OTHER DELUSIONS.
21478 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
21479 # smartvid & smarterm, ampex 175 & 219 & 232,
21480 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
21481 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
21482 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
21483 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
21484 # * Replaced the Perkin-Elmer entries with vendor's official ones.
21485 # * Restored the old minimal-ansi entry, luna needs it.
21486 # * Fixed some incorrect ip and proportional-padding translations.
21487 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
21488 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
21489 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
21490 # to force a particular height.
21491 # * Added beehive4 and reorganized other Harris entries.
21492 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
21493 # * Merged in DEC's official entries for its terminals. The only old
21494 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
21495 # * Replaced the translated BBN Bitgraph entries with purpose-built
21496 # ones from AT&T's SVr3.
21497 # * Replaced the AT&T entries with AT&T's official terminfos.
21498 # * Added teleray 16, vc415, cops10.
21499 # * Merged in many individual capabilities from SCO terminfo files.
21500 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
21502 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
21503 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
21504 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
21505 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
21506 # simterm, citoh and variants.
21507 # * Replaced sol entry with sol1 and sol2.
21508 # * Replaced Qume QVT and Freedom-series entries with purpose-built
21509 # terminfo entries.
21510 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
21511 # and dg200 entries using caps from from SCO.
21512 # * Added the usual set of function-key mappings to ANSI entry.
21513 # * Corrected xterm's function-key capabilities.
21514 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
21515 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
21516 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
21517 # * Fix in xterm entry, get the arrow keys right.
21518 # * Change some \0 escapes to \200.
21519 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
21520 # * Added apple (Videx card), adm1a, oadm31.
21521 # * Fixed malformed ampex csr.
21522 # * Fixed act4, cyb110; they had old-style prefix padding left in.
21523 # * Changed mandatory to advisory padding in many entries.
21524 # * Replaced HP entries up to hpsub with purpose-built ones.
21525 # * Blank rmir/smir/rmdc/smdc capabilities removed.
21526 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
21527 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
21528 # * Replaced the Ann Arbor entries with SCO's, the init strings are
21529 # more efficient (but the entries otherwise identical).
21530 # * Added dg211 from Shuford archive.
21531 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
21532 # adm42-nl, pc52, gs6300, xerox820, uts30.
21533 # * Pull SCO's padding into vi200 entry.
21534 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
21535 # entries merged in from SCO's descriptions.
21536 # * Fixed old-style prefix padding on zen50, h1500.
21537 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
21538 # entry from SCO's description.
21539 # * Reorganized the special entries.
21540 # * Added lm#0 to cbunix and virtual entries.
21542 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
21543 # * Restored cdc456tst.
21544 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
21545 # * Added megatek, beacon, microkit.
21546 # * Freeze for ncurses-1.9 release.
21547 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
21548 # * Added historical data for TAB.
21549 # * Comment fixes from David MacKenzie.
21550 # * Added the new BSDI pc3 entry.
21551 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
21552 # * A change in the tic -C logic now ensures that all entries in
21553 # the termcap translation will fit in < 1024 bytes.
21554 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
21555 # from GNU termcap file. This merges in all their local information.
21556 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
21557 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
21558 # * Added warnings about entries with long translations (restoring
21559 # all the GNU termcaps pushes a few over the edge).
21560 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
21561 # * Yet another tic change, and a couple of entry tweaks, to reduce the
21562 # number of long (> 1024) termcap translations back to 0.
21564 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
21565 # * Added kf13-kf20 to Linux entry.
21566 # * Regularize Prime terminal names.
21567 # * Historical data on Synertek.
21568 # * Freeze for ncurses-1.9.1.
21569 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
21570 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
21571 # * Eliminate whitespace in short name fields, this tanks some scripts.
21572 # * Name field changes to shorten some long entries.
21573 # * Termcap translation now automatically generates empty rmir/smir
21574 # when ich1/ich is present (copes with an ancient vi bug).
21575 # * Added `screen' entries from FSF's screen-3.6.2.
21576 # * Added linux-nic and xterm-nic entries.
21577 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
21578 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
21579 # eliminating some special-case code in ncurses.
21581 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
21582 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
21583 # that captures everything unique from it.
21584 # * Added reorder script generator.
21585 # * Freeze for ncurses 1.9.2 release.
21586 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
21587 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
21588 # * Added Olaf Siebert's corrections for adm12.
21589 # * ansi-pc-color now includes the colors and pairs caps, so that
21590 # entries which use it will inherit them automatically.
21591 # * The linux entry can now recognize the center (keypad 5) key.
21592 # * Removed some junk that found its way into Linux acsc.
21594 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
21595 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
21596 # * xterm doesn't try to use application keypad mode any more.
21597 # * Freeze for ncurses-1.9.3 release.
21598 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
21599 # * Added corrected sun entry from vendor.
21600 # * Added csr capability to linux entry.
21601 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
21602 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
21603 # * Some commented-out caps in long entries come back in, my code
21604 # for computing string-table lengths had a bug in it.
21605 # * pcansi series modified to fit comm-program reality better.
21606 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
21607 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
21608 # * Correct some bad aliases in the pcansi series
21609 # * Added entry for QNX console.
21610 # * Clean up duplicate long names for use with 4.4 library.
21611 # * Change vt100 standout to be normal reverse vide, not bright reverse;
21612 # this makes the Emacs status line look better.
21613 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
21614 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
21615 # * Minor surgery, mostly on name strings, to shorten termcap version.
21617 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
21618 # * Added dec-vt100 for use with the EWAN emulator.
21619 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
21620 # * Freeze for 1.9.5 alpha release.
21621 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
21622 # * Changed xterm lines to 24, the X11R6 default.
21623 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
21624 # * Added 7 newly discovered, undocumented acsc characters to linux
21625 # entry (the pryz{|} characters).
21626 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
21627 # * Correct two typos in the xterm entries introduced in 9.9.1.
21628 # * I finally figured out how to translate ko capabilities. Done.
21629 # * Added tvi921 entries from Tim Theisen.
21630 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
21631 # * Removed mystery tec entry, it was neither interesting nor useful.
21632 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
21633 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
21634 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
21635 # by making them relative to use capabilities
21636 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
21637 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
21638 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
21640 # * Translate all home=\E[;H capabilities to home=\E[H, they're
21642 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
21643 # vt100 and ANSI-like terminals.
21644 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
21645 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
21646 # does this now, too.
21647 # * fviewpoint is gone, it duplicated screwpoint.
21648 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
21649 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
21650 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
21651 # The UW vi50 replaces the old one, which becomes vi50adm,
21652 # * No more embedded commas in name fields.
21654 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
21655 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
21656 # * Introduced klone+* entries for describing Intel-console behavior.
21657 # * Linux kbs is default-mapped to delete for some brain-dead reason.
21658 # * -nsl -> -ns. The -pp syntax is obsolete.
21659 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
21660 # * Make xterm entry do application-keypad mode again. I got complaints
21661 # that it was messing up someone's 3270 emulator.
21662 # * Added some longname fields in order to avoid warning messages from
21663 # older tic implementations.
21664 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
21665 # it! (This gives us pi, greater than, less than, and a few more.)
21666 # * Freeze for ncurses-1.9.6 release.
21667 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
21668 # * Add xon to a number of console entries, they're memory-mapped and
21669 # don't need padding.
21670 # * Correct the use dependencies in the ansi series.
21671 # * Hand-translate more XENIX capabilities.
21672 # * Added hpterm entry for HP's X terminal emulator.
21673 # * Added aixterm entries.
21674 # * Shortened four names so everything fits in 14 chars.
21676 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
21677 # * Added ibcs2 entry and info on iBCS2 standard.
21678 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
21679 # * We can handle the HP meml/memu capability now.
21680 # * Added smacs to klone entries, just as documentation.
21681 # * Carrected ansi.sys and cit-500 entries.
21682 # * Added z39, vt320-k311, v220c, and avatar entries.
21683 # * Make pcansi use the ansi.sys invis capability.
21684 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
21685 # tvi925, tvi950, dt80, ncr7900i, h19.
21686 # * X3.64 has been withdrawn, change some references.
21687 # * Removed function keys from ansi-m entry.
21688 # * Corrected ansi.sys entry.
21689 # * Freeze for ncurses-1.9.7 release.
21690 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
21691 # * Added rmam/smam capabilities to many entries based on init strings.
21692 # * Added correct hpa/vpa to linux.
21693 # * Reduced several entries relative to vt52.
21694 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
21695 # * Exiled some utterly unidentifiable custom and homebrew types to the
21696 # UFO file; also, obsolete small-screen hardware; also, entries which
21697 # look flat-out incorrect, garbled, or redundant. These include the
21698 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
21699 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
21700 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
21701 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
21702 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
21703 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
21704 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
21705 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
21706 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
21707 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
21708 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
21709 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
21710 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
21711 # * Corrected pcvt25h as suggested by Brian C. Grayson
21712 # <bgrayson@pine.ece.utexas.edu>.
21713 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
21714 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
21715 # * Added kent=\EOM to xterm entry.
21717 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
21718 # * Corrected gigi entry.
21719 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
21720 # bad hpa/vpa capabilities.
21721 # * Corrected flash strings to have a uniform delay of .2 sec. No
21722 # more speed-dependent NUL-padding!
21723 # * terminfo capabilities in comments bracketed with <>.
21724 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
21725 # * Replaced pcvt with the 3.31 pcvt entries.
21726 # * Freeze for 1.9.7a.
21727 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
21728 # * Added emu entry from the X11R6 contrib tape sources.
21730 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
21731 # * Improved iris-ansi and sun entries.
21732 # * More flash string improvements.
21733 # * Corrected wy160 & wy160 as suggested by Robert Dunn
21734 # * Added dim to at386.
21735 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
21736 # he's ready to start using the termcap generated from this one.
21737 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
21738 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
21739 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
21740 # att610, att620, att630,
21741 # * Changed hazeltine name prefix from h to hz.
21742 # * Sent t500 to the UFI file.
21743 # * I think we've sucked all the juice out of BSDI's termcap file now.
21744 # * Freeze for ncurses 1.9.8 release
21745 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
21746 # * Unfreeze, linux kbs needed to be fixed.
21747 # * Tim Theisen pinned down a bug in the DMD firmware.
21748 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
21749 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
21750 # (The broken ones had been shadowed by sgr.)
21751 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
21752 # * Added documentation on ECMA-48 standard.
21753 # * New Amiga entry.
21754 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
21755 # * More ECMA-48 stuff
21756 # * Corrected typo in minix entry, added pc-minix.
21757 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
21758 # * Added rxvt entry.
21759 # * Added 1.3.x color-change capabilities to linux entry.
21760 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
21761 # * Corrected rxvt entry khome/kend.
21762 # * Corrected linux color change capabilities.
21763 # * NeXT entries from Dave Wetzel.
21764 # * Cleaned up if and rf file names (all in /usr/share now).
21765 # * Changed linux op capability to avoid screwing up a background color
21766 # pair set by setterm.
21767 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
21768 # * Added xterm-sun.
21769 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
21772 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
21773 # * Another sweep through the Shuford archive looking for new info.
21774 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
21775 # * Added st52 from Per Persson.
21776 # * Added eterm from the GNU Emacs 19.30 distribution.
21777 # * Freeze for 1.9.9.
21778 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
21779 # * FreeBSD console entries from Andrew Chernov.
21780 # * Removed duplicate Atari st52 name.
21781 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
21782 # * xterm doesn't actually have ACS_BLOCK.
21783 # * Change klone+color setf/setb to simpler forms that can be
21784 # translated into termcap.
21786 # * Removed mechanically-generated junk capabilities from cons* entries.
21787 # * Added color support to bsdos.
21788 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
21789 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
21790 # * Created ecma+color, linux can use it. Also added ech to linux.
21791 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
21792 # * Add descriptions to FreeBSD console entries. Also shorten
21793 # some aliases to <= 14 chars for portability.
21794 # * Added x68k console
21795 # * Added OTbs to several VT-series entries.
21796 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
21797 # * screen entry update for 3.7.1 from Michael Alan Dorman.
21798 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
21799 # * kterm correction due to Kenji Rikitake.
21800 # * ACS correction in vt320-kll due to Phillippe De Muyter.
21801 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
21802 # * Sun console entry correction from J.T. Conklin.
21803 # * Changed all DEC VT300 and up terminals to use VT300 tab set
21804 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
21805 # * Added smul to linux entry (we never noticed it was missing
21806 # because of sgr!).
21807 # * Added rmln to hp+labels (deduced from other HP entries).
21808 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
21809 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
21810 # * Corrected vt220 acsc.
21811 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
21812 # this corresponds to reality and helps prevent some tic warnings.
21813 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
21814 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
21815 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
21816 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
21817 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
21818 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
21819 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
21820 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
21821 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
21822 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
21823 # ifmr, v3220, wy100q, tandem653, ibmaed.
21824 # * Added DWK terminal description.
21825 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
21826 # * Many entries now have highlights inherited from adm+sgr.
21827 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
21828 # * xtitle and xtitle-twm enable access to the X status line.
21829 # * Added linux-1.3.6 color palette caps in conventional format.
21830 # * Added adm1178 terminal.
21831 # * Move fos and apollo terminals to obsolete category.
21832 # * Aha! The BRL terminals file told us what the Iris extensions mean.
21833 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
21834 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
21836 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
21837 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
21838 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
21839 # * Corrected, from BRL termcap file: vi50.
21840 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
21841 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
21842 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
21843 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
21844 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
21845 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
21846 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
21847 # * Paired-attribute fixes to various terminals.
21848 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
21849 # * xterm entry corrections from Thomas Dickey.
21850 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
21851 # * Added t916 entry, translated from a termcap in SCO's support area.
21852 # * New qnx entry from Michael Hunter.
21853 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
21854 # * Added hpex2 from Ville Sulko.
21855 # * Fixed a bug that ran the qnx and pcvtXX together.
21856 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
21857 # * Added dtterm entry from Solaris CDE.
21858 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
21859 # * corrected pairs#8 typo in dtterm entry.
21861 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21862 # * updated xterm entry to cover 3.1.2E's new features.
21863 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21864 # * Added new minix entry
21865 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21866 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21867 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21868 # * Added Prism entries and kt7ix.
21869 # * Caution notes about EWAN and tabset files.
21870 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21871 # * Added acsc/rmacs/smacs to vt52.
21872 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21873 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21874 # added technical corrections to avoid warning messages.
21875 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21876 # * Added rmso=\E[27m in Linux entry.
21877 # * Added koi8-r support for Linux console.
21878 # * Replace xterm entries with canonical ones from XFree86 3.2.
21879 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21880 # * Added color_xterm from Jacob Mandelson
21881 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21882 # * Back off the xterm entry to use r6 as a base.
21883 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21884 # * Added dec-vt220 at Adrian Garside's request.
21886 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21888 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21889 # * Minor corrections to xterm entries.
21890 # * Replaced EWAN telnet entry.
21891 # * Dropped the reorder script generator. It was a fossil.
21892 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21893 # * Replaced minitel-2 entry.
21894 # * Added MGR, ansi-nt.
21895 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21896 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21897 # the 4.4BSD Lite2 file.
21899 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21900 # * Use setaf/setab consistently with SVr4.
21901 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21902 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21903 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21904 # * add xterm-16color, for XFree86 3.3
21905 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21906 # * correct typo in emu
21907 # * correct typo in vt102-w (Robert Wuest)
21908 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21909 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21910 # * remove ech capability from rxvt (it does the wrong thing)
21911 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21912 # * remove spurious newlines from several entries (hp+color, wy50,
21913 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21915 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21916 # * correct rmso capability of wy50-mc
21917 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21918 # * add cbt to xterm-xf86-v32
21919 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21920 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21921 # other capabilities not in xterm-r6.
21922 # * remove alternate character set from kterm entry.
21923 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21924 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21925 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21926 # * add xterm-8bit entry.
21927 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21928 # * repair several places where early version of tic replaced \, with \\\,
21929 # * make acsc entries canonical form (sorted, uniq).
21930 # * modify acsc entries for linux, linux-koi8
21931 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21932 # * add color, mouse support to kterm.
21933 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21934 # * correct wy120 smxon/tbc capabilities which were stuck together.
21935 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21936 # * add entry for xterm-xf86-v39t
21937 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21938 # * add u8,u9 to sun-il description
21939 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21940 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21942 # * add hds200 description (Walter Skorski)
21943 # * add EMX 0.9b descriptions
21944 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21945 # * rename xhpterm back to hpterm.
21946 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21947 # * change initc in linux-c-nc to use 0..1000 range.
21948 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21949 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21950 # * add sgr0 for rxvt.
21951 # * remove bogus smacs/rmacs from EMX descriptions.
21952 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
21953 # * revised entry for att7300
21954 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
21955 # * use \0 rather than \200.
21956 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21957 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21958 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21959 # * rename xterm-xf86-v39t to xterm-xf86-v40
21960 # * remove bold/underline from sun console entries since they're not
21962 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21963 # * add beterm entry (Fred Fish)
21964 # * add irix-color/xwsh entry.
21965 # * turn ncv off for linux.
21966 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21967 # * set ncv for FreeBSD console (treat colors with reverse specially).
21968 # * remove sgr string from qnx based on report by Xiaodan Tang
21969 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21970 # * remove spurious commas from descriptions
21971 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21972 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21973 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21974 # apparently based on cp-866).
21976 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21978 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21979 # * Replaced minitel-2 entry.
21980 # * Added MGR, ansi-nt.
21981 # * Minor corrections to xterm entries.
21982 # * Replaced EWAN telnet entry.
21983 # * Dropped the reorder script generator. It was a fossil.
21984 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21985 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21986 # the 4.4BSD Lite2 file.
21987 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21988 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21989 # * Updated iris-ansi; corrected vt102-w.
21990 # * Switch base xterm entry to 3.3 level.
21991 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21993 # * Removed rmir/smir from tv92B.
21995 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21996 # * add hds200 description (Walter Skorski)
21997 # * add beterm entry (Fred Fish)
21998 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21999 # iris-color entries.
22000 # * add emx entries.
22001 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22002 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22004 # * remove sgr string from qnx based on report by Xiaodan Tang
22005 # * Added u8/u9, removed rmul/smul from sun-il.
22006 # * 4.2 tic displays \0 rather than \200.
22007 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22008 # apparently based on cp-866).
22009 # * Merged in Pavel Roskin's acsc for linux-koi8
22010 # * Corrected some erroneous \\'s to \.
22011 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22012 # * II -> ii in pcvtXX, screen, xterm.
22013 # * Removed \n chars following ANSI escapes in sgr & friends.
22014 # * Updated Wyse entries.
22015 # * h19 corrections from Tim Pierce.
22016 # * Noted that the dm2500 has both ich and smir.
22017 # * added pccons for the Alpha under OSF/1.
22018 # * Added Sony NEWS workstation entries and cit101e-rv.
22019 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22020 # the Verkuil entry messes up with Amiga Telnet.
22021 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22022 # * Corrected attributions in 10.2.0 release notes.
22023 # * Scanned the Shuford archive for new terminfos and information.
22024 # * Removed sgr from qnx entry (Thomas Dickey).
22025 # * Added entries for ICL and Kokusai Data Systems terminals.
22026 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22027 # * Incorporated att700 from the Boundless Technology FTP site.
22028 # * Miscellaneous contact-address and Web-page updates.
22030 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22033 # * add nxterm and xterm-color terminfo description (request by Cristian
22034 # Gafton <gafton@redhat.com>).
22035 # * modify rxvt terminfo description to clear alternate screen before
22036 # switching back to normal screen, for compatibility with applications
22037 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22038 # * modify linux terminfo description to reset color palette (reported
22039 # by Telford Tendys <telford@eng.uts.edu.au>).
22042 # * merge changes from current XFree86 xterm terminfo descriptions.
22045 # * Added minitel1 entries from Alexander Montaron.
22046 # * Added qnxt2 from Federico Bianchi.
22047 # * Added arm100 terminfo entries from Dave Millen.
22050 # * Added ncsa telnet entries from Francesco Potorti
22053 # * modify ncsa telnet entry to reflect color, other capabilities based on
22054 # examination of the source code - T.Dickey.
22057 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22060 # * Added Francesco Potorti's tuned Wyse 99 entries.
22061 # * dtterm enacs correction from Alexander V. Lukyanov.
22062 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22063 # * correct a typo in icl6404 entry.
22064 # * add xtermm and xtermc
22067 # * format most %'char' sequences to %{number}
22068 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22069 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22072 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22073 # * correct initialization string in xterm-r5, add misc other features
22074 # to correspond with xterm patch 84 - TD
22077 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22078 # * add Mathew Vernon's mach console entries
22079 # * corrections for ncsa function-keys (report by Larry Virden)
22082 # * change linux to use ncv#2, since underline does not work with color - TD
22085 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22086 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22087 # application modes, change kent to use the correct keypad code - TD
22090 # * add entry for Tera Term - TD
22093 # * minor improvements for teraterm entry - TD
22094 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22095 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22098 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22099 # xterm and ncsa entries by removing the unneeded ones. Note that
22100 # some entries will return kend & khome versus kslt and kfnd, for
22101 # PC-style keyboards versus strict vt220 compatiblity - TD
22104 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22106 # * add 'crt' entry - TD
22107 # * correct typos in 'linux-c' entry - TD
22110 # * update entries for BSD/OS console to use klone+sgr and klone+color
22111 # (Jeffrey C Honig)
22114 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22117 # * add linux-lat, from RedHat patches to ncurses 4.2
22120 # * add complete set of default function-key definitions for scoansi - TD.
22123 # * add cnorm, cvvis for Linux 2.2 kernels
22126 # * add kmous to xterm-r5 -TD
22127 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22128 # parent "use" clause -TD
22131 # * corrected cnorm, added el1 in 'screen' description -TD
22134 # * add ms-vt100 -TD
22137 # * corrections to beterm entry -TD
22140 # * add cygwin entry -TD
22143 # * minor corrections for beterm entry -TD
22146 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22149 # * add amiga-8bit entry
22150 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22151 # rcons-color, based on
22152 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22153 # * add alias for iris-ansi-net
22156 # * corrected scoansi entry's acsc, some function keys, add color -TD
22159 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22160 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22161 # key mapping, leaving Potorti's entries more like he named them -TD
22162 # * remove enter/exit am-mode from cygwin -TD
22165 # * correct typos in several entries (missing '[' from CSI):
22166 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22167 # strings for avt-ns -TD
22168 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22171 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22172 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22173 # * add xterm-88color and xterm-256color -TD
22176 # * add "obsolete" termcap strings -TD
22177 # * add kvt and gnome entries -TD
22180 # * correct cup string for regent100 -TD
22183 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22184 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22185 # * change OTrs capabilities to rs2 -TD
22186 # * add obsolete and extended capabilities to 'screen' -TD
22189 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22191 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22192 # and adding kcbt -TD
22195 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22196 # nonstandard resource settings -TD
22199 # * minor fixes for xterm-*, based on Debian #58530 -TD
22202 # * add several terminal types from esr's "11.0", as well as comments.
22203 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22204 # vt220-8bit, vt220-old, wy85-8bit
22207 # * add several terminal types from esr's "11.0.1" (ansi-*).
22208 # * update OTxx capabilities for changes on 2000/3/4.
22209 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22212 # * move screen's AX extension to ecma+color, modify several entries to
22213 # use that, adjusting ncv as needed -TD
22216 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22217 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22218 # in esr's version.
22221 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22222 # * correct color definition for ibm3164, make minor changes to other
22223 # IBM terminal definitions based on recent terminfo descriptions -TD
22226 # * add mgterm, from NetBSD -TD
22227 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22228 # * change cons25w to use rs2 for reset rather than rs1 -TD
22229 # * add rc/sc to aixterm based on manpage -TD
22232 # * remove ncv from xterm-16color, xterm-256color
22235 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22238 # * add Eterm (Michael Jennings)
22241 # * add amiga-vnc entry.
22244 # * correct description of Top Gun Telnet.
22245 # * add kterm-color
22248 # * add qansi* entries from QNX ftp site.
22251 # * add Matrix Orbital entries by Eric Z. Ayers).
22252 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22256 # * add S0, E0 extensions to screen's entry -TD
22259 # * several corrections based on tic's new parameter-checking code -TD
22260 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22261 # bracketing sequences that reset video attributes (\E8 would restore
22265 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22268 # * improved scoansi, based on SCO man-page, and testing console,
22269 # scoterm with tack -TD
22272 # * modify kterm to use acsc via SCS controls.
22275 # * screen 3.9.8 allows xterm mouse controls to pass-through
22278 # * remove spurious "%|" from some xterm entries.
22281 # * modify 'screen' khome/kend to match screen 3.09.08
22282 # * add examples of 'screen' customization (screen.xterm-xfree86,
22283 # screen.xterm-r6, screen.teraterm) -TD
22286 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22287 # * add "Apple_Terminal" entries -Benjamin Sittler
22288 # * remove time-delays from "Apple_Terminal" entries -TD
22289 # * make sgr entries time-delays consistent with individual caps -TD
22292 # * corrected/updated screen.xterm-xfree86
22295 # * ELKS descriptions, from Federico Bianchi
22296 # * add u6 (CSR) to Eterm (Michael Jennings).
22299 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22300 # tic which handles names no longer than 14 characters. Add
22301 # corresponding descriptions for the Darwin PowerPC console named
22302 # "xnuppc" -Benjamin Sittler
22305 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22308 # * add "putty" entry -TD
22309 # * updated "Apple_Terminal" entries -Benjamin Sittler
22312 # * add ms-vt100-color entry -TD
22313 # * add "konsole" entries -TD
22316 # * update gnome entry to Redhat 7.2 -TD
22319 # * add kf13-kf48 strings to cons25w -TD
22320 # * add pcvt25-color entry -TD
22321 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22322 # * improve some features of scoansi entry based on SCO's version -TD
22323 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22326 # * add kcbt to screen entry -TD
22329 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22332 # * split out linux-basic entry, making linux-c inherit from that, and
22333 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22334 # the history of this console type -TD
22335 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22336 # r/g/b parameters of initc are in the range 0 to 1000 -TD
22339 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
22342 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
22343 # in the latter -TD
22346 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
22347 # * ncr260wy350pp has only 16 color pairs -TD
22348 # * add sun-type4 from NetBSD -TD
22349 # * update xterm-xfree86 to current (patch 170) -TD
22350 # * add screen-bce, screen-s entries -TD
22351 # * add xterm-1002, xterm-1003 entries -TD
22354 # * update homepage for Top Gun Telnet/SSH
22357 # * reduce duplication in emx entries, added emx-base -TD
22360 # * corrected acs for screen.teraterm -TD
22361 # * add tkterm entry -TD
22364 # * cygwin changes from Charles Wilson:
22365 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
22366 # primary instead of nxterm, to match XFree86's xterm.terminfo
22367 # usage and to prevent circular links.
22368 # (rxvt): add additional codes from rxvt.org.
22369 # (rxvt-color): new alias
22370 # (rxvt-xpm): new alias
22371 # (rxvt-cygwin): like rxvt, but with special acsc codes.
22372 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
22373 # with a "native" MSWin GUI. Each takes different acsc codes,
22374 # which are both different from the "normal" rxvt's acsc.
22375 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
22376 # (cygwinDBG): ditto.
22379 # * update gnome terminal entries -TD
22382 # * add entries for djgpp 2.03 and 2.04 -TD
22385 # * add alias for vtnt -TD
22386 # * update xterm-xfree86 for XFree86 4.4 -TD
22389 # * add linux-vt (Andrey V Lukyanov)
22392 # * add screen.linux -TD
22395 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
22398 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
22399 # * add vt100+ and vt-utf8 entries -TD
22400 # * add uwin entry -TD
22403 # * add sgr strings to several common entries lacking them, e.g.,
22404 # screen, to make the entries more portable -TD
22405 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
22406 # * similar fixups for cvvis/cnorm various entries -TD
22409 # * remove 'ncv' from xterm-256color (patch 188) -TD
22413 # * add xterm-xf86-v44 -TD
22414 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
22415 # on G1 being used via an ISO-2022 escape sequence (report by
22416 # Juliusz Chroboczek) -TD
22417 # * add 'hurd' entry -TD
22420 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
22422 # * align with xterm #192's use of xterm-new -TD
22423 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
22424 # * make xterm-new the default "xterm" -TD
22427 # * minor fixes for emu -TD
22429 # * add rmam/smam to linux (Trevor Van Bremen)
22430 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
22431 # * fixes for avatar0 -TD
22432 # * fixes for vp3a+ -TD
22435 # * add xterm-pc-fkeys -TD
22436 # * review/update gnome and gnome-rh90 entries (prompted by
22437 # Redhat Bugzilla #122815) -TD
22438 # * review/update konsole entries -TD
22439 # * add sgr, correct sgr0 for kterm and mlterm -TD
22440 # * correct tsl string in kterm -TD
22443 # * make ncsa-m rmacs/smacs consistent with sgr -TD
22444 # * add sgr, rc/sc and ech to syscons entries -TD
22445 # * add function-keys to decansi -TD
22446 # * add sgr to mterm-ansi -TD
22447 # * add sgr, civis, cnorm to emu -TD
22448 # * correct/simplify cup in addrinfo -TD
22449 # * corrections for gnome and konsole entries
22450 # (Redhat Bugzilla #122815) -Hans de Goede
22451 # * modify DEC entries (vt220, etc), to add sgr string, and to use
22452 # ISO-2022 strings for rmacs/smacs -TD
22455 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
22458 # * improved putty entry -Robert de Bath
22461 # * remove dch/dch1 from rxvt because they are implemented inconsistently
22462 # with the common usage of bce/ech -TD
22463 # * remove khome from vt220 (vt220's have no home key) -TD
22464 # * add rxvt+pcfkeys -TD
22467 # * modify several entries to ensure xterm mouse and cursor visibility
22468 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
22469 # Eterm, screen. (The xterm entries are left alone - old ones for
22470 # compatibility, and the new ones do not require this change) -TD
22473 # * add morphos entry -Pavel Fedin
22474 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
22475 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
22478 # * update wsvt25 entry -TD
22481 # * update pairs for xterm-88color and xterm-256color to reflect the
22482 # ncurses extended-color support -TD
22485 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
22486 # * add aixterm-16color to demonstrate 16-color capability -TD
22489 # * add media-copy to vt100 -TD
22490 # * corrected acsc string for vt52 -TD
22493 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
22495 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
22498 # * re-corrected acsc string for vt52 -TD
22501 # * corrected sun-il sgr string which referred to bold and underline -TD
22502 # * add sun-color entry -TD
22505 # * modify sgr0 in several entries to reset alternate-charset as in the
22507 # * modify sgr string of prism9 to better match the individual
22511 # * correct order of use= in rxvt-basic -TD
22514 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
22517 # * other minor fixes to cygwin based on tack -TD
22518 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
22521 # * add nsterm-16color entry -TD
22522 # * remove ncv flag from xterm-16color -TD
22523 # * remove setf/setb from xterm-256color to match xterm #209 -TD
22524 # * update mlterm entry to 2.9.2 -TD
22527 # * fixes to make nsterm-16color match report
22528 # by Christian Ebert -Alain Bench
22531 # * add xterm+256color building block -TD
22532 # * add gnome-256color, putty-256color, rxvt-256color -TD
22535 # * add hpterm-color -TD
22538 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
22539 # * add gnome-fc5 (prompted by GenToo #122566) -TD
22540 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
22541 # * improve xterm-256color by combining the ibm+16color setaf/setab
22542 # strings with SGR 48. The setf/setb strings also are cancelled here
22543 # rather than omitted so derived entries will cancel those also -Alain
22547 # * add some notes regarding copyright to terminfo.src -TD
22548 # * use rxvt+pcfkeys in Eterm -TD
22549 # * remove km and flash from gnome, Eterm and rxvt since they do not work
22550 # as one would expect (km sends ESC rather than setting the 8th bit
22552 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
22553 # * add konsole-solaris -TD
22556 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
22557 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
22558 # * modify xterm-24 to inherit from "xterm" -TD
22559 # * add xiterm entry -TD
22560 # * add putty-vt100 entry -TD
22561 # * corrected spelling of Michael A Dorman's name, prompted by
22562 # http://www.advogato.org/person/mdorman/diary.html -TD
22565 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
22566 # * update xterm+pcfkeys to match xterm #216 -TD
22569 # * make descriptions of xterm entries consistent with its terminfo -TD
22572 # * add xfce, mgt -TD
22575 # * correct acsc string in kterm -TD
22578 # * add kon entry -TD
22579 # * remove invis from linux and related entries, add klone+sgr8 for those
22580 # that implement the feature (or have not been shown to lack it) -TD
22583 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
22584 # * minor improvements to rxvt+pcfkeys -TD
22587 # * fix a few typos in if/then/else expressions -TD
22590 # * add several GNU Screen variations with 16- and 256-colors, and
22591 # status line (Alain Bench).
22594 # * add Newbury Data entries (Jean-Charles Billaud).
22597 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
22600 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
22601 # * add konsole-256color entry -TD
22604 # * add 9term entry (request by Juhapekka Tolvanen) -TD
22607 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
22608 # * add shift-control- and control-modified keys for rxvt editing
22610 # * update mlterm entry to 2.9.3 -TD
22611 # * add mlterm+pcfkeys -TD
22614 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
22615 # xterm+pcc0, etc., to make the corresponding building blocks reflect
22616 # xterm's capabilities -TD
22617 # * add mrxvt entry -TD
22618 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
22621 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
22624 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
22625 # xterm starting with patch #216 -TD
22626 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
22627 # to match xterm #230 -TD
22628 # * extend xterm+pccX entries to match xterm #230 -TD
22629 # * add xterm+app, xterm+noapp, from xterm #230 -TD
22630 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
22633 # * add screen.rxvt -TD
22636 # * add screen+fkeys (prompted by Debian #478094) -TD
22639 # * add screen.mlterm -TD
22640 # * improve mlterm and mlterm+pcfkeys -TD
22643 # * add Eterm-256color, Eterm-88color -TD
22644 # * add rxvt-88color -TD
22647 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
22648 # original to teraterm2.3 -TD
22649 # * update "gnome" to 2.22.3 -TD
22650 # * update "konsole" to 1.6.6 -TD
22651 # * add "aterm" -TD
22652 # * add "linux2.6.26" -TD
22655 # * change several \E[2g (clear tab at current column) to \E[3g
22656 # (clear all tabs) to match definition for tbc capability -TD
22659 # * add eterm-color -TD
22662 # * add screen.Eterm -TD
22665 # * correct typo in pfkey of ansi.sys-old
22666 # (report by Kalle Olavi Niemitalo)
22667 # * move function- and cursor-keys from emx-base to ansi.sys, and create
22668 # a pfkey capability which handles F1-F48 -TD
22671 # * add vwmterm entry (Bryan Christ)
22674 # * change ncv and op capabilities in sun-color to match Sun's entry for
22675 # this (report by Laszlo Peter)
22676 # * improve interix smso by using reverse rather than bold (report by
22677 # Kristof Zelechovski).
22680 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
22681 # * add linux-16color (Benjamin Sittler)
22682 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
22683 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
22684 # * add ccc and initc capabilities to xterm-16color -TD
22687 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
22690 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
22693 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
22694 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
22697 # * add bterm (bogl 0.1.18) -TD
22698 # * minor fix to rxvt+pcfkeys -TD
22701 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
22704 # * add several screen-bce.XXX entries -TD
22707 # * modify screen-bce.XXX entries to exclude ech, since screen's color
22708 # model does not clear with color for that feature -TD
22711 # * rename atari and st52 to atari-old, st52-old, use newer entries from
22712 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
22715 # * add mlterm+256color entry -TD
22718 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
22719 # the alternate character set (patch by Nicholas Marriott)
22722 # * improve acsc for vt52 (Benjamin Sittler)
22723 # * modify nsterm entries for consistent sgr/sgr0 -TD
22724 # * modify xnuppc entries for consistent sgr/sgr0 -TD
22725 # * add invis to tek4115 sgr -TD
22728 # * reformat acsc strings to canonical format -TD
22731 # * add "XT" capability to entries for terminals that support both
22732 # xterm-style mouse- and title-controls, for "screen" which
22733 # special-cases TERM beginning with "xterm" or "rxvt" -TD
22736 # * fill in no-parameter forms of cursor-movement where a parameterized
22737 # form is available -TD
22738 # * fill in missing cursor controls where the form of the controls is
22740 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
22743 # * correct comparison used for setting 16-colors in linux-16color
22744 # entry (Novell #644831) -TD
22745 # * improve linux-16color entry, using "dim" for color-8 which makes it
22746 # gray rather than black like color-0 -TD
22749 # * make "vte" the principal entry defining "gnome", since GNOME terminal
22750 # is merely one of several terminals whose behavior is provided by this
22754 # * fix typo in rmso for tek4106 -Goran Weinholt
22757 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
22758 # * also suppress ncv in konsole-base -TD
22761 # * add U8 feature to denote entries for terminal emulators which do not
22762 # support VT100 SI/SO when processing UTF-8 encoding -TD
22763 # * add xterm-utf8 as a demo of the U8 feature -TD
22766 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
22769 # * update minix entry to minix 3.2 (Thomas Cort).
22772 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
22773 # * remove a backslash which continued comment, obscuring altos3
22774 # definition with OpenBSD toolset (Nicholas Marriott).
22777 # * add/use xterm+tmux chunk from xterm #271 -TD
22778 # * resync xterm-new entry from xterm #271 -TD
22779 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
22780 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
22781 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
22784 # * add kich1 to sun (Yuri Pankov)
22785 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
22788 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
22791 # * minor cleanup of X-terminal emulator section -TD
22792 # * add terminator entry -TD
22793 # * add simpleterm entry -TD
22796 # * add xterm+kbs fragment from xterm #272 -TD
22799 # * add pccon entries for OpenBSD console (Alexei Malinin)
22802 # * corrected old changelog comments -TD
22805 # * add putty-sco -TD
22808 # * add mach-gnu (Samuel Thibault)
22809 # * add mach-gnu-color, tweaks to mach-gnu -TD
22810 # * make sgr for sun-color agree with smso -TD
22811 # * make sgr for prism9 agree with other caps -TD
22812 # * make sgr for icl6404 agree with other caps -TD
22813 # * make sgr for ofcons agree with other caps -TD
22814 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
22815 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
22816 # * make sgr for avt-ns agree with other caps -TD
22819 # * make sgr for xterm-pcolor agree with other caps -TD
22820 # * make sgr for att5425 agree with other caps -TD
22821 # * make sgr for att630 agree with other caps -TD
22822 # * make sgr for linux entries agree with other caps -TD
22823 # * make sgr for tvi9065 agree with other caps -TD
22824 # * make sgr for ncr260vt200an agree with other caps -TD
22825 # * make sgr for ncr160vt100pp agree with other caps -TD
22826 # * make sgr for ncr260vt300an agree with other caps -TD
22827 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
22828 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
22831 # * correct order of use-clauses in st-256color -TD
22834 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
22837 # * document all of the user-defined capabilities in one place -TD
22838 # * add XT to some places to improve usefulness for other applications
22839 # than screen, which would like to pretend that xterm's title is
22840 # a status-line. -TD
22841 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
22842 # of ordering and overrides -TD
22845 # * add msgr to vt420, similar DEC vtXXX entries -TD
22846 # * add several missing vt420 capabilities from vt220 -TD
22847 # * factor out ansi+pp from several entries -TD
22848 # * change xterm+sl and xterm+sl-twm to include only the status-line
22849 # capabilities and not "use=xterm", making them more generally useful
22850 # as building-blocks -TD
22851 # * add dec+sl building block, as example -TD
22854 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
22855 # * add eslok flag to dec+sl -TD
22856 # * dec+sl applies to vt320 and up -TD
22857 # * drop wsl width from xterm+sl -TD
22858 # * reuse xterm+sl in putty and nsca-m -TD
22859 # * add ansi+tabs to vt520 -TD
22860 # * add ansi+enq to vt220-vt520 -TD
22863 # * remove p6 (bold) from opus3n1+ for consistency -TD
22864 # * remove acs stuff from env230 per clues in Ingres termcap -TD
22865 # * modify env230 sgr/sgr0 to match other capabilities -TD
22866 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
22867 # * make sgr for dku7202 agree with other caps -TD
22868 # * make sgr for ibmpc agree with other caps -TD
22869 # * make sgr for tek4107 agree with other caps -TD
22870 # * make sgr for ndr9500 agree with other caps -TD
22871 # * make sgr for sco-ansi agree with other caps -TD
22872 # * make sgr for d410 agree with other caps -TD
22873 # * make sgr for d210 agree with other caps -TD
22874 # * make sgr for d470c, d470c-7b agree with other caps -TD
22877 # * rewrite vt520 entry based on vt420 -TD
22878 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
22881 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
22882 # analysis by Martin Husemann).
22883 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
22884 # Onno van der Linden).
22885 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
22886 # * add kdch1, etc., to qvt108 -TD
22887 # * add dl1/il1 to some entries based on dl/il values -TD
22888 # * add dl to simpleterm -TD
22890 ######## SHANTIH! SHANTIH! SHANTIH!